Page MenuHomeFreeBSD
Files F159334089

D56681.diff
No OneTemporary
Actions

D56681.diff
View Options

diff --git a/website/content/en/releases/13.1R/hardware.adoc b/website/content/en/releases/13.1R/hardware.adoc
--- a/website/content/en/releases/13.1R/hardware.adoc
+++ b/website/content/en/releases/13.1R/hardware.adoc
@@ -977,7 +977,7 @@
**mrsas**
driver supports the following hardware:
-\[ Thunderbolt 6Gb/s MR controller ]
+[ Thunderbolt 6Gb/s MR controller ]
* LSI MegaRAID SAS 9265
* LSI MegaRAID SAS 9266
@@ -990,7 +990,7 @@
* DELL PERC H810
* DELL PERC H710/P
-\[ Invader/Fury 12Gb/s MR controller ]
+[ Invader/Fury 12Gb/s MR controller ]
* LSI MegaRAID SAS 9380
* LSI MegaRAID SAS 9361
@@ -1279,7 +1279,7 @@
**aue**
driver include:
-* Abocom UFE1000, DSB650TX\_NA
+* Abocom UFE1000, DSB650TX_NA
* Accton USB320-EC, SpeedStream
* ADMtek AN986, AN8511
* Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1317,10 +1317,10 @@
* Billionton SnapPort
* Billionton USB2AR
* Buffalo (Melco Inc.) LUA-U2-KTX
-* Corega USB2\_TX
+* Corega USB2_TX
* D-Link DUBE100
* Goodway GWUSB2E
-* JVC MP\_PRX1
+* JVC MP_PRX1
* LinkSys USB200M
* Netgear FA120
* Sitecom LN-029
@@ -3047,7 +3047,7 @@
The
-**snd\_ad1816**
+**snd_ad1816**
driver supports the following sound cards:
* Analog Devices AD1816
@@ -3055,7 +3055,7 @@
The
-**snd\_als4000**
+**snd_als4000**
driver supports the following sound cards:
* Avance Logic ALS4000
@@ -3063,7 +3063,7 @@
The
-**snd\_atiixp**
+**snd_atiixp**
driver supports the following audio chipsets:
* ATI IXP 200
@@ -3074,7 +3074,7 @@
The
-**snd\_cmi**
+**snd_cmi**
driver supports the following sound cards:
* CMedia CMI8338A
@@ -3085,7 +3085,7 @@
The
-**snd\_cs4281**
+**snd_cs4281**
driver supports the following sound cards:
* Crystal Semiconductor CS4281
@@ -3093,7 +3093,7 @@
The
-**snd\_csa**
+**snd_csa**
driver supports the following sound cards:
* Crystal Semiconductor CS4280
@@ -3112,13 +3112,13 @@
instead of the CS4297 AC97 codec.
Such configurations are not
supported by the
-**snd\_csa**
+**snd_csa**
driver yet.
The
-**snd\_ds1**
+**snd_ds1**
driver supports the following sound cards:
* Yamaha DS-1
@@ -3127,7 +3127,7 @@
The
-**snd\_emu10k1**
+**snd_emu10k1**
driver supports the following sound cards:
* Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -3138,7 +3138,7 @@
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver supports the following sound cards:
* Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -3155,7 +3155,7 @@
There is no MIDI support for this card.
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver does
*not*
support the following sound cards (although they have names
@@ -3175,7 +3175,7 @@
The
-**snd\_envy24**
+**snd_envy24**
driver supports the following audio devices:
* M-Audio Audiophile 2496
@@ -3188,7 +3188,7 @@
The
-**snd\_envy24ht**
+**snd_envy24ht**
driver supports the following audio devices:
* Audiotrak Prodigy 7.1
@@ -3212,7 +3212,7 @@
The
-**snd\_es137x**
+**snd_es137x**
driver supports the following sound cards:
* Creative CT5880-A
@@ -3230,7 +3230,7 @@
The
-**snd\_ess**
+**snd_ess**
driver supports the following sound cards:
* Ensoniq ESS ISA PnP/non-PnP
@@ -3238,7 +3238,7 @@
The
-**snd\_fm801**
+**snd_fm801**
driver supports audio devices based on the following chipset:
* Forte Media FM801
@@ -3246,7 +3246,7 @@
The
-**snd\_gusc**
+**snd_gusc**
driver supports the following sound cards:
* Gravis UltraSound MAX
@@ -3255,12 +3255,12 @@
The
-**snd\_hda**
+**snd_hda**
driver supports controllers having PCI class 4 (multimedia) and
subclass 3 (HDA), compatible with Intel HDA specification.
The
-**snd\_hda**
+**snd_hda**
driver supports more than two hundred different controllers and CODECs.
There is no sense to list all of them here, as in most cases specific CODEC
configuration and wiring are more important then type of the CODEC itself.
@@ -3268,7 +3268,7 @@
The
-**snd\_hdspe**
+**snd_hdspe**
driver supports the following audio devices:
* RME HDSPe AIO
@@ -3277,7 +3277,7 @@
The
-**snd\_ich**
+**snd_ich**
driver supports the following audio devices:
* AMD 768
@@ -3302,7 +3302,7 @@
The
-**snd\_maestro**
+**snd_maestro**
driver supports the following PCI sound cards:
* ESS Technology Maestro-1
@@ -3312,7 +3312,7 @@
The
-**snd\_maestro3**
+**snd_maestro3**
driver supports the following audio devices:
* ESS Technology Allegro-1
@@ -3321,7 +3321,7 @@
The
-**snd\_mss**
+**snd_mss**
driver supports the following audio devices:
* AD1845
@@ -3347,7 +3347,7 @@
The
-**snd\_neomagic**
+**snd_neomagic**
driver supports the following audio devices:
* NeoMagic 256AV
@@ -3356,7 +3356,7 @@
The
-**snd\_sbc**
+**snd_sbc**
driver supports the following sound cards:
* Avance Asound 110
@@ -3379,21 +3379,21 @@
The
-**snd\_solo**
+**snd_solo**
driver supports the following sound cards:
* ESS Solo-1 (ES1938 Chipset)
* ESS Solo-1E (ES1946 Chipset)
Note that older ESS ISA cards with ES18xx chipset are supported via
-snd\_ess(4)
+snd_ess(4)
and/or
-snd\_sbc(4).
+snd_sbc(4).
The
-**snd\_spicds**
+**snd_spicds**
driver supports the following codecs:
* AK4358
@@ -3406,7 +3406,7 @@
The
-**snd\_t4dwave**
+**snd_t4dwave**
driver supports the following audio devices:
* Acer Labs M5451
@@ -3417,7 +3417,7 @@
The
-**snd\_via8233**
+**snd_via8233**
driver supports the following audio chipsets:
* VIA VT8233
@@ -3430,7 +3430,7 @@
The
-**snd\_via82c686**
+**snd_via82c686**
driver supports audio devices based on the following chipset:
* VIA 82C686A
@@ -3438,7 +3438,7 @@
The
-**snd\_vibes**
+**snd_vibes**
driver supports audio devices based on the following chipset:
* S3 SonicVibes
@@ -3729,7 +3729,7 @@
The
-**ng\_ubt**
+**ng_ubt**
driver supports all Bluetooth USB devices that conform with
the Bluetooth specification v1.1, including:
diff --git a/website/content/en/releases/13.2R/hardware.adoc b/website/content/en/releases/13.2R/hardware.adoc
--- a/website/content/en/releases/13.2R/hardware.adoc
+++ b/website/content/en/releases/13.2R/hardware.adoc
@@ -977,7 +977,7 @@
**mrsas**
driver supports the following hardware:
-\[ Thunderbolt 6Gb/s MR controller ]
+[ Thunderbolt 6Gb/s MR controller ]
* LSI MegaRAID SAS 9265
* LSI MegaRAID SAS 9266
@@ -990,7 +990,7 @@
* DELL PERC H810
* DELL PERC H710/P
-\[ Invader/Fury 12Gb/s MR controller ]
+[ Invader/Fury 12Gb/s MR controller ]
* LSI MegaRAID SAS 9380
* LSI MegaRAID SAS 9361
@@ -1285,7 +1285,7 @@
**aue**
driver include:
-* Abocom UFE1000, DSB650TX\_NA
+* Abocom UFE1000, DSB650TX_NA
* Accton USB320-EC, SpeedStream
* ADMtek AN986, AN8511
* Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1323,10 +1323,10 @@
* Billionton SnapPort
* Billionton USB2AR
* Buffalo (Melco Inc.) LUA-U2-KTX
-* Corega USB2\_TX
+* Corega USB2_TX
* D-Link DUBE100
* Goodway GWUSB2E
-* JVC MP\_PRX1
+* JVC MP_PRX1
* LinkSys USB200M
* Netgear FA120
* Sitecom LN-029
@@ -3053,7 +3053,7 @@
The
-**snd\_ad1816**
+**snd_ad1816**
driver supports the following sound cards:
* Analog Devices AD1816
@@ -3061,7 +3061,7 @@
The
-**snd\_als4000**
+**snd_als4000**
driver supports the following sound cards:
* Avance Logic ALS4000
@@ -3069,7 +3069,7 @@
The
-**snd\_atiixp**
+**snd_atiixp**
driver supports the following audio chipsets:
* ATI IXP 200
@@ -3080,7 +3080,7 @@
The
-**snd\_cmi**
+**snd_cmi**
driver supports the following sound cards:
* CMedia CMI8338A
@@ -3091,7 +3091,7 @@
The
-**snd\_cs4281**
+**snd_cs4281**
driver supports the following sound cards:
* Crystal Semiconductor CS4281
@@ -3099,7 +3099,7 @@
The
-**snd\_csa**
+**snd_csa**
driver supports the following sound cards:
* Crystal Semiconductor CS4280
@@ -3118,13 +3118,13 @@
instead of the CS4297 AC97 codec.
Such configurations are not
supported by the
-**snd\_csa**
+**snd_csa**
driver yet.
The
-**snd\_ds1**
+**snd_ds1**
driver supports the following sound cards:
* Yamaha DS-1
@@ -3133,7 +3133,7 @@
The
-**snd\_emu10k1**
+**snd_emu10k1**
driver supports the following sound cards:
* Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -3144,7 +3144,7 @@
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver supports the following sound cards:
* Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -3161,7 +3161,7 @@
There is no MIDI support for this card.
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver does
*not*
support the following sound cards (although they have names
@@ -3181,7 +3181,7 @@
The
-**snd\_envy24**
+**snd_envy24**
driver supports the following audio devices:
* M-Audio Audiophile 2496
@@ -3194,7 +3194,7 @@
The
-**snd\_envy24ht**
+**snd_envy24ht**
driver supports the following audio devices:
* Audiotrak Prodigy 7.1
@@ -3218,7 +3218,7 @@
The
-**snd\_es137x**
+**snd_es137x**
driver supports the following sound cards:
* Creative CT5880-A
@@ -3236,7 +3236,7 @@
The
-**snd\_ess**
+**snd_ess**
driver supports the following sound cards:
* Ensoniq ESS ISA PnP/non-PnP
@@ -3244,7 +3244,7 @@
The
-**snd\_fm801**
+**snd_fm801**
driver supports audio devices based on the following chipset:
* Forte Media FM801
@@ -3252,7 +3252,7 @@
The
-**snd\_gusc**
+**snd_gusc**
driver supports the following sound cards:
* Gravis UltraSound MAX
@@ -3261,12 +3261,12 @@
The
-**snd\_hda**
+**snd_hda**
driver supports controllers having PCI class 4 (multimedia) and
subclass 3 (HDA), compatible with Intel HDA specification.
The
-**snd\_hda**
+**snd_hda**
driver supports more than two hundred different controllers and CODECs.
There is no sense to list all of them here, as in most cases specific CODEC
configuration and wiring are more important then type of the CODEC itself.
@@ -3274,7 +3274,7 @@
The
-**snd\_hdspe**
+**snd_hdspe**
driver supports the following audio devices:
* RME HDSPe AIO
@@ -3283,7 +3283,7 @@
The
-**snd\_ich**
+**snd_ich**
driver supports the following audio devices:
* AMD 768
@@ -3308,7 +3308,7 @@
The
-**snd\_maestro**
+**snd_maestro**
driver supports the following PCI sound cards:
* ESS Technology Maestro-1
@@ -3318,7 +3318,7 @@
The
-**snd\_maestro3**
+**snd_maestro3**
driver supports the following audio devices:
* ESS Technology Allegro-1
@@ -3327,7 +3327,7 @@
The
-**snd\_mss**
+**snd_mss**
driver supports the following audio devices:
* AD1845
@@ -3353,7 +3353,7 @@
The
-**snd\_neomagic**
+**snd_neomagic**
driver supports the following audio devices:
* NeoMagic 256AV
@@ -3362,7 +3362,7 @@
The
-**snd\_sbc**
+**snd_sbc**
driver supports the following sound cards:
* Avance Asound 110
@@ -3385,21 +3385,21 @@
The
-**snd\_solo**
+**snd_solo**
driver supports the following sound cards:
* ESS Solo-1 (ES1938 Chipset)
* ESS Solo-1E (ES1946 Chipset)
Note that older ESS ISA cards with ES18xx chipset are supported via
-snd\_ess(4)
+snd_ess(4)
and/or
-snd\_sbc(4).
+snd_sbc(4).
The
-**snd\_spicds**
+**snd_spicds**
driver supports the following codecs:
* AK4358
@@ -3412,7 +3412,7 @@
The
-**snd\_t4dwave**
+**snd_t4dwave**
driver supports the following audio devices:
* Acer Labs M5451
@@ -3423,7 +3423,7 @@
The
-**snd\_via8233**
+**snd_via8233**
driver supports the following audio chipsets:
* VIA VT8233
@@ -3436,7 +3436,7 @@
The
-**snd\_via82c686**
+**snd_via82c686**
driver supports audio devices based on the following chipset:
* VIA 82C686A
@@ -3444,7 +3444,7 @@
The
-**snd\_vibes**
+**snd_vibes**
driver supports audio devices based on the following chipset:
* S3 SonicVibes
@@ -3735,7 +3735,7 @@
The
-**ng\_ubt**
+**ng_ubt**
driver supports all Bluetooth USB devices that conform with
the Bluetooth specification v1.1, including:
diff --git a/website/content/en/releases/13.4R/hardware.adoc b/website/content/en/releases/13.4R/hardware.adoc
--- a/website/content/en/releases/13.4R/hardware.adoc
+++ b/website/content/en/releases/13.4R/hardware.adoc
@@ -1149,7 +1149,7 @@
**mrsas**
driver supports the following hardware:
-\[ Thunderbolt 6Gb/s MR controller ]
+[ Thunderbolt 6Gb/s MR controller ]
* LSI MegaRAID SAS 9265
* LSI MegaRAID SAS 9266
@@ -1162,7 +1162,7 @@
* DELL PERC H810
* DELL PERC H710/P
-\[ Invader/Fury 12Gb/s MR controller ]
+[ Invader/Fury 12Gb/s MR controller ]
* LSI MegaRAID SAS 9380
* LSI MegaRAID SAS 9361
@@ -1209,7 +1209,7 @@
The
-**ocs\_fc**
+**ocs_fc**
driver supports these Fibre Channel adapters:
Emulex 16/8G FC GEN 5 HBAS
@@ -1487,7 +1487,7 @@
**aue**
driver include:
-* Abocom UFE1000, DSB650TX\_NA
+* Abocom UFE1000, DSB650TX_NA
* Accton USB320-EC, SpeedStream
* ADMtek AN986, AN8511
* Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1525,10 +1525,10 @@
* Billionton SnapPort
* Billionton USB2AR
* Buffalo (Melco Inc.) LUA-U2-KTX
-* Corega USB2\_TX
+* Corega USB2_TX
* D-Link DUBE100
* Goodway GWUSB2E
-* JVC MP\_PRX1
+* JVC MP_PRX1
* LinkSys USB200M
* Netgear FA120
* Sitecom LN-029
@@ -2421,7 +2421,7 @@
The
-**rtwn\_usb**
+**rtwn_usb**
driver supports Realtek RTL8188CUS/RTL8188RU/RTL8188EU/RTL8192CU/RTL8192EU/RTL8812AU/RTL8821AU
based USB wireless network adapters, including:
@@ -2663,7 +2663,7 @@
See
usbconfig(8)
and
-usb\_quirk(4).
+usb_quirk(4).
@@ -2707,7 +2707,7 @@
"Zero-CD"
mode to modem mode.
This behavior can be disabled by setting
-*hw.usb.uhso.auto\_switch*
+*hw.usb.uhso.auto_switch*
to 0 using
sysctl(8).
@@ -2805,7 +2805,7 @@
The following cards are among those supported by the
-**ath\_hal**
+**ath_hal**
module:
*Card* Chip Bus Standard
@@ -3647,7 +3647,7 @@
The
-**snd\_ad1816**
+**snd_ad1816**
driver supports the following sound cards:
* Analog Devices AD1816
@@ -3655,7 +3655,7 @@
The
-**snd\_als4000**
+**snd_als4000**
driver supports the following sound cards:
* Avance Logic ALS4000
@@ -3663,7 +3663,7 @@
The
-**snd\_atiixp**
+**snd_atiixp**
driver supports the following audio chipsets:
* ATI IXP 200
@@ -3673,7 +3673,7 @@
The
-**snd\_cmi**
+**snd_cmi**
driver supports the following sound cards:
* CMedia CMI8338A
@@ -3684,7 +3684,7 @@
The
-**snd\_cs4281**
+**snd_cs4281**
driver supports the following sound cards:
* Crystal Semiconductor CS4281
@@ -3692,7 +3692,7 @@
The
-**snd\_csa**
+**snd_csa**
driver supports the following sound cards:
* Crystal Semiconductor CS4280
@@ -3711,13 +3711,13 @@
instead of the CS4297 AC97 codec.
Such configurations are not
supported by the
-**snd\_csa**
+**snd_csa**
driver yet.
The
-**snd\_ds1**
+**snd_ds1**
driver supports the following sound cards:
* Yamaha DS-1
@@ -3726,7 +3726,7 @@
The
-**snd\_emu10k1**
+**snd_emu10k1**
driver supports the following sound cards:
* Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -3737,7 +3737,7 @@
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver supports the following sound cards:
* Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -3754,7 +3754,7 @@
There is no MIDI support for this card.
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver does
*not*
support the following sound cards (although they have names
@@ -3774,7 +3774,7 @@
The
-**snd\_envy24**
+**snd_envy24**
driver supports the following audio devices:
* M-Audio Audiophile 2496
@@ -3787,7 +3787,7 @@
The
-**snd\_envy24ht**
+**snd_envy24ht**
driver supports the following audio devices:
* Audiotrak Prodigy 7.1
@@ -3811,7 +3811,7 @@
The
-**snd\_es137x**
+**snd_es137x**
driver supports the following sound cards:
* Creative CT5880-A
@@ -3829,7 +3829,7 @@
The
-**snd\_ess**
+**snd_ess**
driver supports the following sound cards:
* Ensoniq ESS ISA PnP/non-PnP
@@ -3837,7 +3837,7 @@
The
-**snd\_fm801**
+**snd_fm801**
driver supports audio devices based on the following chipset:
* Forte Media FM801
@@ -3845,7 +3845,7 @@
The
-**snd\_gusc**
+**snd_gusc**
driver supports the following sound cards:
* Gravis UltraSound MAX
@@ -3854,12 +3854,12 @@
The
-**snd\_hda**
+**snd_hda**
driver supports controllers having PCI class 4 (multimedia) and
subclass 3 (HDA), compatible with Intel HDA specification.
The
-**snd\_hda**
+**snd_hda**
driver supports more than two hundred different controllers and CODECs.
There is no sense to list all of them here, as in most cases specific CODEC
configuration and wiring are more important then type of the CODEC itself.
@@ -3867,7 +3867,7 @@
The
-**snd\_hdspe**
+**snd_hdspe**
driver supports the following audio devices:
* RME HDSPe AIO
@@ -3876,7 +3876,7 @@
The
-**snd\_ich**
+**snd_ich**
driver supports the following audio devices:
* AMD 768
@@ -3901,7 +3901,7 @@
The
-**snd\_maestro**
+**snd_maestro**
driver supports the following PCI sound cards:
* ESS Technology Maestro-1
@@ -3911,7 +3911,7 @@
The
-**snd\_maestro3**
+**snd_maestro3**
driver supports the following audio devices:
* ESS Technology Allegro-1
@@ -3920,7 +3920,7 @@
The
-**snd\_mss**
+**snd_mss**
driver supports the following audio devices:
* AD1845
@@ -3946,7 +3946,7 @@
The
-**snd\_neomagic**
+**snd_neomagic**
driver supports the following audio devices:
* NeoMagic 256AV
@@ -3955,7 +3955,7 @@
The
-**snd\_sbc**
+**snd_sbc**
driver supports the following sound cards:
* Avance Asound 110
@@ -3978,21 +3978,21 @@
The
-**snd\_solo**
+**snd_solo**
driver supports the following sound cards:
* ESS Solo-1 (ES1938 Chipset)
* ESS Solo-1E (ES1946 Chipset)
Note that older ESS ISA cards with ES18xx chipset are supported via
-snd\_ess(4)
+snd_ess(4)
and/or
-snd\_sbc(4).
+snd_sbc(4).
The
-**snd\_spicds**
+**snd_spicds**
driver supports the following codecs:
* AK4358
@@ -4005,7 +4005,7 @@
The
-**snd\_t4dwave**
+**snd_t4dwave**
driver supports the following audio devices:
* Acer Labs M5451
@@ -4016,7 +4016,7 @@
The
-**snd\_via8233**
+**snd_via8233**
driver supports the following audio chipsets:
* VIA VT8233
@@ -4029,7 +4029,7 @@
The
-**snd\_via82c686**
+**snd_via82c686**
driver supports audio devices based on the following chipset:
* VIA 82C686A
@@ -4037,7 +4037,7 @@
The
-**snd\_vibes**
+**snd_vibes**
driver supports audio devices based on the following chipset:
* S3 SonicVibes
@@ -4548,7 +4548,7 @@
The
-**ng\_ubt**
+**ng_ubt**
driver supports all Bluetooth USB devices that conform with
the Bluetooth specification v1.1, including:
@@ -4791,14 +4791,14 @@
The current version of the
-**netfpga10g\_nf10bmac**
+**netfpga10g_nf10bmac**
driver works with one PIO mode interface of the
NetFPGA-10G Embedded CPU Ethernet Core version 1.00a.
The following PLX/Avago/Broadcom chips are supported by the
-**ntb\_hw\_plx**
+**ntb_hw_plx**
driver:
* PEX 8713
@@ -4812,7 +4812,7 @@
These temperature sensors are supported by the
-**ow\_temp**
+**ow_temp**
driver:
DS1820
diff --git a/website/content/en/releases/13.5R/hardware.adoc b/website/content/en/releases/13.5R/hardware.adoc
--- a/website/content/en/releases/13.5R/hardware.adoc
+++ b/website/content/en/releases/13.5R/hardware.adoc
@@ -1160,7 +1160,7 @@
**mrsas**
driver supports the following hardware:
-\[ Thunderbolt 6Gb/s MR controller ]
+[ Thunderbolt 6Gb/s MR controller ]
* LSI MegaRAID SAS 9265
* LSI MegaRAID SAS 9266
@@ -1173,7 +1173,7 @@
* DELL PERC H810
* DELL PERC H710/P
-\[ Invader/Fury 12Gb/s MR controller ]
+[ Invader/Fury 12Gb/s MR controller ]
* LSI MegaRAID SAS 9380
* LSI MegaRAID SAS 9361
@@ -1220,7 +1220,7 @@
The
-**ocs\_fc**
+**ocs_fc**
driver supports these Fibre Channel adapters:
Emulex 16/8G FC GEN 5 HBAS
@@ -1498,7 +1498,7 @@
**aue**
driver include:
-* Abocom UFE1000, DSB650TX\_NA
+* Abocom UFE1000, DSB650TX_NA
* Accton USB320-EC, SpeedStream
* ADMtek AN986, AN8511
* Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1536,10 +1536,10 @@
* Billionton SnapPort
* Billionton USB2AR
* Buffalo (Melco Inc.) LUA-U2-KTX
-* Corega USB2\_TX
+* Corega USB2_TX
* D-Link DUBE100
* Goodway GWUSB2E
-* JVC MP\_PRX1
+* JVC MP_PRX1
* LinkSys USB200M
* Netgear FA120
* Sitecom LN-029
@@ -2432,7 +2432,7 @@
The
-**rtwn\_usb**
+**rtwn_usb**
driver supports Realtek RTL8188CUS/RTL8188RU/RTL8188EU/RTL8192CU/RTL8192EU/RTL8812AU/RTL8821AU
based USB wireless network adapters, including:
@@ -2675,7 +2675,7 @@
See
usbconfig(8)
and
-usb\_quirk(4).
+usb_quirk(4).
@@ -2719,7 +2719,7 @@
"Zero-CD"
mode to modem mode.
This behavior can be disabled by setting
-*hw.usb.uhso.auto\_switch*
+*hw.usb.uhso.auto_switch*
to 0 using
sysctl(8).
@@ -2817,7 +2817,7 @@
The following cards are among those supported by the
-**ath\_hal**
+**ath_hal**
module:
*Card* Chip Bus Standard
@@ -3660,7 +3660,7 @@
The
-**snd\_ad1816**
+**snd_ad1816**
driver supports the following sound cards:
* Analog Devices AD1816
@@ -3668,7 +3668,7 @@
The
-**snd\_als4000**
+**snd_als4000**
driver supports the following sound cards:
* Avance Logic ALS4000
@@ -3676,7 +3676,7 @@
The
-**snd\_atiixp**
+**snd_atiixp**
driver supports the following audio chipsets:
* ATI IXP 200
@@ -3686,7 +3686,7 @@
The
-**snd\_cmi**
+**snd_cmi**
driver supports the following sound cards:
* CMedia CMI8338A
@@ -3697,7 +3697,7 @@
The
-**snd\_cs4281**
+**snd_cs4281**
driver supports the following sound cards:
* Crystal Semiconductor CS4281
@@ -3705,7 +3705,7 @@
The
-**snd\_csa**
+**snd_csa**
driver supports the following sound cards:
* Crystal Semiconductor CS4280
@@ -3724,13 +3724,13 @@
instead of the CS4297 AC97 codec.
Such configurations are not
supported by the
-**snd\_csa**
+**snd_csa**
driver yet.
The
-**snd\_ds1**
+**snd_ds1**
driver supports the following sound cards:
* Yamaha DS-1
@@ -3739,7 +3739,7 @@
The
-**snd\_emu10k1**
+**snd_emu10k1**
driver supports the following sound cards:
* Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -3750,7 +3750,7 @@
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver supports the following sound cards:
* Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -3767,7 +3767,7 @@
There is no MIDI support for this card.
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver does
*not*
support the following sound cards (although they have names
@@ -3787,7 +3787,7 @@
The
-**snd\_envy24**
+**snd_envy24**
driver supports the following audio devices:
* M-Audio Audiophile 2496
@@ -3800,7 +3800,7 @@
The
-**snd\_envy24ht**
+**snd_envy24ht**
driver supports the following audio devices:
* Audiotrak Prodigy 7.1
@@ -3824,7 +3824,7 @@
The
-**snd\_es137x**
+**snd_es137x**
driver supports the following sound cards:
* Creative CT5880-A
@@ -3842,7 +3842,7 @@
The
-**snd\_ess**
+**snd_ess**
driver supports the following sound cards:
* Ensoniq ESS ISA PnP/non-PnP
@@ -3850,7 +3850,7 @@
The
-**snd\_fm801**
+**snd_fm801**
driver supports audio devices based on the following chipset:
* Forte Media FM801
@@ -3858,7 +3858,7 @@
The
-**snd\_gusc**
+**snd_gusc**
driver supports the following sound cards:
* Gravis UltraSound MAX
@@ -3867,12 +3867,12 @@
The
-**snd\_hda**
+**snd_hda**
driver supports controllers having PCI class 4 (multimedia) and
subclass 3 (HDA), compatible with Intel HDA specification.
The
-**snd\_hda**
+**snd_hda**
driver supports more than two hundred different controllers and CODECs.
There is no sense to list all of them here, as in most cases specific CODEC
configuration and wiring are more important then type of the CODEC itself.
@@ -3880,7 +3880,7 @@
The
-**snd\_hdspe**
+**snd_hdspe**
driver supports the following audio devices:
* RME HDSPe AIO
@@ -3889,7 +3889,7 @@
The
-**snd\_ich**
+**snd_ich**
driver supports the following audio devices:
* AMD 768
@@ -3914,7 +3914,7 @@
The
-**snd\_maestro**
+**snd_maestro**
driver supports the following PCI sound cards:
* ESS Technology Maestro-1
@@ -3924,7 +3924,7 @@
The
-**snd\_maestro3**
+**snd_maestro3**
driver supports the following audio devices:
* ESS Technology Allegro-1
@@ -3933,7 +3933,7 @@
The
-**snd\_mss**
+**snd_mss**
driver supports the following audio devices:
* AD1845
@@ -3959,7 +3959,7 @@
The
-**snd\_neomagic**
+**snd_neomagic**
driver supports the following audio devices:
* NeoMagic 256AV
@@ -3968,7 +3968,7 @@
The
-**snd\_sbc**
+**snd_sbc**
driver supports the following sound cards:
* Avance Asound 110
@@ -3991,21 +3991,21 @@
The
-**snd\_solo**
+**snd_solo**
driver supports the following sound cards:
* ESS Solo-1 (ES1938 Chipset)
* ESS Solo-1E (ES1946 Chipset)
Note that older ESS ISA cards with ES18xx chipset are supported via
-snd\_ess(4)
+snd_ess(4)
and/or
-snd\_sbc(4).
+snd_sbc(4).
The
-**snd\_spicds**
+**snd_spicds**
driver supports the following codecs:
* AK4358
@@ -4018,7 +4018,7 @@
The
-**snd\_t4dwave**
+**snd_t4dwave**
driver supports the following audio devices:
* Acer Labs M5451
@@ -4029,7 +4029,7 @@
The
-**snd\_via8233**
+**snd_via8233**
driver supports the following audio chipsets:
* VIA VT8233
@@ -4042,7 +4042,7 @@
The
-**snd\_via82c686**
+**snd_via82c686**
driver supports audio devices based on the following chipset:
* VIA 82C686A
@@ -4050,7 +4050,7 @@
The
-**snd\_vibes**
+**snd_vibes**
driver supports audio devices based on the following chipset:
* S3 SonicVibes
@@ -4561,7 +4561,7 @@
The
-**ng\_ubt**
+**ng_ubt**
driver supports all Bluetooth USB devices that conform with
the Bluetooth specification v1.1, including:
@@ -4803,14 +4803,14 @@
The current version of the
-**netfpga10g\_nf10bmac**
+**netfpga10g_nf10bmac**
driver works with one PIO mode interface of the
NetFPGA-10G Embedded CPU Ethernet Core version 1.00a.
The following PLX/Avago/Broadcom chips are supported by the
-**ntb\_hw\_plx**
+**ntb_hw_plx**
driver:
* PEX 8713
@@ -4824,7 +4824,7 @@
These temperature sensors are supported by the
-**ow\_temp**
+**ow_temp**
driver:
DS1820
diff --git a/website/content/en/releases/14.1R/hardware.adoc b/website/content/en/releases/14.1R/hardware.adoc
--- a/website/content/en/releases/14.1R/hardware.adoc
+++ b/website/content/en/releases/14.1R/hardware.adoc
@@ -1073,7 +1073,7 @@
**mrsas**
driver supports the following hardware:
-\[ Thunderbolt 6Gb/s MR controller ]
+[ Thunderbolt 6Gb/s MR controller ]
* LSI MegaRAID SAS 9265
* LSI MegaRAID SAS 9266
@@ -1086,7 +1086,7 @@
* DELL PERC H810
* DELL PERC H710/P
-\[ Invader/Fury 12Gb/s MR controller ]
+[ Invader/Fury 12Gb/s MR controller ]
* LSI MegaRAID SAS 9380
* LSI MegaRAID SAS 9361
@@ -1133,7 +1133,7 @@
The
-**ocs\_fc**
+**ocs_fc**
driver supports these Fibre Channel adapters:
Emulex 16/8G FC GEN 5 HBAS
@@ -1357,7 +1357,7 @@
**aue**
driver include:
-* Abocom UFE1000, DSB650TX\_NA
+* Abocom UFE1000, DSB650TX_NA
* Accton USB320-EC, SpeedStream
* ADMtek AN986, AN8511
* Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1395,10 +1395,10 @@
* Billionton SnapPort
* Billionton USB2AR
* Buffalo (Melco Inc.) LUA-U2-KTX
-* Corega USB2\_TX
+* Corega USB2_TX
* D-Link DUBE100
* Goodway GWUSB2E
-* JVC MP\_PRX1
+* JVC MP_PRX1
* LinkSys USB200M
* Netgear FA120
* Sitecom LN-029
@@ -2296,7 +2296,7 @@
The
-**rtwn\_usb**
+**rtwn_usb**
driver supports Realtek RTL8188CUS/RTL8188RU/RTL8188EU/RTL8192CU/RTL8192EU/RTL8812AU/RTL8821AU
based USB wireless network adapters, including:
@@ -2542,7 +2542,7 @@
See
usbconfig(8)
and
-usb\_quirk(4).
+usb_quirk(4).
@@ -2586,7 +2586,7 @@
"Zero-CD"
mode to modem mode.
This behavior can be disabled by setting
-*hw.usb.uhso.auto\_switch*
+*hw.usb.uhso.auto_switch*
to 0 using
sysctl(8).
@@ -2681,7 +2681,7 @@
The following cards are among those supported by the
-**ath\_hal**
+**ath_hal**
module:
*Card* Chip Bus Standard
@@ -3456,7 +3456,7 @@
The
-**snd\_als4000**
+**snd_als4000**
driver supports the following sound cards:
* Avance Logic ALS4000
@@ -3464,7 +3464,7 @@
The
-**snd\_atiixp**
+**snd_atiixp**
driver supports the following audio chipsets:
* ATI IXP 200
@@ -3474,7 +3474,7 @@
The
-**snd\_cmi**
+**snd_cmi**
driver supports the following sound cards:
* CMedia CMI8338A
@@ -3485,7 +3485,7 @@
The
-**snd\_cs4281**
+**snd_cs4281**
driver supports the following sound cards:
* Crystal Semiconductor CS4281
@@ -3493,7 +3493,7 @@
The
-**snd\_csa**
+**snd_csa**
driver supports the following sound cards:
* Crystal Semiconductor CS4280
@@ -3512,14 +3512,14 @@
instead of the CS4297 AC97 codec.
Such configurations are not
supported by the
-**snd\_csa**
+**snd_csa**
driver yet.
The
-**snd\_emu10k1**
+**snd_emu10k1**
driver supports the following sound cards:
* Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -3530,7 +3530,7 @@
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver supports the following sound cards:
* Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -3547,7 +3547,7 @@
There is no MIDI support for this card.
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver does
*not*
support the following sound cards (although they have names
@@ -3567,7 +3567,7 @@
The
-**snd\_envy24**
+**snd_envy24**
driver supports the following audio devices:
* M-Audio Audiophile 2496
@@ -3580,7 +3580,7 @@
The
-**snd\_envy24ht**
+**snd_envy24ht**
driver supports the following audio devices:
* Audiotrak Prodigy 7.1
@@ -3604,7 +3604,7 @@
The
-**snd\_es137x**
+**snd_es137x**
driver supports the following sound cards:
* Creative CT5880-A
@@ -3623,7 +3623,7 @@
The
-**snd\_fm801**
+**snd_fm801**
driver supports audio devices based on the following chipset:
* Forte Media FM801
@@ -3632,12 +3632,12 @@
The
-**snd\_hda**
+**snd_hda**
driver supports controllers having PCI class 4 (multimedia) and
subclass 3 (HDA), compatible with Intel HDA specification.
The
-**snd\_hda**
+**snd_hda**
driver supports more than two hundred different controllers and CODECs.
There is no sense to list all of them here, as in most cases specific CODEC
configuration and wiring are more important then type of the CODEC itself.
@@ -3645,7 +3645,7 @@
The
-**snd\_hdspe**
+**snd_hdspe**
driver supports the following audio devices:
* RME HDSPe AIO
@@ -3661,7 +3661,7 @@
The
-**snd\_ich**
+**snd_ich**
driver supports the following audio devices:
* AMD 768
@@ -3687,7 +3687,7 @@
The
-**snd\_maestro3**
+**snd_maestro3**
driver supports the following audio devices:
* ESS Technology Allegro-1
@@ -3697,7 +3697,7 @@
The
-**snd\_neomagic**
+**snd_neomagic**
driver supports the following audio devices:
* NeoMagic 256AV
@@ -3707,7 +3707,7 @@
The
-**snd\_solo**
+**snd_solo**
driver supports the following sound cards:
* ESS Solo-1 (ES1938 Chipset)
@@ -3716,7 +3716,7 @@
The
-**snd\_spicds**
+**snd_spicds**
driver supports the following codecs:
* AK4358
@@ -3729,7 +3729,7 @@
The
-**snd\_t4dwave**
+**snd_t4dwave**
driver supports the following audio devices:
* Acer Labs M5451
@@ -3740,7 +3740,7 @@
The
-**snd\_via8233**
+**snd_via8233**
driver supports the following audio chipsets:
* VIA VT8233
@@ -3753,7 +3753,7 @@
The
-**snd\_via82c686**
+**snd_via82c686**
driver supports audio devices based on the following chipset:
* VIA 82C686A
@@ -3761,7 +3761,7 @@
The
-**snd\_vibes**
+**snd_vibes**
driver supports audio devices based on the following chipset:
* S3 SonicVibes
@@ -4288,7 +4288,7 @@
The
-**ng\_ubt**
+**ng_ubt**
driver supports all Bluetooth USB devices that conform with
the Bluetooth specification v1.1, including:
@@ -4531,14 +4531,14 @@
The current version of the
-**netfpga10g\_nf10bmac**
+**netfpga10g_nf10bmac**
driver works with one PIO mode interface of the
NetFPGA-10G Embedded CPU Ethernet Core version 1.00a.
The following PLX/Avago/Broadcom chips are supported by the
-**ntb\_hw\_plx**
+**ntb_hw_plx**
driver:
* PEX 8713
@@ -4552,7 +4552,7 @@
These temperature sensors are supported by the
-**ow\_temp**
+**ow_temp**
driver:
DS1820
diff --git a/website/content/en/releases/14.2R/hardware.adoc b/website/content/en/releases/14.2R/hardware.adoc
--- a/website/content/en/releases/14.2R/hardware.adoc
+++ b/website/content/en/releases/14.2R/hardware.adoc
@@ -1082,7 +1082,7 @@
**mrsas**
driver supports the following hardware:
-\[ Thunderbolt 6Gb/s MR controller ]
+[ Thunderbolt 6Gb/s MR controller ]
* LSI MegaRAID SAS 9265
* LSI MegaRAID SAS 9266
@@ -1095,7 +1095,7 @@
* DELL PERC H810
* DELL PERC H710/P
-\[ Invader/Fury 12Gb/s MR controller ]
+[ Invader/Fury 12Gb/s MR controller ]
* LSI MegaRAID SAS 9380
* LSI MegaRAID SAS 9361
@@ -1142,7 +1142,7 @@
The
-**ocs\_fc**
+**ocs_fc**
driver supports these Fibre Channel adapters:
Emulex 16/8G FC GEN 5 HBAS
@@ -1366,7 +1366,7 @@
**aue**
driver include:
-* Abocom UFE1000, DSB650TX\_NA
+* Abocom UFE1000, DSB650TX_NA
* Accton USB320-EC, SpeedStream
* ADMtek AN986, AN8511
* Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1404,10 +1404,10 @@
* Billionton SnapPort
* Billionton USB2AR
* Buffalo (Melco Inc.) LUA-U2-KTX
-* Corega USB2\_TX
+* Corega USB2_TX
* D-Link DUBE100
* Goodway GWUSB2E
-* JVC MP\_PRX1
+* JVC MP_PRX1
* LinkSys USB200M
* Netgear FA120
* Sitecom LN-029
@@ -2513,7 +2513,7 @@
"Zero-CD"
mode to modem mode.
This behavior can be disabled by setting
-*hw.usb.uhso.auto\_switch*
+*hw.usb.uhso.auto_switch*
to 0 using
sysctl(8).
@@ -2609,7 +2609,7 @@
The following cards are among those supported by the
-**ath\_hal**
+**ath_hal**
module:
*Card* Chip Bus Standard
@@ -3044,7 +3044,7 @@
The
-**rtwn\_pci**
+**rtwn_pci**
driver supports the following PCIe Wi-Fi devices:
* Realtek 802.11n wireless 8188 (RTL8188EE)
@@ -3053,7 +3053,7 @@
The
-**rtwn\_usb**
+**rtwn_usb**
driver supports USB wireless network adapters based on certain
Realtek RTL 8188/8192/8812 and 8821 chipsets, including:
@@ -3436,7 +3436,7 @@
See
usbconfig(8)
and
-usb\_quirk(4).
+usb_quirk(4).
[[serial]]
@@ -3530,7 +3530,7 @@
The
-**snd\_als4000**
+**snd_als4000**
driver supports the following sound cards:
* Avance Logic ALS4000
@@ -3538,7 +3538,7 @@
The
-**snd\_atiixp**
+**snd_atiixp**
driver supports the following audio chipsets:
* ATI IXP 200
@@ -3548,7 +3548,7 @@
The
-**snd\_cmi**
+**snd_cmi**
driver supports the following sound cards:
* CMedia CMI8338A
@@ -3559,7 +3559,7 @@
The
-**snd\_cs4281**
+**snd_cs4281**
driver supports the following sound cards:
* Crystal Semiconductor CS4281
@@ -3567,7 +3567,7 @@
The
-**snd\_csa**
+**snd_csa**
driver supports the following sound cards:
* Crystal Semiconductor CS4280
@@ -3586,14 +3586,14 @@
instead of the CS4297 AC97 codec.
Such configurations are not
supported by the
-**snd\_csa**
+**snd_csa**
driver yet.
The
-**snd\_emu10k1**
+**snd_emu10k1**
driver supports the following sound cards:
* Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -3604,7 +3604,7 @@
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver supports the following sound cards:
* Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -3621,7 +3621,7 @@
There is no MIDI support for this card.
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver does
*not*
support the following sound cards (although they have names
@@ -3641,7 +3641,7 @@
The
-**snd\_envy24**
+**snd_envy24**
driver supports the following audio devices:
* M-Audio Audiophile 2496
@@ -3654,7 +3654,7 @@
The
-**snd\_envy24ht**
+**snd_envy24ht**
driver supports the following audio devices:
* Audiotrak Prodigy 7.1
@@ -3678,7 +3678,7 @@
The
-**snd\_es137x**
+**snd_es137x**
driver supports the following sound cards:
* Creative CT5880-A
@@ -3697,7 +3697,7 @@
The
-**snd\_fm801**
+**snd_fm801**
driver supports audio devices based on the following chipset:
* Forte Media FM801
@@ -3706,12 +3706,12 @@
The
-**snd\_hda**
+**snd_hda**
driver supports controllers having PCI class 4 (multimedia) and
subclass 3 (HDA), compatible with Intel HDA specification.
The
-**snd\_hda**
+**snd_hda**
driver supports more than two hundred different controllers and CODECs.
There is no sense to list all of them here, as in most cases specific CODEC
configuration and wiring are more important then type of the CODEC itself.
@@ -3719,7 +3719,7 @@
The
-**snd\_hdspe**
+**snd_hdspe**
driver supports the following audio devices:
* RME HDSPe AIO
@@ -3735,7 +3735,7 @@
The
-**snd\_ich**
+**snd_ich**
driver supports the following audio devices:
* AMD 768
@@ -3761,7 +3761,7 @@
The
-**snd\_maestro3**
+**snd_maestro3**
driver supports the following audio devices:
* ESS Technology Allegro-1
@@ -3771,7 +3771,7 @@
The
-**snd\_neomagic**
+**snd_neomagic**
driver supports the following audio devices:
* NeoMagic 256AV
@@ -3781,7 +3781,7 @@
The
-**snd\_solo**
+**snd_solo**
driver supports the following sound cards:
* ESS Solo-1 (ES1938 Chipset)
@@ -3790,7 +3790,7 @@
The
-**snd\_spicds**
+**snd_spicds**
driver supports the following codecs:
* AK4358
@@ -3803,7 +3803,7 @@
The
-**snd\_t4dwave**
+**snd_t4dwave**
driver supports the following audio devices:
* Acer Labs M5451
@@ -3814,7 +3814,7 @@
The
-**snd\_via8233**
+**snd_via8233**
driver supports the following audio chipsets:
* VIA VT8233
@@ -3827,7 +3827,7 @@
The
-**snd\_via82c686**
+**snd_via82c686**
driver supports audio devices based on the following chipset:
* VIA 82C686A
@@ -3835,7 +3835,7 @@
The
-**snd\_vibes**
+**snd_vibes**
driver supports audio devices based on the following chipset:
* S3 SonicVibes
@@ -4363,7 +4363,7 @@
The
-**ng\_ubt**
+**ng_ubt**
driver supports all Bluetooth USB devices that conform with
the Bluetooth specification v1.1, including:
@@ -4609,14 +4609,14 @@
The current version of the
-**netfpga10g\_nf10bmac**
+**netfpga10g_nf10bmac**
driver works with one PIO mode interface of the
NetFPGA-10G Embedded CPU Ethernet Core version 1.00a.
The following PLX/Avago/Broadcom chips are supported by the
-**ntb\_hw\_plx**
+**ntb_hw_plx**
driver:
* PEX 8713
@@ -4630,7 +4630,7 @@
These temperature sensors are supported by the
-**ow\_temp**
+**ow_temp**
driver:
DS1820
diff --git a/website/content/en/releases/14.3R/hardware.adoc b/website/content/en/releases/14.3R/hardware.adoc
--- a/website/content/en/releases/14.3R/hardware.adoc
+++ b/website/content/en/releases/14.3R/hardware.adoc
@@ -1058,7 +1058,7 @@
**mrsas**
driver supports the following hardware:
-\[ Thunderbolt 6Gb/s MR controller ]
+[ Thunderbolt 6Gb/s MR controller ]
* LSI MegaRAID SAS 9265
* LSI MegaRAID SAS 9266
@@ -1071,7 +1071,7 @@
* DELL PERC H810
* DELL PERC H710/P
-\[ Invader/Fury 12Gb/s MR controller ]
+[ Invader/Fury 12Gb/s MR controller ]
* LSI MegaRAID SAS 9380
* LSI MegaRAID SAS 9361
@@ -1118,7 +1118,7 @@
The
-**ocs\_fc**
+**ocs_fc**
driver supports these Fibre Channel adapters:
Emulex 16/8G FC GEN 5 HBAS
@@ -1344,7 +1344,7 @@
**aue**
driver include:
-* Abocom UFE1000, DSB650TX\_NA
+* Abocom UFE1000, DSB650TX_NA
* Accton USB320-EC, SpeedStream
* ADMtek AN986, AN8511
* Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1382,10 +1382,10 @@
* Billionton SnapPort
* Billionton USB2AR
* Buffalo (Melco Inc.) LUA-U2-KTX
-* Corega USB2\_TX
+* Corega USB2_TX
* D-Link DUBE100
* Goodway GWUSB2E
-* JVC MP\_PRX1
+* JVC MP_PRX1
* LinkSys USB200M
* Netgear FA120
* Sitecom LN-029
@@ -2499,7 +2499,7 @@
"Zero-CD"
mode to modem mode.
This behavior can be disabled by setting
-*hw.usb.uhso.auto\_switch*
+*hw.usb.uhso.auto_switch*
to 0 using
sysctl(8).
@@ -2681,7 +2681,7 @@
The following cards are among those supported by the
-**ath\_hal**
+**ath_hal**
module:
*Card* Chip Bus Standard
@@ -3126,7 +3126,7 @@
The
-**rtwn\_pci**
+**rtwn_pci**
driver supports the following PCIe Wi-Fi devices:
* Realtek 802.11n wireless 8188 (RTL8188EE)
@@ -3135,7 +3135,7 @@
The
-**rtwn\_usb**
+**rtwn_usb**
driver supports USB wireless network adapters based on certain
Realtek RTL 8188/8192/8812 and 8821 chipsets, including:
@@ -3545,7 +3545,7 @@
PCI multi-port serial and parallel adapters:
* Sunix SUN1889
-* HP Diva Serial \[GSP] Multiport UART:
+* HP Diva Serial [GSP] Multiport UART:
- Tosca Console
- Tosca Secondary
@@ -3881,7 +3881,7 @@
The
-**snd\_als4000**
+**snd_als4000**
driver supports the following sound cards:
* Avance Logic ALS4000
@@ -3889,7 +3889,7 @@
The
-**snd\_atiixp**
+**snd_atiixp**
driver supports the following audio chipsets:
* ATI IXP 200
@@ -3899,7 +3899,7 @@
The
-**snd\_cmi**
+**snd_cmi**
driver supports the following sound cards:
* CMedia CMI8338A
@@ -3910,7 +3910,7 @@
The
-**snd\_cs4281**
+**snd_cs4281**
driver supports the following sound cards:
* Crystal Semiconductor CS4281
@@ -3918,7 +3918,7 @@
The
-**snd\_csa**
+**snd_csa**
driver supports the following sound cards:
* Crystal Semiconductor CS4280
@@ -3937,14 +3937,14 @@
instead of the CS4297 AC97 codec.
Such configurations are not
supported by the
-**snd\_csa**
+**snd_csa**
driver yet.
The
-**snd\_emu10k1**
+**snd_emu10k1**
driver supports the following sound cards:
* Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -3955,7 +3955,7 @@
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver supports the following sound cards:
* Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -3972,7 +3972,7 @@
There is no MIDI support for this card.
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver does
*not*
support the following sound cards (although they have names
@@ -3992,7 +3992,7 @@
The
-**snd\_envy24**
+**snd_envy24**
driver supports the following audio devices:
* M-Audio Audiophile 2496
@@ -4005,7 +4005,7 @@
The
-**snd\_envy24ht**
+**snd_envy24ht**
driver supports the following audio devices:
* Audiotrak Prodigy 7.1
@@ -4029,7 +4029,7 @@
The
-**snd\_es137x**
+**snd_es137x**
driver supports the following sound cards:
* Creative CT5880-A
@@ -4048,7 +4048,7 @@
The
-**snd\_fm801**
+**snd_fm801**
driver supports audio devices based on the following chipset:
* Forte Media FM801
@@ -4057,12 +4057,12 @@
The
-**snd\_hda**
+**snd_hda**
driver supports controllers having PCI class 4 (multimedia) and
subclass 3 (HDA), compatible with Intel HDA specification.
The
-**snd\_hda**
+**snd_hda**
driver supports more than two hundred different controllers and CODECs.
There is no sense to list all of them here, as in most cases specific CODEC
configuration and wiring are more important then type of the CODEC itself.
@@ -4070,7 +4070,7 @@
The
-**snd\_hdspe**
+**snd_hdspe**
driver supports the following audio devices:
* RME HDSPe AIO
@@ -4086,7 +4086,7 @@
The
-**snd\_ich**
+**snd_ich**
driver supports the following audio devices:
* AMD 768
@@ -4112,7 +4112,7 @@
The
-**snd\_maestro3**
+**snd_maestro3**
driver supports the following audio devices:
* ESS Technology Allegro-1
@@ -4122,7 +4122,7 @@
The
-**snd\_neomagic**
+**snd_neomagic**
driver supports the following audio devices:
* NeoMagic 256AV
@@ -4132,7 +4132,7 @@
The
-**snd\_solo**
+**snd_solo**
driver supports the following sound cards:
* ESS Solo-1 (ES1938 Chipset)
@@ -4141,7 +4141,7 @@
The
-**snd\_spicds**
+**snd_spicds**
driver supports the following codecs:
* AK4358
@@ -4154,7 +4154,7 @@
The
-**snd\_t4dwave**
+**snd_t4dwave**
driver supports the following audio devices:
* Acer Labs M5451
@@ -4165,7 +4165,7 @@
The
-**snd\_via8233**
+**snd_via8233**
driver supports the following audio chipsets:
* VIA VT8233
@@ -4178,7 +4178,7 @@
The
-**snd\_via82c686**
+**snd_via82c686**
driver supports audio devices based on the following chipset:
* VIA 82C686A
@@ -4186,7 +4186,7 @@
The
-**snd\_vibes**
+**snd_vibes**
driver supports audio devices based on the following chipset:
* S3 SonicVibes
@@ -4705,7 +4705,7 @@
The
-**ng\_ubt**
+**ng_ubt**
driver supports all Bluetooth USB devices that conform with
the Bluetooth specification v1.1, including:
@@ -4978,14 +4978,14 @@
The current version of the
-**netfpga10g\_nf10bmac**
+**netfpga10g_nf10bmac**
driver works with one PIO mode interface of the
NetFPGA-10G Embedded CPU Ethernet Core version 1.00a.
The following PLX/Avago/Broadcom chips are supported by the
-**ntb\_hw\_plx**
+**ntb_hw_plx**
driver:
* PEX 8713
@@ -4999,7 +4999,7 @@
These temperature sensors are supported by the
-**ow\_temp**
+**ow_temp**
driver:
DS1820
diff --git a/website/content/en/releases/14.4R/hardware.adoc b/website/content/en/releases/14.4R/hardware.adoc
--- a/website/content/en/releases/14.4R/hardware.adoc
+++ b/website/content/en/releases/14.4R/hardware.adoc
@@ -3583,7 +3583,7 @@
PCI multi-port serial and parallel adapters:
* Sunix SUN1889
-* HP Diva Serial \[GSP] Multiport UART:
+* HP Diva Serial [GSP] Multiport UART:
- Tosca Console
- Tosca Secondary
diff --git a/website/content/en/releases/14.5R/hardware.adoc b/website/content/en/releases/14.5R/hardware.adoc
--- a/website/content/en/releases/14.5R/hardware.adoc
+++ b/website/content/en/releases/14.5R/hardware.adoc
@@ -1139,7 +1139,7 @@
The
-**ocs\_fc**
+**ocs_fc**
driver supports these Fibre Channel adapters:
Emulex 16/8G FC GEN 5 HBAS
@@ -1369,7 +1369,7 @@
driver supports the following USB Fast Ethernet adapters based on the
ADMtek AN986 Pegasus chipset:
-* Abocom UFE1000, DSB650TX\_NA
+* Abocom UFE1000, DSB650TX_NA
* Accton USB320-EC, SpeedStream
* ADMtek AN986, AN8511
* Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1407,10 +1407,10 @@
* Billionton SnapPort
* Billionton USB2AR
* Buffalo (Melco Inc.) LUA-U2-KTX
-* Corega USB2\_TX
+* Corega USB2_TX
* D-Link DUBE100
* Goodway GWUSB2E
-* JVC MP\_PRX1
+* JVC MP_PRX1
* LinkSys USB200M
* Netgear FA120
* Sitecom LN-029
@@ -2539,7 +2539,7 @@
"Zero-CD"
mode to modem mode.
This behavior can be disabled by setting
-*hw.usb.uhso.auto\_switch*
+*hw.usb.uhso.auto_switch*
to 0 using
sysctl(8).
@@ -2642,7 +2642,7 @@
The
-**ar40xx\_switch**
+**ar40xx_switch**
driver supports the following Gigabit Ethernet switch controllers:
* Qualcomm IPQ 4019 Five-port Gigabit Ethernet Switch
@@ -2727,7 +2727,7 @@
The following cards are among those supported by the
-**ath\_hal**
+**ath_hal**
module:
*Card* Chip Bus Standard
@@ -3173,7 +3173,7 @@
The
-**rtwn\_pci**
+**rtwn_pci**
driver supports the following PCIe Wi-Fi devices:
* Realtek 802.11n wireless 8188 (RTL8188EE)
@@ -3182,7 +3182,7 @@
The
-**rtwn\_usb**
+**rtwn_usb**
driver supports USB wireless network adapters based on certain
Realtek RTL 8188/8192/8812 and 8821 chipsets, including:
@@ -3591,7 +3591,7 @@
PCI multi-port serial and parallel adapters:
* Sunix SUN1889
-* HP Diva Serial \[GSP] Multiport UART:
+* HP Diva Serial [GSP] Multiport UART:
- Tosca Console
- Tosca Secondary
@@ -4144,7 +4144,7 @@
The
-**snd\_als4000**
+**snd_als4000**
driver supports the following sound cards:
* Avance Logic ALS4000
@@ -4152,7 +4152,7 @@
The
-**snd\_atiixp**
+**snd_atiixp**
driver supports the following audio chipsets:
* ATI IXP 200
@@ -4162,7 +4162,7 @@
The
-**snd\_cmi**
+**snd_cmi**
driver supports the following sound cards:
* CMedia CMI8338A
@@ -4173,7 +4173,7 @@
The
-**snd\_cs4281**
+**snd_cs4281**
driver supports the following sound cards:
* Crystal Semiconductor CS4281
@@ -4181,7 +4181,7 @@
The
-**snd\_csa**
+**snd_csa**
driver supports the following sound cards:
* Crystal Semiconductor CS4280
@@ -4200,13 +4200,13 @@
instead of the CS4297 AC97 codec.
Such configurations are not
supported by the
-**snd\_csa**
+**snd_csa**
driver yet.
The
-**snd\_emu10k1**
+**snd_emu10k1**
driver supports the following sound cards:
* Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -4217,7 +4217,7 @@
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver supports the following sound cards:
* Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -4234,7 +4234,7 @@
There is no MIDI support for this card.
The
-**snd\_emu10kx**
+**snd_emu10kx**
driver does
*not*
support the following sound cards (although they have names
@@ -4254,7 +4254,7 @@
The
-**snd\_envy24**
+**snd_envy24**
driver supports the following audio devices:
* M-Audio Audiophile 2496
@@ -4267,7 +4267,7 @@
The
-**snd\_envy24ht**
+**snd_envy24ht**
driver supports the following audio devices:
* Audiotrak Prodigy 7.1
@@ -4291,7 +4291,7 @@
The
-**snd\_es137x**
+**snd_es137x**
driver supports the following sound cards:
* Creative CT5880-A
@@ -4309,7 +4309,7 @@
The
-**snd\_fm801**
+**snd_fm801**
driver supports audio devices based on the following chipset:
* Forte Media FM801
@@ -4317,7 +4317,7 @@
The
-**snd\_hda**
+**snd_hda**
driver supports PCI class 04h
(multimedia),
subclass 03h
@@ -4328,7 +4328,7 @@
The
-**snd\_hdspe**
+**snd_hdspe**
driver supports the following audio devices:
* RME HDSPe AIO
@@ -4344,7 +4344,7 @@
The
-**snd\_ich**
+**snd_ich**
driver supports the following audio devices:
* AMD 768
@@ -4369,7 +4369,7 @@
The
-**snd\_maestro3**
+**snd_maestro3**
driver supports the following audio devices:
* ESS Technology Allegro-1
@@ -4378,7 +4378,7 @@
The
-**snd\_neomagic**
+**snd_neomagic**
driver supports the following audio devices:
* NeoMagic 256AV
@@ -4387,7 +4387,7 @@
The
-**snd\_solo**
+**snd_solo**
driver supports the following sound cards:
* ESS Solo-1 (ES1938 Chipset)
@@ -4396,7 +4396,7 @@
The
-**snd\_spicds**
+**snd_spicds**
driver supports the following codecs:
* AK4358
@@ -4409,7 +4409,7 @@
The
-**snd\_t4dwave**
+**snd_t4dwave**
driver supports the following audio devices:
* Acer Labs M5451
@@ -4421,7 +4421,7 @@
The
-**snd\_via8233**
+**snd_via8233**
driver supports the following audio chipsets:
* VIA VT8233
@@ -4434,7 +4434,7 @@
The
-**snd\_via82c686**
+**snd_via82c686**
driver supports audio devices based on the following chipset:
* VIA 82C686A
@@ -4442,7 +4442,7 @@
The
-**snd\_vibes**
+**snd_vibes**
driver supports audio devices based on the following chipset:
* S3 SonicVibes
@@ -4603,17 +4603,17 @@
See the
*USB Mass Sotrage quirks*
section of
-usb\_quirk(4)
+usb_quirk(4)
for quirks for the drives.
The
-**add\_dev\_quirk\_vplh**
+**add_dev_quirk_vplh**
and
-**add\_quirk**
+**add_quirk**
commands of
usbconfig(8)
can manage these dynamically.
Quirks can be specified via tuables, as described in
-usb\_quirk(4).
+usb_quirk(4).
@@ -4773,7 +4773,7 @@
The
-**ng\_ubt**
+**ng_ubt**
driver supports all Bluetooth USB devices that conform with
the Bluetooth specification v1.1, including:
@@ -5042,14 +5042,14 @@
The current version of the
-**netfpga10g\_nf10bmac**
+**netfpga10g_nf10bmac**
driver works with one PIO mode interface of the
NetFPGA-10G Embedded CPU Ethernet Core version 1.00a.
The following PLX/Avago/Broadcom chips are supported by the
-**ntb\_hw\_plx**
+**ntb_hw_plx**
driver:
* PEX 8713
@@ -5063,7 +5063,7 @@
These temperature sensors are supported by the
-**ow\_temp**
+**ow_temp**
driver:
DS1820
diff --git a/website/content/en/releases/15.0R/hardware.adoc b/website/content/en/releases/15.0R/hardware.adoc
--- a/website/content/en/releases/15.0R/hardware.adoc
+++ b/website/content/en/releases/15.0R/hardware.adoc
@@ -3737,7 +3737,7 @@
- XR17V358
* Feasso PCI FPP-02 2S1P
-* HP Diva Serial \[GSP] Multiport UART:
+* HP Diva Serial [GSP] Multiport UART:
- Tosca Console
- Tosca Secondary
diff --git a/website/content/en/releases/15.1R/hardware.adoc b/website/content/en/releases/15.1R/hardware.adoc
--- a/website/content/en/releases/15.1R/hardware.adoc
+++ b/website/content/en/releases/15.1R/hardware.adoc
@@ -3765,7 +3765,7 @@
- XR17V358
* Feasso PCI FPP-02 2S1P
-* HP Diva Serial \[GSP] Multiport UART:
+* HP Diva Serial [GSP] Multiport UART:
- Tosca Console
- Tosca Secondary
@@ -5025,7 +5025,7 @@
The
-**ow\_temp**
+**ow_temp**
driver supports the following temperature sensors:
DS1820 1-Wire Digital Thermometer

File Metadata

Mime Type
text/plain
Expires
Sat, Jun 13, 11:26 PM (11 h, 11 s)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
33936086
Default Alt Text
D56681.diff (51 KB)

Event Timeline