Index: head/sys/dev/usb/input/wmt.c =================================================================== --- head/sys/dev/usb/input/wmt.c (revision 358823) +++ head/sys/dev/usb/input/wmt.c (revision 358824) @@ -1,885 +1,884 @@ /*- * Copyright (c) 2014-2017 Vladimir Kondratyev * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * MS Windows 7/8/10 compatible USB HID Multi-touch Device driver. * https://msdn.microsoft.com/en-us/library/windows/hardware/jj151569(v=vs.85).aspx * https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt */ #include #include #include #include #include #include #include #include #include #include #include #include "usbdevs.h" #include #include #include #include #include #include #include #define USB_DEBUG_VAR wmt_debug #include #ifdef USB_DEBUG static int wmt_debug = 0; static SYSCTL_NODE(_hw_usb, OID_AUTO, wmt, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, "USB MSWindows 7/8/10 compatible Multi-touch Device"); SYSCTL_INT(_hw_usb_wmt, OID_AUTO, debug, CTLFLAG_RWTUN, &wmt_debug, 1, "Debug level"); #endif #define WMT_BSIZE 1024 /* bytes, buffer size */ enum { WMT_INTR_DT, WMT_N_TRANSFER, }; enum { WMT_TIP_SWITCH, #define WMT_SLOT WMT_TIP_SWITCH WMT_WIDTH, #define WMT_MAJOR WMT_WIDTH WMT_HEIGHT, #define WMT_MINOR WMT_HEIGHT WMT_ORIENTATION, WMT_X, WMT_Y, WMT_CONTACTID, WMT_PRESSURE, WMT_IN_RANGE, WMT_CONFIDENCE, WMT_TOOL_X, WMT_TOOL_Y, WMT_N_USAGES, }; #define WMT_NO_CODE (ABS_MAX + 10) #define WMT_NO_USAGE -1 struct wmt_hid_map_item { char name[5]; int32_t usage; /* HID usage */ uint32_t code; /* Evdev event code */ bool required; /* Required for MT Digitizers */ }; static const struct wmt_hid_map_item wmt_hid_map[WMT_N_USAGES] = { [WMT_TIP_SWITCH] = { /* WMT_SLOT */ .name = "TIP", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_TIP_SWITCH), .code = ABS_MT_SLOT, .required = true, }, [WMT_WIDTH] = { /* WMT_MAJOR */ .name = "WDTH", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_WIDTH), .code = ABS_MT_TOUCH_MAJOR, .required = false, }, [WMT_HEIGHT] = { /* WMT_MINOR */ .name = "HGHT", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_HEIGHT), .code = ABS_MT_TOUCH_MINOR, .required = false, }, [WMT_ORIENTATION] = { .name = "ORIE", .usage = WMT_NO_USAGE, .code = ABS_MT_ORIENTATION, .required = false, }, [WMT_X] = { .name = "X", .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X), .code = ABS_MT_POSITION_X, .required = true, }, [WMT_Y] = { .name = "Y", .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y), .code = ABS_MT_POSITION_Y, .required = true, }, [WMT_CONTACTID] = { .name = "C_ID", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACTID), .code = ABS_MT_TRACKING_ID, .required = true, }, [WMT_PRESSURE] = { .name = "PRES", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_TIP_PRESSURE), .code = ABS_MT_PRESSURE, .required = false, }, [WMT_IN_RANGE] = { .name = "RANG", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_IN_RANGE), .code = ABS_MT_DISTANCE, .required = false, }, [WMT_CONFIDENCE] = { .name = "CONF", .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_CONFIDENCE), .code = WMT_NO_CODE, .required = false, }, [WMT_TOOL_X] = { /* Shares HID usage with WMT_X */ .name = "TL_X", .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X), .code = ABS_MT_TOOL_X, .required = false, }, [WMT_TOOL_Y] = { /* Shares HID usage with WMT_Y */ .name = "TL_Y", .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y), .code = ABS_MT_TOOL_Y, .required = false, }, }; struct wmt_absinfo { int32_t min; int32_t max; int32_t res; }; struct wmt_softc { device_t dev; struct mtx mtx; struct wmt_absinfo ai[WMT_N_USAGES]; struct hid_location locs[MAX_MT_SLOTS][WMT_N_USAGES]; struct hid_location nconts_loc; struct usb_xfer *xfer[WMT_N_TRANSFER]; struct evdev_dev *evdev; uint32_t slot_data[WMT_N_USAGES]; uint32_t caps; uint32_t isize; uint32_t nconts_max; uint8_t report_id; struct hid_location cont_max_loc; uint32_t cont_max_rlen; uint8_t cont_max_rid; uint32_t thqa_cert_rlen; uint8_t thqa_cert_rid; uint8_t buf[WMT_BSIZE] __aligned(4); }; #define USAGE_SUPPORTED(caps, usage) ((caps) & (1 << (usage))) #define WMT_FOREACH_USAGE(caps, usage) \ for ((usage) = 0; (usage) < WMT_N_USAGES; ++(usage)) \ if (USAGE_SUPPORTED((caps), (usage))) static bool wmt_hid_parse(struct wmt_softc *, const void *, uint16_t); static void wmt_cont_max_parse(struct wmt_softc *, const void *, uint16_t); static usb_callback_t wmt_intr_callback; static device_probe_t wmt_probe; static device_attach_t wmt_attach; static device_detach_t wmt_detach; #if __FreeBSD_version >= 1200077 static evdev_open_t wmt_ev_open; static evdev_close_t wmt_ev_close; #else static evdev_open_t wmt_ev_open_11; static evdev_close_t wmt_ev_close_11; #endif static const struct evdev_methods wmt_evdev_methods = { #if __FreeBSD_version >= 1200077 .ev_open = &wmt_ev_open, .ev_close = &wmt_ev_close, #else .ev_open = &wmt_ev_open_11, .ev_close = &wmt_ev_close_11, #endif }; static const struct usb_config wmt_config[WMT_N_TRANSFER] = { [WMT_INTR_DT] = { .type = UE_INTERRUPT, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .flags = { .pipe_bof = 1, .short_xfer_ok = 1 }, .bufsize = WMT_BSIZE, .callback = &wmt_intr_callback, }, }; static int wmt_probe(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); void *d_ptr; uint16_t d_len; int err; if (uaa->usb_mode != USB_MODE_HOST) return (ENXIO); if (uaa->info.bInterfaceClass != UICLASS_HID) return (ENXIO); if (usb_test_quirk(uaa, UQ_WMT_IGNORE)) return (ENXIO); err = usbd_req_get_hid_desc(uaa->device, NULL, &d_ptr, &d_len, M_TEMP, uaa->info.bIfaceIndex); if (err) return (ENXIO); if (wmt_hid_parse(NULL, d_ptr, d_len)) err = BUS_PROBE_DEFAULT; else err = ENXIO; free(d_ptr, M_TEMP); return (err); } static int wmt_attach(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); struct wmt_softc *sc = device_get_softc(dev); void *d_ptr; uint16_t d_len; size_t i; int err; bool hid_ok; device_set_usb_desc(dev); sc->dev = dev; /* Get HID descriptor */ err = usbd_req_get_hid_desc(uaa->device, NULL, &d_ptr, &d_len, M_TEMP, uaa->info.bIfaceIndex); if (err) { DPRINTF("usbd_req_get_hid_desc error=%s\n", usbd_errstr(err)); return (ENXIO); } hid_ok = wmt_hid_parse(sc, d_ptr, d_len); free(d_ptr, M_TEMP); if (!hid_ok) { DPRINTF("multi-touch HID descriptor not found\n"); return (ENXIO); } /* Check HID report length */ if (sc->isize <= 0 || sc->isize > WMT_BSIZE) { DPRINTF("Input size invalid or too large: %d\n", sc->isize); return (ENXIO); } /* Fetch and parse "Contact count maximum" feature report */ if (sc->cont_max_rlen > 0 && sc->cont_max_rlen <= WMT_BSIZE) { err = usbd_req_get_report(uaa->device, NULL, sc->buf, sc->cont_max_rlen, uaa->info.bIfaceIndex, UHID_FEATURE_REPORT, sc->cont_max_rid); if (err == USB_ERR_NORMAL_COMPLETION) wmt_cont_max_parse(sc, sc->buf, sc->cont_max_rlen); else DPRINTF("usbd_req_get_report error=(%s)\n", usbd_errstr(err)); } else DPRINTF("Feature report %hhu size invalid or too large: %u\n", sc->cont_max_rid, sc->cont_max_rlen); /* Fetch THQA certificate to enable some devices like WaveShare */ if (sc->thqa_cert_rlen > 0 && sc->thqa_cert_rlen <= WMT_BSIZE && sc->thqa_cert_rid != sc->cont_max_rid) (void)usbd_req_get_report(uaa->device, NULL, sc->buf, sc->thqa_cert_rlen, uaa->info.bIfaceIndex, UHID_FEATURE_REPORT, sc->thqa_cert_rid); mtx_init(&sc->mtx, "wmt lock", NULL, MTX_DEF); err = usbd_transfer_setup(uaa->device, &uaa->info.bIfaceIndex, sc->xfer, wmt_config, WMT_N_TRANSFER, sc, &sc->mtx); if (err != USB_ERR_NORMAL_COMPLETION) { DPRINTF("usbd_transfer_setup error=%s\n", usbd_errstr(err)); goto detach; } sc->evdev = evdev_alloc(); evdev_set_name(sc->evdev, device_get_desc(dev)); evdev_set_phys(sc->evdev, device_get_nameunit(dev)); evdev_set_id(sc->evdev, BUS_USB, uaa->info.idVendor, uaa->info.idProduct, 0); evdev_set_serial(sc->evdev, usb_get_serial(uaa->device)); evdev_set_methods(sc->evdev, sc, &wmt_evdev_methods); evdev_set_flag(sc->evdev, EVDEV_FLAG_MT_STCOMPAT); evdev_support_prop(sc->evdev, INPUT_PROP_DIRECT); evdev_support_event(sc->evdev, EV_SYN); evdev_support_event(sc->evdev, EV_ABS); WMT_FOREACH_USAGE(sc->caps, i) { if (wmt_hid_map[i].code != WMT_NO_CODE) evdev_support_abs(sc->evdev, wmt_hid_map[i].code, 0, sc->ai[i].min, sc->ai[i].max, 0, 0, sc->ai[i].res); } err = evdev_register_mtx(sc->evdev, &sc->mtx); if (err) goto detach; return (0); detach: wmt_detach(dev); return (ENXIO); } static int wmt_detach(device_t dev) { struct wmt_softc *sc = device_get_softc(dev); evdev_free(sc->evdev); usbd_transfer_unsetup(sc->xfer, WMT_N_TRANSFER); mtx_destroy(&sc->mtx); return (0); } static void wmt_process_report(struct wmt_softc *sc, uint8_t *buf, int len) { size_t usage; uint32_t *slot_data = sc->slot_data; uint32_t cont; uint32_t nconts; uint32_t width; uint32_t height; int32_t slot; nconts = hid_get_data_unsigned(buf, len, &sc->nconts_loc); #ifdef USB_DEBUG DPRINTFN(6, "nconts = %u ", (unsigned)nconts); if (wmt_debug >= 6) { WMT_FOREACH_USAGE(sc->caps, usage) { if (wmt_hid_map[usage].usage != WMT_NO_USAGE) printf(" %-4s", wmt_hid_map[usage].name); } printf("\n"); } #endif if (nconts > sc->nconts_max) { DPRINTF("Contact count overflow %u\n", (unsigned)nconts); nconts = sc->nconts_max; } /* Use protocol Type B for reporting events */ for (cont = 0; cont < nconts; cont++) { bzero(slot_data, sizeof(sc->slot_data)); WMT_FOREACH_USAGE(sc->caps, usage) { if (sc->locs[cont][usage].size > 0) slot_data[usage] = hid_get_data_unsigned( buf, len, &sc->locs[cont][usage]); } slot = evdev_get_mt_slot_by_tracking_id(sc->evdev, slot_data[WMT_CONTACTID]); #ifdef USB_DEBUG DPRINTFN(6, "cont%01x: data = ", cont); if (wmt_debug >= 6) { WMT_FOREACH_USAGE(sc->caps, usage) { if (wmt_hid_map[usage].usage != WMT_NO_USAGE) printf("%04x ", slot_data[usage]); } printf("slot = %d\n", (int)slot); } #endif if (slot == -1) { DPRINTF("Slot overflow for contact_id %u\n", (unsigned)slot_data[WMT_CONTACTID]); continue; } if (slot_data[WMT_TIP_SWITCH] != 0 && !(USAGE_SUPPORTED(sc->caps, WMT_CONFIDENCE) && slot_data[WMT_CONFIDENCE] == 0)) { /* This finger is in proximity of the sensor */ slot_data[WMT_SLOT] = slot; slot_data[WMT_IN_RANGE] = !slot_data[WMT_IN_RANGE]; /* Divided by two to match visual scale of touch */ width = slot_data[WMT_WIDTH] >> 1; height = slot_data[WMT_HEIGHT] >> 1; slot_data[WMT_ORIENTATION] = width > height; slot_data[WMT_MAJOR] = MAX(width, height); slot_data[WMT_MINOR] = MIN(width, height); WMT_FOREACH_USAGE(sc->caps, usage) if (wmt_hid_map[usage].code != WMT_NO_CODE) evdev_push_abs(sc->evdev, wmt_hid_map[usage].code, slot_data[usage]); } else { evdev_push_abs(sc->evdev, ABS_MT_SLOT, slot); evdev_push_abs(sc->evdev, ABS_MT_TRACKING_ID, -1); } } evdev_sync(sc->evdev); } static void wmt_intr_callback(struct usb_xfer *xfer, usb_error_t error) { struct wmt_softc *sc = usbd_xfer_softc(xfer); struct usb_page_cache *pc; uint8_t *buf = sc->buf; int len; usbd_xfer_status(xfer, &len, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: pc = usbd_xfer_get_frame(xfer, 0); DPRINTFN(6, "sc=%p actlen=%d\n", sc, len); if (len >= (int)sc->isize || (len > 0 && sc->report_id != 0)) { /* Limit report length to the maximum */ if (len > (int)sc->isize) len = sc->isize; usbd_copy_out(pc, 0, buf, len); /* Ignore irrelevant reports */ if (sc->report_id && *buf != sc->report_id) goto tr_ignore; /* Make sure we don't process old data */ if (len < sc->isize) bzero(buf + len, sc->isize - len); /* Strip leading "report ID" byte */ if (sc->report_id) { len--; buf++; } wmt_process_report(sc, buf, len); } else { tr_ignore: DPRINTF("Ignored transfer, %d bytes\n", len); } case USB_ST_SETUP: tr_setup: usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); break; default: if (error != USB_ERR_CANCELLED) { /* Try clear stall first */ usbd_xfer_set_stall(xfer); goto tr_setup; } break; } } static void wmt_ev_close_11(struct evdev_dev *evdev, void *ev_softc) { struct wmt_softc *sc = ev_softc; mtx_assert(&sc->mtx, MA_OWNED); usbd_transfer_stop(sc->xfer[WMT_INTR_DT]); } static int wmt_ev_open_11(struct evdev_dev *evdev, void *ev_softc) { struct wmt_softc *sc = ev_softc; mtx_assert(&sc->mtx, MA_OWNED); usbd_transfer_start(sc->xfer[WMT_INTR_DT]); return (0); } #if __FreeBSD_version >= 1200077 static int wmt_ev_close(struct evdev_dev *evdev) { struct wmt_softc *sc = evdev_get_softc(evdev); wmt_ev_close_11(evdev, sc); return (0); } static int wmt_ev_open(struct evdev_dev *evdev) { struct wmt_softc *sc = evdev_get_softc(evdev); return (wmt_ev_open_11(evdev, sc)); } #endif /* port of userland hid_report_size() from usbhid(3) to kernel */ static int wmt_hid_report_size(const void *buf, uint16_t len, enum hid_kind k, uint8_t id) { struct hid_data *d; struct hid_item h; uint32_t temp; uint32_t hpos; uint32_t lpos; int report_id = 0; hpos = 0; lpos = 0xFFFFFFFF; for (d = hid_start_parse(buf, len, 1 << k); hid_get_item(d, &h);) { if (h.kind == k && h.report_ID == id) { /* compute minimum */ if (lpos > h.loc.pos) lpos = h.loc.pos; /* compute end position */ temp = h.loc.pos + (h.loc.size * h.loc.count); /* compute maximum */ if (hpos < temp) hpos = temp; if (h.report_ID != 0) report_id = 1; } } hid_end_parse(d); /* safety check - can happen in case of currupt descriptors */ if (lpos > hpos) temp = 0; else temp = hpos - lpos; /* return length in bytes rounded up */ return ((temp + 7) / 8 + report_id); } static bool wmt_hid_parse(struct wmt_softc *sc, const void *d_ptr, uint16_t d_len) { struct hid_item hi; struct hid_data *hd; size_t i; size_t cont = 0; uint32_t caps = 0; int32_t cont_count_max = 0; uint8_t report_id = 0; uint8_t cont_max_rid = 0; uint8_t thqa_cert_rid = 0; bool touch_coll = false; bool finger_coll = false; bool cont_count_found = false; bool scan_time_found = false; #define WMT_HI_ABSOLUTE(hi) \ (((hi).flags & (HIO_CONST|HIO_VARIABLE|HIO_RELATIVE)) == HIO_VARIABLE) #define HUMS_THQA_CERT 0xC5 /* Parse features for maximum contact count */ hd = hid_start_parse(d_ptr, d_len, 1 << hid_feature); while (hid_get_item(hd, &hi)) { switch (hi.kind) { case hid_collection: if (hi.collevel == 1 && hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_TOUCHSCREEN)) touch_coll = true; break; case hid_endcollection: if (hi.collevel == 0 && touch_coll) touch_coll = false; break; case hid_feature: if (hi.collevel == 1 && touch_coll && hi.usage == HID_USAGE2(HUP_MICROSOFT, HUMS_THQA_CERT)) { thqa_cert_rid = hi.report_ID; break; } - if (hi.collevel == 1 && touch_coll && - WMT_HI_ABSOLUTE(hi) && hi.usage == - HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACT_MAX)) { + if (hi.collevel == 1 && touch_coll && hi.usage == + HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACT_MAX)) { cont_count_max = hi.logical_maximum; cont_max_rid = hi.report_ID; if (sc != NULL) sc->cont_max_loc = hi.loc; } break; default: break; } } hid_end_parse(hd); /* Maximum contact count is required usage */ if (cont_max_rid == 0) return (false); touch_coll = false; /* Parse input for other parameters */ hd = hid_start_parse(d_ptr, d_len, 1 << hid_input); while (hid_get_item(hd, &hi)) { switch (hi.kind) { case hid_collection: if (hi.collevel == 1 && hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_TOUCHSCREEN)) touch_coll = true; else if (touch_coll && hi.collevel == 2 && (report_id == 0 || report_id == hi.report_ID) && hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_FINGER)) finger_coll = true; break; case hid_endcollection: if (hi.collevel == 1 && finger_coll) { finger_coll = false; cont++; } else if (hi.collevel == 0 && touch_coll) touch_coll = false; break; case hid_input: /* * Ensure that all usages are located within the same * report and proper collection. */ if (WMT_HI_ABSOLUTE(hi) && touch_coll && (report_id == 0 || report_id == hi.report_ID)) report_id = hi.report_ID; else break; if (hi.collevel == 1 && hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACTCOUNT)) { cont_count_found = true; if (sc != NULL) sc->nconts_loc = hi.loc; break; } /* Scan time is required but clobbered by evdev */ if (hi.collevel == 1 && hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_SCAN_TIME)) { scan_time_found = true; break; } if (!finger_coll || hi.collevel != 2) break; if (sc == NULL && cont > 0) break; if (cont >= MAX_MT_SLOTS) { DPRINTF("Finger %zu ignored\n", cont); break; } for (i = 0; i < WMT_N_USAGES; i++) { if (hi.usage == wmt_hid_map[i].usage) { if (sc == NULL) { if (USAGE_SUPPORTED(caps, i)) continue; caps |= 1 << i; break; } /* * HUG_X usage is an array mapped to * both ABS_MT_POSITION and ABS_MT_TOOL * events. So don`t stop search if we * already have HUG_X mapping done. */ if (sc->locs[cont][i].size) continue; sc->locs[cont][i] = hi.loc; /* * Hid parser returns valid logical and * physical sizes for first finger only * at least on ElanTS 0x04f3:0x0012. */ if (cont > 0) break; caps |= 1 << i; sc->ai[i] = (struct wmt_absinfo) { .max = hi.logical_maximum, .min = hi.logical_minimum, .res = hid_item_resolution(&hi), }; break; } } break; default: break; } } hid_end_parse(hd); /* Check for required HID Usages */ if (!cont_count_found || !scan_time_found || cont == 0) return (false); for (i = 0; i < WMT_N_USAGES; i++) { if (wmt_hid_map[i].required && !USAGE_SUPPORTED(caps, i)) return (false); } /* Stop probing here */ if (sc == NULL) return (true); /* * According to specifications 'Contact Count Maximum' should be read * from Feature Report rather than from HID descriptor. Set sane * default value now to handle the case of 'Get Report' request failure */ if (cont_count_max < 1) cont_count_max = cont; /* Cap contact count maximum to MAX_MT_SLOTS */ if (cont_count_max > MAX_MT_SLOTS) cont_count_max = MAX_MT_SLOTS; /* Set number of MT protocol type B slots */ sc->ai[WMT_SLOT] = (struct wmt_absinfo) { .min = 0, .max = cont_count_max - 1, .res = 0, }; /* Report touch orientation if both width and height are supported */ if (USAGE_SUPPORTED(caps, WMT_WIDTH) && USAGE_SUPPORTED(caps, WMT_HEIGHT)) { caps |= (1 << WMT_ORIENTATION); sc->ai[WMT_ORIENTATION].max = 1; } sc->isize = wmt_hid_report_size(d_ptr, d_len, hid_input, report_id); sc->cont_max_rlen = wmt_hid_report_size(d_ptr, d_len, hid_feature, cont_max_rid); if (thqa_cert_rid > 0) sc->thqa_cert_rlen = wmt_hid_report_size(d_ptr, d_len, hid_feature, thqa_cert_rid); sc->report_id = report_id; sc->caps = caps; sc->nconts_max = cont; sc->cont_max_rid = cont_max_rid; sc->thqa_cert_rid = thqa_cert_rid; /* Announce information about the touch device */ device_printf(sc->dev, "%d contacts and [%s%s%s%s%s]. Report range [%d:%d] - [%d:%d]\n", (int)cont_count_max, USAGE_SUPPORTED(sc->caps, WMT_IN_RANGE) ? "R" : "", USAGE_SUPPORTED(sc->caps, WMT_CONFIDENCE) ? "C" : "", USAGE_SUPPORTED(sc->caps, WMT_WIDTH) ? "W" : "", USAGE_SUPPORTED(sc->caps, WMT_HEIGHT) ? "H" : "", USAGE_SUPPORTED(sc->caps, WMT_PRESSURE) ? "P" : "", (int)sc->ai[WMT_X].min, (int)sc->ai[WMT_Y].min, (int)sc->ai[WMT_X].max, (int)sc->ai[WMT_Y].max); return (true); } static void wmt_cont_max_parse(struct wmt_softc *sc, const void *r_ptr, uint16_t r_len) { uint32_t cont_count_max; cont_count_max = hid_get_data_unsigned((const uint8_t *)r_ptr + 1, r_len - 1, &sc->cont_max_loc); if (cont_count_max > MAX_MT_SLOTS) { DPRINTF("Hardware reported %d contacts while only %d is " "supported\n", (int)cont_count_max, MAX_MT_SLOTS); cont_count_max = MAX_MT_SLOTS; } /* Feature report is a primary source of 'Contact Count Maximum' */ if (cont_count_max > 0 && cont_count_max != sc->ai[WMT_SLOT].max + 1) { sc->ai[WMT_SLOT].max = cont_count_max - 1; device_printf(sc->dev, "%d feature report contacts", cont_count_max); } } static const STRUCT_USB_HOST_ID wmt_devs[] = { /* generic HID class w/o boot interface */ {USB_IFACE_CLASS(UICLASS_HID), USB_IFACE_SUBCLASS(0),}, }; static devclass_t wmt_devclass; static device_method_t wmt_methods[] = { DEVMETHOD(device_probe, wmt_probe), DEVMETHOD(device_attach, wmt_attach), DEVMETHOD(device_detach, wmt_detach), DEVMETHOD_END }; static driver_t wmt_driver = { .name = "wmt", .methods = wmt_methods, .size = sizeof(struct wmt_softc), }; DRIVER_MODULE(wmt, uhub, wmt_driver, wmt_devclass, NULL, 0); MODULE_DEPEND(wmt, usb, 1, 1, 1); MODULE_DEPEND(wmt, evdev, 1, 1, 1); MODULE_VERSION(wmt, 1); USB_PNP_HOST_INFO(wmt_devs);