Index: releng/4.4/etc/defaults/rc.conf =================================================================== --- releng/4.4/etc/defaults/rc.conf (nonexistent) +++ releng/4.4/etc/defaults/rc.conf (revision 82294) @@ -0,0 +1,371 @@ +#!/bin/sh +# + +# This is rc.conf - a file full of useful variables that you can set +# to change the default startup behavior of your system. You should +# not edit this file! Put any overrides into one of the ${rc_conf_files} +# instead and you will be able to update these defaults later without +# spamming your local configuration information. +# +# The ${rc_conf_files} files should only contain values which override +# values set in this file. This eases the upgrade path when defaults +# are changed and new features are added. +# +# All arguments must be in double or single quotes. +# +# $FreeBSD$ + +############################################################## +### Important initial Boot-time options #################### +############################################################## + +swapfile="NO" # Set to name of swapfile if aux swapfile desired. +apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). +apmd_enable="NO" # Run apmd to handle APM event from userland. +apmd_flags="" # Flags to apmd (if enabled). +pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. +pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. +pccard_beep="2" # pccard beep type. +pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). +pccardd_flags="" # Additional flags for pccardd. +pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file +local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. +script_name_sep=" " # Change if your startup scripts' names contain spaces +rc_conf_files="/etc/rc.conf /etc/rc.conf.local" +fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. + +############################################################## +### Network configuration sub-section ###################### +############################################################## + +### Basic network and firewall/security options: ### +hostname="" # Set this! +nisdomainname="NO" # Set to NIS domain if using NIS (or NO). +dhcp_program="/sbin/dhclient" # Path to dhcp client program. +dhcp_flags="" # Additional flags to pass to dhcp client. +firewall_enable="NO" # Set to YES to enable firewall functionality +firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall +firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) +firewall_quiet="NO" # Set to YES to suppress rule display +firewall_logging="NO" # Set to YES to enable events logging +firewall_flags="" # Flags passed to ipfw when type is a file +ip_portrange_first="NO" # Set first dynamically allocated port +ip_portrange_last="NO" # Set last dynamically allocated port +ipsec_enable="NO" # Set to YES to run setkey on ipsec_file +ipsec_file="/etc/ipsec.conf" # Name of config file for setkey +natd_program="/sbin/natd" # path to natd, if you want a different one. +natd_enable="NO" # Enable natd (if firewall_enable == YES). +natd_interface="fxp0" # Public interface or IPaddress to use. +natd_flags="" # Additional flags for natd. +ipfilter_enable="NO" # Set to YES to enable ipfilter functionality +ipfilter_program="/sbin/ipf -Fa -f" + # program and how to specify the rules file, + # see /etc/rc.network (pass1) for details +ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see + # /usr/src/contrib/ipfilter/rules for examples +ipfilter_flags="-E" # should be *empty* when ipf is _not_ a module + # (i.e. compiled into the kernel) to + # avoid a warning about "already initialized" +ipnat_enable="NO" # Set to YES for ipnat; needs ipfilter, too! +ipnat_program="/sbin/ipnat -CF -f" # program and how to specify rules file +ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat +ipnat_flags="" # additional flags for ipnat +ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter, too! +ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives +ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" +tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. +log_in_vain="NO" # YES to log connects to ports w/o listeners. +tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). +# For the following option, you need to build your kernel with the +# TCP_DROP_SYNFIN option set. Please refer to LINT for details. +tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN + # NOTE: this violates the TCP specification +icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets +icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets +network_interfaces="auto" # List of network interfaces (or "auto"). +ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. +#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. +#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. +# +# If you have any sppp(4) interfaces above, you might also want to set +# the following parameters. Refer to spppcontrol(8) for their meaning. +sppp_interfaces="" # List of sppp interfaces. +#sppp_interfaces="isp0" # example: sppp over ISDN +#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" +gif_interfaces="NO" # List of GIF tunnels (or "NO"). +#gif_interfaces="gif0 gif1" # Examples typically for a router. + # Choose correct tunnel addrs. +#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. +#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. + +# User ppp configuration. +ppp_enable="NO" # Start user-ppp (or NO). +ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". + # For details see man page for ppp(8). Default is auto. +ppp_nat="YES" # Use PPP's internal network address translation or NO. +ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. +ppp_user="root" # Which user to run ppp as + +### Network daemon (miscellaneous) & NFS options: ### +syslogd_enable="YES" # Run syslog daemon (or NO). +syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. +syslogd_flags="-s" # Flags to syslogd (if enabled). +inetd_enable="YES" # Run the network daemon dispatcher (or NO). +inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. +inetd_flags="-wW" # Optional flags to inetd +# +# named. It may be possible to run named in a sandbox, man security for +# details. +# +named_enable="NO" # Run named, the DNS server (or NO). +named_program="named" # path to named, if you want a different one. +named_flags="" # Flags for named +#named_flags="-u bind -g bind" # Flags for named + +kerberos_server_enable="NO" # Run a kerberos master server (or NO). +kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on + # a slave kerberos server +kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). +kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC +kadmind5_server_enable="NO" # Run kadmind (or NO) +kadmind5_server="/usr/libexec/k5admind" # path to kerberos 5 admin daemon +kerberos_stash="" # Is the kerberos master key stashed? +rwhod_enable="NO" # Run the rwho daemon (or NO). +rwhod_flags="" # Flags for rwhod +amd_enable="NO" # Run amd service with $amd_flags (or NO). +amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" +amd_map_program="NO" # Can be set to "ypcat -k amd.master" +nfs_client_enable="NO" # This host is an NFS client (or NO). +nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). +nfs_access_cache="2" # Client cache timeout in seconds +nfs_server_enable="NO" # This host is an NFS server (or NO). +nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). +single_mountd_enable="NO" # Run mountd only (or NO). +mountd_flags="-r" # Flags to mountd (if NFS server enabled). +weak_mountd_authentication="NO" # Allow non-root mount requests to be served. +nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). +nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) +rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. +rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). +portmap_enable="NO" # Run the portmapper service (or NO). +portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. +portmap_flags="" # Flags to portmap (if enabled). +rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). +keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). +keyserv_flags="" # Flags to keyserv (if enabled). +rarpd_enable="NO" # Run rarpd (or NO). +rarpd_flags="" # Flags to rarpd. +xtend_enable="NO" # Run the X-10 power controller daemon. +xtend_flags="" # Flags to xtend (if enabled). +pppoed_enable="NO" # Run the PPP over Ethernet daemon. +pppoed_provider="*" # Provider and ppp(8) config file entry. +pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). +pppoed_interface="fxp0" # The interface that pppoed runs on. +sshd_enable="NO" # Enable sshd +sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. +sshd_flags="" # Additional flags for sshd. + +### Network Time Services options: ### +timed_enable="NO" # Run the time daemon (or NO). +timed_flags="" # Flags to timed (if enabled). +ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). +ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. +ntpdate_flags="" # Flags to ntpdate (if enabled). +xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). +xntpd_program="ntpd" # path to ntpd, if you want a different one. +xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). + +# Network Information Services (NIS) options: ### +nis_client_enable="NO" # We're an NIS client (or NO). +nis_client_flags="" # Flags to ypbind (if enabled). +nis_ypset_enable="NO" # Run ypset at boot time (or NO). +nis_ypset_flags="" # Flags to ypset (if enabled). +nis_server_enable="NO" # We're an NIS server (or NO). +nis_server_flags="" # Flags to ypserv (if enabled). +nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). +nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). +nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). +nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). + +### Network routing options: ### +defaultrouter="NO" # Set to default gateway (or NO). +static_routes="" # Set to static route list (or leave empty). +gateway_enable="NO" # Set to YES if this host will be a gateway. +router_enable="NO" # Set to YES to enable a routing daemon. +router="routed" # Name of routing daemon to use if enabled. +router_flags="-q" # Flags for routing daemon. +mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). +mrouted_flags="" # Flags for multicast routing daemon. +ipxgateway_enable="NO" # Set to YES to enable IPX routing. +ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. +ipxrouted_flags="" # Flags for IPX routing daemon. +arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. +forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") +accept_sourceroute="NO" # accept source routed packets to us + +### ATM interface options: ### +atm_enable="NO" # Configure ATM interfaces (or NO). +#atm_netif_hea0="atm 1" # Network interfaces for physical interface. +#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. +#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). +#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). +#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). +#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). +atm_pvcs="" # Set to PVC list (or leave empty). +atm_arps="" # Set to permanent ARP list (or leave empty). + +### ISDN interface options: ### +isdn_enable="NO" # Enable the ISDN subsystem (or NO). +isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). +isdn_flags="-dn -d0x1f9" # Flags for isdnd +isdn_ttype="cons25" # terminal type for fullscreen mode +isdn_screenflags="NO" # screenflags for ${isdn_fsdev} +isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). +isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace + +### Miscellaneous network options: ### +icmp_bmcastecho="NO" # respond to broadcast ping packets + +### IPv6 options: ### +ipv6_enable="NO" # Set to YES to set up for IPv6. +ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). +ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). +ipv6_static_routes="" # Set to static route list (or leave empty). +#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 + # route toward loopback interface. +#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" +ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. +ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. +ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. +ipv6_router_flags="" # Flags to IPv6 routing daemon. +#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local + # addrs. +#ipv6_network_interfaces="ed0 ep0" # Examples for router + # or static configuration for end node. + # Choose correct prefix value. +#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. +#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. +#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry +#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. +ipv6_default_interface="NO" # Default output interface for scoped addrs. + # Now this works only for IPv6 link local + # multicast addrs. +rtadvd_enable="NO" # Set to YES to enable an IPv6 router + # advertisement daemon. If set to YES, + # this router becomes a possible candidate + # IPv6 default router for local subnets. +rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. +mroute6d_enable="NO" # Do IPv6 multicast routing. +mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing + # daemon. +mroute6d_flags="" # Flags to IPv6 multicast routing daemon. +stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 + # tunneling interface. Specify this entry + # to enable 6to4 interface. +stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, + # to limit peer addr range. Effective value + # is 0-31. +stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. + # If you like, you can set "AUTO" for this. +stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 +ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH + # IPv6-to-IPv4 TCP translator. You also need + # faithd(8) setup. +ipv6_ipv4mapping="YES" # Leave empty to disable IPv4 mapped IPv6 addr + # communication. (like ::ffff:a.b.c.d) +ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall + # functionality +ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall +ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) +ipv6_firewall_quiet="NO" # Set to YES to suppress rule display +ipv6_firewall_logging="NO" # Set to YES to enable events logging +ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file + +############################################################## +### System console options ################################# +############################################################## + +keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). +keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). +keybell="NO" # bell to duration.pitch or normal or visual (or NO). +keychange="NO" # function keys default values (or NO). +cursor="NO" # cursor type {normal|blink|destructive} (or NO). +scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). +font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). +font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). +font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). +blanktime="300" # blank time (in seconds) or "NO" to turn it off. +saver="NO" # screen saver: Uses /modules/${saver}_saver.ko +moused_enable="NO" # Run the mouse daemon. +moused_type="auto" # See man page for rc.conf(5) for available settings. +moused_port="/dev/psm0" # Set to your mouse port. +moused_flags="" # Any additional flags to moused. +mousechar_start="NO" # if 0xd0-0xd3 default range is occuped in your + # language code table, specify alternative range + # start like mousechar_start=3, see vidcontrol(1) +allscreens_flags="" # Set this vidcontrol mode for all virtual screens +allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens + + +############################################################## +### Miscellaneous administrative options ################### +############################################################## + +cron_enable="YES" # Run the periodic job daemon. +cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). +cron_flags="" # Which options to pass to the cron daemon. +lpd_enable="NO" # Run the line printer daemon. +lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. +lpd_flags="" # Flags to lpd (if enabled). +usbd_enable="NO" # Run the usbd daemon. +usbd_flags="" # Flags to usbd (if enabled). +sendmail_enable="YES" # Run the sendmail inbound daemon (or NO). +sendmail_flags="-bd -q30m" # Flags to sendmail (as a server) +sendmail_outbound_enable="NO" # Dequeue stuck mail (or YES). +sendmail_outbound_flags="-q30m" # Flags to sendmail (outbound only) +dumpdev="NO" # Device name to crashdump to (or NO). +savecore_flags="" # Used if dumpdev is enabled above, and present. +enable_quotas="NO" # turn on quotas on startup (or NO). +check_quotas="YES" # Check quotas on startup (or NO). +accounting_enable="NO" # Turn on process accounting (or NO). +ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). +ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). +linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). +svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). +osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). +rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). +clear_tmp_enable="NO" # Clear /tmp at startup. +ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks +ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" + # shared library search paths +ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" + # a.out shared library search paths +kern_securelevel_enable="NO" # kernel security level (see init(8)), +kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure +update_motd="YES" # update version info in /etc/motd (or NO) +start_vinum="NO" # set to YES to start vinum +unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). + +############################################################## +### Define source_rc_confs, the mechanism used by /etc/rc.* ## +### scripts to source rc_conf_files overrides safely. ## +############################################################## + +if [ -z "${source_rc_confs_defined}" ]; then + source_rc_confs_defined=yes + source_rc_confs () { + local i sourced_files + for i in ${rc_conf_files}; do + case ${sourced_files} in + *:$i:*) + ;; + *) + sourced_files="${sourced_files}:$i:" + if [ -r $i ]; then + . $i + fi + ;; + esac + done + } +fi Property changes on: releng/4.4/etc/defaults/rc.conf ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: releng/4.4/etc/pccard_ether =================================================================== --- releng/4.4/etc/pccard_ether (nonexistent) +++ releng/4.4/etc/pccard_ether (revision 82294) @@ -0,0 +1,174 @@ +#!/bin/sh - +# +# $FreeBSD$ +# +# pccard_ether interfacename [start|stop] [ifconfig option] +# +# example: pccard_ether ep0 start -link0 +# + +stop_dhcp() { + if [ -s /var/run/dhclient.${interface}.pid ]; then + pidfile="/var/run/dhclient.${interface}.pid" + elif [ -s /var/run/dhcpc.${interface}.pid ]; then + pidfile="/var/run/dhcpc.${interface}.pid" + else + return + fi + kill `cat ${pidfile}` + rm -f ${pidfile} +} + +start_dhcp() { + stop_dhcp + if [ -x "${dhcp_program}" ]; then + if [ `basename ${dhcp_program}` = "dhclient" ]; then + pidfile="/var/run/dhclient.${interface}.pid" + dhcp_flags="${dhcp_flags} -pf ${pidfile}" + fi + ${dhcp_program} ${dhcp_flags} ${interface} + else + echo "${dhcp_program}: DHCP client software not available" + fi +} + +# Suck in the configuration variables +# +if [ -r /etc/defaults/rc.conf ]; then + . /etc/defaults/rc.conf + source_rc_confs +elif [ -r /etc/rc.conf ]; then + . /etc/rc.conf +fi + +interface=$1 +shift +startstop=$1 +shift + +case ${pccard_ifconfig} in +[Nn][Oo] | '') + ;; +*) + # Backward compatible + eval ifconfig_${interface}=\${pccard_ifconfig} + ;; +esac + +case ${startstop} in +[Ss][Tt][Aa][Rr][Tt] | '') + if [ -r /etc/start_if.${interface} ]; then + . /etc/start_if.${interface} + fi + + eval ifconfig_args=\$ifconfig_${interface} + case ${ifconfig_args} in + [Nn][Oo] | '') + ;; + [Dd][Hh][Cc][Pp]) + # Start up the DHCP client program + start_dhcp + ;; + *) + # Do the primary ifconfig if specified + ifconfig ${interface} ${ifconfig_args} $* + + # Check to see if aliases need to be added + alias=0 + while : + do + eval ifx_args=\$ifconfig_${interface}_alias${alias} + if [ -n "${ifx_args}" ]; then + ifconfig ${interface} ${ifx_args} alias + alias=`expr ${alias} + 1` + else + break; + fi + done + + # Do ipx address if specified + eval ifx_args=\$ifconfig_${interface}_ipx + if [ -n "${ifx_args}" ]; then + ifconfig ${interface} ${ifx_args} + fi + + # Add default route into $static_routes + case ${defaultrouter} in + [Nn][Oo] | '') + ;; + *) + static_routes="default ${static_routes}" + route_default="default ${defaultrouter}" + ;; + esac + + # Add private route for this interface into $static_routes + eval ifx_routes=\$static_routes_${interface} + if [ -n "${ifx_routes}" ]; then + static_routes="${ifx_routes} ${static_routes}" + fi + + # Set up any static routes if specified + if [ -n "${static_routes}" ]; then + for i in ${static_routes}; do + eval route_args=\$route_${i} + route add ${route_args} + done + fi + ;; + esac + + # IPv6 setup + case ${ipv6_enable} in + [Yy][Ee][Ss]) + if [ -r /etc/rc.network6 ]; then + . /etc/rc.network6 + network6_interface_setup ${interface} + fi + ;; + esac + ;; +# Stop the interface +*) + if [ -r /etc/stop_if.${interface} ]; then + . /etc/stop_if.${interface} + fi + + eval ifconfig_args=\$ifconfig_${interface} + case ${ifconfig_args} in + [Nn][Oo] | '') + ;; + [Dd][Hh][Cc][Pp]) + # Stop the DHCP client for this interface + stop_dhcp + ;; + *) + # Delelte static route if specified + eval ifx_routes=\$static_routes_${interface} + if [ -n "${ifx_routes}" ]; then + for i in ${ifx_routes}; do + eval route_args=\$route_${i} + route delete ${route_args} + done + fi + + # Delete aliases if exist + alias=0 + while : + do + eval ifx_args=\$ifconfig_${interface}_alias${alias} + if [ -n "${ifx_args}" ]; then + ifconfig ${interface} ${ifx_args} alias delete + alias=`expr ${alias} + 1` + else + break; + fi + done + ;; + esac + + # Remove the network interface and clean the ARP table + ifconfig ${interface} delete + arp -d -a + ;; +esac Property changes on: releng/4.4/etc/pccard_ether ___________________________________________________________________ Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property