Index: head/stand/defaults/loader.conf
===================================================================
--- head/stand/defaults/loader.conf	(revision 363062)
+++ head/stand/defaults/loader.conf	(revision 363063)
@@ -1,176 +1,176 @@
 # This is loader.conf - a file full of useful variables that you can
 # set to change the default load behavior of your system. You should
 # not edit this file!  Put any overrides into one of the
 # loader_conf_files instead and you will be able to update these
 # defaults later without spamming your local configuration information.
 #
 # All arguments must be in double quotes.
 #
 # $FreeBSD$
 
 ###  Basic configuration options  ############################
 exec="echo Loading /boot/defaults/loader.conf"
 
 kernel="kernel"		# /boot sub-directory containing kernel and modules
 bootfile="kernel"	# Kernel name (possibly absolute path)
 kernel_options=""	# Flags to be passed to the kernel
 loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local"
 nextboot_conf="/boot/nextboot.conf"
 nextboot_enable="NO"
 verbose_loading="NO"		# Set to YES for verbose loader output
 
 ###  Splash screen configuration  ############################
 splash_bmp_load="NO"		# Set this to YES for bmp splash screen!
 splash_pcx_load="NO"		# Set this to YES for pcx splash screen!
 splash_txt_load="NO"		# Set this to YES for TheDraw splash screen!
 vesa_load="NO"			# Set this to YES to load the vesa module
 bitmap_load="NO"		# Set this to YES if you want splash screen!
 bitmap_name="splash.bmp"	# Set this to the name of the file
 bitmap_type="splash_image_data" # and place it on the module_path
 
 ###  Screen saver modules  ###################################
 # This is best done in rc.conf
 screensave_load="NO"		# Set to YES to load a screensaver module
 screensave_name="green_saver"	# Set to the name of the screensaver module
 
 ###  Early hostid configuration ############################
 hostuuid_load="YES"
 hostuuid_name="/etc/hostid"
 hostuuid_type="hostuuid"
 
 ###  Random number generator configuration  ##################
 # See rc.conf(5). The entropy_boot_file config variable must agree with the
 # settings below.
 entropy_cache_load="YES"		# Set this to NO to disable loading
 					# entropy at boot time
 entropy_cache_name="/boot/entropy"	# Set this to the name of the file
 entropy_cache_type="boot_entropy_cache"	# Required for the kernel to find
 					# the boot-time entropy cache. This
 					# must not change value even if the
 					# _name above does change!
 
-###  RAM Excludelist configuration  ############################
-ram_excludelist_load="NO"		# Set this to YES to load a file
+###  RAM Blacklist configuration  ############################
+ram_blacklist_load="NO"			# Set this to YES to load a file
 					# containing a list of addresses to
 					# exclude from the running system.
-ram_excludeist_name="/boot/excludelist.txt" # Set this to the name of the file
-ram_excludelist_type="ram_excludelist"	# Required for the kernel to find
+ram_blacklist_name="/boot/blacklist.txt" # Set this to the name of the file
+ram_blacklist_type="ram_blacklist"	# Required for the kernel to find
 					# the blacklist module
 
 ###  Microcode loading configuration  ########################
 cpu_microcode_load="NO"			# Set this to YES to load and apply a
 					# microcode update file during boot.
 cpu_microcode_name="/boot/firmware/ucode.bin" # Set this to the microcode
 					      # update file path.
 cpu_microcode_type="cpu_microcode"	# Required for the kernel to find
 					# the microcode update file.
 
 ###  ACPI settings  ##########################################
 acpi_dsdt_load="NO"		# DSDT Overriding
 acpi_dsdt_type="acpi_dsdt"	# Don't change this
 acpi_dsdt_name="/boot/acpi_dsdt.aml"
 				# Override DSDT in BIOS by this file
 acpi_video_load="NO"		# Load the ACPI video extension driver
 
 ###  Audit settings  #########################################
 audit_event_load="NO"		# Preload audit_event config
 audit_event_name="/etc/security/audit_event"
 audit_event_type="etc_security_audit_event"
 
 ###  Initial memory disk settings  ###########################
 #mdroot_load="YES"		# The "mdroot" prefix is arbitrary.
 #mdroot_type="md_image"		# Create md(4) disk at boot.
 #mdroot_name="/boot/root.img"	# Path to a file containing the image.
 #rootdev="ufs:/dev/md0"		# Set the root filesystem to md(4) device.
 
 ###  Loader settings  ########################################
 #loader_delay="3"		# Delay in seconds before loading anything.
 				# Default is unset and disabled (no delay).
 #autoboot_delay="10"		# Delay in seconds before autobooting,
 				# -1 for no user interrupts, NO to disable
 #password=""			# Prevent changes to boot options
 #bootlock_password=""		# Prevent booting (see check-password.4th(8))
 #geom_eli_passphrase_prompt="NO" # Prompt for geli(8) passphrase to mount root
 bootenv_autolist="YES"		# Auto populate the list of ZFS Boot Environments
 #beastie_disable="NO"		# Turn the beastie boot menu on and off
 efi_max_resolution="1x1"	# Set the max resolution for EFI loader to use:
 				# 480p, 720p, 1080p, 2160p/4k, 5k, or specify
 				# WidthxHeight (e.g. 1920x1080)
 #kernels="kernel kernel.old"	# Kernels to display in the boot menu
 kernels_autodetect="YES"	# Auto-detect kernel directories in /boot
 #loader_logo="orbbw"		# Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none
 #comconsole_speed="9600"	# Set the current serial console speed
 #console="vidconsole"		# A comma separated list of console(s)
 #currdev="disk1s1a"		# Set the current device
 module_path="/boot/modules;/boot/dtb;/boot/dtb/overlays"	# Set the module search path
 module_blacklist="drm drm2 radeonkms i915kms amdgpu"	# Loader module blacklist
 #prompt="\\${interpret}"	# Set the command prompt
 #root_disk_unit="0"		# Force the root disk unit number
 #rootdev="disk1s1a"		# Set the root filesystem
 #dumpdev="disk1s1b"		# Set a dump device early in the boot process
 #tftp.blksize="1428"		# Set the RFC 2348 TFTP block size.
 				# If the TFTP server does not support RFC 2348,
 				# the block size is set to 512. Valid: (8,9007)
 #twiddle_divisor="1"		# >1 means slow down the progress indicator.
 
 ###  Kernel settings  ########################################
 # The following boot_ variables are enabled by setting them to any value.
 # Their presence in the kernel environment (see kenv(1)) has the same
 # effect as setting the given boot flag (see boot(8)).
 #boot_askname=""	# -a: Prompt the user for the name of the root device
 #boot_cdrom=""		# -C: Attempt to mount root file system from CD-ROM
 #boot_ddb=""		# -d: Instructs the kernel to start in the DDB debugger
 #boot_dfltroot=""	# -r: Use the statically configured root file system
 #boot_gdb=""		# -g: Selects gdb-remote mode for the kernel debugger
 #boot_multicons=""	# -D: Use multiple consoles
 #boot_mute=""		# -m: Mute the console
 #boot_pause=""		# -p: Pause after each line during device probing
 #boot_serial=""		# -h: Use serial console
 #boot_single=""		# -s: Start system in single-user mode
 #boot_verbose=""	# -v: Causes extra debugging information to be printed
 #init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init"
 			# Sets the list of init candidates
 #init_shell="/bin/sh"	# The shell binary used by init(8).
 #init_script=""		# Initial script to run by init(8) before chrooting.
 #init_chroot=""		# Directory for init(8) to chroot into.
 
 ###  Kernel tunables  ########################################
 #hw.physmem="1G"		# Limit physical memory. See loader(8)
 #kern.dfldsiz=""		# Set the initial data size limit
 #kern.dflssiz=""		# Set the initial stack size limit
 #kern.hz="100"			# Set the kernel interval timer rate
 #kern.maxbcache=""		# Set the max buffer cache KVA storage
 #kern.maxdsiz=""		# Set the max data size
 #kern.maxfiles=""		# Set the sys. wide open files limit
 #kern.maxproc=""		# Set the maximum # of processes
 #kern.maxssiz=""		# Set the max stack size
 #kern.maxswzone=""		# Set the max swmeta KVA storage
 #kern.maxtsiz=""		# Set the max text size
 #kern.maxusers="32"		# Set size of various static tables
 #kern.msgbufsize="65536"	# Set size of kernel message buffer
 #kern.nbuf=""			# Set the number of buffer headers
 #kern.ncallout=""		# Set the maximum # of timer events
 #kern.ngroups="1023"		# Set the maximum # of supplemental groups
 #kern.sgrowsiz=""		# Set the amount to grow stack
 #kern.cam.boot_delay="10000"	# Delay (in ms) of root mount for CAM bus
 				# registration, useful for USB sticks as root
 #kern.cam.scsi_delay="2000"	# Delay (in ms) before probing SCSI
 #kern.ipc.maxsockets=""		# Set the maximum number of sockets available
 #kern.ipc.nmbclusters=""	# Set the number of mbuf clusters
 #kern.ipc.nsfbufs=""		# Set the number of sendfile(2) bufs
 #net.inet.tcp.tcbhashsize=""	# Set the value of TCBHASHSIZE
 #vfs.root.mountfrom=""		# Specify root partition
 #vm.kmem_size=""		# Sets the size of kernel memory (bytes)
 #debug.kdb.break_to_debugger="0" # Allow console to break into debugger.
 #debug.ktr.cpumask="0xf"	# Bitmask of CPUs to enable KTR on
 #debug.ktr.mask="0x1200"	# Bitmask of KTR events to enable
 #debug.ktr.verbose="1"		# Enable console dump of KTR events
 
 ###  Module loading syntax example  ##########################
 #module_load="YES"		# loads module "module"
 #module_name="realname"		# uses "realname" instead of "module"
 #module_type="type"		# passes "-t type" to load
 #module_flags="flags"		# passes "flags" to the module
 #module_before="cmd"		# executes "cmd" before loading the module
 #module_after="cmd"		# executes "cmd" after loading the module
 #module_error="cmd"		# executes "cmd" if load fails