kvmclock driver with vDSO support

[adam_fenn.io]

Summary

This is the work referenced by https://reviews.freebsd.org/D29531#663885, plus changes for the review feedback on D29531 that were relevant here as well (specifically, @kib's commenting input and @rpokala's + @imp's copyright header input).

Test Plan

Thus far, just basic testing on top of QEMU 4.2.1 + kernel 5.8.0 on Ubuntu 20.04 on Intel and AMD HW via:

• date
• syscall_timing
• sysctls debug.clock_show_io, debug.clock_do_io, kern.timecounter.hardware, and kern.timecounter.fast_gettime
• Using dtrace to sanity-check that sys_gettimeofday()/sys_clock_gettime() were/weren't being called as expected.
• zzz(8) plus the QEMU system_powerdown and system_wakeup commands (for test-driving the suspend/resume entry points).

I also tried the sysbench invocation in https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=216759#c11 and can confirm similar differences between using the HPET and using the kvmclock or TSC.

An example including some timing info:

user@test:~ % sysctl kern.timecounter
kern.timecounter.tsc_shift: 1
kern.timecounter.smp_tsc_adjust: 0
kern.timecounter.smp_tsc: 0
kern.timecounter.invariant_tsc: 0
kern.timecounter.fast_gettime: 1
kern.timecounter.tick: 1
kern.timecounter.choice: i8254(0) ACPI-fast(900) HPET(950) kvmclock(975) TSC(-100) dummy(-1000000)
kern.timecounter.hardware: kvmclock
kern.timecounter.alloweddeviation: 5
kern.timecounter.timehands_count: 2
kern.timecounter.stepwarnings: 0
kern.timecounter.tc.i8254.quality: 0
kern.timecounter.tc.i8254.frequency: 1193182
kern.timecounter.tc.i8254.counter: 59794
kern.timecounter.tc.i8254.mask: 65535
kern.timecounter.tc.ACPI-fast.quality: 900
kern.timecounter.tc.ACPI-fast.frequency: 3579545
kern.timecounter.tc.ACPI-fast.counter: 3543295
kern.timecounter.tc.ACPI-fast.mask: 16777215
kern.timecounter.tc.HPET.quality: 950
kern.timecounter.tc.HPET.frequency: 100000000
kern.timecounter.tc.HPET.counter: 1966409884
kern.timecounter.tc.HPET.mask: 4294967295
kern.timecounter.tc.kvmclock.quality: 975
kern.timecounter.tc.kvmclock.frequency: 1000000000
kern.timecounter.tc.kvmclock.counter: 3373140415
kern.timecounter.tc.kvmclock.mask: 4294967295
kern.timecounter.tc.TSC.quality: -100
kern.timecounter.tc.TSC.frequency: 1607988965
kern.timecounter.tc.TSC.counter: 513410333
kern.timecounter.tc.TSC.mask: 4294967295
user@test:~ % syscall_timing gettimeofday
Clock resolution: 0.000000002
test    loop    time    iterations      periteration
gettimeofday    0       1.000971171     24698568        0.000000040
gettimeofday    1       1.007769518     24866552        0.000000040
gettimeofday    2       1.001071247     24700412        0.000000040
gettimeofday    3       1.006630289     24832878        0.000000040
gettimeofday    4       1.003202891     24769714        0.000000040
gettimeofday    5       1.004513069     24790162        0.000000040
gettimeofday    6       1.005332074     24833956        0.000000040
gettimeofday    7       1.002384739     24735470        0.000000040
gettimeofday    8       1.007455964     24884169        0.000000040
gettimeofday    9       1.000256110     24708625        0.000000040
user@test:~ % sudo sysctl kern.timecounter.fast_gettime=0
kern.timecounter.fast_gettime: 1 -> 0
user@test:~ % syscall_timing gettimeofday
Clock resolution: 0.000000002
test    loop    time    iterations      periteration
gettimeofday    0       1.062566203     8546464 0.000000124
gettimeofday    1       1.037318670     8305737 0.000000124
gettimeofday    2       1.050000947     8410842 0.000000124
gettimeofday    3       1.049828515     8405755 0.000000124
gettimeofday    4       1.062561943     8522758 0.000000124
gettimeofday    5       1.037252041     8295647 0.000000125
gettimeofday    6       1.009902776     8103514 0.000000124
gettimeofday    7       1.029863208     8271323 0.000000124
gettimeofday    8       1.059883267     8462669 0.000000125
gettimeofday    9       1.009913686     8092699 0.000000124
user@test:~ % sudo sysctl kern.timecounter.fast_gettime=1
kern.timecounter.fast_gettime: 0 -> 1
user@test:~ % sudo sysctl kern.timecounter.hardware=TSC
kern.timecounter.hardware: kvmclock -> TSC
user@test:~ % syscall_timing gettimeofday
Clock resolution: 0.000000001
test    loop    time    iterations      periteration
gettimeofday    0       1.039693055     39156300        0.000000026
gettimeofday    1       1.059332059     39727049        0.000000026
gettimeofday    2       1.040353569     39121632        0.000000026
gettimeofday    3       1.050123063     39481224        0.000000026
gettimeofday    4       1.049670668     39530649        0.000000026
gettimeofday    5       1.062567179     39960000        0.000000026
gettimeofday    6       1.037282737     38908035        0.000000026
gettimeofday    7       1.062564063     39918185        0.000000026
gettimeofday    8       1.037147904     39045152        0.000000026
gettimeofday    9       1.009909895     38041308        0.000000026
user@test:~ % sudo sysctl kern.timecounter.fast_gettime=0
kern.timecounter.fast_gettime: 1 -> 0
user@test:~ % syscall_timing gettimeofday
Clock resolution: 0.000000001
test    loop    time    iterations      periteration
gettimeofday    0       1.000343476     9173210 0.000000109
gettimeofday    1       1.007733227     9233248 0.000000109
gettimeofday    2       1.051675824     9637613 0.000000109
gettimeofday    3       1.003205497     9195701 0.000000109
gettimeofday    4       1.006564792     9226628 0.000000109
gettimeofday    5       1.001095929     9169797 0.000000109
gettimeofday    6       1.007764181     9224751 0.000000109
gettimeofday    7       1.000836593     9169834 0.000000109
gettimeofday    8       1.006850768     9220051 0.000000109
gettimeofday    9       1.002965937     9190431 0.000000109
user@test:~ % sudo sysctl kern.timecounter.fast_gettime=1
kern.timecounter.fast_gettime: 0 -> 1
user@test:~ % sudo sysctl kern.timecounter.hardware=HPET
kern.timecounter.hardware: TSC -> HPET
user@test:~ % syscall_timing gettimeofday
Clock resolution: 0.000000011
test    loop    time    iterations      periteration
gettimeofday    0       1.001976650     361817  0.000002769
gettimeofday    1       1.007771340     363755  0.000002770
gettimeofday    2       1.007759790     364436  0.000002765
gettimeofday    3       1.002167610     361223  0.000002774
gettimeofday    4       1.005514150     363170  0.000002768
gettimeofday    5       1.004283770     363254  0.000002764
gettimeofday    6       1.003406260     361886  0.000002772
gettimeofday    7       1.006412230     362752  0.000002774
gettimeofday    8       1.049863580     378690  0.000002772
gettimeofday    9       1.006341930     363179  0.000002770
user@test:~ % sudo sysctl kern.timecounter.fast_gettime=0
kern.timecounter.fast_gettime: 1 -> 0
user@test:~ % syscall_timing gettimeofday
Clock resolution: 0.000000011
test    loop    time    iterations      periteration
gettimeofday    0       1.005940780     339403  0.000002963
gettimeofday    1       1.062578460     359351  0.000002956
gettimeofday    2       1.037196880     350767  0.000002956
gettimeofday    3       1.062579500     359486  0.000002955
gettimeofday    4       1.037203790     351224  0.000002953
gettimeofday    5       1.009921970     342757  0.000002946
gettimeofday    6       1.029915260     334432  0.000003079
gettimeofday    7       1.059815440     345772  0.000003065
gettimeofday    8       1.009940770     329601  0.000003064
gettimeofday    9       1.062575370     347237  0.000003060
user@test:~ %

[adam_fenn.io]

In D29733#691518, @dch wrote:

shall I just drop 11.* from the port, or do you want to make a patch for x86 & x64 versions?

Perhaps we drop 11.x from the port what with 11.x soon to be EOL'ed---does that seem reasonable to you, too?

[royger]

Thanks and sorry for the delay! Mostly nits, I think the only major question is whether you need to use the dma system to allocate the memory for the vcpu time infos. I think it would be fine to just use plain malloc.

lib/libc/x86/sys/__vdso_gettc.c

104

I think the inline here is IMO misleading, as you end up taking a pointer to the function when filling the tsc_selector struct, so the inline is just dropped.

358

I think it would be enough to just say that the TSC_STABLE is mandatory because TSCs must be synchronized across CPUs or else using vcpu time info of CPU 0 on for all CPUs would be wrong.

sys/dev/kvm_clock/kvm_clock.c

150

Do you really need to use the dma subsystem for this? Isn't it enough to just malloc a region of memory and use it?

You could then also use M_WAITOK maybe?

sys/x86/x86/pvclock.c

174

I think this should return EACCES as the file only allows opening in read-only mode.

223

Couldn't vDSO became functional at some later point (ie: when migrated to a different host) even if the current vcpu_time_info reports non-stable? I wonder whether we should just check if the stable flag is supported instead of also checking if it's currently set.

252

Given the list of arguments here I think we should consider creating a structure and passing a pointer to it, or rather fill some of the pvclock struct fields by the caller?

You could split the fields of pvclock between the public ones to be filled by the caller and the private ones.

258

Nit: I usually try to avoid splitting such log messages because grepping for them afterwards is not possible. I would rather try to place the message starting on the newline as you won't have to split it then.

308

Given the pvclock has a resolution of 1ns and that's fixed I think it would be fine to just hardcode this as 1us. It's not like PVCLOCK_RESOLUTION_NS can or will be modified anyway?

[adam_fenn.io]

Address @royger's review feedback.

[adam_fenn.io]

Thanks a lot for this latest round of feedback, @royger! Revised accordingly and/or discussion inline.

lib/libc/x86/sys/__vdso_gettc.c

358

I decided to just remove this comment altogether.

It was basically just attempting to point out how this flag can theoretically change at any time, which would explain how we could arrive at this location from binuptime() even though binuptime(), indirectly via tk_enabled, just observed PVCLOCK_FLAG_TSC_STABLE as set.

But I don't think it's as subtle of a point as I must have when I originally wrote this, and I can see how this comment might confuse if __vdso_pvclock_tsc() is read separately from binuptime().

sys/dev/kvm_clock/kvm_clock.c

150

Do you really need to use the dma subsystem for this? Isn't it enough to just malloc a region of memory and use it?

I'd decided against malloc() since it doesn't provide API-level alignment guarantees; while, implementation-wise, it does look like >= PAGE_SIZE-ed malloc(9) allocations will be page-aligned, my read of malloc(9) (particularly section IMPLEMENTATION NOTES) is that this should not be assumed by callers.

(FWIW, I had also noted (1) the precedent of hyperv's use of BUS_DMA(9) for its corresponding PV clock in-memory data and (2) internally, this draft's use of BUS_DMA(9) will ultimately do the same thing that the first draft was doing with its direct use of the physical memory pager).

Just recapping, the intention is that timeinfos be readily mmap-able---the allocation containing timeinfos should start and end on a page boundary (with any unused portion of the last page zeroed).

Does this choice make sense or am I missing something?

You could then also use M_WAITOK maybe?

This choice was considering use cases where the driver is loaded during boot (whether compiled in or via loader.conf(5)). My thinking was that a failure to satisfy a relatively small allocation like this during boot would be an indication of far greater problems and, as such, it wouldn't be worth adding any blocking+reclaims+retries to the boot process, especially since the system can still function without kvmclock.

But I suppose it's also ok to allow the reclaims+retries, so, I've switched bus_dmamem_alloc() from BUS_DMA_NOWAIT to BUS_DMA_WAITOK in this version as per this suggestion.

sys/x86/x86/pvclock.c

223

Right. But pvclock_tc_vdso_timehands{,32}() is called with each vDSO timehands update, so, such scenarios should be supported, no?

I think the (pvc->ti_vcpu0_page->flags & PVCLOCK_FLAG_TSC_STABLE) != 0 clause could, indeed, be dropped. But I included it thinking that, in the unstable case, we might as well short-circuit the vDSO codepath sooner than later---with this clause, the vDSO codepath decides to fall back to the syscall codepath after it looks at tk->tk_enabled in binuptime() whereas, without this clause, this decision will happen after the PVCLOCK_FLAG_TSC_STABLE flag check in __vdso_pvclock_tsc().

I obtained a rough measurement of the delta between these two versions of the unstable TSC codepath by inverting the PVCLOCK_FLAG_TSC_STABLE check in __vdso_pvclock_tsc() and then looking at syscall_timing gettimeofday numbers for (1) kern.timecounter.fast_gettime=0 and (2) kern.timecounter.fast_gettime=1. I figure, on my PVCLOCK_FLAG_TSC_STABLE test systems, (1) should roughly simulate the version where the code is left as-is and (2) should roughly simulate the version where this clause is dropped.

These syscall_timing gettimeofday numbers from (1) to (2) regressed from 116ns -> 146ns = +30ns on my AMD HW and 119ns -> 141ns = +22ns on my Intel HW. So, potentially non-negligible and makes sense to keep this clause in place (or achieve the same outcome in some other way)? What do you think?

[cperciva]

It looks like we need this for EC2 "T3" and "T3A" family instances, where apparently it's possible for a VM to bounce between CPUs running at different clock speeds(!!!) and the TSC-low timecounter is running into problems (https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=256781).

(I don't have anything to contribute to reviewing the change, just wanted to flag the EC2 environment as one where this is relevant.)

[royger]

Just replied to the most controversial part I think, will try to review the rest tomorrow. Thanks!

sys/dev/kvm_clock/kvm_clock.c

150

Do you really need to use the dma subsystem for this? Isn't it enough to just malloc a region of memory and use it?

I'd decided against malloc() since it doesn't provide API-level alignment guarantees; while, implementation-wise, it does look like >= PAGE_SIZE-ed malloc(9) allocations will be page-aligned, my read of malloc(9) (particularly section IMPLEMENTATION NOTES) is that this should not be assumed by callers.

Right, TBH I think malloc returning and address not aligned to a page boundary when allocating a region >= PAGE_SIZE would likely be a bug in the implementation.

(FWIW, I had also noted (1) the precedent of hyperv's use of BUS_DMA(9) for its corresponding PV clock in-memory data and (2) internally, this draft's use of BUS_DMA(9) will ultimately do the same thing that the first draft was doing with its direct use of the physical memory pager).

Just recapping, the intention is that timeinfos be readily mmap-able---the allocation containing timeinfos should start and end on a page boundary (with any unused portion of the last page zeroed).

Does this choice make sense or am I missing something?

Well, I think it's overly complicated (and cumbersome due to all the initialization involved) to use bus_dma just to allocate a memory region that's page aligned. I'm sure there are already instances in-kernel that assume that malloc(PAGE_SIZE) returns a page. I wouldn't be opposed to using:

sc->timeinfos = malloc(size, ...);
if ((sc->timeinfos & PAGE_MASK) != 0) {
     device_printf(..., "failed to allocate aligned memory region");
    KASSERT(0, ("Failed to allocate page aligned region"));
    return (ENOMEM);
}

But I understand others might have different opinions. Maybe @kib could provide some insight on whether there's another way to allocate aligned memory regions without having to resort to bus_dma, I don't have that much insight on the VM subsystem.

You could then also use M_WAITOK maybe?

This choice was considering use cases where the driver is loaded during boot (whether compiled in or via loader.conf(5)). My thinking was that a failure to satisfy a relatively small allocation like this during boot would be an indication of far greater problems and, as such, it wouldn't be worth adding any blocking+reclaims+retries to the boot process, especially since the system can still function without kvmclock.

Likely, if we fail to satisfy such small allocation it's likely the kernel won't be able to finish booting anyway. Adding a comment as to why BUS_DMA_NOWAIT is used (ie: not because the context prevents using BUS_DMA_WAITOK) would be OK also.

But I suppose it's also ok to allow the reclaims+retries, so, I've switched bus_dmamem_alloc() from BUS_DMA_NOWAIT to BUS_DMA_WAITOK in this version as per this suggestion.

[imp]

sys/dev/kvm_clock/kvm_clock.c

150

While malloc(9) can't give these guarantees, uma(8) can. Creating the tag, allocating and loading it are basically creating a uma zone behind the scenes and using them directly would be better than using busdma just to get alignment.

[kib]

sys/dev/kvm_clock/kvm_clock.c

150

We have malloc_domainset_aligned(), added exactly to export the alignment guarantees from the malloc subsystem.

[royger]

sys/dev/kvm_clock/kvm_clock.c

150

Thanks! That's exactly what's needed here. I think this function has not been added to the malloc(9) man page?

Would it make sense to also add some syntactic sugar and introduce a:

#define malloc_aligned(s, a, t, f) malloc_domainset_aligned(s, a, t, DOMAINSET_RR(), f)

Or similar.

[kib]

sys/dev/kvm_clock/kvm_clock.c

150

Of course, feel free to add. There were no users for it until now.

[adam_fenn.io]

Use malloc_domainset_aligned() as per @kib's suggestion.

[adam_fenn.io]

Yes, thanks a lot, @kib, for pointing out malloc_domainset_aligned()! Much better! (Doh---I think I did see this a while back but misinterpreted its relative lack of use and absence from malloc(9) as discouraging new uses).

I've switched to malloc_domainset_aligned() for now so that this work isn't potentially blocked on separate submission(s) to add a malloc_aligned() and update malloc(9) etc, figuring we can easily switch over to such a malloc_aligned() if/when appropriate.

[kib]

lib/libc/x86/sys/__vdso_gettc.c

363

I do not quite follow this. Why do you need to set pvclock_vcpu_info to MAP_FAILED in advance, during init?

Basically, this introduces somewhat unpleasant and very hard to diagnose case, where two threads happen to execute e.g. gettimeofday(), and then one of them falls back to syscall. Unpleasant part is that on the next gettimeofday() call this thread would use vdso path, and kernel vs. usermode timecounters might be relatively off.

I tried to avoid this with HPET. Also note use of acq/rel atomics to not rely implicitly on x86 TSO.

sys/dev/kvm_clock/kvm_clock.c

96

This blank line is excessive.

227

Excessive blank line.

229

And this one. It would be too much spam to comment about all of them.

253

Why do you need newbus attachment for this thing? Due to the clock kobj interface? But is it required?

sys/x86/x86/pvclock.c

150

Please do not use these linuxisms.

I suspect you need load_acq(&wc->version) instead of these two lines ...

153

.. and then atomic_thread_fence_acq() instead of this rmb(). But where is the writer?

[royger]

sys/x86/x86/pvclock.c

153

The writer is the hypervisor.

[adam_fenn.io]

Initial/partial round of addressing @kib's feedback.

[adam_fenn.io]

Thanks a lot for the review/feedback, @kib! I'm thinking about the questions raised by the init-related item; this revision attempts to address the other items in the meantime.

lib/libc/x86/sys/__vdso_gettc.c

363

hm...

Yeah, this was assuming that it's always "ok"---in that a thread will never see a syscall-based time reading that is less than a previous syscall- or vDSO-based time reading---for a thread to fall back to the syscall path and, based on that assumption, was deliberately allowing the described race in exchange for simplified init code.

If it can't be assumed to be safe to switch back and forth between the vDSO and syscall codepaths, then maybe we can't currently support the vDSO codepath for this clock source as the timekeeping code presently stands. (I'll think about this more).

But doesn't the hyperv PV TSC vDSO codepath make this same assumption, since a thread can end up switching between the vDSO and syscall codepaths at any time based on whether TscSequence == 0 (hyperv_ref_tsc->tsc_seq == 0)?

I want to make sure I have a correct and detailed understanding of the specific vDSO/syscall mismatch problem(s) you're referencing. Would you be able to provide example(s) of the specific way(s) that syscall-based and vDSO-based time values can differ that are being referenced here?

I think I can see a case where two calls to clock_gettime() for CLOCK_MONOTONIC_FAST or CLOCK_UPTIME_FAST---which only use th_offset without adding the subsequent delta---could lead to the second call's value being less than the first. This would happen if a thread managed to make a syscall-based reading followed by a vDSO-based reading that both occurred after the in-kernel timehands update but before the corresponding vDSO-based timehands update.

Is this an example of the sorts of cases you're thinking of?

Am I understanding correctly if I'm thinking that this same scenario but for CLOCK_{MONOTONIC,UPTIME}{,_PRECISE}---which use th_offset plus a th_offset_count-relative delta---would not have this problem because the th_offset_count-based delta that would be included in each reading would be relative to its respective th_offset value?

sys/dev/kvm_clock/kvm_clock.c

253

Right, all of this is as per the clock/RTC subsystem (sys/clock.h, kern/subr_rtc.c), which does use the clock kobj interface's entry points.

[adam_fenn.io]

Switch the vDSO and syscall codepaths over to a common (and freestanding) version of __vdso_gettc_rdtsc().

(A previous revision accidentally switched the vDSO codepath from __vdso_gettc_rdtsc() to rdtsc(); this fixes that).

[kib]

Can you extract the userspace/kernel code unification with rdtsc_ordered.h into separate patch?

sys/x86/include/_rdtsc_ordered.h

50 ↗

(On Diff #92030)

We do not indent function definitions in macros typically. Please remove these 4 spaces.

77 ↗

(On Diff #92030)

There is absolutely no reason to defined this macro. Both kernel and userspace variants are used once, so you could just put the corresponding code directly into libc and kernel, and avoid obfuscation through the macro.

In fact, I think that the better approach is to avoid macros at all. Put the code you want to share (as I understand, this is DEFINE_RDTSC_ORDERED_COMMON) into e.g. sys/x86/include/rdtsc_fenced.h directly, and include it into libc "vdso" and kernel rdtsc.h

[adam_fenn.io]

Rebase, address @kib's review feedback, and related clean-up.

(Regarding rdtsc_ordered() and rdtscp_aux()---I plan to split these into separate submissions, but, before doing so, figure we might as well wait to see if they are still present in an approved version of this submission).

[adam_fenn.io]

No functional changes intended. Since the last revision:

• Rebase again to pick up malloc_aligned() now that D31004 has been committed.
• kvm_clock_attach(): Use malloc_aligned() instead of malloc_domainset_aligned().
• Split out freestanding portions into separate submissions.

[kib]

sys/dev/kvm_clock/kvm_clock.c

113

if ((regs[0] & (KVM_FEATURE_CLOCKSOURCE | KVM_FEATURE_CLOCKSOURCE2)) == 0)

144

Should this case be assert? Is it possible that _CLOCKSOURCE feature disappears?

149

malloc() for PAGE_SIZE and larger is a strange choice. Why not use kmem_malloc()?

For instance, ldt allocation on x86 uses kmem_malloc(), and it is quite similar to kvm clock case.

[adam_fenn.io]

Address @kib's feedback.

[adam_fenn.io]

sys/dev/kvm_clock/kvm_clock.c

149

I see that kmem_malloc(), internally, always returns page-aligned allocations, but does it formally guarantee this condition at the API level like malloc_{,domainset_}aligned(9) do? There also seem to be so few uses of it relative to malloc(9), especially among drivers---should we maintain that precedent here?

[kib]

sys/dev/kvm_clock/kvm_clock.c

149

Yes, the kmem_malloc() KPI fundamental property is that it operates on the page granularity. As I said, the intent there (kvmclock) matches the KPI purpose perfectly. It is one-off allocation from the platform-specific driver, which is tightly integrated with the rest of the system.

[adam_fenn.io]

Address @kib's feedback.

[adam_fenn.io]

sys/dev/kvm_clock/kvm_clock.c

149

Ok, sounds good, then. Thanks for the clarification!

[kib]

sys/dev/kvm_clock/kvm_clock.c

149

Outer () are not needed.

153

round_page() is not needed, kmem_malloc() handles roundup internally

[adam_fenn.io]

Address @kib's feedback.