D6394.id16451.largetrue.diff
No OneTemporary
Actions

Size

442 KB

Referenced Files

None

Subscribers

None

D6394.id16451.largetrue.diff
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.

	Index: head/sys/boot/fdt/dts/mips/fbsd-mt7620a.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-mt7620a.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-mt7620a.dtsi
	@@ -1,35 +1,9 @@
	/* $FreeBSD$ */

	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@10000000/uartlite@c00";
	- };
	-
	+&pcie {
	/*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	+ * Our driver is different that OpenWRT's, so we need slightly
	+ * different values for the reg property
	*/
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	-
	- /* Specify the clocks node for the usbphy */
	- usbphy: usbphy {
	- clocks = <&clkctrl 22 &clkctrl 25>;
	- };
	-
	- pcie@10140000 {
	- /*
	- * Our driver is different that OpenWRT's, so we need slightly
	- * different values for the reg property
	- */
	- reg = <0x10140000 0x10000>;
	-
	- /*
	- * Also, we need resets and clocks defined, so we can properly
	- * initialize the PCIe
	- */
	- clocks = <&clkctrl 26>;
	- };
	+ reg = <0x10140000 0x10000>;
	};
	Index: head/sys/boot/fdt/dts/mips/fbsd-mt7620n.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-mt7620n.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-mt7620n.dtsi
	@@ -1,21 +0,0 @@
	-/* $FreeBSD$ */
	-
	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@10000000/uartlite@c00";
	- };
	-
	- /*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	- */
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	-
	- /* Specify the clocks node for the usbphy */
	- usbphy: usbphy {
	- clocks = <&clkctrl 22 &clkctrl 25>;
	- };
	-};
	Index: head/sys/boot/fdt/dts/mips/fbsd-mt7621.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-mt7621.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-mt7621.dtsi
	@@ -1,73 +1,49 @@
	/* $FreeBSD$ */

	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@1E000000/uartlite@c00";
	- };
	-
	- /*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	- */
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	-
	- palmbus@1E000000 {
	- uartlite@c00 { clock-frequency = <50000000>; };
	+&palmbus {
	+ gpio@600 {
	+ /*
	+ * Mark gpio as compatible to simple-bus and override
	+ * its #size-cells and provide a default ranges property
	+ * so we can attach instances of our mtk_gpio_v2 driver
	+ * to it for now. Provide exactly the same resources to
	+ * the instances of mtk_gpio_v2.
	+ */
	+ compatible = "simple-bus";
	+ ranges = <0x0 0x600 0x100>;
	+ #size-cells = <1>;
	+
	+ interrupt-parent = <&gic>;
	+
	+ gpio0: bank@0 {
	+ reg = <0x0 0x100>;
	+ interrupts = <0 6 4>;
	+ };

	- gpio@600 {
	- /*
	- * Mark gpio as compatible to simple-bus and override
	- * its #size-cells and provide a default ranges property
	- * so we can attach instances of our mtk_gpio_v2 driver
	- * to it for now. Provide exactly the same resources to
	- * the instances of mtk_gpio_v2.
	- */
	- compatible = "simple-bus";
	- ranges = <0x0 0x600 0x100>;
	- #size-cells = <1>;
	-
	- interrupt-parent = <&gic>;
	-
	- gpio0: bank@0 {
	- reg = <0x0 0x100>;
	- interrupts = <0 6 4>;
	- };
	-
	- gpio1: bank@1 {
	- reg = <0x0 0x100>;
	- interrupts = <0 6 4>;
	- };
	-
	- gpio2: bank@2 {
	- reg = <0x0 0x100>;
	- interrupts = <0 6 4>;
	- };
	+ gpio1: bank@1 {
	+ reg = <0x0 0x100>;
	+ interrupts = <0 6 4>;
	};
	- };

	- xhci@1E1C0000 {
	- /*
	- * A slightly different value for reg size is needed by our
	- * driver for the moment
	- */
	- reg = <0x1e1c0000 0x20000>;
	+ gpio2: bank@2 {
	+ reg = <0x0 0x100>;
	+ interrupts = <0 6 4>;
	+ };
	};
	+};

	- pcie@1e140000 {
	- /*
	- * Our driver is different that OpenWRT's, so we need slightly
	- * different values for the reg property
	- */
	- reg = <0x1e140000 0x10000>;
	+&xhci {
	+ /*
	+ * A slightly different value for reg size is needed by our
	+ * driver for the moment
	+ */
	+ reg = <0x1e1c0000 0x20000>;
	+};

	- /*
	- * Also, we need resets and clocks defined, so we can properly
	- * initialize the PCIe
	- */
	- resets = <&rstctrl 24>, <&rstctrl 25>, <&rstctrl 26>;
	- clocks = <&clkctrl 24>, <&clkctrl 25>, <&clkctrl 26>;
	- };
	+&pcie {
	+ /*
	+ * Our driver is different that OpenWRT's, so we need slightly
	+ * different values for the reg property
	+ */
	+ reg = <0x1e140000 0x10000>;
	};
	Index: head/sys/boot/fdt/dts/mips/fbsd-mt7628an.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-mt7628an.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-mt7628an.dtsi
	@@ -1,70 +1,39 @@
	/* $FreeBSD$ */

	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@10000000/uart2@e00";
	- };
	-
	- /*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	- */
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	-
	- palmbus@10000000 {
	- uartlite@c00 { clock-frequency = <40000000>; };
	- uart1@d00 { clock-frequency = <40000000>; };
	- uart2@e00 { clock-frequency = <40000000>; };
	-
	- gpio@600 {
	- /*
	- * Mark gpio as compatible to simple-bus and override
	- * its #size-cells and provide a default ranges property
	- * so we can attach instances of our mtk_gpio_v2 driver
	- * to it for now. Provide exactly the same resources to
	- * the instances of mtk_gpio_v2.
	- */
	- compatible = "simple-bus";
	- ranges = <0x0 0x600 0x100>;
	- #size-cells = <1>;
	-
	- gpio0: bank@0 {
	- reg = <0x0 0x100>;
	- interrupts = <6>;
	- };
	-
	- gpio1: bank@1 {
	- reg = <0x0 0x100>;
	- interrupts = <6>;
	- };
	+&palmbus {
	+ gpio@600 {
	+ /*
	+ * Mark gpio as compatible to simple-bus and override
	+ * its #size-cells and provide a default ranges property
	+ * so we can attach instances of our mtk_gpio_v2 driver
	+ * to it for now. Provide exactly the same resources to
	+ * the instances of mtk_gpio_v2.
	+ */
	+ compatible = "simple-bus";
	+ ranges = <0x0 0x600 0x100>;
	+ #size-cells = <1>;
	+
	+ gpio0: bank@0 {
	+ reg = <0x0 0x100>;
	+ interrupts = <6>;
	+ };

	- gpio2: bank@2 {
	- reg = <0x0 0x100>;
	- interrupts = <6>;
	- };
	+ gpio1: bank@1 {
	+ reg = <0x0 0x100>;
	+ interrupts = <6>;
	};
	- };

	- /* Specify the clocks node for the usbphy */
	- usbphy: usbphy@10120000 {
	- clocks = <&clkctrl 22 &clkctrl 25>;
	+ gpio2: bank@2 {
	+ reg = <0x0 0x100>;
	+ interrupts = <6>;
	+ };
	};
	+};

	- pcie@10140000 {
	+&pcie {
	/*
	* Our driver is different that OpenWRT's, so we need slightly
	* different values for the reg property
	*/
	reg = <0x10140000 0x10000>;
	-
	- /*
	- * Also, we need resets and clocks defined, so we can properly
	- * initialize the PCIe
	- */
	- resets = <&rstctrl 26>, <&rstctrl 27>;
	- clocks = <&clkctrl 26>, <&clkctrl 27>;
	- };
	};
	Index: head/sys/boot/fdt/dts/mips/fbsd-rt2880.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-rt2880.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-rt2880.dtsi
	@@ -1,16 +0,0 @@
	-/* $FreeBSD$ */
	-
	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@300000/uartlite@c00";
	- };
	-
	- /*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	- */
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	-};
	Index: head/sys/boot/fdt/dts/mips/fbsd-rt3050.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-rt3050.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-rt3050.dtsi
	@@ -1,23 +0,0 @@
	-/* $FreeBSD$ */
	-
	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@10000000/uartlite@c00";
	- };
	-
	- /*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	- */
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	-
	- /* Specify the USB PHY */
	- usbphy: usbphy {
	- compatible = "ralink,rt3050-usbphy";
	- resets = <&rstctrl 22>;
	- clocks = <&clkctrl 18>;
	- };
	-};
	Index: head/sys/boot/fdt/dts/mips/fbsd-rt3352.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-rt3352.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-rt3352.dtsi
	@@ -1,21 +0,0 @@
	-/* $FreeBSD$ */
	-
	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@10000000/uartlite@c00";
	- };
	-
	- /*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	- */
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	-
	- /* Specify the clocks node for the usbphy */
	- usbphy {
	- clocks = <&clkctrl 18 &clkctrl 20>;
	- };
	-};
	Index: head/sys/boot/fdt/dts/mips/fbsd-rt3883.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-rt3883.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-rt3883.dtsi
	@@ -1,37 +1,16 @@
	/* $FreeBSD$ */

	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@10000000/uartlite@c00";
	- };
	+&pci {
	+ #address-cells = <3>;
	+ #size-cells = <2>;
	+ ranges = <
	+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000
	+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000
	+ >;

	- /*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	- */
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	+ interrupt-parent = <&cpuintc>;
	+ interrupts = <4>;

	- /* Specify the clocks node for the usbphy */
	- usbphy: usbphy {
	- clocks = <&clkctrl 22 &clkctrl 25>;
	- clock-names = "host", "device";
	- };
	-
	- pci@10140000 {
	- #address-cells = <3>;
	- #size-cells = <2>;
	- ranges = <
	- 0x02000000 0 0x00000000 0x20000000 0 0x10000000
	- 0x01000000 0 0x00000000 0x10160000 0 0x00010000
	- >;
	-
	- interrupt-parent = <&cpuintc>;
	- interrupts = <4>;
	-
	- resets = <&rstctrl 23>;
	- clocks = <&clkctrl 21>;
	- };
	+ resets = <&rstctrl 23>;
	+ clocks = <&clkctrl 21>;
	};
	Index: head/sys/boot/fdt/dts/mips/fbsd-rt5350.dtsi
	===================================================================
	--- head/sys/boot/fdt/dts/mips/fbsd-rt5350.dtsi
	+++ head/sys/boot/fdt/dts/mips/fbsd-rt5350.dtsi
	@@ -1,21 +0,0 @@
	-/* $FreeBSD$ */
	-
	-/ {
	- /* Specify alias for serial0 so we have a working console */
	- aliases {
	- serial0 = "/palmbus@10000000/uartlite@c00";
	- };
	-
	- /*
	- * OpenWRT doesn't define a clock controller, but we currently need one
	- */
	- clkctrl: cltctrl {
	- compatible = "ralink,rt2880-clock";
	- #clock-cells = <1>;
	- };
	-
	- /* Specify the clocks node for the USB PHY */
	- usbphy {
	- clocks = <&clkctrl 18>;
	- };
	-};
	Index: head/sys/gnu/dts/mips/3G-6200N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/3G-6200N.dts
	+++ head/sys/gnu/dts/mips/3G-6200N.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "3G-6200N", "ralink,rt3050-soc";
	model = "Edimax 3g-6200n";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -53,18 +44,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -102,8 +81,29 @@
	linux,code = <0x100>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/3G-6200NL.dts
	===================================================================
	--- head/sys/gnu/dts/mips/3G-6200NL.dts
	+++ head/sys/gnu/dts/mips/3G-6200NL.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "3G-6200NL", "ralink,rt3050-soc";
	model = "Edimax 3g-6200nl";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -53,18 +44,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -86,8 +65,29 @@
	linux,code = <0x211>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/3G150B.dts
	===================================================================
	--- head/sys/gnu/dts/mips/3G150B.dts
	+++ head/sys/gnu/dts/mips/3G150B.dts
	@@ -1,83 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "3G150B", "ralink,rt5350-soc";
	model = "Tenda 3G150B";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	-
	- gpio1: gpio@660 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -116,3 +44,73 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/3G300M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/3G300M.dts
	+++ head/sys/gnu/dts/mips/3G300M.dts
	@@ -1,58 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "3G300M", "ralink,rt3052-soc";
	model = "Tenda 3G300M";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -105,20 +58,65 @@
	linux,code = <0x100>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	+&spi0 {
	+ status = "okay";

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/A5-V11.dts
	===================================================================
	--- head/sys/gnu/dts/mips/A5-V11.dts
	+++ head/sys/gnu/dts/mips/A5-V11.dts
	@@ -1,82 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "A5-V11", "ralink,rt5350-soc";
	model = "A5-V11";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "pm25lq032";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	-
	- gpio1: gpio@660 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf", "led";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -121,3 +50,73 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "pm25lq032";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf", "led";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x1>;
	+ mediatek,portdisable = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/AI-BR100.dts
	===================================================================
	--- head/sys/gnu/dts/mips/AI-BR100.dts
	+++ head/sys/gnu/dts/mips/AI-BR100.dts
	@@ -1,85 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "AI-BR100", "ralink,mt7620a-soc";
	model = "Aigale Ai-BR100";

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x20000>;
	- read-only;
	- };
	-
	- partition@20000 {
	- label = "u-boot-env";
	- reg = <0x20000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@30000 {
	- label = "factory";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "firmware";
	- reg = <0x40000 0x7c0000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -107,3 +33,75 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "u-boot-env";
	+ reg = <0x20000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@30000 {
	+ label = "factory";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0x7c0000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/AIR3GII.dts
	===================================================================
	--- head/sys/gnu/dts/mips/AIR3GII.dts
	+++ head/sys/gnu/dts/mips/AIR3GII.dts
	@@ -1,74 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "AIR3GII", "ralink,rt5350-soc";
	model = "AirLive Air3GII";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q32b";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -96,3 +33,64 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q32b";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/ALL0239-3G.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ALL0239-3G.dts
	+++ head/sys/gnu/dts/mips/ALL0239-3G.dts
	@@ -1,19 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "ALL0239-3G", "ralink,rt3052-soc";
	model = "Allnet ALL0239-3G";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };

	cfi@1f000000 {
	compatible = "cfi-flash";
	@@ -47,19 +39,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- status = "okay";
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -108,8 +87,30 @@
	linux,code = <0x211>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ status = "okay";
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/ALL0256N-4M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ALL0256N-4M.dts
	+++ head/sys/gnu/dts/mips/ALL0256N-4M.dts
	@@ -1,74 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "ALL0256N", "ralink,rt3050-soc";
	model = "Allnet ALL0256N";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3c8000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -101,3 +38,64 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3c8000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/ALL0256N-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ALL0256N-8M.dts
	+++ head/sys/gnu/dts/mips/ALL0256N-8M.dts
	@@ -1,74 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "ALL0256N", "ralink,rt3050-soc";
	model = "Allnet ALL0256N";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -101,3 +38,64 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/ALL5002.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ALL5002.dts
	+++ head/sys/gnu/dts/mips/ALL5002.dts
	@@ -1,82 +1,11 @@
	/dts-v1/;

	-/include/ "rt3352.dtsi"
	+#include "rt3352.dtsi"

	/ {
	compatible = "ALL5002", "ralink,rt3352-soc";
	model = "Allnet ALL5002";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	i2c-gpio {
	compatible = "i2c-gpio";
	gpios = <&gpio0 1 0 &gpio0 2 0>;
	@@ -109,3 +38,72 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l25635e";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x1fb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/ALL5003.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ALL5003.dts
	+++ head/sys/gnu/dts/mips/ALL5003.dts
	@@ -1,82 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "ALL5003", "ralink,rt5350-soc";
	model = "Allnet ALL5003";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	i2c-gpio {
	compatible = "i2c-gpio";
	gpios = <&gpio0 1 0 &gpio0 2 0>;
	@@ -109,3 +38,72 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l25635e";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x1fb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/AR670W.dts
	===================================================================
	--- head/sys/gnu/dts/mips/AR670W.dts
	+++ head/sys/gnu/dts/mips/AR670W.dts
	@@ -1,50 +1,11 @@
	/dts-v1/;

	-/include/ "rt2880.dtsi"
	+#include "rt2880.dtsi"

	/ {
	compatible = "AR670W", "ralink,rt2880-soc";
	model = "Airlink101 AR670W";

	- palmbus@300000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "uartlite";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@400000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x2004>;
	-
	- port@0 {
	- phy-handle = <&phy0>;
	- phy-mode = "mii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@0 {
	- phy-mode = "mii";
	- reg = <0>;
	- };
	- };
	- };
	-
	- wmac@480000 {
	- status = "okay";
	- ralink,mtd-eeprom = <&factory 0x2000>;
	- };
	-
	cfi@bdc00000 {
	compatible = "cfi-flash";
	reg = <0xbc400000 0x800000>;
	@@ -103,3 +64,40 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi", "uartlite";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x2004>;
	+
	+ port@0 {
	+ phy-handle = <&phy0>;
	+ phy-mode = "mii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ phy-mode = "mii";
	+ reg = <0>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x2000>;
	+};
	Index: head/sys/gnu/dts/mips/AR725W.dts
	===================================================================
	--- head/sys/gnu/dts/mips/AR725W.dts
	+++ head/sys/gnu/dts/mips/AR725W.dts
	@@ -1,50 +1,11 @@
	/dts-v1/;

	-/include/ "rt2880.dtsi"
	+#include "rt2880.dtsi"

	/ {
	compatible = "AR725W", "ralink,rt2880-soc";
	model = "Airlink101 AR725W";

	- palmbus@300000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "uartlite";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@400000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x4>;
	-
	- port@0 {
	- phy-handle = <&phy0>;
	- phy-mode = "mii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@0 {
	- phy-mode = "mii";
	- reg = <0>;
	- };
	- };
	- };
	-
	- wmac@480000 {
	- status = "okay";
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	cfi@bdc00000 {
	compatible = "cfi-flash";
	reg = <0xbc400000 0x800000>;
	@@ -113,3 +74,40 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi", "uartlite";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x4>;
	+
	+ port@0 {
	+ phy-handle = <&phy0>;
	+ phy-mode = "mii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ phy-mode = "mii";
	+ reg = <0>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/ASL26555-16M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ASL26555-16M.dts
	+++ head/sys/gnu/dts/mips/ASL26555-16M.dts
	@@ -1,96 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "ASL26555", "ralink,rt3050-soc";
	model = "Alpha ASL26555";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25sl12801";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "uboot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "uboot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf80000>;
	- };
	-
	- partition@fd0000 {
	- label = "cert";
	- reg = <0xfd0000 0x10000>;
	- read-only;
	- };
	-
	- partition@fe0000 {
	- label = "langpack";
	- reg = <0xfe0000 0x10000>;
	- read-only;
	- };
	-
	- devdata: partition@ff0000 {
	- label = "devdata";
	- reg = <0xff0000 0x10000>;
	- read-only;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&devdata 0x4004>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x1e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	- };
	-
	- otg@101c0000 {
	- status = "okay";
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -154,3 +69,86 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25sl12801";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "uboot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "uboot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf80000>;
	+ };
	+
	+ partition@fd0000 {
	+ label = "cert";
	+ reg = <0xfd0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@fe0000 {
	+ label = "langpack";
	+ reg = <0xfe0000 0x10000>;
	+ read-only;
	+ };
	+
	+ devdata: partition@ff0000 {
	+ label = "devdata";
	+ reg = <0xff0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&devdata 0x4004>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x1e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devdata 0x4000>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/ASL26555-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ASL26555-8M.dts
	+++ head/sys/gnu/dts/mips/ASL26555-8M.dts
	@@ -1,90 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "ASL26555", "ralink,rt3050-soc";
	model = "Alpha ASL26555";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25sl064p";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "uboot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- ubootenv: partition@30000 {
	- label = "uboot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "rgdb";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x790000>;
	- };
	-
	- partition@7e0000 {
	- label = "cert";
	- reg = <0x7e0000 0x10000>;
	- read-only;
	- };
	-
	- partition@7f0000 {
	- label = "langpack";
	- reg = <0x7f0000 0x10000>;
	- read-only;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&ubootenv 0x4004>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x1e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&ubootenv 0x4000>;
	- };
	-
	- otg@101c0000 {
	- status = "okay";
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -148,3 +69,80 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25sl064p";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "uboot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ ubootenv: partition@30000 {
	+ label = "uboot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "rgdb";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x790000>;
	+ };
	+
	+ partition@7e0000 {
	+ label = "cert";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7f0000 {
	+ label = "langpack";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&ubootenv 0x4004>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x1e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&ubootenv 0x4000>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/ATP-52B.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ATP-52B.dts
	+++ head/sys/gnu/dts/mips/ATP-52B.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "ATP-52B", "ralink,rt3052-soc";
	model = "Argus ATP-52B";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -77,20 +68,30 @@
	linux,code = <0x198>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/AWAPN2403.dts
	===================================================================
	--- head/sys/gnu/dts/mips/AWAPN2403.dts
	+++ head/sys/gnu/dts/mips/AWAPN2403.dts
	@@ -1,66 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "AWAPN2403", "ralink,rt3052-soc";
	model = "AsiaRF AWAPN2403";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -83,3 +28,56 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/AWM002-4M.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/AWM002-4M.dtsi
	+++ head/sys/gnu/dts/mips/AWM002-4M.dtsi
	@@ -1,15 +1,11 @@
	-/include/ "AWM002.dtsi"
	+#include "AWM002.dtsi"

	/ {
	compatible = "AWM002", "ralink,rt5350-soc";
	model = "AsiaRF AWM002";
	+};

	- palmbus@10000000 {
	- spi@b00 {
	- m25p80@0 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l3205d";
	- };
	- };
	- };
	+&m25p80 {
	+ compatible = "jedec,spi-nor";
	+ linux,modalias = "m25p80", "mx25l3205d";
	};
	Index: head/sys/gnu/dts/mips/AWM002-8M.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/AWM002-8M.dtsi
	+++ head/sys/gnu/dts/mips/AWM002-8M.dtsi
	@@ -1,15 +1,11 @@
	-/include/ "AWM002.dtsi"
	+#include "AWM002.dtsi"

	/ {
	compatible = "AWM002", "ralink,rt5350-soc";
	model = "AsiaRF AWM002";
	+};

	- palmbus@10000000 {
	- spi@b00 {
	- m25p80@0 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l6405d";
	- };
	- };
	- };
	+&m25p80 {
	+ compatible = "jedec,spi-nor";
	+ linux,modalias = "m25p80", "mx25l6405d";
	};
	Index: head/sys/gnu/dts/mips/AWM002-EVB-4M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/AWM002-EVB-4M.dts
	+++ head/sys/gnu/dts/mips/AWM002-EVB-4M.dts
	@@ -1,18 +1,10 @@
	/dts-v1/;

	-/include/ "AWM002-4M.dtsi"
	+#include "AWM002-4M.dtsi"

	/ {
	model = "AsiaRF AWM002 EVB";

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -51,3 +43,11 @@
	};
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/AWM002-EVB-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/AWM002-EVB-8M.dts
	+++ head/sys/gnu/dts/mips/AWM002-EVB-8M.dts
	@@ -1,18 +1,10 @@
	/dts-v1/;

	-/include/ "AWM002-8M.dtsi"
	+#include "AWM002-8M.dtsi"

	/ {
	model = "AsiaRF AWM002 EVB";

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -51,3 +43,11 @@
	};
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/AWM002.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/AWM002.dtsi
	+++ head/sys/gnu/dts/mips/AWM002.dtsi
	@@ -1,67 +1,9 @@
	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "AWM002", "ralink,rt5350-soc";
	model = "AsiaRF AWM002";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- reg = <0 0>;
	- compatible = "jedec,spi-nor";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -76,3 +18,59 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80: m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ reg = <0 0>;
	+ compatible = "jedec,spi-nor";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x1fb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default {
	+ gpio {
	+ ralink,group = "i2c", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/AWM003-EVB.dts
	===================================================================
	--- head/sys/gnu/dts/mips/AWM003-EVB.dts
	+++ head/sys/gnu/dts/mips/AWM003-EVB.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "AWM002-8M.dtsi"
	+#include "AWM002-8M.dtsi"

	/ {
	compatible = "AWM003", "ralink,rt5350-soc";
	@@ -11,23 +11,6 @@
	reg = <0x0 0x4000000>;
	};

	- palmbus@10000000 {
	- spi@b00 {
	- m25p80@0 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l6405d";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -66,3 +49,16 @@
	};
	};
	};
	+
	+&m25p80 {
	+ compatible = "jedec,spi-nor";
	+ linux,modalias = "m25p80", "mx25l6405d";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/ArcherC20i.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ArcherC20i.dts
	+++ head/sys/gnu/dts/mips/ArcherC20i.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-soc";
	@@ -10,109 +10,107 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x20000>;
	- read-only;
	- };
	-
	- partition@20000 {
	- label = "firmware";
	- reg = <0x20000 0x7a0000>;
	- };
	-
	- partition@7c0000 {
	- label = "config";
	- reg = <0x7c0000 0x10000>;
	- };
	-
	- rom: partition@7d0000 {
	- label = "rom";
	- reg = <0x7d0000 0x10000>;
	- };
	-
	- partition@7e0000 {
	- label = "romfile";
	- reg = <0x7e0000 0x10000>;
	- };
	-
	- radio: partition@7f0000 {
	- label = "radio";
	- reg = <0x7f0000 0x10000>;
	- };
	- };
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ };
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7a0000>;
	+ };
	+
	+ partition@7c0000 {
	+ label = "config";
	+ reg = <0x7c0000 0x10000>;
	+ };
	+
	+ rom: partition@7d0000 {
	+ label = "rom";
	+ reg = <0x7d0000 0x10000>;
	+ };
	+
	+ partition@7e0000 {
	+ label = "romfile";
	+ reg = <0x7e0000 0x10000>;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	};
	};
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,function = "gpio";
	};
	};
	+};

	- ethernet@10100000 {
	+&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&rom 0xf100>;
	mediatek,portmap = "wllll";
	};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&ehci {
	+ status = "okay";
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&ohci {
	+ status = "okay";
	+};

	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- };
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&radio 0>;
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&radio 0>;
	+};

	- pcie@10140000 {
	- status = "okay";
	+&pcie {
	+ status = "okay";

	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&radio 32768>;
	- mediatek,2ghz = <0>;
	- };
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 32768>;
	+ mediatek,2ghz = <0>;
	};
	};
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	- };
	};
	Index: head/sys/gnu/dts/mips/BC2.dts
	===================================================================
	--- head/sys/gnu/dts/mips/BC2.dts
	+++ head/sys/gnu/dts/mips/BC2.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "BC2", "ralink,rt3052-soc";
	model = "NexAira BC2";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -68,20 +59,29 @@
	linux,code = <0x198>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/BR-6425.dts
	===================================================================
	--- head/sys/gnu/dts/mips/BR-6425.dts
	+++ head/sys/gnu/dts/mips/BR-6425.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "BR-6425", "ralink,rt3052-soc";
	model = "Edimax BR-6425";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -24,18 +15,6 @@
	#size-cells = <1>;
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -69,3 +48,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+/* mtd-mac-address = <&factory 0x4>; */
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+/* ralink,mtd-eeprom = <&factory 0>; */
	+};
	Index: head/sys/gnu/dts/mips/BR-6475ND.dts
	===================================================================
	--- head/sys/gnu/dts/mips/BR-6475ND.dts
	+++ head/sys/gnu/dts/mips/BR-6475ND.dts
	@@ -1,82 +1,50 @@
	/dts-v1/;

	-/include/ "rt3883.dtsi"
	+#include "rt3883.dtsi"

	/ {
	compatible = "BR-6475ND", "ralink,rt3883-soc";
	model = "Edimax BR-6475nD";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- palmbus@10000000 {
	- timer@100 {
	- status = "okay";
	- };
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <100>;

	- gpio1: gpio@638 {
	- status = "okay";
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 7 1>;
	+ linux,code = <0x198>;
	};

	- uartlite@c00 {
	- status = "okay";
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 9 1>;
	+ linux,input-type = <5>;
	+ linux,code = <0xf7>;
	};
	};

	- ethernet@10100000 {
	- status = "okay";
	- mtd-mac-address = <&devdata 0x0d>;
	+ gpio-leds {
	+ compatible = "gpio-leds";

	- port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	+ power {
	+ label = "br-6475nd:green:power";
	+ gpios = <&gpio0 10 1>;
	};
	- };

	- wmac@10180000 {
	- status = "okay";
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pci@10140000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&pci_pins>;
	-
	- pci_pins: pci {
	- pci {
	- ralink,group = "pci";
	- ralink,function = "pci-fnc";
	- };
	+ wlan {
	+ label = "br-6475nd:amber:wlan";
	+ gpios = <&gpio0 11 1>;
	};

	- host-bridge {
	- pci-bridge@1 {
	- status = "okay";
	-
	- wmac@0,0 {
	- ralink,5ghz = <0>;
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	- };
	- };
	+ wlan_5ghz {
	+ label = "br-6475nd:amber:wlan_5ghz";
	+ gpios = <&gpio0 14 1>;
	};
	};

	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	nor-flash@1c000000 {
	compatible = "cfi-flash";
	reg = <0x1c000000 0x800000>;
	@@ -126,58 +94,88 @@
	realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
	};

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	+ /* Unclear if this is the correct gpio setup; the USB ports are
	+ unpopulated on a stock BR-6475nD, even though the hardware exists
	+ and the headers are there. */
	+ /*
	+ gpio_export {
	+ compatible = "gpio-export";
	#size-cells = <0>;
	- poll-interval = <100>;

	- reset {
	- label = "reset";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x198>;
	+ usb {
	+ gpio-export,name="usb";
	+ gpio-export,output=<0>;
	+ gpios = <&gpio0 19 0>;
	};
	+ };
	+ */
	+};

	- rfkill {
	- label = "rfkill";
	- gpios = <&gpio0 9 1>;
	- linux,input-type = <5>;
	- linux,code = <0xf7>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "jtag", "uartf";
	+ ralink,function = "gpio";
	};
	};
	+};

	- gpio-leds {
	- compatible = "gpio-leds";
	+&timer {
	+ status = "okay";
	+};

	- power {
	- label = "br-6475nd:green:power";
	- gpios = <&gpio0 10 1>;
	- };
	+&gpio1 {
	+ status = "okay";
	+};

	- wlan {
	- label = "br-6475nd:amber:wlan";
	- gpios = <&gpio0 11 1>;
	- };
	+&uartlite {
	+ status = "okay";
	+};

	- wlan_5ghz {
	- label = "br-6475nd:amber:wlan_5ghz";
	- gpios = <&gpio0 14 1>;
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&devdata 0x0d>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pci_pins>;
	+
	+ pci_pins: pci {
	+ pci {
	+ ralink,group = "pci";
	+ ralink,function = "pci-fnc";
	};
	};

	- /* Unclear if this is the correct gpio setup; the USB ports are
	- unpopulated on a stock BR-6475nD, even though the hardware exists
	- and the headers are there. */
	- /*
	- gpio_export {
	- compatible = "gpio-export";
	- #size-cells = <0>;
	+ host-bridge {
	+ pci-bridge@1 {
	+ status = "okay";

	- usb {
	- gpio-export,name="usb";
	- gpio-export,output=<0>;
	- gpios = <&gpio0 19 0>;
	+ wmac@0,0 {
	+ ralink,5ghz = <0>;
	+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	+ reg = < 0x10000 0 0 0 0 >;
	+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ };
	};
	};
	- */
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/BROADWAY.dts
	===================================================================
	--- head/sys/gnu/dts/mips/BROADWAY.dts
	+++ head/sys/gnu/dts/mips/BROADWAY.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "BROADWAY", "ralink,rt3052-soc";
	model = "Hauppauge Broadway";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -85,8 +64,29 @@
	linux,code = <0x198>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/CARAMBOLA.dts
	===================================================================
	--- head/sys/gnu/dts/mips/CARAMBOLA.dts
	+++ head/sys/gnu/dts/mips/CARAMBOLA.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "CARAMBOLA", "ralink,rt3050-soc";
	@@ -10,15 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -51,25 +42,34 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	+ i2c-gpio {
	+ compatible = "i2c-gpio";
	+ gpios = <&gpio0 1 0 &gpio0 2 0>;
	+ i2c-gpio,delay-us = <10>;
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};

	- i2c-gpio {
	- compatible = "i2c-gpio";
	- gpios = <&gpio0 1 0 &gpio0 2 0>;
	- i2c-gpio,delay-us = <10>;
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/CF-WR800N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/CF-WR800N.dts
	+++ head/sys/gnu/dts/mips/CF-WR800N.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "cf-wr800n", "ralink,mt7620n-soc";
	@@ -10,77 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "spi refclk", "i2c";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -113,3 +42,72 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "ephy", "wled", "spi refclk", "i2c";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/CS-QR10.dts
	===================================================================
	--- head/sys/gnu/dts/mips/CS-QR10.dts
	+++ head/sys/gnu/dts/mips/CS-QR10.dts
	@@ -0,0 +1,161 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+/ {
	+ compatible = "ralink,mt7620a-soc";
	+ model = "Planex CS-QR10";
	+
	+ sound {
	+ compatible = "mediatek,mt7620-audio-wm8960";
	+ model = "mt7620-wm8960";
	+ i2s-controller = <&i2s>;
	+ audio-routing =
	+ "Ext Spk", "SPK_LP",
	+ "Ext Spk", "SPK_LN",
	+ "Ext Spk", "SPK_RP",
	+ "Ext Spk", "SPK_RN";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "cs-qr10:red:power";
	+ gpios = <&gpio1 4 1>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ s1 {
	+ label = "reset";
	+ gpios = <&gpio1 1 1>;
	+ linux,code = <0x198>;
	+ };
	+
	+ s2 {
	+ label = "wps";
	+ gpios = <&gpio1 3 1>;
	+ linux,code = <0x211>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+};
	+
	+&i2s {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pcm_i2s_pins>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pcm {
	+ status = "okay";
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi refclk", "rgmii1";
	+ ralink,function = "gpio";
	+ };
	+ wdt {
	+ ralink,group = "wdt";
	+ ralink,function = "wdt refclk";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&gsw {
	+ ralink,port4 = "ephy";
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/CY-SWR1100.dts
	===================================================================
	--- head/sys/gnu/dts/mips/CY-SWR1100.dts
	+++ head/sys/gnu/dts/mips/CY-SWR1100.dts
	@@ -1,73 +1,11 @@
	/dts-v1/;

	-/include/ "rt3883.dtsi"
	+#include "rt3883.dtsi"

	/ {
	compatible = "CY-SWR1100", "ralink,rt3883-soc";
	model = "Samsung CY-SWR1100";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	- phy-mode = "rgmii";
	- };
	- };
	-
	- pci@10140000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&pci_pins>;
	-
	- pci_pins: pci {
	- pci {
	- ralink,group = "pci";
	- ralink,function = "pci-fnc";
	- };
	- };
	-
	- host-bridge {
	- pci-bridge@1 {
	- status = "okay";
	-
	- wmac@0,0 {
	- ralink,5ghz = <0>;
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	- };
	- };
	- };
	- };
	-
	- wmac@10180000 {
	- status = "okay";
	- ralink,2ghz = <0>;
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	nor-flash@1c000000 {
	compatible = "cfi-flash";
	reg = <0x1c000000 0x800000>;
	@@ -150,3 +88,63 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ phy-mode = "rgmii";
	+ };
	+};
	+
	+&pci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pci_pins>;
	+
	+ pci_pins: pci {
	+ pci {
	+ ralink,group = "pci";
	+ ralink,function = "pci-fnc";
	+ };
	+ };
	+
	+ host-bridge {
	+ pci-bridge@1 {
	+ status = "okay";
	+
	+ wmac@0,0 {
	+ ralink,5ghz = <0>;
	+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	+ reg = < 0x10000 0 0 0 0 >;
	+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ };
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,2ghz = <0>;
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/D105.dts
	===================================================================
	--- head/sys/gnu/dts/mips/D105.dts
	+++ head/sys/gnu/dts/mips/D105.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "D105", "ralink,rt3050-soc";
	model = "Huawei D105";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -73,20 +64,29 @@
	linux,code = <0x198>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/DAP-1350.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DAP-1350.dts
	+++ head/sys/gnu/dts/mips/DAP-1350.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "DAP-1350", "ralink,rt3052-soc";
	@@ -10,15 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -57,18 +48,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&devdata 0x2e>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&devdata 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -118,8 +97,29 @@
	linux,code = <0x101>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&devdata 0x2e>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devdata 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/DB-WRT01.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DB-WRT01.dts
	+++ head/sys/gnu/dts/mips/DB-WRT01.dts
	@@ -1,81 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-soc";
	model = "Planex DB-WRT01";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "en25q64";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi refclk", "rgmii1";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -98,3 +28,71 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi refclk", "rgmii1";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/DCS-930.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DCS-930.dts
	+++ head/sys/gnu/dts/mips/DCS-930.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "DCS-930", "ralink,rt3050-soc";
	model = "D-Link DCS-930";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x400000>;
	@@ -94,20 +85,29 @@
	linux,code = <0x198>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/DCS-930L-B1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DCS-930L-B1.dts
	+++ head/sys/gnu/dts/mips/DCS-930L-B1.dts
	@@ -1,78 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "DCS-930L-B1", "ralink,rt5350-soc";
	model = "D-Link DCS-930L B1";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf", "led";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -106,3 +39,68 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf", "led";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/DIR-300-B1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-300-B1.dts
	+++ head/sys/gnu/dts/mips/DIR-300-B1.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "DIR-300-B1", "ralink,rt3050-soc";
	model = "D-Link DIR-300 B1";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&devdata 0x4004>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -107,3 +86,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&devdata 0x4004>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devdata 0x4000>;
	+};
	Index: head/sys/gnu/dts/mips/DIR-300-B7.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-300-B7.dts
	+++ head/sys/gnu/dts/mips/DIR-300-B7.dts
	@@ -1,67 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "DIR-300-B7", "ralink,rt5350-soc";
	model = "D-Link DIR-300 B7";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -94,10 +38,64 @@
	linux,code = <0x211>;
	};
	};
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };

	- wmac@10180000 {
	- status = "okay";
	- ralink,led-polarity = <1>;
	- ralink,mtd-eeprom = <&factory 0>;
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <0x17>;
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,led-polarity = <1>;
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/DIR-320-B1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-320-B1.dts
	+++ head/sys/gnu/dts/mips/DIR-320-B1.dts
	@@ -1,71 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "DIR-320-B1", "ralink,rt5350-soc";
	model = "D-Link DIR-320 B1";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -104,14 +44,6 @@
	};
	};

	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c0000 {
	- status = "okay";
	- };
	-
	gpio_export {
	compatible = "gpio-export";
	#size-cells = <0>;
	@@ -129,3 +61,69 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <0x17>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/DIR-600-B1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-600-B1.dts
	+++ head/sys/gnu/dts/mips/DIR-600-B1.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "DIR-600-B1", "ralink,rt3050-soc";
	model = "D-Link DIR-600 B1";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&devdata 0x4004>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -107,3 +86,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&devdata 0x4004>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devdata 0x4000>;
	+};
	Index: head/sys/gnu/dts/mips/DIR-600-B2.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-600-B2.dts
	+++ head/sys/gnu/dts/mips/DIR-600-B2.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "DIR-600-B2", "ralink,rt3050-soc";
	model = "D-Link DIR-600 B2";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,14 +38,6 @@
	};
	};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -103,3 +86,20 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devdata 0x4000>;
	+};
	Index: head/sys/gnu/dts/mips/DIR-610-A1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-610-A1.dts
	+++ head/sys/gnu/dts/mips/DIR-610-A1.dts
	@@ -1,74 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "DIR-610-A1", "ralink,rt5350-soc";
	model = "D-Link DIR-610 A1";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- devdata: partition@30000 {
	- label = "devdata";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&devdata 0x4004>;
	- };
	-
	- esw@10110000 {
	- status = "okay";
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	- };
	-
	- wmac@10180000 {
	- status = "okay";
	- ralink,led-polarity = <1>;
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -102,3 +39,64 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ devdata: partition@30000 {
	+ label = "devdata";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&devdata 0x4004>;
	+};
	+
	+&esw {
	+ status = "okay";
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <0x17>;
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,led-polarity = <1>;
	+ ralink,mtd-eeprom = <&devdata 0x4000>;
	+};
	Index: head/sys/gnu/dts/mips/DIR-615-D.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-615-D.dts
	+++ head/sys/gnu/dts/mips/DIR-615-D.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "DIR-615-D", "ralink,rt3050-soc";
	model = "D-Link DIR-615 D";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,14 +38,6 @@
	};
	};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -103,3 +86,22 @@
	};
	};
	};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devdata 0x4000>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+
	Index: head/sys/gnu/dts/mips/DIR-615-H1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-615-H1.dts
	+++ head/sys/gnu/dts/mips/DIR-615-H1.dts
	@@ -1,80 +1,11 @@
	/dts-v1/;

	-/include/ "rt3352.dtsi"
	+#include "rt3352.dtsi"

	/ {
	compatible = "DIR-615-H1", "ralink,rt3352-soc";
	model = "D-Link DIR-615 H1";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	-
	- rgmii {
	- ralink,group = "rgmii";
	- ralink,function = "rgmii";
	- };
	-
	- mdio {
	- ralink,group = "mdio";
	- ralink,function = "mdio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -123,3 +54,70 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+
	+ rgmii {
	+ ralink,group = "rgmii";
	+ ralink,function = "rgmii";
	+ };
	+
	+ mdio {
	+ ralink,group = "mdio";
	+ ralink,function = "mdio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/DIR-620-A1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-620-A1.dts
	+++ head/sys/gnu/dts/mips/DIR-620-A1.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "DIR-620-A1", "ralink,rt3050-soc";
	model = "D-Link DIR-620 A1";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -111,8 +90,29 @@
	gpios = <&gpio0 11 0>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/DIR-620-D1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-620-D1.dts
	+++ head/sys/gnu/dts/mips/DIR-620-D1.dts
	@@ -1,80 +1,11 @@
	/dts-v1/;

	-/include/ "rt3352.dtsi"
	+#include "rt3352.dtsi"

	/ {
	compatible = "DIR-620-D1", "ralink,rt3352-soc";
	model = "D-Link DIR-620 D1";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	-
	- rgmii {
	- ralink,group = "rgmii";
	- ralink,function = "rgmii";
	- };
	-
	- mdio {
	- ralink,group = "mdio";
	- ralink,function = "mdio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -101,12 +32,79 @@
	linux,code = <0x198>;
	};
	};
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };

	- ehci@101c0000 {
	- status = "okay";
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+
	+ rgmii {
	+ ralink,group = "rgmii";
	+ ralink,function = "rgmii";
	+ };

	- ohci@101c1000 {
	- status = "okay";
	+ mdio {
	+ ralink,group = "mdio";
	+ ralink,function = "mdio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/DIR-645.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-645.dts
	+++ head/sys/gnu/dts/mips/DIR-645.dts
	@@ -1,94 +1,11 @@
	/dts-v1/;

	-/include/ "rt3883.dtsi"
	+#include "rt3883.dtsi"

	/ {
	compatible = "DIR-645", "ralink,rt3883-soc";
	model = "D-Link DIR-645";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <25000000>;
	-
	- partition@0 {
	- label = "uboot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "uboot-env";
	- reg = <0x30000 0x4000>;
	- read-only;
	- };
	-
	- factory: partition@34000 {
	- label = "factory";
	- reg = <0x34000 0x4000>;
	- read-only;
	- };
	-
	- partition@38000 {
	- label = "nvram";
	- reg = <0x38000 0x8000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "devdata";
	- reg = <0x40000 0x10000>;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	-
	- port@0 {
	- mediatek,fixed-link = <1000 1 1 0>;
	- };
	- };
	-
	- wmac@10180000 {
	- ralink,5ghz = <0>;
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	rtl8367b {
	compatible = "realtek,rtl8367b";
	gpio-sda = <&gpio0 1 0>;
	@@ -140,3 +57,84 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <25000000>;
	+
	+ partition@0 {
	+ label = "uboot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "uboot-env";
	+ reg = <0x30000 0x4000>;
	+ read-only;
	+ };
	+
	+ factory: partition@34000 {
	+ label = "factory";
	+ reg = <0x34000 0x4000>;
	+ read-only;
	+ };
	+
	+ partition@38000 {
	+ label = "nvram";
	+ reg = <0x38000 0x8000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "devdata";
	+ reg = <0x40000 0x10000>;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 0>;
	+ };
	+};
	+
	+&wmac {
	+ ralink,5ghz = <0>;
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/DIR-810L.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-810L.dts
	+++ head/sys/gnu/dts/mips/DIR-810L.dts
	@@ -1,101 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
	model = "D-Link DIR-810L";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- factory5g: partition@50000 {
	- label = "factory5g";
	- reg = <0x50000 0x10000>;
	- read-only;
	- };
	-
	- partition@60000 {
	- label = "Wolf_Config";
	- reg = <0x60000 0x10000>;
	- read-only;
	- };
	-
	- partition@70000 {
	- label = "MyDlink";
	- reg = <0x70000 0x80000>;
	- read-only;
	- };
	-
	- partition@e0000 {
	- label = "Jffs2";
	- reg = <0xe0000 0x80000>;
	- read-only;
	- };
	-
	- partition@170000 {
	- label = "firmware";
	- reg = <0x170000 0x690000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- mediatek,portmap = "llllw";
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -134,3 +44,91 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory5g: partition@50000 {
	+ label = "factory5g";
	+ reg = <0x50000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@60000 {
	+ label = "Wolf_Config";
	+ reg = <0x60000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@70000 {
	+ label = "MyDlink";
	+ reg = <0x70000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@e0000 {
	+ label = "Jffs2";
	+ reg = <0xe0000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@170000 {
	+ label = "firmware";
	+ reg = <0x170000 0x690000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/DIR-860L-B1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/DIR-860L-B1.dts
	+++ head/sys/gnu/dts/mips/DIR-860L-B1.dts
	@@ -15,87 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x4000>;
	- read-only;
	- };
	-
	- radio: partition@34000 {
	- label = "radio";
	- reg = <0x34000 0x4000>;
	- read-only;
	- };
	-
	- factory: partition@38000 {
	- label = "factory";
	- reg = <0x38000 0x8000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "defaults";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	- };
	-
	- pcie@1e140000 {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&radio 0x2000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&radio 0>;
	- mediatek,5ghz = <0>;
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -127,3 +46,82 @@
	poll-interval = <20>;
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x4000>;
	+ read-only;
	+ };
	+
	+ radio: partition@34000 {
	+ label = "radio";
	+ reg = <0x34000 0x4000>;
	+ read-only;
	+ };
	+
	+ factory: partition@38000 {
	+ label = "factory";
	+ reg = <0x38000 0x8000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "defaults";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 0x2000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 0>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/E1700.dts
	===================================================================
	--- head/sys/gnu/dts/mips/E1700.dts
	+++ head/sys/gnu/dts/mips/E1700.dts
	@@ -10,115 +10,12 @@

	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "linksys,e1700", "ralink,mt7620a-soc";
	model = "Linksys E1700";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "config";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x28>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	-
	- port@5 {
	- status = "okay";
	- mediatek,fixed-link = <1000 1 1 1>;
	- phy-mode = "rgmii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@0 {
	- reg = <0>;
	- phy-mode = "rgmii";
	- };
	-
	- phy1: ethernet-phy@1 {
	- reg = <1>;
	- phy-mode = "rgmii";
	- };
	-
	- phy2: ethernet-phy@2 {
	- reg = <2>;
	- phy-mode = "rgmii";
	- };
	-
	- phy3: ethernet-phy@3 {
	- reg = <3>;
	- phy-mode = "rgmii";
	- };
	-
	- phy4: ethernet-phy@4 {
	- reg = <4>;
	- phy-mode = "rgmii";
	- };
	-
	- phy1f: ethernet-phy@1f {
	- reg = <0x1f>;
	- phy-mode = "rgmii";
	- };
	- };
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "gmac";
	- mediatek,mt7530 = <1>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -152,3 +49,104 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x28>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	+
	+ port@5 {
	+ status = "okay";
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ reg = <0>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy1: ethernet-phy@1 {
	+ reg = <1>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy2: ethernet-phy@2 {
	+ reg = <2>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy3: ethernet-phy@3 {
	+ reg = <3>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy1f: ethernet-phy@1f {
	+ reg = <0x1f>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&gsw {
	+ mediatek,port4 = "gmac";
	+ mediatek,mt7530 = <1>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/ESR-9753.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ESR-9753.dts
	+++ head/sys/gnu/dts/mips/ESR-9753.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "ESR-9753", "ralink,rt3052-soc";
	model = "Senao / EnGenius ESR-9753";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -79,16 +70,25 @@
	linux,code = <0x211>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	};
	Index: head/sys/gnu/dts/mips/EX2700.dts
	===================================================================
	--- head/sys/gnu/dts/mips/EX2700.dts
	+++ head/sys/gnu/dts/mips/EX2700.dts
	@@ -10,7 +10,7 @@

	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-soc";
	@@ -20,73 +20,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- palmbus@10000000 {
	-
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "firmware";
	- reg = <0x40000 0x3b0000>;
	- };
	-
	- art: partition@3f0000 {
	- label = "art";
	- reg = <0x3f0000 0x10000>;
	- read-only;
	- };
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&art 0x0>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&art 0x1000>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- // spi refclk: pins 37, 38, 39
	- // uartf: pins 8, 9, 10, 11, 12, 13, 14
	- // i2c: pins 1, 2
	- ralink,group = "i2c", "uartf", "spi refclk";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -146,3 +79,67 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0x3b0000>;
	+ };
	+
	+ art: partition@3f0000 {
	+ label = "art";
	+ reg = <0x3f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&art 0x0>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&art 0x1000>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ // spi refclk: pins 37, 38, 39
	+ // uartf: pins 8, 9, 10, 11, 12, 13, 14
	+ // i2c: pins 1, 2
	+ ralink,group = "i2c", "uartf", "spi refclk";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/F5D8235_V1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/F5D8235_V1.dts
	+++ head/sys/gnu/dts/mips/F5D8235_V1.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt2880.dtsi"
	+#include "rt2880.dtsi"

	/ {
	#address-cells = <1>;
	@@ -8,21 +8,6 @@
	compatible = "F5D8235_V1", "ralink,rt2880-soc";
	model = "Belkin F5D8235 v1";

	- palmbus@300000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -55,21 +40,6 @@
	};
	};

	- ethernet@400000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x4>;
	-
	- port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	- };
	- };
	-
	- /* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */
	-/* wmac@480000 {
	- status = "okay";
	- ralink,mtd-eeprom = <&u-boot 0x40000>;
	- };
	-*/
	rtl8366s {
	compatible = "realtek,rtl8366s";
	gpio-sda = <&gpio0 1 0>;
	@@ -109,3 +79,33 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x4>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ };
	+};
	+
	+/* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */
	+/*&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&u-boot 0x40000>;
	+};
	+*/
	+
	Index: head/sys/gnu/dts/mips/F5D8235_V2.dts
	===================================================================
	--- head/sys/gnu/dts/mips/F5D8235_V2.dts
	+++ head/sys/gnu/dts/mips/F5D8235_V2.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "F5D8235_V2", "ralink,rt3052-soc";
	model = "Belkin F5D8235 v2";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -45,22 +36,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&uboot 0x40004>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&uboot 0x40000>;
	- };
	-
	- otg@101c0000 {
	- status = "okay";
	- };
	-
	rtl8366rb {
	compatible = "rtl8366rb";
	gpio-sda = <&gpio0 1 0>;
	@@ -116,3 +91,28 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&uboot 0x40004>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&uboot 0x40000>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/F7C027.dts
	===================================================================
	--- head/sys/gnu/dts/mips/F7C027.dts
	+++ head/sys/gnu/dts/mips/F7C027.dts
	@@ -1,87 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "F7C027", "ralink,rt5350-soc";
	model = "Belkin F7C027";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l12805d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x770000>;
	- };
	-
	- partition@7c0000 {
	- label = "firmware2";
	- reg = <0x7c0000 0x770000>;
	- };
	-
	- partition@f30000 {
	- label = "belkin_settings";
	- reg = <0xf30000 0xa0000>;
	- };
	-
	- partition@fd0000 {
	- label = "unknown";
	- reg = <0xfd0000 0x10000>;
	- };
	-
	- partition@fe0000 {
	- label = "nvram";
	- reg = <0xfe0000 0x10000>;
	- };
	-
	- partition@ff0000 {
	- label = "user_factory";
	- reg = <0xff0000 0x10000>;
	- };
	- };
	- };
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -131,3 +55,77 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l12805d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x770000>;
	+ };
	+
	+ partition@7c0000 {
	+ label = "firmware2";
	+ reg = <0x7c0000 0x770000>;
	+ };
	+
	+ partition@f30000 {
	+ label = "belkin_settings";
	+ reg = <0xf30000 0xa0000>;
	+ };
	+
	+ partition@fd0000 {
	+ label = "unknown";
	+ reg = <0xfd0000 0x10000>;
	+ };
	+
	+ partition@fe0000 {
	+ label = "nvram";
	+ reg = <0xfe0000 0x10000>;
	+ };
	+
	+ partition@ff0000 {
	+ label = "user_factory";
	+ reg = <0xff0000 0x10000>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/FIREWRT.dts
	===================================================================
	--- head/sys/gnu/dts/mips/FIREWRT.dts
	+++ head/sys/gnu/dts/mips/FIREWRT.dts
	@@ -15,74 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	- };
	-
	- pcie@1e140000 {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	- };
	-
	- ethernet@1e100000 {
	- mtd-mac-address = <&factory 0xe000>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -110,13 +42,79 @@
	linux,code = <116>;
	};
	};
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wdt", "rgmii2";
	- ralink,function = "gpio";
	- };
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "rgmii2";
	+ ralink,function = "gpio";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/FONERA20N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/FONERA20N.dts
	+++ head/sys/gnu/dts/mips/FONERA20N.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "FONERA20N", "ralink,rt3052-soc";
	model = "La Fonera 2.0N";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -85,50 +76,59 @@
	linux,input-type = <5>; /* EV_SW */
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	-
	- port@0 {
	- compatible = "swconfig,port";
	- swconfig,segment = "lan";
	- swconfig,portmap = <0 4>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};

	- port@1 {
	- compatible = "swconfig,port";
	- swconfig,segment = "lan";
	- swconfig,portmap = <1 3>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;

	- port@2 {
	- compatible = "swconfig,port";
	- swconfig,segment = "lan";
	- swconfig,portmap = <2 2>;
	- };
	+ port@0 {
	+ compatible = "swconfig,port";
	+ swconfig,segment = "lan";
	+ swconfig,portmap = <0 4>;
	+ };

	- port@3 {
	- compatible = "swconfig,port";
	- swconfig,segment = "lan";
	- swconfig,portmap = <3 1>;
	- };
	+ port@1 {
	+ compatible = "swconfig,port";
	+ swconfig,segment = "lan";
	+ swconfig,portmap = <1 3>;
	+ };

	- port@4 {
	- compatible = "swconfig,port";
	- swconfig,segment = "wan";
	- swconfig,portmap = <4 0>;
	- };
	+ port@2 {
	+ compatible = "swconfig,port";
	+ swconfig,segment = "lan";
	+ swconfig,portmap = <2 2>;
	};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	+ port@3 {
	+ compatible = "swconfig,port";
	+ swconfig,segment = "lan";
	+ swconfig,portmap = <3 1>;
	};

	- otg@101c0000 {
	- status = "okay";
	+ port@4 {
	+ compatible = "swconfig,port";
	+ swconfig,segment = "wan";
	+ swconfig,portmap = <4 0>;
	};
	};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/FREESTATION5.dts
	===================================================================
	--- head/sys/gnu/dts/mips/FREESTATION5.dts
	+++ head/sys/gnu/dts/mips/FREESTATION5.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "FREESTATION5", "ralink,rt3050-soc";
	@@ -10,15 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -51,22 +42,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x01>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- otg@101c0000 {
	- status = "okay";
	- };
	-
	gpio-export {
	compatible = "gpio-export";

	@@ -100,3 +75,28 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x01>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/GL-MT300A.dts
	===================================================================
	--- head/sys/gnu/dts/mips/GL-MT300A.dts
	+++ head/sys/gnu/dts/mips/GL-MT300A.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "GL-MT300A", "ralink,mt7620a-soc";
	@@ -10,109 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "w25q128";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf80000>;
	- };
	-
	- partition@ff0000 {
	- label = "art";
	- reg = <0xff0000 0x10000>;
	- };
	- };
	- };
	- };
	-
	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wled","ephy","uartf","i2c";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -162,3 +59,104 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "w25q128";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf80000>;
	+ };
	+
	+ partition@ff0000 {
	+ label = "art";
	+ reg = <0xff0000 0x10000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4000>;
	+ ralink,port-map = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wled","ephy","uartf","i2c";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/GL-MT300N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/GL-MT300N.dts
	+++ head/sys/gnu/dts/mips/GL-MT300N.dts
	@@ -1,112 +1,15 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	- compatible = "GL-MT300N", "ralink,mt7620n-soc";
	+ compatible = "GL-MT300N", "ralink,mt7620a-soc";
	model = "GL-MT300N";

	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "w25q128";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf80000>;
	- };
	-
	- partition@ff0000 {
	- label = "art";
	- reg = <0xff0000 0x10000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wled","ephy","i2c";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -151,3 +54,98 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "w25q128";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf80000>;
	+ };
	+
	+ partition@ff0000 {
	+ label = "art";
	+ reg = <0xff0000 0x10000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4000>;
	+ ralink,port-map = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wled","ephy","i2c";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/GL-MT750.dts
	===================================================================
	--- head/sys/gnu/dts/mips/GL-MT750.dts
	+++ head/sys/gnu/dts/mips/GL-MT750.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "GL-MT750", "ralink,mt7620a-soc";
	@@ -10,109 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "w25q128";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf80000>;
	- };
	-
	- partition@ff0000 {
	- label = "art";
	- reg = <0xff0000 0x10000>;
	- };
	- };
	- };
	- };
	-
	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "llllw";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wled","ephy","uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -157,3 +54,104 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "w25q128";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf80000>;
	+ };
	+
	+ partition@ff0000 {
	+ label = "art";
	+ reg = <0xff0000 0x10000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4000>;
	+ ralink,port-map = "llllw";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wled","ephy","uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/HC5661.dts
	===================================================================
	--- head/sys/gnu/dts/mips/HC5661.dts
	+++ head/sys/gnu/dts/mips/HC5661.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "HC5XXX.dtsi"
	+#include "HC5XXX.dtsi"

	/ {
	compatible = "HC5661", "ralink,mt7620a-soc";
	Index: head/sys/gnu/dts/mips/HC5761.dts
	===================================================================
	--- head/sys/gnu/dts/mips/HC5761.dts
	+++ head/sys/gnu/dts/mips/HC5761.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "HC5XXX.dtsi"
	+#include "HC5XXX.dtsi"

	/ {
	compatible = "HC5761", "ralink,mt7620a-soc";
	Index: head/sys/gnu/dts/mips/HC5861.dts
	===================================================================
	--- head/sys/gnu/dts/mips/HC5861.dts
	+++ head/sys/gnu/dts/mips/HC5861.dts
	@@ -1,49 +1,11 @@
	/dts-v1/;

	-/include/ "HC5XXX.dtsi"
	+#include "HC5XXX.dtsi"

	/ {
	compatible = "HC5861", "ralink,mt7620a-soc";
	model = "HiWiFi HC5861";

	- ethernet@10100000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x4>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	- mediatek,portmap = "wllll";
	-
	- port@4 {
	- status = "okay";
	- phy-handle = <&phy4>;
	- phy-mode = "rgmii";
	- };
	-
	- port@5 {
	- status = "okay";
	- phy-handle = <&phy5>;
	- phy-mode = "rgmii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy4: ethernet-phy@4 {
	- reg = <4>;
	- phy-mode = "rgmii";
	- };
	-
	- phy5: ethernet-phy@5 {
	- reg = <5>;
	- phy-mode = "rgmii";
	- };
	- };
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "gmac";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -90,3 +52,41 @@
	};
	};
	};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x4>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	+ mediatek,portmap = "wllll";
	+
	+ port@4 {
	+ status = "okay";
	+ phy-handle = <&phy4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ port@5 {
	+ status = "okay";
	+ phy-handle = <&phy5>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&gsw {
	+ mediatek,port4 = "gmac";
	+};
	Index: head/sys/gnu/dts/mips/HC5XXX.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/HC5XXX.dtsi
	+++ head/sys/gnu/dts/mips/HC5XXX.dtsi
	@@ -1,120 +1,10 @@
	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- sysc@0 {
	- ralink,gpiomux = "i2c", "jtag";
	- ralink,uartmux = "gpio";
	- ralink,wdtmux = <1>;
	- };
	-
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf80000>;
	- };
	-
	- partition@fd0000 {
	- label = "hwf_config";
	- reg = <0xfd0000 0x10000>;
	- };
	-
	- bdinfo: partition@fe0000 {
	- label = "bdinfo";
	- reg = <0xfe0000 0x10000>;
	- };
	-
	- partition@ff0000 {
	- label = "backup";
	- reg = <0xff0000 0x10000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uartf", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -139,3 +29,111 @@
	};
	};
	};
	+
	+&sysc {
	+ ralink,gpiomux = "i2c", "jtag";
	+ ralink,uartmux = "gpio";
	+ ralink,wdtmux = <1>;
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf80000>;
	+ };
	+
	+ partition@fd0000 {
	+ label = "hwf_config";
	+ reg = <0xfd0000 0x10000>;
	+ };
	+
	+ bdinfo: partition@fe0000 {
	+ label = "bdinfo";
	+ reg = <0xfe0000 0x10000>;
	+ };
	+
	+ partition@ff0000 {
	+ label = "backup";
	+ reg = <0xff0000 0x10000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default {
	+ gpio {
	+ ralink,group = "uartf", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+
	+ pa {
	+ ralink,group = "pa";
	+ ralink,function = "pa";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/HG255D.dts
	===================================================================
	--- head/sys/gnu/dts/mips/HG255D.dts
	+++ head/sys/gnu/dts/mips/HG255D.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "HG255D", "ralink,rt3052-soc";
	model = "HuaWei HG255D";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x1000000>;
	@@ -111,20 +102,29 @@
	linux,code = <0xf7>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/HLKRM04.dts
	===================================================================
	--- head/sys/gnu/dts/mips/HLKRM04.dts
	+++ head/sys/gnu/dts/mips/HLKRM04.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "HLKRM04", "ralink,rt5350-soc";
	@@ -15,78 +15,6 @@
	bootargs = "console=ttyS1,57600";
	};

	- palmbus@10000000 {
	- uart@500 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag";
	- ralink,function = "gpio";
	- };
	-
	- uartf_gpio {
	- ralink,group = "uartf";
	- ralink,function = "gpio uartf";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-export {
	compatible = "gpio-export";
	#size-cells = <0>;
	@@ -123,3 +51,73 @@
	};
	};
	};
	+
	+&uart {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag";
	+ ralink,function = "gpio";
	+ };
	+
	+ uartf_gpio {
	+ ralink,group = "uartf";
	+ ralink,function = "gpio uartf";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/HPM.dts
	===================================================================
	--- head/sys/gnu/dts/mips/HPM.dts
	+++ head/sys/gnu/dts/mips/HPM.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3883.dtsi"
	+#include "rt3883.dtsi"

	/ {
	compatible = "HPM", "ralink,rt3883-soc";
	@@ -10,78 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- compatible = "jedec,spi-nor";
	- spi-max-frequency = <25000000>;
	- reg = <0>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	-
	- partition@0 {
	- reg = <0x0 0x0030000>;
	- label = "u-boot";
	- read-only;
	- };
	-
	- partition@30000 {
	- reg = <0x00030000 0x00010000>;
	- label = "config";
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- reg = <0x00040000 0x00010000>;
	- label = "factory";
	- read-only;
	- };
	-
	- partition@50000 {
	- reg = <0x00050000 0x00fb0000>;
	- label = "firmware";
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- phy-handle = <&phy0>;
	- phy-mode = "rgmii";
	- mtd-mac-address = <&factory 0x28>;
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@4 {
	- reg = <4>;
	- };
	- };
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -147,3 +75,73 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ compatible = "jedec,spi-nor";
	+ spi-max-frequency = <25000000>;
	+ reg = <0>;
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+
	+ partition@0 {
	+ reg = <0x0 0x0030000>;
	+ label = "u-boot";
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ reg = <0x00030000 0x00010000>;
	+ label = "config";
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ reg = <0x00040000 0x00010000>;
	+ label = "factory";
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ reg = <0x00050000 0x00fb0000>;
	+ label = "firmware";
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ phy-handle = <&phy0>;
	+ phy-mode = "rgmii";
	+ mtd-mac-address = <&factory 0x28>;
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@4 {
	+ reg = <4>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/HT-TM02.dts
	===================================================================
	--- head/sys/gnu/dts/mips/HT-TM02.dts
	+++ head/sys/gnu/dts/mips/HT-TM02.dts
	@@ -1,82 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "HT-TM02", "ralink,rt5350-soc";
	model = "HooToo HT-TM02";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x10>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -111,3 +40,73 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x10>;
	+ mediatek,portdisable = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/HW550-3G.dts
	===================================================================
	--- head/sys/gnu/dts/mips/HW550-3G.dts
	+++ head/sys/gnu/dts/mips/HW550-3G.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "HW550-3G", "ralink,rt3052-soc";
	model = "Aztech HW550-3G";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -107,8 +86,29 @@
	linux,code = <0x211>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/IP2202.dts
	===================================================================
	--- head/sys/gnu/dts/mips/IP2202.dts
	+++ head/sys/gnu/dts/mips/IP2202.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "IP2202", "ralink,rt3052-soc";
	model = "Poray IP2202";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,14 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -81,8 +64,25 @@
	linux,code = <0x198>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/JHR-N805R.dts
	===================================================================
	--- head/sys/gnu/dts/mips/JHR-N805R.dts
	+++ head/sys/gnu/dts/mips/JHR-N805R.dts
	@@ -1,70 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "JHR-N805R", "ralink,rt3050-soc";
	model = "JCG JHR-N805R";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x2e>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -87,3 +28,60 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x2e>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/JHR-N825R.dts
	===================================================================
	--- head/sys/gnu/dts/mips/JHR-N825R.dts
	+++ head/sys/gnu/dts/mips/JHR-N825R.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "JHR-N825R", "ralink,rt3052-soc";
	model = "JCG JHR-N825R";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x2e>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";
	system {
	@@ -79,3 +58,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x2e>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/JHR-N926R.dts
	===================================================================
	--- head/sys/gnu/dts/mips/JHR-N926R.dts
	+++ head/sys/gnu/dts/mips/JHR-N926R.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "JHR-N926R", "ralink,rt3052-soc";
	model = "JCG JHR-N926R";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x2e>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -125,3 +104,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x2e>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/LINKIT7688.dts
	===================================================================
	--- head/sys/gnu/dts/mips/LINKIT7688.dts
	+++ head/sys/gnu/dts/mips/LINKIT7688.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7628an.dtsi"
	+#include "mt7628an.dtsi"

	/ {
	compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	@@ -10,133 +10,15 @@
	bootargs = "console=ttyS2,57600";
	};

	+ aliases {
	+ serial0 = &uart2;
	+ };
	+
	memory@0 {
	device_type = "memory";
	reg = <0x0 0x8000000>;
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "gpio";
	- ralink,function = "gpio";
	- };
	-
	- perst {
	- ralink,group = "perst";
	- ralink,function = "gpio";
	- };
	-
	- refclk {
	- ralink,group = "refclk";
	- ralink,function = "gpio";
	- };
	-
	- i2s {
	- ralink,group = "i2s";
	- ralink,function = "gpio";
	- };
	-
	- spis {
	- ralink,group = "spis";
	- ralink,function = "gpio";
	- };
	-
	- wled_kn {
	- ralink,group = "wled_kn";
	- ralink,function = "gpio";
	- };
	-
	- wled_an {
	- ralink,group = "wled_an";
	- ralink,function = "wled_an";
	- };
	-
	- wdt {
	- ralink,group = "wdt";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- wmac@10300000 {
	- status = "okay";
	- };
	-
	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- pinctrl-names = "default";
	- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	- spi-max-frequency = <40000000>;
	- m25p,chunked-io = <31>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	-
	- spidev@1 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "spidev";
	- reg = <1 0>;
	- spi-max-frequency = <40000000>;
	- };
	- };
	-
	- i2c@900 {
	- status = "okay";
	- };
	-
	- uart1@d00 {
	- status = "okay";
	- };
	-
	- uart2@e00 {
	- status = "okay";
	- };
	-
	- pwm@5000 {
	- status = "okay";
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- sdhci@10130000 {
	- status = "okay";
	- mediatek,cd-high;
	- };
	-
	bootstrap {
	compatible = "mediatek,linkit";

	@@ -145,7 +27,7 @@

	gpio-leds {
	compatible = "gpio-leds";
	-
	+
	wifi {
	label = "mediatek:orange:wifi";
	gpios = <&wgpio 0 0>;
	@@ -158,7 +40,7 @@
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;
	-
	+
	wps {
	label = "reset";
	gpios = <&gpio1 6 1>;
	@@ -173,5 +55,128 @@
	gpio-controller;
	#gpio-cells = <2>;
	};
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "gpio";
	+ ralink,function = "gpio";
	+ };
	+
	+ perst {
	+ ralink,group = "perst";
	+ ralink,function = "gpio";
	+ };
	+
	+ refclk {
	+ ralink,group = "refclk";
	+ ralink,function = "gpio";
	+ };
	+
	+ i2s {
	+ ralink,group = "i2s";
	+ ralink,function = "gpio";
	+ };
	+
	+ spis {
	+ ralink,group = "spis";
	+ ralink,function = "gpio";
	+ };
	+
	+ wled_kn {
	+ ralink,group = "wled_kn";
	+ ralink,function = "gpio";
	+ };
	+
	+ wled_an {
	+ ralink,group = "wled_an";
	+ ralink,function = "wled_an";
	+ };
	+
	+ wdt {
	+ ralink,group = "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l25635e";
	+ spi-max-frequency = <40000000>;
	+ m25p,chunked-io = <31>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x1fb0000>;
	+ };
	+ };
	+
	+ spidev@1 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "spidev";
	+ reg = <1 0>;
	+ spi-max-frequency = <40000000>;
	+ };
	+};
	+
	+&i2c {
	+ status = "okay";
	+};
	+
	+&uart1 {
	+ status = "okay";
	+};
	+
	+&uart2 {
	+ status = "okay";
	+};
	+
	+&pwm {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&sdhci {
	+ status = "okay";
	+ mediatek,cd-high;
	+};

	+&wmac {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/M2M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/M2M.dts
	+++ head/sys/gnu/dts/mips/M2M.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "M2M", "ralink,rt5350-soc";
	@@ -10,53 +10,6 @@
	bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
	};

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "Bootloader";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "Config";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "Factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -89,24 +42,69 @@
	linux,code = <0x198>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	+&spi0 {
	+ status = "okay";

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;

	- ehci@101c0000 {
	- status = "okay";
	- };
	+ partition@0 {
	+ label = "Bootloader";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };

	- ohci@101c1000 {
	- status = "okay";
	+ partition@30000 {
	+ label = "Config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "Factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0x0>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	Index: head/sys/gnu/dts/mips/M3.dts
	===================================================================
	--- head/sys/gnu/dts/mips/M3.dts
	+++ head/sys/gnu/dts/mips/M3.dts
	@@ -1,67 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "M3", "ralink,rt5350-soc";
	model = "Poray M3";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q32";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -90,17 +34,71 @@
	linux,input-type = <5>;
	};
	};
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	- };
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q32";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- ehci@101c0000 {
	- status = "okay";
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	};
	+};

	- ohci@101c1000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <1>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/M4-4M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/M4-4M.dts
	+++ head/sys/gnu/dts/mips/M4-4M.dts
	@@ -1,67 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "M4", "ralink,rt5350-soc";
	model = "Poray M4";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "pm25lq032";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -83,12 +27,66 @@
	linux,code = <0x198>;
	};
	};
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "pm25lq032";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };

	- ehci@101c0000 {
	- status = "okay";
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	};
	+};

	- ohci@101c1000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <1>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/M4-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/M4-8M.dts
	+++ head/sys/gnu/dts/mips/M4-8M.dts
	@@ -1,67 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "M4", "ralink,rt5350-soc";
	model = "Poray M4";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "gd25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -83,17 +27,71 @@
	linux,code = <0x198>;
	};
	};
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	- };
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "gd25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- ehci@101c0000 {
	- status = "okay";
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};
	+};

	- ohci@101c1000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <1>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MINIEMBPLUG.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MINIEMBPLUG.dts
	+++ head/sys/gnu/dts/mips/MINIEMBPLUG.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "MINIEMBPLUG", "ralink,rt5350-soc";
	model = "Omnima MiniEMBPlug";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -59,62 +50,73 @@
	linux,code = <0x211>;
	};
	};
	+};

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	+&gpio0 {
	+ status = "okay";
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&spi0 {
	+ status = "okay";

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };

	- otg@101c0000 {
	- status = "okay";
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MINIEMBWIFI.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MINIEMBWIFI.dts
	+++ head/sys/gnu/dts/mips/MINIEMBWIFI.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "MINIEMBWIFI", "ralink,rt3052-soc";
	model = "Omnima MiniEMBWiFi";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -73,20 +64,29 @@
	reg = <0x50000 0x7b0000>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/MIWIFI-MINI.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MIWIFI-MINI.dts
	+++ head/sys/gnu/dts/mips/MIWIFI-MINI.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
	@@ -10,146 +10,144 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	+ gpio-leds {
	+ compatible = "gpio-leds";

	- gpio1: gpio@638 {
	- status = "okay";
	+ blue {
	+ label = "miwifi-mini:blue:status";
	+ gpios = <&gpio1 0 1>;
	};

	- gpio2: gpio@660 {
	- status = "okay";
	+ yellow {
	+ label = "miwifi-mini:yellow:status";
	+ gpios = <&gpio1 2 1>;
	};

	- spi@b00 {
	- status = "okay";
	+ red {
	+ label = "miwifi-mini:red:status";
	+ gpios = <&gpio1 5 1>;
	+ };
	+ };

	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;

	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- };
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 0>;
	+ linux,code = <0x198>;
	+ };
	+ };
	+};

	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	+&gpio0 {
	+ status = "okay";
	+};

	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	+&gpio1 {
	+ status = "okay";
	+};

	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf80000>;
	- };
	+&gpio2 {
	+ status = "okay";
	+};

	- partition@fd0000 {
	- label = "crash";
	- reg = <0xfd0000 0x10000>;
	- };
	+&spi0 {
	+ status = "okay";

	- partition@fe0000 {
	- label = "reserved";
	- reg = <0xfe0000 0x10000>;
	- read-only;
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;

	- partition@ff0000 {
	- label = "Bdata";
	- reg = <0xff0000 0x10000>;
	- };
	- };
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	};
	- };

	- ehci@101c0000 {
	- status = "okay";
	- };
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };

	- ohci@101c1000 {
	- status = "okay";
	- };
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf80000>;
	+ };

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+ partition@fd0000 {
	+ label = "crash";
	+ reg = <0xfd0000 0x10000>;
	+ };

	- pcie@10140000 {
	- status = "okay";
	+ partition@fe0000 {
	+ label = "reserved";
	+ reg = <0xfe0000 0x10000>;
	+ read-only;
	+ };

	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	+ partition@ff0000 {
	+ label = "Bdata";
	+ reg = <0xff0000 0x10000>;
	};
	};
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "rgmii1";
	- ralink,function = "gpio";
	- };
	+&ehci {
	+ status = "okay";
	+};

	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	- };
	- };
	+&ohci {
	+ status = "okay";
	+};

	- gpio-leds {
	- compatible = "gpio-leds";
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};

	- blue {
	- label = "miwifi-mini:blue:status";
	- gpios = <&gpio1 0 1>;
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};

	- yellow {
	- label = "miwifi-mini:yellow:status";
	- gpios = <&gpio1 2 1>;
	- };
	+&pcie {
	+ status = "okay";

	- red {
	- label = "miwifi-mini:red:status";
	- gpios = <&gpio1 5 1>;
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	};
	};
	+};

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "rgmii1";
	+ ralink,function = "gpio";
	+ };

	- reset {
	- label = "reset";
	- gpios = <&gpio1 6 0>;
	- linux,code = <0x198>;
	+ pa {
	+ ralink,group = "pa";
	+ ralink,function = "pa";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/MIWIFI-NANO.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MIWIFI-NANO.dts
	+++ head/sys/gnu/dts/mips/MIWIFI-NANO.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7628an.dtsi"
	+#include "mt7628an.dtsi"

	/ {
	compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc";
	@@ -15,15 +15,6 @@
	reg = <0x0 0x4000000>;
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "refclk", "wled", "gpio";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -44,48 +35,54 @@

	};
	};
	+};

	-
	- wmac@10300000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "refclk", "wled", "gpio";
	+ ralink,function = "gpio";
	+ };
	};
	+};
	+
	+&wmac {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	- m25p,chunked-io = <32>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	};
	Index: head/sys/gnu/dts/mips/MLW221.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MLW221.dts
	+++ head/sys/gnu/dts/mips/MLW221.dts
	@@ -1,92 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "mlw221", "ralink,mt7620n-soc";
	model = "Kingston MLW221";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl129p1";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf60000>;
	- };
	-
	- partition@fb0000 {
	- label = "user-config";
	- reg = <0xfb0000 0x50000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "i2c", "ephy", "wled";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -120,3 +39,82 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl129p1";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf60000>;
	+ };
	+
	+ partition@fb0000 {
	+ label = "user-config";
	+ reg = <0xfb0000 0x50000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "ephy", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/MLWG2.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MLWG2.dts
	+++ head/sys/gnu/dts/mips/MLWG2.dts
	@@ -1,92 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "mlwg2", "ralink,mt7620n-soc";
	model = "Kingston MLWG2";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf60000>;
	- };
	-
	- partition@fb0000 {
	- label = "user-config";
	- reg = <0xfb0000 0x50000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "i2c", "ephy", "wled";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -120,3 +39,82 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf60000>;
	+ };
	+
	+ partition@fb0000 {
	+ label = "user-config";
	+ reg = <0xfb0000 0x50000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "ephy", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/MOFI3500-3GN.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MOFI3500-3GN.dts
	+++ head/sys/gnu/dts/mips/MOFI3500-3GN.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "MOFI3500-3GN", "ralink,rt3052-soc";
	model = "MoFi Network MOFI3500-3GN";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,10 +38,6 @@
	};
	};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -99,13 +86,26 @@
	linux,code = <0x211>;
	};
	};
	+};

	- wmac@10180000 {
	- status = "okay";
	- ralink,mtd-eeprom = <&factory 0>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/MPRA1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MPRA1.dts
	+++ head/sys/gnu/dts/mips/MPRA1.dts
	@@ -1,82 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "MPRA1", "ralink,rt5350-soc";
	model = "HAME MPR-A1";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	-
	- gpio1: gpio@660 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -121,3 +50,72 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MPRA2.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MPRA2.dts
	+++ head/sys/gnu/dts/mips/MPRA2.dts
	@@ -1,78 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "MPRA2", "ralink,rt5350-soc";
	model = "HAME MPR-A2";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -117,3 +50,68 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MR-102N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MR-102N.dts
	+++ head/sys/gnu/dts/mips/MR-102N.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "MR-102N", "ralink,rt3052-soc";
	model = "AXIMCom MR-102N";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -57,20 +48,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- status = "okay";
	- #mediatek,portmap = <0x3e>;
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -108,8 +85,32 @@
	linux,code = <0x211>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ status = "okay";
	+ #mediatek,portmap = <0x3e>;
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MT7620a.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MT7620a.dts
	+++ head/sys/gnu/dts/mips/MT7620a.dts
	@@ -1,127 +1,125 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620a + MT7610e evaluation board";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+ gpio-keys-polled {
	+ compatible = "gpio-keys";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ s2 {
	+ label = "S2";
	+ gpios = <&gpio0 1 1>;
	+ linux,code = <0x100>;
	};
	- };

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf";
	- ralink,function = "gpio";
	- };
	+ s3 {
	+ label = "S3";
	+ gpios = <&gpio0 2 1>;
	+ linux,code = <0x101>;
	};
	};
	+};

	- ethernet@10100000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	- mediatek,portmap = "llllw";
	+&spi0 {
	+ status = "okay";

	- port@4 {
	- status = "okay";
	- phy-mode = "rgmii";
	- phy-handle = <&phy4>;
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;

	- port@5 {
	- status = "okay";
	- phy-mode = "rgmii";
	- phy-handle = <&phy5>;
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- mdio-bus {
	- status = "okay";
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };

	- phy4: ethernet-phy@4 {
	- reg = <4>;
	- phy-mode = "rgmii";
	- };
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- phy5: ethernet-phy@5 {
	- reg = <5>;
	- phy-mode = "rgmii";
	- };
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	+};

	- gsw@10110000 {
	- mediatek,port4 = "gmac";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	+ mediatek,portmap = "llllw";

	- sdhci@10130000 {
	+ port@4 {
	status = "okay";
	+ phy-mode = "rgmii";
	+ phy-handle = <&phy4>;
	};

	- pcie@10140000 {
	+ port@5 {
	status = "okay";
	+ phy-mode = "rgmii";
	+ phy-handle = <&phy5>;
	};

	- gpio-keys-polled {
	- compatible = "gpio-keys";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	+ mdio-bus {
	+ status = "okay";

	- s2 {
	- label = "S2";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	};

	- s3 {
	- label = "S3";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x101>;
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	};
	};
	+};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&gsw {
	+ mediatek,port4 = "gmac";
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/MT7620a_MT7530.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MT7620a_MT7530.dts
	+++ head/sys/gnu/dts/mips/MT7620a_MT7530.dts
	@@ -1,119 +1,117 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620a + MT7530 evaluation board";
	+};
	+
	+&spi0 {
	+ status = "okay";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};
	- };

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf";
	- ralink,function = "gpio";
	- };
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};
	- };

	- ethernet@10100000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	- mediatek,portmap = "llllw";
	-
	- port@5 {
	- status = "okay";
	- mediatek,fixed-link = <1000 1 1 1>;
	- phy-mode = "rgmii";
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	};

	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@0 {
	- reg = <0>;
	- phy-mode = "rgmii";
	- };
	-
	- phy1: ethernet-phy@1 {
	- reg = <1>;
	- phy-mode = "rgmii";
	- };
	-
	- phy2: ethernet-phy@2 {
	- reg = <2>;
	- phy-mode = "rgmii";
	- };
	-
	- phy3: ethernet-phy@3 {
	- reg = <3>;
	- phy-mode = "rgmii";
	- };
	-
	- phy4: ethernet-phy@4 {
	- reg = <4>;
	- phy-mode = "rgmii";
	- };
	-
	- phy1f: ethernet-phy@1f {
	- reg = <0x1f>;
	- phy-mode = "rgmii";
	- };
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	+};

	- gsw@10110000 {
	- mediatek,port4 = "gmac";
	- mediatek,mt7530 = <1>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- pcie@10140000 {
	- status = "okay";
	- };
	+&ethernet {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	+ mediatek,portmap = "llllw";

	- ehci@101c0000 {
	+ port@5 {
	status = "okay";
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ phy-mode = "rgmii";
	};

	- ohci@101c1000 {
	+ mdio-bus {
	status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ reg = <0>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy1: ethernet-phy@1 {
	+ reg = <1>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy2: ethernet-phy@2 {
	+ reg = <2>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy3: ethernet-phy@3 {
	+ reg = <3>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy1f: ethernet-phy@1f {
	+ reg = <0x1f>;
	+ phy-mode = "rgmii";
	+ };
	};
	};
	+
	+&gsw {
	+ mediatek,port4 = "gmac";
	+ mediatek,mt7530 = <1>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MT7620a_MT7610e.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MT7620a_MT7610e.dts
	+++ head/sys/gnu/dts/mips/MT7620a_MT7610e.dts
	@@ -1,72 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620A evaluation board";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <1000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mediatek,portmap = "llllw";
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- };
	-
	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys";
	#address-cells = <1>;
	@@ -86,3 +25,62 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <1000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MT7620a_V22SG.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MT7620a_V22SG.dts
	+++ head/sys/gnu/dts/mips/MT7620a_V22SG.dts
	@@ -1,69 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620a V22SG High Power evaluation board";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "spi";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	- mediatek,portmap = "llllw";
	-
	- port@4 {
	- status = "okay";
	- phy-handle = <&phy4>;
	- phy-mode = "rgmii";
	- };
	-
	- port@5 {
	- status = "okay";
	- phy-handle = <&phy5>;
	- phy-mode = "rgmii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy4: ethernet-phy@4 {
	- reg = <4>;
	- phy-mode = "rgmii";
	- };
	-
	- phy5: ethernet-phy@5 {
	- reg = <5>;
	- phy-mode = "rgmii";
	- };
	- };
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "gmac";
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -112,3 +54,61 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "spi";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	+ mediatek,portmap = "llllw";
	+
	+ port@4 {
	+ status = "okay";
	+ phy-handle = <&phy4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ port@5 {
	+ status = "okay";
	+ phy-handle = <&phy5>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&gsw {
	+ mediatek,port4 = "gmac";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MT7621.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MT7621.dts
	+++ head/sys/gnu/dts/mips/MT7621.dts
	@@ -15,23 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- xhci@1E1C0000 {
	- status = "okay";
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	nand@1e003000 {
	partition@0 {
	label = "uboot";
	@@ -54,3 +37,20 @@
	};
	};
	};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&xhci {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/MT7628.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MT7628.dts
	+++ head/sys/gnu/dts/mips/MT7628.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7628an.dtsi"
	+#include "mt7628an.dtsi"

	/ {
	compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
	@@ -10,56 +10,58 @@
	device_type = "memory";
	reg = <0x0 0x2000000>;
	};
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag";
	- ralink,function = "gpio";
	- };
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag";
	+ ralink,function = "gpio";
	};
	};
	+};

	- wmac@10300000 {
	- status = "okay";
	- };
	+&wmac {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	- m25p,chunked-io = <32>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	};
	+
	+&wmac {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MZK-750DHP.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MZK-750DHP.dts
	+++ head/sys/gnu/dts/mips/MZK-750DHP.dts
	@@ -1,93 +1,28 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-soc";
	model = "Planex MZK-750DHP";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi refclk", "rgmii1";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	wps {
	label = "mzk-750dhp:green:wps";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio2 15 1>;
	};

	power {
	label = "mzk-750dhp:green:power";
	gpios = <&gpio1 15 1>;
	};
	+
	+ wlan5g {
	+ label = "mzk-750dhp:green:wlan5g";
	+ gpios = <&gpio1 14 1>;
	+ };
	};

	gpio-keys-polled {
	@@ -99,13 +34,94 @@
	s1 {
	label = "reset";
	gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ linux,code = <0x198>;
	};

	s2 {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	+ gpios = <&gpio2 19 1>;
	linux,code = <0x211>;
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/MZK-DP150N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MZK-DP150N.dts
	+++ head/sys/gnu/dts/mips/MZK-DP150N.dts
	@@ -1,81 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "MZK-DP150N", "ralink,rt5350-soc";
	model = "Planex MZK-DP150N";

	- palmbus@10000000 {
	- gpio1: gpio@660 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "uboot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "uboot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	-
	- spidev@1 {
	- compatible = "linux,spidev";
	- spi-max-frequency = <10000000>;
	- reg = <1>;
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag", "uartf", "led";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x17>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -98,3 +28,71 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "uboot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "uboot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+
	+ spidev@1 {
	+ compatible = "linux,spidev";
	+ spi-max-frequency = <10000000>;
	+ reg = <1 0>;
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "jtag", "uartf", "led";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x17>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	+};
	Index: head/sys/gnu/dts/mips/MZK-EX300NP.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MZK-EX300NP.dts
	+++ head/sys/gnu/dts/mips/MZK-EX300NP.dts
	@@ -0,0 +1,130 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+/ {
	+ compatible = "ralink,mt7620a-soc";
	+ model = "Planex MZK-EX300NP";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wifi {
	+ label = "mzk-ex300np:green:wifi";
	+ gpios = <&gpio3 0 1>;
	+ };
	+
	+ wps {
	+ label = "mzk-ex300np:green:wps";
	+ gpios = <&gpio1 5 1>;
	+ };
	+
	+ rep {
	+ label = "mzk-ex300np:blue:rep";
	+ gpios = <&gpio1 4 1>;
	+ };
	+
	+ wifi1 {
	+ label = "mzk-ex300np:blue:wifi1";
	+ gpios = <&gpio1 1 1>;
	+ };
	+
	+ wifi2 {
	+ label = "mzk-ex300np:blue:wifi2";
	+ gpios = <&gpio1 2 1>;
	+ };
	+
	+ wifi3 {
	+ label = "mzk-ex300np:blue:wifi3";
	+ gpios = <&gpio1 0 1>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 1>;
	+ linux,code = <0x198>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 3 0>;
	+ linux,code = <0x211>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x730000>;
	+ };
	+
	+ partition@780000 {
	+ label = "Udata";
	+ reg = <0x780000 0x80000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/MZK-EX750NP.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MZK-EX750NP.dts
	+++ head/sys/gnu/dts/mips/MZK-EX750NP.dts
	@@ -0,0 +1,148 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+/ {
	+ compatible = "ralink,mt7620a-soc";
	+ model = "Planex MZK-EX750NP";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "mzk-ex750np:red:power";
	+ gpios = <&gpio0 14 1>;
	+ };
	+
	+ wifi {
	+ label = "mzk-ex750np:red:wifi";
	+ gpios = <&gpio3 0 1>;
	+ };
	+
	+ wps {
	+ label = "mzk-ex750np:green:wps";
	+ gpios = <&gpio0 10 1>;
	+ };
	+
	+ rep {
	+ label = "mzk-ex750np:blue:rep";
	+ gpios = <&gpio2 16 1>;
	+ };
	+
	+ wifi1 {
	+ label = "mzk-ex750np:blue:wifi1";
	+ gpios = <&gpio2 19 1>;
	+ };
	+
	+ wifi2 {
	+ label = "mzk-ex750np:blue:wifi2";
	+ gpios = <&gpio2 18 1>;
	+ };
	+
	+ wifi3 {
	+ label = "mzk-ex750np:blue:wifi3";
	+ gpios = <&gpio2 17 1>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 9 1>;
	+ linux,code = <0x198>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 13 0>;
	+ linux,code = <0x211>;
	+ };
	+ };
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x730000>;
	+ };
	+
	+ partition@780000 {
	+ label = "Udata";
	+ reg = <0x780000 0x80000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/MZK-W300NH2.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MZK-W300NH2.dts
	+++ head/sys/gnu/dts/mips/MZK-W300NH2.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "MZK-W300NH2", "ralink,rt3052-soc";
	model = "Planex MZK-W300NH2";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -53,18 +44,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -109,3 +88,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/MZK-WDPR.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MZK-WDPR.dts
	+++ head/sys/gnu/dts/mips/MZK-WDPR.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "MZK-WDPR", "ralink,rt3052-soc";
	@@ -10,15 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -58,22 +49,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- otg@101c0000 {
	- status = "okay";
	- };
	-
	gpio-export {
	compatible = "gpio-export";

	@@ -84,3 +59,28 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/MicroWRT.dts
	===================================================================
	--- head/sys/gnu/dts/mips/MicroWRT.dts
	+++ head/sys/gnu/dts/mips/MicroWRT.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "microwrt", "ralink,mt7620a-soc";
	@@ -10,84 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x20000>;
	- read-only;
	- };
	-
	- partition@20000 {
	- label = "u-boot-env";
	- reg = <0x20000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@30000 {
	- label = "factory";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "firmware";
	- reg = <0x40000 0xfc0000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "wled", "i2c", "wdt", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -107,3 +29,79 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "u-boot-env";
	+ reg = <0x20000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@30000 {
	+ label = "factory";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0xfc0000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "wled", "i2c", "wdt", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/NA930.dts
	===================================================================
	--- head/sys/gnu/dts/mips/NA930.dts
	+++ head/sys/gnu/dts/mips/NA930.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	@@ -10,34 +10,6 @@
	bootargs = "console=ttyS1,57600";
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "rgmii2", "spi", "ephy";
	- ralink,function = "gpio";
	- };
	-
	- uartf_gpio {
	- ralink,group = "uartf";
	- ralink,function = "gpio uartf";
	- };
	- };
	- };
	-
	- palmbus@10000000 {
	- uart@500 {
	- status = "okay";
	- };
	-
	- gpio@638 {
	- status = "okay";
	- };
	-
	- gpio@660 {
	- status = "okay";
	- };
	- };
	-
	nand {
	#address-cells = <1>;
	#size-cells = <1>;
	@@ -67,39 +39,6 @@
	};
	};

	- ethernet@10100000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
	- mediatek,portmap = "llllw";
	-
	- port@4 {
	- status = "okay";
	- phy-handle = <&phy4>;
	- phy-mode = "rgmii";
	- };
	-
	- port@5 {
	- status = "okay";
	- phy-handle = <&phy5>;
	- phy-mode = "rgmii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy4: ethernet-phy@4 {
	- reg = <4>;
	- phy-mode = "rgmii";
	- };
	-
	- phy5: ethernet-phy@5 {
	- reg = <5>;
	- phy-mode = "rgmii";
	- };
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -159,16 +98,75 @@
	gpios = <&gpio0 13 0>;
	};
	};
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "rgmii2", "spi", "ephy";
	+ ralink,function = "gpio";
	+ };

	- gsw@10110000 {
	- mediatek,port4 = "gmac";
	+ uartf_gpio {
	+ ralink,group = "uartf";
	+ ralink,function = "gpio uartf";
	+ };
	+ };
	+};
	+
	+&uart {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
	+ mediatek,portmap = "llllw";
	+
	+ port@4 {
	+ status = "okay";
	+ phy-handle = <&phy4>;
	+ phy-mode = "rgmii";
	};

	- ehci@101c0000 {
	+ port@5 {
	status = "okay";
	+ phy-handle = <&phy5>;
	+ phy-mode = "rgmii";
	};

	- ohci@101c1000 {
	+ mdio-bus {
	status = "okay";
	+
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	+ };
	};
	};
	+
	+&gsw {
	+ mediatek,port4 = "gmac";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/NBG-419N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/NBG-419N.dts
	+++ head/sys/gnu/dts/mips/NBG-419N.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "NBG-419N", "ralink,rt3052-soc";
	model = "ZyXEL NBG-419N";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -92,3 +71,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/NCS601W.dts
	===================================================================
	--- head/sys/gnu/dts/mips/NCS601W.dts
	+++ head/sys/gnu/dts/mips/NCS601W.dts
	@@ -1,75 +1,73 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "NCS601W", "ralink,rt5350-soc";
	model = "Wansview NCS601W";
	+};
	+
	+&spi0 {
	+ status = "okay";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};
	- };

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};
	- };

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/NW718.dts
	===================================================================
	--- head/sys/gnu/dts/mips/NW718.dts
	+++ head/sys/gnu/dts/mips/NW718.dts
	@@ -1,70 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "NW718", "ralink,rt3050-soc";
	model = "Netcore NW718";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <25000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "config";
	- reg = <0x30000 0x20000>;
	- read-only;
	- };
	-
	- factory: partition@50000 {
	- label = "factory";
	- reg = <0x50000 0x10000>;
	- read-only;
	- };
	-
	- partition@60000 {
	- label = "firmware";
	- reg = <0x60000 0x3a0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -102,8 +43,65 @@
	linux,code = <0x211>;
	};
	};
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <25000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };

	- otg@101c0000 {
	- status = "okay";
	+ partition@30000 {
	+ label = "config";
	+ reg = <0x30000 0x20000>;
	+ read-only;
	+ };
	+
	+ factory: partition@50000 {
	+ label = "factory";
	+ reg = <0x50000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@60000 {
	+ label = "firmware";
	+ reg = <0x60000 0x3a0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/OY-0001.dts
	===================================================================
	--- head/sys/gnu/dts/mips/OY-0001.dts
	+++ head/sys/gnu/dts/mips/OY-0001.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-soc";
	@@ -10,76 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	-
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mediatek,portmap = "llllw";
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -94,22 +24,6 @@
	};
	};

	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -123,3 +37,86 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/PBR-M1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/PBR-M1.dts
	+++ head/sys/gnu/dts/mips/PBR-M1.dts
	@@ -15,55 +15,8 @@
	bootargs = "console=ttyS0,115200";
	};

	- sdhci@10130000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&sdhci_pins>;
	- };
	-
	- xhci@1E1C0000 {
	- status = "okay";
	- };
	-
	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	-
	- };
	- };
	-
	- i2c@900 {
	+ palmbus: palmbus@1E000000 {
	+ i2c: i2c@900 {
	compatible = "ralink,i2c-mt7621";
	reg = <0x900 0x100>;
	#address-cells = <1>;
	@@ -80,32 +33,6 @@
	};
	};

	- pcie@1e140000 {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	- };
	-
	- ethernet@1e100000 {
	- mtd-mac-address = <&factory 0xe000>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -175,13 +102,87 @@
	compatible = "gpio-beeper";
	gpios = <&gpio0 26 1>;
	};
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	- ralink,function = "gpio";
	- };
	+&sdhci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	+};
	+
	+&xhci {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	+
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	+ ralink,function = "gpio";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/PSG1208.dts
	===================================================================
	--- head/sys/gnu/dts/mips/PSG1208.dts
	+++ head/sys/gnu/dts/mips/PSG1208.dts
	@@ -1,90 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "PSG1208", "ralink,mt7620a-soc";
	model = "Phicomm PSG1208";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@20000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@30000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -112,3 +33,80 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@30000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/PSR-680W.dts
	===================================================================
	--- head/sys/gnu/dts/mips/PSR-680W.dts
	+++ head/sys/gnu/dts/mips/PSR-680W.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "PSR-680W", "ralink,rt3052-soc";
	@@ -10,15 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -51,18 +42,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -84,8 +63,29 @@
	linux,code = <0x198>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/PWH2004.dts
	===================================================================
	--- head/sys/gnu/dts/mips/PWH2004.dts
	+++ head/sys/gnu/dts/mips/PWH2004.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "PWH2004", "ralink,rt3052-soc";
	model = "Prolink PWH2004";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -73,12 +64,21 @@
	linux,code = <0x198>;
	};
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	};
	Index: head/sys/gnu/dts/mips/PX-4885-4M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/PX-4885-4M.dts
	+++ head/sys/gnu/dts/mips/PX-4885-4M.dts
	@@ -1,43 +1,39 @@
	/dts-v1/;

	-/include/ "PX-4885.dtsi"
	+#include "PX-4885.dtsi"

	-/ {
	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x20000>;
	- read-only;
	- };
	-
	- partition@20000 {
	- label = "devdata";
	- reg = <0x20000 0x20000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "devconf";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "devdata";
	+ reg = <0x20000 0x20000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "devconf";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	};
	};
	};
	Index: head/sys/gnu/dts/mips/PX-4885-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/PX-4885-8M.dts
	+++ head/sys/gnu/dts/mips/PX-4885-8M.dts
	@@ -1,43 +1,39 @@
	/dts-v1/;

	-/include/ "PX-4885.dtsi"
	+#include "PX-4885.dtsi"

	-/ {
	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x20000>;
	- read-only;
	- };
	-
	- partition@20000 {
	- label = "devdata";
	- reg = <0x20000 0x20000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "devconf";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "devdata";
	+ reg = <0x20000 0x20000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "devconf";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	};
	Index: head/sys/gnu/dts/mips/PX-4885.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/PX-4885.dtsi
	+++ head/sys/gnu/dts/mips/PX-4885.dtsi
	@@ -1,30 +1,9 @@
	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "PX-4885", "ralink,rt5350-soc";
	model = "7Links PX-4885";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -52,3 +31,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/RE6500.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RE6500.dts
	+++ head/sys/gnu/dts/mips/RE6500.dts
	@@ -15,79 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- pcie@1e140000 {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	- };
	-
	- ethernet@1e100000 {
	- mtd-mac-address = <&factory 0x2e>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -121,3 +48,74 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uart2", "uart3", "rgmii2";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x2e>;
	+};
	Index: head/sys/gnu/dts/mips/RP-N53.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RP-N53.dts
	+++ head/sys/gnu/dts/mips/RP-N53.dts
	@@ -1,94 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "asus,rp-n53", "ralink,mt7620a-soc";
	model = "Asus RP-N53";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- i2c@900 {
	- status = "okay";
	- };
	-
	- i2s@a00 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&pcm_i2s_pins>;
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	-
	- pcm@2000 {
	- status = "okay";
	- };
	-
	- gdma@2800 {
	- status = "okay";
	- };
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "mdio", "rgmii1";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -164,3 +81,84 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+};
	+
	+&i2s {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pcm_i2s_pins>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pcm {
	+ status = "okay";
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "mdio", "rgmii1";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/RT-G32-B1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RT-G32-B1.dts
	+++ head/sys/gnu/dts/mips/RT-G32-B1.dts
	@@ -1,70 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "RT-G32-B1", "ralink,rt3050-soc";
	model = "Asus RT-G32 B1";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "devdata";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- devconf: partition@40000 {
	- label = "devconf";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&devconf 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&devconf 0>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -84,3 +25,60 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "devdata";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ devconf: partition@40000 {
	+ label = "devconf";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&devconf 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devconf 0>;
	+};
	Index: head/sys/gnu/dts/mips/RT-N10-PLUS.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RT-N10-PLUS.dts
	+++ head/sys/gnu/dts/mips/RT-N10-PLUS.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
	@@ -38,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&devconf 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&devconf 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -78,3 +66,15 @@
	};
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&devconf 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devconf 0>;
	+};
	Index: head/sys/gnu/dts/mips/RT-N13U.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RT-N13U.dts
	+++ head/sys/gnu/dts/mips/RT-N13U.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "RT-N13U", "ralink,rt3052-soc";
	model = "Asus RT-N13U";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -79,20 +70,29 @@
	linux,code = <0x211>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/RT-N14U.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RT-N14U.dts
	+++ head/sys/gnu/dts/mips/RT-N14U.dts
	@@ -1,83 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
	model = "Asus RT-N14U";

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "i2c";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -126,3 +54,73 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "ephy", "wled", "i2c";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/RT-N15.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RT-N15.dts
	+++ head/sys/gnu/dts/mips/RT-N15.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt2880.dtsi"
	+#include "rt2880.dtsi"

	/ {
	#address-cells = <1>;
	@@ -8,21 +8,6 @@
	compatible = "RT-N15", "ralink,rt2880-soc";
	model = "Asus RT-N15";

	- palmbus@300000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartlite", "mdio";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -55,34 +40,12 @@
	};
	};

	- ethernet@400000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x4>;
	-
	- port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@0 {
	- phy-mode = "mii";
	- reg = <0>;
	- };
	- };
	- };
	-
	rtl8366s {
	compatible = "realtek,rtl8366s";
	gpio-sda = <&gpio0 1 0>;
	gpio-sck = <&gpio0 2 0>;
	};

	- wmac@480000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -111,3 +74,38 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartlite", "mdio";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x4>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ phy-mode = "mii";
	+ reg = <0>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/RT-N56U.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RT-N56U.dts
	+++ head/sys/gnu/dts/mips/RT-N56U.dts
	@@ -1,73 +1,11 @@
	/dts-v1/;

	-/include/ "rt3883.dtsi"
	+#include "rt3883.dtsi"

	/ {
	compatible = "RT-N56U", "ralink,rt3883-soc";
	model = "Asus RT-N56U";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	-
	- port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	- };
	- };
	-
	- pci@10140000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&pci_pins>;
	-
	- pci_pins: pci {
	- pci {
	- ralink,group = "pci";
	- ralink,function = "pci-fnc";
	- };
	- };
	-
	- host-bridge {
	- pci-bridge@1 {
	- status = "okay";
	-
	- wmac@0,0 {
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	- };
	- };
	- };
	- };
	-
	- wmac@10180000 {
	- status = "okay";
	- ralink,2ghz = <0>;
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	nor-flash@1c000000 {
	compatible = "cfi-flash";
	reg = <0x1c000000 0x800000>;
	@@ -149,3 +87,63 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ };
	+};
	+
	+&pci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pci_pins>;
	+
	+ pci_pins: pci {
	+ pci {
	+ ralink,group = "pci";
	+ ralink,function = "pci-fnc";
	+ };
	+ };
	+
	+ host-bridge {
	+ pci-bridge@1 {
	+ status = "okay";
	+
	+ wmac@0,0 {
	+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	+ reg = < 0x10000 0 0 0 0 >;
	+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ };
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,2ghz = <0>;
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	+++ head/sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	@@ -1,83 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "RT5350F-OLINUXINO-EVB", "ralink,rt5350-soc";
	model = "Olimex RT5350F-OLinuXino-EVB";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	-
	- gpio1: gpio@660 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio_export {
	compatible = "gpio-export";
	#size-cells = <0>;
	@@ -100,3 +28,73 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <0x17>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	+++ head/sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	@@ -1,80 +1,78 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
	model = "Olimex RT5350F-OLinuXino";
	+};
	+
	+&spi0 {
	+ status = "okay";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- gpio1: gpio@660 {
	- status = "okay";
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};
	- };

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	};
	- };

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	- };
	+&gpio1 {
	+ status = "okay";
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <0x17>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/RUT5XX.dts
	===================================================================
	--- head/sys/gnu/dts/mips/RUT5XX.dts
	+++ head/sys/gnu/dts/mips/RUT5XX.dts
	@@ -1,70 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "RUT5XX", "ralink,rt3050-soc";
	model = "Teltonika RUT5XX";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "n25q128a13";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -86,8 +27,65 @@
	linux,code = <0x198>;
	};
	};
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "n25q128a13";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/SAP-G3200U3.dts
	===================================================================
	--- head/sys/gnu/dts/mips/SAP-G3200U3.dts
	+++ head/sys/gnu/dts/mips/SAP-G3200U3.dts
	@@ -15,76 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x1000>;
	- read-only;
	- };
	-
	- partition@31000 {
	- label = "config";
	- reg = <0x31000 0xf000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pcie@1e140000 {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	- };
	-
	- ethernet@1e100000 {
	- mtd-mac-address = <&factory 0xe006>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -112,13 +42,81 @@
	linux,code = <0xf7>;
	};
	};
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x1000>;
	+ read-only;
	+ };
	+
	+ partition@31000 {
	+ label = "config";
	+ reg = <0x31000 0xf000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe006>;
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uart3", "jtag";
	- ralink,function = "gpio";
	- };
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart3", "jtag";
	+ ralink,function = "gpio";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/SK-WB8.dts
	===================================================================
	--- head/sys/gnu/dts/mips/SK-WB8.dts
	+++ head/sys/gnu/dts/mips/SK-WB8.dts
	@@ -0,0 +1,124 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+/ {
	+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ model = "SamKnows Whitebox 8";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wps {
	+ label = "sk-wb8:green:wps";
	+ gpios = <&gpio1 14 1>;
	+ };
	+
	+ usb {
	+ label = "sk-wb8:green:usb";
	+ gpios = <&gpio1 15 1>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 11 1>;
	+ linux,code = <0x211>;
	+ };
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 9 1>;
	+ linux,code = <0x198>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+
	+ partition@e30000 {
	+ label = "recovery";
	+ reg = <0xe30000 0x1d0000>;
	+ };
	+
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/SL-R7205.dts
	===================================================================
	--- head/sys/gnu/dts/mips/SL-R7205.dts
	+++ head/sys/gnu/dts/mips/SL-R7205.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "SL-R7205", "ralink,rt3052-soc";
	model = "Skyline SL-R7205 Wireless 3G Router";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -86,8 +65,29 @@
	linux,code = <0x211>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/TEW-691GR.dts
	===================================================================
	--- head/sys/gnu/dts/mips/TEW-691GR.dts
	+++ head/sys/gnu/dts/mips/TEW-691GR.dts
	@@ -1,47 +1,11 @@
	/dts-v1/;

	-/include/ "rt3883.dtsi"
	+#include "rt3883.dtsi"

	/ {
	compatible = "TEW-691GR", "ralink,rt3883-soc";
	model = "TRENDnet TEW-691GR";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	-
	- port@0 {
	- phy-handle = <&phy0>;
	- phy-mode = "rgmii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@0 {
	- reg = <0>;
	- };
	- };
	- };
	-
	- wmac@10180000 {
	- ralink,5ghz = <0>;
	- };
	-
	nor-flash@1c000000 {
	compatible = "cfi-flash";
	reg = <0x1c000000 0x800000>;
	@@ -107,3 +71,37 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+
	+ port@0 {
	+ phy-handle = <&phy0>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ reg = <0>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,5ghz = <0>;
	+};
	Index: head/sys/gnu/dts/mips/TEW-692GR.dts
	===================================================================
	--- head/sys/gnu/dts/mips/TEW-692GR.dts
	+++ head/sys/gnu/dts/mips/TEW-692GR.dts
	@@ -1,67 +1,11 @@
	/dts-v1/;

	-/include/ "rt3883.dtsi"
	+#include "rt3883.dtsi"

	/ {
	compatible = "TEW-692GR", "ralink,rt3883-soc";
	model = "TRENDnet TEW-692GR";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x28>;
	-
	- port@0 {
	- phy-handle = <&phy0>;
	- phy-mode = "rgmii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@0 {
	- reg = <0>;
	- };
	- };
	- };
	-
	- pci@10140000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&pci_pins>;
	-
	- pci_pins: pci {
	- pci {
	- ralink,group = "pci";
	- ralink,function = "pci-fnc";
	- };
	- };
	-
	- host-bridge {
	- pci-bridge@1 {
	- status = "okay";
	- };
	- };
	- };
	-
	- wmac@10180000 {
	- ralink,5ghz = <0>;
	- };
	-
	nor-flash@1c000000 {
	compatible = "cfi-flash";
	reg = <0x1c000000 0x800000>;
	@@ -126,3 +70,57 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x28>;
	+
	+ port@0 {
	+ phy-handle = <&phy0>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ reg = <0>;
	+ };
	+ };
	+};
	+
	+&pci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pci_pins>;
	+
	+ pci_pins: pci {
	+ pci {
	+ ralink,group = "pci";
	+ ralink,function = "pci-fnc";
	+ };
	+ };
	+
	+ host-bridge {
	+ pci-bridge@1 {
	+ status = "okay";
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,5ghz = <0>;
	+};
	Index: head/sys/gnu/dts/mips/TINY-AC.dts
	===================================================================
	--- head/sys/gnu/dts/mips/TINY-AC.dts
	+++ head/sys/gnu/dts/mips/TINY-AC.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "TINY-AC", "ralink,mt7620a-soc";
	@@ -10,157 +10,154 @@
	bootargs = "console=ttyS0,57600";
	};

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	+ gpio-leds {
	+ compatible = "gpio-leds";

	- gpio2: gpio@660 {
	- status = "okay";
	+ usb {
	+ label = "tiny-ac:green:usb";
	+ gpios = <&gpio0 11 1>;
	};

	- gpio3: gpio@688 {
	- status = "okay";
	+ wifi {
	+ label = "tiny-ac:orange:wifi";
	+ gpios = <&gpio3 0 1>;
	};

	- spi@b00 {
	- status = "okay";
	+ };

	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;

	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 1>;
	+ linux,code = <0x198>;
	+ };

	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	+ };

	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;

	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+ usbpower {
	+ gpio-export,name = "usbpower";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio2 5 0>;
	};
	};
	+};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&gpio0 {
	+ status = "okay";
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&gpio2 {
	+ status = "okay";
	+};

	- ethernet@10100000 {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	- mediatek,portmap = "llllw";
	+&gpio3 {
	+ status = "okay";
	+};

	- port@4 {
	- status = "okay";
	- phy-mode = "rgmii";
	- phy-handle = <&phy4>;
	- };
	+&spi0 {
	+ status = "okay";

	- port@5 {
	- status = "okay";
	- phy-mode = "rgmii";
	- phy-handle = <&phy5>;
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- mdio-bus {
	- status = "okay";
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };

	- phy4: ethernet-phy@4 {
	- reg = <4>;
	- phy-mode = "rgmii";
	- };
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- phy5: ethernet-phy@5 {
	- reg = <5>;
	- phy-mode = "rgmii";
	- };
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	+};

	- gsw@10110000 {
	- mediatek,port4 = "gmac";
	- mediatek,mt7530 = <1>;
	+&ehci {
	+ status = "okay";
	+};

	- };
	+&ohci {
	+ status = "okay";
	+};

	- wmac@10180000 {
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	- };
	+&ethernet {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	+ mediatek,portmap = "llllw";

	- pcie@10140000 {
	+ port@4 {
	status = "okay";
	+ phy-mode = "rgmii";
	+ phy-handle = <&phy4>;
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uartf", "nd_sd", "wled";
	- ralink,function = "gpio";
	- };
	- };
	+ port@5 {
	+ status = "okay";
	+ phy-mode = "rgmii";
	+ phy-handle = <&phy5>;
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	+ mdio-bus {
	+ status = "okay";

	- usb {
	- label = "tiny-ac:green:usb";
	- gpios = <&gpio0 11 1>;
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	};

	- wifi {
	- label = "tiny-ac:orange:wifi";
	- gpios = <&gpio3 0 1>;
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	};
	-
	};
	+};

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	- };
	+&gsw {
	+ mediatek,port4 = "gmac";
	+ mediatek,mt7530 = <1>;
	+};

	- };
	+&wmac {
	+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+};

	- gpio_export {
	- compatible = "gpio-export";
	- #size-cells = <0>;
	+&pcie {
	+ status = "okay";
	+};

	- usbpower {
	- gpio-export,name = "usbpower";
	- gpio-export,output = <1>;
	- gpios = <&gpio2 5 0>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uartf", "nd_sd", "wled";
	+ ralink,function = "gpio";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/UBNT-ERX.dts
	===================================================================
	--- head/sys/gnu/dts/mips/UBNT-ERX.dts
	+++ head/sys/gnu/dts/mips/UBNT-ERX.dts
	@@ -17,30 +17,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- palmbus@1E000000 {
	- spi@b00 {
	- /* This board has 2Mb spi flash soldered in and visible
	- from manufacturer's firmware.
	- But this SoC shares spi and nand pins,
	- and current driver does't handle this sharing well */
	- status = "disabled";
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <1>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "spi";
	- reg = <0x0 0x200000>;
	- read-only;
	- };
	- };
	- };
	- };
	-
	nand@1e003000 {
	status = "okay";

	@@ -78,27 +54,6 @@

	};

	- ethernet@1e100000 {
	- mtd-mac-address = <&factory 0x22>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- sdhci@1E130000 {
	- status = "disabled";
	- };
	-
	- pcie@1e140000 {
	- status = "disabled";
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -112,3 +67,46 @@
	};
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x22>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "disabled";
	+};
	+
	+&pcie {
	+ status = "disabled";
	+};
	+
	+&spi0 {
	+ /* This board has 2Mb spi flash soldered in and visible
	+ from manufacturer's firmware.
	+ But this SoC shares spi and nand pins,
	+ and current driver does't handle this sharing well */
	+ status = "disabled";
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <1>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "spi";
	+ reg = <0x0 0x200000>;
	+ read-only;
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/UR-326N4G.dts
	===================================================================
	--- head/sys/gnu/dts/mips/UR-326N4G.dts
	+++ head/sys/gnu/dts/mips/UR-326N4G.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "UR-326N4G", "ralink,rt3052-soc";
	model = "UPVEL UR-326N4G";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4004>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -106,8 +85,29 @@
	linux,code = <0x32>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4004>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/UR-336UN.dts
	===================================================================
	--- head/sys/gnu/dts/mips/UR-336UN.dts
	+++ head/sys/gnu/dts/mips/UR-336UN.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "UR-336UN", "ralink,rt3052-soc";
	model = "UPVEL UR-336UN";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -24,20 +15,6 @@
	#size-cells = <1>;
	};

	- /* FIXME: no partitions defined */
	-/* ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4004>;
	- };
	-*/
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- /* FIXME: no partitions defined */
	-/* wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-*/
	gpio-leds {
	compatible = "gpio-leds";

	@@ -85,8 +62,31 @@
	linux,code = <0x32>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+/* FIXME: no partitions defined */
	+/*&ethernet {
	+ mtd-mac-address = <&factory 0x4004>;
	+};
	+*/
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+/* FIXME: no partitions defined */
	+/*&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+*/
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/V11STFE.dts
	===================================================================
	--- head/sys/gnu/dts/mips/V11STFE.dts
	+++ head/sys/gnu/dts/mips/V11STFE.dts
	@@ -1,26 +1,12 @@
	/dts-v1/;

	-/include/ "rt2880.dtsi"
	+#include "rt2880.dtsi"

	/ {
	compatible = "V11ST-FE", "ralink,rt2880-soc";
	model = "Ralink V11ST-FE";

	- palmbus@300000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	- };
	-
	- ethernet@400000 {
	- status = "okay";
	- };
	-
	- wmac@480000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pci@10140000 {
	+ pci@440000 {
	status = "okay";

	host-bridge {
	@@ -83,3 +69,15 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ status = "okay";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/V22RW-2X2.dts
	===================================================================
	--- head/sys/gnu/dts/mips/V22RW-2X2.dts
	+++ head/sys/gnu/dts/mips/V22RW-2X2.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "V22RW-2X2", "ralink,rt3052-soc";
	model = "Ralink AP-RT3052-V22RW-2X2";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,14 +38,6 @@
	};
	};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -87,8 +70,25 @@
	linux,code = <0x211>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/VOCORE-16M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/VOCORE-16M.dts
	+++ head/sys/gnu/dts/mips/VOCORE-16M.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "VOCORE.dtsi"
	+#include "VOCORE.dtsi"

	&spi0 {
	status = "okay";
	@@ -9,7 +9,7 @@
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	- reg = <0>;
	+ reg = <0 0>;
	linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	Index: head/sys/gnu/dts/mips/VOCORE-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/VOCORE-8M.dts
	+++ head/sys/gnu/dts/mips/VOCORE-8M.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "VOCORE.dtsi"
	+#include "VOCORE.dtsi"

	&spi0 {
	status = "okay";
	@@ -9,7 +9,7 @@
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	- reg = <0>;
	+ reg = <0 0>;
	linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	Index: head/sys/gnu/dts/mips/VOCORE.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/VOCORE.dtsi
	+++ head/sys/gnu/dts/mips/VOCORE.dtsi
	@@ -1,48 +1,9 @@
	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "VoCore", "ralink,rt5350-soc";
	model = "VoCore";

	- palmbus@10000000 {
	- gpio1: gpio@660 {
	- status = "okay";
	- };
	-
	- i2c@900 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag", "uartf", "led";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x17>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-export {
	compatible = "gpio-export";
	#size-cells = <0>;
	@@ -186,6 +147,44 @@
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default {
	+ gpio {
	+ ralink,group = "jtag", "uartf", "led";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x11>;
	+ mediatek,portdisable = <0x2e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	&spi1 {
	status = "okay";

	Index: head/sys/gnu/dts/mips/W150M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/W150M.dts
	+++ head/sys/gnu/dts/mips/W150M.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "W150M", "ralink,rt3050-soc";
	model = "Tenda W150M";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -99,16 +90,25 @@
	linux,code = <0x100>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	};
	Index: head/sys/gnu/dts/mips/W306R_V20.dts
	===================================================================
	--- head/sys/gnu/dts/mips/W306R_V20.dts
	+++ head/sys/gnu/dts/mips/W306R_V20.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "W306R_V20", "ralink,rt3052-soc";
	@@ -38,27 +38,6 @@
	};
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -86,3 +65,24 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/W502U.dts
	===================================================================
	--- head/sys/gnu/dts/mips/W502U.dts
	+++ head/sys/gnu/dts/mips/W502U.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "W502U", "ralink,rt3052-soc";
	@@ -10,15 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -51,18 +42,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -95,8 +74,29 @@
	linux,code = <0x211>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WCR150GN.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WCR150GN.dts
	+++ head/sys/gnu/dts/mips/WCR150GN.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WCR150GN", "ralink,rt3050-soc";
	model = "Sparklan WCR-150GN";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -79,20 +70,29 @@
	linux,code = <0x198>;
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};

	- otg@101c0000 {
	- status = "okay";
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/WF-2881.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WF-2881.dts
	+++ head/sys/gnu/dts/mips/WF-2881.dts
	@@ -11,12 +11,6 @@
	reg = <0x0 0x8000000>;
	};

	- palmbus@1E000000 {
	- spi@b00 {
	- status="disabled";
	- };
	- };
	-
	chosen {
	bootargs = "console=ttyS0,57600";
	};
	@@ -54,32 +48,6 @@
	};
	};

	- pcie@1e140000 {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	- };
	-
	- ethernet@1e100000 {
	- mtd-mac-address = <&factory 0xe006>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -106,13 +74,43 @@
	linux,code = <0x198>;
	};
	};
	+};
	+
	+&spi0 {
	+ status="disabled";
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe006>;
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uart3", "jtag";
	- ralink,function = "gpio";
	- };
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart3", "jtag";
	+ ralink,function = "gpio";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/WHR-1166D.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WHR-1166D.dts
	+++ head/sys/gnu/dts/mips/WHR-1166D.dts
	@@ -1,103 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-soc";
	model = "Buffalo WHR-1166D";

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
	-
	- port@5 {
	- status = "okay";
	- phy-handle = <&phy5>;
	- phy-mode = "rgmii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy5: ethernet-phy@5 {
	- reg = <5>;
	- phy-mode = "rgmii";
	- };
	- };
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 32768>;
	- mediatek,2ghz = <0>;
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -170,3 +78,93 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
	+
	+ port@5 {
	+ status = "okay";
	+ phy-handle = <&phy5>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 32768>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WHR-300HP2.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WHR-300HP2.dts
	+++ head/sys/gnu/dts/mips/WHR-300HP2.dts
	@@ -1,81 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-soc";
	model = "Buffalo WHR-300HP2";

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mediatek,portmap = "llllw";
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -148,3 +78,71 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+
	+ pa {
	+ ralink,group = "pa";
	+ ralink,function = "pa";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/WHR-600D.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WHR-600D.dts
	+++ head/sys/gnu/dts/mips/WHR-600D.dts
	@@ -1,81 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ralink,mt7620a-soc";
	model = "Buffalo WHR-600D";

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	- gsw@10110000 {
	- mediatek,port4 = "ephy";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -148,3 +78,71 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l6405d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WHR-G300N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WHR-G300N.dts
	+++ head/sys/gnu/dts/mips/WHR-G300N.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WHR-G300N", "ralink,rt3052-soc";
	model = "Buffalo WHR-G300N";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -24,15 +15,6 @@
	#size-cells = <1>;
	};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- /* FIXME: no partitions defined */
	-/* wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-*/
	gpio-leds {
	compatible = "gpio-leds";

	@@ -83,3 +65,22 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+/* FIXME: no partitions defined */
	+/*&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+*/
	Index: head/sys/gnu/dts/mips/WITI.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WITI.dts
	+++ head/sys/gnu/dts/mips/WITI.dts
	@@ -15,50 +15,7 @@
	bootargs = "console=ttyS0,57600";
	};

	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- xhci@1E1C0000 {
	- status = "okay";
	- };
	-
	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	-
	+ palmbus: palmbus@1E000000 {
	i2c@900 {
	compatible = "ralink,i2c-mt7621";
	reg = <0x900 0x100>;
	@@ -76,34 +33,6 @@
	};
	};

	- pcie@1e140000 {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- mtd-mac-address = <&factory 0xe000>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- mtd-mac-address = <&factory 0xe000>;
	- };
	- };
	- };
	-
	- ethernet@1e100000 {
	- mtd-mac-address = <&factory 0xe000>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -116,13 +45,85 @@
	linux,code = <0x198>;
	};
	};
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	- ralink,function = "gpio";
	- };
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&xhci {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ mtd-mac-address = <&factory 0xe000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	+ mtd-mac-address = <&factory 0xe000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	+ ralink,function = "gpio";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/WIZARD8800.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WIZARD8800.dts
	+++ head/sys/gnu/dts/mips/WIZARD8800.dts
	@@ -1,83 +1,81 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "WIZARD8800", "ralink,rt5350-soc";
	model = "EASYACC WI-STOR WIZARD 8800";
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};

	- palmbus@10000000 {
	- gpio1@638 {
	- status = "okay";
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q32";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- gpio2@660 {
	- status = "okay";
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};

	- spi@b00 {
	- status = "okay";
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q32";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&ehci {
	+ status = "okay";
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&ohci {
	+ status = "okay";
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	};
	Index: head/sys/gnu/dts/mips/WIZFI630A.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WIZFI630A.dts
	+++ head/sys/gnu/dts/mips/WIZFI630A.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "wizfi630a", "ralink,rt5350-soc";
	@@ -10,116 +10,6 @@
	bootargs = "console=ttyS1,115200";
	};

	- palmbus@10000000 {
	- gpio1: gpio@660 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "uboot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "uboot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	-
	- uart@500 {
	- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	- reg = <0x500 0x100>;
	- resets = <&rstctrl 12>;
	- reset-names = "uart";
	- interrupt-parent = <&intc>;
	- interrupts = <5>;
	- reg-shift = <2>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&uartf_pins>;
	- status = "okay";
	- };
	-
	- uartlite@c00 {
	- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	- reg = <0xc00 0x100>;
	- resets = <&rstctrl 19>;
	- reset-names = "uartl";
	- interrupt-parent = <&intc>;
	- interrupts = <12>;
	- reg-shift = <2>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&uartlite_pins>;
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag" ;
	- ralink,function = "gpio";
	- };
	- };
	-
	- uartf_gpio_pins: uartf_gpio {
	- uartf_gpio {
	- ralink,group = "uartf";
	- ralink,function = "uartf";
	- };
	- };
	-
	- uartlite_pins: uartlite {
	- uart {
	- ralink,group = "uartlite";
	- ralink,function = "uartlite";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x17>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-export {
	compatible = "gpio-export";
	#size-cells = <0>;
	@@ -180,3 +70,115 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ #size-cells = <1>;
	+ label = "uboot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ #size-cells = <1>;
	+ label = "uboot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ #size-cells = <1>;
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ #size-cells = <1>;
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&uart {
	+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	+ reg = <0x500 0x100>;
	+ resets = <&rstctrl 12>;
	+ reset-names = "uart";
	+ interrupt-parent = <&intc>;
	+ interrupts = <5>;
	+ reg-shift = <2>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&uartf_pins>;
	+ status = "okay";
	+};
	+
	+&uartlite {
	+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	+ reg = <0xc00 0x100>;
	+ resets = <&rstctrl 19>;
	+ reset-names = "uartl";
	+ interrupt-parent = <&intc>;
	+ interrupts = <12>;
	+ reg-shift = <2>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&uartlite_pins>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag" ;
	+ ralink,function = "gpio";
	+ };
	+ };
	+
	+ uartf_gpio_pins: uartf_gpio {
	+ uartf_gpio {
	+ ralink,group = "uartf";
	+ ralink,function = "uartf";
	+ };
	+ };
	+
	+ uartlite_pins: uartlite {
	+ uart {
	+ ralink,group = "uartlite";
	+ ralink,function = "uartlite";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x17>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WL-330N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WL-330N.dts
	+++ head/sys/gnu/dts/mips/WL-330N.dts
	@@ -1,70 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WL-330N", "ralink,rt3050-soc";
	model = "Asus WL-330N";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -98,3 +39,60 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/WL-330N3G.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WL-330N3G.dts
	+++ head/sys/gnu/dts/mips/WL-330N3G.dts
	@@ -1,70 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WL-330N3G", "ralink,rt3050-soc";
	model = "Asus WL-330N3G";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -102,8 +43,65 @@
	linux,code = <0x198>;
	};
	};
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };

	- otg@101c0000 {
	- status = "okay";
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WL-341V3.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WL-341V3.dts
	+++ head/sys/gnu/dts/mips/WL-341V3.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WL-341V3", "ralink,rt3052-soc";
	@@ -38,27 +38,6 @@
	};
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&boardnvram 0xffa0>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&boardnvram 0xfd70>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -116,8 +95,29 @@
	linux,code = <0x211>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&boardnvram 0xffa0>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&boardnvram 0xfd70>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WL-351.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WL-351.dts
	+++ head/sys/gnu/dts/mips/WL-351.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WL-351", "ralink,rt3052-soc";
	model = "Sitecom WL-351 v1 002";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,30 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3f>;
	- ralink,fct2 = <0x0002500c>;
	- /*
	- * ext phy base addr 31, rx/tx clock skew 0,
	- * turbo mii off, rgmi 3.3v off, port 5 polling off
	- * port5: enabled, gige, full-duplex, rx/tx-flow-control
	- * port6: enabled, gige, full-duplex, rx/tx-flow-control
	- */
	- ralink,fpa2 = <0x1f003fff>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- otg@101c0000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -115,3 +82,36 @@
	gpio-sck = <&gpio0 2 0>;
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+ ralink,fct2 = <0x0002500c>;
	+ /*
	+ * ext phy base addr 31, rx/tx clock skew 0,
	+ * turbo mii off, rgmi 3.3v off, port 5 polling off
	+ * port5: enabled, gige, full-duplex, rx/tx-flow-control
	+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
	+ */
	+ ralink,fpa2 = <0x1f003fff>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	+++ head/sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt2880.dtsi"
	+#include "rt2880.dtsi"

	/ {
	#address-cells = <1>;
	@@ -8,12 +8,6 @@
	compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
	model = "Buffalo WLI-TX4-AG300N";

	- palmbus@300000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -46,19 +40,6 @@
	};
	};

	- ethernet@400000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x4>;
	-
	- port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	- };
	- };
	-
	- wmac@480000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -103,3 +84,20 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x4>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/WMR-300.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WMR-300.dts
	+++ head/sys/gnu/dts/mips/WMR-300.dts
	@@ -1,71 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
	model = "Buffalo WMR-300";

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "i2c", "ephy";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -104,3 +44,61 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "ephy";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WNCE2001.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WNCE2001.dts
	+++ head/sys/gnu/dts/mips/WNCE2001.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WNCE2001", "ralink,rt3052-soc";
	@@ -10,78 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- factory: partition@30000 {
	- label = "factory";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "config";
	- reg = <0x40000 0x20000>;
	- read-only;
	- };
	-
	- partition@60000 {
	- label = "language";
	- reg = <0x60000 0x30000>;
	- read-only;
	- };
	-
	- partition@90000 {
	- label = "pot";
	- reg = <0x90000 0x10000>;
	- read-only;
	- };
	-
	- partition@a0000 {
	- label = "checksum";
	- reg = <0xa0000 0x10000>;
	- };
	-
	- partition@b0000 {
	- label = "firmware";
	- reg = <0xb0000 0x350000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -137,3 +65,73 @@
	};
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l3205d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ factory: partition@30000 {
	+ label = "factory";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "config";
	+ reg = <0x40000 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@60000 {
	+ label = "language";
	+ reg = <0x60000 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@90000 {
	+ label = "pot";
	+ reg = <0x90000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@a0000 {
	+ label = "checksum";
	+ reg = <0xa0000 0x10000>;
	+ };
	+
	+ partition@b0000 {
	+ label = "firmware";
	+ reg = <0xb0000 0x350000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/WNDR3700V5.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WNDR3700V5.dts
	+++ head/sys/gnu/dts/mips/WNDR3700V5.dts
	@@ -0,0 +1,137 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+/ {
	+ compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
	+ model = "Netgear WNDR3700v5";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600 maxcpus=2";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wps {
	+ label = "wndr3700v5:green:wps";
	+ gpios = <&gpio0 12 1>;
	+ };
	+
	+ power {
	+ label = "wndr3700v5:green:power";
	+ gpios = <&gpio0 18 1>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wndr3700v5:wps";
	+ gpios = <&gpio0 7 0>;
	+ linux,code = <0x211>;
	+ };
	+
	+ wifi {
	+ label = "wndr3700v5:wifi";
	+ gpios = <&gpio0 8 0>;
	+ linux,code = <0xf7>;
	+ };
	+
	+ reset {
	+ label = "wndr3700v5:reset";
	+ gpios = <&gpio0 14 0>;
	+ linux,code = <0x198>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usbpower {
	+ gpio-export,name = "usbpower";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 10 1>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "mx25l12805d";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@f30000 {
	+ label = "factory";
	+ reg = <0xf30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0004>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie2 {
	+ mt76@2,0 {
	+ reg = <0x1000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8004>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x0000000c>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "rgmii2", "mdio", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WR512-3GN-4M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WR512-3GN-4M.dts
	+++ head/sys/gnu/dts/mips/WR512-3GN-4M.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WR512-3GN", "ralink,rt3052-soc";
	model = "WR512-3GN-like router";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,14 +38,6 @@
	};
	};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -102,8 +85,25 @@
	linux,code = <0x32>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WR512-3GN-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WR512-3GN-8M.dts
	+++ head/sys/gnu/dts/mips/WR512-3GN-8M.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WR512-3GN", "ralink,rt3052-soc";
	model = "WR512-3GN-like router";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,14 +38,6 @@
	};
	};

	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -102,8 +85,25 @@
	linux,code = <0x32>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WR6202.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WR6202.dts
	+++ head/sys/gnu/dts/mips/WR6202.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "WR6202", "ralink,rt3052-soc";
	@@ -10,15 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -84,22 +75,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- otg@101c0000 {
	- status = "okay";
	- };
	-
	gpio_export {
	compatible = "gpio-export";
	#size-cells = <0>;
	@@ -111,3 +86,28 @@
	};
	};
	};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WRH-300CR.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WRH-300CR.dts
	+++ head/sys/gnu/dts/mips/WRH-300CR.dts
	@@ -0,0 +1,125 @@
	+/dts-v1/;
	+
	+#include "mt7620n.dtsi"
	+
	+/ {
	+ compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc";
	+ model = "ELECOM WRH-300CR";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wps {
	+ label = "wrh-300cr:green:wps";
	+ gpios = <&gpio2 0 1>;
	+ };
	+
	+ ethernet {
	+ label = "wrh-300cr:green:ethernet";
	+ gpios = <&gpio2 3 1>;
	+ };
	+
	+ wlan {
	+ label = "wrh-300cr:green:wlan";
	+ gpios = <&gpio3 0 1>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 1>;
	+ linux,code = <0x198>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 1>;
	+ linux,code = <0x211>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "mx25l12805d";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "recover";
	+ reg = <0x50000 0x1c0000>;
	+ read-only;
	+ };
	+
	+ partition@210000 {
	+ label = "firmware";
	+ reg = <0x210000 0xdf0000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x2e>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "ephy", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WRTNODE.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WRTNODE.dts
	+++ head/sys/gnu/dts/mips/WRTNODE.dts
	@@ -1,93 +1,91 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "wrtnode", "ralink,mt7620n-soc";
	model = "WRTNODE";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ indicator {
	+ label = "wrtnode:blue:indicator";
	+ gpios = <&gpio1 14 1>;
	};
	};
	+};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&gpio1 {
	+ status = "okay";
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&gpio2 {
	+ status = "okay";
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	+&gpio3 {
	+ status = "okay";
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&spi0 {
	+ status = "okay";

	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
	- ralink,function = "gpio";
	- };
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	};
	};
	+};

	- gpio-leds {
	- compatible = "gpio-leds";
	+&ehci {
	+ status = "okay";
	+};

	- indicator {
	- label = "wrtnode:blue:indicator";
	- gpios = <&gpio1 14 1>;
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
	+ ralink,function = "gpio";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/WRTNODE2.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/WRTNODE2.dtsi
	+++ head/sys/gnu/dts/mips/WRTNODE2.dtsi
	@@ -1,93 +1,90 @@
	-/include/ "mt7628an.dtsi"
	+#include "mt7628an.dtsi"

	/ {
	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- spi-max-frequency = <10000000>;
	- m25p,chunked-io = <32>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	-
	-
	- spidev@1 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "spidev";
	- reg = <1 0>;
	- linux,modalias = "spidev", "spidev";
	- spi-max-frequency = <10000000>;
	- };
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 5 1>;
	+ linux,code = <0x198>;
	};
	+ };
	+};

	- uart1@d00 {
	- status = "okay";
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- i2c@900 {
	- status = "okay";
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};

	- };
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- ralink,port-map = "llllw";
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x1fb0000>;
	+ };
	};

	- sdhci@10130000 {
	- status = "okay";
	+ spidev@1 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "spidev";
	+ reg = <1 0>;
	+ linux,modalias = "spidev", "spidev";
	+ spi-max-frequency = <10000000>;
	};
	+};

	- pcie@10140000 {
	- status = "okay";
	- };
	+&uart1 {
	+ status = "okay";
	+};

	+&i2c {
	+ status = "okay";
	+};

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ ralink,port-map = "llllw";
	+};

	- reset {
	- label = "reset";
	- gpios = <&gpio0 5 1>;
	- linux,code = <0x198>;
	- };
	- };
	+&sdhci {
	+ status = "okay";
	+};

	+&pcie {
	+ status = "okay";
	};

	+&wmac {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/WRTNODE2P.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WRTNODE2P.dts
	+++ head/sys/gnu/dts/mips/WRTNODE2P.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "WRTNODE2.dtsi"
	+#include "WRTNODE2.dtsi"

	/ {
	compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc";
	model = "WRTnode2P";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "gpio", "jtag";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -25,3 +16,11 @@
	};
	};

	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "gpio", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WRTNODE2R.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WRTNODE2R.dts
	+++ head/sys/gnu/dts/mips/WRTNODE2R.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "WRTNODE2.dtsi"
	+#include "WRTNODE2.dtsi"

	/ {
	compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc";
	model = "WRTnode2R";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "gpio", "wled_an";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -25,3 +16,11 @@
	};
	};

	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "gpio", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WSR-1166.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WSR-1166.dts
	+++ head/sys/gnu/dts/mips/WSR-1166.dts
	@@ -15,58 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xf90000>;
	- };
	-
	- partition@fe0000 {
	- label = "board_data";
	- reg = <0xfe0000 0x20000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -161,26 +109,76 @@
	compatible = "gpio-poweroff";
	gpios = <&gpio0 0 1>;
	};
	+};
	+
	+&spi0 {
	+ status = "okay";

	- pcie@1e140000 {
	- status = "okay";
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf90000>;
	+ };
	+
	+ partition@fe0000 {
	+ label = "board_data";
	+ reg = <0xfe0000 0x20000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };

	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	};
	};
	};
	Index: head/sys/gnu/dts/mips/WSR-600.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WSR-600.dts
	+++ head/sys/gnu/dts/mips/WSR-600.dts
	@@ -15,53 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -157,3 +110,48 @@
	gpios = <&gpio1 11 1>;
	};
	};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WT1520-4M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WT1520-4M.dts
	+++ head/sys/gnu/dts/mips/WT1520-4M.dts
	@@ -1,43 +1,39 @@
	/dts-v1/;

	-/include/ "WT1520.dtsi"
	+#include "WT1520.dtsi"

	-/ {
	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	};
	};
	};
	Index: head/sys/gnu/dts/mips/WT1520-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WT1520-8M.dts
	+++ head/sys/gnu/dts/mips/WT1520-8M.dts
	@@ -1,43 +1,39 @@
	/dts-v1/;

	-/include/ "WT1520.dtsi"
	+#include "WT1520.dtsi"

	-/ {
	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "s25fl064k";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	};
	Index: head/sys/gnu/dts/mips/WT1520.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/WT1520.dtsi
	+++ head/sys/gnu/dts/mips/WT1520.dtsi
	@@ -1,4 +1,4 @@
	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "NEXXWT1520", "ralink,rt5350-soc";
	@@ -12,37 +12,35 @@
	chosen {
	bootargs = "console=ttyS1,57600";
	};
	+};

	- palmbus@10000000 {
	- uart@500 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&uartf_pins>;
	- status = "okay";
	- };
	- };
	+&uart {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&uartf_pins>;
	+ status = "okay";
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag";
	- ralink,function = "gpio";
	- };
	+&pinctrl {
	+ state_default {
	+ gpio {
	+ ralink,group = "jtag";
	+ ralink,function = "gpio";
	};
	};
	+};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&ehci {
	+ status = "okay";
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&ohci {
	+ status = "okay";
	};
	Index: head/sys/gnu/dts/mips/WT3020-4M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WT3020-4M.dts
	+++ head/sys/gnu/dts/mips/WT3020-4M.dts
	@@ -1,83 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "wt3020", "ralink,mt7620n-soc";
	model = "Nexx WT3020";

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q32";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -100,3 +28,73 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q32";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WT3020-8M.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WT3020-8M.dts
	+++ head/sys/gnu/dts/mips/WT3020-8M.dts
	@@ -1,83 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "wt3020", "ralink,mt7620n-soc";
	model = "Nexx WT3020";

	- palmbus@10000000 {
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -100,3 +28,73 @@
	};
	};
	};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/WZR-AGL300NH.dts
	===================================================================
	--- head/sys/gnu/dts/mips/WZR-AGL300NH.dts
	+++ head/sys/gnu/dts/mips/WZR-AGL300NH.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "rt2880.dtsi"
	+#include "rt2880.dtsi"

	/ {
	#address-cells = <1>;
	@@ -8,19 +8,12 @@
	compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
	model = "Buffalo WZR-AGL300NH";

	- palmbus@300000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartlite", "mdio";
	- ralink,function = "gpio";
	- };
	- };
	+ pci@440000 {
	+ compatible = "ralink,rt288x-pci";
	+ reg = <0x00440000 0x20000>;
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ status = "ok";
	};

	cfi@1f000000 {
	@@ -55,34 +48,12 @@
	};
	};

	- ethernet@400000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x4>;
	-
	- port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy0: ethernet-phy@0 {
	- phy-mode = "mii";
	- reg = <0>;
	- };
	- };
	- };
	-
	rtl8366s {
	compatible = "realtek,rtl8366s";
	gpio-sda = <&gpio0 1 0>;
	gpio-sck = <&gpio0 2 0>;
	};

	- wmac@480000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -131,13 +102,39 @@
	gpios = <&gpio0 13 1>;
	};
	};
	+};

	+&gpio0 {
	+ status = "okay";
	+};

	- pcibus0: pci@00440000 {
	- compatible = "ralink,rt288x-pci";
	- reg = <0x00440000 0x20000>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	- status = "ok";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartlite", "mdio";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x4>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ phy-mode = "mii";
	+ reg = <0>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: head/sys/gnu/dts/mips/X5.dts
	===================================================================
	--- head/sys/gnu/dts/mips/X5.dts
	+++ head/sys/gnu/dts/mips/X5.dts
	@@ -1,67 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "X5", "ralink,rt5350-soc";
	model = "Poray X5";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "gd25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -122,17 +66,71 @@
	gpios = <&gpio0 18 0>;
	};
	};
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	- };
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "gd25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };

	- ehci@101c0000 {
	- status = "okay";
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};
	+};

	- ohci@101c1000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <1>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/X8.dts
	===================================================================
	--- head/sys/gnu/dts/mips/X8.dts
	+++ head/sys/gnu/dts/mips/X8.dts
	@@ -1,67 +1,11 @@
	/dts-v1/;

	-/include/ "rt5350.dtsi"
	+#include "rt5350.dtsi"

	/ {
	compatible = "X8", "ralink,rt5350-soc";
	model = "Poray X8";

	- palmbus@10000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "gd25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -83,17 +27,71 @@
	linux,code = <0x198>;
	};
	};
	+};

	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	- };
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "gd25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };

	- ehci@101c0000 {
	- status = "okay";
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};
	+};

	- ohci@101c1000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <1>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/XDXRN502J.dts
	===================================================================
	--- head/sys/gnu/dts/mips/XDXRN502J.dts
	+++ head/sys/gnu/dts/mips/XDXRN502J.dts
	@@ -1,20 +1,11 @@
	/dts-v1/;

	-/include/ "rt3050.dtsi"
	+#include "rt3050.dtsi"

	/ {
	compatible = "XDXRN502J", "ralink,rt3052-soc";
	model = "XDX RN502J";

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	cfi@1f000000 {
	compatible = "cfi-flash";
	reg = <0x1f000000 0x800000>;
	@@ -47,18 +38,6 @@
	};
	};

	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x28>;
	- };
	-
	- esw@10110000 {
	- mediatek,portmap = <0x3e>;
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -85,8 +64,29 @@
	linux,code = <0x198>;
	};
	};
	+};

	- otg@101c0000 {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	};
	};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/Y1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/Y1.dts
	+++ head/sys/gnu/dts/mips/Y1.dts
	@@ -1,18 +1,11 @@
	/dts-v1/;

	-/include/ "Y1.dtsi"
	+#include "Y1.dtsi"

	/ {
	compatible = "lenovo,Y1", "ralink,mt7620a-soc";
	model = "Lenovo Y1";

	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -47,3 +40,10 @@
	};
	};
	};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	Index: head/sys/gnu/dts/mips/Y1.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/Y1.dtsi
	+++ head/sys/gnu/dts/mips/Y1.dtsi
	@@ -1,109 +1,107 @@
	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	chosen {
	bootargs = "console=ttyS0,115200";
	};
	-
	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q128";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 11 1>;
	+ linux,code = <0x198>;
	};
	};
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};

	- ehci@101c0000 {
	- status = "okay";
	- };
	+&gpio2 {
	+ status = "okay";
	+};

	- ohci@101c1000 {
	- status = "okay";
	- };
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";

	- pcie@10140000 {
	- status = "okay";
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q128";
	+ spi-max-frequency = <10000000>;

	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	};
	};
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uartf", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	};
	};
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	+&pinctrl {
	+ state_default {
	+ gpio {
	+ ralink,group = "uartf", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };

	- reset {
	- label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ pa {
	+ ralink,group = "pa";
	+ ralink,function = "pa";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/Y1S.dts
	===================================================================
	--- head/sys/gnu/dts/mips/Y1S.dts
	+++ head/sys/gnu/dts/mips/Y1S.dts
	@@ -1,45 +1,11 @@
	/dts-v1/;

	-/include/ "Y1.dtsi"
	+#include "Y1.dtsi"

	/ {
	compatible = "lenovo,Y1S", "ralink,mt7620a-soc";
	model = "Lenovo Y1S";

	- ethernet@10100000 {
	- status = "okay";
	- mtd-mac-address = <&factory 0x4>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	- mediatek,portmap = "wllll";
	-
	- port@4 {
	- status = "okay";
	- phy-handle = <&phy4>;
	- phy-mode = "rgmii";
	- };
	-
	- port@5 {
	- status = "okay";
	- phy-handle = <&phy5>;
	- phy-mode = "rgmii";
	- };
	-
	- mdio-bus {
	- status = "okay";
	-
	- phy4: ethernet-phy@4 {
	- reg = <4>;
	- phy-mode = "rgmii";
	- };
	-
	- phy5: ethernet-phy@5 {
	- reg = <5>;
	- phy-mode = "rgmii";
	- };
	- };
	- };
	-
	gpio_export {
	compatible = "gpio-export";
	#size-cells = <0>;
	@@ -61,10 +27,6 @@
	};
	};

	- gsw@10110000 {
	- mediatek,port4 = "gmac";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -104,3 +66,41 @@
	};
	};
	};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x4>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
	+ mediatek,portmap = "wllll";
	+
	+ port@4 {
	+ status = "okay";
	+ phy-handle = <&phy4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ port@5 {
	+ status = "okay";
	+ phy-handle = <&phy5>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&gsw {
	+ mediatek,port4 = "gmac";
	+};
	Index: head/sys/gnu/dts/mips/YOUKU-YK1.dts
	===================================================================
	--- head/sys/gnu/dts/mips/YOUKU-YK1.dts
	+++ head/sys/gnu/dts/mips/YOUKU-YK1.dts
	@@ -1,98 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "YOUKU-YK1", "ralink,mt7620a-soc";
	model = "YOUKU YK1";

	- palmbus@10000000 {
	-
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "w25q256";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- sdhci@b0130000 {
	- status = "okay";
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";
	wan {
	@@ -125,3 +38,87 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "w25q256";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x1fb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/ZBT-WA05.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ZBT-WA05.dts
	+++ head/sys/gnu/dts/mips/ZBT-WA05.dts
	@@ -1,6 +1,6 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
	@@ -10,82 +10,6 @@
	bootargs = "console=ttyS0,115200";
	};

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio2: gpio@660 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- en25q64@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x760000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "i2c", "spi refclk", "wled";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -118,3 +42,77 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ en25q64@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x760000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "spi refclk", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/ZBT-WE826.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ZBT-WE826.dts
	+++ head/sys/gnu/dts/mips/ZBT-WE826.dts
	@@ -1,124 +1,122 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	- compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
	- model = "ZBT-WE826";
	+ compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
	+ model = "ZBT-WE826";

	- chosen {
	- bootargs = "console=ttyS0,115200";
	- };
	-
	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- en25q128@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "w25q128";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	- };
	- };
	-
	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- ralink,port-map = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	- power {
	- label = "zbt-we826:green:power";
	- gpios = <&gpio1 14 0>;
	- };
	- usb {
	- label = "zbt-we826:green:usb";
	- gpios = <&gpio1 15 0>;
	- };
	- air {
	- label = "zbt-we826:green:wifi";
	- gpios = <&gpio3 0 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	- reset {
	- label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- pcie@10140000 {
	- status = "okay";
	- };
	-};
	\ No newline at end of file
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ power {
	+ label = "zbt-we826:green:power";
	+ gpios = <&gpio1 14 0>;
	+ };
	+ usb {
	+ label = "zbt-we826:green:usb";
	+ gpios = <&gpio1 15 0>;
	+ };
	+ air {
	+ label = "zbt-we826:green:wifi";
	+ gpios = <&gpio3 0 1>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 1>;
	+ linux,code = <0x198>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ en25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "w25q128";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ ralink,port-map = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/ZBT-WG2626.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ZBT-WG2626.dts
	+++ head/sys/gnu/dts/mips/ZBT-WG2626.dts
	@@ -15,48 +15,7 @@
	bootargs = "console=ttyS0,115200";
	};

	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- palmbus@1E000000 {
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	-
	- };
	- };
	-
	+ palmbus: palmbus@1E000000 {
	i2c@900 {
	compatible = "ralink,i2c-mt7621";
	reg = <0x900 0x100>;
	@@ -68,32 +27,6 @@
	};
	};

	- pcie@1e140000 {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	- };
	-
	- ethernet@1e100000 {
	- mtd-mac-address = <&factory 0xe000>;
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -115,13 +48,79 @@
	gpios = <&gpio0 24 1>;
	};
	};
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};

	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	- ralink,function = "gpio";
	- };
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,function = "gpio";
	};
	};
	};
	Index: head/sys/gnu/dts/mips/ZBT-WG3526.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ZBT-WG3526.dts
	+++ head/sys/gnu/dts/mips/ZBT-WG3526.dts
	@@ -0,0 +1,126 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+/ {
	+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ model = "ZBT-WG3526";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ palmbus: palmbus@1E000000 {
	+ i2c@900 {
	+ compatible = "ralink,i2c-mt7621";
	+ reg = <0x900 0x100>;
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ status = "okay";
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 1>;
	+ linux,code = <0x198>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "zbt-wg3526:green:status";
	+ gpios = <&gpio0 24 1>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ mediatek,5ghz = <0>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ mediatek,2ghz = <0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/ZBT-WR8305RT.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ZBT-WR8305RT.dts
	+++ head/sys/gnu/dts/mips/ZBT-WR8305RT.dts
	@@ -1,88 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620n.dtsi"
	+#include "mt7620n.dtsi"

	/ {
	compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
	model = "Zbtlink ZBT-WR8305RT";

	- palmbus@10000000 {
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- gpio3: gpio@688 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	- ethernet@10100000 {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- ephy {
	- ralink,group = "ephy";
	- ralink,function = "ephy";
	- };
	-
	- default {
	- ralink,group = "i2c", "uartf", "spi refclk", "wled";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -115,3 +38,78 @@
	};
	};
	};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ ephy {
	+ ralink,group = "ephy";
	+ ralink,function = "ephy";
	+ };
	+
	+ default {
	+ ralink,group = "i2c", "uartf", "spi refclk", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: head/sys/gnu/dts/mips/ZTE-Q7.dts
	===================================================================
	--- head/sys/gnu/dts/mips/ZTE-Q7.dts
	+++ head/sys/gnu/dts/mips/ZTE-Q7.dts
	@@ -1,89 +1,11 @@
	/dts-v1/;

	-/include/ "mt7620a.dtsi"
	+#include "mt7620a.dtsi"

	/ {
	compatible = "ZTE-Q7", "ralink,mt7620a-soc";
	model = "ZTE Q7";

	- palmbus@10000000 {
	- gpio0: gpio@600 {
	- status = "okay";
	- };
	-
	- gpio1: gpio@638 {
	- status = "okay";
	- };
	-
	- spi@b00 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	- };
	- };
	- };
	-
	- pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	- };
	- };
	-
	- ethernet@10100000 {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	- };
	-
	- wmac@10180000 {
	- ralink,mtd-eeprom = <&factory 0>;
	- };
	-
	- sdhci@10130000 {
	- status = "okay";
	- };
	-
	- ehci@101c0000 {
	- status = "okay";
	- };
	-
	- ohci@101c1000 {
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	@@ -111,3 +33,79 @@
	};
	};
	};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ linux,modalias = "m25p80", "en25q64";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: head/sys/gnu/dts/mips/mt7620a.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/mt7620a.dtsi
	+++ head/sys/gnu/dts/mips/mt7620a.dtsi
	@@ -23,9 +23,10 @@
	aliases {
	spi0 = &spi0;
	spi1 = &spi1;
	+ serial0 = &uartlite;
	};

	- palmbus@10000000 {
	+ palmbus: palmbus@10000000 {
	compatible = "palmbus";
	reg = <0x10000000 0x200000>;
	ranges = <0x0 0x10000000 0x1FFFFF>;
	@@ -33,12 +34,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
	reg = <0x0 0x100>;
	};

	- timer@100 {
	+ timer: timer@100 {
	compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
	reg = <0x100 0x20>;

	@@ -46,7 +47,7 @@
	interrupts = <1>;
	};

	- watchdog@120 {
	+ watchdog: watchdog@120 {
	compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
	reg = <0x120 0x10>;

	@@ -71,7 +72,7 @@
	interrupts = <2>;
	};

	- memc@300 {
	+ memc: memc@300 {
	compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
	reg = <0x300 0x100>;

	@@ -82,7 +83,7 @@
	interrupts = <3>;
	};

	- uart@500 {
	+ uart: uart@500 {
	compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0x500 0x100>;

	@@ -174,7 +175,7 @@
	status = "disabled";
	};

	- i2c@900 {
	+ i2c: i2c@900 {
	compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
	reg = <0x900 0x100>;

	@@ -190,7 +191,7 @@
	pinctrl-0 = <&i2c_pins>;
	};

	- i2s@a00 {
	+ i2s: i2s@a00 {
	compatible = "ralink,mt7620a-i2s";
	reg = <0xa00 0x100>;

	@@ -239,7 +240,7 @@
	pinctrl-0 = <&spi_cs1>;
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;

	@@ -255,7 +256,7 @@
	pinctrl-0 = <&uartlite_pins>;
	};

	- systick@d00 {
	+ systick: systick@d00 {
	compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
	reg = <0xd00 0x10>;

	@@ -266,7 +267,7 @@
	interrupts = <7>;
	};

	- pcm@2000 {
	+ pcm: pcm@2000 {
	compatible = "ralink,mt7620a-pcm";
	reg = <0x2000 0x800>;

	@@ -297,7 +298,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";
	pinctrl-names = "default";
	pinctrl-0 = <&state_default>;
	@@ -395,17 +396,25 @@
	#reset-cells = <1>;
	};

	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	usbphy: usbphy {
	compatible = "mediatek,mt7620-usbphy";
	#phy-cells = <1>;

	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	+
	+ clocks = <&clkctrl 22 &clkctrl 25>;
	+ clock-names = "host", "device";
	};

	- ethernet@10100000 {
	+ ethernet: ethernet@10100000 {
	compatible = "mediatek,mt7620-eth";
	- reg = <0x10100000 10000>;
	+ reg = <0x10100000 0x10000>;

	#address-cells = <1>;
	#size-cells = <0>;
	@@ -442,7 +451,7 @@

	gsw: gsw@10110000 {
	compatible = "mediatek,mt7620-gsw";
	- reg = <0x10110000 8000>;
	+ reg = <0x10110000 0x8000>;

	resets = <&rstctrl 23>;
	reset-names = "esw";
	@@ -451,9 +460,9 @@
	interrupts = <17>;
	};

	- sdhci@10130000 {
	+ sdhci: sdhci@10130000 {
	compatible = "ralink,mt7620-sdhci";
	- reg = <0x10130000 4000>;
	+ reg = <0x10130000 0x4000>;

	interrupt-parent = <&intc>;
	interrupts = <14>;
	@@ -461,7 +470,7 @@
	status = "disabled";
	};

	- ehci@101c0000 {
	+ ehci: ehci@101c0000 {
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	@@ -474,7 +483,7 @@
	status = "disabled";
	};

	- ohci@101c1000 {
	+ ohci: ohci@101c1000 {
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	@@ -487,7 +496,7 @@
	status = "disabled";
	};

	- pcie@10140000 {
	+ pcie: pcie@10140000 {
	compatible = "mediatek,mt7620-pci";
	reg = <0x10140000 0x100
	0x10142000 0x100>;
	@@ -498,6 +507,9 @@
	resets = <&rstctrl 26>;
	reset-names = "pcie0";

	+ clocks = <&clkctrl 26>;
	+ clock-names = "pcie0";
	+
	interrupt-parent = <&cpuintc>;
	interrupts = <4>;

	@@ -524,9 +536,9 @@
	};
	};

	- wmac@10180000 {
	+ wmac: wmac@10180000 {
	compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
	- reg = <0x10180000 40000>;
	+ reg = <0x10180000 0x40000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <6>;
	@@ -535,4 +547,4 @@
	};
	};

	-/include/ "fbsd-mt7620a.dtsi"
	+#include "fbsd-mt7620a.dtsi"
	Index: head/sys/gnu/dts/mips/mt7620n.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/mt7620n.dtsi
	+++ head/sys/gnu/dts/mips/mt7620n.dtsi
	@@ -23,9 +23,10 @@
	aliases {
	spi0 = &spi0;
	spi1 = &spi1;
	+ serial0 = &uartlite;
	};

	- palmbus@10000000 {
	+ palmbus: palmbus@10000000 {
	compatible = "palmbus";
	reg = <0x10000000 0x200000>;
	ranges = <0x0 0x10000000 0x1FFFFF>;
	@@ -33,12 +34,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
	reg = <0x0 0x100>;
	};

	- timer@100 {
	+ timer: timer@100 {
	compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
	reg = <0x100 0x20>;

	@@ -46,7 +47,7 @@
	interrupts = <1>;
	};

	- watchdog@120 {
	+ watchdog: watchdog@120 {
	compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
	reg = <0x120 0x10>;

	@@ -71,7 +72,7 @@
	interrupts = <2>;
	};

	- memc@300 {
	+ memc: memc@300 {
	compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
	reg = <0x300 0x100>;

	@@ -191,7 +192,7 @@
	pinctrl-0 = <&spi_cs1>;
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;

	@@ -207,7 +208,7 @@
	pinctrl-0 = <&uartlite_pins>;
	};

	- systick@d00 {
	+ systick: systick@d00 {
	compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
	reg = <0xd00 0x10>;

	@@ -219,7 +220,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";
	pinctrl-names = "default";
	pinctrl-0 = <&state_default>;
	@@ -254,17 +255,25 @@
	#reset-cells = <1>;
	};

	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	usbphy: usbphy {
	compatible = "mediatek,mt7620-usbphy";
	#phy-cells = <1>;

	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	+
	+ clocks = <&clkctrl 22 &clkctrl 25>;
	+ clock-names = "host", "device";
	};

	- ethernet@10100000 {
	+ ethernet: ethernet@10100000 {
	compatible = "mediatek,mt7620-eth";
	- reg = <0x10100000 10000>;
	+ reg = <0x10100000 0x10000>;

	#address-cells = <1>;
	#size-cells = <0>;
	@@ -287,7 +296,7 @@

	gsw: gsw@10110000 {
	compatible = "mediatek,mt7620-gsw";
	- reg = <0x10110000 8000>;
	+ reg = <0x10110000 0x8000>;

	resets = <&rstctrl 23>;
	reset-names = "esw";
	@@ -297,7 +306,7 @@
	mediatek,port4 = "gmac";
	};

	- ehci@101c0000 {
	+ ehci: ehci@101c0000 {
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	@@ -310,7 +319,7 @@
	status = "disabled";
	};

	- ohci@101c1000 {
	+ ohci: ohci@101c1000 {
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	@@ -323,9 +332,9 @@
	status = "disabled";
	};

	- wmac@10180000 {
	+ wmac: wmac@10180000 {
	compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
	- reg = <0x10180000 40000>;
	+ reg = <0x10180000 0x40000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <6>;
	@@ -333,5 +342,3 @@
	ralink,eeprom = "soc_wmac.eeprom";
	};
	};
	-
	-/include/ "fbsd-mt7620n.dtsi"
	Index: head/sys/gnu/dts/mips/mt7621.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/mt7621.dtsi
	+++ head/sys/gnu/dts/mips/mt7621.dtsi
	@@ -22,6 +22,10 @@
	compatible = "mti,cpu-interrupt-controller";
	};

	+ aliases {
	+ serial0 = &uartlite;
	+ };
	+
	cpuclock: cpuclock@0 {
	#clock-cells = <0>;
	compatible = "fixed-clock";
	@@ -38,7 +42,7 @@
	clock-frequency = <50000000>;
	};

	- palmbus@1E000000 {
	+ palmbus: palmbus@1E000000 {
	compatible = "palmbus";
	reg = <0x1E000000 0x100000>;
	ranges = <0x0 0x1E000000 0x0FFFFF>;
	@@ -46,12 +50,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "mtk,mt7621-sysc";
	reg = <0x0 0x100>;
	};

	- wdt@100 {
	+ wdt: wdt@100 {
	compatible = "mtk,mt7621-wdt";
	reg = <0x100 0x100>;
	};
	@@ -85,26 +89,27 @@
	};
	};

	- memc@5000 {
	+ memc: memc@5000 {
	compatible = "mtk,mt7621-memc";
	reg = <0x300 0x100>;
	};

	- cpc@1fbf0000 {
	+ cpc: cpc@1fbf0000 {
	compatible = "mtk,mt7621-cpc";
	reg = <0x1fbf0000 0x8000>;
	};

	- mc@1fbf8000 {
	+ mc: mc@1fbf8000 {
	compatible = "mtk,mt7621-mc";
	reg = <0x1fbf8000 0x8000>;
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ns16550a";
	reg = <0xc00 0x100>;

	clocks = <&sysclock>;
	+ clock-frequency = <50000000>;

	interrupt-parent = <&gic>;
	interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
	@@ -114,7 +119,7 @@
	no-loopback-test;
	};

	- spi@b00 {
	+ spi0: spi@b00 {
	status = "okay";

	compatible = "ralink,mt7621-spi";
	@@ -141,7 +146,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";
	pinctrl-names = "default";
	pinctrl-0 = <&state_default>;
	@@ -237,15 +242,20 @@
	#reset-cells = <1>;
	};

	- sdhci@1E130000 {
	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	+ sdhci: sdhci@1E130000 {
	compatible = "ralink,mt7620-sdhci";
	- reg = <0x1E130000 4000>;
	+ reg = <0x1E130000 0x4000>;

	interrupt-parent = <&gic>;
	interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
	};

	- xhci@1E1C0000 {
	+ xhci: xhci@1E1C0000 {
	status = "okay";

	compatible = "mediatek,mt8173-xhci";
	@@ -275,7 +285,7 @@
	};
	};

	- nand@1e003000 {
	+ nand: nand@1e003000 {
	status = "disabled";

	compatible = "mtk,mt7621-nand";
	@@ -286,9 +296,9 @@
	#size-cells = <1>;
	};

	- ethernet@1e100000 {
	+ ethernet: ethernet@1e100000 {
	compatible = "mediatek,mt7621-eth";
	- reg = <0x1e100000 10000>;
	+ reg = <0x1e100000 0x10000>;

	#address-cells = <1>;
	#size-cells = <0>;
	@@ -314,12 +324,12 @@

	gsw: gsw@1e110000 {
	compatible = "mediatek,mt7621-gsw";
	- reg = <0x1e110000 8000>;
	+ reg = <0x1e110000 0x8000>;
	interrupt-parent = <&gic>;
	interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
	};

	- pcie@1e140000 {
	+ pcie: pcie@1e140000 {
	compatible = "mediatek,mt7621-pci";
	reg = <0x1e140000 0x100
	0x1e142000 0x100>;
	@@ -345,6 +355,11 @@

	status = "okay";

	+ resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
	+ reset-names = "pcie0", "pcie1", "pcie2";
	+ clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
	+ clock-names = "pcie0", "pcie1", "pcie2";
	+
	pcie0 {
	reg = <0x0000 0 0 0 0>;

	@@ -374,4 +389,4 @@
	};
	};

	-/include/ "fbsd-mt7621.dtsi"
	+#include "fbsd-mt7621.dtsi"
	Index: head/sys/gnu/dts/mips/mt7628an.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/mt7628an.dtsi
	+++ head/sys/gnu/dts/mips/mt7628an.dtsi
	@@ -13,6 +13,10 @@
	bootargs = "console=ttyS0,57600";
	};

	+ aliases {
	+ serial0 = &uartlite;
	+ };
	+
	cpuintc: cpuintc@0 {
	#address-cells = <0>;
	#interrupt-cells = <1>;
	@@ -20,7 +24,7 @@
	compatible = "mti,cpu-interrupt-controller";
	};

	- palmbus@10000000 {
	+ palmbus: palmbus@10000000 {
	compatible = "palmbus";
	reg = <0x10000000 0x200000>;
	ranges = <0x0 0x10000000 0x1FFFFF>;
	@@ -28,12 +32,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "ralink,mt7620a-sysc";
	reg = <0x0 0x100>;
	};

	- watchdog@120 {
	+ watchdog: watchdog@120 {
	compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
	reg = <0x120 0x10>;

	@@ -62,7 +66,7 @@
	0x80 0x78>;
	};

	- memc@300 {
	+ memc: memc@300 {
	compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
	reg = <0x300 0x100>;

	@@ -105,7 +109,7 @@
	};
	};

	- i2c@900 {
	+ i2c: i2c@900 {
	compatible = "mediatek,mt7628-i2c";
	reg = <0x900 0x100>;

	@@ -121,7 +125,7 @@
	pinctrl-0 = <&i2c_pins>;
	};

	- i2s@a00 {
	+ i2s: i2s@a00 {
	compatible = "ralink,mt7620a-i2s";
	reg = <0xa00 0x100>;

	@@ -138,7 +142,7 @@
	status = "disabled";
	};

	- spi@b00 {
	+ spi0: spi@b00 {
	compatible = "ralink,mt7621-spi";
	reg = <0xb00 0x100>;

	@@ -154,7 +158,7 @@
	status = "disabled";
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ns16550a";
	reg = <0xc00 0x100>;

	@@ -162,6 +166,8 @@
	reg-io-width = <4>;
	no-loopback-test;

	+ clock-frequency = <40000000>;
	+
	resets = <&rstctrl 12>;
	reset-names = "uartl";

	@@ -172,7 +178,7 @@
	pinctrl-0 = <&uart0_pins>;
	};

	- uart1@d00 {
	+ uart1: uart1@d00 {
	compatible = "ns16550a";
	reg = <0xd00 0x100>;

	@@ -180,6 +186,8 @@
	reg-io-width = <4>;
	no-loopback-test;

	+ clock-frequency = <40000000>;
	+
	resets = <&rstctrl 19>;
	reset-names = "uart1";

	@@ -192,7 +200,7 @@
	status = "disabled";
	};

	- uart2@e00 {
	+ uart2: uart2@e00 {
	compatible = "ns16550a";
	reg = <0xe00 0x100>;

	@@ -200,6 +208,8 @@
	reg-io-width = <4>;
	no-loopback-test;

	+ clock-frequency = <40000000>;
	+
	resets = <&rstctrl 20>;
	reset-names = "uart2";

	@@ -212,7 +222,7 @@
	status = "disabled";
	};

	- pwm@5000 {
	+ pwm: pwm@5000 {
	compatible = "mediatek,mt7628-pwm";
	reg = <0x5000 0x1000>;

	@@ -225,7 +235,7 @@
	status = "disabled";
	};

	- pcm@2000 {
	+ pcm: pcm@2000 {
	compatible = "ralink,mt7620a-pcm";
	reg = <0x2000 0x800>;

	@@ -256,7 +266,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";
	pinctrl-names = "default";
	pinctrl-0 = <&state_default>;
	@@ -340,18 +350,25 @@
	#reset-cells = <1>;
	};

	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	usbphy: usbphy@10120000 {
	compatible = "ralink,mt7628an-usbphy", "mediatek,mt7620-usbphy";
	- reg = <0x10120000 4000>;
	+ reg = <0x10120000 0x4000>;
	#phy-cells = <1>;

	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	+ clocks = <&clkctrl 22 &clkctrl 25>;
	+ clock-names = "host", "device";
	};

	- sdhci@10130000 {
	+ sdhci: sdhci@10130000 {
	compatible = "ralink,mt7620-sdhci";
	- reg = <0x10130000 4000>;
	+ reg = <0x10130000 0x4000>;

	interrupt-parent = <&intc>;
	interrupts = <14>;
	@@ -362,7 +379,7 @@
	status = "disabled";
	};

	- ehci@101c0000 {
	+ ehci: ehci@101c0000 {
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	@@ -373,7 +390,7 @@
	interrupts = <18>;
	};

	- ohci@101c1000 {
	+ ohci: ohci@101c1000 {
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	@@ -384,9 +401,9 @@
	interrupts = <18>;
	};

	- ethernet@10100000 {
	+ ethernet: ethernet@10100000 {
	compatible = "ralink,rt5350-eth";
	- reg = <0x10100000 10000>;
	+ reg = <0x10100000 0x10000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <5>;
	@@ -398,8 +415,8 @@
	};

	esw: esw@10110000 {
	- compatible = "ralink,rt3050-esw";
	- reg = <0x10110000 8000>;
	+ compatible = "mediatek,mt7628-esw", "ralink,rt3050-esw";
	+ reg = <0x10110000 0x8000>;

	resets = <&rstctrl 23>;
	reset-names = "esw";
	@@ -408,7 +425,7 @@
	interrupts = <17>;
	};

	- pcie@10140000 {
	+ pcie: pcie@10140000 {
	compatible = "mediatek,mt7620-pci";
	reg = <0x10140000 0x100
	0x10142000 0x100>;
	@@ -416,12 +433,14 @@
	#address-cells = <3>;
	#size-cells = <2>;

	- resets = <&rstctrl 26>;
	- reset-names = "pcie0";
	-
	interrupt-parent = <&cpuintc>;
	interrupts = <4>;

	+ resets = <&rstctrl 26 &rstctrl 27>;
	+ reset-names = "pcie0", "pcie1";
	+ clocks = <&clkctrl 26 &clkctrl 27>;
	+ clock-names = "pcie0", "pcie1";
	+
	status = "disabled";

	device_type = "pci";
	@@ -444,7 +463,7 @@

	wmac: wmac@10300000 {
	compatible = "mediatek,mt7628-wmac";
	- reg = <0x10300000 100000>;
	+ reg = <0x10300000 0x100000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <6>;
	@@ -456,4 +475,4 @@
	};
	};

	-/include/ "fbsd-mt7628an.dtsi"
	+#include "fbsd-mt7628an.dtsi"
	Index: head/sys/gnu/dts/mips/rt2880.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/rt2880.dtsi
	+++ head/sys/gnu/dts/mips/rt2880.dtsi
	@@ -13,6 +13,10 @@
	bootargs = "console=ttyS0,57600";
	};

	+ aliases {
	+ serial0 = &uartlite;
	+ };
	+
	cpuintc: cpuintc@0 {
	#address-cells = <0>;
	#interrupt-cells = <1>;
	@@ -20,7 +24,7 @@
	compatible = "mti,cpu-interrupt-controller";
	};

	- palmbus@300000 {
	+ palmbus: palmbus@300000 {
	compatible = "palmbus";
	reg = <0x300000 0x200000>;
	ranges = <0x0 0x300000 0x1FFFFF>;
	@@ -28,12 +32,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "ralink,rt2880-sysc";
	reg = <0x000 0x100>;
	};

	- timer@100 {
	+ timer: timer@100 {
	compatible = "ralink,rt2880-timer";
	reg = <0x100 0x20>;

	@@ -43,7 +47,7 @@
	status = "disabled";
	};

	- watchdog@120 {
	+ watchdog: watchdog@120 {
	compatible = "ralink,rt2880-wdt";
	reg = <0x120 0x10>;
	};
	@@ -59,7 +63,7 @@
	interrupts = <2>;
	};

	- memc@300 {
	+ memc: memc@300 {
	compatible = "ralink,rt2880-memc";
	reg = <0x300 0x100>;
	};
	@@ -110,7 +114,7 @@
	status = "disabled";
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;

	@@ -121,7 +125,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";

	pinctrl-names = "default";
	@@ -154,9 +158,14 @@
	#reset-cells = <1>;
	};

	- ethernet@400000 {
	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	+ ethernet: ethernet@400000 {
	compatible = "ralink,rt2880-eth";
	- reg = <0x00400000 10000>;
	+ reg = <0x00400000 0x10000>;

	#address-cells = <1>;
	#size-cells = <0>;
	@@ -182,9 +191,9 @@
	};
	};

	- wmac@480000 {
	+ wmac: wmac@480000 {
	compatible = "ralink,rt2880-wmac";
	- reg = <0x480000 40000>;
	+ reg = <0x480000 0x40000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <6>;
	@@ -192,5 +201,3 @@
	ralink,eeprom = "soc_wmac.eeprom";
	};
	};
	-
	-/include/ "fbsd-rt2880.dtsi"
	Index: head/sys/gnu/dts/mips/rt3050.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/rt3050.dtsi
	+++ head/sys/gnu/dts/mips/rt3050.dtsi
	@@ -15,6 +15,7 @@

	aliases {
	spi0 = &spi0;
	+ serial0 = &uartlite;
	};

	cpuintc: cpuintc@0 {
	@@ -24,7 +25,7 @@
	compatible = "mti,cpu-interrupt-controller";
	};

	- palmbus@10000000 {
	+ palmbus: palmbus@10000000 {
	compatible = "palmbus";
	reg = <0x10000000 0x200000>;
	ranges = <0x0 0x10000000 0x1FFFFF>;
	@@ -32,12 +33,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "ralink,rt3050-sysc";
	reg = <0x0 0x100>;
	};

	- timer@100 {
	+ timer: timer@100 {
	compatible = "ralink,rt3050-timer", "ralink,rt2880-timer";
	reg = <0x100 0x20>;

	@@ -45,7 +46,7 @@
	interrupts = <1>;
	};

	- watchdog@120 {
	+ watchdog: watchdog@120 {
	compatible = "ralink,rt3050-wdt", "ralink,rt2880-wdt";
	reg = <0x120 0x10>;

	@@ -70,7 +71,7 @@
	interrupts = <2>;
	};

	- memc@300 {
	+ memc: memc@300 {
	compatible = "ralink,rt3050-memc";
	reg = <0x300 0x100>;

	@@ -81,7 +82,7 @@
	interrupts = <3>;
	};

	- uart@500 {
	+ uart: uart@500 {
	compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0x500 0x100>;

	@@ -164,7 +165,7 @@
	status = "disabled";
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;

	@@ -181,7 +182,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";

	pinctrl-names = "default";
	@@ -214,9 +215,22 @@
	#reset-cells = <1>;
	};

	- ethernet@10100000 {
	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	+ usbphy: usbphy {
	+ compatible = "ralink,rt3050-usbphy";
	+ resets = <&rstctrl 22>;
	+ reset-names = "host";
	+ clocks = <&clkctrl 18>;
	+ clock-names = "host";
	+ };
	+
	+ ethernet: ethernet@10100000 {
	compatible = "ralink,rt3050-eth";
	- reg = <0x10100000 10000>;
	+ reg = <0x10100000 0x10000>;

	resets = <&rstctrl 21>;
	reset-names = "fe";
	@@ -229,7 +243,7 @@

	esw: esw@10110000 {
	compatible = "ralink,rt3050-esw";
	- reg = <0x10110000 8000>;
	+ reg = <0x10110000 0x8000>;

	resets = <&rstctrl 23>;
	reset-names = "esw";
	@@ -238,9 +252,9 @@
	interrupts = <17>;
	};

	- wmac@10180000 {
	+ wmac: wmac@10180000 {
	compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac";
	- reg = <0x10180000 40000>;
	+ reg = <0x10180000 0x40000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <6>;
	@@ -248,9 +262,9 @@
	ralink,eeprom = "soc_wmac.eeprom";
	};

	- otg@101c0000 {
	+ otg: otg@101c0000 {
	compatible = "ralink,rt3050-otg", "snps,dwc2";
	- reg = <0x101c0000 40000>;
	+ reg = <0x101c0000 0x40000>;

	interrupt-parent = <&intc>;
	interrupts = <18>;
	@@ -261,5 +275,3 @@
	status = "disabled";
	};
	};
	-
	-/include/ "fbsd-rt3050.dtsi"
	Index: head/sys/gnu/dts/mips/rt3352.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/rt3352.dtsi
	+++ head/sys/gnu/dts/mips/rt3352.dtsi
	@@ -23,9 +23,10 @@
	aliases {
	spi0 = &spi0;
	spi1 = &spi1;
	+ serial0 = &uartlite;
	};

	- palmbus@10000000 {
	+ palmbus: palmbus@10000000 {
	compatible = "palmbus";
	reg = <0x10000000 0x200000>;
	ranges = <0x0 0x10000000 0x1FFFFF>;
	@@ -33,12 +34,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc";
	reg = <0x0 0x100>;
	};

	- timer@100 {
	+ timer: timer@100 {
	compatible = "ralink,rt3352-timer", "ralink,rt2880-timer";
	reg = <0x100 0x20>;

	@@ -46,7 +47,7 @@
	interrupts = <1>;
	};

	- watchdog@120 {
	+ watchdog: watchdog@120 {
	compatible = "ralink,rt3352-wdt", "ralink,rt2880-wdt";
	reg = <0x120 0x10>;

	@@ -68,7 +69,7 @@
	interrupts = <2>;
	};

	- memc@300 {
	+ memc: memc@300 {
	compatible = "ralink,rt3352-memc", "ralink,rt3050-memc";
	reg = <0x300 0x100>;

	@@ -79,7 +80,7 @@
	interrupts = <3>;
	};

	- uart@500 {
	+ uart: uart@500 {
	compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0x500 0x100>;

	@@ -175,7 +176,7 @@
	status = "disabled";
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;

	@@ -192,7 +193,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";

	pinctrl-names = "default";
	@@ -228,9 +229,14 @@
	#reset-cells = <1>;
	};

	- ethernet@10100000 {
	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	+ ethernet: ethernet@10100000 {
	compatible = "ralink,rt3352-eth", "ralink,rt3050-eth";
	- reg = <0x10100000 10000>;
	+ reg = <0x10100000 0x10000>;

	resets = <&rstctrl 21>;
	reset-names = "fe";
	@@ -243,7 +249,7 @@

	esw: esw@10110000 {
	compatible = "ralink,rt3352-esw", "ralink,rt3050-esw";
	- reg = <0x10110000 8000>;
	+ reg = <0x10110000 0x8000>;

	resets = <&rstctrl 23>;
	reset-names = "esw";
	@@ -252,16 +258,19 @@
	interrupts = <17>;
	};

	- usbphy {
	+ usbphy: usbphy {
	compatible = "ralink,rt3352-usbphy";
	+ #phy-cells = <1>;

	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	+ clocks = <&clkctrl 18 &clkctrl 20>;
	+ clock-names = "host", "device";
	};

	- wmac@10180000 {
	+ wmac: wmac@10180000 {
	compatible = "ralink,rt3352-wmac", "ralink,rt2880-wmac";
	- reg = <0x10180000 40000>;
	+ reg = <0x10180000 0x40000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <6>;
	@@ -269,25 +278,29 @@
	ralink,eeprom = "soc_wmac.eeprom";
	};

	- ehci@101c0000 {
	+ ehci: ehci@101c0000 {
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	+ phys = <&usbphy 1>;
	+ phy-names = "usb";
	+
	interrupt-parent = <&intc>;
	interrupts = <18>;

	status = "disabled";
	};

	- ohci@101c1000 {
	+ ohci: ohci@101c1000 {
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	+ phys = <&usbphy 1>;
	+ phy-names = "usb";
	+
	interrupt-parent = <&intc>;
	interrupts = <18>;

	status = "disabled";
	};
	};
	-
	-/include/ "fbsd-rt3352.dtsi"
	Index: head/sys/gnu/dts/mips/rt3883.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/rt3883.dtsi
	+++ head/sys/gnu/dts/mips/rt3883.dtsi
	@@ -16,6 +16,7 @@
	aliases {
	spi0 = &spi0;
	spi1 = &spi1;
	+ serial0 = &uartlite;
	};

	cpuintc: cpuintc@0 {
	@@ -25,7 +26,7 @@
	compatible = "mti,cpu-interrupt-controller";
	};

	- palmbus@10000000 {
	+ palmbus: palmbus@10000000 {
	compatible = "palmbus";
	reg = <0x10000000 0x200000>;
	ranges = <0x0 0x10000000 0x1FFFFF>;
	@@ -33,12 +34,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
	reg = <0x0 0x100>;
	};

	- timer@100 {
	+ timer: timer@100 {
	compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
	reg = <0x100 0x20>;

	@@ -46,7 +47,7 @@
	interrupts = <1>;
	};

	- watchdog@120 {
	+ watchdog: watchdog@120 {
	compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
	reg = <0x120 0x10>;

	@@ -71,7 +72,7 @@
	interrupts = <2>;
	};

	- memc@300 {
	+ memc: memc@300 {
	compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
	reg = <0x300 0x100>;

	@@ -82,7 +83,7 @@
	interrupts = <3>;
	};

	- uart@500 {
	+ uart: uart@500 {
	compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0x500 0x100>;

	@@ -195,7 +196,7 @@
	status = "disabled";
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;

	@@ -212,7 +213,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";

	pinctrl-names = "default";
	@@ -243,9 +244,9 @@
	};
	};

	- ethernet@10100000 {
	+ ethernet: ethernet@10100000 {
	compatible = "ralink,rt3883-eth";
	- reg = <0x10100000 10000>;
	+ reg = <0x10100000 0x10000>;

	resets = <&rstctrl 21>;
	reset-names = "fe";
	@@ -271,7 +272,12 @@
	#reset-cells = <1>;
	};

	- pci@10140000 {
	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	+ pci: pci@10140000 {
	compatible = "ralink,rt3883-pci";
	reg = <0x10140000 0x20000>;
	#address-cells = <1>;
	@@ -363,11 +369,13 @@

	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	+ clocks = <&clkctrl 22 &clkctrl 25>;
	+ clock-names = "host", "device";
	};

	- wmac@10180000 {
	+ wmac: wmac@10180000 {
	compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
	- reg = <0x10180000 40000>;
	+ reg = <0x10180000 0x40000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <6>;
	@@ -375,7 +383,7 @@
	ralink,eeprom = "soc_wmac.eeprom";
	};

	- ehci@101c0000 {
	+ ehci: ehci@101c0000 {
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	@@ -388,7 +396,7 @@
	status = "disabled";
	};

	- ohci@101c1000 {
	+ ohci: ohci@101c1000 {
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	@@ -402,4 +410,4 @@
	};
	};

	-/include/ "fbsd-rt3883.dtsi"
	+#include "fbsd-rt3883.dtsi"
	Index: head/sys/gnu/dts/mips/rt5350.dtsi
	===================================================================
	--- head/sys/gnu/dts/mips/rt5350.dtsi
	+++ head/sys/gnu/dts/mips/rt5350.dtsi
	@@ -23,9 +23,10 @@
	aliases {
	spi0 = &spi0;
	spi1 = &spi1;
	+ serial0 = &uartlite;
	};

	- palmbus@10000000 {
	+ palmbus: palmbus@10000000 {
	compatible = "palmbus";
	reg = <0x10000000 0x200000>;
	ranges = <0x0 0x10000000 0x1FFFFF>;
	@@ -33,12 +34,12 @@
	#address-cells = <1>;
	#size-cells = <1>;

	- sysc@0 {
	+ sysc: sysc@0 {
	compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
	reg = <0x0 0x100>;
	};

	- timer@100 {
	+ timer: timer@100 {
	compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
	reg = <0x100 0x20>;

	@@ -46,7 +47,7 @@
	interrupts = <1>;
	};

	- watchdog@120 {
	+ watchdog: watchdog@120 {
	compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
	reg = <0x120 0x10>;

	@@ -71,7 +72,7 @@
	interrupts = <2>;
	};

	- memc@300 {
	+ memc: memc@300 {
	compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
	reg = <0x300 0x100>;

	@@ -82,7 +83,7 @@
	interrupts = <3>;
	};

	- uart@500 {
	+ uart: uart@500 {
	compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0x500 0x100>;

	@@ -136,7 +137,7 @@
	status = "disabled";
	};

	- i2c@900 {
	+ i2c: i2c@900 {
	compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
	reg = <0x900 0x100>;

	@@ -184,7 +185,7 @@
	status = "disabled";
	};

	- uartlite@c00 {
	+ uartlite: uartlite@c00 {
	compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;

	@@ -200,7 +201,7 @@
	reg-shift = <2>;
	};

	- systick@d00 {
	+ systick: systick@d00 {
	compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
	reg = <0xd00 0x10>;

	@@ -209,7 +210,7 @@
	};
	};

	- pinctrl {
	+ pinctrl: pinctrl {
	compatible = "ralink,rt2880-pinmux";

	pinctrl-names = "default";
	@@ -266,17 +267,24 @@
	#reset-cells = <1>;
	};

	+ clkctrl: clkctrl {
	+ compatible = "ralink,rt2880-clock";
	+ #clock-cells = <1>;
	+ };
	+
	usbphy: usbphy {
	compatible = "ralink,rt3352-usbphy";
	#phy-cells = <1>;

	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	+ clocks = <&clkctrl 18>;
	+ clock-names = "host";
	};

	- ethernet@10100000 {
	+ ethernet: ethernet@10100000 {
	compatible = "ralink,rt5350-eth";
	- reg = <0x10100000 10000>;
	+ reg = <0x10100000 0x10000>;

	resets = <&rstctrl 21 &rstctrl 23>;
	reset-names = "fe", "esw";
	@@ -288,8 +296,8 @@
	};

	esw: esw@10110000 {
	- compatible = "ralink,rt3050-esw";
	- reg = <0x10110000 8000>;
	+ compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
	+ reg = <0x10110000 0x8000>;

	resets = <&rstctrl 23>;
	reset-names = "esw";
	@@ -298,9 +306,9 @@
	interrupts = <17>;
	};

	- wmac@10180000 {
	+ wmac: wmac@10180000 {
	compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac";
	- reg = <0x10180000 40000>;
	+ reg = <0x10180000 0x40000>;

	interrupt-parent = <&cpuintc>;
	interrupts = <6>;
	@@ -308,7 +316,7 @@
	ralink,eeprom = "soc_wmac.eeprom";
	};

	- ehci@101c0000 {
	+ ehci: ehci@101c0000 {
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	@@ -319,7 +327,7 @@
	interrupts = <18>;
	};

	- ohci@101c1000 {
	+ ohci: ohci@101c1000 {
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	@@ -330,5 +338,3 @@
	interrupts = <18>;
	};
	};
	-
	-/include/ "fbsd-rt5350.dtsi"

File Metadata

Mime Type: text/plain
Expires: Wed, Apr 8, 8:11 AM (10 h, 21 m)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 31074481
Default Alt Text: D6394.id16451.largetrue.diff (442 KB)

D6394.id16451.largetrue.diffNo OneTemporaryActions

D6394.id16451.largetrue.diffView Options

File Metadata

Event Timeline

D6394.id16451.largetrue.diff
No OneTemporary
Actions

D6394.id16451.largetrue.diff
View Options