Index: head/etc/namedb/PROTO.localhost-v6.rev
===================================================================
--- head/etc/namedb/PROTO.localhost-v6.rev	(nonexistent)
+++ head/etc/namedb/PROTO.localhost-v6.rev	(revision 89660)
@@ -0,0 +1,17 @@
+;	From: @(#)localhost.rev	5.1 (Berkeley) 6/30/90
+; $FreeBSD$
+;
+; This file is automatically edited by the `make-localhost' script in
+; the /etc/namedb directory.
+;
+
+$TTL	3600
+
+@	IN	SOA	@host@. root.@host@.  (
+				@date@	; Serial
+				3600	; Refresh
+				900	; Retry
+				3600000	; Expire
+				3600 )	; Minimum
+	IN	NS	@host@.
+	IN	PTR	localhost.@domain@.

Property changes on: head/etc/namedb/PROTO.localhost-v6.rev
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Index: head/etc/namedb/make-localhost
===================================================================
--- head/etc/namedb/make-localhost	(revision 89659)
+++ head/etc/namedb/make-localhost	(revision 89660)
@@ -1,40 +1,47 @@
 #!/bin/sh
 #
 # $FreeBSD$
 #
 # make-localhost - edit the appropriate local information into
 # /etc/namedb/localhost.rev
 #
 
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin
 export PATH
 
 if [ "`hostname -s`" != "`hostname`" ]; then
 	# hostname must contain domain
 
 	host=`hostname -s`
 	fullhost=`hostname`
 	domain=`echo $fullhost | sed "s/^$host\.//"`
 else
 	host=`hostname`
 
 	if [ -z "$1" ]; then
 		echo -n 'Enter your domain name: '
 		read domain
 	else
 		domain="$1"
 	fi
 
 	# strip trailing dot, if any
 	domain=`echo $domain | sed 's/\.$//'`
 	fullhost="$host.$domain"
 fi
 
 date=`date +"%Y%m%d"`
 
+mv -f localhost-v6.rev localhost-v6.rev.BAK 2>/dev/null
+
+sed -e "s/@host@/$fullhost/g" \
+	-e "s/@domain@/$domain/g" \
+	-e "s/@date@/$date/g" \
+	< PROTO.localhost-v6.rev > localhost-v6.rev
+
 mv -f localhost.rev localhost.rev.BAK 2>/dev/null
 
 exec sed -e "s/@host@/$fullhost/g" \
 	-e "s/@domain@/$domain/g" \
 	-e "s/@date@/$date/g" \
 	< PROTO.localhost.rev > localhost.rev
Index: head/etc/namedb/named.conf
===================================================================
--- head/etc/namedb/named.conf	(revision 89659)
+++ head/etc/namedb/named.conf	(revision 89660)
@@ -1,118 +1,118 @@
 // $FreeBSD$
 //
 // Refer to the named.conf(5) and named(8) man pages for details.  If
 // you are ever going to setup a primary server, make sure you've
 // understood the hairy details of how DNS is working.  Even with
 // simple mistakes, you can break connectivity for affected parties,
 // or cause huge amount of useless Internet traffic.
 
 options {
 	directory "/etc/namedb";
 	pid-file "/var/run/named/pid";
 
 // In addition to the "forwarders" clause, you can force your name
 // server to never initiate queries of its own, but always ask its
 // forwarders only, by enabling the following line:
 //
 //      forward only;
 
 // If you've got a DNS server around at your upstream provider, enter
 // its IP address here, and enable the line below.  This will make you
 // benefit from its cache, thus reduce overall DNS traffic in the Internet.
 /*
 	forwarders {
 		127.0.0.1;
 	};
 */
 	/*
 	 * If there is a firewall between you and nameservers you want
 	 * to talk to, you might need to uncomment the query-source
 	 * directive below.  Previous versions of BIND always asked
 	 * questions using port 53, but BIND 8.1 uses an unprivileged
 	 * port by default.
 	 */
 	// query-source address * port 53;
 
 	/*
 	 * If running in a sandbox, you may have to specify a different
 	 * location for the dumpfile.
 	 */
 	// dump-file "s/named_dump.db";
 };
 
 // Note: the following will be supported in a future release.
 /*
 host { any; } {
 	topology {
 		127.0.0.0/8;
 	};
 };
 */
 
 // Setting up secondaries is way easier and the rough picture for this
 // is explained below.
 //
 // If you enable a local name server, don't forget to enter 127.0.0.1
 // into your /etc/resolv.conf so this server will be queried first.
 // Also, make sure to enable it in /etc/rc.conf.
 
 zone "." {
 	type hint;
 	file "named.root";
 };
 
 zone "0.0.127.IN-ADDR.ARPA" {
 	type master;
 	file "localhost.rev";
 };
 
-zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.INT" {
+zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.INT" {
 	type master;
-	file "localhost.rev";
+	file "localhost-v6.rev";
 };
 
 // NB: Do not use the IP addresses below, they are faked, and only
 // serve demonstration/documentation purposes!
 //
 // Example secondary config entries.  It can be convenient to become
 // a secondary at least for the zone where your own domain is in.  Ask
 // your network administrator for the IP address of the responsible
 // primary.
 //
 // Never forget to include the reverse lookup (IN-ADDR.ARPA) zone!
 // (This is the first bytes of the respective IP address, in reverse
 // order, with ".IN-ADDR.ARPA" appended.)
 //
 // Before starting to setup a primary zone, better make sure you fully
 // understand how DNS and BIND works, however.  There are sometimes
 // unobvious pitfalls.  Setting up a secondary is comparably simpler.
 //
 // NB: Don't blindly enable the examples below. :-)  Use actual names
 // and addresses instead.
 //
 // NOTE!!! FreeBSD can run bind in a sandbox (see named_flags in rc.conf).
 // The directory containing the secondary zones must be write accessible 
 // to bind.  The following sequence is suggested:
 //
 //	mkdir /etc/namedb/s
 //	chown bind:bind /etc/namedb/s
 //	chmod 750 /etc/namedb/s
 
 /*
 zone "domain.com" {
 	type slave;
 	file "s/domain.com.bak";
 	masters {
 		192.168.1.1;
 	};
 };
 
 zone "0.168.192.in-addr.arpa" {
 	type slave;
 	file "s/0.168.192.in-addr.arpa.bak";
 	masters {
 		192.168.1.1;
 	};
 };
 */