Page MenuHomeFreeBSD
Files F137248056

D43649.id133981.diff
No OneTemporary
Actions

D43649.id133981.diff
View Options

diff --git a/share/man/man4/snd_uaudio.4 b/share/man/man4/snd_uaudio.4
--- a/share/man/man4/snd_uaudio.4
+++ b/share/man/man4/snd_uaudio.4
@@ -57,12 +57,90 @@
USB digital input), output terminals (e.g.\& speakers), and a number of units
in between (e.g.\& volume control).
.Pp
+If the device supports multiple configurations, and there have been no
+user-supplied values specified through the
+.Xr sysctl 8
+interface, the driver will select the best matching configuration supported by
+the device during attach.
+"Best" means the configuration with the highest sample rate and most channels
+and sample size.
+.Pp
Refer to the
.Ql USB Audio Class Specification
for more information.
+.Sh SYSCTL VARIABLES
+The following settings can be entered at the
+.Xr loader 8
+prompt or in
+.Xr loader.conf 5
+and can also be changed at runtime with the
+.Xr sysctl 8
+command.
+For a change to take effect during runtime, the device has to be re-attached.
+.Pp
+All user-supplied values have match a valid configuration in order to take
+effect.
+.Bl -tag -width indent
+.It Va hw.usb.uaudio.buffer_ms
+Period of audio data processed at once, in milliseconds, from 1 to 8 (default
+is 4). Lower values mean less latency, but this can result in audible gaps due
+to frequent CPU wakeups.
+.It Va hw.usb.uaudio.default_bits
+Preferred sample size in bits, from 0 to 32 (default is 0).
+A value of 0 sets the sample size to the maximum supported sample size.
+.Pp
+Set this to select a smaller sample size if the device supports multiple sample
+sizes.
+.It Va hw.usb.uaudio.default_channels
+Preferred number of sample channels, from 0 to 64 (default is 0).
+USB 1.1 devices are limited to 4 channels due to bandwidth constraints,
+although higher values can be set.
+A value of 0 sets the sample channels to the maximum supported channel number.
+.Pp
+Set this to select a smaller channel number if the device supports multiple
+different sample channel configurations.
+.It Va hw.usb.uaudio.default_rate
+Preferred sample rate in Hz (default is 0).
+If set to 0, the device's highest supported sample rate will be used.
+.Pp
+Note that if VCHANs are enabled, the sample rate will be overriden by
+.Pa dev.pcm.%d.[play|rec].vchanrate
+(see
+.Xr sound 4 ) ,
+which can also be used to adjust the sample rate during runtime.
+.Pp
+If
+.Pa hw.usb.uaudio.default_rate
+is non-zero,
+.Pa dev.pcm.%d.[play|rec].vchanrate
+will use it as its maximum allowed value.
+.It Va hw.usb.uaudio.handle_hid
+Let
+.Nm
+handle HID volume keys, if any (default is 1).
+.Bl -tag -width 2n
+.It 0
+Disabled.
+.It 1
+Enabled.
+.El
+.El
+.Pp
+If
+.Xr usb 4
+has been compiled with
+.Va USB_DEBUG
+on, the following setting is also available:
+.Bl -tag -width indent
+.It Va hw.usb.uaudio.debug
+Debug output level (default is 0).
+.El
.Sh SEE ALSO
.Xr sound 4 ,
-.Xr usb 4
+.Xr usb 4 ,
+.Xr loader.conf 5 ,
+.Xr loader 8 ,
+.Xr sysctl 8
.Rs
.%T "USB Audio Class Specifications"
.%U http://www.usb.org/developers/docs/devclass_docs/

File Metadata

Mime Type
text/plain
Expires
Sat, Nov 22, 7:36 PM (3 h, 21 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
25984541
Default Alt Text
D43649.id133981.diff (2 KB)

Event Timeline