Index: head/bin/df/df.1 =================================================================== --- head/bin/df/df.1 (revision 366444) +++ head/bin/df/df.1 (revision 366445) @@ -1,244 +1,284 @@ .\"- .\" Copyright (c) 1989, 1990, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)df.1 8.3 (Berkeley) 5/8/95 .\" $FreeBSD$ .\" -.Dd August 8, 2017 +.Dd October 5, 2020 .Dt DF 1 .Os .Sh NAME .Nm df .Nd display free disk space .Sh SYNOPSIS .Nm .Op Fl -libxo .Op Fl b | g | H | h | k | m | P .Op Fl acilnT .Op Fl \&, .Op Fl t Ar type .Op Ar file | filesystem ... .Sh DESCRIPTION The .Nm utility displays statistics about the amount of free disk space on the specified .Ar file system or on the file system of which .Ar file is a part. By default block counts are displayed with an assumed block size of 512 bytes. If neither a file or a file system operand is specified, statistics for all mounted file systems are displayed (subject to the .Fl t option below). .Pp The following options are available: .Bl -tag -width indent .It Fl -libxo Generate output via .Xr libxo 3 in a selection of different human and machine readable formats. See .Xr xo_parse_args 3 for details on command line arguments. .It Fl a Show all mount points, including those that were mounted with the .Dv MNT_IGNORE flag. This is implied for file systems specified on the command line. .It Fl b Explicitly use 512 byte blocks, overriding any .Ev BLOCKSIZE specification from the environment. This is the same as the .Fl P option. The .Fl k option overrides this option. .It Fl c Display a grand total. .It Fl g Use 1073741824 byte (1 Gibibyte) blocks rather than the default. This overrides any .Ev BLOCKSIZE specification from the environment. .It Fl h .Dq Human-readable output. Use unit suffixes: Byte, Kibibyte, Mebibyte, Gibibyte, Tebibyte and Pebibyte (based on powers of 1024) in order to reduce the number of digits to four or fewer. .It Fl H , Fl Fl si -.Dq Human-readable -output. -Use unit suffixes: Byte, Kilobyte, Megabyte, -Gigabyte, Terabyte and Petabyte (based on powers of 1000) in order to -reduce the number of -digits to four or fewer. +Same as +.Fl h +but based on powers of 1000. .It Fl i Include statistics on the number of free and used inodes. In conjunction with the .Fl h or .Fl H options, the number of inodes is scaled by powers of 1000. .It Fl k Use 1024 byte (1 Kibibyte) blocks rather than the default. This overrides the .Fl P option and any .Ev BLOCKSIZE specification from the environment. .It Fl l Only display information about locally-mounted file systems. .It Fl m Use 1048576 byte (1 Mebibyte) blocks rather than the default. This overrides any .Ev BLOCKSIZE specification from the environment. .It Fl n Print out the previously obtained statistics from the file systems. This option should be used if it is possible that one or more file systems are in a state such that they will not be able to provide statistics without a long delay. When this option is specified, .Nm will not request new statistics from the file systems, but will respond with the possibly stale statistics that were previously obtained. .It Fl P Explicitly use 512 byte blocks, overriding any .Ev BLOCKSIZE specification from the environment. This is the same as the .Fl b option. The .Fl k option overrides this option. .It Fl t Only print out statistics for file systems of the specified types. More than one type may be specified in a comma separated list. The list of file system types can be prefixed with .Dq no to specify the file system types for which action should .Em not be taken. For example, the .Nm command: .Bd -literal -offset indent df -t nonfs,nullfs .Ed .Pp -lists all file systems except those of type -.Tn NFS -and -.Tn NULLFS . +lists all file systems except those of type NFS and NULLFS. The .Xr lsvfs 1 command can be used to find out the types of file systems that are available on the system. .It Fl T Include file system type. .It Fl , (Comma) Print sizes grouped and separated by thousands using the non-monetary separator returned by .Xr localeconv 3 , typically a comma or period. If no locale is set, or the locale does not have a non-monetary separator, this option has no effect. .El .Sh ENVIRONMENT .Bl -tag -width BLOCKSIZE .It Ev BLOCKSIZE Specifies the units in which to report block counts. This uses .Xr getbsize 3 , which allows units of bytes or numbers scaled with the letters .Em k (for multiples of 1024 bytes), .Em m (for multiples of 1048576 bytes) or .Em g (for gibibytes). The allowed range is 512 bytes to 1 GB. If the value is outside, it will be set to the appropriate limit. .El +.Sh EXAMPLES +Show human readable free disk space for all mount points including file system +type: +.Bd -literal -offset indent +$ df -ahT +Filesystem Type Size Used Avail Capacity Mounted on +/dev/ada1p2 ufs 213G 152G 44G 78% / +devfs devfs 1.0K 1.0K 0B 100% /dev +/dev/ada0p1 ufs 1.8T 168G 1.5T 10% /data +linsysfs linsysfs 4.0K 4.0K 0B 100% /compat/linux/sys +/dev/da0 msdosfs 7.6G 424M 7.2G 5% /mnt/usb +.Ed +.Pp +Show previously collected data including inode statistics except for devfs or +linsysfs file systems. +Note that the +.Dq no +prefix affects all the file systems in the list and the +.Fl t +option can be specified only once: +.Bd -literal -offset indent +$ df -i -n -t nodevfs,linsysfs +Filesystem 1K-blocks Used Avail Capacity iused ifree %iused +Mounted on +/dev/ada1p2 223235736 159618992 45757888 78% 1657590 27234568 6% / +/dev/ada0p1 1892163184 176319420 1564470712 10% 1319710 243300576 1% +/data +/dev/da0 7989888 433664 7556224 5% 0 0 100% +/mnt/usb +.Ed +.Pp +Show human readable information for the file system containing the file +.Pa /etc/rc.conf +: +.Bd -literal -offset indent +$ df -h /etc/rc.conf +Filesystem Size Used Avail Capacity Mounted on +/dev/ada1p2 213G 152G 44G 78% / +.Ed +.Pp +Same as above but specifying some file system: +.Bd -literal -offset indent +$ df -h /dev/ada1p2 +Filesystem Size Used Avail Capacity Mounted on +/dev/ada1p2 213G 152G 44G 78% / +.Ed .Sh SEE ALSO .Xr lsvfs 1 , .Xr quota 1 , .Xr fstatfs 2 , .Xr getfsstat 2 , .Xr statfs 2 , .Xr getbsize 3 , .Xr getmntinfo 3 , .Xr libxo 3 , .Xr localeconv 3 , .Xr xo_parse_args 3 , .Xr fstab 5 , .Xr mount 8 , .Xr pstat 8 , .Xr quot 8 , .Xr swapinfo 8 .Sh STANDARDS With the exception of most options, the .Nm utility conforms to .St -p1003.1-2004 , which defines only the .Fl k , P and .Fl t options. .Sh HISTORY A .Nm command appeared in .At v1 . .Sh BUGS The .Fl n flag is ignored if a file or file system is specified. Also, if a mount point is not accessible by the user, it is possible that the file system information could be stale. .Pp The .Fl b and .Fl P options are identical. The former comes from the BSD tradition, and the latter is required for .St -p1003.1-2004 conformity.