Page MenuHomeFreeBSD
Files F161032443

D13352.diff
No OneTemporary
Actions

D13352.diff
View Options

Index: head/sysutils/u-boot-sinovoip-bpi-m3/Makefile
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/Makefile
+++ head/sysutils/u-boot-sinovoip-bpi-m3/Makefile
@@ -1,51 +1,10 @@
# $FreeBSD$
-PORTNAME= u-boot
-PORTVERSION= 2016.05
-CATEGORIES= sysutils
-MASTER_SITES= ftp://ftp.denx.de/pub/u-boot/
-PKGNAMESUFFIX?= -sinovoip-bpi-m3
+MAINTAINER= uboot@FreeBSD.org
+MASTERDIR= ${.CURDIR}/../u-boot-master
-MAINTAINER= jmcneill@FreeBSD.org
-COMMENT= Cross-build U-Boot loader for Sinovoip Banana Pi M3
+MODEL= sinovoip-bpi-m3
+BOARD_CONFIG= Sinovoip_BPI_M3_defconfig
+FAMILY= allwinner
-LICENSE= GPLv2
-
-BUILD_DEPENDS= arm-none-eabi-gcc:devel/arm-none-eabi-gcc
-
-USES= gmake tar:bzip2
-WRKSRC= ${WRKDIR}/u-boot-${DISTVERSION}
-
-.include <bsd.port.pre.mk>
-NO_ARCH= yes
-
-MODEL?= sinovoip-bpi-m3
-CONF_TARGET?= Sinovoip_BPI_M3_defconfig
-
-SSP_UNSAFE= yes # cross-LD does not support -fstack-protector
-
-U_BOOT_DIR= share/u-boot/${PORTNAME}${PKGNAMESUFFIX}
-PLIST_FILES= ${U_BOOT_DIR}/u-boot.img \
- ${U_BOOT_DIR}/u-boot-sunxi-with-spl.bin \
- ${U_BOOT_DIR}/sunxi-spl.bin \
- ${U_BOOT_DIR}/README
-
-MAKE_ARGS+= ARCH=arm \
- CROSS_COMPILE=arm-none-eabi-
-
-post-patch:
- @${REINPLACE_CMD} -e "s,%%MODEL%%,${MODEL}," \
- ${WRKSRC}/include/configs/sunxi-common.h
-
-do-configure:
- (cd ${WRKSRC}; ${MAKE_CMD} ${CONF_TARGET})
-
-do-install:
- ${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
- ${INSTALL_DATA} ${WRKSRC}/spl/sunxi-spl.bin ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
- ${INSTALL_DATA} ${WRKSRC}/u-boot-sunxi-with-spl.bin \
- ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
- ${INSTALL_DATA} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
- ${INSTALL_DATA} ${DESCR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
-
-.include <bsd.port.post.mk>
+.include "${MASTERDIR}/Makefile"
Index: head/sysutils/u-boot-sinovoip-bpi-m3/distinfo
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/distinfo
+++ head/sysutils/u-boot-sinovoip-bpi-m3/distinfo
@@ -1,3 +0,0 @@
-TIMESTAMP = 1467921377
-SHA256 (u-boot-2016.05.tar.bz2) = 87d02275615aaf0cd007b54cbe9fbadceef2bee7c79e6c323ea1ae8956dcb171
-SIZE (u-boot-2016.05.tar.bz2) = 11325053
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-api_api.c
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-api_api.c
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-api_api.c
@@ -1,81 +0,0 @@
---- api/api.c.orig 2016-04-12 02:22:25 UTC
-+++ api/api.c
-@@ -495,45 +495,49 @@ static int API_env_set(va_list ap)
- */
- static int API_env_enum(va_list ap)
- {
-- int i, n;
-- char *last, **next;
-+ int i;
-+ char *last, **next, *s;
-+ ENTRY *match, search;
-+ static char *buf;
-+ size_t buflen;
-
- last = (char *)va_arg(ap, u_int32_t);
-
- if ((next = (char **)va_arg(ap, u_int32_t)) == NULL)
- return API_EINVAL;
-
-- if (last == NULL)
-- /* start over */
-- *next = ((char *)env_get_addr(0));
-- else {
-- *next = last;
--
-- for (i = 0; env_get_char(i) != '\0'; i = n + 1) {
-- for (n = i; env_get_char(n) != '\0'; ++n) {
-- if (n >= CONFIG_ENV_SIZE) {
-- /* XXX shouldn't we set *next = NULL?? */
-- return 0;
-- }
-- }
--
-- if (envmatch((uchar *)last, i) < 0)
-- continue;
--
-- /* try to get next name */
-- i = n + 1;
-- if (env_get_char(i) == '\0') {
-- /* no more left */
-- *next = NULL;
-- return 0;
-- }
--
-- *next = ((char *)env_get_addr(i));
-- return 0;
-+ /*
-+ * This leverages realloc's behavior of growing but never shrinking the
-+ * existing buffer.
-+ */
-+ if (last == NULL) {
-+ i = 0;
-+ buf = realloc(buf, 512); /* Start with reasonable size buf. */
-+ } else {
-+ buf = realloc(buf, strlen(last) + 1);
-+ strcpy(buf, last);
-+ if ((s = strchr(buf, '=')) != NULL)
-+ *s = 0;
-+ search.key = buf;
-+ if ((i = hsearch_r(search, FIND, &match, &env_htab, 0)) == 0) {
-+ i = API_EINVAL;
-+ goto done;
- }
- }
-
-+ /* hmatch on empty string is effectively "get next entry after i". */
-+ if ((i = hmatch_r("", i, &match, &env_htab)) == 0)
-+ goto done;
-+ buflen = strlen(match->key) + strlen(match->data) + 2;
-+ buf = realloc(buf, buflen);
-+ snprintf(buf, buflen, "%s=%s", match->key, match->data);
-+ *next = buf;
- return 0;
-+done:
-+ free(buf);
-+ buf = NULL;
-+ *next = NULL;
-+ return i;
- }
-
- /*
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-api_api__net.c
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-api_api__net.c
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-api_api__net.c
@@ -1,11 +0,0 @@
---- api/api_net.c.orig 2016-04-12 02:22:25 UTC
-+++ api/api_net.c
-@@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR;
-
- #define errf(fmt, args...) do { printf("ERROR @ %s(): ", __func__); printf(fmt, ##args); } while (0)
-
--#ifdef CONFIG_CMD_NET
-+#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
-
- static int dev_valid_net(void *cookie)
- {
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-board_sunxi_board.c
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-board_sunxi_board.c
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-board_sunxi_board.c
@@ -1,13 +0,0 @@
---- board/sunxi/board.c.orig 2016-04-12 02:22:25 UTC
-+++ board/sunxi/board.c
-@@ -524,6 +524,10 @@ void sunxi_board_init(void)
- power_failed |= axp_set_fldo(2, CONFIG_AXP_FLDO2_VOLT);
- power_failed |= axp_set_fldo(3, CONFIG_AXP_FLDO3_VOLT);
- #endif
-+
-+#ifdef CONFIG_AXP818_POWER
-+ power_failed |= axp_set_dc1sw(CONFIG_AXP_DC1SW_EN);
-+#endif
- #endif
- printf("DRAM:");
- ramsize = sunxi_dram_init();
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-cmd_elf.c
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-cmd_elf.c
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-cmd_elf.c
@@ -1,29 +0,0 @@
---- cmd/elf.c.orig 2016-04-12 02:22:25 UTC
-+++ cmd/elf.c
-@@ -110,22 +110,12 @@ static unsigned long do_bootelf_exec(ulo
- unsigned long ret;
-
- /*
-- * QNX images require the data cache is disabled.
-- * Data cache is already flushed, so just turn it off.
-- */
-- int dcache = dcache_status();
-- if (dcache)
-- dcache_disable();
--
-- /*
-- * pass address parameter as argv[0] (aka command name),
-- * and all remaining args
-+ * FreeBSD wants the caches enabled while ubldr runs, and as of r276397
-+ * the kernel can tolerate being entered with internal (but not external
-+ * PL310) caches enabled on armv6/7 systems. So don't disable caches
-+ * here, just launch the program directly.
- */
- ret = entry(argc, argv);
--
-- if (dcache)
-- dcache_enable();
--
- return ret;
- }
-
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-cmd_test.c
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-cmd_test.c
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-cmd_test.c
@@ -1,19 +0,0 @@
---- cmd/test.c.orig 2016-04-12 02:22:25 UTC
-+++ cmd/test.c
-@@ -56,9 +56,14 @@ static int do_test(cmd_tbl_t *cmdtp, int
- char * const *ap;
- int i, op, left, adv, expr, last_expr, last_unop, last_binop;
-
-- /* args? */
-- if (argc < 3)
-+ /*
-+ * If no args, that's bogus, return false.
-+ * If op is -z and no other args, answer is Yes, string is empty.
-+ */
-+ if (argc < 2)
- return 1;
-+ else if (argc == 2)
-+ return !(strcmp(argv[1], "-z") == 0);
-
- #ifdef DEBUG
- {
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-configs_Sinovoip__BPI__M3__defconfig
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-configs_Sinovoip__BPI__M3__defconfig
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-configs_Sinovoip__BPI__M3__defconfig
@@ -1,14 +0,0 @@
---- configs/Sinovoip_BPI_M3_defconfig.orig 2016-05-16 11:40:32.000000000 -0300
-+++ configs/Sinovoip_BPI_M3_defconfig 2016-07-07 17:05:19.339338000 -0300
-@@ -32,3 +32,11 @@
- CONFIG_AXP_DLDO3_VOLT=2500
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_MUSB_HOST=y
-+
-+# FreeBSD changes
-+CONFIG_CMD_GPIO=y
-+CONFIG_AXP_DCDC1_VOLT=3300
-+CONFIG_AXP_DC1SW_EN=1
-+# SATA port
-+#CONFIG_INITIAL_USB_SCAN_DELAY=500
-+#CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPD(25)"
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_mmc_mmc.c
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_mmc_mmc.c
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_mmc_mmc.c
@@ -1,78 +0,0 @@
---- drivers/mmc/mmc.c.orig 2016-04-12 02:22:25 UTC
-+++ drivers/mmc/mmc.c
-@@ -23,6 +23,7 @@
-
- static struct list_head mmc_devices;
- static int cur_dev_num = -1;
-+static int mmc_error_print_max = -1;
-
- __weak int board_mmc_getwp(struct mmc *mmc)
- {
-@@ -1586,9 +1587,14 @@ void mmc_destroy(struct mmc *mmc)
- struct blk_desc *mmc_get_dev(int dev)
- {
- struct mmc *mmc = find_mmc_device(dev);
-- if (!mmc || mmc_init(mmc))
-+ if (!mmc)
- return NULL;
-
-+ /* If mmc_init fails, mmc->block_dev will be of type
-+ * DEV_TYPE_UNKNOWN with blksz and lba set to zero.
-+ */
-+ mmc_init(mmc);
-+
- return &mmc->block_dev;
- }
- #endif
-@@ -1623,7 +1629,7 @@ int mmc_start_init(struct mmc *mmc)
- err = mmc->cfg->ops->init(mmc);
-
- if (err)
-- return err;
-+ goto done;
-
- mmc->ddr_mode = 0;
- mmc_set_bus_width(mmc, 1);
-@@ -1633,7 +1639,7 @@ int mmc_start_init(struct mmc *mmc)
- err = mmc_go_idle(mmc);
-
- if (err)
-- return err;
-+ goto done;
-
- /* The internal partition reset to user partition(0) at every CMD0*/
- mmc->block_dev.hwpart = 0;
-@@ -1650,15 +1656,31 @@ int mmc_start_init(struct mmc *mmc)
-
- if (err) {
- #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-- printf("Card did not respond to voltage select!\n");
-+ if (mmc_error_print_max < 4) {
-+ mmc_error_print_max++;
-+ printf("Card did not respond to voltage select!\n");
-+ if (mmc_error_print_max == 4) {
-+ printf("Discarding further error messages\n");
-+ }
-+ }
- #endif
-- return UNUSABLE_ERR;
-+ goto done;
- }
- }
-
- if (!err)
- mmc->init_in_progress = 1;
-
-+done:
-+ if (err) {
-+ mmc->has_init = 0;
-+ mmc->block_dev.type = DEV_TYPE_UNKNOWN;
-+ mmc->block_dev.blksz = 0;
-+ mmc->block_dev.lba = 0;
-+ } else {
-+ mmc->has_init = 1;
-+ }
-+
- return err;
- }
-
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_power_Kconfig
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_power_Kconfig
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_power_Kconfig
@@ -1,16 +0,0 @@
---- drivers/power/Kconfig.orig 2016-04-12 02:22:25 UTC
-+++ drivers/power/Kconfig
-@@ -125,6 +125,13 @@ config AXP_DCDC5_VOLT
- On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V,
- 1.35V if DDR3L is used.
-
-+config AXP_DC1SW_EN
-+ int "axp pmic dc1sw enable"
-+ depends on AXP818_POWER
-+ default 0 if AXP818_POWER
-+ ---help---
-+ Enable DC1SW switch.
-+
- config AXP_ALDO1_VOLT
- int "axp pmic (a)ldo1 voltage"
- depends on AXP221_POWER || AXP818_POWER
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_power_axp818.c
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_power_axp818.c
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-drivers_power_axp818.c
@@ -1,24 +0,0 @@
---- drivers/power/axp818.c.orig 2016-04-12 02:22:25 UTC
-+++ drivers/power/axp818.c
-@@ -225,6 +225,21 @@ int axp_set_fldo(int fldo_num, unsigned
- AXP818_OUTPUT_CTRL3_FLDO1_EN << (fldo_num - 1));
- }
-
-+int
-+axp_set_dc1sw(int onoff)
-+{
-+ int ret;
-+
-+ if (onoff)
-+ ret = pmic_bus_setbits(AXP818_OUTPUT_CTRL2,
-+ AXP818_OUTPUT_CTRL2_DC1SW_EN);
-+ else
-+ ret = pmic_bus_clrbits(AXP818_OUTPUT_CTRL2,
-+ AXP818_OUTPUT_CTRL2_DC1SW_EN);
-+
-+ return ret;
-+}
-+
- int axp_init(void)
- {
- u8 axp_chip_id;
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_axp818.h
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_axp818.h
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_axp818.h
@@ -1,10 +0,0 @@
---- include/axp818.h.orig 2016-04-12 02:22:25 UTC
-+++ include/axp818.h
-@@ -24,6 +24,7 @@
- #define AXP818_OUTPUT_CTRL2_DLDO2_EN (1 << 4)
- #define AXP818_OUTPUT_CTRL2_DLDO3_EN (1 << 5)
- #define AXP818_OUTPUT_CTRL2_DLDO4_EN (1 << 6)
-+#define AXP818_OUTPUT_CTRL2_DC1SW_EN (1 << 7)
- #define AXP818_OUTPUT_CTRL3 0x13
- #define AXP818_OUTPUT_CTRL3_FLDO1_EN (1 << 2)
- #define AXP818_OUTPUT_CTRL3_FLDO2_EN (1 << 3)
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_axp__pmic.h
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_axp__pmic.h
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_axp__pmic.h
@@ -1,10 +0,0 @@
---- include/axp_pmic.h.orig 2016-04-12 02:22:25 UTC
-+++ include/axp_pmic.h
-@@ -32,6 +32,7 @@ int axp_set_aldo4(unsigned int mvolt);
- int axp_set_dldo(int dldo_num, unsigned int mvolt);
- int axp_set_eldo(int eldo_num, unsigned int mvolt);
- int axp_set_fldo(int fldo_num, unsigned int mvolt);
-+int axp_set_dc1sw(int onoff);
- int axp_init(void);
- int axp_get_sid(unsigned int *sid);
-
Index: head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_configs_sunxi-common.h
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_configs_sunxi-common.h
+++ head/sysutils/u-boot-sinovoip-bpi-m3/files/patch-include_configs_sunxi-common.h
@@ -1,78 +0,0 @@
---- include/configs/sunxi-common.h.orig 2016-05-16 11:40:32.000000000 -0300
-+++ include/configs/sunxi-common.h 2016-07-07 17:00:25.673890000 -0300
-@@ -513,4 +513,75 @@
- #define CONFIG_EXTRA_ENV_SETTINGS
- #endif
-
-+/*****************************************************************************
-+ * FreeBSD customizations from here down.
-+ ****************************************************************************/
-+
-+/* Add the API and ELF features needed for ubldr. */
-+#ifndef CONFIG_SPL_BUILD
-+#define CONFIG_API
-+#ifndef CONFIG_CMD_ELF
-+#define CONFIG_CMD_ELF
-+#endif
-+#ifndef CONFIG_CMD_ENV_EXISTS
-+#define CONFIG_CMD_ENV_EXISTS
-+#endif
-+#define CONFIG_EFI_PARTITION
-+#endif
-+
-+/* Turn off dcache. */
-+#ifndef CONFIG_SPL_BUILD
-+#define CONFIG_SYS_DCACHE_OFF
-+#define CONFIG_CMD_CACHE
-+#endif
-+
-+/* Save the env to the fat partition. */
-+#ifndef CONFIG_SPL_BUILD
-+#undef CONFIG_ENV_IS_NOWHERE
-+#undef CONFIG_ENV_IS_IN_NAND
-+#undef CONFIG_ENV_IS_IN_MMC
-+#undef CONFIG_ENV_IS_IN_SPI_FLASH
-+#define CONFIG_ENV_IS_IN_FAT
-+#define CONFIG_FAT_WRITE
-+#define CONFIG_SYS_MMC_MAX_DEVICE 4
-+#define FAT_ENV_INTERFACE "mmc"
-+#define FAT_ENV_DEVICE_AND_PART "0:1"
-+#define FAT_ENV_FILE "u-boot.env"
-+#endif
-+
-+/* Create a small(ish) boot environment for FreeBSD. */
-+#ifndef CONFIG_SPL_BUILD
-+#undef CONFIG_EXTRA_ENV_SETTINGS
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ MEM_LAYOUT_ENV_SETTINGS \
-+ CONSOLE_STDOUT_SETTINGS \
-+ "stdin=serial,usbkbd\0" \
-+ "fdtfile=%%MODEL%%.dtb\0" \
-+ "console=ttyS0,115200\0" \
-+ "Fatboot=" \
-+ "env exists loaderdev || env set loaderdev ${fatdev}; " \
-+ "env exists UserFatboot && run UserFatboot; " \
-+ "echo Booting from: ${fatdev} ${bootfile}; " \
-+ "fatload ${fatdev} ${kernel_addr_r} ${bootfile} && bootelf; " \
-+ "\0" \
-+ "Netboot=" \
-+ "env exists loaderdev || env set loaderdev net; " \
-+ "env exists UserNetboot && run UserNetboot; " \
-+ "dhcp ${kernel_addr_r} ${bootfile} && bootelf; " \
-+ "\0" \
-+ "preboot=usb start; " \
-+ "env exists bootfile || env set bootfile ubldr; " \
-+ "env exists SetupFatdev && run SetupFatdev; " \
-+ "env exists UserPreboot && run UserPreboot; " \
-+ "\0" \
-+ "SetupFatdev=" \
-+ "env exists fatdev || env set fatdev 'mmc 0'; " \
-+ "\0"
-+
-+#undef CONFIG_BOOTCOMMAND
-+#define CONFIG_BOOTCOMMAND "run Fatboot"
-+#undef CONFIG_PREBOOT
-+#define CONFIG_PREBOOT "run preboot"
-+#endif
-+
- #endif /* _SUNXI_COMMON_CONFIG_H */
Index: head/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr
===================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr
+++ head/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr
@@ -1,19 +1,19 @@
U-Boot loader for Banana Pi M3.
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=/usr/local/share/u-boot/u-boot-sinovoip-bpi-m3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
This version is patched so that:
* ELF and API features are enabled.
* The default environment is trimmed to just what's needed to boot.
* The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
- using the fdtfile env variable. ubldr loads the DTB from /boot/dtb/ on
+ * The DTB file name is chosen based on the board model and passed to ubldr.bin
+ using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
the FreeBSD partition.
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
+ * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
to address 0x42000000, and launches it.
-For information about running FreeBSD on Banana Pi M3, see
+For information about running FreeBSD on Allwinner boards, see
https://wiki.freebsd.org/FreeBSD/arm/Allwinner
For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot

File Metadata

Mime Type
text/plain
Expires
Wed, Jul 1, 12:09 AM (32 m, 9 s)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
34496774
Default Alt Text
D13352.diff (17 KB)

Event Timeline