Page MenuHomeFreeBSD
Paste P48

(An Untitled Masterwork)
ActivePublic
Actions

Authored by br on Jan 19 2015, 5:17 PM.
Tags
None
Referenced Files
F72118: file
Jan 19 2015, 5:17 PM
Subscribers
None
root@:~ # ./run_both.sh
dev.rstmgr.0.fpga2hps: 1 -> 0
dev.rstmgr.0.lwhps2fpga: 1 -> 0
dev.rstmgr.0.hps2fpga: 1 -> 0
13685+1 records in
13685+1 records out
7007184 bytes transferred in 1.057459 secs (6626435 bytes/sec)
dev.rstmgr.0.fpga2hps: 0 -> 1
dev.rstmgr.0.lwhps2fpga: 0 -> 1
dev.rstmgr.0.hps2fpga: 0 -> 1
filesize 26738688 bytes
result: 0
Writing 6132239 bytes at 0x00100000
Set $13 to 0000000000000000
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #98 r277385M: Mon Jan 19 16:48:39 UTC 2015
rb743@vica.cl.cam.ac.uk:/home/rb743/obj/mips.mips64/home/rb743/dev/head/sys/BERI_SOCKIT mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0xffffffff8060e600.
real memory = 1055916032 (1031168K bytes)
Physical memory chunk(s):
0x00731000 - 0x0f96bfff, 253997056 bytes (62011 pages)
avail memory = 252276736 (240MB)
random device not loaded/active; using insecure pseudo-random number generator
ULE: setup cpu 0
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
crypto: <crypto core>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
mem: <memory>
null: <full device, null device, zero device>
nfslock: pseudo-device
openfirm: <Open Firmware control device>
nexus0: <MIPS32 root nexus>
ofwbus0: <Open Firmware Device Tree> on nexus0
ofwbus0: <cpus> type unknown (no driver attached)
simplebus0: <Flattened device tree simple bus (BERI version)> on ofwbus0
beripic0: <BERI Programmable Interrupt Controller> mem 0x7f804000-0x7f8043ff,0x7f806000-0x7f80600f,0x7f806080-0x7f80608f,0x7f806100-0x7f80610f irq 0,1,2,3,4 on simplebus0
beripic0: config region at mem 0x7f804000-0x7f804400
beripic0: IP read region at mem 0x7f806000-0x7f806010
beripic0: IP set region at mem 0x7f806080-0x7f806090
beripic0: IP clear region at mem 0x7f806100-0x7f806110
simplebus0: no default resources for rid = 5, type = 1
beripic0: 64 hard and 64 soft sources
beripic0: initial config: src 0: enabled tid: 0 hardintr 0
beripic0: initial config: src 1: enabled tid: 0 hardintr 1
beripic0: initial config: src 2: enabled tid: 0 hardintr 2
beripic0: initial config: src 3: enabled tid: 0 hardintr 3
beripic0: initial config: src 4: enabled tid: 0 hardintr 4
altera_pio0: <Altera PIO> mem 0x7f020000-0x7f020fff irq 4 (beripic0) on simplebus0
altera_pio1: <Altera PIO> mem 0x7f021000-0x7f021fff irq 10 (beripic0) on simplebus0
altera_pio2: <Altera PIO> mem 0x7f022000-0x7f022fff irq 5 (beripic0) on simplebus0
altera_pio3: <Altera PIO> mem 0x7f023000-0x7f023fff irq 11 (beripic0) on simplebus0
virtio_mmio_platform0: <Virtio MMIO platform> on simplebus0
virtio_mmio_platform1: <Virtio MMIO platform> on simplebus0
virtio_mmio0: <VirtIO MMIO adapter> mem 0x200001000-0x200001fff on simplebus0
vtblk0: <VirtIO Block Adapter> on virtio_mmio0
virtio_mmio0: host features: 0x10000044 <RingIndirect,BlockSize,MaxNumSegs>
virtio_mmio0: negotiated features: 0x10000044 <RingIndirect,BlockSize,MaxNumSegs>
vtblk0: 25MB (52224 512 byte sectors)
virtio_mmio1: <VirtIO MMIO adapter> mem 0x200002000-0x200002fff on simplebus0
altera_jtag_uart0: <Altera JTAG UART> mem 0x7f000000-0x7f00003f irq 0 (beripic0) on simplebus0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 100000000 Hz quality 800
Event timer "MIPS32" frequency 100000000 Hz quality 800
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
Device configuration finished.
Timecounters tick every 5.000 msec
crypto: <crypto device>
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 4096
random: unblocking device.
GEOM: new disk vtbd0
MAP: No valid partition found at vtbd0
Trying to mount root from ufs:vtbd0 []...
WARNING: / was not properly dismounted
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
mips_unaligned_load_store: unhandled opcode in address error: 0x38
ALIGNMENT_FIX_ERR: pid 14 tid 100026 (sh), uid 0: pc 0x1600467c8 got a read fault (type 0x4) at 0x160059000
Trapframe Register Dump:
zero: 0 at: 0x160069000 v0: 0 v1: 0x1
a0: 0x1 a1: 0x1600683d0 a2: 0x7fffffe478 a3: 0
a4: 0x16005c180 a5: 0 a6: 0x1e a6: 0xeb0
t0: 0 t1: 0 t2: 0 t3: 0x16006e930
t8: 0 t9: 0x16004ade0 s0: 0x160059000 s1: 0x7fffffe5a8
s2: 0x16003fa60 s3: 0x1600664e0 s4: 0x800000000000 s5: 0x16003dfe0
s6: 0x1600664e8 s7: 0x7fffffede8 k0: 0 k1: 0
gp: 0x16006e930 sp: 0x7fffffe478 s8: 0x7fffffedc0 ra: 0x1600467b0
sr: 0x8cf3 mullo: 0x80be mulhi: 0x8c badvaddr: 0x160059000
cause: 0x110 pc: 0x1600467c8
Page table info for pc address 0x1600467c8: pde = 0x9800000000b75000, pte = 0x28000000003399a
Dumping 4 words starting at pc address 0x1600467c8:
e2040000 1080fffa 00000000 10000002
Page table info for bad address 0x160059000: pde = 0x9800000000b75000, pte = 0x2000000000343de
pid 14 (sh), uid 0: exited on signal 10
Nov 4 23:42:56 init: /bin/sh on /etc/rc terminated abnormally, going to single user mode
Enter full pathname of shell or RETURN for /bin/sh:

Event Timeline

br edited the content of this paste. (Show Details)Jan 19 2015, 5:17 PM
br updated the paste's language from autodetect to autodetect.