Page MenuHomeFreeBSD
Files F167961488

D19706.id55639.diff
No OneTemporary
Actions

D19706.id55639.diff
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.
Index: ObsoleteFiles.inc
===================================================================
--- ObsoleteFiles.inc
+++ ObsoleteFiles.inc
@@ -10946,5 +10946,8 @@
# 20011001: UUCP migration to ports
OLD_DIRS+=usr/libexec/uucp
+# 201904xx: FreeBSD's zlib.c moved from linkern to netgraph
+#OLD_FILES+=usr/include/sys/zlib.h
+#OLD_FILES+=usr/include/sys/zutil.h
.include "tools/build/mk/OptionalObsoleteFiles.inc"
Index: contrib/zlib/deflate.c
===================================================================
--- contrib/zlib/deflate.c
+++ contrib/zlib/deflate.c
@@ -1622,8 +1622,10 @@
/* Maximum stored block length in deflate format (not including header). */
#define MAX_STORED 65535
+#if !defined(MIN)
/* Minimum of a and b. */
#define MIN(a, b) ((a) > (b) ? (b) : (a))
+#endif
/* ===========================================================================
* Copy without compression as much as possible from the input stream, return
Index: contrib/zlib/trees.h
===================================================================
--- contrib/zlib/trees.h
+++ contrib/zlib/trees.h
@@ -125,4 +125,3 @@
32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576
};
-
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c
@@ -1,149 +0,0 @@
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2004 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#define ZLIB_INTERNAL
-#include "zlib.h"
-
-#define BASE 65521UL /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
-#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf) DO8(buf,0); DO8(buf,8);
-
-/* use NO_DIVIDE if your processor does not do division in hardware */
-#ifdef NO_DIVIDE
-# define MOD(a) \
- do { \
- if (a >= (BASE << 16)) a -= (BASE << 16); \
- if (a >= (BASE << 15)) a -= (BASE << 15); \
- if (a >= (BASE << 14)) a -= (BASE << 14); \
- if (a >= (BASE << 13)) a -= (BASE << 13); \
- if (a >= (BASE << 12)) a -= (BASE << 12); \
- if (a >= (BASE << 11)) a -= (BASE << 11); \
- if (a >= (BASE << 10)) a -= (BASE << 10); \
- if (a >= (BASE << 9)) a -= (BASE << 9); \
- if (a >= (BASE << 8)) a -= (BASE << 8); \
- if (a >= (BASE << 7)) a -= (BASE << 7); \
- if (a >= (BASE << 6)) a -= (BASE << 6); \
- if (a >= (BASE << 5)) a -= (BASE << 5); \
- if (a >= (BASE << 4)) a -= (BASE << 4); \
- if (a >= (BASE << 3)) a -= (BASE << 3); \
- if (a >= (BASE << 2)) a -= (BASE << 2); \
- if (a >= (BASE << 1)) a -= (BASE << 1); \
- if (a >= BASE) a -= BASE; \
- } while (0)
-# define MOD4(a) \
- do { \
- if (a >= (BASE << 4)) a -= (BASE << 4); \
- if (a >= (BASE << 3)) a -= (BASE << 3); \
- if (a >= (BASE << 2)) a -= (BASE << 2); \
- if (a >= (BASE << 1)) a -= (BASE << 1); \
- if (a >= BASE) a -= BASE; \
- } while (0)
-#else
-# define MOD(a) a %= BASE
-# define MOD4(a) a %= BASE
-#endif
-
-/* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
- uLong adler;
- const Bytef *buf;
- uInt len;
-{
- unsigned long sum2;
- unsigned n;
-
- /* split Adler-32 into component sums */
- sum2 = (adler >> 16) & 0xffff;
- adler &= 0xffff;
-
- /* in case user likes doing a byte at a time, keep it fast */
- if (len == 1) {
- adler += buf[0];
- if (adler >= BASE)
- adler -= BASE;
- sum2 += adler;
- if (sum2 >= BASE)
- sum2 -= BASE;
- return adler | (sum2 << 16);
- }
-
- /* initial Adler-32 value (deferred check for len == 1 speed) */
- if (buf == Z_NULL)
- return 1L;
-
- /* in case short lengths are provided, keep it somewhat fast */
- if (len < 16) {
- while (len--) {
- adler += *buf++;
- sum2 += adler;
- }
- if (adler >= BASE)
- adler -= BASE;
- MOD4(sum2); /* only added so many BASE's */
- return adler | (sum2 << 16);
- }
-
- /* do length NMAX blocks -- requires just one modulo operation */
- while (len >= NMAX) {
- len -= NMAX;
- n = NMAX / 16; /* NMAX is divisible by 16 */
- do {
- DO16(buf); /* 16 sums unrolled */
- buf += 16;
- } while (--n);
- MOD(adler);
- MOD(sum2);
- }
-
- /* do remaining bytes (less than NMAX, still just one modulo) */
- if (len) { /* avoid modulos if none remaining */
- while (len >= 16) {
- len -= 16;
- DO16(buf);
- buf += 16;
- }
- while (len--) {
- adler += *buf++;
- sum2 += adler;
- }
- MOD(adler);
- MOD(sum2);
- }
-
- /* return recombined sums */
- return adler | (sum2 << 16);
-}
-
-/* ========================================================================= */
-uLong ZEXPORT adler32_combine(adler1, adler2, len2)
- uLong adler1;
- uLong adler2;
- z_off_t len2;
-{
- unsigned long sum1;
- unsigned long sum2;
- unsigned rem;
-
- /* the derivation of this formula is left as an exercise for the reader */
- rem = (unsigned)(len2 % BASE);
- sum1 = adler1 & 0xffff;
- sum2 = rem * sum1;
- MOD(sum2);
- sum1 += (adler2 & 0xffff) + BASE - 1;
- sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
- if (sum1 > BASE) sum1 -= BASE;
- if (sum1 > BASE) sum1 -= BASE;
- if (sum2 > (BASE << 1)) sum2 -= (BASE << 1);
- if (sum2 > BASE) sum2 -= BASE;
- return sum1 | (sum2 << 16);
-}
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h
@@ -1,443 +0,0 @@
-/* crc32.h -- tables for rapid CRC calculation
- * Generated automatically by crc32.c
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-local const unsigned long FAR crc_table[TBLS][256] =
-{
- {
- 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
- 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
- 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
- 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
- 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
- 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
- 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
- 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
- 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
- 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
- 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
- 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
- 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
- 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
- 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
- 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
- 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
- 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
- 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
- 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
- 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
- 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
- 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
- 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
- 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
- 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
- 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
- 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
- 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
- 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
- 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
- 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
- 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
- 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
- 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
- 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
- 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
- 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
- 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
- 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
- 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
- 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
- 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
- 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
- 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
- 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
- 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
- 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
- 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
- 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
- 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
- 0x2d02ef8dUL
-#ifdef BYFOUR
- },
- {
- 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
- 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
- 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
- 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
- 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
- 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
- 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
- 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
- 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
- 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
- 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
- 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
- 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
- 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
- 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
- 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
- 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
- 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
- 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
- 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
- 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
- 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
- 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
- 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
- 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
- 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
- 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
- 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
- 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
- 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
- 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
- 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
- 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
- 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
- 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
- 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
- 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
- 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
- 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
- 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
- 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
- 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
- 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
- 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
- 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
- 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
- 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
- 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
- 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
- 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
- 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
- 0x9324fd72UL
- },
- {
- 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
- 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
- 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
- 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
- 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
- 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
- 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
- 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
- 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
- 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
- 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
- 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
- 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
- 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
- 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
- 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
- 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
- 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
- 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
- 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
- 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
- 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
- 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
- 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
- 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
- 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
- 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
- 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
- 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
- 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
- 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
- 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
- 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
- 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
- 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
- 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
- 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
- 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
- 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
- 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
- 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
- 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
- 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
- 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
- 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
- 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
- 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
- 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
- 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
- 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
- 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
- 0xbe9834edUL
- },
- {
- 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
- 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
- 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
- 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
- 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
- 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
- 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
- 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
- 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
- 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
- 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
- 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
- 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
- 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
- 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
- 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
- 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
- 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
- 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
- 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
- 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
- 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
- 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
- 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
- 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
- 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
- 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
- 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
- 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
- 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
- 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
- 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
- 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
- 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
- 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
- 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
- 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
- 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
- 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
- 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
- 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
- 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
- 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
- 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
- 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
- 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
- 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
- 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
- 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
- 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
- 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
- 0xde0506f1UL
- },
- {
- 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
- 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
- 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
- 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
- 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
- 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
- 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
- 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
- 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
- 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
- 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
- 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
- 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
- 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
- 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
- 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
- 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
- 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
- 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
- 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
- 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
- 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
- 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
- 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
- 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
- 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
- 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
- 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
- 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
- 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
- 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
- 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
- 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
- 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
- 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
- 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
- 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
- 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
- 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
- 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
- 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
- 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
- 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
- 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
- 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
- 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
- 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
- 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
- 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
- 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
- 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
- 0x8def022dUL
- },
- {
- 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
- 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
- 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
- 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
- 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
- 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
- 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
- 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
- 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
- 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
- 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
- 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
- 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
- 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
- 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
- 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
- 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
- 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
- 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
- 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
- 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
- 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
- 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
- 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
- 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
- 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
- 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
- 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
- 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
- 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
- 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
- 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
- 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
- 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
- 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
- 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
- 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
- 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
- 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
- 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
- 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
- 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
- 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
- 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
- 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
- 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
- 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
- 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
- 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
- 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
- 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
- 0x72fd2493UL
- },
- {
- 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
- 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
- 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
- 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
- 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
- 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
- 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
- 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
- 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
- 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
- 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
- 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
- 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
- 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
- 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
- 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
- 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
- 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
- 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
- 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
- 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
- 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
- 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
- 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
- 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
- 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
- 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
- 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
- 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
- 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
- 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
- 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
- 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
- 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
- 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
- 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
- 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
- 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
- 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
- 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
- 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
- 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
- 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
- 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
- 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
- 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
- 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
- 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
- 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
- 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
- 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
- 0xed3498beUL
- },
- {
- 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
- 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
- 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
- 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
- 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
- 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
- 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
- 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
- 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
- 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
- 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
- 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
- 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
- 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
- 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
- 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
- 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
- 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
- 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
- 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
- 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
- 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
- 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
- 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
- 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
- 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
- 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
- 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
- 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
- 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
- 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
- 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
- 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
- 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
- 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
- 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
- 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
- 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
- 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
- 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
- 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
- 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
- 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
- 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
- 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
- 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
- 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
- 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
- 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
- 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
- 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
- 0xf10605deUL
-#endif
- }
-};
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h
@@ -1,331 +0,0 @@
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-2004 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _DEFLATE_H
-#define _DEFLATE_H
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#include "zutil.h"
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
- trailer creation by deflate(). NO_GZIP would be used to avoid linking in
- the crc code when it is not needed. For shared libraries, gzip encoding
- should be left enabled. */
-#ifndef NO_GZIP
-# define GZIP
-#endif
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS 256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES 30
-/* number of distance codes */
-
-#define BL_CODES 19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE 42
-#define EXTRA_STATE 69
-#define NAME_STATE 73
-#define COMMENT_STATE 91
-#define HCRC_STATE 103
-#define BUSY_STATE 113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
- union {
- ush freq; /* frequency count */
- ush code; /* bit string */
- } fc;
- union {
- ush dad; /* father node in Huffman tree */
- ush len; /* length of bit string */
- } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad dl.dad
-#define Len dl.len
-
-typedef struct static_tree_desc_s static_tree_desc;
-
-typedef struct tree_desc_s {
- ct_data *dyn_tree; /* the dynamic tree */
- int max_code; /* largest code with non zero frequency */
- static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct internal_state {
- z_streamp strm; /* pointer back to this zlib stream */
- int status; /* as the name implies */
- Bytef *pending_buf; /* output still pending */
- ulg pending_buf_size; /* size of pending_buf */
- Bytef *pending_out; /* next pending byte to output to the stream */
- uInt pending; /* nb of bytes in the pending buffer */
- int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
- gz_headerp gzhead; /* gzip header information to write */
- uInt gzindex; /* where in extra, name, or comment */
- Byte method; /* STORED (for zip only) or DEFLATED */
- int last_flush; /* value of flush param for previous deflate call */
-
- /* used by deflate.c: */
-
- uInt w_size; /* LZ77 window size (32K by default) */
- uInt w_bits; /* log2(w_size) (8..16) */
- uInt w_mask; /* w_size - 1 */
-
- Bytef *window;
- /* Sliding window. Input bytes are read into the second half of the window,
- * and move to the first half later to keep a dictionary of at least wSize
- * bytes. With this organization, matches are limited to a distance of
- * wSize-MAX_MATCH bytes, but this ensures that IO is always
- * performed with a length multiple of the block size. Also, it limits
- * the window size to 64K, which is quite useful on MSDOS.
- * To do: use the user input buffer as sliding window.
- */
-
- ulg window_size;
- /* Actual size of window: 2*wSize, except when the user input buffer
- * is directly used as sliding window.
- */
-
- Posf *prev;
- /* Link to older string with same hash index. To limit the size of this
- * array to 64K, this link is maintained only for the last 32K strings.
- * An index in this array is thus a window index modulo 32K.
- */
-
- Posf *head; /* Heads of the hash chains or NIL. */
-
- uInt ins_h; /* hash index of string to be inserted */
- uInt hash_size; /* number of elements in hash table */
- uInt hash_bits; /* log2(hash_size) */
- uInt hash_mask; /* hash_size-1 */
-
- uInt hash_shift;
- /* Number of bits by which ins_h must be shifted at each input
- * step. It must be such that after MIN_MATCH steps, the oldest
- * byte no longer takes part in the hash key, that is:
- * hash_shift * MIN_MATCH >= hash_bits
- */
-
- long block_start;
- /* Window position at the beginning of the current output block. Gets
- * negative when the window is moved backwards.
- */
-
- uInt match_length; /* length of best match */
- IPos prev_match; /* previous match */
- int match_available; /* set if previous match exists */
- uInt strstart; /* start of string to insert */
- uInt match_start; /* start of matching string */
- uInt lookahead; /* number of valid bytes ahead in window */
-
- uInt prev_length;
- /* Length of the best match at previous step. Matches not greater than this
- * are discarded. This is used in the lazy match evaluation.
- */
-
- uInt max_chain_length;
- /* To speed up deflation, hash chains are never searched beyond this
- * length. A higher limit improves compression ratio but degrades the
- * speed.
- */
-
- uInt max_lazy_match;
- /* Attempt to find a better match only when the current match is strictly
- * smaller than this value. This mechanism is used only for compression
- * levels >= 4.
- */
-# define max_insert_length max_lazy_match
- /* Insert new strings in the hash table only if the match length is not
- * greater than this length. This saves time but degrades compression.
- * max_insert_length is used only for compression levels <= 3.
- */
-
- int level; /* compression level (1..9) */
- int strategy; /* favor or force Huffman coding*/
-
- uInt good_match;
- /* Use a faster search when the previous match is longer than this */
-
- int nice_match; /* Stop searching when current match exceeds this */
-
- /* used by trees.c: */
- /* Didn't use ct_data typedef below to supress compiler warning */
- struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
- struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
- struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
-
- struct tree_desc_s l_desc; /* desc. for literal tree */
- struct tree_desc_s d_desc; /* desc. for distance tree */
- struct tree_desc_s bl_desc; /* desc. for bit length tree */
-
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
- int heap_len; /* number of elements in the heap */
- int heap_max; /* element of largest frequency */
- /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
- * The same heap array is used to build all trees.
- */
-
- uch depth[2*L_CODES+1];
- /* Depth of each subtree used as tie breaker for trees of equal frequency
- */
-
- uchf *l_buf; /* buffer for literals or lengths */
-
- uInt lit_bufsize;
- /* Size of match buffer for literals/lengths. There are 4 reasons for
- * limiting lit_bufsize to 64K:
- * - frequencies can be kept in 16 bit counters
- * - if compression is not successful for the first block, all input
- * data is still in the window so we can still emit a stored block even
- * when input comes from standard input. (This can also be done for
- * all blocks if lit_bufsize is not greater than 32K.)
- * - if compression is not successful for a file smaller than 64K, we can
- * even emit a stored file instead of a stored block (saving 5 bytes).
- * This is applicable only for zip (not gzip or zlib).
- * - creating new Huffman trees less frequently may not provide fast
- * adaptation to changes in the input data statistics. (Take for
- * example a binary file with poorly compressible code followed by
- * a highly compressible string table.) Smaller buffer sizes give
- * fast adaptation but have of course the overhead of transmitting
- * trees more frequently.
- * - I can't count above 4
- */
-
- uInt last_lit; /* running index in l_buf */
-
- ushf *d_buf;
- /* Buffer for distances. To simplify the code, d_buf and l_buf have
- * the same number of elements. To use different lengths, an extra flag
- * array would be necessary.
- */
-
- ulg opt_len; /* bit length of current block with optimal trees */
- ulg static_len; /* bit length of current block with static trees */
- uInt matches; /* number of string matches in current block */
- int last_eob_len; /* bit length of EOB code for last block */
-
-#ifdef DEBUG
- ulg compressed_len; /* total bit length of compressed file mod 2^32 */
- ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
-#endif
-
- ush bi_buf;
- /* Output buffer. bits are inserted starting at the bottom (least
- * significant bits).
- */
- int bi_valid;
- /* Number of valid bits in bi_buf. All bits above the last valid bit
- * are always zero.
- */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
- /* in trees.c */
-void _tr_init OF((deflate_state *s));
-int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-void _tr_align OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-
-#define d_code(dist) \
- ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. _dist_code[256] and _dist_code[257] are never
- * used.
- */
-
-#ifndef DEBUG
-/* Inline versions of _tr_tally for speed: */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
- extern uch _length_code[];
- extern uch _dist_code[];
-#else
- extern const uch _length_code[];
- extern const uch _dist_code[];
-#endif
-
-# define _tr_tally_lit(s, c, flush) \
- { uch cc = (c); \
- s->d_buf[s->last_lit] = 0; \
- s->l_buf[s->last_lit++] = cc; \
- s->dyn_ltree[cc].Freq++; \
- flush = (s->last_lit == s->lit_bufsize-1); \
- }
-# define _tr_tally_dist(s, distance, length, flush) \
- { uch len = (length); \
- ush dist = (distance); \
- s->d_buf[s->last_lit] = dist; \
- s->l_buf[s->last_lit++] = len; \
- dist--; \
- s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
- s->dyn_dtree[d_code(dist)].Freq++; \
- flush = (s->last_lit == s->lit_bufsize-1); \
- }
-#else
-# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
-# define _tr_tally_dist(s, distance, length, flush) \
- flush = _tr_tally(s, distance, length)
-#endif
-
-#endif /* _DEFLATE_H */
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c
@@ -1,1742 +0,0 @@
-/*
- * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
- * Use is subject to license terms.
- */
-
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2005 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-/*
- * ALGORITHM
- *
- * The "deflation" process depends on being able to identify portions
- * of the input text which are identical to earlier input (within a
- * sliding window trailing behind the input currently being processed).
- *
- * The most straightforward technique turns out to be the fastest for
- * most input files: try all possible matches and select the longest.
- * The key feature of this algorithm is that insertions into the string
- * dictionary are very simple and thus fast, and deletions are avoided
- * completely. Insertions are performed at each input character, whereas
- * string matches are performed only when the previous match ends. So it
- * is preferable to spend more time in matches to allow very fast string
- * insertions and avoid deletions. The matching algorithm for small
- * strings is inspired from that of Rabin & Karp. A brute force approach
- * is used to find longer strings when a small match has been found.
- * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- * (by Leonid Broukhis).
- * A previous version of this file used a more sophisticated algorithm
- * (by Fiala and Greene) which is guaranteed to run in linear amortized
- * time, but has a larger average cost, uses more memory and is patented.
- * However the F&G algorithm may be faster for some highly redundant
- * files if the parameter max_chain_length (described below) is too large.
- *
- * ACKNOWLEDGEMENTS
- *
- * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- * I found it in 'freeze' written by Leonid Broukhis.
- * Thanks to many people for bug reports and testing.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- * Available in http://www.ietf.org/rfc/rfc1951.txt
- *
- * A description of the Rabin and Karp algorithm is given in the book
- * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- * Fiala,E.R., and Greene,D.H.
- * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-#include "deflate.h"
-
-static const char deflate_copyright[] =
- " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- * Function prototypes.
- */
-typedef enum {
- need_more, /* block not completed, need more input or more output */
- block_done, /* block flush performed */
- finish_started, /* finish started, need only more output at next deflate */
- finish_done /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast OF((deflate_state *s, int flush));
-#ifndef FASTEST
-local block_state deflate_slow OF((deflate_state *s, int flush));
-#endif
-local void lm_init OF((deflate_state *s));
-local void putShortMSB OF((deflate_state *s, uInt b));
-local void flush_pending OF((z_streamp strm));
-local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
-#ifndef FASTEST
-#ifdef ASMV
- void match_init OF((void)); /* asm code initialization */
- uInt longest_match OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match OF((deflate_state *s, IPos cur_match));
-#endif
-#endif
-local uInt longest_match_fast OF((deflate_state *s, IPos cur_match));
-
-#ifdef DEBUG
-local void check_match OF((deflate_state *s, IPos start, IPos match,
- int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-# define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
- ush good_length; /* reduce lazy search above this match length */
- ush max_lazy; /* do not perform lazy search above this match length */
- ush nice_length; /* quit search above this match length */
- ush max_chain;
- compress_func func;
-} config;
-
-#ifdef FASTEST
-local const config configuration_table[2] = {
-/* good lazy nice chain */
-/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
-/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */
-#else
-local const config configuration_table[10] = {
-/* good lazy nice chain */
-/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
-/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */
-/* 2 */ {4, 5, 16, 8, deflate_fast},
-/* 3 */ {4, 6, 32, 32, deflate_fast},
-
-/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
-/* 5 */ {8, 16, 32, 32, deflate_slow},
-/* 6 */ {8, 16, 128, 128, deflate_slow},
-/* 7 */ {8, 32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
-#endif
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN assertion: all calls to to UPDATE_HASH are made with consecutive
- * input characters, so that a running hash key can be computed from the
- * previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * If this file is compiled with -DFASTEST, the compression level is forced
- * to 1, and no hash chains are maintained.
- * IN assertion: all calls to to INSERT_STRING are made with consecutive
- * input characters and the first MIN_MATCH bytes of str are valid
- * (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#ifdef FASTEST
-#define INSERT_STRING(s, str, match_head) \
- (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
- match_head = s->head[s->ins_h], \
- s->head[s->ins_h] = (Pos)(str))
-#else
-#define INSERT_STRING(s, str, match_head) \
- (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
- match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
- s->head[s->ins_h] = (Pos)(str))
-#endif
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
- s->head[s->hash_size-1] = NIL; \
- (void) zmemzero((Bytef *)s->head, \
- (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int ZEXPORT deflateInit_(strm, level, version, stream_size)
- z_streamp strm;
- int level;
- const char *version;
- int stream_size;
-{
- return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
- Z_DEFAULT_STRATEGY, version, stream_size);
- /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
- version, stream_size)
- z_streamp strm;
- int level;
- int method;
- int windowBits;
- int memLevel;
- int strategy;
- const char *version;
- int stream_size;
-{
- deflate_state *s;
- int wrap = 1;
- static const char my_version[] = ZLIB_VERSION;
-
- ushf *overlay;
- /* We overlay pending_buf and d_buf+l_buf. This works since the average
- * output size for (length,distance) codes is <= 24 bits.
- */
-
- if (version == Z_NULL || version[0] != my_version[0] ||
- stream_size != sizeof(z_stream)) {
- return Z_VERSION_ERROR;
- }
- if (strm == Z_NULL) return Z_STREAM_ERROR;
-
- strm->msg = Z_NULL;
- if (strm->zalloc == (alloc_func)0) {
- strm->zalloc = zcalloc;
- strm->opaque = (voidpf)0;
- }
- if (strm->zfree == (free_func)0) strm->zfree = zcfree;
-
-#ifdef FASTEST
- if (level != 0) level = 1;
-#else
- if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-
- if (windowBits < 0) { /* suppress zlib wrapper */
- wrap = 0;
- windowBits = -windowBits;
- }
-#ifdef GZIP
- else if (windowBits > 15) {
- wrap = 2; /* write gzip wrapper instead */
- windowBits -= 16;
- }
-#endif
- if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
- windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
- strategy < 0 || strategy > Z_FIXED) {
- return Z_STREAM_ERROR;
- }
- if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */
- s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
- if (s == Z_NULL) return Z_MEM_ERROR;
- strm->state = (struct internal_state FAR *)s;
- s->strm = strm;
-
- s->wrap = wrap;
- s->gzhead = Z_NULL;
- s->w_bits = windowBits;
- s->w_size = 1 << s->w_bits;
- s->w_mask = s->w_size - 1;
-
- s->hash_bits = memLevel + 7;
- s->hash_size = 1 << s->hash_bits;
- s->hash_mask = s->hash_size - 1;
- s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
- s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
- s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
- s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
-
- s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
- overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
- s->pending_buf = (uchf *) overlay;
- s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
- if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
- s->pending_buf == Z_NULL) {
- s->status = FINISH_STATE;
- strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
- (void) deflateEnd (strm);
- return Z_MEM_ERROR;
- }
- s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
- s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
- s->level = level;
- s->strategy = strategy;
- s->method = (Byte)method;
-
- return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
- z_streamp strm;
- const Bytef *dictionary;
- uInt dictLength;
-{
- deflate_state *s;
- uInt length = dictLength;
- uInt n;
- IPos hash_head = 0;
-
- if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
- strm->state->wrap == 2 ||
- (strm->state->wrap == 1 && strm->state->status != INIT_STATE))
- return Z_STREAM_ERROR;
-
- s = strm->state;
- if (s->wrap)
- strm->adler = adler32(strm->adler, dictionary, dictLength);
-
- if (length < MIN_MATCH) return Z_OK;
- if (length > MAX_DIST(s)) {
- length = MAX_DIST(s);
- dictionary += dictLength - length; /* use the tail of the dictionary */
- }
- (void) zmemcpy(s->window, dictionary, length);
- s->strstart = length;
- s->block_start = (long)length;
-
- /* Insert all strings in the hash table (except for the last two bytes).
- * s->lookahead stays null, so s->ins_h will be recomputed at the next
- * call of fill_window.
- */
- s->ins_h = s->window[0];
- UPDATE_HASH(s, s->ins_h, s->window[1]);
- for (n = 0; n <= length - MIN_MATCH; n++) {
- INSERT_STRING(s, n, hash_head);
- }
- if (hash_head) hash_head = 0; /* to make compiler happy */
- return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateReset (strm)
- z_streamp strm;
-{
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
- return Z_STREAM_ERROR;
- }
-
- strm->total_in = strm->total_out = 0;
- strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
- strm->data_type = Z_UNKNOWN;
-
- s = (deflate_state *)strm->state;
- s->pending = 0;
- s->pending_out = s->pending_buf;
-
- if (s->wrap < 0) {
- s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
- }
- s->status = s->wrap ? INIT_STATE : BUSY_STATE;
- strm->adler =
-#ifdef GZIP
- s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
-#endif
- adler32(0L, Z_NULL, 0);
- s->last_flush = Z_NO_FLUSH;
-
- _tr_init(s);
- lm_init(s);
-
- return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetHeader (strm, head)
- z_streamp strm;
- gz_headerp head;
-{
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- if (strm->state->wrap != 2) return Z_STREAM_ERROR;
- strm->state->gzhead = head;
- return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflatePrime (strm, bits, value)
- z_streamp strm;
- int bits;
- int value;
-{
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- strm->state->bi_valid = bits;
- strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
- return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateParams(strm, level, strategy)
- z_streamp strm;
- int level;
- int strategy;
-{
- deflate_state *s;
- compress_func func;
- int err = Z_OK;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- s = strm->state;
-
-#ifdef FASTEST
- if (level != 0) level = 1;
-#else
- if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
- if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
- return Z_STREAM_ERROR;
- }
- func = configuration_table[s->level].func;
-
- if (func != configuration_table[level].func && strm->total_in != 0) {
- /* Flush the last buffer: */
- err = deflate(strm, Z_PARTIAL_FLUSH);
- }
- if (s->level != level) {
- s->level = level;
- s->max_lazy_match = configuration_table[level].max_lazy;
- s->good_match = configuration_table[level].good_length;
- s->nice_match = configuration_table[level].nice_length;
- s->max_chain_length = configuration_table[level].max_chain;
- }
- s->strategy = strategy;
- return err;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
- z_streamp strm;
- int good_length;
- int max_lazy;
- int nice_length;
- int max_chain;
-{
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- s = strm->state;
- s->good_match = good_length;
- s->max_lazy_match = max_lazy;
- s->nice_match = nice_length;
- s->max_chain_length = max_chain;
- return Z_OK;
-}
-
-/* =========================================================================
- * For the default windowBits of 15 and memLevel of 8, this function returns
- * a close to exact, as well as small, upper bound on the compressed size.
- * They are coded as constants here for a reason--if the #define's are
- * changed, then this function needs to be changed as well. The return
- * value for 15 and 8 only works for those exact settings.
- *
- * For any setting other than those defaults for windowBits and memLevel,
- * the value returned is a conservative worst case for the maximum expansion
- * resulting from using fixed blocks instead of stored blocks, which deflate
- * can emit on compressed data for some combinations of the parameters.
- *
- * This function could be more sophisticated to provide closer upper bounds
- * for every combination of windowBits and memLevel, as well as wrap.
- * But even the conservative upper bound of about 14% expansion does not
- * seem onerous for output buffer allocation.
- */
-uLong ZEXPORT deflateBound(strm, sourceLen)
- z_streamp strm;
- uLong sourceLen;
-{
- deflate_state *s;
- uLong destLen;
-
- /* conservative upper bound */
- destLen = sourceLen +
- ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11;
-
- /* if can't get parameters, return conservative bound */
- if (strm == Z_NULL || strm->state == Z_NULL)
- return destLen;
-
- /* if not default parameters, return conservative bound */
- s = strm->state;
- if (s->w_bits != 15 || s->hash_bits != 8 + 7)
- return destLen;
-
- /* default settings: return tight bound for that case */
- return compressBound(sourceLen);
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
- deflate_state *s;
- uInt b;
-{
- put_byte(s, (Byte)(b >> 8));
- put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
- z_streamp strm;
-{
- unsigned len = strm->state->pending;
-
- if (len > strm->avail_out) len = strm->avail_out;
- if (len == 0) return;
-
- zmemcpy(strm->next_out, strm->state->pending_out, len);
- strm->next_out += len;
- strm->state->pending_out += len;
- strm->total_out += len;
- strm->avail_out -= len;
- strm->state->pending -= len;
- if (strm->state->pending == 0) {
- strm->state->pending_out = strm->state->pending_buf;
- }
-}
-
-/* ========================================================================= */
-int ZEXPORT deflate (strm, flush)
- z_streamp strm;
- int flush;
-{
- int old_flush; /* value of flush param for previous deflate call */
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- flush > Z_FINISH || flush < 0) {
- return Z_STREAM_ERROR;
- }
- s = strm->state;
-
- if (strm->next_out == Z_NULL ||
- (strm->next_in == Z_NULL && strm->avail_in != 0) ||
- (s->status == FINISH_STATE && flush != Z_FINISH)) {
- ERR_RETURN(strm, Z_STREAM_ERROR);
- }
- if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
- s->strm = strm; /* just in case */
- old_flush = s->last_flush;
- s->last_flush = flush;
-
- /* Write the header */
- if (s->status == INIT_STATE) {
-#ifdef GZIP
- if (s->wrap == 2) {
- strm->adler = crc32(0L, Z_NULL, 0);
- put_byte(s, 31);
- put_byte(s, 139);
- put_byte(s, 8);
- if (s->gzhead == NULL) {
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, s->level == 9 ? 2 :
- (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
- 4 : 0));
- put_byte(s, OS_CODE);
- s->status = BUSY_STATE;
- }
- else {
- put_byte(s, (s->gzhead->text ? 1 : 0) +
- (s->gzhead->hcrc ? 2 : 0) +
- (s->gzhead->extra == Z_NULL ? 0 : 4) +
- (s->gzhead->name == Z_NULL ? 0 : 8) +
- (s->gzhead->comment == Z_NULL ? 0 : 16)
- );
- put_byte(s, (Byte)(s->gzhead->time & 0xff));
- put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
- put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
- put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
- put_byte(s, s->level == 9 ? 2 :
- (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
- 4 : 0));
- put_byte(s, s->gzhead->os & 0xff);
- if (s->gzhead->extra != NULL) {
- put_byte(s, s->gzhead->extra_len & 0xff);
- put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
- }
- if (s->gzhead->hcrc)
- strm->adler = crc32(strm->adler, s->pending_buf,
- s->pending);
- s->gzindex = 0;
- s->status = EXTRA_STATE;
- }
- }
- else
-#endif
- {
- uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
- uInt level_flags;
-
- if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
- level_flags = 0;
- else if (s->level < 6)
- level_flags = 1;
- else if (s->level == 6)
- level_flags = 2;
- else
- level_flags = 3;
- header |= (level_flags << 6);
- if (s->strstart != 0) header |= PRESET_DICT;
- header += 31 - (header % 31);
-
- s->status = BUSY_STATE;
- putShortMSB(s, header);
-
- /* Save the adler32 of the preset dictionary: */
- if (s->strstart != 0) {
- putShortMSB(s, (uInt)(strm->adler >> 16));
- putShortMSB(s, (uInt)(strm->adler & 0xffff));
- }
- strm->adler = adler32(0L, Z_NULL, 0);
- }
- }
-#ifdef GZIP
- if (s->status == EXTRA_STATE) {
- if (s->gzhead->extra != NULL) {
- uInt beg = s->pending; /* start of bytes to update crc */
-
- while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
- if (s->pending == s->pending_buf_size) {
- if (s->gzhead->hcrc && s->pending > beg)
- strm->adler = crc32(strm->adler, s->pending_buf + beg,
- s->pending - beg);
- flush_pending(strm);
- beg = s->pending;
- if (s->pending == s->pending_buf_size)
- break;
- }
- put_byte(s, s->gzhead->extra[s->gzindex]);
- s->gzindex++;
- }
- if (s->gzhead->hcrc && s->pending > beg)
- strm->adler = crc32(strm->adler, s->pending_buf + beg,
- s->pending - beg);
- if (s->gzindex == s->gzhead->extra_len) {
- s->gzindex = 0;
- s->status = NAME_STATE;
- }
- }
- else
- s->status = NAME_STATE;
- }
- if (s->status == NAME_STATE) {
- if (s->gzhead->name != NULL) {
- uInt beg = s->pending; /* start of bytes to update crc */
- int val;
-
- do {
- if (s->pending == s->pending_buf_size) {
- if (s->gzhead->hcrc && s->pending > beg)
- strm->adler = crc32(strm->adler, s->pending_buf + beg,
- s->pending - beg);
- flush_pending(strm);
- beg = s->pending;
- if (s->pending == s->pending_buf_size) {
- val = 1;
- break;
- }
- }
- val = s->gzhead->name[s->gzindex++];
- put_byte(s, val);
- } while (val != 0);
- if (s->gzhead->hcrc && s->pending > beg)
- strm->adler = crc32(strm->adler, s->pending_buf + beg,
- s->pending - beg);
- if (val == 0) {
- s->gzindex = 0;
- s->status = COMMENT_STATE;
- }
- }
- else
- s->status = COMMENT_STATE;
- }
- if (s->status == COMMENT_STATE) {
- if (s->gzhead->comment != NULL) {
- uInt beg = s->pending; /* start of bytes to update crc */
- int val;
-
- do {
- if (s->pending == s->pending_buf_size) {
- if (s->gzhead->hcrc && s->pending > beg)
- strm->adler = crc32(strm->adler, s->pending_buf + beg,
- s->pending - beg);
- flush_pending(strm);
- beg = s->pending;
- if (s->pending == s->pending_buf_size) {
- val = 1;
- break;
- }
- }
- val = s->gzhead->comment[s->gzindex++];
- put_byte(s, val);
- } while (val != 0);
- if (s->gzhead->hcrc && s->pending > beg)
- strm->adler = crc32(strm->adler, s->pending_buf + beg,
- s->pending - beg);
- if (val == 0)
- s->status = HCRC_STATE;
- }
- else
- s->status = HCRC_STATE;
- }
- if (s->status == HCRC_STATE) {
- if (s->gzhead->hcrc) {
- if (s->pending + 2 > s->pending_buf_size)
- flush_pending(strm);
- if (s->pending + 2 <= s->pending_buf_size) {
- put_byte(s, (Byte)(strm->adler & 0xff));
- put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
- strm->adler = crc32(0L, Z_NULL, 0);
- s->status = BUSY_STATE;
- }
- }
- else
- s->status = BUSY_STATE;
- }
-#endif
-
- /* Flush as much pending output as possible */
- if (s->pending != 0) {
- flush_pending(strm);
- if (strm->avail_out == 0) {
- /* Since avail_out is 0, deflate will be called again with
- * more output space, but possibly with both pending and
- * avail_in equal to zero. There won't be anything to do,
- * but this is not an error situation so make sure we
- * return OK instead of BUF_ERROR at next call of deflate:
- */
- s->last_flush = -1;
- return Z_OK;
- }
-
- /* Make sure there is something to do and avoid duplicate consecutive
- * flushes. For repeated and useless calls with Z_FINISH, we keep
- * returning Z_STREAM_END instead of Z_BUF_ERROR.
- */
- } else if (strm->avail_in == 0 && flush <= old_flush &&
- flush != Z_FINISH) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* User must not provide more input after the first FINISH: */
- if (s->status == FINISH_STATE && strm->avail_in != 0) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* Start a new block or continue the current one.
- */
- if (strm->avail_in != 0 || s->lookahead != 0 ||
- (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
- block_state bstate;
-
- bstate = (*(configuration_table[s->level].func))(s, flush);
-
- if (bstate == finish_started || bstate == finish_done) {
- s->status = FINISH_STATE;
- }
- if (bstate == need_more || bstate == finish_started) {
- if (strm->avail_out == 0) {
- s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
- }
- return Z_OK;
- /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
- * of deflate should use the same flush parameter to make sure
- * that the flush is complete. So we don't have to output an
- * empty block here, this will be done at next call. This also
- * ensures that for a very small output buffer, we emit at most
- * one empty block.
- */
- }
- if (bstate == block_done) {
- if (flush == Z_PARTIAL_FLUSH) {
- _tr_align(s);
- } else { /* FULL_FLUSH or SYNC_FLUSH */
- _tr_stored_block(s, (char*)0, 0L, 0);
- /* For a full flush, this empty block will be recognized
- * as a special marker by inflate_sync().
- */
- if (flush == Z_FULL_FLUSH) {
- CLEAR_HASH(s); /* forget history */
- }
- }
- flush_pending(strm);
- if (strm->avail_out == 0) {
- s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
- return Z_OK;
- }
- }
- }
- Assert(strm->avail_out > 0, "bug2");
-
- if (flush != Z_FINISH) return Z_OK;
- if (s->wrap <= 0) return Z_STREAM_END;
-
- /* Write the trailer */
-#ifdef GZIP
- if (s->wrap == 2) {
- put_byte(s, (Byte)(strm->adler & 0xff));
- put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
- put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
- put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
- put_byte(s, (Byte)(strm->total_in & 0xff));
- put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
- put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
- put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
- }
- else
-#endif
- {
- putShortMSB(s, (uInt)(strm->adler >> 16));
- putShortMSB(s, (uInt)(strm->adler & 0xffff));
- }
- flush_pending(strm);
- /* If avail_out is zero, the application will call deflate again
- * to flush the rest.
- */
- if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
- return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateEnd (strm)
- z_streamp strm;
-{
- int status;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-
- status = strm->state->status;
- if (status != INIT_STATE &&
- status != EXTRA_STATE &&
- status != NAME_STATE &&
- status != COMMENT_STATE &&
- status != HCRC_STATE &&
- status != BUSY_STATE &&
- status != FINISH_STATE) {
- return Z_STREAM_ERROR;
- }
-
- /* Deallocate in reverse order of allocations: */
- TRY_FREE(strm, strm->state->pending_buf);
- TRY_FREE(strm, strm->state->head);
- TRY_FREE(strm, strm->state->prev);
- TRY_FREE(strm, strm->state->window);
-
- ZFREE(strm, strm->state);
- strm->state = Z_NULL;
-
- return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- * To simplify the source, this is not supported for 16-bit MSDOS (which
- * doesn't have enough memory anyway to duplicate compression states).
- */
-int ZEXPORT deflateCopy (dest, source)
- z_streamp dest;
- z_streamp source;
-{
-#ifdef MAXSEG_64K
- return Z_STREAM_ERROR;
-#else
- deflate_state *ds;
- deflate_state *ss;
- ushf *overlay;
-
-
- if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
- return Z_STREAM_ERROR;
- }
-
- ss = source->state;
-
- zmemcpy(dest, source, sizeof(z_stream));
-
- ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
- if (ds == Z_NULL) return Z_MEM_ERROR;
- dest->state = (struct internal_state FAR *) ds;
- zmemcpy(ds, ss, sizeof(deflate_state));
- ds->strm = dest;
-
- ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
- ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
- ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
- overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
- ds->pending_buf = (uchf *) overlay;
-
- if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
- ds->pending_buf == Z_NULL) {
- deflateEnd (dest);
- return Z_MEM_ERROR;
- }
- /* following zmemcpy do not work for 16-bit MSDOS */
- zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
- zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
- zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
- zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
- ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
- ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
- ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
- ds->l_desc.dyn_tree = ds->dyn_ltree;
- ds->d_desc.dyn_tree = ds->dyn_dtree;
- ds->bl_desc.dyn_tree = ds->bl_tree;
-
- return Z_OK;
-#endif /* MAXSEG_64K */
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read. All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
- z_streamp strm;
- Bytef *buf;
- unsigned size;
-{
- unsigned len = strm->avail_in;
-
- if (len > size) len = size;
- if (len == 0) return 0;
-
- strm->avail_in -= len;
-
- if (strm->state->wrap == 1) {
- strm->adler = adler32(strm->adler, strm->next_in, len);
- }
-#ifdef GZIP
- else if (strm->state->wrap == 2) {
- strm->adler = crc32(strm->adler, strm->next_in, len);
- }
-#endif
- zmemcpy(buf, strm->next_in, len);
- strm->next_in += len;
- strm->total_in += len;
-
- return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
- deflate_state *s;
-{
- s->window_size = (ulg)2L*s->w_size;
-
- CLEAR_HASH(s);
-
- /* Set the default configuration parameters:
- */
- s->max_lazy_match = configuration_table[s->level].max_lazy;
- s->good_match = configuration_table[s->level].good_length;
- s->nice_match = configuration_table[s->level].nice_length;
- s->max_chain_length = configuration_table[s->level].max_chain;
-
- s->strstart = 0;
- s->block_start = 0L;
- s->lookahead = 0;
- s->match_length = s->prev_length = MIN_MATCH-1;
- s->match_available = 0;
- s->ins_h = 0;
-#ifndef FASTEST
-#ifdef ASMV
- match_init(); /* initialize the asm code */
-#endif
-#endif
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
- deflate_state *s;
- IPos cur_match; /* current match */
-{
- unsigned chain_length = s->max_chain_length;/* max hash chain length */
- register Bytef *scan = s->window + s->strstart; /* current string */
- register Bytef *match; /* matched string */
- register int len; /* length of current match */
- int best_len = s->prev_length; /* best match length so far */
- int nice_match = s->nice_match; /* stop if match long enough */
- IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
- s->strstart - (IPos)MAX_DIST(s) : NIL;
- /* Stop when cur_match becomes <= limit. To simplify the code,
- * we prevent matches with the string of window index 0.
- */
- Posf *prev = s->prev;
- uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
- /* Compare two bytes at a time. Note: this is not always beneficial.
- * Try with and without -DUNALIGNED_OK to check.
- */
- register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
- register ush scan_start = *(ushf*)scan;
- register ush scan_end = *(ushf*)(scan+best_len-1);
-#else
- register Bytef *strend = s->window + s->strstart + MAX_MATCH;
- register Byte scan_end1 = scan[best_len-1];
- register Byte scan_end = scan[best_len];
-#endif
-
- /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
- * It is easy to get rid of this optimization if necessary.
- */
- Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
- /* Do not waste too much time if we already have a good match: */
- if (s->prev_length >= s->good_match) {
- chain_length >>= 2;
- }
- /* Do not look for matches beyond the end of the input. This is necessary
- * to make deflate deterministic.
- */
- if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
- Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
- do {
- Assert(cur_match < s->strstart, "no future");
- match = s->window + cur_match;
-
- /* Skip to next match if the match length cannot increase
- * or if the match length is less than 2. Note that the checks below
- * for insufficient lookahead only occur occasionally for performance
- * reasons. Therefore uninitialized memory will be accessed, and
- * conditional jumps will be made that depend on those values.
- * However the length of the match is limited to the lookahead, so
- * the output of deflate is not affected by the uninitialized values.
- */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
- /* This code assumes sizeof(unsigned short) == 2. Do not use
- * UNALIGNED_OK if your compiler uses a different size.
- */
- if (*(ushf*)(match+best_len-1) != scan_end ||
- *(ushf*)match != scan_start) continue;
-
- /* It is not necessary to compare scan[2] and match[2] since they are
- * always equal when the other bytes match, given that the hash keys
- * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
- * strstart+3, +5, ... up to strstart+257. We check for insufficient
- * lookahead only every 4th comparison; the 128th check will be made
- * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
- * necessary to put more guard bytes at the end of the window, or
- * to check more often for insufficient lookahead.
- */
- Assert(scan[2] == match[2], "scan[2]?");
- scan++, match++;
- do {
- } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- scan < strend);
- /* The funny "do {}" generates better code on most compilers */
-
- /* Here, scan <= window+strstart+257 */
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
- if (*scan == *match) scan++;
-
- len = (MAX_MATCH - 1) - (int)(strend-scan);
- scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
- if (match[best_len] != scan_end ||
- match[best_len-1] != scan_end1 ||
- *match != *scan ||
- *++match != scan[1]) continue;
-
- /* The check at best_len-1 can be removed because it will be made
- * again later. (This heuristic is not always a win.)
- * It is not necessary to compare scan[2] and match[2] since they
- * are always equal when the other bytes match, given that
- * the hash keys are equal and that HASH_BITS >= 8.
- */
- scan += 2, match++;
- Assert(*scan == *match, "match[2]?");
-
- /* We check for insufficient lookahead only every 8th comparison;
- * the 256th check will be made at strstart+258.
- */
- do {
- } while (*++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- scan < strend);
-
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
- len = MAX_MATCH - (int)(strend - scan);
- scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
- if (len > best_len) {
- s->match_start = cur_match;
- best_len = len;
- if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
- scan_end = *(ushf*)(scan+best_len-1);
-#else
- scan_end1 = scan[best_len-1];
- scan_end = scan[best_len];
-#endif
- }
- } while ((cur_match = prev[cur_match & wmask]) > limit
- && --chain_length != 0);
-
- if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
- return s->lookahead;
-}
-#endif /* ASMV */
-#endif /* FASTEST */
-
-/* ---------------------------------------------------------------------------
- * Optimized version for level == 1 or strategy == Z_RLE only
- */
-local uInt longest_match_fast(s, cur_match)
- deflate_state *s;
- IPos cur_match; /* current match */
-{
- register Bytef *scan = s->window + s->strstart; /* current string */
- register Bytef *match; /* matched string */
- register int len; /* length of current match */
- register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-
- /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
- * It is easy to get rid of this optimization if necessary.
- */
- Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
- Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
- Assert(cur_match < s->strstart, "no future");
-
- match = s->window + cur_match;
-
- /* Return failure if the match length is less than 2:
- */
- if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
-
- /* The check at best_len-1 can be removed because it will be made
- * again later. (This heuristic is not always a win.)
- * It is not necessary to compare scan[2] and match[2] since they
- * are always equal when the other bytes match, given that
- * the hash keys are equal and that HASH_BITS >= 8.
- */
- scan += 2, match += 2;
- Assert(*scan == *match, "match[2]?");
-
- /* We check for insufficient lookahead only every 8th comparison;
- * the 256th check will be made at strstart+258.
- */
- do {
- } while (*++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- scan < strend);
-
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
- len = MAX_MATCH - (int)(strend - scan);
-
- if (len < MIN_MATCH) return MIN_MATCH - 1;
-
- s->match_start = cur_match;
- return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
-}
-
-#ifdef DEBUG
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
- deflate_state *s;
- IPos start, match;
- int length;
-{
- /* check that the match is indeed a match */
- if (zmemcmp(s->window + match,
- s->window + start, length) != EQUAL) {
- fprintf(stderr, " start %u, match %u, length %d\n",
- start, match, length);
- do {
- fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
- } while (--length != 0);
- z_error("invalid match");
- }
- if (z_verbose > 1) {
- fprintf(stderr,"\\[%d,%d]", start-match, length);
- do { putc(s->window[start++], stderr); } while (--length != 0);
- }
-}
-#else
-# define check_match(s, start, match, length)
-#endif /* DEBUG */
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- * At least one byte has been read, or avail_in == 0; reads are
- * performed for at least two bytes (required for the zip translate_eol
- * option -- not supported here).
- */
-local void fill_window(s)
- deflate_state *s;
-{
- register unsigned n, m;
- register Posf *p;
- unsigned more; /* Amount of free space at the end of the window. */
- uInt wsize = s->w_size;
-
- do {
- more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
- /* Deal with !@#$% 64K limit: */
- if (sizeof(int) <= 2) {
- if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
- more = wsize;
-
- } else if (more == (unsigned)(-1)) {
- /* Very unlikely, but possible on 16 bit machine if
- * strstart == 0 && lookahead == 1 (input done a byte at time)
- */
- more--;
- }
- }
-
- /* If the window is almost full and there is insufficient lookahead,
- * move the upper half to the lower one to make room in the upper half.
- */
- if (s->strstart >= wsize+MAX_DIST(s)) {
-
- zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
- s->match_start -= wsize;
- s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
- s->block_start -= (long) wsize;
-
- /* Slide the hash table (could be avoided with 32 bit values
- at the expense of memory usage). We slide even when level == 0
- to keep the hash table consistent if we switch back to level > 0
- later. (Using level 0 permanently is not an optimal usage of
- zlib, so we don't care about this pathological case.)
- */
- /* %%% avoid this when Z_RLE */
- n = s->hash_size;
- p = &s->head[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- } while (--n);
-
- n = wsize;
-#ifndef FASTEST
- p = &s->prev[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- /* If n is not on any hash chain, prev[n] is garbage but
- * its value will never be used.
- */
- } while (--n);
-#endif
- more += wsize;
- }
- if (s->strm->avail_in == 0) return;
-
- /* If there was no sliding:
- * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
- * more == window_size - lookahead - strstart
- * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
- * => more >= window_size - 2*WSIZE + 2
- * In the BIG_MEM or MMAP case (not yet supported),
- * window_size == input_size + MIN_LOOKAHEAD &&
- * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
- * Otherwise, window_size == 2*WSIZE so more >= 2.
- * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
- */
- Assert(more >= 2, "more < 2");
-
- n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
- s->lookahead += n;
-
- /* Initialize the hash value now that we have some input: */
- if (s->lookahead >= MIN_MATCH) {
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- }
- /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
- * but this is not important since only literal bytes will be emitted.
- */
-
- } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, eof) { \
- _tr_flush_block(s, (s->block_start >= 0L ? \
- (charf *)&s->window[(unsigned)s->block_start] : \
- (charf *)Z_NULL), \
- (ulg)((long)s->strstart - s->block_start), \
- (eof)); \
- s->block_start = s->strstart; \
- flush_pending(s->strm); \
- Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, eof) { \
- FLUSH_BLOCK_ONLY(s, eof); \
- if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
- deflate_state *s;
- int flush;
-{
- /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
- * to pending_buf_size, and each stored block has a 5 byte header:
- */
- ulg max_block_size = 0xffff;
- ulg max_start;
-
- if (max_block_size > s->pending_buf_size - 5) {
- max_block_size = s->pending_buf_size - 5;
- }
-
- /* Copy as much as possible from input to output: */
- for (;;) {
- /* Fill the window as much as possible: */
- if (s->lookahead <= 1) {
-
- Assert(s->strstart < s->w_size+MAX_DIST(s) ||
- s->block_start >= (long)s->w_size, "slide too late");
-
- fill_window(s);
- if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
- if (s->lookahead == 0) break; /* flush the current block */
- }
- Assert(s->block_start >= 0L, "block gone");
-
- s->strstart += s->lookahead;
- s->lookahead = 0;
-
- /* Emit a stored block if pending_buf will be full: */
- max_start = s->block_start + max_block_size;
- if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
- /* strstart == 0 is possible when wraparound on 16-bit machine */
- s->lookahead = (uInt)(s->strstart - max_start);
- s->strstart = (uInt)max_start;
- FLUSH_BLOCK(s, 0);
- }
- /* Flush if we may have to slide, otherwise block_start may become
- * negative and the data will be gone:
- */
- if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
- FLUSH_BLOCK(s, 0);
- }
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of the hash chain */
- int bflush; /* set if current block must be flushed */
-
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- * At this point we have always match_length < MIN_MATCH
- */
- if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
-#ifdef FASTEST
- if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) ||
- (s->strategy == Z_RLE && s->strstart - hash_head == 1)) {
- s->match_length = longest_match_fast (s, hash_head);
- }
-#else
- if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
- s->match_length = longest_match (s, hash_head);
- } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
- s->match_length = longest_match_fast (s, hash_head);
- }
-#endif
- /* longest_match() or longest_match_fast() sets match_start */
- }
- if (s->match_length >= MIN_MATCH) {
- check_match(s, s->strstart, s->match_start, s->match_length);
-
- _tr_tally_dist(s, s->strstart - s->match_start,
- s->match_length - MIN_MATCH, bflush);
-
- s->lookahead -= s->match_length;
-
- /* Insert new strings in the hash table only if the match length
- * is not too large. This saves time but degrades compression.
- */
-#ifndef FASTEST
- if (s->match_length <= s->max_insert_length &&
- s->lookahead >= MIN_MATCH) {
- s->match_length--; /* string at strstart already in table */
- do {
- s->strstart++;
- INSERT_STRING(s, s->strstart, hash_head);
- /* strstart never exceeds WSIZE-MAX_MATCH, so there are
- * always MIN_MATCH bytes ahead.
- */
- } while (--s->match_length != 0);
- s->strstart++;
- } else
-#endif
- {
- s->strstart += s->match_length;
- s->match_length = 0;
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
- * matter since it will be recomputed at next deflate call.
- */
- }
- } else {
- /* No match, output a literal byte */
- Tracevv((stderr,"%c", s->window[s->strstart]));
- _tr_tally_lit (s, s->window[s->strstart], bflush);
- s->lookahead--;
- s->strstart++;
- }
- if (bflush) FLUSH_BLOCK(s, 0);
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of hash chain */
- int bflush; /* set if current block must be flushed */
-
- /* Process the input block. */
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- */
- s->prev_length = s->match_length, s->prev_match = s->match_start;
- s->match_length = MIN_MATCH-1;
-
- if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
- s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
- s->match_length = longest_match (s, hash_head);
- } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
- s->match_length = longest_match_fast (s, hash_head);
- }
- /* longest_match() or longest_match_fast() sets match_start */
-
- if (s->match_length <= 5 && (s->strategy == Z_FILTERED
-#if TOO_FAR <= 32767
- || (s->match_length == MIN_MATCH &&
- s->strstart - s->match_start > TOO_FAR)
-#endif
- )) {
-
- /* If prev_match is also MIN_MATCH, match_start is garbage
- * but we will ignore the current match anyway.
- */
- s->match_length = MIN_MATCH-1;
- }
- }
- /* If there was a match at the previous step and the current
- * match is not better, output the previous match:
- */
- if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
- uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
- /* Do not insert strings in hash table beyond this. */
-
- check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
- _tr_tally_dist(s, s->strstart -1 - s->prev_match,
- s->prev_length - MIN_MATCH, bflush);
-
- /* Insert in hash table all strings up to the end of the match.
- * strstart-1 and strstart are already inserted. If there is not
- * enough lookahead, the last two strings are not inserted in
- * the hash table.
- */
- s->lookahead -= s->prev_length-1;
- s->prev_length -= 2;
- do {
- if (++s->strstart <= max_insert) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
- } while (--s->prev_length != 0);
- s->match_available = 0;
- s->match_length = MIN_MATCH-1;
- s->strstart++;
-
- if (bflush) FLUSH_BLOCK(s, 0);
-
- } else if (s->match_available) {
- /* If there was no match at the previous position, output a
- * single literal. If there was a match but the current match
- * is longer, truncate the previous match to a single literal.
- */
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- _tr_tally_lit(s, s->window[s->strstart-1], bflush);
- if (bflush) {
- FLUSH_BLOCK_ONLY(s, 0);
- }
- s->strstart++;
- s->lookahead--;
- if (s->strm->avail_out == 0) return need_more;
- } else {
- /* There is no previous match to compare with, wait for
- * the next step to decide.
- */
- s->match_available = 1;
- s->strstart++;
- s->lookahead--;
- }
- }
- Assert (flush != Z_NO_FLUSH, "no flush?");
- if (s->match_available) {
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- _tr_tally_lit(s, s->window[s->strstart-1], bflush);
- s->match_available = 0;
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-#endif /* FASTEST */
-
-#if 0
-/* ===========================================================================
- * For Z_RLE, simply look for runs of bytes, generate matches only of distance
- * one. Do not maintain a hash table. (It will be regenerated if this run of
- * deflate switches away from Z_RLE.)
- */
-local block_state deflate_rle(s, flush)
- deflate_state *s;
- int flush;
-{
- int bflush; /* set if current block must be flushed */
- uInt run; /* length of run */
- uInt max; /* maximum length of run */
- uInt prev; /* byte at distance one to match */
- Bytef *scan; /* scan for end of run */
-
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the longest encodable run.
- */
- if (s->lookahead < MAX_MATCH) {
- fill_window(s);
- if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* See how many times the previous byte repeats */
- run = 0;
- if (s->strstart > 0) { /* if there is a previous byte, that is */
- max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH;
- scan = s->window + s->strstart - 1;
- prev = *scan++;
- do {
- if (*scan++ != prev)
- break;
- } while (++run < max);
- }
-
- /* Emit match if have run of MIN_MATCH or longer, else emit literal */
- if (run >= MIN_MATCH) {
- check_match(s, s->strstart, s->strstart - 1, run);
- _tr_tally_dist(s, 1, run - MIN_MATCH, bflush);
- s->lookahead -= run;
- s->strstart += run;
- } else {
- /* No match, output a literal byte */
- Tracevv((stderr,"%c", s->window[s->strstart]));
- _tr_tally_lit (s, s->window[s->strstart], bflush);
- s->lookahead--;
- s->strstart++;
- }
- if (bflush) FLUSH_BLOCK(s, 0);
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-#endif
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h
@@ -1,13 +0,0 @@
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-2003 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-void inflate_fast OF((z_streamp strm, unsigned start));
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c
@@ -1,320 +0,0 @@
-/* inffast.c -- fast decoding
- * Copyright (C) 1995-2004 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-#ifndef ASMINF
-
-/* Allow machine dependent optimization for post-increment or pre-increment.
- Based on testing to date,
- Pre-increment preferred for:
- - PowerPC G3 (Adler)
- - MIPS R5000 (Randers-Pehrson)
- Post-increment preferred for:
- - none
- No measurable difference:
- - Pentium III (Anderson)
- - M68060 (Nikl)
- */
-#ifdef POSTINC
-# define OFF 0
-# define PUP(a) *(a)++
-#else
-# define OFF 1
-# define PUP(a) *++(a)
-#endif
-
-/*
- Decode literal, length, and distance codes and write out the resulting
- literal and match bytes until either not enough input or output is
- available, an end-of-block is encountered, or a data error is encountered.
- When large enough input and output buffers are supplied to inflate(), for
- example, a 16K input buffer and a 64K output buffer, more than 95% of the
- inflate execution time is spent in this routine.
-
- Entry assumptions:
-
- state->mode == LEN
- strm->avail_in >= 6
- strm->avail_out >= 258
- start >= strm->avail_out
- state->bits < 8
-
- On return, state->mode is one of:
-
- LEN -- ran out of enough output space or enough available input
- TYPE -- reached end of block code, inflate() to interpret next block
- BAD -- error in block data
-
- Notes:
-
- - The maximum input bits used by a length/distance pair is 15 bits for the
- length code, 5 bits for the length extra, 15 bits for the distance code,
- and 13 bits for the distance extra. This totals 48 bits, or six bytes.
- Therefore if strm->avail_in >= 6, then there is enough input to avoid
- checking for available input while decoding.
-
- - The maximum bytes that a single length/distance pair can output is 258
- bytes, which is the maximum length that can be coded. inflate_fast()
- requires strm->avail_out >= 258 for each loop to avoid checking for
- output space.
- */
-void inflate_fast(strm, start)
-z_streamp strm;
-unsigned start; /* inflate()'s starting value for strm->avail_out */
-{
- struct inflate_state FAR *state;
- unsigned char FAR *in; /* local strm->next_in */
- unsigned char FAR *last; /* while in < last, enough input available */
- unsigned char FAR *out; /* local strm->next_out */
- unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
- unsigned char FAR *end; /* while out < end, enough space available */
-#ifdef INFLATE_STRICT
- unsigned dmax; /* maximum distance from zlib header */
-#endif
- unsigned wsize; /* window size or zero if not using window */
- unsigned whave; /* valid bytes in the window */
- unsigned write; /* window write index */
- unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
- unsigned long hold; /* local strm->hold */
- unsigned bits; /* local strm->bits */
- code const FAR *lcode; /* local strm->lencode */
- code const FAR *dcode; /* local strm->distcode */
- unsigned lmask; /* mask for first level of length codes */
- unsigned dmask; /* mask for first level of distance codes */
- code this; /* retrieved table entry */
- unsigned op; /* code bits, operation, extra bits, or */
- /* window position, window bytes to copy */
- unsigned len; /* match length, unused bytes */
- unsigned dist; /* match distance */
- unsigned char FAR *from; /* where to copy match from */
-
- /* copy state to local variables */
- state = (struct inflate_state FAR *)strm->state;
- in = strm->next_in - OFF;
- last = in + (strm->avail_in - 5);
- out = strm->next_out - OFF;
- beg = out - (start - strm->avail_out);
- end = out + (strm->avail_out - 257);
-#ifdef INFLATE_STRICT
- dmax = state->dmax;
-#endif
- wsize = state->wsize;
- whave = state->whave;
- write = state->write;
- window = state->window;
- hold = state->hold;
- bits = state->bits;
- lcode = state->lencode;
- dcode = state->distcode;
- lmask = (1U << state->lenbits) - 1;
- dmask = (1U << state->distbits) - 1;
-
- /* decode literals and length/distances until end-of-block or not enough
- input data or output space */
- do {
- if (bits < 15) {
- hold += (unsigned long)(PUP(in)) << bits;
- bits += 8;
- hold += (unsigned long)(PUP(in)) << bits;
- bits += 8;
- }
- this = lcode[hold & lmask];
- dolen:
- op = (unsigned)(this.bits);
- hold >>= op;
- bits -= op;
- op = (unsigned)(this.op);
- if (op == 0) { /* literal */
- Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", this.val));
- PUP(out) = (unsigned char)(this.val);
- }
- else if (op & 16) { /* length base */
- len = (unsigned)(this.val);
- op &= 15; /* number of extra bits */
- if (op) {
- if (bits < op) {
- hold += (unsigned long)(PUP(in)) << bits;
- bits += 8;
- }
- len += (unsigned)hold & ((1U << op) - 1);
- hold >>= op;
- bits -= op;
- }
- Tracevv((stderr, "inflate: length %u\n", len));
- if (bits < 15) {
- hold += (unsigned long)(PUP(in)) << bits;
- bits += 8;
- hold += (unsigned long)(PUP(in)) << bits;
- bits += 8;
- }
- this = dcode[hold & dmask];
- dodist:
- op = (unsigned)(this.bits);
- hold >>= op;
- bits -= op;
- op = (unsigned)(this.op);
- if (op & 16) { /* distance base */
- dist = (unsigned)(this.val);
- op &= 15; /* number of extra bits */
- if (bits < op) {
- hold += (unsigned long)(PUP(in)) << bits;
- bits += 8;
- if (bits < op) {
- hold += (unsigned long)(PUP(in)) << bits;
- bits += 8;
- }
- }
- dist += (unsigned)hold & ((1U << op) - 1);
-#ifdef INFLATE_STRICT
- if (dist > dmax) {
- strm->msg = (char *)"invalid distance too far back";
- state->mode = BAD;
- break;
- }
-#endif
- hold >>= op;
- bits -= op;
- Tracevv((stderr, "inflate: distance %u\n", dist));
- op = (unsigned)(out - beg); /* max distance in output */
- if (dist > op) { /* see if copy from window */
- op = dist - op; /* distance back in window */
- if (op > whave) {
- strm->msg = (char *)"invalid distance too far back";
- state->mode = BAD;
- break;
- }
- from = window - OFF;
- if (write == 0) { /* very common case */
- from += wsize - op;
- if (op < len) { /* some from window */
- len -= op;
- do {
- PUP(out) = PUP(from);
- } while (--op);
- from = out - dist; /* rest from output */
- }
- }
- else if (write < op) { /* wrap around window */
- from += wsize + write - op;
- op -= write;
- if (op < len) { /* some from end of window */
- len -= op;
- do {
- PUP(out) = PUP(from);
- } while (--op);
- from = window - OFF;
- if (write < len) { /* some from start of window */
- op = write;
- len -= op;
- do {
- PUP(out) = PUP(from);
- } while (--op);
- from = out - dist; /* rest from output */
- }
- }
- }
- else { /* contiguous in window */
- from += write - op;
- if (op < len) { /* some from window */
- len -= op;
- do {
- PUP(out) = PUP(from);
- } while (--op);
- from = out - dist; /* rest from output */
- }
- }
- while (len > 2) {
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- len -= 3;
- }
- if (len) {
- PUP(out) = PUP(from);
- if (len > 1)
- PUP(out) = PUP(from);
- }
- }
- else {
- from = out - dist; /* copy direct from output */
- do { /* minimum length is three */
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- len -= 3;
- } while (len > 2);
- if (len) {
- PUP(out) = PUP(from);
- if (len > 1)
- PUP(out) = PUP(from);
- }
- }
- }
- else if ((op & 64) == 0) { /* 2nd level distance code */
- this = dcode[this.val + (hold & ((1U << op) - 1))];
- goto dodist;
- }
- else {
- strm->msg = (char *)"invalid distance code";
- state->mode = BAD;
- break;
- }
- }
- else if ((op & 64) == 0) { /* 2nd level length code */
- this = lcode[this.val + (hold & ((1U << op) - 1))];
- goto dolen;
- }
- else if (op & 32) { /* end-of-block */
- Tracevv((stderr, "inflate: end of block\n"));
- state->mode = TYPE;
- break;
- }
- else {
- strm->msg = (char *)"invalid literal/length code";
- state->mode = BAD;
- break;
- }
- } while (in < last && out < end);
-
- /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
- len = bits >> 3;
- in -= len;
- bits -= len << 3;
- hold &= (1U << bits) - 1;
-
- /* update state and return */
- strm->next_in = in + OFF;
- strm->next_out = out + OFF;
- strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
- strm->avail_out = (unsigned)(out < end ?
- 257 + (end - out) : 257 - (out - end));
- state->hold = hold;
- state->bits = bits;
- return;
-}
-
-/*
- inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
- - Using bit fields for code structure
- - Different op definition to avoid & for extra bits (do & for table bits)
- - Three separate decoding do-loops for direct, window, and write == 0
- - Special case for distance > 1 copies to do overlapped load and store copy
- - Explicit branch predictions (based on measured branch probabilities)
- - Deferring match copy and interspersed it with decoding subsequent codes
- - Swapping literal/length else
- - Swapping window/direct else
- - Larger unrolled copy loops (three is about right)
- - Moving len -= 3 statement into middle of loop
- */
-
-#endif /* !ASMINF */
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h
@@ -1,96 +0,0 @@
- /* inffixed.h -- table for decoding fixed codes
- * Generated automatically by makefixed().
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
- /* WARNING: this file should *not* be used by applications. It
- is part of the implementation of the compression library and
- is subject to change. Applications should only use zlib.h.
- */
-
- static const code lenfix[512] = {
- {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
- {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
- {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
- {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
- {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
- {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
- {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
- {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
- {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
- {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
- {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
- {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
- {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
- {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
- {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
- {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
- {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
- {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
- {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
- {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
- {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
- {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
- {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
- {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
- {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
- {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
- {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
- {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
- {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
- {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
- {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
- {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
- {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
- {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
- {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
- {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
- {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
- {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
- {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
- {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
- {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
- {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
- {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
- {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
- {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
- {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
- {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
- {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
- {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
- {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
- {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
- {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
- {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
- {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
- {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
- {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
- {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
- {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
- {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
- {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
- {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
- {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
- {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
- {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
- {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
- {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
- {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
- {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
- {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
- {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
- {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
- {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
- {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
- {0,9,255}
- };
-
- static const code distfix[32] = {
- {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
- {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
- {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
- {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
- {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
- {22,5,193},{64,5,0}
- };
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h
@@ -1,117 +0,0 @@
-/* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2004 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
- trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
- the crc code when it is not needed. For shared libraries, gzip decoding
- should be left enabled. */
-#ifndef NO_GZIP
-# define GUNZIP
-#endif
-
-/* Possible inflate modes between inflate() calls */
-typedef enum {
- HEAD, /* i: waiting for magic header */
- FLAGS, /* i: waiting for method and flags (gzip) */
- TIME, /* i: waiting for modification time (gzip) */
- OS, /* i: waiting for extra flags and operating system (gzip) */
- EXLEN, /* i: waiting for extra length (gzip) */
- EXTRA, /* i: waiting for extra bytes (gzip) */
- NAME, /* i: waiting for end of file name (gzip) */
- COMMENT, /* i: waiting for end of comment (gzip) */
- HCRC, /* i: waiting for header crc (gzip) */
- DICTID, /* i: waiting for dictionary check value */
- DICT, /* waiting for inflateSetDictionary() call */
- TYPE, /* i: waiting for type bits, including last-flag bit */
- TYPEDO, /* i: same, but skip check to exit inflate on new block */
- STORED, /* i: waiting for stored size (length and complement) */
- COPY, /* i/o: waiting for input or output to copy stored block */
- TABLE, /* i: waiting for dynamic block table lengths */
- LENLENS, /* i: waiting for code length code lengths */
- CODELENS, /* i: waiting for length/lit and distance code lengths */
- LEN, /* i: waiting for length/lit code */
- LENEXT, /* i: waiting for length extra bits */
- DIST, /* i: waiting for distance code */
- DISTEXT, /* i: waiting for distance extra bits */
- MATCH, /* o: waiting for output space to copy string */
- LIT, /* o: waiting for output space to write literal */
- CHECK, /* i: waiting for 32-bit check value */
- LENGTH, /* i: waiting for 32-bit length (gzip) */
- DONE, /* finished check, done -- remain here until reset */
- BAD, /* got a data error -- remain here until reset */
- MEM, /* got an inflate() memory error -- remain here until reset */
- SYNC /* looking for synchronization bytes to restart inflate() */
-} inflate_mode;
-
-/*
- State transitions between above modes -
-
- (most modes can go to the BAD or MEM mode -- not shown for clarity)
-
- Process header:
- HEAD -> (gzip) or (zlib)
- (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
- NAME -> COMMENT -> HCRC -> TYPE
- (zlib) -> DICTID or TYPE
- DICTID -> DICT -> TYPE
- Read deflate blocks:
- TYPE -> STORED or TABLE or LEN or CHECK
- STORED -> COPY -> TYPE
- TABLE -> LENLENS -> CODELENS -> LEN
- Read deflate codes:
- LEN -> LENEXT or LIT or TYPE
- LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
- LIT -> LEN
- Process trailer:
- CHECK -> LENGTH -> DONE
- */
-
-/* state maintained between inflate() calls. Approximately 7K bytes. */
-struct inflate_state {
- inflate_mode mode; /* current inflate mode */
- int last; /* true if processing last block */
- int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
- int havedict; /* true if dictionary provided */
- int flags; /* gzip header method and flags (0 if zlib) */
- unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
- unsigned long check; /* protected copy of check value */
- unsigned long total; /* protected copy of output count */
- gz_headerp head; /* where to save gzip header information */
- /* sliding window */
- unsigned wbits; /* log base 2 of requested window size */
- unsigned wsize; /* window size or zero if not using window */
- unsigned whave; /* valid bytes in the window */
- unsigned write; /* window write index */
- unsigned char FAR *window; /* allocated sliding window, if needed */
- /* bit accumulator */
- unsigned long hold; /* input bit accumulator */
- unsigned bits; /* number of bits in "in" */
- /* for string and stored block copying */
- unsigned length; /* literal or length of data to copy */
- unsigned offset; /* distance back to copy string from */
- /* for table and code decoding */
- unsigned extra; /* extra bits needed */
- /* fixed and dynamic code tables */
- code const FAR *lencode; /* starting table for length/literal codes */
- code const FAR *distcode; /* starting table for distance codes */
- unsigned lenbits; /* index bits for lencode */
- unsigned distbits; /* index bits for distcode */
- /* dynamic table building */
- unsigned ncode; /* number of code length code lengths */
- unsigned nlen; /* number of length code lengths */
- unsigned ndist; /* number of distance code lengths */
- unsigned have; /* number of code lengths in lens[] */
- code FAR *next; /* next available space in codes[] */
- unsigned short lens[320]; /* temporary storage for code lengths */
- unsigned short work[288]; /* work area for code table building */
- code codes[ENOUGH]; /* space for code tables */
-};
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c
@@ -1,1395 +0,0 @@
-/*
- * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
- * Use is subject to license terms.
- */
-
-/* inflate.c -- zlib decompression
- * Copyright (C) 1995-2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-/*
- * Change history:
- *
- * 1.2.beta0 24 Nov 2002
- * - First version -- complete rewrite of inflate to simplify code, avoid
- * creation of window when not needed, minimize use of window when it is
- * needed, make inffast.c even faster, implement gzip decoding, and to
- * improve code readability and style over the previous zlib inflate code
- *
- * 1.2.beta1 25 Nov 2002
- * - Use pointers for available input and output checking in inffast.c
- * - Remove input and output counters in inffast.c
- * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
- * - Remove unnecessary second byte pull from length extra in inffast.c
- * - Unroll direct copy to three copies per loop in inffast.c
- *
- * 1.2.beta2 4 Dec 2002
- * - Change external routine names to reduce potential conflicts
- * - Correct filename to inffixed.h for fixed tables in inflate.c
- * - Make hbuf[] unsigned char to match parameter type in inflate.c
- * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
- * to avoid negation problem on Alphas (64 bit) in inflate.c
- *
- * 1.2.beta3 22 Dec 2002
- * - Add comments on state->bits assertion in inffast.c
- * - Add comments on op field in inftrees.h
- * - Fix bug in reuse of allocated window after inflateReset()
- * - Remove bit fields--back to byte structure for speed
- * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
- * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
- * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
- * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
- * - Use local copies of stream next and avail values, as well as local bit
- * buffer and bit count in inflate()--for speed when inflate_fast() not used
- *
- * 1.2.beta4 1 Jan 2003
- * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
- * - Move a comment on output buffer sizes from inffast.c to inflate.c
- * - Add comments in inffast.c to introduce the inflate_fast() routine
- * - Rearrange window copies in inflate_fast() for speed and simplification
- * - Unroll last copy for window match in inflate_fast()
- * - Use local copies of window variables in inflate_fast() for speed
- * - Pull out common write == 0 case for speed in inflate_fast()
- * - Make op and len in inflate_fast() unsigned for consistency
- * - Add FAR to lcode and dcode declarations in inflate_fast()
- * - Simplified bad distance check in inflate_fast()
- * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
- * source file infback.c to provide a call-back interface to inflate for
- * programs like gzip and unzip -- uses window as output buffer to avoid
- * window copying
- *
- * 1.2.beta5 1 Jan 2003
- * - Improved inflateBack() interface to allow the caller to provide initial
- * input in strm.
- * - Fixed stored blocks bug in inflateBack()
- *
- * 1.2.beta6 4 Jan 2003
- * - Added comments in inffast.c on effectiveness of POSTINC
- * - Typecasting all around to reduce compiler warnings
- * - Changed loops from while (1) or do {} while (1) to for (;;), again to
- * make compilers happy
- * - Changed type of window in inflateBackInit() to unsigned char *
- *
- * 1.2.beta7 27 Jan 2003
- * - Changed many types to unsigned or unsigned short to avoid warnings
- * - Added inflateCopy() function
- *
- * 1.2.0 9 Mar 2003
- * - Changed inflateBack() interface to provide separate opaque descriptors
- * for the in() and out() functions
- * - Changed inflateBack() argument and in_func typedef to swap the length
- * and buffer address return values for the input function
- * - Check next_in and next_out for Z_NULL on entry to inflate()
- *
- * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-#ifdef MAKEFIXED
-# ifndef BUILDFIXED
-# define BUILDFIXED
-# endif
-#endif
-
-/* function prototypes */
-local void fixedtables OF((struct inflate_state FAR *state));
-local int updatewindow OF((z_streamp strm, unsigned out));
-#ifdef BUILDFIXED
- void makefixed OF((void));
-#endif
-local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf,
- unsigned len));
-
-int ZEXPORT inflateReset(strm)
-z_streamp strm;
-{
- struct inflate_state FAR *state;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)strm->state;
- strm->total_in = strm->total_out = state->total = 0;
- strm->msg = Z_NULL;
- strm->adler = 1; /* to support ill-conceived Java test suite */
- state->mode = HEAD;
- state->last = 0;
- state->havedict = 0;
- state->dmax = 32768U;
- state->head = Z_NULL;
- state->wsize = 0;
- state->whave = 0;
- state->write = 0;
- state->hold = 0;
- state->bits = 0;
- state->lencode = state->distcode = state->next = state->codes;
- Tracev((stderr, "inflate: reset\n"));
- return Z_OK;
-}
-
-int ZEXPORT inflatePrime(strm, bits, value)
-z_streamp strm;
-int bits;
-int value;
-{
- struct inflate_state FAR *state;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)strm->state;
- if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
- value &= (1L << bits) - 1;
- state->hold += value << state->bits;
- state->bits += bits;
- return Z_OK;
-}
-
-int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
-z_streamp strm;
-int windowBits;
-const char *version;
-int stream_size;
-{
- struct inflate_state FAR *state;
-
- if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
- stream_size != (int)(sizeof(z_stream)))
- return Z_VERSION_ERROR;
- if (strm == Z_NULL) return Z_STREAM_ERROR;
- strm->msg = Z_NULL; /* in case we return an error */
- if (strm->zalloc == (alloc_func)0) {
- strm->zalloc = zcalloc;
- strm->opaque = (voidpf)0;
- }
- if (strm->zfree == (free_func)0) strm->zfree = zcfree;
- state = (struct inflate_state FAR *)
- ZALLOC(strm, 1, sizeof(struct inflate_state));
- if (state == Z_NULL) return Z_MEM_ERROR;
- Tracev((stderr, "inflate: allocated\n"));
- strm->state = (struct internal_state FAR *)state;
- if (windowBits < 0) {
- state->wrap = 0;
- windowBits = -windowBits;
- }
- else {
- state->wrap = (windowBits >> 4) + 1;
-#ifdef GUNZIP
- if (windowBits < 48) windowBits &= 15;
-#endif
- }
- if (windowBits < 8 || windowBits > 15) {
- ZFREE(strm, state);
- strm->state = Z_NULL;
- return Z_STREAM_ERROR;
- }
- state->wbits = (unsigned)windowBits;
- state->window = Z_NULL;
- return inflateReset(strm);
-}
-
-int ZEXPORT inflateInit_(strm, version, stream_size)
-z_streamp strm;
-const char *version;
-int stream_size;
-{
- return inflateInit2_(strm, DEF_WBITS, version, stream_size);
-}
-
-/*
- Return state with length and distance decoding tables and index sizes set to
- fixed code decoding. Normally this returns fixed tables from inffixed.h.
- If BUILDFIXED is defined, then instead this routine builds the tables the
- first time it's called, and returns those tables the first time and
- thereafter. This reduces the size of the code by about 2K bytes, in
- exchange for a little execution time. However, BUILDFIXED should not be
- used for threaded applications, since the rewriting of the tables and virgin
- may not be thread-safe.
- */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
-#ifdef BUILDFIXED
- static int virgin = 1;
- static code *lenfix, *distfix;
- static code fixed[544];
-
- /* build fixed huffman tables if first call (may not be thread safe) */
- if (virgin) {
- unsigned sym, bits;
- static code *next;
-
- /* literal/length table */
- sym = 0;
- while (sym < 144) state->lens[sym++] = 8;
- while (sym < 256) state->lens[sym++] = 9;
- while (sym < 280) state->lens[sym++] = 7;
- while (sym < 288) state->lens[sym++] = 8;
- next = fixed;
- lenfix = next;
- bits = 9;
- inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
-
- /* distance table */
- sym = 0;
- while (sym < 32) state->lens[sym++] = 5;
- distfix = next;
- bits = 5;
- inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
-
- /* do this just once */
- virgin = 0;
- }
-#else /* !BUILDFIXED */
-# include "inffixed.h"
-#endif /* BUILDFIXED */
- state->lencode = lenfix;
- state->lenbits = 9;
- state->distcode = distfix;
- state->distbits = 5;
-}
-
-#ifdef MAKEFIXED
-#include <stdio.h>
-
-/*
- Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also
- defines BUILDFIXED, so the tables are built on the fly. makefixed() writes
- those tables to stdout, which would be piped to inffixed.h. A small program
- can simply call makefixed to do this:
-
- void makefixed(void);
-
- int main(void)
- {
- makefixed();
- return 0;
- }
-
- Then that can be linked with zlib built with MAKEFIXED defined and run:
-
- a.out > inffixed.h
- */
-void makefixed()
-{
- unsigned low, size;
- struct inflate_state state;
-
- fixedtables(&state);
- puts(" /* inffixed.h -- table for decoding fixed codes");
- puts(" * Generated automatically by makefixed().");
- puts(" */");
- puts("");
- puts(" /* WARNING: this file should *not* be used by applications.");
- puts(" It is part of the implementation of this library and is");
- puts(" subject to change. Applications should only use zlib.h.");
- puts(" */");
- puts("");
- size = 1U << 9;
- printf(" static const code lenfix[%u] = {", size);
- low = 0;
- for (;;) {
- if ((low % 7) == 0) printf("\n ");
- printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits,
- state.lencode[low].val);
- if (++low == size) break;
- putchar(',');
- }
- puts("\n };");
- size = 1U << 5;
- printf("\n static const code distfix[%u] = {", size);
- low = 0;
- for (;;) {
- if ((low % 6) == 0) printf("\n ");
- printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
- state.distcode[low].val);
- if (++low == size) break;
- putchar(',');
- }
- puts("\n };");
-}
-#endif /* MAKEFIXED */
-
-/*
- Update the window with the last wsize (normally 32K) bytes written before
- returning. If window does not exist yet, create it. This is only called
- when a window is already in use, or when output has been written during this
- inflate call, but the end of the deflate stream has not been reached yet.
- It is also called to create a window for dictionary data when a dictionary
- is loaded.
-
- Providing output buffers larger than 32K to inflate() should provide a speed
- advantage, since only the last 32K of output is copied to the sliding window
- upon return from inflate(), and since all distances after the first 32K of
- output will fall in the output data, making match copies simpler and faster.
- The advantage may be dependent on the size of the processor's data caches.
- */
-local int updatewindow(strm, out)
-z_streamp strm;
-unsigned out;
-{
- struct inflate_state FAR *state;
- unsigned copy, dist;
-
- state = (struct inflate_state FAR *)strm->state;
-
- /* if it hasn't been done already, allocate space for the window */
- if (state->window == Z_NULL) {
- state->window = (unsigned char FAR *)
- ZALLOC(strm, 1U << state->wbits,
- sizeof(unsigned char));
- if (state->window == Z_NULL) return 1;
- }
-
- /* if window not in use yet, initialize */
- if (state->wsize == 0) {
- state->wsize = 1U << state->wbits;
- state->write = 0;
- state->whave = 0;
- }
-
- /* copy state->wsize or less output bytes into the circular window */
- copy = out - strm->avail_out;
- if (copy >= state->wsize) {
- zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
- state->write = 0;
- state->whave = state->wsize;
- }
- else {
- dist = state->wsize - state->write;
- if (dist > copy) dist = copy;
- zmemcpy(state->window + state->write, strm->next_out - copy, dist);
- copy -= dist;
- if (copy) {
- zmemcpy(state->window, strm->next_out - copy, copy);
- state->write = copy;
- state->whave = state->wsize;
- }
- else {
- state->write += dist;
- if (state->write == state->wsize) state->write = 0;
- if (state->whave < state->wsize) state->whave += dist;
- }
- }
- return 0;
-}
-
-/* Macros for inflate(): */
-
-/* check function to use adler32() for zlib or crc32() for gzip */
-#ifdef GUNZIP
-# define UPDATE(check, buf, len) \
- (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
-#else
-# define UPDATE(check, buf, len) adler32(check, buf, len)
-#endif
-
-/* check macros for header crc */
-#ifdef GUNZIP
-# define CRC2(check, word) \
- do { \
- hbuf[0] = (unsigned char)(word); \
- hbuf[1] = (unsigned char)((word) >> 8); \
- check = crc32(check, hbuf, 2); \
- } while (0)
-
-# define CRC4(check, word) \
- do { \
- hbuf[0] = (unsigned char)(word); \
- hbuf[1] = (unsigned char)((word) >> 8); \
- hbuf[2] = (unsigned char)((word) >> 16); \
- hbuf[3] = (unsigned char)((word) >> 24); \
- check = crc32(check, hbuf, 4); \
- } while (0)
-#endif
-
-/* Load registers with state in inflate() for speed */
-#define LOAD() \
- do { \
- put = strm->next_out; \
- left = strm->avail_out; \
- next = strm->next_in; \
- have = strm->avail_in; \
- hold = state->hold; \
- bits = state->bits; \
- } while (0)
-
-/* Restore state from registers in inflate() */
-#define RESTORE() \
- do { \
- strm->next_out = put; \
- strm->avail_out = left; \
- strm->next_in = next; \
- strm->avail_in = have; \
- state->hold = hold; \
- state->bits = bits; \
- } while (0)
-
-/* Clear the input bit accumulator */
-#define INITBITS() \
- do { \
- hold = 0; \
- bits = 0; \
- } while (0)
-
-/* Get a byte of input into the bit accumulator, or return from inflate()
- if there is no input available. */
-#define PULLBYTE() \
- do { \
- if (have == 0) goto inf_leave; \
- have--; \
- hold += (unsigned long)(*next++) << bits; \
- bits += 8; \
- } while (0)
-
-/* Assure that there are at least n bits in the bit accumulator. If there is
- not enough available input to do that, then return from inflate(). */
-#define NEEDBITS(n) \
- do { \
- while (bits < (unsigned)(n)) \
- PULLBYTE(); \
- } while (0)
-
-/* Return the low n bits of the bit accumulator (n < 16) */
-#define BITS(n) \
- ((unsigned)hold & ((1U << (n)) - 1))
-
-/* Remove n bits from the bit accumulator */
-#define DROPBITS(n) \
- do { \
- hold >>= (n); \
- bits -= (unsigned)(n); \
- } while (0)
-
-/* Remove zero to seven bits as needed to go to a byte boundary */
-#define BYTEBITS() \
- do { \
- hold >>= bits & 7; \
- bits -= bits & 7; \
- } while (0)
-
-/* Reverse the bytes in a 32-bit value */
-#define REVERSE(q) \
- ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
- (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-
-/*
- inflate() uses a state machine to process as much input data and generate as
- much output data as possible before returning. The state machine is
- structured roughly as follows:
-
- for (;;) switch (state) {
- ...
- case STATEn:
- if (not enough input data or output space to make progress)
- return;
- ... make progress ...
- state = STATEm;
- break;
- ...
- }
-
- so when inflate() is called again, the same case is attempted again, and
- if the appropriate resources are provided, the machine proceeds to the
- next state. The NEEDBITS() macro is usually the way the state evaluates
- whether it can proceed or should return. NEEDBITS() does the return if
- the requested bits are not available. The typical use of the BITS macros
- is:
-
- NEEDBITS(n);
- ... do something with BITS(n) ...
- DROPBITS(n);
-
- where NEEDBITS(n) either returns from inflate() if there isn't enough
- input left to load n bits into the accumulator, or it continues. BITS(n)
- gives the low n bits in the accumulator. When done, DROPBITS(n) drops
- the low n bits off the accumulator. INITBITS() clears the accumulator
- and sets the number of available bits to zero. BYTEBITS() discards just
- enough bits to put the accumulator on a byte boundary. After BYTEBITS()
- and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
-
- NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
- if there is no input available. The decoding of variable length codes uses
- PULLBYTE() directly in order to pull just enough bytes to decode the next
- code, and no more.
-
- Some states loop until they get enough input, making sure that enough
- state information is maintained to continue the loop where it left off
- if NEEDBITS() returns in the loop. For example, want, need, and keep
- would all have to actually be part of the saved state in case NEEDBITS()
- returns:
-
- case STATEw:
- while (want < need) {
- NEEDBITS(n);
- keep[want++] = BITS(n);
- DROPBITS(n);
- }
- state = STATEx;
- case STATEx:
-
- As shown above, if the next state is also the next case, then the break
- is omitted.
-
- A state may also return if there is not enough output space available to
- complete that state. Those states are copying stored data, writing a
- literal byte, and copying a matching string.
-
- When returning, a "goto inf_leave" is used to update the total counters,
- update the check value, and determine whether any progress has been made
- during that inflate() call in order to return the proper return code.
- Progress is defined as a change in either strm->avail_in or strm->avail_out.
- When there is a window, goto inf_leave will update the window with the last
- output written. If a goto inf_leave occurs in the middle of decompression
- and there is no window currently, goto inf_leave will create one and copy
- output to the window for the next call of inflate().
-
- In this implementation, the flush parameter of inflate() only affects the
- return code (per zlib.h). inflate() always writes as much as possible to
- strm->next_out, given the space available and the provided input--the effect
- documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
- the allocation of and copying into a sliding window until necessary, which
- provides the effect documented in zlib.h for Z_FINISH when the entire input
- stream available. So the only thing the flush parameter actually does is:
- when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
- will return Z_BUF_ERROR if it has not reached the end of the stream.
- */
-
-int ZEXPORT inflate(strm, flush)
-z_streamp strm;
-int flush;
-{
- struct inflate_state FAR *state;
- unsigned char FAR *next; /* next input */
- unsigned char FAR *put; /* next output */
- unsigned have, left; /* available input and output */
- unsigned long hold; /* bit buffer */
- unsigned bits; /* bits in bit buffer */
- unsigned in, out; /* save starting available input and output */
- unsigned copy; /* number of stored or match bytes to copy */
- unsigned char FAR *from; /* where to copy match bytes from */
- code this; /* current decoding table entry */
- code last; /* parent table entry */
- unsigned len; /* length to copy for repeats, bits to drop */
- int ret; /* return code */
-#ifdef GUNZIP
- unsigned char hbuf[4]; /* buffer for gzip header crc calculation */
-#endif
- static const unsigned short order[19] = /* permutation of code lengths */
- {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
- if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
- (strm->next_in == Z_NULL && strm->avail_in != 0))
- return Z_STREAM_ERROR;
-
- state = (struct inflate_state FAR *)strm->state;
- if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
- LOAD();
- in = have;
- out = left;
- ret = Z_OK;
- for (;;)
- switch (state->mode) {
- case HEAD:
- if (state->wrap == 0) {
- state->mode = TYPEDO;
- break;
- }
- NEEDBITS(16);
-#ifdef GUNZIP
- if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */
- state->check = crc32(0L, Z_NULL, 0);
- CRC2(state->check, hold);
- INITBITS();
- state->mode = FLAGS;
- break;
- }
- state->flags = 0; /* expect zlib header */
- if (state->head != Z_NULL)
- state->head->done = -1;
- if (!(state->wrap & 1) || /* check if zlib header allowed */
-#else
- if (
-#endif
- ((BITS(8) << 8) + (hold >> 8)) % 31) {
- strm->msg = (char *)"incorrect header check";
- state->mode = BAD;
- break;
- }
- if (BITS(4) != Z_DEFLATED) {
- strm->msg = (char *)"unknown compression method";
- state->mode = BAD;
- break;
- }
- DROPBITS(4);
- len = BITS(4) + 8;
- if (len > state->wbits) {
- strm->msg = (char *)"invalid window size";
- state->mode = BAD;
- break;
- }
- state->dmax = 1U << len;
- Tracev((stderr, "inflate: zlib header ok\n"));
- strm->adler = state->check = adler32(0L, Z_NULL, 0);
- state->mode = hold & 0x200 ? DICTID : TYPE;
- INITBITS();
- break;
-#ifdef GUNZIP
- case FLAGS:
- NEEDBITS(16);
- state->flags = (int)(hold);
- if ((state->flags & 0xff) != Z_DEFLATED) {
- strm->msg = (char *)"unknown compression method";
- state->mode = BAD;
- break;
- }
- if (state->flags & 0xe000) {
- strm->msg = (char *)"unknown header flags set";
- state->mode = BAD;
- break;
- }
- if (state->head != Z_NULL)
- state->head->text = (int)((hold >> 8) & 1);
- if (state->flags & 0x0200) CRC2(state->check, hold);
- INITBITS();
- state->mode = TIME;
- /*FALLTHRU*/
- case TIME:
- NEEDBITS(32);
- if (state->head != Z_NULL)
- state->head->time = hold;
- if (state->flags & 0x0200) CRC4(state->check, hold);
- INITBITS();
- state->mode = OS;
- /*FALLTHRU*/
- case OS:
- NEEDBITS(16);
- if (state->head != Z_NULL) {
- state->head->xflags = (int)(hold & 0xff);
- state->head->os = (int)(hold >> 8);
- }
- if (state->flags & 0x0200) CRC2(state->check, hold);
- INITBITS();
- state->mode = EXLEN;
- /*FALLTHRU*/
- case EXLEN:
- if (state->flags & 0x0400) {
- NEEDBITS(16);
- state->length = (unsigned)(hold);
- if (state->head != Z_NULL)
- state->head->extra_len = (unsigned)hold;
- if (state->flags & 0x0200) CRC2(state->check, hold);
- INITBITS();
- }
- else if (state->head != Z_NULL)
- state->head->extra = Z_NULL;
- state->mode = EXTRA;
- /*FALLTHRU*/
- case EXTRA:
- if (state->flags & 0x0400) {
- copy = state->length;
- if (copy > have) copy = have;
- if (copy) {
- if (state->head != Z_NULL &&
- state->head->extra != Z_NULL) {
- len = state->head->extra_len - state->length;
- zmemcpy(state->head->extra + len, next,
- len + copy > state->head->extra_max ?
- state->head->extra_max - len : copy);
- }
- if (state->flags & 0x0200)
- state->check = crc32(state->check, next, copy);
- have -= copy;
- next += copy;
- state->length -= copy;
- }
- if (state->length) goto inf_leave;
- }
- state->length = 0;
- state->mode = NAME;
- /*FALLTHRU*/
- case NAME:
- if (state->flags & 0x0800) {
- if (have == 0) goto inf_leave;
- copy = 0;
- do {
- len = (unsigned)(next[copy++]);
- if (state->head != Z_NULL &&
- state->head->name != Z_NULL &&
- state->length < state->head->name_max)
- state->head->name[state->length++] = len;
- } while (len && copy < have);
- if (state->flags & 0x0200)
- state->check = crc32(state->check, next, copy);
- have -= copy;
- next += copy;
- if (len) goto inf_leave;
- }
- else if (state->head != Z_NULL)
- state->head->name = Z_NULL;
- state->length = 0;
- state->mode = COMMENT;
- /*FALLTHRU*/
- case COMMENT:
- if (state->flags & 0x1000) {
- if (have == 0) goto inf_leave;
- copy = 0;
- do {
- len = (unsigned)(next[copy++]);
- if (state->head != Z_NULL &&
- state->head->comment != Z_NULL &&
- state->length < state->head->comm_max)
- state->head->comment[state->length++] = len;
- } while (len && copy < have);
- if (state->flags & 0x0200)
- state->check = crc32(state->check, next, copy);
- have -= copy;
- next += copy;
- if (len) goto inf_leave;
- }
- else if (state->head != Z_NULL)
- state->head->comment = Z_NULL;
- state->mode = HCRC;
- /*FALLTHRU*/
- case HCRC:
- if (state->flags & 0x0200) {
- NEEDBITS(16);
- if (hold != (state->check & 0xffff)) {
- strm->msg = (char *)"header crc mismatch";
- state->mode = BAD;
- break;
- }
- INITBITS();
- }
- if (state->head != Z_NULL) {
- state->head->hcrc = (int)((state->flags >> 9) & 1);
- state->head->done = 1;
- }
- strm->adler = state->check = crc32(0L, Z_NULL, 0);
- state->mode = TYPE;
- break;
-#endif
- case DICTID:
- NEEDBITS(32);
- strm->adler = state->check = REVERSE(hold);
- INITBITS();
- state->mode = DICT;
- /*FALLTHRU*/
- case DICT:
- if (state->havedict == 0) {
- RESTORE();
- return Z_NEED_DICT;
- }
- strm->adler = state->check = adler32(0L, Z_NULL, 0);
- state->mode = TYPE;
- /*FALLTHRU*/
- case TYPE:
- if (flush == Z_BLOCK) goto inf_leave;
- /*FALLTHRU*/
- case TYPEDO:
- if (state->last) {
- BYTEBITS();
- state->mode = CHECK;
- break;
- }
- NEEDBITS(3);
- state->last = BITS(1);
- DROPBITS(1);
- switch (BITS(2)) {
- case 0: /* stored block */
- Tracev((stderr, "inflate: stored block%s\n",
- state->last ? " (last)" : ""));
- state->mode = STORED;
- break;
- case 1: /* fixed block */
- fixedtables(state);
- Tracev((stderr, "inflate: fixed codes block%s\n",
- state->last ? " (last)" : ""));
- state->mode = LEN; /* decode codes */
- break;
- case 2: /* dynamic block */
- Tracev((stderr, "inflate: dynamic codes block%s\n",
- state->last ? " (last)" : ""));
- state->mode = TABLE;
- break;
- case 3:
- strm->msg = (char *)"invalid block type";
- state->mode = BAD;
- }
- DROPBITS(2);
- break;
- case STORED:
- BYTEBITS(); /* go to byte boundary */
- NEEDBITS(32);
- if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
- strm->msg = (char *)"invalid stored block lengths";
- state->mode = BAD;
- break;
- }
- state->length = (unsigned)hold & 0xffff;
- Tracev((stderr, "inflate: stored length %u\n",
- state->length));
- INITBITS();
- state->mode = COPY;
- /*FALLTHRU*/
- case COPY:
- copy = state->length;
- if (copy) {
- if (copy > have) copy = have;
- if (copy > left) copy = left;
- if (copy == 0) goto inf_leave;
- zmemcpy(put, next, copy);
- have -= copy;
- next += copy;
- left -= copy;
- put += copy;
- state->length -= copy;
- break;
- }
- Tracev((stderr, "inflate: stored end\n"));
- state->mode = TYPE;
- break;
- case TABLE:
- NEEDBITS(14);
- state->nlen = BITS(5) + 257;
- DROPBITS(5);
- state->ndist = BITS(5) + 1;
- DROPBITS(5);
- state->ncode = BITS(4) + 4;
- DROPBITS(4);
-#ifndef PKZIP_BUG_WORKAROUND
- if (state->nlen > 286 || state->ndist > 30) {
- strm->msg = (char *)"too many length or distance symbols";
- state->mode = BAD;
- break;
- }
-#endif
- Tracev((stderr, "inflate: table sizes ok\n"));
- state->have = 0;
- state->mode = LENLENS;
- /*FALLTHRU*/
- case LENLENS:
- while (state->have < state->ncode) {
- NEEDBITS(3);
- state->lens[order[state->have++]] = (unsigned short)BITS(3);
- DROPBITS(3);
- }
- while (state->have < 19)
- state->lens[order[state->have++]] = 0;
- state->next = state->codes;
- state->lencode = (code const FAR *)(state->next);
- state->lenbits = 7;
- ret = inflate_table(CODES, state->lens, 19, &(state->next),
- &(state->lenbits), state->work);
- if (ret) {
- strm->msg = (char *)"invalid code lengths set";
- state->mode = BAD;
- break;
- }
- Tracev((stderr, "inflate: code lengths ok\n"));
- state->have = 0;
- state->mode = CODELENS;
- /*FALLTHRU*/
- case CODELENS:
- while (state->have < state->nlen + state->ndist) {
- for (;;) {
- this = state->lencode[BITS(state->lenbits)];
- if ((unsigned)(this.bits) <= bits) break;
- PULLBYTE();
- }
- if (this.val < 16) {
- NEEDBITS(this.bits);
- DROPBITS(this.bits);
- state->lens[state->have++] = this.val;
- }
- else {
- if (this.val == 16) {
- NEEDBITS(this.bits + 2);
- DROPBITS(this.bits);
- if (state->have == 0) {
- strm->msg = (char *)"invalid bit length repeat";
- state->mode = BAD;
- break;
- }
- len = state->lens[state->have - 1];
- copy = 3 + BITS(2);
- DROPBITS(2);
- }
- else if (this.val == 17) {
- NEEDBITS(this.bits + 3);
- DROPBITS(this.bits);
- len = 0;
- copy = 3 + BITS(3);
- DROPBITS(3);
- }
- else {
- NEEDBITS(this.bits + 7);
- DROPBITS(this.bits);
- len = 0;
- copy = 11 + BITS(7);
- DROPBITS(7);
- }
- if (state->have + copy > state->nlen + state->ndist) {
- strm->msg = (char *)"invalid bit length repeat";
- state->mode = BAD;
- break;
- }
- while (copy--)
- state->lens[state->have++] = (unsigned short)len;
- }
- }
-
- /* handle error breaks in while */
- if (state->mode == BAD) break;
-
- /* build code tables */
- state->next = state->codes;
- state->lencode = (code const FAR *)(state->next);
- state->lenbits = 9;
- ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
- &(state->lenbits), state->work);
- if (ret) {
- strm->msg = (char *)"invalid literal/lengths set";
- state->mode = BAD;
- break;
- }
- state->distcode = (code const FAR *)(state->next);
- state->distbits = 6;
- ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
- &(state->next), &(state->distbits), state->work);
- if (ret) {
- strm->msg = (char *)"invalid distances set";
- state->mode = BAD;
- break;
- }
- Tracev((stderr, "inflate: codes ok\n"));
- state->mode = LEN;
- /*FALLTHRU*/
- case LEN:
- if (have >= 6 && left >= 258) {
- RESTORE();
- inflate_fast(strm, out);
- LOAD();
- break;
- }
- for (;;) {
- this = state->lencode[BITS(state->lenbits)];
- if ((unsigned)(this.bits) <= bits) break;
- PULLBYTE();
- }
- if (this.op && (this.op & 0xf0) == 0) {
- last = this;
- for (;;) {
- this = state->lencode[last.val +
- (BITS(last.bits + last.op) >> last.bits)];
- if ((unsigned)(last.bits + this.bits) <= bits) break;
- PULLBYTE();
- }
- DROPBITS(last.bits);
- }
- DROPBITS(this.bits);
- state->length = (unsigned)this.val;
- if ((int)(this.op) == 0) {
- Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", this.val));
- state->mode = LIT;
- break;
- }
- if (this.op & 32) {
- Tracevv((stderr, "inflate: end of block\n"));
- state->mode = TYPE;
- break;
- }
- if (this.op & 64) {
- strm->msg = (char *)"invalid literal/length code";
- state->mode = BAD;
- break;
- }
- state->extra = (unsigned)(this.op) & 15;
- state->mode = LENEXT;
- /*FALLTHRU*/
- case LENEXT:
- if (state->extra) {
- NEEDBITS(state->extra);
- state->length += BITS(state->extra);
- DROPBITS(state->extra);
- }
- Tracevv((stderr, "inflate: length %u\n", state->length));
- state->mode = DIST;
- /*FALLTHRU*/
- case DIST:
- for (;;) {
- this = state->distcode[BITS(state->distbits)];
- if ((unsigned)(this.bits) <= bits) break;
- PULLBYTE();
- }
- if ((this.op & 0xf0) == 0) {
- last = this;
- for (;;) {
- this = state->distcode[last.val +
- (BITS(last.bits + last.op) >> last.bits)];
- if ((unsigned)(last.bits + this.bits) <= bits) break;
- PULLBYTE();
- }
- DROPBITS(last.bits);
- }
- DROPBITS(this.bits);
- if (this.op & 64) {
- strm->msg = (char *)"invalid distance code";
- state->mode = BAD;
- break;
- }
- state->offset = (unsigned)this.val;
- state->extra = (unsigned)(this.op) & 15;
- state->mode = DISTEXT;
- /*FALLTHRU*/
- case DISTEXT:
- if (state->extra) {
- NEEDBITS(state->extra);
- state->offset += BITS(state->extra);
- DROPBITS(state->extra);
- }
-#ifdef INFLATE_STRICT
- if (state->offset > state->dmax) {
- strm->msg = (char *)"invalid distance too far back";
- state->mode = BAD;
- break;
- }
-#endif
- if (state->offset > state->whave + out - left) {
- strm->msg = (char *)"invalid distance too far back";
- state->mode = BAD;
- break;
- }
- Tracevv((stderr, "inflate: distance %u\n", state->offset));
- state->mode = MATCH;
- /*FALLTHRU*/
- case MATCH:
- if (left == 0) goto inf_leave;
- copy = out - left;
- if (state->offset > copy) { /* copy from window */
- copy = state->offset - copy;
- if (copy > state->write) {
- copy -= state->write;
- from = state->window + (state->wsize - copy);
- }
- else
- from = state->window + (state->write - copy);
- if (copy > state->length) copy = state->length;
- }
- else { /* copy from output */
- from = put - state->offset;
- copy = state->length;
- }
- if (copy > left) copy = left;
- left -= copy;
- state->length -= copy;
- do {
- *put++ = *from++;
- } while (--copy);
- if (state->length == 0) state->mode = LEN;
- break;
- case LIT:
- if (left == 0) goto inf_leave;
- *put++ = (unsigned char)(state->length);
- left--;
- state->mode = LEN;
- break;
- case CHECK:
- if (state->wrap) {
- NEEDBITS(32);
- out -= left;
- strm->total_out += out;
- state->total += out;
- if (out)
- strm->adler = state->check =
- UPDATE(state->check, put - out, out);
- out = left;
- if ((
-#ifdef GUNZIP
- state->flags ? hold :
-#endif
- REVERSE(hold)) != state->check) {
- strm->msg = (char *)"incorrect data check";
- state->mode = BAD;
- break;
- }
- INITBITS();
- Tracev((stderr, "inflate: check matches trailer\n"));
- }
-#ifdef GUNZIP
- state->mode = LENGTH;
- /*FALLTHRU*/
- case LENGTH:
- if (state->wrap && state->flags) {
- NEEDBITS(32);
- if (hold != (state->total & 0xffffffffUL)) {
- strm->msg = (char *)"incorrect length check";
- state->mode = BAD;
- break;
- }
- INITBITS();
- Tracev((stderr, "inflate: length matches trailer\n"));
- }
-#endif
- state->mode = DONE;
- /*FALLTHRU*/
- case DONE:
- ret = Z_STREAM_END;
- goto inf_leave;
- case BAD:
- ret = Z_DATA_ERROR;
- goto inf_leave;
- case MEM:
- return Z_MEM_ERROR;
- case SYNC:
- default:
- return Z_STREAM_ERROR;
- }
-
- /*
- Return from inflate(), updating the total counts and the check value.
- If there was no progress during the inflate() call, return a buffer
- error. Call updatewindow() to create and/or update the window state.
- Note: a memory error from inflate() is non-recoverable.
- */
- inf_leave:
- RESTORE();
- if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
- if (updatewindow(strm, out)) {
- state->mode = MEM;
- return Z_MEM_ERROR;
- }
- in -= strm->avail_in;
- out -= strm->avail_out;
- strm->total_in += in;
- strm->total_out += out;
- state->total += out;
- if (state->wrap && out)
- strm->adler = state->check =
- UPDATE(state->check, strm->next_out - out, out);
- strm->data_type = state->bits + (state->last ? 64 : 0) +
- (state->mode == TYPE ? 128 : 0);
- if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
- ret = Z_BUF_ERROR;
- return ret;
-}
-
-int ZEXPORT inflateEnd(strm)
-z_streamp strm;
-{
- struct inflate_state FAR *state;
- if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
- return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)strm->state;
- if (state->window != Z_NULL) ZFREE(strm, state->window);
- ZFREE(strm, strm->state);
- strm->state = Z_NULL;
- Tracev((stderr, "inflate: end\n"));
- return Z_OK;
-}
-
-int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
-z_streamp strm;
-const Bytef *dictionary;
-uInt dictLength;
-{
- struct inflate_state FAR *state;
- unsigned long id;
-
- /* check state */
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)strm->state;
- if (state->wrap != 0 && state->mode != DICT)
- return Z_STREAM_ERROR;
-
- /* check for correct dictionary id */
- if (state->mode == DICT) {
- id = adler32(0L, Z_NULL, 0);
- id = adler32(id, dictionary, dictLength);
- if (id != state->check)
- return Z_DATA_ERROR;
- }
-
- /* copy dictionary to window */
- if (updatewindow(strm, strm->avail_out)) {
- state->mode = MEM;
- return Z_MEM_ERROR;
- }
- if (dictLength > state->wsize) {
- zmemcpy(state->window, dictionary + dictLength - state->wsize,
- state->wsize);
- state->whave = state->wsize;
- }
- else {
- zmemcpy(state->window + state->wsize - dictLength, dictionary,
- dictLength);
- state->whave = dictLength;
- }
- state->havedict = 1;
- Tracev((stderr, "inflate: dictionary set\n"));
- return Z_OK;
-}
-
-int ZEXPORT inflateGetHeader(strm, head)
-z_streamp strm;
-gz_headerp head;
-{
- struct inflate_state FAR *state;
-
- /* check state */
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)strm->state;
- if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
-
- /* save header structure */
- state->head = head;
- head->done = 0;
- return Z_OK;
-}
-
-/*
- Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
- or when out of input. When called, *have is the number of pattern bytes
- found in order so far, in 0..3. On return *have is updated to the new
- state. If on return *have equals four, then the pattern was found and the
- return value is how many bytes were read including the last byte of the
- pattern. If *have is less than four, then the pattern has not been found
- yet and the return value is len. In the latter case, syncsearch() can be
- called again with more data and the *have state. *have is initialized to
- zero for the first call.
- */
-local unsigned syncsearch(have, buf, len)
-unsigned FAR *have;
-unsigned char FAR *buf;
-unsigned len;
-{
- unsigned got;
- unsigned next;
-
- got = *have;
- next = 0;
- while (next < len && got < 4) {
- if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
- got++;
- else if (buf[next])
- got = 0;
- else
- got = 4 - got;
- next++;
- }
- *have = got;
- return next;
-}
-
-int ZEXPORT inflateSync(strm)
-z_streamp strm;
-{
- unsigned len; /* number of bytes to look at or looked at */
- unsigned long in, out; /* temporary to save total_in and total_out */
- unsigned char buf[4]; /* to restore bit buffer to byte string */
- struct inflate_state FAR *state;
-
- /* check parameters */
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)strm->state;
- if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
-
- /* if first time, start search in bit buffer */
- if (state->mode != SYNC) {
- state->mode = SYNC;
- state->hold <<= state->bits & 7;
- state->bits -= state->bits & 7;
- len = 0;
- while (state->bits >= 8) {
- buf[len++] = (unsigned char)(state->hold);
- state->hold >>= 8;
- state->bits -= 8;
- }
- state->have = 0;
- (void) syncsearch(&(state->have), buf, len);
- }
-
- /* search available input */
- len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
- strm->avail_in -= len;
- strm->next_in += len;
- strm->total_in += len;
-
- /* return no joy or set up to restart inflate() on a new block */
- if (state->have != 4) return Z_DATA_ERROR;
- in = strm->total_in; out = strm->total_out;
- (void) inflateReset(strm);
- strm->total_in = in; strm->total_out = out;
- state->mode = TYPE;
- return Z_OK;
-}
-
-/*
- Returns true if inflate is currently at the end of a block generated by
- Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
- implementation to provide an additional safety check. PPP uses
- Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
- block. When decompressing, PPP checks that at the end of input packet,
- inflate is waiting for these length bytes.
- */
-int ZEXPORT inflateSyncPoint(strm)
-z_streamp strm;
-{
- struct inflate_state FAR *state;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)strm->state;
- return state->mode == STORED && state->bits == 0;
-}
-
-int ZEXPORT inflateCopy(dest, source)
-z_streamp dest;
-z_streamp source;
-{
- struct inflate_state FAR *state;
- struct inflate_state FAR *copy;
- unsigned char FAR *window;
- unsigned wsize;
-
- /* check input */
- if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
- source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
- return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)source->state;
-
- /* allocate space */
- copy = (struct inflate_state FAR *)
- ZALLOC(source, 1, sizeof(struct inflate_state));
- if (copy == Z_NULL) return Z_MEM_ERROR;
- window = Z_NULL;
- if (state->window != Z_NULL) {
- window = (unsigned char FAR *)
- ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
- if (window == Z_NULL) {
- ZFREE(source, copy);
- return Z_MEM_ERROR;
- }
- }
-
- /* copy state */
- zmemcpy(dest, source, sizeof(z_stream));
- zmemcpy(copy, state, sizeof(struct inflate_state));
- if (state->lencode >= state->codes &&
- state->lencode <= state->codes + ENOUGH - 1) {
- copy->lencode = copy->codes + (state->lencode - state->codes);
- copy->distcode = copy->codes + (state->distcode - state->codes);
- }
- copy->next = copy->codes + (state->next - state->codes);
- if (window != Z_NULL) {
- wsize = 1U << state->wbits;
- zmemcpy(window, state->window, wsize);
- }
- copy->window = window;
- dest->state = (struct internal_state FAR *)copy;
- return Z_OK;
-}
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h
@@ -1,57 +0,0 @@
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* Structure for decoding tables. Each entry provides either the
- information needed to do the operation requested by the code that
- indexed that table entry, or it provides a pointer to another
- table that indexes more bits of the code. op indicates whether
- the entry is a pointer to another table, a literal, a length or
- distance, an end-of-block, or an invalid code. For a table
- pointer, the low four bits of op is the number of index bits of
- that table. For a length or distance, the low four bits of op
- is the number of extra bits to get after the code. bits is
- the number of bits in this code or part of the code to drop off
- of the bit buffer. val is the actual byte to output in the case
- of a literal, the base length or distance, or the offset from
- the current table to the next table. Each entry is four bytes. */
-typedef struct {
- unsigned char op; /* operation, extra bits, table bits */
- unsigned char bits; /* bits in this part of the code */
- unsigned short val; /* offset in table or code value */
-} code;
-
-/* op values as set by inflate_table():
- 00000000 - literal
- 0000tttt - table link, tttt != 0 is the number of table index bits
- 0001eeee - length or distance, eeee is the number of extra bits
- 01100000 - end of block
- 01000000 - invalid code
- */
-
-/* Maximum size of dynamic tree. The maximum found in a long but non-
- exhaustive search was 1444 code structures (852 for length/literals
- and 592 for distances, the latter actually the result of an
- exhaustive search). The true maximum is not known, but the value
- below is more than safe. */
-#define ENOUGH 2048
-#define MAXD 592
-
-/* Type of code to build for inftable() */
-typedef enum {
- CODES,
- LENS,
- DISTS
-} codetype;
-
-extern int inflate_table OF((codetype type, unsigned short FAR *lens,
- unsigned codes, code FAR * FAR *table,
- unsigned FAR *bits, unsigned short FAR *work));
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c
@@ -1,331 +0,0 @@
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#include "zutil.h"
-#include "inftrees.h"
-
-#define MAXBITS 15
-
-static const char inflate_copyright[] =
- " inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
-/*
- Build a set of tables to decode the provided canonical Huffman code.
- The code lengths are lens[0..codes-1]. The result starts at *table,
- whose indices are 0..2^bits-1. work is a writable array of at least
- lens shorts, which is used as a work area. type is the type of code
- to be generated, CODES, LENS, or DISTS. On return, zero is success,
- -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
- on return points to the next available entry's address. bits is the
- requested root table index bits, and on return it is the actual root
- table index bits. It will differ if the request is greater than the
- longest code or if it is less than the shortest code.
- */
-int inflate_table(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
-{
- unsigned len; /* a code's length in bits */
- unsigned sym; /* index of code symbols */
- unsigned min, max; /* minimum and maximum code lengths */
- unsigned root; /* number of index bits for root table */
- unsigned curr; /* number of index bits for current table */
- unsigned drop; /* code bits to drop for sub-table */
- int left; /* number of prefix codes available */
- unsigned used; /* code entries in table used */
- unsigned huff; /* Huffman code */
- unsigned incr; /* for incrementing code, index */
- unsigned fill; /* index for replicating entries */
- unsigned low; /* low bits for current root entry */
- unsigned mask; /* mask for low root bits */
- code this; /* table entry for duplication */
- code FAR *next; /* next available space in table */
- const unsigned short FAR *base; /* base value table to use */
- const unsigned short FAR *extra; /* extra bits table to use */
- int end; /* use base and extra for symbol > end */
- unsigned short count[MAXBITS+1]; /* number of codes of each length */
- unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
- static const unsigned short lbase[31] = { /* Length codes 257..285 base */
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- static const unsigned short lext[31] = { /* Length codes 257..285 extra */
- 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
- 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
- static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577, 0, 0};
- static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
- 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
- 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
- 28, 28, 29, 29, 64, 64};
-
- /*
- Process a set of code lengths to create a canonical Huffman code. The
- code lengths are lens[0..codes-1]. Each length corresponds to the
- symbols 0..codes-1. The Huffman code is generated by first sorting the
- symbols by length from short to long, and retaining the symbol order
- for codes with equal lengths. Then the code starts with all zero bits
- for the first code of the shortest length, and the codes are integer
- increments for the same length, and zeros are appended as the length
- increases. For the deflate format, these bits are stored backwards
- from their more natural integer increment ordering, and so when the
- decoding tables are built in the large loop below, the integer codes
- are incremented backwards.
-
- This routine assumes, but does not check, that all of the entries in
- lens[] are in the range 0..MAXBITS. The caller must assure this.
- 1..MAXBITS is interpreted as that code length. zero means that that
- symbol does not occur in this code.
-
- The codes are sorted by computing a count of codes for each length,
- creating from that a table of starting indices for each length in the
- sorted table, and then entering the symbols in order in the sorted
- table. The sorted table is work[], with that space being provided by
- the caller.
-
- The length counts are used for other purposes as well, i.e. finding
- the minimum and maximum length codes, determining if there are any
- codes at all, checking for a valid set of lengths, and looking ahead
- at length counts to determine sub-table sizes when building the
- decoding tables.
- */
-
- /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
- for (len = 0; len <= MAXBITS; len++)
- count[len] = 0;
- for (sym = 0; sym < codes; sym++)
- count[lens[sym]]++;
-
- /* bound code lengths, force root to be within code lengths */
- root = *bits;
- for (max = MAXBITS; max >= 1; max--)
- if (count[max] != 0) break;
- if (root > max) root = max;
- if (max == 0) { /* no symbols to code at all */
- this.op = (unsigned char)64; /* invalid code marker */
- this.bits = (unsigned char)1;
- this.val = (unsigned short)0;
- *(*table)++ = this; /* make a table to force an error */
- *(*table)++ = this;
- *bits = 1;
- return 0; /* no symbols, but wait for decoding to report error */
- }
- for (min = 1; min <= MAXBITS; min++)
- if (count[min] != 0) break;
- if (root < min) root = min;
-
- /* check for an over-subscribed or incomplete set of lengths */
- left = 1;
- for (len = 1; len <= MAXBITS; len++) {
- left <<= 1;
- left -= count[len];
- if (left < 0) return -1; /* over-subscribed */
- }
- if (left > 0 && (type == CODES || max != 1))
- return -1; /* incomplete set */
-
- /* generate offsets into symbol table for each length for sorting */
- offs[1] = 0;
- for (len = 1; len < MAXBITS; len++)
- offs[len + 1] = offs[len] + count[len];
-
- /* sort symbols by length, by symbol order within each length */
- for (sym = 0; sym < codes; sym++)
- if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
-
- /*
- Create and fill in decoding tables. In this loop, the table being
- filled is at next and has curr index bits. The code being used is huff
- with length len. That code is converted to an index by dropping drop
- bits off of the bottom. For codes where len is less than drop + curr,
- those top drop + curr - len bits are incremented through all values to
- fill the table with replicated entries.
-
- root is the number of index bits for the root table. When len exceeds
- root, sub-tables are created pointed to by the root entry with an index
- of the low root bits of huff. This is saved in low to check for when a
- new sub-table should be started. drop is zero when the root table is
- being filled, and drop is root when sub-tables are being filled.
-
- When a new sub-table is needed, it is necessary to look ahead in the
- code lengths to determine what size sub-table is needed. The length
- counts are used for this, and so count[] is decremented as codes are
- entered in the tables.
-
- used keeps track of how many table entries have been allocated from the
- provided *table space. It is checked when a LENS table is being made
- against the space in *table, ENOUGH, minus the maximum space needed by
- the worst case distance code, MAXD. This should never happen, but the
- sufficiency of ENOUGH has not been proven exhaustively, hence the check.
- This assumes that when type == LENS, bits == 9.
-
- sym increments through all symbols, and the loop terminates when
- all codes of length max, i.e. all codes, have been processed. This
- routine permits incomplete codes, so another loop after this one fills
- in the rest of the decoding tables with invalid code markers.
- */
-
- /* set up for code type */
- switch (type) {
- case CODES:
- base = extra = work; /* dummy value--not used */
- end = 19;
- break;
- case LENS:
- base = lbase;
- base -= 257;
- extra = lext;
- extra -= 257;
- end = 256;
- break;
- default: /* DISTS */
- base = dbase;
- extra = dext;
- end = -1;
- }
-
- /* initialize state for loop */
- huff = 0; /* starting code */
- sym = 0; /* starting code symbol */
- len = min; /* starting code length */
- next = *table; /* current table to fill in */
- curr = root; /* current table index bits */
- drop = 0; /* current bits to drop from code for index */
- low = (unsigned)(-1); /* trigger new sub-table when len > root */
- used = 1U << root; /* use root table entries */
- mask = used - 1; /* mask for comparing low */
-
- /* check available table space */
- if (type == LENS && used >= ENOUGH - MAXD)
- return 1;
-
- /* process all codes and make table entries */
- for (;;) {
- /* create table entry */
- this.bits = (unsigned char)(len - drop);
- if ((int)(work[sym]) < end) {
- this.op = (unsigned char)0;
- this.val = work[sym];
- }
- else if ((int)(work[sym]) > end) {
- this.op = (unsigned char)(extra[work[sym]]);
- this.val = base[work[sym]];
- }
- else {
- this.op = (unsigned char)(32 + 64); /* end of block */
- this.val = 0;
- }
-
- /* replicate for those indices with low len bits equal to huff */
- incr = 1U << (len - drop);
- fill = 1U << curr;
- min = fill; /* save offset to next table */
- do {
- fill -= incr;
- next[(huff >> drop) + fill] = this;
- } while (fill != 0);
-
- /* backwards increment the len-bit code huff */
- incr = 1U << (len - 1);
- while (huff & incr)
- incr >>= 1;
- if (incr != 0) {
- huff &= incr - 1;
- huff += incr;
- }
- else
- huff = 0;
-
- /* go to next symbol, update count, len */
- sym++;
- if (--(count[len]) == 0) {
- if (len == max) break;
- len = lens[work[sym]];
- }
-
- /* create new sub-table if needed */
- if (len > root && (huff & mask) != low) {
- /* if first time, transition to sub-tables */
- if (drop == 0)
- drop = root;
-
- /* increment past last table */
- next += min; /* here min is 1 << curr */
-
- /* determine length of next table */
- curr = len - drop;
- left = (int)(1 << curr);
- while (curr + drop < max) {
- left -= count[curr + drop];
- if (left <= 0) break;
- curr++;
- left <<= 1;
- }
-
- /* check for enough space */
- used += 1U << curr;
- if (type == LENS && used >= ENOUGH - MAXD)
- return 1;
-
- /* point entry in root table to sub-table */
- low = huff & mask;
- (*table)[low].op = (unsigned char)curr;
- (*table)[low].bits = (unsigned char)root;
- (*table)[low].val = (unsigned short)(next - *table);
- }
- }
-
- /*
- Fill in rest of table for incomplete codes. This loop is similar to the
- loop above in incrementing huff for table indices. It is assumed that
- len is equal to curr + drop, so there is no loop needed to increment
- through high index bits. When the current sub-table is filled, the loop
- drops back to the root table to fill in any remaining entries there.
- */
- this.op = (unsigned char)64; /* invalid code marker */
- this.bits = (unsigned char)(len - drop);
- this.val = (unsigned short)0;
- while (huff != 0) {
- /* when done with sub-table, drop back to root table */
- if (drop != 0 && (huff & mask) != low) {
- drop = 0;
- len = root;
- next = *table;
- this.bits = (unsigned char)len;
- }
-
- /* put invalid code marker in table */
- next[huff >> drop] = this;
-
- /* backwards increment the len-bit code huff */
- incr = 1U << (len - 1);
- while (huff & incr)
- incr >>= 1;
- if (incr != 0) {
- huff &= incr - 1;
- huff += incr;
- }
- else
- huff = 0;
- }
-
- /* set return parameters */
- *table += used;
- *bits = root;
- return 0;
-}
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c
@@ -1,428 +0,0 @@
-/*
- * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
- * Use is subject to license terms.
- */
-
-/* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- *
- * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
- * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
- * tables for updating the shift register in one step with three exclusive-ors
- * instead of four steps with four exclusive-ors. This results in about a
- * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-/*
- Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
- protection on the static variables used to control the first-use generation
- of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
- first call get_crc_table() to initialize the tables before allowing more than
- one thread to use crc32().
- */
-
-#ifdef MAKECRCH
-# include <stdio.h>
-# ifndef DYNAMIC_CRC_TABLE
-# define DYNAMIC_CRC_TABLE
-# endif /* !DYNAMIC_CRC_TABLE */
-#endif /* MAKECRCH */
-
-#include "zutil.h" /* for STDC and FAR definitions */
-
-#define local static
-
-/* Find a four-byte integer type for crc32_little() and crc32_big(). */
-#ifndef NOBYFOUR
-# ifdef STDC /* need ANSI C limits.h to determine sizes */
-# include <limits.h>
-# define BYFOUR
-# if (UINT_MAX == 0xffffffffUL)
- typedef unsigned int u4;
-# else
-# if (ULONG_MAX == 0xffffffffUL)
- typedef unsigned long u4;
-# else
-# if (USHRT_MAX == 0xffffffffUL)
- typedef unsigned short u4;
-# else
-# undef BYFOUR /* can't find a four-byte integer type! */
-# endif
-# endif
-# endif
-# endif /* STDC */
-#endif /* !NOBYFOUR */
-
-/* Definitions for doing the crc four data bytes at a time. */
-#ifdef BYFOUR
-# define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \
- (((w)&0xff00)<<8)+(((w)&0xff)<<24))
- local unsigned long crc32_little OF((unsigned long,
- const unsigned char FAR *, unsigned));
- local unsigned long crc32_big OF((unsigned long,
- const unsigned char FAR *, unsigned));
-# define TBLS 8
-#else
-# define TBLS 1
-#endif /* BYFOUR */
-
-/* Local functions for crc concatenation */
-local unsigned long gf2_matrix_times OF((unsigned long *mat,
- unsigned long vec));
-local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
-
-#ifdef DYNAMIC_CRC_TABLE
-
-local volatile int crc_table_empty = 1;
-local unsigned long FAR crc_table[TBLS][256];
-local void make_crc_table OF((void));
-#ifdef MAKECRCH
- local void write_table OF((FILE *, const unsigned long FAR *));
-#endif /* MAKECRCH */
-/*
- Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
- x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
-
- Polynomials over GF(2) are represented in binary, one bit per coefficient,
- with the lowest powers in the most significant bit. Then adding polynomials
- is just exclusive-or, and multiplying a polynomial by x is a right shift by
- one. If we call the above polynomial p, and represent a byte as the
- polynomial q, also with the lowest power in the most significant bit (so the
- byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
- where a mod b means the remainder after dividing a by b.
-
- This calculation is done using the shift-register method of multiplying and
- taking the remainder. The register is initialized to zero, and for each
- incoming bit, x^32 is added mod p to the register if the bit is a one (where
- x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
- x (which is shifting right by one and adding x^32 mod p if the bit shifted
- out is a one). We start with the highest power (least significant bit) of
- q and repeat for all eight bits of q.
-
- The first table is simply the CRC of all possible eight bit values. This is
- all the information needed to generate CRCs on data a byte at a time for all
- combinations of CRC register values and incoming bytes. The remaining tables
- allow for word-at-a-time CRC calculation for both big-endian and little-
- endian machines, where a word is four bytes.
-*/
-local void make_crc_table()
-{
- unsigned long c;
- int n, k;
- unsigned long poly; /* polynomial exclusive-or pattern */
- /* terms of polynomial defining this crc (except x^32): */
- static volatile int first = 1; /* flag to limit concurrent making */
- static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
-
- /* See if another task is already doing this (not thread-safe, but better
- than nothing -- significantly reduces duration of vulnerability in
- case the advice about DYNAMIC_CRC_TABLE is ignored) */
- if (first) {
- first = 0;
-
- /* make exclusive-or pattern from polynomial (0xedb88320UL) */
- poly = 0UL;
- for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
- poly |= 1UL << (31 - p[n]);
-
- /* generate a crc for every 8-bit value */
- for (n = 0; n < 256; n++) {
- c = (unsigned long)n;
- for (k = 0; k < 8; k++)
- c = c & 1 ? poly ^ (c >> 1) : c >> 1;
- crc_table[0][n] = c;
- }
-
-#ifdef BYFOUR
- /* generate crc for each value followed by one, two, and three zeros,
- and then the byte reversal of those as well as the first table */
- for (n = 0; n < 256; n++) {
- c = crc_table[0][n];
- crc_table[4][n] = REV(c);
- for (k = 1; k < 4; k++) {
- c = crc_table[0][c & 0xff] ^ (c >> 8);
- crc_table[k][n] = c;
- crc_table[k + 4][n] = REV(c);
- }
- }
-#endif /* BYFOUR */
-
- crc_table_empty = 0;
- }
- else { /* not first */
- /* wait for the other guy to finish (not efficient, but rare) */
- while (crc_table_empty)
- ;
- }
-
-#ifdef MAKECRCH
- /* write out CRC tables to crc32.h */
- {
- FILE *out;
-
- out = fopen("crc32.h", "w");
- if (out == NULL) return;
- fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
- fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
- fprintf(out, "local const unsigned long FAR ");
- fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
- write_table(out, crc_table[0]);
-# ifdef BYFOUR
- fprintf(out, "#ifdef BYFOUR\n");
- for (k = 1; k < 8; k++) {
- fprintf(out, " },\n {\n");
- write_table(out, crc_table[k]);
- }
- fprintf(out, "#endif\n");
-# endif /* BYFOUR */
- fprintf(out, " }\n};\n");
- fclose(out);
- }
-#endif /* MAKECRCH */
-}
-
-#ifdef MAKECRCH
-local void write_table(out, table)
- FILE *out;
- const unsigned long FAR *table;
-{
- int n;
-
- for (n = 0; n < 256; n++)
- fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n],
- n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
-}
-#endif /* MAKECRCH */
-
-#else /* !DYNAMIC_CRC_TABLE */
-/* ========================================================================
- * Tables of CRC-32s of all single-byte values, made by make_crc_table().
- */
-#include "crc32.h"
-#endif /* DYNAMIC_CRC_TABLE */
-
-/* =========================================================================
- * This function can be used by asm versions of crc32()
- */
-const unsigned long FAR * ZEXPORT get_crc_table()
-{
-#ifdef DYNAMIC_CRC_TABLE
- if (crc_table_empty)
- make_crc_table();
-#endif /* DYNAMIC_CRC_TABLE */
- return (const unsigned long FAR *)crc_table;
-}
-
-/* ========================================================================= */
-#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
-#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
-
-/* ========================================================================= */
-unsigned long ZEXPORT crc32(crc, buf, len)
- unsigned long crc;
- const unsigned char FAR *buf;
- unsigned len;
-{
- if (buf == Z_NULL) return 0UL;
-
-#ifdef DYNAMIC_CRC_TABLE
- if (crc_table_empty)
- make_crc_table();
-#endif /* DYNAMIC_CRC_TABLE */
-
-#ifdef BYFOUR
- if (sizeof(void *) == sizeof(ptrdiff_t)) {
- u4 endian;
-
- endian = 1;
- if (*((unsigned char *)(&endian)))
- return crc32_little(crc, buf, len);
- else
- return crc32_big(crc, buf, len);
- }
-#endif /* BYFOUR */
- crc = crc ^ 0xffffffffUL;
- while (len >= 8) {
- DO8;
- len -= 8;
- }
- if (len) do {
- DO1;
- } while (--len);
- return crc ^ 0xffffffffUL;
-}
-
-#ifdef BYFOUR
-
-/* ========================================================================= */
-#define DOLIT4 c ^= *buf4++; \
- c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
- crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
-#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
-
-/* ========================================================================= */
-local unsigned long crc32_little(crc, buf, len)
- unsigned long crc;
- const unsigned char FAR *buf;
- unsigned len;
-{
- register u4 c;
- register const u4 FAR *buf4;
-
- c = (u4)crc;
- c = ~c;
- while (len && ((ptrdiff_t)buf & 3)) {
- c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
- len--;
- }
-
- buf4 = (const u4 FAR *)(const void FAR *)buf;
- while (len >= 32) {
- DOLIT32;
- len -= 32;
- }
- while (len >= 4) {
- DOLIT4;
- len -= 4;
- }
- buf = (const unsigned char FAR *)buf4;
-
- if (len) do {
- c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
- } while (--len);
- c = ~c;
- return (unsigned long)c;
-}
-
-/* ========================================================================= */
-#define DOBIG4 c ^= *++buf4; \
- c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
- crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
-#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
-
-/* ========================================================================= */
-local unsigned long crc32_big(crc, buf, len)
- unsigned long crc;
- const unsigned char FAR *buf;
- unsigned len;
-{
- register u4 c;
- register const u4 FAR *buf4;
-
- c = REV((u4)crc);
- c = ~c;
- while (len && ((ptrdiff_t)buf & 3)) {
- c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
- len--;
- }
-
- buf4 = (const u4 FAR *)(const void FAR *)buf;
- buf4--;
- while (len >= 32) {
- DOBIG32;
- len -= 32;
- }
- while (len >= 4) {
- DOBIG4;
- len -= 4;
- }
- buf4++;
- buf = (const unsigned char FAR *)buf4;
-
- if (len) do {
- c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
- } while (--len);
- c = ~c;
- return (unsigned long)(REV(c));
-}
-
-#endif /* BYFOUR */
-
-#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */
-
-/* ========================================================================= */
-local unsigned long gf2_matrix_times(mat, vec)
- unsigned long *mat;
- unsigned long vec;
-{
- unsigned long sum;
-
- sum = 0;
- while (vec) {
- if (vec & 1)
- sum ^= *mat;
- vec >>= 1;
- mat++;
- }
- return sum;
-}
-
-/* ========================================================================= */
-local void gf2_matrix_square(square, mat)
- unsigned long *square;
- unsigned long *mat;
-{
- int n;
-
- for (n = 0; n < GF2_DIM; n++)
- square[n] = gf2_matrix_times(mat, mat[n]);
-}
-
-/* ========================================================================= */
-uLong ZEXPORT crc32_combine(crc1, crc2, len2)
- uLong crc1;
- uLong crc2;
- z_off_t len2;
-{
- int n;
- unsigned long row;
- unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */
- unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */
-
- /* degenerate case */
- if (len2 == 0)
- return crc1;
-
- /* put operator for one zero bit in odd */
- odd[0] = 0xedb88320UL; /* CRC-32 polynomial */
- row = 1;
- for (n = 1; n < GF2_DIM; n++) {
- odd[n] = row;
- row <<= 1;
- }
-
- /* put operator for two zero bits in even */
- gf2_matrix_square(even, odd);
-
- /* put operator for four zero bits in odd */
- gf2_matrix_square(odd, even);
-
- /* apply len2 zeros to crc1 (first square will put the operator for one
- zero byte, eight zero bits, in even) */
- do {
- /* apply zeros operator for this bit of len2 */
- gf2_matrix_square(even, odd);
- if (len2 & 1)
- crc1 = gf2_matrix_times(even, crc1);
- len2 >>= 1;
-
- /* if no more bits set, then done */
- if (len2 == 0)
- break;
-
- /* another iteration of the loop with odd and even swapped */
- gf2_matrix_square(odd, even);
- if (len2 & 1)
- crc1 = gf2_matrix_times(odd, crc1);
- len2 >>= 1;
-
- /* if no more bits set, then done */
- } while (len2 != 0);
-
- /* return combined crc */
- crc1 ^= crc2;
- return crc1;
-}
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c
@@ -1,1219 +0,0 @@
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2005 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-/*
- * ALGORITHM
- *
- * The "deflation" process uses several Huffman trees. The more
- * common source values are represented by shorter bit sequences.
- *
- * Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values). The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- * Storer, James A.
- * Data Compression: Methods and Theory, pp. 49-50.
- * Computer Science Press, 1988. ISBN 0-7167-8156-5.
- *
- * Sedgewick, R.
- * Algorithms, p290.
- * Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* #define GEN_TREES_H */
-
-#include "deflate.h"
-
-#ifdef DEBUG
-# include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6 16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10 17
-/* repeat a zero length 3-10 times (3 bits of repeat count) */
-
-#define REPZ_11_138 18
-/* repeat a zero length 11-138 times (7 bits of repeat count) */
-
-local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
- = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local const int extra_dbits[D_CODES] /* extra bits for each distance code */
- = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
- = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local const uch bl_order[BL_CODES]
- = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-#define DIST_CODE_LEN 512 /* see definition of array dist_code below */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-/* non ANSI compilers may not accept trees.h */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-uch _dist_code[DIST_CODE_LEN];
-/* Distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-uch _length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-#else
-# include "trees.h"
-#endif /* GEN_TREES_H */
-
-struct static_tree_desc_s {
- const ct_data *static_tree; /* static tree or NULL */
- const intf *extra_bits; /* extra bits for each code or NULL */
- int extra_base; /* base index for extra_bits */
- int elems; /* max number of elements in the tree */
- int max_length; /* max bit length for the codes */
-};
-
-local static_tree_desc static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc static_d_desc =
-{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS};
-
-local static_tree_desc static_bl_desc =
-{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block OF((deflate_state *s));
-local void pqdownheap OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen OF((deflate_state *s, tree_desc *desc));
-local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree OF((deflate_state *s, tree_desc *desc));
-local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local int build_bl_tree OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
- int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
- ct_data *dtree));
-local void set_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup OF((deflate_state *s));
-local void bi_flush OF((deflate_state *s));
-local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
- int header));
-
-#ifdef GEN_TREES_H
-local void gen_trees_header OF((void));
-#endif
-
-#ifndef DEBUG
-# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
- /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG */
-# define send_code(s, c, tree) \
- { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
- send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
- put_byte(s, (uch)((w) & 0xff)); \
- put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG
-local void send_bits OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
- deflate_state *s;
- int value; /* value to send */
- int length; /* number of bits */
-{
- Tracevv((stderr," l %2d v %4x ", length, value));
- Assert(length > 0 && length <= 15, "invalid length");
- s->bits_sent += (ulg)length;
-
- /* If not enough room in bi_buf, use (valid) bits from bi_buf and
- * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
- * unused bits in value.
- */
- if (s->bi_valid > (int)Buf_size - length) {
- s->bi_buf |= (value << s->bi_valid);
- put_short(s, s->bi_buf);
- s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
- s->bi_valid += length - Buf_size;
- } else {
- s->bi_buf |= value << s->bi_valid;
- s->bi_valid += length;
- }
-}
-#else /* !DEBUG */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
- if (s->bi_valid > (int)Buf_size - len) {\
- int val = value;\
- s->bi_buf |= (val << s->bi_valid);\
- put_short(s, s->bi_buf);\
- s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
- s->bi_valid += len - Buf_size;\
- } else {\
- s->bi_buf |= (value) << s->bi_valid;\
- s->bi_valid += len;\
- }\
-}
-#endif /* DEBUG */
-
-
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables.
- */
-local void tr_static_init()
-{
-#if defined(GEN_TREES_H) || !defined(STDC)
- static int static_init_done = 0;
- int n; /* iterates over tree elements */
- int bits; /* bit counter */
- int length; /* length value */
- int code; /* code value */
- int dist; /* distance index */
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- if (static_init_done) return;
-
- /* For some embedded targets, global variables are not initialized: */
- static_l_desc.static_tree = static_ltree;
- static_l_desc.extra_bits = extra_lbits;
- static_d_desc.static_tree = static_dtree;
- static_d_desc.extra_bits = extra_dbits;
- static_bl_desc.extra_bits = extra_blbits;
-
- /* Initialize the mapping length (0..255) -> length code (0..28) */
- length = 0;
- for (code = 0; code < LENGTH_CODES-1; code++) {
- base_length[code] = length;
- for (n = 0; n < (1<<extra_lbits[code]); n++) {
- _length_code[length++] = (uch)code;
- }
- }
- Assert (length == 256, "tr_static_init: length != 256");
- /* Note that the length 255 (match length 258) can be represented
- * in two different ways: code 284 + 5 bits or code 285, so we
- * overwrite length_code[255] to use the best encoding:
- */
- _length_code[length-1] = (uch)code;
-
- /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
- dist = 0;
- for (code = 0 ; code < 16; code++) {
- base_dist[code] = dist;
- for (n = 0; n < (1<<extra_dbits[code]); n++) {
- _dist_code[dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "tr_static_init: dist != 256");
- dist >>= 7; /* from now on, all distances are divided by 128 */
- for ( ; code < D_CODES; code++) {
- base_dist[code] = dist << 7;
- for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
- _dist_code[256 + dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
- /* Construct the codes of the static literal tree */
- for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
- n = 0;
- while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
- while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
- while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
- while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
- /* Codes 286 and 287 do not exist, but we must include them in the
- * tree construction to get a canonical Huffman tree (longest code
- * all ones)
- */
- gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
- /* The static distance tree is trivial: */
- for (n = 0; n < D_CODES; n++) {
- static_dtree[n].Len = 5;
- static_dtree[n].Code = bi_reverse((unsigned)n, 5);
- }
- static_init_done = 1;
-
-# ifdef GEN_TREES_H
- gen_trees_header();
-# endif
-#endif /* defined(GEN_TREES_H) || !defined(STDC) */
-}
-
-/* ===========================================================================
- * Genererate the file trees.h describing the static trees.
- */
-#ifdef GEN_TREES_H
-# ifndef DEBUG
-# include <stdio.h>
-# endif
-
-# define SEPARATOR(i, last, width) \
- ((i) == (last)? "\n};\n\n" : \
- ((i) % (width) == (width)-1 ? ",\n" : ", "))
-
-void gen_trees_header()
-{
- FILE *header = fopen("trees.h", "w");
- int i;
-
- Assert (header != NULL, "Can't open trees.h");
- fprintf(header,
- "/* header created automatically with -DGEN_TREES_H */\n\n");
-
- fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
- for (i = 0; i < L_CODES+2; i++) {
- fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
- static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
- }
-
- fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
- for (i = 0; i < D_CODES; i++) {
- fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
- static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
- }
-
- fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
- for (i = 0; i < DIST_CODE_LEN; i++) {
- fprintf(header, "%2u%s", _dist_code[i],
- SEPARATOR(i, DIST_CODE_LEN-1, 20));
- }
-
- fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
- for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
- fprintf(header, "%2u%s", _length_code[i],
- SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
- }
-
- fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
- for (i = 0; i < LENGTH_CODES; i++) {
- fprintf(header, "%1u%s", base_length[i],
- SEPARATOR(i, LENGTH_CODES-1, 20));
- }
-
- fprintf(header, "local const int base_dist[D_CODES] = {\n");
- for (i = 0; i < D_CODES; i++) {
- fprintf(header, "%5u%s", base_dist[i],
- SEPARATOR(i, D_CODES-1, 10));
- }
-
- fclose(header);
-}
-#endif /* GEN_TREES_H */
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void _tr_init(s)
- deflate_state *s;
-{
- tr_static_init();
-
- s->l_desc.dyn_tree = s->dyn_ltree;
- s->l_desc.stat_desc = &static_l_desc;
-
- s->d_desc.dyn_tree = s->dyn_dtree;
- s->d_desc.stat_desc = &static_d_desc;
-
- s->bl_desc.dyn_tree = s->bl_tree;
- s->bl_desc.stat_desc = &static_bl_desc;
-
- s->bi_buf = 0;
- s->bi_valid = 0;
- s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG
- s->compressed_len = 0L;
- s->bits_sent = 0L;
-#endif
-
- /* Initialize the first block of the first file: */
- init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
- deflate_state *s;
-{
- int n; /* iterates over tree elements */
-
- /* Initialize the trees. */
- for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0;
- for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0;
- for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
- s->dyn_ltree[END_BLOCK].Freq = 1;
- s->opt_len = s->static_len = 0L;
- s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
- top = s->heap[SMALLEST]; \
- s->heap[SMALLEST] = s->heap[s->heap_len--]; \
- pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
- (tree[n].Freq < tree[m].Freq || \
- (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
- deflate_state *s;
- ct_data *tree; /* the tree to restore */
- int k; /* node to move down */
-{
- int v = s->heap[k];
- int j = k << 1; /* left son of k */
- while (j <= s->heap_len) {
- /* Set j to the smallest of the two sons: */
- if (j < s->heap_len &&
- smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
- j++;
- }
- /* Exit if v is smaller than both sons */
- if (smaller(tree, v, s->heap[j], s->depth)) break;
-
- /* Exchange v with the smallest son */
- s->heap[k] = s->heap[j]; k = j;
-
- /* And continue down the tree, setting j to the left son of k */
- j <<= 1;
- }
- s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- * above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- * array bl_count contains the frequencies for each bit length.
- * The length opt_len is updated; static_len is also updated if stree is
- * not null.
- */
-local void gen_bitlen(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- int max_code = desc->max_code;
- const ct_data *stree = desc->stat_desc->static_tree;
- const intf *extra = desc->stat_desc->extra_bits;
- int base = desc->stat_desc->extra_base;
- int max_length = desc->stat_desc->max_length;
- int h; /* heap index */
- int n, m; /* iterate over the tree elements */
- int bits; /* bit length */
- int xbits; /* extra bits */
- ush f; /* frequency */
- int overflow = 0; /* number of elements with bit length too large */
-
- for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
- /* In a first pass, compute the optimal bit lengths (which may
- * overflow in the case of the bit length tree).
- */
- tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
- for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
- n = s->heap[h];
- bits = tree[tree[n].Dad].Len + 1;
- if (bits > max_length) bits = max_length, overflow++;
- tree[n].Len = (ush)bits;
- /* We overwrite tree[n].Dad which is no longer needed */
-
- if (n > max_code) continue; /* not a leaf node */
-
- s->bl_count[bits]++;
- xbits = 0;
- if (n >= base) xbits = extra[n-base];
- f = tree[n].Freq;
- s->opt_len += (ulg)f * (bits + xbits);
- if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
- }
- if (overflow == 0) return;
-
- Trace((stderr,"\nbit length overflow\n"));
- /* This happens for example on obj2 and pic of the Calgary corpus */
-
- /* Find the first bit length which could increase: */
- do {
- bits = max_length-1;
- while (s->bl_count[bits] == 0) bits--;
- s->bl_count[bits]--; /* move one leaf down the tree */
- s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
- s->bl_count[max_length]--;
- /* The brother of the overflow item also moves one step up,
- * but this does not affect bl_count[max_length]
- */
- overflow -= 2;
- } while (overflow > 0);
-
- /* Now recompute all bit lengths, scanning in increasing frequency.
- * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
- * lengths instead of fixing only the wrong ones. This idea is taken
- * from 'ar' written by Haruhiko Okumura.)
- */
- for (bits = max_length; bits != 0; bits--) {
- n = s->bl_count[bits];
- while (n != 0) {
- m = s->heap[--h];
- if (m > max_code) continue;
- if ((unsigned) tree[m].Len != (unsigned) bits) {
- Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
- s->opt_len += ((long)bits - (long)tree[m].Len)
- *(long)tree[m].Freq;
- tree[m].Len = (ush)bits;
- }
- n--;
- }
- }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- * zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
- ct_data *tree; /* the tree to decorate */
- int max_code; /* largest code with non zero frequency */
- ushf *bl_count; /* number of codes at each bit length */
-{
- ush next_code[MAX_BITS+1]; /* next code value for each bit length */
- ush code = 0; /* running code value */
- int bits; /* bit index */
- int n; /* code index */
-
- /* The distribution counts are first used to generate the code values
- * without bit reversal.
- */
- for (bits = 1; bits <= MAX_BITS; bits++) {
- next_code[bits] = code = (code + bl_count[bits-1]) << 1;
- }
- /* Check that the bit counts in bl_count are consistent. The last code
- * must be all ones.
- */
- Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
- "inconsistent bit counts");
- Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
- for (n = 0; n <= max_code; n++) {
- int len = tree[n].Len;
- if (len == 0) continue;
- /* Now reverse the bits */
- tree[n].Code = bi_reverse(next_code[len]++, len);
-
- Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
- n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
- }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- * and corresponding code. The length opt_len is updated; static_len is
- * also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- const ct_data *stree = desc->stat_desc->static_tree;
- int elems = desc->stat_desc->elems;
- int n, m; /* iterate over heap elements */
- int max_code = -1; /* largest code with non zero frequency */
- int node; /* new node being created */
-
- /* Construct the initial heap, with least frequent element in
- * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
- * heap[0] is not used.
- */
- s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
- for (n = 0; n < elems; n++) {
- if (tree[n].Freq != 0) {
- s->heap[++(s->heap_len)] = max_code = n;
- s->depth[n] = 0;
- } else {
- tree[n].Len = 0;
- }
- }
-
- /* The pkzip format requires that at least one distance code exists,
- * and that at least one bit should be sent even if there is only one
- * possible code. So to avoid special checks later on we force at least
- * two codes of non zero frequency.
- */
- while (s->heap_len < 2) {
- node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
- tree[node].Freq = 1;
- s->depth[node] = 0;
- s->opt_len--; if (stree) s->static_len -= stree[node].Len;
- /* node is 0 or 1 so it does not have extra bits */
- }
- desc->max_code = max_code;
-
- /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
- * establish sub-heaps of increasing lengths:
- */
- for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
- /* Construct the Huffman tree by repeatedly combining the least two
- * frequent nodes.
- */
- node = elems; /* next internal node of the tree */
- do {
- pqremove(s, tree, n); /* n = node of least frequency */
- m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
- s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
- s->heap[--(s->heap_max)] = m;
-
- /* Create a new node father of n and m */
- tree[node].Freq = tree[n].Freq + tree[m].Freq;
- s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
- s->depth[n] : s->depth[m]) + 1);
- tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
- if (tree == s->bl_tree) {
- fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
- node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
- }
-#endif
- /* and insert the new node in the heap */
- s->heap[SMALLEST] = node++;
- pqdownheap(s, tree, SMALLEST);
-
- } while (s->heap_len >= 2);
-
- s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
- /* At this point, the fields freq and dad are set. We can now
- * generate the bit lengths.
- */
- gen_bitlen(s, (tree_desc *)desc);
-
- /* The field len is now set, we can generate the bit codes */
- gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- if (nextlen == 0) max_count = 138, min_count = 3;
- tree[max_code+1].Len = (ush)0xffff; /* guard */
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- s->bl_tree[curlen].Freq += count;
- } else if (curlen != 0) {
- if (curlen != prevlen) s->bl_tree[curlen].Freq++;
- s->bl_tree[REP_3_6].Freq++;
- } else if (count <= 10) {
- s->bl_tree[REPZ_3_10].Freq++;
- } else {
- s->bl_tree[REPZ_11_138].Freq++;
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- /* tree[max_code+1].Len = -1; */ /* guard already set */
- if (nextlen == 0) max_count = 138, min_count = 3;
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
- } else if (curlen != 0) {
- if (curlen != prevlen) {
- send_code(s, curlen, s->bl_tree); count--;
- }
- Assert(count >= 3 && count <= 6, " 3_6?");
- send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
- } else if (count <= 10) {
- send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
- } else {
- send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
- deflate_state *s;
-{
- int max_blindex; /* index of last bit length code of non zero freq */
-
- /* Determine the bit length frequencies for literal and distance trees */
- scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
- scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
- /* Build the bit length tree: */
- build_tree(s, (tree_desc *)(&(s->bl_desc)));
- /* opt_len now includes the length of the tree representations, except
- * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
- */
-
- /* Determine the number of bit length codes to send. The pkzip format
- * requires that at least 4 bit length codes be sent. (appnote.txt says
- * 3 but the actual value used is 4.)
- */
- for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
- if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
- }
- /* Update opt_len to include the bit length tree and counts */
- s->opt_len += 3*(max_blindex+1) + 5+5+4;
- Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
- s->opt_len, s->static_len));
-
- return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
- deflate_state *s;
- int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
- int rank; /* index in bl_order */
-
- Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
- Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
- "too many codes");
- Tracev((stderr, "\nbl counts: "));
- send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
- send_bits(s, dcodes-1, 5);
- send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */
- for (rank = 0; rank < blcodes; rank++) {
- Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
- send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
- }
- Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
- Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
- Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void _tr_stored_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */
-#ifdef DEBUG
- s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
- s->compressed_len += (stored_len + 4) << 3;
-#endif
- copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void _tr_align(s)
- deflate_state *s;
-{
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
- s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-#endif
- bi_flush(s);
- /* Of the 10 bits for the empty block, we have already sent
- * (10 - bi_valid) bits. The lookahead for the last real code (before
- * the EOB of the previous block) was thus at least one plus the length
- * of the EOB plus what we have just sent of the empty static block.
- */
- if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
- s->compressed_len += 10L;
-#endif
- bi_flush(s);
- }
- s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
- */
-void _tr_flush_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block, or NULL if too old */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
- int max_blindex = 0; /* index of last bit length code of non zero freq */
-
- /* Build the Huffman trees unless a stored block is forced */
- if (s->level > 0) {
-
- /* Check if the file is binary or text */
- if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN)
- set_data_type(s);
-
- /* Construct the literal and distance trees */
- build_tree(s, (tree_desc *)(&(s->l_desc)));
- Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
-
- build_tree(s, (tree_desc *)(&(s->d_desc)));
- Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
- /* At this point, opt_len and static_len are the total bit lengths of
- * the compressed block data, excluding the tree representations.
- */
-
- /* Build the bit length tree for the above two trees, and get the index
- * in bl_order of the last bit length code to send.
- */
- max_blindex = build_bl_tree(s);
-
- /* Determine the best encoding. Compute the block lengths in bytes. */
- opt_lenb = (s->opt_len+3+7)>>3;
- static_lenb = (s->static_len+3+7)>>3;
-
- Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
- opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
- s->last_lit));
-
- if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
- } else {
- Assert(buf != (char*)0, "lost buf");
- opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
- }
-
-#ifdef FORCE_STORED
- if (buf != (char*)0) { /* force stored block */
-#else
- if (stored_len+4 <= opt_lenb && buf != (char*)0) {
- /* 4: two words for the lengths */
-#endif
- /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
- * Otherwise we can't have processed more than WSIZE input bytes since
- * the last block flush, because compression would have been
- * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
- * transform a block into a stored block.
- */
- _tr_stored_block(s, buf, stored_len, eof);
-
-#ifdef FORCE_STATIC
- } else if (static_lenb >= 0) { /* force static trees */
-#else
- } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
-#endif
- send_bits(s, (STATIC_TREES<<1)+eof, 3);
- compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-#ifdef DEBUG
- s->compressed_len += 3 + s->static_len;
-#endif
- } else {
- send_bits(s, (DYN_TREES<<1)+eof, 3);
- send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
- max_blindex+1);
- compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-#ifdef DEBUG
- s->compressed_len += 3 + s->opt_len;
-#endif
- }
- Assert (s->compressed_len == s->bits_sent, "bad compressed size");
- /* The above check is made mod 2^32, for files larger than 512 MB
- * and uLong implemented on 32 bits.
- */
- init_block(s);
-
- if (eof) {
- bi_windup(s);
-#ifdef DEBUG
- s->compressed_len += 7; /* align on byte boundary */
-#endif
- }
- Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
- s->compressed_len-7*eof));
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int _tr_tally (s, dist, lc)
- deflate_state *s;
- unsigned dist; /* distance of matched string */
- unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
- s->d_buf[s->last_lit] = (ush)dist;
- s->l_buf[s->last_lit++] = (uch)lc;
- if (dist == 0) {
- /* lc is the unmatched char */
- s->dyn_ltree[lc].Freq++;
- } else {
- s->matches++;
- /* Here, lc is the match length - MIN_MATCH */
- dist--; /* dist = match distance - 1 */
- Assert((ush)dist < (ush)MAX_DIST(s) &&
- (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
- (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match");
-
- s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
- s->dyn_dtree[d_code(dist)].Freq++;
- }
-
-#ifdef TRUNCATE_BLOCK
- /* Try to guess if it is profitable to stop the current block here */
- if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
- /* Compute an upper bound for the compressed length */
- ulg out_length = (ulg)s->last_lit*8L;
- ulg in_length = (ulg)((long)s->strstart - s->block_start);
- int dcode;
- for (dcode = 0; dcode < D_CODES; dcode++) {
- out_length += (ulg)s->dyn_dtree[dcode].Freq *
- (5L+extra_dbits[dcode]);
- }
- out_length >>= 3;
- Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
- s->last_lit, in_length, out_length,
- 100L - out_length*100L/in_length));
- if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
- }
-#endif
- return (s->last_lit == s->lit_bufsize-1);
- /* We avoid equality with lit_bufsize because of wraparound at 64K
- * on 16 bit machines and because stored blocks are restricted to
- * 64K-1 bytes.
- */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
- deflate_state *s;
- ct_data *ltree; /* literal tree */
- ct_data *dtree; /* distance tree */
-{
- unsigned dist; /* distance of matched string */
- int lc; /* match length or unmatched char (if dist == 0) */
- unsigned lx = 0; /* running index in l_buf */
- unsigned code; /* the code to send */
- int extra; /* number of extra bits to send */
-
- if (s->last_lit != 0) do {
- dist = s->d_buf[lx];
- lc = s->l_buf[lx++];
- if (dist == 0) {
- send_code(s, lc, ltree); /* send a literal byte */
- Tracecv(isgraph(lc), (stderr," '%c' ", lc));
- } else {
- /* Here, lc is the match length - MIN_MATCH */
- code = _length_code[lc];
- send_code(s, code+LITERALS+1, ltree); /* send the length code */
- extra = extra_lbits[code];
- if (extra != 0) {
- lc -= base_length[code];
- send_bits(s, lc, extra); /* send the extra length bits */
- }
- dist--; /* dist is now the match distance - 1 */
- code = d_code(dist);
- Assert (code < D_CODES, "bad d_code");
-
- send_code(s, code, dtree); /* send the distance code */
- extra = extra_dbits[code];
- if (extra != 0) {
- dist -= base_dist[code];
- send_bits(s, dist, extra); /* send the extra distance bits */
- }
- } /* literal or match pair ? */
-
- /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
- Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
- "pendingBuf overflow");
-
- } while (lx < s->last_lit);
-
- send_code(s, END_BLOCK, ltree);
- s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to BINARY or TEXT, using a crude approximation:
- * set it to Z_TEXT if all symbols are either printable characters (33 to 255)
- * or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise.
- * IN assertion: the fields Freq of dyn_ltree are set.
- */
-local void set_data_type(s)
- deflate_state *s;
-{
- int n;
-
- for (n = 0; n < 9; n++)
- if (s->dyn_ltree[n].Freq != 0)
- break;
- if (n == 9)
- for (n = 14; n < 32; n++)
- if (s->dyn_ltree[n].Freq != 0)
- break;
- s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY;
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
- unsigned code; /* the value to invert */
- int len; /* its bit length */
-{
- register unsigned res = 0;
- do {
- res |= code & 1;
- code >>= 1, res <<= 1;
- } while (--len > 0);
- return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
- deflate_state *s;
-{
- if (s->bi_valid == 16) {
- put_short(s, s->bi_buf);
- s->bi_buf = 0;
- s->bi_valid = 0;
- } else if (s->bi_valid >= 8) {
- put_byte(s, (Byte)s->bi_buf);
- s->bi_buf >>= 8;
- s->bi_valid -= 8;
- }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
- deflate_state *s;
-{
- if (s->bi_valid > 8) {
- put_short(s, s->bi_buf);
- } else if (s->bi_valid > 0) {
- put_byte(s, (Byte)s->bi_buf);
- }
- s->bi_buf = 0;
- s->bi_valid = 0;
-#ifdef DEBUG
- s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
- deflate_state *s;
- charf *buf; /* the input data */
- unsigned len; /* its length */
- int header; /* true if block header must be written */
-{
- bi_windup(s); /* align on byte boundary */
- s->last_eob_len = 8; /* enough lookahead for inflate */
-
- if (header) {
- put_short(s, (ush)len);
- put_short(s, (ush)~len);
-#ifdef DEBUG
- s->bits_sent += 2*16;
-#endif
- }
-#ifdef DEBUG
- s->bits_sent += (ulg)len<<3;
-#endif
- while (len--) {
- put_byte(s, *buf++);
- }
-}
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h
@@ -1,117 +0,0 @@
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License (the "License").
- * You may not use this file except in compliance with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-
-/*
- * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
- * Use is subject to license terms.
- */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/types.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * We don't want to turn on zlib's debugging.
- */
-#undef DEBUG
-
-/*
- * We define our own memory allocation and deallocation routines that use kmem.
- */
-#define MY_ZCALLOC
-
-/*
- * We don't define HAVE_MEMCPY here, but do in zutil.c, and implement our
- * our versions of zmemcpy(), zmemzero(), and zmemcmp().
- */
-
-/*
- * We have a sufficiently capable compiler as to not need zlib's compiler hack.
- */
-#define NO_DUMMY_DECL
-
-#define compressBound(len) (len + (len >> 12) + (len >> 14) + 11)
-
-#define z_off_t off_t
-#define OF(p) p
-#define ZEXTERN extern
-#define ZEXPORT
-#define ZEXPORTVA
-#define FAR
-
-#define deflateInit_ z_deflateInit_
-#define deflate z_deflate
-#define deflateEnd z_deflateEnd
-#define inflateInit_ z_inflateInit_
-#define inflate z_inflate
-#define inflateEnd z_inflateEnd
-#define deflateInit2_ z_deflateInit2_
-#define deflateSetDictionary z_deflateSetDictionary
-#define deflateCopy z_deflateCopy
-#define deflateReset z_deflateReset
-#define deflateParams z_deflateParams
-#define deflateBound z_deflateBound
-#define deflatePrime z_deflatePrime
-#define inflateInit2_ z_inflateInit2_
-#define inflateSetDictionary z_inflateSetDictionary
-#define inflateSync z_inflateSync
-#define inflateSyncPoint z_inflateSyncPoint
-#define inflateCopy z_inflateCopy
-#define inflateReset z_inflateReset
-#define inflateBack z_inflateBack
-#define inflateBackEnd z_inflateBackEnd
-#define compress zz_compress
-#define compress2 zz_compress2
-#define uncompress zz_uncompress
-#define adler32 z_adler32
-#define crc32 z_crc32
-#define get_crc_table z_get_crc_table
-#define zError z_zError
-
-#define MAX_MEM_LEVEL 9
-#define MAX_WBITS 15
-
-typedef unsigned char Byte;
-typedef unsigned int uInt;
-typedef unsigned long uLong;
-typedef Byte Bytef;
-typedef char charf;
-typedef int intf;
-typedef uInt uIntf;
-typedef uLong uLongf;
-typedef void *voidpc;
-typedef void *voidpf;
-typedef void *voidp;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZCONF_H */
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h
@@ -1,1359 +0,0 @@
-/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.3, July 18th, 2005
-
- Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- jloup@gzip.org madler@alumni.caltech.edu
-
-
- The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
- (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#include "zconf.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define ZLIB_VERSION "1.2.3"
-#define ZLIB_VERNUM 0x1230
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms will be added later and will have the same
- stream interface.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
-
- The compressed data format used by default by the in-memory functions is
- the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
- around a deflate stream, which is itself documented in RFC 1951.
-
- The library also supports reading and writing files in gzip (.gz) format
- with an interface similar to that of stdio using the functions that start
- with "gz". The gzip format is different from the zlib format. gzip is a
- gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
-
- This library can optionally read and write gzip streams in memory as well.
-
- The zlib format was designed to be compact and fast for use in memory
- and on communications channels. The gzip format was designed for single-
- file compression on file systems, has a larger header than zlib to maintain
- directory information, and uses a different, slower check method than zlib.
-
- The library does not install any signal handler. The decoder checks
- the consistency of the compressed data, so the library should never
- crash even in case of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void (*free_func) OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
- uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Bytef *next_out; /* next output byte should be put there */
- uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- char *msg; /* last error message, NULL if no error */
- struct internal_state FAR *state; /* not visible by applications */
-
- alloc_func zalloc; /* used to allocate the internal state */
- free_func zfree; /* used to free the internal state */
- voidpf opaque; /* private data object passed to zalloc and zfree */
-
- int data_type; /* best guess about the data type: binary or text */
- uLong adler; /* adler32 value of the uncompressed data */
- uLong reserved; /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
- gzip header information passed to and from zlib routines. See RFC 1952
- for more details on the meanings of these fields.
-*/
-typedef struct gz_header_s {
- int text; /* true if compressed data believed to be text */
- uLong time; /* modification time */
- int xflags; /* extra flags (not used when writing a gzip file) */
- int os; /* operating system */
- Bytef *extra; /* pointer to extra field or Z_NULL if none */
- uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
- uInt extra_max; /* space at extra (only when reading header) */
- Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
- uInt name_max; /* space at name (only when reading header) */
- Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
- uInt comm_max; /* space at comment (only when reading header) */
- int hcrc; /* true if there was or will be a header crc */
- int done; /* true when done reading gzip header (not used
- when writing a gzip file) */
-} gz_header;
-
-typedef gz_header FAR *gz_headerp;
-
-/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return Z_NULL if there is not enough memory for the object.
- If zlib is used in a multi-threaded application, zalloc and zfree must be
- thread safe.
-
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
-#define Z_SYNC_FLUSH 2
-#define Z_FULL_FLUSH 3
-#define Z_FINISH 4
-#define Z_BLOCK 5
-/* Allowed flush values; see deflate() and inflate() below for details */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_NEED_DICT 2
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION 0
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_RLE 3
-#define Z_FIXED 4
-#define Z_DEFAULT_STRATEGY 0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY 0
-#define Z_TEXT 1
-#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
-#define Z_UNKNOWN 2
-/* Possible values of the data_type field (though see inflate()) */
-
-#define Z_DEFLATED 8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
- /* basic functions */
-
-ZEXTERN const char * ZEXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by deflateInit and inflateInit.
- */
-
-/*
-ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
-
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller.
- If zalloc and zfree are set to Z_NULL, deflateInit updates them to
- use default allocation functions.
-
- The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- Z_DEFAULT_COMPRESSION requests a default compromise between speed and
- compression (currently equivalent to level 6).
-
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if level is not a valid compression level,
- Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- msg is set to null if there is no error message. deflateInit does not
- perform any compression: this will be done by deflate().
-*/
-
-
-ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
-/*
- deflate compresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce some
- output latency (reading input without producing any output) except when
- forced to flush.
-
- The detailed semantics are as follows. deflate performs one or both of the
- following actions:
-
- - Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in and avail_in are updated and
- processing will resume at this point for the next call of deflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating avail_in or avail_out accordingly; avail_out
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
- and with zero avail_out, it must be called again after making room in the
- output buffer because there might be more output pending.
-
- Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
- decide how much data to accumualte before producing output, in order to
- maximize compression.
-
- If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
- flushed to the output buffer and the output is aligned on a byte boundary, so
- that the decompressor can get all input data available so far. (In particular
- avail_in is zero after the call if enough output space has been provided
- before the call.) Flushing may degrade compression for some compression
- algorithms and so it should be used only when necessary.
-
- If flush is set to Z_FULL_FLUSH, all output is flushed as with
- Z_SYNC_FLUSH, and the compression state is reset so that decompression can
- restart from this point if previous compressed data has been damaged or if
- random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
- compression.
-
- If deflate returns with avail_out == 0, this function must be called again
- with the same value of the flush parameter and more output space (updated
- avail_out), until the flush is complete (deflate returns with non-zero
- avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
- avail_out is greater than six to avoid repeated flush markers due to
- avail_out == 0 on return.
-
- If the parameter flush is set to Z_FINISH, pending input is processed,
- pending output is flushed and deflate returns with Z_STREAM_END if there
- was enough output space; if deflate returns with Z_OK, this function must be
- called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the
- stream are deflateReset or deflateEnd.
-
- Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least
- the value returned by deflateBound (see below). If deflate does not return
- Z_STREAM_END, then it must be called again as described above.
-
- deflate() sets strm->adler to the adler32 checksum of all input read
- so far (that is, total_in bytes).
-
- deflate() may update strm->data_type if it can make a good guess about
- the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
-
- deflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if all input has been
- consumed and all output has been produced (only when flush is set to
- Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
- (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
- fatal, and deflate() can be called again with more input and more output
- space to continue compressing.
-*/
-
-
-ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
- stream state was inconsistent, Z_DATA_ERROR if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- msg may be set but then points to a static string (which must not be
- deallocated).
-*/
-
-
-/*
-ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
-
- Initializes the internal stream state for decompression. The fields
- next_in, avail_in, zalloc, zfree and opaque must be initialized before by
- the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
- value depends on the compression method), inflateInit determines the
- compression method from the zlib header and allocates all data structures
- accordingly; otherwise the allocation will be deferred to the first call of
- inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
- use default allocation functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
- version assumed by the caller. msg is set to null if there is no error
- message. inflateInit does not perform any decompression apart from reading
- the zlib header if present: this will be done by inflate(). (So next_in and
- avail_in may be modified, but next_out and avail_out are unchanged.)
-*/
-
-
-ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
-/*
- inflate decompresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce
- some output latency (reading input without producing any output) except when
- forced to flush.
-
- The detailed semantics are as follows. inflate performs one or both of the
- following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() provides as much output as possible, until there
- is no more input data or no more space in the output buffer (see below
- about the flush parameter).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate(). If inflate returns Z_OK and with zero avail_out, it
- must be called again after making room in the output buffer because there
- might be more output pending.
-
- The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
- Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
- output as possible to the output buffer. Z_BLOCK requests that inflate() stop
- if and when it gets to the next deflate block boundary. When decoding the
- zlib or gzip format, this will cause inflate() to return immediately after
- the header and before the first block. When doing a raw inflate, inflate()
- will go ahead and process the first block, and will return when it gets to
- the end of that block, or when it runs out of data.
-
- The Z_BLOCK option assists in appending to or combining deflate streams.
- Also to assist in this, on return inflate() will set strm->data_type to the
- number of unused bits in the last byte taken from strm->next_in, plus 64
- if inflate() is currently decoding the last block in the deflate stream,
- plus 128 if inflate() returned immediately after decoding an end-of-block
- code or decoding the complete header up to just before the first byte of the
- deflate stream. The end-of-block will not be indicated until all of the
- uncompressed data from that block has been written to strm->next_out. The
- number of unused bits may in general be greater than seven, except when
- bit 7 of data_type is set, in which case the number of unused bits will be
- less than eight.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster approach
- may be used for the single inflate() call.
-
- In this implementation, inflate() always flushes as much output as
- possible to the output buffer, and always uses the faster approach on the
- first call. So the only effect of the flush parameter in this implementation
- is on the return value of inflate(), as noted below, or when it returns early
- because Z_BLOCK is used.
-
- If a preset dictionary is needed after this call (see inflateSetDictionary
- below), inflate sets strm->adler to the adler32 checksum of the dictionary
- chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
- strm->adler to the adler32 checksum of all output produced so far (that is,
- total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
- below. At the end of the stream, inflate() checks that its computed adler32
- checksum is equal to that saved by the compressor and returns Z_STREAM_END
- only if the checksum is correct.
-
- inflate() will decompress and check either zlib-wrapped or gzip-wrapped
- deflate data. The header type is detected automatically. Any information
- contained in the gzip header is not retained, so applications that need that
- information should instead use raw inflate, see inflateInit2() below, or
- inflateBack() and perform their own processing of the gzip header and
- trailer.
-
- inflate() returns Z_OK if some progress has been made (more input processed
- or more output produced), Z_STREAM_END if the end of the compressed data has
- been reached and all uncompressed output has been produced, Z_NEED_DICT if a
- preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
- corrupted (input stream not conforming to the zlib format or incorrect check
- value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
- if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
- Z_BUF_ERROR if no progress is possible or if there was not enough room in the
- output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
- inflate() can be called again with more input and more output space to
- continue decompressing. If Z_DATA_ERROR is returned, the application may then
- call inflateSync() to look for a good compression block if a partial recovery
- of the data is desired.
-*/
-
-
-ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
- /* Advanced functions */
-
-/*
- The following functions are needed only in some special applications.
-*/
-
-/*
-ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
- int level,
- int method,
- int windowBits,
- int memLevel,
- int strategy));
-
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by
- the caller.
-
- The method parameter is the compression method. It must be Z_DEFLATED in
- this version of the library.
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library. Larger values of this parameter result in better
- compression at the expense of memory usage. The default value is 15 if
- deflateInit is used instead.
-
- windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
- determines the window size. deflate() will then generate raw deflate data
- with no zlib header or trailer, and will not compute an adler32 check value.
-
- windowBits can also be greater than 15 for optional gzip encoding. Add
- 16 to windowBits to write a simple gzip header and trailer around the
- compressed data instead of a zlib wrapper. The gzip header will have no
- file name, no extra data, no comment, no modification time (set to zero),
- no header crc, and the operating system will be set to 255 (unknown). If a
- gzip stream is being written, strm->adler is a crc32 instead of an adler32.
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.
-
- The strategy parameter is used to tune the compression algorithm. Use the
- value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
- filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
- string match), or Z_RLE to limit match distances to one (run-length
- encoding). Filtered data consists mostly of small values with a somewhat
- random distribution. In this case, the compression algorithm is tuned to
- compress them better. The effect of Z_FILTERED is to force more Huffman
- coding and less string matching; it is somewhat intermediate between
- Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as
- Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy
- parameter only affects the compression ratio but not the correctness of the
- compressed output even if it is not set appropriately. Z_FIXED prevents the
- use of dynamic Huffman codes, allowing for a simpler decoder for special
- applications.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
- method). msg is set to null if there is no error message. deflateInit2 does
- not perform any compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the compression dictionary from the given byte sequence
- without producing any compressed output. This function must be called
- immediately after deflateInit, deflateInit2 or deflateReset, before any
- call of deflate. The compressor and decompressor must use exactly the same
- dictionary (see inflateSetDictionary).
-
- The dictionary should consist of strings (byte sequences) that are likely
- to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
- dictionary is most useful when the data to be compressed is short and can be
- predicted with good accuracy; the data can then be compressed better than
- with the default empty dictionary.
-
- Depending on the size of the compression data structures selected by
- deflateInit or deflateInit2, a part of the dictionary may in effect be
- discarded, for example if the dictionary is larger than the window size in
- deflate or deflate2. Thus the strings most likely to be useful should be
- put at the end of the dictionary, not at the front. In addition, the
- current implementation of deflate will use at most the window size minus
- 262 bytes of the provided dictionary.
-
- Upon return of this function, strm->adler is set to the adler32 value
- of the dictionary; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The adler32 value
- applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.) If a raw deflate was requested, then the
- adler32 value is not computed and strm->adler is not set.
-
- deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
- inconsistent (for example if deflate has already been called for this stream
- or if the compression method is bsort). deflateSetDictionary does not
- perform any compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
- z_streamp source));
-/*
- Sets the destination stream as a complete copy of the source stream.
-
- This function can be useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and
- can consume lots of memory.
-
- deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
- destination.
-*/
-
-ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
-/*
- This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state.
- The stream will keep the same compression level and any other attributes
- that may have been set by deflateInit2.
-
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
- int level,
- int strategy));
-/*
- Dynamically update the compression level and compression strategy. The
- interpretation of level and strategy is as in deflateInit2. This can be
- used to switch between compression and straight copy of the input data, or
- to switch to a different kind of input data requiring a different
- strategy. If the compression level is changed, the input available so far
- is compressed with the old level (and may be flushed); the new level will
- take effect only at the next call of deflate().
-
- Before the call of deflateParams, the stream state must be set as for
- a call of deflate(), since the currently available input may have to
- be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
- deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
- stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
- if strm->avail_out was zero.
-*/
-
-ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
- int good_length,
- int max_lazy,
- int nice_length,
- int max_chain));
-/*
- Fine tune deflate's internal compression parameters. This should only be
- used by someone who understands the algorithm used by zlib's deflate for
- searching for the best matching string, and even then only by the most
- fanatic optimizer trying to squeeze out the last compressed bit for their
- specific input data. Read the deflate.c source code for the meaning of the
- max_lazy, good_length, nice_length, and max_chain parameters.
-
- deflateTune() can be called after deflateInit() or deflateInit2(), and
- returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
- */
-
-ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
- uLong sourceLen));
-/*
- deflateBound() returns an upper bound on the compressed size after
- deflation of sourceLen bytes. It must be called after deflateInit()
- or deflateInit2(). This would be used to allocate an output buffer
- for deflation in a single pass, and so would be called before deflate().
-*/
-
-ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
- int bits,
- int value));
-/*
- deflatePrime() inserts bits in the deflate output stream. The intent
- is that this function is used to start off the deflate output with the
- bits leftover from a previous deflate stream when appending to it. As such,
- this function can only be used for raw deflate, and must be used before the
- first deflate() call after a deflateInit2() or deflateReset(). bits must be
- less than or equal to 16, and that many of the least significant bits of
- value will be inserted in the output.
-
- deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent.
-*/
-
-ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
- gz_headerp head));
-/*
- deflateSetHeader() provides gzip header information for when a gzip
- stream is requested by deflateInit2(). deflateSetHeader() may be called
- after deflateInit2() or deflateReset() and before the first call of
- deflate(). The text, time, os, extra field, name, and comment information
- in the provided gz_header structure are written to the gzip header (xflag is
- ignored -- the extra flags are set according to the compression level). The
- caller must assure that, if not Z_NULL, name and comment are terminated with
- a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
- available there. If hcrc is true, a gzip header crc is included. Note that
- the current versions of the command-line version of gzip (up through version
- 1.3.x) do not support header crc's, and will report that it is a "multi-part
- gzip file" and give up.
-
- If deflateSetHeader is not used, the default gzip header has text false,
- the time set to zero, and os set to 255, with no extra, name, or comment
- fields. The gzip header is returned to the default state by deflateReset().
-
- deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
- int windowBits));
-
- This is another version of inflateInit with an extra parameter. The
- fields next_in, avail_in, zalloc, zfree and opaque must be initialized
- before by the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library. The default value is 15 if inflateInit is used
- instead. windowBits must be greater than or equal to the windowBits value
- provided to deflateInit2() while compressing, or it must be equal to 15 if
- deflateInit2() was not used. If a compressed stream with a larger window
- size is given as input, inflate() will return with the error code
- Z_DATA_ERROR instead of trying to allocate a larger window.
-
- windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
- determines the window size. inflate() will then process raw deflate data,
- not looking for a zlib or gzip header, not generating a check value, and not
- looking for any check values for comparison at the end of the stream. This
- is for use with other formats that use the deflate compressed data format
- such as zip. Those formats provide their own check values. If a custom
- format is developed using the raw deflate format for compressed data, it is
- recommended that a check value such as an adler32 or a crc32 be applied to
- the uncompressed data as is done in the zlib, gzip, and zip formats. For
- most applications, the zlib format should be used as is. Note that comments
- above on the use in deflateInit2() applies to the magnitude of windowBits.
-
- windowBits can also be greater than 15 for optional gzip decoding. Add
- 32 to windowBits to enable zlib and gzip decoding with automatic header
- detection, or add 16 to decode only the gzip format (the zlib format will
- return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is
- a crc32 instead of an adler32.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
- is set to null if there is no error message. inflateInit2 does not perform
- any decompression apart from reading the zlib header if present: this will
- be done by inflate(). (So next_in and avail_in may be modified, but next_out
- and avail_out are unchanged.)
-*/
-
-ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of inflate,
- if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
- can be determined from the adler32 value returned by that call of inflate.
- The compressor and decompressor must use exactly the same dictionary (see
- deflateSetDictionary). For raw inflate, this function can be called
- immediately after inflateInit2() or inflateReset() and before any call of
- inflate() to set the dictionary. The application must insure that the
- dictionary that was used for compression is provided.
-
- inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
- inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect adler32 value). inflateSetDictionary does not
- perform any decompression: this will be done by subsequent calls of
- inflate().
-*/
-
-ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
-/*
- Skips invalid compressed data until a full flush point (see above the
- description of deflate with Z_FULL_FLUSH) can be found, or until all
- available input is skipped. No output is provided.
-
- inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no flush point has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
-*/
-
-ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
- z_streamp source));
-/*
- Sets the destination stream as a complete copy of the source stream.
-
- This function can be useful when randomly accessing a large stream. The
- first pass through the stream can periodically record the inflate state,
- allowing restarting inflate at those points when randomly accessing the
- stream.
-
- inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
- destination.
-*/
-
-ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
- int bits,
- int value));
-/*
- This function inserts bits in the inflate input stream. The intent is
- that this function is used to start inflating at a bit position in the
- middle of a byte. The provided bits will be used before any bytes are used
- from next_in. This function should only be used with raw inflate, and
- should be used before the first inflate() call after inflateInit2() or
- inflateReset(). bits must be less than or equal to 16, and that many of the
- least significant bits of value will be inserted in the input.
-
- inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent.
-*/
-
-ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
- gz_headerp head));
-/*
- inflateGetHeader() requests that gzip header information be stored in the
- provided gz_header structure. inflateGetHeader() may be called after
- inflateInit2() or inflateReset(), and before the first call of inflate().
- As inflate() processes the gzip stream, head->done is zero until the header
- is completed, at which time head->done is set to one. If a zlib stream is
- being decoded, then head->done is set to -1 to indicate that there will be
- no gzip header information forthcoming. Note that Z_BLOCK can be used to
- force inflate() to return immediately after header processing is complete
- and before any actual data is decompressed.
-
- The text, time, xflags, and os fields are filled in with the gzip header
- contents. hcrc is set to true if there is a header CRC. (The header CRC
- was valid if done is set to one.) If extra is not Z_NULL, then extra_max
- contains the maximum number of bytes to write to extra. Once done is true,
- extra_len contains the actual extra field length, and extra contains the
- extra field, or that field truncated if extra_max is less than extra_len.
- If name is not Z_NULL, then up to name_max characters are written there,
- terminated with a zero unless the length is greater than name_max. If
- comment is not Z_NULL, then up to comm_max characters are written there,
- terminated with a zero unless the length is greater than comm_max. When
- any of extra, name, or comment are not Z_NULL and the respective field is
- not present in the header, then that field is set to Z_NULL to signal its
- absence. This allows the use of deflateSetHeader() with the returned
- structure to duplicate the header. However if those fields are set to
- allocated memory, then the application will need to save those pointers
- elsewhere so that they can be eventually freed.
-
- If inflateGetHeader is not used, then the header information is simply
- discarded. The header is always checked for validity, including the header
- CRC if present. inflateReset() will reset the process to discard the header
- information. The application would need to call inflateGetHeader() again to
- retrieve the header from the next gzip stream.
-
- inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
- unsigned char FAR *window));
-
- Initialize the internal stream state for decompression using inflateBack()
- calls. The fields zalloc, zfree and opaque in strm must be initialized
- before the call. If zalloc and zfree are Z_NULL, then the default library-
- derived memory allocation routines are used. windowBits is the base two
- logarithm of the window size, in the range 8..15. window is a caller
- supplied buffer of that size. Except for special applications where it is
- assured that deflate was used with small window sizes, windowBits must be 15
- and a 32K byte window must be supplied to be able to decompress general
- deflate streams.
-
- See inflateBack() for the usage of these routines.
-
- inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
- the paramaters are invalid, Z_MEM_ERROR if the internal state could not
- be allocated, or Z_VERSION_ERROR if the version of the library does not
- match the version of the header file.
-*/
-
-typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
-typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
-
-ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
- in_func in, void FAR *in_desc,
- out_func out, void FAR *out_desc));
-/*
- inflateBack() does a raw inflate with a single call using a call-back
- interface for input and output. This is more efficient than inflate() for
- file i/o applications in that it avoids copying between the output and the
- sliding window by simply making the window itself the output buffer. This
- function trusts the application to not change the output buffer passed by
- the output function, at least until inflateBack() returns.
-
- inflateBackInit() must be called first to allocate the internal state
- and to initialize the state with the user-provided window buffer.
- inflateBack() may then be used multiple times to inflate a complete, raw
- deflate stream with each call. inflateBackEnd() is then called to free
- the allocated state.
-
- A raw deflate stream is one with no zlib or gzip header or trailer.
- This routine would normally be used in a utility that reads zip or gzip
- files and writes out uncompressed files. The utility would decode the
- header and process the trailer on its own, hence this routine expects
- only the raw deflate stream to decompress. This is different from the
- normal behavior of inflate(), which expects either a zlib or gzip header and
- trailer around the deflate stream.
-
- inflateBack() uses two subroutines supplied by the caller that are then
- called by inflateBack() for input and output. inflateBack() calls those
- routines until it reads a complete deflate stream and writes out all of the
- uncompressed data, or until it encounters an error. The function's
- parameters and return types are defined above in the in_func and out_func
- typedefs. inflateBack() will call in(in_desc, &buf) which should return the
- number of bytes of provided input, and a pointer to that input in buf. If
- there is no input available, in() must return zero--buf is ignored in that
- case--and inflateBack() will return a buffer error. inflateBack() will call
- out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
- should return zero on success, or non-zero on failure. If out() returns
- non-zero, inflateBack() will return with an error. Neither in() nor out()
- are permitted to change the contents of the window provided to
- inflateBackInit(), which is also the buffer that out() uses to write from.
- The length written by out() will be at most the window size. Any non-zero
- amount of input may be provided by in().
-
- For convenience, inflateBack() can be provided input on the first call by
- setting strm->next_in and strm->avail_in. If that input is exhausted, then
- in() will be called. Therefore strm->next_in must be initialized before
- calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
- immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
- must also be initialized, and then if strm->avail_in is not zero, input will
- initially be taken from strm->next_in[0 .. strm->avail_in - 1].
-
- The in_desc and out_desc parameters of inflateBack() is passed as the
- first parameter of in() and out() respectively when they are called. These
- descriptors can be optionally used to pass any information that the caller-
- supplied in() and out() functions need to do their job.
-
- On return, inflateBack() will set strm->next_in and strm->avail_in to
- pass back any unused input that was provided by the last in() call. The
- return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
- if in() or out() returned an error, Z_DATA_ERROR if there was a format
- error in the deflate stream (in which case strm->msg is set to indicate the
- nature of the error), or Z_STREAM_ERROR if the stream was not properly
- initialized. In the case of Z_BUF_ERROR, an input or output error can be
- distinguished using strm->next_in which will be Z_NULL only if in() returned
- an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to
- out() returning non-zero. (in() will always be called before out(), so
- strm->next_in is assured to be defined if out() returns non-zero.) Note
- that inflateBack() cannot return Z_OK.
-*/
-
-ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
-/*
- All memory allocated by inflateBackInit() is freed.
-
- inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
- state was inconsistent.
-*/
-
-ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
-/* Return flags indicating compile-time options.
-
- Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
- 1.0: size of uInt
- 3.2: size of uLong
- 5.4: size of voidpf (pointer)
- 7.6: size of z_off_t
-
- Compiler, assembler, and debug options:
- 8: DEBUG
- 9: ASMV or ASMINF -- use ASM code
- 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
- 11: 0 (reserved)
-
- One-time table building (smaller code, but not thread-safe if true):
- 12: BUILDFIXED -- build static block decoding tables when needed
- 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
- 14,15: 0 (reserved)
-
- Library content (indicates missing functionality):
- 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
- deflate code when not needed)
- 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
- and decode gzip streams (to avoid linking crc code)
- 18-19: 0 (reserved)
-
- Operation variations (changes in library functionality):
- 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
- 21: FASTEST -- deflate algorithm with only one, lowest compression level
- 22,23: 0 (reserved)
-
- The sprintf variant used by gzprintf (zero is best):
- 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
- 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
- 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
-
- Remainder:
- 27-31: 0 (reserved)
- */
-
-
- /* utility functions */
-
-/*
- The following utility functions are implemented on top of the
- basic stream-oriented functions. To simplify the interface, some
- default options are assumed (compression level and memory usage,
- standard memory allocation functions). The source code of these
- utility functions can easily be modified if you need special options.
-*/
-
-ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be at least the value returned
- by compressBound(sourceLen). Upon exit, destLen is the actual size of the
- compressed buffer.
- This function can be used to compress a whole file at once if the
- input file is mmap'ed.
- compress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer.
-*/
-
-ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen,
- int level));
-/*
- Compresses the source buffer into the destination buffer. The level
- parameter has the same meaning as in deflateInit. sourceLen is the byte
- length of the source buffer. Upon entry, destLen is the total size of the
- destination buffer, which must be at least the value returned by
- compressBound(sourceLen). Upon exit, destLen is the actual size of the
- compressed buffer.
-
- compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_BUF_ERROR if there was not enough room in the output buffer,
- Z_STREAM_ERROR if the level parameter is invalid.
-*/
-
-ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
-/*
- compressBound() returns an upper bound on the compressed size after
- compress() or compress2() on sourceLen bytes. It would be used before
- a compress() or compress2() call to allocate the destination buffer.
-*/
-
-ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer.
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
-
- uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
-*/
-
-
-typedef voidp gzFile;
-
-ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
-/*
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb") but can also include a compression level
- ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
- Huffman only compression as in "wb1h", or 'R' for run-length encoding
- as in "wb1R". (See the description of deflateInit2 for more information
- about the strategy parameter.)
-
- gzopen can be used to read a file which is not in gzip format; in this
- case gzread will directly read from the file without decompression.
-
- gzopen returns NULL if the file could not be opened or if there was
- insufficient memory to allocate the (de)compression state; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is Z_MEM_ERROR). */
-
-ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
-/*
- gzdopen() associates a gzFile with the file descriptor fd. File
- descriptors are obtained from calls like open, dup, creat, pipe or
- fileno (in the file has been previously opened with fopen).
- The mode parameter is as in gzopen.
- The next call of gzclose on the returned gzFile will also close the
- file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
- descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
- gzdopen returns NULL if there was insufficient memory to allocate
- the (de)compression state.
-*/
-
-ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
-/*
- Dynamically update the compression level or strategy. See the description
- of deflateInit2 for the meaning of these parameters.
- gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
- opened for writing.
-*/
-
-ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
-/*
- Reads the given number of uncompressed bytes from the compressed file.
- If the input file was not in gzip format, gzread copies the given number
- of bytes into the buffer.
- gzread returns the number of uncompressed bytes actually read (0 for
- end of file, -1 for error). */
-
-ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
- voidpc buf, unsigned len));
-/*
- Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of uncompressed bytes actually written
- (0 in case of error).
-*/
-
-ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
-/*
- Converts, formats, and writes the args to the compressed file under
- control of the format string, as in fprintf. gzprintf returns the number of
- uncompressed bytes actually written (0 in case of error). The number of
- uncompressed bytes written is limited to 4095. The caller should assure that
- this limit is not exceeded. If it is exceeded, then gzprintf() will return
- return an error (0) with nothing written. In this case, there may also be a
- buffer overflow with unpredictable consequences, which is possible only if
- zlib was compiled with the insecure functions sprintf() or vsprintf()
- because the secure snprintf() or vsnprintf() functions were not available.
-*/
-
-ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
-/*
- Writes the given null-terminated string to the compressed file, excluding
- the terminating null character.
- gzputs returns the number of characters written, or -1 in case of error.
-*/
-
-ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
-/*
- Reads bytes from the compressed file until len-1 characters are read, or
- a newline character is read and transferred to buf, or an end-of-file
- condition is encountered. The string is then terminated with a null
- character.
- gzgets returns buf, or Z_NULL in case of error.
-*/
-
-ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
-/*
- Writes c, converted to an unsigned char, into the compressed file.
- gzputc returns the value that was written, or -1 in case of error.
-*/
-
-ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
-/*
- Reads one byte from the compressed file. gzgetc returns this byte
- or -1 in case of end of file or error.
-*/
-
-ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
-/*
- Push one character back onto the stream to be read again later.
- Only one character of push-back is allowed. gzungetc() returns the
- character pushed, or -1 on failure. gzungetc() will fail if a
- character has been pushed but not read yet, or if c is -1. The pushed
- character will be discarded if the stream is repositioned with gzseek()
- or gzrewind().
-*/
-
-ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
-/*
- Flushes all pending output into the compressed file. The parameter
- flush is as in the deflate() function. The return value is the zlib
- error number (see function gzerror below). gzflush returns Z_OK if
- the flush parameter is Z_FINISH and all output could be flushed.
- gzflush should be called only when strictly necessary because it can
- degrade compression.
-*/
-
-ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
- z_off_t offset, int whence));
-/*
- Sets the starting position for the next gzread or gzwrite on the
- given compressed file. The offset represents a number of bytes in the
- uncompressed data stream. The whence parameter is defined as in lseek(2);
- the value SEEK_END is not supported.
- If the file is opened for reading, this function is emulated but can be
- extremely slow. If the file is opened for writing, only forward seeks are
- supported; gzseek then compresses a sequence of zeroes up to the new
- starting position.
-
- gzseek returns the resulting offset location as measured in bytes from
- the beginning of the uncompressed stream, or -1 in case of error, in
- particular if the file is opened for writing and the new starting position
- would be before the current position.
-*/
-
-ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
-/*
- Rewinds the given file. This function is supported only for reading.
-
- gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
-*/
-
-ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
-/*
- Returns the starting position for the next gzread or gzwrite on the
- given compressed file. This position represents a number of bytes in the
- uncompressed data stream.
-
- gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
-*/
-
-ZEXTERN int ZEXPORT gzeof OF((gzFile file));
-/*
- Returns 1 when EOF has previously been detected reading the given
- input stream, otherwise zero.
-*/
-
-ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
-/*
- Returns 1 if file is being read directly without decompression, otherwise
- zero.
-*/
-
-ZEXTERN int ZEXPORT gzclose OF((gzFile file));
-/*
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression state. The return value is the zlib
- error number (see function gzerror below).
-*/
-
-ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
-/*
- Returns the error message for the last error which occurred on the
- given compressed file. errnum is set to zlib error number. If an
- error occurred in the file system and not in the compression library,
- errnum is set to Z_ERRNO and the application may consult errno
- to get the exact error code.
-*/
-
-ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
-/*
- Clears the error and end-of-file flags for file. This is analogous to the
- clearerr() function in stdio. This is useful for continuing to read a gzip
- file that is being written concurrently.
-*/
-
- /* checksum functions */
-
-/*
- These functions are not related to compression but are exported
- anyway because they might be useful in applications using the
- compression library.
-*/
-
-ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-/*
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
-
- uLong adler = adler32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- adler = adler32(adler, buffer, length);
- }
- if (adler != original_adler) error();
-*/
-
-ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
- z_off_t len2));
-/*
- Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
- and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
- each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
- seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
-*/
-
-ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
-/*
- Update a running CRC-32 with the bytes buf[0..len-1] and return the
- updated CRC-32. If buf is NULL, this function returns the required initial
- value for the for the crc. Pre- and post-conditioning (one's complement) is
- performed within this function so it shouldn't be done by the application.
- Usage example:
-
- uLong crc = crc32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- crc = crc32(crc, buffer, length);
- }
- if (crc != original_crc) error();
-*/
-
-ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
-
-/*
- Combine two CRC-32 check values into one. For two sequences of bytes,
- seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
- calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
- check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
- len2.
-*/
-
-
- /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
- const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
- const char *version, int stream_size));
-ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
- int windowBits, int memLevel,
- int strategy, const char *version,
- int stream_size));
-ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
- const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
- unsigned char FAR *window,
- const char *version,
- int stream_size));
-#define deflateInit(strm, level) \
- deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
- inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
- deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
- (strategy), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
- inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-#define inflateBackInit(strm, windowBits, window) \
- inflateBackInit_((strm), (windowBits), (window), \
- ZLIB_VERSION, sizeof(z_stream))
-
-
-#if !defined(_ZUTIL_H) && !defined(NO_DUMMY_DECL)
- struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-ZEXTERN const char * ZEXPORT zError OF((int));
-ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z));
-ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZLIB_H */
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c
@@ -1,113 +0,0 @@
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License (the "License").
- * You may not use this file except in compliance with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-
-/*
- * Copyright 2008 Sun Microsystems, Inc. All rights reserved.
- * Use is subject to license terms.
- */
-
-#include <sys/types.h>
-#include <sys/zmod.h>
-
-#include "zlib.h"
-#include "zutil.h"
-
-/*
- * Uncompress the buffer 'src' into the buffer 'dst'. The caller must store
- * the expected decompressed data size externally so it can be passed in.
- * The resulting decompressed size is then returned through dstlen. This
- * function return Z_OK on success, or another error code on failure.
- */
-int
-z_uncompress(void *dst, size_t *dstlen, const void *src, size_t srclen)
-{
- z_stream zs;
- int err;
-
- bzero(&zs, sizeof (zs));
- zs.next_in = (uchar_t *)src;
- zs.avail_in = srclen;
- zs.next_out = dst;
- zs.avail_out = *dstlen;
-
- /*
- * Call inflateInit2() specifying a window size of DEF_WBITS
- * with the 6th bit set to indicate that the compression format
- * type (zlib or gzip) should be automatically detected.
- */
- if ((err = inflateInit2(&zs, DEF_WBITS | 0x20)) != Z_OK)
- return (err);
-
- if ((err = inflate(&zs, Z_FINISH)) != Z_STREAM_END) {
- (void) inflateEnd(&zs);
- return (err == Z_OK ? Z_BUF_ERROR : err);
- }
-
- *dstlen = zs.total_out;
- return (inflateEnd(&zs));
-}
-
-int
-z_compress_level(void *dst, size_t *dstlen, const void *src, size_t srclen,
- int level)
-{
-
- z_stream zs;
- int err;
-
- bzero(&zs, sizeof (zs));
- zs.next_in = (uchar_t *)src;
- zs.avail_in = srclen;
- zs.next_out = dst;
- zs.avail_out = *dstlen;
-
- if ((err = deflateInit(&zs, level)) != Z_OK)
- return (err);
-
- if ((err = deflate(&zs, Z_FINISH)) != Z_STREAM_END) {
- (void) deflateEnd(&zs);
- return (err == Z_OK ? Z_BUF_ERROR : err);
- }
-
- *dstlen = zs.total_out;
- return (deflateEnd(&zs));
-}
-
-int
-z_compress(void *dst, size_t *dstlen, const void *src, size_t srclen)
-{
- return (z_compress_level(dst, dstlen, src, srclen,
- Z_DEFAULT_COMPRESSION));
-}
-
-/*
- * Convert a zlib error code into a string error message.
- */
-const char *
-z_strerror(int err)
-{
- int i = Z_NEED_DICT - err;
-
- if (i < 0 || i > Z_NEED_DICT - Z_VERSION_ERROR)
- return ("unknown error");
-
- return (zError(err));
-}
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c
@@ -1,84 +0,0 @@
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License (the "License").
- * You may not use this file except in compliance with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-
-/*
- * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
- * Use is subject to license terms.
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#include <sys/systm.h>
-#include <sys/cmn_err.h>
-#include <sys/kobj.h>
-
-struct zchdr {
- uint_t zch_magic;
- uint_t zch_size;
-};
-
-#define ZCH_MAGIC 0x3cc13cc1
-
-/*ARGSUSED*/
-void *
-zcalloc(void *opaque, uint_t items, uint_t size)
-{
- size_t nbytes = sizeof (struct zchdr) + items * size;
- struct zchdr *z = kobj_zalloc(nbytes, KM_NOWAIT|KM_TMP);
-
- if (z == NULL)
- return (NULL);
-
- z->zch_magic = ZCH_MAGIC;
- z->zch_size = nbytes;
-
- return (z + 1);
-}
-
-/*ARGSUSED*/
-void
-zcfree(void *opaque, void *ptr)
-{
- struct zchdr *z = ((struct zchdr *)ptr) - 1;
-
- if (z->zch_magic != ZCH_MAGIC)
- panic("zcfree region corrupt: hdr=%p ptr=%p", (void *)z, ptr);
-
- kobj_free(z, z->zch_size);
-}
-
-void
-zmemcpy(void *dest, const void *source, uint_t len)
-{
- bcopy(source, dest, len);
-}
-
-int
-zmemcmp(const void *s1, const void *s2, uint_t len)
-{
- return (bcmp(s1, s2, len));
-}
-
-void
-zmemzero(void *dest, uint_t len)
-{
- bzero(dest, len);
-}
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h
@@ -1,274 +0,0 @@
-/*
- * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
- * Use is subject to license terms.
- */
-
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2005 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _ZUTIL_H
-#define _ZUTIL_H
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#define ZLIB_INTERNAL
-#include "zlib.h"
-
-#ifdef STDC
-# ifndef _WIN32_WCE
-# include <stddef.h>
-# endif
-# include <string.h>
-# include <stdlib.h>
-#endif
-#ifdef NO_ERRNO_H
-# ifdef _WIN32_WCE
- /* The Microsoft C Run-Time Library for Windows CE doesn't have
- * errno. We define it as a global variable to simplify porting.
- * Its value is always 0 and should not be used. We rename it to
- * avoid conflict with other libraries that use the same workaround.
- */
-# define errno z_errno
-# endif
- extern int errno;
-#else
-# ifndef _WIN32_WCE
-# include <sys/errno.h>
-# endif
-#endif
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long ulg;
-
-extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
- return (strm->msg = (char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
- /* common constants */
-
-#ifndef DEF_WBITS
-# define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES 2
-/* The three kinds of block type */
-
-#define MIN_MATCH 3
-#define MAX_MATCH 258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
- /* target dependencies */
-
-#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
-# define OS_CODE 0x00
-# if defined(__TURBOC__) || defined(__BORLANDC__)
-# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
- /* Allow compilation with ANSI keywords only enabled */
- void _Cdecl farfree( void *block );
- void *_Cdecl farmalloc( unsigned long nbytes );
-# else
-# include <alloc.h>
-# endif
-# else /* MSC or DJGPP */
-# include <malloc.h>
-# endif
-#endif
-
-#ifdef AMIGA
-# define OS_CODE 0x01
-#endif
-
-#if defined(VAXC) || defined(VMS)
-# define OS_CODE 0x02
-# define F_OPEN(name, mode) \
- fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#if defined(ATARI) || defined(atarist)
-# define OS_CODE 0x05
-#endif
-
-#ifdef OS2
-# define OS_CODE 0x06
-# ifdef M_I86
- #include <malloc.h>
-# endif
-#endif
-
-#if defined(MACOS) || defined(TARGET_OS_MAC)
-# define OS_CODE 0x07
-# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-# include <unix.h> /* for fdopen */
-# else
-# ifndef fdopen
-# define fdopen(fd,mode) NULL /* No fdopen() */
-# endif
-# endif
-#endif
-
-#ifdef TOPS20
-# define OS_CODE 0x0a
-#endif
-
-#ifdef WIN32
-# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */
-# define OS_CODE 0x0b
-# endif
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-# define OS_CODE 0x0f
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-# define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
-#if (defined(_MSC_VER) && (_MSC_VER > 600))
-# if defined(_WIN32_WCE)
-# define fdopen(fd,mode) NULL /* No fdopen() */
-# ifndef _PTRDIFF_T_DEFINED
- typedef int ptrdiff_t;
-# define _PTRDIFF_T_DEFINED
-# endif
-# else
-# define fdopen(fd,type) _fdopen(fd,type)
-# endif
-#endif
-
- /* common defaults */
-
-#ifndef OS_CODE
-# define OS_CODE 0x03 /* assume Unix */
-#endif
-
-#ifndef F_OPEN
-# define F_OPEN(name, mode) fopen((name), (mode))
-#endif
-
- /* functions */
-
-#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
-# ifndef HAVE_VSNPRINTF
-# define HAVE_VSNPRINTF
-# endif
-#endif
-#if defined(__CYGWIN__)
-# ifndef HAVE_VSNPRINTF
-# define HAVE_VSNPRINTF
-# endif
-#endif
-#ifndef HAVE_VSNPRINTF
-# ifdef MSDOS
- /* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
- but for now we just assume it doesn't. */
-# define NO_vsnprintf
-# endif
-# ifdef __TURBOC__
-# define NO_vsnprintf
-# endif
-# ifdef WIN32
- /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
-# if !defined(vsnprintf) && !defined(NO_vsnprintf)
-# define vsnprintf _vsnprintf
-# endif
-# endif
-# ifdef __SASC
-# define NO_vsnprintf
-# endif
-#endif
-#ifdef VMS
-# define NO_vsnprintf
-#endif
-
-#if defined(pyr)
-# define NO_MEMCPY
-#endif
-#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
- /* Use our own functions for small and medium model with MSC <= 5.0.
- * You may have to use the same strategy for Borland C (untested).
- * The __SC__ check is for Symantec.
- */
-# define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-# define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-# define zmemcpy _fmemcpy
-# define zmemcmp _fmemcmp
-# define zmemzero(dest, len) _fmemset(dest, 0, len)
-# else
-# define zmemcpy memcpy
-# define zmemcmp memcmp
-# define zmemzero(dest, len) memset(dest, 0, len)
-# endif
-#else
- extern void zmemcpy OF((void* dest, const void* source, uInt len));
- extern int zmemcmp OF((const void* s1, const void* s2, uInt len));
- extern void zmemzero OF((void* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# include <stdio.h>
- extern int z_verbose;
- extern void z_error OF((char *m));
-# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-# define Trace(x) {if (z_verbose>=0) fprintf x ;}
-# define Tracev(x) {if (z_verbose>0) fprintf x ;}
-# define Tracevv(x) {if (z_verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void zcfree OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
- (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* _ZUTIL_H */
Index: sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c
===================================================================
--- sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c
+++ sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c
@@ -1,324 +0,0 @@
-/*
- * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
- * Use is subject to license terms.
- */
-
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#pragma ident "%Z%%M% %I% %E% SMI"
-
-#include "zutil.h"
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-const char * const z_errmsg[10] = {
-"need dictionary", /* Z_NEED_DICT 2 */
-"stream end", /* Z_STREAM_END 1 */
-"", /* Z_OK 0 */
-"file error", /* Z_ERRNO (-1) */
-"stream error", /* Z_STREAM_ERROR (-2) */
-"data error", /* Z_DATA_ERROR (-3) */
-"insufficient memory", /* Z_MEM_ERROR (-4) */
-"buffer error", /* Z_BUF_ERROR (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-
-const char * ZEXPORT zlibVersion()
-{
- return ZLIB_VERSION;
-}
-
-uLong ZEXPORT zlibCompileFlags()
-{
- uLong flags;
-
- flags = 0;
- switch (sizeof(uInt)) {
- case 2: break;
- case 4: flags += 1; break;
- case 8: flags += 2; break;
- default: flags += 3;
- }
- switch (sizeof(uLong)) {
- case 2: break;
- case 4: flags += 1 << 2; break;
- case 8: flags += 2 << 2; break;
- default: flags += 3 << 2;
- }
- switch (sizeof(voidpf)) {
- case 2: break;
- case 4: flags += 1 << 4; break;
- case 8: flags += 2 << 4; break;
- default: flags += 3 << 4;
- }
- switch (sizeof(z_off_t)) {
- case 2: break;
- case 4: flags += 1 << 6; break;
- case 8: flags += 2 << 6; break;
- default: flags += 3 << 6;
- }
-#ifdef DEBUG
- flags += 1 << 8;
-#endif
-#if defined(ASMV) || defined(ASMINF)
- flags += 1 << 9;
-#endif
-#ifdef ZLIB_WINAPI
- flags += 1 << 10;
-#endif
-#ifdef BUILDFIXED
- flags += 1 << 12;
-#endif
-#ifdef DYNAMIC_CRC_TABLE
- flags += 1 << 13;
-#endif
-#ifdef NO_GZCOMPRESS
- flags += 1L << 16;
-#endif
-#ifdef NO_GZIP
- flags += 1L << 17;
-#endif
-#ifdef PKZIP_BUG_WORKAROUND
- flags += 1L << 20;
-#endif
-#ifdef FASTEST
- flags += 1L << 21;
-#endif
-#ifdef STDC
-# ifdef NO_vsnprintf
- flags += 1L << 25;
-# ifdef HAS_vsprintf_void
- flags += 1L << 26;
-# endif
-# else
-# ifdef HAS_vsnprintf_void
- flags += 1L << 26;
-# endif
-# endif
-#else
- flags += 1L << 24;
-# ifdef NO_snprintf
- flags += 1L << 25;
-# ifdef HAS_sprintf_void
- flags += 1L << 26;
-# endif
-# else
-# ifdef HAS_snprintf_void
- flags += 1L << 26;
-# endif
-# endif
-#endif
- return flags;
-}
-
-#ifdef DEBUG
-
-# ifndef verbose
-# define verbose 0
-# endif
-int z_verbose = verbose;
-
-void z_error (m)
- char *m;
-{
- fprintf(stderr, "%s\n", m);
- exit(1);
-}
-#endif
-
-/* exported to allow conversion of error code to string for compress() and
- * uncompress()
- */
-const char * ZEXPORT zError(err)
- int err;
-{
- return ERR_MSG(err);
-}
-
-#if defined(_WIN32_WCE)
- /* The Microsoft C Run-Time Library for Windows CE doesn't have
- * errno. We define it as a global variable to simplify porting.
- * Its value is always 0 and should not be used.
- */
- int errno = 0;
-#endif
-
-#define HAVE_MEMCPY
-#ifndef HAVE_MEMCPY
-
-void zmemcpy(dest, source, len)
- Bytef* dest;
- const Bytef* source;
- uInt len;
-{
- if (len == 0) return;
- do {
- *dest++ = *source++; /* ??? to be unrolled */
- } while (--len != 0);
-}
-
-int zmemcmp(s1, s2, len)
- const Bytef* s1;
- const Bytef* s2;
- uInt len;
-{
- uInt j;
-
- for (j = 0; j < len; j++) {
- if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
- }
- return 0;
-}
-
-void zmemzero(dest, len)
- Bytef* dest;
- uInt len;
-{
- if (len == 0) return;
- do {
- *dest++ = 0; /* ??? to be unrolled */
- } while (--len != 0);
-}
-#endif
-
-
-#ifdef SYS16BIT
-
-#ifdef __TURBOC__
-/* Turbo C in 16-bit mode */
-
-# define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
- voidpf org_ptr;
- voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
- voidpf buf = opaque; /* just to make some compilers happy */
- ulg bsize = (ulg)items*size;
-
- /* If we allocate less than 65520 bytes, we assume that farmalloc
- * will return a usable pointer which doesn't have to be normalized.
- */
- if (bsize < 65520L) {
- buf = farmalloc(bsize);
- if (*(ush*)&buf != 0) return buf;
- } else {
- buf = farmalloc(bsize + 16L);
- }
- if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
- table[next_ptr].org_ptr = buf;
-
- /* Normalize the pointer to seg:0 */
- *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
- *(ush*)&buf = 0;
- table[next_ptr++].new_ptr = buf;
- return buf;
-}
-
-void zcfree (voidpf opaque, voidpf ptr)
-{
- int n;
- if (*(ush*)&ptr != 0) { /* object < 64K */
- farfree(ptr);
- return;
- }
- /* Find the original pointer */
- for (n = 0; n < next_ptr; n++) {
- if (ptr != table[n].new_ptr) continue;
-
- farfree(table[n].org_ptr);
- while (++n < next_ptr) {
- table[n-1] = table[n];
- }
- next_ptr--;
- return;
- }
- ptr = opaque; /* just to make some compilers happy */
- Assert(0, "zcfree: ptr not found");
-}
-
-#endif /* __TURBOC__ */
-
-
-#ifdef M_I86
-/* Microsoft C in 16-bit mode */
-
-# define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
-# define _halloc halloc
-# define _hfree hfree
-#endif
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
- if (opaque) opaque = 0; /* to make compiler happy */
- return _halloc((long)items, size);
-}
-
-void zcfree (voidpf opaque, voidpf ptr)
-{
- if (opaque) opaque = 0; /* to make compiler happy */
- _hfree(ptr);
-}
-
-#endif /* M_I86 */
-
-#endif /* SYS16BIT */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp malloc OF((uInt size));
-extern voidp calloc OF((uInt items, uInt size));
-extern void free OF((voidpf ptr));
-#endif
-
-voidpf zcalloc (opaque, items, size)
- voidpf opaque;
- unsigned items;
- unsigned size;
-{
- if (opaque) items += size - size; /* make compiler happy */
- return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
- (voidpf)calloc(items, size);
-}
-
-void zcfree (opaque, ptr)
- voidpf opaque;
- voidpf ptr;
-{
- free(ptr);
- if (opaque) return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
Index: sys/conf/files
===================================================================
--- sys/conf/files
+++ sys/conf/files
@@ -271,16 +271,6 @@
cddl/contrib/opensolaris/uts/common/os/fm.c optional zfs compile-with "${ZFS_C}"
cddl/contrib/opensolaris/uts/common/os/list.c optional zfs compile-with "${ZFS_C}"
cddl/contrib/opensolaris/uts/common/os/nvpair_alloc_system.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/adler32.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/deflate.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/inffast.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/inflate.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/inftrees.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/trees.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/zmod.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c optional zfs compile-with "${ZFS_C}"
-cddl/contrib/opensolaris/uts/common/zmod/zutil.c optional zfs compile-with "${ZFS_C}"
# zfs lua support
cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lapi.c optional zfs compile-with "${ZFS_C}"
cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lauxlib.c optional zfs compile-with "${ZFS_C}"
@@ -2458,7 +2448,8 @@
compile-with "${NORMAL_FW}" \
no-obj no-implicit-rule \
clean "mwlboot.fw"
-dev/mxge/if_mxge.c optional mxge pci
+dev/mxge/if_mxge.c optional mxge pci \
+ compile-with "${ZLIB_C}"
dev/mxge/mxge_eth_z8e.c optional mxge pci
dev/mxge/mxge_ethp_z8e.c optional mxge pci
dev/mxge/mxge_rss_eth_z8e.c optional mxge pci
@@ -3674,7 +3665,8 @@
geom/uzip/g_uzip.c optional geom_uzip
geom/uzip/g_uzip_lzma.c optional geom_uzip
geom/uzip/g_uzip_wrkthr.c optional geom_uzip
-geom/uzip/g_uzip_zlib.c optional geom_uzip
+geom/uzip/g_uzip_zlib.c optional geom_uzip \
+ compile-with "${ZLIB_C}"
geom/vinum/geom_vinum.c optional geom_vinum
geom/vinum/geom_vinum_create.c optional geom_vinum
geom/vinum/geom_vinum_drive.c optional geom_vinum
@@ -3817,7 +3809,8 @@
kern/kern_umtx.c standard
kern/kern_uuid.c standard
kern/kern_xxx.c standard
-kern/link_elf.c standard
+kern/link_elf.c standard \
+ compile-with "${ZLIB_C}"
kern/linker_if.m standard
kern/md4c.c optional netsmb
kern/md5c.c standard
@@ -3839,7 +3832,7 @@
kern/subr_capability.c standard
kern/subr_clock.c standard
kern/subr_compressor.c standard \
- compile-with "${NORMAL_C} -I$S/contrib/zstd/lib/freebsd"
+ compile-with "${ZLIB_C}"
kern/subr_coverage.c optional coverage \
compile-with "${NORMAL_C:N-fsanitize*}"
kern/subr_counter.c standard
@@ -4043,8 +4036,30 @@
libkern/strtouq.c standard
libkern/strvalid.c standard
libkern/timingsafe_bcmp.c standard
-libkern/zlib.c optional crypto | geom_uzip | ipsec | \
- ipsec_support | mxge | netgraph_deflate | ddb_ctf | gzio
+../contrib/zlib/adler32.c optional crypto | geom_uzip | ipsec | \
+ ipsec_support | mxge | ddb_ctf | gzio \
+ compile-with "${ZLIB_C} -Wno-cast-qual"
+../contrib/zlib/deflate.c optional crypto | geom_uzip | ipsec | \
+ ipsec_support | mxge | ddb_ctf | gzio \
+ compile-with "${ZLIB_C} -Wno-cast-qual"
+../contrib/zlib/inffast.c optional crypto | geom_uzip | ipsec | \
+ ipsec_support | mxge | ddb_ctf | gzio \
+ compile-with "${ZLIB_C} -Wno-cast-qual"
+../contrib/zlib/inflate.c optional crypto | geom_uzip | ipsec | \
+ ipsec_support | mxge | ddb_ctf | gzio \
+ compile-with "${ZLIB_C} -Wno-cast-qual"
+../contrib/zlib/inftrees.c optional crypto | geom_uzip | ipsec | \
+ ipsec_support | mxge | ddb_ctf | gzio \
+ compile-with "${ZLIB_C} -Wno-cast-qual"
+../contrib/zlib/trees.c optional crypto | geom_uzip | ipsec | \
+ ipsec_support | mxge | ddb_ctf | gzio \
+ compile-with "${ZLIB_C} -Wno-cast-qual"
+../contrib/zlib/zutil.c optional crypto | geom_uzip | ipsec | \
+ ipsec_support | mxge | ddb_ctf | gzio \
+ compile-with "${ZLIB_C} -Wno-cast-qual"
+libkern/kern_zlib.c optional crypto | geom_uzip | ipsec | \
+ ipsec_support | mxge | ddb_ctf | gzio \
+ compile-with "${ZLIB_C} -Wno-cast-qual"
net/altq/altq_cbq.c optional altq
net/altq/altq_codel.c optional altq
net/altq/altq_hfsc.c optional altq
@@ -4199,7 +4214,7 @@
netgraph/ng_car.c optional netgraph_car
netgraph/ng_checksum.c optional netgraph_checksum
netgraph/ng_cisco.c optional netgraph_cisco
-netgraph/ng_deflate.c optional netgraph_deflate
+netgraph/ng_deflate.c optional netgraph_deflate # should I delete?
netgraph/ng_device.c optional netgraph_device
netgraph/ng_echo.c optional netgraph_echo
netgraph/ng_eiface.c optional netgraph_eiface
@@ -4794,7 +4809,8 @@
opencrypto/cryptodev.c optional cryptodev
opencrypto/cryptodev_if.m optional crypto | ipsec | ipsec_support
opencrypto/cryptosoft.c optional crypto | ipsec | ipsec_support
-opencrypto/cryptodeflate.c optional crypto | ipsec | ipsec_support
+opencrypto/cryptodeflate.c optional crypto | ipsec | ipsec_support \
+ compile-with "${ZLIB_C}"
opencrypto/gmac.c optional crypto | ipsec | ipsec_support
opencrypto/gfmult.c optional crypto | ipsec | ipsec_support
opencrypto/rmd160.c optional crypto | ipsec | ipsec_support
Index: sys/conf/files.amd64
===================================================================
--- sys/conf/files.amd64
+++ sys/conf/files.amd64
@@ -221,14 +221,22 @@
dev/atkbdc/atkbdc_isa.c optional atkbdc isa
dev/atkbdc/atkbdc_subr.c optional atkbdc
dev/atkbdc/psm.c optional psm atkbdc
-dev/bxe/bxe.c optional bxe pci
-dev/bxe/bxe_stats.c optional bxe pci
-dev/bxe/bxe_debug.c optional bxe pci
-dev/bxe/ecore_sp.c optional bxe pci
-dev/bxe/bxe_elink.c optional bxe pci
-dev/bxe/57710_init_values.c optional bxe pci
-dev/bxe/57711_init_values.c optional bxe pci
-dev/bxe/57712_init_values.c optional bxe pci
+dev/bxe/bxe.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/bxe_stats.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/bxe_debug.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/ecore_sp.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/bxe_elink.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/57710_init_values.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/57711_init_values.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/57712_init_values.c optional bxe pci \
+ compile-with "${ZLIB_C}"
dev/coretemp/coretemp.c optional coretemp
dev/cpuctl/cpuctl.c optional cpuctl
dev/dpms/dpms.c optional dpms
Index: sys/conf/files.i386
===================================================================
--- sys/conf/files.i386
+++ sys/conf/files.i386
@@ -171,14 +171,22 @@
dev/atkbdc/atkbdc_isa.c optional atkbdc isa
dev/atkbdc/atkbdc_subr.c optional atkbdc
dev/atkbdc/psm.c optional psm atkbdc
-dev/bxe/bxe.c optional bxe pci
-dev/bxe/bxe_stats.c optional bxe pci
-dev/bxe/bxe_debug.c optional bxe pci
-dev/bxe/ecore_sp.c optional bxe pci
-dev/bxe/bxe_elink.c optional bxe pci
-dev/bxe/57710_init_values.c optional bxe pci
-dev/bxe/57711_init_values.c optional bxe pci
-dev/bxe/57712_init_values.c optional bxe pci
+dev/bxe/bxe.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/bxe_stats.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/bxe_debug.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/ecore_sp.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/bxe_elink.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/57710_init_values.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/57711_init_values.c optional bxe pci \
+ compile-with "${ZLIB_C}"
+dev/bxe/57712_init_values.c optional bxe pci \
+ compile-with "${ZLIB_C}"
dev/ce/ceddk.c optional ce
dev/ce/if_ce.c optional ce
dev/ce/tau32-ddk.c optional ce \
Index: sys/conf/kern.pre.mk
===================================================================
--- sys/conf/kern.pre.mk
+++ sys/conf/kern.pre.mk
@@ -173,6 +173,9 @@
NORMAL_FWO= ${LD} -b binary --no-warn-mismatch -d -warn-common -r \
-m ${LD_EMULATION} -o ${.TARGET} ${.ALLSRC:M*.fw}
+# for zlib in the kernel (include zstd/lib/freebsd before other CFLAGS)
+ZLIB_C= ${CC} -c -I$S/../contrib/zlib -I$S/contrib/zstd/lib/freebsd ${CFLAGS} -DZ_PREFIX ${.IMPSRC}
+
# for ZSTD in the kernel (include zstd/lib/freebsd before other CFLAGS)
ZSTD_C= ${CC} -c -DZSTD_HEAPMODE=1 -I$S/contrib/zstd/lib/freebsd ${CFLAGS} -I$S/contrib/zstd/lib -I$S/contrib/zstd/lib/common ${WERROR} -Wno-inline -Wno-missing-prototypes ${PROF} -U__BMI__ ${.IMPSRC}
@@ -184,7 +187,6 @@
# Special flags for managing the compat compiles for ZFS
ZFS_CFLAGS= -DBUILDING_ZFS -I$S/cddl/contrib/opensolaris/uts/common/fs/zfs
ZFS_CFLAGS+= -I$S/cddl/contrib/opensolaris/uts/common/fs/zfs/lua
-ZFS_CFLAGS+= -I$S/cddl/contrib/opensolaris/uts/common/zmod
ZFS_CFLAGS+= -I$S/cddl/contrib/opensolaris/common/zfs
ZFS_CFLAGS+= ${CDDL_CFLAGS}
ZFS_ASM_CFLAGS= -x assembler-with-cpp -DLOCORE ${ZFS_CFLAGS}
Index: sys/contrib/zstd/lib/freebsd/errno.h
===================================================================
--- /dev/null
+++ sys/contrib/zstd/lib/freebsd/errno.h
@@ -0,0 +1,3 @@
+/* This file is in the public domain */
+/* $FreeBSD$ */
+#include <sys/errno.h>
Index: sys/contrib/zstd/lib/freebsd/fcntl.h
===================================================================
--- /dev/null
+++ sys/contrib/zstd/lib/freebsd/fcntl.h
@@ -0,0 +1,3 @@
+/* This file is in the public domain */
+/* $FreeBSD$ */
+#include <sys/fcntl.h>
Index: sys/contrib/zstd/lib/freebsd/stdarg.h
===================================================================
--- /dev/null
+++ sys/contrib/zstd/lib/freebsd/stdarg.h
@@ -0,0 +1,3 @@
+/* This file is in the public domain */
+/* $FreeBSD$ */
+#include <sys/_stdarg.h>
Index: sys/dev/bxe/bxe.h
===================================================================
--- sys/dev/bxe/bxe.h
+++ sys/dev/bxe/bxe.h
@@ -53,7 +53,7 @@
#include <sys/limits.h>
#include <sys/queue.h>
#include <sys/taskqueue.h>
-#include <sys/zlib.h>
+#include <zlib.h> /* z_stream */
#include <net/if.h>
#include <net/if_types.h>
Index: sys/dev/iscsi/icl_soft.c
===================================================================
--- sys/dev/iscsi/icl_soft.c
+++ sys/dev/iscsi/icl_soft.c
@@ -41,6 +41,7 @@
#include <sys/capsicum.h>
#include <sys/condvar.h>
#include <sys/conf.h>
+#include <sys/crc32.h>
#include <sys/file.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
Index: sys/dev/iscsi_initiator/isc_subr.c
===================================================================
--- sys/dev/iscsi_initiator/isc_subr.c
+++ sys/dev/iscsi_initiator/isc_subr.c
@@ -39,6 +39,7 @@
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/conf.h>
+#include <sys/crc32.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/ctype.h>
Index: sys/dev/liquidio/lio_bsd.h
===================================================================
--- sys/dev/liquidio/lio_bsd.h
+++ sys/dev/liquidio/lio_bsd.h
@@ -36,6 +36,7 @@
#define __LIO_BSD_H__
#include <sys/param.h>
+#include <sys/crc32.h>
#include <sys/socket.h>
#include <sys/kernel.h>
#include <sys/module.h>
Index: sys/dev/mxge/if_mxge.c
===================================================================
--- sys/dev/mxge/if_mxge.c
+++ sys/dev/mxge/if_mxge.c
@@ -47,7 +47,7 @@
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/taskqueue.h>
-#include <sys/zlib.h>
+#include <zlib.h>
#include <net/if.h>
#include <net/if_var.h>
@@ -725,7 +725,7 @@
bzero(&zs, sizeof (zs));
zs.zalloc = z_alloc;
zs.zfree = z_free;
- status = inflateInit(&zs);
+ status = z_inflateInit(&zs);
if (status != Z_OK) {
status = EIO;
goto abort_with_fw;
Index: sys/dev/usb/net/if_cdce.c
===================================================================
--- sys/dev/usb/net/if_cdce.c
+++ sys/dev/usb/net/if_cdce.c
@@ -50,6 +50,7 @@
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
+#include <sys/crc32.h>
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
Index: sys/fs/ext2fs/ext2_csum.c
===================================================================
--- sys/fs/ext2fs/ext2_csum.c
+++ sys/fs/ext2fs/ext2_csum.c
@@ -39,6 +39,7 @@
#include <sys/buf.h>
#include <sys/endian.h>
#include <sys/conf.h>
+#include <sys/crc32.h>
#include <sys/mount.h>
#include <fs/ext2fs/fs.h>
Index: sys/geom/part/g_part_bsd64.c
===================================================================
--- sys/geom/part/g_part_bsd64.c
+++ sys/geom/part/g_part_bsd64.c
@@ -29,6 +29,7 @@
#include <sys/param.h>
#include <sys/bio.h>
+#include <sys/crc32.h>
#include <sys/disklabel.h>
#include <sys/endian.h>
#include <sys/gpt.h>
Index: sys/geom/part/g_part_gpt.c
===================================================================
--- sys/geom/part/g_part_gpt.c
+++ sys/geom/part/g_part_gpt.c
@@ -32,6 +32,7 @@
#include <sys/param.h>
#include <sys/bio.h>
#include <sys/diskmbr.h>
+#include <sys/crc32.h>
#include <sys/endian.h>
#include <sys/gpt.h>
#include <sys/kernel.h>
Index: sys/geom/raid/md_ddf.c
===================================================================
--- sys/geom/raid/md_ddf.c
+++ sys/geom/raid/md_ddf.c
@@ -31,6 +31,7 @@
#include <sys/param.h>
#include <sys/bio.h>
+#include <sys/crc32.h>
#include <sys/endian.h>
#include <sys/kernel.h>
#include <sys/kobj.h>
Index: sys/geom/uzip/g_uzip_zlib.c
===================================================================
--- sys/geom/uzip/g_uzip_zlib.c
+++ sys/geom/uzip/g_uzip_zlib.c
@@ -33,7 +33,7 @@
#include <sys/systm.h>
#include <sys/malloc.h>
-#include <sys/zlib.h>
+#include <zlib.h>
#include <geom/uzip/g_uzip.h>
#include <geom/uzip/g_uzip_dapi.h>
@@ -56,7 +56,7 @@
struct g_uzip_zlib *zp;
zp = (struct g_uzip_zlib *)zpp->pvt;
- inflateEnd(&zp->zs);
+ z_inflateEnd(&zp->zs);
free(zp, M_GEOM_UZIP);
}
@@ -74,9 +74,9 @@
zp->zs.next_out = obp;
zp->zs.avail_out = zp->blksz;
- err = (inflate(&zp->zs, Z_FINISH) != Z_STREAM_END) ? 1 : 0;
+ err = (z_inflate(&zp->zs, Z_FINISH) != Z_STREAM_END) ? 1 : 0;
if (err != 0) {
- printf("%s: UZIP(zlib) inflate() failed\n", gp_name);
+ printf("%s: UZIP(zlib) z_inflate() failed\n", gp_name);
}
return (err);
}
@@ -90,20 +90,13 @@
zp = (struct g_uzip_zlib *)zpp->pvt;
err = 0;
- if (inflateReset(&zp->zs) != Z_OK) {
+ if (z_inflateReset(&zp->zs) != Z_OK) {
printf("%s: UZIP(zlib) decoder reset failed\n", gp_name);
err = 1;
}
return (err);
}
-static int
-z_compressBound(int len)
-{
-
- return (len + (len >> 12) + (len >> 14) + 11);
-}
-
struct g_uzip_dapi *
g_uzip_zlib_ctor(uint32_t blksz)
{
@@ -112,7 +105,7 @@
zp = malloc(sizeof(struct g_uzip_zlib), M_GEOM_UZIP, M_WAITOK);
zp->zs.zalloc = z_alloc;
zp->zs.zfree = z_free;
- if (inflateInit(&zp->zs) != Z_OK) {
+ if (z_inflateInit(&zp->zs) != Z_OK) {
goto e1;
}
zp->blksz = blksz;
Index: sys/kern/kern_ctf.c
===================================================================
--- sys/kern/kern_ctf.c
+++ sys/kern/kern_ctf.c
@@ -40,6 +40,9 @@
#define CTF_HDR_STRLEN_U32 8
#ifdef DDB_CTF
+
+#include <zlib.h>
+
static void *
z_alloc(void *nil, u_int items, u_int size)
{
@@ -268,7 +271,7 @@
zs.zalloc = z_alloc;
zs.zfree = z_free;
- if (inflateInit(&zs) != Z_OK) {
+ if (z_inflateInit(&zs) != Z_OK) {
error = EIO;
goto out;
}
@@ -277,10 +280,10 @@
zs.next_in = ((uint8_t *) raw) + sizeof(ctf_hdr);
zs.avail_out = sz - sizeof(ctf_hdr);
zs.next_out = ((uint8_t *) ctftab) + sizeof(ctf_hdr);
- ret = inflate(&zs, Z_FINISH);
- inflateEnd(&zs);
+ ret = z_inflate(&zs, Z_FINISH);
+ z_inflateEnd(&zs);
if (ret != Z_STREAM_END) {
- printf("%s(%d): zlib inflate returned %d\n", __func__, __LINE__, ret);
+ printf("%s(%d): zlib z_inflate returned %d\n", __func__, __LINE__, ret);
error = EIO;
goto out;
}
Index: sys/kern/link_elf.c
===================================================================
--- sys/kern/link_elf.c
+++ sys/kern/link_elf.c
@@ -67,10 +67,6 @@
#include <sys/link_elf.h>
-#ifdef DDB_CTF
-#include <sys/zlib.h>
-#endif
-
#include "linker_if.h"
#define MAXSEGS 4
Index: sys/kern/link_elf_obj.c
===================================================================
--- sys/kern/link_elf_obj.c
+++ sys/kern/link_elf_obj.c
@@ -62,7 +62,7 @@
#include <sys/link_elf.h>
#ifdef DDB_CTF
-#include <sys/zlib.h>
+#include <zlib.h>
#endif
#include "linker_if.h"
Index: sys/kern/subr_compressor.c
===================================================================
--- sys/kern/subr_compressor.c
+++ sys/kern/subr_compressor.c
@@ -66,7 +66,8 @@
#ifdef GZIO
-#include <sys/zutil.h>
+#include <sys/crc32.h>
+#include <zlib.h> /* z_deflateInit2, etc */
struct gz_stream {
uint8_t *gz_buffer; /* output buffer */
@@ -117,8 +118,8 @@
s->gz_stream.next_in = Z_NULL;
s->gz_stream.avail_in = 0;
- error = deflateInit2(&s->gz_stream, level, Z_DEFLATED, -MAX_WBITS,
- DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY);
+ error = z_deflateInit2(&s->gz_stream, level, Z_DEFLATED, -MAX_WBITS,
+ 8 /* as DEF_MEM_LEVEL */, Z_DEFAULT_STRATEGY);
if (error != 0)
goto fail;
@@ -142,7 +143,7 @@
s->gz_off = 0;
s->gz_crc = ~0U;
- (void)deflateReset(&s->gz_stream);
+ (void)z_deflateReset(&s->gz_stream);
s->gz_stream.avail_out = s->gz_bufsz;
s->gz_stream.next_out = s->gz_buffer;
@@ -152,7 +153,7 @@
hdr[0] = 0x1f;
hdr[1] = 0x8b;
hdr[2] = Z_DEFLATED;
- hdr[9] = OS_CODE;
+ hdr[9] = 0x03; /* zlib's OS_CODE Unix */
s->gz_stream.next_out += hdrlen;
s->gz_stream.avail_out -= hdrlen;
}
@@ -178,7 +179,7 @@
error = 0;
do {
- zerror = deflate(&s->gz_stream, zflag);
+ zerror = z_deflate(&s->gz_stream, zflag);
if (zerror != Z_OK && zerror != Z_STREAM_END) {
error = EIO;
break;
@@ -232,7 +233,7 @@
struct gz_stream *s;
s = stream;
- (void)deflateEnd(&s->gz_stream);
+ (void)z_deflateEnd(&s->gz_stream);
gz_free(NULL, s->gz_buffer);
gz_free(NULL, s);
}
Index: sys/libkern/crc32.c
===================================================================
--- sys/libkern/crc32.c
+++ sys/libkern/crc32.c
@@ -48,7 +48,7 @@
#include <sys/param.h>
#ifdef _KERNEL
-#include <sys/libkern.h>
+#include <sys/crc32.h>
#include <sys/systm.h>
#if defined(__amd64__) || defined(__i386__)
Index: sys/libkern/kern_zlib.c
===================================================================
--- /dev/null
+++ sys/libkern/kern_zlib.c
@@ -0,0 +1,28 @@
+#include <sys/param.h>
+#include <sys/time.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+
+#ifdef _KERNEL
+static int
+zlib_modevent(module_t mod, int type, void *unused)
+{
+ switch (type) {
+ case MOD_LOAD:
+ return 0;
+ case MOD_UNLOAD:
+ return 0;
+ }
+ return EINVAL;
+}
+
+static moduledata_t zlib_mod = {
+ "zlib",
+ zlib_modevent,
+ 0
+};
+DECLARE_MODULE(zlib, zlib_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
+MODULE_VERSION(zlib, 1);
+#endif /* _KERNEL */
+
+#include "../../contrib/zlib/crc32.c" /* avoid conflict with libkern/crc32.c */
Index: sys/libkern/x86/crc32_sse42.c
===================================================================
--- sys/libkern/x86/crc32_sse42.c
+++ sys/libkern/x86/crc32_sse42.c
@@ -34,7 +34,7 @@
#include <stdlib.h>
#else
#include <sys/param.h>
-#include <sys/systm.h>
+#include <sys/crc32.h>
#include <sys/kernel.h>
#endif
Index: sys/libkern/zlib.c
===================================================================
--- sys/libkern/zlib.c
+++ sys/libkern/zlib.c
@@ -1,5414 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets. See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp and deflateOutputPending
- * - allow strm->next_out to be NULL, meaning discard the output
- *
- * $FreeBSD$
- */
-
-/*
- * ==FILEVERSION 971210==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-#define NO_DUMMY_DECL
-#define NO_ZCFUNCS
-#define MY_ZCALLOC
-
-#if defined(__FreeBSD__) && defined(_KERNEL)
-#define _tr_init _zlib104_tr_init
-#define _tr_align _zlib104_tr_align
-#define _tr_tally _zlib104_tr_tally
-#define _tr_flush_block _zlib104_tr_flush_block
-#define _tr_stored_block _zlib104_tr_stored_block
-#define inflate_fast _zlib104_inflate_fast
-#define inflate _zlib104_inflate
-#define zlibVersion _zlib104_Version
-#endif
-
-
-/* +++ zutil.h */
-/*-
- * zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.16 1996/07/24 13:41:13 me Exp $ */
-
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
-
-#ifdef _KERNEL
-#include <sys/zlib.h>
-#else
-#include "zlib.h"
-#endif
-
-#ifdef _KERNEL
-/* Assume this is a *BSD or SVR4 kernel */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/systm.h>
-#include <sys/param.h>
-#include <sys/kernel.h>
-#include <sys/module.h>
-# define HAVE_MEMCPY
-
-#else
-#if defined(__KERNEL__)
-/* Assume this is a Linux kernel */
-#include <linux/string.h>
-#define HAVE_MEMCPY
-
-#else /* not kernel */
-
-#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS)
-# include <stddef.h>
-# include <errno.h>
-#else
- extern int errno;
-#endif
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#endif
-#endif /* __KERNEL__ */
-#endif /* _KERNEL */
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long ulg;
-
-static const char *z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
- return (strm->msg = (const char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
- /* common constants */
-
-#ifndef DEF_WBITS
-# define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES 2
-/* The three kinds of block type */
-
-#define MIN_MATCH 3
-#define MAX_MATCH 258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
- /* target dependencies */
-
-#ifdef MSDOS
-# define OS_CODE 0x00
-# ifdef __TURBOC__
-# include <alloc.h>
-# else /* MSC or DJGPP */
-# include <malloc.h>
-# endif
-#endif
-
-#ifdef OS2
-# define OS_CODE 0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-# define OS_CODE 0x0b
-#endif
-
-#if defined(VAXC) || defined(VMS)
-# define OS_CODE 0x02
-# define FOPEN(name, mode) \
- fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#ifdef AMIGA
-# define OS_CODE 0x01
-#endif
-
-#if defined(ATARI) || defined(atarist)
-# define OS_CODE 0x05
-#endif
-
-#ifdef MACOS
-# define OS_CODE 0x07
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-# define OS_CODE 0x0F
-#endif
-
-#ifdef TOPS20
-# define OS_CODE 0x0a
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-# define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
- /* Common defaults */
-
-#ifndef OS_CODE
-# define OS_CODE 0x03 /* assume Unix */
-#endif
-
-#ifndef FOPEN
-# define FOPEN(name, mode) fopen((name), (mode))
-#endif
-
- /* functions */
-
-#ifdef HAVE_STRERROR
- extern char *strerror OF((int));
-# define zstrerror(errnum) strerror(errnum)
-#else
-# define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
-# define NO_MEMCPY
-#endif
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER)
- /* Use our own functions for small and medium model with MSC <= 5.0.
- * You may have to use the same strategy for Borland C (untested).
- */
-# define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-# define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-# define zmemcpy _fmemcpy
-# define zmemcmp _fmemcmp
-# define zmemzero(dest, len) _fmemset(dest, 0, len)
-# else
-# define zmemcpy memcpy
-# define zmemcmp memcmp
-# define zmemzero(dest, len) memset(dest, 0, len)
-# endif
-#else
- extern void zmemcpy OF((Bytef* dest, Bytef* source, uInt len));
- extern int zmemcmp OF((Bytef* s1, Bytef* s2, uInt len));
- extern void zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-# include <stdio.h>
-# ifndef verbose
-# define verbose 0
-# endif
- extern void z_error OF((char *m));
-# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len));
-
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void zcfree OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
- (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* _Z_UTIL_H */
-/* --- zutil.h */
-
-/* +++ deflate.h */
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* From: deflate.h,v 1.10 1996/07/02 12:41:00 me Exp $ */
-
-#ifndef _DEFLATE_H
-#define _DEFLATE_H
-
-/* #include "zutil.h" */
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS 256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES 30
-/* number of distance codes */
-
-#define BL_CODES 19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE 42
-#define BUSY_STATE 113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
- union {
- ush freq; /* frequency count */
- ush code; /* bit string */
- } fc;
- union {
- ush dad; /* father node in Huffman tree */
- ush len; /* length of bit string */
- } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad dl.dad
-#define Len dl.len
-
-typedef struct static_tree_desc_s static_tree_desc;
-
-typedef struct tree_desc_s {
- ct_data *dyn_tree; /* the dynamic tree */
- int max_code; /* largest code with non zero frequency */
- static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct deflate_state {
- z_streamp strm; /* pointer back to this zlib stream */
- int status; /* as the name implies */
- Bytef *pending_buf; /* output still pending */
- ulg pending_buf_size; /* size of pending_buf */
- Bytef *pending_out; /* next pending byte to output to the stream */
- int pending; /* nb of bytes in the pending buffer */
- int noheader; /* suppress zlib header and adler32 */
- Byte data_type; /* UNKNOWN, BINARY or ASCII */
- Byte method; /* STORED (for zip only) or DEFLATED */
- int last_flush; /* value of flush param for previous deflate call */
-
- /* used by deflate.c: */
-
- uInt w_size; /* LZ77 window size (32K by default) */
- uInt w_bits; /* log2(w_size) (8..16) */
- uInt w_mask; /* w_size - 1 */
-
- Bytef *window;
- /* Sliding window. Input bytes are read into the second half of the window,
- * and move to the first half later to keep a dictionary of at least wSize
- * bytes. With this organization, matches are limited to a distance of
- * wSize-MAX_MATCH bytes, but this ensures that IO is always
- * performed with a length multiple of the block size. Also, it limits
- * the window size to 64K, which is quite useful on MSDOS.
- * To do: use the user input buffer as sliding window.
- */
-
- ulg window_size;
- /* Actual size of window: 2*wSize, except when the user input buffer
- * is directly used as sliding window.
- */
-
- Posf *prev;
- /* Link to older string with same hash index. To limit the size of this
- * array to 64K, this link is maintained only for the last 32K strings.
- * An index in this array is thus a window index modulo 32K.
- */
-
- Posf *head; /* Heads of the hash chains or NIL. */
-
- uInt ins_h; /* hash index of string to be inserted */
- uInt hash_size; /* number of elements in hash table */
- uInt hash_bits; /* log2(hash_size) */
- uInt hash_mask; /* hash_size-1 */
-
- uInt hash_shift;
- /* Number of bits by which ins_h must be shifted at each input
- * step. It must be such that after MIN_MATCH steps, the oldest
- * byte no longer takes part in the hash key, that is:
- * hash_shift * MIN_MATCH >= hash_bits
- */
-
- long block_start;
- /* Window position at the beginning of the current output block. Gets
- * negative when the window is moved backwards.
- */
-
- uInt match_length; /* length of best match */
- IPos prev_match; /* previous match */
- int match_available; /* set if previous match exists */
- uInt strstart; /* start of string to insert */
- uInt match_start; /* start of matching string */
- uInt lookahead; /* number of valid bytes ahead in window */
-
- uInt prev_length;
- /* Length of the best match at previous step. Matches not greater than this
- * are discarded. This is used in the lazy match evaluation.
- */
-
- uInt max_chain_length;
- /* To speed up deflation, hash chains are never searched beyond this
- * length. A higher limit improves compression ratio but degrades the
- * speed.
- */
-
- uInt max_lazy_match;
- /* Attempt to find a better match only when the current match is strictly
- * smaller than this value. This mechanism is used only for compression
- * levels >= 4.
- */
-# define max_insert_length max_lazy_match
- /* Insert new strings in the hash table only if the match length is not
- * greater than this length. This saves time but degrades compression.
- * max_insert_length is used only for compression levels <= 3.
- */
-
- int level; /* compression level (1..9) */
- int strategy; /* favor or force Huffman coding*/
-
- uInt good_match;
- /* Use a faster search when the previous match is longer than this */
-
- int nice_match; /* Stop searching when current match exceeds this */
-
- /* used by trees.c: */
- /* Didn't use ct_data typedef below to supress compiler warning */
- struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
- struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
- struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
-
- struct tree_desc_s l_desc; /* desc. for literal tree */
- struct tree_desc_s d_desc; /* desc. for distance tree */
- struct tree_desc_s bl_desc; /* desc. for bit length tree */
-
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
- int heap_len; /* number of elements in the heap */
- int heap_max; /* element of largest frequency */
- /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
- * The same heap array is used to build all trees.
- */
-
- uch depth[2*L_CODES+1];
- /* Depth of each subtree used as tie breaker for trees of equal frequency
- */
-
- uchf *l_buf; /* buffer for literals or lengths */
-
- uInt lit_bufsize;
- /* Size of match buffer for literals/lengths. There are 4 reasons for
- * limiting lit_bufsize to 64K:
- * - frequencies can be kept in 16 bit counters
- * - if compression is not successful for the first block, all input
- * data is still in the window so we can still emit a stored block even
- * when input comes from standard input. (This can also be done for
- * all blocks if lit_bufsize is not greater than 32K.)
- * - if compression is not successful for a file smaller than 64K, we can
- * even emit a stored file instead of a stored block (saving 5 bytes).
- * This is applicable only for zip (not gzip or zlib).
- * - creating new Huffman trees less frequently may not provide fast
- * adaptation to changes in the input data statistics. (Take for
- * example a binary file with poorly compressible code followed by
- * a highly compressible string table.) Smaller buffer sizes give
- * fast adaptation but have of course the overhead of transmitting
- * trees more frequently.
- * - I can't count above 4
- */
-
- uInt last_lit; /* running index in l_buf */
-
- ushf *d_buf;
- /* Buffer for distances. To simplify the code, d_buf and l_buf have
- * the same number of elements. To use different lengths, an extra flag
- * array would be necessary.
- */
-
- ulg opt_len; /* bit length of current block with optimal trees */
- ulg static_len; /* bit length of current block with static trees */
- ulg compressed_len; /* total bit length of compressed file */
- uInt matches; /* number of string matches in current block */
- int last_eob_len; /* bit length of EOB code for last block */
-
-#ifdef DEBUG_ZLIB
- ulg bits_sent; /* bit length of the compressed data */
-#endif
-
- ush bi_buf;
- /* Output buffer. bits are inserted starting at the bottom (least
- * significant bits).
- */
- int bi_valid;
- /* Number of valid bits in bi_buf. All bits above the last valid bit
- * are always zero.
- */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
- /* in trees.c */
-void _tr_init OF((deflate_state *s));
-int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-ulg _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-void _tr_align OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-void _tr_stored_type_only OF((deflate_state *));
-
-#endif
-/* --- deflate.h */
-
-/* +++ deflate.c */
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * ALGORITHM
- *
- * The "deflation" process depends on being able to identify portions
- * of the input text which are identical to earlier input (within a
- * sliding window trailing behind the input currently being processed).
- *
- * The most straightforward technique turns out to be the fastest for
- * most input files: try all possible matches and select the longest.
- * The key feature of this algorithm is that insertions into the string
- * dictionary are very simple and thus fast, and deletions are avoided
- * completely. Insertions are performed at each input character, whereas
- * string matches are performed only when the previous match ends. So it
- * is preferable to spend more time in matches to allow very fast string
- * insertions and avoid deletions. The matching algorithm for small
- * strings is inspired from that of Rabin & Karp. A brute force approach
- * is used to find longer strings when a small match has been found.
- * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- * (by Leonid Broukhis).
- * A previous version of this file used a more sophisticated algorithm
- * (by Fiala and Greene) which is guaranteed to run in linear amortized
- * time, but has a larger average cost, uses more memory and is patented.
- * However the F&G algorithm may be faster for some highly redundant
- * files if the parameter max_chain_length (described below) is too large.
- *
- * ACKNOWLEDGEMENTS
- *
- * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- * I found it in 'freeze' written by Leonid Broukhis.
- * Thanks to many people for bug reports and testing.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- * Available in ftp://ds.internic.net/rfc/rfc1951.txt
- *
- * A description of the Rabin and Karp algorithm is given in the book
- * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- * Fiala,E.R., and Greene,D.H.
- * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* From: deflate.c,v 1.15 1996/07/24 13:40:58 me Exp $ */
-
-/* #include "deflate.h" */
-
-char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- * Function prototypes.
- */
-typedef enum {
- need_more, /* block not completed, need more input or more output */
- block_done, /* block flush performed */
- finish_started, /* finish started, need only more output at next deflate */
- finish_done /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast OF((deflate_state *s, int flush));
-local block_state deflate_slow OF((deflate_state *s, int flush));
-local void lm_init OF((deflate_state *s));
-local void putShortMSB OF((deflate_state *s, uInt b));
-local void flush_pending OF((z_streamp strm));
-local int read_buf OF((z_streamp strm, charf *buf, unsigned size));
-#ifdef ASMV
- void match_init OF((void)); /* asm code initialization */
- uInt longest_match OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef DEBUG_ZLIB
-local void check_match OF((deflate_state *s, IPos start, IPos match,
- int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-# define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
- ush good_length; /* reduce lazy search above this match length */
- ush max_lazy; /* do not perform lazy search above this match length */
- ush nice_length; /* quit search above this match length */
- ush max_chain;
- compress_func func;
-} config;
-
-local config configuration_table[10] = {
-/* good lazy nice chain */
-/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
-/* 1 */ {4, 4, 8, 4, deflate_fast}, /* maximum speed, no lazy matches */
-/* 2 */ {4, 5, 16, 8, deflate_fast},
-/* 3 */ {4, 6, 32, 32, deflate_fast},
-
-/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
-/* 5 */ {8, 16, 32, 32, deflate_slow},
-/* 6 */ {8, 16, 128, 128, deflate_slow},
-/* 7 */ {8, 32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN assertion: all calls to to UPDATE_HASH are made with consecutive
- * input characters, so that a running hash key can be computed from the
- * previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * IN assertion: all calls to to INSERT_STRING are made with consecutive
- * input characters and the first MIN_MATCH bytes of str are valid
- * (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#define INSERT_STRING(s, str, match_head) \
- (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
- s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
- s->head[s->ins_h] = (Pos)(str))
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
- s->head[s->hash_size-1] = NIL; \
- zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int deflateInit_(strm, level, version, stream_size)
- z_streamp strm;
- int level;
- const char *version;
- int stream_size;
-{
- return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
- Z_DEFAULT_STRATEGY, version, stream_size);
- /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
- version, stream_size)
- z_streamp strm;
- int level;
- int method;
- int windowBits;
- int memLevel;
- int strategy;
- const char *version;
- int stream_size;
-{
- deflate_state *s;
- int noheader = 0;
- static char* my_version = ZLIB_VERSION;
-
- ushf *overlay;
- /* We overlay pending_buf and d_buf+l_buf. This works since the average
- * output size for (length,distance) codes is <= 24 bits.
- */
-
- if (version == Z_NULL || version[0] != my_version[0] ||
- stream_size != sizeof(z_stream)) {
- return Z_VERSION_ERROR;
- }
- if (strm == Z_NULL) return Z_STREAM_ERROR;
-
- strm->msg = Z_NULL;
-#ifndef NO_ZCFUNCS
- if (strm->zalloc == Z_NULL) {
- strm->zalloc = zcalloc;
- strm->opaque = (voidpf)0;
- }
- if (strm->zfree == Z_NULL) strm->zfree = zcfree;
-#endif
-
- if (level == Z_DEFAULT_COMPRESSION) level = 6;
-
- if (windowBits < 0) { /* undocumented feature: suppress zlib header */
- noheader = 1;
- windowBits = -windowBits;
- }
- if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
- windowBits < 9 || windowBits > 15 || level < 0 || level > 9 ||
- strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
- return Z_STREAM_ERROR;
- }
- s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
- if (s == Z_NULL) return Z_MEM_ERROR;
- strm->state = (struct internal_state FAR *)s;
- s->strm = strm;
-
- s->noheader = noheader;
- s->w_bits = windowBits;
- s->w_size = 1 << s->w_bits;
- s->w_mask = s->w_size - 1;
-
- s->hash_bits = memLevel + 7;
- s->hash_size = 1 << s->hash_bits;
- s->hash_mask = s->hash_size - 1;
- s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
- s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
- s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
- s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
-
- s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
- overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
- s->pending_buf = (uchf *) overlay;
- s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
- if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
- s->pending_buf == Z_NULL) {
- strm->msg = (const char*)ERR_MSG(Z_MEM_ERROR);
- deflateEnd (strm);
- return Z_MEM_ERROR;
- }
- s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
- s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
- s->level = level;
- s->strategy = strategy;
- s->method = (Byte)method;
-
- return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int deflateSetDictionary (strm, dictionary, dictLength)
- z_streamp strm;
- const Bytef *dictionary;
- uInt dictLength;
-{
- deflate_state *s;
- uInt length = dictLength;
- uInt n;
- IPos hash_head = 0;
-
- if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
- return Z_STREAM_ERROR;
-
- s = (deflate_state *) strm->state;
- if (s->status != INIT_STATE) return Z_STREAM_ERROR;
-
- strm->adler = adler32(strm->adler, dictionary, dictLength);
-
- if (length < MIN_MATCH) return Z_OK;
- if (length > MAX_DIST(s)) {
- length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
- dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
- }
- zmemcpy((charf *)s->window, dictionary, length);
- s->strstart = length;
- s->block_start = (long)length;
-
- /* Insert all strings in the hash table (except for the last two bytes).
- * s->lookahead stays null, so s->ins_h will be recomputed at the next
- * call of fill_window.
- */
- s->ins_h = s->window[0];
- UPDATE_HASH(s, s->ins_h, s->window[1]);
- for (n = 0; n <= length - MIN_MATCH; n++) {
- INSERT_STRING(s, n, hash_head);
- }
- if (hash_head) hash_head = 0; /* to make compiler happy */
- return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateReset (strm)
- z_streamp strm;
-{
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
- strm->total_in = strm->total_out = 0;
- strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
- strm->data_type = Z_UNKNOWN;
-
- s = (deflate_state *)strm->state;
- s->pending = 0;
- s->pending_out = s->pending_buf;
-
- if (s->noheader < 0) {
- s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
- }
- s->status = s->noheader ? BUSY_STATE : INIT_STATE;
- strm->adler = 1;
- s->last_flush = Z_NO_FLUSH;
-
- _tr_init(s);
- lm_init(s);
-
- return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateParams(strm, level, strategy)
- z_streamp strm;
- int level;
- int strategy;
-{
- deflate_state *s;
- compress_func func;
- int err = Z_OK;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- s = (deflate_state *) strm->state;
-
- if (level == Z_DEFAULT_COMPRESSION) {
- level = 6;
- }
- if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
- return Z_STREAM_ERROR;
- }
- func = configuration_table[s->level].func;
-
- if (func != configuration_table[level].func && strm->total_in != 0) {
- /* Flush the last buffer: */
- err = deflate(strm, Z_PARTIAL_FLUSH);
- }
- if (s->level != level) {
- s->level = level;
- s->max_lazy_match = configuration_table[level].max_lazy;
- s->good_match = configuration_table[level].good_length;
- s->nice_match = configuration_table[level].nice_length;
- s->max_chain_length = configuration_table[level].max_chain;
- }
- s->strategy = strategy;
- return err;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
- deflate_state *s;
- uInt b;
-{
- put_byte(s, (Byte)(b >> 8));
- put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
- z_streamp strm;
-{
- deflate_state *s = (deflate_state *) strm->state;
- unsigned len = s->pending;
-
- if (len > strm->avail_out) len = strm->avail_out;
- if (len == 0) return;
-
- if (strm->next_out != Z_NULL) {
- zmemcpy(strm->next_out, s->pending_out, len);
- strm->next_out += len;
- }
- s->pending_out += len;
- strm->total_out += len;
- strm->avail_out -= len;
- s->pending -= len;
- if (s->pending == 0) {
- s->pending_out = s->pending_buf;
- }
-}
-
-/* ========================================================================= */
-int deflate (strm, flush)
- z_streamp strm;
- int flush;
-{
- int old_flush; /* value of flush param for previous deflate call */
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- flush > Z_FINISH || flush < 0) {
- return Z_STREAM_ERROR;
- }
- s = (deflate_state *) strm->state;
-
- if ((strm->next_in == Z_NULL && strm->avail_in != 0) ||
- (s->status == FINISH_STATE && flush != Z_FINISH)) {
- ERR_RETURN(strm, Z_STREAM_ERROR);
- }
- if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
- s->strm = strm; /* just in case */
- old_flush = s->last_flush;
- s->last_flush = flush;
-
- /* Write the zlib header */
- if (s->status == INIT_STATE) {
-
- uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
- uInt level_flags = (s->level-1) >> 1;
-
- if (level_flags > 3) level_flags = 3;
- header |= (level_flags << 6);
- if (s->strstart != 0) header |= PRESET_DICT;
- header += 31 - (header % 31);
-
- s->status = BUSY_STATE;
- putShortMSB(s, header);
-
- /* Save the adler32 of the preset dictionary: */
- if (s->strstart != 0) {
- putShortMSB(s, (uInt)(strm->adler >> 16));
- putShortMSB(s, (uInt)(strm->adler & 0xffff));
- }
- strm->adler = 1L;
- }
-
- /* Flush as much pending output as possible */
- if (s->pending != 0) {
- flush_pending(strm);
- if (strm->avail_out == 0) {
- /* Since avail_out is 0, deflate will be called again with
- * more output space, but possibly with both pending and
- * avail_in equal to zero. There won't be anything to do,
- * but this is not an error situation so make sure we
- * return OK instead of BUF_ERROR at next call of deflate:
- */
- s->last_flush = -1;
- return Z_OK;
- }
-
- /* Make sure there is something to do and avoid duplicate consecutive
- * flushes. For repeated and useless calls with Z_FINISH, we keep
- * returning Z_STREAM_END instead of Z_BUFF_ERROR.
- */
- } else if (strm->avail_in == 0 && flush <= old_flush &&
- flush != Z_FINISH) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* User must not provide more input after the first FINISH: */
- if (s->status == FINISH_STATE && strm->avail_in != 0) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* Start a new block or continue the current one.
- */
- if (strm->avail_in != 0 || s->lookahead != 0 ||
- (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
- block_state bstate;
-
- bstate = (*(configuration_table[s->level].func))(s, flush);
-
- if (bstate == finish_started || bstate == finish_done) {
- s->status = FINISH_STATE;
- }
- if (bstate == need_more || bstate == finish_started) {
- if (strm->avail_out == 0) {
- s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
- }
- return Z_OK;
- /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
- * of deflate should use the same flush parameter to make sure
- * that the flush is complete. So we don't have to output an
- * empty block here, this will be done at next call. This also
- * ensures that for a very small output buffer, we emit at most
- * one empty block.
- */
- }
- if (bstate == block_done) {
- if (flush == Z_PARTIAL_FLUSH) {
- _tr_align(s);
- } else if (flush == Z_PACKET_FLUSH) {
- /* Output just the 3-bit `stored' block type value,
- but not a zero length. */
- _tr_stored_type_only(s);
- } else { /* FULL_FLUSH or SYNC_FLUSH */
- _tr_stored_block(s, (char*)0, 0L, 0);
- /* For a full flush, this empty block will be recognized
- * as a special marker by inflate_sync().
- */
- if (flush == Z_FULL_FLUSH) {
- CLEAR_HASH(s); /* forget history */
- }
- }
- flush_pending(strm);
- if (strm->avail_out == 0) {
- s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
- return Z_OK;
- }
- }
- }
- Assert(strm->avail_out > 0, "bug2");
-
- if (flush != Z_FINISH) return Z_OK;
- if (s->noheader) return Z_STREAM_END;
-
- /* Write the zlib trailer (adler32) */
- putShortMSB(s, (uInt)(strm->adler >> 16));
- putShortMSB(s, (uInt)(strm->adler & 0xffff));
- flush_pending(strm);
- /* If avail_out is zero, the application will call deflate again
- * to flush the rest.
- */
- s->noheader = -1; /* write the trailer only once! */
- return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int deflateEnd (strm)
- z_streamp strm;
-{
- int status;
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- s = (deflate_state *) strm->state;
-
- status = s->status;
- if (status != INIT_STATE && status != BUSY_STATE &&
- status != FINISH_STATE) {
- return Z_STREAM_ERROR;
- }
-
- /* Deallocate in reverse order of allocations: */
- TRY_FREE(strm, s->pending_buf);
- TRY_FREE(strm, s->head);
- TRY_FREE(strm, s->prev);
- TRY_FREE(strm, s->window);
-
- ZFREE(strm, s);
- strm->state = Z_NULL;
-
- return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- */
-int deflateCopy (dest, source)
- z_streamp dest;
- z_streamp source;
-{
- deflate_state *ds;
- deflate_state *ss;
- ushf *overlay;
-
- if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL)
- return Z_STREAM_ERROR;
- ss = (deflate_state *) source->state;
-
- zmemcpy(dest, source, sizeof(*dest));
-
- ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
- if (ds == Z_NULL) return Z_MEM_ERROR;
- dest->state = (struct internal_state FAR *) ds;
- zmemcpy(ds, ss, sizeof(*ds));
- ds->strm = dest;
-
- ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
- ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
- ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
- overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
- ds->pending_buf = (uchf *) overlay;
-
- if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
- ds->pending_buf == Z_NULL) {
- deflateEnd (dest);
- return Z_MEM_ERROR;
- }
- /* ??? following zmemcpy doesn't work for 16-bit MSDOS */
- zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
- zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
- zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
- zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
- ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
- ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
- ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
- ds->l_desc.dyn_tree = ds->dyn_ltree;
- ds->d_desc.dyn_tree = ds->dyn_dtree;
- ds->bl_desc.dyn_tree = ds->bl_tree;
-
- return Z_OK;
-}
-
-/* ===========================================================================
- * Return the number of bytes of output which are immediately available
- * for output from the decompressor.
- */
-int deflateOutputPending (strm)
- z_streamp strm;
-{
- if (strm == Z_NULL || strm->state == Z_NULL) return 0;
-
- return ((deflate_state *)(strm->state))->pending;
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read. All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
- z_streamp strm;
- charf *buf;
- unsigned size;
-{
- unsigned len = strm->avail_in;
-
- if (len > size) len = size;
- if (len == 0) return 0;
-
- strm->avail_in -= len;
-
- if (!((deflate_state *)(strm->state))->noheader) {
- strm->adler = adler32(strm->adler, strm->next_in, len);
- }
- zmemcpy(buf, strm->next_in, len);
- strm->next_in += len;
- strm->total_in += len;
-
- return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
- deflate_state *s;
-{
- s->window_size = (ulg)2L*s->w_size;
-
- CLEAR_HASH(s);
-
- /* Set the default configuration parameters:
- */
- s->max_lazy_match = configuration_table[s->level].max_lazy;
- s->good_match = configuration_table[s->level].good_length;
- s->nice_match = configuration_table[s->level].nice_length;
- s->max_chain_length = configuration_table[s->level].max_chain;
-
- s->strstart = 0;
- s->block_start = 0L;
- s->lookahead = 0;
- s->match_length = s->prev_length = MIN_MATCH-1;
- s->match_available = 0;
- s->ins_h = 0;
-#ifdef ASMV
- match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
- deflate_state *s;
- IPos cur_match; /* current match */
-{
- unsigned chain_length = s->max_chain_length;/* max hash chain length */
- Bytef *scan = s->window + s->strstart; /* current string */
- Bytef *match; /* matched string */
- int len; /* length of current match */
- int best_len = s->prev_length; /* best match length so far */
- int nice_match = s->nice_match; /* stop if match long enough */
- IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
- s->strstart - (IPos)MAX_DIST(s) : NIL;
- /* Stop when cur_match becomes <= limit. To simplify the code,
- * we prevent matches with the string of window index 0.
- */
- Posf *prev = s->prev;
- uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
- /* Compare two bytes at a time. Note: this is not always beneficial.
- * Try with and without -DUNALIGNED_OK to check.
- */
- Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
- ush scan_start = *(ushf*)scan;
- ush scan_end = *(ushf*)(scan+best_len-1);
-#else
- Bytef *strend = s->window + s->strstart + MAX_MATCH;
- Byte scan_end1 = scan[best_len-1];
- Byte scan_end = scan[best_len];
-#endif
-
- /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
- * It is easy to get rid of this optimization if necessary.
- */
- Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
- /* Do not waste too much time if we already have a good match: */
- if (s->prev_length >= s->good_match) {
- chain_length >>= 2;
- }
- /* Do not look for matches beyond the end of the input. This is necessary
- * to make deflate deterministic.
- */
- if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
- Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
- do {
- Assert(cur_match < s->strstart, "no future");
- match = s->window + cur_match;
-
- /* Skip to next match if the match length cannot increase
- * or if the match length is less than 2:
- */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
- /* This code assumes sizeof(unsigned short) == 2. Do not use
- * UNALIGNED_OK if your compiler uses a different size.
- */
- if (*(ushf*)(match+best_len-1) != scan_end ||
- *(ushf*)match != scan_start) continue;
-
- /* It is not necessary to compare scan[2] and match[2] since they are
- * always equal when the other bytes match, given that the hash keys
- * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
- * strstart+3, +5, ... up to strstart+257. We check for insufficient
- * lookahead only every 4th comparison; the 128th check will be made
- * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
- * necessary to put more guard bytes at the end of the window, or
- * to check more often for insufficient lookahead.
- */
- Assert(scan[2] == match[2], "scan[2]?");
- scan++, match++;
- do {
- } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- scan < strend);
- /* The funny "do {}" generates better code on most compilers */
-
- /* Here, scan <= window+strstart+257 */
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
- if (*scan == *match) scan++;
-
- len = (MAX_MATCH - 1) - (int)(strend-scan);
- scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
- if (match[best_len] != scan_end ||
- match[best_len-1] != scan_end1 ||
- *match != *scan ||
- *++match != scan[1]) continue;
-
- /* The check at best_len-1 can be removed because it will be made
- * again later. (This heuristic is not always a win.)
- * It is not necessary to compare scan[2] and match[2] since they
- * are always equal when the other bytes match, given that
- * the hash keys are equal and that HASH_BITS >= 8.
- */
- scan += 2, match++;
- Assert(*scan == *match, "match[2]?");
-
- /* We check for insufficient lookahead only every 8th comparison;
- * the 256th check will be made at strstart+258.
- */
- do {
- } while (*++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- scan < strend);
-
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
- len = MAX_MATCH - (int)(strend - scan);
- scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
- if (len > best_len) {
- s->match_start = cur_match;
- best_len = len;
- if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
- scan_end = *(ushf*)(scan+best_len-1);
-#else
- scan_end1 = scan[best_len-1];
- scan_end = scan[best_len];
-#endif
- }
- } while ((cur_match = prev[cur_match & wmask]) > limit
- && --chain_length != 0);
-
- if ((uInt)best_len <= s->lookahead) return best_len;
- return s->lookahead;
-}
-#endif /* ASMV */
-
-#ifdef DEBUG_ZLIB
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
- deflate_state *s;
- IPos start, match;
- int length;
-{
- /* check that the match is indeed a match */
- if (zmemcmp((charf *)s->window + match,
- (charf *)s->window + start, length) != EQUAL) {
- fprintf(stderr, " start %u, match %u, length %d\n",
- start, match, length);
- do {
- fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
- } while (--length != 0);
- z_error("invalid match");
- }
- if (z_verbose > 1) {
- fprintf(stderr,"\\[%d,%d]", start-match, length);
- do { putc(s->window[start++], stderr); } while (--length != 0);
- }
-}
-#else
-# define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- * At least one byte has been read, or avail_in == 0; reads are
- * performed for at least two bytes (required for the zip translate_eol
- * option -- not supported here).
- */
-local void fill_window(s)
- deflate_state *s;
-{
- unsigned n, m;
- Posf *p;
- unsigned more; /* Amount of free space at the end of the window. */
- uInt wsize = s->w_size;
-
- do {
- more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
- /* Deal with !@#$% 64K limit: */
- if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
- more = wsize;
-
- } else if (more == (unsigned)(-1)) {
- /* Very unlikely, but possible on 16 bit machine if strstart == 0
- * and lookahead == 1 (input done one byte at time)
- */
- more--;
-
- /* If the window is almost full and there is insufficient lookahead,
- * move the upper half to the lower one to make room in the upper half.
- */
- } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
- zmemcpy((charf *)s->window, (charf *)s->window+wsize,
- (unsigned)wsize);
- s->match_start -= wsize;
- s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
- s->block_start -= (long) wsize;
-
- /* Slide the hash table (could be avoided with 32 bit values
- at the expense of memory usage). We slide even when level == 0
- to keep the hash table consistent if we switch back to level > 0
- later. (Using level 0 permanently is not an optimal usage of
- zlib, so we don't care about this pathological case.)
- */
- n = s->hash_size;
- p = &s->head[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- } while (--n);
-
- n = wsize;
- p = &s->prev[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- /* If n is not on any hash chain, prev[n] is garbage but
- * its value will never be used.
- */
- } while (--n);
- more += wsize;
- }
- if (s->strm->avail_in == 0) return;
-
- /* If there was no sliding:
- * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
- * more == window_size - lookahead - strstart
- * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
- * => more >= window_size - 2*WSIZE + 2
- * In the BIG_MEM or MMAP case (not yet supported),
- * window_size == input_size + MIN_LOOKAHEAD &&
- * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
- * Otherwise, window_size == 2*WSIZE so more >= 2.
- * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
- */
- Assert(more >= 2, "more < 2");
-
- n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
- more);
- s->lookahead += n;
-
- /* Initialize the hash value now that we have some input: */
- if (s->lookahead >= MIN_MATCH) {
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- }
- /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
- * but this is not important since only literal bytes will be emitted.
- */
-
- } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, eof) { \
- _tr_flush_block(s, (s->block_start >= 0L ? \
- (charf *)&s->window[(unsigned)s->block_start] : \
- (charf *)Z_NULL), \
- (ulg)((long)s->strstart - s->block_start), \
- (eof)); \
- s->block_start = s->strstart; \
- flush_pending(s->strm); \
- Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, eof) { \
- FLUSH_BLOCK_ONLY(s, eof); \
- if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
- deflate_state *s;
- int flush;
-{
- /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
- * to pending_buf_size, and each stored block has a 5 byte header:
- */
- ulg max_block_size = 0xffff;
- ulg max_start;
-
- if (max_block_size > s->pending_buf_size - 5) {
- max_block_size = s->pending_buf_size - 5;
- }
-
- /* Copy as much as possible from input to output: */
- for (;;) {
- /* Fill the window as much as possible: */
- if (s->lookahead <= 1) {
-
- Assert(s->strstart < s->w_size+MAX_DIST(s) ||
- s->block_start >= (long)s->w_size, "slide too late");
-
- fill_window(s);
- if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
- if (s->lookahead == 0) break; /* flush the current block */
- }
- Assert(s->block_start >= 0L, "block gone");
-
- s->strstart += s->lookahead;
- s->lookahead = 0;
-
- /* Emit a stored block if pending_buf will be full: */
- max_start = s->block_start + max_block_size;
- if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
- /* strstart == 0 is possible when wraparound on 16-bit machine */
- s->lookahead = (uInt)(s->strstart - max_start);
- s->strstart = (uInt)max_start;
- FLUSH_BLOCK(s, 0);
- }
- /* Flush if we may have to slide, otherwise block_start may become
- * negative and the data will be gone:
- */
- if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
- FLUSH_BLOCK(s, 0);
- }
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of the hash chain */
- int bflush; /* set if current block must be flushed */
-
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- * At this point we have always match_length < MIN_MATCH
- */
- if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- }
- /* longest_match() sets match_start */
- }
- if (s->match_length >= MIN_MATCH) {
- check_match(s, s->strstart, s->match_start, s->match_length);
-
- bflush = _tr_tally(s, s->strstart - s->match_start,
- s->match_length - MIN_MATCH);
-
- s->lookahead -= s->match_length;
-
- /* Insert new strings in the hash table only if the match length
- * is not too large. This saves time but degrades compression.
- */
- if (s->match_length <= s->max_insert_length &&
- s->lookahead >= MIN_MATCH) {
- s->match_length--; /* string at strstart already in hash table */
- do {
- s->strstart++;
- INSERT_STRING(s, s->strstart, hash_head);
- /* strstart never exceeds WSIZE-MAX_MATCH, so there are
- * always MIN_MATCH bytes ahead.
- */
- } while (--s->match_length != 0);
- s->strstart++;
- } else {
- s->strstart += s->match_length;
- s->match_length = 0;
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
- * matter since it will be recomputed at next deflate call.
- */
- }
- } else {
- /* No match, output a literal byte */
- Tracevv((stderr,"%c", s->window[s->strstart]));
- bflush = _tr_tally (s, 0, s->window[s->strstart]);
- s->lookahead--;
- s->strstart++;
- }
- if (bflush) FLUSH_BLOCK(s, 0);
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of hash chain */
- int bflush; /* set if current block must be flushed */
-
- /* Process the input block. */
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- */
- s->prev_length = s->match_length, s->prev_match = s->match_start;
- s->match_length = MIN_MATCH-1;
-
- if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
- s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- }
- /* longest_match() sets match_start */
-
- if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
- (s->match_length == MIN_MATCH &&
- s->strstart - s->match_start > TOO_FAR))) {
-
- /* If prev_match is also MIN_MATCH, match_start is garbage
- * but we will ignore the current match anyway.
- */
- s->match_length = MIN_MATCH-1;
- }
- }
- /* If there was a match at the previous step and the current
- * match is not better, output the previous match:
- */
- if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
- uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
- /* Do not insert strings in hash table beyond this. */
-
- check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
- bflush = _tr_tally(s, s->strstart -1 - s->prev_match,
- s->prev_length - MIN_MATCH);
-
- /* Insert in hash table all strings up to the end of the match.
- * strstart-1 and strstart are already inserted. If there is not
- * enough lookahead, the last two strings are not inserted in
- * the hash table.
- */
- s->lookahead -= s->prev_length-1;
- s->prev_length -= 2;
- do {
- if (++s->strstart <= max_insert) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
- } while (--s->prev_length != 0);
- s->match_available = 0;
- s->match_length = MIN_MATCH-1;
- s->strstart++;
-
- if (bflush) FLUSH_BLOCK(s, 0);
-
- } else if (s->match_available) {
- /* If there was no match at the previous position, output a
- * single literal. If there was a match but the current match
- * is longer, truncate the previous match to a single literal.
- */
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- if (_tr_tally (s, 0, s->window[s->strstart-1])) {
- FLUSH_BLOCK_ONLY(s, 0);
- }
- s->strstart++;
- s->lookahead--;
- if (s->strm->avail_out == 0) return need_more;
- } else {
- /* There is no previous match to compare with, wait for
- * the next step to decide.
- */
- s->match_available = 1;
- s->strstart++;
- s->lookahead--;
- }
- }
- Assert (flush != Z_NO_FLUSH, "no flush?");
- if (s->match_available) {
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- _tr_tally (s, 0, s->window[s->strstart-1]);
- s->match_available = 0;
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-/* --- deflate.c */
-
-/* +++ trees.c */
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * ALGORITHM
- *
- * The "deflation" process uses several Huffman trees. The more
- * common source values are represented by shorter bit sequences.
- *
- * Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values). The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- * Storer, James A.
- * Data Compression: Methods and Theory, pp. 49-50.
- * Computer Science Press, 1988. ISBN 0-7167-8156-5.
- *
- * Sedgewick, R.
- * Algorithms, p290.
- * Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* From: trees.c,v 1.11 1996/07/24 13:41:06 me Exp $ */
-
-/* #include "deflate.h" */
-
-#ifdef DEBUG_ZLIB
-# include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6 16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10 17
-/* repeat a zero length 3-10 times (3 bits of repeat count) */
-
-#define REPZ_11_138 18
-/* repeat a zero length 11-138 times (7 bits of repeat count) */
-
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
- = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
- = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
- = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local uch bl_order[BL_CODES]
- = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-struct static_tree_desc_s {
- ct_data *static_tree; /* static tree or NULL */
- intf *extra_bits; /* extra bits for each code or NULL */
- int extra_base; /* base index for extra_bits */
- int elems; /* max number of elements in the tree */
- int max_length; /* max bit length for the codes */
-};
-
-local static_tree_desc static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc static_d_desc =
-{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS};
-
-local static_tree_desc static_bl_desc =
-{(ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block OF((deflate_state *s));
-local void pqdownheap OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen OF((deflate_state *s, tree_desc *desc));
-local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree OF((deflate_state *s, tree_desc *desc));
-local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local int build_bl_tree OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
- int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
- ct_data *dtree));
-local void set_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup OF((deflate_state *s));
-local void bi_flush OF((deflate_state *s));
-local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
- int header));
-
-#ifndef DEBUG_ZLIB
-# define send_code(s, c, tree) send_bits(s, tree[(c)].Code, tree[(c)].Len)
- /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG_ZLIB */
-# define send_code(s, c, tree) \
- { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
- send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-#define d_code(dist) \
- ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
- put_byte(s, (uch)((w) & 0xff)); \
- put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-local void send_bits OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
- deflate_state *s;
- int value; /* value to send */
- int length; /* number of bits */
-{
- Tracevv((stderr," l %2d v %4x ", length, value));
- Assert(length > 0 && length <= 15, "invalid length");
- s->bits_sent += (ulg)length;
-
- /* If not enough room in bi_buf, use (valid) bits from bi_buf and
- * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
- * unused bits in value.
- */
- if (s->bi_valid > (int)Buf_size - length) {
- s->bi_buf |= (value << s->bi_valid);
- put_short(s, s->bi_buf);
- s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
- s->bi_valid += length - Buf_size;
- } else {
- s->bi_buf |= value << s->bi_valid;
- s->bi_valid += length;
- }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = (length);\
- if ((s)->bi_valid > (int)Buf_size - len) {\
- int val = (value);\
- (s)->bi_buf |= (val << (s)->bi_valid);\
- put_short((s), (s)->bi_buf);\
- (s)->bi_buf = (ush)val >> (Buf_size - (s)->bi_valid);\
- (s)->bi_valid += len - Buf_size;\
- } else {\
- (s)->bi_buf |= (value) << (s)->bi_valid;\
- (s)->bi_valid += len;\
- }\
-}
-#endif /* DEBUG_ZLIB */
-
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
- */
-local void tr_static_init()
-{
- static int static_init_done = 0;
- int n; /* iterates over tree elements */
- int bits; /* bit counter */
- int length; /* length value */
- int code; /* code value */
- int dist; /* distance index */
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- if (static_init_done) return;
-
- /* Initialize the mapping length (0..255) -> length code (0..28) */
- length = 0;
- for (code = 0; code < LENGTH_CODES-1; code++) {
- base_length[code] = length;
- for (n = 0; n < (1<<extra_lbits[code]); n++) {
- length_code[length++] = (uch)code;
- }
- }
- Assert (length == 256, "tr_static_init: length != 256");
- /* Note that the length 255 (match length 258) can be represented
- * in two different ways: code 284 + 5 bits or code 285, so we
- * overwrite length_code[255] to use the best encoding:
- */
- length_code[length-1] = (uch)code;
-
- /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
- dist = 0;
- for (code = 0 ; code < 16; code++) {
- base_dist[code] = dist;
- for (n = 0; n < (1<<extra_dbits[code]); n++) {
- dist_code[dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "tr_static_init: dist != 256");
- dist >>= 7; /* from now on, all distances are divided by 128 */
- for ( ; code < D_CODES; code++) {
- base_dist[code] = dist << 7;
- for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
- dist_code[256 + dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
- /* Construct the codes of the static literal tree */
- for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
- n = 0;
- while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
- while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
- while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
- while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
- /* Codes 286 and 287 do not exist, but we must include them in the
- * tree construction to get a canonical Huffman tree (longest code
- * all ones)
- */
- gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
- /* The static distance tree is trivial: */
- for (n = 0; n < D_CODES; n++) {
- static_dtree[n].Len = 5;
- static_dtree[n].Code = bi_reverse((unsigned)n, 5);
- }
- static_init_done = 1;
-}
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void _tr_init(s)
- deflate_state *s;
-{
- tr_static_init();
-
- s->compressed_len = 0L;
-
- s->l_desc.dyn_tree = s->dyn_ltree;
- s->l_desc.stat_desc = &static_l_desc;
-
- s->d_desc.dyn_tree = s->dyn_dtree;
- s->d_desc.stat_desc = &static_d_desc;
-
- s->bl_desc.dyn_tree = s->bl_tree;
- s->bl_desc.stat_desc = &static_bl_desc;
-
- s->bi_buf = 0;
- s->bi_valid = 0;
- s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG_ZLIB
- s->bits_sent = 0L;
-#endif
-
- /* Initialize the first block of the first file: */
- init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
- deflate_state *s;
-{
- int n; /* iterates over tree elements */
-
- /* Initialize the trees. */
- for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0;
- for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0;
- for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
- s->dyn_ltree[END_BLOCK].Freq = 1;
- s->opt_len = s->static_len = 0L;
- s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
- top = s->heap[SMALLEST]; \
- s->heap[SMALLEST] = s->heap[s->heap_len--]; \
- pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
- (tree[n].Freq < tree[m].Freq || \
- (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
- deflate_state *s;
- ct_data *tree; /* the tree to restore */
- int k; /* node to move down */
-{
- int v = s->heap[k];
- int j = k << 1; /* left son of k */
- while (j <= s->heap_len) {
- /* Set j to the smallest of the two sons: */
- if (j < s->heap_len &&
- smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
- j++;
- }
- /* Exit if v is smaller than both sons */
- if (smaller(tree, v, s->heap[j], s->depth)) break;
-
- /* Exchange v with the smallest son */
- s->heap[k] = s->heap[j]; k = j;
-
- /* And continue down the tree, setting j to the left son of k */
- j <<= 1;
- }
- s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- * above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- * array bl_count contains the frequencies for each bit length.
- * The length opt_len is updated; static_len is also updated if stree is
- * not null.
- */
-local void gen_bitlen(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- int max_code = desc->max_code;
- ct_data *stree = desc->stat_desc->static_tree;
- intf *extra = desc->stat_desc->extra_bits;
- int base = desc->stat_desc->extra_base;
- int max_length = desc->stat_desc->max_length;
- int h; /* heap index */
- int n, m; /* iterate over the tree elements */
- int bits; /* bit length */
- int xbits; /* extra bits */
- ush f; /* frequency */
- int overflow = 0; /* number of elements with bit length too large */
-
- for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
- /* In a first pass, compute the optimal bit lengths (which may
- * overflow in the case of the bit length tree).
- */
- tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
- for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
- n = s->heap[h];
- bits = tree[tree[n].Dad].Len + 1;
- if (bits > max_length) bits = max_length, overflow++;
- tree[n].Len = (ush)bits;
- /* We overwrite tree[n].Dad which is no longer needed */
-
- if (n > max_code) continue; /* not a leaf node */
-
- s->bl_count[bits]++;
- xbits = 0;
- if (n >= base) xbits = extra[n-base];
- f = tree[n].Freq;
- s->opt_len += (ulg)f * (bits + xbits);
- if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
- }
- if (overflow == 0) return;
-
- Trace((stderr,"\nbit length overflow\n"));
- /* This happens for example on obj2 and pic of the Calgary corpus */
-
- /* Find the first bit length which could increase: */
- do {
- bits = max_length-1;
- while (s->bl_count[bits] == 0) bits--;
- s->bl_count[bits]--; /* move one leaf down the tree */
- s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
- s->bl_count[max_length]--;
- /* The brother of the overflow item also moves one step up,
- * but this does not affect bl_count[max_length]
- */
- overflow -= 2;
- } while (overflow > 0);
-
- /* Now recompute all bit lengths, scanning in increasing frequency.
- * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
- * lengths instead of fixing only the wrong ones. This idea is taken
- * from 'ar' written by Haruhiko Okumura.)
- */
- for (bits = max_length; bits != 0; bits--) {
- n = s->bl_count[bits];
- while (n != 0) {
- m = s->heap[--h];
- if (m > max_code) continue;
- if (tree[m].Len != (unsigned) bits) {
- Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
- s->opt_len += ((long)bits - (long)tree[m].Len)
- *(long)tree[m].Freq;
- tree[m].Len = (ush)bits;
- }
- n--;
- }
- }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- * zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
- ct_data *tree; /* the tree to decorate */
- int max_code; /* largest code with non zero frequency */
- ushf *bl_count; /* number of codes at each bit length */
-{
- ush next_code[MAX_BITS+1]; /* next code value for each bit length */
- ush code = 0; /* running code value */
- int bits; /* bit index */
- int n; /* code index */
-
- /* The distribution counts are first used to generate the code values
- * without bit reversal.
- */
- for (bits = 1; bits <= MAX_BITS; bits++) {
- next_code[bits] = code = (code + bl_count[bits-1]) << 1;
- }
- /* Check that the bit counts in bl_count are consistent. The last code
- * must be all ones.
- */
- Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
- "inconsistent bit counts");
- Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
- for (n = 0; n <= max_code; n++) {
- int len = tree[n].Len;
- if (len == 0) continue;
- /* Now reverse the bits */
- tree[n].Code = bi_reverse(next_code[len]++, len);
-
- Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
- n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
- }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- * and corresponding code. The length opt_len is updated; static_len is
- * also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- ct_data *stree = desc->stat_desc->static_tree;
- int elems = desc->stat_desc->elems;
- int n, m; /* iterate over heap elements */
- int max_code = -1; /* largest code with non zero frequency */
- int node; /* new node being created */
-
- /* Construct the initial heap, with least frequent element in
- * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
- * heap[0] is not used.
- */
- s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
- for (n = 0; n < elems; n++) {
- if (tree[n].Freq != 0) {
- s->heap[++(s->heap_len)] = max_code = n;
- s->depth[n] = 0;
- } else {
- tree[n].Len = 0;
- }
- }
-
- /* The pkzip format requires that at least one distance code exists,
- * and that at least one bit should be sent even if there is only one
- * possible code. So to avoid special checks later on we force at least
- * two codes of non zero frequency.
- */
- while (s->heap_len < 2) {
- node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
- tree[node].Freq = 1;
- s->depth[node] = 0;
- s->opt_len--; if (stree) s->static_len -= stree[node].Len;
- /* node is 0 or 1 so it does not have extra bits */
- }
- desc->max_code = max_code;
-
- /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
- * establish sub-heaps of increasing lengths:
- */
- for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
- /* Construct the Huffman tree by repeatedly combining the least two
- * frequent nodes.
- */
- node = elems; /* next internal node of the tree */
- do {
- pqremove(s, tree, n); /* n = node of least frequency */
- m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
- s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
- s->heap[--(s->heap_max)] = m;
-
- /* Create a new node father of n and m */
- tree[node].Freq = tree[n].Freq + tree[m].Freq;
- s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
- tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
- if (tree == s->bl_tree) {
- fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
- node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
- }
-#endif
- /* and insert the new node in the heap */
- s->heap[SMALLEST] = node++;
- pqdownheap(s, tree, SMALLEST);
-
- } while (s->heap_len >= 2);
-
- s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
- /* At this point, the fields freq and dad are set. We can now
- * generate the bit lengths.
- */
- gen_bitlen(s, (tree_desc *)desc);
-
- /* The field len is now set, we can generate the bit codes */
- gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- if (nextlen == 0) max_count = 138, min_count = 3;
- tree[max_code+1].Len = (ush)0xffff; /* guard */
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- s->bl_tree[curlen].Freq += count;
- } else if (curlen != 0) {
- if (curlen != prevlen) s->bl_tree[curlen].Freq++;
- s->bl_tree[REP_3_6].Freq++;
- } else if (count <= 10) {
- s->bl_tree[REPZ_3_10].Freq++;
- } else {
- s->bl_tree[REPZ_11_138].Freq++;
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- /* tree[max_code+1].Len = -1; */ /* guard already set */
- if (nextlen == 0) max_count = 138, min_count = 3;
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
- } else if (curlen != 0) {
- if (curlen != prevlen) {
- send_code(s, curlen, s->bl_tree); count--;
- }
- Assert(count >= 3 && count <= 6, " 3_6?");
- send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
- } else if (count <= 10) {
- send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
- } else {
- send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
- deflate_state *s;
-{
- int max_blindex; /* index of last bit length code of non zero freq */
-
- /* Determine the bit length frequencies for literal and distance trees */
- scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
- scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
- /* Build the bit length tree: */
- build_tree(s, (tree_desc *)(&(s->bl_desc)));
- /* opt_len now includes the length of the tree representations, except
- * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
- */
-
- /* Determine the number of bit length codes to send. The pkzip format
- * requires that at least 4 bit length codes be sent. (appnote.txt says
- * 3 but the actual value used is 4.)
- */
- for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
- if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
- }
- /* Update opt_len to include the bit length tree and counts */
- s->opt_len += 3*(max_blindex+1) + 5+5+4;
- Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
- s->opt_len, s->static_len));
-
- return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
- deflate_state *s;
- int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
- int rank; /* index in bl_order */
-
- Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
- Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
- "too many codes");
- Tracev((stderr, "\nbl counts: "));
- send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
- send_bits(s, dcodes-1, 5);
- send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */
- for (rank = 0; rank < blcodes; rank++) {
- Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
- send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
- }
- Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
- Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
- Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void _tr_stored_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */
- s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
- s->compressed_len += (stored_len + 4) << 3;
-
- copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* Send just the `stored block' type code without any length bytes or data.
- */
-void _tr_stored_type_only(s)
- deflate_state *s;
-{
- send_bits(s, (STORED_BLOCK << 1), 3);
- bi_windup(s);
- s->compressed_len = (s->compressed_len + 3) & ~7L;
-}
-
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void _tr_align(s)
- deflate_state *s;
-{
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
- s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
- bi_flush(s);
- /* Of the 10 bits for the empty block, we have already sent
- * (10 - bi_valid) bits. The lookahead for the last real code (before
- * the EOB of the previous block) was thus at least one plus the length
- * of the EOB plus what we have just sent of the empty static block.
- */
- if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
- s->compressed_len += 10L;
- bi_flush(s);
- }
- s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
- */
-ulg _tr_flush_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block, or NULL if too old */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
- int max_blindex = 0; /* index of last bit length code of non zero freq */
-
- /* Build the Huffman trees unless a stored block is forced */
- if (s->level > 0) {
-
- /* Check if the file is ascii or binary */
- if (s->data_type == Z_UNKNOWN) set_data_type(s);
-
- /* Construct the literal and distance trees */
- build_tree(s, (tree_desc *)(&(s->l_desc)));
- Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
-
- build_tree(s, (tree_desc *)(&(s->d_desc)));
- Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
- /* At this point, opt_len and static_len are the total bit lengths of
- * the compressed block data, excluding the tree representations.
- */
-
- /* Build the bit length tree for the above two trees, and get the index
- * in bl_order of the last bit length code to send.
- */
- max_blindex = build_bl_tree(s);
-
- /* Determine the best encoding. Compute first the block length in bytes*/
- opt_lenb = (s->opt_len+3+7)>>3;
- static_lenb = (s->static_len+3+7)>>3;
-
- Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
- opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
- s->last_lit));
-
- if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
- } else {
- Assert(buf != (char*)0, "lost buf");
- opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
- }
-
- /* If compression failed and this is the first and last block,
- * and if the .zip file can be seeked (to rewrite the local header),
- * the whole file is transformed into a stored file:
- */
-#ifdef STORED_FILE_OK
-# ifdef FORCE_STORED_FILE
- if (eof && s->compressed_len == 0L) { /* force stored file */
-# else
- if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
-# endif
- /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
- if (buf == (charf*)0) error ("block vanished");
-
- copy_block(s, buf, (unsigned)stored_len, 0); /* without header */
- s->compressed_len = stored_len << 3;
- s->method = STORED;
- } else
-#endif /* STORED_FILE_OK */
-
-#ifdef FORCE_STORED
- if (buf != (char*)0) { /* force stored block */
-#else
- if (stored_len+4 <= opt_lenb && buf != (char*)0) {
- /* 4: two words for the lengths */
-#endif
- /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
- * Otherwise we can't have processed more than WSIZE input bytes since
- * the last block flush, because compression would have been
- * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
- * transform a block into a stored block.
- */
- _tr_stored_block(s, buf, stored_len, eof);
-
-#ifdef FORCE_STATIC
- } else if (static_lenb >= 0) { /* force static trees */
-#else
- } else if (static_lenb == opt_lenb) {
-#endif
- send_bits(s, (STATIC_TREES<<1)+eof, 3);
- compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
- s->compressed_len += 3 + s->static_len;
- } else {
- send_bits(s, (DYN_TREES<<1)+eof, 3);
- send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
- max_blindex+1);
- compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
- s->compressed_len += 3 + s->opt_len;
- }
- Assert (s->compressed_len == s->bits_sent, "bad compressed size");
- init_block(s);
-
- if (eof) {
- bi_windup(s);
- s->compressed_len += 7; /* align on byte boundary */
- }
- Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
- s->compressed_len-7*eof));
-
- return s->compressed_len >> 3;
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int _tr_tally (s, dist, lc)
- deflate_state *s;
- unsigned dist; /* distance of matched string */
- unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
- s->d_buf[s->last_lit] = (ush)dist;
- s->l_buf[s->last_lit++] = (uch)lc;
- if (dist == 0) {
- /* lc is the unmatched char */
- s->dyn_ltree[lc].Freq++;
- } else {
- s->matches++;
- /* Here, lc is the match length - MIN_MATCH */
- dist--; /* dist = match distance - 1 */
- Assert((ush)dist < (ush)MAX_DIST(s) &&
- (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
- (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match");
-
- s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
- s->dyn_dtree[d_code(dist)].Freq++;
- }
-
- /* Try to guess if it is profitable to stop the current block here */
- if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
- /* Compute an upper bound for the compressed length */
- ulg out_length = (ulg)s->last_lit*8L;
- ulg in_length = (ulg)((long)s->strstart - s->block_start);
- int dcode;
- for (dcode = 0; dcode < D_CODES; dcode++) {
- out_length += (ulg)s->dyn_dtree[dcode].Freq *
- (5L+extra_dbits[dcode]);
- }
- out_length >>= 3;
- Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
- s->last_lit, in_length, out_length,
- 100L - out_length*100L/in_length));
- if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
- }
- return (s->last_lit == s->lit_bufsize-1);
- /* We avoid equality with lit_bufsize because of wraparound at 64K
- * on 16 bit machines and because stored blocks are restricted to
- * 64K-1 bytes.
- */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
- deflate_state *s;
- ct_data *ltree; /* literal tree */
- ct_data *dtree; /* distance tree */
-{
- unsigned dist; /* distance of matched string */
- int lc; /* match length or unmatched char (if dist == 0) */
- unsigned lx = 0; /* running index in l_buf */
- unsigned code; /* the code to send */
- int extra; /* number of extra bits to send */
-
- if (s->last_lit != 0) do {
- dist = s->d_buf[lx];
- lc = s->l_buf[lx++];
- if (dist == 0) {
- send_code(s, lc, ltree); /* send a literal byte */
- Tracecv(isgraph(lc), (stderr," '%c' ", lc));
- } else {
- /* Here, lc is the match length - MIN_MATCH */
- code = length_code[lc];
- send_code(s, code+LITERALS+1, ltree); /* send the length code */
- extra = extra_lbits[code];
- if (extra != 0) {
- lc -= base_length[code];
- send_bits(s, lc, extra); /* send the extra length bits */
- }
- dist--; /* dist is now the match distance - 1 */
- code = d_code(dist);
- Assert (code < D_CODES, "bad d_code");
-
- send_code(s, code, dtree); /* send the distance code */
- extra = extra_dbits[code];
- if (extra != 0) {
- dist -= base_dist[code];
- send_bits(s, dist, extra); /* send the extra distance bits */
- }
- } /* literal or match pair ? */
-
- /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
- Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
- } while (lx < s->last_lit);
-
- send_code(s, END_BLOCK, ltree);
- s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
- deflate_state *s;
-{
- int n = 0;
- unsigned ascii_freq = 0;
- unsigned bin_freq = 0;
- while (n < 7) bin_freq += s->dyn_ltree[n++].Freq;
- while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq;
- while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
- s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
- unsigned code; /* the value to invert */
- int len; /* its bit length */
-{
- unsigned res = 0;
- do {
- res |= code & 1;
- code >>= 1, res <<= 1;
- } while (--len > 0);
- return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
- deflate_state *s;
-{
- if (s->bi_valid == 16) {
- put_short(s, s->bi_buf);
- s->bi_buf = 0;
- s->bi_valid = 0;
- } else if (s->bi_valid >= 8) {
- put_byte(s, (Byte)s->bi_buf);
- s->bi_buf >>= 8;
- s->bi_valid -= 8;
- }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
- deflate_state *s;
-{
- if (s->bi_valid > 8) {
- put_short(s, s->bi_buf);
- } else if (s->bi_valid > 0) {
- put_byte(s, (Byte)s->bi_buf);
- }
- s->bi_buf = 0;
- s->bi_valid = 0;
-#ifdef DEBUG_ZLIB
- s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
- deflate_state *s;
- charf *buf; /* the input data */
- unsigned len; /* its length */
- int header; /* true if block header must be written */
-{
- bi_windup(s); /* align on byte boundary */
- s->last_eob_len = 8; /* enough lookahead for inflate */
-
- if (header) {
- put_short(s, (ush)len);
- put_short(s, (ush)~len);
-#ifdef DEBUG_ZLIB
- s->bits_sent += 2*16;
-#endif
- }
-#ifdef DEBUG_ZLIB
- s->bits_sent += (ulg)len<<3;
-#endif
- /* bundle up the put_byte(s, *buf++) calls */
- zmemcpy(&s->pending_buf[s->pending], buf, len);
- s->pending += len;
-}
-/* --- trees.c */
-
-/* +++ inflate.c */
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-
-/* +++ infblock.h */
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-extern inflate_blocks_statef * inflate_blocks_new OF((
- z_streamp z,
- check_func c, /* check function */
- uInt w)); /* window size */
-
-extern int inflate_blocks OF((
- inflate_blocks_statef *,
- z_streamp ,
- int)); /* initial return code */
-
-extern void inflate_blocks_reset OF((
- inflate_blocks_statef *,
- z_streamp ,
- uLongf *)); /* check value on output */
-
-extern int inflate_blocks_free OF((
- inflate_blocks_statef *,
- z_streamp ,
- uLongf *)); /* check value on output */
-
-extern void inflate_set_dictionary OF((
- inflate_blocks_statef *s,
- const Bytef *d, /* dictionary */
- uInt n)); /* dictionary length */
-
-extern int inflate_addhistory OF((
- inflate_blocks_statef *,
- z_streamp));
-
-extern int inflate_packet_flush OF((
- inflate_blocks_statef *));
-/* --- infblock.h */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* inflate private state */
-struct internal_state {
-
- /* mode */
- enum {
- METHOD, /* waiting for method byte */
- FLAG, /* waiting for flag byte */
- DICT4, /* four dictionary check bytes to go */
- DICT3, /* three dictionary check bytes to go */
- DICT2, /* two dictionary check bytes to go */
- DICT1, /* one dictionary check byte to go */
- DICT0, /* waiting for inflateSetDictionary */
- BLOCKS, /* decompressing blocks */
- CHECK4, /* four check bytes to go */
- CHECK3, /* three check bytes to go */
- CHECK2, /* two check bytes to go */
- CHECK1, /* one check byte to go */
- DONE, /* finished check, done */
- BAD} /* got an error--stay here */
- mode; /* current inflate mode */
-
- /* mode dependent information */
- union {
- uInt method; /* if FLAGS, method byte */
- struct {
- uLong was; /* computed check value */
- uLong need; /* stream check value */
- } check; /* if CHECK, check values to compare */
- uInt marker; /* if BAD, inflateSync's marker bytes count */
- } sub; /* submode */
-
- /* mode independent information */
- int nowrap; /* flag for no wrapper */
- uInt wbits; /* log2(window size) (8..15, defaults to 15) */
- inflate_blocks_statef
- *blocks; /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_streamp z;
-{
- uLong c;
-
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- z->total_in = z->total_out = 0;
- z->msg = Z_NULL;
- z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
- inflate_blocks_reset(z->state->blocks, z, &c);
- Trace((stderr, "inflate: reset\n"));
- return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_streamp z;
-{
- uLong c;
-
- if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->blocks != Z_NULL)
- inflate_blocks_free(z->state->blocks, z, &c);
- ZFREE(z, z->state);
- z->state = Z_NULL;
- Trace((stderr, "inflate: end\n"));
- return Z_OK;
-}
-
-
-int inflateInit2_(z, w, version, stream_size)
-z_streamp z;
-int w;
-const char *version;
-int stream_size;
-{
- if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
- stream_size != sizeof(z_stream))
- return Z_VERSION_ERROR;
-
- /* initialize state */
- if (z == Z_NULL)
- return Z_STREAM_ERROR;
- z->msg = Z_NULL;
-#ifndef NO_ZCFUNCS
- if (z->zalloc == Z_NULL)
- {
- z->zalloc = zcalloc;
- z->opaque = (voidpf)0;
- }
- if (z->zfree == Z_NULL) z->zfree = zcfree;
-#endif
- if ((z->state = (struct internal_state FAR *)
- ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
- return Z_MEM_ERROR;
- z->state->blocks = Z_NULL;
-
- /* handle undocumented nowrap option (no zlib header or check) */
- z->state->nowrap = 0;
- if (w < 0)
- {
- w = - w;
- z->state->nowrap = 1;
- }
-
- /* set window size */
- if (w < 8 || w > 15)
- {
- inflateEnd(z);
- return Z_STREAM_ERROR;
- }
- z->state->wbits = (uInt)w;
-
- /* create inflate_blocks state */
- if ((z->state->blocks =
- inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
- == Z_NULL)
- {
- inflateEnd(z);
- return Z_MEM_ERROR;
- }
- Trace((stderr, "inflate: allocated\n"));
-
- /* reset state */
- inflateReset(z);
- return Z_OK;
-}
-
-
-int inflateInit_(z, version, stream_size)
-z_streamp z;
-const char *version;
-int stream_size;
-{
- return inflateInit2_(z, DEF_WBITS, version, stream_size);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_streamp z;
-int f;
-{
- int r;
- uInt b;
-
- if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0)
- return Z_STREAM_ERROR;
- r = Z_BUF_ERROR;
- while (1) switch (z->state->mode)
- {
- case METHOD:
- NEEDBYTE
- if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
- {
- z->state->mode = BAD;
- z->msg = (char*)"unknown compression method";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
- {
- z->state->mode = BAD;
- z->msg = (char*)"invalid window size";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- z->state->mode = FLAG;
- case FLAG:
- NEEDBYTE
- b = NEXTBYTE;
- if (((z->state->sub.method << 8) + b) % 31)
- {
- z->state->mode = BAD;
- z->msg = (char*)"incorrect header check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Trace((stderr, "inflate: zlib header ok\n"));
- if (!(b & PRESET_DICT))
- {
- z->state->mode = BLOCKS;
- break;
- }
- z->state->mode = DICT4;
- case DICT4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = DICT3;
- case DICT3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = DICT2;
- case DICT2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = DICT1;
- case DICT1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
- z->adler = z->state->sub.check.need;
- z->state->mode = DICT0;
- return Z_NEED_DICT;
- case DICT0:
- z->state->mode = BAD;
- z->msg = (char*)"need dictionary";
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_STREAM_ERROR;
- case BLOCKS:
- r = inflate_blocks(z->state->blocks, z, r);
- if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
- r = inflate_packet_flush(z->state->blocks);
- if (r == Z_DATA_ERROR)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- break;
- }
- if (r != Z_STREAM_END)
- return r;
- r = Z_OK;
- inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
- if (z->state->nowrap)
- {
- z->state->mode = DONE;
- break;
- }
- z->state->mode = CHECK4;
- case CHECK4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = CHECK3;
- case CHECK3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = CHECK2;
- case CHECK2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = CHECK1;
- case CHECK1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
-
- if (z->state->sub.check.was != z->state->sub.check.need)
- {
- z->state->mode = BAD;
- z->msg = (char*)"incorrect data check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Trace((stderr, "inflate: zlib check ok\n"));
- z->state->mode = DONE;
- case DONE:
- return Z_STREAM_END;
- case BAD:
- return Z_DATA_ERROR;
- default:
- return Z_STREAM_ERROR;
- }
-
- empty:
- if (f != Z_PACKET_FLUSH)
- return r;
- z->state->mode = BAD;
- z->msg = (char *)"need more for packet flush";
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_DATA_ERROR;
-}
-
-
-int inflateSetDictionary(z, dictionary, dictLength)
-z_streamp z;
-const Bytef *dictionary;
-uInt dictLength;
-{
- uInt length = dictLength;
-
- if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
- return Z_STREAM_ERROR;
-
- if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
- z->adler = 1L;
-
- if (length >= ((uInt)1<<z->state->wbits))
- {
- length = (1<<z->state->wbits)-1;
- dictionary += dictLength - length;
- }
- inflate_set_dictionary(z->state->blocks, dictionary, length);
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(z)
-z_stream *z;
-{
- if (z->state->mode != BLOCKS)
- return Z_DATA_ERROR;
- return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(z)
-z_streamp z;
-{
- uInt n; /* number of bytes to look at */
- Bytef *p; /* pointer to bytes */
- uInt m; /* number of marker bytes found in a row */
- uLong r, w; /* temporaries to save total_in and total_out */
-
- /* set up */
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->mode != BAD)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0;
- }
- if ((n = z->avail_in) == 0)
- return Z_BUF_ERROR;
- p = z->next_in;
- m = z->state->sub.marker;
-
- /* search */
- while (n && m < 4)
- {
- if (*p == (Byte)(m < 2 ? 0 : 0xff))
- m++;
- else if (*p)
- m = 0;
- else
- m = 4 - m;
- p++, n--;
- }
-
- /* restore */
- z->total_in += p - z->next_in;
- z->next_in = p;
- z->avail_in = n;
- z->state->sub.marker = m;
-
- /* return no joy or set up to restart on a new block */
- if (m != 4)
- return Z_DATA_ERROR;
- r = z->total_in; w = z->total_out;
- inflateReset(z);
- z->total_in = r; z->total_out = w;
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-/* --- inflate.c */
-
-/* +++ infblock.c */
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "infblock.h" */
-
-/* +++ inftrees.h */
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
- that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
- union {
- struct {
- Byte Exop; /* number of extra bits or operation */
- Byte Bits; /* number of bits in this code or subcode */
- } what;
- Bytef *pad; /* pad structure to a power of 2 (4 bytes for */
- } word; /* 16-bit, 8 bytes for 32-bit machines) */
- union {
- uInt Base; /* literal, length base, or distance base */
- inflate_huft *Next; /* pointer to next level of table */
- } more;
-};
-
-#ifdef DEBUG_ZLIB
- extern uInt inflate_hufts;
-#endif
-
-extern int inflate_trees_bits OF((
- uIntf *, /* 19 code lengths */
- uIntf *, /* bits tree desired/actual depth */
- inflate_huft * FAR *, /* bits tree result */
- z_streamp )); /* for zalloc, zfree functions */
-
-extern int inflate_trees_dynamic OF((
- uInt, /* number of literal/length codes */
- uInt, /* number of distance codes */
- uIntf *, /* that many (total) code lengths */
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *, /* distance tree result */
- z_streamp )); /* for zalloc, zfree functions */
-
-extern int inflate_trees_fixed OF((
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *)); /* distance tree result */
-
-extern int inflate_trees_free OF((
- inflate_huft *, /* tables to free */
- z_streamp )); /* for zfree function */
-
-/* --- inftrees.h */
-
-/* +++ infcodes.h */
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-extern inflate_codes_statef *inflate_codes_new OF((
- uInt, uInt,
- inflate_huft *, inflate_huft *,
- z_streamp ));
-
-extern int inflate_codes OF((
- inflate_blocks_statef *,
- z_streamp ,
- int));
-
-extern void inflate_codes_free OF((
- inflate_codes_statef *,
- z_streamp ));
-
-/* --- infcodes.h */
-
-/* +++ infutil.h */
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
- TYPE, /* get type bits (3, including end bit) */
- LENS, /* get lengths for stored */
- STORED, /* processing stored block */
- TABLE, /* get table lengths */
- BTREE, /* get bit lengths tree for a dynamic block */
- DTREE, /* get length, distance trees for a dynamic block */
- CODES, /* processing fixed or dynamic block */
- DRY, /* output remaining window bytes */
- DONEB, /* finished last block, done */
- BADB} /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
- /* mode */
- inflate_block_mode mode; /* current inflate_block mode */
-
- /* mode dependent information */
- union {
- uInt left; /* if STORED, bytes left to copy */
- struct {
- uInt table; /* table lengths (14 bits) */
- uInt index; /* index into blens (or border) */
- uIntf *blens; /* bit lengths of codes */
- uInt bb; /* bit length tree depth */
- inflate_huft *tb; /* bit length decoding tree */
- } trees; /* if DTREE, decoding info for trees */
- struct {
- inflate_huft *tl;
- inflate_huft *td; /* trees to free */
- inflate_codes_statef
- *codes;
- } decode; /* if CODES, current state */
- } sub; /* submode */
- uInt last; /* true if this block is the last block */
-
- /* mode independent information */
- uInt bitk; /* bits in bit buffer */
- uLong bitb; /* bit buffer */
- Bytef *window; /* sliding window */
- Bytef *end; /* one byte after sliding window */
- Bytef *read; /* window read pointer */
- Bytef *write; /* window write pointer */
- check_func checkfn; /* check function */
- uLong check; /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/* update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/* get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/* output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WWRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WWRAP if(m==0){FLUSH WWRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/* load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt inflate_mask[17];
-
-/* copy as much as possible from the sliding window to the output area */
-extern int inflate_flush OF((
- inflate_blocks_statef *,
- z_streamp ,
- int));
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-#endif
-/* --- infutil.h */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local const uInt border[] = { /* Order of the bit length code lengths */
- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
- Notes beyond the 1.93a appnote.txt:
-
- 1. Distance pointers never point before the beginning of the output
- stream.
- 2. Distance pointers can point back across blocks, up to 32k away.
- 3. There is an implied maximum of 7 bits for the bit length table and
- 15 bits for the actual data.
- 4. If only one code exists, then it is encoded using one bit. (Zero
- would be more efficient, but perhaps a little confusing.) If two
- codes exist, they are coded using one bit each (0 and 1).
- 5. There is no way of sending zero distance codes--a dummy must be
- sent if there are none. (History: a pre 2.0 version of PKZIP would
- store blocks with no distance codes, but this was discovered to be
- too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
- zero distance codes, which is sent as one code of zero bits in
- length.
- 6. There are up to 286 literal/length codes. Code 256 represents the
- end-of-block. Note however that the static length tree defines
- 288 codes just to fill out the Huffman codes. Codes 286 and 287
- cannot be used though, since there is no length base or extra bits
- defined for them. Similarily, there are up to 30 distance codes.
- However, static trees define 32 codes (all 5 bits) to fill out the
- Huffman codes, but the last two had better not show up in the data.
- 7. Unzip can check dynamic Huffman blocks for complete code sets.
- The exception is that a single code would not be complete (see #4).
- 8. The five bits following the block type is really the number of
- literal codes sent minus 257.
- 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
- (1+6+6). Therefore, to output three times the length, you output
- three codes (1+1+1), whereas to output four times the same length,
- you only need two codes (1+3). Hmm.
- 10. In the tree reconstruction algorithm, Code = Code + Increment
- only if BitLength(i) is not zero. (Pretty obvious.)
- 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
- 12. Note: length code 284 can represent 227-258, but length code 285
- really is 258. The last length deserves its own, short code
- since it gets used a lot in very redundant files. The length
- 258 is special since 258 - 3 (the min match length) is 255.
- 13. The literal/length and distance code bit lengths are read as a
- single stream of lengths. It is possible (and advantageous) for
- a repeat code (16, 17, or 18) to go across the boundary between
- the two sets of lengths.
- */
-
-
-void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
- if (s->checkfn != Z_NULL)
- *c = s->check;
- if (s->mode == BTREE || s->mode == DTREE)
- ZFREE(z, s->sub.trees.blens);
- if (s->mode == CODES)
- {
- inflate_codes_free(s->sub.decode.codes, z);
- inflate_trees_free(s->sub.decode.td, z);
- inflate_trees_free(s->sub.decode.tl, z);
- }
- s->mode = TYPE;
- s->bitk = 0;
- s->bitb = 0;
- s->read = s->write = s->window;
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0);
- Trace((stderr, "inflate: blocks reset\n"));
-}
-
-
-inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_streamp z;
-check_func c;
-uInt w;
-{
- inflate_blocks_statef *s;
-
- if ((s = (inflate_blocks_statef *)ZALLOC
- (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
- return s;
- if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
- {
- ZFREE(z, s);
- return Z_NULL;
- }
- s->end = s->window + w;
- s->checkfn = c;
- s->mode = TYPE;
- Trace((stderr, "inflate: blocks allocated\n"));
- inflate_blocks_reset(s, z, &s->check);
- return s;
-}
-
-
-#ifdef DEBUG_ZLIB
- extern uInt inflate_hufts;
-#endif
-int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt t; /* temporary storage */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input based on current state */
- while (1) switch (s->mode)
- {
- case TYPE:
- NEEDBITS(3)
- t = (uInt)b & 7;
- s->last = t & 1;
- switch (t >> 1)
- {
- case 0: /* stored */
- Trace((stderr, "inflate: stored block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- t = k & 7; /* go to byte boundary */
- DUMPBITS(t)
- s->mode = LENS; /* get length of stored block */
- break;
- case 1: /* fixed */
- Trace((stderr, "inflate: fixed codes block%s\n",
- s->last ? " (last)" : ""));
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
-
- inflate_trees_fixed(&bl, &bd, &tl, &td);
- s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
- if (s->sub.decode.codes == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.decode.tl = Z_NULL; /* don't try to free these */
- s->sub.decode.td = Z_NULL;
- }
- DUMPBITS(3)
- s->mode = CODES;
- break;
- case 2: /* dynamic */
- Trace((stderr, "inflate: dynamic codes block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- s->mode = TABLE;
- break;
- case 3: /* illegal */
- DUMPBITS(3)
- s->mode = BADB;
- z->msg = (char*)"invalid block type";
- r = Z_DATA_ERROR;
- LEAVE
- }
- break;
- case LENS:
- NEEDBITS(32)
- if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
- {
- s->mode = BADB;
- z->msg = (char*)"invalid stored block lengths";
- r = Z_DATA_ERROR;
- LEAVE
- }
- s->sub.left = (uInt)b & 0xffff;
- b = k = 0; /* dump bits */
- Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
- s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
- break;
- case STORED:
- if (n == 0)
- LEAVE
- NEEDOUT
- t = s->sub.left;
- if (t > n) t = n;
- if (t > m) t = m;
- zmemcpy(q, p, t);
- p += t; n -= t;
- q += t; m -= t;
- if ((s->sub.left -= t) != 0)
- break;
- Tracev((stderr, "inflate: stored end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- s->mode = s->last ? DRY : TYPE;
- break;
- case TABLE:
- NEEDBITS(14)
- s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
- if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
- {
- s->mode = BADB;
- z->msg = (char*)"too many length or distance symbols";
- r = Z_DATA_ERROR;
- LEAVE
- }
-#endif
- t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
- if (t < 19)
- t = 19;
- if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- DUMPBITS(14)
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: table sizes ok\n"));
- s->mode = BTREE;
- case BTREE:
- while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
- {
- NEEDBITS(3)
- s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
- DUMPBITS(3)
- }
- while (s->sub.trees.index < 19)
- s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
- s->sub.trees.bb = 7;
- t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
- &s->sub.trees.tb, z);
- if (t != Z_OK)
- {
- r = t;
- if (r == Z_DATA_ERROR) {
- ZFREE(z, s->sub.trees.blens);
- s->mode = BADB;
- }
- LEAVE
- }
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: bits tree ok\n"));
- s->mode = DTREE;
- case DTREE:
- while (t = s->sub.trees.table,
- s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
- {
- inflate_huft *h;
- uInt i, j, c;
-
- t = s->sub.trees.bb;
- NEEDBITS(t)
- h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
- t = h->word.what.Bits;
- c = h->more.Base;
- if (c < 16)
- {
- DUMPBITS(t)
- s->sub.trees.blens[s->sub.trees.index++] = c;
- }
- else /* c == 16..18 */
- {
- i = c == 18 ? 7 : c - 14;
- j = c == 18 ? 11 : 3;
- NEEDBITS(t + i)
- DUMPBITS(t)
- j += (uInt)b & inflate_mask[i];
- DUMPBITS(i)
- i = s->sub.trees.index;
- t = s->sub.trees.table;
- if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
- (c == 16 && i < 1))
- {
- inflate_trees_free(s->sub.trees.tb, z);
- ZFREE(z, s->sub.trees.blens);
- s->mode = BADB;
- z->msg = (char*)"invalid bit length repeat";
- r = Z_DATA_ERROR;
- LEAVE
- }
- c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
- do {
- s->sub.trees.blens[i++] = c;
- } while (--j);
- s->sub.trees.index = i;
- }
- }
- inflate_trees_free(s->sub.trees.tb, z);
- s->sub.trees.tb = Z_NULL;
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
- inflate_codes_statef *c;
-
- bl = 9; /* must be <= 9 for lookahead assumptions */
- bd = 6; /* must be <= 9 for lookahead assumptions */
- t = s->sub.trees.table;
-#ifdef DEBUG_ZLIB
- inflate_hufts = 0;
-#endif
- t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
- s->sub.trees.blens, &bl, &bd, &tl, &td, z);
- if (t != Z_OK)
- {
- if (t == (uInt)Z_DATA_ERROR) {
- ZFREE(z, s->sub.trees.blens);
- s->mode = BADB;
- }
- r = t;
- LEAVE
- }
- Tracev((stderr, "inflate: trees ok, %d * %d bytes used\n",
- inflate_hufts, sizeof(inflate_huft)));
- if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
- {
- inflate_trees_free(td, z);
- inflate_trees_free(tl, z);
- r = Z_MEM_ERROR;
- LEAVE
- }
- /*
- * this ZFREE must occur *BEFORE* we mess with sub.decode, because
- * sub.trees is union'd with sub.decode.
- */
- ZFREE(z, s->sub.trees.blens);
- s->sub.decode.codes = c;
- s->sub.decode.tl = tl;
- s->sub.decode.td = td;
- }
- s->mode = CODES;
- case CODES:
- UPDATE
- if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
- return inflate_flush(s, z, r);
- r = Z_OK;
- inflate_codes_free(s->sub.decode.codes, z);
- inflate_trees_free(s->sub.decode.td, z);
- inflate_trees_free(s->sub.decode.tl, z);
- LOAD
- Tracev((stderr, "inflate: codes end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- if (!s->last)
- {
- s->mode = TYPE;
- break;
- }
- if (k > 7) /* return unused byte, if any */
- {
- Assert(k < 16, "inflate_codes grabbed too many bytes")
- k -= 8;
- n++;
- p--; /* can always return one */
- }
- s->mode = DRY;
- case DRY:
- FLUSH
- if (s->read != s->write)
- LEAVE
- s->mode = DONEB;
- case DONEB:
- r = Z_STREAM_END;
- LEAVE
- case BADB:
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
- inflate_blocks_reset(s, z, c);
- ZFREE(z, s->window);
- ZFREE(z, s);
- Trace((stderr, "inflate: blocks freed\n"));
- return Z_OK;
-}
-
-
-void inflate_set_dictionary(s, d, n)
-inflate_blocks_statef *s;
-const Bytef *d;
-uInt n;
-{
- zmemcpy((charf *)s->window, d, n);
- s->read = s->write = s->window + n;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-int inflate_addhistory(s, z)
-inflate_blocks_statef *s;
-z_stream *z;
-{
- uLong b; /* bit buffer */ /* NOT USED HERE */
- uInt k; /* bits in bit buffer */ /* NOT USED HERE */
- uInt t; /* temporary storage */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- if (s->read != s->write)
- return Z_STREAM_ERROR;
- if (s->mode != TYPE)
- return Z_DATA_ERROR;
-
- /* we're ready to rock */
- LOAD
- /* while there is input ready, copy to output buffer, moving
- * pointers as needed.
- */
- while (n) {
- t = n; /* how many to do */
- /* is there room until end of buffer? */
- if (t > m) t = m;
- /* update check information */
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(s->check, q, t);
- zmemcpy(q, p, t);
- q += t;
- p += t;
- n -= t;
- z->total_out += t;
- s->read = q; /* drag read pointer forward */
-/* WWRAP */ /* expand WWRAP macro by hand to handle s->read */
- if (q == s->end) {
- s->read = q = s->window;
- m = WAVAIL;
- }
- }
- UPDATE
- return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-int inflate_packet_flush(s)
- inflate_blocks_statef *s;
-{
- if (s->mode != LENS)
- return Z_DATA_ERROR;
- s->mode = TYPE;
- return Z_OK;
-}
-/* --- infblock.c */
-
-/* +++ inftrees.c */
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-
-char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
- uIntf *, /* code lengths in bits */
- uInt, /* number of codes */
- uInt, /* number of "simple" codes */
- const uIntf *, /* list of base values for non-simple codes */
- const uIntf *, /* list of extra bits for non-simple codes */
- inflate_huft * FAR*,/* result: starting table */
- uIntf *, /* maximum lookup bits (returns actual) */
- z_streamp )); /* for zalloc function */
-
-local voidpf falloc OF((
- voidpf, /* opaque pointer (not used) */
- uInt, /* number of items */
- uInt)); /* size of item */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- /* see note #13 above about 258 */
-local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577};
-local const uInt cpdext[30] = { /* Extra bits for distance codes */
- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
- 12, 12, 13, 13};
-
-/*
- Huffman code decoding is performed using a multi-level table lookup.
- The fastest way to decode is to simply build a lookup table whose
- size is determined by the longest code. However, the time it takes
- to build this table can also be a factor if the data being decoded
- is not very long. The most common codes are necessarily the
- shortest codes, so those codes dominate the decoding time, and hence
- the speed. The idea is you can have a shorter table that decodes the
- shorter, more probable codes, and then point to subsidiary tables for
- the longer codes. The time it costs to decode the longer codes is
- then traded against the time it takes to make longer tables.
-
- This results of this trade are in the variables lbits and dbits
- below. lbits is the number of bits the first level table for literal/
- length codes can decode in one step, and dbits is the same thing for
- the distance codes. Subsequent tables are also less than or equal to
- those sizes. These values may be adjusted either when all of the
- codes are shorter than that, in which case the longest code length in
- bits is used, or when the shortest code is *longer* than the requested
- table size, in which case the length of the shortest code in bits is
- used.
-
- There are two different values for the two tables, since they code a
- different number of possibilities each. The literal/length table
- codes 286 possible values, or in a flat code, a little over eight
- bits. The distance table codes 30 possible values, or a little less
- than five bits, flat. The optimum values for speed end up being
- about one bit more than those, so lbits is 8+1 and dbits is 5+1.
- The optimum values may differ though from machine to machine, and
- possibly even between compilers. Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15 /* maximum bit length of any code */
-#define N_MAX 288 /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
- uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b; /* code lengths in bits (all assumed <= BMAX) */
-uInt n; /* number of codes (assumed <= N_MAX) */
-uInt s; /* number of simple-valued codes (0..s-1) */
-const uIntf *d; /* list of base values for non-simple codes */
-const uIntf *e; /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t; /* result: starting table */
-uIntf *m; /* maximum lookup bits, returns actual */
-z_streamp zs; /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
- tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
- if the given code set is incomplete (the tables are still built in this
- case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of
- lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
- uInt a; /* counter for codes of length k */
- uInt c[BMAX+1]; /* bit length count table */
- uInt f; /* i repeats in table every f entries */
- int g; /* maximum code length */
- int h; /* table level */
- uInt i; /* counter, current code */
- uInt j; /* counter */
- int k; /* number of bits in current code */
- int l; /* bits per table (returned in m) */
- uIntf *p; /* pointer into c[], b[], or v[] */
- inflate_huft *q; /* points to current table */
- struct inflate_huft_s r; /* table entry for structure assignment */
- inflate_huft *u[BMAX]; /* table stack */
- uInt v[N_MAX]; /* values in order of bit length */
- int w; /* bits before this table == (l * h) */
- uInt x[BMAX+1]; /* bit offsets, then code stack */
- uIntf *xp; /* pointer into x */
- int y; /* number of dummy codes added */
- uInt z; /* number of entries in current table */
-
-
- /* Generate counts for each bit length */
- p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
- C4 /* clear c[]--assume BMAX+1 is 16 */
- p = b; i = n;
- do {
- c[*p++]++; /* assume all entries <= BMAX */
- } while (--i);
- if (c[0] == n) /* null input--all zero length codes */
- {
- *t = (inflate_huft *)Z_NULL;
- *m = 0;
- return Z_OK;
- }
-
-
- /* Find minimum and maximum length, bound *m by those */
- l = *m;
- for (j = 1; j <= BMAX; j++)
- if (c[j])
- break;
- k = j; /* minimum code length */
- if ((uInt)l < j)
- l = j;
- for (i = BMAX; i; i--)
- if (c[i])
- break;
- g = i; /* maximum code length */
- if ((uInt)l > i)
- l = i;
- *m = l;
-
-
- /* Adjust last length count to fill out codes, if needed */
- for (y = 1 << j; j < i; j++, y <<= 1)
- if ((y -= c[j]) < 0)
- return Z_DATA_ERROR;
- if ((y -= c[i]) < 0)
- return Z_DATA_ERROR;
- c[i] += y;
-
-
- /* Generate starting offsets into the value table for each length */
- x[1] = j = 0;
- p = c + 1; xp = x + 2;
- while (--i) { /* note that i == g from above */
- *xp++ = (j += *p++);
- }
-
-
- /* Make a table of values in order of bit lengths */
- p = b; i = 0;
- do {
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
- n = x[g]; /* set n to length of v */
-
-
- /* Generate the Huffman codes and for each, make the table entries */
- x[0] = i = 0; /* first Huffman code is zero */
- p = v; /* grab values in bit order */
- h = -1; /* no tables yet--level -1 */
- w = -l; /* bits decoded == (l * h) */
- u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */
- q = (inflate_huft *)Z_NULL; /* ditto */
- z = 0; /* ditto */
-
- /* go through the bit lengths (k already is bits in shortest code) */
- for (; k <= g; k++)
- {
- a = c[k];
- while (a--)
- {
- /* here i is the Huffman code of length k bits for value *p */
- /* make tables up to required level */
- while (k > w + l)
- {
- h++;
- w += l; /* previous table always l bits */
-
- /* compute minimum size table less than or equal to l bits */
- z = g - w;
- z = z > (uInt)l ? l : z; /* table size upper limit */
- if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
- { /* too few codes for k-w bit table */
- f -= a + 1; /* deduct codes from patterns left */
- xp = c + k;
- if (j < z)
- while (++j < z) /* try smaller tables up to z bits */
- {
- if ((f <<= 1) <= *++xp)
- break; /* enough codes to use up j bits */
- f -= *xp; /* else deduct codes from patterns */
- }
- }
- z = 1 << j; /* table entries for j-bit table */
-
- /* allocate and link in new table */
- if ((q = (inflate_huft *)ZALLOC
- (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
- {
- if (h)
- inflate_trees_free(u[0], zs);
- return Z_MEM_ERROR; /* not enough memory */
- }
-#ifdef DEBUG_ZLIB
- inflate_hufts += z + 1;
-#endif
- *t = q + 1; /* link to list for huft_free() */
- *(t = &(q->next)) = Z_NULL;
- u[h] = ++q; /* table starts after link */
-
- /* connect to last table, if there is one */
- if (h)
- {
- x[h] = i; /* save pattern for backing up */
- r.bits = (Byte)l; /* bits to dump before this table */
- r.exop = (Byte)j; /* bits in this table */
- r.next = q; /* pointer to this table */
- j = i >> (w - l); /* (get around Turbo C bug) */
- u[h-1][j] = r; /* connect to last table */
- }
- }
-
- /* set up table entry in r */
- r.bits = (Byte)(k - w);
- if (p >= v + n)
- r.exop = 128 + 64; /* out of values--invalid code */
- else if (*p < s)
- {
- r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
- r.base = *p++; /* simple code is just the value */
- }
- else
- {
- r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
- r.base = d[*p++ - s];
- }
-
- /* fill code-like entries with r */
- f = 1 << (k - w);
- for (j = i >> w; j < z; j += f)
- q[j] = r;
-
- /* backwards increment the k-bit code i */
- for (j = 1 << (k - 1); i & j; j >>= 1)
- i ^= j;
- i ^= j;
-
- /* backup over finished tables */
- while ((i & ((1 << w) - 1)) != x[h])
- {
- h--; /* don't need to update q */
- w -= l;
- }
- }
- }
-
-
- /* Return Z_BUF_ERROR if we were given an incomplete table */
- return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-int inflate_trees_bits(c, bb, tb, z)
-uIntf *c; /* 19 code lengths */
-uIntf *bb; /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_streamp z; /* for zfree function */
-{
- int r;
-
- r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed dynamic bit lengths tree";
- else if (r == Z_BUF_ERROR || *bb == 0)
- {
- inflate_trees_free(*tb, z);
- z->msg = (char*)"incomplete dynamic bit lengths tree";
- r = Z_DATA_ERROR;
- }
- return r;
-}
-
-
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl; /* number of literal/length codes */
-uInt nd; /* number of distance codes */
-uIntf *c; /* that many (total) code lengths */
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_streamp z; /* for zfree function */
-{
- int r;
-
- /* build literal/length tree */
- r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z);
- if (r != Z_OK || *bl == 0)
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed literal/length tree";
- else if (r != Z_MEM_ERROR)
- {
- inflate_trees_free(*tl, z);
- z->msg = (char*)"incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- return r;
- }
-
- /* build distance tree */
- r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z);
- if (r != Z_OK || (*bd == 0 && nl > 257))
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed distance tree";
- else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
- r = Z_OK;
- }
-#else
- inflate_trees_free(*td, z);
- z->msg = (char*)"incomplete distance tree";
- r = Z_DATA_ERROR;
- }
- else if (r != Z_MEM_ERROR)
- {
- z->msg = (char*)"empty distance tree with lengths";
- r = Z_DATA_ERROR;
- }
- inflate_trees_free(*tl, z);
- return r;
-#endif
- }
-
- /* done */
- return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_built = 0;
-#define FIXEDH 530 /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q; /* opaque pointer */
-uInt n; /* number of items */
-uInt s; /* size of item */
-{
- Assert(s == sizeof(inflate_huft) && n <= *(intf *)q,
- "inflate_trees falloc overflow");
- *(intf *)q -= n+s-s; /* s-s to avoid warning */
- return (voidpf)(fixed_mem + *(intf *)q);
-}
-
-
-int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-{
- /* build fixed tables if not already (multiple overlapped executions ok) */
- if (!fixed_built)
- {
- int k; /* temporary variable */
- unsigned c[288]; /* length list for huft_build */
- z_stream z; /* for falloc function */
- int f = FIXEDH; /* number of hufts left in fixed_mem */
-
- /* set up fake z_stream for memory routines */
- z.zalloc = falloc;
- z.zfree = Z_NULL;
- z.opaque = (voidpf)&f;
-
- /* literal table */
- for (k = 0; k < 144; k++)
- c[k] = 8;
- for (; k < 256; k++)
- c[k] = 9;
- for (; k < 280; k++)
- c[k] = 7;
- for (; k < 288; k++)
- c[k] = 8;
- fixed_bl = 7;
- huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
- /* distance table */
- for (k = 0; k < 30; k++)
- c[k] = 5;
- fixed_bd = 5;
- huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
- /* done */
- Assert(f == 0, "invalid build of fixed tables");
- fixed_built = 1;
- }
- *bl = fixed_bl;
- *bd = fixed_bd;
- *tl = fixed_tl;
- *td = fixed_td;
- return Z_OK;
-}
-
-
-int inflate_trees_free(t, z)
-inflate_huft *t; /* table to free */
-z_streamp z; /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
- list of the tables it made, with the links in a dummy first entry of
- each table. */
-{
- inflate_huft *p, *q, *r;
-
- /* Reverse linked list */
- p = Z_NULL;
- q = t;
- while (q != Z_NULL)
- {
- r = (q - 1)->next;
- (q - 1)->next = p;
- p = q;
- q = r;
- }
- /* Go through linked list, freeing from the malloced (t[-1]) address. */
- while (p != Z_NULL)
- {
- q = (--p)->next;
- ZFREE(z,p);
- p = q;
- }
- return Z_OK;
-}
-/* --- inftrees.c */
-
-/* +++ infcodes.c */
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-/* #include "infblock.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-
-/* +++ inffast.h */
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-extern int inflate_fast OF((
- uInt,
- uInt,
- inflate_huft *,
- inflate_huft *,
- inflate_blocks_statef *,
- z_streamp ));
-/* --- inffast.h */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
- /* mode */
- enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- START, /* x: set up for LEN */
- LEN, /* i: get length/literal/eob next */
- LENEXT, /* i: getting length extra (have base) */
- DIST, /* i: get distance next */
- DISTEXT, /* i: getting distance extra */
- COPY, /* o: copying bytes in window, waiting for space */
- LIT, /* o: got literal, waiting for output space */
- WASH, /* o: got eob, possibly still output waiting */
- END, /* x: got eob and all data flushed */
- BADCODE} /* x: got error */
- mode; /* current inflate_codes mode */
-
- /* mode dependent information */
- uInt len;
- union {
- struct {
- inflate_huft *tree; /* pointer into tree */
- uInt need; /* bits needed */
- } code; /* if LEN or DIST, where in tree */
- uInt lit; /* if LIT, literal */
- struct {
- uInt get; /* bits to get for extra */
- uInt dist; /* distance back to copy from */
- } copy; /* if EXT or COPY, where and how much */
- } sub; /* submode */
-
- /* mode independent information */
- Byte lbits; /* ltree bits decoded per branch */
- Byte dbits; /* dtree bits decoder per branch */
- inflate_huft *ltree; /* literal/length/eob tree */
- inflate_huft *dtree; /* distance tree */
-
-};
-
-
-inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-z_streamp z;
-{
- inflate_codes_statef *c;
-
- if ((c = (inflate_codes_statef *)
- ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
- {
- c->mode = START;
- c->lbits = (Byte)bl;
- c->dbits = (Byte)bd;
- c->ltree = tl;
- c->dtree = td;
- Tracev((stderr, "inflate: codes new\n"));
- }
- return c;
-}
-
-
-int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt j; /* temporary storage */
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- Bytef *f; /* pointer to copy strings from */
- inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input and output based on current state */
- while (1) switch (c->mode)
- { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- case START: /* x: set up for LEN */
-#ifndef SLOW
- if (m >= 258 && n >= 10)
- {
- UPDATE
- r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
- LOAD
- if (r != Z_OK)
- {
- c->mode = r == Z_STREAM_END ? WASH : BADCODE;
- break;
- }
- }
-#endif /* !SLOW */
- c->sub.code.need = c->lbits;
- c->sub.code.tree = c->ltree;
- c->mode = LEN;
- case LEN: /* i: get length/literal/eob next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e == 0) /* literal */
- {
- c->sub.lit = t->base;
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", t->base));
- c->mode = LIT;
- break;
- }
- if (e & 16) /* length */
- {
- c->sub.copy.get = e & 15;
- c->len = t->base;
- c->mode = LENEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t->next;
- break;
- }
- if (e & 32) /* end of block */
- {
- Tracevv((stderr, "inflate: end of block\n"));
- c->mode = WASH;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid literal/length code";
- r = Z_DATA_ERROR;
- LEAVE
- case LENEXT: /* i: getting length extra (have base) */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->len += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- c->sub.code.need = c->dbits;
- c->sub.code.tree = c->dtree;
- Tracevv((stderr, "inflate: length %u\n", c->len));
- c->mode = DIST;
- case DIST: /* i: get distance next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e & 16) /* distance */
- {
- c->sub.copy.get = e & 15;
- c->sub.copy.dist = t->base;
- c->mode = DISTEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t->next;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid distance code";
- r = Z_DATA_ERROR;
- LEAVE
- case DISTEXT: /* i: getting distance extra */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->sub.copy.dist += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
- c->mode = COPY;
- case COPY: /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
- f = (uInt)(q - s->window) < c->sub.copy.dist ?
- s->end - (c->sub.copy.dist - (q - s->window)) :
- q - c->sub.copy.dist;
-#else
- f = q - c->sub.copy.dist;
- if ((uInt)(q - s->window) < c->sub.copy.dist)
- f = s->end - (c->sub.copy.dist - (uInt)(q - s->window));
-#endif
- while (c->len)
- {
- NEEDOUT
- OUTBYTE(*f++)
- if (f == s->end)
- f = s->window;
- c->len--;
- }
- c->mode = START;
- break;
- case LIT: /* o: got literal, waiting for output space */
- NEEDOUT
- OUTBYTE(c->sub.lit)
- c->mode = START;
- break;
- case WASH: /* o: got eob, possibly more output */
- FLUSH
- if (s->read != s->write)
- LEAVE
- c->mode = END;
- case END:
- r = Z_STREAM_END;
- LEAVE
- case BADCODE: /* x: got error */
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_streamp z;
-{
- ZFREE(z, c);
- Tracev((stderr, "inflate: codes free\n"));
-}
-/* --- infcodes.c */
-
-/* +++ infutil.c */
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "infblock.h" */
-/* #include "inftrees.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* And'ing with mask[n] masks the lower n bits */
-uInt inflate_mask[17] = {
- 0x0000,
- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt n;
- Bytef *p;
- Bytef *q;
-
- /* local copies of source and destination pointers */
- p = z->next_out;
- q = s->read;
-
- /* compute number of bytes to copy as far as end of window */
- n = (uInt)((q <= s->write ? s->write : s->end) - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy as far as end of window */
- if (p != Z_NULL) {
- zmemcpy(p, q, n);
- p += n;
- }
- q += n;
-
- /* see if more to copy at beginning of window */
- if (q == s->end)
- {
- /* wrap pointers */
- q = s->window;
- if (s->write == s->end)
- s->write = s->window;
-
- /* compute bytes to copy */
- n = (uInt)(s->write - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy */
- if (p != Z_NULL) {
- zmemcpy(p, q, n);
- p += n;
- }
- q += n;
- }
-
- /* update pointers */
- z->next_out = p;
- s->read = q;
-
- /* done */
- return r;
-}
-/* --- infutil.c */
-
-/* +++ inffast.c */
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-/* #include "infblock.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-/* #include "inffast.h" */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
- (the maximum string length) and number of input bytes available
- at least ten. The ten bytes are six bytes for the longest length/
- distance pair plus four bytes for overloading the bit buffer. */
-
-int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-inflate_blocks_statef *s;
-z_streamp z;
-{
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- uInt ml; /* mask for literal/length tree */
- uInt md; /* mask for distance tree */
- uInt c; /* bytes to copy */
- uInt d; /* distance back to copy from */
- Bytef *r; /* copy source pointer */
-
- /* load input, output, bit values */
- LOAD
-
- /* initialize masks */
- ml = inflate_mask[bl];
- md = inflate_mask[bd];
-
- /* do until not enough input or output space for fast loop */
- do { /* assume called with m >= 258 && n >= 10 */
- /* get literal/length code */
- GRABBITS(20) /* max bits for literal/length code */
- if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- continue;
- }
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits for length */
- e &= 15;
- c = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * length %u\n", c));
-
- /* decode distance base of block to copy */
- GRABBITS(15); /* max bits for distance code */
- e = (t = td + ((uInt)b & md))->exop;
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits to add to distance base */
- e &= 15;
- GRABBITS(e) /* get extra bits (up to 13) */
- d = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * distance %u\n", d));
-
- /* do the copy */
- m -= c;
- if ((uInt)(q - s->window) >= d) /* offset before dest */
- { /* just copy */
- r = q - d;
- *q++ = *r++; c--; /* minimum count is three, */
- *q++ = *r++; c--; /* so unroll loop a little */
- }
- else /* else offset after destination */
- {
- e = d - (uInt)(q - s->window); /* bytes from offset to end */
- r = s->end - e; /* pointer to offset */
- if (c > e) /* if source crosses, */
- {
- c -= e; /* copy to end of window */
- do {
- *q++ = *r++;
- } while (--e);
- r = s->window; /* copy rest from start of window */
- }
- }
- do { /* copy all or what's left */
- *q++ = *r++;
- } while (--c);
- break;
- }
- else if ((e & 64) == 0)
- e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
- else
- {
- z->msg = (char*)"invalid distance code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- break;
- }
- if ((e & 64) == 0)
- {
- if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- break;
- }
- }
- else if (e & 32)
- {
- Tracevv((stderr, "inflate: * end of block\n"));
- UNGRAB
- UPDATE
- return Z_STREAM_END;
- }
- else
- {
- z->msg = (char*)"invalid literal/length code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- } while (m >= 258 && n >= 10);
-
- /* not enough input or output--restore pointers and return */
- UNGRAB
- UPDATE
- return Z_OK;
-}
-/* --- inffast.c */
-
-/* +++ zutil.c */
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zutil.c,v 1.17 1996/07/24 13:41:12 me Exp $ */
-
-#ifdef DEBUG_ZLIB
-#include <stdio.h>
-#endif
-
-/* #include "zutil.h" */
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-#ifndef STDC
-extern void exit OF((int));
-#endif
-
-static const char *z_errmsg[10] = {
-"need dictionary", /* Z_NEED_DICT 2 */
-"stream end", /* Z_STREAM_END 1 */
-"", /* Z_OK 0 */
-"file error", /* Z_ERRNO (-1) */
-"stream error", /* Z_STREAM_ERROR (-2) */
-"data error", /* Z_DATA_ERROR (-3) */
-"insufficient memory", /* Z_MEM_ERROR (-4) */
-"buffer error", /* Z_BUF_ERROR (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-
-const char *zlibVersion()
-{
- return ZLIB_VERSION;
-}
-
-#ifdef DEBUG_ZLIB
-void z_error (m)
- char *m;
-{
- fprintf(stderr, "%s\n", m);
- exit(1);
-}
-#endif
-
-#ifndef HAVE_MEMCPY
-
-void zmemcpy(dest, source, len)
- Bytef* dest;
- Bytef* source;
- uInt len;
-{
- if (len == 0) return;
- do {
- *dest++ = *source++; /* ??? to be unrolled */
- } while (--len != 0);
-}
-
-int zmemcmp(s1, s2, len)
- Bytef* s1;
- Bytef* s2;
- uInt len;
-{
- uInt j;
-
- for (j = 0; j < len; j++) {
- if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
- }
- return 0;
-}
-
-void zmemzero(dest, len)
- Bytef* dest;
- uInt len;
-{
- if (len == 0) return;
- do {
- *dest++ = 0; /* ??? to be unrolled */
- } while (--len != 0);
-}
-#endif
-
-#ifdef __TURBOC__
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
-# define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
- voidpf org_ptr;
- voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
- voidpf buf = opaque; /* just to make some compilers happy */
- ulg bsize = (ulg)items*size;
-
- /* If we allocate less than 65520 bytes, we assume that farmalloc
- * will return a usable pointer which doesn't have to be normalized.
- */
- if (bsize < 65520L) {
- buf = farmalloc(bsize);
- if (*(ush*)&buf != 0) return buf;
- } else {
- buf = farmalloc(bsize + 16L);
- }
- if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
- table[next_ptr].org_ptr = buf;
-
- /* Normalize the pointer to seg:0 */
- *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
- *(ush*)&buf = 0;
- table[next_ptr++].new_ptr = buf;
- return buf;
-}
-
-void zcfree (voidpf opaque, voidpf ptr)
-{
- int n;
- if (*(ush*)&ptr != 0) { /* object < 64K */
- farfree(ptr);
- return;
- }
- /* Find the original pointer */
- for (n = 0; n < next_ptr; n++) {
- if (ptr != table[n].new_ptr) continue;
-
- farfree(table[n].org_ptr);
- while (++n < next_ptr) {
- table[n-1] = table[n];
- }
- next_ptr--;
- return;
- }
- ptr = opaque; /* just to make some compilers happy */
- Assert(0, "zcfree: ptr not found");
-}
-#endif
-#endif /* __TURBOC__ */
-
-
-#if defined(M_I86) && !defined(__32BIT__)
-/* Microsoft C in 16-bit mode */
-
-# define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER < 600))
-# define _halloc halloc
-# define _hfree hfree
-#endif
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
- if (opaque) opaque = 0; /* to make compiler happy */
- return _halloc((long)items, size);
-}
-
-void zcfree (voidpf opaque, voidpf ptr)
-{
- if (opaque) opaque = 0; /* to make compiler happy */
- _hfree(ptr);
-}
-
-#endif /* MSC */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp calloc OF((uInt items, uInt size));
-extern void free OF((voidpf ptr));
-#endif
-
-voidpf zcalloc (opaque, items, size)
- voidpf opaque;
- unsigned items;
- unsigned size;
-{
- if (opaque) items += size - size; /* make compiler happy */
- return (voidpf)calloc(items, size);
-}
-
-void zcfree (opaque, ptr)
- voidpf opaque;
- voidpf ptr;
-{
- free(ptr);
- if (opaque) return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
-/* --- zutil.c */
-
-/* +++ adler32.c */
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: adler32.c,v 1.10 1996/05/22 11:52:18 me Exp $ */
-
-/* #include "zlib.h" */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i) {s1 += buf[(i)]; s2 += s1;}
-#define DO2(buf,i) DO1(buf,i); DO1(buf,(i)+1);
-#define DO4(buf,i) DO2(buf,i); DO2(buf,(i)+2);
-#define DO8(buf,i) DO4(buf,i); DO4(buf,(i)+4);
-#define DO16(buf) DO8(buf,0); DO8(buf,8);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
- uLong adler;
- const Bytef *buf;
- uInt len;
-{
- unsigned long s1 = adler & 0xffff;
- unsigned long s2 = (adler >> 16) & 0xffff;
- int k;
-
- if (buf == Z_NULL) return 1L;
-
- while (len > 0) {
- k = len < NMAX ? len : NMAX;
- len -= k;
- while (k >= 16) {
- DO16(buf);
- buf += 16;
- k -= 16;
- }
- if (k != 0) do {
- s1 += *buf++;
- s2 += s1;
- } while (--k);
- s1 %= BASE;
- s2 %= BASE;
- }
- return (s2 << 16) | s1;
-}
-/* --- adler32.c */
-
-#ifdef _KERNEL
-static int
-zlib_modevent(module_t mod, int type, void *unused)
-{
- switch (type) {
- case MOD_LOAD:
- return 0;
- case MOD_UNLOAD:
- return 0;
- }
- return EINVAL;
-}
-
-static moduledata_t zlib_mod = {
- "zlib",
- zlib_modevent,
- 0
-};
-DECLARE_MODULE(zlib, zlib_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
-MODULE_VERSION(zlib, 1);
-#endif /* _KERNEL */
Index: sys/modules/bxe/Makefile
===================================================================
--- sys/modules/bxe/Makefile
+++ sys/modules/bxe/Makefile
@@ -17,6 +17,7 @@
57712_init_values.c
CFLAGS += -I${BXE}
+CFLAGS += -I${SRCTOP}/contrib/zlib -I${SRCTOP}/sys/contrib/zstd/lib/freebsd
.include <bsd.kmod.mk>
CWARNFLAGS+= ${NO_WUNUSED_BUT_SET_VARIABLE}
Index: sys/modules/crypto/Makefile
===================================================================
--- sys/modules/crypto/Makefile
+++ sys/modules/crypto/Makefile
@@ -23,6 +23,7 @@
SRCS = crypto.c cryptodev_if.c
SRCS += criov.c cryptosoft.c xform.c
SRCS += cast.c cryptodeflate.c rmd160.c rijndael-alg-fst.c rijndael-api.c rijndael-api-fst.c
+CFLAGS.cryptodeflate.c += -I${SRCTOP}/contrib/zlib -I${SRCTOP}/sys/contrib/zstd/lib/freebsd -DZ_PREFIX -DNO_GZIP
SRCS += skipjack.c bf_enc.c bf_ecb.c bf_skey.c
SRCS += camellia.c camellia-api.c
SRCS += des_ecb.c des_enc.c des_setkey.c
Index: sys/modules/geom/geom_uzip/Makefile
===================================================================
--- sys/modules/geom/geom_uzip/Makefile
+++ sys/modules/geom/geom_uzip/Makefile
@@ -10,7 +10,8 @@
.PATH: ${SRCTOP}/sys/net
-CFLAGS+= -I${SRCTOP}/sys/contrib/xz-embedded/freebsd \
+CFLAGS.g_uzip_zlib.c += -I${SRCTOP}/contrib/zlib -I${SRCTOP}/sys/contrib/zstd/lib/freebsd -DZ_PREFIX
+CFLAGS.g_uzip_lzma.c+= -I${SRCTOP}/sys/contrib/xz-embedded/freebsd \
-I${SRCTOP}/sys/contrib/xz-embedded/linux/lib/xz/
SRCS+= opt_geom.h
Index: sys/modules/mxge/mxge/Makefile
===================================================================
--- sys/modules/mxge/mxge/Makefile
+++ sys/modules/mxge/mxge/Makefile
@@ -5,4 +5,6 @@
KMOD= if_mxge
SRCS= if_mxge.c device_if.h bus_if.h pci_if.h opt_inet.h opt_inet6.h
+CFLAGS.if_mxge.c += -I${SRCTOP}/contrib/zlib -I${SRCTOP}/sys/contrib/zstd/lib/freebsd -DZ_PREFIX
+
.include <bsd.kmod.mk>
Index: sys/modules/zfs/Makefile
===================================================================
--- sys/modules/zfs/Makefile
+++ sys/modules/zfs/Makefile
@@ -54,17 +54,6 @@
SRCS+= list.c
SRCS+= nvpair_alloc_system.c
-.PATH: ${SUNW}/uts/common/zmod
-SRCS+= adler32.c
-SRCS+= opensolaris_crc32.c
-SRCS+= deflate.c
-SRCS+= inffast.c
-SRCS+= inflate.c
-SRCS+= inftrees.c
-SRCS+= trees.c
-SRCS+= zmod.c
-SRCS+= zmod_subr.c
-SRCS+= zutil.c
.PATH: ${SYSDIR}/crypto/sha2
SRCS+= sha256c.c sha512c.c
@@ -89,7 +78,6 @@
CFLAGS+=-I${SYSDIR}/cddl/compat/opensolaris
CFLAGS+=-I${SUNW}/uts/common/fs/zfs
CFLAGS+=-I${SUNW}/uts/common/fs/zfs/lua
-CFLAGS+=-I${SUNW}/uts/common/zmod
CFLAGS+=-I${SUNW}/uts/common
CFLAGS+=-I${SYSDIR}
CFLAGS+=-I${SUNW}/common/zfs
Index: sys/modules/zlib/Makefile
===================================================================
--- sys/modules/zlib/Makefile
+++ sys/modules/zlib/Makefile
@@ -1,8 +1,22 @@
# $FreeBSD$
.PATH: ${SRCTOP}/sys/libkern
+.PATH: ${SRCTOP}/contrib/zlib
KMOD= zlib
-SRCS= zlib.c
+SRCS= kern_zlib.c
+SRCS+= adler32.c
+SRCS+= deflate.c
+SRCS+= inffast.c
+SRCS+= inflate.c
+SRCS+= inftrees.c
+SRCS+= trees.c
+SRCS+= zutil.c
+
+CFLAGS+= -I${SRCTOP}/contrib/zlib
+CFLAGS+= -I${SRCTOP}/sys/contrib/zstd/lib/freebsd
+CFLAGS+= -DZ_PREFIX
+
+CWARNFLAGS+= -Wno-cast-qual # deflate.c:415
.include <bsd.kmod.mk>
Index: sys/netgraph/ng_deflate.c
===================================================================
--- sys/netgraph/ng_deflate.c
+++ sys/netgraph/ng_deflate.c
@@ -41,7 +41,6 @@
#include <sys/endian.h>
#include <sys/errno.h>
#include <sys/syslog.h>
-#include <sys/zlib.h>
#include <netgraph/ng_message.h>
#include <netgraph/netgraph.h>
@@ -53,6 +52,8 @@
static MALLOC_DEFINE(M_NETGRAPH_DEFLATE, "netgraph_deflate",
"netgraph deflate node");
+#include "netgraph/zlib.c"
+
/* DEFLATE header length */
#define DEFLATE_HDRLEN 2
@@ -697,4 +698,3 @@
inflateReset(&priv->cx);
}
}
-
Index: sys/netgraph/zlib.c
===================================================================
--- sys/netgraph/zlib.c
+++ sys/netgraph/zlib.c
@@ -54,7 +54,7 @@
#define _Z_UTIL_H
#ifdef _KERNEL
-#include <sys/zlib.h>
+#include <netgraph/zlib.h>
#else
#include "zlib.h"
#endif
Index: sys/netinet/libalias/alias_sctp.c
===================================================================
--- sys/netinet/libalias/alias_sctp.c
+++ sys/netinet/libalias/alias_sctp.c
@@ -75,6 +75,7 @@
#ifdef _KERNEL
#include <machine/stdarg.h>
#include <sys/param.h>
+#include <sys/crc32.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
Index: sys/netinet/sctp_crc32.c
===================================================================
--- sys/netinet/sctp_crc32.c
+++ sys/netinet/sctp_crc32.c
@@ -38,11 +38,13 @@
#include "opt_sctp.h"
#ifdef SCTP
+#include <sys/crc32.h>
#include <netinet/sctp_os.h>
#include <netinet/sctp.h>
#include <netinet/sctp_crc32.h>
#include <netinet/sctp_pcb.h>
#else
+#include <sys/crc32.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
Index: sys/opencrypto/cryptodeflate.c
===================================================================
--- sys/opencrypto/cryptodeflate.c
+++ sys/opencrypto/cryptodeflate.c
@@ -29,7 +29,7 @@
/*
* This file contains a wrapper around the deflate algo compression
- * functions using the zlib library (see libkern/zlib.c and sys/zlib.h})
+ * functions using the zlib library (see contrib/zlib)
*/
#include <sys/cdefs.h>
@@ -42,7 +42,7 @@
#include <sys/kernel.h>
#include <sys/sdt.h>
#include <sys/systm.h>
-#include <sys/zlib.h>
+#include <zlib.h>
#include <opencrypto/cryptodev.h>
#include <opencrypto/deflate.h>
@@ -122,7 +122,7 @@
zbuf.avail_out = bufp->size;
error = decomp ? inflateInit2(&zbuf, window_inflate) :
- deflateInit2(&zbuf, Z_DEFAULT_COMPRESSION, Z_METHOD,
+ z_deflateInit2(&zbuf, Z_DEFAULT_COMPRESSION, Z_METHOD,
window_deflate, Z_MEMLEVEL, Z_DEFAULT_STRATEGY);
if (error != Z_OK) {
SDT_PROBE5(opencrypto, deflate, deflate_global, bad,
@@ -141,17 +141,17 @@
SDT_PROBE5(opencrypto, deflate, deflate_global, bad,
decomp, error, __LINE__,
zbuf.avail_in, zbuf.avail_out);
- SDT_PROBE5(opencrypto, deflate, deflate_global, bad,
+ SDT_PROBE4(opencrypto, deflate, deflate_global, bad,
decomp, error, __LINE__,
- zbuf.state->dummy, zbuf.total_out);
+ zbuf.total_out);
goto bad;
}
SDT_PROBE5(opencrypto, deflate, deflate_global, iter,
decomp, error, __LINE__,
zbuf.avail_in, zbuf.avail_out);
- SDT_PROBE5(opencrypto, deflate, deflate_global, iter,
+ SDT_PROBE4(opencrypto, deflate, deflate_global, iter,
decomp, error, __LINE__,
- zbuf.state->dummy, zbuf.total_out);
+ zbuf.total_out);
if (decomp && zbuf.avail_in == 0 && error == Z_STREAM_END) {
/* Done. */
break;
@@ -184,9 +184,9 @@
SDT_PROBE5(opencrypto, deflate, deflate_global, bad,
decomp, error, __LINE__,
zbuf.avail_in, zbuf.avail_out);
- SDT_PROBE5(opencrypto, deflate, deflate_global, bad,
+ SDT_PROBE4(opencrypto, deflate, deflate_global, bad,
decomp, error, __LINE__,
- zbuf.state->dummy, zbuf.total_out);
+ zbuf.total_out);
goto bad;
}
}
Index: sys/opencrypto/deflate.h
===================================================================
--- sys/opencrypto/deflate.h
+++ sys/opencrypto/deflate.h
@@ -36,8 +36,6 @@
#ifndef _CRYPTO_DEFLATE_H_
#define _CRYPTO_DEFLATE_H_
-#include <sys/zlib.h>
-
#define Z_METHOD 8
#define Z_MEMLEVEL 8
#define MINCOMP 2 /* won't be used, but must be defined */
Index: sys/sys/crc32.h
===================================================================
--- /dev/null
+++ sys/sys/crc32.h
@@ -0,0 +1,73 @@
+/*-
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright (c) 1992, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)libkern.h 8.1 (Berkeley) 6/10/93
+ * $FreeBSD$
+ */
+
+#ifndef _SYS_KERN_CRC32_H_
+#define _SYS_KERN_CRC32_H_
+
+#include <sys/types.h>
+
+extern const uint32_t crc32_tab[];
+
+static __inline uint32_t
+crc32_raw(const void *buf, size_t size, uint32_t crc)
+{
+ const uint8_t *p = (const uint8_t *)buf;
+
+ while (size--)
+ crc = crc32_tab[(crc ^ *p++) & 0xFF] ^ (crc >> 8);
+ return (crc);
+}
+
+static __inline uint32_t
+crc32(const void *buf, size_t size)
+{
+ uint32_t crc;
+
+ crc = crc32_raw(buf, size, ~0U);
+ return (crc ^ ~0U);
+}
+
+uint32_t
+calculate_crc32c(uint32_t crc32c, const unsigned char *buffer,
+ unsigned int length);
+#ifdef _KERNEL
+#if defined(__amd64__) || defined(__i386__)
+uint32_t sse42_crc32c(uint32_t, const unsigned char *, unsigned);
+#endif
+#if defined(__aarch64__)
+uint32_t armv8_crc32c(uint32_t, const unsigned char *, unsigned int);
+#endif
+#endif
+
+#endif /* !_SYS_KERN_CRC32_H_ */
Index: sys/sys/kern_zlib.h
===================================================================
--- /dev/null
+++ sys/sys/kern_zlib.h
@@ -0,0 +1,36 @@
+/* $FreeBSD$ */
+
+#ifndef KERN_ZLIB_H
+#define KERN_ZLIB_H
+
+/*
+* #1 - sys/crc32.h is split out of sys/libkern.h to avoid conflicts
+* between zlib's crc32 and system crc32.
+* #2 - Use contrib/zstd/lib/freebsd's stdlib compatible includes.
+* #3 - ZLIB_C is created con/kern.pre.mk to share compile paths.
+* -I contrib/zlib
+* -I sys/contrib/zstd/lib/freebsd
+* #4 - sys/zlib.h defines these.
+* Z_PREIFX
+* #5 - opencryptodeflate.c
+* zfs.state->dummy is an address and doesn't seem to be useful.
+* Its DTRACE probe is removed.
+* #6 - netgraph/deflate.c needs and uses FreeBSD enhancements to zlib.
+* Moved sys/zlib.h to netgraph/zlib.h, sys/libkern/zlib.c to
+* netgraph/zlib.c, and netgraph/deflate.c includes netgraph/zlib.c
+* to compile as a part of deflate.c.
+* We may consider dropping functions with the same implementation
+* as contrib/zlib from netgraph/zlib.c. However, this efforts
+* require exposing static functions to general public.
+*
+* TODOs
+* #1 - Should we move contrib/zlib to sys/contrib/zlib?
+* #2 - zfs has its own copy of zlib, too.
+* - sys/cddl/contrib/opensolaris/uts/common/zmod has zlib
+* version 1.2.3 in 2005
+* #3 - GZIP APIs are redefined in multiple places as static functions.
+*/
+
+#define Z_PREFIX
+
+#endif
Index: sys/sys/libkern.h
===================================================================
--- sys/sys/libkern.h
+++ sys/sys/libkern.h
@@ -190,39 +190,6 @@
char *strstr(const char *, const char *);
int strvalid(const char *, size_t);
-extern const uint32_t crc32_tab[];
-
-static __inline uint32_t
-crc32_raw(const void *buf, size_t size, uint32_t crc)
-{
- const uint8_t *p = (const uint8_t *)buf;
-
- while (size--)
- crc = crc32_tab[(crc ^ *p++) & 0xFF] ^ (crc >> 8);
- return (crc);
-}
-
-static __inline uint32_t
-crc32(const void *buf, size_t size)
-{
- uint32_t crc;
-
- crc = crc32_raw(buf, size, ~0U);
- return (crc ^ ~0U);
-}
-
-uint32_t
-calculate_crc32c(uint32_t crc32c, const unsigned char *buffer,
- unsigned int length);
-#ifdef _KERNEL
-#if defined(__amd64__) || defined(__i386__)
-uint32_t sse42_crc32c(uint32_t, const unsigned char *, unsigned);
-#endif
-#if defined(__aarch64__)
-uint32_t armv8_crc32c(uint32_t, const unsigned char *, unsigned int);
-#endif
-#endif
-
static __inline char *
index(const char *p, int ch)
{
Index: sys/sys/zlib.h
===================================================================
--- sys/sys/zlib.h
+++ sys/sys/zlib.h
@@ -1,1020 +0,0 @@
-/* $FreeBSD$ */
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- * ==FILEVERSION 971127==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-
-/* +++ zlib.h */
-/*-
- SPDX-License-Identifier: BSD-3-Clause
-
- zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.0.4, Jul 24th, 1996.
-
- Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- gzip@prep.ai.mit.edu madler@alumni.caltech.edu
-*/
-/*
- The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
- (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* +++ zconf.h */
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zconf.h,v 1.20 1996/07/02 15:09:28 me Exp $ */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- */
-#ifdef Z_PREFIX
-# define deflateInit_ z_deflateInit_
-# define deflate z_deflate
-# define deflateEnd z_deflateEnd
-# define inflateInit_ z_inflateInit_
-# define inflate z_inflate
-# define inflateEnd z_inflateEnd
-# define deflateInit2_ z_deflateInit2_
-# define deflateSetDictionary z_deflateSetDictionary
-# define deflateCopy z_deflateCopy
-# define deflateReset z_deflateReset
-# define deflateParams z_deflateParams
-# define inflateInit2_ z_inflateInit2_
-# define inflateSetDictionary z_inflateSetDictionary
-# define inflateSync z_inflateSync
-# define inflateReset z_inflateReset
-# define compress z_compress
-# define uncompress z_uncompress
-# define adler32 z_adler32
-#if 0
-# define crc32 z_crc32
-# define get_crc_table z_get_crc_table
-#endif
-
-# define Byte z_Byte
-# define uInt z_uInt
-# define uLong z_uLong
-# define Bytef z_Bytef
-# define charf z_charf
-# define intf z_intf
-# define uIntf z_uIntf
-# define uLongf z_uLongf
-# define voidpf z_voidpf
-# define voidp z_voidp
-#endif
-
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-# define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(__i386__)
-# ifndef __32BIT__
-# define __32BIT__
-# endif
-#endif
-#if defined(__MSDOS__) && !defined(MSDOS)
-# define MSDOS
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#if defined(MSDOS) && !defined(__32BIT__)
-# define MAXSEG_64K
-#endif
-#ifdef MSDOS
-# define UNALIGNED_OK
-#endif
-
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC)
-# define STDC
-#endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
-# define STDC
-#endif
-
-#ifndef STDC
-# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-# define const
-# endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-# define NO_DUMMY_DECL
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-# ifdef MAXSEG_64K
-# define MAX_MEM_LEVEL 8
-# else
-# define MAX_MEM_LEVEL 9
-# endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-# define MAX_WBITS 15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
- 1 << (windowBits+2) + 1 << (memLevel+9)
- that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
- make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
- The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
- /* Type declarations */
-
-#ifndef OF /* function prototypes */
-# ifdef STDC
-# define OF(args) args
-# else
-# define OF(args) ()
-# endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
- /* MSC small or medium model */
-# define SMALL_MEDIUM
-# ifdef _MSC_VER
-# define FAR __far
-# else
-# define FAR far
-# endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-# ifndef __32BIT__
-# define SMALL_MEDIUM
-# define FAR __far
-# endif
-#endif
-#ifndef FAR
-# define FAR
-#endif
-
-typedef unsigned char Byte; /* 8 bits */
-typedef unsigned int uInt; /* 16 bits or more */
-typedef unsigned long uLong; /* 32 bits or more */
-
-#if defined(__BORLANDC__) && defined(SMALL_MEDIUM)
- /* Borland C/C++ ignores FAR inside typedef */
-# define Bytef Byte FAR
-#else
- typedef Byte FAR Bytef;
-#endif
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
- typedef void FAR *voidpf;
- typedef void *voidp;
-#else
- typedef Byte FAR *voidpf;
- typedef Byte *voidp;
-#endif
-
-
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
-# include <windows.h>
-# define EXPORT WINAPI
-#else
-# define EXPORT
-#endif
-
-#endif /* _ZCONF_H */
-/* --- zconf.h */
-
-#define ZLIB_VERSION "1.0.4P"
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms may be added later and will have the same
- stream interface.
-
- For compression the application must provide the output buffer and
- may optionally provide the input buffer for optimization. For decompression,
- the application must provide the input buffer and may optionally provide
- the output buffer for optimization.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
-
- The library does not install any signal handler. It is recommended to
- add at least a handler for SIGSEGV when decompressing; the library checks
- the consistency of the input data whenever possible but may go nuts
- for some forms of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void (*free_func) OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
- uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Bytef *next_out; /* next output byte should be put there */
- uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- const char *msg; /* last error message, NULL if no error */
- struct internal_state FAR *state; /* not visible by applications */
-
- alloc_func zalloc; /* used to allocate the internal state */
- free_func zfree; /* used to free the internal state */
- voidpf opaque; /* private data object passed to zalloc and zfree */
-
- int data_type; /* best guess about the data type: ascii or binary */
- uLong adler; /* adler32 value of the uncompressed data */
- uLong reserved; /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return Z_NULL if there is not enough memory for the object.
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1
-#define Z_PACKET_FLUSH 2
-#define Z_SYNC_FLUSH 3
-#define Z_FULL_FLUSH 4
-#define Z_FINISH 5
-/* Allowed flush values; see deflate() below for details */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_NEED_DICT 2
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION 0
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_DEFAULT_STRATEGY 0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY 0
-#define Z_ASCII 1
-#define Z_UNKNOWN 2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED 8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
- /* basic functions */
-
-extern const char * EXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by deflateInit and inflateInit.
- */
-
-/*
-extern int EXPORT deflateInit OF((z_streamp strm, int level));
-
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller.
- If zalloc and zfree are set to Z_NULL, deflateInit updates them to
- use default allocation functions.
-
- The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- Z_DEFAULT_COMPRESSION requests a default compromise between speed and
- compression (currently equivalent to level 6).
-
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if level is not a valid compression level,
- Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- msg is set to null if there is no error message. deflateInit does not
- perform any compression: this will be done by deflate().
-*/
-
-
-extern int EXPORT deflate OF((z_streamp strm, int flush));
-/*
- Performs one or both of the following actions:
-
- - Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in and avail_in are updated and
- processing will resume at this point for the next call of deflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating avail_in or avail_out accordingly; avail_out
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
- and with zero avail_out, it must be called again after making room in the
- output buffer because there might be more output pending.
-
- If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
- block is terminated and flushed to the output buffer so that the
- decompressor can get all input data available so far. For method 9, a future
- variant on method 8, the current block will be flushed but not terminated.
- Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
- output is byte aligned (the compressor can clear its internal bit buffer)
- and the current block is always terminated; this can be useful if the
- compressor has to be restarted from scratch after an interruption (in which
- case the internal state of the compressor may be lost).
- If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
- special marker is output and the compression dictionary is discarded; this
- is useful to allow the decompressor to synchronize if one compressed block
- has been damaged (see inflateSync below). Flushing degrades compression and
- so should be used only when necessary. Using Z_FULL_FLUSH too often can
- seriously degrade the compression. If deflate returns with avail_out == 0,
- this function must be called again with the same value of the flush
- parameter and more output space (updated avail_out), until the flush is
- complete (deflate returns with non-zero avail_out).
-
- If the parameter flush is set to Z_PACKET_FLUSH, the compression
- block is terminated, and a zero-length stored block is output,
- omitting the length bytes (the effect of this is that the 3-bit type
- code 000 for a stored block is output, and the output is then
- byte-aligned). This is designed for use at the end of a PPP packet.
-
- If the parameter flush is set to Z_FINISH, pending input is processed,
- pending output is flushed and deflate returns with Z_STREAM_END if there
- was enough output space; if deflate returns with Z_OK, this function must be
- called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the
- stream are deflateReset or deflateEnd.
-
- Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least
- 0.1% larger than avail_in plus 12 bytes. If deflate does not return
- Z_STREAM_END, then it must be called again as described above.
-
- deflate() may update data_type if it can make a good guess about
- the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
-
- deflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if all input has been
- consumed and all output has been produced (only when flush is set to
- Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int EXPORT deflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
- stream state was inconsistent, Z_DATA_ERROR if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- msg may be set but then points to a static string (which must not be
- deallocated).
-*/
-
-
-/*
-extern int EXPORT inflateInit OF((z_streamp strm));
-
- Initializes the internal stream state for decompression. The fields
- zalloc, zfree and opaque must be initialized before by the caller. If
- zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
- allocation functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
- with the version assumed by the caller. msg is set to null if there is no
- error message. inflateInit does not perform any decompression: this will be
- done by inflate().
-*/
-
-#if defined(__FreeBSD__) && defined(_KERNEL)
-#define inflate _zlib104_inflate /* FreeBSD already has an inflate :-( */
-#endif
-
-extern int EXPORT inflate OF((z_streamp strm, int flush));
-/*
- Performs one or both of the following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() provides as much output as possible, until there
- is no more input data or no more space in the output buffer (see below
- about the flush parameter).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate(). If inflate returns Z_OK and with zero avail_out, it
- must be called again after making room in the output buffer because there
- might be more output pending.
-
- If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
- inflate flushes as much output as possible to the output buffer. The
- flushing behavior of inflate is not specified for values of the flush
- parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
- current implementation actually flushes as much output as possible
- anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data
- has been consumed, it is expecting to see the length field of a stored
- block; if not, it returns Z_DATA_ERROR.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster routine
- may be used for the single inflate() call.
-
- inflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if the end of the
- compressed data has been reached and all uncompressed output has been
- produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
- inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
- Z_STREAM_ERROR if the stream structure was inconsistent (for example if
- next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
- Z_BUF_ERROR if no progress is possible or if there was not enough room in
- the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
- application may then call inflateSync to look for a good compression block.
- In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
- dictionary chosen by the compressor.
-*/
-
-
-extern int EXPORT inflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
- /* Advanced functions */
-
-/*
- The following functions are needed only in some special applications.
-*/
-
-/*
-extern int EXPORT deflateInit2 OF((z_streamp strm,
- int level,
- int method,
- int windowBits,
- int memLevel,
- int strategy));
-
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by
- the caller.
-
- The method parameter is the compression method. It must be Z_DEFLATED in
- this version of the library. (Method 9 will allow a 64K history buffer and
- partial block flushes.)
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library (the value 16 will be allowed for method 9). Larger
- values of this parameter result in better compression at the expense of
- memory usage. The default value is 15 if deflateInit is used instead.
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.
-
- The strategy parameter is used to tune the compression algorithm. Use the
- value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
- filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
- string match). Filtered data consists mostly of small values with a
- somewhat random distribution. In this case, the compression algorithm is
- tuned to compress them better. The effect of Z_FILTERED is to force more
- Huffman coding and less string matching; it is somewhat intermediate
- between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
- the compression ratio but not the correctness of the compressed output even
- if it is not set appropriately.
-
- If next_in is not null, the library will use this buffer to hold also
- some history information; the buffer must either hold the entire input
- data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
- is null, the library will allocate its own history buffer (and leave next_in
- null). next_out need not be provided here but must be provided by the
- application for the next call of deflate().
-
- If the history buffer is provided by the application, next_in must
- must never be changed by the application since the compressor maintains
- information inside this buffer from call to call; the application
- must provide more input only by increasing avail_in. next_in is always
- reset by the library in this case.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
- not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
- an invalid method). msg is set to null if there is no error message.
- deflateInit2 does not perform any compression: this will be done by
- deflate().
-*/
-
-extern int EXPORT deflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the compression dictionary (history buffer) from the given
- byte sequence without producing any compressed output. This function must
- be called immediately after deflateInit or deflateInit2, before any call
- of deflate. The compressor and decompressor must use exactly the same
- dictionary (see inflateSetDictionary).
- The dictionary should consist of strings (byte sequences) that are likely
- to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
- dictionary is most useful when the data to be compressed is short and
- can be predicted with good accuracy; the data can then be compressed better
- than with the default empty dictionary. In this version of the library,
- only the last 32K bytes of the dictionary are used.
- Upon return of this function, strm->adler is set to the Adler32 value
- of the dictionary; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The Adler32 value
- applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.)
-
- deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state
- is inconsistent (for example if deflate has already been called for this
- stream). deflateSetDictionary does not perform any compression: this will
- be done by deflate().
-*/
-
-extern int EXPORT deflateCopy OF((z_streamp dest,
- z_streamp source));
-/*
- Sets the destination stream as a complete copy of the source stream. If
- the source stream is using an application-supplied history buffer, a new
- buffer is allocated for the destination stream. The compressed output
- buffer is always application-supplied. It's the responsibility of the
- application to provide the correct values of next_out and avail_out for the
- next call of deflate.
-
- This function can be useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and
- can consume lots of memory.
-
- deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
- destination.
-*/
-
-extern int EXPORT deflateReset OF((z_streamp strm));
-/*
- This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state.
- The stream will keep the same compression level and any other attributes
- that may have been set by deflateInit2.
-
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
-/*
- Dynamically update the compression level and compression strategy.
- This can be used to switch between compression and straight copy of
- the input data, or to switch to a different kind of input data requiring
- a different strategy. If the compression level is changed, the input
- available so far is compressed with the old level (and may be flushed);
- the new level will take effect only at the next call of deflate().
-
- Before the call of deflateParams, the stream state must be set as for
- a call of deflate(), since the currently available input may have to
- be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
- deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
- stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
- if strm->avail_out was zero.
-*/
-
-extern int EXPORT deflateOutputPending OF((z_streamp strm));
-/*
- Returns the number of bytes of output which are immediately
- available from the compressor (i.e. without any further input
- or flush).
-*/
-
-/*
-extern int EXPORT inflateInit2 OF((z_streamp strm,
- int windowBits));
-
- This is another version of inflateInit with more compression options. The
- fields next_out, zalloc, zfree and opaque must be initialized before by
- the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library (the value 16 will be allowed soon). The
- default value is 15 if inflateInit is used instead. If a compressed stream
- with a larger window size is given as input, inflate() will return with
- the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
- If next_out is not null, the library will use this buffer for the history
- buffer; the buffer must either be large enough to hold the entire output
- data, or have at least 1<<windowBits bytes. If next_out is null, the
- library will allocate its own buffer (and leave next_out null). next_in
- need not be provided here but must be provided by the application for the
- next call of inflate().
-
- If the history buffer is provided by the application, next_out must
- never be changed by the application since the decompressor maintains
- history information inside this buffer from call to call; the application
- can only reset next_out to the beginning of the history buffer when
- avail_out is zero and all output has been consumed.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
- not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
- windowBits < 8). msg is set to null if there is no error message.
- inflateInit2 does not perform any decompression: this will be done by
- inflate().
-*/
-
-extern int EXPORT inflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the decompression dictionary (history buffer) from the given
- uncompressed byte sequence. This function must be called immediately after
- a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
- by the compressor can be determined from the Adler32 value returned by this
- call of inflate. The compressor and decompressor must use exactly the same
- dictionary (see deflateSetDictionary).
-
- inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
- inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect Adler32 value). inflateSetDictionary does not
- perform any decompression: this will be done by subsequent calls of
- inflate().
-*/
-
-extern int EXPORT inflateSync OF((z_streamp strm));
-/*
- Skips invalid compressed data until the special marker (see deflate()
- above) can be found, or until all available input is skipped. No output
- is provided.
-
- inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no marker has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
-*/
-
-extern int EXPORT inflateReset OF((z_streamp strm));
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
- This function adds the data at next_in (avail_in bytes) to the output
- history without performing any output. There must be no pending output,
- and the decompressor must be expecting to see the start of a block.
- Calling this function is equivalent to decompressing a stored block
- containing the data at next_in (except that the data is not output).
-*/
-
- /* utility functions */
-
-/*
- The following utility functions are implemented on top of the
- basic stream-oriented functions. To simplify the interface, some
- default options are assumed (compression level, window size,
- standard memory allocation functions). The source code of these
- utility functions can easily be modified if you need special options.
-*/
-
-extern int EXPORT compress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be at least 0.1% larger than
- sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
- compressed buffer.
- This function can be used to compress a whole file at once if the
- input file is mmap'ed.
- compress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer.
-*/
-
-extern int EXPORT uncompress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer.
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
-
- uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-
-
-typedef voidp gzFile;
-
-extern gzFile EXPORT gzopen OF((const char *path, const char *mode));
-/*
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb") but can also include a compression level
- ("wb9"). gzopen can be used to read a file which is not in gzip format;
- in this case gzread will directly read from the file without decompression.
- gzopen returns NULL if the file could not be opened or if there was
- insufficient memory to allocate the (de)compression state; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is Z_MEM_ERROR).
-*/
-
-extern gzFile EXPORT gzdopen OF((int fd, const char *mode));
-/*
- gzdopen() associates a gzFile with the file descriptor fd. File
- descriptors are obtained from calls like open, dup, creat, pipe or
- fileno (in the file has been previously opened with fopen).
- The mode parameter is as in gzopen.
- The next call of gzclose on the returned gzFile will also close the
- file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
- descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
- gzdopen returns NULL if there was insufficient memory to allocate
- the (de)compression state.
-*/
-
-extern int EXPORT gzread OF((gzFile file, voidp buf, unsigned len));
-/*
- Reads the given number of uncompressed bytes from the compressed file.
- If the input file was not in gzip format, gzread copies the given number
- of bytes into the buffer.
- gzread returns the number of uncompressed bytes actually read (0 for
- end of file, -1 for error). */
-
-extern int EXPORT gzwrite OF((gzFile file, const voidp buf, unsigned len));
-/*
- Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of uncompressed bytes actually written
- (0 in case of error).
-*/
-
-extern int EXPORT gzflush OF((gzFile file, int flush));
-/*
- Flushes all pending output into the compressed file. The parameter
- flush is as in the deflate() function. The return value is the zlib
- error number (see function gzerror below). gzflush returns Z_OK if
- the flush parameter is Z_FINISH and all output could be flushed.
- gzflush should be called only when strictly necessary because it can
- degrade compression.
-*/
-
-extern int EXPORT gzclose OF((gzFile file));
-/*
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression state. The return value is the zlib
- error number (see function gzerror below).
-*/
-
-extern const char * EXPORT gzerror OF((gzFile file, int *errnum));
-/*
- Returns the error message for the last error which occurred on the
- given compressed file. errnum is set to zlib error number. If an
- error occurred in the filesystem and not in the compression library,
- errnum is set to Z_ERRNO and the application may consult errno
- to get the exact error code.
-*/
-
- /* checksum functions */
-
-/*
- These functions are not related to compression but are exported
- anyway because they might be useful in applications using the
- compression library.
-*/
-
-extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
-/*
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
-
- uLong adler = adler32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- adler = adler32(adler, buffer, length);
- }
- if (adler != original_adler) error();
-*/
-
-#if 0
-extern uLong EXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
-/*
- Update a running crc with the bytes buf[0..len-1] and return the updated
- crc. If buf is NULL, this function returns the required initial value
- for the crc. Pre- and post-conditioning (one's complement) is performed
- within this function so it shouldn't be done by the application.
- Usage example:
-
- uLong crc = crc32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- crc = crc32(crc, buffer, length);
- }
- if (crc != original_crc) error();
-*/
-#endif
-
-
- /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-extern int EXPORT deflateInit_ OF((z_streamp strm, int level,
- const char *version, int stream_size));
-extern int EXPORT inflateInit_ OF((z_streamp strm,
- const char *version, int stream_size));
-extern int EXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
- int windowBits, int memLevel, int strategy,
- const char *version, int stream_size));
-extern int EXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
- const char *version, int stream_size));
-#define deflateInit(strm, level) \
- deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
- inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
- deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
- (strategy), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
- inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
- struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZLIB_H */
-/* --- zlib.h */
Index: sys/sys/zutil.h
===================================================================
--- sys/sys/zutil.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.16 1996/07/24 13:41:13 me Exp $ */
-/* $FreeBSD$ */
-
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
-
-#define ZEXPORT
-
-#ifdef _KERNEL
-#include <sys/zlib.h>
-#else
-#include "zlib.h"
-#endif
-
-#ifdef _KERNEL
-/* Assume this is a *BSD or SVR4 kernel */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/systm.h>
-#include <sys/module.h>
-#include <sys/errno.h>
-#include <sys/param.h>
-#include <sys/kernel.h>
-# define HAVE_MEMCPY
-
-#else
-#if defined(__KERNEL__)
-/* Assume this is a Linux kernel */
-#include <linux/string.h>
-#define HAVE_MEMCPY
-
-#else /* not kernel */
-
-#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS)
-# include <stddef.h>
-# include <errno.h>
-#else
- extern int errno;
-#endif
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#endif
-#endif /* __KERNEL__ */
-#endif /* _KERNEL */
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long ulg;
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
- return (strm->msg = (const char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
- /* common constants */
-
-#ifndef DEF_WBITS
-# define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES 2
-/* The three kinds of block type */
-
-#define MIN_MATCH 3
-#define MAX_MATCH 258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
- /* target dependencies */
-
-#ifdef MSDOS
-# define OS_CODE 0x00
-# ifdef __TURBOC__
-# include <alloc.h>
-# else /* MSC or DJGPP */
-# include <malloc.h>
-# endif
-#endif
-
-#ifdef OS2
-# define OS_CODE 0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-# define OS_CODE 0x0b
-#endif
-
-#if defined(VAXC) || defined(VMS)
-# define OS_CODE 0x02
-# define FOPEN(name, mode) \
- fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#ifdef AMIGA
-# define OS_CODE 0x01
-#endif
-
-#if defined(ATARI) || defined(atarist)
-# define OS_CODE 0x05
-#endif
-
-#ifdef MACOS
-# define OS_CODE 0x07
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-# define OS_CODE 0x0F
-#endif
-
-#ifdef TOPS20
-# define OS_CODE 0x0a
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-# define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
- /* Common defaults */
-
-#ifndef OS_CODE
-# define OS_CODE 0x03 /* assume Unix */
-#endif
-
-#ifndef FOPEN
-# define FOPEN(name, mode) fopen((name), (mode))
-#endif
-
- /* functions */
-
-#ifdef HAVE_STRERROR
- extern char *strerror OF((int));
-# define zstrerror(errnum) strerror(errnum)
-#else
-# define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
-# define NO_MEMCPY
-#endif
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER)
- /* Use our own functions for small and medium model with MSC <= 5.0.
- * You may have to use the same strategy for Borland C (untested).
- */
-# define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-# define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-# define zmemcpy _fmemcpy
-# define zmemcmp _fmemcmp
-# define zmemzero(dest, len) _fmemset(dest, 0, len)
-# else
-# define zmemcpy memcpy
-# define zmemcmp memcmp
-# define zmemzero(dest, len) memset(dest, 0, len)
-# endif
-#else
- extern void zmemcpy OF((Bytef* dest, Bytef* source, uInt len));
- extern int zmemcmp OF((Bytef* s1, Bytef* s2, uInt len));
- extern void zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-# include <stdio.h>
-# ifndef verbose
-# define verbose 0
-# endif
- extern void z_error OF((char *m));
-# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len));
-
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void zcfree OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
- (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* _Z_UTIL_H */
Index: sys/ufs/ffs/ffs_alloc.c
===================================================================
--- sys/ufs/ffs/ffs_alloc.c
+++ sys/ufs/ffs/ffs_alloc.c
@@ -68,6 +68,7 @@
#include <sys/param.h>
#include <sys/capsicum.h>
+#include <sys/crc32.h>
#include <sys/systm.h>
#include <sys/bio.h>
#include <sys/buf.h>
Index: sys/ufs/ffs/ffs_snapshot.c
===================================================================
--- sys/ufs/ffs/ffs_snapshot.c
+++ sys/ufs/ffs/ffs_snapshot.c
@@ -44,6 +44,7 @@
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/conf.h>
+#include <sys/crc32.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/fcntl.h>
Index: sys/ufs/ffs/ffs_subr.c
===================================================================
--- sys/ufs/ffs/ffs_subr.c
+++ sys/ufs/ffs/ffs_subr.c
@@ -59,6 +59,7 @@
#else /* _KERNEL */
#include <sys/systm.h>
+#include <sys/crc32.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mount.h>
Index: sys/ufs/ffs/ffs_vfsops.c
===================================================================
--- sys/ufs/ffs/ffs_vfsops.c
+++ sys/ufs/ffs/ffs_vfsops.c
@@ -40,6 +40,7 @@
#include "opt_ddb.h"
#include <sys/param.h>
+#include <sys/crc32.h>
#include <sys/systm.h>
#include <sys/namei.h>
#include <sys/priv.h>

File Metadata

Mime Type
text/plain
Expires
Wed, Aug 26, 3:40 PM (2 h, 52 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
37308337
Default Alt Text
D19706.id55639.diff (617 KB)

Event Timeline