Page MenuHomeFreeBSD
Paste P423

if_axp
ActivePublic

Authored by manu on Sep 11 2020, 7:28 AM.
Tags
None
Referenced Files
F8757517: if_axp
Sep 11 2020, 7:28 AM
Subscribers
None
root@test-epyc:~ # kldload if_axp && sleep 1 && kldunload if_axp
ax0: <AMD 10 Gigabit Ethernet Driver> mem 0xef7e0000-0xef7fffff,0xef7c0000-0xef7dffff,0xef80e000-0xef80ffff irq 40 at device 0.4 on pci6
ax0: Using 512 TX descriptors and 512 RX descriptors
ax0: Using 4 RX queues 4 TX queues
ax0: Using MSI-X interrupts with 8 vectors
ax0: xgbe_phy_reset: no phydev
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax1: <AMD 10 Gigabit Ethernet Driver> mem 0xef7a0000-0xef7bffff,0xef780000-0xef79ffff,0xef80c000-0xef80dfff irq 41 at device 0.5 on pci6
ax1: axgbe_if_attach_pre: Device ID: 0x1458
ax1: xpcs window def : 0x00009060
ax1: xpcs window sel : 0x00009064
ax1: xpcs window : 0x0000b000
ax1: xpcs window size : 0x00001000
ax1: xpcs window mask : 0x00000fff
ax1: port property 0 = 0x15800801
ax1: port property 1 = 0x10100c10
ax1: port property 2 = 0x000e000e
ax1: port property 3 = 0x2980a100
ax1: port property 4 = 0x00801c13
ax1: max tx/rx channel count = 16/16
ax1: max tx/rx hw queue count = 16/12
ax1: xgbe_get_all_hw_features: Tx fifo 0x40000 Rx fifo 0x40000
ax1: ncpu 4 intrcpu 4
ax1: TX/RX max channel count = 16/16
ax1: TX/RX max queue count = 16/12
ax1: TX/RX DMA ring count = 4/4
ax1: TX/RX hardware queue count = 4/12
ax1: max tx/rx max fifo size = 229376/229376
ax1: axgbe_alloc_channels: txqs 4/4 rxqs 12/4
ax1: Channel count set to: 4
ax1: Using 512 TX descriptors and 512 RX descriptors
ax1: Using 4 RX queues 4 TX queues
ax0: axgbe_if_update_admin_status: phy_link -1 speed 1
ax1: Using MSI-X interrupts with 8 vectors
ax0: axgbe_if_update_admin_status: phy_link -1 speed 1
ax1: axgbe_if_tx_queues_alloc: txqsets 4/4 txqs 1
ax0: axgbe_if_update_admin_status: phy_link -1 speed 1
ax1: allocated for 4 tx queues
ax1: axgbe_if_rx_queues_alloc: rxqsets 4/4 rxqs 2
ax1: allocated for 4 rx queues
ax1: axgbe_if_msix_intr_assign: msix 8 txqsets 4 rxqsets 4
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_if_msix_intr_assign: channel count 4 idx 0 irq 5 [323/2765]
ax1: axgbe_if_msix_intr_assign: channel count 4 idx 1 irq 6
ax1: axgbe_if_msix_intr_assign: channel count 4 idx 2 irq 7
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_if_msix_intr_assign: channel count 4 idx 3 irq 8
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_if_attach_post: tx fifo 0x38000 rx fifo 0x38000
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: adjusted TX 4/4 RX 4/12
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: Channel count set to: 4
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: xgbe_i2c_disable: final i2c_disable 0
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: xgbe_i2c_get_features: I2C features: MAX_SPEED_MODE=2, RX_BUFFER_DEPTH=15, TX_BUFFER_DEPTH=15
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: *************** I2C Registers **************
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: IC_CON : 0000000263
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: IC_TAR : 0000000021
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: IC_HS_MADDR : 0000000000
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: IC_INTR_STAT : 0000000000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: IC_INTR_MASK : 0000000000
ax1: IC_RAW_INTR_STAT : 0000000000
ax1: IC_RX_TL : 000000000f
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: IC_TX_TL : 0000000000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: IC_ENABLE : 0000000000
ax1: IC_STATUS : 0000000006
ax1: IC_TXFLR : 0000000000
ax1: IC_RXFLR : 0000000000
ax1: IC_ENABLE_STATUS : 0000000000
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: IC_COMP_PARAM1 : 00000f0faa
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: port mode=8
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: port id=1
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: port speeds=0xb
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: conn type=1
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: mdio addr=0
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: xgbe_phy_init: redrv addr=0 redrv i/f=1
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: xgbe_phy_init: port mode 8 [268/2765]
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: SFP: mux_address=0x73
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: SFP: mux_channel=1
ax1: SFP: gpio_address=0x21
ax1: SFP: gpio_mask=0x2
ax1: SFP: gpio_rx_los=9
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: SFP: gpio_tx_fault=10
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: SFP: gpio_mod_absent=8
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: SFP: gpio_rate_select=0
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: xgbe_phy_init: start 7 mode 1 adv 0x0
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: xgbe_phy_init: start 7 mode 1 adv 0x0
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: xgbe_phy_init: conn type 1 mode 1
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: xgbe_phy_init: return success
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: xgbe_phy_perform_ratechange: Rate change done
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: phy powered off
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: xgbe_phy_reset: mode 8
ax1: xgbe_phy_reset: no phydev
ax1: axgbe_if_attach_post: rx_buf_size 1536
ax1: mtu 1500
ax1: axgbe_if_update_admin_status: phy_link -1 speed 1
ax1: axgbe_if_update_admin_status: phy_link -1 speed 1
ax1: axgbe_if_update_admin_status: phy_link -1 speed 1
ax2: <AMD 10 Gigabit Ethernet Driver> mem 0xef760000-0xef77ffff,0xef740000-0xef75ffff,0xef80a000-0xef80bfff irq 42 at device 0.6 on pci6
ax2: axgbe_if_attach_pre: Device ID: 0x1459
ax2: xpcs window def : 0x00009060
ax2: xpcs window sel : 0x00009064
ax2: xpcs window : 0x0000b000
ax2: xpcs window size : 0x00001000
ax2: xpcs window mask : 0x00000fff
ax2: port property 0 = 0x15800802
ax2: port property 1 = 0x02020202
ax2: port property 2 = 0x00040004
ax2: port property 3 = 0x25406100
ax2: port property 4 = 0x00801c23
ax2: max tx/rx channel count = 2/2
ax2: max tx/rx hw queue count = 2/2
ax2: xgbe_get_all_hw_features: Tx fifo 0x10000 Rx fifo 0x10000
ax2: ncpu 4 intrcpu 4
ax2: TX/RX max channel count = 2/2
ax2: TX/RX max queue count = 2/2
ax2: TX/RX DMA ring count = 2/2
ax2: TX/RX hardware queue count = 2/2
ax2: max tx/rx max fifo size = 65536/65536 [213/2765]
ax2: axgbe_alloc_channels: txqs 2/2 rxqs 2/2
ax2: Channel count set to: 2
ax2: Using 512 TX descriptors and 512 RX descriptors
ax2: Using 2 RX queues 2 TX queues
ax1: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_if_update_admin_status: phy_link -1 speed 1
ax2: Using MSI-X interrupts with 6 vectors
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax2: axgbe_if_tx_queues_alloc: txqsets 2/2 txqs 1
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax2: allocated for 2 tx queues
ax2: axgbe_if_rx_queues_alloc: rxqsets 2/2 rxqs 2
ax2: allocated for 2 rx queues
ax2: axgbe_if_msix_intr_assign: msix 6 txqsets 2 rxqsets 2
ax2: axgbe_dev_isr DMA ISR: 0x20000
ax2: axgbe_dev_isr MAC ISR: 0x2000001
ax2: axgbe_if_msix_intr_assign: channel count 2 idx 0 irq 5
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax2: axgbe_if_msix_intr_assign: channel count 2 idx 1 irq 6
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax2: axgbe_if_attach_post: tx fifo 0x10000 rx fifo 0x10000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax2: adjusted TX 2/2 RX 2/2
ax2: axgbe_dev_isr DMA ISR: 0x20000
ax2: Channel count set to: 2
ax2: axgbe_dev_isr MAC ISR: 0x2000001
ax2: xgbe_i2c_disable: final i2c_disable 0
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax2: xgbe_i2c_get_features: I2C features: MAX_SPEED_MODE=2, RX_BUFFER_DEPTH=15, TX_BUFFER_DEPTH=15
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax2: *************** I2C Registers **************
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax2: IC_CON : 0000000263
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax2: IC_TAR : 0000000021
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax2: IC_HS_MADDR : 0000000000
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax2: IC_INTR_STAT : 0000000000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax2: IC_INTR_MASK : 0000000000
ax2: IC_RAW_INTR_STAT : 0000000000
ax2: IC_RX_TL : 000000000f
ax2: IC_TX_TL : 0000000000
ax2: IC_ENABLE : 0000000000
ax2: IC_STATUS : 0000000006
ax2: IC_TXFLR : 0000000000
ax2: IC_RXFLR : 0000000000
ax2: IC_ENABLE_STATUS : 0000000000
ax2: IC_COMP_PARAM1 : 00000f0faa [158/2765]
ax2: port mode=8
ax2: port id=2
ax2: port speeds=0xb
ax2: conn type=1
ax2: mdio addr=0
ax2: xgbe_phy_init: redrv addr=0 redrv i/f=1
ax2: xgbe_phy_init: port mode 8
ax2: SFP: mux_address=0x73
ax2: SFP: mux_channel=2
ax2: SFP: gpio_address=0x21
ax2: SFP: gpio_mask=0x2
ax2: SFP: gpio_rx_los=5
ax2: SFP: gpio_tx_fault=6
ax2: SFP: gpio_mod_absent=4
ax2: SFP: gpio_rate_select=0
ax2: xgbe_phy_init: start 7 mode 1 adv 0x0
ax2: xgbe_phy_init: start 7 mode 1 adv 0x0
ax2: xgbe_phy_init: conn type 1 mode 1
ax2: xgbe_phy_init: return success
ax2: xgbe_phy_perform_ratechange: Rate change done
ax2: phy powered off
ax2: xgbe_phy_reset: mode 8
ax2: xgbe_phy_reset: no phydev
ax2: axgbe_if_attach_post: rx_buf_size 1536
ax2: mtu 1500
ax2: axgbe_if_update_admin_status: phy_link -1 speed 1
ax2: axgbe_if_update_admin_status: phy_link -1 speed 1
ax2: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax3: <AMD 10 Gigabit Ethernet Driver>ax0: axgbe_dev_isr MAC ISR: 0x2000001
mem 0xef720000-ax0: axgbe_dev_isr DMA ISR: 0x20000
0xef73ffffax0: axgbe_dev_isr MAC ISR: 0x2000001
,0xef700000-0xef71ffff,0xef808000-0xef809fff irq 43 at device 0.7 on pci6
ax3: axgbe_if_attach_pre: Device ID: 0x1459
ax3: xpcs window def : 0x00009060
ax3: xpcs window sel : 0x00009064
ax3: xpcs window : 0x0000b000
ax3: xpcs window size : 0x00001000
ax3: xpcs window mask : 0x00000fff
ax3: port property 0 = 0x15800803
ax3: port property 1 = 0x02020202
ax3: port property 2 = 0x00040004
ax3: port property 3 = 0x21002100 [103/2765]
ax3: port property 4 = 0x00801c33
ax3: max tx/rx channel count = 2/2
ax3: max tx/rx hw queue count = 2/2
ax3: xgbe_get_all_hw_features: Tx fifo 0x10000 Rx fifo 0x10000
ax3: ncpu 4 intrcpu 4
ax3: TX/RX max channel count = 2/2
ax3: TX/RX max queue count = 2/2
ax3: TX/RX DMA ring count = 2/2
ax3: TX/RX hardware queue count = 2/2
ax3: max tx/rx max fifo size = 65536/65536
ax3: axgbe_alloc_channels: txqs 2/2 rxqs 2/2
ax3: Channel count set to: 2
ax3: Using 512 TX descriptors and 512 RX descriptors
ax3: Using 2 RX queues 2 TX queues
ax3: Using MSI-X interrupts with 6 vectors
ax3: axgbe_if_tx_queues_alloc: txqsets 2/2 txqs 1
ax3: allocated for 2 tx queues
ax3: axgbe_if_rx_queues_alloc: rxqsets 2/2 rxqs 2
ax3: allocated for 2 rx queues
ax3: axgbe_if_msix_intr_assign: msix 6 txqsets 2 rxqsets 2
ax3: axgbe_if_msix_intr_assign: channel count 2 idx 0 irq 5
ax3: axgbe_if_msix_intr_assign: channel count 2 idx 1 irq 6
ax3: axgbe_dev_isr DMA ISR: 0x20000
ax3: axgbe_if_attach_post: tx fifo 0x10000 rx fifo 0x10000
ax3: axgbe_dev_isr MAC ISR: 0x2000001
ax3: adjusted TX 2/2 RX 2/2
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax3: Channel count set to: 2
ax3: axgbe_dev_isr DMA ISR: 0x0
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax3: xgbe_i2c_disable: final i2c_disable 0
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax3: xgbe_i2c_get_features: I2C features: MAX_SPEED_MODE=2, RX_BUFFER_DEPTH=15, TX_BUFFER_DEPTH=15
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax3: *************** I2C Registers **************
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax3: IC_CON : 0000000263
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax3: IC_TAR : 0000000073
ax3: IC_HS_MADDR : 0000000000
ax3: IC_INTR_STAT : 0000000000
ax3: IC_INTR_MASK : 0000000000
ax3: IC_RAW_INTR_STAT : 0000000000
ax3: IC_RX_TL : 000000000f
ax3: IC_TX_TL : 0000000000
ax3: IC_ENABLE : 0000000000
ax3: IC_STATUS : 0000000006
ax3: IC_TXFLR : 0000000000
ax3: IC_RXFLR : 0000000000
ax3: IC_ENABLE_STATUS : 0000000000
ax3: IC_COMP_PARAM1 : 00000f0faa
ax3: port mode=8
ax3: port id=3
ax3: port speeds=0xb
ax3: conn type=1 [48/2765]
ax3: mdio addr=0
ax3: xgbe_phy_init: redrv addr=0 redrv i/f=1
ax3: xgbe_phy_init: port mode 8
ax3: SFP: mux_address=0x73
ax3: SFP: mux_channel=3
ax3: SFP: gpio_address=0x21
ax3: SFP: gpio_mask=0x2
ax3: SFP: gpio_rx_los=1
ax3: SFP: gpio_tx_fault=2
ax3: SFP: gpio_mod_absent=0
ax3: SFP: gpio_rate_select=0
ax3: xgbe_phy_init: start 7 mode 1 adv 0x0
ax3: xgbe_phy_init: start 7 mode 1 adv 0x0
ax3: xgbe_phy_init: conn type 1 mode 1
ax3: xgbe_phy_init: return success
ax2: axgbe_if_update_admin_status: phy_link -1 speed 1
ax3: xgbe_phy_perform_ratechange: Rate change done
ax2: axgbe_if_update_admin_status: phy_link -1 speed 1
ax3: phy powered off
ax2: axgbe_if_update_admin_status: phy_link -1 speed 1
ax3: xgbe_phy_reset: mode 8
ax3: xgbe_phy_reset: no phydev
ax3: axgbe_if_attach_post: rx_buf_size 1536
ax3: mtu 1500
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax3: axgbe_if_update_admin_status: phy_link -1 speed 1
ax3: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax3: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax3: axgbe_if_update_admin_status: phy_link -1 speed 1
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax3: axgbe_if_update_admin_status: phy_link -1 speed 1
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax3: axgbe_if_update_admin_status: phy_link -1 speed 1
ax0: axgbe_dev_isr DMA ISR: 0x20000 [3/2765]
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_dev_isr DMA ISR: 0x20000
ax0: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax1: axgbe_dev_isr DMA ISR: 0x20000
ax1: axgbe_dev_isr MAC ISR: 0x2000001
ax0: axgbe_pci_stop: Stopping when XGBE_DOWN
ax0: axgbe_interrupts_free: mode 2
ax0: axgbe_interrupts_free: rid 5
ax0: axgbe_interrupts_free: rid 6
ax0: axgbe_interrupts_free: rid 7
ax0: axgbe_interrupts_free: rid 8
ax0: detached
pci6: <network, ethernet> at device 0.4 (no driver attached)
ax1: axgbe_pci_stop: Stopping when XGBE_DOWN
ax1: axgbe_interrupts_free: mode 2
ax1: axgbe_interrupts_free: rid 5
ax1: axgbe_interrupts_free: rid 6
ax1: axgbe_interrupts_free: rid 7
ax1: axgbe_interrupts_free: rid 8
ax1: detached
pci6: <network, ethernet> at device 0.5 (no driver attached)
ax2: axgbe_pci_stop: Stopping when XGBE_DOWN
ax2: axgbe_interrupts_free: mode 2
ax2: axgbe_interrupts_free: rid 5
ax2: axgbe_interrupts_free: rid 6
ax2: detached
pci6: <network, ethernet> at device 0.6 (no driver attached)
ax3: axgbe_pci_stop: Stopping when XGBE_DOWN
ax3: axgbe_interrupts_free: mode 2
ax3: axgbe_interrupts_free: rid 5
ax3: axgbe_interrupts_free: rid 6
ax3: detached
pci6: <network, ethernet> at device 0.7 (no driver attached)

Event Timeline