Paths

Table of Contentst

-
sys/
-
crypto/ccp/
-
ccp/
3
ccp.c
-
dev/
-
cxgbe/crypto/
-
crypto/
3
t4_crypto.c
-
sec/
3
sec.c
-
geom/eli/
-
eli/
3
g_eli.c
-
g_eli_privacy.c
-
kern/
-
subr_bus_dma.c
-
opencrypto/
-
criov.c
-
crypto.c
-
cryptodev.h
-
cryptosoft.c

geli: use unmapped I/O
ClosedPublic
Actions

Authored by asomers on Jul 14 2020, 8:04 PM.

Details

Reviewers

markj
kib
jmg
jhb

Group Reviewers

manpages

Commits

rS364800: geli: use unmapped I/O
rS364799: crypto(9): add CRYPTO_BUF_VMPAGE

Summary

geli: use unmapped I/O

Use unmapped I/O for geli. Unlike most geom providers, geli needs to
manipulate data on every read or write. Previously it used mapped bios; now
it uses sf_buf(9). This change adds two additional data copies on reads
(none on writes), but still ends up being faster due to less memory mapping
activity.

On my 16-core, dual socket server using geli on top of md(4) devices, this
change increases geli IOPs by about 3x.

Note that geli still can't use unmapped I/O when data integrity verification
is enabled.

Test Plan

geli's ATF test suite, plus a bespoke benchmark program.

Diff Detail

Repository

rS FreeBSD src repository - subversion

Lint

Lint Passed

Unit

No Test Coverage

Build Status

Buildable 32444
Build 29921: arc lint + arc unit

Event Timeline

There are a very large number of changes, so older changes are hidden. Show Older Changes

Harbormaster completed remote builds in B32390: Diff 74602.Jul 17 2020, 10:56 PM

kib added inline comments.Jul 17 2020, 11:12 PM

sys/geom/eli/g_eli_privacy.c
311	It is not safe to allocate more than one sf buf with blocking. Imagine that there are N total sf bufs in the system, and you have N threads trying to blockingly allocate 2 sf bufs each. The resulting deadlock is real. For instance, sendfile code only blocks for the first sfbuf allocation, all later allocs are non-blocking and code adopts to possible failure. Of course this is only relevant for arches without direct map.

asomers added inline comments.Jul 17 2020, 11:36 PM

sys/geom/eli/g_eli_privacy.c
311	So I need to ensure that any geli worker thread will only block on allocation for up to 1 buffer at a time. Should that be one buffer for the entire thread, or just one buffer for each bio?

asomers added inline comments.Jul 18 2020, 2:06 AM

sys/geom/eli/g_eli_privacy.c
311	Nevermind, I'm going to do something else instead. But I need to build an x86 head VM first to test it. Don't expect new code until tomorrow.

Fix deadlock during out-of-sf_buf condition

If insufficient sf_bufs are available, map the bio instead.
Tested on x86 with an artificially restricted sf_buf pool.

Harbormaster completed remote builds in B32402: Diff 74624.Jul 18 2020, 4:14 PM

kib added inline comments.Jul 18 2020, 10:08 PM

sys/geom/eli/g_eli_privacy.c
306	Note that this malloc(9) is not needed on DMAP arches, it only adds overhead. Generally, malloc(9) on write path is the source of deadlocks, but probably it is too late to worry about geli. I probably should suggest this explicitly: use unmapped path only on DMAP arches, leave current transient remapping when DMAP is not available.
sys/kern/subr_bus_dma.c
667	We have b_bus_dmamap_load_ma() which is more efficient than roundtrip through sf_buf_kva()->pmap_kextract() from bus_dmamap_load_buffer(). I am not sure how easy is to pass bio_ma up to this point, but it is definitely better than use VA-based load_buffer() in _bus_dmamap_load_sf_buf(). It might be worth reconstructing bio_ma[] from sf_buf array with sf_buf_page() if passing bio_ma is too problematic.

asomers added inline comments.Jul 19 2020, 4:19 AM

sys/geom/eli/g_eli_privacy.c
306	So you think that sf_buf would be too slow on non-DMAP arches to be worth using? Ok, that's easy. But why do you say that this malloc is not needed? Are you suggesting that crypto(9) work on an array of vm_page pointers instead or even on a struct bio ?

kib added inline comments.Jul 19 2020, 12:18 PM

sys/geom/eli/g_eli_privacy.c
306	Rather I think that non-DMAP arches are already slow, and make the efforts to speed up DMAP arches too hard. I am saying that malloc() is not needed because you already have the bio_ma array and on DMAP arches it is same as the array of sf_bufs. Crypto(9) operating directly on array of vm_pages is the best option, I think. At least, when I worked on unmapped io and busdma, directly taking array of vm_pages was the option that required the minimum amount of plumbing comparing with any other case.

Use a vm_page_t array instead of sf_buf, only on DMAP architectures.

And make g_io_bio_copyin a private function to geli

Harbormaster completed remote builds in B32444: Diff 74707.Jul 20 2020, 5:57 PM

Now I am confused. It seems that the new patch works on the page at the time, unless I missed a detail. Then, if we return to the design where you used sf bufs, you actually do not need more then one sf_buf at the time. I am not stating that it is possible to changing the patch back to sf_bufs, since it might be impossible to use sleepable allocation, in which case you would need to retract to transient mapping. But if this is not issue, then 'single sf buf at a time' might be an option.

I thought that sometimes geli might need to see more than page, I know that geli is the one of the providers where buffer size can be larger than the page size.

sys/dev/cxgbe/crypto/t4_crypto.c
277	Look at e.g. sys/powerpc/include/vmparam.h. PMAP_HAS_DMAP can be runtime value.

In D25671#569908, @kib wrote:

Now I am confused. It seems that the new patch works on the page at the time, unless I missed a detail. Then, if we return to the design where you used sf bufs, you actually do not need more then one sf_buf at the time. I am not stating that it is possible to changing the patch back to sf_bufs, since it might be impossible to use sleepable allocation, in which case you would need to retract to transient mapping. But if this is not issue, then 'single sf buf at a time' might be an option.

Yes, I think you're missing a detail. g_eli_crypto_run creates one crypto request per sector. A request may span multiple pages if either:

The user's buffer was not page-aligned, and spanned a page boundary, and/or
The sector size is larger than the page size.

sys/dev/cxgbe/crypto/t4_crypto.c
277	Darn! Ok, I can make it a runtime check. Unfortunately, that's going to add a bunch of useless code for arches like x86 where the dmap is never defined.

mjg added inline comments.Jul 20 2020, 9:19 PM

sys/dev/cxgbe/crypto/t4_crypto.c
277	You can make the check conditional on a compile-time define that the particular arch needs it.

kib added inline comments.Jul 20 2020, 9:20 PM

sys/dev/cxgbe/crypto/t4_crypto.c
277	I think you want #ifdef PMAP_HAS_DMAP if (PMAP_HAS_DMAP) { ... } #endif

asomers added inline comments.Jul 20 2020, 9:28 PM

sys/dev/cxgbe/crypto/t4_crypto.c
277	No, that won't work, because it's defined on all arches. It's just that on some it's defined to 0. At least on those arches, the compiler can eliminate some of the code as dead.

kib added inline comments.Jul 20 2020, 9:49 PM

sys/dev/cxgbe/crypto/t4_crypto.c
277	#if PMAP_HAS_DMAP if (PMAP_HAS_DMAP) { ... } #endif (#if instead of #ifdef)

Allow PMAP_HAS_DMAP to change at runtime

This does somewhat increase code size on arches like x86, but at least the code
is more readable without all those #ifdefs.

Harbormaster completed remote builds in B32448: Diff 74721.Jul 20 2020, 9:52 PM

Conditionally compile most CRYPTO_BUF_VMPAGE code

Harbormaster completed remote builds in B32456: Diff 74750.Jul 21 2020, 4:44 PM

kib added inline comments.Jul 21 2020, 10:03 PM

sys/geom/eli/g_eli_privacy.c
193	Why do you clear the flag ?
sys/opencrypto/criov.c
68	I would not use VM_PAGE_ prefix for something not coming from vm_page.{h,c}.
156	Again, please do not use vm_page_ prefix for something not coming from vm_page.{c,h}.
184	() are not needed. also you can use atop() there
185	Is this same as `skip = trunc_page(skip);` ?
211	`return (processed);`

asomers marked 4 inline comments as done.Jul 21 2020, 10:31 PM

asomers added inline comments.

sys/geom/eli/g_eli_privacy.c
193	Because during writes, `g_eli_crypto_run` mallocs a new buffer and points `bp->bio_data` to it. So the bio is mapped now if it wasn't before.
sys/opencrypto/criov.c
185	Yes

kib added inline comments.Jul 21 2020, 10:39 PM

sys/geom/eli/g_eli_privacy.c
193	Either this should be stated as comment, or BIO_UNMAPPED cleared at the point where you reset bio_data, or both.

Respond to kib's comments, mostly style. Also, rebase.

Harbormaster completed remote builds in B32465: Diff 74770.Jul 22 2020, 2:36 AM

markj added a reviewer: jhb.Jul 22 2020, 1:47 PM

A couple of suggestions that IMO improve layering:

Define a constant for use by the crypto subsystem and consumers instead of sprinkling PMAP_HAS_DMAP.
Avoid conditionally defining struct members and code when possible, especially in headers. This removes the need to import machine/param.h in crypto headers.
Use a more generic name instead of VM_PAGE or VMPAGE to refer to unmapped cryptops. UNMAPPED would be a bit clearer and is consistent with GEOM and the buffer cache. PHYSMEM might be another.

sys/opencrypto/criov.c
68	I agree.
165	Style: missing space after the second `*`. There are other instances of this below.

In D25671#570483, @markj wrote:

Avoid conditionally defining struct members and code when possible, especially in headers. This removes the need to import machine/param.h in crypto headers.

Ok, we've reached the bikeshedding point of the review. @markj frowns on conditional compilation, but @mjg and @kib request it. I tend to agree with Mark in this case, just for the sake of readability. So what shall we do?

In D25671#570496, @asomers wrote:

In D25671#570483, @markj wrote:

Avoid conditionally defining struct members and code when possible, especially in headers. This removes the need to import machine/param.h in crypto headers.

Ok, we've reached the bikeshedding point of the review.

Well, maybe @jhb has some more interesting opinions on the change since he has been doing most of the recent work on opencrypto.

@markj frowns on conditional compilation, but @mjg and @kib request it. I tend to agree with Mark in this case, just for the sake of readability. So what shall we do?

To be clear, I frown on conditional compilation in headers when it's not strictly necessary. In my experience conditional definition of struct members leads to fragility: debuggers might end up with an inconsistent view of the structure layout, it's easy to forget that structures might be used by userspace, etc.

In D25671#570510, @markj wrote:

In D25671#570496, @asomers wrote:

In D25671#570483, @markj wrote:

Avoid conditionally defining struct members and code when possible, especially in headers. This removes the need to import machine/param.h in crypto headers.

Ok, we've reached the bikeshedding point of the review.

Well, maybe @jhb has some more interesting opinions on the change since he has been doing most of the recent work on opencrypto.

@markj frowns on conditional compilation, but @mjg and @kib request it. I tend to agree with Mark in this case, just for the sake of readability. So what shall we do?

I did not asked for strict conditional compilation, I suggested to only accept unmapped bios when platform has DMAP and as consequence can very cheaply provide VA access to the unmapped page.
What I did asked for is to stop using vm_page/VM_PAGE prefixes.

To be clear, I frown on conditional compilation in headers when it's not strictly necessary. In my experience conditional definition of struct members leads to fragility: debuggers might end up with an inconsistent view of the structure layout, it's easy to forget that structures might be used by userspace, etc.

I agree.

Minimize conditional compilation, and style fix to "char*"

Harbormaster completed remote builds in B32493: Diff 74809.Jul 22 2020, 5:34 PM

In general this is something I was planning on doing anyway (see my other comment). I disagree on calling it "unmapped" as it is poor name (and too bio-specific) for reasons I've given above. I think the sglist API shows we already use APIs with "vmpages" in the name outside of vm_page.{c,h} so that argument is kind of moot anyway.

sys/opencrypto/criov.c
68	Hmm, I would have preferred calling all this VMPAGES instead of UNMAPPED. UNMAPPED could also have been backed by an sglist(9), so it is ambiguous. I think VMPAGES is a better name if it is an array of vm_page_t. This is also consistent with the sglist(9) API which uses "vmpages" and not "unmapped". There are other places where knowing it's an array of VMPAGES is important (KTLS is one I was planning on implementing this exact feature for, as well as an earlier prototype I had a few years ago to teach /dev/crypto to wire user pages to avoid the overhead of copies when using ccr(4) from OpenSSL's engine interface for TLS).
sys/opencrypto/cryptodev.h
426–432	In general style(9) wants a blank line before comments (here and many other places throughout)

markj added inline comments.Jul 22 2020, 6:22 PM

sys/opencrypto/criov.c
68	My thinking was that we're not just using VM pages, but are additionally relying on the direct map to access their contents. A name that captures this would be ideal IMO. sglist just fetches their physical addresses, so it's not quite the same. UNMAPPED is admittedly not a good name. I'd prefer something more specific than VMPAGES but I don't have any good suggestions, so I'm ok with reverting that change back. Sorry for causing churn. I still think we should avoid adding anything to the vm_page_* namespace.

Use CRYPTO_BUF_VMPAGE instead of CRYPTO_BUF_UNMAPPED, and name static functions cvm_page_XXX

Harbormaster completed remote builds in B32495: Diff 74812.Jul 22 2020, 7:09 PM

I tested the patch with safexcel(4) on arm64, no problems seen when running GELI tests.

ping. Is there anything else I need to do here?

It looks fine for me with regards to interaction with unmapped/DMAP. But I do not know geli code to say more.

jhb added inline comments.Aug 12 2020, 9:01 PM

sys/opencrypto/criov.c
68	I agree not adding to the vm_page_* namespace, but this is a VMPAGES suffix. Note that for some use cases you won't even use the direct map (e.g when using ccr(4) with KTLS and the separate AAD, the actual TLS payload would be an unmapped mbuf which uses physaddrs and in the case it's file-backed the output buffer would be a vm_page_t array and the driver would just DMA from one to the other without ever using the direct map). Note that if we bothered to have an sglist buffer type it would have similar mapping constraints. I think we just have to describe it as a limitation in the documentation (crypto_buffer.9 in this case) that this type of buffer only works with crypto cursors and the crypto_copy* API (and thus with all device drivers) if the architecture supports a direct map.

Somehow my earlier comment was stuck. There are still some style nits about leading spaces before block comments (and before the new "skip" macro in criov.c). I think the general change looks good. I think it would be good to commit the new buffer type separately from the geli changes (so two commits). I will probably test this for KTLS in the near future.

Note that I do think there are some cases where even integrity would work fine as unmapped. ccr(4) (and Intel QAT) can both offload combined ETA including verifying or storing the hash via DMA. You might consider at least making it a sysctl/tunable as to whether geli can use unmapped requests for the integrity case.

In D25671#577993, @jhb wrote:

Somehow my earlier comment was stuck. There are still some style nits about leading spaces before block comments (and before the new "skip" macro in criov.c). I think the general change looks good. I think it would be good to commit the new buffer type separately from the geli changes (so two commits). I will probably test this for KTLS in the near future.

Are you saying that you want a blank line above every block comment?

Note that I do think there are some cases where even integrity would work fine as unmapped. ccr(4) (and Intel QAT) can both offload combined ETA including verifying or storing the hash via DMA. You might consider at least making it a sysctl/tunable as to whether geli can use unmapped requests for the integrity case.

QAT? I didn't know there was a driver for that yet.

Rebase

Update man pages

Use "vmpage" terminology consistently instead of "unmapped"

Herald added a reviewer: manpages. · View Herald TranscriptAug 12 2020, 11:09 PM

Harbormaster completed remote builds in B32962: Diff 75763.Aug 12 2020, 11:09 PM

sigsys_gmail.com added a subscriber: sigsys_gmail.com.Aug 13 2020, 12:18 AM

sigsys_gmail.com added inline comments.

sys/opencrypto/criov.c
300	Really not sure I understand this code in general, but should the whole amount left to process be subtracted on every iteration that processes a small chunk of it?

asomers added inline comments.Aug 14 2020, 2:04 AM

sys/opencrypto/criov.c
300	Good catch. You're right, but testing didn't catch it because geli never tries to advance by more than 4096 bytes at a time.

Fix crypto_cursor_advance when amount > 4096

Harbormaster completed remote builds in B32983: Diff 75809.Aug 14 2020, 2:04 AM

ping. Any further comments on this PR?

OK from manpages.

markj added inline comments.Aug 20 2020, 11:32 PM

sys/opencrypto/criov.c
211	This is still outstanding.
610	Does this compile on powerpc?

Fix build on powerpc and fix one style bug

Harbormaster completed remote builds in B33116: Diff 76103.Aug 23 2020, 2:20 PM

asomers marked 2 inline comments as done.Aug 23 2020, 2:20 PM

I agree that the GELI and opencrypto bits should be committed separately.

This revision is now accepted and ready to land.Aug 25 2020, 3:26 PM

Closed by commit rS364799: crypto(9): add CRYPTO_BUF_VMPAGE (authored by asomers). · Explain WhyAug 26 2020, 2:38 AM

This revision was automatically updated to reflect the committed changes.

asomers added a commit: rS364799: crypto(9): add CRYPTO_BUF_VMPAGE.

asomers added a commit: rS364800: geli: use unmapped I/O.Aug 26 2020, 2:45 AM

Revision Contents
Changeset List

Path

Size

sys/

crypto/

ccp/

ccp.c

8 lines

dev/

cxgbe/

crypto/

t4_crypto.c

8 lines

sec/

sec.c

6 lines

geom/

eli/

g_eli.c

12 lines

g_eli_privacy.c

67 lines

kern/

subr_bus_dma.c

9 lines

opencrypto/

219 lines

24 lines

44 lines

8 lines

Diff 74707

View Options

sys/crypto/ccp/ccp.c

	# Created by: anholt@FreeBSD.org			# Created by: anholt@FreeBSD.org
	# $FreeBSD$			# $FreeBSD$

	PORTNAME= paraview			PORTNAME= paraview
	PORTVERSION= 5.2.0			DISTVERSION= 5.2.0
	PORTREVISION= 2			PORTREVISION= 3
	CATEGORIES= science graphics			CATEGORIES= science graphics
	MASTER_SITES= http://www.paraview.org/files/v${VERMAJORMINOR}/			MASTER_SITES= http://www.paraview.org/files/v${VERMAJORMINOR}/
	DISTNAME= ParaView-v${PORTVERSION}			DISTNAME= ParaView-v${PORTVERSION}

	MAINTAINER= devel@stasyan.com			MAINTAINER= devel@stasyan.com
	COMMENT= Powerful scientific data visualization application			COMMENT= Powerful scientific data visualization application

	LICENSE= ParaView_License_1.2			LICENSE= ParaView_License_1.2
	LICENSE_NAME= ParaView_License			LICENSE_NAME= ParaView_License
	LICENSE_FILE= ${PATCH_WRKSRC}/License_v1.2.txt			LICENSE_FILE= ${PATCH_WRKSRC}/License_v1.2.txt
	LICENSE_PERMS= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept			LICENSE_PERMS= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept

	BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib			BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib@${PY_FLAVOR}
	LIB_DEPENDS= libhdf5.so:science/hdf5 \			LIB_DEPENDS= libhdf5.so:science/hdf5 \
	libpng.so:graphics/png \			libpng.so:graphics/png \
	libtiff.so:graphics/tiff \			libtiff.so:graphics/tiff \
	libfreetype.so:print/freetype2 \			libfreetype.so:print/freetype2 \
	libexpat.so:textproc/expat2 \			libexpat.so:textproc/expat2 \
	libjbig.so:graphics/jbigkit \			libjbig.so:graphics/jbigkit \
	liborc-0.4.so:devel/orc \			liborc-0.4.so:devel/orc \
	libpcre.so:devel/pcre \			libpcre.so:devel/pcre \
	libffi.so:devel/libffi \			libffi.so:devel/libffi \
	libdrm.so:graphics/libdrm \			libdrm.so:graphics/libdrm \
	libfontconfig.so:x11-fonts/fontconfig			libfontconfig.so:x11-fonts/fontconfig
	RUN_DEPENDS= bash:shells/bash \			RUN_DEPENDS= bash:shells/bash \
	${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib			${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib
				jrmUnsubmitted Not Done Inline Actions Should this have the flavor-foo for the python version? Should this be done now or should the focus be only on fixing the build issue? jrm: Should this have the flavor-foo for the python version? Should this be done now or should the…
				matUnsubmitted Not Done Inline Actions It must, yes. Add `@${PY_FLAVOR}`. mat: It must, yes. Add `@${PY_FLAVOR}`.

	CONFLICTS_BUILD= protobuf*			CONFLICTS_BUILD= protobuf*

				USES= alias desktop-file-utils cmake:outsource jpeg python:2.7 shebangfix
	USE_QT4= qmake_build moc_build rcc_build uic_build \			USE_QT4= qmake_build moc_build rcc_build uic_build \
	linguisttools_build assistant_run qt3support \			linguisttools_build assistant_run qt3support \
	corelib dbus designer gui help-tools network script \			corelib dbus designer gui help-tools network script \
	sql svg xml webkit assistantclient clucene \			sql svg xml webkit assistantclient clucene \
	xmlpatterns xmlpatterns-tool help			xmlpatterns xmlpatterns-tool help
	USE_GL= gl			USE_GL= gl glu
	USE_XORG= x11 xt xext ice xdmcp xau xcb xfixes xdamage xxf86vm xrender sm			USE_XORG= x11 xt xext ice xdmcp xau xcb xfixes xdamage xxf86vm xrender sm dri3proto
	USE_LDCONFIG= yes			USE_LDCONFIG= yes
	USE_GSTREAMER= yes			USE_GSTREAMER= yes
	USES= alias desktop-file-utils cmake:outsource jpeg python:2.7 shebangfix
	INSTALLS_ICONS= yes			INSTALLS_ICONS= yes

	CMAKE_ARGS+= -DBUILD_SHARED_LIBS="ON" \			CMAKE_ARGS+= -DBUILD_SHARED_LIBS="ON" \
	-DVTK_USE_SYSTEM_PNG="ON" \			-DVTK_USE_SYSTEM_PNG="ON" \
	-DVTK_USE_SYSTEM_JPEG="ON" \			-DVTK_USE_SYSTEM_JPEG="ON" \
	-DVTK_USE_SYSTEM_TIFF="ON" \			-DVTK_USE_SYSTEM_TIFF="ON" \
	-DVTK_USE_SYSTEM_ZLIB="ON" \			-DVTK_USE_SYSTEM_ZLIB="ON" \
	-DVTK_USE_SYSTEM_FREETYPE="ON" \			-DVTK_USE_SYSTEM_FREETYPE="ON" \
	Show All 24 Lines
	OSMESA_DESC= Use Mesa for off-screen rendering			OSMESA_DESC= Use Mesa for off-screen rendering
	GL2PS_DESC= Install support conversion OpenGL to PostScript			GL2PS_DESC= Install support conversion OpenGL to PostScript
	# VTKMPEG2 "Install patented MPEG2 encoder module" Off \			# VTKMPEG2 "Install patented MPEG2 encoder module" Off \

	VERMAJORMINOR= ${PORTVERSION:R}			VERMAJORMINOR= ${PORTVERSION:R}

	.include <bsd.port.options.mk>			.include <bsd.port.options.mk>

	.if ${PORT_OPTIONS:MOSMESA}			.if ${PORT_OPTIONS:MOSMESA}
	LIB_DEPENDS+= libOSMesa32.so:graphics/libosmesa			LIB_DEPENDS+= libOSMesa32.so:graphics/libosmesa
	CMAKE_ARGS+= -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \			CMAKE_ARGS+= -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \
	-DOSMESA_INCLUDE_DIR:PATH=${LOCALBASE}/include/Mesa \			-DOSMESA_INCLUDE_DIR:PATH=${LOCALBASE}/include/Mesa \
	-DOSMESA_LIBRARY:FILEPATH=${LOCALBASE}/lib/libOSMesa32.so			-DOSMESA_LIBRARY:FILEPATH=${LOCALBASE}/lib/libOSMesa32.so
	.endif			.endif

	.if ${PORT_OPTIONS:MGL2PS}			.if ${PORT_OPTIONS:MGL2PS}
	LIB_DEPENDS+= libgl2ps.so:print/gl2ps			LIB_DEPENDS+= libgl2ps.so:print/gl2ps
	CMAKE_ARGS+= -DVTK_USE_GL2PS:BOOL=ON			CMAKE_ARGS+= -DVTK_USE_GL2PS:BOOL=ON
	PLIST_SUB+= GL2PS=""			PLIST_SUB+= GL2PS=""
	.else			.else
	PLIST_SUB+= GL2PS="@comment "			PLIST_SUB+= GL2PS="@comment "
	.endif			.endif
				jrmUnsubmitted Not Done Inline Actions For future work, these could be converted to option helpers. jrm: For future work, these could be converted to option helpers.

	PLIST_SUB+= VERMAJORMINOR=${VERMAJORMINOR}			PLIST_SUB+= VERMAJORMINOR=${VERMAJORMINOR}
	CMAKE2INST= ParaViewConfig.cmake \			CMAKE2INST= ParaViewConfig.cmake \
	cmake_install.cmake			cmake_install.cmake
	LIB_INSTDIR= ${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}			LIB_INSTDIR= ${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}

	pre-configure:			pre-configure:
	${REINPLACE_CMD} -e 's\|png_set_gray_1_2_4_to_8\|png_set_expand_gray_1_2_4_to_8\|' \			@${REINPLACE_CMD} -e 's\|png_set_gray_1_2_4_to_8\|png_set_expand_gray_1_2_4_to_8\|' \
	${PATCH_WRKSRC}/VTK/IO/Image/vtkPNGReader.cxx			${PATCH_WRKSRC}/VTK/IO/Image/vtkPNGReader.cxx
	${REINPLACE_CMD} -e 's\|/bin/bash\|${LOCALBASE}/bin/bash\|' \			@${REINPLACE_CMD} -e 's\|/bin/bash\|${LOCALBASE}/bin/bash\|' \
	${PATCH_WRKSRC}/VTK/Utilities/Maintenance/vtk_site_history.py			${PATCH_WRKSRC}/VTK/Utilities/Maintenance/vtk_site_history.py

	post-install:			post-install:
	.for c2f in ${CMAKE2INST}			.for c2f in ${CMAKE2INST}
	${SED} -e 's\|${BUILD_WRKSRC}\|${LIB_INSTDIR}\|g' \			${SED} -e 's\|${BUILD_WRKSRC}\|${LIB_INSTDIR}\|g' \
	-e 's\|${PATCH_WRKSRC}\|${LIB_INSTDIR}\|g' \			-e 's\|${PATCH_WRKSRC}\|${LIB_INSTDIR}\|g' \
	${BUILD_WRKSRC}/${c2f} > ${STAGEDIR}${LIB_INSTDIR}/`${BASENAME} ${c2f}`			${BUILD_WRKSRC}/${c2f} > ${STAGEDIR}${LIB_INSTDIR}/`${BASENAME} ${c2f}`
	.endfor			.endfor
	${INSTALL_DATA} ${PATCH_WRKSRC}/CMake/UseParaView.cmake \			${INSTALL_DATA} ${PATCH_WRKSRC}/CMake/UseParaView.cmake \
	${STAGEDIR}${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}			${STAGEDIR}${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}

	.include <bsd.port.mk>			.include <bsd.port.mk>

View Options

sys/dev/cxgbe/crypto/t4_crypto.c

	# Created by: anholt@FreeBSD.org			# Created by: anholt@FreeBSD.org
	# $FreeBSD$			# $FreeBSD$

	PORTNAME= paraview			PORTNAME= paraview
	PORTVERSION= 5.2.0			DISTVERSION= 5.2.0
	PORTREVISION= 2			PORTREVISION= 3
	CATEGORIES= science graphics			CATEGORIES= science graphics
	MASTER_SITES= http://www.paraview.org/files/v${VERMAJORMINOR}/			MASTER_SITES= http://www.paraview.org/files/v${VERMAJORMINOR}/
	DISTNAME= ParaView-v${PORTVERSION}			DISTNAME= ParaView-v${PORTVERSION}

	MAINTAINER= devel@stasyan.com			MAINTAINER= devel@stasyan.com
	COMMENT= Powerful scientific data visualization application			COMMENT= Powerful scientific data visualization application

	LICENSE= ParaView_License_1.2			LICENSE= ParaView_License_1.2
	LICENSE_NAME= ParaView_License			LICENSE_NAME= ParaView_License
	LICENSE_FILE= ${PATCH_WRKSRC}/License_v1.2.txt			LICENSE_FILE= ${PATCH_WRKSRC}/License_v1.2.txt
	LICENSE_PERMS= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept			LICENSE_PERMS= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept

	BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib			BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib@${PY_FLAVOR}
	LIB_DEPENDS= libhdf5.so:science/hdf5 \			LIB_DEPENDS= libhdf5.so:science/hdf5 \
	libpng.so:graphics/png \			libpng.so:graphics/png \
	libtiff.so:graphics/tiff \			libtiff.so:graphics/tiff \
	libfreetype.so:print/freetype2 \			libfreetype.so:print/freetype2 \
	libexpat.so:textproc/expat2 \			libexpat.so:textproc/expat2 \
	libjbig.so:graphics/jbigkit \			libjbig.so:graphics/jbigkit \
	liborc-0.4.so:devel/orc \			liborc-0.4.so:devel/orc \
	libpcre.so:devel/pcre \			libpcre.so:devel/pcre \
	libffi.so:devel/libffi \			libffi.so:devel/libffi \
	libdrm.so:graphics/libdrm \			libdrm.so:graphics/libdrm \
	libfontconfig.so:x11-fonts/fontconfig			libfontconfig.so:x11-fonts/fontconfig
	RUN_DEPENDS= bash:shells/bash \			RUN_DEPENDS= bash:shells/bash \
	${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib			${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib
				jrmUnsubmitted Not Done Inline Actions Should this have the flavor-foo for the python version? Should this be done now or should the focus be only on fixing the build issue? jrm: Should this have the flavor-foo for the python version? Should this be done now or should the…
				matUnsubmitted Not Done Inline Actions It must, yes. Add `@${PY_FLAVOR}`. mat: It must, yes. Add `@${PY_FLAVOR}`.

	CONFLICTS_BUILD= protobuf*			CONFLICTS_BUILD= protobuf*

				USES= alias desktop-file-utils cmake:outsource jpeg python:2.7 shebangfix
	USE_QT4= qmake_build moc_build rcc_build uic_build \			USE_QT4= qmake_build moc_build rcc_build uic_build \
	linguisttools_build assistant_run qt3support \			linguisttools_build assistant_run qt3support \
	corelib dbus designer gui help-tools network script \			corelib dbus designer gui help-tools network script \
	sql svg xml webkit assistantclient clucene \			sql svg xml webkit assistantclient clucene \
	xmlpatterns xmlpatterns-tool help			xmlpatterns xmlpatterns-tool help
	USE_GL= gl			USE_GL= gl glu
	USE_XORG= x11 xt xext ice xdmcp xau xcb xfixes xdamage xxf86vm xrender sm			USE_XORG= x11 xt xext ice xdmcp xau xcb xfixes xdamage xxf86vm xrender sm dri3proto
	USE_LDCONFIG= yes			USE_LDCONFIG= yes
	USE_GSTREAMER= yes			USE_GSTREAMER= yes
	USES= alias desktop-file-utils cmake:outsource jpeg python:2.7 shebangfix
	INSTALLS_ICONS= yes			INSTALLS_ICONS= yes

	CMAKE_ARGS+= -DBUILD_SHARED_LIBS="ON" \			CMAKE_ARGS+= -DBUILD_SHARED_LIBS="ON" \
	-DVTK_USE_SYSTEM_PNG="ON" \			-DVTK_USE_SYSTEM_PNG="ON" \
	-DVTK_USE_SYSTEM_JPEG="ON" \			-DVTK_USE_SYSTEM_JPEG="ON" \
	-DVTK_USE_SYSTEM_TIFF="ON" \			-DVTK_USE_SYSTEM_TIFF="ON" \
	-DVTK_USE_SYSTEM_ZLIB="ON" \			-DVTK_USE_SYSTEM_ZLIB="ON" \
	-DVTK_USE_SYSTEM_FREETYPE="ON" \			-DVTK_USE_SYSTEM_FREETYPE="ON" \
	Show All 24 Lines
	OSMESA_DESC= Use Mesa for off-screen rendering			OSMESA_DESC= Use Mesa for off-screen rendering
	GL2PS_DESC= Install support conversion OpenGL to PostScript			GL2PS_DESC= Install support conversion OpenGL to PostScript
	# VTKMPEG2 "Install patented MPEG2 encoder module" Off \			# VTKMPEG2 "Install patented MPEG2 encoder module" Off \

	VERMAJORMINOR= ${PORTVERSION:R}			VERMAJORMINOR= ${PORTVERSION:R}

	.include <bsd.port.options.mk>			.include <bsd.port.options.mk>

	.if ${PORT_OPTIONS:MOSMESA}			.if ${PORT_OPTIONS:MOSMESA}
	LIB_DEPENDS+= libOSMesa32.so:graphics/libosmesa			LIB_DEPENDS+= libOSMesa32.so:graphics/libosmesa
	CMAKE_ARGS+= -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \			CMAKE_ARGS+= -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \
	-DOSMESA_INCLUDE_DIR:PATH=${LOCALBASE}/include/Mesa \			-DOSMESA_INCLUDE_DIR:PATH=${LOCALBASE}/include/Mesa \
	-DOSMESA_LIBRARY:FILEPATH=${LOCALBASE}/lib/libOSMesa32.so			-DOSMESA_LIBRARY:FILEPATH=${LOCALBASE}/lib/libOSMesa32.so
	.endif			.endif

	.if ${PORT_OPTIONS:MGL2PS}			.if ${PORT_OPTIONS:MGL2PS}
	LIB_DEPENDS+= libgl2ps.so:print/gl2ps			LIB_DEPENDS+= libgl2ps.so:print/gl2ps
	CMAKE_ARGS+= -DVTK_USE_GL2PS:BOOL=ON			CMAKE_ARGS+= -DVTK_USE_GL2PS:BOOL=ON
	PLIST_SUB+= GL2PS=""			PLIST_SUB+= GL2PS=""
	.else			.else
	PLIST_SUB+= GL2PS="@comment "			PLIST_SUB+= GL2PS="@comment "
	.endif			.endif
				jrmUnsubmitted Not Done Inline Actions For future work, these could be converted to option helpers. jrm: For future work, these could be converted to option helpers.

	PLIST_SUB+= VERMAJORMINOR=${VERMAJORMINOR}			PLIST_SUB+= VERMAJORMINOR=${VERMAJORMINOR}
	CMAKE2INST= ParaViewConfig.cmake \			CMAKE2INST= ParaViewConfig.cmake \
	cmake_install.cmake			cmake_install.cmake
	LIB_INSTDIR= ${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}			LIB_INSTDIR= ${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}

	pre-configure:			pre-configure:
	${REINPLACE_CMD} -e 's\|png_set_gray_1_2_4_to_8\|png_set_expand_gray_1_2_4_to_8\|' \			@${REINPLACE_CMD} -e 's\|png_set_gray_1_2_4_to_8\|png_set_expand_gray_1_2_4_to_8\|' \
	${PATCH_WRKSRC}/VTK/IO/Image/vtkPNGReader.cxx			${PATCH_WRKSRC}/VTK/IO/Image/vtkPNGReader.cxx
	${REINPLACE_CMD} -e 's\|/bin/bash\|${LOCALBASE}/bin/bash\|' \			@${REINPLACE_CMD} -e 's\|/bin/bash\|${LOCALBASE}/bin/bash\|' \
	${PATCH_WRKSRC}/VTK/Utilities/Maintenance/vtk_site_history.py			${PATCH_WRKSRC}/VTK/Utilities/Maintenance/vtk_site_history.py

	post-install:			post-install:
	.for c2f in ${CMAKE2INST}			.for c2f in ${CMAKE2INST}
	${SED} -e 's\|${BUILD_WRKSRC}\|${LIB_INSTDIR}\|g' \			${SED} -e 's\|${BUILD_WRKSRC}\|${LIB_INSTDIR}\|g' \
	-e 's\|${PATCH_WRKSRC}\|${LIB_INSTDIR}\|g' \			-e 's\|${PATCH_WRKSRC}\|${LIB_INSTDIR}\|g' \
	${BUILD_WRKSRC}/${c2f} > ${STAGEDIR}${LIB_INSTDIR}/`${BASENAME} ${c2f}`			${BUILD_WRKSRC}/${c2f} > ${STAGEDIR}${LIB_INSTDIR}/`${BASENAME} ${c2f}`
	.endfor			.endfor
	${INSTALL_DATA} ${PATCH_WRKSRC}/CMake/UseParaView.cmake \			${INSTALL_DATA} ${PATCH_WRKSRC}/CMake/UseParaView.cmake \
	${STAGEDIR}${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}			${STAGEDIR}${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}

	.include <bsd.port.mk>			.include <bsd.port.mk>

View Options

sys/dev/sec/sec.c

	# Created by: anholt@FreeBSD.org			# Created by: anholt@FreeBSD.org
	# $FreeBSD$			# $FreeBSD$

	PORTNAME= paraview			PORTNAME= paraview
	PORTVERSION= 5.2.0			DISTVERSION= 5.2.0
	PORTREVISION= 2			PORTREVISION= 3
	CATEGORIES= science graphics			CATEGORIES= science graphics
	MASTER_SITES= http://www.paraview.org/files/v${VERMAJORMINOR}/			MASTER_SITES= http://www.paraview.org/files/v${VERMAJORMINOR}/
	DISTNAME= ParaView-v${PORTVERSION}			DISTNAME= ParaView-v${PORTVERSION}

	MAINTAINER= devel@stasyan.com			MAINTAINER= devel@stasyan.com
	COMMENT= Powerful scientific data visualization application			COMMENT= Powerful scientific data visualization application

	LICENSE= ParaView_License_1.2			LICENSE= ParaView_License_1.2
	LICENSE_NAME= ParaView_License			LICENSE_NAME= ParaView_License
	LICENSE_FILE= ${PATCH_WRKSRC}/License_v1.2.txt			LICENSE_FILE= ${PATCH_WRKSRC}/License_v1.2.txt
	LICENSE_PERMS= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept			LICENSE_PERMS= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept

	BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib			BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib@${PY_FLAVOR}
	LIB_DEPENDS= libhdf5.so:science/hdf5 \			LIB_DEPENDS= libhdf5.so:science/hdf5 \
	libpng.so:graphics/png \			libpng.so:graphics/png \
	libtiff.so:graphics/tiff \			libtiff.so:graphics/tiff \
	libfreetype.so:print/freetype2 \			libfreetype.so:print/freetype2 \
	libexpat.so:textproc/expat2 \			libexpat.so:textproc/expat2 \
	libjbig.so:graphics/jbigkit \			libjbig.so:graphics/jbigkit \
	liborc-0.4.so:devel/orc \			liborc-0.4.so:devel/orc \
	libpcre.so:devel/pcre \			libpcre.so:devel/pcre \
	libffi.so:devel/libffi \			libffi.so:devel/libffi \
	libdrm.so:graphics/libdrm \			libdrm.so:graphics/libdrm \
	libfontconfig.so:x11-fonts/fontconfig			libfontconfig.so:x11-fonts/fontconfig
	RUN_DEPENDS= bash:shells/bash \			RUN_DEPENDS= bash:shells/bash \
	${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib			${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib
				jrmUnsubmitted Not Done Inline Actions Should this have the flavor-foo for the python version? Should this be done now or should the focus be only on fixing the build issue? jrm: Should this have the flavor-foo for the python version? Should this be done now or should the…
				matUnsubmitted Not Done Inline Actions It must, yes. Add `@${PY_FLAVOR}`. mat: It must, yes. Add `@${PY_FLAVOR}`.

	CONFLICTS_BUILD= protobuf*			CONFLICTS_BUILD= protobuf*

				USES= alias desktop-file-utils cmake:outsource jpeg python:2.7 shebangfix
	USE_QT4= qmake_build moc_build rcc_build uic_build \			USE_QT4= qmake_build moc_build rcc_build uic_build \
	linguisttools_build assistant_run qt3support \			linguisttools_build assistant_run qt3support \
	corelib dbus designer gui help-tools network script \			corelib dbus designer gui help-tools network script \
	sql svg xml webkit assistantclient clucene \			sql svg xml webkit assistantclient clucene \
	xmlpatterns xmlpatterns-tool help			xmlpatterns xmlpatterns-tool help
	USE_GL= gl			USE_GL= gl glu
	USE_XORG= x11 xt xext ice xdmcp xau xcb xfixes xdamage xxf86vm xrender sm			USE_XORG= x11 xt xext ice xdmcp xau xcb xfixes xdamage xxf86vm xrender sm dri3proto
	USE_LDCONFIG= yes			USE_LDCONFIG= yes
	USE_GSTREAMER= yes			USE_GSTREAMER= yes
	USES= alias desktop-file-utils cmake:outsource jpeg python:2.7 shebangfix
	INSTALLS_ICONS= yes			INSTALLS_ICONS= yes

	CMAKE_ARGS+= -DBUILD_SHARED_LIBS="ON" \			CMAKE_ARGS+= -DBUILD_SHARED_LIBS="ON" \
	-DVTK_USE_SYSTEM_PNG="ON" \			-DVTK_USE_SYSTEM_PNG="ON" \
	-DVTK_USE_SYSTEM_JPEG="ON" \			-DVTK_USE_SYSTEM_JPEG="ON" \
	-DVTK_USE_SYSTEM_TIFF="ON" \			-DVTK_USE_SYSTEM_TIFF="ON" \
	-DVTK_USE_SYSTEM_ZLIB="ON" \			-DVTK_USE_SYSTEM_ZLIB="ON" \
	-DVTK_USE_SYSTEM_FREETYPE="ON" \			-DVTK_USE_SYSTEM_FREETYPE="ON" \
	Show All 24 Lines
	OSMESA_DESC= Use Mesa for off-screen rendering			OSMESA_DESC= Use Mesa for off-screen rendering
	GL2PS_DESC= Install support conversion OpenGL to PostScript			GL2PS_DESC= Install support conversion OpenGL to PostScript
	# VTKMPEG2 "Install patented MPEG2 encoder module" Off \			# VTKMPEG2 "Install patented MPEG2 encoder module" Off \

	VERMAJORMINOR= ${PORTVERSION:R}			VERMAJORMINOR= ${PORTVERSION:R}

	.include <bsd.port.options.mk>			.include <bsd.port.options.mk>

	.if ${PORT_OPTIONS:MOSMESA}			.if ${PORT_OPTIONS:MOSMESA}
	LIB_DEPENDS+= libOSMesa32.so:graphics/libosmesa			LIB_DEPENDS+= libOSMesa32.so:graphics/libosmesa
	CMAKE_ARGS+= -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \			CMAKE_ARGS+= -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \
	-DOSMESA_INCLUDE_DIR:PATH=${LOCALBASE}/include/Mesa \			-DOSMESA_INCLUDE_DIR:PATH=${LOCALBASE}/include/Mesa \
	-DOSMESA_LIBRARY:FILEPATH=${LOCALBASE}/lib/libOSMesa32.so			-DOSMESA_LIBRARY:FILEPATH=${LOCALBASE}/lib/libOSMesa32.so
	.endif			.endif

	.if ${PORT_OPTIONS:MGL2PS}			.if ${PORT_OPTIONS:MGL2PS}
	LIB_DEPENDS+= libgl2ps.so:print/gl2ps			LIB_DEPENDS+= libgl2ps.so:print/gl2ps
	CMAKE_ARGS+= -DVTK_USE_GL2PS:BOOL=ON			CMAKE_ARGS+= -DVTK_USE_GL2PS:BOOL=ON
	PLIST_SUB+= GL2PS=""			PLIST_SUB+= GL2PS=""
	.else			.else
	PLIST_SUB+= GL2PS="@comment "			PLIST_SUB+= GL2PS="@comment "
	.endif			.endif
				jrmUnsubmitted Not Done Inline Actions For future work, these could be converted to option helpers. jrm: For future work, these could be converted to option helpers.

	PLIST_SUB+= VERMAJORMINOR=${VERMAJORMINOR}			PLIST_SUB+= VERMAJORMINOR=${VERMAJORMINOR}
	CMAKE2INST= ParaViewConfig.cmake \			CMAKE2INST= ParaViewConfig.cmake \
	cmake_install.cmake			cmake_install.cmake
	LIB_INSTDIR= ${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}			LIB_INSTDIR= ${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}

	pre-configure:			pre-configure:
	${REINPLACE_CMD} -e 's\|png_set_gray_1_2_4_to_8\|png_set_expand_gray_1_2_4_to_8\|' \			@${REINPLACE_CMD} -e 's\|png_set_gray_1_2_4_to_8\|png_set_expand_gray_1_2_4_to_8\|' \
	${PATCH_WRKSRC}/VTK/IO/Image/vtkPNGReader.cxx			${PATCH_WRKSRC}/VTK/IO/Image/vtkPNGReader.cxx
	${REINPLACE_CMD} -e 's\|/bin/bash\|${LOCALBASE}/bin/bash\|' \			@${REINPLACE_CMD} -e 's\|/bin/bash\|${LOCALBASE}/bin/bash\|' \
	${PATCH_WRKSRC}/VTK/Utilities/Maintenance/vtk_site_history.py			${PATCH_WRKSRC}/VTK/Utilities/Maintenance/vtk_site_history.py

	post-install:			post-install:
	.for c2f in ${CMAKE2INST}			.for c2f in ${CMAKE2INST}
	${SED} -e 's\|${BUILD_WRKSRC}\|${LIB_INSTDIR}\|g' \			${SED} -e 's\|${BUILD_WRKSRC}\|${LIB_INSTDIR}\|g' \
	-e 's\|${PATCH_WRKSRC}\|${LIB_INSTDIR}\|g' \			-e 's\|${PATCH_WRKSRC}\|${LIB_INSTDIR}\|g' \
	${BUILD_WRKSRC}/${c2f} > ${STAGEDIR}${LIB_INSTDIR}/`${BASENAME} ${c2f}`			${BUILD_WRKSRC}/${c2f} > ${STAGEDIR}${LIB_INSTDIR}/`${BASENAME} ${c2f}`
	.endfor			.endfor
	${INSTALL_DATA} ${PATCH_WRKSRC}/CMake/UseParaView.cmake \			${INSTALL_DATA} ${PATCH_WRKSRC}/CMake/UseParaView.cmake \
	${STAGEDIR}${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}			${STAGEDIR}${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}

	.include <bsd.port.mk>			.include <bsd.port.mk>

View Options

sys/geom/eli/g_eli.c

	# Created by: anholt@FreeBSD.org			# Created by: anholt@FreeBSD.org
	# $FreeBSD$			# $FreeBSD$

	PORTNAME= paraview			PORTNAME= paraview
	PORTVERSION= 5.2.0			DISTVERSION= 5.2.0
	PORTREVISION= 2			PORTREVISION= 3
	CATEGORIES= science graphics			CATEGORIES= science graphics
	MASTER_SITES= http://www.paraview.org/files/v${VERMAJORMINOR}/			MASTER_SITES= http://www.paraview.org/files/v${VERMAJORMINOR}/
	DISTNAME= ParaView-v${PORTVERSION}			DISTNAME= ParaView-v${PORTVERSION}

	MAINTAINER= devel@stasyan.com			MAINTAINER= devel@stasyan.com
	COMMENT= Powerful scientific data visualization application			COMMENT= Powerful scientific data visualization application

	LICENSE= ParaView_License_1.2			LICENSE= ParaView_License_1.2
	LICENSE_NAME= ParaView_License			LICENSE_NAME= ParaView_License
	LICENSE_FILE= ${PATCH_WRKSRC}/License_v1.2.txt			LICENSE_FILE= ${PATCH_WRKSRC}/License_v1.2.txt
	LICENSE_PERMS= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept			LICENSE_PERMS= dist-mirror dist-sell pkg-mirror pkg-sell auto-accept

	BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib			BUILD_DEPENDS= ${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib@${PY_FLAVOR}
	LIB_DEPENDS= libhdf5.so:science/hdf5 \			LIB_DEPENDS= libhdf5.so:science/hdf5 \
	libpng.so:graphics/png \			libpng.so:graphics/png \
	libtiff.so:graphics/tiff \			libtiff.so:graphics/tiff \
	libfreetype.so:print/freetype2 \			libfreetype.so:print/freetype2 \
	libexpat.so:textproc/expat2 \			libexpat.so:textproc/expat2 \
	libjbig.so:graphics/jbigkit \			libjbig.so:graphics/jbigkit \
	liborc-0.4.so:devel/orc \			liborc-0.4.so:devel/orc \
	libpcre.so:devel/pcre \			libpcre.so:devel/pcre \
	libffi.so:devel/libffi \			libffi.so:devel/libffi \
	libdrm.so:graphics/libdrm \			libdrm.so:graphics/libdrm \
	libfontconfig.so:x11-fonts/fontconfig			libfontconfig.so:x11-fonts/fontconfig
	RUN_DEPENDS= bash:shells/bash \			RUN_DEPENDS= bash:shells/bash \
	${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib			${PYTHON_SITELIBDIR}/matplotlib/pyplot.py:math/py-matplotlib
				jrmUnsubmitted Not Done Inline Actions Should this have the flavor-foo for the python version? Should this be done now or should the focus be only on fixing the build issue? jrm: Should this have the flavor-foo for the python version? Should this be done now or should the…
				matUnsubmitted Not Done Inline Actions It must, yes. Add `@${PY_FLAVOR}`. mat: It must, yes. Add `@${PY_FLAVOR}`.

	CONFLICTS_BUILD= protobuf*			CONFLICTS_BUILD= protobuf*

				USES= alias desktop-file-utils cmake:outsource jpeg python:2.7 shebangfix
	USE_QT4= qmake_build moc_build rcc_build uic_build \			USE_QT4= qmake_build moc_build rcc_build uic_build \
	linguisttools_build assistant_run qt3support \			linguisttools_build assistant_run qt3support \
	corelib dbus designer gui help-tools network script \			corelib dbus designer gui help-tools network script \
	sql svg xml webkit assistantclient clucene \			sql svg xml webkit assistantclient clucene \
	xmlpatterns xmlpatterns-tool help			xmlpatterns xmlpatterns-tool help
	USE_GL= gl			USE_GL= gl glu
	USE_XORG= x11 xt xext ice xdmcp xau xcb xfixes xdamage xxf86vm xrender sm			USE_XORG= x11 xt xext ice xdmcp xau xcb xfixes xdamage xxf86vm xrender sm dri3proto
	USE_LDCONFIG= yes			USE_LDCONFIG= yes
	USE_GSTREAMER= yes			USE_GSTREAMER= yes
	USES= alias desktop-file-utils cmake:outsource jpeg python:2.7 shebangfix
	INSTALLS_ICONS= yes			INSTALLS_ICONS= yes

	CMAKE_ARGS+= -DBUILD_SHARED_LIBS="ON" \			CMAKE_ARGS+= -DBUILD_SHARED_LIBS="ON" \
	-DVTK_USE_SYSTEM_PNG="ON" \			-DVTK_USE_SYSTEM_PNG="ON" \
	-DVTK_USE_SYSTEM_JPEG="ON" \			-DVTK_USE_SYSTEM_JPEG="ON" \
	-DVTK_USE_SYSTEM_TIFF="ON" \			-DVTK_USE_SYSTEM_TIFF="ON" \
	-DVTK_USE_SYSTEM_ZLIB="ON" \			-DVTK_USE_SYSTEM_ZLIB="ON" \
	-DVTK_USE_SYSTEM_FREETYPE="ON" \			-DVTK_USE_SYSTEM_FREETYPE="ON" \
	Show All 24 Lines
	OSMESA_DESC= Use Mesa for off-screen rendering			OSMESA_DESC= Use Mesa for off-screen rendering
	GL2PS_DESC= Install support conversion OpenGL to PostScript			GL2PS_DESC= Install support conversion OpenGL to PostScript
	# VTKMPEG2 "Install patented MPEG2 encoder module" Off \			# VTKMPEG2 "Install patented MPEG2 encoder module" Off \

	VERMAJORMINOR= ${PORTVERSION:R}			VERMAJORMINOR= ${PORTVERSION:R}

	.include <bsd.port.options.mk>			.include <bsd.port.options.mk>

	.if ${PORT_OPTIONS:MOSMESA}			.if ${PORT_OPTIONS:MOSMESA}
	LIB_DEPENDS+= libOSMesa32.so:graphics/libosmesa			LIB_DEPENDS+= libOSMesa32.so:graphics/libosmesa
	CMAKE_ARGS+= -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \			CMAKE_ARGS+= -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \
	-DOSMESA_INCLUDE_DIR:PATH=${LOCALBASE}/include/Mesa \			-DOSMESA_INCLUDE_DIR:PATH=${LOCALBASE}/include/Mesa \
	-DOSMESA_LIBRARY:FILEPATH=${LOCALBASE}/lib/libOSMesa32.so			-DOSMESA_LIBRARY:FILEPATH=${LOCALBASE}/lib/libOSMesa32.so
	.endif			.endif

	.if ${PORT_OPTIONS:MGL2PS}			.if ${PORT_OPTIONS:MGL2PS}
	LIB_DEPENDS+= libgl2ps.so:print/gl2ps			LIB_DEPENDS+= libgl2ps.so:print/gl2ps
	CMAKE_ARGS+= -DVTK_USE_GL2PS:BOOL=ON			CMAKE_ARGS+= -DVTK_USE_GL2PS:BOOL=ON
	PLIST_SUB+= GL2PS=""			PLIST_SUB+= GL2PS=""
	.else			.else
	PLIST_SUB+= GL2PS="@comment "			PLIST_SUB+= GL2PS="@comment "
	.endif			.endif
				jrmUnsubmitted Not Done Inline Actions For future work, these could be converted to option helpers. jrm: For future work, these could be converted to option helpers.

	PLIST_SUB+= VERMAJORMINOR=${VERMAJORMINOR}			PLIST_SUB+= VERMAJORMINOR=${VERMAJORMINOR}
	CMAKE2INST= ParaViewConfig.cmake \			CMAKE2INST= ParaViewConfig.cmake \
	cmake_install.cmake			cmake_install.cmake
	LIB_INSTDIR= ${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}			LIB_INSTDIR= ${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}

	pre-configure:			pre-configure:
	${REINPLACE_CMD} -e 's\|png_set_gray_1_2_4_to_8\|png_set_expand_gray_1_2_4_to_8\|' \			@${REINPLACE_CMD} -e 's\|png_set_gray_1_2_4_to_8\|png_set_expand_gray_1_2_4_to_8\|' \
	${PATCH_WRKSRC}/VTK/IO/Image/vtkPNGReader.cxx			${PATCH_WRKSRC}/VTK/IO/Image/vtkPNGReader.cxx
	${REINPLACE_CMD} -e 's\|/bin/bash\|${LOCALBASE}/bin/bash\|' \			@${REINPLACE_CMD} -e 's\|/bin/bash\|${LOCALBASE}/bin/bash\|' \
	${PATCH_WRKSRC}/VTK/Utilities/Maintenance/vtk_site_history.py			${PATCH_WRKSRC}/VTK/Utilities/Maintenance/vtk_site_history.py

	post-install:			post-install:
	.for c2f in ${CMAKE2INST}			.for c2f in ${CMAKE2INST}
	${SED} -e 's\|${BUILD_WRKSRC}\|${LIB_INSTDIR}\|g' \			${SED} -e 's\|${BUILD_WRKSRC}\|${LIB_INSTDIR}\|g' \
	-e 's\|${PATCH_WRKSRC}\|${LIB_INSTDIR}\|g' \			-e 's\|${PATCH_WRKSRC}\|${LIB_INSTDIR}\|g' \
	${BUILD_WRKSRC}/${c2f} > ${STAGEDIR}${LIB_INSTDIR}/`${BASENAME} ${c2f}`			${BUILD_WRKSRC}/${c2f} > ${STAGEDIR}${LIB_INSTDIR}/`${BASENAME} ${c2f}`
	.endfor			.endfor
	${INSTALL_DATA} ${PATCH_WRKSRC}/CMake/UseParaView.cmake \			${INSTALL_DATA} ${PATCH_WRKSRC}/CMake/UseParaView.cmake \
	${STAGEDIR}${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}			${STAGEDIR}${PREFIX}/lib/${PORTNAME}-${VERMAJORMINOR}

	.include <bsd.port.mk>			.include <bsd.port.mk>