Index: releng/12.2/usr.sbin/bsdconfig/share/media/ftp.subr =================================================================== --- releng/12.2/usr.sbin/bsdconfig/share/media/ftp.subr (revision 366262) +++ releng/12.2/usr.sbin/bsdconfig/share/media/ftp.subr (revision 366263) @@ -1,910 +1,897 @@ if [ ! "$_MEDIA_FTP_SUBR" ]; then _MEDIA_FTP_SUBR=1 # # Copyright (c) 2012-2013 Devin Teske # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ # ############################################################ INCLUDES BSDCFG_SHARE="/usr/share/bsdconfig" . $BSDCFG_SHARE/common.subr || exit 1 f_dprintf "%s: loading includes..." media/ftp.subr f_include $BSDCFG_SHARE/device.subr f_include $BSDCFG_SHARE/dialog.subr f_include $BSDCFG_SHARE/media/common.subr f_include $BSDCFG_SHARE/media/tcpip.subr f_include $BSDCFG_SHARE/strings.subr f_include $BSDCFG_SHARE/struct.subr f_include $BSDCFG_SHARE/variable.subr BSDCFG_LIBE="/usr/libexec/bsdconfig" f_include_lang $BSDCFG_LIBE/include/messages.subr ############################################################ GLOBALS FTP_SKIP_RESOLV= URL_MAX=261261 # according to actual fetch(1) test-results FTP_DIRS=" . releases/$UNAME_P snapshots/$UNAME_P pub/FreeBSD pub/FreeBSD/releases/$UNAME_P pub/FreeBSD/snapshots/$UNAME_P pub/FreeBSD-Archive/old-releases/$UNAME_P " # END-QUOTE ############################################################ FUNCTIONS # f_dialog_menu_media_ftp # # Prompt the user to select from a range of ``built-in'' FTP servers or specify # their own. If the user makes a choice and doesn't cancel or press Esc, stores # the user's choice in VAR_FTP_PATH (see variables.subr) and returns success. # f_dialog_menu_media_ftp() { f_dialog_title "$msg_please_select_a_freebsd_ftp_distribution_site" local title="$DIALOG_TITLE" btitle="$DIALOG_BACKTITLE" f_dialog_title_restore local prompt="$msg_please_select_the_site_closest_to_you_or_other" local menu_list=" '$msg_main_site' 'ftp.freebsd.org' 'URL' '$msg_specify_some_other_ftp_site' 'IPv6 $msg_main_site' 'ftp.freebsd.org' ' IPv6 $msg_france' 'ftp4.fr.freebsd.org' ' IPv6 $msg_france #8' 'ftp8.fr.freebsd.org' ' IPv6 $msg_ireland' 'ftp3.ie.freebsd.org' ' IPv6 $msg_japan' 'ftp2.jp.freebsd.org' ' IPv6 $msg_sweden' 'ftp4.se.freebsd.org' ' IPv6 $msg_usa' 'ftp4.us.freebsd.org' - ' IPv6 $msg_turkey' 'ftp2.tr.freebsd.org' '$msg_primary' 'ftp1.freebsd.org' ' $msg_primary #2' 'ftp2.freebsd.org' ' $msg_primary #3' 'ftp3.freebsd.org' ' $msg_primary #4' 'ftp4.freebsd.org' ' $msg_primary #5' 'ftp5.freebsd.org' ' $msg_primary #6' 'ftp6.freebsd.org' ' $msg_primary #7' 'ftp7.freebsd.org' ' $msg_primary #10' 'ftp10.freebsd.org' ' $msg_primary #11' 'ftp11.freebsd.org' ' $msg_primary #12' 'ftp12.freebsd.org' ' $msg_primary #13' 'ftp13.freebsd.org' ' $msg_primary #14' 'ftp14.freebsd.org' - '$msg_armenia' 'ftp1.am.freebsd.org' '$msg_australia' 'ftp.au.freebsd.org' ' $msg_australia #2' 'ftp2.au.freebsd.org' ' $msg_australia #3' 'ftp3.au.freebsd.org' '$msg_austria' 'ftp.at.freebsd.org' '$msg_brazil' 'ftp2.br.freebsd.org' ' $msg_brazil #3' 'ftp3.br.freebsd.org' ' $msg_brazil #4' 'ftp4.br.freebsd.org' - '$msg_canada' 'ftp.ca.freebsd.org' '$msg_china' 'ftp.cn.freebsd.org' '$msg_czech_republic' 'ftp.cz.freebsd.org' '$msg_denmark' 'ftp.dk.freebsd.org' - '$msg_estonia' 'ftp.ee.freebsd.org' '$msg_finland' 'ftp.fi.freebsd.org' '$msg_france' 'ftp.fr.freebsd.org' ' $msg_france #3' 'ftp3.fr.freebsd.org' ' $msg_france #4' 'ftp4.fr.freebsd.org' ' $msg_france #5' 'ftp5.fr.freebsd.org' ' $msg_france #6' 'ftp6.fr.freebsd.org' ' $msg_france #7' 'ftp7.fr.freebsd.org' ' $msg_france #8' 'ftp8.fr.freebsd.org' '$msg_germany' 'ftp.de.freebsd.org' ' $msg_germany #2' 'ftp2.de.freebsd.org' ' $msg_germany #4' 'ftp4.de.freebsd.org' ' $msg_germany #5' 'ftp5.de.freebsd.org' - ' $msg_germany #6' 'ftp6.de.freebsd.org' ' $msg_germany #7' 'ftp7.de.freebsd.org' ' $msg_germany #8' 'ftp8.de.freebsd.org' '$msg_greece' 'ftp.gr.freebsd.org' ' $msg_greece #2' 'ftp2.gr.freebsd.org' '$msg_ireland' 'ftp3.ie.freebsd.org' - '$msg_israel' 'ftp.il.freebsd.org' '$msg_japan' 'ftp.jp.freebsd.org' ' $msg_japan #2' 'ftp2.jp.freebsd.org' ' $msg_japan #3' 'ftp3.jp.freebsd.org' ' $msg_japan #4' 'ftp4.jp.freebsd.org' ' $msg_japan #5' 'ftp5.jp.freebsd.org' ' $msg_japan #6' 'ftp6.jp.freebsd.org' ' $msg_japan #7' 'ftp7.jp.freebsd.org' ' $msg_japan #8' 'ftp8.jp.freebsd.org' ' $msg_japan #9' 'ftp9.jp.freebsd.org' '$msg_korea' 'ftp.kr.freebsd.org' ' $msg_korea #2' 'ftp2.kr.freebsd.org' '$msg_latvia' 'ftp.lv.freebsd.org' - '$msg_lithuania' 'ftp.lt.freebsd.org' '$msg_netherlands' 'ftp.nl.freebsd.org' ' $msg_netherlands #2' 'ftp2.nl.freebsd.org' '$msg_new_zealand' 'ftp.nz.freebsd.org' '$msg_norway' 'ftp.no.freebsd.org' '$msg_poland' 'ftp.pl.freebsd.org' - ' $msg_poland #2' 'ftp2.pl.freebsd.org' '$msg_russia' 'ftp.ru.freebsd.org' ' $msg_russia #2' 'ftp2.ru.freebsd.org' - ' $msg_russia #4' 'ftp4.ru.freebsd.org' ' $msg_russia #5' 'ftp5.ru.freebsd.org' ' $msg_russia #6' 'ftp6.ru.freebsd.org' '$msg_slovak_republic' 'ftp.sk.freebsd.org' ' $msg_slovak_republic #2' 'ftp2.sk.freebsd.org' '$msg_slovenia' 'ftp.si.freebsd.org' '$msg_south_africa' 'ftp.za.freebsd.org' ' $msg_south_africa #2' 'ftp2.za.freebsd.org' ' $msg_south_africa #4' 'ftp4.za.freebsd.org' - '$msg_spain' 'ftp.es.freebsd.org' - ' $msg_spain #3' 'ftp3.es.freebsd.org' '$msg_sweden' 'ftp.se.freebsd.org' ' $msg_sweden #2' 'ftp2.se.freebsd.org' - ' $msg_sweden #3' 'ftp3.se.freebsd.org' ' $msg_sweden #4' 'ftp4.se.freebsd.org' - ' $msg_sweden #6' 'ftp6.se.freebsd.org' '$msg_switzerland' 'ftp.ch.freebsd.org' '$msg_taiwan' 'ftp.tw.freebsd.org' ' $msg_taiwan #2' 'ftp2.tw.freebsd.org' ' $msg_taiwan #3' 'ftp3.tw.freebsd.org' ' $msg_taiwan #4' 'ftp4.tw.freebsd.org' ' $msg_taiwan #6' 'ftp6.tw.freebsd.org' ' $msg_taiwan #11' 'ftp11.tw.freebsd.org' '$msg_uk' 'ftp.uk.freebsd.org' ' $msg_uk #2' 'ftp2.uk.freebsd.org' ' $msg_uk #3' 'ftp3.uk.freebsd.org' ' $msg_uk #4' 'ftp4.uk.freebsd.org' ' $msg_uk #5' 'ftp5.uk.freebsd.org' '$msg_ukraine' 'ftp.ua.freebsd.org' ' $msg_ukraine #7' 'ftp7.ua.freebsd.org' '$msg_usa #1' 'ftp1.us.freebsd.org' ' $msg_usa #2' 'ftp2.us.freebsd.org' ' $msg_usa #3' 'ftp3.us.freebsd.org' ' $msg_usa #4' 'ftp4.us.freebsd.org' ' $msg_usa #5' 'ftp5.us.freebsd.org' ' $msg_usa #6' 'ftp6.us.freebsd.org' ' $msg_usa #8' 'ftp8.us.freebsd.org' ' $msg_usa #10' 'ftp10.us.freebsd.org' ' $msg_usa #11' 'ftp11.us.freebsd.org' ' $msg_usa #13' 'ftp13.us.freebsd.org' ' $msg_usa #14' 'ftp14.us.freebsd.org' ' $msg_usa #15' 'ftp15.us.freebsd.org' " # END-QUOTE local hline="$msg_select_a_site_thats_close" local height width rows eval f_dialog_menu_size height width rows \ \"\$title\" \ \"\$btitle\" \ \"\$prompt\" \ \"\$hline\" \ $menu_list local mtag mtag=$( eval $DIALOG \ --title \"\$title\" \ --backtitle \"\$btitle\" \ --hline \"\$hline\" \ --ok-label \"\$msg_ok\" \ --cancel-label \"\$msg_cancel\" \ --menu \"\$prompt\" \ $height $width $rows \ $menu_list \ 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD ) || return $DIALOG_CANCEL f_dialog_data_sanitize mtag case "$mtag" in URL) setvar $VAR_FTP_PATH "other" ;; *) local value value=$( eval f_dialog_menutag2item \"\$mtag\" $menu_list ) setvar $VAR_FTP_PATH "ftp://$value" esac return $DIALOG_OK } # f_media_set_ftp # # Return success if we both found and set the media type to be an FTP server. # Variables from variable.subr that can be used to script user input: # # VAR_FTP_PATH # Can be a URL (including "ftp://" protocol-prefix) or "other" # (user is prompted to enter FTP URL). If a URL, can optionally # contain directory prefix after hostname/port. Valid examples # include: # ftp://myhost # ftp://somename:21/pub/ # ftp://192.168.2.3/pub/ # ftp://[::1]:21/ # The default port if not specified is 21. # VAR_NAMESERVER [Optional] # If set, overrides resolv.conf(5) and sets the nameserver that # is used to convert names into addresses (when a name converts # into multiple addresses, the first address to successfully # connect is used). # # Meanwhile, the following variables from variable.subr are set after # successful execution: # # VAR_FTP_HOST # The FTP host to connect to, parsed from VAR_FTP_PATH. In the # example case of IPv6 where VAR_FTP_PATH is "ftp://[::1]", this # variable will be set to "::1" (the outer brackets are removed). # VAR_FTP_PORT # The TCP port to connect to, parsed from VAR_FTP_PATH. Usually # 21 unless VAR_FTP_PATH was of one of the following forms: # ftp://hostname:OTHER_PORT # ftp://hostname:OTHER_PORT/* # ftp://ip:OTHER_PORT # ftp://ip:OTHER_PORT/* # ftp://[ip6]:OTHER_PORT # ftp://[ip6]:OTHER_PORT/* # VAR_FTP_DIR # If VAR_FTP_PATH contained a directory element (e.g., # "ftp://localhost/pub") this variable contains only the # directory element (e.g., "/pub"). # f_media_set_ftp() { f_media_close local url f_getvar $VAR_FTP_PATH url # If we've been through here before ... if f_struct device_network && [ "${url#$msg_other}" ]; then f_dialog_yesno "$msg_reuse_old_ftp_site_selection_values" || url= fi if [ ! "$url" ]; then f_dialog_menu_media_ftp || return $FAILURE f_getvar $VAR_FTP_PATH url fi [ "$url" ] || return $FAILURE case "$url" in other) setvar $VAR_FTP_PATH "ftp://" f_variable_get_value $VAR_FTP_PATH \ "$msg_please_specify_url_of_a_freebsd_distribution" f_getvar $VAR_FTP_PATH url if [ ! "${url#ftp://}" ]; then unset $VAR_FTP_PATH return $FAILURE fi if [ ${#url} -gt ${URL_MAX:-261261} ]; then f_show_msg "$msg_length_of_specified_url_is_too_long" \ ${#url} ${URL_MAX:-261261} unset $VAR_FTP_PATH return $FAILURE fi case "$url" in ftp://*) : valid URL ;; *) f_show_msg "$msg_sorry_invalid_url" "$url" unset $VAR_FTP_PATH return $FAILURE esac esac case "$url" in ftp://*) : valid URL ;; *) f_show_msg "$msg_sorry_invalid_url" "$url" unset $VAR_FTP_PATH return $FAILURE esac # Set the name of the FTP device to the URL f_struct_new DEVICE device_ftp device_ftp set name "$url" if ! f_struct device_network || ! f_dialog_yesno "$msg_youve_already_done_the_network_configuration" then f_struct device_network && f_device_shutdown device_network if ! f_device_select_tcp; then unset $VAR_FTP_PATH return $FAILURE fi local dev if f_getvar $VAR_NETWORK_DEVICE if f_device_find -1 "$if" $DEVICE_TYPE_NETWORK dev f_struct_copy "$dev" device_network fi if ! f_device_init device_network; then f_dprintf "f_media_set_ftp: %s" "$msg_net_device_init_failed" unset $VAR_FTP_PATH return $FAILURE fi local hostname="${url#*://}" port=21 dir=/ case "$hostname" in # # The order in-which the below individual cases appear is important! # "["*"]":*/*) # IPv6 address with port and directory f_dprintf "Looks like an IPv6 addr with port/dir: %s" \ "$hostname" hostname="${hostname#\[}" port="${hostname#*\]:}" port="${port%%[!0-9]*}" dir="/${hostname#*/}" hostname="${hostname%%\]:*}" ;; "["*"]":*) # IPv6 address with port f_dprintf "Looks like an IPv6 addr with port: %s" "$hostname" hostname="${hostname#\[}" port="${hostname#*\]:}" port="${port%%[!0-9]*}" hostname="${hostname%%\]:*}" ;; "["*"]"/*) # IPv6 address with directory f_dprintf "Looks like an IPv6 addr with dir: %s" "$hostname" hostname="${hostname#\[}" dir="/${hostname#*/}" hostname="${hostname%%\]*}" ;; "["*"]") # IPv6 address f_dprintf "Looks like an IPv6 addr: %s" "$hostname" hostname="${hostname#\[}" hostname="${hostname%\]}" ;; # # ^^^ IPv6 above / DNS Name or IPv4 below vvv # *:*/*) # DNS name or IPv4 address with port and directory f_dprintf "Looks like a %s with port/dir: %s" \ "DNS name or IPv4 addr" "$hostname" port="${hostname#*:}" port="${port%%[!0-9]*}" dir="/${hostname#*/}" hostname="${hostname%%:*}" ;; *:*) # DNS name or IPv4 address with port f_dprintf "Looks like a DNS name or IPv4 addr with port: %s" \ "$hostname" port="${hostname#*:}" hostname="${hostname%%:*}" ;; */*) # DNS name or IPv4 address with directory f_dprintf "Looks like a DNS name or IPv4 addr with dir: %s" \ "$hostname" dir="/${hostname#*/}" hostname="${hostname%%/*}" ;; *) # DNS name or IPv4 address f_dprintf "Looks like a DNS name or IPv4 addr: %s" "$hostname" : leave hostname as-is esac f_dprintf "hostname = \`%s'" "$hostname" f_dprintf "dir = \`%s'" "$dir" f_dprintf "port \# = \`%d'" "$port" local ns f_getvar $VAR_NAMESERVER ns [ "$ns" ] || f_resolv_conf_nameservers ns if [ "$ns" -a ! "$FTP_SKIP_RESOLV" ] && ! { f_validate_ipaddr "$hostname" || f_validate_ipaddr6 "$hostname" }; then f_show_info "$msg_looking_up_host" "$hostname" f_dprintf "%s: Looking up hostname, %s, using host(1)" \ "f_media_set_ftp" "$hostname" if ! f_quietly f_host_lookup "$hostname"; then f_show_msg "$msg_cannot_resolve_hostname" "$hostname" f_struct device_network && f_device_shutdown device_network f_struct_free device_network unset $VAR_FTP_PATH return $FAILURE fi f_dprintf "Found DNS entry for %s successfully." "$hostname" fi setvar $VAR_FTP_HOST "$hostname" setvar $VAR_FTP_PORT "$port" setvar $VAR_FTP_DIR "$dir" device_ftp set type $DEVICE_TYPE_FTP device_ftp set init f_media_init_ftp device_ftp set get f_media_get_ftp device_ftp set shutdown f_media_shutdown_ftp device_ftp set private device_network f_struct_copy device_ftp device_media f_struct_free device_ftp return $SUCCESS } # f_media_set_ftp_active # # Wrapper to f_media_set_ftp to access FTP servers actively. # f_media_set_ftp_active() { setvar $VAR_FTP_STATE "active" f_media_set_ftp } # f_media_set_ftp_passive # # Wrapper to f_media_set_ftp to access FTP servers passively. # f_media_set_ftp_passive() { setvar $VAR_FTP_STATE "passive" f_media_set_ftp } # f_media_set_ftp_userpass # # Prompt the user to enter/confirm the username/password variables that will # be used to communicate with the FTP servers. Returns success if the user does # not cancel or press Esc to either username or password. # # Variables from variable.subr that can be used to script user input: # # VAR_FTP_USER # The username to send via ftp(1) when connecting to an FTP # server. # VAR_FTP_PASS # The password to send with the above username. # # Does not prompt for confirmation of values if VAR_NONINTERACTIVE is set (see # variable.subr for more information). # f_media_set_ftp_userpass() { local user pass f_variable_get_value $VAR_FTP_USER \ "$msg_please_enter_the_username_you_wish_to_login_as" f_getvar $VAR_FTP_USER user if [ "$user" ]; then f_variable_get_value $VAR_FTP_PASS \ "$msg_please_enter_the_password_for_this_user" f_getvar $VAR_FTP_PASS pass else pass= fi [ "$pass" ] # Return status } # f_device_network_up $device # # Brings up attached network device, if any - takes FTP device as arg. # f_device_network_up() { local dev="$1" netDev f_struct "$dev" || return $FAILURE $dev get private netDev || return $SUCCESS # No net == happy net debug=1 f_dprintf "netDev=[$netDev]" f_device_init $netDev } # f_device_network_down $device # # Brings down attached network device, if any - takes FTP device as arg. # f_device_network_down() { local dev="$1" netDev f_struct "$dev" || return $FAILURE $dev get private netDev || return $SUCCESS f_device_shutdown $netDev } # f_media_init_ftp $device # # Initializes the FTP media device. Returns success if both able to log into # the FTP server and confirm the existence of at least one known release path # using ftp(1). # # Variables from variable.subr used to initialize the connection are as follows # (all of which are configured by f_media_set_ftp above): # # VAR_FTP_PATH # The unparsed FTP URL representing the server to contact. # Usually "ftp://server" for example. Can contain TCP port number # and/or directory path (but should not contain username/password # info). # VAR_FTP_HOST # The FTP host to connect to. Can be an IPv4 address (e.g., # 127.0.0.1), IPv6 address (e.g., ::1), or DNS hostname. Usually # set automatically in f_media_set_ftp() by parsing VAR_FTP_PATH. # VAR_FTP_PORT # The TCP port to connect to. Usually set automatically in # f_media_set_ftp() by parsing VAR_FTP_PATH. # VAR_FTP_DIR # The base FTP directory to use when downloading files from the # FTP server. Usually set automatically in f_media_set_ftp() by # parsing VAR_FTP_PATH. # VAR_FTP_USER [Optional] # If unset, defaults to using anonymous access. # VAR_FTP_PASS [Optional] # If unset, defaults to a sensible value. # # In addition, the following (managed either manually or by f_media_set_ftp_*): # # VAR_FTP_STATE # Sets FTPMODE for ftp(1) and can be one of: # active active mode FTP only # auto automatic determination of passive or active # (this is the default) # gate gate-ftp mode # passive passive mode FTP only # See ftp(1) for additional information. # # And last, but not least (managed automatically or manually): # # VAR_RELNAME # Defaults to being set to $(uname -r) but can be overridden. # This sets the name of a release to look for as part of a well # known set of paths to search for release data once connected # via FTP. If set to "__RELEASE" or "any" then the VAR_FTP_DIR is # taken as the absolute path to the release and no further # searching is done (see FTP_DIRS above in the GLOBALS section # for a list of well known paths that are used when searching for # a VAR_RELNAME sub-directory). # f_media_init_ftp() { local dev="$1" local url $dev get name url f_dprintf "Init routine called for FTP device. url=[%s]" "$url" if [ "$FTP_INITIALIZED" ]; then f_dprintf "FTP device already initialized." return $SUCCESS fi # If we can't initialize the network, bag it! f_device_network_up $dev || return $FAILURE local cp while :; do f_getvar $VAR_FTP_PATH cp if [ ! "$cp" ]; then if ! f_media_set_ftp || ! f_getvar $VAR_FTP_PATH cp || [ ! "$cp" ] then f_show_msg "$msg_unable_to_get_proper_ftp_path" f_device_network_down $dev return $FAILURE fi fi local ftp_host ftp_dir if ! { f_getvar $VAR_FTP_HOST ftp_host && f_getvar $VAR_FTP_DIR ftp_dir }; then f_show_msg "$msg_missing_ftp_host_or_directory" f_device_network_down $dev return $FAILURE fi local ftp_port f_getvar $VAR_FTP_PORT ftp_port local host="$ftp_host" port="${ftp_port:+:$ftp_port}" case "$host" in *:*) host="[$host]"; esac local user pass use_anon= f_getvar $VAR_FTP_USER user if [ ! "$user" ]; then user="anonymous" use_anon=1 fi if ! f_getvar $VAR_FTP_PASS pass; then f_getvar $VAR_HOSTNAME cp if f_running_as_init; then pass="installer@$cp" else local name="$( id -un 2> /dev/null )" pass="${name:-ftp}@$cp" fi fi f_show_info "$msg_logging_in_to_user_at_host" \ "$user" "$ftp_host" local userpass="" if [ ! "$use_anon" ] && [ "$user" -o "$pass" ]; then userpass="$user${pass:+:$( f_uriencode "$pass" )}" userpass="$userpass${userpass:+@}" fi local mode rx f_getvar $VAR_FTP_STATE mode if [ "$ftp_dir" ]; then if ! rx=$( printf 'cd "%s"\npwd\n' "$ftp_dir" | eval \ FTPMODE=\"\$mode\" \ ${use_anon:+FTPANONPASS=\"\$pass\"} \ ftp -V ${use_anon:+-a} \ \"ftp://\$userpass\$host\$port\" \ 2>&1 ); then f_show_msg "$msg_couldnt_open_ftp_connection" \ "$ftp_host" "$rx" break # to failure fi if echo "$rx" | awk -v dir="/${ftp_dir#/}" ' BEGIN { found = 0 if ( dir != "/" ) sub("/$", "", dir) } /^Remote directory: / { sub(/^[^:]*:[[:space:]]*/, "") if ($0 != dir) next found = 1; exit } END { exit ! found } '; then setvar $VAR_FTP_DIR "$ftp_dir" setvar $VAR_FTP_PATH \ "ftp://$ftp_host/${ftp_dir#/}" else f_show_msg \ "$msg_please_check_the_url_and_try_again" \ "ftp://$ftp_host/${ftp_dir#/}" break # to failure fi fi # # Now that we've verified that the path we're given is ok, # let's try to be a bit intelligent in locating the release we # are looking for. First off, if the release is specified as # "__RELEASE" or "any", then just assume that the current # directory is the one we want and give up. # local rel f_getvar $VAR_RELNAME rel f_dprintf "f_media_init_ftp: rel=[%s]" "$rel" case "$rel" in __RELEASE|any) FTP_INITIALIZED=YES return $SUCCESS ;; *) # # Ok, since we have a release variable, let's walk # through the list of directories looking for a release # directory. First successful CWD wins. # if ! rx=$( for dir in $FTP_DIRS; do # Avoid confusing some servers [ "$dir" = "." ] && continue printf 'cd "/%s/%s"\npwd\n' \ "$dir" "$rel" done | eval \ FTPMODE=\"\$mode\" \ ${use_anon:+FTPANONPASS=\"\$pass\"} \ ftp -V ${use_anon:+-a} \ \"ftp://\$userpass\$host\$port\" \ 2>&1 ); then f_show_msg "$msg_couldnt_open_ftp_connection" \ "$ftp_host" "$rx" break # to failure fi local fdir if fdir=$( echo "$rx" | awk ' /^Remote directory: / { sub(/^[^:]*:[[:space:]]*/, "") if ($0 == "/") next # Exit after the first dir found++; print; exit } END { exit ! found } ' ); then setvar $VAR_FTP_DIR "$fdir" setvar $VAR_FTP_PATH "ftp://$ftp_host$fdir" FTP_INITIALIZED=YES return $SUCCESS else f_yesno "$msg_cant_find_distribution" \ "$rel" "$ftp_host" if [ $? -eq $DIALOG_OK ]; then unset $VAR_FTP_PATH f_media_set_ftp && continue fi fi esac break # to failure done unset FTP_INITIALIZED $VAR_FTP_PATH f_device_network_down $dev return $FAILURE } # f_media_get_ftp $device $file [$probe_type] # # Returns data from $file on an FTP server using ftp(1). Please note that # $device is unused but must be present (even if null). Information is instead # gathered from the environment. If $probe_type is present and non-NULL, # returns success if $file exists. If $probe_type is equal to $PROBE_SIZE, # prints the size of $file in bytes to standard-out. # # Variables from variable.subr used to configure the connection are as follows # (all of which are configured by f_media_set_ftp above): # # VAR_FTP_HOST # FTP host to connect to. Can be an IPv4 address, IPv6 address, # or DNS hostname of your choice. # VAR_FTP_PORT # TCP port to connect on; see f_media_set_ftp() above. # VAR_FTP_USER [Optional] # If unset, defaults to using anonymous access. # VAR_FTP_PASS [Optional] # If unset, defaults to a sensible value. # # In addition, the following (managed either manually or by f_media_set_ftp_*): # # VAR_FTP_STATE # Sets FTPMODE for ftp(1) and can be one of: # active active mode FTP only # auto automatic determination of passive or active # (this is the default) # gate gate-ftp mode # passive passive mode FTP only # See ftp(1) for additional information. # # See variable.subr for additional information. # # Example usage: # f_media_set_ftp # f_media_get_ftp media $file # f_media_get_ftp() { local funcname=f_media_get_ftp local dev="$1" file="$2" probe_type="$3" hosts= f_dprintf "f_media_get_ftp: dev=[%s] file=[%s] probe_type=%s" \ "$dev" "$file" "$probe_type" local ftp_host ftp_port f_getvar $VAR_FTP_HOST ftp_host f_getvar $VAR_FTP_PORT ftp_port if [ ! "$FTP_INITIALIZED" ]; then f_dprintf "No FTP connection open, can't get file %s" "$file" return $FAILURE fi if ! { f_validate_ipaddr "$ftp_host" || f_validate_ipaddr6 "$ftp_host" || { f_dprintf "%s: Looking up hostname, %s, using host(1)" \ "f_media_get_ftp" "$ftp_host" f_host_lookup "$ftp_host" hosts } }; then # All the above validations failed [ "$hosts" ] && f_dialog_msgbox "$hosts" return $FAILURE elif [ ! "$hosts" ]; then # One of the first two validations passed hosts="$ftp_host" fi local host connected= for host in $hosts; do f_quietly nc -nz "$host" "$ftp_port" || continue connected=1; break done if [ ! "$connected" ]; then f_show_msg "$msg_couldnt_connect_to_ftp_server %s:%s" \ "$ftp_host" "$ftp_port" return $FAILURE fi local user pass use_anon= f_getvar $VAR_FTP_USER user if [ ! "$user" ]; then user="anonymous" use_anon=1 fi if ! f_getvar $VAR_FTP_PASS pass; then f_getvar $VAR_HOSTNAME cp if f_running_as_init; then pass="installer@$cp" else local name="$( id -un 2> /dev/null )" pass="${name:-ftp}@$cp" fi fi local userpass="" if [ ! "$use_anon" ] && [ "$user" -o "$pass" ]; then userpass="$user${pass:+:$( f_uriencode "$pass" )}" userpass="$userpass${userpass:+@}" fi local dir mode rx f_getvar $VAR_FTP_DIR\#/ dir f_getvar $VAR_FTP_STATE mode local port="${ftp_port:+:$ftp_port}" case "$host" in *:*) host="[$host]"; esac f_dprintf "sending ftp request for: %s" "ftp://$host$port/$dir/$file" if [ "$probe_type" ]; then local url="ftp://$userpass$host$port/$dir/$file" size [ "$use_anon" ] && url="ftp://$host$port/$dir/$file" if ! f_eval_catch -dk size $funcname fetch \ 'fetch -s "%s"' "$url" || ! f_isinteger "$size" then f_dprintf "size request failed!" [ "$probe_type" = "$PROBE_SIZE" ] && echo "-1" return $FAILURE fi [ "$probe_type" = "$PROBE_SIZE" ] && echo "$size" return $SUCCESS fi eval FTPMODE=\"\$mode\" ${use_anon:+FTPANONPASS=\"\$pass\"} \ ftp -V ${use_anon:+-a} -o - \ \"ftp://\$userpass\$host\$port/\$dir/\$file\" 2> /dev/null local retval=$? [ $retval -eq $SUCCESS ] || f_dprintf "request failed!" return $retval } # f_media_shutdown_ftp $device # # Shuts down the FTP device. Return status should be ignored. Note that since # we don't maintain an open connection to the FTP server there's nothing to do. # f_media_shutdown_ftp() { [ "$FTP_INITIALIZED" ] || return $SUCCESS unset FTP_INITIALIZED } ############################################################ MAIN f_dprintf "%s: Successfully loaded." media/ftp.subr fi # ! $_MEDIA_FTP_SUBR Index: releng/12.2/usr.sbin/bsdinstall/scripts/mirrorselect =================================================================== --- releng/12.2/usr.sbin/bsdinstall/scripts/mirrorselect (revision 366262) +++ releng/12.2/usr.sbin/bsdinstall/scripts/mirrorselect (revision 366263) @@ -1,192 +1,178 @@ #!/bin/sh #- # Copyright (c) 2011 Nathan Whitehorn # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ : ${DIALOG_OK=0} : ${DIALOG_CANCEL=1} : ${DIALOG_HELP=2} : ${DIALOG_EXTRA=3} : ${DIALOG_ITEM_HELP=4} : ${DIALOG_ESC=255} exec 3>&1 MIRROR=`dialog --backtitle "FreeBSD Installer" \ --title "Mirror Selection" --extra-button --extra-label "Other" \ --menu "Please select the site closest to you or \"other\" if you'd like to specify a different choice. Also note that not every site listed here carries more than the base distribution kits. Only Primary sites are guaranteed to carry the full range of possible distributions. Select a site that's close!" \ 0 0 0 \ ftp://ftp.freebsd.org "Main Site"\ ftp://ftp.freebsd.org "IPv6 Main Site"\ ftp://ftp3.ie.freebsd.org "IPv6 Ireland"\ ftp://ftp2.jp.freebsd.org "IPv6 Japan"\ ftp://ftp4.se.freebsd.org "IPv6 Sweden"\ ftp://ftp4.us.freebsd.org "IPv6 USA"\ - ftp://ftp2.tr.freebsd.org "IPv6 Turkey"\ ftp://ftp1.freebsd.org "Primary"\ ftp://ftp2.freebsd.org "Primary #2"\ ftp://ftp3.freebsd.org "Primary #3"\ ftp://ftp4.freebsd.org "Primary #4"\ ftp://ftp5.freebsd.org "Primary #5"\ ftp://ftp6.freebsd.org "Primary #6"\ ftp://ftp7.freebsd.org "Primary #7"\ ftp://ftp10.freebsd.org "Primary #10"\ ftp://ftp11.freebsd.org "Primary #11"\ ftp://ftp12.freebsd.org "Primary #12"\ ftp://ftp13.freebsd.org "Primary #13"\ ftp://ftp14.freebsd.org "Primary #14"\ - ftp://ftp1.am.freebsd.org "Armenia"\ ftp://ftp.au.freebsd.org "Australia"\ ftp://ftp2.au.freebsd.org "Australia #2"\ ftp://ftp3.au.freebsd.org "Australia #3"\ ftp://ftp.at.freebsd.org "Austria"\ ftp://ftp2.br.freebsd.org "Brazil #2"\ ftp://ftp3.br.freebsd.org "Brazil #3"\ ftp://ftp4.br.freebsd.org "Brazil #4"\ - ftp://ftp.ca.freebsd.org "Canada"\ ftp://ftp.cn.freebsd.org "China"\ ftp://ftp.cz.freebsd.org "Czech Republic"\ ftp://ftp.dk.freebsd.org "Denmark"\ - ftp://ftp.ee.freebsd.org "Estonia"\ ftp://ftp.fi.freebsd.org "Finland"\ ftp://ftp.fr.freebsd.org "France"\ ftp://ftp3.fr.freebsd.org "France #3"\ ftp://ftp4.fr.freebsd.org "IPv6 France #4"\ ftp://ftp5.fr.freebsd.org "France #5"\ ftp://ftp6.fr.freebsd.org "France #6"\ ftp://ftp7.fr.freebsd.org "France #7"\ ftp://ftp8.fr.freebsd.org "IPv6 France #8"\ ftp://ftp.de.freebsd.org "Germany"\ ftp://ftp2.de.freebsd.org "Germany #2"\ ftp://ftp4.de.freebsd.org "Germany #4"\ ftp://ftp5.de.freebsd.org "Germany #5"\ - ftp://ftp6.de.freebsd.org "Germany #6"\ ftp://ftp7.de.freebsd.org "Germany #7"\ ftp://ftp8.de.freebsd.org "Germany #8"\ ftp://ftp.gr.freebsd.org "Greece"\ ftp://ftp2.gr.freebsd.org "Greece #2"\ ftp://ftp3.ie.freebsd.org "Ireland #3"\ - ftp://ftp.il.freebsd.org "Israel"\ ftp://ftp.jp.freebsd.org "Japan"\ ftp://ftp2.jp.freebsd.org "Japan #2"\ ftp://ftp3.jp.freebsd.org "Japan #3"\ ftp://ftp4.jp.freebsd.org "Japan #4"\ ftp://ftp5.jp.freebsd.org "Japan #5"\ ftp://ftp6.jp.freebsd.org "Japan #6"\ ftp://ftp7.jp.freebsd.org "Japan #7"\ ftp://ftp8.jp.freebsd.org "Japan #8"\ ftp://ftp9.jp.freebsd.org "Japan #9"\ ftp://ftp.kr.freebsd.org "Korea"\ ftp://ftp2.kr.freebsd.org "Korea #2"\ ftp://ftp.lv.freebsd.org "Latvia"\ - ftp://ftp.lt.freebsd.org "Lithuania"\ ftp://ftp.nl.freebsd.org "Netherlands"\ ftp://ftp2.nl.freebsd.org "Netherlands #2"\ ftp://ftp.nz.freebsd.org "New Zealand"\ ftp://ftp.no.freebsd.org "Norway"\ ftp://ftp.pl.freebsd.org "Poland"\ - ftp://ftp2.pl.freebsd.org "Poland #2"\ ftp://ftp.ru.freebsd.org "Russia"\ ftp://ftp2.ru.freebsd.org "Russia #2"\ - ftp://ftp4.ru.freebsd.org "Russia #4"\ ftp://ftp5.ru.freebsd.org "Russia #5"\ ftp://ftp6.ru.freebsd.org "Russia #6"\ ftp://ftp.sk.freebsd.org "Slovak Republic"\ ftp://ftp2.sk.freebsd.org "Slovak Republic #2"\ ftp://ftp.si.freebsd.org "Slovenia"\ ftp://ftp.za.freebsd.org "South Africa"\ ftp://ftp2.za.freebsd.org "South Africa #2"\ ftp://ftp4.za.freebsd.org "South Africa #4"\ - ftp://ftp.es.freebsd.org "Spain"\ - ftp://ftp3.es.freebsd.org "Spain #3"\ ftp://ftp.se.freebsd.org "Sweden"\ - ftp://ftp2.se.freebsd.org "Sweden #2"\ - ftp://ftp3.se.freebsd.org "Sweden #3"\ ftp://ftp4.se.freebsd.org "Sweden #4"\ - ftp://ftp6.se.freebsd.org "Sweden #6"\ ftp://ftp.ch.freebsd.org "Switzerland"\ ftp://ftp.tw.freebsd.org "Taiwan"\ ftp://ftp2.tw.freebsd.org "Taiwan #2"\ ftp://ftp3.tw.freebsd.org "Taiwan #3"\ ftp://ftp4.tw.freebsd.org "Taiwan #4"\ ftp://ftp6.tw.freebsd.org "Taiwan #6"\ ftp://ftp11.tw.freebsd.org "Taiwan #11"\ ftp://ftp.uk.freebsd.org "UK"\ ftp://ftp2.uk.freebsd.org "UK #2"\ ftp://ftp3.uk.freebsd.org "UK #3"\ ftp://ftp4.uk.freebsd.org "UK #4"\ ftp://ftp5.uk.freebsd.org "UK #5"\ ftp://ftp.ua.freebsd.org "Ukraine"\ ftp://ftp7.ua.freebsd.org "Ukraine #7"\ ftp://ftp1.us.freebsd.org "USA #1"\ ftp://ftp2.us.freebsd.org "USA #2"\ ftp://ftp3.us.freebsd.org "USA #3"\ ftp://ftp4.us.freebsd.org "USA #4"\ ftp://ftp5.us.freebsd.org "USA #5"\ ftp://ftp6.us.freebsd.org "USA #6"\ ftp://ftp8.us.freebsd.org "USA #8"\ ftp://ftp10.us.freebsd.org "USA #10"\ ftp://ftp11.us.freebsd.org "USA #11"\ ftp://ftp13.us.freebsd.org "USA #13"\ ftp://ftp14.us.freebsd.org "USA #14"\ ftp://ftp15.us.freebsd.org "USA #15"\ 2>&1 1>&3` MIRROR_BUTTON=$? exec 3>&- _UNAME_R=`uname -r` _UNAME_R=${_UNAME_R%-p*} case ${_UNAME_R} in *-ALPHA*|*-CURRENT|*-STABLE|*-PRERELEASE) RELDIR="snapshots" ;; *) RELDIR="releases" ;; esac BSDINSTALL_DISTSITE="$MIRROR/pub/FreeBSD/${RELDIR}/`uname -m`/`uname -p`/${_UNAME_R}" case $MIRROR_BUTTON in $DIALOG_CANCEL) exit 1 ;; $DIALOG_OK) ;; $DIALOG_EXTRA) exec 3>&1 BSDINSTALL_DISTSITE=`dialog --backtitle "FreeBSD Installer" \ --title "Mirror Selection" \ --inputbox "Please enter the URL to an alternate FreeBSD mirror:" \ 0 0 "$BSDINSTALL_DISTSITE" 2>&1 1>&3` MIRROR_BUTTON=$? exec 3>&- test $MIRROR_BUTTON -eq 0 || exec $0 $@ ;; esac export BSDINSTALL_DISTSITE echo $BSDINSTALL_DISTSITE >&2 Index: releng/12.2 =================================================================== --- releng/12.2 (revision 366262) +++ releng/12.2 (revision 366263) Property changes on: releng/12.2 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,2 ## Merged /stable/12:r366258 Merged /head:r366186