D17955.id50296.diff
No OneTemporary
Actions

Size

534 KB

Referenced Files

None

Subscribers

None

D17955.id50296.diff
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.

	Index: sys/gnu/dts/mips/11ACNAS.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/11ACNAS.dts
	@@ -0,0 +1,27 @@
	+/dts-v1/;
	+
	+#include "W2914NSV2.dtsi"
	+
	+/ {
	+ compatible = "wevo,11acnas", "wevo,w2914ns-v2", "mediatek,mt7621-soc";
	+ model = "WeVO 11AC NAS Router";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ // Only USB LED is connected to GPIO.
	+ // All of other LEDs are connected directly to
	+ // switch, WiFi chip, Vcc, so they are not controllable
	+ // via GPIO
	+
	+ usb {
	+ label = "11acnas:green:usb";
	+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/3G-6200N.dts
	===================================================================
	--- sys/gnu/dts/mips/3G-6200N.dts
	+++ sys/gnu/dts/mips/3G-6200N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "3G-6200N", "ralink,rt3050-soc";
	+ compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
	model = "Edimax 3g-6200n";

	cfi@1f000000 {
	@@ -49,17 +52,17 @@

	power {
	label = "3g-6200n:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "3g-6200n:amber:wlan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "3g-6200n:blue:3g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -69,16 +72,16 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x211>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	- wlanswitch {
	+ rfkill {
	label = "wlanswitch";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	Index: sys/gnu/dts/mips/3G-6200NL.dts
	===================================================================
	--- sys/gnu/dts/mips/3G-6200NL.dts
	+++ sys/gnu/dts/mips/3G-6200NL.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "3G-6200NL", "ralink,rt3050-soc";
	+ compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
	model = "Edimax 3g-6200nl";

	cfi@1f000000 {
	@@ -47,9 +50,14 @@
	gpio-leds {
	compatible = "gpio-leds";

	+ internet {
	+ label = "3g-6200nl:green:internet";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	wlan {
	- label = "3g-6200nl:amber:wlan";
	- gpios = <&gpio0 14 1>;
	+ label = "3g-6200nl:green:wlan";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -59,10 +67,10 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x211>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -81,7 +89,7 @@
	};

	&esw {
	- mediatek,portmap = <0x2f>;
	+ mediatek,portdisable = <0x37>;
	};

	&wmac {
	Index: sys/gnu/dts/mips/3G150B.dts
	===================================================================
	--- sys/gnu/dts/mips/3G150B.dts
	+++ sys/gnu/dts/mips/3G150B.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "3G150B", "ralink,rt5350-soc";
	+ compatible = "tenda,3g150b", "ralink,rt5350-soc";
	model = "Tenda 3G150B";

	gpio-leds {
	@@ -11,12 +14,12 @@

	ap {
	label = "3g150b:blue:ap";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "3g150b:blue:3g";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -40,7 +43,7 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/3G300M.dts
	===================================================================
	--- sys/gnu/dts/mips/3G300M.dts
	+++ sys/gnu/dts/mips/3G300M.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "3G300M", "ralink,rt3052-soc";
	+ compatible = "tenda,3g300m", "ralink,rt3052-soc";
	model = "Tenda 3G300M";

	gpio-leds {
	@@ -11,32 +14,32 @@

	3grouter {
	label = "3g300m:blue:3grouter";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	ap {
	label = "3g300m:blue:ap";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wisprouter {
	label = "3g300m:blue:wisprouter";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wirelessrouter {
	label = "3g300m:blue:wirelessrouter";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "3g300m:blue:3g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wpsreset {
	label = "3g300m:blue:wpsreset";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -48,14 +51,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	@@ -68,7 +71,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/A5-V11.dts
	===================================================================
	--- sys/gnu/dts/mips/A5-V11.dts
	+++ sys/gnu/dts/mips/A5-V11.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "A5-V11", "ralink,rt5350-soc";
	+ compatible = "unbranded,a5-v11", "ralink,rt5350-soc";
	model = "A5-V11";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "a5-v11:blue:system";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "a5-v11:red:power";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -40,13 +43,13 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	root_hub {
	gpio-export,name = "root_hub";
	gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -59,7 +62,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "pm25lq032";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/AC1200RM.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/AC1200RM.dts
	@@ -0,0 +1,176 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * 1. Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * 2. Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in the
	+ * documentation and/or other materials provided with the distribution.
	+ * 3. Neither the names of the copyright holders nor the names of any
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc";
	+ model = "ALFA Network AC1200RM";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wlan2g {
	+ label = "ac1200rm:green:wlan2g";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "ac1200rm:green:wps";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+
	+ led {
	+ led-sources = <2>;
	+ led-active-low;
	+ };
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "nd_sd", "spi refclk", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x1000>;
	+ };
	+
	+ partition@031000 {
	+ label = "config";
	+ reg = <0x31000 0xf000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: sys/gnu/dts/mips/AI-BR100.dts
	===================================================================
	--- sys/gnu/dts/mips/AI-BR100.dts
	+++ sys/gnu/dts/mips/AI-BR100.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AI-BR100", "ralink,mt7620a-soc";
	+ compatible = "aigale,ai-br100", "ralink,mt7620a-soc";
	model = "Aigale Ai-BR100";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wan {
	label = "ai-br100:blue:wan";
	- gpios = <&gpio2 4 1>;
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "ai-br100:blue:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -50,7 +53,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0 0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -96,8 +98,6 @@
	};

	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "llllw";
	};
	Index: sys/gnu/dts/mips/AIR3GII.dts
	===================================================================
	--- sys/gnu/dts/mips/AIR3GII.dts
	+++ sys/gnu/dts/mips/AIR3GII.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AIR3GII", "ralink,rt5350-soc";
	+ compatible = "airlive,air3gii", "ralink,rt5350-soc";
	model = "AirLive Air3GII";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wlan {
	label = "air3gii:green:wlan";
	- gpios = <&gpio0 8 0>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	};

	mobile {
	label = "air3gii:green:mobile";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -46,7 +49,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q32b";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ALL0239-3G.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL0239-3G.dts
	+++ sys/gnu/dts/mips/ALL0239-3G.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ALL0239-3G", "ralink,rt3052-soc";
	+ compatible = "allnet,all0239-3g", "ralink,rt3052-soc";
	model = "Allnet ALL0239-3G";


	@@ -44,22 +47,22 @@

	usb {
	label = "all0239-3g:green:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "all0239-3g:green:3g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "all0239-3g:green:status";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "all0239-3g:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -71,20 +74,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	connect {
	label = "connect";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0xda>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_CONNECT>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ALL0256N-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL0256N-4M.dts
	+++ sys/gnu/dts/mips/ALL0256N-4M.dts
	@@ -1,46 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "ALL0256N.dtsi"

	/ {
	- compatible = "ALL0256N", "ralink,rt3050-soc";
	- model = "Allnet ALL0256N";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- rssilow {
	- label = "all0256n:green:rssilow";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- rssimed {
	- label = "all0256n:green:rssimed";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- rssihigh {
	- label = "all0256n:green:rssihigh";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	- };
	-};
	-
	-&gpio0 {
	- status = "okay";
	+ compatible = "allnet,all0256n-4m", "allnet,all0256n", "ralink,rt3050-soc";
	+ model = "Allnet ALL0256N (4M)";
	};

	&spi0 {
	@@ -51,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -78,24 +41,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x3f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/ALL0256N-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL0256N-8M.dts
	+++ sys/gnu/dts/mips/ALL0256N-8M.dts
	@@ -1,46 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "ALL0256N.dtsi"

	/ {
	- compatible = "ALL0256N", "ralink,rt3050-soc";
	- model = "Allnet ALL0256N";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- rssilow {
	- label = "all0256n:green:rssilow";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- rssimed {
	- label = "all0256n:green:rssimed";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- rssihigh {
	- label = "all0256n:green:rssihigh";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	- };
	-};
	-
	-&gpio0 {
	- status = "okay";
	+ compatible = "allnet,all0256n-8m", "allnet,all0256n", "ralink,rt3050-soc";
	+ model = "Allnet ALL0256N (8M)";
	};

	&spi0 {
	@@ -51,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -78,24 +41,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x3f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/ALL0256N.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ALL0256N.dtsi
	@@ -0,0 +1,65 @@
	+#include "rt3050.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "allnet,all0256n", "ralink,rt3050-soc";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ rssilow {
	+ label = "all0256n:green:rssilow";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ rssimed {
	+ label = "all0256n:green:rssimed";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ rssihigh {
	+ label = "all0256n:green:rssihigh";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	Index: sys/gnu/dts/mips/ALL5002.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL5002.dts
	+++ sys/gnu/dts/mips/ALL5002.dts
	@@ -2,13 +2,19 @@

	#include "rt3352.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ALL5002", "ralink,rt3352-soc";
	+ compatible = "allnet,all5002", "ralink,rt3352-soc";
	model = "Allnet ALL5002";

	i2c-gpio {
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	compatible = "i2c-gpio";
	- gpios = <&gpio0 1 0 &gpio0 2 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
	i2c-gpio,delay-us = <10>;

	pcf0: iexp@38 {
	@@ -29,12 +35,12 @@

	ld1 {
	label = "all5002:green:ld1";
	- gpios = <&pcf0 0 1>;
	+ gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
	};

	ld2 {
	label = "all5002:green:ld2";
	- gpios = <&pcf0 1 1>;
	+ gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -51,7 +57,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ALL5003.dts
	===================================================================
	--- sys/gnu/dts/mips/ALL5003.dts
	+++ sys/gnu/dts/mips/ALL5003.dts
	@@ -2,13 +2,19 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ALL5003", "ralink,rt5350-soc";
	+ compatible = "allnet,all5003", "ralink,rt5350-soc";
	model = "Allnet ALL5003";

	i2c-gpio {
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	compatible = "i2c-gpio";
	- gpios = <&gpio0 1 0 &gpio0 2 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
	i2c-gpio,delay-us = <10>;

	pcf0: iexp@38 {
	@@ -29,12 +35,12 @@

	ld1 {
	label = "all5003:green:ld1";
	- gpios = <&pcf0 0 1>;
	+ gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
	};

	ld2 {
	label = "all5003:green:ld2";
	- gpios = <&pcf0 1 1>;
	+ gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -51,7 +57,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/AP-MT7621A-V60.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/AP-MT7621A-V60.dts
	@@ -0,0 +1,127 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+/ {
	+ compatible = "mediatek,ap-mt7621a-v60", "mediatek,mt7621-soc";
	+ model = "Mediatek AP-MT7621A-V60 EVB";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ sound {
	+ compatible = "simple-audio-card";
	+ simple-audio-card,name = "Audio-I2S";
	+ simple-audio-card,format = "i2s";
	+ simple-audio-card,bitclock-master = <&dailink0_master>;
	+ simple-audio-card,frame-master = <&dailink0_master>;
	+ simple-audio-card,widgets =
	+ "Microphone", "Microphone Jack",
	+ "Headphone", "Headphone Jack";
	+ simple-audio-card,routing =
	+ "LINPUT1", "Microphone Jack",
	+ "RINPUT1", "Microphone Jack",
	+ "Headphone Jack", "HP_L",
	+ "Headphone Jack", "HP_R";
	+ simple-audio-card,mclk-fs = <256>;
	+
	+ simple-audio-card,cpu {
	+ sound-dai = <&i2s>;
	+ };
	+
	+ dailink0_master: simple-audio-card,codec {
	+ sound-dai = <&codec>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart2", "rgmii2";
	+ ralink,function = "gpio";
	+ };
	+ };
	+ i2s_pins: i2s {
	+ i2s {
	+ ralink,group = "uart3";
	+ ralink,function = "i2s";
	+ };
	+ };
	+};
	+
	+&i2c {
	+ status = "okay";
	+
	+ codec: wm8960@1a {
	+ #sound-dai-cells = <0>;
	+ compatible = "wlf,wm8960";
	+ reg = <0x1a>;
	+ wlf,shared-lrclk;
	+ };
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&i2s {
	+ #sound-dai-cells = <0>;
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2s_pins>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ mx25l6405d@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "mx25l6405d","jedec,spi-nor";
	+ reg = <0 0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x5>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/AR670W.dts
	===================================================================
	--- sys/gnu/dts/mips/AR670W.dts
	+++ sys/gnu/dts/mips/AR670W.dts
	@@ -2,8 +2,11 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AR670W", "ralink,rt2880-soc";
	+ compatible = "airlink101,ar670w", "ralink,rt2880-soc";
	model = "Airlink101 AR670W";

	cfi@bdc00000 {
	@@ -36,12 +39,12 @@

	status {
	label = "ar670w:green:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wpsblue {
	label = "ar670w:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,14 +56,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/AR725W.dts
	===================================================================
	--- sys/gnu/dts/mips/AR725W.dts
	+++ sys/gnu/dts/mips/AR725W.dts
	@@ -2,8 +2,11 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AR725W", "ralink,rt2880-soc";
	+ compatible = "airlink101,ar725w", "ralink,rt2880-soc";
	model = "Airlink101 AR725W";

	cfi@bdc00000 {
	@@ -41,17 +44,17 @@

	status {
	label = "ar725w:green:power";
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	wpsred {
	label = "ar725w:red:wps";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	wpsblue {
	label = "ar725w:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -63,14 +66,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ASL26555-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/ASL26555-16M.dts
	+++ sys/gnu/dts/mips/ASL26555-16M.dts
	@@ -1,77 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "ASL26555.dtsi"

	/ {
	- compatible = "ASL26555", "ralink,rt3050-soc";
	- model = "Alpha ASL26555";
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 0>;
	- linux,code = <0x198>;
	- };
	-
	- wps {
	- label = "wps";
	- gpios = <&gpio0 12 0>;
	- linux,code = <0x211>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- eth {
	- label = "asl26555:green:eth";
	- gpios = <&gpio0 0 1>;
	- };
	-
	- wan-red {
	- label = "asl26555:red:wan";
	- gpios = <&gpio0 1 0>;
	- };
	-
	- wan-green {
	- label = "asl26555:green:wan";
	- gpios = <&gpio0 2 0>;
	- };
	-
	- wlan {
	- label = "asl26555:green:wlan";
	- gpios = <&gpio0 7 0>;
	- };
	-
	- power-green {
	- label = "asl26555:green:power";
	- gpios = <&gpio0 8 0>;
	- };
	-
	- power-red {
	- label = "asl26555:red:power";
	- gpios = <&gpio0 9 0>;
	- };
	-
	- 3g-green {
	- label = "asl26555:green:3g";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- 3g-red {
	- label = "asl26555:red:3g";
	- gpios = <&gpio0 17 1>;
	- };
	- };
	-};
	-
	-&gpio0 {
	- status = "okay";
	+ compatible = "alphanetworks,asl26555-16m", "alphanetworks,asl26555", "ralink,rt3050-soc";
	+ model = "Alpha ASL26555 (16M)";
	};

	&spi0 {
	@@ -82,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25sl12801";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -127,28 +59,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&devdata 0x4004>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x1e>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	-};
	-
	-&otg {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/ASL26555-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/ASL26555-8M.dts
	+++ sys/gnu/dts/mips/ASL26555-8M.dts
	@@ -1,77 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "ASL26555.dtsi"

	/ {
	- compatible = "ASL26555", "ralink,rt3050-soc";
	- model = "Alpha ASL26555";
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 0>;
	- linux,code = <0x198>;
	- };
	-
	- wps {
	- label = "wps";
	- gpios = <&gpio0 12 0>;
	- linux,code = <0x211>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- eth {
	- label = "asl26555:green:eth";
	- gpios = <&gpio0 0 1>;
	- };
	-
	- wan-red {
	- label = "asl26555:red:wan";
	- gpios = <&gpio0 1 0>;
	- };
	-
	- wan-green {
	- label = "asl26555:green:wan";
	- gpios = <&gpio0 2 0>;
	- };
	-
	- wlan {
	- label = "asl26555:green:wlan";
	- gpios = <&gpio0 7 0>;
	- };
	-
	- power-green {
	- label = "asl26555:green:power";
	- gpios = <&gpio0 8 0>;
	- };
	-
	- power-red {
	- label = "asl26555:red:power";
	- gpios = <&gpio0 9 0>;
	- };
	-
	- 3g-green {
	- label = "asl26555:green:3g";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- 3g-red {
	- label = "asl26555:red:3g";
	- gpios = <&gpio0 17 1>;
	- };
	- };
	-};
	-
	-&gpio0 {
	- status = "okay";
	+ compatible = "alphanetworks,asl26555-8m", "alphanetworks,asl26555", "ralink,rt3050-soc";
	+ model = "Alpha ASL26555 (8M)";
	};

	&spi0 {
	@@ -82,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25sl064p";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -91,7 +23,7 @@
	read-only;
	};

	- ubootenv: partition@30000 {
	+ devdata: partition@30000 {
	label = "uboot-env";
	reg = <0x30000 0x10000>;
	read-only;
	@@ -121,28 +53,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&ubootenv 0x4004>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x1e>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&ubootenv 0x4000>;
	-};
	-
	-&otg {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/ASL26555.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ASL26555.dtsi
	@@ -0,0 +1,100 @@
	+#include "rt3050.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "alphanetworks,asl26555", "ralink,rt3050-soc";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ eth {
	+ label = "asl26555:green:eth";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan-red {
	+ label = "asl26555:red:wan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wan-green {
	+ label = "asl26555:green:wan";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wlan {
	+ label = "asl26555:green:wlan";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power-green {
	+ label = "asl26555:green:power";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power-red {
	+ label = "asl26555:red:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ 3g-green {
	+ label = "asl26555:green:3g";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ 3g-red {
	+ label = "asl26555:red:3g";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&devdata 0x4004>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x1e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&devdata 0x4000>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/ATP-52B.dts
	===================================================================
	--- sys/gnu/dts/mips/ATP-52B.dts
	+++ sys/gnu/dts/mips/ATP-52B.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ATP-52B", "ralink,rt3052-soc";
	+ compatible = "argus,atp-52b", "ralink,rt3052-soc";
	model = "Argus ATP-52B";

	cfi@1f000000 {
	@@ -41,12 +44,12 @@

	run {
	label = "atp-52b:green:run";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	net {
	label = "atp-52b:amber:net";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -58,14 +61,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/AWAPN2403.dts
	===================================================================
	--- sys/gnu/dts/mips/AWAPN2403.dts
	+++ sys/gnu/dts/mips/AWAPN2403.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "AWAPN2403", "ralink,rt3052-soc";
	+ compatible = "asiarf,awapn2403", "ralink,rt3052-soc";
	model = "AsiaRF AWAPN2403";

	gpio-leds {
	@@ -11,7 +14,7 @@

	link {
	label = "awapn2403:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,7 +40,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/AWM002-4M.dtsi
	===================================================================
	--- sys/gnu/dts/mips/AWM002-4M.dtsi
	+++ /dev/null
	@@ -1,11 +0,0 @@
	-#include "AWM002.dtsi"
	-
	-/ {
	- compatible = "AWM002", "ralink,rt5350-soc";
	- model = "AsiaRF AWM002";
	-};
	-
	-&m25p80 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l3205d";
	-};
	Index: sys/gnu/dts/mips/AWM002-8M.dtsi
	===================================================================
	--- sys/gnu/dts/mips/AWM002-8M.dtsi
	+++ /dev/null
	@@ -1,11 +0,0 @@
	-#include "AWM002.dtsi"
	-
	-/ {
	- compatible = "AWM002", "ralink,rt5350-soc";
	- model = "AsiaRF AWM002";
	-};
	-
	-&m25p80 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l6405d";
	-};
	Index: sys/gnu/dts/mips/AWM002-EVB-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/AWM002-EVB-4M.dts
	+++ sys/gnu/dts/mips/AWM002-EVB-4M.dts
	@@ -1,53 +1,43 @@
	/dts-v1/;

	-#include "AWM002-4M.dtsi"
	+#include "AWM002-EVB.dtsi"

	/ {
	- model = "AsiaRF AWM002 EVB";
	+ compatible = "asiarf,awm002-evb-4m", "ralink,rt5350-soc";
	+ model = "AsiaRF AWM002 EVB (4M)";
	+};

	- gpio-leds {
	- compatible = "gpio-leds";
	+&spi0 {
	+ status = "okay";

	- tx {
	- label = "awm002-evb:green:tx";
	- gpios = <&gpio0 15 1>;
	+ m25p80: m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ reg = <0>;
	+ compatible = "jedec,spi-nor";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- rx {
	- label = "awm002-evb:green:rx";
	- gpios = <&gpio0 16 1>;
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};

	- wps {
	- label = "awm002-evb:green:wps";
	- gpios = <&gpio0 21 1>;
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	};
	- };

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 20 1>;
	- linux,code = <0x32>;
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3b0000>;
	};
	};
	};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/AWM002-EVB-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/AWM002-EVB-8M.dts
	+++ sys/gnu/dts/mips/AWM002-EVB-8M.dts
	@@ -1,53 +1,43 @@
	/dts-v1/;

	-#include "AWM002-8M.dtsi"
	+#include "AWM002-EVB.dtsi"

	/ {
	- model = "AsiaRF AWM002 EVB";
	+ compatible = "asiarf,awm002-evb-8m", "ralink,rt5350-soc";
	+ model = "AsiaRF AWM002 EVB (8M)";
	+};

	- gpio-leds {
	- compatible = "gpio-leds";
	+&spi0 {
	+ status = "okay";

	- tx {
	- label = "awm002-evb:green:tx";
	- gpios = <&gpio0 15 1>;
	+ m25p80: m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ reg = <0>;
	+ compatible = "jedec,spi-nor";
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	};

	- rx {
	- label = "awm002-evb:green:rx";
	- gpios = <&gpio0 16 1>;
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	};

	- wps {
	- label = "awm002-evb:green:wps";
	- gpios = <&gpio0 21 1>;
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	};
	- };

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 20 1>;
	- linux,code = <0x32>;
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};
	};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/AWM002-EVB.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/AWM002-EVB.dtsi
	@@ -0,0 +1,75 @@
	+#include "rt5350.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "asiarf,awm002-evb", "ralink,rt5350-soc";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ tx {
	+ label = "awm002-evb:green:tx";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ rx {
	+ label = "awm002-evb:green:rx";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "awm002-evb:green:wps";
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset_wps {
	+ label = "reset_wps";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ mode {
	+ label = "mode";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3f>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/AWM002.dtsi
	===================================================================
	--- sys/gnu/dts/mips/AWM002.dtsi
	+++ /dev/null
	@@ -1,76 +0,0 @@
	-#include "rt5350.dtsi"
	-
	-/ {
	- compatible = "AWM002", "ralink,rt5350-soc";
	- model = "AsiaRF AWM002";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- ld1 {
	- label = "awm002:green:ld1";
	- gpios = <&gpio0 0 1>;
	- };
	-
	- ld2 {
	- label = "awm002:green:ld2";
	- gpios = <&gpio0 1 1>;
	- };
	- };
	-};
	-
	-&spi0 {
	- status = "okay";
	-
	- m25p80: m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- reg = <0>;
	- compatible = "jedec,spi-nor";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&esw {
	- mediatek,portmap = <0x3f>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/AWM003-EVB.dts
	===================================================================
	--- sys/gnu/dts/mips/AWM003-EVB.dts
	+++ /dev/null
	@@ -1,64 +0,0 @@
	-/dts-v1/;
	-
	-#include "AWM002-8M.dtsi"
	-
	-/ {
	- compatible = "AWM003", "ralink,rt5350-soc";
	- model = "AsiaRF AWM003 EVB";
	-
	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x4000000>;
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- tx {
	- label = "awm003-evb:green:tx";
	- gpios = <&gpio0 15 1>;
	- };
	-
	- rx {
	- label = "awm003-evb:green:rx";
	- gpios = <&gpio0 16 1>;
	- };
	-
	- wps {
	- label = "awm003-evb:green:wps";
	- gpios = <&gpio0 21 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 20 1>;
	- linux,code = <0x32>;
	- };
	- };
	-};
	-
	-&m25p80 {
	- compatible = "jedec,spi-nor";
	- linux,modalias = "m25p80", "mx25l6405d";
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/AWUSFREE1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/AWUSFREE1.dts
	@@ -0,0 +1,164 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * 1. Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * 2. Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in the
	+ * documentation and/or other materials provided with the distribution.
	+ * 3. Neither the names of the copyright holders nor the names of any
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "alfa-network,awusfree1", "mediatek,mt7628an-soc";
	+ model = "ALFA Network AWUSFREE1";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ system {
	+ label = "awusfree1:orange:system";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "awusfree1:blue:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+};
	+
	+&ehci {
	+ status = "disabled";
	+};
	+
	+&esw {
	+ mediatek,portdisable = <0x1e>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x2e>;
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "disabled";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "p0led_an", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+
	+ ext_lna {
	+ ralink,group = "uart1";
	+ ralink,function = "sw_r";
	+ };
	+
	+ ext_pa {
	+ ralink,group = "i2s";
	+ ralink,function = "antenna";
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x1000>;
	+ };
	+
	+ partition@031000 {
	+ label = "config";
	+ reg = <0x31000 0xf000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ mediatek,mtd-eeprom = <&factory 0x0>;
	+};
	Index: sys/gnu/dts/mips/ArcherC20i.dts
	===================================================================
	--- sys/gnu/dts/mips/ArcherC20i.dts
	+++ sys/gnu/dts/mips/ArcherC20i.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "tplink,c20i", "ralink,mt7620a-soc";
	model = "TP-Link Archer C20i";

	chosen {
	@@ -12,20 +15,57 @@

	gpio-leds {
	compatible = "gpio-leds";
	+ lan {
	+ label = "c20i:blue:lan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+ usb {
	+ label = "c20i:blue:usb";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+ wps {
	+ label = "c20i:blue:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+ wan {
	+ label = "c20i:blue:wan";
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	+ };
	+ wlan {
	+ label = "c20i:blue:wlan";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	};

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	+ gpio-keys {
	+ compatible = "gpio-keys";
	#address-cells = <1>;
	#size-cells = <0>;
	- poll-interval = <20>;
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ reset_wps {
	+ label = "reset_wps";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	&gpio2 {
	status = "okay";
	};

	+&gpio3 {
	+ status = "okay";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -34,7 +74,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -73,7 +112,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
	ralink,function = "gpio";
	};
	};
	@@ -81,7 +120,6 @@

	&ethernet {
	pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&rom 0xf100>;
	mediatek,portmap = "wllll";
	};
	@@ -110,7 +148,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&radio 32768>;
	- mediatek,2ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ArcherC20v1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherC20v1.dts
	@@ -0,0 +1,188 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "tplink,c20-v1", "ralink,mt7620a-soc";
	+ model = "TP-Link Archer C20 v1";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "c20-v1:blue:lan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "c20-v1:blue:power";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ default-state = "keep";
	+ };
	+
	+ usb {
	+ label = "c20-v1:blue:usb";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "c20-v1:blue:wan";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wan_orange {
	+ label = "c20-v1:orange:wan";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wlan5g {
	+ label = "c20-v1:blue:wlan5g";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan2g {
	+ label = "c20-v1:blue:wlan2g";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "c20-v1:blue:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7a0000>;
	+ };
	+
	+ partition@7c0000 {
	+ label = "config";
	+ reg = <0x7c0000 0x10000>;
	+ read-only;
	+ };
	+
	+ rom: partition@7d0000 {
	+ label = "rom";
	+ reg = <0x7d0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7e0000 {
	+ label = "romfile";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ mtd-mac-address = <&rom 0xf100>;
	+ mediatek,portmap = "wllll";
	+ };
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&radio 0>;
	+ mtd-mac-address = <&rom 0xf100>;
	+ mtd-mac-address-increment = <(-2)>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&rom 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/ArcherC20v4.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherC20v4.dts
	@@ -0,0 +1,101 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "tplink,c20-v4", "mediatek,mt7628an-soc";
	+ model = "TP-Link Archer C20 v4";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "c20-v4:green:lan";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "c20-v4:green:power";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "c20-v4:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_orange {
	+ label = "c20-v4:orange:wan";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan5g {
	+ label = "c20-v4:green:wlan5g";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan2g {
	+ label = "c20-v4:green:wlan2g";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "c20-v4:green:wps";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ mtd-mac-address-increment = <(-2)>;
	+};
	+
	+&ethernet {
	+ mediatek,portmap = "wllll";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x28000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&factory 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/ArcherC50.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherC50.dts
	@@ -0,0 +1,187 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "tplink,c50", "ralink,mt7620a-soc";
	+ model = "TP-Link Archer C50";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "c50:green:lan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "c50:green:power";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ default-state = "on";
	+ };
	+
	+ usb {
	+ label = "c50:green:usb";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "c50:green:wan";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_orange {
	+ label = "c50:orange:wan";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan5g {
	+ label = "c50:green:wlan5g";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan2g {
	+ label = "c50:green:wlan2g";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "c50:green:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ }; };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7a0000>;
	+ };
	+
	+ partition@7c0000 {
	+ label = "config";
	+ reg = <0x7c0000 0x10000>;
	+ read-only;
	+ };
	+
	+ rom: partition@7d0000 {
	+ label = "rom";
	+ reg = <0x7d0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7e0000 {
	+ label = "romfile";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ mtd-mac-address = <&rom 0xf100>;
	+ mediatek,portmap = "wllll";
	+ };
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&radio 0>;
	+ mtd-mac-address = <&rom 0xf100>;
	+ mtd-mac-address-increment = <(-2)>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 32768>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&rom 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/ArcherC50V3.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherC50V3.dts
	@@ -0,0 +1,94 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,c50-v3", "mediatek,mt7628an-soc";
	+ model = "TP-Link Archer C50 v3";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "c50-v3:green:lan";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "c50-v3:green:power";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "c50-v3:green:wan";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_orange {
	+ label = "c50-v3:orange:wan";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "c50-v3:green:wlan2g";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan5 {
	+ label = "c50-v3:green:wlan5g";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "c50-v3:green:wps";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an",
	+ "p3led_an", "p4led_an", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x28000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&factory 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/ArcherMR200.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ArcherMR200.dts
	@@ -0,0 +1,194 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,mr200", "ralink,mt7620a-soc";
	+ model = "TP-Link Archer MR200";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "mr200:white:lan";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "mr200:white:wan";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "mr200:white:power";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ 4g {
	+ label = "mr200:white:4g";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "mr200:white:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ signal1 {
	+ label = "mr200:white:signal1";
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ signal2 {
	+ label = "mr200:white:signal2";
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ signal3 {
	+ label = "mr200:white:signal3";
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ signal4 {
	+ label = "mr200:white:signal4";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "mr200:white:wlan";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys {
	+ compatible = "gpio-keys";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ power_usb {
	+ gpio-export,name = "power_usb1";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7b0000>;
	+ };
	+
	+ rom: partition@7d0000 {
	+ label = "rom";
	+ reg = <0x7d0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7e0000 {
	+ label = "romfile";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&rom 0xf100>;
	+ mediatek,portmap = "llll";
	+ };
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&radio 0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 32768>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/BC2.dts
	===================================================================
	--- sys/gnu/dts/mips/BC2.dts
	+++ sys/gnu/dts/mips/BC2.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "BC2", "ralink,rt3052-soc";
	+ compatible = "nexaira,bc2", "ralink,rt3052-soc";
	model = "NexAira BC2";

	cfi@1f000000 {
	@@ -43,7 +46,7 @@

	usb {
	label = "bc2:blue:usb";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -55,8 +58,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 17 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/BOCCO.dts
	===================================================================
	--- sys/gnu/dts/mips/BOCCO.dts
	+++ sys/gnu/dts/mips/BOCCO.dts
	@@ -2,29 +2,12 @@

	#include "mt7620a.dtsi"

	-/ {
	- compatible = "ralink,mt7620a-soc";
	- model = "Planex CS-QR10";
	-
	- sound {
	- compatible = "mediatek,mt7620-audio-wm8960";
	- model = "mt7620-wm8960";
	- i2s-controller = <&i2s>;
	- audio-routing =
	- "Ext Spk", "SPK_LP",
	- "Ext Spk", "SPK_LN",
	- "Ext Spk", "SPK_RP",
	- "Ext Spk", "SPK_RN";
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	- power {
	- label = "cs-qr10:red:power";
	- gpios = <&gpio1 4 1>;
	- };
	- };
	+/ {
	+ compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
	+ model = "YUKAI Engineering BOCCO";

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -32,16 +15,46 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- s1 {
	+ reset {
	label = "reset";
	- gpios = <&gpio1 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;

	+ s1 {
	+ gpio-export,name = "rec";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
	+ };
	s2 {
	- label = "wps";
	- gpios = <&gpio1 3 1>;
	- linux,code = <0x211>;
	+ gpio-export,name = "play";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ sound {
	+ compatible = "simple-audio-card";
	+ simple-audio-card,name = "Audio-I2S";
	+ simple-audio-card,format = "i2s";
	+ simple-audio-card,bitclock-master = <&dailink0_master>;
	+ simple-audio-card,frame-master = <&dailink0_master>;
	+ simple-audio-card,widgets =
	+ "Headphone", "Headphones";
	+ simple-audio-card,routing =
	+ "Headphones", "HP_L",
	+ "Headphones", "HP_R";
	+ simple-audio-card,mclk-fs = <256>;
	+
	+ simple-audio-card,cpu {
	+ sound-dai = <&i2s>;
	+ };
	+
	+ dailink0_master: simple-audio-card,codec {
	+ sound-dai = <&codec>;
	};
	};
	};
	@@ -64,9 +77,18 @@

	&i2c {
	status = "okay";
	+
	+ codec: wm8960@1a {
	+ #sound-dai-cells = <0>;
	+ compatible = "wlf,wm8960";
	+ reg = <0x1a>;
	+
	+ wlf,shared-lrclk;
	+ };
	};

	&i2s {
	+ #sound-dai-cells = <0>;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pcm_i2s_pins>;
	@@ -80,7 +102,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -122,10 +143,6 @@
	ralink,group = "spi refclk", "rgmii1";
	ralink,function = "gpio";
	};
	- wdt {
	- ralink,group = "wdt";
	- ralink,function = "wdt refclk";
	- };
	};
	};

	@@ -140,22 +157,6 @@
	ralink,port4 = "ephy";
	};

	-&sdhci {
	- status = "okay";
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-
	-&pcie {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/BR-6425.dts
	===================================================================
	--- sys/gnu/dts/mips/BR-6425.dts
	+++ /dev/null
	@@ -1,71 +0,0 @@
	-/dts-v1/;
	-
	-#include "rt3050.dtsi"
	-
	-/ {
	- compatible = "BR-6425", "ralink,rt3052-soc";
	- model = "Edimax BR-6425";
	-
	- cfi@1f000000 {
	- compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	- bank-width = <2>;
	- device-width = <2>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "br-6425:green:power";
	- gpios = <&gpio0 9 1>;
	- };
	-
	- wlan {
	- label = "br-6425:orange:wlan";
	- gpios = <&gpio0 14 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	- };
	-
	- rfkill {
	- label = "RFKILL switch";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0xf7>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	-/* mtd-mac-address = <&factory 0x4>; */
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	-};
	-
	-&wmac {
	-/* ralink,mtd-eeprom = <&factory 0>; */
	-};
	Index: sys/gnu/dts/mips/BR-6475ND.dts
	===================================================================
	--- sys/gnu/dts/mips/BR-6475ND.dts
	+++ sys/gnu/dts/mips/BR-6475ND.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "BR-6475ND", "ralink,rt3883-soc";
	+ compatible = "edimax,br-6475nd", "ralink,rt3883-soc";
	model = "Edimax BR-6475nD";

	gpio-keys-polled {
	@@ -14,15 +17,15 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	rfkill {
	label = "rfkill";
	- gpios = <&gpio0 9 1>;
	- linux,input-type = <5>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,input-type = <EV_SW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};

	@@ -31,17 +34,17 @@

	power {
	label = "br-6475nd:green:power";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "br-6475nd:amber:wlan";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	wlan_5ghz {
	label = "br-6475nd:amber:wlan_5ghz";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -80,17 +83,12 @@
	reg = <0x00070000 0x00790000>;
	label = "firmware";
	};
	-
	- partition@170000 {
	- reg = <0x00270000 0x00590000>;
	- label = "rootfs";
	- };
	};

	rtl8367 {
	compatible = "realtek,rtl8367";
	- gpio-sda = <&gpio0 5 0>;
	- gpio-sck = <&gpio0 4 0>;
	+ gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
	realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
	};

	@@ -105,7 +103,7 @@
	usb {
	gpio-export,name="usb";
	gpio-export,output=<0>;
	- gpios = <&gpio0 19 0>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};
	*/
	@@ -162,11 +160,11 @@
	pci-bridge@1 {
	status = "okay";

	- wmac@0,0 {
	+ wifi@0,0 {
	+ compatible = "pci0,0";
	+ reg = <0x10000 0 0 0 0>;
	ralink,5ghz = <0>;
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/BROADWAY.dts
	===================================================================
	--- sys/gnu/dts/mips/BROADWAY.dts
	+++ sys/gnu/dts/mips/BROADWAY.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "BROADWAY", "ralink,rt3052-soc";
	+ compatible = "hauppauge,broadway", "ralink,rt3052-soc";
	model = "Hauppauge Broadway";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	diskmounted {
	label = "broadway:red:diskmounted";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps_active {
	label = "broadway:red:wps_active";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	factory {
	label = "Factory Reset button";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/C108.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/C108.dts
	@@ -0,0 +1,177 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "hnet,c108", "ralink,mt7620a-soc";
	+ model = "HNET C108";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ power_modem {
	+ gpio-export,name = "power_modem";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ sdcard {
	+ label = "c108:green:sdcard";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ modem_green {
	+ label = "c108:green:modem";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ modem_red {
	+ label = "c108:red:modem";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan_red {
	+ label = "c108:red:lan";
	+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ lan_green {
	+ label = "c108:green:lan";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ en25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "spi refclk", "ephy";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/CARAMBOLA.dts
	===================================================================
	--- sys/gnu/dts/mips/CARAMBOLA.dts
	+++ sys/gnu/dts/mips/CARAMBOLA.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "CARAMBOLA", "ralink,rt3050-soc";
	+ compatible = "8devices,carambola", "ralink,rt3050-soc";
	model = "8devices Carambola";

	chosen {
	@@ -44,7 +47,7 @@

	i2c-gpio {
	compatible = "i2c-gpio";
	- gpios = <&gpio0 1 0 &gpio0 2 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
	i2c-gpio,delay-us = <10>;
	};
	};
	Index: sys/gnu/dts/mips/CF-WR800N.dts
	===================================================================
	--- sys/gnu/dts/mips/CF-WR800N.dts
	+++ sys/gnu/dts/mips/CF-WR800N.dts
	@@ -2,8 +2,11 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "cf-wr800n", "ralink,mt7620n-soc";
	+ compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
	model = "Comfast CF-WR800N";

	chosen {
	@@ -15,17 +18,17 @@

	ethernet {
	label = "cf-wr800n:white:ethernet";
	- gpios = <&gpio2 4 1>;
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "cf-wr800n:white:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "cf-wr800n:white:wps";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +40,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -67,7 +70,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/CS-QR10.dts
	===================================================================
	--- sys/gnu/dts/mips/CS-QR10.dts
	+++ sys/gnu/dts/mips/CS-QR10.dts
	@@ -2,27 +2,19 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
	model = "Planex CS-QR10";

	- sound {
	- compatible = "mediatek,mt7620-audio-wm8960";
	- model = "mt7620-wm8960";
	- i2s-controller = <&i2s>;
	- audio-routing =
	- "Ext Spk", "SPK_LP",
	- "Ext Spk", "SPK_LN",
	- "Ext Spk", "SPK_RP",
	- "Ext Spk", "SPK_RN";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	power {
	label = "cs-qr10:red:power";
	- gpios = <&gpio1 4 1>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -34,14 +26,14 @@

	s1 {
	label = "reset";
	- gpios = <&gpio1 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	s2 {
	label = "wps";
	- gpios = <&gpio1 3 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -80,7 +72,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/CY-SWR1100.dts
	===================================================================
	--- sys/gnu/dts/mips/CY-SWR1100.dts
	+++ sys/gnu/dts/mips/CY-SWR1100.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "CY-SWR1100", "ralink,rt3883-soc";
	+ compatible = "samsung,cy-swr1100", "ralink,rt3883-soc";
	model = "Samsung CY-SWR1100";

	nor-flash@1c000000 {
	@@ -50,8 +53,8 @@

	rtl8367 {
	compatible = "realtek,rtl8367";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
	};

	@@ -63,14 +66,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 6 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 3 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -79,12 +82,12 @@

	wps {
	label = "cy-swr1100:blue:wps";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "cy-swr1100:blue:usb";
	- gpios = <&gpio1 1 1>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -125,11 +128,11 @@
	pci-bridge@1 {
	status = "okay";

	- wmac@0,0 {
	+ wifi@0,0 {
	+ compatible = "pci0,0";
	+ reg = <0x10000 0 0 0 0>;
	ralink,5ghz = <0>;
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ ralink,mtd-eeprom = <&factory 0x2000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/D105.dts
	===================================================================
	--- sys/gnu/dts/mips/D105.dts
	+++ sys/gnu/dts/mips/D105.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "D105", "ralink,rt3050-soc";
	+ compatible = "huawei,d105", "ralink,rt3050-soc";
	model = "Huawei D105";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	power {
	label = "d105:red:power";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "d105:green:usb";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/D240.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/D240.dts
	@@ -0,0 +1,179 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "sanlinking,d240", "ralink,mt7620a-soc";
	+ model = "Sanlinking Technologies D240";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ power_mpcie2 {
	+ gpio-export,name = "power_mpcie2";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power_mpcie1 {
	+ gpio-export,name = "power_mpcie1";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "d240:blue:power";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usb {
	+ label = "d240:blue:usb";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ air {
	+ label = "d240:blue:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ en25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/DAP-1350.dts
	===================================================================
	--- sys/gnu/dts/mips/DAP-1350.dts
	+++ sys/gnu/dts/mips/DAP-1350.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DAP-1350", "ralink,rt3052-soc";
	+ compatible = "dlink,dap-1350", "ralink,rt3052-soc";
	model = "D-Link DAP-1350";

	chosen {
	@@ -53,17 +56,17 @@

	power {
	label = "dap-1350:blue:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "dap-1350:red:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dap-1350:blue:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -75,26 +78,26 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	rt {
	label = "rt";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DAP-1522-A1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DAP-1522-A1.dts
	@@ -0,0 +1,139 @@
	+/dts-v1/;
	+
	+#include "rt2880.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dap-1522-a1", "ralink,rt2880-soc";
	+ model = "D-Link DAP-1522 A1";
	+
	+ cfi@bc400000 {
	+ compatible = "cfi-flash";
	+ reg = <0xbc400000 0x800000>;
	+ bank-width = <2>;
	+ device-width = <2>;
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+
	+ partition@0 {
	+ label = "uboot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ factory: partition@30000 {
	+ label = "factory";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0x3a0000>;
	+ };
	+ };
	+
	+ rtl8366s {
	+ compatible = "realtek,rtl8366s";
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <100>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ ap {
	+ label = "ap";
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	+ };
	+
	+ bridge {
	+ label = "bridge";
	+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	+ linux,input-type = <EV_SW>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wps {
	+ label = "dap-1522-a1:blue:wps";
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ ap {
	+ label = "dap-1522-a1:blue:ap";
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ sta {
	+ label = "dap-1522-a1:red:sta";
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status {
	+ label = "dap-1522-a1:blue:status";
	+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartlite", "pci";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x2004>;
	+
	+ port@0 {
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ phy-mode = "mii";
	+ reg = <0>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0x2000>;
	+};
	Index: sys/gnu/dts/mips/DB-WRT01.dts
	===================================================================
	--- sys/gnu/dts/mips/DB-WRT01.dts
	+++ sys/gnu/dts/mips/DB-WRT01.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,db-wrt01", "ralink,mt7620a-soc";
	model = "Planex DB-WRT01";

	gpio-leds {
	@@ -11,7 +14,7 @@

	power {
	label = "db-wrt01:orange:power";
	- gpios = <&gpio1 1 1>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	s1 {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -41,7 +44,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DCH-M225.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DCH-M225.dts
	@@ -0,0 +1,180 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
	+ model = "D-Link DCH-M225";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <100>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "dch-m225:green:power";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status {
	+ label = "dch-m225:red:status";
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ sound {
	+ compatible = "simple-audio-card";
	+ simple-audio-card,name = "Audio-I2S";
	+ simple-audio-card,format = "i2s";
	+ simple-audio-card,bitclock-master = <&dailink0_master>;
	+ simple-audio-card,frame-master = <&dailink0_master>;
	+ simple-audio-card,widgets =
	+ "Headphone", "Headphones";
	+ simple-audio-card,routing =
	+ "Headphones", "HP_L",
	+ "Headphones", "HP_R";
	+ simple-audio-card,mclk-fs = <256>;
	+ simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+
	+ simple-audio-card,cpu {
	+ sound-dai = <&i2s>;
	+ };
	+
	+ dailink0_master: simple-audio-card,codec {
	+ sound-dai = <&codec>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+
	+ codec: wm8960@1a {
	+ #sound-dai-cells = <0>;
	+ compatible = "wlf,wm8960";
	+ reg = <0x1a>;
	+
	+ wlf,shared-lrclk;
	+ };
	+};
	+
	+&i2s {
	+ #sound-dai-cells = <0>;
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&mdio_refclk_pins>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <80000000>;
	+ m25p,fast-read;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x4000>;
	+ read-only;
	+ };
	+
	+ factory: partition@34000 {
	+ label = "factory";
	+ reg = <0x34000 0x4000>;
	+ read-only;
	+ };
	+
	+ nvram: partition@38000 {
	+ label = "nvram";
	+ reg = <0x38000 0x8000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "devconf";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "upgrade_rec";
	+ reg = <0x50000 0x100000>;
	+ read-only;
	+ };
	+
	+ partition@150000 {
	+ label = "firmware";
	+ reg = <0x150000 0x6b0000>;
	+ };
	+ };
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "rgmii1";
	+ ralink,function = "gpio";
	+ };
	+
	+ gpio_i2s {
	+ ralink,group = "uartf";
	+ ralink,function = "gpio i2s";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&gsw {
	+ ralink,port4 = "ephy";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	Index: sys/gnu/dts/mips/DCS-930.dts
	===================================================================
	--- sys/gnu/dts/mips/DCS-930.dts
	+++ sys/gnu/dts/mips/DCS-930.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DCS-930", "ralink,rt3050-soc";
	+ compatible = "dlink,dcs-930", "ralink,rt3050-soc";
	model = "D-Link DCS-930";

	cfi@1f000000 {
	@@ -53,17 +56,17 @@

	wifi {
	label = "dcs-930:red:alert";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "dcs-930:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dcs-930:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -75,14 +78,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DCS-930L-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DCS-930L-B1.dts
	+++ sys/gnu/dts/mips/DCS-930L-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DCS-930L-B1", "ralink,rt5350-soc";
	+ compatible = "dlink,dcs-930l-b1", "ralink,rt5350-soc";
	model = "D-Link DCS-930L B1";

	gpio-leds {
	@@ -11,12 +14,12 @@

	power {
	label = "dcs-930l-b1:red:power";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dcs-930l-b1:blue:wps";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 20 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -48,7 +51,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-300-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-300-B1.dts
	+++ sys/gnu/dts/mips/DIR-300-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-300-B1", "ralink,rt3050-soc";
	+ compatible = "dlink,dir-300-b1", "ralink,rt3050-soc";
	model = "D-Link DIR-300 B1";

	cfi@1f000000 {
	@@ -46,14 +49,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -62,27 +65,27 @@

	status {
	label = "dir-300-b1:amber:status";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status2 {
	label = "dir-300-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "dir-300-b1:amber:wan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-300-b1:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-300-b1:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DIR-300-B7.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-300-B7.dts
	+++ sys/gnu/dts/mips/DIR-300-B7.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-300-B7", "ralink,rt5350-soc";
	+ compatible = "dlink,dir-300-b7", "ralink,rt5350-soc";
	model = "D-Link DIR-300 B7";

	gpio-leds {
	@@ -11,12 +14,12 @@

	status {
	label = "dir-300-b7:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-300-b7:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -48,7 +51,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-320-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-320-B1.dts
	+++ sys/gnu/dts/mips/DIR-320-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-320-B1", "ralink,rt5350-soc";
	+ compatible = "dlink,dir-320-b1", "ralink,rt5350-soc";
	model = "D-Link DIR-320 B1";

	gpio-leds {
	@@ -11,17 +14,17 @@

	status {
	label = "dir-320-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "dir-320-b1:green:usb";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-320-b1:green:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -51,13 +54,13 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	root_hub {
	gpio-export,name = "root_hub";
	gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -70,7 +73,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-600-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-600-B1.dts
	+++ sys/gnu/dts/mips/DIR-600-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-600-B1", "ralink,rt3050-soc";
	+ compatible = "dlink,dir-600-b1", "ralink,rt3050-soc";
	model = "D-Link DIR-600 B1";

	cfi@1f000000 {
	@@ -46,14 +49,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -62,27 +65,27 @@

	status {
	label = "dir-600-b1:amber:status";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status2 {
	label = "dir-600-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "dir-600-b1:amber:wan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-600-b1:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-600-b1:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DIR-600-B2.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-600-B2.dts
	+++ /dev/null
	@@ -1,105 +0,0 @@
	-/dts-v1/;
	-
	-#include "rt3050.dtsi"
	-
	-/ {
	- compatible = "DIR-600-B2", "ralink,rt3050-soc";
	- model = "D-Link DIR-600 B2";
	-
	- cfi@1f000000 {
	- compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	- bank-width = <2>;
	- device-width = <2>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- devdata: partition@30000 {
	- label = "devdata";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- partition@40000 {
	- label = "devconf";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- wps {
	- label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "dir-600-b2:amber:status";
	- gpios = <&gpio0 8 1>;
	- };
	-
	- status2 {
	- label = "dir-600-b2:green:status";
	- gpios = <&gpio0 9 1>;
	- };
	-
	- wan {
	- label = "dir-600-b2:amber:wan";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- wan2 {
	- label = "dir-600-b2:green:wan";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- wps {
	- label = "dir-600-b2:blue:wps";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&devdata 0x4000>;
	-};
	Index: sys/gnu/dts/mips/DIR-610-A1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-610-A1.dts
	+++ sys/gnu/dts/mips/DIR-610-A1.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-610-A1", "ralink,rt5350-soc";
	+ compatible = "dlink,dir-610-a1", "ralink,rt5350-soc";
	model = "D-Link DIR-610 A1";

	gpio-leds {
	@@ -11,12 +14,12 @@

	status {
	label = "dir-610-a1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-610-a1:green:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -48,7 +51,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-615-D.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-615-D.dts
	+++ sys/gnu/dts/mips/DIR-615-D.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-615-D", "ralink,rt3050-soc";
	+ compatible = "dlink,dir-615-d1", "ralink,rt3050-soc";
	model = "D-Link DIR-615 D";

	cfi@1f000000 {
	@@ -46,14 +49,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -62,27 +65,27 @@

	status {
	label = "dir-615-d:amber:status";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status2 {
	label = "dir-615-d:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "dir-615-d:amber:wan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-615-d:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-615-d:blue:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DIR-615-H1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-615-H1.dts
	+++ sys/gnu/dts/mips/DIR-615-H1.dts
	@@ -2,8 +2,11 @@

	#include "rt3352.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-615-H1", "ralink,rt3352-soc";
	+ compatible = "dlink,dir-615-h1", "ralink,rt3352-soc";
	model = "D-Link DIR-615 H1";

	gpio-leds {
	@@ -11,27 +14,27 @@

	status {
	label = "dir-615-h1:amber:status";
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	status2 {
	label = "dir-615-h1:green:status";
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};

	wan {
	label = "dir-615-h1:amber:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-615-h1:green:wan";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-615-h1:blue:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,14 +46,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -97,21 +99,13 @@
	ralink,group = "i2c", "jtag", "uartf";
	ralink,function = "gpio";
	};
	-
	- rgmii {
	- ralink,group = "rgmii";
	- ralink,function = "rgmii";
	- };
	-
	- mdio {
	- ralink,group = "mdio";
	- ralink,function = "mdio";
	- };
	};
	};

	&ethernet {
	mtd-mac-address = <&factory 0x28>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii_pins &mdio_pins>;
	};

	&esw {
	Index: sys/gnu/dts/mips/DIR-620-A1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-620-A1.dts
	+++ sys/gnu/dts/mips/DIR-620-A1.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-620-A1", "ralink,rt3050-soc";
	+ compatible = "dlink,dir-620-a1", "ralink,rt3050-soc";
	model = "D-Link DIR-620 A1";

	cfi@1f000000 {
	@@ -46,14 +49,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -62,32 +65,32 @@

	status {
	label = "dir-620-a1:amber:status";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status2 {
	label = "dir-620-a1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "dir-620-a1:amber:wan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wan2 {
	label = "dir-620-a1:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-620-a1:blue:wps";
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};

	wps2 {
	label = "dir-620-a1:amber:wps";
	- gpios = <&gpio0 11 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DIR-620-D1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-620-D1.dts
	+++ sys/gnu/dts/mips/DIR-620-D1.dts
	@@ -2,8 +2,11 @@

	#include "rt3352.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-620-D1", "ralink,rt3352-soc";
	+ compatible = "dlink,dir-620-d1", "ralink,rt3352-soc";
	model = "D-Link DIR-620 D1";

	gpio-leds {
	@@ -11,12 +14,12 @@

	status {
	label = "dir-620-d1:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "dir-620-d1:green:wifi";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -42,7 +45,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -76,21 +78,13 @@
	ralink,group = "i2c", "jtag", "uartf";
	ralink,function = "gpio";
	};
	-
	- rgmii {
	- ralink,group = "rgmii";
	- ralink,function = "rgmii";
	- };
	-
	- mdio {
	- ralink,group = "mdio";
	- ralink,function = "mdio";
	- };
	};
	};

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii_pins &mdio_pins>;
	};

	&esw {
	Index: sys/gnu/dts/mips/DIR-645.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-645.dts
	+++ sys/gnu/dts/mips/DIR-645.dts
	@@ -2,14 +2,17 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "DIR-645", "ralink,rt3883-soc";
	+ compatible = "dlink,dir-645", "ralink,rt3883-soc";
	model = "D-Link DIR-645";

	rtl8367b {
	compatible = "realtek,rtl8367b";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
	};

	@@ -21,14 +24,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 9 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 14 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -37,12 +40,12 @@

	inet {
	label = "dir-645:green:inet";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "dir-645:green:wps";
	- gpios = <&gpio1 2 0>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -53,7 +56,7 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio1 6 0>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -70,7 +73,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <25000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-810L.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-810L.dts
	+++ sys/gnu/dts/mips/DIR-810L.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
	model = "D-Link DIR-810L";
	@@ -14,14 +17,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};

	@@ -30,17 +33,17 @@

	power {
	label = "dir-810l:green:power";
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};

	wan {
	label = "dir-810l:orange:wan";
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};

	status {
	label = "dir-810l:orange:power";
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/DIR-860L-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/DIR-860L-B1.dts
	+++ sys/gnu/dts/mips/DIR-860L-B1.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
	+ compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
	model = "D-Link DIR-860L B1";

	memory@0 {
	@@ -20,22 +23,22 @@

	power {
	label = "dir-860l-b1:orange:power";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "dir-860l-b1:green:power";
	- gpios = <&gpio0 15 1>;
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	};

	net {
	label = "dir-860l-b1:orange:net";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	net2 {
	label = "dir-860l-b1:green:net";
	- gpios = <&gpio0 16 1>;
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -44,6 +47,18 @@
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	};
	};

	@@ -55,8 +70,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -103,7 +118,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&radio 0x2000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -112,7 +127,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&radio 0>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/DUZUN-DM06.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DUZUN-DM06.dts
	@@ -0,0 +1,143 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "duzun,dm06", "mediatek,mt7628an-soc";
	+ model = "DuZun DM06";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <100>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+
	+ sound {
	+ compatible = "simple-audio-card";
	+ simple-audio-card,name = "Audio-I2S";
	+ simple-audio-card,format = "i2s";
	+ simple-audio-card,bitclock-master = <&dailink0_master>;
	+ simple-audio-card,frame-master = <&dailink0_master>;
	+ simple-audio-card,widgets =
	+ "Headphone", "Headphones";
	+ simple-audio-card,routing =
	+ "Headphones", "HP_L",
	+ "Headphones", "HP_R";
	+ simple-audio-card,mclk-fs = <256>;
	+
	+ simple-audio-card,cpu {
	+ sound-dai = <&i2s>;
	+ };
	+
	+ dailink0_master: simple-audio-card,codec {
	+ sound-dai = <&codec>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "uart1";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+
	+ codec: wm8960@1a {
	+ #sound-dai-cells = <0>;
	+ compatible = "wlf,wm8960";
	+ reg = <0x1a>;
	+
	+ wlf,shared-lrclk;
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x3>;
	+ mediatek,portdisable = <0x3c>;
	+};
	+
	+&i2s {
	+ #sound-dai-cells = <0>;
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2s_pins>, <&refclk_pins>;
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <60000000>;
	+ m25p,chunked-io = <32>;
	+ m25p,fast-read;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/DWR-116-A1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DWR-116-A1.dts
	@@ -0,0 +1,104 @@
	+/dts-v1/;
	+
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dwr-116-a1", "ralink,mt7620n-soc";
	+ model = "D-Link DWR-116 A1/A2";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "dwr-116-a1:green:status";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wifi {
	+ label = "dwr-116-a1:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <50000000>;
	+
	+ partition@0 {
	+ label = "jboot";
	+ reg = <0x0 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@10000 {
	+ label = "firmware";
	+ reg = <0x10000 0x7e0000>;
	+ };
	+
	+ config: partition@7f0000 {
	+ label = "config";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mediatek,portmap = "llllw";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+};
	Index: sys/gnu/dts/mips/DWR-512-B.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DWR-512-B.dts
	@@ -0,0 +1,139 @@
	+/dts-v1/;
	+
	+#include "rt5350.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dwr-512-b", "ralink,rt5350-soc";
	+ model = "D-Link DWR-512 B";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ sms {
	+ label = "dwr-512-b:green:sms";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+ status {
	+ label = "dwr-512-b:green:status";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+ 2g {
	+ label = "dwr-512-b:green:2g";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+ 3g {
	+ label = "dwr-512-b:green:3g";
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	+ };
	+ sstrengthr {
	+ label = "dwr-512-b:red:sigstrength";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	+ };
	+ sstrengthg {
	+ label = "dwr-512-b:green:sigstrength";
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ slic_int {
	+ gpio-export,name = "slic_int";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+ modem3g_enable {
	+ gpio-export,name = "modem3g_enable";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ mx25l6405d@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <30000000>;
	+ m25p,fast-read;
	+
	+ partition@0 {
	+ label = "jboot";
	+ reg = <0x0 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@10000 {
	+ label = "firmware";
	+ reg = <0x10000 0x7e0000>;
	+ };
	+
	+ config: partition@7f0000 {
	+ label = "config";
	+ reg = <0x7f0000 0x10000>;
	+ };
	+ };
	+};
	+
	+&spi1 {
	+ status = "okay";
	+
	+ spidev@1 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "siliconlabs,si3210";
	+
	+ reg = <0>;
	+ spi-max-frequency = <1000000>;
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&config 0xe07e>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&config 0xe08a>;
	+ ralink,led-polarity = <1>;
	+ mtd-mac-address = <&config 0xe07e>;
	+};
	Index: sys/gnu/dts/mips/DWR-921-C1.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/DWR-921-C1.dts
	@@ -0,0 +1,144 @@
	+/dts-v1/;
	+
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "dlink,dwr-921-c1", "ralink,mt7620n-soc";
	+ model = "D-Link DWR-921 C1";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ sms {
	+ label = "dwr-921-c1:green:sms";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan {
	+ label = "dwr-921-c1:green:lan";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ sstrengthg {
	+ label = "dwr-921-c1:green:sigstrength";
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ sstrengthr {
	+ label = "dwr-921-c1:red:sigstrength";
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ 4g {
	+ label = "dwr-921-c1:green:4g";
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ 3g {
	+ label = "dwr-921-c1:green:3g";
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi {
	+ label = "dwr-921-c1:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ lte_modem_enable {
	+ gpio-export,name = "lte_modem_enable";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "jboot";
	+ reg = <0x0 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@10000 {
	+ label = "firmware";
	+ reg = <0x10000 0xfe0000>;
	+ };
	+
	+ config: partition@ff0000 {
	+ label = "config";
	+ reg = <0xff0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ port@4 {
	+ status = "okay";
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "spi refclk", "i2c", "ephy", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/E1700.dts
	===================================================================
	--- sys/gnu/dts/mips/E1700.dts
	+++ sys/gnu/dts/mips/E1700.dts
	@@ -12,6 +12,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "linksys,e1700", "ralink,mt7620a-soc";
	model = "Linksys E1700";
	@@ -24,14 +27,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -40,12 +43,12 @@

	power {
	label = "e1700:green:power";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "e1700:green:wps";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -58,7 +61,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ESR-9753.dts
	===================================================================
	--- sys/gnu/dts/mips/ESR-9753.dts
	+++ sys/gnu/dts/mips/ESR-9753.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ESR-9753", "ralink,rt3052-soc";
	+ compatible = "engenius,esr-9753", "ralink,rt3052-soc";
	model = "Senao / EnGenius ESR-9753";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	power {
	label = "esr-9753:orange:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "esr-9753:orange:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/EW1200.dts
	===================================================================
	--- sys/gnu/dts/mips/EW1200.dts
	+++ sys/gnu/dts/mips/EW1200.dts
	@@ -2,27 +2,24 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG3526";
	+ compatible = "afoundry,ew1200", "mediatek,mt7621-soc";
	+ model = "EW1200";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ reg = <0x0 0x8000000>;
	};

	chosen {
	- bootargs = "console=ttyS0,115200";
	+ bootargs = "console=ttyS0,57600";
	};

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};
	};
	@@ -35,8 +32,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -44,8 +41,13 @@
	compatible = "gpio-leds";

	status {
	- label = "zbt-wg3526:green:status";
	- gpios = <&gpio0 24 1>;
	+ label = "ew1200:green:run";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usb {
	+ label = "ew1200:green:usb";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -62,8 +64,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -97,8 +99,8 @@
	mt76@0,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -106,8 +108,8 @@
	mt76@1,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	@@ -119,7 +121,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/EX2700.dts
	===================================================================
	--- sys/gnu/dts/mips/EX2700.dts
	+++ sys/gnu/dts/mips/EX2700.dts
	@@ -12,8 +12,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "netgear,ex2700", "ralink,mt7620a-soc";
	model = "Netgear EX2700";

	chosen {
	@@ -25,38 +28,38 @@

	power_g {
	label = "ex2700:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	default-state = "on";
	};

	power_r {
	label = "ex2700:red:power";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	device_g {
	label = "ex2700:green:device";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	device_r {
	label = "ex2700:red:device";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	router_g {
	label = "ex2700:green:router";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	router_r {
	label = "ex2700:red:router";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "ex2700:green:wps";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -68,14 +71,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -96,7 +99,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -129,15 +131,13 @@
	};

	&wmac {
	+ mtd-mac-address = <&art 0x6>;
	ralink,mtd-eeprom = <&art 0x1000>;
	};

	&pinctrl {
	state_default: pinctrl0 {
	default {
	- // spi refclk: pins 37, 38, 39
	- // uartf: pins 8, 9, 10, 11, 12, 13, 14
	- // i2c: pins 1, 2
	ralink,group = "i2c", "uartf", "spi refclk";
	ralink,function = "gpio";
	};
	Index: sys/gnu/dts/mips/EX3700.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/EX3700.dts
	@@ -0,0 +1,162 @@
	+/* This file is released into the public domain */
	+
	+/dts-v1/;
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+#include "mt7620a.dtsi"
	+
	+/ {
	+ compatible = "netgear,ex3700", "ralink,mt7620a-soc";
	+ model = "Netgear EX3700/EX3800";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power_g {
	+ label = "ex3700:green:power";
	+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
	+ default-state = "on";
	+ };
	+
	+ power_a {
	+ label = "ex3700:amber:power";
	+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
	+ default-state = "off";
	+ };
	+
	+ router_g {
	+ label = "ex3700:green:router";
	+ gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router_r {
	+ label = "ex3700:red:router";
	+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ device_g {
	+ label = "ex3700:green:device";
	+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ device_r {
	+ label = "ex3700:red:device";
	+ gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "ex3700:green:wps";
	+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x790000>;
	+ };
	+
	+ partition@7e0000 {
	+ label = "board_data";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7f0000 {
	+ label = "nvram";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0 >;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "rgmii2", "spi refclk";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/F5D8235_V1.dts
	===================================================================
	--- sys/gnu/dts/mips/F5D8235_V1.dts
	+++ sys/gnu/dts/mips/F5D8235_V1.dts
	@@ -2,15 +2,22 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "F5D8235_V1", "ralink,rt2880-soc";
	+ compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
	model = "Belkin F5D8235 v1";

	+ pci@440000 {
	+ status = "ok";
	+ };
	+
	cfi@1f000000 {
	compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	+ reg = <0xbc400000 0x800000>;
	bank-width = <2>;
	device-width = <2>;
	#address-cells = <1>;
	@@ -35,15 +42,56 @@
	};

	partition@50000 {
	- label = "linux";
	- reg = <0x50000 0x3b0000>;
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	};
	};

	rtl8366s {
	compatible = "realtek,rtl8366s";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+
	+ realtek,initvals = <
	+ 0x0242 0x02BF
	+ 0x0245 0x02BF
	+ 0x0248 0x02BF
	+ 0x024B 0x02BF
	+ 0x024E 0x02BF
	+ 0x0251 0x02BF
	+ 0x0254 0x0A3F
	+ 0x0256 0x0A3F
	+ 0x0258 0x0A3F
	+ 0x025A 0x0A3F
	+ 0x025C 0x0A3F
	+ 0x025E 0x0A3F
	+ 0x0263 0x007C
	+ 0x0100 0x0004
	+ 0xBE5B 0x3500
	+ 0x800E 0x200F
	+ 0xBE1D 0x0F00
	+ 0x8001 0x5011
	+ 0x800A 0xA2F4
	+ 0x800B 0x17A3
	+ 0xBE4B 0x17A3
	+ 0xBE41 0x5011
	+ 0xBE17 0x2100
	+ 0x8000 0x8304
	+ 0xBE40 0x8304
	+ 0xBE4A 0xA2F4
	+ 0x800C 0xA8D5
	+ 0x8014 0x5500
	+ 0x8015 0x0004
	+ 0xBE4C 0xA8D5
	+ 0xBE59 0x0008
	+ 0xBE09 0x0E00
	+ 0xBE36 0x1036
	+ 0xBE37 0x1036
	+ 0x800D 0x00FF
	+ 0xBE4D 0x00FF
	+ >;
	+
	+ realtek,green-ethernet-features;
	};

	gpio-keys-polled {
	@@ -54,28 +102,83 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	gpio-leds {
	compatible = "gpio-leds";

	+ internet {
	+ label = "f5d8235-v1:blue:internet";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet2 {
	+ label = "f5d8235-v1:amber:internet";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ modem {
	+ label = "f5d8235-v1:blue:modem";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ modem2 {
	+ label = "f5d8235-v1:amber:modem";
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router {
	+ label = "f5d8235-v1:blue:router";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ };
	+
	storage {
	label = "f5d8235-v1:blue:storage";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	storage2 {
	- label = "f5d8235-v1:orange:storage";
	- gpios = <&gpio0 8 1>;
	+ label = "f5d8235-v1:amber:storage";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ security {
	+ label = "f5d8235-v1:blue:security";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ security2 {
	+ label = "f5d8235-v1:amber:security";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wired {
	+ label = "f5d8235-v1:blue:wired";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wired2 {
	+ label = "f5d8235-v1:amber:wired";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless {
	+ label = "f5d8235-v1:blue:wireless";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless2 {
	+ label = "f5d8235-v1:amber:wireless";
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -87,7 +190,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "spi", "i2c", "jtag", "mdio", "uartlite";
	ralink,function = "gpio";
	};
	};
	@@ -102,10 +205,7 @@
	};
	};

	-/* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */
	-/*&wmac {
	+&wmac {
	status = "okay";
	- ralink,mtd-eeprom = <&u-boot 0x40000>;
	+ ralink,mtd-eeprom = <&factory 0x0>;
	};
	-*/
	-
	Index: sys/gnu/dts/mips/F5D8235_V2.dts
	===================================================================
	--- sys/gnu/dts/mips/F5D8235_V2.dts
	+++ sys/gnu/dts/mips/F5D8235_V2.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "F5D8235_V2", "ralink,rt3052-soc";
	+ compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
	model = "Belkin F5D8235 v2";

	cfi@1f000000 {
	@@ -37,9 +40,9 @@
	};

	rtl8366rb {
	- compatible = "rtl8366rb";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ compatible = "realtek,rtl8366rb";
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

	gpio-leds {
	@@ -47,47 +50,47 @@

	internet {
	label = "f5d8235-v2:blue:internet";
	- gpios = <&gpio0 5 1>;
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	};

	internet2 {
	label = "f5d8235-v2:amber:internet";
	- gpios = <&gpio0 6 1>;
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	};

	modem {
	label = "f5d8235-v2:blue:modem";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	modem2 {
	label = "f5d8235-v2:amber:modem";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "f5d8235-v2:blue:router";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	storage {
	label = "f5d8235-v2:blue:storage";
	- gpios = <&gpio0 23 1>;
	+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
	};

	storage2 {
	label = "f5d8235-v2:amber:storage";
	- gpios = <&gpio0 22 1>;
	+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
	};

	security {
	label = "f5d8235-v2:blue:security";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	security2 {
	label = "f5d8235-v2:amber:security";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/F7C027.dts
	===================================================================
	--- sys/gnu/dts/mips/F7C027.dts
	+++ sys/gnu/dts/mips/F7C027.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "F7C027", "ralink,rt5350-soc";
	+ compatible = "belkin,f7c027", "ralink,rt5350-soc";
	model = "Belkin F7C027";

	gpio-leds {
	@@ -11,22 +14,22 @@

	status {
	label = "f7c027:blue:status";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "f7c027:blue:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	orange {
	label = "f7c027:orange:status";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	relay {
	label = "f7c027:device:relay";
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -37,21 +40,21 @@
	poll-interval = <20>;

	top {
	- label = "top";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ label = "restore";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	power {
	label = "power";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};

	sensor {
	label = "sensor";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	@@ -64,7 +67,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l12805d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/FIREWRT.dts
	===================================================================
	--- sys/gnu/dts/mips/FIREWRT.dts
	+++ sys/gnu/dts/mips/FIREWRT.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "firefly,firewrt", "mediatek,mt7621-soc";
	model = "Firefly FireWRT";

	memory@0 {
	@@ -20,7 +23,7 @@

	power {
	label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +35,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	power {
	label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	};
	};
	};
	@@ -56,8 +59,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -92,7 +95,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -101,7 +104,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/FONERA20N.dts
	===================================================================
	--- sys/gnu/dts/mips/FONERA20N.dts
	+++ sys/gnu/dts/mips/FONERA20N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "FONERA20N", "ralink,rt3052-soc";
	+ compatible = "fon,fonera20n", "ralink,rt3052-soc";
	model = "La Fonera 2.0N";

	cfi@1f000000 {
	@@ -43,17 +46,17 @@

	wifi {
	label = "fonera20n:orange:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "fonera20n:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "fonera20n:orange:usb";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -65,15 +68,15 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	switch {
	label = "switch";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0xf7>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/FREESTATION5.dts
	===================================================================
	--- sys/gnu/dts/mips/FREESTATION5.dts
	+++ sys/gnu/dts/mips/FREESTATION5.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "FREESTATION5", "ralink,rt3050-soc";
	+ compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
	model = "ARC FreeStation5";

	chosen {
	@@ -50,7 +53,7 @@
	poe {
	gpio-export,name = "poe-passthrough";
	gpio-export,output = <1>; // OUT_INIT_HIGH
	- gpios = <&gpio0 11 1>; // GPIO 11, ACTIVE_LOW
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; // GPIO 11, ACTIVE_LOW
	};
	};

	@@ -61,17 +64,17 @@
	// not present in the Freestation5 device.
	wifi {
	label = "freestation5:unknown:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	powerg {
	label = "freestation5:unknown:powerg";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "freestation5:unknown:usb";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/GB-PC1.dts
	===================================================================
	--- sys/gnu/dts/mips/GB-PC1.dts
	+++ sys/gnu/dts/mips/GB-PC1.dts
	@@ -2,9 +2,12 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Firefly FireWRT";
	+ compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc";
	+ model = "GB-PC1";

	memory@0 {
	device_type = "memory";
	@@ -15,31 +18,40 @@
	bootargs = "console=ttyS0,57600";
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ system {
	+ label = "gb-pc1:green:system";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	};

	- power {
	- label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ status {
	+ label = "gb-pc1:green:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan1 {
	+ label = "gb-pc1:green:lan1";
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2 {
	+ label = "gb-pc1:green:lan2";
	+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -56,8 +68,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -79,31 +91,18 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};

	+&cpuclock {
	+ compatible = "fixed-clock";
	+ clock-frequency = <900000000>;
	+};
	+
	&pcie {
	status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	};

	&ethernet {
	@@ -113,7 +112,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2";
	+ ralink,group = "jtag", "rgmii2", "uart3", "wdt";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/GB-PC2.dts
	===================================================================
	--- sys/gnu/dts/mips/GB-PC2.dts
	+++ sys/gnu/dts/mips/GB-PC2.dts
	@@ -2,9 +2,12 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG3526";
	+ compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc";
	+ model = "GB-PC2";

	memory@0 {
	device_type = "memory";
	@@ -12,19 +15,7 @@
	};

	chosen {
	- bootargs = "console=ttyS0,115200";
	- };
	-
	- palmbus: palmbus@1E000000 {
	- i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	- status = "okay";
	- };
	+ bootargs = "console=ttyS0,57600";
	};

	gpio-keys-polled {
	@@ -35,23 +26,52 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	gpio-leds {
	compatible = "gpio-leds";

	+ system {
	+ label = "gb-pc2:green:system";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	status {
	- label = "zbt-wg3526:green:status";
	- gpios = <&gpio0 24 1>;
	+ label = "gb-pc2:green:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	+
	+ lan1 {
	+ label = "gb-pc2:green:lan1";
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2 {
	+ label = "gb-pc2:green:lan2";
	+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan3-yellow {
	+ label = "gb-pc2:yellow:lan3";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan3-green {
	+ label = "gb-pc2:green:lan3";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	};
	};

	&sdhci {
	status = "okay";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	};

	&spi0 {
	@@ -62,8 +82,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -85,31 +105,18 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};

	+&cpuclock {
	+ compatible = "fixed-clock";
	+ clock-frequency = <900000000>;
	+};
	+
	&pcie {
	status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	};

	&ethernet {
	@@ -119,8 +126,9 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "jtag", "rgmii3", "uart3", "wdt";
	ralink,function = "gpio";
	};
	};
	};
	+
	Index: sys/gnu/dts/mips/GL-MT300A.dts
	===================================================================
	--- sys/gnu/dts/mips/GL-MT300A.dts
	+++ sys/gnu/dts/mips/GL-MT300A.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "GL-MT300A", "ralink,mt7620a-soc";
	+ compatible = "glinet,gl-mt300a", "ralink,mt7620a-soc";
	model = "GL-MT300A";

	chosen {
	@@ -15,22 +18,22 @@

	wan {
	label = "gl-mt300a:wan";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "gl-mt300a:lan";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "gl-mt300a:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "gl-mt300a:usb";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	};
	@@ -42,20 +45,20 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	BTN_0 {
	label = "BTN_0";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	BTN_1 {
	label = "BTN_1";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -82,9 +85,8 @@
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "w25q128";
	+ compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -129,29 +131,14 @@
	};

	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "wllll";
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};

	-&pcie {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-};
	-
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	Index: sys/gnu/dts/mips/GL-MT300N-V2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/GL-MT300N-V2.dts
	@@ -0,0 +1,143 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/{
	+ compatible = "glinet,gl-mt300n-v2", "ralink,mt7620an-soc";
	+ model = "GL-MT300N-V2";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "gl-mt300n-v2:green:power";
	+ default-state = "on";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "gl-mt300n-v2:blue:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "gl-mt300n-v2:red:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ BTN_0 {
	+ label = "BTN_0";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+
	+ BTN_1 {
	+ label = "BTN_1";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usb {
	+ gpio-export,name = "usb";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&uart1 {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/GL-MT300N.dts
	===================================================================
	--- sys/gnu/dts/mips/GL-MT300N.dts
	+++ sys/gnu/dts/mips/GL-MT300N.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "GL-MT300N", "ralink,mt7620a-soc";
	+ compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
	model = "GL-MT300N";

	chosen {
	@@ -15,17 +18,17 @@

	wan {
	label = "gl-mt300n:wan";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "gl-mt300n:lan";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "gl-mt300n:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	};
	@@ -37,20 +40,20 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	BTN_0 {
	label = "BTN_0";
	- gpios = <&gpio2 2 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	BTN_1 {
	label = "BTN_1";
	- gpios = <&gpio2 3 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -77,9 +80,8 @@
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "w25q128";
	+ compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -121,26 +123,13 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "wllll";
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};

	-&pcie {
	- status = "okay";
	-
	- pcie-bridge {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-};
	-
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	Index: sys/gnu/dts/mips/GL-MT750.dts
	===================================================================
	--- sys/gnu/dts/mips/GL-MT750.dts
	+++ sys/gnu/dts/mips/GL-MT750.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "GL-MT750", "ralink,mt7620a-soc";
	+ compatible = "glinet,gl-mt750", "ralink,mt7620a-soc";
	model = "GL-MT750";

	chosen {
	@@ -15,17 +18,17 @@

	wan {
	label = "gl-mt750:wan";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "gl-mt750:lan";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "gl-mt750:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	};
	@@ -37,20 +40,20 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	BTN_0 {
	label = "BTN_0";
	- gpios = <&gpio2 2 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	BTN_1 {
	label = "BTN_1";
	- gpios = <&gpio2 3 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -77,9 +80,8 @@
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "w25q128";
	+ compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -124,10 +126,8 @@
	};

	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4000>;
	- ralink,port-map = "llllw";
	+ mediatek,portmap = "llllw";
	};

	&wmac {
	@@ -142,7 +142,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HC5661.dts
	===================================================================
	--- sys/gnu/dts/mips/HC5661.dts
	+++ sys/gnu/dts/mips/HC5661.dts
	@@ -1,9 +1,9 @@
	/dts-v1/;

	-#include "HC5XXX.dtsi"
	+#include "HC5X61.dtsi"

	/ {
	- compatible = "HC5661", "ralink,mt7620a-soc";
	+ compatible = "hiwifi,hc5661", "hiwifi,hc5x61", "ralink,mt7620a-soc";
	model = "HiWiFi HC5661";

	gpio-leds {
	@@ -11,22 +11,22 @@

	system {
	label = "hc5661:blue:system";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "hc5661:blue:internet";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	label = "hc5661:blue:wlan2g";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "hc5661:blue:wlan5g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HC5661A.dts
	===================================================================
	--- sys/gnu/dts/mips/HC5661A.dts
	+++ sys/gnu/dts/mips/HC5661A.dts
	@@ -1,11 +1,41 @@
	-#include "mt7620a.dtsi"
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	+ compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
	+ model = "HiWiFi HC5661A";
	+
	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- gpio-keys-polled {
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ system {
	+ label = "hc5661a:blue:system";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
	+ };
	+ internet {
	+ label = "hc5661a:blue:internet";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ };
	+ wlan2g {
	+ label = "hc5661a:blue:wlan2g";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-keys {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	#size-cells = <0>;
	@@ -13,41 +43,21 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	+};

	- gpio_export {
	- compatible = "gpio-export";
	- #size-cells = <0>;
	-
	- usbpower {
	- gpio-export,name = "usbpower";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 13 0>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "refclk", "wled_an";
	+ ralink,function = "gpio";
	};
	};
	};

	-&sysc {
	- ralink,gpiomux = "i2c", "jtag";
	- ralink,uartmux = "gpio";
	- ralink,wdtmux = <1>;
	-};
	-
	-&gpio0 {
	- status = "okay";
	-};
	-
	-&gpio2 {
	- status = "okay";
	-};
	-
	-&gpio3 {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -58,14 +68,16 @@
	reg = <0>;
	linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	reg = <0x0 0x30000>;
	+ read-only;
	};

	partition@30000 {
	- label = "u-boot-env";
	+ label = "hw_panic";
	reg = <0x30000 0x10000>;
	read-only;
	};
	@@ -73,67 +85,39 @@
	factory: partition@40000 {
	label = "factory";
	reg = <0x40000 0x10000>;
	+ read-only;
	};

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xf80000>;
	+ reg = <0x50000 0xf70000>;
	};

	- partition@fd0000 {
	- label = "hwf_config";
	- reg = <0xfd0000 0x10000>;
	+ partition@fc0000 {
	+ label = "oem";
	+ reg = <0xfc0000 0x20000>;
	+ read-only;
	};

	bdinfo: partition@fe0000 {
	label = "bdinfo";
	reg = <0xfe0000 0x10000>;
	+ read-only;
	};

	partition@ff0000 {
	label = "backup";
	reg = <0xff0000 0x10000>;
	+ read-only;
	};
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	};

	-&sdhci {
	- status = "okay";
	-};
	-
	&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&pcie {
	status = "okay";
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uartf", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	- };
	-};
	Index: sys/gnu/dts/mips/HC5761.dts
	===================================================================
	--- sys/gnu/dts/mips/HC5761.dts
	+++ sys/gnu/dts/mips/HC5761.dts
	@@ -1,9 +1,9 @@
	/dts-v1/;

	-#include "HC5XXX.dtsi"
	+#include "HC5X61.dtsi"

	/ {
	- compatible = "HC5761", "ralink,mt7620a-soc";
	+ compatible = "hiwifi,hc5761", "hiwifi,hc5x61", "ralink,mt7620a-soc";
	model = "HiWiFi HC5761";

	gpio-leds {
	@@ -11,22 +11,22 @@

	system {
	label = "hc5761:blue:system";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "hc5761:blue:internet";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	label = "hc5761:blue:wlan2g";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "hc5761:blue:wlan5g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HC5861.dts
	===================================================================
	--- sys/gnu/dts/mips/HC5861.dts
	+++ sys/gnu/dts/mips/HC5861.dts
	@@ -1,9 +1,9 @@
	/dts-v1/;

	-#include "HC5XXX.dtsi"
	+#include "HC5X61.dtsi"

	/ {
	- compatible = "HC5861", "ralink,mt7620a-soc";
	+ compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
	model = "HiWiFi HC5861";

	gpio-leds {
	@@ -11,27 +11,27 @@

	system {
	label = "hc5861:blue:system";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	label = "hc5861:blue:wlan2g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "hc5861:blue:internet";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "hc5861:blue:wlan5g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	turbo {
	label = "hc5861:blue:turbo";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -42,13 +42,13 @@
	usbpower {
	gpio-export,name = "usbpower";
	gpio-export,output = <0>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	sdpower {
	gpio-export,name = "sdpower";
	gpio-export,output = <0>;
	- gpios = <&gpio0 8 0>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HC5962.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/HC5962.dts
	@@ -0,0 +1,148 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "hiwifi,hc5962", "mediatek,mt7621-soc";
	+ model = "HiWiFi HC5962";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "hc5962:white:status";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ system {
	+ label = "hc5962:red:system";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@80000 {
	+ label = "debug";
	+ reg = <0x80000 0x80000>;
	+ read-only;
	+ };
	+
	+ factory: partition@100000 {
	+ label = "factory";
	+ reg = <0x100000 0x40000>;
	+ read-only;
	+ };
	+
	+ partition@140000 {
	+ label = "kernel";
	+ reg = <0x140000 0x200000>;
	+ };
	+
	+ partition@340000 {
	+ label = "ubi";
	+ reg = <0x340000 0x1E00000>;
	+ };
	+
	+ partition@2140000 {
	+ label = "hw_panic";
	+ reg = <0x2140000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@21c0000 {
	+ label = "bdinfo";
	+ reg = <0x21c0000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@2240000 {
	+ label = "backup";
	+ reg = <0x2240000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@22c0000 {
	+ label = "overly";
	+ reg = <0x22c0000 0x1000000>;
	+ };
	+
	+ partition@32c0000 {
	+ label = "firmware_backup";
	+ reg = <0x32c0000 0x2000000>;
	+ };
	+
	+ partition@52c0000 {
	+ label = "oem";
	+ reg = <0x52c0000 0x200000>;
	+ };
	+
	+ partition@54c0000 {
	+ label = "opt";
	+ reg = <0x54c0000 0x2ac0000>;
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart3", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/HC5X61.dtsi
	===================================================================
	--- sys/gnu/dts/mips/HC5X61.dtsi
	+++ sys/gnu/dts/mips/HC5X61.dtsi
	@@ -1,6 +1,11 @@
	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	+ compatible = "hiwifi,hc5x61", "ralink,mt7620a-soc";
	+
	chosen {
	bootargs = "console=ttyS0,115200";
	};
	@@ -13,8 +18,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -25,7 +30,7 @@
	usbpower {
	gpio-export,name = "usbpower";
	gpio-export,output = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -56,7 +61,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -118,6 +122,8 @@

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};

	&pcie {
	@@ -130,10 +136,5 @@
	ralink,group = "uartf", "wled", "nd_sd";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};
	Index: sys/gnu/dts/mips/HG255D.dts
	===================================================================
	--- sys/gnu/dts/mips/HG255D.dts
	+++ sys/gnu/dts/mips/HG255D.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HG255D", "ralink,rt3052-soc";
	+ compatible = "huawei,hg255d", "ralink,rt3052-soc";
	model = "HuaWei HG255D";

	cfi@1f000000 {
	@@ -49,32 +52,32 @@

	power {
	label = "hg255d:green:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "hg255d:green:internet";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "hg255d:green:wlan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "hg255d:green:usb";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "hg255d:green:wps";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	voice {
	label = "hg255d:green:voice";
	- gpios = <&gpio0 5 1>;
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -86,20 +89,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 4 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	rfkill {
	label = "rfkill";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HLKRM04.dts
	===================================================================
	--- sys/gnu/dts/mips/HLKRM04.dts
	+++ sys/gnu/dts/mips/HLKRM04.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HLKRM04", "ralink,rt5350-soc";
	+ compatible = "hilink,hlk-rm04", "ralink,rt5350-soc";
	model = "HILINK HLK-RM04";

	memory@0 {
	@@ -24,13 +27,13 @@
	/* I2C_I2C_SD */
	gpio-export,name = "hlk-rm04:gpio0";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 1 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	};
	gpio2 {
	/* I2C_I2C_SCLK */
	gpio-export,name = "hlk-rm04:gpio1";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 2 0>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -41,13 +44,13 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	wps {
	label = "wps";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -64,7 +67,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/HPM.dts
	===================================================================
	--- sys/gnu/dts/mips/HPM.dts
	+++ sys/gnu/dts/mips/HPM.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HPM", "ralink,rt3883-soc";
	+ compatible = "omnima,hpm", "ralink,rt3883-soc";
	model = "Omnima HPM";

	chosen {
	@@ -18,8 +21,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 14 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -28,32 +31,32 @@

	power {
	label = "hpm:orange:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "hpm:green:status";
	- gpios = <&gpio0 21 1>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	};

	eth {
	label = "hpm:green:eth";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	eth2 {
	label = "hpm:red:eth";
	- gpios = <&gpio0 18 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "hpm:green:wifi";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "hpm:red:wifi";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -65,13 +68,13 @@
	usb0 {
	gpio-export,name = "usb0";
	gpio-export,output = <1>;
	- gpios = <&gpio0 2 0>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

	usb1 {
	gpio-export,name = "usb1";
	gpio-export,output = <1>;
	- gpios = <&gpio0 1 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/HT-TM02.dts
	===================================================================
	--- sys/gnu/dts/mips/HT-TM02.dts
	+++ sys/gnu/dts/mips/HT-TM02.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HT-TM02", "ralink,rt5350-soc";
	+ compatible = "hootoo,ht-tm02", "ralink,rt5350-soc";
	model = "HooToo HT-TM02";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wlan {
	label = "ht-tm02:blue:wlan";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "ht-tm02:green:lan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,15 +31,15 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	modeswitch {
	label = "modeswitch";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/HW550-3G.dts
	===================================================================
	--- sys/gnu/dts/mips/HW550-3G.dts
	+++ sys/gnu/dts/mips/HW550-3G.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "HW550-3G", "ralink,rt3052-soc";
	+ compatible = "aztech,hw550-3g", "ralink,rt3052-soc";
	model = "Aztech HW550-3G";

	cfi@1f000000 {
	@@ -43,22 +46,22 @@

	usb {
	label = "hw550-3g:green:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "hw550-3g:green:3g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "hw550-3g:green:status";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "hw550-3g:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,20 +73,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	connect {
	label = "connect";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0xda>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_CONNECT>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/IP2202.dts
	===================================================================
	--- sys/gnu/dts/mips/IP2202.dts
	+++ sys/gnu/dts/mips/IP2202.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "IP2202", "ralink,rt3052-soc";
	+ compatible = "poray,ip2202", "ralink,rt3052-soc";
	model = "Poray IP2202";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	run {
	label = "ip2202:green:run";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	net {
	label = "ip2202:amber:net";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/JHR-N805R.dts
	===================================================================
	--- sys/gnu/dts/mips/JHR-N805R.dts
	+++ sys/gnu/dts/mips/JHR-N805R.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "JHR-N805R", "ralink,rt3050-soc";
	+ compatible = "jcg,jhr-n805r", "ralink,rt3050-soc";
	model = "JCG JHR-N805R";

	gpio-leds {
	@@ -11,7 +14,7 @@

	system {
	label = "jhr-n805r:blue:system";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -46,7 +49,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/JHR-N825R.dts
	===================================================================
	--- sys/gnu/dts/mips/JHR-N825R.dts
	+++ sys/gnu/dts/mips/JHR-N825R.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "JHR-N825R", "ralink,rt3052-soc";
	+ compatible = "jcg,jhr-n825r", "ralink,rt3052-soc";
	model = "JCG JHR-N825R";

	cfi@1f000000 {
	@@ -42,7 +45,7 @@
	compatible = "gpio-leds";
	system {
	label = "jhr-n825r:red:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,8 +56,8 @@
	poll-interval = <20>;
	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/JHR-N926R.dts
	===================================================================
	--- sys/gnu/dts/mips/JHR-N926R.dts
	+++ sys/gnu/dts/mips/JHR-N926R.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "JHR-N926R", "ralink,rt3052-soc";
	+ compatible = "jcg,jhr-n926r", "ralink,rt3052-soc";
	model = "JCG JHR-N926R";

	cfi@1f000000 {
	@@ -43,22 +46,22 @@

	wlan1 {
	label = "jhr-n926r:red:wlan";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	wlan2 {
	label = "jhr-n926r:yellow:wlan";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};

	wlan3 {
	label = "jhr-n926r:green:wlan";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};

	system {
	label = "jhr-n926r:blue:system";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -69,19 +72,19 @@
	display_data {
	gpio-export,name = "display_data";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	display_clock {
	gpio-export,name = "display_clock";
	gpio-export,output = <1>;
	- gpios = <&gpio0 8 0>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	};

	display_blank {
	gpio-export,name = "display_blank";
	gpio-export,output = <1>;
	- gpios = <&gpio0 11 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -93,14 +96,14 @@

	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wlan {
	label = "wlan";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/K2G.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/K2G.dts
	@@ -0,0 +1,139 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "phicomm,k2g", "ralink,mt7620a-soc";
	+ model = "Phicomm K2G";
	+
	+ aliases {
	+ serial0 = &uartlite;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ led_blue: blue {
	+ label = "k2g:blue:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ yellow {
	+ label = "k2g:yellow:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ red {
	+ label = "k2g:red:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <24000000>;
	+
	+ partitions {
	+ compatible = "fixed-partitions";
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+
	+ u-boot@0 {
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ u-boot-env@30000 {
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: factory@40000 {
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ permanent_config@50000 {
	+ reg = <0x50000 0x50000>;
	+ read-only;
	+ };
	+
	+ firmware@a0000 {
	+ reg = <0xa0000 0x760000>;
	+ };
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+
	+ port@5 {
	+ status = "okay";
	+ phy-handle = <&phy5>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy5: ethernet-phy@5 {
	+ reg = <5>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	Index: sys/gnu/dts/mips/K2P.dts
	===================================================================
	--- sys/gnu/dts/mips/K2P.dts
	+++ sys/gnu/dts/mips/K2P.dts
	@@ -2,9 +2,12 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "STORYLiNK SAP-G3200U3";
	+ compatible = "phicomm,k2p", "mediatek,mt7621-soc";
	+ model = "Phicomm K2P";

	memory@0 {
	device_type = "memory";
	@@ -18,9 +21,19 @@
	gpio-leds {
	compatible = "gpio-leds";

	- usb {
	- label = "sap-g3200u3:green:usb";
	- gpios = <&gpio0 13 1>;
	+ stat_r {
	+ label = "k2p:red:status";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ stat_y {
	+ label = "k2p:yellow:status";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ stat_b {
	+ label = "k2p:blue:status";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +45,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 16 1>;
	- linux,code = <0x198>;
	- };
	-
	- rfkill {
	- label = "rfkill";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -52,8 +59,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -63,13 +70,7 @@

	partition@30000 {
	label = "u-boot-env";
	- reg = <0x30000 0x1000>;
	- read-only;
	- };
	-
	- partition@31000 {
	- label = "config";
	- reg = <0x31000 0xf000>;
	+ reg = <0x30000 0x10000>;
	read-only;
	};

	@@ -80,8 +81,14 @@
	};

	partition@50000 {
	+ label = "permanent_config";
	+ reg = <0x50000 0x50000>;
	+ read-only;
	+ };
	+
	+ partition@a0000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0xa0000 0xf60000>;
	};
	};
	};
	@@ -93,17 +100,7 @@
	mt76@0,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0>;
	};
	};
	};
	@@ -115,7 +112,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "uart3", "jtag";
	+ ralink,group = "i2c", "jtag";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/LINKIT7688.dts
	===================================================================
	--- sys/gnu/dts/mips/LINKIT7688.dts
	+++ sys/gnu/dts/mips/LINKIT7688.dts
	@@ -2,8 +2,11 @@

	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	+ compatible = "mediatek,linkit-smart-7688", "mediatek,mt7628an-soc";
	model = "MediaTek LinkIt Smart 7688";

	chosen {
	@@ -29,9 +32,8 @@
	compatible = "gpio-leds";

	wifi {
	- label = "mediatek:orange:wifi";
	- gpios = <&wgpio 0 0>;
	- default-state = "on";
	+ label = "linkit-smart-7688:orange:wifi";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,18 +45,10 @@

	wps {
	label = "reset";
	- gpios = <&gpio1 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	-
	- wgpio: gpio-wifi {
	- compatible = "mediatek,gpio-wifi";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- gpio-controller;
	- #gpio-cells = <2>;
	- };
	};

	&pinctrl {
	@@ -64,11 +58,6 @@
	ralink,function = "gpio";
	};

	- perst {
	- ralink,group = "perst";
	- ralink,function = "gpio";
	- };
	-
	refclk {
	ralink,group = "refclk";
	ralink,function = "gpio";
	@@ -84,14 +73,9 @@
	ralink,function = "gpio";
	};

	- wled_kn {
	- ralink,group = "wled_kn";
	- ralink,function = "gpio";
	- };
	-
	wled_an {
	ralink,group = "wled_an";
	- ralink,function = "wled_an";
	+ ralink,function = "gpio";
	};

	wdt {
	@@ -116,7 +100,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <40000000>;
	m25p,chunked-io = <31>;

	Index: sys/gnu/dts/mips/M2M.dts
	===================================================================
	--- sys/gnu/dts/mips/M2M.dts
	+++ sys/gnu/dts/mips/M2M.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "M2M", "ralink,rt5350-soc";
	+ compatible = "intenso,memory2move", "ralink,rt5350-soc";
	model = "Intenso Memory 2 Move";

	chosen {
	@@ -15,12 +18,12 @@

	wifi {
	label = "m2m:blue:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "m2m:green:wan";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +35,14 @@

	power {
	label = "power";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x116>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -52,7 +55,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/M3.dts
	===================================================================
	--- sys/gnu/dts/mips/M3.dts
	+++ sys/gnu/dts/mips/M3.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "M3", "ralink,rt5350-soc";
	+ compatible = "poray,m3", "ralink,rt5350-soc";
	model = "Poray M3";

	gpio-leds {
	@@ -11,7 +14,7 @@

	status {
	label = "m3:blue:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,15 +26,15 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 17 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -44,7 +47,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/M4-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/M4-4M.dts
	+++ sys/gnu/dts/mips/M4-4M.dts
	@@ -1,32 +1,10 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "M4.dtsi"

	/ {
	- compatible = "M4", "ralink,rt5350-soc";
	- model = "Poray M4";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "m4:blue:status";
	- gpios = <&gpio0 9 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	- };
	+ compatible = "poray,m4-4m", "poray,m4", "ralink,rt5350-soc";
	+ model = "Poray M4 (4M)";
	};

	&spi0 {
	@@ -37,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "pm25lq032";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -64,29 +41,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/M4-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/M4-8M.dts
	+++ sys/gnu/dts/mips/M4-8M.dts
	@@ -1,32 +1,10 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "M4.dtsi"

	/ {
	- compatible = "M4", "ralink,rt5350-soc";
	- model = "Poray M4";
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "m4:blue:status";
	- gpios = <&gpio0 9 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	- };
	+ compatible = "poray,m4-8m", "poray,m4", "ralink,rt5350-soc";
	+ model = "Poray M4 (8M)";
	};

	&spi0 {
	@@ -37,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -64,34 +41,3 @@
	};
	};
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/M4.dtsi
	===================================================================
	--- sys/gnu/dts/mips/M4.dtsi
	+++ sys/gnu/dts/mips/M4.dtsi
	@@ -1,8 +1,19 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PX-4885", "ralink,rt5350-soc";
	- model = "7Links PX-4885";
	+ compatible = "poray,m4", "ralink,rt5350-soc";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "m4:blue:status";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+ };

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -12,22 +23,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- orange {
	- label = "px-4885:orange:wifi";
	- gpios = <&gpio0 18 1>;
	- };
	-
	- blue {
	- label = "px-4885:blue:storage";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -42,13 +39,23 @@
	};

	&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	+ mtd-mac-address = <&factory 0x4>;
	};

	&esw {
	- mediatek,portmap = <0x3f>;
	+ mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <1>;
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	};
	Index: sys/gnu/dts/mips/MAC1200RV2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/MAC1200RV2.dts
	@@ -0,0 +1,96 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
	+ model = "Mercury MAC1200R v2";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x2000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ status {
	+ label = "mac1200rv2:green:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x1d800>;
	+ };
	+
	+ factory: partition@0x1d800 {
	+ label = "factory_info";
	+ reg = <0x1d800 0x800>;
	+ read-only;
	+ };
	+
	+ art: partition@0x1e000 {
	+ label = "art";
	+ reg = <0x1e000 0x2000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "config";
	+ reg = <0x20000 0x10000>;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot2";
	+ reg = <0x30000 0x10000>;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0x7c0000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ mtd-mac-address = <&factory 0xd>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&art 0x0>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&art 0x1000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/MINIEMBPLUG.dts
	===================================================================
	--- sys/gnu/dts/mips/MINIEMBPLUG.dts
	+++ sys/gnu/dts/mips/MINIEMBPLUG.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MINIEMBPLUG", "ralink,rt5350-soc";
	+ compatible = "omnima,miniembplug", "ralink,rt5350-soc";
	model = "Omnima MiniEMBPlug";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wlan {
	label = "miniembplug:red:wlan";
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};

	mobile {
	label = "miniembplug:green:mobile";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,26 +31,26 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	mode-one {
	label = "mode1";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	mode-two {
	label = "mode2";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -73,7 +76,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MINIEMBWIFI.dts
	===================================================================
	--- sys/gnu/dts/mips/MINIEMBWIFI.dts
	+++ sys/gnu/dts/mips/MINIEMBWIFI.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MINIEMBWIFI", "ralink,rt3052-soc";
	+ compatible = "omnima,miniembwifi", "ralink,rt3052-soc";
	model = "Omnima MiniEMBWiFi";

	gpio-leds {
	@@ -11,12 +14,12 @@

	status {
	label = "miniembwifi:green:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "miniembwifi:green:wlan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	Index: sys/gnu/dts/mips/MIR3G.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/MIR3G.dts
	@@ -0,0 +1,195 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "xiaomi,mir3g", "mediatek,mt7621-soc";
	+ model = "Xiaomi Mi Router 3G";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200n8";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status_red {
	+ label = "mir3g:red:status";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status_blue {
	+ label = "mir3g:blue:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status_yellow {
	+ label = "mir3g:yellow:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_amber {
	+ label = "mir3g:amber:wan";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan1_amber {
	+ label = "mir3g:amber:lan1";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2_amber {
	+ label = "mir3g:amber:lan2";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usbpower {
	+ gpio-export,name = "usbpower";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "Bootloader";
	+ reg = <0x0 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@80000 {
	+ label = "Config";
	+ reg = <0x80000 0x40000>;
	+ };
	+
	+ partition@c0000 {
	+ label = "Bdata";
	+ reg = <0xc0000 0x40000>;
	+ read-only;
	+ };
	+
	+ factory: partition@100000 {
	+ label = "Factory";
	+ reg = <0x100000 0x40000>;
	+ read-only;
	+ };
	+
	+ partition@140000 {
	+ label = "crash";
	+ reg = <0x140000 0x40000>;
	+ };
	+
	+ partition@180000 {
	+ label = "crash_syslog";
	+ reg = <0x180000 0x40000>;
	+ };
	+
	+ partition@1c0000 {
	+ label = "reserved0";
	+ reg = <0x1c0000 0x40000>;
	+ read-only;
	+ };
	+
	+ /* uboot expects to find kernels at 0x200000 & 0x600000
	+ * referred to as system 1 & system 2 respectively.
	+ * a kernel is considered suitable for handing control over
	+ * if its linux magic number exists & uImage CRC are correct.
	+ * If either of those conditions fail, a matching sys'n'_fail flag
	+ * is set in uboot env & a restart performed in the hope that the
	+ * alternate kernel is okay.
	+ * if neither kernel checksums ok and both are marked failed, system 2
	+ * is booted anyway.
	+ *
	+ * Note uboot's tftp flash install writes the transferred
	+ * image to both kernel partitions.
	+ */
	+
	+ partition@200000 {
	+ label = "kernel_stock";
	+ reg = <0x200000 0x400000>;
	+ };
	+
	+ partition@600000 {
	+ label = "kernel";
	+ reg = <0x600000 0x400000>;
	+ };
	+
	+ /* ubi partition is the result of squashing
	+ * next consecutive stock partitions:
	+ * - rootfs0 (rootfs partition for stock kernel0),
	+ * - rootfs1 (rootfs partition for stock failsafe kernel1),
	+ * - overlay (used as ubi overlay in stock fw)
	+ * resulting 117,5MiB space for packages.
	+ */
	+
	+ partition@a00000 {
	+ label = "ubi";
	+ reg = <0xa00000 0x7580000>;
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ wifi@14c3,7603 {
	+ compatible = "pci14c3,7603";
	+ reg = <0x0000 0 0 0 0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	+ reg = <0x0000 0 0 0 0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+ mediatek,portmap = "lwlll";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "jtag", "uart2", "uart3", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/MIWIFI-MINI.dts
	===================================================================
	--- sys/gnu/dts/mips/MIWIFI-MINI.dts
	+++ sys/gnu/dts/mips/MIWIFI-MINI.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
	model = "Xiaomi MiWiFi Mini";
	@@ -15,17 +18,17 @@

	blue {
	label = "miwifi-mini:blue:status";
	- gpios = <&gpio1 0 1>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	};

	yellow {
	label = "miwifi-mini:yellow:status";
	- gpios = <&gpio1 2 1>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	};

	red {
	label = "miwifi-mini:red:status";
	- gpios = <&gpio1 5 1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +40,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio1 6 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -117,12 +119,14 @@
	&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = <&ephy_pins>;
	- mtd-mac-address = <&factory 0x4>;
	+ mtd-mac-address = <&factory 0x28>;
	mediatek,portmap = "llllw";
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};

	&pcie {
	@@ -133,7 +137,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -144,10 +148,5 @@
	ralink,group = "i2c", "rgmii1";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};
	Index: sys/gnu/dts/mips/MIWIFI-NANO.dts
	===================================================================
	--- sys/gnu/dts/mips/MIWIFI-NANO.dts
	+++ sys/gnu/dts/mips/MIWIFI-NANO.dts
	@@ -2,8 +2,11 @@

	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc";
	+ compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc";
	model = "MiWiFi Nano";

	chosen {
	@@ -18,21 +21,30 @@
	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "miwifi-nano:blue:wifi";
	- gpios = <&gpio0 11 1>;
	- default-state = "1";
	+ status_blue {
	+ label = "miwifi-nano:blue:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	- status {
	+ status_red {
	label = "miwifi-nano:red:status";
	- gpios = <&gpio1 5 1>;
	- default-state = "on";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ status_amber {
	+ label = "miwifi-nano:amber:status";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	- radio {
	- label = "miwifi-nano:amber:radio";
	- gpios = <&gpio1 12 1>;
	- default-state = "1";
	+ };

	+ gpio-keys {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -40,7 +52,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "refclk", "wled", "gpio";
	+ ralink,group = "refclk", "wled_an", "gpio";
	ralink,function = "gpio";
	};
	};
	@@ -48,6 +60,11 @@

	&wmac {
	status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x4>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	};

	&spi0 {
	@@ -58,7 +75,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	m25p,chunked-io = <32>;

	@@ -82,7 +98,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0xfb0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MLW221.dts
	===================================================================
	--- sys/gnu/dts/mips/MLW221.dts
	+++ sys/gnu/dts/mips/MLW221.dts
	@@ -2,8 +2,11 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mlw221", "ralink,mt7620n-soc";
	+ compatible = "kingston,mlw221", "ralink,mt7620n-soc";
	model = "Kingston MLW221";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "mlw221:blue:system";
	- gpios = <&gpio2 3 1>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "mlw221:blue:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	system {
	label = "system";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -60,7 +63,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl129p1";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MLWG2.dts
	===================================================================
	--- sys/gnu/dts/mips/MLWG2.dts
	+++ sys/gnu/dts/mips/MLWG2.dts
	@@ -2,8 +2,11 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mlwg2", "ralink,mt7620n-soc";
	+ compatible = "kingston,mlwg2", "ralink,mt7620n-soc";
	model = "Kingston MLWG2";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "mlwg2:blue:system";
	- gpios = <&gpio2 3 1>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "mlwg2:blue:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	system {
	label = "system";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -60,7 +63,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MOFI3500-3GN.dts
	===================================================================
	--- sys/gnu/dts/mips/MOFI3500-3GN.dts
	+++ sys/gnu/dts/mips/MOFI3500-3GN.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MOFI3500-3GN", "ralink,rt3052-soc";
	+ compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc";
	model = "MoFi Network MOFI3500-3GN";

	cfi@1f000000 {
	@@ -43,22 +46,22 @@

	usb {
	label = "mofi3500-3gn:green:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "mofi3500-3gn:green:3g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "mofi3500-3gn:green:status";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "mofi3500-3gn:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,20 +73,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	connect {
	label = "connect";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0xda>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_CONNECT>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MPRA1.dts
	===================================================================
	--- sys/gnu/dts/mips/MPRA1.dts
	+++ sys/gnu/dts/mips/MPRA1.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MPRA1", "ralink,rt5350-soc";
	+ compatible = "hame,mpr-a1", "ralink,rt5350-soc";
	model = "HAME MPR-A1";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "mpr-a1:blue:system";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "mpr-a1:red:power";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	wps {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -40,13 +43,13 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	root_hub {
	gpio-export,name = "root_hub";
	gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -59,7 +62,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MPRA2.dts
	===================================================================
	--- sys/gnu/dts/mips/MPRA2.dts
	+++ sys/gnu/dts/mips/MPRA2.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MPRA2", "ralink,rt5350-soc";
	+ compatible = "hame,mpr-a2", "ralink,rt5350-soc";
	model = "HAME MPR-A2";

	gpio-leds {
	@@ -11,12 +14,12 @@

	system {
	label = "mpr-a2:blue:system";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "mpr-a2:red:power";
	- gpios = <&gpio0 17 1>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	wps {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -40,13 +43,13 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	root_hub {
	gpio-export,name = "root_hub";
	gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -59,7 +62,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MR-102N.dts
	===================================================================
	--- sys/gnu/dts/mips/MR-102N.dts
	+++ sys/gnu/dts/mips/MR-102N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MR-102N", "ralink,rt3052-soc";
	+ compatible = "aximcom,mr-102n", "ralink,rt3052-soc";
	model = "AXIMCom MR-102N";

	cfi@1f000000 {
	@@ -53,17 +56,17 @@

	usb {
	label = "mr-102n:green:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "mr-102n:amber:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "mr-102n:green:wlan";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -75,14 +78,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MT7620a.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7620a.dts
	+++ sys/gnu/dts/mips/MT7620a.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620a + MT7610e evaluation board";
	@@ -14,14 +17,14 @@

	s2 {
	label = "S2";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	s3 {
	label = "S3";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -34,7 +37,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MT7620a_MT7530.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7620a_MT7530.dts
	+++ sys/gnu/dts/mips/MT7620a_MT7530.dts
	@@ -15,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MT7620a_MT7610e.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7620a_MT7610e.dts
	+++ sys/gnu/dts/mips/MT7620a_MT7610e.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620A evaluation board";
	@@ -14,14 +17,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -38,7 +41,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <1000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MT7620a_V22SG.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7620a_V22SG.dts
	+++ sys/gnu/dts/mips/MT7620a_V22SG.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	model = "Ralink MT7620a V22SG High Power evaluation board";
	@@ -14,14 +17,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	Index: sys/gnu/dts/mips/MT7621.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7621.dts
	+++ sys/gnu/dts/mips/MT7621.dts
	@@ -14,35 +14,33 @@
	chosen {
	bootargs = "console=ttyS0,57600";
	};
	+};

	- nand@1e003000 {
	- partition@0 {
	- label = "uboot";
	- reg = <0x00000 0x80000>; /* 64 KB */
	- };
	+&nand {
	+ status = "okay";

	- partition@80000 {
	- label = "uboot_env";
	- reg = <0x80000 0x80000>; /* 64 KB */
	- };
	+ partition@0 {
	+ label = "uboot";
	+ reg = <0x00000 0x80000>; /* 64 KB */
	+ };

	- partition@100000 {
	- label = "factory";
	- reg = <0x100000 0x40000>;
	- };
	+ partition@80000 {
	+ label = "uboot_env";
	+ reg = <0x80000 0x80000>; /* 64 KB */
	+ };

	- partition@140000 {
	- label = "rootfs";
	- reg = <0x140000 0xec0000>;
	- };
	+ partition@100000 {
	+ label = "factory";
	+ reg = <0x100000 0x40000>;
	};
	-};

	-&sdhci {
	- status = "okay";
	+ partition@140000 {
	+ label = "rootfs";
	+ reg = <0x140000 0xec0000>;
	+ };
	};

	-&xhci {
	+&sdhci {
	status = "okay";
	};

	Index: sys/gnu/dts/mips/MT7628.dts
	===================================================================
	--- sys/gnu/dts/mips/MT7628.dts
	+++ sys/gnu/dts/mips/MT7628.dts
	@@ -15,7 +15,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag";
	+ ralink,group = "i2c";
	ralink,function = "gpio";
	};
	};
	@@ -33,7 +33,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	m25p,chunked-io = <32>;

	Index: sys/gnu/dts/mips/MZK-750DHP.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-750DHP.dts
	+++ sys/gnu/dts/mips/MZK-750DHP.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
	model = "Planex MZK-750DHP";

	gpio-leds {
	@@ -11,17 +14,17 @@

	wps {
	label = "mzk-750dhp:green:wps";
	- gpios = <&gpio2 15 1>;
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "mzk-750dhp:green:power";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "mzk-750dhp:green:wlan5g";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	s1 {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	s2 {
	label = "wps";
	- gpios = <&gpio2 19 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -61,7 +64,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -121,7 +123,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MZK-DP150N.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-DP150N.dts
	+++ sys/gnu/dts/mips/MZK-DP150N.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MZK-DP150N", "ralink,rt5350-soc";
	+ compatible = "planex,mzk-dp150n", "ralink,rt5350-soc";
	model = "Planex MZK-DP150N";

	gpio-leds {
	@@ -11,7 +14,7 @@

	power {
	label = "mzk-dp150n:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -41,7 +44,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MZK-EX300NP.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-EX300NP.dts
	+++ sys/gnu/dts/mips/MZK-EX300NP.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,mzk-ex300np", "ralink,mt7620a-soc";
	model = "Planex MZK-EX300NP";

	gpio-leds {
	@@ -11,32 +14,32 @@

	wifi {
	label = "mzk-ex300np:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "mzk-ex300np:green:wps";
	- gpios = <&gpio1 5 1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};

	rep {
	label = "mzk-ex300np:blue:rep";
	- gpios = <&gpio1 4 1>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	};

	wifi1 {
	label = "mzk-ex300np:blue:wifi1";
	- gpios = <&gpio1 1 1>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "mzk-ex300np:blue:wifi2";
	- gpios = <&gpio1 2 1>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	};

	wifi3 {
	label = "mzk-ex300np:blue:wifi3";
	- gpios = <&gpio1 0 1>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -48,14 +51,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 3 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -76,7 +79,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/MZK-EX750NP.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-EX750NP.dts
	+++ sys/gnu/dts/mips/MZK-EX750NP.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
	model = "Planex MZK-EX750NP";

	gpio-leds {
	@@ -11,37 +14,37 @@

	power {
	label = "mzk-ex750np:red:power";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "mzk-ex750np:red:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "mzk-ex750np:green:wps";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	rep {
	label = "mzk-ex750np:blue:rep";
	- gpios = <&gpio2 16 1>;
	+ gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
	};

	wifi1 {
	label = "mzk-ex750np:blue:wifi1";
	- gpios = <&gpio2 19 1>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "mzk-ex750np:blue:wifi2";
	- gpios = <&gpio2 18 1>;
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	};

	wifi3 {
	label = "mzk-ex750np:blue:wifi3";
	- gpios = <&gpio2 17 1>;
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,14 +56,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 13 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -81,7 +84,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -142,7 +144,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MZK-W04N-XX.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/MZK-W04N-XX.dts
	@@ -1,94 +0,0 @@
	-/dts-v1/;
	-
	-#include "rt2880.dtsi"
	-
	-/ {
	- compatible = "MZK-WNH", "ralink,rt2880-soc";
	- model = "Planex MZK-WNH";
	-
	-/*
	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x2000000>;
	- };
	-*/
	-
	- cfi@1f000000 {
	- compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	- bank-width = <2>;
	- device-width = <2>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	-
	- partition@0 {
	- label = "Bootloader";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- devdata: partition@30000 {
	- label = "Config";
	- reg = <0x00030000 0x00010000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "Factory";
	- reg = <0x00040000 0x00010000>;
	- read-only;
	- };
	- kernel: partition@50000 {
	- label = "kernel";
	- reg = <0x00050000 0x000f0000>;
	- read-only;
	- };
	- rootfs: partition@160000 {
	- label = "rootfs";
	- reg = <0x00140000 0x002c0000>;
	- read-only;
	- };
	- upgrade: partition@400000 {
	- label = "upgrade";
	- reg = <0x00050000 0x003b0000>;
	- read-only;
	- };
	-
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "status";
	- gpios = <&gpio0 12 0>;
	- };
	-
	- };
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- };
	-
	- ip17x@0 {
	- compatible = "icplus,ip17x";
	- };
	-
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	Index: sys/gnu/dts/mips/MZK-W300NH2.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-W300NH2.dts
	+++ sys/gnu/dts/mips/MZK-W300NH2.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MZK-W300NH2", "ralink,rt3052-soc";
	+ compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
	model = "Planex MZK-W300NH2";

	cfi@1f000000 {
	@@ -49,17 +52,17 @@

	power {
	label = "mzk-w300nh2:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "mzk-w300nh2:amber:wlan";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "mzk-w300nh2:amber:wps";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -71,20 +74,20 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	rt {
	label = "rt";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MZK-WDPR.dts
	===================================================================
	--- sys/gnu/dts/mips/MZK-WDPR.dts
	+++ sys/gnu/dts/mips/MZK-WDPR.dts
	@@ -2,8 +2,10 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "MZK-WDPR", "ralink,rt3052-soc";
	+ compatible = "planex,mzk-wdpr", "ralink,rt3052-soc";
	model = "Planex MZK-WDPR";

	chosen {
	@@ -55,7 +57,7 @@
	lcd_ctrl1 {
	gpio-export,name = "lcd_ctrl1";
	gpio-export,output = <0>;
	- gpios = <&gpio0 1 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/MicroWRT.dts
	===================================================================
	--- sys/gnu/dts/mips/MicroWRT.dts
	+++ sys/gnu/dts/mips/MicroWRT.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "microwrt", "ralink,mt7620a-soc";
	+ compatible = "microduino,microwrt", "ralink,mt7620a-soc";
	model = "Microduino MicroWRT";

	chosen {
	@@ -18,14 +21,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -46,7 +49,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/NA930.dts
	===================================================================
	--- sys/gnu/dts/mips/NA930.dts
	+++ sys/gnu/dts/mips/NA930.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
	+ compatible = "sercomm,na930", "ralink,mt7620a-soc";
	model = "Sercomm NA930";

	chosen {
	@@ -47,20 +50,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	zwave {
	label = "zwave";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -69,22 +72,22 @@

	zwave {
	label = "na930:blue:zwave";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	status {
	label = "na930:blue:status";
	- gpios = <&gpio2 26 1>;
	+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
	};

	service {
	label = "na930:blue:service";
	- gpios = <&gpio2 28 1>;
	+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "na930:blue:power";
	- gpios = <&gpio2 29 1>;
	+ gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -95,7 +98,7 @@
	telit {
	gpio-export,name = "telit";
	gpio-export,output = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/NBG-419N.dts
	===================================================================
	--- sys/gnu/dts/mips/NBG-419N.dts
	+++ sys/gnu/dts/mips/NBG-419N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "NBG-419N", "ralink,rt3052-soc";
	+ compatible = "zyxel,nbg-419n", "ralink,rt3052-soc";
	model = "ZyXEL NBG-419N";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	power {
	label = "nbg-419n:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "nbg-419n:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/NBG-419N2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/NBG-419N2.dts
	@@ -0,0 +1,119 @@
	+/dts-v1/;
	+
	+#include "rt3352.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "zyxel,nbg-419n-v2", "ralink,rt3352-soc";
	+ model = "ZyXEL NBG-419N v2";
	+
	+ palmbus@10000000 {
	+ spi@b00 {
	+ status = "okay";
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0 0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	+ };
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "nbg-419n2:green:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "nbg-419n2:green:wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "nbg-419n2:green:usb";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ rfkill {
	+ label = "rfkill";
	+ linux,input-type = <EV_SW>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/NCS601W.dts
	===================================================================
	--- sys/gnu/dts/mips/NCS601W.dts
	+++ sys/gnu/dts/mips/NCS601W.dts
	@@ -3,7 +3,7 @@
	#include "rt5350.dtsi"

	/ {
	- compatible = "NCS601W", "ralink,rt5350-soc";
	+ compatible = "wansview,ncs601w", "ralink,rt5350-soc";
	model = "Wansview NCS601W";
	};

	@@ -15,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/NIXCORE-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/NIXCORE-16M.dts
	+++ sys/gnu/dts/mips/NIXCORE-16M.dts
	@@ -1,6 +1,11 @@
	/dts-v1/;

	-#include "VOCORE.dtsi"
	+#include "NIXCORE.dtsi"
	+
	+/ {
	+ compatible = "nixcore,x1-16m", "nixcore,x1", "ralink,rt5350-soc";
	+ model = "NixcoreX1 (16M)";
	+};

	&spi0 {
	status = "okay";
	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/NIXCORE-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/NIXCORE-8M.dts
	+++ sys/gnu/dts/mips/NIXCORE-8M.dts
	@@ -1,6 +1,11 @@
	/dts-v1/;

	-#include "VOCORE.dtsi"
	+#include "NIXCORE.dtsi"
	+
	+/ {
	+ compatible = "nixcore,x1-8m", "nixcore,x1", "ralink,rt5350-soc";
	+ model = "NixcoreX1 (8M)";
	+};

	&spi0 {
	status = "okay";
	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/NIXCORE.dtsi
	===================================================================
	--- sys/gnu/dts/mips/NIXCORE.dtsi
	+++ sys/gnu/dts/mips/NIXCORE.dtsi
	@@ -1,8 +1,13 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "VoCore", "ralink,rt5350-soc";
	- model = "VoCore";
	+ compatible = "nixcore,x1", "ralink,rt5350-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS1,57600";
	+ };

	gpio-export {
	compatible = "gpio-export";
	@@ -11,154 +16,119 @@
	gpio0 {
	gpio-export,name = "gpio0";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 0 0>;
	- };
	-
	- /* UARTF */
	- gpio7 {
	- /* UARTF_RTS_N */
	- gpio-export,name = "gpio7";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 7 0>;
	- };
	-
	- gpio8 {
	- /* UARTF_TXD */
	- gpio-export,name = "gpio8";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 8 0>;
	- };
	-
	- gpio9 {
	- /* UARTF_CTS_N */
	- gpio-export,name = "gpio9";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 9 0>;
	- };
	-
	- gpio12 {
	- /* UARTF_DCD_N */
	- gpio-export,name = "gpio12";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 12 0>;
	- };
	-
	- gpio13 {
	- /* UARTF_DSR_N */
	- gpio-export,name = "gpio13";
	- gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};

	- gpio14 {
	- /* UARTF_RIN */
	- gpio-export,name = "gpio14";
	+ gpio1 {
	+ gpio-export,name = "gpio1";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 14 0>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
	};

	+ /* GPIOs 1-6 are I2C,SPI */
	+ /* GPIO 7-14 are uart1 */
	+ /* GPIOs 15 & 16 are uart2 */
	/* JTAG */
	+
	gpio17 {
	/* JTAG_TDO */
	gpio-export,name = "gpio17";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 17 0>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
	};

	gpio18 {
	/* JTAG_TDI */
	gpio-export,name = "gpio18";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 18 0>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	};

	gpio19 {
	/* JTAG_TMS */
	gpio-export,name = "gpio19";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 19 0>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
	};

	gpio20 {
	/* JTAG_TCLK */
	gpio-export,name = "gpio20";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 20 0>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
	};

	gpio21 {
	/* JTAG_TRST_N */
	gpio-export,name = "gpio21";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 21 0>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
	};

	/* ETH LEDs */
	+ /*
	gpio22 {
	- /* ETH0_LED */
	gpio-export,name = "gpio22";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 0 0>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
	};

	gpio23 {
	- /* ETH1_LED */
	gpio-export,name = "gpio23";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 1 0>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
	};

	gpio24 {
	- /* ETH2_LED */
	gpio-export,name = "gpio24";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 2 0>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	};

	gpio25 {
	- /* ETH3_LED */
	gpio-export,name = "gpio25";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 3 0>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	};

	+ */
	gpio26 {
	/* ETH4_LED */
	gpio-export,name = "gpio26";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 4 0>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- /* UARTF_RXD */
	- label = "vocore:green:status";
	- gpios = <&gpio0 10 0>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
	};

	- eth {
	- /* UARTF_DTR_N */
	- label = "vocore:orange:eth";
	- gpios = <&gpio0 11 0>;
	+ gpio27 {
	+ /* spi_cs1 */
	+ gpio-export,name = "gpio27";
	+ gpio-export,direction_may_change = <1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
	};
	};
	};

	+&gpio0 {
	+ status = "okay";
	+};
	+
	&gpio1 {
	- status = "okay";
	+ status = "okay";
	};

	&i2c {
	- status = "okay";
	+ status = "okay";
	+};
	+
	+&uart {
	+ status = "okay";
	+ reset-names = "gpio uartf";
	};

	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "jtag", "uartf", "led";
	+ ralink,group = "jtag", "led", "spi_cs1";
	ralink,function = "gpio";
	};
	};
	@@ -169,8 +139,7 @@
	};

	&esw {
	- mediatek,portmap = <0x11>;
	- mediatek,portdisable = <0x2e>;
	+ mediatek,portmap = <0x17>;
	};

	&wmac {
	@@ -184,13 +153,3 @@
	&ohci {
	status = "okay";
	};
	-
	-&spi1 {
	- status = "okay";
	-
	- spidev@0 {
	- compatible = "linux,spidev";
	- spi-max-frequency = <10000000>;
	- reg = <0>;
	- };
	-};
	Index: sys/gnu/dts/mips/NW718.dts
	===================================================================
	--- sys/gnu/dts/mips/NW718.dts
	+++ sys/gnu/dts/mips/NW718.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "NW718", "ralink,rt3050-soc";
	+ compatible = "netcore,nw718", "ralink,rt3050-soc";
	model = "Netcore NW718";

	gpio-leds {
	@@ -11,17 +14,17 @@

	cpu {
	label = "nw718:amber:cpu";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "nw718:amber:usb";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "nw718:amber:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <25000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/Newifi-D1.dts
	===================================================================
	--- sys/gnu/dts/mips/Newifi-D1.dts
	+++ sys/gnu/dts/mips/Newifi-D1.dts
	@@ -2,28 +2,38 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG2626";
	+ compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
	+ model = "Newifi-D1";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ reg = <0x0 0x10000000>;
	};

	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus: palmbus@1E000000 {
	- i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	- status = "okay";
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status-red {
	+ label = "newifi-d1:red:status";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ status-green {
	+ label = "newifi-d1:green:status";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ statys-blue {
	+ label = "newifi-d1:blue:status";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -35,23 +45,34 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;

	- status {
	- label = "zbt-wg2626:green:status";
	- gpios = <&gpio0 24 1>;
	+ usb2power {
	+ gpio-export,name = "usb2power";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usb3power {
	+ gpio-export,name = "usb3power";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};
	};

	&sdhci {
	status = "okay";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	};

	&spi0 {
	@@ -62,8 +83,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -85,7 +106,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};
	@@ -98,7 +119,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -107,7 +128,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	@@ -119,7 +139,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/Newifi-D2.dts
	===================================================================
	--- sys/gnu/dts/mips/Newifi-D2.dts
	+++ sys/gnu/dts/mips/Newifi-D2.dts
	@@ -2,63 +2,58 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "PBR-M1";
	+ compatible = "d-team,newifi-d2", "mediatek,mt7621-soc";
	+ model = "Newifi-D2";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x10000000>;
	+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	};

	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus: palmbus@1E000000 {
	- i2c: i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	- status = "okay";
	-
	- pcf8563: rtc@51 {
	- status = "okay";
	- compatible = "nxp,pcf8563";
	- reg = <0x51>;
	- };
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	- power {
	- label = "pbr-m1:blue:power";
	- gpios = <&gpio0 31 1>;
	+ power-amber {
	+ label = "newifi-d2:amber:power";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	};

	- sys {
	- label = "pbr-m1:blue:sys";
	- gpios = <&gpio1 0 1>;
	+ power-blue {
	+ label = "newifi-d2:blue:power";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	};

	- internet {
	- label = "pbr-m1:blue:internet";
	- gpios = <&gpio0 29 1>;
	+ internet-amber {
	+ label = "newifi-d2:amber:internet";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet-blue {
	+ label = "newifi-d2:blue:internet";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	- label = "pbr-m1:blue:wlan2g";
	- gpios = <&gpio1 1 1>;
	+ label = "newifi-d2:blue:wlan2g";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	- label = "pbr-m1:blue:wlan5g";
	- gpios = <&gpio0 28 1>;
	+ label = "newifi-d2:blue:wlan5g";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "newifi-d2:blue:usb";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,8 +65,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -79,39 +80,12 @@
	compatible = "gpio-export";
	#size-cells = <0>;

	- power_usb2 {
	- gpio-export,name = "power_usb2";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 22 0>;
	- };
	-
	power_usb3 {
	gpio-export,name = "power_usb3";
	gpio-export,output = <1>;
	- gpios = <&gpio0 25 0>;
	- };
	-
	- power_sata {
	- gpio-export,name = "power_sata";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 27 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};
	-
	- beeper: beeper {
	- compatible = "gpio-beeper";
	- gpios = <&gpio0 26 1>;
	- };
	-};
	-
	-&sdhci {
	- status = "okay";
	- pinctrl-names = "default";
	- pinctrl-0 = <&sdhci_pins>;
	-};
	-
	-&xhci {
	- status = "okay";
	};

	&spi0 {
	@@ -122,8 +96,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -145,7 +119,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};
	@@ -158,7 +132,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -167,7 +141,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	@@ -176,12 +149,10 @@
	mtd-mac-address = <&factory 0xe000>;
	};

	-
	-
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	+ ralink,group = "i2c", "jtag", "uart2", "uart3";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/OMEGA2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/OMEGA2.dts
	@@ -0,0 +1,21 @@
	+/dts-v1/;
	+
	+#include "OMEGA2.dtsi"
	+
	+/ {
	+ compatible = "onion,omega2", "mediatek,mt7628an-soc";
	+ model = "Onion Omega2";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+};
	+
	+&firmware {
	+ reg = <0x50000 0xfb0000>;
	+};
	+
	+&system_led {
	+ label = "omega2:amber:system";
	+};
	Index: sys/gnu/dts/mips/OMEGA2.dtsi
	===================================================================
	--- sys/gnu/dts/mips/OMEGA2.dtsi
	+++ sys/gnu/dts/mips/OMEGA2.dtsi
	@@ -1,37 +1,20 @@
	-/dts-v1/;
	-
	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	- model = "MediaTek LinkIt Smart 7688";
	+ compatible = "onion,omega2", "mediatek,mt7628an-soc";

	chosen {
	- bootargs = "console=ttyS2,57600";
	- };
	-
	- aliases {
	- serial0 = &uart2;
	- };
	-
	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x8000000>;
	- };
	-
	- bootstrap {
	- compatible = "mediatek,linkit";
	-
	- status = "okay";
	+ bootargs = "console=ttyS0,115200";
	};

	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "mediatek:orange:wifi";
	- gpios = <&wgpio 0 0>;
	- default-state = "on";
	+ system_led: system {
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -41,20 +24,12 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	+ reset {
	label = "reset";
	- gpios = <&gpio1 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	-
	- wgpio: gpio-wifi {
	- compatible = "mediatek,gpio-wifi";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- gpio-controller;
	- #gpio-cells = <2>;
	- };
	};

	&pinctrl {
	@@ -91,17 +66,31 @@

	wled_an {
	ralink,group = "wled_an";
	- ralink,function = "wled_an";
	+ ralink,function = "gpio";
	};

	wdt {
	ralink,group = "wdt";
	ralink,function = "gpio";
	};
	+
	+ pwm0 {
	+ ralink,group = "pwm0";
	+ ralink,function = "gpio";
	+ };
	+
	+ pwm1 {
	+ ralink,group = "pwm1";
	+ ralink,function = "gpio";
	+ };
	};
	};

	-&wmac {
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio2 {
	status = "okay";
	};

	@@ -116,7 +105,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <40000000>;
	m25p,chunked-io = <31>;

	@@ -129,6 +117,7 @@
	partition@30000 {
	label = "u-boot-env";
	reg = <0x30000 0x10000>;
	+ read-only;
	};

	factory: partition@40000 {
	@@ -137,9 +126,8 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	};
	};

	@@ -164,17 +152,13 @@
	status = "okay";
	};

	-&pwm {
	- status = "okay";
	-};
	-
	&ethernet {
	mtd-mac-address = <&factory 0x28>;
	};

	&sdhci {
	status = "okay";
	- mediatek,cd-high;
	+ mediatek,cd-low;
	};

	&wmac {
	Index: sys/gnu/dts/mips/OMEGA2P.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/OMEGA2P.dts
	@@ -0,0 +1,21 @@
	+/dts-v1/;
	+
	+#include "OMEGA2.dtsi"
	+
	+/ {
	+ compatible = "onion,omega2p", "onion,omega2", "mediatek,mt7628an-soc";
	+ model = "Onion Omega2+";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+};
	+
	+&firmware {
	+ reg = <0x50000 0x1fb0000>;
	+};
	+
	+&system_led {
	+ label = "omega2p:amber:system";
	+};
	Index: sys/gnu/dts/mips/OY-0001.dts
	===================================================================
	--- sys/gnu/dts/mips/OY-0001.dts
	+++ sys/gnu/dts/mips/OY-0001.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc";
	model = "OY-0001";

	chosen {
	@@ -15,12 +18,12 @@

	powerled {
	label = "oy-0001:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifiled {
	label = "oy-0001:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,8 +35,8 @@

	s1 {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -54,7 +57,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/PBR-D1.dts
	===================================================================
	--- sys/gnu/dts/mips/PBR-D1.dts
	+++ sys/gnu/dts/mips/PBR-D1.dts
	@@ -2,12 +2,15 @@

	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	- model = "MediaTek LinkIt Smart 7688";
	+ compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc";
	+ model = "PBR-D1";

	chosen {
	- bootargs = "console=ttyS2,57600";
	+ bootargs = "console=ttyS0,115200";
	};

	aliases {
	@@ -19,18 +22,18 @@
	reg = <0x0 0x8000000>;
	};

	- bootstrap {
	- compatible = "mediatek,linkit";
	-
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "mediatek:orange:wifi";
	- gpios = <&wgpio 0 0>;
	+ usb {
	+ label = "pbr-d1:orange:usb";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ default-state = "off";
	+ };
	+
	+ power {
	+ label = "pbr-d1:orange:power";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	default-state = "on";
	};
	};
	@@ -41,10 +44,10 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	+ reset {
	label = "reset";
	- gpios = <&gpio1 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -64,13 +67,8 @@
	ralink,function = "gpio";
	};

	- perst {
	- ralink,group = "perst";
	- ralink,function = "gpio";
	- };
	-
	- refclk {
	- ralink,group = "refclk";
	+ i2c {
	+ ralink,group = "i2c";
	ralink,function = "gpio";
	};

	@@ -84,16 +82,6 @@
	ralink,function = "gpio";
	};

	- wled_kn {
	- ralink,group = "wled_kn";
	- ralink,function = "gpio";
	- };
	-
	- wled_an {
	- ralink,group = "wled_an";
	- ralink,function = "wled_an";
	- };
	-
	wdt {
	ralink,group = "wdt";
	ralink,function = "gpio";
	@@ -101,10 +89,6 @@
	};
	};

	-&wmac {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -116,7 +100,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	spi-max-frequency = <40000000>;
	m25p,chunked-io = <31>;

	@@ -139,7 +122,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	+ reg = <0x50000 0x0fb0000>;
	};
	};

	@@ -176,7 +159,3 @@
	status = "okay";
	mediatek,cd-high;
	};
	-
	-&wmac {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/PBR-M1.dts
	===================================================================
	--- sys/gnu/dts/mips/PBR-M1.dts
	+++ sys/gnu/dts/mips/PBR-M1.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
	model = "PBR-M1";

	memory@0 {
	@@ -17,12 +20,6 @@

	palmbus: palmbus@1E000000 {
	i2c: i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";

	pcf8563: rtc@51 {
	@@ -38,27 +35,27 @@

	power {
	label = "pbr-m1:blue:power";
	- gpios = <&gpio0 31 1>;
	+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
	};

	sys {
	label = "pbr-m1:blue:sys";
	- gpios = <&gpio1 0 1>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "pbr-m1:blue:internet";
	- gpios = <&gpio0 29 1>;
	+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
	};

	wlan2g {
	label = "pbr-m1:blue:wlan2g";
	- gpios = <&gpio1 1 1>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	};

	wlan5g {
	label = "pbr-m1:blue:wlan5g";
	- gpios = <&gpio0 28 1>;
	+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,8 +67,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -82,25 +79,25 @@
	power_usb2 {
	gpio-export,name = "power_usb2";
	gpio-export,output = <1>;
	- gpios = <&gpio0 22 0>;
	+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
	};

	power_usb3 {
	gpio-export,name = "power_usb3";
	gpio-export,output = <1>;
	- gpios = <&gpio0 25 0>;
	+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
	};

	power_sata {
	gpio-export,name = "power_sata";
	gpio-export,output = <1>;
	- gpios = <&gpio0 27 0>;
	+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
	};
	};

	beeper: beeper {
	compatible = "gpio-beeper";
	- gpios = <&gpio0 26 1>;
	+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -110,10 +107,6 @@
	pinctrl-0 = <&sdhci_pins>;
	};

	-&xhci {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -122,8 +115,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -158,7 +151,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -167,7 +160,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	@@ -176,8 +168,6 @@
	mtd-mac-address = <&factory 0xe000>;
	};

	-
	-
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	Index: sys/gnu/dts/mips/PSG1208.dts
	===================================================================
	--- sys/gnu/dts/mips/PSG1208.dts
	+++ sys/gnu/dts/mips/PSG1208.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PSG1208", "ralink,mt7620a-soc";
	+ compatible = "phicomm,psg1208", "ralink,mt7620a-soc";
	model = "Phicomm PSG1208";

	gpio-leds {
	@@ -11,12 +14,12 @@

	wan {
	label = "psg1208:white:wps";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "psg1208:white:wlan2g";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -50,7 +53,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -81,7 +83,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	+ ralink,group = "i2c", "spi refclk", "wled";
	ralink,function = "gpio";
	};
	};
	@@ -102,7 +104,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/PSG1218.dtsi
	===================================================================
	--- sys/gnu/dts/mips/PSG1218.dtsi
	+++ sys/gnu/dts/mips/PSG1218.dtsi
	@@ -1,9 +1,10 @@
	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- chosen {
	- bootargs = "console=ttyS0,115200";
	- };
	+ compatible = "phicomm,psg1218", "ralink,mt7620a-soc";

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -13,21 +14,13 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	-
	-&gpio0 {
	- status = "okay";
	-};

	-&gpio2 {
	- status = "okay";
	-};
	-
	-&gpio3 {
	+&gpio0 {
	status = "okay";
	};

	@@ -39,7 +32,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -48,33 +40,25 @@
	read-only;
	};

	- partition@30000 {
	+ partition@20000 {
	label = "u-boot-env";
	reg = <0x30000 0x10000>;
	read-only;
	};

	- factory: partition@40000 {
	+ factory: partition@30000 {
	label = "factory";
	reg = <0x40000 0x10000>;
	read-only;
	};

	- partition@50000 {
	+ partition@40000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0x7b0000>;
	};
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&pcie {
	status = "okay";

	@@ -83,25 +67,11 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	-
	+
	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uartf", "wled", "nd_sd";
	- ralink,function = "gpio";
	- };
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	- };
	-};
	Index: sys/gnu/dts/mips/PSG1218A.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/PSG1218A.dts
	@@ -0,0 +1,47 @@
	+/dts-v1/;
	+
	+#include "PSG1218.dtsi"
	+
	+/ {
	+ compatible = "phicomm,psg1218a", "phicomm,psg1218", "ralink,mt7620a-soc";
	+ model = "Phicomm PSG1218 rev.A";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ blue {
	+ label = "psg1218a:blue:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ yellow {
	+ label = "psg1218a:yellow:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ red {
	+ label = "psg1218a:red:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&wmac {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	+};
	Index: sys/gnu/dts/mips/PSG1218B.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/PSG1218B.dts
	@@ -0,0 +1,42 @@
	+/dts-v1/;
	+
	+#include "PSG1218.dtsi"
	+
	+/ {
	+ compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc";
	+ model = "Phicomm PSG1218 rev.B";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ blue {
	+ label = "psg1218b:blue:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ yellow {
	+ label = "psg1218b:yellow:status";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ red {
	+ label = "psg1218b:red:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	+ mtd-mac-address = <&factory 0x28>;
	+ mediatek,portmap = "llllw";
	+};
	Index: sys/gnu/dts/mips/PSR-680W.dts
	===================================================================
	--- sys/gnu/dts/mips/PSR-680W.dts
	+++ sys/gnu/dts/mips/PSR-680W.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PSR-680W", "ralink,rt3052-soc";
	+ compatible = "petatel,psr-680w", "ralink,rt3052-soc";
	model = "Petatel PSR-680W Wireless 3G Router";

	chosen {
	@@ -47,7 +50,7 @@

	wan {
	label = "psr-680w:red:wan";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -59,8 +62,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/PWH2004.dts
	===================================================================
	--- sys/gnu/dts/mips/PWH2004.dts
	+++ sys/gnu/dts/mips/PWH2004.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PWH2004", "ralink,rt3052-soc";
	+ compatible = "prolink,pwh2004", "ralink,rt3052-soc";
	model = "Prolink PWH2004";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	wifi {
	label = "pwh2004:red:wifi";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "pwh2004:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/PX-4885-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/PX-4885-4M.dts
	+++ sys/gnu/dts/mips/PX-4885-4M.dts
	@@ -2,6 +2,11 @@

	#include "PX-4885.dtsi"

	+/ {
	+ compatible = "7links,px-4885-4m", "7links,px-4885", "ralink,rt5350-soc";
	+ model = "7Links PX-4885 (4M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/PX-4885-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/PX-4885-8M.dts
	+++ sys/gnu/dts/mips/PX-4885-8M.dts
	@@ -2,6 +2,11 @@

	#include "PX-4885.dtsi"

	+/ {
	+ compatible = "7links,px-4885-8m", "7links,px-4885", "ralink,rt5350-soc";
	+ model = "7Links PX-4885 (8M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/PX-4885.dtsi
	===================================================================
	--- sys/gnu/dts/mips/PX-4885.dtsi
	+++ sys/gnu/dts/mips/PX-4885.dtsi
	@@ -1,8 +1,10 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "PX-4885", "ralink,rt5350-soc";
	- model = "7Links PX-4885";
	+ compatible = "7links,px-4885", "ralink,rt5350-soc";

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -12,8 +14,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -22,12 +24,12 @@

	orange {
	label = "px-4885:orange:wifi";
	- gpios = <&gpio0 18 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};

	blue {
	label = "px-4885:blue:storage";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/R6220.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/R6220.dts
	@@ -0,0 +1,158 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "netgear,r6220", "mediatek,mt7621-soc";
	+ model = "Netgear R6220";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "r6220:green:power";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "r6220:green:usb";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet {
	+ label = "r6220:green:wan";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi {
	+ label = "r6220:green:wifi";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "r6220:green:wps";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ wifi {
	+ label = "wifi";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usbpower {
	+ gpio-export,name = "usbpower";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x100000>;
	+ read-only;
	+ };
	+
	+ partition@100000 {
	+ label = "SC PID";
	+ reg = <0x100000 0x100000>;
	+ read-only;
	+ };
	+
	+ partition@200000 {
	+ label = "kernel";
	+ reg = <0x200000 0x400000>;
	+ };
	+
	+ partition@600000 {
	+ label = "ubi";
	+ reg = <0x600000 0x1c00000>;
	+ };
	+
	+ factory: partition@2e00000 {
	+ label = "factory";
	+ reg = <0x2e00000 0x100000>;
	+ read-only;
	+ };
	+
	+ partition@4200000 {
	+ label = "reserved";
	+ reg = <0x4200000 0x3c00000>;
	+ read-only;
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x00000004>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart3", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/RB750Gr3.dts
	===================================================================
	--- sys/gnu/dts/mips/RB750Gr3.dts
	+++ sys/gnu/dts/mips/RB750Gr3.dts
	@@ -2,13 +2,16 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Firefly FireWRT";
	+ compatible = "mikrotik,rb750gr3", "mediatek,mt7621-soc";
	+ model = "MikroTik RB750Gr3";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ reg = <0x0 0x10000000>;
	};

	chosen {
	@@ -18,9 +21,14 @@
	gpio-leds {
	compatible = "gpio-leds";

	- power {
	- label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	+ pwr {
	+ label = "rb750gr3:blue:pwr";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usr {
	+ label = "rb750gr3:green:usr";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -30,22 +38,35 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ mode {
	+ label = "mode";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};

	- power {
	- label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ res {
	+ label = "res";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	-};

	-&sdhci {
	- status = "okay";
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ buzzer {
	+ gpio-export,name = "buzzer";
	+ gpio-export,output = <0>;
	+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ usb {
	+ gpio-export,name = "usb";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	};

	&spi0 {
	@@ -56,8 +77,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -81,40 +102,24 @@
	label = "firmware";
	reg = <0x50000 0xfb0000>;
	};
	- };
	-};
	-
	-&pcie {
	- status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	- };
	- };

	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	- };
	};
	};

	&ethernet {
	mtd-mac-address = <&factory 0xe000>;
	+ mtd-mac-address-increment = <1>;
	};

	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2";
	+ ralink,group = "i2c", "uart2", "uart3", "pcie", "rgmii2", "jtag";
	ralink,function = "gpio";
	};
	};
	};
	+
	+&sdhci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/RBM33G.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/RBM33G.dts
	@@ -0,0 +1,156 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "mikrotik,rbm33g", "mediatek,mt7621-soc";
	+ model = "MikroTik RBM33G";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ usr {
	+ label = "rbm33g:green:usr";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ res {
	+ label = "res";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ pcie0_vcc_reg {
	+ compatible = "regulator-fixed";
	+ regulator-name = "pcie0_vcc";
	+
	+ regulator-min-microvolt = <3300000>;
	+ regulator-max-microvolt = <3300000>;
	+ gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ enable-active-high;
	+ regulator-boot-on;
	+ regulator-always-on;
	+ };
	+
	+ pcie1_vcc_reg {
	+ compatible = "regulator-fixed";
	+ regulator-name = "pcie1_vcc";
	+
	+ regulator-min-microvolt = <3300000>;
	+ regulator-max-microvolt = <3300000>;
	+ gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ enable-active-high;
	+ regulator-boot-on;
	+ regulator-always-on;
	+ };
	+
	+ pcie2_vcc_reg {
	+ compatible = "regulator-fixed";
	+ regulator-name = "pcie2_vcc";
	+
	+ regulator-min-microvolt = <3300000>;
	+ regulator-max-microvolt = <3300000>;
	+ gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ enable-active-high;
	+ regulator-boot-on;
	+ regulator-always-on;
	+ };
	+
	+ usb_vcc_reg {
	+ compatible = "regulator-fixed";
	+ regulator-name = "usb_vcc";
	+
	+ regulator-min-microvolt = <5000000>;
	+ regulator-max-microvolt = <5000000>;
	+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ enable-active-high;
	+ regulator-always-on;
	+ };
	+};
	+
	+
	+&spi0 {
	+ status = "okay";
	+
	+ w25q40@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <3125000>;
	+
	+ partition@0 {
	+ label = "routerboot";
	+ reg = <0x0 0xf000>;
	+ read-only;
	+ };
	+
	+ factory: partition@f000 {
	+ label = "factory";
	+ reg = <0xf000 0x71000>;
	+ read-only;
	+ };
	+
	+ };
	+
	+ w25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <1>;
	+ spi-max-frequency = <3125000>;
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x040000 0xFC0000>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x0010>;
	+ mtd-mac-address-increment = <1>;
	+};
	+
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart2", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&i2c {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/RE350.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/RE350.dts
	@@ -0,0 +1,164 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,re350-v1", "mediatek,mt7621-soc";
	+ model = "TP-LINK RE350 v1";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "re350-v1:blue:power";
	+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi2g {
	+ label = "re350-v1:blue:wifi2G";
	+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi5g {
	+ label = "re350-v1:blue:wifi5G";
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps_r {
	+ label = "re350-v1:red:wps";
	+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wps_b {
	+ label = "re350-v1:blue:wps";
	+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ eth {
	+ label = "re350-v1:green:eth_act";
	+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ eth2 {
	+ label = "re350-v1:green:eth_link";
	+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ led {
	+ label = "led";
	+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ power {
	+ label = "power";
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ w25q64@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x5e0000>;
	+ };
	+
	+ config: partition@600000 {
	+ label = "config";
	+ reg = <0x600000 0x50000>;
	+ read-only;
	+ };
	+
	+ radio: partition@7f0000 {
	+ label = "radio";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 0>;
	+ mtd-mac-address = <&config 0x10008>;
	+ mtd-mac-address-increment = <1>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&radio 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&config 0x10008>;
	+ mtd-mac-address-increment = <2>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&config 0x10008>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "rgmii2", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/RE6500.dts
	===================================================================
	--- sys/gnu/dts/mips/RE6500.dts
	+++ sys/gnu/dts/mips/RE6500.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "linksys,re6500", "mediatek,mt7621-soc";
	model = "Linksys RE6500";

	memory@0 {
	@@ -20,12 +23,12 @@

	wifi {
	label = "re6500:orange:wifi";
	- gpios = <&gpio0 0 0>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};

	power {
	label = "re6500:white:power";
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -37,14 +40,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 11 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -57,8 +60,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -102,7 +105,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -111,7 +114,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	@@ -119,3 +122,7 @@
	&ethernet {
	mtd-mac-address = <&factory 0x2e>;
	};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/RP-N53.dts
	===================================================================
	--- sys/gnu/dts/mips/RP-N53.dts
	+++ sys/gnu/dts/mips/RP-N53.dts
	@@ -2,6 +2,9 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "asus,rp-n53", "ralink,mt7620a-soc";
	model = "Asus RP-N53";
	@@ -14,26 +17,26 @@

	touch {
	label = "touch";
	- gpios = <&gpio1 0 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 1 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	audio {
	label = "audio";
	- gpios = <&gpio1 3 0>;
	- linux,code = <0x101>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_1>;
	};
	};

	@@ -42,42 +45,42 @@

	backlight {
	label = "rp-n53:white:back";
	- gpios = <&gpio1 4 1>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	};

	wifi0 {
	label = "rp-n53:blue:5g3";
	- gpios = <&gpio1 5 1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};

	wifi1 {
	label = "rp-n53:blue:5g2";
	- gpios = <&gpio1 6 1>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "rp-n53:blue:5g1";
	- gpios = <&gpio1 7 1>;
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	};

	wifi3 {
	label = "rp-n53:blue:wifi";
	- gpios = <&gpio1 8 1>;
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	};

	wifi4 {
	label = "rp-n53:blue:2g1";
	- gpios = <&gpio1 9 1>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};

	wifi5 {
	label = "rp-n53:blue:2g2";
	- gpios = <&gpio1 10 1>;
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	};

	wifi6 {
	label = "rp-n53:blue:2g3";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -104,7 +107,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -161,4 +163,13 @@

	&pcie {
	status = "okay";
	+
	+ pcie-bridge {
	+ wifi@1814,5592 {
	+ compatible = "pci1814,5592";
	+ reg = <0x0000 0 0 0 0>;
	+ ralink,2ghz = <0>;
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	+ };
	+ };
	};
	Index: sys/gnu/dts/mips/RT-AC51U.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-AC51U.dts
	+++ sys/gnu/dts/mips/RT-AC51U.dts
	@@ -1,37 +1,30 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
	- model = "Asus RT-N14U";
	+ compatible = "asus,rt-ac51u", "ralink,mt7620a-soc";
	+ model = "Asus RT-AC51U";

	gpio-leds {
	compatible = "gpio-leds";

	- wan {
	- label = "rt-n14u:blue:wan";
	- gpios = <&gpio2 0 1>;
	- };
	-
	- lan {
	- label = "rt-n14u:blue:lan";
	- gpios = <&gpio2 1 1>;
	+ power {
	+ label = "rt-ac51u:blue:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	usb {
	- label = "rt-n14u:blue:usb";
	- gpios = <&gpio2 2 1>;
	- };
	-
	- power {
	- label = "rt-n14u:blue:power";
	- gpios = <&gpio2 3 1>;
	+ label = "rt-ac51u:blue:usb";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	- air {
	- label = "rt-n14u:blue:air";
	- gpios = <&gpio3 0 1>;
	+ wifi {
	+ label = "rt-ac51u:blue:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,24 +36,27 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	-};

	-&gpio2 {
	- status = "okay";
	-};
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;

	-&gpio3 {
	- status = "okay";
	+ enable-leds {
	+ gpio-export,name = "enable-leds";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	};

	&spi0 {
	@@ -71,7 +67,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -107,7 +102,12 @@
	status = "okay";
	};

	+&gpio3 {
	+ status = "okay";
	+};
	+
	&ethernet {
	+ status = "okay";
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	};
	@@ -118,8 +118,8 @@

	&pinctrl {
	state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "i2c";
	+ gpio {
	+ ralink,group = "i2c", "wled", "uartf";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/RT-G32-B1.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-G32-B1.dts
	+++ sys/gnu/dts/mips/RT-G32-B1.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RT-G32-B1", "ralink,rt3050-soc";
	+ compatible = "asus,rt-g32-b1", "ralink,rt3050-soc";
	model = "Asus RT-G32 B1";

	gpio-keys-polled {
	@@ -14,14 +17,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -34,7 +37,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/RT-N10-PLUS.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N10-PLUS.dts
	+++ sys/gnu/dts/mips/RT-N10-PLUS.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
	+ compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
	model = "Asus RT-N10+";

	cfi@1f000000 {
	@@ -43,7 +46,7 @@

	wps {
	label = "rt-n10-plus:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -55,14 +58,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/RT-N12-PLUS.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N12-PLUS.dts
	+++ sys/gnu/dts/mips/RT-N12-PLUS.dts
	@@ -2,36 +2,38 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
	- model = "Asus RT-N14U";
	+ compatible = "asus,rt-n12p", "ralink,mt7620n-soc";
	+ model = "Asus RT-N12+";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };

	gpio-leds {
	compatible = "gpio-leds";

	wan {
	- label = "rt-n14u:blue:wan";
	- gpios = <&gpio2 0 1>;
	+ label = "rt-n12p:green:wan";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};

	lan {
	- label = "rt-n14u:blue:lan";
	- gpios = <&gpio2 1 1>;
	- };
	-
	- usb {
	- label = "rt-n14u:blue:usb";
	- gpios = <&gpio2 2 1>;
	+ label = "rt-n12p:green:lan";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	power {
	- label = "rt-n14u:blue:power";
	- gpios = <&gpio2 3 1>;
	+ label = "rt-n12p:green:power";
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	air {
	- label = "rt-n14u:blue:air";
	- gpios = <&gpio3 0 1>;
	+ label = "rt-n12p:green:air";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,18 +45,16 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	-
	- wps {
	- label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	&gpio2 {
	status = "okay";
	};
	@@ -71,7 +71,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -99,14 +98,6 @@
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	@@ -119,7 +110,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	default {
	- ralink,group = "ephy", "wled", "i2c";
	+ ralink,group = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/RT-N13U.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N13U.dts
	+++ sys/gnu/dts/mips/RT-N13U.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RT-N13U", "ralink,rt3052-soc";
	+ compatible = "asus,rt-n13u", "ralink,rt3052-soc";
	model = "Asus RT-N13U";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	power {
	label = "rt-n13u:blue:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "rt-n13u:blue:wifi";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/RT-N14U.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N14U.dts
	+++ sys/gnu/dts/mips/RT-N14U.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
	model = "Asus RT-N14U";
	@@ -11,27 +14,27 @@

	wan {
	label = "rt-n14u:blue:wan";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "rt-n14u:blue:lan";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "rt-n14u:blue:usb";
	- gpios = <&gpio2 2 1>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "rt-n14u:blue:power";
	- gpios = <&gpio2 3 1>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	air {
	label = "rt-n14u:blue:air";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -43,14 +46,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -71,7 +74,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/RT-N15.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N15.dts
	+++ sys/gnu/dts/mips/RT-N15.dts
	@@ -2,10 +2,13 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "RT-N15", "ralink,rt2880-soc";
	+ compatible = "asus,rt-n15", "ralink,rt2880-soc";
	model = "Asus RT-N15";

	cfi@1f000000 {
	@@ -42,8 +45,8 @@

	rtl8366s {
	compatible = "realtek,rtl8366s";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

	gpio-keys-polled {
	@@ -54,14 +57,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 12 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -70,7 +73,7 @@

	power {
	label = "rt-n15:blue:power";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/RT-N56U.dts
	===================================================================
	--- sys/gnu/dts/mips/RT-N56U.dts
	+++ sys/gnu/dts/mips/RT-N56U.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RT-N56U", "ralink,rt3883-soc";
	+ compatible = "asus,rt-n56u", "ralink,rt3883-soc";
	model = "Asus RT-N56U";

	nor-flash@1c000000 {
	@@ -39,8 +42,8 @@

	rtl8367 {
	compatible = "realtek,rtl8367";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
	};

	@@ -52,14 +55,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -68,22 +71,22 @@

	power {
	label = "rt-n56u:blue:power";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "rt-n56u:blue:lan";
	- gpios = <&gpio0 19 1>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	};

	wan {
	label = "rt-n56u:blue:wan";
	- gpios = <&gpio1 3 1>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "rt-n56u:blue:usb";
	- gpios = <&gpio1 0 1>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -125,10 +128,10 @@
	pci-bridge@1 {
	status = "okay";

	- wmac@0,0 {
	- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
	- reg = < 0x10000 0 0 0 0 >;
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	+ wifi@1814,3091 {
	+ compatible = "pci1814,3091";
	+ reg = <0x10000 0 0 0 0>;
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	===================================================================
	--- sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	+++ sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
	@@ -1,9 +1,11 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "RT5350F-OLINUXINO.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>

	/ {
	- compatible = "RT5350F-OLINUXINO-EVB", "ralink,rt5350-soc";
	+ compatible = "olimex,rt5350f-olinuxino-evb", "ralink,rt5350-soc";
	model = "Olimex RT5350F-OLinuXino-EVB";

	gpio_export {
	@@ -13,88 +15,18 @@
	relay1 {
	gpio-export,name = "relay1";
	gpio-export,output = <0>;
	- gpios = <&gpio0 14 0>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	};

	relay2 {
	gpio-export,name = "relay2";
	gpio-export,output = <0>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};

	button {
	gpio-export,name = "button";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};
	};
	};
	-
	-&spi0 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	-};
	-
	-&gpio1 {
	- status = "okay";
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	===================================================================
	--- sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	+++ sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
	@@ -1,78 +1,8 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "RT5350F-OLINUXINO.dtsi"

	/ {
	- compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
	+ compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
	model = "Olimex RT5350F-OLinuXino";
	};
	-
	-&spi0 {
	- status = "okay";
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x3b0000>;
	- };
	- };
	-};
	-
	-&gpio1 {
	- status = "okay";
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/RT5350F-OLINUXINO.dtsi
	===================================================================
	--- sys/gnu/dts/mips/RT5350F-OLINUXINO.dtsi
	+++ sys/gnu/dts/mips/RT5350F-OLINUXINO.dtsi
	@@ -1,19 +1,14 @@
	-/dts-v1/;
	-
	#include "rt5350.dtsi"

	/ {
	- compatible = "WIZARD8800", "ralink,rt5350-soc";
	- model = "EASYACC WI-STOR WIZARD 8800";
	-};
	+ compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";

	-&gpio0 {
	- status = "okay";
	+ aliases {
	+ serial0 = &uartlite;
	+ serial1 = &uart;
	+ };
	};

	-&gpio1 {
	- status = "okay";
	-};

	&spi0 {
	status = "okay";
	@@ -23,7 +18,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -51,12 +45,20 @@
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "jtag", "rgmii", "mdio";
	ralink,function = "gpio";
	};
	+ uartf_gpio {
	+ ralink,group = "uartf";
	+ ralink,function = "gpio uartf";
	+ };
	};
	};

	@@ -66,6 +68,12 @@

	&esw {
	mediatek,portmap = <0x2f>;
	+ mediatek,led_polarity = <0x17>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+ ralink,led-polarity = <1>;
	};

	&ehci {
	@@ -76,6 +84,11 @@
	status = "okay";
	};

	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	+&i2c {
	+ status = "okay";
	};
	+
	+&uart {
	+ status = "okay";
	+};
	+
	Index: sys/gnu/dts/mips/RUT5XX.dts
	===================================================================
	--- sys/gnu/dts/mips/RUT5XX.dts
	+++ sys/gnu/dts/mips/RUT5XX.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "RUT5XX", "ralink,rt3050-soc";
	+ compatible = "teltonika,rut5xx", "ralink,rt3050-soc";
	model = "Teltonika RUT5XX";

	gpio-leds {
	@@ -11,7 +14,7 @@

	status {
	label = "rut5xx:green:status";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,7 +40,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "n25q128a13";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/SAP-G3200U3.dts
	===================================================================
	--- sys/gnu/dts/mips/SAP-G3200U3.dts
	+++ sys/gnu/dts/mips/SAP-G3200U3.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "storylink,sap-g3200u3", "mediatek,mt7621-soc";
	model = "STORYLiNK SAP-G3200U3";

	memory@0 {
	@@ -20,7 +23,7 @@

	usb {
	label = "sap-g3200u3:green:usb";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +35,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 16 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	rfkill {
	label = "rfkill";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};
	@@ -52,8 +55,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -94,7 +97,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -103,7 +106,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/SK-WB8.dts
	===================================================================
	--- sys/gnu/dts/mips/SK-WB8.dts
	+++ sys/gnu/dts/mips/SK-WB8.dts
	@@ -1,9 +1,11 @@
	/dts-v1/;

	#include "mt7621.dtsi"
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>

	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "samknows,whitebox-v8", "mediatek,mt7621-soc";
	model = "SamKnows Whitebox 8";

	memory@0 {
	@@ -20,12 +22,12 @@

	wps {
	label = "sk-wb8:green:wps";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "sk-wb8:green:usb";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -36,13 +38,13 @@
	poll-interval = <20>;
	wps {
	label = "wps";
	- gpios = <&gpio1 11 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	reset {
	label = "reset";
	- gpios = <&gpio1 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -55,8 +57,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -77,12 +79,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	- };
	-
	- partition@e30000 {
	- label = "recovery";
	- reg = <0xe30000 0x1d0000>;
	+ reg = <0x50000 0xfb0000>;
	};

	};
	@@ -96,7 +93,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -105,7 +102,6 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/SL-R7205.dts
	===================================================================
	--- sys/gnu/dts/mips/SL-R7205.dts
	+++ sys/gnu/dts/mips/SL-R7205.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "SL-R7205", "ralink,rt3052-soc";
	+ compatible = "skyline,sl-r7205", "ralink,rt3052-soc";
	model = "Skyline SL-R7205 Wireless 3G Router";

	cfi@1f000000 {
	@@ -43,7 +46,7 @@

	wifi {
	label = "sl-r7205:green:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -55,14 +58,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/TEW-638APB-V2.dts
	===================================================================
	--- sys/gnu/dts/mips/TEW-638APB-V2.dts
	+++ sys/gnu/dts/mips/TEW-638APB-V2.dts
	@@ -2,13 +2,16 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WCR150GN", "ralink,rt3050-soc";
	- model = "Sparklan WCR-150GN";
	+ compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
	+ model = "TRENDnet TEW-638APB v2";

	cfi@1f000000 {
	compatible = "cfi-flash";
	- reg = <0x1f000000 0x800000>;
	+ reg = <0x1f000000 0x400000>;
	bank-width = <2>;
	device-width = <2>;
	#address-cells = <1>;
	@@ -38,36 +41,36 @@
	};
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- user {
	- label = "wcr-150gn:amber:user";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- power {
	- label = "wcr-150gn:amber:power";
	- gpios = <&gpio0 8 1>;
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	wps {
	label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	+ };

	- reset {
	- label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wps {
	+ label = "tew-638apb-v2:orange:wps";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps2 {
	+ label = "tew-638apb-v2:green:wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -75,7 +78,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "uartf";
	ralink,function = "gpio";
	};
	};
	@@ -92,7 +95,3 @@
	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-
	-&otg {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/TEW-691GR.dts
	===================================================================
	--- sys/gnu/dts/mips/TEW-691GR.dts
	+++ sys/gnu/dts/mips/TEW-691GR.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "TEW-691GR", "ralink,rt3883-soc";
	+ compatible = "trendnet,tew-691gr", "ralink,rt3883-soc";
	model = "TRENDnet TEW-691GR";

	nor-flash@1c000000 {
	@@ -45,20 +48,20 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	rfkill {
	label = "rfkill";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};

	@@ -67,7 +70,7 @@

	wps {
	label = "tew-691gr:green:wps";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -86,7 +89,7 @@
	};

	&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	+ mtd-mac-address = <&factory 0x4>;

	port@0 {
	phy-handle = <&phy0>;
	@@ -98,10 +101,15 @@

	phy0: ethernet-phy@0 {
	reg = <0>;
	+ phy-mode = "rgmii";
	};
	};
	};

	&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x0>;
	ralink,5ghz = <0>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mtd-mac-address-increment = <1>;
	};
	Index: sys/gnu/dts/mips/TEW-692GR.dts
	===================================================================
	--- sys/gnu/dts/mips/TEW-692GR.dts
	+++ sys/gnu/dts/mips/TEW-692GR.dts
	@@ -2,8 +2,11 @@

	#include "rt3883.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "TEW-692GR", "ralink,rt3883-soc";
	+ compatible = "trendnet,tew-692gr", "ralink,rt3883-soc";
	model = "TRENDnet TEW-692GR";

	nor-flash@1c000000 {
	@@ -45,14 +48,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -61,12 +64,12 @@

	wps {
	label = "tew-692gr:orange:wps";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps2 {
	label = "tew-692gr:green:wps";
	- gpios = <&gpio1 4 1>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -86,7 +89,7 @@

	&ethernet {
	status = "okay";
	- mtd-mac-address = <&factory 0x28>;
	+ mtd-mac-address = <&factory 0x4>;

	port@0 {
	phy-handle = <&phy0>;
	@@ -98,6 +101,19 @@

	phy0: ethernet-phy@0 {
	reg = <0>;
	+ phy-mode = "rgmii";
	+
	+ qca,ar8327-initvals = <
	+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
	+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
	+ 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
	+ 0x50 0xc437c437 /* LED Control Register 0 */
	+ 0x54 0xc337c337 /* LED Control Register 1 */
	+ 0x58 0x00000000 /* LED Control Register 2 */
	+ 0x5c 0x03ffff00 /* LED Control Register 3 */
	+ 0x7c 0x0000007e /* PORT0_STATUS */
	+ 0x94 0x0000007e /* PORT6 STATUS */
	+ >;
	};
	};
	};
	@@ -117,10 +133,20 @@
	host-bridge {
	pci-bridge@1 {
	status = "okay";
	+
	+ wifi@0,0 {
	+ compatible = "pci0,0";
	+ reg = < 0x10000 0 0 0 0 >;
	+ ralink,2ghz = <0>;
	+ };
	};
	};
	};

	&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x0>;
	ralink,5ghz = <0>;
	+ mtd-mac-address = <&factory 0x4>;
	+ mtd-mac-address-increment = <3>;
	};
	Index: sys/gnu/dts/mips/TEW-714TRU.dts
	===================================================================
	--- sys/gnu/dts/mips/TEW-714TRU.dts
	+++ sys/gnu/dts/mips/TEW-714TRU.dts
	@@ -2,21 +2,24 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "MPRA2", "ralink,rt5350-soc";
	- model = "HAME MPR-A2";
	+ compatible = "trendnet,tew-714tru", "ralink,rt5350-soc";
	+ model = "TRENDnet TEW714TRU";

	gpio-leds {
	compatible = "gpio-leds";

	- system {
	- label = "mpr-a2:blue:system";
	- gpios = <&gpio0 20 1>;
	+ usb {
	+ label = "tew-714tru:red:usb";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	- power {
	- label = "mpr-a2:red:power";
	- gpios = <&gpio0 17 1>;
	+ wifi {
	+ label = "tew-714tru:green:wifi";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -26,27 +29,31 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	- };
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	};

	gpio_export {
	compatible = "gpio-export";
	#size-cells = <0>;

	- usb {
	- gpio-export,name = "usb";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	+ repeater {
	+ gpio-export,name = "repeater_switch";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	- root_hub {
	- gpio-export,name = "root_hub";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ wisp {
	+ gpio-export,name = "wisp_switch";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -59,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -90,7 +96,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "i2c", "jtag", "uartf";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/TINY-AC.dts
	===================================================================
	--- sys/gnu/dts/mips/TINY-AC.dts
	+++ sys/gnu/dts/mips/TINY-AC.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "TINY-AC", "ralink,mt7620a-soc";
	+ compatible = "dovado,tiny-ac", "ralink,mt7620a-soc";
	model = "Dovado Tiny AC";

	chosen {
	@@ -15,12 +18,12 @@

	usb {
	label = "tiny-ac:green:usb";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "tiny-ac:orange:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	};
	@@ -33,8 +36,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 13 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	};
	@@ -46,7 +49,7 @@
	usbpower {
	gpio-export,name = "usbpower";
	gpio-export,output = <1>;
	- gpios = <&gpio2 5 0>;
	+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -71,7 +74,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -145,10 +147,6 @@
	mediatek,mt7530 = <1>;
	};

	-&wmac {
	- ralink,eeprom = "rt2x00pci_1_0.eeprom";
	-};
	-
	&pcie {
	status = "okay";
	};
	Index: sys/gnu/dts/mips/TL-MR3420V5.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-MR3420V5.dts
	@@ -0,0 +1,86 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-mr3420-v5", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-MR3420 v5";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "tl-mr3420-v5:green:lan";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "tl-mr3420-v5:green:power";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "tl-mr3420-v5:green:usb";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "tl-mr3420-v5:green:wan";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_amber {
	+ label = "tl-mr3420-v5:amber:wan";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-mr3420-v5:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-mr3420-v5:green:wps";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR840NV4.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR840NV4.dts
	@@ -0,0 +1,62 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr840n-v4", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR840N v4";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "tl-wr840n-v4:green:lan";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "tl-wr840n-v4:green:power";
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "tl-wr840n-v4:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-wr840n-v4:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-wr840n-v4:green:wps";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "p0led_an", "p2led_an", "perst", "refclk", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR840NV5.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR840NV5.dts
	@@ -0,0 +1,105 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr840n-v5", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR840N v5";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+ /* LED used is dual-color,dual lead LED */
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "tl-wr840n-v5:green:power";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ orange {
	+ label = "tl-wr840n-v5:orange:power";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x3d0000>;
	+ };
	+
	+ factory: partition@3f0000 {
	+ label = "factory";
	+ reg = <0x3f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "disabled";
	+};
	+
	+&ohci {
	+ status = "disabled";
	+};
	+
	+&wmac {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0xf100>;
	+ mediatek,mtd-eeprom = <&factory 0x10000>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xf100>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "p0led_an", "p2led_an", "perst";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR841NV13.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR841NV13.dts
	@@ -0,0 +1,88 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr841n-v13", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR841N v13";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "tl-wr841n-v13:green:power";
	+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-wr841n-v13:green:wps";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan1 {
	+ label = "tl-wr841n-v13:green:lan1";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2 {
	+ label = "tl-wr841n-v13:green:lan2";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan3 {
	+ label = "tl-wr841n-v13:green:lan3";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan4 {
	+ label = "tl-wr841n-v13:green:lan4";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_green {
	+ label = "tl-wr841n-v13:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_orange {
	+ label = "tl-wr841n-v13:orange:wan";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-wr841n-v13:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "perst", "refclk", "uart1", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR842NV5.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR842NV5.dts
	@@ -0,0 +1,86 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr842n-v5", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR842N v5";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "tl-wr842n-v5:green:lan";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "tl-wr842n-v5:green:power";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "tl-wr842n-v5:green:usb";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "tl-wr842n-v5:green:wan";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan_amber {
	+ label = "tl-wr842n-v5:amber:wan";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-wr842n-v5:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-wr842n-v5:green:wps";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TL-WR902ACV3.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TL-WR902ACV3.dts
	@@ -0,0 +1,108 @@
	+/dts-v1/;
	+
	+#include "TPLINK-8M.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
	+ model = "TP-Link TL-WR902AC v3";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ sw1 {
	+ label = "sw1";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+
	+ sw2 {
	+ label = "sw2";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ lan {
	+ label = "tl-wr902ac-v3:green:lan";
	+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power {
	+ label = "tl-wr902ac-v3:green:power";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "tl-wr902ac-v3:green:usb";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "tl-wr902ac-v3:green:wan";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "tl-wr902ac-v3:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "tl-wr902ac-v3:green:wps";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie-bridge {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x28000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ mtd-mac-address = <&factory 0xf100>;
	+ mtd-mac-address-increment = <(-1)>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/TPLINK-8M.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/TPLINK-8M.dtsi
	@@ -0,0 +1,67 @@
	+#include "mt7628an.dtsi"
	+
	+/ {
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "boot";
	+ reg = <0x0 0x20000>;
	+ read-only;
	+ };
	+
	+ partition@20000 {
	+ label = "firmware";
	+ reg = <0x20000 0x7a0000>;
	+ };
	+
	+ partition@7c0000 {
	+ label = "config";
	+ reg = <0x7c0000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@7d0000 {
	+ label = "factory";
	+ reg = <0x7d0000 0x30000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "disabled";
	+};
	+
	+&ohci {
	+ status = "disabled";
	+};
	+
	+&wmac {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0xf100>;
	+ mediatek,mtd-eeprom = <&factory 0x20000>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xf100>;
	+ mediatek,portmap = "llllw";
	+};
	Index: sys/gnu/dts/mips/Timecloud.dts
	===================================================================
	--- sys/gnu/dts/mips/Timecloud.dts
	+++ sys/gnu/dts/mips/Timecloud.dts
	@@ -1,10 +1,18 @@
	/dts-v1/;

	-#include "mt7620a.dtsi"
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "ralink,mt7620a-soc";
	- model = "OY-0001";
	+ compatible = "thunder,timecloud", "mediatek,mt7621-soc";
	+ model = "Thunder Timecloud";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -13,15 +21,16 @@
	gpio-leds {
	compatible = "gpio-leds";

	- powerled {
	- label = "oy-0001:green:power";
	- gpios = <&gpio0 9 1>;
	+ statw {
	+ label = "timecloud:white:status";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	- wifiled {
	- label = "oy-0001:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ stato {
	+ label = "timecloud:orange:status";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	};
	+
	};

	gpio-keys-polled {
	@@ -30,20 +39,25 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- s1 {
	+ reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ BTN_0 {
	+ label = "BTN_0";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};

	-&gpio2 {
	+&sdhci {
	status = "okay";
	-};

	-&gpio3 {
	- status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	};

	&spi0 {
	@@ -54,8 +68,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -82,41 +96,15 @@
	};
	};

	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	+ ralink,group = "i2c", "uart2", "jtag";
	ralink,function = "gpio";
	};
	};
	};
	-
	-&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	- mediatek,portmap = "llllw";
	-};
	-
	-&gsw {
	- mediatek,port4 = "ephy";
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&sdhci {
	- status = "okay";
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	-&pcie {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/U25AWF-H1.dts
	===================================================================
	--- sys/gnu/dts/mips/U25AWF-H1.dts
	+++ sys/gnu/dts/mips/U25AWF-H1.dts
	@@ -1,10 +1,13 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "mt7620a.dtsi"

	-/ {
	- compatible = "wt3020", "ralink,mt7620n-soc";
	- model = "Nexx WT3020";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/{
	+ compatible = "kimax,u25awf-h1","ralink,mt7620a-soc";
	+ model = "Kimax U25AWF-H1";

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -14,17 +17,22 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	gpio-leds {
	compatible = "gpio-leds";

	- power {
	- label = "wt3020:blue:power";
	- gpios = <&gpio3 0 0>;
	+ wifi {
	+ label = "u25awf:red:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan {
	+ label = "u25awf:green:lan";
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -45,7 +53,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -68,7 +75,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0xfb0000>;
	};
	};
	};
	@@ -83,7 +90,6 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	};

	&wmac {
	@@ -93,7 +99,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	+ ralink,group = "uartf", "ephy", "wled";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/U7621-06-256M-16M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/U7621-06-256M-16M.dts
	@@ -0,0 +1,86 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "U7621-06.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "unielec,u7621-06-256m-16m", "unielec,u7621-06", "mediatek,mt7621-soc";
	+ model = "UniElec U7621-06 (256M RAM/16M flash)";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <14000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "bootloader";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ firmware: partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/U7621-06.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/U7621-06.dtsi
	@@ -0,0 +1,117 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "unielec,u7621-06", "mediatek,mt7621-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ modem_reset {
	+ gpio-export,name = "modem_reset";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "u7621-06:green:status";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ led4 {
	+ label = "u7621-06:green:led4";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ led5 {
	+ label = "u7621-06:green:led5";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&sdhci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&sdhci_pins>;
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+ mediatek,portmap = "llllw";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "jtag", "uart2", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/U7628-01-128M-16M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/U7628-01-128M-16M.dts
	@@ -0,0 +1,83 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "U7628-01.dtsi"
	+
	+/ {
	+ compatible = "unielec,u7628-01-128m-16m", "unielec,u7628-01", "mediatek,mt7628an-soc";
	+ model = "UniElec U7628-01 (128M RAM/16M flash)";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <12000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "bootloader";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/U7628-01.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/U7628-01.dtsi
	@@ -0,0 +1,132 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * Copyright(c) 2017 Piotr Dymacz <pepe2k@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "unielec,u7628-01", "mediatek,mt7628an-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "u7628-01:green:power";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan {
	+ label = "u7628-01:green:wlan";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wan {
	+ label = "u7628-01:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan1 {
	+ label = "u7628-01:green:lan1";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan2 {
	+ label = "u7628-01:green:lan2";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan3 {
	+ label = "u7628-01:green:lan3";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ lan4 {
	+ label = "u7628-01:green:lan4";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "u7628-01:green:usb";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&gpio0 {
	+ status = "okay";
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pcie {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "wdt", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/UBNT-ER-e50.dtsi
	===================================================================
	--- sys/gnu/dts/mips/UBNT-ER-e50.dtsi
	+++ sys/gnu/dts/mips/UBNT-ER-e50.dtsi
	@@ -1,12 +1,10 @@
	-#include <dt-bindings/input/input.h>
	-
	-/dts-v1/;
	-
	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "UBNT-ERX";
	+ compatible = "ubiquiti,edgerouterx", "mediatek,mt7621-soc";

	memory@0 {
	device_type = "memory";
	@@ -17,43 +15,6 @@
	bootargs = "console=ttyS0,57600";
	};

	- nand@1e003000 {
	- status = "okay";
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x80000>;
	- read-only;
	- };
	-
	- partition@80000 {
	- label = "u-boot-env";
	- reg = <0x80000 0x60000>;
	- read-only;
	- };
	-
	- factory: partition@e0000 {
	- label = "factory";
	- reg = <0xe0000 0x60000>;
	- };
	-
	- partition@140000 {
	- label = "kernel1";
	- reg = <0x140000 0x300000>;
	- };
	-
	- partition@440000 {
	- label = "kernel2";
	- reg = <0x440000 0x300000>;
	- };
	-
	- partition@740000 {
	- label = "ubi";
	- reg = <0x740000 0xf7c0000>;
	- };
	-
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	@@ -62,7 +23,7 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_RESTART>;
	};
	};
	@@ -72,6 +33,42 @@
	mtd-mac-address = <&factory 0x22>;
	};

	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@80000 {
	+ label = "u-boot-env";
	+ reg = <0x80000 0x60000>;
	+ read-only;
	+ };
	+
	+ factory: partition@e0000 {
	+ label = "factory";
	+ reg = <0xe0000 0x60000>;
	+ };
	+
	+ partition@140000 {
	+ label = "kernel1";
	+ reg = <0x140000 0x300000>;
	+ };
	+
	+ partition@440000 {
	+ label = "kernel2";
	+ reg = <0x440000 0x300000>;
	+ };
	+
	+ partition@740000 {
	+ label = "ubi";
	+ reg = <0x740000 0xf7c0000>;
	+ };
	+};
	+
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	@@ -81,27 +78,20 @@
	};
	};

	-&sdhci {
	- status = "disabled";
	-};
	-
	-&pcie {
	- status = "disabled";
	-};
	-
	&spi0 {
	/* This board has 2Mb spi flash soldered in and visible
	from manufacturer's firmware.
	But this SoC shares spi and nand pins,
	and current driver does't handle this sharing well */
	status = "disabled";
	+
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <1>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "spi";
	@@ -110,3 +100,7 @@
	};
	};
	};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/UBNT-ERX-SFP.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/UBNT-ERX-SFP.dts
	@@ -0,0 +1,24 @@
	+/dts-v1/;
	+
	+#include "UBNT-ER-e50.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ model = "UBNT-ERX-SFP";
	+ compatible = "ubiquiti,edgerouterx-sfp", "mediatek,mt7621-soc";
	+
	+ i2c-gpio {
	+ compatible = "i2c-gpio";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* sda */
	+ &gpio0 4 GPIO_ACTIVE_HIGH /* scl */
	+ >;
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ pca9555@25 {
	+ compatible = "pca9555";
	+ reg = <0x25>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/UBNT-ERX.dts
	===================================================================
	--- sys/gnu/dts/mips/UBNT-ERX.dts
	+++ sys/gnu/dts/mips/UBNT-ERX.dts
	@@ -1,112 +1,7 @@
	-#include <dt-bindings/input/input.h>
	-
	/dts-v1/;

	-#include "mt7621.dtsi"
	+#include "UBNT-ER-e50.dtsi"

	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	model = "UBNT-ERX";
	-
	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x10000000>;
	- };
	-
	- chosen {
	- bootargs = "console=ttyS0,57600";
	- };
	-
	- nand@1e003000 {
	- status = "okay";
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x80000>;
	- read-only;
	- };
	-
	- partition@80000 {
	- label = "u-boot-env";
	- reg = <0x80000 0x60000>;
	- read-only;
	- };
	-
	- factory: partition@e0000 {
	- label = "factory";
	- reg = <0xe0000 0x60000>;
	- };
	-
	- partition@140000 {
	- label = "kernel1";
	- reg = <0x140000 0x300000>;
	- };
	-
	- partition@440000 {
	- label = "kernel2";
	- reg = <0x440000 0x300000>;
	- };
	-
	- partition@740000 {
	- label = "ubi";
	- reg = <0x740000 0xf7c0000>;
	- };
	-
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <KEY_RESTART>;
	- };
	- };
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x22>;
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&sdhci {
	- status = "disabled";
	-};
	-
	-&pcie {
	- status = "disabled";
	-};
	-
	-&spi0 {
	- /* This board has 2Mb spi flash soldered in and visible
	- from manufacturer's firmware.
	- But this SoC shares spi and nand pins,
	- and current driver does't handle this sharing well */
	- status = "disabled";
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <1>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "spi";
	- reg = <0x0 0x200000>;
	- read-only;
	- };
	- };
	};
	Index: sys/gnu/dts/mips/UR-326N4G.dts
	===================================================================
	--- sys/gnu/dts/mips/UR-326N4G.dts
	+++ sys/gnu/dts/mips/UR-326N4G.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "UR-326N4G", "ralink,rt3052-soc";
	+ compatible = "upvel,ur-326n4g", "ralink,rt3052-soc";
	model = "UPVEL UR-326N4G";

	cfi@1f000000 {
	@@ -43,27 +46,27 @@

	3g {
	label = "ur-326n4g:green:3g";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	gateway {
	label = "ur-326n4g:green:gateway";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	ap {
	label = "ur-326n4g:green:ap";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "ur-326n4g:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	station {
	label = "ur-326n4g:green:station";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -75,14 +78,14 @@

	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x32>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/UR-336UN.dts
	===================================================================
	--- sys/gnu/dts/mips/UR-336UN.dts
	+++ sys/gnu/dts/mips/UR-336UN.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "UR-336UN", "ralink,rt3052-soc";
	+ compatible = "upvel,ur-336un", "ralink,rt3052-soc";
	model = "UPVEL UR-336UN";

	cfi@1f000000 {
	@@ -13,6 +16,29 @@
	device-width = <2>;
	#address-cells = <1>;
	#size-cells = <1>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7b0000>;
	+ };
	};

	gpio-leds {
	@@ -20,27 +46,27 @@

	3g {
	label = "ur-336un:green:3g";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	gateway {
	label = "ur-336un:green:gateway";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	ap {
	label = "ur-336un:green:ap";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "ur-336un:green:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	station {
	label = "ur-336un:green:station";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -52,14 +78,14 @@

	reset_wps {
	label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x32>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	@@ -73,20 +99,18 @@
	};
	};

	-/* FIXME: no partitions defined */
	-/*&ethernet {
	+&ethernet {
	mtd-mac-address = <&factory 0x4004>;
	};
	-*/
	+
	&esw {
	mediatek,portmap = <0x2f>;
	};

	-/* FIXME: no partitions defined */
	-/*&wmac {
	+&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-*/
	+
	&otg {
	status = "okay";
	};
	Index: sys/gnu/dts/mips/V11STFE.dts
	===================================================================
	--- sys/gnu/dts/mips/V11STFE.dts
	+++ sys/gnu/dts/mips/V11STFE.dts
	@@ -2,8 +2,11 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "V11ST-FE", "ralink,rt2880-soc";
	+ compatible = "ralink,v11st-fe", "ralink,rt2880-soc";
	model = "Ralink V11ST-FE";

	pci@440000 {
	@@ -55,8 +58,8 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -65,7 +68,7 @@

	status {
	label = "v11st-fe:green:status";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/V22RW-2X2.dts
	===================================================================
	--- sys/gnu/dts/mips/V22RW-2X2.dts
	+++ sys/gnu/dts/mips/V22RW-2X2.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "V22RW-2X2", "ralink,rt3052-soc";
	+ compatible = "ralink,v22rw-2x2", "ralink,rt3052-soc";
	model = "Ralink AP-RT3052-V22RW-2X2";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	security {
	label = "v22rw-2x2:green:security";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "v22rw-2x2:red:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/VAR11N-300.dts
	===================================================================
	--- sys/gnu/dts/mips/VAR11N-300.dts
	+++ sys/gnu/dts/mips/VAR11N-300.dts
	@@ -2,9 +2,21 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "wt3020", "ralink,mt7620n-soc";
	- model = "Nexx WT3020";
	+ compatible = "vonets,var11n-300", "ralink,mt7620n-soc";
	+ model = "Vonets VAR11N-300";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ system {
	+ label = "var11n-300:blue:system";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	+ };
	+ };

	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	@@ -14,26 +26,13 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "wt3020:blue:power";
	- gpios = <&gpio3 0 0>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&gpio2 {
	- status = "okay";
	-};
	-
	-&gpio3 {
	+&gpio0 {
	status = "okay";
	};

	@@ -45,7 +44,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -73,17 +71,9 @@
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	+ mediatek,portmap = "llllw";
	};

	&wmac {
	@@ -93,7 +83,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	+ ralink,group = "i2c";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/VOCORE-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/VOCORE-16M.dts
	+++ sys/gnu/dts/mips/VOCORE-16M.dts
	@@ -2,6 +2,11 @@

	#include "VOCORE.dtsi"

	+/ {
	+ compatible = "vocore,vocore-16m", "vocore,vocore", "ralink,rt5350-soc";
	+ model = "VoCore (16M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/VOCORE-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/VOCORE-8M.dts
	+++ sys/gnu/dts/mips/VOCORE-8M.dts
	@@ -2,6 +2,11 @@

	#include "VOCORE.dtsi"

	+/ {
	+ compatible = "vocore,vocore-8m", "vocore,vocore", "ralink,rt5350-soc";
	+ model = "VoCore (8M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/VOCORE.dtsi
	===================================================================
	--- sys/gnu/dts/mips/VOCORE.dtsi
	+++ sys/gnu/dts/mips/VOCORE.dtsi
	@@ -1,8 +1,9 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "VoCore", "ralink,rt5350-soc";
	- model = "VoCore";
	+ compatible = "vocore,vocore", "ralink,rt5350-soc";

	gpio-export {
	compatible = "gpio-export";
	@@ -11,7 +12,7 @@
	gpio0 {
	gpio-export,name = "gpio0";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 0 0>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};

	/* UARTF */
	@@ -19,42 +20,42 @@
	/* UARTF_RTS_N */
	gpio-export,name = "gpio7";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 7 0>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	};

	gpio8 {
	/* UARTF_TXD */
	gpio-export,name = "gpio8";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 8 0>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	};

	gpio9 {
	/* UARTF_CTS_N */
	gpio-export,name = "gpio9";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 9 0>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};

	gpio12 {
	/* UARTF_DCD_N */
	gpio-export,name = "gpio12";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};

	gpio13 {
	/* UARTF_DSR_N */
	gpio-export,name = "gpio13";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};

	gpio14 {
	/* UARTF_RIN */
	gpio-export,name = "gpio14";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 14 0>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	};

	/* JTAG */
	@@ -62,35 +63,35 @@
	/* JTAG_TDO */
	gpio-export,name = "gpio17";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 17 0>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
	};

	gpio18 {
	/* JTAG_TDI */
	gpio-export,name = "gpio18";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 18 0>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
	};

	gpio19 {
	/* JTAG_TMS */
	gpio-export,name = "gpio19";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 19 0>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
	};

	gpio20 {
	/* JTAG_TCLK */
	gpio-export,name = "gpio20";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 20 0>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
	};

	gpio21 {
	/* JTAG_TRST_N */
	gpio-export,name = "gpio21";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio0 21 0>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
	};

	/* ETH LEDs */
	@@ -98,35 +99,35 @@
	/* ETH0_LED */
	gpio-export,name = "gpio22";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 0 0>;
	+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
	};

	gpio23 {
	/* ETH1_LED */
	gpio-export,name = "gpio23";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 1 0>;
	+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
	};

	gpio24 {
	/* ETH2_LED */
	gpio-export,name = "gpio24";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 2 0>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	};

	gpio25 {
	/* ETH3_LED */
	gpio-export,name = "gpio25";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 3 0>;
	+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
	};

	gpio26 {
	/* ETH4_LED */
	gpio-export,name = "gpio26";
	gpio-export,direction_may_change = <1>;
	- gpios = <&gpio1 4 0>;
	+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -136,13 +137,13 @@
	status {
	/* UARTF_RXD */
	label = "vocore:green:status";
	- gpios = <&gpio0 10 0>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	};

	eth {
	/* UARTF_DTR_N */
	label = "vocore:orange:eth";
	- gpios = <&gpio0 11 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	Index: sys/gnu/dts/mips/VOCORE2.dts
	===================================================================
	--- sys/gnu/dts/mips/VOCORE2.dts
	+++ sys/gnu/dts/mips/VOCORE2.dts
	@@ -1,6 +1,22 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "VOCORE2.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
	+ model = "VoCore2";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "vocore2:fuchsia:status";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};

	&spi0 {
	status = "okay";
	@@ -10,8 +26,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -33,7 +49,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x3b0000>;
	+ reg = <0x50000 0xfb0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/VOCORE2.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/VOCORE2.dtsi
	@@ -0,0 +1,53 @@
	+#include "mt7628an.dtsi"
	+
	+/ {
	+ compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS2,115200";
	+ };
	+};
	+
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wled_an", "refclk", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,mtd-eeprom = <&factory 0x4>;
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x7>;
	+ mediatek,portdisable = <0x3a>;
	+};
	+
	+&i2s {
	+ status = "okay";
	+};
	+
	+&gdma {
	+ status = "okay";
	+};
	+
	+&pwm {
	+ status = "okay";
	+};
	+
	+&uart1 {
	+ status = "okay";
	+};
	+
	+&uart2 {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/VOCORE2LITE.dts
	===================================================================
	--- sys/gnu/dts/mips/VOCORE2LITE.dts
	+++ sys/gnu/dts/mips/VOCORE2LITE.dts
	@@ -1,6 +1,22 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "VOCORE2.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "vocore,vocore2lite", "vocore,vocore2", "mediatek,mt7628an-soc";
	+ model = "VoCore2-Lite";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ status {
	+ label = "vocore2lite:green:status";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};

	&spi0 {
	status = "okay";
	@@ -10,8 +26,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	Index: sys/gnu/dts/mips/VR500.dts
	===================================================================
	--- sys/gnu/dts/mips/VR500.dts
	+++ sys/gnu/dts/mips/VR500.dts
	@@ -1,17 +1,29 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "X8", "ralink,rt5350-soc";
	- model = "Poray X8";
	+ compatible = "planex,vr500", "mediatek,mt7621-soc";
	+ model = "Planex VR500";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };

	gpio-leds {
	compatible = "gpio-leds";

	power {
	- label = "x8:green:power";
	- gpios = <&gpio0 13 1>;
	+ label = "vr500:green:power";
	+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +35,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,8 +49,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -60,7 +72,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0x3fb0000>;
	};
	};
	};
	@@ -68,30 +80,8 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
	ralink,function = "gpio";
	};
	};
	};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	Index: sys/gnu/dts/mips/W06.dts
	===================================================================
	--- sys/gnu/dts/mips/W06.dts
	+++ sys/gnu/dts/mips/W06.dts
	@@ -1,22 +1,35 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "HT-TM02", "ralink,rt5350-soc";
	- model = "HooToo HT-TM02";
	+ compatible = "tama,w06", "mediatek,mt7628an-soc";
	+ model = "Tama W06";
	+
	+ memory@0{
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };

	gpio-leds {
	compatible = "gpio-leds";

	- wlan {
	- label = "ht-tm02:blue:wlan";
	- gpios = <&gpio0 7 1>;
	+ wps {
	+ label = "w06:green:wps";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	- lan {
	- label = "ht-tm02:green:lan";
	- gpios = <&gpio0 12 1>;
	+ wan {
	+ label = "w06:green:wan";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless {
	+ label = "w06:green:wlan";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,23 +41,33 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- modeswitch {
	- label = "modeswitch";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&gpio0 {
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&ohci {
	status = "okay";
	};

	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart1", "p0led_an", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	&spi0 {
	status = "okay";

	@@ -53,8 +76,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -76,37 +99,17 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0xeb0000>;
	};
	- };
	-};

	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	- ralink,function = "gpio";
	+ partition@f00000 {
	+ label = "user-data";
	+ reg = <0xf00000 0x100000>;
	+ read-only;
	};
	};
	};

	-&ethernet {
	- mtd-mac-address = <&factory 0x28>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x10>;
	- mediatek,portdisable = <0x2f>;
	-};
	-
	&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	status = "okay";
	};
	Index: sys/gnu/dts/mips/W150M.dts
	===================================================================
	--- sys/gnu/dts/mips/W150M.dts
	+++ sys/gnu/dts/mips/W150M.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "W150M", "ralink,rt3050-soc";
	+ compatible = "tenda,w150m", "ralink,rt3050-soc";
	model = "Tenda W150M";

	cfi@1f000000 {
	@@ -43,32 +46,32 @@

	3grouter {
	label = "w150m:blue:3grouter";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	ap {
	label = "w150m:blue:ap";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wisprouter {
	label = "w150m:blue:wisprouter";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wirelessrouter {
	label = "w150m:blue:wirelessrouter";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "w150m:blue:3g";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wpsreset {
	label = "w150m:blue:wpsreset";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -80,14 +83,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};
	};
	Index: sys/gnu/dts/mips/W2914NSV2.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/W2914NSV2.dts
	@@ -0,0 +1,26 @@
	+/dts-v1/;
	+
	+#include "W2914NSV2.dtsi"
	+
	+/ {
	+ model = "WeVO W2914NS v2";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ // Only USB LED is connected to GPIO.
	+ // All of other LEDs are connected directly to
	+ // switch, WiFi chip, Vcc, so they are not controllable
	+ // via GPIO
	+
	+ usb {
	+ label = "w2914nsv2:green:usb";
	+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/W2914NSV2.dtsi
	===================================================================
	--- sys/gnu/dts/mips/W2914NSV2.dtsi
	+++ sys/gnu/dts/mips/W2914NSV2.dtsi
	@@ -1,50 +1,36 @@
	-/dts-v1/;
	-
	#include "mt7621.dtsi"

	-/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Firefly FireWRT";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	- };
	+/ {
	+ compatible = "wevo,w2914ns-v2", "mediatek,mt7621-soc";

	chosen {
	bootargs = "console=ttyS0,57600";
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	- };
	- };
	-
	gpio-keys-polled {
	compatible = "gpio-keys-polled";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	- power {
	- label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};

	-&sdhci {
	+&xhci {
	status = "okay";
	};

	@@ -56,8 +42,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -88,20 +74,19 @@
	status = "okay";

	pcie0 {
	- mt76@0,0 {
	+ wifi@14c3,7603 {
	+ compatible = "pci14c3,7603";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	};
	};

	pcie1 {
	- mt76@1,0 {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -113,7 +98,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2";
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/W306R_V20.dts
	===================================================================
	--- sys/gnu/dts/mips/W306R_V20.dts
	+++ sys/gnu/dts/mips/W306R_V20.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "W306R_V20", "ralink,rt3052-soc";
	+ compatible = "tenda,w306r-v2", "ralink,rt3052-soc";
	model = "Tenda W306R V2.0";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	sys {
	label = "w306r-v20:green:sys";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "w306r-v20:green:wps";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	reset {
	label = "RESET/WPS";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/W502U.dts
	===================================================================
	--- sys/gnu/dts/mips/W502U.dts
	+++ sys/gnu/dts/mips/W502U.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "W502U", "ralink,rt3052-soc";
	+ compatible = "alfanetworks,w502u", "ralink,rt3052-soc";
	model = "ALFA Networks W502U";

	chosen {
	@@ -47,12 +50,12 @@

	usb {
	label = "w502u:blue:usb";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "w502u:blue:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -64,14 +67,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WCR-1166DS.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WCR-1166DS.dts
	@@ -0,0 +1,172 @@
	+/dts-v1/;
	+
	+#include "mt7628an.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
	+ model = "Buffalo WCR-1166DS";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ aoss {
	+ label = "aoss";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ ap {
	+ label = "ap";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	+ };
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ router_o {
	+ label = "wcr-1166ds:orange:router";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router_g {
	+ label = "wcr-1166ds:green:router";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet_o {
	+ label = "wcr-1166ds:orange:internet";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ internet_g {
	+ label = "wcr-1166ds:green:internet";
	+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless_o {
	+ label = "wcr-1166ds:orange:wireless";
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wireless_g {
	+ label = "wcr-1166ds:green:wireless";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ diag {
	+ label = "wcr-1166ds:orange:diag";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "wcr-1166ds:green:power";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+};
	+
	+&ehci {
	+ status = "disabled";
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+ mediatek,portdisable = <0x27>;
	+};
	+
	+&ohci {
	+ status = "disabled";
	+};
	+
	+&pcie {
	+ status = "okay";
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x7c0000>;
	+ };
	+
	+ partition@810000 {
	+ label = "firmware2";
	+ reg = <0x810000 0x7c0000>;
	+ };
	+
	+ partition@fd0000 {
	+ label = "glbcfg";
	+ reg = <0xfd0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@fe0000 {
	+ label = "board_data";
	+ reg = <0xfe0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/WCR150GN.dts
	===================================================================
	--- sys/gnu/dts/mips/WCR150GN.dts
	+++ sys/gnu/dts/mips/WCR150GN.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WCR150GN", "ralink,rt3050-soc";
	+ compatible = "sparklan,wcr150gn", "ralink,rt3050-soc";
	model = "Sparklan WCR-150GN";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	user {
	label = "wcr-150gn:amber:user";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wcr-150gn:amber:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +63,14 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WD03.dts
	===================================================================
	--- sys/gnu/dts/mips/WD03.dts
	+++ sys/gnu/dts/mips/WD03.dts
	@@ -1,10 +1,13 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "cf-wr800n", "ralink,mt7620n-soc";
	- model = "Comfast CF-WR800N";
	+ compatible = "ravpower,wd03", "ralink,mt7620a-soc";
	+ model = "Ravpower WD03";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -13,19 +16,15 @@
	gpio-leds {
	compatible = "gpio-leds";

	- ethernet {
	- label = "cf-wr800n:white:ethernet";
	- gpios = <&gpio2 4 1>;
	+ green-wifi {
	+ label = "wd03:green:wifi";
	+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
	};

	- wifi {
	- label = "cf-wr800n:white:wifi";
	- gpios = <&gpio3 0 1>;
	- };

	- wps {
	- label = "cf-wr800n:white:wps";
	- gpios = <&gpio1 15 1>;
	+ blue-wifi {
	+ label = "wd03:blue:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -37,20 +36,12 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&gpio0 {
	- status = "okay";
	-};
	-
	-&gpio1 {
	- status = "okay";
	-};
	-
	&gpio2 {
	status = "okay";
	};
	@@ -67,7 +58,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -95,8 +85,17 @@
	};
	};

	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	+ mtd-mac-address = <&factory 0x4000>;
	+ ralink,port-map = "wllll";
	};

	&wmac {
	@@ -105,8 +104,8 @@

	&pinctrl {
	state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "spi refclk", "i2c";
	+ gpio {
	+ ralink,group = "wled", "ephy";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/WE1026-5G-16M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WE1026-5G-16M.dts
	@@ -0,0 +1,76 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+/dts-v1/;
	+
	+#include "WE1026-5G.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,we1026-5g-16m", "ralink,mt7620a-soc";
	+ model = "ZBT WE1026-5G (16M)";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ en25q128@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ firmware: partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/WE1026-5G.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WE1026-5G.dtsi
	@@ -0,0 +1,124 @@
	+/*
	+ * BSD LICENSE
	+ *
	+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
	+ * All rights reserved.
	+ *
	+ * Redistribution and use in source and binary forms, with or without
	+ * modification, are permitted provided that the following conditions
	+ * are met:
	+ *
	+ * * Redistributions of source code must retain the above copyright
	+ * notice, this list of conditions and the following disclaimer.
	+ * * Redistributions in binary form must reproduce the above copyright
	+ * notice, this list of conditions and the following disclaimer in
	+ * the documentation and/or other materials provided with the
	+ * distribution.
	+ * * Neither the name of Broadcom Corporation nor the names of its
	+ * contributors may be used to endorse or promote products derived
	+ * from this software without specific prior written permission.
	+ *
	+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	+ */
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "zbtlink,we1026-5g", "ralink,mt7620a-soc";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+ lan {
	+ label = "we1026-5g:green:lan";
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "we1026-5g:green:usb";
	+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wifi {
	+ label = "we1026-5g:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&sdhci {
	+ status = "okay";
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x28>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "spi refclk", "ephy", "wled";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+ pcie-bridge {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	+ reg = <0x0000 0 0 0 0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/WF-2881.dts
	===================================================================
	--- sys/gnu/dts/mips/WF-2881.dts
	+++ sys/gnu/dts/mips/WF-2881.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "netis,wf-2881", "mediatek,mt7621-soc";
	model = "NETIS WF-2881";

	memory@0 {
	@@ -15,50 +18,17 @@
	bootargs = "console=ttyS0,57600";
	};

	- nand@1e003000 {
	- status = "okay";
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x1000>;
	- read-only;
	- };
	-
	- partition@80000 {
	- label = "config";
	- reg = <0x80000 0x80000>;
	- read-only;
	- };
	-
	- factory: partition@100000 {
	- label = "factory";
	- reg = <0x100000 0x40000>;
	- read-only;
	- };
	-
	- partition@140000 {
	- label = "firmware";
	- reg = <0x140000 0x7E40000>;
	- };
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	usb {
	label = "wf-2881:green:usb";
	- gpios = <&gpio0 6 1>;
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "wf-2881:green:wps";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -70,14 +40,43 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&spi0 {
	- status="disabled";
	+&nand {
	+ status = "okay";
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x1000>;
	+ read-only;
	+ };
	+
	+ partition@80000 {
	+ label = "config";
	+ reg = <0x80000 0x80000>;
	+ read-only;
	+ };
	+
	+ factory: partition@100000 {
	+ label = "factory";
	+ reg = <0x100000 0x40000>;
	+ read-only;
	+ };
	+
	+ partition@140000 {
	+ label = "firmware";
	+ reg = <0x140000 0x7E40000>;
	+ };
	};

	&pcie {
	@@ -88,7 +87,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -97,7 +96,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WHR-1166D.dts
	===================================================================
	--- sys/gnu/dts/mips/WHR-1166D.dts
	+++ sys/gnu/dts/mips/WHR-1166D.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc";
	model = "Buffalo WHR-1166D";

	gpio-leds {
	@@ -11,37 +14,37 @@

	power {
	label = "whr-1166d:red:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "whr-1166d:green:wifi";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "whr-1166d:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "whr-1166d:orange:wifi";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "whr-1166d:green:internet";
	- gpios = <&gpio2 17 1>;
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "whr-1166d:orange:router";
	- gpios = <&gpio2 18 1>;
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	};

	router2 {
	label = "whr-1166d:green:router";
	- gpios = <&gpio2 19 1>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,28 +56,28 @@

	reset {
	label = "reset";
	- gpios = <&gpio2 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio2 13 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio2 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	bridge {
	label = "bridge";
	- gpios = <&gpio2 15 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -91,7 +94,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -143,7 +145,7 @@

	phy5: ethernet-phy@5 {
	reg = <5>;
	- phy-mode = "rgmii";
	+ phy-mode = "rgmii-rxid";
	};
	};
	};
	@@ -160,11 +162,11 @@
	status = "okay";

	pcie-bridge {
	- mt76@0,0 {
	+ wifi@0,0 {
	+ compatible = "pci0,0";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 32768>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WHR-300HP2.dts
	===================================================================
	--- sys/gnu/dts/mips/WHR-300HP2.dts
	+++ sys/gnu/dts/mips/WHR-300HP2.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
	model = "Buffalo WHR-300HP2";

	gpio-leds {
	@@ -11,37 +14,37 @@

	power {
	label = "whr-300hp2:red:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "whr-300hp2:green:wifi";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "whr-300hp2:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "whr-300hp2:orange:wifi";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "whr-300hp2:green:internet";
	- gpios = <&gpio2 17 1>;
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "whr-300hp2:green:router";
	- gpios = <&gpio2 18 1>;
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	};

	router2 {
	label = "whr-300hp2:orange:router";
	- gpios = <&gpio2 19 1>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,28 +56,28 @@

	reset {
	label = "reset";
	- gpios = <&gpio2 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio2 13 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio2 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	bridge {
	label = "bridge";
	- gpios = <&gpio2 15 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -91,7 +94,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -125,11 +127,6 @@
	ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};

	@@ -145,4 +142,6 @@

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};
	Index: sys/gnu/dts/mips/WHR-600D.dts
	===================================================================
	--- sys/gnu/dts/mips/WHR-600D.dts
	+++ sys/gnu/dts/mips/WHR-600D.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7620a-soc";
	+ compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
	model = "Buffalo WHR-600D";

	gpio-leds {
	@@ -11,37 +14,37 @@

	power {
	label = "whr-600d:red:power";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "whr-600d:green:wifi";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "whr-600d:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wifi2 {
	label = "whr-600d:orange:wifi";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "whr-600d:green:internet";
	- gpios = <&gpio2 17 1>;
	+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "whr-600d:green:router";
	- gpios = <&gpio2 18 1>;
	+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
	};

	router2 {
	label = "whr-600d:orange:router";
	- gpios = <&gpio2 19 1>;
	+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -53,28 +56,28 @@

	reset {
	label = "reset";
	- gpios = <&gpio2 12 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio2 13 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio2 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	bridge {
	label = "bridge";
	- gpios = <&gpio2 15 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};
	};
	@@ -91,7 +94,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l6405d";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -145,4 +147,12 @@

	&pcie {
	status = "okay";
	+
	+ pcie-bridge {
	+ wifi@1814,5592 {
	+ compatible = "pci1814,5592";
	+ reg = <0x0000 0 0 0 0>;
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	+ };
	+ };
	};
	Index: sys/gnu/dts/mips/WHR-G300N.dts
	===================================================================
	--- sys/gnu/dts/mips/WHR-G300N.dts
	+++ sys/gnu/dts/mips/WHR-G300N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WHR-G300N", "ralink,rt3052-soc";
	+ compatible = "buffalo,whr-g300n", "ralink,rt3052-soc";
	model = "Buffalo WHR-G300N";

	cfi@1f000000 {
	@@ -13,6 +16,35 @@
	device-width = <2>;
	#address-cells = <1>;
	#size-cells = <1>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x3a0000>;
	+ };
	+
	+ partition@3f0000 {
	+ label = "user";
	+ reg = <0x3f0000 0x10000>;
	+ read-only;
	+ };
	};

	gpio-leds {
	@@ -20,17 +52,17 @@

	diag {
	label = "whr-g300n:red:diag";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	router {
	label = "whr-g300n:green:router";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	security {
	label = "whr-g300n:amber:security";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -42,26 +74,26 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	router-off {
	label = "router-off";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x102>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_2>;
	};

	router-on {
	label = "router-on";
	- gpios = <&gpio0 8 1>;
	- linux,code = <0x103>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_3>;
	};
	};
	};
	@@ -75,12 +107,14 @@
	};
	};

	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+};
	+
	&esw {
	mediatek,portmap = <0x2f>;
	};

	-/* FIXME: no partitions defined */
	-/*&wmac {
	+&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	-*/
	Index: sys/gnu/dts/mips/WIDORA-NEO-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/WIDORA-NEO-16M.dts
	+++ sys/gnu/dts/mips/WIDORA-NEO-16M.dts
	@@ -1,17 +1,25 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "WIDORA-NEO.dtsi"
	+
	+/ {
	+ compatible = "widora,neo-16m", "widora,neo", "mediatek,mt7628an-soc";
	+ model = "Widora-NEO (16M)";
	+};

	&spi0 {
	status = "okay";

	+ pinctrl-names = "default";
	+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
	+
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	+ spi-max-frequency = <40000000>;
	+ m25p,chunked-io = <31>;

	partition@0 {
	label = "u-boot";
	@@ -22,7 +30,6 @@
	partition@30000 {
	label = "u-boot-env";
	reg = <0x30000 0x10000>;
	- read-only;
	};

	factory: partition@40000 {
	@@ -33,7 +40,15 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0x0fb0000>;
	};
	};
	+
	+ spidev@1 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "linux,spidev";
	+ reg = <1>;
	+ spi-max-frequency = <40000000>;
	+ };
	};
	Index: sys/gnu/dts/mips/WIDORA-NEO-32M.dts
	===================================================================
	--- sys/gnu/dts/mips/WIDORA-NEO-32M.dts
	+++ sys/gnu/dts/mips/WIDORA-NEO-32M.dts
	@@ -1,17 +1,25 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "WIDORA-NEO.dtsi"
	+
	+/ {
	+ compatible = "widora,neo-32m", "widora,neo", "mediatek,mt7628an-soc";
	+ model = "Widora-NEO (32M)";
	+};

	&spi0 {
	status = "okay";

	+ pinctrl-names = "default";
	+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
	+
	m25p80@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	+ spi-max-frequency = <40000000>;
	+ m25p,chunked-io = <31>;

	partition@0 {
	label = "u-boot";
	@@ -22,7 +30,6 @@
	partition@30000 {
	label = "u-boot-env";
	reg = <0x30000 0x10000>;
	- read-only;
	};

	factory: partition@40000 {
	@@ -33,7 +40,15 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x3b0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	+
	+ spidev@1 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "linux,spidev";
	+ reg = <1>;
	+ spi-max-frequency = <40000000>;
	+ };
	};
	Index: sys/gnu/dts/mips/WIDORA-NEO.dtsi
	===================================================================
	--- sys/gnu/dts/mips/WIDORA-NEO.dtsi
	+++ sys/gnu/dts/mips/WIDORA-NEO.dtsi
	@@ -1,17 +1,13 @@
	-/dts-v1/;
	-
	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
	- model = "MediaTek LinkIt Smart 7688";
	+ compatible = "widora,neo", "mediatek,mt7628an-soc";

	chosen {
	- bootargs = "console=ttyS2,57600";
	- };
	-
	- aliases {
	- serial0 = &uart2;
	+ bootargs = "console=ttyS0,115200";
	};

	memory@0 {
	@@ -19,18 +15,12 @@
	reg = <0x0 0x8000000>;
	};

	- bootstrap {
	- compatible = "mediatek,linkit";
	-
	- status = "okay";
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	wifi {
	- label = "mediatek:orange:wifi";
	- gpios = <&wgpio 0 0>;
	+ label = "widora:orange:wifi";
	+ gpios = <&wgpio 0 GPIO_ACTIVE_HIGH>;
	default-state = "on";
	};
	};
	@@ -43,8 +33,8 @@

	wps {
	label = "reset";
	- gpios = <&gpio1 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -101,57 +91,6 @@
	};
	};

	-&wmac {
	- status = "okay";
	-};
	-
	-&spi0 {
	- status = "okay";
	-
	- pinctrl-names = "default";
	- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
	-
	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "jedec,spi-nor";
	- reg = <0>;
	- linux,modalias = "m25p80", "mx25l25635e";
	- spi-max-frequency = <40000000>;
	- m25p,chunked-io = <31>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0x1fb0000>;
	- };
	- };
	-
	- spidev@1 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "linux,spidev";
	- reg = <1>;
	- spi-max-frequency = <40000000>;
	- };
	-};
	-
	&i2c {
	status = "okay";
	};
	@@ -174,7 +113,7 @@

	&sdhci {
	status = "okay";
	- mediatek,cd-high;
	+ mediatek,cd-low;
	};

	&wmac {
	Index: sys/gnu/dts/mips/WITI-256M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WITI-256M.dts
	@@ -0,0 +1,13 @@
	+/dts-v1/;
	+
	+#include "WITI.dtsi"
	+
	+/ {
	+ compatible = "mqmaker,witi-256m", "mqmaker,witi", "mediatek,mt7621-soc";
	+ model = "MQmaker WiTi (256MB RAM)";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x10000000>;
	+ };
	+};
	Index: sys/gnu/dts/mips/WITI-512M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WITI-512M.dts
	@@ -0,0 +1,13 @@
	+/dts-v1/;
	+
	+#include "WITI.dtsi"
	+
	+/ {
	+ compatible = "mqmaker,witi-512m", "mqmaker,witi", "mediatek,mt7621-soc";
	+ model = "MQmaker WiTi (512MB RAM)";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ };
	+};
	Index: sys/gnu/dts/mips/WITI.dtsi
	===================================================================
	--- sys/gnu/dts/mips/WITI.dtsi
	+++ sys/gnu/dts/mips/WITI.dtsi
	@@ -2,14 +2,11 @@

	#include "mt7621.dtsi"

	-/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "MQmaker WiTi";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x10000000>;
	- };
	+/ {
	+ compatible = "mqmaker,witi", "mediatek,mt7621-soc";

	chosen {
	bootargs = "console=ttyS0,57600";
	@@ -17,12 +14,6 @@

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";

	pcf8563: rtc@51 {
	@@ -41,21 +32,16 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-
	&sdhci {
	status = "okay";
	};

	-&xhci {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -64,8 +50,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -99,7 +85,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	mtd-mac-address = <&factory 0xe000>;
	};
	};
	@@ -109,7 +95,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	mtd-mac-address = <&factory 0xe000>;
	};
	};
	Index: sys/gnu/dts/mips/WIZARD8800.dts
	===================================================================
	--- sys/gnu/dts/mips/WIZARD8800.dts
	+++ sys/gnu/dts/mips/WIZARD8800.dts
	@@ -3,7 +3,7 @@
	#include "rt5350.dtsi"

	/ {
	- compatible = "WIZARD8800", "ralink,rt5350-soc";
	+ compatible = "easyacc,wizard8800", "ralink,rt5350-soc";
	model = "EASYACC WI-STOR WIZARD 8800";
	};

	@@ -23,7 +23,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WIZFI630A.dts
	===================================================================
	--- sys/gnu/dts/mips/WIZFI630A.dts
	+++ sys/gnu/dts/mips/WIZFI630A.dts
	@@ -2,40 +2,38 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "wizfi630a", "ralink,rt5350-soc";
	+ compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
	model = "WIZnet WizFi630A";

	chosen {
	bootargs = "console=ttyS1,115200";
	};

	- gpio-export {
	- compatible = "gpio-export";
	- #size-cells = <0>;
	- };
	-
	gpio-leds {
	compatible = "gpio-leds";

	run {
	label = "wizfi630a::run";
	- gpios = <&gpio0 1 1>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	};

	wps {
	label = "wizfi630a::wps";
	- gpios = <&gpio0 20 1>;
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	uart1 {
	label = "wizfi630a::uart1";
	- gpios = <&gpio0 18 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};

	uart2 {
	label = "wizfi630a::uart2";
	- gpios = <&gpio0 21 1>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -47,26 +45,26 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 17 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	scm1 {
	label = "SCM1";
	- gpios = <&gpio0 19 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	scm2 {
	label = "SCM2";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -83,7 +81,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -116,28 +113,9 @@
	};

	&uart {
	- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	- reg = <0x500 0x100>;
	- resets = <&rstctrl 12>;
	- reset-names = "uart";
	- interrupt-parent = <&intc>;
	- interrupts = <5>;
	- reg-shift = <2>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&uartf_pins>;
	status = "okay";
	-};
	-
	-&uartlite {
	- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
	- reg = <0xc00 0x100>;
	- resets = <&rstctrl 19>;
	- reset-names = "uartl";
	- interrupt-parent = <&intc>;
	- interrupts = <12>;
	- reg-shift = <2>;
	pinctrl-names = "default";
	- pinctrl-0 = <&uartlite_pins>;
	+ pinctrl-0 = <&uartf_pins>;
	};

	&pinctrl {
	@@ -147,20 +125,6 @@
	ralink,function = "gpio";
	};
	};
	-
	- uartf_gpio_pins: uartf_gpio {
	- uartf_gpio {
	- ralink,group = "uartf";
	- ralink,function = "uartf";
	- };
	- };
	-
	- uartlite_pins: uartlite {
	- uart {
	- ralink,group = "uartlite";
	- ralink,function = "uartlite";
	- };
	- };
	};

	&ethernet {
	Index: sys/gnu/dts/mips/WL-330N.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-330N.dts
	+++ sys/gnu/dts/mips/WL-330N.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WL-330N", "ralink,rt3050-soc";
	+ compatible = "asus,wl-330n", "ralink,rt3050-soc";
	model = "Asus WL-330N";

	gpio-leds {
	@@ -11,12 +14,12 @@

	link {
	label = "wl-330n:blue:link";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wl-330n:blue:power";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,14 +31,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -48,7 +51,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WL-330N3G.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-330N3G.dts
	+++ sys/gnu/dts/mips/WL-330N3G.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WL-330N3G", "ralink,rt3050-soc";
	+ compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
	model = "Asus WL-330N3G";

	gpio-leds {
	@@ -11,17 +14,17 @@

	3g {
	label = "wl-330n3g:blue:3g";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	3g2 {
	label = "wl-330n3g:red:3g";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wl-330n3g:blue:power";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -53,7 +56,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WL-341V3.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-341V3.dts
	+++ sys/gnu/dts/mips/WL-341V3.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WL-341V3", "ralink,rt3052-soc";
	+ compatible = "sitecom,wl-341-v3", "ralink,rt3052-soc";
	model = "Sitecom WL-341 v3";

	cfi@1f000000 {
	@@ -43,37 +46,37 @@

	first {
	label = "wl-341v3:amber:first";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	first2 {
	label = "wl-341v3:blue:first";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	third {
	label = "wl-341v3:amber:third";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	third2 {
	label = "wl-341v3:blue:third";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	fourth {
	label = "wl-341v3:blue:fourth";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	fifth {
	label = "wl-341v3:amber:fifth";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	fifth2 {
	label = "wl-341v3:blue:fifth";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -85,14 +88,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 5 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WL-351.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-351.dts
	+++ sys/gnu/dts/mips/WL-351.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WL-351", "ralink,rt3052-soc";
	+ compatible = "sitecom,wl-351", "ralink,rt3052-soc";
	model = "Sitecom WL-351 v1 002";

	cfi@1f000000 {
	@@ -43,17 +46,17 @@

	power {
	label = "wl-351:amber:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	unpopulated {
	label = "wl-351:amber:unpopulated";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	unpopulated2 {
	label = "wl-351:blue:unpopulated";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -65,28 +68,28 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	rtl8366rb {
	- compatible = "rtl8366rb";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ compatible = "realtek,rtl8366rb";
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};
	};

	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
	ralink,function = "gpio";
	};
	};
	@@ -94,9 +97,12 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii_pins>;
	};

	&esw {
	+ ralink,rgmii = <1>;
	mediatek,portmap = <0x3f>;
	ralink,fct2 = <0x0002500c>;
	/*
	Index: sys/gnu/dts/mips/WL-WN575A3.dts
	===================================================================
	--- sys/gnu/dts/mips/WL-WN575A3.dts
	+++ sys/gnu/dts/mips/WL-WN575A3.dts
	@@ -1,50 +1,83 @@
	/dts-v1/;
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>

	-#include "mt7621.dtsi"
	+#include "mt7628an.dtsi"

	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Linksys RE6500";
	+ compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
	+ model = "Wavlink WL-WN575A3";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x4000000>;
	};

	- chosen {
	- bootargs = "console=ttyS0,57600";
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	};

	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "re6500:orange:wifi";
	- gpios = <&gpio0 0 0>;
	+ wifi-high {
	+ label = "wl-wn575a3:green:wifi-high";
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};

	- power {
	- label = "re6500:white:power";
	- gpios = <&gpio0 9 0>;
	+ wifi-med {
	+ label = "wl-wn575a3:green:wifi-med";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	- };

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	+ wifi-low {
	+ label = "wl-wn575a3:green:wifi-low";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	+ };

	wps {
	- label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ label = "wl-wn575a3:green:wps";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	};
	+ };
	+};

	- reset {
	- label = "reset";
	- gpios = <&gpio0 11 0>;
	- linux,code = <0x198>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "wled_an";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+ pcie-bridge {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -57,8 +90,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -85,37 +118,12 @@
	};
	};

	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&pcie {
	+&wmac {
	status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	+ ralink,mtd-eeprom = <&factory 0x4>;
	};

	&ethernet {
	mtd-mac-address = <&factory 0x2e>;
	+ mediatek,portmap = "llllw";
	};
	Index: sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	===================================================================
	--- sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	+++ sys/gnu/dts/mips/WLI-TX4-AG300N.dts
	@@ -2,10 +2,13 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
	+ compatible = "buffalo,wli-tx4-ag300n", "ralink,rt2880-soc";
	model = "Buffalo WLI-TX4-AG300N";

	cfi@1f000000 {
	@@ -35,7 +38,7 @@
	};

	partition@50000 {
	- label = "linux";
	+ label = "firmware";
	reg = <0x50000 0x3b0000>;
	};
	};
	@@ -48,20 +51,20 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	bandwidth {
	label = "bandwidth";
	- gpios = <&gpio0 8 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -70,17 +73,17 @@

	diag {
	label = "wli-tx4-ag300n:red:diag";
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wli-tx4-ag300n:blue:power";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	security {
	label = "wli-tx4-ag300n:blue:security";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -94,7 +97,16 @@
	mtd-mac-address = <&factory 0x4>;

	port@0 {
	- mediatek,fixed-link = <1000 1 1 1>;
	+ mediatek,fixed-link = <100 1 1 1>;
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ phy-mode = "mii";
	+ reg = <0>;
	+ };
	};
	};

	Index: sys/gnu/dts/mips/WLR-6000.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WLR-6000.dts
	@@ -0,0 +1,187 @@
	+/dts-v1/;
	+
	+#include "rt3883.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
	+ model = "Sitecom WLR-6000";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "wlr-6000:red:power";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ ops {
	+ label = "wlr-6000:white:ops";
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usb {
	+ gpio-export,name = "usb";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "jtag", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ mtd-mac-address = <&factory 0x8004>;
	+ mtd-mac-address-increment = <1>;
	+
	+ port@0 {
	+ phy-handle = <&phy0>;
	+ phy-mode = "rgmii";
	+ };
	+
	+ mdio-bus {
	+ status = "okay";
	+
	+ phy0: ethernet-phy@0 {
	+ reg = <0>;
	+ phy-mode = "rgmii";
	+
	+ qca,ar8327-initvals = <
	+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
	+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
	+ 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
	+ 0x50 0xc437c437 /* LED Control Register 0 */
	+ 0x54 0xc337c337 /* LED Control Register 1 */
	+ 0x58 0x00000000 /* LED Control Register 2 */
	+ 0x5c 0x03ffff00 /* LED Control Register 3 */
	+ 0x7c 0x0000007e /* PORT0_STATUS */
	+ 0x94 0x0000007e /* PORT6 STATUS */
	+ >;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <8600000>;
	+ m25p,fast-read;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0x713000>;
	+ };
	+
	+ partition@763000 {
	+ label = "manufacture";
	+ reg = <0x763000 0x7D000>;
	+ read-only;
	+ };
	+
	+ partition@7E0000 {
	+ label = "backup";
	+ reg = <0x7E0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7F0000 {
	+ label = "storage";
	+ reg = <0x7F0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pci {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pci_pins>;
	+
	+ pci_pins: pci {
	+ pci {
	+ ralink,group = "pci";
	+ ralink,function = "pci-fnc";
	+ };
	+ };
	+
	+ host-bridge {
	+ pci-bridge@1 {
	+ status = "okay";
	+
	+ wifi@1814,3091 {
	+ compatible = "pci1814,3091";
	+ reg = <0x10000 0 0 0 0>;
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	+ };
	+ };
	+ };
	+};
	+
	+&wmac {
	+ status = "okay";
	+ ralink,2ghz = <0>;
	+ ralink,mtd-eeprom = <&factory 0x0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/WMDR-143N.dts
	===================================================================
	--- sys/gnu/dts/mips/WMDR-143N.dts
	+++ sys/gnu/dts/mips/WMDR-143N.dts
	@@ -1,10 +1,10 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "rt3883.dtsi"

	/ {
	- compatible = "NCS601W", "ralink,rt5350-soc";
	- model = "Wansview NCS601W";
	+ compatible = "loewe,wmdr-143n", "ralink,rt3883-soc";
	+ model = "Loewe WMDR-143N";
	};

	&spi0 {
	@@ -15,8 +15,7 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	- spi-max-frequency = <10000000>;
	+ spi-max-frequency = <25000000>;

	partition@0 {
	label = "u-boot";
	@@ -26,7 +25,7 @@

	partition@30000 {
	label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	+ reg = <0x30000 0x00010000>;
	read-only;
	};

	@@ -43,31 +42,23 @@
	};
	};

	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	-};
	+ port@0 {
	+ phy-handle = <&phy0>;
	+ phy-mode = "mii";
	+ };
	+ mdio-bus {
	+ status = "okay";

	-&esw {
	- mediatek,portmap = <0x2f>;
	+ phy0: ethernet-phy@0 {
	+ reg = <0>;
	+ phy-mode = "mii";
	+ };
	+ };
	};

	&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	status = "okay";
	+ ralink,mtd-eeprom = <&factory 0>;
	+ mtd-mac-address = <&factory 0x4>;
	};
	Index: sys/gnu/dts/mips/WMR-300.dts
	===================================================================
	--- sys/gnu/dts/mips/WMR-300.dts
	+++ sys/gnu/dts/mips/WMR-300.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
	model = "Buffalo WMR-300";
	@@ -11,17 +14,17 @@

	aoss1 {
	label = "wmr-300:red:aoss";
	- gpios = <&gpio2 1 1>;
	+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	aoss2 {
	label = "wmr-300:green:aoss";
	- gpios = <&gpio2 2 1>;
	+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wmr-300:green:status";
	- gpios = <&gpio2 4 1>;
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -57,7 +60,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WN-GX300GR.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WN-GX300GR.dts
	@@ -0,0 +1,156 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "iodata,wn-gx300gr", "mediatek,mt7621-soc";
	+ model = "I-O DATA WN-GX300GR";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x4000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "wn-gx300gr:green:power";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "wn-gx300gr:green:wps";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ auto {
	+ label = "auto";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	+ };
	+
	+ custom {
	+ label = "custom";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	+ };
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "Bootloader";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "Config";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ Factory: partition@40000 {
	+ label = "Factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "iNIC_rf";
	+ reg = <0x50000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@60000 {
	+ label = "firmware";
	+ reg = <0x60000 0x770000>;
	+ };
	+
	+ partition@7d0000 {
	+ label = "Key";
	+ reg = <0x7d0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7e0000 {
	+ label = "backup";
	+ reg = <0x7e0000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@7f0000 {
	+ label = "storage";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&Factory 0x4>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "uart2", "uart3", "jtag";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ mt76@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&Factory 0x0>;
	+ };
	+ };
	+};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/WN3000RPV3.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WN3000RPV3.dts
	@@ -0,0 +1,143 @@
	+/* This file is released into the public domain */
	+
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>
	+
	+/ {
	+ compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
	+ model = "Netgear WN3000RPv3";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power_g {
	+ label = "wn3000rpv3:green:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ default-state = "on";
	+ };
	+
	+ power_r {
	+ label = "wn3000rpv3:red:power";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ client_g {
	+ label = "wn3000rpv3:green:client";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ client_r {
	+ label = "wn3000rpv3:red:client";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router_g {
	+ label = "wn3000rpv3:green:router";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ router_r {
	+ label = "wn3000rpv3:red:router";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "wn3000rpv3:green:wps";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ l_arrow {
	+ label = "wn3000rpv3:blue:leftarrow";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ r_arrow {
	+ label = "wn3000rpv3:blue:rightarrow";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+};
	+
	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@40000 {
	+ label = "firmware";
	+ reg = <0x40000 0x7b0000>;
	+ };
	+
	+ art: partition@7f0000 {
	+ label = "art";
	+ reg = <0x7f0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&art 0x0>;
	+};
	+
	+&wmac {
	+ mtd-mac-address = <&art 0x6>;
	+ ralink,mtd-eeprom = <&art 0x1000>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "i2c", "uartf", "spi refclk";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/WNCE2001.dts
	===================================================================
	--- sys/gnu/dts/mips/WNCE2001.dts
	+++ sys/gnu/dts/mips/WNCE2001.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WNCE2001", "ralink,rt3052-soc";
	+ compatible = "netgear,wnce2001", "ralink,rt3052-soc";
	model = "Netgear WNCE2001";

	chosen {
	@@ -15,22 +18,22 @@

	power-green {
	label = "wnce2001:green:power";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	power-red {
	label = "wnce2001:red:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan-green {
	label = "wnce2001:green:wlan";
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	};

	wlan-red {
	label = "wnce2001:red:wlan";
	- gpios = <&gpio0 13 0>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -42,26 +45,26 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	rt {
	label = "rt";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x101>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_1>;
	};
	};
	};
	@@ -74,7 +77,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l3205d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WNDR3700V5.dts
	===================================================================
	--- sys/gnu/dts/mips/WNDR3700V5.dts
	+++ sys/gnu/dts/mips/WNDR3700V5.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
	+ compatible = "netgear,wndr3700-v5", "mediatek,mt7621-soc";
	model = "Netgear WNDR3700v5";

	memory@0 {
	@@ -20,12 +23,12 @@

	wps {
	label = "wndr3700v5:green:wps";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wndr3700v5:green:power";
	- gpios = <&gpio0 18 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,20 +40,20 @@

	wps {
	label = "wndr3700v5:wps";
	- gpios = <&gpio0 7 0>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	wifi {
	label = "wndr3700v5:wifi";
	- gpios = <&gpio0 8 0>;
	- linux,code = <0xf7>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	};

	reset {
	label = "wndr3700v5:reset";
	- gpios = <&gpio0 14 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -61,7 +64,7 @@
	usbpower {
	gpio-export,name = "usbpower";
	gpio-export,output = <1>;
	- gpios = <&gpio0 10 1>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	};
	};
	};
	@@ -69,17 +72,18 @@
	&spi0 {
	status = "okay";

	- m25p80@0 {
	+ mx25l12805d@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "mx25l12805d";
	+ compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	reg = <0x0 0x30000>;
	+ read-only;
	};

	partition@30000 {
	@@ -96,7 +100,7 @@

	partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	+ reg = <0x50000 0xee0000>;
	};
	};
	};
	@@ -108,17 +112,16 @@
	mt76@0,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0004>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	- pcie2 {
	- mt76@2,0 {
	- reg = <0x1000 0 0 0 0>;
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8004>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WR1200JS.dts
	===================================================================
	--- sys/gnu/dts/mips/WR1200JS.dts
	+++ sys/gnu/dts/mips/WR1200JS.dts
	@@ -2,28 +2,38 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG2626";
	+ compatible = "youhua,wr1200js", "mediatek,mt7621-soc";
	+ model = "YouHua WR1200JS";

	memory@0 {
	device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	+ reg = <0x0 0x8000000>;
	};

	chosen {
	bootargs = "console=ttyS0,115200";
	};

	- palmbus: palmbus@1E000000 {
	- i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	- status = "okay";
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ internet {
	+ label = "wr1200js:blue:internet";
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "wr1200js:blue:wps";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "wr1200js:blue:usb";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -35,25 +45,24 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	- };

	- gpio-leds {
	- compatible = "gpio-leds";
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };

	- status {
	- label = "zbt-wg2626:green:status";
	- gpios = <&gpio0 24 1>;
	+ wifi {
	+ label = "wifi";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RFKILL>;
	};
	};
	};

	-&sdhci {
	- status = "okay";
	-};
	-
	&spi0 {
	status = "okay";

	@@ -62,8 +71,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -97,8 +106,7 @@
	mt76@0,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	};
	};

	@@ -106,8 +114,13 @@
	mt76@1,0 {
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+
	+ led {
	+ led-sources = <2>;
	+ led-active-low;
	+ };
	};
	};
	};
	@@ -119,7 +132,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "i2c", "uart2", "uart3", "wdt";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/WR512-3GN-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/WR512-3GN-4M.dts
	+++ sys/gnu/dts/mips/WR512-3GN-4M.dts
	@@ -1,10 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "WR512-3GN.dtsi"

	/ {
	- compatible = "WR512-3GN", "ralink,rt3052-soc";
	- model = "WR512-3GN-like router";
	+ compatible = "unbranded,wr512-3gn-4m", "unbranded,wr512-3gn", "ralink,rt3052-soc";
	+ model = "WR512-3GN (4M)";

	cfi@1f000000 {
	compatible = "cfi-flash";
	@@ -37,73 +37,4 @@
	reg = <0x50000 0x3c8000>;
	};
	};
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- 3g {
	- label = "wr512-3gn:green:3g";
	- gpios = <&gpio0 9 1>;
	- };
	-
	- gateway {
	- label = "wr512-3gn:green:gateway";
	- gpios = <&gpio0 11 1>;
	- };
	-
	- ap {
	- label = "wr512-3gn:green:ap";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- wps {
	- label = "wr512-3gn:green:wps";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- station {
	- label = "wr512-3gn:green:station";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x32>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&otg {
	- status = "okay";
	};
	Index: sys/gnu/dts/mips/WR512-3GN-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/WR512-3GN-8M.dts
	+++ sys/gnu/dts/mips/WR512-3GN-8M.dts
	@@ -1,10 +1,10 @@
	/dts-v1/;

	-#include "rt3050.dtsi"
	+#include "WR512-3GN.dtsi"

	/ {
	- compatible = "WR512-3GN", "ralink,rt3052-soc";
	- model = "WR512-3GN-like router";
	+ compatible = "unbranded,wr512-3gn-8m", "unbranded,wr512-3gn", "ralink,rt3052-soc";
	+ model = "WR512-3GN (8M)";

	cfi@1f000000 {
	compatible = "cfi-flash";
	@@ -37,73 +37,4 @@
	reg = <0x50000 0x7b0000>;
	};
	};
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- 3g {
	- label = "wr512-3gn:green:3g";
	- gpios = <&gpio0 9 1>;
	- };
	-
	- gateway {
	- label = "wr512-3gn:green:gateway";
	- gpios = <&gpio0 11 1>;
	- };
	-
	- ap {
	- label = "wr512-3gn:green:ap";
	- gpios = <&gpio0 12 1>;
	- };
	-
	- wps {
	- label = "wr512-3gn:green:wps";
	- gpios = <&gpio0 14 1>;
	- };
	-
	- station {
	- label = "wr512-3gn:green:station";
	- gpios = <&gpio0 13 1>;
	- };
	- };
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset_wps {
	- label = "reset_wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	- };
	-
	- mode {
	- label = "mode";
	- gpios = <&gpio0 7 1>;
	- linux,code = <0x32>;
	- };
	- };
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&otg {
	- status = "okay";
	};
	Index: sys/gnu/dts/mips/WR512-3GN.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WR512-3GN.dtsi
	@@ -0,0 +1,77 @@
	+#include "rt3050.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "unbranded,wr512-3gn", "ralink,rt3052-soc";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ 3g {
	+ label = "wr512-3gn:green:3g";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ gateway {
	+ label = "wr512-3gn:green:gateway";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ ap {
	+ label = "wr512-3gn:green:ap";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wps {
	+ label = "wr512-3gn:green:wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ station {
	+ label = "wr512-3gn:green:station";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset_wps {
	+ label = "reset_wps";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ mode {
	+ label = "mode";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&esw {
	+ mediatek,portmap = <0x2f>;
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/WR6202.dts
	===================================================================
	--- sys/gnu/dts/mips/WR6202.dts
	+++ sys/gnu/dts/mips/WR6202.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "WR6202", "ralink,rt3052-soc";
	+ compatible = "accton,wr6202", "ralink,rt3052-soc";
	model = "AWB WR6202";

	chosen {
	@@ -15,12 +18,12 @@

	wps {
	label = "wr6202:blue:wps";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	3g {
	label = "wr6202:blue:3g";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -32,14 +35,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};

	@@ -82,7 +85,7 @@
	usb {
	gpio-export,name = "usb";
	gpio-export,output = <0>;
	- gpios = <&gpio0 11 0>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WRC-1167GHBK2-S.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WRC-1167GHBK2-S.dts
	@@ -0,0 +1,144 @@
	+/dts-v1/;
	+
	+#include "mt7621.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "elecom,wrc-1167ghbk2-s", "mediatek,mt7621-soc";
	+ model = "ELECOM WRC-1167GHBK2-S";
	+
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x8000000>;
	+ };
	+
	+ chosen {
	+ bootargs = "console=ttyS0,57600";
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wlan2g {
	+ label = "wrc-1167ghbk2-s:white:wlan2g";
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan5g {
	+ label = "wrc-1167ghbk2-s:white:wlan5g";
	+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power_green {
	+ label = "wrc-1167ghbk2-s:green:power";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power_blue {
	+ label = "wrc-1167ghbk2-s:blue:power";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ wps {
	+ label = "wrc-1167ghbk2-s:red:wps";
	+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
	+ };
	+
	+ power_red {
	+ label = "wrc-1167ghbk2-s:red:power";
	+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xf20000>;
	+ };
	+
	+ partition@f70000 {
	+ label = "user_data";
	+ reg = <0xf70000 0x80000>;
	+ read-only;
	+ };
	+
	+ partition@ff0000 {
	+ label = "NVRAM";
	+ reg = <0xff0000 0x10000>;
	+ read-only;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uart3", "jtag", "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&pcie {
	+ status = "okay";
	+ // WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
	+ // but it's not supported in OpenWrt.
	+};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/WRH-300CR.dts
	===================================================================
	--- sys/gnu/dts/mips/WRH-300CR.dts
	+++ sys/gnu/dts/mips/WRH-300CR.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc";
	model = "ELECOM WRH-300CR";
	@@ -11,17 +14,17 @@

	wps {
	label = "wrh-300cr:green:wps";
	- gpios = <&gpio2 0 1>;
	+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	};

	ethernet {
	label = "wrh-300cr:green:ethernet";
	- gpios = <&gpio2 3 1>;
	+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	wlan {
	label = "wrh-300cr:green:wlan";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,14 +36,14 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 2 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -65,7 +68,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "mx25l12805d";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WRTNODE.dts
	===================================================================
	--- sys/gnu/dts/mips/WRTNODE.dts
	+++ sys/gnu/dts/mips/WRTNODE.dts
	@@ -2,8 +2,10 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+
	/ {
	- compatible = "wrtnode", "ralink,mt7620n-soc";
	+ compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc";
	model = "WRTNODE";

	gpio-leds {
	@@ -11,7 +13,7 @@

	indicator {
	label = "wrtnode:blue:indicator";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -36,7 +38,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WRTNODE2.dtsi
	===================================================================
	--- sys/gnu/dts/mips/WRTNODE2.dtsi
	+++ sys/gnu/dts/mips/WRTNODE2.dtsi
	@@ -1,6 +1,11 @@
	#include "mt7628an.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	+ compatible = "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
	+
	chosen {
	bootargs = "console=ttyS0,115200";
	};
	@@ -13,8 +18,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 5 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -73,7 +78,7 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	- ralink,port-map = "llllw";
	+ mediatek,portmap = "llllw";
	};

	&sdhci {
	Index: sys/gnu/dts/mips/WRTNODE2P.dts
	===================================================================
	--- sys/gnu/dts/mips/WRTNODE2P.dts
	+++ sys/gnu/dts/mips/WRTNODE2P.dts
	@@ -3,7 +3,7 @@
	#include "WRTNODE2.dtsi"

	/ {
	- compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc";
	+ compatible = "wrtnode,wrtnode2p", "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
	model = "WRTnode2P";

	gpio-leds {
	@@ -11,7 +11,7 @@

	indicator {
	label = "wrtnode:blue:indicator";
	- gpios = <&gpio1 9 1>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WRTNODE2R.dts
	===================================================================
	--- sys/gnu/dts/mips/WRTNODE2R.dts
	+++ sys/gnu/dts/mips/WRTNODE2R.dts
	@@ -3,7 +3,7 @@
	#include "WRTNODE2.dtsi"

	/ {
	- compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc";
	+ compatible = "wrtnode,wrtnode2r", "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
	model = "WRTnode2R";

	gpio-leds {
	@@ -11,7 +11,7 @@

	indicator {
	label = "wrtnode:blue:indicator";
	- gpios = <&gpio1 12 1>;
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/WSR-1166.dts
	===================================================================
	--- sys/gnu/dts/mips/WSR-1166.dts
	+++ sys/gnu/dts/mips/WSR-1166.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
	+ compatible = "buffalo,wsr-1166dhp", "mediatek,mt7621-soc";
	model = "Buffalo WSR-1166DHP";

	memory@0 {
	@@ -20,42 +23,42 @@

	internet_g {
	label = "wsr-1166:green:internet";
	- gpios = <&gpio1 9 1>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};

	router_g {
	label = "wsr-1166:green:router";
	- gpios = <&gpio1 10 1>;
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	};

	router_o {
	label = "wsr-1166:orange:router";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};

	internet_o {
	label = "wsr-1166:orange:internet";
	- gpios = <&gpio1 12 1>;
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};

	wifi_o {
	label = "wsr-1166:orange:wifi";
	- gpios = <&gpio1 13 1>;
	+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "wsr-1166:green:power";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	diag {
	label = "wsr-1166:orange:diag";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	wifi_g {
	label = "wsr-1166:green:wifi";
	- gpios = <&gpio1 16 1>;
	+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -67,47 +70,47 @@

	power {
	label = "power";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x74>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 3 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 6 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	auto {
	label = "mode";
	- gpios = <&gpio0 7 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio0 10 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	router {
	label = "router";
	- gpios = <&gpio0 12 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};

	gpio_poweroff {
	compatible = "gpio-poweroff";
	- gpios = <&gpio0 0 1>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -119,8 +122,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -169,7 +172,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -178,7 +181,10 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/WSR-600.dts
	===================================================================
	--- sys/gnu/dts/mips/WSR-600.dts
	+++ sys/gnu/dts/mips/WSR-600.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
	+ compatible = "buffalo,wsr-600dhp", "mediatek,mt7621-soc";
	model = "Buffalo WSR-600DHP";

	memory@0 {
	@@ -20,42 +23,42 @@

	power {
	label = "wsr-600:green:power";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	wifi_o {
	label = "wsr-600:orange:wifi";
	- gpios = <&gpio1 9 1>;
	+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};

	diag {
	label = "wsr-600:orange:diag";
	- gpios = <&gpio1 10 1>;
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	};

	wifi_g {
	label = "wsr-600:green:wifi";
	- gpios = <&gpio1 12 1>;
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};

	router_o {
	label = "wsr-600:orange:router";
	- gpios = <&gpio1 13 1>;
	+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
	};

	router_g {
	label = "wsr-600:green:router";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	internet_o {
	label = "wsr-600:orange:internet";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	internet_g {
	label = "wsr-600:green:internet";
	- gpios = <&gpio1 16 1>;
	+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -67,47 +70,47 @@

	power {
	label = "power";
	- gpios = <&gpio0 8 1>;
	- linux,code = <0x74>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_POWER>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	aoss {
	label = "aoss";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	auto {
	label = "mode";
	- gpios = <&gpio0 7 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	ap {
	label = "ap";
	- gpios = <&gpio0 6 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};

	router {
	label = "router";
	- gpios = <&gpio0 10 0>;
	- linux,code = <0x100>;
	- linux,input-type = <5>; /* EV_SW */
	+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};

	gpio_poweroff {
	compatible = "gpio-poweroff";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -119,8 +122,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -155,3 +158,27 @@
	};
	};
	};
	+
	+&pcie {
	+ status = "okay";
	+
	+ pcie0 {
	+ rt5592@0,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ ralink,mtd-eeprom = <&factory 0x8000>;
	+ };
	+ };
	+
	+ pcie1 {
	+ mt76@1,0 {
	+ reg = <0x0000 0 0 0 0>;
	+ device_type = "pci";
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	+ };
	+ };
	+};
	+
	+&xhci {
	+ status = "disabled";
	+};
	Index: sys/gnu/dts/mips/WT1520-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/WT1520-4M.dts
	+++ sys/gnu/dts/mips/WT1520-4M.dts
	@@ -2,6 +2,11 @@

	#include "WT1520.dtsi"

	+/ {
	+ compatible = "nexx,wt1520-4m", "nexx,wt1520", "ralink,rt5350-soc";
	+ model = "Nexx WT1520 (4M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WT1520-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/WT1520-8M.dts
	+++ sys/gnu/dts/mips/WT1520-8M.dts
	@@ -2,6 +2,11 @@

	#include "WT1520.dtsi"

	+/ {
	+ compatible = "nexx,wt1520-8m", "nexx,wt1520", "ralink,rt5350-soc";
	+ model = "Nexx WT1520 (8M)";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -10,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/WT1520.dtsi
	===================================================================
	--- sys/gnu/dts/mips/WT1520.dtsi
	+++ sys/gnu/dts/mips/WT1520.dtsi
	@@ -1,29 +1,34 @@
	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "NEXXWT1520", "ralink,rt5350-soc";
	- model = "Nexx WT1520";
	+ compatible = "nexx,wt1520", "ralink,rt5350-soc";

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x2000000>;
	};

	- chosen {
	- bootargs = "console=ttyS1,57600";
	- };
	-};
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;

	-&uart {
	- pinctrl-names = "default";
	- pinctrl-0 = <&uartf_pins>;
	- status = "okay";
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	};

	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "jtag";
	+ ralink,group = "jtag", "uartf";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/WT3020-4M.dts
	===================================================================
	--- sys/gnu/dts/mips/WT3020-4M.dts
	+++ sys/gnu/dts/mips/WT3020-4M.dts
	@@ -1,40 +1,10 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "WT3020.dtsi"

	/ {
	- compatible = "wt3020", "ralink,mt7620n-soc";
	- model = "Nexx WT3020";
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "wt3020:blue:power";
	- gpios = <&gpio3 0 0>;
	- };
	- };
	-};
	-
	-&gpio2 {
	- status = "okay";
	-};
	-
	-&gpio3 {
	- status = "okay";
	+ compatible = "nexx,wt3020-4m", "nexx,wt3020", "ralink,mt7620n-soc";
	+ model = "Nexx WT3020 (4M)";
	};

	&spi0 {
	@@ -45,7 +15,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q32";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -72,29 +41,3 @@
	};
	};
	};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	Index: sys/gnu/dts/mips/WT3020-8M.dts
	===================================================================
	--- sys/gnu/dts/mips/WT3020-8M.dts
	+++ sys/gnu/dts/mips/WT3020-8M.dts
	@@ -1,39 +1,17 @@
	/dts-v1/;

	-#include "mt7620n.dtsi"
	+#include "WT3020.dtsi"

	/ {
	- compatible = "wt3020", "ralink,mt7620n-soc";
	- model = "Nexx WT3020";
	-
	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	-
	- reset {
	- label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "wt3020:blue:power";
	- gpios = <&gpio3 0 0>;
	- };
	- };
	+ compatible = "nexx,wt3020-8m", "nexx,wt3020", "ralink,mt7620n-soc";
	+ model = "Nexx WT3020 (8M)";
	};

	-&gpio2 {
	+&ehci {
	status = "okay";
	};

	-&gpio3 {
	+&ohci {
	status = "okay";
	};

	@@ -45,7 +23,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -72,29 +49,3 @@
	};
	};
	};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	-&ethernet {
	- mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "wllll";
	-};
	-
	-&wmac {
	- ralink,mtd-eeprom = <&factory 0>;
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- default {
	- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	- ralink,function = "gpio";
	- };
	- };
	-};
	Index: sys/gnu/dts/mips/WT3020.dtsi
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/WT3020.dtsi
	@@ -0,0 +1,56 @@
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "nexx,wt3020", "ralink,mt7620n-soc";
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+ };
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ power {
	+ label = "wt3020:blue:power";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+};
	+
	+&gpio2 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	+&ethernet {
	+ mtd-mac-address = <&factory 0x4>;
	+ mediatek,portmap = "wllll";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ default {
	+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	Index: sys/gnu/dts/mips/WZR-AGL300NH.dts
	===================================================================
	--- sys/gnu/dts/mips/WZR-AGL300NH.dts
	+++ sys/gnu/dts/mips/WZR-AGL300NH.dts
	@@ -2,17 +2,16 @@

	#include "rt2880.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
	+ compatible = "buffalo,wzr-agl300nh", "ralink,rt2880-soc";
	model = "Buffalo WZR-AGL300NH";

	pci@440000 {
	- compatible = "ralink,rt288x-pci";
	- reg = <0x00440000 0x20000>;
	- #address-cells = <1>;
	- #size-cells = <1>;
	status = "ok";
	};

	@@ -50,8 +49,8 @@

	rtl8366s {
	compatible = "realtek,rtl8366s";
	- gpio-sda = <&gpio0 1 0>;
	- gpio-sck = <&gpio0 2 0>;
	+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
	+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

	gpio-keys-polled {
	@@ -62,20 +61,20 @@

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	router {
	label = "router_switch";
	- gpios = <&gpio0 7 0>;
	- linux,code = <0x100>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
	+ linux,code = <BTN_0>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -84,22 +83,22 @@

	router {
	label = "wzr-agl300nh:green:router";
	- gpios = <&gpio0 8 1>;
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	};

	diag {
	label = "wzr-agl300nh:red:diag";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	security_g {
	label = "wzr-agl300nh:orange:security_g";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	security_n {
	label = "wzr-agl300nh:orange:security_n";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/X5.dts
	===================================================================
	--- sys/gnu/dts/mips/X5.dts
	+++ sys/gnu/dts/mips/X5.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "X5", "ralink,rt5350-soc";
	+ compatible = "poray,x5", "ralink,rt5350-soc";
	model = "Poray X5";

	gpio-leds {
	@@ -11,22 +14,22 @@

	power {
	label = "x5:green:power";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	20 {
	label = "x5:green:20";
	- gpios = <&gpio0 12 1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	50 {
	label = "x5:green:50";
	- gpios = <&gpio0 11 1>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	};

	80 {
	label = "x5:green:80";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -38,21 +41,21 @@

	bat {
	label = "bat";
	- gpios = <&gpio0 9 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	mode {
	label = "mode";
	- gpios = <&gpio0 14 1>;
	- linux,code = <0x100>;
	- linux,input-type = <5>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ linux,input-type = <EV_SW>;
	};
	};

	@@ -63,7 +66,7 @@
	usb-mode {
	gpio-export,name = "usb-mode";
	gpio-export,output = <0>;
	- gpios = <&gpio0 18 0>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -76,7 +79,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/X8.dts
	===================================================================
	--- sys/gnu/dts/mips/X8.dts
	+++ sys/gnu/dts/mips/X8.dts
	@@ -2,8 +2,11 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "X8", "ralink,rt5350-soc";
	+ compatible = "poray,x8", "ralink,rt5350-soc";
	model = "Poray X8";

	gpio-leds {
	@@ -11,7 +14,7 @@

	power {
	label = "x8:green:power";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -23,8 +26,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,7 +40,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/XDXRN502J.dts
	===================================================================
	--- sys/gnu/dts/mips/XDXRN502J.dts
	+++ sys/gnu/dts/mips/XDXRN502J.dts
	@@ -2,8 +2,11 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "XDXRN502J", "ralink,rt3052-soc";
	+ compatible = "unbranded,xdxrn502j", "ralink,rt3052-soc";
	model = "XDX RN502J";

	cfi@1f000000 {
	@@ -43,12 +46,12 @@

	wifi {
	label = "xdxrn502j:green:wifi";
	- gpios = <&gpio0 7 1>;
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	};

	power {
	label = "xdxrn502j:green:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,8 +63,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	Index: sys/gnu/dts/mips/Y1.dts
	===================================================================
	--- sys/gnu/dts/mips/Y1.dts
	+++ sys/gnu/dts/mips/Y1.dts
	@@ -3,7 +3,7 @@
	#include "Y1.dtsi"

	/ {
	- compatible = "lenovo,Y1", "ralink,mt7620a-soc";
	+ compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
	model = "Lenovo Y1";

	gpio-leds {
	@@ -11,32 +11,32 @@

	power1 {
	label = "y1:blue:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan1 {
	label = "y1:blue:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan2 {
	label = "y1:blue:wifi5g";
	- gpios = <&gpio2 10 1>;
	+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "y1:blue:usb";
	- gpios = <&gpio2 12 1>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "y1:blue:lan";
	- gpios = <&gpio2 15 1>;
	+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "y1:blue:internet";
	- gpios = <&gpio2 11 1>;
	+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/Y1.dtsi
	===================================================================
	--- sys/gnu/dts/mips/Y1.dtsi
	+++ sys/gnu/dts/mips/Y1.dtsi
	@@ -1,6 +1,11 @@
	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	+ compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
	+
	chosen {
	bootargs = "console=ttyS0,115200";
	};
	@@ -13,8 +18,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 11 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -39,7 +44,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -83,13 +87,15 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};

	&pinctrl {
	@@ -98,10 +104,5 @@
	ralink,group = "uartf", "wled", "nd_sd";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};
	Index: sys/gnu/dts/mips/Y1S.dts
	===================================================================
	--- sys/gnu/dts/mips/Y1S.dts
	+++ sys/gnu/dts/mips/Y1S.dts
	@@ -3,7 +3,7 @@
	#include "Y1.dtsi"

	/ {
	- compatible = "lenovo,Y1S", "ralink,mt7620a-soc";
	+ compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
	model = "Lenovo Y1S";

	gpio_export {
	@@ -13,17 +13,17 @@
	usb0 {
	gpio-export,name = "usb0";
	gpio-export,output = <1>; // GPIOF_OUT_INIT_HIGH
	- gpios = <&gpio2 14 0>; // GPIO2:40+14=GPIO 54
	+ gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; // GPIO2:40+14=GPIO 54
	};
	usb1 {
	gpio-export,name = "usb1";
	gpio-export,output = <1>;
	- gpios = <&gpio2 15 0>;
	+ gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
	};
	usb2 {
	gpio-export,name = "usb2";
	gpio-export,output = <1>;
	- gpios = <&gpio2 16 0>;
	+ gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -32,37 +32,37 @@

	power1 {
	label = "y1s:yellow:power";
	- gpios = <&gpio0 14 1>;
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	power2 {
	label = "y1s:blue:power";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	wlan1 {
	label = "y1s:yellow:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};

	wlan2 {
	label = "y1s:blue:wifi";
	- gpios = <&gpio2 10 1>;
	+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
	};

	usb1 {
	label = "y1s:yellow:usb";
	- gpios = <&gpio2 13 1>;
	+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
	};

	usb2 {
	label = "y1s:blue:usb";
	- gpios = <&gpio2 12 1>;
	+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	};

	internet {
	label = "y1s:blue:internet";
	- gpios = <&gpio2 11 1>;
	+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
	};
	};
	};
	Index: sys/gnu/dts/mips/YOUKU-YK1.dts
	===================================================================
	--- sys/gnu/dts/mips/YOUKU-YK1.dts
	+++ sys/gnu/dts/mips/YOUKU-YK1.dts
	@@ -2,27 +2,30 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "YOUKU-YK1", "ralink,mt7620a-soc";
	+ compatible = "youku,yk1", "ralink,mt7620a-soc";
	model = "YOUKU YK1";

	gpio-leds {
	compatible = "gpio-leds";
	wan {
	label = "youku-yk1:blue:wan";
	- gpios = <&gpio2 4 1>;
	+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};
	air {
	label = "youku-yk1:blue:air";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	usb {
	label = "youku-yk1:blue:usb";
	- gpios = <&gpio1 11 1>;
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
	power {
	label = "youku-yk1:blue:power";
	- gpios = <&gpio1 5 1>;
	+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,8 +36,8 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q256";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -94,7 +96,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	default {
	- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
	+ ralink,group = "i2c", "rgmii1", "ephy", "wled";
	ralink,function = "gpio";
	};
	};
	@@ -102,7 +104,6 @@

	&ethernet {
	pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "llllw";
	};
	Index: sys/gnu/dts/mips/ZBT-APE522II.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-APE522II.dts
	+++ sys/gnu/dts/mips/ZBT-APE522II.dts
	@@ -2,9 +2,12 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
	- model = "Xiaomi MiWiFi Mini";
	+ compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
	+ model = "ZBT-APE522II";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -13,19 +16,29 @@
	gpio-leds {
	compatible = "gpio-leds";

	- blue {
	- label = "miwifi-mini:blue:status";
	- gpios = <&gpio1 0 1>;
	+ sys1 {
	+ label = "zbt-ape522ii:green:sys1";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ sys2 {
	+ label = "zbt-ape522ii:green:sys2";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	- yellow {
	- label = "miwifi-mini:yellow:status";
	- gpios = <&gpio1 2 1>;
	+ sys3 {
	+ label = "zbt-ape522ii:green:sys3";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};

	- red {
	- label = "miwifi-mini:red:status";
	- gpios = <&gpio1 5 1>;
	+ sys4 {
	+ label = "zbt-ape522ii:green:sys4";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wlan2g4 {
	+ label = "zbt-ape522ii:green:wlan2g4";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +50,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio1 6 0>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -55,6 +68,10 @@
	status = "okay";
	};

	+&gpio3 {
	+ status = "okay";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -63,7 +80,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "w25q128";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -87,42 +103,20 @@
	label = "firmware";
	reg = <0x50000 0xf80000>;
	};
	-
	- partition@fd0000 {
	- label = "crash";
	- reg = <0xfd0000 0x10000>;
	- };
	-
	- partition@fe0000 {
	- label = "reserved";
	- reg = <0xfe0000 0x10000>;
	- read-only;
	- };
	-
	- partition@ff0000 {
	- label = "Bdata";
	- reg = <0xff0000 0x10000>;
	- };
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	- mediatek,portmap = "llllw";
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&pa_pins>;
	};

	&pcie {
	@@ -133,7 +127,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -141,13 +135,8 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "rgmii1";
	+ ralink,group = "wled", "i2c", "uartf", "wdt";
	ralink,function = "gpio";
	};
	-
	- pa {
	- ralink,group = "pa";
	- ralink,function = "pa";
	- };
	};
	};
	Index: sys/gnu/dts/mips/ZBT-CPE102.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-CPE102.dts
	+++ sys/gnu/dts/mips/ZBT-CPE102.dts
	@@ -2,9 +2,12 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
	- model = "Zbtlink ZBT-WA05";
	+ compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
	+ model = "Zbtlink ZBT-CPE102";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -13,19 +16,19 @@
	gpio-leds {
	compatible = "gpio-leds";

	- power {
	- label = "zbt-wa05:blue:power";
	- gpios = <&gpio1 14 1>;
	+ 4g-0 {
	+ label = "zbt-cpe102:green:4g-0";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	- usb {
	- label = "zbt-wa05:blue:usb";
	- gpios = <&gpio1 15 0>;
	+ 4g-1 {
	+ label = "zbt-cpe102:green:4g-1";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	};

	- air {
	- label = "zbt-wa05:blue:air";
	- gpios = <&gpio3 0 1>;
	+ 4g-2 {
	+ label = "zbt-cpe102:green:4g-2";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +40,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ZBT-WA05.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WA05.dts
	+++ sys/gnu/dts/mips/ZBT-WA05.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
	model = "Zbtlink ZBT-WA05";
	@@ -15,17 +18,17 @@

	power {
	label = "zbt-wa05:blue:power";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	label = "zbt-wa05:blue:usb";
	- gpios = <&gpio1 15 0>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	};

	air {
	label = "zbt-wa05:blue:air";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +40,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -63,7 +66,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	Index: sys/gnu/dts/mips/ZBT-WE1226.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE1226.dts
	+++ sys/gnu/dts/mips/ZBT-WE1226.dts
	@@ -1,50 +1,65 @@
	/dts-v1/;
	+#include <dt-bindings/input/input.h>
	+#include <dt-bindings/gpio/gpio.h>

	-#include "mt7621.dtsi"
	+#include "mt7628an.dtsi"

	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Linksys RE6500";
	+ compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc";
	+ model = "Zbtlink ZBT-WE1226";
	+
	+ chosen {
	+ bootargs = "console=ttyS0,115200";
	+ };

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x4000000>;
	};

	- chosen {
	- bootargs = "console=ttyS0,57600";
	+ gpio-keys-polled {
	+ compatible = "gpio-keys-polled";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	};

	gpio-leds {
	compatible = "gpio-leds";

	- wifi {
	- label = "re6500:orange:wifi";
	- gpios = <&gpio0 0 0>;
	+ wan {
	+ label = "zbt-we1226:green:wan";
	+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
	};

	- power {
	- label = "re6500:white:power";
	- gpios = <&gpio0 9 0>;
	+ lan1 {
	+ label = "zbt-we1226:green:lan1";
	+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
	- };

	- gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	- #address-cells = <1>;
	- #size-cells = <0>;
	- poll-interval = <20>;
	+ lan2 {
	+ label = "zbt-we1226:green:lan2";
	+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	+ };

	- wps {
	- label = "wps";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x211>;
	+ wlan {
	+ label = "zbt-we1226:green:wlan";
	+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	};
	+ };
	+};

	- reset {
	- label = "reset";
	- gpios = <&gpio0 11 0>;
	- linux,code = <0x198>;
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
	+ ralink,function = "gpio";
	};
	};
	};
	@@ -57,8 +72,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -85,37 +100,12 @@
	};
	};

	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "i2c", "uart2", "uart3", "rgmii2";
	- ralink,function = "gpio";
	- };
	- };
	-};
	-
	-&pcie {
	+&wmac {
	status = "okay";
	-
	- pcie0 {
	- mt76@0,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,2ghz = <0>;
	- };
	- };
	-
	- pcie1 {
	- mt76@1,0 {
	- reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,5ghz = <0>;
	- };
	- };
	+ ralink,mtd-eeprom = <&factory 0x4>;
	};

	&ethernet {
	mtd-mac-address = <&factory 0x2e>;
	+ mediatek,portmap = "llllw";
	};
	Index: sys/gnu/dts/mips/ZBT-WE1326.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE1326.dts
	+++ sys/gnu/dts/mips/ZBT-WE1326.dts
	@@ -2,26 +2,20 @@

	#include "mt7621.dtsi"

	-/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "Firefly FireWRT";
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	- memory@0 {
	- device_type = "memory";
	- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	- };
	+/ {
	+ compatible = "zbtlink,zbt-we1326", "mediatek,mt7621-soc";
	+ model = "ZBT-WE1326";

	chosen {
	- bootargs = "console=ttyS0,57600";
	+ bootargs = "console=ttyS0,115200";
	};

	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- power {
	- label = "firewrt:green:power";
	- gpios = <&gpio0 22 1>;
	- };
	+ memory@0 {
	+ device_type = "memory";
	+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
	};

	gpio-keys-polled {
	@@ -30,22 +24,21 @@
	#size-cells = <0>;
	poll-interval = <20>;

	- wps {
	- label = "wps";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x211>;
	- };
	-
	- power {
	- label = "power";
	- gpios = <&gpio0 23 1>;
	- linux,code = <116>;
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};

	-&sdhci {
	- status = "okay";
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "wdt";
	+ ralink,function = "gpio";
	+ };
	+ };
	};

	&spi0 {
	@@ -56,8 +49,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -84,6 +77,10 @@
	};
	};

	+&ethernet {
	+ mtd-mac-address = <&factory 0xe000>;
	+};
	+
	&pcie {
	status = "okay";

	@@ -92,7 +89,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -101,20 +98,11 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};

	-&ethernet {
	- mtd-mac-address = <&factory 0xe000>;
	-};
	-
	-&pinctrl {
	- state_default: pinctrl0 {
	- gpio {
	- ralink,group = "wdt", "rgmii2";
	- ralink,function = "gpio";
	- };
	- };
	+&sdhci {
	+ status = "okay";
	};
	Index: sys/gnu/dts/mips/ZBT-WE2026.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE2026.dts
	+++ sys/gnu/dts/mips/ZBT-WE2026.dts
	@@ -1,10 +1,13 @@
	/dts-v1/;

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	#include "mt7620n.dtsi"

	/ {
	- compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
	- model = "Zbtlink ZBT-WA05";
	+ compatible = "zbtlink,zbt-we2026", "ralink,mt7620n-soc";
	+ model = "Zbtlink ZBT-WE2026";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -14,18 +17,13 @@
	compatible = "gpio-leds";

	power {
	- label = "zbt-wa05:blue:power";
	- gpios = <&gpio1 14 1>;
	- };
	-
	- usb {
	- label = "zbt-wa05:blue:usb";
	- gpios = <&gpio1 15 0>;
	+ label = "zbt-we2026:red:power";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	- air {
	- label = "zbt-wa05:blue:air";
	- gpios = <&gpio3 0 1>;
	+ wlan {
	+ label = "zbt-we2026:green:wlan";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -37,8 +35,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -47,10 +45,6 @@
	status = "okay";
	};

	-&gpio2 {
	- status = "okay";
	-};
	-
	&gpio3 {
	status = "okay";
	};
	@@ -63,7 +57,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -91,14 +84,6 @@
	};
	};

	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	-};
	-
	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	Index: sys/gnu/dts/mips/ZBT-WE3526.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE3526.dts
	+++ sys/gnu/dts/mips/ZBT-WE3526.dts
	@@ -2,9 +2,12 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG3526";
	+ compatible = "zbtlink,zbt-we3526", "mediatek,mt7621-soc";
	+ model = "ZBT-WE3526";

	memory@0 {
	device_type = "memory";
	@@ -17,12 +20,6 @@

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};
	};
	@@ -35,17 +32,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	- };
	- };
	-
	- gpio-leds {
	- compatible = "gpio-leds";
	-
	- status {
	- label = "zbt-wg3526:green:status";
	- gpios = <&gpio0 24 1>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -62,8 +50,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -83,7 +71,7 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	reg = <0x50000 0xfb0000>;
	};
	@@ -94,20 +82,23 @@
	status = "okay";

	pcie0 {
	- mt76@0,0 {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x8000>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	+
	+ led {
	+ led-sources = <2>;
	+ };
	};
	};

	pcie1 {
	- mt76@1,0 {
	+ wifi@14c3,7603 {
	+ compatible = "pci14c3,7603";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	- mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ mediatek,mtd-eeprom = <&factory 0x0000>;
	};
	};
	};
	@@ -119,7 +110,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WE826-16M.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE826-16M.dts
	+++ sys/gnu/dts/mips/ZBT-WE826-16M.dts
	@@ -1,16 +1,20 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "ZBT-WE826.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,zbt-we826-16m", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
	+ model = "ZBT-WE826 (16M)";
	+};

	&spi0 {
	status = "okay";

	- m25p80@0 {
	+ en25q128@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -31,9 +35,9 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x3b0000>;
	+ reg = <0x50000 0xfb0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WE826-32M.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE826-32M.dts
	+++ sys/gnu/dts/mips/ZBT-WE826-32M.dts
	@@ -1,16 +1,20 @@
	/dts-v1/;

	-#include "WT1520.dtsi"
	+#include "ZBT-WE826.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,zbt-we826-32m", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
	+ model = "ZBT-WE826 (32M)";
	+};

	&spi0 {
	status = "okay";

	- m25p80@0 {
	+ en25q128@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -31,9 +35,9 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	- reg = <0x50000 0x7b0000>;
	+ reg = <0x50000 0x1fb0000>;
	};
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WE826.dtsi
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WE826.dtsi
	+++ sys/gnu/dts/mips/ZBT-WE826.dtsi
	@@ -1,10 +1,10 @@
	-/dts-v1/;
	-
	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
	- model = "ZBT-WE826";

	chosen {
	bootargs = "console=ttyS0,115200";
	@@ -14,15 +14,15 @@
	compatible = "gpio-leds";
	power {
	label = "zbt-we826:green:power";
	- gpios = <&gpio1 14 0>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
	};
	usb {
	label = "zbt-we826:green:usb";
	- gpios = <&gpio1 15 0>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	};
	air {
	label = "zbt-we826:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,8 +33,8 @@
	poll-interval = <20>;
	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -51,42 +51,6 @@
	status = "okay";
	};

	-&spi0 {
	- status = "okay";
	-
	- en25q128@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- compatible = "w25q128";
	- reg = <0>;
	- linux,modalias = "m25p80";
	- spi-max-frequency = <10000000>;
	-
	- partition@0 {
	- label = "u-boot";
	- reg = <0x0 0x30000>;
	- read-only;
	- };
	-
	- partition@30000 {
	- label = "u-boot-env";
	- reg = <0x30000 0x10000>;
	- read-only;
	- };
	-
	- factory: partition@40000 {
	- label = "factory";
	- reg = <0x40000 0x10000>;
	- read-only;
	- };
	-
	- partition@50000 {
	- label = "firmware";
	- reg = <0x50000 0xfb0000>;
	- };
	- };
	-};
	-
	&sdhci {
	status = "okay";
	};
	@@ -101,7 +65,7 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	- ralink,port-map = "wllll";
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	Index: sys/gnu/dts/mips/ZBT-WG2626.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WG2626.dts
	+++ sys/gnu/dts/mips/ZBT-WG2626.dts
	@@ -2,8 +2,11 @@

	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	+ compatible = "zbtlink,zbt-wg2626", "mediatek,mt7621-soc";
	model = "ZBT-WG2626";

	memory@0 {
	@@ -17,12 +20,6 @@

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};
	};
	@@ -35,8 +32,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -45,7 +42,7 @@

	status {
	label = "zbt-wg2626:green:status";
	- gpios = <&gpio0 24 1>;
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -62,8 +59,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -98,7 +95,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};

	@@ -107,7 +104,7 @@
	reg = <0x0000 0 0 0 0>;
	device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	+ ieee80211-freq-limit = <2400000 2500000>;
	};
	};
	};
	@@ -119,7 +116,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WG3526-16M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ZBT-WG3526-16M.dts
	@@ -0,0 +1,12 @@
	+/dts-v1/;
	+
	+#include "ZBT-WG3526.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,zbt-wg3526-16m", "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
	+ model = "ZBT-WG3526 (16M)";
	+};
	+
	+&firmware {
	+ reg = <0x50000 0xfb0000>;
	+};
	Index: sys/gnu/dts/mips/ZBT-WG3526-32M.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/ZBT-WG3526-32M.dts
	@@ -0,0 +1,12 @@
	+/dts-v1/;
	+
	+#include "ZBT-WG3526.dtsi"
	+
	+/ {
	+ compatible = "zbtlink,zbt-wg3526-32m", "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
	+ model = "ZBT-WG3526 (32M)";
	+};
	+
	+&firmware {
	+ reg = <0x50000 0x1fb0000>;
	+};
	Index: sys/gnu/dts/mips/ZBT-WG3526.dtsi
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WG3526.dtsi
	+++ sys/gnu/dts/mips/ZBT-WG3526.dtsi
	@@ -1,10 +1,10 @@
	-/dts-v1/;
	-
	#include "mt7621.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	- model = "ZBT-WG3526";
	+ compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";

	memory@0 {
	device_type = "memory";
	@@ -17,12 +17,6 @@

	palmbus: palmbus@1E000000 {
	i2c@900 {
	- compatible = "ralink,i2c-mt7621";
	- reg = <0x900 0x100>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	- pinctrl-names = "default";
	- pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};
	};
	@@ -35,8 +29,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 18 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};

	@@ -45,7 +39,7 @@

	status {
	label = "zbt-wg3526:green:status";
	- gpios = <&gpio0 24 1>;
	+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
	};
	};
	};
	@@ -62,8 +56,8 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;
	+ m25p,chunked-io = <32>;

	partition@0 {
	label = "u-boot";
	@@ -83,9 +77,8 @@
	read-only;
	};

	- partition@50000 {
	+ firmware: partition@50000 {
	label = "firmware";
	- reg = <0x50000 0xfb0000>;
	};
	};
	};
	@@ -94,20 +87,19 @@
	status = "okay";

	pcie0 {
	- mt76@0,0 {
	+ wifi@14c3,7603 {
	+ compatible = "pci14c3,7603";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};

	pcie1 {
	- mt76@1,0 {
	+ wifi@14c3,7662 {
	+ compatible = "pci14c3,7662";
	reg = <0x0000 0 0 0 0>;
	- device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;
	- mediatek,2ghz = <0>;
	+ ieee80211-freq-limit = <5000000 6000000>;
	};
	};
	};
	@@ -119,7 +111,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
	+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
	ralink,function = "gpio";
	};
	};
	Index: sys/gnu/dts/mips/ZBT-WR8305RT.dts
	===================================================================
	--- sys/gnu/dts/mips/ZBT-WR8305RT.dts
	+++ sys/gnu/dts/mips/ZBT-WR8305RT.dts
	@@ -2,6 +2,9 @@

	#include "mt7620n.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
	model = "Zbtlink ZBT-WR8305RT";
	@@ -11,17 +14,17 @@

	sys {
	label = "zbt-wr8305rt:green:sys";
	- gpios = <&gpio1 14 1>;
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	lan {
	label = "zbt-wr8305rt:green:usb";
	- gpios = <&gpio1 15 1>;
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "zbt-wr8305rt:green:wifi";
	- gpios = <&gpio3 0 1>;
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -33,8 +36,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 1 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -55,7 +58,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -92,6 +94,8 @@
	};

	&ethernet {
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "llllw";
	};
	@@ -102,11 +106,6 @@

	&pinctrl {
	state_default: pinctrl0 {
	- ephy {
	- ralink,group = "ephy";
	- ralink,function = "ephy";
	- };
	-
	default {
	ralink,group = "i2c", "uartf", "spi refclk", "wled";
	ralink,function = "gpio";
	Index: sys/gnu/dts/mips/ZL5900V2.dts
	===================================================================
	--- sys/gnu/dts/mips/ZL5900V2.dts
	+++ sys/gnu/dts/mips/ZL5900V2.dts
	@@ -2,16 +2,24 @@

	#include "rt5350.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "X8", "ralink,rt5350-soc";
	- model = "Poray X8";
	+ compatible = "zorlik,zl5900v2", "ralink,rt5350-soc";
	+ model = "Zorlik ZL5900V2";

	gpio-leds {
	compatible = "gpio-leds";

	+ lan {
	+ label = "zl5900v2:green:lan";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	+ };
	+
	power {
	- label = "x8:green:power";
	- gpios = <&gpio0 13 1>;
	+ label = "zl5900v2:blue:power";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
	};
	};

	@@ -23,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -37,7 +45,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "gd25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -68,7 +75,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "uartf";
	+ ralink,group = "jtag", "uartf";
	ralink,function = "gpio";
	};
	};
	@@ -79,19 +86,10 @@
	};

	&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <1>;
	+ mediatek,portmap = <0>;
	+ mediatek,portdisable = <0x2f>;
	};

	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	- ralink,led-polarity = <1>;
	-};
	-
	-&ehci {
	- status = "okay";
	-};
	-
	-&ohci {
	- status = "okay";
	};
	Index: sys/gnu/dts/mips/ZTE-Q7.dts
	===================================================================
	--- sys/gnu/dts/mips/ZTE-Q7.dts
	+++ sys/gnu/dts/mips/ZTE-Q7.dts
	@@ -2,8 +2,11 @@

	#include "mt7620a.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "ZTE-Q7", "ralink,mt7620a-soc";
	+ compatible = "zte,q7", "ralink,mt7620a-soc";
	model = "ZTE Q7";

	gpio-leds {
	@@ -11,12 +14,12 @@

	statred {
	label = "zte-q7:red:status";
	- gpios = <&gpio0 13 1>;
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	statblue {
	label = "zte-q7:blue:status";
	- gpios = <&gpio0 9 1>;
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -28,8 +31,8 @@

	reset {
	label = "reset";
	- gpios = <&gpio1 2 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};
	};
	};
	@@ -50,7 +53,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "en25q64";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -88,8 +90,6 @@
	};

	&ethernet {
	- pinctrl-names = "default";
	- pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
	};
	@@ -109,3 +109,7 @@
	&ohci {
	status = "okay";
	};
	+
	+&gsw {
	+ mediatek,port4 = "ephy";
	+};
	Index: sys/gnu/dts/mips/kn.dts
	===================================================================
	--- sys/gnu/dts/mips/kn.dts
	+++ sys/gnu/dts/mips/kn.dts
	@@ -2,9 +2,12 @@

	#include "rt3050.dtsi"

	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	/ {
	- compatible = "NBG-419N", "ralink,rt3052-soc";
	- model = "ZyXEL NBG-419N";
	+ compatible = "zyxel,keenetic", "ralink,rt3052-soc";
	+ model = "ZyXEL Keenetic";

	cfi@1f000000 {
	compatible = "cfi-flash";
	@@ -42,13 +45,18 @@
	compatible = "gpio-leds";

	power {
	- label = "nbg-419n:green:power";
	- gpios = <&gpio0 9 1>;
	+ label = "kn:green:power";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "kn:green:usb";
	+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};

	wps {
	- label = "nbg-419n:green:wps";
	- gpios = <&gpio0 14 1>;
	+ label = "kn:green:wps";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};
	};

	@@ -60,14 +68,21 @@

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ rfkill {
	+ label = "rfkill";
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ linux,code = <KEY_RFKILL>;
	+ linux,input-type = <EV_SW>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	};
	};
	};
	@@ -75,7 +90,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "uartf";
	ralink,function = "gpio";
	};
	};
	@@ -92,3 +107,7 @@
	&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	};
	+
	+&otg {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/kn_rc.dts
	===================================================================
	--- sys/gnu/dts/mips/kn_rc.dts
	+++ sys/gnu/dts/mips/kn_rc.dts
	@@ -1,46 +1,60 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "DIR-320-B1", "ralink,rt5350-soc";
	- model = "D-Link DIR-320 B1";
	+ compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc";
	+ model = "ZyXEL Keenetic Omni";

	gpio-leds {
	compatible = "gpio-leds";

	- status {
	- label = "dir-320-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ wan {
	+ label = "kn_rc:green:wan";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	- label = "dir-320-b1:green:usb";
	- gpios = <&gpio0 14 1>;
	+ label = "kn_rc:green:usb";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};

	- wps {
	- label = "dir-320-b1:green:wps";
	- gpios = <&gpio0 13 1>;
	+ wifi {
	+ label = "kn_rc:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "kn_rc:green:power";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};
	};

	gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	+ compatible = "gpio-keys";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ fn {
	+ label = "fn";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};

	@@ -48,20 +62,22 @@
	compatible = "gpio-export";
	#size-cells = <0>;

	- usb {
	+ usb_power {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	- };
	-
	- root_hub {
	- gpio-export,name = "root_hub";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
	};
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -70,7 +86,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -101,7 +116,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
	ralink,function = "gpio";
	};
	};
	@@ -109,11 +124,7 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	+ mediatek,portmap = "llllw";
	};

	&wmac {
	Index: sys/gnu/dts/mips/kn_rf.dts
	===================================================================
	--- sys/gnu/dts/mips/kn_rf.dts
	+++ sys/gnu/dts/mips/kn_rf.dts
	@@ -1,46 +1,60 @@
	/dts-v1/;

	-#include "rt5350.dtsi"
	+#include "mt7620n.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>

	/ {
	- compatible = "DIR-320-B1", "ralink,rt5350-soc";
	- model = "D-Link DIR-320 B1";
	+ compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc";
	+ model = "ZyXEL Keenetic Omni II";

	gpio-leds {
	compatible = "gpio-leds";

	- status {
	- label = "dir-320-b1:green:status";
	- gpios = <&gpio0 9 1>;
	+ wan {
	+ label = "kn_rc:green:wan";
	+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	};

	usb {
	- label = "dir-320-b1:green:usb";
	- gpios = <&gpio0 14 1>;
	+ label = "kn_rc:green:usb";
	+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
	};

	- wps {
	- label = "dir-320-b1:green:wps";
	- gpios = <&gpio0 13 1>;
	+ wifi {
	+ label = "kn_rc:green:wifi";
	+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "kn_rc:green:power";
	+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	};
	};

	gpio-keys-polled {
	- compatible = "gpio-keys-polled";
	+ compatible = "gpio-keys";
	#address-cells = <1>;
	#size-cells = <0>;
	poll-interval = <20>;

	reset {
	label = "reset";
	- gpios = <&gpio0 10 1>;
	- linux,code = <0x198>;
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	};

	wps {
	label = "wps";
	- gpios = <&gpio0 0 1>;
	- linux,code = <0x211>;
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ fn {
	+ label = "fn";
	+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	};
	};

	@@ -48,20 +62,22 @@
	compatible = "gpio-export";
	#size-cells = <0>;

	- usb {
	+ usb_power {
	gpio-export,name = "usb";
	gpio-export,output = <1>;
	- gpios = <&gpio0 7 0>;
	- };
	-
	- root_hub {
	- gpio-export,name = "root_hub";
	- gpio-export,output = <1>;
	- gpios = <&gpio0 12 0>;
	+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
	};
	};
	};

	+&gpio1 {
	+ status = "okay";
	+};
	+
	+&gpio3 {
	+ status = "okay";
	+};
	+
	&spi0 {
	status = "okay";

	@@ -70,7 +86,6 @@
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	- linux,modalias = "m25p80", "s25fl064k";
	spi-max-frequency = <10000000>;

	partition@0 {
	@@ -101,7 +116,7 @@
	&pinctrl {
	state_default: pinctrl0 {
	gpio {
	- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
	+ ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
	ralink,function = "gpio";
	};
	};
	@@ -109,11 +124,7 @@

	&ethernet {
	mtd-mac-address = <&factory 0x4>;
	-};
	-
	-&esw {
	- mediatek,portmap = <0x2f>;
	- mediatek,led_polarity = <0x17>;
	+ mediatek,portmap = "wllll";
	};

	&wmac {
	Index: sys/gnu/dts/mips/kng_rc.dts
	===================================================================
	--- /dev/null
	+++ sys/gnu/dts/mips/kng_rc.dts
	@@ -0,0 +1,166 @@
	+/dts-v1/;
	+
	+#include "mt7620a.dtsi"
	+
	+#include <dt-bindings/gpio/gpio.h>
	+#include <dt-bindings/input/input.h>
	+
	+/ {
	+ compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc";
	+ model = "ZyXEL Keenetic Viva";
	+
	+ gpio-leds {
	+ compatible = "gpio-leds";
	+
	+ wan {
	+ label = "kng_rc:green:wan";
	+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ usb {
	+ label = "kng_rc:green:usb";
	+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power_alert {
	+ label = "kng_rc:red:power";
	+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ wifi {
	+ label = "kng_rc:green:wifi";
	+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
	+ };
	+
	+ power {
	+ label = "kng_rc:green:power";
	+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	+ };
	+ };
	+
	+ gpio-keys-polled {
	+ compatible = "gpio-keys";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+ poll-interval = <20>;
	+
	+ reset {
	+ label = "reset";
	+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_RESTART>;
	+ };
	+
	+ wps {
	+ label = "wps";
	+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
	+ linux,code = <KEY_WPS_BUTTON>;
	+ };
	+
	+ fn {
	+ label = "fn";
	+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
	+ linux,code = <BTN_0>;
	+ };
	+ };
	+
	+ gpio_export {
	+ compatible = "gpio-export";
	+ #size-cells = <0>;
	+
	+ usb_power {
	+ gpio-export,name = "usb";
	+ gpio-export,output = <1>;
	+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
	+ };
	+ };
	+
	+ rtl8367rb {
	+ compatible = "realtek,rtl8367b";
	+ cpu_port = <7>;
	+ realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
	+ mdio = <&mdio0>;
	+ };
	+};
	+
	+&spi0 {
	+ status = "okay";
	+
	+ m25p80@0 {
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ compatible = "jedec,spi-nor";
	+ reg = <0>;
	+ spi-max-frequency = <10000000>;
	+
	+ partition@0 {
	+ label = "u-boot";
	+ reg = <0x0 0x30000>;
	+ read-only;
	+ };
	+
	+ partition@30000 {
	+ label = "u-boot-env";
	+ reg = <0x30000 0x10000>;
	+ read-only;
	+ };
	+
	+ factory: partition@40000 {
	+ label = "factory";
	+ reg = <0x40000 0x10000>;
	+ read-only;
	+ };
	+
	+ partition@50000 {
	+ label = "firmware";
	+ reg = <0x50000 0xfb0000>;
	+ };
	+ };
	+};
	+
	+&pinctrl {
	+ state_default: pinctrl0 {
	+ gpio {
	+ ralink,group = "i2c", "uartf";
	+ ralink,function = "gpio";
	+ };
	+ };
	+};
	+
	+&ethernet {
	+ status = "okay";
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
	+ mtd-mac-address = <&factory 0x00004>;
	+
	+ port@4 {
	+ status = "okay";
	+ mediatek,fixed-link = <1000 1 1 1>;
	+ phy-mode = "rgmii";
	+ phy-handle = <&phy4>;
	+ };
	+
	+ mdio0: mdio-bus {
	+ status = "okay";
	+
	+ phy4: ethernet-phy@4 {
	+ reg = <4>;
	+ phy-mode = "rgmii";
	+ };
	+ };
	+};
	+
	+&gsw {
	+ mediatek,port4 = "gmac";
	+};
	+
	+&wmac {
	+ ralink,mtd-eeprom = <&factory 0>;
	+};
	+
	+&ehci {
	+ status = "okay";
	+};
	+
	+&ohci {
	+ status = "okay";
	+};
	Index: sys/gnu/dts/mips/mt7620a.dtsi
	===================================================================
	--- sys/gnu/dts/mips/mt7620a.dtsi
	+++ sys/gnu/dts/mips/mt7620a.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -176,7 +176,7 @@
	};

	i2c: i2c@900 {
	- compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
	+ compatible = "ralink,rt2880-i2c";
	reg = <0x900 0x100>;

	resets = <&rstctrl 16>;
	@@ -192,7 +192,7 @@
	};

	i2s: i2s@a00 {
	- compatible = "ralink,mt7620a-i2s";
	+ compatible = "mediatek,mt7620-i2s";
	reg = <0xa00 0x100>;

	resets = <&rstctrl 17>;
	@@ -201,8 +201,11 @@
	interrupt-parent = <&intc>;
	interrupts = <10>;

	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	dmas = <&gdma 4>,
	- <&gdma 5>;
	+ <&gdma 6>;
	dma-names = "tx", "rx";

	status = "disabled";
	@@ -281,7 +284,7 @@
	};

	gdma: gdma@2800 {
	- compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
	+ compatible = "ralink,mt7620a-gdma", "ralink,rt3883-gdma";
	reg = <0x2800 0x800>;

	resets = <&rstctrl 14>;
	@@ -320,6 +323,13 @@
	};
	};

	+ gpio_i2s_pins: gpio_i2s {
	+ gpio_i2s {
	+ ralink,group = "uartf";
	+ ralink,function = "gpio i2s";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -355,6 +365,13 @@
	};
	};

	+ mdio_refclk_pins: mdio_refclk {
	+ mdio_refclk {
	+ ralink,group = "mdio";
	+ ralink,function = "refclk";
	+ };
	+ };
	+
	ephy_pins: ephy {
	ephy {
	ralink,group = "ephy";
	@@ -389,6 +406,13 @@
	ralink,function = "pcie rst";
	};
	};
	+
	+ pa_pins: pa {
	+ pa {
	+ ralink,group = "pa";
	+ ralink,function = "pa";
	+ };
	+ };
	};

	rstctrl: rstctrl {
	@@ -403,8 +427,9 @@

	usbphy: usbphy {
	compatible = "mediatek,mt7620-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";

	@@ -477,7 +502,7 @@
	interrupt-parent = <&intc>;
	interrupts = <18>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	status = "disabled";
	@@ -490,7 +515,7 @@
	interrupt-parent = <&intc>;
	interrupts = <18>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	status = "disabled";
	@@ -546,5 +571,3 @@
	ralink,eeprom = "soc_wmac.eeprom";
	};
	};
	-
	-#include "fbsd-mt7620a.dtsi"
	Index: sys/gnu/dts/mips/mt7620n.dtsi
	===================================================================
	--- sys/gnu/dts/mips/mt7620n.dtsi
	+++ sys/gnu/dts/mips/mt7620n.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -160,6 +160,22 @@
	status = "disabled";
	};

	+ i2c: i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x40>;
	@@ -228,6 +244,13 @@
	state_default: pinctrl0 {
	};

	+ ephy_pins: ephy {
	+ ephy {
	+ ralink,group = "ephy";
	+ ralink,function = "ephy";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -242,6 +265,13 @@
	};
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	uartlite_pins: uartlite {
	uart {
	ralink,group = "uartlite";
	@@ -262,8 +292,9 @@

	usbphy: usbphy {
	compatible = "mediatek,mt7620-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";

	@@ -292,6 +323,13 @@

	status = "disabled";
	};
	+
	+ port@4 {
	+ compatible = "mediatek,mt7620a-gsw-port", "mediatek,eth-port";
	+ reg = <4>;
	+
	+ status = "disabled";
	+ };
	};

	gsw: gsw@10110000 {
	@@ -303,7 +341,7 @@

	interrupt-parent = <&intc>;
	interrupts = <17>;
	- mediatek,port4 = "gmac";
	+ mediatek,port4 = "ephy";
	};

	ehci: ehci@101c0000 {
	@@ -313,7 +351,7 @@
	interrupt-parent = <&intc>;
	interrupts = <18>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	status = "disabled";
	@@ -323,7 +361,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	Index: sys/gnu/dts/mips/mt7621.dtsi
	===================================================================
	--- sys/gnu/dts/mips/mt7621.dtsi
	+++ sys/gnu/dts/mips/mt7621.dtsi
	@@ -3,7 +3,7 @@
	/ {
	#address-cells = <1>;
	#size-cells = <1>;
	- compatible = "mediatek,mtk7621-soc";
	+ compatible = "mediatek,mt7621-soc";

	cpus {
	cpu@0 {
	@@ -42,6 +42,8 @@
	clock-frequency = <50000000>;
	};

	+
	+
	palmbus: palmbus@1E000000 {
	compatible = "palmbus";
	reg = <0x1E000000 0x100000>;
	@@ -56,7 +58,7 @@
	};

	wdt: wdt@100 {
	- compatible = "mtk,mt7621-wdt";
	+ compatible = "mediatek,mt7621-wdt";
	reg = <0x100 0x100>;
	};

	@@ -89,6 +91,57 @@
	};
	};

	+ i2c: i2c@900 {
	+ compatible = "mediatek,mt7621-i2c";
	+ reg = <0x900 0x100>;
	+
	+ clocks = <&sysclock>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	+ i2s: i2s@a00 {
	+ compatible = "mediatek,mt7621-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ clocks = <&sysclock>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&gic>;
	+ interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>;
	+
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	+ dma-names = "tx", "rx";
	+
	+ status = "disabled";
	+ };
	+
	+ systick: systick@d00 {
	+ compatible = "ralink,mt7621-systick", "ralink,cevt-systick";
	+ reg = <0xd00 0x10>;
	+
	+ resets = <&rstctrl 28>;
	+ reset-names = "intc";
	+
	+ interrupt-parent = <&gic>;
	+ interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
	+ };
	+
	memc: memc@5000 {
	compatible = "mtk,mt7621-memc";
	reg = <0x300 0x100>;
	@@ -120,7 +173,7 @@
	};

	spi0: spi@b00 {
	- status = "okay";
	+ status = "disabled";

	compatible = "ralink,mt7621-spi";
	reg = <0xb00 0x100>;
	@@ -135,14 +188,40 @@

	pinctrl-names = "default";
	pinctrl-0 = <&spi_pins>;
	+ };

	- m25p80@0 {
	- #address-cells = <1>;
	- #size-cells = <1>;
	- reg = <0>;
	- spi-max-frequency = <10000000>;
	- m25p,chunked-io = <32>;
	- };
	+ gdma: gdma@2800 {
	+ compatible = "ralink,rt3883-gdma";
	+ reg = <0x2800 0x800>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&gic>;
	+ interrupts = <0 13 4>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <16>;
	+ #dma-requests = <16>;
	+
	+ status = "disabled";
	+ };
	+
	+ hsdma: hsdma@7000 {
	+ compatible = "mediatek,mt7621-hsdma";
	+ reg = <0x7000 0x1000>;
	+
	+ resets = <&rstctrl 5>;
	+ reset-names = "hsdma";
	+
	+ interrupt-parent = <&gic>;
	+ interrupts = <0 11 4>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <1>;
	+ #dma-requests = <1>;
	+
	+ status = "disabled";
	};
	};

	@@ -154,13 +233,6 @@
	state_default: pinctrl0 {
	};

	- spi_pins: spi {
	- spi {
	- ralink,group = "spi";
	- ralink,function = "spi";
	- };
	- };
	-
	i2c_pins: i2c {
	i2c {
	ralink,group = "i2c";
	@@ -168,6 +240,13 @@
	};
	};

	+ spi_pins: spi {
	+ spi {
	+ ralink,group = "spi";
	+ ralink,function = "spi";
	+ };
	+ };
	+
	uart1_pins: uart1 {
	uart1 {
	ralink,group = "uart1";
	@@ -248,6 +327,8 @@
	};

	sdhci: sdhci@1E130000 {
	+ status = "disabled";
	+
	compatible = "ralink,mt7620-sdhci";
	reg = <0x1E130000 0x4000>;

	@@ -261,6 +342,7 @@
	compatible = "mediatek,mt8173-xhci";
	reg = <0x1e1c0000 0x1000
	0x1e1d0700 0x0100>;
	+ reg-names = "mac", "ippc";

	clocks = <&sysclock>;
	clock-names = "sys_ck";
	@@ -296,6 +378,16 @@
	#size-cells = <1>;
	};

	+ hnat: hnat@1e100000 {
	+ compatible = "mediatek,mt7623-hnat";
	+ reg = <0x1e100000 0x10000>;
	+ mtketh-ppd = "eth0";
	+ mtketh-lan = "eth0";
	+ mtketh-wan = "eth0";
	+ resets = <&rstctrl 0>;
	+ reset-names = "mtketh";
	+ };
	+
	ethernet: ethernet@1e100000 {
	compatible = "mediatek,mt7621-eth";
	reg = <0x1e100000 0x10000>;
	@@ -353,7 +445,7 @@
	GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
	GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;

	- status = "okay";
	+ status = "disabled";

	resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
	reset-names = "pcie0", "pcie1", "pcie2";
	@@ -388,5 +480,3 @@
	};
	};
	};
	-
	-#include "fbsd-mt7621.dtsi"
	Index: sys/gnu/dts/mips/mt7628an.dtsi
	===================================================================
	--- sys/gnu/dts/mips/mt7628an.dtsi
	+++ sys/gnu/dts/mips/mt7628an.dtsi
	@@ -33,13 +33,13 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,mt7620a-sysc";
	+ compatible = "ralink,mt7620a-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	- watchdog: watchdog@120 {
	- compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
	- reg = <0x120 0x10>;
	+ watchdog: watchdog@100 {
	+ compatible = "ralink,mt7628an-wdt", "mediatek,mt7621-wdt";
	+ reg = <0x100 0x30>;

	resets = <&rstctrl 8>;
	reset-names = "wdt";
	@@ -110,7 +110,7 @@
	};

	i2c: i2c@900 {
	- compatible = "mediatek,mt7628-i2c";
	+ compatible = "mediatek,mt7621-i2c";
	reg = <0x900 0x100>;

	resets = <&rstctrl 16>;
	@@ -126,7 +126,7 @@
	};

	i2s: i2s@a00 {
	- compatible = "ralink,mt7620a-i2s";
	+ compatible = "mediatek,mt7628-i2s";
	reg = <0xa00 0x100>;

	resets = <&rstctrl 17>;
	@@ -135,8 +135,11 @@
	interrupt-parent = <&intc>;
	interrupts = <10>;

	- dmas = <&gdma 2>,
	- <&gdma 3>;
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	dma-names = "tx", "rx";

	status = "disabled";
	@@ -249,7 +252,7 @@
	};

	gdma: gdma@2800 {
	- compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
	+ compatible = "ralink,rt3883-gdma";
	reg = <0x2800 0x800>;

	resets = <&rstctrl 14>;
	@@ -295,6 +298,13 @@
	};
	};

	+ i2s_pins: i2s {
	+ i2s {
	+ ralink,group = "i2s";
	+ ralink,function = "i2s";
	+ };
	+ };
	+
	uart0_pins: uartlite {
	uartlite {
	ralink,group = "uart0";
	@@ -337,12 +347,19 @@
	};
	};

	- pcm_i2s_pins: i2s {
	- i2s {
	+ pcm_i2s_pins: pcm_i2s {
	+ pcm_i2s {
	ralink,group = "i2s";
	ralink,function = "pcm";
	};
	};
	+
	+ refclk_pins: refclk {
	+ refclk {
	+ ralink,group = "refclk";
	+ ralink,function = "refclk";
	+ };
	+ };
	};

	rstctrl: rstctrl {
	@@ -356,10 +373,11 @@
	};

	usbphy: usbphy@10120000 {
	- compatible = "ralink,mt7628an-usbphy", "mediatek,mt7620-usbphy";
	- reg = <0x10120000 0x4000>;
	- #phy-cells = <1>;
	+ compatible = "mediatek,mt7628-usbphy", "mediatek,mt7620-usbphy";
	+ reg = <0x10120000 0x1000>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	clocks = <&clkctrl 22 &clkctrl 25>;
	@@ -383,7 +401,7 @@
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -394,7 +412,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -471,8 +489,5 @@
	status = "disabled";

	mediatek,mtd-eeprom = <&factory 0x0000>;
	- mediatek,5ghz = <0>;
	};
	};
	-
	-#include "fbsd-mt7628an.dtsi"
	Index: sys/gnu/dts/mips/rt2880.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt2880.dtsi
	+++ sys/gnu/dts/mips/rt2880.dtsi
	@@ -5,7 +5,7 @@

	cpus {
	cpu@0 {
	- compatible = "mips,mips4KEc";
	+ compatible = "mips,mips24KEc";
	};
	};

	@@ -80,9 +80,6 @@
	ralink,register-map = [ 00 04 08 0c
	20 24 28 2c
	30 34 ];
	-
	- interrupt-parent = <&intc>;
	- interrupts = <7>;
	};

	gpio1: gpio@638 {
	@@ -117,6 +114,22 @@
	status = "disabled";
	};

	+ i2c: i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 9>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	uartlite: uartlite@c00 {
	compatible = "ralink,rt2880-uart", "ns16550a";
	reg = <0xc00 0x100>;
	@@ -141,6 +154,13 @@
	};
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -166,6 +186,14 @@
	#clock-cells = <1>;
	};

	+ pci: pci@440000 {
	+ compatible = "ralink,rt288x-pci";
	+ reg = <0x00440000 0x20000>;
	+ #address-cells = <1>;
	+ #size-cells = <1>;
	+ status = "disabled";
	+ };
	+
	ethernet: ethernet@400000 {
	compatible = "ralink,rt2880-eth";
	reg = <0x00400000 0x10000>;
	@@ -185,13 +213,13 @@
	compatible = "ralink,rt2880-port", "mediatek,eth-port";
	reg = <0>;
	};
	- };

	- mdio-bus {
	- compatible = "ralink,rt2880-mdio";
	- reg = <0x00400000 0x10000>;
	- #address-cells = <1>;
	- #size-cells = <0>;
	+ mdio-bus {
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+ };
	};

	wmac: wmac@480000 {
	Index: sys/gnu/dts/mips/rt3050.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt3050.dtsi
	+++ sys/gnu/dts/mips/rt3050.dtsi
	@@ -34,7 +34,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,rt3050-sysc";
	+ compatible = "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -149,6 +149,57 @@
	status = "disabled";
	};

	+ gdma: gdma@700 {
	+ compatible = "ralink,rt305x-gdma";
	+ reg = <0x700 0x100>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <7>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <8>;
	+ #dma-requests = <8>;
	+
	+ status = "disabled";
	+ };
	+
	+ i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	+ i2s@a00 {
	+ compatible = "ralink,rt3050-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <10>;
	+
	+ txdma-req = <2>;
	+
	+ dmas = <&gdma 4>;
	+ dma-names = "tx";
	+
	+ status = "disabled";
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x100>;
	@@ -195,6 +246,13 @@
	};
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -202,6 +260,13 @@
	};
	};

	+ rgmii_pins: rgmii {
	+ rgmii {
	+ ralink,group = "rgmii";
	+ ralink,function = "rgmii";
	+ };
	+ };
	+
	uartlite_pins: uartlite {
	uart {
	ralink,group = "uartlite";
	@@ -222,6 +287,9 @@

	usbphy: usbphy {
	compatible = "ralink,rt3050-usbphy";
	+ #phy-cells = <0>;
	+
	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22>;
	reset-names = "host";
	clocks = <&clkctrl 18>;
	Index: sys/gnu/dts/mips/rt3352.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt3352.dtsi
	+++ sys/gnu/dts/mips/rt3352.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -146,6 +146,42 @@
	status = "disabled";
	};

	+ i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	+ i2s@a00 {
	+ compatible = "ralink,rt3352-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <10>;
	+
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	+ dma-names = "tx", "rx";
	+
	+ status = "disabled";
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,rt3352-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x40>;
	@@ -191,6 +227,23 @@
	pinctrl-names = "default";
	pinctrl-0 = <&uartlite_pins>;
	};
	+
	+ gdma: gdma@2800 {
	+ compatible = "ralink,rt3883-gdma";
	+ reg = <0x2800 0x800>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <7>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <16>;
	+ #dma-requests = <16>;
	+
	+ status = "disabled";
	+ };
	};

	pinctrl: pinctrl {
	@@ -202,6 +255,27 @@
	state_default: pinctrl0 {
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	+ mdio_pins: mdio {
	+ mdio {
	+ ralink,group = "mdio";
	+ ralink,function = "mdio";
	+ };
	+ };
	+
	+ rgmii_pins: rgmii {
	+ rgmii {
	+ ralink,group = "rgmii";
	+ ralink,function = "rgmii";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -260,8 +334,9 @@

	usbphy: usbphy {
	compatible = "ralink,rt3352-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	clocks = <&clkctrl 18 &clkctrl 20>;
	@@ -282,7 +357,7 @@
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -295,7 +370,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	Index: sys/gnu/dts/mips/rt3883.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt3883.dtsi
	+++ sys/gnu/dts/mips/rt3883.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -166,6 +166,42 @@
	status = "disabled";
	};

	+ i2c@900 {
	+ compatible = "ralink,rt2880-i2c";
	+ reg = <0x900 0x100>;
	+
	+ resets = <&rstctrl 16>;
	+ reset-names = "i2c";
	+
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	+
	+ status = "disabled";
	+
	+ pinctrl-names = "default";
	+ pinctrl-0 = <&i2c_pins>;
	+ };
	+
	+ i2s@a00 {
	+ compatible = "ralink,rt3883-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <10>;
	+
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	+ dma-names = "tx", "rx";
	+
	+ status = "disabled";
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x40>;
	@@ -211,6 +247,23 @@
	pinctrl-names = "default";
	pinctrl-0 = <&uartlite_pins>;
	};
	+
	+ gdma: gdma@2800 {
	+ compatible = "ralink,rt3883-gdma";
	+ reg = <0x2800 0x800>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <7>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <16>;
	+ #dma-requests = <16>;
	+
	+ status = "disabled";
	+ };
	};

	pinctrl: pinctrl {
	@@ -222,6 +275,13 @@
	state_default: pinctrl0 {
	};

	+ i2c_pins: i2c {
	+ i2c {
	+ ralink,group = "i2c";
	+ ralink,function = "i2c";
	+ };
	+ };
	+
	spi_pins: spi {
	spi {
	ralink,group = "spi";
	@@ -246,6 +306,8 @@

	ethernet: ethernet@10100000 {
	compatible = "ralink,rt3883-eth";
	+ #address-cells = <1>;
	+ #size-cells = <0>;
	reg = <0x10100000 0x10000>;

	resets = <&rstctrl 21>;
	@@ -365,8 +427,9 @@

	usbphy: usbphy {
	compatible = "ralink,rt3352-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	clocks = <&clkctrl 22 &clkctrl 25>;
	@@ -387,7 +450,7 @@
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -400,7 +463,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -409,5 +472,3 @@
	status = "disabled";
	};
	};
	-
	-#include "fbsd-rt3883.dtsi"
	Index: sys/gnu/dts/mips/rt5350.dtsi
	===================================================================
	--- sys/gnu/dts/mips/rt5350.dtsi
	+++ sys/gnu/dts/mips/rt5350.dtsi
	@@ -35,7 +35,7 @@
	#size-cells = <1>;

	sysc: sysc@0 {
	- compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
	+ compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc", "syscon";
	reg = <0x0 0x100>;
	};

	@@ -138,7 +138,7 @@
	};

	i2c: i2c@900 {
	- compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
	+ compatible = "ralink,rt2880-i2c";
	reg = <0x900 0x100>;

	resets = <&rstctrl 16>;
	@@ -153,6 +153,26 @@
	status = "disabled";
	};

	+ i2s: i2s@a00 {
	+ compatible = "ralink,rt3352-i2s";
	+ reg = <0xa00 0x100>;
	+
	+ resets = <&rstctrl 17>;
	+ reset-names = "i2s";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <10>;
	+
	+ txdma-req = <2>;
	+ rxdma-req = <3>;
	+
	+ dmas = <&gdma 4>,
	+ <&gdma 6>;
	+ dma-names = "tx", "rx";
	+
	+ status = "disabled";
	+ };
	+
	spi0: spi@b00 {
	compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
	reg = <0xb00 0x40>;
	@@ -208,6 +228,36 @@
	interrupt-parent = <&cpuintc>;
	interrupts = <7>;
	};
	+
	+ pcm: pcm@2000 {
	+ compatible = "ralink,rt5350-pcm";
	+ reg = <0x2000 0x800>;
	+
	+ resets = <&rstctrl 11>;
	+ reset-names = "pcm";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <4>;
	+
	+ status = "disabled";
	+ };
	+
	+ gdma: gdma@2800 {
	+ compatible = "ralink,rt3883-gdma";
	+ reg = <0x2800 0x800>;
	+
	+ resets = <&rstctrl 14>;
	+ reset-names = "dma";
	+
	+ interrupt-parent = <&intc>;
	+ interrupts = <7>;
	+
	+ #dma-cells = <1>;
	+ #dma-channels = <16>;
	+ #dma-requests = <16>;
	+
	+ status = "disabled";
	+ };
	};

	pinctrl: pinctrl {
	@@ -219,13 +269,6 @@
	state_default: pinctrl0 {
	};

	- spi_pins: spi {
	- spi {
	- ralink,group = "spi";
	- ralink,function = "spi";
	- };
	- };
	-
	i2c_pins: i2c {
	i2c {
	ralink,group = "i2c";
	@@ -233,6 +276,13 @@
	};
	};

	+ spi_pins: spi {
	+ spi {
	+ ralink,group = "spi";
	+ ralink,function = "spi";
	+ };
	+ };
	+
	phy_led_pins: phy_led {
	phy_led {
	ralink,group = "led";
	@@ -274,8 +324,9 @@

	usbphy: usbphy {
	compatible = "ralink,rt3352-usbphy";
	- #phy-cells = <1>;
	+ #phy-cells = <0>;

	+ ralink,sysctl = <&sysc>;
	resets = <&rstctrl 22 &rstctrl 25>;
	reset-names = "host", "device";
	clocks = <&clkctrl 18>;
	@@ -320,7 +371,7 @@
	compatible = "generic-ehci";
	reg = <0x101c0000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;
	@@ -331,7 +382,7 @@
	compatible = "generic-ohci";
	reg = <0x101c1000 0x1000>;

	- phys = <&usbphy 1>;
	+ phys = <&usbphy>;
	phy-names = "usb";

	interrupt-parent = <&intc>;

File Metadata

Mime Type: text/plain
Expires: Tue, Apr 7, 6:12 AM (21 h, 55 m)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 31014835
Default Alt Text: D17955.id50296.diff (534 KB)

D17955.id50296.diffNo OneTemporaryActions

D17955.id50296.diffView Options

File Metadata

Event Timeline

D17955.id50296.diff
No OneTemporary
Actions

D17955.id50296.diff
View Options