Page MenuHomeFreeBSD
Files F153859430

D3238.id7687.diff
No OneTemporary
Actions

D3238.id7687.diff
View Options

Index: head/UPDATING
===================================================================
--- head/UPDATING
+++ head/UPDATING
@@ -31,6 +31,11 @@
disable the most expensive debugging functionality run
"ln -s 'abort:false,junk:false' /etc/malloc.conf".)
+20150805:
+ GNU Binutils versions of addr2line, c++filt, nm, readelf, size,
+ strings and strip have been removed. The src.conf(5) knob
+ WITHOUT_ELFTOOLCHAIN_TOOLS no longer provides the binutils tools.
+
20150728:
As ZFS requires more kernel stack pages than is the default on some
architectures e.g. i386, it now warns if KSTACK_PAGES is less than
@@ -224,7 +229,7 @@
taken from the ELF Tool Chain project rather than GNU binutils. They
should be drop-in replacements, with the addition of arm64 support.
The WITHOUT_ELFTOOLCHAIN_TOOLS= knob may be used to obtain the
- binutils tools, if necessary.
+ binutils tools, if necessary. See 20150805 for updated information.
20150105:
The default Unbound configuration now enables remote control
Index: head/gnu/usr.bin/binutils/Makefile
===================================================================
--- head/gnu/usr.bin/binutils/Makefile
+++ head/gnu/usr.bin/binutils/Makefile
@@ -7,25 +7,11 @@
libbfd \
libopcodes \
libbinutils \
- ${_addr2line} \
as \
ld \
- ${_nm} \
${_objcopy} \
objdump \
- ${_readelf} \
- ${_size} \
- ${_strings} \
- ${_strip}
-.if ${MK_ELFTOOLCHAIN_TOOLS} == "no"
-_addr2line= addr2line
-_nm= nm
-_readelf= readelf
-_size= size
-_strings= strings
-_strip= strip
-.endif
.if ${MK_ELFTOOLCHAIN_TOOLS} == "no" || ${MK_ELFCOPY_AS_OBJCOPY} == "no"
_objcopy= objcopy
.endif
Index: head/gnu/usr.bin/binutils/addr2line/Makefile
===================================================================
--- head/gnu/usr.bin/binutils/addr2line/Makefile
+++ head/gnu/usr.bin/binutils/addr2line/Makefile
@@ -1,17 +0,0 @@
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc
-
-PROG= addr2line
-SRCS= addr2line.c
-CFLAGS+= -D_GNU_SOURCE
-CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils
-CFLAGS+= -I${SRCDIR}/binutils
-DPADD= ${RELTOP}/libbinutils/libbinutils.a
-DPADD+= ${RELTOP}/libbfd/libbfd.a
-DPADD+= ${RELTOP}/libiberty/libiberty.a
-LDADD= ${DPADD}
-
-.include <bsd.prog.mk>
Index: head/gnu/usr.bin/binutils/addr2line/Makefile.depend
===================================================================
--- head/gnu/usr.bin/binutils/addr2line/Makefile.depend
+++ head/gnu/usr.bin/binutils/addr2line/Makefile.depend
@@ -1,21 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DIRDEPS = \
- gnu/lib/csu \
- gnu/lib/libgcc \
- gnu/usr.bin/binutils/libbfd \
- gnu/usr.bin/binutils/libbinutils \
- gnu/usr.bin/binutils/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/gnu/usr.bin/binutils/addr2line/addr2line.1
===================================================================
--- head/gnu/usr.bin/binutils/addr2line/addr2line.1
+++ head/gnu/usr.bin/binutils/addr2line/addr2line.1
@@ -1,266 +0,0 @@
-.\" $FreeBSD$
-.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14)
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. \*(C+ will
-.\" give a nicer C++. Capital omega is used to do unbreakable dashes and
-.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
-.\" nothing in troff, for use with C<>.
-.tr \(*W-
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" Escape single quotes in literal strings from groff's Unicode transform.
-.ie \n(.g .ds Aq \(aq
-.el .ds Aq '
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
-.\" entries marked with X<> in POD. Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.ie \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.el \{\
-. de IX
-..
-.\}
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "ADDR2LINE 1"
-.TH ADDR2LINE 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools"
-.\" For nroff, turn off justification. Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.if n .ad l
-.nh
-.SH "NAME"
-addr2line \- convert addresses into file names and line numbers
-.SH "SYNOPSIS"
-.IX Header "SYNOPSIS"
-addr2line [\fB\-b\fR \fIbfdname\fR|\fB\-\-target=\fR\fIbfdname\fR]
- [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR]]
- [\fB\-e\fR \fIfilename\fR|\fB\-\-exe=\fR\fIfilename\fR]
- [\fB\-f\fR|\fB\-\-functions\fR] [\fB\-s\fR|\fB\-\-basename\fR]
- [\fB\-i\fR|\fB\-\-inlines\fR]
- [\fB\-j\fR|\fB\-\-section=\fR\fIname\fR]
- [\fB\-H\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR]
- [addr addr ...]
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-\&\fBaddr2line\fR translates addresses into file names and line numbers.
-Given an address in an executable or an offset in a section of a relocatable
-object, it uses the debugging information to figure out which file name and
-line number are associated with it.
-.PP
-The executable or relocatable object to use is specified with the \fB\-e\fR
-option. The default is the file \fIa.out\fR. The section in the relocatable
-object to use is specified with the \fB\-j\fR option.
-.PP
-\&\fBaddr2line\fR has two modes of operation.
-.PP
-In the first, hexadecimal addresses are specified on the command line,
-and \fBaddr2line\fR displays the file name and line number for each
-address.
-.PP
-In the second, \fBaddr2line\fR reads hexadecimal addresses from
-standard input, and prints the file name and line number for each
-address on standard output. In this mode, \fBaddr2line\fR may be used
-in a pipe to convert dynamically chosen addresses.
-.PP
-The format of the output is \fB\s-1FILENAME:LINENO\s0\fR. The file name and
-line number for each address is printed on a separate line. If the
-\&\fB\-f\fR option is used, then each \fB\s-1FILENAME:LINENO\s0\fR line is
-preceded by a \fB\s-1FUNCTIONNAME\s0\fR line which is the name of the function
-containing the address.
-.PP
-If the file name or function name can not be determined,
-\&\fBaddr2line\fR will print two question marks in their place. If the
-line number can not be determined, \fBaddr2line\fR will print 0.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-The long and short forms of options, shown here as alternatives, are
-equivalent.
-.IP "\fB\-b\fR \fIbfdname\fR" 4
-.IX Item "-b bfdname"
-.PD 0
-.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
-.IX Item "--target=bfdname"
-.PD
-Specify that the object-code format for the object files is
-\&\fIbfdname\fR.
-.IP "\fB\-C\fR" 4
-.IX Item "-C"
-.PD 0
-.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4
-.IX Item "--demangle[=style]"
-.PD
-Decode (\fIdemangle\fR) low-level symbol names into user-level names.
-Besides removing any initial underscore prepended by the system, this
-makes \*(C+ function names readable. Different compilers have different
-mangling styles. The optional demangling style argument can be used to
-choose an appropriate demangling style for your compiler.
-.IP "\fB\-e\fR \fIfilename\fR" 4
-.IX Item "-e filename"
-.PD 0
-.IP "\fB\-\-exe=\fR\fIfilename\fR" 4
-.IX Item "--exe=filename"
-.PD
-Specify the name of the executable for which addresses should be
-translated. The default file is \fIa.out\fR.
-.IP "\fB\-f\fR" 4
-.IX Item "-f"
-.PD 0
-.IP "\fB\-\-functions\fR" 4
-.IX Item "--functions"
-.PD
-Display function names as well as file and line number information.
-.IP "\fB\-s\fR" 4
-.IX Item "-s"
-.PD 0
-.IP "\fB\-\-basenames\fR" 4
-.IX Item "--basenames"
-.PD
-Display only the base of each file name.
-.IP "\fB\-i\fR" 4
-.IX Item "-i"
-.PD 0
-.IP "\fB\-\-inlines\fR" 4
-.IX Item "--inlines"
-.PD
-If the address belongs to a function that was inlined, the source
-information for all enclosing scopes back to the first non-inlined
-function will also be printed. For example, if \f(CW\*(C`main\*(C'\fR inlines
-\&\f(CW\*(C`callee1\*(C'\fR which inlines \f(CW\*(C`callee2\*(C'\fR, and address is from
-\&\f(CW\*(C`callee2\*(C'\fR, the source information for \f(CW\*(C`callee1\*(C'\fR and \f(CW\*(C`main\*(C'\fR
-will also be printed.
-.IP "\fB\-j\fR" 4
-.IX Item "-j"
-.PD 0
-.IP "\fB\-\-section\fR" 4
-.IX Item "--section"
-.PD
-Read offsets relative to the specified section instead of absolute addresses.
-.IP "\fB@\fR\fIfile\fR" 4
-.IX Item "@file"
-Read command-line options from \fIfile\fR. The options read are
-inserted in place of the original @\fIfile\fR option. If \fIfile\fR
-does not exist, or cannot be read, then the option will be treated
-literally, and not removed.
-.Sp
-Options in \fIfile\fR are separated by whitespace. A whitespace
-character may be included in an option by surrounding the entire
-option in either single or double quotes. Any character (including a
-backslash) may be included by prefixing the character to be included
-with a backslash. The \fIfile\fR may itself contain additional
-@\fIfile\fR options; any such options will be processed recursively.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-Info entries for \fIbinutils\fR.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no Front-Cover Texts, and with no
-Back-Cover Texts. A copy of the license is included in the
-section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
Index: head/gnu/usr.bin/binutils/ar/Makefile.depend
===================================================================
--- head/gnu/usr.bin/binutils/ar/Makefile.depend
+++ head/gnu/usr.bin/binutils/ar/Makefile.depend
@@ -1,21 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DEP_RELDIR := ${_PARSEDIR:S,${SRCTOP}/,,}
-
-DIRDEPS = \
- gnu/usr.bin/binutils/libbfd \
- gnu/usr.bin/binutils/libbinutils \
- gnu/usr.bin/binutils/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/gnu/usr.bin/binutils/nm/Makefile
===================================================================
--- head/gnu/usr.bin/binutils/nm/Makefile
+++ head/gnu/usr.bin/binutils/nm/Makefile
@@ -1,18 +0,0 @@
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc
-
-PROG= nm
-SRCS= nm.c
-CFLAGS+= -D_GNU_SOURCE
-CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils
-CFLAGS+= -I${SRCDIR}/bfd
-CFLAGS+= -I${SRCDIR}/binutils
-DPADD= ${RELTOP}/libbinutils/libbinutils.a
-DPADD+= ${RELTOP}/libbfd/libbfd.a
-DPADD+= ${RELTOP}/libiberty/libiberty.a
-LDADD= ${DPADD}
-
-.include <bsd.prog.mk>
Index: head/gnu/usr.bin/binutils/nm/Makefile.depend
===================================================================
--- head/gnu/usr.bin/binutils/nm/Makefile.depend
+++ head/gnu/usr.bin/binutils/nm/Makefile.depend
@@ -1,21 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DIRDEPS = \
- gnu/lib/csu \
- gnu/lib/libgcc \
- gnu/usr.bin/binutils/libbfd \
- gnu/usr.bin/binutils/libbinutils \
- gnu/usr.bin/binutils/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/gnu/usr.bin/binutils/nm/nm.1
===================================================================
--- head/gnu/usr.bin/binutils/nm/nm.1
+++ head/gnu/usr.bin/binutils/nm/nm.1
@@ -1,450 +0,0 @@
-.\" $FreeBSD$
-.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14)
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. \*(C+ will
-.\" give a nicer C++. Capital omega is used to do unbreakable dashes and
-.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
-.\" nothing in troff, for use with C<>.
-.tr \(*W-
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" Escape single quotes in literal strings from groff's Unicode transform.
-.ie \n(.g .ds Aq \(aq
-.el .ds Aq '
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
-.\" entries marked with X<> in POD. Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.ie \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.el \{\
-. de IX
-..
-.\}
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "NM 1"
-.TH NM 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools"
-.\" For nroff, turn off justification. Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.if n .ad l
-.nh
-.SH "NAME"
-nm \- list symbols from object files
-.SH "SYNOPSIS"
-.IX Header "SYNOPSIS"
-nm [\fB\-a\fR|\fB\-\-debug\-syms\fR] [\fB\-g\fR|\fB\-\-extern\-only\fR]
- [\fB\-B\fR] [\fB\-C\fR|\fB\-\-demangle\fR[=\fIstyle\fR]] [\fB\-D\fR|\fB\-\-dynamic\fR]
- [\fB\-S\fR|\fB\-\-print\-size\fR] [\fB\-s\fR|\fB\-\-print\-armap\fR]
- [\fB\-A\fR|\fB\-o\fR|\fB\-\-print\-file\-name\fR][\fB\-\-special\-syms\fR]
- [\fB\-n\fR|\fB\-v\fR|\fB\-\-numeric\-sort\fR] [\fB\-p\fR|\fB\-\-no\-sort\fR]
- [\fB\-r\fR|\fB\-\-reverse\-sort\fR] [\fB\-\-size\-sort\fR] [\fB\-u\fR|\fB\-\-undefined\-only\fR]
- [\fB\-t\fR \fIradix\fR|\fB\-\-radix=\fR\fIradix\fR] [\fB\-P\fR|\fB\-\-portability\fR]
- [\fB\-\-target=\fR\fIbfdname\fR] [\fB\-f\fR\fIformat\fR|\fB\-\-format=\fR\fIformat\fR]
- [\fB\-\-defined\-only\fR] [\fB\-l\fR|\fB\-\-line\-numbers\fR] [\fB\-\-no\-demangle\fR]
- [\fB\-V\fR|\fB\-\-version\fR] [\fB\-X 32_64\fR] [\fB\-\-help\fR] [\fIobjfile\fR...]
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-\&\s-1GNU\s0 \fBnm\fR lists the symbols from object files \fIobjfile\fR....
-If no object files are listed as arguments, \fBnm\fR assumes the file
-\&\fIa.out\fR.
-.PP
-For each symbol, \fBnm\fR shows:
-.IP "\(bu" 4
-The symbol value, in the radix selected by options (see below), or
-hexadecimal by default.
-.IP "\(bu" 4
-The symbol type. At least the following types are used; others are, as
-well, depending on the object file format. If lowercase, the symbol is
-local; if uppercase, the symbol is global (external).
-.RS 4
-.ie n .IP """A""" 4
-.el .IP "\f(CWA\fR" 4
-.IX Item "A"
-The symbol's value is absolute, and will not be changed by further
-linking.
-.ie n .IP """B""" 4
-.el .IP "\f(CWB\fR" 4
-.IX Item "B"
-The symbol is in the uninitialized data section (known as \s-1BSS\s0).
-.ie n .IP """C""" 4
-.el .IP "\f(CWC\fR" 4
-.IX Item "C"
-The symbol is common. Common symbols are uninitialized data. When
-linking, multiple common symbols may appear with the same name. If the
-symbol is defined anywhere, the common symbols are treated as undefined
-references.
-.ie n .IP """D""" 4
-.el .IP "\f(CWD\fR" 4
-.IX Item "D"
-The symbol is in the initialized data section.
-.ie n .IP """G""" 4
-.el .IP "\f(CWG\fR" 4
-.IX Item "G"
-The symbol is in an initialized data section for small objects. Some
-object file formats permit more efficient access to small data objects,
-such as a global int variable as opposed to a large global array.
-.ie n .IP """I""" 4
-.el .IP "\f(CWI\fR" 4
-.IX Item "I"
-The symbol is an indirect reference to another symbol. This is a \s-1GNU\s0
-extension to the a.out object file format which is rarely used.
-.ie n .IP """N""" 4
-.el .IP "\f(CWN\fR" 4
-.IX Item "N"
-The symbol is a debugging symbol.
-.ie n .IP """R""" 4
-.el .IP "\f(CWR\fR" 4
-.IX Item "R"
-The symbol is in a read only data section.
-.ie n .IP """S""" 4
-.el .IP "\f(CWS\fR" 4
-.IX Item "S"
-The symbol is in an uninitialized data section for small objects.
-.ie n .IP """T""" 4
-.el .IP "\f(CWT\fR" 4
-.IX Item "T"
-The symbol is in the text (code) section.
-.ie n .IP """U""" 4
-.el .IP "\f(CWU\fR" 4
-.IX Item "U"
-The symbol is undefined.
-.ie n .IP """V""" 4
-.el .IP "\f(CWV\fR" 4
-.IX Item "V"
-The symbol is a weak object. When a weak defined symbol is linked with
-a normal defined symbol, the normal defined symbol is used with no error.
-When a weak undefined symbol is linked and the symbol is not defined,
-the value of the weak symbol becomes zero with no error.
-.ie n .IP """W""" 4
-.el .IP "\f(CWW\fR" 4
-.IX Item "W"
-The symbol is a weak symbol that has not been specifically tagged as a
-weak object symbol. When a weak defined symbol is linked with a normal
-defined symbol, the normal defined symbol is used with no error.
-When a weak undefined symbol is linked and the symbol is not defined,
-the value of the symbol is determined in a system-specific manner without
-error. On some systems, uppercase indicates that a default value has been
-specified.
-.ie n .IP """\-""" 4
-.el .IP "\f(CW\-\fR" 4
-.IX Item "-"
-The symbol is a stabs symbol in an a.out object file. In this case, the
-next values printed are the stabs other field, the stabs desc field, and
-the stab type. Stabs symbols are used to hold debugging information.
-.ie n .IP """?""" 4
-.el .IP "\f(CW?\fR" 4
-.IX Item "?"
-The symbol type is unknown, or object file format specific.
-.RE
-.RS 4
-.RE
-.IP "\(bu" 4
-The symbol name.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-The long and short forms of options, shown here as alternatives, are
-equivalent.
-.IP "\fB\-A\fR" 4
-.IX Item "-A"
-.PD 0
-.IP "\fB\-o\fR" 4
-.IX Item "-o"
-.IP "\fB\-\-print\-file\-name\fR" 4
-.IX Item "--print-file-name"
-.PD
-Precede each symbol by the name of the input file (or archive member)
-in which it was found, rather than identifying the input file once only,
-before all of its symbols.
-.IP "\fB\-a\fR" 4
-.IX Item "-a"
-.PD 0
-.IP "\fB\-\-debug\-syms\fR" 4
-.IX Item "--debug-syms"
-.PD
-Display all symbols, even debugger-only symbols; normally these are not
-listed.
-.IP "\fB\-B\fR" 4
-.IX Item "-B"
-The same as \fB\-\-format=bsd\fR (for compatibility with the \s-1MIPS\s0 \fBnm\fR).
-.IP "\fB\-C\fR" 4
-.IX Item "-C"
-.PD 0
-.IP "\fB\-\-demangle[=\fR\fIstyle\fR\fB]\fR" 4
-.IX Item "--demangle[=style]"
-.PD
-Decode (\fIdemangle\fR) low-level symbol names into user-level names.
-Besides removing any initial underscore prepended by the system, this
-makes \*(C+ function names readable. Different compilers have different
-mangling styles. The optional demangling style argument can be used to
-choose an appropriate demangling style for your compiler.
-.IP "\fB\-\-no\-demangle\fR" 4
-.IX Item "--no-demangle"
-Do not demangle low-level symbol names. This is the default.
-.IP "\fB\-D\fR" 4
-.IX Item "-D"
-.PD 0
-.IP "\fB\-\-dynamic\fR" 4
-.IX Item "--dynamic"
-.PD
-Display the dynamic symbols rather than the normal symbols. This is
-only meaningful for dynamic objects, such as certain types of shared
-libraries.
-.IP "\fB\-f\fR \fIformat\fR" 4
-.IX Item "-f format"
-.PD 0
-.IP "\fB\-\-format=\fR\fIformat\fR" 4
-.IX Item "--format=format"
-.PD
-Use the output format \fIformat\fR, which can be \f(CW\*(C`bsd\*(C'\fR,
-\&\f(CW\*(C`sysv\*(C'\fR, or \f(CW\*(C`posix\*(C'\fR. The default is \f(CW\*(C`bsd\*(C'\fR.
-Only the first character of \fIformat\fR is significant; it can be
-either upper or lower case.
-.IP "\fB\-g\fR" 4
-.IX Item "-g"
-.PD 0
-.IP "\fB\-\-extern\-only\fR" 4
-.IX Item "--extern-only"
-.PD
-Display only external symbols.
-.IP "\fB\-l\fR" 4
-.IX Item "-l"
-.PD 0
-.IP "\fB\-\-line\-numbers\fR" 4
-.IX Item "--line-numbers"
-.PD
-For each symbol, use debugging information to try to find a filename and
-line number. For a defined symbol, look for the line number of the
-address of the symbol. For an undefined symbol, look for the line
-number of a relocation entry which refers to the symbol. If line number
-information can be found, print it after the other symbol information.
-.IP "\fB\-n\fR" 4
-.IX Item "-n"
-.PD 0
-.IP "\fB\-v\fR" 4
-.IX Item "-v"
-.IP "\fB\-\-numeric\-sort\fR" 4
-.IX Item "--numeric-sort"
-.PD
-Sort symbols numerically by their addresses, rather than alphabetically
-by their names.
-.IP "\fB\-p\fR" 4
-.IX Item "-p"
-.PD 0
-.IP "\fB\-\-no\-sort\fR" 4
-.IX Item "--no-sort"
-.PD
-Do not bother to sort the symbols in any order; print them in the order
-encountered.
-.IP "\fB\-P\fR" 4
-.IX Item "-P"
-.PD 0
-.IP "\fB\-\-portability\fR" 4
-.IX Item "--portability"
-.PD
-Use the \s-1POSIX\s0.2 standard output format instead of the default format.
-Equivalent to \fB\-f posix\fR.
-.IP "\fB\-S\fR" 4
-.IX Item "-S"
-.PD 0
-.IP "\fB\-\-print\-size\fR" 4
-.IX Item "--print-size"
-.PD
-Print size, not the value, of defined symbols for the \f(CW\*(C`bsd\*(C'\fR output format.
-.IP "\fB\-s\fR" 4
-.IX Item "-s"
-.PD 0
-.IP "\fB\-\-print\-armap\fR" 4
-.IX Item "--print-armap"
-.PD
-When listing symbols from archive members, include the index: a mapping
-(stored in the archive by \fBar\fR or \fBranlib\fR) of which modules
-contain definitions for which names.
-.IP "\fB\-r\fR" 4
-.IX Item "-r"
-.PD 0
-.IP "\fB\-\-reverse\-sort\fR" 4
-.IX Item "--reverse-sort"
-.PD
-Reverse the order of the sort (whether numeric or alphabetic); let the
-last come first.
-.IP "\fB\-\-size\-sort\fR" 4
-.IX Item "--size-sort"
-Sort symbols by size. The size is computed as the difference between
-the value of the symbol and the value of the symbol with the next higher
-value. If the \f(CW\*(C`bsd\*(C'\fR output format is used the size of the symbol
-is printed, rather than the value, and \fB\-S\fR must be used in order
-both size and value to be printed.
-.IP "\fB\-\-special\-syms\fR" 4
-.IX Item "--special-syms"
-Display symbols which have a target-specific special meaning. These
-symbols are usually used by the target for some special processing and
-are not normally helpful when included included in the normal symbol
-lists. For example for \s-1ARM\s0 targets this option would skip the mapping
-symbols used to mark transitions between \s-1ARM\s0 code, \s-1THUMB\s0 code and
-data.
-.IP "\fB\-t\fR \fIradix\fR" 4
-.IX Item "-t radix"
-.PD 0
-.IP "\fB\-\-radix=\fR\fIradix\fR" 4
-.IX Item "--radix=radix"
-.PD
-Use \fIradix\fR as the radix for printing the symbol values. It must be
-\&\fBd\fR for decimal, \fBo\fR for octal, or \fBx\fR for hexadecimal.
-.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
-.IX Item "--target=bfdname"
-Specify an object code format other than your system's default format.
-.IP "\fB\-u\fR" 4
-.IX Item "-u"
-.PD 0
-.IP "\fB\-\-undefined\-only\fR" 4
-.IX Item "--undefined-only"
-.PD
-Display only undefined symbols (those external to each object file).
-.IP "\fB\-\-defined\-only\fR" 4
-.IX Item "--defined-only"
-Display only defined symbols for each object file.
-.IP "\fB\-V\fR" 4
-.IX Item "-V"
-.PD 0
-.IP "\fB\-\-version\fR" 4
-.IX Item "--version"
-.PD
-Show the version number of \fBnm\fR and exit.
-.IP "\fB\-X\fR" 4
-.IX Item "-X"
-This option is ignored for compatibility with the \s-1AIX\s0 version of
-\&\fBnm\fR. It takes one parameter which must be the string
-\&\fB32_64\fR. The default mode of \s-1AIX\s0 \fBnm\fR corresponds
-to \fB\-X 32\fR, which is not supported by \s-1GNU\s0 \fBnm\fR.
-.IP "\fB\-\-help\fR" 4
-.IX Item "--help"
-Show a summary of the options to \fBnm\fR and exit.
-.IP "\fB@\fR\fIfile\fR" 4
-.IX Item "@file"
-Read command-line options from \fIfile\fR. The options read are
-inserted in place of the original @\fIfile\fR option. If \fIfile\fR
-does not exist, or cannot be read, then the option will be treated
-literally, and not removed.
-.Sp
-Options in \fIfile\fR are separated by whitespace. A whitespace
-character may be included in an option by surrounding the entire
-option in either single or double quotes. Any character (including a
-backslash) may be included by prefixing the character to be included
-with a backslash. The \fIfile\fR may itself contain additional
-@\fIfile\fR options; any such options will be processed recursively.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-\&\fIar\fR\|(1), \fIobjdump\fR\|(1), \fIranlib\fR\|(1), and the Info entries for \fIbinutils\fR.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no Front-Cover Texts, and with no
-Back-Cover Texts. A copy of the license is included in the
-section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
Index: head/gnu/usr.bin/binutils/ranlib/Makefile.depend
===================================================================
--- head/gnu/usr.bin/binutils/ranlib/Makefile.depend
+++ head/gnu/usr.bin/binutils/ranlib/Makefile.depend
@@ -1,21 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DEP_RELDIR := ${_PARSEDIR:S,${SRCTOP}/,,}
-
-DIRDEPS = \
- gnu/usr.bin/binutils/libbfd \
- gnu/usr.bin/binutils/libbinutils \
- gnu/usr.bin/binutils/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/gnu/usr.bin/binutils/readelf/Makefile
===================================================================
--- head/gnu/usr.bin/binutils/readelf/Makefile
+++ head/gnu/usr.bin/binutils/readelf/Makefile
@@ -1,20 +0,0 @@
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc
-
-# No a.out vs. ELF version so don't install in /usr/libexec/elf
-BINDIR=/usr/bin
-
-PROG= readelf
-SRCS= ${PROG}.c
-CFLAGS+= -D_GNU_SOURCE
-CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils -I${SRCDIR}/binutils
-
-DPADD= ${RELTOP}/libbinutils/libbinutils.a
-DPADD+= ${RELTOP}/libbfd/libbfd.a
-DPADD+= ${RELTOP}/libiberty/libiberty.a
-LDADD= ${DPADD}
-
-.include <bsd.prog.mk>
Index: head/gnu/usr.bin/binutils/readelf/Makefile.depend
===================================================================
--- head/gnu/usr.bin/binutils/readelf/Makefile.depend
+++ head/gnu/usr.bin/binutils/readelf/Makefile.depend
@@ -1,21 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DIRDEPS = \
- gnu/lib/csu \
- gnu/lib/libgcc \
- gnu/usr.bin/binutils/libbfd \
- gnu/usr.bin/binutils/libbinutils \
- gnu/usr.bin/binutils/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/gnu/usr.bin/binutils/readelf/readelf.1
===================================================================
--- head/gnu/usr.bin/binutils/readelf/readelf.1
+++ head/gnu/usr.bin/binutils/readelf/readelf.1
@@ -1,377 +0,0 @@
-.\" $FreeBSD$
-.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14)
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. \*(C+ will
-.\" give a nicer C++. Capital omega is used to do unbreakable dashes and
-.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
-.\" nothing in troff, for use with C<>.
-.tr \(*W-
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" Escape single quotes in literal strings from groff's Unicode transform.
-.ie \n(.g .ds Aq \(aq
-.el .ds Aq '
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
-.\" entries marked with X<> in POD. Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.ie \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.el \{\
-. de IX
-..
-.\}
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "READELF 1"
-.TH READELF 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools"
-.\" For nroff, turn off justification. Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.if n .ad l
-.nh
-.SH "NAME"
-readelf \- Displays information about ELF files.
-.SH "SYNOPSIS"
-.IX Header "SYNOPSIS"
-readelf [\fB\-a\fR|\fB\-\-all\fR]
- [\fB\-h\fR|\fB\-\-file\-header\fR]
- [\fB\-l\fR|\fB\-\-program\-headers\fR|\fB\-\-segments\fR]
- [\fB\-S\fR|\fB\-\-section\-headers\fR|\fB\-\-sections\fR]
- [\fB\-g\fR|\fB\-\-section\-groups\fR]
- [\fB\-t\fR|\fB\-\-section\-details\fR]
- [\fB\-e\fR|\fB\-\-headers\fR]
- [\fB\-s\fR|\fB\-\-syms\fR|\fB\-\-symbols\fR]
- [\fB\-n\fR|\fB\-\-notes\fR]
- [\fB\-r\fR|\fB\-\-relocs\fR]
- [\fB\-u\fR|\fB\-\-unwind\fR]
- [\fB\-d\fR|\fB\-\-dynamic\fR]
- [\fB\-V\fR|\fB\-\-version\-info\fR]
- [\fB\-A\fR|\fB\-\-arch\-specific\fR]
- [\fB\-D\fR|\fB\-\-use\-dynamic\fR]
- [\fB\-x\fR <number or name>|\fB\-\-hex\-dump=\fR<number or name>]
- [\fB\-w[liaprmfFsoR]\fR|
- \fB\-\-debug\-dump\fR[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges]]
- [\fB\-I\fR|\fB\-histogram\fR]
- [\fB\-v\fR|\fB\-\-version\fR]
- [\fB\-W\fR|\fB\-\-wide\fR]
- [\fB\-H\fR|\fB\-\-help\fR]
- \fIelffile\fR...
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-\&\fBreadelf\fR displays information about one or more \s-1ELF\s0 format object
-files. The options control what particular information to display.
-.PP
-\&\fIelffile\fR... are the object files to be examined. 32\-bit and
-64\-bit \s-1ELF\s0 files are supported, as are archives containing \s-1ELF\s0 files.
-.PP
-This program performs a similar function to \fBobjdump\fR but it
-goes into more detail and it exists independently of the \s-1BFD\s0
-library, so if there is a bug in \s-1BFD\s0 then readelf will not be
-affected.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-The long and short forms of options, shown here as alternatives, are
-equivalent. At least one option besides \fB\-v\fR or \fB\-H\fR must be
-given.
-.IP "\fB\-a\fR" 4
-.IX Item "-a"
-.PD 0
-.IP "\fB\-\-all\fR" 4
-.IX Item "--all"
-.PD
-Equivalent to specifying \fB\-\-file\-header\fR,
-\&\fB\-\-program\-headers\fR, \fB\-\-sections\fR, \fB\-\-symbols\fR,
-\&\fB\-\-relocs\fR, \fB\-\-dynamic\fR, \fB\-\-notes\fR and
-\&\fB\-\-version\-info\fR.
-.IP "\fB\-h\fR" 4
-.IX Item "-h"
-.PD 0
-.IP "\fB\-\-file\-header\fR" 4
-.IX Item "--file-header"
-.PD
-Displays the information contained in the \s-1ELF\s0 header at the start of the
-file.
-.IP "\fB\-l\fR" 4
-.IX Item "-l"
-.PD 0
-.IP "\fB\-\-program\-headers\fR" 4
-.IX Item "--program-headers"
-.IP "\fB\-\-segments\fR" 4
-.IX Item "--segments"
-.PD
-Displays the information contained in the file's segment headers, if it
-has any.
-.IP "\fB\-S\fR" 4
-.IX Item "-S"
-.PD 0
-.IP "\fB\-\-sections\fR" 4
-.IX Item "--sections"
-.IP "\fB\-\-section\-headers\fR" 4
-.IX Item "--section-headers"
-.PD
-Displays the information contained in the file's section headers, if it
-has any.
-.IP "\fB\-g\fR" 4
-.IX Item "-g"
-.PD 0
-.IP "\fB\-\-section\-groups\fR" 4
-.IX Item "--section-groups"
-.PD
-Displays the information contained in the file's section groups, if it
-has any.
-.IP "\fB\-t\fR" 4
-.IX Item "-t"
-.PD 0
-.IP "\fB\-\-section\-details\fR" 4
-.IX Item "--section-details"
-.PD
-Displays the detailed section information. Implies \fB\-S\fR.
-.IP "\fB\-s\fR" 4
-.IX Item "-s"
-.PD 0
-.IP "\fB\-\-symbols\fR" 4
-.IX Item "--symbols"
-.IP "\fB\-\-syms\fR" 4
-.IX Item "--syms"
-.PD
-Displays the entries in symbol table section of the file, if it has one.
-.IP "\fB\-e\fR" 4
-.IX Item "-e"
-.PD 0
-.IP "\fB\-\-headers\fR" 4
-.IX Item "--headers"
-.PD
-Display all the headers in the file. Equivalent to \fB\-h \-l \-S\fR.
-.IP "\fB\-n\fR" 4
-.IX Item "-n"
-.PD 0
-.IP "\fB\-\-notes\fR" 4
-.IX Item "--notes"
-.PD
-Displays the contents of the \s-1NOTE\s0 segments and/or sections, if any.
-.IP "\fB\-r\fR" 4
-.IX Item "-r"
-.PD 0
-.IP "\fB\-\-relocs\fR" 4
-.IX Item "--relocs"
-.PD
-Displays the contents of the file's relocation section, if it has one.
-.IP "\fB\-u\fR" 4
-.IX Item "-u"
-.PD 0
-.IP "\fB\-\-unwind\fR" 4
-.IX Item "--unwind"
-.PD
-Displays the contents of the file's unwind section, if it has one. Only
-the unwind sections for \s-1IA64\s0 \s-1ELF\s0 files are currently supported.
-.IP "\fB\-d\fR" 4
-.IX Item "-d"
-.PD 0
-.IP "\fB\-\-dynamic\fR" 4
-.IX Item "--dynamic"
-.PD
-Displays the contents of the file's dynamic section, if it has one.
-.IP "\fB\-V\fR" 4
-.IX Item "-V"
-.PD 0
-.IP "\fB\-\-version\-info\fR" 4
-.IX Item "--version-info"
-.PD
-Displays the contents of the version sections in the file, it they
-exist.
-.IP "\fB\-A\fR" 4
-.IX Item "-A"
-.PD 0
-.IP "\fB\-\-arch\-specific\fR" 4
-.IX Item "--arch-specific"
-.PD
-Displays architecture-specific information in the file, if there
-is any.
-.IP "\fB\-D\fR" 4
-.IX Item "-D"
-.PD 0
-.IP "\fB\-\-use\-dynamic\fR" 4
-.IX Item "--use-dynamic"
-.PD
-When displaying symbols, this option makes \fBreadelf\fR use the
-symbol table in the file's dynamic section, rather than the one in the
-symbols section.
-.IP "\fB\-x <number or name>\fR" 4
-.IX Item "-x <number or name>"
-.PD 0
-.IP "\fB\-\-hex\-dump=<number or name>\fR" 4
-.IX Item "--hex-dump=<number or name>"
-.PD
-Displays the contents of the indicated section as a hexadecimal dump.
-A number identifies a particular section by index in the section table;
-any other string identifies all sections with that name in the object file.
-.IP "\fB\-w[liaprmfFsoR]\fR" 4
-.IX Item "-w[liaprmfFsoR]"
-.PD 0
-.IP "\fB\-\-debug\-dump[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames\-interp,=str,=loc,=Ranges]\fR" 4
-.IX Item "--debug-dump[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]"
-.PD
-Displays the contents of the debug sections in the file, if any are
-present. If one of the optional letters or words follows the switch
-then only data found in those specific sections will be dumped.
-.IP "\fB\-I\fR" 4
-.IX Item "-I"
-.PD 0
-.IP "\fB\-\-histogram\fR" 4
-.IX Item "--histogram"
-.PD
-Display a histogram of bucket list lengths when displaying the contents
-of the symbol tables.
-.IP "\fB\-v\fR" 4
-.IX Item "-v"
-.PD 0
-.IP "\fB\-\-version\fR" 4
-.IX Item "--version"
-.PD
-Display the version number of readelf.
-.IP "\fB\-W\fR" 4
-.IX Item "-W"
-.PD 0
-.IP "\fB\-\-wide\fR" 4
-.IX Item "--wide"
-.PD
-Don't break output lines to fit into 80 columns. By default
-\&\fBreadelf\fR breaks section header and segment listing lines for
-64\-bit \s-1ELF\s0 files, so that they fit into 80 columns. This option causes
-\&\fBreadelf\fR to print each section header resp. each segment one a
-single line, which is far more readable on terminals wider than 80 columns.
-.IP "\fB\-H\fR" 4
-.IX Item "-H"
-.PD 0
-.IP "\fB\-\-help\fR" 4
-.IX Item "--help"
-.PD
-Display the command line options understood by \fBreadelf\fR.
-.IP "\fB@\fR\fIfile\fR" 4
-.IX Item "@file"
-Read command-line options from \fIfile\fR. The options read are
-inserted in place of the original @\fIfile\fR option. If \fIfile\fR
-does not exist, or cannot be read, then the option will be treated
-literally, and not removed.
-.Sp
-Options in \fIfile\fR are separated by whitespace. A whitespace
-character may be included in an option by surrounding the entire
-option in either single or double quotes. Any character (including a
-backslash) may be included by prefixing the character to be included
-with a backslash. The \fIfile\fR may itself contain additional
-@\fIfile\fR options; any such options will be processed recursively.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-\&\fIobjdump\fR\|(1), and the Info entries for \fIbinutils\fR.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no Front-Cover Texts, and with no
-Back-Cover Texts. A copy of the license is included in the
-section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
Index: head/gnu/usr.bin/binutils/size/Makefile
===================================================================
--- head/gnu/usr.bin/binutils/size/Makefile
+++ head/gnu/usr.bin/binutils/size/Makefile
@@ -1,17 +0,0 @@
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc
-
-PROG= size
-SRCS= size.c
-CFLAGS+= -D_GNU_SOURCE
-CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils
-CFLAGS+= -I${SRCDIR}/binutils
-DPADD= ${RELTOP}/libbinutils/libbinutils.a
-DPADD+= ${RELTOP}/libbfd/libbfd.a
-DPADD+= ${RELTOP}/libiberty/libiberty.a
-LDADD= ${DPADD}
-
-.include <bsd.prog.mk>
Index: head/gnu/usr.bin/binutils/size/Makefile.depend
===================================================================
--- head/gnu/usr.bin/binutils/size/Makefile.depend
+++ head/gnu/usr.bin/binutils/size/Makefile.depend
@@ -1,21 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DIRDEPS = \
- gnu/lib/csu \
- gnu/lib/libgcc \
- gnu/usr.bin/binutils/libbfd \
- gnu/usr.bin/binutils/libbinutils \
- gnu/usr.bin/binutils/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/gnu/usr.bin/binutils/size/size.1
===================================================================
--- head/gnu/usr.bin/binutils/size/size.1
+++ head/gnu/usr.bin/binutils/size/size.1
@@ -1,263 +0,0 @@
-.\" $FreeBSD$
-.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14)
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. \*(C+ will
-.\" give a nicer C++. Capital omega is used to do unbreakable dashes and
-.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
-.\" nothing in troff, for use with C<>.
-.tr \(*W-
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" Escape single quotes in literal strings from groff's Unicode transform.
-.ie \n(.g .ds Aq \(aq
-.el .ds Aq '
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
-.\" entries marked with X<> in POD. Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.ie \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.el \{\
-. de IX
-..
-.\}
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "SIZE 1"
-.TH SIZE 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools"
-.\" For nroff, turn off justification. Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.if n .ad l
-.nh
-.SH "NAME"
-size \- list section sizes and total size
-.SH "SYNOPSIS"
-.IX Header "SYNOPSIS"
-size [\fB\-A\fR|\fB\-B\fR|\fB\-\-format=\fR\fIcompatibility\fR]
- [\fB\-\-help\fR]
- [\fB\-d\fR|\fB\-o\fR|\fB\-x\fR|\fB\-\-radix=\fR\fInumber\fR]
- [\fB\-t\fR|\fB\-\-totals\fR]
- [\fB\-\-target=\fR\fIbfdname\fR] [\fB\-V\fR|\fB\-\-version\fR]
- [\fIobjfile\fR...]
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-The \s-1GNU\s0 \fBsize\fR utility lists the section sizes\-\-\-and the total
-size\-\-\-for each of the object or archive files \fIobjfile\fR in its
-argument list. By default, one line of output is generated for each
-object file or each module in an archive.
-.PP
-\&\fIobjfile\fR... are the object files to be examined.
-If none are specified, the file \f(CW\*(C`a.out\*(C'\fR will be used.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-The command line options have the following meanings:
-.IP "\fB\-A\fR" 4
-.IX Item "-A"
-.PD 0
-.IP "\fB\-B\fR" 4
-.IX Item "-B"
-.IP "\fB\-\-format=\fR\fIcompatibility\fR" 4
-.IX Item "--format=compatibility"
-.PD
-Using one of these options, you can choose whether the output from \s-1GNU\s0
-\&\fBsize\fR resembles output from System V \fBsize\fR (using \fB\-A\fR,
-or \fB\-\-format=sysv\fR), or Berkeley \fBsize\fR (using \fB\-B\fR, or
-\&\fB\-\-format=berkeley\fR). The default is the one-line format similar to
-Berkeley's.
-.Sp
-Here is an example of the Berkeley (default) format of output from
-\&\fBsize\fR:
-.Sp
-.Vb 4
-\& $ size \-\-format=Berkeley ranlib size
-\& text data bss dec hex filename
-\& 294880 81920 11592 388392 5ed28 ranlib
-\& 294880 81920 11888 388688 5ee50 size
-.Ve
-.Sp
-This is the same data, but displayed closer to System V conventions:
-.Sp
-.Vb 7
-\& $ size \-\-format=SysV ranlib size
-\& ranlib :
-\& section size addr
-\& .text 294880 8192
-\& .data 81920 303104
-\& .bss 11592 385024
-\& Total 388392
-\&
-\&
-\& size :
-\& section size addr
-\& .text 294880 8192
-\& .data 81920 303104
-\& .bss 11888 385024
-\& Total 388688
-.Ve
-.IP "\fB\-\-help\fR" 4
-.IX Item "--help"
-Show a summary of acceptable arguments and options.
-.IP "\fB\-d\fR" 4
-.IX Item "-d"
-.PD 0
-.IP "\fB\-o\fR" 4
-.IX Item "-o"
-.IP "\fB\-x\fR" 4
-.IX Item "-x"
-.IP "\fB\-\-radix=\fR\fInumber\fR" 4
-.IX Item "--radix=number"
-.PD
-Using one of these options, you can control whether the size of each
-section is given in decimal (\fB\-d\fR, or \fB\-\-radix=10\fR); octal
-(\fB\-o\fR, or \fB\-\-radix=8\fR); or hexadecimal (\fB\-x\fR, or
-\&\fB\-\-radix=16\fR). In \fB\-\-radix=\fR\fInumber\fR, only the three
-values (8, 10, 16) are supported. The total size is always given in two
-radices; decimal and hexadecimal for \fB\-d\fR or \fB\-x\fR output, or
-octal and hexadecimal if you're using \fB\-o\fR.
-.IP "\fB\-t\fR" 4
-.IX Item "-t"
-.PD 0
-.IP "\fB\-\-totals\fR" 4
-.IX Item "--totals"
-.PD
-Show totals of all objects listed (Berkeley format listing mode only).
-.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
-.IX Item "--target=bfdname"
-Specify that the object-code format for \fIobjfile\fR is
-\&\fIbfdname\fR. This option may not be necessary; \fBsize\fR can
-automatically recognize many formats.
-.IP "\fB\-V\fR" 4
-.IX Item "-V"
-.PD 0
-.IP "\fB\-\-version\fR" 4
-.IX Item "--version"
-.PD
-Display the version number of \fBsize\fR.
-.IP "\fB@\fR\fIfile\fR" 4
-.IX Item "@file"
-Read command-line options from \fIfile\fR. The options read are
-inserted in place of the original @\fIfile\fR option. If \fIfile\fR
-does not exist, or cannot be read, then the option will be treated
-literally, and not removed.
-.Sp
-Options in \fIfile\fR are separated by whitespace. A whitespace
-character may be included in an option by surrounding the entire
-option in either single or double quotes. Any character (including a
-backslash) may be included by prefixing the character to be included
-with a backslash. The \fIfile\fR may itself contain additional
-@\fIfile\fR options; any such options will be processed recursively.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-\&\fIar\fR\|(1), \fIobjdump\fR\|(1), \fIreadelf\fR\|(1), and the Info entries for \fIbinutils\fR.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no Front-Cover Texts, and with no
-Back-Cover Texts. A copy of the license is included in the
-section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
Index: head/gnu/usr.bin/binutils/strings/Makefile
===================================================================
--- head/gnu/usr.bin/binutils/strings/Makefile
+++ head/gnu/usr.bin/binutils/strings/Makefile
@@ -1,17 +0,0 @@
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc
-
-PROG= strings
-SRCS= strings.c
-CFLAGS+= -D_GNU_SOURCE
-CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils
-CFLAGS+= -I${SRCDIR}/binutils
-DPADD= ${RELTOP}/libbinutils/libbinutils.a
-DPADD+= ${RELTOP}/libbfd/libbfd.a
-DPADD+= ${RELTOP}/libiberty/libiberty.a
-LDADD= ${DPADD}
-
-.include <bsd.prog.mk>
Index: head/gnu/usr.bin/binutils/strings/Makefile.depend
===================================================================
--- head/gnu/usr.bin/binutils/strings/Makefile.depend
+++ head/gnu/usr.bin/binutils/strings/Makefile.depend
@@ -1,21 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DIRDEPS = \
- gnu/lib/csu \
- gnu/lib/libgcc \
- gnu/usr.bin/binutils/libbfd \
- gnu/usr.bin/binutils/libbinutils \
- gnu/usr.bin/binutils/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/gnu/usr.bin/binutils/strings/strings.1
===================================================================
--- head/gnu/usr.bin/binutils/strings/strings.1
+++ head/gnu/usr.bin/binutils/strings/strings.1
@@ -1,254 +0,0 @@
-.\" $FreeBSD$
-.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14)
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. \*(C+ will
-.\" give a nicer C++. Capital omega is used to do unbreakable dashes and
-.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
-.\" nothing in troff, for use with C<>.
-.tr \(*W-
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" Escape single quotes in literal strings from groff's Unicode transform.
-.ie \n(.g .ds Aq \(aq
-.el .ds Aq '
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
-.\" entries marked with X<> in POD. Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.ie \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.el \{\
-. de IX
-..
-.\}
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "STRINGS 1"
-.TH STRINGS 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools"
-.\" For nroff, turn off justification. Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.if n .ad l
-.nh
-.SH "NAME"
-strings \- print the strings of printable characters in files.
-.SH "SYNOPSIS"
-.IX Header "SYNOPSIS"
-strings [\fB\-afov\fR] [\fB\-\fR\fImin-len\fR]
- [\fB\-n\fR \fImin-len\fR] [\fB\-\-bytes=\fR\fImin-len\fR]
- [\fB\-t\fR \fIradix\fR] [\fB\-\-radix=\fR\fIradix\fR]
- [\fB\-e\fR \fIencoding\fR] [\fB\-\-encoding=\fR\fIencoding\fR]
- [\fB\-\fR] [\fB\-\-all\fR] [\fB\-\-print\-file\-name\fR]
- [\fB\-T\fR \fIbfdname\fR] [\fB\-\-target=\fR\fIbfdname\fR]
- [\fB\-\-help\fR] [\fB\-\-version\fR] \fIfile\fR...
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-For each \fIfile\fR given, \s-1GNU\s0 \fBstrings\fR prints the printable
-character sequences that are at least 4 characters long (or the number
-given with the options below) and are followed by an unprintable
-character. By default, it only prints the strings from the initialized
-and loaded sections of object files; for other types of files, it prints
-the strings from the whole file.
-.PP
-\&\fBstrings\fR is mainly useful for determining the contents of non-text
-files.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-.IP "\fB\-a\fR" 4
-.IX Item "-a"
-.PD 0
-.IP "\fB\-\-all\fR" 4
-.IX Item "--all"
-.IP "\fB\-\fR" 4
-.IX Item "-"
-.PD
-Do not scan only the initialized and loaded sections of object files;
-scan the whole files.
-.IP "\fB\-f\fR" 4
-.IX Item "-f"
-.PD 0
-.IP "\fB\-\-print\-file\-name\fR" 4
-.IX Item "--print-file-name"
-.PD
-Print the name of the file before each string.
-.IP "\fB\-\-help\fR" 4
-.IX Item "--help"
-Print a summary of the program usage on the standard output and exit.
-.IP "\fB\-\fR\fImin-len\fR" 4
-.IX Item "-min-len"
-.PD 0
-.IP "\fB\-n\fR \fImin-len\fR" 4
-.IX Item "-n min-len"
-.IP "\fB\-\-bytes=\fR\fImin-len\fR" 4
-.IX Item "--bytes=min-len"
-.PD
-Print sequences of characters that are at least \fImin-len\fR characters
-long, instead of the default 4.
-.IP "\fB\-o\fR" 4
-.IX Item "-o"
-Like \fB\-t o\fR. Some other versions of \fBstrings\fR have \fB\-o\fR
-act like \fB\-t d\fR instead. Since we can not be compatible with both
-ways, we simply chose one.
-.IP "\fB\-t\fR \fIradix\fR" 4
-.IX Item "-t radix"
-.PD 0
-.IP "\fB\-\-radix=\fR\fIradix\fR" 4
-.IX Item "--radix=radix"
-.PD
-Print the offset within the file before each string. The single
-character argument specifies the radix of the offset\-\-\-\fBo\fR for
-octal, \fBx\fR for hexadecimal, or \fBd\fR for decimal.
-.IP "\fB\-e\fR \fIencoding\fR" 4
-.IX Item "-e encoding"
-.PD 0
-.IP "\fB\-\-encoding=\fR\fIencoding\fR" 4
-.IX Item "--encoding=encoding"
-.PD
-Select the character encoding of the strings that are to be found.
-Possible values for \fIencoding\fR are: \fBs\fR = single\-7\-bit\-byte
-characters (\s-1ASCII\s0, \s-1ISO\s0 8859, etc., default), \fBS\fR =
-single\-8\-bit\-byte characters, \fBb\fR = 16\-bit bigendian, \fBl\fR =
-16\-bit littleendian, \fBB\fR = 32\-bit bigendian, \fBL\fR = 32\-bit
-littleendian. Useful for finding wide character strings.
-.IP "\fB\-T\fR \fIbfdname\fR" 4
-.IX Item "-T bfdname"
-.PD 0
-.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
-.IX Item "--target=bfdname"
-.PD
-Specify an object code format other than your system's default format.
-.IP "\fB\-v\fR" 4
-.IX Item "-v"
-.PD 0
-.IP "\fB\-\-version\fR" 4
-.IX Item "--version"
-.PD
-Print the program version number on the standard output and exit.
-.IP "\fB@\fR\fIfile\fR" 4
-.IX Item "@file"
-Read command-line options from \fIfile\fR. The options read are
-inserted in place of the original @\fIfile\fR option. If \fIfile\fR
-does not exist, or cannot be read, then the option will be treated
-literally, and not removed.
-.Sp
-Options in \fIfile\fR are separated by whitespace. A whitespace
-character may be included in an option by surrounding the entire
-option in either single or double quotes. Any character (including a
-backslash) may be included by prefixing the character to be included
-with a backslash. The \fIfile\fR may itself contain additional
-@\fIfile\fR options; any such options will be processed recursively.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-\&\fIar\fR\|(1), \fInm\fR\|(1), \fIobjdump\fR\|(1), \fIranlib\fR\|(1), \fIreadelf\fR\|(1)
-and the Info entries for \fIbinutils\fR.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no Front-Cover Texts, and with no
-Back-Cover Texts. A copy of the license is included in the
-section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
Index: head/gnu/usr.bin/binutils/strip/Makefile
===================================================================
--- head/gnu/usr.bin/binutils/strip/Makefile
+++ head/gnu/usr.bin/binutils/strip/Makefile
@@ -1,18 +0,0 @@
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-.PATH: ${SRCDIR}/binutils ${SRCDIR}/binutils/doc
-
-PROG= strip
-SRCS= objcopy.c is-strip.c
-CFLAGS+= -D_GNU_SOURCE
-CFLAGS+= -I${.CURDIR}/${RELTOP}/libbinutils
-CFLAGS+= -I${SRCDIR}/binutils -I${SRCDIR}/bfd
-DPADD= ${RELTOP}/libbinutils/libbinutils.a
-DPADD+= ${RELTOP}/libbfd/libbfd.a
-DPADD+= ${RELTOP}/libiberty/libiberty.a
-LDADD= ${DPADD}
-INSTALLFLAGS= -S
-
-.include <bsd.prog.mk>
Index: head/gnu/usr.bin/binutils/strip/Makefile.depend
===================================================================
--- head/gnu/usr.bin/binutils/strip/Makefile.depend
+++ head/gnu/usr.bin/binutils/strip/Makefile.depend
@@ -1,21 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DIRDEPS = \
- gnu/lib/csu \
- gnu/lib/libgcc \
- gnu/usr.bin/binutils/libbfd \
- gnu/usr.bin/binutils/libbinutils \
- gnu/usr.bin/binutils/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/gnu/usr.bin/binutils/strip/strip.1
===================================================================
--- head/gnu/usr.bin/binutils/strip/strip.1
+++ head/gnu/usr.bin/binutils/strip/strip.1
@@ -1,392 +0,0 @@
-.\" $FreeBSD$
-.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14)
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. \*(C+ will
-.\" give a nicer C++. Capital omega is used to do unbreakable dashes and
-.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
-.\" nothing in troff, for use with C<>.
-.tr \(*W-
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" Escape single quotes in literal strings from groff's Unicode transform.
-.ie \n(.g .ds Aq \(aq
-.el .ds Aq '
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
-.\" entries marked with X<> in POD. Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.ie \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.el \{\
-. de IX
-..
-.\}
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "STRIP 1"
-.TH STRIP 1 "2010-10-30" "binutils-2.17.50" "GNU Development Tools"
-.\" For nroff, turn off justification. Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.if n .ad l
-.nh
-.SH "NAME"
-strip \- Discard symbols from object files
-.SH "SYNOPSIS"
-.IX Header "SYNOPSIS"
-strip [\fB\-F\fR \fIbfdname\fR |\fB\-\-target=\fR\fIbfdname\fR]
- [\fB\-I\fR \fIbfdname\fR |\fB\-\-input\-target=\fR\fIbfdname\fR]
- [\fB\-O\fR \fIbfdname\fR |\fB\-\-output\-target=\fR\fIbfdname\fR]
- [\fB\-s\fR|\fB\-\-strip\-all\fR]
- [\fB\-S\fR|\fB\-g\fR|\fB\-d\fR|\fB\-\-strip\-debug\fR]
- [\fB\-K\fR \fIsymbolname\fR |\fB\-\-keep\-symbol=\fR\fIsymbolname\fR]
- [\fB\-N\fR \fIsymbolname\fR |\fB\-\-strip\-symbol=\fR\fIsymbolname\fR]
- [\fB\-w\fR|\fB\-\-wildcard\fR]
- [\fB\-x\fR|\fB\-\-discard\-all\fR] [\fB\-X\fR |\fB\-\-discard\-locals\fR]
- [\fB\-R\fR \fIsectionname\fR |\fB\-\-remove\-section=\fR\fIsectionname\fR]
- [\fB\-o\fR \fIfile\fR] [\fB\-p\fR|\fB\-\-preserve\-dates\fR]
- [\fB\-\-keep\-file\-symbols\fR]
- [\fB\-\-only\-keep\-debug\fR]
- [\fB\-v\fR |\fB\-\-verbose\fR] [\fB\-V\fR|\fB\-\-version\fR]
- [\fB\-\-help\fR] [\fB\-\-info\fR]
- \fIobjfile\fR...
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-\&\s-1GNU\s0 \fBstrip\fR discards all symbols from object files
-\&\fIobjfile\fR. The list of object files may include archives.
-At least one object file must be given.
-.PP
-\&\fBstrip\fR modifies the files named in its argument,
-rather than writing modified copies under different names.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-.IP "\fB\-F\fR \fIbfdname\fR" 4
-.IX Item "-F bfdname"
-.PD 0
-.IP "\fB\-\-target=\fR\fIbfdname\fR" 4
-.IX Item "--target=bfdname"
-.PD
-Treat the original \fIobjfile\fR as a file with the object
-code format \fIbfdname\fR, and rewrite it in the same format.
-.IP "\fB\-\-help\fR" 4
-.IX Item "--help"
-Show a summary of the options to \fBstrip\fR and exit.
-.IP "\fB\-\-info\fR" 4
-.IX Item "--info"
-Display a list showing all architectures and object formats available.
-.IP "\fB\-I\fR \fIbfdname\fR" 4
-.IX Item "-I bfdname"
-.PD 0
-.IP "\fB\-\-input\-target=\fR\fIbfdname\fR" 4
-.IX Item "--input-target=bfdname"
-.PD
-Treat the original \fIobjfile\fR as a file with the object
-code format \fIbfdname\fR.
-.IP "\fB\-O\fR \fIbfdname\fR" 4
-.IX Item "-O bfdname"
-.PD 0
-.IP "\fB\-\-output\-target=\fR\fIbfdname\fR" 4
-.IX Item "--output-target=bfdname"
-.PD
-Replace \fIobjfile\fR with a file in the output format \fIbfdname\fR.
-.IP "\fB\-R\fR \fIsectionname\fR" 4
-.IX Item "-R sectionname"
-.PD 0
-.IP "\fB\-\-remove\-section=\fR\fIsectionname\fR" 4
-.IX Item "--remove-section=sectionname"
-.PD
-Remove any section named \fIsectionname\fR from the output file. This
-option may be given more than once. Note that using this option
-inappropriately may make the output file unusable.
-.IP "\fB\-s\fR" 4
-.IX Item "-s"
-.PD 0
-.IP "\fB\-\-strip\-all\fR" 4
-.IX Item "--strip-all"
-.PD
-Remove all symbols.
-.IP "\fB\-g\fR" 4
-.IX Item "-g"
-.PD 0
-.IP "\fB\-S\fR" 4
-.IX Item "-S"
-.IP "\fB\-d\fR" 4
-.IX Item "-d"
-.IP "\fB\-\-strip\-debug\fR" 4
-.IX Item "--strip-debug"
-.PD
-Remove debugging symbols only.
-.IP "\fB\-\-strip\-unneeded\fR" 4
-.IX Item "--strip-unneeded"
-Remove all symbols that are not needed for relocation processing.
-.IP "\fB\-K\fR \fIsymbolname\fR" 4
-.IX Item "-K symbolname"
-.PD 0
-.IP "\fB\-\-keep\-symbol=\fR\fIsymbolname\fR" 4
-.IX Item "--keep-symbol=symbolname"
-.PD
-When stripping symbols, keep symbol \fIsymbolname\fR even if it would
-normally be stripped. This option may be given more than once.
-.IP "\fB\-N\fR \fIsymbolname\fR" 4
-.IX Item "-N symbolname"
-.PD 0
-.IP "\fB\-\-strip\-symbol=\fR\fIsymbolname\fR" 4
-.IX Item "--strip-symbol=symbolname"
-.PD
-Remove symbol \fIsymbolname\fR from the source file. This option may be
-given more than once, and may be combined with strip options other than
-\&\fB\-K\fR.
-.IP "\fB\-o\fR \fIfile\fR" 4
-.IX Item "-o file"
-Put the stripped output in \fIfile\fR, rather than replacing the
-existing file. When this argument is used, only one \fIobjfile\fR
-argument may be specified.
-.IP "\fB\-p\fR" 4
-.IX Item "-p"
-.PD 0
-.IP "\fB\-\-preserve\-dates\fR" 4
-.IX Item "--preserve-dates"
-.PD
-Preserve the access and modification dates of the file.
-.IP "\fB\-w\fR" 4
-.IX Item "-w"
-.PD 0
-.IP "\fB\-\-wildcard\fR" 4
-.IX Item "--wildcard"
-.PD
-Permit regular expressions in \fIsymbolname\fRs used in other command
-line options. The question mark (?), asterisk (*), backslash (\e) and
-square brackets ([]) operators can be used anywhere in the symbol
-name. If the first character of the symbol name is the exclamation
-point (!) then the sense of the switch is reversed for that symbol.
-For example:
-.Sp
-.Vb 1
-\& \-w \-K !foo \-K fo*
-.Ve
-.Sp
-would cause strip to only keep symbols that start with the letters
-\&\*(L"fo\*(R", but to discard the symbol \*(L"foo\*(R".
-.IP "\fB\-x\fR" 4
-.IX Item "-x"
-.PD 0
-.IP "\fB\-\-discard\-all\fR" 4
-.IX Item "--discard-all"
-.PD
-Remove non-global symbols.
-.IP "\fB\-X\fR" 4
-.IX Item "-X"
-.PD 0
-.IP "\fB\-\-discard\-locals\fR" 4
-.IX Item "--discard-locals"
-.PD
-Remove compiler-generated local symbols.
-(These usually start with \fBL\fR or \fB.\fR.)
-.IP "\fB\-\-keep\-file\-symbols\fR" 4
-.IX Item "--keep-file-symbols"
-When stripping a file, perhaps with \fB\-\-strip\-debug\fR or
-\&\fB\-\-strip\-unneeded\fR, retain any symbols specifying source file names,
-which would otherwise get stripped.
-.IP "\fB\-\-only\-keep\-debug\fR" 4
-.IX Item "--only-keep-debug"
-Strip a file, removing contents of any sections that would not be
-stripped by \fB\-\-strip\-debug\fR and leaving the debugging sections
-intact. In \s-1ELF\s0 files, this preserves all note sections in the output.
-.Sp
-The intention is that this option will be used in conjunction with
-\&\fB\-\-add\-gnu\-debuglink\fR to create a two part executable. One a
-stripped binary which will occupy less space in \s-1RAM\s0 and in a
-distribution and the second a debugging information file which is only
-needed if debugging abilities are required. The suggested procedure
-to create these files is as follows:
-.RS 4
-.IP "1.<Link the executable as normal. Assuming that it is called>" 4
-.IX Item "1.<Link the executable as normal. Assuming that it is called>"
-\&\f(CW\*(C`foo\*(C'\fR then...
-.ie n .IP "1.<Run ""objcopy \-\-only\-keep\-debug foo foo.dbg"" to>" 4
-.el .IP "1.<Run \f(CWobjcopy \-\-only\-keep\-debug foo foo.dbg\fR to>" 4
-.IX Item "1.<Run objcopy --only-keep-debug foo foo.dbg to>"
-create a file containing the debugging info.
-.ie n .IP "1.<Run ""objcopy \-\-strip\-debug foo"" to create a>" 4
-.el .IP "1.<Run \f(CWobjcopy \-\-strip\-debug foo\fR to create a>" 4
-.IX Item "1.<Run objcopy --strip-debug foo to create a>"
-stripped executable.
-.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.dbg foo"">" 4
-.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.dbg foo\fR>" 4
-.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.dbg foo>"
-to add a link to the debugging info into the stripped executable.
-.RE
-.RS 4
-.Sp
-Note \- the choice of \f(CW\*(C`.dbg\*(C'\fR as an extension for the debug info
-file is arbitrary. Also the \f(CW\*(C`\-\-only\-keep\-debug\*(C'\fR step is
-optional. You could instead do this:
-.IP "1.<Link the executable as normal.>" 4
-.IX Item "1.<Link the executable as normal.>"
-.PD 0
-.ie n .IP "1.<Copy ""foo"" to ""foo.full"">" 4
-.el .IP "1.<Copy \f(CWfoo\fR to \f(CWfoo.full\fR>" 4
-.IX Item "1.<Copy foo to foo.full>"
-.ie n .IP "1.<Run ""strip \-\-strip\-debug foo"">" 4
-.el .IP "1.<Run \f(CWstrip \-\-strip\-debug foo\fR>" 4
-.IX Item "1.<Run strip --strip-debug foo>"
-.ie n .IP "1.<Run ""objcopy \-\-add\-gnu\-debuglink=foo.full foo"">" 4
-.el .IP "1.<Run \f(CWobjcopy \-\-add\-gnu\-debuglink=foo.full foo\fR>" 4
-.IX Item "1.<Run objcopy --add-gnu-debuglink=foo.full foo>"
-.RE
-.RS 4
-.PD
-.Sp
-ie the file pointed to by the \fB\-\-add\-gnu\-debuglink\fR can be the
-full executable. It does not have to be a file created by the
-\&\fB\-\-only\-keep\-debug\fR switch.
-.Sp
-Note \- this switch is only intended for use on fully linked files. It
-does not make sense to use it on object files where the debugging
-information may be incomplete. Besides the gnu_debuglink feature
-currently only supports the presence of one filename containing
-debugging information, not multiple filenames on a one-per-object-file
-basis.
-.RE
-.IP "\fB\-V\fR" 4
-.IX Item "-V"
-.PD 0
-.IP "\fB\-\-version\fR" 4
-.IX Item "--version"
-.PD
-Show the version number for \fBstrip\fR.
-.IP "\fB\-v\fR" 4
-.IX Item "-v"
-.PD 0
-.IP "\fB\-\-verbose\fR" 4
-.IX Item "--verbose"
-.PD
-Verbose output: list all object files modified. In the case of
-archives, \fBstrip \-v\fR lists all members of the archive.
-.IP "\fB@\fR\fIfile\fR" 4
-.IX Item "@file"
-Read command-line options from \fIfile\fR. The options read are
-inserted in place of the original @\fIfile\fR option. If \fIfile\fR
-does not exist, or cannot be read, then the option will be treated
-literally, and not removed.
-.Sp
-Options in \fIfile\fR are separated by whitespace. A whitespace
-character may be included in an option by surrounding the entire
-option in either single or double quotes. Any character (including a
-backslash) may be included by prefixing the character to be included
-with a backslash. The \fIfile\fR may itself contain additional
-@\fIfile\fR options; any such options will be processed recursively.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-the Info entries for \fIbinutils\fR.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no Front-Cover Texts, and with no
-Back-Cover Texts. A copy of the license is included in the
-section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".
Index: head/gnu/usr.bin/cc/Makefile
===================================================================
--- head/gnu/usr.bin/cc/Makefile
+++ head/gnu/usr.bin/cc/Makefile
@@ -13,9 +13,6 @@
.if ${MK_CXX} != "no"
SUBDIR+= cc1plus c++
-.if ${MK_ELFTOOLCHAIN_TOOLS} == "no"
-SUBDIR+= c++filt
-.endif
.endif
.if ${MK_GCOV} != "no"
Index: head/gnu/usr.bin/cc/c++filt/Makefile
===================================================================
--- head/gnu/usr.bin/cc/c++filt/Makefile
+++ head/gnu/usr.bin/cc/c++filt/Makefile
@@ -1,19 +0,0 @@
-# $FreeBSD$
-
-MAN=
-.include <bsd.own.mk>
-
-.include "../Makefile.inc"
-.include "../Makefile.fe"
-
-.PATH: ${GCCLIB}/libiberty
-
-PROG= c++filt
-SRCS= cp-demangle.c
-
-CFLAGS+= -DSTANDALONE_DEMANGLER -DVERSION=\"$(GCC_VERSION)\"
-
-DPADD= ${LIBIBERTY}
-LDADD= ${LIBIBERTY}
-
-.include <bsd.prog.mk>
Index: head/gnu/usr.bin/cc/c++filt/Makefile.depend
===================================================================
--- head/gnu/usr.bin/cc/c++filt/Makefile.depend
+++ head/gnu/usr.bin/cc/c++filt/Makefile.depend
@@ -1,23 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DEP_RELDIR := ${_PARSEDIR:S,${SRCTOP}/,,}
-
-DIRDEPS = \
- gnu/lib/csu \
- gnu/lib/libgcc \
- gnu/usr.bin/cc/cc_tools \
- gnu/usr.bin/cc/libiberty \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
- lib/libc_nonshared \
- lib/libcompiler_rt \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: head/tools/build/mk/OptionalObsoleteFiles.inc
===================================================================
--- head/tools/build/mk/OptionalObsoleteFiles.inc
+++ head/tools/build/mk/OptionalObsoleteFiles.inc
@@ -1025,9 +1025,6 @@
.if ${MK_CXX} == no
OLD_FILES+=usr/bin/CC
OLD_FILES+=usr/bin/c++
-.if ${MK_ELFTOOLCHAIN_TOOLS} == no
-OLD_FILES+=usr/bin/c++filt
-.endif
OLD_FILES+=usr/bin/g++
OLD_FILES+=usr/libexec/cc1plus
.endif
@@ -1656,14 +1653,16 @@
OLD_FILES+=usr/share/man/man1/elfcopy.1.gz
.endif
-.if ${MK_ELFTOOLCHAIN_TOOLS} == no && ${MK_BINUTILS} == no
+.if ${MK_ELFTOOLCHAIN_TOOLS} == no
OLD_FILES+=usr/bin/addr2line
+OLD_FILES+=usr/bin/c++filt
OLD_FILES+=usr/bin/nm
OLD_FILES+=usr/bin/readelf
OLD_FILES+=usr/bin/size
OLD_FILES+=usr/bin/strings
OLD_FILES+=usr/bin/strip
OLD_FILES+=usr/share/man/man1/addr2line.1.gz
+OLD_FILES+=usr/share/man/man1/c++filt.1.gz
OLD_FILES+=usr/share/man/man1/nm.1.gz
OLD_FILES+=usr/share/man/man1/readelf.1.gz
OLD_FILES+=usr/share/man/man1/size.1.gz
@@ -1753,9 +1752,6 @@
.endif
.if ${MK_GCC} == no
-.if ${MK_ELFTOOLCHAIN_TOOLS} == no
-OLD_FILES+=usr/bin/c++filt
-.endif
OLD_FILES+=usr/bin/g++
OLD_FILES+=usr/bin/gcc
OLD_FILES+=usr/bin/gcov
Index: head/tools/build/options/WITHOUT_BINUTILS
===================================================================
--- head/tools/build/options/WITHOUT_BINUTILS
+++ head/tools/build/options/WITHOUT_BINUTILS
@@ -1,5 +1,4 @@
.\" $FreeBSD$
-Set to not build or install binutils (as, c++-filt,
-ld, nm, objcopy, objdump, readelf, size and strip) as part
+Set to not build or install binutils (as, ld, objcopy, and objdump ) as part
of the normal system build.
The resulting system cannot build programs from source.
Index: head/tools/build/options/WITHOUT_ELFTOOLCHAIN_TOOLS
===================================================================
--- head/tools/build/options/WITHOUT_ELFTOOLCHAIN_TOOLS
+++ head/tools/build/options/WITHOUT_ELFTOOLCHAIN_TOOLS
@@ -1,5 +1,5 @@
.\" $FreeBSD$
-Set to use
+Set to avoid building ELF Tool Chain tools
.Xr addr2line 1 ,
.Xr c++filt 1 ,
.Xr nm 1 ,
@@ -7,5 +7,4 @@
.Xr size 1 ,
.Xr strings 1 ,
and
-.Xr strip 1
-from GNU binutils instead of the ELF Tool Chain project.
+.Xr strip 1 .

File Metadata

Mime Type
text/plain
Expires
Sat, Apr 25, 7:55 AM (2 h, 7 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
32116888
Default Alt Text
D3238.id7687.diff (83 KB)

Event Timeline