Page MenuHomeFreeBSD
Files F151315404

D12833.id34506.diff
No OneTemporary
Actions

D12833.id34506.diff
View Options

Index: head/sys/conf/files
===================================================================
--- head/sys/conf/files
+++ head/sys/conf/files
@@ -1789,6 +1789,7 @@
dev/iicbus/ds13rtc.c optional ds13rtc | ds133x | ds1374
dev/iicbus/ds1672.c optional ds1672
dev/iicbus/ds3231.c optional ds3231
+dev/iicbus/rtc8583.c optional rtc8583
dev/iicbus/icee.c optional icee
dev/iicbus/if_ic.c optional ic
dev/iicbus/iic.c optional iic
Index: head/sys/dev/iicbus/rtc8583.c
===================================================================
--- head/sys/dev/iicbus/rtc8583.c
+++ head/sys/dev/iicbus/rtc8583.c
@@ -0,0 +1,295 @@
+/*-
+ * Copyright (c) 2017 Hiroki Mori. All rights reserved.
+ * Copyright (c) 2017 Ian Lepore. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This code base on isl12xx.c
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+/*
+ * Driver for realtime clock EPSON RTC-8583
+ */
+
+#include "opt_platform.h"
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/clock.h>
+#include <sys/kernel.h>
+#include <sys/lock.h>
+#include <sys/module.h>
+
+#ifdef FDT
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+#endif
+
+#include <dev/iicbus/iiconf.h>
+#include <dev/iicbus/iicbus.h>
+
+#include "clock_if.h"
+#include "iicbus_if.h"
+
+#define RTC8583_SC_REG 0x01 /* RTC Seconds */
+#define RTC8583_USERSRAM_REG 0x10 /* User SRAM register (first) */
+#define MAX_TRANSFER 16
+
+/*
+ * A struct laid out in the same order as the time registers in the chip.
+ */
+struct time_regs {
+ uint8_t msec, sec, min, hour, day, month;
+};
+
+struct rtc8583_softc {
+ device_t dev;
+ device_t busdev;
+ struct intr_config_hook
+ init_hook;
+};
+
+#ifdef FDT
+static struct ofw_compat_data compat_data[] = {
+ {"epson,rtc8583", 1},
+ {NULL, 0},
+};
+#endif
+
+static void rtc8583_init(void *arg);
+static int rtc8583_probe(device_t dev);
+static int rtc8583_attach(device_t dev);
+static int rtc8583_detach(device_t dev);
+
+static int rtc8583_gettime(device_t dev, struct timespec *ts);
+static int rtc8583_settime(device_t dev, struct timespec *ts);
+
+static int rtc8583_writeto(device_t slavedev, uint8_t regaddr,
+ void *buffer, uint16_t buflen, int waithow);
+
+/* Implementation */
+
+static int
+rtc8583_writeto(device_t slavedev, uint8_t regaddr, void *buffer,
+ uint16_t buflen, int waithow)
+{
+ struct iic_msg msgs;
+ uint8_t slaveaddr;
+ uint8_t newbuf[MAX_TRANSFER];
+
+ slaveaddr = iicbus_get_addr(slavedev);
+
+ newbuf[0] = regaddr;
+ memcpy(newbuf + 1, buffer, buflen);
+ msgs.slave = slaveaddr;
+ msgs.flags = IIC_M_WR;
+ msgs.len = 1 + buflen;
+ msgs.buf = newbuf;
+
+ return (iicbus_transfer_excl(slavedev, &msgs, 1, waithow));
+}
+
+static inline int
+rtc8583_read1(struct rtc8583_softc *sc, uint8_t reg, uint8_t *data)
+{
+
+ return (iicdev_readfrom(sc->dev, reg, data, 1, IIC_WAIT));
+}
+
+static inline int
+rtc8583_write1(struct rtc8583_softc *sc, uint8_t reg, uint8_t val)
+{
+
+ return (rtc8583_writeto(sc->dev, reg, &val, 1, IIC_WAIT));
+}
+
+static void
+rtc8583_init(void *arg)
+{
+ struct rtc8583_softc *sc;
+
+ sc = (struct rtc8583_softc*)arg;
+ config_intrhook_disestablish(&sc->init_hook);
+
+ /*
+ * Register as a system realtime clock.
+ */
+ clock_register_flags(sc->dev, 1000000, CLOCKF_SETTIME_NO_ADJ);
+ clock_schedule(sc->dev, 1);
+ return;
+}
+
+static int
+rtc8583_probe(device_t dev)
+{
+
+#ifdef FDT
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ if (ofw_bus_search_compatible(dev, compat_data)->ocd_data != 0) {
+ device_set_desc(dev, "EPSON RTC-8583");
+ return (BUS_PROBE_DEFAULT);
+ }
+#endif
+ return (ENXIO);
+}
+
+static int
+rtc8583_attach(device_t dev)
+{
+ struct rtc8583_softc *sc;
+
+ sc = device_get_softc(dev);
+ sc->dev = dev;
+ sc->busdev = device_get_parent(sc->dev);
+
+ /*
+ * Chip init must wait until interrupts are enabled. Often i2c access
+ * works only when the interrupts are available.
+ */
+ sc->init_hook.ich_func = rtc8583_init;
+ sc->init_hook.ich_arg = sc;
+ if (config_intrhook_establish(&sc->init_hook) != 0)
+ return (ENOMEM);
+
+ return (0);
+}
+
+static int
+rtc8583_detach(device_t dev)
+{
+
+ clock_unregister(dev);
+ return (0);
+}
+
+static int
+rtc8583_gettime(device_t dev, struct timespec *ts)
+{
+ struct rtc8583_softc *sc;
+ struct clocktime ct;
+ struct time_regs tregs;
+ uint8_t y, ytmp, sreg;
+ int err;
+
+ sc = device_get_softc(dev);
+
+ /* Read the bcd time registers. */
+ if ((err = iicdev_readfrom(sc->dev, RTC8583_SC_REG, &tregs, sizeof(tregs),
+ IIC_WAIT)) != 0)
+ return (err);
+
+ y = tregs.day >> 6;
+ /* Get year from user SRAM */
+ rtc8583_read1(sc, RTC8583_USERSRAM_REG, &sreg);
+
+ /*
+ * Check if year adjustment is required.
+ * RTC has only 2 bits for year value (i.e. maximum is 4 years), so
+ * full year value is stored in user SRAM and updated manually or
+ * by this code.
+ */
+ ytmp = sreg & 0x03;
+ if (ytmp != y) {
+ /* shift according to difference */
+ sreg += y - ytmp;
+
+ /* check if overflow happened */
+ if (ytmp > y)
+ sreg += 4;
+
+ if ((err = iicbus_request_bus(sc->busdev, sc->dev, IIC_WAIT)) != 0)
+ return (err);
+ rtc8583_write1(sc, RTC8583_USERSRAM_REG, sreg);
+ iicbus_release_bus(sc->busdev, sc->dev);
+ }
+
+ ct.nsec = FROMBCD(tregs.msec) * 10 * 1000 * 1000;
+ ct.sec = FROMBCD(tregs.sec);
+ ct.min = FROMBCD(tregs.min);
+ ct.hour = FROMBCD(tregs.hour & 0x3f);
+ ct.day = FROMBCD(tregs.day & 0x3f);
+ ct.mon = FROMBCD(tregs.month & 0x1f);
+ ct.year = 2000 + sreg;
+
+ return (clock_ct_to_ts(&ct, ts));
+}
+
+static int
+rtc8583_settime(device_t dev, struct timespec *ts)
+{
+ struct rtc8583_softc *sc;
+ struct clocktime ct;
+ struct time_regs tregs;
+ uint8_t sreg;
+ int err;
+
+ sc = device_get_softc(dev);
+ ts->tv_sec -= utc_offset();
+ ts->tv_nsec = 0;
+ clock_ts_to_ct(ts, &ct);
+
+ tregs.sec = TOBCD(ct.sec);
+ tregs.min = TOBCD(ct.min);
+ tregs.hour = TOBCD(ct.hour);
+ tregs.day = TOBCD(ct.day) | ((ct.year & 0x03) << 6);
+ tregs.month = TOBCD(ct.mon);
+
+ if ((err = iicbus_request_bus(sc->busdev, sc->dev, IIC_WAIT)) != 0)
+ return (err);
+ err = rtc8583_writeto(sc->dev, RTC8583_SC_REG, &tregs,
+ sizeof(tregs), IIC_WAIT);
+ sreg = ct.year - 2000;
+ /* save to year to sram */
+ rtc8583_write1(sc, RTC8583_USERSRAM_REG, sreg);
+ iicbus_release_bus(sc->busdev, sc->dev);
+
+ return (err);
+}
+
+static device_method_t rtc8583_methods[] = {
+ /* device_if methods */
+ DEVMETHOD(device_probe, rtc8583_probe),
+ DEVMETHOD(device_attach, rtc8583_attach),
+ DEVMETHOD(device_detach, rtc8583_detach),
+
+ /* clock_if methods */
+ DEVMETHOD(clock_gettime, rtc8583_gettime),
+ DEVMETHOD(clock_settime, rtc8583_settime),
+
+ DEVMETHOD_END,
+};
+
+static driver_t rtc8583_driver = {
+ "rtc8583",
+ rtc8583_methods,
+ sizeof(struct rtc8583_softc),
+};
+static devclass_t rtc8583_devclass;
+
+DRIVER_MODULE(rtc8583, iicbus, rtc8583_driver, rtc8583_devclass, NULL, NULL);
+MODULE_VERSION(rtc8583, 1);
+MODULE_DEPEND(rtc8583, iicbus, IICBUS_MINVER, IICBUS_PREFVER, IICBUS_MAXVER);

File Metadata

Mime Type
text/plain
Expires
Wed, Apr 8, 1:18 PM (7 h, 41 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
31100225
Default Alt Text
D12833.id34506.diff (8 KB)

Event Timeline