Change Details

From 10.2 through 11.1, it was a armv6 userland, an arm v5 kernel for the old GUMSTIX Xscale PXA based Basix or Connex boards and a boot loader for GUMSTIX Duovero OMAP 44xx Cortext armv6 board. For 11.2 and in -current this changed to be armv4/5 userland, an armv5 kernel for the old GUMSTIX boards but still the bootloader for duovero. There is no uboot available for the old Connex boards that's appropriate for this setup. It did have a u-boot for pflash, but the pflash was only 16MB which is far too small for an image like this. The old duovero boards are now unobtanium, so fixing it to work there isn't worth the effort since that can't easily be tested. There is also a GUMSTIX-QEMU config. However, that platform hasn't worked since QEMU 0.9. All newer versions I tried failed in different ways. So, since this image has never worked, and there's no easy way to fix and test it, retire it.

There has never been a release that had the three critical components matching. From 10.2 through 11.1, it was a armv6 userland, an arm v5 kernel for the old GUMSTIX Xscale PXA based Basix or Connex boards and a boot loader for GUMSTIX Duovero OMAP 44xx Cortext armv6 board. For 11.2 and in -current this changed to be armv4/5 userland, an armv5 kernel for the old GUMSTIX boards but still the bootloader for duovero. There is no uboot available for the old Connex boards that's appropriate for this setup. It did have a u-boot for pflash, but the pflash was only 16MB which is far too small for an image like this. The old duovero boards are now unobtanium, so fixing it to work there isn't worth the effort since that can't easily be tested. There is also a GUMSTIX-QEMU config. However, that platform hasn't worked since QEMU 0.9. All newer versions I tried failed in different ways. So, since this image has never worked, and there's no easy way to fix and test it, retire it.

There has never been a release that had the three critical components matching. From 10.2 through 11.1, it was a armv6 userland, an arm v5 kernel for the old GUMSTIX Xscale PXA based Basix or Connex boards and a boot loader for GUMSTIX Duovero OMAP 44xx Cortext armv6 board. For 11.2 and in -current this changed to be armv4/5 userland, an armv5 kernel for the old GUMSTIX boards but still the bootloader for duovero. There is no uboot available for the old Connex boards that's appropriate for this setup. It did have a u-boot for pflash, but the pflash was only 16MB which is far too small for an image like this. The old duovero boards are now unobtanium, so fixing it to work there isn't worth the effort since that can't easily be tested. There is also a GUMSTIX-QEMU config. However, that platform hasn't worked since QEMU 0.9. All newer versions I tried failed in different ways. So, since this image has never worked, and there's no easy way to fix and test it, retire it.