Show All 21 Lines
.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)		.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

Qt_Include_MAINTAINER= kde@FreeBSD.org		Qt_Include_MAINTAINER= kde@FreeBSD.org
Qt_Pre_Include= bsd.qt.mk		Qt_Pre_Include= bsd.qt.mk

# Qt versions currently supported by the framework.		# Qt versions currently supported by the framework.
_QT_SUPPORTED?= 4 5		_QT_SUPPORTED?= 4 5
QT4_VERSION?= 4.8.7		QT4_VERSION?= 4.8.7
QT5_VERSION?= 5.6.2		QT5_VERSION?= 5.7.1

_QT_RELNAME= qt${_QT_VERSION:R:R}		_QT_RELNAME= qt${_QT_VERSION:R:R}
_QT_VERSION= # empty		_QT_VERSION= # empty
.for ver in ${_QT_SUPPORTED}		.for ver in ${_QT_SUPPORTED}
. if defined(USE_QT${ver})		. if defined(USE_QT${ver})
. if empty(_QT_VERSION)		. if empty(_QT_VERSION)
_QT_VERSION= ${QT${ver}_VERSION}		_QT_VERSION= ${QT${ver}_VERSION}
. else		. else
# Reject different USE_QT*.		# Reject different USE_QT*.
IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'		IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
. endif		. endif
. endif		. endif
.endfor		.endfor

.if empty(_QT_VERSION)		.if empty(_QT_VERSION)
# The file was included without USE_QT*.		# The file was included without USE_QT*.
IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'		IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
.endif		.endif

.if defined(QT_DIST)		.if defined(QT_DIST)
QT_NONSTANDARD= yes		QT_NONSTANDARD= yes

MASTER_SITES= ${MASTER_SITE_QT}		MASTER_SITES= ${MASTER_SITE_QT}
# Useless, as it must be defined before including bsd.port.pre.mk (at least
# because of bsd.options.mk).
#PKGNAMEPREFIX?= ${_QT_RELNAME}-
DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo		DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo

LICENSE?= LGPL21		LICENSE?= LGPL21

. if !exists(${PKGDIR}/pkg-descr)		. if !exists(${PKGDIR}/pkg-descr)
DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr		DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr
. endif		. endif

Show All 21 Lines
# better not to fix what is not explicitly broken there.		# better not to fix what is not explicitly broken there.
LDFLAGS+= -Wl,--as-needed		LDFLAGS+= -Wl,--as-needed

. if ${.TARGETS:Mmakesum} \|\| ${.TARGETS:Mfetch} && \		. if ${.TARGETS:Mmakesum} \|\| ${.TARGETS:Mfetch} && \
defined(DISABLE_SIZE) && defined(NO_CHECKSUM)		defined(DISABLE_SIZE) && defined(NO_CHECKSUM)
# Ensure that the "makesum" target (with its inner "fetch" one) uses		# Ensure that the "makesum" target (with its inner "fetch" one) uses
# devel/qt*/distinfo for every port.		# devel/qt*/distinfo for every port.
. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}		. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}
QT_DIST= 3d base canvas3d connectivity declarative graphicaleffects imageformats \		QT_DIST= 3d base canvas3d charts connectivity datavis3d declarative \
location multimedia quickcontrols quickcontrols2 script sensors serialbus serialport svg tools \		declarative-render2d gamepad graphicaleffects imageformats \
translations webchannel websockets x11extras xmlpatterns		location multimedia quickcontrols quickcontrols2 script scxml \
		sensors serialbus serialport svg tools translations \
		virtualkeyboard webchannel webkit websockets x11extras \
		xmlpatterns
. endif		. endif
		matUnsubmitted Done Inline Actions i think there is a level of indentation missing here in all but the first line. mat: i think there is a level of indentation missing here in all but the first line.
		matUnsubmitted Not Done Inline Actions These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4. mat: These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4.
. endif		. endif

. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"		. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies.		# Qt configure requires pkg-config to detect dependencies.
USES+= pkgconfig		USES+= pkgconfig

# Set QMAKESPEC when building qtbase so that qmake (called by the configure		# Set QMAKESPEC when building qtbase so that qmake (called by the configure
# script) can find the mkspecs we create ourselves in devel/qmake5.		# script) can find the mkspecs we create ourselves in devel/qmake5.
Show All 36 Lines	CONFIGURE_ARGS+=-nomake examples -nomake tests \
-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \		-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \		-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
-qmldir ${PREFIX}/${QT_QMLDIR_REL} \		-qmldir ${PREFIX}/${QT_QMLDIR_REL} \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \		-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
-testsdir ${PREFIX}/${QT_TESTDIR_REL}		-testsdir ${PREFIX}/${QT_TESTDIR_REL}
. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)		. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)
CONFIGURE_ARGS+=-no-sse2		CONFIGURE_ARGS+=-no-sse2
. endif		. endif

. endif		. endif
		rakucoUnsubmitted Done Inline Actions Can you add a bigger description of why we do this? rakuco: Can you add a bigger description of why we do this?

. if defined(WANT_QT_DEBUG) \|\| defined(WITH_DEBUG)		. if defined(WANT_QT_DEBUG) \|\| defined(WITH_DEBUG)
WITH_DEBUG= yes		WITH_DEBUG= yes
STRIP= # It's done prior to bsd.qt.mk inclusion.		STRIP= # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+=-debug -separate-debug-info		CONFIGURE_ARGS+=-debug -separate-debug-info
# Override configuration in global qconfig.pri.		# Override configuration in global qconfig.pri.
QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \		QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \
QT_CONFIG-="release"		QT_CONFIG-="release"
Show All 9 Lines
CONFIGURE_ARGS+=-verbose		CONFIGURE_ARGS+=-verbose
. endif		. endif

. if ${QT_DIST} == "base" \|\| ${_QT_VERSION:M4*}		. if ${QT_DIST} == "base" \|\| ${_QT_VERSION:M4*}
. if ${_QT_VERSION:M4*}		. if ${_QT_VERSION:M4*}
_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \		_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool
. else		. else
_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src_corelib_global_qcompilerdetection.h \		_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf
. endif		. endif
EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \		EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \
${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}		${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}
. endif		. endif

# Override settings installed in qconfig.h and *.pri files. The flags will be		# Override settings installed in qconfig.h and *.pri files. The flags will be
Show All 15 Lines
. endif		. endif
. if ${QT_CONFIG:N-*}		. if ${QT_CONFIG:N-*}
QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"		QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif		. endif
. if ${QT_CONFIG:M-*}		. if ${QT_CONFIG:M-*}
QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"		QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif		. endif

		# Add a RUN_DEPENDS on misc/qtchooser to select the binaries.
		# The binaries of both supported Qt versions are installed to
		# ${LOCALBASE}/lib/qt[45]/bin. The port misc/qtchooser installs
		# wrapper binaries into ${LOCALBASE}/bin, and chooses the correct
		# one depending on the value of QT_SELECT (which we pass to both
		# CONFIGURE_ENV and MAKE_ENV). Therefore make all QT_DIST ports
		# RUN_DEPEND on it.
		RUN_DEPENDS+= qtchooser:misc/qtchooser

PLIST_SUB+= SHORTVER=${DISTVERSION:R} \		PLIST_SUB+= SHORTVER=${DISTVERSION:R} \
FULLVER=${DISTVERSION:C/-.*//}		FULLVER=${DISTVERSION:C/-.*//}
.endif # defined(QT_DIST)		.endif # defined(QT_DIST)

.if ${_QT_VERSION:M4*}
QT_BINDIR_REL?= bin
QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_PLUGINDIR_REL?= ${QT_LIBDIR_REL}/plugins
QT_IMPORTDIR_REL?= ${QT_LIBDIR_REL}/imports
.endif

# A wrapper (qtchooser) is used to invoke binaries.		# A wrapper (qtchooser) is used to invoke binaries.
QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin		QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin
QT_INCDIR_REL?= include/${_QT_RELNAME}		QT_INCDIR_REL?= include/${_QT_RELNAME}
QT_LIBDIR_REL?= lib		QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_ARCHDIR_REL?=${QT_LIBDIR_REL}/${_QT_RELNAME}		QT_ARCHDIR_REL?=${QT_LIBDIR_REL}
QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins		QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins
QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}		QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}
QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports		QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports
QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml		QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml
QT_DATADIR_REL?=share/${_QT_RELNAME}		QT_DATADIR_REL?=share/${_QT_RELNAME}
QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}		QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}
QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations		QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations
QT_ETCDIR_REL?= etc/xdg		QT_ETCDIR_REL?= etc/xdg
QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}		QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}
QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests		QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests
		QT_CMAKEDIR_REL?= lib/cmake
		QT_QTCHOOSERDIR_REL?= ${QT_ETCDIR_REL}/qtchooser

# Not customizable.		# Not customizable.
.if ${_QT_VERSION:M4*}		.if ${_QT_VERSION:M4*}
QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs		QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs

_QT_LIBVER= # empty		_QT_LIBVER= # empty
_QT_BINSUFX= -${_QT_RELNAME}
.else		.else
QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs		QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs

_QT_LIBVER= ${_QT_VERSION:R:R}		_QT_LIBVER= ${_QT_VERSION:R:R}
_QT_BINSUFX= # empty
.endif		.endif

LRELEASE?= ${QT_BINDIR}/lrelease${_QT_BINSUFX}		LRELEASE?= ${QT_BINDIR}/lrelease
LUPDATE?= ${QT_BINDIR}/lupdate${_QT_BINSUFX}		LUPDATE?= ${QT_BINDIR}/lupdate
MOC?= ${QT_BINDIR}/moc${_QT_BINSUFX}		MOC?= ${QT_BINDIR}/moc
RCC?= ${QT_BINDIR}/rcc		RCC?= ${QT_BINDIR}/rcc
UIC?= ${QT_BINDIR}/uic${_QT_BINSUFX}		UIC?= ${QT_BINDIR}/uic
QMAKE?= ${QT_BINDIR}/qmake${_QT_BINSUFX}		QMAKE?= ${QT_BINDIR}/qmake
# Needed to redefine the qmake target for internal Qt configuration.		# Needed to redefine the qmake target for internal Qt configuration.
		matUnsubmitted Not Done Inline Actions If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not QT_BINDIR. (If they are the ones in PREFIX/some-qt-directory then it's ok.) mat: If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not…
		tcbernerAuthorUnsubmitted Not Done Inline Actions These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` . tcberner: These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` .
_QMAKE?= ${QMAKE}		_QMAKE?= ${QMAKE}
QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}		QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}

# The whole Qt distribution should be built with the same compiler, but it's		# The whole Qt distribution should be built with the same compiler, but it's
# better to support custom settings. Dereferencing the detection allows to		# better to support custom settings. Dereferencing the detection allows to
# avoid forking a shell on each inclusion of this file, and to catch any CXX		# avoid forking a shell on each inclusion of this file, and to catch any CXX
# customization (via USE_GCC, etc.).		# customization (via USE_GCC, etc.).
QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in clang) echo clang ;; *) echo g++ ;; esac)		QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in clang) echo clang ;; *) echo g++ ;; esac)

# Import QMAKE_ENV and QMAKE_ARGS definitions.		# Import QMAKE_ENV and QMAKE_ARGS definitions.
USES+= qmake:_env		USES+= qmake:_env

.for dir in INC ARCH PLUGIN LIBEXEC IMPORT \		.for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \
QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC		QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC \
		CMAKE QTCHOOSER
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}		QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
		# Export all directories to the plist substituion for QT_DIST ports.
		rakucoUnsubmitted Done Inline Actions Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space before "QT_DIST". Additionally, the comment is basically describing what we can see below, it'd be more helpful if it explained why instead. rakuco: Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space…
		# For the others, exclude QT_CMAKEDIR and QT_ETCDIR.
		. if (${dir:NCMAKE} && ${dir:NETC}) \|\| defined(QT_DIST)
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"		PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
.endfor

.for dir in BIN LIB
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
. if defined(QT_DIST)
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
. endif		. endif
.endfor		.endfor

		# Pass the chosen Qt version to the environment for qtchooser
		rakucoUnsubmitted Done Inline Actions Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences with a period. rakuco: Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences…
		CONFIGURE_ENV+= QT_SELECT=${_QT_RELNAME}
		MAKE_ENV+= QT_SELECT=${_QT_RELNAME}

.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)		.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)		.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)

Qt_Post_Include= bsd.qt.mk		Qt_Post_Include= bsd.qt.mk

.if !defined(QT_NONSTANDARD)		.if !defined(QT_NONSTANDARD)
CONFIGURE_ENV+= QTDIR="${PREFIX}" QMAKE="${QMAKE}" \		CONFIGURE_ENV+= QTDIR="${QT_ARCHDIR}" QMAKE="${QMAKE}" \
MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \		MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \
QMAKESPEC="${QMAKESPEC}"		QMAKESPEC="${QMAKESPEC}"
CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \		CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \
--with-qt-libraries=${QT_LIBDIR} \		--with-qt-libraries=${QT_LIBDIR} \
--with-extra-includes=${LOCALBASE}/include \		--with-extra-includes=${LOCALBASE}/include \
--with-extra-libs=${LOCALBASE}/lib		--with-extra-libs=${LOCALBASE}/lib
.endif # !defined(QT_NONSTANDARD)		.endif # !defined(QT_NONSTANDARD)

_USE_QT_ALL= assistant dbus declarative designer doc gui help \		_USE_QT_ALL= assistant dbus declarative designer doc gui help \
imageformats l10n linguist linguisttools multimedia \		imageformats l10n linguist linguisttools multimedia \
network opengl pixeltool qdbusviewer qmake script \		network opengl pixeltool qdbusviewer qmake script \
scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \		scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \
sql-sqlite2 sql-sqlite3 svg testlib webkit \		sql-sqlite2 sql-sqlite3 svg testlib webkit \
xml xmlpatterns		xml xmlpatterns

_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \		_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \
codecs-kr codecs-tw corelib demo graphicssystems-opengl \		codecs-kr codecs-tw corelib demo graphicssystems-opengl \
help-tools iconengines inputmethods makeqpf moc phonon \		help-tools iconengines inputmethods makeqpf moc phonon \
phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \		phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \
qtestlib qvfb rcc uic uic3 xmlpatterns-tool		qtestlib qvfb rcc uic uic3 xmlpatterns-tool

_USE_QT5_ONLY= 3d buildtools canvas3d concurrent connectivity core \		_USE_QT5_ONLY= 3d buildtools canvas3d charts concurrent connectivity \
examples graphicaleffects location paths phonon4 \		core datavis3d declarative-render2d examples gamepad \
printsupport qdbus qdoc qdoc-data qev qml quick quickcontrols \		graphicaleffects location paths phonon4 printsupport \
quickcontrols2 sensors serialbus serialport sql-tds \		qdbus qdoc qdoc-data qev qml quick quickcontrols \
uiplugin uitools webchannel websockets widgets x11extras		quickcontrols2 scxml sensors serialbus serialport \
		sql-tds uiplugin uitools virtualkeyboard webchannel \
		websockets widgets x11extras

3d_PORT= graphics/${_QT_RELNAME}-3d		3d_PORT= graphics/${_QT_RELNAME}-3d
		rakucoUnsubmitted Not Done Inline Actions Style: "# Components", not "#Components". rakuco: Style: "# Components", not "#Components".
3d_LIB= libQt${_QT_LIBVER}3DCore.so		3d_LIB= libQt${_QT_LIBVER}3DCore.so

accessible_PORT= accessibility/${_QT_RELNAME}-accessible		accessible_PORT= accessibility/${_QT_RELNAME}-accessible
accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so		accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so

assistant_PORT= devel/${_QT_RELNAME}-assistant		assistant_PORT= devel/${_QT_RELNAME}-assistant
assistant_PATH= ${QT_BINDIR}/assistant${_QT_BINSUFX}		assistant_PATH= ${QT_BINDIR}/assistant

assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp		assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp
assistant-adp_PATH= ${QT_BINDIR}/assistant_adp		assistant-adp_PATH= ${QT_BINDIR}/assistant_adp

assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient		assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient
assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so		assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so

buildtools_PORT= devel/${_QT_RELNAME}-buildtools		buildtools_PORT= devel/${_QT_RELNAME}-buildtools
buildtools_PATH= ${MOC}		buildtools_PATH= ${MOC}

canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d		canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d
canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir		canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir

clucene_PORT= textproc/clucene-${_QT_RELNAME}		charts_PORT= x11-toolkits/${_QT_RELNAME}-charts
		charts_LIB= libQt${_QT_LIBVER}Charts.so

		clucene_PORT= textproc/${_QT_RELNAME}-clucene
clucene_LIB= libQt${_QT_LIBVER}CLucene.so		clucene_LIB= libQt${_QT_LIBVER}CLucene.so

codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn		codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn
codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so		codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so

codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp		codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp
codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so		codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so

Show All 10 Lines
connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so		connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so

core_PORT= devel/${_QT_RELNAME}-core		core_PORT= devel/${_QT_RELNAME}-core
core_LIB= libQt${_QT_LIBVER}Core.so		core_LIB= libQt${_QT_LIBVER}Core.so

corelib_PORT= devel/${_QT_RELNAME}-corelib		corelib_PORT= devel/${_QT_RELNAME}-corelib
corelib_LIB= ${core_LIB}		corelib_LIB= ${core_LIB}

dbus_PORT= devel/dbus-${_QT_RELNAME}		datavis3d_PORT= x11-toolkits/${_QT_RELNAME}-datavis3d
		datavis3d_LIB= libQt${_QT_LIBVER}DataVisualization.so

		dbus_PORT= devel/${_QT_RELNAME}-dbus
dbus_LIB= libQt${_QT_LIBVER}DBus.so		dbus_LIB= libQt${_QT_LIBVER}DBus.so

declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative		declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative
declarative_LIB= libQt${_QT_LIBVER}Declarative.so		declarative_LIB= libQt${_QT_LIBVER}Declarative.so

		declarative-render2d_PORT= x11-toolkits/${_QT_RELNAME}-declarative-render2d
		declarative-render2d_PATH= ${QT_PLUGINDIR}/scenegraph/libsoftwarecontext.so

demo_PORT= misc/${_QT_RELNAME}-qtdemo		demo_PORT= misc/${_QT_RELNAME}-qtdemo
demo_PATH= ${QT_BINDIR}/qtdemo		demo_PATH= ${QT_BINDIR}/qtdemo

designer_PORT= devel/${_QT_RELNAME}-designer		designer_PORT= devel/${_QT_RELNAME}-designer
designer_PATH= ${QT_BINDIR}/designer${_QT_BINSUFX}		designer_PATH= ${QT_BINDIR}/designer

doc_PORT= misc/${_QT_RELNAME}-doc		doc_PORT= misc/${_QT_RELNAME}-doc
doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}		doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}

examples_PORT= misc/${_QT_RELNAME}-examples		examples_PORT= misc/${_QT_RELNAME}-examples
examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}		examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}

		gamepad_PORT= x11-toolkits/${_QT_RELNAME}-gamepad
		gamepad_LIB= libQt${_QT_LIBVER}Gamepad.so

graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects		graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects
graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir		graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir

graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl		graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl
graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so		graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so

gui_PORT= x11-toolkits/${_QT_RELNAME}-gui		gui_PORT= x11-toolkits/${_QT_RELNAME}-gui
gui_LIB= libQt${_QT_LIBVER}Gui.so		gui_LIB= libQt${_QT_LIBVER}Gui.so
Show All 9 Lines

imageformats_PORT= graphics/${_QT_RELNAME}-imageformats		imageformats_PORT= graphics/${_QT_RELNAME}-imageformats
imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so		imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so

inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods		inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods
inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so		inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so

linguist_PORT= devel/${_QT_RELNAME}-linguist		linguist_PORT= devel/${_QT_RELNAME}-linguist
linguist_PATH= ${QT_BINDIR}/linguist${_QT_BINSUFX}		linguist_PATH= ${QT_BINDIR}/linguist

linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools		linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools
linguisttools_PATH= ${LRELEASE}		linguisttools_PATH= ${LRELEASE}

location_PORT= devel/${_QT_RELNAME}-location		location_PORT= devel/${_QT_RELNAME}-location
location_LIB= libQt${_QT_LIBVER}Location.so		location_LIB= libQt${_QT_LIBVER}Location.so

l10n_PORT= misc/${_QT_RELNAME}-l10n		l10n_PORT= misc/${_QT_RELNAME}-l10n
l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}		l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}

makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf		makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf
makeqpf_PATH= ${QT_BINDIR}/makeqpf${_QT_BINSUFX}		makeqpf_PATH= ${QT_BINDIR}/makeqpf

moc_PORT= devel/${_QT_RELNAME}-moc		moc_PORT= devel/${_QT_RELNAME}-moc
moc_PATH= ${MOC}		moc_PATH= ${MOC}

multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia		multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia
multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so		multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so

network_PORT= net/${_QT_RELNAME}-network		network_PORT= net/${_QT_RELNAME}-network
Show All 36 Lines
qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf		qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf

qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3		qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3
qdoc3_PATH= ${QT_BINDIR}/qdoc3		qdoc3_PATH= ${QT_BINDIR}/qdoc3

qev_PORT= x11/${_QT_RELNAME}-qev		qev_PORT= x11/${_QT_RELNAME}-qev
qev_PATH= ${QT_BINDIR}/qev		qev_PATH= ${QT_BINDIR}/qev

qmake_PORT= devel/qmake${_QT_VERSION:R:R}		qmake_PORT= devel/${_QT_RELNAME}-qmake
qmake_PATH= ${QMAKE}		qmake_PATH= ${QMAKE}

qml_PORT= lang/${_QT_RELNAME}-qml		qml_PORT= lang/${_QT_RELNAME}-qml
qml_LIB= libQt${_QT_LIBVER}Qml.so		qml_LIB= libQt${_QT_LIBVER}Qml.so

qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer		qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer
qmlviewer_PATH= ${QT_BINDIR}/qmlviewer		qmlviewer_PATH= ${QT_BINDIR}/qmlviewer

qt3support_PORT= devel/${_QT_RELNAME}-qt3support		qt3support_PORT= devel/${_QT_RELNAME}-qt3support
qt3support_LIB= libQt${_QT_LIBVER}3Support.so		qt3support_LIB= libQt${_QT_LIBVER}3Support.so

qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig		qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig
qtconfig_PATH= ${QT_BINDIR}/qtconfig${_QT_BINSUFX}		qtconfig_PATH= ${QT_BINDIR}/qtconfig

qtestlib_PORT= ${testlib_PORT}		qtestlib_PORT= ${testlib_PORT}
qtestlib_LIB= ${testlib_LIB}		qtestlib_LIB= ${testlib_LIB}

quick_PORT= x11-toolkits/${_QT_RELNAME}-quick		quick_PORT= x11-toolkits/${_QT_RELNAME}-quick
quick_LIB= libQt${_QT_LIBVER}Quick.so		quick_LIB= libQt${_QT_LIBVER}Quick.so

quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols		quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols
quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir		quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir

quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2		quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2
quickcontrols2_LIB= libQt${_QT_LIBVER}LabsTemplates.so		quickcontrols2_LIB= libQt${_QT_LIBVER}QuickControls2.so

qvfb_PORT= devel/${_QT_RELNAME}-qvfb		qvfb_PORT= devel/${_QT_RELNAME}-qvfb
qvfb_PATH= ${QT_BINDIR}/qvfb${_QT_BINSUFX}		qvfb_PATH= ${QT_BINDIR}/qvfb

rcc_PORT= devel/${_QT_RELNAME}-rcc		rcc_PORT= devel/${_QT_RELNAME}-rcc
rcc_PATH= ${RCC}		rcc_PATH= ${RCC}

sensors_PORT= comms/${_QT_RELNAME}-sensors		sensors_PORT= comms/${_QT_RELNAME}-sensors
sensors_LIB= libQt${_QT_LIBVER}Sensors.so		sensors_LIB= libQt${_QT_LIBVER}Sensors.so

script_PORT= devel/${_QT_RELNAME}-script		script_PORT= devel/${_QT_RELNAME}-script
script_LIB= libQt${_QT_LIBVER}Script.so		script_LIB= libQt${_QT_LIBVER}Script.so

scripttools_PORT= devel/${_QT_RELNAME}-scripttools		scripttools_PORT= devel/${_QT_RELNAME}-scripttools
scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so		scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so

		scxml_PORT= devel/${_QT_RELNAME}-scxml
		scxml_LIB= libQt${_QT_LIBVER}Scxml.so

serialbus_PORT= comms/${_QT_RELNAME}-serialbus		serialbus_PORT= comms/${_QT_RELNAME}-serialbus
serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so		serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so

serialport_PORT= comms/${_QT_RELNAME}-serialport		serialport_PORT= comms/${_QT_RELNAME}-serialport
serialport_LIB= libQt${_QT_LIBVER}SerialPort.so		serialport_LIB= libQt${_QT_LIBVER}SerialPort.so

sql_PORT= databases/${_QT_RELNAME}-sql		sql_PORT= databases/${_QT_RELNAME}-sql
sql_LIB= libQt${_QT_LIBVER}Sql.so		sql_LIB= libQt${_QT_LIBVER}Sql.so
Show All 28 Lines
uic3_PATH= ${QT_BINDIR}/uic3		uic3_PATH= ${QT_BINDIR}/uic3

uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin		uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin
uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin		uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin

uitools_PORT= devel/${_QT_RELNAME}-uitools		uitools_PORT= devel/${_QT_RELNAME}-uitools
uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a		uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a

		virtualkeyboard_PORT= x11-toolkits/${_QT_RELNAME}-virtualkeyboard
		virtualkeyboard_PATH= ${QT_PLUGINDIR}/platforminputcontexts/libqtvirtualkeyboardplugin.so

webchannel_PORT= www/${_QT_RELNAME}-webchannel		webchannel_PORT= www/${_QT_RELNAME}-webchannel
webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so		webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so

websockets_PORT= www/${_QT_RELNAME}-websockets		websockets_PORT= www/${_QT_RELNAME}-websockets
websockets_LIB= libQt${_QT_LIBVER}WebSockets.so		websockets_LIB= libQt${_QT_LIBVER}WebSockets.so

webkit_PORT= www/webkit-${_QT_RELNAME}		webkit_PORT= www/${_QT_RELNAME}-webkit
webkit_LIB= libQt${_QT_LIBVER}WebKit.so		webkit_LIB= libQt${_QT_LIBVER}WebKit.so

widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets		widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets
widgets_LIB= libQt${_QT_LIBVER}Widgets.so		widgets_LIB= libQt${_QT_LIBVER}Widgets.so

x11extras_PORT= x11/${_QT_RELNAME}-x11extras		x11extras_PORT= x11/${_QT_RELNAME}-x11extras
x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so		x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so

▲ Show 20 Lines • Show All 62 Lines • ▼ Show 20 Lines
. endif		. endif
. if ${PORTNAME} != "dbus"		. if ${PORTNAME} != "dbus"
_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp		_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp
. endif		. endif
. if ${PORTNAME} != "widgets"		. if ${PORTNAME} != "widgets"
_QT_TOOLS+= ${UIC}		_QT_TOOLS+= ${UIC}
. endif		. endif

		# The list of QtBase components that need to be linked into WRKSRC/lib for
		# other QtBase ports. See below.
		_QT5_BASE= core dbus gui network sql widgets

pre-configure: qtbase-pre-configure		pre-configure: qtbase-pre-configure
qtbase-pre-configure:		qtbase-pre-configure:
. for tool in ${_QT_TOOLS}		. for tool in ${_QT_TOOLS}
		tcbernerAuthorUnsubmitted Not Done Inline Actions I've been thinking of dropping this here, and defining _LINK components for these, and handling them like the other base dependencies in lines 680-688. (This would probably require some modifications to switch between ${QT_LIBDIR}/${comp_lib} resp ${QT_BINDIR}/${comp_bin} or something). But maybe it would be a nice simplification... tcberner: I've been thinking of dropping this here, and defining _LINK components for these, and handling…
@${TEST} -e ${QT_BINDIR}/${tool:T} && \		@${TEST} -e ${QT_BINDIR}/${tool:T} && \
${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} \|\| \		${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} \|\| \
${TRUE}		${TRUE}
. endfor		. endfor

		# The following is a fix for the inplace upgrade problem we faced (see
		# QTBUG-40825 and ports bugs 194088, 195105 and 198720) previously,
		# which previously was adressed by making sure, that ${LOCALBASE}/lib, which
		# would often gets added by pkgconf for the dependencies, was passed after
		# ${WRKSRC}/lib.
		# * We fix the inplace upgrade problem by moving the Qt5 libraries into
		# ${LOCALBASE}/lib/qt5. Therefore a -L${LOCALBASE}/lib does no harm anymore.
		# * However, this means, that the ports belonging to the split up QtBase package
		# now no longer can find their depending QtBase libraries. We fix this by
		# linking these into ${CONFIGURE_WRKSRC}/lib if the given QtBase port depends
		# on them.
		. if ${QT_DIST:Mbase}
		. for basedep in ${_QT5_BASE}
		. if ${USE_QT5:M${basedep}}
		${LN} -sf ${QT_LIBDIR}/${${basedep}_LIB} ${CONFIGURE_WRKSRC}/lib
		. endif
		. endfor
		. endif

		#
		# ** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **
		#
# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out		# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out
# certain paths from pkg-config calls (see the explanation in		# certain paths from pkg-config calls (see the explanation in
# devel/qt5/files/patch-configure) as well as for setting		# devel/qt5/files/patch-configure) as well as for setting
# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for		# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for
# ports/194088.		# ports/194088.
post-patch: qtbase-post-patch		post-patch: qtbase-post-patch
qtbase-post-patch:		qtbase-post-patch:
		rakucoUnsubmitted Done Inline Actions I think this can moved before the "Add ${LOCALBASE}/lib" block. rakuco: I think this can moved before the "Add ${LOCALBASE}/lib" block.
${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \		${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \
${WRKSRC}/configure		${WRKSRC}/configure

. if ${PORTNAME} != "qmake"		. if ${PORTNAME} != "qmake"
_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake		_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake

post-configure: qmake-configure		post-configure: qmake-configure
. endif		. endif
. endif # ${QT_DIST} == "base"		. endif # ${QT_DIST} == "base"

pre-configure: qt5-pre-configure		pre-configure: qt5-pre-configure
qt5-pre-configure:		qt5-pre-configure:
# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that		# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that
# requires tests/auto/cmake to be present, otherwise the configure stage will		# requires tests/auto/cmake to be present, otherwise the configure stage will
# fail.		# fail.
# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same		# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same
# time, we have to disable the check in a cache file (the only way to get this		# time, we have to disable the check in a cache file (the only way to get this
# value through to the configure script in qtbase).		# value through to the configure script in qtbase).
${MKDIR} ${CONFIGURE_WRKSRC}		${MKDIR} ${CONFIGURE_WRKSRC}
${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache		${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache
		#
		# ** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **
		#
# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to		# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to
# the linker before -L/usr/local/lib. By default, the opposite happens, which		# the linker before -L/usr/local/lib. By default, the opposite happens, which
# is a problem when a Qt port is being upgraded, since an existing library		# is a problem when a Qt port is being upgraded, since an existing library
# would end up being picked up instead of those built in ${WRKSRC}/lib. Since		# would end up being picked up instead of those built in ${WRKSRC}/lib. Since
# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the		# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the
# latter to get the linker path order right. qmake is smart enough to strip		# latter to get the linker path order right. qmake is smart enough to strip
# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.		# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.
# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.		# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.
▲ Show 20 Lines • Show All 41 Lines • Show Last 20 Lines

View Options

head/libexec/rtld-elf/mips/rtld_machdep.h

Show All 21 Lines
.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)		.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

Qt_Include_MAINTAINER= kde@FreeBSD.org		Qt_Include_MAINTAINER= kde@FreeBSD.org
Qt_Pre_Include= bsd.qt.mk		Qt_Pre_Include= bsd.qt.mk

# Qt versions currently supported by the framework.		# Qt versions currently supported by the framework.
_QT_SUPPORTED?= 4 5		_QT_SUPPORTED?= 4 5
QT4_VERSION?= 4.8.7		QT4_VERSION?= 4.8.7
QT5_VERSION?= 5.6.2		QT5_VERSION?= 5.7.1

_QT_RELNAME= qt${_QT_VERSION:R:R}		_QT_RELNAME= qt${_QT_VERSION:R:R}
_QT_VERSION= # empty		_QT_VERSION= # empty
.for ver in ${_QT_SUPPORTED}		.for ver in ${_QT_SUPPORTED}
. if defined(USE_QT${ver})		. if defined(USE_QT${ver})
. if empty(_QT_VERSION)		. if empty(_QT_VERSION)
_QT_VERSION= ${QT${ver}_VERSION}		_QT_VERSION= ${QT${ver}_VERSION}
. else		. else
# Reject different USE_QT*.		# Reject different USE_QT*.
IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'		IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
. endif		. endif
. endif		. endif
.endfor		.endfor

.if empty(_QT_VERSION)		.if empty(_QT_VERSION)
# The file was included without USE_QT*.		# The file was included without USE_QT*.
IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'		IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
.endif		.endif

.if defined(QT_DIST)		.if defined(QT_DIST)
QT_NONSTANDARD= yes		QT_NONSTANDARD= yes

MASTER_SITES= ${MASTER_SITE_QT}		MASTER_SITES= ${MASTER_SITE_QT}
# Useless, as it must be defined before including bsd.port.pre.mk (at least
# because of bsd.options.mk).
#PKGNAMEPREFIX?= ${_QT_RELNAME}-
DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo		DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo

LICENSE?= LGPL21		LICENSE?= LGPL21

. if !exists(${PKGDIR}/pkg-descr)		. if !exists(${PKGDIR}/pkg-descr)
DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr		DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr
. endif		. endif

Show All 21 Lines
# better not to fix what is not explicitly broken there.		# better not to fix what is not explicitly broken there.
LDFLAGS+= -Wl,--as-needed		LDFLAGS+= -Wl,--as-needed

. if ${.TARGETS:Mmakesum} \|\| ${.TARGETS:Mfetch} && \		. if ${.TARGETS:Mmakesum} \|\| ${.TARGETS:Mfetch} && \
defined(DISABLE_SIZE) && defined(NO_CHECKSUM)		defined(DISABLE_SIZE) && defined(NO_CHECKSUM)
# Ensure that the "makesum" target (with its inner "fetch" one) uses		# Ensure that the "makesum" target (with its inner "fetch" one) uses
# devel/qt*/distinfo for every port.		# devel/qt*/distinfo for every port.
. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}		. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}
QT_DIST= 3d base canvas3d connectivity declarative graphicaleffects imageformats \		QT_DIST= 3d base canvas3d charts connectivity datavis3d declarative \
location multimedia quickcontrols quickcontrols2 script sensors serialbus serialport svg tools \		declarative-render2d gamepad graphicaleffects imageformats \
translations webchannel websockets x11extras xmlpatterns		location multimedia quickcontrols quickcontrols2 script scxml \
		sensors serialbus serialport svg tools translations \
		virtualkeyboard webchannel webkit websockets x11extras \
		xmlpatterns
. endif		. endif
		matUnsubmitted Done Inline Actions i think there is a level of indentation missing here in all but the first line. mat: i think there is a level of indentation missing here in all but the first line.
		matUnsubmitted Not Done Inline Actions These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4. mat: These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4.
. endif		. endif

. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"		. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies.		# Qt configure requires pkg-config to detect dependencies.
USES+= pkgconfig		USES+= pkgconfig

# Set QMAKESPEC when building qtbase so that qmake (called by the configure		# Set QMAKESPEC when building qtbase so that qmake (called by the configure
# script) can find the mkspecs we create ourselves in devel/qmake5.		# script) can find the mkspecs we create ourselves in devel/qmake5.
Show All 36 Lines	CONFIGURE_ARGS+=-nomake examples -nomake tests \
-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \		-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \		-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
-qmldir ${PREFIX}/${QT_QMLDIR_REL} \		-qmldir ${PREFIX}/${QT_QMLDIR_REL} \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \		-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
-testsdir ${PREFIX}/${QT_TESTDIR_REL}		-testsdir ${PREFIX}/${QT_TESTDIR_REL}
. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)		. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)
CONFIGURE_ARGS+=-no-sse2		CONFIGURE_ARGS+=-no-sse2
. endif		. endif

. endif		. endif
		rakucoUnsubmitted Done Inline Actions Can you add a bigger description of why we do this? rakuco: Can you add a bigger description of why we do this?

. if defined(WANT_QT_DEBUG) \|\| defined(WITH_DEBUG)		. if defined(WANT_QT_DEBUG) \|\| defined(WITH_DEBUG)
WITH_DEBUG= yes		WITH_DEBUG= yes
STRIP= # It's done prior to bsd.qt.mk inclusion.		STRIP= # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+=-debug -separate-debug-info		CONFIGURE_ARGS+=-debug -separate-debug-info
# Override configuration in global qconfig.pri.		# Override configuration in global qconfig.pri.
QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \		QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \
QT_CONFIG-="release"		QT_CONFIG-="release"
Show All 9 Lines
CONFIGURE_ARGS+=-verbose		CONFIGURE_ARGS+=-verbose
. endif		. endif

. if ${QT_DIST} == "base" \|\| ${_QT_VERSION:M4*}		. if ${QT_DIST} == "base" \|\| ${_QT_VERSION:M4*}
. if ${_QT_VERSION:M4*}		. if ${_QT_VERSION:M4*}
_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \		_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool
. else		. else
_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src_corelib_global_qcompilerdetection.h \		_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf
. endif		. endif
EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \		EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \
${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}		${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}
. endif		. endif

# Override settings installed in qconfig.h and *.pri files. The flags will be		# Override settings installed in qconfig.h and *.pri files. The flags will be
Show All 15 Lines
. endif		. endif
. if ${QT_CONFIG:N-*}		. if ${QT_CONFIG:N-*}
QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"		QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif		. endif
. if ${QT_CONFIG:M-*}		. if ${QT_CONFIG:M-*}
QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"		QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif		. endif

		# Add a RUN_DEPENDS on misc/qtchooser to select the binaries.
		# The binaries of both supported Qt versions are installed to
		# ${LOCALBASE}/lib/qt[45]/bin. The port misc/qtchooser installs
		# wrapper binaries into ${LOCALBASE}/bin, and chooses the correct
		# one depending on the value of QT_SELECT (which we pass to both
		# CONFIGURE_ENV and MAKE_ENV). Therefore make all QT_DIST ports
		# RUN_DEPEND on it.
		RUN_DEPENDS+= qtchooser:misc/qtchooser

PLIST_SUB+= SHORTVER=${DISTVERSION:R} \		PLIST_SUB+= SHORTVER=${DISTVERSION:R} \
FULLVER=${DISTVERSION:C/-.*//}		FULLVER=${DISTVERSION:C/-.*//}
.endif # defined(QT_DIST)		.endif # defined(QT_DIST)

.if ${_QT_VERSION:M4*}
QT_BINDIR_REL?= bin
QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_PLUGINDIR_REL?= ${QT_LIBDIR_REL}/plugins
QT_IMPORTDIR_REL?= ${QT_LIBDIR_REL}/imports
.endif

# A wrapper (qtchooser) is used to invoke binaries.		# A wrapper (qtchooser) is used to invoke binaries.
QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin		QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin
QT_INCDIR_REL?= include/${_QT_RELNAME}		QT_INCDIR_REL?= include/${_QT_RELNAME}
QT_LIBDIR_REL?= lib		QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_ARCHDIR_REL?=${QT_LIBDIR_REL}/${_QT_RELNAME}		QT_ARCHDIR_REL?=${QT_LIBDIR_REL}
QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins		QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins
QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}		QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}
QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports		QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports
QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml		QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml
QT_DATADIR_REL?=share/${_QT_RELNAME}		QT_DATADIR_REL?=share/${_QT_RELNAME}
QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}		QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}
QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations		QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations
QT_ETCDIR_REL?= etc/xdg		QT_ETCDIR_REL?= etc/xdg
QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}		QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}
QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests		QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests
		QT_CMAKEDIR_REL?= lib/cmake
		QT_QTCHOOSERDIR_REL?= ${QT_ETCDIR_REL}/qtchooser

# Not customizable.		# Not customizable.
.if ${_QT_VERSION:M4*}		.if ${_QT_VERSION:M4*}
QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs		QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs

_QT_LIBVER= # empty		_QT_LIBVER= # empty
_QT_BINSUFX= -${_QT_RELNAME}
.else		.else
QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs		QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs

_QT_LIBVER= ${_QT_VERSION:R:R}		_QT_LIBVER= ${_QT_VERSION:R:R}
_QT_BINSUFX= # empty
.endif		.endif

LRELEASE?= ${QT_BINDIR}/lrelease${_QT_BINSUFX}		LRELEASE?= ${QT_BINDIR}/lrelease
LUPDATE?= ${QT_BINDIR}/lupdate${_QT_BINSUFX}		LUPDATE?= ${QT_BINDIR}/lupdate
MOC?= ${QT_BINDIR}/moc${_QT_BINSUFX}		MOC?= ${QT_BINDIR}/moc
RCC?= ${QT_BINDIR}/rcc		RCC?= ${QT_BINDIR}/rcc
UIC?= ${QT_BINDIR}/uic${_QT_BINSUFX}		UIC?= ${QT_BINDIR}/uic
QMAKE?= ${QT_BINDIR}/qmake${_QT_BINSUFX}		QMAKE?= ${QT_BINDIR}/qmake
# Needed to redefine the qmake target for internal Qt configuration.		# Needed to redefine the qmake target for internal Qt configuration.
		matUnsubmitted Not Done Inline Actions If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not QT_BINDIR. (If they are the ones in PREFIX/some-qt-directory then it's ok.) mat: If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not…
		tcbernerAuthorUnsubmitted Not Done Inline Actions These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` . tcberner: These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` .
_QMAKE?= ${QMAKE}		_QMAKE?= ${QMAKE}
QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}		QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}

# The whole Qt distribution should be built with the same compiler, but it's		# The whole Qt distribution should be built with the same compiler, but it's
# better to support custom settings. Dereferencing the detection allows to		# better to support custom settings. Dereferencing the detection allows to
# avoid forking a shell on each inclusion of this file, and to catch any CXX		# avoid forking a shell on each inclusion of this file, and to catch any CXX
# customization (via USE_GCC, etc.).		# customization (via USE_GCC, etc.).
QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in clang) echo clang ;; *) echo g++ ;; esac)		QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in clang) echo clang ;; *) echo g++ ;; esac)

# Import QMAKE_ENV and QMAKE_ARGS definitions.		# Import QMAKE_ENV and QMAKE_ARGS definitions.
USES+= qmake:_env		USES+= qmake:_env

.for dir in INC ARCH PLUGIN LIBEXEC IMPORT \		.for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \
QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC		QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC \
		CMAKE QTCHOOSER
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}		QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
		# Export all directories to the plist substituion for QT_DIST ports.
		rakucoUnsubmitted Done Inline Actions Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space before "QT_DIST". Additionally, the comment is basically describing what we can see below, it'd be more helpful if it explained why instead. rakuco: Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space…
		# For the others, exclude QT_CMAKEDIR and QT_ETCDIR.
		. if (${dir:NCMAKE} && ${dir:NETC}) \|\| defined(QT_DIST)
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"		PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
.endfor

.for dir in BIN LIB
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
. if defined(QT_DIST)
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
. endif		. endif
.endfor		.endfor

		# Pass the chosen Qt version to the environment for qtchooser
		rakucoUnsubmitted Done Inline Actions Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences with a period. rakuco: Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences…
		CONFIGURE_ENV+= QT_SELECT=${_QT_RELNAME}
		MAKE_ENV+= QT_SELECT=${_QT_RELNAME}

.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)		.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)		.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)

Qt_Post_Include= bsd.qt.mk		Qt_Post_Include= bsd.qt.mk

.if !defined(QT_NONSTANDARD)		.if !defined(QT_NONSTANDARD)
CONFIGURE_ENV+= QTDIR="${PREFIX}" QMAKE="${QMAKE}" \		CONFIGURE_ENV+= QTDIR="${QT_ARCHDIR}" QMAKE="${QMAKE}" \
MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \		MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \
QMAKESPEC="${QMAKESPEC}"		QMAKESPEC="${QMAKESPEC}"
CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \		CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \
--with-qt-libraries=${QT_LIBDIR} \		--with-qt-libraries=${QT_LIBDIR} \
--with-extra-includes=${LOCALBASE}/include \		--with-extra-includes=${LOCALBASE}/include \
--with-extra-libs=${LOCALBASE}/lib		--with-extra-libs=${LOCALBASE}/lib
.endif # !defined(QT_NONSTANDARD)		.endif # !defined(QT_NONSTANDARD)

_USE_QT_ALL= assistant dbus declarative designer doc gui help \		_USE_QT_ALL= assistant dbus declarative designer doc gui help \
imageformats l10n linguist linguisttools multimedia \		imageformats l10n linguist linguisttools multimedia \
network opengl pixeltool qdbusviewer qmake script \		network opengl pixeltool qdbusviewer qmake script \
scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \		scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \
sql-sqlite2 sql-sqlite3 svg testlib webkit \		sql-sqlite2 sql-sqlite3 svg testlib webkit \
xml xmlpatterns		xml xmlpatterns

_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \		_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \
codecs-kr codecs-tw corelib demo graphicssystems-opengl \		codecs-kr codecs-tw corelib demo graphicssystems-opengl \
help-tools iconengines inputmethods makeqpf moc phonon \		help-tools iconengines inputmethods makeqpf moc phonon \
phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \		phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \
qtestlib qvfb rcc uic uic3 xmlpatterns-tool		qtestlib qvfb rcc uic uic3 xmlpatterns-tool

_USE_QT5_ONLY= 3d buildtools canvas3d concurrent connectivity core \		_USE_QT5_ONLY= 3d buildtools canvas3d charts concurrent connectivity \
examples graphicaleffects location paths phonon4 \		core datavis3d declarative-render2d examples gamepad \
printsupport qdbus qdoc qdoc-data qev qml quick quickcontrols \		graphicaleffects location paths phonon4 printsupport \
quickcontrols2 sensors serialbus serialport sql-tds \		qdbus qdoc qdoc-data qev qml quick quickcontrols \
uiplugin uitools webchannel websockets widgets x11extras		quickcontrols2 scxml sensors serialbus serialport \
		sql-tds uiplugin uitools virtualkeyboard webchannel \
		websockets widgets x11extras

3d_PORT= graphics/${_QT_RELNAME}-3d		3d_PORT= graphics/${_QT_RELNAME}-3d
		rakucoUnsubmitted Not Done Inline Actions Style: "# Components", not "#Components". rakuco: Style: "# Components", not "#Components".
3d_LIB= libQt${_QT_LIBVER}3DCore.so		3d_LIB= libQt${_QT_LIBVER}3DCore.so

accessible_PORT= accessibility/${_QT_RELNAME}-accessible		accessible_PORT= accessibility/${_QT_RELNAME}-accessible
accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so		accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so

assistant_PORT= devel/${_QT_RELNAME}-assistant		assistant_PORT= devel/${_QT_RELNAME}-assistant
assistant_PATH= ${QT_BINDIR}/assistant${_QT_BINSUFX}		assistant_PATH= ${QT_BINDIR}/assistant

assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp		assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp
assistant-adp_PATH= ${QT_BINDIR}/assistant_adp		assistant-adp_PATH= ${QT_BINDIR}/assistant_adp

assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient		assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient
assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so		assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so

buildtools_PORT= devel/${_QT_RELNAME}-buildtools		buildtools_PORT= devel/${_QT_RELNAME}-buildtools
buildtools_PATH= ${MOC}		buildtools_PATH= ${MOC}

canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d		canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d
canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir		canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir

clucene_PORT= textproc/clucene-${_QT_RELNAME}		charts_PORT= x11-toolkits/${_QT_RELNAME}-charts
		charts_LIB= libQt${_QT_LIBVER}Charts.so

		clucene_PORT= textproc/${_QT_RELNAME}-clucene
clucene_LIB= libQt${_QT_LIBVER}CLucene.so		clucene_LIB= libQt${_QT_LIBVER}CLucene.so

codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn		codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn
codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so		codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so

codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp		codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp
codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so		codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so

Show All 10 Lines
connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so		connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so

core_PORT= devel/${_QT_RELNAME}-core		core_PORT= devel/${_QT_RELNAME}-core
core_LIB= libQt${_QT_LIBVER}Core.so		core_LIB= libQt${_QT_LIBVER}Core.so

corelib_PORT= devel/${_QT_RELNAME}-corelib		corelib_PORT= devel/${_QT_RELNAME}-corelib
corelib_LIB= ${core_LIB}		corelib_LIB= ${core_LIB}

dbus_PORT= devel/dbus-${_QT_RELNAME}		datavis3d_PORT= x11-toolkits/${_QT_RELNAME}-datavis3d
		datavis3d_LIB= libQt${_QT_LIBVER}DataVisualization.so

		dbus_PORT= devel/${_QT_RELNAME}-dbus
dbus_LIB= libQt${_QT_LIBVER}DBus.so		dbus_LIB= libQt${_QT_LIBVER}DBus.so

declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative		declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative
declarative_LIB= libQt${_QT_LIBVER}Declarative.so		declarative_LIB= libQt${_QT_LIBVER}Declarative.so

		declarative-render2d_PORT= x11-toolkits/${_QT_RELNAME}-declarative-render2d
		declarative-render2d_PATH= ${QT_PLUGINDIR}/scenegraph/libsoftwarecontext.so

demo_PORT= misc/${_QT_RELNAME}-qtdemo		demo_PORT= misc/${_QT_RELNAME}-qtdemo
demo_PATH= ${QT_BINDIR}/qtdemo		demo_PATH= ${QT_BINDIR}/qtdemo

designer_PORT= devel/${_QT_RELNAME}-designer		designer_PORT= devel/${_QT_RELNAME}-designer
designer_PATH= ${QT_BINDIR}/designer${_QT_BINSUFX}		designer_PATH= ${QT_BINDIR}/designer

doc_PORT= misc/${_QT_RELNAME}-doc		doc_PORT= misc/${_QT_RELNAME}-doc
doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}		doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}

examples_PORT= misc/${_QT_RELNAME}-examples		examples_PORT= misc/${_QT_RELNAME}-examples
examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}		examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}

		gamepad_PORT= x11-toolkits/${_QT_RELNAME}-gamepad
		gamepad_LIB= libQt${_QT_LIBVER}Gamepad.so

graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects		graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects
graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir		graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir

graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl		graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl
graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so		graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so

gui_PORT= x11-toolkits/${_QT_RELNAME}-gui		gui_PORT= x11-toolkits/${_QT_RELNAME}-gui
gui_LIB= libQt${_QT_LIBVER}Gui.so		gui_LIB= libQt${_QT_LIBVER}Gui.so
Show All 9 Lines

imageformats_PORT= graphics/${_QT_RELNAME}-imageformats		imageformats_PORT= graphics/${_QT_RELNAME}-imageformats
imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so		imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so

inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods		inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods
inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so		inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so

linguist_PORT= devel/${_QT_RELNAME}-linguist		linguist_PORT= devel/${_QT_RELNAME}-linguist
linguist_PATH= ${QT_BINDIR}/linguist${_QT_BINSUFX}		linguist_PATH= ${QT_BINDIR}/linguist

linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools		linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools
linguisttools_PATH= ${LRELEASE}		linguisttools_PATH= ${LRELEASE}

location_PORT= devel/${_QT_RELNAME}-location		location_PORT= devel/${_QT_RELNAME}-location
location_LIB= libQt${_QT_LIBVER}Location.so		location_LIB= libQt${_QT_LIBVER}Location.so

l10n_PORT= misc/${_QT_RELNAME}-l10n		l10n_PORT= misc/${_QT_RELNAME}-l10n
l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}		l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}

makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf		makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf
makeqpf_PATH= ${QT_BINDIR}/makeqpf${_QT_BINSUFX}		makeqpf_PATH= ${QT_BINDIR}/makeqpf

moc_PORT= devel/${_QT_RELNAME}-moc		moc_PORT= devel/${_QT_RELNAME}-moc
moc_PATH= ${MOC}		moc_PATH= ${MOC}

multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia		multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia
multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so		multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so

network_PORT= net/${_QT_RELNAME}-network		network_PORT= net/${_QT_RELNAME}-network
Show All 36 Lines
qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf		qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf

qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3		qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3
qdoc3_PATH= ${QT_BINDIR}/qdoc3		qdoc3_PATH= ${QT_BINDIR}/qdoc3

qev_PORT= x11/${_QT_RELNAME}-qev		qev_PORT= x11/${_QT_RELNAME}-qev
qev_PATH= ${QT_BINDIR}/qev		qev_PATH= ${QT_BINDIR}/qev

qmake_PORT= devel/qmake${_QT_VERSION:R:R}		qmake_PORT= devel/${_QT_RELNAME}-qmake
qmake_PATH= ${QMAKE}		qmake_PATH= ${QMAKE}

qml_PORT= lang/${_QT_RELNAME}-qml		qml_PORT= lang/${_QT_RELNAME}-qml
qml_LIB= libQt${_QT_LIBVER}Qml.so		qml_LIB= libQt${_QT_LIBVER}Qml.so

qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer		qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer
qmlviewer_PATH= ${QT_BINDIR}/qmlviewer		qmlviewer_PATH= ${QT_BINDIR}/qmlviewer

qt3support_PORT= devel/${_QT_RELNAME}-qt3support		qt3support_PORT= devel/${_QT_RELNAME}-qt3support
qt3support_LIB= libQt${_QT_LIBVER}3Support.so		qt3support_LIB= libQt${_QT_LIBVER}3Support.so

qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig		qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig
qtconfig_PATH= ${QT_BINDIR}/qtconfig${_QT_BINSUFX}		qtconfig_PATH= ${QT_BINDIR}/qtconfig

qtestlib_PORT= ${testlib_PORT}		qtestlib_PORT= ${testlib_PORT}
qtestlib_LIB= ${testlib_LIB}		qtestlib_LIB= ${testlib_LIB}

quick_PORT= x11-toolkits/${_QT_RELNAME}-quick		quick_PORT= x11-toolkits/${_QT_RELNAME}-quick
quick_LIB= libQt${_QT_LIBVER}Quick.so		quick_LIB= libQt${_QT_LIBVER}Quick.so

quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols		quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols
quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir		quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir

quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2		quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2
quickcontrols2_LIB= libQt${_QT_LIBVER}LabsTemplates.so		quickcontrols2_LIB= libQt${_QT_LIBVER}QuickControls2.so

qvfb_PORT= devel/${_QT_RELNAME}-qvfb		qvfb_PORT= devel/${_QT_RELNAME}-qvfb
qvfb_PATH= ${QT_BINDIR}/qvfb${_QT_BINSUFX}		qvfb_PATH= ${QT_BINDIR}/qvfb

rcc_PORT= devel/${_QT_RELNAME}-rcc		rcc_PORT= devel/${_QT_RELNAME}-rcc
rcc_PATH= ${RCC}		rcc_PATH= ${RCC}

sensors_PORT= comms/${_QT_RELNAME}-sensors		sensors_PORT= comms/${_QT_RELNAME}-sensors
sensors_LIB= libQt${_QT_LIBVER}Sensors.so		sensors_LIB= libQt${_QT_LIBVER}Sensors.so

script_PORT= devel/${_QT_RELNAME}-script		script_PORT= devel/${_QT_RELNAME}-script
script_LIB= libQt${_QT_LIBVER}Script.so		script_LIB= libQt${_QT_LIBVER}Script.so

scripttools_PORT= devel/${_QT_RELNAME}-scripttools		scripttools_PORT= devel/${_QT_RELNAME}-scripttools
scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so		scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so

		scxml_PORT= devel/${_QT_RELNAME}-scxml
		scxml_LIB= libQt${_QT_LIBVER}Scxml.so

serialbus_PORT= comms/${_QT_RELNAME}-serialbus		serialbus_PORT= comms/${_QT_RELNAME}-serialbus
serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so		serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so

serialport_PORT= comms/${_QT_RELNAME}-serialport		serialport_PORT= comms/${_QT_RELNAME}-serialport
serialport_LIB= libQt${_QT_LIBVER}SerialPort.so		serialport_LIB= libQt${_QT_LIBVER}SerialPort.so

sql_PORT= databases/${_QT_RELNAME}-sql		sql_PORT= databases/${_QT_RELNAME}-sql
sql_LIB= libQt${_QT_LIBVER}Sql.so		sql_LIB= libQt${_QT_LIBVER}Sql.so
Show All 28 Lines
uic3_PATH= ${QT_BINDIR}/uic3		uic3_PATH= ${QT_BINDIR}/uic3

uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin		uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin
uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin		uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin

uitools_PORT= devel/${_QT_RELNAME}-uitools		uitools_PORT= devel/${_QT_RELNAME}-uitools
uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a		uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a

		virtualkeyboard_PORT= x11-toolkits/${_QT_RELNAME}-virtualkeyboard
		virtualkeyboard_PATH= ${QT_PLUGINDIR}/platforminputcontexts/libqtvirtualkeyboardplugin.so

webchannel_PORT= www/${_QT_RELNAME}-webchannel		webchannel_PORT= www/${_QT_RELNAME}-webchannel
webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so		webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so

websockets_PORT= www/${_QT_RELNAME}-websockets		websockets_PORT= www/${_QT_RELNAME}-websockets
websockets_LIB= libQt${_QT_LIBVER}WebSockets.so		websockets_LIB= libQt${_QT_LIBVER}WebSockets.so

webkit_PORT= www/webkit-${_QT_RELNAME}		webkit_PORT= www/${_QT_RELNAME}-webkit
webkit_LIB= libQt${_QT_LIBVER}WebKit.so		webkit_LIB= libQt${_QT_LIBVER}WebKit.so

widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets		widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets
widgets_LIB= libQt${_QT_LIBVER}Widgets.so		widgets_LIB= libQt${_QT_LIBVER}Widgets.so

x11extras_PORT= x11/${_QT_RELNAME}-x11extras		x11extras_PORT= x11/${_QT_RELNAME}-x11extras
x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so		x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so

▲ Show 20 Lines • Show All 62 Lines • ▼ Show 20 Lines
. endif		. endif
. if ${PORTNAME} != "dbus"		. if ${PORTNAME} != "dbus"
_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp		_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp
. endif		. endif
. if ${PORTNAME} != "widgets"		. if ${PORTNAME} != "widgets"
_QT_TOOLS+= ${UIC}		_QT_TOOLS+= ${UIC}
. endif		. endif

		# The list of QtBase components that need to be linked into WRKSRC/lib for
		# other QtBase ports. See below.
		_QT5_BASE= core dbus gui network sql widgets

pre-configure: qtbase-pre-configure		pre-configure: qtbase-pre-configure
qtbase-pre-configure:		qtbase-pre-configure:
. for tool in ${_QT_TOOLS}		. for tool in ${_QT_TOOLS}
		tcbernerAuthorUnsubmitted Not Done Inline Actions I've been thinking of dropping this here, and defining _LINK components for these, and handling them like the other base dependencies in lines 680-688. (This would probably require some modifications to switch between ${QT_LIBDIR}/${comp_lib} resp ${QT_BINDIR}/${comp_bin} or something). But maybe it would be a nice simplification... tcberner: I've been thinking of dropping this here, and defining _LINK components for these, and handling…
@${TEST} -e ${QT_BINDIR}/${tool:T} && \		@${TEST} -e ${QT_BINDIR}/${tool:T} && \
${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} \|\| \		${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} \|\| \
${TRUE}		${TRUE}
. endfor		. endfor

		# The following is a fix for the inplace upgrade problem we faced (see
		# QTBUG-40825 and ports bugs 194088, 195105 and 198720) previously,
		# which previously was adressed by making sure, that ${LOCALBASE}/lib, which
		# would often gets added by pkgconf for the dependencies, was passed after
		# ${WRKSRC}/lib.
		# * We fix the inplace upgrade problem by moving the Qt5 libraries into
		# ${LOCALBASE}/lib/qt5. Therefore a -L${LOCALBASE}/lib does no harm anymore.
		# * However, this means, that the ports belonging to the split up QtBase package
		# now no longer can find their depending QtBase libraries. We fix this by
		# linking these into ${CONFIGURE_WRKSRC}/lib if the given QtBase port depends
		# on them.
		. if ${QT_DIST:Mbase}
		. for basedep in ${_QT5_BASE}
		. if ${USE_QT5:M${basedep}}
		${LN} -sf ${QT_LIBDIR}/${${basedep}_LIB} ${CONFIGURE_WRKSRC}/lib
		. endif
		. endfor
		. endif

		#
		# ** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **
		#
# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out		# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out
# certain paths from pkg-config calls (see the explanation in		# certain paths from pkg-config calls (see the explanation in
# devel/qt5/files/patch-configure) as well as for setting		# devel/qt5/files/patch-configure) as well as for setting
# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for		# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for
# ports/194088.		# ports/194088.
post-patch: qtbase-post-patch		post-patch: qtbase-post-patch
qtbase-post-patch:		qtbase-post-patch:
		rakucoUnsubmitted Done Inline Actions I think this can moved before the "Add ${LOCALBASE}/lib" block. rakuco: I think this can moved before the "Add ${LOCALBASE}/lib" block.
${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \		${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \
${WRKSRC}/configure		${WRKSRC}/configure

. if ${PORTNAME} != "qmake"		. if ${PORTNAME} != "qmake"
_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake		_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake

post-configure: qmake-configure		post-configure: qmake-configure
. endif		. endif
. endif # ${QT_DIST} == "base"		. endif # ${QT_DIST} == "base"

pre-configure: qt5-pre-configure		pre-configure: qt5-pre-configure
qt5-pre-configure:		qt5-pre-configure:
# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that		# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that
# requires tests/auto/cmake to be present, otherwise the configure stage will		# requires tests/auto/cmake to be present, otherwise the configure stage will
# fail.		# fail.
# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same		# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same
# time, we have to disable the check in a cache file (the only way to get this		# time, we have to disable the check in a cache file (the only way to get this
# value through to the configure script in qtbase).		# value through to the configure script in qtbase).
${MKDIR} ${CONFIGURE_WRKSRC}		${MKDIR} ${CONFIGURE_WRKSRC}
${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache		${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache
		#
		# ** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **
		#
# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to		# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to
# the linker before -L/usr/local/lib. By default, the opposite happens, which		# the linker before -L/usr/local/lib. By default, the opposite happens, which
# is a problem when a Qt port is being upgraded, since an existing library		# is a problem when a Qt port is being upgraded, since an existing library
# would end up being picked up instead of those built in ${WRKSRC}/lib. Since		# would end up being picked up instead of those built in ${WRKSRC}/lib. Since
# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the		# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the
# latter to get the linker path order right. qmake is smart enough to strip		# latter to get the linker path order right. qmake is smart enough to strip
# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.		# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.
# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.		# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.
▲ Show 20 Lines • Show All 41 Lines • Show Last 20 Lines

View Options

head/libexec/rtld-elf/powerpc/rtld_machdep.h

Show All 21 Lines
.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)		.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

Qt_Include_MAINTAINER= kde@FreeBSD.org		Qt_Include_MAINTAINER= kde@FreeBSD.org
Qt_Pre_Include= bsd.qt.mk		Qt_Pre_Include= bsd.qt.mk

# Qt versions currently supported by the framework.		# Qt versions currently supported by the framework.
_QT_SUPPORTED?= 4 5		_QT_SUPPORTED?= 4 5
QT4_VERSION?= 4.8.7		QT4_VERSION?= 4.8.7
QT5_VERSION?= 5.6.2		QT5_VERSION?= 5.7.1

_QT_RELNAME= qt${_QT_VERSION:R:R}		_QT_RELNAME= qt${_QT_VERSION:R:R}
_QT_VERSION= # empty		_QT_VERSION= # empty
.for ver in ${_QT_SUPPORTED}		.for ver in ${_QT_SUPPORTED}
. if defined(USE_QT${ver})		. if defined(USE_QT${ver})
. if empty(_QT_VERSION)		. if empty(_QT_VERSION)
_QT_VERSION= ${QT${ver}_VERSION}		_QT_VERSION= ${QT${ver}_VERSION}
. else		. else
# Reject different USE_QT*.		# Reject different USE_QT*.
IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'		IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
. endif		. endif
. endif		. endif
.endfor		.endfor

.if empty(_QT_VERSION)		.if empty(_QT_VERSION)
# The file was included without USE_QT*.		# The file was included without USE_QT*.
IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'		IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
.endif		.endif

.if defined(QT_DIST)		.if defined(QT_DIST)
QT_NONSTANDARD= yes		QT_NONSTANDARD= yes

MASTER_SITES= ${MASTER_SITE_QT}		MASTER_SITES= ${MASTER_SITE_QT}
# Useless, as it must be defined before including bsd.port.pre.mk (at least
# because of bsd.options.mk).
#PKGNAMEPREFIX?= ${_QT_RELNAME}-
DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo		DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo

LICENSE?= LGPL21		LICENSE?= LGPL21

. if !exists(${PKGDIR}/pkg-descr)		. if !exists(${PKGDIR}/pkg-descr)
DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr		DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr
. endif		. endif

Show All 21 Lines
# better not to fix what is not explicitly broken there.		# better not to fix what is not explicitly broken there.
LDFLAGS+= -Wl,--as-needed		LDFLAGS+= -Wl,--as-needed

. if ${.TARGETS:Mmakesum} \|\| ${.TARGETS:Mfetch} && \		. if ${.TARGETS:Mmakesum} \|\| ${.TARGETS:Mfetch} && \
defined(DISABLE_SIZE) && defined(NO_CHECKSUM)		defined(DISABLE_SIZE) && defined(NO_CHECKSUM)
# Ensure that the "makesum" target (with its inner "fetch" one) uses		# Ensure that the "makesum" target (with its inner "fetch" one) uses
# devel/qt*/distinfo for every port.		# devel/qt*/distinfo for every port.
. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}		. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}
QT_DIST= 3d base canvas3d connectivity declarative graphicaleffects imageformats \		QT_DIST= 3d base canvas3d charts connectivity datavis3d declarative \
location multimedia quickcontrols quickcontrols2 script sensors serialbus serialport svg tools \		declarative-render2d gamepad graphicaleffects imageformats \
translations webchannel websockets x11extras xmlpatterns		location multimedia quickcontrols quickcontrols2 script scxml \
		sensors serialbus serialport svg tools translations \
		virtualkeyboard webchannel webkit websockets x11extras \
		xmlpatterns
. endif		. endif
		matUnsubmitted Done Inline Actions i think there is a level of indentation missing here in all but the first line. mat: i think there is a level of indentation missing here in all but the first line.
		matUnsubmitted Not Done Inline Actions These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4. mat: These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4.
. endif		. endif

. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"		. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies.		# Qt configure requires pkg-config to detect dependencies.
USES+= pkgconfig		USES+= pkgconfig

# Set QMAKESPEC when building qtbase so that qmake (called by the configure		# Set QMAKESPEC when building qtbase so that qmake (called by the configure
# script) can find the mkspecs we create ourselves in devel/qmake5.		# script) can find the mkspecs we create ourselves in devel/qmake5.
Show All 36 Lines	CONFIGURE_ARGS+=-nomake examples -nomake tests \
-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \		-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \		-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
-qmldir ${PREFIX}/${QT_QMLDIR_REL} \		-qmldir ${PREFIX}/${QT_QMLDIR_REL} \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \		-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
-testsdir ${PREFIX}/${QT_TESTDIR_REL}		-testsdir ${PREFIX}/${QT_TESTDIR_REL}
. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)		. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)
CONFIGURE_ARGS+=-no-sse2		CONFIGURE_ARGS+=-no-sse2
. endif		. endif

. endif		. endif
		rakucoUnsubmitted Done Inline Actions Can you add a bigger description of why we do this? rakuco: Can you add a bigger description of why we do this?

. if defined(WANT_QT_DEBUG) \|\| defined(WITH_DEBUG)		. if defined(WANT_QT_DEBUG) \|\| defined(WITH_DEBUG)
WITH_DEBUG= yes		WITH_DEBUG= yes
STRIP= # It's done prior to bsd.qt.mk inclusion.		STRIP= # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+=-debug -separate-debug-info		CONFIGURE_ARGS+=-debug -separate-debug-info
# Override configuration in global qconfig.pri.		# Override configuration in global qconfig.pri.
QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \		QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \
QT_CONFIG-="release"		QT_CONFIG-="release"
Show All 9 Lines
CONFIGURE_ARGS+=-verbose		CONFIGURE_ARGS+=-verbose
. endif		. endif

. if ${QT_DIST} == "base" \|\| ${_QT_VERSION:M4*}		. if ${QT_DIST} == "base" \|\| ${_QT_VERSION:M4*}
. if ${_QT_VERSION:M4*}		. if ${_QT_VERSION:M4*}
_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \		_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool
. else		. else
_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src_corelib_global_qcompilerdetection.h \		_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf
. endif		. endif
EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \		EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \
${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}		${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}
. endif		. endif

# Override settings installed in qconfig.h and *.pri files. The flags will be		# Override settings installed in qconfig.h and *.pri files. The flags will be
Show All 15 Lines
. endif		. endif
. if ${QT_CONFIG:N-*}		. if ${QT_CONFIG:N-*}
QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"		QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif		. endif
. if ${QT_CONFIG:M-*}		. if ${QT_CONFIG:M-*}
QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"		QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif		. endif

		# Add a RUN_DEPENDS on misc/qtchooser to select the binaries.
		# The binaries of both supported Qt versions are installed to
		# ${LOCALBASE}/lib/qt[45]/bin. The port misc/qtchooser installs
		# wrapper binaries into ${LOCALBASE}/bin, and chooses the correct
		# one depending on the value of QT_SELECT (which we pass to both
		# CONFIGURE_ENV and MAKE_ENV). Therefore make all QT_DIST ports
		# RUN_DEPEND on it.
		RUN_DEPENDS+= qtchooser:misc/qtchooser

PLIST_SUB+= SHORTVER=${DISTVERSION:R} \		PLIST_SUB+= SHORTVER=${DISTVERSION:R} \
FULLVER=${DISTVERSION:C/-.*//}		FULLVER=${DISTVERSION:C/-.*//}
.endif # defined(QT_DIST)		.endif # defined(QT_DIST)

.if ${_QT_VERSION:M4*}
QT_BINDIR_REL?= bin
QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_PLUGINDIR_REL?= ${QT_LIBDIR_REL}/plugins
QT_IMPORTDIR_REL?= ${QT_LIBDIR_REL}/imports
.endif

# A wrapper (qtchooser) is used to invoke binaries.		# A wrapper (qtchooser) is used to invoke binaries.
QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin		QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin
QT_INCDIR_REL?= include/${_QT_RELNAME}		QT_INCDIR_REL?= include/${_QT_RELNAME}
QT_LIBDIR_REL?= lib		QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_ARCHDIR_REL?=${QT_LIBDIR_REL}/${_QT_RELNAME}		QT_ARCHDIR_REL?=${QT_LIBDIR_REL}
QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins		QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins
QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}		QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}
QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports		QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports
QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml		QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml
QT_DATADIR_REL?=share/${_QT_RELNAME}		QT_DATADIR_REL?=share/${_QT_RELNAME}
QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}		QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}
QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations		QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations
QT_ETCDIR_REL?= etc/xdg		QT_ETCDIR_REL?= etc/xdg
QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}		QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}
QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests		QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests
		QT_CMAKEDIR_REL?= lib/cmake
		QT_QTCHOOSERDIR_REL?= ${QT_ETCDIR_REL}/qtchooser

# Not customizable.		# Not customizable.
.if ${_QT_VERSION:M4*}		.if ${_QT_VERSION:M4*}
QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs		QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs

_QT_LIBVER= # empty		_QT_LIBVER= # empty
_QT_BINSUFX= -${_QT_RELNAME}
.else		.else
QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs		QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs

_QT_LIBVER= ${_QT_VERSION:R:R}		_QT_LIBVER= ${_QT_VERSION:R:R}
_QT_BINSUFX= # empty
.endif		.endif

LRELEASE?= ${QT_BINDIR}/lrelease${_QT_BINSUFX}		LRELEASE?= ${QT_BINDIR}/lrelease
LUPDATE?= ${QT_BINDIR}/lupdate${_QT_BINSUFX}		LUPDATE?= ${QT_BINDIR}/lupdate
MOC?= ${QT_BINDIR}/moc${_QT_BINSUFX}		MOC?= ${QT_BINDIR}/moc
RCC?= ${QT_BINDIR}/rcc		RCC?= ${QT_BINDIR}/rcc
UIC?= ${QT_BINDIR}/uic${_QT_BINSUFX}		UIC?= ${QT_BINDIR}/uic
QMAKE?= ${QT_BINDIR}/qmake${_QT_BINSUFX}		QMAKE?= ${QT_BINDIR}/qmake
# Needed to redefine the qmake target for internal Qt configuration.		# Needed to redefine the qmake target for internal Qt configuration.
		matUnsubmitted Not Done Inline Actions If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not QT_BINDIR. (If they are the ones in PREFIX/some-qt-directory then it's ok.) mat: If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not…
		tcbernerAuthorUnsubmitted Not Done Inline Actions These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` . tcberner: These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` .
_QMAKE?= ${QMAKE}		_QMAKE?= ${QMAKE}
QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}		QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}

# The whole Qt distribution should be built with the same compiler, but it's		# The whole Qt distribution should be built with the same compiler, but it's
# better to support custom settings. Dereferencing the detection allows to		# better to support custom settings. Dereferencing the detection allows to
# avoid forking a shell on each inclusion of this file, and to catch any CXX		# avoid forking a shell on each inclusion of this file, and to catch any CXX
# customization (via USE_GCC, etc.).		# customization (via USE_GCC, etc.).
QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in clang) echo clang ;; *) echo g++ ;; esac)		QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in clang) echo clang ;; *) echo g++ ;; esac)

# Import QMAKE_ENV and QMAKE_ARGS definitions.		# Import QMAKE_ENV and QMAKE_ARGS definitions.
USES+= qmake:_env		USES+= qmake:_env

.for dir in INC ARCH PLUGIN LIBEXEC IMPORT \		.for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \
QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC		QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC \
		CMAKE QTCHOOSER
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}		QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
		# Export all directories to the plist substituion for QT_DIST ports.
		rakucoUnsubmitted Done Inline Actions Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space before "QT_DIST". Additionally, the comment is basically describing what we can see below, it'd be more helpful if it explained why instead. rakuco: Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space…
		# For the others, exclude QT_CMAKEDIR and QT_ETCDIR.
		. if (${dir:NCMAKE} && ${dir:NETC}) \|\| defined(QT_DIST)
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"		PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
.endfor

.for dir in BIN LIB
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
. if defined(QT_DIST)
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
. endif		. endif
.endfor		.endfor

		# Pass the chosen Qt version to the environment for qtchooser
		rakucoUnsubmitted Done Inline Actions Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences with a period. rakuco: Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences…
		CONFIGURE_ENV+= QT_SELECT=${_QT_RELNAME}
		MAKE_ENV+= QT_SELECT=${_QT_RELNAME}

.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)		.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)		.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)

Qt_Post_Include= bsd.qt.mk		Qt_Post_Include= bsd.qt.mk

.if !defined(QT_NONSTANDARD)		.if !defined(QT_NONSTANDARD)
CONFIGURE_ENV+= QTDIR="${PREFIX}" QMAKE="${QMAKE}" \		CONFIGURE_ENV+= QTDIR="${QT_ARCHDIR}" QMAKE="${QMAKE}" \
MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \		MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \
QMAKESPEC="${QMAKESPEC}"		QMAKESPEC="${QMAKESPEC}"
CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \		CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \
--with-qt-libraries=${QT_LIBDIR} \		--with-qt-libraries=${QT_LIBDIR} \
--with-extra-includes=${LOCALBASE}/include \		--with-extra-includes=${LOCALBASE}/include \
--with-extra-libs=${LOCALBASE}/lib		--with-extra-libs=${LOCALBASE}/lib
.endif # !defined(QT_NONSTANDARD)		.endif # !defined(QT_NONSTANDARD)

_USE_QT_ALL= assistant dbus declarative designer doc gui help \		_USE_QT_ALL= assistant dbus declarative designer doc gui help \
imageformats l10n linguist linguisttools multimedia \		imageformats l10n linguist linguisttools multimedia \
network opengl pixeltool qdbusviewer qmake script \		network opengl pixeltool qdbusviewer qmake script \
scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \		scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \
sql-sqlite2 sql-sqlite3 svg testlib webkit \		sql-sqlite2 sql-sqlite3 svg testlib webkit \
xml xmlpatterns		xml xmlpatterns

_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \		_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \
codecs-kr codecs-tw corelib demo graphicssystems-opengl \		codecs-kr codecs-tw corelib demo graphicssystems-opengl \
help-tools iconengines inputmethods makeqpf moc phonon \		help-tools iconengines inputmethods makeqpf moc phonon \
phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \		phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \
qtestlib qvfb rcc uic uic3 xmlpatterns-tool		qtestlib qvfb rcc uic uic3 xmlpatterns-tool

_USE_QT5_ONLY= 3d buildtools canvas3d concurrent connectivity core \		_USE_QT5_ONLY= 3d buildtools canvas3d charts concurrent connectivity \
examples graphicaleffects location paths phonon4 \		core datavis3d declarative-render2d examples gamepad \
printsupport qdbus qdoc qdoc-data qev qml quick quickcontrols \		graphicaleffects location paths phonon4 printsupport \
quickcontrols2 sensors serialbus serialport sql-tds \		qdbus qdoc qdoc-data qev qml quick quickcontrols \
uiplugin uitools webchannel websockets widgets x11extras		quickcontrols2 scxml sensors serialbus serialport \
		sql-tds uiplugin uitools virtualkeyboard webchannel \
		websockets widgets x11extras

3d_PORT= graphics/${_QT_RELNAME}-3d		3d_PORT= graphics/${_QT_RELNAME}-3d
		rakucoUnsubmitted Not Done Inline Actions Style: "# Components", not "#Components". rakuco: Style: "# Components", not "#Components".
3d_LIB= libQt${_QT_LIBVER}3DCore.so		3d_LIB= libQt${_QT_LIBVER}3DCore.so

accessible_PORT= accessibility/${_QT_RELNAME}-accessible		accessible_PORT= accessibility/${_QT_RELNAME}-accessible
accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so		accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so

assistant_PORT= devel/${_QT_RELNAME}-assistant		assistant_PORT= devel/${_QT_RELNAME}-assistant
assistant_PATH= ${QT_BINDIR}/assistant${_QT_BINSUFX}		assistant_PATH= ${QT_BINDIR}/assistant

assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp		assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp
assistant-adp_PATH= ${QT_BINDIR}/assistant_adp		assistant-adp_PATH= ${QT_BINDIR}/assistant_adp

assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient		assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient
assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so		assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so

buildtools_PORT= devel/${_QT_RELNAME}-buildtools		buildtools_PORT= devel/${_QT_RELNAME}-buildtools
buildtools_PATH= ${MOC}		buildtools_PATH= ${MOC}

canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d		canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d
canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir		canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir

clucene_PORT= textproc/clucene-${_QT_RELNAME}		charts_PORT= x11-toolkits/${_QT_RELNAME}-charts
		charts_LIB= libQt${_QT_LIBVER}Charts.so

		clucene_PORT= textproc/${_QT_RELNAME}-clucene
clucene_LIB= libQt${_QT_LIBVER}CLucene.so		clucene_LIB= libQt${_QT_LIBVER}CLucene.so

codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn		codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn
codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so		codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so

codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp		codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp
codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so		codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so

Show All 10 Lines
connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so		connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so

core_PORT= devel/${_QT_RELNAME}-core		core_PORT= devel/${_QT_RELNAME}-core
core_LIB= libQt${_QT_LIBVER}Core.so		core_LIB= libQt${_QT_LIBVER}Core.so

corelib_PORT= devel/${_QT_RELNAME}-corelib		corelib_PORT= devel/${_QT_RELNAME}-corelib
corelib_LIB= ${core_LIB}		corelib_LIB= ${core_LIB}

dbus_PORT= devel/dbus-${_QT_RELNAME}		datavis3d_PORT= x11-toolkits/${_QT_RELNAME}-datavis3d
		datavis3d_LIB= libQt${_QT_LIBVER}DataVisualization.so

		dbus_PORT= devel/${_QT_RELNAME}-dbus
dbus_LIB= libQt${_QT_LIBVER}DBus.so		dbus_LIB= libQt${_QT_LIBVER}DBus.so

declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative		declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative
declarative_LIB= libQt${_QT_LIBVER}Declarative.so		declarative_LIB= libQt${_QT_LIBVER}Declarative.so

		declarative-render2d_PORT= x11-toolkits/${_QT_RELNAME}-declarative-render2d
		declarative-render2d_PATH= ${QT_PLUGINDIR}/scenegraph/libsoftwarecontext.so

demo_PORT= misc/${_QT_RELNAME}-qtdemo		demo_PORT= misc/${_QT_RELNAME}-qtdemo
demo_PATH= ${QT_BINDIR}/qtdemo		demo_PATH= ${QT_BINDIR}/qtdemo

designer_PORT= devel/${_QT_RELNAME}-designer		designer_PORT= devel/${_QT_RELNAME}-designer
designer_PATH= ${QT_BINDIR}/designer${_QT_BINSUFX}		designer_PATH= ${QT_BINDIR}/designer

doc_PORT= misc/${_QT_RELNAME}-doc		doc_PORT= misc/${_QT_RELNAME}-doc
doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}		doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}

examples_PORT= misc/${_QT_RELNAME}-examples		examples_PORT= misc/${_QT_RELNAME}-examples
examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}		examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}

		gamepad_PORT= x11-toolkits/${_QT_RELNAME}-gamepad
		gamepad_LIB= libQt${_QT_LIBVER}Gamepad.so

graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects		graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects
graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir		graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir

graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl		graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl
graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so		graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so

gui_PORT= x11-toolkits/${_QT_RELNAME}-gui		gui_PORT= x11-toolkits/${_QT_RELNAME}-gui
gui_LIB= libQt${_QT_LIBVER}Gui.so		gui_LIB= libQt${_QT_LIBVER}Gui.so
Show All 9 Lines

imageformats_PORT= graphics/${_QT_RELNAME}-imageformats		imageformats_PORT= graphics/${_QT_RELNAME}-imageformats
imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so		imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so

inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods		inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods
inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so		inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so

linguist_PORT= devel/${_QT_RELNAME}-linguist		linguist_PORT= devel/${_QT_RELNAME}-linguist
linguist_PATH= ${QT_BINDIR}/linguist${_QT_BINSUFX}		linguist_PATH= ${QT_BINDIR}/linguist

linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools		linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools
linguisttools_PATH= ${LRELEASE}		linguisttools_PATH= ${LRELEASE}

location_PORT= devel/${_QT_RELNAME}-location		location_PORT= devel/${_QT_RELNAME}-location
location_LIB= libQt${_QT_LIBVER}Location.so		location_LIB= libQt${_QT_LIBVER}Location.so

l10n_PORT= misc/${_QT_RELNAME}-l10n		l10n_PORT= misc/${_QT_RELNAME}-l10n
l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}		l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}

makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf		makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf
makeqpf_PATH= ${QT_BINDIR}/makeqpf${_QT_BINSUFX}		makeqpf_PATH= ${QT_BINDIR}/makeqpf

moc_PORT= devel/${_QT_RELNAME}-moc		moc_PORT= devel/${_QT_RELNAME}-moc
moc_PATH= ${MOC}		moc_PATH= ${MOC}

multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia		multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia
multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so		multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so

network_PORT= net/${_QT_RELNAME}-network		network_PORT= net/${_QT_RELNAME}-network
Show All 36 Lines
qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf		qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf

qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3		qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3
qdoc3_PATH= ${QT_BINDIR}/qdoc3		qdoc3_PATH= ${QT_BINDIR}/qdoc3

qev_PORT= x11/${_QT_RELNAME}-qev		qev_PORT= x11/${_QT_RELNAME}-qev
qev_PATH= ${QT_BINDIR}/qev		qev_PATH= ${QT_BINDIR}/qev

qmake_PORT= devel/qmake${_QT_VERSION:R:R}		qmake_PORT= devel/${_QT_RELNAME}-qmake
qmake_PATH= ${QMAKE}		qmake_PATH= ${QMAKE}

qml_PORT= lang/${_QT_RELNAME}-qml		qml_PORT= lang/${_QT_RELNAME}-qml
qml_LIB= libQt${_QT_LIBVER}Qml.so		qml_LIB= libQt${_QT_LIBVER}Qml.so

qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer		qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer
qmlviewer_PATH= ${QT_BINDIR}/qmlviewer		qmlviewer_PATH= ${QT_BINDIR}/qmlviewer

qt3support_PORT= devel/${_QT_RELNAME}-qt3support		qt3support_PORT= devel/${_QT_RELNAME}-qt3support
qt3support_LIB= libQt${_QT_LIBVER}3Support.so		qt3support_LIB= libQt${_QT_LIBVER}3Support.so

qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig		qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig
qtconfig_PATH= ${QT_BINDIR}/qtconfig${_QT_BINSUFX}		qtconfig_PATH= ${QT_BINDIR}/qtconfig

qtestlib_PORT= ${testlib_PORT}		qtestlib_PORT= ${testlib_PORT}
qtestlib_LIB= ${testlib_LIB}		qtestlib_LIB= ${testlib_LIB}

quick_PORT= x11-toolkits/${_QT_RELNAME}-quick		quick_PORT= x11-toolkits/${_QT_RELNAME}-quick
quick_LIB= libQt${_QT_LIBVER}Quick.so		quick_LIB= libQt${_QT_LIBVER}Quick.so

quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols		quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols
quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir		quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir

quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2		quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2
quickcontrols2_LIB= libQt${_QT_LIBVER}LabsTemplates.so		quickcontrols2_LIB= libQt${_QT_LIBVER}QuickControls2.so

qvfb_PORT= devel/${_QT_RELNAME}-qvfb		qvfb_PORT= devel/${_QT_RELNAME}-qvfb
qvfb_PATH= ${QT_BINDIR}/qvfb${_QT_BINSUFX}		qvfb_PATH= ${QT_BINDIR}/qvfb

rcc_PORT= devel/${_QT_RELNAME}-rcc		rcc_PORT= devel/${_QT_RELNAME}-rcc
rcc_PATH= ${RCC}		rcc_PATH= ${RCC}

sensors_PORT= comms/${_QT_RELNAME}-sensors		sensors_PORT= comms/${_QT_RELNAME}-sensors
sensors_LIB= libQt${_QT_LIBVER}Sensors.so		sensors_LIB= libQt${_QT_LIBVER}Sensors.so

script_PORT= devel/${_QT_RELNAME}-script		script_PORT= devel/${_QT_RELNAME}-script
script_LIB= libQt${_QT_LIBVER}Script.so		script_LIB= libQt${_QT_LIBVER}Script.so

scripttools_PORT= devel/${_QT_RELNAME}-scripttools		scripttools_PORT= devel/${_QT_RELNAME}-scripttools
scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so		scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so

		scxml_PORT= devel/${_QT_RELNAME}-scxml
		scxml_LIB= libQt${_QT_LIBVER}Scxml.so

serialbus_PORT= comms/${_QT_RELNAME}-serialbus		serialbus_PORT= comms/${_QT_RELNAME}-serialbus
serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so		serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so

serialport_PORT= comms/${_QT_RELNAME}-serialport		serialport_PORT= comms/${_QT_RELNAME}-serialport
serialport_LIB= libQt${_QT_LIBVER}SerialPort.so		serialport_LIB= libQt${_QT_LIBVER}SerialPort.so

sql_PORT= databases/${_QT_RELNAME}-sql		sql_PORT= databases/${_QT_RELNAME}-sql
sql_LIB= libQt${_QT_LIBVER}Sql.so		sql_LIB= libQt${_QT_LIBVER}Sql.so
Show All 28 Lines
uic3_PATH= ${QT_BINDIR}/uic3		uic3_PATH= ${QT_BINDIR}/uic3

uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin		uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin
uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin		uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin

uitools_PORT= devel/${_QT_RELNAME}-uitools		uitools_PORT= devel/${_QT_RELNAME}-uitools
uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a		uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a

		virtualkeyboard_PORT= x11-toolkits/${_QT_RELNAME}-virtualkeyboard
		virtualkeyboard_PATH= ${QT_PLUGINDIR}/platforminputcontexts/libqtvirtualkeyboardplugin.so

webchannel_PORT= www/${_QT_RELNAME}-webchannel		webchannel_PORT= www/${_QT_RELNAME}-webchannel
webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so		webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so

websockets_PORT= www/${_QT_RELNAME}-websockets		websockets_PORT= www/${_QT_RELNAME}-websockets
websockets_LIB= libQt${_QT_LIBVER}WebSockets.so		websockets_LIB= libQt${_QT_LIBVER}WebSockets.so

webkit_PORT= www/webkit-${_QT_RELNAME}		webkit_PORT= www/${_QT_RELNAME}-webkit
webkit_LIB= libQt${_QT_LIBVER}WebKit.so		webkit_LIB= libQt${_QT_LIBVER}WebKit.so

widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets		widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets
widgets_LIB= libQt${_QT_LIBVER}Widgets.so		widgets_LIB= libQt${_QT_LIBVER}Widgets.so

x11extras_PORT= x11/${_QT_RELNAME}-x11extras		x11extras_PORT= x11/${_QT_RELNAME}-x11extras
x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so		x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so

▲ Show 20 Lines • Show All 62 Lines • ▼ Show 20 Lines
. endif		. endif
. if ${PORTNAME} != "dbus"		. if ${PORTNAME} != "dbus"
_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp		_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp
. endif		. endif
. if ${PORTNAME} != "widgets"		. if ${PORTNAME} != "widgets"
_QT_TOOLS+= ${UIC}		_QT_TOOLS+= ${UIC}
. endif		. endif

		# The list of QtBase components that need to be linked into WRKSRC/lib for
		# other QtBase ports. See below.
		_QT5_BASE= core dbus gui network sql widgets

pre-configure: qtbase-pre-configure		pre-configure: qtbase-pre-configure
qtbase-pre-configure:		qtbase-pre-configure:
. for tool in ${_QT_TOOLS}		. for tool in ${_QT_TOOLS}
		tcbernerAuthorUnsubmitted Not Done Inline Actions I've been thinking of dropping this here, and defining _LINK components for these, and handling them like the other base dependencies in lines 680-688. (This would probably require some modifications to switch between ${QT_LIBDIR}/${comp_lib} resp ${QT_BINDIR}/${comp_bin} or something). But maybe it would be a nice simplification... tcberner: I've been thinking of dropping this here, and defining _LINK components for these, and handling…
@${TEST} -e ${QT_BINDIR}/${tool:T} && \		@${TEST} -e ${QT_BINDIR}/${tool:T} && \
${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} \|\| \		${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} \|\| \
${TRUE}		${TRUE}
. endfor		. endfor

		# The following is a fix for the inplace upgrade problem we faced (see
		# QTBUG-40825 and ports bugs 194088, 195105 and 198720) previously,
		# which previously was adressed by making sure, that ${LOCALBASE}/lib, which
		# would often gets added by pkgconf for the dependencies, was passed after
		# ${WRKSRC}/lib.
		# * We fix the inplace upgrade problem by moving the Qt5 libraries into
		# ${LOCALBASE}/lib/qt5. Therefore a -L${LOCALBASE}/lib does no harm anymore.
		# * However, this means, that the ports belonging to the split up QtBase package
		# now no longer can find their depending QtBase libraries. We fix this by
		# linking these into ${CONFIGURE_WRKSRC}/lib if the given QtBase port depends
		# on them.
		. if ${QT_DIST:Mbase}
		. for basedep in ${_QT5_BASE}
		. if ${USE_QT5:M${basedep}}
		${LN} -sf ${QT_LIBDIR}/${${basedep}_LIB} ${CONFIGURE_WRKSRC}/lib
		. endif
		. endfor
		. endif

		#
		# ** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **
		#
# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out		# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out
# certain paths from pkg-config calls (see the explanation in		# certain paths from pkg-config calls (see the explanation in
# devel/qt5/files/patch-configure) as well as for setting		# devel/qt5/files/patch-configure) as well as for setting
# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for		# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for
# ports/194088.		# ports/194088.
post-patch: qtbase-post-patch		post-patch: qtbase-post-patch
qtbase-post-patch:		qtbase-post-patch:
		rakucoUnsubmitted Done Inline Actions I think this can moved before the "Add ${LOCALBASE}/lib" block. rakuco: I think this can moved before the "Add ${LOCALBASE}/lib" block.
${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \		${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \
${WRKSRC}/configure		${WRKSRC}/configure

. if ${PORTNAME} != "qmake"		. if ${PORTNAME} != "qmake"
_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake		_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake

post-configure: qmake-configure		post-configure: qmake-configure
. endif		. endif
. endif # ${QT_DIST} == "base"		. endif # ${QT_DIST} == "base"

pre-configure: qt5-pre-configure		pre-configure: qt5-pre-configure
qt5-pre-configure:		qt5-pre-configure:
# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that		# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that
# requires tests/auto/cmake to be present, otherwise the configure stage will		# requires tests/auto/cmake to be present, otherwise the configure stage will
# fail.		# fail.
# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same		# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same
# time, we have to disable the check in a cache file (the only way to get this		# time, we have to disable the check in a cache file (the only way to get this
# value through to the configure script in qtbase).		# value through to the configure script in qtbase).
${MKDIR} ${CONFIGURE_WRKSRC}		${MKDIR} ${CONFIGURE_WRKSRC}
${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache		${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache
		#
		# ** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **
		#
# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to		# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to
# the linker before -L/usr/local/lib. By default, the opposite happens, which		# the linker before -L/usr/local/lib. By default, the opposite happens, which
# is a problem when a Qt port is being upgraded, since an existing library		# is a problem when a Qt port is being upgraded, since an existing library
# would end up being picked up instead of those built in ${WRKSRC}/lib. Since		# would end up being picked up instead of those built in ${WRKSRC}/lib. Since
# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the		# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the
# latter to get the linker path order right. qmake is smart enough to strip		# latter to get the linker path order right. qmake is smart enough to strip
# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.		# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.
# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.		# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.
▲ Show 20 Lines • Show All 41 Lines • Show Last 20 Lines

View Options

head/libexec/rtld-elf/powerpc64/rtld_machdep.h

Show All 21 Lines
.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)		.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

Qt_Include_MAINTAINER= kde@FreeBSD.org		Qt_Include_MAINTAINER= kde@FreeBSD.org
Qt_Pre_Include= bsd.qt.mk		Qt_Pre_Include= bsd.qt.mk

# Qt versions currently supported by the framework.		# Qt versions currently supported by the framework.
_QT_SUPPORTED?= 4 5		_QT_SUPPORTED?= 4 5
QT4_VERSION?= 4.8.7		QT4_VERSION?= 4.8.7
QT5_VERSION?= 5.6.2		QT5_VERSION?= 5.7.1

_QT_RELNAME= qt${_QT_VERSION:R:R}		_QT_RELNAME= qt${_QT_VERSION:R:R}
_QT_VERSION= # empty		_QT_VERSION= # empty
.for ver in ${_QT_SUPPORTED}		.for ver in ${_QT_SUPPORTED}
. if defined(USE_QT${ver})		. if defined(USE_QT${ver})
. if empty(_QT_VERSION)		. if empty(_QT_VERSION)
_QT_VERSION= ${QT${ver}_VERSION}		_QT_VERSION= ${QT${ver}_VERSION}
. else		. else
# Reject different USE_QT*.		# Reject different USE_QT*.
IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'		IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
. endif		. endif
. endif		. endif
.endfor		.endfor

.if empty(_QT_VERSION)		.if empty(_QT_VERSION)
# The file was included without USE_QT*.		# The file was included without USE_QT*.
IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'		IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
.endif		.endif

.if defined(QT_DIST)		.if defined(QT_DIST)
QT_NONSTANDARD= yes		QT_NONSTANDARD= yes

MASTER_SITES= ${MASTER_SITE_QT}		MASTER_SITES= ${MASTER_SITE_QT}
# Useless, as it must be defined before including bsd.port.pre.mk (at least
# because of bsd.options.mk).
#PKGNAMEPREFIX?= ${_QT_RELNAME}-
DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo		DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo

LICENSE?= LGPL21		LICENSE?= LGPL21

. if !exists(${PKGDIR}/pkg-descr)		. if !exists(${PKGDIR}/pkg-descr)
DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr		DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr
. endif		. endif

Show All 21 Lines
# better not to fix what is not explicitly broken there.		# better not to fix what is not explicitly broken there.
LDFLAGS+= -Wl,--as-needed		LDFLAGS+= -Wl,--as-needed

. if ${.TARGETS:Mmakesum} \|\| ${.TARGETS:Mfetch} && \		. if ${.TARGETS:Mmakesum} \|\| ${.TARGETS:Mfetch} && \
defined(DISABLE_SIZE) && defined(NO_CHECKSUM)		defined(DISABLE_SIZE) && defined(NO_CHECKSUM)
# Ensure that the "makesum" target (with its inner "fetch" one) uses		# Ensure that the "makesum" target (with its inner "fetch" one) uses
# devel/qt*/distinfo for every port.		# devel/qt*/distinfo for every port.
. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}		. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}
QT_DIST= 3d base canvas3d connectivity declarative graphicaleffects imageformats \		QT_DIST= 3d base canvas3d charts connectivity datavis3d declarative \
location multimedia quickcontrols quickcontrols2 script sensors serialbus serialport svg tools \		declarative-render2d gamepad graphicaleffects imageformats \
translations webchannel websockets x11extras xmlpatterns		location multimedia quickcontrols quickcontrols2 script scxml \
		sensors serialbus serialport svg tools translations \
		virtualkeyboard webchannel webkit websockets x11extras \
		xmlpatterns
. endif		. endif
		matUnsubmitted Done Inline Actions i think there is a level of indentation missing here in all but the first line. mat: i think there is a level of indentation missing here in all but the first line.
		matUnsubmitted Not Done Inline Actions These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4. mat: These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4.
. endif		. endif

. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"		. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies.		# Qt configure requires pkg-config to detect dependencies.
USES+= pkgconfig		USES+= pkgconfig

# Set QMAKESPEC when building qtbase so that qmake (called by the configure		# Set QMAKESPEC when building qtbase so that qmake (called by the configure
# script) can find the mkspecs we create ourselves in devel/qmake5.		# script) can find the mkspecs we create ourselves in devel/qmake5.
Show All 36 Lines	CONFIGURE_ARGS+=-nomake examples -nomake tests \
-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \		-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \		-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
-qmldir ${PREFIX}/${QT_QMLDIR_REL} \		-qmldir ${PREFIX}/${QT_QMLDIR_REL} \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \		-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
-testsdir ${PREFIX}/${QT_TESTDIR_REL}		-testsdir ${PREFIX}/${QT_TESTDIR_REL}
. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)		. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)
CONFIGURE_ARGS+=-no-sse2		CONFIGURE_ARGS+=-no-sse2
. endif		. endif

. endif		. endif
		rakucoUnsubmitted Done Inline Actions Can you add a bigger description of why we do this? rakuco: Can you add a bigger description of why we do this?

. if defined(WANT_QT_DEBUG) \|\| defined(WITH_DEBUG)		. if defined(WANT_QT_DEBUG) \|\| defined(WITH_DEBUG)
WITH_DEBUG= yes		WITH_DEBUG= yes
STRIP= # It's done prior to bsd.qt.mk inclusion.		STRIP= # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+=-debug -separate-debug-info		CONFIGURE_ARGS+=-debug -separate-debug-info
# Override configuration in global qconfig.pri.		# Override configuration in global qconfig.pri.
QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \		QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \
QT_CONFIG-="release"		QT_CONFIG-="release"
Show All 9 Lines
CONFIGURE_ARGS+=-verbose		CONFIGURE_ARGS+=-verbose
. endif		. endif

. if ${QT_DIST} == "base" \|\| ${_QT_VERSION:M4*}		. if ${QT_DIST} == "base" \|\| ${_QT_VERSION:M4*}
. if ${_QT_VERSION:M4*}		. if ${_QT_VERSION:M4*}
_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \		_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool
. else		. else
_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src_corelib_global_qcompilerdetection.h \		_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf
. endif		. endif
EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \		EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \		${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \
${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}		${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}
. endif		. endif

# Override settings installed in qconfig.h and *.pri files. The flags will be		# Override settings installed in qconfig.h and *.pri files. The flags will be
Show All 15 Lines
. endif		. endif
. if ${QT_CONFIG:N-*}		. if ${QT_CONFIG:N-*}
QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"		QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif		. endif
. if ${QT_CONFIG:M-*}		. if ${QT_CONFIG:M-*}
QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"		QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif		. endif

		# Add a RUN_DEPENDS on misc/qtchooser to select the binaries.
		# The binaries of both supported Qt versions are installed to
		# ${LOCALBASE}/lib/qt[45]/bin. The port misc/qtchooser installs
		# wrapper binaries into ${LOCALBASE}/bin, and chooses the correct
		# one depending on the value of QT_SELECT (which we pass to both
		# CONFIGURE_ENV and MAKE_ENV). Therefore make all QT_DIST ports
		# RUN_DEPEND on it.
		RUN_DEPENDS+= qtchooser:misc/qtchooser

PLIST_SUB+= SHORTVER=${DISTVERSION:R} \		PLIST_SUB+= SHORTVER=${DISTVERSION:R} \
FULLVER=${DISTVERSION:C/-.*//}		FULLVER=${DISTVERSION:C/-.*//}
.endif # defined(QT_DIST)		.endif # defined(QT_DIST)

.if ${_QT_VERSION:M4*}
QT_BINDIR_REL?= bin
QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_PLUGINDIR_REL?= ${QT_LIBDIR_REL}/plugins
QT_IMPORTDIR_REL?= ${QT_LIBDIR_REL}/imports
.endif

# A wrapper (qtchooser) is used to invoke binaries.		# A wrapper (qtchooser) is used to invoke binaries.
QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin		QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin
QT_INCDIR_REL?= include/${_QT_RELNAME}		QT_INCDIR_REL?= include/${_QT_RELNAME}
QT_LIBDIR_REL?= lib		QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_ARCHDIR_REL?=${QT_LIBDIR_REL}/${_QT_RELNAME}		QT_ARCHDIR_REL?=${QT_LIBDIR_REL}
QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins		QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins
QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}		QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}
QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports		QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports
QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml		QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml
QT_DATADIR_REL?=share/${_QT_RELNAME}		QT_DATADIR_REL?=share/${_QT_RELNAME}
QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}		QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}
QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations		QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations
QT_ETCDIR_REL?= etc/xdg		QT_ETCDIR_REL?= etc/xdg
QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}		QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}
QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests		QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests
		QT_CMAKEDIR_REL?= lib/cmake
		QT_QTCHOOSERDIR_REL?= ${QT_ETCDIR_REL}/qtchooser

# Not customizable.		# Not customizable.
.if ${_QT_VERSION:M4*}		.if ${_QT_VERSION:M4*}
QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs		QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs

_QT_LIBVER= # empty		_QT_LIBVER= # empty
_QT_BINSUFX= -${_QT_RELNAME}
.else		.else
QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs		QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs

_QT_LIBVER= ${_QT_VERSION:R:R}		_QT_LIBVER= ${_QT_VERSION:R:R}
_QT_BINSUFX= # empty
.endif		.endif

LRELEASE?= ${QT_BINDIR}/lrelease${_QT_BINSUFX}		LRELEASE?= ${QT_BINDIR}/lrelease
LUPDATE?= ${QT_BINDIR}/lupdate${_QT_BINSUFX}		LUPDATE?= ${QT_BINDIR}/lupdate
MOC?= ${QT_BINDIR}/moc${_QT_BINSUFX}		MOC?= ${QT_BINDIR}/moc
RCC?= ${QT_BINDIR}/rcc		RCC?= ${QT_BINDIR}/rcc
UIC?= ${QT_BINDIR}/uic${_QT_BINSUFX}		UIC?= ${QT_BINDIR}/uic
QMAKE?= ${QT_BINDIR}/qmake${_QT_BINSUFX}		QMAKE?= ${QT_BINDIR}/qmake
# Needed to redefine the qmake target for internal Qt configuration.		# Needed to redefine the qmake target for internal Qt configuration.
		matUnsubmitted Not Done Inline Actions If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not QT_BINDIR. (If they are the ones in PREFIX/some-qt-directory then it's ok.) mat: If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not…
		tcbernerAuthorUnsubmitted Not Done Inline Actions These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` . tcberner: These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` .
_QMAKE?= ${QMAKE}		_QMAKE?= ${QMAKE}
QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}		QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}

# The whole Qt distribution should be built with the same compiler, but it's		# The whole Qt distribution should be built with the same compiler, but it's
# better to support custom settings. Dereferencing the detection allows to		# better to support custom settings. Dereferencing the detection allows to
# avoid forking a shell on each inclusion of this file, and to catch any CXX		# avoid forking a shell on each inclusion of this file, and to catch any CXX
# customization (via USE_GCC, etc.).		# customization (via USE_GCC, etc.).
QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in clang) echo clang ;; *) echo g++ ;; esac)		QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in clang) echo clang ;; *) echo g++ ;; esac)

# Import QMAKE_ENV and QMAKE_ARGS definitions.		# Import QMAKE_ENV and QMAKE_ARGS definitions.
USES+= qmake:_env		USES+= qmake:_env

.for dir in INC ARCH PLUGIN LIBEXEC IMPORT \		.for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \
QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC		QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC \
		CMAKE QTCHOOSER
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}		QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
		# Export all directories to the plist substituion for QT_DIST ports.
		rakucoUnsubmitted Done Inline Actions Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space before "QT_DIST". Additionally, the comment is basically describing what we can see below, it'd be more helpful if it explained why instead. rakuco: Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space…
		# For the others, exclude QT_CMAKEDIR and QT_ETCDIR.
		. if (${dir:NCMAKE} && ${dir:NETC}) \|\| defined(QT_DIST)
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"		PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
.endfor

.for dir in BIN LIB
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
. if defined(QT_DIST)
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
. endif		. endif
.endfor		.endfor

		# Pass the chosen Qt version to the environment for qtchooser
		rakucoUnsubmitted Done Inline Actions Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences with a period. rakuco: Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences…
		CONFIGURE_ENV+= QT_SELECT=${_QT_RELNAME}
		MAKE_ENV+= QT_SELECT=${_QT_RELNAME}

.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)		.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)

.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)		.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)

Qt_Post_Include= bsd.qt.mk		Qt_Post_Include= bsd.qt.mk

.if !defined(QT_NONSTANDARD)		.if !defined(QT_NONSTANDARD)
CONFIGURE_ENV+= QTDIR="${PREFIX}" QMAKE="${QMAKE}" \		CONFIGURE_ENV+= QTDIR="${QT_ARCHDIR}" QMAKE="${QMAKE}" \
MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \		MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \
QMAKESPEC="${QMAKESPEC}"		QMAKESPEC="${QMAKESPEC}"
CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \		CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \
--with-qt-libraries=${QT_LIBDIR} \		--with-qt-libraries=${QT_LIBDIR} \
--with-extra-includes=${LOCALBASE}/include \		--with-extra-includes=${LOCALBASE}/include \
--with-extra-libs=${LOCALBASE}/lib		--with-extra-libs=${LOCALBASE}/lib
.endif # !defined(QT_NONSTANDARD)		.endif # !defined(QT_NONSTANDARD)

_USE_QT_ALL= assistant dbus declarative designer doc gui help \		_USE_QT_ALL= assistant dbus declarative designer doc gui help \
imageformats l10n linguist linguisttools multimedia \		imageformats l10n linguist linguisttools multimedia \
network opengl pixeltool qdbusviewer qmake script \		network opengl pixeltool qdbusviewer qmake script \
scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \		scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \
sql-sqlite2 sql-sqlite3 svg testlib webkit \		sql-sqlite2 sql-sqlite3 svg testlib webkit \
xml xmlpatterns		xml xmlpatterns

_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \		_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \
codecs-kr codecs-tw corelib demo graphicssystems-opengl \		codecs-kr codecs-tw corelib demo graphicssystems-opengl \
help-tools iconengines inputmethods makeqpf moc phonon \		help-tools iconengines inputmethods makeqpf moc phonon \
phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \		phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \
qtestlib qvfb rcc uic uic3 xmlpatterns-tool		qtestlib qvfb rcc uic uic3 xmlpatterns-tool

_USE_QT5_ONLY= 3d buildtools canvas3d concurrent connectivity core \		_USE_QT5_ONLY= 3d buildtools canvas3d charts concurrent connectivity \
examples graphicaleffects location paths phonon4 \		core datavis3d declarative-render2d examples gamepad \
printsupport qdbus qdoc qdoc-data qev qml quick quickcontrols \		graphicaleffects location paths phonon4 printsupport \
quickcontrols2 sensors serialbus serialport sql-tds \		qdbus qdoc qdoc-data qev qml quick quickcontrols \
uiplugin uitools webchannel websockets widgets x11extras		quickcontrols2 scxml sensors serialbus serialport \
		sql-tds uiplugin uitools virtualkeyboard webchannel \
		websockets widgets x11extras

3d_PORT= graphics/${_QT_RELNAME}-3d		3d_PORT= graphics/${_QT_RELNAME}-3d
		rakucoUnsubmitted Not Done Inline Actions Style: "# Components", not "#Components". rakuco: Style: "# Components", not "#Components".
3d_LIB= libQt${_QT_LIBVER}3DCore.so		3d_LIB= libQt${_QT_LIBVER}3DCore.so

accessible_PORT= accessibility/${_QT_RELNAME}-accessible		accessible_PORT= accessibility/${_QT_RELNAME}-accessible
accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so		accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so

assistant_PORT= devel/${_QT_RELNAME}-assistant		assistant_PORT= devel/${_QT_RELNAME}-assistant
assistant_PATH= ${QT_BINDIR}/assistant${_QT_BINSUFX}		assistant_PATH= ${QT_BINDIR}/assistant

assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp		assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp
assistant-adp_PATH= ${QT_BINDIR}/assistant_adp		assistant-adp_PATH= ${QT_BINDIR}/assistant_adp

assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient		assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient
assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so		assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so

buildtools_PORT= devel/${_QT_RELNAME}-buildtools		buildtools_PORT= devel/${_QT_RELNAME}-buildtools
buildtools_PATH= ${MOC}		buildtools_PATH= ${MOC}

canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d		canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d
canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir		canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir

clucene_PORT= textproc/clucene-${_QT_RELNAME}		charts_PORT= x11-toolkits/${_QT_RELNAME}-charts
		charts_LIB= libQt${_QT_LIBVER}Charts.so

		clucene_PORT= textproc/${_QT_RELNAME}-clucene
clucene_LIB= libQt${_QT_LIBVER}CLucene.so		clucene_LIB= libQt${_QT_LIBVER}CLucene.so

codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn		codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn
codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so		codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so

codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp		codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp
codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so		codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so

Show All 10 Lines
connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so		connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so

core_PORT= devel/${_QT_RELNAME}-core		core_PORT= devel/${_QT_RELNAME}-core
core_LIB= libQt${_QT_LIBVER}Core.so		core_LIB= libQt${_QT_LIBVER}Core.so

corelib_PORT= devel/${_QT_RELNAME}-corelib		corelib_PORT= devel/${_QT_RELNAME}-corelib
corelib_LIB= ${core_LIB}		corelib_LIB= ${core_LIB}

dbus_PORT= devel/dbus-${_QT_RELNAME}		datavis3d_PORT= x11-toolkits/${_QT_RELNAME}-datavis3d
		datavis3d_LIB= libQt${_QT_LIBVER}DataVisualization.so

		dbus_PORT= devel/${_QT_RELNAME}-dbus
dbus_LIB= libQt${_QT_LIBVER}DBus.so		dbus_LIB= libQt${_QT_LIBVER}DBus.so

declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative		declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative
declarative_LIB= libQt${_QT_LIBVER}Declarative.so		declarative_LIB= libQt${_QT_LIBVER}Declarative.so

		declarative-render2d_PORT= x11-toolkits/${_QT_RELNAME}-declarative-render2d
		declarative-render2d_PATH= ${QT_PLUGINDIR}/scenegraph/libsoftwarecontext.so

demo_PORT= misc/${_QT_RELNAME}-qtdemo		demo_PORT= misc/${_QT_RELNAME}-qtdemo
demo_PATH= ${QT_BINDIR}/qtdemo		demo_PATH= ${QT_BINDIR}/qtdemo

designer_PORT= devel/${_QT_RELNAME}-designer		designer_PORT= devel/${_QT_RELNAME}-designer
designer_PATH= ${QT_BINDIR}/designer${_QT_BINSUFX}		designer_PATH= ${QT_BINDIR}/designer

doc_PORT= misc/${_QT_RELNAME}-doc		doc_PORT= misc/${_QT_RELNAME}-doc
doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}		doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}

examples_PORT= misc/${_QT_RELNAME}-examples		examples_PORT= misc/${_QT_RELNAME}-examples
examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}		examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}

		gamepad_PORT= x11-toolkits/${_QT_RELNAME}-gamepad
		gamepad_LIB= libQt${_QT_LIBVER}Gamepad.so

graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects		graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects
graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir		graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir

graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl		graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl
graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so		graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so

gui_PORT= x11-toolkits/${_QT_RELNAME}-gui		gui_PORT= x11-toolkits/${_QT_RELNAME}-gui
gui_LIB= libQt${_QT_LIBVER}Gui.so		gui_LIB= libQt${_QT_LIBVER}Gui.so
Show All 9 Lines

imageformats_PORT= graphics/${_QT_RELNAME}-imageformats		imageformats_PORT= graphics/${_QT_RELNAME}-imageformats
imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so		imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so

inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods		inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods
inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so		inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so

linguist_PORT= devel/${_QT_RELNAME}-linguist		linguist_PORT= devel/${_QT_RELNAME}-linguist
linguist_PATH= ${QT_BINDIR}/linguist${_QT_BINSUFX}		linguist_PATH= ${QT_BINDIR}/linguist

linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools		linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools
linguisttools_PATH= ${LRELEASE}		linguisttools_PATH= ${LRELEASE}

location_PORT= devel/${_QT_RELNAME}-location		location_PORT= devel/${_QT_RELNAME}-location
location_LIB= libQt${_QT_LIBVER}Location.so		location_LIB= libQt${_QT_LIBVER}Location.so

l10n_PORT= misc/${_QT_RELNAME}-l10n		l10n_PORT= misc/${_QT_RELNAME}-l10n
l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}		l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}

makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf		makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf
makeqpf_PATH= ${QT_BINDIR}/makeqpf${_QT_BINSUFX}		makeqpf_PATH= ${QT_BINDIR}/makeqpf

moc_PORT= devel/${_QT_RELNAME}-moc		moc_PORT= devel/${_QT_RELNAME}-moc
moc_PATH= ${MOC}		moc_PATH= ${MOC}

multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia		multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia
multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so		multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so

network_PORT= net/${_QT_RELNAME}-network		network_PORT= net/${_QT_RELNAME}-network
Show All 36 Lines
qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf		qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf

qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3		qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3
qdoc3_PATH= ${QT_BINDIR}/qdoc3		qdoc3_PATH= ${QT_BINDIR}/qdoc3

qev_PORT= x11/${_QT_RELNAME}-qev		qev_PORT= x11/${_QT_RELNAME}-qev
qev_PATH= ${QT_BINDIR}/qev		qev_PATH= ${QT_BINDIR}/qev

qmake_PORT= devel/qmake${_QT_VERSION:R:R}		qmake_PORT= devel/${_QT_RELNAME}-qmake
qmake_PATH= ${QMAKE}		qmake_PATH= ${QMAKE}

qml_PORT= lang/${_QT_RELNAME}-qml		qml_PORT= lang/${_QT_RELNAME}-qml
qml_LIB= libQt${_QT_LIBVER}Qml.so		qml_LIB= libQt${_QT_LIBVER}Qml.so

qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer		qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer
qmlviewer_PATH= ${QT_BINDIR}/qmlviewer		qmlviewer_PATH= ${QT_BINDIR}/qmlviewer

qt3support_PORT= devel/${_QT_RELNAME}-qt3support		qt3support_PORT= devel/${_QT_RELNAME}-qt3support
qt3support_LIB= libQt${_QT_LIBVER}3Support.so		qt3support_LIB= libQt${_QT_LIBVER}3Support.so

qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig		qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig
qtconfig_PATH= ${QT_BINDIR}/qtconfig${_QT_BINSUFX}		qtconfig_PATH= ${QT_BINDIR}/qtconfig

qtestlib_PORT= ${testlib_PORT}		qtestlib_PORT= ${testlib_PORT}
qtestlib_LIB= ${testlib_LIB}		qtestlib_LIB= ${testlib_LIB}

quick_PORT= x11-toolkits/${_QT_RELNAME}-quick		quick_PORT= x11-toolkits/${_QT_RELNAME}-quick
quick_LIB= libQt${_QT_LIBVER}Quick.so		quick_LIB= libQt${_QT_LIBVER}Quick.so

quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols		quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols
quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir		quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir

quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2		quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2
quickcontrols2_LIB= libQt${_QT_LIBVER}LabsTemplates.so		quickcontrols2_LIB= libQt${_QT_LIBVER}QuickControls2.so

qvfb_PORT= devel/${_QT_RELNAME}-qvfb		qvfb_PORT= devel/${_QT_RELNAME}-qvfb
qvfb_PATH= ${QT_BINDIR}/qvfb${_QT_BINSUFX}		qvfb_PATH= ${QT_BINDIR}/qvfb

rcc_PORT= devel/${_QT_RELNAME}-rcc		rcc_PORT= devel/${_QT_RELNAME}-rcc
rcc_PATH= ${RCC}		rcc_PATH= ${RCC}

sensors_PORT= comms/${_QT_RELNAME}-sensors		sensors_PORT= comms/${_QT_RELNAME}-sensors
sensors_LIB= libQt${_QT_LIBVER}Sensors.so		sensors_LIB= libQt${_QT_LIBVER}Sensors.so

script_PORT= devel/${_QT_RELNAME}-script		script_PORT= devel/${_QT_RELNAME}-script
script_LIB= libQt${_QT_LIBVER}Script.so		script_LIB= libQt${_QT_LIBVER}Script.so

scripttools_PORT= devel/${_QT_RELNAME}-scripttools		scripttools_PORT= devel/${_QT_RELNAME}-scripttools
scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so		scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so

		scxml_PORT= devel/${_QT_RELNAME}-scxml
		scxml_LIB= libQt${_QT_LIBVER}Scxml.so

serialbus_PORT= comms/${_QT_RELNAME}-serialbus		serialbus_PORT= comms/${_QT_RELNAME}-serialbus
serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so		serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so

serialport_PORT= comms/${_QT_RELNAME}-serialport		serialport_PORT= comms/${_QT_RELNAME}-serialport
serialport_LIB= libQt${_QT_LIBVER}SerialPort.so		serialport_LIB= libQt${_QT_LIBVER}SerialPort.so

sql_PORT= databases/${_QT_RELNAME}-sql		sql_PORT= databases/${_QT_RELNAME}-sql
sql_LIB= libQt${_QT_LIBVER}Sql.so		sql_LIB= libQt${_QT_LIBVER}Sql.so
Show All 28 Lines
uic3_PATH= ${QT_BINDIR}/uic3		uic3_PATH= ${QT_BINDIR}/uic3

uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin		uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin
uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin		uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin

uitools_PORT= devel/${_QT_RELNAME}-uitools		uitools_PORT= devel/${_QT_RELNAME}-uitools
uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a		uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a

		virtualkeyboard_PORT= x11-toolkits/${_QT_RELNAME}-virtualkeyboard
		virtualkeyboard_PATH= ${QT_PLUGINDIR}/platforminputcontexts/libqtvirtualkeyboardplugin.so

webchannel_PORT= www/${_QT_RELNAME}-webchannel		webchannel_PORT= www/${_QT_RELNAME}-webchannel
webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so		webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so

websockets_PORT= www/${_QT_RELNAME}-websockets		websockets_PORT= www/${_QT_RELNAME}-websockets
websockets_LIB= libQt${_QT_LIBVER}WebSockets.so		websockets_LIB= libQt${_QT_LIBVER}WebSockets.so

webkit_PORT= www/webkit-${_QT_RELNAME}		webkit_PORT= www/${_QT_RELNAME}-webkit
webkit_LIB= libQt${_QT_LIBVER}WebKit.so		webkit_LIB= libQt${_QT_LIBVER}WebKit.so

widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets		widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets
widgets_LIB= libQt${_QT_LIBVER}Widgets.so		widgets_LIB= libQt${_QT_LIBVER}Widgets.so

x11extras_PORT= x11/${_QT_RELNAME}-x11extras		x11extras_PORT= x11/${_QT_RELNAME}-x11extras
x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so		x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so

▲ Show 20 Lines • Show All 62 Lines • ▼ Show 20 Lines
. endif		. endif
. if ${PORTNAME} != "dbus"		. if ${PORTNAME} != "dbus"
_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp		_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp
. endif		. endif
. if ${PORTNAME} != "widgets"		. if ${PORTNAME} != "widgets"
_QT_TOOLS+= ${UIC}		_QT_TOOLS+= ${UIC}
. endif		. endif

		# The list of QtBase components that need to be linked into WRKSRC/lib for
		# other QtBase ports. See below.
		_QT5_BASE= core dbus gui network sql widgets

pre-configure: qtbase-pre-configure		pre-configure: qtbase-pre-configure
qtbase-pre-configure:		qtbase-pre-configure:
. for tool in ${_QT_TOOLS}		. for tool in ${_QT_TOOLS}
		tcbernerAuthorUnsubmitted Not Done Inline Actions I've been thinking of dropping this here, and defining _LINK components for these, and handling them like the other base dependencies in lines 680-688. (This would probably require some modifications to switch between ${QT_LIBDIR}/${comp_lib} resp ${QT_BINDIR}/${comp_bin} or something). But maybe it would be a nice simplification... tcberner: I've been thinking of dropping this here, and defining _LINK components for these, and handling…
@${TEST} -e ${QT_BINDIR}/${tool:T} && \		@${TEST} -e ${QT_BINDIR}/${tool:T} && \
${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} \|\| \		${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} \|\| \
${TRUE}		${TRUE}
. endfor		. endfor

		# The following is a fix for the inplace upgrade problem we faced (see
		# QTBUG-40825 and ports bugs 194088, 195105 and 198720) previously,
		# which previously was adressed by making sure, that ${LOCALBASE}/lib, which
		# would often gets added by pkgconf for the dependencies, was passed after
		# ${WRKSRC}/lib.
		# * We fix the inplace upgrade problem by moving the Qt5 libraries into
		# ${LOCALBASE}/lib/qt5. Therefore a -L${LOCALBASE}/lib does no harm anymore.
		# * However, this means, that the ports belonging to the split up QtBase package
		# now no longer can find their depending QtBase libraries. We fix this by
		# linking these into ${CONFIGURE_WRKSRC}/lib if the given QtBase port depends
		# on them.
		. if ${QT_DIST:Mbase}
		. for basedep in ${_QT5_BASE}
		. if ${USE_QT5:M${basedep}}
		${LN} -sf ${QT_LIBDIR}/${${basedep}_LIB} ${CONFIGURE_WRKSRC}/lib
		. endif
		. endfor
		. endif

		#
		# ** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **
		#
# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out		# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out
# certain paths from pkg-config calls (see the explanation in		# certain paths from pkg-config calls (see the explanation in
# devel/qt5/files/patch-configure) as well as for setting		# devel/qt5/files/patch-configure) as well as for setting
# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for		# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for
# ports/194088.		# ports/194088.
post-patch: qtbase-post-patch		post-patch: qtbase-post-patch
qtbase-post-patch:		qtbase-post-patch:
		rakucoUnsubmitted Done Inline Actions I think this can moved before the "Add ${LOCALBASE}/lib" block. rakuco: I think this can moved before the "Add ${LOCALBASE}/lib" block.
${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \		${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \
${WRKSRC}/configure		${WRKSRC}/configure

. if ${PORTNAME} != "qmake"		. if ${PORTNAME} != "qmake"
_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake		_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake

post-configure: qmake-configure		post-configure: qmake-configure
. endif		. endif
. endif # ${QT_DIST} == "base"		. endif # ${QT_DIST} == "base"

pre-configure: qt5-pre-configure		pre-configure: qt5-pre-configure
qt5-pre-configure:		qt5-pre-configure:
# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that		# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that
# requires tests/auto/cmake to be present, otherwise the configure stage will		# requires tests/auto/cmake to be present, otherwise the configure stage will
# fail.		# fail.
# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same		# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same
# time, we have to disable the check in a cache file (the only way to get this		# time, we have to disable the check in a cache file (the only way to get this
# value through to the configure script in qtbase).		# value through to the configure script in qtbase).
${MKDIR} ${CONFIGURE_WRKSRC}		${MKDIR} ${CONFIGURE_WRKSRC}
${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache		${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache
		#
		# ** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **
		#
# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to		# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to
# the linker before -L/usr/local/lib. By default, the opposite happens, which		# the linker before -L/usr/local/lib. By default, the opposite happens, which
# is a problem when a Qt port is being upgraded, since an existing library		# is a problem when a Qt port is being upgraded, since an existing library
# would end up being picked up instead of those built in ${WRKSRC}/lib. Since		# would end up being picked up instead of those built in ${WRKSRC}/lib. Since
# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the		# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the
# latter to get the linker path order right. qmake is smart enough to strip		# latter to get the linker path order right. qmake is smart enough to strip
# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.		# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.
# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.		# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.
▲ Show 20 Lines • Show All 41 Lines • Show Last 20 Lines

View Options

head/libexec/rtld-elf/riscv/rtld_machdep.h

rtld: fix warnings about redundant declarationsClosedPublicActions

Details

Diff Detail

Event Timeline

Revision ContentsChangeset List

Diff 28862

head/libexec/rtld-elf/arm/rtld_machdep.h

head/libexec/rtld-elf/mips/rtld_machdep.h

head/libexec/rtld-elf/powerpc/rtld_machdep.h

head/libexec/rtld-elf/powerpc64/rtld_machdep.h

head/libexec/rtld-elf/riscv/rtld_machdep.h

rtld: fix warnings about redundant declarations
ClosedPublic
Actions

Revision Contents
Changeset List