Page MenuHomeFreeBSD
Files F163308555

D7551.id19429.diff
No OneTemporary
Actions

D7551.id19429.diff
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.
Index: share/man/man4/Makefile
===================================================================
--- share/man/man4/Makefile
+++ share/man/man4/Makefile
@@ -79,6 +79,7 @@
bhndb.4 \
bktr.4 \
blackhole.4 \
+ bnxt.4 \
bpf.4 \
bridge.4 \
bt.4 \
@@ -592,6 +593,7 @@
MLINKS+=bfe.4 if_bfe.4
MLINKS+=bge.4 if_bge.4
MLINKS+=bktr.4 brooktree.4
+MLINKS+=bnxt.4 if_bnxt.4
MLINKS+=bridge.4 if_bridge.4
MLINKS+=bwi.4 if_bwi.4
MLINKS+=bwn.4 if_bwn.4
Index: share/man/man4/bnxt.4
===================================================================
--- /dev/null
+++ share/man/man4/bnxt.4
@@ -0,0 +1,205 @@
+.\" Copyright (c) 2016 Broadcom, All Rights Reserved.
+.\" The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\"
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+.\" THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" $FreeBSD$
+.\"
+.Dd May 12, 2016
+.Dt BNXT 4
+.Os
+.Sh NAME
+.Nm bnxt
+.Nd "Broadcom NetXtreme-C/NetXtreme-E Family Ethernet driver"
+.Sh SYNOPSIS
+To compile this driver into the kernel,
+place the following lines in your
+kernel configuration file:
+.Bd -ragged -offset indent
+.Cd "device bnxt"
+.Ed
+.Pp
+Alternatively, to load the driver as a
+module at boot time, place the following line in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+if_bnxt_load="YES"
+.Ed
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for various NICs based on the Broadcom BCM57301/2/4,
+and BCM57402/4/6 Ethernet controller chips.
+.Pp
+For more information on configuring this device, see
+.Xr ifconfig 8 .
+.Sh HARDWARE
+The
+.Nm
+driver provides support for various NICs based on the Broadcom NetXtreme-C and
+NetXtreme-E families of Gigabit Ethernet controller chips, including the
+following:
+.Pp
+.Bl -bullet -compact
+.It
+Broadcom BCM57301 NetXtreme-C 10Gb Ethernet Controller
+.It
+Broadcom BCM57302 NetXtreme-C 10Gb/25Gb Ethernet Controller
+.It
+Broadcom BCM57304 NetXtreme-C 10Gb/25Gb/40Gb/50Gb Ethernet Controller
+.It
+Broadcom BCM57402 NetXtreme-E 10Gb Ethernet Controller
+.It
+Broadcom BCM57404 NetXtreme-E 10Gb/25Gb Ethernet Controller
+.It
+Broadcom BCM57406 NetXtreme-E 10GBase-T Ethernet Controller
+.It
+Broadcom BCM57402 NetXtreme-E Partition
+.It
+Broadcom BCM57407 NetXtreme-E 10GBase-T Ethernet Controller
+.It
+Broadcom BCM57404 NetXtreme-E Partition
+.It
+Broadcom BCM57406 NetXtreme-E Partition
+.It
+Broadcom BCM57407 NetXtreme-E 25Gb Ethernet Controller
+.It
+Broadcom BCM57304 NetXtreme-C Virtual Function
+.It
+Broadcom BCM57404 NetXtreme-E Virtual Function
+.El
+.Sh SYSCTL VARIABLES
+The following variables must be set before loading the driver, either via
+.Xr loader.conf 5 or throug the use of
+.Xr kenv 1 . These are provided by the
+.Xr iflib 9 framework, and may be better documented there.
+.Bl -tag -width indent
+.It Va dev.bnxt.X.iflib.override_nrxds
+This overrides the number of RX descriptors for each queue. This is a comma
+separated list of three positive integers, the size of the completion ring,
+the size of the receive ring, and the size of the aggregation ring respectively.
+The completion ring should be at least four times the size of the receive ring
+plus the size of the aggregation ring. These numbers must be powers of two, and
+zero indicates that the default should be used.
+Defaults to 0,0,0
+.It Va dev.bnxt.X.iflib.override_ntxds
+This overrides the number of TX descriptors for each queue. This is a comma
+separated list of two positive integers, the size of the completion ring, and
+the size of the transmit ring respectively. The completion ring should be at
+least twice the size of the transmit ring. These numbers must be powers of two,
+and zero indicates that the default value should be used.
+Defaults to 0,0
+.It Va override_qs_enable
+Setting this alles the number of transmit and receive queues to be different.
+If this is not set,
+.It Va override_nrxqs
+Sets the number of RX queues. If zero, the number of RX queues is derived from
+the number of cores on the socket the controller is connected to.
+Defaults to 0
+.It Va override_ntxqs
+Sets the number of TX queues. If zero, the number of TX queues is derived from
+the number of cores in the socket the controller is connected to.
+.El
+.Pp
+The following variables sysctl variables can be changed at any time:
+.Xr sysctl 8
+variables:
+.Bl -tag -width indent
+.It Va dev.bnxt.X.vlan_only
+This requires that incoming frames must have a VLAN tag on them that matches
+one that is configured for the NIC. Normally, both frames that have a matching
+VLAN tag and frames that have no VLAN tag are accepted.
+Defaults to 0
+.It Va dev.bnxt.X.vlan_strip
+Setting this to non-zero configures the NIC to strip VLAN tags on receive.
+Defaults to 0
+.It Va dev.bnxt.X.rx_stall
+This enables buffering rather than dropping frames when there are no available
+host RX buffers to DMA to.
+Defaults to 0
+.It Va dev.bnxt.X.rss_type
+A comma-separated list of RSS hash types to support. Default is all types.
+Defaults to ipv4,tcp_ipv4,udp_ipv4,ipv6,tcp_ipv6,udp_ipv6
+.It Va dev.bnxt.X.rss_key
+The current RSS key.
+Defaults to a randomly generated value
+.It Va dev.bnxt.X.ver.hwrm_min_ver
+The minimum HWRM (HardWare Resource Manager) firmware API to support. If the
+firmware implements an older version, a warning will be printed, and the
+firmware should be upgraded.
+Defaults to 1.2.2
+.El
+.Pp
+The following sysctl variables are read-only:
+.Bl -tag -width indent
+.It Va dev.bnxt.X.if_name
+The current interface name of the device. This will normally be "bnxtX", but
+this can be changed via ifconfig name. This sysctl allows correlating an
+interface with a child of dev.bnxt.
+.It Va dev.bnxt.X.nvram.*
+Various information about the NVRAM part which contains the device firmware.
+.It Va dev.bnxt.X.ver.*
+Various version related information about the device and firmware. Some of
+these follow.
+.It Va dev.bnxt.X.ver.hwrm_if
+The supported HWRM API version of the currently running firmware.
+.It Va dev.bnxt.X.driver_hwrm_if
+The HWRM API version the driver was built to support.
+.It Va dev.bnxt.X.hwstats.*
+Various per-queue statistics tracked by the hardware.
+.It Va dev.bnxt.X.hwstats.rxq0.drop_pkts
+The number of packets dropped by hardware on queue zero. This number may seem
+high, but this count includes packets dropped due to incorrect destination MAC,
+unsubscribed multicast address, and other normal resons to ignore ethernet
+frames.
+.El
+.Sh DIAGNOSTICS
+.Bl -diag
+.It "bnxt%d: %s command returned %s error."
+Device firmware rejected a command from the driver. There may be a
+driver/firmware HWRM API mismatch.
+.It "bnxt%d: Timeout sending %s (timeout: %d) seq %d\n"
+Device firmware unresponsive. Device likely needs to be reset.
+.It "bnxt%d: Timeout sending %s (timeout: %d) msg {0x%x 0x%x} len:%d v: %d\n"
+Partial firmware response. Device may need to be reset.
+.El
+.Sh SEE ALSO
+.Xr altq 4 ,
+.Xr arp 4 ,
+.Xr netintro 4 ,
+.Xr ng_ether 4 ,
+.Xr vlan 4 ,
+.Xr ifconfig 8 ,
+.Xr iflib 4
+.Sh HISTORY
+The
+.Nm
+device driver first appeared in
+.Fx 11.0 .
+.Sh AUTHORS
+The
+.Nm
+driver was written by
+.An Jack Vogel Aq Mt jfvogel@gmail.com .
+and is currently maintained by
+.An Stephen Hurd Aq Mt stephen.hurd@broadcom.com .
Index: sys/boot/forth/loader.conf
===================================================================
--- sys/boot/forth/loader.conf
+++ sys/boot/forth/loader.conf
@@ -312,6 +312,7 @@
if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet
if_bfe_load="NO" # Broadcom BCM4401
if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet
+if_bnxt_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet
if_bridge_load="NO" # if_bridge(4) devices
if_bwi_load="NO" # Broadcom BCM53xx IEEE 802.11b/g wireness NICs
if_bwn_load="NO" # Broadcom BCM43xx IEEE 802.11 wireless NICs
Index: sys/conf/NOTES
===================================================================
--- sys/conf/NOTES
+++ sys/conf/NOTES
@@ -1917,6 +1917,7 @@
device atphy # Attansic/Atheros F1
device axphy # Asix Semiconductor AX88x9x
device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C
+device bnxt # Broadcom NetXtreme-C/NetXtreme-E
device brgphy # Broadcom BCM54xx/57xx 1000baseTX
device ciphy # Cicada/Vitesse CS/VSC8xxx
device e1000phy # Marvell 88E1000 1000/100/10-BT
@@ -1957,6 +1958,7 @@
# BCM570x family of controllers, including the 3Com 3c996-T,
# the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and
# the embedded gigE NICs on Dell PowerEdge 2550 servers.
+# bnxt: Broadcom NetXtreme-C and NetXtreme-E PCIe 10/25/50G Ethernet adapters.
# bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet
# adapters.
# bwi: Broadcom BCM430* and BCM431* family of wireless adapters.
Index: sys/conf/files
===================================================================
--- sys/conf/files
+++ sys/conf/files
@@ -1183,6 +1183,10 @@
dev/bktr/bktr_os.c optional bktr pci
dev/bktr/bktr_tuner.c optional bktr pci
dev/bktr/msp34xx.c optional bktr pci
+dev/bnxt/if_bnxt.c optional bnxt iflib pci
+dev/bnxt/bnxt_hwrm.c optional bnxt iflib pci
+dev/bnxt/bnxt_sysctl.c optional bnxt iflib pci
+dev/bnxt/bnxt_txrx.c optional bnxt iflib pci
dev/buslogic/bt.c optional bt
dev/buslogic/bt_eisa.c optional bt eisa
dev/buslogic/bt_isa.c optional bt isa
Index: sys/dev/bnxt/bnxt.h
===================================================================
--- /dev/null
+++ sys/dev/bnxt/bnxt.h
@@ -0,0 +1,569 @@
+/*-
+ * Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2016 Broadcom, All Rights Reserved.
+ * The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#ifndef _BNXT_H
+#define _BNXT_H
+
+#include <sys/types.h>
+#include <sys/bus.h>
+#include <sys/bus_dma.h>
+#include <sys/socket.h>
+#include <sys/sysctl.h>
+#include <sys/taskqueue.h>
+
+#include <net/ethernet.h>
+#include <net/if.h>
+#include <net/if_var.h>
+#include <net/iflib.h>
+
+#include "hsi_struct_def.h"
+
+/* PCI IDs */
+#define BROADCOM_VENDOR_ID 0x14E4
+
+#define BCM57301 0x16c8
+#define BCM57302 0x16c9
+#define BCM57304 0x16ca
+#define BCM57402 0x16d0
+#define BCM57404 0x16d1
+#define BCM57406 0x16d2
+#define BCM57402_NPAR 0x16d4
+#define BCM57407 0x16d5
+#define BCM57404_NPAR 0x16e7
+#define BCM57406_NPAR 0x16e8
+#define BCM57407_SFP 0x16e9
+#define BCM57304_VF 0x16cb
+#define BCM57404_VF 0x16d3
+
+#define CSUM_OFFLOAD (CSUM_IP_TSO|CSUM_IP6_TSO|CSUM_IP| \
+ CSUM_IP_UDP|CSUM_IP_TCP|CSUM_IP_SCTP| \
+ CSUM_IP6_UDP|CSUM_IP6_TCP|CSUM_IP6_SCTP)
+
+#define BNXT_MAX_MTU 9000
+
+/* Completion related defines */
+#define CMP_VALID(cmp, v_bit) \
+ ((!!(((struct cmpl_base *)(cmp))->info3_v & htole32(CMPL_BASE_V))) == !!(v_bit) )
+
+#define NEXT_CP_CONS_V(ring, cons, v_bit) do { \
+ if (__predict_false(++(cons) == (ring)->ring_size)) \
+ ((cons) = 0, (v_bit) = !v_bit); \
+} while (0)
+
+#define RING_NEXT(ring, idx) (__predict_false(idx + 1 == (ring)->ring_size) ? \
+ 0 : idx + 1)
+
+#define CMPL_PREFETCH_NEXT(cpr, idx) \
+ __builtin_prefetch(&((struct cmpl_base *)(cpr)->ring.vaddr)[((idx) +\
+ (CACHE_LINE_SIZE / sizeof(struct cmpl_base))) & \
+ ((cpr)->ring.ring_size - 1)])
+
+/*
+ * If we update the index, a write barrier is needed after the write to ensure
+ * the completion ring has space before the RX/TX ring does. Since we can't
+ * make the RX and AG doorbells covered by the same barrier without remapping
+ * MSI-X vectors, we create the barrier over the enture doorbell bar.
+ * TODO: Remap the MSI-X vectors to allow a barrier to only cover the doorbells
+ * for a single ring group.
+ *
+ * A barrier of just the size of the write is used to ensure the ordering
+ * remains correct and no writes are lost.
+ */
+#define BNXT_CP_DISABLE_DB(ring) do { \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, 4, \
+ BUS_SPACE_BARRIER_WRITE); \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, 0, \
+ (ring)->softc->doorbell_bar.size, BUS_SPACE_BARRIER_WRITE); \
+ bus_space_write_4((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, \
+ htole32(CMPL_DOORBELL_KEY_CMPL | CMPL_DOORBELL_MASK)); \
+} while (0)
+
+#define BNXT_CP_ENABLE_DB(ring) do { \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, 4, \
+ BUS_SPACE_BARRIER_WRITE); \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, 0, \
+ (ring)->softc->doorbell_bar.size, BUS_SPACE_BARRIER_WRITE); \
+ bus_space_write_4((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, \
+ htole32(CMPL_DOORBELL_KEY_CMPL)); \
+} while (0)
+
+#define BNXT_CP_IDX_ENABLE_DB(ring, cons) do { \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, 4, \
+ BUS_SPACE_BARRIER_WRITE); \
+ bus_space_write_4((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, \
+ htole32(CMPL_DOORBELL_KEY_CMPL | CMPL_DOORBELL_IDX_VALID | \
+ (cons))); \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, 0, \
+ (ring)->softc->doorbell_bar.size, BUS_SPACE_BARRIER_WRITE); \
+} while (0)
+
+#define BNXT_CP_IDX_DISABLE_DB(ring, cons) do { \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, 4, \
+ BUS_SPACE_BARRIER_WRITE); \
+ bus_space_write_4((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, \
+ htole32(CMPL_DOORBELL_KEY_CMPL | CMPL_DOORBELL_IDX_VALID | \
+ CMPL_DOORBELL_MASK | (cons))); \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, 0, \
+ (ring)->softc->doorbell_bar.size, BUS_SPACE_BARRIER_WRITE); \
+} while (0)
+
+#define BNXT_TX_DB(ring, idx) do { \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, 4, \
+ BUS_SPACE_BARRIER_WRITE); \
+ bus_space_write_4( \
+ (ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, \
+ (ring)->doorbell, htole32(TX_DOORBELL_KEY_TX | (idx))); \
+} while (0)
+
+#define BNXT_RX_DB(ring, idx) do { \
+ bus_space_barrier((ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, (ring)->doorbell, 4, \
+ BUS_SPACE_BARRIER_WRITE); \
+ bus_space_write_4( \
+ (ring)->softc->doorbell_bar.tag, \
+ (ring)->softc->doorbell_bar.handle, \
+ (ring)->doorbell, htole32(RX_DOORBELL_KEY_RX | (idx))); \
+} while (0)
+
+/* Lock macros */
+#define BNXT_HWRM_LOCK_INIT(_softc, _name) \
+ mtx_init(&(_softc)->hwrm_lock, _name, "BNXT HWRM Lock", MTX_DEF)
+#define BNXT_HWRM_LOCK(_softc) mtx_lock(&(_softc)->hwrm_lock)
+#define BNXT_HWRM_UNLOCK(_softc) mtx_unlock(&(_softc)->hwrm_lock)
+#define BNXT_HWRM_LOCK_DESTROY(_softc) mtx_destroy(&(_softc)->hwrm_lock)
+#define BNXT_HWRM_LOCK_ASSERT(_softc) mtx_assert(&(_softc)->hwrm_lock, \
+ MA_OWNED)
+
+/* Chip info */
+#define BNXT_TSO_SIZE UINT16_MAX
+
+/* NVRAM access */
+enum bnxt_nvm_directory_type {
+ BNX_DIR_TYPE_UNUSED = 0,
+ BNX_DIR_TYPE_PKG_LOG = 1,
+ BNX_DIR_TYPE_UPDATE = 2,
+ BNX_DIR_TYPE_CHIMP_PATCH = 3,
+ BNX_DIR_TYPE_BOOTCODE = 4,
+ BNX_DIR_TYPE_VPD = 5,
+ BNX_DIR_TYPE_EXP_ROM_MBA = 6,
+ BNX_DIR_TYPE_AVS = 7,
+ BNX_DIR_TYPE_PCIE = 8,
+ BNX_DIR_TYPE_PORT_MACRO = 9,
+ BNX_DIR_TYPE_APE_FW = 10,
+ BNX_DIR_TYPE_APE_PATCH = 11,
+ BNX_DIR_TYPE_KONG_FW = 12,
+ BNX_DIR_TYPE_KONG_PATCH = 13,
+ BNX_DIR_TYPE_BONO_FW = 14,
+ BNX_DIR_TYPE_BONO_PATCH = 15,
+ BNX_DIR_TYPE_TANG_FW = 16,
+ BNX_DIR_TYPE_TANG_PATCH = 17,
+ BNX_DIR_TYPE_BOOTCODE_2 = 18,
+ BNX_DIR_TYPE_CCM = 19,
+ BNX_DIR_TYPE_PCI_CFG = 20,
+ BNX_DIR_TYPE_TSCF_UCODE = 21,
+ BNX_DIR_TYPE_ISCSI_BOOT = 22,
+ BNX_DIR_TYPE_ISCSI_BOOT_IPV6 = 24,
+ BNX_DIR_TYPE_ISCSI_BOOT_IPV4N6 = 25,
+ BNX_DIR_TYPE_ISCSI_BOOT_CFG6 = 26,
+ BNX_DIR_TYPE_EXT_PHY = 27,
+ BNX_DIR_TYPE_SHARED_CFG = 40,
+ BNX_DIR_TYPE_PORT_CFG = 41,
+ BNX_DIR_TYPE_FUNC_CFG = 42,
+ BNX_DIR_TYPE_MGMT_CFG = 48,
+ BNX_DIR_TYPE_MGMT_DATA = 49,
+ BNX_DIR_TYPE_MGMT_WEB_DATA = 50,
+ BNX_DIR_TYPE_MGMT_WEB_META = 51,
+ BNX_DIR_TYPE_MGMT_EVENT_LOG = 52,
+ BNX_DIR_TYPE_MGMT_AUDIT_LOG = 53
+};
+
+enum bnxnvm_pkglog_field_index {
+ BNX_PKG_LOG_FIELD_IDX_INSTALLED_TIMESTAMP = 0,
+ BNX_PKG_LOG_FIELD_IDX_PKG_DESCRIPTION = 1,
+ BNX_PKG_LOG_FIELD_IDX_PKG_VERSION = 2,
+ BNX_PKG_LOG_FIELD_IDX_PKG_TIMESTAMP = 3,
+ BNX_PKG_LOG_FIELD_IDX_PKG_CHECKSUM = 4,
+ BNX_PKG_LOG_FIELD_IDX_INSTALLED_ITEMS = 5,
+ BNX_PKG_LOG_FIELD_IDX_INSTALLED_MASK = 6
+};
+
+#define BNX_DIR_ORDINAL_FIRST 0
+#define BNX_DIR_EXT_NONE 0
+
+struct bnxt_bar_info {
+ struct resource *res;
+ bus_space_tag_t tag;
+ bus_space_handle_t handle;
+ bus_size_t size;
+ int rid;
+};
+
+struct bnxt_link_info {
+ uint8_t media_type;
+ uint8_t transceiver;
+ uint8_t phy_addr;
+ uint8_t phy_link_status;
+ uint8_t wire_speed;
+ uint8_t loop_back;
+ uint8_t link_up;
+ uint8_t last_link_up;
+ uint8_t duplex;
+ uint8_t last_duplex;
+ uint8_t pause;
+ uint8_t last_pause;
+ uint8_t auto_pause;
+ uint8_t force_pause;
+ uint8_t duplex_setting;
+ uint8_t auto_mode;
+#define PHY_VER_LEN 3
+ uint8_t phy_ver[PHY_VER_LEN];
+ uint8_t phy_type;
+ uint16_t link_speed;
+ uint16_t support_speeds;
+ uint16_t auto_link_speeds;
+ uint16_t auto_link_speed;
+ uint16_t force_link_speed;
+ uint32_t preemphasis;
+
+ /* copy of requested setting */
+ uint8_t autoneg;
+#define BNXT_AUTONEG_SPEED 1
+#define BNXT_AUTONEG_FLOW_CTRL 2
+ uint8_t req_duplex;
+ uint8_t req_flow_ctrl;
+ uint16_t req_link_speed;
+};
+
+enum bnxt_cp_type {
+ BNXT_DEFAULT,
+ BNXT_TX,
+ BNXT_RX,
+ BNXT_SHARED
+};
+
+struct bnxt_cos_queue {
+ uint8_t id;
+ uint8_t profile;
+};
+
+struct bnxt_func_info {
+ uint32_t fw_fid;
+ uint8_t mac_addr[ETHER_ADDR_LEN];
+ uint16_t max_rsscos_ctxs;
+ uint16_t max_cp_rings;
+ uint16_t max_tx_rings;
+ uint16_t max_rx_rings;
+ uint16_t max_hw_ring_grps;
+ uint16_t max_irqs;
+ uint16_t max_l2_ctxs;
+ uint16_t max_vnics;
+ uint16_t max_stat_ctxs;
+};
+
+struct bnxt_pf_info {
+#define BNXT_FIRST_PF_FID 1
+#define BNXT_FIRST_VF_FID 128
+ uint8_t port_id;
+ uint32_t first_vf_id;
+ uint16_t active_vfs;
+ uint16_t max_vfs;
+ uint32_t max_encap_records;
+ uint32_t max_decap_records;
+ uint32_t max_tx_em_flows;
+ uint32_t max_tx_wm_flows;
+ uint32_t max_rx_em_flows;
+ uint32_t max_rx_wm_flows;
+ unsigned long *vf_event_bmap;
+ uint16_t hwrm_cmd_req_pages;
+ void *hwrm_cmd_req_addr[4];
+ bus_addr_t hwrm_cmd_req_dma_addr[4];
+};
+
+struct bnxt_vf_info {
+ uint16_t fw_fid;
+ uint8_t mac_addr[ETHER_ADDR_LEN];
+ uint16_t max_rsscos_ctxs;
+ uint16_t max_cp_rings;
+ uint16_t max_tx_rings;
+ uint16_t max_rx_rings;
+ uint16_t max_hw_ring_grps;
+ uint16_t max_l2_ctxs;
+ uint16_t max_irqs;
+ uint16_t max_vnics;
+ uint16_t max_stat_ctxs;
+ uint32_t vlan;
+#define BNXT_VF_QOS 0x1
+#define BNXT_VF_SPOOFCHK 0x2
+#define BNXT_VF_LINK_FORCED 0x4
+#define BNXT_VF_LINK_UP 0x8
+ uint32_t flags;
+ uint32_t func_flags; /* func cfg flags */
+ uint32_t min_tx_rate;
+ uint32_t max_tx_rate;
+ void *hwrm_cmd_req_addr;
+ bus_addr_t hwrm_cmd_req_dma_addr;
+};
+
+#define BNXT_FLAG_VF (1<<1)
+
+#define BNXT_PF(softc) (!((softc)->flags & BNXT_FLAG_VF))
+#define BNXT_VF(softc) ((softc)->flags & BNXT_FLAG_VF)
+
+struct bnxt_vlan_tag {
+ SLIST_ENTRY(bnxt_vlan_tag) next;
+ uint16_t tpid;
+ uint16_t tag;
+};
+
+struct bnxt_vnic_info {
+ uint16_t id;
+ uint16_t def_ring_grp;
+ uint16_t cos_rule;
+ uint16_t lb_rule;
+ uint16_t mru;
+
+ uint32_t rx_mask;
+ bool vlan_only;
+ struct iflib_dma_info mc_list;
+ int mc_list_count;
+#define BNXT_MAX_MC_ADDRS 16
+
+ uint32_t flags;
+#define BNXT_VNIC_FLAG_DEFAULT 0x01
+#define BNXT_VNIC_FLAG_BD_STALL 0x02
+#define BNXT_VNIC_FLAG_VLAN_STRIP 0x04
+
+ uint64_t filter_id;
+ uint32_t flow_id;
+
+ uint16_t rss_id;
+ uint32_t rss_hash_type;
+ uint8_t rss_hash_key[HW_HASH_KEY_SIZE];
+ struct iflib_dma_info rss_hash_key_tbl;
+ struct iflib_dma_info rss_grp_tbl;
+ SLIST_HEAD(vlan_head, bnxt_vlan_tag) vlan_tags;
+ struct iflib_dma_info vlan_tag_list;
+};
+
+struct bnxt_grp_info {
+ uint16_t stats_ctx;
+ uint16_t grp_id;
+ uint16_t rx_ring_id;
+ uint16_t cp_ring_id;
+ uint16_t ag_ring_id;
+};
+
+struct bnxt_ring {
+ uint64_t paddr;
+ vm_offset_t doorbell;
+ caddr_t vaddr;
+ struct bnxt_softc *softc;
+ uint32_t ring_size; // Must be a power of two
+ uint16_t id; // Logical ID
+ uint16_t phys_id;
+};
+
+struct bnxt_cp_ring {
+ struct bnxt_ring ring;
+ struct if_irq irq;
+ uint32_t cons;
+ bool v_bit; // Value of valid bit
+ struct ctx_hw_stats *stats;
+ uint32_t stats_ctx_id;
+ uint32_t last_idx; /* Used by RX rings only
+ * set to the last read pidx
+ */
+};
+
+struct bnxt_full_tpa_start {
+ struct rx_tpa_start_cmpl low;
+ struct rx_tpa_start_cmpl_hi high;
+};
+
+/* All the version information for the part */
+#define BNXT_VERSTR_SIZE (3*3+2+1) /* ie: "255.255.255\0" */
+#define BNXT_NAME_SIZE 17
+struct bnxt_ver_info {
+ uint8_t hwrm_if_major;
+ uint8_t hwrm_if_minor;
+ uint8_t hwrm_if_update;
+ char hwrm_if_ver[BNXT_VERSTR_SIZE];
+ char driver_hwrm_if_ver[BNXT_VERSTR_SIZE];
+ char hwrm_fw_ver[BNXT_VERSTR_SIZE];
+ char mgmt_fw_ver[BNXT_VERSTR_SIZE];
+ char netctrl_fw_ver[BNXT_VERSTR_SIZE];
+ char roce_fw_ver[BNXT_VERSTR_SIZE];
+ char phy_ver[BNXT_VERSTR_SIZE];
+ char pkg_ver[64];
+
+ char hwrm_fw_name[BNXT_NAME_SIZE];
+ char mgmt_fw_name[BNXT_NAME_SIZE];
+ char netctrl_fw_name[BNXT_NAME_SIZE];
+ char roce_fw_name[BNXT_NAME_SIZE];
+ char phy_vendor[BNXT_NAME_SIZE];
+ char phy_partnumber[BNXT_NAME_SIZE];
+
+ uint16_t chip_num;
+ uint8_t chip_rev;
+ uint8_t chip_metal;
+ uint8_t chip_bond_id;
+ uint8_t chip_type;
+
+ uint8_t hwrm_min_major;
+ uint8_t hwrm_min_minor;
+ uint8_t hwrm_min_update;
+
+ struct sysctl_ctx_list ver_ctx;
+ struct sysctl_oid *ver_oid;
+};
+
+struct bnxt_nvram_info {
+ uint16_t mfg_id;
+ uint16_t device_id;
+ uint32_t sector_size;
+ uint32_t size;
+ uint32_t reserved_size;
+ uint32_t available_size;
+
+ struct sysctl_ctx_list nvm_ctx;
+ struct sysctl_oid *nvm_oid;
+};
+
+struct bnxt_softc {
+ device_t dev;
+ if_ctx_t ctx;
+ if_softc_ctx_t scctx;
+ if_shared_ctx_t sctx;
+ struct ifmedia *media;
+
+ struct bnxt_bar_info hwrm_bar;
+ struct bnxt_bar_info doorbell_bar;
+ struct bnxt_link_info link_info;
+#define BNXT_FLAG_NPAR 1
+ uint32_t flags;
+ uint32_t total_msix;
+
+ struct bnxt_func_info func;
+ struct bnxt_pf_info pf;
+ struct bnxt_vf_info vf;
+
+ uint16_t hwrm_cmd_seq;
+ uint32_t hwrm_cmd_timeo; /* milliseconds */
+ struct iflib_dma_info hwrm_cmd_resp;
+ /* Interrupt info for HWRM */
+ struct if_irq irq;
+ struct mtx hwrm_lock;
+ uint16_t hwrm_max_req_len;
+
+#define BNXT_MAX_QUEUE 8
+ uint8_t max_tc;
+ struct bnxt_cos_queue q_info[BNXT_MAX_QUEUE];
+
+ struct iflib_dma_info hw_rx_port_stats;
+ struct iflib_dma_info hw_tx_port_stats;
+ struct rx_port_stats *rx_port_stats;
+ struct tx_port_stats *tx_port_stats;
+
+ int num_cp_rings;
+
+ struct bnxt_ring *tx_rings;
+ struct bnxt_cp_ring *tx_cp_rings;
+ struct iflib_dma_info tx_stats;
+ int ntxqsets;
+
+ struct bnxt_vnic_info vnic_info;
+ struct bnxt_ring *ag_rings;
+ struct bnxt_ring *rx_rings;
+ struct bnxt_cp_ring *rx_cp_rings;
+ struct bnxt_grp_info *grp_info;
+ struct iflib_dma_info rx_stats;
+ int nrxqsets;
+
+ struct bnxt_cp_ring def_cp_ring;
+ struct iflib_dma_info def_cp_ring_mem;
+ struct grouptask def_cp_task;
+
+ struct sysctl_ctx_list hw_stats;
+ struct sysctl_oid *hw_stats_oid;
+
+ struct bnxt_full_tpa_start *tpa_start;
+ struct bnxt_ver_info *ver_info;
+ struct bnxt_nvram_info *nvm_info;
+};
+
+struct bnxt_filter_info {
+ STAILQ_ENTRY(bnxt_filter_info) next;
+ uint64_t fw_l2_filter_id;
+#define INVALID_MAC_INDEX ((uint16_t)-1)
+ uint16_t mac_index;
+
+ /* Filter Characteristics */
+ uint32_t flags;
+ uint32_t enables;
+ uint8_t l2_addr[ETHER_ADDR_LEN];
+ uint8_t l2_addr_mask[ETHER_ADDR_LEN];
+ uint16_t l2_ovlan;
+ uint16_t l2_ovlan_mask;
+ uint16_t l2_ivlan;
+ uint16_t l2_ivlan_mask;
+ uint8_t t_l2_addr[ETHER_ADDR_LEN];
+ uint8_t t_l2_addr_mask[ETHER_ADDR_LEN];
+ uint16_t t_l2_ovlan;
+ uint16_t t_l2_ovlan_mask;
+ uint16_t t_l2_ivlan;
+ uint16_t t_l2_ivlan_mask;
+ uint8_t tunnel_type;
+ uint16_t mirror_vnic_id;
+ uint32_t vni;
+ uint8_t pri_hint;
+ uint64_t l2_filter_id_hint;
+};
+
+/* Function declarations */
+void bnxt_report_link(struct bnxt_softc *softc);
+bool bnxt_check_hwrm_version(struct bnxt_softc *softc);
+
+#endif /* _BNXT_H */
Index: sys/dev/bnxt/bnxt_hwrm.h
===================================================================
--- /dev/null
+++ sys/dev/bnxt/bnxt_hwrm.h
@@ -0,0 +1,103 @@
+/*-
+ * Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2016 Broadcom, All Rights Reserved.
+ * The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#ifndef _BNXT_HWRM_H
+#define _BNXT_HWRM_H
+
+/* HWRM Function Prototypes */
+int bnxt_alloc_hwrm_dma_mem(struct bnxt_softc *softc);
+void bnxt_free_hwrm_dma_mem(struct bnxt_softc *softc);
+int bnxt_hwrm_ring_alloc(struct bnxt_softc *softc, uint8_t type,
+ struct bnxt_ring *ring, uint16_t cmpl_ring_id, uint32_t stat_ctx_id,
+ bool irq);
+int bnxt_hwrm_ver_get(struct bnxt_softc *softc);
+int bnxt_hwrm_queue_qportcfg(struct bnxt_softc *softc);
+int bnxt_hwrm_func_drv_rgtr(struct bnxt_softc *softc);
+int bnxt_hwrm_func_drv_unrgtr(struct bnxt_softc *softc, bool shutdown);
+int bnxt_hwrm_func_qcaps(struct bnxt_softc *softc);
+int bnxt_hwrm_func_reset(struct bnxt_softc *softc);
+int bnxt_hwrm_set_link_setting(struct bnxt_softc *, bool set_pause,
+ bool set_eee);
+int bnxt_hwrm_set_pause(struct bnxt_softc *softc);
+int bnxt_hwrm_vnic_ctx_alloc(struct bnxt_softc *softc, uint16_t *ctx_id);
+int bnxt_hwrm_vnic_cfg(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic);
+int bnxt_hwrm_stat_ctx_alloc(struct bnxt_softc *softc, struct bnxt_cp_ring *cpr,
+ uint64_t paddr);
+int bnxt_hwrm_ring_grp_alloc(struct bnxt_softc *softc,
+ struct bnxt_grp_info *grp);
+int bnxt_hwrm_vnic_alloc(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic);
+int bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt_softc *softc,
+ struct bnxt_vnic_info *vnic);
+int bnxt_hwrm_set_filter(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic);
+int bnxt_hwrm_rss_cfg(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic,
+ uint32_t hash_type);
+int bnxt_hwrm_func_cfg(struct bnxt_softc *softc);
+int bnxt_hwrm_vnic_tpa_cfg(struct bnxt_softc *softc,
+ struct bnxt_vnic_info *vnic, uint32_t flags);
+int bnxt_hwrm_nvm_find_dir_entry(struct bnxt_softc *softc, uint16_t type,
+ uint16_t *ordinal, uint16_t ext, uint16_t *index, bool use_index,
+ uint8_t search_opt, uint32_t *data_length, uint32_t *item_length,
+ uint32_t *fw_ver);
+int bnxt_hwrm_nvm_read(struct bnxt_softc *softc, uint16_t index,
+ uint32_t offset, uint32_t length, struct iflib_dma_info *data);
+int bnxt_hwrm_nvm_modify(struct bnxt_softc *softc, uint16_t index,
+ uint32_t offset, void *data, bool cpyin, uint32_t length);
+int bnxt_hwrm_fw_reset(struct bnxt_softc *softc, uint8_t processor,
+ uint8_t *selfreset);
+int bnxt_hwrm_fw_qstatus(struct bnxt_softc *softc, uint8_t type,
+ uint8_t *selfreset);
+int bnxt_hwrm_nvm_write(struct bnxt_softc *softc, void *data, bool cpyin,
+ uint16_t type, uint16_t ordinal, uint16_t ext, uint16_t attr,
+ uint16_t option, uint32_t data_length, bool keep, uint32_t *item_length,
+ uint16_t *index);
+int bnxt_hwrm_nvm_erase_dir_entry(struct bnxt_softc *softc, uint16_t index);
+int bnxt_hwrm_nvm_get_dir_info(struct bnxt_softc *softc, uint32_t *entries,
+ uint32_t *entry_length);
+int bnxt_hwrm_nvm_get_dir_entries(struct bnxt_softc *softc,
+ uint32_t *entries, uint32_t *entry_length, struct iflib_dma_info *dma_data);
+int bnxt_hwrm_nvm_get_dev_info(struct bnxt_softc *softc, uint16_t *mfg_id,
+ uint16_t *device_id, uint32_t *sector_size, uint32_t *nvram_size,
+ uint32_t *reserved_size, uint32_t *available_size);
+int bnxt_hwrm_nvm_install_update(struct bnxt_softc *softc,
+ uint32_t install_type, uint64_t *installed_items, uint8_t *result,
+ uint8_t *problem_item, uint8_t *reset_required);
+int bnxt_hwrm_nvm_verify_update(struct bnxt_softc *softc, uint16_t type,
+ uint16_t ordinal, uint16_t ext);
+int bnxt_hwrm_fw_get_time(struct bnxt_softc *softc, uint16_t *year,
+ uint8_t *month, uint8_t *day, uint8_t *hour, uint8_t *minute,
+ uint8_t *second, uint16_t *millisecond, uint16_t *zone);
+int bnxt_hwrm_fw_set_time(struct bnxt_softc *softc, uint16_t year,
+ uint8_t month, uint8_t day, uint8_t hour, uint8_t minute, uint8_t second,
+ uint16_t millisecond, uint16_t zone);
+int bnxt_hwrm_port_phy_qcfg(struct bnxt_softc *softc);
+
+#endif
Index: sys/dev/bnxt/bnxt_hwrm.c
===================================================================
--- /dev/null
+++ sys/dev/bnxt/bnxt_hwrm.c
@@ -0,0 +1,1489 @@
+/*-
+ * Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2016 Broadcom, All Rights Reserved.
+ * The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/endian.h>
+
+#include "bnxt.h"
+#include "bnxt_hwrm.h"
+#include "hsi_struct_def.h"
+//#include "decode_hsi.h"
+
+static int bnxt_hwrm_err_map(uint16_t err);
+static inline int _is_valid_ether_addr(uint8_t *);
+static inline void get_random_ether_addr(uint8_t *);
+static void bnxt_hwrm_set_link_common(struct bnxt_softc *softc,
+ struct hwrm_port_phy_cfg_input *req);
+static void bnxt_hwrm_set_pause_common(struct bnxt_softc *softc,
+ struct hwrm_port_phy_cfg_input *req);
+static void bnxt_hwrm_set_eee(struct bnxt_softc *softc,
+ struct hwrm_port_phy_cfg_input *req);
+static int _hwrm_send_message(struct bnxt_softc *, void *, uint32_t);
+static int hwrm_send_message(struct bnxt_softc *, void *, uint32_t);
+static void bnxt_hwrm_cmd_hdr_init(struct bnxt_softc *, void *, uint16_t);
+
+/* NVRam stuff has a five minute timeout */
+#define BNXT_NVM_TIMEO (5 * 60 * 1000)
+
+static int
+bnxt_hwrm_err_map(uint16_t err)
+{
+ int rc;
+
+ switch (err) {
+ case HWRM_ERR_CODE_SUCCESS:
+ return 0;
+ case HWRM_ERR_CODE_INVALID_PARAMS:
+ case HWRM_ERR_CODE_INVALID_FLAGS:
+ case HWRM_ERR_CODE_INVALID_ENABLES:
+ return EINVAL;
+ case HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED:
+ return EACCES;
+ case HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR:
+ return ENOMEM;
+ case HWRM_ERR_CODE_CMD_NOT_SUPPORTED:
+ return ENOSYS;
+ case HWRM_ERR_CODE_FAIL:
+ return EIO;
+ case HWRM_ERR_CODE_HWRM_ERROR:
+ case HWRM_ERR_CODE_UNKNOWN_ERR:
+ default:
+ return EDOOFUS;
+ }
+
+ return rc;
+}
+
+int
+bnxt_alloc_hwrm_dma_mem(struct bnxt_softc *softc)
+{
+ int rc;
+
+ rc = iflib_dma_alloc(softc->ctx, PAGE_SIZE, &softc->hwrm_cmd_resp,
+ BUS_DMA_NOWAIT);
+ return rc;
+}
+
+void
+bnxt_free_hwrm_dma_mem(struct bnxt_softc *softc)
+{
+ if (softc->hwrm_cmd_resp.idi_vaddr)
+ iflib_dma_free(&softc->hwrm_cmd_resp);
+ softc->hwrm_cmd_resp.idi_vaddr = NULL;
+ return;
+}
+
+static void
+bnxt_hwrm_cmd_hdr_init(struct bnxt_softc *softc, void *request,
+ uint16_t req_type)
+{
+ struct input *req = request;
+
+ req->req_type = htole16(req_type);
+ req->cmpl_ring = 0xffff;
+ req->target_id = 0xffff;
+ req->resp_addr = htole64(softc->hwrm_cmd_resp.idi_paddr);
+}
+
+static int
+_hwrm_send_message(struct bnxt_softc *softc, void *msg, uint32_t msg_len)
+{
+ struct input *req = msg;
+ struct hwrm_err_output *resp = (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ uint32_t *data = msg;
+ int i;
+ uint16_t cp_ring_id;
+ uint8_t *valid;
+ uint16_t err;
+
+ /* TODO: DMASYNC in here. */
+ req->seq_id = htole16(softc->hwrm_cmd_seq++);
+ memset(resp, 0, PAGE_SIZE);
+ cp_ring_id = le16toh(req->cmpl_ring);
+
+ /* Write request msg to hwrm channel */
+ for (i = 0; i < msg_len; i += 4) {
+ bus_space_write_4(softc->hwrm_bar.tag,
+ softc->hwrm_bar.handle,
+ i, *data);
+ data++;
+ }
+
+ /* Clear to the end of the request buffer */
+ for (i = msg_len; i < HWRM_MAX_REQ_LEN; i += 4)
+ bus_space_write_4(softc->hwrm_bar.tag, softc->hwrm_bar.handle,
+ i, 0);
+
+ /* Ring channel doorbell */
+ bus_space_write_4(softc->hwrm_bar.tag,
+ softc->hwrm_bar.handle,
+ 0x100, htole32(1));
+
+ /* Check if response len is updated */
+ for (i = 0; i < softc->hwrm_cmd_timeo; i++) {
+ if (resp->resp_len && resp->resp_len <= 4096)
+ break;
+ DELAY(1000);
+ }
+ if (i >= softc->hwrm_cmd_timeo) {
+ device_printf(softc->dev,
+ "Timeout sending %s: (timeout: %u) seq: %d\n",
+ GET_HWRM_REQ_TYPE(req->req_type), softc->hwrm_cmd_timeo,
+ le16toh(req->seq_id));
+ //decode_hwrm_req(req);
+ return ETIMEDOUT;
+ }
+ /* Last byte of resp contains the valid key */
+ valid = (uint8_t *)resp + resp->resp_len - 1;
+ for (i = 0; i < softc->hwrm_cmd_timeo; i++) {
+ if (*valid == HWRM_RESP_VALID_KEY)
+ break;
+ DELAY(1000);
+ }
+ if (i >= softc->hwrm_cmd_timeo) {
+ device_printf(softc->dev, "Timeout sending %s: "
+ "(timeout: %u) msg {0x%x 0x%x} len:%d v: %d\n",
+ GET_HWRM_REQ_TYPE(req->req_type),
+ softc->hwrm_cmd_timeo, le16toh(req->req_type),
+ le16toh(req->seq_id), msg_len,
+ *valid);
+ //decode_hwrm_req(req);
+ return ETIMEDOUT;
+ }
+
+ err = le16toh(resp->error_code);
+ if (err) {
+ /* HWRM_ERR_CODE_FAIL is a "normal" error, don't log */
+ if (err != HWRM_ERR_CODE_FAIL) {
+ device_printf(softc->dev,
+ "%s command returned %s error.\n",
+ GET_HWRM_REQ_TYPE(req->req_type),
+ GET_HWRM_ERROR_CODE(err));
+ }
+ //decode_hwrm_req(req);
+ //decode_hwrm_resp(resp);
+ return bnxt_hwrm_err_map(err);
+ }
+
+ return 0;
+}
+
+static int
+hwrm_send_message(struct bnxt_softc *softc, void *msg, uint32_t msg_len)
+{
+ int rc;
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, msg, msg_len);
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_queue_qportcfg(struct bnxt_softc *softc)
+{
+ struct hwrm_queue_qportcfg_input req = {0};
+ struct hwrm_queue_qportcfg_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+
+ int rc = 0;
+ uint8_t *qptr;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_QUEUE_QPORTCFG);
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto qportcfg_exit;
+
+ if (!resp->max_configurable_queues) {
+ rc = -EINVAL;
+ goto qportcfg_exit;
+ }
+ softc->max_tc = resp->max_configurable_queues;
+ if (softc->max_tc > BNXT_MAX_QUEUE)
+ softc->max_tc = BNXT_MAX_QUEUE;
+
+ qptr = &resp->queue_id0;
+ for (int i = 0; i < softc->max_tc; i++) {
+ softc->q_info[i].id = *qptr++;
+ softc->q_info[i].profile = *qptr++;
+ }
+
+qportcfg_exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return (rc);
+}
+
+
+int
+bnxt_hwrm_ver_get(struct bnxt_softc *softc)
+{
+ struct hwrm_ver_get_input req = {0};
+ struct hwrm_ver_get_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+ const char nastr[] = "<not installed>";
+ const char naver[] = "<N/A>";
+
+ softc->hwrm_max_req_len = HWRM_MAX_REQ_LEN;
+ softc->hwrm_cmd_timeo = 1000;
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_VER_GET);
+
+ req.hwrm_intf_maj = HWRM_VERSION_MAJOR;
+ req.hwrm_intf_min = HWRM_VERSION_MINOR;
+ req.hwrm_intf_upd = HWRM_VERSION_UPDATE;
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto fail;
+
+ snprintf(softc->ver_info->hwrm_if_ver, BNXT_VERSTR_SIZE, "%d.%d.%d",
+ resp->hwrm_intf_maj, resp->hwrm_intf_min, resp->hwrm_intf_upd);
+ softc->ver_info->hwrm_if_major = resp->hwrm_intf_maj;
+ softc->ver_info->hwrm_if_minor = resp->hwrm_intf_min;
+ softc->ver_info->hwrm_if_update = resp->hwrm_intf_upd;
+ snprintf(softc->ver_info->hwrm_fw_ver, BNXT_VERSTR_SIZE, "%d.%d.%d",
+ resp->hwrm_fw_maj, resp->hwrm_fw_min, resp->hwrm_fw_bld);
+ strlcpy(softc->ver_info->driver_hwrm_if_ver, HWRM_VERSION_STR,
+ BNXT_VERSTR_SIZE);
+ strlcpy(softc->ver_info->hwrm_fw_name, resp->hwrm_fw_name,
+ BNXT_NAME_SIZE);
+
+ if (resp->mgmt_fw_maj == 0 && resp->mgmt_fw_min == 0 &&
+ resp->mgmt_fw_bld == 0) {
+ strlcpy(softc->ver_info->mgmt_fw_ver, naver, BNXT_VERSTR_SIZE);
+ strlcpy(softc->ver_info->mgmt_fw_name, nastr, BNXT_NAME_SIZE);
+ }
+ else {
+ snprintf(softc->ver_info->mgmt_fw_ver, BNXT_VERSTR_SIZE,
+ "%d.%d.%d", resp->mgmt_fw_maj, resp->mgmt_fw_min,
+ resp->mgmt_fw_bld);
+ strlcpy(softc->ver_info->mgmt_fw_name, resp->mgmt_fw_name,
+ BNXT_NAME_SIZE);
+ }
+ if (resp->netctrl_fw_maj == 0 && resp->netctrl_fw_min == 0 &&
+ resp->netctrl_fw_bld == 0) {
+ strlcpy(softc->ver_info->netctrl_fw_ver, naver,
+ BNXT_VERSTR_SIZE);
+ strlcpy(softc->ver_info->netctrl_fw_name, nastr,
+ BNXT_NAME_SIZE);
+ }
+ else {
+ snprintf(softc->ver_info->netctrl_fw_ver, BNXT_VERSTR_SIZE,
+ "%d.%d.%d", resp->netctrl_fw_maj, resp->netctrl_fw_min,
+ resp->netctrl_fw_bld);
+ strlcpy(softc->ver_info->netctrl_fw_name, resp->netctrl_fw_name,
+ BNXT_NAME_SIZE);
+ }
+ if (resp->roce_fw_maj == 0 && resp->roce_fw_min == 0 &&
+ resp->roce_fw_bld == 0) {
+ strlcpy(softc->ver_info->roce_fw_ver, naver, BNXT_VERSTR_SIZE);
+ strlcpy(softc->ver_info->roce_fw_name, nastr, BNXT_NAME_SIZE);
+ }
+ else {
+ snprintf(softc->ver_info->roce_fw_ver, BNXT_VERSTR_SIZE,
+ "%d.%d.%d", resp->roce_fw_maj, resp->roce_fw_min,
+ resp->roce_fw_bld);
+ strlcpy(softc->ver_info->roce_fw_name, resp->roce_fw_name,
+ BNXT_NAME_SIZE);
+ }
+ softc->ver_info->chip_num = le16toh(resp->chip_num);
+ softc->ver_info->chip_rev = resp->chip_rev;
+ softc->ver_info->chip_metal = resp->chip_metal;
+ softc->ver_info->chip_bond_id = resp->chip_bond_id;
+ softc->ver_info->chip_type = resp->chip_platform_type;
+
+ if (resp->max_req_win_len)
+ softc->hwrm_max_req_len = le16toh(resp->max_req_win_len);
+ if (resp->def_req_timeout)
+ softc->hwrm_cmd_timeo = le16toh(resp->def_req_timeout);
+
+fail:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_func_drv_rgtr(struct bnxt_softc *softc)
+{
+ struct hwrm_func_drv_rgtr_input req = {0};
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FUNC_DRV_RGTR);
+
+ req.enables = htole32(HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER |
+ HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE);
+ req.os_type = htole16(HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD);
+
+ req.ver_maj = __FreeBSD_version / 100000;
+ req.ver_min = (__FreeBSD_version / 1000) % 100;
+ req.ver_upd = (__FreeBSD_version / 100) % 10;
+
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+
+int
+bnxt_hwrm_func_drv_unrgtr(struct bnxt_softc *softc, bool shutdown)
+{
+ struct hwrm_func_drv_unrgtr_input req = {0};
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FUNC_DRV_UNRGTR);
+ if (shutdown == true)
+ req.flags |=
+ HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN;
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+
+static inline int
+_is_valid_ether_addr(uint8_t *addr)
+{
+ char zero_addr[6] = { 0, 0, 0, 0, 0, 0 };
+
+ if ((addr[0] & 1) || (!bcmp(addr, zero_addr, ETHER_ADDR_LEN)))
+ return (FALSE);
+
+ return (TRUE);
+}
+
+static inline void
+get_random_ether_addr(uint8_t *addr)
+{
+ uint8_t temp[ETHER_ADDR_LEN];
+
+ arc4rand(&temp, sizeof(temp), 0);
+ temp[0] &= 0xFE;
+ temp[0] |= 0x02;
+ bcopy(temp, addr, sizeof(temp));
+}
+
+int
+bnxt_hwrm_func_qcaps(struct bnxt_softc *softc)
+{
+ int rc = 0;
+ struct hwrm_func_qcaps_input req = {0};
+ struct hwrm_func_qcaps_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ struct bnxt_func_info *func = &softc->func;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FUNC_QCAPS);
+ req.fid = htole16(0xffff);
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto fail;
+
+ func->fw_fid = le16toh(resp->fid);
+ memcpy(func->mac_addr, resp->mac_address, ETHER_ADDR_LEN);
+ func->max_rsscos_ctxs = le16toh(resp->max_rsscos_ctx);
+ func->max_cp_rings = le16toh(resp->max_cmpl_rings);
+ func->max_tx_rings = le16toh(resp->max_tx_rings);
+ func->max_rx_rings = le16toh(resp->max_rx_rings);
+ func->max_hw_ring_grps = le32toh(resp->max_hw_ring_grps);
+ if (!func->max_hw_ring_grps)
+ func->max_hw_ring_grps = func->max_tx_rings;
+ func->max_l2_ctxs = le16toh(resp->max_l2_ctxs);
+ func->max_vnics = le16toh(resp->max_vnics);
+ func->max_stat_ctxs = le16toh(resp->max_stat_ctx);
+ if (BNXT_PF(softc)) {
+ struct bnxt_pf_info *pf = &softc->pf;
+
+ pf->port_id = le16toh(resp->port_id);
+ pf->first_vf_id = le16toh(resp->first_vf_id);
+ pf->max_vfs = le16toh(resp->max_vfs);
+ pf->max_encap_records = le32toh(resp->max_encap_records);
+ pf->max_decap_records = le32toh(resp->max_decap_records);
+ pf->max_tx_em_flows = le32toh(resp->max_tx_em_flows);
+ pf->max_tx_wm_flows = le32toh(resp->max_tx_wm_flows);
+ pf->max_rx_em_flows = le32toh(resp->max_rx_em_flows);
+ pf->max_rx_wm_flows = le32toh(resp->max_rx_wm_flows);
+ }
+ if (!_is_valid_ether_addr(func->mac_addr)) {
+ device_printf(softc->dev, "Invalid ethernet address, generating random locally administered address");
+ get_random_ether_addr(func->mac_addr);
+ }
+
+fail:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_func_reset(struct bnxt_softc *softc)
+{
+ struct hwrm_func_reset_input req = {0};
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FUNC_RESET);
+ req.enables = 0;
+
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+static void
+bnxt_hwrm_set_link_common(struct bnxt_softc *softc,
+ struct hwrm_port_phy_cfg_input *req)
+{
+ uint8_t autoneg = softc->link_info.autoneg;
+ uint16_t fw_link_speed = softc->link_info.req_link_speed;
+
+ if (autoneg & BNXT_AUTONEG_SPEED) {
+ req->auto_mode |=
+ HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS;
+
+ req->enables |=
+ htole32(HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE);
+ req->flags |=
+ htole32(HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG);
+ } else {
+ req->force_link_speed = htole16(fw_link_speed);
+ req->flags |= htole32(HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE);
+ }
+
+ /* tell chimp that the setting takes effect immediately */
+ req->flags |= htole32(HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY);
+}
+
+
+static void
+bnxt_hwrm_set_pause_common(struct bnxt_softc *softc,
+ struct hwrm_port_phy_cfg_input *req)
+{
+ if (softc->link_info.autoneg & BNXT_AUTONEG_FLOW_CTRL) {
+ req->auto_pause =
+ HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE;
+ if (softc->link_info.req_flow_ctrl &
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX)
+ req->auto_pause |=
+ HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX;
+ if (softc->link_info.req_flow_ctrl &
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX)
+ req->auto_pause |=
+ HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX;
+ req->enables |=
+ htole32(HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE);
+ } else {
+ if (softc->link_info.req_flow_ctrl &
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX)
+ req->force_pause |=
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX;
+ if (softc->link_info.req_flow_ctrl &
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX)
+ req->force_pause |=
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX;
+ req->enables |=
+ htole32(HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE);
+ req->auto_pause = req->force_pause;
+ req->enables |= htole32(
+ HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE);
+ }
+}
+
+
+//JFV this needs interface connection
+static void
+bnxt_hwrm_set_eee(struct bnxt_softc *softc, struct hwrm_port_phy_cfg_input *req)
+{
+ //struct ethtool_eee *eee = &softc->eee;
+ bool eee_enabled = false;
+
+ if (eee_enabled) {
+#if 0
+ uint16_t eee_speeds;
+ uint32_t flags = HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE;
+
+ if (eee->tx_lpi_enabled)
+ flags |= HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI;
+
+ req->flags |= htole32(flags);
+ eee_speeds = bnxt_get_fw_auto_link_speeds(eee->advertised);
+ req->eee_link_speed_mask = htole16(eee_speeds);
+ req->tx_lpi_timer = htole32(eee->tx_lpi_timer);
+#endif
+ } else {
+ req->flags |=
+ htole32(HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE);
+ }
+}
+
+
+int
+bnxt_hwrm_set_link_setting(struct bnxt_softc *softc, bool set_pause,
+ bool set_eee)
+{
+ struct hwrm_port_phy_cfg_input req = {0};
+
+ if (softc->flags & BNXT_FLAG_NPAR)
+ return ENOTSUP;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_PORT_PHY_CFG);
+ if (set_pause)
+ bnxt_hwrm_set_pause_common(softc, &req);
+
+ bnxt_hwrm_set_link_common(softc, &req);
+ if (set_eee)
+ bnxt_hwrm_set_eee(softc, &req);
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+
+int
+bnxt_hwrm_set_pause(struct bnxt_softc *softc)
+{
+ struct hwrm_port_phy_cfg_input req = {0};
+ int rc;
+
+ if (softc->flags & BNXT_FLAG_NPAR)
+ return ENOTSUP;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_PORT_PHY_CFG);
+ bnxt_hwrm_set_pause_common(softc, &req);
+
+ if (softc->link_info.autoneg & BNXT_AUTONEG_FLOW_CTRL)
+ bnxt_hwrm_set_link_common(softc, &req);
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (!rc && !(softc->link_info.autoneg & BNXT_AUTONEG_FLOW_CTRL)) {
+ /* since changing of pause setting doesn't trigger any link
+ * change event, the driver needs to update the current pause
+ * result upon successfully return of the phy_cfg command */
+ softc->link_info.pause =
+ softc->link_info.force_pause = softc->link_info.req_flow_ctrl;
+ softc->link_info.auto_pause = 0;
+ bnxt_report_link(softc);
+ }
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_vnic_cfg(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic)
+{
+ struct hwrm_vnic_cfg_input req = {0};
+ struct hwrm_vnic_cfg_output *resp;
+
+ resp = (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_VNIC_CFG);
+
+ if (vnic->flags & BNXT_VNIC_FLAG_DEFAULT)
+ req.flags |= htole32(HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT);
+ if (vnic->flags & BNXT_VNIC_FLAG_BD_STALL)
+ req.flags |= htole32(HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE);
+ if (vnic->flags & BNXT_VNIC_FLAG_VLAN_STRIP)
+ req.flags |= htole32(HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE);
+ req.enables = htole32(HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP |
+ HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE |
+ HWRM_VNIC_CFG_INPUT_ENABLES_MRU);
+ req.vnic_id = htole16(vnic->id);
+ req.dflt_ring_grp = htole16(vnic->def_ring_grp);
+ req.rss_rule = htole16(vnic->rss_id);
+ req.cos_rule = htole16(vnic->cos_rule);
+ req.lb_rule = htole16(vnic->lb_rule);
+ req.mru = htole16(vnic->mru);
+
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+int
+bnxt_hwrm_vnic_alloc(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic)
+{
+ struct hwrm_vnic_alloc_input req = {0};
+ struct hwrm_vnic_alloc_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+
+ if (vnic->id != (uint16_t)HWRM_NA_SIGNATURE) {
+ device_printf(softc->dev,
+ "Attempt to re-allocate vnic %04x\n", vnic->id);
+ return EDOOFUS;
+ }
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_VNIC_ALLOC);
+
+ if (vnic->flags & BNXT_VNIC_FLAG_DEFAULT)
+ req.flags = htole32(HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT);
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto fail;
+
+ vnic->id = le32toh(resp->vnic_id);
+
+fail:
+ BNXT_HWRM_UNLOCK(softc);
+ return (rc);
+}
+
+int
+bnxt_hwrm_vnic_ctx_alloc(struct bnxt_softc *softc, uint16_t *ctx_id)
+{
+ struct hwrm_vnic_rss_cos_lb_ctx_alloc_input req = {0};
+ struct hwrm_vnic_rss_cos_lb_ctx_alloc_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+
+ if (*ctx_id != (uint16_t)HWRM_NA_SIGNATURE) {
+ device_printf(softc->dev,
+ "Attempt to re-allocate vnic ctx %04x\n", *ctx_id);
+ return EDOOFUS;
+ }
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_VNIC_RSS_COS_LB_CTX_ALLOC);
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto fail;
+
+ *ctx_id = le32toh(resp->rss_cos_lb_ctx_id);
+
+fail:
+ BNXT_HWRM_UNLOCK(softc);
+ return (rc);
+}
+
+int
+bnxt_hwrm_ring_grp_alloc(struct bnxt_softc *softc, struct bnxt_grp_info *grp)
+{
+ struct hwrm_ring_grp_alloc_input req = {0};
+ struct hwrm_ring_grp_alloc_output *resp;
+ int rc = 0;
+
+ if (grp->grp_id != (uint16_t)HWRM_NA_SIGNATURE) {
+ device_printf(softc->dev,
+ "Attempt to re-allocate ring group %04x\n", grp->grp_id);
+ return EDOOFUS;
+ }
+
+ resp = (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_RING_GRP_ALLOC);
+ req.cr = htole16(grp->cp_ring_id);
+ req.rr = htole16(grp->rx_ring_id);
+ req.ar = htole16(grp->ag_ring_id);
+ req.sc = htole16(grp->stats_ctx);
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto fail;
+
+ grp->grp_id = le32toh(resp->ring_group_id);
+
+fail:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+/*
+ * Ring allocation message to the firmware
+ */
+int
+bnxt_hwrm_ring_alloc(struct bnxt_softc *softc, uint8_t type,
+ struct bnxt_ring *ring, uint16_t cmpl_ring_id, uint32_t stat_ctx_id,
+ bool irq)
+{
+ struct hwrm_ring_alloc_input req = {0};
+ struct hwrm_ring_alloc_output *resp;
+ int rc;
+
+ if (ring->phys_id != (uint16_t)HWRM_NA_SIGNATURE) {
+ device_printf(softc->dev,
+ "Attempt to re-allocate ring %04x\n", ring->phys_id);
+ return EDOOFUS;
+ }
+
+ resp = (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_RING_ALLOC);
+ req.enables = htole32(0);
+ req.fbo = htole32(0);
+
+ if (stat_ctx_id != HWRM_NA_SIGNATURE) {
+ req.enables |= htole32(
+ HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID);
+ req.stat_ctx_id = htole32(stat_ctx_id);
+ }
+ req.ring_type = type;
+ req.page_tbl_addr = htole64(ring->paddr);
+ req.length = htole32(ring->ring_size);
+ req.logical_id = htole16(ring->id);
+ req.cmpl_ring_id = htole16(cmpl_ring_id);
+ req.queue_id = htole16(softc->q_info[0].id);
+#if 0
+ /* MODE_POLL appears to crash the firmware */
+ if (irq)
+ req.int_mode = HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX;
+ else
+ req.int_mode = HWRM_RING_ALLOC_INPUT_INT_MODE_POLL;
+#else
+ req.int_mode = HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX;
+#endif
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto fail;
+
+ ring->phys_id = le16toh(resp->ring_id);
+
+fail:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_stat_ctx_alloc(struct bnxt_softc *softc, struct bnxt_cp_ring *cpr,
+ uint64_t paddr)
+{
+ struct hwrm_stat_ctx_alloc_input req = {0};
+ struct hwrm_stat_ctx_alloc_output *resp;
+ int rc = 0;
+
+ if (cpr->stats_ctx_id != HWRM_NA_SIGNATURE) {
+ device_printf(softc->dev,
+ "Attempt to re-allocate stats ctx %08x\n",
+ cpr->stats_ctx_id);
+ return EDOOFUS;
+ }
+
+ resp = (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_STAT_CTX_ALLOC);
+
+ req.update_period_ms = htole32(1000);
+ req.stats_dma_addr = htole64(paddr);
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto fail;
+
+ cpr->stats_ctx_id = le32toh(resp->stat_ctx_id);
+
+fail:
+ BNXT_HWRM_UNLOCK(softc);
+
+ return rc;
+}
+
+int
+bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt_softc *softc,
+ struct bnxt_vnic_info *vnic)
+{
+ struct hwrm_cfa_l2_set_rx_mask_input req = {0};
+ struct bnxt_vlan_tag *tag;
+ uint32_t *tags;
+ uint32_t num_vlan_tags = 0;;
+ uint32_t i;
+ uint32_t mask = vnic->rx_mask;
+ int rc;
+
+ SLIST_FOREACH(tag, &vnic->vlan_tags, next)
+ num_vlan_tags++;
+
+ if (num_vlan_tags) {
+ if (!(mask &
+ HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN)) {
+ if (!vnic->vlan_only)
+ mask |= HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN;
+ else
+ mask |=
+ HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY;
+ }
+ if (vnic->vlan_tag_list.idi_vaddr) {
+ iflib_dma_free(&vnic->vlan_tag_list);
+ vnic->vlan_tag_list.idi_vaddr = NULL;
+ }
+ rc = iflib_dma_alloc(softc->ctx, 4 * num_vlan_tags,
+ &vnic->vlan_tag_list, BUS_DMA_NOWAIT);
+ if (rc)
+ return rc;
+ tags = (uint32_t *)vnic->vlan_tag_list.idi_vaddr;
+
+ i = 0;
+ SLIST_FOREACH(tag, &vnic->vlan_tags, next) {
+ tags[i] = htole32((tag->tpid << 16) | tag->tag);
+ i++;
+ }
+ }
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_CFA_L2_SET_RX_MASK);
+
+ req.vnic_id = htole32(vnic->id);
+ req.mask = htole32(mask);
+ req.mc_tbl_addr = htole64(vnic->mc_list.idi_paddr);
+ req.num_mc_entries = htole32(vnic->mc_list_count);
+ req.vlan_tag_tbl_addr = htole64(vnic->vlan_tag_list.idi_paddr);
+ req.num_vlan_tags = htole32(num_vlan_tags);
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+
+int
+bnxt_hwrm_set_filter(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic)
+{
+ struct hwrm_cfa_l2_filter_alloc_input req = {0};
+ struct hwrm_cfa_l2_filter_alloc_output *resp;
+ uint32_t enables = 0;
+ int rc = 0;
+
+ if (vnic->filter_id != -1) {
+ device_printf(softc->dev,
+ "Attempt to re-allocate l2 ctx filter\n");
+ return EDOOFUS;
+ }
+
+ resp = (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_CFA_L2_FILTER_ALLOC);
+
+ req.flags = htole32(HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX);
+ enables = HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR
+ | HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK
+ | HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID;
+ req.enables = htole32(enables);
+ req.dst_id = htole16(vnic->id);
+ memcpy(req.l2_addr, if_getlladdr(iflib_get_ifp(softc->ctx)),
+ ETHER_ADDR_LEN);
+ memset(&req.l2_addr_mask, 0xff, sizeof(req.l2_addr_mask));
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto fail;
+
+ vnic->filter_id = le64toh(resp->l2_filter_id);
+ vnic->flow_id = le64toh(resp->flow_id);
+
+fail:
+ BNXT_HWRM_UNLOCK(softc);
+ return (rc);
+}
+
+int
+bnxt_hwrm_rss_cfg(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic,
+ uint32_t hash_type)
+{
+ struct hwrm_vnic_rss_cfg_input req = {0};
+ struct hwrm_vnic_rss_cfg_output *resp;
+
+ resp = (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_VNIC_RSS_CFG);
+
+ req.hash_type = htole32(hash_type);
+ req.ring_grp_tbl_addr = htole64(vnic->rss_grp_tbl.idi_paddr);
+ req.hash_key_tbl_addr = htole64(vnic->rss_hash_key_tbl.idi_paddr);
+ req.rss_ctx_idx = htole16(vnic->rss_id);
+
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+int
+bnxt_hwrm_func_cfg(struct bnxt_softc *softc)
+{
+ struct hwrm_func_cfg_input req = {0};
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FUNC_CFG);
+
+ req.fid = 0xffff;
+ req.enables = htole32(HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR);
+
+ req.async_event_cr = softc->def_cp_ring.ring.phys_id;
+
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+int
+bnxt_hwrm_vnic_tpa_cfg(struct bnxt_softc *softc, struct bnxt_vnic_info *vnic,
+ uint32_t flags)
+{
+ struct hwrm_vnic_tpa_cfg_input req = {0};
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_VNIC_TPA_CFG);
+
+ req.flags = htole32(flags);
+ req.vnic_id = htole16(vnic->id);
+ req.enables = htole32(HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS |
+ HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS |
+ /* HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER | */
+ HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN);
+ /* TODO: Calculate this based on ring size? */
+ req.max_agg_segs = htole16(3);
+ /* Base this in the allocated TPA start size... */
+ req.max_aggs = htole16(2);
+ /* TODO: max_agg_timer? */
+ // req.mag_agg_timer = htole32(XXX);
+ req.min_agg_len = htole32(0);
+
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+int
+bnxt_hwrm_nvm_find_dir_entry(struct bnxt_softc *softc, uint16_t type,
+ uint16_t *ordinal, uint16_t ext, uint16_t *index, bool use_index,
+ uint8_t search_opt, uint32_t *data_length, uint32_t *item_length,
+ uint32_t *fw_ver)
+{
+ struct hwrm_nvm_find_dir_entry_input req = {0};
+ struct hwrm_nvm_find_dir_entry_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc = 0;
+ uint32_t old_timeo;
+
+ MPASS(ordinal);
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_FIND_DIR_ENTRY);
+ if (use_index) {
+ req.enables = htole32(
+ HWRM_NVM_FIND_DIR_ENTRY_INPUT_ENABLES_DIR_IDX_VALID);
+ req.dir_idx = htole16(*index);
+ }
+ req.dir_type = htole16(type);
+ req.dir_ordinal = htole16(*ordinal);
+ req.dir_ext = htole16(ext);
+ req.opt_ordinal = search_opt;
+
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ if (rc)
+ goto exit;
+
+ if (item_length)
+ *item_length = le32toh(resp->dir_item_length);
+ if (data_length)
+ *data_length = le32toh(resp->dir_data_length);
+ if (fw_ver)
+ *fw_ver = le32toh(resp->fw_ver);
+ *ordinal = le16toh(resp->dir_ordinal);
+ if (index)
+ *index = le16toh(resp->dir_idx);
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return (rc);
+}
+
+int
+bnxt_hwrm_nvm_read(struct bnxt_softc *softc, uint16_t index, uint32_t offset,
+ uint32_t length, struct iflib_dma_info *data)
+{
+ struct hwrm_nvm_read_input req = {0};
+ int rc;
+ uint32_t old_timeo;
+
+ if (length > data->idi_size) {
+ rc = EINVAL;
+ goto exit;
+ }
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_READ);
+ req.host_dest_addr = htole64(data->idi_paddr);
+ req.dir_idx = htole16(index);
+ req.offset = htole32(offset);
+ req.len = htole32(length);
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ BNXT_HWRM_UNLOCK(softc);
+ if (rc)
+ goto exit;
+ bus_dmamap_sync(data->idi_tag, data->idi_map, BUS_DMASYNC_POSTREAD);
+
+ goto exit;
+
+exit:
+ return rc;
+}
+
+int
+bnxt_hwrm_nvm_modify(struct bnxt_softc *softc, uint16_t index, uint32_t offset,
+ void *data, bool cpyin, uint32_t length)
+{
+ struct hwrm_nvm_modify_input req = {0};
+ struct iflib_dma_info dma_data;
+ int rc;
+ uint32_t old_timeo;
+
+ if (length == 0 || !data)
+ return EINVAL;
+ rc = iflib_dma_alloc(softc->ctx, length, &dma_data,
+ BUS_DMA_NOWAIT);
+ if (rc)
+ return ENOMEM;
+ if (cpyin) {
+ rc = copyin(data, dma_data.idi_vaddr, length);
+ if (rc)
+ goto exit;
+ }
+ else
+ memcpy(dma_data.idi_vaddr, data, length);
+ bus_dmamap_sync(dma_data.idi_tag, dma_data.idi_map,
+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_MODIFY);
+ req.host_src_addr = htole64(dma_data.idi_paddr);
+ req.dir_idx = htole16(index);
+ req.offset = htole32(offset);
+ req.len = htole32(length);
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ BNXT_HWRM_UNLOCK(softc);
+
+exit:
+ iflib_dma_free(&dma_data);
+ return rc;
+}
+
+int
+bnxt_hwrm_fw_reset(struct bnxt_softc *softc, uint8_t processor,
+ uint8_t *selfreset)
+{
+ struct hwrm_fw_reset_input req = {0};
+ struct hwrm_fw_reset_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+
+ MPASS(selfreset);
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FW_RESET);
+ req.embedded_proc_type = processor;
+ req.selfrst_status = *selfreset;
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto exit;
+ *selfreset = resp->selfrst_status;
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_fw_qstatus(struct bnxt_softc *softc, uint8_t type, uint8_t *selfreset)
+{
+ struct hwrm_fw_qstatus_input req = {0};
+ struct hwrm_fw_qstatus_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+
+ MPASS(selfreset);
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FW_QSTATUS);
+ req.embedded_proc_type = type;
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto exit;
+ *selfreset = resp->selfrst_status;
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_nvm_write(struct bnxt_softc *softc, void *data, bool cpyin,
+ uint16_t type, uint16_t ordinal, uint16_t ext, uint16_t attr,
+ uint16_t option, uint32_t data_length, bool keep, uint32_t *item_length,
+ uint16_t *index)
+{
+ struct hwrm_nvm_write_input req = {0};
+ struct hwrm_nvm_write_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ struct iflib_dma_info dma_data;
+ int rc;
+ uint32_t old_timeo;
+
+ if (data_length) {
+ rc = iflib_dma_alloc(softc->ctx, data_length, &dma_data,
+ BUS_DMA_NOWAIT);
+ if (rc)
+ return ENOMEM;
+ if (cpyin) {
+ rc = copyin(data, dma_data.idi_vaddr, data_length);
+ if (rc)
+ goto early_exit;
+ }
+ else
+ memcpy(dma_data.idi_vaddr, data, data_length);
+ bus_dmamap_sync(dma_data.idi_tag, dma_data.idi_map,
+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+ }
+ else
+ dma_data.idi_paddr = 0;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_WRITE);
+
+ req.host_src_addr = htole64(dma_data.idi_paddr);
+ req.dir_type = htole16(type);
+ req.dir_ordinal = htole16(ordinal);
+ req.dir_ext = htole16(ext);
+ req.dir_attr = htole16(attr);
+ req.dir_data_length = htole32(data_length);
+ req.option = htole16(option);
+ if (keep) {
+ req.flags =
+ htole16(HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG);
+ }
+ if (item_length)
+ req.dir_item_length = htole32(*item_length);
+
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ if (rc)
+ goto exit;
+ if (item_length)
+ *item_length = le32toh(resp->dir_item_length);
+ if (index)
+ *index = le16toh(resp->dir_idx);
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+early_exit:
+ if (data_length)
+ iflib_dma_free(&dma_data);
+ return rc;
+}
+
+int
+bnxt_hwrm_nvm_erase_dir_entry(struct bnxt_softc *softc, uint16_t index)
+{
+ struct hwrm_nvm_erase_dir_entry_input req = {0};
+ uint32_t old_timeo;
+ int rc;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_ERASE_DIR_ENTRY);
+ req.dir_idx = htole16(index);
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_nvm_get_dir_info(struct bnxt_softc *softc, uint32_t *entries,
+ uint32_t *entry_length)
+{
+ struct hwrm_nvm_get_dir_info_input req = {0};
+ struct hwrm_nvm_get_dir_info_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+ uint32_t old_timeo;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_GET_DIR_INFO);
+
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ if (rc)
+ goto exit;
+
+ if (entries)
+ *entries = le32toh(resp->entries);
+ if (entry_length)
+ *entry_length = le32toh(resp->entry_length);
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_nvm_get_dir_entries(struct bnxt_softc *softc, uint32_t *entries,
+ uint32_t *entry_length, struct iflib_dma_info *dma_data)
+{
+ struct hwrm_nvm_get_dir_entries_input req = {0};
+ uint32_t ent;
+ uint32_t ent_len;
+ int rc;
+ uint32_t old_timeo;
+
+ if (!entries)
+ entries = &ent;
+ if (!entry_length)
+ entry_length = &ent_len;
+
+ rc = bnxt_hwrm_nvm_get_dir_info(softc, entries, entry_length);
+ if (rc)
+ goto exit;
+ if (*entries * *entry_length > dma_data->idi_size) {
+ rc = EINVAL;
+ goto exit;
+ }
+
+ /*
+ * TODO: There's a race condition here that could blow up DMA memory...
+ * we need to allocate the max size, not the currently in use
+ * size. The command should totally have a max size here.
+ */
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_GET_DIR_ENTRIES);
+ req.host_dest_addr = htole64(dma_data->idi_paddr);
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ BNXT_HWRM_UNLOCK(softc);
+ if (rc)
+ goto exit;
+ bus_dmamap_sync(dma_data->idi_tag, dma_data->idi_map,
+ BUS_DMASYNC_POSTWRITE);
+
+exit:
+ return rc;
+}
+
+int
+bnxt_hwrm_nvm_get_dev_info(struct bnxt_softc *softc, uint16_t *mfg_id,
+ uint16_t *device_id, uint32_t *sector_size, uint32_t *nvram_size,
+ uint32_t *reserved_size, uint32_t *available_size)
+{
+ struct hwrm_nvm_get_dev_info_input req = {0};
+ struct hwrm_nvm_get_dev_info_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+ uint32_t old_timeo;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_GET_DEV_INFO);
+
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ if (rc)
+ goto exit;
+
+ if (mfg_id)
+ *mfg_id = le16toh(resp->manufacturer_id);
+ if (device_id)
+ *device_id = le16toh(resp->device_id);
+ if (sector_size)
+ *sector_size = le32toh(resp->sector_size);
+ if (nvram_size)
+ *nvram_size = le32toh(resp->nvram_size);
+ if (reserved_size)
+ *reserved_size = le32toh(resp->reserved_size);
+ if (available_size)
+ *available_size = le32toh(resp->available_size);
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_nvm_install_update(struct bnxt_softc *softc,
+ uint32_t install_type, uint64_t *installed_items, uint8_t *result,
+ uint8_t *problem_item, uint8_t *reset_required)
+{
+ struct hwrm_nvm_install_update_input req = {0};
+ struct hwrm_nvm_install_update_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+ uint32_t old_timeo;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_INSTALL_UPDATE);
+ req.install_type = htole32(install_type);
+
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ if (rc)
+ goto exit;
+
+ if (installed_items)
+ *installed_items = le32toh(resp->installed_items);
+ if (result)
+ *result = resp->result;
+ if (problem_item)
+ *problem_item = resp->problem_item;
+ if (reset_required)
+ *reset_required = resp->reset_required;
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_nvm_verify_update(struct bnxt_softc *softc, uint16_t type,
+ uint16_t ordinal, uint16_t ext)
+{
+ struct hwrm_nvm_verify_update_input req = {0};
+ uint32_t old_timeo;
+ int rc;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_NVM_VERIFY_UPDATE);
+
+ req.dir_type = htole16(type);
+ req.dir_ordinal = htole16(ordinal);
+ req.dir_ext = htole16(ext);
+
+ BNXT_HWRM_LOCK(softc);
+ old_timeo = softc->hwrm_cmd_timeo;
+ softc->hwrm_cmd_timeo = BNXT_NVM_TIMEO;
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ softc->hwrm_cmd_timeo = old_timeo;
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_fw_get_time(struct bnxt_softc *softc, uint16_t *year, uint8_t *month,
+ uint8_t *day, uint8_t *hour, uint8_t *minute, uint8_t *second,
+ uint16_t *millisecond, uint16_t *zone)
+{
+ struct hwrm_fw_get_time_input req = {0};
+ struct hwrm_fw_get_time_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc;
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FW_GET_TIME);
+
+ BNXT_HWRM_LOCK(softc);
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto exit;
+
+ if (year)
+ *year = le16toh(resp->year);
+ if (month)
+ *month = resp->month;
+ if (day)
+ *day = resp->day;
+ if (hour)
+ *hour = resp->hour;
+ if (minute)
+ *minute = resp->minute;
+ if (second)
+ *second = resp->second;
+ if (millisecond)
+ *millisecond = le16toh(resp->millisecond);
+ if (zone)
+ *zone = le16toh(resp->zone);
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
+
+int
+bnxt_hwrm_fw_set_time(struct bnxt_softc *softc, uint16_t year, uint8_t month,
+ uint8_t day, uint8_t hour, uint8_t minute, uint8_t second,
+ uint16_t millisecond, uint16_t zone)
+{
+ struct hwrm_fw_set_time_input req = {0};
+
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_FW_SET_TIME);
+
+ req.year = htole16(year);
+ req.month = month;
+ req.day = day;
+ req.hour = hour;
+ req.minute = minute;
+ req.second = second;
+ req.millisecond = htole16(millisecond);
+ req.zone = htole16(zone);
+ return hwrm_send_message(softc, &req, sizeof(req));
+}
+
+int
+bnxt_hwrm_port_phy_qcfg(struct bnxt_softc *softc)
+{
+ struct bnxt_link_info *link_info = &softc->link_info;
+ struct hwrm_port_phy_qcfg_input req = {0};
+ struct hwrm_port_phy_qcfg_output *resp =
+ (void *)softc->hwrm_cmd_resp.idi_vaddr;
+ int rc = 0;
+
+ BNXT_HWRM_LOCK(softc);
+ bnxt_hwrm_cmd_hdr_init(softc, &req, HWRM_PORT_PHY_QCFG);
+
+ rc = _hwrm_send_message(softc, &req, sizeof(req));
+ if (rc)
+ goto exit;
+
+ link_info->phy_link_status = resp->link;
+ link_info->duplex = resp->duplex;
+ link_info->pause = resp->pause;
+ link_info->auto_mode = resp->auto_mode;
+ link_info->auto_pause = resp->auto_pause;
+ link_info->force_pause = resp->force_pause;
+ link_info->duplex_setting = resp->duplex;
+ if (link_info->phy_link_status == HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK)
+ link_info->link_speed = le16toh(resp->link_speed);
+ else
+ link_info->link_speed = 0;
+ link_info->force_link_speed = le16toh(resp->force_link_speed);
+ link_info->auto_link_speed = le16toh(resp->auto_link_speed);
+ link_info->support_speeds = le16toh(resp->support_speeds);
+ link_info->auto_link_speeds = le16toh(resp->auto_link_speed_mask);
+ link_info->preemphasis = le32toh(resp->preemphasis);
+ link_info->phy_ver[0] = resp->phy_maj;
+ link_info->phy_ver[1] = resp->phy_min;
+ link_info->phy_ver[2] = resp->phy_bld;
+ snprintf(softc->ver_info->phy_ver, sizeof(softc->ver_info->phy_ver),
+ "%d.%d.%d", link_info->phy_ver[0], link_info->phy_ver[1],
+ link_info->phy_ver[2]);
+ strlcpy(softc->ver_info->phy_vendor, resp->phy_vendor_name,
+ BNXT_NAME_SIZE);
+ strlcpy(softc->ver_info->phy_partnumber, resp->phy_vendor_partnumber,
+ BNXT_NAME_SIZE);
+ link_info->media_type = resp->media_type;
+ link_info->phy_type = resp->phy_type;
+ link_info->transceiver = resp->xcvr_pkg_type;
+ link_info->phy_addr = resp->eee_config_phy_addr &
+ HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK;
+
+exit:
+ BNXT_HWRM_UNLOCK(softc);
+ return rc;
+}
Index: sys/dev/bnxt/bnxt_ioctl.h
===================================================================
--- /dev/null
+++ sys/dev/bnxt/bnxt_ioctl.h
@@ -0,0 +1,193 @@
+/*-
+ * Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2016 Broadcom, All Rights Reserved.
+ * The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#ifndef _BNXT_IOCTL_H
+#define _BNXT_IOCTL_H
+
+enum bnxt_ioctl_type {
+ BNXT_HWRM_NVM_FIND_DIR_ENTRY,
+ BNXT_HWRM_NVM_READ,
+ BNXT_HWRM_FW_RESET,
+ BNXT_HWRM_FW_QSTATUS,
+ BNXT_HWRM_NVM_WRITE,
+ BNXT_HWRM_NVM_ERASE_DIR_ENTRY,
+ BNXT_HWRM_NVM_GET_DIR_INFO,
+ BNXT_HWRM_NVM_GET_DIR_ENTRIES,
+ BNXT_HWRM_NVM_MODIFY,
+ BNXT_HWRM_NVM_VERIFY_UPDATE,
+ BNXT_HWRM_NVM_INSTALL_UPDATE,
+ BNXT_HWRM_FW_GET_TIME,
+ BNXT_HWRM_FW_SET_TIME,
+};
+
+struct bnxt_ioctl_header {
+ enum bnxt_ioctl_type type;
+ int rc;
+};
+
+struct bnxt_ioctl_hwrm_nvm_find_dir_entry {
+ struct bnxt_ioctl_header hdr;
+ uint32_t data_length;
+ uint32_t fw_ver;
+ uint32_t item_length;
+ uint16_t ext;
+ uint16_t index;
+ uint16_t ordinal;
+ uint16_t type;
+ uint8_t search_opt;
+ bool use_index;
+};
+
+struct bnxt_ioctl_hwrm_nvm_read {
+ struct bnxt_ioctl_header hdr;
+ uint8_t *data;
+ uint32_t length;
+ uint32_t offset;
+ uint16_t index;
+};
+
+struct bnxt_ioctl_hwrm_fw_reset {
+ struct bnxt_ioctl_header hdr;
+ uint8_t processor;
+ uint8_t selfreset;
+};
+
+struct bnxt_ioctl_hwrm_fw_qstatus {
+ struct bnxt_ioctl_header hdr;
+ uint8_t processor;
+ uint8_t selfreset;
+};
+
+struct bnxt_ioctl_hwrm_nvm_write {
+ struct bnxt_ioctl_header hdr;
+ uint8_t *data;
+ uint32_t data_length;
+ uint32_t item_length;
+ uint16_t attr;
+ uint16_t ext;
+ uint16_t index;
+ uint16_t option;
+ uint16_t ordinal;
+ uint16_t type;
+ bool keep;
+};
+
+struct bnxt_ioctl_hwrm_nvm_erase_dir_entry {
+ struct bnxt_ioctl_header hdr;
+ enum bnxt_ioctl_type type;
+ int rc;
+ uint16_t index;
+};
+
+struct bnxt_ioctl_hwrm_nvm_get_dir_info {
+ struct bnxt_ioctl_header hdr;
+ uint32_t entries;
+ uint32_t entry_length;
+};
+
+struct bnxt_ioctl_hwrm_nvm_get_dir_entries {
+ struct bnxt_ioctl_header hdr;
+ uint8_t *data;
+ size_t max_size;
+ uint32_t entries;
+ uint32_t entry_length;
+};
+
+struct bnxt_ioctl_hwrm_nvm_install_update {
+ struct bnxt_ioctl_header hdr;
+ uint64_t installed_items;
+ uint32_t install_type;
+ uint8_t problem_item;
+ uint8_t reset_required;
+ uint8_t result;
+};
+
+struct bnxt_ioctl_hwrm_nvm_verify_update {
+ struct bnxt_ioctl_header hdr;
+ uint16_t ext;
+ uint16_t ordinal;
+ uint16_t type;
+};
+
+struct bnxt_ioctl_hwrm_nvm_modify {
+ struct bnxt_ioctl_header hdr;
+ uint8_t *data;
+ uint32_t length;
+ uint32_t offset;
+ uint16_t index;
+};
+
+struct bnxt_ioctl_hwrm_fw_get_time {
+ struct bnxt_ioctl_header hdr;
+ uint16_t millisecond;
+ uint16_t year;
+ uint16_t zone;
+ uint8_t day;
+ uint8_t hour;
+ uint8_t minute;
+ uint8_t month;
+ uint8_t second;
+};
+
+struct bnxt_ioctl_hwrm_fw_set_time {
+ struct bnxt_ioctl_header hdr;
+ uint16_t millisecond;
+ uint16_t year;
+ uint16_t zone;
+ uint8_t day;
+ uint8_t hour;
+ uint8_t minute;
+ uint8_t month;
+ uint8_t second;
+};
+
+/* IOCTL interface */
+struct bnxt_ioctl_data {
+ union {
+ struct bnxt_ioctl_header hdr;
+ struct bnxt_ioctl_hwrm_nvm_find_dir_entry find;
+ struct bnxt_ioctl_hwrm_nvm_read read;
+ struct bnxt_ioctl_hwrm_fw_reset reset;
+ struct bnxt_ioctl_hwrm_fw_qstatus status;
+ struct bnxt_ioctl_hwrm_nvm_write write;
+ struct bnxt_ioctl_hwrm_nvm_erase_dir_entry erase;
+ struct bnxt_ioctl_hwrm_nvm_get_dir_info dir_info;
+ struct bnxt_ioctl_hwrm_nvm_get_dir_entries dir_entries;
+ struct bnxt_ioctl_hwrm_nvm_install_update install;
+ struct bnxt_ioctl_hwrm_nvm_verify_update verify;
+ struct bnxt_ioctl_hwrm_nvm_modify modify;
+ struct bnxt_ioctl_hwrm_fw_get_time get_time;
+ struct bnxt_ioctl_hwrm_fw_set_time set_time;
+ };
+};
+
+#endif
Index: sys/dev/bnxt/bnxt_sysctl.h
===================================================================
--- /dev/null
+++ sys/dev/bnxt/bnxt_sysctl.h
@@ -0,0 +1,42 @@
+/*-
+ * Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2016 Broadcom, All Rights Reserved.
+ * The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include "bnxt.h"
+
+int bnxt_init_sysctl_ctx(struct bnxt_softc *softc);
+int bnxt_free_sysctl_ctx(struct bnxt_softc *softc);
+int bnxt_create_tx_sysctls(struct bnxt_softc *softc, int txr);
+int bnxt_create_rx_sysctls(struct bnxt_softc *softc, int rxr);
+int bnxt_create_ver_sysctls(struct bnxt_softc *softc);
+int bnxt_create_nvram_sysctls(struct bnxt_nvram_info *ni);
+int bnxt_create_config_sysctls_pre(struct bnxt_softc *softc);
+int bnxt_create_config_sysctls_post(struct bnxt_softc *softc);
Index: sys/dev/bnxt/bnxt_sysctl.c
===================================================================
--- /dev/null
+++ sys/dev/bnxt/bnxt_sysctl.c
@@ -0,0 +1,619 @@
+/*-
+ * Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2016 Broadcom, All Rights Reserved.
+ * The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/types.h>
+#include <sys/sysctl.h>
+
+#include "bnxt.h"
+#include "bnxt_hwrm.h"
+#include "bnxt_sysctl.h"
+
+static int bnxt_vlan_only_sysctl(SYSCTL_HANDLER_ARGS);
+/*
+ * We want to create:
+ * dev.bnxt.0.hwstats.txq0
+ * dev.bnxt.0.hwstats.txq0.txmbufs
+ * dev.bnxt.0.hwstats.rxq0
+ * dev.bnxt.0.hwstats.txq0.rxmbufs
+ * so the hwstats ctx list needs to be created in attach_post and populated
+ * during init.
+ *
+ * Then, it needs to be cleaned up in stop.
+ */
+
+int
+bnxt_init_sysctl_ctx(struct bnxt_softc *softc)
+{
+ struct sysctl_ctx_list *ctx;
+
+ sysctl_ctx_init(&softc->hw_stats);
+ ctx = device_get_sysctl_ctx(softc->dev);
+ softc->hw_stats_oid = SYSCTL_ADD_NODE(ctx,
+ SYSCTL_CHILDREN(device_get_sysctl_tree(softc->dev)), OID_AUTO,
+ "hwstats", CTLFLAG_RD, 0, "hardware statistics");
+ if (!softc->hw_stats_oid) {
+ sysctl_ctx_free(&softc->hw_stats);
+ return ENOMEM;
+ }
+
+ sysctl_ctx_init(&softc->ver_info->ver_ctx);
+ ctx = device_get_sysctl_ctx(softc->dev);
+ softc->ver_info->ver_oid = SYSCTL_ADD_NODE(ctx,
+ SYSCTL_CHILDREN(device_get_sysctl_tree(softc->dev)), OID_AUTO,
+ "ver", CTLFLAG_RD, 0, "hardware/firmware version information");
+ if (!softc->ver_info->ver_oid) {
+ sysctl_ctx_free(&softc->ver_info->ver_ctx);
+ return ENOMEM;
+ }
+
+ sysctl_ctx_init(&softc->nvm_info->nvm_ctx);
+ ctx = device_get_sysctl_ctx(softc->dev);
+ softc->nvm_info->nvm_oid = SYSCTL_ADD_NODE(ctx,
+ SYSCTL_CHILDREN(device_get_sysctl_tree(softc->dev)), OID_AUTO,
+ "nvram", CTLFLAG_RD, 0, "nvram information");
+ if (!softc->nvm_info->nvm_oid) {
+ sysctl_ctx_free(&softc->nvm_info->nvm_ctx);
+ return ENOMEM;
+ }
+
+ return 0;
+}
+
+int
+bnxt_free_sysctl_ctx(struct bnxt_softc *softc)
+{
+ int orc;
+ int rc = 0;
+
+ if (softc->hw_stats_oid != NULL) {
+ orc = sysctl_ctx_free(&softc->hw_stats);
+ if (orc)
+ rc = orc;
+ else
+ softc->hw_stats_oid = NULL;
+ }
+ if (softc->ver_info->ver_oid != NULL) {
+ orc = sysctl_ctx_free(&softc->ver_info->ver_ctx);
+ if (orc)
+ rc = orc;
+ else
+ softc->ver_info->ver_oid = NULL;
+ }
+ if (softc->nvm_info->nvm_oid != NULL) {
+ orc = sysctl_ctx_free(&softc->nvm_info->nvm_ctx);
+ if (orc)
+ rc = orc;
+ else
+ softc->nvm_info->nvm_oid = NULL;
+ }
+
+ return rc;
+}
+
+int
+bnxt_create_tx_sysctls(struct bnxt_softc *softc, int txr)
+{
+ struct sysctl_oid *oid;
+ struct ctx_hw_stats *tx_stats = (void *)softc->tx_stats.idi_vaddr;
+ char name[32];
+ char desc[64];
+
+ sprintf(name, "txq%d", txr);
+ sprintf(desc, "transmit queue %d", txr);
+ oid = SYSCTL_ADD_NODE(&softc->hw_stats,
+ SYSCTL_CHILDREN(softc->hw_stats_oid), OID_AUTO, name, CTLFLAG_RD, 0,
+ desc);
+ if (!oid)
+ return ENOMEM;
+
+
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "ucast_pkts", CTLFLAG_RD, &tx_stats[txr].tx_ucast_pkts,
+ "unicast packets sent");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "mcast_pkts", CTLFLAG_RD, &tx_stats[txr].tx_mcast_pkts,
+ "multicast packets sent");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "bcast_pkts", CTLFLAG_RD, &tx_stats[txr].tx_bcast_pkts,
+ "broadcast packets sent");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "discard_pkts", CTLFLAG_RD,
+ &tx_stats[txr].tx_discard_pkts, "discarded transmit packets");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "drop_pkts", CTLFLAG_RD, &tx_stats[txr].tx_drop_pkts,
+ "dropped transmit packets");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "ucast_bytes", CTLFLAG_RD, &tx_stats[txr].tx_ucast_bytes,
+ "unicast bytes sent");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "mcast_bytes", CTLFLAG_RD, &tx_stats[txr].tx_mcast_bytes,
+ "multicast bytes sent");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "bcast_bytes", CTLFLAG_RD, &tx_stats[txr].tx_bcast_bytes,
+ "broadcast bytes sent");
+
+ return 0;
+}
+
+int
+bnxt_create_rx_sysctls(struct bnxt_softc *softc, int rxr)
+{
+ struct sysctl_oid *oid;
+ struct ctx_hw_stats *rx_stats = (void *)softc->rx_stats.idi_vaddr;
+ char name[32];
+ char desc[64];
+
+ sprintf(name, "rxq%d", rxr);
+ sprintf(desc, "receive queue %d", rxr);
+ oid = SYSCTL_ADD_NODE(&softc->hw_stats,
+ SYSCTL_CHILDREN(softc->hw_stats_oid), OID_AUTO, name, CTLFLAG_RD, 0,
+ desc);
+ if (!oid)
+ return ENOMEM;
+
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "ucast_pkts", CTLFLAG_RD, &rx_stats[rxr].rx_ucast_pkts,
+ "unicast packets received");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "mcast_pkts", CTLFLAG_RD, &rx_stats[rxr].rx_mcast_pkts,
+ "multicast packets received");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "bcast_pkts", CTLFLAG_RD, &rx_stats[rxr].rx_bcast_pkts,
+ "broadcast packets received");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "discard_pkts", CTLFLAG_RD,
+ &rx_stats[rxr].rx_discard_pkts, "discarded receive packets");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "drop_pkts", CTLFLAG_RD, &rx_stats[rxr].rx_drop_pkts,
+ "dropped receive packets");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "ucast_bytes", CTLFLAG_RD, &rx_stats[rxr].rx_ucast_bytes,
+ "unicast bytes received");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "mcast_bytes", CTLFLAG_RD, &rx_stats[rxr].rx_mcast_bytes,
+ "multicast bytes received");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "bcast_bytes", CTLFLAG_RD, &rx_stats[rxr].rx_bcast_bytes,
+ "broadcast bytes received");
+
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "tpa_pkts", CTLFLAG_RD, &rx_stats[rxr].tpa_pkts,
+ "TPA packets");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "tpa_bytes", CTLFLAG_RD, &rx_stats[rxr].tpa_bytes,
+ "TPA bytes");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "tpa_events", CTLFLAG_RD, &rx_stats[rxr].tpa_events,
+ "TPA events");
+ SYSCTL_ADD_QUAD(&softc->hw_stats, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "tpa_aborts", CTLFLAG_RD, &rx_stats[rxr].tpa_aborts,
+ "TPA aborts");
+
+ return 0;
+}
+
+static char *bnxt_chip_type[] = {
+ "ASIC",
+ "FPGA",
+ "Palladium",
+ "Unknown"
+};
+#define MAX_CHIP_TYPE 3
+
+static int
+bnxt_package_ver_sysctl(SYSCTL_HANDLER_ARGS)
+{
+ struct bnxt_softc *softc = arg1;
+ struct iflib_dma_info dma_data;
+ char *pkglog = NULL;
+ char *p;
+ char *next;
+ char unk[] = "<unknown>";
+ char *buf = unk;
+ int rc;
+ int field;
+ uint16_t ordinal = BNX_DIR_ORDINAL_FIRST;
+ uint16_t index;
+ uint32_t data_len;
+
+ rc = bnxt_hwrm_nvm_find_dir_entry(softc, BNX_DIR_TYPE_PKG_LOG,
+ &ordinal, BNX_DIR_EXT_NONE, &index, false,
+ HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_EQ,
+ &data_len, NULL, NULL);
+ dma_data.idi_vaddr = NULL;
+ if (rc == 0 && data_len) {
+ rc = iflib_dma_alloc(softc->ctx, data_len, &dma_data,
+ BUS_DMA_NOWAIT);
+ if (rc == 0) {
+ rc = bnxt_hwrm_nvm_read(softc, index, 0, data_len,
+ &dma_data);
+ if (rc == 0) {
+ pkglog = dma_data.idi_vaddr;
+ /* NULL terminate (removes last \n) */
+ pkglog[data_len-1] = 0;
+
+ /* Set p = start of last line */
+ p = strrchr(pkglog, '\n');
+ if (p == NULL)
+ p = pkglog;
+
+ /* Now find the correct tab delimited field */
+ for (field = 0, next = p,
+ p = strsep(&next, "\t");
+ field <
+ BNX_PKG_LOG_FIELD_IDX_PKG_VERSION && p;
+ p = strsep(&next, "\t")) {
+ field++;
+ }
+ if (field == BNX_PKG_LOG_FIELD_IDX_PKG_VERSION)
+ buf = p;
+ }
+ }
+ else
+ dma_data.idi_vaddr = NULL;
+ }
+
+ rc = sysctl_handle_string(oidp, buf, 0, req);
+ if (dma_data.idi_vaddr)
+ iflib_dma_free(&dma_data);
+ return rc;
+}
+
+static int
+bnxt_hwrm_min_ver_sysctl(SYSCTL_HANDLER_ARGS)
+{
+ struct bnxt_softc *softc = arg1;
+ char buf[16];
+ uint8_t newver[3];
+ int rc;
+
+ sprintf(buf, "%hhu.%hhu.%hhu", softc->ver_info->hwrm_min_major,
+ softc->ver_info->hwrm_min_minor, softc->ver_info->hwrm_min_update);
+
+ rc = sysctl_handle_string(oidp, buf, sizeof(buf), req);
+ if (rc || req->newptr == NULL)
+ return rc;
+ if (sscanf(buf, "%hhu.%hhu.%hhu%*c", &newver[0], &newver[1],
+ &newver[2]) != 3)
+ return EINVAL;
+ softc->ver_info->hwrm_min_major = newver[0];
+ softc->ver_info->hwrm_min_minor = newver[1];
+ softc->ver_info->hwrm_min_update = newver[2];
+ bnxt_check_hwrm_version(softc);
+
+ return rc;
+}
+
+int
+bnxt_create_ver_sysctls(struct bnxt_softc *softc)
+{
+ struct bnxt_ver_info *vi = softc->ver_info;
+ struct sysctl_oid *oid = vi->ver_oid;
+
+ if (!oid)
+ return ENOMEM;
+
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "hwrm_if", CTLFLAG_RD, vi->hwrm_if_ver, 0,
+ "HWRM interface version");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "driver_hwrm_if", CTLFLAG_RD, vi->driver_hwrm_if_ver, 0,
+ "HWRM firmware version");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "hwrm_fw", CTLFLAG_RD, vi->hwrm_fw_ver, 0,
+ "HWRM firmware version");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "mgmt_fw", CTLFLAG_RD, vi->mgmt_fw_ver, 0,
+ "management firmware version");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "netctrl_fw", CTLFLAG_RD, vi->netctrl_fw_ver, 0,
+ "network control firmware version");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "roce_fw", CTLFLAG_RD, vi->roce_fw_ver, 0,
+ "RoCE firmware version");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "phy", CTLFLAG_RD, vi->phy_ver, 0,
+ "PHY version");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "hwrm_fw_name", CTLFLAG_RD, vi->hwrm_fw_name, 0,
+ "HWRM firmware name");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "mgmt_fw_name", CTLFLAG_RD, vi->mgmt_fw_name, 0,
+ "management firmware name");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "netctrl_fw_name", CTLFLAG_RD, vi->netctrl_fw_name, 0,
+ "network control firmware name");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "roce_fw_name", CTLFLAG_RD, vi->roce_fw_name, 0,
+ "RoCE firmware name");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "phy_vendor", CTLFLAG_RD, vi->phy_vendor, 0,
+ "PHY vendor name");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "phy_partnumber", CTLFLAG_RD, vi->phy_partnumber, 0,
+ "PHY vendor part number");
+ SYSCTL_ADD_U16(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "chip_num", CTLFLAG_RD, &vi->chip_num, 0, "chip number");
+ SYSCTL_ADD_U8(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "chip_rev", CTLFLAG_RD, &vi->chip_rev, 0, "chip revision");
+ SYSCTL_ADD_U8(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "chip_metal", CTLFLAG_RD, &vi->chip_metal, 0, "chip metal number");
+ SYSCTL_ADD_U8(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "chip_bond_id", CTLFLAG_RD, &vi->chip_bond_id, 0,
+ "chip bond id");
+ SYSCTL_ADD_STRING(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "chip_type", CTLFLAG_RD, vi->chip_type > MAX_CHIP_TYPE ?
+ bnxt_chip_type[MAX_CHIP_TYPE] : bnxt_chip_type[vi->chip_type], 0,
+ "RoCE firmware name");
+ SYSCTL_ADD_PROC(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "package_ver", CTLTYPE_STRING|CTLFLAG_RD, softc, 0,
+ bnxt_package_ver_sysctl, "A",
+ "currently installed package version");
+ SYSCTL_ADD_PROC(&vi->ver_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "hwrm_min_ver", CTLTYPE_STRING|CTLFLAG_RWTUN, softc, 0,
+ bnxt_hwrm_min_ver_sysctl, "A",
+ "minimum hwrm API vesion to support");
+
+ return 0;
+}
+
+int
+bnxt_create_nvram_sysctls(struct bnxt_nvram_info *ni)
+{
+ struct sysctl_oid *oid = ni->nvm_oid;
+
+ if (!oid)
+ return ENOMEM;
+
+ SYSCTL_ADD_U16(&ni->nvm_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "mfg_id", CTLFLAG_RD, &ni->mfg_id, 0, "manufacturer id");
+ SYSCTL_ADD_U16(&ni->nvm_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "device_id", CTLFLAG_RD, &ni->device_id, 0, "device id");
+ SYSCTL_ADD_U32(&ni->nvm_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "sector_size", CTLFLAG_RD, &ni->sector_size, 0, "sector size");
+ SYSCTL_ADD_U32(&ni->nvm_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "size", CTLFLAG_RD, &ni->size, 0, "nvram total size");
+ SYSCTL_ADD_U32(&ni->nvm_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "reserved_size", CTLFLAG_RD, &ni->reserved_size, 0,
+ "total reserved space");
+ SYSCTL_ADD_U32(&ni->nvm_ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
+ "available_size", CTLFLAG_RD, &ni->available_size, 0,
+ "total available space");
+
+ return 0;
+}
+
+static int
+bnxt_rss_key_sysctl(SYSCTL_HANDLER_ARGS)
+{
+ struct bnxt_softc *softc = arg1;
+ char buf[HW_HASH_KEY_SIZE*2+1] = {0};
+ char *p;
+ int i;
+ int rc;
+
+ for (p = buf, i=0; i<HW_HASH_KEY_SIZE; i++)
+ p += sprintf(p, "%02x", softc->vnic_info.rss_hash_key[i]);
+
+ rc = sysctl_handle_string(oidp, buf, sizeof(buf), req);
+ if (rc || req->newptr == NULL)
+ return rc;
+
+ if (strspn(buf, "0123456789abcdefABCDEF") != (HW_HASH_KEY_SIZE * 2))
+ return EINVAL;
+
+ for (p = buf, i=0; i<HW_HASH_KEY_SIZE; i++) {
+ if (sscanf(p, "%02hhx", &softc->vnic_info.rss_hash_key[i]) != 1)
+ return EINVAL;
+ p += 2;
+ }
+
+ if (if_getdrvflags(iflib_get_ifp(softc->ctx)) & IFF_DRV_RUNNING)
+ bnxt_hwrm_rss_cfg(softc, &softc->vnic_info,
+ softc->vnic_info.rss_hash_type);
+
+ return rc;
+}
+
+static const char *bnxt_hash_types[] = {"ipv4", "tcp_ipv4", "udp_ipv4", "ipv6",
+ "tcp_ipv6", "udp_ipv6", NULL};
+
+static int bnxt_get_rss_type_str_bit(char *str)
+{
+ int i;
+
+ for (i=0; bnxt_hash_types[i]; i++)
+ if (strcmp(bnxt_hash_types[i], str) == 0)
+ return i;
+
+ return -1;
+}
+
+static int
+bnxt_rss_type_sysctl(SYSCTL_HANDLER_ARGS)
+{
+ struct bnxt_softc *softc = arg1;
+ char buf[256] = {0};
+ char *p;
+ char *next;
+ int rc;
+ int type;
+ int bit;
+
+ for (type = softc->vnic_info.rss_hash_type; type;
+ type &= ~(1<<bit)) {
+ bit = ffs(type) - 1;
+ if (bit >= sizeof(bnxt_hash_types) / sizeof(const char *))
+ continue;
+ if (type != softc->vnic_info.rss_hash_type)
+ strcat(buf, ",");
+ strcat(buf, bnxt_hash_types[bit]);
+ }
+
+ rc = sysctl_handle_string(oidp, buf, sizeof(buf), req);
+ if (rc || req->newptr == NULL)
+ return rc;
+
+ for (type = 0, next = buf, p = strsep(&next, " ,"); p;
+ p = strsep(&next, " ,")) {
+ bit = bnxt_get_rss_type_str_bit(p);
+ if (bit == -1)
+ return EINVAL;
+ type |= 1<<bit;
+ }
+ if (type != softc->vnic_info.rss_hash_type) {
+ softc->vnic_info.rss_hash_type = type;
+ if (if_getdrvflags(iflib_get_ifp(softc->ctx)) & IFF_DRV_RUNNING)
+ bnxt_hwrm_rss_cfg(softc, &softc->vnic_info,
+ softc->vnic_info.rss_hash_type);
+ }
+
+ return rc;
+}
+
+static int
+bnxt_rx_stall_sysctl(SYSCTL_HANDLER_ARGS) {
+ struct bnxt_softc *softc = arg1;
+ int rc;
+ int val;
+
+ if (softc == NULL)
+ return EBUSY;
+
+ val = (bool)(softc->vnic_info.flags & BNXT_VNIC_FLAG_BD_STALL);
+ rc = sysctl_handle_int(oidp, &val, 0, req);
+ if (rc || !req->newptr)
+ return rc;
+
+ if (val)
+ softc->vnic_info.flags |= BNXT_VNIC_FLAG_BD_STALL;
+ else
+ softc->vnic_info.flags &= ~BNXT_VNIC_FLAG_BD_STALL;
+
+ if (if_getdrvflags(iflib_get_ifp(softc->ctx)) & IFF_DRV_RUNNING)
+ rc = bnxt_hwrm_vnic_cfg(softc, &softc->vnic_info);
+
+ return rc;
+}
+
+static int
+bnxt_vlan_strip_sysctl(SYSCTL_HANDLER_ARGS) {
+ struct bnxt_softc *softc = arg1;
+ int rc;
+ int val;
+
+ if (softc == NULL)
+ return EBUSY;
+
+ val = (bool)(softc->vnic_info.flags & BNXT_VNIC_FLAG_VLAN_STRIP);
+ rc = sysctl_handle_int(oidp, &val, 0, req);
+ if (rc || !req->newptr)
+ return rc;
+
+ if (val)
+ softc->vnic_info.flags |= BNXT_VNIC_FLAG_VLAN_STRIP;
+ else
+ softc->vnic_info.flags &= ~BNXT_VNIC_FLAG_VLAN_STRIP;
+
+ if (if_getdrvflags(iflib_get_ifp(softc->ctx)) & IFF_DRV_RUNNING)
+ rc = bnxt_hwrm_vnic_cfg(softc, &softc->vnic_info);
+
+ return rc;
+}
+
+int
+bnxt_create_config_sysctls_pre(struct bnxt_softc *softc)
+{
+ struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(softc->dev);
+ struct sysctl_oid_list *children;
+
+ children = SYSCTL_CHILDREN(device_get_sysctl_tree(softc->dev));;
+
+ SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "rss_key",
+ CTLTYPE_STRING|CTLFLAG_RWTUN, softc, 0, bnxt_rss_key_sysctl, "A",
+ "RSS key");
+ SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "rss_type",
+ CTLTYPE_STRING|CTLFLAG_RWTUN, softc, 0, bnxt_rss_type_sysctl, "A",
+ "RSS type bits");
+ SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "rx_stall",
+ CTLTYPE_INT|CTLFLAG_RWTUN, softc, 0, bnxt_rx_stall_sysctl, "I",
+ "buffer rx packets in hardware until the host posts new buffers");
+ SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "vlan_strip",
+ CTLTYPE_INT|CTLFLAG_RWTUN, softc, 0, bnxt_vlan_strip_sysctl, "I",
+ "strip VLAN tag in the RX path");
+ SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "if_name", CTLFLAG_RD,
+ iflib_get_ifp(softc->ctx)->if_xname, 0, "interface name");
+
+ return 0;
+}
+
+static int
+bnxt_vlan_only_sysctl(SYSCTL_HANDLER_ARGS) {
+ struct bnxt_softc *softc = arg1;
+ int rc;
+ int val;
+
+ if (softc == NULL)
+ return EBUSY;
+
+ val = softc->vnic_info.vlan_only;
+ rc = sysctl_handle_int(oidp, &val, 0, req);
+ if (rc || !req->newptr)
+ return rc;
+
+ if (val)
+ val = 1;
+
+ if (val != softc->vnic_info.vlan_only) {
+ softc->vnic_info.vlan_only = val;
+ if (if_getdrvflags(iflib_get_ifp(softc->ctx)) & IFF_DRV_RUNNING)
+ rc = bnxt_hwrm_cfa_l2_set_rx_mask(softc,
+ &softc->vnic_info);
+ }
+
+ return rc;
+}
+
+int
+bnxt_create_config_sysctls_post(struct bnxt_softc *softc)
+{
+ struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(softc->dev);
+ struct sysctl_oid_list *children;
+
+ children = SYSCTL_CHILDREN(device_get_sysctl_tree(softc->dev));;
+
+ SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "vlan_only",
+ CTLTYPE_INT|CTLFLAG_RWTUN, softc, 0, bnxt_vlan_only_sysctl, "I",
+ "require vlan tag on received packets when vlan is enabled");
+
+ return 0;
+}
Index: sys/dev/bnxt/bnxt_txrx.c
===================================================================
--- /dev/null
+++ sys/dev/bnxt/bnxt_txrx.c
@@ -0,0 +1,639 @@
+/*-
+ * Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2016 Broadcom, All Rights Reserved.
+ * The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/endian.h>
+#include <net/if.h>
+#include <net/if_var.h>
+#include <net/ethernet.h>
+#include <net/iflib.h>
+
+#include "opt_inet.h"
+#include "opt_inet6.h"
+#include "opt_rss.h"
+
+#include "bnxt.h"
+
+/*
+ * Function prototypes
+ */
+
+static int bnxt_isc_txd_encap(void *sc, if_pkt_info_t pi);
+static void bnxt_isc_txd_flush(void *sc, uint16_t txqid, uint32_t pidx);
+static int bnxt_isc_txd_credits_update(void *sc, uint16_t txqid, uint32_t cidx,
+ bool clear);
+
+static void bnxt_isc_rxd_refill(void *sc, uint16_t rxqid, uint8_t flid,
+ uint32_t pidx, uint64_t *paddrs, caddr_t *vaddrs, uint16_t count,
+ uint16_t buf_size);
+static void bnxt_isc_rxd_flush(void *sc, uint16_t rxqid, uint8_t flid,
+ uint32_t pidx);
+static int bnxt_isc_rxd_available(void *sc, uint16_t rxqid, uint32_t idx,
+ int budget);
+static int bnxt_isc_rxd_pkt_get(void *sc, if_rxd_info_t ri);
+
+static int bnxt_intr(void *sc);
+
+struct if_txrx bnxt_txrx = {
+ bnxt_isc_txd_encap,
+ bnxt_isc_txd_flush,
+ bnxt_isc_txd_credits_update,
+ bnxt_isc_rxd_available,
+ bnxt_isc_rxd_pkt_get,
+ bnxt_isc_rxd_refill,
+ bnxt_isc_rxd_flush,
+ bnxt_intr
+};
+
+/*
+ * Device Dependent Packet Transmit and Receive Functions
+ */
+
+static const uint16_t bnxt_tx_lhint[] = {
+ TX_BD_SHORT_FLAGS_LHINT_LT512,
+ TX_BD_SHORT_FLAGS_LHINT_LT1K,
+ TX_BD_SHORT_FLAGS_LHINT_LT2K,
+ TX_BD_SHORT_FLAGS_LHINT_LT2K,
+ TX_BD_SHORT_FLAGS_LHINT_GTE2K,
+};
+
+static int
+bnxt_isc_txd_encap(void *sc, if_pkt_info_t pi)
+{
+ struct bnxt_softc *softc = (struct bnxt_softc *)sc;
+ struct bnxt_ring *txr = &softc->tx_rings[pi->ipi_qsidx];
+ struct tx_bd_long *tbd;
+ struct tx_bd_long_hi *tbdh;
+ bool need_hi = false;
+ uint16_t flags_type;
+ uint16_t lflags;
+ uint32_t cfa_meta;
+ int seg = 0;
+
+ /* If we have offloads enabled, we need to use two BDs. */
+ if ((pi->ipi_csum_flags & (CSUM_OFFLOAD | CSUM_TSO | CSUM_IP)) ||
+ pi->ipi_mflags & M_VLANTAG)
+ need_hi = true;
+
+ pi->ipi_new_pidx = pi->ipi_pidx;
+ tbd = &((struct tx_bd_long *)txr->vaddr)[pi->ipi_new_pidx];
+ pi->ipi_ndescs = 0;
+ /* No need to byte-swap the opaque value */
+ tbd->opaque = ((pi->ipi_nsegs + need_hi) << 24) | pi->ipi_new_pidx;
+ tbd->len = htole16(pi->ipi_segs[seg].ds_len);
+ tbd->addr = htole64(pi->ipi_segs[seg++].ds_addr);
+ flags_type = ((pi->ipi_nsegs + need_hi) <<
+ TX_BD_SHORT_FLAGS_BD_CNT_SFT) & TX_BD_SHORT_FLAGS_BD_CNT_MASK;
+ if (pi->ipi_len >= 2048)
+ flags_type |= TX_BD_SHORT_FLAGS_LHINT_GTE2K;
+ else
+ flags_type |= bnxt_tx_lhint[pi->ipi_len >> 9];
+
+ if (need_hi) {
+ flags_type |= TX_BD_LONG_TYPE_TX_BD_LONG;
+
+ pi->ipi_new_pidx = RING_NEXT(txr, pi->ipi_new_pidx);
+ tbdh = &((struct tx_bd_long_hi *)txr->vaddr)[pi->ipi_new_pidx];
+ tbdh->mss = htole16(pi->ipi_tso_segsz);
+ tbdh->hdr_size = htole16((pi->ipi_ehdrlen + pi->ipi_ip_hlen +
+ pi->ipi_tcp_hlen) >> 1);
+ tbdh->cfa_action = 0;
+ lflags = 0;
+ cfa_meta = 0;
+ if (pi->ipi_mflags & M_VLANTAG) {
+ /* TODO: Do we need to byte-swap the vtag here? */
+ cfa_meta = TX_BD_LONG_CFA_META_KEY_VLAN_TAG |
+ pi->ipi_vtag;
+ cfa_meta |= TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100;
+ }
+ tbdh->cfa_meta = htole32(cfa_meta);
+ if (pi->ipi_csum_flags & CSUM_TSO) {
+ lflags |= TX_BD_LONG_LFLAGS_LSO |
+ TX_BD_LONG_LFLAGS_T_IPID;
+ }
+ else if(pi->ipi_csum_flags & CSUM_OFFLOAD) {
+ lflags |= TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM |
+ TX_BD_LONG_LFLAGS_IP_CHKSUM;
+ }
+ else if(pi->ipi_csum_flags & CSUM_IP) {
+ lflags |= TX_BD_LONG_LFLAGS_IP_CHKSUM;
+ }
+ tbdh->lflags = htole16(lflags);
+ }
+ else {
+ flags_type |= TX_BD_SHORT_TYPE_TX_BD_SHORT;
+ }
+
+ for (; seg < pi->ipi_nsegs; seg++) {
+ tbd->flags_type = htole16(flags_type);
+ pi->ipi_new_pidx = RING_NEXT(txr, pi->ipi_new_pidx);
+ tbd = &((struct tx_bd_long *)txr->vaddr)[pi->ipi_new_pidx];
+ tbd->len = htole16(pi->ipi_segs[seg].ds_len);
+ tbd->addr = htole64(pi->ipi_segs[seg].ds_addr);
+ flags_type = TX_BD_SHORT_TYPE_TX_BD_SHORT;
+ }
+ flags_type |= TX_BD_SHORT_FLAGS_PACKET_END;
+ tbd->flags_type = htole16(flags_type);
+ pi->ipi_new_pidx = RING_NEXT(txr, pi->ipi_new_pidx);
+
+ return 0;
+}
+
+static void
+bnxt_isc_txd_flush(void *sc, uint16_t txqid, uint32_t pidx)
+{
+ struct bnxt_softc *softc = (struct bnxt_softc *)sc;
+ struct bnxt_ring *tx_ring = &softc->tx_rings[txqid];
+
+ /* pidx is what we last set ipi_new_pidx to */
+ BNXT_TX_DB(tx_ring, pidx);
+ /* TODO: Cumulus+ doesn't need the double doorbell */
+ BNXT_TX_DB(tx_ring, pidx);
+ return;
+}
+
+static int
+bnxt_isc_txd_credits_update(void *sc, uint16_t txqid, uint32_t idx, bool clear)
+{
+ struct bnxt_softc *softc = (struct bnxt_softc *)sc;
+ struct bnxt_cp_ring *cpr = &softc->tx_cp_rings[txqid];
+ struct tx_cmpl *cmpl = (struct tx_cmpl *)cpr->ring.vaddr;
+ int avail = 0;
+ uint32_t cons = cpr->cons;
+ bool v_bit = cpr->v_bit;
+ bool last_v_bit;
+ uint32_t last_cons;
+ uint16_t type;
+ uint16_t err;
+
+ for (;;) {
+ last_cons = cons;
+ last_v_bit = v_bit;
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ CMPL_PREFETCH_NEXT(cpr, cons);
+
+ if (!CMP_VALID(&cmpl[cons], v_bit))
+ goto done;
+
+ type = cmpl[cons].flags_type & TX_CMPL_TYPE_MASK;
+ switch (type) {
+ case TX_CMPL_TYPE_TX_L2:
+ err = (le16toh(cmpl[cons].errors_v) &
+ TX_CMPL_ERRORS_BUFFER_ERROR_MASK) >>
+ TX_CMPL_ERRORS_BUFFER_ERROR_SFT;
+ if (err)
+ device_printf(softc->dev,
+ "TX completion error %u\n", err);
+ /* No need to byte-swap the opaque value */
+ avail += cmpl[cons].opaque >> 24;
+ /*
+ * If we're not clearing, iflib only cares if there's
+ * at least one buffer. Don't scan the whole ring in
+ * this case.
+ */
+ if (!clear)
+ goto done;
+ break;
+ default:
+ if (type & 1) {
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ if (!CMP_VALID(&cmpl[cons], v_bit))
+ goto done;
+ }
+ device_printf(softc->dev,
+ "Unhandled TX completion type %u\n", type);
+ break;
+ }
+ }
+done:
+
+ if (clear && avail) {
+ cpr->cons = last_cons;
+ cpr->v_bit = last_v_bit;
+ BNXT_CP_IDX_DISABLE_DB(&cpr->ring, cpr->cons);
+ }
+
+ return avail;
+}
+
+static void
+bnxt_isc_rxd_refill(void *sc, uint16_t rxqid, uint8_t flid,
+ uint32_t pidx, uint64_t *paddrs,
+ caddr_t *vaddrs, uint16_t count, uint16_t len)
+{
+ struct bnxt_softc *softc = (struct bnxt_softc *)sc;
+ struct bnxt_ring *rx_ring;
+ struct rx_prod_pkt_bd *rxbd;
+ uint16_t type;
+ uint16_t i;
+
+ if (flid == 0) {
+ rx_ring = &softc->rx_rings[rxqid];
+ type = RX_PROD_PKT_BD_TYPE_RX_PROD_PKT;
+ }
+ else {
+ rx_ring = &softc->ag_rings[rxqid];
+ type = RX_PROD_AGG_BD_TYPE_RX_PROD_AGG;
+ }
+ rxbd = (void *)rx_ring->vaddr;
+
+ for (i=0; i<count; i++) {
+ rxbd[pidx].flags_type = htole16(type);
+ rxbd[pidx].len = htole16(len);
+ /* No need to byte-swap the opaque value */
+ rxbd[pidx].opaque = ((rxqid & 0xff) << 24) | (flid << 16)
+ | pidx;
+ rxbd[pidx].addr = htole64(paddrs[i]);
+ if (++pidx == rx_ring->ring_size)
+ pidx = 0;
+ }
+ return;
+}
+
+static void
+bnxt_isc_rxd_flush(void *sc, uint16_t rxqid, uint8_t flid,
+ uint32_t pidx)
+{
+ struct bnxt_softc *softc = (struct bnxt_softc *)sc;
+ struct bnxt_ring *rx_ring;
+
+ if (flid == 0)
+ rx_ring = &softc->rx_rings[rxqid];
+ else
+ rx_ring = &softc->ag_rings[rxqid];
+
+ /*
+ * We *must* update the completion ring before updating the RX ring
+ * or we will overrun the completion ring and the device will wedge for
+ * RX.
+ */
+ if (softc->rx_cp_rings[rxqid].cons != UINT32_MAX)
+ BNXT_CP_IDX_DISABLE_DB(&softc->rx_cp_rings[rxqid].ring,
+ softc->rx_cp_rings[rxqid].cons);
+ /* We're given the last filled RX buffer here, not the next empty one */
+ BNXT_RX_DB(rx_ring, RING_NEXT(rx_ring, pidx));
+ /* TODO: Cumulus+ doesn't need the double doorbell */
+ BNXT_RX_DB(rx_ring, RING_NEXT(rx_ring, pidx));
+ return;
+}
+
+static int
+bnxt_isc_rxd_available(void *sc, uint16_t rxqid, uint32_t idx, int budget)
+{
+ struct bnxt_softc *softc = (struct bnxt_softc *)sc;
+ struct bnxt_cp_ring *cpr = &softc->rx_cp_rings[rxqid];
+ struct rx_pkt_cmpl *rcp;
+ struct rx_tpa_start_cmpl *rtpa;
+ struct rx_tpa_end_cmpl *rtpae;
+ struct cmpl_base *cmp = (struct cmpl_base *)cpr->ring.vaddr;
+ int avail = 0;
+ uint32_t cons = cpr->cons;
+ bool v_bit = cpr->v_bit;
+ uint8_t ags;
+ int i;
+ uint16_t type;
+ uint8_t agg_id;
+
+ for (;;) {
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ CMPL_PREFETCH_NEXT(cpr, cons);
+
+ if (!CMP_VALID(&cmp[cons], v_bit))
+ goto cmpl_invalid;
+
+ type = le16toh(cmp[cons].type) & CMPL_BASE_TYPE_MASK;
+ switch (type) {
+ case CMPL_BASE_TYPE_RX_L2:
+ rcp = (void *)&cmp[cons];
+ ags = (rcp->agg_bufs_v1 & RX_PKT_CMPL_AGG_BUFS_MASK) >>
+ RX_PKT_CMPL_AGG_BUFS_SFT;
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ CMPL_PREFETCH_NEXT(cpr, cons);
+
+ if (!CMP_VALID(&cmp[cons], v_bit))
+ goto cmpl_invalid;
+
+ /* Now account for all the AG completions */
+ for (i=0; i<ags; i++) {
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ CMPL_PREFETCH_NEXT(cpr, cons);
+ if (!CMP_VALID(&cmp[cons], v_bit))
+ goto cmpl_invalid;
+ }
+ avail++;
+ break;
+ case CMPL_BASE_TYPE_RX_TPA_END:
+ rtpae = (void *)&cmp[cons];
+ ags = (rtpae->agg_bufs_v1 &
+ RX_TPA_END_CMPL_AGG_BUFS_MASK) >>
+ RX_TPA_END_CMPL_AGG_BUFS_SFT;
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ CMPL_PREFETCH_NEXT(cpr, cons);
+
+ if (!CMP_VALID(&cmp[cons], v_bit))
+ goto cmpl_invalid;
+ /* Now account for all the AG completions */
+ for (i=0; i<ags; i++) {
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ CMPL_PREFETCH_NEXT(cpr, cons);
+ if (!CMP_VALID(&cmp[cons], v_bit))
+ goto cmpl_invalid;
+ }
+ avail++;
+ break;
+ case CMPL_BASE_TYPE_RX_TPA_START:
+ rtpa = (void *)&cmp[cons];
+ agg_id = (rtpa->agg_id &
+ RX_TPA_START_CMPL_AGG_ID_MASK) >>
+ RX_TPA_START_CMPL_AGG_ID_SFT;
+ softc->tpa_start[agg_id].low = *rtpa;
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ CMPL_PREFETCH_NEXT(cpr, cons);
+
+ if (!CMP_VALID(&cmp[cons], v_bit))
+ goto cmpl_invalid;
+ softc->tpa_start[agg_id].high =
+ ((struct rx_tpa_start_cmpl_hi *)cmp)[cons];
+ break;
+ case CMPL_BASE_TYPE_RX_AGG:
+ break;
+ default:
+ device_printf(softc->dev,
+ "Unhandled completion type %d on RXQ %d\n",
+ type, rxqid);
+
+ /* Odd completion types use two completions */
+ if (type & 1) {
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ CMPL_PREFETCH_NEXT(cpr, cons);
+
+ if (!CMP_VALID(&cmp[cons], v_bit))
+ goto cmpl_invalid;
+ }
+ break;
+ }
+ if (avail > budget)
+ break;
+ }
+cmpl_invalid:
+
+ return avail;
+}
+
+static int
+bnxt_pkt_get_l2(struct bnxt_softc *softc, if_rxd_info_t ri,
+ struct bnxt_cp_ring *cpr, uint16_t flags_type)
+{
+ struct rx_pkt_cmpl *rcp;
+ struct rx_pkt_cmpl_hi *rcph;
+ struct rx_abuf_cmpl *acp;
+ uint32_t flags2;
+ uint32_t errors;
+ uint8_t ags;
+ int i;
+
+ rcp = &((struct rx_pkt_cmpl *)cpr->ring.vaddr)[cpr->cons];
+
+ /* Extract from the first 16-byte BD */
+ if (flags_type & RX_PKT_CMPL_FLAGS_RSS_VALID) {
+ ri->iri_flowid = le32toh(rcp->rss_hash);
+ /*
+ * TODO: Extract something useful from rcp->rss_hash_type
+ * (undocumented)
+ */
+ // May be documented in the "LSI ES"
+ // also check the firmware code.
+ ri->iri_rsstype = M_HASHTYPE_OPAQUE;
+ }
+ else {
+ ri->iri_rsstype = M_HASHTYPE_NONE;
+ }
+ ags = (rcp->agg_bufs_v1 & RX_PKT_CMPL_AGG_BUFS_MASK) >>
+ RX_PKT_CMPL_AGG_BUFS_SFT;
+ ri->iri_nfrags = ags + 1;
+ /* No need to byte-swap the opaque value */
+ ri->iri_frags[0].irf_flid = (rcp->opaque >> 16) & 0xff;
+ ri->iri_frags[0].irf_idx = rcp->opaque & 0xffff;
+ ri->iri_frags[0].irf_len = le16toh(rcp->len);
+ ri->iri_len = le16toh(rcp->len);
+
+ /* Now the second 16-byte BD */
+ NEXT_CP_CONS_V(&cpr->ring, cpr->cons, cpr->v_bit);
+ ri->iri_cidx = RING_NEXT(&cpr->ring, ri->iri_cidx);
+ rcph = &((struct rx_pkt_cmpl_hi *)cpr->ring.vaddr)[cpr->cons];
+
+ flags2 = le32toh(rcph->flags2);
+ errors = le16toh(rcph->errors_v2);
+ if ((flags2 & RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK) ==
+ RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN) {
+ ri->iri_flags |= M_VLANTAG;
+ /* TODO: Should this be the entire 16-bits? */
+ ri->iri_vtag = le32toh(rcph->metadata) &
+ (RX_PKT_CMPL_METADATA_VID_MASK | RX_PKT_CMPL_METADATA_DE |
+ RX_PKT_CMPL_METADATA_PRI_MASK);
+ }
+ if (flags2 & RX_PKT_CMPL_FLAGS2_IP_CS_CALC) {
+ ri->iri_csum_flags |= CSUM_IP_CHECKED;
+ if (!(errors & RX_PKT_CMPL_ERRORS_IP_CS_ERROR))
+ ri->iri_csum_flags |= CSUM_IP_VALID;
+ }
+ if (flags2 & RX_PKT_CMPL_FLAGS2_L4_CS_CALC) {
+ ri->iri_csum_flags |= CSUM_L4_CALC;
+ if (!(errors & RX_PKT_CMPL_ERRORS_L4_CS_ERROR)) {
+ ri->iri_csum_flags |= CSUM_L4_VALID;
+ ri->iri_csum_data = 0xffff;
+ }
+ }
+
+ /* And finally the ag ring stuff. */
+ for (i=1; i < ri->iri_nfrags; i++) {
+ NEXT_CP_CONS_V(&cpr->ring, cpr->cons, cpr->v_bit);
+ ri->iri_cidx = RING_NEXT(&cpr->ring, ri->iri_cidx);
+ acp = &((struct rx_abuf_cmpl *)cpr->ring.vaddr)[cpr->cons];
+
+ /* No need to byte-swap the opaque value */
+ ri->iri_frags[i].irf_flid = (acp->opaque >> 16 & 0xff);
+ ri->iri_frags[i].irf_idx = acp->opaque & 0xffff;
+ ri->iri_frags[i].irf_len = le16toh(acp->len);
+ ri->iri_len += le16toh(acp->len);
+ }
+
+ return 0;
+}
+
+static int
+bnxt_pkt_get_tpa(struct bnxt_softc *softc, if_rxd_info_t ri,
+ struct bnxt_cp_ring *cpr, uint16_t flags_type)
+{
+ struct rx_tpa_end_cmpl *agend =
+ &((struct rx_tpa_end_cmpl *)cpr->ring.vaddr)[cpr->cons];
+ struct rx_tpa_end_cmpl_hi *agendh;
+ struct rx_abuf_cmpl *acp;
+ struct bnxt_full_tpa_start *tpas;
+ uint32_t flags2;
+ uint8_t ags;
+ uint8_t agg_id;
+ int i;
+
+ /* Get the agg_id */
+ agg_id = (agend->agg_id & RX_TPA_END_CMPL_AGG_ID_MASK) >>
+ RX_TPA_END_CMPL_AGG_ID_SFT;
+ tpas = &softc->tpa_start[agg_id];
+
+ /* Extract from the first 16-byte BD */
+ if (le16toh(tpas->low.flags_type) & RX_TPA_START_CMPL_FLAGS_RSS_VALID) {
+ ri->iri_flowid = le32toh(tpas->low.rss_hash);
+ /*
+ * TODO: Extract something useful from tpas->low.rss_hash_type
+ * (undocumented)
+ */
+ // May be documented in the "LSI ES"
+ // also check the firmware code.
+ ri->iri_rsstype = M_HASHTYPE_OPAQUE;
+ }
+ else {
+ ri->iri_rsstype = M_HASHTYPE_NONE;
+ }
+ ags = (agend->agg_bufs_v1 & RX_TPA_END_CMPL_AGG_BUFS_MASK) >>
+ RX_TPA_END_CMPL_AGG_BUFS_SFT;
+ ri->iri_nfrags = ags + 1;
+ /* No need to byte-swap the opaque value */
+ ri->iri_frags[0].irf_flid = (tpas->low.opaque >> 16) & 0xff;
+ ri->iri_frags[0].irf_idx = tpas->low.opaque & 0xffff;
+ ri->iri_frags[0].irf_len = le16toh(tpas->low.len);
+ ri->iri_len = le16toh(tpas->low.len);
+
+ /* Now the second 16-byte BD */
+ NEXT_CP_CONS_V(&cpr->ring, cpr->cons, cpr->v_bit);
+ ri->iri_cidx = RING_NEXT(&cpr->ring, ri->iri_cidx);
+ agendh = &((struct rx_tpa_end_cmpl_hi *)cpr->ring.vaddr)[cpr->cons];
+
+ flags2 = le32toh(tpas->high.flags2);
+ if ((flags2 & RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK) ==
+ RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN) {
+ ri->iri_flags |= M_VLANTAG;
+ /* TODO: Should this be the entire 16-bits? */
+ ri->iri_vtag = le32toh(tpas->high.metadata) &
+ (RX_TPA_START_CMPL_METADATA_VID_MASK |
+ RX_TPA_START_CMPL_METADATA_DE |
+ RX_TPA_START_CMPL_METADATA_PRI_MASK);
+ }
+ if (flags2 & RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC) {
+ ri->iri_csum_flags |= CSUM_IP_CHECKED;
+ ri->iri_csum_flags |= CSUM_IP_VALID;
+ }
+ if (flags2 & RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC) {
+ ri->iri_csum_flags |= CSUM_L4_CALC;
+ ri->iri_csum_flags |= CSUM_L4_VALID;
+ ri->iri_csum_data = 0xffff;
+ }
+
+ /* Now the ag ring stuff. */
+ for (i=1; i < ri->iri_nfrags; i++) {
+ NEXT_CP_CONS_V(&cpr->ring, cpr->cons, cpr->v_bit);
+ ri->iri_cidx = RING_NEXT(&cpr->ring, ri->iri_cidx);
+ acp = &((struct rx_abuf_cmpl *)cpr->ring.vaddr)[cpr->cons];
+
+ /* No need to byte-swap the opaque value */
+ ri->iri_frags[i].irf_flid = (acp->opaque >> 16) & 0xff;
+ ri->iri_frags[i].irf_idx = acp->opaque & 0xffff;
+ ri->iri_frags[i].irf_len = le16toh(acp->len);
+ ri->iri_len += le16toh(acp->len);
+ }
+
+ /* And finally, the empty BD at the end... */
+ ri->iri_nfrags++;
+ /* No need to byte-swap the opaque value */
+ ri->iri_frags[i].irf_flid = (agend->opaque >> 16) % 0xff;
+ ri->iri_frags[i].irf_idx = agend->opaque & 0xffff;
+ ri->iri_frags[i].irf_len = le16toh(agend->len);
+ ri->iri_len += le16toh(agend->len);
+
+ return 0;
+}
+
+/* If we return anything but zero, iflib will assert... */
+static int
+bnxt_isc_rxd_pkt_get(void *sc, if_rxd_info_t ri)
+{
+ struct bnxt_softc *softc = (struct bnxt_softc *)sc;
+ struct bnxt_cp_ring *cpr = &softc->rx_cp_rings[ri->iri_qsidx];
+ struct cmpl_base *cmp;
+ uint16_t flags_type;
+ uint16_t type;
+
+ for (;;) {
+ NEXT_CP_CONS_V(&cpr->ring, cpr->cons, cpr->v_bit);
+ ri->iri_cidx = RING_NEXT(&cpr->ring, ri->iri_cidx);
+ CMPL_PREFETCH_NEXT(cpr, cpr->cons);
+ cmp = &((struct cmpl_base *)cpr->ring.vaddr)[cpr->cons];
+
+ flags_type = le16toh(cmp->type);
+ type = flags_type & CMPL_BASE_TYPE_MASK;
+
+ switch (type) {
+ case CMPL_BASE_TYPE_RX_L2:
+ return bnxt_pkt_get_l2(softc, ri, cpr, flags_type);
+ case CMPL_BASE_TYPE_RX_TPA_END:
+ return bnxt_pkt_get_tpa(softc, ri, cpr, flags_type);
+ case CMPL_BASE_TYPE_RX_TPA_START:
+ NEXT_CP_CONS_V(&cpr->ring, cpr->cons, cpr->v_bit);
+ ri->iri_cidx = RING_NEXT(&cpr->ring, ri->iri_cidx);
+ CMPL_PREFETCH_NEXT(cpr, cpr->cons);
+ break;
+ default:
+ device_printf(softc->dev,
+ "Unhandled completion type %d on RXQ %d get\n",
+ type, ri->iri_qsidx);
+ if (type & 1) {
+ NEXT_CP_CONS_V(&cpr->ring, cpr->cons,
+ cpr->v_bit);
+ ri->iri_cidx = RING_NEXT(&cpr->ring,
+ ri->iri_cidx);
+ CMPL_PREFETCH_NEXT(cpr, cpr->cons);
+ }
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int
+bnxt_intr(void *sc)
+{
+ struct bnxt_softc *softc = (struct bnxt_softc *)sc;
+
+ device_printf(softc->dev, "STUB: %s @ %s:%d\n", __func__, __FILE__, __LINE__);
+ return ENOSYS;
+}
Index: sys/dev/bnxt/convert_hsi.pl
===================================================================
--- /dev/null
+++ sys/dev/bnxt/convert_hsi.pl
@@ -0,0 +1,353 @@
+#!/usr/bin/env perl
+
+my $do_decode = 0;
+
+if (! -f $ARGV[0]) {
+ print "Input file not specified (should be path to hsi_struct_defs.h)\n";
+ exit 1;
+}
+
+if (!open(IN, "<", $ARGV[0])) {
+ print "Failure to open input file\n";
+ exit 1;
+}
+
+if (!open(OUT, ">", "hsi_struct_def.h")) {
+ print "Failure to open output file\n";
+ exit 1;
+}
+
+$/=undef;
+my $header = <IN>;
+close IN;
+
+print OUT <<END_OF_NOTICE;
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014-2015 Broadcom Corporation.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+END_OF_NOTICE
+
+# Convert line endings
+$header =~ s/\r\n/\n/gs;
+
+# Convert arrays of two u32_t to a single uint64_t
+$header =~ s/\bu32_t(\s+[a-zA-Z0-9_]+)\[2\]/uint64_t$1/gs;
+
+# Convert uint32_t *_lo/uint32_t *_hi to a single uint64_t
+$header =~ s/\bu32_t(\s+[a-zA-Z0-9_]+)_lo;\s*\r?\n\s*u32_t(\s+[a-zA-Z0-9_]+)_hi/uint64_t$1/gs;
+
+# Convert types
+$header =~ s/\bu([0-9]+)_t\b/uint$1_t/gs;
+
+# Convert literals
+$header =~ s/\b((?:0x)?[0-9a-f]+)UL/UINT32_C($1)/gs;
+
+# Strip comments
+#$header =~ s/^(\s*[^\/\s][^\/]+?)\s*\/\*.*?\*\/\s*?$/$1/gm;
+#$header =~ s/[ \t]*\/\*.*?\*\/\s*?\n?//gs;
+
+# Pack structs
+#$header =~ s/}(\s+)([^\s]+_t[,;])/} __attribute__((packed))$1$2/gs;
+
+# Normalize indent
+$header =~ s/( ) +(#define)/$1$2/gs;
+$header =~ s/^(}[^\n]*;)\n([^\n])/$1\n\n$2/gsm;
+$header =~ s/([^\n])\n(typedef)/$1\n\n$2/gs;
+$header =~ s/ /\t/g;
+$header =~ s/ /\t/g;
+$header =~ s/([^\s]\t+) +/$1/g;
+
+# Remove typedefs and pack structs
+$header =~ s/^typedef struct (.*?)\n{\n(.*?)}[^\n]*;/struct $1 {\n$2} __attribute__((packed));/gsm;
+
+print OUT $header;
+close OUT;
+
+if ($do_decode) {
+ if(!open(OUT, ">", "hsi_struct_decode.c")) {
+ print "Failure to open decoder output file\n";
+ exit 1;
+ }
+
+ print OUT <<END_OF_NOTICE;
+ /*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014-2015 Broadcom Corporation.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+END_OF_NOTICE
+
+ if(!open(HDR, ">", "hsi_struct_decode.h")) {
+ print "Failure to open decoder output header file\n";
+ exit 1;
+ }
+
+ print HDR <<END_OF_NOTICE;
+ /*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014-2015 Broadcom Corporation.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+END_OF_NOTICE
+
+ print OUT "#ifdef HSI_DEBUG\n#include <inttypes.h>\n#include <rte_common.h>\n#include <rte_log.h>\n#include \"hsi_struct_def_dpdk.h\"\n#include \"hsi_struct_decode.h\"\n#include \"hsi_struct_decode.h\"\n\n";
+ print HDR "#ifdef HSI_DEBUG\n#include \"hsi_struct_def_dpdk.h\"\n\n";
+
+ my $hdr_defs = '';
+
+ sub print_single_val
+ {
+ my $field=shift;
+ my $type=shift;
+ my $max_field_len=shift;
+ my $name = shift;
+ my $macroshash = shift;
+ my %macros = %$macroshash;
+ $macrosref = shift;
+ my @macros = @$macrosref;
+ $macrosref = shift;
+ my @fields = @$macrosref;
+
+ if ($type eq 'uint32_t') {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s = 0x%%08\"PRIX32\"\\n\", data->$field);\n",$max_field_len,$field;
+ }
+ elsif ($type eq 'uint16_t') {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s = 0x%%04\"PRIX16\"\\n\", data->$field);\n",$max_field_len,$field;
+ }
+ elsif ($type eq 'uint8_t') {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s = 0x%%02\"PRIX8\"\\n\", data->$field);\n",$max_field_len,$field;
+ }
+ elsif ($type eq 'uint64_t') {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s = 0x%%016\"PRIX64\"\\n\", data->$field);\n",$max_field_len,$field;
+ }
+ elsif ($type eq 'char') {
+ if ($field =~ s/\[([0-9]+)\]//) {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s = \\\"%%.$1s\\\"\\n\", data->$field);\n",$max_field_len,$field;
+ }
+ else {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s = 0x%%02\"PRIX8\"\\n\", data->$field);\n",$max_field_len,$field;
+ }
+ }
+ else {
+ print "Unhandled type: '$type'\n";
+ }
+
+ my $macro_prefix = uc($name).'_'.uc($field).'_';
+ # Special handling for the common flags_type field
+ $macro_prefix =~ s/FLAGS_TYPE_$/FLAGS_/ if ($field eq 'flags_type');
+ # Special handling for _hi types
+ $macro_prefix =~ s/_HI_/_/ if ($name =~ /_hi$/);
+
+ $macro_prefix =~ s/\[[0-9]+\]//;
+ my %vmacros;
+ my $vmacros_have_mask = 0;
+ my @vmacros;
+ my %subfields;
+ my $all_single_bits=1;
+ MACRO:
+ foreach my $macro (@macros) {
+ if ($macro =~ /^$macro_prefix(.*)_MASK$/) {
+ my $macro = $&;
+ my $maskdef = $macros{$macro};
+ my $subfield = $1;
+ my $subfield_value = "(data->$field & $macro)";
+ if (defined $macros{"$macro_prefix$subfield\_SFT"}) {
+ $subfield_value = "($subfield_value >> $macro_prefix$subfield\_SFT)";
+ }
+ $maskdef =~ s/[x0 ]//g;
+ if ($type eq 'uint64_t') {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s $subfield = %%0*\" PRIX64 \"\\n\", %u, $subfield_value);\n", $max_field_len, '', length($maskdef);
+ }
+ else {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s $subfield = %%0*X\\n\", %u, $subfield_value);\n", $max_field_len, '', length($maskdef);
+ }
+ delete $$macroshash{$macro};
+ }
+ elsif ($macro =~ /^$macro_prefix(.*)_SFT$/) {
+ delete $$macroshash{$macro};
+ }
+ elsif ($macro =~ /^$macro_prefix\MASK$/) {
+ $vmacros_have_mask = 1;
+ delete $$macroshash{$macro};
+ }
+ elsif ($macro =~ /^$macro_prefix(.*)$/) {
+ my $macro = $&;
+ my $subfield = $1;
+
+ # Check for longer fields with the same base... ie: link and link_speed
+ foreach my $extra_field (@fields) {
+ next if ($extra_field eq $field);
+ if ($extra_field =~ /^$field/) {
+ my $extra_prefix = uc($name).'_'.uc($extra_field).'_';
+ next MACRO if ($macro =~ /^$extra_prefix/);
+ }
+ }
+
+ push @vmacros, $macro;
+ my $macroeval = $macros{$macro};
+ $macroeval =~ s/UINT32_C\((.*?)\)/$1/g;
+ $vmacros{$macro} = eval("$macroeval");
+ $subfields{$macro} = $subfield;
+
+ $all_single_bits = 0 if ($vmacros{$macro} & ($vmacros{$macro}-1));
+ $all_single_bits = 0 if ($vmacros{$macro} == 0);
+ }
+ }
+ if ($all_single_bits) {
+ foreach my $macro (@vmacros) {
+ my $subfield_value = "(data->$field & $macro)";
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s $subfields{$macro} : %%s\\n\", $subfield_value?\"ON\":\"OFF\");\n", $max_field_len, '';
+ delete $$macroshash{$macro};
+ }
+ }
+ else {
+ printf OUT "\tRTE_LOG(DEBUG, PMD, \" % *s Value : %%s\\n\",\n", $max_field_len, '';
+ foreach my $macro (@vmacros) {
+ my $subfield_value = "data->$field";
+ $subfield_value = "($subfield_value & $macro_prefix\MASK)" if $vmacros_have_mask;
+ print OUT "\t\t$subfield_value == $macro ? \"$subfields{$macro}\" :\n";
+ delete $$macroshash{$macro};
+ }
+ print OUT "\t\t\"Unknown\");\n";
+ }
+ }
+
+ while ($header =~ /^typedef\s+struct\s+(.*?)\s+{(.*?)^}/msg) {
+ my ($name,$def) = ($1, $2);
+ my @fields=();
+ my %type=();
+ my @macros=();
+ my %macros=();
+ my $max_field_len=0;
+
+ # First, pull out all the fields in order...
+ while($def =~ /^\s*([^\s#\/]+?)\s+([^;\/\s]+?)\s*;/mg) {
+ my ($type, $name) = ($1, $2);
+ push @fields, $name;
+ $type{$name}=$type;
+ $max_field_len = length($name) if length($name) > $max_field_len;
+ }
+ # Now, pull out the macros...
+ while($def =~ /^\s*\#define\s+([^\s]+?)\s+(.*?)\s*$/mg) {
+ push @macros, $1;
+ $macros{$1}=$2;
+ }
+
+ # Now, generate code to print the struct...
+ print OUT "void decode_$name(const char *string __rte_unused, struct $name *data) {\n\tRTE_LOG(DEBUG, PMD, \"$name\\n\");\n";
+ print HDR "void decode_$name(const char *string __rte_unused, struct $name *data);\n";
+ $hdr_defs .= "#define decode_$name(x, y) {}\n";
+ foreach my $field (@fields) {
+ if ($field =~ /\[([0-9]+)\]/) {
+ if ($type{$field} eq 'char') {
+ print_single_val($field, $type{$field}, $max_field_len, $name, \%macros, \@macros, \@fields);
+ }
+ else {
+ foreach my $idx (0..$1-1) {
+ my $item = $field;
+ $item =~ s/\[[0-9]+\]/[$idx]/;
+ print_single_val($item, $type{$field}, $max_field_len, $name, \%macros, \@macros, \@fields);
+ }
+ }
+ }
+ else {
+ print_single_val($field, $type{$field}, $max_field_len, $name, \%macros, \@macros, \@fields);
+ }
+ }
+ # print "Unhandled macros:\n",join("\n", keys %macros),"\n" if (keys %macros > 0);
+ print OUT "}\n\n";
+ }
+ print OUT "#endif\n";
+
+ print HDR "#else\n";
+ print HDR $hdr_defs;
+ print HDR "#endif\n";
+ close OUT;
+ close HDR;
+}
Index: sys/dev/bnxt/hsi_struct_def.h
===================================================================
--- /dev/null
+++ sys/dev/bnxt/hsi_struct_def.h
@@ -0,0 +1,17585 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014-2015 Broadcom Corporation.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/****************************************************************************
+ * Copyright(c) 2001-2016 Broadcom Corporation, all rights reserved
+ * Proprietary and Confidential Information.
+ *
+ * This source file is the property of Broadcom Corporation, and
+ * may not be copied or distributed in any isomorphic form without
+ * the prior written consent of Broadcom Corporation.
+ *
+ * Name: hsi_struct_def_external.h
+ *
+ * Description: Definition of HSI data structures
+ *
+ * Date: 07/26/16 21:30:37
+ *
+ * Note: This file is scripted generated by hsi_decode.py.
+ * DO NOT modify this file manually !!!!
+ *
+ ****************************************************************************/
+#ifndef _HSI_STRUCT_DEF_EXTERNAL_H_
+#define _HSI_STRUCT_DEF_EXTERNAL_H_
+
+/*
+ * per-context HW statistics -- chip view
+ * Reference to stat_ctx_stat_xxx for
+ */
+
+struct ctx_hw_stats {
+ uint64_t rx_ucast_pkts;
+ uint64_t rx_mcast_pkts;
+ uint64_t rx_bcast_pkts;
+ uint64_t rx_discard_pkts;
+ uint64_t rx_drop_pkts;
+ uint64_t rx_ucast_bytes;
+ uint64_t rx_mcast_bytes;
+ uint64_t rx_bcast_bytes;
+ uint64_t tx_ucast_pkts;
+ uint64_t tx_mcast_pkts;
+ uint64_t tx_bcast_pkts;
+ uint64_t tx_discard_pkts;
+ uint64_t tx_drop_pkts;
+ uint64_t tx_ucast_bytes;
+ uint64_t tx_mcast_bytes;
+ uint64_t tx_bcast_bytes;
+ uint64_t tpa_pkts;
+ uint64_t tpa_bytes;
+ uint64_t tpa_events;
+ uint64_t tpa_aborts;
+} __attribute__((packed));
+
+/* BD Ring Structures */
+/*
+ * Description: This structure is used to inform the NIC of a location for and
+ * an aggregation buffer that will be used for packet data that is received. An
+ * aggregation buffer creates a different kind of completion operation for a
+ * packet where a variable number of BDs may be used to place the packet in the
+ * host. RX Rings that have aggregation buffers are known as aggregation rings
+ * and must contain only aggregation buffers.
+ */
+/*
+ * Note: BD Ring structures are written by the driver to TX Rings and RX Rings
+ * to indicate to the chip there is more buffer space in the host that needs to
+ * be transmitted or is available for receive data.
+ */
+/* BD Base (8 bytes) */
+
+struct bd_base {
+ uint8_t type;
+ /* This value identifies the type of buffer descriptor. */
+ #define BD_BASE_TYPE_MASK UINT32_C(0x3f)
+ #define BD_BASE_TYPE_SFT 0
+ /*
+ * Indicates that this BD is 16B long and is used for normal L2
+ * packet transmission.
+ */
+ #define BD_BASE_TYPE_TX_BD_SHORT UINT32_C(0x0)
+ /*
+ * Indicates that this BD is 1BB long and is an empty TX BD. Not
+ * valid for use by the driver.
+ */
+ #define BD_BASE_TYPE_TX_BD_EMPTY UINT32_C(0x1)
+ /*
+ * Indicates that this BD is 16B long and is an RX Producer (ie.
+ * empty) buffer descriptor.
+ */
+ #define BD_BASE_TYPE_RX_PROD_PKT UINT32_C(0x4)
+ /*
+ * Indicates that this BD is 16B long and is an RX Producer
+ * Buffer BD.
+ */
+ #define BD_BASE_TYPE_RX_PROD_BFR UINT32_C(0x5)
+ /*
+ * Indicates that this BD is 16B long and is an RX Producer
+ * Assembly Buffer Descriptor.
+ */
+ #define BD_BASE_TYPE_RX_PROD_AGG UINT32_C(0x6)
+ /*
+ * Indicates that this BD is 32B long and is used for normal L2
+ * packet transmission.
+ */
+ #define BD_BASE_TYPE_TX_BD_LONG UINT32_C(0x10)
+ uint8_t unused_1[7];
+} __attribute__((packed));
+
+/* Short TX BD (16 bytes) */
+
+struct tx_bd_short {
+ uint16_t flags_type;
+ /*
+ * All bits in this field must be valid on the first BD of a packet.
+ * Only the packet_end bit must be valid for the remaining BDs of a
+ * packet.
+ */
+ /* This value identifies the type of buffer descriptor. */
+ #define TX_BD_SHORT_TYPE_MASK UINT32_C(0x3f)
+ #define TX_BD_SHORT_TYPE_SFT 0
+ /*
+ * Indicates that this BD is 16B long and is used for normal L2
+ * packet transmission.
+ */
+ #define TX_BD_SHORT_TYPE_TX_BD_SHORT UINT32_C(0x0)
+ /*
+ * If set to 1, the packet ends with the data in the buffer pointed to
+ * by this descriptor. This flag must be valid on every BD.
+ */
+ #define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40)
+ /*
+ * If set to 1, the device will not generate a completion for this
+ * transmit packet unless there is an error in it's processing. If this
+ * bit is set to 0, then the packet will be completed normally. This bit
+ * must be valid only on the first BD of a packet.
+ */
+ #define TX_BD_SHORT_FLAGS_NO_CMPL UINT32_C(0x80)
+ /*
+ * This value indicates how many 16B BD locations are consumed in the
+ * ring by this packet. A value of 1 indicates that this BD is the only
+ * BD (and that the it is a short BD). A value of 3 indicates either 3
+ * short BDs or 1 long BD and one short BD in the packet. A value of 0
+ * indicates that there are 32 BD locations in the packet (the maximum).
+ * This field is valid only on the first BD of a packet.
+ */
+ #define TX_BD_SHORT_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
+ #define TX_BD_SHORT_FLAGS_BD_CNT_SFT 8
+ /*
+ * This value is a hint for the length of the entire packet. It is used
+ * by the chip to optimize internal processing. The packet will be
+ * dropped if the hint is too short. This field is valid only on the
+ * first BD of a packet.
+ */
+ #define TX_BD_SHORT_FLAGS_LHINT_MASK UINT32_C(0x6000)
+ #define TX_BD_SHORT_FLAGS_LHINT_SFT 13
+ /* indicates packet length < 512B */
+ #define TX_BD_SHORT_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13)
+ /* indicates 512 <= packet length < 1KB */
+ #define TX_BD_SHORT_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13)
+ /* indicates 1KB <= packet length < 2KB */
+ #define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
+ /* indicates packet length >= 2KB */
+ #define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
+ #define TX_BD_SHORT_FLAGS_LHINT_LAST TX_BD_SHORT_FLAGS_LHINT_GTE2K
+ /*
+ * If set to 1, the device immediately updates the Send Consumer Index
+ * after the buffer associated with this descriptor has been transferred
+ * via DMA to NIC memory from host memory. An interrupt may or may not
+ * be generated according to the state of the interrupt avoidance
+ * mechanisms. If this bit is set to 0, then the Consumer Index is only
+ * updated as soon as one of the host interrupt coalescing conditions
+ * has been met. This bit must be valid on the first BD of a packet.
+ */
+ #define TX_BD_SHORT_FLAGS_COAL_NOW UINT32_C(0x8000)
+ /*
+ * All bits in this field must be valid on the first BD of a packet.
+ * Only the packet_end bit must be valid for the remaining BDs of a
+ * packet.
+ */
+ #define TX_BD_SHORT_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_BD_SHORT_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This is the length of the host physical buffer this BD describes in
+ * bytes. This field must be valid on all BDs of a packet.
+ */
+ uint32_t opaque;
+ /*
+ * The opaque data field is pass through to the completion and can be
+ * used for any data that the driver wants to associate with the
+ * transmit BD. This field must be valid on the first BD of a packet.
+ */
+ uint64_t addr;
+ /*
+ * This is the host physical address for the portion of the packet
+ * described by this TX BD. This value must be valid on all BDs of a
+ * packet.
+ */
+} __attribute__((packed));
+
+/* Long TX BD (32 bytes split to 2 16-byte struct) */
+
+struct tx_bd_long {
+ uint16_t flags_type;
+ /*
+ * All bits in this field must be valid on the first BD of a packet.
+ * Only the packet_end bit must be valid for the remaining BDs of a
+ * packet.
+ */
+ /* This value identifies the type of buffer descriptor. */
+ #define TX_BD_LONG_TYPE_MASK UINT32_C(0x3f)
+ #define TX_BD_LONG_TYPE_SFT 0
+ /*
+ * Indicates that this BD is 32B long and is used for normal L2
+ * packet transmission.
+ */
+ #define TX_BD_LONG_TYPE_TX_BD_LONG UINT32_C(0x10)
+ /*
+ * If set to 1, the packet ends with the data in the buffer pointed to
+ * by this descriptor. This flag must be valid on every BD.
+ */
+ #define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40)
+ /*
+ * If set to 1, the device will not generate a completion for this
+ * transmit packet unless there is an error in it's processing. If this
+ * bit is set to 0, then the packet will be completed normally. This bit
+ * must be valid only on the first BD of a packet.
+ */
+ #define TX_BD_LONG_FLAGS_NO_CMPL UINT32_C(0x80)
+ /*
+ * This value indicates how many 16B BD locations are consumed in the
+ * ring by this packet. A value of 1 indicates that this BD is the only
+ * BD (and that the it is a short BD). A value of 3 indicates either 3
+ * short BDs or 1 long BD and one short BD in the packet. A value of 0
+ * indicates that there are 32 BD locations in the packet (the maximum).
+ * This field is valid only on the first BD of a packet.
+ */
+ #define TX_BD_LONG_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
+ #define TX_BD_LONG_FLAGS_BD_CNT_SFT 8
+ /*
+ * This value is a hint for the length of the entire packet. It is used
+ * by the chip to optimize internal processing. The packet will be
+ * dropped if the hint is too short. This field is valid only on the
+ * first BD of a packet.
+ */
+ #define TX_BD_LONG_FLAGS_LHINT_MASK UINT32_C(0x6000)
+ #define TX_BD_LONG_FLAGS_LHINT_SFT 13
+ /* indicates packet length < 512B */
+ #define TX_BD_LONG_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13)
+ /* indicates 512 <= packet length < 1KB */
+ #define TX_BD_LONG_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13)
+ /* indicates 1KB <= packet length < 2KB */
+ #define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
+ /* indicates packet length >= 2KB */
+ #define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
+ #define TX_BD_LONG_FLAGS_LHINT_LAST TX_BD_LONG_FLAGS_LHINT_GTE2K
+ /*
+ * If set to 1, the device immediately updates the Send Consumer Index
+ * after the buffer associated with this descriptor has been transferred
+ * via DMA to NIC memory from host memory. An interrupt may or may not
+ * be generated according to the state of the interrupt avoidance
+ * mechanisms. If this bit is set to 0, then the Consumer Index is only
+ * updated as soon as one of the host interrupt coalescing conditions
+ * has been met. This bit must be valid on the first BD of a packet.
+ */
+ #define TX_BD_LONG_FLAGS_COAL_NOW UINT32_C(0x8000)
+ /*
+ * All bits in this field must be valid on the first BD of a packet.
+ * Only the packet_end bit must be valid for the remaining BDs of a
+ * packet.
+ */
+ #define TX_BD_LONG_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_BD_LONG_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This is the length of the host physical buffer this BD describes in
+ * bytes. This field must be valid on all BDs of a packet.
+ */
+ uint32_t opaque;
+ /*
+ * The opaque data field is pass through to the completion and can be
+ * used for any data that the driver wants to associate with the
+ * transmit BD. This field must be valid on the first BD of a packet.
+ */
+ uint64_t addr;
+ /*
+ * This is the host physical address for the portion of the packet
+ * described by this TX BD. This value must be valid on all BDs of a
+ * packet.
+ */
+} __attribute__((packed));
+
+/* last 16 bytes of Long TX BD */
+
+struct tx_bd_long_hi {
+ uint16_t lflags;
+ /*
+ * All bits in this field must be valid on the first BD of a packet.
+ * Their value on other BDs of the packet will be ignored.
+ */
+ /*
+ * If set to 1, the controller replaces the TCP/UPD checksum fields of
+ * normal TCP/UPD checksum, or the inner TCP/UDP checksum field of the
+ * encapsulated TCP/UDP packets with the hardware calculated TCP/UDP
+ * checksum for the packet associated with this descriptor. The flag is
+ * ignored if the LSO flag is set. This bit must be valid on the first
+ * BD of a packet.
+ */
+ #define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1)
+ /*
+ * If set to 1, the controller replaces the IP checksum of the normal
+ * packets, or the inner IP checksum of the encapsulated packets with
+ * the hardware calculated IP checksum for the packet associated with
+ * this descriptor. This bit must be valid on the first BD of a packet.
+ */
+ #define TX_BD_LONG_LFLAGS_IP_CHKSUM UINT32_C(0x2)
+ /*
+ * If set to 1, the controller will not append an Ethernet CRC to the
+ * end of the frame. This bit must be valid on the first BD of a packet.
+ * Packet must be 64B or longer when this flag is set. It is not useful
+ * to use this bit with any form of TX offload such as CSO or LSO. The
+ * intent is that the packet from the host already has a valid Ethernet
+ * CRC on the packet.
+ */
+ #define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4)
+ /*
+ * If set to 1, the device will record the time at which the packet was
+ * actually transmitted at the TX MAC. This bit must be valid on the
+ * first BD of a packet.
+ */
+ #define TX_BD_LONG_LFLAGS_STAMP UINT32_C(0x8)
+ /*
+ * If set to 1, The controller replaces the tunnel IP checksum field
+ * with hardware calculated IP checksum for the IP header of the packet
+ * associated with this descriptor. For outer UDP checksum, global outer
+ * UDP checksum TE_NIC register needs to be enabled. If the global outer
+ * UDP checksum TE_NIC register bit is set, outer UDP checksum will be
+ * calculated for the following cases: 1. Packets with tcp_udp_chksum
+ * flag set to offload checksum for inner packet AND the inner packet is
+ * TCP/UDP. If the inner packet is ICMP for example (non-TCP/UDP), even
+ * if the tcp_udp_chksum is set, the outer UDP checksum will not be
+ * calculated. 2. Packets with lso flag set which implies inner TCP
+ * checksum calculation as part of LSO operation.
+ */
+ #define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10)
+ /*
+ * If set to 1, the device will treat this packet with LSO(Large Send
+ * Offload) processing for both normal or encapsulated packets, which is
+ * a form of TCP segmentation. When this bit is 1, the hdr_size and mss
+ * fields must be valid. The driver doesn't need to set t_ip_chksum,
+ * ip_chksum, and tcp_udp_chksum flags since the controller will replace
+ * the appropriate checksum fields for segmented packets. When this bit
+ * is 1, the hdr_size and mss fields must be valid.
+ */
+ #define TX_BD_LONG_LFLAGS_LSO UINT32_C(0x20)
+ /*
+ * If set to zero when LSO is '1', then the IPID will be treated as a
+ * 16b number and will be wrapped if it exceeds a value of 0xffff. If
+ * set to one when LSO is '1', then the IPID will be treated as a 15b
+ * number and will be wrapped if it exceeds a value 0f 0x7fff.
+ */
+ #define TX_BD_LONG_LFLAGS_IPID_FMT UINT32_C(0x40)
+ /*
+ * If set to zero when LSO is '1', then the IPID of the tunnel IP header
+ * will not be modified during LSO operations. If set to one when LSO is
+ * '1', then the IPID of the tunnel IP header will be incremented for
+ * each subsequent segment of an LSO operation. The flag is ignored if
+ * the LSO packet is a normal (non-tunneled) TCP packet.
+ */
+ #define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80)
+ /*
+ * If set to '1', then the RoCE ICRC will be appended to the packet.
+ * Packet must be a valid RoCE format packet.
+ */
+ #define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100)
+ /*
+ * If set to '1', then the FCoE CRC will be appended to the packet.
+ * Packet must be a valid FCoE format packet.
+ */
+ #define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200)
+ uint16_t hdr_size;
+ /*
+ * When LSO is '1', this field must contain the offset of the TCP
+ * payload from the beginning of the packet in as 16b words. In case of
+ * encapsulated/tunneling packet, this field contains the offset of the
+ * inner TCP payload from beginning of the packet as 16-bit words. This
+ * value must be valid on the first BD of a packet.
+ */
+ #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff)
+ #define TX_BD_LONG_HDR_SIZE_SFT 0
+ uint32_t mss;
+ /*
+ * This is the MSS value that will be used to do the LSO processing. The
+ * value is the length in bytes of the TCP payload for each segment
+ * generated by the LSO operation. This value must be valid on the first
+ * BD of a packet.
+ */
+ #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff)
+ #define TX_BD_LONG_MSS_SFT 0
+ uint16_t unused_2;
+ uint16_t cfa_action;
+ /*
+ * This value selects a CFA action to perform on the packet. Set this
+ * value to zero if no CFA action is desired. This value must be valid
+ * on the first BD of a packet.
+ */
+ uint32_t cfa_meta;
+ /*
+ * This value is action meta-data that defines CFA edit operations that
+ * are done in addition to any action editing.
+ */
+ /* When key=1, This is the VLAN tag VID value. */
+ #define TX_BD_LONG_CFA_META_VLAN_VID_MASK UINT32_C(0xfff)
+ #define TX_BD_LONG_CFA_META_VLAN_VID_SFT 0
+ /* When key=1, This is the VLAN tag DE value. */
+ #define TX_BD_LONG_CFA_META_VLAN_DE UINT32_C(0x1000)
+ /* When key=1, This is the VLAN tag PRI value. */
+ #define TX_BD_LONG_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000)
+ #define TX_BD_LONG_CFA_META_VLAN_PRI_SFT 13
+ /* When key=1, This is the VLAN tag TPID select value. */
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_SFT 16
+ /* 0x88a8 */
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8 (UINT32_C(0x0) << 16)
+ /* 0x8100 */
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100 (UINT32_C(0x1) << 16)
+ /* 0x9100 */
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100 (UINT32_C(0x2) << 16)
+ /* 0x9200 */
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200 (UINT32_C(0x3) << 16)
+ /* 0x9300 */
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16)
+ /* Value programmed in CFA VLANTPID register. */
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG
+ /* When key=1, This is the VLAN tag TPID select value. */
+ #define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000)
+ #define TX_BD_LONG_CFA_META_VLAN_RESERVED_SFT 19
+ /*
+ * This field identifies the type of edit to be performed on the packet.
+ * This value must be valid on the first BD of a packet.
+ */
+ #define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000)
+ #define TX_BD_LONG_CFA_META_KEY_SFT 28
+ /* No editing */
+ #define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28)
+ /*
+ * - meta[17:16] - TPID select value (0 = 0x8100). - meta[15:12]
+ * - PRI/DE value. - meta[11:0] - VID value.
+ */
+ #define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
+ #define TX_BD_LONG_CFA_META_KEY_LAST TX_BD_LONG_CFA_META_KEY_VLAN_TAG
+} __attribute__((packed));
+
+/* Empty TX BD (16 bytes) */
+
+struct tx_bd_empty {
+ uint8_t type;
+ /* This value identifies the type of buffer descriptor. */
+ #define TX_BD_EMPTY_TYPE_MASK UINT32_C(0x3f)
+ #define TX_BD_EMPTY_TYPE_SFT 0
+ /*
+ * Indicates that this BD is 1BB long and is an empty TX BD. Not
+ * valid for use by the driver.
+ */
+ #define TX_BD_EMPTY_TYPE_TX_BD_EMPTY UINT32_C(0x1)
+ uint8_t unused_1[3];
+ uint8_t unused_2;
+ uint8_t unused_3[3];
+ uint64_t unused_4;
+} __attribute__((packed));
+
+/* RX Producer Packet BD (16 bytes) */
+
+struct rx_prod_pkt_bd {
+ uint16_t flags_type;
+ /* This value identifies the type of buffer descriptor. */
+ #define RX_PROD_PKT_BD_TYPE_MASK UINT32_C(0x3f)
+ #define RX_PROD_PKT_BD_TYPE_SFT 0
+ /*
+ * Indicates that this BD is 16B long and is an RX Producer (ie.
+ * empty) buffer descriptor.
+ */
+ #define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4)
+ /*
+ * If set to 1, the packet will be placed at the address plus 2B. The 2
+ * Bytes of padding will be written as zero.
+ */
+ /*
+ * This is intended to be used when the host buffer is cache-line
+ * aligned to produce packets that are easy to parse in host memory
+ * while still allowing writes to be cache line aligned.
+ */
+ #define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40)
+ /*
+ * If set to 1, the packet write will be padded out to the nearest
+ * cache-line with zero value padding.
+ */
+ /*
+ * If receive buffers start/end on cache-line boundaries, this feature
+ * will ensure that all data writes on the PCI bus start/end on cache
+ * line boundaries.
+ */
+ #define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80)
+ /*
+ * This value is the number of additional buffers in the ring that
+ * describe the buffer space to be consumed for the this packet. If the
+ * value is zero, then the packet must fit within the space described by
+ * this BD. If this value is 1 or more, it indicates how many additional
+ * "buffer" BDs are in the ring immediately following this BD to be used
+ * for the same network packet. Even if the packet to be placed does not
+ * need all the additional buffers, they will be consumed anyway.
+ */
+ #define RX_PROD_PKT_BD_FLAGS_BUFFERS_MASK UINT32_C(0x300)
+ #define RX_PROD_PKT_BD_FLAGS_BUFFERS_SFT 8
+ #define RX_PROD_PKT_BD_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_PROD_PKT_BD_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This is the length in Bytes of the host physical buffer where data
+ * for the packet may be placed in host memory.
+ */
+ /*
+ * While this is a Byte resolution value, it is often advantageous to
+ * ensure that the buffers provided end on a host cache line.
+ */
+ uint32_t opaque;
+ /*
+ * The opaque data field is pass through to the completion and can be
+ * used for any data that the driver wants to associate with this
+ * receive buffer set.
+ */
+ uint64_t addr;
+ /*
+ * This is the host physical address where data for the packet may by
+ * placed in host memory.
+ */
+ /*
+ * While this is a Byte resolution value, it is often advantageous to
+ * ensure that the buffers provide start on a host cache line.
+ */
+} __attribute__((packed));
+
+/* RX Producer Buffer BD (16 bytes) */
+
+struct rx_prod_bfr_bd {
+ uint16_t flags_type;
+ /* This value identifies the type of buffer descriptor. */
+ #define RX_PROD_BFR_BD_TYPE_MASK UINT32_C(0x3f)
+ #define RX_PROD_BFR_BD_TYPE_SFT 0
+ /*
+ * Indicates that this BD is 16B long and is an RX Producer
+ * Buffer BD.
+ */
+ #define RX_PROD_BFR_BD_TYPE_RX_PROD_BFR UINT32_C(0x5)
+ #define RX_PROD_BFR_BD_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_PROD_BFR_BD_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This is the length in Bytes of the host physical buffer where data
+ * for the packet may be placed in host memory.
+ */
+ /*
+ * While this is a Byte resolution value, it is often advantageous to
+ * ensure that the buffers provided end on a host cache line.
+ */
+ uint32_t opaque;
+ /* This field is not used. */
+ uint64_t addr;
+ /*
+ * This is the host physical address where data for the packet may by
+ * placed in host memory.
+ */
+ /*
+ * While this is a Byte resolution value, it is often advantageous to
+ * ensure that the buffers provide start on a host cache line.
+ */
+} __attribute__((packed));
+
+/* RX Producer Aggregation BD (16 bytes) */
+
+struct rx_prod_agg_bd {
+ uint16_t flags_type;
+ /* This value identifies the type of buffer descriptor. */
+ #define RX_PROD_AGG_BD_TYPE_MASK UINT32_C(0x3f)
+ #define RX_PROD_AGG_BD_TYPE_SFT 0
+ /*
+ * Indicates that this BD is 16B long and is an RX Producer
+ * Assembly Buffer Descriptor.
+ */
+ #define RX_PROD_AGG_BD_TYPE_RX_PROD_AGG UINT32_C(0x6)
+ /*
+ * If set to 1, the packet write will be padded out to the nearest
+ * cache-line with zero value padding.
+ */
+ /*
+ * If receive buffers start/end on cache-line boundaries, this feature
+ * will ensure that all data writes on the PCI bus end on cache line
+ * boundaries.
+ */
+ #define RX_PROD_AGG_BD_FLAGS_EOP_PAD UINT32_C(0x40)
+ #define RX_PROD_AGG_BD_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_PROD_AGG_BD_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This is the length in Bytes of the host physical buffer where data
+ * for the packet may be placed in host memory.
+ */
+ /*
+ * While this is a Byte resolution value, it is often advantageous to
+ * ensure that the buffers provided end on a host cache line.
+ */
+ uint32_t opaque;
+ /*
+ * The opaque data field is pass through to the completion and can be
+ * used for any data that the driver wants to associate with this
+ * receive assembly buffer.
+ */
+ uint64_t addr;
+ /*
+ * This is the host physical address where data for the packet may by
+ * placed in host memory.
+ */
+ /*
+ * While this is a Byte resolution value, it is often advantageous to
+ * ensure that the buffers provide start on a host cache line.
+ */
+} __attribute__((packed));
+
+/* Completion Ring Structures */
+/* Note: This structure is used by the HWRM to communicate HWRM Error. */
+/* Base Completion Record (16 bytes) */
+
+struct cmpl_base {
+ uint16_t type;
+ /* unused is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define CMPL_BASE_TYPE_MASK UINT32_C(0x3f)
+ #define CMPL_BASE_TYPE_SFT 0
+ /* TX L2 completion: Completion of TX packet. Length = 16B */
+ #define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0)
+ /* RX L2 completion: Completion of and L2 RX packet. Length = 32B */
+ #define CMPL_BASE_TYPE_RX_L2 UINT32_C(0x11)
+ /*
+ * RX Aggregation Buffer completion : Completion of an L2
+ * aggregation buffer in support of TPA, HDS, or Jumbo packet
+ * completion. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12)
+ /*
+ * RX L2 TPA Start Completion: Completion at the beginning of a
+ * TPA operation. Length = 32B
+ */
+ #define CMPL_BASE_TYPE_RX_TPA_START UINT32_C(0x13)
+ /*
+ * RX L2 TPA End Completion: Completion at the end of a TPA
+ * operation. Length = 32B
+ */
+ #define CMPL_BASE_TYPE_RX_TPA_END UINT32_C(0x15)
+ /*
+ * Statistics Ejection Completion: Completion of statistics data
+ * ejection buffer. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_STAT_EJECT UINT32_C(0x1a)
+ /* HWRM Command Completion: Completion of an HWRM command. */
+ #define CMPL_BASE_TYPE_HWRM_DONE UINT32_C(0x20)
+ /* Forwarded HWRM Request */
+ #define CMPL_BASE_TYPE_HWRM_FWD_REQ UINT32_C(0x22)
+ /* Forwarded HWRM Response */
+ #define CMPL_BASE_TYPE_HWRM_FWD_RESP UINT32_C(0x24)
+ /* HWRM Asynchronous Event Information */
+ #define CMPL_BASE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* CQ Notification */
+ #define CMPL_BASE_TYPE_CQ_NOTIFICATION UINT32_C(0x30)
+ /* SRQ Threshold Event */
+ #define CMPL_BASE_TYPE_SRQ_EVENT UINT32_C(0x32)
+ /* DBQ Threshold Event */
+ #define CMPL_BASE_TYPE_DBQ_EVENT UINT32_C(0x34)
+ /* QP Async Notification */
+ #define CMPL_BASE_TYPE_QP_EVENT UINT32_C(0x38)
+ /* Function Async Notification */
+ #define CMPL_BASE_TYPE_FUNC_EVENT UINT32_C(0x3a)
+ /* unused is 10 b */
+ uint16_t info1;
+ /* info1 is 16 b */
+ uint32_t info2;
+ /* info2 is 32 b */
+ uint32_t info3_v;
+ /* info3 is 31 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define CMPL_BASE_V UINT32_C(0x1)
+ /* info3 is 31 b */
+ #define CMPL_BASE_INFO3_MASK UINT32_C(0xfffffffe)
+ #define CMPL_BASE_INFO3_SFT 1
+ uint32_t info4;
+ /* info4 is 32 b */
+} __attribute__((packed));
+
+/* TX Completion Record (16 bytes) */
+
+struct tx_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define TX_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define TX_CMPL_TYPE_SFT 0
+ /* TX L2 completion: Completion of TX packet. Length = 16B */
+ #define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0)
+ /*
+ * When this bit is '1', it indicates a packet that has an error of some
+ * type. Type of error is indicated in error_flags.
+ */
+ #define TX_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet completed was
+ * transmitted using the push acceleration data provided by the driver.
+ * When this bit is '0', it indicates that the packet had not push
+ * acceleration data written or was executed as a normal packet even
+ * though push data was provided.
+ */
+ #define TX_CMPL_FLAGS_PUSH UINT32_C(0x80)
+ #define TX_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_CMPL_FLAGS_SFT 6
+ uint16_t unused_0;
+ /* unused1 is 16 b */
+ uint32_t opaque;
+ /*
+ * This is a copy of the opaque field from the first TX BD of this
+ * transmitted packet.
+ */
+ uint16_t errors_v;
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define TX_CMPL_V UINT32_C(0x1)
+ /*
+ * This error indicates that there was some sort of problem with the BDs
+ * for the packet.
+ */
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No error */
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1)
+ /* Bad Format: BDs were not formatted correctly. */
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1)
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
+ /*
+ * When this bit is '1', it indicates that the length of the packet was
+ * zero. No packet was transmitted.
+ */
+ #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
+ /*
+ * When this bit is '1', it indicates that the packet was longer than
+ * the programmed limit in TDI. No packet was transmitted.
+ */
+ #define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
+ /*
+ * When this bit is '1', it indicates that one or more of the BDs
+ * associated with this packet generated a PCI error. This probably
+ * means the address was not valid.
+ */
+ #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet was longer than
+ * indicated by the hint. No packet was transmitted.
+ */
+ #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that the packet was dropped due to
+ * Poison TLP error on one or more of the TLPs in the PXP completion.
+ */
+ #define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100)
+ #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define TX_CMPL_ERRORS_SFT 1
+ uint16_t unused_1;
+ /* unused2 is 16 b */
+ uint32_t unused_2;
+ /* unused3 is 32 b */
+} __attribute__((packed));
+
+/* RX Packet Completion Record (32 bytes split to 2 16-byte struct) */
+
+struct rx_pkt_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_PKT_CMPL_TYPE_SFT 0
+ /* RX L2 completion: Completion of and L2 RX packet. Length = 32B */
+ #define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11)
+ /*
+ * When this bit is '1', it indicates a packet that has an error of some
+ * type. Type of error is indicated in error_flags.
+ */
+ #define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT 7
+ /* Normal: Packet was placed using normal algorithm. */
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL (UINT32_C(0x0) << 7)
+ /* Jumbo: Packet was placed using jumbo algorithm. */
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation: Packet was placed using Header/Data
+ * separation algorithm. The separation location is indicated by
+ * the itype field.
+ */
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
+ /* unused is 1 b */
+ /*
+ * This value indicates what the inner packet determined for the packet
+ * was.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_PKT_CMPL_FLAGS_ITYPE_SFT 12
+ /* Not Known: Indicates that the packet type was not known. */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN (UINT32_C(0x0) << 12)
+ /*
+ * IP Packet: Indicates that the packet was an IP packet, but
+ * further classification was not possible.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_IP (UINT32_C(0x1) << 12)
+ /*
+ * TCP Packet: Indicates that the packet was IP and TCP. This
+ * indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_TCP (UINT32_C(0x2) << 12)
+ /*
+ * UDP Packet: Indicates that the packet was IP and UDP. This
+ * indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_UDP (UINT32_C(0x3) << 12)
+ /*
+ * FCoE Packet: Indicates that the packet was recognized as a
+ * FCoE. This also indicates that the payload_offset field is
+ * valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_FCOE (UINT32_C(0x4) << 12)
+ /*
+ * RoCE Packet: Indicates that the packet was recognized as a
+ * RoCE. This also indicates that the payload_offset field is
+ * valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_ROCE (UINT32_C(0x5) << 12)
+ /*
+ * ICMP Packet: Indicates that the packet was recognized as
+ * ICMP. This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_ICMP (UINT32_C(0x7) << 12)
+ /*
+ * PtP packet wo/timestamp: Indicates that the packet was
+ * recognized as a PtP packet.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP (UINT32_C(0x8) << 12)
+ /*
+ * PtP packet w/timestamp: Indicates that the packet was
+ * recognized as a PtP packet and that a timestamp was taken for
+ * the packet.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP (UINT32_C(0x9) << 12)
+ #define RX_PKT_CMPL_FLAGS_ITYPE_LAST RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
+ #define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_PKT_CMPL_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This is the length of the data for the packet stored in the buffer(s)
+ * identified by the opaque value. This includes the packet BD and any
+ * associated buffer BDs. This does not include the the length of any
+ * data places in aggregation BDs.
+ */
+ uint32_t opaque;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint8_t agg_bufs_v1;
+ /* unused1 is 2 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define RX_PKT_CMPL_V1 UINT32_C(0x1)
+ /*
+ * This value is the number of aggregation buffers that follow this
+ * entry in the completion ring that are a part of this packet. If the
+ * value is zero, then the packet is completely contained in the buffer
+ * space provided for the packet in the RX ring.
+ */
+ #define RX_PKT_CMPL_AGG_BUFS_MASK UINT32_C(0x3e)
+ #define RX_PKT_CMPL_AGG_BUFS_SFT 1
+ /* unused1 is 2 b */
+ uint8_t rss_hash_type;
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ */
+ uint8_t payload_offset;
+ /*
+ * This value indicates the offset in bytes from the beginning of the
+ * packet where the inner payload starts. This value is valid for TCP,
+ * UDP, FCoE, and RoCE packets. A value of zero indicates that header is
+ * 256B into the packet.
+ */
+ uint8_t unused_1;
+ /* unused2 is 8 b */
+ uint32_t rss_hash;
+ /*
+ * This value is the RSS hash value calculated for the packet based on
+ * the mode bits and key value in the VNIC.
+ */
+} __attribute__((packed));
+
+/* last 16 bytes of RX Packet Completion Record */
+
+struct rx_pkt_cmpl_hi {
+ uint32_t flags2;
+ /*
+ * This indicates that the ip checksum was calculated for the inner
+ * packet and that the ip_cs_error field indicates if there was an
+ * error.
+ */
+ #define RX_PKT_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
+ /*
+ * This indicates that the TCP, UDP or ICMP checksum was calculated for
+ * the inner packet and that the l4_cs_error field indicates if there
+ * was an error.
+ */
+ #define RX_PKT_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
+ /*
+ * This indicates that the ip checksum was calculated for the tunnel
+ * header and that the t_ip_cs_error field indicates if there was an
+ * error.
+ */
+ #define RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
+ /*
+ * This indicates that the UDP checksum was calculated for the tunnel
+ * packet and that the t_l4_cs_error field indicates if there was an
+ * error.
+ */
+ #define RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* No metadata informtaion. Value is zero. */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4)
+ /*
+ * The metadata field contains the VLAN tag and TPID value. -
+ * metadata[11:0] contains the vlan VID value. - metadata[12]
+ * contains the vlan DE value. - metadata[15:13] contains the
+ * vlan PRI value. - metadata[31:16] contains the vlan TPID
+ * value.
+ */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN
+ /*
+ * This field indicates the IP type for the inner-most IP header. A
+ * value of '0' indicates IPv4. A value of '1' indicates IPv6. This
+ * value is only valid if itype indicates a packet with an IP header.
+ */
+ #define RX_PKT_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
+ uint32_t metadata;
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ /* When meta_format=1, this value is the VLAN VID. */
+ #define RX_PKT_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
+ #define RX_PKT_CMPL_METADATA_VID_SFT 0
+ /* When meta_format=1, this value is the VLAN DE. */
+ #define RX_PKT_CMPL_METADATA_DE UINT32_C(0x1000)
+ /* When meta_format=1, this value is the VLAN PRI. */
+ #define RX_PKT_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
+ #define RX_PKT_CMPL_METADATA_PRI_SFT 13
+ /* When meta_format=1, this value is the VLAN TPID. */
+ #define RX_PKT_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
+ #define RX_PKT_CMPL_METADATA_TPID_SFT 16
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define RX_PKT_CMPL_V2 UINT32_C(0x1)
+ /*
+ * This error indicates that there was some sort of problem with the BDs
+ * for the packet that was found after part of the packet was already
+ * placed. The packet should be treated as invalid.
+ */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER (UINT32_C(0x0) << 1)
+ /*
+ * Did Not Fit: Packet did not fit into packet buffer provided.
+ * For regular placement, this means the packet did not fit in
+ * the buffer provided. For HDS and jumbo placement, this means
+ * that the packet could not be placed into 7 physical buffers
+ * or less.
+ */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT (UINT32_C(0x1) << 1)
+ /*
+ * Not On Chip: All BDs needed for the packet were not on-chip
+ * when the packet arrived.
+ */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP (UINT32_C(0x2) << 1)
+ /* Bad Format: BDs were not formatted correctly. */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT (UINT32_C(0x3) << 1)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT
+ /* This indicates that there was an error in the IP header checksum. */
+ #define RX_PKT_CMPL_ERRORS_IP_CS_ERROR UINT32_C(0x10)
+ /*
+ * This indicates that there was an error in the TCP, UDP or ICMP
+ * checksum.
+ */
+ #define RX_PKT_CMPL_ERRORS_L4_CS_ERROR UINT32_C(0x20)
+ /*
+ * This indicates that there was an error in the tunnel IP header
+ * checksum.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_IP_CS_ERROR UINT32_C(0x40)
+ /* This indicates that there was an error in the tunnel UDP checksum. */
+ #define RX_PKT_CMPL_ERRORS_T_L4_CS_ERROR UINT32_C(0x80)
+ /*
+ * This indicates that there was a CRC error on either an FCoE or RoCE
+ * packet. The itype indicates the packet type.
+ */
+ #define RX_PKT_CMPL_ERRORS_CRC_ERROR UINT32_C(0x100)
+ /*
+ * This indicates that there was an error in the tunnel portion of the
+ * packet when this field is non-zero.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_MASK UINT32_C(0xe00)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_SFT 9
+ /*
+ * No additional error occurred on the tunnel portion of the
+ * packet of the packet does not have a tunnel.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_NO_ERROR (UINT32_C(0x0) << 9)
+ /*
+ * Indicates that IP header version does not match expectation
+ * from L2 Ethertype for IPv4 and IPv6 in the tunnel header.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION (UINT32_C(0x1) << 9)
+ /*
+ * Indicates that header length is out of range in the tunnel
+ * header. Valid for IPv4.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN (UINT32_C(0x2) << 9)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the PPPoE header length for a tunnel PPPoE packet.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR (UINT32_C(0x3) << 9)
+ /*
+ * Indicates that physical packet is shorter than that claimed
+ * by the tunnel l3 header length. Valid for IPv4, or IPv6
+ * tunnel packet packets.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR (UINT32_C(0x4) << 9)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the tunnel UDP header length for a tunnel UDP
+ * packet that is not fragmented.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR (UINT32_C(0x5) << 9)
+ /*
+ * indicates that the IPv4 TTL or IPv6 hop limit check have
+ * failed (e.g. TTL = 0) in the tunnel header. Valid for IPv4,
+ * and IPv6.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL (UINT32_C(0x6) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL
+ /*
+ * This indicates that there was an error in the inner portion of the
+ * packet when this field is non-zero.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_MASK UINT32_C(0xf000)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_SFT 12
+ /*
+ * No additional error occurred on the tunnel portion of the
+ * packet of the packet does not have a tunnel.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_NO_ERROR (UINT32_C(0x0) << 12)
+ /*
+ * Indicates that IP header version does not match expectation
+ * from L2 Ethertype for IPv4 and IPv6 or that option other than
+ * VFT was parsed on FCoE packet.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION (UINT32_C(0x1) << 12)
+ /*
+ * indicates that header length is out of range. Valid for IPv4
+ * and RoCE
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN (UINT32_C(0x2) << 12)
+ /*
+ * indicates that the IPv4 TTL or IPv6 hop limit check have
+ * failed (e.g. TTL = 0). Valid for IPv4, and IPv6
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL (UINT32_C(0x3) << 12)
+ /*
+ * Indicates that physical packet is shorter than that claimed
+ * by the l3 header length. Valid for IPv4, IPv6 packet or RoCE
+ * packets.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR (UINT32_C(0x4) << 12)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the UDP header length for a UDP packet that is not
+ * fragmented.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR (UINT32_C(0x5) << 12)
+ /*
+ * Indicates that TCP header length > IP payload. Valid for TCP
+ * packets only.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN (UINT32_C(0x6) << 12)
+ /* Indicates that TCP header length < 5. Valid for TCP. */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL (UINT32_C(0x7) << 12)
+ /*
+ * Indicates that TCP option headers result in a TCP header size
+ * that does not match data offset in TCP header. Valid for TCP.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN (UINT32_C(0x8) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN
+ #define RX_PKT_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define RX_PKT_CMPL_ERRORS_SFT 1
+ uint16_t cfa_code;
+ /*
+ * This field identifies the CFA action rule that was used for this
+ * packet.
+ */
+ uint32_t reorder;
+ /*
+ * This value holds the reordering sequence number for the packet. If
+ * the reordering sequence is not valid, then this value is zero. The
+ * reordering domain for the packet is in the bottom 8 to 10b of the
+ * rss_hash value. The bottom 20b of this value contain the ordering
+ * domain value for the packet.
+ */
+ #define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff)
+ #define RX_PKT_CMPL_REORDER_SFT 0
+} __attribute__((packed));
+
+/* RX L2 TPA Start Completion Record (32 bytes split to 2 16-byte struct) */
+
+struct rx_tpa_start_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_START_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA Start Completion: Completion at the beginning of a
+ * TPA operation. Length = 32B
+ */
+ #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13)
+ /* This bit will always be '0' for TPA start completions. */
+ #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo: TPA Packet was placed using jumbo algorithm. This
+ * means that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer will
+ * be filled before moving to the next aggregation buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation: Packet was placed using Header/Data
+ * separation algorithm. The separation location is indicated by
+ * the itype field.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
+ /*
+ * GRO/Jumbo: Packet will be placed using GRO/Jumbo where the
+ * first packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two aggregation
+ * buffers unless it starts at the beginning of an aggregation
+ * buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation: Packet will be placed using
+ * GRO/HDS where the header is in the first packet. Payload of
+ * each packet will be placed such that any one packet does not
+ * span two aggregation buffers unless it starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7)
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
+ /* unused is 1 b */
+ /*
+ * This value indicates what the inner packet determined for the packet
+ * was.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12
+ /* TCP Packet: Indicates that the packet was IP and TCP. */
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP (UINT32_C(0x2) << 12)
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST RX_TPA_START_CMPL_FLAGS_ITYPE_TCP
+ #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_START_CMPL_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This value indicates the amount of packet data written to the buffer
+ * the opaque field in this completion corresponds to.
+ */
+ uint32_t opaque;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint8_t v1;
+ /* unused1 is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define RX_TPA_START_CMPL_V1 UINT32_C(0x1)
+ /* unused1 is 7 b */
+ uint8_t rss_hash_type;
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ */
+ uint16_t agg_id;
+ /*
+ * This is the aggregation ID that the completion is associated with.
+ * Use this number to correlate the TPA start completion with the TPA
+ * end completion.
+ */
+ /* unused2 is 9 b */
+ /*
+ * This is the aggregation ID that the completion is associated with.
+ * Use this number to correlate the TPA start completion with the TPA
+ * end completion.
+ */
+ #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00)
+ #define RX_TPA_START_CMPL_AGG_ID_SFT 9
+ uint32_t rss_hash;
+ /*
+ * This value is the RSS hash value calculated for the packet based on
+ * the mode bits and key value in the VNIC.
+ */
+} __attribute__((packed));
+
+/* last 16 bytes of RX L2 TPA Start Completion Record */
+
+struct rx_tpa_start_cmpl_hi {
+ uint32_t flags2;
+ /*
+ * This indicates that the ip checksum was calculated for the inner
+ * packet and that the sum passed for all segments included in the
+ * aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
+ /*
+ * This indicates that the TCP, UDP or ICMP checksum was calculated for
+ * the inner packet and that the sum passed for all segments included in
+ * the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
+ /*
+ * This indicates that the ip checksum was calculated for the tunnel
+ * header and that the sum passed for all segments included in the
+ * aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
+ /*
+ * This indicates that the UDP checksum was calculated for the tunnel
+ * packet and that the sum passed for all segments included in the
+ * aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* No metadata informtaion. Value is zero. */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4)
+ /*
+ * The metadata field contains the VLAN tag and TPID value. -
+ * metadata[11:0] contains the vlan VID value. - metadata[12]
+ * contains the vlan DE value. - metadata[15:13] contains the
+ * vlan PRI value. - metadata[31:16] contains the vlan TPID
+ * value.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN
+ /*
+ * This field indicates the IP type for the inner-most IP header. A
+ * value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
+ uint32_t metadata;
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ /* When meta_format=1, this value is the VLAN VID. */
+ #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
+ #define RX_TPA_START_CMPL_METADATA_VID_SFT 0
+ /* When meta_format=1, this value is the VLAN DE. */
+ #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000)
+ /* When meta_format=1, this value is the VLAN PRI. */
+ #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
+ #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13
+ /* When meta_format=1, this value is the VLAN TPID. */
+ #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
+ #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16
+ uint16_t v2;
+ /* unused4 is 15 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define RX_TPA_START_CMPL_V2 UINT32_C(0x1)
+ /* unused4 is 15 b */
+ uint16_t cfa_code;
+ /*
+ * This field identifies the CFA action rule that was used for this
+ * packet.
+ */
+ uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
+ /*
+ * This is the size in bytes of the inner most L4 header. This can be
+ * subtracted from the payload_offset to determine the start of the
+ * inner most L4 header.
+ */
+ /*
+ * This is the offset from the beginning of the packet in bytes for the
+ * outer L3 header. If there is no outer L3 header, then this value is
+ * zero.
+ */
+ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
+ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0
+ /*
+ * This is the offset from the beginning of the packet in bytes for the
+ * inner most L2 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
+ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9
+ /*
+ * This is the offset from the beginning of the packet in bytes for the
+ * inner most L3 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
+ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18
+ /*
+ * This is the size in bytes of the inner most L4 header. This can be
+ * subtracted from the payload_offset to determine the start of the
+ * inner most L4 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
+ #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27
+} __attribute__((packed));
+
+/* RX TPA End Completion Record (32 bytes split to 2 16-byte struct) */
+
+struct rx_tpa_end_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_END_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA End Completion: Completion at the end of a TPA
+ * operation. Length = 32B
+ */
+ #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
+ /*
+ * When this bit is '1', it indicates a packet that has an error of some
+ * type. Type of error is indicated in error_flags.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo: TPA Packet was placed using jumbo algorithm. This
+ * means that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer will
+ * be filled before moving to the next aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation: Packet was placed using Header/Data
+ * separation algorithm. The separation location is indicated by
+ * the itype field.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
+ /*
+ * GRO/Jumbo: Packet will be placed using GRO/Jumbo where the
+ * first packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two aggregation
+ * buffers unless it starts at the beginning of an aggregation
+ * buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation: Packet will be placed using
+ * GRO/HDS where the header is in the first packet. Payload of
+ * each packet will be placed such that any one packet does not
+ * span two aggregation buffers unless it starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7)
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* unused is 2 b */
+ /*
+ * This value indicates what the inner packet determined for the packet
+ * was. - 2 TCP Packet Indicates that the packet was IP and TCP. This
+ * indicates that the ip_cs field is valid and that the tcp_udp_cs field
+ * is valid and contains the TCP checksum. This also indicates that the
+ * payload_offset field is valid.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12
+ #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_END_CMPL_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This value is zero for TPA End completions. There is no data in the
+ * buffer that corresponds to the opaque value in this completion.
+ */
+ uint32_t opaque;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint8_t agg_bufs_v1;
+ /* unused1 is 1 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define RX_TPA_END_CMPL_V1 UINT32_C(0x1)
+ /*
+ * This value is the number of aggregation buffers that follow this
+ * entry in the completion ring that are a part of this aggregation
+ * packet. If the value is zero, then the packet is completely contained
+ * in the buffer space provided in the aggregation start completion.
+ */
+ #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e)
+ #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1
+ /* unused1 is 1 b */
+ uint8_t tpa_segs;
+ /* This value is the number of segments in the TPA operation. */
+ uint8_t payload_offset;
+ /*
+ * This value indicates the offset in bytes from the beginning of the
+ * packet where the inner payload starts. This value is valid for TCP,
+ * UDP, FCoE, and RoCE packets. A value of zero indicates an offset of
+ * 256 bytes.
+ */
+ uint8_t agg_id;
+ /*
+ * This is the aggregation ID that the completion is associated with.
+ * Use this number to correlate the TPA start completion with the TPA
+ * end completion.
+ */
+ /* unused2 is 1 b */
+ /*
+ * This is the aggregation ID that the completion is associated with.
+ * Use this number to correlate the TPA start completion with the TPA
+ * end completion.
+ */
+ #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe)
+ #define RX_TPA_END_CMPL_AGG_ID_SFT 1
+ uint32_t tsdelta;
+ /*
+ * For non-GRO packets, this value is the timestamp delta between
+ * earliest and latest timestamp values for TPA packet. If packets were
+ * not time stamped, then delta will be zero. For GRO packets, this
+ * field is zero except for the following sub-fields. - tsdelta[31]
+ * Timestamp present indication. When '0', no Timestamp option is in the
+ * packet. When '1', then a Timestamp option is present in the packet.
+ */
+} __attribute__((packed));
+
+/* last 16 bytes of RX TPA End Completion Record */
+
+struct rx_tpa_end_cmpl_hi {
+ uint32_t tpa_dup_acks;
+ /* unused3 is 28 b */
+ /*
+ * This value is the number of duplicate ACKs that have been received as
+ * part of the TPA operation.
+ */
+ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
+ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0
+ /* unused3 is 28 b */
+ uint16_t tpa_seg_len;
+ /*
+ * This value is the valid when TPA completion is active. It indicates
+ * the length of the longest segment of the TPA operation for LRO mode
+ * and the length of the first segment in GRO mode. This value may be
+ * used by GRO software to re-construct the original packet stream from
+ * the TPA packet. This is the length of all but the last segment for
+ * GRO. In LRO mode this value may be used to indicate MSS size to the
+ * stack.
+ */
+ uint16_t unused_3;
+ /* unused4 is 16 b */
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define RX_TPA_END_CMPL_V2 UINT32_C(0x1)
+ /*
+ * This error indicates that there was some sort of problem with the BDs
+ * for the packet that was found after part of the packet was already
+ * placed. The packet should be treated as invalid.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /*
+ * This error occurs when there is a fatal HW problem in the
+ * chip only. It indicates that there were not BDs on chip but
+ * that there was adequate reservation. provided by the TPA
+ * block.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP (UINT32_C(0x2) << 1)
+ /*
+ * This error occurs when TPA block was not configured to
+ * reserve adequate BDs for TPA operations on this RX ring. All
+ * data for the TPA operation was not placed. This error can
+ * also be generated when the number of segments is not
+ * programmed correctly in TPA and the 33 total aggregation
+ * buffers allowed for the TPA operation has been exceeded.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR (UINT32_C(0x4) << 1)
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR
+ #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define RX_TPA_END_CMPL_ERRORS_SFT 1
+ uint16_t unused_4;
+ /* unused5 is 16 b */
+ uint32_t start_opaque;
+ /*
+ * This is the opaque value that was completed for the TPA start
+ * completion that corresponds to this TPA end completion.
+ */
+} __attribute__((packed));
+
+/* RX Aggregation Buffer Completion Record (16 bytes) */
+
+struct rx_abuf_cmpl {
+ uint16_t type;
+ /* unused is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_ABUF_CMPL_TYPE_SFT 0
+ /*
+ * RX Aggregation Buffer completion : Completion of an L2
+ * aggregation buffer in support of TPA, HDS, or Jumbo packet
+ * completion. Length = 16B
+ */
+ #define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12)
+ /* unused is 10 b */
+ uint16_t len;
+ /*
+ * This is the length of the data for the packet stored in this
+ * aggregation buffer identified by the opaque value. This does not
+ * include the length of any data placed in other aggregation BDs or in
+ * the packet or buffer BDs. This length does not include any space
+ * added due to hdr_offset register during HDS placement mode.
+ */
+ uint32_t opaque;
+ /*
+ * This is a copy of the opaque field from the RX BD this aggregation
+ * buffer corresponds to.
+ */
+ uint32_t v;
+ /* unused2 is 31 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define RX_ABUF_CMPL_V UINT32_C(0x1)
+ /* unused2 is 31 b */
+ uint32_t unused_2;
+ /* unused3 is 32 b */
+} __attribute__((packed));
+
+/* Statistics Ejection Buffer Completion Record (16 bytes) */
+
+struct eject_cmpl {
+ uint16_t type;
+ /* unused is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define EJECT_CMPL_TYPE_SFT 0
+ /*
+ * Statistics Ejection Completion: Completion of statistics data
+ * ejection buffer. Length = 16B
+ */
+ #define EJECT_CMPL_TYPE_STAT_EJECT UINT32_C(0x1a)
+ /* unused is 10 b */
+ uint16_t len;
+ /* This is the length of the statistics data stored in this buffer. */
+ uint32_t opaque;
+ /*
+ * This is a copy of the opaque field from the RX BD this ejection
+ * buffer corresponds to.
+ */
+ uint32_t v;
+ /* unused2 is 31 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define EJECT_CMPL_V UINT32_C(0x1)
+ /* unused2 is 31 b */
+ uint32_t unused_2;
+ /* unused3 is 32 b */
+} __attribute__((packed));
+
+/* HWRM Completion Record (16 bytes) */
+
+struct hwrm_cmpl {
+ uint16_t type;
+ /* unused is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_CMPL_TYPE_SFT 0
+ /* HWRM Command Completion: Completion of an HWRM command. */
+ #define HWRM_CMPL_TYPE_HWRM_DONE UINT32_C(0x20)
+ /* unused is 10 b */
+ uint16_t sequence_id;
+ /* This is the sequence_id of the HWRM command that has completed. */
+ uint32_t unused_1;
+ /* unused2 is 32 b */
+ uint32_t v;
+ /* unused3 is 31 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_CMPL_V UINT32_C(0x1)
+ /* unused3 is 31 b */
+ uint32_t unused_3;
+ /* unused4 is 32 b */
+} __attribute__((packed));
+
+/* HWRM Forwarded Request (16 bytes) */
+
+struct hwrm_fwd_req_cmpl {
+ uint16_t req_len_type;
+ /* Length of forwarded request in bytes. */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_FWD_REQ_CMPL_TYPE_SFT 0
+ /* Forwarded HWRM Request */
+ #define HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ UINT32_C(0x22)
+ /* Length of forwarded request in bytes. */
+ #define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0)
+ #define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6
+ uint16_t source_id;
+ /*
+ * Source ID of this request. Typically used in forwarding requests and
+ * responses. 0x0 - 0xFFF8 - Used for function ids 0xFFF8 - 0xFFFE -
+ * Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint32_t unused_0;
+ /* unused1 is 32 b */
+ uint64_t req_buf_addr_v;
+ /* Address of forwarded request. */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1)
+ /* Address of forwarded request. */
+ #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe)
+ #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1
+} __attribute__((packed));
+
+/* HWRM Forwarded Response (16 bytes) */
+
+struct hwrm_fwd_resp_cmpl {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_FWD_RESP_CMPL_TYPE_SFT 0
+ /* Forwarded HWRM Response */
+ #define HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP UINT32_C(0x24)
+ /* unused1 is 10 b */
+ uint16_t source_id;
+ /*
+ * Source ID of this response. Typically used in forwarding requests and
+ * responses. 0x0 - 0xFFF8 - Used for function ids 0xFFF8 - 0xFFFE -
+ * Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t resp_len;
+ /* Length of forwarded response in bytes. */
+ uint16_t unused_1;
+ /* unused2 is 16 b */
+ uint64_t resp_buf_addr_v;
+ /* Address of forwarded response. */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1)
+ /* Address of forwarded response. */
+ #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_MASK UINT32_C(0xfffffffe)
+ #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_SFT 1
+} __attribute__((packed));
+
+#define GET_EVENT_ID(x) \
+ ((x) == 0x30 ? "VF_FLR": \
+ ((x) == 0x20 ? "PF_DRVR_UNLOAD": \
+ ((x) == 0x10 ? "FUNC_DRVR_UNLOAD": \
+ ((x) == 0xff ? "HWRM_ERROR": \
+ ((x) == 0x32 ? "PF_VF_COMM_STATUS_CHANGE": \
+ ((x) == 0x33 ? "VF_CFG_CHANGE": \
+ ((x) == 0x11 ? "FUNC_DRVR_LOAD": \
+ ((x) == 0x31 ? "VF_MAC_ADDR_CHANGE": \
+ ((x) == 0x4 ? "PORT_CONN_NOT_ALLOWED": \
+ ((x) == 0x5 ? "LINK_SPEED_CFG_NOT_ALLOWED": \
+ ((x) == 0x6 ? "LINK_SPEED_CFG_CHANGE": \
+ ((x) == 0x7 ? "PORT_PHY_CFG_CHANGE": \
+ ((x) == 0x0 ? "LINK_STATUS_CHANGE": \
+ ((x) == 0x1 ? "LINK_MTU_CHANGE": \
+ ((x) == 0x2 ? "LINK_SPEED_CHANGE": \
+ ((x) == 0x3 ? "DCB_CONFIG_CHANGE": \
+ ((x) == 0x12 ? "FUNC_FLR_PROC_CMPLT": \
+ ((x) == 0x21 ? "PF_DRVR_LOAD": \
+ "Unknown event_id"))))))))))))))))))
+
+/* HWRM Asynchronous Event Completion Record (16 bytes) */
+
+struct hwrm_async_event_cmpl {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Link status changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE UINT32_C(0x0)
+ /* Link MTU changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE UINT32_C(0x1)
+ /* Link speed changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2)
+ /* DCB Configuration changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3)
+ /* Port connection not allowed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED UINT32_C(0x4)
+ /* Link speed configuration was not allowed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED UINT32_C(0x5)
+ /* Link speed configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE UINT32_C(0x6)
+ /* Port PHY configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE UINT32_C(0x7)
+ /* Function driver unloaded */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10)
+ /* Function driver loaded */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD UINT32_C(0x11)
+ /* Function FLR related processing has completed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_FLR_PROC_CMPLT UINT32_C(0x12)
+ /* PF driver unloaded */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD UINT32_C(0x20)
+ /* PF driver loaded */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD UINT32_C(0x21)
+ /* VF Function Level Reset (FLR) */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR UINT32_C(0x30)
+ /* VF MAC Address Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE UINT32_C(0x31)
+ /* PF-VF communication channel status change. */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE UINT32_C(0x32)
+ /* VF Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE UINT32_C(0x33)
+ /* HWRM Error */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR UINT32_C(0xff)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for link status change (16 bytes) */
+
+struct hwrm_async_event_cmpl_link_status_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Link status changed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE UINT32_C(0x0)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* Indicates link status change */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE UINT32_C(0x1)
+ /*
+ * If this bit set to 0, then it indicates that the link was up
+ * and it went down.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_DOWN (UINT32_C(0x0) << 0)
+ /*
+ * If this bit is set to 1, then it indicates that the link was
+ * down and it went up.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP (UINT32_C(0x1) << 0)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_LAST HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP
+ /* Indicates the physical port this link status change occur */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_MASK UINT32_C(0xe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_SFT 1
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_MASK UINT32_C(0xffff0)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_SFT 4
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for link MTU change (16 bytes) */
+
+struct hwrm_async_event_cmpl_link_mtu_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Link MTU changed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE UINT32_C(0x1)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* The new MTU of the link in bytes. */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for link speed change (16 bytes) */
+
+struct hwrm_async_event_cmpl_link_speed_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Link speed changed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /*
+ * When this bit is '1', the link was forced to the force_link_speed
+ * value.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_FORCE UINT32_C(0x1)
+ /* The new link speed in 100 Mbps units. */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_MASK UINT32_C(0xfffe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_SFT 1
+ /* 100Mb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100MB (UINT32_C(0x1) << 1)
+ /* 1Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_1GB (UINT32_C(0xa) << 1)
+ /* 2Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2GB (UINT32_C(0x14) << 1)
+ /* 2.5Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2_5GB (UINT32_C(0x19) << 1)
+ /* 10Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_10GB (UINT32_C(0x64) << 1)
+ /* 20Mb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_20GB (UINT32_C(0xc8) << 1)
+ /* 25Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_25GB (UINT32_C(0xfa) << 1)
+ /* 40Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_40GB (UINT32_C(0x190) << 1)
+ /* 50Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_50GB (UINT32_C(0x1f4) << 1)
+ /* 100Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB (UINT32_C(0x3e8) << 1)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_LAST HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_MASK UINT32_C(0xffff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_SFT 16
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for DCB Config change (16 bytes) */
+
+struct hwrm_async_event_cmpl_dcb_config_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* DCB Configuration changed */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_SFT 0
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for port connection not allowed (16 bytes) */
+
+struct hwrm_async_event_cmpl_port_conn_not_allowed {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Port connection not allowed */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED UINT32_C(0x4)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT 0
+ /*
+ * This value indicates the current port level enforcement policy for
+ * the optics module when there is an optical module mismatch and port
+ * is not connected.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT 16
+ /* No enforcement */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_NONE (UINT32_C(0x0) << 16)
+ /* Disable Transmit side Laser. */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_DISABLETX (UINT32_C(0x1) << 16)
+ /* Raise a warning message. */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_WARNINGMSG (UINT32_C(0x2) << 16)
+ /* Power down the module. */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN (UINT32_C(0x3) << 16)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for link speed config not allowed (16 bytes) */
+
+struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Link speed configuration was not allowed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED UINT32_C(0x5)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT 0
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for link speed configuration change (16 bytes) */
+
+struct hwrm_async_event_cmpl_link_speed_cfg_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Link speed configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE UINT32_C(0x6)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT 0
+ /*
+ * If set to 1, it indicates that the supported link speeds
+ * configuration on the port has changed. If set to 0, then there is no
+ * change in supported link speeds configuration.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_SUPPORTED_LINK_SPEEDS_CHANGE UINT32_C(0x10000)
+ /*
+ * If set to 1, it indicates that the link speed configuration on the
+ * port has become illegal or invalid. If set to 0, then the link speed
+ * configuration on the port is legal or valid.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG UINT32_C(0x20000)
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for port PHY configuration change (16 bytes) */
+
+struct hwrm_async_event_cmpl_port_phy_cfg_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Port PHY configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE UINT32_C(0x7)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT 0
+ /*
+ * If set to 1, it indicates that the FEC configuration on the port has
+ * changed. If set to 0, then there is no change in FEC configuration.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_FEC_CFG_CHANGE UINT32_C(0x10000)
+ /*
+ * If set to 1, it indicates that the EEE configuration on the port has
+ * changed. If set to 0, then there is no change in EEE configuration on
+ * the port.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_EEE_CFG_CHANGE UINT32_C(0x20000)
+ /*
+ * If set to 1, it indicates that the pause configuration on the PHY has
+ * changed. If set to 0, then there is no change in the pause
+ * configuration on the PHY.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE UINT32_C(0x40000)
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for Function Driver Unload (16 bytes) */
+
+struct hwrm_async_event_cmpl_func_drvr_unload {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Function driver unloaded */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* Function ID */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for Function Driver load (16 bytes) */
+
+struct hwrm_async_event_cmpl_func_drvr_load {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Function driver loaded */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD UINT32_C(0x11)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* Function ID */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record to indicate completion of FLR related processing (16 bytes) */
+
+struct hwrm_async_event_cmpl_func_flr_proc_cmplt {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* Function FLR related processing has completed */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT UINT32_C(0x12)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* Function ID */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT 0
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for PF Driver Unload (16 bytes) */
+
+struct hwrm_async_event_cmpl_pf_drvr_unload {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* PF driver unloaded */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD UINT32_C(0x20)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* PF ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0
+ /* Indicates the physical port this pf belongs to */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK UINT32_C(0x70000)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for PF Driver load (16 bytes) */
+
+struct hwrm_async_event_cmpl_pf_drvr_load {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* PF driver loaded */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD UINT32_C(0x21)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* PF ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0
+ /* Indicates the physical port this pf belongs to */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK UINT32_C(0x70000)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT 16
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for VF FLR (16 bytes) */
+
+struct hwrm_async_event_cmpl_vf_flr {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* VF Function Level Reset (FLR) */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR UINT32_C(0x30)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* VF ID */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_SFT 0
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for VF MAC Addr change (16 bytes) */
+
+struct hwrm_async_event_cmpl_vf_mac_addr_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* VF MAC Address Change */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE UINT32_C(0x31)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* VF ID */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_MASK UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT 0
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for PF-VF communication status change (16 bytes) */
+
+struct hwrm_async_event_cmpl_pf_vf_comm_status_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* PF-VF communication channel status change. */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE UINT32_C(0x32)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /*
+ * If this bit is set to 1, then it indicates that the PF-VF
+ * communication was lost and it is established. If this bit set to 0,
+ * then it indicates that the PF-VF communication was established and it
+ * is lost.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED UINT32_C(0x1)
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for VF configuration change (16 bytes) */
+
+struct hwrm_async_event_cmpl_vf_cfg_change {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* VF Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE UINT32_C(0x33)
+ uint32_t event_data2;
+ /* Event specific data */
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /*
+ * Each flag provided in this field indicates a specific VF
+ * configuration change. At least one of these flags shall be set to 1
+ * when an asynchronous event completion of this type is provided by the
+ * HWRM.
+ */
+ /*
+ * If this bit is set to 1, then the value of MTU was changed on this
+ * VF. If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE UINT32_C(0x1)
+ /*
+ * If this bit is set to 1, then the value of MRU was changed on this
+ * VF. If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE UINT32_C(0x2)
+ /*
+ * If this bit is set to 1, then the value of default MAC address was
+ * changed on this VF. If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE UINT32_C(0x4)
+ /*
+ * If this bit is set to 1, then the value of default VLAN was changed
+ * on this VF. If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE UINT32_C(0x8)
+} __attribute__((packed));
+
+/* HWRM Asynchronous Event Completion Record for HWRM Error (16 bytes) */
+
+struct hwrm_async_event_cmpl_hwrm_error {
+ uint16_t type;
+ /* unused1 is 10 b */
+ /*
+ * This field indicates the exact type of the completion. By convention,
+ * the LSB identifies the length of the record in 16B units. Even values
+ * indicate 16B records. Odd values indicate 32B records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* unused1 is 10 b */
+ uint16_t event_id;
+ /* Identifiers of events. */
+ /* HWRM Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR UINT32_C(0xff)
+ uint32_t event_data2;
+ /* Event specific data */
+ /* Severity of HWRM Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0
+ /* Warning */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING UINT32_C(0x0)
+ /* Non-fatal Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL UINT32_C(0x1)
+ /* Fatal Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL
+ uint8_t opaque_v;
+ /* opaque is 7 b */
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will write 1.
+ * The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1
+ uint8_t timestamp_lo;
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint32_t event_data1;
+ /* Event specific data */
+ /* Time stamp for error event */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP UINT32_C(0x1)
+} __attribute__((packed));
+
+/* Door Bell Formats */
+/*
+ * Description: The backup version of the packet must be valid in the TX ring
+ * before the push doorbell is written to the chip. The first 32b and the BD
+ * portion of the push doorbell must be written in multiples of 32b units on the
+ * PCI interface. The data portion of the push doorbell may be written in
+ * multiples of 8b units on the PCI interface. A push update must contain
+ * exactly one push packet. The backup version of the packet must start with a
+ * long (32B) BD and the BDs must be less than or equal to 16x16B units long.
+ */
+/*
+ * Note: This door bell format is used by the driver when it wants to push a
+ * packet into the chip for super-fast transmission. This pushes a partial BD
+ * and the packet data into the chip. If the chip has room, it will transmit the
+ * packet. If the chip dosn't have room, it will read the BD and packet data
+ * from host memory as a normal packet.
+ */
+/* TX Door Bell Format (4 bytes) */
+
+struct tx_doorbell {
+ uint32_t key_idx;
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is '0' for TX door bell operations.
+ */
+ /*
+ * BD Index of next BD that will be used to transmit data on the TX ring
+ * mapped to this door bell. NIC may read and process all BDs up to, but
+ * not including this index.
+ */
+ #define TX_DOORBELL_IDX_MASK UINT32_C(0xffffff)
+ #define TX_DOORBELL_IDX_SFT 0
+ /* reserved is 4 b */
+ #define TX_DOORBELL_RESERVED_MASK UINT32_C(0xf000000)
+ #define TX_DOORBELL_RESERVED_SFT 24
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is '0' for TX door bell operations.
+ */
+ #define TX_DOORBELL_KEY_MASK UINT32_C(0xf0000000)
+ #define TX_DOORBELL_KEY_SFT 28
+ /* TX Operation */
+ #define TX_DOORBELL_KEY_TX (UINT32_C(0x0) << 28)
+} __attribute__((packed));
+
+/* RX Door Bell Format (4 bytes) */
+
+struct rx_doorbell {
+ uint32_t key_idx;
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is '1' for RX door bell operations.
+ */
+ /*
+ * BD Index of next BD that will be used for an empty receive buffer on
+ * the RX ring mapped to this door bell. NIC may read and process all
+ * BDs up to, but not including this index.
+ */
+ #define RX_DOORBELL_IDX_MASK UINT32_C(0xffffff)
+ #define RX_DOORBELL_IDX_SFT 0
+ /* reserved is 4 b */
+ #define RX_DOORBELL_RESERVED_MASK UINT32_C(0xf000000)
+ #define RX_DOORBELL_RESERVED_SFT 24
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is '1' for RX door bell operations.
+ */
+ #define RX_DOORBELL_KEY_MASK UINT32_C(0xf0000000)
+ #define RX_DOORBELL_KEY_SFT 28
+ /* RX Operation */
+ #define RX_DOORBELL_KEY_RX (UINT32_C(0x1) << 28)
+} __attribute__((packed));
+
+/* CMP Door Bell Format (4 bytes) */
+
+struct cmpl_doorbell {
+ uint32_t key_mask_valid_idx;
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is '2' for CMP door bell operations.
+ */
+ /*
+ * BD Index of the most recently handed completion record on the
+ * completion ring mapped to this door bell. NIC may write this location
+ * again with a new completion.
+ */
+ #define CMPL_DOORBELL_IDX_MASK UINT32_C(0xffffff)
+ #define CMPL_DOORBELL_IDX_SFT 0
+ /* reserved is 2 b */
+ #define CMPL_DOORBELL_RESERVED_MASK UINT32_C(0x3000000)
+ #define CMPL_DOORBELL_RESERVED_SFT 24
+ /*
+ * This indicates if the BDIDX value is valid for this update when it is
+ * '1'. When it is '0', the BDIDX value should be ignored.
+ */
+ #define CMPL_DOORBELL_IDX_VALID UINT32_C(0x4000000)
+ /*
+ * This bit indicates the new interrupt mask state for the interrupt
+ * associated with the BDIDX. A '1', means the interrupt is to be
+ * masked. A '0' indicates the interrupt is to be unmasked.
+ */
+ #define CMPL_DOORBELL_MASK UINT32_C(0x8000000)
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is '2' for CMP door bell operations.
+ */
+ #define CMPL_DOORBELL_KEY_MASK UINT32_C(0xf0000000)
+ #define CMPL_DOORBELL_KEY_SFT 28
+ /* Completion Operation */
+ #define CMPL_DOORBELL_KEY_CMPL (UINT32_C(0x2) << 28)
+} __attribute__((packed));
+
+/* Status Door Bell Format (4 bytes) */
+
+struct status_doorbell {
+ uint32_t key_idx;
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is '3' for Status door bell operations.
+ */
+ /*
+ * BD Index of the status record for which space is now available to the
+ * NIC.
+ */
+ /*
+ * While there is no actual BD associated with the index, the similar
+ * scheme is being used to communicate to the NIC that space is
+ * available for status completions.
+ */
+ #define STATUS_DOORBELL_IDX_MASK UINT32_C(0xffffff)
+ #define STATUS_DOORBELL_IDX_SFT 0
+ /* reserved is 4 b */
+ #define STATUS_DOORBELL_RESERVED_MASK UINT32_C(0xf000000)
+ #define STATUS_DOORBELL_RESERVED_SFT 24
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is '3' for Status door bell operations.
+ */
+ #define STATUS_DOORBELL_KEY_MASK UINT32_C(0xf0000000)
+ #define STATUS_DOORBELL_KEY_SFT 28
+ /* Status Operation */
+ #define STATUS_DOORBELL_KEY_STAT (UINT32_C(0x3) << 28)
+} __attribute__((packed));
+
+/* Push w/32B BD Door Bell Format (32 bytes) */
+
+struct push32_doorbell {
+ uint32_t key_sz_idx;
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is 4 for push door bell operations.
+ */
+ /*
+ * This is the BD Index of last BD of the push packet that will be used
+ * to transmit data on the TX ring mapped to this door bell.
+ */
+ #define PUSH32_DOORBELL_IDX_MASK UINT32_C(0xffffff)
+ #define PUSH32_DOORBELL_IDX_SFT 0
+ /*
+ * This is the number of 16B BDs spaces consumed in the TX Ring by the
+ * "backup" version of the packet being pushed. A value of 1 is invalid
+ * since backup must start with a long 32B BE. A value of 2 indicates
+ * just the first 32B BE. A value of 3 indicates 32B+16B BD. etc. A
+ * value of 0 indicates 16x16B BD spaces are consumed.
+ */
+ #define PUSH32_DOORBELL_SZ_MASK UINT32_C(0xf000000)
+ #define PUSH32_DOORBELL_SZ_SFT 24
+ /*
+ * This value indicates the type of door bell operation that is begin
+ * requested. This value is 4 for push door bell operations.
+ */
+ #define PUSH32_DOORBELL_KEY_MASK UINT32_C(0xf0000000)
+ #define PUSH32_DOORBELL_KEY_SFT 28
+ /* Push Operation */
+ #define PUSH32_DOORBELL_KEY_PUSH (UINT32_C(0x4) << 28)
+ uint16_t flags_type;
+ /*
+ * All bits in this field must be valid on the first BD of a packet.
+ * Only the packet_end bit must be valid for the remaining BDs of a
+ * packet.
+ */
+ /* This value identifies the type of buffer descriptor. */
+ #define PUSH32_DOORBELL_TYPE_MASK UINT32_C(0x3f)
+ #define PUSH32_DOORBELL_TYPE_SFT 0
+ /*
+ * Indicates that this BD is 32B long and is used for normal L2
+ * packet transmission.
+ */
+ #define PUSH32_DOORBELL_TYPE_TX_BD_LONG UINT32_C(0x10)
+ /*
+ * If set to 1, the packet ends with the data in the buffer pointed to
+ * by this descriptor. This flag must be valid on every BD. This bit
+ * must be set on all push doorbells.
+ */
+ #define PUSH32_DOORBELL_FLAGS_PACKET_END UINT32_C(0x40)
+ /*
+ * If set to 1, the device will not generate a completion for this
+ * transmit packet unless there is an error in it's processing. If this
+ * bit is set to 0, then the packet will be completed normally. This bit
+ * must be valid only on the first BD of a packet.
+ */
+ #define PUSH32_DOORBELL_FLAGS_NO_CMPL UINT32_C(0x80)
+ /*
+ * This value must match the sz field in the first 32b of the push
+ * operation except that if 16x16B BD locations are consumed in the ring
+ * by this packet, then this value must be 16 (not zero).
+ */
+ #define PUSH32_DOORBELL_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
+ #define PUSH32_DOORBELL_FLAGS_BD_CNT_SFT 8
+ /*
+ * This value is a hint for the length of the entire packet. It is used
+ * by the chip to optimize internal processing. The packet will be
+ * dropped if the hint is too short. This field is valid only on the
+ * first BD of a packet.
+ */
+ #define PUSH32_DOORBELL_FLAGS_LHINT_MASK UINT32_C(0x6000)
+ #define PUSH32_DOORBELL_FLAGS_LHINT_SFT 13
+ /* indicates packet length < 512B */
+ #define PUSH32_DOORBELL_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13)
+ /* indicates 512 <= packet length < 1KB */
+ #define PUSH32_DOORBELL_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13)
+ /* indicates 1KB <= packet length < 2KB */
+ #define PUSH32_DOORBELL_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
+ /* indicates packet length >= 2KB */
+ #define PUSH32_DOORBELL_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
+ #define PUSH32_DOORBELL_FLAGS_LHINT_LAST PUSH32_DOORBELL_FLAGS_LHINT_GTE2K
+ /*
+ * If set to 1, the device immediately updates the Send Consumer Index
+ * after the buffer associated with this descriptor has been transferred
+ * via DMA to NIC memory from host memory. An interrupt may or may not
+ * be generated according to the state of the interrupt avoidance
+ * mechanisms. If this bit is set to 0, then the Consumer Index is only
+ * updated as soon as one of the host interrupt coalescing conditions
+ * has been met. This bit must be valid on the first BD of a packet.
+ */
+ #define PUSH32_DOORBELL_FLAGS_COAL_NOW UINT32_C(0x8000)
+ /*
+ * All bits in this field must be valid on the first BD of a packet.
+ * Only the packet_end bit must be valid for the remaining BDs of a
+ * packet.
+ */
+ #define PUSH32_DOORBELL_FLAGS_MASK UINT32_C(0xffc0)
+ #define PUSH32_DOORBELL_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This is the length of the host physical buffer this BD describes in
+ * bytes. This field must be valid on all BDs of a packet.
+ */
+ uint32_t opaque;
+ /*
+ * The opaque data field is pass through to the completion and can be
+ * used for any data that the driver wants to associate with the
+ * transmit BD. This field must be valid on the first BD of a packet.
+ */
+ uint16_t lflags;
+ /*
+ * All bits in this field must be valid on the first BD of a packet.
+ * Their value on other BDs of the packet will be ignored.
+ */
+ /*
+ * If set to 1, the controller replaces the TCP/UPD checksum fields of
+ * normal TCP/UPD checksum, or the inner TCP/UDP checksum field of the
+ * encapsulated TCP/UDP packets with the hardware calculated TCP/UDP
+ * checksum for the packet associated with this descriptor. The flag is
+ * ignored if the LSO flag is set. This bit must be valid on the first
+ * BD of a packet.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1)
+ /*
+ * If set to 1, the controller replaces the IP checksum of the normal
+ * packets, or the inner IP checksum of the encapsulated packets with
+ * the hardware calculated IP checksum for the packet associated with
+ * this descriptor. This bit must be valid on the first BD of a packet.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_IP_CHKSUM UINT32_C(0x2)
+ /*
+ * If set to 1, the controller will not append an Ethernet CRC to the
+ * end of the frame. This bit must be valid on the first BD of a packet.
+ * Packet must be 64B or longer when this flag is set. It is not useful
+ * to use this bit with any form of TX offload such as CSO or LSO. The
+ * intent is that the packet from the host already has a valid Ethernet
+ * CRC on the packet.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_NOCRC UINT32_C(0x4)
+ /*
+ * If set to 1, the device will record the time at which the packet was
+ * actually transmitted at the TX MAC. This bit must be valid on the
+ * first BD of a packet.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_STAMP UINT32_C(0x8)
+ /*
+ * If set to 1, The controller replaces the tunnel IP checksum field
+ * with hardware calculated IP checksum for the IP header of the packet
+ * associated with this descriptor. For outer UDP checksum, global outer
+ * UDP checksum TE_NIC register needs to be enabled. If the global outer
+ * UDP checksum TE_NIC register bit is set, outer UDP checksum will be
+ * calculated for the following cases: 1. Packets with tcp_udp_chksum
+ * flag set to offload checksum for inner packet AND the inner packet is
+ * TCP/UDP. If the inner packet is ICMP for example (non-TCP/UDP), even
+ * if the tcp_udp_chksum is set, the outer UDP checksum will not be
+ * calculated. 2. Packets with lso flag set which implies inner TCP
+ * checksum calculation as part of LSO operation.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_T_IP_CHKSUM UINT32_C(0x10)
+ /*
+ * If set to 1, the device will treat this packet with LSO(Large Send
+ * Offload) processing for both normal or encapsulated packets, which is
+ * a form of TCP segmentation. When this bit is 1, the hdr_size and mss
+ * fields must be valid. The driver doesn't need to set t_ip_chksum,
+ * ip_chksum, and tcp_udp_chksum flags since the controller will replace
+ * the appropriate checksum fields for segmented packets. When this bit
+ * is 1, the hdr_size and mss fields must be valid.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_LSO UINT32_C(0x20)
+ /*
+ * If set to zero when LSO is '1', then the IPID will be treated as a
+ * 16b number and will be wrapped if it exceeds a value of 0xffff. If
+ * set to one when LSO is '1', then the IPID will be treated as a 15b
+ * number and will be wrapped if it exceeds a value 0f 0x7fff.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_IPID_FMT UINT32_C(0x40)
+ /*
+ * If set to zero when LSO is '1', then the IPID of the tunnel IP header
+ * will not be modified during LSO operations. If set to one when LSO is
+ * '1', then the IPID of the tunnel IP header will be incremented for
+ * each subsequent segment of an LSO operation. The flag is ignored if
+ * the LSO packet is a normal (non-tunneled) TCP packet.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_T_IPID UINT32_C(0x80)
+ /*
+ * If set to '1', then the RoCE ICRC will be appended to the packet.
+ * Packet must be a valid RoCE format packet.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_ROCE_CRC UINT32_C(0x100)
+ /*
+ * If set to '1', then the FCoE CRC will be appended to the packet.
+ * Packet must be a valid FCoE format packet.
+ */
+ #define PUSH32_DOORBELL_LFLAGS_FCOE_CRC UINT32_C(0x200)
+ uint16_t hdr_size;
+ /*
+ * When LSO is '1', this field must contain the offset of the TCP
+ * payload from the beginning of the packet in as 16b words. In case of
+ * encapsulated/tunneling packet, this field contains the offset of the
+ * inner TCP payload from beginning of the packet as 16-bit words. This
+ * value must be valid on the first BD of a packet.
+ */
+ #define PUSH32_DOORBELL_HDR_SIZE_MASK UINT32_C(0x1ff)
+ #define PUSH32_DOORBELL_HDR_SIZE_SFT 0
+ uint32_t mss;
+ /*
+ * This is the MSS value that will be used to do the LSO processing. The
+ * value is the length in bytes of the TCP payload for each segment
+ * generated by the LSO operation. This value must be valid on the first
+ * BD of a packet.
+ */
+ #define PUSH32_DOORBELL_MSS_MASK UINT32_C(0x7fff)
+ #define PUSH32_DOORBELL_MSS_SFT 0
+ uint16_t unused_2;
+ uint16_t cfa_action;
+ /*
+ * This value selects a CFA action to perform on the packet. Set this
+ * value to zero if no CFA action is desired. This value must be valid
+ * on the first BD of a packet.
+ */
+ uint32_t cfa_meta;
+ /*
+ * This value is action meta-data that defines CFA edit operations that
+ * are done in addition to any action editing.
+ */
+ /* When key=1, This is the VLAN tag VID value. */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_VID_MASK UINT32_C(0xfff)
+ #define PUSH32_DOORBELL_CFA_META_VLAN_VID_SFT 0
+ /* When key=1, This is the VLAN tag DE value. */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_DE UINT32_C(0x1000)
+ /* When key=1, This is the VLAN tag PRI value. */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000)
+ #define PUSH32_DOORBELL_CFA_META_VLAN_PRI_SFT 13
+ /* When key=1, This is the VLAN tag TPID select value. */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000)
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_SFT 16
+ /* 0x88a8 */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_TPID88A8 (UINT32_C(0x0) << 16)
+ /* 0x8100 */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_TPID8100 (UINT32_C(0x1) << 16)
+ /* 0x9100 */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_TPID9100 (UINT32_C(0x2) << 16)
+ /* 0x9200 */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_TPID9200 (UINT32_C(0x3) << 16)
+ /* 0x9300 */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16)
+ /* Value programmed in CFA VLANTPID register. */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16)
+ #define PUSH32_DOORBELL_CFA_META_VLAN_TPID_LAST PUSH32_DOORBELL_CFA_META_VLAN_TPID_TPIDCFG
+ /* When key=1, This is the VLAN tag TPID select value. */
+ #define PUSH32_DOORBELL_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000)
+ #define PUSH32_DOORBELL_CFA_META_VLAN_RESERVED_SFT 19
+ /*
+ * This field identifies the type of edit to be performed on the packet.
+ * This value must be valid on the first BD of a packet.
+ */
+ #define PUSH32_DOORBELL_CFA_META_KEY_MASK UINT32_C(0xf0000000)
+ #define PUSH32_DOORBELL_CFA_META_KEY_SFT 28
+ /* No editing */
+ #define PUSH32_DOORBELL_CFA_META_KEY_NONE (UINT32_C(0x0) << 28)
+ /*
+ * - meta[17:16] - TPID select value (0 = 0x8100). - meta[15:12]
+ * - PRI/DE value. - meta[11:0] - VID value.
+ */
+ #define PUSH32_DOORBELL_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
+ #define PUSH32_DOORBELL_CFA_META_KEY_LAST PUSH32_DOORBELL_CFA_META_KEY_VLAN_TAG
+ uint32_t data[25];
+ /*
+ * This is the data for the push packet. If the packet data does not fit
+ * in the first pass, data writing can continue at offset 4 of the
+ * doorbell for up to 4 additional passes for a total data size of 512B
+ * maximum.
+ */
+} __attribute__((packed));
+
+/* HW Resource Manager Specification 1.4.0 */
+#define HWRM_VERSION_MAJOR 1
+#define HWRM_VERSION_MINOR 4
+#define HWRM_VERSION_UPDATE 0
+
+#define HWRM_VERSION_STR "1.4.0"
+/*
+ * Following is the signature for HWRM message field that indicates not
+ * applicable (All F's). Need to cast it the size of the field if needed.
+ */
+#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
+#define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */
+#define HWRM_MAX_RESP_LEN (176) /* hwrm_func_qstats */
+#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
+#define HW_HASH_KEY_SIZE 40
+#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
+/*
+ * Description: Port Rx Statistics Formats. The HWRM shall return any
+ * unsupported counter with a value of 0xFFFFFFFF for 32-bit counters and
+ * 0xFFFFFFFFFFFFFFFF for 64-bit counters.
+ */
+/*
+ * Note: The Hardware Resource Manager (HWRM) manages various hardware resources
+ * inside the chip. The HWRM is implemented in firmware, and runs on embedded
+ * processors inside the chip. This firmware service is vital part of the chip.
+ * The chip can not be used by a driver or HWRM client without the HWRM.
+ */
+/* Input (16 bytes) */
+
+struct input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (8 bytes) */
+
+struct output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+} __attribute__((packed));
+
+#define GET_HWRM_REQ_TYPE(x) \
+ ((x) == 0x98 ? "HWRM_CFA_ENCAP_RECORD_FREE": \
+ ((x) == 0x99 ? "HWRM_CFA_NTUPLE_FILTER_ALLOC": \
+ ((x) == 0x90 ? "HWRM_CFA_L2_FILTER_ALLOC": \
+ ((x) == 0x91 ? "HWRM_CFA_L2_FILTER_FREE": \
+ ((x) == 0x92 ? "HWRM_CFA_L2_FILTER_CFG": \
+ ((x) == 0x93 ? "HWRM_CFA_L2_SET_RX_MASK": \
+ ((x) == 0x94 ? "RESERVED3": \
+ ((x) == 0x95 ? "HWRM_CFA_TUNNEL_FILTER_ALLOC": \
+ ((x) == 0x96 ? "HWRM_CFA_TUNNEL_FILTER_FREE": \
+ ((x) == 0x97 ? "HWRM_CFA_ENCAP_RECORD_ALLOC": \
+ ((x) == 0x10 ? "RESERVED1": \
+ ((x) == 0x11 ? "HWRM_FUNC_RESET": \
+ ((x) == 0x12 ? "HWRM_FUNC_GETFID": \
+ ((x) == 0x13 ? "HWRM_FUNC_VF_ALLOC": \
+ ((x) == 0x14 ? "HWRM_FUNC_VF_FREE": \
+ ((x) == 0x15 ? "HWRM_FUNC_QCAPS": \
+ ((x) == 0x16 ? "HWRM_FUNC_QCFG": \
+ ((x) == 0x17 ? "HWRM_FUNC_CFG": \
+ ((x) == 0x18 ? "HWRM_FUNC_QSTATS": \
+ ((x) == 0x19 ? "HWRM_FUNC_CLR_STATS": \
+ ((x) == 0xe0 ? "HWRM_TEMP_MONITOR_QUERY": \
+ ((x) == 0xd3 ? "HWRM_FWD_ASYNC_EVENT_CMPL": \
+ ((x) == 0xd2 ? "HWRM_FWD_RESP": \
+ ((x) == 0x1a ? "HWRM_FUNC_DRV_UNRGTR": \
+ ((x) == 0x1b ? "HWRM_FUNC_VF_RESC_FREE": \
+ ((x) == 0x1c ? "HWRM_FUNC_VF_VNIC_IDS_QUERY": \
+ ((x) == 0x1d ? "HWRM_FUNC_DRV_RGTR": \
+ ((x) == 0x1e ? "HWRM_FUNC_DRV_QVER": \
+ ((x) == 0x1f ? "HWRM_FUNC_BUF_RGTR": \
+ ((x) == 0x9a ? "HWRM_CFA_NTUPLE_FILTER_FREE": \
+ ((x) == 0x9b ? "HWRM_CFA_NTUPLE_FILTER_CFG": \
+ ((x) == 0x9c ? "HWRM_CFA_EM_FLOW_ALLOC": \
+ ((x) == 0x9d ? "HWRM_CFA_EM_FLOW_FREE": \
+ ((x) == 0x9e ? "HWRM_CFA_EM_FLOW_CFG": \
+ ((x) == 0xd1 ? "HWRM_REJECT_FWD_RESP": \
+ ((x) == 0xd0 ? "HWRM_EXEC_FWD_RESP": \
+ ((x) == 0xc8 ? "HWRM_FW_SET_TIME": \
+ ((x) == 0xc9 ? "HWRM_FW_GET_TIME": \
+ ((x) == 0xc0 ? "HWRM_FW_RESET": \
+ ((x) == 0xc1 ? "HWRM_FW_QSTATUS": \
+ ((x) == 0x70 ? "HWRM_VNIC_RSS_COS_LB_CTX_ALLOC": \
+ ((x) == 0x71 ? "HWRM_VNIC_RSS_COS_LB_CTX_FREE": \
+ ((x) == 0xb1 ? "HWRM_STAT_CTX_FREE": \
+ ((x) == 0xb0 ? "HWRM_STAT_CTX_ALLOC": \
+ ((x) == 0xb3 ? "HWRM_STAT_CTX_CLR_STATS": \
+ ((x) == 0xb2 ? "HWRM_STAT_CTX_QUERY": \
+ ((x) == 0xfff6 ? "HWRM_NVM_GET_DEV_INFO": \
+ ((x) == 0x61 ? "HWRM_RING_GRP_FREE": \
+ ((x) == 0x60 ? "HWRM_RING_GRP_ALLOC": \
+ ((x) == 0xf1 ? "HWRM_WOL_FILTER_FREE": \
+ ((x) == 0xf0 ? "HWRM_WOL_FILTER_ALLOC": \
+ ((x) == 0xf3 ? "HWRM_WOL_REASON_QCFG": \
+ ((x) == 0xf2 ? "HWRM_WOL_FILTER_QCFG": \
+ ((x) == 0xa0 ? "HWRM_TUNNEL_DST_PORT_QUERY": \
+ ((x) == 0xa1 ? "HWRM_TUNNEL_DST_PORT_ALLOC": \
+ ((x) == 0xa2 ? "HWRM_TUNNEL_DST_PORT_FREE": \
+ ((x) == 0xfffc ? "HWRM_NVM_RAW_DUMP": \
+ ((x) == 0xfffb ? "HWRM_NVM_GET_DIR_INFO": \
+ ((x) == 0xfffa ? "HWRM_NVM_GET_DIR_ENTRIES": \
+ ((x) == 0xe ? "HWRM_FUNC_BUF_UNRGTR": \
+ ((x) == 0xf ? "HWRM_FUNC_VF_CFG": \
+ ((x) == 0xffff ? "HWRM_NVM_RAW_WRITE_BLK": \
+ ((x) == 0xfffe ? "HWRM_NVM_WRITE": \
+ ((x) == 0xfffd ? "HWRM_NVM_READ": \
+ ((x) == 0x50 ? "HWRM_RING_ALLOC": \
+ ((x) == 0x51 ? "HWRM_RING_FREE": \
+ ((x) == 0x52 ? "HWRM_RING_CMPL_RING_QAGGINT_PARAMS": \
+ ((x) == 0x53 ? "HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS": \
+ ((x) == 0x4a ? "HWRM_VNIC_QCAPS": \
+ ((x) == 0x49 ? "HWRM_VNIC_PLCMODES_QCFG": \
+ ((x) == 0x48 ? "HWRM_VNIC_PLCMODES_CFG": \
+ ((x) == 0x47 ? "HWRM_VNIC_RSS_QCFG": \
+ ((x) == 0x46 ? "HWRM_VNIC_RSS_CFG": \
+ ((x) == 0x45 ? "HWRM_VNIC_TPA_QCFG": \
+ ((x) == 0x44 ? "HWRM_VNIC_TPA_CFG": \
+ ((x) == 0x43 ? "HWRM_VNIC_QCFG": \
+ ((x) == 0x42 ? "HWRM_VNIC_CFG": \
+ ((x) == 0x41 ? "HWRM_VNIC_FREE": \
+ ((x) == 0x40 ? "HWRM_VNIC_ALLOC": \
+ ((x) == 0x0 ? "HWRM_VER_GET": \
+ ((x) == 0xfff9 ? "HWRM_NVM_FIND_DIR_ENTRY": \
+ ((x) == 0xfff8 ? "HWRM_NVM_MOD_DIR_ENTRY": \
+ ((x) == 0xfff7 ? "HWRM_NVM_ERASE_DIR_ENTRY": \
+ ((x) == 0x5e ? "HWRM_RING_RESET": \
+ ((x) == 0xfff5 ? "HWRM_NVM_VERIFY_UPDATE": \
+ ((x) == 0xfff4 ? "HWRM_NVM_MODIFY": \
+ ((x) == 0xfff3 ? "HWRM_NVM_INSTALL_UPDATE": \
+ ((x) == 0x2a ? "HWRM_PORT_PHY_QCAPS": \
+ ((x) == 0x2c ? "HWRM_PORT_PHY_I2C_READ": \
+ ((x) == 0x2b ? "HWRM_PORT_PHY_I2C_WRITE": \
+ ((x) == 0x38 ? "HWRM_QUEUE_PRI2COS_CFG": \
+ ((x) == 0x39 ? "HWRM_QUEUE_COS2BW_QCFG": \
+ ((x) == 0x32 ? "HWRM_QUEUE_CFG": \
+ ((x) == 0x33 ? "HWRM_QUEUE_BUFFERS_QCFG": \
+ ((x) == 0x30 ? "HWRM_QUEUE_QPORTCFG": \
+ ((x) == 0x31 ? "HWRM_QUEUE_QCFG": \
+ ((x) == 0x36 ? "HWRM_QUEUE_PFCENABLE_CFG": \
+ ((x) == 0x37 ? "HWRM_QUEUE_PRI2COS_QCFG": \
+ ((x) == 0x34 ? "HWRM_QUEUE_BUFFERS_CFG": \
+ ((x) == 0x35 ? "HWRM_QUEUE_PFCENABLE_QCFG": \
+ ((x) == 0xff14 ? "HWRM_DBG_DUMP": \
+ ((x) == 0xff12 ? "HWRM_DBG_WRITE_DIRECT": \
+ ((x) == 0xff13 ? "HWRM_DBG_WRITE_INDIRECT": \
+ ((x) == 0xff10 ? "HWRM_DBG_READ_DIRECT": \
+ ((x) == 0xff11 ? "HWRM_DBG_READ_INDIRECT": \
+ ((x) == 0x25 ? "HWRM_PORT_CLR_STATS": \
+ ((x) == 0x24 ? "HWRM_PORT_LPBK_QSTATS": \
+ ((x) == 0x27 ? "HWRM_PORT_PHY_QCFG": \
+ ((x) == 0x26 ? "HWRM_PORT_LPBK_CLR_STATS": \
+ ((x) == 0x21 ? "HWRM_PORT_MAC_CFG": \
+ ((x) == 0x20 ? "HWRM_PORT_PHY_CFG": \
+ ((x) == 0x23 ? "HWRM_PORT_QSTATS": \
+ ((x) == 0x22 ? "HWRM_PORT_TS_QUERY": \
+ ((x) == 0x29 ? "HWRM_PORT_BLINK_LED": \
+ ((x) == 0x28 ? "HWRM_PORT_MAC_QCFG": \
+ ((x) == 0x3a ? "HWRM_QUEUE_COS2BW_CFG": \
+ "Unknown req_type"))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
+
+/* Command numbering (8 bytes) */
+
+struct cmd_nums {
+ uint16_t req_type;
+ /*
+ * This version of the specification defines the commands listed in the
+ * table below. The following are general implementation requirements
+ * for these commands: # All commands listed below that are marked
+ * neither reserved nor experimental shall be implemented by the HWRM. #
+ * A HWRM client compliant to this specification should not use commands
+ * outside of the list below. # A HWRM client compliant to this
+ * specification should not use command numbers marked reserved below. #
+ * A command marked experimental below may not be implemented by the
+ * HWRM. # A command marked experimental may change in the future
+ * version of the HWRM specification. # A command not listed below may
+ * be implemented by the HWRM. The behavior of commands that are not
+ * listed below is outside the scope of this specification.
+ */
+ #define HWRM_VER_GET (UINT32_C(0x0))
+ #define HWRM_FUNC_BUF_UNRGTR (UINT32_C(0xe))
+ /* Experimental */
+ #define HWRM_FUNC_VF_CFG (UINT32_C(0xf))
+ /* Reserved for future use */
+ #define RESERVED1 (UINT32_C(0x10))
+ #define HWRM_FUNC_RESET (UINT32_C(0x11))
+ #define HWRM_FUNC_GETFID (UINT32_C(0x12))
+ #define HWRM_FUNC_VF_ALLOC (UINT32_C(0x13))
+ #define HWRM_FUNC_VF_FREE (UINT32_C(0x14))
+ #define HWRM_FUNC_QCAPS (UINT32_C(0x15))
+ #define HWRM_FUNC_QCFG (UINT32_C(0x16))
+ #define HWRM_FUNC_CFG (UINT32_C(0x17))
+ #define HWRM_FUNC_QSTATS (UINT32_C(0x18))
+ #define HWRM_FUNC_CLR_STATS (UINT32_C(0x19))
+ #define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
+ #define HWRM_FUNC_VF_RESC_FREE (UINT32_C(0x1b))
+ #define HWRM_FUNC_VF_VNIC_IDS_QUERY (UINT32_C(0x1c))
+ #define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
+ #define HWRM_FUNC_DRV_QVER (UINT32_C(0x1e))
+ #define HWRM_FUNC_BUF_RGTR (UINT32_C(0x1f))
+ #define HWRM_PORT_PHY_CFG (UINT32_C(0x20))
+ #define HWRM_PORT_MAC_CFG (UINT32_C(0x21))
+ /* Experimental */
+ #define HWRM_PORT_TS_QUERY (UINT32_C(0x22))
+ #define HWRM_PORT_QSTATS (UINT32_C(0x23))
+ #define HWRM_PORT_LPBK_QSTATS (UINT32_C(0x24))
+ /* Experimental */
+ #define HWRM_PORT_CLR_STATS (UINT32_C(0x25))
+ /* Experimental */
+ #define HWRM_PORT_LPBK_CLR_STATS (UINT32_C(0x26))
+ #define HWRM_PORT_PHY_QCFG (UINT32_C(0x27))
+ /* Experimental */
+ #define HWRM_PORT_MAC_QCFG (UINT32_C(0x28))
+ /* Experimental */
+ #define HWRM_PORT_BLINK_LED (UINT32_C(0x29))
+ /* Experimental */
+ #define HWRM_PORT_PHY_QCAPS (UINT32_C(0x2a))
+ /* Experimental */
+ #define HWRM_PORT_PHY_I2C_WRITE (UINT32_C(0x2b))
+ /* Experimental */
+ #define HWRM_PORT_PHY_I2C_READ (UINT32_C(0x2c))
+ #define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
+ #define HWRM_QUEUE_QCFG (UINT32_C(0x31))
+ #define HWRM_QUEUE_CFG (UINT32_C(0x32))
+ #define HWRM_QUEUE_BUFFERS_QCFG (UINT32_C(0x33))
+ #define HWRM_QUEUE_BUFFERS_CFG (UINT32_C(0x34))
+ /* Experimental */
+ #define HWRM_QUEUE_PFCENABLE_QCFG (UINT32_C(0x35))
+ /* Experimental */
+ #define HWRM_QUEUE_PFCENABLE_CFG (UINT32_C(0x36))
+ /* Experimental */
+ #define HWRM_QUEUE_PRI2COS_QCFG (UINT32_C(0x37))
+ /* Experimental */
+ #define HWRM_QUEUE_PRI2COS_CFG (UINT32_C(0x38))
+ /* Experimental */
+ #define HWRM_QUEUE_COS2BW_QCFG (UINT32_C(0x39))
+ /* Experimental */
+ #define HWRM_QUEUE_COS2BW_CFG (UINT32_C(0x3a))
+ #define HWRM_VNIC_ALLOC (UINT32_C(0x40))
+ #define HWRM_VNIC_FREE (UINT32_C(0x41))
+ #define HWRM_VNIC_CFG (UINT32_C(0x42))
+ /* Experimental */
+ #define HWRM_VNIC_QCFG (UINT32_C(0x43))
+ #define HWRM_VNIC_TPA_CFG (UINT32_C(0x44))
+ /* Experimental */
+ #define HWRM_VNIC_TPA_QCFG (UINT32_C(0x45))
+ #define HWRM_VNIC_RSS_CFG (UINT32_C(0x46))
+ #define HWRM_VNIC_RSS_QCFG (UINT32_C(0x47))
+ #define HWRM_VNIC_PLCMODES_CFG (UINT32_C(0x48))
+ #define HWRM_VNIC_PLCMODES_QCFG (UINT32_C(0x49))
+ /* Experimental */
+ #define HWRM_VNIC_QCAPS (UINT32_C(0x4a))
+ #define HWRM_RING_ALLOC (UINT32_C(0x50))
+ #define HWRM_RING_FREE (UINT32_C(0x51))
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS (UINT32_C(0x52))
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS (UINT32_C(0x53))
+ #define HWRM_RING_RESET (UINT32_C(0x5e))
+ #define HWRM_RING_GRP_ALLOC (UINT32_C(0x60))
+ #define HWRM_RING_GRP_FREE (UINT32_C(0x61))
+ #define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC (UINT32_C(0x70))
+ #define HWRM_VNIC_RSS_COS_LB_CTX_FREE (UINT32_C(0x71))
+ #define HWRM_CFA_L2_FILTER_ALLOC (UINT32_C(0x90))
+ #define HWRM_CFA_L2_FILTER_FREE (UINT32_C(0x91))
+ #define HWRM_CFA_L2_FILTER_CFG (UINT32_C(0x92))
+ #define HWRM_CFA_L2_SET_RX_MASK (UINT32_C(0x93))
+ /* Reserved for future use */
+ #define RESERVED3 (UINT32_C(0x94))
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC (UINT32_C(0x95))
+ #define HWRM_CFA_TUNNEL_FILTER_FREE (UINT32_C(0x96))
+ /* Experimental */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC (UINT32_C(0x97))
+ /* Experimental */
+ #define HWRM_CFA_ENCAP_RECORD_FREE (UINT32_C(0x98))
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC (UINT32_C(0x99))
+ #define HWRM_CFA_NTUPLE_FILTER_FREE (UINT32_C(0x9a))
+ #define HWRM_CFA_NTUPLE_FILTER_CFG (UINT32_C(0x9b))
+ /* Experimental */
+ #define HWRM_CFA_EM_FLOW_ALLOC (UINT32_C(0x9c))
+ /* Experimental */
+ #define HWRM_CFA_EM_FLOW_FREE (UINT32_C(0x9d))
+ /* Experimental */
+ #define HWRM_CFA_EM_FLOW_CFG (UINT32_C(0x9e))
+ #define HWRM_TUNNEL_DST_PORT_QUERY (UINT32_C(0xa0))
+ #define HWRM_TUNNEL_DST_PORT_ALLOC (UINT32_C(0xa1))
+ #define HWRM_TUNNEL_DST_PORT_FREE (UINT32_C(0xa2))
+ #define HWRM_STAT_CTX_ALLOC (UINT32_C(0xb0))
+ #define HWRM_STAT_CTX_FREE (UINT32_C(0xb1))
+ #define HWRM_STAT_CTX_QUERY (UINT32_C(0xb2))
+ #define HWRM_STAT_CTX_CLR_STATS (UINT32_C(0xb3))
+ #define HWRM_FW_RESET (UINT32_C(0xc0))
+ #define HWRM_FW_QSTATUS (UINT32_C(0xc1))
+ /* Experimental */
+ #define HWRM_FW_SET_TIME (UINT32_C(0xc8))
+ /* Experimental */
+ #define HWRM_FW_GET_TIME (UINT32_C(0xc9))
+ #define HWRM_EXEC_FWD_RESP (UINT32_C(0xd0))
+ #define HWRM_REJECT_FWD_RESP (UINT32_C(0xd1))
+ #define HWRM_FWD_RESP (UINT32_C(0xd2))
+ #define HWRM_FWD_ASYNC_EVENT_CMPL (UINT32_C(0xd3))
+ #define HWRM_TEMP_MONITOR_QUERY (UINT32_C(0xe0))
+ /* Experimental */
+ #define HWRM_WOL_FILTER_ALLOC (UINT32_C(0xf0))
+ /* Experimental */
+ #define HWRM_WOL_FILTER_FREE (UINT32_C(0xf1))
+ /* Experimental */
+ #define HWRM_WOL_FILTER_QCFG (UINT32_C(0xf2))
+ /* Experimental */
+ #define HWRM_WOL_REASON_QCFG (UINT32_C(0xf3))
+ /* Experimental */
+ #define HWRM_DBG_READ_DIRECT (UINT32_C(0xff10))
+ /* Experimental */
+ #define HWRM_DBG_READ_INDIRECT (UINT32_C(0xff11))
+ /* Experimental */
+ #define HWRM_DBG_WRITE_DIRECT (UINT32_C(0xff12))
+ /* Experimental */
+ #define HWRM_DBG_WRITE_INDIRECT (UINT32_C(0xff13))
+ #define HWRM_DBG_DUMP (UINT32_C(0xff14))
+ #define HWRM_NVM_INSTALL_UPDATE (UINT32_C(0xfff3))
+ #define HWRM_NVM_MODIFY (UINT32_C(0xfff4))
+ #define HWRM_NVM_VERIFY_UPDATE (UINT32_C(0xfff5))
+ #define HWRM_NVM_GET_DEV_INFO (UINT32_C(0xfff6))
+ #define HWRM_NVM_ERASE_DIR_ENTRY (UINT32_C(0xfff7))
+ #define HWRM_NVM_MOD_DIR_ENTRY (UINT32_C(0xfff8))
+ #define HWRM_NVM_FIND_DIR_ENTRY (UINT32_C(0xfff9))
+ #define HWRM_NVM_GET_DIR_ENTRIES (UINT32_C(0xfffa))
+ #define HWRM_NVM_GET_DIR_INFO (UINT32_C(0xfffb))
+ #define HWRM_NVM_RAW_DUMP (UINT32_C(0xfffc))
+ #define HWRM_NVM_READ (UINT32_C(0xfffd))
+ #define HWRM_NVM_WRITE (UINT32_C(0xfffe))
+ #define HWRM_NVM_RAW_WRITE_BLK (UINT32_C(0xffff))
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+#define GET_HWRM_ERROR_CODE(x) \
+ ((x) == 0xf ? "HWRM_ERROR": \
+ ((x) == 0xffff ? "CMD_NOT_SUPPORTED": \
+ ((x) == 0xfffe ? "UNKNOWN_ERR": \
+ ((x) == 0x4 ? "RESOURCE_ALLOC_ERROR": \
+ ((x) == 0x5 ? "INVALID_FLAGS": \
+ ((x) == 0x6 ? "INVALID_ENABLES": \
+ ((x) == 0x0 ? "SUCCESS": \
+ ((x) == 0x1 ? "FAIL": \
+ ((x) == 0x2 ? "INVALID_PARAMS": \
+ ((x) == 0x3 ? "RESOURCE_ACCESS_DENIED": \
+ "Unknown error_code"))))))))))
+
+/* Return Codes (8 bytes) */
+
+struct ret_codes {
+ uint16_t error_code;
+ /* These are numbers assigned to return/error codes. */
+ /* Request was successfully executed by the HWRM. */
+ #define HWRM_ERR_CODE_SUCCESS (UINT32_C(0x0))
+ /* THe HWRM failed to execute the request. */
+ #define HWRM_ERR_CODE_FAIL (UINT32_C(0x1))
+ /* The request contains invalid argument(s) or input parameters. */
+ #define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2))
+ /*
+ * The requester is not allowed to access the requested
+ * resource. This error code shall be provided in a response to
+ * a request to query or modify an existing resource that is not
+ * accessible by the requester.
+ */
+ #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3))
+ /*
+ * The HWRM is unable to allocate the requested resource. This
+ * code only applies to requests for HWRM resource allocations.
+ */
+ #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR (UINT32_C(0x4))
+ /* Invalid combination of flags is specified in the request. */
+ #define HWRM_ERR_CODE_INVALID_FLAGS (UINT32_C(0x5))
+ /*
+ * Invalid combination of enables fields is specified in the
+ * request.
+ */
+ #define HWRM_ERR_CODE_INVALID_ENABLES (UINT32_C(0x6))
+ /* Generic HWRM execution error that represents an internal error. */
+ #define HWRM_ERR_CODE_HWRM_ERROR (UINT32_C(0xf))
+ /* Unknown error */
+ #define HWRM_ERR_CODE_UNKNOWN_ERR (UINT32_C(0xfffe))
+ /* Unsupported or invalid command */
+ #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED (UINT32_C(0xffff))
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_err_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t opaque_0;
+ /* debug info for this error response. */
+ uint16_t opaque_1;
+ /* debug info for this error response. */
+ uint8_t cmd_err;
+ /*
+ * In the case of an error response, command specific error code is
+ * returned in this field.
+ */
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* Port Tx Statistics Formats (408 bytes) */
+
+struct tx_port_stats {
+ uint64_t tx_64b_frames;
+ /* Total Number of 64 Bytes frames transmitted */
+ uint64_t tx_65b_127b_frames;
+ /* Total Number of 65-127 Bytes frames transmitted */
+ uint64_t tx_128b_255b_frames;
+ /* Total Number of 128-255 Bytes frames transmitted */
+ uint64_t tx_256b_511b_frames;
+ /* Total Number of 256-511 Bytes frames transmitted */
+ uint64_t tx_512b_1023b_frames;
+ /* Total Number of 512-1023 Bytes frames transmitted */
+ uint64_t tx_1024b_1518_frames;
+ /* Total Number of 1024-1518 Bytes frames transmitted */
+ uint64_t tx_good_vlan_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors) frame transmitted
+ * which is 1519 to 1522 bytes in length inclusive (excluding framing
+ * bits but including FCS bytes).
+ */
+ uint64_t tx_1519b_2047_frames;
+ /* Total Number of 1519-2047 Bytes frames transmitted */
+ uint64_t tx_2048b_4095b_frames;
+ /* Total Number of 2048-4095 Bytes frames transmitted */
+ uint64_t tx_4096b_9216b_frames;
+ /* Total Number of 4096-9216 Bytes frames transmitted */
+ uint64_t tx_9217b_16383b_frames;
+ /* Total Number of 9217-16383 Bytes frames transmitted */
+ uint64_t tx_good_frames;
+ /* Total Number of good frames transmitted */
+ uint64_t tx_total_frames;
+ /* Total Number of frames transmitted */
+ uint64_t tx_ucast_frames;
+ /* Total number of unicast frames transmitted */
+ uint64_t tx_mcast_frames;
+ /* Total number of multicast frames transmitted */
+ uint64_t tx_bcast_frames;
+ /* Total number of broadcast frames transmitted */
+ uint64_t tx_pause_frames;
+ /* Total number of PAUSE control frames transmitted */
+ uint64_t tx_pfc_frames;
+ /* Total number of PFC/per-priority PAUSE control frames transmitted */
+ uint64_t tx_jabber_frames;
+ /* Total number of jabber frames transmitted */
+ uint64_t tx_fcs_err_frames;
+ /* Total number of frames transmitted with FCS error */
+ uint64_t tx_control_frames;
+ /* Total number of control frames transmitted */
+ uint64_t tx_oversz_frames;
+ /* Total number of over-sized frames transmitted */
+ uint64_t tx_single_dfrl_frames;
+ /* Total number of frames with single deferral */
+ uint64_t tx_multi_dfrl_frames;
+ /* Total number of frames with multiple deferrals */
+ uint64_t tx_single_coll_frames;
+ /* Total number of frames with single collision */
+ uint64_t tx_multi_coll_frames;
+ /* Total number of frames with multiple collisions */
+ uint64_t tx_late_coll_frames;
+ /* Total number of frames with late collisions */
+ uint64_t tx_excessive_coll_frames;
+ /* Total number of frames with excessive collisions */
+ uint64_t tx_frag_frames;
+ /* Total number of fragmented frames transmitted */
+ uint64_t tx_err;
+ /* Total number of transmit errors */
+ uint64_t tx_tagged_frames;
+ /* Total number of single VLAN tagged frames transmitted */
+ uint64_t tx_dbl_tagged_frames;
+ /* Total number of double VLAN tagged frames transmitted */
+ uint64_t tx_runt_frames;
+ /* Total number of runt frames transmitted */
+ uint64_t tx_fifo_underruns;
+ /* Total number of TX FIFO under runs */
+ uint64_t tx_pfc_ena_frames_pri0;
+ /* Total number of PFC frames with PFC enabled bit for Pri 0 transmitted */
+ uint64_t tx_pfc_ena_frames_pri1;
+ /* Total number of PFC frames with PFC enabled bit for Pri 1 transmitted */
+ uint64_t tx_pfc_ena_frames_pri2;
+ /* Total number of PFC frames with PFC enabled bit for Pri 2 transmitted */
+ uint64_t tx_pfc_ena_frames_pri3;
+ /* Total number of PFC frames with PFC enabled bit for Pri 3 transmitted */
+ uint64_t tx_pfc_ena_frames_pri4;
+ /* Total number of PFC frames with PFC enabled bit for Pri 4 transmitted */
+ uint64_t tx_pfc_ena_frames_pri5;
+ /* Total number of PFC frames with PFC enabled bit for Pri 5 transmitted */
+ uint64_t tx_pfc_ena_frames_pri6;
+ /* Total number of PFC frames with PFC enabled bit for Pri 6 transmitted */
+ uint64_t tx_pfc_ena_frames_pri7;
+ /* Total number of PFC frames with PFC enabled bit for Pri 7 transmitted */
+ uint64_t tx_eee_lpi_events;
+ /* Total number of EEE LPI Events on TX */
+ uint64_t tx_eee_lpi_duration;
+ /* EEE LPI Duration Counter on TX */
+ uint64_t tx_llfc_logical_msgs;
+ /* Total number of Link Level Flow Control (LLFC) messages transmitted */
+ uint64_t tx_hcfc_msgs;
+ /* Total number of HCFC messages transmitted */
+ uint64_t tx_total_collisions;
+ /* Total number of TX collisions */
+ uint64_t tx_bytes;
+ /* Total number of transmitted bytes */
+ uint64_t tx_xthol_frames;
+ /* Total number of end-to-end HOL frames */
+ uint64_t tx_stat_discard;
+ /* Total Tx Drops per Port reported by STATS block */
+ uint64_t tx_stat_error;
+ /* Total Tx Error Drops per Port reported by STATS block */
+} __attribute__((packed));
+
+/* Port Rx Statistics Formats (528 bytes) */
+
+struct rx_port_stats {
+ uint64_t rx_64b_frames;
+ /* Total Number of 64 Bytes frames received */
+ uint64_t rx_65b_127b_frames;
+ /* Total Number of 65-127 Bytes frames received */
+ uint64_t rx_128b_255b_frames;
+ /* Total Number of 128-255 Bytes frames received */
+ uint64_t rx_256b_511b_frames;
+ /* Total Number of 256-511 Bytes frames received */
+ uint64_t rx_512b_1023b_frames;
+ /* Total Number of 512-1023 Bytes frames received */
+ uint64_t rx_1024b_1518_frames;
+ /* Total Number of 1024-1518 Bytes frames received */
+ uint64_t rx_good_vlan_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors) frame received
+ * which is 1519 to 1522 bytes in length inclusive (excluding framing
+ * bits but including FCS bytes).
+ */
+ uint64_t rx_1519b_2047b_frames;
+ /* Total Number of 1519-2047 Bytes frames received */
+ uint64_t rx_2048b_4095b_frames;
+ /* Total Number of 2048-4095 Bytes frames received */
+ uint64_t rx_4096b_9216b_frames;
+ /* Total Number of 4096-9216 Bytes frames received */
+ uint64_t rx_9217b_16383b_frames;
+ /* Total Number of 9217-16383 Bytes frames received */
+ uint64_t rx_total_frames;
+ /* Total number of frames received */
+ uint64_t rx_ucast_frames;
+ /* Total number of unicast frames received */
+ uint64_t rx_mcast_frames;
+ /* Total number of multicast frames received */
+ uint64_t rx_bcast_frames;
+ /* Total number of broadcast frames received */
+ uint64_t rx_fcs_err_frames;
+ /* Total number of received frames with FCS error */
+ uint64_t rx_ctrl_frames;
+ /* Total number of control frames received */
+ uint64_t rx_pause_frames;
+ /* Total number of PAUSE frames received */
+ uint64_t rx_pfc_frames;
+ /* Total number of PFC frames received */
+ uint64_t rx_unsupported_opcode_frames;
+ /* Total number of frames received with an unsupported opcode */
+ uint64_t rx_unsupported_da_pausepfc_frames;
+ /*
+ * Total number of frames received with an unsupported DA for pause and
+ * PFC
+ */
+ uint64_t rx_wrong_sa_frames;
+ /* Total number of frames received with an unsupported SA */
+ uint64_t rx_align_err_frames;
+ /* Total number of received packets with alignment error */
+ uint64_t rx_oor_len_frames;
+ /* Total number of received frames with out-of-range length */
+ uint64_t rx_code_err_frames;
+ /* Total number of received frames with error termination */
+ uint64_t rx_false_carrier_frames;
+ /*
+ * Total number of received frames with a false carrier is detected
+ * during idle, as defined by RX_ER samples active and RXD is 0xE. The
+ * event is reported along with the statistics generated on the next
+ * received frame. Only one false carrier condition can be detected and
+ * logged between frames. Carrier event, valid for 10M/100M speed modes
+ * only.
+ */
+ uint64_t rx_ovrsz_frames;
+ /* Total number of over-sized frames received */
+ uint64_t rx_jbr_frames;
+ /* Total number of jabber packets received */
+ uint64_t rx_mtu_err_frames;
+ /* Total number of received frames with MTU error */
+ uint64_t rx_match_crc_frames;
+ /* Total number of received frames with CRC match */
+ uint64_t rx_promiscuous_frames;
+ /* Total number of frames received promiscuously */
+ uint64_t rx_tagged_frames;
+ /* Total number of received frames with one or two VLAN tags */
+ uint64_t rx_double_tagged_frames;
+ /* Total number of received frames with two VLAN tags */
+ uint64_t rx_trunc_frames;
+ /* Total number of truncated frames received */
+ uint64_t rx_good_frames;
+ /* Total number of good frames (without errors) received */
+ uint64_t rx_pfc_xon2xoff_frames_pri0;
+ /*
+ * Total number of received PFC frames with transition from XON to XOFF
+ * on Pri 0
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri1;
+ /*
+ * Total number of received PFC frames with transition from XON to XOFF
+ * on Pri 1
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri2;
+ /*
+ * Total number of received PFC frames with transition from XON to XOFF
+ * on Pri 2
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri3;
+ /*
+ * Total number of received PFC frames with transition from XON to XOFF
+ * on Pri 3
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri4;
+ /*
+ * Total number of received PFC frames with transition from XON to XOFF
+ * on Pri 4
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri5;
+ /*
+ * Total number of received PFC frames with transition from XON to XOFF
+ * on Pri 5
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri6;
+ /*
+ * Total number of received PFC frames with transition from XON to XOFF
+ * on Pri 6
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri7;
+ /*
+ * Total number of received PFC frames with transition from XON to XOFF
+ * on Pri 7
+ */
+ uint64_t rx_pfc_ena_frames_pri0;
+ /* Total number of received PFC frames with PFC enabled bit for Pri 0 */
+ uint64_t rx_pfc_ena_frames_pri1;
+ /* Total number of received PFC frames with PFC enabled bit for Pri 1 */
+ uint64_t rx_pfc_ena_frames_pri2;
+ /* Total number of received PFC frames with PFC enabled bit for Pri 2 */
+ uint64_t rx_pfc_ena_frames_pri3;
+ /* Total number of received PFC frames with PFC enabled bit for Pri 3 */
+ uint64_t rx_pfc_ena_frames_pri4;
+ /* Total number of received PFC frames with PFC enabled bit for Pri 4 */
+ uint64_t rx_pfc_ena_frames_pri5;
+ /* Total number of received PFC frames with PFC enabled bit for Pri 5 */
+ uint64_t rx_pfc_ena_frames_pri6;
+ /* Total number of received PFC frames with PFC enabled bit for Pri 6 */
+ uint64_t rx_pfc_ena_frames_pri7;
+ /* Total number of received PFC frames with PFC enabled bit for Pri 7 */
+ uint64_t rx_sch_crc_err_frames;
+ /* Total Number of frames received with SCH CRC error */
+ uint64_t rx_undrsz_frames;
+ /* Total Number of under-sized frames received */
+ uint64_t rx_frag_frames;
+ /* Total Number of fragmented frames received */
+ uint64_t rx_eee_lpi_events;
+ /* Total number of RX EEE LPI Events */
+ uint64_t rx_eee_lpi_duration;
+ /* EEE LPI Duration Counter on RX */
+ uint64_t rx_llfc_physical_msgs;
+ /*
+ * Total number of physical type Link Level Flow Control (LLFC) messages
+ * received
+ */
+ uint64_t rx_llfc_logical_msgs;
+ /*
+ * Total number of logical type Link Level Flow Control (LLFC) messages
+ * received
+ */
+ uint64_t rx_llfc_msgs_with_crc_err;
+ /*
+ * Total number of logical type Link Level Flow Control (LLFC) messages
+ * received with CRC error
+ */
+ uint64_t rx_hcfc_msgs;
+ /* Total number of HCFC messages received */
+ uint64_t rx_hcfc_msgs_with_crc_err;
+ /* Total number of HCFC messages received with CRC error */
+ uint64_t rx_bytes;
+ /* Total number of received bytes */
+ uint64_t rx_runt_bytes;
+ /* Total number of bytes received in runt frames */
+ uint64_t rx_runt_frames;
+ /* Total number of runt frames received */
+ uint64_t rx_stat_discard;
+ /* Total Rx Discards per Port reported by STATS block */
+ uint64_t rx_stat_err;
+ /* Total Rx Error Drops per Port reported by STATS block */
+} __attribute__((packed));
+
+/* hwrm_ver_get */
+/*
+ * Description: This function is called by a driver to determine the HWRM
+ * interface version supported by the HWRM firmware, the version of HWRM
+ * firmware implementation, the name of HWRM firmware, the versions of other
+ * embedded firmwares, and the names of other embedded firmwares, etc. Any
+ * interface or firmware version with major = 0, minor = 0, and update = 0 shall
+ * be considered an invalid version.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_ver_get_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint8_t hwrm_intf_maj;
+ /*
+ * This field represents the major version of HWRM interface
+ * specification supported by the driver HWRM implementation. The
+ * interface major version is intended to change only when non backward
+ * compatible changes are made to the HWRM interface specification.
+ */
+ uint8_t hwrm_intf_min;
+ /*
+ * This field represents the minor version of HWRM interface
+ * specification supported by the driver HWRM implementation. A change
+ * in interface minor version is used to reflect significant backward
+ * compatible modification to HWRM interface specification. This can be
+ * due to addition or removal of functionality. HWRM interface
+ * specifications with the same major version but different minor
+ * versions are compatible.
+ */
+ uint8_t hwrm_intf_upd;
+ /*
+ * This field represents the update version of HWRM interface
+ * specification supported by the driver HWRM implementation. The
+ * interface update version is used to reflect minor changes or bug
+ * fixes to a released HWRM interface specification.
+ */
+ uint8_t unused_0[5];
+} __attribute__((packed));
+
+/* Output (128 bytes) */
+
+struct hwrm_ver_get_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t hwrm_intf_maj;
+ /*
+ * This field represents the major version of HWRM interface
+ * specification supported by the HWRM implementation. The interface
+ * major version is intended to change only when non backward compatible
+ * changes are made to the HWRM interface specification. A HWRM
+ * implementation that is compliant with this specification shall
+ * provide value of 1 in this field.
+ */
+ uint8_t hwrm_intf_min;
+ /*
+ * This field represents the minor version of HWRM interface
+ * specification supported by the HWRM implementation. A change in
+ * interface minor version is used to reflect significant backward
+ * compatible modification to HWRM interface specification. This can be
+ * due to addition or removal of functionality. HWRM interface
+ * specifications with the same major version but different minor
+ * versions are compatible. A HWRM implementation that is compliant with
+ * this specification shall provide value of 2 in this field.
+ */
+ uint8_t hwrm_intf_upd;
+ /*
+ * This field represents the update version of HWRM interface
+ * specification supported by the HWRM implementation. The interface
+ * update version is used to reflect minor changes or bug fixes to a
+ * released HWRM interface specification. A HWRM implementation that is
+ * compliant with this specification shall provide value of 2 in this
+ * field.
+ */
+ uint8_t hwrm_intf_rsvd;
+ uint8_t hwrm_fw_maj;
+ /*
+ * This field represents the major version of HWRM firmware. A change in
+ * firmware major version represents a major firmware release.
+ */
+ uint8_t hwrm_fw_min;
+ /*
+ * This field represents the minor version of HWRM firmware. A change in
+ * firmware minor version represents significant firmware functionality
+ * changes.
+ */
+ uint8_t hwrm_fw_bld;
+ /*
+ * This field represents the build version of HWRM firmware. A change in
+ * firmware build version represents bug fixes to a released firmware.
+ */
+ uint8_t hwrm_fw_rsvd;
+ /*
+ * This field is a reserved field. This field can be used to represent
+ * firmware branches or customer specific releases tied to a specific
+ * (major,minor,update) version of the HWRM firmware.
+ */
+ uint8_t mgmt_fw_maj;
+ /*
+ * This field represents the major version of mgmt firmware. A change in
+ * major version represents a major release.
+ */
+ uint8_t mgmt_fw_min;
+ /*
+ * This field represents the minor version of mgmt firmware. A change in
+ * minor version represents significant functionality changes.
+ */
+ uint8_t mgmt_fw_bld;
+ /*
+ * This field represents the build version of mgmt firmware. A change in
+ * update version represents bug fixes.
+ */
+ uint8_t mgmt_fw_rsvd;
+ /*
+ * This field is a reserved field. This field can be used to represent
+ * firmware branches or customer specific releases tied to a specific
+ * (major,minor,update) version
+ */
+ uint8_t netctrl_fw_maj;
+ /*
+ * This field represents the major version of network control firmware.
+ * A change in major version represents a major release.
+ */
+ uint8_t netctrl_fw_min;
+ /*
+ * This field represents the minor version of network control firmware.
+ * A change in minor version represents significant functionality
+ * changes.
+ */
+ uint8_t netctrl_fw_bld;
+ /*
+ * This field represents the build version of network control firmware.
+ * A change in update version represents bug fixes.
+ */
+ uint8_t netctrl_fw_rsvd;
+ /*
+ * This field is a reserved field. This field can be used to represent
+ * firmware branches or customer specific releases tied to a specific
+ * (major,minor,update) version
+ */
+ uint32_t reserved1;
+ /*
+ * This field is reserved for future use. The responder should set it to
+ * 0. The requester should ignore this field.
+ */
+ uint8_t roce_fw_maj;
+ /*
+ * This field represents the major version of RoCE firmware. A change in
+ * major version represents a major release.
+ */
+ uint8_t roce_fw_min;
+ /*
+ * This field represents the minor version of RoCE firmware. A change in
+ * minor version represents significant functionality changes.
+ */
+ uint8_t roce_fw_bld;
+ /*
+ * This field represents the build version of RoCE firmware. A change in
+ * update version represents bug fixes.
+ */
+ uint8_t roce_fw_rsvd;
+ /*
+ * This field is a reserved field. This field can be used to represent
+ * firmware branches or customer specific releases tied to a specific
+ * (major,minor,update) version
+ */
+ char hwrm_fw_name[16];
+ /*
+ * This field represents the name of HWRM FW (ASCII chars with NULL at
+ * the end).
+ */
+ char mgmt_fw_name[16];
+ /*
+ * This field represents the name of mgmt FW (ASCII chars with NULL at
+ * the end).
+ */
+ char netctrl_fw_name[16];
+ /*
+ * This field represents the name of network control firmware (ASCII
+ * chars with NULL at the end).
+ */
+ uint32_t reserved2[4];
+ /*
+ * This field is reserved for future use. The responder should set it to
+ * 0. The requester should ignore this field.
+ */
+ char roce_fw_name[16];
+ /*
+ * This field represents the name of RoCE FW (ASCII chars with NULL at
+ * the end).
+ */
+ uint16_t chip_num;
+ /* This field returns the chip number. */
+ uint8_t chip_rev;
+ /* This field returns the revision of chip. */
+ uint8_t chip_metal;
+ /* This field returns the chip metal number. */
+ uint8_t chip_bond_id;
+ /* This field returns the bond id of the chip. */
+ uint8_t chip_platform_type;
+ /*
+ * This value indicates the type of platform used for chip
+ * implementation.
+ */
+ /* ASIC */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC UINT32_C(0x0)
+ /* FPGA platform of the chip. */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA UINT32_C(0x1)
+ /* Palladium platform of the chip. */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2)
+ uint16_t max_req_win_len;
+ /*
+ * This field returns the maximum value of request window that is
+ * supported by the HWRM. The request window is mapped into device
+ * address space using MMIO.
+ */
+ uint16_t max_resp_len;
+ /* This field returns the maximum value of response buffer in bytes. */
+ uint16_t def_req_timeout;
+ /* This field returns the default request timeout value in milliseconds. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_reset */
+/*
+ * Description: This command resets a hardware function (PCIe function) and
+ * frees any resources used by the function. This command shall be initiated by
+ * the driver after an FLR has occurred to prepare the function for re-use. This
+ * command may also be initiated by a driver prior to doing it's own
+ * configuration. This command puts the function into the reset state. In the
+ * reset state, global and port related features of the chip are not available.
+ */
+/*
+ * Note: This command will reset a function that has already been disabled or
+ * idled. The command returns all the resources owned by the function so a new
+ * driver may allocate and configure resources normally.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_reset_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id_valid field to be configured. */
+ #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ uint16_t vf_id;
+ /*
+ * The ID of the VF that this PF is trying to reset. Only the parent PF
+ * shall be allowed to reset a child VF. A parent PF driver shall use
+ * this field only when a specific child VF is requested to be reset.
+ */
+ uint8_t func_reset_level;
+ /* This value indicates the level of a function reset. */
+ /*
+ * Reset the caller function and its children VFs (if any). If
+ * no children functions exist, then reset the caller function
+ * only.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL UINT32_C(0x0)
+ /* Reset the caller function only */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME UINT32_C(0x1)
+ /*
+ * Reset all children VFs of the caller function driver if the
+ * caller is a PF driver. It is an error to specify this level
+ * by a VF driver. It is an error to specify this level by a PF
+ * driver with no children VFs.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN UINT32_C(0x2)
+ /*
+ * Reset a specific VF of the caller function driver if the
+ * caller is the parent PF driver. It is an error to specify
+ * this level by a VF driver. It is an error to specify this
+ * level by a PF driver that is not the parent of the VF that is
+ * being requested to reset.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF UINT32_C(0x3)
+ uint8_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_reset_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_getfid */
+/*
+ * Description: This command returns the FID value for the function. If a valid
+ * pci_id is provided, then this function returns fid for that PCI function.
+ * Otherwise, it returns FID of the requesting function. This value is needed to
+ * configure Rings and MSI-X vectors so their DMA operations appear correctly on
+ * the PCI bus. For PF-HWRM commands, there is no need for FID. Similarly there
+ * is no need for FID for VF-HWRM commands. In the PF-VF communication, only PF
+ * needs to know FIDs.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_getfid_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the pci_id field to be configured. */
+ #define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID UINT32_C(0x1)
+ uint16_t pci_id;
+ /*
+ * This value is the PCI ID of the queried function. If ARI is enabled,
+ * then it is Bus Number (8b):Function Number(8b). Otherwise, it is Bus
+ * Number (8b):Device Number (4b):Function Number(4b).
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_getfid_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t fid;
+ /*
+ * FID value. This value is used to identify operations on the PCI bus
+ * as belonging to a particular PCI function.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_vf_alloc */
+/*
+ * Description: This command is used to allocate requested number of virtual
+ * functions on a physical function. It will return the FID value of the first
+ * virtual function. The FIDs of the remaining virtual functions can be derived
+ * by sequentially incrementing the FID value of the first VF. This command
+ * supports the following models for VF allocation: # Allocation of one or more
+ * VFs from a PF without specifying the first VF ID # Allocation of multiple VFs
+ * from a PF starting with a specific VF # Allocation of a specific VF from a PF
+ * If this command is called on a virtual function or a physical function that
+ * is not enabled for SR-IOV, the HWRM shall return an error. The VF IDs
+ * returned by this function remain valid after the VF is disabled or reset.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_vf_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the first_vf_id field to be configured. */
+ #define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1)
+ uint16_t first_vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint16_t num_vfs;
+ /* The number of virtual functions requested. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_vf_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t first_vf_id;
+ /* The ID of the first VF allocated. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_vf_free */
+/*
+ * Description: This command will free allocated virtual functions on a physical
+ * function. If this command is called on a virtual function or a physical
+ * function that is not enabled for SR-IOV, the HWRM shall return an error.
+ * After the successful completion of this command, the VF IDs of the VFs that
+ * are freed on the PF are invalid.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_vf_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the first_vf_id field to be configured. */
+ #define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1)
+ uint16_t first_vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint16_t num_vfs;
+ /*
+ * The number of virtual functions requested. 0xFFFF - Cleanup all
+ * children of this PF.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_vf_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_vf_cfg */
+/*
+ * Description: This command allows configuration of a VF by its driver. If this
+ * function is called by a PF driver, then the HWRM shall fail this command. If
+ * guest VLAN and/or MAC address are provided in this command, then the HWRM
+ * shall set up appropriate MAC/VLAN filters for the VF that is being
+ * configured. A VF driver should set VF MTU/MRU using this command prior to
+ * allocating RX VNICs or TX rings for the corresponding VF.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_func_vf_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the mtu field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
+ /* This bit must be '1' for the guest_vlan field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN UINT32_C(0x2)
+ /* This bit must be '1' for the async_event_cr field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4)
+ /* This bit must be '1' for the dflt_mac_addr field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x8)
+ uint16_t mtu;
+ /*
+ * The maximum transmission unit requested on the function. The HWRM
+ * should make sure that the mtu of the function does not exceed the mtu
+ * of the physical port that this function is associated with. In
+ * addition to requesting mtu per function, it is possible to configure
+ * mtu per transmit ring. By default, the mtu of each transmit ring
+ * associated with a function is equal to the mtu of the function. The
+ * HWRM should make sure that the mtu of each transmit ring that is
+ * assigned to a function has a valid mtu.
+ */
+ uint16_t guest_vlan;
+ /*
+ * The guest VLAN for the function being configured. This field's format
+ * is same as 802.1Q Tag's Tag Control Information (TCI) format that
+ * includes both Priority Code Point (PCP) and VLAN Identifier (VID).
+ */
+ uint16_t async_event_cr;
+ /*
+ * ID of the target completion ring for receiving asynchronous event
+ * completions. If this field is not valid, then the HWRM shall use the
+ * default completion ring of the function that is being configured as
+ * the target completion ring for providing any asynchronous event
+ * completions for that function. If this field is valid, then the HWRM
+ * shall use the completion ring identified by this ID as the target
+ * completion ring for providing any asynchronous event completions for
+ * the function that is being configured.
+ */
+ uint8_t dflt_mac_addr[6];
+ /*
+ * This value is the current MAC address requested by the VF driver to
+ * be configured on this VF. A value of 00-00-00-00-00-00 indicates no
+ * MAC address configuration is requested by the VF driver. The parent
+ * PF driver may reject or overwrite this MAC address.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_vf_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_qcaps */
+/*
+ * Description: This command returns capabilities of a function. The input FID
+ * value is used to indicate what function is being queried. This allows a
+ * physical function driver to query virtual functions that are children of the
+ * physical function. The output FID value is needed to configure Rings and
+ * MSI-X vectors so their DMA operations appear correctly on the PCI bus.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_qcaps_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being queried. 0xFF... (All Fs)
+ * if the query is for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (80 bytes) */
+
+struct hwrm_func_qcaps_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t fid;
+ /*
+ * FID value. This value is used to identify operations on the PCI bus
+ * as belonging to a particular PCI function.
+ */
+ uint16_t port_id;
+ /*
+ * Port ID of port that this function is associated with. Valid only for
+ * the PF. 0xFF... (All Fs) if this function is not associated with any
+ * port. 0xFF... (All Fs) if this function is called from a VF.
+ */
+ uint32_t flags;
+ /* If 1, then Push mode is supported on this function. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
+ /* If 1, then the global MSI-X auto-masking is enabled for the device. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING UINT32_C(0x2)
+ /*
+ * If 1, then the Precision Time Protocol (PTP) processing is supported
+ * on this function. The HWRM should enable PTP on only a single
+ * Physical Function (PF) per port.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
+ /*
+ * If 1, then RDMA over Converged Ethernet (RoCE) v1 is supported on
+ * this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
+ /*
+ * If 1, then RDMA over Converged Ethernet (RoCE) v2 is supported on
+ * this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
+ /*
+ * If 1, then control and configuration of WoL magic packet is supported
+ * on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED UINT32_C(0x20)
+ /*
+ * If 1, then control and configuration of bitmap pattern packet is
+ * supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
+ uint8_t mac_address[6];
+ /*
+ * This value is current MAC address configured for this function. A
+ * value of 00-00-00-00-00-00 indicates no MAC address is currently
+ * configured.
+ */
+ uint16_t max_rsscos_ctx;
+ /*
+ * The maximum number of RSS/COS contexts that can be allocated to the
+ * function.
+ */
+ uint16_t max_cmpl_rings;
+ /*
+ * The maximum number of completion rings that can be allocated to the
+ * function.
+ */
+ uint16_t max_tx_rings;
+ /*
+ * The maximum number of transmit rings that can be allocated to the
+ * function.
+ */
+ uint16_t max_rx_rings;
+ /*
+ * The maximum number of receive rings that can be allocated to the
+ * function.
+ */
+ uint16_t max_l2_ctxs;
+ /*
+ * The maximum number of L2 contexts that can be allocated to the
+ * function.
+ */
+ uint16_t max_vnics;
+ /* The maximum number of VNICs that can be allocated to the function. */
+ uint16_t first_vf_id;
+ /*
+ * The identifier for the first VF enabled on a PF. This is valid only
+ * on the PF with SR-IOV enabled. 0xFF... (All Fs) if this command is
+ * called on a PF with SR-IOV disabled or on a VF.
+ */
+ uint16_t max_vfs;
+ /*
+ * The maximum number of VFs that can be allocated to the function. This
+ * is valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if this
+ * command is called on a PF with SR-IOV disabled or on a VF.
+ */
+ uint16_t max_stat_ctx;
+ /*
+ * The maximum number of statistic contexts that can be allocated to the
+ * function.
+ */
+ uint32_t max_encap_records;
+ /*
+ * The maximum number of Encapsulation records that can be offloaded by
+ * this function.
+ */
+ uint32_t max_decap_records;
+ /*
+ * The maximum number of decapsulation records that can be offloaded by
+ * this function.
+ */
+ uint32_t max_tx_em_flows;
+ /*
+ * The maximum number of Exact Match (EM) flows that can be offloaded by
+ * this function on the TX side.
+ */
+ uint32_t max_tx_wm_flows;
+ /*
+ * The maximum number of Wildcard Match (WM) flows that can be offloaded
+ * by this function on the TX side.
+ */
+ uint32_t max_rx_em_flows;
+ /*
+ * The maximum number of Exact Match (EM) flows that can be offloaded by
+ * this function on the RX side.
+ */
+ uint32_t max_rx_wm_flows;
+ /*
+ * The maximum number of Wildcard Match (WM) flows that can be offloaded
+ * by this function on the RX side.
+ */
+ uint32_t max_mcast_filters;
+ /*
+ * The maximum number of multicast filters that can be supported by this
+ * function on the RX side.
+ */
+ uint32_t max_flow_id;
+ /*
+ * The maximum value of flow_id that can be supported in completion
+ * records.
+ */
+ uint32_t max_hw_ring_grps;
+ /*
+ * The maximum number of HW ring groups that can be supported on this
+ * function.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_qcfg */
+/*
+ * Description: This command returns the current configuration of a function.
+ * The input FID value is used to indicate what function is being queried. This
+ * allows a physical function driver to query virtual functions that are
+ * children of the physical function. The output FID value is needed to
+ * configure Rings and MSI-X vectors so their DMA operations appear correctly on
+ * the PCI bus.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being queried. 0xFF... (All Fs)
+ * if the query is for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (72 bytes) */
+
+struct hwrm_func_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t fid;
+ /*
+ * FID value. This value is used to identify operations on the PCI bus
+ * as belonging to a particular PCI function.
+ */
+ uint16_t port_id;
+ /*
+ * Port ID of port that this function is associated with. 0xFF... (All
+ * Fs) if this function is not associated with any port.
+ */
+ uint16_t vlan;
+ /*
+ * This value is the current VLAN setting for this function. The value
+ * of 0 for this field indicates no priority tagging or VLAN is used.
+ * This field's format is same as 802.1Q Tag's Tag Control Information
+ * (TCI) format that includes both Priority Code Point (PCP) and VLAN
+ * Identifier (VID).
+ */
+ uint16_t flags;
+ /*
+ * If 1, then magic packet based Out-Of-Box WoL is enabled on the port
+ * associated with this function.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED UINT32_C(0x1)
+ /*
+ * If 1, then bitmap pattern based Out-Of-Box WoL packet is enabled on
+ * the port associated with this function.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED UINT32_C(0x2)
+ uint8_t mac_address[6];
+ /*
+ * This value is current MAC address configured for this function. A
+ * value of 00-00-00-00-00-00 indicates no MAC address is currently
+ * configured.
+ */
+ uint16_t pci_id;
+ /*
+ * This value is current PCI ID of this function. If ARI is enabled,
+ * then it is Bus Number (8b):Function Number(8b). Otherwise, it is Bus
+ * Number (8b):Device Number (4b):Function Number(4b).
+ */
+ uint16_t alloc_rsscos_ctx;
+ /* The number of RSS/COS contexts currently allocated to the function. */
+ uint16_t alloc_cmpl_rings;
+ /*
+ * The number of completion rings currently allocated to the function.
+ * This does not include the rings allocated to any children functions
+ * if any.
+ */
+ uint16_t alloc_tx_rings;
+ /*
+ * The number of transmit rings currently allocated to the function.
+ * This does not include the rings allocated to any children functions
+ * if any.
+ */
+ uint16_t alloc_rx_rings;
+ /*
+ * The number of receive rings currently allocated to the function. This
+ * does not include the rings allocated to any children functions if
+ * any.
+ */
+ uint16_t alloc_l2_ctx;
+ /* The allocated number of L2 contexts to the function. */
+ uint16_t alloc_vnics;
+ /* The allocated number of vnics to the function. */
+ uint16_t mtu;
+ /*
+ * The maximum transmission unit of the function. For rings allocated on
+ * this function, this default value is used if ring MTU is not
+ * specified.
+ */
+ uint16_t mru;
+ /*
+ * The maximum receive unit of the function. For vnics allocated on this
+ * function, this default value is used if vnic MRU is not specified.
+ */
+ uint16_t stat_ctx_id;
+ /* The statistics context assigned to a function. */
+ uint8_t port_partition_type;
+ /*
+ * The HWRM shall return Unknown value for this field when this command
+ * is used to query VF's configuration.
+ */
+ /* Single physical function */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0)
+ /* Multiple physical functions */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1)
+ /* Network Partitioning 1.0 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2)
+ /* Network Partitioning 1.5 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3)
+ /* Network Partitioning 2.0 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4)
+ /* Unknown */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN UINT32_C(0xff)
+ uint8_t unused_0;
+ uint16_t dflt_vnic_id;
+ /* The default VNIC ID assigned to a function that is being queried. */
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint32_t min_bw;
+ /*
+ * Minimum BW allocated for this function in Mbps. The HWRM will
+ * translate this value into byte counter and time interval used for the
+ * scheduler inside the device. A value of 0 indicates the minimum
+ * bandwidth is not configured.
+ */
+ uint32_t max_bw;
+ /*
+ * Maximum BW allocated for this function in Mbps. The HWRM will
+ * translate this value into byte counter and time interval used for the
+ * scheduler inside the device. A value of 0 indicates that the maximum
+ * bandwidth is not configured.
+ */
+ uint8_t evb_mode;
+ /*
+ * This value indicates the Edge virtual bridge mode for the domain that
+ * this function belongs to.
+ */
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2)
+ uint8_t unused_3;
+ uint16_t unused_4;
+ uint32_t alloc_mcast_filters;
+ /*
+ * The number of allocated multicast filters for this function on the RX
+ * side.
+ */
+ uint32_t alloc_hw_ring_grps;
+ /* The number of allocated HW ring groups for this function. */
+ uint8_t unused_5;
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_cfg */
+/*
+ * Description: This command allows configuration of a PF by the corresponding
+ * PF driver. This command also allows configuration of a child VF by its parent
+ * PF driver. The input FID value is used to indicate what function is being
+ * configured. This allows a PF driver to configure the PF owned by itself or a
+ * virtual function that is a child of the PF. This command allows to reserve
+ * resources for a VF by its parent PF. To reverse the process, the command
+ * should be called with all enables flags cleared for resources. This will free
+ * allocated resources for the VF and return them to the resource pool. If this
+ * command is requested by a VF driver to configure or reserve resources, then
+ * the HWRM shall fail this command. If default MAC address and/or VLAN are
+ * provided in this command, then the HWRM shall set up appropriate MAC/VLAN
+ * filters for the function that is being configured. If source properties
+ * checks are enabled and default MAC address and/or IP address are provided in
+ * this command, then the HWRM shall set appropriate source property checks
+ * based on provided MAC and/or IP addresses. The parent PF driver should not
+ * set MTU/MRU for a VF using this command. This is to allow MTU/MRU setting by
+ * the VF driver. If the MTU or MRU for a VF is set by the PF driver, then the
+ * HWRM should ignore it. A function's MTU/MRU should be set prior to allocating
+ * RX VNICs or TX rings.
+ */
+/* Input (88 bytes) */
+
+struct hwrm_func_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being configured. If set to
+ * 0xFF... (All Fs), then the the configuration is for the requesting
+ * function.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function is requested to be put in the
+ * promiscuous mode.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_PROM_MODE UINT32_C(0x1)
+ /*
+ * When this bit is '1', the function is enabled with source MAC address
+ * check. This is an anti-spoofing check. If this flag is set, then the
+ * function shall be configured to allow transmission of frames with the
+ * source MAC address that is configured for this function.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK UINT32_C(0x2)
+ /*
+ * When this bit is '1', the function is enabled with source IP address
+ * check. This is an anti-spoofing check. If this flag is set, then the
+ * function shall be configured to allow transmission of frames with the
+ * source IP address that is configured for this function.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_IP_ADDR_CHECK UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the function shall be configured with
+ * VLAN priority match. If the VLAN PRI of a packet originated from this
+ * function does not match, then the packet shall be discarded.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_VLAN_PRI_MATCH UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', the function shall be configured to
+ * check for VLAN priority match. If the VLAN PRI of a packet originated
+ * from this function does not match, then the default VLAN PRI shall be
+ * used.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_DFLT_PRI_NOMATCH UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', the function shall be configured to not
+ * allow the transmission of pause frames. PAUSE frames use 48-bit
+ * destination multicast MAC address 01-80-C2-00-00-01.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_DISABLE_PAUSE UINT32_C(0x20)
+ /*
+ * When this bit is set to '1', the function shall be configured to not
+ * allow the transmission of Spanning Tree Protocol (STP) frames. STP
+ * frames use Ethertype 0x0802 and 48-bit destination multicast MAC
+ * address 01-80-C2-00-00-00 and 01-80-C2-00-00-08 for 802.1D and
+ * 802.1ad respectively.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_DISABLE_STP UINT32_C(0x40)
+ /*
+ * When this bit is set to '1', the function shall be configured to not
+ * allow the transmission of Link Layer Discovery Protocol (LLDP)
+ * frames. LLDP frames use Ethertype 0x88CC and 48-bit destination
+ * multicast MAC address 01-80-C2-00-00-00 or 01-80-C2-00-00-03 or
+ * 01-80-C2-00-00-0E.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_DISABLE_LLDP UINT32_C(0x80)
+ /*
+ * When this bit is set to '1', the function shall be configured to not
+ * allow the transmission of Precision Time Protocol (PTP) v2 frames.
+ * PTP frames use Ethertype 0x88F7 and 48-bit destination multicast MAC
+ * address 01-80-C2-00-00-0E or 01-1B-19-00-00-00.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_DISABLE_PTPV2 UINT32_C(0x100)
+ uint32_t enables;
+ /* This bit must be '1' for the mtu field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
+ /* This bit must be '1' for the mru field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU UINT32_C(0x2)
+ /* This bit must be '1' for the num_rsscos_ctxs field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS UINT32_C(0x4)
+ /* This bit must be '1' for the num_cmpl_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS UINT32_C(0x8)
+ /* This bit must be '1' for the num_tx_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS UINT32_C(0x10)
+ /* This bit must be '1' for the num_rx_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS UINT32_C(0x20)
+ /* This bit must be '1' for the num_l2_ctxs field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS UINT32_C(0x40)
+ /* This bit must be '1' for the num_vnics field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS UINT32_C(0x80)
+ /* This bit must be '1' for the num_stat_ctxs field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS UINT32_C(0x100)
+ /* This bit must be '1' for the dflt_mac_addr field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x200)
+ /* This bit must be '1' for the dflt_vlan field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN UINT32_C(0x400)
+ /* This bit must be '1' for the dflt_ip_addr field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR UINT32_C(0x800)
+ /* This bit must be '1' for the min_bw field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW UINT32_C(0x1000)
+ /* This bit must be '1' for the max_bw field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW UINT32_C(0x2000)
+ /* This bit must be '1' for the async_event_cr field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the vlan_antispoof_mode field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the allowed_vlan_pris field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS UINT32_C(0x10000)
+ /* This bit must be '1' for the evb_mode field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the num_mcast_filters field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS UINT32_C(0x40000)
+ /* This bit must be '1' for the num_hw_ring_grps field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS UINT32_C(0x80000)
+ uint16_t mtu;
+ /*
+ * The maximum transmission unit of the function. The HWRM should make
+ * sure that the mtu of the function does not exceed the mtu of the
+ * physical port that this function is associated with. In addition to
+ * configuring mtu per function, it is possible to configure mtu per
+ * transmit ring. By default, the mtu of each transmit ring associated
+ * with a function is equal to the mtu of the function. The HWRM should
+ * make sure that the mtu of each transmit ring that is assigned to a
+ * function has a valid mtu.
+ */
+ uint16_t mru;
+ /*
+ * The maximum receive unit of the function. The HWRM should make sure
+ * that the mru of the function does not exceed the mru of the physical
+ * port that this function is associated with. In addition to
+ * configuring mru per function, it is possible to configure mru per
+ * vnic. By default, the mru of each vnic associated with a function is
+ * equal to the mru of the function. The HWRM should make sure that the
+ * mru of each vnic that is assigned to a function has a valid mru.
+ */
+ uint16_t num_rsscos_ctxs;
+ /* The number of RSS/COS contexts requested for the function. */
+ uint16_t num_cmpl_rings;
+ /*
+ * The number of completion rings requested for the function. This does
+ * not include the rings allocated to any children functions if any.
+ */
+ uint16_t num_tx_rings;
+ /*
+ * The number of transmit rings requested for the function. This does
+ * not include the rings allocated to any children functions if any.
+ */
+ uint16_t num_rx_rings;
+ /*
+ * The number of receive rings requested for the function. This does not
+ * include the rings allocated to any children functions if any.
+ */
+ uint16_t num_l2_ctxs;
+ /* The requested number of L2 contexts for the function. */
+ uint16_t num_vnics;
+ /* The requested number of vnics for the function. */
+ uint16_t num_stat_ctxs;
+ /* The requested number of statistic contexts for the function. */
+ uint16_t num_hw_ring_grps;
+ /*
+ * The number of HW ring groups that should be reserved for this
+ * function.
+ */
+ uint8_t dflt_mac_addr[6];
+ /* The default MAC address for the function being configured. */
+ uint16_t dflt_vlan;
+ /*
+ * The default VLAN for the function being configured. This field's
+ * format is same as 802.1Q Tag's Tag Control Information (TCI) format
+ * that includes both Priority Code Point (PCP) and VLAN Identifier
+ * (VID).
+ */
+ uint32_t dflt_ip_addr[4]; /* big endian */
+ /*
+ * The default IP address for the function being configured. This
+ * address is only used in enabling source property check.
+ */
+ uint32_t min_bw;
+ /*
+ * Minimum BW allocated for this function in Mbps. The HWRM will
+ * translate this value into byte counter and time interval used for the
+ * scheduler inside the device.
+ */
+ uint32_t max_bw;
+ /*
+ * Maximum BW allocated for this function in Mbps. The HWRM will
+ * translate this value into byte counter and time interval used for the
+ * scheduler inside the device.
+ */
+ uint16_t async_event_cr;
+ /*
+ * ID of the target completion ring for receiving asynchronous event
+ * completions. If this field is not valid, then the HWRM shall use the
+ * default completion ring of the function that is being configured as
+ * the target completion ring for providing any asynchronous event
+ * completions for that function. If this field is valid, then the HWRM
+ * shall use the completion ring identified by this ID as the target
+ * completion ring for providing any asynchronous event completions for
+ * the function that is being configured.
+ */
+ uint8_t vlan_antispoof_mode;
+ /* VLAN Anti-spoofing mode. */
+ /* No VLAN anti-spoofing checks are enabled */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK UINT32_C(0x0)
+ /* Validate VLAN against the configured VLAN(s) */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN UINT32_C(0x1)
+ /* Insert VLAN if it does not exist, otherwise discard */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE UINT32_C(0x2)
+ /* Insert VLAN if it does not exist, override VLAN if it exists */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN UINT32_C(0x3)
+ uint8_t allowed_vlan_pris;
+ /*
+ * This bit field defines VLAN PRIs that are allowed on this function.
+ * If nth bit is set, then VLAN PRI n is allowed on this function.
+ */
+ uint8_t evb_mode;
+ /*
+ * The HWRM shall allow a PF driver to change EVB mode for the partition
+ * it belongs to. The HWRM shall not allow a VF driver to change the EVB
+ * mode. The HWRM shall take into account the switching of EVB mode from
+ * one to another and reconfigure hardware resources as appropriately.
+ * The switching from VEB to VEPA mode requires the disabling of the
+ * loopback traffic. Additionally, source knock outs are handled
+ * differently in VEB and VEPA modes.
+ */
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2)
+ uint8_t unused_2;
+ uint16_t num_mcast_filters;
+ /*
+ * The number of multicast filters that should be reserved for this
+ * function on the RX side.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_qstats */
+/*
+ * Description: This command returns statistics of a function. The input FID
+ * value is used to indicate what function is being queried. This allows a
+ * physical function driver to query virtual functions that are children of the
+ * physical function. The HWRM shall return any unsupported counter with a value
+ * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_qstats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being queried. 0xFF... (All Fs)
+ * if the query is for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (176 bytes) */
+
+struct hwrm_func_qstats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted unicast packets on the function. */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted multicast packets on the function. */
+ uint64_t tx_bcast_pkts;
+ /* Number of transmitted broadcast packets on the function. */
+ uint64_t tx_err_pkts;
+ /*
+ * Number of transmitted packets that were dropped due to internal NIC
+ * resource problems. For transmit, this can only happen if TMP is
+ * configured to allow dropping in HOL blocking conditions, which is not
+ * a normal configuration.
+ */
+ uint64_t tx_drop_pkts;
+ /*
+ * Number of dropped packets on transmit path on the function. These are
+ * packets that have been marked for drop by the TE CFA block or are
+ * packets that exceeded the transmit MTU limit for the function.
+ */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic on the function. */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for multicast traffic on the function. */
+ uint64_t tx_bcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic on the function. */
+ uint64_t rx_ucast_pkts;
+ /* Number of received unicast packets on the function. */
+ uint64_t rx_mcast_pkts;
+ /* Number of received multicast packets on the function. */
+ uint64_t rx_bcast_pkts;
+ /* Number of received broadcast packets on the function. */
+ uint64_t rx_err_pkts;
+ /*
+ * Number of received packets that were dropped on the function due to
+ * resource limitations. This can happen for 3 reasons. # The BD used
+ * for the packet has a bad format. # There were no BDs available in the
+ * ring for the packet. # There were no BDs available on-chip for the
+ * packet.
+ */
+ uint64_t rx_drop_pkts;
+ /*
+ * Number of dropped packets on received path on the function. These are
+ * packets that have been marked for drop by the RE CFA.
+ */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for unicast traffic on the function. */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for multicast traffic on the function. */
+ uint64_t rx_bcast_bytes;
+ /* Number of received bytes for broadcast traffic on the function. */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast packets on the function. */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregated unicast bytes on the function. */
+ uint64_t rx_agg_events;
+ /* Number of aggregation events on the function. */
+ uint64_t rx_agg_aborts;
+ /* Number of aborted aggregations on the function. */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_clr_stats */
+/*
+ * Description: This command clears statistics of a function. The input FID
+ * value is used to indicate what function's statistics is being cleared. This
+ * allows a physical function driver to clear statistics of virtual functions
+ * that are children of the physical function.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function. 0xFF... (All Fs) if the query is for the
+ * requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_vf_resc_free */
+/* Description: This command frees resources of a vf. */
+/* Input (24 bytes) */
+
+struct hwrm_func_vf_resc_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_vf_resc_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_vf_vnic_ids_query */
+/* Description: This command is used to query vf vnic ids. */
+/* Input (32 bytes) */
+
+struct hwrm_func_vf_vnic_ids_query_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t max_vnic_id_cnt;
+ /* Max number of vnic ids in vnic id table */
+ uint64_t vnic_id_tbl_addr;
+ /* This is the address for VF VNIC ID table */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_vf_vnic_ids_query_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t vnic_id_cnt;
+ /* Actual number of vnic ids Each VNIC ID is written as a 32-bit number. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_drv_rgtr */
+/*
+ * Description: This command is used by the function driver to register its
+ * information with the HWRM. A function driver shall implement this command. A
+ * function driver shall use this command during the driver initialization right
+ * after the HWRM version discovery and default ring resources allocation.
+ */
+/* Input (80 bytes) */
+
+struct hwrm_func_drv_rgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function driver is requesting all requests
+ * from its children VF drivers to be forwarded to itself. This flag can
+ * only be set by the PF driver. If a VF driver sets this flag, it
+ * should be ignored by the HWRM.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1)
+ /*
+ * When this bit is '1', the function is requesting none of the requests
+ * from its children VF drivers to be forwarded to itself. This flag can
+ * only be set by the PF driver. If a VF driver sets this flag, it
+ * should be ignored by the HWRM.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2)
+ uint32_t enables;
+ /* This bit must be '1' for the os_type field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE UINT32_C(0x1)
+ /* This bit must be '1' for the ver field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER UINT32_C(0x2)
+ /* This bit must be '1' for the timestamp field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP UINT32_C(0x4)
+ /* This bit must be '1' for the vf_req_fwd field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD UINT32_C(0x8)
+ /* This bit must be '1' for the async_event_fwd field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD UINT32_C(0x10)
+ uint16_t os_type;
+ /* This value indicates the type of OS. */
+ /* Unknown */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Other OS not listed below. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1)
+ /* MSDOS OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe)
+ /* Windows OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12)
+ /* Solaris OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d)
+ /* Linux OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24)
+ /* FreeBSD OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a)
+ /* VMware ESXi OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68)
+ /* Microsoft Windows 8 64-bit OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73)
+ /* Microsoft Windows Server 2012 R2 OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74)
+ uint8_t ver_maj;
+ /* This is the major version of the driver. */
+ uint8_t ver_min;
+ /* This is the minor version of the driver. */
+ uint8_t ver_upd;
+ /* This is the update version of the driver. */
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint32_t timestamp;
+ /*
+ * This is a 32-bit timestamp provided by the driver for keep alive. The
+ * timestamp is in multiples of 1ms.
+ */
+ uint32_t unused_2;
+ uint32_t vf_req_fwd[8];
+ /*
+ * This is a 256-bit bit mask provided by the PF driver for letting the
+ * HWRM know what commands issued by the VF driver to the HWRM should be
+ * forwarded to the PF driver. Nth bit refers to the Nth req_type.
+ * Setting Nth bit to 1 indicates that requests from the VF driver with
+ * req_type equal to N shall be forwarded to the parent PF driver. This
+ * field is not valid for the VF driver.
+ */
+ uint32_t async_event_fwd[8];
+ /*
+ * This is a 256-bit bit mask provided by the function driver (PF or VF
+ * driver) to indicate the list of asynchronous event completions to be
+ * forwarded. Nth bit refers to the Nth event_id. Setting Nth bit to 1
+ * by the function driver shall result in the HWRM forwarding
+ * asynchronous event completion with event_id equal to N. If all bits
+ * are set to 0 (value of 0), then the HWRM shall not forward any
+ * asynchronous event completion to this function driver.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_drv_rgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_drv_unrgtr */
+/*
+ * Description: This command is used by the function driver to un register with
+ * the HWRM. A function driver shall implement this command. A function driver
+ * shall use this command during the driver unloading.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_drv_unrgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function driver is notifying the HWRM to
+ * prepare for the shutdown.
+ */
+ #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN UINT32_C(0x1)
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_drv_unrgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_buf_rgtr */
+/*
+ * Description: This command is used by the PF driver to register buffers used
+ * in the PF-VF communication with the HWRM. The PF driver uses this command to
+ * register buffers for each PF-VF channel. A parent PF may issue this command
+ * per child VF. If VF ID is not valid, then this command is used to register
+ * buffers for all children VFs of the PF.
+ */
+/* Input (128 bytes) */
+
+struct hwrm_func_buf_rgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id field to be configured. */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
+ /* This bit must be '1' for the err_buf_addr field to be configured. */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2)
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint16_t req_buf_num_pages;
+ /* This field represents the number of pages used for request buffer(s). */
+ uint16_t req_buf_page_size;
+ /* This field represents the page size used for request buffer(s). */
+ /* 16 bytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_16B UINT32_C(0x4)
+ /* 4 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4K UINT32_C(0xc)
+ /* 8 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_8K UINT32_C(0xd)
+ /* 64 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_64K UINT32_C(0x10)
+ /* 2 Mbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_2M UINT32_C(0x15)
+ /* 4 Mbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4M UINT32_C(0x16)
+ /* 1 Gbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G UINT32_C(0x1e)
+ uint16_t req_buf_len;
+ /* The length of the request buffer per VF in bytes. */
+ uint16_t resp_buf_len;
+ /* The length of the response buffer in bytes. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint64_t req_buf_page_addr0;
+ /* This field represents the page address of page #0. */
+ uint64_t req_buf_page_addr1;
+ /* This field represents the page address of page #1. */
+ uint64_t req_buf_page_addr2;
+ /* This field represents the page address of page #2. */
+ uint64_t req_buf_page_addr3;
+ /* This field represents the page address of page #3. */
+ uint64_t req_buf_page_addr4;
+ /* This field represents the page address of page #4. */
+ uint64_t req_buf_page_addr5;
+ /* This field represents the page address of page #5. */
+ uint64_t req_buf_page_addr6;
+ /* This field represents the page address of page #6. */
+ uint64_t req_buf_page_addr7;
+ /* This field represents the page address of page #7. */
+ uint64_t req_buf_page_addr8;
+ /* This field represents the page address of page #8. */
+ uint64_t req_buf_page_addr9;
+ /* This field represents the page address of page #9. */
+ uint64_t error_buf_addr;
+ /*
+ * This field is used to receive the error reporting from the chipset.
+ * Only applicable for PFs.
+ */
+ uint64_t resp_buf_addr;
+ /* This field is used to receive the response forwarded by the HWRM. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_buf_rgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_buf_unrgtr */
+/*
+ * Description: This command is used by the PF driver to unregister buffers used
+ * in the PF-VF communication with the HWRM. The PF driver uses this command to
+ * unregister buffers for PF-VF communication. A parent PF may issue this
+ * command to unregister buffers for communication between the PF and a specific
+ * VF. If the VF ID is not valid, then this command is used to unregister
+ * buffers used for communications with all children VFs of the PF.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_buf_unrgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id field to be configured. */
+ #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_buf_unrgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_drv_qver */
+/*
+ * Description: This command is used to query the version of the driver. Any
+ * driver version with major = 0, minor = 0, and update = 0 shall be considered
+ * an invalid or unknown version.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_drv_qver_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t reserved;
+ /* Reserved for future use */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being queried. 0xFF... (All Fs)
+ * if the query is for the requesting function.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_drv_qver_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t os_type;
+ /* This value indicates the type of OS. */
+ /* Unknown */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Other OS not listed below. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_OTHER UINT32_C(0x1)
+ /* MSDOS OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_MSDOS UINT32_C(0xe)
+ /* Windows OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WINDOWS UINT32_C(0x12)
+ /* Solaris OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_SOLARIS UINT32_C(0x1d)
+ /* Linux OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LINUX UINT32_C(0x24)
+ /* FreeBSD OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_FREEBSD UINT32_C(0x2a)
+ /* VMware ESXi OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_ESXI UINT32_C(0x68)
+ /* Microsoft Windows 8 64-bit OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN864 UINT32_C(0x73)
+ /* Microsoft Windows Server 2012 R2 OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74)
+ uint8_t ver_maj;
+ /* This is the major version of the driver. */
+ uint8_t ver_min;
+ /* This is the minor version of the driver. */
+ uint8_t ver_upd;
+ /* This is the update version of the driver. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_phy_cfg */
+/*
+ * Description: This command configures the PHY device for the port. It allows
+ * setting of the most generic settings for the PHY. The HWRM shall complete
+ * this command as soon as PHY settings are configured. They may not be applied
+ * when the command response is provided. A VF driver shall not be allowed to
+ * configure PHY using this command. In a network partition mode, a PF driver
+ * shall not be allowed to configure PHY using this command.
+ */
+/* Input (56 bytes) */
+
+struct hwrm_port_phy_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is set to '1', the PHY for the port shall be reset. #
+ * If this bit is set to 1, then the HWRM shall reset the PHY after
+ * applying PHY configuration changes specified in this command. # In
+ * order to guarantee that PHY configuration changes specified in this
+ * command take effect, the HWRM client should set this flag to 1. # If
+ * this bit is not set to 1, then the HWRM may reset the PHY depending
+ * on the current PHY configuration and settings specified in this
+ * command.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', the link shall be forced to be taken
+ * down. # When this bit is set to '1", all other command input settings
+ * related to the link speed shall be ignored. Once the link state is
+ * forced down, it can be explicitly cleared from that state by setting
+ * this flag to '0'. # If this flag is set to '0', then the link shall
+ * be cleared from forced down state if the link is in forced down
+ * state. There may be conditions (e.g. out-of-band or sideband
+ * configuration changes for the link) outside the scope of the HWRM
+ * implementation that may clear forced down link state.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DOWN UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', the link shall be forced to the
+ * force_link_speed value. When this bit is set to '1', the HWRM client
+ * should not enable any of the auto negotiation related fields
+ * represented by auto_XXX fields in this command. When this bit is set
+ * to '1' and the HWRM client has enabled a auto_XXX field in this
+ * command, then the HWRM shall ignore the enabled auto_XXX field. When
+ * this bit is set to zero, the link shall be allowed to autoneg.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the auto-negotiation process shall be
+ * restarted on the link.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', Energy Efficient Ethernet (EEE) is
+ * requested to be enabled on this link. If EEE is not supported on this
+ * port, then this flag shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', Energy Efficient Ethernet (EEE) is
+ * requested to be disabled on this link. If EEE is not supported on
+ * this port, then this flag shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE UINT32_C(0x20)
+ /*
+ * When this bit is set to '1' and EEE is enabled on this link, then TX
+ * LPI is requested to be enabled on the link. If EEE is not supported
+ * on this port, then this flag shall be ignored by the HWRM. If EEE is
+ * disabled on this port, then this flag shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE UINT32_C(0x40)
+ /*
+ * When this bit is set to '1' and EEE is enabled on this link, then TX
+ * LPI is requested to be disabled on the link. If EEE is not supported
+ * on this port, then this flag shall be ignored by the HWRM. If EEE is
+ * disabled on this port, then this flag shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE UINT32_C(0x80)
+ /*
+ * When set to 1, then the HWRM shall enable FEC autonegotitation on
+ * this port if supported. When set to 0, then this flag shall be
+ * ignored. If FEC autonegotiation is not supported, then the HWRM shall
+ * ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE UINT32_C(0x100)
+ /*
+ * When set to 1, then the HWRM shall disable FEC autonegotiation on
+ * this port if supported. When set to 0, then this flag shall be
+ * ignored. If FEC autonegotiation is not supported, then the HWRM shall
+ * ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE UINT32_C(0x200)
+ /*
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire Code)
+ * on this port if supported. When set to 0, then this flag shall be
+ * ignored. If FEC CLAUSE 74 is not supported, then the HWRM shall
+ * ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE UINT32_C(0x400)
+ /*
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 74 (Fire Code)
+ * on this port if supported. When set to 0, then this flag shall be
+ * ignored. If FEC CLAUSE 74 is not supported, then the HWRM shall
+ * ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE UINT32_C(0x800)
+ /*
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed
+ * Solomon) on this port if supported. When set to 0, then this flag
+ * shall be ignored. If FEC CLAUSE 91 is not supported, then the HWRM
+ * shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE UINT32_C(0x1000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed
+ * Solomon) on this port if supported. When set to 0, then this flag
+ * shall be ignored. If FEC CLAUSE 91 is not supported, then the HWRM
+ * shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE UINT32_C(0x2000)
+ uint32_t enables;
+ /* This bit must be '1' for the auto_mode field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE UINT32_C(0x1)
+ /* This bit must be '1' for the auto_duplex field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX UINT32_C(0x2)
+ /* This bit must be '1' for the auto_pause field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE UINT32_C(0x4)
+ /* This bit must be '1' for the auto_link_speed field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the auto_link_speed_mask field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK UINT32_C(0x10)
+ /* This bit must be '1' for the wirespeed field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIRESPEED UINT32_C(0x20)
+ /* This bit must be '1' for the lpbk field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK UINT32_C(0x40)
+ /* This bit must be '1' for the preemphasis field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS UINT32_C(0x80)
+ /* This bit must be '1' for the force_pause field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the eee_link_speed_mask field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK UINT32_C(0x200)
+ /* This bit must be '1' for the tx_lpi_timer field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER UINT32_C(0x400)
+ uint16_t port_id;
+ /* Port ID of port that is to be configured. */
+ uint16_t force_link_speed;
+ /*
+ * This is the speed that will be used if the force bit is '1'. If
+ * unsupported speed is selected, an error will be generated.
+ */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint8_t auto_mode;
+ /*
+ * This value is used to identify what autoneg mode is used when the
+ * link speed is not being forced.
+ */
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This
+ * mode has been DEPRECATED. An HWRM client should not use this
+ * mode.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below that speed for
+ * autoneg. This mode has been DEPRECATED. An HWRM client should
+ * not use this mode.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding link speed mask
+ * value that is provided.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
+ uint8_t auto_duplex;
+ /*
+ * This is the duplex setting that will be used if the autoneg_mode is
+ * "one_speed" or "one_or_below".
+ */
+ /* Half Duplex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0)
+ /* Full duplex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1)
+ /* Both Half and Full dupex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2)
+ uint8_t auto_pause;
+ /*
+ * This value is used to configure the pause that will be used for
+ * autonegotiation. Add text on the usage of auto_pause and force_pause.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages has been
+ * requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages has been
+ * requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX UINT32_C(0x2)
+ /*
+ * When set to 1, the advertisement of pause is enabled. # When the
+ * auto_mode is not set to none and this flag is set to 1, then the
+ * auto_pause bits on this port are being advertised and autoneg pause
+ * results are being interpreted. # When the auto_mode is not set to
+ * none and this flag is set to 0, the pause is forced as indicated in
+ * force_pause, and also advertised as auto_pause bits, but the autoneg
+ * results are not interpreted since the pause configuration is being
+ * forced. # When the auto_mode is set to none and this flag is set to
+ * 1, auto_pause bits should be ignored and should be set to 0.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
+ uint8_t unused_0;
+ uint16_t auto_link_speed;
+ /*
+ * This is the speed that will be used if the autoneg_mode is
+ * "one_speed" or "one_or_below". If an unsupported speed is selected,
+ * an error will be generated.
+ */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint16_t auto_link_speed_mask;
+ /*
+ * This is a mask of link speeds that will be used if autoneg_mode is
+ * "mask". If unsupported speed is enabled an error will be generated.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB UINT32_C(0x2000)
+ uint8_t wirespeed;
+ /* This value controls the wirespeed feature. */
+ /* Wirespeed feature is disabled. */
+ #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_OFF UINT32_C(0x0)
+ /* Wirespeed feature is enabled. */
+ #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON UINT32_C(0x1)
+ uint8_t lpbk;
+ /* This value controls the loopback setting for the PHY. */
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that host
+ * data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that port
+ * logic will send packets back out the transmitter that are
+ * received.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
+ uint8_t force_pause;
+ /*
+ * This value is used to configure the pause that will be used for force
+ * mode.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages is supported.
+ * Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages is supported.
+ * Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2)
+ uint8_t unused_1;
+ uint32_t preemphasis;
+ /*
+ * This value controls the pre-emphasis to be used for the link. Driver
+ * should not set this value (use enable.preemphasis = 0) unless driver
+ * is sure of setting. Normally HWRM FW will determine proper pre-
+ * emphasis.
+ */
+ uint16_t eee_link_speed_mask;
+ /*
+ * Setting for link speed mask that is used to advertise speeds during
+ * autonegotiation when EEE is enabled. This field is valid only when
+ * EEE is enabled. The speeds specified in this field shall be a subset
+ * of speeds specified in auto_link_speed_mask. If EEE is enabled,then
+ * at least one speed shall be provided in this mask.
+ */
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint32_t tx_lpi_timer;
+ uint32_t unused_4;
+ /*
+ * Reuested setting of TX LPI timer in microseconds. This field is valid
+ * only when EEE is enabled and TX LPI is enabled.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_port_phy_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_phy_qcfg */
+/* Description: This command queries the PHY configuration for the port. */
+/* Input (24 bytes) */
+
+struct hwrm_port_phy_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is to be queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (96 bytes) */
+
+struct hwrm_port_phy_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t link;
+ /* This value indicates the current link status. */
+ /* There is no link or cable detected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0)
+ /* There is no link, but a cable has been detected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1)
+ /* There is a link. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2)
+ uint8_t unused_0;
+ uint16_t link_speed;
+ /* This value indicates the current link speed of the connection. */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint8_t duplex;
+ /* This value is indicates the duplex of the current connection. */
+ /* Half Duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_HALF UINT32_C(0x0)
+ /* Full duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_FULL UINT32_C(0x1)
+ uint8_t pause;
+ /*
+ * This value is used to indicate the current pause configuration. When
+ * autoneg is enabled, this value represents the autoneg results of
+ * pause configuration.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages is supported.
+ * Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages is supported.
+ * Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2)
+ uint16_t support_speeds;
+ /*
+ * The supported speeds for the port. This is a bit mask. For each speed
+ * that is supported, the corrresponding bit will be set to '1'.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000)
+ uint16_t force_link_speed;
+ /*
+ * Current setting of forced link speed. When the link speed is not
+ * being forced, this value shall be set to 0.
+ */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint8_t auto_mode;
+ /* Current setting of auto negotiation mode. */
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This
+ * mode has been DEPRECATED. An HWRM client should not use this
+ * mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below that speed for
+ * autoneg. This mode has been DEPRECATED. An HWRM client should
+ * not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding link speed mask
+ * value that is provided.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
+ uint8_t auto_pause;
+ /*
+ * Current setting of pause autonegotiation. Move autoneg_pause flag
+ * here.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages has been
+ * requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages has been
+ * requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX UINT32_C(0x2)
+ /*
+ * When set to 1, the advertisement of pause is enabled. # When the
+ * auto_mode is not set to none and this flag is set to 1, then the
+ * auto_pause bits on this port are being advertised and autoneg pause
+ * results are being interpreted. # When the auto_mode is not set to
+ * none and this flag is set to 0, the pause is forced as indicated in
+ * force_pause, and also advertised as auto_pause bits, but the autoneg
+ * results are not interpreted since the pause configuration is being
+ * forced. # When the auto_mode is set to none and this flag is set to
+ * 1, auto_pause bits should be ignored and should be set to 0.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
+ uint16_t auto_link_speed;
+ /*
+ * Current setting for auto_link_speed. This field is only valid when
+ * auto_mode is set to "one_speed" or "one_or_below".
+ */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint16_t auto_link_speed_mask;
+ /*
+ * Current setting for auto_link_speed_mask that is used to advertise
+ * speeds during autonegotiation. This field is only valid when
+ * auto_mode is set to "mask". The speeds specified in this field shall
+ * be a subset of supported speeds on this port.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB UINT32_C(0x2000)
+ uint8_t wirespeed;
+ /* Current setting for wirespeed. */
+ /* Wirespeed feature is disabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_OFF UINT32_C(0x0)
+ /* Wirespeed feature is enabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON UINT32_C(0x1)
+ uint8_t lpbk;
+ /* Current setting for loopback. */
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that host
+ * data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that port
+ * logic will send packets back out the transmitter that are
+ * received.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ uint8_t force_pause;
+ /*
+ * Current setting of forced pause. When the pause configuration is not
+ * being forced, then this value shall be set to 0.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages is supported.
+ * Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages is supported.
+ * Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2)
+ uint8_t module_status;
+ /*
+ * This value indicates the current status of the optics module on this
+ * port.
+ */
+ /* Module is inserted and accepted */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE UINT32_C(0x0)
+ /* Module is rejected and transmit side Laser is disabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX UINT32_C(0x1)
+ /* Module mismatch warning. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG UINT32_C(0x2)
+ /* Module is rejected and powered down. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN UINT32_C(0x3)
+ /* Module is not inserted. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED UINT32_C(0x4)
+ /* Module status is not applicable. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE UINT32_C(0xff)
+ uint32_t preemphasis;
+ /* Current setting for preemphasis. */
+ uint8_t phy_maj;
+ /* This field represents the major version of the PHY. */
+ uint8_t phy_min;
+ /* This field represents the minor version of the PHY. */
+ uint8_t phy_bld;
+ /* This field represents the build version of the PHY. */
+ uint8_t phy_type;
+ /* This value represents a PHY type. */
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN UINT32_C(0x0)
+ /* BASE-CR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR UINT32_C(0x1)
+ /* BASE-KR4 (Deprecated) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 UINT32_C(0x2)
+ /* BASE-LR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR UINT32_C(0x3)
+ /* BASE-SR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR UINT32_C(0x4)
+ /* BASE-KR2 (Deprecated) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 UINT32_C(0x5)
+ /* BASE-KX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX UINT32_C(0x6)
+ /* BASE-KR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR UINT32_C(0x7)
+ /* BASE-T */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET UINT32_C(0x8)
+ /* EEE capable BASE-T */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE UINT32_C(0x9)
+ /* SGMII connected external PHY */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY UINT32_C(0xa)
+ uint8_t media_type;
+ /* This value represents a media type. */
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Twisted Pair */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1)
+ /* Direct Attached Copper */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2)
+ /* Fiber */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3)
+ uint8_t xcvr_pkg_type;
+ /* This value represents a transceiver type. */
+ /* PHY and MAC are in the same package */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL UINT32_C(0x1)
+ /* PHY and MAC are in different packages */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL UINT32_C(0x2)
+ uint8_t eee_config_phy_addr;
+ /*
+ * This field represents flags related to EEE configuration. These EEE
+ * configuration flags are valid only when the auto_mode is not set to
+ * none (in other words autonegotiation is enabled).
+ */
+ /* This field represents PHY address. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK UINT32_C(0x1f)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0
+ /*
+ * When set to 1, Energy Efficient Ethernet (EEE) mode is enabled.
+ * Speeds for autoneg with EEE mode enabled are based on
+ * eee_link_speed_mask.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED UINT32_C(0x20)
+ /*
+ * This flag is valid only when eee_enabled is set to 1. # If
+ * eee_enabled is set to 0, then EEE mode is disabled and this flag
+ * shall be ignored. # If eee_enabled is set to 1 and this flag is set
+ * to 1, then Energy Efficient Ethernet (EEE) mode is enabled and in
+ * use. # If eee_enabled is set to 1 and this flag is set to 0, then
+ * Energy Efficient Ethernet (EEE) mode is enabled but is currently not
+ * in use.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE UINT32_C(0x40)
+ /*
+ * This flag is valid only when eee_enabled is set to 1. # If
+ * eee_enabled is set to 0, then EEE mode is disabled and this flag
+ * shall be ignored. # If eee_enabled is set to 1 and this flag is set
+ * to 1, then Energy Efficient Ethernet (EEE) mode is enabled and TX LPI
+ * is enabled. # If eee_enabled is set to 1 and this flag is set to 0,
+ * then Energy Efficient Ethernet (EEE) mode is enabled but TX LPI is
+ * disabled.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI UINT32_C(0x80)
+ /*
+ * This field represents flags related to EEE configuration. These EEE
+ * configuration flags are valid only when the auto_mode is not set to
+ * none (in other words autonegotiation is enabled).
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK UINT32_C(0xe0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5
+ uint8_t parallel_detect;
+ /* Reserved field, set to 0 */
+ /*
+ * When set to 1, the parallel detection is used to determine the speed
+ * of the link partner. Parallel detection is used when a
+ * autonegotiation capable device is connected to a link parter that is
+ * not capable of autonegotiation.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1)
+ /* Reserved field, set to 0 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_MASK UINT32_C(0xfe)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_SFT 1
+ uint16_t link_partner_adv_speeds;
+ /*
+ * The advertised speeds for the port by the link partner. Each
+ * advertised speed will be set to '1'.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB UINT32_C(0x2000)
+ uint8_t link_partner_adv_auto_mode;
+ /*
+ * The advertised autoneg for the port by the link partner. This field
+ * is deprecated and should be set to 0.
+ */
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This
+ * mode has been DEPRECATED. An HWRM client should not use this
+ * mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below that speed for
+ * autoneg. This mode has been DEPRECATED. An HWRM client should
+ * not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding link speed mask
+ * value that is provided.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
+ uint8_t link_partner_adv_pause;
+ /* The advertised pause settings on the port by the link partner. */
+ /*
+ * When this bit is '1', Generation of tx pause messages is supported.
+ * Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages is supported.
+ * Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX UINT32_C(0x2)
+ uint16_t adv_eee_link_speed_mask;
+ /*
+ * Current setting for link speed mask that is used to advertise speeds
+ * during autonegotiation when EEE is enabled. This field is valid only
+ * when eee_enabled flags is set to 1. The speeds specified in this
+ * field shall be a subset of speeds specified in auto_link_speed_mask.
+ */
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ uint16_t link_partner_adv_eee_link_speed_mask;
+ /*
+ * Current setting for link speed mask that is advertised by the link
+ * partner when EEE is enabled. This field is valid only when
+ * eee_enabled flags is set to 1.
+ */
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ uint32_t xcvr_identifier_type_tx_lpi_timer;
+ /* This value represents transceiver identifier type. */
+ /*
+ * Current setting of TX LPI timer in microseconds. This field is valid
+ * only when_eee_enabled flag is set to 1 and tx_lpi_enabled is set to
+ * 1.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
+ /* This value represents transceiver identifier type. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN (UINT32_C(0x0) << 24)
+ /* SFP/SFP+/SFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP (UINT32_C(0x3) << 24)
+ /* QSFP */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP (UINT32_C(0xc) << 24)
+ /* QSFP+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS (UINT32_C(0xd) << 24)
+ /* QSFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 (UINT32_C(0x11) << 24)
+ uint16_t fec_cfg;
+ /*
+ * This value represents the current configuration of Forward Error
+ * Correction (FEC) on the port.
+ */
+ /*
+ * When set to 1, then FEC is not supported on this port. If this flag
+ * is set to 1, then all other FEC configuration flags shall be ignored.
+ * When set to 0, then FEC is supported as indicated by other
+ * configuration flags. If no cable is attached and the HWRM does not
+ * yet know the FEC capability, then the HWRM shall set this flag to 1
+ * when reporting FEC capability.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED UINT32_C(0x1)
+ /*
+ * When set to 1, then FEC autonegotiation is supported on this port.
+ * When set to 0, then FEC autonegotiation is not supported on this
+ * port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED UINT32_C(0x2)
+ /*
+ * When set to 1, then FEC autonegotiation is enabled on this port. When
+ * set to 0, then FEC autonegotiation is disabled if supported. This
+ * flag should be ignored if FEC autonegotiation is not supported on
+ * this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED UINT32_C(0x4)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on this
+ * port. When set to 0, then FEC CLAUSE 74 (Fire Code) is not supported
+ * on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED UINT32_C(0x8)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on this
+ * port. When set to 0, then FEC CLAUSE 74 (Fire Code) is disabled if
+ * supported. This flag should be ignored if FEC CLAUSE 74 is not
+ * supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED UINT32_C(0x10)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this
+ * port. When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not
+ * supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED UINT32_C(0x20)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this
+ * port. When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if
+ * supported. This flag should be ignored if FEC CLAUSE 91 is not
+ * supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED UINT32_C(0x40)
+ uint8_t unused_1;
+ uint8_t unused_2;
+ char phy_vendor_name[16];
+ /*
+ * Up to 16 bytes of null padded ASCII string representing PHY vendor.
+ * If the string is set to null, then the vendor name is not available.
+ */
+ char phy_vendor_partnumber[16];
+ /*
+ * Up to 16 bytes of null padded ASCII string that identifies vendor
+ * specific part number of the PHY. If the string is set to null, then
+ * the vendor specific part number is not available.
+ */
+ uint32_t unused_3;
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t unused_6;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_mac_cfg */
+/* Description: This command configures the MAC block for the port. */
+/* Input (40 bytes) */
+
+struct hwrm_port_mac_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', this command will configure the MAC to match
+ * the current link state of the PHY. If the link is not established on
+ * the PHY, then this bit has no effect.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_MATCH_LINK UINT32_C(0x1)
+ /*
+ * When this bit is '1', the CoS assignment logic is enabled. When this
+ * logic is enabled, then inner VLAN PRI to CoS mapping is enabled. If
+ * this bit is '0', then the default CoS is used.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_COS_ASSIGNMENT_ENABLE UINT32_C(0x2)
+ /*
+ * When this bit is '1', tunnel or outer VLAN PRI field to CoS mapping
+ * is enabled. If this bit is '0', then outer VLAN PRI bits are not used
+ * in determining CoS.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_ENABLE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the IP DSCP to CoS mapping is enabled. If this
+ * bit is '0', then IP DSCP bits are not used in determining CoS.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_ENABLE UINT32_C(0x8)
+ /*
+ * When this bit is '1', the HWRM is requested to enable timestamp
+ * capture capability on the receive side of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE UINT32_C(0x10)
+ /*
+ * When this bit is '1', the HWRM is requested to disable timestamp
+ * capture capability on the receive side of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_DISABLE UINT32_C(0x20)
+ /*
+ * When this bit is '1', the HWRM is requested to enable timestamp
+ * capture capability on the transmit side of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE UINT32_C(0x40)
+ /*
+ * When this bit is '1', the HWRM is requested to disable timestamp
+ * capture capability on the transmit side of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_DISABLE UINT32_C(0x80)
+ /*
+ * When this bit is '1', the Out-Of-Box WoL is requested to be enabled
+ * on this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE UINT32_C(0x100)
+ /*
+ * When this bit is '1', the the Out-Of-Box WoL is requested to be
+ * disabled on this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE UINT32_C(0x200)
+ uint32_t enables;
+ /* This bit must be '1' for the ipg field to be configured. */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_IPG UINT32_C(0x1)
+ /* This bit must be '1' for the lpbk field to be configured. */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_LPBK UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the ivlan_pri2cos_map_pri field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_IVLAN_PRI2COS_MAP_PRI UINT32_C(0x4)
+ /* This bit must be '1' for the lcos_map_pri field to be configured. */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_LCOS_MAP_PRI UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the tunnel_pri2cos_map_pri field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TUNNEL_PRI2COS_MAP_PRI UINT32_C(0x10)
+ /* This bit must be '1' for the dscp2cos_map_pri field to be configured. */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_DSCP2COS_MAP_PRI UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the rx_ts_capture_ptp_msg_type field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_RX_TS_CAPTURE_PTP_MSG_TYPE UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the tx_ts_capture_ptp_msg_type field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TX_TS_CAPTURE_PTP_MSG_TYPE UINT32_C(0x80)
+ uint16_t port_id;
+ /* Port ID of port that is to be configured. */
+ uint8_t ipg;
+ /*
+ * This value is used to configure the minimum IPG that will be sent
+ * between packets by this port.
+ */
+ uint8_t lpbk;
+ /* This value controls the loopback setting for the MAC. */
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that host
+ * data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that port
+ * logic will send packets back out the transmitter that are
+ * received.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
+ uint8_t ivlan_pri2cos_map_pri;
+ /*
+ * This value controls the priority of mapping. Valid values: 1-4 Higher
+ * the number, higher the priority
+ */
+ uint8_t lcos_map_pri;
+ /*
+ * This value controls the priority of mapping. Valid values: 1-4 Higher
+ * the number, higher the priority
+ */
+ uint8_t tunnel_pri2cos_map_pri;
+ /*
+ * This value controls the priority of mapping. Valid values: 1-4 Higher
+ * the number, higher the priority
+ */
+ uint8_t dscp2pri_map_pri;
+ /*
+ * This value controls the priority of mapping. Valid values: 1-4 Higher
+ * the number, higher the priority
+ */
+ uint16_t rx_ts_capture_ptp_msg_type;
+ /*
+ * This is a 16-bit bit mask that is used to request a specific
+ * configuration of time stamp capture of PTP messages on the receive
+ * side of this port. This field shall be ignored if the
+ * ptp_rx_ts_capture_enable flag is not set in this command. Otherwise,
+ * if bit 'i' is set, then the HWRM is being requested to configure the
+ * receive side of the port to capture the time stamp of every received
+ * PTP message with messageType field value set to i.
+ */
+ uint16_t tx_ts_capture_ptp_msg_type;
+ /*
+ * This is a 16-bit bit mask that is used to request a specific
+ * configuration of time stamp capture of PTP messages on the transmit
+ * side of this port. This field shall be ignored if the
+ * ptp_tx_ts_capture_enable flag is not set in this command. Otherwise,
+ * if bit 'i' is set, then the HWRM is being requested to configure the
+ * transmit sied of the port to capture the time stamp of every
+ * transmitted PTP message with messageType field value set to i.
+ */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_port_mac_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t mru;
+ /*
+ * This is the configured maximum length of Ethernet packet payload that
+ * is allowed to be received on the port. This value does not include
+ * the number of bytes used by Ethernet header and trailer (CRC).
+ */
+ uint16_t mtu;
+ /*
+ * This is the configured maximum length of Ethernet packet payload that
+ * is allowed to be transmitted on the port. This value does not include
+ * the number of bytes used by Ethernet header and trailer (CRC).
+ */
+ uint8_t ipg;
+ /* Current configuration of the IPG value. */
+ uint8_t lpbk;
+ /* Current value of the loopback value. */
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that host
+ * data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that port
+ * logic will send packets back out the transmitter that are
+ * received.
+ */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ uint8_t unused_0;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_mac_qcfg */
+/* Description: This command queries the MAC block for the port. */
+/* Input (24 bytes) */
+
+struct hwrm_port_mac_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is to be configured. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_port_mac_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t mru;
+ /*
+ * This is the configured maximum length of Ethernet packet payload that
+ * is allowed to be received on the port. This value does not include
+ * the number of bytes used by the Ethernet header and trailer (CRC).
+ */
+ uint16_t mtu;
+ /*
+ * This is the configured maximum length of Ethernet packet payload that
+ * is allowed to be transmitted on the port. This value does not include
+ * the number of bytes used by the Ethernet header and trailer (CRC).
+ */
+ uint8_t ipg;
+ /* The minimum IPG that will be sent between packets by this port. */
+ uint8_t lpbk;
+ /* The loopback setting for the MAC. */
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that host
+ * data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that port
+ * logic will send packets back out the transmitter that are
+ * received.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ uint8_t ivlan_pri2cos_map_pri;
+ /*
+ * Priority of pri to CoS mapping. Valid values: 1-4 Higher the number,
+ * higher the priority Value 0 indicates that this mapping is not used.
+ */
+ uint8_t lcos_map_pri;
+ /*
+ * Priority of local CoS to PRI mapping. Valid values: 1-4 Higher the
+ * number, higher the priority Value 0 indicates that this mapping is
+ * not used.
+ */
+ uint8_t tunnel_pri2cos_map_pri;
+ /*
+ * Priority of tunnel PRI to CoS mapping. Valid values: 1-4 Higher the
+ * number, higher the priority Value 0 indicates that this mapping is
+ * not used.
+ */
+ uint8_t dscp2pri_map_pri;
+ /*
+ * Priority of DSCP to PRI mapping. Valid values: 1-4 Higher the number,
+ * higher the priority Value 0 indicates that this mapping is not used.
+ */
+ uint16_t rx_ts_capture_ptp_msg_type;
+ /*
+ * This is a 16-bit bit mask that represents the current configuration
+ * of time stamp capture of PTP messages on the receive side of this
+ * port. If bit 'i' is set, then the receive side of the port is
+ * configured to capture the time stamp of every received PTP message
+ * with messageType field value set to i. If all bits are set to 0 (i.e.
+ * field value set 0), then the receive side of the port is not
+ * configured to capture timestamp for PTP messages. If all bits are set
+ * to 1, then the receive side of the port is configured to capture
+ * timestamp for all PTP messages.
+ */
+ uint16_t tx_ts_capture_ptp_msg_type;
+ /*
+ * This is a 16-bit bit mask that represents the current configuration
+ * of time stamp capture of PTP messages on the transmit side of this
+ * port. If bit 'i' is set, then the transmit side of the port is
+ * configured to capture the time stamp of every received PTP message
+ * with messageType field value set to i. If all bits are set to 0 (i.e.
+ * field value set 0), then the transmit side of the port is not
+ * configured to capture timestamp for PTP messages. If all bits are set
+ * to 1, then the transmit side of the port is configured to capture
+ * timestamp for all PTP messages.
+ */
+ uint8_t unused_0;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_qstats */
+/* Description: This function returns per port Ethernet statistics. */
+/* Input (40 bytes) */
+
+struct hwrm_port_qstats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2[3];
+ uint8_t unused_3;
+ uint64_t tx_stat_host_addr;
+ /* This is the host address where Tx port statistics will be stored */
+ uint64_t rx_stat_host_addr;
+ /* This is the host address where Rx port statistics will be stored */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_port_qstats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t tx_stat_size;
+ /* The size of TX port statistics block in bytes. */
+ uint16_t rx_stat_size;
+ /* The size of RX port statistics block in bytes. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_lpbk_qstats */
+/* Description: This function returns loopback statistics. */
+/* Input (16 bytes) */
+
+struct hwrm_port_lpbk_qstats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (96 bytes) */
+
+struct hwrm_port_lpbk_qstats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t lpbk_ucast_frames;
+ /* Number of transmitted unicast frames */
+ uint64_t lpbk_mcast_frames;
+ /* Number of transmitted multicast frames */
+ uint64_t lpbk_bcast_frames;
+ /* Number of transmitted broadcast frames */
+ uint64_t lpbk_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t lpbk_mcast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t lpbk_bcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t tx_stat_discard;
+ /* Total Tx Drops for loopback traffic reported by STATS block */
+ uint64_t tx_stat_error;
+ /* Total Tx Error Drops for loopback traffic reported by STATS block */
+ uint64_t rx_stat_discard;
+ /* Total Rx Drops for loopback traffic reported by STATS block */
+ uint64_t rx_stat_error;
+ /* Total Rx Error Drops for loopback traffic reported by STATS block */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_clr_stats */
+/*
+ * Description: This function clears per port statistics. The HWRM shall not
+ * allow a VF driver to clear port statistics. The HWRM shall not allow a PF
+ * driver to clear port statistics in a partitioning mode. The HWRM may allow a
+ * PF driver to clear port statistics in the non-partitioning mode.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_port_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_port_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_lpbk_clr_stats */
+/*
+ * Description: This function clears loopback statistics. The HWRM shall not
+ * allow a VF driver to clear loopback statistics. The HWRM shall not allow a PF
+ * driver to clear loopback statistics in a partitioning mode. The HWRM may
+ * allow a PF driver to clear loopback statistics in the non-partitioning mode.
+ */
+/* Input (16 bytes) */
+
+struct hwrm_port_lpbk_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_port_lpbk_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_blink_led */
+/*
+ * Description: This function blinks the port LED for the specified number of
+ * times.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_port_blink_led_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t num_blinks;
+ /* Number of blinks. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_port_blink_led_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_ts_query */
+/*
+ * Description: This function is used to read timestamp information captured for
+ * PTP messages on this port.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_port_ts_query_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_LAST HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_port_ts_query_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t ptp_msg_ts;
+ /* Timestamp value of PTP message captured. */
+ uint16_t ptp_msg_seqid;
+ /* Sequence ID of the PTP message captured. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_phy_qcaps */
+/*
+ * Description: This function is used to query the current capabilities of PHY
+ * on this link.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_port_phy_qcaps_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_port_phy_qcaps_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t eee_supported;
+ /*
+ * Reserved field. The HWRM shall set this field to 0. An HWRM client
+ * shall ignore this field.
+ */
+ /*
+ * If set to 1, then this field indicates that the link is capable of
+ * supporting EEE.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_EEE_SUPPORTED UINT32_C(0x1)
+ /*
+ * Reserved field. The HWRM shall set this field to 0. An HWRM client
+ * shall ignore this field.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD1_MASK UINT32_C(0xfe)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD1_SFT 1
+ uint8_t unused_0;
+ uint16_t supported_speeds_force_mode;
+ /*
+ * This is a bit mask to indicate what speeds are supported as forced
+ * speeds on this link. For each speed that can be forced on this link,
+ * the corresponding mask bit shall be set to '1'.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MBHD UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GB UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2GB UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2_5GB UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10GB UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_20GB UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_25GB UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_40GB UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_50GB UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100GB UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MBHD UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB UINT32_C(0x2000)
+ uint16_t supported_speeds_auto_mode;
+ /*
+ * This is a bit mask to indicate what speeds are supported for
+ * autonegotiation on this link. For each speed that can be
+ * autonegotiated on this link, the corresponding mask bit shall be set
+ * to '1'.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MBHD UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GB UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2GB UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2_5GB UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10GB UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_20GB UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_25GB UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_40GB UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_50GB UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100GB UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MBHD UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB UINT32_C(0x2000)
+ uint16_t supported_speeds_eee_mode;
+ /*
+ * This is a bit mask to indicate what speeds are supported for EEE on
+ * this link. For each speed that can be autonegotiated when EEE is
+ * enabled on this link, the corresponding mask bit shall be set to '1'.
+ * This field is only valid when the eee_suppotred is set to '1'.
+ */
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD1 UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_100MB UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD2 UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_1GB UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD3 UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD4 UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_10GB UINT32_C(0x40)
+ uint32_t tx_lpi_timer_low;
+ /*
+ * Reserved field. The HWRM shall set this field to 0. An HWRM client
+ * shall ignore this field.
+ */
+ /*
+ * The lowest value of TX LPI timer that can be set on this link when
+ * EEE is enabled. This value is in microseconds. This field is valid
+ * only when_eee_supported is set to '1'.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_MASK UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_SFT 0
+ /*
+ * Reserved field. The HWRM shall set this field to 0. An HWRM client
+ * shall ignore this field.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_MASK UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_SFT 24
+ uint32_t valid_tx_lpi_timer_high;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ /*
+ * The highest value of TX LPI timer that can be set on this link when
+ * EEE is enabled. This value is in microseconds. This field is valid
+ * only when_eee_supported is set to '1'.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_MASK UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_SFT 0
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24
+} __attribute__((packed));
+
+/* hwrm_queue_qportcfg */
+/*
+ * Description: This function is called by a driver to query queue configuration
+ * of a port. # The HWRM shall at least advertise one queue with lossy service
+ * profile. # The driver shall use this command to query queue ids before
+ * configuring or using any queues. # If a service profile is not set for a
+ * queue, then the driver shall not use that queue without configuring a service
+ * profile for it. # If the driver is not allowed to configure service profiles,
+ * then the driver shall only use queues for which service profiles are pre-
+ * configured.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_queue_qportcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
+ uint16_t port_id;
+ /*
+ * Port ID of port for which the queue configuration is being queried.
+ * This field is only required when sent by IPC.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+
+struct hwrm_queue_qportcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t max_configurable_queues;
+ /* The maximum number of queues that can be configured. */
+ uint8_t max_configurable_lossless_queues;
+ /* The maximum number of lossless queues that can be configured. */
+ uint8_t queue_cfg_allowed;
+ /*
+ * 0 - Not allowed. Non-zero - Allowed. If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure queues using
+ * hwrm_queue_cfg.
+ */
+ uint8_t queue_buffers_cfg_allowed;
+ /*
+ * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure queue buffers
+ * using hwrm_queue_buffers_cfg.
+ */
+ uint8_t queue_pfcenable_cfg_allowed;
+ /*
+ * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure PFC using
+ * hwrm_queue_pfcenable_cfg.
+ */
+ uint8_t queue_pri2cos_cfg_allowed;
+ /*
+ * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure Priority to CoS
+ * mapping using hwrm_queue_pri2cos_cfg.
+ */
+ uint8_t queue_cos2bw_cfg_allowed;
+ /*
+ * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure CoS Bandwidth
+ * configuration using hwrm_queue_cos2bw_cfg.
+ */
+ uint8_t queue_id0;
+ /* ID of CoS Queue 0. FF - Invalid id */
+ uint8_t queue_id0_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t queue_id1;
+ /* ID of CoS Queue 1. FF - Invalid id */
+ uint8_t queue_id1_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t queue_id2;
+ /* ID of CoS Queue 2. FF - Invalid id */
+ uint8_t queue_id2_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t queue_id3;
+ /* ID of CoS Queue 3. FF - Invalid id */
+ uint8_t queue_id3_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t queue_id4;
+ /* ID of CoS Queue 4. FF - Invalid id */
+ uint8_t queue_id4_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t queue_id5;
+ /* ID of CoS Queue 5. FF - Invalid id */
+ uint8_t queue_id5_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t queue_id6;
+ /* ID of CoS Queue 6. FF - Invalid id */
+ uint8_t queue_id6_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t queue_id7;
+ /* ID of CoS Queue 7. FF - Invalid id */
+ uint8_t queue_id7_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_qcfg */
+/*
+ * Description: This function is called by a driver to query a queue
+ * configuration.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_queue_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_LAST HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX
+ uint32_t queue_id;
+ /* Queue ID of the queue. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_queue_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t queue_len;
+ /* This value is a the estimate packet length used in the TX arbiter. */
+ uint8_t service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_cfg */
+/* Description: This function is called by a driver to configure a queue. */
+/* Input (40 bytes) */
+
+struct hwrm_queue_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_LAST HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_RX
+ uint32_t enables;
+ /* This bit must be '1' for the dflt_len field to be configured. */
+ #define HWRM_QUEUE_CFG_INPUT_ENABLES_DFLT_LEN UINT32_C(0x1)
+ /* This bit must be '1' for the service_profile field to be configured. */
+ #define HWRM_QUEUE_CFG_INPUT_ENABLES_SERVICE_PROFILE UINT32_C(0x2)
+ uint32_t queue_id;
+ /* Queue ID of queue that is to be configured by this function. */
+ uint32_t dflt_len;
+ /*
+ * This value is a the estimate packet length used in the TX arbiter.
+ * Set to 0xFF... (All Fs) to not adjust this value.
+ */
+ uint8_t service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_queue_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_buffers_qcfg */
+/*
+ * Description: This function is called by a driver to query configuration of
+ * the buffers assigned to a queue.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_queue_buffers_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_QUEUE_BUFFERS_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_BUFFERS_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_BUFFERS_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_BUFFERS_QCFG_INPUT_FLAGS_PATH_LAST HWRM_QUEUE_BUFFERS_QCFG_INPUT_FLAGS_PATH_RX
+ uint32_t queue_id;
+ /* Queue ID of queue that is to be configured by this function. */
+} __attribute__((packed));
+
+/* Output (40 bytes) */
+
+struct hwrm_queue_buffers_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t reserved;
+ /* Number of bytes allocated as reserved space for this queue. */
+ uint32_t shared;
+ /*
+ * Number of bytes of shared buffer space for this queue. The changing
+ * of shared buffer size for one CoS may create an adverse effect on
+ * other CoSs sharing the same buffer. It is recommended that the driver
+ * does not modify the shared mbuf size without understanding the
+ * consequence of it.
+ */
+ uint32_t xoff;
+ /*
+ * XOFF threshold of the queue. This is a high threshold value used to
+ * trigger XOFF.
+ */
+ uint32_t xon;
+ /*
+ * XON threshold of the queue. This is the low threshold value used to
+ * trigger XON.
+ */
+ uint32_t full;
+ /*
+ * FULL threshold of the queue. At this threshold, buffers allocated for
+ * this queue are full. Once this condition is asserted, packets on that
+ * queue are dropped.
+ */
+ uint32_t notfull;
+ /*
+ * NOTFULL threshold of the queue. This threshold is used for the de-
+ * assertion of buffers full condition.
+ */
+ uint32_t max;
+ /*
+ * The maximum number of bytes that will be allowed to be consumed by
+ * the queue. This value is the sum of both the number of bytes reserved
+ * for this queue and the maximum number of bytes of shared buffers
+ * allowed to be consumed by this queue.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_buffers_cfg */
+/*
+ * Description: This function is called by a driver to configure the buffering
+ * for a queue.
+ */
+/* Input (56 bytes) */
+
+struct hwrm_queue_buffers_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_FLAGS_PATH_LAST HWRM_QUEUE_BUFFERS_CFG_INPUT_FLAGS_PATH_RX
+ uint32_t enables;
+ /* This bit must be '1' for the reserved field to be configured. */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_ENABLES_RESERVED UINT32_C(0x1)
+ /* This bit must be '1' for the shared field to be configured. */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_ENABLES_SHARED UINT32_C(0x2)
+ /* This bit must be '1' for the xoff field to be configured. */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_ENABLES_XOFF UINT32_C(0x4)
+ /* This bit must be '1' for the xon field to be configured. */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_ENABLES_XON UINT32_C(0x8)
+ /* This bit must be '1' for the full field to be configured. */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_ENABLES_FULL UINT32_C(0x10)
+ /* This bit must be '1' for the notfull field to be configured. */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_ENABLES_NOTFULL UINT32_C(0x20)
+ /* This bit must be '1' for the max field to be configured. */
+ #define HWRM_QUEUE_BUFFERS_CFG_INPUT_ENABLES_MAX UINT32_C(0x40)
+ uint32_t queue_id;
+ /* Queue ID of queue that is to be configured by this function. */
+ uint32_t reserved;
+ /* Number of bytes to be allocated as reserved space for this queue. */
+ uint32_t shared;
+ /*
+ * Number of bytes of shared buffer space for this queue. The changing
+ * of shared buffer size for one CoS may create an adverse effect on
+ * other CoSs sharing the same buffer. It is recommended that the driver
+ * does not modify the shared mbuf size without understanding the
+ * consequence of it.
+ */
+ uint32_t xoff;
+ /*
+ * XOFF threshold of the queue. This is a high threshold value used to
+ * trigger XOFF.
+ */
+ uint32_t xon;
+ /*
+ * XON threshold of the queue. This is the low threshold value used to
+ * trigger XON.
+ */
+ uint32_t full;
+ /*
+ * FULL threshold of the queue. At this threshold, buffers allocated for
+ * this queue are full. Once this condition is asserted, packets on that
+ * queue are dropped.
+ */
+ uint32_t notfull;
+ /*
+ * NOTFULL threshold of the queue. This threshold is used for the de-
+ * assertion of buffers full condition.
+ */
+ uint32_t max;
+ /*
+ * The maximum number of bytes that will be allowed to be consumed by
+ * the queue. This value is the sum of both the number of bytes reserved
+ * for this queue and the maximum number of bytes of shared buffers
+ * allowed to be consumed by this queue.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_queue_buffers_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_pfcenable_qcfg */
+/*
+ * Description: This function is called by a driver to query PFC configuration
+ * for different priorities on that port. This mapping can be different on
+ * different ports.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_queue_pfcenable_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /*
+ * Port ID of port for which the table is being configured. The HWRM
+ * needs to check whether this function is allowed to configure pri2cos
+ * mapping on this port.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_queue_pfcenable_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t flags;
+ /* If set to 1, then PFC is enabled on PRI 0. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_ENABLED UINT32_C(0x1)
+ /* If set to 1, then PFC is enabled on PRI 1. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_ENABLED UINT32_C(0x2)
+ /* If set to 1, then PFC is enabled on PRI 2. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_ENABLED UINT32_C(0x4)
+ /* If set to 1, then PFC is enabled on PRI 3. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_ENABLED UINT32_C(0x8)
+ /* If set to 1, then PFC is enabled on PRI 4. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_ENABLED UINT32_C(0x10)
+ /* If set to 1, then PFC is enabled on PRI 5. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_ENABLED UINT32_C(0x20)
+ /* If set to 1, then PFC is enabled on PRI 6. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_ENABLED UINT32_C(0x40)
+ /* If set to 1, then PFC is enabled on PRI 7. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_ENABLED UINT32_C(0x80)
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_pfcenable_cfg */
+/*
+ * Description: This function is called by a driver to configure the PFC enabled
+ * for different priorities on that port. This mapping can be different on
+ * different ports.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_queue_pfcenable_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /* If set to 1, then PFC is requested to be enabled on PRI 0. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_ENABLED UINT32_C(0x1)
+ /* If set to 1, then PFC is requested to be enabled on PRI 1. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED UINT32_C(0x2)
+ /* If set to 1, then PFC is requested to be enabled on PRI 2. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED UINT32_C(0x4)
+ /* If set to 1, then PFC is requested to be enabled on PRI 3. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED UINT32_C(0x8)
+ /* If set to 1, then PFC is requested to be enabled on PRI 4. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED UINT32_C(0x10)
+ /* If set to 1, then PFC is requested to be enabled on PRI 5. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED UINT32_C(0x20)
+ /* If set to 1, then PFC is requested to be enabled on PRI 6. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED UINT32_C(0x40)
+ /* If set to 1, then PFC is requested to be enabled on PRI 7. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED UINT32_C(0x80)
+ uint16_t port_id;
+ /*
+ * Port ID of port for which the table is being configured. The HWRM
+ * needs to check whether this function is allowed to configure pri2cos
+ * mapping on this port.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_queue_pfcenable_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_pri2cos_qcfg */
+/*
+ * Description: This function is called by a driver to query configuration of
+ * the priority to CoS queue mapping on the transmit side and receive side. This
+ * mapping can be different in each direction (TX or RX). This mapping can be
+ * different on different ports. Each CoS queue represents a Traffic Class (TC)
+ * on that port.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_queue_pri2cos_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_LAST HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX
+ /*
+ * When this bit is set to '1', the mapping is requested for inner VLAN
+ * PRI.
+ */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2)
+ uint8_t port_id;
+ /*
+ * Port ID of port for which the table is being configured. The HWRM
+ * needs to check whether this function is allowed to configure pri2cos
+ * mapping on this port.
+ */
+ uint8_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_queue_pri2cos_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t pri0_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 0. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri1_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 1. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri2_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 2 This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri3_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 3. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri4_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 4. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri5_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 5. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri6_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 6. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri7_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 7. This value can only be changed
+ * before traffic has started.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_pri2cos_cfg */
+/*
+ * Description: This function is called by a driver to configure the priority to
+ * CoS queue mapping on the transmit side and receive side. This mapping can be
+ * different in each direction (TX or RX). This mapping can be different on
+ * different ports. Each CoS queue represents a Traffic Class (TC) on that port.
+ * This command configures the VLAN PRI-to-TC mapping for a specific port in
+ * specific direction.
+ */
+/* Input (40 bytes) */
+
+struct hwrm_queue_pri2cos_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_LAST HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_RX
+ /* When this bit is '1', the mapping is for inner VLAN PRI. */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x2)
+ uint32_t enables;
+ uint8_t port_id;
+ /*
+ * Port ID of port for which the table is being configured. The HWRM
+ * needs to check whether this function is allowed to configure pri2cos
+ * mapping on this port.
+ */
+ uint8_t pri0_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 0. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri1_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 1. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri2_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 2 This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri3_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 3. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri4_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 4. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri5_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 5. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri6_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 6. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t pri7_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 7. This value can only be changed
+ * before traffic has started.
+ */
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_queue_pri2cos_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_cos2bw_qcfg */
+/*
+ * Description: This function is called by a driver to query the BW to CoS queue
+ * mapping on the transmit side of a specific port. This mapping can be
+ * different on different ports. Each CoS queue represents a Traffic Class (TC)
+ * on that port. Each traffic class can be assigned a valid combination of the
+ * following: - Minimum bandwidth - Maximum bandwidth - Transmission selection
+ * algorithm (TSA) - Priority Level (only applies to strict priority COS) -
+ * Bandwidth weight # A CoS can be SP or non-SP: A SP CoS always gets the strict
+ * priority. Is an COS min BW is set to 0x0 then it is considered to be non-SP;
+ * this is a valid configuration. Note: SP provides lower latency in addition to
+ * reserved bandwidth # For both SP CoS and non-SP CoS, min BW can be specified
+ * to reserve specific amount of the port BW. # The min BW specified for a CoS
+ * shall not exceed max port bandwidth. # The total of min BWs specified for all
+ * CoS shall not exceed max port bandwidth. # For any non-SP CoS, the minimum
+ * bandwidth guarantees are subject to round-robin scheduling. This allows BW
+ * reservation with anti-starvation; one CoS will not block another CoS using
+ * RR. Note: The bandwidth guarantees for any non-SP CoS are met after servicing
+ * all SP CoS. # An SP CoS can potentially starve other lower priority SP CoS
+ * and non-SP CoS queues. This can occur to the extent the SP min exceeds the
+ * available port BW. # For any CoS, max BW can be specified to limit the BW
+ * consumed by the CoS. # The max BW specified for a CoS shall not exceed the
+ * max port bandwidth. # The WFQ provides a mechanism for sharing available
+ * bandwidth beyond the reserved minimums configured for each CoS. The WFQ
+ * scheduler is used to provide the percentages of remaining bandwidth after: *
+ * first servicing the reserved bandwidth for all SP CoS, * followed by the
+ * reserved bandwidth for all non-SP CoS * All CoS may participate in the WFQ #
+ * If a CoS does not have a configured max BW it may use all available bandwidth
+ * up to the max port bandwidth Minimum Bandwidth (min BW): # This is the
+ * guaranteed bandwidth for the COS. # A value of 0x0 is valid and it means that
+ * this COS is not guaranteed any bandwidth. A value of 0xFF.. (all Fs) means
+ * min BW is not specified. When the min BW is not specified, the HWRM can set
+ * it to any value it considers appropriate. Note: For a non-SP COS, the HWRM
+ * should set min BW to 0 when the min BW is not specified. For an SP COS, the
+ * HWRM should set min BW to some small value when the min BW is not specified.
+ * Maximum Bandwidth: # This is the bandwidth limit of the COS. # Values 0x0 and
+ * 0xFF.. (all Fs) are considered unspecified and the HWRM will set the maximum
+ * bandwidth to maximum port bandwidth. Priority Level: # It applies only to SP.
+ * # This parameter is ignored for non-SP. # 0-7 are valid values (higher value
+ * means higher priority) # A priority level can be assigned to at most one SP.
+ * # Invalid priority levels assignment for SPs shall result in failure.
+ * Additional notes: # The HWRM may have to use min and (max - min) to set
+ * appropriate counters of hardware rate limiters. # The bandwidth percentage as
+ * specified in the DCB TC BW assignment should be used by the driver to specify
+ * maximum bandwidth and bandwidth weight for a COS. For example, the driver
+ * should set max BW to 20 Gbps and weight to 50 for two COSs when these two
+ * COSs are assigned 50% share of 40 Gbps max port bandwidth.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_queue_cos2bw_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /*
+ * Port ID of port for which the table is being configured. The HWRM
+ * needs to check whether this function is allowed to configure TC BW
+ * assignment on this port.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (112 bytes) */
+
+struct hwrm_queue_cos2bw_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t queue_id0;
+ /* ID of CoS Queue 0. */
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint32_t queue_id0_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id0_max_bw;
+ /*
+ * Maximum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id0_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id0_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id0_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id1;
+ /* ID of CoS Queue 1. */
+ uint32_t queue_id1_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id1_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id1_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id1_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id1_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id2;
+ /* ID of CoS Queue 2. */
+ uint32_t queue_id2_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id2_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id2_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id2_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id2_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id3;
+ /* ID of CoS Queue 3. */
+ uint32_t queue_id3_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id3_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id3_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id3_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id3_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id4;
+ /* ID of CoS Queue 4. */
+ uint32_t queue_id4_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id4_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id4_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id4_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id4_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id5;
+ /* ID of CoS Queue 5. */
+ uint32_t queue_id5_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id5_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id5_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id5_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id5_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id6;
+ /* ID of CoS Queue 6. */
+ uint32_t queue_id6_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id6_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id6_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id6_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id6_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id7;
+ /* ID of CoS Queue 7. */
+ uint32_t queue_id7_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id7_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id7_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id7_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id7_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_cos2bw_cfg */
+/*
+ * Description: This function is called by a driver to configure the BW to CoS
+ * queue mapping on the transmit side of a specific port. This mapping can be
+ * different on different ports. Each CoS queue represents a Traffic Class (TC)
+ * on that port. Each traffic class can be assigned a valid combination of the
+ * following: - Minimum bandwidth - Maximum bandwidth - Transmission selection
+ * algorithm (TSA) - Priority Level (only applies to strict priority COS) -
+ * Bandwidth weight # A CoS can be SP or non-SP: A SP CoS always gets the strict
+ * priority. Is an COS min BW is set to 0x0 then it is considered to be non-SP;
+ * this is a valid configuration. Note: SP provides lower latency in addition to
+ * reserved bandwidth # For both SP CoS and non-SP CoS, min BW can be specified
+ * to reserve specific amount of the port BW. # The min BW specified for a CoS
+ * shall not exceed max port bandwidth. # The total of min BWs specified for all
+ * CoS shall not exceed max port bandwidth. # For any non-SP CoS, the minimum
+ * bandwidth guarantees are subject to round-robin scheduling. This allows BW
+ * reservation with anti-starvation; one CoS will not block another CoS using
+ * RR. Note: The bandwidth guarantees for any non-SP CoS are met after servicing
+ * all SP CoS. # An SP CoS can potentially starve other lower priority SP CoS
+ * and non-SP CoS queues. This can occur to the extent the SP min exceeds the
+ * available port BW. # For any CoS, max BW can be specified to limit the BW
+ * consumed by the CoS. # The max BW specified for a CoS shall not exceed the
+ * max port bandwidth. # The WFQ provides a mechanism for sharing available
+ * bandwidth beyond the reserved minimums configured for each CoS. The WFQ
+ * scheduler is used to provide the percentages of remaining bandwidth after: -
+ * first servicing the reserved bandwidth for all SP CoS, - followed by the
+ * reserved bandwidth for all non-SP CoS - All CoS may participate in the WFQ #
+ * If a CoS does not have a configured max BW it may use all available bandwidth
+ * up to the max port bandwidth Minimum Bandwidth (min BW): # This is the
+ * guaranteed bandwidth for the COS. # A value of 0x0 is valid and it means that
+ * this COS is not guaranteed any bandwidth. A value of 0xFF.. (all Fs) means
+ * min BW is not specified. When the min BW is not specified, the HWRM can set
+ * it to any value it considers appropriate. Note: For a non-SP COS, the HWRM
+ * should set min BW to 0 when the min BW is not specified. For an SP COS, the
+ * HWRM should set min BW to some small value when the min BW is not specified.
+ * Maximum Bandwidth: # This is the bandwidth limit of the COS. # Values 0x0 and
+ * 0xFF.. (all Fs) are considered unspecified and the HWRM will set the maximum
+ * bandwidth to maximum port bandwidth. Priority Level: # It applies only to SP.
+ * # This parameter is ignored for non-SP. # 0-7 are valid values (higher value
+ * means higher priority) # A priority level can be assigned to at most one SP.
+ * # Invalid priority levels assignment for SPs shall result in failure.
+ * Additional notes: # The HWRM may have to use min and (max - min) to set
+ * appropriate counters of hardware rate limiters. # The bandwidth percentage as
+ * specified in the DCB TC BW assignment should be used by the driver to specify
+ * maximum bandwidth and bandwidth weight for a COS. For example, the driver
+ * should set max BW to 20 Gbps and weight to 50 for two COSs when these two
+ * COSs are assigned 50% share of 40 Gbps max port bandwidth.
+ */
+/* Input (128 bytes) */
+
+struct hwrm_queue_cos2bw_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the cos_queue_id0_valid field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID0_VALID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the cos_queue_id1_valid field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID1_VALID UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cos_queue_id2_valid field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID2_VALID UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the cos_queue_id3_valid field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID3_VALID UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the cos_queue_id4_valid field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID4_VALID UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the cos_queue_id5_valid field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID5_VALID UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the cos_queue_id6_valid field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID6_VALID UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the cos_queue_id7_valid field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID7_VALID UINT32_C(0x80)
+ uint16_t port_id;
+ /*
+ * Port ID of port for which the table is being configured. The HWRM
+ * needs to check whether this function is allowed to configure TC BW
+ * assignment on this port.
+ */
+ uint8_t queue_id0;
+ /* ID of CoS Queue 0. */
+ uint8_t unused_0;
+ uint32_t queue_id0_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id0_max_bw;
+ /*
+ * Maximum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id0_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id0_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id0_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id1;
+ /* ID of CoS Queue 1. */
+ uint32_t queue_id1_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id1_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id1_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id1_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id1_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id2;
+ /* ID of CoS Queue 2. */
+ uint32_t queue_id2_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id2_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id2_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id2_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id2_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id3;
+ /* ID of CoS Queue 3. */
+ uint32_t queue_id3_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id3_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id3_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id3_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id3_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id4;
+ /* ID of CoS Queue 4. */
+ uint32_t queue_id4_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id4_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id4_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id4_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id4_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id5;
+ /* ID of CoS Queue 5. */
+ uint32_t queue_id5_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id5_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id5_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id5_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id5_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id6;
+ /* ID of CoS Queue 6. */
+ uint32_t queue_id6_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id6_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id6_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id6_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id6_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id7;
+ /* ID of CoS Queue 7. */
+ uint32_t queue_id7_min_bw;
+ /*
+ * Minimum BW allocated to CoS Queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint32_t queue_id7_max_bw;
+ /*
+ * Maximum BW allocated to CoS queue in Mbps. The HWRM will translate
+ * this value into byte counter and time interval used for this COS
+ * inside the device.
+ */
+ uint8_t queue_id7_tsa_assign;
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS UINT32_C(0x1)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST UINT32_C(0xff)
+ uint8_t queue_id7_pri_lvl;
+ /*
+ * Priority level for strict priority. Valid only when the tsa_assign is
+ * 0 - Strict Priority (SP) 0..7 - Valid values. 8..255 - Reserved.
+ */
+ uint8_t queue_id7_bw_weight;
+ /*
+ * Weight used to allocate remaining BW for this COS after servicing
+ * guaranteed bandwidths for all COS.
+ */
+ uint8_t unused_1[5];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_queue_cos2bw_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_alloc */
+/*
+ * Description: This VNIC is a resource in the RX side of the chip that is used
+ * to represent a virtual host "interface". # At the time of VNIC allocation or
+ * configuration, the function can specify whether it wants the requested VNIC
+ * to be the default VNIC for the function or not. # If a function requests
+ * allocation of a VNIC for the first time and a VNIC is successfully allocated
+ * by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC
+ * for that function. # The default VNIC shall be used for the default action
+ * for a partition or function. # For each VNIC allocated on a function, a
+ * mapping on the RX side to map the allocated VNIC to source virtual interface
+ * shall be performed by the HWRM. This should be hidden to the function driver
+ * requesting the VNIC allocation. This enables broadcast/multicast replication
+ * with source knockout. # If multicast replication with source knockout is
+ * enabled, then the internal VNIC to SVIF mapping data structures shall be
+ * programmed at the time of VNIC allocation.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_vnic_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', this VNIC is requested to be the default VNIC
+ * for this function.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_free */
+/*
+ * Description: Free a VNIC resource. Idle any resources associated with the
+ * VNIC as well as the VNIC. Reset and release all resources associated with the
+ * VNIC.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_vnic_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_cfg */
+/* Description: Configure the RX VNIC structure. */
+/* Input (40 bytes) */
+
+struct hwrm_vnic_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is requested to be the default VNIC
+ * for the function.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is being configured to strip VLAN in
+ * the RX path. If set to '0', then VLAN stripping is disabled on this
+ * VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is being configured to buffer receive
+ * packets in the hardware until the host posts new receive buffers. If
+ * set to '0', then bd_stall is being configured to be disabled on this
+ * VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is being configured to receive both
+ * RoCE and non-RoCE traffic. If set to '0', then this VNIC is not
+ * configured to be operating in dual VNIC mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is requested to be configured
+ * to receive only RoCE traffic. If this flag is set to '0', then this
+ * flag shall be ignored by the HWRM. If roce_dual_vnic_mode flag is set
+ * to '1', then the HWRM client shall not set this flag to '1'.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain application
+ * (e.g. Receive Flow Steering) where exact match is used to direct
+ * packets to a VNIC with one destination ring group only, there is no
+ * need to configure RSS indirection table for that VNIC as only one
+ * destination ring group is used. This flag is used to enable a mode
+ * where RSS is enabled in the VNIC using a RSS context for computing
+ * RSS hash but the RSS indirection table is not configured using
+ * hwrm_vnic_rss_cfg. If this mode is enabled, then the driver should
+ * not program RSS indirection table for the RSS context that is used
+ * for computing RSS hash only.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
+ uint32_t enables;
+ /* This bit must be '1' for the dflt_ring_grp field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP UINT32_C(0x1)
+ /* This bit must be '1' for the rss_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE UINT32_C(0x2)
+ /* This bit must be '1' for the cos_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE UINT32_C(0x4)
+ /* This bit must be '1' for the lb_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE UINT32_C(0x8)
+ /* This bit must be '1' for the mru field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU UINT32_C(0x10)
+ uint16_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t dflt_ring_grp;
+ /*
+ * Default Completion ring for the VNIC. This ring will be chosen if
+ * packet does not match any RSS rules and if there is no COS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if there is no
+ * RSS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if there is no
+ * COS rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * RSS ID for load balancing rule/table structure. 0xFF... (All Fs) if
+ * there is no LB rule.
+ */
+ uint16_t mru;
+ /*
+ * The maximum receive unit of the vnic. Each vnic is associated with a
+ * function. The vnic mru value overwrites the mru setting of the
+ * associated function. The HWRM shall make sure that vnic mru does not
+ * exceed the mru of the port the function is associated with.
+ */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_qcfg */
+/*
+ * Description: Query the RX VNIC structure. This function can be used by a PF
+ * driver to query its own VNIC resource or VNIC resource of its child VF. This
+ * function can also be used by a VF driver to query its own VNIC resource.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_vnic_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id_valid field to be configured. */
+ #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t vf_id;
+ /* ID of Virtual Function whose VNIC resource is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+
+struct hwrm_vnic_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t dflt_ring_grp;
+ /* Default Completion ring for the VNIC. */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if there is no
+ * RSS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if there is no
+ * COS rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * RSS ID for load balancing rule/table structure. 0xFF... (All Fs) if
+ * there is no LB rule.
+ */
+ uint16_t mru;
+ /* The maximum receive unit of the vnic. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t flags;
+ /* When this bit is '1', the VNIC is the default VNIC for the function. */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to strip VLAN in the RX
+ * path. If set to '0', then VLAN stripping is disabled on this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured to buffer receive
+ * packets in the hardware until the host posts new receive buffers. If
+ * set to '0', then bd_stall is disabled on this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured to receive both RoCE and
+ * non-RoCE traffic. If set to '0', then this VNIC is not configured to
+ * operate in dual VNIC mode.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is configured to receive only
+ * RoCE traffic. When this flag is set to '0', the VNIC is not
+ * configured to receive only RoCE traffic. If roce_dual_vnic_mode flag
+ * and this flag both are set to '1', then it is an invalid
+ * configuration of the VNIC. The HWRM should not allow that type of
+ * mis-configuration by HWRM clients.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain application
+ * (e.g. Receive Flow Steering) where exact match is used to direct
+ * packets to a VNIC with one destination ring group only, there is no
+ * need to configure RSS indirection table for that VNIC as only one
+ * destination ring group is used. When this bit is set to '1', then the
+ * VNIC is enabled in a mode where RSS is enabled in the VNIC using a
+ * RSS context for computing RSS hash but the RSS indirection table is
+ * not configured.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
+ uint32_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_qcaps */
+/*
+ * Description: This function is used to query the capabilities of VNIC
+ * resources.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_vnic_qcaps_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_vnic_qcaps_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t mru;
+ /* The maximum receive unit that is settable on a vnic. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t flags;
+ /* Unused. */
+ /*
+ * When this bit is '1', the capability of stripping VLAN in the RX path
+ * is supported on VNIC(s). If set to '0', then VLAN stripping
+ * capability is not supported on VNIC(s).
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP UINT32_C(0x2)
+ /*
+ * When this bit is '1', the capability to buffer receive packets in the
+ * hardware until the host posts new receive buffers is supported on
+ * VNIC(s). If set to '0', then bd_stall capability is not supported on
+ * VNIC(s).
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP UINT32_C(0x4)
+ /*
+ * When this bit is '1', the capability to receive both RoCE and non-
+ * RoCE traffic on VNIC(s) is supported. If set to '0', then the
+ * capability to receive both RoCE and non-RoCE traffic on VNIC(s) is
+ * not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', the capability to configure a VNIC to
+ * receive only RoCE traffic is supported. When this flag is set to '0',
+ * the VNIC capability to configure to receive only RoCE traffic is not
+ * supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', then the capability to enable a VNIC in
+ * a mode where RSS context without configuring RSS indirection table is
+ * supported (for RSS hash computation). When this bit is set to '0',
+ * then a VNIC can not be configured with a mode to enable RSS context
+ * without configuring RSS indirection table.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP UINT32_C(0x20)
+ uint32_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_tpa_cfg */
+/* Description: This function is used to enable/configure TPA on the VNIC. */
+/* Input (40 bytes) */
+
+struct hwrm_vnic_tpa_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) of non-tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) of tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) according to Windows Receive
+ * Segment Coalescing (RSC) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) according to Linux Generic
+ * Receive Offload (GRO) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) for TCP packets with IP ECN set
+ * to non-zero.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) for GRE tunneled TCP packets
+ * only if all packets have the same GRE sequence.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ UINT32_C(0x20)
+ /*
+ * When this bit is '1' and the GRO mode is enabled, the VNIC shall be
+ * configured to perform transparent packet aggregation (TPA) for
+ * TCP/IPv4 packets with consecutively increasing IPIDs. In other words,
+ * the last packet that is being aggregated to an already existing
+ * aggregation context shall have IPID 1 more than the IPID of the last
+ * packet that was aggregated in that aggregation context.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK UINT32_C(0x40)
+ /*
+ * When this bit is '1' and the GRO mode is enabled, the VNIC shall be
+ * configured to perform transparent packet aggregation (TPA) for TCP
+ * packets with the same TTL (IPv4) or Hop limit (IPv6) value.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK UINT32_C(0x80)
+ uint32_t enables;
+ /* This bit must be '1' for the max_agg_segs field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
+ /* This bit must be '1' for the max_aggs field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
+ /* This bit must be '1' for the max_agg_timer field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
+ /* This bit must be '1' for the min_agg_len field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
+ uint16_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t max_agg_segs;
+ /*
+ * This is the maximum number of TCP segments that can be aggregated
+ * (unit is Log2). Max value is 31.
+ */
+ /* 1 segment */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
+ /* 2 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
+ /* 4 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
+ /* 8 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
+ /* Any segment size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
+ uint16_t max_aggs;
+ /*
+ * This is the maximum number of aggregations this VNIC is allowed (unit
+ * is Log2). Max value is 7
+ */
+ /* 1 aggregation */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
+ /* 2 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
+ /* 4 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
+ /* 8 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
+ /* 16 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
+ /* Any aggregation size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t max_agg_timer;
+ /*
+ * This is the maximum amount of time allowed for an aggregation context
+ * to complete after it was initiated.
+ */
+ uint32_t min_agg_len;
+ /*
+ * This is the minimum amount of payload length required to start an
+ * aggregation context.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_tpa_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_tpa_qcfg */
+/*
+ * Description: This function can be used to query TPA configuration on the
+ * VNIC.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_vnic_tpa_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+
+struct hwrm_vnic_tpa_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is configured to perform transparent
+ * packet aggregation (TPA) of non-tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_TPA UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to perform transparent
+ * packet aggregation (TPA) of tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_ENCAP_TPA UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured to perform transparent
+ * packet aggregation (TPA) according to Windows Receive Segment
+ * Coalescing (RSC) rules.
+ */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_RSC_WND_UPDATE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured to perform transparent
+ * packet aggregation (TPA) according to Linux Generic Receive Offload
+ * (GRO) rules.
+ */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC is configured to perform transparent
+ * packet aggregation (TPA) for TCP packets with IP ECN set to non-zero.
+ */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_AGG_WITH_ECN UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC is configured to perform transparent
+ * packet aggregation (TPA) for GRE tunneled TCP packets only if all
+ * packets have the same GRE sequence.
+ */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ UINT32_C(0x20)
+ /*
+ * When this bit is '1' and the GRO mode is enabled, the VNIC is
+ * configured to perform transparent packet aggregation (TPA) for
+ * TCP/IPv4 packets with consecutively increasing IPIDs. In other words,
+ * the last packet that is being aggregated to an already existing
+ * aggregation context shall have IPID 1 more than the IPID of the last
+ * packet that was aggregated in that aggregation context.
+ */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO_IPID_CHECK UINT32_C(0x40)
+ /*
+ * When this bit is '1' and the GRO mode is enabled, the VNIC is
+ * configured to perform transparent packet aggregation (TPA) for TCP
+ * packets with the same TTL (IPv4) or Hop limit (IPv6) value.
+ */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO_TTL_CHECK UINT32_C(0x80)
+ uint16_t max_agg_segs;
+ /*
+ * This is the maximum number of TCP segments that can be aggregated
+ * (unit is Log2). Max value is 31.
+ */
+ /* 1 segment */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
+ /* 2 segments */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
+ /* 4 segments */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
+ /* 8 segments */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
+ /* Any segment size larger than this is not valid */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
+ uint16_t max_aggs;
+ /*
+ * This is the maximum number of aggregations this VNIC is allowed (unit
+ * is Log2). Max value is 7
+ */
+ /* 1 aggregation */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_1 UINT32_C(0x0)
+ /* 2 aggregations */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_2 UINT32_C(0x1)
+ /* 4 aggregations */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_4 UINT32_C(0x2)
+ /* 8 aggregations */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_8 UINT32_C(0x3)
+ /* 16 aggregations */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_16 UINT32_C(0x4)
+ /* Any aggregation size larger than this is not valid */
+ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_MAX UINT32_C(0x7)
+ uint32_t max_agg_timer;
+ /*
+ * This is the maximum amount of time allowed for an aggregation context
+ * to complete after it was initiated.
+ */
+ uint32_t min_agg_len;
+ /*
+ * This is the minimum amount of payload length required to start an
+ * aggregation context.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_rss_cfg */
+/* Description: This function is used to enable RSS configuration. */
+/* Input (48 bytes) */
+
+struct hwrm_vnic_rss_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed over source and
+ * destination IPv4 addresses of IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination ports of
+ * TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination ports of
+ * UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over source and
+ * destination IPv4 addresses of IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination ports of
+ * TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination ports of
+ * UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint32_t unused_0;
+ uint64_t ring_grp_tbl_addr;
+ /* This is the address for rss ring group table */
+ uint64_t hash_key_tbl_addr;
+ /* This is the address for rss hash key table */
+ uint16_t rss_ctx_idx;
+ /* Index to the rss indirection table. */
+ uint16_t unused_1[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_rss_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_rss_qcfg */
+/* Description: This function is used to query RSS context configuration. */
+/* Input (24 bytes) */
+
+struct hwrm_vnic_rss_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t rss_ctx_idx;
+ /* Index to the rss indirection table. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (64 bytes) */
+
+struct hwrm_vnic_rss_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed over source and
+ * destination IPv4 addresses of IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination ports of
+ * TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination ports of
+ * UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over source and
+ * destination IPv4 addresses of IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination ports of
+ * TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination ports of
+ * UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint32_t unused_0;
+ uint32_t hash_key[10];
+ /* This is the value of rss hash key */
+ uint32_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_plcmodes_cfg */
+/*
+ * Description: This function can be used to set placement mode configuration of
+ * the VNIC.
+ */
+/* Input (40 bytes) */
+
+struct hwrm_vnic_plcmodes_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to use regular
+ * placement algorithm. By default, the regular placement algorithm
+ * shall be enabled on the VNIC.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured use the jumbo
+ * placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured to enable Header-
+ * Data split for IPv4 packets according to the following rules: # If
+ * the packet is identified as TCP/IPv4, then the packet is split at the
+ * beginning of the TCP payload. # If the packet is identified as
+ * UDP/IPv4, then the packet is split at the beginning of UDP payload. #
+ * If the packet is identified as non-TCP and non-UDP IPv4 packet, then
+ * the packet is split at the beginning of the upper layer protocol
+ * header carried in the IPv4 packet.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured to enable Header-
+ * Data split for IPv6 packets according to the following rules: # If
+ * the packet is identified as TCP/IPv6, then the packet is split at the
+ * beginning of the TCP payload. # If the packet is identified as
+ * UDP/IPv6, then the packet is split at the beginning of UDP payload. #
+ * If the packet is identified as non-TCP and non-UDP IPv6 packet, then
+ * the packet is split at the beginning of the upper layer protocol
+ * header carried in the IPv6 packet.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured to enable Header-
+ * Data split for FCoE packets at the beginning of FC payload.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured to enable Header-
+ * Data split for RoCE packets at the beginning of RoCE payload (after
+ * BTH/GRH headers).
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE UINT32_C(0x20)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the jumbo_thresh_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID UINT32_C(0x1)
+ /* This bit must be '1' for the hds_offset_valid field to be configured. */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the hds_threshold_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID UINT32_C(0x4)
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t jumbo_thresh;
+ /*
+ * When jumbo placement algorithm is enabled, this value is used to
+ * determine the threshold for jumbo placement. Packets with length
+ * larger than this value will be placed according to the jumbo
+ * placement algorithm.
+ */
+ uint16_t hds_offset;
+ /*
+ * This value is used to determine the offset into packet buffer where
+ * the split data (payload) will be placed according to one of of HDS
+ * placement algorithm. The lengths of packet buffers provided for split
+ * data shall be larger than this value.
+ */
+ uint16_t hds_threshold;
+ /*
+ * When one of the HDS placement algorithm is enabled, this value is
+ * used to determine the threshold for HDS placement. Packets with
+ * length larger than this value will be placed according to the HDS
+ * placement algorithm. This value shall be in multiple of 4 bytes.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_plcmodes_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_plcmodes_qcfg */
+/*
+ * Description: This function can be used to query placement mode configuration
+ * of the VNIC.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_vnic_plcmodes_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_vnic_plcmodes_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is configured to use regular placement
+ * algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to use the jumbo
+ * placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured to enable Header-Data
+ * split for IPv4 packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured to enable Header-Data
+ * split for IPv6 packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC is configured to enable Header-Data
+ * split for FCoE packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC is configured to enable Header-Data
+ * split for RoCE packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is configured to be the default VNIC
+ * of the requesting function.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC UINT32_C(0x40)
+ uint16_t jumbo_thresh;
+ /*
+ * When jumbo placement algorithm is enabled, this value is used to
+ * determine the threshold for jumbo placement. Packets with length
+ * larger than this value will be placed according to the jumbo
+ * placement algorithm.
+ */
+ uint16_t hds_offset;
+ /*
+ * This value is used to determine the offset into packet buffer where
+ * the split data (payload) will be placed according to one of of HDS
+ * placement algorithm. The lengths of packet buffers provided for split
+ * data shall be larger than this value.
+ */
+ uint16_t hds_threshold;
+ /*
+ * When one of the HDS placement algorithm is enabled, this value is
+ * used to determine the threshold for HDS placement. Packets with
+ * length larger than this value will be placed according to the HDS
+ * placement algorithm. This value shall be in multiple of 4 bytes.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc */
+/* Description: This function is used to allocate COS/Load Balance context. */
+/* Input (16 bytes) */
+
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t rss_cos_lb_ctx_id;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_rss_cos_lb_ctx_free */
+/* Description: This function can be used to free COS/Load Balance context. */
+/* Input (24 bytes) */
+
+struct hwrm_vnic_rss_cos_lb_ctx_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t rss_cos_lb_ctx_id;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_rss_cos_lb_ctx_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_ring_alloc */
+/*
+ * Description: This command allocates and does basic preparation for a ring.
+ */
+/* Input (80 bytes) */
+
+struct hwrm_ring_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the Reserved1 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
+ /* This bit must be '1' for the Reserved2 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED2 UINT32_C(0x2)
+ /* This bit must be '1' for the Reserved3 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the stat_ctx_id_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
+ /* This bit must be '1' for the Reserved4 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
+ /* This bit must be '1' for the max_bw_valid field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
+ uint8_t ring_type;
+ /* Ring Type. */
+ /* Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint64_t page_tbl_addr;
+ /* This value is a pointer to the page table for the Ring. */
+ uint32_t fbo;
+ /* First Byte Offset of the first entry in the first page. */
+ uint8_t page_size;
+ /*
+ * Actual page size in 2^page_size. The supported range is increments in
+ * powers of 2 from 16 bytes to 1GB. - 4 = 16 B Page size is 16 B. - 12
+ * = 4 KB Page size is 4 KB. - 13 = 8 KB Page size is 8 KB. - 16 = 64 KB
+ * Page size is 64 KB. - 21 = 2 MB Page size is 2 MB. - 22 = 4 MB Page
+ * size is 4 MB. - 30 = 1 GB Page size is 1 GB.
+ */
+ uint8_t page_tbl_depth;
+ /*
+ * This value indicates the depth of page table. For this version of the
+ * specification, value other than 0 or 1 shall be considered as an
+ * invalid value. When the page_tbl_depth = 0, then it is treated as a
+ * special case with the following. 1. FBO and page size fields are not
+ * valid. 2. page_tbl_addr is the physical address of the first element
+ * of the ring.
+ */
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint32_t length;
+ /*
+ * Number of 16B units in the ring. Minimum size for a ring is 16 16B
+ * entries.
+ */
+ uint16_t logical_id;
+ /*
+ * Logical ring number for the ring to be allocated. This value
+ * determines the position in the doorbell area where the update to the
+ * ring will be made. For completion rings, this value is also the MSI-X
+ * vector number for the function the completion ring is associated
+ * with.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * This field is used only when ring_type is a TX ring. This value
+ * indicates what completion ring the TX ring is associated with.
+ */
+ uint16_t queue_id;
+ /*
+ * This field is used only when ring_type is a TX ring. This value
+ * indicates what CoS queue the TX ring is associated with.
+ */
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint32_t reserved1;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint16_t reserved2;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint32_t reserved3;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t stat_ctx_id;
+ /*
+ * This field is used only when ring_type is a TX ring. This input
+ * indicates what statistics context this ring should be associated
+ * with.
+ */
+ uint32_t reserved4;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t max_bw;
+ /*
+ * This field is used only when ring_type is a TX ring. Maximum BW
+ * allocated to this TX ring in Mbps. The HWRM will translate this value
+ * into byte counter and time interval used for this ring inside the
+ * device.
+ */
+ uint8_t int_mode;
+ /*
+ * This field is used only when ring_type is a Completion ring. This
+ * value indicates what interrupt mode should be used on this completion
+ * ring. Note: In the legacy interrupt mode, no more than 16 completion
+ * rings are allowed.
+ */
+ /* Legacy INTA */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
+ /* Reserved */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1)
+ /* MSI-X */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2)
+ /* No Interrupt - Polled mode */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
+ uint8_t unused_8[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_ring_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t ring_id;
+ /* Physical number of ring allocated. */
+ uint16_t logical_ring_id;
+ /* Logical number of ring allocated. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_ring_free */
+/*
+ * Description: This command is used to free a ring and associated resources.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_ring_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint8_t ring_type;
+ /* Ring Type. */
+ /* Completion Ring (CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ uint8_t unused_0;
+ uint16_t ring_id;
+ /* Physical number of ring allocated. */
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_ring_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_ring_cmpl_ring_qaggint_params */
+/*
+ * Description: This command is used to query aggregation and interrupt related
+ * parameters specified on a given completion ring.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_ring_cmpl_ring_qaggint_params_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t ring_id;
+ /* Physical number of completion ring. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+
+struct hwrm_ring_cmpl_ring_qaggint_params_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t flags;
+ /*
+ * When this bit is set to '1', interrupt max timer is reset whenever a
+ * completion is received.
+ */
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', ring idle mode aggregation will be
+ * enabled.
+ */
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE UINT32_C(0x2)
+ uint16_t num_cmpl_dma_aggr;
+ /* Number of completions to aggregate before DMA during the normal mode. */
+ uint16_t num_cmpl_dma_aggr_during_int;
+ /*
+ * Number of completions to aggregate before DMA during the interrupt
+ * mode.
+ */
+ uint16_t cmpl_aggr_dma_tmr;
+ /*
+ * Timer in unit of 80-nsec used to aggregate completions before DMA
+ * during the normal mode (not in interrupt mode).
+ */
+ uint16_t cmpl_aggr_dma_tmr_during_int;
+ /*
+ * Timer in unit of 80-nsec used to aggregate completions before DMA
+ * during the interrupt mode.
+ */
+ uint16_t int_lat_tmr_min;
+ /* Minimum time (in unit of 80-nsec) between two interrupts. */
+ uint16_t int_lat_tmr_max;
+ /*
+ * Maximum wait time (in unit of 80-nsec) spent aggregating completions
+ * before signaling the interrupt after the interrupt is enabled.
+ */
+ uint16_t num_cmpl_aggr_int;
+ /*
+ * Minimum number of completions aggregated before signaling an
+ * interrupt.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_ring_cmpl_ring_cfg_aggint_params */
+/*
+ * Description: This command is used to configure aggregation and interrupt
+ * related parameters specified on a given completion ring.
+ */
+/* Input (40 bytes) */
+
+struct hwrm_ring_cmpl_ring_cfg_aggint_params_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t ring_id;
+ /* Physical number of completion ring. */
+ uint16_t flags;
+ /*
+ * When this bit is set to '1', interrupt latency max timer is reset
+ * whenever a completion is received.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', ring idle mode aggregation will be
+ * enabled.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE UINT32_C(0x2)
+ uint16_t num_cmpl_dma_aggr;
+ /* Number of completions to aggregate before DMA during the normal mode. */
+ uint16_t num_cmpl_dma_aggr_during_int;
+ /*
+ * Number of completions to aggregate before DMA during the interrupt
+ * mode.
+ */
+ uint16_t cmpl_aggr_dma_tmr;
+ /*
+ * Timer in unit of 80-nsec used to aggregate completions before DMA
+ * during the normal mode (not in interrupt mode).
+ */
+ uint16_t cmpl_aggr_dma_tmr_during_int;
+ /*
+ * Timer in unit of 80-nsec used to aggregate completions before DMA
+ * during the interrupt mode.
+ */
+ uint16_t int_lat_tmr_min;
+ /* Minimum time (in unit of 80-nsec) between two interrupts. */
+ uint16_t int_lat_tmr_max;
+ /*
+ * Maximum wait time (in unit of 80-nsec) spent aggregating cmpls before
+ * signaling the interrupt after the interrupt is enabled.
+ */
+ uint16_t num_cmpl_aggr_int;
+ /*
+ * Minimum number of completions aggregated before signaling an
+ * interrupt.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_ring_cmpl_ring_cfg_aggint_params_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_ring_reset */
+/*
+ * Description: This command is used to reset a given ring. When an RX ring is
+ * being reset, the HWRM shall perform TPA flush on all VNICs associated with
+ * the RX ring that is being reset.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_ring_reset_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint8_t ring_type;
+ /* Ring Type. */
+ /* Completion Ring (CR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ uint8_t unused_0;
+ uint16_t ring_id;
+ /* Physical number of the ring. */
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_ring_reset_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_ring_grp_alloc */
+/*
+ * Description: This API allocates and does basic preparation for a ring group.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_ring_grp_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t cr;
+ /* This value identifies the CR associated with the ring group. */
+ uint16_t rr;
+ /* This value identifies the main RR associated with the ring group. */
+ uint16_t ar;
+ /*
+ * This value identifies the aggregation RR associated with the ring
+ * group. If this value is 0xFF... (All Fs), then no Aggregation ring
+ * will be set.
+ */
+ uint16_t sc;
+ /*
+ * This value identifies the statistics context associated with the ring
+ * group.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_ring_grp_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t ring_group_id;
+ /*
+ * This is the ring group ID value. Use this value to program the
+ * default ring group for the VNIC or as table entries in an RSS/COS
+ * context.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_ring_grp_free */
+/*
+ * Description: This API frees a ring group and associated resources. # If a
+ * ring in the ring group is reset or free, then the associated rings in the
+ * ring group shall also be reset/free using hwrm_ring_free. # A function driver
+ * shall always use hwrm_ring_grp_free after freeing all rings in a group. # As
+ * a part of executing this command, the HWRM shall reset all associated ring
+ * group resources.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_ring_grp_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t ring_group_id;
+ /* This is the ring group ID value. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_ring_grp_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_l2_filter_alloc */
+/*
+ * Description: An L2 filter is a filter resource that is used to identify a
+ * vnic or ring for a packet based on layer 2 fields. Layer 2 fields for
+ * encapsulated packets include both outer L2 header and/or inner l2 header of
+ * encapsulated packet. The L2 filter resource covers the following OS specific
+ * L2 filters. Linux/FreeBSD (per function): # Broadcast enable/disable # List
+ * of individual multicast filters # All multicast enable/disable filter #
+ * Unicast filters # Promiscuous mode VMware: # Broadcast enable/disable (per
+ * physical function) # All multicast enable/disable (per function) # Unicast
+ * filters per ring or vnic # Promiscuous mode per PF Windows: # Broadcast
+ * enable/disable (per physical function) # List of individual multicast filters
+ * (Driver needs to advertise the maximum number of filters supported) # All
+ * multicast enable/disable per physical function # Unicast filters per vnic #
+ * Promiscuous mode per PF Implementation notes on the use of VNIC in this
+ * command: # By default, these filters belong to default vnic for the function.
+ * # Once these filters are set up, only destination VNIC can be modified. # If
+ * the destination VNIC is not specified in this command, then the HWRM shall
+ * only create an l2 context id. HWRM Implementation notes for multicast
+ * filters: # The hwrm_filter_alloc command can be used to set up multicast
+ * filters (perfect match or partial match). Each individual function driver can
+ * set up multicast filters independently. # The HWRM needs to keep track of
+ * multicast filters set up by function drivers and maintain multicast group
+ * replication records to enable a subset of functions to receive traffic for a
+ * specific multicast address. # When a specific multicast filter cannot be set,
+ * the HWRM shall return an error. In this error case, the driver should fall
+ * back to using one general filter (rather than specific) for all multicast
+ * traffic. # When the SR-IOV is enabled, the HWRM needs to additionally track
+ * source knockout per multicast group record. Examples of setting unicast
+ * filters: For a unicast MAC based filter, one can use a combination of the
+ * fields and masks provided in this command to set up the filter. Below are
+ * some examples: # MAC + no VLAN filter: This filter is used to identify
+ * traffic that does not contain any VLAN tags and matches destination (or
+ * source) MAC address. This filter can be set up by setting only l2_addr field
+ * to be a valid field. All other fields are not valid. The following value is
+ * set for l2_addr. l2_addr = MAC # MAC + Any VLAN filter: This filter is used
+ * to identify traffic that carries single VLAN tag and matches (destination or
+ * source) MAC address. This filter can be set up by setting only l2_addr and
+ * l2_ovlan_mask fields to be valid fields. All other fields are not valid. The
+ * following values are set for those two valid fields. l2_addr = MAC,
+ * l2_ovlan_mask = 0xFFFF # MAC + no VLAN or VLAN ID=0: This filter is used to
+ * identify untagged traffic that does not contain any VLAN tags or a VLAN tag
+ * with VLAN ID = 0 and matches destination (or source) MAC address. This filter
+ * can be set up by setting only l2_addr and l2_ovlan fields to be valid fields.
+ * All other fields are not valid. The following value are set for l2_addr and
+ * l2_ovlan. l2_addr = MAC, l2_ovlan = 0x0 # MAC + no VLAN or any VLAN: This
+ * filter is used to identify traffic that contains zero or 1 VLAN tag and
+ * matches destination (or source) MAC address. This filter can be set up by
+ * setting only l2_addr, l2_ovlan, and l2_mask fields to be valid fields. All
+ * other fields are not valid. The following value are set for l2_addr,
+ * l2_ovlan, and l2_mask fields. l2_addr = MAC, l2_ovlan = 0x0, l2_ovlan_mask =
+ * 0xFFFF # MAC + VLAN ID filter: This filter can be set up by setting only
+ * l2_addr, l2_ovlan, and l2_ovlan_mask fields to be valid fields. All other
+ * fields are not valid. The following values are set for those three valid
+ * fields. l2_addr = MAC, l2_ovlan = VLAN ID, l2_ovlan_mask = 0xF000
+ */
+/* Input (96 bytes) */
+
+struct hwrm_cfa_l2_filter_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x4)
+ /*
+ * If this flag is set, all t_l2_* fields are invalid and they should
+ * not be specified. If this flag is set, then l2_* fields refer to
+ * fields of outermost L2 header.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
+ uint32_t enables;
+ /* This bit must be '1' for the l2_addr field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
+ /* This bit must be '1' for the l2_addr_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK UINT32_C(0x2)
+ /* This bit must be '1' for the l2_ovlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4)
+ /* This bit must be '1' for the l2_ovlan_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK UINT32_C(0x8)
+ /* This bit must be '1' for the l2_ivlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10)
+ /* This bit must be '1' for the l2_ivlan_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK UINT32_C(0x20)
+ /* This bit must be '1' for the t_l2_addr field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40)
+ /* This bit must be '1' for the t_l2_addr_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK UINT32_C(0x80)
+ /* This bit must be '1' for the t_l2_ovlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN UINT32_C(0x100)
+ /* This bit must be '1' for the t_l2_ovlan_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK UINT32_C(0x200)
+ /* This bit must be '1' for the t_l2_ivlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN UINT32_C(0x400)
+ /* This bit must be '1' for the t_l2_ivlan_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK UINT32_C(0x800)
+ /* This bit must be '1' for the src_type field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE UINT32_C(0x1000)
+ /* This bit must be '1' for the src_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
+ /* This bit must be '1' for the tunnel_type field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x4000)
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
+ /* This bit must be '1' for the mirror_vnic_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID UINT32_C(0x10000)
+ uint8_t l2_addr[6];
+ /*
+ * This value sets the match value for the L2 MAC address. Destination
+ * MAC address for RX path. Source MAC address for TX path.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t l2_addr_mask[6];
+ /*
+ * This value sets the mask value for the L2 address. A value of 0 will
+ * mask the corresponding bit from compare.
+ */
+ uint16_t l2_ovlan;
+ /* This value sets VLAN ID value for outer VLAN. */
+ uint16_t l2_ovlan_mask;
+ /*
+ * This value sets the mask value for the ovlan id. A value of 0 will
+ * mask the corresponding bit from compare.
+ */
+ uint16_t l2_ivlan;
+ /* This value sets VLAN ID value for inner VLAN. */
+ uint16_t l2_ivlan_mask;
+ /*
+ * This value sets the mask value for the ivlan id. A value of 0 will
+ * mask the corresponding bit from compare.
+ */
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t t_l2_addr[6];
+ /*
+ * This value sets the match value for the tunnel L2 MAC address.
+ * Destination MAC address for RX path. Source MAC address for TX path.
+ */
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t t_l2_addr_mask[6];
+ /*
+ * This value sets the mask value for the tunnel L2 address. A value of
+ * 0 will mask the corresponding bit from compare.
+ */
+ uint16_t t_l2_ovlan;
+ /* This value sets VLAN ID value for tunnel outer VLAN. */
+ uint16_t t_l2_ovlan_mask;
+ /*
+ * This value sets the mask value for the tunnel ovlan id. A value of 0
+ * will mask the corresponding bit from compare.
+ */
+ uint16_t t_l2_ivlan;
+ /* This value sets VLAN ID value for tunnel inner VLAN. */
+ uint16_t t_l2_ivlan_mask;
+ /*
+ * This value sets the mask value for the tunnel ivlan id. A value of 0
+ * will mask the corresponding bit from compare.
+ */
+ uint8_t src_type;
+ /* This value identifies the type of source of the packet. */
+ /* Network port */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
+ /* Physical function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
+ /* Virtual function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
+ /* Virtual NIC of a function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
+ /* Embedded processor for CFA management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
+ /* Embedded processor for OOB management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
+ /* Embedded processor for RoCE */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
+ /* Embedded processor for network proxy functions */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
+ uint8_t unused_6;
+ uint32_t src_id;
+ /*
+ * This value is the id of the source. For a network port, it represents
+ * port_id. For a physical function, it represents fid. For a virtual
+ * function, it represents vf_id. For a vnic, it represents vnic_id. For
+ * embedded processors, this id is not valid. Notes: 1. The function ID
+ * is implied if it src_id is not provided for a src_type that is either
+ */
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Non-tunnel */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
+ uint8_t unused_7;
+ uint16_t dst_id;
+ /*
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
+ */
+ uint16_t mirror_vnic_id;
+ /* Logical VNIC ID of the VNIC where traffic is mirrored. */
+ uint8_t pri_hint;
+ /*
+ * This hint is provided to help in placing the filter in the filter
+ * table.
+ */
+ /* No preference */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER UINT32_C(0x0)
+ /* Above the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER UINT32_C(0x1)
+ /* Below the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER UINT32_C(0x2)
+ /* As high as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN UINT32_C(0x4)
+ uint8_t unused_8;
+ uint32_t unused_9;
+ uint64_t l2_filter_id_hint;
+ /*
+ * This is the ID of the filter that goes along with the pri_hint. This
+ * field is valid only for the following values. 1 - Above the given
+ * filter 2 - Below the given filter
+ */
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_cfa_l2_filter_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint32_t flow_id;
+ /*
+ * This is the ID of the flow associated with this filter. This value
+ * shall be used to match and associate the flow identifier returned in
+ * completion records. A value of 0xFFFFFFFF shall indicate no flow id.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_l2_filter_free */
+/*
+ * Description: Free a L2 filter. The HWRM shall free all associated filter
+ * resources with the L2 filter.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_cfa_l2_filter_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_l2_filter_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_l2_filter_cfg */
+/* Description: Change the configuration of an existing L2 filter */
+/* Input (40 bytes) */
+
+struct hwrm_cfa_l2_filter_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP UINT32_C(0x2)
+ uint32_t enables;
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID UINT32_C(0x2)
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint32_t dst_id;
+ /*
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
+ */
+ uint32_t new_mirror_vnic_id;
+ /* New Logical VNIC ID of the VNIC where traffic is mirrored. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_l2_filter_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_l2_set_rx_mask */
+/* Description: This command will set rx mask of the function. */
+/* Input (56 bytes) */
+
+struct hwrm_cfa_l2_set_rx_mask_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t vnic_id;
+ /* VNIC ID */
+ uint32_t mask;
+ /* Reserved for future use. */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1)
+ /*
+ * When this bit is '1', the function is requested to accept multi-cast
+ * packets specified by the multicast addr table.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2)
+ /*
+ * When this bit is '1', the function is requested to accept all multi-
+ * cast packets.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4)
+ /*
+ * When this bit is '1', the function is requested to accept broadcast
+ * packets.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8)
+ /*
+ * When this bit is '1', the function is requested to be put in the
+ * promiscuous mode. The HWRM should accept any function to set up
+ * promiscuous mode. The HWRM shall follow the semantics below for the
+ * promiscuous mode support. # When partitioning is not enabled on a
+ * port (i.e. single PF on the port), then the PF shall be allowed to be
+ * in the promiscuous mode. When the PF is in the promiscuous mode, then
+ * it shall receive all host bound traffic on that port. # When
+ * partitioning is enabled on a port (i.e. multiple PFs per port) and a
+ * PF on that port is in the promiscuous mode, then the PF receives all
+ * traffic within that partition as identified by a unique identifier
+ * for the PF (e.g. S-Tag). If a unique outer VLAN for the PF is
+ * specified, then the setting of promiscuous mode on that PF shall
+ * result in the PF receiving all host bound traffic with matching outer
+ * VLAN. # A VF shall can be set in the promiscuous mode. In the
+ * promiscuous mode, the VF does not receive any traffic unless a unique
+ * outer VLAN for the VF is specified. If a unique outer VLAN for the VF
+ * is specified, then the setting of promiscuous mode on that VF shall
+ * result in the VF receiving all host bound traffic with the matching
+ * outer VLAN. # The HWRM shall allow the setting of promiscuous mode on
+ * a function independently from the promiscuous mode settings on other
+ * functions.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
+ /*
+ * If this flag is set, the corresponding RX filters shall be set up to
+ * cover multicast/broadcast filters for the outermost Layer 2
+ * destination MAC address field.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20)
+ /*
+ * If this flag is set, the corresponding RX filters shall be set up to
+ * cover multicast/broadcast filters for the VLAN-tagged packets that
+ * match the TPID and VID fields of VLAN tags in the VLAN tag table
+ * specified in this command.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY UINT32_C(0x40)
+ /*
+ * If this flag is set, the corresponding RX filters shall be set up to
+ * cover multicast/broadcast filters for non-VLAN tagged packets and
+ * VLAN-tagged packets that match the TPID and VID fields of VLAN tags
+ * in the VLAN tag table specified in this command.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN UINT32_C(0x80)
+ /*
+ * If this flag is set, the corresponding RX filters shall be set up to
+ * cover multicast/broadcast filters for non-VLAN tagged packets and
+ * VLAN-tagged packets matching any VLAN tag. If this flag is set, then
+ * the HWRM shall ignore VLAN tags specified in vlan_tag_tbl. If none of
+ * vlanonly, vlan_nonvlan, and anyvlan_nonvlan flags is set, then the
+ * HWRM shall ignore VLAN tags specified in vlan_tag_tbl. The HWRM
+ * client shall set at most one flag out of vlanonly, vlan_nonvlan, and
+ * anyvlan_nonvlan.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN UINT32_C(0x100)
+ uint64_t mc_tbl_addr;
+ /* This is the address for mcast address tbl. */
+ uint32_t num_mc_entries;
+ /*
+ * This value indicates how many entries in mc_tbl are valid. Each entry
+ * is 6 bytes.
+ */
+ uint32_t unused_0;
+ uint64_t vlan_tag_tbl_addr;
+ /*
+ * This is the address for VLAN tag table. Each VLAN entry in the table
+ * is 4 bytes of a VLAN tag including TPID, PCP, DEI, and VID fields in
+ * network byte order.
+ */
+ uint32_t num_vlan_tags;
+ /*
+ * This value indicates how many entries in vlan_tag_tbl are valid. Each
+ * entry is 4 bytes.
+ */
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_l2_set_rx_mask_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_tunnel_filter_alloc */
+/*
+ * Description: This is a tunnel filter that uses fields from tunnel header in
+ * addition to l2 context. The tunnel filter applies to receive side only. The
+ * l2_* fields in this command represent fields of inner L2 header. They are
+ * optional to be specified. It allows l2_filter_id to be created with outer L2
+ * header fields that can be shared with multiple tunnel filters specified as
+ * combinations of inner L2 header fields, tunnel type, and VNI.
+ */
+/* Input (88 bytes) */
+
+struct hwrm_cfa_tunnel_filter_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x1)
+ uint32_t enables;
+ /* This bit must be '1' for the l2_filter_id field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID UINT32_C(0x1)
+ /* This bit must be '1' for the l2_addr field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x2)
+ /* This bit must be '1' for the l2_ivlan field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x4)
+ /* This bit must be '1' for the l3_addr field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR UINT32_C(0x8)
+ /* This bit must be '1' for the l3_addr_type field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE UINT32_C(0x10)
+ /* This bit must be '1' for the t_l3_addr_type field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE UINT32_C(0x20)
+ /* This bit must be '1' for the t_l3_addr field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR UINT32_C(0x40)
+ /* This bit must be '1' for the tunnel_type field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x80)
+ /* This bit must be '1' for the vni field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI UINT32_C(0x100)
+ /* This bit must be '1' for the dst_vnic_id field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID UINT32_C(0x200)
+ /* This bit must be '1' for the mirror_vnic_id field to be configured. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID UINT32_C(0x400)
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint8_t l2_addr[6];
+ /*
+ * This value sets the match value for the inner L2 MAC address.
+ * Destination MAC address for RX path. Source MAC address for TX path.
+ */
+ uint16_t l2_ivlan;
+ /*
+ * This value sets VLAN ID value for inner VLAN. Only 12-bits of VLAN ID
+ * are used in setting the filter.
+ */
+ uint32_t l3_addr[4];
+ /*
+ * The value of inner destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t t_l3_addr[4];
+ /*
+ * The value of tunnel destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint8_t l3_addr_type;
+ /*
+ * This value indicates the type of inner IP address. 4 - IPv4 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t t_l3_addr_type;
+ /*
+ * This value indicates the type of tunnel IP address. 4 - IPv4 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Non-tunnel */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
+ uint8_t unused_0;
+ uint32_t vni;
+ /*
+ * Virtual Network Identifier (VNI). Only valid with tunnel_types VXLAN,
+ * NVGRE, and Geneve. Only lower 24-bits of VNI field are used in
+ * setting up the filter.
+ */
+ uint32_t dst_vnic_id;
+ /* Logical VNIC ID of the destination VNIC. */
+ uint32_t mirror_vnic_id;
+ /* Logical VNIC ID of the VNIC where traffic is mirrored. */
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_cfa_tunnel_filter_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t tunnel_filter_id;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t flow_id;
+ /*
+ * This is the ID of the flow associated with this filter. This value
+ * shall be used to match and associate the flow identifier returned in
+ * completion records. A value of 0xFFFFFFFF shall indicate no flow id.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_tunnel_filter_free */
+/* Description: Free a tunnel filter */
+/* Input (24 bytes) */
+
+struct hwrm_cfa_tunnel_filter_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t tunnel_filter_id;
+ /* This value is an opaque id into CFA data structures. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_tunnel_filter_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_encap_record_alloc */
+/*
+ * Description: This command is used to create an encapsulation record. The
+ * source MAC address and source IP address specified for the source property
+ * checks shall be used in the encapsulation where applicable.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_cfa_encap_record_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
+ */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x1)
+ uint8_t encap_type;
+ /* Encapsulation Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS UINT32_C(0x6)
+ /* VLAN */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE UINT32_C(0x8)
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint32_t encap_data[16];
+ /* This value is encap data used for the given encap type. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_encap_record_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t encap_record_id;
+ /* This value is an opaque id into CFA data structures. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_encap_record_free */
+/* Description: Free an encap record */
+/* Input (24 bytes) */
+
+struct hwrm_cfa_encap_record_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t encap_record_id;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_encap_record_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_ntuple_filter_alloc */
+/*
+ * Description: This is a ntuple filter that uses fields from L4/L3 header and
+ * optionally fields from L2. The ntuple filters apply to receive traffic only.
+ * All L2/L3/L4 header fields are specified in network byte order. These filters
+ * can be used for Receive Flow Steering (RFS). # For ethertype value, only
+ * 0x0800 (IPv4) and 0x86dd (IPv6) shall be supported for ntuple filters. # If a
+ * field specified in this command is not enabled as a valid field, then that
+ * field shall not be used in matching packet header fields against this filter.
+ */
+/* Input (128 bytes) */
+
+struct hwrm_cfa_ntuple_filter_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x1)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x2)
+ uint32_t enables;
+ /* This bit must be '1' for the l2_filter_id field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID UINT32_C(0x1)
+ /* This bit must be '1' for the ethertype field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE UINT32_C(0x2)
+ /* This bit must be '1' for the tunnel_type field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x4)
+ /* This bit must be '1' for the src_macaddr field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR UINT32_C(0x8)
+ /* This bit must be '1' for the ipaddr_type field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE UINT32_C(0x10)
+ /* This bit must be '1' for the src_ipaddr field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR UINT32_C(0x20)
+ /* This bit must be '1' for the src_ipaddr_mask field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK UINT32_C(0x40)
+ /* This bit must be '1' for the dst_ipaddr field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR UINT32_C(0x80)
+ /* This bit must be '1' for the dst_ipaddr_mask field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK UINT32_C(0x100)
+ /* This bit must be '1' for the ip_protocol field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL UINT32_C(0x200)
+ /* This bit must be '1' for the src_port field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT UINT32_C(0x400)
+ /* This bit must be '1' for the src_port_mask field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK UINT32_C(0x800)
+ /* This bit must be '1' for the dst_port field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT UINT32_C(0x1000)
+ /* This bit must be '1' for the dst_port_mask field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK UINT32_C(0x2000)
+ /* This bit must be '1' for the pri_hint field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT UINT32_C(0x4000)
+ /* This bit must be '1' for the ntuple_filter_id field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID UINT32_C(0x8000)
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x10000)
+ /* This bit must be '1' for the mirror_vnic_id field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID UINT32_C(0x20000)
+ /* This bit must be '1' for the dst_macaddr field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR UINT32_C(0x40000)
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint8_t src_macaddr[6];
+ /* This value indicates the source MAC address in the Ethernet header. */
+ uint16_t ethertype; /* big endian */
+ /* This value indicates the ethertype in the Ethernet header. */
+ uint8_t ip_addr_type;
+ /*
+ * This value indicates the type of IP address. 4 - IPv4 6 - IPv6 All
+ * others are invalid.
+ */
+ /* invalid */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
+ /* IPv4 */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4)
+ /* IPv6 */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6)
+ uint8_t ip_protocol;
+ /*
+ * The value of protocol filed in IP header. Applies to UDP and TCP
+ * traffic. 6 - UDP 17 - TCP
+ */
+ /* invalid */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
+ /* UDP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x6)
+ /* TCP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x11)
+ uint16_t dst_id;
+ /*
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
+ */
+ uint16_t mirror_vnic_id;
+ /* Logical VNIC ID of the VNIC where traffic is mirrored. */
+ uint8_t tunnel_type;
+ /*
+ * This value indicates the tunnel type for this filter. If this field
+ * is not specified, then the filter shall apply to both non-tunneled
+ * and tunneled packets. If this field conflicts with the tunnel_type
+ * specified in the l2_filter_id, then the HWRM shall return an error
+ * for this command.
+ */
+ /* Non-tunnel */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
+ uint8_t pri_hint;
+ /*
+ * This hint is provided to help in placing the filter in the filter
+ * table.
+ */
+ /* No preference */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER UINT32_C(0x0)
+ /* Above the given filter */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE UINT32_C(0x1)
+ /* Below the given filter */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW UINT32_C(0x2)
+ /* As high as possible */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST UINT32_C(0x4)
+ uint32_t src_ipaddr[4]; /* big endian */
+ /*
+ * The value of source IP address to be used in filtering. For IPv4,
+ * first four bytes represent the IP address.
+ */
+ uint32_t src_ipaddr_mask[4]; /* big endian */
+ /*
+ * The value of source IP address mask to be used in filtering. For
+ * IPv4, first four bytes represent the IP address mask.
+ */
+ uint32_t dst_ipaddr[4]; /* big endian */
+ /*
+ * The value of destination IP address to be used in filtering. For
+ * IPv4, first four bytes represent the IP address.
+ */
+ uint32_t dst_ipaddr_mask[4]; /* big endian */
+ /*
+ * The value of destination IP address mask to be used in filtering. For
+ * IPv4, first four bytes represent the IP address mask.
+ */
+ uint16_t src_port; /* big endian */
+ /*
+ * The value of source port to be used in filtering. Applies to UDP and
+ * TCP traffic.
+ */
+ uint16_t src_port_mask; /* big endian */
+ /*
+ * The value of source port mask to be used in filtering. Applies to UDP
+ * and TCP traffic.
+ */
+ uint16_t dst_port; /* big endian */
+ /*
+ * The value of destination port to be used in filtering. Applies to UDP
+ * and TCP traffic.
+ */
+ uint16_t dst_port_mask; /* big endian */
+ /*
+ * The value of destination port mask to be used in filtering. Applies
+ * to UDP and TCP traffic.
+ */
+ uint64_t ntuple_filter_id_hint;
+ /* This is the ID of the filter that goes along with the pri_hint. */
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_cfa_ntuple_filter_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t ntuple_filter_id;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t flow_id;
+ /*
+ * This is the ID of the flow associated with this filter. This value
+ * shall be used to match and associate the flow identifier returned in
+ * completion records. A value of 0xFFFFFFFF shall indicate no flow id.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_ntuple_filter_free */
+/* Description: Free an ntuple filter */
+/* Input (24 bytes) */
+
+struct hwrm_cfa_ntuple_filter_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t ntuple_filter_id;
+ /* This value is an opaque id into CFA data structures. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_ntuple_filter_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_ntuple_filter_cfg */
+/* Description: Configure an ntuple filter with new destination VNIC */
+/* Input (40 bytes) */
+
+struct hwrm_cfa_ntuple_filter_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the new_dst_id field to be configured. */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID UINT32_C(0x2)
+ uint32_t unused_0;
+ uint64_t ntuple_filter_id;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t new_dst_id;
+ /*
+ * If set, this value shall represent the new Logical VNIC ID of the
+ * destination VNIC for the RX path and new network port id of the
+ * destination port for the TX path.
+ */
+ uint32_t new_mirror_vnic_id;
+ /* New Logical VNIC ID of the VNIC where traffic is mirrored. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_ntuple_filter_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_em_flow_alloc */
+/*
+ * Description: This is a generic Exact Match (EM) flow that uses fields from
+ * L4/L3/L2 headers. The EM flows apply to transmit and receive traffic. All
+ * L2/L3/L4 header fields are specified in network byte order. For each EM flow,
+ * there is an associated set of actions specified. For tunneled packets, all
+ * L2/L3/L4 fields specified are fields of inner headers unless otherwise
+ * specified. # If a field specified in this command is not enabled as a valid
+ * field, then that field shall not be used in matching packet header fields
+ * against this EM flow entry.
+ */
+/* Input (112 bytes) */
+
+struct hwrm_cfa_em_flow_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates enabling of a byte counter for a given
+ * flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates enabling of a packet counter for a
+ * given flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4)
+ /*
+ * Setting of this flag indicates de-capsulation action for the given
+ * flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8)
+ /*
+ * Setting of this flag indicates encapsulation action for the given
+ * flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20)
+ uint32_t enables;
+ /* This bit must be '1' for the l2_filter_id field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID UINT32_C(0x1)
+ /* This bit must be '1' for the tunnel_type field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x2)
+ /* This bit must be '1' for the tunnel_id field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID UINT32_C(0x4)
+ /* This bit must be '1' for the src_macaddr field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR UINT32_C(0x8)
+ /* This bit must be '1' for the dst_macaddr field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR UINT32_C(0x10)
+ /* This bit must be '1' for the ovlan_vid field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID UINT32_C(0x20)
+ /* This bit must be '1' for the ivlan_vid field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID UINT32_C(0x40)
+ /* This bit must be '1' for the ethertype field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE UINT32_C(0x80)
+ /* This bit must be '1' for the src_ipaddr field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR UINT32_C(0x100)
+ /* This bit must be '1' for the dst_ipaddr field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR UINT32_C(0x200)
+ /* This bit must be '1' for the ipaddr_type field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE UINT32_C(0x400)
+ /* This bit must be '1' for the ip_protocol field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL UINT32_C(0x800)
+ /* This bit must be '1' for the src_port field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT UINT32_C(0x1000)
+ /* This bit must be '1' for the dst_port field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT UINT32_C(0x2000)
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x4000)
+ /* This bit must be '1' for the mirror_vnic_id field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID UINT32_C(0x8000)
+ /* This bit must be '1' for the encap_record_id field to be configured. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID UINT32_C(0x10000)
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Non-tunnel */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint32_t tunnel_id;
+ /*
+ * Tunnel identifier. Virtual Network Identifier (VNI). Only valid with
+ * tunnel_types VXLAN, NVGRE, and Geneve. Only lower 24-bits of VNI
+ * field are used in setting up the filter.
+ */
+ uint8_t src_macaddr[6];
+ /* This value indicates the source MAC address in the Ethernet header. */
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t dst_macaddr[6];
+ /*
+ * This value indicates the destination MAC address in the Ethernet
+ * header.
+ */
+ uint16_t ovlan_vid;
+ /*
+ * This value indicates the VLAN ID of the outer VLAN tag in the
+ * Ethernet header.
+ */
+ uint16_t ivlan_vid;
+ /*
+ * This value indicates the VLAN ID of the inner VLAN tag in the
+ * Ethernet header.
+ */
+ uint16_t ethertype; /* big endian */
+ /* This value indicates the ethertype in the Ethernet header. */
+ uint8_t ip_addr_type;
+ /*
+ * This value indicates the type of IP address. 4 - IPv4 6 - IPv6 All
+ * others are invalid.
+ */
+ /* invalid */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
+ /* IPv4 */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4)
+ /* IPv6 */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6)
+ uint8_t ip_protocol;
+ /*
+ * The value of protocol filed in IP header. Applies to UDP and TCP
+ * traffic. 6 - UDP 17 - TCP
+ */
+ /* invalid */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
+ /* UDP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x6)
+ /* TCP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x11)
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint32_t src_ipaddr[4]; /* big endian */
+ /*
+ * The value of source IP address to be used in filtering. For IPv4,
+ * first four bytes represent the IP address.
+ */
+ uint32_t dst_ipaddr[4]; /* big endian */
+ /*
+ * The value of destination IP address to be used in filtering. For
+ * IPv4, first four bytes represent the IP address.
+ */
+ uint16_t src_port; /* big endian */
+ /*
+ * The value of source port to be used in filtering. Applies to UDP and
+ * TCP traffic.
+ */
+ uint16_t dst_port; /* big endian */
+ /*
+ * The value of destination port to be used in filtering. Applies to UDP
+ * and TCP traffic.
+ */
+ uint16_t dst_id;
+ /*
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
+ */
+ uint16_t mirror_vnic_id;
+ /* Logical VNIC ID of the VNIC where traffic is mirrored. */
+ uint32_t encap_record_id;
+ /* Logical ID of the encapsulation record. */
+ uint32_t unused_6;
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_cfa_em_flow_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t em_filter_id;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t flow_id;
+ /*
+ * This is the ID of the flow associated with this filter. This value
+ * shall be used to match and associate the flow identifier returned in
+ * completion records. A value of 0xFFFFFFFF shall indicate no flow id.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_em_flow_free */
+/* Description: Free an EM flow table entry */
+/* Input (24 bytes) */
+
+struct hwrm_cfa_em_flow_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t em_filter_id;
+ /* This value is an opaque id into CFA data structures. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_em_flow_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_em_flow_cfg */
+/* Description: Configure an EM flow with new destination VNIC */
+/* Input (40 bytes) */
+
+struct hwrm_cfa_em_flow_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the new_dst_id field to be configured. */
+ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_DST_ID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID UINT32_C(0x2)
+ uint32_t unused_0;
+ uint64_t em_filter_id;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t new_dst_id;
+ /*
+ * If set, this value shall represent the new Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
+ */
+ uint32_t new_mirror_vnic_id;
+ /* New Logical VNIC ID of the VNIC where traffic is mirrored. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_cfa_em_flow_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_tunnel_dst_port_query */
+/*
+ * Description: This function is called by a driver to query tunnel type
+ * specific destination port configuration.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_tunnel_dst_port_query_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_tunnel_dst_port_query_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t tunnel_dst_port_id;
+ /*
+ * This field represents the identifier of L4 destination port used for
+ * the given tunnel type. This field is valid for specific tunnel types
+ * that use layer 4 (e.g. UDP) transports for tunneling.
+ */
+ uint16_t tunnel_dst_port_val; /* big endian */
+ /*
+ * This field represents the value of L4 destination port identified by
+ * tunnel_dst_port_id. This field is valid for specific tunnel types
+ * that use layer 4 (e.g. UDP) transports for tunneling. This field is
+ * in network byte order. A value of 0 means that the destination port
+ * is not configured.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_tunnel_dst_port_alloc */
+/*
+ * Description: This function is called by a driver to allocate l4 destination
+ * port for a specific tunnel type. The destination port value is provided in
+ * the input. If the HWRM supports only one global destination port for a tunnel
+ * type, then the HWRM shall keep track of its usage as described below. # The
+ * first caller that allocates a destination port shall always succeed and the
+ * HWRM shall save the destination port configuration for that tunnel type and
+ * increment the usage count to 1. # Subsequent callers allocating the same
+ * destination port for that tunnel type shall succeed and the HWRM shall
+ * increment the usage count for that port for each subsequent caller that
+ * succeeds. # Any subsequent caller trying to allocate a different destination
+ * port for that tunnel type shall fail until the usage count for the original
+ * destination port goes to zero. # A caller that frees a port will cause the
+ * usage count for that port to decrement.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_tunnel_dst_port_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ uint8_t unused_0;
+ uint16_t tunnel_dst_port_val; /* big endian */
+ /*
+ * This field represents the value of L4 destination port used for the
+ * given tunnel type. This field is valid for specific tunnel types that
+ * use layer 4 (e.g. UDP) transports for tunneling. This field is in
+ * network byte order. A value of 0 shall fail the command.
+ */
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_tunnel_dst_port_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t tunnel_dst_port_id;
+ /*
+ * Identifier of a tunnel L4 destination port value. Only applies to
+ * tunnel types that has l4 destination port parameters.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_tunnel_dst_port_free */
+/*
+ * Description: This function is called by a driver to free l4 destination port
+ * for a specific tunnel type.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_tunnel_dst_port_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ uint8_t unused_0;
+ uint16_t tunnel_dst_port_id;
+ /*
+ * Identifier of a tunnel L4 destination port value. Only applies to
+ * tunnel types that has l4 destination port parameters.
+ */
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_tunnel_dst_port_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_alloc */
+/*
+ * Description: This command allocates and does basic preparation for a stat
+ * context.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_stat_ctx_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t stats_dma_addr;
+ /* This is the address for statistic block. */
+ uint32_t update_period_ms;
+ /*
+ * The statistic block update period in ms. e.g. 250ms, 500ms, 750ms,
+ * 1000ms.
+ */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_stat_ctx_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t stat_ctx_id;
+ /* This is the statistics context ID value. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_free */
+/* Description: This command is used to free a stat context. */
+/* Input (24 bytes) */
+
+struct hwrm_stat_ctx_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_stat_ctx_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t stat_ctx_id;
+ /* This is the statistics context ID value. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_query */
+/* Description: This command returns statistics of a context. */
+/* Input (24 bytes) */
+
+struct hwrm_stat_ctx_query_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (176 bytes) */
+
+struct hwrm_stat_ctx_query_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_err_pkts;
+ /* Number of transmitted packets with error */
+ uint64_t tx_drop_pkts;
+ /* Number of dropped packets on transmit path */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t rx_ucast_pkts;
+ /* Number of received unicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_err_pkts;
+ /* Number of received packets with error */
+ uint64_t rx_drop_pkts;
+ /* Number of dropped packets on received path */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast packets */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregated unicast bytes */
+ uint64_t rx_agg_events;
+ /* Number of aggregation events */
+ uint64_t rx_agg_aborts;
+ /* Number of aborted aggregations */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_clr_stats */
+/* Description: This command clears statistics of a context. */
+/* Input (24 bytes) */
+
+struct hwrm_stat_ctx_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_stat_ctx_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_fw_reset */
+/*
+ * Description: This function is called by a driver to self reset the firmware
+ * running on the processor indicated by the embedded_proc_type.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_fw_reset_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint8_t embedded_proc_type;
+ /* Type of embedded processor. */
+ /* Boot Processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_BOOT UINT32_C(0x0)
+ /* Management Processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_MGMT UINT32_C(0x1)
+ /* Network control processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_NETCTRL UINT32_C(0x2)
+ /* RoCE control processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_ROCE UINT32_C(0x3)
+ /* Reserved */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_RSVD UINT32_C(0x4)
+ uint8_t selfrst_status;
+ /* Type of self reset. */
+ /* No Self Reset */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTNONE UINT32_C(0x0)
+ /* Self Reset as soon as possible to do so safely */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTASAP UINT32_C(0x1)
+ /* Self Reset on PCIe Reset */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTPCIERST UINT32_C(0x2)
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_fw_reset_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t selfrst_status;
+ /* Type of self reset. */
+ /* No Self Reset */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTNONE UINT32_C(0x0)
+ /* Self Reset as soon as possible to do so safely */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTASAP UINT32_C(0x1)
+ /* Self Reset on PCIe Reset */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTPCIERST UINT32_C(0x2)
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_fw_qstatus */
+/*
+ * Description: This function is called by a driver to query the status of the
+ * firmware running on the processor indicated by the embedded_proc_type.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_fw_qstatus_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint8_t embedded_proc_type;
+ /* Type of embedded processor. */
+ /* Boot Processor */
+ #define HWRM_FW_QSTATUS_INPUT_EMBEDDED_PROC_TYPE_BOOT UINT32_C(0x0)
+ /* Management Processor */
+ #define HWRM_FW_QSTATUS_INPUT_EMBEDDED_PROC_TYPE_MGMT UINT32_C(0x1)
+ /* Network control processor */
+ #define HWRM_FW_QSTATUS_INPUT_EMBEDDED_PROC_TYPE_NETCTRL UINT32_C(0x2)
+ /* RoCE control processor */
+ #define HWRM_FW_QSTATUS_INPUT_EMBEDDED_PROC_TYPE_ROCE UINT32_C(0x3)
+ /* Reserved */
+ #define HWRM_FW_QSTATUS_INPUT_EMBEDDED_PROC_TYPE_RSVD UINT32_C(0x4)
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_fw_qstatus_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t selfrst_status;
+ /* Type of self reset. */
+ /* No Self Reset */
+ #define HWRM_FW_QSTATUS_OUTPUT_SELFRST_STATUS_SELFRSTNONE UINT32_C(0x0)
+ /* Self Reset as soon as possible to do so safely */
+ #define HWRM_FW_QSTATUS_OUTPUT_SELFRST_STATUS_SELFRSTASAP UINT32_C(0x1)
+ /* Self Reset on PCIe Reset */
+ #define HWRM_FW_QSTATUS_OUTPUT_SELFRST_STATUS_SELFRSTPCIERST UINT32_C(0x2)
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_fw_set_time */
+/*
+ * Description: Inform the HWRM firmware of the current date/time. Ideally, the
+ * date/time will be current time in GMT/UTC and the zone value will be 0
+ * (indicating UTC). If the time zone is not known, the zone value shall be
+ * 0xffff. Other values for zone are discouraged, but if specified, they
+ * indicate the number of minutes east of UTC, while zones west of UTC are
+ * represented with a 2's complement negative value (e.g. PST would be -480
+ * while PDT would be -420).
+ */
+/* Input (32 bytes) */
+
+struct hwrm_fw_set_time_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t year;
+ /* Current year */
+ /* Date/time is not known */
+ #define HWRM_FW_SET_TIME_INPUT_YEAR_UNKNOWN UINT32_C(0x0)
+ uint8_t month;
+ /* Current month of year (1-12) */
+ uint8_t day;
+ /* Current day of month (1-31) */
+ uint8_t hour;
+ /* Current hour (0-23) */
+ uint8_t minute;
+ /* Current minute (0-59) */
+ uint8_t second;
+ /* Current second (0-59) */
+ uint8_t unused_0;
+ uint16_t millisecond;
+ /* Current millisecond (0-999) */
+ uint16_t zone;
+ /* Minutes east of UTC, 0xffff if TZ is not known */
+ /* Time zone is Coordinated Universal Time (UTC) */
+ #define HWRM_FW_SET_TIME_INPUT_ZONE_UTC UINT32_C(0x0)
+ /* Time zone is not known */
+ #define HWRM_FW_SET_TIME_INPUT_ZONE_UNKNOWN UINT32_C(0xffff)
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_fw_set_time_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_fw_get_time */
+/* Description: Query the HWRM firmware's notion of the current date/time. */
+/* Input (16 bytes) */
+
+struct hwrm_fw_get_time_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_fw_get_time_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t year;
+ /* Current year */
+ /* Date/time is not known */
+ #define HWRM_FW_GET_TIME_OUTPUT_YEAR_UNKNOWN UINT32_C(0x0)
+ uint8_t month;
+ /* Current month of year (1-12) */
+ uint8_t day;
+ /* Current day of month (1-31) */
+ uint8_t hour;
+ /* Current hour (0-23) */
+ uint8_t minute;
+ /* Current minute (0-59) */
+ uint8_t second;
+ /* Current second (0-59) */
+ uint8_t unused_0;
+ uint16_t millisecond;
+ /* Current millisecond (0-999) */
+ uint16_t zone;
+ /* Minutes east of UTC, 0xffff if TZ is not known */
+ /* Time zone is Coordinated Universal Time (UTC) */
+ #define HWRM_FW_GET_TIME_OUTPUT_ZONE_UTC UINT32_C(0x0)
+ /* Time zone is not known */
+ #define HWRM_FW_GET_TIME_OUTPUT_ZONE_UNKNOWN UINT32_C(0xffff)
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_exec_fwd_resp */
+/*
+ * Description: This command is used to send an encapsulated request to the
+ * HWRM. This command instructs the HWRM to execute the request and forward the
+ * response of the encapsulated request to the location specified in the
+ * original request that is encapsulated. The target id of this command shall be
+ * set to 0xFFFF (HWRM). The response location in this command shall be used to
+ * acknowledge the receipt of the encapsulated request and forwarding of the
+ * response.
+ */
+/* Input (128 bytes) */
+
+struct hwrm_exec_fwd_resp_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t encap_request[26];
+ /*
+ * This is an encapsulated request. This request should be executed by
+ * the HWRM and the response should be provided in the response buffer
+ * inside the encapsulated request.
+ */
+ uint16_t encap_resp_target_id;
+ /*
+ * This value indicates the target id of the response to the
+ * encapsulated request. 0x0 - 0xFFF8 - Used for function ids 0xFFF8 -
+ * 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_exec_fwd_resp_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_reject_fwd_resp */
+/*
+ * Description: This command is used to send an encapsulated request to the
+ * HWRM. This command instructs the HWRM to reject the request and forward the
+ * error response of the encapsulated request to the location specified in the
+ * original request that is encapsulated. The target id of this command shall be
+ * set to 0xFFFF (HWRM). The response location in this command shall be used to
+ * acknowledge the receipt of the encapsulated request and forwarding of the
+ * response.
+ */
+/* Input (128 bytes) */
+
+struct hwrm_reject_fwd_resp_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t encap_request[26];
+ /*
+ * This is an encapsulated request. This request should be rejected by
+ * the HWRM and the error response should be provided in the response
+ * buffer inside the encapsulated request.
+ */
+ uint16_t encap_resp_target_id;
+ /*
+ * This value indicates the target id of the response to the
+ * encapsulated request. 0x0 - 0xFFF8 - Used for function ids 0xFFF8 -
+ * 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_reject_fwd_resp_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_fwd_resp */
+/*
+ * Description: This command is used to send an encapsulated response to the
+ * HWRM. The HWRM shall forward this response based on the target id. The
+ * response address provided in this command shall be used to acknowledge the
+ * receipt of the encapsulated response. The encapsulated response address
+ * provided in this command shall be used to provide the encapsulated response.
+ */
+/* Input (40 bytes) */
+
+struct hwrm_fwd_resp_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t encap_resp_target_id;
+ /*
+ * This value indicates the target id of the encapsulated response. 0x0
+ * - 0xFFF8 - Used for function ids 0xFFF8 - 0xFFFE - Reserved for
+ * internal processors 0xFFFF - HWRM
+ */
+ uint16_t encap_resp_cmpl_ring;
+ /*
+ * This value indicates the completion ring the encapsulated response
+ * will be optionally completed on. If the value is -1, then no CR
+ * completion shall be generated for the encapsulated response. Any
+ * other value must be a valid CR ring_id value. If a valid
+ * encap_resp_cmpl_ring is provided, then a CR completion shall be
+ * generated for the encapsulated response.
+ */
+ uint16_t encap_resp_len;
+ /* This field indicates the length of encapsulated response. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint64_t encap_resp_addr;
+ /*
+ * This is the host address where the encapsulated response will be
+ * written. This area must be 16B aligned and must be cleared to zero
+ * before the original request is made.
+ */
+ uint32_t encap_resp[24];
+ /* This is an encapsulated response. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_fwd_resp_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_fwd_async_event_cmpl */
+/*
+ * Description: This command is used to send an encapsulated asynchronous event
+ * completion to the HWRM. The HWRM shall forward this asynchronous event
+ * completion to target(s) specified in the command. The HWRM shall complete
+ * this command only after forwarding asynchronous event completion to specified
+ * targets.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_fwd_async_event_cmpl_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t encap_async_event_target_id;
+ /*
+ * This value indicates the target id of the encapsulated asynchronous
+ * event. 0x0 - 0xFFF8 - Used for function ids 0xFFF8 - 0xFFFE -
+ * Reserved for internal processors 0xFFFF - Broadcast to all children
+ * VFs (only applicable when a PF is the requester)
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2[3];
+ uint8_t unused_3;
+ uint32_t encap_async_event_cmpl[4];
+ /* This is an encapsulated asynchronous event completion. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_fwd_async_event_cmpl_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_temp_monitor_query */
+/*
+ * Description: A temperature monitor is used to query the device temperature.
+ */
+/* Input (16 bytes) */
+
+struct hwrm_temp_monitor_query_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_temp_monitor_query_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t temp;
+ /* The HWRM shall provide the current temperature of device in Celsius. */
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_wol_filter_alloc */
+/*
+ * Description: A Wake-On-LAN (WoL) filter is a filter resource that is used to
+ * identify a WoL packet. # Among all function drivers, the HWRM shall only
+ * allow PF drivers to allocate WoL filters. # The HWRM shall not allow VF
+ * drivers to allocate any WoL filters. # When partitioning is enabled and WoL
+ * is supported, the HWRM shall support at least one WoL filter per partition. #
+ * The HWRM shall retain a WoL filter setting until the filter is freed. # If
+ * the HWRM client is a function driver, then the HWRM shall not allow the HWRM
+ * client to set up WoL filters on the port that the function is not associated
+ * with. # If the HWRM client is one of the trusted embedded services (e.g.
+ * management service), the the HWRM shall allow the HWRM client to set up WoL
+ * filters on any port of the device.
+ */
+/* Input (64 bytes) */
+
+struct hwrm_wol_filter_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ uint32_t enables;
+ /* This bit must be '1' for the mac_address field to be configured. */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_ENABLES_MAC_ADDRESS UINT32_C(0x1)
+ /* This bit must be '1' for the pattern_offset field to be configured. */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_ENABLES_PATTERN_OFFSET UINT32_C(0x2)
+ /* This bit must be '1' for the pattern_buf_size field to be configured. */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_ENABLES_PATTERN_BUF_SIZE UINT32_C(0x4)
+ /* This bit must be '1' for the pattern_buf_addr field to be configured. */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_ENABLES_PATTERN_BUF_ADDR UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the pattern_mask_addr field to be
+ * configured.
+ */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_ENABLES_PATTERN_MASK_ADDR UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the pattern_mask_size field to be
+ * configured.
+ */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_ENABLES_PATTERN_MASK_SIZE UINT32_C(0x20)
+ uint16_t port_id;
+ /* Port ID of port on which WoL filter is configured. */
+ uint8_t wol_type;
+ /* This value represents a Wake-on-LAN type. */
+ /* Magic Paket */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_WOL_TYPE_MAGICPKT UINT32_C(0x0)
+ /* Bitmap */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_WOL_TYPE_BMP UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_WOL_FILTER_ALLOC_INPUT_WOL_TYPE_INVALID UINT32_C(0xff)
+ uint8_t unused_0;
+ uint32_t unused_1;
+ uint8_t mac_address[6];
+ /*
+ * # If this field is enabled and magic packet WoL filter type is
+ * specified in this command, the value set in this field shall be used
+ * in setting the magic packet based WoL filter. # If this field is not
+ * enabled and magic packet WoL filter type is specified and port id is
+ * specified to 0xFF in this command, then the HWRM shall use default
+ * MAC address configured on the function associated with the HWRM
+ * client. # If this field is not enabled and magic packet WoL filter
+ * type is specified and port id is not specified to 0xFF in this
+ * command, then the HWRM shall use default MAC address configured on
+ * the port.
+ */
+ uint16_t pattern_offset;
+ /*
+ * The offset from the beginning of MAC header where pattern should be
+ * matched. Applies to bitmap WoL.
+ */
+ uint16_t pattern_buf_size;
+ /* The size of the pattern that is being matched. Applies to bitmap WoL. */
+ uint16_t pattern_mask_size;
+ /* The size of the pattern mask. Applies to bitmap WoL. */
+ uint32_t unused_2;
+ uint64_t pattern_buf_addr;
+ /* Physical address of the pattern buffer. Applies to bitmap WoL. */
+ uint64_t pattern_mask_addr;
+ /* Physical address of the pattern mask. Applies to bitmap WoL. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_wol_filter_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t wol_filter_id;
+ /* This value identifies a Wake-on-LAN (WoL) filter. */
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_wol_filter_free */
+/*
+ * Description: Free a WoL filter. # Among all function drivers, the HWRM shall
+ * only allow PF drivers to free WoL filters. # The HWRM shall not allow VF
+ * drivers to free any WoL filters. # The HWRM shall not allow a function driver
+ * to free an Out-Of-Box WoL filter. # The HWRM shall not allow a function
+ * driver to free a WoL filter on a port that the corresponding function is not
+ * associated with. # The HWRM shall not allow a function driver to free a WoL
+ * filter on a function that the function driver is not associated with.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_wol_filter_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * # When this bit is set to '1', then all active WoL filters on the
+ * port are requested to be freed. # If the a function driver sets this
+ * flag to '1', then the HWRM shall free all active WoL filters that are
+ * not set by other function drivers on that port.
+ */
+ #define HWRM_WOL_FILTER_FREE_INPUT_FLAGS_FREE_ALL_WOL_FILTERS UINT32_C(0x1)
+ uint32_t enables;
+ /* This bit must be '1' for the wol_filter_id field to be configured. */
+ #define HWRM_WOL_FILTER_FREE_INPUT_ENABLES_WOL_FILTER_ID UINT32_C(0x1)
+ uint16_t port_id;
+ /* Port ID of the port on which WoL filter(s) is (are) being freed. */
+ uint8_t wol_filter_id;
+ /* The HWRM shall ignore this field if free_all_wol_filters flag is set. */
+ uint8_t unused_0[5];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_wol_filter_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_wol_filter_qcfg */
+/*
+ * Description: Query WoL filter configuration. # Among all function drivers,
+ * the HWRM shall only allow PF drivers to query WoL filters. # The HWRM shall
+ * not allow VF drivers to query any WoL filters. # The HWRM shall return WoL
+ * filters that are active on the associated port for which this query is being
+ * performed. # If the HWRM client is a function driver, then the HWRM shall not
+ * allow the HWRM client to query WoL filters that are set up by other function
+ * drivers. # If the HWRM client is a function driver, then the HWRM shall not
+ * allow the HWRM client to query WoL filters on the port that the function is
+ * not associated with. # If the HWRM client is one of the trusted embedded
+ * service (e.g. management service), the the HWRM shall allow the HWRM client
+ * to query WoL filters on any port of the device.
+ */
+/* Input (56 bytes) */
+
+struct hwrm_wol_filter_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port on which WoL filter that is being queried. */
+ uint16_t handle;
+ /*
+ * This is an opaque handle used to access filters. # The HWRM client
+ * shall set this field to 0x0000 to begin the query. # After the first
+ * query, the HWRM client shall retrieve next filters (if they exist)
+ * using the HWRM provided handle in the response.
+ */
+ uint32_t unused_0;
+ uint64_t pattern_buf_addr;
+ /*
+ * Physical address of the pattern buffer. Applies to bitmap WoL filter
+ * only. # Value of 0 indicates an invalid buffer address. If this field
+ * is set to 0, then HWRM shall ignore pattern_buf_size. # If the HWRM
+ * client provides an invalid buffer address for the pattern, then the
+ * HWRM is not required to provide pattern when the response contains a
+ * bitmap WoL filter.
+ */
+ uint64_t pattern_buf_size;
+ /* The sixe of the pattern buffer. Applies to bitmap WoL filter only. */
+ uint64_t pattern_mask_addr;
+ /*
+ * Physical address of the pattern mask. Applies to bitmap WoL filter
+ * only. # Value of 0 indicates an invalid pattern mask address. If this
+ * field is set to 0, then HWRM shall ignore pattern_mask_size. # If the
+ * HWRM client provides an invalid mask address for the pattern, then
+ * the HWRM is not required to provide mask when the response contains a
+ * bitmap WoL filter.
+ */
+ uint64_t pattern_mask_size;
+ /*
+ * The size of the buffer for pattern mask. Applies to bitmap WoL filter
+ * only.
+ */
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+
+struct hwrm_wol_filter_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t next_handle;
+ /*
+ * This is the next handle that is used to access filters. # If this
+ * field is set to 0x0000, then no WoL filters are currently configured
+ * on this port and all other fields in the output shall be ignored by
+ * the HWRM client. # If this field is set to neither 0x0000 nor 0xFFFF,
+ * then the wol_filter_id is valid and the parameters provided in the
+ * response are based on the wol_type. # If this field is set to 0xFFFF,
+ * then there are no remaining configured WoL filters to be queried for
+ * the queried function after this response, wol_filter_id is valid and
+ * the parameters provided in the response are based on the wol_type.
+ */
+ uint8_t wol_filter_id;
+ /* This value identifies the filter returned in this response. */
+ uint8_t wol_type;
+ /*
+ * This value identifies the type of WoL filter returned in this
+ * response.
+ */
+ /* Magic Paket */
+ #define HWRM_WOL_FILTER_QCFG_OUTPUT_WOL_TYPE_MAGICPKT UINT32_C(0x0)
+ /* Bitmap */
+ #define HWRM_WOL_FILTER_QCFG_OUTPUT_WOL_TYPE_BMP UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_WOL_FILTER_QCFG_OUTPUT_WOL_TYPE_INVALID UINT32_C(0xff)
+ uint32_t unused_0;
+ uint8_t mac_address[6];
+ /*
+ * The MAC address value used by the WoL filter. Applies to magic packet
+ * based WoL.
+ */
+ uint16_t pattern_offset;
+ /*
+ * The offset from the beginning of MAC header where pattern should be
+ * matched. Applies to bitmap WoL.
+ */
+ uint16_t pattern_size;
+ /*
+ * The actual size of the pattern that is being returned. Applies to
+ * bitmap WoL.
+ */
+ uint16_t pattern_mask_size;
+ /*
+ * The actual size of the pattern mask that is being returned. Applies
+ * to bitmap WoL.
+ */
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_wol_reason_qcfg */
+/* Description: Query WoL reason for the last system wake up. */
+/* Input (40 bytes) */
+
+struct hwrm_wol_reason_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port for which this query is for. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2[3];
+ uint8_t unused_3;
+ uint64_t wol_pkt_buf_addr;
+ /* Physical address of the packet buffer for querying WoL packet. */
+ uint64_t wol_pkt_buf_size;
+ /* The size of the buffer for the WoL packet. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_wol_reason_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint8_t wol_filter_id;
+ /*
+ * This value identifies the filter that matched the last WoL packet.
+ * This id is only valid with valid WoL reason.
+ */
+ uint8_t wol_reason;
+ /*
+ * This value identifies the type of WoL reason returned in this
+ * response. When the wol_type is set to invalid, then there is no WoL
+ * event that happened during last system wake-up.
+ */
+ /* Magic Paket */
+ #define HWRM_WOL_REASON_QCFG_OUTPUT_WOL_REASON_MAGICPKT UINT32_C(0x0)
+ /* Bitmap */
+ #define HWRM_WOL_REASON_QCFG_OUTPUT_WOL_REASON_BMP UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_WOL_REASON_QCFG_OUTPUT_WOL_REASON_INVALID UINT32_C(0xff)
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_dbg_dump */
+/*
+ * Description: This command is used by to initiate the dump of debug
+ * information to a driver specified address.
+ */
+/* Input (40 bytes) */
+
+struct hwrm_dbg_dump_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t handle;
+ /*
+ * Handle used to dump debug data. handle = 0 indicates the beginning of
+ * the dump. handle != 0 indicates the request to dump the next part.
+ */
+ uint32_t unused_0;
+ uint64_t host_dbg_dump_addr;
+ /*
+ * Address of the host buffer where the debug data is requested to be
+ * dumped.
+ */
+ uint64_t host_dbg_dump_addr_len;
+ /* Length of host buffer used for transferring debug data. */
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_dbg_dump_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t nexthandle;
+ /*
+ * Handle used to indicate availability of additional debug data.
+ * nexthandle = 0 indicates that there is no more debug data available.
+ * nexthandle != 0 indicates the handle value that should be used to
+ * request the next part of debug data.
+ */
+ uint32_t dbg_data_len;
+ /* The number of bytes of debug data written to debug dump buffer. */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_raw_write_blk */
+/*
+ * Note: Write an unmanaged block of data at any physical offset within the
+ * NVRAM. Used for initial provisioning/manufacturing purposes only. Implemented
+ * in the ChiMP boot-strap firmware (fwutil.bin) only.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_nvm_raw_write_blk_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t host_src_addr;
+ /*
+ * 64-bit Host Source Address. This is the loation of the source data to
+ * be written.
+ */
+ uint32_t dest_addr;
+ /*
+ * 32-bit Destination Address. This is the NVRAM byte-offset where the
+ * source data will be written to.
+ */
+ uint32_t len;
+ /* Length of data to be written, in bytes. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_raw_write_blk_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_read */
+/*
+ * Note: Read the contents of an NVRAM item as referenced (indexed) by an
+ * existing directory entry.
+ */
+/* Input (40 bytes) */
+
+struct hwrm_nvm_read_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t host_dest_addr;
+ /*
+ * 64-bit Host Destination Address. This is the host address where the
+ * data will be written to.
+ */
+ uint16_t dir_idx;
+ /* The 0-based index of the directory entry. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t offset;
+ /* The NVRAM byte-offset to read from. */
+ uint32_t len;
+ /* The length of the data to be read, in bytes. */
+ uint32_t unused_2;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_read_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_raw_dump */
+/* Note: Dump a raw block of data from NVRAM. */
+/* Input (32 bytes) */
+
+struct hwrm_nvm_raw_dump_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t host_dest_addr;
+ /*
+ * 64-bit Host Destination Address. This is the host address where the
+ * data will be written to.
+ */
+ uint32_t offset;
+ /* 32-bit NVRAM byte-offset to read from. */
+ uint32_t len;
+ /* Total length of NVRAM contents to be read, in bytes. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_raw_dump_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_get_dir_entries */
+/*
+ * Description: Read the NVRAM directory. Each directory entry is at least 24
+ * bytes in length and contains the: - 16-bit directory entry type
+ * (BNX_DIR_TYPE_* value) - 16-bit ordinal (instance of this directory entry
+ * type) - 16-bit extension flags (identifies inactive entries and entries for
+ * firmware update) - 16-bit attribute flags (identifies entries with a
+ * purposely invalid chksum value) - 32-bit byte-offset into NVRAM where this
+ * item data is located - 32-bit length of allocated NVRAM for item, in bytes
+ * (multiple of block size) - 32-bit length of data (excluding padding), in
+ * bytes (may be 0) - 32-bit data checksum (CRC-32) See the
+ * bnxnvm_directory_entry_t definition in the file bnxnvm_defs.h.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_nvm_get_dir_entries_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t host_dest_addr;
+ /*
+ * 64-bit Host Destination Address. This is the host address where the
+ * directory will be written.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_get_dir_entries_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_get_dir_info */
+/* Note: Get Directory Header info. */
+/* Input (16 bytes) */
+
+struct hwrm_nvm_get_dir_info_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_nvm_get_dir_info_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t entries;
+ /* Number of directory entries in the directory. */
+ uint32_t entry_length;
+ /* Size of each directory entry, in bytes. */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_write */
+/*
+ * Note: Write to the allocated NVRAM of an item referenced by an existing
+ * directory entry.
+ */
+/* Input (48 bytes) */
+
+struct hwrm_nvm_write_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t host_src_addr;
+ /* 64-bit Host Source Address. This is where the source data is. */
+ uint16_t dir_type;
+ /*
+ * The Directory Entry Type (valid values are defined in the
+ * bnxnvm_directory_type enum defined in the file bnxnvm_defs.h).
+ */
+ uint16_t dir_ordinal;
+ /*
+ * Directory ordinal. The 0-based instance of the combined Directory
+ * Entry Type and Extension.
+ */
+ uint16_t dir_ext;
+ /*
+ * The Directory Entry Extension flags (see BNX_DIR_EXT_* in the file
+ * bnxnvm_defs.h).
+ */
+ uint16_t dir_attr;
+ /*
+ * Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file
+ * bnxnvm_defs.h).
+ */
+ uint32_t dir_data_length;
+ /*
+ * Length of data to write, in bytes. May be less than or equal to the
+ * allocated size for the directory entry. The data length stored in the
+ * directory entry will be updated to reflect this value once the write
+ * is complete.
+ */
+ uint16_t option;
+ /* Option. */
+ uint16_t flags;
+ /*
+ * When this bit is '1', the original active image will not be removed.
+ * TBD: what purpose is this?
+ */
+ #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG UINT32_C(0x1)
+ uint32_t dir_item_length;
+ /*
+ * The requested length of the allocated NVM for the item, in bytes.
+ * This value may be greater than or equal to the specified data length
+ * (dir_data_length). If this value is less than the specified data
+ * length, it will be ignored. The response will contain the actual
+ * allocated item length, which may be greater than the requested item
+ * length. The purpose for allocating more than the required number of
+ * bytes for an item's data is to pre-allocate extra storage (padding)
+ * to accommodate the potential future growth of an item (e.g. upgraded
+ * firmware with a size increase, log growth, expanded configuration
+ * data).
+ */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_write_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t dir_item_length;
+ /*
+ * Length of the allocated NVM for the item, in bytes. The value may be
+ * greater than or equal to the specified data length or the requested
+ * item length. The actual item length used when creating a new
+ * directory entry will be a multiple of an NVM block size.
+ */
+ uint16_t dir_idx;
+ /* The directory index of the created or modified item. */
+ uint8_t unused_0;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_modify */
+/*
+ * Note: Modify the contents of an NVRAM item as referenced (indexed) by an
+ * existing directory entry.
+ */
+/* Input (40 bytes) */
+
+struct hwrm_nvm_modify_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t host_src_addr;
+ /* 64-bit Host Source Address. This is where the modified data is. */
+ uint16_t dir_idx;
+ /* 16-bit directory entry index. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t offset;
+ /* 32-bit NVRAM byte-offset to modify content from. */
+ uint32_t len;
+ /*
+ * Length of data to be modified, in bytes. The length shall be non-
+ * zero.
+ */
+ uint32_t unused_2;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_modify_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_find_dir_entry */
+/*
+ * Note: Search a directory entry in the directory by either directory entry
+ * index or directory entry parameters.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_nvm_find_dir_entry_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the dir_idx_valid field to be configured. */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_ENABLES_DIR_IDX_VALID UINT32_C(0x1)
+ uint16_t dir_idx;
+ /* Directory Entry Index */
+ uint16_t dir_type;
+ /* Directory Entry (Image) Type */
+ uint16_t dir_ordinal;
+ /* Directory ordinal. The instance of this Directory Type */
+ uint16_t dir_ext;
+ /* The Directory Entry Extension flags. */
+ uint8_t opt_ordinal;
+ /* This value indicates the search option using dir_ordinal. */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_MASK UINT32_C(0x3)
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_SFT 0
+ /* Equal to specified ordinal value. */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_EQ UINT32_C(0x0)
+ /* Greater than or equal to specified ordinal value */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GE UINT32_C(0x1)
+ /* Greater than specified ordinal value */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT UINT32_C(0x2)
+ uint8_t unused_1[3];
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+
+struct hwrm_nvm_find_dir_entry_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t dir_item_length;
+ /* Allocated NVRAM for this directory entry, in bytes. */
+ uint32_t dir_data_length;
+ /* Size of the stored data for this directory entry, in bytes. */
+ uint32_t fw_ver;
+ /*
+ * Firmware version. Only valid if the directory entry is for embedded
+ * firmware stored in APE_BIN Format.
+ */
+ uint16_t dir_ordinal;
+ /* Directory ordinal. */
+ uint16_t dir_idx;
+ /* Directory Entry Index */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_erase_dir_entry */
+/*
+ * Note: Remove a directory entry specified by the directory entry index from
+ * the directory.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_nvm_erase_dir_entry_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t dir_idx;
+ /* Directory Entry Index */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_erase_dir_entry_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_get_dev_info */
+/*
+ * Note: Get device info. Return Manufacturer_ID, Device_ID, block_size,
+ * nvram_size, reserved_size and available_size.
+ */
+/* Input (16 bytes) */
+
+struct hwrm_nvm_get_dev_info_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+
+struct hwrm_nvm_get_dev_info_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t manufacturer_id;
+ /* Manufacturer ID. */
+ uint16_t device_id;
+ /* Device ID. */
+ uint32_t sector_size;
+ /* Sector size of the NVRAM device. */
+ uint32_t nvram_size;
+ /* Total size, in bytes of the NVRAM device. */
+ uint32_t reserved_size;
+ uint32_t available_size;
+ /*
+ * Available size that can be used, in bytes. Available size is the
+ * NVRAM size take away the used size and reserved size.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_mod_dir_entry */
+/* Note: Modify a directory entry parameters in the directory. */
+/* Input (32 bytes) */
+
+struct hwrm_nvm_mod_dir_entry_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the checksum field to be configured. */
+ #define HWRM_NVM_MOD_DIR_ENTRY_INPUT_ENABLES_CHECKSUM UINT32_C(0x1)
+ uint16_t dir_idx;
+ /* Directory Entry Index */
+ uint16_t dir_ordinal;
+ /* Directory ordinal. The (0-based) instance of this Directory Type. */
+ uint16_t dir_ext;
+ /*
+ * The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension
+ * flag definitions).
+ */
+ uint16_t dir_attr;
+ /*
+ * Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute
+ * flag definitions).
+ */
+ uint32_t checksum;
+ /*
+ * If valid, then this field updates the checksum value of the content
+ * in the directory entry.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_mod_dir_entry_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_verify_update */
+/*
+ * Description: Verify updated content of a directory entry. Before this
+ * verification, there should be two valid directory entries of the given
+ * directory type (one with "UPDATE" directory extension flag and the current
+ * one "ACTIVE"). Below are steps the HWRM performs for executing this command:
+ * # The HWRM finds the directory entry with "UDPATE" extension flag based on
+ * input parameters. The new directory entry should already have updated
+ * contents. # The HWRM performs signature verification of the updated content.
+ * # If the signature verification is successful, the two directory entries are
+ * switched (the verified updated entry is made active and the current "ACTIVE"
+ * entry is marked with "UPDATE" extension flag). Implementation notes: # The
+ * HWRM shall allow this command to be requested against any dir_type value (and
+ * not limit it to a subset). # In the case of an updated HWRM firmware, the new
+ * firmware version shall not automatically take effect (i.e. be executed).
+ */
+/* Input (24 bytes) */
+
+struct hwrm_nvm_verify_update_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t dir_type;
+ /* Directory Entry Type, to be verified. */
+ uint16_t dir_ordinal;
+ /* Directory ordinal. The instance of the Directory Type to be verified. */
+ uint16_t dir_ext;
+ /*
+ * The Directory Entry Extension flags. The "UPDATE" extension flag must
+ * be set in this value. A corresponding directory entry with the same
+ * type and ordinal values but *without* the "UPDATE" extension flag
+ * must also exist. The other flags of the extension must be identical
+ * between the active and update entries.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_nvm_verify_update_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_nvm_install_update */
+/*
+ * Description: Install a staged NVM package. A package file must first be
+ * staged into the "UPDATE" NVM item. This staging is accomplished using the
+ * nvm_write and/or nvm_modify HWRM commands.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_nvm_install_update_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t install_type;
+ /*
+ * Installation type. If the value 3 through 0xffff is used, only
+ * packaged items with that type value will be installed and conditional
+ * installation directives for those packaged items will be over-ridden
+ * (i.e. 'create' or 'replace' will be treated as 'install').
+ */
+ /*
+ * Perform a normal package installation. Conditional
+ * installation directives (e.g. 'create' and 'replace') of
+ * packaged items will be followed.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_NORMAL UINT32_C(0x0)
+ /*
+ * Install all packaged items regardless of installation
+ * directive (i.e. treat all packaged items as though they have
+ * an installation directive of 'install').
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL UINT32_C(0xffffffff)
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_nvm_install_update_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint64_t installed_items;
+ /*
+ * Bit-mask of successfully installed items. Bit-0 corresponding to the
+ * first packaged item, Bit-1 for the second item, etc. A value of 0
+ * indicates that no items were successfully installed.
+ */
+ uint8_t result;
+ /* result is 8 b */
+ /* There was no problem with the package installation. */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS UINT32_C(0x0)
+ uint8_t problem_item;
+ /* problem_item is 8 b */
+ /* There was no problem with any packaged items. */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_NONE UINT32_C(0x0)
+ /* There was a problem with the NVM package itself. */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE UINT32_C(0xff)
+ uint8_t reset_required;
+ /* reset_required is 8 b */
+ /*
+ * No reset is required for installed/updated firmware or
+ * microcode to take effect.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_NONE UINT32_C(0x0)
+ /*
+ * A PCIe reset (e.g. system reboot) is required for newly
+ * installed/updated firmware or microcode to take effect.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_PCI UINT32_C(0x1)
+ /*
+ * A controller power reset (e.g. system power-cycle) is
+ * required for newly installed/updated firmware or microcode to
+ * take effect. Some newly installed/updated firmware or
+ * microcode may still take effect upon the next PCIe reset.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER UINT32_C(0x2)
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+#endif /* _HSI_STRUCT_DEF_EXTERNAL_H_ */
Index: sys/dev/bnxt/if_bnxt.c
===================================================================
--- /dev/null
+++ sys/dev/bnxt/if_bnxt.c
@@ -0,0 +1,2359 @@
+/*-
+ * Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2016 Broadcom, All Rights Reserved.
+ * The term Broadcom refers to Broadcom Limited and/or its subsidiaries
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/socket.h>
+#include <sys/kernel.h>
+#include <sys/bus.h>
+#include <sys/module.h>
+#include <sys/rman.h>
+#include <sys/endian.h>
+#include <sys/sockio.h>
+#include <sys/priv.h>
+
+#include <machine/bus.h>
+#include <machine/resource.h>
+
+#include <dev/pci/pcireg.h>
+#include <dev/pci/pcivar.h>
+
+#include <net/if.h>
+#include <net/if_media.h>
+#include <net/if_var.h>
+#include <net/ethernet.h>
+#include <net/iflib.h>
+
+#include "opt_inet.h"
+#include "opt_inet6.h"
+#include "opt_rss.h"
+
+#include "ifdi_if.h"
+
+#include "bnxt.h"
+#include "bnxt_hwrm.h"
+#include "bnxt_ioctl.h"
+#include "bnxt_sysctl.h"
+#include "hsi_struct_def.h"
+
+/*
+ * PCI Device ID Table
+ */
+
+static pci_vendor_info_t bnxt_vendor_info_array[] =
+{
+ PVID(BROADCOM_VENDOR_ID, BCM57301,
+ "Broadcom BCM57301 NetXtreme-C 10Gb Ethernet Controller"),
+ PVID(BROADCOM_VENDOR_ID, BCM57302,
+ "Broadcom BCM57302 NetXtreme-C 10Gb/25Gb Ethernet Controller"),
+ PVID(BROADCOM_VENDOR_ID, BCM57304,
+ "Broadcom BCM57304 NetXtreme-C 10Gb/25Gb/40Gb/50Gb Ethernet Controller"),
+ PVID(BROADCOM_VENDOR_ID, BCM57402,
+ "Broadcom BCM57402 NetXtreme-E 10Gb Ethernet Controller"),
+ PVID(BROADCOM_VENDOR_ID, BCM57404,
+ "Broadcom BCM57404 NetXtreme-E 10Gb/25Gb Ethernet Controller"),
+ PVID(BROADCOM_VENDOR_ID, BCM57406,
+ "Broadcom BCM57406 NetXtreme-E 10GBase-T Ethernet Controller"),
+ PVID(BROADCOM_VENDOR_ID, BCM57402_NPAR,
+ "Broadcom BCM57402 NetXtreme-E Partition"),
+ PVID(BROADCOM_VENDOR_ID, BCM57407,
+ "Broadcom BCM57407 NetXtreme-E 10GBase-T Ethernet Controller"),
+ PVID(BROADCOM_VENDOR_ID, BCM57404_NPAR,
+ "Broadcom BCM57404 NetXtreme-E Partition"),
+ PVID(BROADCOM_VENDOR_ID, BCM57406_NPAR,
+ "Broadcom BCM57406 NetXtreme-E Partition"),
+ PVID(BROADCOM_VENDOR_ID, BCM57407_SFP,
+ "Broadcom BCM57407 NetXtreme-E 25Gb Ethernet Controller"),
+ PVID(BROADCOM_VENDOR_ID, BCM57304_VF,
+ "Broadcom BCM57304 NetXtreme-C Virtual Function"),
+ PVID(BROADCOM_VENDOR_ID, BCM57404_VF,
+ "Broadcom BCM57404 NetXtreme-E Virtual Function"),
+ /* required last entry */
+
+ PVID_END
+};
+
+/*
+ * Function prototypes
+ */
+
+static void *bnxt_register(device_t dev);
+
+/* Soft queue setup and teardown */
+static int bnxt_tx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs,
+ uint64_t *paddrs, int ntxqs, int ntxqsets);
+static int bnxt_rx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs,
+ uint64_t *paddrs, int nrxqs, int nrxqsets);
+static void bnxt_queues_free(if_ctx_t ctx);
+
+/* Device setup and teardown */
+static int bnxt_attach_pre(if_ctx_t ctx);
+static int bnxt_attach_post(if_ctx_t ctx);
+static int bnxt_detach(if_ctx_t ctx);
+
+/* Device configuration */
+static void bnxt_init(if_ctx_t ctx);
+static void bnxt_stop(if_ctx_t ctx);
+static void bnxt_multi_set(if_ctx_t ctx);
+static int bnxt_mtu_set(if_ctx_t ctx, uint32_t mtu);
+static void bnxt_media_status(if_ctx_t ctx, struct ifmediareq * ifmr);
+static int bnxt_media_change(if_ctx_t ctx);
+static int bnxt_promisc_set(if_ctx_t ctx, int flags);
+static uint64_t bnxt_get_counter(if_ctx_t, ift_counter);
+static void bnxt_update_admin_status(if_ctx_t ctx);
+
+/* Interrupt enable / disable */
+static void bnxt_intr_enable(if_ctx_t ctx);
+static int bnxt_queue_intr_enable(if_ctx_t ctx, uint16_t qid);
+static void bnxt_disable_intr(if_ctx_t ctx);
+static int bnxt_msix_intr_assign(if_ctx_t ctx, int msix);
+
+/* vlan support */
+static void bnxt_vlan_register(if_ctx_t ctx, uint16_t vtag);
+static void bnxt_vlan_unregister(if_ctx_t ctx, uint16_t vtag);
+
+/* ioctl */
+static int bnxt_priv_ioctl(if_ctx_t ctx, u_long command, caddr_t data);
+
+/* Internal support functions */
+static int bnxt_probe_phy(struct bnxt_softc *softc);
+static void bnxt_add_media_types(struct bnxt_softc *softc);
+static int bnxt_pci_mapping(struct bnxt_softc *softc);
+static void bnxt_pci_mapping_free(struct bnxt_softc *softc);
+static int bnxt_update_link(struct bnxt_softc *softc, bool chng_link_state);
+static int bnxt_handle_def_cp(void *arg);
+static int bnxt_handle_rx_cp(void *arg);
+static void bnxt_clear_ids(struct bnxt_softc *softc);
+static void inline bnxt_do_enable_intr(struct bnxt_cp_ring *cpr);
+static void inline bnxt_do_disable_intr(struct bnxt_cp_ring *cpr);
+static void bnxt_mark_cpr_invalid(struct bnxt_cp_ring *cpr);
+static void bnxt_def_cp_task(void *context);
+static void bnxt_handle_async_event(struct bnxt_softc *softc,
+ struct cmpl_base *cmpl);
+static uint8_t get_phy_type(struct bnxt_softc *softc);
+static uint64_t bnxt_get_baudrate(struct bnxt_link_info *link);
+
+/*
+ * Device Interface Declaration
+ */
+
+static device_method_t bnxt_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_register, bnxt_register),
+ DEVMETHOD(device_probe, iflib_device_probe),
+ DEVMETHOD(device_attach, iflib_device_attach),
+ DEVMETHOD(device_detach, iflib_device_detach),
+ DEVMETHOD(device_shutdown, iflib_device_shutdown),
+ DEVMETHOD(device_suspend, iflib_device_suspend),
+ DEVMETHOD(device_resume, iflib_device_resume),
+ DEVMETHOD_END
+};
+
+static driver_t bnxt_driver = {
+ "bnxt", bnxt_methods, sizeof(struct bnxt_softc),
+};
+
+devclass_t bnxt_devclass;
+DRIVER_MODULE(bnxt, pci, bnxt_driver, bnxt_devclass, 0, 0);
+
+MODULE_DEPEND(bnxt, pci, 1, 1, 1);
+MODULE_DEPEND(bnxt, ether, 1, 1, 1);
+MODULE_DEPEND(bnxt, iflib, 1, 1, 1);
+
+static device_method_t bnxt_iflib_methods[] = {
+ DEVMETHOD(ifdi_tx_queues_alloc, bnxt_tx_queues_alloc),
+ DEVMETHOD(ifdi_rx_queues_alloc, bnxt_rx_queues_alloc),
+ DEVMETHOD(ifdi_queues_free, bnxt_queues_free),
+
+ DEVMETHOD(ifdi_attach_pre, bnxt_attach_pre),
+ DEVMETHOD(ifdi_attach_post, bnxt_attach_post),
+ DEVMETHOD(ifdi_detach, bnxt_detach),
+
+ DEVMETHOD(ifdi_init, bnxt_init),
+ DEVMETHOD(ifdi_stop, bnxt_stop),
+ DEVMETHOD(ifdi_multi_set, bnxt_multi_set),
+ DEVMETHOD(ifdi_mtu_set, bnxt_mtu_set),
+ DEVMETHOD(ifdi_media_status, bnxt_media_status),
+ DEVMETHOD(ifdi_media_change, bnxt_media_change),
+ DEVMETHOD(ifdi_promisc_set, bnxt_promisc_set),
+ DEVMETHOD(ifdi_get_counter, bnxt_get_counter),
+ DEVMETHOD(ifdi_update_admin_status, bnxt_update_admin_status),
+
+ DEVMETHOD(ifdi_intr_enable, bnxt_intr_enable),
+ DEVMETHOD(ifdi_queue_intr_enable, bnxt_queue_intr_enable),
+ DEVMETHOD(ifdi_intr_disable, bnxt_disable_intr),
+ DEVMETHOD(ifdi_msix_intr_assign, bnxt_msix_intr_assign),
+
+ DEVMETHOD(ifdi_vlan_register, bnxt_vlan_register),
+ DEVMETHOD(ifdi_vlan_unregister, bnxt_vlan_unregister),
+
+ DEVMETHOD(ifdi_priv_ioctl, bnxt_priv_ioctl),
+
+ DEVMETHOD_END
+};
+
+static driver_t bnxt_iflib_driver = {
+ "bnxt", bnxt_iflib_methods, sizeof(struct bnxt_softc)
+};
+
+/*
+ * iflib shared context
+ */
+
+char bnxt_driver_version[] = "https://github.com/Broadcom/freebsd-nxt/commits/bnxt-dev";
+extern struct if_txrx bnxt_txrx;
+static struct if_shared_ctx bnxt_sctx_init = {
+ .isc_magic = IFLIB_MAGIC,
+ .isc_txrx = &bnxt_txrx,
+ .isc_driver = &bnxt_iflib_driver,
+ .isc_nfl = 2, // Number of Free Lists
+ .isc_flags = IFLIB_HAS_RXCQ | IFLIB_HAS_TXCQ,
+ .isc_q_align = PAGE_SIZE,
+ .isc_tx_maxsize = BNXT_TSO_SIZE,
+ .isc_tx_maxsegsize = BNXT_TSO_SIZE,
+ .isc_rx_maxsize = BNXT_TSO_SIZE,
+ .isc_rx_maxsegsize = BNXT_TSO_SIZE,
+
+ // Only use a single segment to avoid page size constraints
+ .isc_rx_nsegments = 1,
+ .isc_ntxqs = 2,
+ .isc_nrxqs = 3,
+ .isc_nrxd_min = {16, 16, 16},
+ .isc_nrxd_default = {PAGE_SIZE / sizeof(struct cmpl_base) * 8,
+ PAGE_SIZE / sizeof(struct rx_prod_pkt_bd),
+ PAGE_SIZE / sizeof(struct rx_prod_pkt_bd)},
+ .isc_nrxd_max = {INT32_MAX, INT32_MAX, INT32_MAX},
+ .isc_ntxd_min = {16, 16, 16},
+ .isc_ntxd_default = {PAGE_SIZE / sizeof(struct cmpl_base) * 2,
+ PAGE_SIZE / sizeof(struct tx_bd_short)},
+ .isc_ntxd_max = {INT32_MAX, INT32_MAX, INT32_MAX},
+
+ .isc_admin_intrcnt = 1,
+ .isc_vendor_info = bnxt_vendor_info_array,
+ .isc_driver_version = bnxt_driver_version,
+};
+
+if_shared_ctx_t bnxt_sctx = &bnxt_sctx_init;
+
+/*
+ * Device Methods
+ */
+
+static void *
+bnxt_register(device_t dev)
+{
+ return bnxt_sctx;
+}
+
+/*
+ * Device Dependent Configuration Functions
+*/
+
+/* Soft queue setup and teardown */
+static int
+bnxt_tx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs,
+ uint64_t *paddrs, int ntxqs, int ntxqsets)
+{
+ struct bnxt_softc *softc;
+ int i;
+ int rc;
+
+ softc = iflib_get_softc(ctx);
+
+ softc->tx_cp_rings = malloc(sizeof(struct bnxt_cp_ring) * ntxqsets,
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (!softc->tx_cp_rings) {
+ device_printf(iflib_get_dev(ctx),
+ "unable to allocate TX completion rings\n");
+ rc = ENOMEM;
+ goto cp_alloc_fail;
+ }
+ softc->tx_rings = malloc(sizeof(struct bnxt_ring) * ntxqsets,
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (!softc->tx_rings) {
+ device_printf(iflib_get_dev(ctx),
+ "unable to allocate TX rings\n");
+ rc = ENOMEM;
+ goto ring_alloc_fail;
+ }
+ rc = iflib_dma_alloc(ctx, sizeof(struct ctx_hw_stats) * ntxqsets,
+ &softc->tx_stats, 0);
+ if (rc)
+ goto dma_alloc_fail;
+ bus_dmamap_sync(softc->tx_stats.idi_tag, softc->tx_stats.idi_map,
+ BUS_DMASYNC_PREREAD);
+
+ for (i = 0; i < ntxqsets; i++) {
+ /* Set up the completion ring */
+ softc->tx_cp_rings[i].stats_ctx_id = HWRM_NA_SIGNATURE;
+ softc->tx_cp_rings[i].ring.phys_id =
+ (uint16_t)HWRM_NA_SIGNATURE;
+ softc->tx_cp_rings[i].ring.softc = softc;
+ softc->tx_cp_rings[i].ring.id =
+ (softc->scctx->isc_nrxqsets * 2) + 1 + i;
+ softc->tx_cp_rings[i].ring.doorbell =
+ softc->tx_cp_rings[i].ring.id * 0x80;
+ softc->tx_cp_rings[i].ring.ring_size =
+ softc->scctx->isc_ntxd[0];
+ softc->tx_cp_rings[i].ring.vaddr = vaddrs[i * ntxqs];
+ softc->tx_cp_rings[i].ring.paddr = paddrs[i * ntxqs];
+
+ /* Set up the TX ring */
+ softc->tx_rings[i].phys_id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->tx_rings[i].softc = softc;
+ softc->tx_rings[i].id =
+ (softc->scctx->isc_nrxqsets * 2) + 1 + i;
+ softc->tx_rings[i].doorbell = softc->tx_rings[i].id * 0x80;
+ softc->tx_rings[i].ring_size = softc->scctx->isc_ntxd[1];
+ softc->tx_rings[i].vaddr = vaddrs[i * ntxqs + 1];
+ softc->tx_rings[i].paddr = paddrs[i * ntxqs + 1];
+
+ bnxt_create_tx_sysctls(softc, i);
+ }
+
+ softc->ntxqsets = ntxqsets;
+ return rc;
+
+dma_alloc_fail:
+ free(softc->tx_rings, M_DEVBUF);
+ring_alloc_fail:
+ free(softc->tx_cp_rings, M_DEVBUF);
+cp_alloc_fail:
+ return rc;
+}
+
+static void
+bnxt_queues_free(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+
+ // Free TX queues
+ iflib_dma_free(&softc->tx_stats);
+ free(softc->tx_rings, M_DEVBUF);
+ softc->tx_rings = NULL;
+ free(softc->tx_cp_rings, M_DEVBUF);
+ softc->tx_cp_rings = NULL;
+ softc->ntxqsets = 0;
+
+ // Free RX queues
+ iflib_dma_free(&softc->rx_stats);
+ free(softc->grp_info, M_DEVBUF);
+ free(softc->ag_rings, M_DEVBUF);
+ free(softc->rx_rings, M_DEVBUF);
+ free(softc->rx_cp_rings, M_DEVBUF);
+}
+
+static int
+bnxt_rx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs,
+ uint64_t *paddrs, int nrxqs, int nrxqsets)
+{
+ struct bnxt_softc *softc;
+ int i;
+ int rc;
+
+ softc = iflib_get_softc(ctx);
+
+ softc->rx_cp_rings = malloc(sizeof(struct bnxt_cp_ring) * nrxqsets,
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (!softc->rx_cp_rings) {
+ device_printf(iflib_get_dev(ctx),
+ "unable to allocate RX completion rings\n");
+ rc = ENOMEM;
+ goto cp_alloc_fail;
+ }
+ softc->rx_rings = malloc(sizeof(struct bnxt_ring) * nrxqsets,
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (!softc->rx_rings) {
+ device_printf(iflib_get_dev(ctx),
+ "unable to allocate RX rings\n");
+ rc = ENOMEM;
+ goto ring_alloc_fail;
+ }
+ softc->ag_rings = malloc(sizeof(struct bnxt_ring) * nrxqsets,
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (!softc->ag_rings) {
+ device_printf(iflib_get_dev(ctx),
+ "unable to allocate aggregation rings\n");
+ rc = ENOMEM;
+ goto ag_alloc_fail;
+ }
+ softc->grp_info = malloc(sizeof(struct bnxt_grp_info) * nrxqsets,
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (!softc->grp_info) {
+ device_printf(iflib_get_dev(ctx),
+ "unable to allocate ring groups\n");
+ rc = ENOMEM;
+ goto grp_alloc_fail;
+ }
+
+ rc = iflib_dma_alloc(ctx, sizeof(struct ctx_hw_stats) * nrxqsets,
+ &softc->rx_stats, 0);
+ if (rc)
+ goto hw_stats_alloc_fail;
+ bus_dmamap_sync(softc->rx_stats.idi_tag, softc->rx_stats.idi_map,
+ BUS_DMASYNC_PREREAD);
+
+ for (i = 0; i < nrxqsets; i++) {
+ /* Allocation the completion ring */
+ softc->rx_cp_rings[i].stats_ctx_id = HWRM_NA_SIGNATURE;
+ softc->rx_cp_rings[i].ring.phys_id =
+ (uint16_t)HWRM_NA_SIGNATURE;
+ softc->rx_cp_rings[i].ring.softc = softc;
+ softc->rx_cp_rings[i].ring.id = i + 1;
+ softc->rx_cp_rings[i].ring.doorbell =
+ softc->rx_cp_rings[i].ring.id * 0x80;
+ /*
+ * If this ring overflows, RX stops working.
+ */
+ softc->rx_cp_rings[i].ring.ring_size =
+ softc->scctx->isc_nrxd[0];
+ softc->rx_cp_rings[i].ring.vaddr = vaddrs[i * nrxqs];
+ softc->rx_cp_rings[i].ring.paddr = paddrs[i * nrxqs];
+
+ /* Allocate the RX ring */
+ softc->rx_rings[i].phys_id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->rx_rings[i].softc = softc;
+ softc->rx_rings[i].id = i + 1;
+ softc->rx_rings[i].doorbell = softc->rx_rings[i].id * 0x80;
+ softc->rx_rings[i].ring_size = softc->scctx->isc_nrxd[1];
+ softc->rx_rings[i].vaddr = vaddrs[i * nrxqs + 1];
+ softc->rx_rings[i].paddr = paddrs[i * nrxqs + 1];
+
+ /* Allocate the AG ring */
+ softc->ag_rings[i].phys_id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->ag_rings[i].softc = softc;
+ softc->ag_rings[i].id = nrxqsets + i + 1;
+ softc->ag_rings[i].doorbell = softc->ag_rings[i].id * 0x80;
+ softc->ag_rings[i].ring_size = softc->scctx->isc_nrxd[2];
+ softc->ag_rings[i].vaddr = vaddrs[i * nrxqs + 2];
+ softc->ag_rings[i].paddr = paddrs[i * nrxqs + 2];
+
+ /* Allocate the ring group */
+ softc->grp_info[i].grp_id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->grp_info[i].stats_ctx =
+ softc->rx_cp_rings[i].stats_ctx_id;
+ softc->grp_info[i].rx_ring_id = softc->rx_rings[i].phys_id;
+ softc->grp_info[i].ag_ring_id = softc->ag_rings[i].phys_id;
+ softc->grp_info[i].cp_ring_id =
+ softc->rx_cp_rings[i].ring.phys_id;
+
+ bnxt_create_rx_sysctls(softc, i);
+ }
+
+ /* And finally, the VNIC */
+ softc->vnic_info.id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->vnic_info.flow_id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->vnic_info.filter_id = -1;
+ softc->vnic_info.def_ring_grp = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->vnic_info.cos_rule = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->vnic_info.lb_rule = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->vnic_info.rx_mask = HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST;
+ softc->vnic_info.mc_list_count = 0;
+ softc->vnic_info.flags = BNXT_VNIC_FLAG_DEFAULT;
+ rc = iflib_dma_alloc(ctx, BNXT_MAX_MC_ADDRS * ETHER_ADDR_LEN,
+ &softc->vnic_info.mc_list, 0);
+ if (rc)
+ goto mc_list_alloc_fail;
+
+ /* The VNIC RSS Hash Key */
+ rc = iflib_dma_alloc(ctx, HW_HASH_KEY_SIZE,
+ &softc->vnic_info.rss_hash_key_tbl, 0);
+ if (rc)
+ goto rss_hash_alloc_fail;
+ bus_dmamap_sync(softc->vnic_info.rss_hash_key_tbl.idi_tag,
+ softc->vnic_info.rss_hash_key_tbl.idi_map,
+ BUS_DMASYNC_PREWRITE);
+ memcpy(softc->vnic_info.rss_hash_key_tbl.idi_vaddr,
+ softc->vnic_info.rss_hash_key, HW_HASH_KEY_SIZE);
+
+ /* Allocate the RSS tables */
+ rc = iflib_dma_alloc(ctx, HW_HASH_INDEX_SIZE * sizeof(uint16_t),
+ &softc->vnic_info.rss_grp_tbl, 0);
+ if (rc)
+ goto rss_grp_alloc_fail;
+ bus_dmamap_sync(softc->vnic_info.rss_grp_tbl.idi_tag,
+ softc->vnic_info.rss_grp_tbl.idi_map,
+ BUS_DMASYNC_PREWRITE);
+ memset(softc->vnic_info.rss_grp_tbl.idi_vaddr, 0xff,
+ softc->vnic_info.rss_grp_tbl.idi_size);
+
+ softc->nrxqsets = nrxqsets;
+ return rc;
+
+rss_grp_alloc_fail:
+ iflib_dma_free(&softc->vnic_info.rss_hash_key_tbl);
+rss_hash_alloc_fail:
+ iflib_dma_free(&softc->vnic_info.mc_list);
+mc_list_alloc_fail:
+ iflib_dma_free(&softc->rx_stats);
+hw_stats_alloc_fail:
+ free(softc->grp_info, M_DEVBUF);
+grp_alloc_fail:
+ free(softc->ag_rings, M_DEVBUF);
+ag_alloc_fail:
+ free(softc->rx_rings, M_DEVBUF);
+ring_alloc_fail:
+ free(softc->rx_cp_rings, M_DEVBUF);
+cp_alloc_fail:
+ return rc;
+}
+
+/* Device setup and teardown */
+static int
+bnxt_attach_pre(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ if_softc_ctx_t scctx;
+ int rc = 0;
+
+ softc->ctx = ctx;
+ softc->dev = iflib_get_dev(ctx);
+ softc->media = iflib_get_media(ctx);
+ softc->scctx = iflib_get_softc_ctx(ctx);
+ softc->sctx = iflib_get_sctx(ctx);
+ scctx = softc->scctx;
+
+ switch (softc->sctx->isc_vendor_info->pvi_device_id) {
+ case BCM57402_NPAR:
+ case BCM57404_NPAR:
+ case BCM57406_NPAR:
+ softc->flags |= BNXT_FLAG_NPAR;
+ break;
+ case BCM57304_VF:
+ case BCM57404_VF:
+ softc->flags |= BNXT_FLAG_VF;
+ break;
+ }
+
+ pci_enable_busmaster(softc->dev);
+
+ if (bnxt_pci_mapping(softc))
+ return (ENXIO);
+
+ /* HWRM setup/init */
+ BNXT_HWRM_LOCK_INIT(softc, device_get_nameunit(softc->dev));
+ rc = bnxt_alloc_hwrm_dma_mem(softc);
+ if (rc)
+ goto dma_fail;
+
+ /* Allocate the TPA start buffer */
+ softc->tpa_start = malloc(sizeof(struct bnxt_full_tpa_start) *
+ (RX_TPA_START_CMPL_AGG_ID_MASK >> RX_TPA_START_CMPL_AGG_ID_SFT),
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (softc->tpa_start == NULL) {
+ rc = ENOMEM;
+ device_printf(softc->dev,
+ "Unable to allocate space for TPA\n");
+ goto tpa_failed;
+ }
+
+ /* Get firmware version and compare with driver */
+ softc->ver_info = malloc(sizeof(struct bnxt_ver_info),
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (softc->ver_info == NULL) {
+ rc = ENOMEM;
+ device_printf(softc->dev,
+ "Unable to allocate space for version info\n");
+ goto ver_alloc_fail;
+ }
+ /* Default minimum required HWRM version */
+ softc->ver_info->hwrm_min_major = 1;
+ softc->ver_info->hwrm_min_minor = 2;
+ softc->ver_info->hwrm_min_update = 2;
+
+ rc = bnxt_hwrm_ver_get(softc);
+ if (rc) {
+ device_printf(softc->dev, "attach: hwrm ver get failed\n");
+ goto ver_fail;
+ }
+
+ /* Get NVRAM info */
+ softc->nvm_info = malloc(sizeof(struct bnxt_nvram_info),
+ M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (softc->nvm_info == NULL) {
+ rc = ENOMEM;
+ device_printf(softc->dev,
+ "Unable to allocate space for NVRAM info\n");
+ goto nvm_alloc_fail;
+ }
+ rc = bnxt_hwrm_nvm_get_dev_info(softc, &softc->nvm_info->mfg_id,
+ &softc->nvm_info->device_id, &softc->nvm_info->sector_size,
+ &softc->nvm_info->size, &softc->nvm_info->reserved_size,
+ &softc->nvm_info->available_size);
+
+ /* Register the driver with the FW */
+ rc = bnxt_hwrm_func_drv_rgtr(softc);
+ if (rc) {
+ device_printf(softc->dev, "attach: hwrm drv rgtr failed\n");
+ goto drv_rgtr_fail;
+ }
+
+ /* Get the HW capabilities */
+ rc = bnxt_hwrm_func_qcaps(softc);
+ if (rc)
+ goto failed;
+ iflib_set_mac(ctx, softc->func.mac_addr);
+
+ /* Get the queue config */
+ rc = bnxt_hwrm_queue_qportcfg(softc);
+ if (rc) {
+ device_printf(softc->dev, "attach: hwrm qportcfg failed\n");
+ goto failed;
+ }
+
+ /* Now perform a function reset */
+ rc = bnxt_hwrm_func_reset(softc);
+ bnxt_clear_ids(softc);
+ if (rc)
+ goto failed;
+
+ /* Now set up iflib sc */
+ scctx->isc_tx_nsegments = 31,
+ scctx->isc_tx_tso_segments_max = 31;
+ scctx->isc_tx_tso_size_max = BNXT_TSO_SIZE;
+ scctx->isc_tx_tso_segsize_max = BNXT_TSO_SIZE;
+ scctx->isc_vectors = softc->func.max_cp_rings;
+ if (scctx->isc_nrxd[0] <
+ ((scctx->isc_nrxd[1] * 4) + scctx->isc_nrxd[2]))
+ device_printf(softc->dev,
+ "WARNING: nrxd0 (%d) should be at least 4 * nrxd1 (%d) + nrxd2 (%d). Driver may be unstable\n",
+ scctx->isc_nrxd[0], scctx->isc_nrxd[1], scctx->isc_nrxd[2]);
+ if (scctx->isc_ntxd[0] < scctx->isc_ntxd[1] * 2)
+ device_printf(softc->dev,
+ "WARNING: ntxd0 (%d) should be at least 2 * ntxd1 (%d). Driver may be unstable\n",
+ scctx->isc_ntxd[0], scctx->isc_ntxd[1]);
+ scctx->isc_txqsizes[0] = sizeof(struct cmpl_base) * scctx->isc_ntxd[0];
+ scctx->isc_txqsizes[1] = sizeof(struct tx_bd_short) *
+ scctx->isc_ntxd[1];
+ scctx->isc_rxqsizes[0] = sizeof(struct cmpl_base) * scctx->isc_nrxd[0];
+ scctx->isc_rxqsizes[1] = sizeof(struct rx_prod_pkt_bd) *
+ scctx->isc_nrxd[1];
+ scctx->isc_rxqsizes[2] = sizeof(struct rx_prod_pkt_bd) *
+ scctx->isc_nrxd[2];
+ scctx->isc_max_rxqsets = min(pci_msix_count(softc->dev)-1,
+ softc->func.max_cp_rings - 1);
+ scctx->isc_max_rxqsets = min(scctx->isc_max_rxqsets,
+ softc->func.max_rx_rings);
+ scctx->isc_max_txqsets = min(softc->func.max_rx_rings,
+ softc->func.max_cp_rings - scctx->isc_max_rxqsets - 1);
+ scctx->isc_rss_table_size = HW_HASH_INDEX_SIZE;
+ scctx->isc_rss_table_mask = scctx->isc_rss_table_size - 1;
+
+ /* iflib will map and release this bar */
+ scctx->isc_msix_bar = pci_msix_table_bar(softc->dev);
+
+ /* Allocate the default completion ring */
+ softc->def_cp_ring.stats_ctx_id = HWRM_NA_SIGNATURE;
+ softc->def_cp_ring.ring.phys_id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->def_cp_ring.ring.softc = softc;
+ softc->def_cp_ring.ring.id = 0;
+ softc->def_cp_ring.ring.doorbell = softc->def_cp_ring.ring.id * 0x80;
+ softc->def_cp_ring.ring.ring_size = PAGE_SIZE /
+ sizeof(struct cmpl_base);
+ rc = iflib_dma_alloc(ctx,
+ sizeof(struct cmpl_base) * softc->def_cp_ring.ring.ring_size,
+ &softc->def_cp_ring_mem, 0);
+ softc->def_cp_ring.ring.vaddr = softc->def_cp_ring_mem.idi_vaddr;
+ softc->def_cp_ring.ring.paddr = softc->def_cp_ring_mem.idi_paddr;
+ iflib_config_gtask_init(ctx, &softc->def_cp_task, bnxt_def_cp_task,
+ "dflt_cp");
+
+ rc = bnxt_init_sysctl_ctx(softc);
+ if (rc)
+ goto init_sysctl_failed;
+ rc = bnxt_create_nvram_sysctls(softc->nvm_info);
+ if (rc)
+ goto failed;
+
+ arc4rand(softc->vnic_info.rss_hash_key, HW_HASH_KEY_SIZE, 0);
+ softc->vnic_info.rss_hash_type =
+ HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 |
+ HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 |
+ HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 |
+ HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 |
+ HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 |
+ HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6;
+ rc = bnxt_create_config_sysctls_pre(softc);
+ if (rc)
+ goto failed;
+
+ /* Initialize the vlan list */
+ SLIST_INIT(&softc->vnic_info.vlan_tags);
+ softc->vnic_info.vlan_tag_list.idi_vaddr = NULL;
+
+ return (rc);
+
+failed:
+ bnxt_free_sysctl_ctx(softc);
+init_sysctl_failed:
+ bnxt_hwrm_func_drv_unrgtr(softc, false);
+drv_rgtr_fail:
+ free(softc->nvm_info, M_DEVBUF);
+nvm_alloc_fail:
+ver_fail:
+ free(softc->ver_info, M_DEVBUF);
+ver_alloc_fail:
+ free(softc->tpa_start, M_DEVBUF);
+tpa_failed:
+ bnxt_free_hwrm_dma_mem(softc);
+dma_fail:
+ BNXT_HWRM_LOCK_DESTROY(softc);
+ bnxt_pci_mapping_free(softc);
+ pci_disable_busmaster(softc->dev);
+ return (rc);
+}
+
+static int
+bnxt_attach_post(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ if_t ifp = iflib_get_ifp(ctx);
+ int capabilities, enabling;
+ int rc;
+
+ bnxt_create_config_sysctls_post(softc);
+
+ /* Update link state etc... */
+ rc = bnxt_probe_phy(softc);
+ if (rc)
+ goto failed;
+
+ /* Needs to be done after probing the phy */
+ bnxt_create_ver_sysctls(softc);
+ bnxt_add_media_types(softc);
+ ifmedia_set(softc->media, IFM_ETHER | IFM_AUTO);
+
+ if_sethwassist(ifp, (CSUM_TCP | CSUM_UDP | CSUM_TCP_IPV6 |
+ CSUM_UDP_IPV6 | CSUM_TSO));
+
+ capabilities =
+ /* These are translated to hwassit bits */
+ IFCAP_TXCSUM | IFCAP_TXCSUM_IPV6 | IFCAP_TSO4 | IFCAP_TSO6 |
+ /* These are checked by iflib */
+ IFCAP_LRO | IFCAP_VLAN_HWFILTER |
+ /* These are part of the iflib mask */
+ IFCAP_RXCSUM | IFCAP_RXCSUM_IPV6 | IFCAP_VLAN_MTU |
+ IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_HWTSO |
+ /* These likely get lost... */
+ IFCAP_VLAN_HWCSUM | IFCAP_JUMBO_MTU;
+
+ if_setcapabilities(ifp, capabilities);
+
+ enabling = capabilities;
+
+ if_setcapenable(ifp, enabling);
+
+ softc->scctx->isc_max_frame_size = ifp->if_mtu + ETHER_HDR_LEN +
+ ETHER_CRC_LEN;
+
+failed:
+ return rc;
+}
+
+static int
+bnxt_detach(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ struct bnxt_vlan_tag *tag;
+ struct bnxt_vlan_tag *tmp;
+ int i;
+
+ bnxt_do_disable_intr(&softc->def_cp_ring);
+ bnxt_free_sysctl_ctx(softc);
+ bnxt_hwrm_func_reset(softc);
+ bnxt_clear_ids(softc);
+ iflib_irq_free(ctx, &softc->def_cp_ring.irq);
+ iflib_config_gtask_deinit(&softc->def_cp_task);
+ /* We need to free() these here... */
+ for (i = softc->nrxqsets-1; i>=0; i--) {
+ iflib_irq_free(ctx, &softc->rx_cp_rings[i].irq);
+ }
+ iflib_dma_free(&softc->vnic_info.mc_list);
+ iflib_dma_free(&softc->vnic_info.rss_hash_key_tbl);
+ iflib_dma_free(&softc->vnic_info.rss_grp_tbl);
+ if (softc->vnic_info.vlan_tag_list.idi_vaddr)
+ iflib_dma_free(&softc->vnic_info.vlan_tag_list);
+ SLIST_FOREACH_SAFE(tag, &softc->vnic_info.vlan_tags, next, tmp)
+ free(tag, M_DEVBUF);
+ iflib_dma_free(&softc->def_cp_ring_mem);
+ free(softc->tpa_start, M_DEVBUF);
+ free(softc->ver_info, M_DEVBUF);
+ free(softc->nvm_info, M_DEVBUF);
+
+ bnxt_hwrm_func_drv_unrgtr(softc, false);
+ bnxt_free_hwrm_dma_mem(softc);
+ BNXT_HWRM_LOCK_DESTROY(softc);
+
+ pci_disable_busmaster(softc->dev);
+ bnxt_pci_mapping_free(softc);
+
+ return 0;
+}
+
+/* Device configuration */
+static void
+bnxt_init(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ int i, j;
+ int rc;
+
+ rc = bnxt_hwrm_func_reset(softc);
+ if (rc)
+ return;
+ bnxt_clear_ids(softc);
+
+ /* Allocate the default completion ring */
+ softc->def_cp_ring.cons = UINT32_MAX;
+ softc->def_cp_ring.v_bit = 1;
+ bnxt_mark_cpr_invalid(&softc->def_cp_ring);
+ rc = bnxt_hwrm_ring_alloc(softc,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL,
+ &softc->def_cp_ring.ring,
+ (uint16_t)HWRM_NA_SIGNATURE,
+ HWRM_NA_SIGNATURE, true);
+ if (rc)
+ goto fail;
+
+ /* And now set the default CP ring as the async CP ring */
+ rc = bnxt_hwrm_func_cfg(softc);
+ if (rc)
+ goto fail;
+
+ for (i = 0; i < softc->nrxqsets; i++) {
+ /* Allocate the statistics context */
+ rc = bnxt_hwrm_stat_ctx_alloc(softc, &softc->rx_cp_rings[i],
+ softc->rx_stats.idi_paddr +
+ (sizeof(struct ctx_hw_stats) * i));
+ if (rc)
+ goto fail;
+
+ /* Allocate the completion ring */
+ softc->rx_cp_rings[i].cons = UINT32_MAX;
+ softc->rx_cp_rings[i].v_bit = 1;
+ softc->rx_cp_rings[i].last_idx = UINT32_MAX;
+ bnxt_mark_cpr_invalid(&softc->rx_cp_rings[i]);
+ rc = bnxt_hwrm_ring_alloc(softc,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL,
+ &softc->rx_cp_rings[i].ring, (uint16_t)HWRM_NA_SIGNATURE,
+ HWRM_NA_SIGNATURE, true);
+ if (rc)
+ goto fail;
+
+ /* Allocate the RX ring */
+ rc = bnxt_hwrm_ring_alloc(softc,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_RX,
+ &softc->rx_rings[i], (uint16_t)HWRM_NA_SIGNATURE,
+ HWRM_NA_SIGNATURE, false);
+ if (rc)
+ goto fail;
+ BNXT_RX_DB(&softc->rx_rings[i], 0);
+ /* TODO: Cumulus+ doesn't need the double doorbell */
+ BNXT_RX_DB(&softc->rx_rings[i], 0);
+
+ /* Allocate the AG ring */
+ rc = bnxt_hwrm_ring_alloc(softc,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_RX,
+ &softc->ag_rings[i], (uint16_t)HWRM_NA_SIGNATURE,
+ HWRM_NA_SIGNATURE, false);
+ if (rc)
+ goto fail;
+ BNXT_RX_DB(&softc->rx_rings[i], 0);
+ /* TODO: Cumulus+ doesn't need the double doorbell */
+ BNXT_RX_DB(&softc->ag_rings[i], 0);
+
+ /* Allocate the ring group */
+ softc->grp_info[i].stats_ctx =
+ softc->rx_cp_rings[i].stats_ctx_id;
+ softc->grp_info[i].rx_ring_id = softc->rx_rings[i].phys_id;
+ softc->grp_info[i].ag_ring_id = softc->ag_rings[i].phys_id;
+ softc->grp_info[i].cp_ring_id =
+ softc->rx_cp_rings[i].ring.phys_id;
+ rc = bnxt_hwrm_ring_grp_alloc(softc, &softc->grp_info[i]);
+ if (rc)
+ goto fail;
+
+ }
+
+ /* Allocate the VNIC RSS context */
+ rc = bnxt_hwrm_vnic_ctx_alloc(softc, &softc->vnic_info.rss_id);
+ if (rc)
+ goto fail;
+
+ /* Allocate the vnic */
+ softc->vnic_info.def_ring_grp = softc->grp_info[0].grp_id;
+ softc->vnic_info.mru = softc->scctx->isc_max_frame_size;
+ rc = bnxt_hwrm_vnic_alloc(softc, &softc->vnic_info);
+ if (rc)
+ goto fail;
+ rc = bnxt_hwrm_vnic_cfg(softc, &softc->vnic_info);
+ if (rc)
+ goto fail;
+ rc = bnxt_hwrm_set_filter(softc, &softc->vnic_info);
+ if (rc)
+ goto fail;
+
+ /* Enable RSS on the VNICs */
+ for (i = 0, j = 0; i < HW_HASH_INDEX_SIZE; i++) {
+ ((uint16_t *)
+ softc->vnic_info.rss_grp_tbl.idi_vaddr)[i] =
+ htole16(softc->grp_info[j].grp_id);
+ if (++j == softc->nrxqsets)
+ j = 0;
+ }
+
+ rc = bnxt_hwrm_rss_cfg(softc, &softc->vnic_info,
+ softc->vnic_info.rss_hash_type);
+ if (rc)
+ goto fail;
+
+#ifdef notyet
+ /* Enable LRO/TPA/GRO */
+ rc = bnxt_hwrm_vnic_tpa_cfg(softc, &softc->vnic_info,
+ (if_getcapenable(iflib_get_ifp(ctx)) & IFCAP_LRO) ?
+ HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA : 0);
+ if (rc)
+ goto fail;
+#endif
+
+ for (i = 0; i < softc->ntxqsets; i++) {
+ /* Allocate the statistics context */
+ rc = bnxt_hwrm_stat_ctx_alloc(softc, &softc->tx_cp_rings[i],
+ softc->tx_stats.idi_paddr +
+ (sizeof(struct ctx_hw_stats) * i));
+ if (rc)
+ goto fail;
+
+ /* Allocate the completion ring */
+ softc->tx_cp_rings[i].cons = UINT32_MAX;
+ softc->tx_cp_rings[i].v_bit = 1;
+ bnxt_mark_cpr_invalid(&softc->tx_cp_rings[i]);
+ rc = bnxt_hwrm_ring_alloc(softc,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL,
+ &softc->tx_cp_rings[i].ring, (uint16_t)HWRM_NA_SIGNATURE,
+ HWRM_NA_SIGNATURE, false);
+ if (rc)
+ goto fail;
+
+ /* Allocate the TX ring */
+ rc = bnxt_hwrm_ring_alloc(softc,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_TX,
+ &softc->tx_rings[i], softc->tx_cp_rings[i].ring.phys_id,
+ softc->tx_cp_rings[i].stats_ctx_id, false);
+ if (rc)
+ goto fail;
+ BNXT_TX_DB(&softc->tx_rings[i], 0);
+ /* TODO: Cumulus+ doesn't need the double doorbell */
+ BNXT_TX_DB(&softc->tx_rings[i], 0);
+ }
+
+ bnxt_do_enable_intr(&softc->def_cp_ring);
+ return;
+
+fail:
+ bnxt_hwrm_func_reset(softc);
+ bnxt_clear_ids(softc);
+ return;
+}
+
+static void
+bnxt_stop(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+
+ bnxt_do_disable_intr(&softc->def_cp_ring);
+ bnxt_hwrm_func_reset(softc);
+ bnxt_clear_ids(softc);
+ return;
+}
+
+static void
+bnxt_multi_set(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ if_t ifp = iflib_get_ifp(ctx);
+ uint8_t *mta;
+ int cnt, mcnt;
+
+ mcnt = if_multiaddr_count(ifp, -1);
+
+ if (mcnt > BNXT_MAX_MC_ADDRS) {
+ softc->vnic_info.rx_mask |=
+ HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST;
+ bnxt_hwrm_cfa_l2_set_rx_mask(softc, &softc->vnic_info);
+ }
+ else {
+ softc->vnic_info.rx_mask &=
+ ~HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST;
+ mta = softc->vnic_info.mc_list.idi_vaddr;
+ bzero(mta, softc->vnic_info.mc_list.idi_size);
+ if_multiaddr_array(ifp, mta, &cnt, mcnt);
+ bus_dmamap_sync(softc->vnic_info.mc_list.idi_tag,
+ softc->vnic_info.mc_list.idi_map, BUS_DMASYNC_PREWRITE);
+ softc->vnic_info.mc_list_count = cnt;
+ softc->vnic_info.rx_mask |=
+ HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST;
+ if (bnxt_hwrm_cfa_l2_set_rx_mask(softc, &softc->vnic_info))
+ device_printf(softc->dev,
+ "set_multi: rx_mask set failed\n");
+ }
+}
+
+static int
+bnxt_mtu_set(if_ctx_t ctx, uint32_t mtu)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+
+ if (mtu > BNXT_MAX_MTU)
+ return EINVAL;
+
+ softc->scctx->isc_max_frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+ return 0;
+}
+
+static void
+bnxt_media_status(if_ctx_t ctx, struct ifmediareq * ifmr)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ struct bnxt_link_info *link_info = &softc->link_info;
+ uint8_t phy_type = get_phy_type(softc);
+
+ bnxt_update_link(softc, true);
+
+ ifmr->ifm_status = IFM_AVALID;
+ ifmr->ifm_active = IFM_ETHER;
+
+ if (link_info->link_up)
+ ifmr->ifm_status |= IFM_ACTIVE;
+ else
+ ifmr->ifm_status &= ~IFM_ACTIVE;
+
+ if (link_info->duplex == HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_FULL)
+ ifmr->ifm_active |= IFM_FDX;
+ else
+ ifmr->ifm_active |= IFM_HDX;
+
+ switch (link_info->link_speed) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB:
+ ifmr->ifm_active |= IFM_100_T;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB:
+ switch (phy_type) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX:
+ ifmr->ifm_active |= IFM_1000_KX;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET:
+ ifmr->ifm_active |= IFM_1000_T;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY:
+ ifmr->ifm_active |= IFM_1000_SGMII;
+ break;
+ default:
+ ifmr->ifm_active |= IFM_UNKNOWN;
+ break;
+ }
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB:
+ switch (phy_type) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX:
+ ifmr->ifm_active |= IFM_2500_KX;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET:
+ ifmr->ifm_active |= IFM_2500_T;
+ break;
+ default:
+ ifmr->ifm_active |= IFM_UNKNOWN;
+ break;
+ }
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB:
+ switch (phy_type) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR:
+ ifmr->ifm_active |= IFM_10G_CR1;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR:
+ ifmr->ifm_active |= IFM_10G_KR;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR:
+ ifmr->ifm_active |= IFM_10G_LR;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR:
+ ifmr->ifm_active |= IFM_10G_SR;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX:
+ ifmr->ifm_active |= IFM_10G_KX4;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET:
+ ifmr->ifm_active |= IFM_10G_T;
+ break;
+ default:
+ ifmr->ifm_active |= IFM_UNKNOWN;
+ break;
+ }
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB:
+ ifmr->ifm_active |= IFM_20G_KR2;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB:
+ switch (phy_type) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR:
+ ifmr->ifm_active |= IFM_25G_CR;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR:
+ ifmr->ifm_active |= IFM_25G_KR;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR:
+ ifmr->ifm_active |= IFM_25G_SR;
+ break;
+ default:
+ ifmr->ifm_active |= IFM_UNKNOWN;
+ break;
+ }
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB:
+ switch (phy_type) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR:
+ ifmr->ifm_active |= IFM_40G_CR4;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR:
+ ifmr->ifm_active |= IFM_40G_KR4;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR:
+ ifmr->ifm_active |= IFM_40G_LR4;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR:
+ ifmr->ifm_active |= IFM_40G_SR4;
+ break;
+ default:
+ ifmr->ifm_active |= IFM_UNKNOWN;
+ break;
+ }
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB:
+ switch (phy_type) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR:
+ ifmr->ifm_active |= IFM_50G_CR2;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR:
+ ifmr->ifm_active |= IFM_50G_KR2;
+ break;
+ default:
+ ifmr->ifm_active |= IFM_UNKNOWN;
+ break;
+ }
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB:
+ switch (phy_type) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR:
+ ifmr->ifm_active |= IFM_100G_CR4;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR:
+ ifmr->ifm_active |= IFM_100G_KR4;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR:
+ ifmr->ifm_active |= IFM_100G_LR4;
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR:
+ ifmr->ifm_active |= IFM_100G_SR4;
+ break;
+ default:
+ ifmr->ifm_active |= IFM_UNKNOWN;
+ break;
+ }
+ default:
+ return;
+ }
+
+ if (link_info->pause == (HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX |
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX))
+ ifmr->ifm_active |= (IFM_ETH_RXPAUSE | IFM_ETH_TXPAUSE);
+ else if (link_info->pause == HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX)
+ ifmr->ifm_active |= IFM_ETH_TXPAUSE;
+ else if (link_info->pause == HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX)
+ ifmr->ifm_active |= IFM_ETH_RXPAUSE;
+
+ bnxt_report_link(softc);
+ return;
+}
+
+static int
+bnxt_media_change(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ struct ifmedia *ifm = iflib_get_media(ctx);
+ struct ifmediareq ifmr;
+ int rc;
+
+ if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
+ return EINVAL;
+
+ switch (IFM_SUBTYPE(ifm->ifm_media)) {
+ case IFM_100_T:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB;
+ break;
+ case IFM_1000_KX:
+ case IFM_1000_T:
+ case IFM_1000_SGMII:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB;
+ break;
+ case IFM_2500_KX:
+ case IFM_2500_T:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB;
+ break;
+ case IFM_10G_CR1:
+ case IFM_10G_KR:
+ case IFM_10G_LR:
+ case IFM_10G_SR:
+ case IFM_10G_T:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB;
+ break;
+ case IFM_20G_KR2:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB;
+ break;
+ case IFM_25G_CR:
+ case IFM_25G_KR:
+ case IFM_25G_SR:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB;
+ break;
+ case IFM_40G_CR4:
+ case IFM_40G_KR4:
+ case IFM_40G_LR4:
+ case IFM_40G_SR4:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB;
+ break;
+ case IFM_50G_CR2:
+ case IFM_50G_KR2:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB;
+ break;
+ case IFM_100G_CR4:
+ case IFM_100G_KR4:
+ case IFM_100G_LR4:
+ case IFM_100G_SR4:
+ softc->link_info.autoneg &= ~BNXT_AUTONEG_SPEED;
+ softc->link_info.req_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB;
+ break;
+ default:
+ device_printf(softc->dev,
+ "Unsupported media type! Using auto\n");
+ /* Fall-through */
+ case IFM_AUTO:
+ // Auto
+ softc->link_info.autoneg |= BNXT_AUTONEG_SPEED;
+ break;
+ }
+ rc = bnxt_hwrm_set_link_setting(softc, true, true);
+ bnxt_media_status(softc->ctx, &ifmr);
+ return rc;
+}
+
+static int
+bnxt_promisc_set(if_ctx_t ctx, int flags)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ if_t ifp = iflib_get_ifp(ctx);
+ int rc;
+
+ if (ifp->if_flags & IFF_ALLMULTI ||
+ if_multiaddr_count(ifp, -1) > BNXT_MAX_MC_ADDRS)
+ softc->vnic_info.rx_mask |=
+ HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST;
+ else
+ softc->vnic_info.rx_mask &=
+ ~HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST;
+
+ if (ifp->if_flags & IFF_PROMISC)
+ softc->vnic_info.rx_mask |=
+ HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS |
+ HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN;
+ else
+ softc->vnic_info.rx_mask &=
+ ~(HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS |
+ HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN);
+
+ rc = bnxt_hwrm_cfa_l2_set_rx_mask(softc, &softc->vnic_info);
+
+ return rc;
+}
+
+static uint64_t
+bnxt_get_counter(if_ctx_t ctx, ift_counter cnt)
+{
+ if_t ifp = iflib_get_ifp(ctx);
+
+ if (cnt < IFCOUNTERS)
+ return if_get_counter_default(ifp, cnt);
+
+ return 0;
+}
+
+static void
+bnxt_update_admin_status(if_ctx_t ctx)
+{
+ /* TODO: do we need to do anything here? */
+ return;
+}
+
+static void inline
+bnxt_do_enable_intr(struct bnxt_cp_ring *cpr)
+{
+ if (cpr->ring.phys_id != (uint16_t)HWRM_NA_SIGNATURE) {
+ /* First time enabling, do not set index */
+ if (cpr->cons == UINT32_MAX)
+ BNXT_CP_ENABLE_DB(&cpr->ring);
+ else
+ BNXT_CP_IDX_ENABLE_DB(&cpr->ring, cpr->cons);
+ }
+}
+
+static void inline
+bnxt_do_disable_intr(struct bnxt_cp_ring *cpr)
+{
+ if (cpr->ring.phys_id != (uint16_t)HWRM_NA_SIGNATURE)
+ BNXT_CP_DISABLE_DB(&cpr->ring);
+}
+
+/* Enable all interrupts */
+static void
+bnxt_intr_enable(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ int i;
+
+ bnxt_do_enable_intr(&softc->def_cp_ring);
+ for (i = 0; i < softc->nrxqsets; i++)
+ bnxt_do_enable_intr(&softc->rx_cp_rings[i]);
+
+ return;
+}
+
+/* Enable interrupt for a single queue */
+static int
+bnxt_queue_intr_enable(if_ctx_t ctx, uint16_t qid)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+
+ bnxt_do_enable_intr(&softc->rx_cp_rings[qid]);
+ return 0;
+}
+
+/* Disable all interrupts */
+static void
+bnxt_disable_intr(if_ctx_t ctx)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ int i;
+
+ /*
+ * NOTE: These TX interrupts should never get enabled, so don't
+ * update the index
+ */
+ for (i = 0; i < softc->ntxqsets; i++)
+ bnxt_do_disable_intr(&softc->tx_cp_rings[i]);
+ for (i = 0; i < softc->nrxqsets; i++)
+ bnxt_do_disable_intr(&softc->rx_cp_rings[i]);
+
+ return;
+}
+
+static int
+bnxt_msix_intr_assign(if_ctx_t ctx, int msix)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ int rc;
+ int i;
+
+ rc = iflib_irq_alloc_generic(ctx, &softc->def_cp_ring.irq,
+ softc->def_cp_ring.ring.id + 1, IFLIB_INTR_ADMIN,
+ bnxt_handle_def_cp, softc, 0, "def_cp");
+ if (rc) {
+ device_printf(iflib_get_dev(ctx),
+ "Failed to register default completion ring handler\n");
+ return rc;
+ }
+
+ for (i=0; i<softc->scctx->isc_nrxqsets; i++) {
+ rc = iflib_irq_alloc_generic(ctx, &softc->rx_cp_rings[i].irq,
+ softc->rx_cp_rings[i].ring.id + 1, IFLIB_INTR_RX,
+ bnxt_handle_rx_cp, &softc->rx_cp_rings[i], i, "rx_cp");
+ if (rc) {
+ device_printf(iflib_get_dev(ctx),
+ "Failed to register RX completion ring handler\n");
+ i--;
+ goto fail;
+ }
+ }
+
+ for (i=0; i<softc->scctx->isc_ntxqsets; i++)
+ iflib_softirq_alloc_generic(ctx, i + 1, IFLIB_INTR_TX, NULL, i,
+ "tx_cp");
+
+ return rc;
+
+fail:
+ for (; i>=0; i--)
+ iflib_irq_free(ctx, &softc->rx_cp_rings[i].irq);
+ iflib_irq_free(ctx, &softc->def_cp_ring.irq);
+ return rc;
+}
+
+/*
+ * We're explicitly allowing duplicates here. They will need to be
+ * removed as many times as they are added.
+ */
+static void
+bnxt_vlan_register(if_ctx_t ctx, uint16_t vtag)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ struct bnxt_vlan_tag *new_tag;
+
+ new_tag = malloc(sizeof(struct bnxt_vlan_tag), M_DEVBUF, M_NOWAIT);
+ if (new_tag == NULL)
+ return;
+ new_tag->tag = vtag;
+ new_tag->tpid = 8100;
+ SLIST_INSERT_HEAD(&softc->vnic_info.vlan_tags, new_tag, next);
+};
+
+static void
+bnxt_vlan_unregister(if_ctx_t ctx, uint16_t vtag)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ struct bnxt_vlan_tag *vlan_tag;
+
+ SLIST_FOREACH(vlan_tag, &softc->vnic_info.vlan_tags, next) {
+ if (vlan_tag->tag == vtag) {
+ SLIST_REMOVE(&softc->vnic_info.vlan_tags, vlan_tag,
+ bnxt_vlan_tag, next);
+ free(vlan_tag, M_DEVBUF);
+ break;
+ }
+ }
+}
+
+static int
+bnxt_priv_ioctl(if_ctx_t ctx, u_long command, caddr_t data)
+{
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ struct ifreq *ifr = (struct ifreq *)data;
+ struct ifreq_buffer *ifbuf = &ifr->ifr_ifru.ifru_buffer;
+ struct bnxt_ioctl_header *ioh =
+ (struct bnxt_ioctl_header *)(ifbuf->buffer);
+ int rc = ENOTSUP;
+ struct bnxt_ioctl_data *iod = NULL;
+
+ switch (command) {
+ case SIOCGPRIVATE_0:
+ if ((rc = priv_check(curthread, PRIV_DRIVER)) != 0)
+ goto exit;
+
+ iod = malloc(ifbuf->length, M_DEVBUF, M_NOWAIT | M_ZERO);
+ if (!iod) {
+ rc = ENOMEM;
+ goto exit;
+ }
+ copyin(ioh, iod, ifbuf->length);
+
+ switch (ioh->type) {
+ case BNXT_HWRM_NVM_FIND_DIR_ENTRY:
+ {
+ struct bnxt_ioctl_hwrm_nvm_find_dir_entry *find =
+ &iod->find;
+
+ rc = bnxt_hwrm_nvm_find_dir_entry(softc, find->type,
+ &find->ordinal, find->ext, &find->index,
+ find->use_index, find->search_opt,
+ &find->data_length, &find->item_length,
+ &find->fw_ver);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_NVM_READ:
+ {
+ struct bnxt_ioctl_hwrm_nvm_read *rd = &iod->read;
+ struct iflib_dma_info dma_data;
+ size_t offset;
+ size_t remain;
+ size_t csize;
+
+ /*
+ * Some HWRM versions can't read more than 0x8000 bytes
+ */
+ rc = iflib_dma_alloc(softc->ctx,
+ min(rd->length, 0x8000), &dma_data, BUS_DMA_NOWAIT);
+ if (rc)
+ break;
+ for (remain = rd->length, offset = 0;
+ remain && offset < rd->length; offset += 0x8000) {
+ csize = min(remain, 0x8000);
+ rc = bnxt_hwrm_nvm_read(softc, rd->index,
+ rd->offset + offset, csize, &dma_data);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ break;
+ }
+ else {
+ copyout(dma_data.idi_vaddr,
+ rd->data + offset, csize);
+ iod->hdr.rc = 0;
+ }
+ remain -= csize;
+ }
+ if (iod->hdr.rc == 0)
+ copyout(iod, ioh, ifbuf->length);
+
+ iflib_dma_free(&dma_data);
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_FW_RESET:
+ {
+ struct bnxt_ioctl_hwrm_fw_reset *rst =
+ &iod->reset;
+
+ rc = bnxt_hwrm_fw_reset(softc, rst->processor,
+ &rst->selfreset);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_FW_QSTATUS:
+ {
+ struct bnxt_ioctl_hwrm_fw_qstatus *qstat =
+ &iod->status;
+
+ rc = bnxt_hwrm_fw_qstatus(softc, qstat->processor,
+ &qstat->selfreset);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_NVM_WRITE:
+ {
+ struct bnxt_ioctl_hwrm_nvm_write *wr =
+ &iod->write;
+
+ rc = bnxt_hwrm_nvm_write(softc, wr->data, true,
+ wr->type, wr->ordinal, wr->ext, wr->attr,
+ wr->option, wr->data_length, wr->keep,
+ &wr->item_length, &wr->index);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_NVM_ERASE_DIR_ENTRY:
+ {
+ struct bnxt_ioctl_hwrm_nvm_erase_dir_entry *erase =
+ &iod->erase;
+
+ rc = bnxt_hwrm_nvm_erase_dir_entry(softc, erase->index);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_NVM_GET_DIR_INFO:
+ {
+ struct bnxt_ioctl_hwrm_nvm_get_dir_info *info =
+ &iod->dir_info;
+
+ rc = bnxt_hwrm_nvm_get_dir_info(softc, &info->entries,
+ &info->entry_length);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_NVM_GET_DIR_ENTRIES:
+ {
+ struct bnxt_ioctl_hwrm_nvm_get_dir_entries *get =
+ &iod->dir_entries;
+ struct iflib_dma_info dma_data;
+
+ rc = iflib_dma_alloc(softc->ctx, get->max_size,
+ &dma_data, BUS_DMA_NOWAIT);
+ if (rc)
+ break;
+ rc = bnxt_hwrm_nvm_get_dir_entries(softc, &get->entries,
+ &get->entry_length, &dma_data);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ copyout(dma_data.idi_vaddr, get->data,
+ get->entry_length * get->entries);
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+ iflib_dma_free(&dma_data);
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_NVM_VERIFY_UPDATE:
+ {
+ struct bnxt_ioctl_hwrm_nvm_verify_update *vrfy =
+ &iod->verify;
+
+ rc = bnxt_hwrm_nvm_verify_update(softc, vrfy->type,
+ vrfy->ordinal, vrfy->ext);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_NVM_INSTALL_UPDATE:
+ {
+ struct bnxt_ioctl_hwrm_nvm_install_update *inst =
+ &iod->install;
+
+ rc = bnxt_hwrm_nvm_install_update(softc,
+ inst->install_type, &inst->installed_items,
+ &inst->result, &inst->problem_item,
+ &inst->reset_required);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_NVM_MODIFY:
+ {
+ struct bnxt_ioctl_hwrm_nvm_modify *mod = &iod->modify;
+
+ rc = bnxt_hwrm_nvm_modify(softc, mod->index,
+ mod->offset, mod->data, true, mod->length);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_FW_GET_TIME:
+ {
+ struct bnxt_ioctl_hwrm_fw_get_time *gtm =
+ &iod->get_time;
+
+ rc = bnxt_hwrm_fw_get_time(softc, &gtm->year,
+ &gtm->month, &gtm->day, &gtm->hour, &gtm->minute,
+ &gtm->second, &gtm->millisecond, &gtm->zone);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ case BNXT_HWRM_FW_SET_TIME:
+ {
+ struct bnxt_ioctl_hwrm_fw_set_time *stm =
+ &iod->set_time;
+
+ rc = bnxt_hwrm_fw_set_time(softc, stm->year,
+ stm->month, stm->day, stm->hour, stm->minute,
+ stm->second, stm->millisecond, stm->zone);
+ if (rc) {
+ iod->hdr.rc = rc;
+ copyout(&iod->hdr.rc, &ioh->rc,
+ sizeof(ioh->rc));
+ }
+ else {
+ iod->hdr.rc = 0;
+ copyout(iod, ioh, ifbuf->length);
+ }
+
+ rc = 0;
+ goto exit;
+ }
+ }
+ break;
+ }
+
+exit:
+ if (iod)
+ free(iod, M_DEVBUF);
+ return rc;
+}
+
+/*
+ * Support functions
+ */
+static int
+bnxt_probe_phy(struct bnxt_softc *softc)
+{
+ struct bnxt_link_info *link_info = &softc->link_info;
+ int rc = 0;
+
+ rc = bnxt_update_link(softc, false);
+ if (rc) {
+ device_printf(softc->dev,
+ "Probe phy can't update link (rc: %x)\n", rc);
+ return (rc);
+ }
+
+ /*initialize the ethool setting copy with NVM settings */
+ if (link_info->auto_mode != HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE)
+ link_info->autoneg |= BNXT_AUTONEG_SPEED;
+
+ if (link_info->auto_pause & (HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX |
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX)) {
+ if (link_info->auto_pause == (
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX |
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX))
+ link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
+ link_info->req_flow_ctrl = link_info->auto_pause;
+ } else if (link_info->force_pause & (
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX |
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX)) {
+ link_info->req_flow_ctrl = link_info->force_pause;
+ }
+ link_info->req_duplex = link_info->duplex_setting;
+ if (link_info->autoneg & BNXT_AUTONEG_SPEED)
+ link_info->req_link_speed = link_info->auto_link_speed;
+ else
+ link_info->req_link_speed = link_info->force_link_speed;
+ return (rc);
+}
+
+static void
+bnxt_add_media_types(struct bnxt_softc *softc)
+{
+ struct bnxt_link_info *link_info = &softc->link_info;
+ uint16_t supported;
+ uint8_t phy_type = get_phy_type(softc);
+
+ supported = link_info->support_speeds;
+
+ /* Auto is always supported */
+ ifmedia_add(softc->media, IFM_ETHER | IFM_AUTO, 0, NULL);
+
+ if (softc->flags & BNXT_FLAG_NPAR)
+ return;
+
+ switch (phy_type) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR:
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_100G_CR4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_50G_CR2, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_40G_CR4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_25G_CR, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_10G_CR1, 0,
+ NULL);
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN:
+ /* Auto only */
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR:
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_100G_KR4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_50G_KR2, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_40G_KR4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_25G_KR, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_20G_KR2, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_10G_KR, 0,
+ NULL);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR:
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_100G_LR4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_40G_LR4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_10G_LR, 0,
+ NULL);
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR:
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_100G_SR4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_40G_SR4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_25G_SR, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_10G_SR, 0,
+ NULL);
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX:
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_10G_KX4, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_2500_KX, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_1000_KX, 0,
+ NULL);
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET:
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE:
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_10_T, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_100_T, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_1000_T, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_2500_T, 0,
+ NULL);
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_10G_T, 0,
+ NULL);
+ break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY:
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB)
+ ifmedia_add(softc->media, IFM_ETHER | IFM_1000_SGMII, 0,
+ NULL);
+ break;
+ }
+
+ return;
+}
+
+static int
+bnxt_map_bar(struct bnxt_softc *softc, struct bnxt_bar_info *bar, int bar_num, bool shareable)
+{
+ uint32_t flag;
+
+ if (bar->res != NULL) {
+ device_printf(softc->dev, "Bar %d already mapped\n", bar_num);
+ return EDOOFUS;
+ }
+
+ bar->rid = PCIR_BAR(bar_num);
+ flag = RF_ACTIVE;
+ if (shareable)
+ flag |= RF_SHAREABLE;
+
+ if ((bar->res =
+ bus_alloc_resource_any(softc->dev,
+ SYS_RES_MEMORY,
+ &bar->rid,
+ flag)) == NULL) {
+ device_printf(softc->dev,
+ "PCI BAR%d mapping failure\n", bar_num);
+ return (ENXIO);
+ }
+ bar->tag = rman_get_bustag(bar->res);
+ bar->handle = rman_get_bushandle(bar->res);
+ bar->size = rman_get_size(bar->res);
+
+ return 0;
+}
+
+static int
+bnxt_pci_mapping(struct bnxt_softc *softc)
+{
+ int rc;
+
+ rc = bnxt_map_bar(softc, &softc->hwrm_bar, 0, true);
+ if (rc)
+ return rc;
+
+ rc = bnxt_map_bar(softc, &softc->doorbell_bar, 2, false);
+
+ return rc;
+}
+
+static void
+bnxt_pci_mapping_free(struct bnxt_softc *softc)
+{
+ if (softc->hwrm_bar.res != NULL)
+ bus_release_resource(softc->dev, SYS_RES_MEMORY,
+ softc->hwrm_bar.rid, softc->hwrm_bar.res);
+ softc->hwrm_bar.res = NULL;
+
+ if (softc->doorbell_bar.res != NULL)
+ bus_release_resource(softc->dev, SYS_RES_MEMORY,
+ softc->doorbell_bar.rid, softc->doorbell_bar.res);
+ softc->doorbell_bar.res = NULL;
+}
+
+static int
+bnxt_update_link(struct bnxt_softc *softc, bool chng_link_state)
+{
+ struct bnxt_link_info *link_info = &softc->link_info;
+ uint8_t link_up = link_info->link_up;
+ int rc = 0;
+
+ rc = bnxt_hwrm_port_phy_qcfg(softc);
+ if (rc)
+ goto exit;
+
+ /* TODO: need to add more logic to report VF link */
+ if (chng_link_state) {
+ if (link_info->phy_link_status ==
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK)
+ link_info->link_up = 1;
+ else
+ link_info->link_up = 0;
+ if (link_up != link_info->link_up)
+ bnxt_report_link(softc);
+ } else {
+ /* always link down if not require to update link state */
+ link_info->link_up = 0;
+ }
+
+exit:
+ return rc;
+}
+
+void
+bnxt_report_link(struct bnxt_softc *softc)
+{
+ const char *duplex = NULL, *flow_ctrl = NULL;
+
+ if (softc->link_info.link_up == softc->link_info.last_link_up) {
+ if (!softc->link_info.link_up)
+ return;
+ if (softc->link_info.pause == softc->link_info.last_pause &&
+ softc->link_info.duplex == softc->link_info.last_duplex)
+ return;
+ }
+
+ if (softc->link_info.link_up) {
+ if (softc->link_info.duplex ==
+ HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_FULL)
+ duplex = "full duplex";
+ else
+ duplex = "half duplex";
+ if (softc->link_info.pause == (
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX |
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX))
+ flow_ctrl = "FC - receive & transmit";
+ else if (softc->link_info.pause ==
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX)
+ flow_ctrl = "FC - transmit";
+ else if (softc->link_info.pause ==
+ HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX)
+ flow_ctrl = "FC - receive";
+ else
+ flow_ctrl = "none";
+ iflib_link_state_change(softc->ctx, LINK_STATE_UP,
+ IF_Gbps(100));
+ device_printf(softc->dev, "Link is UP %s, %s\n", duplex,
+ flow_ctrl);
+ } else {
+ iflib_link_state_change(softc->ctx, LINK_STATE_DOWN,
+ bnxt_get_baudrate(&softc->link_info));
+ device_printf(softc->dev, "Link is Down\n");
+ }
+
+ softc->link_info.last_link_up = softc->link_info.link_up;
+ softc->link_info.last_pause = softc->link_info.pause;
+ softc->link_info.last_duplex = softc->link_info.duplex;
+}
+
+static int
+bnxt_handle_rx_cp(void *arg)
+{
+ struct bnxt_cp_ring *cpr = arg;
+
+ /* Disable further interrupts for this queue */
+ BNXT_CP_DISABLE_DB(&cpr->ring);
+ return FILTER_SCHEDULE_THREAD;
+}
+
+static int
+bnxt_handle_def_cp(void *arg)
+{
+ struct bnxt_softc *softc = arg;
+
+ BNXT_CP_DISABLE_DB(&softc->def_cp_ring.ring);
+ GROUPTASK_ENQUEUE(&softc->def_cp_task);
+ return FILTER_HANDLED;
+}
+
+static void
+bnxt_clear_ids(struct bnxt_softc *softc)
+{
+ int i;
+
+ softc->def_cp_ring.stats_ctx_id = HWRM_NA_SIGNATURE;
+ softc->def_cp_ring.ring.phys_id = (uint16_t)HWRM_NA_SIGNATURE;
+ for (i = 0; i < softc->ntxqsets; i++) {
+ softc->tx_cp_rings[i].stats_ctx_id = HWRM_NA_SIGNATURE;
+ softc->tx_cp_rings[i].ring.phys_id =
+ (uint16_t)HWRM_NA_SIGNATURE;
+ softc->tx_rings[i].phys_id = (uint16_t)HWRM_NA_SIGNATURE;
+ }
+ for (i = 0; i < softc->nrxqsets; i++) {
+ softc->rx_cp_rings[i].stats_ctx_id = HWRM_NA_SIGNATURE;
+ softc->rx_cp_rings[i].ring.phys_id =
+ (uint16_t)HWRM_NA_SIGNATURE;
+ softc->rx_rings[i].phys_id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->ag_rings[i].phys_id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->grp_info[i].grp_id = (uint16_t)HWRM_NA_SIGNATURE;
+ }
+ softc->vnic_info.filter_id = -1;
+ softc->vnic_info.id = (uint16_t)HWRM_NA_SIGNATURE;
+ softc->vnic_info.rss_id = (uint16_t)HWRM_NA_SIGNATURE;
+ memset(softc->vnic_info.rss_grp_tbl.idi_vaddr, 0xff,
+ softc->vnic_info.rss_grp_tbl.idi_size);
+}
+
+static void
+bnxt_mark_cpr_invalid(struct bnxt_cp_ring *cpr)
+{
+ struct cmpl_base *cmp = (void *)cpr->ring.vaddr;
+ int i;
+
+ for (i = 0; i < cpr->ring.ring_size; i++)
+ cmp[i].info3_v = !cpr->v_bit;
+}
+
+static void
+bnxt_handle_async_event(struct bnxt_softc *softc, struct cmpl_base *cmpl)
+{
+ struct hwrm_async_event_cmpl *ae = (void *)cmpl;
+ uint16_t async_id = le16toh(ae->event_id);
+ struct ifmediareq ifmr;
+
+ switch (async_id) {
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE:
+ bnxt_media_status(softc->ctx, &ifmr);
+ break;
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE:
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR:
+ device_printf(softc->dev,
+ "Unhandled async completion type %u\n", async_id);
+ break;
+ default:
+ device_printf(softc->dev,
+ "Unknown async completion type %u\n", async_id);
+ break;
+ }
+}
+
+static void
+bnxt_def_cp_task(void *context)
+{
+ if_ctx_t ctx = context;
+ struct bnxt_softc *softc = iflib_get_softc(ctx);
+ struct bnxt_cp_ring *cpr = &softc->def_cp_ring;
+
+ /* Handle completions on the default completion ring */
+ struct cmpl_base *cmpl;
+ uint32_t cons = cpr->cons;
+ bool v_bit = cpr->v_bit;
+ bool last_v_bit;
+ uint32_t last_cons;
+ uint16_t type;
+
+ for (;;) {
+ last_cons = cons;
+ last_v_bit = v_bit;
+ NEXT_CP_CONS_V(&cpr->ring, cons, v_bit);
+ cmpl = &((struct cmpl_base *)cpr->ring.vaddr)[cons];
+
+ if (!CMP_VALID(cmpl, v_bit))
+ break;
+
+ type = le16toh(cmpl->type) & CMPL_BASE_TYPE_MASK;
+ switch (type) {
+ case CMPL_BASE_TYPE_HWRM_ASYNC_EVENT:
+ bnxt_handle_async_event(softc, cmpl);
+ break;
+ case CMPL_BASE_TYPE_TX_L2:
+ case CMPL_BASE_TYPE_RX_L2:
+ case CMPL_BASE_TYPE_RX_AGG:
+ case CMPL_BASE_TYPE_RX_TPA_START:
+ case CMPL_BASE_TYPE_RX_TPA_END:
+ case CMPL_BASE_TYPE_STAT_EJECT:
+ case CMPL_BASE_TYPE_HWRM_DONE:
+ case CMPL_BASE_TYPE_HWRM_FWD_REQ:
+ case CMPL_BASE_TYPE_HWRM_FWD_RESP:
+ case CMPL_BASE_TYPE_CQ_NOTIFICATION:
+ case CMPL_BASE_TYPE_SRQ_EVENT:
+ case CMPL_BASE_TYPE_DBQ_EVENT:
+ case CMPL_BASE_TYPE_QP_EVENT:
+ case CMPL_BASE_TYPE_FUNC_EVENT:
+ device_printf(softc->dev,
+ "Unhandled completion type %u\n", type);
+ break;
+ default:
+ device_printf(softc->dev,
+ "Unknown completion type %u\n", type);
+ break;
+ }
+ }
+
+ cpr->cons = last_cons;
+ cpr->v_bit = last_v_bit;
+ BNXT_CP_IDX_ENABLE_DB(&cpr->ring, cpr->cons);
+}
+
+static uint8_t
+get_phy_type(struct bnxt_softc *softc)
+{
+ struct bnxt_link_info *link_info = &softc->link_info;
+ uint8_t phy_type = link_info->phy_type;
+ uint16_t supported;
+
+ if (phy_type != HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN)
+ return phy_type;
+
+ /* Deduce the phy type from the media type and supported speeds */
+ supported = link_info->support_speeds;
+
+ if (link_info->media_type ==
+ HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP)
+ return HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET;
+ if (link_info->media_type ==
+ HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC) {
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB)
+ return HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX;
+ if (supported & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB)
+ return HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR;
+ return HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR;
+ }
+ if (link_info->media_type ==
+ HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE)
+ return HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR;
+
+ return phy_type;
+}
+
+bool
+bnxt_check_hwrm_version(struct bnxt_softc *softc)
+{
+ char buf[16];
+
+ sprintf(buf, "%hhu.%hhu.%hhu", softc->ver_info->hwrm_min_major,
+ softc->ver_info->hwrm_min_minor, softc->ver_info->hwrm_min_update);
+ if (softc->ver_info->hwrm_min_major > softc->ver_info->hwrm_if_major) {
+ device_printf(softc->dev,
+ "WARNING: HWRM version %s is too old (older than %s)\n",
+ softc->ver_info->hwrm_if_ver, buf);
+ return false;
+ }
+ else if(softc->ver_info->hwrm_min_major ==
+ softc->ver_info->hwrm_if_major) {
+ if (softc->ver_info->hwrm_min_minor >
+ softc->ver_info->hwrm_if_minor) {
+ device_printf(softc->dev,
+ "WARNING: HWRM version %s is too old (older than %s)\n",
+ softc->ver_info->hwrm_if_ver, buf);
+ return false;
+ }
+ else if (softc->ver_info->hwrm_min_minor ==
+ softc->ver_info->hwrm_if_minor) {
+ if (softc->ver_info->hwrm_min_update >
+ softc->ver_info->hwrm_if_update) {
+ device_printf(softc->dev,
+ "WARNING: HWRM version %s is too old (older than %s)\n",
+ softc->ver_info->hwrm_if_ver, buf);
+ return false;
+ }
+ }
+ }
+ return true;
+}
+
+static uint64_t
+bnxt_get_baudrate(struct bnxt_link_info *link)
+{
+ switch (link->link_speed) {
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB:
+ return IF_Mbps(100);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB:
+ return IF_Gbps(1);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB:
+ return IF_Gbps(2);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB:
+ return IF_Mbps(2500);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB:
+ return IF_Gbps(10);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB:
+ return IF_Gbps(20);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB:
+ return IF_Gbps(25);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB:
+ return IF_Gbps(40);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB:
+ return IF_Gbps(50);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB:
+ return IF_Gbps(100);
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB:
+ return IF_Mbps(10);
+ }
+ return IF_Gbps(100);
+}
Index: sys/modules/Makefile
===================================================================
--- sys/modules/Makefile
+++ sys/modules/Makefile
@@ -57,6 +57,7 @@
${_bios} \
${_bktr} \
${_bm} \
+ bnxt \
bridgestp \
bwi \
bwn \
@@ -533,7 +534,7 @@
_sym= sym
# intr_disable() is a macro, causes problems
.if ${MK_SOURCELESS_UCODE} != "no"
-_cxgb= cxgb
+#_cxgb= cxgb
.endif
.endif
Index: sys/modules/bnxt/Makefile
===================================================================
--- /dev/null
+++ sys/modules/bnxt/Makefile
@@ -0,0 +1,14 @@
+#$FreeBSD$
+
+.PATH: ${.CURDIR}/../../dev/bnxt
+
+KMOD = if_bnxt
+SRCS = device_if.h bus_if.h pci_if.h pci_iov_if.h ifdi_if.h
+SRCS += opt_inet.h opt_inet6.h opt_rss.h
+SRCS += bnxt_txrx.c if_bnxt.c
+SRCS += bnxt_hwrm.c bnxt_hwrm.h
+SRCS += bnxt_sysctl.c bnxt_sysctl.h
+
+CFLAGS+= -DIFLIB
+
+.include <bsd.kmod.mk>

File Metadata

Mime Type
text/plain
Expires
Wed, Jul 22, 10:51 PM (9 h, 1 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
35384772
Default Alt Text
D7551.id19429.diff (877 KB)

Event Timeline