Page MenuHomeFreeBSD
Files F150117156

D55183.diff
No OneTemporary
Actions

D55183.diff
View Options

diff --git a/tests/ci/tools/ci.conf b/tests/ci/tools/ci.conf
--- a/tests/ci/tools/ci.conf
+++ b/tests/ci/tools/ci.conf
@@ -74,6 +74,7 @@
kld_list="\${kld_list} if_bridge" # sys/net/if_bridge_test
kld_list="\${kld_list} if_enc" # sys/netpfil/pf
kld_list="\${kld_list} if_epair" # sys/net/if_epair_test
+kld_list="\${kld_list} if_geneve" # sys/net/if_geneve
kld_list="\${kld_list} if_ovpn" # sys/net/if_ovpn
kld_list="\${kld_list} if_stf" # sys/net/if_stf
kld_list="\${kld_list} ipdivert" # sys/netinet (loads ipdivert)
diff --git a/tests/sys/net/Makefile b/tests/sys/net/Makefile
--- a/tests/sys/net/Makefile
+++ b/tests/sys/net/Makefile
@@ -15,6 +15,7 @@
ATF_TESTS_SH+= if_tun_test
ATF_TESTS_SH+= if_vlan
ATF_TESTS_SH+= if_wg
+ATF_TESTS_SH+= if_geneve
TESTS_SUBDIRS+= bpf
TESTS_SUBDIRS+= if_ovpn
diff --git a/tests/sys/net/if_geneve.sh b/tests/sys/net/if_geneve.sh
new file mode 100644
--- /dev/null
+++ b/tests/sys/net/if_geneve.sh
@@ -0,0 +1,1000 @@
+#
+# SPDX-License-Identifier: BSD-2-Clause
+#
+# Copyright (c) 2025 Seyed Pouria Mousavizadeh Tehrani <info@spmzt.net>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+
+. $(atf_get_srcdir)/../common/vnet.subr
+
+atf_test_case "ether_ipv4" "cleanup"
+ether_ipv4_head()
+{
+ atf_set descr 'Create a geneve(4) l2 tunnel over an ipv4 underlay using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+ether_ipv4_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=192.168.2.1
+ endpoint2=192.168.2.2
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet ${endpoint1}/24 up
+ ifconfig -j genevetest2 ${epair}b inet ${endpoint2}/24 up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l2 debug \
+ geneveid $vni1 geneveremote ${endpoint2} genevelocal ${endpoint1} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l2 debug \
+ geneveid $vni1 geneveremote ${endpoint1} genevelocal ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+}
+
+ether_ipv4_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "ether_ipv6" "cleanup"
+ether_ipv6_head()
+{
+ atf_set descr 'Create a geneve(4) l2 tunnel over an ipv6 underlay using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+ether_ipv6_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=3fff::1
+ endpoint2=3fff::2
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet6 ${endpoint1} up
+ ifconfig -j genevetest2 ${epair}b inet6 ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l2 debug \
+ geneveid $vni1 geneveremote ${endpoint2} genevelocal ${endpoint1} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l2 debug \
+ geneveid $vni1 geneveremote ${endpoint1} genevelocal ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+}
+
+ether_ipv6_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "inherit_ipv4" "cleanup"
+inherit_ipv4_head()
+{
+ atf_set descr 'Create a geneve(4) l3 tunnel over an ipv4 underlay using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+inherit_ipv4_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=192.168.2.1
+ endpoint2=192.168.2.2
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=2
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet ${endpoint1}/24 up
+ ifconfig -j genevetest2 ${epair}b inet ${endpoint2}/24 up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l3 debug \
+ geneveid $vni1 geneveremote ${endpoint2} genevelocal ${endpoint1} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l3 debug \
+ geneveid $vni1 geneveremote ${endpoint1} genevelocal ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+}
+
+inherit_ipv4_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "inherit_ipv6" "cleanup"
+inherit_ipv6_head()
+{
+ atf_set descr 'Create a geneve(4) l3 tunnel over an ipv6 underlay using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+inherit_ipv6_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=3fff::1
+ endpoint2=3fff::2
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet6 ${endpoint1} up
+ ifconfig -j genevetest2 ${epair}b inet6 ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l3 debug \
+ geneveid $vni1 geneveremote ${endpoint2} genevelocal ${endpoint1} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l3 debug \
+ geneveid $vni1 geneveremote ${endpoint1} genevelocal ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+}
+
+inherit_ipv6_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "ether_ipv6_blind_options" "cleanup"
+ether_ipv6_blind_options_head()
+{
+ atf_set descr 'Create a geneve(4) l2 ipv6 tunnel and test geneve options'
+ atf_set require.user root
+}
+
+ether_ipv6_blind_options_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2
+ local v6tunnel1 v6tunnel2
+
+ endpoint1=3fff::1
+ endpoint2=3fff::2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet6 ${endpoint1} up
+ ifconfig -j genevetest2 ${epair}b inet6 ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l2 debug \
+ geneveid $vni1 geneveremote ${endpoint2} genevelocal ${endpoint1} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l2 debug \
+ geneveid $vni1 geneveremote ${endpoint1} genevelocal ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 genevemaxaddr 1000
+ atf_check -s exit:0 -o match:"max: 1000" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 genevetimeout 1000
+ atf_check -s exit:0 -o match:"timeout: 1000" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 -genevelearn
+ atf_check -s exit:0 -o match:"mode: nolearning" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 genevelearn
+ atf_check -s exit:0 -o match:" learning" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o match:"count: 1" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 geneveflush
+ atf_check -s exit:0 -o match:"count: 0" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 geneveflushall
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 genevettl inherit
+ atf_check -s exit:0 -o match:"ttl: inherit" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 genevettl 1
+ atf_check -s exit:0 -o match:"ttl: 1" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 down genevedf set up
+ atf_check -s exit:0 -o match:"df: set" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 down genevedf inherit up
+ atf_check -s exit:0 -o match:"df: inherit" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 down genevedf unset up
+ atf_check -s exit:0 -o match:"df: unset" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 genevedscpinherit
+ atf_check -s exit:0 -o match:"dscp: inherit" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 -genevedscpinherit
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 geneveexternal
+ atf_check -s exit:0 -o match:" external" ifconfig -j genevetest1 -v geneve1
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 -geneveexternal
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 down geneveportrange 11000 62000 up
+ atf_check -s exit:0 -o match:"portrange: 11000-62000" ifconfig -j genevetest1 -v geneve1
+
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+}
+
+ether_ipv6_blind_options_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "ether_ipv6_external" "cleanup"
+ether_ipv6_external_head()
+{
+ atf_set descr 'Create a geneve(4) l2 ipv6 tunnel and test geneve collect metadata'
+ atf_set require.user root
+}
+
+ether_ipv6_external_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2
+ local v6tunnel1 v6tunnel2
+
+ endpoint1=3fff::1
+ endpoint2=3fff::2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet6 ${endpoint1} up
+ ifconfig -j genevetest2 ${epair}b inet6 ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l2 debug \
+ geneveid $vni1 geneveremote ${endpoint2} genevelocal ${endpoint1} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l2 debug \
+ geneveid $vni1 geneveremote ${endpoint1} genevelocal ${endpoint2} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 geneveexternal
+ atf_check -s exit:16 -e ignore ifconfig -j genevetest1 geneve1 down geneveid 10 up
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 -geneveexternal
+ atf_check -s exit:0 -o ignore ifconfig -j genevetest1 geneve1 down geneveid 10 up
+
+}
+
+ether_ipv6_external_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "ether_ipv4_multicast" "cleanup"
+ether_ipv4_multicast_head()
+{
+ atf_set descr 'Create a geneve(4) l2 ipv4 multicast tunnel using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+ether_ipv4_multicast_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2 mc_group
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=192.168.2.1
+ endpoint2=192.168.2.2
+ mc_group=239.0.0.1
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+ if ! kldstat -q -m ip_mroute; then
+ atf_skip "This test requires ip_mroute"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet ${endpoint1}/24 up
+ ifconfig -j genevetest2 ${epair}b inet ${endpoint2}/24 up
+
+ # manually add the multicast routes to epairs
+ route -j genevetest1 add -net 239.0.0.0/8 -interface ${epair}a
+ route -j genevetest2 add -net 239.0.0.0/8 -interface ${epair}b
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l2 debug \
+ geneveid $vni1 genevelocal ${endpoint1} \
+ genevegroup ${mc_group} genevedev ${epair}a up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l2 debug \
+ geneveid $vni1 genevelocal ${endpoint2} \
+ genevegroup ${mc_group} genevedev ${epair}b up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o match:"group 239.0.0.1" jexec genevetest1 ifmcstat -i ${epair}a -f inet
+ atf_check -s exit:0 -o match:"group 239.0.0.1" jexec genevetest2 ifmcstat -i ${epair}b -f inet
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+
+}
+
+ether_ipv4_multicast_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "ether_ipv6_multicast" "cleanup"
+ether_ipv6_multicast_head()
+{
+ atf_set descr 'Create a geneve(4) l2 ipv6 multicast tunnel using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+ether_ipv6_multicast_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2 mc_group
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=3fff::1
+ endpoint2=3fff::2
+ mc_group=ff08::db8:0:1
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+ if ! kldstat -q -m ip6_mroute; then
+ atf_skip "This test requires ip6_mroute"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet6 ${endpoint1} up
+ ifconfig -j genevetest2 ${epair}b inet6 ${endpoint2} up
+
+ # manually add the multicast routes to epairs
+ route -j genevetest1 -n6 add -net ff08::db8:0:1/96 -interface ${epair}a
+ route -j genevetest2 -n6 add -net ff08::db8:0:1/96 -interface ${epair}b
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l2 debug \
+ geneveid $vni1 genevelocal ${endpoint1} \
+ genevegroup ${mc_group} genevedev ${epair}a up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l2 debug \
+ geneveid $vni1 genevelocal ${endpoint2} \
+ genevegroup ${mc_group} genevedev ${epair}b up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+
+}
+
+ether_ipv6_multicast_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "ether_ipv4_multicast_without_dev" "cleanup"
+ether_ipv4_multicast_without_dev_head()
+{
+ atf_set descr 'Create a geneve(4) l2 ipv4 multicast tunnel without specifying genevedev using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+ether_ipv4_multicast_without_dev_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2 mc_group
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=192.168.2.1
+ endpoint2=192.168.2.2
+ mc_group=239.0.0.1
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+ if ! kldstat -q -m ip_mroute; then
+ atf_skip "This test requires ip_mroute"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet ${endpoint1}/24 up
+ ifconfig -j genevetest2 ${epair}b inet ${endpoint2}/24 up
+
+ # manually add the multicast routes to epairs
+ route -j genevetest1 add -net 239.0.0.0/8 -interface ${epair}a
+ route -j genevetest2 add -net 239.0.0.0/8 -interface ${epair}b
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l2 debug \
+ geneveid $vni1 genevelocal ${endpoint1} genevegroup ${mc_group} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l2 debug \
+ geneveid $vni1 genevelocal ${endpoint2} genevegroup ${mc_group} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o match:"group 239.0.0.1" jexec genevetest1 ifmcstat -i ${epair}a -f inet
+ atf_check -s exit:0 -o match:"group 239.0.0.1" jexec genevetest2 ifmcstat -i ${epair}b -f inet
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+
+}
+
+ether_ipv4_multicast_without_dev_cleanup()
+{
+ vnet_cleanup
+}
+
+
+atf_test_case "ether_ipv6_multicast_without_dev" "cleanup"
+ether_ipv6_multicast_without_dev_head()
+{
+ atf_set descr 'Create a geneve(4) l2 ipv6 multicast tunnel without specifying genevedev using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+ether_ipv6_multicast_without_dev_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2 mc_group
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=3fff::1
+ endpoint2=3fff::2
+ mc_group=ff08::db8:0:1
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+ if ! kldstat -q -m ip6_mroute; then
+ atf_skip "This test requires ip6_mroute"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet6 ${endpoint1} up
+ ifconfig -j genevetest2 ${epair}b inet6 ${endpoint2} up
+
+ # manually add the multicast routes to epairs
+ route -j genevetest1 -n6 add -net ff08::db8:0:1/96 -interface ${epair}a
+ route -j genevetest2 -n6 add -net ff08::db8:0:1/96 -interface ${epair}b
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l2 debug \
+ geneveid $vni1 genevelocal ${endpoint1} genevegroup ${mc_group} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l2 debug \
+ geneveid $vni1 genevelocal ${endpoint2} genevegroup ${mc_group} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/24
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+
+}
+
+ether_ipv6_multicast_without_dev_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "inherit_ipv4_multicast" "cleanup"
+inherit_ipv4_multicast_head()
+{
+ atf_set descr 'Create a geneve(4) l3 ipv4 multicast tunnel using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+inherit_ipv4_multicast_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2 mc_group
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=192.168.2.1
+ endpoint2=192.168.2.2
+ mc_group=239.0.0.1
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+ if ! kldstat -q -m ip_mroute; then
+ atf_skip "This test requires ip_mroute"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet ${endpoint1}/24 up
+ ifconfig -j genevetest2 ${epair}b inet ${endpoint2}/24 up
+
+ # manually add the multicast routes to epairs
+ route -j genevetest1 add -net 239.0.0.0/8 -interface ${epair}a
+ route -j genevetest2 add -net 239.0.0.0/8 -interface ${epair}b
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l3 debug \
+ geneveid $vni1 genevelocal ${endpoint1} \
+ genevegroup ${mc_group} genevedev ${epair}a up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l3 debug \
+ geneveid $vni1 genevelocal ${endpoint2} \
+ genevegroup ${mc_group} genevedev ${epair}b up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/30
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/30
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore sysctl -j genevetest1 net.inet.icmp.bmcastecho=1
+ atf_check -s exit:0 -o ignore sysctl -j genevetest2 net.inet.icmp.bmcastecho=1
+
+ atf_check -s exit:0 -o match:"group 239.0.0.1" jexec genevetest1 ifmcstat -i ${epair}a -f inet
+ atf_check -s exit:0 -o match:"group 239.0.0.1" jexec genevetest2 ifmcstat -i ${epair}b -f inet
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+
+}
+
+inherit_ipv4_multicast_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "inherit_ipv6_multicast" "cleanup"
+inherit_ipv6_multicast_head()
+{
+ atf_set descr 'Create a geneve(4) l3 ipv6 multicast tunnel using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+inherit_ipv6_multicast_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2 mc_group
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=3fff::1
+ endpoint2=3fff::2
+ mc_group=ff08::db8:0:1
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+ if ! kldstat -q -m ip6_mroute; then
+ atf_skip "This test requires ip6_mroute"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet6 ${endpoint1} up
+ ifconfig -j genevetest2 ${epair}b inet6 ${endpoint2} up
+
+ # manually add the multicast routes to epairs
+ route -j genevetest1 -n6 add -net ff08::db8:0:1/96 -interface ${epair}a
+ route -j genevetest2 -n6 add -net ff08::db8:0:1/96 -interface ${epair}b
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l3 debug \
+ geneveid $vni1 genevelocal ${endpoint1} \
+ genevegroup ${mc_group} genevedev ${epair}a up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l3 debug \
+ geneveid $vni1 genevelocal ${endpoint2} \
+ genevegroup ${mc_group} genevedev ${epair}b up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/30
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/30
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore sysctl -j genevetest1 net.inet.icmp.bmcastecho=1
+ atf_check -s exit:0 -o ignore sysctl -j genevetest2 net.inet.icmp.bmcastecho=1
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+
+}
+
+inherit_ipv6_multicast_cleanup()
+{
+ vnet_cleanup
+}
+
+atf_test_case "inherit_ipv4_multicast_without_dev" "cleanup"
+inherit_ipv4_multicast_without_dev_head()
+{
+ atf_set descr 'Create a geneve(4) l3 ipv4 multicast tunnel without specifying genevedev using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+inherit_ipv4_multicast_without_dev_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2 mc_group
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=192.168.2.1
+ endpoint2=192.168.2.2
+ mc_group=239.0.0.1
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+ if ! kldstat -q -m ip_mroute; then
+ atf_skip "This test requires ip_mroute"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet ${endpoint1}/24 up
+ ifconfig -j genevetest2 ${epair}b inet ${endpoint2}/24 up
+
+ # manually add the multicast routes to epairs
+ route -j genevetest1 add -net 239.0.0.0/8 -interface ${epair}a
+ route -j genevetest2 add -net 239.0.0.0/8 -interface ${epair}b
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l3 debug \
+ geneveid $vni1 genevelocal ${endpoint1} genevegroup ${mc_group} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l3 debug \
+ geneveid $vni1 genevelocal ${endpoint2} genevegroup ${mc_group} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/30
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/30
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore sysctl -j genevetest1 net.inet.icmp.bmcastecho=1
+ atf_check -s exit:0 -o ignore sysctl -j genevetest2 net.inet.icmp.bmcastecho=1
+
+ atf_check -s exit:0 -o match:"group 239.0.0.1" jexec genevetest1 ifmcstat -i ${epair}a -f inet
+ atf_check -s exit:0 -o match:"group 239.0.0.1" jexec genevetest2 ifmcstat -i ${epair}b -f inet
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+
+}
+
+inherit_ipv4_multicast_without_dev_cleanup()
+{
+ vnet_cleanup
+}
+
+
+atf_test_case "inherit_ipv6_multicast_without_dev" "cleanup"
+inherit_ipv6_multicast_without_dev_head()
+{
+ atf_set descr 'Create a geneve(4) l3 ipv6 multicast tunnel without specifying genevedev using epair and pass traffic between jails'
+ atf_set require.user root
+}
+
+inherit_ipv6_multicast_without_dev_body()
+{
+ local epair geneve1 geneve2 vni1 endpoint1 endpoint2 mc_group
+ local v4tunnel1 v4tunnel2 v6tunnel1 v6tunnel2
+
+ endpoint1=3fff::1
+ endpoint2=3fff::2
+ mc_group=ff08::db8:0:1
+ v4tunnel1=169.254.0.1
+ v4tunnel2=169.254.0.2
+ v6tunnel1=2001:db8::1
+ v6tunnel2=2001:db8::2
+ vni1=1
+
+ if ! kldstat -q -m if_geneve; then
+ atf_skip "This test requires if_geneve"
+ fi
+ if ! kldstat -q -m ip6_mroute; then
+ atf_skip "This test requires ip6_mroute"
+ fi
+
+ vnet_init
+ epair=$(vnet_mkepair)
+ vnet_mkjail genevetest1 ${epair}a
+ vnet_mkjail genevetest2 ${epair}b
+
+ ifconfig -j genevetest1 ${epair}a inet6 ${endpoint1} up
+ ifconfig -j genevetest2 ${epair}b inet6 ${endpoint2} up
+
+ # manually add the multicast routes to epairs
+ route -j genevetest1 -n6 add -net ff08::db8:0:1/96 -interface ${epair}a
+ route -j genevetest2 -n6 add -net ff08::db8:0:1/96 -interface ${epair}b
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 create genevemode l3 debug \
+ geneveid $vni1 genevelocal ${endpoint1} genevegroup ${mc_group} up
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 create genevemode l3 debug \
+ geneveid $vni1 genevelocal ${endpoint2} genevegroup ${mc_group} up
+
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet ${v4tunnel1}/30
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest1 geneve1 inet6 ${v6tunnel1}
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet ${v4tunnel2}/30
+ atf_check -s exit:0 -o ignore \
+ ifconfig -j genevetest2 geneve1 inet6 ${v6tunnel2}
+
+ atf_check -s exit:0 -o ignore sysctl -j genevetest1 net.inet.icmp.bmcastecho=1
+ atf_check -s exit:0 -o ignore sysctl -j genevetest2 net.inet.icmp.bmcastecho=1
+
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v6tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v6tunnel1
+ atf_check -s exit:0 -o ignore jexec genevetest1 ping -nc 1 -t 1 $v4tunnel2
+ atf_check -s exit:0 -o ignore jexec genevetest2 ping -nc 1 -t 1 $v4tunnel1
+
+}
+
+inherit_ipv6_multicast_without_dev_cleanup()
+{
+ vnet_cleanup
+}
+
+
+atf_init_test_cases()
+{
+ atf_add_test_case "ether_ipv4"
+ atf_add_test_case "ether_ipv4_multicast"
+ atf_add_test_case "ether_ipv4_multicast_without_dev"
+ atf_add_test_case "ether_ipv6"
+ atf_add_test_case "ether_ipv6_blind_options"
+ atf_add_test_case "ether_ipv6_external"
+ atf_add_test_case "ether_ipv6_multicast"
+ atf_add_test_case "ether_ipv6_multicast_without_dev"
+ atf_add_test_case "inherit_ipv4"
+ atf_add_test_case "inherit_ipv4_multicast"
+ atf_add_test_case "inherit_ipv4_multicast_without_dev"
+ atf_add_test_case "inherit_ipv6"
+ atf_add_test_case "inherit_ipv6_multicast"
+ atf_add_test_case "inherit_ipv6_multicast_without_dev"
+}

File Metadata

Mime Type
text/plain
Expires
Mon, Mar 30, 12:49 PM (12 h, 1 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
30587382
Default Alt Text
D55183.diff (35 KB)

Event Timeline