Page MenuHomeFreeBSD
Files F159658875

D10907.id.diff
No OneTemporary
Actions

D10907.id.diff
View Options

Index: head/sys/boot/fdt/dts/arm/armada-380.dtsi
===================================================================
--- head/sys/boot/fdt/dts/arm/armada-380.dtsi
+++ head/sys/boot/fdt/dts/arm/armada-380.dtsi
@@ -88,26 +88,29 @@
<0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
- 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
- 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
- 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
- 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
- 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
- 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
- 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */>;
+ 0x82000000 0x0 0xf1200000 MBUS_ID(0x08, 0xe8) 0xf1200000 0 0x00100000 /* Port 0 MEM */
+ 0x81000000 0x0 0xf1300000 MBUS_ID(0x08, 0xe0) 0xf1300000 0 0x00100000 /* Port 0 IO */
+ 0x82000000 0x0 0xf1400000 MBUS_ID(0x04, 0xe8) 0xf1400000 0 0x00100000 /* Port 1 MEM */
+ 0x81000000 0x0 0xf1500000 MBUS_ID(0x04, 0xe0) 0xf1500000 0 0x00100000 /* Port 1 IO */
+ 0x82000000 0x0 0xf1600000 MBUS_ID(0x04, 0xd8) 0xf1600000 0 0x00100000 /* Port 2 MEM */
+ 0x81000000 0x0 0xf1700000 MBUS_ID(0x04, 0xd0) 0xf1700000 0 0x00100000 /* Port 2 IO */
+ >;
/* x1 port */
pcie@1,0 {
+ compatible = "mrvl,pcie";
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
+ reg = <0x0 0x0 0x80000 0x0 0x2000>;
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
- 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ #interrupt-cells = <3>;
+ bus-range = <0 255>;
+ ranges = <0x82000000 0x0 0x0 0x82000000 0x0 0xf1200000 0x0 0x00100000
+ 0x81000000 0x0 0x0 0x81000000 0x0 0xf1300000 0x0 0x00100000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
@@ -116,16 +119,19 @@
/* x1 port */
pcie@2,0 {
+ compatible = "mrvl,pcie";
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
+ reg = <0x0 0x0 0x40000 0x0 0x2000>;
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
- 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ #interrupt-cells = <3>;
+ bus-range = <0 255>;
+ ranges = <0x82000000 0x0 0x0 0x82000000 0x0 0xf1400000 0x0 0x00100000
+ 0x81000000 0x0 0x0 0x81000000 0x0 0xf1500000 0x0 0x00100000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
@@ -134,16 +140,19 @@
/* x1 port */
pcie@3,0 {
+ compatible = "mrvl,pcie";
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
- reg = <0x1800 0 0 0 0>;
+ reg = <0x0 0x0 0x44000 0x0 0x2000>;
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
- 0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ #interrupt-cells = <3>;
+ bus-range = <0 255>;
+ ranges = <0x82000000 0x0 0x0 0x82000000 0x0 0xf1600000 0x0 0x00100000
+ 0x81000000 0x0 0x0 0x81000000 0x0 0xf1700000 0x0 0x00100000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
Index: head/sys/boot/fdt/dts/arm/armada-385.dtsi
===================================================================
--- head/sys/boot/fdt/dts/arm/armada-385.dtsi
+++ head/sys/boot/fdt/dts/arm/armada-385.dtsi
@@ -77,5 +77,124 @@
compatible = "marvell,mv88f6820-pinctrl";
};
};
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+ 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+ 0x82000000 0x0 0xf1200000 MBUS_ID(0x08, 0xe8) 0xf1200000 0 0x00100000 /* Port 0 MEM */
+ 0x81000000 0x0 0xf1300000 MBUS_ID(0x08, 0xe0) 0xf1300000 0 0x00100000 /* Port 0 IO */
+ 0x82000000 0x0 0xf1400000 MBUS_ID(0x04, 0xe8) 0xf1400000 0 0x00100000 /* Port 1 MEM */
+ 0x81000000 0x0 0xf1500000 MBUS_ID(0x04, 0xe0) 0xf1500000 0 0x00100000 /* Port 1 IO */
+ 0x82000000 0x0 0xf1600000 MBUS_ID(0x04, 0xd8) 0xf1600000 0 0x00100000 /* Port 2 MEM */
+ 0x81000000 0x0 0xf1700000 MBUS_ID(0x04, 0xd0) 0xf1700000 0 0x00100000 /* Port 2 IO */
+ 0x82000000 0x0 0xf1800000 MBUS_ID(0x04, 0xb8) 0xf1800000 0 0x00100000 /* Port 3 MEM */
+ 0x81000000 0x0 0xf1900000 MBUS_ID(0x04, 0xb0) 0xf1900000 0 0x00100000 /* Port 3 IO */
+ >;
+
+ /*
+ * This port can be either x4 or x1. When
+ * configured in x4 by the bootloader, then
+ * pcie@4,0 is not available.
+ */
+ pcie@1,0 {
+ compatible = "mrvl,pcie";
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x0 0x0 0x80000 0x0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <3>;
+ bus-range = <0 255>;
+ ranges = <0x82000000 0x0 0x0 0x82000000 0x0 0xf1200000 0x0 0x00100000
+ 0x81000000 0x0 0x0 0x81000000 0x0 0xf1300000 0x0 0x00100000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ /* x1 port */
+ pcie@2,0 {
+ compatible = "mrvl,pcie";
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0 0x0 0x40000 0x0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <3>;
+ bus-range = <0 255>;
+ ranges = <0x82000000 0x0 0x0 0x82000000 0x0 0xf1400000 0x0 0x00100000
+ 0x81000000 0x0 0x0 0x81000000 0x0 0xf1500000 0x0 0x00100000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ /* x1 port */
+ pcie@3,0 {
+ compatible = "mrvl,pcie";
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x0 0x0 0x44000 0x0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <3>;
+ bus-range = <0 255>;
+ ranges = <0x82000000 0x0 0x0 0x82000000 0x0 0xf1600000 0x0 0x00100000
+ 0x81000000 0x0 0x0 0x81000000 0x0 0xf1700000 0x0 0x00100000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ /*
+ * x1 port only available when pcie@1,0 is
+ * configured as a x1 port
+ */
+ pcie@4,0 {
+ compatible = "mrvl,pcie";
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ reg = <0x0 0x0 0x48000 0x0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <3>;
+ bus-range = <0 255>;
+ ranges = <0x82000000 0x0 0x0 0x82000000 0x0 0xf1800000 0x0 0x00100000
+ 0x81000000 0x0 0x0 0x81000000 0x0 0xf1900000 0x0 0x00100000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+ };
};
+
};
Index: head/sys/boot/fdt/dts/arm/armada-388-gp.dts
===================================================================
--- head/sys/boot/fdt/dts/arm/armada-388-gp.dts
+++ head/sys/boot/fdt/dts/arm/armada-388-gp.dts
@@ -239,11 +239,32 @@
gpio-fan,speed-map = < 0 0
3000 1>;
};
- };
+ pcie-controller {
+ status = "okay";
+ /*
+ * One PCIe units is accessible through
+ * standard PCIe slot on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
- pci0: pcie@f1080000 {
- status = "okay";
+ /*
+ * The two other PCIe units are accessible
+ * through mini PCIe slot on the board.
+ */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ pcie@3,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ };
};
+
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
Index: head/sys/boot/fdt/dts/arm/armada-38x.dtsi
===================================================================
--- head/sys/boot/fdt/dts/arm/armada-38x.dtsi
+++ head/sys/boot/fdt/dts/arm/armada-38x.dtsi
@@ -644,25 +644,6 @@
};
};
- pci0: pcie@f1080000 {
- compatible = "mrvl,pcie";
- status = "disabled";
- device_type = "pci";
- #interrupt-cells = <3>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf1080000 0x2000>;
- bus-range = <0 255>;
- ranges = <0x42000000 0x0 0xf1200000 0xf1200000 0x0 0x00100000
- 0x41000000 0x0 0x00000000 0xf1300000 0x0 0x00100000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 91 0>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x0000 0x0 0x0 0x1 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
- >;
- };
-
clocks {
/* 2 GHz fixed main PLL */
mainpll: mainpll {

File Metadata

Mime Type
text/plain
Expires
Wed, Jun 17, 6:14 PM (6 m, 58 s)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
34032499
Default Alt Text
D10907.id.diff (10 KB)

Event Timeline