Page MenuHomeFreeBSD
Files F111836909

D49296.id.diff
No OneTemporary
Actions

D49296.id.diff
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.
diff --git a/crypto/openssl/CHANGES.md b/crypto/openssl/CHANGES.md
--- a/crypto/openssl/CHANGES.md
+++ b/crypto/openssl/CHANGES.md
@@ -28,6 +28,37 @@
[Migration guide]: https://github.com/openssl/openssl/tree/master/doc/man7/migration_guide.pod
+### Changes between 3.0.15 and 3.0.16 [11 Feb 2025]
+
+ * Fixed timing side-channel in ECDSA signature computation.
+
+ There is a timing signal of around 300 nanoseconds when the top word of
+ the inverted ECDSA nonce value is zero. This can happen with significant
+ probability only for some of the supported elliptic curves. In particular
+ the NIST P-521 curve is affected. To be able to measure this leak, the
+ attacker process must either be located in the same physical computer or
+ must have a very fast network connection with low latency.
+
+ ([CVE-2024-13176])
+
+ *Tomáš Mráz*
+
+ * Fixed possible OOB memory access with invalid low-level GF(2^m) elliptic
+ curve parameters.
+
+ Use of the low-level GF(2^m) elliptic curve APIs with untrusted
+ explicit values for the field polynomial can lead to out-of-bounds memory
+ reads or writes.
+ Applications working with "exotic" explicit binary (GF(2^m)) curve
+ parameters, that make it possible to represent invalid field polynomials
+ with a zero constant term, via the above or similar APIs, may terminate
+ abruptly as a result of reading or writing outside of array bounds. Remote
+ code execution cannot easily be ruled out.
+
+ ([CVE-2024-9143])
+
+ *Viktor Dukhovni*
+
### Changes between 3.0.14 and 3.0.15 [3 Sep 2024]
* Fixed possible denial of service in X.509 name checks.
@@ -19922,6 +19953,8 @@
<!-- Links -->
+[CVE-2024-13176]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-13176
+[CVE-2024-9143]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-9143
[CVE-2024-6119]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-6119
[CVE-2024-5535]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-5535
[CVE-2024-4741]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-4741
diff --git a/crypto/openssl/Configurations/unix-Makefile.tmpl b/crypto/openssl/Configurations/unix-Makefile.tmpl
--- a/crypto/openssl/Configurations/unix-Makefile.tmpl
+++ b/crypto/openssl/Configurations/unix-Makefile.tmpl
@@ -1688,7 +1688,7 @@
} elsif ($makedep_scheme eq 'gcc' && !grep /\.rc$/, @srcs) {
$recipe .= <<"EOF";
$obj: $deps
- $cmd $incs $defs $cmdflags -MMD -MF $dep.tmp -MT \$\@ -c -o \$\@ $srcs
+ $cmd $incs $defs $cmdflags -MMD -MF $dep.tmp -c -o \$\@ $srcs
\@touch $dep.tmp
\@if cmp $dep.tmp $dep > /dev/null 2> /dev/null; then \\
rm -f $dep.tmp; \\
diff --git a/crypto/openssl/NEWS.md b/crypto/openssl/NEWS.md
--- a/crypto/openssl/NEWS.md
+++ b/crypto/openssl/NEWS.md
@@ -18,6 +18,20 @@
OpenSSL 3.0
-----------
+### Major changes between OpenSSL 3.0.15 and OpenSSL 3.0.16 [11 Feb 2025]
+
+OpenSSL 3.0.16 is a security patch release. The most severe CVE fixed in this
+release is Low.
+
+This release incorporates the following bug fixes and mitigations:
+
+ * Fixed timing side-channel in ECDSA signature computation.
+ ([CVE-2024-13176])
+
+ * Fixed possible OOB memory access with invalid low-level GF(2^m) elliptic
+ curve parameters.
+ ([CVE-2024-9143])
+
### Major changes between OpenSSL 3.0.14 and OpenSSL 3.0.15 [3 Sep 2024]
OpenSSL 3.0.15 is a security patch release. The most severe CVE fixed in this
@@ -1495,6 +1509,8 @@
<!-- Links -->
+[CVE-2024-13176]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-13176
+[CVE-2024-9143]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-9143
[CVE-2024-6119]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-6119
[CVE-2024-5535]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-5535
[CVE-2024-4741]: https://www.openssl.org/news/vulnerabilities.html#CVE-2024-4741
diff --git a/crypto/openssl/NOTES-NONSTOP.md b/crypto/openssl/NOTES-NONSTOP.md
--- a/crypto/openssl/NOTES-NONSTOP.md
+++ b/crypto/openssl/NOTES-NONSTOP.md
@@ -119,12 +119,9 @@
`COMP_ROOT` needs to be in Windows form.
-`Configure` must specify the `no-makedepend` option otherwise errors will
-result when running the build because the c99 cross-compiler does not support
-the `gcc -MT` option. An example of a `Configure` command to be run from the
-OpenSSL directory is:
+An example of a `Configure` command to be run from the OpenSSL directory is:
- ./Configure nonstop-nsx_64 no-makedepend --with-rand-seed=rdcpu
+ ./Configure nonstop-nsx_64 --with-rand-seed=rdcpu
Do not forget to include any OpenSSL cross-compiling prefix and certificate
options when creating your libraries.
diff --git a/crypto/openssl/README.md b/crypto/openssl/README.md
--- a/crypto/openssl/README.md
+++ b/crypto/openssl/README.md
@@ -59,7 +59,7 @@
------------------
Source code tarballs of the official releases can be downloaded from
-[www.openssl.org/source](https://www.openssl.org/source).
+[openssl-library.org/source/](https://openssl-library.org/source/).
The OpenSSL project does not distribute the toolkit in binary form.
However, for a large variety of operating systems precompiled versions
@@ -75,22 +75,18 @@
the entire project history gives you much more insight into the
code base.
-The official OpenSSL Git Repository is located at [git.openssl.org].
-There is a GitHub mirror of the repository at [github.com/openssl/openssl],
+The main OpenSSL Git repository is private.
+There is a public GitHub mirror of it at [github.com/openssl/openssl],
which is updated automatically from the former on every commit.
-A local copy of the Git Repository can be obtained by cloning it from
-the original OpenSSL repository using
-
- git clone git://git.openssl.org/openssl.git
-
-or from the GitHub mirror using
+A local copy of the Git repository can be obtained by cloning it from
+the GitHub mirror using
git clone https://github.com/openssl/openssl.git
If you intend to contribute to OpenSSL, either to fix bugs or contribute
-new features, you need to fork the OpenSSL repository openssl/openssl on
-GitHub and clone your public fork instead.
+new features, you need to fork the GitHub mirror and clone your public fork
+instead.
git clone https://github.com/yourname/openssl.git
@@ -166,7 +162,7 @@
Copyright
=========
-Copyright (c) 1998-2024 The OpenSSL Project
+Copyright (c) 1998-2025 The OpenSSL Project
Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
@@ -178,14 +174,6 @@
<https://www.openssl.org>
"OpenSSL Homepage"
-[git.openssl.org]:
- <https://git.openssl.org>
- "OpenSSL Git Repository"
-
-[git.openssl.org]:
- <https://git.openssl.org>
- "OpenSSL Git Repository"
-
[github.com/openssl/openssl]:
<https://github.com/openssl/openssl>
"OpenSSL GitHub Mirror"
diff --git a/crypto/openssl/VERSION.dat b/crypto/openssl/VERSION.dat
--- a/crypto/openssl/VERSION.dat
+++ b/crypto/openssl/VERSION.dat
@@ -1,7 +1,7 @@
MAJOR=3
MINOR=0
-PATCH=15
+PATCH=16
PRE_RELEASE_TAG=
BUILD_METADATA=
-RELEASE_DATE="3 Sep 2024"
+RELEASE_DATE="11 Feb 2025"
SHLIB_VERSION=3
diff --git a/crypto/openssl/apps/asn1parse.c b/crypto/openssl/apps/asn1parse.c
--- a/crypto/openssl/apps/asn1parse.c
+++ b/crypto/openssl/apps/asn1parse.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1995-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -127,7 +127,8 @@
dump = strtol(opt_arg(), NULL, 0);
break;
case OPT_STRPARSE:
- sk_OPENSSL_STRING_push(osk, opt_arg());
+ if (sk_OPENSSL_STRING_push(osk, opt_arg()) <= 0)
+ goto end;
break;
case OPT_GENSTR:
genstr = opt_arg();
diff --git a/crypto/openssl/apps/cms.c b/crypto/openssl/apps/cms.c
--- a/crypto/openssl/apps/cms.c
+++ b/crypto/openssl/apps/cms.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2008-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -494,13 +494,15 @@
if (rr_from == NULL
&& (rr_from = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(rr_from, opt_arg());
+ if (sk_OPENSSL_STRING_push(rr_from, opt_arg()) <= 0)
+ goto end;
break;
case OPT_RR_TO:
if (rr_to == NULL
&& (rr_to = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(rr_to, opt_arg());
+ if (sk_OPENSSL_STRING_push(rr_to, opt_arg()) <= 0)
+ goto end;
break;
case OPT_PRINT:
noout = print = 1;
@@ -577,13 +579,15 @@
if (sksigners == NULL
&& (sksigners = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(sksigners, signerfile);
+ if (sk_OPENSSL_STRING_push(sksigners, signerfile) <= 0)
+ goto end;
if (keyfile == NULL)
keyfile = signerfile;
if (skkeys == NULL
&& (skkeys = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(skkeys, keyfile);
+ if (sk_OPENSSL_STRING_push(skkeys, keyfile) <= 0)
+ goto end;
keyfile = NULL;
}
signerfile = opt_arg();
@@ -601,12 +605,14 @@
if (sksigners == NULL
&& (sksigners = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(sksigners, signerfile);
+ if (sk_OPENSSL_STRING_push(sksigners, signerfile) <= 0)
+ goto end;
signerfile = NULL;
if (skkeys == NULL
&& (skkeys = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(skkeys, keyfile);
+ if (sk_OPENSSL_STRING_push(skkeys, keyfile) <= 0)
+ goto end;
}
keyfile = opt_arg();
break;
@@ -660,7 +666,8 @@
key_param->next = nparam;
key_param = nparam;
}
- sk_OPENSSL_STRING_push(key_param->param, opt_arg());
+ if (sk_OPENSSL_STRING_push(key_param->param, opt_arg()) <= 0)
+ goto end;
break;
case OPT_V_CASES:
if (!opt_verify(o, vpm))
@@ -749,12 +756,14 @@
if (sksigners == NULL
&& (sksigners = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(sksigners, signerfile);
+ if (sk_OPENSSL_STRING_push(sksigners, signerfile) <= 0)
+ goto end;
if (skkeys == NULL && (skkeys = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
if (keyfile == NULL)
keyfile = signerfile;
- sk_OPENSSL_STRING_push(skkeys, keyfile);
+ if (sk_OPENSSL_STRING_push(skkeys, keyfile) <= 0)
+ goto end;
}
if (sksigners == NULL) {
BIO_printf(bio_err, "No signer certificate specified\n");
@@ -1014,8 +1023,15 @@
pwri_tmp = NULL;
}
if (!(flags & CMS_STREAM)) {
- if (!CMS_final(cms, in, NULL, flags))
+ if (!CMS_final(cms, in, NULL, flags)) {
+ if (originator != NULL
+ && ERR_GET_REASON(ERR_peek_error())
+ == CMS_R_ERROR_UNSUPPORTED_STATIC_KEY_AGREEMENT) {
+ BIO_printf(bio_err, "Cannot use originator for encryption\n");
+ goto end;
+ }
goto end;
+ }
}
} else if (operation == SMIME_ENCRYPTED_ENCRYPT) {
cms = CMS_EncryptedData_encrypt_ex(in, cipher, secret_key,
@@ -1261,6 +1277,7 @@
X509_free(cert);
X509_free(recip);
X509_free(signer);
+ X509_free(originator);
EVP_PKEY_free(key);
EVP_CIPHER_free(cipher);
EVP_CIPHER_free(wrap_cipher);
diff --git a/crypto/openssl/apps/engine.c b/crypto/openssl/apps/engine.c
--- a/crypto/openssl/apps/engine.c
+++ b/crypto/openssl/apps/engine.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2000-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2000-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -352,10 +352,12 @@
test_avail++;
break;
case OPT_PRE:
- sk_OPENSSL_STRING_push(pre_cmds, opt_arg());
+ if (sk_OPENSSL_STRING_push(pre_cmds, opt_arg()) <= 0)
+ goto end;
break;
case OPT_POST:
- sk_OPENSSL_STRING_push(post_cmds, opt_arg());
+ if (sk_OPENSSL_STRING_push(post_cmds, opt_arg()) <= 0)
+ goto end;
break;
}
}
diff --git a/crypto/openssl/apps/lib/http_server.c b/crypto/openssl/apps/lib/http_server.c
--- a/crypto/openssl/apps/lib/http_server.c
+++ b/crypto/openssl/apps/lib/http_server.c
@@ -220,14 +220,17 @@
{
BIO *acbio = NULL, *bufbio;
int asock;
+ char name[40];
+ snprintf(name, sizeof(name), "[::]:%s", port); /* port may be "0" */
bufbio = BIO_new(BIO_f_buffer());
if (bufbio == NULL)
goto err;
acbio = BIO_new(BIO_s_accept());
if (acbio == NULL
- || BIO_set_bind_mode(acbio, BIO_BIND_REUSEADDR) < 0
- || BIO_set_accept_port(acbio, port) < 0) {
+ || BIO_set_accept_ip_family(acbio, BIO_FAMILY_IPANY) <= 0 /* IPv4/6 */
+ || BIO_set_bind_mode(acbio, BIO_BIND_REUSEADDR) <= 0
+ || BIO_set_accept_name(acbio, name) <= 0) {
log_message(prog, LOG_ERR, "Error setting up accept BIO");
goto err;
}
diff --git a/crypto/openssl/apps/lib/s_cb.c b/crypto/openssl/apps/lib/s_cb.c
--- a/crypto/openssl/apps/lib/s_cb.c
+++ b/crypto/openssl/apps/lib/s_cb.c
@@ -240,10 +240,10 @@
return "ECDSA";
case NID_ED25519:
- return "Ed25519";
+ return "ed25519";
case NID_ED448:
- return "Ed448";
+ return "ed448";
case NID_id_GostR3410_2001:
return "gost2001";
@@ -288,6 +288,26 @@
SSL_get_sigalgs(s, i, &sign_nid, &hash_nid, NULL, &rsign, &rhash);
if (i)
BIO_puts(out, ":");
+ switch (rsign | rhash << 8) {
+ case 0x0809:
+ BIO_puts(out, "rsa_pss_pss_sha256");
+ continue;
+ case 0x080a:
+ BIO_puts(out, "rsa_pss_pss_sha384");
+ continue;
+ case 0x080b:
+ BIO_puts(out, "rsa_pss_pss_sha512");
+ continue;
+ case 0x081a:
+ BIO_puts(out, "ecdsa_brainpoolP256r1_sha256");
+ continue;
+ case 0x081b:
+ BIO_puts(out, "ecdsa_brainpoolP384r1_sha384");
+ continue;
+ case 0x081c:
+ BIO_puts(out, "ecdsa_brainpoolP512r1_sha512");
+ continue;
+ }
sstr = get_sigtype(sign_nid);
if (sstr)
BIO_printf(out, "%s", sstr);
diff --git a/crypto/openssl/apps/lib/s_socket.c b/crypto/openssl/apps/lib/s_socket.c
--- a/crypto/openssl/apps/lib/s_socket.c
+++ b/crypto/openssl/apps/lib/s_socket.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1995-2022 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -380,6 +380,12 @@
BIO_closesocket(asock);
break;
}
+
+ if (naccept != -1)
+ naccept--;
+ if (naccept == 0)
+ BIO_closesocket(asock);
+
BIO_set_tcp_ndelay(sock, 1);
i = (*cb)(sock, type, protocol, context);
@@ -410,11 +416,12 @@
BIO_closesocket(sock);
} else {
+ if (naccept != -1)
+ naccept--;
+
i = (*cb)(asock, type, protocol, context);
}
- if (naccept != -1)
- naccept--;
if (i < 0 || naccept == 0) {
BIO_closesocket(asock);
ret = i;
diff --git a/crypto/openssl/apps/lib/vms_term_sock.c b/crypto/openssl/apps/lib/vms_term_sock.c
--- a/crypto/openssl/apps/lib/vms_term_sock.c
+++ b/crypto/openssl/apps/lib/vms_term_sock.c
@@ -353,7 +353,7 @@
/*
** Get the binary (64-bit) time of the specified timeout value
*/
- sprintf (AscTimeBuff, "0 0:0:%02d.00", SOCKET_PAIR_TIMEOUT_VALUE);
+ BIO_snprintf(AscTimeBuff, sizeof(AscTimeBuff), "0 0:0:%02d.00", SOCKET_PAIR_TIMEOUT_VALUE);
AscTimeDesc.dsc$w_length = strlen (AscTimeBuff);
AscTimeDesc.dsc$a_pointer = AscTimeBuff;
status = sys$bintim (&AscTimeDesc, BinTimeBuff);
@@ -567,10 +567,10 @@
/*
** Format the message buffer
*/
- sprintf (MsgBuff, "%02d-%s-%04d %02d:%02d:%02d [%08X] %s\n",
- LocTime->tm_mday, Month[LocTime->tm_mon],
- (LocTime->tm_year + 1900), LocTime->tm_hour, LocTime->tm_min,
- LocTime->tm_sec, pid, msg);
+ BIO_snprintf(MsgBuff, sizeof(MsgBuff), "%02d-%s-%04d %02d:%02d:%02d [%08X] %s\n",
+ LocTime->tm_mday, Month[LocTime->tm_mon],
+ (LocTime->tm_year + 1900), LocTime->tm_hour, LocTime->tm_min,
+ LocTime->tm_sec, pid, msg);
/*
** Get any variable arguments and add them to the print of the message
diff --git a/crypto/openssl/apps/passwd.c b/crypto/openssl/apps/passwd.c
--- a/crypto/openssl/apps/passwd.c
+++ b/crypto/openssl/apps/passwd.c
@@ -589,7 +589,8 @@
OPENSSL_strlcat(out_buf, ascii_dollar, sizeof(out_buf));
if (rounds_custom) {
char tmp_buf[80]; /* "rounds=999999999" */
- sprintf(tmp_buf, "rounds=%u", rounds);
+
+ BIO_snprintf(tmp_buf, sizeof(tmp_buf), "rounds=%u", rounds);
#ifdef CHARSET_EBCDIC
/* In case we're really on a ASCII based platform and just pretend */
if (tmp_buf[0] != 0x72) /* ASCII 'r' */
diff --git a/crypto/openssl/apps/pkcs12.c b/crypto/openssl/apps/pkcs12.c
--- a/crypto/openssl/apps/pkcs12.c
+++ b/crypto/openssl/apps/pkcs12.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1999-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1999-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -305,7 +305,8 @@
if (canames == NULL
&& (canames = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(canames, opt_arg());
+ if (sk_OPENSSL_STRING_push(canames, opt_arg()) <= 0)
+ goto end;
break;
case OPT_IN:
infile = opt_arg();
diff --git a/crypto/openssl/apps/pkeyutl.c b/crypto/openssl/apps/pkeyutl.c
--- a/crypto/openssl/apps/pkeyutl.c
+++ b/crypto/openssl/apps/pkeyutl.c
@@ -81,10 +81,11 @@
OPT_SECTION("Output"),
{"out", OPT_OUT, '>', "Output file - default stdout"},
- {"asn1parse", OPT_ASN1PARSE, '-', "asn1parse the output data"},
+ {"asn1parse", OPT_ASN1PARSE, '-',
+ "parse the output as ASN.1 data to check its DER encoding and print errors"},
{"hexdump", OPT_HEXDUMP, '-', "Hex dump output"},
{"verifyrecover", OPT_VERIFYRECOVER, '-',
- "Verify with public key, recover original data"},
+ "Verify RSA signature, recovering original signature input data"},
OPT_SECTION("Signing/Derivation"),
{"digest", OPT_DIGEST, 's',
diff --git a/crypto/openssl/apps/rehash.c b/crypto/openssl/apps/rehash.c
--- a/crypto/openssl/apps/rehash.c
+++ b/crypto/openssl/apps/rehash.c
@@ -559,6 +559,11 @@
} else if ((env = getenv(X509_get_default_cert_dir_env())) != NULL) {
char lsc[2] = { LIST_SEPARATOR_CHAR, '\0' };
m = OPENSSL_strdup(env);
+ if (m == NULL) {
+ BIO_puts(bio_err, "out of memory\n");
+ errs = 1;
+ goto end;
+ }
for (e = strtok(m, lsc); e != NULL; e = strtok(NULL, lsc))
errs += do_dir(e, h);
OPENSSL_free(m);
diff --git a/crypto/openssl/apps/smime.c b/crypto/openssl/apps/smime.c
--- a/crypto/openssl/apps/smime.c
+++ b/crypto/openssl/apps/smime.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1999-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1999-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -279,13 +279,15 @@
if (sksigners == NULL
&& (sksigners = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(sksigners, signerfile);
+ if (sk_OPENSSL_STRING_push(sksigners, signerfile) <= 0)
+ goto end;
if (keyfile == NULL)
keyfile = signerfile;
if (skkeys == NULL
&& (skkeys = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(skkeys, keyfile);
+ if (sk_OPENSSL_STRING_push(skkeys, keyfile) <= 0)
+ goto end;
keyfile = NULL;
}
signerfile = opt_arg();
@@ -310,12 +312,14 @@
if (sksigners == NULL
&& (sksigners = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(sksigners, signerfile);
+ if (sk_OPENSSL_STRING_push(sksigners, signerfile) <= 0)
+ goto end;
signerfile = NULL;
if (skkeys == NULL
&& (skkeys = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(skkeys, keyfile);
+ if (sk_OPENSSL_STRING_push(skkeys, keyfile) <= 0)
+ goto end;
}
keyfile = opt_arg();
break;
@@ -390,12 +394,14 @@
if (sksigners == NULL
&& (sksigners = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
- sk_OPENSSL_STRING_push(sksigners, signerfile);
+ if (sk_OPENSSL_STRING_push(sksigners, signerfile) <= 0)
+ goto end;
if (!skkeys && (skkeys = sk_OPENSSL_STRING_new_null()) == NULL)
goto end;
if (!keyfile)
keyfile = signerfile;
- sk_OPENSSL_STRING_push(skkeys, keyfile);
+ if (sk_OPENSSL_STRING_push(skkeys, keyfile) <= 0)
+ goto end;
}
if (sksigners == NULL) {
BIO_printf(bio_err, "No signer certificate specified\n");
diff --git a/crypto/openssl/apps/speed.c b/crypto/openssl/apps/speed.c
--- a/crypto/openssl/apps/speed.c
+++ b/crypto/openssl/apps/speed.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1995-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
* Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
@@ -456,6 +456,14 @@
#define COND(unused_cond) (run && count < INT_MAX)
#define COUNT(d) (count)
+#define TAG_LEN 16
+
+static unsigned int mode_op; /* AE Mode of operation */
+static unsigned int aead = 0; /* AEAD flag */
+static unsigned char aead_iv[12]; /* For AEAD modes */
+static unsigned char aad[EVP_AEAD_TLS1_AAD_LEN] = { 0xcc };
+static int aead_ivlen = sizeof(aead_iv);
+
typedef struct loopargs_st {
ASYNC_JOB *inprogress_job;
ASYNC_WAIT_CTX *wait_ctx;
@@ -464,6 +472,7 @@
unsigned char *buf_malloc;
unsigned char *buf2_malloc;
unsigned char *key;
+ unsigned char tag[TAG_LEN];
size_t buflen;
size_t sigsize;
EVP_PKEY_CTX *rsa_sign_ctx[RSA_NUM];
@@ -727,12 +736,8 @@
unsigned char *buf = tempargs->buf;
EVP_CIPHER_CTX *ctx = tempargs->ctx;
int outl, count, rc;
- unsigned char faketag[16] = { 0xcc };
if (decrypt) {
- if (EVP_CIPHER_get_flags(EVP_CIPHER_CTX_get0_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER) {
- (void)EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG, sizeof(faketag), faketag);
- }
for (count = 0; COND(c[D_EVP][testnum]); count++) {
rc = EVP_DecryptUpdate(ctx, buf, &outl, buf, lengths[testnum]);
if (rc != 1) {
@@ -757,74 +762,159 @@
}
/*
+ * To make AEAD benchmarking more relevant perform TLS-like operations,
+ * 13-byte AAD followed by payload. But don't use TLS-formatted AAD, as
+ * payload length is not actually limited by 16KB...
* CCM does not support streaming. For the purpose of performance measurement,
* each message is encrypted using the same (key,iv)-pair. Do not use this
* code in your application.
*/
-static int EVP_Update_loop_ccm(void *args)
+static int EVP_Update_loop_aead_enc(void *args)
{
loopargs_t *tempargs = *(loopargs_t **) args;
unsigned char *buf = tempargs->buf;
+ unsigned char *key = tempargs->key;
EVP_CIPHER_CTX *ctx = tempargs->ctx;
- int outl, count;
- unsigned char tag[12];
-
- if (decrypt) {
- for (count = 0; COND(c[D_EVP][testnum]); count++) {
- (void)EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG, sizeof(tag),
- tag);
- /* reset iv */
- (void)EVP_DecryptInit_ex(ctx, NULL, NULL, NULL, iv);
- /* counter is reset on every update */
- (void)EVP_DecryptUpdate(ctx, buf, &outl, buf, lengths[testnum]);
+ int outl, count, realcount = 0;
+
+ for (count = 0; COND(c[D_EVP][testnum]); count++) {
+ /* Set length of iv (Doesn't apply to SIV mode) */
+ if (mode_op != EVP_CIPH_SIV_MODE) {
+ if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_IVLEN,
+ aead_ivlen, NULL)) {
+ BIO_printf(bio_err, "\nFailed to set iv length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
}
- } else {
- for (count = 0; COND(c[D_EVP][testnum]); count++) {
- /* restore iv length field */
- (void)EVP_EncryptUpdate(ctx, NULL, &outl, NULL, lengths[testnum]);
- /* counter is reset on every update */
- (void)EVP_EncryptUpdate(ctx, buf, &outl, buf, lengths[testnum]);
+ /* Set tag_len (Not for GCM/SIV at encryption stage) */
+ if (mode_op != EVP_CIPH_GCM_MODE
+ && mode_op != EVP_CIPH_SIV_MODE) {
+ if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG,
+ TAG_LEN, NULL)) {
+ BIO_printf(bio_err, "\nFailed to set tag length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, aead_iv, -1)) {
+ BIO_printf(bio_err, "\nFailed to set key and iv\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ /* Set total length of input. Only required for CCM */
+ if (mode_op == EVP_CIPH_CCM_MODE) {
+ if (!EVP_EncryptUpdate(ctx, NULL, &outl,
+ NULL, lengths[testnum])) {
+ BIO_printf(bio_err, "\nCouldn't set input text length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
}
+ if (aead) {
+ if (!EVP_EncryptUpdate(ctx, NULL, &outl, aad, sizeof(aad))) {
+ BIO_printf(bio_err, "\nCouldn't insert AAD when encrypting\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ if (!EVP_EncryptUpdate(ctx, buf, &outl, buf, lengths[testnum])) {
+ BIO_printf(bio_err, "\nFailed to encrypt the data\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ if (EVP_EncryptFinal_ex(ctx, buf, &outl))
+ realcount++;
}
- if (decrypt)
- (void)EVP_DecryptFinal_ex(ctx, buf, &outl);
- else
- (void)EVP_EncryptFinal_ex(ctx, buf, &outl);
- return count;
+ return realcount;
}
/*
* To make AEAD benchmarking more relevant perform TLS-like operations,
* 13-byte AAD followed by payload. But don't use TLS-formatted AAD, as
* payload length is not actually limited by 16KB...
+ * CCM does not support streaming. For the purpose of performance measurement,
+ * each message is decrypted using the same (key,iv)-pair. Do not use this
+ * code in your application.
+ * For decryption, we will use buf2 to preserve the input text in buf.
*/
-static int EVP_Update_loop_aead(void *args)
+static int EVP_Update_loop_aead_dec(void *args)
{
loopargs_t *tempargs = *(loopargs_t **) args;
unsigned char *buf = tempargs->buf;
+ unsigned char *outbuf = tempargs->buf2;
+ unsigned char *key = tempargs->key;
+ unsigned char tag[TAG_LEN];
EVP_CIPHER_CTX *ctx = tempargs->ctx;
- int outl, count;
- unsigned char aad[13] = { 0xcc };
- unsigned char faketag[16] = { 0xcc };
+ int outl, count, realcount = 0;
+
+ for (count = 0; COND(c[D_EVP][testnum]); count++) {
+ /* Set the length of iv (Doesn't apply to SIV mode) */
+ if (mode_op != EVP_CIPH_SIV_MODE) {
+ if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_IVLEN,
+ aead_ivlen, NULL)) {
+ BIO_printf(bio_err, "\nFailed to set iv length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
- if (decrypt) {
- for (count = 0; COND(c[D_EVP][testnum]); count++) {
- (void)EVP_DecryptInit_ex(ctx, NULL, NULL, NULL, iv);
- (void)EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG,
- sizeof(faketag), faketag);
- (void)EVP_DecryptUpdate(ctx, NULL, &outl, aad, sizeof(aad));
- (void)EVP_DecryptUpdate(ctx, buf, &outl, buf, lengths[testnum]);
- (void)EVP_DecryptFinal_ex(ctx, buf + outl, &outl);
+ /* Set the tag length (Doesn't apply to SIV mode) */
+ if (mode_op != EVP_CIPH_SIV_MODE
+ && mode_op != EVP_CIPH_GCM_MODE) {
+ if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG,
+ TAG_LEN, NULL)) {
+ BIO_printf(bio_err, "\nFailed to set tag length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
}
- } else {
- for (count = 0; COND(c[D_EVP][testnum]); count++) {
- (void)EVP_EncryptInit_ex(ctx, NULL, NULL, NULL, iv);
- (void)EVP_EncryptUpdate(ctx, NULL, &outl, aad, sizeof(aad));
- (void)EVP_EncryptUpdate(ctx, buf, &outl, buf, lengths[testnum]);
- (void)EVP_EncryptFinal_ex(ctx, buf + outl, &outl);
+ if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, aead_iv, -1)) {
+ BIO_printf(bio_err, "\nFailed to set key and iv\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ /* Set iv before decryption (Doesn't apply to SIV mode) */
+ if (mode_op != EVP_CIPH_SIV_MODE) {
+ if (!EVP_DecryptInit_ex(ctx, NULL, NULL, NULL, aead_iv)) {
+ BIO_printf(bio_err, "\nFailed to set iv\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ memcpy(tag, tempargs->tag, TAG_LEN);
+
+ if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG,
+ TAG_LEN, tag)) {
+ BIO_printf(bio_err, "\nFailed to set tag\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ /* Set the total length of cipher text. Only required for CCM */
+ if (mode_op == EVP_CIPH_CCM_MODE) {
+ if (!EVP_DecryptUpdate(ctx, NULL, &outl,
+ NULL, lengths[testnum])) {
+ BIO_printf(bio_err, "\nCouldn't set cipher text length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ if (aead) {
+ if (!EVP_DecryptUpdate(ctx, NULL, &outl, aad, sizeof(aad))) {
+ BIO_printf(bio_err, "\nCouldn't insert AAD when decrypting\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ if (!EVP_DecryptUpdate(ctx, outbuf, &outl, buf, lengths[testnum])) {
+ BIO_printf(bio_err, "\nFailed to decrypt the data\n");
+ ERR_print_errors(bio_err);
+ exit(1);
}
+ if (EVP_DecryptFinal_ex(ctx, outbuf, &outl))
+ realcount++;
}
- return count;
+ return realcount;
}
static long rsa_c[RSA_NUM][2]; /* # RSA iteration test */
@@ -1370,11 +1460,11 @@
OPTION_CHOICE o;
int async_init = 0, multiblock = 0, pr_header = 0;
uint8_t doit[ALGOR_NUM] = { 0 };
- int ret = 1, misalign = 0, lengths_single = 0, aead = 0;
+ int ret = 1, misalign = 0, lengths_single = 0;
long count = 0;
unsigned int size_num = SIZE_NUM;
unsigned int i, k, loopargs_len = 0, async_jobs = 0;
- int keylen;
+ int keylen = 0;
int buflen;
BIGNUM *bn = NULL;
EVP_PKEY_CTX *genctx = NULL;
@@ -2001,15 +2091,14 @@
if (doit[D_HMAC]) {
static const char hmac_key[] = "This is a key...";
int len = strlen(hmac_key);
+ size_t hmac_name_len = sizeof("hmac()") + strlen(evp_mac_mdname);
OSSL_PARAM params[3];
mac = EVP_MAC_fetch(app_get0_libctx(), "HMAC", app_get0_propq());
if (mac == NULL || evp_mac_mdname == NULL)
goto end;
-
- evp_hmac_name = app_malloc(sizeof("hmac()") + strlen(evp_mac_mdname),
- "HMAC name");
- sprintf(evp_hmac_name, "hmac(%s)", evp_mac_mdname);
+ evp_hmac_name = app_malloc(hmac_name_len, "HMAC name");
+ BIO_snprintf(evp_hmac_name, hmac_name_len, "hmac(%s)", evp_mac_mdname);
names[D_HMAC] = evp_hmac_name;
params[0] =
@@ -2213,12 +2302,20 @@
}
}
+ /*-
+ * There are three scenarios for D_EVP:
+ * 1- Using authenticated encryption (AE) e.g. CCM, GCM, OCB etc.
+ * 2- Using AE + associated data (AD) i.e. AEAD using CCM, GCM, OCB etc.
+ * 3- Not using AE or AD e.g. ECB, CBC, CFB etc.
+ */
if (doit[D_EVP]) {
if (evp_cipher != NULL) {
- int (*loopfunc) (void *) = EVP_Update_loop;
+ int (*loopfunc) (void *);
+ int outlen = 0;
+ unsigned int ae_mode = 0;
- if (multiblock && (EVP_CIPHER_get_flags(evp_cipher) &
- EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK)) {
+ if (multiblock && (EVP_CIPHER_get_flags(evp_cipher)
+ & EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK)) {
multiblock_speed(evp_cipher, lengths_single, &seconds);
ret = 0;
goto end;
@@ -2226,16 +2323,26 @@
names[D_EVP] = EVP_CIPHER_get0_name(evp_cipher);
- if (EVP_CIPHER_get_mode(evp_cipher) == EVP_CIPH_CCM_MODE) {
- loopfunc = EVP_Update_loop_ccm;
- } else if (aead && (EVP_CIPHER_get_flags(evp_cipher) &
- EVP_CIPH_FLAG_AEAD_CIPHER)) {
- loopfunc = EVP_Update_loop_aead;
+ mode_op = EVP_CIPHER_get_mode(evp_cipher);
+
+ if (aead) {
if (lengths == lengths_list) {
lengths = aead_lengths_list;
size_num = OSSL_NELEM(aead_lengths_list);
}
}
+ if (mode_op == EVP_CIPH_GCM_MODE
+ || mode_op == EVP_CIPH_CCM_MODE
+ || mode_op == EVP_CIPH_OCB_MODE
+ || mode_op == EVP_CIPH_SIV_MODE) {
+ ae_mode = 1;
+ if (decrypt)
+ loopfunc = EVP_Update_loop_aead_dec;
+ else
+ loopfunc = EVP_Update_loop_aead_enc;
+ } else {
+ loopfunc = EVP_Update_loop;
+ }
for (testnum = 0; testnum < size_num; testnum++) {
print_message(names[D_EVP], c[D_EVP][testnum], lengths[testnum],
@@ -2247,37 +2354,144 @@
BIO_printf(bio_err, "\nEVP_CIPHER_CTX_new failure\n");
exit(1);
}
- if (!EVP_CipherInit_ex(loopargs[k].ctx, evp_cipher, NULL,
- NULL, iv, decrypt ? 0 : 1)) {
- BIO_printf(bio_err, "\nEVP_CipherInit_ex failure\n");
+
+ /*
+ * For AE modes, we must first encrypt the data to get
+ * a valid tag that enables us to decrypt. If we don't
+ * encrypt first, we won't have a valid tag that enables
+ * authenticity and hence decryption will fail.
+ */
+ if (!EVP_CipherInit_ex(loopargs[k].ctx,
+ evp_cipher, NULL, NULL, NULL,
+ ae_mode ? 1 : !decrypt)) {
+ BIO_printf(bio_err, "\nCouldn't init the context\n");
ERR_print_errors(bio_err);
exit(1);
}
+ /* Padding isn't needed */
EVP_CIPHER_CTX_set_padding(loopargs[k].ctx, 0);
keylen = EVP_CIPHER_CTX_get_key_length(loopargs[k].ctx);
loopargs[k].key = app_malloc(keylen, "evp_cipher key");
EVP_CIPHER_CTX_rand_key(loopargs[k].ctx, loopargs[k].key);
- if (!EVP_CipherInit_ex(loopargs[k].ctx, NULL, NULL,
- loopargs[k].key, NULL, -1)) {
- BIO_printf(bio_err, "\nEVP_CipherInit_ex failure\n");
- ERR_print_errors(bio_err);
- exit(1);
- }
- OPENSSL_clear_free(loopargs[k].key, keylen);
- /* SIV mode only allows for a single Update operation */
- if (EVP_CIPHER_get_mode(evp_cipher) == EVP_CIPH_SIV_MODE)
- (void)EVP_CIPHER_CTX_ctrl(loopargs[k].ctx,
- EVP_CTRL_SET_SPEED, 1, NULL);
+ if (!ae_mode) {
+ if (!EVP_CipherInit_ex(loopargs[k].ctx, NULL, NULL,
+ loopargs[k].key, iv, -1)) {
+ BIO_printf(bio_err, "\nFailed to set the key\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ } else if (mode_op == EVP_CIPH_SIV_MODE) {
+ EVP_CIPHER_CTX_ctrl(loopargs[k].ctx,
+ EVP_CTRL_SET_SPEED, 1, NULL);
+ }
+ if (ae_mode && decrypt) {
+ /* Set length of iv (Doesn't apply to SIV mode) */
+ if (mode_op != EVP_CIPH_SIV_MODE) {
+ if (!EVP_CIPHER_CTX_ctrl(loopargs[k].ctx,
+ EVP_CTRL_AEAD_SET_IVLEN,
+ aead_ivlen, NULL)) {
+ BIO_printf(bio_err, "\nFailed to set iv length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ /* Set tag_len (Not for SIV at encryption stage) */
+ if (mode_op != EVP_CIPH_GCM_MODE
+ && mode_op != EVP_CIPH_SIV_MODE) {
+ if (!EVP_CIPHER_CTX_ctrl(loopargs[k].ctx,
+ EVP_CTRL_AEAD_SET_TAG,
+ TAG_LEN, NULL)) {
+ BIO_printf(bio_err,
+ "\nFailed to set tag length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ if (!EVP_CipherInit_ex(loopargs[k].ctx, NULL, NULL,
+ loopargs[k].key, aead_iv, -1)) {
+ BIO_printf(bio_err, "\nFailed to set the key\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ /* Set total length of input. Only required for CCM */
+ if (mode_op == EVP_CIPH_CCM_MODE) {
+ if (!EVP_EncryptUpdate(loopargs[k].ctx, NULL,
+ &outlen, NULL,
+ lengths[testnum])) {
+ BIO_printf(bio_err,
+ "\nCouldn't set input text length\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ if (aead) {
+ if (!EVP_EncryptUpdate(loopargs[k].ctx, NULL,
+ &outlen, aad, sizeof(aad))) {
+ BIO_printf(bio_err,
+ "\nCouldn't insert AAD when encrypting\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+ }
+ if (!EVP_EncryptUpdate(loopargs[k].ctx, loopargs[k].buf,
+ &outlen, loopargs[k].buf,
+ lengths[testnum])) {
+ BIO_printf(bio_err,
+ "\nFailed to to encrypt the data\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+
+ if (!EVP_EncryptFinal_ex(loopargs[k].ctx,
+ loopargs[k].buf, &outlen)) {
+ BIO_printf(bio_err,
+ "\nFailed finalize the encryption\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+
+ if (!EVP_CIPHER_CTX_ctrl(loopargs[k].ctx,
+ EVP_CTRL_AEAD_GET_TAG,
+ TAG_LEN, &loopargs[k].tag)) {
+ BIO_printf(bio_err, "\nFailed to get the tag\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+
+ EVP_CIPHER_CTX_free(loopargs[k].ctx);
+ loopargs[k].ctx = EVP_CIPHER_CTX_new();
+ if (loopargs[k].ctx == NULL) {
+ BIO_printf(bio_err,
+ "\nEVP_CIPHER_CTX_new failure\n");
+ exit(1);
+ }
+ if (!EVP_CipherInit_ex(loopargs[k].ctx, evp_cipher,
+ NULL, NULL, NULL, 0)) {
+ BIO_printf(bio_err,
+ "\nFailed initializing the context\n");
+ ERR_print_errors(bio_err);
+ exit(1);
+ }
+
+ EVP_CIPHER_CTX_set_padding(loopargs[k].ctx, 0);
+
+ /* SIV only allows for one Update operation */
+ if (mode_op == EVP_CIPH_SIV_MODE)
+ EVP_CIPHER_CTX_ctrl(loopargs[k].ctx,
+ EVP_CTRL_SET_SPEED, 1, NULL);
+ }
}
Time_F(START);
count = run_benchmark(async_jobs, loopfunc, loopargs);
d = Time_F(STOP);
- for (k = 0; k < loopargs_len; k++)
+ for (k = 0; k < loopargs_len; k++) {
+ OPENSSL_clear_free(loopargs[k].key, keylen);
EVP_CIPHER_CTX_free(loopargs[k].ctx);
+ }
print_result(D_EVP, testnum, count, d);
}
} else if (evp_md_name != NULL) {
@@ -2297,6 +2511,7 @@
}
if (doit[D_EVP_CMAC]) {
+ size_t len = sizeof("cmac()") + strlen(evp_mac_ciphername);
OSSL_PARAM params[3];
EVP_CIPHER *cipher = NULL;
@@ -2312,9 +2527,8 @@
BIO_printf(bio_err, "\nRequested CMAC cipher with unsupported key length.\n");
goto end;
}
- evp_cmac_name = app_malloc(sizeof("cmac()")
- + strlen(evp_mac_ciphername), "CMAC name");
- sprintf(evp_cmac_name, "cmac(%s)", evp_mac_ciphername);
+ evp_cmac_name = app_malloc(len, "CMAC name");
+ BIO_snprintf(evp_cmac_name, len, "cmac(%s)", evp_mac_ciphername);
names[D_EVP_CMAC] = evp_cmac_name;
params[0] = OSSL_PARAM_construct_utf8_string(OSSL_ALG_PARAM_CIPHER,
@@ -3675,7 +3889,6 @@
print_message(alg_name, 0, mblengths[j], seconds->sym);
Time_F(START);
for (count = 0; run && count < INT_MAX; count++) {
- unsigned char aad[EVP_AEAD_TLS1_AAD_LEN];
EVP_CTRL_TLS1_1_MULTIBLOCK_PARAM mb_param;
size_t len = mblengths[j];
int packlen;
diff --git a/crypto/openssl/configdata.pm.in b/crypto/openssl/configdata.pm.in
--- a/crypto/openssl/configdata.pm.in
+++ b/crypto/openssl/configdata.pm.in
@@ -145,7 +145,7 @@
# defined in one template stick around for the
# next, making them combinable
PACKAGE => 'OpenSSL::safe')
- or die $Text::Template::ERROR;
+ or die $OpenSSL::Template::ERROR;
close BUILDFILE;
rename("$buildfile.new", $buildfile)
or die "Trying to rename $buildfile.new to $buildfile: $!";
@@ -167,7 +167,7 @@
# defined in one template stick around for the
# next, making them combinable
PACKAGE => 'OpenSSL::safe')
- or die $Text::Template::ERROR;
+ or die $OpenSSL::Template::ERROR;
close CONFIGURATION_H;
# When using stat() on Windows, we can get it to perform better by
diff --git a/crypto/openssl/crypto/asn1/a_bitstr.c b/crypto/openssl/crypto/asn1/a_bitstr.c
--- a/crypto/openssl/crypto/asn1/a_bitstr.c
+++ b/crypto/openssl/crypto/asn1/a_bitstr.c
@@ -36,25 +36,30 @@
if (a->data[len - 1])
break;
}
- j = a->data[len - 1];
- if (j & 0x01)
+
+ if (len == 0) {
bits = 0;
- else if (j & 0x02)
- bits = 1;
- else if (j & 0x04)
- bits = 2;
- else if (j & 0x08)
- bits = 3;
- else if (j & 0x10)
- bits = 4;
- else if (j & 0x20)
- bits = 5;
- else if (j & 0x40)
- bits = 6;
- else if (j & 0x80)
- bits = 7;
- else
- bits = 0; /* should not happen */
+ } else {
+ j = a->data[len - 1];
+ if (j & 0x01)
+ bits = 0;
+ else if (j & 0x02)
+ bits = 1;
+ else if (j & 0x04)
+ bits = 2;
+ else if (j & 0x08)
+ bits = 3;
+ else if (j & 0x10)
+ bits = 4;
+ else if (j & 0x20)
+ bits = 5;
+ else if (j & 0x40)
+ bits = 6;
+ else if (j & 0x80)
+ bits = 7;
+ else
+ bits = 0; /* should not happen */
+ }
}
} else
bits = 0;
diff --git a/crypto/openssl/crypto/asn1/a_strnid.c b/crypto/openssl/crypto/asn1/a_strnid.c
--- a/crypto/openssl/crypto/asn1/a_strnid.c
+++ b/crypto/openssl/crypto/asn1/a_strnid.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1999-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1999-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -39,10 +39,10 @@
* This function sets the default to various "flavours" of configuration.
* based on an ASCII string. Currently this is:
* MASK:XXXX : a numerical mask value.
- * nobmp : Don't use BMPStrings (just Printable, T61).
- * pkix : PKIX recommendation in RFC2459.
- * utf8only : only use UTF8Strings (RFC2459 recommendation for 2004).
- * default: the default value, Printable, T61, BMP.
+ * default : use Printable, IA5, T61, BMP, and UTF8 string types
+ * nombstr : any string type except variable-sized BMPStrings or UTF8Strings
+ * pkix : PKIX recommendation in RFC2459
+ * utf8only : this is the default, use UTF8Strings
*/
int ASN1_STRING_set_default_mask_asc(const char *p)
diff --git a/crypto/openssl/crypto/asn1/a_time.c b/crypto/openssl/crypto/asn1/a_time.c
--- a/crypto/openssl/crypto/asn1/a_time.c
+++ b/crypto/openssl/crypto/asn1/a_time.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1999-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1999-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -488,9 +488,9 @@
int ossl_asn1_time_print_ex(BIO *bp, const ASN1_TIME *tm, unsigned long flags)
{
char *v;
- int gmt = 0, l;
+ int l;
struct tm stm;
- const char upper_z = 0x5A, period = 0x2E;
+ const char period = 0x2E;
/* ossl_asn1_time_to_tm will check the time type */
if (!ossl_asn1_time_to_tm(&stm, tm))
@@ -498,8 +498,6 @@
l = tm->length;
v = (char *)tm->data;
- if (v[l - 1] == upper_z)
- gmt = 1;
if (tm->type == V_ASN1_GENERALIZEDTIME) {
char *f = NULL;
@@ -510,39 +508,36 @@
* 'fraction point' in a GeneralizedTime string.
*/
if (tm->length > 15 && v[14] == period) {
- f = &v[14];
- f_len = 1;
- while (14 + f_len < l && ossl_ascii_isdigit(f[f_len]))
+ /* exclude the . itself */
+ f = &v[15];
+ f_len = 0;
+ while (15 + f_len < l && ossl_ascii_isdigit(f[f_len]))
++f_len;
}
- if ((flags & ASN1_DTFLGS_TYPE_MASK) == ASN1_DTFLGS_ISO8601) {
- return BIO_printf(bp, "%4d-%02d-%02d %02d:%02d:%02d%.*s%s",
- stm.tm_year + 1900, stm.tm_mon + 1,
- stm.tm_mday, stm.tm_hour,
- stm.tm_min, stm.tm_sec, f_len, f,
- (gmt ? "Z" : "")) > 0;
- }
- else {
- return BIO_printf(bp, "%s %2d %02d:%02d:%02d%.*s %d%s",
- _asn1_mon[stm.tm_mon], stm.tm_mday, stm.tm_hour,
- stm.tm_min, stm.tm_sec, f_len, f, stm.tm_year + 1900,
- (gmt ? " GMT" : "")) > 0;
+ if (f_len > 0) {
+ if ((flags & ASN1_DTFLGS_TYPE_MASK) == ASN1_DTFLGS_ISO8601) {
+ return BIO_printf(bp, "%4d-%02d-%02d %02d:%02d:%02d.%.*sZ",
+ stm.tm_year + 1900, stm.tm_mon + 1,
+ stm.tm_mday, stm.tm_hour,
+ stm.tm_min, stm.tm_sec, f_len, f) > 0;
+ } else {
+ return BIO_printf(bp, "%s %2d %02d:%02d:%02d.%.*s %d GMT",
+ _asn1_mon[stm.tm_mon], stm.tm_mday, stm.tm_hour,
+ stm.tm_min, stm.tm_sec, f_len, f,
+ stm.tm_year + 1900) > 0;
+ }
}
- } else {
- if ((flags & ASN1_DTFLGS_TYPE_MASK) == ASN1_DTFLGS_ISO8601) {
- return BIO_printf(bp, "%4d-%02d-%02d %02d:%02d:%02d%s",
+ }
+ if ((flags & ASN1_DTFLGS_TYPE_MASK) == ASN1_DTFLGS_ISO8601) {
+ return BIO_printf(bp, "%4d-%02d-%02d %02d:%02d:%02dZ",
stm.tm_year + 1900, stm.tm_mon + 1,
stm.tm_mday, stm.tm_hour,
- stm.tm_min, stm.tm_sec,
- (gmt ? "Z" : "")) > 0;
- }
- else {
- return BIO_printf(bp, "%s %2d %02d:%02d:%02d %d%s",
+ stm.tm_min, stm.tm_sec) > 0;
+ } else {
+ return BIO_printf(bp, "%s %2d %02d:%02d:%02d %d GMT",
_asn1_mon[stm.tm_mon], stm.tm_mday, stm.tm_hour,
- stm.tm_min, stm.tm_sec, stm.tm_year + 1900,
- (gmt ? " GMT" : "")) > 0;
- }
+ stm.tm_min, stm.tm_sec, stm.tm_year + 1900) > 0;
}
}
diff --git a/crypto/openssl/crypto/asn1/asn1_gen.c b/crypto/openssl/crypto/asn1/asn1_gen.c
--- a/crypto/openssl/crypto/asn1/asn1_gen.c
+++ b/crypto/openssl/crypto/asn1/asn1_gen.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2002-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2002-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -498,7 +498,8 @@
static int asn1_str2tag(const char *tagstr, int len)
{
unsigned int i;
- static const struct tag_name_st *tntmp, tnst[] = {
+ const struct tag_name_st *tntmp;
+ static const struct tag_name_st tnst[] = {
ASN1_GEN_STR("BOOL", V_ASN1_BOOLEAN),
ASN1_GEN_STR("BOOLEAN", V_ASN1_BOOLEAN),
ASN1_GEN_STR("NULL", V_ASN1_NULL),
diff --git a/crypto/openssl/crypto/asn1/asn_mime.c b/crypto/openssl/crypto/asn1/asn_mime.c
--- a/crypto/openssl/crypto/asn1/asn_mime.c
+++ b/crypto/openssl/crypto/asn1/asn_mime.c
@@ -300,6 +300,8 @@
if (ctype_nid == NID_pkcs7_enveloped) {
msg_type = "enveloped-data";
+ } else if (ctype_nid == NID_id_smime_ct_authEnvelopedData) {
+ msg_type = "authEnveloped-data";
} else if (ctype_nid == NID_pkcs7_signed) {
if (econt_nid == NID_id_smime_ct_receipt)
msg_type = "signed-receipt";
diff --git a/crypto/openssl/crypto/bio/bio_addr.c b/crypto/openssl/crypto/bio/bio_addr.c
--- a/crypto/openssl/crypto/bio/bio_addr.c
+++ b/crypto/openssl/crypto/bio/bio_addr.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2016-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2016-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -547,8 +547,13 @@
*service = NULL;
} else {
*service = OPENSSL_strndup(p, pl);
- if (*service == NULL)
+ if (*service == NULL) {
+ if (h != NULL && host != NULL) {
+ OPENSSL_free(*host);
+ *host = NULL;
+ }
goto memerr;
+ }
}
}
diff --git a/crypto/openssl/crypto/bio/bio_sock.c b/crypto/openssl/crypto/bio/bio_sock.c
--- a/crypto/openssl/crypto/bio/bio_sock.c
+++ b/crypto/openssl/crypto/bio/bio_sock.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1995-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -222,7 +222,7 @@
return INVALID_SOCKET;
if (BIO_sock_init() != 1)
- return INVALID_SOCKET;
+ goto err;
if (BIO_lookup(h, p, BIO_LOOKUP_SERVER, AF_UNSPEC, SOCK_STREAM, &res) != 0)
goto err;
diff --git a/crypto/openssl/crypto/bio/bss_log.c b/crypto/openssl/crypto/bio/bss_log.c
--- a/crypto/openssl/crypto/bio/bss_log.c
+++ b/crypto/openssl/crypto/bio/bss_log.c
@@ -281,7 +281,7 @@
break;
}
- sprintf(pidbuf, "[%lu] ", GetCurrentProcessId());
+ BIO_snprintf(pidbuf, sizeof(pidbuf), "[%lu] ", GetCurrentProcessId());
lpszStrings[0] = pidbuf;
lpszStrings[1] = string;
diff --git a/crypto/openssl/crypto/bn/asm/armv8-mont.pl b/crypto/openssl/crypto/bn/asm/armv8-mont.pl
--- a/crypto/openssl/crypto/bn/asm/armv8-mont.pl
+++ b/crypto/openssl/crypto/bn/asm/armv8-mont.pl
@@ -1,5 +1,5 @@
#! /usr/bin/env perl
-# Copyright 2015-2021 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2015-2025 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
@@ -85,10 +85,12 @@
cmp $num,#32
b.le .Lscalar_impl
#ifndef __KERNEL__
+#ifndef __AARCH64EB__
adrp x17,OPENSSL_armv8_rsa_neonized
ldr w17,[x17,#:lo12:OPENSSL_armv8_rsa_neonized]
cbnz w17, bn_mul8x_mont_neon
#endif
+#endif
.Lscalar_impl:
tst $num,#7
diff --git a/crypto/openssl/crypto/bn/bn_exp.c b/crypto/openssl/crypto/bn/bn_exp.c
--- a/crypto/openssl/crypto/bn/bn_exp.c
+++ b/crypto/openssl/crypto/bn/bn_exp.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1995-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -606,7 +606,7 @@
* out by Colin Percival,
* http://www.daemonology.net/hyperthreading-considered-harmful/)
*/
-int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
+int bn_mod_exp_mont_fixed_top(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
const BIGNUM *m, BN_CTX *ctx,
BN_MONT_CTX *in_mont)
{
@@ -623,10 +623,6 @@
unsigned int t4 = 0;
#endif
- bn_check_top(a);
- bn_check_top(p);
- bn_check_top(m);
-
if (!BN_is_odd(m)) {
ERR_raise(ERR_LIB_BN, BN_R_CALLED_WITH_EVEN_MODULUS);
return 0;
@@ -1146,7 +1142,7 @@
goto err;
} else
#endif
- if (!BN_from_montgomery(rr, &tmp, mont, ctx))
+ if (!bn_from_mont_fixed_top(rr, &tmp, mont, ctx))
goto err;
ret = 1;
err:
@@ -1160,6 +1156,19 @@
return ret;
}
+int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *m, BN_CTX *ctx,
+ BN_MONT_CTX *in_mont)
+{
+ bn_check_top(a);
+ bn_check_top(p);
+ bn_check_top(m);
+ if (!bn_mod_exp_mont_fixed_top(rr, a, p, m, ctx, in_mont))
+ return 0;
+ bn_correct_top(rr);
+ return 1;
+}
+
int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p,
const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
{
diff --git a/crypto/openssl/crypto/bn/bn_gf2m.c b/crypto/openssl/crypto/bn/bn_gf2m.c
--- a/crypto/openssl/crypto/bn/bn_gf2m.c
+++ b/crypto/openssl/crypto/bn/bn_gf2m.c
@@ -15,6 +15,7 @@
#include "bn_local.h"
#ifndef OPENSSL_NO_EC2M
+# include <openssl/ec.h>
/*
* Maximum number of iterations before BN_GF2m_mod_solve_quad_arr should
@@ -1140,16 +1141,26 @@
/*
* Convert the bit-string representation of a polynomial ( \sum_{i=0}^n a_i *
* x^i) into an array of integers corresponding to the bits with non-zero
- * coefficient. Array is terminated with -1. Up to max elements of the array
- * will be filled. Return value is total number of array elements that would
- * be filled if array was large enough.
+ * coefficient. The array is intended to be suitable for use with
+ * `BN_GF2m_mod_arr()`, and so the constant term of the polynomial must not be
+ * zero. This translates to a requirement that the input BIGNUM `a` is odd.
+ *
+ * Given sufficient room, the array is terminated with -1. Up to max elements
+ * of the array will be filled.
+ *
+ * The return value is total number of array elements that would be filled if
+ * array was large enough, including the terminating `-1`. It is `0` when `a`
+ * is not odd or the constant term is zero contrary to requirement.
+ *
+ * The return value is also `0` when the leading exponent exceeds
+ * `OPENSSL_ECC_MAX_FIELD_BITS`, this guards against CPU exhaustion attacks,
*/
int BN_GF2m_poly2arr(const BIGNUM *a, int p[], int max)
{
int i, j, k = 0;
BN_ULONG mask;
- if (BN_is_zero(a))
+ if (!BN_is_odd(a))
return 0;
for (i = a->top - 1; i >= 0; i--) {
@@ -1167,12 +1178,13 @@
}
}
- if (k < max) {
+ if (k > 0 && p[0] > OPENSSL_ECC_MAX_FIELD_BITS)
+ return 0;
+
+ if (k < max)
p[k] = -1;
- k++;
- }
- return k;
+ return k + 1;
}
/*
diff --git a/crypto/openssl/crypto/bn/rsaz_exp_x2.c b/crypto/openssl/crypto/bn/rsaz_exp_x2.c
--- a/crypto/openssl/crypto/bn/rsaz_exp_x2.c
+++ b/crypto/openssl/crypto/bn/rsaz_exp_x2.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2020-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2020-2025 The OpenSSL Project Authors. All Rights Reserved.
* Copyright (c) 2020, Intel Corporation. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
@@ -495,11 +495,7 @@
out_len--;
}
- while (out_len > 0) {
- *out = 0;
- out_len--;
- out++;
- }
+ memset(out, 0, out_len * sizeof(BN_ULONG));
}
static ossl_inline void put_digit52(uint8_t *pStr, int strLen, uint64_t digit)
diff --git a/crypto/openssl/crypto/cmp/cmp_client.c b/crypto/openssl/crypto/cmp/cmp_client.c
--- a/crypto/openssl/crypto/cmp/cmp_client.c
+++ b/crypto/openssl/crypto/cmp/cmp_client.c
@@ -107,9 +107,12 @@
ss = si->statusString; /* may be NULL */
for (i = 0; i < sk_ASN1_UTF8STRING_num(ss); i++) {
ASN1_UTF8STRING *str = sk_ASN1_UTF8STRING_value(ss, i);
+ ASN1_UTF8STRING *dup = ASN1_STRING_dup(str);
- if (!sk_ASN1_UTF8STRING_push(ctx->statusString, ASN1_STRING_dup(str)))
+ if (dup == NULL || !sk_ASN1_UTF8STRING_push(ctx->statusString, dup)) {
+ ASN1_UTF8STRING_free(dup);
return 0;
+ }
}
return 1;
}
diff --git a/crypto/openssl/crypto/cms/cms_asn1.c b/crypto/openssl/crypto/cms/cms_asn1.c
--- a/crypto/openssl/crypto/cms/cms_asn1.c
+++ b/crypto/openssl/crypto/cms/cms_asn1.c
@@ -51,6 +51,7 @@
EVP_PKEY_free(si->pkey);
X509_free(si->signer);
EVP_MD_CTX_free(si->mctx);
+ EVP_PKEY_CTX_free(si->pctx);
}
return 1;
}
@@ -89,11 +90,21 @@
ASN1_IMP_SET_OF_OPT(CMS_OriginatorInfo, crls, CMS_RevocationInfoChoice, 1)
} static_ASN1_SEQUENCE_END(CMS_OriginatorInfo)
-ASN1_NDEF_SEQUENCE(CMS_EncryptedContentInfo) = {
+static int cms_ec_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it,
+ void *exarg)
+{
+ CMS_EncryptedContentInfo *ec = (CMS_EncryptedContentInfo *)*pval;
+
+ if (operation == ASN1_OP_FREE_POST)
+ OPENSSL_clear_free(ec->key, ec->keylen);
+ return 1;
+}
+
+ASN1_NDEF_SEQUENCE_cb(CMS_EncryptedContentInfo, cms_ec_cb) = {
ASN1_SIMPLE(CMS_EncryptedContentInfo, contentType, ASN1_OBJECT),
ASN1_SIMPLE(CMS_EncryptedContentInfo, contentEncryptionAlgorithm, X509_ALGOR),
ASN1_IMP_OPT(CMS_EncryptedContentInfo, encryptedContent, ASN1_OCTET_STRING_NDEF, 0)
-} static_ASN1_NDEF_SEQUENCE_END(CMS_EncryptedContentInfo)
+} ASN1_NDEF_SEQUENCE_END_cb(CMS_EncryptedContentInfo, CMS_EncryptedContentInfo)
ASN1_SEQUENCE(CMS_KeyTransRecipientInfo) = {
ASN1_EMBED(CMS_KeyTransRecipientInfo, version, INT32),
@@ -317,6 +328,10 @@
return 0;
break;
+ case ASN1_OP_FREE_POST:
+ OPENSSL_free(cms->ctx.propq);
+ break;
+
}
return 1;
}
diff --git a/crypto/openssl/crypto/cms/cms_dh.c b/crypto/openssl/crypto/cms/cms_dh.c
--- a/crypto/openssl/crypto/cms/cms_dh.c
+++ b/crypto/openssl/crypto/cms/cms_dh.c
@@ -34,7 +34,7 @@
if (OBJ_obj2nid(aoid) != NID_dhpublicnumber)
goto err;
/* Only absent parameters allowed in RFC XXXX */
- if (atype != V_ASN1_UNDEF && atype == V_ASN1_NULL)
+ if (atype != V_ASN1_UNDEF && atype != V_ASN1_NULL)
goto err;
pk = EVP_PKEY_CTX_get0_pkey(pctx);
diff --git a/crypto/openssl/crypto/cms/cms_env.c b/crypto/openssl/crypto/cms/cms_env.c
--- a/crypto/openssl/crypto/cms/cms_env.c
+++ b/crypto/openssl/crypto/cms/cms_env.c
@@ -51,15 +51,6 @@
return ret;
}
-void ossl_cms_env_enc_content_free(const CMS_ContentInfo *cinf)
-{
- if (cms_get_enveloped_type_simple(cinf) != 0) {
- CMS_EncryptedContentInfo *ec = ossl_cms_get0_env_enc_content(cinf);
- if (ec != NULL)
- OPENSSL_clear_free(ec->key, ec->keylen);
- }
-}
-
CMS_EnvelopedData *ossl_cms_get0_enveloped(CMS_ContentInfo *cms)
{
if (OBJ_obj2nid(cms->contentType) != NID_pkcs7_enveloped) {
diff --git a/crypto/openssl/crypto/cms/cms_err.c b/crypto/openssl/crypto/cms/cms_err.c
--- a/crypto/openssl/crypto/cms/cms_err.c
+++ b/crypto/openssl/crypto/cms/cms_err.c
@@ -1,6 +1,6 @@
/*
* Generated by util/mkerr.pl DO NOT EDIT
- * Copyright 1995-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -20,77 +20,79 @@
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_ADD_SIGNER_ERROR), "add signer error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_ATTRIBUTE_ERROR), "attribute error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CERTIFICATE_ALREADY_PRESENT),
- "certificate already present"},
+ "certificate already present"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CERTIFICATE_HAS_NO_KEYID),
- "certificate has no keyid"},
+ "certificate has no keyid"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CERTIFICATE_VERIFY_ERROR),
- "certificate verify error"},
+ "certificate verify error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CIPHER_AEAD_SET_TAG_ERROR),
- "cipher aead set tag error"},
+ "cipher aead set tag error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CIPHER_GET_TAG), "cipher get tag"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CIPHER_INITIALISATION_ERROR),
- "cipher initialisation error"},
+ "cipher initialisation error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CIPHER_PARAMETER_INITIALISATION_ERROR),
- "cipher parameter initialisation error"},
+ "cipher parameter initialisation error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CMS_DATAFINAL_ERROR),
- "cms datafinal error"},
+ "cms datafinal error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CMS_LIB), "cms lib"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CONTENTIDENTIFIER_MISMATCH),
- "contentidentifier mismatch"},
+ "contentidentifier mismatch"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CONTENT_NOT_FOUND), "content not found"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CONTENT_TYPE_MISMATCH),
- "content type mismatch"},
+ "content type mismatch"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CONTENT_TYPE_NOT_COMPRESSED_DATA),
- "content type not compressed data"},
+ "content type not compressed data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CONTENT_TYPE_NOT_ENVELOPED_DATA),
- "content type not enveloped data"},
+ "content type not enveloped data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CONTENT_TYPE_NOT_SIGNED_DATA),
- "content type not signed data"},
+ "content type not signed data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CONTENT_VERIFY_ERROR),
- "content verify error"},
+ "content verify error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CTRL_ERROR), "ctrl error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_CTRL_FAILURE), "ctrl failure"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_DECODE_ERROR), "decode error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_DECRYPT_ERROR), "decrypt error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_ERROR_GETTING_PUBLIC_KEY),
- "error getting public key"},
+ "error getting public key"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_ERROR_READING_MESSAGEDIGEST_ATTRIBUTE),
- "error reading messagedigest attribute"},
+ "error reading messagedigest attribute"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_ERROR_SETTING_KEY), "error setting key"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_ERROR_SETTING_RECIPIENTINFO),
- "error setting recipientinfo"},
+ "error setting recipientinfo"},
+ {ERR_PACK(ERR_LIB_CMS, 0, CMS_R_ERROR_UNSUPPORTED_STATIC_KEY_AGREEMENT),
+ "error unsupported static key agreement"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_ESS_SIGNING_CERTID_MISMATCH_ERROR),
- "ess signing certid mismatch error"},
+ "ess signing certid mismatch error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_INVALID_ENCRYPTED_KEY_LENGTH),
- "invalid encrypted key length"},
+ "invalid encrypted key length"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_INVALID_KEY_ENCRYPTION_PARAMETER),
- "invalid key encryption parameter"},
+ "invalid key encryption parameter"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_INVALID_KEY_LENGTH), "invalid key length"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_INVALID_LABEL), "invalid label"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_INVALID_OAEP_PARAMETERS),
- "invalid oaep parameters"},
+ "invalid oaep parameters"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_KDF_PARAMETER_ERROR),
- "kdf parameter error"},
+ "kdf parameter error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_MD_BIO_INIT_ERROR), "md bio init error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_MESSAGEDIGEST_ATTRIBUTE_WRONG_LENGTH),
- "messagedigest attribute wrong length"},
+ "messagedigest attribute wrong length"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_MESSAGEDIGEST_WRONG_LENGTH),
- "messagedigest wrong length"},
+ "messagedigest wrong length"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_MSGSIGDIGEST_ERROR), "msgsigdigest error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_MSGSIGDIGEST_VERIFICATION_FAILURE),
- "msgsigdigest verification failure"},
+ "msgsigdigest verification failure"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_MSGSIGDIGEST_WRONG_LENGTH),
- "msgsigdigest wrong length"},
+ "msgsigdigest wrong length"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NEED_ONE_SIGNER), "need one signer"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NOT_A_SIGNED_RECEIPT),
- "not a signed receipt"},
+ "not a signed receipt"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NOT_ENCRYPTED_DATA), "not encrypted data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NOT_KEK), "not kek"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NOT_KEY_AGREEMENT), "not key agreement"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NOT_KEY_TRANSPORT), "not key transport"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NOT_PWRI), "not pwri"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NOT_SUPPORTED_FOR_THIS_KEY_TYPE),
- "not supported for this key type"},
+ "not supported for this key type"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_CIPHER), "no cipher"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_CONTENT), "no content"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_CONTENT_TYPE), "no content type"},
@@ -100,9 +102,9 @@
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_KEY_OR_CERT), "no key or cert"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_MATCHING_DIGEST), "no matching digest"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_MATCHING_RECIPIENT),
- "no matching recipient"},
+ "no matching recipient"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_MATCHING_SIGNATURE),
- "no matching signature"},
+ "no matching signature"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_MSGSIGDIGEST), "no msgsigdigest"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_PASSWORD), "no password"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_PRIVATE_KEY), "no private key"},
@@ -111,56 +113,56 @@
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_NO_SIGNERS), "no signers"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_PEER_KEY_ERROR), "peer key error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE),
- "private key does not match certificate"},
+ "private key does not match certificate"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_RECEIPT_DECODE_ERROR),
- "receipt decode error"},
+ "receipt decode error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_RECIPIENT_ERROR), "recipient error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_SHARED_INFO_ERROR), "shared info error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_SIGNER_CERTIFICATE_NOT_FOUND),
- "signer certificate not found"},
+ "signer certificate not found"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_SIGNFINAL_ERROR), "signfinal error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_SMIME_TEXT_ERROR), "smime text error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_STORE_INIT_ERROR), "store init error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_TYPE_NOT_COMPRESSED_DATA),
- "type not compressed data"},
+ "type not compressed data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_TYPE_NOT_DATA), "type not data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_TYPE_NOT_DIGESTED_DATA),
- "type not digested data"},
+ "type not digested data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_TYPE_NOT_ENCRYPTED_DATA),
- "type not encrypted data"},
+ "type not encrypted data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_TYPE_NOT_ENVELOPED_DATA),
- "type not enveloped data"},
+ "type not enveloped data"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNABLE_TO_FINALIZE_CONTEXT),
- "unable to finalize context"},
+ "unable to finalize context"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNKNOWN_CIPHER), "unknown cipher"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNKNOWN_DIGEST_ALGORITHM),
- "unknown digest algorithm"},
+ "unknown digest algorithm"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNKNOWN_ID), "unknown id"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_COMPRESSION_ALGORITHM),
- "unsupported compression algorithm"},
+ "unsupported compression algorithm"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_CONTENT_ENCRYPTION_ALGORITHM),
- "unsupported content encryption algorithm"},
+ "unsupported content encryption algorithm"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_CONTENT_TYPE),
- "unsupported content type"},
+ "unsupported content type"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_ENCRYPTION_TYPE),
- "unsupported encryption type"},
+ "unsupported encryption type"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_KEK_ALGORITHM),
- "unsupported kek algorithm"},
+ "unsupported kek algorithm"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_KEY_ENCRYPTION_ALGORITHM),
- "unsupported key encryption algorithm"},
+ "unsupported key encryption algorithm"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_LABEL_SOURCE),
- "unsupported label source"},
+ "unsupported label source"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_RECIPIENTINFO_TYPE),
- "unsupported recipientinfo type"},
+ "unsupported recipientinfo type"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_RECIPIENT_TYPE),
- "unsupported recipient type"},
+ "unsupported recipient type"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_SIGNATURE_ALGORITHM),
- "unsupported signature algorithm"},
+ "unsupported signature algorithm"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNSUPPORTED_TYPE), "unsupported type"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNWRAP_ERROR), "unwrap error"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_UNWRAP_FAILURE), "unwrap failure"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_VERIFICATION_FAILURE),
- "verification failure"},
+ "verification failure"},
{ERR_PACK(ERR_LIB_CMS, 0, CMS_R_WRAP_ERROR), "wrap error"},
{0, NULL}
};
diff --git a/crypto/openssl/crypto/cms/cms_kari.c b/crypto/openssl/crypto/cms/cms_kari.c
--- a/crypto/openssl/crypto/cms/cms_kari.c
+++ b/crypto/openssl/crypto/cms/cms_kari.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2013-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2013-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -502,6 +502,13 @@
oik->d.originatorKey = M_ASN1_new_of(CMS_OriginatorPublicKey);
if (!oik->d.originatorKey)
return 0;
+ } else {
+ /*
+ * Currently it is not possible to get public key as it is not stored
+ * during kari initialization.
+ */
+ ERR_raise(ERR_LIB_CMS, CMS_R_ERROR_UNSUPPORTED_STATIC_KEY_AGREEMENT);
+ return 0;
}
/* Initialise KDF algorithm */
if (!ossl_cms_env_asn1_ctrl(ri, 0))
diff --git a/crypto/openssl/crypto/cms/cms_lib.c b/crypto/openssl/crypto/cms/cms_lib.c
--- a/crypto/openssl/crypto/cms/cms_lib.c
+++ b/crypto/openssl/crypto/cms/cms_lib.c
@@ -22,6 +22,7 @@
static STACK_OF(CMS_CertificateChoices)
**cms_get0_certificate_choices(CMS_ContentInfo *cms);
+IMPLEMENT_ASN1_ALLOC_FUNCTIONS(CMS_ContentInfo)
IMPLEMENT_ASN1_PRINT_FUNCTION(CMS_ContentInfo)
CMS_ContentInfo *d2i_CMS_ContentInfo(CMS_ContentInfo **a,
@@ -68,20 +69,6 @@
return ci;
}
-CMS_ContentInfo *CMS_ContentInfo_new(void)
-{
- return CMS_ContentInfo_new_ex(NULL, NULL);
-}
-
-void CMS_ContentInfo_free(CMS_ContentInfo *cms)
-{
- if (cms != NULL) {
- ossl_cms_env_enc_content_free(cms);
- OPENSSL_free(cms->ctx.propq);
- ASN1_item_free((ASN1_VALUE *)cms, ASN1_ITEM_rptr(CMS_ContentInfo));
- }
-}
-
const CMS_CTX *ossl_cms_get0_cmsctx(const CMS_ContentInfo *cms)
{
return cms != NULL ? &cms->ctx : NULL;
diff --git a/crypto/openssl/crypto/cms/cms_local.h b/crypto/openssl/crypto/cms/cms_local.h
--- a/crypto/openssl/crypto/cms/cms_local.h
+++ b/crypto/openssl/crypto/cms/cms_local.h
@@ -368,6 +368,7 @@
DECLARE_ASN1_FUNCTIONS(CMS_ContentInfo)
DECLARE_ASN1_ITEM(CMS_SignerInfo)
+DECLARE_ASN1_ITEM(CMS_EncryptedContentInfo)
DECLARE_ASN1_ITEM(CMS_IssuerAndSerialNumber)
DECLARE_ASN1_ITEM(CMS_Attributes_Sign)
DECLARE_ASN1_ITEM(CMS_Attributes_Verify)
@@ -444,7 +445,6 @@
int ossl_cms_EnvelopedData_final(CMS_ContentInfo *cms, BIO *chain);
BIO *ossl_cms_AuthEnvelopedData_init_bio(CMS_ContentInfo *cms);
int ossl_cms_AuthEnvelopedData_final(CMS_ContentInfo *cms, BIO *cmsbio);
-void ossl_cms_env_enc_content_free(const CMS_ContentInfo *cinf);
CMS_EnvelopedData *ossl_cms_get0_enveloped(CMS_ContentInfo *cms);
CMS_AuthEnvelopedData *ossl_cms_get0_auth_enveloped(CMS_ContentInfo *cms);
CMS_EncryptedContentInfo *ossl_cms_get0_env_enc_content(const CMS_ContentInfo *cms);
diff --git a/crypto/openssl/crypto/cms/cms_rsa.c b/crypto/openssl/crypto/cms/cms_rsa.c
--- a/crypto/openssl/crypto/cms/cms_rsa.c
+++ b/crypto/openssl/crypto/cms/cms_rsa.c
@@ -223,7 +223,10 @@
os = ossl_rsa_ctx_to_pss_string(pkctx);
if (os == NULL)
return 0;
- return X509_ALGOR_set0(alg, OBJ_nid2obj(EVP_PKEY_RSA_PSS), V_ASN1_SEQUENCE, os);
+ if (X509_ALGOR_set0(alg, OBJ_nid2obj(EVP_PKEY_RSA_PSS), V_ASN1_SEQUENCE, os))
+ return 1;
+ ASN1_STRING_free(os);
+ return 0;
}
params[0] = OSSL_PARAM_construct_octet_string(
diff --git a/crypto/openssl/crypto/cms/cms_sd.c b/crypto/openssl/crypto/cms/cms_sd.c
--- a/crypto/openssl/crypto/cms/cms_sd.c
+++ b/crypto/openssl/crypto/cms/cms_sd.c
@@ -482,8 +482,12 @@
ossl_cms_ctx_get0_libctx(ctx),
ossl_cms_ctx_get0_propq(ctx),
pk, NULL) <= 0) {
+ si->pctx = NULL;
goto err;
}
+ else {
+ EVP_MD_CTX_set_flags(si->mctx, EVP_MD_CTX_FLAG_KEEP_PKEY_CTX);
+ }
}
if (!sd->signerInfos)
@@ -725,6 +729,7 @@
unsigned int mdlen;
pctx = si->pctx;
+ si->pctx = NULL;
if (!EVP_DigestFinal_ex(mctx, md, &mdlen))
goto err;
siglen = EVP_PKEY_get_size(si->pkey);
@@ -813,6 +818,7 @@
ossl_cms_ctx_get0_propq(ctx), si->pkey,
NULL) <= 0)
goto err;
+ EVP_MD_CTX_set_flags(mctx, EVP_MD_CTX_FLAG_KEEP_PKEY_CTX);
si->pctx = pctx;
}
@@ -884,9 +890,16 @@
goto err;
}
mctx = si->mctx;
+ if (si->pctx != NULL) {
+ EVP_PKEY_CTX_free(si->pctx);
+ si->pctx = NULL;
+ }
if (EVP_DigestVerifyInit_ex(mctx, &si->pctx, EVP_MD_get0_name(md), libctx,
- propq, si->pkey, NULL) <= 0)
+ propq, si->pkey, NULL) <= 0) {
+ si->pctx = NULL;
goto err;
+ }
+ EVP_MD_CTX_set_flags(mctx, EVP_MD_CTX_FLAG_KEEP_PKEY_CTX);
if (!cms_sd_asn1_ctrl(si, 1))
goto err;
@@ -1003,8 +1016,11 @@
if (EVP_PKEY_CTX_set_signature_md(pkctx, md) <= 0)
goto err;
si->pctx = pkctx;
- if (!cms_sd_asn1_ctrl(si, 1))
+ if (!cms_sd_asn1_ctrl(si, 1)) {
+ si->pctx = NULL;
goto err;
+ }
+ si->pctx = NULL;
r = EVP_PKEY_verify(pkctx, si->signature->data,
si->signature->length, mval, mlen);
if (r <= 0) {
diff --git a/crypto/openssl/crypto/cms/cms_smime.c b/crypto/openssl/crypto/cms/cms_smime.c
--- a/crypto/openssl/crypto/cms/cms_smime.c
+++ b/crypto/openssl/crypto/cms/cms_smime.c
@@ -236,7 +236,7 @@
if (cms == NULL)
return NULL;
if (!CMS_EncryptedData_set1_key(cms, cipher, key, keylen))
- return NULL;
+ goto err;
if (!(flags & CMS_DETACHED))
CMS_set_detached(cms, 0);
@@ -245,6 +245,7 @@
|| CMS_final(cms, in, NULL, flags))
return cms;
+ err:
CMS_ContentInfo_free(cms);
return NULL;
}
diff --git a/crypto/openssl/crypto/core_fetch.c b/crypto/openssl/crypto/core_fetch.c
--- a/crypto/openssl/crypto/core_fetch.c
+++ b/crypto/openssl/crypto/core_fetch.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2019-2022 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2019-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -120,7 +120,8 @@
* It is *expected* that the put function increments the refcnt
* of the passed method.
*/
- data->mcm->put(data->store, method, provider, algo->algorithm_names,
+ data->mcm->put(no_store ? data->store : NULL,
+ method, provider, algo->algorithm_names,
algo->property_definition, data->mcm_data);
/* refcnt-- because we're dropping the reference */
diff --git a/crypto/openssl/crypto/dso/dso_dl.c b/crypto/openssl/crypto/dso/dso_dl.c
--- a/crypto/openssl/crypto/dso/dso_dl.c
+++ b/crypto/openssl/crypto/dso/dso_dl.c
@@ -235,13 +235,12 @@
ERR_raise(ERR_LIB_DSO, DSO_R_NAME_TRANSLATION_FAILED);
return NULL;
}
- if (transform) {
- if ((DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0)
- sprintf(translated, "lib%s%s", filename, DSO_EXTENSION);
- else
- sprintf(translated, "%s%s", filename, DSO_EXTENSION);
- } else
- sprintf(translated, "%s", filename);
+ if (transform)
+ BIO_snprintf(translated, rsize,
+ (DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0
+ ? "lib%s%s" : "%s%s", filename, DSO_EXTENSION);
+ else
+ BIO_snprintf(translated, rsize, "%s", filename);
return translated;
}
diff --git a/crypto/openssl/crypto/dso/dso_dlfcn.c b/crypto/openssl/crypto/dso/dso_dlfcn.c
--- a/crypto/openssl/crypto/dso/dso_dlfcn.c
+++ b/crypto/openssl/crypto/dso/dso_dlfcn.c
@@ -271,11 +271,12 @@
}
if (transform) {
if ((DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0)
- sprintf(translated, "lib%s" DSO_EXTENSION, filename);
+ BIO_snprintf(translated, rsize, "lib%s" DSO_EXTENSION, filename);
else
- sprintf(translated, "%s" DSO_EXTENSION, filename);
- } else
- sprintf(translated, "%s", filename);
+ BIO_snprintf(translated, rsize, "%s" DSO_EXTENSION, filename);
+ } else {
+ BIO_snprintf(translated, rsize, "%s", filename);
+ }
return translated;
}
diff --git a/crypto/openssl/crypto/dso/dso_win32.c b/crypto/openssl/crypto/dso/dso_win32.c
--- a/crypto/openssl/crypto/dso/dso_win32.c
+++ b/crypto/openssl/crypto/dso/dso_win32.c
@@ -454,24 +454,20 @@
char *translated;
int len, transform;
- len = strlen(filename);
transform = ((strstr(filename, "/") == NULL) &&
(strstr(filename, "\\") == NULL) &&
(strstr(filename, ":") == NULL));
+ /* If transform != 0, then we convert to %s.dll, else just dupe filename */
+
+ len = strlen(filename) + 1;
if (transform)
- /* We will convert this to "%s.dll" */
- translated = OPENSSL_malloc(len + 5);
- else
- /* We will simply duplicate filename */
- translated = OPENSSL_malloc(len + 1);
+ len += strlen(".dll");
+ translated = OPENSSL_malloc(len);
if (translated == NULL) {
ERR_raise(ERR_LIB_DSO, DSO_R_NAME_TRANSLATION_FAILED);
return NULL;
}
- if (transform)
- sprintf(translated, "%s.dll", filename);
- else
- sprintf(translated, "%s", filename);
+ BIO_snprintf(translated, len, "%s%s", filename, transform ? ".dll" : "");
return translated;
}
diff --git a/crypto/openssl/crypto/ec/ec_asn1.c b/crypto/openssl/crypto/ec/ec_asn1.c
--- a/crypto/openssl/crypto/ec/ec_asn1.c
+++ b/crypto/openssl/crypto/ec/ec_asn1.c
@@ -1161,7 +1161,7 @@
size_t buf_len = 0;
int new_buffer = 0;
- if (a == NULL) {
+ if (a == NULL || a->pub_key == NULL) {
ERR_raise(ERR_LIB_EC, ERR_R_PASSED_NULL_PARAMETER);
return 0;
}
diff --git a/crypto/openssl/crypto/ec/ec_backend.c b/crypto/openssl/crypto/ec/ec_backend.c
--- a/crypto/openssl/crypto/ec/ec_backend.c
+++ b/crypto/openssl/crypto/ec/ec_backend.c
@@ -616,14 +616,8 @@
|| !EC_GROUP_copy(ret->group, src->group))
goto err;
- if (src->meth != NULL) {
-#if !defined(OPENSSL_NO_ENGINE) && !defined(FIPS_MODULE)
- if (src->engine != NULL && ENGINE_init(src->engine) == 0)
- goto err;
- ret->engine = src->engine;
-#endif
+ if (src->meth != NULL)
ret->meth = src->meth;
- }
}
/* copy the public key */
diff --git a/crypto/openssl/crypto/ec/ec_lib.c b/crypto/openssl/crypto/ec/ec_lib.c
--- a/crypto/openssl/crypto/ec/ec_lib.c
+++ b/crypto/openssl/crypto/ec/ec_lib.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2001-2022 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2001-2025 The OpenSSL Project Authors. All Rights Reserved.
* Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
@@ -20,6 +20,7 @@
#include <openssl/err.h>
#include <openssl/opensslv.h>
#include "crypto/ec.h"
+#include "crypto/bn.h"
#include "internal/nelem.h"
#include "ec_local.h"
@@ -1262,10 +1263,10 @@
if (!BN_sub(e, group->order, e))
goto err;
/*-
- * Exponent e is public.
- * No need for scatter-gather or BN_FLG_CONSTTIME.
+ * Although the exponent is public we want the result to be
+ * fixed top.
*/
- if (!BN_mod_exp_mont(r, x, e, group->order, ctx, group->mont_data))
+ if (!bn_mod_exp_mont_fixed_top(r, x, e, group->order, ctx, group->mont_data))
goto err;
ret = 1;
diff --git a/crypto/openssl/crypto/ec/ec_oct.c b/crypto/openssl/crypto/ec/ec_oct.c
--- a/crypto/openssl/crypto/ec/ec_oct.c
+++ b/crypto/openssl/crypto/ec/ec_oct.c
@@ -74,6 +74,10 @@
point_conversion_form_t form, unsigned char *buf,
size_t len, BN_CTX *ctx)
{
+ if (point == NULL) {
+ ERR_raise(ERR_LIB_EC, ERR_R_PASSED_NULL_PARAMETER);
+ return 0;
+ }
if (group->meth->point2oct == 0
&& !(group->meth->flags & EC_FLAGS_DEFAULT_OCT)) {
ERR_raise(ERR_LIB_EC, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
diff --git a/crypto/openssl/crypto/encode_decode/encoder_pkey.c b/crypto/openssl/crypto/encode_decode/encoder_pkey.c
--- a/crypto/openssl/crypto/encode_decode/encoder_pkey.c
+++ b/crypto/openssl/crypto/encode_decode/encoder_pkey.c
@@ -186,9 +186,13 @@
const OSSL_PROVIDER *e_prov = OSSL_ENCODER_get0_provider(encoder);
if (k_prov != e_prov) {
+ int selection = data->selection;
+
+ if ((selection & OSSL_KEYMGMT_SELECT_PRIVATE_KEY) != 0)
+ selection |= OSSL_KEYMGMT_SELECT_PUBLIC_KEY;
data->encoder_inst = encoder_inst;
- if (!evp_keymgmt_export(pk->keymgmt, pk->keydata, data->selection,
+ if (!evp_keymgmt_export(pk->keymgmt, pk->keydata, selection,
&encoder_import_cb, data))
return NULL;
data->obj = data->constructed_obj;
diff --git a/crypto/openssl/crypto/err/openssl.txt b/crypto/openssl/crypto/err/openssl.txt
--- a/crypto/openssl/crypto/err/openssl.txt
+++ b/crypto/openssl/crypto/err/openssl.txt
@@ -1,4 +1,4 @@
-# Copyright 1999-2023 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 1999-2025 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
@@ -307,6 +307,8 @@
error reading messagedigest attribute
CMS_R_ERROR_SETTING_KEY:115:error setting key
CMS_R_ERROR_SETTING_RECIPIENTINFO:116:error setting recipientinfo
+CMS_R_ERROR_UNSUPPORTED_STATIC_KEY_AGREEMENT:196:\
+ error unsupported static key agreement
CMS_R_ESS_SIGNING_CERTID_MISMATCH_ERROR:183:ess signing certid mismatch error
CMS_R_INVALID_ENCRYPTED_KEY_LENGTH:117:invalid encrypted key length
CMS_R_INVALID_KEY_ENCRYPTION_PARAMETER:176:invalid key encryption parameter
diff --git a/crypto/openssl/crypto/evp/ctrl_params_translate.c b/crypto/openssl/crypto/evp/ctrl_params_translate.c
--- a/crypto/openssl/crypto/evp/ctrl_params_translate.c
+++ b/crypto/openssl/crypto/evp/ctrl_params_translate.c
@@ -1210,6 +1210,8 @@
/* The initial value for |ctx->action_type| must not be zero. */
if (!ossl_assert(ctx->action_type != NONE))
return 0;
+ } else if (state == POST_PARAMS_TO_CTRL && ctx->action_type == NONE) {
+ ctx->action_type = GET;
}
if ((ret = default_check(state, translation, ctx)) <= 0)
@@ -1235,6 +1237,8 @@
}
} else if (state == PRE_PARAMS_TO_CTRL && ctx->action_type == GET) {
ctx->p1 = -2;
+ } else if (state == POST_PARAMS_TO_CTRL && ctx->action_type == GET) {
+ ctx->p1 = ret;
}
return ret;
@@ -2800,8 +2804,14 @@
/*
* In POST, we pass the return value as p1, allowing the fixup_args
* function to put it to good use, or maybe affect it.
+ *
+ * NOTE: even though EVP_PKEY_CTX_ctrl return value is documented
+ * as return positive on Success and 0 or negative on falure. There
+ * maybe parameters (e.g. ecdh_cofactor), which actually return 0
+ * as success value. That is why we do POST_PARAMS_TO_CTRL for 0
+ * value as well
*/
- if (ret > 0) {
+ if (ret >= 0) {
ctx.p1 = ret;
fixup(POST_PARAMS_TO_CTRL, translation, &ctx);
ret = ctx.p1;
diff --git a/crypto/openssl/crypto/evp/m_sigver.c b/crypto/openssl/crypto/evp/m_sigver.c
--- a/crypto/openssl/crypto/evp/m_sigver.c
+++ b/crypto/openssl/crypto/evp/m_sigver.c
@@ -662,8 +662,12 @@
{
EVP_PKEY_CTX *pctx = ctx->pctx;
- if (pctx != NULL
- && pctx->operation == EVP_PKEY_OP_VERIFYCTX
+ if (pctx == NULL) {
+ ERR_raise(ERR_LIB_EVP, EVP_R_INITIALIZATION_ERROR);
+ return -1;
+ }
+
+ if (pctx->operation == EVP_PKEY_OP_VERIFYCTX
&& pctx->op.sig.algctx != NULL
&& pctx->op.sig.signature != NULL) {
if (pctx->op.sig.signature->digest_verify != NULL)
@@ -672,8 +676,8 @@
tbs, tbslen);
} else {
/* legacy */
- if (ctx->pctx->pmeth != NULL && ctx->pctx->pmeth->digestverify != NULL)
- return ctx->pctx->pmeth->digestverify(ctx, sigret, siglen, tbs, tbslen);
+ if (pctx->pmeth != NULL && pctx->pmeth->digestverify != NULL)
+ return pctx->pmeth->digestverify(ctx, sigret, siglen, tbs, tbslen);
}
if (EVP_DigestVerifyUpdate(ctx, tbs, tbslen) <= 0)
diff --git a/crypto/openssl/crypto/http/http_client.c b/crypto/openssl/crypto/http/http_client.c
--- a/crypto/openssl/crypto/http/http_client.c
+++ b/crypto/openssl/crypto/http/http_client.c
@@ -851,6 +851,20 @@
#ifndef OPENSSL_NO_SOCK
+static const char *explict_or_default_port(const char *hostserv, const char *port, int use_ssl)
+{
+ if (port == NULL) {
+ char *service = NULL;
+
+ if (!BIO_parse_hostserv(hostserv, NULL, &service, BIO_PARSE_PRIO_HOST))
+ return NULL;
+ if (service == NULL) /* implicit port */
+ port = use_ssl ? OSSL_HTTPS_PORT : OSSL_HTTP_PORT;
+ OPENSSL_free(service);
+ } /* otherwise take the explicitly given port */
+ return port;
+}
+
/* set up a new connection BIO, to HTTP server or to HTTP(S) proxy if given */
static BIO *http_new_bio(const char *server /* optionally includes ":port" */,
const char *server_port /* explicit server port */,
@@ -870,8 +884,7 @@
port = proxy_port;
}
- if (port == NULL && strchr(host, ':') == NULL)
- port = use_ssl ? OSSL_HTTPS_PORT : OSSL_HTTP_PORT;
+ port = explict_or_default_port(host, port, use_ssl);
cbio = BIO_new_connect(host /* optionally includes ":port" */);
if (cbio == NULL)
@@ -958,8 +971,6 @@
}
if (port != NULL && *port == '\0')
port = NULL;
- if (port == NULL && strchr(server, ':') == NULL)
- port = use_ssl ? OSSL_HTTPS_PORT : OSSL_HTTP_PORT;
proxy = OSSL_HTTP_adapt_proxy(proxy, no_proxy, server, use_ssl);
if (proxy != NULL
&& !OSSL_HTTP_parse_url(proxy, NULL /* use_ssl */, NULL /* user */,
diff --git a/crypto/openssl/crypto/http/http_lib.c b/crypto/openssl/crypto/http/http_lib.c
--- a/crypto/openssl/crypto/http/http_lib.c
+++ b/crypto/openssl/crypto/http/http_lib.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2001-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2001-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -9,11 +9,18 @@
#include <stdio.h> /* for sscanf() */
#include <string.h>
+#ifndef OPENSSL_NO_SOCK
+# include "../bio/bio_local.h" /* for NI_MAXHOST */
+#endif
#include <openssl/http.h>
#include <openssl/httperr.h>
#include <openssl/bio.h> /* for BIO_snprintf() */
#include <openssl/err.h>
#include "internal/cryptlib.h" /* for ossl_assert() */
+#ifndef NI_MAXHOST
+# define NI_MAXHOST 255
+#endif
+#include "crypto/ctype.h" /* for ossl_isspace() */
static void init_pstring(char **pstr)
{
@@ -251,10 +258,17 @@
{
size_t sl;
const char *found = NULL;
+ char host[NI_MAXHOST];
if (!ossl_assert(server != NULL))
return 0;
sl = strlen(server);
+ if (sl >= 2 && sl < sizeof(host) + 2 && server[0] == '[' && server[sl - 1] == ']') {
+ /* strip leading '[' and trailing ']' from escaped IPv6 address */
+ sl -= 2;
+ strncpy(host, server + 1, sl);
+ server = host;
+ }
/*
* using environment variable names, both lowercase and uppercase variants,
@@ -268,8 +282,8 @@
if (no_proxy != NULL)
found = strstr(no_proxy, server);
while (found != NULL
- && ((found != no_proxy && found[-1] != ' ' && found[-1] != ',')
- || (found[sl] != '\0' && found[sl] != ' ' && found[sl] != ',')))
+ && ((found != no_proxy && !ossl_isspace(found[-1]) && found[-1] != ',')
+ || (found[sl] != '\0' && !ossl_isspace(found[sl]) && found[sl] != ',')))
found = strstr(found + 1, server);
return found == NULL;
}
@@ -285,7 +299,7 @@
if (proxy == NULL)
proxy = ossl_safe_getenv(use_ssl ? "https_proxy" : "http_proxy");
if (proxy == NULL)
- proxy = ossl_safe_getenv(use_ssl ? OPENSSL_HTTP_PROXY : OPENSSL_HTTPS_PROXY);
+ proxy = ossl_safe_getenv(use_ssl ? OPENSSL_HTTPS_PROXY : OPENSSL_HTTP_PROXY);
if (proxy == NULL || *proxy == '\0' || !use_proxy(no_proxy, server))
return NULL;
diff --git a/crypto/openssl/crypto/pem/pem_pk8.c b/crypto/openssl/crypto/pem/pem_pk8.c
--- a/crypto/openssl/crypto/pem/pem_pk8.c
+++ b/crypto/openssl/crypto/pem/pem_pk8.c
@@ -173,7 +173,7 @@
X509_SIG *p8 = NULL;
int klen;
EVP_PKEY *ret;
- char psbuf[PEM_BUFSIZE];
+ char psbuf[PEM_BUFSIZE + 1]; /* reserve one byte at the end */
p8 = d2i_PKCS8_bio(bp, NULL);
if (p8 == NULL)
@@ -182,7 +182,7 @@
klen = cb(psbuf, PEM_BUFSIZE, 0, u);
else
klen = PEM_def_callback(psbuf, PEM_BUFSIZE, 0, u);
- if (klen < 0) {
+ if (klen < 0 || klen > PEM_BUFSIZE) {
ERR_raise(ERR_LIB_PEM, PEM_R_BAD_PASSWORD_READ);
X509_SIG_free(p8);
return NULL;
diff --git a/crypto/openssl/crypto/pkcs12/p12_crt.c b/crypto/openssl/crypto/pkcs12/p12_crt.c
--- a/crypto/openssl/crypto/pkcs12/p12_crt.c
+++ b/crypto/openssl/crypto/pkcs12/p12_crt.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1999-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1999-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -210,8 +210,10 @@
/* Make a PKCS#8 structure */
if ((p8 = EVP_PKEY2PKCS8(key)) == NULL)
goto err;
- if (key_usage && !PKCS8_add_keyusage(p8, key_usage))
+ if (key_usage && !PKCS8_add_keyusage(p8, key_usage)) {
+ PKCS8_PRIV_KEY_INFO_free(p8);
goto err;
+ }
if (nid_key != -1) {
/* This call does not take ownership of p8 */
bag = PKCS12_SAFEBAG_create_pkcs8_encrypt_ex(nid_key, pass, -1, NULL, 0,
diff --git a/crypto/openssl/crypto/pkcs7/pk7_doit.c b/crypto/openssl/crypto/pkcs7/pk7_doit.c
--- a/crypto/openssl/crypto/pkcs7/pk7_doit.c
+++ b/crypto/openssl/crypto/pkcs7/pk7_doit.c
@@ -1023,6 +1023,7 @@
STACK_OF(X509_ATTRIBUTE) *sk;
BIO *btmp;
EVP_PKEY *pkey;
+ unsigned char *abuf = NULL;
const PKCS7_CTX *ctx = ossl_pkcs7_get0_ctx(p7);
OSSL_LIB_CTX *libctx = ossl_pkcs7_ctx_get0_libctx(ctx);
const char *propq = ossl_pkcs7_ctx_get0_propq(ctx);
@@ -1072,7 +1073,7 @@
sk = si->auth_attr;
if ((sk != NULL) && (sk_X509_ATTRIBUTE_num(sk) != 0)) {
- unsigned char md_dat[EVP_MAX_MD_SIZE], *abuf = NULL;
+ unsigned char md_dat[EVP_MAX_MD_SIZE];
unsigned int md_len;
int alen;
ASN1_OCTET_STRING *message_digest;
@@ -1114,8 +1115,6 @@
}
if (!EVP_VerifyUpdate(mdc_tmp, abuf, alen))
goto err;
-
- OPENSSL_free(abuf);
}
os = si->enc_digest;
@@ -1133,6 +1132,7 @@
}
ret = 1;
err:
+ OPENSSL_free(abuf);
EVP_MD_CTX_free(mdc_tmp);
EVP_MD_free(fetched_md);
return ret;
diff --git a/crypto/openssl/crypto/pkcs7/pk7_lib.c b/crypto/openssl/crypto/pkcs7/pk7_lib.c
--- a/crypto/openssl/crypto/pkcs7/pk7_lib.c
+++ b/crypto/openssl/crypto/pkcs7/pk7_lib.c
@@ -28,6 +28,11 @@
/* NOTE(emilia): does not support detached digested data. */
case PKCS7_OP_SET_DETACHED_SIGNATURE:
if (nid == NID_pkcs7_signed) {
+ if (p7->d.sign == NULL) {
+ ERR_raise(ERR_LIB_PKCS7, PKCS7_R_NO_CONTENT);
+ ret = 0;
+ break;
+ }
ret = p7->detached = (int)larg;
if (ret && PKCS7_type_is_data(p7->d.sign->contents)) {
ASN1_OCTET_STRING *os;
diff --git a/crypto/openssl/crypto/sm2/sm2_sign.c b/crypto/openssl/crypto/sm2/sm2_sign.c
--- a/crypto/openssl/crypto/sm2/sm2_sign.c
+++ b/crypto/openssl/crypto/sm2/sm2_sign.c
@@ -331,12 +331,10 @@
OSSL_LIB_CTX *libctx = ossl_ec_key_get_libctx(key);
ctx = BN_CTX_new_ex(libctx);
- pt = EC_POINT_new(group);
- if (ctx == NULL || pt == NULL) {
+ if (ctx == NULL) {
ERR_raise(ERR_LIB_SM2, ERR_R_MALLOC_FAILURE);
goto done;
}
-
BN_CTX_start(ctx);
t = BN_CTX_get(ctx);
x1 = BN_CTX_get(ctx);
@@ -345,6 +343,12 @@
goto done;
}
+ pt = EC_POINT_new(group);
+ if (pt == NULL) {
+ ERR_raise(ERR_LIB_SM2, ERR_R_MALLOC_FAILURE);
+ goto done;
+ }
+
/*
* B1: verify whether r' in [1,n-1], verification failed if not
* B2: verify whether s' in [1,n-1], verification failed if not
diff --git a/crypto/openssl/crypto/srp/srp_vfy.c b/crypto/openssl/crypto/srp/srp_vfy.c
--- a/crypto/openssl/crypto/srp/srp_vfy.c
+++ b/crypto/openssl/crypto/srp/srp_vfy.c
@@ -216,6 +216,8 @@
{
OPENSSL_free(vinfo->id);
OPENSSL_free(vinfo->info);
+ vinfo->id = NULL;
+ vinfo->info = NULL;
if (id != NULL && NULL == (vinfo->id = OPENSSL_strdup(id)))
return 0;
return (info == NULL || NULL != (vinfo->info = OPENSSL_strdup(info)));
diff --git a/crypto/openssl/crypto/threads_win.c b/crypto/openssl/crypto/threads_win.c
--- a/crypto/openssl/crypto/threads_win.c
+++ b/crypto/openssl/crypto/threads_win.c
@@ -212,7 +212,8 @@
int CRYPTO_atomic_add(int *val, int amount, int *ret, CRYPTO_RWLOCK *lock)
{
- *ret = (int)InterlockedExchangeAdd((long volatile *)val, (long)amount) + amount;
+ *ret = (int)InterlockedExchangeAdd((LONG volatile *)val, (LONG)amount)
+ + amount;
return 1;
}
diff --git a/crypto/openssl/crypto/trace.c b/crypto/openssl/crypto/trace.c
--- a/crypto/openssl/crypto/trace.c
+++ b/crypto/openssl/crypto/trace.c
@@ -473,7 +473,7 @@
char *prefix = NULL;
category = ossl_trace_get_category(category);
- if (category < 0)
+ if (category < 0 || !OSSL_trace_enabled(category))
return NULL;
channel = trace_channels[category].bio;
diff --git a/crypto/openssl/crypto/ui/ui_util.c b/crypto/openssl/crypto/ui/ui_util.c
--- a/crypto/openssl/crypto/ui/ui_util.c
+++ b/crypto/openssl/crypto/ui/ui_util.c
@@ -105,14 +105,18 @@
switch (UI_get_string_type(uis)) {
case UIT_PROMPT:
{
- char result[PEM_BUFSIZE + 1];
+ int len;
+ char result[PEM_BUFSIZE + 1]; /* reserve one byte at the end */
const struct pem_password_cb_data *data =
UI_method_get_ex_data(UI_get_method(ui), ui_method_data_index);
int maxsize = UI_get_result_maxsize(uis);
- int len = data->cb(result,
- maxsize > PEM_BUFSIZE ? PEM_BUFSIZE : maxsize,
- data->rwflag, UI_get0_user_data(ui));
+ if (maxsize > PEM_BUFSIZE)
+ maxsize = PEM_BUFSIZE;
+ len = data->cb(result, maxsize, data->rwflag,
+ UI_get0_user_data(ui));
+ if (len > maxsize)
+ return -1;
if (len >= 0)
result[len] = '\0';
if (len < 0)
diff --git a/crypto/openssl/crypto/x509/v3_admis.c b/crypto/openssl/crypto/x509/v3_admis.c
--- a/crypto/openssl/crypto/x509/v3_admis.c
+++ b/crypto/openssl/crypto/x509/v3_admis.c
@@ -67,11 +67,10 @@
NULL /* extension-specific data */
};
-
static int i2r_NAMING_AUTHORITY(const struct v3_ext_method *method, void *in,
BIO *bp, int ind)
{
- NAMING_AUTHORITY * namingAuthority = (NAMING_AUTHORITY*) in;
+ NAMING_AUTHORITY *namingAuthority = (NAMING_AUTHORITY *) in;
if (namingAuthority == NULL)
return 0;
@@ -81,14 +80,14 @@
&& namingAuthority->namingAuthorityUrl == NULL)
return 0;
- if (BIO_printf(bp, "%*snamingAuthority: ", ind, "") <= 0)
+ if (BIO_printf(bp, "%*snamingAuthority:\n", ind, "") <= 0)
goto err;
if (namingAuthority->namingAuthorityId != NULL) {
char objbuf[128];
const char *ln = OBJ_nid2ln(OBJ_obj2nid(namingAuthority->namingAuthorityId));
- if (BIO_printf(bp, "%*s admissionAuthorityId: ", ind, "") <= 0)
+ if (BIO_printf(bp, "%*s namingAuthorityId: ", ind, "") <= 0)
goto err;
OBJ_obj2txt(objbuf, sizeof(objbuf), namingAuthority->namingAuthorityId, 1);
@@ -130,9 +129,10 @@
}
for (i = 0; i < sk_ADMISSIONS_num(admission->contentsOfAdmissions); i++) {
- ADMISSIONS* entry = sk_ADMISSIONS_value(admission->contentsOfAdmissions, i);
+ ADMISSIONS *entry = sk_ADMISSIONS_value(admission->contentsOfAdmissions, i);
- if (BIO_printf(bp, "%*sEntry %0d:\n", ind, "", 1 + i) <= 0) goto err;
+ if (BIO_printf(bp, "%*sEntry %0d:\n", ind, "", 1 + i) <= 0)
+ goto err;
if (entry->admissionAuthority != NULL) {
if (BIO_printf(bp, "%*s admissionAuthority:\n", ind, "") <= 0
@@ -143,12 +143,12 @@
}
if (entry->namingAuthority != NULL) {
- if (i2r_NAMING_AUTHORITY(method, entry->namingAuthority, bp, ind) <= 0)
+ if (i2r_NAMING_AUTHORITY(method, entry->namingAuthority, bp, ind + 2) <= 0)
goto err;
}
for (j = 0; j < sk_PROFESSION_INFO_num(entry->professionInfos); j++) {
- PROFESSION_INFO* pinfo = sk_PROFESSION_INFO_value(entry->professionInfos, j);
+ PROFESSION_INFO *pinfo = sk_PROFESSION_INFO_value(entry->professionInfos, j);
if (BIO_printf(bp, "%*s Profession Info Entry %0d:\n", ind, "", 1 + j) <= 0)
goto err;
@@ -161,7 +161,7 @@
}
if (pinfo->namingAuthority != NULL) {
- if (i2r_NAMING_AUTHORITY(method, pinfo->namingAuthority, bp, ind + 2) <= 0)
+ if (i2r_NAMING_AUTHORITY(method, pinfo->namingAuthority, bp, ind + 4) <= 0)
goto err;
}
@@ -170,7 +170,7 @@
if (BIO_printf(bp, "%*s Info Entries:\n", ind, "") <= 0)
goto err;
for (k = 0; k < sk_ASN1_STRING_num(pinfo->professionItems); k++) {
- ASN1_STRING* val = sk_ASN1_STRING_value(pinfo->professionItems, k);
+ ASN1_STRING *val = sk_ASN1_STRING_value(pinfo->professionItems, k);
if (BIO_printf(bp, "%*s ", ind, "") <= 0
|| ASN1_STRING_print(bp, val) <= 0
@@ -183,7 +183,7 @@
if (BIO_printf(bp, "%*s Profession OIDs:\n", ind, "") <= 0)
goto err;
for (k = 0; k < sk_ASN1_OBJECT_num(pinfo->professionOIDs); k++) {
- ASN1_OBJECT* obj = sk_ASN1_OBJECT_value(pinfo->professionOIDs, k);
+ ASN1_OBJECT *obj = sk_ASN1_OBJECT_value(pinfo->professionOIDs, k);
const char *ln = OBJ_nid2ln(OBJ_obj2nid(obj));
char objbuf[128];
@@ -207,31 +207,29 @@
return n->namingAuthorityId;
}
-void NAMING_AUTHORITY_set0_authorityId(NAMING_AUTHORITY *n, ASN1_OBJECT* id)
+void NAMING_AUTHORITY_set0_authorityId(NAMING_AUTHORITY *n, ASN1_OBJECT *id)
{
ASN1_OBJECT_free(n->namingAuthorityId);
n->namingAuthorityId = id;
}
-const ASN1_IA5STRING *NAMING_AUTHORITY_get0_authorityURL(
- const NAMING_AUTHORITY *n)
+const ASN1_IA5STRING *NAMING_AUTHORITY_get0_authorityURL(const NAMING_AUTHORITY *n)
{
return n->namingAuthorityUrl;
}
-void NAMING_AUTHORITY_set0_authorityURL(NAMING_AUTHORITY *n, ASN1_IA5STRING* u)
+void NAMING_AUTHORITY_set0_authorityURL(NAMING_AUTHORITY *n, ASN1_IA5STRING *u)
{
ASN1_IA5STRING_free(n->namingAuthorityUrl);
n->namingAuthorityUrl = u;
}
-const ASN1_STRING *NAMING_AUTHORITY_get0_authorityText(
- const NAMING_AUTHORITY *n)
+const ASN1_STRING *NAMING_AUTHORITY_get0_authorityText(const NAMING_AUTHORITY *n)
{
return n->namingAuthorityText;
}
-void NAMING_AUTHORITY_set0_authorityText(NAMING_AUTHORITY *n, ASN1_STRING* t)
+void NAMING_AUTHORITY_set0_authorityText(NAMING_AUTHORITY *n, ASN1_STRING *t)
{
ASN1_IA5STRING_free(n->namingAuthorityText);
n->namingAuthorityText = t;
diff --git a/crypto/openssl/crypto/x509/v3_san.c b/crypto/openssl/crypto/x509/v3_san.c
--- a/crypto/openssl/crypto/x509/v3_san.c
+++ b/crypto/openssl/crypto/x509/v3_san.c
@@ -336,7 +336,7 @@
static int copy_issuer(X509V3_CTX *ctx, GENERAL_NAMES *gens)
{
- GENERAL_NAMES *ialt;
+ GENERAL_NAMES *ialt = NULL;
GENERAL_NAME *gen;
X509_EXTENSION *ext;
int i, num;
@@ -371,6 +371,7 @@
return 1;
err:
+ sk_GENERAL_NAME_free(ialt);
return 0;
}
diff --git a/crypto/openssl/crypto/x509/x509_cmp.c b/crypto/openssl/crypto/x509/x509_cmp.c
--- a/crypto/openssl/crypto/x509/x509_cmp.c
+++ b/crypto/openssl/crypto/x509/x509_cmp.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1995-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -196,6 +196,8 @@
ERR_raise(ERR_LIB_X509, ERR_R_PASSED_NULL_PARAMETER);
return 0;
}
+ if (cert == NULL)
+ return 0;
if ((flags & X509_ADD_FLAG_NO_DUP) != 0) {
/*
* not using sk_X509_set_cmp_func() and sk_X509_find()
diff --git a/crypto/openssl/crypto/x509/x_all.c b/crypto/openssl/crypto/x509/x_all.c
--- a/crypto/openssl/crypto/x509/x_all.c
+++ b/crypto/openssl/crypto/x509/x_all.c
@@ -92,11 +92,13 @@
static ASN1_VALUE *simple_get_asn1(const char *url, BIO *bio, BIO *rbio,
int timeout, const ASN1_ITEM *it)
{
+ size_t max_resp_len = (it == ASN1_ITEM_rptr(X509_CRL)) ?
+ OSSL_HTTP_DEFAULT_MAX_CRL_LEN : OSSL_HTTP_DEFAULT_MAX_RESP_LEN;
BIO *mem = OSSL_HTTP_get(url, NULL /* proxy */, NULL /* no_proxy */,
bio, rbio, NULL /* cb */, NULL /* arg */,
1024 /* buf_size */, NULL /* headers */,
NULL /* expected_ct */, 1 /* expect_asn1 */,
- OSSL_HTTP_DEFAULT_MAX_RESP_LEN, timeout);
+ max_resp_len, timeout);
ASN1_VALUE *res = ASN1_item_d2i_bio(it, mem, NULL);
BIO_free(mem);
diff --git a/crypto/openssl/demos/cipher/aesccm.c b/crypto/openssl/demos/cipher/aesccm.c
--- a/crypto/openssl/demos/cipher/aesccm.c
+++ b/crypto/openssl/demos/cipher/aesccm.c
@@ -94,7 +94,7 @@
if ((cipher = EVP_CIPHER_fetch(libctx, "AES-192-CCM", propq)) == NULL)
goto err;
- /* Set nonce length if default 96 bits is not appropriate */
+ /* Default nonce length for AES-CCM is 7 bytes (56 bits). */
params[0] = OSSL_PARAM_construct_size_t(OSSL_CIPHER_PARAM_AEAD_IVLEN,
&ccm_nonce_len);
/* Set tag length */
diff --git a/crypto/openssl/doc/man1/openssl-ca.pod.in b/crypto/openssl/doc/man1/openssl-ca.pod.in
--- a/crypto/openssl/doc/man1/openssl-ca.pod.in
+++ b/crypto/openssl/doc/man1/openssl-ca.pod.in
@@ -701,7 +701,7 @@
default_days = 365 # how long to certify for
default_crl_days= 30 # how long before next CRL
- default_md = md5 # md to use
+ default_md = sha256 # md to use
policy = policy_any # default policy
email_in_dn = no # Don't add the email into cert DN
diff --git a/crypto/openssl/doc/man1/openssl-cmp.pod.in b/crypto/openssl/doc/man1/openssl-cmp.pod.in
--- a/crypto/openssl/doc/man1/openssl-cmp.pod.in
+++ b/crypto/openssl/doc/man1/openssl-cmp.pod.in
@@ -453,8 +453,11 @@
=item B<-server> I<[http[s]://][userinfo@]host[:port][/path][?query][#fragment]>
-The DNS hostname or IP address and optionally port
+The I<host> domain name or IP address and optionally I<port>
of the CMP server to connect to using HTTP(S).
+IP address may be for v4 or v6, such as C<127.0.0.1> or C<[::1]> for localhost.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
+
This option excludes I<-port> and I<-use_mock_srv>.
It is ignored if I<-rspin> is given with enough filename arguments.
@@ -468,6 +471,7 @@
The HTTP(S) proxy server to use for reaching the CMP server unless B<-no_proxy>
applies, see below.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
The proxy port defaults to 80 or 443 if the scheme is C<https>; apart from that
the optional C<http://> or C<https://> prefix is ignored (note that TLS may be
selected by B<-tls_used>), as well as any path, userinfo, and query, and fragment
@@ -969,8 +973,9 @@
=item B<-port> I<number>
-Act as HTTP-based CMP server mock-up listening on the given port.
-This excludes the B<-server> and B<-use_mock_srv> options.
+Act as HTTP-based CMP server mock-up listening on the given local port.
+The client may address the server via, e.g., C<127.0.0.1> or C<[::1]>.
+This option excludes the B<-server> and B<-use_mock_srv> options.
The B<-rspin>, B<-rspout>, B<-reqin>, and B<-reqout> options
so far are not supported in this mode.
diff --git a/crypto/openssl/doc/man1/openssl-cms.pod.in b/crypto/openssl/doc/man1/openssl-cms.pod.in
--- a/crypto/openssl/doc/man1/openssl-cms.pod.in
+++ b/crypto/openssl/doc/man1/openssl-cms.pod.in
@@ -191,6 +191,10 @@
Verify signed data. Expects a signed data on input and outputs
the signed data. Both clear text and opaque signing is supported.
+By default, validation of signer certificates and their chain
+is done w.r.t. the S/MIME signing (C<smimesign>) purpose.
+For details see L<openssl-verification-options(1)/Certificate Extensions>.
+
=item B<-resign>
Resign a message: take an existing message and one or more new signers.
@@ -374,7 +378,8 @@
=item B<-originator> I<file>
A certificate of the originator of the encrypted message. Necessary for
-decryption when Key Agreement is in use for a shared key.
+decryption when Key Agreement is in use for a shared key. Currently, not
+allowed for encryption.
=item B<-recip> I<file>
@@ -902,7 +907,7 @@
=head1 COPYRIGHT
-Copyright 2008-2023 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2008-2025 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/doc/man1/openssl-fipsinstall.pod.in b/crypto/openssl/doc/man1/openssl-fipsinstall.pod.in
--- a/crypto/openssl/doc/man1/openssl-fipsinstall.pod.in
+++ b/crypto/openssl/doc/man1/openssl-fipsinstall.pod.in
@@ -239,6 +239,10 @@
L<OSSL_PROVIDER-FIPS(7)>,
L<EVP_MAC(3)>
+=head1 HISTORY
+
+The B<openssl-fipsinstall> application was added in OpenSSL 3.0.
+
=head1 COPYRIGHT
Copyright 2019-2021 The OpenSSL Project Authors. All Rights Reserved.
diff --git a/crypto/openssl/doc/man1/openssl-ocsp.pod.in b/crypto/openssl/doc/man1/openssl-ocsp.pod.in
--- a/crypto/openssl/doc/man1/openssl-ocsp.pod.in
+++ b/crypto/openssl/doc/man1/openssl-ocsp.pod.in
@@ -30,8 +30,8 @@
[B<-respin> I<file>]
[B<-url> I<URL>]
[B<-host> I<host>:I<port>]
-[B<-path>]
-[B<-proxy> I<[http[s]://][userinfo@]host[:port][/path]>]
+[B<-path> I<pathname>]
+[B<-proxy> I<[http[s]://][userinfo@]host[:port][/path][?query][#fragment]>]
[B<-no_proxy> I<addresses>]
[B<-header>]
[B<-timeout> I<seconds>]
@@ -160,24 +160,32 @@
=item B<-url> I<responder_url>
-Specify the responder URL. Both HTTP and HTTPS (SSL/TLS) URLs can be specified.
+Specify the responder host and optionally port and path via a URL.
+Both HTTP and HTTPS (SSL/TLS) URLs can be specified.
The optional userinfo and fragment components are ignored.
Any given query component is handled as part of the path component.
+For details, see the B<-host> and B<-path> options described next.
-=item B<-host> I<hostname>:I<port>, B<-path> I<pathname>
+=item B<-host> I<host>:I<port>, B<-path> I<pathname>
If the B<-host> option is present then the OCSP request is sent to the host
-I<hostname> on port I<port>. The B<-path> option specifies the HTTP pathname
-to use or "/" by default. This is equivalent to specifying B<-url> with scheme
-http:// and the given hostname, port, and pathname.
+I<host> on port I<port>.
+The I<host> may be a domain name or an IP (v4 or v6) address,
+such as C<127.0.0.1> or C<[::1]> for localhost.
+If it is an IPv6 address, it must be enclosed in C<[> and C<]>.
-=item B<-proxy> I<[http[s]://][userinfo@]host[:port][/path]>
+The B<-path> option specifies the HTTP pathname to use or "/" by default.
+This is equivalent to specifying B<-url> with scheme
+http:// and the given I<host>, I<port>, and optional I<pathname>.
+
+=item B<-proxy> I<[http[s]://][userinfo@]host[:port][/path][?query][#fragment]>
The HTTP(S) proxy server to use for reaching the OCSP server unless B<-no_proxy>
applies, see below.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
The proxy port defaults to 80 or 443 if the scheme is C<https>; apart from that
the optional C<http://> or C<https://> prefix is ignored,
-as well as any userinfo and path components.
+as well as any userinfo, path, query, and fragment components.
Defaults to the environment variable C<http_proxy> if set, else C<HTTP_PROXY>
in case no TLS is used, otherwise C<https_proxy> if set, else C<HTTPS_PROXY>.
@@ -369,8 +377,8 @@
=item B<-port> I<portnum>
-Port to listen for OCSP requests on. The port may also be specified
-using the B<url> option.
+Port to listen for OCSP requests on. Both IPv4 and IPv6 are possible.
+The port may also be specified using the B<-url> option.
A C<0> argument indicates that any available port shall be chosen automatically.
=item B<-ignore_err>
diff --git a/crypto/openssl/doc/man1/openssl-pkeyutl.pod.in b/crypto/openssl/doc/man1/openssl-pkeyutl.pod.in
--- a/crypto/openssl/doc/man1/openssl-pkeyutl.pod.in
+++ b/crypto/openssl/doc/man1/openssl-pkeyutl.pod.in
@@ -44,6 +44,8 @@
This command can be used to perform low-level public key
operations using any supported algorithm.
+By default the signing operation (see B<-sign> option) is assumed.
+
=head1 OPTIONS
=over 4
@@ -59,20 +61,29 @@
=item B<-rawin>
-This indicates that the input data is raw data, which is not hashed by any
-message digest algorithm. The user can specify a digest algorithm by using
-the B<-digest> option. This option can only be used with B<-sign> and
-B<-verify> and must be used with the Ed25519 and Ed448 algorithms.
+This indicates that the signature or verification input data is raw data,
+which is not hashed by any message digest algorithm.
+Except with EdDSA,
+the user can specify a digest algorithm by using the B<-digest> option.
+For signature algorithms like RSA, DSA and ECDSA,
+the default digest algorithm is SHA-256. For SM2, it is SM3.
+
+This option can only be used with B<-sign> and B<-verify>.
+For EdDSA (the Ed25519 and Ed448 algorithms) this option is required.
=item B<-digest> I<algorithm>
-This specifies the digest algorithm which is used to hash the input data before
-signing or verifying it with the input key. This option could be omitted if the
-signature algorithm does not require one (for instance, EdDSA). If this option
-is omitted but the signature algorithm requires one, a default value will be
-used. For signature algorithms like RSA, DSA and ECDSA, SHA-256 will be the
-default digest algorithm. For SM2, it will be SM3. If this option is present,
-then the B<-rawin> option must be also specified.
+This option can only be used with B<-sign> and B<-verify>.
+It specifies the digest algorithm that is used to hash the input data
+before signing or verifying it with the input key. This option could be omitted
+if the signature algorithm does not require preprocessing the input through
+a pluggable hash function before signing (for instance, EdDSA). If this option
+is omitted but the signature algorithm requires one and the B<-rawin> option
+is given, a default value will be used (see B<-rawin> for details).
+If this option is present, then the B<-rawin> option is required.
+
+At this time, HashEdDSA (the ph or "prehash" variant of EdDSA) is not supported,
+so the B<-digest> option cannot be used with EdDSA.
=item B<-out> I<filename>
@@ -81,7 +92,7 @@
=item B<-sigfile> I<file>
-Signature file, required for B<-verify> operations only
+Signature file, required and allowed for B<-verify> operations only
=item B<-inkey> I<filename>|I<uri>
@@ -117,21 +128,42 @@
=item B<-rev>
Reverse the order of the input buffer. This is useful for some libraries
-(such as CryptoAPI) which represent the buffer in little endian format.
+(such as CryptoAPI) which represent the buffer in little-endian format.
+This cannot be used in conjunction with B<-rawin>.
=item B<-sign>
-Sign the input data (which must be a hash) and output the signed result. This
-requires a private key.
+Sign the input data and output the signed result. This requires a private key.
+Using a message digest operation along with this is recommended,
+when applicable, see the B<-rawin> and B<-digest> options for details.
+Otherwise, the input data given with the B<-in> option is assumed to already
+be a digest, but this may then require an additional B<-pkeyopt> C<digest:>I<md>
+in some cases (e.g., RSA with the default PKCS#1 padding mode).
+Even for other algorithms like ECDSA, where the additional B<-pkeyopt> option
+does not affect signature output, it is recommended, as it enables
+checking that the input length is consistent with the intended digest.
=item B<-verify>
-Verify the input data (which must be a hash) against the signature file and
-indicate if the verification succeeded or failed.
+Verify the input data against the signature given with the B<-sigfile> option
+and indicate if the verification succeeded or failed.
+The input data given with the B<-in> option is assumed to be a hash value
+unless the B<-rawin> option is specified or implied.
+With raw data, when a digest algorithm is applicable, though it may be inferred
+from the signature or take a default value, it should also be specified.
=item B<-verifyrecover>
-Verify the input data (which must be a hash) and output the recovered data.
+Verify the given signature and output the recovered data (signature payload).
+For example, in case of RSA PKCS#1 the recovered data is the B<EMSA-PKCS-v1_5>
+DER encoding of the digest algorithm OID and value as specified in
+L<RFC8017 Section 9.2|https://datatracker.ietf.org/doc/html/rfc8017#section-9.2>.
+
+Note that here the input given with the B<-in> option is not a signature input
+(as with the B<-sign> and B<-verify> options) but a signature output value,
+typically produced using the B<-sign> option.
+
+This option is available only for use with RSA keys.
=item B<-encrypt>
@@ -175,8 +207,9 @@
=item B<-asn1parse>
-Parse the ASN.1 output data, this is useful when combined with the
-B<-verifyrecover> option when an ASN1 structure is signed.
+Parse the ASN.1 output data to check its DER encoding and print any errors.
+When combined with the B<-verifyrecover> option, this may be useful only in case
+an ASN.1 DER-encoded structure had been signed directly (without hashing it).
{- $OpenSSL::safe::opt_engine_item -}
@@ -200,8 +233,8 @@
The operations and options supported vary according to the key algorithm
and its implementation. The OpenSSL operations and options are indicated below.
-Unless otherwise mentioned all algorithms support the B<digest:>I<alg> option
-which specifies the digest in use for sign, verify and verifyrecover operations.
+Unless otherwise mentioned, all algorithms support the B<digest:>I<alg> option,
+which specifies the digest in use for the signing and verification operations.
The value I<alg> should represent a digest name as used in the
EVP_get_digestbyname() function for example B<sha1>. This value is not used to
hash the input data. It is used (by some algorithms) for sanity-checking the
diff --git a/crypto/openssl/doc/man1/openssl-req.pod.in b/crypto/openssl/doc/man1/openssl-req.pod.in
--- a/crypto/openssl/doc/man1/openssl-req.pod.in
+++ b/crypto/openssl/doc/man1/openssl-req.pod.in
@@ -638,7 +638,7 @@
attributes = req_attributes
req_extensions = v3_ca
- dirstring_type = nobmp
+ dirstring_type = nombstr
[ req_distinguished_name ]
countryName = Country Name (2 letter code)
@@ -778,7 +778,7 @@
=head1 COPYRIGHT
-Copyright 2000-2024 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2025 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/doc/man1/openssl-s_client.pod.in b/crypto/openssl/doc/man1/openssl-s_client.pod.in
--- a/crypto/openssl/doc/man1/openssl-s_client.pod.in
+++ b/crypto/openssl/doc/man1/openssl-s_client.pod.in
@@ -10,11 +10,11 @@
B<openssl> B<s_client>
[B<-help>]
[B<-ssl_config> I<section>]
-[B<-connect> I<host:port>]
+[B<-connect> I<host>:I<port>]
[B<-host> I<hostname>]
[B<-port> I<port>]
-[B<-bind> I<host:port>]
-[B<-proxy> I<host:port>]
+[B<-bind> I<host>:I<port>]
+[B<-proxy> I<host>:I<port>]
[B<-proxy_user> I<userid>]
[B<-proxy_pass> I<arg>]
[B<-unix> I<path>]
@@ -157,6 +157,7 @@
select the host and port using the optional target positional argument instead.
If neither this nor the target positional argument are specified then an attempt
is made to connect to the local host on port 4433.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
=item B<-host> I<hostname>
@@ -166,17 +167,19 @@
Connect to the specified port; use B<-connect> instead.
-=item B<-bind> I<host:port>
+=item B<-bind> I<host>:I<port>
This specifies the host address and or port to bind as the source for the
connection. For Unix-domain sockets the port is ignored and the host is
used as the source socket address.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
-=item B<-proxy> I<host:port>
+=item B<-proxy> I<host>:I<port>
When used with the B<-connect> flag, the program uses the host and port
specified with this flag and issues an HTTP CONNECT command to connect
to the desired server.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
=item B<-proxy_user> I<userid>
@@ -260,7 +263,9 @@
=item B<-crl_download>
-Download CRL from distribution points in the certificate.
+Download CRL from distribution points in the certificate. Note that this option
+is ignored if B<-crl_check> option is not provided. Note that the maximum size
+of CRL is limited by L<X509_CRL_load_http(3)> function.
=item B<-key> I<filename>|I<uri>
@@ -282,14 +287,20 @@
The verify depth to use. This specifies the maximum length of the
server certificate chain and turns on server certificate verification.
-Currently the verify operation continues after errors so all the problems
+Unless the B<-verify_return_error> option is given,
+the verify operation continues after errors so all the problems
with a certificate chain can be seen. As a side effect the connection
will never fail due to a server certificate verify failure.
+By default, validation of server certificates and their chain
+is done w.r.t. the (D)TLS Server (C<sslserver>) purpose.
+For details see L<openssl-verification-options(1)/Certificate Extensions>.
+
=item B<-verify_return_error>
-Return verification errors instead of continuing. This will typically
-abort the handshake with a fatal error.
+Turns on server certificate verification, like with B<-verify>,
+but returns verification errors instead of continuing.
+This will typically abort the handshake with a fatal error.
=item B<-verify_quiet>
@@ -799,10 +810,11 @@
=item I<host>:I<port>
-Rather than providing B<-connect>, the target hostname and optional port may
+Rather than providing B<-connect>, the target host and optional port may
be provided as a single positional argument after all options. If neither this
nor B<-connect> are provided, falls back to attempting to connect to
I<localhost> on port I<4433>.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
=back
@@ -881,6 +893,51 @@
The B<-bind> option may be useful if the server or a firewall requires
connections to come from some particular address and or port.
+=head2 Note on Non-Interactive Use
+
+When B<s_client> is run in a non-interactive environment (e.g., a cron job or
+a script without a valid I<stdin>), it may close the connection prematurely,
+especially with TLS 1.3. To prevent this, you can use the B<-ign_eof> flag,
+which keeps B<s_client> running even after reaching EOF from I<stdin>.
+
+For example:
+
+ openssl s_client -connect <server address>:443 -tls1_3
+ -sess_out /path/to/tls_session_params_file
+ -ign_eof </dev/null
+
+However, relying solely on B<-ign_eof> can lead to issues if the server keeps
+the connection open, expecting the client to close first. In such cases, the
+client may hang indefinitely. This behavior is not uncommon, particularly with
+protocols where the server waits for a graceful disconnect from the client.
+
+For example, when connecting to an SMTP server, the session may pause if the
+server expects a QUIT command before closing:
+
+ $ openssl s_client -brief -ign_eof -starttls smtp
+ -connect <server address>:25 </dev/null
+ CONNECTION ESTABLISHED
+ Protocol version: TLSv1.3
+ Ciphersuite: TLS_AES_256_GCM_SHA384
+ ...
+ 250 CHUNKING
+ [long pause]
+
+To avoid such hangs, it's better to use an application-level command to
+initiate a clean disconnect. For SMTP, you can send a QUIT command:
+
+ printf 'QUIT\r\n' | openssl s_client -connect <server address>:25
+ -starttls smtp -brief -ign_eof
+
+Similarly, for HTTP/1.1 connections, including a `Connection: close` header
+ensures the server closes the connection after responding:
+
+ printf 'GET / HTTP/1.1\r\nHost: <server address>\r\nConnection: close\r\n\r\n'
+ | openssl s_client -connect <server address>:443 -brief
+
+These approaches help manage the connection closure gracefully and prevent
+hangs caused by the server waiting for the client to initiate the disconnect.
+
=head1 BUGS
Because this program has a lot of options and also because some of the
diff --git a/crypto/openssl/doc/man1/openssl-s_server.pod.in b/crypto/openssl/doc/man1/openssl-s_server.pod.in
--- a/crypto/openssl/doc/man1/openssl-s_server.pod.in
+++ b/crypto/openssl/doc/man1/openssl-s_server.pod.in
@@ -74,7 +74,7 @@
[B<-status>]
[B<-status_verbose>]
[B<-status_timeout> I<int>]
-[B<-proxy> I<[http[s]://][userinfo@]host[:port][/path]>]
+[B<-proxy> I<[http[s]://][userinfo@]host[:port][/path][?query][#fragment]>]
[B<-no_proxy> I<addresses>]
[B<-status_url> I<val>]
[B<-status_file> I<infile>]
@@ -202,6 +202,10 @@
If the cipher suite cannot request a client certificate (for example an
anonymous cipher suite or PSK) this option has no effect.
+By default, validation of any supplied client certificate and its chain
+is done w.r.t. the (D)TLS Client (C<sslclient>) purpose.
+For details see L<openssl-verification-options(1)/Certificate Extensions>.
+
=item B<-cert> I<infile>
The certificate to use, most servers cipher suites require the use of a
@@ -504,13 +508,14 @@
Sets the timeout for OCSP response to I<int> seconds.
-=item B<-proxy> I<[http[s]://][userinfo@]host[:port][/path]>
+=item B<-proxy> I<[http[s]://][userinfo@]host[:port][/path][?query][#fragment]>
The HTTP(S) proxy server to use for reaching the OCSP server unless B<-no_proxy>
applies, see below.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
The proxy port defaults to 80 or 443 if the scheme is C<https>; apart from that
the optional C<http://> or C<https://> prefix is ignored,
-as well as any userinfo and path components.
+as well as any userinfo, path, query, and fragment components.
Defaults to the environment variable C<http_proxy> if set, else C<HTTP_PROXY>
in case no TLS is used, otherwise C<https_proxy> if set, else C<HTTPS_PROXY>.
diff --git a/crypto/openssl/doc/man1/openssl-s_time.pod.in b/crypto/openssl/doc/man1/openssl-s_time.pod.in
--- a/crypto/openssl/doc/man1/openssl-s_time.pod.in
+++ b/crypto/openssl/doc/man1/openssl-s_time.pod.in
@@ -50,6 +50,7 @@
=item B<-connect> I<host>:I<port>
This specifies the host and optional port to connect to.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
=item B<-www> I<page>
diff --git a/crypto/openssl/doc/man1/openssl-smime.pod.in b/crypto/openssl/doc/man1/openssl-smime.pod.in
--- a/crypto/openssl/doc/man1/openssl-smime.pod.in
+++ b/crypto/openssl/doc/man1/openssl-smime.pod.in
@@ -394,9 +394,9 @@
Send encrypted mail using triple DES:
- openssl smime -encrypt -in in.txt -from steve@openssl.org \
+ openssl smime -encrypt -in in.txt -out mail.msg -from steve@openssl.org \
-to someone@somewhere -subject "Encrypted message" \
- -des3 user.pem -out mail.msg
+ -des3 user.pem
Sign and encrypt mail:
diff --git a/crypto/openssl/doc/man1/openssl-ts.pod.in b/crypto/openssl/doc/man1/openssl-ts.pod.in
--- a/crypto/openssl/doc/man1/openssl-ts.pod.in
+++ b/crypto/openssl/doc/man1/openssl-ts.pod.in
@@ -584,10 +584,12 @@
-CAfile cacert.pem
To verify a timestamp token against the original data file:
+
openssl ts -verify -data design2.txt -in design2.tsr \
-CAfile cacert.pem
To verify a timestamp token against a message imprint:
+
openssl ts -verify -digest b7e5d3f93198b38379852f2c04e78d73abdd0f4b \
-in design2.tsr -CAfile cacert.pem
diff --git a/crypto/openssl/doc/man1/openssl-verification-options.pod b/crypto/openssl/doc/man1/openssl-verification-options.pod
--- a/crypto/openssl/doc/man1/openssl-verification-options.pod
+++ b/crypto/openssl/doc/man1/openssl-verification-options.pod
@@ -24,8 +24,9 @@
In a nutshell, a valid chain of certificates needs to be built up and verified
starting from the I<target certificate> that is to be verified
and ending in a certificate that due to some policy is trusted.
-Verification is done relative to the given I<purpose>, which is the intended use
-of the target certificate, such as SSL server, or by default for any purpose.
+Certificate validation can be performed in the context of a I<purpose>, which
+is a high-level specification of the intended use of the target certificate,
+such as C<sslserver> for TLS servers, or (by default) for any purpose.
The details of how each OpenSSL command handles errors
are documented on the specific command page.
@@ -150,16 +151,17 @@
The first step is to check that each certificate is well-formed.
Part of these checks are enabled only if the B<-x509_strict> option is given.
-The second step is to check the extensions of every untrusted certificate
-for consistency with the supplied purpose.
-If the B<-purpose> option is not given then no such checks are done
-except for SSL/TLS connection setup,
-where by default C<sslserver> or C<sslclient>, are checked.
-The target or "leaf" certificate, as well as any other untrusted certificates,
-must have extensions compatible with the specified purpose.
-All certificates except the target or "leaf" must also be valid CA certificates.
-The precise extensions required are described in more detail in
-L<openssl-x509(1)/CERTIFICATE EXTENSIONS>.
+The second step is to check the X.509v3 extensions of every certificate
+for consistency with the intended specific purpose, if any.
+If the B<-purpose> option is not given then no such checks are done except for
+CMS signature checking, where by default C<smimesign> is checked, and SSL/(D)TLS
+connection setup, where by default C<sslserver> or C<sslclient> are checked.
+The X.509v3 extensions of the target or "leaf" certificate
+must be compatible with the specified purpose.
+All other certificates down the chain are checked to be valid CA certificates,
+and possibly also further non-standard checks are performed.
+The precise extensions required are described in detail
+in the L</Certificate Extensions> section below.
The third step is to check the trust settings on the last certificate
(which typically is a self-signed root CA certificate).
@@ -455,13 +457,16 @@
=item B<-purpose> I<purpose>
-The intended use for the certificate.
-Currently defined purposes are C<sslclient>, C<sslserver>, C<nssslserver>,
+A high-level specification of the intended use of the target certificate.
+Currently predefined purposes are C<sslclient>, C<sslserver>, C<nssslserver>,
C<smimesign>, C<smimeencrypt>, C<crlsign>, C<ocsphelper>, C<timestampsign>,
and C<any>.
If peer certificate verification is enabled, by default the TLS implementation
-as well as the commands B<s_client> and B<s_server> check for consistency
-with TLS server or TLS client use, respectively.
+and thus the commands L<openssl-s_client(1)> and L<openssl-s_server(1)>
+check for consistency with
+TLS server (C<sslserver>) or TLS client use (C<sslclient>), respectively.
+By default, CMS signature validation, which can be done via L<openssl-cms(1)>,
+checks for consistency with S/MIME signing use (C<smimesign>).
While IETF RFC 5280 says that B<id-kp-serverAuth> and B<id-kp-clientAuth>
are only for WWW use, in practice they are used for all kinds of TLS clients
@@ -491,19 +496,20 @@
=item B<-verify_name> I<name>
-Use default verification policies like trust model and required certificate
-policies identified by I<name>.
+Use a set of verification parameters, also known as verification method,
+identified by I<name>. The currently predefined methods are named C<ssl_client>,
+C<ssl_server>, C<smime_sign> with alias C<pkcs7>, and C<default>.
+These mimic the combinations of purpose and trust settings used in SSL/(D)TLS,
+and CMS/PKCS7 (including S/MIME).
+
+The verification parameters include the trust model, various flags that can
+partly be set also via other command-line options, and the verification purpose,
+which in turn implies certificate key usage and extended key usage requirements.
+
The trust model determines which auxiliary trust or reject OIDs are applicable
to verifying the given certificate chain.
They can be given using the B<-addtrust> and B<-addreject> options
for L<openssl-x509(1)>.
-Supported policy names include: B<default>, B<pkcs7>, B<smime_sign>,
-B<ssl_client>, B<ssl_server>.
-These mimics the combinations of purpose and trust settings used in SSL, CMS
-and S/MIME.
-As of OpenSSL 1.1.0, the trust model is inferred from the purpose when not
-specified, so the B<-verify_name> options are functionally equivalent to the
-corresponding B<-purpose> settings.
=back
@@ -548,9 +554,8 @@
=head2 Certificate Extensions
-Options like B<-purpose> lead to checking the certificate extensions,
-which determine what the target certificate and intermediate CA certificates
-can be used for.
+Options like B<-purpose> and B<-verify_name> trigger the processing of specific
+certificate extensions, which determine what certificates can be used for.
=head3 Basic Constraints
@@ -574,87 +579,117 @@
=head3 Extended Key Usage
-The extKeyUsage (EKU) extension places additional restrictions on the
-certificate uses. If this extension is present (whether critical or not)
-the key can only be used for the purposes specified.
-
-A complete description of each check is given below. The comments about
+The extKeyUsage (EKU) extension places additional restrictions on
+certificate use. If this extension is present (whether critical or not)
+in an end-entity certficiate, the key is allowed only for the uses specified,
+while the special EKU B<anyExtendedKeyUsage> allows for all uses.
+
+Note that according to RFC 5280 section 4.2.1.12,
+the Extended Key Usage extension will appear only in end-entity certificates,
+and consequently the standard certification path validation described
+in its section 6 does not include EKU checks for CA certificates.
+The CA/Browser Forum requires for TLS server, S/MIME, and code signing use
+the presence of respective EKUs in subordinate CA certificates (while excluding
+them for root CA certificates), while taking over from RFC 5280
+the certificate validity concept and certificate path validation.
+
+For historic reasons, OpenSSL has its own way of interpreting and checking
+EKU extensions on CA certificates, which may change in the future.
+It does not require the presence of EKU extensions in CA certificates,
+but in case the verification purpose is
+C<sslclient>, C<nssslserver>, C<sslserver>, C<smimesign>, or C<smimeencrypt>,
+it checks that any present EKU extension (that does not contain
+B<anyExtendedKeyUsage>) contains the respective EKU as detailed below.
+Moreover, it does these checks even for trust anchor certificates.
+
+=head3 Checks Implied by Specific Predefined Policies
+
+A specific description of each check is given below. The comments about
basicConstraints and keyUsage and X.509v1 certificates above apply to B<all>
CA certificates.
-
=over 4
-=item B<SSL Client>
+=item B<(D)TLS Client> (C<sslclient>)
-The extended key usage extension must be absent or include the "web client
-authentication" OID. The keyUsage extension must be absent or it must have the
-digitalSignature bit set. The Netscape certificate type must be absent
-or it must have the SSL client bit set.
+Any given extended key usage extension must allow for C<clientAuth>
+("TLS WWW client authentication").
-=item B<SSL Client CA>
+For target certificates,
+the key usage must allow for C<digitalSignature> and/or C<keyAgreement>.
+The Netscape certificate type must be absent or have the SSL client bit set.
-The extended key usage extension must be absent or include the "web client
-authentication" OID.
-The Netscape certificate type must be absent or it must have the SSL CA bit set.
-This is used as a work around if the basicConstraints extension is absent.
+For all other certificates the normal CA checks apply. In addition,
+the Netscape certificate type must be absent or have the SSL CA bit set.
+This is used as a workaround if the basicConstraints extension is absent.
-=item B<SSL Server>
+=item B<(D)TLS Server> (C<sslserver>)
-The extended key usage extension must be absent or include the "web server
-authentication" and/or one of the SGC OIDs. The keyUsage extension must be
-absent or it
-must have the digitalSignature, the keyEncipherment set or both bits set.
-The Netscape certificate type must be absent or have the SSL server bit set.
+Any given extended key usage extension must allow for C<serverAuth>
+("TLS WWW server authentication") and/or include one of the SGC OIDs.
-=item B<SSL Server CA>
+For target certificates, the key usage must
+allow for C<digitalSignature>, C<keyEncipherment>, and/or C<keyAgreement>.
+The Netscape certificate type must be absent or have the SSL server bit set.
-The extended key usage extension must be absent or include the "web server
-authentication" and/or one of the SGC OIDs. The Netscape certificate type must
-be absent or the SSL CA bit must be set.
-This is used as a work around if the basicConstraints extension is absent.
+For all other certificates the normal CA checks apply. In addition,
+the Netscape certificate type must be absent or have the SSL CA bit set.
+This is used as a workaround if the basicConstraints extension is absent.
-=item B<Netscape SSL Server>
+=item B<Netscape SSL Server> (C<nssslserver>)
-For Netscape SSL clients to connect to an SSL server it must have the
-keyEncipherment bit set if the keyUsage extension is present. This isn't
+In addition to what has been described for B<sslserver>, for a Netscape
+SSL client to connect to an SSL server, its EE certficate must have the
+B<keyEncipherment> bit set if the keyUsage extension is present. This isn't
always valid because some cipher suites use the key for digital signing.
Otherwise it is the same as a normal SSL server.
-=item B<Common S/MIME Client Tests>
+=item B<Common S/MIME Checks>
-The extended key usage extension must be absent or include the "email
-protection" OID. The Netscape certificate type must be absent or should have the
-S/MIME bit set. If the S/MIME bit is not set in the Netscape certificate type
+Any given extended key usage extension must allow for C<emailProtection>.
+
+For target certificates,
+the Netscape certificate type must be absent or should have the S/MIME bit set.
+If the S/MIME bit is not set in the Netscape certificate type
then the SSL client bit is tolerated as an alternative but a warning is shown.
This is because some Verisign certificates don't set the S/MIME bit.
-=item B<S/MIME Signing>
+For all other certificates the normal CA checks apply. In addition,
+the Netscape certificate type must be absent or have the S/MIME CA bit set.
+This is used as a workaround if the basicConstraints extension is absent.
+
+=item B<S/MIME Signing> (C<smimesign>)
+
+In addition to the common S/MIME checks, for target certficiates
+the key usage must allow for C<digitalSignature> and/or B<nonRepudiation>.
+
+=item B<S/MIME Encryption> (C<smimeencrypt>)
+
+In addition to the common S/MIME checks, for target certficiates
+the key usage must allow for C<keyEncipherment>.
-In addition to the common S/MIME client tests the digitalSignature bit or
-the nonRepudiation bit must be set if the keyUsage extension is present.
+=item B<CRL Signing> (C<crlsign>)
-=item B<S/MIME Encryption>
+For target certificates, the key usage must allow for C<cRLSign>.
-In addition to the common S/MIME tests the keyEncipherment bit must be set
-if the keyUsage extension is present.
+For all other certifcates the normal CA checks apply.
+Except in this case the basicConstraints extension must be present.
-=item B<S/MIME CA>
+=item B<OCSP Helper> (C<ocsphelper>)
-The extended key usage extension must be absent or include the "email
-protection" OID. The Netscape certificate type must be absent or must have the
-S/MIME CA bit set.
-This is used as a work around if the basicConstraints extension is absent.
+For target certificates, no checks are performed at this stage,
+but special checks apply; see L<OCSP_basic_verify(3)>.
-=item B<CRL Signing>
+For all other certifcates the normal CA checks apply.
-The keyUsage extension must be absent or it must have the CRL signing bit
-set.
+=item B<Timestamp Signing> (C<timestampsign>)
-=item B<CRL Signing CA>
+For target certificates, if the key usage extension is present, it must include
+C<digitalSignature> and/or C<nonRepudiation> and must not include other bits.
+The EKU extension must be present and contain C<timeStamping> only.
+Moreover, it must be marked as critical.
-The normal CA tests apply. Except in this case the basicConstraints extension
-must be present.
+For all other certifcates the normal CA checks apply.
=back
@@ -671,6 +706,7 @@
=head1 SEE ALSO
L<X509_verify_cert(3)>,
+L<OCSP_basic_verify(3)>,
L<openssl-verify(1)>,
L<openssl-ocsp(1)>,
L<openssl-ts(1)>,
diff --git a/crypto/openssl/doc/man1/openssl.pod b/crypto/openssl/doc/man1/openssl.pod
--- a/crypto/openssl/doc/man1/openssl.pod
+++ b/crypto/openssl/doc/man1/openssl.pod
@@ -653,111 +653,22 @@
=head1 ENVIRONMENT
-The OpenSSL library can be take some configuration parameters from the
-environment. Some of these variables are listed below. For information
-about specific commands, see L<openssl-engine(1)>,
-L<openssl-rehash(1)>, and L<tsget(1)>.
-
-For information about the use of environment variables in configuration,
-see L<config(5)/ENVIRONMENT>.
-
-For information about querying or specifying CPU architecture flags, see
-L<OPENSSL_ia32cap(3)>, and L<OPENSSL_s390xcap(3)>.
+The OpenSSL libraries can take some configuration parameters from the
+environment.
For information about all environment variables used by the OpenSSL libraries,
+such as B<OPENSSL_CONF>, B<OPENSSL_MODULES>, and B<OPENSSL_TRACE>,
see L<openssl-env(7)>.
-=over 4
-
-=item B<OPENSSL_TRACE=>I<name>[,...]
-
-Enable tracing output of OpenSSL library, by name.
-This output will only make sense if you know OpenSSL internals well.
-Also, it might not give you any output at all, depending on how
-OpenSSL was built.
-
-The value is a comma separated list of names, with the following
-available:
-
-=over 4
-
-=item B<TRACE>
-
-Traces the OpenSSL trace API itself.
-
-=item B<INIT>
-
-Traces OpenSSL library initialization and cleanup.
-
-=item B<TLS>
-
-Traces the TLS/SSL protocol.
-
-=item B<TLS_CIPHER>
-
-Traces the ciphers used by the TLS/SSL protocol.
-
-=item B<CONF>
-
-Show details about provider and engine configuration.
-
-=item B<ENGINE_TABLE>
-
-The function that is used by RSA, DSA (etc) code to select registered
-ENGINEs, cache defaults and functional references (etc), will generate
-debugging summaries.
-
-=item B<ENGINE_REF_COUNT>
-
-Reference counts in the ENGINE structure will be monitored with a line
-of generated for each change.
-
-=item B<PKCS5V2>
-
-Traces PKCS#5 v2 key generation.
-
-=item B<PKCS12_KEYGEN>
-
-Traces PKCS#12 key generation.
-
-=item B<PKCS12_DECRYPT>
-
-Traces PKCS#12 decryption.
-
-=item B<X509V3_POLICY>
-
-Generates the complete policy tree at various points during X.509 v3
-policy evaluation.
-
-=item B<BN_CTX>
-
-Traces BIGNUM context operations.
-
-=item B<CMP>
-
-Traces CMP client and server activity.
-
-=item B<STORE>
-
-Traces STORE operations.
-
-=item B<DECODER>
-
-Traces decoder operations.
-
-=item B<ENCODER>
-
-Traces encoder operations.
-
-=item B<REF_COUNT>
-
-Traces decrementing certain ASN.1 structure references.
+For information about the use of environment variables in configuration,
+see L<config(5)/ENVIRONMENT>.
-=back
+For information about specific commands, see L<openssl-engine(1)>,
+L<openssl-rehash(1)>, and L<tsget(1)>.
-=back
+For information about querying or specifying CPU architecture flags, see
+L<OPENSSL_ia32cap(3)>, and L<OPENSSL_s390xcap(3)>.
-=head1 SEE ALSO
L<openssl-asn1parse(1)>,
L<openssl-ca(1)>,
diff --git a/crypto/openssl/doc/man3/ASN1_TIME_set.pod b/crypto/openssl/doc/man3/ASN1_TIME_set.pod
--- a/crypto/openssl/doc/man3/ASN1_TIME_set.pod
+++ b/crypto/openssl/doc/man3/ASN1_TIME_set.pod
@@ -102,8 +102,8 @@
The ASN1_TIME_print(), ASN1_UTCTIME_print() and ASN1_GENERALIZEDTIME_print()
functions print the time structure I<s> to BIO I<b> in human readable
-format. It will be of the format MMM DD HH:MM:SS YYYY [GMT], for example
-"Feb 3 00:55:52 2015 GMT", which does not include a newline.
+format. It will be of the format MMM DD HH:MM:SS[.s*] YYYY GMT, for example
+"Feb E<32>3 00:55:52 2015 GMT", which does not include a newline.
If the time structure has invalid format it prints out "Bad time value" and
returns an error. The output for generalized time may include a fractional part
following the second.
@@ -179,6 +179,10 @@
specific time format. The functions starting with B<ASN1_TIME> will operate on
either format.
+Users familiar with RFC822 should note that when specifying the flag
+B<ASN1_DTFLGS_RFC822> the year will be formatted as documented above,
+i.e., using 4 digits, not 2 as specified in RFC822.
+
=head1 BUGS
ASN1_TIME_print(), ASN1_UTCTIME_print() and ASN1_GENERALIZEDTIME_print() do
@@ -272,7 +276,7 @@
=head1 COPYRIGHT
-Copyright 2015-2021 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2015-2025 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/doc/man3/ASN1_aux_cb.pod b/crypto/openssl/doc/man3/ASN1_aux_cb.pod
--- a/crypto/openssl/doc/man3/ASN1_aux_cb.pod
+++ b/crypto/openssl/doc/man3/ASN1_aux_cb.pod
@@ -87,7 +87,7 @@
=item I<asn1_cb>
A callback that will be invoked at various points during the processing of
-the the B<ASN1_VALLUE>. See below for further details.
+the B<ASN1_VALUE>. See below for further details.
=item I<enc_offset>
@@ -97,7 +97,7 @@
=item I<asn1_const_cb>
A callback that will be invoked at various points during the processing of
-the the B<ASN1_VALLUE>. This is used in preference to the I<asn1_cb> callback if
+the B<ASN1_VALUE>. This is used in preference to the I<asn1_cb> callback if
the B<ASN1_AFLG_CONST_CB> flag is set. See below for further details.
=back
@@ -274,7 +274,7 @@
=head1 COPYRIGHT
-Copyright 2021-2023 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2021-2025 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/doc/man3/BIO_s_accept.pod b/crypto/openssl/doc/man3/BIO_s_accept.pod
--- a/crypto/openssl/doc/man3/BIO_s_accept.pod
+++ b/crypto/openssl/doc/man3/BIO_s_accept.pod
@@ -169,16 +169,16 @@
BIO_do_accept(),
BIO_set_accept_name(), BIO_set_accept_port(), BIO_set_nbio_accept(),
BIO_set_accept_bios(), BIO_set_accept_ip_family(), and BIO_set_bind_mode()
-return 1 for success and <=0 for failure.
+return 1 for success and <= 0 for failure.
BIO_get_accept_name() returns the accept name or NULL on error.
BIO_get_peer_name() returns the peer name or NULL on error.
BIO_get_accept_port() returns the accept port as a string or NULL on error.
BIO_get_peer_port() returns the peer port as a string or NULL on error.
-BIO_get_accept_ip_family() returns the IP family or <=0 on error.
+BIO_get_accept_ip_family() returns the IP family or <= 0 on error.
-BIO_get_bind_mode() returns the set of B<BIO_BIND> flags, or <=0 on failure.
+BIO_get_bind_mode() returns the set of B<BIO_BIND> flags, or <= 0 on failure.
BIO_new_accept() returns a BIO or NULL on error.
diff --git a/crypto/openssl/doc/man3/BIO_s_connect.pod b/crypto/openssl/doc/man3/BIO_s_connect.pod
--- a/crypto/openssl/doc/man3/BIO_s_connect.pod
+++ b/crypto/openssl/doc/man3/BIO_s_connect.pod
@@ -59,7 +59,7 @@
BIO_set_conn_hostname() uses the string B<name> to set the hostname.
The hostname can be an IP address; if the address is an IPv6 one, it
-must be enclosed with brackets C<[> and C<]>.
+must be enclosed in brackets C<[> and C<]>.
The hostname can also include the port in the form hostname:port;
see L<BIO_parse_hostserv(3)> and BIO_set_conn_port() for details.
diff --git a/crypto/openssl/doc/man3/ECDSA_sign.pod b/crypto/openssl/doc/man3/ECDSA_sign.pod
--- a/crypto/openssl/doc/man3/ECDSA_sign.pod
+++ b/crypto/openssl/doc/man3/ECDSA_sign.pod
@@ -52,7 +52,7 @@
ECDSA_sign() computes a digital signature of the I<dgstlen> bytes hash value
I<dgst> using the private EC key I<eckey>. The DER encoded signatures is
-stored in I<sig> and its length is returned in I<sig_len>. Note: I<sig> must
+stored in I<sig> and its length is returned in I<siglen>. Note: I<sig> must
point to ECDSA_size(eckey) bytes of memory. The parameter I<type> is currently
ignored. ECDSA_sign() is wrapper function for ECDSA_sign_ex() with I<kinv>
and I<rp> set to NULL.
@@ -82,7 +82,7 @@
ECDSA_sign_ex() computes a digital signature of the I<dgstlen> bytes hash value
I<dgst> using the private EC key I<eckey> and the optional pre-computed values
I<kinv> and I<rp>. The DER encoded signature is stored in I<sig> and its
-length is returned in I<sig_len>. Note: I<sig> must point to ECDSA_size(eckey)
+length is returned in I<siglen>. Note: I<sig> must point to ECDSA_size(eckey)
bytes of memory. The parameter I<type> is ignored.
ECDSA_do_sign_ex() is similar to ECDSA_sign_ex() except the signature is
diff --git a/crypto/openssl/doc/man3/EVP_EncryptInit.pod b/crypto/openssl/doc/man3/EVP_EncryptInit.pod
--- a/crypto/openssl/doc/man3/EVP_EncryptInit.pod
+++ b/crypto/openssl/doc/man3/EVP_EncryptInit.pod
@@ -1284,6 +1284,15 @@
the authentication operation has failed and any output data B<MUST NOT> be used
as it is corrupted.
+Please note that the number of authenticated bytes returned by
+EVP_CipherUpdate() depends on the cipher used. Stream ciphers, such as ChaCha20
+or ciphers in GCM mode, can handle 1 byte at a time, resulting in an effective
+"block" size of 1. Conversely, ciphers in OCB mode must process data one block
+at a time, and the block size is returned.
+
+Regardless of the returned size, it is safe to pass unpadded data to an
+EVP_CipherUpdate() call in a single operation.
+
=head2 GCM and OCB Modes
The following I<ctrl>s are supported in GCM and OCB modes.
@@ -1319,10 +1328,9 @@
For OCB, this call is valid when decrypting data to set the expected tag,
and when encrypting to set the desired tag length.
-In OCB mode, calling this when encrypting with C<tag> set to C<NULL> sets the
-tag length. The tag length can only be set before specifying an IV. If this is
-not called prior to setting the IV during encryption, then a default tag length
-is used.
+In OCB mode, calling this with C<tag> set to C<NULL> sets the tag length.
+The tag length can only be set before specifying an IV. If this is not called
+prior to setting the IV, then a default tag length is used.
For OCB AES, the default tag length is 16 (i.e. 128 bits). It is also the
maximum tag length for OCB.
diff --git a/crypto/openssl/doc/man3/EVP_PKEY_decapsulate.pod b/crypto/openssl/doc/man3/EVP_PKEY_decapsulate.pod
--- a/crypto/openssl/doc/man3/EVP_PKEY_decapsulate.pod
+++ b/crypto/openssl/doc/man3/EVP_PKEY_decapsulate.pod
@@ -25,10 +25,13 @@
The EVP_PKEY_decapsulate() function performs a private key decapsulation
operation using I<ctx>. The data to be decapsulated is specified using the
I<wrapped> and I<wrappedlen> parameters.
-If I<unwrapped> is NULL then the maximum size of the output secret buffer
+If I<unwrapped> is NULL then the size of the output secret buffer
is written to I<*unwrappedlen>. If I<unwrapped> is not NULL and the
call is successful then the decapsulated secret data is written to I<unwrapped>
-and the amount of data written to I<*unwrappedlen>.
+and the amount of data written to I<*unwrappedlen>. Note that, if I<unwrappedlen>
+is not NULL in this call, the value it points to must be initialised to the length of
+I<unwrapped>, so that the call can validate it is of sufficient size to hold the
+result of the operation.
=head1 NOTES
@@ -57,7 +60,7 @@
unsigned char *secret = NULL;;
ctx = EVP_PKEY_CTX_new_from_pkey(libctx, rsa_priv_key, NULL);
- if (ctx = NULL)
+ if (ctx == NULL)
/* Error */
if (EVP_PKEY_decapsulate_init(ctx, NULL) <= 0)
/* Error */
diff --git a/crypto/openssl/doc/man3/EVP_PKEY_encapsulate.pod b/crypto/openssl/doc/man3/EVP_PKEY_encapsulate.pod
--- a/crypto/openssl/doc/man3/EVP_PKEY_encapsulate.pod
+++ b/crypto/openssl/doc/man3/EVP_PKEY_encapsulate.pod
@@ -35,7 +35,10 @@
If I<wrappedkey> is not NULL and the call is successful then the
internally generated key is written to I<genkey> and its size is written to
I<*genkeylen>. The encapsulated version of the generated key is written to
-I<wrappedkey> and its size is written to I<*wrappedkeylen>.
+I<wrappedkey> and its size is written to I<*wrappedkeylen>. Note that if
+I<wrappedlen> is not NULL, then the value it points to must initially hold the size of
+the I<unwrapped> buffer so that its size can be validated by the call, ensuring
+it is large enough to hold the result written to I<wrapped>.
=head1 NOTES
@@ -63,7 +66,7 @@
unsigned char *out = NULL, *secret = NULL;
ctx = EVP_PKEY_CTX_new_from_pkey(libctx, rsa_pub_key, NULL);
- if (ctx = NULL)
+ if (ctx == NULL)
/* Error */
if (EVP_PKEY_encapsulate_init(ctx, NULL) <= 0)
/* Error */
diff --git a/crypto/openssl/doc/man3/OSSL_CMP_CTX_new.pod b/crypto/openssl/doc/man3/OSSL_CMP_CTX_new.pod
--- a/crypto/openssl/doc/man3/OSSL_CMP_CTX_new.pod
+++ b/crypto/openssl/doc/man3/OSSL_CMP_CTX_new.pod
@@ -355,8 +355,10 @@
the environment variable C<http_proxy> if set, else C<HTTP_PROXY>.
Otherwise defaults to the value of C<https_proxy> if set, else C<HTTPS_PROXY>.
An empty proxy string specifies not to use a proxy.
-Else the format is C<[http[s]://]address[:port][/path]>,
-where any path given is ignored.
+Otherwise the format is
+C<[http[s]://][userinfo@]host[:port][/path][?query][#fragment]>,
+where any given userinfo, path, query, and fragment is ignored.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
The default port number is 80, or 443 in case C<https:> is given.
OSSL_CMP_CTX_set1_no_proxy() sets the list of server hostnames not to use
diff --git a/crypto/openssl/doc/man3/OSSL_CMP_validate_msg.pod b/crypto/openssl/doc/man3/OSSL_CMP_validate_msg.pod
--- a/crypto/openssl/doc/man3/OSSL_CMP_validate_msg.pod
+++ b/crypto/openssl/doc/man3/OSSL_CMP_validate_msg.pod
@@ -44,7 +44,7 @@
as a trust anchor for the path verification of an 'acceptable' cert if it can be
used also to validate the issued certificate returned in the IP message. This is
according to TS 33.310 [Network Domain Security (NDS); Authentication Framework
-(AF)] document specified by the The 3rd Generation Partnership Project (3GPP).
+(AF)] document specified by The 3rd Generation Partnership Project (3GPP).
Note that using this option is dangerous as the certificate obtained this way
has not been authenticated (at least not at CMP level).
Taking it over as a trust anchor implements trust-on-first-use (TOFU).
@@ -77,7 +77,7 @@
=head1 COPYRIGHT
-Copyright 2007-2024 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2007-2025 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/doc/man3/OSSL_HTTP_parse_url.pod b/crypto/openssl/doc/man3/OSSL_HTTP_parse_url.pod
--- a/crypto/openssl/doc/man3/OSSL_HTTP_parse_url.pod
+++ b/crypto/openssl/doc/man3/OSSL_HTTP_parse_url.pod
@@ -42,20 +42,25 @@
environment variable, or from C<HTTPS_PROXY> if I<use_ssl> is nonzero.
If I<no_proxy> is NULL, take any default exclusion value from the C<no_proxy>
environment variable, or else from C<NO_PROXY>.
-Return the determined proxy hostname unless the exclusion contains I<server>.
+Return the determined proxy host unless the exclusion value,
+which is a list of proxy hosts separated by C<,> and/or whitespace,
+contains I<server>.
Otherwise return NULL.
+When I<server> is a string delimited by C<[> and C<]>, which are used for IPv6
+addresses, the enclosing C<[> and C<]> are stripped prior to comparison.
OSSL_parse_url() parses its input string I<url> as a URL of the form
C<[scheme://][userinfo@]host[:port][/path][?query][#fragment]> and splits it up
into scheme, userinfo, host, port, path, query, and fragment components.
The host (or server) component may be a DNS name or an IP address
-where IPv6 addresses should be enclosed in square brackets C<[> and C<]>.
+where IPv6 addresses must be enclosed in square brackets C<[> and C<]>.
The port component is optional and defaults to C<0>.
If given, it must be in decimal form. If the I<pport_num> argument is not NULL
the integer value of the port number is assigned to I<*pport_num> on success.
The path component is also optional and defaults to C</>.
Each non-NULL result pointer argument I<pscheme>, I<puser>, I<phost>, I<pport>,
I<ppath>, I<pquery>, and I<pfrag>, is assigned the respective url component.
+Any IPv6 address in I<*phost> is enclosed in C<[> and C<]>.
On success, they are guaranteed to contain non-NULL string pointers, else NULL.
It is the responsibility of the caller to free them using L<OPENSSL_free(3)>.
If I<pquery> is NULL, any given query component is handled as part of the path.
@@ -70,7 +75,7 @@
The port component is optional and defaults to C<443> if the scheme is C<https>,
else C<80>.
Note that relative paths must be given with a leading C</>,
-otherwise the first path element is interpreted as the hostname.
+otherwise the first path element is interpreted as the host.
Calling the deprecated function OCSP_parse_url(url, host, port, path, ssl)
is equivalent to
diff --git a/crypto/openssl/doc/man3/OSSL_HTTP_transfer.pod b/crypto/openssl/doc/man3/OSSL_HTTP_transfer.pod
--- a/crypto/openssl/doc/man3/OSSL_HTTP_transfer.pod
+++ b/crypto/openssl/doc/man3/OSSL_HTTP_transfer.pod
@@ -77,12 +77,14 @@
if set, else C<HTTP_PROXY>.
If I<use_ssl> != 0 it defaults to C<https_proxy> if set, else C<HTTPS_PROXY>.
An empty proxy string C<""> forbids using a proxy.
-Else the format is
+Otherwise, the format is
C<[http[s]://][userinfo@]host[:port][/path][?query][#fragment]>,
where any userinfo, path, query, and fragment given is ignored.
+If the host string is an IPv6 address, it must be enclosed in C<[> and C<]>.
The default proxy port number is 80, or 443 in case "https:" is given.
The HTTP client functions connect via the given proxy unless the I<server>
-is found in the optional list I<no_proxy> of proxy hostnames (if not NULL;
+is found in the optional list I<no_proxy> of proxy hostnames or IP addresses
+separated by C<,> and/or whitespace (if not NULL;
default is the environment variable C<no_proxy> if set, else C<NO_PROXY>).
Proxying plain HTTP is supported directly,
while using a proxy for HTTPS connections requires a suitable callback function
diff --git a/crypto/openssl/doc/man3/OSSL_PARAM.pod b/crypto/openssl/doc/man3/OSSL_PARAM.pod
--- a/crypto/openssl/doc/man3/OSSL_PARAM.pod
+++ b/crypto/openssl/doc/man3/OSSL_PARAM.pod
@@ -11,7 +11,7 @@
typedef struct ossl_param_st OSSL_PARAM;
struct ossl_param_st {
const char *key; /* the name of the parameter */
- unsigned char data_type; /* declare what kind of content is in data */
+ unsigned int data_type; /* declare what kind of content is in data */
void *data; /* value being passed in or out */
size_t data_size; /* data size */
size_t return_size; /* returned size */
diff --git a/crypto/openssl/doc/man3/OSSL_trace_enabled.pod b/crypto/openssl/doc/man3/OSSL_trace_enabled.pod
--- a/crypto/openssl/doc/man3/OSSL_trace_enabled.pod
+++ b/crypto/openssl/doc/man3/OSSL_trace_enabled.pod
@@ -88,9 +88,10 @@
OSSL_trace_enabled() can be used to check if tracing for the given
I<category> is enabled.
-OSSL_trace_begin() is used to starts a tracing section, and get the
-channel for the given I<category> in form of a BIO.
+OSSL_trace_begin() is used to start a tracing section,
+and get the channel for the given I<category> in form of a BIO.
This BIO can only be used for output.
+The pointer returned is NULL if the category is invalid or not enabled.
OSSL_trace_end() is used to end a tracing section.
@@ -187,6 +188,9 @@
=head1 NOTES
+It is not needed to guard trace output function calls like
+I<OSSL_TRACE(category, ...)> by I<OSSL_TRACE_ENABLED(category)>.
+
If producing the trace output requires carrying out auxiliary calculations,
this auxiliary code should be placed inside a conditional block which is
executed only if the trace category is enabled.
diff --git a/crypto/openssl/doc/man3/SSL_CTX_new.pod b/crypto/openssl/doc/man3/SSL_CTX_new.pod
--- a/crypto/openssl/doc/man3/SSL_CTX_new.pod
+++ b/crypto/openssl/doc/man3/SSL_CTX_new.pod
@@ -104,10 +104,12 @@
This must be explicitly requested, typically using L<SSL_CTX_set_verify(3)>.
For verifying peer certificates many options can be set using various functions
such as L<SSL_CTX_load_verify_locations(3)> and L<SSL_CTX_set1_param(3)>.
-The L<X509_VERIFY_PARAM_set_purpose(3)> function can be used, also in conjunction
-with L<SSL_CTX_get0_param(3)>, to set the intended purpose of the session.
-The default is B<X509_PURPOSE_SSL_SERVER> on the client side
+
+The SSL/(D)TLS implementation uses the L<X509_STORE_CTX_set_default(3)>
+function to prepare checks for B<X509_PURPOSE_SSL_SERVER> on the client side
and B<X509_PURPOSE_SSL_CLIENT> on the server side.
+The L<X509_VERIFY_PARAM_set_purpose(3)> function can be used, also in conjunction
+with L<SSL_CTX_get0_param(3)>, to override the default purpose of the session.
The SSL_CTX object uses I<method> as the connection method.
Three method variants are available: a generic method (for either client or
@@ -228,7 +230,7 @@
=head1 SEE ALSO
-L<SSL_CTX_set_options(3)>, L<SSL_CTX_free(3)>,
+L<SSL_CTX_set_options(3)>, L<SSL_CTX_free(3)>, L<X509_STORE_CTX_set_default(3)>,
SSL_CTX_set_verify(3), L<SSL_CTX_set1_param(3)>, L<SSL_CTX_get0_param(3)>,
L<SSL_connect(3)>, L<SSL_accept(3)>,
L<SSL_CTX_set_min_proto_version(3)>, L<ssl(7)>, L<SSL_set_connect_state(3)>
diff --git a/crypto/openssl/doc/man3/SSL_get_shared_sigalgs.pod b/crypto/openssl/doc/man3/SSL_get_shared_sigalgs.pod
--- a/crypto/openssl/doc/man3/SSL_get_shared_sigalgs.pod
+++ b/crypto/openssl/doc/man3/SSL_get_shared_sigalgs.pod
@@ -64,7 +64,7 @@
The raw values correspond to the on the wire form as defined by RFC5246 et al.
The NIDs are OpenSSL equivalents. For example if the peer sent sha256(4) and
rsa(1) then B<*rhash> would be 4, B<*rsign> 1, B<*phash> NID_sha256, B<*psig>
-NID_rsaEncryption and B<*psighash> NID_sha256WithRSAEncryption.
+NID_rsaEncryption and B<*psignhash> NID_sha256WithRSAEncryption.
If a signature algorithm is not recognised the corresponding NIDs
will be set to B<NID_undef>. This may be because the value is not supported,
diff --git a/crypto/openssl/doc/man3/SSL_set_bio.pod b/crypto/openssl/doc/man3/SSL_set_bio.pod
--- a/crypto/openssl/doc/man3/SSL_set_bio.pod
+++ b/crypto/openssl/doc/man3/SSL_set_bio.pod
@@ -23,6 +23,9 @@
call to L<BIO_free_all(3)> (this includes the case where the B<rbio> is set to
the same value as previously).
+If using a custom BIO, B<rbio> must implement either
+L<BIO_meth_set_read_ex(3)> or L<BIO_meth_set_read(3)>.
+
SSL_set0_wbio() works in the same as SSL_set0_rbio() except that it connects
the BIO B<wbio> for the write operations of the B<ssl> object. Note that if the
rbio and wbio are the same then SSL_set0_rbio() and SSL_set0_wbio() each take
@@ -30,6 +33,12 @@
number of references available using L<BIO_up_ref(3)> before calling the set0
functions.
+If using a custom BIO, B<wbio> must implement
+L<BIO_meth_set_write_ex(3)> or L<BIO_meth_set_write(3)>. It additionally must
+implement L<BIO_flush(3)> using B<BIO_CTRL_FLUSH> and L<BIO_meth_set_ctrl(3)>.
+If flushing is unnecessary with B<wbio>, L<BIO_flush(3)> should return one and
+do nothing.
+
SSL_set_bio() is similar to SSL_set0_rbio() and SSL_set0_wbio() except
that it connects both the B<rbio> and the B<wbio> at the same time, and
transfers the ownership of B<rbio> and B<wbio> to B<ssl> according to
diff --git a/crypto/openssl/doc/man3/X509V3_set_ctx.pod b/crypto/openssl/doc/man3/X509V3_set_ctx.pod
--- a/crypto/openssl/doc/man3/X509V3_set_ctx.pod
+++ b/crypto/openssl/doc/man3/X509V3_set_ctx.pod
@@ -42,8 +42,7 @@
=head1 RETURN VALUES
-X509V3_set_ctx() and X509V3_set_issuer_pkey()
-return 1 on success and 0 on error.
+X509V3_set_issuer_pkey() returns 1 on success and 0 on error.
=head1 SEE ALSO
@@ -57,7 +56,7 @@
=head1 COPYRIGHT
-Copyright 2015-2021 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2015-2025 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/doc/man3/X509_STORE_CTX_new.pod b/crypto/openssl/doc/man3/X509_STORE_CTX_new.pod
--- a/crypto/openssl/doc/man3/X509_STORE_CTX_new.pod
+++ b/crypto/openssl/doc/man3/X509_STORE_CTX_new.pod
@@ -74,6 +74,12 @@
is no longer valid.
If I<ctx> is NULL nothing is done.
+X509_STORE_CTX_init() sets up I<ctx> for a subsequent verification operation.
+
+X509_STORE_CTX_init() initializes the internal state and resources of the
+given I<ctx>. Among others, it sets the verification parameters associcated
+with the method name C<default>, which includes the C<any> purpose,
+and takes over callback function pointers from I<trust_store> (unless NULL).
It must be called before each call to L<X509_verify_cert(3)> or
L<X509_STORE_CTX_verify(3)>, i.e., a context is only good for one verification.
If you want to verify a further certificate or chain with the same I<ctx>
@@ -144,12 +150,13 @@
Ownership of the chain is transferred to I<ctx>,
and so it should not be free'd by the caller.
-X509_STORE_CTX_set_default() looks up and sets the default verification
-method to I<name>. This uses the function X509_VERIFY_PARAM_lookup() to
-find an appropriate set of parameters from the purpose identifier I<name>.
-Currently defined purposes are C<sslclient>, C<sslserver>, C<nssslserver>,
-C<smimesign>, C<smimeencrypt>, C<crlsign>, C<ocsphelper>, C<timestampsign>,
-and C<any>.
+X509_STORE_CTX_set_default() looks up and sets the default verification method.
+This uses the function X509_VERIFY_PARAM_lookup() to find
+the set of parameters associated with the given verification method I<name>.
+Among others, the parameters determine the trust model and verification purpose.
+More detail, including the list of currently predefined methods,
+is described for the B<-verify_name> command-line option
+in L<openssl-verification-options(1)/Verification Options>.
X509_STORE_CTX_set_verify() provides the capability for overriding the default
verify function. This function is responsible for verifying chain signatures and
diff --git a/crypto/openssl/doc/man3/X509_add_cert.pod b/crypto/openssl/doc/man3/X509_add_cert.pod
--- a/crypto/openssl/doc/man3/X509_add_cert.pod
+++ b/crypto/openssl/doc/man3/X509_add_cert.pod
@@ -16,6 +16,7 @@
=head1 DESCRIPTION
X509_add_cert() adds a certificate I<cert> to the given list I<sk>.
+It is an error for the I<cert> argument to be NULL.
X509_add_certs() adds a list of certificate I<certs> to the given list I<sk>.
The I<certs> argument may be NULL, which implies no effect.
@@ -66,7 +67,7 @@
=head1 COPYRIGHT
-Copyright 2019-2023 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2019-2025 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/doc/man3/X509_load_http.pod b/crypto/openssl/doc/man3/X509_load_http.pod
--- a/crypto/openssl/doc/man3/X509_load_http.pod
+++ b/crypto/openssl/doc/man3/X509_load_http.pod
@@ -27,6 +27,9 @@
X509_load_http() and X509_CRL_load_http() loads a certificate or a CRL,
respectively, in ASN.1 format using HTTP from the given B<url>.
+Maximum size of the HTTP response is 100 kB for certificates and 32 MB for CRLs
+and hard coded in the functions.
+
If B<bio> is given and B<rbio> is NULL then this BIO is used instead of an
internal one for connecting, writing the request, and reading the response.
If both B<bio> and B<rbio> are given (which may be memory BIOs, for instance)
diff --git a/crypto/openssl/doc/man7/EVP_KDF-HKDF.pod b/crypto/openssl/doc/man7/EVP_KDF-HKDF.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-HKDF.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-HKDF.pod
@@ -15,6 +15,8 @@
"expands" the key K into several additional pseudorandom keys (the output
of the KDF).
+The output is considered to be keying material.
+
=head2 Identity
"HKDF" is the name for this implementation; it
diff --git a/crypto/openssl/doc/man7/EVP_KDF-KB.pod b/crypto/openssl/doc/man7/EVP_KDF-KB.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-KB.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-KB.pod
@@ -10,6 +10,8 @@
(KBKDF). KBKDF derives a key from repeated application of a keyed MAC to an
input secret (and other optional values).
+The output is considered to be keying material.
+
=head2 Identity
"KBKDF" is the name for this implementation; it can be used with the
diff --git a/crypto/openssl/doc/man7/EVP_KDF-PBKDF2.pod b/crypto/openssl/doc/man7/EVP_KDF-PBKDF2.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-PBKDF2.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-PBKDF2.pod
@@ -13,6 +13,8 @@
derivation function, as described in SP800-132; it derives a key from a password
using a salt and iteration count.
+The output is considered to be a cryptographic key.
+
=head2 Identity
"PBKDF2" is the name for this implementation; it
diff --git a/crypto/openssl/doc/man7/EVP_KDF-SS.pod b/crypto/openssl/doc/man7/EVP_KDF-SS.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-SS.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-SS.pod
@@ -11,6 +11,8 @@
during the execution of a key establishment scheme) and fixedinfo.
SSKDF is also informally referred to as 'Concat KDF'.
+The output is considered to be keying material.
+
=head2 Auxiliary function
The implementation uses a selectable auxiliary function H, which can be one of:
diff --git a/crypto/openssl/doc/man7/EVP_KDF-SSHKDF.pod b/crypto/openssl/doc/man7/EVP_KDF-SSHKDF.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-SSHKDF.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-SSHKDF.pod
@@ -15,6 +15,8 @@
(for example SHA256), the Initial Key, the Exchange Hash, the Session ID,
and the derivation key type.
+The output is considered to be keying material.
+
=head2 Identity
"SSHKDF" is the name for this implementation; it
diff --git a/crypto/openssl/doc/man7/EVP_KDF-TLS13_KDF.pod b/crypto/openssl/doc/man7/EVP_KDF-TLS13_KDF.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-TLS13_KDF.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-TLS13_KDF.pod
@@ -12,6 +12,8 @@
The EVP_KDF-TLS13_KDF algorithm implements the HKDF key derivation function
as used by TLS 1.3.
+The output is considered to be keying material.
+
=head2 Identity
"TLS13-KDF" is the name for this implementation; it
diff --git a/crypto/openssl/doc/man7/EVP_KDF-TLS1_PRF.pod b/crypto/openssl/doc/man7/EVP_KDF-TLS1_PRF.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-TLS1_PRF.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-TLS1_PRF.pod
@@ -11,6 +11,8 @@
The EVP_KDF-TLS1_PRF algorithm implements the PRF used by TLS versions up to
and including TLS 1.2.
+The output is considered to be keying material.
+
=head2 Identity
"TLS1-PRF" is the name for this implementation; it
diff --git a/crypto/openssl/doc/man7/EVP_KDF-X942-ASN1.pod b/crypto/openssl/doc/man7/EVP_KDF-X942-ASN1.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-X942-ASN1.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-X942-ASN1.pod
@@ -13,6 +13,8 @@
"partyv-info", "supp-pubinfo" and "supp-privinfo".
This kdf is used by Cryptographic Message Syntax (CMS).
+The output is considered to be keying material.
+
=head2 Identity
"X942KDF-ASN1" or "X942KDF" is the name for this implementation; it
diff --git a/crypto/openssl/doc/man7/EVP_KDF-X963.pod b/crypto/openssl/doc/man7/EVP_KDF-X963.pod
--- a/crypto/openssl/doc/man7/EVP_KDF-X963.pod
+++ b/crypto/openssl/doc/man7/EVP_KDF-X963.pod
@@ -10,6 +10,8 @@
X963KDF is used by Cryptographic Message Syntax (CMS) for EC KeyAgreement, to
derive a key using input such as a shared secret key and shared info.
+The output is considered to be keying material.
+
=head2 Identity
"X963KDF" is the name for this implementation; it
diff --git a/crypto/openssl/doc/man7/EVP_SIGNATURE-DSA.pod b/crypto/openssl/doc/man7/EVP_SIGNATURE-DSA.pod
--- a/crypto/openssl/doc/man7/EVP_SIGNATURE-DSA.pod
+++ b/crypto/openssl/doc/man7/EVP_SIGNATURE-DSA.pod
@@ -7,7 +7,9 @@
=head1 DESCRIPTION
-Support for computing DSA signatures.
+Support for computing DSA signatures. The signature produced with
+L<EVP_PKEY_sign(3)> is DER encoded ASN.1 in the form described in
+RFC 3279, section 2.2.2.
See L<EVP_PKEY-DSA(7)> for information related to DSA keys.
=head2 Signature Parameters
diff --git a/crypto/openssl/doc/man7/openssl-env.pod b/crypto/openssl/doc/man7/openssl-env.pod
--- a/crypto/openssl/doc/man7/openssl-env.pod
+++ b/crypto/openssl/doc/man7/openssl-env.pod
@@ -51,6 +51,99 @@
Specifies the directory from which cryptographic providers are loaded.
Equivalently, the generic B<-provider-path> command-line option may be used.
+=item B<OPENSSL_TRACE>
+
+By default the OpenSSL trace feature is disabled statically.
+To enable it, OpenSSL must be built with tracing support,
+which may be configured like this: C<./config enable-trace>
+
+Unless OpenSSL tracing support is generally disabled,
+enable trace output of specific parts of OpenSSL libraries, by name.
+This output usually makes sense only if you know OpenSSL internals well.
+
+The value of this environment varialble is a comma-separated list of names,
+with the following available:
+
+=over 4
+
+=item B<TRACE>
+
+Traces the OpenSSL trace API itself.
+
+=item B<INIT>
+
+Traces OpenSSL library initialization and cleanup.
+
+=item B<TLS>
+
+Traces the TLS/SSL protocol.
+
+=item B<TLS_CIPHER>
+
+Traces the ciphers used by the TLS/SSL protocol.
+
+=item B<CONF>
+
+Show details about provider and engine configuration.
+
+=item B<ENGINE_TABLE>
+
+The function that is used by RSA, DSA (etc) code to select registered
+ENGINEs, cache defaults and functional references (etc), will generate
+debugging summaries.
+
+=item B<ENGINE_REF_COUNT>
+
+Reference counts in the ENGINE structure will be monitored with a line
+of generated for each change.
+
+=item B<PKCS5V2>
+
+Traces PKCS#5 v2 key generation.
+
+=item B<PKCS12_KEYGEN>
+
+Traces PKCS#12 key generation.
+
+=item B<PKCS12_DECRYPT>
+
+Traces PKCS#12 decryption.
+
+=item B<X509V3_POLICY>
+
+Generates the complete policy tree at various points during X.509 v3
+policy evaluation.
+
+=item B<BN_CTX>
+
+Traces BIGNUM context operations.
+
+=item B<CMP>
+
+Traces CMP client and server activity.
+
+=item B<STORE>
+
+Traces STORE operations.
+
+=item B<DECODER>
+
+Traces decoder operations.
+
+=item B<ENCODER>
+
+Traces encoder operations.
+
+=item B<REF_COUNT>
+
+Traces decrementing certain ASN.1 structure references.
+
+=item B<HTTP>
+
+Traces the HTTP client and server, such as messages being sent and received.
+
+=back
+
=item B<OPENSSL_WIN32_UTF8>
If set, then L<UI_OpenSSL(3)> returns UTF-8 encoded strings, rather than
diff --git a/crypto/openssl/doc/man7/provider.pod b/crypto/openssl/doc/man7/provider.pod
--- a/crypto/openssl/doc/man7/provider.pod
+++ b/crypto/openssl/doc/man7/provider.pod
@@ -227,6 +227,18 @@
Other aliases may exist for example where standards bodies or common practice
use alternative names or names that OpenSSL has used historically.
+=head3 Provider dependencies
+
+Providers may depend for their proper operation on the availability of
+(functionality implemented in) other providers. As there is no mechanism to
+express such dependencies towards the OpenSSL core, provider authors must
+take care that such dependencies are either completely avoided or made visible
+to users, e.g., by documentation and/or defensive programming, e.g.,
+outputting error messages if required external dependencies are not available,
+e.g., when no provider implementing the required functionality has been
+activated. In particular, provider initialization should not depend on other
+providers already having been initialized.
+
=head1 OPENSSL PROVIDERS
OpenSSL provides a number of its own providers. These are the default, base,
diff --git a/crypto/openssl/engines/e_afalg.c b/crypto/openssl/engines/e_afalg.c
--- a/crypto/openssl/engines/e_afalg.c
+++ b/crypto/openssl/engines/e_afalg.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2016-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2016-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -165,7 +165,7 @@
ts32.tv_sec = (__kernel_long_t) timeout->tv_sec;
ts32.tv_nsec = (__kernel_long_t) timeout->tv_nsec;
- return syscall(__NR_io_getevents, ctx, min, max, events, ts32);
+ return syscall(__NR_io_getevents, ctx, min, max, events, &ts32);
} else {
return syscall(__NR_io_getevents, ctx, min, max, events, NULL);
}
diff --git a/crypto/openssl/engines/e_loader_attic.c b/crypto/openssl/engines/e_loader_attic.c
--- a/crypto/openssl/engines/e_loader_attic.c
+++ b/crypto/openssl/engines/e_loader_attic.c
@@ -988,7 +988,7 @@
#ifdef _WIN32
/* Windows file: URIs with a drive letter start with a / */
if (p[0] == '/' && p[2] == ':' && p[3] == '/') {
- char c = tolower(p[1]);
+ char c = tolower((unsigned char)p[1]);
if (c >= 'a' && c <= 'z') {
p++;
diff --git a/crypto/openssl/include/crypto/bn.h b/crypto/openssl/include/crypto/bn.h
--- a/crypto/openssl/include/crypto/bn.h
+++ b/crypto/openssl/include/crypto/bn.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2014-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -73,6 +73,9 @@
*/
int bn_mul_mont_fixed_top(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
BN_MONT_CTX *mont, BN_CTX *ctx);
+int bn_mod_exp_mont_fixed_top(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *m, BN_CTX *ctx,
+ BN_MONT_CTX *in_mont);
int bn_to_mont_fixed_top(BIGNUM *r, const BIGNUM *a, BN_MONT_CTX *mont,
BN_CTX *ctx);
int bn_from_mont_fixed_top(BIGNUM *r, const BIGNUM *a, BN_MONT_CTX *mont,
diff --git a/crypto/openssl/include/crypto/cmserr.h b/crypto/openssl/include/crypto/cmserr.h
--- a/crypto/openssl/include/crypto/cmserr.h
+++ b/crypto/openssl/include/crypto/cmserr.h
@@ -1,6 +1,6 @@
/*
* Generated by util/mkerr.pl DO NOT EDIT
- * Copyright 2020-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2020-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/include/openssl/cmserr.h b/crypto/openssl/include/openssl/cmserr.h
--- a/crypto/openssl/include/openssl/cmserr.h
+++ b/crypto/openssl/include/openssl/cmserr.h
@@ -1,6 +1,6 @@
/*
* Generated by util/mkerr.pl DO NOT EDIT
- * Copyright 1995-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -49,6 +49,7 @@
# define CMS_R_ERROR_READING_MESSAGEDIGEST_ATTRIBUTE 114
# define CMS_R_ERROR_SETTING_KEY 115
# define CMS_R_ERROR_SETTING_RECIPIENTINFO 116
+# define CMS_R_ERROR_UNSUPPORTED_STATIC_KEY_AGREEMENT 196
# define CMS_R_ESS_SIGNING_CERTID_MISMATCH_ERROR 183
# define CMS_R_INVALID_ENCRYPTED_KEY_LENGTH 117
# define CMS_R_INVALID_KEY_ENCRYPTION_PARAMETER 176
diff --git a/crypto/openssl/include/openssl/http.h b/crypto/openssl/include/openssl/http.h
--- a/crypto/openssl/include/openssl/http.h
+++ b/crypto/openssl/include/openssl/http.h
@@ -33,8 +33,9 @@
# define OPENSSL_HTTP_PROXY "HTTP_PROXY"
# define OPENSSL_HTTPS_PROXY "HTTPS_PROXY"
-#define OSSL_HTTP_DEFAULT_MAX_LINE_LEN (4 * 1024)
-#define OSSL_HTTP_DEFAULT_MAX_RESP_LEN (100 * 1024)
+# define OSSL_HTTP_DEFAULT_MAX_LINE_LEN (4 * 1024)
+# define OSSL_HTTP_DEFAULT_MAX_RESP_LEN (100 * 1024)
+# define OSSL_HTTP_DEFAULT_MAX_CRL_LEN (32 * 1024 * 1024)
/* Low-level HTTP API */
OSSL_HTTP_REQ_CTX *OSSL_HTTP_REQ_CTX_new(BIO *wbio, BIO *rbio, int buf_size);
diff --git a/crypto/openssl/providers/fips-sources.checksums b/crypto/openssl/providers/fips-sources.checksums
--- a/crypto/openssl/providers/fips-sources.checksums
+++ b/crypto/openssl/providers/fips-sources.checksums
@@ -4,71 +4,71 @@
c1e674d08683a25bc053f6233f73a0d0b3a90aafe591ff57b702c7da1582e4a5 crypto/aes/aes_local.h
a2466f18da5847c7d9fbced17524633c10ce024671a72f53f9c9c55b9b9923dd crypto/aes/aes_misc.c
6979c133f76f4623e62e6e970deae70fa025e713a72b71aead5a048d49e47f6f crypto/aes/asm/aes-586.pl
-2eef5f20f1410b48bdaaafa24ded24f56f34c4ca79db1d38fa6bf1b3b19535bf crypto/aes/asm/aes-armv4.pl
-38c2cf8ed3910efd89d8721e1b0763a8fde073b91f6529d251165a0496ef9555 crypto/aes/asm/aes-c64xplus.pl
+92be9ff608331a432e95247a8f4fb9e46897d0cb76f2b6db809b61d44287964a crypto/aes/asm/aes-armv4.pl
+953897f86e2de9fa27ef411155ab3aed133af94885f1507e76449c142da78656 crypto/aes/asm/aes-c64xplus.pl
00196f01f5218ad731e6a058d406078f7228a9756d9d73f51c0d0c2a68f885af crypto/aes/asm/aes-ia64.S
-b4ef595194fe1692e1ab2b561f385da01b277cf004902e8fc99e8ac5389bbd35 crypto/aes/asm/aes-mips.pl
-123c4498c94040b70708fdd911cb08c6411b020b4cf3eb761d6fa22c583c3e6f crypto/aes/asm/aes-parisc.pl
-7a7f2f90791415ef4ffc1ba2a6f6b6fe994bfe0e03d3bf9dab6e428e6874695c crypto/aes/asm/aes-ppc.pl
-d139e5ad69560fd0ffd8aa2e72304e463650cea4c657be7a90e0d1eb782d580a crypto/aes/asm/aes-s390x.pl
-133ba35d77002abcd430414749c4e98c4a319630da898e45ff8dbc5800176df1 crypto/aes/asm/aes-sparcv9.pl
-c98690249d490d23e6fee84f672f1463ffc029427110a4329244a59e4e4aaed8 crypto/aes/asm/aes-x86_64.pl
-7ec99947b47e56595f0b085b8bda0b3113112f694e78b1f71b63ecd1f0fa2c67 crypto/aes/asm/aesfx-sparcv9.pl
-ab94a27e533e164bcf09898a6f6019f43609d51a3b374cf75482dcf2914d464e crypto/aes/asm/aesni-mb-x86_64.pl
-74939261340a0056eb9333fff1c843c8758b9f93de3d94650cd6d2899c6790d8 crypto/aes/asm/aesni-sha1-x86_64.pl
-ce91f0893a2a35fdf4c024ccb0fd8329b30fdbd955f0ae011ab948101ee14951 crypto/aes/asm/aesni-sha256-x86_64.pl
+88b6f8396cd9d86004743d5c3b0f72b7b8c3d5a2b00b0bbb761ba91ae5a7cdc8 crypto/aes/asm/aes-mips.pl
+7ff9c96ef3d591d45d776fa4b244601ea0d9328e289aeab1e1b92436ce7d02ad crypto/aes/asm/aes-parisc.pl
+f1244cdeadcb4e48f35bc5df19d4cfaf07e0086ad951b84f07ff6966501faa5b crypto/aes/asm/aes-ppc.pl
+ecbfe826f4c514810c3ee20e265f4f621149694c298554b2682e5de4f029f14f crypto/aes/asm/aes-s390x.pl
+ee4e8cacef972942d2a89c1a83c984df9cad87c61a54383403c5c4864c403ba1 crypto/aes/asm/aes-sparcv9.pl
+2b3b9ac56bf54334d053857a24bdb08592151e8a7a60b89b8195846b7f8ee7b5 crypto/aes/asm/aes-x86_64.pl
+c56c324667b67d726e040d70379efba5b270e2937f403c1b5979018b836903c7 crypto/aes/asm/aesfx-sparcv9.pl
+14359dc32b7f4e5c08227fb9ac8f9232c1287399463b233fec4a2ab0c19f68d1 crypto/aes/asm/aesni-mb-x86_64.pl
+2fe016e8098d1c959b6199ce98e91dfed9a3a543d6b068daf88d4c4c402701ec crypto/aes/asm/aesni-sha1-x86_64.pl
+1d3acabadedb88d1327eeb76201ea9b3f4814f44898018ffae6c73e3f400b89b crypto/aes/asm/aesni-sha256-x86_64.pl
4ff74d4e629a88ef5a9e3d3f5b340fc0a4793d16d7cc7f1b70da62512a856248 crypto/aes/asm/aesni-x86.pl
-30103cfe3b29d06b34feff48a927e0fa649e9109d35a3db64b09cfeb15426fa2 crypto/aes/asm/aesni-x86_64.pl
-f3490c936a80e012c49e577ec6e1d4d36df324dfef6264e788e6225e20b5fd52 crypto/aes/asm/aesp8-ppc.pl
-a5807ed92ec8a16d123061487c385bf1f65e50878cee95c8e8096844454129f8 crypto/aes/asm/aest4-sparcv9.pl
-d34cf129a8c63e2b77a74117ed4440a4f35408dabd90e21e70eae92d208fa516 crypto/aes/asm/aesv8-armx.pl
-a0b578b7d2787c91013547df07dfa73d8d7a420446dd624c66f7c55159817eb2 crypto/aes/asm/bsaes-armv7.pl
-34accd08242a6bf4a751105f89b0c4de2cd7e54320753587815647abff7124de crypto/aes/asm/bsaes-x86_64.pl
-d9bc047db9b2f54f27fe0d6e2ede9239b4a1f57a14bf89fa3cfba6b836599386 crypto/aes/asm/vpaes-armv8.pl
-516421b1a321b842f879ad69e7b82ae3e1f3efc8288c83bb34d6577996e85787 crypto/aes/asm/vpaes-ppc.pl
+c7c6694480bb5319690f94826139a93f5c460ebea6dba101b520a76cb956ec93 crypto/aes/asm/aesni-x86_64.pl
+0489a10fbb1a8ca3652848d5c1e14e519501e189bad3e5827a573c26df359691 crypto/aes/asm/aesp8-ppc.pl
+e397a5781893e97dd90a5a52049633be12a43f379ec5751bca2a6350c39444c8 crypto/aes/asm/aest4-sparcv9.pl
+e3955352a92d56905d63e68937e4758f13190a14a10a3dcb1e5c641c49913c0c crypto/aes/asm/aesv8-armx.pl
+5e8005fdb6641df465bdda20c3476f7176e6bcd63d5073044a0c02a327c7f172 crypto/aes/asm/bsaes-armv7.pl
+0726a2c4c15c27a12b2f7d5e16863df4a1b1daa7b7d9b728f621b2b224d290e6 crypto/aes/asm/bsaes-x86_64.pl
+1ff94d6bf6c8ae4809f64657eb89260fe3cb22137f649d3c73f72cb190258196 crypto/aes/asm/vpaes-armv8.pl
+c3541865cd02d81101cdbab4877ed82772e6980d2c677b9008b38fa1b26d36d4 crypto/aes/asm/vpaes-ppc.pl
3ec24185750a995377516bc2fb2eae8b1c52094c6fff093bff591837fc12d6c3 crypto/aes/asm/vpaes-x86.pl
-47bedbe6a04254eede121e71f11a657b1f1940aee1916bbfc04fa9fb8454f9b8 crypto/aes/asm/vpaes-x86_64.pl
-1c9a2a0e8cee4a1283c74b2e306f46f79890f6d236394de2a80d1994fd411d1d crypto/alphacpuid.pl
-7a37cadacdbecb50304228dfcb087ad7fbb6e31f6ab69c52dd161e79afb2f9ca crypto/arm64cpuid.pl
+060bb6620f50af9afecdf97df051b45b9a50be9daf343dfec1cbb29693ce00a4 crypto/aes/asm/vpaes-x86_64.pl
+2bc67270155e2d6c7da87d9070e005ee79cea18311004907edfd6a078003532a crypto/alphacpuid.pl
+0255a480b78bdcc71f76676f496962a9828eb900f53b7be13be96ae3f67fe6db crypto/arm64cpuid.pl
e0daf54f72dd8fd1bc537d93f34e2a6a887a9ed6027bb33e15a327ef5ff37a42 crypto/armcap.c
-24cc7611225df0e20e414c14e80516c36d48bf99659946e85a876d8757356686 crypto/armv4cpuid.pl
+a43f2c1eef16146943745f684f2add7d186924932a47abf7fb0760cba02804e6 crypto/armv4cpuid.pl
16739d54200fb81ca7835b5814f965022a2ab41589c7787e2697e3ea72d4fafa crypto/asn1_dsa.c
-155eff9d747eed808398cfa2af4b276dfc1f9aac8a0f9d801b314ab3f2bf5b56 crypto/bn/asm/alpha-mont.pl
-894cc71b2d783e4e1b54dbef45e9e9280165a2c43981ebdd03282f0e90914928 crypto/bn/asm/armv4-gf2m.pl
-0d2e31dc9cdce02c619adfc9ac720ccf7171384e76a84cdf0e686a805dd7006e crypto/bn/asm/armv4-mont.pl
-d7df31176f725c1ae7241fee8f681fdcf2ab9eb4d3cc6c80d49c2248ae40a56a crypto/bn/asm/armv8-mont.pl
+819c9fd2b0cae9aab81c3cbd1815c2e22949d75f132f649b5883812d0bbaa39a crypto/bn/asm/alpha-mont.pl
+0070595128b250b9ebdebe48ce53d2d27ca16ec4f7c6c8bd169ab2e4a913b2d1 crypto/bn/asm/armv4-gf2m.pl
+8c1c53a725b8a4f92b8a353bfeeb393be94198df41c912e3270f9e654417b250 crypto/bn/asm/armv4-mont.pl
+a0d926004bddb4613552ffa325fac57ab64b085255f2e72881d8478f55890f5a crypto/bn/asm/armv8-mont.pl
cb4ad7b7461fcb8e2a0d52881158d0211b79544842d4eae36fc566869a2d62c8 crypto/bn/asm/bn-586.pl
-10fb73a6cc1bc064ebdcf6d7fe3c7407ea1c28b0d65ad0123046f8b1518fa75a crypto/bn/asm/c64xplus-gf2m.pl
+636da7e2a66272a81f9c99e90b36c6f132ad6236c739e8b9f2e7315f30b72edd crypto/bn/asm/c64xplus-gf2m.pl
c86664fb974362ee52a454c83c2c4b23fd5b7d64b3c9e23ef1e0dfd130a46ee5 crypto/bn/asm/co-586.pl
-b88190d748056e6a64988bf1a3d19efc4c292e3d338a65f4505cf769a2041077 crypto/bn/asm/ia64-mont.pl
+199b9b100f194a2a128c14f2a71be5a04d50d069666d90ca5b69baee1318ccb7 crypto/bn/asm/ia64-mont.pl
a511aafbf76647a0c83705d4491c898a5584d300aa449fa6166c8803372946eb crypto/bn/asm/ia64.S
-fee42cabeeb87cdf0fa0a6ff3698b2fe98a8a47d10a756052df572097161a8b9 crypto/bn/asm/mips-mont.pl
-b197a8e1be79b8c21f8d26b34b9a282ca42ec4bcd1f3212fde3889747082a1f7 crypto/bn/asm/mips.pl
-13df09cee06a21669137294f92e5c31b4bf05a8035be6800c1cb4403d7cd8290 crypto/bn/asm/parisc-mont.pl
-25c96e545b4981d45557eb14ea5c83aa2d6375ae0df806cb6e6ded2f59ddfed3 crypto/bn/asm/ppc-mont.pl
-1c057083546fa1a3bb1b9819dc5110f5a3b11b7bf5a2fb275012323bd7412403 crypto/bn/asm/ppc.pl
+687c5d6606fdfd0e242005972d15db74a9cbac2b8a9a54a56fcb1e99d3880ff3 crypto/bn/asm/mips-mont.pl
+8aca83d2ec45a40af15e59cff1ac2dc33737a3d25f0a0b74d401fa778a5c5eb8 crypto/bn/asm/mips.pl
+b27ec5181e387e812925bb26823b830f49d7a6e4971b6d11ea583f5632a1504b crypto/bn/asm/parisc-mont.pl
+9973523b361db963eea4938a7a8a3adc692e1a4e1aec4fa1f1e57dc93da37921 crypto/bn/asm/ppc-mont.pl
+59cd27e1e10c4984b7fb684b27f491e7634473b1bcff197a07e0ca653124aa9a crypto/bn/asm/ppc.pl
e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 crypto/bn/asm/ppc64-mont-fixed.pl
-fe9278a2504fb40257637a4718081775c29c4eb81f87a8528e5c85f8d0c6281a crypto/bn/asm/ppc64-mont.pl
-94b2d5cf0faf2efddeb5fb7c575dabc35c1791715cc9299d59a01d9f96cb2d6f crypto/bn/asm/rsaz-avx2.pl
-cd0861a565231f67252e172420f6914fe47a324b35916c29f6304491447fe84c crypto/bn/asm/rsaz-avx512.pl
-c19c717d87dd1ba74f138af05c044c05f5d025e26323637f46ba54a8c871a378 crypto/bn/asm/rsaz-x86_64.pl
-ae26becda9f6d30e9edde8bb89c251a0c40a9a6c879c4cdaec273d8c09af9cd6 crypto/bn/asm/s390x-gf2m.pl
-2700337ef133d6688047a1a8e1c671db06016aae777679923ce2b301896762cf crypto/bn/asm/s390x-mont.pl
+a25be64867ab837d93855af232e2bfa71b85b2c6f00e35e620fdc5618187fb6f crypto/bn/asm/ppc64-mont.pl
+231579e532443665020d4d522d9f11713d9c5d5c814b95b434b0f65452e16de4 crypto/bn/asm/rsaz-avx2.pl
+1657600d320ea549b527b2d878a7658533d60d26eeb38f42ea470fc612f9bb53 crypto/bn/asm/rsaz-avx512.pl
+31e84dc905b13e38850071528d3abbfcaf8910bbc8b46f38d19c2b386a5f838e crypto/bn/asm/rsaz-x86_64.pl
+30fedf48dfc5fec1c2044b6c226dd9fc42a92522cc589797a23a79d452bdd2cf crypto/bn/asm/s390x-gf2m.pl
+590388d69d7ac3a0e9af4014792f4f0fdb9552719e8fb48ebc7e5dfca2a491d4 crypto/bn/asm/s390x-mont.pl
aa02597f3dc09cfbc190aedb75711859ba0f3efff87067ebfba1ec78ebee40d7 crypto/bn/asm/s390x.S
-87d49e83a7df467097fdfc577aa206be9ee622c40fcbbbe5133b35d9783b7816 crypto/bn/asm/sparct4-mont.pl
+2f7cbc2c3d93b1bbc4953dda38b9ae0ab3a0a8331a0418d94d9b286183736c9e crypto/bn/asm/sparct4-mont.pl
ca21a9ccbc54e19fb7c2e6cdf286ce7cb08b0fba960c777c6edce5c57ccc2101 crypto/bn/asm/sparcv8.S
fbc93c8dbbecefe66086f58fe9719ed87b13b2cdc61454a10e841228296fecef crypto/bn/asm/sparcv8plus.S
-2ec1497fa06826f7bc574239e425dd8dda0d4a2743e1fe87669ede900291fcb6 crypto/bn/asm/sparcv9-gf2m.pl
-1f490fe184c7a51b2d0646a59e69aa659bfe51270ad21594951b8d7b785bac38 crypto/bn/asm/sparcv9-mont.pl
-277dcb7faa1913b25fd43946c50039bcdd45cb643fd9ddeedd6c207cefa4dd50 crypto/bn/asm/sparcv9a-mont.pl
+127832c1e3d298aad805236776488f5f8836b6a0fdbce3f6b42678163df3909f crypto/bn/asm/sparcv9-gf2m.pl
+1622f04a8918724ac0e8804baf285fdafa0eeaaecc36c7facd459d0ff13a8cac crypto/bn/asm/sparcv9-mont.pl
+b69083f78b4b4f7097de4462d16649532fb82c453a82cdd9cc1393122661d6e2 crypto/bn/asm/sparcv9a-mont.pl
d404375a21d33396824a3da212d6646d4f3150dd141ee4b4a250aefae3482efb crypto/bn/asm/via-mont.pl
-d632edf9b9bab7d2cd2d616512a98d15cf4b3ebba7a8e7b83650d654ceb52ecb crypto/bn/asm/vis3-mont.pl
+d24f3e97239c8eed5efc721521b025b7256c15e67a54ea6b5c4cf8f7cd0f89ea crypto/bn/asm/vis3-mont.pl
89278854f44d95be916516609ce6f79dcd346bab52574b9b6336a9952aa94bee crypto/bn/asm/x86-gf2m.pl
90d4ae234c08267adce9ed38d56e0edc223f7480cb9605f5d7399d0b3914c6be crypto/bn/asm/x86-mont.pl
d444ca73875e97e0ea88b20e4c02f2fcf3850e8b9311e3b67a2d04fe2796d543 crypto/bn/asm/x86_64-gcc.c
-a5481ca55d94dc7ebdc93173610d38ae2569cea1fe9b5180debe0ab94e455ce1 crypto/bn/asm/x86_64-gf2m.pl
-d8cc080824a72774cb3343a3d50ddf8f41a5b8321203d4c9a764762b62498b96 crypto/bn/asm/x86_64-mont.pl
-03788cb685268e6a50ddfa742ea1fe937570c9b86f2ebc88ee35f3304f67c045 crypto/bn/asm/x86_64-mont5.pl
+709ddee92e9222ee0ed27bfb90db556e85e2d302e4a9131afa25fdc14c4d858f crypto/bn/asm/x86_64-gf2m.pl
+da7f7780d27eed164797e5334cd45b35d9c113e86afaca051463aef9a8fd787c crypto/bn/asm/x86_64-mont.pl
+259fb8d7f40c0dba46920b1f169d5b37de03b0fda645463d19e3ae2b56de851d crypto/bn/asm/x86_64-mont5.pl
0ea8185a037a2951bb3d1e590bbbdeac305176d5e618f3e43a04c09733a9de34 crypto/bn/bn_add.c
759c2b9df808b3562fe8b0c7778dbadbf35f261e14fc2d5090d18c35b4181760 crypto/bn/bn_asm.c
14bd5a35c05fcf454854b92fb30b356d7ac618c1eb699dd798f6ad2936d1f5ee crypto/bn/bn_blind.c
@@ -77,10 +77,10 @@
2893b6d03d4850d09c15959941b0759bbb50d8c20e873bed088e7cde4e15a65a crypto/bn/bn_ctx.c
d94295953ab91469fe2b9da2a542b8ea11ac38551ecde8f8202b7f645c2dea16 crypto/bn/bn_dh.c
74b63a4515894592b7241fb30b91b21510beaa3d397809e3d74bc9a73e879d18 crypto/bn/bn_div.c
-49e59eac540db304ab0ca7bee3ba9d45f89548fff98155561bbdb6602d0aab1d crypto/bn/bn_exp.c
+46357d2d30109ae59482332adf604a5ef1bd64c7de08cc808db028c45190ba93 crypto/bn/bn_exp.c
ec2b6e3af6df473a23e7f1a8522f2554cb0eb5d34e3282458c4a66d242278434 crypto/bn/bn_exp2.c
baba7c8ae95af6aa36bc9f4be3a2eed33d500451e568ca4bfc6bc7cb48d4f7ea crypto/bn/bn_gcd.c
-5fbb1ab8463cd5544a1d95cf7996b6387ae634984a42256b7a21482ce3ac30a2 crypto/bn/bn_gf2m.c
+99325cf50bf72b5d77048c20d7fa4f80a179dc6357023745f9a58c8e914ae136 crypto/bn/bn_gf2m.c
081e8a6abc23599307dab3b1a92113a65e0bf8717cbc40c970c7469350bc4581 crypto/bn/bn_intern.c
602ed46fbfe12c899dfb7d9d99ff0dbfff96b454fce3cd02817f3e2488dd9192 crypto/bn/bn_kron.c
81a4afc27dd1e90c4bfa81c8d385214ce8a2b5884537752944a71ebebd91f4b0 crypto/bn/bn_lib.c
@@ -101,14 +101,14 @@
24e62baa56e02f2db6454e10168b7c7fa7638db9221b9acda1803d43f38f36e0 crypto/bn/bn_word.c
be27115efd36f0077a3ec26b1ff1f586b0b8969ba05d8ffa34b2ff4badf227bf crypto/bn/rsaz_exp.c
c4d64da1cdc732ea918fccd6a7bb2746b03365dd26f7ba1e74e08c307ca4c58e crypto/bn/rsaz_exp.h
-5b82cb8dbf3087c2e671871cb0a92e4039223a51af533a2ee996f3bfd47453a7 crypto/bn/rsaz_exp_x2.c
+9bc3bf8965f98915f9019d2f516345e73c435c5bd8ad94bb4b7057809a7d1383 crypto/bn/rsaz_exp_x2.c
834db8ff36006e5cb53e09ca6c44290124bd23692f4341ea6563b66fcade4cea crypto/bsearch.c
c39334b70e1394e43f378ae8d31b6e6dc125e4d9181e6536d38e649c4eaadb75 crypto/buffer/buffer.c
-d2bfdfd96b182741d2d51f91478ffcc48491b0da44662bc1c32bc506b3eef1ba crypto/c64xpluscpuid.pl
+5f43844b5d8665de9ab895f93599150a327d73ec2674bbf7d7c512d30163022d crypto/c64xpluscpuid.pl
0e1a41a2d81b5765bca3df448f60bf1fad91e485fe89dd65a7300ffc419e316d crypto/cmac/cmac.c
5113d8d12d884f845cad3d35d92f0a1ee20ebafd7a169273642f4e8178711de9 crypto/context.c
c309d81ea991ddf5be4337afad2fd132169f7443c76f863349d3f3c82f3374e4 crypto/core_algorithm.c
-f0fd9eb38bf7f196bbb4d26ce8fdf86d0a4f9db219157e66b2c0ffefb4f42005 crypto/core_fetch.c
+65ba41169f8fec7cb8466c3458721e3150057fb587db087a70752e5e08201381 crypto/core_fetch.c
799c84d224639c6760c5c28e0e287500a973ca6d0c3d7c1bdcd61b0da4018b3c crypto/core_namemap.c
469e2f53b5f76cd487a60d3d4c44c8fc3a6c4d08405597ba664661ba485508d3 crypto/cpuid.c
71f0fff881eb4c5505fb17662f0ea4bbff24c6858c045a013ad8f786b07da5c4 crypto/cryptlib.c
@@ -138,15 +138,15 @@
196dc024873e413d92672c3a9b6c062ed6269250b0da6d41c0da1c03cfec9ef8 crypto/dsa/dsa_ossl.c
9f501a59c09fc3cb3caafaff25abd44397a94d1062950a4d62e855d2c8986b5a crypto/dsa/dsa_sign.c
53fa10cc87ac63e35df661882852dc46ae68e6fee83b842f1aeefe00b8900ee1 crypto/dsa/dsa_vrf.c
-786779d7014bc04846832f80638743784a3850c7ee36e4a8062fe8eb7ac31c9b crypto/ec/asm/ecp_nistp521-ppc64.pl
-2e3056ea14fab8b306b0281d6a6f4317a6e86dbf652a79ade726e716cd79bb1e crypto/ec/asm/ecp_nistz256-armv4.pl
-a02edef19d22c5aba196080942111ab0172fc2ebe6d6c40db2beb6a1a2d885c6 crypto/ec/asm/ecp_nistz256-armv8.pl
-729729f8233c95138158f4647b33a36cf175e707ce29563db0eedc811f324ec0 crypto/ec/asm/ecp_nistz256-ppc64.pl
-78a5b172f7c13ae8ac622439ffb9d99b240dbb4bbda3f5c88d1533ae74a445ad crypto/ec/asm/ecp_nistz256-sparcv9.pl
+d9722ad8c6b6e209865a921f3cda831d09bf54a55cacd1edd9802edb6559190a crypto/ec/asm/ecp_nistp521-ppc64.pl
+78ad06b88fcc8689a3a846b82f9ee01546e5734acd1bccf2494e523b71dc74d1 crypto/ec/asm/ecp_nistz256-armv4.pl
+4617351d2de4d0b2abfd358c58050cee00702d0b4c1acca09312ec870e351c7d crypto/ec/asm/ecp_nistz256-armv8.pl
+3715ddd921425f3018741037f01455ed26a840ace08691a800708170a66cf4d2 crypto/ec/asm/ecp_nistz256-ppc64.pl
+cfe7e75a2fddc87a7251684469a8808b9da82b2f5725eafad5806920f89932bd crypto/ec/asm/ecp_nistz256-sparcv9.pl
922725c4761cfa567af6ed9ecab04f2c7729ae2595f2fc0fa46dc67879dc87b0 crypto/ec/asm/ecp_nistz256-x86.pl
-19ba01af58788e2873ebc1d5b503a76604bec0b9b6296fa794946e141fc945a4 crypto/ec/asm/ecp_nistz256-x86_64.pl
-e806141073aa3792e2748f6feeee6d3017124b3bc6059a9eca0d53a2f5785346 crypto/ec/asm/x25519-ppc64.pl
-a397592dc9fdb13016311db6184b4a3a4f2e198aacb03528f770f30ea4966cc4 crypto/ec/asm/x25519-x86_64.pl
+ac327475c7ec828d11aa05628b4e3b81ec3b1400f30fe7bec01daf3cf71f2dc9 crypto/ec/asm/ecp_nistz256-x86_64.pl
+cc727533130f5f1a29229929b3d4e8454585d647be25d6344f3c6a0240998368 crypto/ec/asm/x25519-ppc64.pl
+ee897e230964511baa0d1bf95fb938312407a40a88ebe01476879c2763e5f732 crypto/ec/asm/x25519-x86_64.pl
340336e01aa04fcde9bfd56536f90c9bc0ad56a002b6cfa321a1e421f1e93ceb crypto/ec/curve25519.c
9a95ec8366154bb20aeb24f4767a8cbb9953ca0380708eb2f39caca6078cd59e crypto/ec/curve448/arch_32/f_impl32.c
063dac1e4a9573c47532123e9e03e3532a7473cc3e146521ba9ec6f486ddf3b1 crypto/ec/curve448/arch_64/arch_intrinsics.h
@@ -166,16 +166,16 @@
ae1637d89287c9d22a34bdc0d67f6e01262a2f8dcef9b61369dba8c334f5a80d crypto/ec/ec2_oct.c
6bbbf570ce31f5b579f7e03ec9f8a774663c7c1eb5e475bd31f8fee94a021ffc crypto/ec/ec2_smpl.c
2a71bd8dbe4f427c117d990581709a4ddce07fa8e530794b5a9574fef7c48a0c crypto/ec/ec_asn1.c
-69b1b3acb4295f5fff961b339e8ace913176ca63fcedf4af0da4c27171f24f94 crypto/ec/ec_backend.c
+e959960fe9a78ea67346048c9c02428203819d5b443d18fe7bb26cd1ca28fcdc crypto/ec/ec_backend.c
86e2becf9b3870979e2abefa1bd318e1a31820d275e2b50e03b17fc287abb20a crypto/ec/ec_check.c
265f911b9d4aada326a2d52cd8a589b556935c8b641598dcd36c6f85d29ce655 crypto/ec/ec_curve.c
8cfd0dcfb5acbf6105691a2d5e2826dba1ff3906707bc9dd6ff9bffcc306468f crypto/ec/ec_cvt.c
95ce53663ab8a1d05bd6f4999f30113e1edce771fb6d218a772fe02de7bdaf4d crypto/ec/ec_key.c
7e40fc646863e0675bbb90f075b809f61bdf0600d8095c8366858d9533ab7700 crypto/ec/ec_kmeth.c
-bbd6f618c3dfe425ce0ba1c6710fe59418130e06351881162a590475e6438c44 crypto/ec/ec_lib.c
+fea5cd863cd94b4e543b72942ed8c23175359cfab99ca65203af4ebecb001a15 crypto/ec/ec_lib.c
a8a4690e42b4af60aad822aa8b16196df337906af53ea4db926707f7b596ff27 crypto/ec/ec_local.h
fa901b996eb0e460359cd470843bdb03af7a77a2f1136c5e1d30daef70f3e4d2 crypto/ec/ec_mult.c
-129c6b42417bfcf582f4a959cfd65433e6f85b158274f4fa38f9c62615ac9166 crypto/ec/ec_oct.c
+205b17b41e6678f40ec2a92e7856e87904e57121e7dc3120d14a4c4eeafb15b0 crypto/ec/ec_oct.c
c7fba2f2c33f67dafa23caef8c3abd12f5336274a9a07d412b83be0366969ee6 crypto/ec/ecdh_kdf.c
b2cf8f052a5716137da7b0e857ed7a5df5fb513b6d14534199a05e32f2b5a866 crypto/ec/ecdh_ossl.c
2e00c2e0e6f6d58b81fc23fe500f59e98793dc828ca87d64eba10cc0fddd0dc1 crypto/ec/ecdsa_ossl.c
@@ -228,19 +228,19 @@
7290d8d7ec31a98b17618f218d4f27b393501c7606c814a43db8af1975ad1d10 crypto/lhash/lhash.c
5d49ce00fc06df1b64cbc139ef45c71e0faf08a33f966bc608c82d574521a49e crypto/lhash/lhash_local.h
f866aafae928db1b439ac950dc90744a2397dfe222672fe68b3798396190c8b0 crypto/mem_clr.c
-78a20112586dbce2b8b6e509a0f46f6a36f2a4acf53c3f3511daf7932a71c391 crypto/modes/asm/aes-gcm-armv8_64.pl
-e482f02932d77d61142548ca4f3c8d5709d88ec14ab84723d82331444c0f57da crypto/modes/asm/aesni-gcm-x86_64.pl
-8fdcb4313fa3a6e541a697525856b9527a06ddf4c794f9393e843f86d67f543c crypto/modes/asm/ghash-alpha.pl
-ace8c376b394439301cecaf468d2a9a8adae21eff1d43191cefbf6765023452d crypto/modes/asm/ghash-armv4.pl
-c22f4945e7de3bd7bfef73447f09983e40a3e4dd0938244d902a1c44c98a8467 crypto/modes/asm/ghash-c64xplus.pl
-315a76491cdba48c88df6549c9efd96b50515400810b185a568b7a871681e03d crypto/modes/asm/ghash-ia64.pl
-25e9f494fcb6eb636c04af2f322736fae8aa339037e199332c96b8c9c3a50afa crypto/modes/asm/ghash-parisc.pl
-f22d5fa646b4fc2db008b6b05ec07c8790d3ad5485d2b10218fd11d0e81030ba crypto/modes/asm/ghash-s390x.pl
-de97107e0c19ff9dd4069f0761eccb00e0b3ced345e1f119ab3b918dd2f9c5f6 crypto/modes/asm/ghash-sparcv9.pl
+e14f48d4112c0efe3826b4aa390cc24045a85298cc551ec7f3f36ac4236d7d81 crypto/modes/asm/aes-gcm-armv8_64.pl
+1d686af304f94743038f916125effcb51790c025f3165d8d37b526bbeee781f0 crypto/modes/asm/aesni-gcm-x86_64.pl
+c2e874a8deb418b5d8c935b2e256370566a5150e040c9fa008cdb5b463c26904 crypto/modes/asm/ghash-alpha.pl
+6bc7d63569c73d7020ede481f2de05221ac92403c7cc11e7263ada7644f6aa9b crypto/modes/asm/ghash-armv4.pl
+097975df63370de7ebea012d17de14fc1f361fb83acf03b432a99ae7d5bceb24 crypto/modes/asm/ghash-c64xplus.pl
+fdde3bc48b37790c6e0006014da71e7a831bbb4fdbfcda2d01dbe0ceb0ba88fa crypto/modes/asm/ghash-ia64.pl
+e472d73d06933667a51a0af973479993eed333c71b43af03095450acb36dbeb4 crypto/modes/asm/ghash-parisc.pl
+6fb4332ac88113a20915ad4de1931ef88b0114b5379b16e1d967820e1229fbb0 crypto/modes/asm/ghash-s390x.pl
+6af1a05981e1d41e4dea51e58938360e3abc4a4f58e179908242466d032b1a8a crypto/modes/asm/ghash-sparcv9.pl
26f55a57e77f774d17dfba93d757f78edfa3a03f68a71ffa37ccf3bfc468b1e2 crypto/modes/asm/ghash-x86.pl
-2a0d23a644083e46745c7cb1ca79de393af9336a2e8eab7c85ffeb3b7b1a286f crypto/modes/asm/ghash-x86_64.pl
-b407d9fc6ea65fe1a05edc2d139298d78391f3c165314fa6d56dd375b8e453cd crypto/modes/asm/ghashp8-ppc.pl
-d8436f6dc43a18d49b1a16999ecb513ccf4483f418f75edc01ce68e777c614a9 crypto/modes/asm/ghashv8-armx.pl
+72744131007d2389c09665a59a862f5f6bb61b64bd3456e9b400985cb56586b8 crypto/modes/asm/ghash-x86_64.pl
+a4e9f2e496bd9362b17a1b5989aa4682647cefcff6117f0607122a9e11a9dfd9 crypto/modes/asm/ghashp8-ppc.pl
+69a13f423ca74c22543900c14aef4a848e3bc75504b65d2f51c6903aebcc17a7 crypto/modes/asm/ghashv8-armx.pl
65112dfe63cd59487e7bdb1706b44acfcf48ecede12cc3ae51daa5b661f41f06 crypto/modes/cbc128.c
1611e73dc1e01b5c2201f51756a7405b7673aa0bb872e2957d1ec80c3530486f crypto/modes/ccm128.c
d8c2f256532a4b94db6d03aea5cb609cccc938069f644b2fc77c5015648d148d crypto/modes/cfb128.c
@@ -257,7 +257,7 @@
4fda13f6af05d80b0ab89ec4f5813c274a21a9b4565be958a02d006236cef05c crypto/params_dup.c
b6cbfc8791b31587f32a3f9e4c117549793528ebddc34a361bad1ad8cf8d4c42 crypto/params_from_text.c
97cb7414dc2f165d5849ee3b46cdfff0afb067729435d9c01a747e0ca41e230c crypto/ppccap.c
-826a78afb376cbf1e87f12a2a67eef2ee47059a0fd3f9cba7ce7f035e34f8052 crypto/ppccpuid.pl
+3ca43596a7528dec8ff9d1a3cd0d68b62640f84b1d6a8b5e4842cfd0be1133ad crypto/ppccpuid.pl
b4d34272a0bd1fbe6562022bf7ea6259b6a5a021a48222d415be47ef5ef2a905 crypto/property/defn_cache.c
c3709986fd2ab18f3c6136d8dd7705a4538986aa789ceafe770c3a376db3c569 crypto/property/property.c
66da4f28d408133fb544b14aeb9ad4913e7c5c67e2826e53f0dc5bf4d8fada26 crypto/property/property_local.h
@@ -288,50 +288,50 @@
3aba73dacebb046faf8d09dc279149b52c629004b524ec33e6d81c8ad0bc31a8 crypto/rsa/rsa_sp800_56b_gen.c
1c1c2aeeb18bf1d69e8f134315b7e50d8f43d30eb1aa5bf42983eec9136a2fdc crypto/rsa/rsa_x931.c
0acbebed48f6242d595c21e3c1ad69da0daa960d62062e8970209deda144f337 crypto/s390xcap.c
-370d98549d4d98e04b60677b319b85904259359bd9401dd5385aa728278e6626 crypto/s390xcpuid.pl
+22205848cfb55116ebf999dced8331b575886a609ce29e6886e6267b2310c337 crypto/s390xcpuid.pl
5fa59240ca885cbc0c1cd026934b226d44fc9c3fdf0c2e7e3a7bd7f4963ca2e5 crypto/self_test_core.c
-58a1a8aeb45421954fa0e4bc87157addb96d086ac4e6aade47da96523cecaa74 crypto/sha/asm/keccak1600-armv4.pl
-d6df6cfdd4e2fee52dc16fd31c91768c45c48c22700c486406d70ecb37e8a8bb crypto/sha/asm/keccak1600-armv8.pl
-81bfb4484d68a3a3e1d704855f76356090867fe10a75db7707b6f7364e8ee8da crypto/sha/asm/keccak1600-avx2.pl
-b7bb35d51d439abbf3810454ccb9bfb5a51e2111eaf389fb95796ad6220a61a0 crypto/sha/asm/keccak1600-avx512.pl
-37365dcc576f99006132271968bab990e2bebdab7f4168c726bd449a2fa51c6a crypto/sha/asm/keccak1600-avx512vl.pl
-2767ae2f379a7a3d0c6dd1471d4d90dd896545b456cb6efd6c230df29e511d70 crypto/sha/asm/keccak1600-c64x.pl
+05c533fde7fdba0c76103e97d881b7224c8427451b453e2f6413552996063e31 crypto/sha/asm/keccak1600-armv4.pl
+ca3b2b654f9a8c4bc2fa2538c1f19d17acd4a6b9e0df6a4b81df04efa697e67e crypto/sha/asm/keccak1600-armv8.pl
+12b7acce2fba0bc0e1ca07842ec84be6a022f141c86e077abb42c864af1d8d9c crypto/sha/asm/keccak1600-avx2.pl
+faf0cccb685d5abc807e08db194f847c67b940da2fc3c235c210dc31d73a5334 crypto/sha/asm/keccak1600-avx512.pl
+be1e7dd9998e3f31cfa6e1b17bc198aeec584a8b76820e38f71d51b05f8a9f2a crypto/sha/asm/keccak1600-avx512vl.pl
+33bdcc6f7668460c3bdf779633e43bfad62b937042a73acb007b462fc5b0a034 crypto/sha/asm/keccak1600-c64x.pl
09fc831dd39bd90a701e9b16d9e9987cc215252a22e1e0355f5da6c495fca35a crypto/sha/asm/keccak1600-mmx.pl
-485dcc50a51705b86c6dc47e6f58d092fec05dfbfcdf4f2785e4235c67cfe742 crypto/sha/asm/keccak1600-ppc64.pl
-49535b60a1a981059a2a9636fdeeab22942d2a15e775b1ec9b5af8937a46aa76 crypto/sha/asm/keccak1600-s390x.pl
-093751655b460d33b2fa6aa4d63a86e902f7f20b2d2a02ed948b78e5698c0dd5 crypto/sha/asm/keccak1600-x86_64.pl
-e0a4a1df82716053a3f01ec0b096c735a0e3c4f6c9d9ec6b2006b37aaac64448 crypto/sha/asm/keccak1600p8-ppc.pl
+ce4a58129e5ee3ac4c9dfec5ecc010440570ebf7bf869e3e9977f2121a64b27a crypto/sha/asm/keccak1600-ppc64.pl
+a859fc8cb073b2d0012a93f3155a75fb6eb677441462b0de4f8cf8df1445e970 crypto/sha/asm/keccak1600-s390x.pl
+618dcd4891b4064d3b8aa6dcd74bea7ef55f4962a64957b05a05448f6e3e0f17 crypto/sha/asm/keccak1600-x86_64.pl
+831b8b02ab25d78ba6300ce960d96c13439bfba5844e13061e19c4e25cbacc3d crypto/sha/asm/keccak1600p8-ppc.pl
75d832db9bf0e98e7a5c522169060a6dd276c5118cfb297fc3f1111f55cd4007 crypto/sha/asm/sha1-586.pl
-8d937771993f04407f5fdcca8ca8565f9f8a4d9c9a8f7bfd4e9f9121dd0450bb crypto/sha/asm/sha1-alpha.pl
-ab7ecd62896324393b1fd9020515b9c0d2b9cc34d559f2efafa35affc9a1485d crypto/sha/asm/sha1-armv4-large.pl
-0acc4e40f793d4d2b960af2baaecc91176ba6742ddd62dca0c33ddc838c58772 crypto/sha/asm/sha1-armv8.pl
-c36f51761e7f59bdd0f61230297fb802542ac5d2d1c6d2b1096ed937131bd583 crypto/sha/asm/sha1-c64xplus.pl
-4ab7c9153b085274a579b388ddff97a4ac7e11585e01811ca95b93a3ec786605 crypto/sha/asm/sha1-ia64.pl
-7a392c5ef7dc19c39d67c7080e0c5214e7a80572c85c022be7e7d4378a5f740d crypto/sha/asm/sha1-mb-x86_64.pl
-c0fea5a0d32001263c8bcf7fc0757aa68c6a7377f20fef8d28708e1b81de5dec crypto/sha/asm/sha1-mips.pl
-f11b75a54c5f42aa3a052de8091bfba47d7cac01920b2fe0ddcb637d4c9d0eb9 crypto/sha/asm/sha1-parisc.pl
-d46ef3fc166271a83144d90985034e2c514bd1020b84ec0fe5427ad593bfeb74 crypto/sha/asm/sha1-ppc.pl
-a48c7d9403fe99fbd4daec60e96eb22058da766ab9e606d084a63613962851a2 crypto/sha/asm/sha1-s390x.pl
-0e2951e0574c64ee055ffddf16ceefdec00823107d60362976605f139ad8ae68 crypto/sha/asm/sha1-sparcv9.pl
-5da48400d4fae85e205e95a2fa368e7bf525e51e274b1dd680dfb48645426c85 crypto/sha/asm/sha1-sparcv9a.pl
-04b73c902d36c28b5a7eab47cb85f743eb9c648ed5936f64f655524a1010a1b5 crypto/sha/asm/sha1-thumb.pl
-f36d7ec7464c932230585a754b91f13cea4cde5a381fc9f798d959256d07910e crypto/sha/asm/sha1-x86_64.pl
+c96e87d4f5311cd73bbdf499acc03418588be12426d878e157dd67e0099e0219 crypto/sha/asm/sha1-alpha.pl
+4ba6d1c7f12fe76bf39babea966f0a4b7f8769e0c0510cbfc2c46a65dd62d45c crypto/sha/asm/sha1-armv4-large.pl
+efc69cb0d867b7fac6b3fa8985c343d1f984d552bc8e75bbbbace0adf9ee5f15 crypto/sha/asm/sha1-armv8.pl
+11d332b4e058e9fa418d6633316d2e9f9bf520a08b2d933e877bdf38b2edefcf crypto/sha/asm/sha1-c64xplus.pl
+32ff0e701a7b8f25bcfe8477b20795de54f536527bd87d3ce694fd9aaae356d4 crypto/sha/asm/sha1-ia64.pl
+471c27efca685b2a82ad7fefe329ca54172df9f49b9785da6d706b913b75e693 crypto/sha/asm/sha1-mb-x86_64.pl
+0f5c63cf09e950d1b488935ab3b5562e3e9d5cd1a563fb88a41e3dae90a35e6d crypto/sha/asm/sha1-mips.pl
+b5ffd7b6dbb04c05de7efa2945adb67ea845e7e61a3bf163a532f7b6acdf4267 crypto/sha/asm/sha1-parisc.pl
+482cd23ca6ec38d6f62b90c68f9f20643579c50f2c0fbb0dab1c10a0e35efe77 crypto/sha/asm/sha1-ppc.pl
+28cf69efd53d7a5a8c32e0f8db32c193f41b91faf44f5f59944334bc3f5aa337 crypto/sha/asm/sha1-s390x.pl
+7fd355b412ddfa1c510e0ba3284f75b1c0d621b6db2ecb1d2a935d5cdb706628 crypto/sha/asm/sha1-sparcv9.pl
+24554e68b0e7b7db7b635ff149549015f623ca0bcd9ae90439586a2076f6ae80 crypto/sha/asm/sha1-sparcv9a.pl
+74d197cdd72400cabbff7e173f72c8976723081508b095dc995e8cd1abf3daa6 crypto/sha/asm/sha1-thumb.pl
+a59a86293e28f5600609dc8af2b39c5285580ae8636520990b000eeeb67bb889 crypto/sha/asm/sha1-x86_64.pl
c099059ef107f548ea2c2bab64a4eb8c277070ce6d74c4d32bb9808dc19c5fa3 crypto/sha/asm/sha256-586.pl
-3a8cf38dd398a7ab1d9c6701fa61c428b07c4431a0041ed3a2ddf937897825c1 crypto/sha/asm/sha256-armv4.pl
-c394bb5b0ff05595a9e6848b6602a0f29f73a79fc006593740f3ca645ad9d316 crypto/sha/asm/sha256-c64xplus.pl
-f33af8e2e2f57b7b63b8c8b35722d7d11ca6ef1f73fb6c4ccebdd3e86912f4b1 crypto/sha/asm/sha256-mb-x86_64.pl
+b9cee5c5a283f61f601d2dba68a7a76e7aba10bfafffc1a5c4987f9c0aa6f87d crypto/sha/asm/sha256-armv4.pl
+93ddc97651ee3e779144a3c6b3e46a1bc4aa81e75cd7b9df068a2aef8743d25f crypto/sha/asm/sha256-c64xplus.pl
+8be5c5d69733ecb16774aa8410b4bcb3623a9f060d2be103d8aa67bf6e4c5843 crypto/sha/asm/sha256-mb-x86_64.pl
dd82e1311703abb019975fc7b61fb87d67e1ed916dddd065aced051e851114b9 crypto/sha/asm/sha512-586.pl
-1f9ba79b1d591b7aa37b62382422cb025f5b45784d26cc5790c05cf4eb52b792 crypto/sha/asm/sha512-armv4.pl
-8136196fce18b736f671a4b4945cd4aa4ab25a28c90c6fc9ab31ff771e8e0d9f crypto/sha/asm/sha512-armv8.pl
-5b6796a9978b69fd78ee2ff1adc5cf35d44cad8194a38d1c2aba2023012cf252 crypto/sha/asm/sha512-c64xplus.pl
-e8df660671ba61aa2e8f51358baf5d8ca913093e2ee1a40c9cb46d9c2c0851f6 crypto/sha/asm/sha512-ia64.pl
-525f253ef8051bfb0e344ac2e40688ce359a42707fe360d23a03f522cc88c81a crypto/sha/asm/sha512-mips.pl
-3c3e03529d8514467f8d77c01978348636bb339315feb8041fbde7640565001e crypto/sha/asm/sha512-parisc.pl
-952ef1b10e8bbe3f638cc798b91ab9c5b47b66ed8fe94647b1beec9874f2e71e crypto/sha/asm/sha512-ppc.pl
-193a0ea240264b29dd68a425f604a6da4b18e28838dcf909dd7e711af880f782 crypto/sha/asm/sha512-s390x.pl
-dcb466a1e5938fb64ecb38b0533602192d61334da864ee8dfdcfa12d3cdfa273 crypto/sha/asm/sha512-sparcv9.pl
-bb6503967a58b767a3e73441cfabc77f15c8ac747f377e276d4aa63d05f2c3c4 crypto/sha/asm/sha512-x86_64.pl
-68d2f3b2dccb978ee42640f4fb4d2eae6b74d071017a3eedd9e7cb77762817dc crypto/sha/asm/sha512p8-ppc.pl
+8d84164f3cfd53290c0c14bb5655510b7a9238857866328c0604d64b4e76fe21 crypto/sha/asm/sha512-armv4.pl
+dadacb6d66b160913bffb4e1a6c3e5f7be6509b26e2c099701d8d3fdb92c1be0 crypto/sha/asm/sha512-armv8.pl
+6f548a088feae3b6faa179653ba449df9d3f5cda1e0561e5b5f120b32274d1eb crypto/sha/asm/sha512-c64xplus.pl
+9fa54fbc34fd881f4b344374b9b4f8fb15b641424be7af9a31c71af89ae5d577 crypto/sha/asm/sha512-ia64.pl
+fb06844e7c3b014a58dccc8ec6020c71843cfdc5be08288bc7d204f0a840c474 crypto/sha/asm/sha512-mips.pl
+11548f06d213947104a80898e000218ec0d6ff3f6913f6582de498476482ce9f crypto/sha/asm/sha512-parisc.pl
+7c0c490ce6bb11a228853aecad5e164ce84e5bdabb8a6658ae7184782076c7d3 crypto/sha/asm/sha512-ppc.pl
+38e0455fd6a2b93a7a5385379ca92bc6526585ca1eb4af365fac4c78f7285c72 crypto/sha/asm/sha512-s390x.pl
+0611845c52091b0208dd41f22ddef9dd1e68d3d92fa4c4360738b840a6314de6 crypto/sha/asm/sha512-sparcv9.pl
+f64d16c1e5c3fa4a7969de494a8372127502171a517c14be7a1e3a43a7308699 crypto/sha/asm/sha512-x86_64.pl
+8725cabb8d695c576619f19283b034074a3fa0f1c0be952a9dbe9793be15b907 crypto/sha/asm/sha512p8-ppc.pl
57f6cf54b1b5d2cac7a8f622b7b6bd1878f360fff3fa0f02352061c24162ebbb crypto/sha/keccak1600.c
306cacd3f86e5cacaca74c58ef862516515e5c0cafaff48636d537fd84f1c2fb crypto/sha/sha1dgst.c
4d8cf04f5806611e7586aab47fb28165ec1afb00168e2c9876bb36cb5c29bf8b crypto/sha/sha256.c
@@ -345,13 +345,13 @@
7b4efa594d8d1f3ecbf4605cf54f72fb296a3b1d951bdc69e415aaa08f34e5c8 crypto/threads_lib.c
a41ae93a755e2ec89b3cb5b4932e2b508fdda92ace2e025a2650a6da0e9e972c crypto/threads_none.c
3729e2bd36f945808b578e0d89fac0fcb3114e4fc9381614bcbd8a9869991716 crypto/threads_pthread.c
-88423960f0414f6fd41fba4f4c67f9f7260c2741e4788adcd52493e895ec8027 crypto/threads_win.c
-af0af59fe2cb8668a96751f343232d7faa3e7a937beb2bda09ed74fe60b9cb5f crypto/x86_64cpuid.pl
+f82715745b668297d71b66d05e6bfc3c817bf80bd967c0f33ca7ffbb6e347645 crypto/threads_win.c
+fd6c27cf7c6b5449b17f2b725f4203c4c10207f1973db09fd41571efe5de08fd crypto/x86_64cpuid.pl
bbec287bb9bf35379885f8f8998b7fd9e8fc22efee9e1b299109af0f33a7ee16 crypto/x86cpuid.pl
acbb841170d4d3eb91d969be1c0e4973b1babfd5fcd76440b0628f509f82fd76 e_os.h
249a0e58e9692920eddc1ada2ac772a0cfd749cfbf618f2f5da08280df545d8f include/crypto/aes_platform.h
8c6f308c1ca774e6127e325c3b80511dbcdc99631f032694d8db53a5c02364ee include/crypto/asn1_dsa.h
-2e8c284672c4e8e395b3da56a3abf3e65bb4346313fb6f7358e925d077a2e1e2 include/crypto/bn.h
+3bded0eaa7ccdebd0b4217b7fdb82676d5c0762a88aca462dbceaef851fafa99 include/crypto/bn.h
1c46818354d42bd1b1c4e5fdae9e019814936e775fd8c918ca49959c2a6416df include/crypto/bn_conf.h.in
7a43a4898fcc8446065e6c99249bcc14e475716e8c1d40d50408c0ab179520e6 include/crypto/bn_dh.h
e69b2b20fb415e24b970941c84a62b752b5d0175bc68126e467f7cc970495504 include/crypto/cryptlib.h
@@ -518,7 +518,7 @@
8ed4a100e4756c31c56147b4b0fab76a4c6e5292aa2f079045f37b5502fd41b9 providers/implementations/ciphers/cipher_aes_gcm_hw_aesni.inc
4c6f3a2818754a5aa7b6db36dae53e248504f9e82cc5af2ed68c723903d4f9d5 providers/implementations/ciphers/cipher_aes_hw.c
89de794c090192459d99d95bc4a422e7782e62192cd0fdb3bdef4128cfedee68 providers/implementations/ciphers/cipher_aes_hw_aesni.inc
-fac3a1878dc9c0c363d0ecdd9f74926157df54ca4f40adf8c479927395082008 providers/implementations/ciphers/cipher_aes_ocb.c
+0d77239f0cc1a9e1ecdeb45b6fae12cac2637771d29842199be08699e59f87fc providers/implementations/ciphers/cipher_aes_ocb.c
88138a1aff9705e608c0557653be92eb4de65b152555a2b79ec8b2a8fae73e8f providers/implementations/ciphers/cipher_aes_ocb.h
855869ab5a8d7a61a11674cfe5d503dfa67f59e7e393730835d1d8cf0ab85c70 providers/implementations/ciphers/cipher_aes_ocb_hw.c
6a8782c728575d69c86b735c9f47acda5c0daa04e17f1e0faef2c963f23fab20 providers/implementations/ciphers/cipher_aes_wrp.c
@@ -557,7 +557,7 @@
c95ce5498e724b9b3d58e3c2f4723e7e3e4beb07f9bea9422e43182cbadb43af providers/implementations/include/prov/macsignature.h
29d1a112b799e1f45fdf8bcee8361c2ed67428c250c1cdf408a9fbb7ebf4cce1 providers/implementations/include/prov/names.h
2187713b446d8b6d24ee986748b941ac3e24292c71e07ff9fb53a33021decdda providers/implementations/include/prov/seeding.h
-d376c58489ae36fbece94bb88939845ced04a2a0bdd55d6a3562e45a56577ae1 providers/implementations/kdfs/hkdf.c
+6091dd22e716fbe6c7c94524cdee6ad4432a572f2d3c4d360dcafafa3902d692 providers/implementations/kdfs/hkdf.c
a62e3af09f5af84dcf36f951ba4ac90ca1694adaf3747126186020b155f94186 providers/implementations/kdfs/kbkdf.c
e0644e727aacfea4da3cf2c4d2602d7ef0626ebb760b6467432ffd54d5fbb24d providers/implementations/kdfs/pbkdf2.c
c0778565abff112c0c5257329a7750ec4605e62f26cc36851fa1fbee6e03c70c providers/implementations/kdfs/pbkdf2.h
@@ -566,14 +566,14 @@
8571556d77d10e8edc98212473a38f09632e3f19e9995dde89ee6c95f2e84ccf providers/implementations/kdfs/sskdf.c
589f6133799da80760e8bc3ab0191a341ab6d4d2706e92e6eb4a24b0250fefa6 providers/implementations/kdfs/tls1_prf.c
4d4a6d9a562d2dcfec941d3f113a544663b5ac2fbe4accd89ec70c1cc11751d0 providers/implementations/kdfs/x942kdf.c
-6b6c776b12664164f3cb54c21df61e1c4477c7855d89431a16fb338cdae58d43 providers/implementations/kem/rsa_kem.c
+58acb0ff36bf7e463ba714b347b714eccab9fda77c4ca6bacc3a55e6d2ce5ad9 providers/implementations/kem/rsa_kem.c
11a0d0fb88ed88e965f10b3a0ef6c880f60341df995128f57ad943053aaf15b2 providers/implementations/keymgmt/dh_kmgmt.c
-a329f57cb041cd03907e9d996fbc2f378ee116c7f8d7fbf1ea08b7a5df7e0304 providers/implementations/keymgmt/dsa_kmgmt.c
+9316fc619e8d8a1d841aa0936fc62c28eb2b4c60cc6c9b2d64b72f8641f28abb providers/implementations/keymgmt/dsa_kmgmt.c
9bc88451d3ae110c7a108ee73d3b3b6bda801ec3494d2dfb9c9970b85c2d34fe providers/implementations/keymgmt/ec_kmgmt.c
258ae17bb2dd87ed1511a8eb3fe99eed9b77f5c2f757215ff6b3d0e8791fc251 providers/implementations/keymgmt/ec_kmgmt_imexport.inc
-011c36aad6834729043f23eacab417732541ee23916d9afa5bb9164862be00bb providers/implementations/keymgmt/ecx_kmgmt.c
+d0c67b7fbddd51dcfebd96bf99794ca3bc437d50974ebcd56968fb8dd3627b0f providers/implementations/keymgmt/ecx_kmgmt.c
053a2be39a87f50b877ebdbbf799cf5faf8b2de33b04311d819d212ee1ea329b providers/implementations/keymgmt/kdf_legacy_kmgmt.c
-1646b477fa231dd0f6c22444c99098f9b447cab0d39ff69b811262469d4dbe09 providers/implementations/keymgmt/mac_legacy_kmgmt.c
+37e2f9f904eeabf94b1e4152b67ac236f872aa78dd7e47bf0de1b8f50ac19b6c providers/implementations/keymgmt/mac_legacy_kmgmt.c
19f22fc70a6321441e56d5bd4aab3d01d52d17069d4e4b5cefce0f411ecece75 providers/implementations/keymgmt/rsa_kmgmt.c
5eb96ea2df635cf79c5aeccae270fbe896b5e6384a5b3e4b187ce8c10fe8dfc7 providers/implementations/macs/cmac_prov.c
e69aa06f8f3c6f5a26702b9f44a844b8589b99dc0ee590953a29e8b9ef10acbe providers/implementations/macs/gmac_prov.c
@@ -588,7 +588,7 @@
04339b66c10017229ef368cb48077f58a252ebfda9ab12b9f919e4149b1036ed providers/implementations/rands/test_rng.c
cafb9e6f54ad15889fcebddac6df61336bff7d78936f7de3bb5aab8aee5728d2 providers/implementations/signature/dsa_sig.c
a30dc6308de0ca33406e7ce909f3bcf7580fb84d863b0976b275839f866258df providers/implementations/signature/ecdsa_sig.c
-02e833a767afbe98247d6f09dfb1eb5a5cf7304a93f2c5427a9f6af9c8a3b549 providers/implementations/signature/eddsa_sig.c
+09647b736980ac3c762f1e7c10cbfee78e2c6ab327ac62e5039968cea034ff3b providers/implementations/signature/eddsa_sig.c
3bb0f342b4cc1b4594ed0986adc47791c0a7b5c1ae7b1888c1fb5edb268a78d9 providers/implementations/signature/mac_legacy_sig.c
166d7e3a049b28ae2c6f94415070720d176a82e46af1613511c4b073ea705476 providers/implementations/signature/rsa_sig.c
a14e901b02fe095713624db4080b3aa3ca685d43f9ebec03041f992240973346 ssl/record/tls_pad.c
diff --git a/crypto/openssl/providers/fips.checksum b/crypto/openssl/providers/fips.checksum
--- a/crypto/openssl/providers/fips.checksum
+++ b/crypto/openssl/providers/fips.checksum
@@ -1 +1 @@
-101807560af8f62c064ad796dfa1e4c269d45aaf5303b47ad0b25fdd6cc92466 providers/fips-sources.checksums
+01b31117f96429fe4c8efbf7f4f10ef32efa2b11c69851fd227e4194db116b6f providers/fips-sources.checksums
diff --git a/crypto/openssl/providers/implementations/ciphers/cipher_aes_ocb.c b/crypto/openssl/providers/implementations/ciphers/cipher_aes_ocb.c
--- a/crypto/openssl/providers/implementations/ciphers/cipher_aes_ocb.c
+++ b/crypto/openssl/providers/implementations/ciphers/cipher_aes_ocb.c
@@ -369,12 +369,20 @@
}
if (p->data == NULL) {
/* Tag len must be 0 to 16 */
- if (p->data_size > OCB_MAX_TAG_LEN)
+ if (p->data_size > OCB_MAX_TAG_LEN) {
+ ERR_raise(ERR_LIB_PROV, PROV_R_INVALID_TAG_LENGTH);
return 0;
+ }
ctx->taglen = p->data_size;
} else {
- if (p->data_size != ctx->taglen || ctx->base.enc)
+ if (ctx->base.enc) {
+ ERR_raise(ERR_LIB_PROV, ERR_R_PASSED_INVALID_ARGUMENT);
+ return 0;
+ }
+ if (p->data_size != ctx->taglen) {
+ ERR_raise(ERR_LIB_PROV, PROV_R_INVALID_TAG_LENGTH);
return 0;
+ }
memcpy(ctx->tag, p->data, p->data_size);
}
}
diff --git a/crypto/openssl/providers/implementations/encode_decode/encode_key2text.c b/crypto/openssl/providers/implementations/encode_decode/encode_key2text.c
--- a/crypto/openssl/providers/implementations/encode_decode/encode_key2text.c
+++ b/crypto/openssl/providers/implementations/encode_decode/encode_key2text.c
@@ -112,7 +112,8 @@
use_sep = 0; /* The first byte on the next line doesnt have a : */
}
if (BIO_printf(out, "%s%c%c", use_sep ? ":" : "",
- tolower(p[0]), tolower(p[1])) <= 0)
+ tolower((unsigned char)p[0]),
+ tolower((unsigned char)p[1])) <= 0)
goto err;
++bytes;
p += 2;
diff --git a/crypto/openssl/providers/implementations/kdfs/hkdf.c b/crypto/openssl/providers/implementations/kdfs/hkdf.c
--- a/crypto/openssl/providers/implementations/kdfs/hkdf.c
+++ b/crypto/openssl/providers/implementations/kdfs/hkdf.c
@@ -669,7 +669,7 @@
EVP_MD_CTX_free(mctx);
/* Generate the pre-extract secret */
- if (!prov_tls13_hkdf_expand(md, prevsecret, mdlen,
+ if (!prov_tls13_hkdf_expand(md, prevsecret, prevsecretlen,
prefix, prefixlen, label, labellen,
hash, mdlen, preextractsec, mdlen))
return 0;
diff --git a/crypto/openssl/providers/implementations/kdfs/scrypt.c b/crypto/openssl/providers/implementations/kdfs/scrypt.c
--- a/crypto/openssl/providers/implementations/kdfs/scrypt.c
+++ b/crypto/openssl/providers/implementations/kdfs/scrypt.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2017-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2017-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -88,7 +88,9 @@
KDF_SCRYPT *ctx = (KDF_SCRYPT *)vctx;
OPENSSL_free(ctx->salt);
+ ctx->salt = NULL;
OPENSSL_clear_free(ctx->pass, ctx->pass_len);
+ ctx->pass = NULL;
kdf_scrypt_init(ctx);
}
@@ -128,7 +130,6 @@
EVP_MD_free(ctx->sha256);
ctx->sha256 = EVP_MD_fetch(ctx->libctx, "sha256", ctx->propq);
if (ctx->sha256 == NULL) {
- OPENSSL_free(ctx);
ERR_raise(ERR_LIB_PROV, PROV_R_UNABLE_TO_LOAD_SHA256);
return 0;
}
diff --git a/crypto/openssl/providers/implementations/kem/rsa_kem.c b/crypto/openssl/providers/implementations/kem/rsa_kem.c
--- a/crypto/openssl/providers/implementations/kem/rsa_kem.c
+++ b/crypto/openssl/providers/implementations/kem/rsa_kem.c
@@ -264,6 +264,17 @@
*secretlen = nlen;
return 1;
}
+
+ /*
+ * If outlen is specified, then it must report the length
+ * of the out buffer on input so that we can confirm
+ * its size is sufficent for encapsulation
+ */
+ if (outlen != NULL && *outlen < nlen) {
+ ERR_raise(ERR_LIB_PROV, PROV_R_INVALID_OUTPUT_LENGTH);
+ return 0;
+ }
+
/*
* Step (2): Generate a random byte string z of nlen bytes where
* 1 < z < n - 1
@@ -285,15 +296,33 @@
return ret;
}
-/*
- * NIST.SP.800-56Br2
+/**
+ * rsasve_recover - Recovers a secret value from ciphertext using an RSA
+ * private key. Once, recovered, the secret value is considered to be a
+ * shared secret. Algorithm is preformed as per
+ * NIST SP 800-56B Rev 2
* 7.2.1.3 RSASVE Recovery Operation (RSASVE.RECOVER).
+ *
+ * This function performs RSA decryption using the private key from the
+ * provided RSA context (`prsactx`). It takes the input ciphertext, decrypts
+ * it, and writes the decrypted message to the output buffer.
+ *
+ * @prsactx: The RSA context containing the private key.
+ * @out: The output buffer to store the decrypted message.
+ * @outlen: On input, the size of the output buffer. On successful
+ * completion, the actual length of the decrypted message.
+ * @in: The input buffer containing the ciphertext to be decrypted.
+ * @inlen: The length of the input ciphertext in bytes.
+ *
+ * Returns 1 on success, or 0 on error. In case of error, appropriate
+ * error messages are raised using the ERR_raise function.
*/
static int rsasve_recover(PROV_RSA_CTX *prsactx,
unsigned char *out, size_t *outlen,
const unsigned char *in, size_t inlen)
{
size_t nlen;
+ int ret;
/* Step (1): get the byte length of n */
nlen = RSA_size(prsactx->rsa);
@@ -307,13 +336,30 @@
return 1;
}
- /* Step (2): check the input ciphertext 'inlen' matches the nlen */
+ /*
+ * Step (2): check the input ciphertext 'inlen' matches the nlen
+ * and that outlen is at least nlen bytes
+ */
if (inlen != nlen) {
ERR_raise(ERR_LIB_PROV, PROV_R_BAD_LENGTH);
return 0;
}
+
+ /*
+ * If outlen is specified, then it must report the length
+ * of the out buffer, so that we can confirm that it is of
+ * sufficient size to hold the output of decapsulation
+ */
+ if (outlen != NULL && *outlen < nlen) {
+ ERR_raise(ERR_LIB_PROV, PROV_R_INVALID_OUTPUT_LENGTH);
+ return 0;
+ }
+
/* Step (3): out = RSADP((n,d), in) */
- return (RSA_private_decrypt(inlen, in, out, prsactx->rsa, RSA_NO_PADDING) > 0);
+ ret = RSA_private_decrypt(inlen, in, out, prsactx->rsa, RSA_NO_PADDING);
+ if (ret > 0 && outlen != NULL)
+ *outlen = ret;
+ return ret > 0;
}
static int rsakem_generate(void *vprsactx, unsigned char *out, size_t *outlen,
diff --git a/crypto/openssl/providers/implementations/keymgmt/dsa_kmgmt.c b/crypto/openssl/providers/implementations/keymgmt/dsa_kmgmt.c
--- a/crypto/openssl/providers/implementations/keymgmt/dsa_kmgmt.c
+++ b/crypto/openssl/providers/implementations/keymgmt/dsa_kmgmt.c
@@ -426,7 +426,7 @@
gctx->hindex = 0;
}
if (!dsa_gen_set_params(gctx, params)) {
- OPENSSL_free(gctx);
+ dsa_gen_cleanup(gctx);
gctx = NULL;
}
return gctx;
diff --git a/crypto/openssl/providers/implementations/keymgmt/ecx_kmgmt.c b/crypto/openssl/providers/implementations/keymgmt/ecx_kmgmt.c
--- a/crypto/openssl/providers/implementations/keymgmt/ecx_kmgmt.c
+++ b/crypto/openssl/providers/implementations/keymgmt/ecx_kmgmt.c
@@ -487,7 +487,7 @@
gctx->selection = selection;
}
if (!ecx_gen_set_params(gctx, params)) {
- OPENSSL_free(gctx);
+ ecx_gen_cleanup(gctx);
gctx = NULL;
}
return gctx;
diff --git a/crypto/openssl/providers/implementations/keymgmt/mac_legacy_kmgmt.c b/crypto/openssl/providers/implementations/keymgmt/mac_legacy_kmgmt.c
--- a/crypto/openssl/providers/implementations/keymgmt/mac_legacy_kmgmt.c
+++ b/crypto/openssl/providers/implementations/keymgmt/mac_legacy_kmgmt.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2020-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2020-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -399,7 +399,7 @@
struct mac_gen_ctx *gctx = mac_gen_init_common(provctx, selection);
if (gctx != NULL && !mac_gen_set_params(gctx, params)) {
- OPENSSL_free(gctx);
+ mac_gen_cleanup(gctx);
gctx = NULL;
}
return gctx;
@@ -411,7 +411,7 @@
struct mac_gen_ctx *gctx = mac_gen_init_common(provctx, selection);
if (gctx != NULL && !cmac_gen_set_params(gctx, params)) {
- OPENSSL_free(gctx);
+ mac_gen_cleanup(gctx);
gctx = NULL;
}
return gctx;
diff --git a/crypto/openssl/providers/implementations/signature/eddsa_sig.c b/crypto/openssl/providers/implementations/signature/eddsa_sig.c
--- a/crypto/openssl/providers/implementations/signature/eddsa_sig.c
+++ b/crypto/openssl/providers/implementations/signature/eddsa_sig.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2020-2022 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2020-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -133,6 +133,7 @@
/* Should never happen */
ERR_raise(ERR_LIB_PROV, ERR_R_INTERNAL_ERROR);
ossl_ecx_key_free(edkey);
+ WPACKET_cleanup(&pkt);
return 0;
}
if (ret && WPACKET_finish(&pkt)) {
diff --git a/crypto/openssl/providers/implementations/storemgmt/file_store.c b/crypto/openssl/providers/implementations/storemgmt/file_store.c
--- a/crypto/openssl/providers/implementations/storemgmt/file_store.c
+++ b/crypto/openssl/providers/implementations/storemgmt/file_store.c
@@ -238,7 +238,7 @@
#ifdef _WIN32
/* Windows file: URIs with a drive letter start with a / */
if (p[0] == '/' && p[2] == ':' && p[3] == '/') {
- char c = tolower(p[1]);
+ char c = tolower((unsigned char)p[1]);
if (c >= 'a' && c <= 'z') {
p++;
diff --git a/crypto/openssl/ssl/statem/extensions_srvr.c b/crypto/openssl/ssl/statem/extensions_srvr.c
--- a/crypto/openssl/ssl/statem/extensions_srvr.c
+++ b/crypto/openssl/ssl/statem/extensions_srvr.c
@@ -1083,7 +1083,7 @@
if (sesstmp == NULL) {
SSLfatal(s, SSL_AD_INTERNAL_ERROR, ERR_R_INTERNAL_ERROR);
- return 0;
+ goto err;
}
SSL_SESSION_free(sess);
sess = sesstmp;
diff --git a/crypto/openssl/ssl/statem/statem_srvr.c b/crypto/openssl/ssl/statem/statem_srvr.c
--- a/crypto/openssl/ssl/statem/statem_srvr.c
+++ b/crypto/openssl/ssl/statem/statem_srvr.c
@@ -1,5 +1,5 @@
/*
- * Copyright 1995-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved.
* Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved
* Copyright 2005 Nokia. All rights reserved.
*
@@ -2985,7 +2985,7 @@
}
if (!EVP_PKEY_set1_encoded_public_key(ckey, data, i)) {
- SSLfatal(s, SSL_AD_INTERNAL_ERROR, ERR_R_INTERNAL_ERROR);
+ SSLfatal(s, SSL_AD_ILLEGAL_PARAMETER, SSL_R_BAD_KEY_SHARE);
goto err;
}
@@ -3039,7 +3039,7 @@
}
if (EVP_PKEY_set1_encoded_public_key(ckey, data, i) <= 0) {
- SSLfatal(s, SSL_AD_INTERNAL_ERROR, ERR_R_EC_LIB);
+ SSLfatal(s, SSL_AD_ILLEGAL_PARAMETER, SSL_R_BAD_KEY_SHARE);
goto err;
}
}
diff --git a/crypto/openssl/test/acvp_test.c b/crypto/openssl/test/acvp_test.c
--- a/crypto/openssl/test/acvp_test.c
+++ b/crypto/openssl/test/acvp_test.c
@@ -1251,7 +1251,7 @@
BN_CTX *bn_ctx = NULL;
const struct rsa_decrypt_prim_st *tst = &rsa_decrypt_prim_data[id];
- if (!TEST_ptr(pkey = EVP_PKEY_Q_keygen(libctx, NULL, "RSA", 2048))
+ if (!TEST_ptr(pkey = EVP_PKEY_Q_keygen(libctx, NULL, "RSA", (size_t)2048))
|| !TEST_true(pkey_get_bn_bytes(pkey, OSSL_PKEY_PARAM_RSA_N, &n, &n_len))
|| !TEST_true(pkey_get_bn_bytes(pkey, OSSL_PKEY_PARAM_RSA_E, &e, &e_len))
|| !TEST_ptr(ctx = EVP_PKEY_CTX_new_from_pkey(libctx, pkey, ""))
diff --git a/crypto/openssl/test/build.info b/crypto/openssl/test/build.info
--- a/crypto/openssl/test/build.info
+++ b/crypto/openssl/test/build.info
@@ -61,7 +61,7 @@
keymgmt_internal_test hexstr_test provider_status_test defltfips_test \
bio_readbuffer_test user_property_test pkcs7_test upcallstest \
provfetchtest prov_config_test rand_test fips_version_test \
- nodefltctxtest
+ nodefltctxtest bio_pw_callback_test
IF[{- !$disabled{'deprecated-3.0'} -}]
PROGRAMS{noinst}=enginetest
@@ -943,6 +943,10 @@
INCLUDE[ssl_ctx_test]=../include ../apps/include
DEPEND[ssl_ctx_test]=../libcrypto ../libssl libtestutil.a
+ SOURCE[bio_pw_callback_test]=bio_pw_callback_test.c
+ INCLUDE[bio_pw_callback_test]=../include ../apps/include
+ DEPEND[bio_pw_callback_test]=../libcrypto libtestutil.a
+
{-
use File::Spec::Functions;
use File::Basename;
diff --git a/crypto/openssl/test/cmactest.c b/crypto/openssl/test/cmactest.c
--- a/crypto/openssl/test/cmactest.c
+++ b/crypto/openssl/test/cmactest.c
@@ -196,13 +196,15 @@
return ret;
}
+#define OSSL_HEX_CHARS_PER_BYTE 2
static char *pt(unsigned char *md, unsigned int len)
{
unsigned int i;
- static char buf[80];
+ static char buf[81];
- for (i = 0; i < len; i++)
- sprintf(&(buf[i * 2]), "%02x", md[i]);
+ for (i = 0; i < len && (i + 1) * OSSL_HEX_CHARS_PER_BYTE < sizeof(buf); i++)
+ BIO_snprintf(buf + i * OSSL_HEX_CHARS_PER_BYTE,
+ OSSL_HEX_CHARS_PER_BYTE + 1, "%02x", md[i]);
return buf;
}
diff --git a/crypto/openssl/test/conf_include_test.c b/crypto/openssl/test/conf_include_test.c
--- a/crypto/openssl/test/conf_include_test.c
+++ b/crypto/openssl/test/conf_include_test.c
@@ -158,7 +158,7 @@
char max[(sizeof(long) * 8) / 3 + 3];
char *p;
- p = max + sprintf(max, "0%ld", LONG_MAX) - 1;
+ p = max + BIO_snprintf(max, sizeof(max), "0%ld", LONG_MAX) - 1;
setenv("FNORD", max, 1);
if (!TEST_true(NCONF_get_number(NULL, "missing", "FNORD", &val))
|| !TEST_long_eq(val, LONG_MAX))
diff --git a/crypto/openssl/test/drbgtest.c b/crypto/openssl/test/drbgtest.c
--- a/crypto/openssl/test/drbgtest.c
+++ b/crypto/openssl/test/drbgtest.c
@@ -423,7 +423,7 @@
presult[0].pindex = presult[1].pindex = i;
- sprintf(presult[0].name, "child %d", i);
+ BIO_snprintf(presult[0].name, sizeof(presult[0].name), "child %d", i);
strcpy(presult[1].name, presult[0].name);
/* collect the random output of the children */
diff --git a/crypto/openssl/test/ec_internal_test.c b/crypto/openssl/test/ec_internal_test.c
--- a/crypto/openssl/test/ec_internal_test.c
+++ b/crypto/openssl/test/ec_internal_test.c
@@ -155,6 +155,56 @@
}
#ifndef OPENSSL_NO_EC2M
+/* Test that decoding of invalid GF2m field parameters fails. */
+static int ec2m_field_sanity(void)
+{
+ int ret = 0;
+ BN_CTX *ctx = BN_CTX_new();
+ BIGNUM *p, *a, *b;
+ EC_GROUP *group1 = NULL, *group2 = NULL, *group3 = NULL;
+
+ TEST_info("Testing GF2m hardening\n");
+
+ BN_CTX_start(ctx);
+ p = BN_CTX_get(ctx);
+ a = BN_CTX_get(ctx);
+ if (!TEST_ptr(b = BN_CTX_get(ctx))
+ || !TEST_true(BN_one(a))
+ || !TEST_true(BN_one(b)))
+ goto out;
+
+ /* Even pentanomial value should be rejected */
+ if (!TEST_true(BN_set_word(p, 0xf2)))
+ goto out;
+ if (!TEST_ptr_null(group1 = EC_GROUP_new_curve_GF2m(p, a, b, ctx)))
+ TEST_error("Zero constant term accepted in GF2m polynomial");
+
+ /* Odd hexanomial should also be rejected */
+ if (!TEST_true(BN_set_word(p, 0xf3)))
+ goto out;
+ if (!TEST_ptr_null(group2 = EC_GROUP_new_curve_GF2m(p, a, b, ctx)))
+ TEST_error("Hexanomial accepted as GF2m polynomial");
+
+ /* Excessive polynomial degree should also be rejected */
+ if (!TEST_true(BN_set_word(p, 0x71))
+ || !TEST_true(BN_set_bit(p, OPENSSL_ECC_MAX_FIELD_BITS + 1)))
+ goto out;
+ if (!TEST_ptr_null(group3 = EC_GROUP_new_curve_GF2m(p, a, b, ctx)))
+ TEST_error("GF2m polynomial degree > %d accepted",
+ OPENSSL_ECC_MAX_FIELD_BITS);
+
+ ret = group1 == NULL && group2 == NULL && group3 == NULL;
+
+ out:
+ EC_GROUP_free(group1);
+ EC_GROUP_free(group2);
+ EC_GROUP_free(group3);
+ BN_CTX_end(ctx);
+ BN_CTX_free(ctx);
+
+ return ret;
+}
+
/* test EC_GF2m_simple_method directly */
static int field_tests_ec2_simple(void)
{
@@ -443,6 +493,7 @@
ADD_TEST(field_tests_ecp_simple);
ADD_TEST(field_tests_ecp_mont);
#ifndef OPENSSL_NO_EC2M
+ ADD_TEST(ec2m_field_sanity);
ADD_TEST(field_tests_ec2_simple);
#endif
ADD_ALL_TESTS(field_tests_default, crv_len);
diff --git a/crypto/openssl/test/enginetest.c b/crypto/openssl/test/enginetest.c
--- a/crypto/openssl/test/enginetest.c
+++ b/crypto/openssl/test/enginetest.c
@@ -147,9 +147,9 @@
TEST_info("About to beef up the engine-type list");
for (loop = 0; loop < NUMTOADD; loop++) {
- sprintf(buf, "id%d", loop);
+ BIO_snprintf(buf, sizeof(buf), "id%d", loop);
eid[loop] = OPENSSL_strdup(buf);
- sprintf(buf, "Fake engine type %d", loop);
+ BIO_snprintf(buf, sizeof(buf), "Fake engine type %d", loop);
ename[loop] = OPENSSL_strdup(buf);
if (!TEST_ptr(block[loop] = ENGINE_new())
|| !TEST_true(ENGINE_set_id(block[loop], eid[loop]))
diff --git a/crypto/openssl/test/evp_kdf_test.c b/crypto/openssl/test/evp_kdf_test.c
--- a/crypto/openssl/test/evp_kdf_test.c
+++ b/crypto/openssl/test/evp_kdf_test.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2018-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2018-2025 The OpenSSL Project Authors. All Rights Reserved.
* Copyright (c) 2018-2020, Oracle and/or its affiliates. All rights reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
@@ -857,7 +857,7 @@
#ifndef OPENSSL_NO_SCRYPT
static int test_kdf_scrypt(void)
{
- int ret;
+ int i, ret;
EVP_KDF_CTX *kctx;
OSSL_PARAM params[7], *p = params;
unsigned char out[64];
@@ -883,15 +883,21 @@
*p++ = OSSL_PARAM_construct_uint(OSSL_KDF_PARAM_SCRYPT_MAXMEM, &maxmem);
*p = OSSL_PARAM_construct_end();
- ret =
- TEST_ptr(kctx = get_kdfbyname(OSSL_KDF_NAME_SCRYPT))
- && TEST_true(EVP_KDF_CTX_set_params(kctx, params))
- /* failure test *//*
- && TEST_int_le(EVP_KDF_derive(kctx, out, sizeof(out), NULL), 0)*/
- && TEST_true(OSSL_PARAM_set_uint(p - 1, 10 * 1024 * 1024))
- && TEST_true(EVP_KDF_CTX_set_params(kctx, p - 1))
- && TEST_int_gt(EVP_KDF_derive(kctx, out, sizeof(out), NULL), 0)
- && TEST_mem_eq(out, sizeof(out), expected, sizeof(expected));
+ ret = TEST_ptr(kctx = get_kdfbyname(OSSL_KDF_NAME_SCRYPT));
+ for (i = 0; ret && i < 2; ++i) {
+ ret = ret
+ && TEST_true(EVP_KDF_CTX_set_params(kctx, params));
+ if (i == 0)
+ ret = ret
+ && TEST_int_le(EVP_KDF_derive(kctx, out, sizeof(out), NULL), 0)
+ && TEST_true(OSSL_PARAM_set_uint(p - 1, 10 * 1024 * 1024))
+ && TEST_true(EVP_KDF_CTX_set_params(kctx, p - 1));
+ ret = ret
+ && TEST_int_gt(EVP_KDF_derive(kctx, out, sizeof(out), NULL), 0)
+ && TEST_mem_eq(out, sizeof(out), expected, sizeof(expected));
+ if (i == 0)
+ EVP_KDF_CTX_reset(kctx);
+ }
EVP_KDF_CTX_free(kctx);
return ret;
diff --git a/crypto/openssl/test/evp_libctx_test.c b/crypto/openssl/test/evp_libctx_test.c
--- a/crypto/openssl/test/evp_libctx_test.c
+++ b/crypto/openssl/test/evp_libctx_test.c
@@ -501,7 +501,7 @@
size_t len = 0;
OSSL_ENCODER_CTX *ectx = NULL;
- if (!TEST_ptr(*priv = EVP_PKEY_Q_keygen(libctx, NULL, "RSA", bits))
+ if (!TEST_ptr(*priv = EVP_PKEY_Q_keygen(libctx, NULL, "RSA", (size_t)bits))
|| !TEST_ptr(ectx =
OSSL_ENCODER_CTX_new_for_pkey(*priv,
EVP_PKEY_PUBLIC_KEY,
@@ -536,6 +536,8 @@
&& TEST_int_eq(EVP_PKEY_encapsulate_init(sctx, NULL), 1)
&& TEST_int_eq(EVP_PKEY_CTX_set_kem_op(sctx, "RSASVE"), 1)
&& TEST_ptr(dctx = EVP_PKEY_CTX_dup(sctx))
+ /* Test that providing a NULL wrappedlen fails */
+ && TEST_int_eq(EVP_PKEY_encapsulate(dctx, NULL, NULL, NULL, NULL), 0)
&& TEST_int_eq(EVP_PKEY_encapsulate(dctx, NULL, &ctlen, NULL,
&secretlen), 1)
&& TEST_int_eq(ctlen, secretlen)
@@ -545,11 +547,26 @@
&& TEST_ptr(rctx = EVP_PKEY_CTX_new_from_pkey(libctx, priv, NULL))
&& TEST_int_eq(EVP_PKEY_decapsulate_init(rctx, NULL), 1)
&& TEST_int_eq(EVP_PKEY_CTX_set_kem_op(rctx, "RSASVE"), 1)
+ /* Test that providing a NULL unwrappedlen fails */
+ && TEST_int_eq(EVP_PKEY_decapsulate(rctx, NULL, NULL, ct, ctlen), 0)
&& TEST_int_eq(EVP_PKEY_decapsulate(rctx, NULL, &unwraplen,
ct, ctlen), 1)
&& TEST_int_eq(EVP_PKEY_decapsulate(rctx, unwrap, &unwraplen,
ct, ctlen), 1)
&& TEST_mem_eq(unwrap, unwraplen, secret, secretlen);
+
+ /* Test that providing a too short unwrapped/ctlen fails */
+ if (fips_provider_version_match(libctx, ">=3.4.0")) {
+ ctlen = 1;
+ if (!TEST_int_eq(EVP_PKEY_encapsulate(dctx, ct, &ctlen, secret,
+ &secretlen), 0))
+ ret = 0;
+ unwraplen = 1;
+ if (!TEST_int_eq(EVP_PKEY_decapsulate(rctx, unwrap, &unwraplen, ct,
+ ctlen), 0))
+ ret = 0;
+ }
+
EVP_PKEY_free(pub);
EVP_PKEY_free(priv);
EVP_PKEY_CTX_free(rctx);
@@ -596,59 +613,60 @@
size_t ctlen = 0, secretlen = 0;
ret = TEST_true(rsa_keygen(2048, &pub, &priv))
- && TEST_ptr(pubctx = EVP_PKEY_CTX_new_from_pkey(libctx, pub, NULL))
- && TEST_ptr(privctx = EVP_PKEY_CTX_new_from_pkey(libctx, priv, NULL))
- /* Test setting kem op before the init fails */
- && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, "RSASVE"), -2)
- /* Test NULL ctx passed */
- && TEST_int_eq(EVP_PKEY_encapsulate_init(NULL, NULL), 0)
- && TEST_int_eq(EVP_PKEY_encapsulate(NULL, NULL, NULL, NULL, NULL), 0)
- && TEST_int_eq(EVP_PKEY_decapsulate_init(NULL, NULL), 0)
- && TEST_int_eq(EVP_PKEY_decapsulate(NULL, NULL, NULL, NULL, 0), 0)
- /* Test Invalid operation */
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, NULL, NULL, NULL), -1)
- && TEST_int_eq(EVP_PKEY_decapsulate(privctx, NULL, NULL, NULL, 0), 0)
- /* Wrong key component - no secret should be returned on failure */
- && TEST_int_eq(EVP_PKEY_decapsulate_init(pubctx, NULL), 1)
- && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, "RSASVE"), 1)
- && TEST_int_eq(EVP_PKEY_decapsulate(pubctx, secret, &secretlen, ct,
- sizeof(ct)), 0)
- && TEST_uchar_eq(secret[0], 0)
- /* Test encapsulate fails if the mode is not set */
- && TEST_int_eq(EVP_PKEY_encapsulate_init(pubctx, NULL), 1)
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, &ctlen, secret, &secretlen), -2)
- /* Test setting a bad kem ops fail */
- && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, "RSA"), 0)
- && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, NULL), 0)
- && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(NULL, "RSASVE"), 0)
- && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(NULL, NULL), 0)
- /* Test secretlen is optional */
- && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, "RSASVE"), 1)
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, &ctlen, secret, NULL), 1)
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, &ctlen, NULL, NULL), 1)
- /* Test outlen is optional */
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, NULL, NULL, &secretlen), 1)
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, NULL, secret, &secretlen), 1)
- /* test that either len must be set if out is NULL */
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, NULL, NULL, NULL), 0)
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, &ctlen, NULL, NULL), 1)
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, NULL, NULL, &secretlen), 1)
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, &ctlen, NULL, &secretlen), 1)
- /* Secret buffer should be set if there is an output buffer */
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, &ctlen, NULL, NULL), 0)
- /* Test that lengths are optional if ct is not NULL */
- && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, NULL, secret, NULL), 1)
- /* Pass if secret or secret length are not NULL */
- && TEST_int_eq(EVP_PKEY_decapsulate_init(privctx, NULL), 1)
- && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(privctx, "RSASVE"), 1)
- && TEST_int_eq(EVP_PKEY_decapsulate(privctx, secret, NULL, ct, sizeof(ct)), 1)
- && TEST_int_eq(EVP_PKEY_decapsulate(privctx, NULL, &secretlen, ct, sizeof(ct)), 1)
- && TEST_int_eq(secretlen, 256)
- /* Fail if passed NULL arguments */
- && TEST_int_eq(EVP_PKEY_decapsulate(privctx, NULL, NULL, ct, sizeof(ct)), 0)
- && TEST_int_eq(EVP_PKEY_decapsulate(privctx, secret, &secretlen, NULL, 0), 0)
- && TEST_int_eq(EVP_PKEY_decapsulate(privctx, secret, &secretlen, NULL, sizeof(ct)), 0)
- && TEST_int_eq(EVP_PKEY_decapsulate(privctx, secret, &secretlen, ct, 0), 0);
+ && TEST_ptr(pubctx = EVP_PKEY_CTX_new_from_pkey(libctx, pub, NULL))
+ && TEST_ptr(privctx = EVP_PKEY_CTX_new_from_pkey(libctx, priv, NULL))
+ /* Test setting kem op before the init fails */
+ && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, "RSASVE"), -2)
+ /* Test NULL ctx passed */
+ && TEST_int_eq(EVP_PKEY_encapsulate_init(NULL, NULL), 0)
+ && TEST_int_eq(EVP_PKEY_encapsulate(NULL, NULL, NULL, NULL, NULL), 0)
+ && TEST_int_eq(EVP_PKEY_decapsulate_init(NULL, NULL), 0)
+ && TEST_int_eq(EVP_PKEY_decapsulate(NULL, NULL, NULL, NULL, 0), 0)
+ /* Test Invalid operation */
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, NULL, NULL, NULL), -1)
+ && TEST_int_eq(EVP_PKEY_decapsulate(privctx, NULL, NULL, NULL, 0), 0)
+ /* Wrong key component - no secret should be returned on failure */
+ && TEST_int_eq(EVP_PKEY_decapsulate_init(pubctx, NULL), 1)
+ && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, "RSASVE"), 1)
+ && TEST_int_eq(EVP_PKEY_decapsulate(pubctx, secret, &secretlen, ct,
+ sizeof(ct)), 0)
+ && TEST_uchar_eq(secret[0], 0)
+ /* Test encapsulate fails if the mode is not set */
+ && TEST_int_eq(EVP_PKEY_encapsulate_init(pubctx, NULL), 1)
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, &ctlen, secret, &secretlen), -2)
+ /* Test setting a bad kem ops fail */
+ && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, "RSA"), 0)
+ && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, NULL), 0)
+ && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(NULL, "RSASVE"), 0)
+ && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(NULL, NULL), 0)
+ /* Test secretlen is optional */
+ && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(pubctx, "RSASVE"), 1)
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, &ctlen, NULL, NULL), 1)
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, &ctlen, secret, NULL), 1)
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, &ctlen, NULL, NULL), 1)
+ /* Test outlen is optional */
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, NULL, NULL, &secretlen), 1)
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, NULL, secret, &secretlen), 1)
+ /* test that either len must be set if out is NULL */
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, NULL, NULL, NULL), 0)
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, &ctlen, NULL, NULL), 1)
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, NULL, NULL, &secretlen), 1)
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, NULL, &ctlen, NULL, &secretlen), 1)
+ /* Secret buffer should be set if there is an output buffer */
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, &ctlen, NULL, NULL), 0)
+ /* Test that lengths are optional if ct is not NULL */
+ && TEST_int_eq(EVP_PKEY_encapsulate(pubctx, ct, NULL, secret, NULL), 1)
+ /* Pass if secret or secret length are not NULL */
+ && TEST_int_eq(EVP_PKEY_decapsulate_init(privctx, NULL), 1)
+ && TEST_int_eq(EVP_PKEY_CTX_set_kem_op(privctx, "RSASVE"), 1)
+ && TEST_int_eq(EVP_PKEY_decapsulate(privctx, secret, NULL, ct, sizeof(ct)), 1)
+ && TEST_int_eq(EVP_PKEY_decapsulate(privctx, NULL, &secretlen, ct, sizeof(ct)), 1)
+ && TEST_int_eq(secretlen, 256)
+ /* Fail if passed NULL arguments */
+ && TEST_int_eq(EVP_PKEY_decapsulate(privctx, NULL, NULL, ct, sizeof(ct)), 0)
+ && TEST_int_eq(EVP_PKEY_decapsulate(privctx, secret, &secretlen, NULL, 0), 0)
+ && TEST_int_eq(EVP_PKEY_decapsulate(privctx, secret, &secretlen, NULL, sizeof(ct)), 0)
+ && TEST_int_eq(EVP_PKEY_decapsulate(privctx, secret, &secretlen, ct, 0), 0);
EVP_PKEY_free(pub);
EVP_PKEY_free(priv);
diff --git a/crypto/openssl/test/hmactest.c b/crypto/openssl/test/hmactest.c
--- a/crypto/openssl/test/hmactest.c
+++ b/crypto/openssl/test/hmactest.c
@@ -275,19 +275,21 @@
return res;
}
-# ifndef OPENSSL_NO_MD5
+#ifndef OPENSSL_NO_MD5
+# define OSSL_HEX_CHARS_PER_BYTE 2
static char *pt(unsigned char *md, unsigned int len)
{
unsigned int i;
- static char buf[80];
+ static char buf[201];
if (md == NULL)
return NULL;
- for (i = 0; i < len; i++)
- sprintf(&(buf[i * 2]), "%02x", md[i]);
+ for (i = 0; i < len && (i + 1) * OSSL_HEX_CHARS_PER_BYTE < sizeof(buf); i++)
+ BIO_snprintf(buf + i * OSSL_HEX_CHARS_PER_BYTE,
+ OSSL_HEX_CHARS_PER_BYTE + 1, "%02x", md[i]);
return buf;
}
-# endif
+#endif
int setup_tests(void)
{
diff --git a/crypto/openssl/test/memleaktest.c b/crypto/openssl/test/memleaktest.c
--- a/crypto/openssl/test/memleaktest.c
+++ b/crypto/openssl/test/memleaktest.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2016-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2016-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -44,7 +44,7 @@
*/
int exitcode = EXIT_FAILURE;
#endif
- char *lost;
+ char *volatile lost;
lost = OPENSSL_malloc(3);
if (!TEST_ptr(lost))
diff --git a/crypto/openssl/test/p_test.c b/crypto/openssl/test/p_test.c
--- a/crypto/openssl/test/p_test.c
+++ b/crypto/openssl/test/p_test.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2019-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2019-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -16,6 +16,8 @@
#include <string.h>
#include <stdio.h>
+#include <stdarg.h>
+
/*
* When built as an object file to link the application with, we get the
* init function name through the macro PROVIDER_INIT_FUNCTION_NAME. If
@@ -46,6 +48,7 @@
static OSSL_FUNC_core_new_error_fn *c_new_error;
static OSSL_FUNC_core_set_error_debug_fn *c_set_error_debug;
static OSSL_FUNC_core_vset_error_fn *c_vset_error;
+static OSSL_FUNC_BIO_vsnprintf_fn *c_BIO_vsnprintf;
/* Tell the core what params we provide and what type they are */
static const OSSL_PARAM p_param_types[] = {
@@ -60,6 +63,17 @@
static OSSL_FUNC_provider_get_reason_strings_fn p_get_reason_strings;
static OSSL_FUNC_provider_teardown_fn p_teardown;
+static int local_snprintf(char *buf, size_t n, const char *format, ...)
+{
+ va_list args;
+ int ret;
+
+ va_start(args, format);
+ ret = (*c_BIO_vsnprintf)(buf, n, format, args);
+ va_end(args);
+ return ret;
+}
+
static void p_set_error(int lib, int reason, const char *file, int line,
const char *func, const char *fmt, ...)
{
@@ -114,11 +128,11 @@
const char *versionp = *(void **)counter_request[0].data;
const char *namep = *(void **)counter_request[1].data;
- sprintf(buf, "Hello OpenSSL %.20s, greetings from %s!",
- versionp, namep);
+ local_snprintf(buf, sizeof(buf), "Hello OpenSSL %.20s, greetings from %s!",
+ versionp, namep);
}
} else {
- sprintf(buf, "Howdy stranger...");
+ local_snprintf(buf, sizeof(buf), "Howdy stranger...");
}
p->return_size = buf_l = strlen(buf) + 1;
@@ -216,12 +230,21 @@
return reason_strings;
}
+static const OSSL_ALGORITHM *p_query(OSSL_PROVIDER *prov,
+ int operation_id,
+ int *no_cache)
+{
+ *no_cache = 1;
+ return NULL;
+}
+
static const OSSL_DISPATCH p_test_table[] = {
{ OSSL_FUNC_PROVIDER_GETTABLE_PARAMS, (void (*)(void))p_gettable_params },
{ OSSL_FUNC_PROVIDER_GET_PARAMS, (void (*)(void))p_get_params },
{ OSSL_FUNC_PROVIDER_GET_REASON_STRINGS,
(void (*)(void))p_get_reason_strings},
{ OSSL_FUNC_PROVIDER_TEARDOWN, (void (*)(void))p_teardown },
+ { OSSL_FUNC_PROVIDER_QUERY_OPERATION, (void (*)(void))p_query },
{ 0, NULL }
};
@@ -250,6 +273,9 @@
case OSSL_FUNC_CORE_VSET_ERROR:
c_vset_error = OSSL_FUNC_core_vset_error(in);
break;
+ case OSSL_FUNC_BIO_VSNPRINTF:
+ c_BIO_vsnprintf = OSSL_FUNC_BIO_vsnprintf(in);
+ break;
default:
/* Just ignore anything we don't understand */
break;
diff --git a/crypto/openssl/test/pkcs12_format_test.c b/crypto/openssl/test/pkcs12_format_test.c
--- a/crypto/openssl/test/pkcs12_format_test.c
+++ b/crypto/openssl/test/pkcs12_format_test.c
@@ -358,7 +358,8 @@
char fname[80];
PKCS12_BUILDER *pb;
- sprintf(fname, "1key_ciph-%s_iter-%d.p12", OBJ_nid2sn(enc->nid), enc->iter);
+ BIO_snprintf(fname, sizeof(fname), "1key_ciph-%s_iter-%d.p12",
+ OBJ_nid2sn(enc->nid), enc->iter);
pb = new_pkcs12_builder(fname);
@@ -457,7 +458,8 @@
char fname[80];
PKCS12_BUILDER *pb;
- sprintf(fname, "1cert_mac-%s_iter-%d.p12", OBJ_nid2sn(mac->nid), mac->iter);
+ BIO_snprintf(fname, sizeof(fname), "1cert_mac-%s_iter-%d.p12",
+ OBJ_nid2sn(mac->nid), mac->iter);
pb = new_pkcs12_builder(fname);
@@ -617,7 +619,8 @@
char fname[80];
PKCS12_BUILDER *pb;
- sprintf(fname, "1secret_ciph-%s_iter-%d.p12", OBJ_nid2sn(enc->nid), enc->iter);
+ BIO_snprintf(fname, sizeof(fname), "1secret_ciph-%s_iter-%d.p12",
+ OBJ_nid2sn(enc->nid), enc->iter);
pb = new_pkcs12_builder(fname);
custom_nid = get_custom_oid();
diff --git a/crypto/openssl/test/property_test.c b/crypto/openssl/test/property_test.c
--- a/crypto/openssl/test/property_test.c
+++ b/crypto/openssl/test/property_test.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2019-2023 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2019-2025 The OpenSSL Project Authors. All Rights Reserved.
* Copyright (c) 2019, Oracle and/or its affiliates. All rights reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
@@ -50,30 +50,37 @@
static int test_property_string(void)
{
- OSSL_METHOD_STORE *store;
+ OSSL_LIB_CTX *ctx;
+ OSSL_METHOD_STORE *store = NULL;
int res = 0;
OSSL_PROPERTY_IDX i, j;
- if (TEST_ptr(store = ossl_method_store_new(NULL))
- && TEST_int_eq(ossl_property_name(NULL, "fnord", 0), 0)
- && TEST_int_ne(ossl_property_name(NULL, "fnord", 1), 0)
- && TEST_int_ne(ossl_property_name(NULL, "name", 1), 0)
+ /*-
+ * Use our own library context because we depend on ordering from a
+ * pristine state.
+ */
+ if (TEST_ptr(ctx = OSSL_LIB_CTX_new())
+ && TEST_ptr(store = ossl_method_store_new(ctx))
+ && TEST_int_eq(ossl_property_name(ctx, "fnord", 0), 0)
+ && TEST_int_ne(ossl_property_name(ctx, "fnord", 1), 0)
+ && TEST_int_ne(ossl_property_name(ctx, "name", 1), 0)
/* Property value checks */
- && TEST_int_eq(ossl_property_value(NULL, "fnord", 0), 0)
- && TEST_int_ne(i = ossl_property_value(NULL, "no", 0), 0)
- && TEST_int_ne(j = ossl_property_value(NULL, "yes", 0), 0)
+ && TEST_int_eq(ossl_property_value(ctx, "fnord", 0), 0)
+ && TEST_int_ne(i = ossl_property_value(ctx, "no", 0), 0)
+ && TEST_int_ne(j = ossl_property_value(ctx, "yes", 0), 0)
&& TEST_int_ne(i, j)
- && TEST_int_eq(ossl_property_value(NULL, "yes", 1), j)
- && TEST_int_eq(ossl_property_value(NULL, "no", 1), i)
- && TEST_int_ne(i = ossl_property_value(NULL, "illuminati", 1), 0)
- && TEST_int_eq(j = ossl_property_value(NULL, "fnord", 1), i + 1)
- && TEST_int_eq(ossl_property_value(NULL, "fnord", 1), j)
+ && TEST_int_eq(ossl_property_value(ctx, "yes", 1), j)
+ && TEST_int_eq(ossl_property_value(ctx, "no", 1), i)
+ && TEST_int_ne(i = ossl_property_value(ctx, "illuminati", 1), 0)
+ && TEST_int_eq(j = ossl_property_value(ctx, "fnord", 1), i + 1)
+ && TEST_int_eq(ossl_property_value(ctx, "fnord", 1), j)
/* Check name and values are distinct */
- && TEST_int_eq(ossl_property_value(NULL, "cold", 0), 0)
- && TEST_int_ne(ossl_property_name(NULL, "fnord", 0),
- ossl_property_value(NULL, "fnord", 0)))
+ && TEST_int_eq(ossl_property_value(ctx, "cold", 0), 0)
+ && TEST_int_ne(ossl_property_name(ctx, "fnord", 0),
+ ossl_property_value(ctx, "fnord", 0)))
res = 1;
ossl_method_store_free(store);
+ OSSL_LIB_CTX_free(ctx);
return res;
}
diff --git a/crypto/openssl/test/recipes/03-test_fipsinstall.t b/crypto/openssl/test/recipes/03-test_fipsinstall.t
--- a/crypto/openssl/test/recipes/03-test_fipsinstall.t
+++ b/crypto/openssl/test/recipes/03-test_fipsinstall.t
@@ -253,6 +253,10 @@
SKIP: {
skip "Skipping Asymmetric RSA corruption test because of no rsa in this build", 1
if disabled("rsa");
+ run(test(["fips_version_test", "-config", $provconf, "<3.5.0"]),
+ capture => 1, statusvar => \my $exit);
+ skip "FIPS provider version is too new for Asymmetric RSA corruption test", 1
+ if !$exit;
ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.cnf', '-module', $infile,
'-corrupt_desc', 'RSA_Encrypt',
'-corrupt_type', 'KAT_AsymmetricCipher'])),
diff --git a/crypto/openssl/test/recipes/04-test_encoder_decoder.t b/crypto/openssl/test/recipes/04-test_encoder_decoder.t
--- a/crypto/openssl/test/recipes/04-test_encoder_decoder.t
+++ b/crypto/openssl/test/recipes/04-test_encoder_decoder.t
@@ -25,9 +25,26 @@
my $rsa_key = srctop_file("test", "certs", "ee-key.pem");
my $pss_key = srctop_file("test", "certs", "ca-pss-key.pem");
-plan tests => ($no_fips ? 0 : 1) + 2; # FIPS install test + test
+plan tests => ($no_fips ? 0 : 3) + 2; # FIPS install test + test
my $conf = srctop_file("test", "default.cnf");
+
+# Check if the specified pattern occurs in the given file
+# Returns 1 if the pattern is found and 0 if not
+sub find_line_file {
+ my ($key, $file) = @_;
+
+ open(my $in, $file) or return -1;
+ while (my $line = <$in>) {
+ if ($line =~ /$key/) {
+ close($in);
+ return 1;
+ }
+ }
+ close($in);
+ return 0;
+}
+
ok(run(test(["endecode_test", "-rsa", $rsa_key,
"-pss", $pss_key,
"-config", $conf,
@@ -47,5 +64,13 @@
"-pss", $pss_key,
"-config", $conf,
"-provider", "fips"])));
+SKIP: {
+ skip "EC disabled", 2 if disabled("ec");
+ ok(run(app([ 'openssl', 'genpkey', '-algorithm', 'EC',
+ '-pkeyopt', 'group:P-256', '-text',
+ '-config', $conf, '-provider', 'fips', '-out', 'ec.txt' ])),
+ 'Print a FIPS provider EC private key');
+ ok(find_line_file('NIST CURVE: P-256', 'ec.txt') == 1,
+ 'Printing an FIPS provider EC private key');
+}
}
-
diff --git a/crypto/openssl/test/recipes/25-test_verify.t b/crypto/openssl/test/recipes/25-test_verify.t
--- a/crypto/openssl/test/recipes/25-test_verify.t
+++ b/crypto/openssl/test/recipes/25-test_verify.t
@@ -61,7 +61,7 @@
ok(verify("ee-cert", "sslserver", [qw(sroot-cert)], [qw(ca-cert)]),
"accept server purpose");
ok(!verify("ee-cert", "sslserver", [qw(croot-cert)], [qw(ca-cert)]),
- "fail client purpose");
+ "fail client purpose"); # beware, questionable non-standard EKU check on trust anchor
ok(verify("ee-cert", "sslserver", [qw(root+serverAuth)], [qw(ca-cert)]),
"accept server trust");
ok(verify("ee-cert", "sslserver", [qw(sroot+serverAuth)], [qw(ca-cert)]),
@@ -81,7 +81,7 @@
ok(verify("ee-cert", "sslserver", [qw(sroot-clientAuth)], [qw(ca-cert)]),
"accept client mistrust with server purpose");
ok(!verify("ee-cert", "sslserver", [qw(croot-clientAuth)], [qw(ca-cert)]),
- "fail client mistrust with client purpose");
+ "fail client mistrust with client purpose"); # beware, questionable non-standard EKU check on trust anchor
# Inapplicable trust
ok(!verify("ee-cert", "sslserver", [qw(root+clientAuth)], [qw(ca-cert)]),
"fail client trust");
@@ -150,7 +150,7 @@
ok(verify("ee-cert", "sslserver", [qw(sca-cert)], [], "-partial_chain"),
"accept partial chain with server purpose");
ok(!verify("ee-cert", "sslserver", [qw(cca-cert)], [], "-partial_chain"),
- "fail partial chain with client purpose");
+ "fail partial chain with client purpose"); # beware, questionable non-standard EKU check on trust anchor
ok(verify("ee-cert", "sslserver", [qw(ca+serverAuth)], [], "-partial_chain"),
"accept server trust partial chain");
ok(verify("ee-cert", "sslserver", [qw(cca+serverAuth)], [], "-partial_chain"),
@@ -188,7 +188,7 @@
ok(verify("ee-cert", "sslserver", [qw(root-cert cca+anyEKU)], [qw(ca-cert)]),
"accept wildcard trust and client purpose");
ok(!verify("ee-cert", "sslserver", [qw(root-cert cca-cert)], [qw(ca-cert)]),
- "fail client purpose");
+ "fail client purpose intermediate trusted"); # beware, questionable non-standard EKU check on trust anchor
ok(!verify("ee-cert", "sslserver", [qw(root-cert ca-anyEKU)], [qw(ca-cert)]),
"fail wildcard mistrust");
ok(!verify("ee-cert", "sslserver", [qw(root-cert ca-serverAuth)], [qw(ca-cert)]),
diff --git a/crypto/openssl/test/recipes/30-test_evp_data/evpkdf_tls13_kdf.txt b/crypto/openssl/test/recipes/30-test_evp_data/evpkdf_tls13_kdf.txt
--- a/crypto/openssl/test/recipes/30-test_evp_data/evpkdf_tls13_kdf.txt
+++ b/crypto/openssl/test/recipes/30-test_evp_data/evpkdf_tls13_kdf.txt
@@ -4935,3 +4935,13 @@
Ctrl.digest = digest:SHA256
Result = KDF_CTRL_ERROR
+# Test that salt of arbitrary length works
+FIPSversion = >=3.4.0
+KDF = TLS13-KDF
+Ctrl.mode = mode:EXTRACT_ONLY
+Ctrl.digest = digest:SHA2-256
+Ctrl.key = hexkey:f8af6aea2d397baf2948a25b2834200692cff17eee9165e4e27babee9edefd05
+Ctrl.salt = hexsalt:00010203040506070809000102030405060708090001020304050607080900010203040506070809
+Ctrl.prefix = hexprefix:746c73313320
+Ctrl.label = hexlabel:64657269766564
+Output = ef0aa4925ab6f4588759e15dfadcf7602ca7aa39ebb092bd7ab48f6a68c54449
diff --git a/crypto/openssl/test/recipes/80-test_cmp_http.t b/crypto/openssl/test/recipes/80-test_cmp_http.t
--- a/crypto/openssl/test/recipes/80-test_cmp_http.t
+++ b/crypto/openssl/test/recipes/80-test_cmp_http.t
@@ -1,5 +1,5 @@
#! /usr/bin/env perl
-# Copyright 2007-2022 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2007-2025 The OpenSSL Project Authors. All Rights Reserved.
# Copyright Nokia 2007-2019
# Copyright Siemens AG 2015-2019
#
@@ -270,7 +270,7 @@
print "Current directory is ".getcwd()."\n";
print "Launching mock server: $cmd\n";
die "Invalid port: $server_port" unless $server_port =~ m/^\d+$/;
- my $pid = open($server_fh, "$cmd|") or die "Trying to $cmd";
+ my $pid = open($server_fh, "$cmd 2>".result_dir()."/error.txt |") or die "Trying to $cmd";
print "Pid is: $pid\n";
if ($server_port == 0) {
# Find out the actual server port
diff --git a/crypto/openssl/test/recipes/80-test_cmp_http_data/test_connection.csv b/crypto/openssl/test/recipes/80-test_cmp_http_data/test_connection.csv
--- a/crypto/openssl/test/recipes/80-test_cmp_http_data/test_connection.csv
+++ b/crypto/openssl/test/recipes/80-test_cmp_http_data/test_connection.csv
@@ -2,8 +2,8 @@
,Message transfer options:,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,
1,default config, -section,,,,,,,,BLANK,,,,BLANK,,BLANK,,BLANK,
-TBD,Domain name, -section,, -server,_SERVER_CN:_SERVER_PORT,,,,,,,,,,,,,,
-TBD,IP address, -section,, -server,_SERVER_IP:_SERVER_PORT,,,,,,,,,,,,,,
+1,disabled as not supported by some host IP configurations: server domain name, -section,, -server,localhost:_SERVER_PORT,,,,,,,,,,,,,,
+1,disabled as not supported by some host IP configurations: server IPv6 address, -section,, -server,[::1]:_SERVER_PORT,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,
0,wrong server, -section,, -server,xn--rksmrgs-5wao1o.example.com:_SERVER_PORT,,,,,BLANK,,,, -msg_timeout,1,BLANK,,BLANK,
0,wrong server port, -section,, -server,_SERVER_HOST:99,,,,,BLANK,,,, -msg_timeout,1,BLANK,,BLANK,
diff --git a/crypto/openssl/test/recipes/80-test_cms.t b/crypto/openssl/test/recipes/80-test_cms.t
--- a/crypto/openssl/test/recipes/80-test_cms.t
+++ b/crypto/openssl/test/recipes/80-test_cms.t
@@ -1,5 +1,5 @@
#! /usr/bin/env perl
-# Copyright 2015-2023 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2015-2025 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
@@ -25,6 +25,7 @@
use lib bldtop_dir('.');
my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
+my $old_fips = 0;
plan skip_all => "CMS is not supported by this OpenSSL build"
if disabled("cms");
@@ -50,13 +51,17 @@
$no_rc2 = 1 if disabled("legacy");
-plan tests => 19;
+plan tests => 20;
ok(run(test(["pkcs7_test"])), "test pkcs7");
unless ($no_fips) {
- @config = ( "-config", srctop_file("test", "fips-and-base.cnf") );
+ my $provconf = srctop_file("test", "fips-and-base.cnf");
+ @config = ( "-config", $provconf );
$provname = 'fips';
+
+ run(test(["fips_version_test", "-config", $provconf, "<3.4.0"]),
+ capture => 1, statusvar => $old_fips);
}
$ENV{OPENSSL_TEST_LIBCTX} = "1";
@@ -394,6 +399,13 @@
"-out", "{output}.txt" ],
\&final_compare
],
+
+ [ "encrypted content test streaming PEM format -noout, 128 bit AES key",
+ [ "{cmd1}", @prov, "-EncryptedData_encrypt", "-in", $smcont, "-outform", "PEM",
+ "-aes128", "-secretkey", "000102030405060708090A0B0C0D0E0F",
+ "-stream", "-noout" ],
+ [ "{cmd2}", @prov, "-help" ]
+ ],
);
my @smime_cms_cades_tests = (
@@ -604,6 +616,7 @@
"-stream", "-out", "{output}.cms",
"-recip", catfile($smdir, "smec1.pem"), "-aes128",
"-keyopt", "ecdh_kdf_md:sha256" ],
+ sub { my %opts = @_; smimeType_matches("$opts{output}.cms", "enveloped-data"); },
[ "{cmd2}", @prov, "-decrypt", "-recip", catfile($smdir, "smec1.pem"),
"-in", "{output}.cms", "-out", "{output}.txt" ],
\&final_compare
@@ -613,6 +626,7 @@
[ "{cmd1}", @prov, "-encrypt", "-in", $smcont,
"-stream", "-out", "{output}.cms",
"-recip", catfile($smdir, "smec1.pem"), "-aes-128-gcm", "-keyopt", "ecdh_kdf_md:sha256" ],
+ sub { my %opts = @_; smimeType_matches("$opts{output}.cms", "authEnveloped-data"); },
[ "{cmd2}", "-decrypt", "-recip", catfile($smdir, "smec1.pem"),
"-in", "{output}.cms", "-out", "{output}.txt" ],
\&final_compare
@@ -626,18 +640,23 @@
[ "{cmd2}", @prov, "-decrypt", "-recip", catfile($smdir, "smec2.pem"),
"-in", "{output}.cms", "-out", "{output}.txt" ],
\&final_compare
- ],
-
- [ "enveloped content test streaming S/MIME format, X9.42 DH",
- [ "{cmd1}", @prov, "-encrypt", "-in", $smcont,
- "-stream", "-out", "{output}.cms",
- "-recip", catfile($smdir, "smdh.pem"), "-aes128" ],
- [ "{cmd2}", @prov, "-decrypt", "-recip", catfile($smdir, "smdh.pem"),
- "-in", "{output}.cms", "-out", "{output}.txt" ],
- \&final_compare
]
);
+if ($no_fips || $old_fips) {
+ # Only SHA1 supported in dh_cms_encrypt()
+ push(@smime_cms_param_tests,
+ [ "enveloped content test streaming S/MIME format, X9.42 DH",
+ [ "{cmd1}", @prov, "-encrypt", "-in", $smcont,
+ "-stream", "-out", "{output}.cms",
+ "-recip", catfile($smdir, "smdh.pem"), "-aes128" ],
+ [ "{cmd2}", @prov, "-decrypt", "-recip", catfile($smdir, "smdh.pem"),
+ "-in", "{output}.cms", "-out", "{output}.txt" ],
+ \&final_compare
+ ]
+ );
+}
+
my @contenttype_cms_test = (
[ "signed content test - check that content type is added to additional signerinfo, RSA keys",
[ "{cmd1}", @prov, "-sign", "-binary", "-nodetach", "-stream", "-in", $smcont,
@@ -765,6 +784,28 @@
return scalar(@c);
}
+# Returns 1 if the smime-type matches the passed parameter, otherwise 0.
+sub smimeType_matches {
+ my ($in, $expected_smime_type) = @_;
+
+ # Read the text file
+ open(my $fh, '<', $in) or die("open failed for $in : $!");
+ local $/;
+ my $content = <$fh>;
+ close($fh);
+
+ # Extract the Content-Type line with the smime-type attribute
+ if ($content =~ /Content-Type:\s*application\/pkcs7-mime.*smime-type=([^\s;]+)/) {
+ my $smime_type = $1;
+
+ # Compare the extracted smime-type with the expected value
+ return ($smime_type eq $expected_smime_type) ? 1 : 0;
+ }
+
+ # If no smime-type is found, return 0
+ return 0;
+}
+
sub rsapssSaltlen {
my ($in) = @_;
my $exit = 0;
@@ -986,6 +1027,22 @@
])),
"issue#19643");
+# Check that kari encryption with originator does not segfault
+with({ exit_checker => sub { return shift == 3; } },
+ sub {
+ SKIP: {
+ skip "EC is not supported in this build", 1 if $no_ec;
+
+ ok(run(app(['openssl', 'cms', '-encrypt',
+ '-in', srctop_file("test", "smcont.txt"), '-aes128',
+ '-recip', catfile($smdir, "smec1.pem"),
+ '-originator', catfile($smdir, "smec3.pem"),
+ '-inkey', catfile($smdir, "smec3.pem")
+ ])),
+ "Check failure for currently not supported kari encryption with static originator");
+ }
+ });
+
# Check that we get the expected failure return code
with({ exit_checker => sub { return shift == 6; } },
sub {
diff --git a/crypto/openssl/test/sslapitest.c b/crypto/openssl/test/sslapitest.c
--- a/crypto/openssl/test/sslapitest.c
+++ b/crypto/openssl/test/sslapitest.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2016-2024 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2016-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -190,7 +190,7 @@
return 1;
for (i = j = 0; i < raw_length && j + 1 < hex_length; i++, j += 2) {
- sprintf(hexed, "%02x", raw[i]);
+ BIO_snprintf(hexed, sizeof(hexed), "%02x", raw[i]);
if (!TEST_int_eq(hexed[0], hex_encoded[j])
|| !TEST_int_eq(hexed[1], hex_encoded[j + 1]))
return 1;
@@ -10918,6 +10918,7 @@
return SSL_TLSEXT_ERR_OK;
case 1:
+ *out = NULL;
*outlen = 0;
return SSL_TLSEXT_ERR_OK;
diff --git a/crypto/openssl/test/testutil/tests.c b/crypto/openssl/test/testutil/tests.c
--- a/crypto/openssl/test/testutil/tests.c
+++ b/crypto/openssl/test/testutil/tests.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2017-2021 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2017-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
@@ -146,6 +146,7 @@
void test_note(const char *fmt, ...)
{
+ test_flush_stdout();
if (fmt != NULL) {
va_list ap;
diff --git a/crypto/openssl/test/threadstest.c b/crypto/openssl/test/threadstest.c
--- a/crypto/openssl/test/threadstest.c
+++ b/crypto/openssl/test/threadstest.c
@@ -358,7 +358,7 @@
* Therefore we use an insecure bit length where we can (512).
* In the FIPS module though we must use a longer length.
*/
- pkey = EVP_PKEY_Q_keygen(multi_libctx, NULL, "RSA", isfips ? 2048 : 512);
+ pkey = EVP_PKEY_Q_keygen(multi_libctx, NULL, "RSA", (size_t)(isfips ? 2048 : 512));
if (!TEST_ptr(pkey))
goto err;
diff --git a/crypto/openssl/util/check-format-commit.sh b/crypto/openssl/util/check-format-commit.sh
--- a/crypto/openssl/util/check-format-commit.sh
+++ b/crypto/openssl/util/check-format-commit.sh
@@ -6,24 +6,21 @@
# You can obtain a copy in the file LICENSE in the source distribution
# or at https://www.openssl.org/source/license.html
#
-# This script is a wrapper around check-format.pl. It accepts a commit sha
-# value as input, and uses it to identify the files and ranges that were
-# changed in that commit, filtering check-format.pl output only to lines that
-# fall into the commits change ranges.
-#
-
-
-# List of Regexes to use when running check-format.pl.
-# Style checks don't apply to any of these
-EXCLUDED_FILE_REGEX=("\.pod" \
- "\.pl" \
- "\.pm" \
- "\.t" \
- "\.yml" \
- "\.sh")
-
-# Exit code for the script
-EXIT_CODE=0
+# This script is a wrapper around check-format.pl.
+# It accepts the same commit revision range as 'git diff' as arguments,
+# or just a single commit id, and uses it to identify the files and line ranges
+# that were changed in that commit range, filtering check-format.pl output
+# only to lines that fall into the change ranges of the changed files.
+# examples:
+# check-format-commit.sh # check unstaged changes
+# check-format-commit.sh HEAD
+# check-format-commit.sh @~3..
+# check-format-commit.sh f5981c9629667a5a5d6
+# check-format-commit.sh f5981c9629667a5a5d6..ee0bf38e8709bf71888
+
+# Allowlist of files to scan
+# Currently this is any .c or .h file (with an optional .in suffix)
+FILE_NAME_END_ALLOWLIST=("\.[ch]\(.in\)\?")
# Global vars
@@ -45,94 +42,107 @@
trap cleanup EXIT
-# Get the canonical sha256 sum for the commit we are checking
+# Get the list of ids of the commits we are checking,
+# or empty for unstaged changes.
# This lets us pass in symbolic ref names like master/etc and
-# resolve them to sha256 sums easily
-COMMIT=$(git rev-parse $1)
+# resolve them to commit ids easily
+COMMIT_RANGE="$@"
+[ -n $COMMIT_RANGE ] && COMMIT_LAST=$(git rev-parse $COMMIT_RANGE)
-# Fail gracefully if git rev-parse doesn't produce a valid
-# commit
+# Fail gracefully if git rev-parse doesn't produce a valid commit
if [ $? -ne 0 ]
then
- echo "$1 is not a valid revision"
+ echo "$1 is not a valid commit range or commit id"
exit 1
fi
-# Create a iteratable list of files to check for a
-# given commit. It produces output of the format
-# <commit id> <file name> <change start line>, <change line count>
-touch $TEMPDIR/ranges.txt
-git show $COMMIT | awk -v mycmt=$COMMIT '
+# If the commit range is exactly one revision,
+# git rev-parse will output just the commit id of that one alone.
+# In that case, we must manipulate a little to get a desirable result,
+# as 'git diff' has a slightly different interpretation of a single commit id:
+# it takes that to mean all commits up to HEAD, plus any unstaged changes.
+if [ $(echo -n "$COMMIT_LAST" | wc -w) -ne 1 ]; then
+ COMMIT_LAST=$(echo "$COMMIT_LAST" | head -1)
+else
+ # $COMMIT_RANGE is just one commit, make it an actual range
+ COMMIT_RANGE=$COMMIT_RANGE^..$COMMIT_RANGE
+fi
+
+# Create an iterable list of files to check formatting on,
+# including the line ranges that are changed by the commits
+# It produces output of this format:
+# <file name> <change start line>, <change line count>
+git diff -U0 $COMMIT_RANGE | awk '
BEGIN {myfile=""}
- /+{3}/ {
- gsub(/b\//,"",$2);
- myfile=$2
- }
- /@@/ {
- gsub(/+/,"",$3);
- printf mycmt " " myfile " " $3 "\n"
- }' >> $TEMPDIR/ranges.txt || true
-
-# filter out anything that matches on a filter regex
-for i in ${EXCLUDED_FILE_REGEX[@]}
-do
- touch $TEMPDIR/ranges.filter
- grep -v "$i" $TEMPDIR/ranges.txt >> $TEMPDIR/ranges.filter || true
- REMAINING_FILES=$(wc -l $TEMPDIR/ranges.filter | awk '{print $1}')
- if [ $REMAINING_FILES -eq 0 ]
- then
- echo "This commit has no files that require checking"
- exit 0
- fi
- mv $TEMPDIR/ranges.filter $TEMPDIR/ranges.txt
-done
+ /^\+\+\+/ { sub(/^b./,"",$2); file=$2 }
+ /^@@/ { sub(/^\+/,"",$3); range=$3; printf file " " range "\n" }
+ ' > $TEMPDIR/ranges.txt
-# check out the files from the commit level.
-# For each file name in ranges, we show that file at the commit
-# level we are checking, and redirect it to the same path, relative
-# to $TEMPDIR/check-format. This give us the full file to run
-# check-format.pl on with line numbers matching the ranges in the
-# $TEMPDIR/ranges.txt file
-for j in $(grep $COMMIT $TEMPDIR/ranges.txt | awk '{print $2}')
+# filter in anything that matches on a filter regex
+for i in ${FILE_NAME_END_ALLOWLIST[@]}
do
- FDIR=$(dirname $j)
- mkdir -p $TEMPDIR/check-format/$FDIR
- git show $COMMIT:$j > $TEMPDIR/check-format/$j
+ # Note the space after the $i below. This is done because we want
+ # to match on file name suffixes, but the input file is of the form
+ # <commit> <file path> <range start>, <range length>
+ # So we can't just match on end of line. The additional space
+ # here lets us match on suffixes followed by the expected space
+ # in the input file
+ grep "$i " $TEMPDIR/ranges.txt >> $TEMPDIR/ranges.filter || true
done
-# Now for each file in $TEMPDIR/check-format run check-format.pl
-# Note that we use the %P formatter in the find utilty. This strips
-# off the $TEMPDIR/check-format path prefix, leaving $j with the
-# path to the file relative to the root of the source dir, so that
-# output from check-format.pl looks correct, relative to the root
-# of the git tree.
-for j in $(find $TEMPDIR/check-format -type f -printf "%P\n")
+REMAINING_FILES=$(wc -l <$TEMPDIR/ranges.filter)
+if [ $REMAINING_FILES -eq 0 ]
+then
+ echo "The given commit range has no C source file changes that require checking"
+ exit 0
+fi
+
+# unless checking the format of unstaged changes,
+# check out the files from the commit range.
+if [ -n "$COMMIT_RANGE" ]
+then
+ # For each file name in ranges, we show that file at the commit range
+ # we are checking, and redirect it to the same path,
+ # relative to $TEMPDIR/check-format.
+ # This give us the full file path to run check-format.pl on
+ # with line numbers matching the ranges in the $TEMPDIR/ranges.filter file
+ for j in $(awk '{print $1}' $TEMPDIR/ranges.filter | sort -u)
+ do
+ FDIR=$(dirname $j)
+ mkdir -p $TEMPDIR/check-format/$FDIR
+ git show $COMMIT_LAST:$j > $TEMPDIR/check-format/$j
+ done
+fi
+
+# Now for each file in $TEMPDIR/ranges.filter, run check-format.pl
+for j in $(awk '{print $1}' $TEMPDIR/ranges.filter | sort -u)
do
range_start=()
range_end=()
# Get the ranges for this file. Create 2 arrays. range_start contains
# the start lines for valid ranges from the commit. the range_end array
- # contains the corresponding end line (note, since diff output gives us
+ # contains the corresponding end line. Note, since diff output gives us
# a line count for a change, the range_end[k] entry is actually
# range_start[k]+line count
- for k in $(grep $COMMIT $TEMPDIR/ranges.txt | grep $j | awk '{print $3}')
+ for k in $(grep ^$j $TEMPDIR/ranges.filter | awk '{print $2}')
do
- RANGE=$k
- RSTART=$(echo $RANGE | awk -F',' '{print $1}')
- RLEN=$(echo $RANGE | awk -F',' '{print $2}')
+ RSTART=$(echo $k | awk -F',' '{print $1}')
+ RLEN=$(echo $k | awk -F',' '{print $2}')
+ # when the hunk is just one line, its length is implied
+ if [ -z "$RLEN" ]; then RLEN=1; fi
let REND=$RSTART+$RLEN
range_start+=($RSTART)
range_end+=($REND)
done
- # Go to our checked out tree
- cd $TEMPDIR/check-format
+ # Go to our checked out tree, unless checking unstaged changes
+ [ -n "$COMMIT_RANGE" ] && cd $TEMPDIR/check-format
# Actually run check-format.pl on the file, capturing the output
- # in a temporary file. Note the format of check-patch.pl output is
- # <file name>:<line number>:<error text>:<offending line contents>
- $TOPDIR/util/check-format.pl $j > $TEMPDIR/format-results.txt
+ # in a temporary file. Note the format of check-format.pl output is
+ # <file path>:<line number>:<error text>:<offending line contents>
+ $TOPDIR/util/check-format.pl $j > $TEMPDIR/results.txt
# Now we filter the check-format.pl output based on the changed lines
# captured in the range_start/end arrays
@@ -146,26 +156,15 @@
# Check here if any line in that output falls between any of the
# start/end ranges defined in the range_start/range_end array.
# If it does fall in that range, print the entire line to stdout
- # If anything is printed, have awk exit with a non-zero exit code
awk -v rstart=$RSTART -v rend=$REND -F':' '
- BEGIN {rc=0}
- /:/ {
- if (($2 >= rstart) && ($2 <= rend)) {
- print $0;
- rc=1
- }
- }
- END {exit rc;}
- ' $TEMPDIR/format-results.txt
-
- # If awk exited with a non-zero code, this script will also exit
- # with a non-zero code
- if [ $? -ne 0 ]
- then
- EXIT_CODE=1
- fi
+ /:/ { if (rstart <= $2 && $2 <= rend) print $0 }
+ ' $TEMPDIR/results.txt >>$TEMPDIR/results-filtered.txt
done
done
+cat $TEMPDIR/results-filtered.txt
-# Exit with the recorded exit code above
-exit $EXIT_CODE
+# If any findings were in range, exit with a different error code
+if [ -s $TEMPDIR/results-filtered.txt ]
+then
+ exit 2
+fi
diff --git a/crypto/openssl/util/check-format.pl b/crypto/openssl/util/check-format.pl
--- a/crypto/openssl/util/check-format.pl
+++ b/crypto/openssl/util/check-format.pl
@@ -791,7 +791,7 @@
# treat remaining blinded comments and string literal contents as (single) space during matching below
$intra_line =~ s/@+/ /g; # note that extra SPC has already been handled above
$intra_line =~ s/\s+$//; # strip any (resulting) space at EOL
- # replace ';;' or '; ;' by ';' in "for(;;)" and in "for (...)" unless "..." contains just SPC and ';' characters:
+ # replace ';;' or '; ;' by ';' in "for (;;)" and in "for (...)" unless "..." contains just SPC and ';' characters:
$intra_line =~ s/((^|\W)for\s*\()([^;]*?)(\s*)(;\s?);(\s*)([^;]*)(\))/
"$1$3$4".("$3$4$5$6$7" eq ";" || $3 ne "" || $7 ne "" ? "" : $5).";$6$7$8"/eg;
# strip trailing ';' or '; ' in "for (...)" except in "for (;;)" or "for (;; )":
@@ -904,7 +904,7 @@
# handle opening brace '{' after if/else/while/for/switch/do on line before
if ($hanging_offset > 0 && m/^[\s@]*{/ && # leading opening '{'
$line_before > 0 &&
- $contents_before_ =~ m/(^|^.*\W)(if|else|while|for|switch|do)(\W.*$|$)/) {
+ $contents_before_ =~ m/(^|^.*\W)(if|else|while|for|(OSSL_)?LIST_FOREACH(_\w+)?|switch|do)(\W.*$|$)/) {
$keyword_opening_brace = $1;
$hanging_offset -= INDENT_LEVEL; # cancel newly hanging_offset
}
@@ -966,7 +966,7 @@
my $outermost_level = $block_indent - $preproc_offset == 0;
- report("more than one stmt") if !m/(^|\W)for(\W.*|$)/ && # no 'for' - TODO improve matching
+ report("more than one stmt") if !m/(^|\W)(for|(OSSL_)?LIST_FOREACH(_\w+)?)(\W.*|$)/ && # no 'for' - TODO improve matching
m/;.*;/; # two or more terminators ';', so more than one statement
# check for code block containing a single line/statement
@@ -1004,7 +1004,7 @@
my $assignment_start = 0;
my $tmp = $_;
$tmp =~ s/[\!<>=]=/@@/g; # blind (in-)equality symbols like '<=' as '@@' to prevent matching them as '=' below
- if (m/^((^|.*\W)(if|while|for|switch))(\W.*|$)$/) { # (last) if/for/while/switch
+ if (m/^((^|.*\W)(if|while|for|(OSSL_)?LIST_FOREACH(_\w+)?|switch))(\W.*|$)$/) { # (last) if/for/while/switch
$paren_expr_start = 1;
} elsif (m/^((^|.*\W)(return|enum))(\W.*|$)/ # (last) return/enum
&& !$in_expr && @nested_indents == 0 && parens_balance($1) == 0) { # not nested enum
@@ -1135,7 +1135,7 @@
$line_body_start = $contents =~ m/LONG BODY/ ? 0 : $line if $line_function_start != 0;
}
} else {
- $line_opening_brace = $line if $keyword_opening_brace =~ m/if|do|while|for/;
+ $line_opening_brace = $line if $keyword_opening_brace =~ m/if|do|while|for|(OSSL_)?LIST_FOREACH(_\w+)?/;
# using, not assigning, $keyword_opening_brace here because it could be on an earlier line
$line_opening_brace = $line if $keyword_opening_brace eq "else" && $extended_1_stmt &&
# TODO prevent false positives for if/else where braces around single-statement branches
@@ -1148,11 +1148,11 @@
}
}
- # check for opening brace after if/while/for/switch/do not on same line
+ # check for opening brace after if/while/for/switch/do missing on same line
# note that "missing '{' on same line after '} else'" is handled further below
if (/^[\s@]*{/ && # leading '{'
$line_before > 0 && !($contents_before_ =~ m/^\s*#/) && # not preprocessor directive '#if
- (my ($head, $mid, $tail) = ($contents_before_ =~ m/(^|^.*\W)(if|while|for|switch|do)(\W.*$|$)/))) {
+ (my ($head, $mid, $tail) = ($contents_before_ =~ m/(^|^.*\W)(if|while|for|(OSSL_)?LIST_FOREACH(_\w+)?|switch|do)(\W.*$|$)/))) {
my $brace_after = $tail =~ /^[\s@]*{/; # any whitespace or comments then '{'
report("'{' not on same line as preceding '$mid'") if !$brace_after;
}
diff --git a/crypto/openssl/util/mkbuildinf.pl b/crypto/openssl/util/mkbuildinf.pl
--- a/crypto/openssl/util/mkbuildinf.pl
+++ b/crypto/openssl/util/mkbuildinf.pl
@@ -1,5 +1,5 @@
#! /usr/bin/env perl
-# Copyright 2014-2017 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2014-2025 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
@@ -9,17 +9,21 @@
use strict;
use warnings;
-my ($cflags, $platform) = @ARGV;
+my $platform = pop @ARGV;
+my $cflags = join(' ', @ARGV);
+$cflags =~ s(\\)(\\\\)g;
$cflags = "compiler: $cflags";
-my $date = gmtime($ENV{'SOURCE_DATE_EPOCH'} || time()) . " UTC";
+# Use the value of the envvar SOURCE_DATE_EPOCH, even if it's
+# zero or the empty string.
+my $date = gmtime($ENV{'SOURCE_DATE_EPOCH'} // time()) . " UTC";
print <<"END_OUTPUT";
/*
* WARNING: do not edit!
* Generated by util/mkbuildinf.pl
*
- * Copyright 2014-2017 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 2014-2025 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
diff --git a/crypto/openssl/util/perl/OpenSSL/Template.pm b/crypto/openssl/util/perl/OpenSSL/Template.pm
--- a/crypto/openssl/util/perl/OpenSSL/Template.pm
+++ b/crypto/openssl/util/perl/OpenSSL/Template.pm
@@ -42,6 +42,14 @@
our @ISA = qw(Text::Template); # parent
+sub tmpl_error {
+ my (%err_dict) = @_;
+
+ $ERROR = $err_dict{"error"};
+
+ return undef;
+}
+
sub new {
my $class = shift;
@@ -66,6 +74,7 @@
output_on => sub { $self->output_on() },
output_off => sub { $self->output_off() },
%hash },
+ BROKEN => \&tmpl_error,
%opts);
}

File Metadata

Mime Type
text/plain
Expires
Mon, Mar 10, 2:30 AM (3 h, 35 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
17078560
Default Alt Text
D49296.id.diff (292 KB)

Event Timeline