Page MenuHomeFreeBSD
Files F177328720

D1210.1794139526.diff
No OneTemporary
Actions

Authored By
Unknown
Size
41 KB
Referenced Files
None
Subscribers
None

D1210.1794139526.diff
View Options

Index: etc/auto_master
===================================================================
--- etc/auto_master
+++ etc/auto_master
@@ -3,3 +3,6 @@
# Automounter master map, see auto_master(5) for details.
#
/net -hosts -nobrowse,nosuid
+# When using the -media special map, make sure to uncomment
+# the call to "automount -c" in devd.conf.
+#/media -media -nosuid
Index: etc/autofs/Makefile
===================================================================
--- etc/autofs/Makefile
+++ etc/autofs/Makefile
@@ -1,6 +1,6 @@
# $FreeBSD$
-FILES= include_ldap special_hosts special_null
+FILES= include_ldap special_hosts special_media special_null
NO_OBJ=
FILESDIR= /etc/autofs
Index: etc/autofs/special_media
===================================================================
--- /dev/null
+++ etc/autofs/special_media
@@ -0,0 +1,118 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# Obtain a list of (geom-provider-name, access-count) pairs, turning this
+#
+# z0xfffff80005085d00 [shape=hexagon,label="ada0\nr2w2e3\nerr#0\nsector=512\nstripe=0"];
+#
+# Into this:
+#
+# ada0 r2w2e3
+#
+# It would be easier to use kern.geom.conftxt instead, but it lacks
+# access counts.
+pairs=$(sysctl kern.geom.confdot | grep hexagon | sed 's/.*label="\([^\]*\)\\n\([^\]*\).*/\1 \2/')
+
+# Obtain a list of GEOM providers that are not already open - not mounted,
+# and without other GEOM class, such as gpart, attached. In other words,
+# grep for "r0w0e0".
+providers=$(echo "$pairs" | awk '$2 == "r0w0e0" { print $1 }')
+
+fstype_for_geom() {
+ local _fstype _geom _type
+
+ _fstype=""
+ _geom="$1"
+
+ # XXX: Instead of file(1) we should have an utility to determine
+ # filesystem type. It should also provide a way to obtain
+ # filesystem label, to replace the glabel hack.
+ _type="`file -bs /dev/${_geom}`"
+ case "${_type}" in
+ (*FAT*) # must be before NTFS section because: newfs_msdos -O NTFS -L NTFS
+ _fstype="msdosfs"
+ ;;
+ (*ext2*)
+ _fstype="ext2fs"
+ ;;
+ (*ext3*)
+ _fstype="ext2fs"
+ ;;
+ (*Unix\ Fast\ File*)
+ _fstype="ufs"
+ ;;
+ (*ISO\ 9660*)
+ _fstype="cd9660"
+ ;;
+ esac
+
+ echo "${_fstype}"
+}
+
+label_for_geom() {
+ local _geom _label
+
+ _label=""
+ _geom="$1"
+
+ # We cannot use "glabel status $geom", because it returns
+ # first label, which might be of uninteresting kind, eg. gptid.
+ _label="`glabel status -s | awk '/gptid|ufsid/ { next }; { if($3 == "'"${_geom}"'") print $1 }'`"
+
+ # Return label, stripping the "whatever/" prefix (eg. "ufs/").
+ echo "${_label}" | sed 's!^.*/!!'
+}
+
+geom_for_label() {
+ local _label
+
+ _label="$1"
+
+ glabel status -s | awk '/gptid|ufsid/ { next }; { if($1 ~ /'"${_label}"'/) print $3 }'
+}
+
+if [ $# -eq 0 ]; then
+ # Called without any arguments; print newline-separated list
+ # of devices available for mounting.
+ for p in $providers; do
+ # Ignore providers containing slashes; we're not interested
+ # in geom_label creations.
+ case $p in
+ (*/*)
+ continue;
+ ;;
+ esac
+
+ fstype="`fstype_for_geom $p`"
+ if [ -z "$fstype" ]; then
+ # Ignore devices for which we were unable
+ # to determine filesystem type.
+ continue
+ fi
+
+ label="`label_for_geom $p`"
+ if [ -n "$label" ]; then
+ p="$label"
+ fi
+
+ echo "$p"
+ done
+
+ exit 0
+fi;
+
+key="$1"
+p="`geom_for_label $key`"
+if [ -n "$p" ]; then
+ key="$p"
+fi
+
+fstype="`fstype_for_geom $key`"
+if [ -z "$fstype" ]; then
+ # Unrecognized filesystem; don't return anything.
+ exit 0
+fi
+
+echo "-fstype=$fstype,nosuid :/dev/$key"
Index: etc/defaults/rc.conf.orig
===================================================================
--- /dev/null
+++ etc/defaults/rc.conf.orig
@@ -0,0 +1,702 @@
+#!/bin/sh
+
+# This is rc.conf - a file full of useful variables that you can set
+# to change the default startup behavior of your system. You should
+# not edit this file! Put any overrides into one of the ${rc_conf_files}
+# instead and you will be able to update these defaults later without
+# spamming your local configuration information.
+#
+# The ${rc_conf_files} files should only contain values which override
+# values set in this file. This eases the upgrade path when defaults
+# are changed and new features are added.
+#
+# All arguments must be in double or single quotes.
+#
+# For a more detailed explanation of all the rc.conf variables, please
+# refer to the rc.conf(5) manual page.
+#
+# $FreeBSD: head/etc/defaults/rc.conf 274841 2014-11-22 08:09:26Z hrs $
+
+##############################################################
+### Important initial Boot-time options ####################
+##############################################################
+
+#rc_debug="NO" # Set to YES to enable debugging output from rc.d
+rc_info="NO" # Enables display of informational messages at boot.
+rc_startmsgs="YES" # Show "Starting foo:" messages at boot
+rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
+early_late_divider="FILESYSTEMS" # Script that separates early/late
+ # stages of the boot process. Make sure you know
+ # the ramifications if you change this.
+ # See rc.conf(5) for more details.
+always_force_depends="NO" # Set to check that indicated dependencies are
+ # running during boot (can increase boot time).
+
+apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
+apmd_enable="NO" # Run apmd to handle APM event from userland.
+apmd_flags="" # Flags to apmd (if enabled).
+ddb_enable="NO" # Set to YES to load ddb scripts at boot.
+ddb_config="/etc/ddb.conf" # ddb(8) config file.
+devd_enable="YES" # Run devd, to trigger programs on device tree changes.
+devd_flags="" # Additional flags for devd(8).
+#kld_list="" # Kernel modules to load after local disks are mounted
+kldxref_enable="NO" # Build linker.hints files with kldxref(8).
+kldxref_clobber="NO" # Overwrite old linker.hints at boot.
+kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
+powerd_enable="NO" # Run powerd to lower our power usage.
+powerd_flags="" # Flags to powerd (if enabled).
+tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
+tmpsize="20m" # Size of mfs /tmp if created
+tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
+varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
+varsize="32m" # Size of mfs /var if created
+varmfs_flags="-S" # Extra mount options for the mfs /var
+populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
+cleanvar_enable="YES" # Clean the /var directory
+local_startup="/usr/local/etc/rc.d" # startup script dirs.
+script_name_sep=" " # Change if your startup scripts' names contain spaces
+rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
+
+# ZFS support
+zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
+
+gptboot_enable="YES" # GPT boot success/failure reporting.
+
+# Experimental - test before enabling
+gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
+gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
+gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
+gbde_lockdir="/etc" # Where to look for gbde lockfiles
+
+# GELI disk encryption configuration.
+geli_devices="" # List of devices to automatically attach in addition to
+ # GELI devices listed in /etc/fstab.
+geli_tries="" # Number of times to attempt attaching geli device.
+ # If empty, kern.geom.eli.tries will be used.
+geli_default_flags="" # Default flags for geli(8).
+geli_autodetach="YES" # Automatically detach on last close.
+ # Providers are marked as such when all file systems are
+ # mounted.
+# Example use.
+#geli_devices="da1 mirror/home"
+#geli_da1_flags="-p -k /etc/geli/da1.keys"
+#geli_da1_autodetach="NO"
+#geli_mirror_home_flags="-k /etc/geli/home.keys"
+
+root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
+fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
+fsck_y_flags="" # Additional flags for fsck -y
+background_fsck="YES" # Attempt to run fsck in the background where possible.
+background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
+netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB" # Net filesystems.
+extra_netfs_types="NO" # List of network extra filesystem types for delayed
+ # mount at startup (or NO).
+
+##############################################################
+### Network configuration sub-section ######################
+##############################################################
+
+### Basic network and firewall/security options: ###
+hostname="" # Set this!
+hostid_enable="YES" # Set host UUID.
+hostid_file="/etc/hostid" # File with hostuuid.
+nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
+dhclient_program="/sbin/dhclient" # Path to dhcp client program.
+dhclient_flags="" # Extra flags to pass to dhcp client.
+#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
+background_dhclient="NO" # Start dhcp client in the background.
+#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
+synchronous_dhclient="NO" # Start dhclient directly on configured
+ # interfaces during startup.
+defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
+defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
+netif_enable="YES" # Set to YES to initialize network interfaces
+netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec.
+wpa_supplicant_program="/usr/sbin/wpa_supplicant"
+wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
+wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
+#
+firewall_enable="NO" # Set to YES to enable firewall functionality
+firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
+firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
+firewall_quiet="NO" # Set to YES to suppress rule display
+firewall_logging="NO" # Set to YES to enable events logging
+firewall_logif="NO" # Set to YES to create logging-pseudo interface
+firewall_flags="" # Flags passed to ipfw when type is a file
+firewall_coscripts="" # List of executables/scripts to run after
+ # firewall starts/stops
+firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
+ # firewall.
+#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
+ # "client" firewall.
+firewall_simple_iif="ed1" # Inside network interface for "simple"
+ # firewall.
+firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
+ # firewall.
+firewall_simple_oif="ed0" # Outside network interface for "simple"
+ # firewall.
+firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
+ # firewall.
+#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
+ # firewall.
+#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
+ # for "simple" firewall.
+#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
+ # firewall.
+#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
+ # for "simple" firewall.
+firewall_myservices="" # List of TCP ports on which this host
+ # offers services for "workstation" firewall.
+firewall_allowservices="" # List of IPs which have access to
+ # $firewall_myservices for "workstation"
+ # firewall.
+firewall_trusted="" # List of IPs which have full access to this
+ # host for "workstation" firewall.
+firewall_logdeny="NO" # Set to YES to log default denied incoming
+ # packets for "workstation" firewall.
+firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
+ # for which denied incoming packets are not
+ # logged for "workstation" firewall.
+firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
+firewall_nat_interface="" # Public interface or IPaddress to use
+firewall_nat_flags="" # Additional configuration parameters
+dummynet_enable="NO" # Load the dummynet(4) module
+ip_portrange_first="NO" # Set first dynamically allocated port
+ip_portrange_last="NO" # Set last dynamically allocated port
+ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
+ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
+ike_flags="" # Additional flags for IKE daemon
+ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
+ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
+natd_program="/sbin/natd" # path to natd, if you want a different one.
+natd_enable="NO" # Enable natd (if firewall_enable == YES).
+natd_interface="" # Public interface or IPaddress to use.
+natd_flags="" # Additional flags for natd.
+ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
+ipfilter_program="/sbin/ipf" # where the ipfilter program lives
+ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
+ # /usr/src/contrib/ipfilter/rules for examples
+ipfilter_flags="" # additional flags for ipfilter
+ipnat_enable="NO" # Set to YES to enable ipnat functionality
+ipnat_program="/sbin/ipnat" # where the ipnat program lives
+ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
+ipnat_flags="" # additional flags for ipnat
+ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
+ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
+ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
+ipfs_enable="NO" # Set to YES to enable saving and restoring
+ # of state tables at shutdown and boot
+ipfs_program="/sbin/ipfs" # where the ipfs program lives
+ipfs_flags="" # additional flags for ipfs
+pf_enable="NO" # Set to YES to enable packet filter (pf)
+pf_rules="/etc/pf.conf" # rules definition file for pf
+pf_program="/sbin/pfctl" # where the pfctl program lives
+pf_flags="" # additional flags for pfctl
+pflog_enable="NO" # Set to YES to enable packet filter logging
+pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
+pflog_program="/sbin/pflogd" # where the pflogd program lives
+pflog_flags="" # additional flags for pflogd
+ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
+ftpproxy_flags="" # additional flags for ftp-proxy(8)
+pfsync_enable="NO" # Expose pf state to other hosts for syncing
+pfsync_syncdev="" # Interface for pfsync to work through
+pfsync_syncpeer="" # IP address of pfsync peer host
+pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
+tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
+log_in_vain="0" # >=1 to log connects to ports w/o listeners.
+tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
+tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
+ # NOTE: this violates the TCP specification
+icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
+icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
+network_interfaces="auto" # List of network interfaces (or "auto").
+cloned_interfaces="" # List of cloned network interfaces to create.
+#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
+#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
+#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
+#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
+#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
+#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
+#vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
+#create_args_vlan0="vlan 102" # vlan tag for vlan0 device
+#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
+#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8)
+#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
+#
+#autobridge_interfaces="bridge0" # List of bridges to check
+#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
+#
+# If you have any sppp(4) interfaces above, you might also want to set
+# the following parameters. Refer to spppcontrol(8) for their meaning.
+sppp_interfaces="" # List of sppp interfaces.
+#sppp_interfaces="...0" # example: sppp over ...
+#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
+
+# User ppp configuration.
+ppp_enable="NO" # Start user-ppp (or NO).
+ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
+ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
+ # For details see man page for ppp(8). Default is auto.
+ppp_nat="YES" # Use PPP's internal network address translation or NO.
+ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
+ppp_user="root" # Which user to run ppp as
+
+# Start multiple instances of ppp at boot time
+#ppp_profile="profile1 profile2 profile3" # Which profiles to use
+#ppp_profile1_mode="ddial" # Override ppp mode for profile1
+#ppp_profile2_nat="NO" # Override nat mode for profile2
+# profile3 uses default ppp_mode and ppp_nat
+
+### Network daemon (miscellaneous) ###
+hostapd_enable="NO" # Run hostap daemon.
+syslogd_enable="YES" # Run syslog daemon (or NO).
+syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
+syslogd_flags="-s" # Flags to syslogd (if enabled).
+altlog_proglist="" # List of chrooted applicatioins in /var
+inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
+inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
+inetd_flags="-wW -C 60" # Optional flags to inetd
+iscsid_enable="NO" # iSCSI initiator daemon.
+iscsictl_enable="NO" # iSCSI initiator autostart.
+iscsictl_flags="-Aa" # Optional flags to iscsictl.
+hastd_enable="NO" # Run the HAST daemon (YES/NO).
+hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
+hastd_flags="" # Optional flags to hastd.
+ctld_enable="NO" # CAM Target Layer / iSCSI target daemon.
+local_unbound_enable="NO" # local caching resolver
+
+#
+# kerberos. Do not run the admin daemons on slave servers
+#
+kdc_enable="NO" # Run a kerberos 5 KDC (or NO).
+kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC
+kdc_flags="" # Additional flags to the kerberos 5 KDC
+kadmind_enable="NO" # Run kadmind (or NO)
+kadmind_program="/usr/libexec/kadmind" # path to kadmind
+kpasswdd_enable="NO" # Run kpasswdd (or NO)
+kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd
+kfd_enable="NO" # Run kfd (or NO)
+kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon
+kfd_flags=""
+ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon
+ # (master daemon).
+ipropd_master_program="/usr/libexec/ipropd-master"
+ipropd_master_flags="" # Flags to ipropd-master.
+ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master.
+ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves.
+ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon
+ # (slave daemon).
+ipropd_slave_program="/usr/libexec/ipropd-slave"
+ipropd_slave_flags="" # Flags to ipropd-slave.
+ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave.
+ipropd_slave_master="" # master node name.
+
+gssd_enable="NO" # Run the gssd daemon (or NO).
+gssd_program="/usr/sbin/gssd" # Path to gssd.
+gssd_flags="" # Flags for gssd.
+
+rwhod_enable="NO" # Run the rwho daemon (or NO).
+rwhod_flags="" # Flags for rwhod
+rarpd_enable="NO" # Run rarpd (or NO).
+rarpd_flags="-a" # Flags to rarpd.
+bootparamd_enable="NO" # Run bootparamd (or NO).
+bootparamd_flags="" # Flags to bootparamd
+pppoed_enable="NO" # Run the PPP over Ethernet daemon.
+pppoed_provider="*" # Provider and ppp(8) config file entry.
+pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
+pppoed_interface="fxp0" # The interface that pppoed runs on.
+sshd_enable="NO" # Enable sshd
+sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
+sshd_flags="" # Additional flags for sshd.
+ftpd_enable="NO" # Enable stand-alone ftpd.
+ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
+ftpd_flags="" # Additional flags to stand-alone ftpd.
+
+### Network daemon (NFS): All need rpcbind_enable="YES" ###
+amd_enable="NO" # Run amd service with $amd_flags (or NO).
+amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
+amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
+amd_map_program="NO" # Can be set to "ypcat -k amd.master"
+autofs_enable="NO" # Run automountd(8)
+nfs_client_enable="NO" # This host is an NFS client (or NO).
+nfs_access_cache="60" # Client cache timeout in seconds
+nfs_server_enable="NO" # This host is an NFS server (or NO).
+oldnfs_server_enable="NO" # Run the old NFS server (YES/NO).
+nfs_server_flags="-u -t" # Flags to nfsd (if enabled).
+mountd_enable="NO" # Run mountd (or NO).
+mountd_flags="-r" # Flags to mountd (if NFS server enabled).
+weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
+nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
+nfs_bufpackets="" # bufspace (in packets) for client
+rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
+rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
+rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
+rpc_statd_flags="" # Flags to rpc.statd (if enabled).
+rpcbind_enable="NO" # Run the portmapper service (YES/NO).
+rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
+rpcbind_flags="" # Flags to rpcbind (if enabled).
+rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
+keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
+keyserv_flags="" # Flags to keyserv (if enabled).
+nfsv4_server_enable="NO" # Enable support for NFSv4
+nfscbd_enable="NO" # NFSv4 client side callback daemon
+nfscbd_flags="" # Flags for nfscbd
+nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
+nfsuserd_flags="" # Flags for nfsuserd
+
+### Network Time Services options: ###
+timed_enable="NO" # Run the time daemon (or NO).
+timed_flags="" # Flags to timed (if enabled).
+ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
+ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
+ntpdate_flags="-b" # Flags to ntpdate (if enabled).
+ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
+ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
+ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
+ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
+ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
+ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
+ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
+ # Flags to ntpd (if enabled).
+
+# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
+nis_client_enable="NO" # We're an NIS client (or NO).
+nis_client_flags="" # Flags to ypbind (if enabled).
+nis_ypset_enable="NO" # Run ypset at boot time (or NO).
+nis_ypset_flags="" # Flags to ypset (if enabled).
+nis_server_enable="NO" # We're an NIS server (or NO).
+nis_server_flags="" # Flags to ypserv (if enabled).
+nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
+nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
+nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
+nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
+
+### SNMP daemon ###
+# Be sure to understand the security implications of running SNMP v1/v2
+# in your network.
+bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
+bsnmpd_flags="" # Flags for bsnmpd.
+
+### Network routing options: ###
+defaultrouter="NO" # Set to default gateway (or NO).
+static_arp_pairs="" # Set to static ARP list (or leave empty).
+static_ndp_pairs="" # Set to static NDP list (or leave empty).
+static_routes="" # Set to static route list (or leave empty).
+natm_static_routes="" # Set to static route list for NATM (or leave empty).
+gateway_enable="NO" # Set to YES if this host will be a gateway.
+routed_enable="NO" # Set to YES to enable a routing daemon.
+routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
+routed_flags="-q" # Flags for routing daemon.
+mrouted_enable="NO" # Do IPv4 multicast routing.
+mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
+ # routing daemon. You need to
+ # install it from package or
+ # port.
+mrouted_flags="" # Flags for multicast routing daemon.
+arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
+forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
+accept_sourceroute="NO" # accept source routed packets to us
+
+### ATM interface options: ###
+atm_enable="NO" # Configure ATM interfaces (or NO).
+#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
+#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
+#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
+#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
+#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
+#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
+atm_pvcs="" # Set to PVC list (or leave empty).
+atm_arps="" # Set to permanent ARP list (or leave empty).
+
+### Bluetooth ###
+hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
+hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
+
+sdpd_enable="NO" # Enable sdpd(8) (or NO)
+sdpd_control="/var/run/sdp" # sdpd(8) control socket
+sdpd_groupname="nobody" # set spdp(8) user/group to run as after
+sdpd_username="nobody" # it initializes
+
+bthidd_enable="NO" # Enable bthidd(8) (or NO)
+bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
+bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
+
+rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
+rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
+#
+#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
+rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
+#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
+#rfcomm_pppd_server_one_register_dun="NO" # for 'one'
+#
+#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
+rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
+#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
+#rfcomm_pppd_server_two_register_dun="NO" # for 'two'
+
+ubthidhci_enable="NO" # Switch an USB BT controller present on
+#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
+#ubthidhci_addr="2" # Check usbconfig list to find the correct
+ # numbers for your system.
+
+### Network link/usability verification options
+netwait_enable="NO" # Enable rc.d/netwait (or NO)
+#netwait_ip="" # IP addresses to be pinged by netwait.
+netwait_timeout="60" # Total number of seconds to perform pings.
+#netwait_if="" # Interface name to watch link state on.
+netwait_if_timeout="30" # Total number of seconds to monitor link state.
+
+### Miscellaneous network options: ###
+icmp_bmcastecho="NO" # respond to broadcast ping packets
+
+### IPv6 options: ###
+ipv6_network_interfaces="auto" # List of IPv6 network interfaces
+ # (or "auto" or "none").
+ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
+ # corresponding $ifconfig_IF_ipv6 is
+ # marked as IFDISABLED for security
+ # reason.
+ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
+#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
+ipv6_static_routes="" # Set to static route list (or leave empty).
+#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
+ # route toward loopback interface.
+#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
+ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
+ipv6_cpe_wanif="NO" # Set to the upstram interface name if this
+ # node will work as a router to forward IPv6
+ # packets not explicitly addressed to itself.
+ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
+ # (RFC 4941)
+
+route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
+route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
+route6d_flags="" # Flags to IPv6 routing daemon.
+#route6d_flags="-l" # Example for route6d with only IPv6 site local
+ # addrs.
+#route6d_flags="-q" # If you want to run a routing daemon on an end
+ # node, you should stop advertisement.
+#ipv6_network_interfaces="ed0 ep0" # Examples for router
+ # or static configuration for end node.
+ # Choose correct prefix value.
+#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
+#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
+ipv6_default_interface="NO" # Default output interface for scoped addrs.
+ # This works only with
+ # ipv6_gateway_enable="NO".
+rtsol_flags="" # Flags to IPv6 router solicitation.
+rtsold_enable="NO" # Set to YES to enable an IPv6 router
+ # solicitation daemon.
+rtsold_flags="-a" # Flags to an IPv6 router solicitation
+ # daemon.
+rtadvd_enable="NO" # Set to YES to enable an IPv6 router
+ # advertisement daemon. If set to YES,
+ # this router becomes a possible candidate
+ # IPv6 default router for local subnets.
+rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
+mroute6d_enable="NO" # Do IPv6 multicast routing.
+mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
+ # routing daemon. You need to
+ # install it from package or
+ # port.
+mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
+stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
+ # tunneling interface. Specify this entry
+ # to enable 6to4 interface.
+stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
+ # to limit peer addr range. Effective value
+ # is 0-31.
+stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
+ # If you like, you can set "AUTO" for this.
+stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
+ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
+ # communication. (like ::ffff:a.b.c.d)
+ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
+ # see /usr/src/contrib/ipfilter/rules
+ # for examples
+ip6addrctl_enable="YES" # Set to YES to enable default address selection
+ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
+ip6addrctl_policy="AUTO" # A pre-defined address selection policy
+ # (ipv4_prefer, ipv6_prefer, or AUTO)
+
+##############################################################
+### System console options #################################
+##############################################################
+
+keyboard="" # keyboard device to use (default /dev/kbd0).
+keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
+keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
+keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
+keychange="NO" # function keys default values (or NO).
+cursor="NO" # cursor type {normal|blink|destructive} (or NO).
+scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
+font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
+font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
+font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
+blanktime="300" # blank time (in seconds) or "NO" to turn it off.
+saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
+moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
+ # specifically overriden in rc.conf(5).
+moused_enable="NO" # Run the mouse daemon.
+moused_type="auto" # See man page for rc.conf(5) for available settings.
+moused_port="/dev/psm0" # Set to your mouse port.
+moused_flags="" # Any additional flags to moused.
+mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
+ # language code table, specify alternative range
+ # start like mousechar_start=3, see vidcontrol(1)
+allscreens_flags="" # Set this vidcontrol mode for all virtual screens
+allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
+
+##############################################################
+### Mail Transfer Agent (MTA) options ######################
+##############################################################
+
+mta_start_script="/etc/rc.sendmail"
+ # Script to start your chosen MTA, called by /etc/rc.
+# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
+sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
+sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
+sendmail_procname="/usr/sbin/sendmail" # sendmail process name
+sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
+sendmail_cert_create="YES" # Create a server certificate if none (YES/NO)
+#sendmail_cert_cn="CN" # CN of the generate certificate
+sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
+sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
+ # Flags for localhost-only MTA
+sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
+sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
+sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
+sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
+ # Flags for sendmail_msp_queue daemon.
+sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
+
+
+##############################################################
+### Miscellaneous administrative options ###################
+##############################################################
+
+auditd_enable="NO" # Run the audit daemon.
+auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
+auditd_flags="" # Which options to pass to the audit daemon.
+auditdistd_enable="NO" # Run the audit daemon.
+auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
+auditdistd_flags="" # Which options to pass to the auditdistd daemon.
+cron_enable="YES" # Run the periodic job daemon.
+cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
+cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
+cron_flags="" # Which options to pass to the cron daemon.
+lpd_enable="NO" # Run the line printer daemon.
+lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
+lpd_flags="" # Flags to lpd (if enabled).
+nscd_enable="NO" # Run the nsswitch caching daemon.
+chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
+chkprintcap_flags="-d" # Create missing directories by default.
+dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
+dumpdir="/var/crash" # Directory where crash dumps are to be stored
+savecore_flags="-m 10" # Used if dumpdev is enabled above, and present.
+ # By default, only the 10 most recent kernel dumps
+ # are saved.
+crashinfo_enable="YES" # Automatically generate crash dump summary.
+crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
+quota_enable="NO" # turn on quotas on startup (or NO).
+check_quotas="YES" # Check quotas on startup (or NO).
+quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
+quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
+quotacheck_flags="-a" # Check all file system quotas (if enabled)
+accounting_enable="NO" # Turn on process accounting (or NO).
+ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
+ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
+firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
+ # this file exists. Should be on a R/W filesystem so
+ # the file can be deleted after the boot completes.
+
+# Emulation/compatibility services provided by /etc/rc.d/abi
+sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
+linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
+svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
+clear_tmp_enable="NO" # Clear /tmp at startup.
+clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
+ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
+ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
+ # shared library search paths
+ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
+ # 32-bit compatibility shared library search paths
+ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
+ # a.out shared library search paths
+ldconfig_local_dirs="/usr/local/libdata/ldconfig"
+ # Local directories with ldconfig configuration files.
+ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
+ # Local directories with 32-bit compatibility ldconfig
+ # configuration files.
+kern_securelevel_enable="NO" # kernel security level (see security(7))
+kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
+ # Note that setting securelevel to 0 will result
+ # in the system booting with securelevel set to 1, as
+ # init(8) will raise the level when rc(8) completes.
+update_motd="YES" # update version info in /etc/motd (or NO)
+entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
+ # /var/db/entropy-file is preferred if / is not avail.
+entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
+entropy_save_sz="4096" # Size of the entropy cache files.
+entropy_save_num="8" # Number of entropy cache files to save.
+harvest_interrupt="YES" # Entropy device harvests interrupt randomness
+harvest_ethernet="YES" # Entropy device harvests ethernet randomness
+harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
+harvest_swi="YES" # Entropy device harvests internal SWI randomness
+dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
+watchdogd_enable="NO" # Start the software watchdog daemon
+watchdogd_flags="" # Flags to watchdogd (if enabled)
+devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
+ # devfs(8) rules.
+devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
+devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
+ # apply (must be mounted already, i.e. fstab(5))
+devfs_load_rulesets="YES" # Enable to always load the default rulesets
+performance_cx_lowest="Cmax" # Online CPU idle state
+performance_cpu_freq="NONE" # Online CPU frequency
+economy_cx_lowest="Cmax" # Offline CPU idle state
+economy_cpu_freq="NONE" # Offline CPU frequency
+virecover_enable="YES" # Perform housekeeping for the vi(1) editor
+ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
+bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
+ # ruleset file.
+newsyslog_enable="YES" # Run newsyslog at startup.
+newsyslog_flags="-CN" # Newsyslog flags to create marked files
+mixer_enable="YES" # Run the sound mixer.
+opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
+casperd_enable="YES" # casperd(8) daemon
+
+# rctl(8) requires kernel options RACCT and RCTL
+rctl_enable="NO" # Load rctl(8) rules on boot
+rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5).
+
+##############################################################
+### Jail Configuration (see rc.conf(5) manual page) ##########
+##############################################################
+jail_enable="NO" # Set to NO to disable starting of any jails
+jail_parallel_start="NO" # Start jails in the background
+jail_list="" # Space separated list of names of jails
+
+##############################################################
+### Define source_rc_confs, the mechanism used by /etc/rc.* ##
+### scripts to source rc_conf_files overrides safely. ##
+##############################################################
+
+if [ -z "${source_rc_confs_defined}" ]; then
+ source_rc_confs_defined=yes
+ source_rc_confs() {
+ local i sourced_files
+ for i in ${rc_conf_files}; do
+ case ${sourced_files} in
+ *:$i:*)
+ ;;
+ *)
+ sourced_files="${sourced_files}:$i:"
+ if [ -r $i ]; then
+ . $i
+ fi
+ ;;
+ esac
+ done
+ }
+fi
Index: etc/devd.conf
===================================================================
--- etc/devd.conf
+++ etc/devd.conf
@@ -318,4 +318,16 @@
action "/usr/local/etc/rc.d/postgresql restart";
};
+# Discard autofs caches, useful for the -media special map. The one
+# second delay is for GEOM to finish tasting.
+#
+# XXX: We should probably have a devctl(4) event that fires after GEOM
+# tasting.
+#
+notify 100 {
+ match "system" "DEVFS";
+ match "cdev" "(da|mmcsd)[0-9]+";
+ action "sleep 1 && /usr/sbin/automount -c";
+};
+
*/
Index: usr.sbin/autofs/auto_master.5
===================================================================
--- usr.sbin/autofs/auto_master.5
+++ usr.sbin/autofs/auto_master.5
@@ -27,7 +27,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd November 21, 2014
+.Dd November 22, 2014
.Dt AUTO_MASTER 5
.Os
.Sh NAME
@@ -213,14 +213,17 @@
.Pp
.Bl -tag -width "-hosts" -compact
.It Li -hosts
-This map queries the remote NFS server and maps exported volumes.
-It is traditionally mounted on
-.Pa /net .
-It enables access to files on a remote NFS server by accessing
+Query the remote NFS server and map exported shares.
+This map is traditionally mounted on
+.Pa /net ,
+and enables access to files on a remote NFS server through
.Pa /net/nfs-server-ip/share-name/
directory, without the need for any further configuration.
+.It Li -media
+Query devices that are not yet mounted, but contain valid filesystems.
+Generally used to access files on removable media.
.It Li -null
-This map prevents the
+Prevent
.Xr automountd 8
from mounting anything on the mountpoint.
.El

File Metadata

Mime Type
text/plain
Expires
Sun, Nov 8, 12:05 PM (2 h, 12 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
41584711
Default Alt Text
D1210.1794139526.diff (41 KB)

Event Timeline