Diffusion FreeBSD ports repository 974c429b894b

comms/hamlib: Update to 4.5.3
974c429b894b
Actions

Description

comms/hamlib: Update to 4.5.3

Fairly lengthy changes we were quite out of date...
I did do a quick API check.

Version 4.5.3

2022-12-31
Fix serial.c for hardware flow control on Linux and MacOSy
Add QRPLabs QCX/QDX rig -- not quite a TS480
Fix QRP QRDX firmware bugs in IF message so PTT works now
FTDX5000 will now remember startup front/read settings and restore it
Fix FTDX5000 write_delay with microham
Fix grep error on MingW build

Version 4.5.2

2022-12-23
Fix PowerSDR ability to do commands while powered off
Fix TX-500 operations
Fix FTDX5000 to return to MIC input on closing
Fix rig.c calling rig_get_mode when backend does not have get_mode
Fix kenwood_ts890_get_level
Add Prosistel D elevation CBOX az to fix problem with azimuth control
Fix FT736R gpredict usage by adding cached get_freq
Fix get_powerstat problem with Log4OM/Flex and others
Fix -R option to not need argument
Fix -R option to close rig on last rigctld client disconnect
Add FTDX1200 to rigs that need to ensure PTT is off before changing frequency
Add --disable-parallel configure option for mingw builds on Linux

Version 4.5.1

2022-12-08
FT2000, FTDX3000/D, FT891, FT991, FT950, FTDX5000 now set CAT TOT to 100ms
Add missing NB2 setting to FT-950, FTDX-1200, FT-2000, FTDX-3000, FTDX-5000, FTDX-9000
Add missing meter reading to TS-890S -- thanks to Geore Baltz N3GB
Fix FT736 VFOB freq and mode set
Added send_raw to rigctl -- see rigctl man page
Fix AGC Level dumpcaps on most rigs
Fix rig_send_raw to return bytes read, fill buffer, and also work with fixed length response/null terminator
Change all Kenwood rigs to 500ms serial timeout
Fix dumpcaps filter printout to only show declared filters
Fix triggering PTT on XGComms device on Linux
Fix level_gran in all rigs
Add RIG_FUNC_TUNER to flrig.c
Fix FT-991 level_gran (needs to be done for lots of rigs)
Fix man page rigctl to show units for LEVEL items
Fix Flex6xxx if_len
Fix FLRig set_ptt
Fix missing KEYSPD to TS890
rigctl 'W' command can now use a singled char terminator like ; that allows for variable length responses with no timeout -- e.g. W FA; ;
New RIG_LEVEL_USB_AF to control audio gain from rig to computer -- to allow AGC function in software using RF and USB_AF
Add RIG_LEVEL_AGC_TIME to allow AGC/OFF to be set for IC-7300, IC-9700, IC-705
Add RIG_FUNC_OVF_STATUS to get overflow status for IC-7300, IC-9700, IC-705, and IC-R8600

Version 4.5

2022-10-30
New rotator utility https://www.pianetaradio.it/blog/catrotator/
Add FT-710
Add Rohde&Schwartz EK89X receiver
Add Xeigu X5105
Add Gemini DX-1200 HF-1K Amplifiers
Kenwood rigs should now support AI command packets
Add FT-990UNI for older 990 ROMs 1.2 and earlier
Add FT-650
Add get_separator and set_separator and -S option for rigctld -- node-red applicability
Add GRBLTRK rotor project -- two axis rotor
Add SDRPlay SDRUno rig -- can now use Data/Pkt in WSJTX
Add ability to use cat_string to FLRig via the "w" and "W" commands
Add -B/--mapa2b to rigctlcom

	  Allows rigctlcom to map set_freq on VFOA to VFOB instead
	  This will allow CW Skimmer to work with some rigs (e.g. IC7300) using FM
	  mode on VFOA and CW mode on VFOB and split mode transmit on VFOB.
	  Clicking on CW Skimmer will change VFOB instead of VFOA to allow working
	  dxpeditions where the fox is staying on frequency

Add password capability to rigctld via -A switch.

	  rigctld -A will produce a consistent shared key for any specific password that can used in \password and rig_set_password
	  TBD The shared key can also be placed in .hamlib_settings

Asynchronous rig data output handling to support transceive and spectrum data. Mikael, OH3BHX

	  Example for the IC-7300 to multicast on port 20001 and provide async rig information
	  rigctld --port=20001 --model=3073 --serial-speed=115200 --rig-file=/dev/serial/... --set-conf=rts_state=OFF --set-conf=dtr_state=OFF --multicast-addr=224.0.0.1 --multicast-port=20001 --set-conf=async=1
	  Also, spectrum data output needs to be enabled with: \set_func SPECTRUM 1

See new set_conf option async for some Icom rigs
Multicast UDP packet output for asynchronous data. Mikael, OH3BHX
Rig state poll routine to serve commonly used data like frequency and mode from cache. Mikael, OH3BHX
deprecated hamlib_port_t at front of rig_state structure -- new one at end of structure
New rig_send_raw to send/read raw command to rig
New RIG_LEVEL_BAND_SELECT for Yaesu rigs
New rig_get_conf2 to replace rig_get_conf buffer overflow potential
New rot_get_conf2 to reaplce rot_get_conf buffer overflow potential
Added Barrett 4050 -- not functional yet
Added TCI 1.X -- not functional yet
Added TM-V71(A)
Added IC-F8101
Added JRC JST-145 and JST-245
Added Xiegu X108G, G90, and X6100
Added CODAN Envoy and NGS
Added Lab599 TX-500
Added GOMSPACE GS100
Deprecated: rigctl commands \set_trn (A) and \get_trn (a) as they never worked as intended
Deprecated: field rig_caps.transceive and RIG_TRN_* macros