D17955.1793796076.diff
No OneTemporary
Actions

Authored By

Unknown

Size

534 KB

Referenced Files

None

Subscribers

None

D17955.1793796076.diff
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.

	Index: sys/gnu/dts/mips/11ACNAS.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/11ACNAS.dts
	@@ -0,0 +1,27 @@
	+/dts-v1/;
	+
	+#include "W2914NSV2.dtsi"
	+
	+/ {
	+ compatible = "wevo,11acnas", "wevo,w2914ns-v2", "mediatek,mt7621-soc";
	+ model = "WeVO 11AC NAS Router";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ // Only USB LED is connected to GPIO.
	+ // All of other LEDs are connected directly to
	+ // switch, WiFi chip, Vcc, so they are not controllable
	+ // via GPIO
	+
	+ usb {
	+ label = "11acnas:green:usb";
	+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/3G-6200N.dts
	===================================================================
	--- sys/gnu/dts/mips/3G-6200N.dts
	+++ sys/gnu/dts/mips/3G-6200N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "3G-6200N", "ralink,rt3050-soc";
	+ compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
	model = "Edimax 3g-6200n";

	cfi@1f000000 {
	@@ -49,17 +52,17 @@

	power {
	label = "3g-6200n:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "3g-6200n:amber:wlan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "3g-6200n:blue:3g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -69,16 +72,16 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x211>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	- wlanswitch {
	+ rfkill {
	label = "wlanswitch";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	Index: sys/gnu/dts/mips/3G-6200NL.dts
	===================================================================
	--- sys/gnu/dts/mips/3G-6200NL.dts
	+++ sys/gnu/dts/mips/3G-6200NL.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "3G-6200NL", "ralink,rt3050-soc";
	+ compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
	model = "Edimax 3g-6200nl";

	cfi@1f000000 {
	@@ -47,9 +50,14 @@
	gpio-leds {
	compatible = "gpio-leds";

	+ internet {
	+ label = "3g-6200nl:green:internet";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	wlan {
	- label = "3g-6200nl:amber:wlan";
	- gpios = <&gpio0 14 1>;
	+ label = "3g-6200nl:green:wlan";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -59,10 +67,10 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x211>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -81,7 +89,7 @@
	};

	&esw {
	- mediatek,portmap = <0x2f>;
	+ mediatek,portdisable = <0x37>;
	};

	&wmac {
	Index: sys/gnu/dts/mips/3G150B.dts
	===================================================================
	--- sys/gnu/dts/mips/3G150B.dts
	+++ sys/gnu/dts/mips/3G150B.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "3G150B", "ralink,rt5350-soc";
	+ compatible = "tenda,3g150b", "ralink,rt5350-soc";
	model = "Tenda 3G150B";

	gpio-leds {
	@@ -11,12 +14,12 @@

	ap {
	label = "3g150b:blue:ap";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "3g150b:blue:3g";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -40,7 +43,7 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/3G300M.dts
	===================================================================
	--- sys/gnu/dts/mips/3G300M.dts
	+++ sys/gnu/dts/mips/3G300M.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "3G300M", "ralink,rt3052-soc";
	+ compatible = "tenda,3g300m", "ralink,rt3052-soc";
	model = "Tenda 3G300M";

	gpio-leds {
	@@ -11,32 +14,32 @@

	3grouter {
	label = "3g300m:blue:3grouter";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	ap {
	label = "3g300m:blue:ap";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wisprouter {
	label = "3g300m:blue:wisprouter";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wirelessrouter {
	label = "3g300m:blue:wirelessrouter";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "3g300m:blue:3g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wpsreset {
	label = "3g300m:blue:wpsreset";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -48,14 +51,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	@@ -68,7 +71,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/A5-V11.dts
	===================================================================
	--- sys/gnu/dts/mips/A5-V11.dts
	+++ sys/gnu/dts/mips/A5-V11.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "A5-V11", "ralink,rt5350-soc";
	+ compatible = "unbranded,a5-v11", "ralink,rt5350-soc";
	model = "A5-V11";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "a5-v11:blue:system";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "a5-v11:red:power";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -40,13 +43,13 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	root_hub {
	gpio-export,name = "root_hub";
	gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -59,7 +62,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "pm25lq032";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/AC1200RM.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/AC1200RM.dts
	@@ -0,0 +1,176 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * 1. Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * 2. Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in the
	+ * documentation and/or other materials provided with the distribution.
	+ * 3. Neither the names of the copyright holders nor the names of any
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc";
	+ model = "ALFA Network AC1200RM";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wlan2g {
	+ label = "ac1200rm:green:wlan2g";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "ac1200rm:green:wps";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+
	+ led {
	+ led-sources = <2>;
	+ led-active-low;
	+ };
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "nd_sd", "spi refclk", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x1000>;
	+ };
	+
	+ partition@031000 {
	+ label = "config";
	+ reg = <0x31000 0xf000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: sys/gnu/dts/mips/AI-BR100.dts
	===================================================================
	--- sys/gnu/dts/mips/AI-BR100.dts
	+++ sys/gnu/dts/mips/AI-BR100.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AI-BR100", "ralink,mt7620a-soc";
	+ compatible = "aigale,ai-br100", "ralink,mt7620a-soc";
	model = "Aigale Ai-BR100";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wan {
	label = "ai-br100:blue:wan";
	- gpios = <&gpio2 4 1>;
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "ai-br100:blue:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -50,7 +53,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -96,8 +98,6 @@
	};

	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "llllw";
	};
	Index: sys/gnu/dts/mips/AIR3GII.dts
	===================================================================
	--- sys/gnu/dts/mips/AIR3GII.dts
	+++ sys/gnu/dts/mips/AIR3GII.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AIR3GII", "ralink,rt5350-soc";
	+ compatible = "airlive,air3gii", "ralink,rt5350-soc";
	model = "AirLive Air3GII";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wlan {
	label = "air3gii:green:wlan";
	- gpios = <&gpio0 8 0>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	};

	mobile {
	label = "air3gii:green:mobile";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -46,7 +49,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q32b";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ALL0239-3G.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL0239-3G.dts
	+++ sys/gnu/dts/mips/ALL0239-3G.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ALL0239-3G", "ralink,rt3052-soc";
	+ compatible = "allnet,all0239-3g", "ralink,rt3052-soc";
	model = "Allnet ALL0239-3G";


	@@ -44,22 +47,22 @@

	usb {
	label = "all0239-3g:green:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "all0239-3g:green:3g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "all0239-3g:green:status";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "all0239-3g:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -71,20 +74,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	connect {
	label = "connect";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0xda>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_CONNECT>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ALL0256N-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL0256N-4M.dts
	+++ sys/gnu/dts/mips/ALL0256N-4M.dts
	@@ -1,46 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "ALL0256N.dtsi"

	/ {
	- compatible = "ALL0256N", "ralink,rt3050-soc";
	- model = "Allnet ALL0256N";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- rssilow {
	- label = "all0256n:green:rssilow";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- rssimed {
	- label = "all0256n:green:rssimed";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- rssihigh {
	- label = "all0256n:green:rssihigh";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	- };
	-};
	-
	-&gpio0 {
	- status = "okay";
	+ compatible = "allnet,all0256n-4m", "allnet,all0256n", "ralink,rt3050-soc";
	+ model = "Allnet ALL0256N (4M)";
	};

	&spi0 {
	@@ -51,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -78,24 +41,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x3f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/ALL0256N-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL0256N-8M.dts
	+++ sys/gnu/dts/mips/ALL0256N-8M.dts
	@@ -1,46 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "ALL0256N.dtsi"

	/ {
	- compatible = "ALL0256N", "ralink,rt3050-soc";
	- model = "Allnet ALL0256N";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- rssilow {
	- label = "all0256n:green:rssilow";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- rssimed {
	- label = "all0256n:green:rssimed";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- rssihigh {
	- label = "all0256n:green:rssihigh";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	- };
	-};
	-
	-&gpio0 {
	- status = "okay";
	+ compatible = "allnet,all0256n-8m", "allnet,all0256n", "ralink,rt3050-soc";
	+ model = "Allnet ALL0256N (8M)";
	};

	&spi0 {
	@@ -51,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -78,24 +41,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x3f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/ALL0256N.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ALL0256N.dtsi
	@@ -0,0 +1,65 @@
	+#include "rt3050.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "allnet,all0256n", "ralink,rt3050-soc";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ rssilow {
	+ label = "all0256n:green:rssilow";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ rssimed {
	+ label = "all0256n:green:rssimed";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ rssihigh {
	+ label = "all0256n:green:rssihigh";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: sys/gnu/dts/mips/ALL5002.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL5002.dts
	+++ sys/gnu/dts/mips/ALL5002.dts
	@@ -2,13 +2,19 @@

	#include "rt3352.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ALL5002", "ralink,rt3352-soc";
	+ compatible = "allnet,all5002", "ralink,rt3352-soc";
	model = "Allnet ALL5002";

	i2c-gpio {
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	compatible = "i2c-gpio";
	- gpios = <&gpio0 1 0 &gpio0 2 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
	i2c-gpio,delay-us = <10>;

	pcf0: iexp@38 {
	@@ -29,12 +35,12 @@

	ld1 {
	label = "all5002:green:ld1";
	- gpios = <&pcf0 0 1>;
	+ gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
	};

	ld2 {
	label = "all5002:green:ld2";
	- gpios = <&pcf0 1 1>;
	+ gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -51,7 +57,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ALL5003.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL5003.dts
	+++ sys/gnu/dts/mips/ALL5003.dts
	@@ -2,13 +2,19 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ALL5003", "ralink,rt5350-soc";
	+ compatible = "allnet,all5003", "ralink,rt5350-soc";
	model = "Allnet ALL5003";

	i2c-gpio {
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	compatible = "i2c-gpio";
	- gpios = <&gpio0 1 0 &gpio0 2 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
	i2c-gpio,delay-us = <10>;

	pcf0: iexp@38 {
	@@ -29,12 +35,12 @@

	ld1 {
	label = "all5003:green:ld1";
	- gpios = <&pcf0 0 1>;
	+ gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
	};

	ld2 {
	label = "all5003:green:ld2";
	- gpios = <&pcf0 1 1>;
	+ gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -51,7 +57,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/AP-MT7621A-V60.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/AP-MT7621A-V60.dts
	@@ -0,0 +1,127 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+/ {
	+ compatible = "mediatek,ap-mt7621a-v60", "mediatek,mt7621-soc";
	+ model = "Mediatek AP-MT7621A-V60 EVB";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ sound {
	+ compatible = "simple-audio-card";
	+ simple-audio-card,name = "Audio-I2S";
	+ simple-audio-card,format = "i2s";
	+ simple-audio-card,bitclock-master = <&dailink0_master>;
	+ simple-audio-card,frame-master = <&dailink0_master>;
	+ simple-audio-card,widgets =
	+ "Microphone", "Microphone Jack",
	+ "Headphone", "Headphone Jack";
	+ simple-audio-card,routing =
	+ "LINPUT1", "Microphone Jack",
	+ "RINPUT1", "Microphone Jack",
	+ "Headphone Jack", "HP_L",
	+ "Headphone Jack", "HP_R";
	+ simple-audio-card,mclk-fs = <256>;
	+
	+ simple-audio-card,cpu {
	+ sound-dai = <&i2s>;
	+ };
	+
	+ dailink0_master: simple-audio-card,codec {
	+ sound-dai = <&codec>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart2", "rgmii2";
	+ ralink,function = "gpio";
	+ };
	+ };
	+ i2s_pins: i2s {
	+ i2s {
	+ ralink,group = "uart3";
	+ ralink,function = "i2s";
	+ };
	+ };
	+};
	+
	+&i2c {
	+ status = "okay";
	+
	+ codec: wm8960@1a {
	+ #sound-dai-cells = <0>;
	+ compatible = "wlf,wm8960";
	+ reg = <0x1a>;
	+ wlf,shared-lrclk;
	+ };
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&i2s {
	+ #sound-dai-cells = <0>;
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2s_pins>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ mx25l6405d@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "mx25l6405d","jedec,spi-nor";
	+ reg = <0 0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x5>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/AR670W.dts
	===================================================================
	--- sys/gnu/dts/mips/AR670W.dts
	+++ sys/gnu/dts/mips/AR670W.dts
	@@ -2,8 +2,11 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AR670W", "ralink,rt2880-soc";
	+ compatible = "airlink101,ar670w", "ralink,rt2880-soc";
	model = "Airlink101 AR670W";

	cfi@bdc00000 {
	@@ -36,12 +39,12 @@

	status {
	label = "ar670w:green:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wpsblue {
	label = "ar670w:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,14 +56,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/AR725W.dts
	===================================================================
	--- sys/gnu/dts/mips/AR725W.dts
	+++ sys/gnu/dts/mips/AR725W.dts
	@@ -2,8 +2,11 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AR725W", "ralink,rt2880-soc";
	+ compatible = "airlink101,ar725w", "ralink,rt2880-soc";
	model = "Airlink101 AR725W";

	cfi@bdc00000 {
	@@ -41,17 +44,17 @@

	status {
	label = "ar725w:green:power";
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	wpsred {
	label = "ar725w:red:wps";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	wpsblue {
	label = "ar725w:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -63,14 +66,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ASL26555-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/ASL26555-16M.dts
	+++ sys/gnu/dts/mips/ASL26555-16M.dts
	@@ -1,77 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "ASL26555.dtsi"

	/ {
	- compatible = "ASL26555", "ralink,rt3050-soc";
	- model = "Alpha ASL26555";
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 0>;
	- linux,code = <0x198>;
	- };
	-
	- wps {
	- label = "wps";
	- gpios = <&gpio0 12 0>;
	- linux,code = <0x211>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- eth {
	- label = "asl26555:green:eth";
	- gpios = <&gpio0 0 1>;
	- };
	-
	- wan-red {
	- label = "asl26555:red:wan";
	- gpios = <&gpio0 1 0>;
	- };
	-
	- wan-green {
	- label = "asl26555:green:wan";
	- gpios = <&gpio0 2 0>;
	- };
	-
	- wlan {
	- label = "asl26555:green:wlan";
	- gpios = <&gpio0 7 0>;
	- };
	-
	- power-green {
	- label = "asl26555:green:power";
	- gpios = <&gpio0 8 0>;
	- };
	-
	- power-red {
	- label = "asl26555:red:power";
	- gpios = <&gpio0 9 0>;
	- };
	-
	- 3g-green {
	- label = "asl26555:green:3g";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- 3g-red {
	- label = "asl26555:red:3g";
	- gpios = <&gpio0 17 1>;
	- };
	- };
	-};
	-
	-&gpio0 {
	- status = "okay";
	+ compatible = "alphanetworks,asl26555-16m", "alphanetworks,asl26555", "ralink,rt3050-soc";
	+ model = "Alpha ASL26555 (16M)";
	};

	&spi0 {
	@@ -82,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25sl12801";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -127,28 +59,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&devdata 0x4004>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x1e>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	-};
	-
	-&otg {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/ASL26555-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/ASL26555-8M.dts
	+++ sys/gnu/dts/mips/ASL26555-8M.dts
	@@ -1,77 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "ASL26555.dtsi"

	/ {
	- compatible = "ASL26555", "ralink,rt3050-soc";
	- model = "Alpha ASL26555";
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 0>;
	- linux,code = <0x198>;
	- };
	-
	- wps {
	- label = "wps";
	- gpios = <&gpio0 12 0>;
	- linux,code = <0x211>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- eth {
	- label = "asl26555:green:eth";
	- gpios = <&gpio0 0 1>;
	- };
	-
	- wan-red {
	- label = "asl26555:red:wan";
	- gpios = <&gpio0 1 0>;
	- };
	-
	- wan-green {
	- label = "asl26555:green:wan";
	- gpios = <&gpio0 2 0>;
	- };
	-
	- wlan {
	- label = "asl26555:green:wlan";
	- gpios = <&gpio0 7 0>;
	- };
	-
	- power-green {
	- label = "asl26555:green:power";
	- gpios = <&gpio0 8 0>;
	- };
	-
	- power-red {
	- label = "asl26555:red:power";
	- gpios = <&gpio0 9 0>;
	- };
	-
	- 3g-green {
	- label = "asl26555:green:3g";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- 3g-red {
	- label = "asl26555:red:3g";
	- gpios = <&gpio0 17 1>;
	- };
	- };
	-};
	-
	-&gpio0 {
	- status = "okay";
	+ compatible = "alphanetworks,asl26555-8m", "alphanetworks,asl26555", "ralink,rt3050-soc";
	+ model = "Alpha ASL26555 (8M)";
	};

	&spi0 {
	@@ -82,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25sl064p";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -91,7 +23,7 @@
	read-only;
	};

	- ubootenv: partition@30000 {
	+ devdata: partition@30000 {
	label = "uboot-env";
	reg = <0x30000 0x10000>;
	read-only;
	@@ -121,28 +53,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&ubootenv 0x4004>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x1e>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&ubootenv 0x4000>;
	-};
	-
	-&otg {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/ASL26555.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ASL26555.dtsi
	@@ -0,0 +1,100 @@
	+#include "rt3050.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "alphanetworks,asl26555", "ralink,rt3050-soc";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ eth {
	+ label = "asl26555:green:eth";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan-red {
	+ label = "asl26555:red:wan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wan-green {
	+ label = "asl26555:green:wan";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wlan {
	+ label = "asl26555:green:wlan";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power-green {
	+ label = "asl26555:green:power";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power-red {
	+ label = "asl26555:red:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ 3g-green {
	+ label = "asl26555:green:3g";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ 3g-red {
	+ label = "asl26555:red:3g";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&devdata 0x4004>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x1e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devdata 0x4000>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/ATP-52B.dts
	===================================================================
	--- sys/gnu/dts/mips/ATP-52B.dts
	+++ sys/gnu/dts/mips/ATP-52B.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ATP-52B", "ralink,rt3052-soc";
	+ compatible = "argus,atp-52b", "ralink,rt3052-soc";
	model = "Argus ATP-52B";

	cfi@1f000000 {
	@@ -41,12 +44,12 @@

	run {
	label = "atp-52b:green:run";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	net {
	label = "atp-52b:amber:net";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -58,14 +61,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/AWAPN2403.dts
	===================================================================
	--- sys/gnu/dts/mips/AWAPN2403.dts
	+++ sys/gnu/dts/mips/AWAPN2403.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AWAPN2403", "ralink,rt3052-soc";
	+ compatible = "asiarf,awapn2403", "ralink,rt3052-soc";
	model = "AsiaRF AWAPN2403";

	gpio-leds {
	@@ -11,7 +14,7 @@

	link {
	label = "awapn2403:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,7 +40,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/AWM002-4M.dtsi
	===================================================================
	--- sys/gnu/dts/mips/AWM002-4M.dtsi
	+++ /dev/null
	@@ -1,11 +0,0 @@
	-#include "AWM002.dtsi"
	-
	-/ {
	- compatible = "AWM002", "ralink,rt5350-soc";
	- model = "AsiaRF AWM002";
	-};
	-
	-&m25p80 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l3205d";
	-};
	Index: sys/gnu/dts/mips/AWM002-8M.dtsi
	===================================================================
	--- sys/gnu/dts/mips/AWM002-8M.dtsi
	+++ /dev/null
	@@ -1,11 +0,0 @@
	-#include "AWM002.dtsi"
	-
	-/ {
	- compatible = "AWM002", "ralink,rt5350-soc";
	- model = "AsiaRF AWM002";
	-};
	-
	-&m25p80 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l6405d";
	-};
	Index: sys/gnu/dts/mips/AWM002-EVB-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/AWM002-EVB-4M.dts
	+++ sys/gnu/dts/mips/AWM002-EVB-4M.dts
	@@ -1,53 +1,43 @@
	/dts-v1/;

	-#include "AWM002-4M.dtsi"
	+#include "AWM002-EVB.dtsi"

	/ {
	- model = "AsiaRF AWM002 EVB";
	+ compatible = "asiarf,awm002-evb-4m", "ralink,rt5350-soc";
	+ model = "AsiaRF AWM002 EVB (4M)";
	+};

	- gpio-leds {
	- compatible = "gpio-leds";
	+&spi0 {
	+ status = "okay";

	- tx {
	- label = "awm002-evb:green:tx";
	- gpios = <&gpio0 15 1>;
	+ m25p80: m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ reg = <0>;
	+ compatible = "jedec,spi-nor";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- rx {
	- label = "awm002-evb:green:rx";
	- gpios = <&gpio0 16 1>;
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};

	- wps {
	- label = "awm002-evb:green:wps";
	- gpios = <&gpio0 21 1>;
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	};
	- };

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 20 1>;
	- linux,code = <0x32>;
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	};
	};
	};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/AWM002-EVB-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/AWM002-EVB-8M.dts
	+++ sys/gnu/dts/mips/AWM002-EVB-8M.dts
	@@ -1,53 +1,43 @@
	/dts-v1/;

	-#include "AWM002-8M.dtsi"
	+#include "AWM002-EVB.dtsi"

	/ {
	- model = "AsiaRF AWM002 EVB";
	+ compatible = "asiarf,awm002-evb-8m", "ralink,rt5350-soc";
	+ model = "AsiaRF AWM002 EVB (8M)";
	+};

	- gpio-leds {
	- compatible = "gpio-leds";
	+&spi0 {
	+ status = "okay";

	- tx {
	- label = "awm002-evb:green:tx";
	- gpios = <&gpio0 15 1>;
	+ m25p80: m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ reg = <0>;
	+ compatible = "jedec,spi-nor";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- rx {
	- label = "awm002-evb:green:rx";
	- gpios = <&gpio0 16 1>;
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};

	- wps {
	- label = "awm002-evb:green:wps";
	- gpios = <&gpio0 21 1>;
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	};
	- };

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 20 1>;
	- linux,code = <0x32>;
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/AWM002-EVB.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/AWM002-EVB.dtsi
	@@ -0,0 +1,75 @@
	+#include "rt5350.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "asiarf,awm002-evb", "ralink,rt5350-soc";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ tx {
	+ label = "awm002-evb:green:tx";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ rx {
	+ label = "awm002-evb:green:rx";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "awm002-evb:green:wps";
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset_wps {
	+ label = "reset_wps";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ mode {
	+ label = "mode";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/AWM002.dtsi
	===================================================================
	--- sys/gnu/dts/mips/AWM002.dtsi
	+++ /dev/null
	@@ -1,76 +0,0 @@
	-#include "rt5350.dtsi"
	-
	-/ {
	- compatible = "AWM002", "ralink,rt5350-soc";
	- model = "AsiaRF AWM002";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- ld1 {
	- label = "awm002:green:ld1";
	- gpios = <&gpio0 0 1>;
	- };
	-
	- ld2 {
	- label = "awm002:green:ld2";
	- gpios = <&gpio0 1 1>;
	- };
	- };
	-};
	-
	-&spi0 {
	- status = "okay";
	-
	- m25p80: m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- reg = <0>;
	- compatible = "jedec,spi-nor";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&esw {
	- mediatek,portmap = <0x3f>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/AWM003-EVB.dts
	===================================================================
	--- sys/gnu/dts/mips/AWM003-EVB.dts
	+++ /dev/null
	@@ -1,64 +0,0 @@
	-/dts-v1/;
	-
	-#include "AWM002-8M.dtsi"
	-
	-/ {
	- compatible = "AWM003", "ralink,rt5350-soc";
	- model = "AsiaRF AWM003 EVB";
	-
	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x4000000>;
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- tx {
	- label = "awm003-evb:green:tx";
	- gpios = <&gpio0 15 1>;
	- };
	-
	- rx {
	- label = "awm003-evb:green:rx";
	- gpios = <&gpio0 16 1>;
	- };
	-
	- wps {
	- label = "awm003-evb:green:wps";
	- gpios = <&gpio0 21 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 20 1>;
	- linux,code = <0x32>;
	- };
	- };
	-};
	-
	-&m25p80 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l6405d";
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/AWUSFREE1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/AWUSFREE1.dts
	@@ -0,0 +1,164 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * 1. Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * 2. Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in the
	+ * documentation and/or other materials provided with the distribution.
	+ * 3. Neither the names of the copyright holders nor the names of any
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "alfa-network,awusfree1", "mediatek,mt7628an-soc";
	+ model = "ALFA Network AWUSFREE1";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ system {
	+ label = "awusfree1:orange:system";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "awusfree1:blue:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+};
	+
	+&ehci {
	+ status = "disabled";
	+};
	+
	+&esw {
	+ mediatek,portdisable = <0x1e>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x2e>;
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "disabled";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "p0led_an", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+
	+ ext_lna {
	+ ralink,group = "uart1";
	+ ralink,function = "sw_r";
	+ };
	+
	+ ext_pa {
	+ ralink,group = "i2s";
	+ ralink,function = "antenna";
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x1000>;
	+ };
	+
	+ partition@031000 {
	+ label = "config";
	+ reg = <0x31000 0xf000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ mediatek,mtd-eeprom = <&factory 0x0>;
	+};
	Index: sys/gnu/dts/mips/ArcherC20i.dts
	===================================================================
	--- sys/gnu/dts/mips/ArcherC20i.dts
	+++ sys/gnu/dts/mips/ArcherC20i.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "tplink,c20i", "ralink,mt7620a-soc";
	model = "TP-Link Archer C20i";

	chosen {
	@@ -12,20 +15,57 @@

	gpio-leds {
	compatible = "gpio-leds";
	+ lan {
	+ label = "c20i:blue:lan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+ usb {
	+ label = "c20i:blue:usb";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+ wps {
	+ label = "c20i:blue:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+ wan {
	+ label = "c20i:blue:wan";
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	+ };
	+ wlan {
	+ label = "c20i:blue:wlan";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	};

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	+ gpio-keys {
	+ compatible = "gpio-keys";
	#address-cells = <1>;
	#size-cells = <0>;
	- poll-interval = <20>;
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ reset_wps {
	+ label = "reset_wps";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	&gpio2 {
	status = "okay";
	};

	+&gpio3 {
	+ status = "okay";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -34,7 +74,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -73,7 +112,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
	ralink,function = "gpio";
	};
	};
	@@ -81,7 +120,6 @@

	&ethernet {
	pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&rom 0xf100>;
	mediatek,portmap = "wllll";
	};
	@@ -110,7 +148,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&radio 32768>;
	- mediatek,2ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ArcherC20v1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherC20v1.dts
	@@ -0,0 +1,188 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "tplink,c20-v1", "ralink,mt7620a-soc";
	+ model = "TP-Link Archer C20 v1";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "c20-v1:blue:lan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "c20-v1:blue:power";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ default-state = "keep";
	+ };
	+
	+ usb {
	+ label = "c20-v1:blue:usb";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "c20-v1:blue:wan";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wan_orange {
	+ label = "c20-v1:orange:wan";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wlan5g {
	+ label = "c20-v1:blue:wlan5g";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan2g {
	+ label = "c20-v1:blue:wlan2g";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "c20-v1:blue:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7a0000>;
	+ };
	+
	+ partition@7c0000 {
	+ label = "config";
	+ reg = <0x7c0000 0x10000>;
	+ read-only;
	+ };
	+
	+ rom: partition@7d0000 {
	+ label = "rom";
	+ reg = <0x7d0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7e0000 {
	+ label = "romfile";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ mtd-mac-address = <&rom 0xf100>;
	+ mediatek,portmap = "wllll";
	+ };
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&radio 0>;
	+ mtd-mac-address = <&rom 0xf100>;
	+ mtd-mac-address-increment = <(-2)>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&rom 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/ArcherC20v4.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherC20v4.dts
	@@ -0,0 +1,101 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "tplink,c20-v4", "mediatek,mt7628an-soc";
	+ model = "TP-Link Archer C20 v4";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "c20-v4:green:lan";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "c20-v4:green:power";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "c20-v4:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_orange {
	+ label = "c20-v4:orange:wan";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan5g {
	+ label = "c20-v4:green:wlan5g";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan2g {
	+ label = "c20-v4:green:wlan2g";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "c20-v4:green:wps";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ mtd-mac-address-increment = <(-2)>;
	+};
	+
	+&ethernet {
	+ mediatek,portmap = "wllll";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x28000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&factory 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/ArcherC50.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherC50.dts
	@@ -0,0 +1,187 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "tplink,c50", "ralink,mt7620a-soc";
	+ model = "TP-Link Archer C50";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "c50:green:lan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "c50:green:power";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ default-state = "on";
	+ };
	+
	+ usb {
	+ label = "c50:green:usb";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "c50:green:wan";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_orange {
	+ label = "c50:orange:wan";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan5g {
	+ label = "c50:green:wlan5g";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan2g {
	+ label = "c50:green:wlan2g";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "c50:green:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ }; };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7a0000>;
	+ };
	+
	+ partition@7c0000 {
	+ label = "config";
	+ reg = <0x7c0000 0x10000>;
	+ read-only;
	+ };
	+
	+ rom: partition@7d0000 {
	+ label = "rom";
	+ reg = <0x7d0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7e0000 {
	+ label = "romfile";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ mtd-mac-address = <&rom 0xf100>;
	+ mediatek,portmap = "wllll";
	+ };
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&radio 0>;
	+ mtd-mac-address = <&rom 0xf100>;
	+ mtd-mac-address-increment = <(-2)>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 32768>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&rom 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/ArcherC50V3.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherC50V3.dts
	@@ -0,0 +1,94 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,c50-v3", "mediatek,mt7628an-soc";
	+ model = "TP-Link Archer C50 v3";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "c50-v3:green:lan";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "c50-v3:green:power";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "c50-v3:green:wan";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_orange {
	+ label = "c50-v3:orange:wan";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "c50-v3:green:wlan2g";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan5 {
	+ label = "c50-v3:green:wlan5g";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "c50-v3:green:wps";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an",
	+ "p3led_an", "p4led_an", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x28000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&factory 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/ArcherMR200.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherMR200.dts
	@@ -0,0 +1,194 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,mr200", "ralink,mt7620a-soc";
	+ model = "TP-Link Archer MR200";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "mr200:white:lan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "mr200:white:wan";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "mr200:white:power";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ 4g {
	+ label = "mr200:white:4g";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "mr200:white:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ signal1 {
	+ label = "mr200:white:signal1";
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ signal2 {
	+ label = "mr200:white:signal2";
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ signal3 {
	+ label = "mr200:white:signal3";
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ signal4 {
	+ label = "mr200:white:signal4";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "mr200:white:wlan";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys {
	+ compatible = "gpio-keys";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ power_usb {
	+ gpio-export,name = "power_usb1";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7b0000>;
	+ };
	+
	+ rom: partition@7d0000 {
	+ label = "rom";
	+ reg = <0x7d0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7e0000 {
	+ label = "romfile";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&rom 0xf100>;
	+ mediatek,portmap = "llll";
	+ };
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&radio 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 32768>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/BC2.dts
	===================================================================
	--- sys/gnu/dts/mips/BC2.dts
	+++ sys/gnu/dts/mips/BC2.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "BC2", "ralink,rt3052-soc";
	+ compatible = "nexaira,bc2", "ralink,rt3052-soc";
	model = "NexAira BC2";

	cfi@1f000000 {
	@@ -43,7 +46,7 @@

	usb {
	label = "bc2:blue:usb";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -55,8 +58,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 17 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/BOCCO.dts
	===================================================================
	--- sys/gnu/dts/mips/BOCCO.dts
	+++ sys/gnu/dts/mips/BOCCO.dts
	@@ -2,29 +2,12 @@

	#include "mt7620a.dtsi"

	-/ {
	- compatible = "ralink,mt7620a-soc";
	- model = "Planex CS-QR10";
	-
	- sound {
	- compatible = "mediatek,mt7620-audio-wm8960";
	- model = "mt7620-wm8960";
	- i2s-controller = <&i2s>;
	- audio-routing =
	- "Ext Spk", "SPK_LP",
	- "Ext Spk", "SPK_LN",
	- "Ext Spk", "SPK_RP",
	- "Ext Spk", "SPK_RN";
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	- power {
	- label = "cs-qr10:red:power";
	- gpios = <&gpio1 4 1>;
	- };
	- };
	+/ {
	+ compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
	+ model = "YUKAI Engineering BOCCO";

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -32,16 +15,46 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- s1 {
	+ reset {
	label = "reset";
	- gpios = <&gpio1 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;

	+ s1 {
	+ gpio-export,name = "rec";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
	+ };
	s2 {
	- label = "wps";
	- gpios = <&gpio1 3 1>;
	- linux,code = <0x211>;
	+ gpio-export,name = "play";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ sound {
	+ compatible = "simple-audio-card";
	+ simple-audio-card,name = "Audio-I2S";
	+ simple-audio-card,format = "i2s";
	+ simple-audio-card,bitclock-master = <&dailink0_master>;
	+ simple-audio-card,frame-master = <&dailink0_master>;
	+ simple-audio-card,widgets =
	+ "Headphone", "Headphones";
	+ simple-audio-card,routing =
	+ "Headphones", "HP_L",
	+ "Headphones", "HP_R";
	+ simple-audio-card,mclk-fs = <256>;
	+
	+ simple-audio-card,cpu {
	+ sound-dai = <&i2s>;
	+ };
	+
	+ dailink0_master: simple-audio-card,codec {
	+ sound-dai = <&codec>;
	};
	};
	};
	@@ -64,9 +77,18 @@

	&i2c {
	status = "okay";
	+
	+ codec: wm8960@1a {
	+ #sound-dai-cells = <0>;
	+ compatible = "wlf,wm8960";
	+ reg = <0x1a>;
	+
	+ wlf,shared-lrclk;
	+ };
	};

	&i2s {
	+ #sound-dai-cells = <0>;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pcm_i2s_pins>;
	@@ -80,7 +102,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -122,10 +143,6 @@
	ralink,group = "spi refclk", "rgmii1";
	ralink,function = "gpio";
	};
	- wdt {
	- ralink,group = "wdt";
	- ralink,function = "wdt refclk";
	- };
	};
	};

	@@ -140,22 +157,6 @@
	ralink,port4 = "ephy";
	};

	-&sdhci {
	- status = "okay";
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-
	-&pcie {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/BR-6425.dts
	===================================================================
	--- sys/gnu/dts/mips/BR-6425.dts
	+++ /dev/null
	@@ -1,71 +0,0 @@
	-/dts-v1/;
	-
	-#include "rt3050.dtsi"
	-
	-/ {
	- compatible = "BR-6425", "ralink,rt3052-soc";
	- model = "Edimax BR-6425";
	-
	- cfi@1f000000 {
	- compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	- bank-width = <2>;
	- device-width = <2>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "br-6425:green:power";
	- gpios = <&gpio0 9 1>;
	- };
	-
	- wlan {
	- label = "br-6425:orange:wlan";
	- gpios = <&gpio0 14 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	- };
	-
	- rfkill {
	- label = "RFKILL switch";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0xf7>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	-/* mtd-mac-address = <&factory 0x4>; */
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	-};
	-
	-&wmac {
	-/* ralink,mtd-eeprom = <&factory 0>; */
	-};
	Index: sys/gnu/dts/mips/BR-6475ND.dts
	===================================================================
	--- sys/gnu/dts/mips/BR-6475ND.dts
	+++ sys/gnu/dts/mips/BR-6475ND.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "BR-6475ND", "ralink,rt3883-soc";
	+ compatible = "edimax,br-6475nd", "ralink,rt3883-soc";
	model = "Edimax BR-6475nD";

	gpio-keys-polled {
	@@ -14,15 +17,15 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	rfkill {
	label = "rfkill";
	- gpios = <&gpio0 9 1>;
	- linux,input-type = <5>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,input-type = <EV_SW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};

	@@ -31,17 +34,17 @@

	power {
	label = "br-6475nd:green:power";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "br-6475nd:amber:wlan";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	wlan_5ghz {
	label = "br-6475nd:amber:wlan_5ghz";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -80,17 +83,12 @@
	reg = <0x00070000 0x00790000>;
	label = "firmware";
	};
	-
	- partition@170000 {
	- reg = <0x00270000 0x00590000>;
	- label = "rootfs";
	- };
	};

	rtl8367 {
	compatible = "realtek,rtl8367";
	- gpio-sda = <&gpio0 5 0>;
	- gpio-sck = <&gpio0 4 0>;
	+ gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
	realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
	};

	@@ -105,7 +103,7 @@
	usb {
	gpio-export,name="usb";
	gpio-export,output=<0>;
	- gpios = <&gpio0 19 0>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};
	*/
	@@ -162,11 +160,11 @@
	pci-bridge@1 {
	status = "okay";

	- wmac@0,0 {
	+ wifi@0,0 {
	+ compatible = "pci0,0";
	+ reg = <0x10000 0 0 0 0>;
	ralink,5ghz = <0>;
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/BROADWAY.dts
	===================================================================
	--- sys/gnu/dts/mips/BROADWAY.dts
	+++ sys/gnu/dts/mips/BROADWAY.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "BROADWAY", "ralink,rt3052-soc";
	+ compatible = "hauppauge,broadway", "ralink,rt3052-soc";
	model = "Hauppauge Broadway";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	diskmounted {
	label = "broadway:red:diskmounted";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps_active {
	label = "broadway:red:wps_active";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	factory {
	label = "Factory Reset button";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/C108.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/C108.dts
	@@ -0,0 +1,177 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "hnet,c108", "ralink,mt7620a-soc";
	+ model = "HNET C108";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ power_modem {
	+ gpio-export,name = "power_modem";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ sdcard {
	+ label = "c108:green:sdcard";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ modem_green {
	+ label = "c108:green:modem";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ modem_red {
	+ label = "c108:red:modem";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan_red {
	+ label = "c108:red:lan";
	+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ lan_green {
	+ label = "c108:green:lan";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ en25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "spi refclk", "ephy";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/CARAMBOLA.dts
	===================================================================
	--- sys/gnu/dts/mips/CARAMBOLA.dts
	+++ sys/gnu/dts/mips/CARAMBOLA.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "CARAMBOLA", "ralink,rt3050-soc";
	+ compatible = "8devices,carambola", "ralink,rt3050-soc";
	model = "8devices Carambola";

	chosen {
	@@ -44,7 +47,7 @@

	i2c-gpio {
	compatible = "i2c-gpio";
	- gpios = <&gpio0 1 0 &gpio0 2 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
	i2c-gpio,delay-us = <10>;
	};
	};
	Index: sys/gnu/dts/mips/CF-WR800N.dts
	===================================================================
	--- sys/gnu/dts/mips/CF-WR800N.dts
	+++ sys/gnu/dts/mips/CF-WR800N.dts
	@@ -2,8 +2,11 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "cf-wr800n", "ralink,mt7620n-soc";
	+ compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
	model = "Comfast CF-WR800N";

	chosen {
	@@ -15,17 +18,17 @@

	ethernet {
	label = "cf-wr800n:white:ethernet";
	- gpios = <&gpio2 4 1>;
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "cf-wr800n:white:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "cf-wr800n:white:wps";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +40,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -67,7 +70,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/CS-QR10.dts
	===================================================================
	--- sys/gnu/dts/mips/CS-QR10.dts
	+++ sys/gnu/dts/mips/CS-QR10.dts
	@@ -2,27 +2,19 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
	model = "Planex CS-QR10";

	- sound {
	- compatible = "mediatek,mt7620-audio-wm8960";
	- model = "mt7620-wm8960";
	- i2s-controller = <&i2s>;
	- audio-routing =
	- "Ext Spk", "SPK_LP",
	- "Ext Spk", "SPK_LN",
	- "Ext Spk", "SPK_RP",
	- "Ext Spk", "SPK_RN";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	power {
	label = "cs-qr10:red:power";
	- gpios = <&gpio1 4 1>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -34,14 +26,14 @@

	s1 {
	label = "reset";
	- gpios = <&gpio1 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	s2 {
	label = "wps";
	- gpios = <&gpio1 3 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -80,7 +72,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/CY-SWR1100.dts
	===================================================================
	--- sys/gnu/dts/mips/CY-SWR1100.dts
	+++ sys/gnu/dts/mips/CY-SWR1100.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "CY-SWR1100", "ralink,rt3883-soc";
	+ compatible = "samsung,cy-swr1100", "ralink,rt3883-soc";
	model = "Samsung CY-SWR1100";

	nor-flash@1c000000 {
	@@ -50,8 +53,8 @@

	rtl8367 {
	compatible = "realtek,rtl8367";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
	};

	@@ -63,14 +66,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 6 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 3 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -79,12 +82,12 @@

	wps {
	label = "cy-swr1100:blue:wps";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "cy-swr1100:blue:usb";
	- gpios = <&gpio1 1 1>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -125,11 +128,11 @@
	pci-bridge@1 {
	status = "okay";

	- wmac@0,0 {
	+ wifi@0,0 {
	+ compatible = "pci0,0";
	+ reg = <0x10000 0 0 0 0>;
	ralink,5ghz = <0>;
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ ralink,mtd-eeprom = <&factory 0x2000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/D105.dts
	===================================================================
	--- sys/gnu/dts/mips/D105.dts
	+++ sys/gnu/dts/mips/D105.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "D105", "ralink,rt3050-soc";
	+ compatible = "huawei,d105", "ralink,rt3050-soc";
	model = "Huawei D105";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	power {
	label = "d105:red:power";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "d105:green:usb";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/D240.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/D240.dts
	@@ -0,0 +1,179 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "sanlinking,d240", "ralink,mt7620a-soc";
	+ model = "Sanlinking Technologies D240";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ power_mpcie2 {
	+ gpio-export,name = "power_mpcie2";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power_mpcie1 {
	+ gpio-export,name = "power_mpcie1";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "d240:blue:power";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usb {
	+ label = "d240:blue:usb";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ air {
	+ label = "d240:blue:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ en25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/DAP-1350.dts
	===================================================================
	--- sys/gnu/dts/mips/DAP-1350.dts
	+++ sys/gnu/dts/mips/DAP-1350.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DAP-1350", "ralink,rt3052-soc";
	+ compatible = "dlink,dap-1350", "ralink,rt3052-soc";
	model = "D-Link DAP-1350";

	chosen {
	@@ -53,17 +56,17 @@

	power {
	label = "dap-1350:blue:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "dap-1350:red:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dap-1350:blue:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -75,26 +78,26 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	rt {
	label = "rt";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DAP-1522-A1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DAP-1522-A1.dts
	@@ -0,0 +1,139 @@
	+/dts-v1/;
	+
	+#include "rt2880.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dap-1522-a1", "ralink,rt2880-soc";
	+ model = "D-Link DAP-1522 A1";
	+
	+ cfi@bc400000 {
	+ compatible = "cfi-flash";
	+ reg = <0xbc400000 0x800000>;
	+ bank-width = <2>;
	+ device-width = <2>;
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+
	+ partition@0 {
	+ label = "uboot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ factory: partition@30000 {
	+ label = "factory";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0x3a0000>;
	+ };
	+ };
	+
	+ rtl8366s {
	+ compatible = "realtek,rtl8366s";
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <100>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ ap {
	+ label = "ap";
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	+ };
	+
	+ bridge {
	+ label = "bridge";
	+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	+ linux,input-type = <EV_SW>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wps {
	+ label = "dap-1522-a1:blue:wps";
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ ap {
	+ label = "dap-1522-a1:blue:ap";
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ sta {
	+ label = "dap-1522-a1:red:sta";
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status {
	+ label = "dap-1522-a1:blue:status";
	+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartlite", "pci";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x2004>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ phy-mode = "mii";
	+ reg = <0>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0x2000>;
	+};
	Index: sys/gnu/dts/mips/DB-WRT01.dts
	===================================================================
	--- sys/gnu/dts/mips/DB-WRT01.dts
	+++ sys/gnu/dts/mips/DB-WRT01.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,db-wrt01", "ralink,mt7620a-soc";
	model = "Planex DB-WRT01";

	gpio-leds {
	@@ -11,7 +14,7 @@

	power {
	label = "db-wrt01:orange:power";
	- gpios = <&gpio1 1 1>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	s1 {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -41,7 +44,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DCH-M225.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DCH-M225.dts
	@@ -0,0 +1,180 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
	+ model = "D-Link DCH-M225";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <100>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "dch-m225:green:power";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status {
	+ label = "dch-m225:red:status";
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ sound {
	+ compatible = "simple-audio-card";
	+ simple-audio-card,name = "Audio-I2S";
	+ simple-audio-card,format = "i2s";
	+ simple-audio-card,bitclock-master = <&dailink0_master>;
	+ simple-audio-card,frame-master = <&dailink0_master>;
	+ simple-audio-card,widgets =
	+ "Headphone", "Headphones";
	+ simple-audio-card,routing =
	+ "Headphones", "HP_L",
	+ "Headphones", "HP_R";
	+ simple-audio-card,mclk-fs = <256>;
	+ simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+
	+ simple-audio-card,cpu {
	+ sound-dai = <&i2s>;
	+ };
	+
	+ dailink0_master: simple-audio-card,codec {
	+ sound-dai = <&codec>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+
	+ codec: wm8960@1a {
	+ #sound-dai-cells = <0>;
	+ compatible = "wlf,wm8960";
	+ reg = <0x1a>;
	+
	+ wlf,shared-lrclk;
	+ };
	+};
	+
	+&i2s {
	+ #sound-dai-cells = <0>;
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&mdio_refclk_pins>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <80000000>;
	+ m25p,fast-read;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x4000>;
	+ read-only;
	+ };
	+
	+ factory: partition@34000 {
	+ label = "factory";
	+ reg = <0x34000 0x4000>;
	+ read-only;
	+ };
	+
	+ nvram: partition@38000 {
	+ label = "nvram";
	+ reg = <0x38000 0x8000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "devconf";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "upgrade_rec";
	+ reg = <0x50000 0x100000>;
	+ read-only;
	+ };
	+
	+ partition@150000 {
	+ label = "firmware";
	+ reg = <0x150000 0x6b0000>;
	+ };
	+ };
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "rgmii1";
	+ ralink,function = "gpio";
	+ };
	+
	+ gpio_i2s {
	+ ralink,group = "uartf";
	+ ralink,function = "gpio i2s";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&gsw {
	+ ralink,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	Index: sys/gnu/dts/mips/DCS-930.dts
	===================================================================
	--- sys/gnu/dts/mips/DCS-930.dts
	+++ sys/gnu/dts/mips/DCS-930.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DCS-930", "ralink,rt3050-soc";
	+ compatible = "dlink,dcs-930", "ralink,rt3050-soc";
	model = "D-Link DCS-930";

	cfi@1f000000 {
	@@ -53,17 +56,17 @@

	wifi {
	label = "dcs-930:red:alert";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "dcs-930:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dcs-930:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -75,14 +78,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DCS-930L-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DCS-930L-B1.dts
	+++ sys/gnu/dts/mips/DCS-930L-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DCS-930L-B1", "ralink,rt5350-soc";
	+ compatible = "dlink,dcs-930l-b1", "ralink,rt5350-soc";
	model = "D-Link DCS-930L B1";

	gpio-leds {
	@@ -11,12 +14,12 @@

	power {
	label = "dcs-930l-b1:red:power";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dcs-930l-b1:blue:wps";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 20 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -48,7 +51,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-300-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-300-B1.dts
	+++ sys/gnu/dts/mips/DIR-300-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-300-B1", "ralink,rt3050-soc";
	+ compatible = "dlink,dir-300-b1", "ralink,rt3050-soc";
	model = "D-Link DIR-300 B1";

	cfi@1f000000 {
	@@ -46,14 +49,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -62,27 +65,27 @@

	status {
	label = "dir-300-b1:amber:status";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status2 {
	label = "dir-300-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "dir-300-b1:amber:wan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-300-b1:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-300-b1:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DIR-300-B7.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-300-B7.dts
	+++ sys/gnu/dts/mips/DIR-300-B7.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-300-B7", "ralink,rt5350-soc";
	+ compatible = "dlink,dir-300-b7", "ralink,rt5350-soc";
	model = "D-Link DIR-300 B7";

	gpio-leds {
	@@ -11,12 +14,12 @@

	status {
	label = "dir-300-b7:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-300-b7:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -48,7 +51,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-320-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-320-B1.dts
	+++ sys/gnu/dts/mips/DIR-320-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-320-B1", "ralink,rt5350-soc";
	+ compatible = "dlink,dir-320-b1", "ralink,rt5350-soc";
	model = "D-Link DIR-320 B1";

	gpio-leds {
	@@ -11,17 +14,17 @@

	status {
	label = "dir-320-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "dir-320-b1:green:usb";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-320-b1:green:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -51,13 +54,13 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	root_hub {
	gpio-export,name = "root_hub";
	gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -70,7 +73,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-600-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-600-B1.dts
	+++ sys/gnu/dts/mips/DIR-600-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-600-B1", "ralink,rt3050-soc";
	+ compatible = "dlink,dir-600-b1", "ralink,rt3050-soc";
	model = "D-Link DIR-600 B1";

	cfi@1f000000 {
	@@ -46,14 +49,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -62,27 +65,27 @@

	status {
	label = "dir-600-b1:amber:status";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status2 {
	label = "dir-600-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "dir-600-b1:amber:wan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-600-b1:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-600-b1:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DIR-600-B2.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-600-B2.dts
	+++ /dev/null
	@@ -1,105 +0,0 @@
	-/dts-v1/;
	-
	-#include "rt3050.dtsi"
	-
	-/ {
	- compatible = "DIR-600-B2", "ralink,rt3050-soc";
	- model = "D-Link DIR-600 B2";
	-
	- cfi@1f000000 {
	- compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	- bank-width = <2>;
	- device-width = <2>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- devdata: partition@30000 {
	- label = "devdata";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "devconf";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- wps {
	- label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "dir-600-b2:amber:status";
	- gpios = <&gpio0 8 1>;
	- };
	-
	- status2 {
	- label = "dir-600-b2:green:status";
	- gpios = <&gpio0 9 1>;
	- };
	-
	- wan {
	- label = "dir-600-b2:amber:wan";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- wan2 {
	- label = "dir-600-b2:green:wan";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- wps {
	- label = "dir-600-b2:blue:wps";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	-};
	Index: sys/gnu/dts/mips/DIR-610-A1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-610-A1.dts
	+++ sys/gnu/dts/mips/DIR-610-A1.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-610-A1", "ralink,rt5350-soc";
	+ compatible = "dlink,dir-610-a1", "ralink,rt5350-soc";
	model = "D-Link DIR-610 A1";

	gpio-leds {
	@@ -11,12 +14,12 @@

	status {
	label = "dir-610-a1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-610-a1:green:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -48,7 +51,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-615-D.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-615-D.dts
	+++ sys/gnu/dts/mips/DIR-615-D.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-615-D", "ralink,rt3050-soc";
	+ compatible = "dlink,dir-615-d1", "ralink,rt3050-soc";
	model = "D-Link DIR-615 D";

	cfi@1f000000 {
	@@ -46,14 +49,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -62,27 +65,27 @@

	status {
	label = "dir-615-d:amber:status";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status2 {
	label = "dir-615-d:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "dir-615-d:amber:wan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-615-d:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-615-d:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DIR-615-H1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-615-H1.dts
	+++ sys/gnu/dts/mips/DIR-615-H1.dts
	@@ -2,8 +2,11 @@

	#include "rt3352.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-615-H1", "ralink,rt3352-soc";
	+ compatible = "dlink,dir-615-h1", "ralink,rt3352-soc";
	model = "D-Link DIR-615 H1";

	gpio-leds {
	@@ -11,27 +14,27 @@

	status {
	label = "dir-615-h1:amber:status";
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	status2 {
	label = "dir-615-h1:green:status";
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};

	wan {
	label = "dir-615-h1:amber:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-615-h1:green:wan";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-615-h1:blue:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,14 +46,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -97,21 +99,13 @@
	ralink,group = "i2c", "jtag", "uartf";
	ralink,function = "gpio";
	};
	-
	- rgmii {
	- ralink,group = "rgmii";
	- ralink,function = "rgmii";
	- };
	-
	- mdio {
	- ralink,group = "mdio";
	- ralink,function = "mdio";
	- };
	};
	};

	&ethernet {
	mtd-mac-address = <&factory 0x28>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii_pins &mdio_pins>;
	};

	&esw {
	Index: sys/gnu/dts/mips/DIR-620-A1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-620-A1.dts
	+++ sys/gnu/dts/mips/DIR-620-A1.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-620-A1", "ralink,rt3050-soc";
	+ compatible = "dlink,dir-620-a1", "ralink,rt3050-soc";
	model = "D-Link DIR-620 A1";

	cfi@1f000000 {
	@@ -46,14 +49,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -62,32 +65,32 @@

	status {
	label = "dir-620-a1:amber:status";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status2 {
	label = "dir-620-a1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "dir-620-a1:amber:wan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-620-a1:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-620-a1:blue:wps";
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};

	wps2 {
	label = "dir-620-a1:amber:wps";
	- gpios = <&gpio0 11 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DIR-620-D1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-620-D1.dts
	+++ sys/gnu/dts/mips/DIR-620-D1.dts
	@@ -2,8 +2,11 @@

	#include "rt3352.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-620-D1", "ralink,rt3352-soc";
	+ compatible = "dlink,dir-620-d1", "ralink,rt3352-soc";
	model = "D-Link DIR-620 D1";

	gpio-leds {
	@@ -11,12 +14,12 @@

	status {
	label = "dir-620-d1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "dir-620-d1:green:wifi";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -42,7 +45,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -76,21 +78,13 @@
	ralink,group = "i2c", "jtag", "uartf";
	ralink,function = "gpio";
	};
	-
	- rgmii {
	- ralink,group = "rgmii";
	- ralink,function = "rgmii";
	- };
	-
	- mdio {
	- ralink,group = "mdio";
	- ralink,function = "mdio";
	- };
	};
	};

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii_pins &mdio_pins>;
	};

	&esw {
	Index: sys/gnu/dts/mips/DIR-645.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-645.dts
	+++ sys/gnu/dts/mips/DIR-645.dts
	@@ -2,14 +2,17 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-645", "ralink,rt3883-soc";
	+ compatible = "dlink,dir-645", "ralink,rt3883-soc";
	model = "D-Link DIR-645";

	rtl8367b {
	compatible = "realtek,rtl8367b";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
	};

	@@ -21,14 +24,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 9 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 14 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -37,12 +40,12 @@

	inet {
	label = "dir-645:green:inet";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-645:green:wps";
	- gpios = <&gpio1 2 0>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -53,7 +56,7 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio1 6 0>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -70,7 +73,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <25000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-810L.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-810L.dts
	+++ sys/gnu/dts/mips/DIR-810L.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
	model = "D-Link DIR-810L";
	@@ -14,14 +17,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};

	@@ -30,17 +33,17 @@

	power {
	label = "dir-810l:green:power";
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};

	wan {
	label = "dir-810l:orange:wan";
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};

	status {
	label = "dir-810l:orange:power";
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-860L-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-860L-B1.dts
	+++ sys/gnu/dts/mips/DIR-860L-B1.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
	+ compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
	model = "D-Link DIR-860L B1";

	memory@0 {
	@@ -20,22 +23,22 @@

	power {
	label = "dir-860l-b1:orange:power";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "dir-860l-b1:green:power";
	- gpios = <&gpio0 15 1>;
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	};

	net {
	label = "dir-860l-b1:orange:net";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	net2 {
	label = "dir-860l-b1:green:net";
	- gpios = <&gpio0 16 1>;
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -44,6 +47,18 @@
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	};
	};

	@@ -55,8 +70,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -103,7 +118,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&radio 0x2000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -112,7 +127,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&radio 0>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DUZUN-DM06.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DUZUN-DM06.dts
	@@ -0,0 +1,143 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "duzun,dm06", "mediatek,mt7628an-soc";
	+ model = "DuZun DM06";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <100>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+
	+ sound {
	+ compatible = "simple-audio-card";
	+ simple-audio-card,name = "Audio-I2S";
	+ simple-audio-card,format = "i2s";
	+ simple-audio-card,bitclock-master = <&dailink0_master>;
	+ simple-audio-card,frame-master = <&dailink0_master>;
	+ simple-audio-card,widgets =
	+ "Headphone", "Headphones";
	+ simple-audio-card,routing =
	+ "Headphones", "HP_L",
	+ "Headphones", "HP_R";
	+ simple-audio-card,mclk-fs = <256>;
	+
	+ simple-audio-card,cpu {
	+ sound-dai = <&i2s>;
	+ };
	+
	+ dailink0_master: simple-audio-card,codec {
	+ sound-dai = <&codec>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "uart1";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+
	+ codec: wm8960@1a {
	+ #sound-dai-cells = <0>;
	+ compatible = "wlf,wm8960";
	+ reg = <0x1a>;
	+
	+ wlf,shared-lrclk;
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3>;
	+ mediatek,portdisable = <0x3c>;
	+};
	+
	+&i2s {
	+ #sound-dai-cells = <0>;
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2s_pins>, <&refclk_pins>;
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <60000000>;
	+ m25p,chunked-io = <32>;
	+ m25p,fast-read;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/DWR-116-A1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DWR-116-A1.dts
	@@ -0,0 +1,104 @@
	+/dts-v1/;
	+
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dwr-116-a1", "ralink,mt7620n-soc";
	+ model = "D-Link DWR-116 A1/A2";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "dwr-116-a1:green:status";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wifi {
	+ label = "dwr-116-a1:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <50000000>;
	+
	+ partition@0 {
	+ label = "jboot";
	+ reg = <0x0 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@10000 {
	+ label = "firmware";
	+ reg = <0x10000 0x7e0000>;
	+ };
	+
	+ config: partition@7f0000 {
	+ label = "config";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mediatek,portmap = "llllw";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+};
	Index: sys/gnu/dts/mips/DWR-512-B.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DWR-512-B.dts
	@@ -0,0 +1,139 @@
	+/dts-v1/;
	+
	+#include "rt5350.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dwr-512-b", "ralink,rt5350-soc";
	+ model = "D-Link DWR-512 B";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ sms {
	+ label = "dwr-512-b:green:sms";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+ status {
	+ label = "dwr-512-b:green:status";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+ 2g {
	+ label = "dwr-512-b:green:2g";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+ 3g {
	+ label = "dwr-512-b:green:3g";
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	+ };
	+ sstrengthr {
	+ label = "dwr-512-b:red:sigstrength";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	+ };
	+ sstrengthg {
	+ label = "dwr-512-b:green:sigstrength";
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ slic_int {
	+ gpio-export,name = "slic_int";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+ modem3g_enable {
	+ gpio-export,name = "modem3g_enable";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ mx25l6405d@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <30000000>;
	+ m25p,fast-read;
	+
	+ partition@0 {
	+ label = "jboot";
	+ reg = <0x0 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@10000 {
	+ label = "firmware";
	+ reg = <0x10000 0x7e0000>;
	+ };
	+
	+ config: partition@7f0000 {
	+ label = "config";
	+ reg = <0x7f0000 0x10000>;
	+ };
	+ };
	+};
	+
	+&spi1 {
	+ status = "okay";
	+
	+ spidev@1 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "siliconlabs,si3210";
	+
	+ reg = <0>;
	+ spi-max-frequency = <1000000>;
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&config 0xe07e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&config 0xe08a>;
	+ ralink,led-polarity = <1>;
	+ mtd-mac-address = <&config 0xe07e>;
	+};
	Index: sys/gnu/dts/mips/DWR-921-C1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DWR-921-C1.dts
	@@ -0,0 +1,144 @@
	+/dts-v1/;
	+
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dwr-921-c1", "ralink,mt7620n-soc";
	+ model = "D-Link DWR-921 C1";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ sms {
	+ label = "dwr-921-c1:green:sms";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan {
	+ label = "dwr-921-c1:green:lan";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ sstrengthg {
	+ label = "dwr-921-c1:green:sigstrength";
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ sstrengthr {
	+ label = "dwr-921-c1:red:sigstrength";
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ 4g {
	+ label = "dwr-921-c1:green:4g";
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ 3g {
	+ label = "dwr-921-c1:green:3g";
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi {
	+ label = "dwr-921-c1:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ lte_modem_enable {
	+ gpio-export,name = "lte_modem_enable";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "jboot";
	+ reg = <0x0 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@10000 {
	+ label = "firmware";
	+ reg = <0x10000 0xfe0000>;
	+ };
	+
	+ config: partition@ff0000 {
	+ label = "config";
	+ reg = <0xff0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ port@4 {
	+ status = "okay";
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "spi refclk", "i2c", "ephy", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/E1700.dts
	===================================================================
	--- sys/gnu/dts/mips/E1700.dts
	+++ sys/gnu/dts/mips/E1700.dts
	@@ -12,6 +12,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "linksys,e1700", "ralink,mt7620a-soc";
	model = "Linksys E1700";
	@@ -24,14 +27,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -40,12 +43,12 @@

	power {
	label = "e1700:green:power";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "e1700:green:wps";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -58,7 +61,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ESR-9753.dts
	===================================================================
	--- sys/gnu/dts/mips/ESR-9753.dts
	+++ sys/gnu/dts/mips/ESR-9753.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ESR-9753", "ralink,rt3052-soc";
	+ compatible = "engenius,esr-9753", "ralink,rt3052-soc";
	model = "Senao / EnGenius ESR-9753";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	power {
	label = "esr-9753:orange:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "esr-9753:orange:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/EW1200.dts
	===================================================================
	--- sys/gnu/dts/mips/EW1200.dts
	+++ sys/gnu/dts/mips/EW1200.dts
	@@ -2,27 +2,24 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG3526";
	+ compatible = "afoundry,ew1200", "mediatek,mt7621-soc";
	+ model = "EW1200";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ reg = <0x0 0x8000000>;
	};

	chosen {
	- bootargs = "console=ttyS0,115200";
	+ bootargs = "console=ttyS0,57600";
	};

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};
	};
	@@ -35,8 +32,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -44,8 +41,13 @@
	compatible = "gpio-leds";

	status {
	- label = "zbt-wg3526:green:status";
	- gpios = <&gpio0 24 1>;
	+ label = "ew1200:green:run";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usb {
	+ label = "ew1200:green:usb";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -62,8 +64,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -97,8 +99,8 @@
	mt76@0,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -106,8 +108,8 @@
	mt76@1,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	@@ -119,7 +121,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/EX2700.dts
	===================================================================
	--- sys/gnu/dts/mips/EX2700.dts
	+++ sys/gnu/dts/mips/EX2700.dts
	@@ -12,8 +12,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "netgear,ex2700", "ralink,mt7620a-soc";
	model = "Netgear EX2700";

	chosen {
	@@ -25,38 +28,38 @@

	power_g {
	label = "ex2700:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	default-state = "on";
	};

	power_r {
	label = "ex2700:red:power";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	device_g {
	label = "ex2700:green:device";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	device_r {
	label = "ex2700:red:device";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	router_g {
	label = "ex2700:green:router";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	router_r {
	label = "ex2700:red:router";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "ex2700:green:wps";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -68,14 +71,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -96,7 +99,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -129,15 +131,13 @@
	};

	&wmac {
	+ mtd-mac-address = <&art 0x6>;
	ralink,mtd-eeprom = <&art 0x1000>;
	};

	&pinctrl {
	state_default: pinctrl0 {
	default {
	- // spi refclk: pins 37, 38, 39
	- // uartf: pins 8, 9, 10, 11, 12, 13, 14
	- // i2c: pins 1, 2
	ralink,group = "i2c", "uartf", "spi refclk";
	ralink,function = "gpio";
	};
	Index: sys/gnu/dts/mips/EX3700.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/EX3700.dts
	@@ -0,0 +1,162 @@
	+/* This file is released into the public domain */
	+
	+/dts-v1/;
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+#include "mt7620a.dtsi"
	+
	+/ {
	+ compatible = "netgear,ex3700", "ralink,mt7620a-soc";
	+ model = "Netgear EX3700/EX3800";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power_g {
	+ label = "ex3700:green:power";
	+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
	+ default-state = "on";
	+ };
	+
	+ power_a {
	+ label = "ex3700:amber:power";
	+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
	+ default-state = "off";
	+ };
	+
	+ router_g {
	+ label = "ex3700:green:router";
	+ gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router_r {
	+ label = "ex3700:red:router";
	+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ device_g {
	+ label = "ex3700:green:device";
	+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ device_r {
	+ label = "ex3700:red:device";
	+ gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "ex3700:green:wps";
	+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x790000>;
	+ };
	+
	+ partition@7e0000 {
	+ label = "board_data";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7f0000 {
	+ label = "nvram";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0 >;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "rgmii2", "spi refclk";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/F5D8235_V1.dts
	===================================================================
	--- sys/gnu/dts/mips/F5D8235_V1.dts
	+++ sys/gnu/dts/mips/F5D8235_V1.dts
	@@ -2,15 +2,22 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "F5D8235_V1", "ralink,rt2880-soc";
	+ compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
	model = "Belkin F5D8235 v1";

	+ pci@440000 {
	+ status = "ok";
	+ };
	+
	cfi@1f000000 {
	compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	+ reg = <0xbc400000 0x800000>;
	bank-width = <2>;
	device-width = <2>;
	#address-cells = <1>;
	@@ -35,15 +42,56 @@
	};

	partition@50000 {
	- label = "linux";
	- reg = <0x50000 0x3b0000>;
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};

	rtl8366s {
	compatible = "realtek,rtl8366s";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+
	+ realtek,initvals = <
	+ 0x0242 0x02BF
	+ 0x0245 0x02BF
	+ 0x0248 0x02BF
	+ 0x024B 0x02BF
	+ 0x024E 0x02BF
	+ 0x0251 0x02BF
	+ 0x0254 0x0A3F
	+ 0x0256 0x0A3F
	+ 0x0258 0x0A3F
	+ 0x025A 0x0A3F
	+ 0x025C 0x0A3F
	+ 0x025E 0x0A3F
	+ 0x0263 0x007C
	+ 0x0100 0x0004
	+ 0xBE5B 0x3500
	+ 0x800E 0x200F
	+ 0xBE1D 0x0F00
	+ 0x8001 0x5011
	+ 0x800A 0xA2F4
	+ 0x800B 0x17A3
	+ 0xBE4B 0x17A3
	+ 0xBE41 0x5011
	+ 0xBE17 0x2100
	+ 0x8000 0x8304
	+ 0xBE40 0x8304
	+ 0xBE4A 0xA2F4
	+ 0x800C 0xA8D5
	+ 0x8014 0x5500
	+ 0x8015 0x0004
	+ 0xBE4C 0xA8D5
	+ 0xBE59 0x0008
	+ 0xBE09 0x0E00
	+ 0xBE36 0x1036
	+ 0xBE37 0x1036
	+ 0x800D 0x00FF
	+ 0xBE4D 0x00FF
	+ >;
	+
	+ realtek,green-ethernet-features;
	};

	gpio-keys-polled {
	@@ -54,28 +102,83 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	gpio-leds {
	compatible = "gpio-leds";

	+ internet {
	+ label = "f5d8235-v1:blue:internet";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet2 {
	+ label = "f5d8235-v1:amber:internet";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ modem {
	+ label = "f5d8235-v1:blue:modem";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ modem2 {
	+ label = "f5d8235-v1:amber:modem";
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router {
	+ label = "f5d8235-v1:blue:router";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ };
	+
	storage {
	label = "f5d8235-v1:blue:storage";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	storage2 {
	- label = "f5d8235-v1:orange:storage";
	- gpios = <&gpio0 8 1>;
	+ label = "f5d8235-v1:amber:storage";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ security {
	+ label = "f5d8235-v1:blue:security";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ security2 {
	+ label = "f5d8235-v1:amber:security";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wired {
	+ label = "f5d8235-v1:blue:wired";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wired2 {
	+ label = "f5d8235-v1:amber:wired";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless {
	+ label = "f5d8235-v1:blue:wireless";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless2 {
	+ label = "f5d8235-v1:amber:wireless";
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -87,7 +190,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "spi", "i2c", "jtag", "mdio", "uartlite";
	ralink,function = "gpio";
	};
	};
	@@ -102,10 +205,7 @@
	};
	};

	-/* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */
	-/*&wmac {
	+&wmac {
	status = "okay";
	- ralink,mtd-eeprom = <&u-boot 0x40000>;
	+ ralink,mtd-eeprom = <&factory 0x0>;
	};
	-*/
	-
	Index: sys/gnu/dts/mips/F5D8235_V2.dts
	===================================================================
	--- sys/gnu/dts/mips/F5D8235_V2.dts
	+++ sys/gnu/dts/mips/F5D8235_V2.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "F5D8235_V2", "ralink,rt3052-soc";
	+ compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
	model = "Belkin F5D8235 v2";

	cfi@1f000000 {
	@@ -37,9 +40,9 @@
	};

	rtl8366rb {
	- compatible = "rtl8366rb";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ compatible = "realtek,rtl8366rb";
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

	gpio-leds {
	@@ -47,47 +50,47 @@

	internet {
	label = "f5d8235-v2:blue:internet";
	- gpios = <&gpio0 5 1>;
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	};

	internet2 {
	label = "f5d8235-v2:amber:internet";
	- gpios = <&gpio0 6 1>;
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	};

	modem {
	label = "f5d8235-v2:blue:modem";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	modem2 {
	label = "f5d8235-v2:amber:modem";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "f5d8235-v2:blue:router";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	storage {
	label = "f5d8235-v2:blue:storage";
	- gpios = <&gpio0 23 1>;
	+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
	};

	storage2 {
	label = "f5d8235-v2:amber:storage";
	- gpios = <&gpio0 22 1>;
	+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
	};

	security {
	label = "f5d8235-v2:blue:security";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	security2 {
	label = "f5d8235-v2:amber:security";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/F7C027.dts
	===================================================================
	--- sys/gnu/dts/mips/F7C027.dts
	+++ sys/gnu/dts/mips/F7C027.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "F7C027", "ralink,rt5350-soc";
	+ compatible = "belkin,f7c027", "ralink,rt5350-soc";
	model = "Belkin F7C027";

	gpio-leds {
	@@ -11,22 +14,22 @@

	status {
	label = "f7c027:blue:status";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "f7c027:blue:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	orange {
	label = "f7c027:orange:status";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	relay {
	label = "f7c027:device:relay";
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -37,21 +40,21 @@
	poll-interval = <20>;

	top {
	- label = "top";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ label = "restore";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	power {
	label = "power";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};

	sensor {
	label = "sensor";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	@@ -64,7 +67,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l12805d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/FIREWRT.dts
	===================================================================
	--- sys/gnu/dts/mips/FIREWRT.dts
	+++ sys/gnu/dts/mips/FIREWRT.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "firefly,firewrt", "mediatek,mt7621-soc";
	model = "Firefly FireWRT";

	memory@0 {
	@@ -20,7 +23,7 @@

	power {
	label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +35,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	power {
	label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	};
	};
	};
	@@ -56,8 +59,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -92,7 +95,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -101,7 +104,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/FONERA20N.dts
	===================================================================
	--- sys/gnu/dts/mips/FONERA20N.dts
	+++ sys/gnu/dts/mips/FONERA20N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "FONERA20N", "ralink,rt3052-soc";
	+ compatible = "fon,fonera20n", "ralink,rt3052-soc";
	model = "La Fonera 2.0N";

	cfi@1f000000 {
	@@ -43,17 +46,17 @@

	wifi {
	label = "fonera20n:orange:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "fonera20n:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "fonera20n:orange:usb";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -65,15 +68,15 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	switch {
	label = "switch";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0xf7>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/FREESTATION5.dts
	===================================================================
	--- sys/gnu/dts/mips/FREESTATION5.dts
	+++ sys/gnu/dts/mips/FREESTATION5.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "FREESTATION5", "ralink,rt3050-soc";
	+ compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
	model = "ARC FreeStation5";

	chosen {
	@@ -50,7 +53,7 @@
	poe {
	gpio-export,name = "poe-passthrough";
	gpio-export,output = <1>; // OUT_INIT_HIGH
	- gpios = <&gpio0 11 1>; // GPIO 11, ACTIVE_LOW
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; // GPIO 11, ACTIVE_LOW
	};
	};

	@@ -61,17 +64,17 @@
	// not present in the Freestation5 device.
	wifi {
	label = "freestation5:unknown:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	powerg {
	label = "freestation5:unknown:powerg";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "freestation5:unknown:usb";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/GB-PC1.dts
	===================================================================
	--- sys/gnu/dts/mips/GB-PC1.dts
	+++ sys/gnu/dts/mips/GB-PC1.dts
	@@ -2,9 +2,12 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Firefly FireWRT";
	+ compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc";
	+ model = "GB-PC1";

	memory@0 {
	device_type = "memory";
	@@ -15,31 +18,40 @@
	bootargs = "console=ttyS0,57600";
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ system {
	+ label = "gb-pc1:green:system";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	};

	- power {
	- label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ status {
	+ label = "gb-pc1:green:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan1 {
	+ label = "gb-pc1:green:lan1";
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2 {
	+ label = "gb-pc1:green:lan2";
	+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -56,8 +68,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -79,31 +91,18 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};

	+&cpuclock {
	+ compatible = "fixed-clock";
	+ clock-frequency = <900000000>;
	+};
	+
	&pcie {
	status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	};

	&ethernet {
	@@ -113,7 +112,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2";
	+ ralink,group = "jtag", "rgmii2", "uart3", "wdt";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/GB-PC2.dts
	===================================================================
	--- sys/gnu/dts/mips/GB-PC2.dts
	+++ sys/gnu/dts/mips/GB-PC2.dts
	@@ -2,9 +2,12 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG3526";
	+ compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc";
	+ model = "GB-PC2";

	memory@0 {
	device_type = "memory";
	@@ -12,19 +15,7 @@
	};

	chosen {
	- bootargs = "console=ttyS0,115200";
	- };
	-
	- palmbus: palmbus@1E000000 {
	- i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	- status = "okay";
	- };
	+ bootargs = "console=ttyS0,57600";
	};

	gpio-keys-polled {
	@@ -35,23 +26,52 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	gpio-leds {
	compatible = "gpio-leds";

	+ system {
	+ label = "gb-pc2:green:system";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	status {
	- label = "zbt-wg3526:green:status";
	- gpios = <&gpio0 24 1>;
	+ label = "gb-pc2:green:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	+
	+ lan1 {
	+ label = "gb-pc2:green:lan1";
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2 {
	+ label = "gb-pc2:green:lan2";
	+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan3-yellow {
	+ label = "gb-pc2:yellow:lan3";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan3-green {
	+ label = "gb-pc2:green:lan3";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	};
	};

	&sdhci {
	status = "okay";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	};

	&spi0 {
	@@ -62,8 +82,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -85,31 +105,18 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};

	+&cpuclock {
	+ compatible = "fixed-clock";
	+ clock-frequency = <900000000>;
	+};
	+
	&pcie {
	status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	};

	&ethernet {
	@@ -119,8 +126,9 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "jtag", "rgmii3", "uart3", "wdt";
	ralink,function = "gpio";
	};
	};
	};
	+
	Index: sys/gnu/dts/mips/GL-MT300A.dts
	===================================================================
	--- sys/gnu/dts/mips/GL-MT300A.dts
	+++ sys/gnu/dts/mips/GL-MT300A.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "GL-MT300A", "ralink,mt7620a-soc";
	+ compatible = "glinet,gl-mt300a", "ralink,mt7620a-soc";
	model = "GL-MT300A";

	chosen {
	@@ -15,22 +18,22 @@

	wan {
	label = "gl-mt300a:wan";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "gl-mt300a:lan";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "gl-mt300a:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "gl-mt300a:usb";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	};
	@@ -42,20 +45,20 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	BTN_0 {
	label = "BTN_0";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	BTN_1 {
	label = "BTN_1";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -82,9 +85,8 @@
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "w25q128";
	+ compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -129,29 +131,14 @@
	};

	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "wllll";
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};

	-&pcie {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-};
	-
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	Index: sys/gnu/dts/mips/GL-MT300N-V2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/GL-MT300N-V2.dts
	@@ -0,0 +1,143 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/{
	+ compatible = "glinet,gl-mt300n-v2", "ralink,mt7620an-soc";
	+ model = "GL-MT300N-V2";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "gl-mt300n-v2:green:power";
	+ default-state = "on";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "gl-mt300n-v2:blue:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "gl-mt300n-v2:red:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ BTN_0 {
	+ label = "BTN_0";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+
	+ BTN_1 {
	+ label = "BTN_1";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usb {
	+ gpio-export,name = "usb";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&uart1 {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/GL-MT300N.dts
	===================================================================
	--- sys/gnu/dts/mips/GL-MT300N.dts
	+++ sys/gnu/dts/mips/GL-MT300N.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "GL-MT300N", "ralink,mt7620a-soc";
	+ compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
	model = "GL-MT300N";

	chosen {
	@@ -15,17 +18,17 @@

	wan {
	label = "gl-mt300n:wan";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "gl-mt300n:lan";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "gl-mt300n:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	};
	@@ -37,20 +40,20 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	BTN_0 {
	label = "BTN_0";
	- gpios = <&gpio2 2 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	BTN_1 {
	label = "BTN_1";
	- gpios = <&gpio2 3 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -77,9 +80,8 @@
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "w25q128";
	+ compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -121,26 +123,13 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "wllll";
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};

	-&pcie {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-};
	-
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	Index: sys/gnu/dts/mips/GL-MT750.dts
	===================================================================
	--- sys/gnu/dts/mips/GL-MT750.dts
	+++ sys/gnu/dts/mips/GL-MT750.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "GL-MT750", "ralink,mt7620a-soc";
	+ compatible = "glinet,gl-mt750", "ralink,mt7620a-soc";
	model = "GL-MT750";

	chosen {
	@@ -15,17 +18,17 @@

	wan {
	label = "gl-mt750:wan";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "gl-mt750:lan";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "gl-mt750:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	};
	@@ -37,20 +40,20 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	BTN_0 {
	label = "BTN_0";
	- gpios = <&gpio2 2 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	BTN_1 {
	label = "BTN_1";
	- gpios = <&gpio2 3 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -77,9 +80,8 @@
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "w25q128";
	+ compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -124,10 +126,8 @@
	};

	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "llllw";
	+ mediatek,portmap = "llllw";
	};

	&wmac {
	@@ -142,7 +142,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HC5661.dts
	===================================================================
	--- sys/gnu/dts/mips/HC5661.dts
	+++ sys/gnu/dts/mips/HC5661.dts
	@@ -1,9 +1,9 @@
	/dts-v1/;

	-#include "HC5XXX.dtsi"
	+#include "HC5X61.dtsi"

	/ {
	- compatible = "HC5661", "ralink,mt7620a-soc";
	+ compatible = "hiwifi,hc5661", "hiwifi,hc5x61", "ralink,mt7620a-soc";
	model = "HiWiFi HC5661";

	gpio-leds {
	@@ -11,22 +11,22 @@

	system {
	label = "hc5661:blue:system";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "hc5661:blue:internet";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	label = "hc5661:blue:wlan2g";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "hc5661:blue:wlan5g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HC5661A.dts
	===================================================================
	--- sys/gnu/dts/mips/HC5661A.dts
	+++ sys/gnu/dts/mips/HC5661A.dts
	@@ -1,11 +1,41 @@
	-#include "mt7620a.dtsi"
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	+ compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
	+ model = "HiWiFi HC5661A";
	+
	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- gpio-keys-polled {
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ system {
	+ label = "hc5661a:blue:system";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
	+ };
	+ internet {
	+ label = "hc5661a:blue:internet";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ };
	+ wlan2g {
	+ label = "hc5661a:blue:wlan2g";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-keys {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	#size-cells = <0>;
	@@ -13,41 +43,21 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	+};

	- gpio_export {
	- compatible = "gpio-export";
	- #size-cells = <0>;
	-
	- usbpower {
	- gpio-export,name = "usbpower";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 13 0>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "refclk", "wled_an";
	+ ralink,function = "gpio";
	};
	};
	};

	-&sysc {
	- ralink,gpiomux = "i2c", "jtag";
	- ralink,uartmux = "gpio";
	- ralink,wdtmux = <1>;
	-};
	-
	-&gpio0 {
	- status = "okay";
	-};
	-
	-&gpio2 {
	- status = "okay";
	-};
	-
	-&gpio3 {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -58,14 +68,16 @@
	reg = <0>;
	linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	reg = <0x0 0x30000>;
	+ read-only;
	};

	partition@30000 {
	- label = "u-boot-env";
	+ label = "hw_panic";
	reg = <0x30000 0x10000>;
	read-only;
	};
	@@ -73,67 +85,39 @@
	factory: partition@40000 {
	label = "factory";
	reg = <0x40000 0x10000>;
	+ read-only;
	};

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xf80000>;
	+ reg = <0x50000 0xf70000>;
	};

	- partition@fd0000 {
	- label = "hwf_config";
	- reg = <0xfd0000 0x10000>;
	+ partition@fc0000 {
	+ label = "oem";
	+ reg = <0xfc0000 0x20000>;
	+ read-only;
	};

	bdinfo: partition@fe0000 {
	label = "bdinfo";
	reg = <0xfe0000 0x10000>;
	+ read-only;
	};

	partition@ff0000 {
	label = "backup";
	reg = <0xff0000 0x10000>;
	+ read-only;
	};
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	};

	-&sdhci {
	- status = "okay";
	-};
	-
	&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&pcie {
	status = "okay";
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uartf", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	- };
	-};
	Index: sys/gnu/dts/mips/HC5761.dts
	===================================================================
	--- sys/gnu/dts/mips/HC5761.dts
	+++ sys/gnu/dts/mips/HC5761.dts
	@@ -1,9 +1,9 @@
	/dts-v1/;

	-#include "HC5XXX.dtsi"
	+#include "HC5X61.dtsi"

	/ {
	- compatible = "HC5761", "ralink,mt7620a-soc";
	+ compatible = "hiwifi,hc5761", "hiwifi,hc5x61", "ralink,mt7620a-soc";
	model = "HiWiFi HC5761";

	gpio-leds {
	@@ -11,22 +11,22 @@

	system {
	label = "hc5761:blue:system";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "hc5761:blue:internet";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	label = "hc5761:blue:wlan2g";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "hc5761:blue:wlan5g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HC5861.dts
	===================================================================
	--- sys/gnu/dts/mips/HC5861.dts
	+++ sys/gnu/dts/mips/HC5861.dts
	@@ -1,9 +1,9 @@
	/dts-v1/;

	-#include "HC5XXX.dtsi"
	+#include "HC5X61.dtsi"

	/ {
	- compatible = "HC5861", "ralink,mt7620a-soc";
	+ compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
	model = "HiWiFi HC5861";

	gpio-leds {
	@@ -11,27 +11,27 @@

	system {
	label = "hc5861:blue:system";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	label = "hc5861:blue:wlan2g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "hc5861:blue:internet";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "hc5861:blue:wlan5g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	turbo {
	label = "hc5861:blue:turbo";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -42,13 +42,13 @@
	usbpower {
	gpio-export,name = "usbpower";
	gpio-export,output = <0>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	sdpower {
	gpio-export,name = "sdpower";
	gpio-export,output = <0>;
	- gpios = <&gpio0 8 0>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HC5962.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/HC5962.dts
	@@ -0,0 +1,148 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "hiwifi,hc5962", "mediatek,mt7621-soc";
	+ model = "HiWiFi HC5962";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "hc5962:white:status";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ system {
	+ label = "hc5962:red:system";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@80000 {
	+ label = "debug";
	+ reg = <0x80000 0x80000>;
	+ read-only;
	+ };
	+
	+ factory: partition@100000 {
	+ label = "factory";
	+ reg = <0x100000 0x40000>;
	+ read-only;
	+ };
	+
	+ partition@140000 {
	+ label = "kernel";
	+ reg = <0x140000 0x200000>;
	+ };
	+
	+ partition@340000 {
	+ label = "ubi";
	+ reg = <0x340000 0x1E00000>;
	+ };
	+
	+ partition@2140000 {
	+ label = "hw_panic";
	+ reg = <0x2140000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@21c0000 {
	+ label = "bdinfo";
	+ reg = <0x21c0000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@2240000 {
	+ label = "backup";
	+ reg = <0x2240000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@22c0000 {
	+ label = "overly";
	+ reg = <0x22c0000 0x1000000>;
	+ };
	+
	+ partition@32c0000 {
	+ label = "firmware_backup";
	+ reg = <0x32c0000 0x2000000>;
	+ };
	+
	+ partition@52c0000 {
	+ label = "oem";
	+ reg = <0x52c0000 0x200000>;
	+ };
	+
	+ partition@54c0000 {
	+ label = "opt";
	+ reg = <0x54c0000 0x2ac0000>;
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart3", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/HC5X61.dtsi
	===================================================================
	--- sys/gnu/dts/mips/HC5X61.dtsi
	+++ sys/gnu/dts/mips/HC5X61.dtsi
	@@ -1,6 +1,11 @@
	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	+ compatible = "hiwifi,hc5x61", "ralink,mt7620a-soc";
	+
	chosen {
	bootargs = "console=ttyS0,115200";
	};
	@@ -13,8 +18,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -25,7 +30,7 @@
	usbpower {
	gpio-export,name = "usbpower";
	gpio-export,output = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -56,7 +61,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -118,6 +122,8 @@

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};

	&pcie {
	@@ -130,10 +136,5 @@
	ralink,group = "uartf", "wled", "nd_sd";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};
	Index: sys/gnu/dts/mips/HG255D.dts
	===================================================================
	--- sys/gnu/dts/mips/HG255D.dts
	+++ sys/gnu/dts/mips/HG255D.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HG255D", "ralink,rt3052-soc";
	+ compatible = "huawei,hg255d", "ralink,rt3052-soc";
	model = "HuaWei HG255D";

	cfi@1f000000 {
	@@ -49,32 +52,32 @@

	power {
	label = "hg255d:green:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "hg255d:green:internet";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "hg255d:green:wlan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "hg255d:green:usb";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "hg255d:green:wps";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	voice {
	label = "hg255d:green:voice";
	- gpios = <&gpio0 5 1>;
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -86,20 +89,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 4 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	rfkill {
	label = "rfkill";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HLKRM04.dts
	===================================================================
	--- sys/gnu/dts/mips/HLKRM04.dts
	+++ sys/gnu/dts/mips/HLKRM04.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HLKRM04", "ralink,rt5350-soc";
	+ compatible = "hilink,hlk-rm04", "ralink,rt5350-soc";
	model = "HILINK HLK-RM04";

	memory@0 {
	@@ -24,13 +27,13 @@
	/* I2C_I2C_SD */
	gpio-export,name = "hlk-rm04:gpio0";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 1 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	};
	gpio2 {
	/* I2C_I2C_SCLK */
	gpio-export,name = "hlk-rm04:gpio1";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 2 0>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -41,13 +44,13 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	wps {
	label = "wps";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -64,7 +67,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/HPM.dts
	===================================================================
	--- sys/gnu/dts/mips/HPM.dts
	+++ sys/gnu/dts/mips/HPM.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HPM", "ralink,rt3883-soc";
	+ compatible = "omnima,hpm", "ralink,rt3883-soc";
	model = "Omnima HPM";

	chosen {
	@@ -18,8 +21,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 14 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -28,32 +31,32 @@

	power {
	label = "hpm:orange:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "hpm:green:status";
	- gpios = <&gpio0 21 1>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	};

	eth {
	label = "hpm:green:eth";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	eth2 {
	label = "hpm:red:eth";
	- gpios = <&gpio0 18 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "hpm:green:wifi";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "hpm:red:wifi";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -65,13 +68,13 @@
	usb0 {
	gpio-export,name = "usb0";
	gpio-export,output = <1>;
	- gpios = <&gpio0 2 0>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

	usb1 {
	gpio-export,name = "usb1";
	gpio-export,output = <1>;
	- gpios = <&gpio0 1 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HT-TM02.dts
	===================================================================
	--- sys/gnu/dts/mips/HT-TM02.dts
	+++ sys/gnu/dts/mips/HT-TM02.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HT-TM02", "ralink,rt5350-soc";
	+ compatible = "hootoo,ht-tm02", "ralink,rt5350-soc";
	model = "HooToo HT-TM02";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wlan {
	label = "ht-tm02:blue:wlan";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "ht-tm02:green:lan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,15 +31,15 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	modeswitch {
	label = "modeswitch";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/HW550-3G.dts
	===================================================================
	--- sys/gnu/dts/mips/HW550-3G.dts
	+++ sys/gnu/dts/mips/HW550-3G.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HW550-3G", "ralink,rt3052-soc";
	+ compatible = "aztech,hw550-3g", "ralink,rt3052-soc";
	model = "Aztech HW550-3G";

	cfi@1f000000 {
	@@ -43,22 +46,22 @@

	usb {
	label = "hw550-3g:green:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "hw550-3g:green:3g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "hw550-3g:green:status";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "hw550-3g:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,20 +73,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	connect {
	label = "connect";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0xda>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_CONNECT>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/IP2202.dts
	===================================================================
	--- sys/gnu/dts/mips/IP2202.dts
	+++ sys/gnu/dts/mips/IP2202.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "IP2202", "ralink,rt3052-soc";
	+ compatible = "poray,ip2202", "ralink,rt3052-soc";
	model = "Poray IP2202";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	run {
	label = "ip2202:green:run";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	net {
	label = "ip2202:amber:net";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/JHR-N805R.dts
	===================================================================
	--- sys/gnu/dts/mips/JHR-N805R.dts
	+++ sys/gnu/dts/mips/JHR-N805R.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "JHR-N805R", "ralink,rt3050-soc";
	+ compatible = "jcg,jhr-n805r", "ralink,rt3050-soc";
	model = "JCG JHR-N805R";

	gpio-leds {
	@@ -11,7 +14,7 @@

	system {
	label = "jhr-n805r:blue:system";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -46,7 +49,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/JHR-N825R.dts
	===================================================================
	--- sys/gnu/dts/mips/JHR-N825R.dts
	+++ sys/gnu/dts/mips/JHR-N825R.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "JHR-N825R", "ralink,rt3052-soc";
	+ compatible = "jcg,jhr-n825r", "ralink,rt3052-soc";
	model = "JCG JHR-N825R";

	cfi@1f000000 {
	@@ -42,7 +45,7 @@
	compatible = "gpio-leds";
	system {
	label = "jhr-n825r:red:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,8 +56,8 @@
	poll-interval = <20>;
	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/JHR-N926R.dts
	===================================================================
	--- sys/gnu/dts/mips/JHR-N926R.dts
	+++ sys/gnu/dts/mips/JHR-N926R.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "JHR-N926R", "ralink,rt3052-soc";
	+ compatible = "jcg,jhr-n926r", "ralink,rt3052-soc";
	model = "JCG JHR-N926R";

	cfi@1f000000 {
	@@ -43,22 +46,22 @@

	wlan1 {
	label = "jhr-n926r:red:wlan";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	wlan2 {
	label = "jhr-n926r:yellow:wlan";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};

	wlan3 {
	label = "jhr-n926r:green:wlan";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};

	system {
	label = "jhr-n926r:blue:system";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -69,19 +72,19 @@
	display_data {
	gpio-export,name = "display_data";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	display_clock {
	gpio-export,name = "display_clock";
	gpio-export,output = <1>;
	- gpios = <&gpio0 8 0>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	};

	display_blank {
	gpio-export,name = "display_blank";
	gpio-export,output = <1>;
	- gpios = <&gpio0 11 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -93,14 +96,14 @@

	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wlan {
	label = "wlan";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/K2G.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/K2G.dts
	@@ -0,0 +1,139 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "phicomm,k2g", "ralink,mt7620a-soc";
	+ model = "Phicomm K2G";
	+
	+ aliases {
	+ serial0 = &uartlite;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ led_blue: blue {
	+ label = "k2g:blue:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ yellow {
	+ label = "k2g:yellow:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ red {
	+ label = "k2g:red:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <24000000>;
	+
	+ partitions {
	+ compatible = "fixed-partitions";
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+
	+ u-boot@0 {
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ u-boot-env@30000 {
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: factory@40000 {
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ permanent_config@50000 {
	+ reg = <0x50000 0x50000>;
	+ read-only;
	+ };
	+
	+ firmware@a0000 {
	+ reg = <0xa0000 0x760000>;
	+ };
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+
	+ port@5 {
	+ status = "okay";
	+ phy-handle = <&phy5>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	Index: sys/gnu/dts/mips/K2P.dts
	===================================================================
	--- sys/gnu/dts/mips/K2P.dts
	+++ sys/gnu/dts/mips/K2P.dts
	@@ -2,9 +2,12 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "STORYLiNK SAP-G3200U3";
	+ compatible = "phicomm,k2p", "mediatek,mt7621-soc";
	+ model = "Phicomm K2P";

	memory@0 {
	device_type = "memory";
	@@ -18,9 +21,19 @@
	gpio-leds {
	compatible = "gpio-leds";

	- usb {
	- label = "sap-g3200u3:green:usb";
	- gpios = <&gpio0 13 1>;
	+ stat_r {
	+ label = "k2p:red:status";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ stat_y {
	+ label = "k2p:yellow:status";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ stat_b {
	+ label = "k2p:blue:status";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +45,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 16 1>;
	- linux,code = <0x198>;
	- };
	-
	- rfkill {
	- label = "rfkill";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -52,8 +59,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -63,13 +70,7 @@

	partition@30000 {
	label = "u-boot-env";
	- reg = <0x30000 0x1000>;
	- read-only;
	- };
	-
	- partition@31000 {
	- label = "config";
	- reg = <0x31000 0xf000>;
	+ reg = <0x30000 0x10000>;
	read-only;
	};

	@@ -80,8 +81,14 @@
	};

	partition@50000 {
	+ label = "permanent_config";
	+ reg = <0x50000 0x50000>;
	+ read-only;
	+ };
	+
	+ partition@a0000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0xa0000 0xf60000>;
	};
	};
	};
	@@ -93,17 +100,7 @@
	mt76@0,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0>;
	};
	};
	};
	@@ -115,7 +112,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "uart3", "jtag";
	+ ralink,group = "i2c", "jtag";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/LINKIT7688.dts
	===================================================================
	--- sys/gnu/dts/mips/LINKIT7688.dts
	+++ sys/gnu/dts/mips/LINKIT7688.dts
	@@ -2,8 +2,11 @@

	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	+ compatible = "mediatek,linkit-smart-7688", "mediatek,mt7628an-soc";
	model = "MediaTek LinkIt Smart 7688";

	chosen {
	@@ -29,9 +32,8 @@
	compatible = "gpio-leds";

	wifi {
	- label = "mediatek:orange:wifi";
	- gpios = <&wgpio 0 0>;
	- default-state = "on";
	+ label = "linkit-smart-7688:orange:wifi";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,18 +45,10 @@

	wps {
	label = "reset";
	- gpios = <&gpio1 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	-
	- wgpio: gpio-wifi {
	- compatible = "mediatek,gpio-wifi";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- gpio-controller;
	- #gpio-cells = <2>;
	- };
	};

	&pinctrl {
	@@ -64,11 +58,6 @@
	ralink,function = "gpio";
	};

	- perst {
	- ralink,group = "perst";
	- ralink,function = "gpio";
	- };
	-
	refclk {
	ralink,group = "refclk";
	ralink,function = "gpio";
	@@ -84,14 +73,9 @@
	ralink,function = "gpio";
	};

	- wled_kn {
	- ralink,group = "wled_kn";
	- ralink,function = "gpio";
	- };
	-
	wled_an {
	ralink,group = "wled_an";
	- ralink,function = "wled_an";
	+ ralink,function = "gpio";
	};

	wdt {
	@@ -116,7 +100,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <40000000>;
	m25p,chunked-io = <31>;

	Index: sys/gnu/dts/mips/M2M.dts
	===================================================================
	--- sys/gnu/dts/mips/M2M.dts
	+++ sys/gnu/dts/mips/M2M.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "M2M", "ralink,rt5350-soc";
	+ compatible = "intenso,memory2move", "ralink,rt5350-soc";
	model = "Intenso Memory 2 Move";

	chosen {
	@@ -15,12 +18,12 @@

	wifi {
	label = "m2m:blue:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "m2m:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +35,14 @@

	power {
	label = "power";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x116>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -52,7 +55,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/M3.dts
	===================================================================
	--- sys/gnu/dts/mips/M3.dts
	+++ sys/gnu/dts/mips/M3.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "M3", "ralink,rt5350-soc";
	+ compatible = "poray,m3", "ralink,rt5350-soc";
	model = "Poray M3";

	gpio-leds {
	@@ -11,7 +14,7 @@

	status {
	label = "m3:blue:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,15 +26,15 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 17 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -44,7 +47,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/M4-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/M4-4M.dts
	+++ sys/gnu/dts/mips/M4-4M.dts
	@@ -1,32 +1,10 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "M4.dtsi"

	/ {
	- compatible = "M4", "ralink,rt5350-soc";
	- model = "Poray M4";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "m4:blue:status";
	- gpios = <&gpio0 9 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	- };
	+ compatible = "poray,m4-4m", "poray,m4", "ralink,rt5350-soc";
	+ model = "Poray M4 (4M)";
	};

	&spi0 {
	@@ -37,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "pm25lq032";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -64,29 +41,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/M4-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/M4-8M.dts
	+++ sys/gnu/dts/mips/M4-8M.dts
	@@ -1,32 +1,10 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "M4.dtsi"

	/ {
	- compatible = "M4", "ralink,rt5350-soc";
	- model = "Poray M4";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "m4:blue:status";
	- gpios = <&gpio0 9 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	- };
	+ compatible = "poray,m4-8m", "poray,m4", "ralink,rt5350-soc";
	+ model = "Poray M4 (8M)";
	};

	&spi0 {
	@@ -37,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -64,34 +41,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/M4.dtsi
	===================================================================
	--- sys/gnu/dts/mips/M4.dtsi
	+++ sys/gnu/dts/mips/M4.dtsi
	@@ -1,8 +1,19 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PX-4885", "ralink,rt5350-soc";
	- model = "7Links PX-4885";
	+ compatible = "poray,m4", "ralink,rt5350-soc";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "m4:blue:status";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+ };

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -12,22 +23,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- orange {
	- label = "px-4885:orange:wifi";
	- gpios = <&gpio0 18 1>;
	- };
	-
	- blue {
	- label = "px-4885:blue:storage";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -42,13 +39,23 @@
	};

	&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	+ mtd-mac-address = <&factory 0x4>;
	};

	&esw {
	- mediatek,portmap = <0x3f>;
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <1>;
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	};
	Index: sys/gnu/dts/mips/MAC1200RV2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/MAC1200RV2.dts
	@@ -0,0 +1,96 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
	+ model = "Mercury MAC1200R v2";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x2000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ status {
	+ label = "mac1200rv2:green:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x1d800>;
	+ };
	+
	+ factory: partition@0x1d800 {
	+ label = "factory_info";
	+ reg = <0x1d800 0x800>;
	+ read-only;
	+ };
	+
	+ art: partition@0x1e000 {
	+ label = "art";
	+ reg = <0x1e000 0x2000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "config";
	+ reg = <0x20000 0x10000>;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot2";
	+ reg = <0x30000 0x10000>;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0x7c0000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ mtd-mac-address = <&factory 0xd>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&art 0x0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&art 0x1000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/MINIEMBPLUG.dts
	===================================================================
	--- sys/gnu/dts/mips/MINIEMBPLUG.dts
	+++ sys/gnu/dts/mips/MINIEMBPLUG.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MINIEMBPLUG", "ralink,rt5350-soc";
	+ compatible = "omnima,miniembplug", "ralink,rt5350-soc";
	model = "Omnima MiniEMBPlug";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wlan {
	label = "miniembplug:red:wlan";
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};

	mobile {
	label = "miniembplug:green:mobile";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,26 +31,26 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	mode-one {
	label = "mode1";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	mode-two {
	label = "mode2";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -73,7 +76,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MINIEMBWIFI.dts
	===================================================================
	--- sys/gnu/dts/mips/MINIEMBWIFI.dts
	+++ sys/gnu/dts/mips/MINIEMBWIFI.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MINIEMBWIFI", "ralink,rt3052-soc";
	+ compatible = "omnima,miniembwifi", "ralink,rt3052-soc";
	model = "Omnima MiniEMBWiFi";

	gpio-leds {
	@@ -11,12 +14,12 @@

	status {
	label = "miniembwifi:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "miniembwifi:green:wlan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	Index: sys/gnu/dts/mips/MIR3G.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/MIR3G.dts
	@@ -0,0 +1,195 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "xiaomi,mir3g", "mediatek,mt7621-soc";
	+ model = "Xiaomi Mi Router 3G";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200n8";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status_red {
	+ label = "mir3g:red:status";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status_blue {
	+ label = "mir3g:blue:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status_yellow {
	+ label = "mir3g:yellow:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_amber {
	+ label = "mir3g:amber:wan";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan1_amber {
	+ label = "mir3g:amber:lan1";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2_amber {
	+ label = "mir3g:amber:lan2";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usbpower {
	+ gpio-export,name = "usbpower";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "Bootloader";
	+ reg = <0x0 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@80000 {
	+ label = "Config";
	+ reg = <0x80000 0x40000>;
	+ };
	+
	+ partition@c0000 {
	+ label = "Bdata";
	+ reg = <0xc0000 0x40000>;
	+ read-only;
	+ };
	+
	+ factory: partition@100000 {
	+ label = "Factory";
	+ reg = <0x100000 0x40000>;
	+ read-only;
	+ };
	+
	+ partition@140000 {
	+ label = "crash";
	+ reg = <0x140000 0x40000>;
	+ };
	+
	+ partition@180000 {
	+ label = "crash_syslog";
	+ reg = <0x180000 0x40000>;
	+ };
	+
	+ partition@1c0000 {
	+ label = "reserved0";
	+ reg = <0x1c0000 0x40000>;
	+ read-only;
	+ };
	+
	+ /* uboot expects to find kernels at 0x200000 & 0x600000
	+ * referred to as system 1 & system 2 respectively.
	+ * a kernel is considered suitable for handing control over
	+ * if its linux magic number exists & uImage CRC are correct.
	+ * If either of those conditions fail, a matching sys'n'_fail flag
	+ * is set in uboot env & a restart performed in the hope that the
	+ * alternate kernel is okay.
	+ * if neither kernel checksums ok and both are marked failed, system 2
	+ * is booted anyway.
	+ *
	+ * Note uboot's tftp flash install writes the transferred
	+ * image to both kernel partitions.
	+ */
	+
	+ partition@200000 {
	+ label = "kernel_stock";
	+ reg = <0x200000 0x400000>;
	+ };
	+
	+ partition@600000 {
	+ label = "kernel";
	+ reg = <0x600000 0x400000>;
	+ };
	+
	+ /* ubi partition is the result of squashing
	+ * next consecutive stock partitions:
	+ * - rootfs0 (rootfs partition for stock kernel0),
	+ * - rootfs1 (rootfs partition for stock failsafe kernel1),
	+ * - overlay (used as ubi overlay in stock fw)
	+ * resulting 117,5MiB space for packages.
	+ */
	+
	+ partition@a00000 {
	+ label = "ubi";
	+ reg = <0xa00000 0x7580000>;
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ wifi@14c3,7603 {
	+ compatible = "pci14c3,7603";
	+ reg = <0x0000 0 0 0 0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	+ reg = <0x0000 0 0 0 0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+ mediatek,portmap = "lwlll";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "jtag", "uart2", "uart3", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/MIWIFI-MINI.dts
	===================================================================
	--- sys/gnu/dts/mips/MIWIFI-MINI.dts
	+++ sys/gnu/dts/mips/MIWIFI-MINI.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
	model = "Xiaomi MiWiFi Mini";
	@@ -15,17 +18,17 @@

	blue {
	label = "miwifi-mini:blue:status";
	- gpios = <&gpio1 0 1>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	};

	yellow {
	label = "miwifi-mini:yellow:status";
	- gpios = <&gpio1 2 1>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	};

	red {
	label = "miwifi-mini:red:status";
	- gpios = <&gpio1 5 1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +40,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio1 6 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -117,12 +119,14 @@
	&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	+ mtd-mac-address = <&factory 0x28>;
	mediatek,portmap = "llllw";
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};

	&pcie {
	@@ -133,7 +137,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -144,10 +148,5 @@
	ralink,group = "i2c", "rgmii1";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};
	Index: sys/gnu/dts/mips/MIWIFI-NANO.dts
	===================================================================
	--- sys/gnu/dts/mips/MIWIFI-NANO.dts
	+++ sys/gnu/dts/mips/MIWIFI-NANO.dts
	@@ -2,8 +2,11 @@

	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc";
	+ compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc";
	model = "MiWiFi Nano";

	chosen {
	@@ -18,21 +21,30 @@
	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "miwifi-nano:blue:wifi";
	- gpios = <&gpio0 11 1>;
	- default-state = "1";
	+ status_blue {
	+ label = "miwifi-nano:blue:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	- status {
	+ status_red {
	label = "miwifi-nano:red:status";
	- gpios = <&gpio1 5 1>;
	- default-state = "on";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ status_amber {
	+ label = "miwifi-nano:amber:status";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	- radio {
	- label = "miwifi-nano:amber:radio";
	- gpios = <&gpio1 12 1>;
	- default-state = "1";
	+ };

	+ gpio-keys {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -40,7 +52,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "refclk", "wled", "gpio";
	+ ralink,group = "refclk", "wled_an", "gpio";
	ralink,function = "gpio";
	};
	};
	@@ -48,6 +60,11 @@

	&wmac {
	status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x4>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	};

	&spi0 {
	@@ -58,7 +75,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	m25p,chunked-io = <32>;

	@@ -82,7 +98,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0xfb0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MLW221.dts
	===================================================================
	--- sys/gnu/dts/mips/MLW221.dts
	+++ sys/gnu/dts/mips/MLW221.dts
	@@ -2,8 +2,11 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mlw221", "ralink,mt7620n-soc";
	+ compatible = "kingston,mlw221", "ralink,mt7620n-soc";
	model = "Kingston MLW221";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "mlw221:blue:system";
	- gpios = <&gpio2 3 1>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "mlw221:blue:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	system {
	label = "system";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -60,7 +63,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl129p1";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MLWG2.dts
	===================================================================
	--- sys/gnu/dts/mips/MLWG2.dts
	+++ sys/gnu/dts/mips/MLWG2.dts
	@@ -2,8 +2,11 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mlwg2", "ralink,mt7620n-soc";
	+ compatible = "kingston,mlwg2", "ralink,mt7620n-soc";
	model = "Kingston MLWG2";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "mlwg2:blue:system";
	- gpios = <&gpio2 3 1>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "mlwg2:blue:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	system {
	label = "system";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -60,7 +63,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MOFI3500-3GN.dts
	===================================================================
	--- sys/gnu/dts/mips/MOFI3500-3GN.dts
	+++ sys/gnu/dts/mips/MOFI3500-3GN.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MOFI3500-3GN", "ralink,rt3052-soc";
	+ compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc";
	model = "MoFi Network MOFI3500-3GN";

	cfi@1f000000 {
	@@ -43,22 +46,22 @@

	usb {
	label = "mofi3500-3gn:green:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "mofi3500-3gn:green:3g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "mofi3500-3gn:green:status";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "mofi3500-3gn:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,20 +73,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	connect {
	label = "connect";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0xda>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_CONNECT>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MPRA1.dts
	===================================================================
	--- sys/gnu/dts/mips/MPRA1.dts
	+++ sys/gnu/dts/mips/MPRA1.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MPRA1", "ralink,rt5350-soc";
	+ compatible = "hame,mpr-a1", "ralink,rt5350-soc";
	model = "HAME MPR-A1";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "mpr-a1:blue:system";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "mpr-a1:red:power";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	wps {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -40,13 +43,13 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	root_hub {
	gpio-export,name = "root_hub";
	gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -59,7 +62,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MPRA2.dts
	===================================================================
	--- sys/gnu/dts/mips/MPRA2.dts
	+++ sys/gnu/dts/mips/MPRA2.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MPRA2", "ralink,rt5350-soc";
	+ compatible = "hame,mpr-a2", "ralink,rt5350-soc";
	model = "HAME MPR-A2";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "mpr-a2:blue:system";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "mpr-a2:red:power";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	wps {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -40,13 +43,13 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	root_hub {
	gpio-export,name = "root_hub";
	gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -59,7 +62,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MR-102N.dts
	===================================================================
	--- sys/gnu/dts/mips/MR-102N.dts
	+++ sys/gnu/dts/mips/MR-102N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MR-102N", "ralink,rt3052-soc";
	+ compatible = "aximcom,mr-102n", "ralink,rt3052-soc";
	model = "AXIMCom MR-102N";

	cfi@1f000000 {
	@@ -53,17 +56,17 @@

	usb {
	label = "mr-102n:green:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "mr-102n:amber:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "mr-102n:green:wlan";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -75,14 +78,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MT7620a.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7620a.dts
	+++ sys/gnu/dts/mips/MT7620a.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620a + MT7610e evaluation board";
	@@ -14,14 +17,14 @@

	s2 {
	label = "S2";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	s3 {
	label = "S3";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -34,7 +37,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MT7620a_MT7530.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7620a_MT7530.dts
	+++ sys/gnu/dts/mips/MT7620a_MT7530.dts
	@@ -15,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MT7620a_MT7610e.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7620a_MT7610e.dts
	+++ sys/gnu/dts/mips/MT7620a_MT7610e.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620A evaluation board";
	@@ -14,14 +17,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -38,7 +41,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <1000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MT7620a_V22SG.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7620a_V22SG.dts
	+++ sys/gnu/dts/mips/MT7620a_V22SG.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620a V22SG High Power evaluation board";
	@@ -14,14 +17,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	Index: sys/gnu/dts/mips/MT7621.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7621.dts
	+++ sys/gnu/dts/mips/MT7621.dts
	@@ -14,35 +14,33 @@
	chosen {
	bootargs = "console=ttyS0,57600";
	};
	+};

	- nand@1e003000 {
	- partition@0 {
	- label = "uboot";
	- reg = <0x00000 0x80000>; /* 64 KB */
	- };
	+&nand {
	+ status = "okay";

	- partition@80000 {
	- label = "uboot_env";
	- reg = <0x80000 0x80000>; /* 64 KB */
	- };
	+ partition@0 {
	+ label = "uboot";
	+ reg = <0x00000 0x80000>; /* 64 KB */
	+ };

	- partition@100000 {
	- label = "factory";
	- reg = <0x100000 0x40000>;
	- };
	+ partition@80000 {
	+ label = "uboot_env";
	+ reg = <0x80000 0x80000>; /* 64 KB */
	+ };

	- partition@140000 {
	- label = "rootfs";
	- reg = <0x140000 0xec0000>;
	- };
	+ partition@100000 {
	+ label = "factory";
	+ reg = <0x100000 0x40000>;
	};
	-};

	-&sdhci {
	- status = "okay";
	+ partition@140000 {
	+ label = "rootfs";
	+ reg = <0x140000 0xec0000>;
	+ };
	};

	-&xhci {
	+&sdhci {
	status = "okay";
	};

	Index: sys/gnu/dts/mips/MT7628.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7628.dts
	+++ sys/gnu/dts/mips/MT7628.dts
	@@ -15,7 +15,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag";
	+ ralink,group = "i2c";
	ralink,function = "gpio";
	};
	};
	@@ -33,7 +33,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	m25p,chunked-io = <32>;

	Index: sys/gnu/dts/mips/MZK-750DHP.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-750DHP.dts
	+++ sys/gnu/dts/mips/MZK-750DHP.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
	model = "Planex MZK-750DHP";

	gpio-leds {
	@@ -11,17 +14,17 @@

	wps {
	label = "mzk-750dhp:green:wps";
	- gpios = <&gpio2 15 1>;
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "mzk-750dhp:green:power";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "mzk-750dhp:green:wlan5g";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	s1 {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	s2 {
	label = "wps";
	- gpios = <&gpio2 19 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -61,7 +64,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -121,7 +123,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MZK-DP150N.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-DP150N.dts
	+++ sys/gnu/dts/mips/MZK-DP150N.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MZK-DP150N", "ralink,rt5350-soc";
	+ compatible = "planex,mzk-dp150n", "ralink,rt5350-soc";
	model = "Planex MZK-DP150N";

	gpio-leds {
	@@ -11,7 +14,7 @@

	power {
	label = "mzk-dp150n:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -41,7 +44,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MZK-EX300NP.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-EX300NP.dts
	+++ sys/gnu/dts/mips/MZK-EX300NP.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,mzk-ex300np", "ralink,mt7620a-soc";
	model = "Planex MZK-EX300NP";

	gpio-leds {
	@@ -11,32 +14,32 @@

	wifi {
	label = "mzk-ex300np:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "mzk-ex300np:green:wps";
	- gpios = <&gpio1 5 1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};

	rep {
	label = "mzk-ex300np:blue:rep";
	- gpios = <&gpio1 4 1>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	};

	wifi1 {
	label = "mzk-ex300np:blue:wifi1";
	- gpios = <&gpio1 1 1>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "mzk-ex300np:blue:wifi2";
	- gpios = <&gpio1 2 1>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	};

	wifi3 {
	label = "mzk-ex300np:blue:wifi3";
	- gpios = <&gpio1 0 1>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -48,14 +51,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 3 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -76,7 +79,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MZK-EX750NP.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-EX750NP.dts
	+++ sys/gnu/dts/mips/MZK-EX750NP.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
	model = "Planex MZK-EX750NP";

	gpio-leds {
	@@ -11,37 +14,37 @@

	power {
	label = "mzk-ex750np:red:power";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "mzk-ex750np:red:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "mzk-ex750np:green:wps";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	rep {
	label = "mzk-ex750np:blue:rep";
	- gpios = <&gpio2 16 1>;
	+ gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
	};

	wifi1 {
	label = "mzk-ex750np:blue:wifi1";
	- gpios = <&gpio2 19 1>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "mzk-ex750np:blue:wifi2";
	- gpios = <&gpio2 18 1>;
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	};

	wifi3 {
	label = "mzk-ex750np:blue:wifi3";
	- gpios = <&gpio2 17 1>;
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,14 +56,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 13 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -81,7 +84,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -142,7 +144,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MZK-W04N-XX.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/MZK-W04N-XX.dts
	@@ -1,94 +0,0 @@
	-/dts-v1/;
	-
	-#include "rt2880.dtsi"
	-
	-/ {
	- compatible = "MZK-WNH", "ralink,rt2880-soc";
	- model = "Planex MZK-WNH";
	-
	-/*
	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x2000000>;
	- };
	-*/
	-
	- cfi@1f000000 {
	- compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	- bank-width = <2>;
	- device-width = <2>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	-
	- partition@0 {
	- label = "Bootloader";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- devdata: partition@30000 {
	- label = "Config";
	- reg = <0x00030000 0x00010000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "Factory";
	- reg = <0x00040000 0x00010000>;
	- read-only;
	- };
	- kernel: partition@50000 {
	- label = "kernel";
	- reg = <0x00050000 0x000f0000>;
	- read-only;
	- };
	- rootfs: partition@160000 {
	- label = "rootfs";
	- reg = <0x00140000 0x002c0000>;
	- read-only;
	- };
	- upgrade: partition@400000 {
	- label = "upgrade";
	- reg = <0x00050000 0x003b0000>;
	- read-only;
	- };
	-
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "status";
	- gpios = <&gpio0 12 0>;
	- };
	-
	- };
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- };
	-
	- ip17x@0 {
	- compatible = "icplus,ip17x";
	- };
	-
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/MZK-W300NH2.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-W300NH2.dts
	+++ sys/gnu/dts/mips/MZK-W300NH2.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MZK-W300NH2", "ralink,rt3052-soc";
	+ compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
	model = "Planex MZK-W300NH2";

	cfi@1f000000 {
	@@ -49,17 +52,17 @@

	power {
	label = "mzk-w300nh2:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "mzk-w300nh2:amber:wlan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "mzk-w300nh2:amber:wps";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -71,20 +74,20 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	rt {
	label = "rt";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MZK-WDPR.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-WDPR.dts
	+++ sys/gnu/dts/mips/MZK-WDPR.dts
	@@ -2,8 +2,10 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "MZK-WDPR", "ralink,rt3052-soc";
	+ compatible = "planex,mzk-wdpr", "ralink,rt3052-soc";
	model = "Planex MZK-WDPR";

	chosen {
	@@ -55,7 +57,7 @@
	lcd_ctrl1 {
	gpio-export,name = "lcd_ctrl1";
	gpio-export,output = <0>;
	- gpios = <&gpio0 1 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MicroWRT.dts
	===================================================================
	--- sys/gnu/dts/mips/MicroWRT.dts
	+++ sys/gnu/dts/mips/MicroWRT.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "microwrt", "ralink,mt7620a-soc";
	+ compatible = "microduino,microwrt", "ralink,mt7620a-soc";
	model = "Microduino MicroWRT";

	chosen {
	@@ -18,14 +21,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -46,7 +49,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/NA930.dts
	===================================================================
	--- sys/gnu/dts/mips/NA930.dts
	+++ sys/gnu/dts/mips/NA930.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	+ compatible = "sercomm,na930", "ralink,mt7620a-soc";
	model = "Sercomm NA930";

	chosen {
	@@ -47,20 +50,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	zwave {
	label = "zwave";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -69,22 +72,22 @@

	zwave {
	label = "na930:blue:zwave";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "na930:blue:status";
	- gpios = <&gpio2 26 1>;
	+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
	};

	service {
	label = "na930:blue:service";
	- gpios = <&gpio2 28 1>;
	+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "na930:blue:power";
	- gpios = <&gpio2 29 1>;
	+ gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -95,7 +98,7 @@
	telit {
	gpio-export,name = "telit";
	gpio-export,output = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/NBG-419N.dts
	===================================================================
	--- sys/gnu/dts/mips/NBG-419N.dts
	+++ sys/gnu/dts/mips/NBG-419N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "NBG-419N", "ralink,rt3052-soc";
	+ compatible = "zyxel,nbg-419n", "ralink,rt3052-soc";
	model = "ZyXEL NBG-419N";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	power {
	label = "nbg-419n:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "nbg-419n:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/NBG-419N2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/NBG-419N2.dts
	@@ -0,0 +1,119 @@
	+/dts-v1/;
	+
	+#include "rt3352.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "zyxel,nbg-419n-v2", "ralink,rt3352-soc";
	+ model = "ZyXEL NBG-419N v2";
	+
	+ palmbus@10000000 {
	+ spi@b00 {
	+ status = "okay";
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "nbg-419n2:green:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "nbg-419n2:green:wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "nbg-419n2:green:usb";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ rfkill {
	+ label = "rfkill";
	+ linux,input-type = <EV_SW>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/NCS601W.dts
	===================================================================
	--- sys/gnu/dts/mips/NCS601W.dts
	+++ sys/gnu/dts/mips/NCS601W.dts
	@@ -3,7 +3,7 @@
	#include "rt5350.dtsi"

	/ {
	- compatible = "NCS601W", "ralink,rt5350-soc";
	+ compatible = "wansview,ncs601w", "ralink,rt5350-soc";
	model = "Wansview NCS601W";
	};

	@@ -15,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/NIXCORE-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/NIXCORE-16M.dts
	+++ sys/gnu/dts/mips/NIXCORE-16M.dts
	@@ -1,6 +1,11 @@
	/dts-v1/;

	-#include "VOCORE.dtsi"
	+#include "NIXCORE.dtsi"
	+
	+/ {
	+ compatible = "nixcore,x1-16m", "nixcore,x1", "ralink,rt5350-soc";
	+ model = "NixcoreX1 (16M)";
	+};

	&spi0 {
	status = "okay";
	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/NIXCORE-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/NIXCORE-8M.dts
	+++ sys/gnu/dts/mips/NIXCORE-8M.dts
	@@ -1,6 +1,11 @@
	/dts-v1/;

	-#include "VOCORE.dtsi"
	+#include "NIXCORE.dtsi"
	+
	+/ {
	+ compatible = "nixcore,x1-8m", "nixcore,x1", "ralink,rt5350-soc";
	+ model = "NixcoreX1 (8M)";
	+};

	&spi0 {
	status = "okay";
	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/NIXCORE.dtsi
	===================================================================
	--- sys/gnu/dts/mips/NIXCORE.dtsi
	+++ sys/gnu/dts/mips/NIXCORE.dtsi
	@@ -1,8 +1,13 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "VoCore", "ralink,rt5350-soc";
	- model = "VoCore";
	+ compatible = "nixcore,x1", "ralink,rt5350-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS1,57600";
	+ };

	gpio-export {
	compatible = "gpio-export";
	@@ -11,154 +16,119 @@
	gpio0 {
	gpio-export,name = "gpio0";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 0 0>;
	- };
	-
	- /* UARTF */
	- gpio7 {
	- /* UARTF_RTS_N */
	- gpio-export,name = "gpio7";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 7 0>;
	- };
	-
	- gpio8 {
	- /* UARTF_TXD */
	- gpio-export,name = "gpio8";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 8 0>;
	- };
	-
	- gpio9 {
	- /* UARTF_CTS_N */
	- gpio-export,name = "gpio9";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 9 0>;
	- };
	-
	- gpio12 {
	- /* UARTF_DCD_N */
	- gpio-export,name = "gpio12";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 12 0>;
	- };
	-
	- gpio13 {
	- /* UARTF_DSR_N */
	- gpio-export,name = "gpio13";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};

	- gpio14 {
	- /* UARTF_RIN */
	- gpio-export,name = "gpio14";
	+ gpio1 {
	+ gpio-export,name = "gpio1";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 14 0>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
	};

	+ /* GPIOs 1-6 are I2C,SPI */
	+ /* GPIO 7-14 are uart1 */
	+ /* GPIOs 15 & 16 are uart2 */
	/* JTAG */
	+
	gpio17 {
	/* JTAG_TDO */
	gpio-export,name = "gpio17";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 17 0>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
	};

	gpio18 {
	/* JTAG_TDI */
	gpio-export,name = "gpio18";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 18 0>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	};

	gpio19 {
	/* JTAG_TMS */
	gpio-export,name = "gpio19";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 19 0>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
	};

	gpio20 {
	/* JTAG_TCLK */
	gpio-export,name = "gpio20";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 20 0>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
	};

	gpio21 {
	/* JTAG_TRST_N */
	gpio-export,name = "gpio21";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 21 0>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
	};

	/* ETH LEDs */
	+ /*
	gpio22 {
	- /* ETH0_LED */
	gpio-export,name = "gpio22";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 0 0>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
	};

	gpio23 {
	- /* ETH1_LED */
	gpio-export,name = "gpio23";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 1 0>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
	};

	gpio24 {
	- /* ETH2_LED */
	gpio-export,name = "gpio24";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 2 0>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	};

	gpio25 {
	- /* ETH3_LED */
	gpio-export,name = "gpio25";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 3 0>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	};

	+ */
	gpio26 {
	/* ETH4_LED */
	gpio-export,name = "gpio26";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 4 0>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- /* UARTF_RXD */
	- label = "vocore:green:status";
	- gpios = <&gpio0 10 0>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
	};

	- eth {
	- /* UARTF_DTR_N */
	- label = "vocore:orange:eth";
	- gpios = <&gpio0 11 0>;
	+ gpio27 {
	+ /* spi_cs1 */
	+ gpio-export,name = "gpio27";
	+ gpio-export,direction_may_change = <1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
	};
	};
	};

	+&gpio0 {
	+ status = "okay";
	+};
	+
	&gpio1 {
	- status = "okay";
	+ status = "okay";
	};

	&i2c {
	- status = "okay";
	+ status = "okay";
	+};
	+
	+&uart {
	+ status = "okay";
	+ reset-names = "gpio uartf";
	};

	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "jtag", "uartf", "led";
	+ ralink,group = "jtag", "led", "spi_cs1";
	ralink,function = "gpio";
	};
	};
	@@ -169,8 +139,7 @@
	};

	&esw {
	- mediatek,portmap = <0x11>;
	- mediatek,portdisable = <0x2e>;
	+ mediatek,portmap = <0x17>;
	};

	&wmac {
	@@ -184,13 +153,3 @@
	&ohci {
	status = "okay";
	};
	-
	-&spi1 {
	- status = "okay";
	-
	- spidev@0 {
	- compatible = "linux,spidev";
	- spi-max-frequency = <10000000>;
	- reg = <0>;
	- };
	-};
	Index: sys/gnu/dts/mips/NW718.dts
	===================================================================
	--- sys/gnu/dts/mips/NW718.dts
	+++ sys/gnu/dts/mips/NW718.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "NW718", "ralink,rt3050-soc";
	+ compatible = "netcore,nw718", "ralink,rt3050-soc";
	model = "Netcore NW718";

	gpio-leds {
	@@ -11,17 +14,17 @@

	cpu {
	label = "nw718:amber:cpu";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "nw718:amber:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "nw718:amber:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <25000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/Newifi-D1.dts
	===================================================================
	--- sys/gnu/dts/mips/Newifi-D1.dts
	+++ sys/gnu/dts/mips/Newifi-D1.dts
	@@ -2,28 +2,38 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG2626";
	+ compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
	+ model = "Newifi-D1";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ reg = <0x0 0x10000000>;
	};

	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus: palmbus@1E000000 {
	- i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	- status = "okay";
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status-red {
	+ label = "newifi-d1:red:status";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status-green {
	+ label = "newifi-d1:green:status";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ statys-blue {
	+ label = "newifi-d1:blue:status";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -35,23 +45,34 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;

	- status {
	- label = "zbt-wg2626:green:status";
	- gpios = <&gpio0 24 1>;
	+ usb2power {
	+ gpio-export,name = "usb2power";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usb3power {
	+ gpio-export,name = "usb3power";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};
	};

	&sdhci {
	status = "okay";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	};

	&spi0 {
	@@ -62,8 +83,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -85,7 +106,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};
	@@ -98,7 +119,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -107,7 +128,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	@@ -119,7 +139,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/Newifi-D2.dts
	===================================================================
	--- sys/gnu/dts/mips/Newifi-D2.dts
	+++ sys/gnu/dts/mips/Newifi-D2.dts
	@@ -2,63 +2,58 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "PBR-M1";
	+ compatible = "d-team,newifi-d2", "mediatek,mt7621-soc";
	+ model = "Newifi-D2";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x10000000>;
	+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	};

	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus: palmbus@1E000000 {
	- i2c: i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	- status = "okay";
	-
	- pcf8563: rtc@51 {
	- status = "okay";
	- compatible = "nxp,pcf8563";
	- reg = <0x51>;
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	- power {
	- label = "pbr-m1:blue:power";
	- gpios = <&gpio0 31 1>;
	+ power-amber {
	+ label = "newifi-d2:amber:power";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	};

	- sys {
	- label = "pbr-m1:blue:sys";
	- gpios = <&gpio1 0 1>;
	+ power-blue {
	+ label = "newifi-d2:blue:power";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	};

	- internet {
	- label = "pbr-m1:blue:internet";
	- gpios = <&gpio0 29 1>;
	+ internet-amber {
	+ label = "newifi-d2:amber:internet";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet-blue {
	+ label = "newifi-d2:blue:internet";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	- label = "pbr-m1:blue:wlan2g";
	- gpios = <&gpio1 1 1>;
	+ label = "newifi-d2:blue:wlan2g";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	- label = "pbr-m1:blue:wlan5g";
	- gpios = <&gpio0 28 1>;
	+ label = "newifi-d2:blue:wlan5g";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "newifi-d2:blue:usb";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,8 +65,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -79,39 +80,12 @@
	compatible = "gpio-export";
	#size-cells = <0>;

	- power_usb2 {
	- gpio-export,name = "power_usb2";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 22 0>;
	- };
	-
	power_usb3 {
	gpio-export,name = "power_usb3";
	gpio-export,output = <1>;
	- gpios = <&gpio0 25 0>;
	- };
	-
	- power_sata {
	- gpio-export,name = "power_sata";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 27 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};
	-
	- beeper: beeper {
	- compatible = "gpio-beeper";
	- gpios = <&gpio0 26 1>;
	- };
	-};
	-
	-&sdhci {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&sdhci_pins>;
	-};
	-
	-&xhci {
	- status = "okay";
	};

	&spi0 {
	@@ -122,8 +96,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -145,7 +119,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};
	@@ -158,7 +132,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -167,7 +141,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	@@ -176,12 +149,10 @@
	mtd-mac-address = <&factory 0xe000>;
	};

	-
	-
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	+ ralink,group = "i2c", "jtag", "uart2", "uart3";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/OMEGA2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/OMEGA2.dts
	@@ -0,0 +1,21 @@
	+/dts-v1/;
	+
	+#include "OMEGA2.dtsi"
	+
	+/ {
	+ compatible = "onion,omega2", "mediatek,mt7628an-soc";
	+ model = "Onion Omega2";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+};
	+
	+&firmware {
	+ reg = <0x50000 0xfb0000>;
	+};
	+
	+&system_led {
	+ label = "omega2:amber:system";
	+};
	Index: sys/gnu/dts/mips/OMEGA2.dtsi
	===================================================================
	--- sys/gnu/dts/mips/OMEGA2.dtsi
	+++ sys/gnu/dts/mips/OMEGA2.dtsi
	@@ -1,37 +1,20 @@
	-/dts-v1/;
	-
	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	- model = "MediaTek LinkIt Smart 7688";
	+ compatible = "onion,omega2", "mediatek,mt7628an-soc";

	chosen {
	- bootargs = "console=ttyS2,57600";
	- };
	-
	- aliases {
	- serial0 = &uart2;
	- };
	-
	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x8000000>;
	- };
	-
	- bootstrap {
	- compatible = "mediatek,linkit";
	-
	- status = "okay";
	+ bootargs = "console=ttyS0,115200";
	};

	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "mediatek:orange:wifi";
	- gpios = <&wgpio 0 0>;
	- default-state = "on";
	+ system_led: system {
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -41,20 +24,12 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	+ reset {
	label = "reset";
	- gpios = <&gpio1 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	-
	- wgpio: gpio-wifi {
	- compatible = "mediatek,gpio-wifi";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- gpio-controller;
	- #gpio-cells = <2>;
	- };
	};

	&pinctrl {
	@@ -91,17 +66,31 @@

	wled_an {
	ralink,group = "wled_an";
	- ralink,function = "wled_an";
	+ ralink,function = "gpio";
	};

	wdt {
	ralink,group = "wdt";
	ralink,function = "gpio";
	};
	+
	+ pwm0 {
	+ ralink,group = "pwm0";
	+ ralink,function = "gpio";
	+ };
	+
	+ pwm1 {
	+ ralink,group = "pwm1";
	+ ralink,function = "gpio";
	+ };
	};
	};

	-&wmac {
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	status = "okay";
	};

	@@ -116,7 +105,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <40000000>;
	m25p,chunked-io = <31>;

	@@ -129,6 +117,7 @@
	partition@30000 {
	label = "u-boot-env";
	reg = <0x30000 0x10000>;
	+ read-only;
	};

	factory: partition@40000 {
	@@ -137,9 +126,8 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	};
	};

	@@ -164,17 +152,13 @@
	status = "okay";
	};

	-&pwm {
	- status = "okay";
	-};
	-
	&ethernet {
	mtd-mac-address = <&factory 0x28>;
	};

	&sdhci {
	status = "okay";
	- mediatek,cd-high;
	+ mediatek,cd-low;
	};

	&wmac {
	Index: sys/gnu/dts/mips/OMEGA2P.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/OMEGA2P.dts
	@@ -0,0 +1,21 @@
	+/dts-v1/;
	+
	+#include "OMEGA2.dtsi"
	+
	+/ {
	+ compatible = "onion,omega2p", "onion,omega2", "mediatek,mt7628an-soc";
	+ model = "Onion Omega2+";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+};
	+
	+&firmware {
	+ reg = <0x50000 0x1fb0000>;
	+};
	+
	+&system_led {
	+ label = "omega2p:amber:system";
	+};
	Index: sys/gnu/dts/mips/OY-0001.dts
	===================================================================
	--- sys/gnu/dts/mips/OY-0001.dts
	+++ sys/gnu/dts/mips/OY-0001.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc";
	model = "OY-0001";

	chosen {
	@@ -15,12 +18,12 @@

	powerled {
	label = "oy-0001:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifiled {
	label = "oy-0001:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,8 +35,8 @@

	s1 {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -54,7 +57,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/PBR-D1.dts
	===================================================================
	--- sys/gnu/dts/mips/PBR-D1.dts
	+++ sys/gnu/dts/mips/PBR-D1.dts
	@@ -2,12 +2,15 @@

	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	- model = "MediaTek LinkIt Smart 7688";
	+ compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc";
	+ model = "PBR-D1";

	chosen {
	- bootargs = "console=ttyS2,57600";
	+ bootargs = "console=ttyS0,115200";
	};

	aliases {
	@@ -19,18 +22,18 @@
	reg = <0x0 0x8000000>;
	};

	- bootstrap {
	- compatible = "mediatek,linkit";
	-
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "mediatek:orange:wifi";
	- gpios = <&wgpio 0 0>;
	+ usb {
	+ label = "pbr-d1:orange:usb";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ default-state = "off";
	+ };
	+
	+ power {
	+ label = "pbr-d1:orange:power";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	default-state = "on";
	};
	};
	@@ -41,10 +44,10 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	+ reset {
	label = "reset";
	- gpios = <&gpio1 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -64,13 +67,8 @@
	ralink,function = "gpio";
	};

	- perst {
	- ralink,group = "perst";
	- ralink,function = "gpio";
	- };
	-
	- refclk {
	- ralink,group = "refclk";
	+ i2c {
	+ ralink,group = "i2c";
	ralink,function = "gpio";
	};

	@@ -84,16 +82,6 @@
	ralink,function = "gpio";
	};

	- wled_kn {
	- ralink,group = "wled_kn";
	- ralink,function = "gpio";
	- };
	-
	- wled_an {
	- ralink,group = "wled_an";
	- ralink,function = "wled_an";
	- };
	-
	wdt {
	ralink,group = "wdt";
	ralink,function = "gpio";
	@@ -101,10 +89,6 @@
	};
	};

	-&wmac {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -116,7 +100,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <40000000>;
	m25p,chunked-io = <31>;

	@@ -139,7 +122,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	+ reg = <0x50000 0x0fb0000>;
	};
	};

	@@ -176,7 +159,3 @@
	status = "okay";
	mediatek,cd-high;
	};
	-
	-&wmac {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/PBR-M1.dts
	===================================================================
	--- sys/gnu/dts/mips/PBR-M1.dts
	+++ sys/gnu/dts/mips/PBR-M1.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
	model = "PBR-M1";

	memory@0 {
	@@ -17,12 +20,6 @@

	palmbus: palmbus@1E000000 {
	i2c: i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";

	pcf8563: rtc@51 {
	@@ -38,27 +35,27 @@

	power {
	label = "pbr-m1:blue:power";
	- gpios = <&gpio0 31 1>;
	+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
	};

	sys {
	label = "pbr-m1:blue:sys";
	- gpios = <&gpio1 0 1>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "pbr-m1:blue:internet";
	- gpios = <&gpio0 29 1>;
	+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	label = "pbr-m1:blue:wlan2g";
	- gpios = <&gpio1 1 1>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "pbr-m1:blue:wlan5g";
	- gpios = <&gpio0 28 1>;
	+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,8 +67,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -82,25 +79,25 @@
	power_usb2 {
	gpio-export,name = "power_usb2";
	gpio-export,output = <1>;
	- gpios = <&gpio0 22 0>;
	+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
	};

	power_usb3 {
	gpio-export,name = "power_usb3";
	gpio-export,output = <1>;
	- gpios = <&gpio0 25 0>;
	+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
	};

	power_sata {
	gpio-export,name = "power_sata";
	gpio-export,output = <1>;
	- gpios = <&gpio0 27 0>;
	+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
	};
	};

	beeper: beeper {
	compatible = "gpio-beeper";
	- gpios = <&gpio0 26 1>;
	+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -110,10 +107,6 @@
	pinctrl-0 = <&sdhci_pins>;
	};

	-&xhci {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -122,8 +115,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -158,7 +151,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -167,7 +160,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	@@ -176,8 +168,6 @@
	mtd-mac-address = <&factory 0xe000>;
	};

	-
	-
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	Index: sys/gnu/dts/mips/PSG1208.dts
	===================================================================
	--- sys/gnu/dts/mips/PSG1208.dts
	+++ sys/gnu/dts/mips/PSG1208.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PSG1208", "ralink,mt7620a-soc";
	+ compatible = "phicomm,psg1208", "ralink,mt7620a-soc";
	model = "Phicomm PSG1208";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wan {
	label = "psg1208:white:wps";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "psg1208:white:wlan2g";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -50,7 +53,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -81,7 +83,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	+ ralink,group = "i2c", "spi refclk", "wled";
	ralink,function = "gpio";
	};
	};
	@@ -102,7 +104,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/PSG1218.dtsi
	===================================================================
	--- sys/gnu/dts/mips/PSG1218.dtsi
	+++ sys/gnu/dts/mips/PSG1218.dtsi
	@@ -1,9 +1,10 @@
	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- chosen {
	- bootargs = "console=ttyS0,115200";
	- };
	+ compatible = "phicomm,psg1218", "ralink,mt7620a-soc";

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -13,21 +14,13 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	-
	-&gpio0 {
	- status = "okay";
	-};

	-&gpio2 {
	- status = "okay";
	-};
	-
	-&gpio3 {
	+&gpio0 {
	status = "okay";
	};

	@@ -39,7 +32,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -48,33 +40,25 @@
	read-only;
	};

	- partition@30000 {
	+ partition@20000 {
	label = "u-boot-env";
	reg = <0x30000 0x10000>;
	read-only;
	};

	- factory: partition@40000 {
	+ factory: partition@30000 {
	label = "factory";
	reg = <0x40000 0x10000>;
	read-only;
	};

	- partition@50000 {
	+ partition@40000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x7b0000>;
	};
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&pcie {
	status = "okay";

	@@ -83,25 +67,11 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	-
	+
	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uartf", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	- };
	-};
	Index: sys/gnu/dts/mips/PSG1218A.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/PSG1218A.dts
	@@ -0,0 +1,47 @@
	+/dts-v1/;
	+
	+#include "PSG1218.dtsi"
	+
	+/ {
	+ compatible = "phicomm,psg1218a", "phicomm,psg1218", "ralink,mt7620a-soc";
	+ model = "Phicomm PSG1218 rev.A";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ blue {
	+ label = "psg1218a:blue:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ yellow {
	+ label = "psg1218a:yellow:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ red {
	+ label = "psg1218a:red:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	Index: sys/gnu/dts/mips/PSG1218B.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/PSG1218B.dts
	@@ -0,0 +1,42 @@
	+/dts-v1/;
	+
	+#include "PSG1218.dtsi"
	+
	+/ {
	+ compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc";
	+ model = "Phicomm PSG1218 rev.B";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ blue {
	+ label = "psg1218b:blue:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ yellow {
	+ label = "psg1218b:yellow:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ red {
	+ label = "psg1218b:red:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+};
	Index: sys/gnu/dts/mips/PSR-680W.dts
	===================================================================
	--- sys/gnu/dts/mips/PSR-680W.dts
	+++ sys/gnu/dts/mips/PSR-680W.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PSR-680W", "ralink,rt3052-soc";
	+ compatible = "petatel,psr-680w", "ralink,rt3052-soc";
	model = "Petatel PSR-680W Wireless 3G Router";

	chosen {
	@@ -47,7 +50,7 @@

	wan {
	label = "psr-680w:red:wan";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -59,8 +62,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/PWH2004.dts
	===================================================================
	--- sys/gnu/dts/mips/PWH2004.dts
	+++ sys/gnu/dts/mips/PWH2004.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PWH2004", "ralink,rt3052-soc";
	+ compatible = "prolink,pwh2004", "ralink,rt3052-soc";
	model = "Prolink PWH2004";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	wifi {
	label = "pwh2004:red:wifi";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "pwh2004:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/PX-4885-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/PX-4885-4M.dts
	+++ sys/gnu/dts/mips/PX-4885-4M.dts
	@@ -2,6 +2,11 @@

	#include "PX-4885.dtsi"

	+/ {
	+ compatible = "7links,px-4885-4m", "7links,px-4885", "ralink,rt5350-soc";
	+ model = "7Links PX-4885 (4M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/PX-4885-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/PX-4885-8M.dts
	+++ sys/gnu/dts/mips/PX-4885-8M.dts
	@@ -2,6 +2,11 @@

	#include "PX-4885.dtsi"

	+/ {
	+ compatible = "7links,px-4885-8m", "7links,px-4885", "ralink,rt5350-soc";
	+ model = "7Links PX-4885 (8M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/PX-4885.dtsi
	===================================================================
	--- sys/gnu/dts/mips/PX-4885.dtsi
	+++ sys/gnu/dts/mips/PX-4885.dtsi
	@@ -1,8 +1,10 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PX-4885", "ralink,rt5350-soc";
	- model = "7Links PX-4885";
	+ compatible = "7links,px-4885", "ralink,rt5350-soc";

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -12,8 +14,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -22,12 +24,12 @@

	orange {
	label = "px-4885:orange:wifi";
	- gpios = <&gpio0 18 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};

	blue {
	label = "px-4885:blue:storage";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/R6220.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/R6220.dts
	@@ -0,0 +1,158 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "netgear,r6220", "mediatek,mt7621-soc";
	+ model = "Netgear R6220";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "r6220:green:power";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "r6220:green:usb";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet {
	+ label = "r6220:green:wan";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi {
	+ label = "r6220:green:wifi";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "r6220:green:wps";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ wifi {
	+ label = "wifi";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usbpower {
	+ gpio-export,name = "usbpower";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x100000>;
	+ read-only;
	+ };
	+
	+ partition@100000 {
	+ label = "SC PID";
	+ reg = <0x100000 0x100000>;
	+ read-only;
	+ };
	+
	+ partition@200000 {
	+ label = "kernel";
	+ reg = <0x200000 0x400000>;
	+ };
	+
	+ partition@600000 {
	+ label = "ubi";
	+ reg = <0x600000 0x1c00000>;
	+ };
	+
	+ factory: partition@2e00000 {
	+ label = "factory";
	+ reg = <0x2e00000 0x100000>;
	+ read-only;
	+ };
	+
	+ partition@4200000 {
	+ label = "reserved";
	+ reg = <0x4200000 0x3c00000>;
	+ read-only;
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x00000004>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart3", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/RB750Gr3.dts
	===================================================================
	--- sys/gnu/dts/mips/RB750Gr3.dts
	+++ sys/gnu/dts/mips/RB750Gr3.dts
	@@ -2,13 +2,16 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Firefly FireWRT";
	+ compatible = "mikrotik,rb750gr3", "mediatek,mt7621-soc";
	+ model = "MikroTik RB750Gr3";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ reg = <0x0 0x10000000>;
	};

	chosen {
	@@ -18,9 +21,14 @@
	gpio-leds {
	compatible = "gpio-leds";

	- power {
	- label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	+ pwr {
	+ label = "rb750gr3:blue:pwr";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usr {
	+ label = "rb750gr3:green:usr";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -30,22 +38,35 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ mode {
	+ label = "mode";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};

	- power {
	- label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ res {
	+ label = "res";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	-};

	-&sdhci {
	- status = "okay";
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ buzzer {
	+ gpio-export,name = "buzzer";
	+ gpio-export,output = <0>;
	+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usb {
	+ gpio-export,name = "usb";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	};

	&spi0 {
	@@ -56,8 +77,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -81,40 +102,24 @@
	label = "firmware";
	reg = <0x50000 0xfb0000>;
	};
	- };
	-};
	-
	-&pcie {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };

	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	};
	};

	&ethernet {
	mtd-mac-address = <&factory 0xe000>;
	+ mtd-mac-address-increment = <1>;
	};

	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2";
	+ ralink,group = "i2c", "uart2", "uart3", "pcie", "rgmii2", "jtag";
	ralink,function = "gpio";
	};
	};
	};
	+
	+&sdhci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/RBM33G.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/RBM33G.dts
	@@ -0,0 +1,156 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "mikrotik,rbm33g", "mediatek,mt7621-soc";
	+ model = "MikroTik RBM33G";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ usr {
	+ label = "rbm33g:green:usr";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ res {
	+ label = "res";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ pcie0_vcc_reg {
	+ compatible = "regulator-fixed";
	+ regulator-name = "pcie0_vcc";
	+
	+ regulator-min-microvolt = <3300000>;
	+ regulator-max-microvolt = <3300000>;
	+ gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ enable-active-high;
	+ regulator-boot-on;
	+ regulator-always-on;
	+ };
	+
	+ pcie1_vcc_reg {
	+ compatible = "regulator-fixed";
	+ regulator-name = "pcie1_vcc";
	+
	+ regulator-min-microvolt = <3300000>;
	+ regulator-max-microvolt = <3300000>;
	+ gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ enable-active-high;
	+ regulator-boot-on;
	+ regulator-always-on;
	+ };
	+
	+ pcie2_vcc_reg {
	+ compatible = "regulator-fixed";
	+ regulator-name = "pcie2_vcc";
	+
	+ regulator-min-microvolt = <3300000>;
	+ regulator-max-microvolt = <3300000>;
	+ gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ enable-active-high;
	+ regulator-boot-on;
	+ regulator-always-on;
	+ };
	+
	+ usb_vcc_reg {
	+ compatible = "regulator-fixed";
	+ regulator-name = "usb_vcc";
	+
	+ regulator-min-microvolt = <5000000>;
	+ regulator-max-microvolt = <5000000>;
	+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ enable-active-high;
	+ regulator-always-on;
	+ };
	+};
	+
	+
	+&spi0 {
	+ status = "okay";
	+
	+ w25q40@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <3125000>;
	+
	+ partition@0 {
	+ label = "routerboot";
	+ reg = <0x0 0xf000>;
	+ read-only;
	+ };
	+
	+ factory: partition@f000 {
	+ label = "factory";
	+ reg = <0xf000 0x71000>;
	+ read-only;
	+ };
	+
	+ };
	+
	+ w25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <1>;
	+ spi-max-frequency = <3125000>;
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x040000 0xFC0000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x0010>;
	+ mtd-mac-address-increment = <1>;
	+};
	+
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart2", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/RE350.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/RE350.dts
	@@ -0,0 +1,164 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,re350-v1", "mediatek,mt7621-soc";
	+ model = "TP-LINK RE350 v1";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "re350-v1:blue:power";
	+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi2g {
	+ label = "re350-v1:blue:wifi2G";
	+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi5g {
	+ label = "re350-v1:blue:wifi5G";
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps_r {
	+ label = "re350-v1:red:wps";
	+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wps_b {
	+ label = "re350-v1:blue:wps";
	+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ eth {
	+ label = "re350-v1:green:eth_act";
	+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ eth2 {
	+ label = "re350-v1:green:eth_link";
	+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ led {
	+ label = "led";
	+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ power {
	+ label = "power";
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ w25q64@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x5e0000>;
	+ };
	+
	+ config: partition@600000 {
	+ label = "config";
	+ reg = <0x600000 0x50000>;
	+ read-only;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 0>;
	+ mtd-mac-address = <&config 0x10008>;
	+ mtd-mac-address-increment = <1>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&config 0x10008>;
	+ mtd-mac-address-increment = <2>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&config 0x10008>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "rgmii2", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/RE6500.dts
	===================================================================
	--- sys/gnu/dts/mips/RE6500.dts
	+++ sys/gnu/dts/mips/RE6500.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "linksys,re6500", "mediatek,mt7621-soc";
	model = "Linksys RE6500";

	memory@0 {
	@@ -20,12 +23,12 @@

	wifi {
	label = "re6500:orange:wifi";
	- gpios = <&gpio0 0 0>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};

	power {
	label = "re6500:white:power";
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -37,14 +40,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 11 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -57,8 +60,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -102,7 +105,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -111,7 +114,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	@@ -119,3 +122,7 @@
	&ethernet {
	mtd-mac-address = <&factory 0x2e>;
	};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/RP-N53.dts
	===================================================================
	--- sys/gnu/dts/mips/RP-N53.dts
	+++ sys/gnu/dts/mips/RP-N53.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "asus,rp-n53", "ralink,mt7620a-soc";
	model = "Asus RP-N53";
	@@ -14,26 +17,26 @@

	touch {
	label = "touch";
	- gpios = <&gpio1 0 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	audio {
	label = "audio";
	- gpios = <&gpio1 3 0>;
	- linux,code = <0x101>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_1>;
	};
	};

	@@ -42,42 +45,42 @@

	backlight {
	label = "rp-n53:white:back";
	- gpios = <&gpio1 4 1>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	};

	wifi0 {
	label = "rp-n53:blue:5g3";
	- gpios = <&gpio1 5 1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};

	wifi1 {
	label = "rp-n53:blue:5g2";
	- gpios = <&gpio1 6 1>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "rp-n53:blue:5g1";
	- gpios = <&gpio1 7 1>;
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	};

	wifi3 {
	label = "rp-n53:blue:wifi";
	- gpios = <&gpio1 8 1>;
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	};

	wifi4 {
	label = "rp-n53:blue:2g1";
	- gpios = <&gpio1 9 1>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};

	wifi5 {
	label = "rp-n53:blue:2g2";
	- gpios = <&gpio1 10 1>;
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	};

	wifi6 {
	label = "rp-n53:blue:2g3";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -104,7 +107,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -161,4 +163,13 @@

	&pcie {
	status = "okay";
	+
	+ pcie-bridge {
	+ wifi@1814,5592 {
	+ compatible = "pci1814,5592";
	+ reg = <0x0000 0 0 0 0>;
	+ ralink,2ghz = <0>;
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	+ };
	+ };
	};
	Index: sys/gnu/dts/mips/RT-AC51U.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-AC51U.dts
	+++ sys/gnu/dts/mips/RT-AC51U.dts
	@@ -1,37 +1,30 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
	- model = "Asus RT-N14U";
	+ compatible = "asus,rt-ac51u", "ralink,mt7620a-soc";
	+ model = "Asus RT-AC51U";

	gpio-leds {
	compatible = "gpio-leds";

	- wan {
	- label = "rt-n14u:blue:wan";
	- gpios = <&gpio2 0 1>;
	- };
	-
	- lan {
	- label = "rt-n14u:blue:lan";
	- gpios = <&gpio2 1 1>;
	+ power {
	+ label = "rt-ac51u:blue:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	usb {
	- label = "rt-n14u:blue:usb";
	- gpios = <&gpio2 2 1>;
	- };
	-
	- power {
	- label = "rt-n14u:blue:power";
	- gpios = <&gpio2 3 1>;
	+ label = "rt-ac51u:blue:usb";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	- air {
	- label = "rt-n14u:blue:air";
	- gpios = <&gpio3 0 1>;
	+ wifi {
	+ label = "rt-ac51u:blue:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,24 +36,27 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	-};

	-&gpio2 {
	- status = "okay";
	-};
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;

	-&gpio3 {
	- status = "okay";
	+ enable-leds {
	+ gpio-export,name = "enable-leds";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	};

	&spi0 {
	@@ -71,7 +67,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -107,7 +102,12 @@
	status = "okay";
	};

	+&gpio3 {
	+ status = "okay";
	+};
	+
	&ethernet {
	+ status = "okay";
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	};
	@@ -118,8 +118,8 @@

	&pinctrl {
	state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "i2c";
	+ gpio {
	+ ralink,group = "i2c", "wled", "uartf";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/RT-G32-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-G32-B1.dts
	+++ sys/gnu/dts/mips/RT-G32-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RT-G32-B1", "ralink,rt3050-soc";
	+ compatible = "asus,rt-g32-b1", "ralink,rt3050-soc";
	model = "Asus RT-G32 B1";

	gpio-keys-polled {
	@@ -14,14 +17,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -34,7 +37,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/RT-N10-PLUS.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N10-PLUS.dts
	+++ sys/gnu/dts/mips/RT-N10-PLUS.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
	+ compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
	model = "Asus RT-N10+";

	cfi@1f000000 {
	@@ -43,7 +46,7 @@

	wps {
	label = "rt-n10-plus:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -55,14 +58,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/RT-N12-PLUS.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N12-PLUS.dts
	+++ sys/gnu/dts/mips/RT-N12-PLUS.dts
	@@ -2,36 +2,38 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
	- model = "Asus RT-N14U";
	+ compatible = "asus,rt-n12p", "ralink,mt7620n-soc";
	+ model = "Asus RT-N12+";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };

	gpio-leds {
	compatible = "gpio-leds";

	wan {
	- label = "rt-n14u:blue:wan";
	- gpios = <&gpio2 0 1>;
	+ label = "rt-n12p:green:wan";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};

	lan {
	- label = "rt-n14u:blue:lan";
	- gpios = <&gpio2 1 1>;
	- };
	-
	- usb {
	- label = "rt-n14u:blue:usb";
	- gpios = <&gpio2 2 1>;
	+ label = "rt-n12p:green:lan";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	power {
	- label = "rt-n14u:blue:power";
	- gpios = <&gpio2 3 1>;
	+ label = "rt-n12p:green:power";
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	air {
	- label = "rt-n14u:blue:air";
	- gpios = <&gpio3 0 1>;
	+ label = "rt-n12p:green:air";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,18 +45,16 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	-
	- wps {
	- label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	&gpio2 {
	status = "okay";
	};
	@@ -71,7 +71,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -99,14 +98,6 @@
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	@@ -119,7 +110,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	default {
	- ralink,group = "ephy", "wled", "i2c";
	+ ralink,group = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/RT-N13U.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N13U.dts
	+++ sys/gnu/dts/mips/RT-N13U.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RT-N13U", "ralink,rt3052-soc";
	+ compatible = "asus,rt-n13u", "ralink,rt3052-soc";
	model = "Asus RT-N13U";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	power {
	label = "rt-n13u:blue:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "rt-n13u:blue:wifi";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/RT-N14U.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N14U.dts
	+++ sys/gnu/dts/mips/RT-N14U.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
	model = "Asus RT-N14U";
	@@ -11,27 +14,27 @@

	wan {
	label = "rt-n14u:blue:wan";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "rt-n14u:blue:lan";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "rt-n14u:blue:usb";
	- gpios = <&gpio2 2 1>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "rt-n14u:blue:power";
	- gpios = <&gpio2 3 1>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	air {
	label = "rt-n14u:blue:air";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,14 +46,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -71,7 +74,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/RT-N15.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N15.dts
	+++ sys/gnu/dts/mips/RT-N15.dts
	@@ -2,10 +2,13 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "RT-N15", "ralink,rt2880-soc";
	+ compatible = "asus,rt-n15", "ralink,rt2880-soc";
	model = "Asus RT-N15";

	cfi@1f000000 {
	@@ -42,8 +45,8 @@

	rtl8366s {
	compatible = "realtek,rtl8366s";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

	gpio-keys-polled {
	@@ -54,14 +57,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 12 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -70,7 +73,7 @@

	power {
	label = "rt-n15:blue:power";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/RT-N56U.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N56U.dts
	+++ sys/gnu/dts/mips/RT-N56U.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RT-N56U", "ralink,rt3883-soc";
	+ compatible = "asus,rt-n56u", "ralink,rt3883-soc";
	model = "Asus RT-N56U";

	nor-flash@1c000000 {
	@@ -39,8 +42,8 @@

	rtl8367 {
	compatible = "realtek,rtl8367";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
	};

	@@ -52,14 +55,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -68,22 +71,22 @@

	power {
	label = "rt-n56u:blue:power";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "rt-n56u:blue:lan";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "rt-n56u:blue:wan";
	- gpios = <&gpio1 3 1>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "rt-n56u:blue:usb";
	- gpios = <&gpio1 0 1>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -125,10 +128,10 @@
	pci-bridge@1 {
	status = "okay";

	- wmac@0,0 {
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ wifi@1814,3091 {
	+ compatible = "pci1814,3091";
	+ reg = <0x10000 0 0 0 0>;
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	===================================================================
	--- sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	+++ sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	@@ -1,9 +1,11 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "RT5350F-OLINUXINO.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>

	/ {
	- compatible = "RT5350F-OLINUXINO-EVB", "ralink,rt5350-soc";
	+ compatible = "olimex,rt5350f-olinuxino-evb", "ralink,rt5350-soc";
	model = "Olimex RT5350F-OLinuXino-EVB";

	gpio_export {
	@@ -13,88 +15,18 @@
	relay1 {
	gpio-export,name = "relay1";
	gpio-export,output = <0>;
	- gpios = <&gpio0 14 0>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	};

	relay2 {
	gpio-export,name = "relay2";
	gpio-export,output = <0>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};

	button {
	gpio-export,name = "button";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};
	};
	};
	-
	-&spi0 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	-};
	-
	-&gpio1 {
	- status = "okay";
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	===================================================================
	--- sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	+++ sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	@@ -1,78 +1,8 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "RT5350F-OLINUXINO.dtsi"

	/ {
	- compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
	+ compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
	model = "Olimex RT5350F-OLinuXino";
	};
	-
	-&spi0 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	-};
	-
	-&gpio1 {
	- status = "okay";
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/RT5350F-OLINUXINO.dtsi
	===================================================================
	--- sys/gnu/dts/mips/RT5350F-OLINUXINO.dtsi
	+++ sys/gnu/dts/mips/RT5350F-OLINUXINO.dtsi
	@@ -1,19 +1,14 @@
	-/dts-v1/;
	-
	#include "rt5350.dtsi"

	/ {
	- compatible = "WIZARD8800", "ralink,rt5350-soc";
	- model = "EASYACC WI-STOR WIZARD 8800";
	-};
	+ compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";

	-&gpio0 {
	- status = "okay";
	+ aliases {
	+ serial0 = &uartlite;
	+ serial1 = &uart;
	+ };
	};

	-&gpio1 {
	- status = "okay";
	-};

	&spi0 {
	status = "okay";
	@@ -23,7 +18,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -51,12 +45,20 @@
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "jtag", "rgmii", "mdio";
	ralink,function = "gpio";
	};
	+ uartf_gpio {
	+ ralink,group = "uartf";
	+ ralink,function = "gpio uartf";
	+ };
	};
	};

	@@ -66,6 +68,12 @@

	&esw {
	mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <0x17>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	};

	&ehci {
	@@ -76,6 +84,11 @@
	status = "okay";
	};

	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	+&i2c {
	+ status = "okay";
	};
	+
	+&uart {
	+ status = "okay";
	+};
	+
	Index: sys/gnu/dts/mips/RUT5XX.dts
	===================================================================
	--- sys/gnu/dts/mips/RUT5XX.dts
	+++ sys/gnu/dts/mips/RUT5XX.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RUT5XX", "ralink,rt3050-soc";
	+ compatible = "teltonika,rut5xx", "ralink,rt3050-soc";
	model = "Teltonika RUT5XX";

	gpio-leds {
	@@ -11,7 +14,7 @@

	status {
	label = "rut5xx:green:status";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,7 +40,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "n25q128a13";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/SAP-G3200U3.dts
	===================================================================
	--- sys/gnu/dts/mips/SAP-G3200U3.dts
	+++ sys/gnu/dts/mips/SAP-G3200U3.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "storylink,sap-g3200u3", "mediatek,mt7621-soc";
	model = "STORYLiNK SAP-G3200U3";

	memory@0 {
	@@ -20,7 +23,7 @@

	usb {
	label = "sap-g3200u3:green:usb";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +35,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 16 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	rfkill {
	label = "rfkill";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -52,8 +55,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -94,7 +97,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -103,7 +106,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/SK-WB8.dts
	===================================================================
	--- sys/gnu/dts/mips/SK-WB8.dts
	+++ sys/gnu/dts/mips/SK-WB8.dts
	@@ -1,9 +1,11 @@
	/dts-v1/;

	#include "mt7621.dtsi"
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>

	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "samknows,whitebox-v8", "mediatek,mt7621-soc";
	model = "SamKnows Whitebox 8";

	memory@0 {
	@@ -20,12 +22,12 @@

	wps {
	label = "sk-wb8:green:wps";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "sk-wb8:green:usb";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -36,13 +38,13 @@
	poll-interval = <20>;
	wps {
	label = "wps";
	- gpios = <&gpio1 11 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	reset {
	label = "reset";
	- gpios = <&gpio1 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -55,8 +57,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -77,12 +79,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	-
	- partition@e30000 {
	- label = "recovery";
	- reg = <0xe30000 0x1d0000>;
	+ reg = <0x50000 0xfb0000>;
	};

	};
	@@ -96,7 +93,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -105,7 +102,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/SL-R7205.dts
	===================================================================
	--- sys/gnu/dts/mips/SL-R7205.dts
	+++ sys/gnu/dts/mips/SL-R7205.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "SL-R7205", "ralink,rt3052-soc";
	+ compatible = "skyline,sl-r7205", "ralink,rt3052-soc";
	model = "Skyline SL-R7205 Wireless 3G Router";

	cfi@1f000000 {
	@@ -43,7 +46,7 @@

	wifi {
	label = "sl-r7205:green:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -55,14 +58,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/TEW-638APB-V2.dts
	===================================================================
	--- sys/gnu/dts/mips/TEW-638APB-V2.dts
	+++ sys/gnu/dts/mips/TEW-638APB-V2.dts
	@@ -2,13 +2,16 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WCR150GN", "ralink,rt3050-soc";
	- model = "Sparklan WCR-150GN";
	+ compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
	+ model = "TRENDnet TEW-638APB v2";

	cfi@1f000000 {
	compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	+ reg = <0x1f000000 0x400000>;
	bank-width = <2>;
	device-width = <2>;
	#address-cells = <1>;
	@@ -38,36 +41,36 @@
	};
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- user {
	- label = "wcr-150gn:amber:user";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- power {
	- label = "wcr-150gn:amber:power";
	- gpios = <&gpio0 8 1>;
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	wps {
	label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	+ };

	- reset {
	- label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wps {
	+ label = "tew-638apb-v2:orange:wps";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps2 {
	+ label = "tew-638apb-v2:green:wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -75,7 +78,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "uartf";
	ralink,function = "gpio";
	};
	};
	@@ -92,7 +95,3 @@
	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-
	-&otg {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/TEW-691GR.dts
	===================================================================
	--- sys/gnu/dts/mips/TEW-691GR.dts
	+++ sys/gnu/dts/mips/TEW-691GR.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "TEW-691GR", "ralink,rt3883-soc";
	+ compatible = "trendnet,tew-691gr", "ralink,rt3883-soc";
	model = "TRENDnet TEW-691GR";

	nor-flash@1c000000 {
	@@ -45,20 +48,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	rfkill {
	label = "rfkill";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};

	@@ -67,7 +70,7 @@

	wps {
	label = "tew-691gr:green:wps";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -86,7 +89,7 @@
	};

	&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	+ mtd-mac-address = <&factory 0x4>;

	port@0 {
	phy-handle = <&phy0>;
	@@ -98,10 +101,15 @@

	phy0: ethernet-phy@0 {
	reg = <0>;
	+ phy-mode = "rgmii";
	};
	};
	};

	&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x0>;
	ralink,5ghz = <0>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mtd-mac-address-increment = <1>;
	};
	Index: sys/gnu/dts/mips/TEW-692GR.dts
	===================================================================
	--- sys/gnu/dts/mips/TEW-692GR.dts
	+++ sys/gnu/dts/mips/TEW-692GR.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "TEW-692GR", "ralink,rt3883-soc";
	+ compatible = "trendnet,tew-692gr", "ralink,rt3883-soc";
	model = "TRENDnet TEW-692GR";

	nor-flash@1c000000 {
	@@ -45,14 +48,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -61,12 +64,12 @@

	wps {
	label = "tew-692gr:orange:wps";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps2 {
	label = "tew-692gr:green:wps";
	- gpios = <&gpio1 4 1>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -86,7 +89,7 @@

	&ethernet {
	status = "okay";
	- mtd-mac-address = <&factory 0x28>;
	+ mtd-mac-address = <&factory 0x4>;

	port@0 {
	phy-handle = <&phy0>;
	@@ -98,6 +101,19 @@

	phy0: ethernet-phy@0 {
	reg = <0>;
	+ phy-mode = "rgmii";
	+
	+ qca,ar8327-initvals = <
	+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
	+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
	+ 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
	+ 0x50 0xc437c437 /* LED Control Register 0 */
	+ 0x54 0xc337c337 /* LED Control Register 1 */
	+ 0x58 0x00000000 /* LED Control Register 2 */
	+ 0x5c 0x03ffff00 /* LED Control Register 3 */
	+ 0x7c 0x0000007e /* PORT0_STATUS */
	+ 0x94 0x0000007e /* PORT6 STATUS */
	+ >;
	};
	};
	};
	@@ -117,10 +133,20 @@
	host-bridge {
	pci-bridge@1 {
	status = "okay";
	+
	+ wifi@0,0 {
	+ compatible = "pci0,0";
	+ reg = < 0x10000 0 0 0 0 >;
	+ ralink,2ghz = <0>;
	+ };
	};
	};
	};

	&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x0>;
	ralink,5ghz = <0>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mtd-mac-address-increment = <3>;
	};
	Index: sys/gnu/dts/mips/TEW-714TRU.dts
	===================================================================
	--- sys/gnu/dts/mips/TEW-714TRU.dts
	+++ sys/gnu/dts/mips/TEW-714TRU.dts
	@@ -2,21 +2,24 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MPRA2", "ralink,rt5350-soc";
	- model = "HAME MPR-A2";
	+ compatible = "trendnet,tew-714tru", "ralink,rt5350-soc";
	+ model = "TRENDnet TEW714TRU";

	gpio-leds {
	compatible = "gpio-leds";

	- system {
	- label = "mpr-a2:blue:system";
	- gpios = <&gpio0 20 1>;
	+ usb {
	+ label = "tew-714tru:red:usb";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	- power {
	- label = "mpr-a2:red:power";
	- gpios = <&gpio0 17 1>;
	+ wifi {
	+ label = "tew-714tru:green:wifi";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -26,27 +29,31 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	};

	gpio_export {
	compatible = "gpio-export";
	#size-cells = <0>;

	- usb {
	- gpio-export,name = "usb";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ repeater {
	+ gpio-export,name = "repeater_switch";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	- root_hub {
	- gpio-export,name = "root_hub";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ wisp {
	+ gpio-export,name = "wisp_switch";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -59,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -90,7 +96,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "i2c", "jtag", "uartf";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/TINY-AC.dts
	===================================================================
	--- sys/gnu/dts/mips/TINY-AC.dts
	+++ sys/gnu/dts/mips/TINY-AC.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "TINY-AC", "ralink,mt7620a-soc";
	+ compatible = "dovado,tiny-ac", "ralink,mt7620a-soc";
	model = "Dovado Tiny AC";

	chosen {
	@@ -15,12 +18,12 @@

	usb {
	label = "tiny-ac:green:usb";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "tiny-ac:orange:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	};
	@@ -33,8 +36,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	};
	@@ -46,7 +49,7 @@
	usbpower {
	gpio-export,name = "usbpower";
	gpio-export,output = <1>;
	- gpios = <&gpio2 5 0>;
	+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -71,7 +74,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -145,10 +147,6 @@
	mediatek,mt7530 = <1>;
	};

	-&wmac {
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	-};
	-
	&pcie {
	status = "okay";
	};
	Index: sys/gnu/dts/mips/TL-MR3420V5.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-MR3420V5.dts
	@@ -0,0 +1,86 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-mr3420-v5", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-MR3420 v5";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "tl-mr3420-v5:green:lan";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "tl-mr3420-v5:green:power";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "tl-mr3420-v5:green:usb";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "tl-mr3420-v5:green:wan";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_amber {
	+ label = "tl-mr3420-v5:amber:wan";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-mr3420-v5:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-mr3420-v5:green:wps";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR840NV4.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR840NV4.dts
	@@ -0,0 +1,62 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr840n-v4", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR840N v4";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "tl-wr840n-v4:green:lan";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "tl-wr840n-v4:green:power";
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "tl-wr840n-v4:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-wr840n-v4:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-wr840n-v4:green:wps";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "p0led_an", "p2led_an", "perst", "refclk", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR840NV5.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR840NV5.dts
	@@ -0,0 +1,105 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr840n-v5", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR840N v5";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+ /* LED used is dual-color,dual lead LED */
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "tl-wr840n-v5:green:power";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ orange {
	+ label = "tl-wr840n-v5:orange:power";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x3d0000>;
	+ };
	+
	+ factory: partition@3f0000 {
	+ label = "factory";
	+ reg = <0x3f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "disabled";
	+};
	+
	+&ohci {
	+ status = "disabled";
	+};
	+
	+&wmac {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0xf100>;
	+ mediatek,mtd-eeprom = <&factory 0x10000>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xf100>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "p0led_an", "p2led_an", "perst";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR841NV13.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR841NV13.dts
	@@ -0,0 +1,88 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr841n-v13", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR841N v13";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "tl-wr841n-v13:green:power";
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-wr841n-v13:green:wps";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan1 {
	+ label = "tl-wr841n-v13:green:lan1";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2 {
	+ label = "tl-wr841n-v13:green:lan2";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan3 {
	+ label = "tl-wr841n-v13:green:lan3";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan4 {
	+ label = "tl-wr841n-v13:green:lan4";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_green {
	+ label = "tl-wr841n-v13:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_orange {
	+ label = "tl-wr841n-v13:orange:wan";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-wr841n-v13:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "perst", "refclk", "uart1", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR842NV5.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR842NV5.dts
	@@ -0,0 +1,86 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr842n-v5", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR842N v5";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "tl-wr842n-v5:green:lan";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "tl-wr842n-v5:green:power";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "tl-wr842n-v5:green:usb";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "tl-wr842n-v5:green:wan";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_amber {
	+ label = "tl-wr842n-v5:amber:wan";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-wr842n-v5:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-wr842n-v5:green:wps";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR902ACV3.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR902ACV3.dts
	@@ -0,0 +1,108 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR902AC v3";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ sw1 {
	+ label = "sw1";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+
	+ sw2 {
	+ label = "sw2";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "tl-wr902ac-v3:green:lan";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power {
	+ label = "tl-wr902ac-v3:green:power";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "tl-wr902ac-v3:green:usb";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "tl-wr902ac-v3:green:wan";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-wr902ac-v3:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-wr902ac-v3:green:wps";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x28000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&factory 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TPLINK-8M.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TPLINK-8M.dtsi
	@@ -0,0 +1,67 @@
	+#include "mt7628an.dtsi"
	+
	+/ {
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7a0000>;
	+ };
	+
	+ partition@7c0000 {
	+ label = "config";
	+ reg = <0x7c0000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@7d0000 {
	+ label = "factory";
	+ reg = <0x7d0000 0x30000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "disabled";
	+};
	+
	+&ohci {
	+ status = "disabled";
	+};
	+
	+&wmac {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0xf100>;
	+ mediatek,mtd-eeprom = <&factory 0x20000>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xf100>;
	+ mediatek,portmap = "llllw";
	+};
	Index: sys/gnu/dts/mips/Timecloud.dts
	===================================================================
	--- sys/gnu/dts/mips/Timecloud.dts
	+++ sys/gnu/dts/mips/Timecloud.dts
	@@ -1,10 +1,18 @@
	/dts-v1/;

	-#include "mt7620a.dtsi"
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "ralink,mt7620a-soc";
	- model = "OY-0001";
	+ compatible = "thunder,timecloud", "mediatek,mt7621-soc";
	+ model = "Thunder Timecloud";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -13,15 +21,16 @@
	gpio-leds {
	compatible = "gpio-leds";

	- powerled {
	- label = "oy-0001:green:power";
	- gpios = <&gpio0 9 1>;
	+ statw {
	+ label = "timecloud:white:status";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	- wifiled {
	- label = "oy-0001:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ stato {
	+ label = "timecloud:orange:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	};
	+
	};

	gpio-keys-polled {
	@@ -30,20 +39,25 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- s1 {
	+ reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ BTN_0 {
	+ label = "BTN_0";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};

	-&gpio2 {
	+&sdhci {
	status = "okay";
	-};

	-&gpio3 {
	- status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	};

	&spi0 {
	@@ -54,8 +68,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -82,41 +96,15 @@
	};
	};

	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,group = "i2c", "uart2", "jtag";
	ralink,function = "gpio";
	};
	};
	};
	-
	-&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mediatek,portmap = "llllw";
	-};
	-
	-&gsw {
	- mediatek,port4 = "ephy";
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&sdhci {
	- status = "okay";
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	-&pcie {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/U25AWF-H1.dts
	===================================================================
	--- sys/gnu/dts/mips/U25AWF-H1.dts
	+++ sys/gnu/dts/mips/U25AWF-H1.dts
	@@ -1,10 +1,13 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "mt7620a.dtsi"

	-/ {
	- compatible = "wt3020", "ralink,mt7620n-soc";
	- model = "Nexx WT3020";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/{
	+ compatible = "kimax,u25awf-h1","ralink,mt7620a-soc";
	+ model = "Kimax U25AWF-H1";

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -14,17 +17,22 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	gpio-leds {
	compatible = "gpio-leds";

	- power {
	- label = "wt3020:blue:power";
	- gpios = <&gpio3 0 0>;
	+ wifi {
	+ label = "u25awf:red:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan {
	+ label = "u25awf:green:lan";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -45,7 +53,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -68,7 +75,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0xfb0000>;
	};
	};
	};
	@@ -83,7 +90,6 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	};

	&wmac {
	@@ -93,7 +99,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	+ ralink,group = "uartf", "ephy", "wled";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/U7621-06-256M-16M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/U7621-06-256M-16M.dts
	@@ -0,0 +1,86 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "U7621-06.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "unielec,u7621-06-256m-16m", "unielec,u7621-06", "mediatek,mt7621-soc";
	+ model = "UniElec U7621-06 (256M RAM/16M flash)";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <14000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "bootloader";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ firmware: partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/U7621-06.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/U7621-06.dtsi
	@@ -0,0 +1,117 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "unielec,u7621-06", "mediatek,mt7621-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ modem_reset {
	+ gpio-export,name = "modem_reset";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "u7621-06:green:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ led4 {
	+ label = "u7621-06:green:led4";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ led5 {
	+ label = "u7621-06:green:led5";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&sdhci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "jtag", "uart2", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/U7628-01-128M-16M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/U7628-01-128M-16M.dts
	@@ -0,0 +1,83 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "U7628-01.dtsi"
	+
	+/ {
	+ compatible = "unielec,u7628-01-128m-16m", "unielec,u7628-01", "mediatek,mt7628an-soc";
	+ model = "UniElec U7628-01 (128M RAM/16M flash)";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <12000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "bootloader";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/U7628-01.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/U7628-01.dtsi
	@@ -0,0 +1,132 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "unielec,u7628-01", "mediatek,mt7628an-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "u7628-01:green:power";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "u7628-01:green:wlan";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "u7628-01:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan1 {
	+ label = "u7628-01:green:lan1";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2 {
	+ label = "u7628-01:green:lan2";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan3 {
	+ label = "u7628-01:green:lan3";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan4 {
	+ label = "u7628-01:green:lan4";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "u7628-01:green:usb";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/UBNT-ER-e50.dtsi
	===================================================================
	--- sys/gnu/dts/mips/UBNT-ER-e50.dtsi
	+++ sys/gnu/dts/mips/UBNT-ER-e50.dtsi
	@@ -1,12 +1,10 @@
	-#include <dt-bindings/input/input.h>
	-
	-/dts-v1/;
	-
	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "UBNT-ERX";
	+ compatible = "ubiquiti,edgerouterx", "mediatek,mt7621-soc";

	memory@0 {
	device_type = "memory";
	@@ -17,43 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- nand@1e003000 {
	- status = "okay";
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x80000>;
	- read-only;
	- };
	-
	- partition@80000 {
	- label = "u-boot-env";
	- reg = <0x80000 0x60000>;
	- read-only;
	- };
	-
	- factory: partition@e0000 {
	- label = "factory";
	- reg = <0xe0000 0x60000>;
	- };
	-
	- partition@140000 {
	- label = "kernel1";
	- reg = <0x140000 0x300000>;
	- };
	-
	- partition@440000 {
	- label = "kernel2";
	- reg = <0x440000 0x300000>;
	- };
	-
	- partition@740000 {
	- label = "ubi";
	- reg = <0x740000 0xf7c0000>;
	- };
	-
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -62,7 +23,7 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_RESTART>;
	};
	};
	@@ -72,6 +33,42 @@
	mtd-mac-address = <&factory 0x22>;
	};

	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@80000 {
	+ label = "u-boot-env";
	+ reg = <0x80000 0x60000>;
	+ read-only;
	+ };
	+
	+ factory: partition@e0000 {
	+ label = "factory";
	+ reg = <0xe0000 0x60000>;
	+ };
	+
	+ partition@140000 {
	+ label = "kernel1";
	+ reg = <0x140000 0x300000>;
	+ };
	+
	+ partition@440000 {
	+ label = "kernel2";
	+ reg = <0x440000 0x300000>;
	+ };
	+
	+ partition@740000 {
	+ label = "ubi";
	+ reg = <0x740000 0xf7c0000>;
	+ };
	+};
	+
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	@@ -81,27 +78,20 @@
	};
	};

	-&sdhci {
	- status = "disabled";
	-};
	-
	-&pcie {
	- status = "disabled";
	-};
	-
	&spi0 {
	/* This board has 2Mb spi flash soldered in and visible
	from manufacturer's firmware.
	But this SoC shares spi and nand pins,
	and current driver does't handle this sharing well */
	status = "disabled";
	+
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <1>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "spi";
	@@ -110,3 +100,7 @@
	};
	};
	};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/UBNT-ERX-SFP.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/UBNT-ERX-SFP.dts
	@@ -0,0 +1,24 @@
	+/dts-v1/;
	+
	+#include "UBNT-ER-e50.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ model = "UBNT-ERX-SFP";
	+ compatible = "ubiquiti,edgerouterx-sfp", "mediatek,mt7621-soc";
	+
	+ i2c-gpio {
	+ compatible = "i2c-gpio";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* sda */
	+ &gpio0 4 GPIO_ACTIVE_HIGH /* scl */
	+ >;
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ pca9555@25 {
	+ compatible = "pca9555";
	+ reg = <0x25>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/UBNT-ERX.dts
	===================================================================
	--- sys/gnu/dts/mips/UBNT-ERX.dts
	+++ sys/gnu/dts/mips/UBNT-ERX.dts
	@@ -1,112 +1,7 @@
	-#include <dt-bindings/input/input.h>
	-
	/dts-v1/;

	-#include "mt7621.dtsi"
	+#include "UBNT-ER-e50.dtsi"

	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	model = "UBNT-ERX";
	-
	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x10000000>;
	- };
	-
	- chosen {
	- bootargs = "console=ttyS0,57600";
	- };
	-
	- nand@1e003000 {
	- status = "okay";
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x80000>;
	- read-only;
	- };
	-
	- partition@80000 {
	- label = "u-boot-env";
	- reg = <0x80000 0x60000>;
	- read-only;
	- };
	-
	- factory: partition@e0000 {
	- label = "factory";
	- reg = <0xe0000 0x60000>;
	- };
	-
	- partition@140000 {
	- label = "kernel1";
	- reg = <0x140000 0x300000>;
	- };
	-
	- partition@440000 {
	- label = "kernel2";
	- reg = <0x440000 0x300000>;
	- };
	-
	- partition@740000 {
	- label = "ubi";
	- reg = <0x740000 0xf7c0000>;
	- };
	-
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <KEY_RESTART>;
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x22>;
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&sdhci {
	- status = "disabled";
	-};
	-
	-&pcie {
	- status = "disabled";
	-};
	-
	-&spi0 {
	- /* This board has 2Mb spi flash soldered in and visible
	- from manufacturer's firmware.
	- But this SoC shares spi and nand pins,
	- and current driver does't handle this sharing well */
	- status = "disabled";
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <1>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "spi";
	- reg = <0x0 0x200000>;
	- read-only;
	- };
	- };
	};
	Index: sys/gnu/dts/mips/UR-326N4G.dts
	===================================================================
	--- sys/gnu/dts/mips/UR-326N4G.dts
	+++ sys/gnu/dts/mips/UR-326N4G.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "UR-326N4G", "ralink,rt3052-soc";
	+ compatible = "upvel,ur-326n4g", "ralink,rt3052-soc";
	model = "UPVEL UR-326N4G";

	cfi@1f000000 {
	@@ -43,27 +46,27 @@

	3g {
	label = "ur-326n4g:green:3g";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	gateway {
	label = "ur-326n4g:green:gateway";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	ap {
	label = "ur-326n4g:green:ap";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "ur-326n4g:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	station {
	label = "ur-326n4g:green:station";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -75,14 +78,14 @@

	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x32>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/UR-336UN.dts
	===================================================================
	--- sys/gnu/dts/mips/UR-336UN.dts
	+++ sys/gnu/dts/mips/UR-336UN.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "UR-336UN", "ralink,rt3052-soc";
	+ compatible = "upvel,ur-336un", "ralink,rt3052-soc";
	model = "UPVEL UR-336UN";

	cfi@1f000000 {
	@@ -13,6 +16,29 @@
	device-width = <2>;
	#address-cells = <1>;
	#size-cells = <1>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};

	gpio-leds {
	@@ -20,27 +46,27 @@

	3g {
	label = "ur-336un:green:3g";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	gateway {
	label = "ur-336un:green:gateway";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	ap {
	label = "ur-336un:green:ap";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "ur-336un:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	station {
	label = "ur-336un:green:station";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -52,14 +78,14 @@

	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x32>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	@@ -73,20 +99,18 @@
	};
	};

	-/* FIXME: no partitions defined */
	-/*&ethernet {
	+&ethernet {
	mtd-mac-address = <&factory 0x4004>;
	};
	-*/
	+
	&esw {
	mediatek,portmap = <0x2f>;
	};

	-/* FIXME: no partitions defined */
	-/*&wmac {
	+&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-*/
	+
	&otg {
	status = "okay";
	};
	Index: sys/gnu/dts/mips/V11STFE.dts
	===================================================================
	--- sys/gnu/dts/mips/V11STFE.dts
	+++ sys/gnu/dts/mips/V11STFE.dts
	@@ -2,8 +2,11 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "V11ST-FE", "ralink,rt2880-soc";
	+ compatible = "ralink,v11st-fe", "ralink,rt2880-soc";
	model = "Ralink V11ST-FE";

	pci@440000 {
	@@ -55,8 +58,8 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -65,7 +68,7 @@

	status {
	label = "v11st-fe:green:status";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/V22RW-2X2.dts
	===================================================================
	--- sys/gnu/dts/mips/V22RW-2X2.dts
	+++ sys/gnu/dts/mips/V22RW-2X2.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "V22RW-2X2", "ralink,rt3052-soc";
	+ compatible = "ralink,v22rw-2x2", "ralink,rt3052-soc";
	model = "Ralink AP-RT3052-V22RW-2X2";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	security {
	label = "v22rw-2x2:green:security";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "v22rw-2x2:red:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/VAR11N-300.dts
	===================================================================
	--- sys/gnu/dts/mips/VAR11N-300.dts
	+++ sys/gnu/dts/mips/VAR11N-300.dts
	@@ -2,9 +2,21 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "wt3020", "ralink,mt7620n-soc";
	- model = "Nexx WT3020";
	+ compatible = "vonets,var11n-300", "ralink,mt7620n-soc";
	+ model = "Vonets VAR11N-300";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ system {
	+ label = "var11n-300:blue:system";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ };
	+ };

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -14,26 +26,13 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "wt3020:blue:power";
	- gpios = <&gpio3 0 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&gpio2 {
	- status = "okay";
	-};
	-
	-&gpio3 {
	+&gpio0 {
	status = "okay";
	};

	@@ -45,7 +44,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -73,17 +71,9 @@
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	+ mediatek,portmap = "llllw";
	};

	&wmac {
	@@ -93,7 +83,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	+ ralink,group = "i2c";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/VOCORE-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/VOCORE-16M.dts
	+++ sys/gnu/dts/mips/VOCORE-16M.dts
	@@ -2,6 +2,11 @@

	#include "VOCORE.dtsi"

	+/ {
	+ compatible = "vocore,vocore-16m", "vocore,vocore", "ralink,rt5350-soc";
	+ model = "VoCore (16M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/VOCORE-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/VOCORE-8M.dts
	+++ sys/gnu/dts/mips/VOCORE-8M.dts
	@@ -2,6 +2,11 @@

	#include "VOCORE.dtsi"

	+/ {
	+ compatible = "vocore,vocore-8m", "vocore,vocore", "ralink,rt5350-soc";
	+ model = "VoCore (8M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/VOCORE.dtsi
	===================================================================
	--- sys/gnu/dts/mips/VOCORE.dtsi
	+++ sys/gnu/dts/mips/VOCORE.dtsi
	@@ -1,8 +1,9 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "VoCore", "ralink,rt5350-soc";
	- model = "VoCore";
	+ compatible = "vocore,vocore", "ralink,rt5350-soc";

	gpio-export {
	compatible = "gpio-export";
	@@ -11,7 +12,7 @@
	gpio0 {
	gpio-export,name = "gpio0";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 0 0>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};

	/* UARTF */
	@@ -19,42 +20,42 @@
	/* UARTF_RTS_N */
	gpio-export,name = "gpio7";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	gpio8 {
	/* UARTF_TXD */
	gpio-export,name = "gpio8";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 8 0>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	};

	gpio9 {
	/* UARTF_CTS_N */
	gpio-export,name = "gpio9";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};

	gpio12 {
	/* UARTF_DCD_N */
	gpio-export,name = "gpio12";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};

	gpio13 {
	/* UARTF_DSR_N */
	gpio-export,name = "gpio13";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};

	gpio14 {
	/* UARTF_RIN */
	gpio-export,name = "gpio14";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 14 0>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	};

	/* JTAG */
	@@ -62,35 +63,35 @@
	/* JTAG_TDO */
	gpio-export,name = "gpio17";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 17 0>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
	};

	gpio18 {
	/* JTAG_TDI */
	gpio-export,name = "gpio18";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 18 0>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	};

	gpio19 {
	/* JTAG_TMS */
	gpio-export,name = "gpio19";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 19 0>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
	};

	gpio20 {
	/* JTAG_TCLK */
	gpio-export,name = "gpio20";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 20 0>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
	};

	gpio21 {
	/* JTAG_TRST_N */
	gpio-export,name = "gpio21";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 21 0>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
	};

	/* ETH LEDs */
	@@ -98,35 +99,35 @@
	/* ETH0_LED */
	gpio-export,name = "gpio22";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 0 0>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
	};

	gpio23 {
	/* ETH1_LED */
	gpio-export,name = "gpio23";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 1 0>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
	};

	gpio24 {
	/* ETH2_LED */
	gpio-export,name = "gpio24";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 2 0>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	};

	gpio25 {
	/* ETH3_LED */
	gpio-export,name = "gpio25";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 3 0>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	};

	gpio26 {
	/* ETH4_LED */
	gpio-export,name = "gpio26";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 4 0>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -136,13 +137,13 @@
	status {
	/* UARTF_RXD */
	label = "vocore:green:status";
	- gpios = <&gpio0 10 0>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	};

	eth {
	/* UARTF_DTR_N */
	label = "vocore:orange:eth";
	- gpios = <&gpio0 11 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/VOCORE2.dts
	===================================================================
	--- sys/gnu/dts/mips/VOCORE2.dts
	+++ sys/gnu/dts/mips/VOCORE2.dts
	@@ -1,6 +1,22 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "VOCORE2.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
	+ model = "VoCore2";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "vocore2:fuchsia:status";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};

	&spi0 {
	status = "okay";
	@@ -10,8 +26,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -33,7 +49,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x3b0000>;
	+ reg = <0x50000 0xfb0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/VOCORE2.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/VOCORE2.dtsi
	@@ -0,0 +1,53 @@
	+#include "mt7628an.dtsi"
	+
	+/ {
	+ compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS2,115200";
	+ };
	+};
	+
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wled_an", "refclk", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x4>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x7>;
	+ mediatek,portdisable = <0x3a>;
	+};
	+
	+&i2s {
	+ status = "okay";
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&pwm {
	+ status = "okay";
	+};
	+
	+&uart1 {
	+ status = "okay";
	+};
	+
	+&uart2 {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/VOCORE2LITE.dts
	===================================================================
	--- sys/gnu/dts/mips/VOCORE2LITE.dts
	+++ sys/gnu/dts/mips/VOCORE2LITE.dts
	@@ -1,6 +1,22 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "VOCORE2.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "vocore,vocore2lite", "vocore,vocore2", "mediatek,mt7628an-soc";
	+ model = "VoCore2-Lite";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "vocore2lite:green:status";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};

	&spi0 {
	status = "okay";
	@@ -10,8 +26,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	Index: sys/gnu/dts/mips/VR500.dts
	===================================================================
	--- sys/gnu/dts/mips/VR500.dts
	+++ sys/gnu/dts/mips/VR500.dts
	@@ -1,17 +1,29 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "X8", "ralink,rt5350-soc";
	- model = "Poray X8";
	+ compatible = "planex,vr500", "mediatek,mt7621-soc";
	+ model = "Planex VR500";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };

	gpio-leds {
	compatible = "gpio-leds";

	power {
	- label = "x8:green:power";
	- gpios = <&gpio0 13 1>;
	+ label = "vr500:green:power";
	+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +35,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,8 +49,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -60,7 +72,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0x3fb0000>;
	};
	};
	};
	@@ -68,30 +80,8 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	ralink,function = "gpio";
	};
	};
	};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/W06.dts
	===================================================================
	--- sys/gnu/dts/mips/W06.dts
	+++ sys/gnu/dts/mips/W06.dts
	@@ -1,22 +1,35 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "HT-TM02", "ralink,rt5350-soc";
	- model = "HooToo HT-TM02";
	+ compatible = "tama,w06", "mediatek,mt7628an-soc";
	+ model = "Tama W06";
	+
	+ memory@0{
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };

	gpio-leds {
	compatible = "gpio-leds";

	- wlan {
	- label = "ht-tm02:blue:wlan";
	- gpios = <&gpio0 7 1>;
	+ wps {
	+ label = "w06:green:wps";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	- lan {
	- label = "ht-tm02:green:lan";
	- gpios = <&gpio0 12 1>;
	+ wan {
	+ label = "w06:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless {
	+ label = "w06:green:wlan";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,23 +41,33 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- modeswitch {
	- label = "modeswitch";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&gpio0 {
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&ohci {
	status = "okay";
	};

	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart1", "p0led_an", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	&spi0 {
	status = "okay";

	@@ -53,8 +76,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -76,37 +99,17 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0xeb0000>;
	};
	- };
	-};

	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	+ partition@f00000 {
	+ label = "user-data";
	+ reg = <0xf00000 0x100000>;
	+ read-only;
	};
	};
	};

	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x10>;
	- mediatek,portdisable = <0x2f>;
	-};
	-
	&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	status = "okay";
	};
	Index: sys/gnu/dts/mips/W150M.dts
	===================================================================
	--- sys/gnu/dts/mips/W150M.dts
	+++ sys/gnu/dts/mips/W150M.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "W150M", "ralink,rt3050-soc";
	+ compatible = "tenda,w150m", "ralink,rt3050-soc";
	model = "Tenda W150M";

	cfi@1f000000 {
	@@ -43,32 +46,32 @@

	3grouter {
	label = "w150m:blue:3grouter";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	ap {
	label = "w150m:blue:ap";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wisprouter {
	label = "w150m:blue:wisprouter";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wirelessrouter {
	label = "w150m:blue:wirelessrouter";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "w150m:blue:3g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wpsreset {
	label = "w150m:blue:wpsreset";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -80,14 +83,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/W2914NSV2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/W2914NSV2.dts
	@@ -0,0 +1,26 @@
	+/dts-v1/;
	+
	+#include "W2914NSV2.dtsi"
	+
	+/ {
	+ model = "WeVO W2914NS v2";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ // Only USB LED is connected to GPIO.
	+ // All of other LEDs are connected directly to
	+ // switch, WiFi chip, Vcc, so they are not controllable
	+ // via GPIO
	+
	+ usb {
	+ label = "w2914nsv2:green:usb";
	+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/W2914NSV2.dtsi
	===================================================================
	--- sys/gnu/dts/mips/W2914NSV2.dtsi
	+++ sys/gnu/dts/mips/W2914NSV2.dtsi
	@@ -1,50 +1,36 @@
	-/dts-v1/;
	-
	#include "mt7621.dtsi"

	-/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Firefly FireWRT";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	- };
	+/ {
	+ compatible = "wevo,w2914ns-v2", "mediatek,mt7621-soc";

	chosen {
	bootargs = "console=ttyS0,57600";
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	- power {
	- label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};

	-&sdhci {
	+&xhci {
	status = "okay";
	};

	@@ -56,8 +42,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -88,20 +74,19 @@
	status = "okay";

	pcie0 {
	- mt76@0,0 {
	+ wifi@14c3,7603 {
	+ compatible = "pci14c3,7603";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	};
	};

	pcie1 {
	- mt76@1,0 {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -113,7 +98,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2";
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/W306R_V20.dts
	===================================================================
	--- sys/gnu/dts/mips/W306R_V20.dts
	+++ sys/gnu/dts/mips/W306R_V20.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "W306R_V20", "ralink,rt3052-soc";
	+ compatible = "tenda,w306r-v2", "ralink,rt3052-soc";
	model = "Tenda W306R V2.0";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	sys {
	label = "w306r-v20:green:sys";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "w306r-v20:green:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	reset {
	label = "RESET/WPS";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/W502U.dts
	===================================================================
	--- sys/gnu/dts/mips/W502U.dts
	+++ sys/gnu/dts/mips/W502U.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "W502U", "ralink,rt3052-soc";
	+ compatible = "alfanetworks,w502u", "ralink,rt3052-soc";
	model = "ALFA Networks W502U";

	chosen {
	@@ -47,12 +50,12 @@

	usb {
	label = "w502u:blue:usb";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "w502u:blue:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -64,14 +67,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WCR-1166DS.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WCR-1166DS.dts
	@@ -0,0 +1,172 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
	+ model = "Buffalo WCR-1166DS";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ aoss {
	+ label = "aoss";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ ap {
	+ label = "ap";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ router_o {
	+ label = "wcr-1166ds:orange:router";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router_g {
	+ label = "wcr-1166ds:green:router";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet_o {
	+ label = "wcr-1166ds:orange:internet";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet_g {
	+ label = "wcr-1166ds:green:internet";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless_o {
	+ label = "wcr-1166ds:orange:wireless";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless_g {
	+ label = "wcr-1166ds:green:wireless";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ diag {
	+ label = "wcr-1166ds:orange:diag";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "wcr-1166ds:green:power";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "disabled";
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,portdisable = <0x27>;
	+};
	+
	+&ohci {
	+ status = "disabled";
	+};
	+
	+&pcie {
	+ status = "okay";
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7c0000>;
	+ };
	+
	+ partition@810000 {
	+ label = "firmware2";
	+ reg = <0x810000 0x7c0000>;
	+ };
	+
	+ partition@fd0000 {
	+ label = "glbcfg";
	+ reg = <0xfd0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@fe0000 {
	+ label = "board_data";
	+ reg = <0xfe0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/WCR150GN.dts
	===================================================================
	--- sys/gnu/dts/mips/WCR150GN.dts
	+++ sys/gnu/dts/mips/WCR150GN.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WCR150GN", "ralink,rt3050-soc";
	+ compatible = "sparklan,wcr150gn", "ralink,rt3050-soc";
	model = "Sparklan WCR-150GN";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	user {
	label = "wcr-150gn:amber:user";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wcr-150gn:amber:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WD03.dts
	===================================================================
	--- sys/gnu/dts/mips/WD03.dts
	+++ sys/gnu/dts/mips/WD03.dts
	@@ -1,10 +1,13 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "cf-wr800n", "ralink,mt7620n-soc";
	- model = "Comfast CF-WR800N";
	+ compatible = "ravpower,wd03", "ralink,mt7620a-soc";
	+ model = "Ravpower WD03";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -13,19 +16,15 @@
	gpio-leds {
	compatible = "gpio-leds";

	- ethernet {
	- label = "cf-wr800n:white:ethernet";
	- gpios = <&gpio2 4 1>;
	+ green-wifi {
	+ label = "wd03:green:wifi";
	+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
	};

	- wifi {
	- label = "cf-wr800n:white:wifi";
	- gpios = <&gpio3 0 1>;
	- };

	- wps {
	- label = "cf-wr800n:white:wps";
	- gpios = <&gpio1 15 1>;
	+ blue-wifi {
	+ label = "wd03:blue:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -37,20 +36,12 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&gpio0 {
	- status = "okay";
	-};
	-
	-&gpio1 {
	- status = "okay";
	-};
	-
	&gpio2 {
	status = "okay";
	};
	@@ -67,7 +58,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -95,8 +85,17 @@
	};
	};

	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	+ mtd-mac-address = <&factory 0x4000>;
	+ ralink,port-map = "wllll";
	};

	&wmac {
	@@ -105,8 +104,8 @@

	&pinctrl {
	state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "spi refclk", "i2c";
	+ gpio {
	+ ralink,group = "wled", "ephy";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/WE1026-5G-16M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WE1026-5G-16M.dts
	@@ -0,0 +1,76 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "WE1026-5G.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,we1026-5g-16m", "ralink,mt7620a-soc";
	+ model = "ZBT WE1026-5G (16M)";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ en25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ firmware: partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/WE1026-5G.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WE1026-5G.dtsi
	@@ -0,0 +1,124 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "zbtlink,we1026-5g", "ralink,mt7620a-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ lan {
	+ label = "we1026-5g:green:lan";
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "we1026-5g:green:usb";
	+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wifi {
	+ label = "we1026-5g:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "spi refclk", "ephy", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+ pcie-bridge {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	+ reg = <0x0000 0 0 0 0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/WF-2881.dts
	===================================================================
	--- sys/gnu/dts/mips/WF-2881.dts
	+++ sys/gnu/dts/mips/WF-2881.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "netis,wf-2881", "mediatek,mt7621-soc";
	model = "NETIS WF-2881";

	memory@0 {
	@@ -15,50 +18,17 @@
	bootargs = "console=ttyS0,57600";
	};

	- nand@1e003000 {
	- status = "okay";
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x1000>;
	- read-only;
	- };
	-
	- partition@80000 {
	- label = "config";
	- reg = <0x80000 0x80000>;
	- read-only;
	- };
	-
	- factory: partition@100000 {
	- label = "factory";
	- reg = <0x100000 0x40000>;
	- read-only;
	- };
	-
	- partition@140000 {
	- label = "firmware";
	- reg = <0x140000 0x7E40000>;
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	usb {
	label = "wf-2881:green:usb";
	- gpios = <&gpio0 6 1>;
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "wf-2881:green:wps";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,14 +40,43 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&spi0 {
	- status="disabled";
	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x1000>;
	+ read-only;
	+ };
	+
	+ partition@80000 {
	+ label = "config";
	+ reg = <0x80000 0x80000>;
	+ read-only;
	+ };
	+
	+ factory: partition@100000 {
	+ label = "factory";
	+ reg = <0x100000 0x40000>;
	+ read-only;
	+ };
	+
	+ partition@140000 {
	+ label = "firmware";
	+ reg = <0x140000 0x7E40000>;
	+ };
	};

	&pcie {
	@@ -88,7 +87,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -97,7 +96,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WHR-1166D.dts
	===================================================================
	--- sys/gnu/dts/mips/WHR-1166D.dts
	+++ sys/gnu/dts/mips/WHR-1166D.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc";
	model = "Buffalo WHR-1166D";

	gpio-leds {
	@@ -11,37 +14,37 @@

	power {
	label = "whr-1166d:red:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "whr-1166d:green:wifi";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "whr-1166d:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "whr-1166d:orange:wifi";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "whr-1166d:green:internet";
	- gpios = <&gpio2 17 1>;
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "whr-1166d:orange:router";
	- gpios = <&gpio2 18 1>;
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	};

	router2 {
	label = "whr-1166d:green:router";
	- gpios = <&gpio2 19 1>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,28 +56,28 @@

	reset {
	label = "reset";
	- gpios = <&gpio2 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio2 13 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio2 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	bridge {
	label = "bridge";
	- gpios = <&gpio2 15 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -91,7 +94,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -143,7 +145,7 @@

	phy5: ethernet-phy@5 {
	reg = <5>;
	- phy-mode = "rgmii";
	+ phy-mode = "rgmii-rxid";
	};
	};
	};
	@@ -160,11 +162,11 @@
	status = "okay";

	pcie-bridge {
	- mt76@0,0 {
	+ wifi@0,0 {
	+ compatible = "pci0,0";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 32768>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WHR-300HP2.dts
	===================================================================
	--- sys/gnu/dts/mips/WHR-300HP2.dts
	+++ sys/gnu/dts/mips/WHR-300HP2.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
	model = "Buffalo WHR-300HP2";

	gpio-leds {
	@@ -11,37 +14,37 @@

	power {
	label = "whr-300hp2:red:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "whr-300hp2:green:wifi";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "whr-300hp2:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "whr-300hp2:orange:wifi";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "whr-300hp2:green:internet";
	- gpios = <&gpio2 17 1>;
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "whr-300hp2:green:router";
	- gpios = <&gpio2 18 1>;
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	};

	router2 {
	label = "whr-300hp2:orange:router";
	- gpios = <&gpio2 19 1>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,28 +56,28 @@

	reset {
	label = "reset";
	- gpios = <&gpio2 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio2 13 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio2 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	bridge {
	label = "bridge";
	- gpios = <&gpio2 15 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -91,7 +94,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -125,11 +127,6 @@
	ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};

	@@ -145,4 +142,6 @@

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};
	Index: sys/gnu/dts/mips/WHR-600D.dts
	===================================================================
	--- sys/gnu/dts/mips/WHR-600D.dts
	+++ sys/gnu/dts/mips/WHR-600D.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
	model = "Buffalo WHR-600D";

	gpio-leds {
	@@ -11,37 +14,37 @@

	power {
	label = "whr-600d:red:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "whr-600d:green:wifi";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "whr-600d:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "whr-600d:orange:wifi";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "whr-600d:green:internet";
	- gpios = <&gpio2 17 1>;
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "whr-600d:green:router";
	- gpios = <&gpio2 18 1>;
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	};

	router2 {
	label = "whr-600d:orange:router";
	- gpios = <&gpio2 19 1>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,28 +56,28 @@

	reset {
	label = "reset";
	- gpios = <&gpio2 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio2 13 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio2 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	bridge {
	label = "bridge";
	- gpios = <&gpio2 15 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -91,7 +94,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -145,4 +147,12 @@

	&pcie {
	status = "okay";
	+
	+ pcie-bridge {
	+ wifi@1814,5592 {
	+ compatible = "pci1814,5592";
	+ reg = <0x0000 0 0 0 0>;
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	+ };
	+ };
	};
	Index: sys/gnu/dts/mips/WHR-G300N.dts
	===================================================================
	--- sys/gnu/dts/mips/WHR-G300N.dts
	+++ sys/gnu/dts/mips/WHR-G300N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WHR-G300N", "ralink,rt3052-soc";
	+ compatible = "buffalo,whr-g300n", "ralink,rt3052-soc";
	model = "Buffalo WHR-G300N";

	cfi@1f000000 {
	@@ -13,6 +16,35 @@
	device-width = <2>;
	#address-cells = <1>;
	#size-cells = <1>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3a0000>;
	+ };
	+
	+ partition@3f0000 {
	+ label = "user";
	+ reg = <0x3f0000 0x10000>;
	+ read-only;
	+ };
	};

	gpio-leds {
	@@ -20,17 +52,17 @@

	diag {
	label = "whr-g300n:red:diag";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "whr-g300n:green:router";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	security {
	label = "whr-g300n:amber:security";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -42,26 +74,26 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	router-off {
	label = "router-off";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x102>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_2>;
	};

	router-on {
	label = "router-on";
	- gpios = <&gpio0 8 1>;
	- linux,code = <0x103>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_3>;
	};
	};
	};
	@@ -75,12 +107,14 @@
	};
	};

	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	&esw {
	mediatek,portmap = <0x2f>;
	};

	-/* FIXME: no partitions defined */
	-/*&wmac {
	+&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-*/
	Index: sys/gnu/dts/mips/WIDORA-NEO-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/WIDORA-NEO-16M.dts
	+++ sys/gnu/dts/mips/WIDORA-NEO-16M.dts
	@@ -1,17 +1,25 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "WIDORA-NEO.dtsi"
	+
	+/ {
	+ compatible = "widora,neo-16m", "widora,neo", "mediatek,mt7628an-soc";
	+ model = "Widora-NEO (16M)";
	+};

	&spi0 {
	status = "okay";

	+ pinctrl-names = "default";
	+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
	+
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	+ spi-max-frequency = <40000000>;
	+ m25p,chunked-io = <31>;

	partition@0 {
	label = "u-boot";
	@@ -22,7 +30,6 @@
	partition@30000 {
	label = "u-boot-env";
	reg = <0x30000 0x10000>;
	- read-only;
	};

	factory: partition@40000 {
	@@ -33,7 +40,15 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0x0fb0000>;
	};
	};
	+
	+ spidev@1 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "linux,spidev";
	+ reg = <1>;
	+ spi-max-frequency = <40000000>;
	+ };
	};
	Index: sys/gnu/dts/mips/WIDORA-NEO-32M.dts
	===================================================================
	--- sys/gnu/dts/mips/WIDORA-NEO-32M.dts
	+++ sys/gnu/dts/mips/WIDORA-NEO-32M.dts
	@@ -1,17 +1,25 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "WIDORA-NEO.dtsi"
	+
	+/ {
	+ compatible = "widora,neo-32m", "widora,neo", "mediatek,mt7628an-soc";
	+ model = "Widora-NEO (32M)";
	+};

	&spi0 {
	status = "okay";

	+ pinctrl-names = "default";
	+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
	+
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	+ spi-max-frequency = <40000000>;
	+ m25p,chunked-io = <31>;

	partition@0 {
	label = "u-boot";
	@@ -22,7 +30,6 @@
	partition@30000 {
	label = "u-boot-env";
	reg = <0x30000 0x10000>;
	- read-only;
	};

	factory: partition@40000 {
	@@ -33,7 +40,15 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x3b0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	+
	+ spidev@1 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "linux,spidev";
	+ reg = <1>;
	+ spi-max-frequency = <40000000>;
	+ };
	};
	Index: sys/gnu/dts/mips/WIDORA-NEO.dtsi
	===================================================================
	--- sys/gnu/dts/mips/WIDORA-NEO.dtsi
	+++ sys/gnu/dts/mips/WIDORA-NEO.dtsi
	@@ -1,17 +1,13 @@
	-/dts-v1/;
	-
	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	- model = "MediaTek LinkIt Smart 7688";
	+ compatible = "widora,neo", "mediatek,mt7628an-soc";

	chosen {
	- bootargs = "console=ttyS2,57600";
	- };
	-
	- aliases {
	- serial0 = &uart2;
	+ bootargs = "console=ttyS0,115200";
	};

	memory@0 {
	@@ -19,18 +15,12 @@
	reg = <0x0 0x8000000>;
	};

	- bootstrap {
	- compatible = "mediatek,linkit";
	-
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	wifi {
	- label = "mediatek:orange:wifi";
	- gpios = <&wgpio 0 0>;
	+ label = "widora:orange:wifi";
	+ gpios = <&wgpio 0 GPIO_ACTIVE_HIGH>;
	default-state = "on";
	};
	};
	@@ -43,8 +33,8 @@

	wps {
	label = "reset";
	- gpios = <&gpio1 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -101,57 +91,6 @@
	};
	};

	-&wmac {
	- status = "okay";
	-};
	-
	-&spi0 {
	- status = "okay";
	-
	- pinctrl-names = "default";
	- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	- spi-max-frequency = <40000000>;
	- m25p,chunked-io = <31>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	-
	- spidev@1 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "linux,spidev";
	- reg = <1>;
	- spi-max-frequency = <40000000>;
	- };
	-};
	-
	&i2c {
	status = "okay";
	};
	@@ -174,7 +113,7 @@

	&sdhci {
	status = "okay";
	- mediatek,cd-high;
	+ mediatek,cd-low;
	};

	&wmac {
	Index: sys/gnu/dts/mips/WITI-256M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WITI-256M.dts
	@@ -0,0 +1,13 @@
	+/dts-v1/;
	+
	+#include "WITI.dtsi"
	+
	+/ {
	+ compatible = "mqmaker,witi-256m", "mqmaker,witi", "mediatek,mt7621-soc";
	+ model = "MQmaker WiTi (256MB RAM)";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+};
	Index: sys/gnu/dts/mips/WITI-512M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WITI-512M.dts
	@@ -0,0 +1,13 @@
	+/dts-v1/;
	+
	+#include "WITI.dtsi"
	+
	+/ {
	+ compatible = "mqmaker,witi-512m", "mqmaker,witi", "mediatek,mt7621-soc";
	+ model = "MQmaker WiTi (512MB RAM)";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ };
	+};
	Index: sys/gnu/dts/mips/WITI.dtsi
	===================================================================
	--- sys/gnu/dts/mips/WITI.dtsi
	+++ sys/gnu/dts/mips/WITI.dtsi
	@@ -2,14 +2,11 @@

	#include "mt7621.dtsi"

	-/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "MQmaker WiTi";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x10000000>;
	- };
	+/ {
	+ compatible = "mqmaker,witi", "mediatek,mt7621-soc";

	chosen {
	bootargs = "console=ttyS0,57600";
	@@ -17,12 +14,6 @@

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";

	pcf8563: rtc@51 {
	@@ -41,21 +32,16 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-
	&sdhci {
	status = "okay";
	};

	-&xhci {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -64,8 +50,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -99,7 +85,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	mtd-mac-address = <&factory 0xe000>;
	};
	};
	@@ -109,7 +95,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	mtd-mac-address = <&factory 0xe000>;
	};
	};
	Index: sys/gnu/dts/mips/WIZARD8800.dts
	===================================================================
	--- sys/gnu/dts/mips/WIZARD8800.dts
	+++ sys/gnu/dts/mips/WIZARD8800.dts
	@@ -3,7 +3,7 @@
	#include "rt5350.dtsi"

	/ {
	- compatible = "WIZARD8800", "ralink,rt5350-soc";
	+ compatible = "easyacc,wizard8800", "ralink,rt5350-soc";
	model = "EASYACC WI-STOR WIZARD 8800";
	};

	@@ -23,7 +23,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WIZFI630A.dts
	===================================================================
	--- sys/gnu/dts/mips/WIZFI630A.dts
	+++ sys/gnu/dts/mips/WIZFI630A.dts
	@@ -2,40 +2,38 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "wizfi630a", "ralink,rt5350-soc";
	+ compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
	model = "WIZnet WizFi630A";

	chosen {
	bootargs = "console=ttyS1,115200";
	};

	- gpio-export {
	- compatible = "gpio-export";
	- #size-cells = <0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	run {
	label = "wizfi630a::run";
	- gpios = <&gpio0 1 1>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "wizfi630a::wps";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	uart1 {
	label = "wizfi630a::uart1";
	- gpios = <&gpio0 18 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};

	uart2 {
	label = "wizfi630a::uart2";
	- gpios = <&gpio0 21 1>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -47,26 +45,26 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 17 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	scm1 {
	label = "SCM1";
	- gpios = <&gpio0 19 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	scm2 {
	label = "SCM2";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -83,7 +81,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -116,28 +113,9 @@
	};

	&uart {
	- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	- reg = <0x500 0x100>;
	- resets = <&rstctrl 12>;
	- reset-names = "uart";
	- interrupt-parent = <&intc>;
	- interrupts = <5>;
	- reg-shift = <2>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&uartf_pins>;
	status = "okay";
	-};
	-
	-&uartlite {
	- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	- reg = <0xc00 0x100>;
	- resets = <&rstctrl 19>;
	- reset-names = "uartl";
	- interrupt-parent = <&intc>;
	- interrupts = <12>;
	- reg-shift = <2>;
	pinctrl-names = "default";
	- pinctrl-0 = <&uartlite_pins>;
	+ pinctrl-0 = <&uartf_pins>;
	};

	&pinctrl {
	@@ -147,20 +125,6 @@
	ralink,function = "gpio";
	};
	};
	-
	- uartf_gpio_pins: uartf_gpio {
	- uartf_gpio {
	- ralink,group = "uartf";
	- ralink,function = "uartf";
	- };
	- };
	-
	- uartlite_pins: uartlite {
	- uart {
	- ralink,group = "uartlite";
	- ralink,function = "uartlite";
	- };
	- };
	};

	&ethernet {
	Index: sys/gnu/dts/mips/WL-330N.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-330N.dts
	+++ sys/gnu/dts/mips/WL-330N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WL-330N", "ralink,rt3050-soc";
	+ compatible = "asus,wl-330n", "ralink,rt3050-soc";
	model = "Asus WL-330N";

	gpio-leds {
	@@ -11,12 +14,12 @@

	link {
	label = "wl-330n:blue:link";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wl-330n:blue:power";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -48,7 +51,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WL-330N3G.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-330N3G.dts
	+++ sys/gnu/dts/mips/WL-330N3G.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WL-330N3G", "ralink,rt3050-soc";
	+ compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
	model = "Asus WL-330N3G";

	gpio-leds {
	@@ -11,17 +14,17 @@

	3g {
	label = "wl-330n3g:blue:3g";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	3g2 {
	label = "wl-330n3g:red:3g";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wl-330n3g:blue:power";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WL-341V3.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-341V3.dts
	+++ sys/gnu/dts/mips/WL-341V3.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WL-341V3", "ralink,rt3052-soc";
	+ compatible = "sitecom,wl-341-v3", "ralink,rt3052-soc";
	model = "Sitecom WL-341 v3";

	cfi@1f000000 {
	@@ -43,37 +46,37 @@

	first {
	label = "wl-341v3:amber:first";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	first2 {
	label = "wl-341v3:blue:first";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	third {
	label = "wl-341v3:amber:third";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	third2 {
	label = "wl-341v3:blue:third";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	fourth {
	label = "wl-341v3:blue:fourth";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	fifth {
	label = "wl-341v3:amber:fifth";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	fifth2 {
	label = "wl-341v3:blue:fifth";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -85,14 +88,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 5 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WL-351.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-351.dts
	+++ sys/gnu/dts/mips/WL-351.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WL-351", "ralink,rt3052-soc";
	+ compatible = "sitecom,wl-351", "ralink,rt3052-soc";
	model = "Sitecom WL-351 v1 002";

	cfi@1f000000 {
	@@ -43,17 +46,17 @@

	power {
	label = "wl-351:amber:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	unpopulated {
	label = "wl-351:amber:unpopulated";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	unpopulated2 {
	label = "wl-351:blue:unpopulated";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -65,28 +68,28 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	rtl8366rb {
	- compatible = "rtl8366rb";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ compatible = "realtek,rtl8366rb";
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};
	};

	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
	ralink,function = "gpio";
	};
	};
	@@ -94,9 +97,12 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii_pins>;
	};

	&esw {
	+ ralink,rgmii = <1>;
	mediatek,portmap = <0x3f>;
	ralink,fct2 = <0x0002500c>;
	/*
	Index: sys/gnu/dts/mips/WL-WN575A3.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-WN575A3.dts
	+++ sys/gnu/dts/mips/WL-WN575A3.dts
	@@ -1,50 +1,83 @@
	/dts-v1/;
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>

	-#include "mt7621.dtsi"
	+#include "mt7628an.dtsi"

	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Linksys RE6500";
	+ compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
	+ model = "Wavlink WL-WN575A3";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x4000000>;
	};

	- chosen {
	- bootargs = "console=ttyS0,57600";
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	};

	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "re6500:orange:wifi";
	- gpios = <&gpio0 0 0>;
	+ wifi-high {
	+ label = "wl-wn575a3:green:wifi-high";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};

	- power {
	- label = "re6500:white:power";
	- gpios = <&gpio0 9 0>;
	+ wifi-med {
	+ label = "wl-wn575a3:green:wifi-med";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	- };

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	+ wifi-low {
	+ label = "wl-wn575a3:green:wifi-low";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };

	wps {
	- label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ label = "wl-wn575a3:green:wps";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	};
	+ };
	+};

	- reset {
	- label = "reset";
	- gpios = <&gpio0 11 0>;
	- linux,code = <0x198>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -57,8 +90,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -85,37 +118,12 @@
	};
	};

	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&pcie {
	+&wmac {
	status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	+ ralink,mtd-eeprom = <&factory 0x4>;
	};

	&ethernet {
	mtd-mac-address = <&factory 0x2e>;
	+ mediatek,portmap = "llllw";
	};
	Index: sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	===================================================================
	--- sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	+++ sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	@@ -2,10 +2,13 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
	+ compatible = "buffalo,wli-tx4-ag300n", "ralink,rt2880-soc";
	model = "Buffalo WLI-TX4-AG300N";

	cfi@1f000000 {
	@@ -35,7 +38,7 @@
	};

	partition@50000 {
	- label = "linux";
	+ label = "firmware";
	reg = <0x50000 0x3b0000>;
	};
	};
	@@ -48,20 +51,20 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	bandwidth {
	label = "bandwidth";
	- gpios = <&gpio0 8 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -70,17 +73,17 @@

	diag {
	label = "wli-tx4-ag300n:red:diag";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wli-tx4-ag300n:blue:power";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	security {
	label = "wli-tx4-ag300n:blue:security";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -94,7 +97,16 @@
	mtd-mac-address = <&factory 0x4>;

	port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	+ mediatek,fixed-link = <100 1 1 1>;
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ phy-mode = "mii";
	+ reg = <0>;
	+ };
	};
	};

	Index: sys/gnu/dts/mips/WLR-6000.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WLR-6000.dts
	@@ -0,0 +1,187 @@
	+/dts-v1/;
	+
	+#include "rt3883.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
	+ model = "Sitecom WLR-6000";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "wlr-6000:red:power";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ ops {
	+ label = "wlr-6000:white:ops";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usb {
	+ gpio-export,name = "usb";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x8004>;
	+ mtd-mac-address-increment = <1>;
	+
	+ port@0 {
	+ phy-handle = <&phy0>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ reg = <0>;
	+ phy-mode = "rgmii";
	+
	+ qca,ar8327-initvals = <
	+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
	+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
	+ 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
	+ 0x50 0xc437c437 /* LED Control Register 0 */
	+ 0x54 0xc337c337 /* LED Control Register 1 */
	+ 0x58 0x00000000 /* LED Control Register 2 */
	+ 0x5c 0x03ffff00 /* LED Control Register 3 */
	+ 0x7c 0x0000007e /* PORT0_STATUS */
	+ 0x94 0x0000007e /* PORT6 STATUS */
	+ >;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <8600000>;
	+ m25p,fast-read;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x713000>;
	+ };
	+
	+ partition@763000 {
	+ label = "manufacture";
	+ reg = <0x763000 0x7D000>;
	+ read-only;
	+ };
	+
	+ partition@7E0000 {
	+ label = "backup";
	+ reg = <0x7E0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7F0000 {
	+ label = "storage";
	+ reg = <0x7F0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pci_pins>;
	+
	+ pci_pins: pci {
	+ pci {
	+ ralink,group = "pci";
	+ ralink,function = "pci-fnc";
	+ };
	+ };
	+
	+ host-bridge {
	+ pci-bridge@1 {
	+ status = "okay";
	+
	+ wifi@1814,3091 {
	+ compatible = "pci1814,3091";
	+ reg = <0x10000 0 0 0 0>;
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	+ };
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,2ghz = <0>;
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/WMDR-143N.dts
	===================================================================
	--- sys/gnu/dts/mips/WMDR-143N.dts
	+++ sys/gnu/dts/mips/WMDR-143N.dts
	@@ -1,10 +1,10 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "rt3883.dtsi"

	/ {
	- compatible = "NCS601W", "ralink,rt5350-soc";
	- model = "Wansview NCS601W";
	+ compatible = "loewe,wmdr-143n", "ralink,rt3883-soc";
	+ model = "Loewe WMDR-143N";
	};

	&spi0 {
	@@ -15,8 +15,7 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	+ spi-max-frequency = <25000000>;

	partition@0 {
	label = "u-boot";
	@@ -26,7 +25,7 @@

	partition@30000 {
	label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	+ reg = <0x30000 0x00010000>;
	read-only;
	};

	@@ -43,31 +42,23 @@
	};
	};

	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	+ port@0 {
	+ phy-handle = <&phy0>;
	+ phy-mode = "mii";
	+ };
	+ mdio-bus {
	+ status = "okay";

	-&esw {
	- mediatek,portmap = <0x2f>;
	+ phy0: ethernet-phy@0 {
	+ reg = <0>;
	+ phy-mode = "mii";
	+ };
	+ };
	};

	&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	status = "okay";
	+ ralink,mtd-eeprom = <&factory 0>;
	+ mtd-mac-address = <&factory 0x4>;
	};
	Index: sys/gnu/dts/mips/WMR-300.dts
	===================================================================
	--- sys/gnu/dts/mips/WMR-300.dts
	+++ sys/gnu/dts/mips/WMR-300.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
	model = "Buffalo WMR-300";
	@@ -11,17 +14,17 @@

	aoss1 {
	label = "wmr-300:red:aoss";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	aoss2 {
	label = "wmr-300:green:aoss";
	- gpios = <&gpio2 2 1>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wmr-300:green:status";
	- gpios = <&gpio2 4 1>;
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -57,7 +60,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WN-GX300GR.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WN-GX300GR.dts
	@@ -0,0 +1,156 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "iodata,wn-gx300gr", "mediatek,mt7621-soc";
	+ model = "I-O DATA WN-GX300GR";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "wn-gx300gr:green:power";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "wn-gx300gr:green:wps";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ auto {
	+ label = "auto";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	+ };
	+
	+ custom {
	+ label = "custom";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "Bootloader";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "Config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ Factory: partition@40000 {
	+ label = "Factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "iNIC_rf";
	+ reg = <0x50000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@60000 {
	+ label = "firmware";
	+ reg = <0x60000 0x770000>;
	+ };
	+
	+ partition@7d0000 {
	+ label = "Key";
	+ reg = <0x7d0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7e0000 {
	+ label = "backup";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7f0000 {
	+ label = "storage";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&Factory 0x4>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart2", "uart3", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&Factory 0x0>;
	+ };
	+ };
	+};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/WN3000RPV3.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WN3000RPV3.dts
	@@ -0,0 +1,143 @@
	+/* This file is released into the public domain */
	+
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
	+ model = "Netgear WN3000RPv3";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power_g {
	+ label = "wn3000rpv3:green:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ default-state = "on";
	+ };
	+
	+ power_r {
	+ label = "wn3000rpv3:red:power";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ client_g {
	+ label = "wn3000rpv3:green:client";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ client_r {
	+ label = "wn3000rpv3:red:client";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router_g {
	+ label = "wn3000rpv3:green:router";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router_r {
	+ label = "wn3000rpv3:red:router";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "wn3000rpv3:green:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ l_arrow {
	+ label = "wn3000rpv3:blue:leftarrow";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ r_arrow {
	+ label = "wn3000rpv3:blue:rightarrow";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0x7b0000>;
	+ };
	+
	+ art: partition@7f0000 {
	+ label = "art";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&art 0x0>;
	+};
	+
	+&wmac {
	+ mtd-mac-address = <&art 0x6>;
	+ ralink,mtd-eeprom = <&art 0x1000>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "spi refclk";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/WNCE2001.dts
	===================================================================
	--- sys/gnu/dts/mips/WNCE2001.dts
	+++ sys/gnu/dts/mips/WNCE2001.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WNCE2001", "ralink,rt3052-soc";
	+ compatible = "netgear,wnce2001", "ralink,rt3052-soc";
	model = "Netgear WNCE2001";

	chosen {
	@@ -15,22 +18,22 @@

	power-green {
	label = "wnce2001:green:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power-red {
	label = "wnce2001:red:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan-green {
	label = "wnce2001:green:wlan";
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};

	wlan-red {
	label = "wnce2001:red:wlan";
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -42,26 +45,26 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	rt {
	label = "rt";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -74,7 +77,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WNDR3700V5.dts
	===================================================================
	--- sys/gnu/dts/mips/WNDR3700V5.dts
	+++ sys/gnu/dts/mips/WNDR3700V5.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
	+ compatible = "netgear,wndr3700-v5", "mediatek,mt7621-soc";
	model = "Netgear WNDR3700v5";

	memory@0 {
	@@ -20,12 +23,12 @@

	wps {
	label = "wndr3700v5:green:wps";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wndr3700v5:green:power";
	- gpios = <&gpio0 18 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,20 +40,20 @@

	wps {
	label = "wndr3700v5:wps";
	- gpios = <&gpio0 7 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	wifi {
	label = "wndr3700v5:wifi";
	- gpios = <&gpio0 8 0>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	};

	reset {
	label = "wndr3700v5:reset";
	- gpios = <&gpio0 14 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -61,7 +64,7 @@
	usbpower {
	gpio-export,name = "usbpower";
	gpio-export,output = <1>;
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -69,17 +72,18 @@
	&spi0 {
	status = "okay";

	- m25p80@0 {
	+ mx25l12805d@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "mx25l12805d";
	+ compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	reg = <0x0 0x30000>;
	+ read-only;
	};

	partition@30000 {
	@@ -96,7 +100,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0xee0000>;
	};
	};
	};
	@@ -108,17 +112,16 @@
	mt76@0,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0004>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	- pcie2 {
	- mt76@2,0 {
	- reg = <0x1000 0 0 0 0>;
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8004>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WR1200JS.dts
	===================================================================
	--- sys/gnu/dts/mips/WR1200JS.dts
	+++ sys/gnu/dts/mips/WR1200JS.dts
	@@ -2,28 +2,38 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG2626";
	+ compatible = "youhua,wr1200js", "mediatek,mt7621-soc";
	+ model = "YouHua WR1200JS";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ reg = <0x0 0x8000000>;
	};

	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus: palmbus@1E000000 {
	- i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	- status = "okay";
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ internet {
	+ label = "wr1200js:blue:internet";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "wr1200js:blue:wps";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "wr1200js:blue:usb";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -35,25 +45,24 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	- };

	- gpio-leds {
	- compatible = "gpio-leds";
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };

	- status {
	- label = "zbt-wg2626:green:status";
	- gpios = <&gpio0 24 1>;
	+ wifi {
	+ label = "wifi";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};

	-&sdhci {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -62,8 +71,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -97,8 +106,7 @@
	mt76@0,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	};
	};

	@@ -106,8 +114,13 @@
	mt76@1,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+
	+ led {
	+ led-sources = <2>;
	+ led-active-low;
	+ };
	};
	};
	};
	@@ -119,7 +132,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "i2c", "uart2", "uart3", "wdt";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/WR512-3GN-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/WR512-3GN-4M.dts
	+++ sys/gnu/dts/mips/WR512-3GN-4M.dts
	@@ -1,10 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "WR512-3GN.dtsi"

	/ {
	- compatible = "WR512-3GN", "ralink,rt3052-soc";
	- model = "WR512-3GN-like router";
	+ compatible = "unbranded,wr512-3gn-4m", "unbranded,wr512-3gn", "ralink,rt3052-soc";
	+ model = "WR512-3GN (4M)";

	cfi@1f000000 {
	compatible = "cfi-flash";
	@@ -37,73 +37,4 @@
	reg = <0x50000 0x3c8000>;
	};
	};
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- 3g {
	- label = "wr512-3gn:green:3g";
	- gpios = <&gpio0 9 1>;
	- };
	-
	- gateway {
	- label = "wr512-3gn:green:gateway";
	- gpios = <&gpio0 11 1>;
	- };
	-
	- ap {
	- label = "wr512-3gn:green:ap";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- wps {
	- label = "wr512-3gn:green:wps";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- station {
	- label = "wr512-3gn:green:station";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x32>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&otg {
	- status = "okay";
	};
	Index: sys/gnu/dts/mips/WR512-3GN-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/WR512-3GN-8M.dts
	+++ sys/gnu/dts/mips/WR512-3GN-8M.dts
	@@ -1,10 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "WR512-3GN.dtsi"

	/ {
	- compatible = "WR512-3GN", "ralink,rt3052-soc";
	- model = "WR512-3GN-like router";
	+ compatible = "unbranded,wr512-3gn-8m", "unbranded,wr512-3gn", "ralink,rt3052-soc";
	+ model = "WR512-3GN (8M)";

	cfi@1f000000 {
	compatible = "cfi-flash";
	@@ -37,73 +37,4 @@
	reg = <0x50000 0x7b0000>;
	};
	};
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- 3g {
	- label = "wr512-3gn:green:3g";
	- gpios = <&gpio0 9 1>;
	- };
	-
	- gateway {
	- label = "wr512-3gn:green:gateway";
	- gpios = <&gpio0 11 1>;
	- };
	-
	- ap {
	- label = "wr512-3gn:green:ap";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- wps {
	- label = "wr512-3gn:green:wps";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- station {
	- label = "wr512-3gn:green:station";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x32>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&otg {
	- status = "okay";
	};
	Index: sys/gnu/dts/mips/WR512-3GN.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WR512-3GN.dtsi
	@@ -0,0 +1,77 @@
	+#include "rt3050.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "unbranded,wr512-3gn", "ralink,rt3052-soc";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ 3g {
	+ label = "wr512-3gn:green:3g";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ gateway {
	+ label = "wr512-3gn:green:gateway";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ ap {
	+ label = "wr512-3gn:green:ap";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "wr512-3gn:green:wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ station {
	+ label = "wr512-3gn:green:station";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset_wps {
	+ label = "reset_wps";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ mode {
	+ label = "mode";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/WR6202.dts
	===================================================================
	--- sys/gnu/dts/mips/WR6202.dts
	+++ sys/gnu/dts/mips/WR6202.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WR6202", "ralink,rt3052-soc";
	+ compatible = "accton,wr6202", "ralink,rt3052-soc";
	model = "AWB WR6202";

	chosen {
	@@ -15,12 +18,12 @@

	wps {
	label = "wr6202:blue:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "wr6202:blue:3g";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +35,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -82,7 +85,7 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <0>;
	- gpios = <&gpio0 11 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WRC-1167GHBK2-S.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WRC-1167GHBK2-S.dts
	@@ -0,0 +1,144 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "elecom,wrc-1167ghbk2-s", "mediatek,mt7621-soc";
	+ model = "ELECOM WRC-1167GHBK2-S";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wlan2g {
	+ label = "wrc-1167ghbk2-s:white:wlan2g";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan5g {
	+ label = "wrc-1167ghbk2-s:white:wlan5g";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power_green {
	+ label = "wrc-1167ghbk2-s:green:power";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power_blue {
	+ label = "wrc-1167ghbk2-s:blue:power";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wps {
	+ label = "wrc-1167ghbk2-s:red:wps";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power_red {
	+ label = "wrc-1167ghbk2-s:red:power";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf20000>;
	+ };
	+
	+ partition@f70000 {
	+ label = "user_data";
	+ reg = <0xf70000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@ff0000 {
	+ label = "NVRAM";
	+ reg = <0xff0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uart3", "jtag", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+ // WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
	+ // but it's not supported in OpenWrt.
	+};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/WRH-300CR.dts
	===================================================================
	--- sys/gnu/dts/mips/WRH-300CR.dts
	+++ sys/gnu/dts/mips/WRH-300CR.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc";
	model = "ELECOM WRH-300CR";
	@@ -11,17 +14,17 @@

	wps {
	label = "wrh-300cr:green:wps";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	ethernet {
	label = "wrh-300cr:green:ethernet";
	- gpios = <&gpio2 3 1>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "wrh-300cr:green:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -65,7 +68,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l12805d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WRTNODE.dts
	===================================================================
	--- sys/gnu/dts/mips/WRTNODE.dts
	+++ sys/gnu/dts/mips/WRTNODE.dts
	@@ -2,8 +2,10 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "wrtnode", "ralink,mt7620n-soc";
	+ compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc";
	model = "WRTNODE";

	gpio-leds {
	@@ -11,7 +13,7 @@

	indicator {
	label = "wrtnode:blue:indicator";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -36,7 +38,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WRTNODE2.dtsi
	===================================================================
	--- sys/gnu/dts/mips/WRTNODE2.dtsi
	+++ sys/gnu/dts/mips/WRTNODE2.dtsi
	@@ -1,6 +1,11 @@
	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	+ compatible = "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
	+
	chosen {
	bootargs = "console=ttyS0,115200";
	};
	@@ -13,8 +18,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 5 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -73,7 +78,7 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	- ralink,port-map = "llllw";
	+ mediatek,portmap = "llllw";
	};

	&sdhci {
	Index: sys/gnu/dts/mips/WRTNODE2P.dts
	===================================================================
	--- sys/gnu/dts/mips/WRTNODE2P.dts
	+++ sys/gnu/dts/mips/WRTNODE2P.dts
	@@ -3,7 +3,7 @@
	#include "WRTNODE2.dtsi"

	/ {
	- compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc";
	+ compatible = "wrtnode,wrtnode2p", "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
	model = "WRTnode2P";

	gpio-leds {
	@@ -11,7 +11,7 @@

	indicator {
	label = "wrtnode:blue:indicator";
	- gpios = <&gpio1 9 1>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WRTNODE2R.dts
	===================================================================
	--- sys/gnu/dts/mips/WRTNODE2R.dts
	+++ sys/gnu/dts/mips/WRTNODE2R.dts
	@@ -3,7 +3,7 @@
	#include "WRTNODE2.dtsi"

	/ {
	- compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc";
	+ compatible = "wrtnode,wrtnode2r", "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
	model = "WRTnode2R";

	gpio-leds {
	@@ -11,7 +11,7 @@

	indicator {
	label = "wrtnode:blue:indicator";
	- gpios = <&gpio1 12 1>;
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WSR-1166.dts
	===================================================================
	--- sys/gnu/dts/mips/WSR-1166.dts
	+++ sys/gnu/dts/mips/WSR-1166.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
	+ compatible = "buffalo,wsr-1166dhp", "mediatek,mt7621-soc";
	model = "Buffalo WSR-1166DHP";

	memory@0 {
	@@ -20,42 +23,42 @@

	internet_g {
	label = "wsr-1166:green:internet";
	- gpios = <&gpio1 9 1>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};

	router_g {
	label = "wsr-1166:green:router";
	- gpios = <&gpio1 10 1>;
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	};

	router_o {
	label = "wsr-1166:orange:router";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};

	internet_o {
	label = "wsr-1166:orange:internet";
	- gpios = <&gpio1 12 1>;
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};

	wifi_o {
	label = "wsr-1166:orange:wifi";
	- gpios = <&gpio1 13 1>;
	+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wsr-1166:green:power";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	diag {
	label = "wsr-1166:orange:diag";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	wifi_g {
	label = "wsr-1166:green:wifi";
	- gpios = <&gpio1 16 1>;
	+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -67,47 +70,47 @@

	power {
	label = "power";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x74>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 3 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	auto {
	label = "mode";
	- gpios = <&gpio0 7 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio0 10 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	router {
	label = "router";
	- gpios = <&gpio0 12 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};

	gpio_poweroff {
	compatible = "gpio-poweroff";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -119,8 +122,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -169,7 +172,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -178,7 +181,10 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/WSR-600.dts
	===================================================================
	--- sys/gnu/dts/mips/WSR-600.dts
	+++ sys/gnu/dts/mips/WSR-600.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
	+ compatible = "buffalo,wsr-600dhp", "mediatek,mt7621-soc";
	model = "Buffalo WSR-600DHP";

	memory@0 {
	@@ -20,42 +23,42 @@

	power {
	label = "wsr-600:green:power";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wifi_o {
	label = "wsr-600:orange:wifi";
	- gpios = <&gpio1 9 1>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};

	diag {
	label = "wsr-600:orange:diag";
	- gpios = <&gpio1 10 1>;
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	};

	wifi_g {
	label = "wsr-600:green:wifi";
	- gpios = <&gpio1 12 1>;
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};

	router_o {
	label = "wsr-600:orange:router";
	- gpios = <&gpio1 13 1>;
	+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
	};

	router_g {
	label = "wsr-600:green:router";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	internet_o {
	label = "wsr-600:orange:internet";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	internet_g {
	label = "wsr-600:green:internet";
	- gpios = <&gpio1 16 1>;
	+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -67,47 +70,47 @@

	power {
	label = "power";
	- gpios = <&gpio0 8 1>;
	- linux,code = <0x74>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	auto {
	label = "mode";
	- gpios = <&gpio0 7 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio0 6 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	router {
	label = "router";
	- gpios = <&gpio0 10 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};

	gpio_poweroff {
	compatible = "gpio-poweroff";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -119,8 +122,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -155,3 +158,27 @@
	};
	};
	};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ rt5592@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ };
	+ };
	+};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/WT1520-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/WT1520-4M.dts
	+++ sys/gnu/dts/mips/WT1520-4M.dts
	@@ -2,6 +2,11 @@

	#include "WT1520.dtsi"

	+/ {
	+ compatible = "nexx,wt1520-4m", "nexx,wt1520", "ralink,rt5350-soc";
	+ model = "Nexx WT1520 (4M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WT1520-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/WT1520-8M.dts
	+++ sys/gnu/dts/mips/WT1520-8M.dts
	@@ -2,6 +2,11 @@

	#include "WT1520.dtsi"

	+/ {
	+ compatible = "nexx,wt1520-8m", "nexx,wt1520", "ralink,rt5350-soc";
	+ model = "Nexx WT1520 (8M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WT1520.dtsi
	===================================================================
	--- sys/gnu/dts/mips/WT1520.dtsi
	+++ sys/gnu/dts/mips/WT1520.dtsi
	@@ -1,29 +1,34 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "NEXXWT1520", "ralink,rt5350-soc";
	- model = "Nexx WT1520";
	+ compatible = "nexx,wt1520", "ralink,rt5350-soc";

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x2000000>;
	};

	- chosen {
	- bootargs = "console=ttyS1,57600";
	- };
	-};
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;

	-&uart {
	- pinctrl-names = "default";
	- pinctrl-0 = <&uartf_pins>;
	- status = "okay";
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	};

	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "jtag";
	+ ralink,group = "jtag", "uartf";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/WT3020-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/WT3020-4M.dts
	+++ sys/gnu/dts/mips/WT3020-4M.dts
	@@ -1,40 +1,10 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "WT3020.dtsi"

	/ {
	- compatible = "wt3020", "ralink,mt7620n-soc";
	- model = "Nexx WT3020";
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "wt3020:blue:power";
	- gpios = <&gpio3 0 0>;
	- };
	- };
	-};
	-
	-&gpio2 {
	- status = "okay";
	-};
	-
	-&gpio3 {
	- status = "okay";
	+ compatible = "nexx,wt3020-4m", "nexx,wt3020", "ralink,mt7620n-soc";
	+ model = "Nexx WT3020 (4M)";
	};

	&spi0 {
	@@ -45,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -72,29 +41,3 @@
	};
	};
	};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	Index: sys/gnu/dts/mips/WT3020-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/WT3020-8M.dts
	+++ sys/gnu/dts/mips/WT3020-8M.dts
	@@ -1,39 +1,17 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "WT3020.dtsi"

	/ {
	- compatible = "wt3020", "ralink,mt7620n-soc";
	- model = "Nexx WT3020";
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "wt3020:blue:power";
	- gpios = <&gpio3 0 0>;
	- };
	- };
	+ compatible = "nexx,wt3020-8m", "nexx,wt3020", "ralink,mt7620n-soc";
	+ model = "Nexx WT3020 (8M)";
	};

	-&gpio2 {
	+&ehci {
	status = "okay";
	};

	-&gpio3 {
	+&ohci {
	status = "okay";
	};

	@@ -45,7 +23,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -72,29 +49,3 @@
	};
	};
	};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	Index: sys/gnu/dts/mips/WT3020.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WT3020.dtsi
	@@ -0,0 +1,56 @@
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "nexx,wt3020", "ralink,mt7620n-soc";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "wt3020:blue:power";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/WZR-AGL300NH.dts
	===================================================================
	--- sys/gnu/dts/mips/WZR-AGL300NH.dts
	+++ sys/gnu/dts/mips/WZR-AGL300NH.dts
	@@ -2,17 +2,16 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
	+ compatible = "buffalo,wzr-agl300nh", "ralink,rt2880-soc";
	model = "Buffalo WZR-AGL300NH";

	pci@440000 {
	- compatible = "ralink,rt288x-pci";
	- reg = <0x00440000 0x20000>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	status = "ok";
	};

	@@ -50,8 +49,8 @@

	rtl8366s {
	compatible = "realtek,rtl8366s";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

	gpio-keys-polled {
	@@ -62,20 +61,20 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	router {
	label = "router_switch";
	- gpios = <&gpio0 7 0>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -84,22 +83,22 @@

	router {
	label = "wzr-agl300nh:green:router";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	diag {
	label = "wzr-agl300nh:red:diag";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	security_g {
	label = "wzr-agl300nh:orange:security_g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	security_n {
	label = "wzr-agl300nh:orange:security_n";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/X5.dts
	===================================================================
	--- sys/gnu/dts/mips/X5.dts
	+++ sys/gnu/dts/mips/X5.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "X5", "ralink,rt5350-soc";
	+ compatible = "poray,x5", "ralink,rt5350-soc";
	model = "Poray X5";

	gpio-leds {
	@@ -11,22 +14,22 @@

	power {
	label = "x5:green:power";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	20 {
	label = "x5:green:20";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	50 {
	label = "x5:green:50";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	80 {
	label = "x5:green:80";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -38,21 +41,21 @@

	bat {
	label = "bat";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};

	@@ -63,7 +66,7 @@
	usb-mode {
	gpio-export,name = "usb-mode";
	gpio-export,output = <0>;
	- gpios = <&gpio0 18 0>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -76,7 +79,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/X8.dts
	===================================================================
	--- sys/gnu/dts/mips/X8.dts
	+++ sys/gnu/dts/mips/X8.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "X8", "ralink,rt5350-soc";
	+ compatible = "poray,x8", "ralink,rt5350-soc";
	model = "Poray X8";

	gpio-leds {
	@@ -11,7 +14,7 @@

	power {
	label = "x8:green:power";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,7 +40,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/XDXRN502J.dts
	===================================================================
	--- sys/gnu/dts/mips/XDXRN502J.dts
	+++ sys/gnu/dts/mips/XDXRN502J.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "XDXRN502J", "ralink,rt3052-soc";
	+ compatible = "unbranded,xdxrn502j", "ralink,rt3052-soc";
	model = "XDX RN502J";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	wifi {
	label = "xdxrn502j:green:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "xdxrn502j:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/Y1.dts
	===================================================================
	--- sys/gnu/dts/mips/Y1.dts
	+++ sys/gnu/dts/mips/Y1.dts
	@@ -3,7 +3,7 @@
	#include "Y1.dtsi"

	/ {
	- compatible = "lenovo,Y1", "ralink,mt7620a-soc";
	+ compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
	model = "Lenovo Y1";

	gpio-leds {
	@@ -11,32 +11,32 @@

	power1 {
	label = "y1:blue:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan1 {
	label = "y1:blue:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan2 {
	label = "y1:blue:wifi5g";
	- gpios = <&gpio2 10 1>;
	+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "y1:blue:usb";
	- gpios = <&gpio2 12 1>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "y1:blue:lan";
	- gpios = <&gpio2 15 1>;
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "y1:blue:internet";
	- gpios = <&gpio2 11 1>;
	+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/Y1.dtsi
	===================================================================
	--- sys/gnu/dts/mips/Y1.dtsi
	+++ sys/gnu/dts/mips/Y1.dtsi
	@@ -1,6 +1,11 @@
	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	+ compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
	+
	chosen {
	bootargs = "console=ttyS0,115200";
	};
	@@ -13,8 +18,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -39,7 +44,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -83,13 +87,15 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};

	&pinctrl {
	@@ -98,10 +104,5 @@
	ralink,group = "uartf", "wled", "nd_sd";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};
	Index: sys/gnu/dts/mips/Y1S.dts
	===================================================================
	--- sys/gnu/dts/mips/Y1S.dts
	+++ sys/gnu/dts/mips/Y1S.dts
	@@ -3,7 +3,7 @@
	#include "Y1.dtsi"

	/ {
	- compatible = "lenovo,Y1S", "ralink,mt7620a-soc";
	+ compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
	model = "Lenovo Y1S";

	gpio_export {
	@@ -13,17 +13,17 @@
	usb0 {
	gpio-export,name = "usb0";
	gpio-export,output = <1>; // GPIOF_OUT_INIT_HIGH
	- gpios = <&gpio2 14 0>; // GPIO2:40+14=GPIO 54
	+ gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; // GPIO2:40+14=GPIO 54
	};
	usb1 {
	gpio-export,name = "usb1";
	gpio-export,output = <1>;
	- gpios = <&gpio2 15 0>;
	+ gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
	};
	usb2 {
	gpio-export,name = "usb2";
	gpio-export,output = <1>;
	- gpios = <&gpio2 16 0>;
	+ gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -32,37 +32,37 @@

	power1 {
	label = "y1s:yellow:power";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "y1s:blue:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan1 {
	label = "y1s:yellow:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan2 {
	label = "y1s:blue:wifi";
	- gpios = <&gpio2 10 1>;
	+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
	};

	usb1 {
	label = "y1s:yellow:usb";
	- gpios = <&gpio2 13 1>;
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	};

	usb2 {
	label = "y1s:blue:usb";
	- gpios = <&gpio2 12 1>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "y1s:blue:internet";
	- gpios = <&gpio2 11 1>;
	+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/YOUKU-YK1.dts
	===================================================================
	--- sys/gnu/dts/mips/YOUKU-YK1.dts
	+++ sys/gnu/dts/mips/YOUKU-YK1.dts
	@@ -2,27 +2,30 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "YOUKU-YK1", "ralink,mt7620a-soc";
	+ compatible = "youku,yk1", "ralink,mt7620a-soc";
	model = "YOUKU YK1";

	gpio-leds {
	compatible = "gpio-leds";
	wan {
	label = "youku-yk1:blue:wan";
	- gpios = <&gpio2 4 1>;
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};
	air {
	label = "youku-yk1:blue:air";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	usb {
	label = "youku-yk1:blue:usb";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
	power {
	label = "youku-yk1:blue:power";
	- gpios = <&gpio1 5 1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,8 +36,8 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q256";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -94,7 +96,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	default {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	+ ralink,group = "i2c", "rgmii1", "ephy", "wled";
	ralink,function = "gpio";
	};
	};
	@@ -102,7 +104,6 @@

	&ethernet {
	pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "llllw";
	};
	Index: sys/gnu/dts/mips/ZBT-APE522II.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-APE522II.dts
	+++ sys/gnu/dts/mips/ZBT-APE522II.dts
	@@ -2,9 +2,12 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
	- model = "Xiaomi MiWiFi Mini";
	+ compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
	+ model = "ZBT-APE522II";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -13,19 +16,29 @@
	gpio-leds {
	compatible = "gpio-leds";

	- blue {
	- label = "miwifi-mini:blue:status";
	- gpios = <&gpio1 0 1>;
	+ sys1 {
	+ label = "zbt-ape522ii:green:sys1";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ sys2 {
	+ label = "zbt-ape522ii:green:sys2";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	- yellow {
	- label = "miwifi-mini:yellow:status";
	- gpios = <&gpio1 2 1>;
	+ sys3 {
	+ label = "zbt-ape522ii:green:sys3";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	- red {
	- label = "miwifi-mini:red:status";
	- gpios = <&gpio1 5 1>;
	+ sys4 {
	+ label = "zbt-ape522ii:green:sys4";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan2g4 {
	+ label = "zbt-ape522ii:green:wlan2g4";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +50,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio1 6 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -55,6 +68,10 @@
	status = "okay";
	};

	+&gpio3 {
	+ status = "okay";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -63,7 +80,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -87,42 +103,20 @@
	label = "firmware";
	reg = <0x50000 0xf80000>;
	};
	-
	- partition@fd0000 {
	- label = "crash";
	- reg = <0xfd0000 0x10000>;
	- };
	-
	- partition@fe0000 {
	- label = "reserved";
	- reg = <0xfe0000 0x10000>;
	- read-only;
	- };
	-
	- partition@ff0000 {
	- label = "Bdata";
	- reg = <0xff0000 0x10000>;
	- };
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};

	&pcie {
	@@ -133,7 +127,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -141,13 +135,8 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "rgmii1";
	+ ralink,group = "wled", "i2c", "uartf", "wdt";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};
	Index: sys/gnu/dts/mips/ZBT-CPE102.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-CPE102.dts
	+++ sys/gnu/dts/mips/ZBT-CPE102.dts
	@@ -2,9 +2,12 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
	- model = "Zbtlink ZBT-WA05";
	+ compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
	+ model = "Zbtlink ZBT-CPE102";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -13,19 +16,19 @@
	gpio-leds {
	compatible = "gpio-leds";

	- power {
	- label = "zbt-wa05:blue:power";
	- gpios = <&gpio1 14 1>;
	+ 4g-0 {
	+ label = "zbt-cpe102:green:4g-0";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	- usb {
	- label = "zbt-wa05:blue:usb";
	- gpios = <&gpio1 15 0>;
	+ 4g-1 {
	+ label = "zbt-cpe102:green:4g-1";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	};

	- air {
	- label = "zbt-wa05:blue:air";
	- gpios = <&gpio3 0 1>;
	+ 4g-2 {
	+ label = "zbt-cpe102:green:4g-2";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +40,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ZBT-WA05.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WA05.dts
	+++ sys/gnu/dts/mips/ZBT-WA05.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
	model = "Zbtlink ZBT-WA05";
	@@ -15,17 +18,17 @@

	power {
	label = "zbt-wa05:blue:power";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "zbt-wa05:blue:usb";
	- gpios = <&gpio1 15 0>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	};

	air {
	label = "zbt-wa05:blue:air";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +40,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ZBT-WE1226.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE1226.dts
	+++ sys/gnu/dts/mips/ZBT-WE1226.dts
	@@ -1,50 +1,65 @@
	/dts-v1/;
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>

	-#include "mt7621.dtsi"
	+#include "mt7628an.dtsi"

	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Linksys RE6500";
	+ compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc";
	+ model = "Zbtlink ZBT-WE1226";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x4000000>;
	};

	- chosen {
	- bootargs = "console=ttyS0,57600";
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	};

	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "re6500:orange:wifi";
	- gpios = <&gpio0 0 0>;
	+ wan {
	+ label = "zbt-we1226:green:wan";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	};

	- power {
	- label = "re6500:white:power";
	- gpios = <&gpio0 9 0>;
	+ lan1 {
	+ label = "zbt-we1226:green:lan1";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
	- };

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	+ lan2 {
	+ label = "zbt-we1226:green:lan2";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };

	- wps {
	- label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ wlan {
	+ label = "zbt-we1226:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	+ };
	+};

	- reset {
	- label = "reset";
	- gpios = <&gpio0 11 0>;
	- linux,code = <0x198>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
	+ ralink,function = "gpio";
	};
	};
	};
	@@ -57,8 +72,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -85,37 +100,12 @@
	};
	};

	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&pcie {
	+&wmac {
	status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	+ ralink,mtd-eeprom = <&factory 0x4>;
	};

	&ethernet {
	mtd-mac-address = <&factory 0x2e>;
	+ mediatek,portmap = "llllw";
	};
	Index: sys/gnu/dts/mips/ZBT-WE1326.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE1326.dts
	+++ sys/gnu/dts/mips/ZBT-WE1326.dts
	@@ -2,26 +2,20 @@

	#include "mt7621.dtsi"

	-/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Firefly FireWRT";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	- };
	+/ {
	+ compatible = "zbtlink,zbt-we1326", "mediatek,mt7621-soc";
	+ model = "ZBT-WE1326";

	chosen {
	- bootargs = "console=ttyS0,57600";
	+ bootargs = "console=ttyS0,115200";
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	- };
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	};

	gpio-keys-polled {
	@@ -30,22 +24,21 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	- };
	-
	- power {
	- label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&sdhci {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	};

	&spi0 {
	@@ -56,8 +49,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -84,6 +77,10 @@
	};
	};

	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	&pcie {
	status = "okay";

	@@ -92,7 +89,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -101,20 +98,11 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};

	-&ethernet {
	- mtd-mac-address = <&factory 0xe000>;
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wdt", "rgmii2";
	- ralink,function = "gpio";
	- };
	- };
	+&sdhci {
	+ status = "okay";
	};
	Index: sys/gnu/dts/mips/ZBT-WE2026.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE2026.dts
	+++ sys/gnu/dts/mips/ZBT-WE2026.dts
	@@ -1,10 +1,13 @@
	/dts-v1/;

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	#include "mt7620n.dtsi"

	/ {
	- compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
	- model = "Zbtlink ZBT-WA05";
	+ compatible = "zbtlink,zbt-we2026", "ralink,mt7620n-soc";
	+ model = "Zbtlink ZBT-WE2026";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -14,18 +17,13 @@
	compatible = "gpio-leds";

	power {
	- label = "zbt-wa05:blue:power";
	- gpios = <&gpio1 14 1>;
	- };
	-
	- usb {
	- label = "zbt-wa05:blue:usb";
	- gpios = <&gpio1 15 0>;
	+ label = "zbt-we2026:red:power";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	- air {
	- label = "zbt-wa05:blue:air";
	- gpios = <&gpio3 0 1>;
	+ wlan {
	+ label = "zbt-we2026:green:wlan";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +35,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -47,10 +45,6 @@
	status = "okay";
	};

	-&gpio2 {
	- status = "okay";
	-};
	-
	&gpio3 {
	status = "okay";
	};
	@@ -63,7 +57,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -91,14 +84,6 @@
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	Index: sys/gnu/dts/mips/ZBT-WE3526.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE3526.dts
	+++ sys/gnu/dts/mips/ZBT-WE3526.dts
	@@ -2,9 +2,12 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG3526";
	+ compatible = "zbtlink,zbt-we3526", "mediatek,mt7621-soc";
	+ model = "ZBT-WE3526";

	memory@0 {
	device_type = "memory";
	@@ -17,12 +20,6 @@

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};
	};
	@@ -35,17 +32,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "zbt-wg3526:green:status";
	- gpios = <&gpio0 24 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -62,8 +50,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -83,7 +71,7 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	reg = <0x50000 0xfb0000>;
	};
	@@ -94,20 +82,23 @@
	status = "okay";

	pcie0 {
	- mt76@0,0 {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+
	+ led {
	+ led-sources = <2>;
	+ };
	};
	};

	pcie1 {
	- mt76@1,0 {
	+ wifi@14c3,7603 {
	+ compatible = "pci14c3,7603";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	};
	};
	};
	@@ -119,7 +110,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WE826-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE826-16M.dts
	+++ sys/gnu/dts/mips/ZBT-WE826-16M.dts
	@@ -1,16 +1,20 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "ZBT-WE826.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,zbt-we826-16m", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
	+ model = "ZBT-WE826 (16M)";
	+};

	&spi0 {
	status = "okay";

	- m25p80@0 {
	+ en25q128@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -31,9 +35,9 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x3b0000>;
	+ reg = <0x50000 0xfb0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WE826-32M.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE826-32M.dts
	+++ sys/gnu/dts/mips/ZBT-WE826-32M.dts
	@@ -1,16 +1,20 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "ZBT-WE826.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,zbt-we826-32m", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
	+ model = "ZBT-WE826 (32M)";
	+};

	&spi0 {
	status = "okay";

	- m25p80@0 {
	+ en25q128@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -31,9 +35,9 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WE826.dtsi
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE826.dtsi
	+++ sys/gnu/dts/mips/ZBT-WE826.dtsi
	@@ -1,10 +1,10 @@
	-/dts-v1/;
	-
	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
	- model = "ZBT-WE826";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -14,15 +14,15 @@
	compatible = "gpio-leds";
	power {
	label = "zbt-we826:green:power";
	- gpios = <&gpio1 14 0>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
	};
	usb {
	label = "zbt-we826:green:usb";
	- gpios = <&gpio1 15 0>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	};
	air {
	label = "zbt-we826:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,8 +33,8 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -51,42 +51,6 @@
	status = "okay";
	};

	-&spi0 {
	- status = "okay";
	-
	- en25q128@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "w25q128";
	- reg = <0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	-};
	-
	&sdhci {
	status = "okay";
	};
	@@ -101,7 +65,7 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	- ralink,port-map = "wllll";
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	Index: sys/gnu/dts/mips/ZBT-WG2626.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WG2626.dts
	+++ sys/gnu/dts/mips/ZBT-WG2626.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "zbtlink,zbt-wg2626", "mediatek,mt7621-soc";
	model = "ZBT-WG2626";

	memory@0 {
	@@ -17,12 +20,6 @@

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};
	};
	@@ -35,8 +32,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -45,7 +42,7 @@

	status {
	label = "zbt-wg2626:green:status";
	- gpios = <&gpio0 24 1>;
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -62,8 +59,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -98,7 +95,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -107,7 +104,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	@@ -119,7 +116,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WG3526-16M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ZBT-WG3526-16M.dts
	@@ -0,0 +1,12 @@
	+/dts-v1/;
	+
	+#include "ZBT-WG3526.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,zbt-wg3526-16m", "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
	+ model = "ZBT-WG3526 (16M)";
	+};
	+
	+&firmware {
	+ reg = <0x50000 0xfb0000>;
	+};
	Index: sys/gnu/dts/mips/ZBT-WG3526-32M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ZBT-WG3526-32M.dts
	@@ -0,0 +1,12 @@
	+/dts-v1/;
	+
	+#include "ZBT-WG3526.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,zbt-wg3526-32m", "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
	+ model = "ZBT-WG3526 (32M)";
	+};
	+
	+&firmware {
	+ reg = <0x50000 0x1fb0000>;
	+};
	Index: sys/gnu/dts/mips/ZBT-WG3526.dtsi
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WG3526.dtsi
	+++ sys/gnu/dts/mips/ZBT-WG3526.dtsi
	@@ -1,10 +1,10 @@
	-/dts-v1/;
	-
	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG3526";
	+ compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";

	memory@0 {
	device_type = "memory";
	@@ -17,12 +17,6 @@

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};
	};
	@@ -35,8 +29,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -45,7 +39,7 @@

	status {
	label = "zbt-wg3526:green:status";
	- gpios = <&gpio0 24 1>;
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -62,8 +56,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -83,9 +77,8 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	};
	};
	};
	@@ -94,20 +87,19 @@
	status = "okay";

	pcie0 {
	- mt76@0,0 {
	+ wifi@14c3,7603 {
	+ compatible = "pci14c3,7603";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};

	pcie1 {
	- mt76@1,0 {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -119,7 +111,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WR8305RT.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WR8305RT.dts
	+++ sys/gnu/dts/mips/ZBT-WR8305RT.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
	model = "Zbtlink ZBT-WR8305RT";
	@@ -11,17 +14,17 @@

	sys {
	label = "zbt-wr8305rt:green:sys";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "zbt-wr8305rt:green:usb";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "zbt-wr8305rt:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,8 +36,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -55,7 +58,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -92,6 +94,8 @@
	};

	&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "llllw";
	};
	@@ -102,11 +106,6 @@

	&pinctrl {
	state_default: pinctrl0 {
	- ephy {
	- ralink,group = "ephy";
	- ralink,function = "ephy";
	- };
	-
	default {
	ralink,group = "i2c", "uartf", "spi refclk", "wled";
	ralink,function = "gpio";
	Index: sys/gnu/dts/mips/ZL5900V2.dts
	===================================================================
	--- sys/gnu/dts/mips/ZL5900V2.dts
	+++ sys/gnu/dts/mips/ZL5900V2.dts
	@@ -2,16 +2,24 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "X8", "ralink,rt5350-soc";
	- model = "Poray X8";
	+ compatible = "zorlik,zl5900v2", "ralink,rt5350-soc";
	+ model = "Zorlik ZL5900V2";

	gpio-leds {
	compatible = "gpio-leds";

	+ lan {
	+ label = "zl5900v2:green:lan";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ };
	+
	power {
	- label = "x8:green:power";
	- gpios = <&gpio0 13 1>;
	+ label = "zl5900v2:blue:power";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -23,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,7 +45,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -68,7 +75,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	+ ralink,group = "jtag", "uartf";
	ralink,function = "gpio";
	};
	};
	@@ -79,19 +86,10 @@
	};

	&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	+ mediatek,portmap = <0>;
	+ mediatek,portdisable = <0x2f>;
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	};
	Index: sys/gnu/dts/mips/ZTE-Q7.dts
	===================================================================
	--- sys/gnu/dts/mips/ZTE-Q7.dts
	+++ sys/gnu/dts/mips/ZTE-Q7.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ZTE-Q7", "ralink,mt7620a-soc";
	+ compatible = "zte,q7", "ralink,mt7620a-soc";
	model = "ZTE Q7";

	gpio-leds {
	@@ -11,12 +14,12 @@

	statred {
	label = "zte-q7:red:status";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	statblue {
	label = "zte-q7:blue:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -50,7 +53,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -88,8 +90,6 @@
	};

	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	};
	@@ -109,3 +109,7 @@
	&ohci {
	status = "okay";
	};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	Index: sys/gnu/dts/mips/kn.dts
	===================================================================
	--- sys/gnu/dts/mips/kn.dts
	+++ sys/gnu/dts/mips/kn.dts
	@@ -2,9 +2,12 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "NBG-419N", "ralink,rt3052-soc";
	- model = "ZyXEL NBG-419N";
	+ compatible = "zyxel,keenetic", "ralink,rt3052-soc";
	+ model = "ZyXEL Keenetic";

	cfi@1f000000 {
	compatible = "cfi-flash";
	@@ -42,13 +45,18 @@
	compatible = "gpio-leds";

	power {
	- label = "nbg-419n:green:power";
	- gpios = <&gpio0 9 1>;
	+ label = "kn:green:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "kn:green:usb";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wps {
	- label = "nbg-419n:green:wps";
	- gpios = <&gpio0 14 1>;
	+ label = "kn:green:wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +68,21 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	+ linux,input-type = <EV_SW>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -75,7 +90,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "uartf";
	ralink,function = "gpio";
	};
	};
	@@ -92,3 +107,7 @@
	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/kn_rc.dts
	===================================================================
	--- sys/gnu/dts/mips/kn_rc.dts
	+++ sys/gnu/dts/mips/kn_rc.dts
	@@ -1,46 +1,60 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "DIR-320-B1", "ralink,rt5350-soc";
	- model = "D-Link DIR-320 B1";
	+ compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc";
	+ model = "ZyXEL Keenetic Omni";

	gpio-leds {
	compatible = "gpio-leds";

	- status {
	- label = "dir-320-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ wan {
	+ label = "kn_rc:green:wan";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	- label = "dir-320-b1:green:usb";
	- gpios = <&gpio0 14 1>;
	+ label = "kn_rc:green:usb";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	- wps {
	- label = "dir-320-b1:green:wps";
	- gpios = <&gpio0 13 1>;
	+ wifi {
	+ label = "kn_rc:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "kn_rc:green:power";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};
	};

	gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	+ compatible = "gpio-keys";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ fn {
	+ label = "fn";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};

	@@ -48,20 +62,22 @@
	compatible = "gpio-export";
	#size-cells = <0>;

	- usb {
	+ usb_power {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	- };
	-
	- root_hub {
	- gpio-export,name = "root_hub";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
	};
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -70,7 +86,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -101,7 +116,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
	ralink,function = "gpio";
	};
	};
	@@ -109,11 +124,7 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	+ mediatek,portmap = "llllw";
	};

	&wmac {
	Index: sys/gnu/dts/mips/kn_rf.dts
	===================================================================
	--- sys/gnu/dts/mips/kn_rf.dts
	+++ sys/gnu/dts/mips/kn_rf.dts
	@@ -1,46 +1,60 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "DIR-320-B1", "ralink,rt5350-soc";
	- model = "D-Link DIR-320 B1";
	+ compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc";
	+ model = "ZyXEL Keenetic Omni II";

	gpio-leds {
	compatible = "gpio-leds";

	- status {
	- label = "dir-320-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ wan {
	+ label = "kn_rc:green:wan";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	- label = "dir-320-b1:green:usb";
	- gpios = <&gpio0 14 1>;
	+ label = "kn_rc:green:usb";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	- wps {
	- label = "dir-320-b1:green:wps";
	- gpios = <&gpio0 13 1>;
	+ wifi {
	+ label = "kn_rc:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "kn_rc:green:power";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	+ compatible = "gpio-keys";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ fn {
	+ label = "fn";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};

	@@ -48,20 +62,22 @@
	compatible = "gpio-export";
	#size-cells = <0>;

	- usb {
	+ usb_power {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	- };
	-
	- root_hub {
	- gpio-export,name = "root_hub";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
	};
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -70,7 +86,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -101,7 +116,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
	ralink,function = "gpio";
	};
	};
	@@ -109,11 +124,7 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	Index: sys/gnu/dts/mips/kng_rc.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/kng_rc.dts
	@@ -0,0 +1,166 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc";
	+ model = "ZyXEL Keenetic Viva";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wan {
	+ label = "kng_rc:green:wan";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "kng_rc:green:usb";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power_alert {
	+ label = "kng_rc:red:power";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi {
	+ label = "kng_rc:green:wifi";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "kng_rc:green:power";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ fn {
	+ label = "fn";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usb_power {
	+ gpio-export,name = "usb";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ rtl8367rb {
	+ compatible = "realtek,rtl8367b";
	+ cpu_port = <7>;
	+ realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
	+ mdio = <&mdio0>;
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
	+ mtd-mac-address = <&factory 0x00004>;
	+
	+ port@4 {
	+ status = "okay";
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ phy-mode = "rgmii";
	+ phy-handle = <&phy4>;
	+ };
	+
	+ mdio0: mdio-bus {
	+ status = "okay";
	+
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&gsw {
	+ mediatek,port4 = "gmac";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/mt7620a.dtsi
	===================================================================
	--- sys/gnu/dts/mips/mt7620a.dtsi
	+++ sys/gnu/dts/mips/mt7620a.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -176,7 +176,7 @@
	};

	i2c: i2c@900 {
	- compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
	+ compatible = "ralink,rt2880-i2c";
	reg = <0x900 0x100>;

	resets = <&rstctrl 16>;
	@@ -192,7 +192,7 @@
	};

	i2s: i2s@a00 {
	- compatible = "ralink,mt7620a-i2s";
	+ compatible = "mediatek,mt7620-i2s";
	reg = <0xa00 0x100>;

	resets = <&rstctrl 17>;
	@@ -201,8 +201,11 @@
	interrupt-parent = <&intc>;
	interrupts = <10>;

	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	dmas = <&gdma 4>,
	- <&gdma 5>;
	+ <&gdma 6>;
	dma-names = "tx", "rx";

	status = "disabled";
	@@ -281,7 +284,7 @@
	};

	gdma: gdma@2800 {
	- compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
	+ compatible = "ralink,mt7620a-gdma", "ralink,rt3883-gdma";
	reg = <0x2800 0x800>;

	resets = <&rstctrl 14>;
	@@ -320,6 +323,13 @@
	};
	};

	+ gpio_i2s_pins: gpio_i2s {
	+ gpio_i2s {
	+ ralink,group = "uartf";
	+ ralink,function = "gpio i2s";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -355,6 +365,13 @@
	};
	};

	+ mdio_refclk_pins: mdio_refclk {
	+ mdio_refclk {
	+ ralink,group = "mdio";
	+ ralink,function = "refclk";
	+ };
	+ };
	+
	ephy_pins: ephy {
	ephy {
	ralink,group = "ephy";
	@@ -389,6 +406,13 @@
	ralink,function = "pcie rst";
	};
	};
	+
	+ pa_pins: pa {
	+ pa {
	+ ralink,group = "pa";
	+ ralink,function = "pa";
	+ };
	+ };
	};

	rstctrl: rstctrl {
	@@ -403,8 +427,9 @@

	usbphy: usbphy {
	compatible = "mediatek,mt7620-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";

	@@ -477,7 +502,7 @@
	interrupt-parent = <&intc>;
	interrupts = <18>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	status = "disabled";
	@@ -490,7 +515,7 @@
	interrupt-parent = <&intc>;
	interrupts = <18>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	status = "disabled";
	@@ -546,5 +571,3 @@
	ralink,eeprom = "soc_wmac.eeprom";
	};
	};
	-
	-#include "fbsd-mt7620a.dtsi"
	Index: sys/gnu/dts/mips/mt7620n.dtsi
	===================================================================
	--- sys/gnu/dts/mips/mt7620n.dtsi
	+++ sys/gnu/dts/mips/mt7620n.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -160,6 +160,22 @@
	status = "disabled";
	};

	+ i2c: i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x40>;
	@@ -228,6 +244,13 @@
	state_default: pinctrl0 {
	};

	+ ephy_pins: ephy {
	+ ephy {
	+ ralink,group = "ephy";
	+ ralink,function = "ephy";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -242,6 +265,13 @@
	};
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	uartlite_pins: uartlite {
	uart {
	ralink,group = "uartlite";
	@@ -262,8 +292,9 @@

	usbphy: usbphy {
	compatible = "mediatek,mt7620-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";

	@@ -292,6 +323,13 @@

	status = "disabled";
	};
	+
	+ port@4 {
	+ compatible = "mediatek,mt7620a-gsw-port", "mediatek,eth-port";
	+ reg = <4>;
	+
	+ status = "disabled";
	+ };
	};

	gsw: gsw@10110000 {
	@@ -303,7 +341,7 @@

	interrupt-parent = <&intc>;
	interrupts = <17>;
	- mediatek,port4 = "gmac";
	+ mediatek,port4 = "ephy";
	};

	ehci: ehci@101c0000 {
	@@ -313,7 +351,7 @@
	interrupt-parent = <&intc>;
	interrupts = <18>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	status = "disabled";
	@@ -323,7 +361,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	Index: sys/gnu/dts/mips/mt7621.dtsi
	===================================================================
	--- sys/gnu/dts/mips/mt7621.dtsi
	+++ sys/gnu/dts/mips/mt7621.dtsi
	@@ -3,7 +3,7 @@
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "mediatek,mtk7621-soc";
	+ compatible = "mediatek,mt7621-soc";

	cpus {
	cpu@0 {
	@@ -42,6 +42,8 @@
	clock-frequency = <50000000>;
	};

	+
	+
	palmbus: palmbus@1E000000 {
	compatible = "palmbus";
	reg = <0x1E000000 0x100000>;
	@@ -56,7 +58,7 @@
	};

	wdt: wdt@100 {
	- compatible = "mtk,mt7621-wdt";
	+ compatible = "mediatek,mt7621-wdt";
	reg = <0x100 0x100>;
	};

	@@ -89,6 +91,57 @@
	};
	};

	+ i2c: i2c@900 {
	+ compatible = "mediatek,mt7621-i2c";
	+ reg = <0x900 0x100>;
	+
	+ clocks = <&sysclock>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	+ i2s: i2s@a00 {
	+ compatible = "mediatek,mt7621-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ clocks = <&sysclock>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&gic>;
	+ interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>;
	+
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	+ dma-names = "tx", "rx";
	+
	+ status = "disabled";
	+ };
	+
	+ systick: systick@d00 {
	+ compatible = "ralink,mt7621-systick", "ralink,cevt-systick";
	+ reg = <0xd00 0x10>;
	+
	+ resets = <&rstctrl 28>;
	+ reset-names = "intc";
	+
	+ interrupt-parent = <&gic>;
	+ interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
	+ };
	+
	memc: memc@5000 {
	compatible = "mtk,mt7621-memc";
	reg = <0x300 0x100>;
	@@ -120,7 +173,7 @@
	};

	spi0: spi@b00 {
	- status = "okay";
	+ status = "disabled";

	compatible = "ralink,mt7621-spi";
	reg = <0xb00 0x100>;
	@@ -135,14 +188,40 @@

	pinctrl-names = "default";
	pinctrl-0 = <&spi_pins>;
	+ };

	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- reg = <0>;
	- spi-max-frequency = <10000000>;
	- m25p,chunked-io = <32>;
	- };
	+ gdma: gdma@2800 {
	+ compatible = "ralink,rt3883-gdma";
	+ reg = <0x2800 0x800>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&gic>;
	+ interrupts = <0 13 4>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <16>;
	+ #dma-requests = <16>;
	+
	+ status = "disabled";
	+ };
	+
	+ hsdma: hsdma@7000 {
	+ compatible = "mediatek,mt7621-hsdma";
	+ reg = <0x7000 0x1000>;
	+
	+ resets = <&rstctrl 5>;
	+ reset-names = "hsdma";
	+
	+ interrupt-parent = <&gic>;
	+ interrupts = <0 11 4>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <1>;
	+ #dma-requests = <1>;
	+
	+ status = "disabled";
	};
	};

	@@ -154,13 +233,6 @@
	state_default: pinctrl0 {
	};

	- spi_pins: spi {
	- spi {
	- ralink,group = "spi";
	- ralink,function = "spi";
	- };
	- };
	-
	i2c_pins: i2c {
	i2c {
	ralink,group = "i2c";
	@@ -168,6 +240,13 @@
	};
	};

	+ spi_pins: spi {
	+ spi {
	+ ralink,group = "spi";
	+ ralink,function = "spi";
	+ };
	+ };
	+
	uart1_pins: uart1 {
	uart1 {
	ralink,group = "uart1";
	@@ -248,6 +327,8 @@
	};

	sdhci: sdhci@1E130000 {
	+ status = "disabled";
	+
	compatible = "ralink,mt7620-sdhci";
	reg = <0x1E130000 0x4000>;

	@@ -261,6 +342,7 @@
	compatible = "mediatek,mt8173-xhci";
	reg = <0x1e1c0000 0x1000
	0x1e1d0700 0x0100>;
	+ reg-names = "mac", "ippc";

	clocks = <&sysclock>;
	clock-names = "sys_ck";
	@@ -296,6 +378,16 @@
	#size-cells = <1>;
	};

	+ hnat: hnat@1e100000 {
	+ compatible = "mediatek,mt7623-hnat";
	+ reg = <0x1e100000 0x10000>;
	+ mtketh-ppd = "eth0";
	+ mtketh-lan = "eth0";
	+ mtketh-wan = "eth0";
	+ resets = <&rstctrl 0>;
	+ reset-names = "mtketh";
	+ };
	+
	ethernet: ethernet@1e100000 {
	compatible = "mediatek,mt7621-eth";
	reg = <0x1e100000 0x10000>;
	@@ -353,7 +445,7 @@
	GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
	GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;

	- status = "okay";
	+ status = "disabled";

	resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
	reset-names = "pcie0", "pcie1", "pcie2";
	@@ -388,5 +480,3 @@
	};
	};
	};
	-
	-#include "fbsd-mt7621.dtsi"
	Index: sys/gnu/dts/mips/mt7628an.dtsi
	===================================================================
	--- sys/gnu/dts/mips/mt7628an.dtsi
	+++ sys/gnu/dts/mips/mt7628an.dtsi
	@@ -33,13 +33,13 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,mt7620a-sysc";
	+ compatible = "ralink,mt7620a-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	- watchdog: watchdog@120 {
	- compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
	- reg = <0x120 0x10>;
	+ watchdog: watchdog@100 {
	+ compatible = "ralink,mt7628an-wdt", "mediatek,mt7621-wdt";
	+ reg = <0x100 0x30>;

	resets = <&rstctrl 8>;
	reset-names = "wdt";
	@@ -110,7 +110,7 @@
	};

	i2c: i2c@900 {
	- compatible = "mediatek,mt7628-i2c";
	+ compatible = "mediatek,mt7621-i2c";
	reg = <0x900 0x100>;

	resets = <&rstctrl 16>;
	@@ -126,7 +126,7 @@
	};

	i2s: i2s@a00 {
	- compatible = "ralink,mt7620a-i2s";
	+ compatible = "mediatek,mt7628-i2s";
	reg = <0xa00 0x100>;

	resets = <&rstctrl 17>;
	@@ -135,8 +135,11 @@
	interrupt-parent = <&intc>;
	interrupts = <10>;

	- dmas = <&gdma 2>,
	- <&gdma 3>;
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	dma-names = "tx", "rx";

	status = "disabled";
	@@ -249,7 +252,7 @@
	};

	gdma: gdma@2800 {
	- compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
	+ compatible = "ralink,rt3883-gdma";
	reg = <0x2800 0x800>;

	resets = <&rstctrl 14>;
	@@ -295,6 +298,13 @@
	};
	};

	+ i2s_pins: i2s {
	+ i2s {
	+ ralink,group = "i2s";
	+ ralink,function = "i2s";
	+ };
	+ };
	+
	uart0_pins: uartlite {
	uartlite {
	ralink,group = "uart0";
	@@ -337,12 +347,19 @@
	};
	};

	- pcm_i2s_pins: i2s {
	- i2s {
	+ pcm_i2s_pins: pcm_i2s {
	+ pcm_i2s {
	ralink,group = "i2s";
	ralink,function = "pcm";
	};
	};
	+
	+ refclk_pins: refclk {
	+ refclk {
	+ ralink,group = "refclk";
	+ ralink,function = "refclk";
	+ };
	+ };
	};

	rstctrl: rstctrl {
	@@ -356,10 +373,11 @@
	};

	usbphy: usbphy@10120000 {
	- compatible = "ralink,mt7628an-usbphy", "mediatek,mt7620-usbphy";
	- reg = <0x10120000 0x4000>;
	- #phy-cells = <1>;
	+ compatible = "mediatek,mt7628-usbphy", "mediatek,mt7620-usbphy";
	+ reg = <0x10120000 0x1000>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	clocks = <&clkctrl 22 &clkctrl 25>;
	@@ -383,7 +401,7 @@
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -394,7 +412,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -471,8 +489,5 @@
	status = "disabled";

	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	-
	-#include "fbsd-mt7628an.dtsi"
	Index: sys/gnu/dts/mips/rt2880.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt2880.dtsi
	+++ sys/gnu/dts/mips/rt2880.dtsi
	@@ -5,7 +5,7 @@

	cpus {
	cpu@0 {
	- compatible = "mips,mips4KEc";
	+ compatible = "mips,mips24KEc";
	};
	};

	@@ -80,9 +80,6 @@
	ralink,register-map = [ 00 04 08 0c
	20 24 28 2c
	30 34 ];
	-
	- interrupt-parent = <&intc>;
	- interrupts = <7>;
	};

	gpio1: gpio@638 {
	@@ -117,6 +114,22 @@
	status = "disabled";
	};

	+ i2c: i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 9>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	uartlite: uartlite@c00 {
	compatible = "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;
	@@ -141,6 +154,13 @@
	};
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -166,6 +186,14 @@
	#clock-cells = <1>;
	};

	+ pci: pci@440000 {
	+ compatible = "ralink,rt288x-pci";
	+ reg = <0x00440000 0x20000>;
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ status = "disabled";
	+ };
	+
	ethernet: ethernet@400000 {
	compatible = "ralink,rt2880-eth";
	reg = <0x00400000 0x10000>;
	@@ -185,13 +213,13 @@
	compatible = "ralink,rt2880-port", "mediatek,eth-port";
	reg = <0>;
	};
	- };

	- mdio-bus {
	- compatible = "ralink,rt2880-mdio";
	- reg = <0x00400000 0x10000>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	+ mdio-bus {
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+ };
	};

	wmac: wmac@480000 {
	Index: sys/gnu/dts/mips/rt3050.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt3050.dtsi
	+++ sys/gnu/dts/mips/rt3050.dtsi
	@@ -34,7 +34,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,rt3050-sysc";
	+ compatible = "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -149,6 +149,57 @@
	status = "disabled";
	};

	+ gdma: gdma@700 {
	+ compatible = "ralink,rt305x-gdma";
	+ reg = <0x700 0x100>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <7>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <8>;
	+ #dma-requests = <8>;
	+
	+ status = "disabled";
	+ };
	+
	+ i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	+ i2s@a00 {
	+ compatible = "ralink,rt3050-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <10>;
	+
	+ txdma-req = <2>;
	+
	+ dmas = <&gdma 4>;
	+ dma-names = "tx";
	+
	+ status = "disabled";
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x100>;
	@@ -195,6 +246,13 @@
	};
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -202,6 +260,13 @@
	};
	};

	+ rgmii_pins: rgmii {
	+ rgmii {
	+ ralink,group = "rgmii";
	+ ralink,function = "rgmii";
	+ };
	+ };
	+
	uartlite_pins: uartlite {
	uart {
	ralink,group = "uartlite";
	@@ -222,6 +287,9 @@

	usbphy: usbphy {
	compatible = "ralink,rt3050-usbphy";
	+ #phy-cells = <0>;
	+
	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22>;
	reset-names = "host";
	clocks = <&clkctrl 18>;
	Index: sys/gnu/dts/mips/rt3352.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt3352.dtsi
	+++ sys/gnu/dts/mips/rt3352.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -146,6 +146,42 @@
	status = "disabled";
	};

	+ i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	+ i2s@a00 {
	+ compatible = "ralink,rt3352-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <10>;
	+
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	+ dma-names = "tx", "rx";
	+
	+ status = "disabled";
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,rt3352-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x40>;
	@@ -191,6 +227,23 @@
	pinctrl-names = "default";
	pinctrl-0 = <&uartlite_pins>;
	};
	+
	+ gdma: gdma@2800 {
	+ compatible = "ralink,rt3883-gdma";
	+ reg = <0x2800 0x800>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <7>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <16>;
	+ #dma-requests = <16>;
	+
	+ status = "disabled";
	+ };
	};

	pinctrl: pinctrl {
	@@ -202,6 +255,27 @@
	state_default: pinctrl0 {
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	+ mdio_pins: mdio {
	+ mdio {
	+ ralink,group = "mdio";
	+ ralink,function = "mdio";
	+ };
	+ };
	+
	+ rgmii_pins: rgmii {
	+ rgmii {
	+ ralink,group = "rgmii";
	+ ralink,function = "rgmii";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -260,8 +334,9 @@

	usbphy: usbphy {
	compatible = "ralink,rt3352-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	clocks = <&clkctrl 18 &clkctrl 20>;
	@@ -282,7 +357,7 @@
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -295,7 +370,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	Index: sys/gnu/dts/mips/rt3883.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt3883.dtsi
	+++ sys/gnu/dts/mips/rt3883.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -166,6 +166,42 @@
	status = "disabled";
	};

	+ i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	+ i2s@a00 {
	+ compatible = "ralink,rt3883-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <10>;
	+
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	+ dma-names = "tx", "rx";
	+
	+ status = "disabled";
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x40>;
	@@ -211,6 +247,23 @@
	pinctrl-names = "default";
	pinctrl-0 = <&uartlite_pins>;
	};
	+
	+ gdma: gdma@2800 {
	+ compatible = "ralink,rt3883-gdma";
	+ reg = <0x2800 0x800>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <7>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <16>;
	+ #dma-requests = <16>;
	+
	+ status = "disabled";
	+ };
	};

	pinctrl: pinctrl {
	@@ -222,6 +275,13 @@
	state_default: pinctrl0 {
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -246,6 +306,8 @@

	ethernet: ethernet@10100000 {
	compatible = "ralink,rt3883-eth";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	reg = <0x10100000 0x10000>;

	resets = <&rstctrl 21>;
	@@ -365,8 +427,9 @@

	usbphy: usbphy {
	compatible = "ralink,rt3352-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	clocks = <&clkctrl 22 &clkctrl 25>;
	@@ -387,7 +450,7 @@
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -400,7 +463,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -409,5 +472,3 @@
	status = "disabled";
	};
	};
	-
	-#include "fbsd-rt3883.dtsi"
	Index: sys/gnu/dts/mips/rt5350.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt5350.dtsi
	+++ sys/gnu/dts/mips/rt5350.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -138,7 +138,7 @@
	};

	i2c: i2c@900 {
	- compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
	+ compatible = "ralink,rt2880-i2c";
	reg = <0x900 0x100>;

	resets = <&rstctrl 16>;
	@@ -153,6 +153,26 @@
	status = "disabled";
	};

	+ i2s: i2s@a00 {
	+ compatible = "ralink,rt3352-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <10>;
	+
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	+ dma-names = "tx", "rx";
	+
	+ status = "disabled";
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x40>;
	@@ -208,6 +228,36 @@
	interrupt-parent = <&cpuintc>;
	interrupts = <7>;
	};
	+
	+ pcm: pcm@2000 {
	+ compatible = "ralink,rt5350-pcm";
	+ reg = <0x2000 0x800>;
	+
	+ resets = <&rstctrl 11>;
	+ reset-names = "pcm";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <4>;
	+
	+ status = "disabled";
	+ };
	+
	+ gdma: gdma@2800 {
	+ compatible = "ralink,rt3883-gdma";
	+ reg = <0x2800 0x800>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <7>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <16>;
	+ #dma-requests = <16>;
	+
	+ status = "disabled";
	+ };
	};

	pinctrl: pinctrl {
	@@ -219,13 +269,6 @@
	state_default: pinctrl0 {
	};

	- spi_pins: spi {
	- spi {
	- ralink,group = "spi";
	- ralink,function = "spi";
	- };
	- };
	-
	i2c_pins: i2c {
	i2c {
	ralink,group = "i2c";
	@@ -233,6 +276,13 @@
	};
	};

	+ spi_pins: spi {
	+ spi {
	+ ralink,group = "spi";
	+ ralink,function = "spi";
	+ };
	+ };
	+
	phy_led_pins: phy_led {
	phy_led {
	ralink,group = "led";
	@@ -274,8 +324,9 @@

	usbphy: usbphy {
	compatible = "ralink,rt3352-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	clocks = <&clkctrl 18>;
	@@ -320,7 +371,7 @@
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -331,7 +382,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;

File Metadata

Mime Type: text/plain
Expires: Wed, Nov 4, 12:41 PM (7 h, 28 m)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 41414748
Default Alt Text: D17955.1793796076.diff (534 KB)

D17955.1793796076.diffNo OneTemporaryActions

D17955.1793796076.diffView Options

File Metadata

Event Timeline

D17955.1793796076.diff
No OneTemporary
Actions

D17955.1793796076.diff
View Options