Index: stable/11/usr.sbin/bsdinstall/scripts/wlanconfig
===================================================================
--- stable/11/usr.sbin/bsdinstall/scripts/wlanconfig	(revision 361304)
+++ stable/11/usr.sbin/bsdinstall/scripts/wlanconfig	(revision 361305)
@@ -1,366 +1,365 @@
 #!/bin/sh
 #-
 # Copyright (c) 2011 Nathan Whitehorn
-# Copyright (c) 2013-2016 Devin Teske
+# Copyright (c) 2013-2020 Devin Teske
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
 # are met:
 # 1. Redistributions of source code must retain the above copyright
 #    notice, this list of conditions and the following disclaimer.
 # 2. Redistributions in binary form must reproduce the above copyright
 #    notice, this list of conditions and the following disclaimer in the
 #    documentation and/or other materials provided with the distribution.
 #
 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 # ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 # SUCH DAMAGE.
 #
 # $FreeBSD$
 #
 ############################################################ INCLUDES
 
 BSDCFG_SHARE="/usr/share/bsdconfig"
 . $BSDCFG_SHARE/common.subr || exit 1
 f_include $BSDCFG_SHARE/dialog.subr
 f_dialog_backtitle "FreeBSD Installer"
 
 ############################################################ FUNCTIONS
 
 country_set()
 {
 	local error_str iface_up ifconfig_args=
 
 	#
 	# Setup what was selected
 	# NB: Do not change order of arguments (or regdomain will be ignored)
 	#
 	[ "$2" ] && ifconfig_args="$ifconfig_args country $2"
 	[ "$1" ] && ifconfig_args="$ifconfig_args regdomain $1"
 	[ "$ifconfig_args" ] || return $SUCCESS # Nothing to do
 	ifconfig_args="${ifconfig_args# }"
 
 	# Regdomain/country cannot be applied while interface is running
 	iface_up=$( ifconfig -lu | grep -w "$WLAN_IFACE" )
 	[ "$iface_up" ] && ifconfig "$WLAN_IFACE" down
 	f_eval_catch -dk error_str wlanconfig ifconfig "ifconfig %s %s" \
 		"$WLAN_IFACE" "$ifconfig_args"
 	error_str="${error_str#ifconfig: }"
 	# Restart wpa_supplicant(8) (should not fail).
 	[ "$iface_up" ] && f_eval_catch -d wlanconfig wpa_supplicant \
 		'wpa_supplicant -B -i "%s" -c "%s/wpa_supplicant.conf"' \
 		"$WLAN_IFACE" "$BSDINSTALL_TMPETC"
 	if [ "$error_str" ]; then
-		$DIALOG \
-			--title "$msg_error" \
+		$DIALOG --title "$msg_error" \
 			--backtitle "$DIALOG_BACKTITLE" \
 			--yes-label Change \
 			--no-label Ignore \
 			--yesno \
 			"Error while applying chosen settings ($error_str)" \
 			0 0 || return $SUCCESS # Skip
 		return $FAILURE # Restart
 	else
-		awk 'sub(/^\t\t/,"")||1' \
-			> "$BSDINSTALL_TMPETC/rc.conf.net.wlan" <<-EOF
+		cat > "$BSDINSTALL_TMPETC/rc.conf.net.wlan" <<-EOF
 		create_args_$WLAN_IFACE="$ifconfig_args"
 		EOF
 	fi
 
 	return $SUCCESS
 }
 
 dialog_country_select()
 {
 	local input regdomains countries regdomain country prompt
 	local no_default="<not selected>"
 	local default_regdomain="${1:-$no_default}"
 	local default_country="${2:-$no_default}"
 
 	#
 	# Parse available countries/regdomains
 	#
 	input=$( ifconfig "$WLAN_IFACE" list countries | sed -e 's/DEBUG//gi' )
 	regdomains=$( echo "$input" | awk '
 		sub(/.*domains:/, ""), /[^[:alnum:][[:space:]]/ {
 			n = split($0, domains)
 			for (i = 1; i <= n; i++)
 				printf "'\''%s'\'' '\'\''", domains[i]
 		}
 	' | sort )
 	countries=$( echo "$input" | awk '
 		sub(/Country codes:/, ""), sub(/Regulatory.*/, "") {
 			while (match($0, /[[:upper:]][[:upper:][:digit:]] /)) {
 				country = substr($0, RSTART)
-				sub(/ [[:upper:]][[:upper:][:digit:]].*/, "", country)
+				sub(/ [[:upper:]][[:upper:][:digit:]].*/, "",
+					country)
 				code = substr(country, 1, 2)
 				desc = substr(country, 4)
 				sub(/[[:space:]]*$/, "", desc)
 				printf "'\''%s'\'' '\''%s'\''\n", code, desc
 				$0 = substr($0, RSTART + RLENGTH)
 			}
 		}
 	' | sort )
 
 	f_dialog_title "Regdomain selection"
 	prompt="Select your regdomain."
 	eval f_dialog_menu_size height width rows \
 		\"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \
 		\"\$prompt\" \"\" $regdomains
 	regdomain=$( eval $DIALOG \
 		--title \"\$DIALOG_TITLE\"             \
 		--backtitle \"\$DIALOG_BACKTITLE\"     \
 		--cancel-label \"\$msg_skip\"          \
 		--default-item \"\$default_regdomain\" \
 		--menu \"\$prompt\"                    \
 		$height $width $rows                   \
 		$regdomains                            \
 		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
 	)
 	f_dialog_data_sanitize regdomain
 
 	f_dialog_title "Country selection"
 	prompt="Select your country."
 	eval f_dialog_menu_size height width rows \
 		\"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \
 		\"\$prompt\" \"\" $countries
 	country=$( eval $DIALOG \
 		--title \"\$DIALOG_TITLE\"           \
 		--backtitle \"\$DIALOG_BACKTITLE\"   \
 		--cancel-label \"\$msg_skip\"        \
 		--default-item \"\$default_country\" \
 		--menu \"\$prompt\"                  \
 		$height $width $rows                 \
 		$countries                           \
 		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
 	)
 	f_dialog_data_sanitize country
 
 	country_set "$regdomain" "$country"
 }
 
 ############################################################ MAIN
 
 : > "$BSDINSTALL_TMPETC/wpa_supplicant.conf"
 chmod 0600 "$BSDINSTALL_TMPETC/wpa_supplicant.conf"
 
-cat >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" << EOF
+cat >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<EOF
 ctrl_interface=/var/run/wpa_supplicant
 eapol_version=2
 ap_scan=1
 fast_reauth=1
 
 EOF
 
 #
 # Try to reach wpa_supplicant. If it isn't running and we can modify the
 # existing system, start it. Otherwise, fail.
 #
 if ! f_eval_catch -d wlanconfig wpa_cli "wpa_cli ping"; then
 	if [ ! "$BSDINSTALL_CONFIGCURRENT" ]; then
 		f_show_err "Wireless cannot be configured without %s" \
 		           "making changes to the local system!"
 		exit 1
 	fi
 	f_eval_catch wlanconfig wpa_supplicant \
 		'wpa_supplicant -B -i "%s" -c "%s/wpa_supplicant.conf"' \
 		"$1" "$BSDINSTALL_TMPETC" || exit 1
 
 	# See if we succeeded
 	f_eval_catch wlanconfig wpa_cli "wpa_cli ping" || exit 1
 fi
 
 #
 # There is no way to check country/regdomain without (possible)
 # interface state modification
 #
 if [ "$BSDINSTALL_CONFIGCURRENT" ]; then
 	# Get current country/regdomain for selected interface
 	WLAN_IFACE=$( wpa_cli ifname | tail -n 1 )
 	INPUT=$( ifconfig "$WLAN_IFACE" list regdomain | head -n 1 )
 	DEF_REGDOMAIN=$( echo "$INPUT" | cut -w -f 2 )
 	DEF_COUNTRY=$( echo "$INPUT" | cut -w -f 4 )
 	[ "$DEF_REGDOMAIN" = 0 ] && DEF_REGDOMAIN="<not selected>"
 	[ "$DEF_COUNTRY" = 0 ] && DEF_COUNTRY="<not selected>"
 	f_dialog_title "Regdomain/country"
 	if f_yesno "Change regdomain/country ($DEF_REGDOMAIN/$DEF_COUNTRY)?"
 	then
 		while ! dialog_country_select "$DEF_REGDOMAIN" "$DEF_COUNTRY"
 		do :; done
 	fi
 fi
 
 while :; do
 	SCANSSID=0
 	f_eval_catch -d wlanconfig wpa_cli "wpa_cli scan"
 	f_dialog_title "Scanning"
 	f_dialog_pause "Waiting 5 seconds to scan for wireless networks..." 5 ||
 		exit 1
 
 	f_eval_catch -dk SCAN_RESULTS wlanconfig wpa_cli "wpa_cli scan_results"
 	NETWORKS=$( echo "$SCAN_RESULTS" | awk -F '\t' '
 		/..:..:..:..:..:../ && $5 { printf "\"%s\"\t\"%s\"\n", $5, $4 }
 	' | sort | uniq )
 
 	if [ ! "$NETWORKS" ]; then
 		f_dialog_title "$msg_error"
 		f_yesno "No wireless networks were found. Rescan?" && continue
 		exit 1
 	fi
 
 	f_dialog_title "Network Selection"
 	prompt="Select a wireless network to connect to."
 	f_dialog_menu_size height width rows "$DIALOG_TITLE" \
 		"$DIALOG_BACKTITLE" "$prompt" "" $menu_list
 	NETWORK=$( eval $DIALOG \
 		--title \"\$DIALOG_TITLE\"         \
 		--backtitle \"\$DIALOG_BACKTITLE\" \
 		--extra-button                     \
 		--extra-label \"Rescan\"           \
 		--menu \"\$prompt\"                \
 		$height $width $rows               \
 		$NETWORKS                          \
 		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
 	)
 	retval=$?
 	f_dialog_data_sanitize NETWORK
 	case $retval in
 	$DIALOG_OK) break ;;
 	$DIALOG_CANCEL)
 		# Ask if the user wants to select network manually
 		f_dialog_title "Network Selection"
 		f_yesno "Do you want to select the network manually?" || exit 1
 		f_dialog_input NETWORK "Enter SSID" || exit 1
 		prompt="Select encryption type"
 		menu_list="
 			'1 WPA/WPA2 PSK' ''
 			'2 WPA/WPA2 EAP' ''
 			'3 WEP' ''
 			'0 None' ''
 		" # END-QUOTE
 		eval f_dialog_menu_size height width rows \"\$DIALOG_TITLE\" \
 			\"\$DIALOG_BACKTITLE\" \"\$prompt\" \"\" $menu_list
 		ENCRYPTION=$( eval $DIALOG \
 			--title \"\$DIALOG_TITLE\"         \
 			--backtitle \"\$DIALOG_BACKTITLE\" \
 			--menu \"\$prompt\"                \
 			$height $width $rows               \
 			$menu_list                         \
 			2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
 		) || exit 1
 		SCANSSID=1
 		break
 		;;
 	$DIALOG_EXTRA) # Rescan
 		;;
 	esac
 done
 
 [ "$ENCRYPTION" ] || ENCRYPTION=$( echo "$NETWORKS" |
 	awk -F '\t' "/^\"$NETWORK\"\t/ { print \$2 }" )
 
 if echo "$ENCRYPTION" | grep -q PSK; then
 	PASS=$( $DIALOG \
 		--title "WPA Setup"              \
 		--backtitle "$DIALOG_BACKTITLE"  \
 		--insecure                       \
 		--mixedform ""                   \
 		0 0 0                            \
 		"SSID" 1 0 "$NETWORK" 1 12 0 0 2 \
 		"Password" 2 0 "" 2 12 15 63 1   \
 		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
 	) || exec "$0" "$@"
-	awk 'sub(/^\t/,"")||1' \
-		>> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<EOF
-network={
-	ssid="$NETWORK"
-	scan_ssid=$SCANSSID
-	psk="$PASS"
-	priority=5
-}
-EOF
+	awk 'sub(/^\\/,"")||1' \
+		>> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF
+	network={
+	\	ssid="$NETWORK"
+	\	scan_ssid=$SCANSSID
+	\	psk="$PASS"
+	\	priority=5
+	}
+	EOF
 elif echo "$ENCRYPTION" | grep -q EAP; then
 	USERPASS=$( $DIALOG \
 		--title "WPA-Enterprise Setup"   \
 		--backtitle "$DIALOG_BACKTITLE"  \
 		--insecure                       \
 		--mixedform ""                   \
 		0 0 0                            \
 		"SSID" 1 0 "$NETWORK" 1 12 0 0 2 \
 		"Username" 2 0 "" 2 12 25 63 0   \
 		"Password" 3 0 "" 3 12 25 63 1   \
 		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
 	) || exec "$0" "$@"
-	awk 'sub(/^\t/,"")||1' \
-		>> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<EOF
-network={
-	ssid="$NETWORK"
-	scan_ssid=$SCANSSID
-	key_mgmt=WPA-EAP$(
-	echo "$USERPASS" | awk '
-		NR == 1 { printf "\n\t\tidentity=\"%s\"", $1 }
-		NR == 2 { printf "\n\t\tpassword=\"%s\"", $1 }
-	' )
-	priority=5
-}
-EOF
+	awk 'sub(/^\\/,"")||1' \
+		>> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF
+	network={
+	\	ssid="$NETWORK"
+	\	scan_ssid=$SCANSSID
+	\	key_mgmt=WPA-EAP$(
+		echo "$USERPASS" | awk '
+			NR == 1 { printf "\n\tidentity=\"%s\"", $1 }
+			NR == 2 { printf "\n\tpassword=\"%s\"", $1 }
+		' )
+	\	priority=5
+	}
+	EOF
 elif echo "$ENCRYPTION" | grep -q WEP; then
 	WEPKEY=$( $DIALOG \
 		--title "WEP Setup"              \
 		--backtitle "$DIALOG_BACKTITLE"  \
 		--insecure                       \
 		--mixedform ""                   \
 		0 0 0                            \
 		"SSID" 1 0 "$NETWORK" 1 12 0 0 2 \
 		"WEP Key 0" 2 0 "" 2 12 15 0 1   \
 		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
 	) || exec "$0" "$@"
-	awk 'sub(/^\t/,"")||1' \
-		>> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<EOF
-network={
-	ssid="$NETWORK"
-	scan_ssid=$SCANSSID
-	key_mgmt=NONE
-	wep_key0="$WEPKEY"
-	wep_tx_keyidx=0
-	priority=5
-}
-EOF
+	awk 'sub(/^\\/,"")||1' \
+		>> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF
+	network={
+	\	ssid="$NETWORK"
+	\	scan_ssid=$SCANSSID
+	\	key_mgmt=NONE
+	\	wep_key0="$WEPKEY"
+	\	wep_tx_keyidx=0
+	\	priority=5
+	}
+	EOF
 else # Open
-	awk 'sub(/^\t/,"")||1' \
-		>> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<EOF
-network={
-	ssid="$NETWORK"
-	scan_ssid=$SCANSSID
-	key_mgmt=NONE
-	priority=5
-}
-EOF
+	awk 'sub(/^\\/,"")||1' \
+		>> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF
+	network={
+	\	ssid="$NETWORK"
+	\	scan_ssid=$SCANSSID
+	\	key_mgmt=NONE
+	\	priority=5
+	}
+	EOF
 fi
 
 # Connect to any open networks policy
-cat >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" << EOF
+cat >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<EOF
 network={
 	priority=0
 	key_mgmt=NONE
 }
 EOF
 
 # Bring up new network
 [ "$BSDINSTALL_CONFIGCURRENT" ] &&
 	f_eval_catch -d wlanconfig wpa_cli "wpa_cli reconfigure"
 
 exit $SUCCESS
 
 ################################################################################
 # END
 ################################################################################
Index: stable/11
===================================================================
--- stable/11	(revision 361304)
+++ stable/11	(revision 361305)

Property changes on: stable/11
___________________________________________________________________
Modified: svn:mergeinfo
## -0,0 +0,1 ##
   Merged /head:r361300