Page MenuHomeFreeBSD
Files F145013488

D6394.diff
No OneTemporary
Actions

D6394.diff
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.
Index: head/sys/boot/fdt/dts/mips/fbsd-mt7620a.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-mt7620a.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-mt7620a.dtsi
@@ -1,35 +1,9 @@
/* $FreeBSD$ */
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@10000000/uartlite@c00";
- };
-
+&pcie {
/*
- * OpenWRT doesn't define a clock controller, but we currently need one
+ * Our driver is different that OpenWRT's, so we need slightly
+ * different values for the reg property
*/
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
-
- /* Specify the clocks node for the usbphy */
- usbphy: usbphy {
- clocks = <&clkctrl 22 &clkctrl 25>;
- };
-
- pcie@10140000 {
- /*
- * Our driver is different that OpenWRT's, so we need slightly
- * different values for the reg property
- */
- reg = <0x10140000 0x10000>;
-
- /*
- * Also, we need resets and clocks defined, so we can properly
- * initialize the PCIe
- */
- clocks = <&clkctrl 26>;
- };
+ reg = <0x10140000 0x10000>;
};
Index: head/sys/boot/fdt/dts/mips/fbsd-mt7620n.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-mt7620n.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-mt7620n.dtsi
@@ -1,21 +0,0 @@
-/* $FreeBSD$ */
-
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@10000000/uartlite@c00";
- };
-
- /*
- * OpenWRT doesn't define a clock controller, but we currently need one
- */
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
-
- /* Specify the clocks node for the usbphy */
- usbphy: usbphy {
- clocks = <&clkctrl 22 &clkctrl 25>;
- };
-};
Index: head/sys/boot/fdt/dts/mips/fbsd-mt7621.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-mt7621.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-mt7621.dtsi
@@ -1,73 +1,49 @@
/* $FreeBSD$ */
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@1E000000/uartlite@c00";
- };
-
- /*
- * OpenWRT doesn't define a clock controller, but we currently need one
- */
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
-
- palmbus@1E000000 {
- uartlite@c00 { clock-frequency = <50000000>; };
+&palmbus {
+ gpio@600 {
+ /*
+ * Mark gpio as compatible to simple-bus and override
+ * its #size-cells and provide a default ranges property
+ * so we can attach instances of our mtk_gpio_v2 driver
+ * to it for now. Provide exactly the same resources to
+ * the instances of mtk_gpio_v2.
+ */
+ compatible = "simple-bus";
+ ranges = <0x0 0x600 0x100>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ gpio0: bank@0 {
+ reg = <0x0 0x100>;
+ interrupts = <0 6 4>;
+ };
- gpio@600 {
- /*
- * Mark gpio as compatible to simple-bus and override
- * its #size-cells and provide a default ranges property
- * so we can attach instances of our mtk_gpio_v2 driver
- * to it for now. Provide exactly the same resources to
- * the instances of mtk_gpio_v2.
- */
- compatible = "simple-bus";
- ranges = <0x0 0x600 0x100>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- gpio0: bank@0 {
- reg = <0x0 0x100>;
- interrupts = <0 6 4>;
- };
-
- gpio1: bank@1 {
- reg = <0x0 0x100>;
- interrupts = <0 6 4>;
- };
-
- gpio2: bank@2 {
- reg = <0x0 0x100>;
- interrupts = <0 6 4>;
- };
+ gpio1: bank@1 {
+ reg = <0x0 0x100>;
+ interrupts = <0 6 4>;
};
- };
- xhci@1E1C0000 {
- /*
- * A slightly different value for reg size is needed by our
- * driver for the moment
- */
- reg = <0x1e1c0000 0x20000>;
+ gpio2: bank@2 {
+ reg = <0x0 0x100>;
+ interrupts = <0 6 4>;
+ };
};
+};
- pcie@1e140000 {
- /*
- * Our driver is different that OpenWRT's, so we need slightly
- * different values for the reg property
- */
- reg = <0x1e140000 0x10000>;
+&xhci {
+ /*
+ * A slightly different value for reg size is needed by our
+ * driver for the moment
+ */
+ reg = <0x1e1c0000 0x20000>;
+};
- /*
- * Also, we need resets and clocks defined, so we can properly
- * initialize the PCIe
- */
- resets = <&rstctrl 24>, <&rstctrl 25>, <&rstctrl 26>;
- clocks = <&clkctrl 24>, <&clkctrl 25>, <&clkctrl 26>;
- };
+&pcie {
+ /*
+ * Our driver is different that OpenWRT's, so we need slightly
+ * different values for the reg property
+ */
+ reg = <0x1e140000 0x10000>;
};
Index: head/sys/boot/fdt/dts/mips/fbsd-mt7628an.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-mt7628an.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-mt7628an.dtsi
@@ -1,70 +1,39 @@
/* $FreeBSD$ */
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@10000000/uart2@e00";
- };
-
- /*
- * OpenWRT doesn't define a clock controller, but we currently need one
- */
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
-
- palmbus@10000000 {
- uartlite@c00 { clock-frequency = <40000000>; };
- uart1@d00 { clock-frequency = <40000000>; };
- uart2@e00 { clock-frequency = <40000000>; };
-
- gpio@600 {
- /*
- * Mark gpio as compatible to simple-bus and override
- * its #size-cells and provide a default ranges property
- * so we can attach instances of our mtk_gpio_v2 driver
- * to it for now. Provide exactly the same resources to
- * the instances of mtk_gpio_v2.
- */
- compatible = "simple-bus";
- ranges = <0x0 0x600 0x100>;
- #size-cells = <1>;
-
- gpio0: bank@0 {
- reg = <0x0 0x100>;
- interrupts = <6>;
- };
-
- gpio1: bank@1 {
- reg = <0x0 0x100>;
- interrupts = <6>;
- };
+&palmbus {
+ gpio@600 {
+ /*
+ * Mark gpio as compatible to simple-bus and override
+ * its #size-cells and provide a default ranges property
+ * so we can attach instances of our mtk_gpio_v2 driver
+ * to it for now. Provide exactly the same resources to
+ * the instances of mtk_gpio_v2.
+ */
+ compatible = "simple-bus";
+ ranges = <0x0 0x600 0x100>;
+ #size-cells = <1>;
+
+ gpio0: bank@0 {
+ reg = <0x0 0x100>;
+ interrupts = <6>;
+ };
- gpio2: bank@2 {
- reg = <0x0 0x100>;
- interrupts = <6>;
- };
+ gpio1: bank@1 {
+ reg = <0x0 0x100>;
+ interrupts = <6>;
};
- };
- /* Specify the clocks node for the usbphy */
- usbphy: usbphy@10120000 {
- clocks = <&clkctrl 22 &clkctrl 25>;
+ gpio2: bank@2 {
+ reg = <0x0 0x100>;
+ interrupts = <6>;
+ };
};
+};
- pcie@10140000 {
+&pcie {
/*
* Our driver is different that OpenWRT's, so we need slightly
* different values for the reg property
*/
reg = <0x10140000 0x10000>;
-
- /*
- * Also, we need resets and clocks defined, so we can properly
- * initialize the PCIe
- */
- resets = <&rstctrl 26>, <&rstctrl 27>;
- clocks = <&clkctrl 26>, <&clkctrl 27>;
- };
};
Index: head/sys/boot/fdt/dts/mips/fbsd-rt2880.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-rt2880.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-rt2880.dtsi
@@ -1,16 +0,0 @@
-/* $FreeBSD$ */
-
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@300000/uartlite@c00";
- };
-
- /*
- * OpenWRT doesn't define a clock controller, but we currently need one
- */
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
-};
Index: head/sys/boot/fdt/dts/mips/fbsd-rt3050.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-rt3050.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-rt3050.dtsi
@@ -1,23 +0,0 @@
-/* $FreeBSD$ */
-
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@10000000/uartlite@c00";
- };
-
- /*
- * OpenWRT doesn't define a clock controller, but we currently need one
- */
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
-
- /* Specify the USB PHY */
- usbphy: usbphy {
- compatible = "ralink,rt3050-usbphy";
- resets = <&rstctrl 22>;
- clocks = <&clkctrl 18>;
- };
-};
Index: head/sys/boot/fdt/dts/mips/fbsd-rt3352.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-rt3352.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-rt3352.dtsi
@@ -1,21 +0,0 @@
-/* $FreeBSD$ */
-
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@10000000/uartlite@c00";
- };
-
- /*
- * OpenWRT doesn't define a clock controller, but we currently need one
- */
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
-
- /* Specify the clocks node for the usbphy */
- usbphy {
- clocks = <&clkctrl 18 &clkctrl 20>;
- };
-};
Index: head/sys/boot/fdt/dts/mips/fbsd-rt3883.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-rt3883.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-rt3883.dtsi
@@ -1,37 +1,16 @@
/* $FreeBSD$ */
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@10000000/uartlite@c00";
- };
+&pci {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <
+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000
+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000
+ >;
- /*
- * OpenWRT doesn't define a clock controller, but we currently need one
- */
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
- /* Specify the clocks node for the usbphy */
- usbphy: usbphy {
- clocks = <&clkctrl 22 &clkctrl 25>;
- clock-names = "host", "device";
- };
-
- pci@10140000 {
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <
- 0x02000000 0 0x00000000 0x20000000 0 0x10000000
- 0x01000000 0 0x00000000 0x10160000 0 0x00010000
- >;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <4>;
-
- resets = <&rstctrl 23>;
- clocks = <&clkctrl 21>;
- };
+ resets = <&rstctrl 23>;
+ clocks = <&clkctrl 21>;
};
Index: head/sys/boot/fdt/dts/mips/fbsd-rt5350.dtsi
===================================================================
--- head/sys/boot/fdt/dts/mips/fbsd-rt5350.dtsi
+++ head/sys/boot/fdt/dts/mips/fbsd-rt5350.dtsi
@@ -1,21 +0,0 @@
-/* $FreeBSD$ */
-
-/ {
- /* Specify alias for serial0 so we have a working console */
- aliases {
- serial0 = "/palmbus@10000000/uartlite@c00";
- };
-
- /*
- * OpenWRT doesn't define a clock controller, but we currently need one
- */
- clkctrl: cltctrl {
- compatible = "ralink,rt2880-clock";
- #clock-cells = <1>;
- };
-
- /* Specify the clocks node for the USB PHY */
- usbphy {
- clocks = <&clkctrl 18>;
- };
-};
Index: head/sys/gnu/dts/mips/3G-6200N.dts
===================================================================
--- head/sys/gnu/dts/mips/3G-6200N.dts
+++ head/sys/gnu/dts/mips/3G-6200N.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "3G-6200N", "ralink,rt3050-soc";
model = "Edimax 3g-6200n";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -53,18 +44,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -102,8 +81,29 @@
linux,code = <0x100>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/3G-6200NL.dts
===================================================================
--- head/sys/gnu/dts/mips/3G-6200NL.dts
+++ head/sys/gnu/dts/mips/3G-6200NL.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "3G-6200NL", "ralink,rt3050-soc";
model = "Edimax 3g-6200nl";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -53,18 +44,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -86,8 +65,29 @@
linux,code = <0x211>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/3G150B.dts
===================================================================
--- head/sys/gnu/dts/mips/3G150B.dts
+++ head/sys/gnu/dts/mips/3G150B.dts
@@ -1,83 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "3G150B", "ralink,rt5350-soc";
model = "Tenda 3G150B";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- gpio1: gpio@660 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -116,3 +44,73 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/3G300M.dts
===================================================================
--- head/sys/gnu/dts/mips/3G300M.dts
+++ head/sys/gnu/dts/mips/3G300M.dts
@@ -1,58 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "3G300M", "ralink,rt3052-soc";
model = "Tenda 3G300M";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -105,20 +58,65 @@
linux,code = <0x100>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
+&spi0 {
+ status = "okay";
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/A5-V11.dts
===================================================================
--- head/sys/gnu/dts/mips/A5-V11.dts
+++ head/sys/gnu/dts/mips/A5-V11.dts
@@ -1,82 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "A5-V11", "ralink,rt5350-soc";
model = "A5-V11";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "pm25lq032";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- gpio1: gpio@660 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -121,3 +50,73 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "pm25lq032";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x1>;
+ mediatek,portdisable = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/AI-BR100.dts
===================================================================
--- head/sys/gnu/dts/mips/AI-BR100.dts
+++ head/sys/gnu/dts/mips/AI-BR100.dts
@@ -1,85 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "AI-BR100", "ralink,mt7620a-soc";
model = "Aigale Ai-BR100";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x20000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0x7c0000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -107,3 +33,75 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot-env";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x7c0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/AIR3GII.dts
===================================================================
--- head/sys/gnu/dts/mips/AIR3GII.dts
+++ head/sys/gnu/dts/mips/AIR3GII.dts
@@ -1,74 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "AIR3GII", "ralink,rt5350-soc";
model = "AirLive Air3GII";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q32b";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -96,3 +33,64 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q32b";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/ALL0239-3G.dts
===================================================================
--- head/sys/gnu/dts/mips/ALL0239-3G.dts
+++ head/sys/gnu/dts/mips/ALL0239-3G.dts
@@ -1,19 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "ALL0239-3G", "ralink,rt3052-soc";
model = "Allnet ALL0239-3G";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
cfi@1f000000 {
compatible = "cfi-flash";
@@ -47,19 +39,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- status = "okay";
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -108,8 +87,30 @@
linux,code = <0x211>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ status = "okay";
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/ALL0256N-4M.dts
===================================================================
--- head/sys/gnu/dts/mips/ALL0256N-4M.dts
+++ head/sys/gnu/dts/mips/ALL0256N-4M.dts
@@ -1,74 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "ALL0256N", "ralink,rt3050-soc";
model = "Allnet ALL0256N";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3c8000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -101,3 +38,64 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3c8000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/ALL0256N-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/ALL0256N-8M.dts
+++ head/sys/gnu/dts/mips/ALL0256N-8M.dts
@@ -1,74 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "ALL0256N", "ralink,rt3050-soc";
model = "Allnet ALL0256N";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -101,3 +38,64 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/ALL5002.dts
===================================================================
--- head/sys/gnu/dts/mips/ALL5002.dts
+++ head/sys/gnu/dts/mips/ALL5002.dts
@@ -1,82 +1,11 @@
/dts-v1/;
-/include/ "rt3352.dtsi"
+#include "rt3352.dtsi"
/ {
compatible = "ALL5002", "ralink,rt3352-soc";
model = "Allnet ALL5002";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l25635e";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
i2c-gpio {
compatible = "i2c-gpio";
gpios = <&gpio0 1 0 &gpio0 2 0>;
@@ -109,3 +38,72 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l25635e";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/ALL5003.dts
===================================================================
--- head/sys/gnu/dts/mips/ALL5003.dts
+++ head/sys/gnu/dts/mips/ALL5003.dts
@@ -1,82 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "ALL5003", "ralink,rt5350-soc";
model = "Allnet ALL5003";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l25635e";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
i2c-gpio {
compatible = "i2c-gpio";
gpios = <&gpio0 1 0 &gpio0 2 0>;
@@ -109,3 +38,72 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l25635e";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/AR670W.dts
===================================================================
--- head/sys/gnu/dts/mips/AR670W.dts
+++ head/sys/gnu/dts/mips/AR670W.dts
@@ -1,50 +1,11 @@
/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
/ {
compatible = "AR670W", "ralink,rt2880-soc";
model = "Airlink101 AR670W";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "uartlite";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x2004>;
-
- port@0 {
- phy-handle = <&phy0>;
- phy-mode = "mii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- phy-mode = "mii";
- reg = <0>;
- };
- };
- };
-
- wmac@480000 {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x2000>;
- };
-
cfi@bdc00000 {
compatible = "cfi-flash";
reg = <0xbc400000 0x800000>;
@@ -103,3 +64,40 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "uartlite";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x2004>;
+
+ port@0 {
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x2000>;
+};
Index: head/sys/gnu/dts/mips/AR725W.dts
===================================================================
--- head/sys/gnu/dts/mips/AR725W.dts
+++ head/sys/gnu/dts/mips/AR725W.dts
@@ -1,50 +1,11 @@
/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
/ {
compatible = "AR725W", "ralink,rt2880-soc";
model = "Airlink101 AR725W";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "uartlite";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- phy-handle = <&phy0>;
- phy-mode = "mii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- phy-mode = "mii";
- reg = <0>;
- };
- };
- };
-
- wmac@480000 {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0>;
- };
-
cfi@bdc00000 {
compatible = "cfi-flash";
reg = <0xbc400000 0x800000>;
@@ -113,3 +74,40 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "uartlite";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/ASL26555-16M.dts
===================================================================
--- head/sys/gnu/dts/mips/ASL26555-16M.dts
+++ head/sys/gnu/dts/mips/ASL26555-16M.dts
@@ -1,96 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "ASL26555", "ralink,rt3050-soc";
model = "Alpha ASL26555";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25sl12801";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@fd0000 {
- label = "cert";
- reg = <0xfd0000 0x10000>;
- read-only;
- };
-
- partition@fe0000 {
- label = "langpack";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
-
- devdata: partition@ff0000 {
- label = "devdata";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&devdata 0x4004>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x1e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&devdata 0x4000>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -154,3 +69,86 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25sl12801";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "cert";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "langpack";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ devdata: partition@ff0000 {
+ label = "devdata";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x1e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/ASL26555-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/ASL26555-8M.dts
+++ head/sys/gnu/dts/mips/ASL26555-8M.dts
@@ -1,90 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "ASL26555", "ralink,rt3050-soc";
model = "Alpha ASL26555";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25sl064p";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- ubootenv: partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "rgdb";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x790000>;
- };
-
- partition@7e0000 {
- label = "cert";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- partition@7f0000 {
- label = "langpack";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&ubootenv 0x4004>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x1e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&ubootenv 0x4000>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -148,3 +69,80 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25sl064p";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ ubootenv: partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "rgdb";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+
+ partition@7e0000 {
+ label = "cert";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "langpack";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&ubootenv 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x1e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&ubootenv 0x4000>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/ATP-52B.dts
===================================================================
--- head/sys/gnu/dts/mips/ATP-52B.dts
+++ head/sys/gnu/dts/mips/ATP-52B.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "ATP-52B", "ralink,rt3052-soc";
model = "Argus ATP-52B";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -77,20 +68,30 @@
linux,code = <0x198>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/AWAPN2403.dts
===================================================================
--- head/sys/gnu/dts/mips/AWAPN2403.dts
+++ head/sys/gnu/dts/mips/AWAPN2403.dts
@@ -1,66 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "AWAPN2403", "ralink,rt3052-soc";
model = "AsiaRF AWAPN2403";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -83,3 +28,56 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/AWM002-4M.dtsi
===================================================================
--- head/sys/gnu/dts/mips/AWM002-4M.dtsi
+++ head/sys/gnu/dts/mips/AWM002-4M.dtsi
@@ -1,15 +1,11 @@
-/include/ "AWM002.dtsi"
+#include "AWM002.dtsi"
/ {
compatible = "AWM002", "ralink,rt5350-soc";
model = "AsiaRF AWM002";
+};
- palmbus@10000000 {
- spi@b00 {
- m25p80@0 {
- compatible = "jedec,spi-nor";
- linux,modalias = "m25p80", "mx25l3205d";
- };
- };
- };
+&m25p80 {
+ compatible = "jedec,spi-nor";
+ linux,modalias = "m25p80", "mx25l3205d";
};
Index: head/sys/gnu/dts/mips/AWM002-8M.dtsi
===================================================================
--- head/sys/gnu/dts/mips/AWM002-8M.dtsi
+++ head/sys/gnu/dts/mips/AWM002-8M.dtsi
@@ -1,15 +1,11 @@
-/include/ "AWM002.dtsi"
+#include "AWM002.dtsi"
/ {
compatible = "AWM002", "ralink,rt5350-soc";
model = "AsiaRF AWM002";
+};
- palmbus@10000000 {
- spi@b00 {
- m25p80@0 {
- compatible = "jedec,spi-nor";
- linux,modalias = "m25p80", "mx25l6405d";
- };
- };
- };
+&m25p80 {
+ compatible = "jedec,spi-nor";
+ linux,modalias = "m25p80", "mx25l6405d";
};
Index: head/sys/gnu/dts/mips/AWM002-EVB-4M.dts
===================================================================
--- head/sys/gnu/dts/mips/AWM002-EVB-4M.dts
+++ head/sys/gnu/dts/mips/AWM002-EVB-4M.dts
@@ -1,18 +1,10 @@
/dts-v1/;
-/include/ "AWM002-4M.dtsi"
+#include "AWM002-4M.dtsi"
/ {
model = "AsiaRF AWM002 EVB";
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -51,3 +43,11 @@
};
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/AWM002-EVB-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/AWM002-EVB-8M.dts
+++ head/sys/gnu/dts/mips/AWM002-EVB-8M.dts
@@ -1,18 +1,10 @@
/dts-v1/;
-/include/ "AWM002-8M.dtsi"
+#include "AWM002-8M.dtsi"
/ {
model = "AsiaRF AWM002 EVB";
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -51,3 +43,11 @@
};
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/AWM002.dtsi
===================================================================
--- head/sys/gnu/dts/mips/AWM002.dtsi
+++ head/sys/gnu/dts/mips/AWM002.dtsi
@@ -1,67 +1,9 @@
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "AWM002", "ralink,rt5350-soc";
model = "AsiaRF AWM002";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0 0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag";
- ralink,function = "gpio";
- };
- };
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3f>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -76,3 +18,59 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default {
+ gpio {
+ ralink,group = "i2c", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/AWM003-EVB.dts
===================================================================
--- head/sys/gnu/dts/mips/AWM003-EVB.dts
+++ head/sys/gnu/dts/mips/AWM003-EVB.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "AWM002-8M.dtsi"
+#include "AWM002-8M.dtsi"
/ {
compatible = "AWM003", "ralink,rt5350-soc";
@@ -11,23 +11,6 @@
reg = <0x0 0x4000000>;
};
- palmbus@10000000 {
- spi@b00 {
- m25p80@0 {
- compatible = "jedec,spi-nor";
- linux,modalias = "m25p80", "mx25l6405d";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -66,3 +49,16 @@
};
};
};
+
+&m25p80 {
+ compatible = "jedec,spi-nor";
+ linux,modalias = "m25p80", "mx25l6405d";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/ArcherC20i.dts
===================================================================
--- head/sys/gnu/dts/mips/ArcherC20i.dts
+++ head/sys/gnu/dts/mips/ArcherC20i.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
@@ -10,109 +10,107 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- };
-
- rom: partition@7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- };
-
- partition@7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- };
-
- radio: partition@7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- };
- };
+ gpio-leds {
+ compatible = "gpio-leds";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
};
};
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
};
};
+};
- ethernet@10100000 {
+&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&rom 0xf100>;
mediatek,portmap = "wllll";
};
- ehci@101c0000 {
- status = "okay";
- };
+&ehci {
+ status = "okay";
+};
- ohci@101c1000 {
- status = "okay";
- };
+&ohci {
+ status = "okay";
+};
- gsw@10110000 {
- mediatek,port4 = "ephy";
- };
+&gsw {
+ mediatek,port4 = "ephy";
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&radio 0>;
- };
+&wmac {
+ ralink,mtd-eeprom = <&radio 0>;
+};
- pcie@10140000 {
- status = "okay";
+&pcie {
+ status = "okay";
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&radio 32768>;
- mediatek,2ghz = <0>;
- };
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&radio 32768>;
+ mediatek,2ghz = <0>;
};
};
-
- gpio-leds {
- compatible = "gpio-leds";
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
- };
};
Index: head/sys/gnu/dts/mips/BC2.dts
===================================================================
--- head/sys/gnu/dts/mips/BC2.dts
+++ head/sys/gnu/dts/mips/BC2.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "BC2", "ralink,rt3052-soc";
model = "NexAira BC2";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -68,20 +59,29 @@
linux,code = <0x198>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/BR-6425.dts
===================================================================
--- head/sys/gnu/dts/mips/BR-6425.dts
+++ head/sys/gnu/dts/mips/BR-6425.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "BR-6425", "ralink,rt3052-soc";
model = "Edimax BR-6425";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -24,18 +15,6 @@
#size-cells = <1>;
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -69,3 +48,24 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+/* mtd-mac-address = <&factory 0x4>; */
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+/* ralink,mtd-eeprom = <&factory 0>; */
+};
Index: head/sys/gnu/dts/mips/BR-6475ND.dts
===================================================================
--- head/sys/gnu/dts/mips/BR-6475ND.dts
+++ head/sys/gnu/dts/mips/BR-6475ND.dts
@@ -1,82 +1,50 @@
/dts-v1/;
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
/ {
compatible = "BR-6475ND", "ralink,rt3883-soc";
model = "Edimax BR-6475nD";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- palmbus@10000000 {
- timer@100 {
- status = "okay";
- };
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
- gpio1: gpio@638 {
- status = "okay";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 7 1>;
+ linux,code = <0x198>;
};
- uartlite@c00 {
- status = "okay";
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 9 1>;
+ linux,input-type = <5>;
+ linux,code = <0xf7>;
};
};
- ethernet@10100000 {
- status = "okay";
- mtd-mac-address = <&devdata 0x0d>;
+ gpio-leds {
+ compatible = "gpio-leds";
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
+ power {
+ label = "br-6475nd:green:power";
+ gpios = <&gpio0 10 1>;
};
- };
- wmac@10180000 {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pci@10140000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pci_pins>;
-
- pci_pins: pci {
- pci {
- ralink,group = "pci";
- ralink,function = "pci-fnc";
- };
+ wlan {
+ label = "br-6475nd:amber:wlan";
+ gpios = <&gpio0 11 1>;
};
- host-bridge {
- pci-bridge@1 {
- status = "okay";
-
- wmac@0,0 {
- ralink,5ghz = <0>;
- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
- reg = < 0x10000 0 0 0 0 >;
- ralink,eeprom = "rt2x00pci_1_0.eeprom";
- };
- };
+ wlan_5ghz {
+ label = "br-6475nd:amber:wlan_5ghz";
+ gpios = <&gpio0 14 1>;
};
};
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
@@ -126,58 +94,88 @@
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
+ /* Unclear if this is the correct gpio setup; the USB ports are
+ unpopulated on a stock BR-6475nD, even though the hardware exists
+ and the headers are there. */
+ /*
+ gpio_export {
+ compatible = "gpio-export";
#size-cells = <0>;
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio0 7 1>;
- linux,code = <0x198>;
+ usb {
+ gpio-export,name="usb";
+ gpio-export,output=<0>;
+ gpios = <&gpio0 19 0>;
};
+ };
+ */
+};
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 9 1>;
- linux,input-type = <5>;
- linux,code = <0xf7>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "jtag", "uartf";
+ ralink,function = "gpio";
};
};
+};
- gpio-leds {
- compatible = "gpio-leds";
+&timer {
+ status = "okay";
+};
- power {
- label = "br-6475nd:green:power";
- gpios = <&gpio0 10 1>;
- };
+&gpio1 {
+ status = "okay";
+};
- wlan {
- label = "br-6475nd:amber:wlan";
- gpios = <&gpio0 11 1>;
- };
+&uartlite {
+ status = "okay";
+};
- wlan_5ghz {
- label = "br-6475nd:amber:wlan_5ghz";
- gpios = <&gpio0 14 1>;
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&devdata 0x0d>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pci {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pci_pins>;
+
+ pci_pins: pci {
+ pci {
+ ralink,group = "pci";
+ ralink,function = "pci-fnc";
};
};
- /* Unclear if this is the correct gpio setup; the USB ports are
- unpopulated on a stock BR-6475nD, even though the hardware exists
- and the headers are there. */
- /*
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
- usb {
- gpio-export,name="usb";
- gpio-export,output=<0>;
- gpios = <&gpio0 19 0>;
+ wmac@0,0 {
+ ralink,5ghz = <0>;
+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
+ reg = < 0x10000 0 0 0 0 >;
+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
+ };
};
};
- */
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/BROADWAY.dts
===================================================================
--- head/sys/gnu/dts/mips/BROADWAY.dts
+++ head/sys/gnu/dts/mips/BROADWAY.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "BROADWAY", "ralink,rt3052-soc";
model = "Hauppauge Broadway";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -85,8 +64,29 @@
linux,code = <0x198>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/CARAMBOLA.dts
===================================================================
--- head/sys/gnu/dts/mips/CARAMBOLA.dts
+++ head/sys/gnu/dts/mips/CARAMBOLA.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "CARAMBOLA", "ralink,rt3050-soc";
@@ -10,15 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -51,25 +42,34 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
+ i2c-gpio {
+ compatible = "i2c-gpio";
+ gpios = <&gpio0 1 0 &gpio0 2 0>;
+ i2c-gpio,delay-us = <10>;
};
+};
- esw@10110000 {
- mediatek,portmap = <0x3f>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&esw {
+ mediatek,portmap = <0x3f>;
+};
- i2c-gpio {
- compatible = "i2c-gpio";
- gpios = <&gpio0 1 0 &gpio0 2 0>;
- i2c-gpio,delay-us = <10>;
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/CF-WR800N.dts
===================================================================
--- head/sys/gnu/dts/mips/CF-WR800N.dts
+++ head/sys/gnu/dts/mips/CF-WR800N.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "cf-wr800n", "ralink,mt7620n-soc";
@@ -10,77 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "spi refclk", "i2c";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -113,3 +42,72 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "spi refclk", "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/CS-QR10.dts
===================================================================
--- head/sys/gnu/dts/mips/CS-QR10.dts
+++ head/sys/gnu/dts/mips/CS-QR10.dts
@@ -0,0 +1,161 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Planex CS-QR10";
+
+ sound {
+ compatible = "mediatek,mt7620-audio-wm8960";
+ model = "mt7620-wm8960";
+ i2s-controller = <&i2s>;
+ audio-routing =
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "cs-qr10:red:power";
+ gpios = <&gpio1 4 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ s1 {
+ label = "reset";
+ gpios = <&gpio1 1 1>;
+ linux,code = <0x198>;
+ };
+
+ s2 {
+ label = "wps";
+ gpios = <&gpio1 3 1>;
+ linux,code = <0x211>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&i2s {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcm_i2s_pins>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pcm {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi refclk", "rgmii1";
+ ralink,function = "gpio";
+ };
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "wdt refclk";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ ralink,port4 = "ephy";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/CY-SWR1100.dts
===================================================================
--- head/sys/gnu/dts/mips/CY-SWR1100.dts
+++ head/sys/gnu/dts/mips/CY-SWR1100.dts
@@ -1,73 +1,11 @@
/dts-v1/;
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
/ {
compatible = "CY-SWR1100", "ralink,rt3883-soc";
model = "Samsung CY-SWR1100";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
- };
-
- pci@10140000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pci_pins>;
-
- pci_pins: pci {
- pci {
- ralink,group = "pci";
- ralink,function = "pci-fnc";
- };
- };
-
- host-bridge {
- pci-bridge@1 {
- status = "okay";
-
- wmac@0,0 {
- ralink,5ghz = <0>;
- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
- reg = < 0x10000 0 0 0 0 >;
- ralink,eeprom = "rt2x00pci_1_0.eeprom";
- };
- };
- };
- };
-
- wmac@10180000 {
- status = "okay";
- ralink,2ghz = <0>;
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
@@ -150,3 +88,63 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+};
+
+&pci {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pci_pins>;
+
+ pci_pins: pci {
+ pci {
+ ralink,group = "pci";
+ ralink,function = "pci-fnc";
+ };
+ };
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+
+ wmac@0,0 {
+ ralink,5ghz = <0>;
+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
+ reg = < 0x10000 0 0 0 0 >;
+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,2ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/D105.dts
===================================================================
--- head/sys/gnu/dts/mips/D105.dts
+++ head/sys/gnu/dts/mips/D105.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "D105", "ralink,rt3050-soc";
model = "Huawei D105";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -73,20 +64,29 @@
linux,code = <0x198>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/DAP-1350.dts
===================================================================
--- head/sys/gnu/dts/mips/DAP-1350.dts
+++ head/sys/gnu/dts/mips/DAP-1350.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "DAP-1350", "ralink,rt3052-soc";
@@ -10,15 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -57,18 +48,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&devdata 0x2e>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&devdata 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -118,8 +97,29 @@
linux,code = <0x101>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&devdata 0x2e>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/DB-WRT01.dts
===================================================================
--- head/sys/gnu/dts/mips/DB-WRT01.dts
+++ head/sys/gnu/dts/mips/DB-WRT01.dts
@@ -1,81 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex DB-WRT01";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "en25q64";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi refclk", "rgmii1";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -98,3 +28,71 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi refclk", "rgmii1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/DCS-930.dts
===================================================================
--- head/sys/gnu/dts/mips/DCS-930.dts
+++ head/sys/gnu/dts/mips/DCS-930.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "DCS-930", "ralink,rt3050-soc";
model = "D-Link DCS-930";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x400000>;
@@ -94,20 +85,29 @@
linux,code = <0x198>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/DCS-930L-B1.dts
===================================================================
--- head/sys/gnu/dts/mips/DCS-930L-B1.dts
+++ head/sys/gnu/dts/mips/DCS-930L-B1.dts
@@ -1,78 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "DCS-930L-B1", "ralink,rt5350-soc";
model = "D-Link DCS-930L B1";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -106,3 +39,68 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/DIR-300-B1.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-300-B1.dts
+++ head/sys/gnu/dts/mips/DIR-300-B1.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "DIR-300-B1", "ralink,rt3050-soc";
model = "D-Link DIR-300 B1";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&devdata 0x4004>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&devdata 0x4000>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -107,3 +86,24 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
Index: head/sys/gnu/dts/mips/DIR-300-B7.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-300-B7.dts
+++ head/sys/gnu/dts/mips/DIR-300-B7.dts
@@ -1,67 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "DIR-300-B7", "ralink,rt5350-soc";
model = "D-Link DIR-300 B7";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -94,10 +38,64 @@
linux,code = <0x211>;
};
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- wmac@10180000 {
- status = "okay";
- ralink,led-polarity = <1>;
- ralink,mtd-eeprom = <&factory 0>;
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,led-polarity = <1>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/DIR-320-B1.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-320-B1.dts
+++ head/sys/gnu/dts/mips/DIR-320-B1.dts
@@ -1,71 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "DIR-320-B1", "ralink,rt5350-soc";
model = "D-Link DIR-320 B1";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -104,14 +44,6 @@
};
};
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c0000 {
- status = "okay";
- };
-
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
@@ -129,3 +61,69 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/DIR-600-B1.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-600-B1.dts
+++ head/sys/gnu/dts/mips/DIR-600-B1.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "DIR-600-B1", "ralink,rt3050-soc";
model = "D-Link DIR-600 B1";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&devdata 0x4004>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&devdata 0x4000>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -107,3 +86,24 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
Index: head/sys/gnu/dts/mips/DIR-600-B2.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-600-B2.dts
+++ head/sys/gnu/dts/mips/DIR-600-B2.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "DIR-600-B2", "ralink,rt3050-soc";
model = "D-Link DIR-600 B2";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,14 +38,6 @@
};
};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&devdata 0x4000>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -103,3 +86,20 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
Index: head/sys/gnu/dts/mips/DIR-610-A1.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-610-A1.dts
+++ head/sys/gnu/dts/mips/DIR-610-A1.dts
@@ -1,74 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "DIR-610-A1", "ralink,rt5350-soc";
model = "D-Link DIR-610 A1";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- devdata: partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&devdata 0x4004>;
- };
-
- esw@10110000 {
- status = "okay";
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
- };
-
- wmac@10180000 {
- status = "okay";
- ralink,led-polarity = <1>;
- ralink,mtd-eeprom = <&devdata 0x4000>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -102,3 +39,64 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ devdata: partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+ status = "okay";
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,led-polarity = <1>;
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
Index: head/sys/gnu/dts/mips/DIR-615-D.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-615-D.dts
+++ head/sys/gnu/dts/mips/DIR-615-D.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "DIR-615-D", "ralink,rt3050-soc";
model = "D-Link DIR-615 D";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,14 +38,6 @@
};
};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&devdata 0x4000>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -103,3 +86,22 @@
};
};
};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+
Index: head/sys/gnu/dts/mips/DIR-615-H1.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-615-H1.dts
+++ head/sys/gnu/dts/mips/DIR-615-H1.dts
@@ -1,80 +1,11 @@
/dts-v1/;
-/include/ "rt3352.dtsi"
+#include "rt3352.dtsi"
/ {
compatible = "DIR-615-H1", "ralink,rt3352-soc";
model = "D-Link DIR-615 H1";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
-
- rgmii {
- ralink,group = "rgmii";
- ralink,function = "rgmii";
- };
-
- mdio {
- ralink,group = "mdio";
- ralink,function = "mdio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -123,3 +54,70 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+
+ rgmii {
+ ralink,group = "rgmii";
+ ralink,function = "rgmii";
+ };
+
+ mdio {
+ ralink,group = "mdio";
+ ralink,function = "mdio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/DIR-620-A1.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-620-A1.dts
+++ head/sys/gnu/dts/mips/DIR-620-A1.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "DIR-620-A1", "ralink,rt3050-soc";
model = "D-Link DIR-620 A1";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -111,8 +90,29 @@
gpios = <&gpio0 11 0>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/DIR-620-D1.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-620-D1.dts
+++ head/sys/gnu/dts/mips/DIR-620-D1.dts
@@ -1,80 +1,11 @@
/dts-v1/;
-/include/ "rt3352.dtsi"
+#include "rt3352.dtsi"
/ {
compatible = "DIR-620-D1", "ralink,rt3352-soc";
model = "D-Link DIR-620 D1";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
-
- rgmii {
- ralink,group = "rgmii";
- ralink,function = "rgmii";
- };
-
- mdio {
- ralink,group = "mdio";
- ralink,function = "mdio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -101,12 +32,79 @@
linux,code = <0x198>;
};
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- ehci@101c0000 {
- status = "okay";
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+
+ rgmii {
+ ralink,group = "rgmii";
+ ralink,function = "rgmii";
+ };
- ohci@101c1000 {
- status = "okay";
+ mdio {
+ ralink,group = "mdio";
+ ralink,function = "mdio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/DIR-645.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-645.dts
+++ head/sys/gnu/dts/mips/DIR-645.dts
@@ -1,94 +1,11 @@
/dts-v1/;
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
/ {
compatible = "DIR-645", "ralink,rt3883-soc";
model = "D-Link DIR-645";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <25000000>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x4000>;
- read-only;
- };
-
- factory: partition@34000 {
- label = "factory";
- reg = <0x34000 0x4000>;
- read-only;
- };
-
- partition@38000 {
- label = "nvram";
- reg = <0x38000 0x8000>;
- read-only;
- };
-
- partition@40000 {
- label = "devdata";
- reg = <0x40000 0x10000>;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 0>;
- };
- };
-
- wmac@10180000 {
- ralink,5ghz = <0>;
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
rtl8367b {
compatible = "realtek,rtl8367b";
gpio-sda = <&gpio0 1 0>;
@@ -140,3 +57,84 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <25000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x4000>;
+ read-only;
+ };
+
+ factory: partition@34000 {
+ label = "factory";
+ reg = <0x34000 0x4000>;
+ read-only;
+ };
+
+ partition@38000 {
+ label = "nvram";
+ reg = <0x38000 0x8000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devdata";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 0>;
+ };
+};
+
+&wmac {
+ ralink,5ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/DIR-810L.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-810L.dts
+++ head/sys/gnu/dts/mips/DIR-810L.dts
@@ -1,101 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
model = "D-Link DIR-810L";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- factory5g: partition@50000 {
- label = "factory5g";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "Wolf_Config";
- reg = <0x60000 0x10000>;
- read-only;
- };
-
- partition@70000 {
- label = "MyDlink";
- reg = <0x70000 0x80000>;
- read-only;
- };
-
- partition@e0000 {
- label = "Jffs2";
- reg = <0xe0000 0x80000>;
- read-only;
- };
-
- partition@170000 {
- label = "firmware";
- reg = <0x170000 0x690000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -134,3 +44,91 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ factory5g: partition@50000 {
+ label = "factory5g";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "Wolf_Config";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "MyDlink";
+ reg = <0x70000 0x80000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "Jffs2";
+ reg = <0xe0000 0x80000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "firmware";
+ reg = <0x170000 0x690000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/DIR-860L-B1.dts
===================================================================
--- head/sys/gnu/dts/mips/DIR-860L-B1.dts
+++ head/sys/gnu/dts/mips/DIR-860L-B1.dts
@@ -15,87 +15,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x4000>;
- read-only;
- };
-
- radio: partition@34000 {
- label = "radio";
- reg = <0x34000 0x4000>;
- read-only;
- };
-
- factory: partition@38000 {
- label = "factory";
- reg = <0x38000 0x8000>;
- read-only;
- };
-
- partition@40000 {
- label = "defaults";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
- };
-
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&radio 0x2000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&radio 0>;
- mediatek,5ghz = <0>;
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -127,3 +46,82 @@
poll-interval = <20>;
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x4000>;
+ read-only;
+ };
+
+ radio: partition@34000 {
+ label = "radio";
+ reg = <0x34000 0x4000>;
+ read-only;
+ };
+
+ factory: partition@38000 {
+ label = "factory";
+ reg = <0x38000 0x8000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "defaults";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&radio 0x2000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&radio 0>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/E1700.dts
===================================================================
--- head/sys/gnu/dts/mips/E1700.dts
+++ head/sys/gnu/dts/mips/E1700.dts
@@ -10,115 +10,12 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "linksys,e1700", "ralink,mt7620a-soc";
model = "Linksys E1700";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- status = "okay";
- mtd-mac-address = <&factory 0x28>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
- };
- };
- };
-
- gsw@10110000 {
- mediatek,port4 = "gmac";
- mediatek,mt7530 = <1>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -152,3 +49,104 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x28>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+ mediatek,mt7530 = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/ESR-9753.dts
===================================================================
--- head/sys/gnu/dts/mips/ESR-9753.dts
+++ head/sys/gnu/dts/mips/ESR-9753.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "ESR-9753", "ralink,rt3052-soc";
model = "Senao / EnGenius ESR-9753";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -79,16 +70,25 @@
linux,code = <0x211>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
};
Index: head/sys/gnu/dts/mips/EX2700.dts
===================================================================
--- head/sys/gnu/dts/mips/EX2700.dts
+++ head/sys/gnu/dts/mips/EX2700.dts
@@ -10,7 +10,7 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
@@ -20,73 +20,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus@10000000 {
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio1: gpio@638 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0x3b0000>;
- };
-
- art: partition@3f0000 {
- label = "art";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&art 0x0>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&art 0x1000>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- // spi refclk: pins 37, 38, 39
- // uartf: pins 8, 9, 10, 11, 12, 13, 14
- // i2c: pins 1, 2
- ralink,group = "i2c", "uartf", "spi refclk";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -146,3 +79,67 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x3b0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&art 0x1000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ // spi refclk: pins 37, 38, 39
+ // uartf: pins 8, 9, 10, 11, 12, 13, 14
+ // i2c: pins 1, 2
+ ralink,group = "i2c", "uartf", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/F5D8235_V1.dts
===================================================================
--- head/sys/gnu/dts/mips/F5D8235_V1.dts
+++ head/sys/gnu/dts/mips/F5D8235_V1.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
/ {
#address-cells = <1>;
@@ -8,21 +8,6 @@
compatible = "F5D8235_V1", "ralink,rt2880-soc";
model = "Belkin F5D8235 v1";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -55,21 +40,6 @@
};
};
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- };
- };
-
- /* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */
-/* wmac@480000 {
- status = "okay";
- ralink,mtd-eeprom = <&u-boot 0x40000>;
- };
-*/
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio0 1 0>;
@@ -109,3 +79,33 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+};
+
+/* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */
+/*&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&u-boot 0x40000>;
+};
+*/
+
Index: head/sys/gnu/dts/mips/F5D8235_V2.dts
===================================================================
--- head/sys/gnu/dts/mips/F5D8235_V2.dts
+++ head/sys/gnu/dts/mips/F5D8235_V2.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "F5D8235_V2", "ralink,rt3052-soc";
model = "Belkin F5D8235 v2";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -45,22 +36,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&uboot 0x40004>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&uboot 0x40000>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-
rtl8366rb {
compatible = "rtl8366rb";
gpio-sda = <&gpio0 1 0>;
@@ -116,3 +91,28 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&uboot 0x40004>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&uboot 0x40000>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/F7C027.dts
===================================================================
--- head/sys/gnu/dts/mips/F7C027.dts
+++ head/sys/gnu/dts/mips/F7C027.dts
@@ -1,87 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "F7C027", "ralink,rt5350-soc";
model = "Belkin F7C027";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l12805d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x770000>;
- };
-
- partition@7c0000 {
- label = "firmware2";
- reg = <0x7c0000 0x770000>;
- };
-
- partition@f30000 {
- label = "belkin_settings";
- reg = <0xf30000 0xa0000>;
- };
-
- partition@fd0000 {
- label = "unknown";
- reg = <0xfd0000 0x10000>;
- };
-
- partition@fe0000 {
- label = "nvram";
- reg = <0xfe0000 0x10000>;
- };
-
- partition@ff0000 {
- label = "user_factory";
- reg = <0xff0000 0x10000>;
- };
- };
- };
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -131,3 +55,77 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l12805d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x770000>;
+ };
+
+ partition@7c0000 {
+ label = "firmware2";
+ reg = <0x7c0000 0x770000>;
+ };
+
+ partition@f30000 {
+ label = "belkin_settings";
+ reg = <0xf30000 0xa0000>;
+ };
+
+ partition@fd0000 {
+ label = "unknown";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ partition@fe0000 {
+ label = "nvram";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition@ff0000 {
+ label = "user_factory";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/FIREWRT.dts
===================================================================
--- head/sys/gnu/dts/mips/FIREWRT.dts
+++ head/sys/gnu/dts/mips/FIREWRT.dts
@@ -15,74 +15,6 @@
bootargs = "console=ttyS0,57600";
};
- sdhci@10130000 {
- status = "okay";
- };
-
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
- };
-
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
- };
- };
-
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0xe000>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -110,13 +42,79 @@
linux,code = <116>;
};
};
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "rgmii2";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii2";
+ ralink,function = "gpio";
};
};
};
Index: head/sys/gnu/dts/mips/FONERA20N.dts
===================================================================
--- head/sys/gnu/dts/mips/FONERA20N.dts
+++ head/sys/gnu/dts/mips/FONERA20N.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "FONERA20N", "ralink,rt3052-soc";
model = "La Fonera 2.0N";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -85,50 +76,59 @@
linux,input-type = <5>; /* EV_SW */
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
-
- port@0 {
- compatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <0 4>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
- port@1 {
- compatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <1 3>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
- port@2 {
- compatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <2 2>;
- };
+ port@0 {
+ compatible = "swconfig,port";
+ swconfig,segment = "lan";
+ swconfig,portmap = <0 4>;
+ };
- port@3 {
- compatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <3 1>;
- };
+ port@1 {
+ compatible = "swconfig,port";
+ swconfig,segment = "lan";
+ swconfig,portmap = <1 3>;
+ };
- port@4 {
- compatible = "swconfig,port";
- swconfig,segment = "wan";
- swconfig,portmap = <4 0>;
- };
+ port@2 {
+ compatible = "swconfig,port";
+ swconfig,segment = "lan";
+ swconfig,portmap = <2 2>;
};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
+ port@3 {
+ compatible = "swconfig,port";
+ swconfig,segment = "lan";
+ swconfig,portmap = <3 1>;
};
- otg@101c0000 {
- status = "okay";
+ port@4 {
+ compatible = "swconfig,port";
+ swconfig,segment = "wan";
+ swconfig,portmap = <4 0>;
};
};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/FREESTATION5.dts
===================================================================
--- head/sys/gnu/dts/mips/FREESTATION5.dts
+++ head/sys/gnu/dts/mips/FREESTATION5.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "FREESTATION5", "ralink,rt3050-soc";
@@ -10,15 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -51,22 +42,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x01>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-
gpio-export {
compatible = "gpio-export";
@@ -100,3 +75,28 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x01>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/GL-MT300A.dts
===================================================================
--- head/sys/gnu/dts/mips/GL-MT300A.dts
+++ head/sys/gnu/dts/mips/GL-MT300A.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "GL-MT300A", "ralink,mt7620a-soc";
@@ -10,109 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25q128";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x10000>;
- };
- };
- };
- };
-
- sdhci@10130000 {
- status = "okay";
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4000>;
- ralink,port-map = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled","ephy","uartf","i2c";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -162,3 +59,104 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4000>;
+ ralink,port-map = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","uartf","i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/GL-MT300N.dts
===================================================================
--- head/sys/gnu/dts/mips/GL-MT300N.dts
+++ head/sys/gnu/dts/mips/GL-MT300N.dts
@@ -1,112 +1,15 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620a.dtsi"
/ {
- compatible = "GL-MT300N", "ralink,mt7620n-soc";
+ compatible = "GL-MT300N", "ralink,mt7620a-soc";
model = "GL-MT300N";
chosen {
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25q128";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x10000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4000>;
- ralink,port-map = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled","ephy","i2c";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -151,3 +54,98 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4000>;
+ ralink,port-map = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/GL-MT750.dts
===================================================================
--- head/sys/gnu/dts/mips/GL-MT750.dts
+++ head/sys/gnu/dts/mips/GL-MT750.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "GL-MT750", "ralink,mt7620a-soc";
@@ -10,109 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25q128";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x10000>;
- };
- };
- };
- };
-
- sdhci@10130000 {
- status = "okay";
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4000>;
- ralink,port-map = "llllw";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled","ephy","uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -157,3 +54,104 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4000>;
+ ralink,port-map = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/HC5661.dts
===================================================================
--- head/sys/gnu/dts/mips/HC5661.dts
+++ head/sys/gnu/dts/mips/HC5661.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "HC5XXX.dtsi"
+#include "HC5XXX.dtsi"
/ {
compatible = "HC5661", "ralink,mt7620a-soc";
Index: head/sys/gnu/dts/mips/HC5761.dts
===================================================================
--- head/sys/gnu/dts/mips/HC5761.dts
+++ head/sys/gnu/dts/mips/HC5761.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "HC5XXX.dtsi"
+#include "HC5XXX.dtsi"
/ {
compatible = "HC5761", "ralink,mt7620a-soc";
Index: head/sys/gnu/dts/mips/HC5861.dts
===================================================================
--- head/sys/gnu/dts/mips/HC5861.dts
+++ head/sys/gnu/dts/mips/HC5861.dts
@@ -1,49 +1,11 @@
/dts-v1/;
-/include/ "HC5XXX.dtsi"
+#include "HC5XXX.dtsi"
/ {
compatible = "HC5861", "ralink,mt7620a-soc";
model = "HiWiFi HC5861";
- ethernet@10100000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "wllll";
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
- };
-
- gsw@10110000 {
- mediatek,port4 = "gmac";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -90,3 +52,41 @@
};
};
};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "wllll";
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
Index: head/sys/gnu/dts/mips/HC5XXX.dtsi
===================================================================
--- head/sys/gnu/dts/mips/HC5XXX.dtsi
+++ head/sys/gnu/dts/mips/HC5XXX.dtsi
@@ -1,120 +1,10 @@
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- sysc@0 {
- ralink,gpiomux = "i2c", "jtag";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@fd0000 {
- label = "hwf_config";
- reg = <0xfd0000 0x10000>;
- };
-
- bdinfo: partition@fe0000 {
- label = "bdinfo";
- reg = <0xfe0000 0x10000>;
- };
-
- partition@ff0000 {
- label = "backup";
- reg = <0xff0000 0x10000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- sdhci@10130000 {
- status = "okay";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "wled", "nd_sd";
- ralink,function = "gpio";
- };
-
- pa {
- ralink,group = "pa";
- ralink,function = "pa";
- };
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -139,3 +29,111 @@
};
};
};
+
+&sysc {
+ ralink,gpiomux = "i2c", "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "hwf_config";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ bdinfo: partition@fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition@ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default {
+ gpio {
+ ralink,group = "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/HG255D.dts
===================================================================
--- head/sys/gnu/dts/mips/HG255D.dts
+++ head/sys/gnu/dts/mips/HG255D.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "HG255D", "ralink,rt3052-soc";
model = "HuaWei HG255D";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x1000000>;
@@ -111,20 +102,29 @@
linux,code = <0xf7>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/HLKRM04.dts
===================================================================
--- head/sys/gnu/dts/mips/HLKRM04.dts
+++ head/sys/gnu/dts/mips/HLKRM04.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "HLKRM04", "ralink,rt5350-soc";
@@ -15,78 +15,6 @@
bootargs = "console=ttyS1,57600";
};
- palmbus@10000000 {
- uart@500 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag";
- ralink,function = "gpio";
- };
-
- uartf_gpio {
- ralink,group = "uartf";
- ralink,function = "gpio uartf";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
@@ -123,3 +51,73 @@
};
};
};
+
+&uart {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag";
+ ralink,function = "gpio";
+ };
+
+ uartf_gpio {
+ ralink,group = "uartf";
+ ralink,function = "gpio uartf";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/HPM.dts
===================================================================
--- head/sys/gnu/dts/mips/HPM.dts
+++ head/sys/gnu/dts/mips/HPM.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
/ {
compatible = "HPM", "ralink,rt3883-soc";
@@ -10,78 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <25000000>;
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "config";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
-
- partition@50000 {
- reg = <0x00050000 0x00fb0000>;
- label = "firmware";
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
- mtd-mac-address = <&factory 0x28>;
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@4 {
- reg = <4>;
- };
- };
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -147,3 +75,73 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "config";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition@50000 {
+ reg = <0x00050000 0x00fb0000>;
+ label = "firmware";
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+ mtd-mac-address = <&factory 0x28>;
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/HT-TM02.dts
===================================================================
--- head/sys/gnu/dts/mips/HT-TM02.dts
+++ head/sys/gnu/dts/mips/HT-TM02.dts
@@ -1,82 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "HT-TM02", "ralink,rt5350-soc";
model = "HooToo HT-TM02";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x10>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -111,3 +40,73 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x10>;
+ mediatek,portdisable = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/HW550-3G.dts
===================================================================
--- head/sys/gnu/dts/mips/HW550-3G.dts
+++ head/sys/gnu/dts/mips/HW550-3G.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "HW550-3G", "ralink,rt3052-soc";
model = "Aztech HW550-3G";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -107,8 +86,29 @@
linux,code = <0x211>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/IP2202.dts
===================================================================
--- head/sys/gnu/dts/mips/IP2202.dts
+++ head/sys/gnu/dts/mips/IP2202.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "IP2202", "ralink,rt3052-soc";
model = "Poray IP2202";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,14 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -81,8 +64,25 @@
linux,code = <0x198>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/JHR-N805R.dts
===================================================================
--- head/sys/gnu/dts/mips/JHR-N805R.dts
+++ head/sys/gnu/dts/mips/JHR-N805R.dts
@@ -1,70 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "JHR-N805R", "ralink,rt3050-soc";
model = "JCG JHR-N805R";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x2e>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -87,3 +28,60 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x2e>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/JHR-N825R.dts
===================================================================
--- head/sys/gnu/dts/mips/JHR-N825R.dts
+++ head/sys/gnu/dts/mips/JHR-N825R.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "JHR-N825R", "ralink,rt3052-soc";
model = "JCG JHR-N825R";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x2e>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
system {
@@ -79,3 +58,24 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x2e>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/JHR-N926R.dts
===================================================================
--- head/sys/gnu/dts/mips/JHR-N926R.dts
+++ head/sys/gnu/dts/mips/JHR-N926R.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "JHR-N926R", "ralink,rt3052-soc";
model = "JCG JHR-N926R";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x2e>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -125,3 +104,24 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x2e>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/LINKIT7688.dts
===================================================================
--- head/sys/gnu/dts/mips/LINKIT7688.dts
+++ head/sys/gnu/dts/mips/LINKIT7688.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7628an.dtsi"
+#include "mt7628an.dtsi"
/ {
compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
@@ -10,133 +10,15 @@
bootargs = "console=ttyS2,57600";
};
+ aliases {
+ serial0 = &uart2;
+ };
+
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "gpio";
- ralink,function = "gpio";
- };
-
- perst {
- ralink,group = "perst";
- ralink,function = "gpio";
- };
-
- refclk {
- ralink,group = "refclk";
- ralink,function = "gpio";
- };
-
- i2s {
- ralink,group = "i2s";
- ralink,function = "gpio";
- };
-
- spis {
- ralink,group = "spis";
- ralink,function = "gpio";
- };
-
- wled_kn {
- ralink,group = "wled_kn";
- ralink,function = "gpio";
- };
-
- wled_an {
- ralink,group = "wled_an";
- ralink,function = "wled_an";
- };
-
- wdt {
- ralink,group = "wdt";
- ralink,function = "gpio";
- };
- };
- };
-
- wmac@10300000 {
- status = "okay";
- };
-
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l25635e";
- spi-max-frequency = <40000000>;
- m25p,chunked-io = <31>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
-
- spidev@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spidev";
- reg = <1 0>;
- spi-max-frequency = <40000000>;
- };
- };
-
- i2c@900 {
- status = "okay";
- };
-
- uart1@d00 {
- status = "okay";
- };
-
- uart2@e00 {
- status = "okay";
- };
-
- pwm@5000 {
- status = "okay";
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- sdhci@10130000 {
- status = "okay";
- mediatek,cd-high;
- };
-
bootstrap {
compatible = "mediatek,linkit";
@@ -145,7 +27,7 @@
gpio-leds {
compatible = "gpio-leds";
-
+
wifi {
label = "mediatek:orange:wifi";
gpios = <&wgpio 0 0>;
@@ -158,7 +40,7 @@
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
-
+
wps {
label = "reset";
gpios = <&gpio1 6 1>;
@@ -173,5 +55,128 @@
gpio-controller;
#gpio-cells = <2>;
};
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio";
+ ralink,function = "gpio";
+ };
+
+ perst {
+ ralink,group = "perst";
+ ralink,function = "gpio";
+ };
+
+ refclk {
+ ralink,group = "refclk";
+ ralink,function = "gpio";
+ };
+
+ i2s {
+ ralink,group = "i2s";
+ ralink,function = "gpio";
+ };
+
+ spis {
+ ralink,group = "spis";
+ ralink,function = "gpio";
+ };
+
+ wled_kn {
+ ralink,group = "wled_kn";
+ ralink,function = "gpio";
+ };
+
+ wled_an {
+ ralink,group = "wled_an";
+ ralink,function = "wled_an";
+ };
+
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l25635e";
+ spi-max-frequency = <40000000>;
+ m25p,chunked-io = <31>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+
+ spidev@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spidev";
+ reg = <1 0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-high;
+};
+&wmac {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/M2M.dts
===================================================================
--- head/sys/gnu/dts/mips/M2M.dts
+++ head/sys/gnu/dts/mips/M2M.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "M2M", "ralink,rt5350-soc";
@@ -10,53 +10,6 @@
bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
};
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "Bootloader";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "Config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "Factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -89,24 +42,69 @@
linux,code = <0x198>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
+&spi0 {
+ status = "okay";
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
- ehci@101c0000 {
- status = "okay";
- };
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- ohci@101c1000 {
- status = "okay";
+ partition@30000 {
+ label = "Config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "Factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0x0>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
Index: head/sys/gnu/dts/mips/M3.dts
===================================================================
--- head/sys/gnu/dts/mips/M3.dts
+++ head/sys/gnu/dts/mips/M3.dts
@@ -1,67 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "M3", "ralink,rt5350-soc";
model = "Poray M3";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q32";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -90,17 +34,71 @@
linux,input-type = <5>;
};
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
- };
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q32";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- ehci@101c0000 {
- status = "okay";
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
};
+};
- ohci@101c1000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/M4-4M.dts
===================================================================
--- head/sys/gnu/dts/mips/M4-4M.dts
+++ head/sys/gnu/dts/mips/M4-4M.dts
@@ -1,67 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "M4", "ralink,rt5350-soc";
model = "Poray M4";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "pm25lq032";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -83,12 +27,66 @@
linux,code = <0x198>;
};
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "pm25lq032";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- ehci@101c0000 {
- status = "okay";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
};
+};
- ohci@101c1000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/M4-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/M4-8M.dts
+++ head/sys/gnu/dts/mips/M4-8M.dts
@@ -1,67 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "M4", "ralink,rt5350-soc";
model = "Poray M4";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "gd25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -83,17 +27,71 @@
linux,code = <0x198>;
};
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
- };
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "gd25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- ehci@101c0000 {
- status = "okay";
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
+};
- ohci@101c1000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MINIEMBPLUG.dts
===================================================================
--- head/sys/gnu/dts/mips/MINIEMBPLUG.dts
+++ head/sys/gnu/dts/mips/MINIEMBPLUG.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "MINIEMBPLUG", "ralink,rt5350-soc";
model = "Omnima MiniEMBPlug";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -59,62 +50,73 @@
linux,code = <0x211>;
};
};
+};
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
+&gpio0 {
+ status = "okay";
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&spi0 {
+ status = "okay";
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- otg@101c0000 {
- status = "okay";
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MINIEMBWIFI.dts
===================================================================
--- head/sys/gnu/dts/mips/MINIEMBWIFI.dts
+++ head/sys/gnu/dts/mips/MINIEMBWIFI.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "MINIEMBWIFI", "ralink,rt3052-soc";
model = "Omnima MiniEMBWiFi";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -73,20 +64,29 @@
reg = <0x50000 0x7b0000>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/MIWIFI-MINI.dts
===================================================================
--- head/sys/gnu/dts/mips/MIWIFI-MINI.dts
+++ head/sys/gnu/dts/mips/MIWIFI-MINI.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
@@ -10,146 +10,144 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
+ gpio-leds {
+ compatible = "gpio-leds";
- gpio1: gpio@638 {
- status = "okay";
+ blue {
+ label = "miwifi-mini:blue:status";
+ gpios = <&gpio1 0 1>;
};
- gpio2: gpio@660 {
- status = "okay";
+ yellow {
+ label = "miwifi-mini:yellow:status";
+ gpios = <&gpio1 2 1>;
};
- spi@b00 {
- status = "okay";
+ red {
+ label = "miwifi-mini:red:status";
+ gpios = <&gpio1 5 1>;
+ };
+ };
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 0>;
+ linux,code = <0x198>;
+ };
+ };
+};
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
+&gpio0 {
+ status = "okay";
+};
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
+&gpio1 {
+ status = "okay";
+};
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
+&gpio2 {
+ status = "okay";
+};
- partition@fd0000 {
- label = "crash";
- reg = <0xfd0000 0x10000>;
- };
+&spi0 {
+ status = "okay";
- partition@fe0000 {
- label = "reserved";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
- partition@ff0000 {
- label = "Bdata";
- reg = <0xff0000 0x10000>;
- };
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
};
- };
- ehci@101c0000 {
- status = "okay";
- };
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- ohci@101c1000 {
- status = "okay";
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+ partition@fd0000 {
+ label = "crash";
+ reg = <0xfd0000 0x10000>;
+ };
- pcie@10140000 {
- status = "okay";
+ partition@fe0000 {
+ label = "reserved";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
+ partition@ff0000 {
+ label = "Bdata";
+ reg = <0xff0000 0x10000>;
};
};
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "rgmii1";
- ralink,function = "gpio";
- };
+&ehci {
+ status = "okay";
+};
- pa {
- ralink,group = "pa";
- ralink,function = "pa";
- };
- };
- };
+&ohci {
+ status = "okay";
+};
- gpio-leds {
- compatible = "gpio-leds";
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
- blue {
- label = "miwifi-mini:blue:status";
- gpios = <&gpio1 0 1>;
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
- yellow {
- label = "miwifi-mini:yellow:status";
- gpios = <&gpio1 2 1>;
- };
+&pcie {
+ status = "okay";
- red {
- label = "miwifi-mini:red:status";
- gpios = <&gpio1 5 1>;
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
};
};
+};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "rgmii1";
+ ralink,function = "gpio";
+ };
- reset {
- label = "reset";
- gpios = <&gpio1 6 0>;
- linux,code = <0x198>;
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
};
};
};
Index: head/sys/gnu/dts/mips/MIWIFI-NANO.dts
===================================================================
--- head/sys/gnu/dts/mips/MIWIFI-NANO.dts
+++ head/sys/gnu/dts/mips/MIWIFI-NANO.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7628an.dtsi"
+#include "mt7628an.dtsi"
/ {
compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc";
@@ -15,15 +15,6 @@
reg = <0x0 0x4000000>;
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "refclk", "wled", "gpio";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -44,48 +35,54 @@
};
};
+};
-
- wmac@10300000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "refclk", "wled", "gpio";
+ ralink,function = "gpio";
+ };
};
+};
+
+&wmac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
- m25p,chunked-io = <32>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
};
Index: head/sys/gnu/dts/mips/MLW221.dts
===================================================================
--- head/sys/gnu/dts/mips/MLW221.dts
+++ head/sys/gnu/dts/mips/MLW221.dts
@@ -1,92 +1,11 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "mlw221", "ralink,mt7620n-soc";
model = "Kingston MLW221";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl129p1";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf60000>;
- };
-
- partition@fb0000 {
- label = "user-config";
- reg = <0xfb0000 0x50000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -120,3 +39,82 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl129p1";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "user-config";
+ reg = <0xfb0000 0x50000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/MLWG2.dts
===================================================================
--- head/sys/gnu/dts/mips/MLWG2.dts
+++ head/sys/gnu/dts/mips/MLWG2.dts
@@ -1,92 +1,11 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "mlwg2", "ralink,mt7620n-soc";
model = "Kingston MLWG2";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf60000>;
- };
-
- partition@fb0000 {
- label = "user-config";
- reg = <0xfb0000 0x50000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -120,3 +39,82 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "user-config";
+ reg = <0xfb0000 0x50000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/MOFI3500-3GN.dts
===================================================================
--- head/sys/gnu/dts/mips/MOFI3500-3GN.dts
+++ head/sys/gnu/dts/mips/MOFI3500-3GN.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "MOFI3500-3GN", "ralink,rt3052-soc";
model = "MoFi Network MOFI3500-3GN";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,10 +38,6 @@
};
};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -99,13 +86,26 @@
linux,code = <0x211>;
};
};
+};
- wmac@10180000 {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- otg@101c0000 {
- status = "okay";
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/MPRA1.dts
===================================================================
--- head/sys/gnu/dts/mips/MPRA1.dts
+++ head/sys/gnu/dts/mips/MPRA1.dts
@@ -1,82 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "MPRA1", "ralink,rt5350-soc";
model = "HAME MPR-A1";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- gpio1: gpio@660 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -121,3 +50,72 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MPRA2.dts
===================================================================
--- head/sys/gnu/dts/mips/MPRA2.dts
+++ head/sys/gnu/dts/mips/MPRA2.dts
@@ -1,78 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "MPRA2", "ralink,rt5350-soc";
model = "HAME MPR-A2";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -117,3 +50,68 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MR-102N.dts
===================================================================
--- head/sys/gnu/dts/mips/MR-102N.dts
+++ head/sys/gnu/dts/mips/MR-102N.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "MR-102N", "ralink,rt3052-soc";
model = "AXIMCom MR-102N";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -57,20 +48,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- status = "okay";
- #mediatek,portmap = <0x3e>;
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -108,8 +85,32 @@
linux,code = <0x211>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ status = "okay";
+ #mediatek,portmap = <0x3e>;
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MT7620a.dts
===================================================================
--- head/sys/gnu/dts/mips/MT7620a.dts
+++ head/sys/gnu/dts/mips/MT7620a.dts
@@ -1,127 +1,125 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a + MT7610e evaluation board";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+ gpio-keys-polled {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ s2 {
+ label = "S2";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x100>;
};
- };
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
+ s3 {
+ label = "S3";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x101>;
};
};
+};
- ethernet@10100000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
+&spi0 {
+ status = "okay";
- port@4 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&phy4>;
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
- port@5 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- mdio-bus {
- status = "okay";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
+};
- gsw@10110000 {
- mediatek,port4 = "gmac";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
+
+&ethernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
- sdhci@10130000 {
+ port@4 {
status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
};
- pcie@10140000 {
+ port@5 {
status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
};
- gpio-keys-polled {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
+ mdio-bus {
+ status = "okay";
- s2 {
- label = "S2";
- gpios = <&gpio0 1 1>;
- linux,code = <0x100>;
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
};
- s3 {
- label = "S3";
- gpios = <&gpio0 2 1>;
- linux,code = <0x101>;
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
};
};
+};
- ehci@101c0000 {
- status = "okay";
- };
+&gsw {
+ mediatek,port4 = "gmac";
+};
- ohci@101c1000 {
- status = "okay";
- };
+&sdhci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/MT7620a_MT7530.dts
===================================================================
--- head/sys/gnu/dts/mips/MT7620a_MT7530.dts
+++ head/sys/gnu/dts/mips/MT7620a_MT7530.dts
@@ -1,119 +1,117 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a + MT7530 evaluation board";
+};
+
+&spi0 {
+ status = "okay";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- };
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
};
- };
- ethernet@10100000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
};
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
- };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
+};
- gsw@10110000 {
- mediatek,port4 = "gmac";
- mediatek,mt7530 = <1>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- pcie@10140000 {
- status = "okay";
- };
+&ethernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
- ehci@101c0000 {
+ port@5 {
status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
};
- ohci@101c1000 {
+ mdio-bus {
status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
};
};
+
+&gsw {
+ mediatek,port4 = "gmac";
+ mediatek,mt7530 = <1>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MT7620a_MT7610e.dts
===================================================================
--- head/sys/gnu/dts/mips/MT7620a_MT7610e.dts
+++ head/sys/gnu/dts/mips/MT7620a_MT7610e.dts
@@ -1,72 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620A evaluation board";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <1000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- ethernet@10100000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mediatek,portmap = "llllw";
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- };
-
- sdhci@10130000 {
- status = "okay";
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
gpio-keys-polled {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -86,3 +25,62 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <1000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MT7620a_V22SG.dts
===================================================================
--- head/sys/gnu/dts/mips/MT7620a_V22SG.dts
+++ head/sys/gnu/dts/mips/MT7620a_V22SG.dts
@@ -1,69 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a V22SG High Power evaluation board";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "spi";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
- };
-
- gsw@10110000 {
- mediatek,port4 = "gmac";
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -112,3 +54,61 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "spi";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MT7621.dts
===================================================================
--- head/sys/gnu/dts/mips/MT7621.dts
+++ head/sys/gnu/dts/mips/MT7621.dts
@@ -15,23 +15,6 @@
bootargs = "console=ttyS0,57600";
};
- sdhci@10130000 {
- status = "okay";
- };
-
- xhci@1E1C0000 {
- status = "okay";
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
- ralink,function = "gpio";
- };
- };
- };
-
nand@1e003000 {
partition@0 {
label = "uboot";
@@ -54,3 +37,20 @@
};
};
};
+
+&sdhci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/MT7628.dts
===================================================================
--- head/sys/gnu/dts/mips/MT7628.dts
+++ head/sys/gnu/dts/mips/MT7628.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7628an.dtsi"
+#include "mt7628an.dtsi"
/ {
compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
@@ -10,56 +10,58 @@
device_type = "memory";
reg = <0x0 0x2000000>;
};
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag";
+ ralink,function = "gpio";
};
};
+};
- wmac@10300000 {
- status = "okay";
- };
+&wmac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
- m25p,chunked-io = <32>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
};
+
+&wmac {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MZK-750DHP.dts
===================================================================
--- head/sys/gnu/dts/mips/MZK-750DHP.dts
+++ head/sys/gnu/dts/mips/MZK-750DHP.dts
@@ -1,93 +1,28 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex MZK-750DHP";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi refclk", "rgmii1";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
wps {
label = "mzk-750dhp:green:wps";
- gpios = <&gpio1 11 1>;
+ gpios = <&gpio2 15 1>;
};
power {
label = "mzk-750dhp:green:power";
gpios = <&gpio1 15 1>;
};
+
+ wlan5g {
+ label = "mzk-750dhp:green:wlan5g";
+ gpios = <&gpio1 14 1>;
+ };
};
gpio-keys-polled {
@@ -99,13 +34,94 @@
s1 {
label = "reset";
gpios = <&gpio0 1 1>;
- linux,code = <0x100>;
+ linux,code = <0x198>;
};
s2 {
label = "wps";
- gpios = <&gpio0 2 1>;
+ gpios = <&gpio2 19 1>;
linux,code = <0x211>;
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/MZK-DP150N.dts
===================================================================
--- head/sys/gnu/dts/mips/MZK-DP150N.dts
+++ head/sys/gnu/dts/mips/MZK-DP150N.dts
@@ -1,81 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "MZK-DP150N", "ralink,rt5350-soc";
model = "Planex MZK-DP150N";
- palmbus@10000000 {
- gpio1: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
-
- spidev@1 {
- compatible = "linux,spidev";
- spi-max-frequency = <10000000>;
- reg = <1>;
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x17>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -98,3 +28,71 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+
+ spidev@1 {
+ compatible = "linux,spidev";
+ spi-max-frequency = <10000000>;
+ reg = <1 0>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
Index: head/sys/gnu/dts/mips/MZK-EX300NP.dts
===================================================================
--- head/sys/gnu/dts/mips/MZK-EX300NP.dts
+++ head/sys/gnu/dts/mips/MZK-EX300NP.dts
@@ -0,0 +1,130 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Planex MZK-EX300NP";
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "mzk-ex300np:green:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+
+ wps {
+ label = "mzk-ex300np:green:wps";
+ gpios = <&gpio1 5 1>;
+ };
+
+ rep {
+ label = "mzk-ex300np:blue:rep";
+ gpios = <&gpio1 4 1>;
+ };
+
+ wifi1 {
+ label = "mzk-ex300np:blue:wifi1";
+ gpios = <&gpio1 1 1>;
+ };
+
+ wifi2 {
+ label = "mzk-ex300np:blue:wifi2";
+ gpios = <&gpio1 2 1>;
+ };
+
+ wifi3 {
+ label = "mzk-ex300np:blue:wifi3";
+ gpios = <&gpio1 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 3 0>;
+ linux,code = <0x211>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x730000>;
+ };
+
+ partition@780000 {
+ label = "Udata";
+ reg = <0x780000 0x80000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/MZK-EX750NP.dts
===================================================================
--- head/sys/gnu/dts/mips/MZK-EX750NP.dts
+++ head/sys/gnu/dts/mips/MZK-EX750NP.dts
@@ -0,0 +1,148 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Planex MZK-EX750NP";
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "mzk-ex750np:red:power";
+ gpios = <&gpio0 14 1>;
+ };
+
+ wifi {
+ label = "mzk-ex750np:red:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+
+ wps {
+ label = "mzk-ex750np:green:wps";
+ gpios = <&gpio0 10 1>;
+ };
+
+ rep {
+ label = "mzk-ex750np:blue:rep";
+ gpios = <&gpio2 16 1>;
+ };
+
+ wifi1 {
+ label = "mzk-ex750np:blue:wifi1";
+ gpios = <&gpio2 19 1>;
+ };
+
+ wifi2 {
+ label = "mzk-ex750np:blue:wifi2";
+ gpios = <&gpio2 18 1>;
+ };
+
+ wifi3 {
+ label = "mzk-ex750np:blue:wifi3";
+ gpios = <&gpio2 17 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 9 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 13 0>;
+ linux,code = <0x211>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x730000>;
+ };
+
+ partition@780000 {
+ label = "Udata";
+ reg = <0x780000 0x80000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/MZK-W300NH2.dts
===================================================================
--- head/sys/gnu/dts/mips/MZK-W300NH2.dts
+++ head/sys/gnu/dts/mips/MZK-W300NH2.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "MZK-W300NH2", "ralink,rt3052-soc";
model = "Planex MZK-W300NH2";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -53,18 +44,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -109,3 +88,24 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/MZK-WDPR.dts
===================================================================
--- head/sys/gnu/dts/mips/MZK-WDPR.dts
+++ head/sys/gnu/dts/mips/MZK-WDPR.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "MZK-WDPR", "ralink,rt3052-soc";
@@ -10,15 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -58,22 +49,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-
gpio-export {
compatible = "gpio-export";
@@ -84,3 +59,28 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/MicroWRT.dts
===================================================================
--- head/sys/gnu/dts/mips/MicroWRT.dts
+++ head/sys/gnu/dts/mips/MicroWRT.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "microwrt", "ralink,mt7620a-soc";
@@ -10,84 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x20000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0xfc0000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "wled", "i2c", "wdt", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -107,3 +29,79 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot-env";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0xfc0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "wled", "i2c", "wdt", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/NA930.dts
===================================================================
--- head/sys/gnu/dts/mips/NA930.dts
+++ head/sys/gnu/dts/mips/NA930.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
@@ -10,34 +10,6 @@
bootargs = "console=ttyS1,57600";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "rgmii2", "spi", "ephy";
- ralink,function = "gpio";
- };
-
- uartf_gpio {
- ralink,group = "uartf";
- ralink,function = "gpio uartf";
- };
- };
- };
-
- palmbus@10000000 {
- uart@500 {
- status = "okay";
- };
-
- gpio@638 {
- status = "okay";
- };
-
- gpio@660 {
- status = "okay";
- };
- };
-
nand {
#address-cells = <1>;
#size-cells = <1>;
@@ -67,39 +39,6 @@
};
};
- ethernet@10100000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -159,16 +98,75 @@
gpios = <&gpio0 13 0>;
};
};
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "rgmii2", "spi", "ephy";
+ ralink,function = "gpio";
+ };
- gsw@10110000 {
- mediatek,port4 = "gmac";
+ uartf_gpio {
+ ralink,group = "uartf";
+ ralink,function = "gpio uartf";
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&ethernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
};
- ehci@101c0000 {
+ port@5 {
status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
};
- ohci@101c1000 {
+ mdio-bus {
status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
};
};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/NBG-419N.dts
===================================================================
--- head/sys/gnu/dts/mips/NBG-419N.dts
+++ head/sys/gnu/dts/mips/NBG-419N.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "NBG-419N", "ralink,rt3052-soc";
model = "ZyXEL NBG-419N";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -92,3 +71,24 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/NCS601W.dts
===================================================================
--- head/sys/gnu/dts/mips/NCS601W.dts
+++ head/sys/gnu/dts/mips/NCS601W.dts
@@ -1,75 +1,73 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "NCS601W", "ralink,rt5350-soc";
model = "Wansview NCS601W";
+};
+
+&spi0 {
+ status = "okay";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- };
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
};
- };
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- esw@10110000 {
- mediatek,portmap = <0x2f>;
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- ehci@101c0000 {
- status = "okay";
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- ohci@101c1000 {
- status = "okay";
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/NW718.dts
===================================================================
--- head/sys/gnu/dts/mips/NW718.dts
+++ head/sys/gnu/dts/mips/NW718.dts
@@ -1,70 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "NW718", "ralink,rt3050-soc";
model = "Netcore NW718";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <25000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x20000>;
- read-only;
- };
-
- factory: partition@50000 {
- label = "factory";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "firmware";
- reg = <0x60000 0x3a0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -102,8 +43,65 @@
linux,code = <0x211>;
};
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <25000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- otg@101c0000 {
- status = "okay";
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@50000 {
+ label = "factory";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x60000 0x3a0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/OY-0001.dts
===================================================================
--- head/sys/gnu/dts/mips/OY-0001.dts
+++ head/sys/gnu/dts/mips/OY-0001.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
@@ -10,76 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
-
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mediatek,portmap = "llllw";
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -94,22 +24,6 @@
};
};
- sdhci@10130000 {
- status = "okay";
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -123,3 +37,86 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/PBR-M1.dts
===================================================================
--- head/sys/gnu/dts/mips/PBR-M1.dts
+++ head/sys/gnu/dts/mips/PBR-M1.dts
@@ -15,55 +15,8 @@
bootargs = "console=ttyS0,115200";
};
- sdhci@10130000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
- };
-
- xhci@1E1C0000 {
- status = "okay";
- };
-
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
-
- };
- };
-
- i2c@900 {
+ palmbus: palmbus@1E000000 {
+ i2c: i2c@900 {
compatible = "ralink,i2c-mt7621";
reg = <0x900 0x100>;
#address-cells = <1>;
@@ -80,32 +33,6 @@
};
};
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
- };
- };
-
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0xe000>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -175,13 +102,87 @@
compatible = "gpio-beeper";
gpios = <&gpio0 26 1>;
};
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "rgmii2", "jtag", "mdio";
- ralink,function = "gpio";
- };
+&sdhci {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+};
+
+&xhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
+ ralink,function = "gpio";
};
};
};
Index: head/sys/gnu/dts/mips/PSG1208.dts
===================================================================
--- head/sys/gnu/dts/mips/PSG1208.dts
+++ head/sys/gnu/dts/mips/PSG1208.dts
@@ -1,90 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "PSG1208", "ralink,mt7620a-soc";
model = "Phicomm PSG1208";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- pcie@10140000 {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -112,3 +33,80 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/PSR-680W.dts
===================================================================
--- head/sys/gnu/dts/mips/PSR-680W.dts
+++ head/sys/gnu/dts/mips/PSR-680W.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "PSR-680W", "ralink,rt3052-soc";
@@ -10,15 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -51,18 +42,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -84,8 +63,29 @@
linux,code = <0x198>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/PWH2004.dts
===================================================================
--- head/sys/gnu/dts/mips/PWH2004.dts
+++ head/sys/gnu/dts/mips/PWH2004.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "PWH2004", "ralink,rt3052-soc";
model = "Prolink PWH2004";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -73,12 +64,21 @@
linux,code = <0x198>;
};
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
};
Index: head/sys/gnu/dts/mips/PX-4885-4M.dts
===================================================================
--- head/sys/gnu/dts/mips/PX-4885-4M.dts
+++ head/sys/gnu/dts/mips/PX-4885-4M.dts
@@ -1,43 +1,39 @@
/dts-v1/;
-/include/ "PX-4885.dtsi"
+#include "PX-4885.dtsi"
-/ {
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "devdata";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "devdata";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
};
};
};
Index: head/sys/gnu/dts/mips/PX-4885-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/PX-4885-8M.dts
+++ head/sys/gnu/dts/mips/PX-4885-8M.dts
@@ -1,43 +1,39 @@
/dts-v1/;
-/include/ "PX-4885.dtsi"
+#include "PX-4885.dtsi"
-/ {
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "devdata";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "devdata";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
};
Index: head/sys/gnu/dts/mips/PX-4885.dtsi
===================================================================
--- head/sys/gnu/dts/mips/PX-4885.dtsi
+++ head/sys/gnu/dts/mips/PX-4885.dtsi
@@ -1,30 +1,9 @@
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "PX-4885", "ralink,rt5350-soc";
model = "7Links PX-4885";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -52,3 +31,24 @@
};
};
};
+
+&pinctrl {
+ state_default {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/RE6500.dts
===================================================================
--- head/sys/gnu/dts/mips/RE6500.dts
+++ head/sys/gnu/dts/mips/RE6500.dts
@@ -15,79 +15,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uart2", "uart3", "rgmii2";
- ralink,function = "gpio";
- };
- };
- };
-
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,5ghz = <0>;
- };
- };
- };
-
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0x2e>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -121,3 +48,74 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2", "uart3", "rgmii2";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x2e>;
+};
Index: head/sys/gnu/dts/mips/RP-N53.dts
===================================================================
--- head/sys/gnu/dts/mips/RP-N53.dts
+++ head/sys/gnu/dts/mips/RP-N53.dts
@@ -1,94 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "asus,rp-n53", "ralink,mt7620a-soc";
model = "Asus RP-N53";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
-
- i2c@900 {
- status = "okay";
- };
-
- i2s@a00 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pcm_i2s_pins>;
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- pcm@2000 {
- status = "okay";
- };
-
- gdma@2800 {
- status = "okay";
- };
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "mdio", "rgmii1";
- ralink,function = "gpio";
- };
- };
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -164,3 +81,84 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&i2s {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcm_i2s_pins>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pcm {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "mdio", "rgmii1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+};
+
+&pcie {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/RT-G32-B1.dts
===================================================================
--- head/sys/gnu/dts/mips/RT-G32-B1.dts
+++ head/sys/gnu/dts/mips/RT-G32-B1.dts
@@ -1,70 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "RT-G32-B1", "ralink,rt3050-soc";
model = "Asus RT-G32 B1";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- devconf: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&devconf 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&devconf 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -84,3 +25,60 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ devconf: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&devconf 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devconf 0>;
+};
Index: head/sys/gnu/dts/mips/RT-N10-PLUS.dts
===================================================================
--- head/sys/gnu/dts/mips/RT-N10-PLUS.dts
+++ head/sys/gnu/dts/mips/RT-N10-PLUS.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
@@ -38,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&devconf 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&devconf 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -78,3 +66,15 @@
};
};
};
+
+&ethernet {
+ mtd-mac-address = <&devconf 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devconf 0>;
+};
Index: head/sys/gnu/dts/mips/RT-N13U.dts
===================================================================
--- head/sys/gnu/dts/mips/RT-N13U.dts
+++ head/sys/gnu/dts/mips/RT-N13U.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "RT-N13U", "ralink,rt3052-soc";
model = "Asus RT-N13U";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -79,20 +70,29 @@
linux,code = <0x211>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/RT-N14U.dts
===================================================================
--- head/sys/gnu/dts/mips/RT-N14U.dts
+++ head/sys/gnu/dts/mips/RT-N14U.dts
@@ -1,83 +1,11 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
model = "Asus RT-N14U";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "i2c";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -126,3 +54,73 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/RT-N15.dts
===================================================================
--- head/sys/gnu/dts/mips/RT-N15.dts
+++ head/sys/gnu/dts/mips/RT-N15.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
/ {
#address-cells = <1>;
@@ -8,21 +8,6 @@
compatible = "RT-N15", "ralink,rt2880-soc";
model = "Asus RT-N15";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartlite", "mdio";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -55,34 +40,12 @@
};
};
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- phy-mode = "mii";
- reg = <0>;
- };
- };
- };
-
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio0 1 0>;
gpio-sck = <&gpio0 2 0>;
};
- wmac@480000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -111,3 +74,38 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartlite", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/RT-N56U.dts
===================================================================
--- head/sys/gnu/dts/mips/RT-N56U.dts
+++ head/sys/gnu/dts/mips/RT-N56U.dts
@@ -1,73 +1,11 @@
/dts-v1/;
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
/ {
compatible = "RT-N56U", "ralink,rt3883-soc";
model = "Asus RT-N56U";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- };
- };
-
- pci@10140000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pci_pins>;
-
- pci_pins: pci {
- pci {
- ralink,group = "pci";
- ralink,function = "pci-fnc";
- };
- };
-
- host-bridge {
- pci-bridge@1 {
- status = "okay";
-
- wmac@0,0 {
- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
- reg = < 0x10000 0 0 0 0 >;
- ralink,eeprom = "rt2x00pci_1_0.eeprom";
- };
- };
- };
- };
-
- wmac@10180000 {
- status = "okay";
- ralink,2ghz = <0>;
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
@@ -149,3 +87,63 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+};
+
+&pci {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pci_pins>;
+
+ pci_pins: pci {
+ pci {
+ ralink,group = "pci";
+ ralink,function = "pci-fnc";
+ };
+ };
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+
+ wmac@0,0 {
+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
+ reg = < 0x10000 0 0 0 0 >;
+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,2ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
===================================================================
--- head/sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
+++ head/sys/gnu/dts/mips/RT5350F-OLINUXINO-EVB.dts
@@ -1,83 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "RT5350F-OLINUXINO-EVB", "ralink,rt5350-soc";
model = "Olimex RT5350F-OLinuXino-EVB";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- gpio1: gpio@660 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
@@ -100,3 +28,73 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
===================================================================
--- head/sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
+++ head/sys/gnu/dts/mips/RT5350F-OLINUXINO.dts
@@ -1,80 +1,78 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
model = "Olimex RT5350F-OLinuXino";
+};
+
+&spi0 {
+ status = "okay";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- gpio1: gpio@660 {
- status = "okay";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
};
- };
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
};
- };
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
- };
+&gpio1 {
+ status = "okay";
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- ehci@101c0000 {
- status = "okay";
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- ohci@101c1000 {
- status = "okay";
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/RUT5XX.dts
===================================================================
--- head/sys/gnu/dts/mips/RUT5XX.dts
+++ head/sys/gnu/dts/mips/RUT5XX.dts
@@ -1,70 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "RUT5XX", "ralink,rt3050-soc";
model = "Teltonika RUT5XX";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "n25q128a13";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -86,8 +27,65 @@
linux,code = <0x198>;
};
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "n25q128a13";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/SAP-G3200U3.dts
===================================================================
--- head/sys/gnu/dts/mips/SAP-G3200U3.dts
+++ head/sys/gnu/dts/mips/SAP-G3200U3.dts
@@ -15,76 +15,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x1000>;
- read-only;
- };
-
- partition@31000 {
- label = "config";
- reg = <0x31000 0xf000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
- };
- };
-
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0xe006>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -112,13 +42,81 @@
linux,code = <0xf7>;
};
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
+
+ partition@31000 {
+ label = "config";
+ reg = <0x31000 0xf000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe006>;
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uart3", "jtag";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart3", "jtag";
+ ralink,function = "gpio";
};
};
};
Index: head/sys/gnu/dts/mips/SK-WB8.dts
===================================================================
--- head/sys/gnu/dts/mips/SK-WB8.dts
+++ head/sys/gnu/dts/mips/SK-WB8.dts
@@ -0,0 +1,124 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ model = "SamKnows Whitebox 8";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "sk-wb8:green:wps";
+ gpios = <&gpio1 14 1>;
+ };
+
+ usb {
+ label = "sk-wb8:green:usb";
+ gpios = <&gpio1 15 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ wps {
+ label = "wps";
+ gpios = <&gpio1 11 1>;
+ linux,code = <0x211>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio1 9 1>;
+ linux,code = <0x198>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+
+ partition@e30000 {
+ label = "recovery";
+ reg = <0xe30000 0x1d0000>;
+ };
+
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/SL-R7205.dts
===================================================================
--- head/sys/gnu/dts/mips/SL-R7205.dts
+++ head/sys/gnu/dts/mips/SL-R7205.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "SL-R7205", "ralink,rt3052-soc";
model = "Skyline SL-R7205 Wireless 3G Router";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -86,8 +65,29 @@
linux,code = <0x211>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/TEW-691GR.dts
===================================================================
--- head/sys/gnu/dts/mips/TEW-691GR.dts
+++ head/sys/gnu/dts/mips/TEW-691GR.dts
@@ -1,47 +1,11 @@
/dts-v1/;
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
/ {
compatible = "TEW-691GR", "ralink,rt3883-soc";
model = "TRENDnet TEW-691GR";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
-
- port@0 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
- };
-
- wmac@10180000 {
- ralink,5ghz = <0>;
- };
-
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
@@ -107,3 +71,37 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+
+ port@0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&wmac {
+ ralink,5ghz = <0>;
+};
Index: head/sys/gnu/dts/mips/TEW-692GR.dts
===================================================================
--- head/sys/gnu/dts/mips/TEW-692GR.dts
+++ head/sys/gnu/dts/mips/TEW-692GR.dts
@@ -1,67 +1,11 @@
/dts-v1/;
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
/ {
compatible = "TEW-692GR", "ralink,rt3883-soc";
model = "TRENDnet TEW-692GR";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- status = "okay";
- mtd-mac-address = <&factory 0x28>;
-
- port@0 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
- };
-
- pci@10140000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pci_pins>;
-
- pci_pins: pci {
- pci {
- ralink,group = "pci";
- ralink,function = "pci-fnc";
- };
- };
-
- host-bridge {
- pci-bridge@1 {
- status = "okay";
- };
- };
- };
-
- wmac@10180000 {
- ralink,5ghz = <0>;
- };
-
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
@@ -126,3 +70,57 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x28>;
+
+ port@0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&pci {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pci_pins>;
+
+ pci_pins: pci {
+ pci {
+ ralink,group = "pci";
+ ralink,function = "pci-fnc";
+ };
+ };
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+ };
+ };
+};
+
+&wmac {
+ ralink,5ghz = <0>;
+};
Index: head/sys/gnu/dts/mips/TINY-AC.dts
===================================================================
--- head/sys/gnu/dts/mips/TINY-AC.dts
+++ head/sys/gnu/dts/mips/TINY-AC.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "TINY-AC", "ralink,mt7620a-soc";
@@ -10,157 +10,154 @@
bootargs = "console=ttyS0,57600";
};
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
+ gpio-leds {
+ compatible = "gpio-leds";
- gpio2: gpio@660 {
- status = "okay";
+ usb {
+ label = "tiny-ac:green:usb";
+ gpios = <&gpio0 11 1>;
};
- gpio3: gpio@688 {
- status = "okay";
+ wifi {
+ label = "tiny-ac:orange:wifi";
+ gpios = <&gpio3 0 1>;
};
- spi@b00 {
- status = "okay";
+ };
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 1>;
+ linux,code = <0x198>;
+ };
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
+ };
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio2 5 0>;
};
};
+};
- ehci@101c0000 {
- status = "okay";
- };
+&gpio0 {
+ status = "okay";
+};
- ohci@101c1000 {
- status = "okay";
- };
+&gpio2 {
+ status = "okay";
+};
- ethernet@10100000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
+&gpio3 {
+ status = "okay";
+};
- port@4 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&phy4>;
- };
+&spi0 {
+ status = "okay";
- port@5 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- mdio-bus {
- status = "okay";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
+};
- gsw@10110000 {
- mediatek,port4 = "gmac";
- mediatek,mt7530 = <1>;
+&ehci {
+ status = "okay";
+};
- };
+&ohci {
+ status = "okay";
+};
- wmac@10180000 {
- ralink,eeprom = "rt2x00pci_1_0.eeprom";
- };
+&ethernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
- pcie@10140000 {
+ port@4 {
status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "nd_sd", "wled";
- ralink,function = "gpio";
- };
- };
+ port@5 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
};
- gpio-leds {
- compatible = "gpio-leds";
+ mdio-bus {
+ status = "okay";
- usb {
- label = "tiny-ac:green:usb";
- gpios = <&gpio0 11 1>;
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
};
- wifi {
- label = "tiny-ac:orange:wifi";
- gpios = <&gpio3 0 1>;
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
};
-
};
+};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 1>;
- linux,code = <0x198>;
- };
+&gsw {
+ mediatek,port4 = "gmac";
+ mediatek,mt7530 = <1>;
+};
- };
+&wmac {
+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
+};
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
+&pcie {
+ status = "okay";
+};
- usbpower {
- gpio-export,name = "usbpower";
- gpio-export,output = <1>;
- gpios = <&gpio2 5 0>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "nd_sd", "wled";
+ ralink,function = "gpio";
};
};
};
Index: head/sys/gnu/dts/mips/UBNT-ERX.dts
===================================================================
--- head/sys/gnu/dts/mips/UBNT-ERX.dts
+++ head/sys/gnu/dts/mips/UBNT-ERX.dts
@@ -17,30 +17,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus@1E000000 {
- spi@b00 {
- /* This board has 2Mb spi flash soldered in and visible
- from manufacturer's firmware.
- But this SoC shares spi and nand pins,
- and current driver does't handle this sharing well */
- status = "disabled";
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <1>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "spi";
- reg = <0x0 0x200000>;
- read-only;
- };
- };
- };
- };
-
nand@1e003000 {
status = "okay";
@@ -78,27 +54,6 @@
};
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0x22>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
- ralink,function = "gpio";
- };
- };
- };
-
- sdhci@1E130000 {
- status = "disabled";
- };
-
- pcie@1e140000 {
- status = "disabled";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -112,3 +67,46 @@
};
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x22>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&sdhci {
+ status = "disabled";
+};
+
+&pcie {
+ status = "disabled";
+};
+
+&spi0 {
+ /* This board has 2Mb spi flash soldered in and visible
+ from manufacturer's firmware.
+ But this SoC shares spi and nand pins,
+ and current driver does't handle this sharing well */
+ status = "disabled";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "spi";
+ reg = <0x0 0x200000>;
+ read-only;
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/UR-326N4G.dts
===================================================================
--- head/sys/gnu/dts/mips/UR-326N4G.dts
+++ head/sys/gnu/dts/mips/UR-326N4G.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "UR-326N4G", "ralink,rt3052-soc";
model = "UPVEL UR-326N4G";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4004>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -106,8 +85,29 @@
linux,code = <0x32>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/UR-336UN.dts
===================================================================
--- head/sys/gnu/dts/mips/UR-336UN.dts
+++ head/sys/gnu/dts/mips/UR-336UN.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "UR-336UN", "ralink,rt3052-soc";
model = "UPVEL UR-336UN";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -24,20 +15,6 @@
#size-cells = <1>;
};
- /* FIXME: no partitions defined */
-/* ethernet@10100000 {
- mtd-mac-address = <&factory 0x4004>;
- };
-*/
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- /* FIXME: no partitions defined */
-/* wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-*/
gpio-leds {
compatible = "gpio-leds";
@@ -85,8 +62,31 @@
linux,code = <0x32>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+/* FIXME: no partitions defined */
+/*&ethernet {
+ mtd-mac-address = <&factory 0x4004>;
+};
+*/
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+/* FIXME: no partitions defined */
+/*&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+*/
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/V11STFE.dts
===================================================================
--- head/sys/gnu/dts/mips/V11STFE.dts
+++ head/sys/gnu/dts/mips/V11STFE.dts
@@ -1,26 +1,12 @@
/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
/ {
compatible = "V11ST-FE", "ralink,rt2880-soc";
model = "Ralink V11ST-FE";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- ethernet@400000 {
- status = "okay";
- };
-
- wmac@480000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pci@10140000 {
+ pci@440000 {
status = "okay";
host-bridge {
@@ -83,3 +69,15 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&ethernet {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/V22RW-2X2.dts
===================================================================
--- head/sys/gnu/dts/mips/V22RW-2X2.dts
+++ head/sys/gnu/dts/mips/V22RW-2X2.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "V22RW-2X2", "ralink,rt3052-soc";
model = "Ralink AP-RT3052-V22RW-2X2";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,14 +38,6 @@
};
};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -87,8 +70,25 @@
linux,code = <0x211>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/VOCORE-16M.dts
===================================================================
--- head/sys/gnu/dts/mips/VOCORE-16M.dts
+++ head/sys/gnu/dts/mips/VOCORE-16M.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "VOCORE.dtsi"
+#include "VOCORE.dtsi"
&spi0 {
status = "okay";
@@ -9,7 +9,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
- reg = <0>;
+ reg = <0 0>;
linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
Index: head/sys/gnu/dts/mips/VOCORE-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/VOCORE-8M.dts
+++ head/sys/gnu/dts/mips/VOCORE-8M.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "VOCORE.dtsi"
+#include "VOCORE.dtsi"
&spi0 {
status = "okay";
@@ -9,7 +9,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
- reg = <0>;
+ reg = <0 0>;
linux,modalias = "m25p80", "s25fl064k";
spi-max-frequency = <10000000>;
Index: head/sys/gnu/dts/mips/VOCORE.dtsi
===================================================================
--- head/sys/gnu/dts/mips/VOCORE.dtsi
+++ head/sys/gnu/dts/mips/VOCORE.dtsi
@@ -1,48 +1,9 @@
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "VoCore", "ralink,rt5350-soc";
model = "VoCore";
- palmbus@10000000 {
- gpio1: gpio@660 {
- status = "okay";
- };
-
- i2c@900 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x17>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
@@ -186,6 +147,44 @@
};
};
+&gpio1 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default {
+ gpio {
+ ralink,group = "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x11>;
+ mediatek,portdisable = <0x2e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
&spi1 {
status = "okay";
Index: head/sys/gnu/dts/mips/W150M.dts
===================================================================
--- head/sys/gnu/dts/mips/W150M.dts
+++ head/sys/gnu/dts/mips/W150M.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "W150M", "ralink,rt3050-soc";
model = "Tenda W150M";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -99,16 +90,25 @@
linux,code = <0x100>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
};
Index: head/sys/gnu/dts/mips/W306R_V20.dts
===================================================================
--- head/sys/gnu/dts/mips/W306R_V20.dts
+++ head/sys/gnu/dts/mips/W306R_V20.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "W306R_V20", "ralink,rt3052-soc";
@@ -38,27 +38,6 @@
};
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -86,3 +65,24 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/W502U.dts
===================================================================
--- head/sys/gnu/dts/mips/W502U.dts
+++ head/sys/gnu/dts/mips/W502U.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "W502U", "ralink,rt3052-soc";
@@ -10,15 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -51,18 +42,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -95,8 +74,29 @@
linux,code = <0x211>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WCR150GN.dts
===================================================================
--- head/sys/gnu/dts/mips/WCR150GN.dts
+++ head/sys/gnu/dts/mips/WCR150GN.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WCR150GN", "ralink,rt3050-soc";
model = "Sparklan WCR-150GN";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -79,20 +70,29 @@
linux,code = <0x198>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/WF-2881.dts
===================================================================
--- head/sys/gnu/dts/mips/WF-2881.dts
+++ head/sys/gnu/dts/mips/WF-2881.dts
@@ -11,12 +11,6 @@
reg = <0x0 0x8000000>;
};
- palmbus@1E000000 {
- spi@b00 {
- status="disabled";
- };
- };
-
chosen {
bootargs = "console=ttyS0,57600";
};
@@ -54,32 +48,6 @@
};
};
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
- };
- };
-
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0xe006>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -106,13 +74,43 @@
linux,code = <0x198>;
};
};
+};
+
+&spi0 {
+ status="disabled";
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe006>;
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uart3", "jtag";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart3", "jtag";
+ ralink,function = "gpio";
};
};
};
Index: head/sys/gnu/dts/mips/WHR-1166D.dts
===================================================================
--- head/sys/gnu/dts/mips/WHR-1166D.dts
+++ head/sys/gnu/dts/mips/WHR-1166D.dts
@@ -1,103 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Buffalo WHR-1166D";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 32768>;
- mediatek,2ghz = <0>;
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -170,3 +78,93 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 32768>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WHR-300HP2.dts
===================================================================
--- head/sys/gnu/dts/mips/WHR-300HP2.dts
+++ head/sys/gnu/dts/mips/WHR-300HP2.dts
@@ -1,81 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Buffalo WHR-300HP2";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
- ralink,function = "gpio";
- };
-
- pa {
- ralink,group = "pa";
- ralink,function = "pa";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mediatek,portmap = "llllw";
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -148,3 +78,71 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/WHR-600D.dts
===================================================================
--- head/sys/gnu/dts/mips/WHR-600D.dts
+++ head/sys/gnu/dts/mips/WHR-600D.dts
@@ -1,81 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Buffalo WHR-600D";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- gsw@10110000 {
- mediatek,port4 = "ephy";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -148,3 +78,71 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WHR-G300N.dts
===================================================================
--- head/sys/gnu/dts/mips/WHR-G300N.dts
+++ head/sys/gnu/dts/mips/WHR-G300N.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WHR-G300N", "ralink,rt3052-soc";
model = "Buffalo WHR-G300N";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -24,15 +15,6 @@
#size-cells = <1>;
};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- /* FIXME: no partitions defined */
-/* wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-*/
gpio-leds {
compatible = "gpio-leds";
@@ -83,3 +65,22 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+/* FIXME: no partitions defined */
+/*&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+*/
Index: head/sys/gnu/dts/mips/WITI.dts
===================================================================
--- head/sys/gnu/dts/mips/WITI.dts
+++ head/sys/gnu/dts/mips/WITI.dts
@@ -15,50 +15,7 @@
bootargs = "console=ttyS0,57600";
};
- sdhci@10130000 {
- status = "okay";
- };
-
- xhci@1E1C0000 {
- status = "okay";
- };
-
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-
+ palmbus: palmbus@1E000000 {
i2c@900 {
compatible = "ralink,i2c-mt7621";
reg = <0x900 0x100>;
@@ -76,34 +33,6 @@
};
};
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- mtd-mac-address = <&factory 0xe000>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- mtd-mac-address = <&factory 0xe000>;
- };
- };
- };
-
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0xe000>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -116,13 +45,85 @@
linux,code = <0x198>;
};
};
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "rgmii2", "jtag", "mdio";
- ralink,function = "gpio";
- };
+
+&sdhci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ mtd-mac-address = <&factory 0xe000>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ mtd-mac-address = <&factory 0xe000>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
+ ralink,function = "gpio";
};
};
};
Index: head/sys/gnu/dts/mips/WIZARD8800.dts
===================================================================
--- head/sys/gnu/dts/mips/WIZARD8800.dts
+++ head/sys/gnu/dts/mips/WIZARD8800.dts
@@ -1,83 +1,81 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "WIZARD8800", "ralink,rt5350-soc";
model = "EASYACC WI-STOR WIZARD 8800";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
- palmbus@10000000 {
- gpio1@638 {
- status = "okay";
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q32";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- gpio2@660 {
- status = "okay";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
};
- spi@b00 {
- status = "okay";
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q32";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- ehci@101c0000 {
- status = "okay";
- };
+&ehci {
+ status = "okay";
+};
- ohci@101c1000 {
- status = "okay";
- };
+&ohci {
+ status = "okay";
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
};
Index: head/sys/gnu/dts/mips/WIZFI630A.dts
===================================================================
--- head/sys/gnu/dts/mips/WIZFI630A.dts
+++ head/sys/gnu/dts/mips/WIZFI630A.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "wizfi630a", "ralink,rt5350-soc";
@@ -10,116 +10,6 @@
bootargs = "console=ttyS1,115200";
};
- palmbus@10000000 {
- gpio1: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-
- uart@500 {
- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
- reg = <0x500 0x100>;
- resets = <&rstctrl 12>;
- reset-names = "uart";
- interrupt-parent = <&intc>;
- interrupts = <5>;
- reg-shift = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&uartf_pins>;
- status = "okay";
- };
-
- uartlite@c00 {
- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
- reg = <0xc00 0x100>;
- resets = <&rstctrl 19>;
- reset-names = "uartl";
- interrupt-parent = <&intc>;
- interrupts = <12>;
- reg-shift = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&uartlite_pins>;
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag" ;
- ralink,function = "gpio";
- };
- };
-
- uartf_gpio_pins: uartf_gpio {
- uartf_gpio {
- ralink,group = "uartf";
- ralink,function = "uartf";
- };
- };
-
- uartlite_pins: uartlite {
- uart {
- ralink,group = "uartlite";
- ralink,function = "uartlite";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x17>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
@@ -180,3 +70,115 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ #size-cells = <1>;
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ #size-cells = <1>;
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ #size-cells = <1>;
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ #size-cells = <1>;
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&uart {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0x500 0x100>;
+ resets = <&rstctrl 12>;
+ reset-names = "uart";
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+ reg-shift = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uartf_pins>;
+ status = "okay";
+};
+
+&uartlite {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "uartl";
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ reg-shift = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uartlite_pins>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag" ;
+ ralink,function = "gpio";
+ };
+ };
+
+ uartf_gpio_pins: uartf_gpio {
+ uartf_gpio {
+ ralink,group = "uartf";
+ ralink,function = "uartf";
+ };
+ };
+
+ uartlite_pins: uartlite {
+ uart {
+ ralink,group = "uartlite";
+ ralink,function = "uartlite";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WL-330N.dts
===================================================================
--- head/sys/gnu/dts/mips/WL-330N.dts
+++ head/sys/gnu/dts/mips/WL-330N.dts
@@ -1,70 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WL-330N", "ralink,rt3050-soc";
model = "Asus WL-330N";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -98,3 +39,60 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/WL-330N3G.dts
===================================================================
--- head/sys/gnu/dts/mips/WL-330N3G.dts
+++ head/sys/gnu/dts/mips/WL-330N3G.dts
@@ -1,70 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WL-330N3G", "ralink,rt3050-soc";
model = "Asus WL-330N3G";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -102,8 +43,65 @@
linux,code = <0x198>;
};
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- otg@101c0000 {
- status = "okay";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WL-341V3.dts
===================================================================
--- head/sys/gnu/dts/mips/WL-341V3.dts
+++ head/sys/gnu/dts/mips/WL-341V3.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WL-341V3", "ralink,rt3052-soc";
@@ -38,27 +38,6 @@
};
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&boardnvram 0xffa0>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&boardnvram 0xfd70>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -116,8 +95,29 @@
linux,code = <0x211>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&boardnvram 0xffa0>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&boardnvram 0xfd70>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WL-351.dts
===================================================================
--- head/sys/gnu/dts/mips/WL-351.dts
+++ head/sys/gnu/dts/mips/WL-351.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WL-351", "ralink,rt3052-soc";
model = "Sitecom WL-351 v1 002";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,30 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3f>;
- ralink,fct2 = <0x0002500c>;
- /*
- * ext phy base addr 31, rx/tx clock skew 0,
- * turbo mii off, rgmi 3.3v off, port 5 polling off
- * port5: enabled, gige, full-duplex, rx/tx-flow-control
- * port6: enabled, gige, full-duplex, rx/tx-flow-control
- */
- ralink,fpa2 = <0x1f003fff>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -115,3 +82,36 @@
gpio-sck = <&gpio0 2 0>;
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+ ralink,fct2 = <0x0002500c>;
+ /*
+ * ext phy base addr 31, rx/tx clock skew 0,
+ * turbo mii off, rgmi 3.3v off, port 5 polling off
+ * port5: enabled, gige, full-duplex, rx/tx-flow-control
+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
+ */
+ ralink,fpa2 = <0x1f003fff>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WLI-TX4-AG300N.dts
===================================================================
--- head/sys/gnu/dts/mips/WLI-TX4-AG300N.dts
+++ head/sys/gnu/dts/mips/WLI-TX4-AG300N.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
/ {
#address-cells = <1>;
@@ -8,12 +8,6 @@
compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
model = "Buffalo WLI-TX4-AG300N";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -46,19 +40,6 @@
};
};
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- };
- };
-
- wmac@480000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -103,3 +84,20 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/WMR-300.dts
===================================================================
--- head/sys/gnu/dts/mips/WMR-300.dts
+++ head/sys/gnu/dts/mips/WMR-300.dts
@@ -1,71 +1,11 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
model = "Buffalo WMR-300";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "ephy";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -104,3 +44,61 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WNCE2001.dts
===================================================================
--- head/sys/gnu/dts/mips/WNCE2001.dts
+++ head/sys/gnu/dts/mips/WNCE2001.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WNCE2001", "ralink,rt3052-soc";
@@ -10,78 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "config";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "language";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- partition@90000 {
- label = "pot";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- partition@a0000 {
- label = "checksum";
- reg = <0xa0000 0x10000>;
- };
-
- partition@b0000 {
- label = "firmware";
- reg = <0xb0000 0x350000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -137,3 +65,73 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "config";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "language";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "pot";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "checksum";
+ reg = <0xa0000 0x10000>;
+ };
+
+ partition@b0000 {
+ label = "firmware";
+ reg = <0xb0000 0x350000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/WNDR3700V5.dts
===================================================================
--- head/sys/gnu/dts/mips/WNDR3700V5.dts
+++ head/sys/gnu/dts/mips/WNDR3700V5.dts
@@ -0,0 +1,137 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
+ model = "Netgear WNDR3700v5";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600 maxcpus=2";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "wndr3700v5:green:wps";
+ gpios = <&gpio0 12 1>;
+ };
+
+ power {
+ label = "wndr3700v5:green:power";
+ gpios = <&gpio0 18 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ wps {
+ label = "wndr3700v5:wps";
+ gpios = <&gpio0 7 0>;
+ linux,code = <0x211>;
+ };
+
+ wifi {
+ label = "wndr3700v5:wifi";
+ gpios = <&gpio0 8 0>;
+ linux,code = <0xf7>;
+ };
+
+ reset {
+ label = "wndr3700v5:reset";
+ gpios = <&gpio0 14 0>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 10 1>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l12805d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@f30000 {
+ label = "factory";
+ reg = <0xf30000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0004>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie2 {
+ mt76@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8004>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x0000000c>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "rgmii2", "mdio", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WR512-3GN-4M.dts
===================================================================
--- head/sys/gnu/dts/mips/WR512-3GN-4M.dts
+++ head/sys/gnu/dts/mips/WR512-3GN-4M.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WR512-3GN", "ralink,rt3052-soc";
model = "WR512-3GN-like router";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,14 +38,6 @@
};
};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -102,8 +85,25 @@
linux,code = <0x32>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WR512-3GN-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/WR512-3GN-8M.dts
+++ head/sys/gnu/dts/mips/WR512-3GN-8M.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WR512-3GN", "ralink,rt3052-soc";
model = "WR512-3GN-like router";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,14 +38,6 @@
};
};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -102,8 +85,25 @@
linux,code = <0x32>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WR6202.dts
===================================================================
--- head/sys/gnu/dts/mips/WR6202.dts
+++ head/sys/gnu/dts/mips/WR6202.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "WR6202", "ralink,rt3052-soc";
@@ -10,15 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -84,22 +75,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
@@ -111,3 +86,28 @@
};
};
};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WRH-300CR.dts
===================================================================
--- head/sys/gnu/dts/mips/WRH-300CR.dts
+++ head/sys/gnu/dts/mips/WRH-300CR.dts
@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+/ {
+ compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc";
+ model = "ELECOM WRH-300CR";
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "wrh-300cr:green:wps";
+ gpios = <&gpio2 0 1>;
+ };
+
+ ethernet {
+ label = "wrh-300cr:green:ethernet";
+ gpios = <&gpio2 3 1>;
+ };
+
+ wlan {
+ label = "wrh-300cr:green:wlan";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x211>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l12805d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "recover";
+ reg = <0x50000 0x1c0000>;
+ read-only;
+ };
+
+ partition@210000 {
+ label = "firmware";
+ reg = <0x210000 0xdf0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x2e>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WRTNODE.dts
===================================================================
--- head/sys/gnu/dts/mips/WRTNODE.dts
+++ head/sys/gnu/dts/mips/WRTNODE.dts
@@ -1,93 +1,91 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "wrtnode", "ralink,mt7620n-soc";
model = "WRTNODE";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ indicator {
+ label = "wrtnode:blue:indicator";
+ gpios = <&gpio1 14 1>;
};
};
+};
- ehci@101c0000 {
- status = "okay";
- };
+&gpio1 {
+ status = "okay";
+};
- ohci@101c1000 {
- status = "okay";
- };
+&gpio2 {
+ status = "okay";
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
+&gpio3 {
+ status = "okay";
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&spi0 {
+ status = "okay";
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
- ralink,function = "gpio";
- };
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
};
};
+};
- gpio-leds {
- compatible = "gpio-leds";
+&ehci {
+ status = "okay";
+};
- indicator {
- label = "wrtnode:blue:indicator";
- gpios = <&gpio1 14 1>;
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
+ ralink,function = "gpio";
};
};
};
Index: head/sys/gnu/dts/mips/WRTNODE2.dtsi
===================================================================
--- head/sys/gnu/dts/mips/WRTNODE2.dtsi
+++ head/sys/gnu/dts/mips/WRTNODE2.dtsi
@@ -1,93 +1,90 @@
-/include/ "mt7628an.dtsi"
+#include "mt7628an.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- spi-max-frequency = <10000000>;
- m25p,chunked-io = <32>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
-
-
- spidev@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spidev";
- reg = <1 0>;
- linux,modalias = "spidev", "spidev";
- spi-max-frequency = <10000000>;
- };
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 5 1>;
+ linux,code = <0x198>;
};
+ };
+};
- uart1@d00 {
- status = "okay";
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- i2c@900 {
- status = "okay";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
};
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- ralink,port-map = "llllw";
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
};
- sdhci@10130000 {
- status = "okay";
+ spidev@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spidev";
+ reg = <1 0>;
+ linux,modalias = "spidev", "spidev";
+ spi-max-frequency = <10000000>;
};
+};
- pcie@10140000 {
- status = "okay";
- };
+&uart1 {
+ status = "okay";
+};
+&i2c {
+ status = "okay";
+};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "llllw";
+};
- reset {
- label = "reset";
- gpios = <&gpio0 5 1>;
- linux,code = <0x198>;
- };
- };
+&sdhci {
+ status = "okay";
+};
+&pcie {
+ status = "okay";
};
+&wmac {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/WRTNODE2P.dts
===================================================================
--- head/sys/gnu/dts/mips/WRTNODE2P.dts
+++ head/sys/gnu/dts/mips/WRTNODE2P.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "WRTNODE2.dtsi"
+#include "WRTNODE2.dtsi"
/ {
compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc";
model = "WRTnode2P";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "gpio", "jtag";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -25,3 +16,11 @@
};
};
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "gpio", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WRTNODE2R.dts
===================================================================
--- head/sys/gnu/dts/mips/WRTNODE2R.dts
+++ head/sys/gnu/dts/mips/WRTNODE2R.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "WRTNODE2.dtsi"
+#include "WRTNODE2.dtsi"
/ {
compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc";
model = "WRTnode2R";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "gpio", "wled_an";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -25,3 +16,11 @@
};
};
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "gpio", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WSR-1166.dts
===================================================================
--- head/sys/gnu/dts/mips/WSR-1166.dts
+++ head/sys/gnu/dts/mips/WSR-1166.dts
@@ -15,58 +15,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf90000>;
- };
-
- partition@fe0000 {
- label = "board_data";
- reg = <0xfe0000 0x20000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -161,26 +109,76 @@
compatible = "gpio-poweroff";
gpios = <&gpio0 0 1>;
};
+};
+
+&spi0 {
+ status = "okay";
- pcie@1e140000 {
- status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf90000>;
+ };
+
+ partition@fe0000 {
+ label = "board_data";
+ reg = <0xfe0000 0x20000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
};
};
};
Index: head/sys/gnu/dts/mips/WSR-600.dts
===================================================================
--- head/sys/gnu/dts/mips/WSR-600.dts
+++ head/sys/gnu/dts/mips/WSR-600.dts
@@ -15,53 +15,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -157,3 +110,48 @@
gpios = <&gpio1 11 1>;
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WT1520-4M.dts
===================================================================
--- head/sys/gnu/dts/mips/WT1520-4M.dts
+++ head/sys/gnu/dts/mips/WT1520-4M.dts
@@ -1,43 +1,39 @@
/dts-v1/;
-/include/ "WT1520.dtsi"
+#include "WT1520.dtsi"
-/ {
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
};
};
};
Index: head/sys/gnu/dts/mips/WT1520-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/WT1520-8M.dts
+++ head/sys/gnu/dts/mips/WT1520-8M.dts
@@ -1,43 +1,39 @@
/dts-v1/;
-/include/ "WT1520.dtsi"
+#include "WT1520.dtsi"
-/ {
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
};
Index: head/sys/gnu/dts/mips/WT1520.dtsi
===================================================================
--- head/sys/gnu/dts/mips/WT1520.dtsi
+++ head/sys/gnu/dts/mips/WT1520.dtsi
@@ -1,4 +1,4 @@
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "NEXXWT1520", "ralink,rt5350-soc";
@@ -12,37 +12,35 @@
chosen {
bootargs = "console=ttyS1,57600";
};
+};
- palmbus@10000000 {
- uart@500 {
- pinctrl-names = "default";
- pinctrl-0 = <&uartf_pins>;
- status = "okay";
- };
- };
+&uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uartf_pins>;
+ status = "okay";
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default {
+ gpio {
+ ralink,group = "jtag";
+ ralink,function = "gpio";
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
- ehci@101c0000 {
- status = "okay";
- };
+&ehci {
+ status = "okay";
+};
- ohci@101c1000 {
- status = "okay";
- };
+&ohci {
+ status = "okay";
};
Index: head/sys/gnu/dts/mips/WT3020-4M.dts
===================================================================
--- head/sys/gnu/dts/mips/WT3020-4M.dts
+++ head/sys/gnu/dts/mips/WT3020-4M.dts
@@ -1,83 +1,11 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "wt3020", "ralink,mt7620n-soc";
model = "Nexx WT3020";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q32";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -100,3 +28,73 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q32";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WT3020-8M.dts
===================================================================
--- head/sys/gnu/dts/mips/WT3020-8M.dts
+++ head/sys/gnu/dts/mips/WT3020-8M.dts
@@ -1,83 +1,11 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "wt3020", "ralink,mt7620n-soc";
model = "Nexx WT3020";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -100,3 +28,73 @@
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/WZR-AGL300NH.dts
===================================================================
--- head/sys/gnu/dts/mips/WZR-AGL300NH.dts
+++ head/sys/gnu/dts/mips/WZR-AGL300NH.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
/ {
#address-cells = <1>;
@@ -8,19 +8,12 @@
compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
model = "Buffalo WZR-AGL300NH";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartlite", "mdio";
- ralink,function = "gpio";
- };
- };
+ pci@440000 {
+ compatible = "ralink,rt288x-pci";
+ reg = <0x00440000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "ok";
};
cfi@1f000000 {
@@ -55,34 +48,12 @@
};
};
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- phy-mode = "mii";
- reg = <0>;
- };
- };
- };
-
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio0 1 0>;
gpio-sck = <&gpio0 2 0>;
};
- wmac@480000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -131,13 +102,39 @@
gpios = <&gpio0 13 1>;
};
};
+};
+&gpio0 {
+ status = "okay";
+};
- pcibus0: pci@00440000 {
- compatible = "ralink,rt288x-pci";
- reg = <0x00440000 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- status = "ok";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartlite", "mdio";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
Index: head/sys/gnu/dts/mips/X5.dts
===================================================================
--- head/sys/gnu/dts/mips/X5.dts
+++ head/sys/gnu/dts/mips/X5.dts
@@ -1,67 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "X5", "ralink,rt5350-soc";
model = "Poray X5";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "gd25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -122,17 +66,71 @@
gpios = <&gpio0 18 0>;
};
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
- };
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "gd25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- ehci@101c0000 {
- status = "okay";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
+};
- ohci@101c1000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/X8.dts
===================================================================
--- head/sys/gnu/dts/mips/X8.dts
+++ head/sys/gnu/dts/mips/X8.dts
@@ -1,67 +1,11 @@
/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
/ {
compatible = "X8", "ralink,rt5350-soc";
model = "Poray X8";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "gd25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -83,17 +27,71 @@
linux,code = <0x198>;
};
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
- };
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "gd25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- ehci@101c0000 {
- status = "okay";
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
+};
- ohci@101c1000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/XDXRN502J.dts
===================================================================
--- head/sys/gnu/dts/mips/XDXRN502J.dts
+++ head/sys/gnu/dts/mips/XDXRN502J.dts
@@ -1,20 +1,11 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
compatible = "XDXRN502J", "ralink,rt3052-soc";
model = "XDX RN502J";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@@ -47,18 +38,6 @@
};
};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- mediatek,portmap = <0x3e>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -85,8 +64,29 @@
linux,code = <0x198>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/Y1.dts
===================================================================
--- head/sys/gnu/dts/mips/Y1.dts
+++ head/sys/gnu/dts/mips/Y1.dts
@@ -1,18 +1,11 @@
/dts-v1/;
-/include/ "Y1.dtsi"
+#include "Y1.dtsi"
/ {
compatible = "lenovo,Y1", "ralink,mt7620a-soc";
model = "Lenovo Y1";
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -47,3 +40,10 @@
};
};
};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
Index: head/sys/gnu/dts/mips/Y1.dtsi
===================================================================
--- head/sys/gnu/dts/mips/Y1.dtsi
+++ head/sys/gnu/dts/mips/Y1.dtsi
@@ -1,109 +1,107 @@
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200";
};
-
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 11 1>;
+ linux,code = <0x198>;
};
};
+};
+
+&gpio0 {
+ status = "okay";
+};
- ehci@101c0000 {
- status = "okay";
- };
+&gpio2 {
+ status = "okay";
+};
- ohci@101c1000 {
- status = "okay";
- };
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
- pcie@10140000 {
- status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
};
};
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "wled", "nd_sd";
- ralink,function = "gpio";
- };
-
- pa {
- ralink,group = "pa";
- ralink,function = "pa";
- };
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
};
};
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
+&pinctrl {
+ state_default {
+ gpio {
+ ralink,group = "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
- reset {
- label = "reset";
- gpios = <&gpio0 11 1>;
- linux,code = <0x198>;
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
};
};
};
Index: head/sys/gnu/dts/mips/Y1S.dts
===================================================================
--- head/sys/gnu/dts/mips/Y1S.dts
+++ head/sys/gnu/dts/mips/Y1S.dts
@@ -1,45 +1,11 @@
/dts-v1/;
-/include/ "Y1.dtsi"
+#include "Y1.dtsi"
/ {
compatible = "lenovo,Y1S", "ralink,mt7620a-soc";
model = "Lenovo Y1S";
- ethernet@10100000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "wllll";
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
- };
-
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
@@ -61,10 +27,6 @@
};
};
- gsw@10110000 {
- mediatek,port4 = "gmac";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -104,3 +66,41 @@
};
};
};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "wllll";
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
Index: head/sys/gnu/dts/mips/YOUKU-YK1.dts
===================================================================
--- head/sys/gnu/dts/mips/YOUKU-YK1.dts
+++ head/sys/gnu/dts/mips/YOUKU-YK1.dts
@@ -1,98 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "YOUKU-YK1", "ralink,mt7620a-soc";
model = "YOUKU YK1";
- palmbus@10000000 {
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q256";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- sdhci@b0130000 {
- status = "okay";
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
wan {
@@ -125,3 +38,87 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q256";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/ZBT-WA05.dts
===================================================================
--- head/sys/gnu/dts/mips/ZBT-WA05.dts
+++ head/sys/gnu/dts/mips/ZBT-WA05.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
@@ -10,82 +10,6 @@
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- en25q64@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x760000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -118,3 +42,77 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q64@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x760000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/ZBT-WE826.dts
===================================================================
--- head/sys/gnu/dts/mips/ZBT-WE826.dts
+++ head/sys/gnu/dts/mips/ZBT-WE826.dts
@@ -1,124 +1,122 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
- compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
- model = "ZBT-WE826";
+ compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
+ model = "ZBT-WE826";
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- en25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25q128";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
- };
-
- sdhci@10130000 {
- status = "okay";
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- ralink,port-map = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
- ralink,function = "gpio";
- };
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- power {
- label = "zbt-we826:green:power";
- gpios = <&gpio1 14 0>;
- };
- usb {
- label = "zbt-we826:green:usb";
- gpios = <&gpio1 15 0>;
- };
- air {
- label = "zbt-we826:green:wifi";
- gpios = <&gpio3 0 1>;
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 1 1>;
- linux,code = <0x198>;
- };
- };
-
- pcie@10140000 {
- status = "okay";
- };
-};
\ No newline at end of file
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "zbt-we826:green:power";
+ gpios = <&gpio1 14 0>;
+ };
+ usb {
+ label = "zbt-we826:green:usb";
+ gpios = <&gpio1 15 0>;
+ };
+ air {
+ label = "zbt-we826:green:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/ZBT-WG2626.dts
===================================================================
--- head/sys/gnu/dts/mips/ZBT-WG2626.dts
+++ head/sys/gnu/dts/mips/ZBT-WG2626.dts
@@ -15,48 +15,7 @@
bootargs = "console=ttyS0,115200";
};
- sdhci@10130000 {
- status = "okay";
- };
-
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
-
- };
- };
-
+ palmbus: palmbus@1E000000 {
i2c@900 {
compatible = "ralink,i2c-mt7621";
reg = <0x900 0x100>;
@@ -68,32 +27,6 @@
};
};
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
- };
- };
-
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0xe000>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -115,13 +48,79 @@
gpios = <&gpio0 24 1>;
};
};
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+ ralink,function = "gpio";
};
};
};
Index: head/sys/gnu/dts/mips/ZBT-WG3526.dts
===================================================================
--- head/sys/gnu/dts/mips/ZBT-WG3526.dts
+++ head/sys/gnu/dts/mips/ZBT-WG3526.dts
@@ -0,0 +1,126 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ model = "ZBT-WG3526";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus: palmbus@1E000000 {
+ i2c@900 {
+ compatible = "ralink,i2c-mt7621";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins>;
+ status = "okay";
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 18 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "zbt-wg3526:green:status";
+ gpios = <&gpio0 24 1>;
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/ZBT-WR8305RT.dts
===================================================================
--- head/sys/gnu/dts/mips/ZBT-WR8305RT.dts
+++ head/sys/gnu/dts/mips/ZBT-WR8305RT.dts
@@ -1,88 +1,11 @@
/dts-v1/;
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
/ {
compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
model = "Zbtlink ZBT-WR8305RT";
- palmbus@10000000 {
- gpio1: gpio@638 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- ephy {
- ralink,group = "ephy";
- ralink,function = "ephy";
- };
-
- default {
- ralink,group = "i2c", "uartf", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -115,3 +38,78 @@
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ ephy {
+ ralink,group = "ephy";
+ ralink,function = "ephy";
+ };
+
+ default {
+ ralink,group = "i2c", "uartf", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
Index: head/sys/gnu/dts/mips/ZTE-Q7.dts
===================================================================
--- head/sys/gnu/dts/mips/ZTE-Q7.dts
+++ head/sys/gnu/dts/mips/ZTE-Q7.dts
@@ -1,89 +1,11 @@
/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ZTE-Q7", "ralink,mt7620a-soc";
model = "ZTE Q7";
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- gpio1: gpio@638 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- sdhci@10130000 {
- status = "okay";
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
gpio-leds {
compatible = "gpio-leds";
@@ -111,3 +33,79 @@
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
Index: head/sys/gnu/dts/mips/mt7620a.dtsi
===================================================================
--- head/sys/gnu/dts/mips/mt7620a.dtsi
+++ head/sys/gnu/dts/mips/mt7620a.dtsi
@@ -23,9 +23,10 @@
aliases {
spi0 = &spi0;
spi1 = &spi1;
+ serial0 = &uartlite;
};
- palmbus@10000000 {
+ palmbus: palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
@@ -33,12 +34,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
reg = <0x0 0x100>;
};
- timer@100 {
+ timer: timer@100 {
compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
reg = <0x100 0x20>;
@@ -46,7 +47,7 @@
interrupts = <1>;
};
- watchdog@120 {
+ watchdog: watchdog@120 {
compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
reg = <0x120 0x10>;
@@ -71,7 +72,7 @@
interrupts = <2>;
};
- memc@300 {
+ memc: memc@300 {
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
@@ -82,7 +83,7 @@
interrupts = <3>;
};
- uart@500 {
+ uart: uart@500 {
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0x500 0x100>;
@@ -174,7 +175,7 @@
status = "disabled";
};
- i2c@900 {
+ i2c: i2c@900 {
compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
reg = <0x900 0x100>;
@@ -190,7 +191,7 @@
pinctrl-0 = <&i2c_pins>;
};
- i2s@a00 {
+ i2s: i2s@a00 {
compatible = "ralink,mt7620a-i2s";
reg = <0xa00 0x100>;
@@ -239,7 +240,7 @@
pinctrl-0 = <&spi_cs1>;
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
@@ -255,7 +256,7 @@
pinctrl-0 = <&uartlite_pins>;
};
- systick@d00 {
+ systick: systick@d00 {
compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
reg = <0xd00 0x10>;
@@ -266,7 +267,7 @@
interrupts = <7>;
};
- pcm@2000 {
+ pcm: pcm@2000 {
compatible = "ralink,mt7620a-pcm";
reg = <0x2000 0x800>;
@@ -297,7 +298,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -395,17 +396,25 @@
#reset-cells = <1>;
};
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
usbphy: usbphy {
compatible = "mediatek,mt7620-usbphy";
#phy-cells = <1>;
resets = <&rstctrl 22 &rstctrl 25>;
reset-names = "host", "device";
+
+ clocks = <&clkctrl 22 &clkctrl 25>;
+ clock-names = "host", "device";
};
- ethernet@10100000 {
+ ethernet: ethernet@10100000 {
compatible = "mediatek,mt7620-eth";
- reg = <0x10100000 10000>;
+ reg = <0x10100000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
@@ -442,7 +451,7 @@
gsw: gsw@10110000 {
compatible = "mediatek,mt7620-gsw";
- reg = <0x10110000 8000>;
+ reg = <0x10110000 0x8000>;
resets = <&rstctrl 23>;
reset-names = "esw";
@@ -451,9 +460,9 @@
interrupts = <17>;
};
- sdhci@10130000 {
+ sdhci: sdhci@10130000 {
compatible = "ralink,mt7620-sdhci";
- reg = <0x10130000 4000>;
+ reg = <0x10130000 0x4000>;
interrupt-parent = <&intc>;
interrupts = <14>;
@@ -461,7 +470,7 @@
status = "disabled";
};
- ehci@101c0000 {
+ ehci: ehci@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
@@ -474,7 +483,7 @@
status = "disabled";
};
- ohci@101c1000 {
+ ohci: ohci@101c1000 {
compatible = "generic-ohci";
reg = <0x101c1000 0x1000>;
@@ -487,7 +496,7 @@
status = "disabled";
};
- pcie@10140000 {
+ pcie: pcie@10140000 {
compatible = "mediatek,mt7620-pci";
reg = <0x10140000 0x100
0x10142000 0x100>;
@@ -498,6 +507,9 @@
resets = <&rstctrl 26>;
reset-names = "pcie0";
+ clocks = <&clkctrl 26>;
+ clock-names = "pcie0";
+
interrupt-parent = <&cpuintc>;
interrupts = <4>;
@@ -524,9 +536,9 @@
};
};
- wmac@10180000 {
+ wmac: wmac@10180000 {
compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
- reg = <0x10180000 40000>;
+ reg = <0x10180000 0x40000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
@@ -535,4 +547,4 @@
};
};
-/include/ "fbsd-mt7620a.dtsi"
+#include "fbsd-mt7620a.dtsi"
Index: head/sys/gnu/dts/mips/mt7620n.dtsi
===================================================================
--- head/sys/gnu/dts/mips/mt7620n.dtsi
+++ head/sys/gnu/dts/mips/mt7620n.dtsi
@@ -23,9 +23,10 @@
aliases {
spi0 = &spi0;
spi1 = &spi1;
+ serial0 = &uartlite;
};
- palmbus@10000000 {
+ palmbus: palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
@@ -33,12 +34,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
reg = <0x0 0x100>;
};
- timer@100 {
+ timer: timer@100 {
compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
reg = <0x100 0x20>;
@@ -46,7 +47,7 @@
interrupts = <1>;
};
- watchdog@120 {
+ watchdog: watchdog@120 {
compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
reg = <0x120 0x10>;
@@ -71,7 +72,7 @@
interrupts = <2>;
};
- memc@300 {
+ memc: memc@300 {
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
@@ -191,7 +192,7 @@
pinctrl-0 = <&spi_cs1>;
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
@@ -207,7 +208,7 @@
pinctrl-0 = <&uartlite_pins>;
};
- systick@d00 {
+ systick: systick@d00 {
compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
reg = <0xd00 0x10>;
@@ -219,7 +220,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -254,17 +255,25 @@
#reset-cells = <1>;
};
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
usbphy: usbphy {
compatible = "mediatek,mt7620-usbphy";
#phy-cells = <1>;
resets = <&rstctrl 22 &rstctrl 25>;
reset-names = "host", "device";
+
+ clocks = <&clkctrl 22 &clkctrl 25>;
+ clock-names = "host", "device";
};
- ethernet@10100000 {
+ ethernet: ethernet@10100000 {
compatible = "mediatek,mt7620-eth";
- reg = <0x10100000 10000>;
+ reg = <0x10100000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
@@ -287,7 +296,7 @@
gsw: gsw@10110000 {
compatible = "mediatek,mt7620-gsw";
- reg = <0x10110000 8000>;
+ reg = <0x10110000 0x8000>;
resets = <&rstctrl 23>;
reset-names = "esw";
@@ -297,7 +306,7 @@
mediatek,port4 = "gmac";
};
- ehci@101c0000 {
+ ehci: ehci@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
@@ -310,7 +319,7 @@
status = "disabled";
};
- ohci@101c1000 {
+ ohci: ohci@101c1000 {
compatible = "generic-ohci";
reg = <0x101c1000 0x1000>;
@@ -323,9 +332,9 @@
status = "disabled";
};
- wmac@10180000 {
+ wmac: wmac@10180000 {
compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
- reg = <0x10180000 40000>;
+ reg = <0x10180000 0x40000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
@@ -333,5 +342,3 @@
ralink,eeprom = "soc_wmac.eeprom";
};
};
-
-/include/ "fbsd-mt7620n.dtsi"
Index: head/sys/gnu/dts/mips/mt7621.dtsi
===================================================================
--- head/sys/gnu/dts/mips/mt7621.dtsi
+++ head/sys/gnu/dts/mips/mt7621.dtsi
@@ -22,6 +22,10 @@
compatible = "mti,cpu-interrupt-controller";
};
+ aliases {
+ serial0 = &uartlite;
+ };
+
cpuclock: cpuclock@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -38,7 +42,7 @@
clock-frequency = <50000000>;
};
- palmbus@1E000000 {
+ palmbus: palmbus@1E000000 {
compatible = "palmbus";
reg = <0x1E000000 0x100000>;
ranges = <0x0 0x1E000000 0x0FFFFF>;
@@ -46,12 +50,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "mtk,mt7621-sysc";
reg = <0x0 0x100>;
};
- wdt@100 {
+ wdt: wdt@100 {
compatible = "mtk,mt7621-wdt";
reg = <0x100 0x100>;
};
@@ -85,26 +89,27 @@
};
};
- memc@5000 {
+ memc: memc@5000 {
compatible = "mtk,mt7621-memc";
reg = <0x300 0x100>;
};
- cpc@1fbf0000 {
+ cpc: cpc@1fbf0000 {
compatible = "mtk,mt7621-cpc";
reg = <0x1fbf0000 0x8000>;
};
- mc@1fbf8000 {
+ mc: mc@1fbf8000 {
compatible = "mtk,mt7621-mc";
reg = <0x1fbf8000 0x8000>;
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ns16550a";
reg = <0xc00 0x100>;
clocks = <&sysclock>;
+ clock-frequency = <50000000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -114,7 +119,7 @@
no-loopback-test;
};
- spi@b00 {
+ spi0: spi@b00 {
status = "okay";
compatible = "ralink,mt7621-spi";
@@ -141,7 +146,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -237,15 +242,20 @@
#reset-cells = <1>;
};
- sdhci@1E130000 {
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
+ sdhci: sdhci@1E130000 {
compatible = "ralink,mt7620-sdhci";
- reg = <0x1E130000 4000>;
+ reg = <0x1E130000 0x4000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
};
- xhci@1E1C0000 {
+ xhci: xhci@1E1C0000 {
status = "okay";
compatible = "mediatek,mt8173-xhci";
@@ -275,7 +285,7 @@
};
};
- nand@1e003000 {
+ nand: nand@1e003000 {
status = "disabled";
compatible = "mtk,mt7621-nand";
@@ -286,9 +296,9 @@
#size-cells = <1>;
};
- ethernet@1e100000 {
+ ethernet: ethernet@1e100000 {
compatible = "mediatek,mt7621-eth";
- reg = <0x1e100000 10000>;
+ reg = <0x1e100000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
@@ -314,12 +324,12 @@
gsw: gsw@1e110000 {
compatible = "mediatek,mt7621-gsw";
- reg = <0x1e110000 8000>;
+ reg = <0x1e110000 0x8000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
};
- pcie@1e140000 {
+ pcie: pcie@1e140000 {
compatible = "mediatek,mt7621-pci";
reg = <0x1e140000 0x100
0x1e142000 0x100>;
@@ -345,6 +355,11 @@
status = "okay";
+ resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
+ reset-names = "pcie0", "pcie1", "pcie2";
+ clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
+ clock-names = "pcie0", "pcie1", "pcie2";
+
pcie0 {
reg = <0x0000 0 0 0 0>;
@@ -374,4 +389,4 @@
};
};
-/include/ "fbsd-mt7621.dtsi"
+#include "fbsd-mt7621.dtsi"
Index: head/sys/gnu/dts/mips/mt7628an.dtsi
===================================================================
--- head/sys/gnu/dts/mips/mt7628an.dtsi
+++ head/sys/gnu/dts/mips/mt7628an.dtsi
@@ -13,6 +13,10 @@
bootargs = "console=ttyS0,57600";
};
+ aliases {
+ serial0 = &uartlite;
+ };
+
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -20,7 +24,7 @@
compatible = "mti,cpu-interrupt-controller";
};
- palmbus@10000000 {
+ palmbus: palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
@@ -28,12 +32,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "ralink,mt7620a-sysc";
reg = <0x0 0x100>;
};
- watchdog@120 {
+ watchdog: watchdog@120 {
compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
reg = <0x120 0x10>;
@@ -62,7 +66,7 @@
0x80 0x78>;
};
- memc@300 {
+ memc: memc@300 {
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
@@ -105,7 +109,7 @@
};
};
- i2c@900 {
+ i2c: i2c@900 {
compatible = "mediatek,mt7628-i2c";
reg = <0x900 0x100>;
@@ -121,7 +125,7 @@
pinctrl-0 = <&i2c_pins>;
};
- i2s@a00 {
+ i2s: i2s@a00 {
compatible = "ralink,mt7620a-i2s";
reg = <0xa00 0x100>;
@@ -138,7 +142,7 @@
status = "disabled";
};
- spi@b00 {
+ spi0: spi@b00 {
compatible = "ralink,mt7621-spi";
reg = <0xb00 0x100>;
@@ -154,7 +158,7 @@
status = "disabled";
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ns16550a";
reg = <0xc00 0x100>;
@@ -162,6 +166,8 @@
reg-io-width = <4>;
no-loopback-test;
+ clock-frequency = <40000000>;
+
resets = <&rstctrl 12>;
reset-names = "uartl";
@@ -172,7 +178,7 @@
pinctrl-0 = <&uart0_pins>;
};
- uart1@d00 {
+ uart1: uart1@d00 {
compatible = "ns16550a";
reg = <0xd00 0x100>;
@@ -180,6 +186,8 @@
reg-io-width = <4>;
no-loopback-test;
+ clock-frequency = <40000000>;
+
resets = <&rstctrl 19>;
reset-names = "uart1";
@@ -192,7 +200,7 @@
status = "disabled";
};
- uart2@e00 {
+ uart2: uart2@e00 {
compatible = "ns16550a";
reg = <0xe00 0x100>;
@@ -200,6 +208,8 @@
reg-io-width = <4>;
no-loopback-test;
+ clock-frequency = <40000000>;
+
resets = <&rstctrl 20>;
reset-names = "uart2";
@@ -212,7 +222,7 @@
status = "disabled";
};
- pwm@5000 {
+ pwm: pwm@5000 {
compatible = "mediatek,mt7628-pwm";
reg = <0x5000 0x1000>;
@@ -225,7 +235,7 @@
status = "disabled";
};
- pcm@2000 {
+ pcm: pcm@2000 {
compatible = "ralink,mt7620a-pcm";
reg = <0x2000 0x800>;
@@ -256,7 +266,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -340,18 +350,25 @@
#reset-cells = <1>;
};
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
usbphy: usbphy@10120000 {
compatible = "ralink,mt7628an-usbphy", "mediatek,mt7620-usbphy";
- reg = <0x10120000 4000>;
+ reg = <0x10120000 0x4000>;
#phy-cells = <1>;
resets = <&rstctrl 22 &rstctrl 25>;
reset-names = "host", "device";
+ clocks = <&clkctrl 22 &clkctrl 25>;
+ clock-names = "host", "device";
};
- sdhci@10130000 {
+ sdhci: sdhci@10130000 {
compatible = "ralink,mt7620-sdhci";
- reg = <0x10130000 4000>;
+ reg = <0x10130000 0x4000>;
interrupt-parent = <&intc>;
interrupts = <14>;
@@ -362,7 +379,7 @@
status = "disabled";
};
- ehci@101c0000 {
+ ehci: ehci@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
@@ -373,7 +390,7 @@
interrupts = <18>;
};
- ohci@101c1000 {
+ ohci: ohci@101c1000 {
compatible = "generic-ohci";
reg = <0x101c1000 0x1000>;
@@ -384,9 +401,9 @@
interrupts = <18>;
};
- ethernet@10100000 {
+ ethernet: ethernet@10100000 {
compatible = "ralink,rt5350-eth";
- reg = <0x10100000 10000>;
+ reg = <0x10100000 0x10000>;
interrupt-parent = <&cpuintc>;
interrupts = <5>;
@@ -398,8 +415,8 @@
};
esw: esw@10110000 {
- compatible = "ralink,rt3050-esw";
- reg = <0x10110000 8000>;
+ compatible = "mediatek,mt7628-esw", "ralink,rt3050-esw";
+ reg = <0x10110000 0x8000>;
resets = <&rstctrl 23>;
reset-names = "esw";
@@ -408,7 +425,7 @@
interrupts = <17>;
};
- pcie@10140000 {
+ pcie: pcie@10140000 {
compatible = "mediatek,mt7620-pci";
reg = <0x10140000 0x100
0x10142000 0x100>;
@@ -416,12 +433,14 @@
#address-cells = <3>;
#size-cells = <2>;
- resets = <&rstctrl 26>;
- reset-names = "pcie0";
-
interrupt-parent = <&cpuintc>;
interrupts = <4>;
+ resets = <&rstctrl 26 &rstctrl 27>;
+ reset-names = "pcie0", "pcie1";
+ clocks = <&clkctrl 26 &clkctrl 27>;
+ clock-names = "pcie0", "pcie1";
+
status = "disabled";
device_type = "pci";
@@ -444,7 +463,7 @@
wmac: wmac@10300000 {
compatible = "mediatek,mt7628-wmac";
- reg = <0x10300000 100000>;
+ reg = <0x10300000 0x100000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
@@ -456,4 +475,4 @@
};
};
-/include/ "fbsd-mt7628an.dtsi"
+#include "fbsd-mt7628an.dtsi"
Index: head/sys/gnu/dts/mips/rt2880.dtsi
===================================================================
--- head/sys/gnu/dts/mips/rt2880.dtsi
+++ head/sys/gnu/dts/mips/rt2880.dtsi
@@ -13,6 +13,10 @@
bootargs = "console=ttyS0,57600";
};
+ aliases {
+ serial0 = &uartlite;
+ };
+
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -20,7 +24,7 @@
compatible = "mti,cpu-interrupt-controller";
};
- palmbus@300000 {
+ palmbus: palmbus@300000 {
compatible = "palmbus";
reg = <0x300000 0x200000>;
ranges = <0x0 0x300000 0x1FFFFF>;
@@ -28,12 +32,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "ralink,rt2880-sysc";
reg = <0x000 0x100>;
};
- timer@100 {
+ timer: timer@100 {
compatible = "ralink,rt2880-timer";
reg = <0x100 0x20>;
@@ -43,7 +47,7 @@
status = "disabled";
};
- watchdog@120 {
+ watchdog: watchdog@120 {
compatible = "ralink,rt2880-wdt";
reg = <0x120 0x10>;
};
@@ -59,7 +63,7 @@
interrupts = <2>;
};
- memc@300 {
+ memc: memc@300 {
compatible = "ralink,rt2880-memc";
reg = <0x300 0x100>;
};
@@ -110,7 +114,7 @@
status = "disabled";
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
@@ -121,7 +125,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
@@ -154,9 +158,14 @@
#reset-cells = <1>;
};
- ethernet@400000 {
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
+ ethernet: ethernet@400000 {
compatible = "ralink,rt2880-eth";
- reg = <0x00400000 10000>;
+ reg = <0x00400000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
@@ -182,9 +191,9 @@
};
};
- wmac@480000 {
+ wmac: wmac@480000 {
compatible = "ralink,rt2880-wmac";
- reg = <0x480000 40000>;
+ reg = <0x480000 0x40000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
@@ -192,5 +201,3 @@
ralink,eeprom = "soc_wmac.eeprom";
};
};
-
-/include/ "fbsd-rt2880.dtsi"
Index: head/sys/gnu/dts/mips/rt3050.dtsi
===================================================================
--- head/sys/gnu/dts/mips/rt3050.dtsi
+++ head/sys/gnu/dts/mips/rt3050.dtsi
@@ -15,6 +15,7 @@
aliases {
spi0 = &spi0;
+ serial0 = &uartlite;
};
cpuintc: cpuintc@0 {
@@ -24,7 +25,7 @@
compatible = "mti,cpu-interrupt-controller";
};
- palmbus@10000000 {
+ palmbus: palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
@@ -32,12 +33,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "ralink,rt3050-sysc";
reg = <0x0 0x100>;
};
- timer@100 {
+ timer: timer@100 {
compatible = "ralink,rt3050-timer", "ralink,rt2880-timer";
reg = <0x100 0x20>;
@@ -45,7 +46,7 @@
interrupts = <1>;
};
- watchdog@120 {
+ watchdog: watchdog@120 {
compatible = "ralink,rt3050-wdt", "ralink,rt2880-wdt";
reg = <0x120 0x10>;
@@ -70,7 +71,7 @@
interrupts = <2>;
};
- memc@300 {
+ memc: memc@300 {
compatible = "ralink,rt3050-memc";
reg = <0x300 0x100>;
@@ -81,7 +82,7 @@
interrupts = <3>;
};
- uart@500 {
+ uart: uart@500 {
compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0x500 0x100>;
@@ -164,7 +165,7 @@
status = "disabled";
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
@@ -181,7 +182,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
@@ -214,9 +215,22 @@
#reset-cells = <1>;
};
- ethernet@10100000 {
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
+ usbphy: usbphy {
+ compatible = "ralink,rt3050-usbphy";
+ resets = <&rstctrl 22>;
+ reset-names = "host";
+ clocks = <&clkctrl 18>;
+ clock-names = "host";
+ };
+
+ ethernet: ethernet@10100000 {
compatible = "ralink,rt3050-eth";
- reg = <0x10100000 10000>;
+ reg = <0x10100000 0x10000>;
resets = <&rstctrl 21>;
reset-names = "fe";
@@ -229,7 +243,7 @@
esw: esw@10110000 {
compatible = "ralink,rt3050-esw";
- reg = <0x10110000 8000>;
+ reg = <0x10110000 0x8000>;
resets = <&rstctrl 23>;
reset-names = "esw";
@@ -238,9 +252,9 @@
interrupts = <17>;
};
- wmac@10180000 {
+ wmac: wmac@10180000 {
compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac";
- reg = <0x10180000 40000>;
+ reg = <0x10180000 0x40000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
@@ -248,9 +262,9 @@
ralink,eeprom = "soc_wmac.eeprom";
};
- otg@101c0000 {
+ otg: otg@101c0000 {
compatible = "ralink,rt3050-otg", "snps,dwc2";
- reg = <0x101c0000 40000>;
+ reg = <0x101c0000 0x40000>;
interrupt-parent = <&intc>;
interrupts = <18>;
@@ -261,5 +275,3 @@
status = "disabled";
};
};
-
-/include/ "fbsd-rt3050.dtsi"
Index: head/sys/gnu/dts/mips/rt3352.dtsi
===================================================================
--- head/sys/gnu/dts/mips/rt3352.dtsi
+++ head/sys/gnu/dts/mips/rt3352.dtsi
@@ -23,9 +23,10 @@
aliases {
spi0 = &spi0;
spi1 = &spi1;
+ serial0 = &uartlite;
};
- palmbus@10000000 {
+ palmbus: palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
@@ -33,12 +34,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc";
reg = <0x0 0x100>;
};
- timer@100 {
+ timer: timer@100 {
compatible = "ralink,rt3352-timer", "ralink,rt2880-timer";
reg = <0x100 0x20>;
@@ -46,7 +47,7 @@
interrupts = <1>;
};
- watchdog@120 {
+ watchdog: watchdog@120 {
compatible = "ralink,rt3352-wdt", "ralink,rt2880-wdt";
reg = <0x120 0x10>;
@@ -68,7 +69,7 @@
interrupts = <2>;
};
- memc@300 {
+ memc: memc@300 {
compatible = "ralink,rt3352-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
@@ -79,7 +80,7 @@
interrupts = <3>;
};
- uart@500 {
+ uart: uart@500 {
compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0x500 0x100>;
@@ -175,7 +176,7 @@
status = "disabled";
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
@@ -192,7 +193,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
@@ -228,9 +229,14 @@
#reset-cells = <1>;
};
- ethernet@10100000 {
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
+ ethernet: ethernet@10100000 {
compatible = "ralink,rt3352-eth", "ralink,rt3050-eth";
- reg = <0x10100000 10000>;
+ reg = <0x10100000 0x10000>;
resets = <&rstctrl 21>;
reset-names = "fe";
@@ -243,7 +249,7 @@
esw: esw@10110000 {
compatible = "ralink,rt3352-esw", "ralink,rt3050-esw";
- reg = <0x10110000 8000>;
+ reg = <0x10110000 0x8000>;
resets = <&rstctrl 23>;
reset-names = "esw";
@@ -252,16 +258,19 @@
interrupts = <17>;
};
- usbphy {
+ usbphy: usbphy {
compatible = "ralink,rt3352-usbphy";
+ #phy-cells = <1>;
resets = <&rstctrl 22 &rstctrl 25>;
reset-names = "host", "device";
+ clocks = <&clkctrl 18 &clkctrl 20>;
+ clock-names = "host", "device";
};
- wmac@10180000 {
+ wmac: wmac@10180000 {
compatible = "ralink,rt3352-wmac", "ralink,rt2880-wmac";
- reg = <0x10180000 40000>;
+ reg = <0x10180000 0x40000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
@@ -269,25 +278,29 @@
ralink,eeprom = "soc_wmac.eeprom";
};
- ehci@101c0000 {
+ ehci: ehci@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+
interrupt-parent = <&intc>;
interrupts = <18>;
status = "disabled";
};
- ohci@101c1000 {
+ ohci: ohci@101c1000 {
compatible = "generic-ohci";
reg = <0x101c1000 0x1000>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+
interrupt-parent = <&intc>;
interrupts = <18>;
status = "disabled";
};
};
-
-/include/ "fbsd-rt3352.dtsi"
Index: head/sys/gnu/dts/mips/rt3883.dtsi
===================================================================
--- head/sys/gnu/dts/mips/rt3883.dtsi
+++ head/sys/gnu/dts/mips/rt3883.dtsi
@@ -16,6 +16,7 @@
aliases {
spi0 = &spi0;
spi1 = &spi1;
+ serial0 = &uartlite;
};
cpuintc: cpuintc@0 {
@@ -25,7 +26,7 @@
compatible = "mti,cpu-interrupt-controller";
};
- palmbus@10000000 {
+ palmbus: palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
@@ -33,12 +34,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
reg = <0x0 0x100>;
};
- timer@100 {
+ timer: timer@100 {
compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
reg = <0x100 0x20>;
@@ -46,7 +47,7 @@
interrupts = <1>;
};
- watchdog@120 {
+ watchdog: watchdog@120 {
compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
reg = <0x120 0x10>;
@@ -71,7 +72,7 @@
interrupts = <2>;
};
- memc@300 {
+ memc: memc@300 {
compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
@@ -82,7 +83,7 @@
interrupts = <3>;
};
- uart@500 {
+ uart: uart@500 {
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0x500 0x100>;
@@ -195,7 +196,7 @@
status = "disabled";
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
@@ -212,7 +213,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
@@ -243,9 +244,9 @@
};
};
- ethernet@10100000 {
+ ethernet: ethernet@10100000 {
compatible = "ralink,rt3883-eth";
- reg = <0x10100000 10000>;
+ reg = <0x10100000 0x10000>;
resets = <&rstctrl 21>;
reset-names = "fe";
@@ -271,7 +272,12 @@
#reset-cells = <1>;
};
- pci@10140000 {
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
+ pci: pci@10140000 {
compatible = "ralink,rt3883-pci";
reg = <0x10140000 0x20000>;
#address-cells = <1>;
@@ -363,11 +369,13 @@
resets = <&rstctrl 22 &rstctrl 25>;
reset-names = "host", "device";
+ clocks = <&clkctrl 22 &clkctrl 25>;
+ clock-names = "host", "device";
};
- wmac@10180000 {
+ wmac: wmac@10180000 {
compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
- reg = <0x10180000 40000>;
+ reg = <0x10180000 0x40000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
@@ -375,7 +383,7 @@
ralink,eeprom = "soc_wmac.eeprom";
};
- ehci@101c0000 {
+ ehci: ehci@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
@@ -388,7 +396,7 @@
status = "disabled";
};
- ohci@101c1000 {
+ ohci: ohci@101c1000 {
compatible = "generic-ohci";
reg = <0x101c1000 0x1000>;
@@ -402,4 +410,4 @@
};
};
-/include/ "fbsd-rt3883.dtsi"
+#include "fbsd-rt3883.dtsi"
Index: head/sys/gnu/dts/mips/rt5350.dtsi
===================================================================
--- head/sys/gnu/dts/mips/rt5350.dtsi
+++ head/sys/gnu/dts/mips/rt5350.dtsi
@@ -23,9 +23,10 @@
aliases {
spi0 = &spi0;
spi1 = &spi1;
+ serial0 = &uartlite;
};
- palmbus@10000000 {
+ palmbus: palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
@@ -33,12 +34,12 @@
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
+ sysc: sysc@0 {
compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
reg = <0x0 0x100>;
};
- timer@100 {
+ timer: timer@100 {
compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
reg = <0x100 0x20>;
@@ -46,7 +47,7 @@
interrupts = <1>;
};
- watchdog@120 {
+ watchdog: watchdog@120 {
compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
reg = <0x120 0x10>;
@@ -71,7 +72,7 @@
interrupts = <2>;
};
- memc@300 {
+ memc: memc@300 {
compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
@@ -82,7 +83,7 @@
interrupts = <3>;
};
- uart@500 {
+ uart: uart@500 {
compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0x500 0x100>;
@@ -136,7 +137,7 @@
status = "disabled";
};
- i2c@900 {
+ i2c: i2c@900 {
compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
reg = <0x900 0x100>;
@@ -184,7 +185,7 @@
status = "disabled";
};
- uartlite@c00 {
+ uartlite: uartlite@c00 {
compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
@@ -200,7 +201,7 @@
reg-shift = <2>;
};
- systick@d00 {
+ systick: systick@d00 {
compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
reg = <0xd00 0x10>;
@@ -209,7 +210,7 @@
};
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
@@ -266,17 +267,24 @@
#reset-cells = <1>;
};
+ clkctrl: clkctrl {
+ compatible = "ralink,rt2880-clock";
+ #clock-cells = <1>;
+ };
+
usbphy: usbphy {
compatible = "ralink,rt3352-usbphy";
#phy-cells = <1>;
resets = <&rstctrl 22 &rstctrl 25>;
reset-names = "host", "device";
+ clocks = <&clkctrl 18>;
+ clock-names = "host";
};
- ethernet@10100000 {
+ ethernet: ethernet@10100000 {
compatible = "ralink,rt5350-eth";
- reg = <0x10100000 10000>;
+ reg = <0x10100000 0x10000>;
resets = <&rstctrl 21 &rstctrl 23>;
reset-names = "fe", "esw";
@@ -288,8 +296,8 @@
};
esw: esw@10110000 {
- compatible = "ralink,rt3050-esw";
- reg = <0x10110000 8000>;
+ compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
+ reg = <0x10110000 0x8000>;
resets = <&rstctrl 23>;
reset-names = "esw";
@@ -298,9 +306,9 @@
interrupts = <17>;
};
- wmac@10180000 {
+ wmac: wmac@10180000 {
compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac";
- reg = <0x10180000 40000>;
+ reg = <0x10180000 0x40000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
@@ -308,7 +316,7 @@
ralink,eeprom = "soc_wmac.eeprom";
};
- ehci@101c0000 {
+ ehci: ehci@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
@@ -319,7 +327,7 @@
interrupts = <18>;
};
- ohci@101c1000 {
+ ohci: ohci@101c1000 {
compatible = "generic-ohci";
reg = <0x101c1000 0x1000>;
@@ -330,5 +338,3 @@
interrupts = <18>;
};
};
-
-/include/ "fbsd-rt5350.dtsi"

File Metadata

Mime Type
text/plain
Expires
Mon, Feb 16, 1:28 AM (1 h, 33 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
28763012
Default Alt Text
D6394.diff (442 KB)

Event Timeline