MFC r341381-r341383, r341385, r343950, r344527, r344576-r344580, r344585, r344589-r344590, r344623, r344626-r344627
r341381:
arm64: rockchip: Add RK3399_CLK_PLL
PLLs on the RK3399 are different than the ones on the RK3328.
Add a new type and some dedicated recalc and set_freq functions.
Rename the RK3328 dedicated rk_clk_pll function with rk3328_ prefix.
r341382:
arm64/rockchip: add RK3399 support
Add CRU (Clock and Reset Unit) driver for RK3399.
Add support in rk_pinctrl driver.
Submitted by: Greg V <greg@unrelenting.technology> (Original version)
Differential Revision: https://reviews.freebsd.org/D16732
r341383:
arm64: rockchip: rk_i2c: Use correct clock
While here add RK3399 support and call clk_set_assigned to set the correct
clock set in the DTS.
r341385:
arm64: rockchip: rk805: Add basic support for RK808 PMIC
RK808 PMIC is the companion chip for RK3399 SoC.
Add basic regulator support in RK805 since they are similar.
r343950:
arm64: Fix compile when removing SOC_ROCKCHIP_* options
Make every rockchip file depend on the multiple soc_rockchip options
While here make rk_i2c and rk_gpio depend on their device options.
Reported by: sbruno
r344527:
arm64: rockchip: clk: Set the write mask when setting the clock mux
RockChip clocks have a write mask in the upper 16bits of the mux register
which wasn't set in the set_mux function.
Also the wrong parent was tested instead of the real current one, when
switch parent, test with the current one before.
Pointy Hat: manu
r344576:
arm64: rockchip: clk: rk_clk_composite: Properly use the mask bits
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here add some debug printf useful for debuging clock problems
r344577:
arm64: rockchip: clk: ARM CLK improvement
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here set the parent after changing its freqeuncy, this reduce the time
between changing the parent and changing the divider for the arm clock.
r344578:
arm64: rockchip: rk3328_pll: Multiple improvement
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here, when switching PLL frequency, first switch it to slow mode.
When set to slow mode the PLL clock will be the external oscillator.
Changing the PLL parameters while its output is used can cause hang (sometimes).
r344579:
arm64: rockchip: rk805: Add LDO regulators
Add the 3 LDO regulator found in the RK805 Power Management IC.
r344580:
arm64: rockchip: rk805: Map the regulator
No map function was provided before so every regulator lookup resolved
the regulator with id 1, as it uses the default mapper, which is wrong.
Correctly map the regulators.
While here remove some debug printfs and make them disable by default.
r344585:
arm64: rockchip: rk_pinctrl: Fix two banks in RK3328
The last two banks don't have 3 bits for the pin function but only 2.
This fixes eMMC on the Rock64.
r344589:
arm64: rockchip: rk3399_pll: Switch to slow mode when changing the freq
Like r344578 but for RK3399.
This solve some hangs when switching between frequency.
r344590:
arm64: rockchip: rk3399_pll: Fix copy paste
RK3399 PLLs don't have mode_reg, use the correct register.
r344623:
arm64: rockchip: clk_pll: Multiple improvement
Remove the mode_val from the clock definition as it's a bit unreadable.
Use mode_shift to represent which bit control the mode in the register.
Simplify some case where we can avoid a register read before changing it.
Set the PLL back to normal mode after the PLL have stabilized.
Discussed with: mmel
r344626:
arm64: rockchip: rk3399_clk: Add sd clock definitions
r344627:
mmc: dwmmc: Match on "rockchip,rk3288-dw-mshc" compatible
This is the common denominator for rockchip compatible from RK3288 to RK3399.
The other compatible are generally present in the DTS but the controllers
are the same.