Page MenuHomeFreeBSD
Files F153358615

D28365.id82969.diff
No OneTemporary
Actions

D28365.id82969.diff
View Options

diff --git a/sys/dts/arm/db78100.dts b/sys/dts/arm/db78100.dts
deleted file mode 100644
--- a/sys/dts/arm/db78100.dts
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * Copyright (c) 2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * This software was developed by Semihalf under sponsorship from
- * the FreeBSD Foundation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Marvell DB-78100 Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "mrvl,DB-78100";
- compatible = "DB-78100-BP", "DB-78100-BP-A";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- serial0 = &serial0;
- serial1 = &serial1;
- mpp = &MPP;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR571";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x20000000>; // 512M at 0x0
- };
-
- localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
- bank-count = <5>;
-
- /* This reflects CPU decode windows setup. */
- ranges = <0x0 0x2f 0xf9300000 0x00100000
- 0x1 0x3e 0xf9400000 0x00100000
- 0x2 0x3d 0xf9500000 0x02000000
- 0x3 0x3b 0xfb500000 0x00100000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x00100000>;
- };
-
- led@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "led";
- reg = <0x1 0x0 0x00100000>;
- };
-
- nor@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x2 0x0 0x02000000>;
- };
-
- nand@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mrvl,nfc";
- reg = <0x3 0x0 0x00100000>;
- };
- };
-
- soc78100@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <8>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x34>;
- pin-count = <50>;
- pin-map = <
- 0 2 /* MPP[0]: GE1_TXCLK */
- 1 2 /* MPP[1]: GE1_TXCTL */
- 2 2 /* MPP[2]: GE1_RXCTL */
- 3 2 /* MPP[3]: GE1_RXCLK */
- 4 2 /* MPP[4]: GE1_TXD[0] */
- 5 2 /* MPP[5]: GE1_TXD[1] */
- 6 2 /* MPP[6]: GE1_TXD[2] */
- 7 2 /* MPP[7]: GE1_TXD[3] */
- 8 2 /* MPP[8]: GE1_RXD[0] */
- 9 2 /* MPP[9]: GE1_RXD[1] */
- 10 2 /* MPP[10]: GE1_RXD[2] */
- 11 2 /* MPP[11]: GE1_RXD[3] */
- 13 3 /* MPP[13]: SYSRST_OUTn */
- 14 3 /* MPP[14]: SATA1_ACTn */
- 15 3 /* MPP[15]: SATA0_ACTn */
- 16 4 /* MPP[16]: UA2_TXD */
- 17 4 /* MPP[17]: UA2_RXD */
- 18 3 /* MPP[18]: <UNKNOWN> */
- 19 3 /* MPP[19]: <UNKNOWN> */
- 20 3 /* MPP[20]: <UNKNOWN> */
- 21 3 /* MPP[21]: <UNKNOWN> */
- 22 4 /* MPP[22]: UA3_TXD */
- 23 4 >; /* MPP[21]: UA3_RXD */
- };
-
- GPIO: gpio@10100 {
- #gpio-cells = <2>;
- compatible = "mrvl,gpio";
- reg = <0x10100 0x20>;
- gpio-controller;
- interrupts = <56 57 58 59>;
- interrupt-parent = <&PIC>;
- };
-
- rtc@10300 {
- compatible = "mrvl,rtc";
- reg = <0x10300 0x08>;
- };
-
- twsi@11000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11000 0x20>;
- interrupts = <2>;
- interrupt-parent = <&PIC>;
- };
-
- twsi@11100 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11100 0x20>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- enet0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <41 42 43 40 70>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy0>;
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x8>;
- };
- phy1: ethernet-phy@1 {
- reg = <0x9>;
- };
- };
- };
-
- enet1: ethernet@76000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x76000 0x2000>;
- ranges = <0x0 0x76000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <45 46 47 44 70>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy1>;
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
- usb@50000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <72 16>;
- interrupt-parent = <&PIC>;
- };
-
- usb@51000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x51000 0x1000>;
- interrupts = <72 17>;
- interrupt-parent = <&PIC>;
- };
-
- usb@52000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x52000 0x1000>;
- interrupts = <72 18>;
- interrupt-parent = <&PIC>;
- };
-
- xor@60000 {
- compatible = "mrvl,xor";
- reg = <0x60000 0x1000>;
- interrupts = <22 23>;
- interrupt-parent = <&PIC>;
- };
-
- crypto@90000 {
- compatible = "mrvl,cesa";
- reg = <0x90000 0x1000 /* tdma base reg chan 0 */
- 0x9D000 0x1000>; /* cesa base reg chan 0 */
- interrupts = <19>;
- interrupt-parent = <&PIC>;
- };
-
- sata@a0000 {
- compatible = "mrvl,sata";
- reg = <0xa0000 0x6000>;
- interrupts = <26>;
- interrupt-parent = <&PIC>;
- };
- };
-
- pci0: pcie@f1040000 {
- compatible = "mrvl,pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf1040000 0x2000>;
- bus-range = <0 255>;
- ranges = <0x02000000 0x0 0xf2000000 0xf2000000 0x0 0x04000000
- 0x01000000 0x0 0x00000000 0xf1100000 0x0 0x00100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&PIC>;
- interrupts = <68>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x1 */
- 0x0800 0x0 0x0 0x1 &PIC 0x20
- 0x0800 0x0 0x0 0x2 &PIC 0x21
- 0x0800 0x0 0x0 0x3 &PIC 0x22
- 0x0800 0x0 0x0 0x4 &PIC 0x23
- >;
- };
-
- sram@fd000000 {
- compatible = "mrvl,cesa-sram";
- reg = <0xfd000000 0x00100000>;
- };
-
- chosen {
- stdin = "serial0";
- stdout = "serial0";
- };
-};
diff --git a/sys/dts/arm/db88f5182.dts b/sys/dts/arm/db88f5182.dts
deleted file mode 100644
--- a/sys/dts/arm/db88f5182.dts
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (c) 2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * This software was developed by Semihalf under sponsorship from
- * the FreeBSD Foundation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Marvell DB-88F5182 Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "mrvl,DB-88F5182";
- compatible = "DB-88F5182-BP", "DB-88F5182-BP-A";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- serial0 = &serial0;
- serial1 = &serial1;
- mpp = &MPP;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR531";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x08000000>; // 128M at 0x0
- };
-
- localbus@f1000000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
-
- /* This reflects CPU decode windows setup. */
- ranges = <0x0 0x0f 0xf9300000 0x00100000
- 0x1 0x1e 0xfa000000 0x00100000
- 0x2 0x1d 0xfa100000 0x02000000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x00100000>;
- bank-width = <2>;
- device-width = <1>;
- };
-
- led@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "led";
- reg = <0x1 0x0 0x00100000>;
- };
-
- nor@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x2 0x0 0x02000000>;
- bank-width = <2>;
- device-width = <1>;
- };
- };
-
- soc88f5182@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <0>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x54>;
- pin-count = <20>;
- pin-map = <
- 0 3 /* MPP[0]: GPIO[0] */
- 2 2 /* MPP[2]: PCI_REQn[3] */
- 3 2 /* MPP[3]: PCI_GNTn[3] */
- 4 2 /* MPP[4]: PCI_REQn[4] */
- 5 2 /* MPP[5]: PCI_GNTn[4] */
- 6 5 /* MPP[6]: SATA0_ACT */
- 7 5 /* MPP[7]: SATA1_ACT */
- 12 5 /* MPP[12]: SATA0_PRESENT */
- 13 5 /* MPP[13]: SATA1_PRESENT */
- 14 4 /* MPP[14]: NAND Flash REn[2] */
- 15 4 /* MPP[15]: NAND Flash WEn[2] */
- 16 0 /* MPP[16]: UA1_RXD */
- 17 0 /* MPP[17]: UA1_TXD */
- 18 0 /* MPP[18]: UA1_CTS */
- 19 0 >; /* MPP[19]: UA1_RTS */
- };
-
- GPIO: gpio@10100 {
- #gpio-cells = <2>;
- compatible = "mrvl,gpio";
- reg = <0x10100 0x20>;
- gpio-controller;
- interrupts = <6 7 8 9>;
- interrupt-parent = <&PIC>;
- };
-
- twsi@11000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11000 0x20>;
- interrupts = <43>;
- interrupt-parent = <&PIC>;
- };
-
- enet0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V1";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <18 19 20 21 22>;
- interrupt-parent = <&PIC>;
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <4>;
- interrupt-parent = <&PIC>;
- };
-
- usb@50000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <17 16>;
- interrupt-parent = <&PIC>;
- };
-
- idma@60000 {
- compatible = "mrvl,idma";
- reg = <0x60000 0x1000>;
- interrupts = <24 25 26 27 23>;
- interrupt-parent = <&PIC>;
- };
-
- sata@80000 {
- compatible = "mrvl,sata";
- reg = <0x80000 0x6000>;
- interrupts = <29>;
- interrupt-parent = <&PIC>;
- };
- };
-};
diff --git a/sys/dts/arm/db88f5281.dts b/sys/dts/arm/db88f5281.dts
deleted file mode 100644
--- a/sys/dts/arm/db88f5281.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * Copyright (c) 2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * This software was developed by Semihalf under sponsorship from
- * the FreeBSD Foundation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Marvell DB-88F5281 Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "mrvl,DB-88F5281";
- compatible = "DB-88F5281-BP", "DB-88F5281-BP-A";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- serial0 = &serial0;
- serial1 = &serial1;
- mpp = &MPP;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR531";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x08000000>; // 128M at 0x0
- };
-
- localbus@f1000000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
-
- /* This reflects CPU decode windows setup. */
- ranges = <0x0 0x0f 0xf9300000 0x00100000
- 0x1 0x1e 0xfa000000 0x00100000
- 0x2 0x1d 0xfa100000 0x02000000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x00100000>;
- bank-width = <2>;
- device-width = <1>;
- };
-
- led@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "led";
- reg = <0x1 0x0 0x00100000>;
- };
-
- nor@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x2 0x0 0x02000000>;
- bank-width = <2>;
- device-width = <1>;
- };
- };
-
- soc88f5281@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <0>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x54>;
- pin-count = <20>;
- pin-map = <
- 0 3 /* MPP[0]: GPIO[0] */
- 2 2 /* MPP[2]: PCI_REQn[3] */
- 3 2 /* MPP[3]: PCI_GNTn[3] */
- 4 2 /* MPP[4]: PCI_REQn[4] */
- 5 2 /* MPP[5]: PCI_GNTn[4] */
- 6 3 /* MPP[6]: <UNKNOWN> */
- 7 3 /* MPP[7]: <UNKNOWN> */
- 8 3 /* MPP[8]: <UNKNOWN> */
- 9 3 /* MPP[9]: <UNKNOWN> */
- 14 4 /* MPP[14]: NAND Flash REn[2] */
- 15 4 /* MPP[15]: NAND Flash WEn[2] */
- 16 0 /* MPP[16]: UA1_RXD */
- 17 0 /* MPP[17]: UA1_TXD */
- 18 0 /* MPP[18]: UA1_CTS */
- 19 0 >; /* MPP[19]: UA1_RTS */
- };
-
- GPIO: gpio@10100 {
- #gpio-cells = <2>;
- compatible = "mrvl,gpio";
- reg = <0x10100 0x20>;
- gpio-controller;
- interrupts = <6 7 8 9>;
- interrupt-parent = <&PIC>;
- };
-
- twsi@11000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11000 0x20>;
- interrupts = <43>;
- interrupt-parent = <&PIC>;
- };
-
- enet0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V1";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <18 19 20 21 22>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy0>;
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x8>;
- };
- };
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <4>;
- interrupt-parent = <&PIC>;
- };
-
- usb@50000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <17 16>;
- interrupt-parent = <&PIC>;
- };
-
- idma@60000 {
- compatible = "mrvl,idma";
- reg = <0x60000 0x1000>;
- interrupts = <24 25 26 27 23>;
- interrupt-parent = <&PIC>;
- };
- };
-};
diff --git a/sys/dts/arm/db88f6281.dts b/sys/dts/arm/db88f6281.dts
deleted file mode 100644
--- a/sys/dts/arm/db88f6281.dts
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (c) 2009-2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * This software was developed by Semihalf under sponsorship from
- * the FreeBSD Foundation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Marvell DB-88F6281 Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "mrvl,DB-88F6281";
- compatible = "DB-88F6281-BP", "DB-88F6281-BP-A";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- mpp = &MPP;
- pci0 = &pci0;
- serial0 = &serial0;
- serial1 = &serial1;
- soc = &SOC;
- sram = &SRAM;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR131";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x20000000>; // 512M at 0x0
- };
-
- localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
- bank-count = <3>;
-
- /* This reflects CPU decode windows setup. */
- ranges = <0x0 0x2f 0xf9300000 0x00100000>;
-
- nand@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mrvl,nfc";
- reg = <0x0 0x0 0x00100000>;
- bank-width = <2>;
- device-width = <1>;
-
- slice@0 {
- reg = <0x0 0x200000>;
- label = "u-boot";
- read-only;
- };
-
- slice@200000 {
- reg = <0x200000 0x7e00000>;
- label = "root";
- };
- };
- };
-
- SOC: soc88f6281@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <1>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x34>;
- pin-count = <50>;
- pin-map = <
- 0 1 /* MPP[0]: NF_IO[2] */
- 1 1 /* MPP[1]: NF_IO[3] */
- 2 1 /* MPP[2]: NF_IO[4] */
- 3 1 /* MPP[3]: NF_IO[5] */
- 4 1 /* MPP[4]: NF_IO[6] */
- 5 1 /* MPP[5]: NF_IO[7] */
- 6 1 /* MPP[6]: SYSRST_OUTn */
- 7 2 /* MPP[7]: SPI_SCn */
- 8 1 /* MPP[8]: TW_SDA */
- 9 1 /* MPP[9]: TW_SCK */
- 10 3 /* MPP[10]: UA0_TXD */
- 11 3 /* MPP[11]: UA0_RXD */
- 12 1 /* MPP[12]: SD_CLK */
- 13 1 /* MPP[13]: SD_CMD */
- 14 1 /* MPP[14]: SD_D[0] */
- 15 1 /* MPP[15]: SD_D[1] */
- 16 1 /* MPP[16]: SD_D[2] */
- 17 1 /* MPP[17]: SD_D[3] */
- 18 1 /* MPP[18]: NF_IO[0] */
- 19 1 /* MPP[19]: NF_IO[1] */
- 20 5 /* MPP[20]: SATA1_AC */
- 21 5 >; /* MPP[21]: SATA0_AC */
- };
-
- GPIO: gpio@10100 {
- #gpio-cells = <2>;
- compatible = "mrvl,gpio";
- reg = <0x10100 0x20>;
- gpio-controller;
- interrupts = <35 36 37 38 39 40 41>;
- interrupt-parent = <&PIC>;
- };
-
- rtc@10300 {
- compatible = "mrvl,rtc";
- reg = <0x10300 0x08>;
- };
-
- twsi@11000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11000 0x20>;
- interrupts = <43>;
- interrupt-parent = <&PIC>;
- };
-
- enet0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <12 13 14 11 46>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy0>;
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x8>;
- };
- };
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <34>;
- interrupt-parent = <&PIC>;
- };
-
- crypto@30000 {
- compatible = "mrvl,cesa";
- reg = <0x30000 0x1000 /* tdma base reg chan 0 */
- 0x3D000 0x1000>; /* cesa base reg chan 0 */
- interrupts = <22>;
- interrupt-parent = <&PIC>;
-
- sram-handle = <&SRAM>;
- };
-
- usb@50000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <48 19>;
- interrupt-parent = <&PIC>;
- };
-
- xor@60000 {
- compatible = "mrvl,xor";
- reg = <0x60000 0x1000>;
- interrupts = <5 6 7 8>;
- interrupt-parent = <&PIC>;
- };
-
- sata@80000 {
- compatible = "mrvl,sata";
- reg = <0x80000 0x6000>;
- interrupts = <21>;
- interrupt-parent = <&PIC>;
- };
- };
-
- SRAM: sram@fd000000 {
- compatible = "mrvl,cesa-sram";
- reg = <0xfd000000 0x00100000>;
- };
-
- pci0: pcie@f1040000 {
- compatible = "mrvl,pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf1040000 0x2000>;
- bus-range = <0 255>;
- ranges = <0x02000000 0x0 0xf1300000 0xf1300000 0x0 0x04000000
- 0x01000000 0x0 0x00000000 0xf1100000 0x0 0x00100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&PIC>;
- interrupts = <44>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x1 */
- 0x0800 0x0 0x0 0x1 &PIC 0x9
- 0x0800 0x0 0x0 0x2 &PIC 0x9
- 0x0800 0x0 0x0 0x3 &PIC 0x9
- 0x0800 0x0 0x0 0x4 &PIC 0x9
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0xf1300000
- 0x02000000 0x0 0xf1300000
- 0x0 0x04000000
-
- 0x01000000 0x0 0x0
- 0x01000000 0x0 0x0
- 0x0 0x00100000>;
- };
- };
-
- chosen {
- stdin = "serial0";
- stdout = "serial0";
- };
-};
diff --git a/sys/dts/arm/dockstar.dts b/sys/dts/arm/dockstar.dts
deleted file mode 100644
--- a/sys/dts/arm/dockstar.dts
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright (c) 2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * This software was developed by Semihalf under sponsorship from
- * the FreeBSD Foundation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Seagate DockStar (Marvell SheevaPlug based) Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "seagate,DockStar";
- compatible = "DockStar";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- mpp = &MPP;
- serial0 = &serial0;
- serial1 = &serial1;
- soc = &SOC;
- sram = &SRAM;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR131";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x8000000>; // 128M at 0x0
- };
-
- localbus@f1000000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
-
- /* This reflects CPU decode windows setup for NAND access. */
- ranges = <0x0 0x2f 0xf9300000 0x00100000>;
-
- nand@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mrvl,nfc";
- reg = <0x0 0x0 0x00100000>;
- bank-width = <2>;
- device-width = <1>;
- };
- };
-
- SOC: soc88f6281@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <1>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x34>;
- pin-count = <50>;
- pin-map = <
- 0 1 /* MPP[0]: NF_IO[2] */
- 1 1 /* MPP[1]: NF_IO[3] */
- 2 1 /* MPP[2]: NF_IO[4] */
- 3 1 /* MPP[3]: NF_IO[5] */
- 4 1 /* MPP[4]: NF_IO[6] */
- 5 1 /* MPP[5]: NF_IO[7] */
- 6 1 /* MPP[6]: SYSRST_OUTn */
- 8 2 /* MPP[8]: UA0_RTS */
- 9 2 /* MPP[9]: UA0_CTS */
- 10 3 /* MPP[10]: UA0_TXD */
- 11 3 /* MPP[11]: UA0_RXD */
- 12 1 /* MPP[12]: SD_CLK */
- 13 1 /* MPP[13]: SD_CMD */
- 14 1 /* MPP[14]: SD_D[0] */
- 15 1 /* MPP[15]: SD_D[1] */
- 16 1 /* MPP[16]: SD_D[2] */
- 17 1 /* MPP[17]: SD_D[3] */
- 18 1 /* MPP[18]: NF_IO[0] */
- 19 1 /* MPP[19]: NF_IO[1] */
- 29 1 >; /* MPP[29]: TSMP[9] */
- };
-
- GPIO: gpio@10100 {
- #gpio-cells = <2>;
- compatible = "mrvl,gpio";
- reg = <0x10100 0x20>;
- gpio-controller;
- interrupts = <35 36 37 38 39 40 41>;
- interrupt-parent = <&PIC>;
- };
-
- rtc@10300 {
- compatible = "mrvl,rtc";
- reg = <0x10300 0x08>;
- };
-
- twsi@11000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11000 0x20>;
- interrupts = <43>;
- interrupt-parent = <&PIC>;
- };
-
- enet0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <12 13 14 11 46>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy0>;
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- };
- };
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <34>;
- interrupt-parent = <&PIC>;
- };
-
- crypto@30000 {
- compatible = "mrvl,cesa";
- reg = <0x30000 0x1000 /* tdma base reg chan 0 */
- 0x3D000 0x1000>; /* cesa base reg chan 0 */
- interrupts = <22>;
- interrupt-parent = <&PIC>;
-
- sram-handle = <&SRAM>;
- };
-
- usb@50000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <48 19>;
- interrupt-parent = <&PIC>;
- };
-
- xor@60000 {
- compatible = "mrvl,xor";
- reg = <0x60000 0x1000>;
- interrupts = <5 6 7 8>;
- interrupt-parent = <&PIC>;
- };
- };
-
- SRAM: sram@fd000000 {
- compatible = "mrvl,cesa-sram";
- reg = <0xfd000000 0x00100000>;
- };
-
- chosen {
- stdin = "serial0";
- stdout = "serial0";
- };
-};
diff --git a/sys/dts/arm/dreamplug-1001.dts b/sys/dts/arm/dreamplug-1001.dts
deleted file mode 100644
--- a/sys/dts/arm/dreamplug-1001.dts
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Copyright (c) 2013 Ian Lepore
- * Copyright (c) 2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * This software substantially based on work developed by Semihalf
- * under sponsorship from the FreeBSD Foundation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * GlobalScale Technologies DreamPlug Device Tree Source.
- *
- * This source is for version 10 revision 01 units with NOR SPI flash.
- * These units are marked "1001" on the serial number label.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "GlobalScale Technologies Dreamplug v1001";
- compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- mpp = &MPP;
- serial0 = &serial0;
- serial1 = &serial1;
- soc = &SOC;
- sram = &SRAM;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR131";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
-
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x20000000>; // 512M at 0x0
- };
-
- localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
- bank-count = <1>;
-
- /* This reflects CPU decode windows setup. */
- ranges = <0x0 0x1e 0xfa000000 0x00100000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x00100000>;
- bank-width = <2>;
- device-width = <1>;
- };
- };
-
- SOC: soc88f6281@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <1>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x34>;
- pin-count = <50>;
- pin-map = <
- 0 2 /* MPP[ 0]: SPI_SCn */
- 1 2 /* MPP[ 1]: SPI_MOSI */
- 2 2 /* MPP[ 2]: SPI_SCK */
- 3 2 /* MPP[ 3]: SPI_MISO */
- 4 1 /* MPP[ 4]: NF_IO[6] */
- 5 1 /* MPP[ 5]: NF_IO[7] */
- 6 1 /* MPP[ 6]: SYSRST_OUTn */
- 7 0 /* MPP[ 7]: GPO[7] */
- 8 1 /* MPP[ 8]: TW_SDA */
- 9 1 /* MPP[ 9]: TW_SCK */
- 10 3 /* MPP[10]: UA0_TXD */
- 11 3 /* MPP[11]: US0_RXD */
- 12 1 /* MPP[12]: SD_CLK */
- 13 1 /* MPP[13]: SD_CMD */
- 14 1 /* MPP[14]: SD_D[0] */
- 15 1 /* MPP[15]: SD_D[1] */
- 16 1 /* MPP[16]: SD_D[2] */
- 17 1 /* MPP[17]: SD_D[3] */
- 18 1 /* MPP[18]: NF_IO[0] */
- 19 1 /* MPP[19]: NF_IO[1] */
- 20 3 /* MPP[20]: GE1[ 0] */
- 21 3 /* MPP[21]: GE1[ 1] */
- 22 3 /* MPP[22]: GE1[ 2] */
- 23 3 /* MPP[23]: GE1[ 3] */
- 24 3 /* MPP[24]: GE1[ 4] */
- 25 3 /* MPP[25]: GE1[ 5] */
- 26 3 /* MPP[26]: GE1[ 6] */
- 27 3 /* MPP[27]: GE1[ 7] */
- 28 3 /* MPP[28]: GE1[ 8] */
- 29 3 /* MPP[29]: GE1[ 9] */
- 30 3 /* MPP[30]: GE1[10] */
- 31 3 /* MPP[31]: GE1[11] */
- 32 3 /* MPP[32]: GE1[12] */
- 33 3 /* MPP[33]: GE1[13] */
- 34 3 /* MPP[34]: GE1[14] */
- 35 3 /* MPP[35]: GE1[15] */
- 36 0 /* MPP[36]: GPIO[36] */
- 37 0 /* MPP[37]: GPIO[37] */
- 38 0 /* MPP[38]: GPIO[38] */
- 39 0 /* MPP[39]: GPIO[39] */
- 40 2 /* MPP[40]: TDM_SPI_SCK */
- 41 2 /* MPP[41]: TDM_SPI_MISO */
- 42 2 /* MPP[42]: TDM_SPI_MOSI */
- 43 0 /* MPP[43]: GPIO[43] */
- 44 0 /* MPP[44]: GPIO[44] */
- 45 0 /* MPP[45]: GPIO[45] */
- 46 0 /* MPP[46]: GPIO[46] */
- 47 0 /* MPP[47]: GPIO[47] */
- 48 0 /* MPP[48]: GPIO[48] */
- 49 0 /* MPP[49]: GPIO[49] */
- >;
- };
-
- GPIO: gpio@10100 {
- #gpio-cells = <3>;
- compatible = "mrvl,gpio";
- reg = <0x10100 0x20>;
- gpio-controller;
- interrupts = <35 36 37 38 39 40 41>;
- interrupt-parent = <&PIC>;
- pin-count = <50>;
- };
-
- gpioled@0 {
- compatible = "mrvl,gpioled";
-
- gpios = <&GPIO 47 2 0 /* GPIO[47] BT LED: OUT */
- &GPIO 48 2 0 /* GPIO[48] WLAN LED: OUT */
- &GPIO 49 2 0>; /* GPIO[49] WLAN AP LED: OUT */
- };
-
- rtc@10300 {
- compatible = "mrvl,rtc";
- reg = <0x10300 0x08>;
- };
-
- twsi@11000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11000 0x20>;
- interrupts = <43>;
- interrupt-parent = <&PIC>;
- };
-
- enet0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <12 13 14 11 46>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy0>;
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- };
- };
- };
-
- enet1: ethernet@76000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x76000 0x02000>;
- ranges = <0x0 0x76000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <16 17 18 15 47>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy1>;
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <34>;
- interrupt-parent = <&PIC>;
- };
-
- crypto@30000 {
- compatible = "mrvl,cesa";
- reg = <0x30000 0x1000 /* tdma base reg chan 0 */
- 0x3D000 0x1000>; /* cesa base reg chan 0 */
- interrupts = <22>;
- interrupt-parent = <&PIC>;
-
- sram-handle = <&SRAM>;
- };
-
- usb@50000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <48 19>;
- interrupt-parent = <&PIC>;
- };
-
- xor@60000 {
- compatible = "mrvl,xor";
- reg = <0x60000 0x1000>;
- interrupts = <5 6 7 8>;
- interrupt-parent = <&PIC>;
- };
-
- sata@80000 {
- compatible = "mrvl,sata";
- reg = <0x80000 0x6000>;
- interrupts = <21>;
- interrupt-parent = <&PIC>;
- };
-
- sdio@90000 {
- compatible = "mrvl,sdio";
- reg = <0x90000 0x134>;
- interrupts = <28>;
- interrupt-parent = <&PIC>;
- };
- };
-
- SRAM: sram@fd000000 {
- compatible = "mrvl,cesa-sram";
- reg = <0xfd000000 0x00100000>;
- };
-
- chosen {
- stdin = "serial0";
- stdout = "serial0";
- };
-
-};
diff --git a/sys/dts/arm/dreamplug-1001N.dts b/sys/dts/arm/dreamplug-1001N.dts
deleted file mode 100644
--- a/sys/dts/arm/dreamplug-1001N.dts
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Copyright (c) 2013 Ian Lepore
- * Copyright (c) 2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * This software substantially based on work developed by Semihalf
- * under sponsorship from the FreeBSD Foundation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * GlobalScale Technologies DreamPlug Device Tree Source.
- *
- * This source is for version 10 revision 01 units with NAND flash.
- * These units are marked "1001N" on the serial number label.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "GlobalScale Technologies Dreamplug v1001N";
- compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- mpp = &MPP;
- serial0 = &serial0;
- serial1 = &serial1;
- soc = &SOC;
- sram = &SRAM;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR131";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
-
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x20000000>; // 512M at 0x0
- };
-
- localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
- bank-count = <1>;
-
- /* This reflects CPU decode windows setup. */
- ranges = <0x0 0x2f 0xf9300000 0x00100000>;
-
- nand@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mrvl,nfc";
- reg = <0x0 0x0 0x00100000>;
- bank-width = <2>;
- device-width = <1>;
-
- // Slice info reported by builtin linux when it boots...
- //[ 11.161328] 0x00000000-0x00100000 : "u-boot"
- //[ 11.167431] 0x00100000-0x00500000 : "uImage"
- //[ 11.173471] 0x00500000-0x20000000 : "root"
-
- slice@0 {
- reg = <0x0 0x100000>;
- label = "u-boot";
- read-only;
- };
-
- slice@200000 {
- reg = <0x100000 0x40000>;
- label = "uImage";
- };
-
- slice@500000 {
- reg = <0x500000 0x1FB00000>;
- label = "root";
- };
- };
- };
-
- SOC: soc88f6281@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <1>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x34>;
- pin-count = <50>;
- pin-map = <
- 0 1 /* MPP[ 0]: NF_IO[2] */
- 1 1 /* MPP[ 1]: NF_IO[3] */
- 2 1 /* MPP[ 2]: NF_IO[4] */
- 3 1 /* MPP[ 3]: NF_IO[5] */
- 4 1 /* MPP[ 4]: NF_IO[6] */
- 5 1 /* MPP[ 5]: NF_IO[7] */
- 6 1 /* MPP[ 6]: SYSRST_OUTn */
- 7 0 /* MPP[ 7]: GPO[7] */
- 8 1 /* MPP[ 8]: TW_SDA */
- 9 1 /* MPP[ 9]: TW_SCK */
- 10 3 /* MPP[10]: UA0_TXD */
- 11 3 /* MPP[11]: US0_RXD */
- 12 1 /* MPP[12]: SD_CLK */
- 13 1 /* MPP[13]: SD_CMD */
- 14 1 /* MPP[14]: SD_D[0] */
- 15 1 /* MPP[15]: SD_D[1] */
- 16 1 /* MPP[16]: SD_D[2] */
- 17 1 /* MPP[17]: SD_D[3] */
- 18 1 /* MPP[18]: NF_IO[0] */
- 19 1 /* MPP[19]: NF_IO[1] */
- 20 3 /* MPP[20]: GE1[ 0] */
- 21 3 /* MPP[21]: GE1[ 1] */
- 22 3 /* MPP[22]: GE1[ 2] */
- 23 3 /* MPP[23]: GE1[ 3] */
- 24 3 /* MPP[24]: GE1[ 4] */
- 25 3 /* MPP[25]: GE1[ 5] */
- 26 3 /* MPP[26]: GE1[ 6] */
- 27 3 /* MPP[27]: GE1[ 7] */
- 28 3 /* MPP[28]: GE1[ 8] */
- 29 3 /* MPP[29]: GE1[ 9] */
- 30 3 /* MPP[30]: GE1[10] */
- 31 3 /* MPP[31]: GE1[11] */
- 32 3 /* MPP[32]: GE1[12] */
- 33 3 /* MPP[33]: GE1[13] */
- 34 3 /* MPP[34]: GE1[14] */
- 35 3 /* MPP[35]: GE1[15] */
- 36 0 /* MPP[36]: GPIO[36] */
- 37 0 /* MPP[37]: GPIO[37] */
- 38 0 /* MPP[38]: GPIO[38] */
- 39 0 /* MPP[39]: GPIO[39] */
- 40 2 /* MPP[40]: TDM_SPI_SCK */
- 41 2 /* MPP[41]: TDM_SPI_MISO */
- 42 2 /* MPP[42]: TDM_SPI_MOSI */
- 43 0 /* MPP[43]: GPIO[43] */
- 44 0 /* MPP[44]: GPIO[44] */
- 45 0 /* MPP[45]: GPIO[45] */
- 46 0 /* MPP[46]: GPIO[46] */
- 47 0 /* MPP[47]: GPIO[47] */
- 48 0 /* MPP[48]: GPIO[48] */
- 49 0 /* MPP[49]: GPIO[49] */
- >;
- };
-
- GPIO: gpio@10100 {
- #gpio-cells = <3>;
- compatible = "mrvl,gpio";
- reg = <0x10100 0x20>;
- gpio-controller;
- interrupts = <35 36 37 38 39 40 41>;
- interrupt-parent = <&PIC>;
- pin-count = <50>;
- };
-
- gpioled@0 {
- compatible = "mrvl,gpioled";
-
- gpios = <&GPIO 47 2 0 /* GPIO[47] BT LED: OUT */
- &GPIO 48 2 0 /* GPIO[48] WLAN LED: OUT */
- &GPIO 49 2 0>; /* GPIO[49] WLAN AP LED: OUT */
- };
-
- rtc@10300 {
- compatible = "mrvl,rtc";
- reg = <0x10300 0x08>;
- };
-
- twsi@11000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11000 0x20>;
- interrupts = <43>;
- interrupt-parent = <&PIC>;
- };
-
- enet0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <12 13 14 11 46>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy0>;
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- };
- };
- };
-
- enet1: ethernet@76000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x76000 0x02000>;
- ranges = <0x0 0x76000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <16 17 18 15 47>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy1>;
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <34>;
- interrupt-parent = <&PIC>;
- };
-
- crypto@30000 {
- compatible = "mrvl,cesa";
- reg = <0x30000 0x1000 /* tdma base reg chan 0 */
- 0x3D000 0x1000>; /* cesa base reg chan 0 */
- interrupts = <22>;
- interrupt-parent = <&PIC>;
-
- sram-handle = <&SRAM>;
- };
-
- usb@50000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <48 19>;
- interrupt-parent = <&PIC>;
- };
-
- xor@60000 {
- compatible = "mrvl,xor";
- reg = <0x60000 0x1000>;
- interrupts = <5 6 7 8>;
- interrupt-parent = <&PIC>;
- };
-
- sata@80000 {
- compatible = "mrvl,sata";
- reg = <0x80000 0x6000>;
- interrupts = <21>;
- interrupt-parent = <&PIC>;
- };
-
- sdio@90000 {
- compatible = "mrvl,sdio";
- reg = <0x90000 0x134>;
- interrupts = <28>;
- interrupt-parent = <&PIC>;
- };
- };
-
- SRAM: sram@fd000000 {
- compatible = "mrvl,cesa-sram";
- reg = <0xfd000000 0x00100000>;
- };
-
- chosen {
- stdin = "serial0";
- stdout = "serial0";
- };
-
-};
diff --git a/sys/dts/arm/ea3250.dts b/sys/dts/arm/ea3250.dts
deleted file mode 100644
--- a/sys/dts/arm/ea3250.dts
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (c) 2011 Jakub Klama <jceel@FreeBSD.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Embedded Artists LPC3250-Kit Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "ea,LPC3250-KIT";
- compatible = "LPC3250-KIT";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- soc = &soc;
- serial4 = &serial4;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,926EJ-S";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x4000000>; // 64M at 0x80000000
- };
-
- soc: ahb7@40000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x40000000 0x10000000>;
- bus-frequency = <13000000>;
-
- pwr@4000 {
- compatible = "lpc,pwr";
- reg = <0x4000 0x4000>;
- };
-
- PIC: pic@8000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x8000 0xc000>;
- compatible = "lpc,pic";
- };
-
- timer@44000 {
- compatible = "lpc,timer";
- reg = <0x44000 0x4000
- 0x4c000 0x4000>;
- interrupts = <16 17>;
- interrupt-parent = <&PIC>;
- };
-
- rtc@24000 {
- compatible = "lpc,rtc";
- reg = <0x24000 0x4000>;
- interrupts = <52>;
- interrupt-parent = <&PIC>;
- };
-
- serial0: serial@14000 {
- compatible = "lpc,hsuart";
- status = "disabled";
- reg = <0x14000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <26>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@18000 {
- compatible = "lpc,hsuart";
- status = "disabled";
- reg = <0x18000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <25>;
- interrupt-parent = <&PIC>;
- };
-
- serial2: serial@80000 {
- compatible = "lpc,uart";
- status = "disabled";
- reg = <0x80000 0x20>;
- reg-shift = <2>;
- clock-frequency = <13000000>;
- interrupts = <7>;
- interrupt-parent = <&PIC>;
- };
-
- serial3: serial@88000 {
- compatible = "lpc,uart";
- status = "disabled";
- reg = <0x88000 0x20>;
- reg-shift = <2>;
- clock-frequency = <13000000>;
- interrupts = <8>;
- interrupt-parent = <&PIC>;
- };
-
- serial4: serial@90000 {
- compatible = "lpc,uart";
- reg = <0x90000 0x20>;
- reg-shift = <2>;
- clock-frequency = <13000000>;
- current-speed = <115200>;
- interrupts = <9>;
- interrupt-parent = <&PIC>;
- };
-
- serial5: serial@98000 {
- compatible = "lpc,uart";
- status = "disabled";
- reg = <0x98000 0x20>;
- reg-shift = <2>;
- clock-frequency = <13000000>;
- interrupts = <10>;
- interrupt-parent = <&PIC>;
- };
-
- serial6: serial@1c000 {
- compatible = "lpc,uart";
- status = "disabled";
- reg = <0x1c000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <24>;
- interrupt-parent = <&PIC>;
- };
-
- gpio@28000 {
- compatible = "lpc,gpio";
- reg = <0x28000 0x4000>;
- };
- };
-
- ahb6@30000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x30000000 0x10000000>;
-
- dmac@1000000 {
- compatible = "lpc,dmac";
- reg = <0x1000000 0x20000>;
- interrupts = <28>;
- interrupt-parent = <&PIC>;
- };
-
- usb@1020000 {
- compatible = "lpc,usb-ohci", "usb-ohci";
- reg = <0x1020000 0x20000>;
- interrupts = <59>;
- interrupt-parent = <&PIC>;
- };
-
- lpcfb@1040000 {
- compatible = "lpc,fb";
- reg = <0x1040000 0x20000>;
- interrupts = <14>;
- interrupt-parent = <&PIC>;
-
- /* Screen parameters: */
- is-tft = <1>;
- horizontal-resolution = <240>;
- vertical-resolution = <320>;
- bits-per-pixel = <16>;
- pixel-clock = <121654>;
- left-margin = <28>;
- right-margin = <10>;
- upper-margin = <2>;
- lower-margin = <2>;
- hsync-len = <3>;
- vsync-len = <2>;
- };
-
- lpe@1060000 {
- compatible = "lpc,ethernet";
- reg = <0x1060000 0x20000>;
- interrupts = <29>;
- interrupt-parent = <&PIC>;
- local-mac-address = [ 00 1a f1 01 1f 23 ];
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lpc,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- };
- };
-
- };
- };
-
- ahb5@20000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x20000000 0x10000000>;
-
- spi0@84000 {
- compatible = "lpc,spi";
- reg = <0x84000 0x4000>;
- interrupts = <20>;
- interrupt-parent = <&PIC>;
- };
-
- spi1@8c000 {
- compatible = "lpc,spi";
- status = "disabled";
- reg = <0x8c000 0x4000>;
- interrupts = <21>;
- interrupt-parent = <&PIC>;
- };
-
- lpcmmc@98000 {
- compatible = "lpc,mmc";
- reg = <0x98000 0x4000>;
- interrupts = <15 13>;
- interrupt-parent = <&PIC>;
- };
- };
-
- chosen {
- stdin = "serial4";
- stdout = "serial4";
- };
-};
diff --git a/sys/dts/arm/rt1310a.dtsi b/sys/dts/arm/rt1310a.dtsi
deleted file mode 100644
--- a/sys/dts/arm/rt1310a.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (c) 2011 Jakub Klama <jceel@FreeBSD.org>
- * Copyright (c) 2015 Hiroki Mori
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Ralink RT1310A Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/ {
- compatible = "ralink,rt1310a-soc";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- serial0 = &serial0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,926EJ-S";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x1000000>; // 16M at 0x40000000
- };
-
- localbus@1f000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x1f000000 0x400000>;
- };
-
- ahb@19C00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x19C00000 0xE0000>;
- bus-frequency = <13000000>;
-
- PIC: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x40000 0x20000>;
- compatible = "rt,pic";
- };
-
- fvmdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fv,mdio";
- reg = <0x80000 0x20000>;
- };
-
- enet0:fv_mac0@80000 {
- compatible = "fv,ethernet";
- reg = <0x80000 0x20000>;
- interrupts = <7>;
- interrupt-parent = <&PIC>;
-
- };
-
- enet1:fv_mac1@A0000 {
- compatible = "fv,ethernet";
- reg = <0xA0000 0x20000>;
- interrupts = <8>;
- interrupt-parent = <&PIC>;
- };
-
- };
-
- apb@1E800000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x1E800000 0x800000>;
- bus-frequency = <75000000>;
-
- timer@000000 {
- compatible = "rt,timer";
- reg = <0x0 0x10
- 0x10 0x10
- 0x20 0x10
- 0x30 0x10>;
- interrupts = <3 4 5>;
- interrupt-parent = <&PIC>;
- };
-
- rtc@20000 {
- compatible = "rt,rtc";
- interrupts = <6>;
- reg = <0x20000 0x20000>;
- };
-
- serial0: serial@40000 {
- compatible = "ns16550";
- reg = <0x40000 0x20000>;
- interrupts = <1>;
- reg-shift = <2>;
- clock-frequency = <6758400>;
- current-speed = <38400>;
- interrupt-parent = <&PIC>;
- };
-
- gpio0: gpio@A0000 {
- compatible = "ralink,rt1310-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <8>;
- reg = <0xA0000 0x20000>;
- };
- };
-
-
-/*
- chosen {
- stdin = "serial0";
- stdout = "serial0";
- };
-*/
-};
-
diff --git a/sys/dts/arm/sheevaplug.dts b/sys/dts/arm/sheevaplug.dts
deleted file mode 100644
--- a/sys/dts/arm/sheevaplug.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (c) 2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * This software was developed by Semihalf under sponsorship from
- * the FreeBSD Foundation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Marvell SheevaPlug Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "mrvl,SheevaPlug";
- compatible = "SheevaPlug";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- mpp = &MPP;
- serial0 = &serial0;
- serial1 = &serial1;
- soc = &SOC;
- sram = &SRAM;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR131";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x20000000>; // 512M at 0x0
- };
-
- localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
- bank-count = <3>;
-
- /* This reflects CPU decode windows setup. */
- ranges = <0x0 0x2f 0xf9300000 0x00100000>;
-
- nand@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mrvl,nfc";
- reg = <0x0 0x0 0x00100000>;
- bank-width = <2>;
- device-width = <1>;
-
- slice@0 {
- reg = <0x0 0x200000>;
- label = "u-boot";
- read-only;
- };
-
- slice@200000 {
- reg = <0x200000 0x1fe00000>;
- label = "root";
- };
- };
- };
-
- SOC: soc88f6281@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <1>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x34>;
- pin-count = <50>;
- pin-map = <
- 0 1 /* MPP[0]: NF_IO[2] */
- 1 1 /* MPP[1]: NF_IO[3] */
- 2 1 /* MPP[2]: NF_IO[4] */
- 3 1 /* MPP[3]: NF_IO[5] */
- 4 1 /* MPP[4]: NF_IO[6] */
- 5 1 /* MPP[5]: NF_IO[7] */
- 6 1 /* MPP[6]: SYSRST_OUTn */
- 8 2 /* MPP[8]: UA0_RTS */
- 9 2 /* MPP[9]: UA0_CTS */
- 10 3 /* MPP[10]: UA0_TXD */
- 11 3 /* MPP[11]: UA0_RXD */
- 12 1 /* MPP[12]: SD_CLK */
- 13 1 /* MPP[13]: SD_CMD */
- 14 1 /* MPP[14]: SD_D[0] */
- 15 1 /* MPP[15]: SD_D[1] */
- 16 1 /* MPP[16]: SD_D[2] */
- 17 1 /* MPP[17]: SD_D[3] */
- 18 1 /* MPP[18]: NF_IO[0] */
- 19 1 /* MPP[19]: NF_IO[1] */
- 29 1 >; /* MPP[29]: TSMP[9] */
- };
-
- GPIO: gpio@10100 {
- #gpio-cells = <2>;
- compatible = "mrvl,gpio";
- reg = <0x10100 0x20>;
- gpio-controller;
- interrupts = <35 36 37 38 39 40 41>;
- interrupt-parent = <&PIC>;
- };
-
- rtc@10300 {
- compatible = "mrvl,rtc";
- reg = <0x10300 0x08>;
- };
-
- twsi@11000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,twsi";
- reg = <0x11000 0x20>;
- interrupts = <43>;
- interrupt-parent = <&PIC>;
- };
-
- enet0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V2";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <12 13 14 11 46>;
- interrupt-parent = <&PIC>;
- phy-handle = <&phy0>;
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- };
- };
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <34>;
- interrupt-parent = <&PIC>;
- };
-
- crypto@30000 {
- compatible = "mrvl,cesa";
- reg = <0x30000 0x1000 /* tdma base reg chan 0 */
- 0x3D000 0x1000>; /* cesa base reg chan 0 */
- interrupts = <22>;
- interrupt-parent = <&PIC>;
-
- sram-handle = <&SRAM>;
- };
-
- usb@50000 {
- compatible = "mrvl,usb-ehci", "usb-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <48 19>;
- interrupt-parent = <&PIC>;
- };
-
- xor@60000 {
- compatible = "mrvl,xor";
- reg = <0x60000 0x1000>;
- interrupts = <5 6 7 8>;
- interrupt-parent = <&PIC>;
- };
- };
-
- SRAM: sram@fd000000 {
- compatible = "mrvl,cesa-sram";
- reg = <0xfd000000 0x00100000>;
- };
-
- chosen {
- stdin = "serial0";
- stdout = "serial0";
- };
-};
diff --git a/sys/dts/arm/ts7800.dts b/sys/dts/arm/ts7800.dts
deleted file mode 100644
--- a/sys/dts/arm/ts7800.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright (c) 2010 The FreeBSD Foundation
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Technologic Systems TS-7800 Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "mrvl,TS-7800";
- compatible = "DB-88F5182-BP", "DB-88F5182-BP-A";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &mge0;
- serial0 = &serial0;
- serial1 = &serial1;
- mpp = &MPP;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "ARM,88FR531";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x08000000>; // 128M at 0x0
- };
-
- localbus@f1000000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "mrvl,lbc";
-
- /* This reflects CPU decode windows setup. */
- ranges = <0x0 0x0f 0xf9300000 0x00100000
- 0x1 0x1e 0xfa000000 0x00100000
- 0x2 0x1d 0xfa100000 0x02000000>;
- };
-
- soc88f5182@f1000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0xf1000000 0x00100000>;
- bus-frequency = <0>;
-
- PIC: pic@20200 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x20200 0x3c>;
- compatible = "mrvl,pic";
- };
-
- timer@20300 {
- compatible = "mrvl,timer";
- reg = <0x20300 0x30>;
- interrupts = <0>;
- interrupt-parent = <&PIC>;
- mrvl,has-wdt;
- };
-
- MPP: mpp@10000 {
- #pin-cells = <2>;
- compatible = "mrvl,mpp";
- reg = <0x10000 0x54>;
- pin-count = <20>;
- pin-map = <
- 16 0 /* MPP[16]: UA1_RXD */
- 17 0 /* MPP[17]: UA1_TXD */
- 19 0 >; /* MPP[19]: UA1_RTS */
- };
-
- mge0: ethernet@72000 {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "V1";
- compatible = "mrvl,ge";
- reg = <0x72000 0x2000>;
- ranges = <0x0 0x72000 0x2000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <18 19 20 21 22>;
- interrupt-parent = <&PIC>;
-
- phy-handle = <&phy0>;
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mrvl,mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- };
- };
- };
-
- serial0: serial@12000 {
- compatible = "ns16550";
- reg = <0x12000 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- serial1: serial@12100 {
- compatible = "ns16550";
- reg = <0x12100 0x20>;
- reg-shift = <2>;
- clock-frequency = <0>;
- interrupts = <4>;
- interrupt-parent = <&PIC>;
- };
- };
-
- chosen {
- stdin = "serial0";
- stdout = "serial0";
- };
-};
diff --git a/sys/dts/arm/vsatv102-m6.dts b/sys/dts/arm/vsatv102-m6.dts
deleted file mode 100644
--- a/sys/dts/arm/vsatv102-m6.dts
+++ /dev/null
@@ -1,309 +0,0 @@
-/*-
- * Copyright (c) 2013-2015 John Wehle <john@feith.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD$
- */
-
-/*
- * The ordering of certain devices is significant (e.g. usb depends on
- * usb-phy which depends on gpio, also the timer should appear early on
- * to provide a reasonably accurate DELAY implementation).
- *
- * Both usb-phys devices must be configured to prevent the usb controller
- * from hanging during initialization.
- */
-
-/dts-v1/;
-
-/memreserve/ 0x84900000 0x00600000; /* 6MB frame buffer */
-
-#include "meson6.dtsi"
-
-/ {
- /*
- * My development unit visually appears to be a Visson ATV-102
- * and the specs for both my unit and the Visson ATV-102 say
- * the SoC is an aml8726-m3. However the uboot prompt says
- * m6_mbx_v1, the RTC is located on SECBUS2 instead of AOBUS,
- * and there are two cores so it seems my unit is a newer
- * version using the later processor.
- */
-
- model = "visson,atv-102";
- compatible = "visson,atv-102", "amlogic,meson6";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- soc = &soc;
- screen = &screen;
- uart0 = &uart_AO;
- };
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x40000000>; /* 1GB RAM */
- };
-
- soc: soc {
- device_type = "soc";
- bus-frequency = <0>;
-
- pic: pic@c1109a40 {
- device_type = "interrupt-controller";
- compatible = "amlogic,aml8726-pic";
- reg = <0xc1109a40 128>; /* cbus 0x2690 */
-
- interrupt-controller;
- #interrupt-cells = <3>;
- };
-
- scu: scu@c4300000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0xc4300000 0x1000>;
- };
-
- cpuconfig: cpuconfig@d901ff80 {
- compatible = "amlogic,aml8726-cpuconfig";
- reg = <0xd901ff80 8>;
- };
-
- ccm@c1104140 {
- compatible = "amlogic,aml8726-ccm";
- reg = <0xc1104140 20>; /* cbus 0x1050 */
-
- functions = "ethernet", "i2c", "rng", "sdio",
- "uart-a", "uart-b", "uart-c",
- "usb-a", "usb-b";
- };
-
- pinctrl: pinctrl@c11080b0 {
- compatible = "amlogic,aml8726-pinctrl";
- reg = <0xc11080b0 40>, /* mux */
- <0xc11080e8 24>, /* pu/pd */
- <0xc11080e8 24>, /* pull enable */
- <0xc8100014 4>, /* ao mux */
- <0xc810002c 4>, /* ao pu/pd */
- <0xc810002c 4>; /* ao pull enable */
-
- /*
- * Currently only pin muxing that deviates
- * from the power on default of gpio is
- * specified here.
- */
-
- pinctrl-names = "default";
- pinctrl-0 = <&pins_uartao &pins_ethernet &pins_hdmi>;
-
- pins_ethernet: ethernet {
- amlogic,pins = "ref_clk_in",
- "tx_clk", "tx_en",
- "tx_d0", "tx_d1",
- "tx_d2", "tx_d3",
- "rx_clk", "rx_dv",
- "rx_d0", "rx_d1",
- "rx_d2", "rx_d3",
- "mdc", "mdio";
- amlogic,function = "ethernet";
- };
-
- pins_hdmi: hdmi {
- amlogic,pins = "cec", "hpd",
- "scl", "sda";
- amlogic,function = "hdmi";
- };
-
- pins_sdio_b: sdio_b {
- amlogic,pins = "clk", "cmd",
- "d0", "d1",
- "d2", "d3";
- amlogic,function = "sdio-b";
- };
-
- pins_uartao: uartao {
- amlogic,pins = "tx", "rx";
- amlogic,function = "uart-ao";
- };
- };
-
- rtc@da004340 {
- compatible = "amlogic,aml8726-rtc";
- reg = <0xda004340 20>; /* secbus2 0xd0 */
- interrupts = <0 72 1>; /* AM_IRQ2(8) */
- };
-
- clkmsr: clkmsr@c1108758 {
- compatible = "amlogic,aml8726-clkmsr";
- reg = <0xc1108758 16>; /* cbus 0x21d6 */
-
- clocks = <&clk81>;
- };
-
- gpioao: gpio@c8100024 {
- /* gpio unit 7 */
- compatible = "amlogic,aml8726-gpio";
- reg = <0xc8100024 4>, /* oen aobus 0x9 */
- <0xc8100024 4>, /* out */
- <0xc8100028 4>; /* in */
-
- gpio-controller;
- #gpio-cells = <1>;
- pin-count = <12>;
- };
-
- gpio5: gpio@c110806c {
- compatible = "amlogic,aml8726-gpio";
- reg = <0xc110806c 4>, /* oen cbus 0x201b */
- <0xc1108070 4>, /* out */
- <0xc1108074 4>; /* in */
-
- gpio-controller;
- #gpio-cells = <1>;
- pin-count = <32>;
- };
-
- gpio6: gpio@c1108020 {
- compatible = "amlogic,aml8726-gpio";
- reg = <0xc1108020 4>, /* oen cbus 0x2008 */
- <0xc1108024 4>, /* out */
- <0xc1108028 4>; /* in */
-
- gpio-controller;
- #gpio-cells = <1>;
- pin-count = <29>;
- };
-
- mmc@c1108c20 {
- compatible = "amlogic,aml8726-mmc";
- reg = <0xc1108c20 32>; /* cbus 0x2308 */
- interrupts = <0 28 1>; /* AM_IRQ0(28) */
-
- clocks = <&clk81>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pins_sdio_b>;
-
- mmc-voltages = "3.3";
-
- mmc-pwr-en = <&gpio5 31 0>; /* card_8 */
- ins-detect = <&gpio5 29 0>; /* card_6 */
- };
-
- rng@c1108100 {
- compatible = "amlogic,aml8726-rng";
- reg = <0xc1108100 8>; /* cbus 0x2040 */
- };
-
- usb-phy@c1108400 {
- /* usb-a phy */
- compatible = "amlogic,aml8726-m6-usb-phy";
- reg = <0xc1108400 32>; /* cbus 0x2100 */
- };
-
- usb-phy@c1108420 {
- /* usb-b phy */
- compatible = "amlogic,aml8726-m6-usb-phy";
- reg = <0xc1108420 32>; /* cbus 0x2108 */
-
- usb-pwr-en = <&gpioao 3 1>, /* gpioao_3 vbus */
- <&gpio6 11 0>; /* gpioe_11 wifi */
- };
-
- usb@c9040000 {
- /* usb-a */
- compatible = "synopsys,designware-hs-otg2";
- reg = <0xc9040000 0x40000>; /* ahbbus 0x40000*/
- interrupts = <0 30 4>; /* AM_IRQ0(30) */
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usb@c90c0000 {
- /* usb-b */
- compatible = "synopsys,designware-hs-otg2";
- reg = <0xc90c0000 0x40000>; /* ahbbus 0xc0000 */
- interrupts = <0 31 4>; /* AM_IRQ0(31) */
- #address-cells = <1>;
- #size-cells = <0>;
-
- dr_mode = "host";
- };
-
- eth@c9410000 {
- /* ethernet */
- compatible = "snps,dwmac";
- reg = <0xc9410000 0x2000>; /* ahbbus 0x410000 */
- interrupts = <0 8 1>; /* AM_IRQ0(8) */
- #address-cells = <1>;
- #size-cells = <0>;
-
- eth-phy-rst = <&gpio5 15 0>; /* gpioy_15 phy-rst */
- };
-
- screen: fb@c8006324 {
- device_type = "display";
- compatible = "amlogic,aml8726-fb";
- reg = <0xc8006324 12>, /* CANVAS */
- <0xc1106800 1024>, /* VIU */
- <0xc1107400 1024>; /* VPP */
- interrupts = <0 2 1>, /* AM_IRQ0(2) */
- <0 3 1>, /* AM_IRQ0(3) */
- <0 12 1>, /* AM_IRQ0(12) */
- <0 13 1>; /* AM_IRQ0(13) */
-
- address = <0x84900000>; /* match memreserve */
- width = <720>;
- height = <480>;
- depth = <24>;
- linebytes = <2160>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- sys_led {
- gpios = <&gpioao 2>; /* gpioao_2 sys_led */
- label = "sys_led";
-
- default-state = "on";
- };
- };
-
- chosen {
- stdin = "uart0";
- stdout = "uart0";
- };
-};
-
-&clk81 {
- clock-frequency = <0>;
-};
-
-&uart_AO {
- status = "okay";
- current-speed = <115200>;
-};
diff --git a/sys/dts/arm/wzr2-g300n.dts b/sys/dts/arm/wzr2-g300n.dts
deleted file mode 100644
--- a/sys/dts/arm/wzr2-g300n.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (c) 2015 Hiroki Mori
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Buffalo WZR2-G300N Device Tree Source.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-#include "rt1310a.dtsi"
-
-/ {
- compatible = "WZR2-G300N", "ralink,rt1310a-soc";
- model = "WZR2-G300N";
-
- flash@1f000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x1f000000 0x400000>; // 4M at 0x1f000000
-
- partition@0 {
- reg = <0x00000000 0x0000e000>;
- label = "uboot";
- };
- partition@1 {
- reg = <0x0000e000 0x00002000>;
- label = "uboot_env";
- };
- partition@2 {
- reg = <0x00010000 0x000f0000>;
- label = "kernel";
- };
- partition@3 {
- reg = <0x00100000 0x002d0000>;
- label = "rootfs";
- };
- partition@4 {
- reg = <0x003d0000 0x00010000>;
- label = "config";
- };
- partition@5 {
- reg = <0x00010000 0x003c0000>;
- label = "upgrade";
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- status {
- label = "status";
- gpios = <&gpio0 4 0>;
- };
- };
-
- ip17x@0 {
- compatible = "icplus,ip17x";
- mii-poll = <0>;
- };
-
-};
-
-&enet0 {
- local-mac-address = [ 00 1a f1 01 1f 23 ];
-};
-
-&enet1 {
- local-mac-address = [ 00 1a f1 01 1f 24 ];
-};
diff --git a/sys/dts/arm/yyhd18-m3.dts b/sys/dts/arm/yyhd18-m3.dts
deleted file mode 100644
--- a/sys/dts/arm/yyhd18-m3.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-/*-
- * Copyright (c) 2015 John Wehle <john@feith.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD$
- */
-
-/*
- * The ordering of certain devices is significant (e.g. usb depends on
- * usb-phy which depends on gpio, also the timer should appear early on
- * to provide a reasonably accurate DELAY implementation).
- */
-
-/dts-v1/;
-
-/memreserve/ 0x84900000 0x00600000; /* 6MB frame buffer */
-
-#include "meson3.dtsi"
-
-/ {
- /*
- * My development unit is a Yiyate Android TV Box containing
- * a HD18 motherboard and an aml8726-m3 SoC ... later versions
- * shipped with an aml8726-m6. Printenv in uboot shows m3-oplay
- * as the boardname supplied as part of mmcargs.
- */
-
- model = "yiyate,hd18-m3";
- compatible = "yiyate,hd18-m3", "amlogic,meson3";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- soc = &soc;
- screen = &screen;
- uart0 = &uart_AO;
- };
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x40000000>; /* 1GB RAM */
- };
-
- soc: soc {
- device_type = "soc";
- bus-frequency = <0>;
-
- ccm@c1104140 {
- compatible = "amlogic,aml8726-ccm";
- reg = <0xc1104140 20>; /* cbus 0x1050 */
-
- functions = "ethernet", "i2c", "rng", "sdio",
- "uart-a", "uart-b", "uart-c",
- "usb-a", "usb-b";
- };
-
- pinctrl: pinctrl@c11080b0 {
- compatible = "amlogic,aml8726-pinctrl";
- reg = <0xc11080b0 40>, /* mux */
- <0xc11080e8 24>, /* pu/pd */
- <0xc11080e8 24>, /* pull enable */
- <0xc8100014 4>, /* ao mux */
- <0xc810002c 4>, /* ao pu/pd */
- <0xc810002c 4>; /* ao pull enable */
-
- /*
- * Currently only pin muxing that deviates
- * from the power on default of gpio is
- * specified here.
- */
-
- pinctrl-names = "default";
- pinctrl-0 = <&pins_uartao &pins_ethernet &pins_hdmi>;
-
- pins_ethernet: ethernet {
- amlogic,pins = "clk_out", "tx_en",
- "tx_d0", "tx_d1",
- "crs_dv", "rx_err",
- "rx_d0", "rx_d1",
- "mdc", "mdio";
- amlogic,function = "ethernet";
- };
-
- pins_hdmi: hdmi {
- amlogic,pins = "cec", "hpd",
- "scl", "sda";
- amlogic,function = "hdmi";
- };
-
- pins_sdio_b: sdio_b {
- amlogic,pins = "clk", "cmd",
- "d0", "d1",
- "d2", "d3";
- amlogic,function = "sdio-b";
- };
-
- pins_uartao: uartao {
- amlogic,pins = "tx", "rx";
- amlogic,function = "uart-ao";
- };
- };
-
- rtc@c8100740 {
- compatible = "amlogic,aml8726-rtc";
- reg = <0xc8100740 20>; /* aobus 0x1d0 */
- interrupts = <0 72 1>; /* AM_IRQ2(8) */
- };
-
- clkmsr: clkmsr@c1108758 {
- compatible = "amlogic,aml8726-clkmsr";
- reg = <0xc1108758 16>; /* cbus 0x21d6 */
-
- clocks = <&clk81>;
- };
-
- gpio5: gpio@c110806c {
- compatible = "amlogic,aml8726-gpio";
- reg = <0xc110806c 4>, /* oen cbus 0x201b */
- <0xc1108070 4>, /* out */
- <0xc1108074 4>; /* in */
-
- gpio-controller;
- #gpio-cells = <1>;
- pin-count = <32>;
- };
-
- mmc@c1108c20 {
- compatible = "amlogic,aml8726-mmc";
- reg = <0xc1108c20 32>; /* cbus 0x2308 */
- interrupts = <0 28 1>; /* AM_IRQ0(28) */
-
- clocks = <&clk81>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pins_sdio_b>;
-
- mmc-voltages = "3.3";
-
- mmc-pwr-en = <&gpio5 31 0>; /* card_8 */
- ins-detect = <&gpio5 29 0>; /* card_6 */
- };
-
- rng@c1108100 {
- compatible = "amlogic,aml8726-rng";
- reg = <0xc1108100 8>; /* cbus 0x2040 */
- };
-
- usb-phy@c1108400 {
- /* usb-a and usb-b phy */
- compatible = "amlogic,aml8726-m3-usb-phy";
- reg = <0xc1108400 32>; /* cbus 0x2100 */
- };
-
- usb@c9040000 {
- /* usb-a */
- compatible = "synopsys,designware-hs-otg2";
- reg = <0xc9040000 0x40000>; /* ahbbus 0x40000*/
- interrupts = <0 30 4>; /* AM_IRQ0(30) */
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usb@c90c0000 {
- /* usb-b */
- compatible = "synopsys,designware-hs-otg2";
- reg = <0xc90c0000 0x40000>; /* ahbbus 0xc0000 */
- interrupts = <0 31 4>; /* AM_IRQ0(31) */
- #address-cells = <1>;
- #size-cells = <0>;
-
- dr_mode = "host";
- };
-
- eth@c9410000 {
- /* ethernet */
- compatible = "snps,dwmac";
- reg = <0xc9410000 0x2000>; /* ahbbus 0x410000 */
- interrupts = <0 8 1>; /* AM_IRQ0(8) */
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- screen: fb@c8001324 {
- device_type = "display";
- compatible = "amlogic,aml8726-fb";
- reg = <0xc8001324 12>, /* CANVAS */
- <0xc1106800 1024>, /* VIU */
- <0xc1107400 1024>; /* VPP */
- interrupts = <0 2 1>, /* AM_IRQ0(2) */
- <0 3 1>, /* AM_IRQ0(3) */
- <0 12 1>, /* AM_IRQ0(12) */
- <0 13 1>; /* AM_IRQ0(13) */
-
- address = <0x84900000>; /* match memreserve */
- width = <720>;
- height = <480>;
- depth = <24>;
- linebytes = <2160>;
- };
- };
-
- chosen {
- stdin = "uart0";
- stdout = "uart0";
- };
-};
-
-&clk81 {
- clock-frequency = <0>;
-};
-
-&uart_AO {
- status = "okay";
- current-speed = <115200>;
-};

File Metadata

Mime Type
text/plain
Expires
Tue, Apr 21, 4:56 PM (10 h, 20 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
31921864
Default Alt Text
D28365.id82969.diff (88 KB)

Event Timeline