Index: head/sbin/devd/devd.conf.5 =================================================================== --- head/sbin/devd/devd.conf.5 (revision 364724) +++ head/sbin/devd/devd.conf.5 (revision 364725) @@ -1,730 +1,734 @@ .\" .\" Copyright (c) 2002 M. Warner Losh .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .\" The section on comments was taken from named.conf.5, which has the .\" following copyright: .\" Copyright (c) 1999-2000 by Internet Software Consortium .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS .\" ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE .\" CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL .\" DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR .\" PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS .\" ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS .\" SOFTWARE. .\" .Dd August 18, 2020 .Dt DEVD.CONF 5 .Os .Sh NAME .Nm devd.conf .Nd configuration file for .Xr devd 8 .Sh DESCRIPTION .Ss General Syntax A .Xr devd 8 configuration consists of two general features, statements and comments. All statements end with a semicolon. Many statements can contain substatements, which are also terminated with a semicolon. .Pp The following statements are supported: .Bl -tag -width ".Ic options" .It Ic attach Specifies various matching criteria and actions to perform when a newly attached device matches said criteria. .It Ic detach Specifies various matching criteria and actions to perform when a newly detached device matches said criteria. .It Ic nomatch Specifies various matching criteria and actions to perform when no device driver currently loaded in the kernel claims a (new) device. .It Ic notify Specifies various matching criteria and actions to perform when the kernel sends an event notification to userland. .It Ic options Specifies various options and parameters for the operation of .Xr devd 8 . .El .Pp Statements may occur in any order in the configuration file, and may be repeated as often as required. Further details on the syntax and meaning of each statement and their substatements are explained below. .Pp Each statement, except .Ic options has a priority (an arbitrary number) associated with it, where .Ql 0 is defined as the lowest priority. If two statements match the same event, only the action of the statement with highest priority will be executed. In this way generic statements can be overridden for devices or notifications that require special attention. .Pp The general syntax of a statement is: .Bd -literal -offset indent statement priority { substatement "value"; ... substatement "value"; }; .Ed .Ss Sub-statements The following sub-statements are supported within the .Ic options statement. .Bl -tag -width ".Ic directory" .It Ic directory Qq Ar /some/path ; Adds the given directory to the list of directories from which .Xr devd 8 will read all files named "*.conf" as further configuration files. Any number of .Ic directory statements can be used. .It Ic pid-file Qq Pa /var/run/devd.pid ; Specifies PID file. .It Ic set Ar regexp-name Qq Ar (some|regexp) ; Creates a regular expression and assigns it to the variable .Ar regexp-name . The variable is available throughout the rest of the configuration file. If the string begins with .Ql \&! , it matches if the regular expression formed by the rest of the string does not match. All regular expressions have an implicit .Ql ^$ around them. .El .Pp The following sub-statements are supported within the .Ic attach and .Ic detach statements. .Bl -tag -width ".Ic directory" .It Ic action Qq Ar command ; Command to execute upon a successful match. Example .Dq Li "/etc/pccard_ether $device-name start" . .It Ic class Qq Ar string ; This is shorthand for .Dq Ic match Qo Li class Qc Qq Ar string . .It Ic device-name Qq string ; This is shorthand for .Dq Ic match Qo Li device-name Qc Qq Ar string . This matches a device named .Ar string , which is allowed to be a regular expression or a variable previously created containing a regular expression. The .Dq Li device-name variable is available for later use with the .Ic action statement. .It Ic match Qo Ar variable Qc Qq Ar value ; Matches the content of .Ar value against .Ar variable ; the content of .Ar value may be a regular expression. Not required during .Ic attach nor .Ic detach events since the .Ic device-name statement takes care of all device matching. For a partial list of variables, see below. .It Ic media-type Qq Ar string ; For network devices, .Ic media-type will match devices that have the given media type. Valid media types are: .Dq Li Ethernet , .Dq Li Tokenring , .Dq Li FDDI , .Dq Li 802.11 , and .Dq Li ATM . .It Ic subdevice Qq Ar string ; This is shorthand for .Dq Ic match Qo Li subdevice Qc Qq Ar string . .El .Pp The following sub-statements are supported within the .Ic nomatch statement. .Bl -tag -width ".Ic directory" .It Ic action Qq Ar command ; Same as above. .It Ic match Qo Ar variable Qc Qq Ar value ; Matches the content of .Ar value against .Ar variable ; the content of .Ar value may be a regular expression. For a partial list of variables, see below. .El .Pp The following sub-statements are supported within the .Ic notify statement. The .Dq Li notify variable is available inside this statement and contains, a value, depending on which system and subsystem that delivered the event. .Bl -tag -width ".Ic directory" .It Ic action Qq Ar command ; Command to execute upon a successful match. Example .Dq Li "/etc/rc.d/power_profile $notify" . .It Ic match Qo Ar system | subsystem | type | notify Qc Qq Ar value ; Any number of .Ic match statements can exist within a .Ic notify statement; .Ar value can be either a fixed string or a regular expression. Below is a list of available systems, subsystems, and types. .It Ic media-type Qq Ar string ; See above. .El .Ss Variables that can be used with the match statement A partial list of variables and their possible values that can be used together with the .Ic match statement. The variables are published by the bus based on characteristics of the device that generated the event (for device events). Variables for other classes of events are dependent on those events. .Pp .Bl -tag -width ".Li manufacturer" -compact .It Ic Variable .Ic Description .It Li * The entire message from the current event. .It Li _ The entire message from the current event, after the initial type character. .It Li timestamp The time this event was processed, in seconds since 1970 dot fraction. .It Li bus Device name of parent bus. .It Li cdev Device node path if one is created by the .Xr devfs 5 filesystem. .It Li class Device class. .It Li comm Executable name (kernel). .It Li core Path to core file (kernel). .It Li device Device ID. .It Li devclass Device Class (USB). .It Li devsubclass Device Sub-class (USB). .It Li device-name Name of attached/detached device. .It Li endpoints Endpoint count (USB). .It Li function Card functions. .It Li interface Interface ID (USB). .It Li intclass Interface Class (USB). .It Li intprotocol Interface Protocol (USB). .It Li intsubclass Interface Sub-class (USB). .It Li jail Jail name for the process triggering the rule (RCTL). .It Li mode Peripheral mode (USB). .It Li notify Match the value of the .Dq Li notify variable. .It Li parent Parent device. .It Li pid PID of the process triggering the rule (RCTL). .It Li port Hub port number (USB). .It Li product Product ID (USB). .It Li release Hardware revision (USB). .It Li ruid Real UID of the process triggering the rule (RCTL). .It Li rule Rule (RCTL). .It Li sernum Serial Number (USB). .It Li slot Card slot. .It Li subvendor Sub-vendor ID (PCI). .It Li subdevice Sub-device ID (PCI). .It Li subsystem Matches a subsystem of a system, see below. .It Li system Matches a system type, see below. .It Li type Type of notification, see below. .It Li vendor Vendor ID. .El .Ss Notify matching A partial list of systems, subsystems, and types used within the .Ic notify mechanism. .\" .\" Please keep these tables sorted. Also, please use the same parameters .\" for each of the tables so that things line up in columns nicely. .\" Please do not omit the type column for notifiers that omit it. .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li ACPI Ta Ta Ta Events related to the ACPI Subsystem. .It Li ACPI Ta Li ACAD Ta Ta AC line state ($notify=0x00 is offline, 0x01 is online). .It Li ACPI Ta Li Button Ta Ta Button state ($notify=0x00 is power, 0x01 is sleep). .It Li ACPI Ta Li CMBAT Ta Ta Battery events. .It Li ACPI Ta Li Dock Ta Ta Dock state ($notify=0x00 is undocked, 0x01 is docked). .It Li ACPI Ta Li Lid Ta Ta Lid state ($notify=0x00 is closed, 0x01 is open). .It Li ACPI Ta Li PROCESSOR Ta Ta Processor state/configuration ($notify=0x81 is a change in available Cx states). .It Li ACPI Ta Li Resume Ta Ta Resume notification. .It Li ACPI Ta Li Suspend Ta Ta Suspend notification. .It Li ACPI Ta Li Thermal Ta Ta Thermal zone events. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li AEON Ta Li power Ta Li press Ta The power button on an Amiga has been pressed. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li CAM Ta Ta Ta Events related to the .Xr cam 4 system. .It Li CAM Ta Li periph Ta Ta Events related to peripheral devices. .It Li CAM Ta Li periph Ta Li error Ta Generic errors. .It Li CAM Ta Li periph Ta Li timeout Ta Command timeouts. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li CARP Ta Ta Ta Events related to the .Xr carp 4 protocol. .It CARP Ta Ar vhid@inet Ta Ta The .Dq subsystem contains the actual CARP vhid and the name of the network interface on which the event took place. .It CARP Ta Ar vhid@inet Ta MASTER Ta Node become the master for a virtual host. .It CARP Ta Ar vhid@inet Ta BACKUP Ta Node become the backup for a virtual host. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li coretemp Ta Ta Ta Events related to the .Xr coretemp 4 device. .It Li coretemp Ta Li Thermal Ta Ta Notification that the CPU core has reached critical temperature. .It Li coretemp Ta Li Thermal Ta Li temperature Ta String containing the temperature of the core that has become too hot. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li IFNET .It Li IFNET Ta Ar inet Ta Ta The .Dq subsystem is the actual name of the network interface on which the event took place. .It Li IFNET Ta Ar inet Ta Li LINK_UP Ta Carrier status changed to UP. .It Li IFNET Ta Ar inet Ta Li LINK_DOWN Ta Carrier status changed to DOWN. .It Li IFNET Ta Ar inet Ta Li ATTACH Ta The network interface is attached to the system. .It Li IFNET Ta Ar inet Ta Li DETACH Ta The network interface is detached from the system. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li DEVFS .It Li DEVFS Ta Li CDEV Ta Li CREATE Ta The .Xr devfs 5 node is created. .It Li DEVFS Ta Li CDEV Ta Li DESTROY Ta The .Xr devfs 5 node is destroyed. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li GEOM Ta Ta Ta Events related to the .Xr geom 4 framework. The difference compared to .Li DEVFS is that .Li GEOM only includes disk-like devices. .It Li GEOM Ta Li DEV Ta Li CREATE Ta A .Xr geom 4 provider is created. .It Li GEOM Ta Li DEV Ta Li DESTROY Ta A .Xr geom 4 provider is destroyed. .It Li GEOM Ta Li DEV Ta Li GEOM::physpath Ta The physical path of a device has changed. .It Li GEOM Ta Li DEV Ta Li GEOM::rotation_rate Ta The rotation rate of the disk has changed. .It Li GEOM Ta Li DEV Ta Li MEDIACHANGE Ta Physical media has changed. .It Li GEOM Ta Li DEV Ta Li SIZECHANGE Ta A .Xr geom 4 provider size has changed. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li kern Ta Li power Ta Li resume Ta Notification that the system has woken from the suspended state. +Note: this notification is deprecated and will be removed in +.Fx 14.0 . .El .Pp .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li kernel Ta Li signal Ta Li coredump Ta Notification that a process has crashed and dumped core. +.It Li kernel Ta Li power Ta Li resume Ta +Notification that the system has woken from the suspended state. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li PMU Ta Ta Ta Notification of events from various types of Power Management Units. .It Li PMU Ta Li "AC" Ta Ta Notifications of AC power related events. .It Li PMU Ta Li "AC" Ta Li overvoltage Ta An over-voltage condition was detected on the AC power line. .It Li PMU Ta Li "AC" Ta Li plugged Ta Power has been applied to the AC power line. .It Li PMU Ta Li "AC" Ta Li unplugged Ta Power has been removed from the AC power line. .It Li PMU Ta Li Battery Ta Ta .It Li PMU Ta Li Battery Ta absent Ta Battery is no longer absent. .It Li PMU Ta Li Battery Ta charged Ta The battery has become charged. .It Li PMU Ta Li Battery Ta charging Ta The battery has started charging. .It Li PMU Ta Li Battery Ta disconnected Ta The battery has been disconnected. .It Li PMU Ta Li Battery Ta high-temp Ta The battery reported a temperature over the limit. .It Li PMU Ta Li Battery Ta low-temp Ta The battery reported a temperature under the limit. .It Li PMU Ta Li Battery Ta plugged Ta The battery has become plugged (eg connected). .It Li PMU Ta Li Battery Ta shutdown-threshold Ta The power in the battery has fallen below the shutdown threshold. .It Li PMU Ta Li Battery Ta warning-threshold Ta The power in the battery has fallen below the warn the user threshold. .It Li PMU Ta Li Button Ta pressed Ta A button on a .Xr adb 4 or .Xr pmu 4 has been pressed. .It Li PMU Ta Li keys Ta Ta One of the keys on the .Xr adb 4 keyboard has been pressed. .It Li PMU Ta Li keys Ta brightness Ta A brightness level change has been requested. Direction is in the $notify variable. .It Li PMU Ta Li keys Ta mute Ta The mute key .It Li PMU Ta Li keys Ta volume Ta A volume level change has been requested. Direction is in the $notify variable. .It Li PMU Ta Li keys Ta eject Ta An ejection has been requested. .It Li PMU Ta Li lid Ta close Ta The .Xr pmc 4 device has detected the lid closing. .It Li PMU Ta Li lid Ta open Ta The .Xr pmc 4 device has detected the lid openinging. .It Li PMU Ta Li POWER Ta ACLINE Ta The .Xr pmc 4 device has deteted an AC line state ($notify=0x00 is offline, 0x01 is online). .It Li PMU Ta Li USB Ta overvoltage Ta An over-voltage condition on the power lines for the USB power pins. .It Li PMU Ta Li USB Ta plugged Ta A device has been plugged into a USB device. .It Li PMU Ta Li USB Ta undervoltage Ta An under-voltage condition on the power lines for the USB power pins. .It Li PMU Ta Li USB Ta unplugged Ta A device has been unplugged into a USB device. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li RCTL Ta Ta Ta Events related to the .Xr rctl 8 framework. .It Li RCTL Ta Li rule Ta Li matched Ta A rule with action specified as "devctl" was triggered. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li USB Ta Ta Ta Events related to the USB subsystem. .It Li USB Ta Li DEVICE Ta Li ATTACH Ta USB device is attached to the system. .It Li USB Ta Li DEVICE Ta Li DETACH Ta USB device is detached to the system. .It Li USB Ta Li INTERFACE Ta Li ATTACH Ta USB interface is attached to a device. .It Li USB Ta Li INTERFACE Ta Li DETACH Ta USB interface is detached from a device. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li VFS Ta Ta Ta Events from the vfs system. .It Li VFS Ta Li FS Ta Ta Events that change what is mounted to the system. .It Li VFS Ta Li FS Ta Li MOUNT Ta Notification of a filesystem is mounted for the first time. .It Li VFS Ta Li FS Ta Li REMOUNT Ta Notification of a filesystem is remounted (whether or not the options actually change). .It Li VFS Ta Li FS Ta Li UNMOUNT Ta Notification of a filesystem being unmounted. .El .Pp .Bl -column "System" "Subsystem" "1234567" -compact .Sy "System" Ta Sy "Subsystem" Ta Sy "Type" Ta Sy "Description" .It Li ZFS Ta ZFS Ta Ta Events about the ZFS subsystem. See .Xr zfsd 8 and .Pa /etc/devd/zfs.conf for details. .El .Pp .\" .\" End of tables .\" A link state change to UP on the interface .Dq Li fxp0 would result in the following notify event: .Bd -literal -offset indent system=IFNET subsystem=fxp0 type=LINK_UP .Ed .Pp An AC line state change to .Dq offline would result in the following event: .Bd -literal -offset indent system=ACPI subsystem=ACAD notify=0x00 .Ed .Ss Comments Comments may appear anywhere that whitespace may appear in a configuration file. To appeal to programmers of all kinds, they can be written in C, C++, or shell/Perl constructs. .Pp C-style comments start with the two characters .Ql /* (slash, star) and end with .Ql */ (star, slash). Because they are completely delimited with these characters, they can be used to comment only a portion of a line or to span multiple lines. .Pp C-style comments cannot be nested. For example, the following is not valid because the entire comment ends with the first .Ql */ : .Bd -literal -offset indent /* This is the start of a comment. This is still part of the comment. /* This is an incorrect attempt at nesting a comment. */ This is no longer in any comment. */ .Ed .Pp C++-style comments start with the two characters .Ql // (slash, slash) and continue to the end of the physical line. They cannot be continued across multiple physical lines; to have one logical comment span multiple lines, each line must use the .Ql // pair. For example: .Bd -literal -offset indent // This is the start of a comment. The next line // is a new comment, even though it is logically // part of the previous comment. .Ed .Sh FILES .Bl -tag -width ".Pa /etc/devd.conf" -compact .It Pa /etc/devd.conf The .Xr devd 8 configuration file. .El .Sh EXAMPLES .Bd -literal # # This will catch link down events on the interfaces fxp0 and ath0 # notify 0 { match "system" "IFNET"; match "subsystem" "(fxp0|ath0)"; match "type" "LINK_DOWN"; action "logger $subsystem is DOWN"; }; # # Match lid open/close events # These can be combined to a single event, by passing the # value of $notify to the external script. # notify 0 { match "system" "ACPI"; match "subsystem" "Lid"; match "notify" "0x00"; action "logger Lid closed, we can sleep now!"; }; notify 0 { match "system" "ACPI"; match "subsystem" "Lid"; match "notify" "0x01"; action "logger Lid opened, the sleeper must awaken!"; }; # # Match a USB device type # notify 0 { match "system" "USB"; match "subsystem" "INTERFACE"; match "type" "ATTACH"; match "intclass" "0x0e"; action "logger USB video device attached"; }; # # Try to configure ath and iwn devices with pccard_ether # as they are attached. # attach 0 { device-name "(ath|iwn)[0-9]+"; action "/etc/pccard_ether $device-name start"; }; # # Stop ath and iwn devices as they are detached from # the system. # detach 0 { device-name "(ath|iwn)[0-9]+"; action "/etc/pccard_ether $device-name stop"; }; .Ed .Pp The installed .Pa /etc/devd.conf has many additional examples. .Sh SEE ALSO .Xr cam 4 , .Xr coretemp 4 , .Xr devfs 5 , .Xr re_format 7 , .Xr devd 8 Index: head/sys/kern/subr_bus.c =================================================================== --- head/sys/kern/subr_bus.c (revision 364724) +++ head/sys/kern/subr_bus.c (revision 364725) @@ -1,5954 +1,5956 @@ /*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 1997,1998,2003 Doug Rabson * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_bus.h" #include "opt_ddb.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include SYSCTL_NODE(_hw, OID_AUTO, bus, CTLFLAG_RW | CTLFLAG_MPSAFE, NULL, NULL); SYSCTL_ROOT_NODE(OID_AUTO, dev, CTLFLAG_RW | CTLFLAG_MPSAFE, NULL, NULL); /* * Used to attach drivers to devclasses. */ typedef struct driverlink *driverlink_t; struct driverlink { kobj_class_t driver; TAILQ_ENTRY(driverlink) link; /* list of drivers in devclass */ int pass; int flags; #define DL_DEFERRED_PROBE 1 /* Probe deferred on this */ TAILQ_ENTRY(driverlink) passlink; }; /* * Forward declarations */ typedef TAILQ_HEAD(devclass_list, devclass) devclass_list_t; typedef TAILQ_HEAD(driver_list, driverlink) driver_list_t; typedef TAILQ_HEAD(device_list, device) device_list_t; struct devclass { TAILQ_ENTRY(devclass) link; devclass_t parent; /* parent in devclass hierarchy */ driver_list_t drivers; /* bus devclasses store drivers for bus */ char *name; device_t *devices; /* array of devices indexed by unit */ int maxunit; /* size of devices array */ int flags; #define DC_HAS_CHILDREN 1 struct sysctl_ctx_list sysctl_ctx; struct sysctl_oid *sysctl_tree; }; /** * @brief Implementation of device. */ struct device { /* * A device is a kernel object. The first field must be the * current ops table for the object. */ KOBJ_FIELDS; /* * Device hierarchy. */ TAILQ_ENTRY(device) link; /**< list of devices in parent */ TAILQ_ENTRY(device) devlink; /**< global device list membership */ device_t parent; /**< parent of this device */ device_list_t children; /**< list of child devices */ /* * Details of this device. */ driver_t *driver; /**< current driver */ devclass_t devclass; /**< current device class */ int unit; /**< current unit number */ char* nameunit; /**< name+unit e.g. foodev0 */ char* desc; /**< driver specific description */ int busy; /**< count of calls to device_busy() */ device_state_t state; /**< current device state */ uint32_t devflags; /**< api level flags for device_get_flags() */ u_int flags; /**< internal device flags */ u_int order; /**< order from device_add_child_ordered() */ void *ivars; /**< instance variables */ void *softc; /**< current driver's variables */ struct sysctl_ctx_list sysctl_ctx; /**< state for sysctl variables */ struct sysctl_oid *sysctl_tree; /**< state for sysctl variables */ }; static MALLOC_DEFINE(M_BUS, "bus", "Bus data structures"); static MALLOC_DEFINE(M_BUS_SC, "bus-sc", "Bus data structures, softc"); EVENTHANDLER_LIST_DEFINE(device_attach); EVENTHANDLER_LIST_DEFINE(device_detach); EVENTHANDLER_LIST_DEFINE(dev_lookup); static void devctl2_init(void); static bool device_frozen; #define DRIVERNAME(d) ((d)? d->name : "no driver") #define DEVCLANAME(d) ((d)? d->name : "no devclass") #ifdef BUS_DEBUG static int bus_debug = 1; SYSCTL_INT(_debug, OID_AUTO, bus_debug, CTLFLAG_RWTUN, &bus_debug, 0, "Bus debug level"); #define PDEBUG(a) if (bus_debug) {printf("%s:%d: ", __func__, __LINE__), printf a; printf("\n");} #define DEVICENAME(d) ((d)? device_get_name(d): "no device") /** * Produce the indenting, indent*2 spaces plus a '.' ahead of that to * prevent syslog from deleting initial spaces */ #define indentprintf(p) do { int iJ; printf("."); for (iJ=0; iJparent ? dc->parent->name : ""; break; default: return (EINVAL); } return (SYSCTL_OUT_STR(req, value)); } static void devclass_sysctl_init(devclass_t dc) { if (dc->sysctl_tree != NULL) return; sysctl_ctx_init(&dc->sysctl_ctx); dc->sysctl_tree = SYSCTL_ADD_NODE(&dc->sysctl_ctx, SYSCTL_STATIC_CHILDREN(_dev), OID_AUTO, dc->name, CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, ""); SYSCTL_ADD_PROC(&dc->sysctl_ctx, SYSCTL_CHILDREN(dc->sysctl_tree), OID_AUTO, "%parent", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, dc, DEVCLASS_SYSCTL_PARENT, devclass_sysctl_handler, "A", "parent class"); } enum { DEVICE_SYSCTL_DESC, DEVICE_SYSCTL_DRIVER, DEVICE_SYSCTL_LOCATION, DEVICE_SYSCTL_PNPINFO, DEVICE_SYSCTL_PARENT, }; static int device_sysctl_handler(SYSCTL_HANDLER_ARGS) { device_t dev = (device_t)arg1; const char *value; char *buf; int error; buf = NULL; switch (arg2) { case DEVICE_SYSCTL_DESC: value = dev->desc ? dev->desc : ""; break; case DEVICE_SYSCTL_DRIVER: value = dev->driver ? dev->driver->name : ""; break; case DEVICE_SYSCTL_LOCATION: value = buf = malloc(1024, M_BUS, M_WAITOK | M_ZERO); bus_child_location_str(dev, buf, 1024); break; case DEVICE_SYSCTL_PNPINFO: value = buf = malloc(1024, M_BUS, M_WAITOK | M_ZERO); bus_child_pnpinfo_str(dev, buf, 1024); break; case DEVICE_SYSCTL_PARENT: value = dev->parent ? dev->parent->nameunit : ""; break; default: return (EINVAL); } error = SYSCTL_OUT_STR(req, value); if (buf != NULL) free(buf, M_BUS); return (error); } static void device_sysctl_init(device_t dev) { devclass_t dc = dev->devclass; int domain; if (dev->sysctl_tree != NULL) return; devclass_sysctl_init(dc); sysctl_ctx_init(&dev->sysctl_ctx); dev->sysctl_tree = SYSCTL_ADD_NODE_WITH_LABEL(&dev->sysctl_ctx, SYSCTL_CHILDREN(dc->sysctl_tree), OID_AUTO, dev->nameunit + strlen(dc->name), CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "", "device_index"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%desc", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, dev, DEVICE_SYSCTL_DESC, device_sysctl_handler, "A", "device description"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%driver", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, dev, DEVICE_SYSCTL_DRIVER, device_sysctl_handler, "A", "device driver name"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%location", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, dev, DEVICE_SYSCTL_LOCATION, device_sysctl_handler, "A", "device location relative to parent"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%pnpinfo", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, dev, DEVICE_SYSCTL_PNPINFO, device_sysctl_handler, "A", "device identification"); SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%parent", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, dev, DEVICE_SYSCTL_PARENT, device_sysctl_handler, "A", "parent device"); if (bus_get_domain(dev, &domain) == 0) SYSCTL_ADD_INT(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree), OID_AUTO, "%domain", CTLFLAG_RD, NULL, domain, "NUMA domain"); } static void device_sysctl_update(device_t dev) { devclass_t dc = dev->devclass; if (dev->sysctl_tree == NULL) return; sysctl_rename_oid(dev->sysctl_tree, dev->nameunit + strlen(dc->name)); } static void device_sysctl_fini(device_t dev) { if (dev->sysctl_tree == NULL) return; sysctl_ctx_free(&dev->sysctl_ctx); dev->sysctl_tree = NULL; } /* * /dev/devctl implementation */ /* * This design allows only one reader for /dev/devctl. This is not desirable * in the long run, but will get a lot of hair out of this implementation. * Maybe we should make this device a clonable device. * * Also note: we specifically do not attach a device to the device_t tree * to avoid potential chicken and egg problems. One could argue that all * of this belongs to the root node. */ #define DEVCTL_DEFAULT_QUEUE_LEN 1000 static int sysctl_devctl_queue(SYSCTL_HANDLER_ARGS); static int devctl_queue_length = DEVCTL_DEFAULT_QUEUE_LEN; SYSCTL_PROC(_hw_bus, OID_AUTO, devctl_queue, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_MPSAFE, NULL, 0, sysctl_devctl_queue, "I", "devctl queue length"); static d_open_t devopen; static d_close_t devclose; static d_read_t devread; static d_ioctl_t devioctl; static d_poll_t devpoll; static d_kqfilter_t devkqfilter; static struct cdevsw dev_cdevsw = { .d_version = D_VERSION, .d_open = devopen, .d_close = devclose, .d_read = devread, .d_ioctl = devioctl, .d_poll = devpoll, .d_kqfilter = devkqfilter, .d_name = "devctl", }; struct dev_event_info { char *dei_data; STAILQ_ENTRY(dev_event_info) dei_link; }; STAILQ_HEAD(devq, dev_event_info); static struct dev_softc { int inuse; int nonblock; int queued; int async; struct mtx mtx; struct cv cv; struct selinfo sel; struct devq devq; struct sigio *sigio; } devsoftc; static void filt_devctl_detach(struct knote *kn); static int filt_devctl_read(struct knote *kn, long hint); struct filterops devctl_rfiltops = { .f_isfd = 1, .f_detach = filt_devctl_detach, .f_event = filt_devctl_read, }; static struct cdev *devctl_dev; static void devinit(void) { devctl_dev = make_dev_credf(MAKEDEV_ETERNAL, &dev_cdevsw, 0, NULL, UID_ROOT, GID_WHEEL, 0600, "devctl"); mtx_init(&devsoftc.mtx, "dev mtx", "devd", MTX_DEF); cv_init(&devsoftc.cv, "dev cv"); STAILQ_INIT(&devsoftc.devq); knlist_init_mtx(&devsoftc.sel.si_note, &devsoftc.mtx); devctl2_init(); } static int devopen(struct cdev *dev, int oflags, int devtype, struct thread *td) { mtx_lock(&devsoftc.mtx); if (devsoftc.inuse) { mtx_unlock(&devsoftc.mtx); return (EBUSY); } /* move to init */ devsoftc.inuse = 1; mtx_unlock(&devsoftc.mtx); return (0); } static int devclose(struct cdev *dev, int fflag, int devtype, struct thread *td) { mtx_lock(&devsoftc.mtx); devsoftc.inuse = 0; devsoftc.nonblock = 0; devsoftc.async = 0; cv_broadcast(&devsoftc.cv); funsetown(&devsoftc.sigio); mtx_unlock(&devsoftc.mtx); return (0); } /* * The read channel for this device is used to report changes to * userland in realtime. We are required to free the data as well as * the n1 object because we allocate them separately. Also note that * we return one record at a time. If you try to read this device a * character at a time, you will lose the rest of the data. Listening * programs are expected to cope. */ static int devread(struct cdev *dev, struct uio *uio, int ioflag) { struct dev_event_info *n1; int rv; mtx_lock(&devsoftc.mtx); while (STAILQ_EMPTY(&devsoftc.devq)) { if (devsoftc.nonblock) { mtx_unlock(&devsoftc.mtx); return (EAGAIN); } rv = cv_wait_sig(&devsoftc.cv, &devsoftc.mtx); if (rv) { /* * Need to translate ERESTART to EINTR here? -- jake */ mtx_unlock(&devsoftc.mtx); return (rv); } } n1 = STAILQ_FIRST(&devsoftc.devq); STAILQ_REMOVE_HEAD(&devsoftc.devq, dei_link); devsoftc.queued--; mtx_unlock(&devsoftc.mtx); rv = uiomove(n1->dei_data, strlen(n1->dei_data), uio); free(n1->dei_data, M_BUS); free(n1, M_BUS); return (rv); } static int devioctl(struct cdev *dev, u_long cmd, caddr_t data, int fflag, struct thread *td) { switch (cmd) { case FIONBIO: if (*(int*)data) devsoftc.nonblock = 1; else devsoftc.nonblock = 0; return (0); case FIOASYNC: if (*(int*)data) devsoftc.async = 1; else devsoftc.async = 0; return (0); case FIOSETOWN: return fsetown(*(int *)data, &devsoftc.sigio); case FIOGETOWN: *(int *)data = fgetown(&devsoftc.sigio); return (0); /* (un)Support for other fcntl() calls. */ case FIOCLEX: case FIONCLEX: case FIONREAD: default: break; } return (ENOTTY); } static int devpoll(struct cdev *dev, int events, struct thread *td) { int revents = 0; mtx_lock(&devsoftc.mtx); if (events & (POLLIN | POLLRDNORM)) { if (!STAILQ_EMPTY(&devsoftc.devq)) revents = events & (POLLIN | POLLRDNORM); else selrecord(td, &devsoftc.sel); } mtx_unlock(&devsoftc.mtx); return (revents); } static int devkqfilter(struct cdev *dev, struct knote *kn) { int error; if (kn->kn_filter == EVFILT_READ) { kn->kn_fop = &devctl_rfiltops; knlist_add(&devsoftc.sel.si_note, kn, 0); error = 0; } else error = EINVAL; return (error); } static void filt_devctl_detach(struct knote *kn) { knlist_remove(&devsoftc.sel.si_note, kn, 0); } static int filt_devctl_read(struct knote *kn, long hint) { kn->kn_data = devsoftc.queued; return (kn->kn_data != 0); } /** * @brief Return whether the userland process is running */ boolean_t devctl_process_running(void) { return (devsoftc.inuse == 1); } /** * @brief Queue data to be read from the devctl device * * Generic interface to queue data to the devctl device. It is * assumed that @p data is properly formatted. It is further assumed * that @p data is allocated using the M_BUS malloc type. */ static void devctl_queue_data_f(char *data, int flags) { struct dev_event_info *n1 = NULL, *n2 = NULL; if (strlen(data) == 0) goto out; if (devctl_queue_length == 0) goto out; n1 = malloc(sizeof(*n1), M_BUS, flags); if (n1 == NULL) goto out; n1->dei_data = data; mtx_lock(&devsoftc.mtx); if (devctl_queue_length == 0) { mtx_unlock(&devsoftc.mtx); free(n1->dei_data, M_BUS); free(n1, M_BUS); return; } /* Leave at least one spot in the queue... */ while (devsoftc.queued > devctl_queue_length - 1) { n2 = STAILQ_FIRST(&devsoftc.devq); STAILQ_REMOVE_HEAD(&devsoftc.devq, dei_link); free(n2->dei_data, M_BUS); free(n2, M_BUS); devsoftc.queued--; } STAILQ_INSERT_TAIL(&devsoftc.devq, n1, dei_link); devsoftc.queued++; cv_broadcast(&devsoftc.cv); KNOTE_LOCKED(&devsoftc.sel.si_note, 0); mtx_unlock(&devsoftc.mtx); selwakeup(&devsoftc.sel); if (devsoftc.async && devsoftc.sigio != NULL) pgsigio(&devsoftc.sigio, SIGIO, 0); return; out: /* * We have to free data on all error paths since the caller * assumes it will be free'd when this item is dequeued. */ free(data, M_BUS); return; } static void devctl_queue_data(char *data) { devctl_queue_data_f(data, M_NOWAIT); } /** * @brief Send a 'notification' to userland, using standard ways */ void devctl_notify_f(const char *system, const char *subsystem, const char *type, const char *data, int flags) { int len = 0; char *msg; if (system == NULL) return; /* BOGUS! Must specify system. */ if (subsystem == NULL) return; /* BOGUS! Must specify subsystem. */ if (type == NULL) return; /* BOGUS! Must specify type. */ len += strlen(" system=") + strlen(system); len += strlen(" subsystem=") + strlen(subsystem); len += strlen(" type=") + strlen(type); /* add in the data message plus newline. */ if (data != NULL) len += strlen(data); len += 3; /* '!', '\n', and NUL */ msg = malloc(len, M_BUS, flags); if (msg == NULL) return; /* Drop it on the floor */ if (data != NULL) snprintf(msg, len, "!system=%s subsystem=%s type=%s %s\n", system, subsystem, type, data); else snprintf(msg, len, "!system=%s subsystem=%s type=%s\n", system, subsystem, type); devctl_queue_data_f(msg, flags); } void devctl_notify(const char *system, const char *subsystem, const char *type, const char *data) { devctl_notify_f(system, subsystem, type, data, M_NOWAIT); } /* * Common routine that tries to make sending messages as easy as possible. * We allocate memory for the data, copy strings into that, but do not * free it unless there's an error. The dequeue part of the driver should * free the data. We don't send data when the device is disabled. We do * send data, even when we have no listeners, because we wish to avoid * races relating to startup and restart of listening applications. * * devaddq is designed to string together the type of event, with the * object of that event, plus the plug and play info and location info * for that event. This is likely most useful for devices, but less * useful for other consumers of this interface. Those should use * the devctl_queue_data() interface instead. */ static void devaddq(const char *type, const char *what, device_t dev) { char *data = NULL; char *loc = NULL; char *pnp = NULL; const char *parstr; if (!devctl_queue_length)/* Rare race, but lost races safely discard */ return; data = malloc(1024, M_BUS, M_NOWAIT); if (data == NULL) goto bad; /* get the bus specific location of this device */ loc = malloc(1024, M_BUS, M_NOWAIT); if (loc == NULL) goto bad; *loc = '\0'; bus_child_location_str(dev, loc, 1024); /* Get the bus specific pnp info of this device */ pnp = malloc(1024, M_BUS, M_NOWAIT); if (pnp == NULL) goto bad; *pnp = '\0'; bus_child_pnpinfo_str(dev, pnp, 1024); /* Get the parent of this device, or / if high enough in the tree. */ if (device_get_parent(dev) == NULL) parstr = "."; /* Or '/' ? */ else parstr = device_get_nameunit(device_get_parent(dev)); /* String it all together. */ snprintf(data, 1024, "%s%s at %s %s on %s\n", type, what, loc, pnp, parstr); free(loc, M_BUS); free(pnp, M_BUS); devctl_queue_data(data); return; bad: free(pnp, M_BUS); free(loc, M_BUS); free(data, M_BUS); return; } /* * A device was added to the tree. We are called just after it successfully * attaches (that is, probe and attach success for this device). No call * is made if a device is merely parented into the tree. See devnomatch * if probe fails. If attach fails, no notification is sent (but maybe * we should have a different message for this). */ static void devadded(device_t dev) { devaddq("+", device_get_nameunit(dev), dev); } /* * A device was removed from the tree. We are called just before this * happens. */ static void devremoved(device_t dev) { devaddq("-", device_get_nameunit(dev), dev); } /* * Called when there's no match for this device. This is only called * the first time that no match happens, so we don't keep getting this * message. Should that prove to be undesirable, we can change it. * This is called when all drivers that can attach to a given bus * decline to accept this device. Other errors may not be detected. */ static void devnomatch(device_t dev) { devaddq("?", "", dev); } static int sysctl_devctl_queue(SYSCTL_HANDLER_ARGS) { struct dev_event_info *n1; int q, error; q = devctl_queue_length; error = sysctl_handle_int(oidp, &q, 0, req); if (error || !req->newptr) return (error); if (q < 0) return (EINVAL); if (mtx_initialized(&devsoftc.mtx)) mtx_lock(&devsoftc.mtx); devctl_queue_length = q; while (devsoftc.queued > devctl_queue_length) { n1 = STAILQ_FIRST(&devsoftc.devq); STAILQ_REMOVE_HEAD(&devsoftc.devq, dei_link); free(n1->dei_data, M_BUS); free(n1, M_BUS); devsoftc.queued--; } if (mtx_initialized(&devsoftc.mtx)) mtx_unlock(&devsoftc.mtx); return (0); } /** * @brief safely quotes strings that might have double quotes in them. * * The devctl protocol relies on quoted strings having matching quotes. * This routine quotes any internal quotes so the resulting string * is safe to pass to snprintf to construct, for example pnp info strings. * * @param sb sbuf to place the characters into * @param src Original buffer. */ void devctl_safe_quote_sb(struct sbuf *sb, const char *src) { while (*src != '\0') { if (*src == '"' || *src == '\\') sbuf_putc(sb, '\\'); sbuf_putc(sb, *src++); } } /* End of /dev/devctl code */ static TAILQ_HEAD(,device) bus_data_devices; static int bus_data_generation = 1; static kobj_method_t null_methods[] = { KOBJMETHOD_END }; DEFINE_CLASS(null, null_methods, 0); /* * Bus pass implementation */ static driver_list_t passes = TAILQ_HEAD_INITIALIZER(passes); int bus_current_pass = BUS_PASS_ROOT; /** * @internal * @brief Register the pass level of a new driver attachment * * Register a new driver attachment's pass level. If no driver * attachment with the same pass level has been added, then @p new * will be added to the global passes list. * * @param new the new driver attachment */ static void driver_register_pass(struct driverlink *new) { struct driverlink *dl; /* We only consider pass numbers during boot. */ if (bus_current_pass == BUS_PASS_DEFAULT) return; /* * Walk the passes list. If we already know about this pass * then there is nothing to do. If we don't, then insert this * driver link into the list. */ TAILQ_FOREACH(dl, &passes, passlink) { if (dl->pass < new->pass) continue; if (dl->pass == new->pass) return; TAILQ_INSERT_BEFORE(dl, new, passlink); return; } TAILQ_INSERT_TAIL(&passes, new, passlink); } /** * @brief Raise the current bus pass * * Raise the current bus pass level to @p pass. Call the BUS_NEW_PASS() * method on the root bus to kick off a new device tree scan for each * new pass level that has at least one driver. */ void bus_set_pass(int pass) { struct driverlink *dl; if (bus_current_pass > pass) panic("Attempt to lower bus pass level"); TAILQ_FOREACH(dl, &passes, passlink) { /* Skip pass values below the current pass level. */ if (dl->pass <= bus_current_pass) continue; /* * Bail once we hit a driver with a pass level that is * too high. */ if (dl->pass > pass) break; /* * Raise the pass level to the next level and rescan * the tree. */ bus_current_pass = dl->pass; BUS_NEW_PASS(root_bus); } /* * If there isn't a driver registered for the requested pass, * then bus_current_pass might still be less than 'pass'. Set * it to 'pass' in that case. */ if (bus_current_pass < pass) bus_current_pass = pass; KASSERT(bus_current_pass == pass, ("Failed to update bus pass level")); } /* * Devclass implementation */ static devclass_list_t devclasses = TAILQ_HEAD_INITIALIZER(devclasses); /** * @internal * @brief Find or create a device class * * If a device class with the name @p classname exists, return it, * otherwise if @p create is non-zero create and return a new device * class. * * If @p parentname is non-NULL, the parent of the devclass is set to * the devclass of that name. * * @param classname the devclass name to find or create * @param parentname the parent devclass name or @c NULL * @param create non-zero to create a devclass */ static devclass_t devclass_find_internal(const char *classname, const char *parentname, int create) { devclass_t dc; PDEBUG(("looking for %s", classname)); if (!classname) return (NULL); TAILQ_FOREACH(dc, &devclasses, link) { if (!strcmp(dc->name, classname)) break; } if (create && !dc) { PDEBUG(("creating %s", classname)); dc = malloc(sizeof(struct devclass) + strlen(classname) + 1, M_BUS, M_NOWAIT | M_ZERO); if (!dc) return (NULL); dc->parent = NULL; dc->name = (char*) (dc + 1); strcpy(dc->name, classname); TAILQ_INIT(&dc->drivers); TAILQ_INSERT_TAIL(&devclasses, dc, link); bus_data_generation_update(); } /* * If a parent class is specified, then set that as our parent so * that this devclass will support drivers for the parent class as * well. If the parent class has the same name don't do this though * as it creates a cycle that can trigger an infinite loop in * device_probe_child() if a device exists for which there is no * suitable driver. */ if (parentname && dc && !dc->parent && strcmp(classname, parentname) != 0) { dc->parent = devclass_find_internal(parentname, NULL, TRUE); dc->parent->flags |= DC_HAS_CHILDREN; } return (dc); } /** * @brief Create a device class * * If a device class with the name @p classname exists, return it, * otherwise create and return a new device class. * * @param classname the devclass name to find or create */ devclass_t devclass_create(const char *classname) { return (devclass_find_internal(classname, NULL, TRUE)); } /** * @brief Find a device class * * If a device class with the name @p classname exists, return it, * otherwise return @c NULL. * * @param classname the devclass name to find */ devclass_t devclass_find(const char *classname) { return (devclass_find_internal(classname, NULL, FALSE)); } /** * @brief Register that a device driver has been added to a devclass * * Register that a device driver has been added to a devclass. This * is called by devclass_add_driver to accomplish the recursive * notification of all the children classes of dc, as well as dc. * Each layer will have BUS_DRIVER_ADDED() called for all instances of * the devclass. * * We do a full search here of the devclass list at each iteration * level to save storing children-lists in the devclass structure. If * we ever move beyond a few dozen devices doing this, we may need to * reevaluate... * * @param dc the devclass to edit * @param driver the driver that was just added */ static void devclass_driver_added(devclass_t dc, driver_t *driver) { devclass_t parent; int i; /* * Call BUS_DRIVER_ADDED for any existing buses in this class. */ for (i = 0; i < dc->maxunit; i++) if (dc->devices[i] && device_is_attached(dc->devices[i])) BUS_DRIVER_ADDED(dc->devices[i], driver); /* * Walk through the children classes. Since we only keep a * single parent pointer around, we walk the entire list of * devclasses looking for children. We set the * DC_HAS_CHILDREN flag when a child devclass is created on * the parent, so we only walk the list for those devclasses * that have children. */ if (!(dc->flags & DC_HAS_CHILDREN)) return; parent = dc; TAILQ_FOREACH(dc, &devclasses, link) { if (dc->parent == parent) devclass_driver_added(dc, driver); } } /** * @brief Add a device driver to a device class * * Add a device driver to a devclass. This is normally called * automatically by DRIVER_MODULE(). The BUS_DRIVER_ADDED() method of * all devices in the devclass will be called to allow them to attempt * to re-probe any unmatched children. * * @param dc the devclass to edit * @param driver the driver to register */ int devclass_add_driver(devclass_t dc, driver_t *driver, int pass, devclass_t *dcp) { driverlink_t dl; const char *parentname; PDEBUG(("%s", DRIVERNAME(driver))); /* Don't allow invalid pass values. */ if (pass <= BUS_PASS_ROOT) return (EINVAL); dl = malloc(sizeof *dl, M_BUS, M_NOWAIT|M_ZERO); if (!dl) return (ENOMEM); /* * Compile the driver's methods. Also increase the reference count * so that the class doesn't get freed when the last instance * goes. This means we can safely use static methods and avoids a * double-free in devclass_delete_driver. */ kobj_class_compile((kobj_class_t) driver); /* * If the driver has any base classes, make the * devclass inherit from the devclass of the driver's * first base class. This will allow the system to * search for drivers in both devclasses for children * of a device using this driver. */ if (driver->baseclasses) parentname = driver->baseclasses[0]->name; else parentname = NULL; *dcp = devclass_find_internal(driver->name, parentname, TRUE); dl->driver = driver; TAILQ_INSERT_TAIL(&dc->drivers, dl, link); driver->refs++; /* XXX: kobj_mtx */ dl->pass = pass; driver_register_pass(dl); if (device_frozen) { dl->flags |= DL_DEFERRED_PROBE; } else { devclass_driver_added(dc, driver); } bus_data_generation_update(); return (0); } /** * @brief Register that a device driver has been deleted from a devclass * * Register that a device driver has been removed from a devclass. * This is called by devclass_delete_driver to accomplish the * recursive notification of all the children classes of busclass, as * well as busclass. Each layer will attempt to detach the driver * from any devices that are children of the bus's devclass. The function * will return an error if a device fails to detach. * * We do a full search here of the devclass list at each iteration * level to save storing children-lists in the devclass structure. If * we ever move beyond a few dozen devices doing this, we may need to * reevaluate... * * @param busclass the devclass of the parent bus * @param dc the devclass of the driver being deleted * @param driver the driver being deleted */ static int devclass_driver_deleted(devclass_t busclass, devclass_t dc, driver_t *driver) { devclass_t parent; device_t dev; int error, i; /* * Disassociate from any devices. We iterate through all the * devices in the devclass of the driver and detach any which are * using the driver and which have a parent in the devclass which * we are deleting from. * * Note that since a driver can be in multiple devclasses, we * should not detach devices which are not children of devices in * the affected devclass. * * If we're frozen, we don't generate NOMATCH events. Mark to * generate later. */ for (i = 0; i < dc->maxunit; i++) { if (dc->devices[i]) { dev = dc->devices[i]; if (dev->driver == driver && dev->parent && dev->parent->devclass == busclass) { if ((error = device_detach(dev)) != 0) return (error); if (device_frozen) { dev->flags &= ~DF_DONENOMATCH; dev->flags |= DF_NEEDNOMATCH; } else { BUS_PROBE_NOMATCH(dev->parent, dev); devnomatch(dev); dev->flags |= DF_DONENOMATCH; } } } } /* * Walk through the children classes. Since we only keep a * single parent pointer around, we walk the entire list of * devclasses looking for children. We set the * DC_HAS_CHILDREN flag when a child devclass is created on * the parent, so we only walk the list for those devclasses * that have children. */ if (!(busclass->flags & DC_HAS_CHILDREN)) return (0); parent = busclass; TAILQ_FOREACH(busclass, &devclasses, link) { if (busclass->parent == parent) { error = devclass_driver_deleted(busclass, dc, driver); if (error) return (error); } } return (0); } /** * @brief Delete a device driver from a device class * * Delete a device driver from a devclass. This is normally called * automatically by DRIVER_MODULE(). * * If the driver is currently attached to any devices, * devclass_delete_driver() will first attempt to detach from each * device. If one of the detach calls fails, the driver will not be * deleted. * * @param dc the devclass to edit * @param driver the driver to unregister */ int devclass_delete_driver(devclass_t busclass, driver_t *driver) { devclass_t dc = devclass_find(driver->name); driverlink_t dl; int error; PDEBUG(("%s from devclass %s", driver->name, DEVCLANAME(busclass))); if (!dc) return (0); /* * Find the link structure in the bus' list of drivers. */ TAILQ_FOREACH(dl, &busclass->drivers, link) { if (dl->driver == driver) break; } if (!dl) { PDEBUG(("%s not found in %s list", driver->name, busclass->name)); return (ENOENT); } error = devclass_driver_deleted(busclass, dc, driver); if (error != 0) return (error); TAILQ_REMOVE(&busclass->drivers, dl, link); free(dl, M_BUS); /* XXX: kobj_mtx */ driver->refs--; if (driver->refs == 0) kobj_class_free((kobj_class_t) driver); bus_data_generation_update(); return (0); } /** * @brief Quiesces a set of device drivers from a device class * * Quiesce a device driver from a devclass. This is normally called * automatically by DRIVER_MODULE(). * * If the driver is currently attached to any devices, * devclass_quiesece_driver() will first attempt to quiesce each * device. * * @param dc the devclass to edit * @param driver the driver to unregister */ static int devclass_quiesce_driver(devclass_t busclass, driver_t *driver) { devclass_t dc = devclass_find(driver->name); driverlink_t dl; device_t dev; int i; int error; PDEBUG(("%s from devclass %s", driver->name, DEVCLANAME(busclass))); if (!dc) return (0); /* * Find the link structure in the bus' list of drivers. */ TAILQ_FOREACH(dl, &busclass->drivers, link) { if (dl->driver == driver) break; } if (!dl) { PDEBUG(("%s not found in %s list", driver->name, busclass->name)); return (ENOENT); } /* * Quiesce all devices. We iterate through all the devices in * the devclass of the driver and quiesce any which are using * the driver and which have a parent in the devclass which we * are quiescing. * * Note that since a driver can be in multiple devclasses, we * should not quiesce devices which are not children of * devices in the affected devclass. */ for (i = 0; i < dc->maxunit; i++) { if (dc->devices[i]) { dev = dc->devices[i]; if (dev->driver == driver && dev->parent && dev->parent->devclass == busclass) { if ((error = device_quiesce(dev)) != 0) return (error); } } } return (0); } /** * @internal */ static driverlink_t devclass_find_driver_internal(devclass_t dc, const char *classname) { driverlink_t dl; PDEBUG(("%s in devclass %s", classname, DEVCLANAME(dc))); TAILQ_FOREACH(dl, &dc->drivers, link) { if (!strcmp(dl->driver->name, classname)) return (dl); } PDEBUG(("not found")); return (NULL); } /** * @brief Return the name of the devclass */ const char * devclass_get_name(devclass_t dc) { return (dc->name); } /** * @brief Find a device given a unit number * * @param dc the devclass to search * @param unit the unit number to search for * * @returns the device with the given unit number or @c * NULL if there is no such device */ device_t devclass_get_device(devclass_t dc, int unit) { if (dc == NULL || unit < 0 || unit >= dc->maxunit) return (NULL); return (dc->devices[unit]); } /** * @brief Find the softc field of a device given a unit number * * @param dc the devclass to search * @param unit the unit number to search for * * @returns the softc field of the device with the given * unit number or @c NULL if there is no such * device */ void * devclass_get_softc(devclass_t dc, int unit) { device_t dev; dev = devclass_get_device(dc, unit); if (!dev) return (NULL); return (device_get_softc(dev)); } /** * @brief Get a list of devices in the devclass * * An array containing a list of all the devices in the given devclass * is allocated and returned in @p *devlistp. The number of devices * in the array is returned in @p *devcountp. The caller should free * the array using @c free(p, M_TEMP), even if @p *devcountp is 0. * * @param dc the devclass to examine * @param devlistp points at location for array pointer return * value * @param devcountp points at location for array size return value * * @retval 0 success * @retval ENOMEM the array allocation failed */ int devclass_get_devices(devclass_t dc, device_t **devlistp, int *devcountp) { int count, i; device_t *list; count = devclass_get_count(dc); list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT|M_ZERO); if (!list) return (ENOMEM); count = 0; for (i = 0; i < dc->maxunit; i++) { if (dc->devices[i]) { list[count] = dc->devices[i]; count++; } } *devlistp = list; *devcountp = count; return (0); } /** * @brief Get a list of drivers in the devclass * * An array containing a list of pointers to all the drivers in the * given devclass is allocated and returned in @p *listp. The number * of drivers in the array is returned in @p *countp. The caller should * free the array using @c free(p, M_TEMP). * * @param dc the devclass to examine * @param listp gives location for array pointer return value * @param countp gives location for number of array elements * return value * * @retval 0 success * @retval ENOMEM the array allocation failed */ int devclass_get_drivers(devclass_t dc, driver_t ***listp, int *countp) { driverlink_t dl; driver_t **list; int count; count = 0; TAILQ_FOREACH(dl, &dc->drivers, link) count++; list = malloc(count * sizeof(driver_t *), M_TEMP, M_NOWAIT); if (list == NULL) return (ENOMEM); count = 0; TAILQ_FOREACH(dl, &dc->drivers, link) { list[count] = dl->driver; count++; } *listp = list; *countp = count; return (0); } /** * @brief Get the number of devices in a devclass * * @param dc the devclass to examine */ int devclass_get_count(devclass_t dc) { int count, i; count = 0; for (i = 0; i < dc->maxunit; i++) if (dc->devices[i]) count++; return (count); } /** * @brief Get the maximum unit number used in a devclass * * Note that this is one greater than the highest currently-allocated * unit. If a null devclass_t is passed in, -1 is returned to indicate * that not even the devclass has been allocated yet. * * @param dc the devclass to examine */ int devclass_get_maxunit(devclass_t dc) { if (dc == NULL) return (-1); return (dc->maxunit); } /** * @brief Find a free unit number in a devclass * * This function searches for the first unused unit number greater * that or equal to @p unit. * * @param dc the devclass to examine * @param unit the first unit number to check */ int devclass_find_free_unit(devclass_t dc, int unit) { if (dc == NULL) return (unit); while (unit < dc->maxunit && dc->devices[unit] != NULL) unit++; return (unit); } /** * @brief Set the parent of a devclass * * The parent class is normally initialised automatically by * DRIVER_MODULE(). * * @param dc the devclass to edit * @param pdc the new parent devclass */ void devclass_set_parent(devclass_t dc, devclass_t pdc) { dc->parent = pdc; } /** * @brief Get the parent of a devclass * * @param dc the devclass to examine */ devclass_t devclass_get_parent(devclass_t dc) { return (dc->parent); } struct sysctl_ctx_list * devclass_get_sysctl_ctx(devclass_t dc) { return (&dc->sysctl_ctx); } struct sysctl_oid * devclass_get_sysctl_tree(devclass_t dc) { return (dc->sysctl_tree); } /** * @internal * @brief Allocate a unit number * * On entry, @p *unitp is the desired unit number (or @c -1 if any * will do). The allocated unit number is returned in @p *unitp. * @param dc the devclass to allocate from * @param unitp points at the location for the allocated unit * number * * @retval 0 success * @retval EEXIST the requested unit number is already allocated * @retval ENOMEM memory allocation failure */ static int devclass_alloc_unit(devclass_t dc, device_t dev, int *unitp) { const char *s; int unit = *unitp; PDEBUG(("unit %d in devclass %s", unit, DEVCLANAME(dc))); /* Ask the parent bus if it wants to wire this device. */ if (unit == -1) BUS_HINT_DEVICE_UNIT(device_get_parent(dev), dev, dc->name, &unit); /* If we were given a wired unit number, check for existing device */ /* XXX imp XXX */ if (unit != -1) { if (unit >= 0 && unit < dc->maxunit && dc->devices[unit] != NULL) { if (bootverbose) printf("%s: %s%d already exists; skipping it\n", dc->name, dc->name, *unitp); return (EEXIST); } } else { /* Unwired device, find the next available slot for it */ unit = 0; for (unit = 0;; unit++) { /* If there is an "at" hint for a unit then skip it. */ if (resource_string_value(dc->name, unit, "at", &s) == 0) continue; /* If this device slot is already in use, skip it. */ if (unit < dc->maxunit && dc->devices[unit] != NULL) continue; break; } } /* * We've selected a unit beyond the length of the table, so let's * extend the table to make room for all units up to and including * this one. */ if (unit >= dc->maxunit) { device_t *newlist, *oldlist; int newsize; oldlist = dc->devices; newsize = roundup((unit + 1), MAX(1, MINALLOCSIZE / sizeof(device_t))); newlist = malloc(sizeof(device_t) * newsize, M_BUS, M_NOWAIT); if (!newlist) return (ENOMEM); if (oldlist != NULL) bcopy(oldlist, newlist, sizeof(device_t) * dc->maxunit); bzero(newlist + dc->maxunit, sizeof(device_t) * (newsize - dc->maxunit)); dc->devices = newlist; dc->maxunit = newsize; if (oldlist != NULL) free(oldlist, M_BUS); } PDEBUG(("now: unit %d in devclass %s", unit, DEVCLANAME(dc))); *unitp = unit; return (0); } /** * @internal * @brief Add a device to a devclass * * A unit number is allocated for the device (using the device's * preferred unit number if any) and the device is registered in the * devclass. This allows the device to be looked up by its unit * number, e.g. by decoding a dev_t minor number. * * @param dc the devclass to add to * @param dev the device to add * * @retval 0 success * @retval EEXIST the requested unit number is already allocated * @retval ENOMEM memory allocation failure */ static int devclass_add_device(devclass_t dc, device_t dev) { int buflen, error; PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc))); buflen = snprintf(NULL, 0, "%s%d$", dc->name, INT_MAX); if (buflen < 0) return (ENOMEM); dev->nameunit = malloc(buflen, M_BUS, M_NOWAIT|M_ZERO); if (!dev->nameunit) return (ENOMEM); if ((error = devclass_alloc_unit(dc, dev, &dev->unit)) != 0) { free(dev->nameunit, M_BUS); dev->nameunit = NULL; return (error); } dc->devices[dev->unit] = dev; dev->devclass = dc; snprintf(dev->nameunit, buflen, "%s%d", dc->name, dev->unit); return (0); } /** * @internal * @brief Delete a device from a devclass * * The device is removed from the devclass's device list and its unit * number is freed. * @param dc the devclass to delete from * @param dev the device to delete * * @retval 0 success */ static int devclass_delete_device(devclass_t dc, device_t dev) { if (!dc || !dev) return (0); PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc))); if (dev->devclass != dc || dc->devices[dev->unit] != dev) panic("devclass_delete_device: inconsistent device class"); dc->devices[dev->unit] = NULL; if (dev->flags & DF_WILDCARD) dev->unit = -1; dev->devclass = NULL; free(dev->nameunit, M_BUS); dev->nameunit = NULL; return (0); } /** * @internal * @brief Make a new device and add it as a child of @p parent * * @param parent the parent of the new device * @param name the devclass name of the new device or @c NULL * to leave the devclass unspecified * @parem unit the unit number of the new device of @c -1 to * leave the unit number unspecified * * @returns the new device */ static device_t make_device(device_t parent, const char *name, int unit) { device_t dev; devclass_t dc; PDEBUG(("%s at %s as unit %d", name, DEVICENAME(parent), unit)); if (name) { dc = devclass_find_internal(name, NULL, TRUE); if (!dc) { printf("make_device: can't find device class %s\n", name); return (NULL); } } else { dc = NULL; } dev = malloc(sizeof(*dev), M_BUS, M_NOWAIT|M_ZERO); if (!dev) return (NULL); dev->parent = parent; TAILQ_INIT(&dev->children); kobj_init((kobj_t) dev, &null_class); dev->driver = NULL; dev->devclass = NULL; dev->unit = unit; dev->nameunit = NULL; dev->desc = NULL; dev->busy = 0; dev->devflags = 0; dev->flags = DF_ENABLED; dev->order = 0; if (unit == -1) dev->flags |= DF_WILDCARD; if (name) { dev->flags |= DF_FIXEDCLASS; if (devclass_add_device(dc, dev)) { kobj_delete((kobj_t) dev, M_BUS); return (NULL); } } if (parent != NULL && device_has_quiet_children(parent)) dev->flags |= DF_QUIET | DF_QUIET_CHILDREN; dev->ivars = NULL; dev->softc = NULL; dev->state = DS_NOTPRESENT; TAILQ_INSERT_TAIL(&bus_data_devices, dev, devlink); bus_data_generation_update(); return (dev); } /** * @internal * @brief Print a description of a device. */ static int device_print_child(device_t dev, device_t child) { int retval = 0; if (device_is_alive(child)) retval += BUS_PRINT_CHILD(dev, child); else retval += device_printf(child, " not found\n"); return (retval); } /** * @brief Create a new device * * This creates a new device and adds it as a child of an existing * parent device. The new device will be added after the last existing * child with order zero. * * @param dev the device which will be the parent of the * new child device * @param name devclass name for new device or @c NULL if not * specified * @param unit unit number for new device or @c -1 if not * specified * * @returns the new device */ device_t device_add_child(device_t dev, const char *name, int unit) { return (device_add_child_ordered(dev, 0, name, unit)); } /** * @brief Create a new device * * This creates a new device and adds it as a child of an existing * parent device. The new device will be added after the last existing * child with the same order. * * @param dev the device which will be the parent of the * new child device * @param order a value which is used to partially sort the * children of @p dev - devices created using * lower values of @p order appear first in @p * dev's list of children * @param name devclass name for new device or @c NULL if not * specified * @param unit unit number for new device or @c -1 if not * specified * * @returns the new device */ device_t device_add_child_ordered(device_t dev, u_int order, const char *name, int unit) { device_t child; device_t place; PDEBUG(("%s at %s with order %u as unit %d", name, DEVICENAME(dev), order, unit)); KASSERT(name != NULL || unit == -1, ("child device with wildcard name and specific unit number")); child = make_device(dev, name, unit); if (child == NULL) return (child); child->order = order; TAILQ_FOREACH(place, &dev->children, link) { if (place->order > order) break; } if (place) { /* * The device 'place' is the first device whose order is * greater than the new child. */ TAILQ_INSERT_BEFORE(place, child, link); } else { /* * The new child's order is greater or equal to the order of * any existing device. Add the child to the tail of the list. */ TAILQ_INSERT_TAIL(&dev->children, child, link); } bus_data_generation_update(); return (child); } /** * @brief Delete a device * * This function deletes a device along with all of its children. If * the device currently has a driver attached to it, the device is * detached first using device_detach(). * * @param dev the parent device * @param child the device to delete * * @retval 0 success * @retval non-zero a unit error code describing the error */ int device_delete_child(device_t dev, device_t child) { int error; device_t grandchild; PDEBUG(("%s from %s", DEVICENAME(child), DEVICENAME(dev))); /* detach parent before deleting children, if any */ if ((error = device_detach(child)) != 0) return (error); /* remove children second */ while ((grandchild = TAILQ_FIRST(&child->children)) != NULL) { error = device_delete_child(child, grandchild); if (error) return (error); } if (child->devclass) devclass_delete_device(child->devclass, child); if (child->parent) BUS_CHILD_DELETED(dev, child); TAILQ_REMOVE(&dev->children, child, link); TAILQ_REMOVE(&bus_data_devices, child, devlink); kobj_delete((kobj_t) child, M_BUS); bus_data_generation_update(); return (0); } /** * @brief Delete all children devices of the given device, if any. * * This function deletes all children devices of the given device, if * any, using the device_delete_child() function for each device it * finds. If a child device cannot be deleted, this function will * return an error code. * * @param dev the parent device * * @retval 0 success * @retval non-zero a device would not detach */ int device_delete_children(device_t dev) { device_t child; int error; PDEBUG(("Deleting all children of %s", DEVICENAME(dev))); error = 0; while ((child = TAILQ_FIRST(&dev->children)) != NULL) { error = device_delete_child(dev, child); if (error) { PDEBUG(("Failed deleting %s", DEVICENAME(child))); break; } } return (error); } /** * @brief Find a device given a unit number * * This is similar to devclass_get_devices() but only searches for * devices which have @p dev as a parent. * * @param dev the parent device to search * @param unit the unit number to search for. If the unit is -1, * return the first child of @p dev which has name * @p classname (that is, the one with the lowest unit.) * * @returns the device with the given unit number or @c * NULL if there is no such device */ device_t device_find_child(device_t dev, const char *classname, int unit) { devclass_t dc; device_t child; dc = devclass_find(classname); if (!dc) return (NULL); if (unit != -1) { child = devclass_get_device(dc, unit); if (child && child->parent == dev) return (child); } else { for (unit = 0; unit < devclass_get_maxunit(dc); unit++) { child = devclass_get_device(dc, unit); if (child && child->parent == dev) return (child); } } return (NULL); } /** * @internal */ static driverlink_t first_matching_driver(devclass_t dc, device_t dev) { if (dev->devclass) return (devclass_find_driver_internal(dc, dev->devclass->name)); return (TAILQ_FIRST(&dc->drivers)); } /** * @internal */ static driverlink_t next_matching_driver(devclass_t dc, device_t dev, driverlink_t last) { if (dev->devclass) { driverlink_t dl; for (dl = TAILQ_NEXT(last, link); dl; dl = TAILQ_NEXT(dl, link)) if (!strcmp(dev->devclass->name, dl->driver->name)) return (dl); return (NULL); } return (TAILQ_NEXT(last, link)); } /** * @internal */ int device_probe_child(device_t dev, device_t child) { devclass_t dc; driverlink_t best = NULL; driverlink_t dl; int result, pri = 0; int hasclass = (child->devclass != NULL); GIANT_REQUIRED; dc = dev->devclass; if (!dc) panic("device_probe_child: parent device has no devclass"); /* * If the state is already probed, then return. However, don't * return if we can rebid this object. */ if (child->state == DS_ALIVE && (child->flags & DF_REBID) == 0) return (0); for (; dc; dc = dc->parent) { for (dl = first_matching_driver(dc, child); dl; dl = next_matching_driver(dc, child, dl)) { /* If this driver's pass is too high, then ignore it. */ if (dl->pass > bus_current_pass) continue; PDEBUG(("Trying %s", DRIVERNAME(dl->driver))); result = device_set_driver(child, dl->driver); if (result == ENOMEM) return (result); else if (result != 0) continue; if (!hasclass) { if (device_set_devclass(child, dl->driver->name) != 0) { char const * devname = device_get_name(child); if (devname == NULL) devname = "(unknown)"; printf("driver bug: Unable to set " "devclass (class: %s " "devname: %s)\n", dl->driver->name, devname); (void)device_set_driver(child, NULL); continue; } } /* Fetch any flags for the device before probing. */ resource_int_value(dl->driver->name, child->unit, "flags", &child->devflags); result = DEVICE_PROBE(child); /* Reset flags and devclass before the next probe. */ child->devflags = 0; if (!hasclass) (void)device_set_devclass(child, NULL); /* * If the driver returns SUCCESS, there can be * no higher match for this device. */ if (result == 0) { best = dl; pri = 0; break; } /* * Reset DF_QUIET in case this driver doesn't * end up as the best driver. */ device_verbose(child); /* * Probes that return BUS_PROBE_NOWILDCARD or lower * only match on devices whose driver was explicitly * specified. */ if (result <= BUS_PROBE_NOWILDCARD && !(child->flags & DF_FIXEDCLASS)) { result = ENXIO; } /* * The driver returned an error so it * certainly doesn't match. */ if (result > 0) { (void)device_set_driver(child, NULL); continue; } /* * A priority lower than SUCCESS, remember the * best matching driver. Initialise the value * of pri for the first match. */ if (best == NULL || result > pri) { best = dl; pri = result; continue; } } /* * If we have an unambiguous match in this devclass, * don't look in the parent. */ if (best && pri == 0) break; } /* * If we found a driver, change state and initialise the devclass. */ /* XXX What happens if we rebid and got no best? */ if (best) { /* * If this device was attached, and we were asked to * rescan, and it is a different driver, then we have * to detach the old driver and reattach this new one. * Note, we don't have to check for DF_REBID here * because if the state is > DS_ALIVE, we know it must * be. * * This assumes that all DF_REBID drivers can have * their probe routine called at any time and that * they are idempotent as well as completely benign in * normal operations. * * We also have to make sure that the detach * succeeded, otherwise we fail the operation (or * maybe it should just fail silently? I'm torn). */ if (child->state > DS_ALIVE && best->driver != child->driver) if ((result = device_detach(dev)) != 0) return (result); /* Set the winning driver, devclass, and flags. */ if (!child->devclass) { result = device_set_devclass(child, best->driver->name); if (result != 0) return (result); } result = device_set_driver(child, best->driver); if (result != 0) return (result); resource_int_value(best->driver->name, child->unit, "flags", &child->devflags); if (pri < 0) { /* * A bit bogus. Call the probe method again to make * sure that we have the right description. */ DEVICE_PROBE(child); #if 0 child->flags |= DF_REBID; #endif } else child->flags &= ~DF_REBID; child->state = DS_ALIVE; bus_data_generation_update(); return (0); } return (ENXIO); } /** * @brief Return the parent of a device */ device_t device_get_parent(device_t dev) { return (dev->parent); } /** * @brief Get a list of children of a device * * An array containing a list of all the children of the given device * is allocated and returned in @p *devlistp. The number of devices * in the array is returned in @p *devcountp. The caller should free * the array using @c free(p, M_TEMP). * * @param dev the device to examine * @param devlistp points at location for array pointer return * value * @param devcountp points at location for array size return value * * @retval 0 success * @retval ENOMEM the array allocation failed */ int device_get_children(device_t dev, device_t **devlistp, int *devcountp) { int count; device_t child; device_t *list; count = 0; TAILQ_FOREACH(child, &dev->children, link) { count++; } if (count == 0) { *devlistp = NULL; *devcountp = 0; return (0); } list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT|M_ZERO); if (!list) return (ENOMEM); count = 0; TAILQ_FOREACH(child, &dev->children, link) { list[count] = child; count++; } *devlistp = list; *devcountp = count; return (0); } /** * @brief Return the current driver for the device or @c NULL if there * is no driver currently attached */ driver_t * device_get_driver(device_t dev) { return (dev->driver); } /** * @brief Return the current devclass for the device or @c NULL if * there is none. */ devclass_t device_get_devclass(device_t dev) { return (dev->devclass); } /** * @brief Return the name of the device's devclass or @c NULL if there * is none. */ const char * device_get_name(device_t dev) { if (dev != NULL && dev->devclass) return (devclass_get_name(dev->devclass)); return (NULL); } /** * @brief Return a string containing the device's devclass name * followed by an ascii representation of the device's unit number * (e.g. @c "foo2"). */ const char * device_get_nameunit(device_t dev) { return (dev->nameunit); } /** * @brief Return the device's unit number. */ int device_get_unit(device_t dev) { return (dev->unit); } /** * @brief Return the device's description string */ const char * device_get_desc(device_t dev) { return (dev->desc); } /** * @brief Return the device's flags */ uint32_t device_get_flags(device_t dev) { return (dev->devflags); } struct sysctl_ctx_list * device_get_sysctl_ctx(device_t dev) { return (&dev->sysctl_ctx); } struct sysctl_oid * device_get_sysctl_tree(device_t dev) { return (dev->sysctl_tree); } /** * @brief Print the name of the device followed by a colon and a space * * @returns the number of characters printed */ int device_print_prettyname(device_t dev) { const char *name = device_get_name(dev); if (name == NULL) return (printf("unknown: ")); return (printf("%s%d: ", name, device_get_unit(dev))); } /** * @brief Print the name of the device followed by a colon, a space * and the result of calling vprintf() with the value of @p fmt and * the following arguments. * * @returns the number of characters printed */ int device_printf(device_t dev, const char * fmt, ...) { char buf[128]; struct sbuf sb; const char *name; va_list ap; size_t retval; retval = 0; sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN); sbuf_set_drain(&sb, sbuf_printf_drain, &retval); name = device_get_name(dev); if (name == NULL) sbuf_cat(&sb, "unknown: "); else sbuf_printf(&sb, "%s%d: ", name, device_get_unit(dev)); va_start(ap, fmt); sbuf_vprintf(&sb, fmt, ap); va_end(ap); sbuf_finish(&sb); sbuf_delete(&sb); return (retval); } /** * @internal */ static void device_set_desc_internal(device_t dev, const char* desc, int copy) { if (dev->desc && (dev->flags & DF_DESCMALLOCED)) { free(dev->desc, M_BUS); dev->flags &= ~DF_DESCMALLOCED; dev->desc = NULL; } if (copy && desc) { dev->desc = malloc(strlen(desc) + 1, M_BUS, M_NOWAIT); if (dev->desc) { strcpy(dev->desc, desc); dev->flags |= DF_DESCMALLOCED; } } else { /* Avoid a -Wcast-qual warning */ dev->desc = (char *)(uintptr_t) desc; } bus_data_generation_update(); } /** * @brief Set the device's description * * The value of @c desc should be a string constant that will not * change (at least until the description is changed in a subsequent * call to device_set_desc() or device_set_desc_copy()). */ void device_set_desc(device_t dev, const char* desc) { device_set_desc_internal(dev, desc, FALSE); } /** * @brief Set the device's description * * The string pointed to by @c desc is copied. Use this function if * the device description is generated, (e.g. with sprintf()). */ void device_set_desc_copy(device_t dev, const char* desc) { device_set_desc_internal(dev, desc, TRUE); } /** * @brief Set the device's flags */ void device_set_flags(device_t dev, uint32_t flags) { dev->devflags = flags; } /** * @brief Return the device's softc field * * The softc is allocated and zeroed when a driver is attached, based * on the size field of the driver. */ void * device_get_softc(device_t dev) { return (dev->softc); } /** * @brief Set the device's softc field * * Most drivers do not need to use this since the softc is allocated * automatically when the driver is attached. */ void device_set_softc(device_t dev, void *softc) { if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC)) free(dev->softc, M_BUS_SC); dev->softc = softc; if (dev->softc) dev->flags |= DF_EXTERNALSOFTC; else dev->flags &= ~DF_EXTERNALSOFTC; } /** * @brief Free claimed softc * * Most drivers do not need to use this since the softc is freed * automatically when the driver is detached. */ void device_free_softc(void *softc) { free(softc, M_BUS_SC); } /** * @brief Claim softc * * This function can be used to let the driver free the automatically * allocated softc using "device_free_softc()". This function is * useful when the driver is refcounting the softc and the softc * cannot be freed when the "device_detach" method is called. */ void device_claim_softc(device_t dev) { if (dev->softc) dev->flags |= DF_EXTERNALSOFTC; else dev->flags &= ~DF_EXTERNALSOFTC; } /** * @brief Get the device's ivars field * * The ivars field is used by the parent device to store per-device * state (e.g. the physical location of the device or a list of * resources). */ void * device_get_ivars(device_t dev) { KASSERT(dev != NULL, ("device_get_ivars(NULL, ...)")); return (dev->ivars); } /** * @brief Set the device's ivars field */ void device_set_ivars(device_t dev, void * ivars) { KASSERT(dev != NULL, ("device_set_ivars(NULL, ...)")); dev->ivars = ivars; } /** * @brief Return the device's state */ device_state_t device_get_state(device_t dev) { return (dev->state); } /** * @brief Set the DF_ENABLED flag for the device */ void device_enable(device_t dev) { dev->flags |= DF_ENABLED; } /** * @brief Clear the DF_ENABLED flag for the device */ void device_disable(device_t dev) { dev->flags &= ~DF_ENABLED; } /** * @brief Increment the busy counter for the device */ void device_busy(device_t dev) { if (dev->state < DS_ATTACHING) panic("device_busy: called for unattached device"); if (dev->busy == 0 && dev->parent) device_busy(dev->parent); dev->busy++; if (dev->state == DS_ATTACHED) dev->state = DS_BUSY; } /** * @brief Decrement the busy counter for the device */ void device_unbusy(device_t dev) { if (dev->busy != 0 && dev->state != DS_BUSY && dev->state != DS_ATTACHING) panic("device_unbusy: called for non-busy device %s", device_get_nameunit(dev)); dev->busy--; if (dev->busy == 0) { if (dev->parent) device_unbusy(dev->parent); if (dev->state == DS_BUSY) dev->state = DS_ATTACHED; } } /** * @brief Set the DF_QUIET flag for the device */ void device_quiet(device_t dev) { dev->flags |= DF_QUIET; } /** * @brief Set the DF_QUIET_CHILDREN flag for the device */ void device_quiet_children(device_t dev) { dev->flags |= DF_QUIET_CHILDREN; } /** * @brief Clear the DF_QUIET flag for the device */ void device_verbose(device_t dev) { dev->flags &= ~DF_QUIET; } /** * @brief Return non-zero if the DF_QUIET_CHIDLREN flag is set on the device */ int device_has_quiet_children(device_t dev) { return ((dev->flags & DF_QUIET_CHILDREN) != 0); } /** * @brief Return non-zero if the DF_QUIET flag is set on the device */ int device_is_quiet(device_t dev) { return ((dev->flags & DF_QUIET) != 0); } /** * @brief Return non-zero if the DF_ENABLED flag is set on the device */ int device_is_enabled(device_t dev) { return ((dev->flags & DF_ENABLED) != 0); } /** * @brief Return non-zero if the device was successfully probed */ int device_is_alive(device_t dev) { return (dev->state >= DS_ALIVE); } /** * @brief Return non-zero if the device currently has a driver * attached to it */ int device_is_attached(device_t dev) { return (dev->state >= DS_ATTACHED); } /** * @brief Return non-zero if the device is currently suspended. */ int device_is_suspended(device_t dev) { return ((dev->flags & DF_SUSPENDED) != 0); } /** * @brief Set the devclass of a device * @see devclass_add_device(). */ int device_set_devclass(device_t dev, const char *classname) { devclass_t dc; int error; if (!classname) { if (dev->devclass) devclass_delete_device(dev->devclass, dev); return (0); } if (dev->devclass) { printf("device_set_devclass: device class already set\n"); return (EINVAL); } dc = devclass_find_internal(classname, NULL, TRUE); if (!dc) return (ENOMEM); error = devclass_add_device(dc, dev); bus_data_generation_update(); return (error); } /** * @brief Set the devclass of a device and mark the devclass fixed. * @see device_set_devclass() */ int device_set_devclass_fixed(device_t dev, const char *classname) { int error; if (classname == NULL) return (EINVAL); error = device_set_devclass(dev, classname); if (error) return (error); dev->flags |= DF_FIXEDCLASS; return (0); } /** * @brief Query the device to determine if it's of a fixed devclass * @see device_set_devclass_fixed() */ bool device_is_devclass_fixed(device_t dev) { return ((dev->flags & DF_FIXEDCLASS) != 0); } /** * @brief Set the driver of a device * * @retval 0 success * @retval EBUSY the device already has a driver attached * @retval ENOMEM a memory allocation failure occurred */ int device_set_driver(device_t dev, driver_t *driver) { int domain; struct domainset *policy; if (dev->state >= DS_ATTACHED) return (EBUSY); if (dev->driver == driver) return (0); if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC)) { free(dev->softc, M_BUS_SC); dev->softc = NULL; } device_set_desc(dev, NULL); kobj_delete((kobj_t) dev, NULL); dev->driver = driver; if (driver) { kobj_init((kobj_t) dev, (kobj_class_t) driver); if (!(dev->flags & DF_EXTERNALSOFTC) && driver->size > 0) { if (bus_get_domain(dev, &domain) == 0) policy = DOMAINSET_PREF(domain); else policy = DOMAINSET_RR(); dev->softc = malloc_domainset(driver->size, M_BUS_SC, policy, M_NOWAIT | M_ZERO); if (!dev->softc) { kobj_delete((kobj_t) dev, NULL); kobj_init((kobj_t) dev, &null_class); dev->driver = NULL; return (ENOMEM); } } } else { kobj_init((kobj_t) dev, &null_class); } bus_data_generation_update(); return (0); } /** * @brief Probe a device, and return this status. * * This function is the core of the device autoconfiguration * system. Its purpose is to select a suitable driver for a device and * then call that driver to initialise the hardware appropriately. The * driver is selected by calling the DEVICE_PROBE() method of a set of * candidate drivers and then choosing the driver which returned the * best value. This driver is then attached to the device using * device_attach(). * * The set of suitable drivers is taken from the list of drivers in * the parent device's devclass. If the device was originally created * with a specific class name (see device_add_child()), only drivers * with that name are probed, otherwise all drivers in the devclass * are probed. If no drivers return successful probe values in the * parent devclass, the search continues in the parent of that * devclass (see devclass_get_parent()) if any. * * @param dev the device to initialise * * @retval 0 success * @retval ENXIO no driver was found * @retval ENOMEM memory allocation failure * @retval non-zero some other unix error code * @retval -1 Device already attached */ int device_probe(device_t dev) { int error; GIANT_REQUIRED; if (dev->state >= DS_ALIVE && (dev->flags & DF_REBID) == 0) return (-1); if (!(dev->flags & DF_ENABLED)) { if (bootverbose && device_get_name(dev) != NULL) { device_print_prettyname(dev); printf("not probed (disabled)\n"); } return (-1); } if ((error = device_probe_child(dev->parent, dev)) != 0) { if (bus_current_pass == BUS_PASS_DEFAULT && !(dev->flags & DF_DONENOMATCH)) { BUS_PROBE_NOMATCH(dev->parent, dev); devnomatch(dev); dev->flags |= DF_DONENOMATCH; } return (error); } return (0); } /** * @brief Probe a device and attach a driver if possible * * calls device_probe() and attaches if that was successful. */ int device_probe_and_attach(device_t dev) { int error; GIANT_REQUIRED; error = device_probe(dev); if (error == -1) return (0); else if (error != 0) return (error); CURVNET_SET_QUIET(vnet0); error = device_attach(dev); CURVNET_RESTORE(); return error; } /** * @brief Attach a device driver to a device * * This function is a wrapper around the DEVICE_ATTACH() driver * method. In addition to calling DEVICE_ATTACH(), it initialises the * device's sysctl tree, optionally prints a description of the device * and queues a notification event for user-based device management * services. * * Normally this function is only called internally from * device_probe_and_attach(). * * @param dev the device to initialise * * @retval 0 success * @retval ENXIO no driver was found * @retval ENOMEM memory allocation failure * @retval non-zero some other unix error code */ int device_attach(device_t dev) { uint64_t attachtime; uint16_t attachentropy; int error; if (resource_disabled(dev->driver->name, dev->unit)) { device_disable(dev); if (bootverbose) device_printf(dev, "disabled via hints entry\n"); return (ENXIO); } device_sysctl_init(dev); if (!device_is_quiet(dev)) device_print_child(dev->parent, dev); attachtime = get_cyclecount(); dev->state = DS_ATTACHING; if ((error = DEVICE_ATTACH(dev)) != 0) { printf("device_attach: %s%d attach returned %d\n", dev->driver->name, dev->unit, error); if (!(dev->flags & DF_FIXEDCLASS)) devclass_delete_device(dev->devclass, dev); (void)device_set_driver(dev, NULL); device_sysctl_fini(dev); KASSERT(dev->busy == 0, ("attach failed but busy")); dev->state = DS_NOTPRESENT; return (error); } dev->flags |= DF_ATTACHED_ONCE; /* We only need the low bits of this time, but ranges from tens to thousands * have been seen, so keep 2 bytes' worth. */ attachentropy = (uint16_t)(get_cyclecount() - attachtime); random_harvest_direct(&attachentropy, sizeof(attachentropy), RANDOM_ATTACH); device_sysctl_update(dev); if (dev->busy) dev->state = DS_BUSY; else dev->state = DS_ATTACHED; dev->flags &= ~DF_DONENOMATCH; EVENTHANDLER_DIRECT_INVOKE(device_attach, dev); devadded(dev); return (0); } /** * @brief Detach a driver from a device * * This function is a wrapper around the DEVICE_DETACH() driver * method. If the call to DEVICE_DETACH() succeeds, it calls * BUS_CHILD_DETACHED() for the parent of @p dev, queues a * notification event for user-based device management services and * cleans up the device's sysctl tree. * * @param dev the device to un-initialise * * @retval 0 success * @retval ENXIO no driver was found * @retval ENOMEM memory allocation failure * @retval non-zero some other unix error code */ int device_detach(device_t dev) { int error; GIANT_REQUIRED; PDEBUG(("%s", DEVICENAME(dev))); if (dev->state == DS_BUSY) return (EBUSY); if (dev->state == DS_ATTACHING) { device_printf(dev, "device in attaching state! Deferring detach.\n"); return (EBUSY); } if (dev->state != DS_ATTACHED) return (0); EVENTHANDLER_DIRECT_INVOKE(device_detach, dev, EVHDEV_DETACH_BEGIN); if ((error = DEVICE_DETACH(dev)) != 0) { EVENTHANDLER_DIRECT_INVOKE(device_detach, dev, EVHDEV_DETACH_FAILED); return (error); } else { EVENTHANDLER_DIRECT_INVOKE(device_detach, dev, EVHDEV_DETACH_COMPLETE); } devremoved(dev); if (!device_is_quiet(dev)) device_printf(dev, "detached\n"); if (dev->parent) BUS_CHILD_DETACHED(dev->parent, dev); if (!(dev->flags & DF_FIXEDCLASS)) devclass_delete_device(dev->devclass, dev); device_verbose(dev); dev->state = DS_NOTPRESENT; (void)device_set_driver(dev, NULL); device_sysctl_fini(dev); return (0); } /** * @brief Tells a driver to quiesce itself. * * This function is a wrapper around the DEVICE_QUIESCE() driver * method. If the call to DEVICE_QUIESCE() succeeds. * * @param dev the device to quiesce * * @retval 0 success * @retval ENXIO no driver was found * @retval ENOMEM memory allocation failure * @retval non-zero some other unix error code */ int device_quiesce(device_t dev) { PDEBUG(("%s", DEVICENAME(dev))); if (dev->state == DS_BUSY) return (EBUSY); if (dev->state != DS_ATTACHED) return (0); return (DEVICE_QUIESCE(dev)); } /** * @brief Notify a device of system shutdown * * This function calls the DEVICE_SHUTDOWN() driver method if the * device currently has an attached driver. * * @returns the value returned by DEVICE_SHUTDOWN() */ int device_shutdown(device_t dev) { if (dev->state < DS_ATTACHED) return (0); return (DEVICE_SHUTDOWN(dev)); } /** * @brief Set the unit number of a device * * This function can be used to override the unit number used for a * device (e.g. to wire a device to a pre-configured unit number). */ int device_set_unit(device_t dev, int unit) { devclass_t dc; int err; dc = device_get_devclass(dev); if (unit < dc->maxunit && dc->devices[unit]) return (EBUSY); err = devclass_delete_device(dc, dev); if (err) return (err); dev->unit = unit; err = devclass_add_device(dc, dev); if (err) return (err); bus_data_generation_update(); return (0); } /*======================================*/ /* * Some useful method implementations to make life easier for bus drivers. */ void resource_init_map_request_impl(struct resource_map_request *args, size_t sz) { bzero(args, sz); args->size = sz; args->memattr = VM_MEMATTR_UNCACHEABLE; } /** * @brief Initialise a resource list. * * @param rl the resource list to initialise */ void resource_list_init(struct resource_list *rl) { STAILQ_INIT(rl); } /** * @brief Reclaim memory used by a resource list. * * This function frees the memory for all resource entries on the list * (if any). * * @param rl the resource list to free */ void resource_list_free(struct resource_list *rl) { struct resource_list_entry *rle; while ((rle = STAILQ_FIRST(rl)) != NULL) { if (rle->res) panic("resource_list_free: resource entry is busy"); STAILQ_REMOVE_HEAD(rl, link); free(rle, M_BUS); } } /** * @brief Add a resource entry. * * This function adds a resource entry using the given @p type, @p * start, @p end and @p count values. A rid value is chosen by * searching sequentially for the first unused rid starting at zero. * * @param rl the resource list to edit * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param start the start address of the resource * @param end the end address of the resource * @param count XXX end-start+1 */ int resource_list_add_next(struct resource_list *rl, int type, rman_res_t start, rman_res_t end, rman_res_t count) { int rid; rid = 0; while (resource_list_find(rl, type, rid) != NULL) rid++; resource_list_add(rl, type, rid, start, end, count); return (rid); } /** * @brief Add or modify a resource entry. * * If an existing entry exists with the same type and rid, it will be * modified using the given values of @p start, @p end and @p * count. If no entry exists, a new one will be created using the * given values. The resource list entry that matches is then returned. * * @param rl the resource list to edit * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier * @param start the start address of the resource * @param end the end address of the resource * @param count XXX end-start+1 */ struct resource_list_entry * resource_list_add(struct resource_list *rl, int type, int rid, rman_res_t start, rman_res_t end, rman_res_t count) { struct resource_list_entry *rle; rle = resource_list_find(rl, type, rid); if (!rle) { rle = malloc(sizeof(struct resource_list_entry), M_BUS, M_NOWAIT); if (!rle) panic("resource_list_add: can't record entry"); STAILQ_INSERT_TAIL(rl, rle, link); rle->type = type; rle->rid = rid; rle->res = NULL; rle->flags = 0; } if (rle->res) panic("resource_list_add: resource entry is busy"); rle->start = start; rle->end = end; rle->count = count; return (rle); } /** * @brief Determine if a resource entry is busy. * * Returns true if a resource entry is busy meaning that it has an * associated resource that is not an unallocated "reserved" resource. * * @param rl the resource list to search * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier * * @returns Non-zero if the entry is busy, zero otherwise. */ int resource_list_busy(struct resource_list *rl, int type, int rid) { struct resource_list_entry *rle; rle = resource_list_find(rl, type, rid); if (rle == NULL || rle->res == NULL) return (0); if ((rle->flags & (RLE_RESERVED | RLE_ALLOCATED)) == RLE_RESERVED) { KASSERT(!(rman_get_flags(rle->res) & RF_ACTIVE), ("reserved resource is active")); return (0); } return (1); } /** * @brief Determine if a resource entry is reserved. * * Returns true if a resource entry is reserved meaning that it has an * associated "reserved" resource. The resource can either be * allocated or unallocated. * * @param rl the resource list to search * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier * * @returns Non-zero if the entry is reserved, zero otherwise. */ int resource_list_reserved(struct resource_list *rl, int type, int rid) { struct resource_list_entry *rle; rle = resource_list_find(rl, type, rid); if (rle != NULL && rle->flags & RLE_RESERVED) return (1); return (0); } /** * @brief Find a resource entry by type and rid. * * @param rl the resource list to search * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier * * @returns the resource entry pointer or NULL if there is no such * entry. */ struct resource_list_entry * resource_list_find(struct resource_list *rl, int type, int rid) { struct resource_list_entry *rle; STAILQ_FOREACH(rle, rl, link) { if (rle->type == type && rle->rid == rid) return (rle); } return (NULL); } /** * @brief Delete a resource entry. * * @param rl the resource list to edit * @param type the resource entry type (e.g. SYS_RES_MEMORY) * @param rid the resource identifier */ void resource_list_delete(struct resource_list *rl, int type, int rid) { struct resource_list_entry *rle = resource_list_find(rl, type, rid); if (rle) { if (rle->res != NULL) panic("resource_list_delete: resource has not been released"); STAILQ_REMOVE(rl, rle, resource_list_entry, link); free(rle, M_BUS); } } /** * @brief Allocate a reserved resource * * This can be used by buses to force the allocation of resources * that are always active in the system even if they are not allocated * by a driver (e.g. PCI BARs). This function is usually called when * adding a new child to the bus. The resource is allocated from the * parent bus when it is reserved. The resource list entry is marked * with RLE_RESERVED to note that it is a reserved resource. * * Subsequent attempts to allocate the resource with * resource_list_alloc() will succeed the first time and will set * RLE_ALLOCATED to note that it has been allocated. When a reserved * resource that has been allocated is released with * resource_list_release() the resource RLE_ALLOCATED is cleared, but * the actual resource remains allocated. The resource can be released to * the parent bus by calling resource_list_unreserve(). * * @param rl the resource list to allocate from * @param bus the parent device of @p child * @param child the device for which the resource is being reserved * @param type the type of resource to allocate * @param rid a pointer to the resource identifier * @param start hint at the start of the resource range - pass * @c 0 for any start address * @param end hint at the end of the resource range - pass * @c ~0 for any end address * @param count hint at the size of range required - pass @c 1 * for any size * @param flags any extra flags to control the resource * allocation - see @c RF_XXX flags in * for details * * @returns the resource which was allocated or @c NULL if no * resource could be allocated */ struct resource * resource_list_reserve(struct resource_list *rl, device_t bus, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource_list_entry *rle = NULL; int passthrough = (device_get_parent(child) != bus); struct resource *r; if (passthrough) panic( "resource_list_reserve() should only be called for direct children"); if (flags & RF_ACTIVE) panic( "resource_list_reserve() should only reserve inactive resources"); r = resource_list_alloc(rl, bus, child, type, rid, start, end, count, flags); if (r != NULL) { rle = resource_list_find(rl, type, *rid); rle->flags |= RLE_RESERVED; } return (r); } /** * @brief Helper function for implementing BUS_ALLOC_RESOURCE() * * Implement BUS_ALLOC_RESOURCE() by looking up a resource from the list * and passing the allocation up to the parent of @p bus. This assumes * that the first entry of @c device_get_ivars(child) is a struct * resource_list. This also handles 'passthrough' allocations where a * child is a remote descendant of bus by passing the allocation up to * the parent of bus. * * Typically, a bus driver would store a list of child resources * somewhere in the child device's ivars (see device_get_ivars()) and * its implementation of BUS_ALLOC_RESOURCE() would find that list and * then call resource_list_alloc() to perform the allocation. * * @param rl the resource list to allocate from * @param bus the parent device of @p child * @param child the device which is requesting an allocation * @param type the type of resource to allocate * @param rid a pointer to the resource identifier * @param start hint at the start of the resource range - pass * @c 0 for any start address * @param end hint at the end of the resource range - pass * @c ~0 for any end address * @param count hint at the size of range required - pass @c 1 * for any size * @param flags any extra flags to control the resource * allocation - see @c RF_XXX flags in * for details * * @returns the resource which was allocated or @c NULL if no * resource could be allocated */ struct resource * resource_list_alloc(struct resource_list *rl, device_t bus, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource_list_entry *rle = NULL; int passthrough = (device_get_parent(child) != bus); int isdefault = RMAN_IS_DEFAULT_RANGE(start, end); if (passthrough) { return (BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type, rid, start, end, count, flags)); } rle = resource_list_find(rl, type, *rid); if (!rle) return (NULL); /* no resource of that type/rid */ if (rle->res) { if (rle->flags & RLE_RESERVED) { if (rle->flags & RLE_ALLOCATED) return (NULL); if ((flags & RF_ACTIVE) && bus_activate_resource(child, type, *rid, rle->res) != 0) return (NULL); rle->flags |= RLE_ALLOCATED; return (rle->res); } device_printf(bus, "resource entry %#x type %d for child %s is busy\n", *rid, type, device_get_nameunit(child)); return (NULL); } if (isdefault) { start = rle->start; count = ulmax(count, rle->count); end = ulmax(rle->end, start + count - 1); } rle->res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type, rid, start, end, count, flags); /* * Record the new range. */ if (rle->res) { rle->start = rman_get_start(rle->res); rle->end = rman_get_end(rle->res); rle->count = count; } return (rle->res); } /** * @brief Helper function for implementing BUS_RELEASE_RESOURCE() * * Implement BUS_RELEASE_RESOURCE() using a resource list. Normally * used with resource_list_alloc(). * * @param rl the resource list which was allocated from * @param bus the parent device of @p child * @param child the device which is requesting a release * @param type the type of resource to release * @param rid the resource identifier * @param res the resource to release * * @retval 0 success * @retval non-zero a standard unix error code indicating what * error condition prevented the operation */ int resource_list_release(struct resource_list *rl, device_t bus, device_t child, int type, int rid, struct resource *res) { struct resource_list_entry *rle = NULL; int passthrough = (device_get_parent(child) != bus); int error; if (passthrough) { return (BUS_RELEASE_RESOURCE(device_get_parent(bus), child, type, rid, res)); } rle = resource_list_find(rl, type, rid); if (!rle) panic("resource_list_release: can't find resource"); if (!rle->res) panic("resource_list_release: resource entry is not busy"); if (rle->flags & RLE_RESERVED) { if (rle->flags & RLE_ALLOCATED) { if (rman_get_flags(res) & RF_ACTIVE) { error = bus_deactivate_resource(child, type, rid, res); if (error) return (error); } rle->flags &= ~RLE_ALLOCATED; return (0); } return (EINVAL); } error = BUS_RELEASE_RESOURCE(device_get_parent(bus), child, type, rid, res); if (error) return (error); rle->res = NULL; return (0); } /** * @brief Release all active resources of a given type * * Release all active resources of a specified type. This is intended * to be used to cleanup resources leaked by a driver after detach or * a failed attach. * * @param rl the resource list which was allocated from * @param bus the parent device of @p child * @param child the device whose active resources are being released * @param type the type of resources to release * * @retval 0 success * @retval EBUSY at least one resource was active */ int resource_list_release_active(struct resource_list *rl, device_t bus, device_t child, int type) { struct resource_list_entry *rle; int error, retval; retval = 0; STAILQ_FOREACH(rle, rl, link) { if (rle->type != type) continue; if (rle->res == NULL) continue; if ((rle->flags & (RLE_RESERVED | RLE_ALLOCATED)) == RLE_RESERVED) continue; retval = EBUSY; error = resource_list_release(rl, bus, child, type, rman_get_rid(rle->res), rle->res); if (error != 0) device_printf(bus, "Failed to release active resource: %d\n", error); } return (retval); } /** * @brief Fully release a reserved resource * * Fully releases a resource reserved via resource_list_reserve(). * * @param rl the resource list which was allocated from * @param bus the parent device of @p child * @param child the device whose reserved resource is being released * @param type the type of resource to release * @param rid the resource identifier * @param res the resource to release * * @retval 0 success * @retval non-zero a standard unix error code indicating what * error condition prevented the operation */ int resource_list_unreserve(struct resource_list *rl, device_t bus, device_t child, int type, int rid) { struct resource_list_entry *rle = NULL; int passthrough = (device_get_parent(child) != bus); if (passthrough) panic( "resource_list_unreserve() should only be called for direct children"); rle = resource_list_find(rl, type, rid); if (!rle) panic("resource_list_unreserve: can't find resource"); if (!(rle->flags & RLE_RESERVED)) return (EINVAL); if (rle->flags & RLE_ALLOCATED) return (EBUSY); rle->flags &= ~RLE_RESERVED; return (resource_list_release(rl, bus, child, type, rid, rle->res)); } /** * @brief Print a description of resources in a resource list * * Print all resources of a specified type, for use in BUS_PRINT_CHILD(). * The name is printed if at least one resource of the given type is available. * The format is used to print resource start and end. * * @param rl the resource list to print * @param name the name of @p type, e.g. @c "memory" * @param type type type of resource entry to print * @param format printf(9) format string to print resource * start and end values * * @returns the number of characters printed */ int resource_list_print_type(struct resource_list *rl, const char *name, int type, const char *format) { struct resource_list_entry *rle; int printed, retval; printed = 0; retval = 0; /* Yes, this is kinda cheating */ STAILQ_FOREACH(rle, rl, link) { if (rle->type == type) { if (printed == 0) retval += printf(" %s ", name); else retval += printf(","); printed++; retval += printf(format, rle->start); if (rle->count > 1) { retval += printf("-"); retval += printf(format, rle->start + rle->count - 1); } } } return (retval); } /** * @brief Releases all the resources in a list. * * @param rl The resource list to purge. * * @returns nothing */ void resource_list_purge(struct resource_list *rl) { struct resource_list_entry *rle; while ((rle = STAILQ_FIRST(rl)) != NULL) { if (rle->res) bus_release_resource(rman_get_device(rle->res), rle->type, rle->rid, rle->res); STAILQ_REMOVE_HEAD(rl, link); free(rle, M_BUS); } } device_t bus_generic_add_child(device_t dev, u_int order, const char *name, int unit) { return (device_add_child_ordered(dev, order, name, unit)); } /** * @brief Helper function for implementing DEVICE_PROBE() * * This function can be used to help implement the DEVICE_PROBE() for * a bus (i.e. a device which has other devices attached to it). It * calls the DEVICE_IDENTIFY() method of each driver in the device's * devclass. */ int bus_generic_probe(device_t dev) { devclass_t dc = dev->devclass; driverlink_t dl; TAILQ_FOREACH(dl, &dc->drivers, link) { /* * If this driver's pass is too high, then ignore it. * For most drivers in the default pass, this will * never be true. For early-pass drivers they will * only call the identify routines of eligible drivers * when this routine is called. Drivers for later * passes should have their identify routines called * on early-pass buses during BUS_NEW_PASS(). */ if (dl->pass > bus_current_pass) continue; DEVICE_IDENTIFY(dl->driver, dev); } return (0); } /** * @brief Helper function for implementing DEVICE_ATTACH() * * This function can be used to help implement the DEVICE_ATTACH() for * a bus. It calls device_probe_and_attach() for each of the device's * children. */ int bus_generic_attach(device_t dev) { device_t child; TAILQ_FOREACH(child, &dev->children, link) { device_probe_and_attach(child); } return (0); } /** * @brief Helper function for delaying attaching children * * Many buses can't run transactions on the bus which children need to probe and * attach until after interrupts and/or timers are running. This function * delays their attach until interrupts and timers are enabled. */ int bus_delayed_attach_children(device_t dev) { /* Probe and attach the bus children when interrupts are available */ config_intrhook_oneshot((ich_func_t)bus_generic_attach, dev); return (0); } /** * @brief Helper function for implementing DEVICE_DETACH() * * This function can be used to help implement the DEVICE_DETACH() for * a bus. It calls device_detach() for each of the device's * children. */ int bus_generic_detach(device_t dev) { device_t child; int error; if (dev->state != DS_ATTACHED) return (EBUSY); /* * Detach children in the reverse order. * See bus_generic_suspend for details. */ TAILQ_FOREACH_REVERSE(child, &dev->children, device_list, link) { if ((error = device_detach(child)) != 0) return (error); } return (0); } /** * @brief Helper function for implementing DEVICE_SHUTDOWN() * * This function can be used to help implement the DEVICE_SHUTDOWN() * for a bus. It calls device_shutdown() for each of the device's * children. */ int bus_generic_shutdown(device_t dev) { device_t child; /* * Shut down children in the reverse order. * See bus_generic_suspend for details. */ TAILQ_FOREACH_REVERSE(child, &dev->children, device_list, link) { device_shutdown(child); } return (0); } /** * @brief Default function for suspending a child device. * * This function is to be used by a bus's DEVICE_SUSPEND_CHILD(). */ int bus_generic_suspend_child(device_t dev, device_t child) { int error; error = DEVICE_SUSPEND(child); if (error == 0) child->flags |= DF_SUSPENDED; return (error); } /** * @brief Default function for resuming a child device. * * This function is to be used by a bus's DEVICE_RESUME_CHILD(). */ int bus_generic_resume_child(device_t dev, device_t child) { DEVICE_RESUME(child); child->flags &= ~DF_SUSPENDED; return (0); } /** * @brief Helper function for implementing DEVICE_SUSPEND() * * This function can be used to help implement the DEVICE_SUSPEND() * for a bus. It calls DEVICE_SUSPEND() for each of the device's * children. If any call to DEVICE_SUSPEND() fails, the suspend * operation is aborted and any devices which were suspended are * resumed immediately by calling their DEVICE_RESUME() methods. */ int bus_generic_suspend(device_t dev) { int error; device_t child; /* * Suspend children in the reverse order. * For most buses all children are equal, so the order does not matter. * Other buses, such as acpi, carefully order their child devices to * express implicit dependencies between them. For such buses it is * safer to bring down devices in the reverse order. */ TAILQ_FOREACH_REVERSE(child, &dev->children, device_list, link) { error = BUS_SUSPEND_CHILD(dev, child); if (error != 0) { child = TAILQ_NEXT(child, link); if (child != NULL) { TAILQ_FOREACH_FROM(child, &dev->children, link) BUS_RESUME_CHILD(dev, child); } return (error); } } return (0); } /** * @brief Helper function for implementing DEVICE_RESUME() * * This function can be used to help implement the DEVICE_RESUME() for * a bus. It calls DEVICE_RESUME() on each of the device's children. */ int bus_generic_resume(device_t dev) { device_t child; TAILQ_FOREACH(child, &dev->children, link) { BUS_RESUME_CHILD(dev, child); /* if resume fails, there's nothing we can usefully do... */ } return (0); } /** * @brief Helper function for implementing BUS_RESET_POST * * Bus can use this function to implement common operations of * re-attaching or resuming the children after the bus itself was * reset, and after restoring bus-unique state of children. * * @param dev The bus * #param flags DEVF_RESET_* */ int bus_helper_reset_post(device_t dev, int flags) { device_t child; int error, error1; error = 0; TAILQ_FOREACH(child, &dev->children,link) { BUS_RESET_POST(dev, child); error1 = (flags & DEVF_RESET_DETACH) != 0 ? device_probe_and_attach(child) : BUS_RESUME_CHILD(dev, child); if (error == 0 && error1 != 0) error = error1; } return (error); } static void bus_helper_reset_prepare_rollback(device_t dev, device_t child, int flags) { child = TAILQ_NEXT(child, link); if (child == NULL) return; TAILQ_FOREACH_FROM(child, &dev->children,link) { BUS_RESET_POST(dev, child); if ((flags & DEVF_RESET_DETACH) != 0) device_probe_and_attach(child); else BUS_RESUME_CHILD(dev, child); } } /** * @brief Helper function for implementing BUS_RESET_PREPARE * * Bus can use this function to implement common operations of * detaching or suspending the children before the bus itself is * reset, and then save bus-unique state of children that must * persists around reset. * * @param dev The bus * #param flags DEVF_RESET_* */ int bus_helper_reset_prepare(device_t dev, int flags) { device_t child; int error; if (dev->state != DS_ATTACHED) return (EBUSY); TAILQ_FOREACH_REVERSE(child, &dev->children, device_list, link) { if ((flags & DEVF_RESET_DETACH) != 0) { error = device_get_state(child) == DS_ATTACHED ? device_detach(child) : 0; } else { error = BUS_SUSPEND_CHILD(dev, child); } if (error == 0) { error = BUS_RESET_PREPARE(dev, child); if (error != 0) { if ((flags & DEVF_RESET_DETACH) != 0) device_probe_and_attach(child); else BUS_RESUME_CHILD(dev, child); } } if (error != 0) { bus_helper_reset_prepare_rollback(dev, child, flags); return (error); } } return (0); } /** * @brief Helper function for implementing BUS_PRINT_CHILD(). * * This function prints the first part of the ascii representation of * @p child, including its name, unit and description (if any - see * device_set_desc()). * * @returns the number of characters printed */ int bus_print_child_header(device_t dev, device_t child) { int retval = 0; if (device_get_desc(child)) { retval += device_printf(child, "<%s>", device_get_desc(child)); } else { retval += printf("%s", device_get_nameunit(child)); } return (retval); } /** * @brief Helper function for implementing BUS_PRINT_CHILD(). * * This function prints the last part of the ascii representation of * @p child, which consists of the string @c " on " followed by the * name and unit of the @p dev. * * @returns the number of characters printed */ int bus_print_child_footer(device_t dev, device_t child) { return (printf(" on %s\n", device_get_nameunit(dev))); } /** * @brief Helper function for implementing BUS_PRINT_CHILD(). * * This function prints out the VM domain for the given device. * * @returns the number of characters printed */ int bus_print_child_domain(device_t dev, device_t child) { int domain; /* No domain? Don't print anything */ if (BUS_GET_DOMAIN(dev, child, &domain) != 0) return (0); return (printf(" numa-domain %d", domain)); } /** * @brief Helper function for implementing BUS_PRINT_CHILD(). * * This function simply calls bus_print_child_header() followed by * bus_print_child_footer(). * * @returns the number of characters printed */ int bus_generic_print_child(device_t dev, device_t child) { int retval = 0; retval += bus_print_child_header(dev, child); retval += bus_print_child_domain(dev, child); retval += bus_print_child_footer(dev, child); return (retval); } /** * @brief Stub function for implementing BUS_READ_IVAR(). * * @returns ENOENT */ int bus_generic_read_ivar(device_t dev, device_t child, int index, uintptr_t * result) { return (ENOENT); } /** * @brief Stub function for implementing BUS_WRITE_IVAR(). * * @returns ENOENT */ int bus_generic_write_ivar(device_t dev, device_t child, int index, uintptr_t value) { return (ENOENT); } /** * @brief Stub function for implementing BUS_GET_RESOURCE_LIST(). * * @returns NULL */ struct resource_list * bus_generic_get_resource_list(device_t dev, device_t child) { return (NULL); } /** * @brief Helper function for implementing BUS_DRIVER_ADDED(). * * This implementation of BUS_DRIVER_ADDED() simply calls the driver's * DEVICE_IDENTIFY() method to allow it to add new children to the bus * and then calls device_probe_and_attach() for each unattached child. */ void bus_generic_driver_added(device_t dev, driver_t *driver) { device_t child; DEVICE_IDENTIFY(driver, dev); TAILQ_FOREACH(child, &dev->children, link) { if (child->state == DS_NOTPRESENT || (child->flags & DF_REBID)) device_probe_and_attach(child); } } /** * @brief Helper function for implementing BUS_NEW_PASS(). * * This implementing of BUS_NEW_PASS() first calls the identify * routines for any drivers that probe at the current pass. Then it * walks the list of devices for this bus. If a device is already * attached, then it calls BUS_NEW_PASS() on that device. If the * device is not already attached, it attempts to attach a driver to * it. */ void bus_generic_new_pass(device_t dev) { driverlink_t dl; devclass_t dc; device_t child; dc = dev->devclass; TAILQ_FOREACH(dl, &dc->drivers, link) { if (dl->pass == bus_current_pass) DEVICE_IDENTIFY(dl->driver, dev); } TAILQ_FOREACH(child, &dev->children, link) { if (child->state >= DS_ATTACHED) BUS_NEW_PASS(child); else if (child->state == DS_NOTPRESENT) device_probe_and_attach(child); } } /** * @brief Helper function for implementing BUS_SETUP_INTR(). * * This simple implementation of BUS_SETUP_INTR() simply calls the * BUS_SETUP_INTR() method of the parent of @p dev. */ int bus_generic_setup_intr(device_t dev, device_t child, struct resource *irq, int flags, driver_filter_t *filter, driver_intr_t *intr, void *arg, void **cookiep) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_SETUP_INTR(dev->parent, child, irq, flags, filter, intr, arg, cookiep)); return (EINVAL); } /** * @brief Helper function for implementing BUS_TEARDOWN_INTR(). * * This simple implementation of BUS_TEARDOWN_INTR() simply calls the * BUS_TEARDOWN_INTR() method of the parent of @p dev. */ int bus_generic_teardown_intr(device_t dev, device_t child, struct resource *irq, void *cookie) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_TEARDOWN_INTR(dev->parent, child, irq, cookie)); return (EINVAL); } /** * @brief Helper function for implementing BUS_SUSPEND_INTR(). * * This simple implementation of BUS_SUSPEND_INTR() simply calls the * BUS_SUSPEND_INTR() method of the parent of @p dev. */ int bus_generic_suspend_intr(device_t dev, device_t child, struct resource *irq) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_SUSPEND_INTR(dev->parent, child, irq)); return (EINVAL); } /** * @brief Helper function for implementing BUS_RESUME_INTR(). * * This simple implementation of BUS_RESUME_INTR() simply calls the * BUS_RESUME_INTR() method of the parent of @p dev. */ int bus_generic_resume_intr(device_t dev, device_t child, struct resource *irq) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_RESUME_INTR(dev->parent, child, irq)); return (EINVAL); } /** * @brief Helper function for implementing BUS_ADJUST_RESOURCE(). * * This simple implementation of BUS_ADJUST_RESOURCE() simply calls the * BUS_ADJUST_RESOURCE() method of the parent of @p dev. */ int bus_generic_adjust_resource(device_t dev, device_t child, int type, struct resource *r, rman_res_t start, rman_res_t end) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_ADJUST_RESOURCE(dev->parent, child, type, r, start, end)); return (EINVAL); } /** * @brief Helper function for implementing BUS_ALLOC_RESOURCE(). * * This simple implementation of BUS_ALLOC_RESOURCE() simply calls the * BUS_ALLOC_RESOURCE() method of the parent of @p dev. */ struct resource * bus_generic_alloc_resource(device_t dev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_ALLOC_RESOURCE(dev->parent, child, type, rid, start, end, count, flags)); return (NULL); } /** * @brief Helper function for implementing BUS_RELEASE_RESOURCE(). * * This simple implementation of BUS_RELEASE_RESOURCE() simply calls the * BUS_RELEASE_RESOURCE() method of the parent of @p dev. */ int bus_generic_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_RELEASE_RESOURCE(dev->parent, child, type, rid, r)); return (EINVAL); } /** * @brief Helper function for implementing BUS_ACTIVATE_RESOURCE(). * * This simple implementation of BUS_ACTIVATE_RESOURCE() simply calls the * BUS_ACTIVATE_RESOURCE() method of the parent of @p dev. */ int bus_generic_activate_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_ACTIVATE_RESOURCE(dev->parent, child, type, rid, r)); return (EINVAL); } /** * @brief Helper function for implementing BUS_DEACTIVATE_RESOURCE(). * * This simple implementation of BUS_DEACTIVATE_RESOURCE() simply calls the * BUS_DEACTIVATE_RESOURCE() method of the parent of @p dev. */ int bus_generic_deactivate_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_DEACTIVATE_RESOURCE(dev->parent, child, type, rid, r)); return (EINVAL); } /** * @brief Helper function for implementing BUS_MAP_RESOURCE(). * * This simple implementation of BUS_MAP_RESOURCE() simply calls the * BUS_MAP_RESOURCE() method of the parent of @p dev. */ int bus_generic_map_resource(device_t dev, device_t child, int type, struct resource *r, struct resource_map_request *args, struct resource_map *map) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_MAP_RESOURCE(dev->parent, child, type, r, args, map)); return (EINVAL); } /** * @brief Helper function for implementing BUS_UNMAP_RESOURCE(). * * This simple implementation of BUS_UNMAP_RESOURCE() simply calls the * BUS_UNMAP_RESOURCE() method of the parent of @p dev. */ int bus_generic_unmap_resource(device_t dev, device_t child, int type, struct resource *r, struct resource_map *map) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_UNMAP_RESOURCE(dev->parent, child, type, r, map)); return (EINVAL); } /** * @brief Helper function for implementing BUS_BIND_INTR(). * * This simple implementation of BUS_BIND_INTR() simply calls the * BUS_BIND_INTR() method of the parent of @p dev. */ int bus_generic_bind_intr(device_t dev, device_t child, struct resource *irq, int cpu) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_BIND_INTR(dev->parent, child, irq, cpu)); return (EINVAL); } /** * @brief Helper function for implementing BUS_CONFIG_INTR(). * * This simple implementation of BUS_CONFIG_INTR() simply calls the * BUS_CONFIG_INTR() method of the parent of @p dev. */ int bus_generic_config_intr(device_t dev, int irq, enum intr_trigger trig, enum intr_polarity pol) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_CONFIG_INTR(dev->parent, irq, trig, pol)); return (EINVAL); } /** * @brief Helper function for implementing BUS_DESCRIBE_INTR(). * * This simple implementation of BUS_DESCRIBE_INTR() simply calls the * BUS_DESCRIBE_INTR() method of the parent of @p dev. */ int bus_generic_describe_intr(device_t dev, device_t child, struct resource *irq, void *cookie, const char *descr) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent) return (BUS_DESCRIBE_INTR(dev->parent, child, irq, cookie, descr)); return (EINVAL); } /** * @brief Helper function for implementing BUS_GET_CPUS(). * * This simple implementation of BUS_GET_CPUS() simply calls the * BUS_GET_CPUS() method of the parent of @p dev. */ int bus_generic_get_cpus(device_t dev, device_t child, enum cpu_sets op, size_t setsize, cpuset_t *cpuset) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent != NULL) return (BUS_GET_CPUS(dev->parent, child, op, setsize, cpuset)); return (EINVAL); } /** * @brief Helper function for implementing BUS_GET_DMA_TAG(). * * This simple implementation of BUS_GET_DMA_TAG() simply calls the * BUS_GET_DMA_TAG() method of the parent of @p dev. */ bus_dma_tag_t bus_generic_get_dma_tag(device_t dev, device_t child) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent != NULL) return (BUS_GET_DMA_TAG(dev->parent, child)); return (NULL); } /** * @brief Helper function for implementing BUS_GET_BUS_TAG(). * * This simple implementation of BUS_GET_BUS_TAG() simply calls the * BUS_GET_BUS_TAG() method of the parent of @p dev. */ bus_space_tag_t bus_generic_get_bus_tag(device_t dev, device_t child) { /* Propagate up the bus hierarchy until someone handles it. */ if (dev->parent != NULL) return (BUS_GET_BUS_TAG(dev->parent, child)); return ((bus_space_tag_t)0); } /** * @brief Helper function for implementing BUS_GET_RESOURCE(). * * This implementation of BUS_GET_RESOURCE() uses the * resource_list_find() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list to * search. */ int bus_generic_rl_get_resource(device_t dev, device_t child, int type, int rid, rman_res_t *startp, rman_res_t *countp) { struct resource_list * rl = NULL; struct resource_list_entry * rle = NULL; rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return (EINVAL); rle = resource_list_find(rl, type, rid); if (!rle) return (ENOENT); if (startp) *startp = rle->start; if (countp) *countp = rle->count; return (0); } /** * @brief Helper function for implementing BUS_SET_RESOURCE(). * * This implementation of BUS_SET_RESOURCE() uses the * resource_list_add() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list to * edit. */ int bus_generic_rl_set_resource(device_t dev, device_t child, int type, int rid, rman_res_t start, rman_res_t count) { struct resource_list * rl = NULL; rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return (EINVAL); resource_list_add(rl, type, rid, start, (start + count - 1), count); return (0); } /** * @brief Helper function for implementing BUS_DELETE_RESOURCE(). * * This implementation of BUS_DELETE_RESOURCE() uses the * resource_list_delete() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list to * edit. */ void bus_generic_rl_delete_resource(device_t dev, device_t child, int type, int rid) { struct resource_list * rl = NULL; rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return; resource_list_delete(rl, type, rid); return; } /** * @brief Helper function for implementing BUS_RELEASE_RESOURCE(). * * This implementation of BUS_RELEASE_RESOURCE() uses the * resource_list_release() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list. */ int bus_generic_rl_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { struct resource_list * rl = NULL; if (device_get_parent(child) != dev) return (BUS_RELEASE_RESOURCE(device_get_parent(dev), child, type, rid, r)); rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return (EINVAL); return (resource_list_release(rl, dev, child, type, rid, r)); } /** * @brief Helper function for implementing BUS_ALLOC_RESOURCE(). * * This implementation of BUS_ALLOC_RESOURCE() uses the * resource_list_alloc() function to do most of the work. It calls * BUS_GET_RESOURCE_LIST() to find a suitable resource list. */ struct resource * bus_generic_rl_alloc_resource(device_t dev, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource_list * rl = NULL; if (device_get_parent(child) != dev) return (BUS_ALLOC_RESOURCE(device_get_parent(dev), child, type, rid, start, end, count, flags)); rl = BUS_GET_RESOURCE_LIST(dev, child); if (!rl) return (NULL); return (resource_list_alloc(rl, dev, child, type, rid, start, end, count, flags)); } /** * @brief Helper function for implementing BUS_CHILD_PRESENT(). * * This simple implementation of BUS_CHILD_PRESENT() simply calls the * BUS_CHILD_PRESENT() method of the parent of @p dev. */ int bus_generic_child_present(device_t dev, device_t child) { return (BUS_CHILD_PRESENT(device_get_parent(dev), dev)); } int bus_generic_get_domain(device_t dev, device_t child, int *domain) { if (dev->parent) return (BUS_GET_DOMAIN(dev->parent, dev, domain)); return (ENOENT); } /** * @brief Helper function for implementing BUS_RESCAN(). * * This null implementation of BUS_RESCAN() always fails to indicate * the bus does not support rescanning. */ int bus_null_rescan(device_t dev) { return (ENXIO); } /* * Some convenience functions to make it easier for drivers to use the * resource-management functions. All these really do is hide the * indirection through the parent's method table, making for slightly * less-wordy code. In the future, it might make sense for this code * to maintain some sort of a list of resources allocated by each device. */ int bus_alloc_resources(device_t dev, struct resource_spec *rs, struct resource **res) { int i; for (i = 0; rs[i].type != -1; i++) res[i] = NULL; for (i = 0; rs[i].type != -1; i++) { res[i] = bus_alloc_resource_any(dev, rs[i].type, &rs[i].rid, rs[i].flags); if (res[i] == NULL && !(rs[i].flags & RF_OPTIONAL)) { bus_release_resources(dev, rs, res); return (ENXIO); } } return (0); } void bus_release_resources(device_t dev, const struct resource_spec *rs, struct resource **res) { int i; for (i = 0; rs[i].type != -1; i++) if (res[i] != NULL) { bus_release_resource( dev, rs[i].type, rs[i].rid, res[i]); res[i] = NULL; } } /** * @brief Wrapper function for BUS_ALLOC_RESOURCE(). * * This function simply calls the BUS_ALLOC_RESOURCE() method of the * parent of @p dev. */ struct resource * bus_alloc_resource(device_t dev, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct resource *res; if (dev->parent == NULL) return (NULL); res = BUS_ALLOC_RESOURCE(dev->parent, dev, type, rid, start, end, count, flags); return (res); } /** * @brief Wrapper function for BUS_ADJUST_RESOURCE(). * * This function simply calls the BUS_ADJUST_RESOURCE() method of the * parent of @p dev. */ int bus_adjust_resource(device_t dev, int type, struct resource *r, rman_res_t start, rman_res_t end) { if (dev->parent == NULL) return (EINVAL); return (BUS_ADJUST_RESOURCE(dev->parent, dev, type, r, start, end)); } /** * @brief Wrapper function for BUS_ACTIVATE_RESOURCE(). * * This function simply calls the BUS_ACTIVATE_RESOURCE() method of the * parent of @p dev. */ int bus_activate_resource(device_t dev, int type, int rid, struct resource *r) { if (dev->parent == NULL) return (EINVAL); return (BUS_ACTIVATE_RESOURCE(dev->parent, dev, type, rid, r)); } /** * @brief Wrapper function for BUS_DEACTIVATE_RESOURCE(). * * This function simply calls the BUS_DEACTIVATE_RESOURCE() method of the * parent of @p dev. */ int bus_deactivate_resource(device_t dev, int type, int rid, struct resource *r) { if (dev->parent == NULL) return (EINVAL); return (BUS_DEACTIVATE_RESOURCE(dev->parent, dev, type, rid, r)); } /** * @brief Wrapper function for BUS_MAP_RESOURCE(). * * This function simply calls the BUS_MAP_RESOURCE() method of the * parent of @p dev. */ int bus_map_resource(device_t dev, int type, struct resource *r, struct resource_map_request *args, struct resource_map *map) { if (dev->parent == NULL) return (EINVAL); return (BUS_MAP_RESOURCE(dev->parent, dev, type, r, args, map)); } /** * @brief Wrapper function for BUS_UNMAP_RESOURCE(). * * This function simply calls the BUS_UNMAP_RESOURCE() method of the * parent of @p dev. */ int bus_unmap_resource(device_t dev, int type, struct resource *r, struct resource_map *map) { if (dev->parent == NULL) return (EINVAL); return (BUS_UNMAP_RESOURCE(dev->parent, dev, type, r, map)); } /** * @brief Wrapper function for BUS_RELEASE_RESOURCE(). * * This function simply calls the BUS_RELEASE_RESOURCE() method of the * parent of @p dev. */ int bus_release_resource(device_t dev, int type, int rid, struct resource *r) { int rv; if (dev->parent == NULL) return (EINVAL); rv = BUS_RELEASE_RESOURCE(dev->parent, dev, type, rid, r); return (rv); } /** * @brief Wrapper function for BUS_SETUP_INTR(). * * This function simply calls the BUS_SETUP_INTR() method of the * parent of @p dev. */ int bus_setup_intr(device_t dev, struct resource *r, int flags, driver_filter_t filter, driver_intr_t handler, void *arg, void **cookiep) { int error; if (dev->parent == NULL) return (EINVAL); error = BUS_SETUP_INTR(dev->parent, dev, r, flags, filter, handler, arg, cookiep); if (error != 0) return (error); if (handler != NULL && !(flags & INTR_MPSAFE)) device_printf(dev, "[GIANT-LOCKED]\n"); return (0); } /** * @brief Wrapper function for BUS_TEARDOWN_INTR(). * * This function simply calls the BUS_TEARDOWN_INTR() method of the * parent of @p dev. */ int bus_teardown_intr(device_t dev, struct resource *r, void *cookie) { if (dev->parent == NULL) return (EINVAL); return (BUS_TEARDOWN_INTR(dev->parent, dev, r, cookie)); } /** * @brief Wrapper function for BUS_SUSPEND_INTR(). * * This function simply calls the BUS_SUSPEND_INTR() method of the * parent of @p dev. */ int bus_suspend_intr(device_t dev, struct resource *r) { if (dev->parent == NULL) return (EINVAL); return (BUS_SUSPEND_INTR(dev->parent, dev, r)); } /** * @brief Wrapper function for BUS_RESUME_INTR(). * * This function simply calls the BUS_RESUME_INTR() method of the * parent of @p dev. */ int bus_resume_intr(device_t dev, struct resource *r) { if (dev->parent == NULL) return (EINVAL); return (BUS_RESUME_INTR(dev->parent, dev, r)); } /** * @brief Wrapper function for BUS_BIND_INTR(). * * This function simply calls the BUS_BIND_INTR() method of the * parent of @p dev. */ int bus_bind_intr(device_t dev, struct resource *r, int cpu) { if (dev->parent == NULL) return (EINVAL); return (BUS_BIND_INTR(dev->parent, dev, r, cpu)); } /** * @brief Wrapper function for BUS_DESCRIBE_INTR(). * * This function first formats the requested description into a * temporary buffer and then calls the BUS_DESCRIBE_INTR() method of * the parent of @p dev. */ int bus_describe_intr(device_t dev, struct resource *irq, void *cookie, const char *fmt, ...) { va_list ap; char descr[MAXCOMLEN + 1]; if (dev->parent == NULL) return (EINVAL); va_start(ap, fmt); vsnprintf(descr, sizeof(descr), fmt, ap); va_end(ap); return (BUS_DESCRIBE_INTR(dev->parent, dev, irq, cookie, descr)); } /** * @brief Wrapper function for BUS_SET_RESOURCE(). * * This function simply calls the BUS_SET_RESOURCE() method of the * parent of @p dev. */ int bus_set_resource(device_t dev, int type, int rid, rman_res_t start, rman_res_t count) { return (BUS_SET_RESOURCE(device_get_parent(dev), dev, type, rid, start, count)); } /** * @brief Wrapper function for BUS_GET_RESOURCE(). * * This function simply calls the BUS_GET_RESOURCE() method of the * parent of @p dev. */ int bus_get_resource(device_t dev, int type, int rid, rman_res_t *startp, rman_res_t *countp) { return (BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid, startp, countp)); } /** * @brief Wrapper function for BUS_GET_RESOURCE(). * * This function simply calls the BUS_GET_RESOURCE() method of the * parent of @p dev and returns the start value. */ rman_res_t bus_get_resource_start(device_t dev, int type, int rid) { rman_res_t start; rman_res_t count; int error; error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid, &start, &count); if (error) return (0); return (start); } /** * @brief Wrapper function for BUS_GET_RESOURCE(). * * This function simply calls the BUS_GET_RESOURCE() method of the * parent of @p dev and returns the count value. */ rman_res_t bus_get_resource_count(device_t dev, int type, int rid) { rman_res_t start; rman_res_t count; int error; error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid, &start, &count); if (error) return (0); return (count); } /** * @brief Wrapper function for BUS_DELETE_RESOURCE(). * * This function simply calls the BUS_DELETE_RESOURCE() method of the * parent of @p dev. */ void bus_delete_resource(device_t dev, int type, int rid) { BUS_DELETE_RESOURCE(device_get_parent(dev), dev, type, rid); } /** * @brief Wrapper function for BUS_CHILD_PRESENT(). * * This function simply calls the BUS_CHILD_PRESENT() method of the * parent of @p dev. */ int bus_child_present(device_t child) { return (BUS_CHILD_PRESENT(device_get_parent(child), child)); } /** * @brief Wrapper function for BUS_CHILD_PNPINFO_STR(). * * This function simply calls the BUS_CHILD_PNPINFO_STR() method of the * parent of @p dev. */ int bus_child_pnpinfo_str(device_t child, char *buf, size_t buflen) { device_t parent; parent = device_get_parent(child); if (parent == NULL) { *buf = '\0'; return (0); } return (BUS_CHILD_PNPINFO_STR(parent, child, buf, buflen)); } /** * @brief Wrapper function for BUS_CHILD_LOCATION_STR(). * * This function simply calls the BUS_CHILD_LOCATION_STR() method of the * parent of @p dev. */ int bus_child_location_str(device_t child, char *buf, size_t buflen) { device_t parent; parent = device_get_parent(child); if (parent == NULL) { *buf = '\0'; return (0); } return (BUS_CHILD_LOCATION_STR(parent, child, buf, buflen)); } /** * @brief Wrapper function for BUS_GET_CPUS(). * * This function simply calls the BUS_GET_CPUS() method of the * parent of @p dev. */ int bus_get_cpus(device_t dev, enum cpu_sets op, size_t setsize, cpuset_t *cpuset) { device_t parent; parent = device_get_parent(dev); if (parent == NULL) return (EINVAL); return (BUS_GET_CPUS(parent, dev, op, setsize, cpuset)); } /** * @brief Wrapper function for BUS_GET_DMA_TAG(). * * This function simply calls the BUS_GET_DMA_TAG() method of the * parent of @p dev. */ bus_dma_tag_t bus_get_dma_tag(device_t dev) { device_t parent; parent = device_get_parent(dev); if (parent == NULL) return (NULL); return (BUS_GET_DMA_TAG(parent, dev)); } /** * @brief Wrapper function for BUS_GET_BUS_TAG(). * * This function simply calls the BUS_GET_BUS_TAG() method of the * parent of @p dev. */ bus_space_tag_t bus_get_bus_tag(device_t dev) { device_t parent; parent = device_get_parent(dev); if (parent == NULL) return ((bus_space_tag_t)0); return (BUS_GET_BUS_TAG(parent, dev)); } /** * @brief Wrapper function for BUS_GET_DOMAIN(). * * This function simply calls the BUS_GET_DOMAIN() method of the * parent of @p dev. */ int bus_get_domain(device_t dev, int *domain) { return (BUS_GET_DOMAIN(device_get_parent(dev), dev, domain)); } /* Resume all devices and then notify userland that we're up again. */ static int root_resume(device_t dev) { int error; error = bus_generic_resume(dev); - if (error == 0) - devctl_notify("kern", "power", "resume", NULL); + if (error == 0) { + devctl_notify("kern", "power", "resume", NULL); /* Deprecated gone in 14 */ + devctl_notify("kernel", "power", "resume", NULL); + } return (error); } static int root_print_child(device_t dev, device_t child) { int retval = 0; retval += bus_print_child_header(dev, child); retval += printf("\n"); return (retval); } static int root_setup_intr(device_t dev, device_t child, struct resource *irq, int flags, driver_filter_t *filter, driver_intr_t *intr, void *arg, void **cookiep) { /* * If an interrupt mapping gets to here something bad has happened. */ panic("root_setup_intr"); } /* * If we get here, assume that the device is permanent and really is * present in the system. Removable bus drivers are expected to intercept * this call long before it gets here. We return -1 so that drivers that * really care can check vs -1 or some ERRNO returned higher in the food * chain. */ static int root_child_present(device_t dev, device_t child) { return (-1); } static int root_get_cpus(device_t dev, device_t child, enum cpu_sets op, size_t setsize, cpuset_t *cpuset) { switch (op) { case INTR_CPUS: /* Default to returning the set of all CPUs. */ if (setsize != sizeof(cpuset_t)) return (EINVAL); *cpuset = all_cpus; return (0); default: return (EINVAL); } } static kobj_method_t root_methods[] = { /* Device interface */ KOBJMETHOD(device_shutdown, bus_generic_shutdown), KOBJMETHOD(device_suspend, bus_generic_suspend), KOBJMETHOD(device_resume, root_resume), /* Bus interface */ KOBJMETHOD(bus_print_child, root_print_child), KOBJMETHOD(bus_read_ivar, bus_generic_read_ivar), KOBJMETHOD(bus_write_ivar, bus_generic_write_ivar), KOBJMETHOD(bus_setup_intr, root_setup_intr), KOBJMETHOD(bus_child_present, root_child_present), KOBJMETHOD(bus_get_cpus, root_get_cpus), KOBJMETHOD_END }; static driver_t root_driver = { "root", root_methods, 1, /* no softc */ }; device_t root_bus; devclass_t root_devclass; static int root_bus_module_handler(module_t mod, int what, void* arg) { switch (what) { case MOD_LOAD: TAILQ_INIT(&bus_data_devices); kobj_class_compile((kobj_class_t) &root_driver); root_bus = make_device(NULL, "root", 0); root_bus->desc = "System root bus"; kobj_init((kobj_t) root_bus, (kobj_class_t) &root_driver); root_bus->driver = &root_driver; root_bus->state = DS_ATTACHED; root_devclass = devclass_find_internal("root", NULL, FALSE); devinit(); return (0); case MOD_SHUTDOWN: device_shutdown(root_bus); return (0); default: return (EOPNOTSUPP); } return (0); } static moduledata_t root_bus_mod = { "rootbus", root_bus_module_handler, NULL }; DECLARE_MODULE(rootbus, root_bus_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); /** * @brief Automatically configure devices * * This function begins the autoconfiguration process by calling * device_probe_and_attach() for each child of the @c root0 device. */ void root_bus_configure(void) { PDEBUG((".")); /* Eventually this will be split up, but this is sufficient for now. */ bus_set_pass(BUS_PASS_DEFAULT); } /** * @brief Module handler for registering device drivers * * This module handler is used to automatically register device * drivers when modules are loaded. If @p what is MOD_LOAD, it calls * devclass_add_driver() for the driver described by the * driver_module_data structure pointed to by @p arg */ int driver_module_handler(module_t mod, int what, void *arg) { struct driver_module_data *dmd; devclass_t bus_devclass; kobj_class_t driver; int error, pass; dmd = (struct driver_module_data *)arg; bus_devclass = devclass_find_internal(dmd->dmd_busname, NULL, TRUE); error = 0; switch (what) { case MOD_LOAD: if (dmd->dmd_chainevh) error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg); pass = dmd->dmd_pass; driver = dmd->dmd_driver; PDEBUG(("Loading module: driver %s on bus %s (pass %d)", DRIVERNAME(driver), dmd->dmd_busname, pass)); error = devclass_add_driver(bus_devclass, driver, pass, dmd->dmd_devclass); break; case MOD_UNLOAD: PDEBUG(("Unloading module: driver %s from bus %s", DRIVERNAME(dmd->dmd_driver), dmd->dmd_busname)); error = devclass_delete_driver(bus_devclass, dmd->dmd_driver); if (!error && dmd->dmd_chainevh) error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg); break; case MOD_QUIESCE: PDEBUG(("Quiesce module: driver %s from bus %s", DRIVERNAME(dmd->dmd_driver), dmd->dmd_busname)); error = devclass_quiesce_driver(bus_devclass, dmd->dmd_driver); if (!error && dmd->dmd_chainevh) error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg); break; default: error = EOPNOTSUPP; break; } return (error); } /** * @brief Enumerate all hinted devices for this bus. * * Walks through the hints for this bus and calls the bus_hinted_child * routine for each one it fines. It searches first for the specific * bus that's being probed for hinted children (eg isa0), and then for * generic children (eg isa). * * @param dev bus device to enumerate */ void bus_enumerate_hinted_children(device_t bus) { int i; const char *dname, *busname; int dunit; /* * enumerate all devices on the specific bus */ busname = device_get_nameunit(bus); i = 0; while (resource_find_match(&i, &dname, &dunit, "at", busname) == 0) BUS_HINTED_CHILD(bus, dname, dunit); /* * and all the generic ones. */ busname = device_get_name(bus); i = 0; while (resource_find_match(&i, &dname, &dunit, "at", busname) == 0) BUS_HINTED_CHILD(bus, dname, dunit); } #ifdef BUS_DEBUG /* the _short versions avoid iteration by not calling anything that prints * more than oneliners. I love oneliners. */ static void print_device_short(device_t dev, int indent) { if (!dev) return; indentprintf(("device %d: <%s> %sparent,%schildren,%s%s%s%s%s%s,%sivars,%ssoftc,busy=%d\n", dev->unit, dev->desc, (dev->parent? "":"no "), (TAILQ_EMPTY(&dev->children)? "no ":""), (dev->flags&DF_ENABLED? "enabled,":"disabled,"), (dev->flags&DF_FIXEDCLASS? "fixed,":""), (dev->flags&DF_WILDCARD? "wildcard,":""), (dev->flags&DF_DESCMALLOCED? "descmalloced,":""), (dev->flags&DF_REBID? "rebiddable,":""), (dev->flags&DF_SUSPENDED? "suspended,":""), (dev->ivars? "":"no "), (dev->softc? "":"no "), dev->busy)); } static void print_device(device_t dev, int indent) { if (!dev) return; print_device_short(dev, indent); indentprintf(("Parent:\n")); print_device_short(dev->parent, indent+1); indentprintf(("Driver:\n")); print_driver_short(dev->driver, indent+1); indentprintf(("Devclass:\n")); print_devclass_short(dev->devclass, indent+1); } void print_device_tree_short(device_t dev, int indent) /* print the device and all its children (indented) */ { device_t child; if (!dev) return; print_device_short(dev, indent); TAILQ_FOREACH(child, &dev->children, link) { print_device_tree_short(child, indent+1); } } void print_device_tree(device_t dev, int indent) /* print the device and all its children (indented) */ { device_t child; if (!dev) return; print_device(dev, indent); TAILQ_FOREACH(child, &dev->children, link) { print_device_tree(child, indent+1); } } static void print_driver_short(driver_t *driver, int indent) { if (!driver) return; indentprintf(("driver %s: softc size = %zd\n", driver->name, driver->size)); } static void print_driver(driver_t *driver, int indent) { if (!driver) return; print_driver_short(driver, indent); } static void print_driver_list(driver_list_t drivers, int indent) { driverlink_t driver; TAILQ_FOREACH(driver, &drivers, link) { print_driver(driver->driver, indent); } } static void print_devclass_short(devclass_t dc, int indent) { if ( !dc ) return; indentprintf(("devclass %s: max units = %d\n", dc->name, dc->maxunit)); } static void print_devclass(devclass_t dc, int indent) { int i; if ( !dc ) return; print_devclass_short(dc, indent); indentprintf(("Drivers:\n")); print_driver_list(dc->drivers, indent+1); indentprintf(("Devices:\n")); for (i = 0; i < dc->maxunit; i++) if (dc->devices[i]) print_device(dc->devices[i], indent+1); } void print_devclass_list_short(void) { devclass_t dc; printf("Short listing of devclasses, drivers & devices:\n"); TAILQ_FOREACH(dc, &devclasses, link) { print_devclass_short(dc, 0); } } void print_devclass_list(void) { devclass_t dc; printf("Full listing of devclasses, drivers & devices:\n"); TAILQ_FOREACH(dc, &devclasses, link) { print_devclass(dc, 0); } } #endif /* * User-space access to the device tree. * * We implement a small set of nodes: * * hw.bus Single integer read method to obtain the * current generation count. * hw.bus.devices Reads the entire device tree in flat space. * hw.bus.rman Resource manager interface * * We might like to add the ability to scan devclasses and/or drivers to * determine what else is currently loaded/available. */ static int sysctl_bus_info(SYSCTL_HANDLER_ARGS) { struct u_businfo ubus; ubus.ub_version = BUS_USER_VERSION; ubus.ub_generation = bus_data_generation; return (SYSCTL_OUT(req, &ubus, sizeof(ubus))); } SYSCTL_PROC(_hw_bus, OID_AUTO, info, CTLTYPE_STRUCT | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, sysctl_bus_info, "S,u_businfo", "bus-related data"); static int sysctl_devices(SYSCTL_HANDLER_ARGS) { int *name = (int *)arg1; u_int namelen = arg2; int index; device_t dev; struct u_device *udev; int error; char *walker, *ep; if (namelen != 2) return (EINVAL); if (bus_data_generation_check(name[0])) return (EINVAL); index = name[1]; /* * Scan the list of devices, looking for the requested index. */ TAILQ_FOREACH(dev, &bus_data_devices, devlink) { if (index-- == 0) break; } if (dev == NULL) return (ENOENT); /* * Populate the return item, careful not to overflow the buffer. */ udev = malloc(sizeof(*udev), M_BUS, M_WAITOK | M_ZERO); if (udev == NULL) return (ENOMEM); udev->dv_handle = (uintptr_t)dev; udev->dv_parent = (uintptr_t)dev->parent; udev->dv_devflags = dev->devflags; udev->dv_flags = dev->flags; udev->dv_state = dev->state; walker = udev->dv_fields; ep = walker + sizeof(udev->dv_fields); #define CP(src) \ if ((src) == NULL) \ *walker++ = '\0'; \ else { \ strlcpy(walker, (src), ep - walker); \ walker += strlen(walker) + 1; \ } \ if (walker >= ep) \ break; do { CP(dev->nameunit); CP(dev->desc); CP(dev->driver != NULL ? dev->driver->name : NULL); bus_child_pnpinfo_str(dev, walker, ep - walker); walker += strlen(walker) + 1; if (walker >= ep) break; bus_child_location_str(dev, walker, ep - walker); walker += strlen(walker) + 1; if (walker >= ep) break; *walker++ = '\0'; } while (0); #undef CP error = SYSCTL_OUT(req, udev, sizeof(*udev)); free(udev, M_BUS); return (error); } SYSCTL_NODE(_hw_bus, OID_AUTO, devices, CTLFLAG_RD | CTLFLAG_NEEDGIANT, sysctl_devices, "system device tree"); int bus_data_generation_check(int generation) { if (generation != bus_data_generation) return (1); /* XXX generate optimised lists here? */ return (0); } void bus_data_generation_update(void) { atomic_add_int(&bus_data_generation, 1); } int bus_free_resource(device_t dev, int type, struct resource *r) { if (r == NULL) return (0); return (bus_release_resource(dev, type, rman_get_rid(r), r)); } device_t device_lookup_by_name(const char *name) { device_t dev; TAILQ_FOREACH(dev, &bus_data_devices, devlink) { if (dev->nameunit != NULL && strcmp(dev->nameunit, name) == 0) return (dev); } return (NULL); } /* * /dev/devctl2 implementation. The existing /dev/devctl device has * implicit semantics on open, so it could not be reused for this. * Another option would be to call this /dev/bus? */ static int find_device(struct devreq *req, device_t *devp) { device_t dev; /* * First, ensure that the name is nul terminated. */ if (memchr(req->dr_name, '\0', sizeof(req->dr_name)) == NULL) return (EINVAL); /* * Second, try to find an attached device whose name matches * 'name'. */ dev = device_lookup_by_name(req->dr_name); if (dev != NULL) { *devp = dev; return (0); } /* Finally, give device enumerators a chance. */ dev = NULL; EVENTHANDLER_DIRECT_INVOKE(dev_lookup, req->dr_name, &dev); if (dev == NULL) return (ENOENT); *devp = dev; return (0); } static bool driver_exists(device_t bus, const char *driver) { devclass_t dc; for (dc = bus->devclass; dc != NULL; dc = dc->parent) { if (devclass_find_driver_internal(dc, driver) != NULL) return (true); } return (false); } static void device_gen_nomatch(device_t dev) { device_t child; if (dev->flags & DF_NEEDNOMATCH && dev->state == DS_NOTPRESENT) { BUS_PROBE_NOMATCH(dev->parent, dev); devnomatch(dev); dev->flags |= DF_DONENOMATCH; } dev->flags &= ~DF_NEEDNOMATCH; TAILQ_FOREACH(child, &dev->children, link) { device_gen_nomatch(child); } } static void device_do_deferred_actions(void) { devclass_t dc; driverlink_t dl; /* * Walk through the devclasses to find all the drivers we've tagged as * deferred during the freeze and call the driver added routines. They * have already been added to the lists in the background, so the driver * added routines that trigger a probe will have all the right bidders * for the probe auction. */ TAILQ_FOREACH(dc, &devclasses, link) { TAILQ_FOREACH(dl, &dc->drivers, link) { if (dl->flags & DL_DEFERRED_PROBE) { devclass_driver_added(dc, dl->driver); dl->flags &= ~DL_DEFERRED_PROBE; } } } /* * We also defer no-match events during a freeze. Walk the tree and * generate all the pent-up events that are still relevant. */ device_gen_nomatch(root_bus); bus_data_generation_update(); } static int devctl2_ioctl(struct cdev *cdev, u_long cmd, caddr_t data, int fflag, struct thread *td) { struct devreq *req; device_t dev; int error, old; /* Locate the device to control. */ mtx_lock(&Giant); req = (struct devreq *)data; switch (cmd) { case DEV_ATTACH: case DEV_DETACH: case DEV_ENABLE: case DEV_DISABLE: case DEV_SUSPEND: case DEV_RESUME: case DEV_SET_DRIVER: case DEV_CLEAR_DRIVER: case DEV_RESCAN: case DEV_DELETE: case DEV_RESET: error = priv_check(td, PRIV_DRIVER); if (error == 0) error = find_device(req, &dev); break; case DEV_FREEZE: case DEV_THAW: error = priv_check(td, PRIV_DRIVER); break; default: error = ENOTTY; break; } if (error) { mtx_unlock(&Giant); return (error); } /* Perform the requested operation. */ switch (cmd) { case DEV_ATTACH: if (device_is_attached(dev) && (dev->flags & DF_REBID) == 0) error = EBUSY; else if (!device_is_enabled(dev)) error = ENXIO; else error = device_probe_and_attach(dev); break; case DEV_DETACH: if (!device_is_attached(dev)) { error = ENXIO; break; } if (!(req->dr_flags & DEVF_FORCE_DETACH)) { error = device_quiesce(dev); if (error) break; } error = device_detach(dev); break; case DEV_ENABLE: if (device_is_enabled(dev)) { error = EBUSY; break; } /* * If the device has been probed but not attached (e.g. * when it has been disabled by a loader hint), just * attach the device rather than doing a full probe. */ device_enable(dev); if (device_is_alive(dev)) { /* * If the device was disabled via a hint, clear * the hint. */ if (resource_disabled(dev->driver->name, dev->unit)) resource_unset_value(dev->driver->name, dev->unit, "disabled"); error = device_attach(dev); } else error = device_probe_and_attach(dev); break; case DEV_DISABLE: if (!device_is_enabled(dev)) { error = ENXIO; break; } if (!(req->dr_flags & DEVF_FORCE_DETACH)) { error = device_quiesce(dev); if (error) break; } /* * Force DF_FIXEDCLASS on around detach to preserve * the existing name. */ old = dev->flags; dev->flags |= DF_FIXEDCLASS; error = device_detach(dev); if (!(old & DF_FIXEDCLASS)) dev->flags &= ~DF_FIXEDCLASS; if (error == 0) device_disable(dev); break; case DEV_SUSPEND: if (device_is_suspended(dev)) { error = EBUSY; break; } if (device_get_parent(dev) == NULL) { error = EINVAL; break; } error = BUS_SUSPEND_CHILD(device_get_parent(dev), dev); break; case DEV_RESUME: if (!device_is_suspended(dev)) { error = EINVAL; break; } if (device_get_parent(dev) == NULL) { error = EINVAL; break; } error = BUS_RESUME_CHILD(device_get_parent(dev), dev); break; case DEV_SET_DRIVER: { devclass_t dc; char driver[128]; error = copyinstr(req->dr_data, driver, sizeof(driver), NULL); if (error) break; if (driver[0] == '\0') { error = EINVAL; break; } if (dev->devclass != NULL && strcmp(driver, dev->devclass->name) == 0) /* XXX: Could possibly force DF_FIXEDCLASS on? */ break; /* * Scan drivers for this device's bus looking for at * least one matching driver. */ if (dev->parent == NULL) { error = EINVAL; break; } if (!driver_exists(dev->parent, driver)) { error = ENOENT; break; } dc = devclass_create(driver); if (dc == NULL) { error = ENOMEM; break; } /* Detach device if necessary. */ if (device_is_attached(dev)) { if (req->dr_flags & DEVF_SET_DRIVER_DETACH) error = device_detach(dev); else error = EBUSY; if (error) break; } /* Clear any previously-fixed device class and unit. */ if (dev->flags & DF_FIXEDCLASS) devclass_delete_device(dev->devclass, dev); dev->flags |= DF_WILDCARD; dev->unit = -1; /* Force the new device class. */ error = devclass_add_device(dc, dev); if (error) break; dev->flags |= DF_FIXEDCLASS; error = device_probe_and_attach(dev); break; } case DEV_CLEAR_DRIVER: if (!(dev->flags & DF_FIXEDCLASS)) { error = 0; break; } if (device_is_attached(dev)) { if (req->dr_flags & DEVF_CLEAR_DRIVER_DETACH) error = device_detach(dev); else error = EBUSY; if (error) break; } dev->flags &= ~DF_FIXEDCLASS; dev->flags |= DF_WILDCARD; devclass_delete_device(dev->devclass, dev); error = device_probe_and_attach(dev); break; case DEV_RESCAN: if (!device_is_attached(dev)) { error = ENXIO; break; } error = BUS_RESCAN(dev); break; case DEV_DELETE: { device_t parent; parent = device_get_parent(dev); if (parent == NULL) { error = EINVAL; break; } if (!(req->dr_flags & DEVF_FORCE_DELETE)) { if (bus_child_present(dev) != 0) { error = EBUSY; break; } } error = device_delete_child(parent, dev); break; } case DEV_FREEZE: if (device_frozen) error = EBUSY; else device_frozen = true; break; case DEV_THAW: if (!device_frozen) error = EBUSY; else { device_do_deferred_actions(); device_frozen = false; } break; case DEV_RESET: if ((req->dr_flags & ~(DEVF_RESET_DETACH)) != 0) { error = EINVAL; break; } error = BUS_RESET_CHILD(device_get_parent(dev), dev, req->dr_flags); break; } mtx_unlock(&Giant); return (error); } static struct cdevsw devctl2_cdevsw = { .d_version = D_VERSION, .d_ioctl = devctl2_ioctl, .d_name = "devctl2", }; static void devctl2_init(void) { make_dev_credf(MAKEDEV_ETERNAL, &devctl2_cdevsw, 0, NULL, UID_ROOT, GID_WHEEL, 0600, "devctl2"); } /* * APIs to manage deprecation and obsolescence. */ static int obsolete_panic = 0; SYSCTL_INT(_debug, OID_AUTO, obsolete_panic, CTLFLAG_RWTUN, &obsolete_panic, 0, "Panic when obsolete features are used (0 = never, 1 = if osbolete, " "2 = if deprecated)"); static void gone_panic(int major, int running, const char *msg) { switch (obsolete_panic) { case 0: return; case 1: if (running < major) return; /* FALLTHROUGH */ default: panic("%s", msg); } } void _gone_in(int major, const char *msg) { gone_panic(major, P_OSREL_MAJOR(__FreeBSD_version), msg); if (P_OSREL_MAJOR(__FreeBSD_version) >= major) printf("Obsolete code will be removed soon: %s\n", msg); else printf("Deprecated code (to be removed in FreeBSD %d): %s\n", major, msg); } void _gone_in_dev(device_t dev, int major, const char *msg) { gone_panic(major, P_OSREL_MAJOR(__FreeBSD_version), msg); if (P_OSREL_MAJOR(__FreeBSD_version) >= major) device_printf(dev, "Obsolete code will be removed soon: %s\n", msg); else device_printf(dev, "Deprecated code (to be removed in FreeBSD %d): %s\n", major, msg); } #ifdef DDB DB_SHOW_COMMAND(device, db_show_device) { device_t dev; if (!have_addr) return; dev = (device_t)addr; db_printf("name: %s\n", device_get_nameunit(dev)); db_printf(" driver: %s\n", DRIVERNAME(dev->driver)); db_printf(" class: %s\n", DEVCLANAME(dev->devclass)); db_printf(" addr: %p\n", dev); db_printf(" parent: %p\n", dev->parent); db_printf(" softc: %p\n", dev->softc); db_printf(" ivars: %p\n", dev->ivars); } DB_SHOW_ALL_COMMAND(devices, db_show_all_devices) { device_t dev; TAILQ_FOREACH(dev, &bus_data_devices, devlink) { db_show_device((db_expr_t)dev, true, count, modif); } } #endif