Page Menu
Home
FreeBSD
Search
Configure Global Search
Log In
Files
F145749835
D4379.id.diff
No One
Temporary
Actions
View File
Edit File
Delete File
View Transforms
Subscribe
Mute Notifications
Flag For Later
Award Token
Size
5 KB
Referenced Files
None
Subscribers
None
D4379.id.diff
View Options
Index: head/sys/arm/conf/ARMADA38X
===================================================================
--- head/sys/arm/conf/ARMADA38X
+++ head/sys/arm/conf/ARMADA38X
@@ -51,6 +51,12 @@
# Network
device ether
device vlan
+device mii
+device bpf
+device re
+
+# PCI
+device pci
# Interrupt controllers
device gic
Index: head/sys/boot/fdt/dts/arm/armada-385.dtsi
===================================================================
--- head/sys/boot/fdt/dts/arm/armada-385.dtsi
+++ head/sys/boot/fdt/dts/arm/armada-385.dtsi
@@ -77,110 +77,5 @@
compatible = "marvell,mv88f6820-pinctrl";
};
};
-
- pcie-controller {
- compatible = "marvell,armada-370-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- msi-parent = <&mpic>;
- bus-range = <0x00 0xff>;
-
- ranges =
- <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
- 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
- 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
- 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
- 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
- 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
- 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
- 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
- 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
- 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */
- 0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
- 0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>;
-
- /*
- * This port can be either x4 or x1. When
- * configured in x4 by the bootloader, then
- * pcie@4,0 is not available.
- */
- pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
- 0x81000000 0 0 0x81000000 0x1 0 1 0>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 8>;
- status = "disabled";
- };
-
- /* x1 port */
- pcie@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
- 0x81000000 0 0 0x81000000 0x2 0 1 0>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- marvell,pcie-port = <1>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 5>;
- status = "disabled";
- };
-
- /* x1 port */
- pcie@3,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
- reg = <0x1800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
- 0x81000000 0 0 0x81000000 0x3 0 1 0>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- marvell,pcie-port = <2>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 6>;
- status = "disabled";
- };
-
- /*
- * x1 port only available when pcie@1,0 is
- * configured as a x1 port
- */
- pcie@4,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
- reg = <0x2000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
- 0x81000000 0 0 0x81000000 0x4 0 1 0>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- marvell,pcie-port = <3>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 7>;
- status = "disabled";
- };
- };
};
};
Index: head/sys/boot/fdt/dts/arm/armada-388-gp.dts
===================================================================
--- head/sys/boot/fdt/dts/arm/armada-388-gp.dts
+++ head/sys/boot/fdt/dts/arm/armada-388-gp.dts
@@ -226,31 +226,6 @@
};
};
- pcie-controller {
- status = "okay";
- /*
- * One PCIe units is accessible through
- * standard PCIe slot on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /*
- * The two other PCIe units are accessible
- * through mini PCIe slot on the board.
- */
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- pcie@3,0 {
- /* Port 2, Lane 0 */
- status = "okay";
- };
- };
-
gpio-fan {
compatible = "gpio-fan";
gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
@@ -259,6 +234,10 @@
};
};
+ pci0: pcie@f1080000 {
+ status = "okay";
+ };
+
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3-vbus";
Index: head/sys/boot/fdt/dts/arm/armada-38x.dtsi
===================================================================
--- head/sys/boot/fdt/dts/arm/armada-38x.dtsi
+++ head/sys/boot/fdt/dts/arm/armada-38x.dtsi
@@ -593,6 +593,25 @@
};
};
+ pci0: pcie@f1080000 {
+ compatible = "mrvl,pcie";
+ status = "disabled";
+ device_type = "pci";
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf1080000 0x2000>;
+ bus-range = <0 255>;
+ ranges = <0x42000000 0x0 0xf1200000 0xf1200000 0x0 0x00100000
+ 0x41000000 0x0 0x00000000 0xf1300000 0x0 0x00100000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 91 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+ >;
+ };
+
clocks {
/* 2 GHz fixed main PLL */
mainpll: mainpll {
File Metadata
Details
Attached
Mime Type
text/plain
Expires
Tue, Feb 24, 10:45 PM (12 h, 54 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
28980548
Default Alt Text
D4379.id.diff (5 KB)
Attached To
Mode
D4379: Change dts entry of PCIe controller for Armada38x
Attached
Detach File
Event Timeline
Log In to Comment