Index: head/tests/sys/cddl/zfs/tests/hotspare/hotspare_test.sh
===================================================================
--- head/tests/sys/cddl/zfs/tests/hotspare/hotspare_test.sh	(revision 353116)
+++ head/tests/sys/cddl/zfs/tests/hotspare/hotspare_test.sh	(revision 353117)
@@ -1,760 +1,760 @@
 # CDDL HEADER START
 #
 # The contents of this file are subject to the terms of the
 # Common Development and Distribution License (the "License").
 # You may not use this file except in compliance with the License.
 #
 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 # or http://www.opensolaris.org/os/licensing.
 # See the License for the specific language governing permissions
 # and limitations under the License.
 #
 # When distributing Covered Code, include this CDDL HEADER in each
 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 # If applicable, add the following below this CDDL HEADER, with the
 # fields enclosed by brackets "[]" replaced with your own identifying
 # information: Portions Copyright [yyyy] [name of copyright owner]
 #
 # CDDL HEADER END
 #
 
 # $FreeBSD$
 
 #
 # Copyright 2012 Spectra Logic.  All rights reserved.
 # Use is subject to license terms.
 #
 
 
 atf_test_case hotspare_add_001_pos cleanup
 hotspare_add_001_pos_head()
 {
 	atf_set "descr" "'zpool add <pool> spare <vdev> ...' can add devices to the pool."
 	atf_set "timeout" 3600
 }
 hotspare_add_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_add_001_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_add_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_add_002_pos cleanup
 hotspare_add_002_pos_head()
 {
 	atf_set "descr" "'zpool add <pool> spare <vdev> ...' can add devices to the pool while it has spare-in device."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_add_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_add_002_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_add_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_add_003_neg cleanup
 hotspare_add_003_neg_head()
 {
 	atf_set "descr" "'zpool add [-f]' with hot spares should fail with inapplicable scenarios."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_add_003_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_add_003_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_add_003_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_add_004_neg cleanup
 hotspare_add_004_neg_head()
 {
 	atf_set "descr" "'zpool add [-f]' will not allow a swap device to be used as a hotspare'"
 	atf_set "require.progs"  zpool swapon swapoff swapctl
 }
 hotspare_add_004_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
-	verify_disk_count "$DISKS" 1
+	verify_disk_count "$DISKS" 2
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_add_004_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_add_004_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_clone_001_pos cleanup
 hotspare_clone_001_pos_head()
 {
 	atf_set "descr" "'zpool detach <pool> <vdev> ...' against hotspare should do no harm to clone."
 	atf_set "require.progs"  zfs zpool sum
 	atf_set "timeout" 3600
 }
 hotspare_clone_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_clone_001_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_clone_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_clone_002_pos cleanup
 hotspare_clone_002_pos_head()
 {
 	atf_set "descr" "'zpool detach <pool> <vdev> ...' against basic vdev should do no harm to clone."
 	atf_set "require.progs"  zfs zpool sum
 	atf_set "timeout" 3600
 }
 hotspare_clone_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_clone_002_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_clone_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_create_001_neg cleanup
 hotspare_create_001_neg_head()
 {
 	atf_set "descr" "'zpool create [-f]' with hot spares should be failedwith inapplicable scenarios."
 	atf_set "require.progs"  dumpadm zpool
 	atf_set "timeout" 3600
 }
 hotspare_create_001_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_create_001_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_create_001_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_detach_001_pos cleanup
 hotspare_detach_001_pos_head()
 {
 	atf_set "descr" "'zpool detach <pool> <vdev> ...' should deactivate the spared-in hot spare device successfully."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_detach_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_detach_001_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_detach_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_detach_002_pos cleanup
 hotspare_detach_002_pos_head()
 {
 	atf_set "descr" "'zpool detach <pool> <vdev> ...' against a functioning device that have spared should take the hot spare permanently swapping in successfully."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_detach_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_detach_002_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_detach_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_detach_003_pos cleanup
 hotspare_detach_003_pos_head()
 {
 	atf_set "descr" "'zpool replace <pool> <vdev> <ndev>' against a functioning device that have spared should complete and the hot spare should return to available."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_detach_003_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_detach_003_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_detach_003_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_detach_004_pos cleanup
 hotspare_detach_004_pos_head()
 {
 	atf_set "descr" "'zpool replace <pool> <vdev> <ndev>' against a hot spare device that have been activated should successful while the another dev is a available hot spare."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_detach_004_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_detach_004_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_detach_004_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_detach_005_neg cleanup
 hotspare_detach_005_neg_head()
 {
 	atf_set "descr" "'zpool detach <pool> <vdev>' against a hot spare device that NOT activated should fail and issue an error message."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_detach_005_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_detach_005_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_detach_005_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_export_001_neg cleanup
 hotspare_export_001_neg_head()
 {
 	atf_set "descr" "export pool that using shared hotspares will fail"
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_export_001_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_export_001_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_export_001_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_import_001_pos cleanup
 hotspare_import_001_pos_head()
 {
 	atf_set "descr" "'zpool export/import <pool>' should runs successfully regardless the hotspare is only in list, activated, or offline."
 	atf_set "require.progs"  zpool sum
 	atf_set "timeout" 3600
 }
 hotspare_import_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_import_001_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_import_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_onoffline_003_neg cleanup
 hotspare_onoffline_003_neg_head()
 {
 	atf_set "descr" "'zpool offline/online <pool> <vdev>' should fail on inactive spares"
 	atf_set "require.progs"  zpool zdb
 	atf_set "timeout" 3600
 }
 hotspare_onoffline_003_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_onoffline_003_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_onoffline_003_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_onoffline_004_neg cleanup
 hotspare_onoffline_004_neg_head()
 {
 	atf_set "descr" "'zpool offline/online <pool> <vdev>' against a spared basic vdev during I/O completes."
 	atf_set "require.progs"  zfs zpool zdb
 	atf_set "timeout" 3600
 }
 hotspare_onoffline_004_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_onoffline_004_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_onoffline_004_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_remove_001_pos cleanup
 hotspare_remove_001_pos_head()
 {
 	atf_set "descr" "'zpool remove <pool> <vdev> ...' can remove spare device from the pool."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_remove_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_remove_001_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_remove_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_remove_002_neg cleanup
 hotspare_remove_002_neg_head()
 {
 	atf_set "descr" "'zpool remove <pool> <vdev> ...' should fail with inapplicable scenarios."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_remove_002_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_remove_002_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_remove_002_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_remove_003_neg cleanup
 hotspare_remove_003_neg_head()
 {
 	atf_set "descr" "Executing 'zpool remove' with bad options fails"
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_remove_003_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_remove_003_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_remove_003_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_remove_004_pos cleanup
 hotspare_remove_004_pos_head()
 {
 	atf_set "descr" "'zpool remove <pool> <vdev> ...' can remove spare device from the pool."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_remove_004_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_remove_004_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_remove_004_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_replace_001_neg cleanup
 hotspare_replace_001_neg_head()
 {
 	atf_set "descr" "'zpool replace <pool> <odev> <ndev>' should fail with inapplicable scenarios."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_replace_001_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_replace_001_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_replace_001_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_replace_002_neg cleanup
 hotspare_replace_002_neg_head()
 {
 	atf_set "descr" "'zpool replace <pool> <odev> <ndev>' should fail while the hot spares smaller than the basic vdev."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_replace_002_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_replace_002_neg.ksh || atf_fail "Testcase failed"
 }
 hotspare_replace_002_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_scrub_001_pos cleanup
 hotspare_scrub_001_pos_head()
 {
 	atf_set "descr" "'zpool scrub <pool>' should runs successfully regardlessthe hotspare is only in list or activated."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_scrub_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_scrub_001_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_scrub_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_scrub_002_pos cleanup
 hotspare_scrub_002_pos_head()
 {
 	atf_set "descr" "'zpool scrub' scans spare vdevs"
 	atf_set "require.progs"  zpool
 }
 hotspare_scrub_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_scrub_002_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_scrub_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_shared_001_pos cleanup
 hotspare_shared_001_pos_head()
 {
 	atf_set "descr" "'zpool add <pool> spare <vdev> ...' can add a disk as a shared spare to multiple pools."
 	atf_set "require.progs"  zpool
 	atf_set "timeout" 3600
 }
 hotspare_shared_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_shared_001_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_shared_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_snapshot_001_pos cleanup
 hotspare_snapshot_001_pos_head()
 {
 	atf_set "descr" "'zpool detach <pool> <vdev> ...' against hotspare should do no harm to snapshot."
 	atf_set "require.progs"  zfs zpool sum
 	atf_set "timeout" 3600
 }
 hotspare_snapshot_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_snapshot_001_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_snapshot_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case hotspare_snapshot_002_pos cleanup
 hotspare_snapshot_002_pos_head()
 {
 	atf_set "descr" "'zpool detach <pool> <vdev> ...' against basic vdev do no harm to snapshot."
 	atf_set "require.progs"  zfs zpool sum
 	atf_set "timeout" 3600
 }
 hotspare_snapshot_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/hotspare_snapshot_002_pos.ksh || atf_fail "Testcase failed"
 }
 hotspare_snapshot_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/hotspare.kshlib
 	. $(atf_get_srcdir)/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_init_test_cases()
 {
 
 	atf_add_test_case hotspare_add_001_pos
 	atf_add_test_case hotspare_add_002_pos
 	atf_add_test_case hotspare_add_003_neg
 	atf_add_test_case hotspare_add_004_neg
 	atf_add_test_case hotspare_clone_001_pos
 	atf_add_test_case hotspare_clone_002_pos
 	atf_add_test_case hotspare_create_001_neg
 	atf_add_test_case hotspare_detach_001_pos
 	atf_add_test_case hotspare_detach_002_pos
 	atf_add_test_case hotspare_detach_003_pos
 	atf_add_test_case hotspare_detach_004_pos
 	atf_add_test_case hotspare_detach_005_neg
 	atf_add_test_case hotspare_export_001_neg
 	atf_add_test_case hotspare_import_001_pos
 	atf_add_test_case hotspare_onoffline_003_neg
 	atf_add_test_case hotspare_onoffline_004_neg
 	atf_add_test_case hotspare_remove_001_pos
 	atf_add_test_case hotspare_remove_002_neg
 	atf_add_test_case hotspare_remove_003_neg
 	atf_add_test_case hotspare_remove_004_pos
 	atf_add_test_case hotspare_replace_001_neg
 	atf_add_test_case hotspare_replace_002_neg
 	atf_add_test_case hotspare_scrub_001_pos
 	atf_add_test_case hotspare_scrub_002_pos
 	atf_add_test_case hotspare_shared_001_pos
 	atf_add_test_case hotspare_snapshot_001_pos
 	atf_add_test_case hotspare_snapshot_002_pos
 }