Page MenuHomeFreeBSD
Files F149069266

D3580.diff
No OneTemporary
Actions

D3580.diff
View Options

Index: head/usr.sbin/sesutil/Makefile
===================================================================
--- head/usr.sbin/sesutil/Makefile
+++ head/usr.sbin/sesutil/Makefile
@@ -1,6 +1,7 @@
# $FreeBSD$
PROG= sesutil
+SRCS= sesutil.c eltsub.c
MAN= sesutil.8
.include <bsd.prog.mk>
Index: head/usr.sbin/sesutil/eltsub.h
===================================================================
--- head/usr.sbin/sesutil/eltsub.h
+++ head/usr.sbin/sesutil/eltsub.h
@@ -0,0 +1,36 @@
+/* $FreeBSD$ */
+/*
+ * Copyright (c) 2000 by Matthew Jacob
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification, immediately at the beginning of the file.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * the GNU Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Matthew Jacob
+ * Feral Software
+ * mjacob@feral.com
+ */
+
+char * geteltnm(int);
+char * stat2ascii(int, u_char *);
Index: head/usr.sbin/sesutil/eltsub.c
===================================================================
--- head/usr.sbin/sesutil/eltsub.c
+++ head/usr.sbin/sesutil/eltsub.c
@@ -0,0 +1,194 @@
+/* $FreeBSD$ */
+/*
+ * Copyright (c) 2000 by Matthew Jacob
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification, immediately at the beginning of the file.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * the GNU Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Matthew Jacob
+ * Feral Software
+ * mjacob@feral.com
+ */
+
+#include <unistd.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/ioctl.h>
+#include <cam/scsi/scsi_all.h>
+#include <cam/scsi/scsi_enc.h>
+
+#include "eltsub.h"
+
+char *
+geteltnm(int type)
+{
+ static char rbuf[132];
+
+ switch (type) {
+ case ELMTYP_UNSPECIFIED:
+ sprintf(rbuf, "Unspecified");
+ break;
+ case ELMTYP_DEVICE:
+ sprintf(rbuf, "Device Slot");
+ break;
+ case ELMTYP_POWER:
+ sprintf(rbuf, "Power Supply");
+ break;
+ case ELMTYP_FAN:
+ sprintf(rbuf, "Cooling");
+ break;
+ case ELMTYP_THERM:
+ sprintf(rbuf, "Temperature Sensors");
+ break;
+ case ELMTYP_DOORLOCK:
+ sprintf(rbuf, "Door Lock");
+ break;
+ case ELMTYP_ALARM:
+ sprintf(rbuf, "Audible alarm");
+ break;
+ case ELMTYP_ESCC:
+ sprintf(rbuf, "Enclosure Services Controller Electronics");
+ break;
+ case ELMTYP_SCC:
+ sprintf(rbuf, "SCC Controller Electronics");
+ break;
+ case ELMTYP_NVRAM:
+ sprintf(rbuf, "Nonvolatile Cache");
+ break;
+ case ELMTYP_INV_OP_REASON:
+ sprintf(rbuf, "Invalid Operation Reason");
+ break;
+ case ELMTYP_UPS:
+ sprintf(rbuf, "Uninterruptible Power Supply");
+ break;
+ case ELMTYP_DISPLAY:
+ sprintf(rbuf, "Display");
+ break;
+ case ELMTYP_KEYPAD:
+ sprintf(rbuf, "Key Pad Entry");
+ break;
+ case ELMTYP_ENCLOSURE:
+ sprintf(rbuf, "Enclosure");
+ break;
+ case ELMTYP_SCSIXVR:
+ sprintf(rbuf, "SCSI Port/Transceiver");
+ break;
+ case ELMTYP_LANGUAGE:
+ sprintf(rbuf, "Language");
+ break;
+ case ELMTYP_COMPORT:
+ sprintf(rbuf, "Communication Port");
+ break;
+ case ELMTYP_VOM:
+ sprintf(rbuf, "Voltage Sensor");
+ break;
+ case ELMTYP_AMMETER:
+ sprintf(rbuf, "Current Sensor");
+ break;
+ case ELMTYP_SCSI_TGT:
+ sprintf(rbuf, "SCSI Target Port");
+ break;
+ case ELMTYP_SCSI_INI:
+ sprintf(rbuf, "SCSI Initiator Port");
+ break;
+ case ELMTYP_SUBENC:
+ sprintf(rbuf, "Simple Subenclosure");
+ break;
+ case ELMTYP_ARRAY_DEV:
+ sprintf(rbuf, "Array Device Slot");
+ break;
+ case ELMTYP_SAS_EXP:
+ sprintf(rbuf, "SAS Expander");
+ break;
+ case ELMTYP_SAS_CONN:
+ sprintf(rbuf, "SAS Connector");
+ break;
+ default:
+ (void) sprintf(rbuf, "<Type 0x%x>", type);
+ break;
+ }
+ return (rbuf);
+}
+
+static char *
+scode2ascii(u_char code)
+{
+ static char rbuf[32];
+ switch (code & 0xf) {
+ case SES_OBJSTAT_UNSUPPORTED:
+ sprintf(rbuf, "Unsupported");
+ break;
+ case SES_OBJSTAT_OK:
+ sprintf(rbuf, "OK");
+ break;
+ case SES_OBJSTAT_CRIT:
+ sprintf(rbuf, "Critical");
+ break;
+ case SES_OBJSTAT_NONCRIT:
+ sprintf(rbuf, "Noncritical");
+ break;
+ case SES_OBJSTAT_UNRECOV:
+ sprintf(rbuf, "Unrecoverable");
+ break;
+ case SES_OBJSTAT_NOTINSTALLED:
+ sprintf(rbuf, "Not Installed");
+ break;
+ case SES_OBJSTAT_UNKNOWN:
+ sprintf(rbuf, "Unknown");
+ break;
+ case SES_OBJSTAT_NOTAVAIL:
+ sprintf(rbuf, "Not Available");
+ break;
+ case SES_OBJSTAT_NOACCESS:
+ sprintf(rbuf, "No Access Allowed");
+ break;
+ default:
+ sprintf(rbuf, "<Status 0x%x>", code & 0xf);
+ break;
+ }
+ return (rbuf);
+}
+
+
+char *
+stat2ascii(int eletype, u_char *cstat)
+{
+ static char ebuf[256], *scode;
+
+ scode = scode2ascii(cstat[0]);
+ sprintf(ebuf, "%s%s%s%s%s%s (0x%02x 0x%02x 0x%02x 0x%02x)",
+ scode,
+ (cstat[0] & 0x40) ? ", Prd.Fail" : "",
+ (cstat[0] & 0x20) ? ", Disabled" : "",
+ (cstat[0] & 0x10) ? ", Swapped" : "",
+ (eletype == ELMTYP_DEVICE && (cstat[2] & 0x02)) ?
+ ", LED=Locate" : "",
+ (eletype == ELMTYP_DEVICE && (cstat[3] & 0x20)) ?
+ ", LED=Fault" : "",
+ cstat[0], cstat[1], cstat[2], cstat[3]);
+ return (ebuf);
+}
Index: head/usr.sbin/sesutil/sesutil.8
===================================================================
--- head/usr.sbin/sesutil/sesutil.8
+++ head/usr.sbin/sesutil/sesutil.8
@@ -24,7 +24,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd September 1, 2015
+.Dd September 6, 2015
.Dt SESUTIL 8
.Os
.Sh NAME
@@ -32,34 +32,87 @@
.Nd Utility for managing SCSI Enclosure Services (SES) device
.Sh SYNOPSIS
.Nm
-.Cm locate Ar disk Bq on|off
+.Cm fault
+.Op Fl u Ar /dev/sesN
+.Aq Ar disk | Ar sesid | Li all
+.Op on | off
+.Nm
+.Cm locate
+.Op Fl u Ar /dev/sesN
+.Aq Ar disk | Ar sesid | Li all
+.Op on | off
+.Nm
+.Cm map
+.Op Fl u Ar /dev/sesN
+.Nm
+.Cm status
+.Op Fl u Ar /dev/sesN
.Sh DESCRIPTION
The
.Nm
-utility can be used to modify various parameter on SCSI Enclosure Services
-(SES) device.
+utility can be used to query and modify various parameter of SCSI Enclosure
+Services (SES) devices.
.Pp
List of supported commands:
.Bl -tag -width indent
-.It Cm locate Ar disk Bq on|off
-Change the state of the external LED associated with
+.It Cm fault Oo Fl u Ar /dev/sesN Oc Ao Ar disk | Li all Ac Op on | off
+Change the state of the external fault LED associated with
+.Ar disk .
+.Ar disk
+can be the device name of the disk, like
+.Cm da12 ,
+or
+.Ql all .
+to indicate all disks attached to SES controllers.
+.It Cm fault Fl u Ar /dev/sesN Ar sesid Op on | off
+Change the state of the external fault LED associated with an element
+connected to the SES controller.
+.Ar sesid
+must be the element ID of a valid item attached to the controller.
+Use the
+.Cm map
+command to list the elements attached to a controller.
+.It Cm locate Oo Fl u Ar /dev/sesN Oc Ao Ar disk | Li all Ac Op on | off
+Change the state of the external locate LED associated with
.Ar disk .
.Ar disk
can be the device name of the disk, like
.Cm da12 ,
or
-.Cm all .
+.Ql all .
to indicate all disks attached to SES controllers.
+.It Cm locate Fl u Ar /dev/sesN Ar sesid Op on | off
+Change the state of the external locate LED associated with an element
+connected to the SES controller.
+.Ar sesid
+must be the element ID of a valid item attached to the controller.
+Use the
+.Cm map
+command to list the elements attached to a controller.
+.It Cm map Op Fl u Ar /dev/sesN
+Display a map of all elements connected to the specified
+.Xr ses 4
+controller.
+If no controller is specified, all controllers are mapped.
+.It Cm status Op Fl u Ar /dev/sesN
+Display the status of the specified
+.Xr ses 4
+controller.
+If no controller is specified, the status of each controller is returned.
.El
.Sh EXAMPLES
-Turn off all external LEDs:
+Turn off all locate LEDs:
.Pp
.Dl Nm Cm locate all off
.Pp
-Turn on the external LED of drive
+Turn on the locate LED for the drive bay corresponding to
.Pa da15 :
.Pp
.Dl Nm Cm locate da15 on
+.Pp
+Turn on the fault LED for a drive bay not associated with a device:
+.Pp
+.Dl Nm Cm fault -u /dev/ses2 7 on
.Sh SEE ALSO
.Xr ses 4
.Sh HISTORY
@@ -68,6 +121,10 @@
utility first appeared in
.Fx 11.0 .
.Sh AUTHORS
+.An -nosplit
The
-.Nm utility was written by
-.An Baptiste Daroussin Aq Mt bapt@FreeBSD.org .
+.Nm
+utility was written by
+.An Baptiste Daroussin Aq Mt bapt@FreeBSD.org
+and
+.An Allan Jude Aq Mt allanjude@FreeBSD.org .
Index: head/usr.sbin/sesutil/sesutil.c
===================================================================
--- head/usr.sbin/sesutil/sesutil.c
+++ head/usr.sbin/sesutil/sesutil.c
@@ -1,5 +1,7 @@
/*-
* Copyright (c) 2015 Baptiste Daroussin <bapt@FreeBSD.org>
+ * Copyright (c) 2015 Allan Jude <allanjude@FreeBSD.org>
+ * Copyright (c) 2000 by Matthew Jacob
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -33,6 +35,7 @@
#include <err.h>
#include <errno.h>
#include <fcntl.h>
+#include <getopt.h>
#include <glob.h>
#include <stdbool.h>
#include <stddef.h>
@@ -45,21 +48,66 @@
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_enc.h>
+#include "eltsub.h"
+
+static int encstatus(int argc, char **argv);
+static int fault(int argc, char **argv);
static int locate(int argc, char **argv);
+static int objmap(int argc, char **argv);
+static int sesled(int argc, char **argv, bool fault);
static struct command {
const char *name;
+ const char *param;
const char *desc;
int (*exec)(int argc, char **argv);
} cmds[] = {
- { "locate", "Change the state of the external LED associated with a"
- " disk", locate} ,
+ { "fault",
+ "(<disk>|<sesid>|all) (on|off)",
+ "Change the state of the fault LED associated with a disk",
+ fault },
+ { "locate",
+ "(<disk>|<sesid>|all) (on|off)",
+ "Change the state of the locate LED associated with a disk",
+ locate },
+ { "map", "",
+ "Print a map of the devices managed by the enclosure", objmap } ,
+ { "status", "", "Print the status of the enclosure",
+ encstatus },
};
static const int nbcmds = nitems(cmds);
+static const char *uflag;
+
+static void
+usage(FILE *out, const char *subcmd)
+{
+ int i;
+
+ if (subcmd == NULL) {
+ fprintf(out, "Usage: %s [-u /dev/ses<N>] <command> [options]\n",
+ getprogname());
+ fprintf(out, "Commands supported:\n");
+ }
+ for (i = 0; i < nbcmds; i++) {
+ if (subcmd != NULL) {
+ if (strcmp(subcmd, cmds[i].name) == 0) {
+ fprintf(out, "Usage: %s %s [-u /dev/ses<N>] "
+ "%s\n\t%s\n", getprogname(), subcmd,
+ cmds[i].param, cmds[i].desc);
+ break;
+ }
+ continue;
+ }
+ fprintf(out, " %-12s%s\n\t\t%s\n\n", cmds[i].name,
+ cmds[i].param, cmds[i].desc);
+ }
+
+ exit(EXIT_FAILURE);
+}
static void
-do_locate(int fd, unsigned int idx, bool onoff)
+do_led(int fd, unsigned int idx, bool onoff, bool fault)
{
encioc_elm_status_t o;
@@ -69,10 +117,11 @@
err(EXIT_FAILURE, "ENCIOC_GETELMSTAT");
}
o.cstat[0] |= 0x80;
- if (onoff)
- o.cstat[2] |= 0x02;
- else
- o.cstat[2] &= 0xfd;
+ if (onoff) {
+ o.cstat[2] |= (fault ? 0x20 : 0x02);
+ } else {
+ o.cstat[2] &= (fault ? 0xdf : 0xfd);
+ }
if (ioctl(fd, ENCIOC_SETELMSTAT, (caddr_t) &o) < 0) {
close(fd);
@@ -87,39 +136,54 @@
dname = devnames;
while ((dname = strstr(dname, disk)) != NULL) {
- if (dname[len] == '\0' || dname[len] == ',')
+ if (dname[len] == '\0' || dname[len] == ',') {
return (true);
+ }
dname++;
}
+
return (false);
}
static int
-locate(int argc, char **argv)
+sesled(int argc, char **argv, bool fault)
{
encioc_elm_devnames_t objdn;
encioc_element_t *objp;
glob_t g;
- char *disk;
- size_t len, i;
- int fd, nobj, j;
- bool all = false;
- bool onoff;
-
- if (argc != 2) {
- errx(EXIT_FAILURE, "usage: %s locate [disk] [on|off]",
- getprogname());
+ char *disk, *endptr;
+ size_t len, i, ndisks;
+ int fd;
+ unsigned int nobj, j, sesid;
+ bool all, isses, onoff;
+
+ isses = false;
+ all = false;
+ onoff = false;
+
+ if (argc != 3) {
+ usage(stderr, (fault ? "fault" : "locate"));
+ }
+
+ disk = argv[1];
+
+ sesid = strtoul(disk, &endptr, 10);
+ if (*endptr == '\0') {
+ endptr = strrchr(uflag, '*');
+ if (*endptr == '*') {
+ warnx("Must specifying a SES device (-u) to use a SES "
+ "id# to identify a disk");
+ usage(stderr, (fault ? "fault" : "locate"));
+ }
+ isses = true;
}
- disk = argv[0];
-
- if (strcmp(argv[1], "on") == 0) {
+ if (strcmp(argv[2], "on") == 0) {
onoff = true;
- } else if (strcmp(argv[1], "off") == 0) {
+ } else if (strcmp(argv[2], "off") == 0) {
onoff = false;
} else {
- errx(EXIT_FAILURE, "usage: %s locate [disk] [on|off]",
- getprogname());
+ usage(stderr, (fault ? "fault" : "locate"));
}
if (strcmp(disk, "all") == 0) {
@@ -128,97 +192,347 @@
len = strlen(disk);
/* Get the list of ses devices */
- if (glob("/dev/ses[0-9]*", 0, NULL, &g) == GLOB_NOMATCH) {
+ if (glob((uflag != NULL ? uflag : "/dev/ses[0-9]*"), 0, NULL, &g) ==
+ GLOB_NOMATCH) {
globfree(&g);
errx(EXIT_FAILURE, "No SES devices found");
}
+
+ ndisks = 0;
for (i = 0; i < g.gl_pathc; i++) {
/* ensure we only got numbers after ses */
if (strspn(g.gl_pathv[i] + 8, "0123456789") !=
- strlen(g.gl_pathv[i] + 8))
+ strlen(g.gl_pathv[i] + 8)) {
continue;
+ }
if ((fd = open(g.gl_pathv[i], O_RDWR)) < 0) {
- if (errno == EACCES)
- err(EXIT_FAILURE, "enable to access SES device");
- break;
+ /*
+ * Don't treat non-access errors as critical if we are
+ * accessing all devices
+ */
+ if (errno == EACCES && g.gl_pathc > 1) {
+ err(EXIT_FAILURE, "unable to access SES device");
+ }
+ warn("unable to access SES device: %s", g.gl_pathv[i]);
+ continue;
}
- if (ioctl(fd, ENCIOC_GETNELM, (caddr_t) &nobj) < 0)
+ if (ioctl(fd, ENCIOC_GETNELM, (caddr_t) &nobj) < 0) {
+ close(fd);
err(EXIT_FAILURE, "ENCIOC_GETNELM");
+ }
objp = calloc(nobj, sizeof(encioc_element_t));
- if (objp == NULL)
+ if (objp == NULL) {
+ close(fd);
err(EXIT_FAILURE, "calloc()");
+ }
- if (ioctl(fd, ENCIOC_GETELMMAP, (caddr_t) objp) < 0)
+ if (ioctl(fd, ENCIOC_GETELMMAP, (caddr_t) objp) < 0) {
+ close(fd);
err(EXIT_FAILURE, "ENCIOC_GETELMMAP");
+ }
+ if (isses) {
+ if (sesid > nobj) {
+ close(fd);
+ errx(EXIT_FAILURE,
+ "Requested SES ID does not exist");
+ }
+ do_led(fd, sesid, onoff, fault);
+ ndisks++;
+ close(fd);
+ break;
+ }
for (j = 0; j < nobj; j++) {
memset(&objdn, 0, sizeof(objdn));
objdn.elm_idx = objp[j].elm_idx;
objdn.elm_names_size = 128;
objdn.elm_devnames = calloc(128, sizeof(char));
- if (objdn.elm_devnames == NULL)
+ if (objdn.elm_devnames == NULL) {
+ close(fd);
err(EXIT_FAILURE, "calloc()");
+ }
if (ioctl(fd, ENCIOC_GETELMDEVNAMES,
- (caddr_t) &objdn) <0)
+ (caddr_t) &objdn) <0) {
continue;
+ }
if (objdn.elm_names_len > 0) {
if (all) {
- do_locate(fd, objdn.elm_idx, onoff);
+ do_led(fd, objdn.elm_idx,
+ onoff, fault);
continue;
}
if (disk_match(objdn.elm_devnames, disk, len)) {
- do_locate(fd, objdn.elm_idx, onoff);
+ do_led(fd, objdn.elm_idx,
+ onoff, fault);
+ ndisks++;
break;
}
}
- }
+ }
close(fd);
}
globfree(&g);
+ if (ndisks == 0 && all == false) {
+ errx(EXIT_FAILURE, "Count not find the SES id of device '%s'",
+ disk);
+ }
return (EXIT_SUCCESS);
}
-static void
-usage(FILE *out)
+static int
+locate(int argc, char **argv)
{
- int i;
- fprintf(out, "Usage: %s [command] [options]\n", getprogname());
- fprintf(out, "Commands supported:\n");
- for (i = 0; i < nbcmds; i++)
- fprintf(out, "\t%-15s%s\n", cmds[i].name, cmds[i].desc);
+ return (sesled(argc, argv, false));
+}
+
+static int
+fault(int argc, char **argv)
+{
+
+ return (sesled(argc, argv, true));
+}
+
+static int
+objmap(int argc, char **argv __unused)
+{
+ encioc_elm_devnames_t e_devname;
+ encioc_elm_status_t e_status;
+ encioc_elm_desc_t e_desc;
+ encioc_element_t *e_ptr;
+ glob_t g;
+ int fd;
+ unsigned int j, nobj;
+ size_t i;
+
+ if (argc != 1) {
+ usage(stderr, "map");
+ }
+
+ /* Get the list of ses devices */
+ if (glob(uflag, 0, NULL, &g) == GLOB_NOMATCH) {
+ globfree(&g);
+ errx(EXIT_FAILURE, "No SES devices found");
+ }
+ for (i = 0; i < g.gl_pathc; i++) {
+ /* ensure we only got numbers after ses */
+ if (strspn(g.gl_pathv[i] + 8, "0123456789") !=
+ strlen(g.gl_pathv[i] + 8)) {
+ continue;
+ }
+ if ((fd = open(g.gl_pathv[i], O_RDWR)) < 0) {
+ /*
+ * Don't treat non-access errors as critical if we are
+ * accessing all devices
+ */
+ if (errno == EACCES && g.gl_pathc > 1) {
+ err(EXIT_FAILURE, "unable to access SES device");
+ }
+ warn("unable to access SES device: %s", g.gl_pathv[i]);
+ continue;
+ }
+
+ if (ioctl(fd, ENCIOC_GETNELM, (caddr_t) &nobj) < 0) {
+ close(fd);
+ err(EXIT_FAILURE, "ENCIOC_GETNELM");
+ }
+
+ e_ptr = calloc(nobj, sizeof(encioc_element_t));
+ if (e_ptr == NULL) {
+ close(fd);
+ err(EXIT_FAILURE, "calloc()");
+ }
+
+ if (ioctl(fd, ENCIOC_GETELMMAP, (caddr_t) e_ptr) < 0) {
+ close(fd);
+ err(EXIT_FAILURE, "ENCIOC_GETELMMAP");
+ }
+
+ printf("%s:\n", g.gl_pathv[i] + 5);
+ for (j = 0; j < nobj; j++) {
+ /* Get the status of the element */
+ memset(&e_status, 0, sizeof(e_status));
+ e_status.elm_idx = e_ptr[j].elm_idx;
+ if (ioctl(fd, ENCIOC_GETELMSTAT,
+ (caddr_t) &e_status) < 0) {
+ close(fd);
+ err(EXIT_FAILURE, "ENCIOC_GETELMSTAT");
+ }
+ /* Get the description of the element */
+ memset(&e_desc, 0, sizeof(e_desc));
+ e_desc.elm_idx = e_ptr[j].elm_idx;
+ e_desc.elm_desc_len = UINT16_MAX;
+ e_desc.elm_desc_str = calloc(UINT16_MAX, sizeof(char));
+ if (e_desc.elm_desc_str == NULL) {
+ close(fd);
+ err(EXIT_FAILURE, "calloc()");
+ }
+ if (ioctl(fd, ENCIOC_GETELMDESC,
+ (caddr_t) &e_desc) < 0) {
+ close(fd);
+ err(EXIT_FAILURE, "ENCIOC_GETELMDESC");
+ }
+ /* Get the device name(s) of the element */
+ memset(&e_devname, 0, sizeof(e_devname));
+ e_devname.elm_idx = e_ptr[j].elm_idx;
+ e_devname.elm_names_size = 128;
+ e_devname.elm_devnames = calloc(128, sizeof(char));
+ if (e_devname.elm_devnames == NULL) {
+ close(fd);
+ err(EXIT_FAILURE, "calloc()");
+ }
+ if (ioctl(fd, ENCIOC_GETELMDEVNAMES,
+ (caddr_t) &e_devname) <0) {
+ /* We don't care if this fails */
+ e_devname.elm_devnames[0] = '\0';
+ }
+ printf("\tElement %u, Type: %s\n", e_ptr[j].elm_idx,
+ geteltnm(e_ptr[j].elm_type));
+ printf("\t\tStatus: %s\n",
+ stat2ascii(e_ptr[i].elm_type, e_status.cstat));
+ if (e_desc.elm_desc_len > 0) {
+ printf("\t\tDescription: %s\n",
+ e_desc.elm_desc_str);
+ }
+ if (e_devname.elm_names_len > 0) {
+ printf("\t\tDevice Names: %s\n",
+ e_devname.elm_devnames);
+ }
+ free(e_devname.elm_devnames);
+ }
+ close(fd);
+ }
+ globfree(&g);
+
+ return (EXIT_SUCCESS);
+}
+
+static int
+encstatus(int argc, char **argv __unused)
+{
+ glob_t g;
+ int fd, status;
+ size_t i, e;
+ u_char estat;
+
+ status = 0;
+ if (argc != 1) {
+ usage(stderr, "status");
+ }
+
+ /* Get the list of ses devices */
+ if (glob(uflag, 0, NULL, &g) == GLOB_NOMATCH) {
+ globfree(&g);
+ errx(EXIT_FAILURE, "No SES devices found");
+ }
+ for (i = 0; i < g.gl_pathc; i++) {
+ /* ensure we only got numbers after ses */
+ if (strspn(g.gl_pathv[i] + 8, "0123456789") !=
+ strlen(g.gl_pathv[i] + 8)) {
+ continue;
+ }
+ if ((fd = open(g.gl_pathv[i], O_RDWR)) < 0) {
+ /*
+ * Don't treat non-access errors as critical if we are
+ * accessing all devices
+ */
+ if (errno == EACCES && g.gl_pathc > 1) {
+ err(EXIT_FAILURE, "unable to access SES device");
+ }
+ warn("unable to access SES device: %s", g.gl_pathv[i]);
+ continue;
+ }
+
+ if (ioctl(fd, ENCIOC_GETENCSTAT, (caddr_t) &estat) < 0) {
+ close(fd);
+ err(EXIT_FAILURE, "ENCIOC_GETENCSTAT");
+ }
+
+ printf("%s: ", g.gl_pathv[i] + 5);
+ e = 0;
+ if (estat == 0) {
+ if (status == 0) {
+ status = 1;
+ }
+ printf("OK");
+ } else {
+ if (estat & SES_ENCSTAT_INFO) {
+ printf("INFO");
+ e++;
+ }
+ if (estat & SES_ENCSTAT_NONCRITICAL) {
+ if (e)
+ printf(",");
+ printf("NONCRITICAL");
+ e++;
+ }
+ if (estat & SES_ENCSTAT_CRITICAL) {
+ if (e)
+ printf(",");
+ printf("CRITICAL");
+ e++;
+ status = -1;
+ }
+ if (estat & SES_ENCSTAT_UNRECOV) {
+ if (e)
+ printf(",");
+ printf("UNRECOV");
+ e++;
+ status = -1;
+ }
+ }
+ printf("\n");
+
+ close(fd);
+ }
+ globfree(&g);
+
+ if (status == 1) {
+ return (EXIT_SUCCESS);
+ } else {
+ return (EXIT_FAILURE);
+ }
}
int
main(int argc, char **argv)
{
- int i;
+ int i, ch;
struct command *cmd = NULL;
- if (argc < 2) {
+ uflag = "/dev/ses[0-9]*";
+ while ((ch = getopt_long(argc, argv, "u:", NULL, NULL)) != -1) {
+ switch (ch) {
+ case 'u':
+ uflag = optarg;
+ break;
+ case '?':
+ default:
+ usage(stderr, NULL);
+ }
+ }
+ argc -= optind;
+ argv += optind;
+
+ if (argc < 1) {
warnx("Missing command");
- usage(stderr);
- return (EXIT_FAILURE);
+ usage(stderr, NULL);
}
for (i = 0; i < nbcmds; i++) {
- if (strcmp(argv[1], cmds[i].name) == 0) {
+ if (strcmp(argv[0], cmds[i].name) == 0) {
cmd = &cmds[i];
break;
}
}
if (cmd == NULL) {
- warnx("unknown command %s", argv[1]);
- usage(stderr);
- return (EXIT_FAILURE);
+ warnx("unknown command %s", argv[0]);
+ usage(stderr, NULL);
}
- argc-=2;
- argv+=2;
-
return (cmd->exec(argc, argv));
}

File Metadata

Mime Type
text/plain
Expires
Mon, Mar 23, 3:00 AM (5 h, 6 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
30155172
Default Alt Text
D3580.diff (23 KB)

Event Timeline