Index: head/etc/MAKEDEV =================================================================== --- head/etc/MAKEDEV (revision 62074) +++ head/etc/MAKEDEV (revision 62075) @@ -1,1569 +1,1569 @@ #!/bin/sh - # # Copyright (c) 1990 The Regents of the University of California. # All rights reserved. # # Written and contributed by W. Jolitz 12/90 # # Redistribution and use in source and binary forms are permitted provided # that: (1) source distributions retain this entire copyright notice and # comment, and (2) distributions including binaries display the following # acknowledgement: ``This product includes software developed by the # University of California, Berkeley and its contributors'' in the # documentation or other materials provided with the distribution and in # all advertising materials mentioning features or use of this software. # Neither the name of the University nor the names of its contributors may # be used to endorse or promote products derived from this software without # specific prior written permission. # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. # # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90 # $FreeBSD$ # # Device "make" file. Valid arguments: # all makes all known devices, standard number of units (or close) # std standard devices # jail suitable for a jail(8) # local configuration specific devices # mach-4 mach4&lites+devices for Mach's XFree86 distribution # (see http://www.cs.hut.fi/lites.html for more info on LITES) # # Tapes: # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape # sa* SCSI Sequential Access Devices # # Disks: # acd* ATAPI CD-ROM disks # amrd* AMI MegaRAID # cd* SCSI CD-ROM disks # da* SCSI Direct Access Devices # fd* floppy disk drives (3 1/2", 5 1/4") # fla* M-Systems DiskOnChip # idad* Compaq Smart-2 RAID arrays # matcd* Matsushita (Panasonic) CD-ROM disks # mcd* Mitsumi CD-ROM disks # md* Memory (or malloc) disk # mlx* Mylex DAC960 RAID controllers # mlxd* Mylex DAC960 RAID disk volumes # scd* Sony CD-ROM disks # vn* vnode disks # wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...) # wfd* IDE floppy disk drives (LS-120) # # Console ports: # vty* virtual console devices for syscons/pcvt/codrv # # Pointing devices: # mse* Logitech and ATI Inport bus mouse # psm* PS/2 mouse # sysmouse Mousesystems mouse emulator for syscons # # Time devices: # refclock-* serial ports used by xntpd parse refclocks # # Terminal ports: # tty* general purpose serial ports # cua* dialout serial ports # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices) # cuaA* Specialix SI/XIO dialout ports # ttyD* Digiboard - 16 dialin ports # cuaD* Digiboard - 16 dialout ports # ttyR* Rocketport dialin ports # cuaR* Rocketport dialout ports # # Pseudo terminals: # pty* set of 32 master and slave pseudo terminals # vty* virtual terminals using syscons/pcvt/codrv console # # Parallel port: # lpt* Printer # ppi* Parallel port i/o # pps* Pulse per second timing interface # pcfclock* Parallel time sync interface # # I2C and SMBus: # iic* I2C devices # smb* SMBUS devices # # USB devices: # usb* USB bus control device # uhid* Human Interface Device (HID) # ums* mouse # ulpt* printer # ugen* generic USB device # urio* Diamond Rio 500 # usio* USB serial devices # # SCSI devices (other than CD-ROM, tape and disk): # ch* SCSI Media-Changer (juke box) driver # worm* WORM driver # pt* Processor Type (HP scanner, as one example) # pass* CAM Passthrough device # ses* SES (SCSI Environmental Services) and # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device # # PC-CARD (previously called PCMCIA) support # card* PC-CARD slots # # ISDN devices: # i4b isdnd call control device # i4bctl debugging control device # i4btrc* trace data interface(s), one per passive card # i4btel* telephony interface(s) # i4bteld* telephony dialout interface(s) # i4brbch* raw b channel access device(s) # # Special purpose devices: # apm Advanced Power Management BIOS # apmctl APM BIOS control device # bpf* packet filter # speaker pc speaker # tw* xten power controller # snd* various sound cards # pcaudio PCM audio driver # socksys iBCS2 socket system driver # vat VAT compatibility audio driver (requires snd*) # gsc Genius GS-4500 hand scanner # joy pc joystick # tun* Tunneling IP device # snp* tty snoop devices # spigot Video Spigot video acquisition card # ctx* Cortex-I video acquisition card # meteor* Matrox Meteor video acquisition card (pci) # bktr* Bt848 based video acquisition card (pci) # labpc* National Instrument's Lab-PC and LAB-PC+ # perfmon CPU performance-monitoring counters # pci PCI configuration-space access from user mode # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth) # kbd keyboard devices # 3dfx* 3dfx voodoo device for glide (tdfx), links 3dfx to 3dfx# # if [ -n "$MAKEDEVPATH" ]; then PATH="$MAKEDEVPATH" else PATH=/sbin:/bin fi umask 77 # Usage: die exitcode msg die() { echo $2 exit $1 } # Convert integer to partition name dkitop() { local p case $1 in 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;; *) p="?";; esac echo $p } # Convert integer to slice name dkitos() { local s case $1 in 0) s="";; 1) s="";; *) s=s$(($1-1));; esac echo $s } # Convert disk (type, unit, slice, partition) to minor number dkminor() { echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4)) } # Override mknod(2) to add extra handling to it. mknod() { rm -f "$1" || exit 1 case $# in 4) /sbin/mknod "$@" root:wheel || die 2 "/sbin/mknod $@ failed";; 5) /sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed";; *) die 2 "bad node: mknod $@";; esac } # Convert tape (ctrl, unit, mode, access) to minor number saminor() { echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4)) } # Convert the last character of a tty name to a minor number. ttyminor() { case $unit in [0-9]) m=$unit;; a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;; h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;; o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;; v) m=31;; *) m="?";; esac echo $m } # Raw partition for disks dkrawpart=2 # Compatibility slice for disks dkcompatslice=0 # Raw slice for disks dkrawslice=1 # Standard umasks disk_umask=037 # allow group operator to read disks tape_umask=017 # allow group operator to read/write tapes for i in $*; do case $i in all) sh MAKEDEV std # standard sh MAKEDEV fd0 fd1 # bdev, floppy disk sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs sh MAKEDEV vn0 # bdev, virtual disk sh MAKEDEV cd0 matcd0 mcd0 scd0 # bdev, cdrom sh MAKEDEV sa0 wt0 # bdev, tape sh MAKEDEV vty12 # cdev, virtual tty sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty sh MAKEDEV pty0 # cdev, pseudo tty sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty sh MAKEDEV kbd0 kbd1 # cdev, keyboard sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse sh MAKEDEV pcaudio speaker # cdev, noise sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port sh MAKEDEV iic0 iic1 # cdev, I2C device sh MAKEDEV smb0 smb1 # cdev, SMBus device sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices sh MAKEDEV urio0 # cdev, USB devices too sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop sh MAKEDEV pass4 xpt2 # cdev, CAM sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN ;; # a much restricted set of the above, to save precious i-nodes on the # fixit floppy fixit) sh MAKEDEV std # standard sh MAKEDEV fd0 # bdev, floppy disk sh MAKEDEV da0 # bdev, SCSI disk sh MAKEDEV ad0 # bdev, ATA disk sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices sh MAKEDEV wd0 # bdev, OLD disk sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs sh MAKEDEV vn0 # bdev, virtual disk sh MAKEDEV cd0 # bdev, cdrom sh MAKEDEV sa0 # bdev, tape sh MAKEDEV vty2 # cdev, virtual tty sh MAKEDEV cuaa0 # cdev, serial tty sh MAKEDEV pty0 # cdev, pseudo tty sh MAKEDEV ttyd0 # cdev, serial tty sh MAKEDEV kbd0 # cdev, keyboard sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse sh MAKEDEV lpt0 # cdev, printer sh MAKEDEV ppi0 # cdev, parallel port sh MAKEDEV iic0 # cdev, I2C device sh MAKEDEV smb0 # cdev, SMBus device sh MAKEDEV ums0 # cdev, USB devices sh MAKEDEV tun0 # cdev, network sh MAKEDEV ch0 # cdev, miscellaneous sh MAKEDEV apm apmctl card0 # cdev, laptop sh MAKEDEV pass1 xpt1 # cdev, CAM sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN sh MAKEDEV i4brbch0 # cdev, ISDN rm -f fd/[1-9]? ;; std) mknod console c 0 0; chmod 600 console mknod kmem c 2 1 root:kmem; chmod 640 kmem mknod mem c 2 0 root:kmem; chmod 640 mem mknod null c 2 2; chmod 666 null mknod random c 2 3; chmod 644 random - mknod urandom c 2 4; chmod 644 urandom + ln -sf random urandom mknod zero c 2 12; chmod 666 zero mknod io c 2 14; chmod 600 io mknod tty c 1 0; chmod 666 tty mknod klog c 7 0; chmod 600 klog mknod pci c 78 0; chmod 644 pci mkdir -p fd (cd fd && i=0 && while [ $i -lt 64 ]; do mknod $i c 22 $i i=$(($i + 1)) done ) chmod 555 fd chmod 666 fd/* ln -sf fd/0 stdin ln -sf fd/1 stdout ln -sf fd/2 stderr ;; jail) sh MAKEDEV std pty0 rm mem kmem pci io klog console # for security ln -sf null mem # for libkvm (ab)users ln -sf null kmem # --//-- ln -sf null console ;; mach-4) mknod iopl c 22 0 mknod kbd c 23 0 mknod mouse c 24 0 mknod time c 25 0 mknod timezone c 26 0 ;; # Create device files for new Archive/Wangtek QIC-02 tape driver (vak) wt*) umask $tape_umask u=`expr $i : '..\(.*\)'` if [ -z "${u}" ]; then u=0; fi # default density, 512b blocks mknod rwt${u} c 10 `expr 0 + $u` root:operator mknod nrwt${u} c 10 `expr 4 + $u` root:operator # default density, 1024b blocks # mknod rWt${u} c 10 `expr 64 + $u` root:operator # mknod nrWt${u} c 10 `expr 68 + $u` root:operator mknod rwt${u}b c 10 `expr 16 + $u` root:operator # 60 megabytes mknod nrwt${u}b c 10 `expr 20 + $u` root:operator mknod rwt${u}c c 10 `expr 24 + $u` root:operator # 120 megabytes mknod nrwt${u}c c 10 `expr 28 + $u` root:operator mknod rwt${u}d c 10 `expr 32 + $u` root:operator # 150 megabytes mknod nrwt${u}d c 10 `expr 36 + $u` root:operator # mknod rwt${u}e c 10 `expr 40 + $u` root:operator # 300 megabytes? # mknod nrwt${u}e c 10 `expr 44 + $u` root:operator # mknod rwt${u}f c 10 `expr 48 + $u` root:operator # 600 megabytes? # mknod nrwt${u}f c 10 `expr 52 + $u` root:operator umask 77 ;; # Individual slices. ad*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|md*s*|mlxd*s*|twed*s*|vn*s*|wd*s*|wfd*s*) umask $disk_umask case $i in ad*s*) name=ad; chr=116;; afd*s*) name=afd; chr=118;; amrd*s*) name=amrd; chr=133;; da*s*) name=da; chr=13;; fla*s*) name=fla; chr=102;; idad*s*) name=idad; chr=109;; md*s*) name=md; chr=95;; mlxd*s*) name=mlxd; chr=131;; twed*s*) name=twed; chr=147;; vn*s*) name=vn; chr=43;; wd*s*) name=wd; chr=3;; wfd*s*) name=wfd; chr=87;; esac case $i in amrd*s*|idad*s*|mlxd*s*|twed*s*) unit=`expr $i : '....\([0-9]*\)s'` slice=`expr $i : '....[0-9]*s\([0-9]*\)'` part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'` ;; afd*s*|fla*s*|wfd*s*) unit=`expr $i : '...\([0-9]*\)s'` slice=`expr $i : '...[0-9]*s\([0-9]*\)'` part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'` ;; *) unit=`expr $i : '..\([0-9]*\)s'` slice=`expr $i : '..[0-9]*s\([0-9]*\)'` part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'` ;; esac case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) case $slice in [0-9]|[1-2][0-9]|30) oldslice=$slice slice=$(($slice+1)) slicename=`dkitos $slice` minor=`dkminor 0 $unit $slice $dkrawpart` mknod $name$unit$slicename c $chr $minor root:operator ln -f $name$unit$slicename r$name$unit$slicename case $part in [a-h]) case $oldslice in 0) slice=$oldslice ;; esac for part in 0 1 2 3 4 5 6 7 do minor=`dkminor 0 $unit $slice $part` partname=`dkitop $part` mknod $name$unit$slicename$partname \ c $chr $minor root:operator ln -f $name$unit$slicename$partname \ r$name$unit$slicename$partname done ;; "") ;; *) echo bad partition for disk in: $i ;; esac ;; *) echo bad slice for disk in: $i ;; esac ;; *) echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)" ;; esac umask 77 ;; fd*) umask $disk_umask unit=`expr $i : '..\(.*\)'` name=fd; chr=9 case $unit in 0|1|2|3) mknod ${name}${unit} c $chr `expr $unit '*' 64` root:operator ln -f ${name}${unit} r${name}${unit} # Fake BSD partitions for i in a b c d e f g h do ln -f ${name}${unit} ${name}${unit}$i ln -f r${name}${unit} r${name}${unit}$i done # User-readable and programmer-readable name sets mknod ${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1` \ root:operator ln -f ${name}${unit}.1720 r${name}${unit}.1720 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21 # ln -f r${name}${unit}.1720 r${name}${unit}135hs21 mknod ${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2` \ root:operator ln -f ${name}${unit}.1480 r${name}${unit}.1480 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18 # ln -f r${name}${unit}.1480 r${name}${unit}135hs18 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18 # ln -f r${name}${unit}.1480 r${name}${unit}96hs18 mknod ${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3` \ root:operator ln -f ${name}${unit}.1440 r${name}${unit}.1440 # ln -f ${name}${unit}.1440 ${name}${unit}135 # ln -f r${name}${unit}.1440 r${name}${unit}135 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18 # ln -f r${name}${unit}.1440 r${name}${unit}135ds18 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18 # ln -f r${name}${unit}.1440 r${name}${unit}96ds18 mknod ${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4` \ root:operator ln -f ${name}${unit}.1200 r${name}${unit}.1200 # ln -f ${name}${unit}.1200 ${name}${unit}96 # ln -f r${name}${unit}.1200 r${name}${unit}96 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15 # ln -f r${name}${unit}.1200 r${name}${unit}96ds15 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15 # ln -f r${name}${unit}.1200 r${name}${unit}135ds15 mknod ${name}${unit}.820 c $chr `expr $unit '*' 64 + 5` \ root:operator ln -f ${name}${unit}.820 r${name}${unit}.820 # ln -f ${name}${unit}.820 ${name}${unit}96hs10 # ln -f r${name}${unit}.820 r${name}${unit}96hs10 # ln -f ${name}${unit}.820 ${name}${unit}135hs10 # ln -f r${name}${unit}.820 r${name}${unit}135hs10 mknod ${name}${unit}.800 c $chr `expr $unit '*' 64 + 6` \ root:operator ln -f ${name}${unit}.800 r${name}${unit}.800 # ln -f ${name}${unit}.800 ${name}${unit}96ds10 # ln -f r${name}${unit}.800 r${name}${unit}96ds10 # ln -f ${name}${unit}.800 ${name}${unit}135ds10 # ln -f r${name}${unit}.800 r${name}${unit}135ds10 mknod ${name}${unit}.720 c $chr `expr $unit '*' 64 + 7` \ root:operator ln -f ${name}${unit}.720 r${name}${unit}.720 # ln -f ${name}${unit}.720 ${name}${unit}96ds9 # ln -f r${name}${unit}.720 r${name}${unit}96ds9 # ln -f ${name}${unit}.720 ${name}${unit}135ds9 # ln -f r${name}${unit}.720 r${name}${unit}135ds9 mknod ${name}${unit}.360 c $chr `expr $unit '*' 64 + 8` \ root:operator ln -f ${name}${unit}.360 r${name}${unit}.360 # ln -f ${name}${unit}.360 ${name}${unit}48 # ln -f r${name}${unit}.360 r${name}${unit}48 # ln -f ${name}${unit}.360 ${name}${unit}48ds9 # ln -f r${name}${unit}.360 r${name}${unit}48ds9 mknod ${name}${unit}.640 c $chr `expr $unit '*' 64 + 9` \ root:operator ln -f ${name}${unit}.640 r${name}${unit}.640 # ln -f ${name}${unit}.640 ${name}${unit}96ds8 # ln -f r${name}${unit}.640 r${name}${unit}96ds8 # ln -f ${name}${unit}.640 ${name}${unit}135ds8 # ln -f r${name}${unit}.640 r${name}${unit}135ds8 mknod ${name}${unit}.1232 c $chr `expr $unit '*' 64 + 10` \ root:operator ln -f ${name}${unit}.1232 r${name}${unit}.1232 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8 # ln -f r${name}${unit}.1232 r${name}${unit}96ds8 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8 # ln -f r${name}${unit}.1232 r${name}${unit}135ds8 ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; ad*|afd*|amrd*|da*|fla*|idad*|md*|mlxd*|twed*|vn*|wd*|wfd*) umask $disk_umask case $i in ad*) name=ad; chr=116;; afd*) name=afd; chr=118;; amrd*) name=amrd; chr=133;; da*) name=da; chr=13;; fla*) name=fla; chr=102;; idad*) name=idad; chr=109;; md*) name=md; chr=95;; mlxd*) name=mlxd; chr=131;; twed*) name=twed; chr=147;; vn*) name=vn; chr=43;; wd*) name=wd; chr=3;; wfd*) name=wfd; chr=87;; esac case $i in amrd*|idad*|mlxd*|twed*) unit=`expr $i : '....\(.*\)'` ;; afd*|fla*|wfd*) unit=`expr $i : '...\(.*\)'` ;; *) unit=`expr $i : '..\(.*\)'` ;; esac case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) for slicepartname in s0h s1 s2 s3 s4 do sh MAKEDEV $name$unit$slicepartname done ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; ccd*) umask $disk_umask name=ccd chr=74 unit=`expr $i : '...\(.*\)'` case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) for part in 0 1 2 3 4 5 6 7 do minor=`dkminor 0 $unit 0 $part` partname=`dkitop $part` mknod $name$unit$partname c $chr $minor root:operator ln -f $name$unit$partname r$name$unit$partname done ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; # SCSI processor type driver pt[0-9]*) chr=61 name=pt unit=`expr $i : 'pt\([0-9][0-9]*\)'` if [ -z "${unit}" ]; then unit=0 fi unit=`expr $unit + 1 - 1` mknod ${name}${unit} c $chr $unit ;; # SCSI SES/SAF-TE type driver ses[0-9]*) chr=110 name=ses unit=`expr $i : 'ses\([0-9][0-9]*\)'` if [ -z "${unit}" ]; then unit=0 fi unit=`expr $unit + 1 - 1` mknod ${name}${unit} c $chr $unit ;; # SCSI target mode sample driver targ[0-9]*) chr=65 name=targ unit=`expr $i : 'targ\([0-9][0-9]*\)'` if [ -z "${unit}" ]; then unit=0 fi unit=`expr $unit + 1 - 1` mknod ${name}${unit} c $chr $unit mknod ${name}.ctl c $chr 0xffff00ff ;; # CAM transport layer device xpt*) # This major number is temporary chr=104 name=xpt units=`expr $i : 'xpt\(.*\)'` if [ -z "${units}" ]; then units=1 fi i=0 while [ $i -lt $units ]; do dname=$name$i rm -rf $dname r$dname mknod $dname c $chr $i root:operator i=$(($i + 1)) done ;; # CAM passthrough device pass*) # This major number is temporary chr=31 name=pass units=`expr $i : 'pass\(.*\)'` if [ -z "${units}" ]; then units=1 fi i=0 while [ $i -lt $units ]; do dname=$name$i rm -rf $dname r$dname mknod $dname c $chr $i root:operator i=$(($i + 1)) done ;; pty*) class=`expr $i : 'pty\(.*\)'` case $class in 0) offset=0 name=p;; 1) offset=32 name=q;; 2) offset=64 name=r;; 3) offset=96 name=s;; # Note that xterm (at least) only look at p-s. 4) offset=128 name=P;; 5) offset=160 name=Q;; 6) offset=192 name=R;; 7) offset=224 name=S;; # This still leaves [tuTU]. *) echo bad unit for pty in: $i;; esac umask 0 case $class in 0|1|2|3|4|5|6|7) i=0 while [ $i -lt 32 ]; do # This was an awk substr() before. c=$(echo 0123456789abcdefghijklmnopqrstuv | dd bs=1 skip=$i count=1 2>/dev/null) mknod tty$name$c c 5 $(($offset + $i)) mknod pty$name$c c 6 $(($offset + $i)) i=$(($i + 1)) done ;; esac umask 77 ;; sa*) umask $tape_umask unit=`expr $i : '..\(.*\)'` chr=14 case $unit in [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]) mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0` ln -f sa${unit}.ctl rsa${unit}.ctl for m in 0 1 2 3 do mknod sa${unit}.${m} c $chr \ `saminor 0 ${unit} ${m} 0` root:operator ln -f sa${unit}.${m} rsa${unit}.${m} mknod nsa${unit}.${m} c $chr \ `saminor 0 ${unit} ${m} 1` root:operator ln -f nsa${unit}.${m} nrsa${unit}.${m} mknod esa${unit}.${m} c $chr \ `saminor 0 ${unit} ${m} 2` root:operator ln -f esa${unit}.${m} ersa${unit}.${m} done ln -f sa${unit}.0 sa${unit} ln -f sa${unit}.0 rsa${unit}.0 ln -f sa${unit}.0 rsa${unit} ln -f nsa${unit}.0 nsa${unit} ln -f nsa${unit}.0 nrsa${unit}.0 ln -f nsa${unit}.0 nrsa${unit} ln -f esa${unit}.0 esa${unit} ln -f esa${unit}.0 ersa${unit}.0 ln -f esa${unit}.0 ersa${unit} ;; *) echo bad unit for tape in: $i ;; esac umask 77 ;; ch*) umask 37 unit=`expr $i : '..\(.*\)'` case $i in ch*) name=ch; chr=17;; esac case $unit in 0|1|2|3|4|5|6) mknod ${name}${unit} c $chr $unit root:operator ;; *) echo bad unit for media changer in: $i ;; esac umask 77 ;; ast*) umask 2 ; unit=`expr $i : '...\(.*\)'` chr=119 case $unit in 0|1|2|3) mknod rast${unit} c $chr `expr $unit '*' 8 + 0` root:operator chmod 640 rast${unit} mknod nrast${unit} c $chr `expr $unit '*' 8 + 1` root:operator chmod 640 nrast${unit} ;; *) echo bad unit for tape in: $i ;; esac umask 77 ;; acd*|cd*|mcd*|scd*) umask $disk_umask case $i in acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;; cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;; mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;; scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;; esac if [ -z "${units}" -o "${units}" -le 0 ]; then units=1 fi if [ "${units}" -le 31 ]; then i=0 while [ $i -le $units ]; do dname=$name$i rm -rf ${dname}* r${dname}* mknod ${dname}a c $chr $(($i * 8)) root:operator mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator ln -f ${dname}a r${dname}a ln -f ${dname}c r${dname}c i=$(($i + 1)) done else echo "$i is invalid -- can't have more than 32 cd devices" fi umask 77 ;; matcd*) umask 2 case $i in matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; chr=46;; esac case $unit in 0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15) mknod ${name}${unit}a c $chr `expr $unit '*' 8 + 0` \ root:operator mknod ${name}${unit}c c $chr `expr $unit '*' 8 + 2` \ root:operator ln -f ${name}${unit}a r${name}${unit}a ln -f ${name}${unit}c r${name}${unit}c chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h] mknod ${name}${unit}la c $chr `expr $unit '*' 8 + 128` \ root:operator mknod ${name}${unit}lc c $chr `expr $unit '*' 8 + 130` \ root:operator ln -f ${name}${unit}la r${name}${unit}la ln -f ${name}${unit}lc r${name}${unit}lc chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; wcd*) umask 2 ; unit=`expr $i : '...\(.*\)'` chr=69 case $unit in 0|1|2|3|4|5|6|7) mknod wcd${unit}a c $chr `expr $unit '*' 8 + 0` root:operator mknod wcd${unit}c c $chr `expr $unit '*' 8 + 2` root:operator ln -f wcd${unit}a rwcd${unit}a ln -f wcd${unit}c rwcd${unit}c chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; wst*) umask 2 ; unit=`expr $i : '...\(.*\)'` chr=90 case $unit in 0|1|2|3) mknod rwst${unit} c $chr `expr $unit '*' 8 + 0` root:operator chmod 640 rwst${unit} ;; esac umask 77 ;; iic*) unit=`expr $i : 'iic\(.*\)'` mknod iic$unit c 105 $unit ;; smb*) unit=`expr $i : 'smb\(.*\)'` mknod smb$unit c 106 $unit ;; pcfclock*) unit=`expr $i : 'pcfclock\(.*\)'` mknod pcfclock$unit c 140 $unit ;; ppi*) unit=`expr $i : 'ppi\(.*\)'` mknod ppi$unit c 82 $unit ;; pps*) unit=`expr $i : 'pps\(.*\)'` mknod pps$unit c 89 $unit ;; usb) mknod usb$unit c 108 255 root:operator chmod 0660 usb$unit ;; usb*) unit=`expr $i : 'usb\(.*\)'` mknod usb$unit c 108 $unit root:operator chmod 0660 usb$unit ;; uhid*) unit=`expr $i : 'uhid\(.*\)'` mknod uhid$unit c 122 $unit ;; ums*) unit=`expr $i : 'ums\(.*\)'` mknod ums$unit c 111 $unit ;; ulpt*) unit=`expr $i : 'ulpt\(.*\)'` minor=$unit mknod ulpt$unit c 113 $minor minor=`expr $unit + 64` mknod unlpt$unit c 113 $minor # and the 'no prime' version ;; ugen*) unit=`expr $i : 'ugen\([0-9][0-9]*\)'` endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'` if [ -z "${unit}" ]; then echo $i - Invalid unit number fi if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15 mknod ugen$unit c 114 $(($unit * 16)) i=1 while [ $i -lt 16 ]; do mknod ugen$unit.$i c 114 $(($unit * 16 + $i)) i=$(($i + 1)) done else minor=$(($unit * 16 + $endpoint)) mknod ugen$unit.$endpoint c 114 $minor fi ;; urio*) unit=`expr $i : 'urio\(.*\)'` mknod urio$unit c 143 $unit ;; usio*) unit=`expr $i : 'usio\(.*\)'` minor=$(($minor + 128)) mknod usio$unit c 138 $minor ;; lpt*) unit=`expr $i : 'lpt\(.*\)'` mknod lpt$unit c 16 $unit mknod lpctl$unit c 16 `expr $unit + 128` ;; tw*) unit=`expr $i : 'tw\(.*\)'` mknod tw$unit c 19 $unit root:operator ;; # Use this to create virtual consoles for syscons, pcvt or codrv # ttyv0-b # use as MAKEDEV vtyNN to create NN entries vty*) chr=12 units=`expr $i : 'vty\(.*\)'` i=0 while [ $i -lt $units ]; do mknod ttyv$(printf %01x $i) c $chr $i i=$(($i + 1)) done ln -fs ttyv0 vga # XXX X still needs this pccons relic ;; bpf*) nbpf=`expr $i : 'bpf\(.*\)$'` unit=0 while [ $unit -le $nbpf ]; do mknod bpf$unit c 23 $unit unit=$(($unit + 1)) done ;; speaker) mknod speaker c 26 0 ;; cuaa?|cua?) umask 7 unit=`expr $i : 'cua.*\(.\)$'` m=`ttyminor $unit` mknod cuaa$unit c 28 `expr $m + 128` uucp:dialer mknod cuaia$unit c 28 `expr $m + 32 + 128` uucp:dialer mknod cuala$unit c 28 `expr $m + 64 + 128` uucp:dialer umask 77 ;; tty0?|ttyd?|tty?) unit=`expr $i : 'tty.*\(.\)$'` m=`ttyminor $unit` mknod ttyd$unit c 28 $m mknod ttyid$unit c 28 `expr $m + 32` mknod ttyld$unit c 28 `expr $m + 64` ;; cuac?) umask 7 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v" major=48 card=`expr $i : 'cua.*\(.\)$'` for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor` name=$card$unit mknod cuac$name c $major `expr $minor + 128` uucp:dialer mknod cuaic$name c $major `expr $minor + 32 + 128` uucp:dialer mknod cualc$name c $major `expr $minor + 64 + 128` uucp:dialer done umask 77 ;; ttyc?) portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v" major=48 card=`expr $i : 'tty.*\(.\)$'` for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor` name=$card$unit mknod ttyc$name c $major $minor mknod ttyic$name c $major `expr $minor + 32` mknod ttylc$name c $major `expr $minor + 64` done ;; # RISCom8 'rc' driver entries cuam?) umask 7 unit=`expr $i : 'cua.*\(.\)$'` m=`ttyminor $unit` mknod cuam$unit c 63 `expr $m + 128` uucp:dialer umask 77 ;; ttym?) unit=`expr $i : 'tty.*\(.\)$'` m=`ttyminor $unit` mknod ttym$unit c 63 $m ;; # Specialix SI/XIO. # Note: these are 'base 1' to match the numbers on the panels, and to match # the manual that comes with the system. ttyA*) major=68 nports=`expr $i : 'ttyA\(.*\)$'` port=1 while [ $port -le $nports ]; do minor=$(expr $port - 1) name=$(printf %02d $port) mknod ttyA$name c $major $minor mknod ttyiA$name c $major `expr $minor + 65536` mknod ttylA$name c $major `expr $minor + 131072` port=$(($port + 1)) done # For the user-mode control program, 'sicontrol' mknod si_control c 68 262144 ;; cuaA*) umask 7 major=68 nports=`expr $i : 'cuaA\(.*\)$'` port=1 while [ $port -le $nports ]; do minor=$(expr $port - 1) name=$(printf %02d $port) mknod cuaA$name c $major `expr $minor + 128` uucp:dialer mknod cuaiA$name c $major `expr $minor + 128 + 65536` \ uucp:dialer mknod cualA$name c $major `expr $minor + 128 + 131072` \ uucp:dialer port=$(($port + 1)) done umask 77 ;; # Digiboard PC/?? 16 port card. # The current scheme of minor numbering is: # # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5} # # CARD bitfield in future versions may be extended to 3 bits. # # See dgb(4) # ttyD?) portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" major=58 card=`expr $i : 'tty.*\(.\)$'` for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor` name=$card$unit mknod ttyD$name c $major $minor mknod ttyiD$name c $major `expr $minor + 32` mknod ttylD$name c $major `expr $minor + 64` done ;; cuaD?) umask 7 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" major=58 card=`expr $i : 'cua.*\(.\)$'` for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor` name=$card$unit mknod cuaD$name c $major `expr $minor + 128` uucp:dialer mknod cuaiD$name c $major `expr $minor + 32 + 128` uucp:dialer mknod cualD$name c $major `expr $minor + 64 + 128` uucp:dialer done umask 77 ;; ttyM*) portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" modulelist="a b c d" major=101 card=`expr $i : 'tty.*\(.\)$'` for unit in $modulelist do moduleminor=`ttyminor $unit` moduleminor=`expr $moduleminor % 10 \* 16` modulename=$unit for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor + $moduleminor` name=$card$modulename$unit rm -f tty*M$name mknod ttyM$name c $major $minor mknod ttyiM$name c $major `expr $minor + 64` mknod ttylM$name c $major `expr $minor + 128` done done ;; cuaM?) umask 7 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" modulelist="a b c d" major=101 card=`expr $i : 'cua.*\(.\)$'` for unit in $modulelist do moduleminor=`ttyminor $unit` moduleminor=`expr $moduleminor % 10 \* 16` modulename=$unit for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor + $moduleminor` name=$card$modulename$unit rm -f cua*M$name mknod cuaM$name c $major `expr $minor + 262144` \ uucp:dialer mknod cuaiM$name c $major `expr $minor + 64 + 262144` \ uucp:dialer mknod cualM$name c $major `expr $minor + 128 + 262144` \ uucp:dialer done done umask 77 ;; ttyR?) major=81 BOARD=1; Rnum=0 MINOR=$(($BOARD * 65536)) controllers=$( dmesg | while read first rest; do case "$first" in RocketPort[0-4]) echo "$first" ;; esac done ) rm -f /dev/ttyR* /dev/ttyiR* /dev/ttylR* for i in $controllers; do ndevices=$( dmesg | while read first bar ports rest; do case "$first" in $i*) echo "$ports" ;; esac done ) echo -n "Creating $ndevices devices for $i: " dev=0 while [ $dev -lt $ndevices ]; do mknod /dev/ttyR$Rnum c $major $MINOR mknod /dev/ttyiR$Rnum c $major $(($MINOR + 32)) mknod /dev/ttylR$Rnum c $major $(($MINOR + 64)) Rnum=$(($Rnum + 1)) MINOR=$(($MINOR + 1)) dev=$(($dev + 1)) done BOARD=$(($BOARD + 1)) MINOR=$(($BOARD * 65536)) echo " " done ;; cuaR?) major=81 BOARD=1; Rnum=0 MINOR=$(($BOARD * 65536)) controllers=$( dmesg | while read first rest; do case "$first" in RocketPort[0-4]) echo "$first" ;; esac done ) rm -f /dev/cuaR* /dev/cuaiR* /dev/cualR* for i in $controllers; do ndevices=$( dmesg | while read first bar ports rest; do case "$first" in $i*) echo "$ports" ;; esac done ) echo -n "Creating $ndevices devices for $i: " dev=0 while [ $dev -lt $ndevices ]; do mknod /dev/cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer mknod /dev/cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \ uucp:dialer mknod /dev/cualR$Rnum c $major $(($MINOR + 128 + 64)) \ uucp:dialer Rnum=$(($Rnum + 1)) MINOR=$(($MINOR + 1)) dev=$(($dev + 1)) done BOARD=$(($BOARD + 1)) MINOR=$(($BOARD * 65536)) echo " " done ;; mse*) unit=`expr $i : 'mse\(.*\)'` chr=27 mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11 ;; psm*) unit=`expr $i : 'psm\(.*\)'` chr=21 mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11 ;; mouse*) name=`expr $i : 'mouse\(.*\)'` if [ ! -c $name ]; then $0 $name # make the appropriate device fi ln -fs $name mouse ;; pcaudio) mknod pcaudio c 24 0 mknod pcaudioctl c 24 128 ;; socksys) mknod socksys c 41 0 mknod spx c 41 1 ln -fs socksys nfsd chmod 666 socksys nfsd spx ;; snd*) # # changes from Linux voxware # minor Linux FreeBSD # 8 sequencer2 (aka music0) music0 # 17 patmgr0 sequencer1 # 33 patmgr1 sequencer2 # unit=`expr $i : 'snd\(.*\)'` chr=30 # XXX write this less verbosely, like std snd_security_hole=0 # XXX umask $snd_security_hole ln -fs mixer$unit mixer ln -fs sequencer$unit sequencer ln -fs dsp$unit dsp ln -fs audio$unit audio ln -fs dspW$unit dspW ln -fs music$unit music ln -fs pss$unit pss mknod mixer$unit c $chr `expr $unit '*' 16 + 0` mknod sequencer$unit c $chr `expr $unit '*' 16 + 1` mknod midi$unit c $chr `expr $unit '*' 16 + 2` mknod dsp$unit c $chr `expr $unit '*' 16 + 3` mknod audio$unit c $chr `expr $unit '*' 16 + 4` mknod dspW$unit c $chr `expr $unit '*' 16 + 5` mknod sndstat c $chr 6 # minor number 7 is unused mknod music$unit c $chr `expr $unit '*' 16 + 8` mknod pss$unit c $chr `expr $unit '*' 16 + 9` # minor numbers 10-15 are unused umask 77 ;; vat) mknod vatio c 25 128 chmod 660 vatio ;; gsc*) unit=`expr $i : 'gsc\(.*\)'` mknod gsc${unit} c 47 $unit mknod gsc${unit}p c 47 $(($unit + 8)) mknod gsc${unit}d c 47 $(($unit + 32)) mknod gsc${unit}pd c 47 $(($unit + 40)) chmod 666 gsc${unit}* ;; apm) mknod apm c 39 0 root:operator chmod 660 apm ;; apmctl) mknod apmctl c 39 8 root:operator chmod 660 apmctl ;; card*) unit=`expr $i : 'card\(.*\)'` chr=50 mknod card$unit c $chr $unit chmod 644 card$unit ;; ttyx?|ttyy?|ttyz?) case $i in *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;; *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;; *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;; *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;; esac case $i in ttyy?) unit=`expr $unit \+ 16`;; ttyz?) unit=`expr $unit \+ 32`;; esac mknod $i c 42 $unit ;; cronyx) mknod cronyx c 42 63 ;; joy) mknod joy0 c 51 0 root:operator mknod joy1 c 51 1 root:operator chmod 640 joy0 joy1 ;; spigot) mknod spigot c 11 0 chmod 444 spigot ;; ctx?) unit=`expr $i : 'ctx\(.*\)'` mknod ctx$unit c 40 $unit chmod 444 ctx$unit ;; meteor?) unit=`expr $i : 'meteor\(.*\)'` mknod meteor$unit c 67 $unit chmod 444 meteor$unit ;; bktr?) unit=`expr $i : 'bktr\(.*\)'` mknod bktr$unit c 92 $unit mknod tuner$unit c 92 $((16 + $unit )) mknod vbi$unit c 92 $((32 + $unit )) chmod 444 bktr$unit tuner$unit vbi$unit ;; tun*) ntun=`expr $i : 'tun\(.*\)$'` unit=0 while [ $unit -le $ntun ]; do mknod tun$unit c 52 $unit uucp:dialer unit=$(($unit + 1)) done ;; sysmouse) mknod sysmouse c 12 128 mknod consolectl c 12 255 ;; snp?) unit=`expr $i : 'snp\(.*\)'` mknod snp$unit c 53 $unit ;; # dufault@hda.com: If I do much more work on other A-D boards # then eventually we'll have a "ad" and "dio" interface and some of these # "labpcaio" ones will be gone. # labpcaio: D-A and A-D. # labpcdio: Digital in and Digital out. # labpc*) umask 7 case $i in labpcaio*) name=labpcaio unit=`expr $i : 'labpcaio\(.*\)'` all="0 1 2 3 4 5 6 7" offset=0 ;; labpcdio*) name=labpcdio unit=`expr $i : 'labpcdio\(.*\)'` all="0 1 2 3" offset=8 ;; *) die 3 "Don't know LabPC type $i" ;; esac if [ -z "${unit}" ]; then unit=all fi case $unit in 0|1|2|3|4|5|6|7) mknod $name$unit c 66 `expr $offset + $unit ` ;; all) for i in $all do mknod $name$i c 66 `expr $offset + $i ` done ;; *) echo "No such LabPC unit: $unit" ;; esac umask 77 ;; perfmon) mknod perfmon c 2 32 root:kmem chmod 640 perfmon ;; ipl) mknod ipl c 79 0 mknod ipnat c 79 1 mknod ipstate c 79 2 mknod ipauth c 79 3 ;; kbd*) unit=`expr $i : 'kbd\(.*\)'` chr=112 mknod kbd$unit c $chr $unit ;; i4b) mknod i4b c 60 0 ;; i4bctl) mknod i4bctl c 55 0 ;; i4brbch*) unit=`expr $i : 'i4brbch\(.*\)'` mknod i4brbch$unit c 57 $unit ;; i4bteld*) offset=64 unit=`expr $i : 'i4bteld\(.*\)'` mknod i4bteld$unit c 56 `expr $offset + $unit ` ;; i4btel*) unit=`expr $i : 'i4btel\(.*\)'` mknod i4btel$unit c 56 $unit ;; i4btrc*) unit=`expr $i : 'i4btrc\(.*\)'` mknod i4btrc$unit c 59 $unit ;; mlx*) unit=`expr $i : 'mlx\(.*\)'` mknod mlx$unit c 130 $unit ;; 3dfx*) unit=`expr $i : '3dfx\(.*\)'` mknod 3dfx$unit c 107 $unit ln -s 3dfx$unit 3dfx ;; twe*) unit=`expr $i : 'twe\(.*\)'` mknod twe$unit c 146 $unit ;; local) umask 0 # XXX should be elsewhere sh MAKEDEV.local umask 77 ;; *) echo $i - no such device name ;; esac done Index: head/etc/defaults/rc.conf =================================================================== --- head/etc/defaults/rc.conf (revision 62074) +++ head/etc/defaults/rc.conf (revision 62075) @@ -1,319 +1,318 @@ #!/bin/sh # # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. You should # not edit this file! Put any overrides into one of the ${rc_conf_files} # instead and you will be able to update these defaults later without # spamming your local configuration information. # # The ${rc_conf_files} files should only contain values which override # values set in this file. This eases the upgrade path when defaults # are changed and new features are added. # # All arguments must be in double or single quotes. # # $FreeBSD$ ############################################################## ### Important initial Boot-time options #################### ############################################################## swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). apmd_enable="NO" # Run apmd to handle APM event from userland. apmd_flags="" # Flags to apmd (if enabled). pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_beep="1" # pccard beep type. pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). pccardd_flags="" # Additional flags for pccardd. pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. rc_conf_files="/etc/rc.conf /etc/rc.conf.local" ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network options: ### hostname="" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). dhcp_program="/sbin/dhclient" # Path to dhcp client program. dhcp_flags="" # Additional flags to pass to dhcp client. firewall_enable="NO" # Set to YES to enable firewall functionality firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display firewall_logging="NO" # Set to YES to enable events logging firewall_flags="" # Flags passed to ipfw when type is a file ip_portrange_first="NO" # Set first dynamically allocated port ip_portrange_last="NO" # Set last dynamically allocated port ipsec_enable="NO" # Set to YES to run setkey on ipsec_file ipsec_file="/etc/ipsec.conf" # Name of config file for setkey natd_program="/sbin/natd" # path to natd, if you want a different one. natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="fxp0" # Public interface or IPaddress to use. natd_flags="" # Additional flags for natd. tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions. log_in_vain="NO" # YES to log connects to ports w/o listeners. tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). # For the following two options, you need to have TCP_DROP_SYNFIN and # TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details. tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN # NOTE: this violates the TCP specification tcp_restrict_rst="NO" # Set to YES to restrict emission of RST icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets network_interfaces="auto" # List of network interfaces (or "auto"). ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. #ifconfig_ed0_alias0="inet6 fec0:0000:0000:0005::1 prefixlen 64" # Sample alias entry for IPv6. # # If you have any sppp(4) interfaces above, you might also want to set # the following parameters. Refer to spppcontrol(8) for their meaning. sppp_interfaces="" # List of sppp interfaces. #sppp_interfaces="isp0" # example: sppp over ISDN #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" # User ppp configuration. ppp_enable="NO" # Start user-ppp (or NO). ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". # For details see man page for ppp(8). Default is auto. ppp_nat="YES" # Use PPP's internal network address translation or NO. ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. ### Network daemon (miscellaneous) & NFS options: ### syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_flags="-s" # Flags to syslogd (if enabled). inetd_enable="YES" # Run the network daemon dispatcher (or NO). inetd_flags="-wW" # Optional flags to inetd # # named. It may be possible to run named in a sandbox, man security for # details. # named_enable="NO" # Run named, the DNS server (or NO). named_program="named" # path to named, if you want a different one. named_flags="" # Flags for named #named_flags="-u bind -g bind" # Flags for named kerberos_server_enable="NO" # Run a kerberos master server (or NO). kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on # a slave kerberos server kerberos_stash="" # Is the kerberos master key stashed? rwhod_enable="NO" # Run the rwho daemon (or NO). rwhod_flags="" # Flags for rwhod amd_enable="NO" # Run amd service with $amd_flags (or NO). amd_flags="-a /.amd_mnt -c 1800 -l syslog /host /etc/amd.map /net /etc/amd.map" amd_map_program="NO" # Can be set to "ypcat -k amd.master" nfs_client_enable="NO" # This host is an NFS client (or NO). nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). nfs_access_cache="2" # Client cache timeout in seconds nfs_server_enable="NO" # This host is an NFS server (or NO). nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). single_mountd_enable="NO" # Run mountd only (or NO). mountd_flags="-r" # Flags to mountd (if NFS server enabled). nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). portmap_enable="YES" # Run the portmapper service (or NO). portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. portmap_flags="" # Flags to portmap (if enabled). rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). keyserv_flags="" # Flags to keyserv (if enabled). rarpd_enable="NO" # Run rarpd (or NO). rarpd_flags="" # Flags to rarpd. xtend_enable="NO" # Run the X-10 power controller daemon. xtend_flags="" # Flags to xtend (if enabled). pppoed_enable="NO" # Run the PPP over Ethernet daemon. pppoed_provider="*" # Provider and ppp(8) config file entry. pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). pppoed_interface="fxp0" # The interface that pppoed runs on. sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. sshd_enable="NO" # Enable sshd sshd_flags="" # Additional flags for sshd. ### Network Time Services options: ### timed_enable="NO" # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled). ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. ntpdate_flags="" # Flags to ntpdate (if enabled). xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). xntpd_program="ntpd" # path to ntpd, if you want a different one. xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). # Network Information Services (NIS) options: ### nis_client_enable="NO" # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="NO" # Set to YES if this host will be a gateway. router_enable="NO" # Set to YES to enable a routing daemon. router="routed" # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon. mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). mrouted_flags="" # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") accept_sourceroute="NO" # accept source routed packets to us ### ATM interface options: ### atm_enable="NO" # Configure ATM interfaces (or NO). #atm_netif_hea0="atm 1" # Network interfaces for physical interface. #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). #atm_macaddr_hea0="NO" # Override physical MAC address (or NO). #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). atm_pvcs="" # Set to PVC list (or leave empty). atm_arps="" # Set to permanent ARP list (or leave empty). ### ISDN interface options: ### isdn_enable="NO" # Enable the ISDN subsystem (or NO). isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). isdn_flags="-dn -d0x1f9" # Flags for isdnd isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace ### Miscellaneous network options: ### icmp_bmcastecho="NO" # respond to broadcast ping packets ### IPv6 options: ### ipv6_enable="NO" # Set to YES to set up for IPv6. ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). ipv6_static_routes="" # Set to static route list (or leave empty). #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 # route toward loopback interface. #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. ipv6_router_flags="" # Flags to IPv6 routing daemon. #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local # addrs. #ipv6_network_interfaces="ed0 ep0" # Examples for router. # Choose correct prefix value. #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. ipv6_default_interface="" # Default output interface for scoped addrs. # Now this works only for IPv6 link local # multicast addrs. prefixcmd_enable="YES" # Use prefix command to assign router prefix. rtadvd_enable="YES" # Set to YES to enable an IPv6 router # advertisement daemon. If set to YES, # this router becomes a possible candidate # IPv6 default router for local subnets. mroute6d_enable="NO" # Do IPv6 multicast routing. mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing # daemon. mroute6d_flags="" # Flags to IPv6 multicast routing daemon. gif_interfaces="NO" # List of GIF tunnels (or "NO"). #gif_interfaces="gif0 gif1" # Examples typically for a router. # Choose correct tunnel addrs. #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 # tunneling interface. Specify this entry # to enable 6to4 interface. stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, # to limit peer addr range. Effective value # is 0-31. stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. # If you like, you can set "AUTO" for this. stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 ipv6_ipv4mapping="YES"; # Leave empty to disable IPv4 mapped IPv6 addr # communication. (like ::ffff:a.b.c.d) ############################################################## ### System console options ################################# ############################################################## keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # bell to duration.pitch or normal or visual (or NO). keychange="NO" # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). blanktime="300" # blank time (in seconds) or "NO" to turn it off. saver="NO" # screen saver: Uses /modules/${saver}_saver.ko moused_enable="NO" # Run the mouse daemon. moused_type="auto" # See man page for rc.conf(5) for available settings. moused_port="/dev/psm0" # Set to your mouse port. moused_flags="" # Any additional flags to moused. allscreens_flags="" # Set this vidcontrol mode for all virtual screens ############################################################## ### Miscellaneous administrative options ################### ############################################################## cron_enable="YES" # Run the periodic job daemon. lpd_enable="NO" # Run the line printer daemon. lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. lpd_flags="" # Flags to lpd (if enabled). usbd_enable="NO" # Run the usbd daemon. usbd_flags="" # Flags to usbd (if enabled). sendmail_enable="YES" # Run the sendmail daemon (or NO). sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) dumpdev="NO" # Device name to crashdump to (or NO). enable_quotas="NO" # turn on quotas on startup (or NO). check_quotas="YES" # Check quotas on startup (or NO). accounting_enable="NO" # Turn on process accounting (or NO). ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). -rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). clear_tmp_enable="NO" # Clear /tmp at startup. ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" # shared library search paths ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" # a.out shared library search paths kern_securelevel_enable="NO" # kernel security level (see init(8)), kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure update_motd="YES" # update version info in /etc/motd (or NO) start_vinum="" # set to YES to start vinum ############################################################## ### Define source_rc_confs, the mechanism used by /etc/rc.* ## ### scripts to source rc_conf_files overrides safely. ## ############################################################## if [ -z "${source_rc_confs_defined}" ]; then source_rc_confs_defined=yes source_rc_confs ( ) { local i sourced_files for i in ${rc_conf_files}; do case ${sourced_files} in *:$i:*) ;; *) sourced_files="${sourced_files}:$i:" if [ -r $i ]; then . $i fi ;; esac done } fi Index: head/etc/etc.amd64/rc.amd64 =================================================================== --- head/etc/etc.amd64/rc.amd64 (revision 62074) +++ head/etc/etc.amd64/rc.amd64 (revision 62075) @@ -1,225 +1,211 @@ #!/bin/sh - # # $FreeBSD$ # Do i386 specific processing # echo -n 'Initial rc.i386 initialization:' case ${apm_enable} in [Yy][Ee][Ss]) echo -n ' apm' apm -e enable > /dev/null 2>&1 APM_DONE=yes ;; esac case ${apmd_enable} in [Yy][Ee][Ss]) case ${APM_DONE} in '') echo -n ' apm' apm -e enable > /dev/null 2>&1 ;; esac echo -n ' apmd'; apmd ${apmd_flags} ;; esac # Start the SCO binary emulation if requested. # case ${ibcs2_enable} in [Yy][Ee][Ss]) echo -n ' ibcs2'; ibcs2 > /dev/null 2>&1 ;; esac # Start the Linux binary compatibility if requested. # case ${linux_enable} in [Yy][Ee][Ss]) echo -n ' linux'; linux > /dev/null 2>&1 ;; esac # Start the SysVR4 binary emulation if requested. # case ${svr4_enable} in [Yy][Ee][Ss]) echo -n ' svr4'; svr4 > /dev/null 2>&1 ;; esac case ${xtend_enable} in [Yy][Ee][Ss]) echo -n ' xtend'; /usr/libexec/xtend ;; esac echo '.' ########################################################################## ####### Syscons section ######## ########################################################################## # stdin must be redirected because it might be for a serial console # kbddev=/dev/ttyv0 viddev=/dev/ttyv0 echo -n "rc.i386 configuring syscons:" # keymap # case ${keymap} in [Nn][Oo] | '') ;; *) echo -n ' keymap'; kbdcontrol < ${kbddev} -l ${keymap} ;; esac # keyrate # case ${keyrate} in [Nn][Oo] | '') ;; *) echo -n ' keyrate'; kbdcontrol < ${kbddev} -r ${keyrate} ;; esac # keybell # case ${keybell} in [Nn][Oo] | '') ;; *) echo -n ' keybell'; kbdcontrol < ${kbddev} -b ${keybell} ;; esac # change function keys # case ${keychange} in [Nn][Oo] | '') ;; *) echo -n " keychange" set - ${keychange} while [ $# -gt 0 ]; do kbdcontrol <${kbddev} -f "$1" "$2" shift; shift done ;; esac # cursor type # case ${cursor} in [Nn][Oo] | '') ;; *) echo -n ' cursor'; vidcontrol < ${viddev} -c ${cursor} ;; esac # screen mapping # case ${scrnmap} in [Nn][Oo] | '') ;; *) echo -n ' screen_map'; vidcontrol < ${viddev} -l ${scrnmap} ;; esac # font 8x16 # case ${font8x16} in [Nn][Oo] | '') ;; *) echo -n ' font8x16'; vidcontrol < ${viddev} -f 8x16 ${font8x16} ;; esac # font 8x14 # case ${font8x14} in [Nn][Oo] | '') ;; *) echo -n ' font8x14'; vidcontrol < ${viddev} -f 8x14 ${font8x14} ;; esac # font 8x8 # case ${font8x8} in [Nn][Oo] | '') ;; *) echo -n ' font8x8'; vidcontrol < ${viddev} -f 8x8 ${font8x8} ;; esac # blank time # case ${blanktime} in [Nn][Oo] | '') ;; *) echo -n ' blank_time'; vidcontrol < ${viddev} -t ${blanktime} ;; esac # screen saver # case ${saver} in [Nn][Oo] | '') ;; *) echo -n ' screensaver' for i in `kldstat | awk '$5 ~ "^splash_.*$" { print $5 }'`; do kldunload ${i} done kldstat -v | grep -q _saver || kldload ${saver}_saver ;; esac # mouse daemon # case ${moused_enable} in [Yy][Ee][Ss]) echo -n ' moused' moused ${moused_flags} -p ${moused_port} -t ${moused_type} vidcontrol < ${viddev} -m on ;; esac # set this mode for all virtual screens # if [ -n "${allscreens_flags}" ]; then echo -n ' allscreens' for ttyv in /dev/ttyv*; do vidcontrol ${allscreens_flags} < ${ttyv} > ${ttyv} 2>&1 done fi echo '.' - -# interrupts for /dev/random device -# -case ${rand_irqs} in -[Nn][Oo] | '') - ;; -*) - echo -n 'entropy IRQs:' - for irq in ${rand_irqs}; do - echo -n " ${irq}" && rndcontrol -q -s ${irq} - done - echo '.' - ;; -esac Index: head/etc/etc.i386/rc.i386 =================================================================== --- head/etc/etc.i386/rc.i386 (revision 62074) +++ head/etc/etc.i386/rc.i386 (revision 62075) @@ -1,225 +1,211 @@ #!/bin/sh - # # $FreeBSD$ # Do i386 specific processing # echo -n 'Initial rc.i386 initialization:' case ${apm_enable} in [Yy][Ee][Ss]) echo -n ' apm' apm -e enable > /dev/null 2>&1 APM_DONE=yes ;; esac case ${apmd_enable} in [Yy][Ee][Ss]) case ${APM_DONE} in '') echo -n ' apm' apm -e enable > /dev/null 2>&1 ;; esac echo -n ' apmd'; apmd ${apmd_flags} ;; esac # Start the SCO binary emulation if requested. # case ${ibcs2_enable} in [Yy][Ee][Ss]) echo -n ' ibcs2'; ibcs2 > /dev/null 2>&1 ;; esac # Start the Linux binary compatibility if requested. # case ${linux_enable} in [Yy][Ee][Ss]) echo -n ' linux'; linux > /dev/null 2>&1 ;; esac # Start the SysVR4 binary emulation if requested. # case ${svr4_enable} in [Yy][Ee][Ss]) echo -n ' svr4'; svr4 > /dev/null 2>&1 ;; esac case ${xtend_enable} in [Yy][Ee][Ss]) echo -n ' xtend'; /usr/libexec/xtend ;; esac echo '.' ########################################################################## ####### Syscons section ######## ########################################################################## # stdin must be redirected because it might be for a serial console # kbddev=/dev/ttyv0 viddev=/dev/ttyv0 echo -n "rc.i386 configuring syscons:" # keymap # case ${keymap} in [Nn][Oo] | '') ;; *) echo -n ' keymap'; kbdcontrol < ${kbddev} -l ${keymap} ;; esac # keyrate # case ${keyrate} in [Nn][Oo] | '') ;; *) echo -n ' keyrate'; kbdcontrol < ${kbddev} -r ${keyrate} ;; esac # keybell # case ${keybell} in [Nn][Oo] | '') ;; *) echo -n ' keybell'; kbdcontrol < ${kbddev} -b ${keybell} ;; esac # change function keys # case ${keychange} in [Nn][Oo] | '') ;; *) echo -n " keychange" set - ${keychange} while [ $# -gt 0 ]; do kbdcontrol <${kbddev} -f "$1" "$2" shift; shift done ;; esac # cursor type # case ${cursor} in [Nn][Oo] | '') ;; *) echo -n ' cursor'; vidcontrol < ${viddev} -c ${cursor} ;; esac # screen mapping # case ${scrnmap} in [Nn][Oo] | '') ;; *) echo -n ' screen_map'; vidcontrol < ${viddev} -l ${scrnmap} ;; esac # font 8x16 # case ${font8x16} in [Nn][Oo] | '') ;; *) echo -n ' font8x16'; vidcontrol < ${viddev} -f 8x16 ${font8x16} ;; esac # font 8x14 # case ${font8x14} in [Nn][Oo] | '') ;; *) echo -n ' font8x14'; vidcontrol < ${viddev} -f 8x14 ${font8x14} ;; esac # font 8x8 # case ${font8x8} in [Nn][Oo] | '') ;; *) echo -n ' font8x8'; vidcontrol < ${viddev} -f 8x8 ${font8x8} ;; esac # blank time # case ${blanktime} in [Nn][Oo] | '') ;; *) echo -n ' blank_time'; vidcontrol < ${viddev} -t ${blanktime} ;; esac # screen saver # case ${saver} in [Nn][Oo] | '') ;; *) echo -n ' screensaver' for i in `kldstat | awk '$5 ~ "^splash_.*$" { print $5 }'`; do kldunload ${i} done kldstat -v | grep -q _saver || kldload ${saver}_saver ;; esac # mouse daemon # case ${moused_enable} in [Yy][Ee][Ss]) echo -n ' moused' moused ${moused_flags} -p ${moused_port} -t ${moused_type} vidcontrol < ${viddev} -m on ;; esac # set this mode for all virtual screens # if [ -n "${allscreens_flags}" ]; then echo -n ' allscreens' for ttyv in /dev/ttyv*; do vidcontrol ${allscreens_flags} < ${ttyv} > ${ttyv} 2>&1 done fi echo '.' - -# interrupts for /dev/random device -# -case ${rand_irqs} in -[Nn][Oo] | '') - ;; -*) - echo -n 'entropy IRQs:' - for irq in ${rand_irqs}; do - echo -n " ${irq}" && rndcontrol -q -s ${irq} - done - echo '.' - ;; -esac