Index: head/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c (revision 350496) @@ -1,7174 +1,7175 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011-2012 Pawel Jakub Dawidek. All rights reserved. * Copyright 2013 Martin Matuska . All rights reserved. * Copyright 2014 Xin Li . All rights reserved. * Copyright 2015, OmniTI Computer Consulting, Inc. All rights reserved. * Copyright 2015 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2014, 2016 Joyent, Inc. All rights reserved. * Copyright (c) 2011, 2017 by Delphix. All rights reserved. * Copyright (c) 2013 by Saso Kiselkov. All rights reserved. * Copyright (c) 2013 Steven Hartland. All rights reserved. * Copyright (c) 2014 Integros [integros.com] * Copyright 2016 Toomas Soome * Copyright 2017 RackTop Systems. * Copyright (c) 2017 Datto Inc. */ /* * ZFS ioctls. * * This file handles the ioctls to /dev/zfs, used for configuring ZFS storage * pools and filesystems, e.g. with /sbin/zfs and /sbin/zpool. * * There are two ways that we handle ioctls: the legacy way where almost * all of the logic is in the ioctl callback, and the new way where most * of the marshalling is handled in the common entry point, zfsdev_ioctl(). * * Non-legacy ioctls should be registered by calling * zfs_ioctl_register() from zfs_ioctl_init(). The ioctl is invoked * from userland by lzc_ioctl(). * * The registration arguments are as follows: * * const char *name * The name of the ioctl. This is used for history logging. If the * ioctl returns successfully (the callback returns 0), and allow_log * is true, then a history log entry will be recorded with the input & * output nvlists. The log entry can be printed with "zpool history -i". * * zfs_ioc_t ioc * The ioctl request number, which userland will pass to ioctl(2). * The ioctl numbers can change from release to release, because * the caller (libzfs) must be matched to the kernel. * * zfs_secpolicy_func_t *secpolicy * This function will be called before the zfs_ioc_func_t, to * determine if this operation is permitted. It should return EPERM * on failure, and 0 on success. Checks include determining if the * dataset is visible in this zone, and if the user has either all * zfs privileges in the zone (SYS_MOUNT), or has been granted permission * to do this operation on this dataset with "zfs allow". * * zfs_ioc_namecheck_t namecheck * This specifies what to expect in the zfs_cmd_t:zc_name -- a pool * name, a dataset name, or nothing. If the name is not well-formed, * the ioctl will fail and the callback will not be called. * Therefore, the callback can assume that the name is well-formed * (e.g. is null-terminated, doesn't have more than one '@' character, * doesn't have invalid characters). * * zfs_ioc_poolcheck_t pool_check * This specifies requirements on the pool state. If the pool does * not meet them (is suspended or is readonly), the ioctl will fail * and the callback will not be called. If any checks are specified * (i.e. it is not POOL_CHECK_NONE), namecheck must not be NO_NAME. * Multiple checks can be or-ed together (e.g. POOL_CHECK_SUSPENDED | * POOL_CHECK_READONLY). * * boolean_t smush_outnvlist * If smush_outnvlist is true, then the output is presumed to be a * list of errors, and it will be "smushed" down to fit into the * caller's buffer, by removing some entries and replacing them with a * single "N_MORE_ERRORS" entry indicating how many were removed. See * nvlist_smush() for details. If smush_outnvlist is false, and the * outnvlist does not fit into the userland-provided buffer, then the * ioctl will fail with ENOMEM. * * zfs_ioc_func_t *func * The callback function that will perform the operation. * * The callback should return 0 on success, or an error number on * failure. If the function fails, the userland ioctl will return -1, * and errno will be set to the callback's return value. The callback * will be called with the following arguments: * * const char *name * The name of the pool or dataset to operate on, from * zfs_cmd_t:zc_name. The 'namecheck' argument specifies the * expected type (pool, dataset, or none). * * nvlist_t *innvl * The input nvlist, deserialized from zfs_cmd_t:zc_nvlist_src. Or * NULL if no input nvlist was provided. Changes to this nvlist are * ignored. If the input nvlist could not be deserialized, the * ioctl will fail and the callback will not be called. * * nvlist_t *outnvl * The output nvlist, initially empty. The callback can fill it in, * and it will be returned to userland by serializing it into * zfs_cmd_t:zc_nvlist_dst. If it is non-empty, and serialization * fails (e.g. because the caller didn't supply a large enough * buffer), then the overall ioctl will fail. See the * 'smush_nvlist' argument above for additional behaviors. * * There are two typical uses of the output nvlist: * - To return state, e.g. property values. In this case, * smush_outnvlist should be false. If the buffer was not large * enough, the caller will reallocate a larger buffer and try * the ioctl again. * * - To return multiple errors from an ioctl which makes on-disk * changes. In this case, smush_outnvlist should be true. * Ioctls which make on-disk modifications should generally not * use the outnvl if they succeed, because the caller can not * distinguish between the operation failing, and * deserialization failing. */ #ifdef __FreeBSD__ #include "opt_kstack_pages.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zfs_namecheck.h" #include "zfs_prop.h" #include "zfs_deleg.h" #include "zfs_comutil.h" #include "zfs_ioctl_compat.h" #include "lua.h" #include "lauxlib.h" static struct cdev *zfsdev; extern void zfs_init(void); extern void zfs_fini(void); uint_t zfs_fsyncer_key; extern uint_t rrw_tsd_key; static uint_t zfs_allow_log_key; extern uint_t zfs_geom_probe_vdev_key; typedef int zfs_ioc_legacy_func_t(zfs_cmd_t *); typedef int zfs_ioc_func_t(const char *, nvlist_t *, nvlist_t *); typedef int zfs_secpolicy_func_t(zfs_cmd_t *, nvlist_t *, cred_t *); typedef enum { NO_NAME, POOL_NAME, DATASET_NAME } zfs_ioc_namecheck_t; typedef enum { POOL_CHECK_NONE = 1 << 0, POOL_CHECK_SUSPENDED = 1 << 1, POOL_CHECK_READONLY = 1 << 2, } zfs_ioc_poolcheck_t; typedef struct zfs_ioc_vec { zfs_ioc_legacy_func_t *zvec_legacy_func; zfs_ioc_func_t *zvec_func; zfs_secpolicy_func_t *zvec_secpolicy; zfs_ioc_namecheck_t zvec_namecheck; boolean_t zvec_allow_log; zfs_ioc_poolcheck_t zvec_pool_check; boolean_t zvec_smush_outnvlist; const char *zvec_name; } zfs_ioc_vec_t; /* This array is indexed by zfs_userquota_prop_t */ static const char *userquota_perms[] = { ZFS_DELEG_PERM_USERUSED, ZFS_DELEG_PERM_USERQUOTA, ZFS_DELEG_PERM_GROUPUSED, ZFS_DELEG_PERM_GROUPQUOTA, }; static int zfs_ioc_userspace_upgrade(zfs_cmd_t *zc); static int zfs_check_settable(const char *name, nvpair_t *property, cred_t *cr); static int zfs_check_clearable(char *dataset, nvlist_t *props, nvlist_t **errors); static int zfs_fill_zplprops_root(uint64_t, nvlist_t *, nvlist_t *, boolean_t *); int zfs_set_prop_nvlist(const char *, zprop_source_t, nvlist_t *, nvlist_t *); static int get_nvlist(uint64_t nvl, uint64_t size, int iflag, nvlist_t **nvp); static void zfsdev_close(void *data); static int zfs_prop_activate_feature(spa_t *spa, spa_feature_t feature); /* _NOTE(PRINTFLIKE(4)) - this is printf-like, but lint is too whiney */ void __dprintf(const char *file, const char *func, int line, const char *fmt, ...) { const char *newfile; char buf[512]; va_list adx; /* * Get rid of annoying "../common/" prefix to filename. */ newfile = strrchr(file, '/'); if (newfile != NULL) { newfile = newfile + 1; /* Get rid of leading / */ } else { newfile = file; } va_start(adx, fmt); (void) vsnprintf(buf, sizeof (buf), fmt, adx); va_end(adx); /* * To get this data, use the zfs-dprintf probe as so: * dtrace -q -n 'zfs-dprintf \ * /stringof(arg0) == "dbuf.c"/ \ * {printf("%s: %s", stringof(arg1), stringof(arg3))}' * arg0 = file name * arg1 = function name * arg2 = line number * arg3 = message */ DTRACE_PROBE4(zfs__dprintf, char *, newfile, char *, func, int, line, char *, buf); } static void history_str_free(char *buf) { kmem_free(buf, HIS_MAX_RECORD_LEN); } static char * history_str_get(zfs_cmd_t *zc) { char *buf; if (zc->zc_history == 0) return (NULL); buf = kmem_alloc(HIS_MAX_RECORD_LEN, KM_SLEEP); if (copyinstr((void *)(uintptr_t)zc->zc_history, buf, HIS_MAX_RECORD_LEN, NULL) != 0) { history_str_free(buf); return (NULL); } buf[HIS_MAX_RECORD_LEN -1] = '\0'; return (buf); } /* * Check to see if the named dataset is currently defined as bootable */ static boolean_t zfs_is_bootfs(const char *name) { objset_t *os; if (dmu_objset_hold(name, FTAG, &os) == 0) { boolean_t ret; ret = (dmu_objset_id(os) == spa_bootfs(dmu_objset_spa(os))); dmu_objset_rele(os, FTAG); return (ret); } return (B_FALSE); } /* * Return non-zero if the spa version is less than requested version. */ static int zfs_earlier_version(const char *name, int version) { spa_t *spa; if (spa_open(name, &spa, FTAG) == 0) { if (spa_version(spa) < version) { spa_close(spa, FTAG); return (1); } spa_close(spa, FTAG); } return (0); } /* * Return TRUE if the ZPL version is less than requested version. */ static boolean_t zpl_earlier_version(const char *name, int version) { objset_t *os; boolean_t rc = B_TRUE; if (dmu_objset_hold(name, FTAG, &os) == 0) { uint64_t zplversion; if (dmu_objset_type(os) != DMU_OST_ZFS) { dmu_objset_rele(os, FTAG); return (B_TRUE); } /* XXX reading from non-owned objset */ if (zfs_get_zplprop(os, ZFS_PROP_VERSION, &zplversion) == 0) rc = zplversion < version; dmu_objset_rele(os, FTAG); } return (rc); } static void zfs_log_history(zfs_cmd_t *zc) { spa_t *spa; char *buf; if ((buf = history_str_get(zc)) == NULL) return; if (spa_open(zc->zc_name, &spa, FTAG) == 0) { if (spa_version(spa) >= SPA_VERSION_ZPOOL_HISTORY) (void) spa_history_log(spa, buf); spa_close(spa, FTAG); } history_str_free(buf); } /* * Policy for top-level read operations (list pools). Requires no privileges, * and can be used in the local zone, as there is no associated dataset. */ /* ARGSUSED */ static int zfs_secpolicy_none(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { return (0); } /* * Policy for dataset read operations (list children, get statistics). Requires * no privileges, but must be visible in the local zone. */ /* ARGSUSED */ static int zfs_secpolicy_read(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { if (INGLOBALZONE(curthread) || zone_dataset_visible(zc->zc_name, NULL)) return (0); return (SET_ERROR(ENOENT)); } static int zfs_dozonecheck_impl(const char *dataset, uint64_t zoned, cred_t *cr) { int writable = 1; /* * The dataset must be visible by this zone -- check this first * so they don't see EPERM on something they shouldn't know about. */ if (!INGLOBALZONE(curthread) && !zone_dataset_visible(dataset, &writable)) return (SET_ERROR(ENOENT)); if (INGLOBALZONE(curthread)) { /* * If the fs is zoned, only root can access it from the * global zone. */ if (secpolicy_zfs(cr) && zoned) return (SET_ERROR(EPERM)); } else { /* * If we are in a local zone, the 'zoned' property must be set. */ if (!zoned) return (SET_ERROR(EPERM)); /* must be writable by this zone */ if (!writable) return (SET_ERROR(EPERM)); } return (0); } static int zfs_dozonecheck(const char *dataset, cred_t *cr) { uint64_t zoned; if (dsl_prop_get_integer(dataset, "jailed", &zoned, NULL)) return (SET_ERROR(ENOENT)); return (zfs_dozonecheck_impl(dataset, zoned, cr)); } static int zfs_dozonecheck_ds(const char *dataset, dsl_dataset_t *ds, cred_t *cr) { uint64_t zoned; if (dsl_prop_get_int_ds(ds, "jailed", &zoned)) return (SET_ERROR(ENOENT)); return (zfs_dozonecheck_impl(dataset, zoned, cr)); } static int zfs_secpolicy_write_perms_ds(const char *name, dsl_dataset_t *ds, const char *perm, cred_t *cr) { int error; error = zfs_dozonecheck_ds(name, ds, cr); if (error == 0) { error = secpolicy_zfs(cr); if (error != 0) error = dsl_deleg_access_impl(ds, perm, cr); } return (error); } static int zfs_secpolicy_write_perms(const char *name, const char *perm, cred_t *cr) { int error; dsl_dataset_t *ds; dsl_pool_t *dp; /* * First do a quick check for root in the global zone, which * is allowed to do all write_perms. This ensures that zfs_ioc_* * will get to handle nonexistent datasets. */ if (INGLOBALZONE(curthread) && secpolicy_zfs(cr) == 0) return (0); error = dsl_pool_hold(name, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold(dp, name, FTAG, &ds); if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } error = zfs_secpolicy_write_perms_ds(name, ds, perm, cr); dsl_dataset_rele(ds, FTAG); dsl_pool_rele(dp, FTAG); return (error); } #ifdef SECLABEL /* * Policy for setting the security label property. * * Returns 0 for success, non-zero for access and other errors. */ static int zfs_set_slabel_policy(const char *name, char *strval, cred_t *cr) { char ds_hexsl[MAXNAMELEN]; bslabel_t ds_sl, new_sl; boolean_t new_default = FALSE; uint64_t zoned; int needed_priv = -1; int error; /* First get the existing dataset label. */ error = dsl_prop_get(name, zfs_prop_to_name(ZFS_PROP_MLSLABEL), 1, sizeof (ds_hexsl), &ds_hexsl, NULL); if (error != 0) return (SET_ERROR(EPERM)); if (strcasecmp(strval, ZFS_MLSLABEL_DEFAULT) == 0) new_default = TRUE; /* The label must be translatable */ if (!new_default && (hexstr_to_label(strval, &new_sl) != 0)) return (SET_ERROR(EINVAL)); /* * In a non-global zone, disallow attempts to set a label that * doesn't match that of the zone; otherwise no other checks * are needed. */ if (!INGLOBALZONE(curproc)) { if (new_default || !blequal(&new_sl, CR_SL(CRED()))) return (SET_ERROR(EPERM)); return (0); } /* * For global-zone datasets (i.e., those whose zoned property is * "off", verify that the specified new label is valid for the * global zone. */ if (dsl_prop_get_integer(name, zfs_prop_to_name(ZFS_PROP_ZONED), &zoned, NULL)) return (SET_ERROR(EPERM)); if (!zoned) { if (zfs_check_global_label(name, strval) != 0) return (SET_ERROR(EPERM)); } /* * If the existing dataset label is nondefault, check if the * dataset is mounted (label cannot be changed while mounted). * Get the zfsvfs; if there isn't one, then the dataset isn't * mounted (or isn't a dataset, doesn't exist, ...). */ if (strcasecmp(ds_hexsl, ZFS_MLSLABEL_DEFAULT) != 0) { objset_t *os; static char *setsl_tag = "setsl_tag"; /* * Try to own the dataset; abort if there is any error, * (e.g., already mounted, in use, or other error). */ error = dmu_objset_own(name, DMU_OST_ZFS, B_TRUE, setsl_tag, &os); if (error != 0) return (SET_ERROR(EPERM)); dmu_objset_disown(os, setsl_tag); if (new_default) { needed_priv = PRIV_FILE_DOWNGRADE_SL; goto out_check; } if (hexstr_to_label(strval, &new_sl) != 0) return (SET_ERROR(EPERM)); if (blstrictdom(&ds_sl, &new_sl)) needed_priv = PRIV_FILE_DOWNGRADE_SL; else if (blstrictdom(&new_sl, &ds_sl)) needed_priv = PRIV_FILE_UPGRADE_SL; } else { /* dataset currently has a default label */ if (!new_default) needed_priv = PRIV_FILE_UPGRADE_SL; } out_check: if (needed_priv != -1) return (PRIV_POLICY(cr, needed_priv, B_FALSE, EPERM, NULL)); return (0); } #endif /* SECLABEL */ static int zfs_secpolicy_setprop(const char *dsname, zfs_prop_t prop, nvpair_t *propval, cred_t *cr) { char *strval; /* * Check permissions for special properties. */ switch (prop) { case ZFS_PROP_ZONED: /* * Disallow setting of 'zoned' from within a local zone. */ if (!INGLOBALZONE(curthread)) return (SET_ERROR(EPERM)); break; case ZFS_PROP_QUOTA: case ZFS_PROP_FILESYSTEM_LIMIT: case ZFS_PROP_SNAPSHOT_LIMIT: if (!INGLOBALZONE(curthread)) { uint64_t zoned; char setpoint[ZFS_MAX_DATASET_NAME_LEN]; /* * Unprivileged users are allowed to modify the * limit on things *under* (ie. contained by) * the thing they own. */ if (dsl_prop_get_integer(dsname, "jailed", &zoned, setpoint)) return (SET_ERROR(EPERM)); if (!zoned || strlen(dsname) <= strlen(setpoint)) return (SET_ERROR(EPERM)); } break; case ZFS_PROP_MLSLABEL: #ifdef SECLABEL if (!is_system_labeled()) return (SET_ERROR(EPERM)); if (nvpair_value_string(propval, &strval) == 0) { int err; err = zfs_set_slabel_policy(dsname, strval, CRED()); if (err != 0) return (err); } #else return (EOPNOTSUPP); #endif break; } return (zfs_secpolicy_write_perms(dsname, zfs_prop_to_name(prop), cr)); } /* ARGSUSED */ static int zfs_secpolicy_set_fsacl(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { int error; error = zfs_dozonecheck(zc->zc_name, cr); if (error != 0) return (error); /* * permission to set permissions will be evaluated later in * dsl_deleg_can_allow() */ return (0); } /* ARGSUSED */ static int zfs_secpolicy_rollback(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { return (zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_ROLLBACK, cr)); } /* ARGSUSED */ static int zfs_secpolicy_send(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { dsl_pool_t *dp; dsl_dataset_t *ds; char *cp; int error; /* * Generate the current snapshot name from the given objsetid, then * use that name for the secpolicy/zone checks. */ cp = strchr(zc->zc_name, '@'); if (cp == NULL) return (SET_ERROR(EINVAL)); error = dsl_pool_hold(zc->zc_name, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold_obj(dp, zc->zc_sendobj, FTAG, &ds); if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } dsl_dataset_name(ds, zc->zc_name); error = zfs_secpolicy_write_perms_ds(zc->zc_name, ds, ZFS_DELEG_PERM_SEND, cr); dsl_dataset_rele(ds, FTAG); dsl_pool_rele(dp, FTAG); return (error); } /* ARGSUSED */ static int zfs_secpolicy_send_new(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { return (zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_SEND, cr)); } /* ARGSUSED */ static int zfs_secpolicy_deleg_share(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { vnode_t *vp; int error; if ((error = lookupname(zc->zc_value, UIO_SYSSPACE, NO_FOLLOW, NULL, &vp)) != 0) return (error); /* Now make sure mntpnt and dataset are ZFS */ if (strcmp(vp->v_vfsp->mnt_stat.f_fstypename, "zfs") != 0 || (strcmp((char *)refstr_value(vp->v_vfsp->vfs_resource), zc->zc_name) != 0)) { VN_RELE(vp); return (SET_ERROR(EPERM)); } VN_RELE(vp); return (dsl_deleg_access(zc->zc_name, ZFS_DELEG_PERM_SHARE, cr)); } int zfs_secpolicy_share(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { if (!INGLOBALZONE(curthread)) return (SET_ERROR(EPERM)); if (secpolicy_nfs(cr) == 0) { return (0); } else { return (zfs_secpolicy_deleg_share(zc, innvl, cr)); } } int zfs_secpolicy_smb_acl(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { if (!INGLOBALZONE(curthread)) return (SET_ERROR(EPERM)); if (secpolicy_smb(cr) == 0) { return (0); } else { return (zfs_secpolicy_deleg_share(zc, innvl, cr)); } } static int zfs_get_parent(const char *datasetname, char *parent, int parentsize) { char *cp; /* * Remove the @bla or /bla from the end of the name to get the parent. */ (void) strncpy(parent, datasetname, parentsize); cp = strrchr(parent, '@'); if (cp != NULL) { cp[0] = '\0'; } else { cp = strrchr(parent, '/'); if (cp == NULL) return (SET_ERROR(ENOENT)); cp[0] = '\0'; } return (0); } int zfs_secpolicy_destroy_perms(const char *name, cred_t *cr) { int error; if ((error = zfs_secpolicy_write_perms(name, ZFS_DELEG_PERM_MOUNT, cr)) != 0) return (error); return (zfs_secpolicy_write_perms(name, ZFS_DELEG_PERM_DESTROY, cr)); } /* ARGSUSED */ static int zfs_secpolicy_destroy(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { return (zfs_secpolicy_destroy_perms(zc->zc_name, cr)); } /* * Destroying snapshots with delegated permissions requires * descendant mount and destroy permissions. */ /* ARGSUSED */ static int zfs_secpolicy_destroy_snaps(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { nvlist_t *snaps; nvpair_t *pair, *nextpair; int error = 0; if (nvlist_lookup_nvlist(innvl, "snaps", &snaps) != 0) return (SET_ERROR(EINVAL)); for (pair = nvlist_next_nvpair(snaps, NULL); pair != NULL; pair = nextpair) { nextpair = nvlist_next_nvpair(snaps, pair); error = zfs_secpolicy_destroy_perms(nvpair_name(pair), cr); if (error == ENOENT) { /* * Ignore any snapshots that don't exist (we consider * them "already destroyed"). Remove the name from the * nvl here in case the snapshot is created between * now and when we try to destroy it (in which case * we don't want to destroy it since we haven't * checked for permission). */ fnvlist_remove_nvpair(snaps, pair); error = 0; } if (error != 0) break; } return (error); } int zfs_secpolicy_rename_perms(const char *from, const char *to, cred_t *cr) { char parentname[ZFS_MAX_DATASET_NAME_LEN]; int error; if ((error = zfs_secpolicy_write_perms(from, ZFS_DELEG_PERM_RENAME, cr)) != 0) return (error); if ((error = zfs_secpolicy_write_perms(from, ZFS_DELEG_PERM_MOUNT, cr)) != 0) return (error); if ((error = zfs_get_parent(to, parentname, sizeof (parentname))) != 0) return (error); if ((error = zfs_secpolicy_write_perms(parentname, ZFS_DELEG_PERM_CREATE, cr)) != 0) return (error); if ((error = zfs_secpolicy_write_perms(parentname, ZFS_DELEG_PERM_MOUNT, cr)) != 0) return (error); return (error); } /* ARGSUSED */ static int zfs_secpolicy_rename(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { char *at = NULL; int error; if ((zc->zc_cookie & 1) != 0) { /* * This is recursive rename, so the starting snapshot might * not exist. Check file system or volume permission instead. */ at = strchr(zc->zc_name, '@'); if (at == NULL) return (EINVAL); *at = '\0'; } error = zfs_secpolicy_rename_perms(zc->zc_name, zc->zc_value, cr); if (at != NULL) *at = '@'; return (error); } /* ARGSUSED */ static int zfs_secpolicy_promote(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { dsl_pool_t *dp; dsl_dataset_t *clone; int error; error = zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_PROMOTE, cr); if (error != 0) return (error); error = dsl_pool_hold(zc->zc_name, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold(dp, zc->zc_name, FTAG, &clone); if (error == 0) { char parentname[ZFS_MAX_DATASET_NAME_LEN]; dsl_dataset_t *origin = NULL; dsl_dir_t *dd; dd = clone->ds_dir; error = dsl_dataset_hold_obj(dd->dd_pool, dsl_dir_phys(dd)->dd_origin_obj, FTAG, &origin); if (error != 0) { dsl_dataset_rele(clone, FTAG); dsl_pool_rele(dp, FTAG); return (error); } error = zfs_secpolicy_write_perms_ds(zc->zc_name, clone, ZFS_DELEG_PERM_MOUNT, cr); dsl_dataset_name(origin, parentname); if (error == 0) { error = zfs_secpolicy_write_perms_ds(parentname, origin, ZFS_DELEG_PERM_PROMOTE, cr); } dsl_dataset_rele(clone, FTAG); dsl_dataset_rele(origin, FTAG); } dsl_pool_rele(dp, FTAG); return (error); } /* ARGSUSED */ static int zfs_secpolicy_recv(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { int error; if ((error = zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_RECEIVE, cr)) != 0) return (error); if ((error = zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_MOUNT, cr)) != 0) return (error); return (zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_CREATE, cr)); } int zfs_secpolicy_snapshot_perms(const char *name, cred_t *cr) { return (zfs_secpolicy_write_perms(name, ZFS_DELEG_PERM_SNAPSHOT, cr)); } /* * Check for permission to create each snapshot in the nvlist. */ /* ARGSUSED */ static int zfs_secpolicy_snapshot(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { nvlist_t *snaps; int error; nvpair_t *pair; if (nvlist_lookup_nvlist(innvl, "snaps", &snaps) != 0) return (SET_ERROR(EINVAL)); for (pair = nvlist_next_nvpair(snaps, NULL); pair != NULL; pair = nvlist_next_nvpair(snaps, pair)) { char *name = nvpair_name(pair); char *atp = strchr(name, '@'); if (atp == NULL) { error = SET_ERROR(EINVAL); break; } *atp = '\0'; error = zfs_secpolicy_snapshot_perms(name, cr); *atp = '@'; if (error != 0) break; } return (error); } /* * Check for permission to create each snapshot in the nvlist. */ /* ARGSUSED */ static int zfs_secpolicy_bookmark(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { int error = 0; for (nvpair_t *pair = nvlist_next_nvpair(innvl, NULL); pair != NULL; pair = nvlist_next_nvpair(innvl, pair)) { char *name = nvpair_name(pair); char *hashp = strchr(name, '#'); if (hashp == NULL) { error = SET_ERROR(EINVAL); break; } *hashp = '\0'; error = zfs_secpolicy_write_perms(name, ZFS_DELEG_PERM_BOOKMARK, cr); *hashp = '#'; if (error != 0) break; } return (error); } /* ARGSUSED */ static int zfs_secpolicy_remap(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { return (zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_REMAP, cr)); } /* ARGSUSED */ static int zfs_secpolicy_destroy_bookmarks(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { nvpair_t *pair, *nextpair; int error = 0; for (pair = nvlist_next_nvpair(innvl, NULL); pair != NULL; pair = nextpair) { char *name = nvpair_name(pair); char *hashp = strchr(name, '#'); nextpair = nvlist_next_nvpair(innvl, pair); if (hashp == NULL) { error = SET_ERROR(EINVAL); break; } *hashp = '\0'; error = zfs_secpolicy_write_perms(name, ZFS_DELEG_PERM_DESTROY, cr); *hashp = '#'; if (error == ENOENT) { /* * Ignore any filesystems that don't exist (we consider * their bookmarks "already destroyed"). Remove * the name from the nvl here in case the filesystem * is created between now and when we try to destroy * the bookmark (in which case we don't want to * destroy it since we haven't checked for permission). */ fnvlist_remove_nvpair(innvl, pair); error = 0; } if (error != 0) break; } return (error); } /* ARGSUSED */ static int zfs_secpolicy_log_history(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { /* * Even root must have a proper TSD so that we know what pool * to log to. */ if (tsd_get(zfs_allow_log_key) == NULL) return (SET_ERROR(EPERM)); return (0); } static int zfs_secpolicy_create_clone(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { char parentname[ZFS_MAX_DATASET_NAME_LEN]; int error; char *origin; if ((error = zfs_get_parent(zc->zc_name, parentname, sizeof (parentname))) != 0) return (error); if (nvlist_lookup_string(innvl, "origin", &origin) == 0 && (error = zfs_secpolicy_write_perms(origin, ZFS_DELEG_PERM_CLONE, cr)) != 0) return (error); if ((error = zfs_secpolicy_write_perms(parentname, ZFS_DELEG_PERM_CREATE, cr)) != 0) return (error); return (zfs_secpolicy_write_perms(parentname, ZFS_DELEG_PERM_MOUNT, cr)); } /* * Policy for pool operations - create/destroy pools, add vdevs, etc. Requires * SYS_CONFIG privilege, which is not available in a local zone. */ /* ARGSUSED */ static int zfs_secpolicy_config(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { if (secpolicy_sys_config(cr, B_FALSE) != 0) return (SET_ERROR(EPERM)); return (0); } /* * Policy for object to name lookups. */ /* ARGSUSED */ static int zfs_secpolicy_diff(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { int error; if ((error = secpolicy_sys_config(cr, B_FALSE)) == 0) return (0); error = zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_DIFF, cr); return (error); } /* * Policy for fault injection. Requires all privileges. */ /* ARGSUSED */ static int zfs_secpolicy_inject(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { return (secpolicy_zinject(cr)); } /* ARGSUSED */ static int zfs_secpolicy_inherit_prop(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { zfs_prop_t prop = zfs_name_to_prop(zc->zc_value); if (prop == ZPROP_INVAL) { if (!zfs_prop_user(zc->zc_value)) return (SET_ERROR(EINVAL)); return (zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_USERPROP, cr)); } else { return (zfs_secpolicy_setprop(zc->zc_name, prop, NULL, cr)); } } static int zfs_secpolicy_userspace_one(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { int err = zfs_secpolicy_read(zc, innvl, cr); if (err) return (err); if (zc->zc_objset_type >= ZFS_NUM_USERQUOTA_PROPS) return (SET_ERROR(EINVAL)); if (zc->zc_value[0] == 0) { /* * They are asking about a posix uid/gid. If it's * themself, allow it. */ if (zc->zc_objset_type == ZFS_PROP_USERUSED || zc->zc_objset_type == ZFS_PROP_USERQUOTA) { if (zc->zc_guid == crgetuid(cr)) return (0); } else { if (groupmember(zc->zc_guid, cr)) return (0); } } return (zfs_secpolicy_write_perms(zc->zc_name, userquota_perms[zc->zc_objset_type], cr)); } static int zfs_secpolicy_userspace_many(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { int err = zfs_secpolicy_read(zc, innvl, cr); if (err) return (err); if (zc->zc_objset_type >= ZFS_NUM_USERQUOTA_PROPS) return (SET_ERROR(EINVAL)); return (zfs_secpolicy_write_perms(zc->zc_name, userquota_perms[zc->zc_objset_type], cr)); } /* ARGSUSED */ static int zfs_secpolicy_userspace_upgrade(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { return (zfs_secpolicy_setprop(zc->zc_name, ZFS_PROP_VERSION, NULL, cr)); } /* ARGSUSED */ static int zfs_secpolicy_hold(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { nvpair_t *pair; nvlist_t *holds; int error; error = nvlist_lookup_nvlist(innvl, "holds", &holds); if (error != 0) return (SET_ERROR(EINVAL)); for (pair = nvlist_next_nvpair(holds, NULL); pair != NULL; pair = nvlist_next_nvpair(holds, pair)) { char fsname[ZFS_MAX_DATASET_NAME_LEN]; error = dmu_fsname(nvpair_name(pair), fsname); if (error != 0) return (error); error = zfs_secpolicy_write_perms(fsname, ZFS_DELEG_PERM_HOLD, cr); if (error != 0) return (error); } return (0); } /* ARGSUSED */ static int zfs_secpolicy_release(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { nvpair_t *pair; int error; for (pair = nvlist_next_nvpair(innvl, NULL); pair != NULL; pair = nvlist_next_nvpair(innvl, pair)) { char fsname[ZFS_MAX_DATASET_NAME_LEN]; error = dmu_fsname(nvpair_name(pair), fsname); if (error != 0) return (error); error = zfs_secpolicy_write_perms(fsname, ZFS_DELEG_PERM_RELEASE, cr); if (error != 0) return (error); } return (0); } /* * Policy for allowing temporary snapshots to be taken or released */ static int zfs_secpolicy_tmp_snapshot(zfs_cmd_t *zc, nvlist_t *innvl, cred_t *cr) { /* * A temporary snapshot is the same as a snapshot, * hold, destroy and release all rolled into one. * Delegated diff alone is sufficient that we allow this. */ int error; if ((error = zfs_secpolicy_write_perms(zc->zc_name, ZFS_DELEG_PERM_DIFF, cr)) == 0) return (0); error = zfs_secpolicy_snapshot_perms(zc->zc_name, cr); if (error == 0) error = zfs_secpolicy_hold(zc, innvl, cr); if (error == 0) error = zfs_secpolicy_release(zc, innvl, cr); if (error == 0) error = zfs_secpolicy_destroy(zc, innvl, cr); return (error); } /* * Returns the nvlist as specified by the user in the zfs_cmd_t. */ static int get_nvlist(uint64_t nvl, uint64_t size, int iflag, nvlist_t **nvp) { char *packed; int error; nvlist_t *list = NULL; /* * Read in and unpack the user-supplied nvlist. */ if (size == 0) return (SET_ERROR(EINVAL)); packed = kmem_alloc(size, KM_SLEEP); if ((error = ddi_copyin((void *)(uintptr_t)nvl, packed, size, iflag)) != 0) { kmem_free(packed, size); return (SET_ERROR(EFAULT)); } if ((error = nvlist_unpack(packed, size, &list, 0)) != 0) { kmem_free(packed, size); return (error); } kmem_free(packed, size); *nvp = list; return (0); } /* * Reduce the size of this nvlist until it can be serialized in 'max' bytes. * Entries will be removed from the end of the nvlist, and one int32 entry * named "N_MORE_ERRORS" will be added indicating how many entries were * removed. */ static int nvlist_smush(nvlist_t *errors, size_t max) { size_t size; size = fnvlist_size(errors); if (size > max) { nvpair_t *more_errors; int n = 0; if (max < 1024) return (SET_ERROR(ENOMEM)); fnvlist_add_int32(errors, ZPROP_N_MORE_ERRORS, 0); more_errors = nvlist_prev_nvpair(errors, NULL); do { nvpair_t *pair = nvlist_prev_nvpair(errors, more_errors); fnvlist_remove_nvpair(errors, pair); n++; size = fnvlist_size(errors); } while (size > max); fnvlist_remove_nvpair(errors, more_errors); fnvlist_add_int32(errors, ZPROP_N_MORE_ERRORS, n); ASSERT3U(fnvlist_size(errors), <=, max); } return (0); } static int put_nvlist(zfs_cmd_t *zc, nvlist_t *nvl) { char *packed = NULL; int error = 0; size_t size; size = fnvlist_size(nvl); if (size > zc->zc_nvlist_dst_size) { /* * Solaris returns ENOMEM here, because even if an error is * returned from an ioctl(2), new zc_nvlist_dst_size will be * passed to the userland. This is not the case for FreeBSD. * We need to return 0, so the kernel will copy the * zc_nvlist_dst_size back and the userland can discover that a * bigger buffer is needed. */ error = 0; } else { packed = fnvlist_pack(nvl, &size); if (ddi_copyout(packed, (void *)(uintptr_t)zc->zc_nvlist_dst, size, zc->zc_iflags) != 0) error = SET_ERROR(EFAULT); fnvlist_pack_free(packed, size); } zc->zc_nvlist_dst_size = size; zc->zc_nvlist_dst_filled = B_TRUE; return (error); } int getzfsvfs_impl(objset_t *os, vfs_t **vfsp) { zfsvfs_t *zfvp; int error = 0; if (dmu_objset_type(os) != DMU_OST_ZFS) { return (SET_ERROR(EINVAL)); } mutex_enter(&os->os_user_ptr_lock); zfvp = dmu_objset_get_user(os); if (zfvp) { *vfsp = zfvp->z_vfs; vfs_ref(zfvp->z_vfs); } else { error = SET_ERROR(ESRCH); } mutex_exit(&os->os_user_ptr_lock); return (error); } int getzfsvfs(const char *dsname, zfsvfs_t **zfvp) { objset_t *os; vfs_t *vfsp; int error; error = dmu_objset_hold(dsname, FTAG, &os); if (error != 0) return (error); error = getzfsvfs_impl(os, &vfsp); dmu_objset_rele(os, FTAG); if (error != 0) return (error); error = vfs_busy(vfsp, 0); vfs_rel(vfsp); if (error != 0) { *zfvp = NULL; error = SET_ERROR(ESRCH); } else { *zfvp = vfsp->vfs_data; } return (error); } /* * Find a zfsvfs_t for a mounted filesystem, or create our own, in which * case its z_vfs will be NULL, and it will be opened as the owner. * If 'writer' is set, the z_teardown_lock will be held for RW_WRITER, * which prevents all vnode ops from running. */ static int zfsvfs_hold(const char *name, void *tag, zfsvfs_t **zfvp, boolean_t writer) { int error = 0; if (getzfsvfs(name, zfvp) != 0) error = zfsvfs_create(name, zfvp); if (error == 0) { rrm_enter(&(*zfvp)->z_teardown_lock, (writer) ? RW_WRITER : RW_READER, tag); #ifdef illumos if ((*zfvp)->z_unmounted) { /* * XXX we could probably try again, since the unmounting * thread should be just about to disassociate the * objset from the zfsvfs. */ rrm_exit(&(*zfvp)->z_teardown_lock, tag); return (SET_ERROR(EBUSY)); } #else /* * vfs_busy() ensures that the filesystem is not and * can not be unmounted. */ ASSERT(!(*zfvp)->z_unmounted); #endif } return (error); } static void zfsvfs_rele(zfsvfs_t *zfsvfs, void *tag) { rrm_exit(&zfsvfs->z_teardown_lock, tag); if (zfsvfs->z_vfs) { #ifdef illumos VFS_RELE(zfsvfs->z_vfs); #else vfs_unbusy(zfsvfs->z_vfs); #endif } else { dmu_objset_disown(zfsvfs->z_os, zfsvfs); zfsvfs_free(zfsvfs); } } static int zfs_ioc_pool_create(zfs_cmd_t *zc) { int error; nvlist_t *config, *props = NULL; nvlist_t *rootprops = NULL; nvlist_t *zplprops = NULL; char *spa_name = zc->zc_name; if (error = get_nvlist(zc->zc_nvlist_conf, zc->zc_nvlist_conf_size, zc->zc_iflags, &config)) return (error); if (zc->zc_nvlist_src_size != 0 && (error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &props))) { nvlist_free(config); return (error); } if (props) { nvlist_t *nvl = NULL; uint64_t version = SPA_VERSION; char *tname; (void) nvlist_lookup_uint64(props, zpool_prop_to_name(ZPOOL_PROP_VERSION), &version); if (!SPA_VERSION_IS_SUPPORTED(version)) { error = SET_ERROR(EINVAL); goto pool_props_bad; } (void) nvlist_lookup_nvlist(props, ZPOOL_ROOTFS_PROPS, &nvl); if (nvl) { error = nvlist_dup(nvl, &rootprops, KM_SLEEP); if (error != 0) { nvlist_free(config); nvlist_free(props); return (error); } (void) nvlist_remove_all(props, ZPOOL_ROOTFS_PROPS); } VERIFY(nvlist_alloc(&zplprops, NV_UNIQUE_NAME, KM_SLEEP) == 0); error = zfs_fill_zplprops_root(version, rootprops, zplprops, NULL); if (error != 0) goto pool_props_bad; if (nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_TNAME), &tname) == 0) spa_name = tname; } error = spa_create(zc->zc_name, config, props, zplprops); /* * Set the remaining root properties */ if (!error && (error = zfs_set_prop_nvlist(spa_name, ZPROP_SRC_LOCAL, rootprops, NULL)) != 0) (void) spa_destroy(spa_name); pool_props_bad: nvlist_free(rootprops); nvlist_free(zplprops); nvlist_free(config); nvlist_free(props); return (error); } static int zfs_ioc_pool_destroy(zfs_cmd_t *zc) { int error; zfs_log_history(zc); error = spa_destroy(zc->zc_name); if (error == 0) zvol_remove_minors(zc->zc_name); return (error); } static int zfs_ioc_pool_import(zfs_cmd_t *zc) { nvlist_t *config, *props = NULL; uint64_t guid; int error; if ((error = get_nvlist(zc->zc_nvlist_conf, zc->zc_nvlist_conf_size, zc->zc_iflags, &config)) != 0) return (error); if (zc->zc_nvlist_src_size != 0 && (error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &props))) { nvlist_free(config); return (error); } if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &guid) != 0 || guid != zc->zc_guid) error = SET_ERROR(EINVAL); else error = spa_import(zc->zc_name, config, props, zc->zc_cookie); if (zc->zc_nvlist_dst != 0) { int err; if ((err = put_nvlist(zc, config)) != 0) error = err; } nvlist_free(config); nvlist_free(props); return (error); } static int zfs_ioc_pool_export(zfs_cmd_t *zc) { int error; boolean_t force = (boolean_t)zc->zc_cookie; boolean_t hardforce = (boolean_t)zc->zc_guid; zfs_log_history(zc); error = spa_export(zc->zc_name, NULL, force, hardforce); if (error == 0) zvol_remove_minors(zc->zc_name); return (error); } static int zfs_ioc_pool_configs(zfs_cmd_t *zc) { nvlist_t *configs; int error; if ((configs = spa_all_configs(&zc->zc_cookie)) == NULL) return (SET_ERROR(EEXIST)); error = put_nvlist(zc, configs); nvlist_free(configs); return (error); } /* * inputs: * zc_name name of the pool * * outputs: * zc_cookie real errno * zc_nvlist_dst config nvlist * zc_nvlist_dst_size size of config nvlist */ static int zfs_ioc_pool_stats(zfs_cmd_t *zc) { nvlist_t *config; int error; int ret = 0; error = spa_get_stats(zc->zc_name, &config, zc->zc_value, sizeof (zc->zc_value)); if (config != NULL) { ret = put_nvlist(zc, config); nvlist_free(config); /* * The config may be present even if 'error' is non-zero. * In this case we return success, and preserve the real errno * in 'zc_cookie'. */ zc->zc_cookie = error; } else { ret = error; } return (ret); } /* * Try to import the given pool, returning pool stats as appropriate so that * user land knows which devices are available and overall pool health. */ static int zfs_ioc_pool_tryimport(zfs_cmd_t *zc) { nvlist_t *tryconfig, *config; int error; if ((error = get_nvlist(zc->zc_nvlist_conf, zc->zc_nvlist_conf_size, zc->zc_iflags, &tryconfig)) != 0) return (error); config = spa_tryimport(tryconfig); nvlist_free(tryconfig); if (config == NULL) return (SET_ERROR(EINVAL)); error = put_nvlist(zc, config); nvlist_free(config); return (error); } /* * inputs: * zc_name name of the pool * zc_cookie scan func (pool_scan_func_t) * zc_flags scrub pause/resume flag (pool_scrub_cmd_t) */ static int zfs_ioc_pool_scan(zfs_cmd_t *zc) { spa_t *spa; int error; if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) return (error); if (zc->zc_flags >= POOL_SCRUB_FLAGS_END) return (SET_ERROR(EINVAL)); if (zc->zc_flags == POOL_SCRUB_PAUSE) error = spa_scrub_pause_resume(spa, POOL_SCRUB_PAUSE); else if (zc->zc_cookie == POOL_SCAN_NONE) error = spa_scan_stop(spa); else error = spa_scan(spa, zc->zc_cookie); spa_close(spa, FTAG); return (error); } static int zfs_ioc_pool_freeze(zfs_cmd_t *zc) { spa_t *spa; int error; error = spa_open(zc->zc_name, &spa, FTAG); if (error == 0) { spa_freeze(spa); spa_close(spa, FTAG); } return (error); } static int zfs_ioc_pool_upgrade(zfs_cmd_t *zc) { spa_t *spa; int error; if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) return (error); if (zc->zc_cookie < spa_version(spa) || !SPA_VERSION_IS_SUPPORTED(zc->zc_cookie)) { spa_close(spa, FTAG); return (SET_ERROR(EINVAL)); } spa_upgrade(spa, zc->zc_cookie); spa_close(spa, FTAG); return (error); } static int zfs_ioc_pool_get_history(zfs_cmd_t *zc) { spa_t *spa; char *hist_buf; uint64_t size; int error; if ((size = zc->zc_history_len) == 0) return (SET_ERROR(EINVAL)); if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) return (error); if (spa_version(spa) < SPA_VERSION_ZPOOL_HISTORY) { spa_close(spa, FTAG); return (SET_ERROR(ENOTSUP)); } hist_buf = kmem_alloc(size, KM_SLEEP); if ((error = spa_history_get(spa, &zc->zc_history_offset, &zc->zc_history_len, hist_buf)) == 0) { error = ddi_copyout(hist_buf, (void *)(uintptr_t)zc->zc_history, zc->zc_history_len, zc->zc_iflags); } spa_close(spa, FTAG); kmem_free(hist_buf, size); return (error); } static int zfs_ioc_pool_reguid(zfs_cmd_t *zc) { spa_t *spa; int error; error = spa_open(zc->zc_name, &spa, FTAG); if (error == 0) { error = spa_change_guid(spa); spa_close(spa, FTAG); } return (error); } static int zfs_ioc_dsobj_to_dsname(zfs_cmd_t *zc) { return (dsl_dsobj_to_dsname(zc->zc_name, zc->zc_obj, zc->zc_value)); } /* * inputs: * zc_name name of filesystem * zc_obj object to find * * outputs: * zc_value name of object */ static int zfs_ioc_obj_to_path(zfs_cmd_t *zc) { objset_t *os; int error; /* XXX reading from objset not owned */ if ((error = dmu_objset_hold(zc->zc_name, FTAG, &os)) != 0) return (error); if (dmu_objset_type(os) != DMU_OST_ZFS) { dmu_objset_rele(os, FTAG); return (SET_ERROR(EINVAL)); } error = zfs_obj_to_path(os, zc->zc_obj, zc->zc_value, sizeof (zc->zc_value)); dmu_objset_rele(os, FTAG); return (error); } /* * inputs: * zc_name name of filesystem * zc_obj object to find * * outputs: * zc_stat stats on object * zc_value path to object */ static int zfs_ioc_obj_to_stats(zfs_cmd_t *zc) { objset_t *os; int error; /* XXX reading from objset not owned */ if ((error = dmu_objset_hold(zc->zc_name, FTAG, &os)) != 0) return (error); if (dmu_objset_type(os) != DMU_OST_ZFS) { dmu_objset_rele(os, FTAG); return (SET_ERROR(EINVAL)); } error = zfs_obj_to_stats(os, zc->zc_obj, &zc->zc_stat, zc->zc_value, sizeof (zc->zc_value)); dmu_objset_rele(os, FTAG); return (error); } static int zfs_ioc_vdev_add(zfs_cmd_t *zc) { spa_t *spa; int error; nvlist_t *config, **l2cache, **spares; uint_t nl2cache = 0, nspares = 0; error = spa_open(zc->zc_name, &spa, FTAG); if (error != 0) return (error); error = get_nvlist(zc->zc_nvlist_conf, zc->zc_nvlist_conf_size, zc->zc_iflags, &config); (void) nvlist_lookup_nvlist_array(config, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache); (void) nvlist_lookup_nvlist_array(config, ZPOOL_CONFIG_SPARES, &spares, &nspares); #ifdef illumos /* * A root pool with concatenated devices is not supported. * Thus, can not add a device to a root pool. * * Intent log device can not be added to a rootpool because * during mountroot, zil is replayed, a seperated log device * can not be accessed during the mountroot time. * * l2cache and spare devices are ok to be added to a rootpool. */ if (spa_bootfs(spa) != 0 && nl2cache == 0 && nspares == 0) { nvlist_free(config); spa_close(spa, FTAG); return (SET_ERROR(EDOM)); } #endif /* illumos */ if (error == 0) { error = spa_vdev_add(spa, config); nvlist_free(config); } spa_close(spa, FTAG); return (error); } /* * inputs: * zc_name name of the pool * zc_guid guid of vdev to remove * zc_cookie cancel removal */ static int zfs_ioc_vdev_remove(zfs_cmd_t *zc) { spa_t *spa; int error; error = spa_open(zc->zc_name, &spa, FTAG); if (error != 0) return (error); if (zc->zc_cookie != 0) { error = spa_vdev_remove_cancel(spa); } else { error = spa_vdev_remove(spa, zc->zc_guid, B_FALSE); } spa_close(spa, FTAG); return (error); } static int zfs_ioc_vdev_set_state(zfs_cmd_t *zc) { spa_t *spa; int error; vdev_state_t newstate = VDEV_STATE_UNKNOWN; if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) return (error); switch (zc->zc_cookie) { case VDEV_STATE_ONLINE: error = vdev_online(spa, zc->zc_guid, zc->zc_obj, &newstate); break; case VDEV_STATE_OFFLINE: error = vdev_offline(spa, zc->zc_guid, zc->zc_obj); break; case VDEV_STATE_FAULTED: if (zc->zc_obj != VDEV_AUX_ERR_EXCEEDED && zc->zc_obj != VDEV_AUX_EXTERNAL) zc->zc_obj = VDEV_AUX_ERR_EXCEEDED; error = vdev_fault(spa, zc->zc_guid, zc->zc_obj); break; case VDEV_STATE_DEGRADED: if (zc->zc_obj != VDEV_AUX_ERR_EXCEEDED && zc->zc_obj != VDEV_AUX_EXTERNAL) zc->zc_obj = VDEV_AUX_ERR_EXCEEDED; error = vdev_degrade(spa, zc->zc_guid, zc->zc_obj); break; default: error = SET_ERROR(EINVAL); } zc->zc_cookie = newstate; spa_close(spa, FTAG); return (error); } static int zfs_ioc_vdev_attach(zfs_cmd_t *zc) { spa_t *spa; int replacing = zc->zc_cookie; nvlist_t *config; int error; if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) return (error); if ((error = get_nvlist(zc->zc_nvlist_conf, zc->zc_nvlist_conf_size, zc->zc_iflags, &config)) == 0) { error = spa_vdev_attach(spa, zc->zc_guid, config, replacing); nvlist_free(config); } spa_close(spa, FTAG); return (error); } static int zfs_ioc_vdev_detach(zfs_cmd_t *zc) { spa_t *spa; int error; if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) return (error); error = spa_vdev_detach(spa, zc->zc_guid, 0, B_FALSE); spa_close(spa, FTAG); return (error); } static int zfs_ioc_vdev_split(zfs_cmd_t *zc) { spa_t *spa; nvlist_t *config, *props = NULL; int error; boolean_t exp = !!(zc->zc_cookie & ZPOOL_EXPORT_AFTER_SPLIT); if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) return (error); if (error = get_nvlist(zc->zc_nvlist_conf, zc->zc_nvlist_conf_size, zc->zc_iflags, &config)) { spa_close(spa, FTAG); return (error); } if (zc->zc_nvlist_src_size != 0 && (error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &props))) { spa_close(spa, FTAG); nvlist_free(config); return (error); } error = spa_vdev_split_mirror(spa, zc->zc_string, config, props, exp); spa_close(spa, FTAG); nvlist_free(config); nvlist_free(props); return (error); } static int zfs_ioc_vdev_setpath(zfs_cmd_t *zc) { spa_t *spa; char *path = zc->zc_value; uint64_t guid = zc->zc_guid; int error; error = spa_open(zc->zc_name, &spa, FTAG); if (error != 0) return (error); error = spa_vdev_setpath(spa, guid, path); spa_close(spa, FTAG); return (error); } static int zfs_ioc_vdev_setfru(zfs_cmd_t *zc) { spa_t *spa; char *fru = zc->zc_value; uint64_t guid = zc->zc_guid; int error; error = spa_open(zc->zc_name, &spa, FTAG); if (error != 0) return (error); error = spa_vdev_setfru(spa, guid, fru); spa_close(spa, FTAG); return (error); } static int zfs_ioc_objset_stats_impl(zfs_cmd_t *zc, objset_t *os) { int error = 0; nvlist_t *nv; dmu_objset_fast_stat(os, &zc->zc_objset_stats); if (zc->zc_nvlist_dst != 0 && (error = dsl_prop_get_all(os, &nv)) == 0) { dmu_objset_stats(os, nv); /* * NB: zvol_get_stats() will read the objset contents, * which we aren't supposed to do with a * DS_MODE_USER hold, because it could be * inconsistent. So this is a bit of a workaround... * XXX reading with out owning */ if (!zc->zc_objset_stats.dds_inconsistent && dmu_objset_type(os) == DMU_OST_ZVOL) { error = zvol_get_stats(os, nv); if (error == EIO) return (error); VERIFY0(error); } error = put_nvlist(zc, nv); nvlist_free(nv); } return (error); } /* * inputs: * zc_name name of filesystem * zc_nvlist_dst_size size of buffer for property nvlist * * outputs: * zc_objset_stats stats * zc_nvlist_dst property nvlist * zc_nvlist_dst_size size of property nvlist */ static int zfs_ioc_objset_stats(zfs_cmd_t *zc) { objset_t *os; int error; error = dmu_objset_hold(zc->zc_name, FTAG, &os); if (error == 0) { error = zfs_ioc_objset_stats_impl(zc, os); dmu_objset_rele(os, FTAG); } if (error == ENOMEM) error = 0; return (error); } /* * inputs: * zc_name name of filesystem * zc_nvlist_dst_size size of buffer for property nvlist * * outputs: * zc_nvlist_dst received property nvlist * zc_nvlist_dst_size size of received property nvlist * * Gets received properties (distinct from local properties on or after * SPA_VERSION_RECVD_PROPS) for callers who want to differentiate received from * local property values. */ static int zfs_ioc_objset_recvd_props(zfs_cmd_t *zc) { int error = 0; nvlist_t *nv; /* * Without this check, we would return local property values if the * caller has not already received properties on or after * SPA_VERSION_RECVD_PROPS. */ if (!dsl_prop_get_hasrecvd(zc->zc_name)) return (SET_ERROR(ENOTSUP)); if (zc->zc_nvlist_dst != 0 && (error = dsl_prop_get_received(zc->zc_name, &nv)) == 0) { error = put_nvlist(zc, nv); nvlist_free(nv); } return (error); } static int nvl_add_zplprop(objset_t *os, nvlist_t *props, zfs_prop_t prop) { uint64_t value; int error; /* * zfs_get_zplprop() will either find a value or give us * the default value (if there is one). */ if ((error = zfs_get_zplprop(os, prop, &value)) != 0) return (error); VERIFY(nvlist_add_uint64(props, zfs_prop_to_name(prop), value) == 0); return (0); } /* * inputs: * zc_name name of filesystem * zc_nvlist_dst_size size of buffer for zpl property nvlist * * outputs: * zc_nvlist_dst zpl property nvlist * zc_nvlist_dst_size size of zpl property nvlist */ static int zfs_ioc_objset_zplprops(zfs_cmd_t *zc) { objset_t *os; int err; /* XXX reading without owning */ if (err = dmu_objset_hold(zc->zc_name, FTAG, &os)) return (err); dmu_objset_fast_stat(os, &zc->zc_objset_stats); /* * NB: nvl_add_zplprop() will read the objset contents, * which we aren't supposed to do with a DS_MODE_USER * hold, because it could be inconsistent. */ if (zc->zc_nvlist_dst != 0 && !zc->zc_objset_stats.dds_inconsistent && dmu_objset_type(os) == DMU_OST_ZFS) { nvlist_t *nv; VERIFY(nvlist_alloc(&nv, NV_UNIQUE_NAME, KM_SLEEP) == 0); if ((err = nvl_add_zplprop(os, nv, ZFS_PROP_VERSION)) == 0 && (err = nvl_add_zplprop(os, nv, ZFS_PROP_NORMALIZE)) == 0 && (err = nvl_add_zplprop(os, nv, ZFS_PROP_UTF8ONLY)) == 0 && (err = nvl_add_zplprop(os, nv, ZFS_PROP_CASE)) == 0) err = put_nvlist(zc, nv); nvlist_free(nv); } else { err = SET_ERROR(ENOENT); } dmu_objset_rele(os, FTAG); return (err); } boolean_t dataset_name_hidden(const char *name) { /* * Skip over datasets that are not visible in this zone, * internal datasets (which have a $ in their name), and * temporary datasets (which have a % in their name). */ if (strchr(name, '$') != NULL) return (B_TRUE); if (strchr(name, '%') != NULL) return (B_TRUE); if (!INGLOBALZONE(curthread) && !zone_dataset_visible(name, NULL)) return (B_TRUE); return (B_FALSE); } /* * inputs: * zc_name name of filesystem * zc_cookie zap cursor * zc_nvlist_dst_size size of buffer for property nvlist * * outputs: * zc_name name of next filesystem * zc_cookie zap cursor * zc_objset_stats stats * zc_nvlist_dst property nvlist * zc_nvlist_dst_size size of property nvlist */ static int zfs_ioc_dataset_list_next(zfs_cmd_t *zc) { objset_t *os; int error; char *p; size_t orig_len = strlen(zc->zc_name); top: if (error = dmu_objset_hold(zc->zc_name, FTAG, &os)) { if (error == ENOENT) error = SET_ERROR(ESRCH); return (error); } p = strrchr(zc->zc_name, '/'); if (p == NULL || p[1] != '\0') (void) strlcat(zc->zc_name, "/", sizeof (zc->zc_name)); p = zc->zc_name + strlen(zc->zc_name); do { error = dmu_dir_list_next(os, sizeof (zc->zc_name) - (p - zc->zc_name), p, NULL, &zc->zc_cookie); if (error == ENOENT) error = SET_ERROR(ESRCH); } while (error == 0 && dataset_name_hidden(zc->zc_name)); dmu_objset_rele(os, FTAG); /* * If it's an internal dataset (ie. with a '$' in its name), * don't try to get stats for it, otherwise we'll return ENOENT. */ if (error == 0 && strchr(zc->zc_name, '$') == NULL) { error = zfs_ioc_objset_stats(zc); /* fill in the stats */ if (error == ENOENT) { /* We lost a race with destroy, get the next one. */ zc->zc_name[orig_len] = '\0'; goto top; } } return (error); } /* * inputs: * zc_name name of filesystem * zc_cookie zap cursor * zc_nvlist_dst_size size of buffer for property nvlist * zc_simple when set, only name is requested * * outputs: * zc_name name of next snapshot * zc_objset_stats stats * zc_nvlist_dst property nvlist * zc_nvlist_dst_size size of property nvlist */ static int zfs_ioc_snapshot_list_next(zfs_cmd_t *zc) { objset_t *os; int error; error = dmu_objset_hold(zc->zc_name, FTAG, &os); if (error != 0) { return (error == ENOENT ? ESRCH : error); } /* * A dataset name of maximum length cannot have any snapshots, * so exit immediately. */ if (strlcat(zc->zc_name, "@", sizeof (zc->zc_name)) >= ZFS_MAX_DATASET_NAME_LEN) { dmu_objset_rele(os, FTAG); return (SET_ERROR(ESRCH)); } error = dmu_snapshot_list_next(os, sizeof (zc->zc_name) - strlen(zc->zc_name), zc->zc_name + strlen(zc->zc_name), &zc->zc_obj, &zc->zc_cookie, NULL); if (error == 0 && !zc->zc_simple) { dsl_dataset_t *ds; dsl_pool_t *dp = os->os_dsl_dataset->ds_dir->dd_pool; error = dsl_dataset_hold_obj(dp, zc->zc_obj, FTAG, &ds); if (error == 0) { objset_t *ossnap; error = dmu_objset_from_ds(ds, &ossnap); if (error == 0) error = zfs_ioc_objset_stats_impl(zc, ossnap); dsl_dataset_rele(ds, FTAG); } } else if (error == ENOENT) { error = SET_ERROR(ESRCH); } dmu_objset_rele(os, FTAG); /* if we failed, undo the @ that we tacked on to zc_name */ if (error != 0) *strchr(zc->zc_name, '@') = '\0'; return (error); } static int zfs_prop_set_userquota(const char *dsname, nvpair_t *pair) { const char *propname = nvpair_name(pair); uint64_t *valary; unsigned int vallen; const char *domain; char *dash; zfs_userquota_prop_t type; uint64_t rid; uint64_t quota; zfsvfs_t *zfsvfs; int err; if (nvpair_type(pair) == DATA_TYPE_NVLIST) { nvlist_t *attrs; VERIFY(nvpair_value_nvlist(pair, &attrs) == 0); if (nvlist_lookup_nvpair(attrs, ZPROP_VALUE, &pair) != 0) return (SET_ERROR(EINVAL)); } /* * A correctly constructed propname is encoded as * userquota@-. */ if ((dash = strchr(propname, '-')) == NULL || nvpair_value_uint64_array(pair, &valary, &vallen) != 0 || vallen != 3) return (SET_ERROR(EINVAL)); domain = dash + 1; type = valary[0]; rid = valary[1]; quota = valary[2]; err = zfsvfs_hold(dsname, FTAG, &zfsvfs, B_FALSE); if (err == 0) { err = zfs_set_userquota(zfsvfs, type, domain, rid, quota); zfsvfs_rele(zfsvfs, FTAG); } return (err); } /* * If the named property is one that has a special function to set its value, * return 0 on success and a positive error code on failure; otherwise if it is * not one of the special properties handled by this function, return -1. * * XXX: It would be better for callers of the property interface if we handled * these special cases in dsl_prop.c (in the dsl layer). */ static int zfs_prop_set_special(const char *dsname, zprop_source_t source, nvpair_t *pair) { const char *propname = nvpair_name(pair); zfs_prop_t prop = zfs_name_to_prop(propname); uint64_t intval; int err = -1; if (prop == ZPROP_INVAL) { if (zfs_prop_userquota(propname)) return (zfs_prop_set_userquota(dsname, pair)); return (-1); } if (nvpair_type(pair) == DATA_TYPE_NVLIST) { nvlist_t *attrs; VERIFY(nvpair_value_nvlist(pair, &attrs) == 0); VERIFY(nvlist_lookup_nvpair(attrs, ZPROP_VALUE, &pair) == 0); } if (zfs_prop_get_type(prop) == PROP_TYPE_STRING) return (-1); VERIFY(0 == nvpair_value_uint64(pair, &intval)); switch (prop) { case ZFS_PROP_QUOTA: err = dsl_dir_set_quota(dsname, source, intval); break; case ZFS_PROP_REFQUOTA: err = dsl_dataset_set_refquota(dsname, source, intval); break; case ZFS_PROP_FILESYSTEM_LIMIT: case ZFS_PROP_SNAPSHOT_LIMIT: if (intval == UINT64_MAX) { /* clearing the limit, just do it */ err = 0; } else { err = dsl_dir_activate_fs_ss_limit(dsname); } /* * Set err to -1 to force the zfs_set_prop_nvlist code down the * default path to set the value in the nvlist. */ if (err == 0) err = -1; break; case ZFS_PROP_RESERVATION: err = dsl_dir_set_reservation(dsname, source, intval); break; case ZFS_PROP_REFRESERVATION: err = dsl_dataset_set_refreservation(dsname, source, intval); break; case ZFS_PROP_VOLSIZE: err = zvol_set_volsize(dsname, intval); break; case ZFS_PROP_VERSION: { zfsvfs_t *zfsvfs; if ((err = zfsvfs_hold(dsname, FTAG, &zfsvfs, B_TRUE)) != 0) break; err = zfs_set_version(zfsvfs, intval); zfsvfs_rele(zfsvfs, FTAG); if (err == 0 && intval >= ZPL_VERSION_USERSPACE) { zfs_cmd_t *zc; zc = kmem_zalloc(sizeof (zfs_cmd_t), KM_SLEEP); (void) strcpy(zc->zc_name, dsname); (void) zfs_ioc_userspace_upgrade(zc); kmem_free(zc, sizeof (zfs_cmd_t)); } break; } default: err = -1; } return (err); } /* * This function is best effort. If it fails to set any of the given properties, * it continues to set as many as it can and returns the last error * encountered. If the caller provides a non-NULL errlist, it will be filled in * with the list of names of all the properties that failed along with the * corresponding error numbers. * * If every property is set successfully, zero is returned and errlist is not * modified. */ int zfs_set_prop_nvlist(const char *dsname, zprop_source_t source, nvlist_t *nvl, nvlist_t *errlist) { nvpair_t *pair; nvpair_t *propval; int rv = 0; uint64_t intval; char *strval; nvlist_t *genericnvl = fnvlist_alloc(); nvlist_t *retrynvl = fnvlist_alloc(); retry: pair = NULL; while ((pair = nvlist_next_nvpair(nvl, pair)) != NULL) { const char *propname = nvpair_name(pair); zfs_prop_t prop = zfs_name_to_prop(propname); int err = 0; /* decode the property value */ propval = pair; if (nvpair_type(pair) == DATA_TYPE_NVLIST) { nvlist_t *attrs; attrs = fnvpair_value_nvlist(pair); if (nvlist_lookup_nvpair(attrs, ZPROP_VALUE, &propval) != 0) err = SET_ERROR(EINVAL); } /* Validate value type */ if (err == 0 && prop == ZPROP_INVAL) { if (zfs_prop_user(propname)) { if (nvpair_type(propval) != DATA_TYPE_STRING) err = SET_ERROR(EINVAL); } else if (zfs_prop_userquota(propname)) { if (nvpair_type(propval) != DATA_TYPE_UINT64_ARRAY) err = SET_ERROR(EINVAL); } else { err = SET_ERROR(EINVAL); } } else if (err == 0) { if (nvpair_type(propval) == DATA_TYPE_STRING) { if (zfs_prop_get_type(prop) != PROP_TYPE_STRING) err = SET_ERROR(EINVAL); } else if (nvpair_type(propval) == DATA_TYPE_UINT64) { const char *unused; intval = fnvpair_value_uint64(propval); switch (zfs_prop_get_type(prop)) { case PROP_TYPE_NUMBER: break; case PROP_TYPE_STRING: err = SET_ERROR(EINVAL); break; case PROP_TYPE_INDEX: if (zfs_prop_index_to_string(prop, intval, &unused) != 0) err = SET_ERROR(EINVAL); break; default: cmn_err(CE_PANIC, "unknown property type"); } } else { err = SET_ERROR(EINVAL); } } /* Validate permissions */ if (err == 0) err = zfs_check_settable(dsname, pair, CRED()); if (err == 0) { err = zfs_prop_set_special(dsname, source, pair); if (err == -1) { /* * For better performance we build up a list of * properties to set in a single transaction. */ err = nvlist_add_nvpair(genericnvl, pair); } else if (err != 0 && nvl != retrynvl) { /* * This may be a spurious error caused by * receiving quota and reservation out of order. * Try again in a second pass. */ err = nvlist_add_nvpair(retrynvl, pair); } } if (err != 0) { if (errlist != NULL) fnvlist_add_int32(errlist, propname, err); rv = err; } } if (nvl != retrynvl && !nvlist_empty(retrynvl)) { nvl = retrynvl; goto retry; } if (!nvlist_empty(genericnvl) && dsl_props_set(dsname, source, genericnvl) != 0) { /* * If this fails, we still want to set as many properties as we * can, so try setting them individually. */ pair = NULL; while ((pair = nvlist_next_nvpair(genericnvl, pair)) != NULL) { const char *propname = nvpair_name(pair); int err = 0; propval = pair; if (nvpair_type(pair) == DATA_TYPE_NVLIST) { nvlist_t *attrs; attrs = fnvpair_value_nvlist(pair); propval = fnvlist_lookup_nvpair(attrs, ZPROP_VALUE); } if (nvpair_type(propval) == DATA_TYPE_STRING) { strval = fnvpair_value_string(propval); err = dsl_prop_set_string(dsname, propname, source, strval); } else { intval = fnvpair_value_uint64(propval); err = dsl_prop_set_int(dsname, propname, source, intval); } if (err != 0) { if (errlist != NULL) { fnvlist_add_int32(errlist, propname, err); } rv = err; } } } nvlist_free(genericnvl); nvlist_free(retrynvl); return (rv); } /* * Check that all the properties are valid user properties. */ static int zfs_check_userprops(const char *fsname, nvlist_t *nvl) { nvpair_t *pair = NULL; int error = 0; while ((pair = nvlist_next_nvpair(nvl, pair)) != NULL) { const char *propname = nvpair_name(pair); if (!zfs_prop_user(propname) || nvpair_type(pair) != DATA_TYPE_STRING) return (SET_ERROR(EINVAL)); if (error = zfs_secpolicy_write_perms(fsname, ZFS_DELEG_PERM_USERPROP, CRED())) return (error); if (strlen(propname) >= ZAP_MAXNAMELEN) return (SET_ERROR(ENAMETOOLONG)); if (strlen(fnvpair_value_string(pair)) >= ZAP_MAXVALUELEN) return (E2BIG); } return (0); } static void props_skip(nvlist_t *props, nvlist_t *skipped, nvlist_t **newprops) { nvpair_t *pair; VERIFY(nvlist_alloc(newprops, NV_UNIQUE_NAME, KM_SLEEP) == 0); pair = NULL; while ((pair = nvlist_next_nvpair(props, pair)) != NULL) { if (nvlist_exists(skipped, nvpair_name(pair))) continue; VERIFY(nvlist_add_nvpair(*newprops, pair) == 0); } } static int clear_received_props(const char *dsname, nvlist_t *props, nvlist_t *skipped) { int err = 0; nvlist_t *cleared_props = NULL; props_skip(props, skipped, &cleared_props); if (!nvlist_empty(cleared_props)) { /* * Acts on local properties until the dataset has received * properties at least once on or after SPA_VERSION_RECVD_PROPS. */ zprop_source_t flags = (ZPROP_SRC_NONE | (dsl_prop_get_hasrecvd(dsname) ? ZPROP_SRC_RECEIVED : 0)); err = zfs_set_prop_nvlist(dsname, flags, cleared_props, NULL); } nvlist_free(cleared_props); return (err); } /* * inputs: * zc_name name of filesystem * zc_value name of property to set * zc_nvlist_src{_size} nvlist of properties to apply * zc_cookie received properties flag * * outputs: * zc_nvlist_dst{_size} error for each unapplied received property */ static int zfs_ioc_set_prop(zfs_cmd_t *zc) { nvlist_t *nvl; boolean_t received = zc->zc_cookie; zprop_source_t source = (received ? ZPROP_SRC_RECEIVED : ZPROP_SRC_LOCAL); nvlist_t *errors; int error; if ((error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &nvl)) != 0) return (error); if (received) { nvlist_t *origprops; if (dsl_prop_get_received(zc->zc_name, &origprops) == 0) { (void) clear_received_props(zc->zc_name, origprops, nvl); nvlist_free(origprops); } error = dsl_prop_set_hasrecvd(zc->zc_name); } errors = fnvlist_alloc(); if (error == 0) error = zfs_set_prop_nvlist(zc->zc_name, source, nvl, errors); if (zc->zc_nvlist_dst != 0 && errors != NULL) { (void) put_nvlist(zc, errors); } nvlist_free(errors); nvlist_free(nvl); return (error); } /* * inputs: * zc_name name of filesystem * zc_value name of property to inherit * zc_cookie revert to received value if TRUE * * outputs: none */ static int zfs_ioc_inherit_prop(zfs_cmd_t *zc) { const char *propname = zc->zc_value; zfs_prop_t prop = zfs_name_to_prop(propname); boolean_t received = zc->zc_cookie; zprop_source_t source = (received ? ZPROP_SRC_NONE /* revert to received value, if any */ : ZPROP_SRC_INHERITED); /* explicitly inherit */ if (received) { nvlist_t *dummy; nvpair_t *pair; zprop_type_t type; int err; /* * zfs_prop_set_special() expects properties in the form of an * nvpair with type info. */ if (prop == ZPROP_INVAL) { if (!zfs_prop_user(propname)) return (SET_ERROR(EINVAL)); type = PROP_TYPE_STRING; } else if (prop == ZFS_PROP_VOLSIZE || prop == ZFS_PROP_VERSION) { return (SET_ERROR(EINVAL)); } else { type = zfs_prop_get_type(prop); } VERIFY(nvlist_alloc(&dummy, NV_UNIQUE_NAME, KM_SLEEP) == 0); switch (type) { case PROP_TYPE_STRING: VERIFY(0 == nvlist_add_string(dummy, propname, "")); break; case PROP_TYPE_NUMBER: case PROP_TYPE_INDEX: VERIFY(0 == nvlist_add_uint64(dummy, propname, 0)); break; default: nvlist_free(dummy); return (SET_ERROR(EINVAL)); } pair = nvlist_next_nvpair(dummy, NULL); err = zfs_prop_set_special(zc->zc_name, source, pair); nvlist_free(dummy); if (err != -1) return (err); /* special property already handled */ } else { /* * Only check this in the non-received case. We want to allow * 'inherit -S' to revert non-inheritable properties like quota * and reservation to the received or default values even though * they are not considered inheritable. */ if (prop != ZPROP_INVAL && !zfs_prop_inheritable(prop)) return (SET_ERROR(EINVAL)); } /* property name has been validated by zfs_secpolicy_inherit_prop() */ return (dsl_prop_inherit(zc->zc_name, zc->zc_value, source)); } static int zfs_ioc_pool_set_props(zfs_cmd_t *zc) { nvlist_t *props; spa_t *spa; int error; nvpair_t *pair; if (error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &props)) return (error); /* * If the only property is the configfile, then just do a spa_lookup() * to handle the faulted case. */ pair = nvlist_next_nvpair(props, NULL); if (pair != NULL && strcmp(nvpair_name(pair), zpool_prop_to_name(ZPOOL_PROP_CACHEFILE)) == 0 && nvlist_next_nvpair(props, pair) == NULL) { mutex_enter(&spa_namespace_lock); if ((spa = spa_lookup(zc->zc_name)) != NULL) { spa_configfile_set(spa, props, B_FALSE); spa_write_cachefile(spa, B_FALSE, B_TRUE); } mutex_exit(&spa_namespace_lock); if (spa != NULL) { nvlist_free(props); return (0); } } if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) { nvlist_free(props); return (error); } error = spa_prop_set(spa, props); nvlist_free(props); spa_close(spa, FTAG); return (error); } static int zfs_ioc_pool_get_props(zfs_cmd_t *zc) { spa_t *spa; int error; nvlist_t *nvp = NULL; if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) { /* * If the pool is faulted, there may be properties we can still * get (such as altroot and cachefile), so attempt to get them * anyway. */ mutex_enter(&spa_namespace_lock); if ((spa = spa_lookup(zc->zc_name)) != NULL) error = spa_prop_get(spa, &nvp); mutex_exit(&spa_namespace_lock); } else { error = spa_prop_get(spa, &nvp); spa_close(spa, FTAG); } if (error == 0 && zc->zc_nvlist_dst != 0) error = put_nvlist(zc, nvp); else error = SET_ERROR(EFAULT); nvlist_free(nvp); return (error); } /* * inputs: * zc_name name of filesystem * zc_nvlist_src{_size} nvlist of delegated permissions * zc_perm_action allow/unallow flag * * outputs: none */ static int zfs_ioc_set_fsacl(zfs_cmd_t *zc) { int error; nvlist_t *fsaclnv = NULL; if ((error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &fsaclnv)) != 0) return (error); /* * Verify nvlist is constructed correctly */ if ((error = zfs_deleg_verify_nvlist(fsaclnv)) != 0) { nvlist_free(fsaclnv); return (SET_ERROR(EINVAL)); } /* * If we don't have PRIV_SYS_MOUNT, then validate * that user is allowed to hand out each permission in * the nvlist(s) */ error = secpolicy_zfs(CRED()); if (error != 0) { if (zc->zc_perm_action == B_FALSE) { error = dsl_deleg_can_allow(zc->zc_name, fsaclnv, CRED()); } else { error = dsl_deleg_can_unallow(zc->zc_name, fsaclnv, CRED()); } } if (error == 0) error = dsl_deleg_set(zc->zc_name, fsaclnv, zc->zc_perm_action); nvlist_free(fsaclnv); return (error); } /* * inputs: * zc_name name of filesystem * * outputs: * zc_nvlist_src{_size} nvlist of delegated permissions */ static int zfs_ioc_get_fsacl(zfs_cmd_t *zc) { nvlist_t *nvp; int error; if ((error = dsl_deleg_get(zc->zc_name, &nvp)) == 0) { error = put_nvlist(zc, nvp); nvlist_free(nvp); } return (error); } /* ARGSUSED */ static void zfs_create_cb(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx) { zfs_creat_t *zct = arg; zfs_create_fs(os, cr, zct->zct_zplprops, tx); } #define ZFS_PROP_UNDEFINED ((uint64_t)-1) /* * inputs: * os parent objset pointer (NULL if root fs) * fuids_ok fuids allowed in this version of the spa? * sa_ok SAs allowed in this version of the spa? * createprops list of properties requested by creator * * outputs: * zplprops values for the zplprops we attach to the master node object * is_ci true if requested file system will be purely case-insensitive * * Determine the settings for utf8only, normalization and * casesensitivity. Specific values may have been requested by the * creator and/or we can inherit values from the parent dataset. If * the file system is of too early a vintage, a creator can not * request settings for these properties, even if the requested * setting is the default value. We don't actually want to create dsl * properties for these, so remove them from the source nvlist after * processing. */ static int zfs_fill_zplprops_impl(objset_t *os, uint64_t zplver, boolean_t fuids_ok, boolean_t sa_ok, nvlist_t *createprops, nvlist_t *zplprops, boolean_t *is_ci) { uint64_t sense = ZFS_PROP_UNDEFINED; uint64_t norm = ZFS_PROP_UNDEFINED; uint64_t u8 = ZFS_PROP_UNDEFINED; ASSERT(zplprops != NULL); if (os != NULL && os->os_phys->os_type != DMU_OST_ZFS) return (SET_ERROR(EINVAL)); /* * Pull out creator prop choices, if any. */ if (createprops) { (void) nvlist_lookup_uint64(createprops, zfs_prop_to_name(ZFS_PROP_VERSION), &zplver); (void) nvlist_lookup_uint64(createprops, zfs_prop_to_name(ZFS_PROP_NORMALIZE), &norm); (void) nvlist_remove_all(createprops, zfs_prop_to_name(ZFS_PROP_NORMALIZE)); (void) nvlist_lookup_uint64(createprops, zfs_prop_to_name(ZFS_PROP_UTF8ONLY), &u8); (void) nvlist_remove_all(createprops, zfs_prop_to_name(ZFS_PROP_UTF8ONLY)); (void) nvlist_lookup_uint64(createprops, zfs_prop_to_name(ZFS_PROP_CASE), &sense); (void) nvlist_remove_all(createprops, zfs_prop_to_name(ZFS_PROP_CASE)); } /* * If the zpl version requested is whacky or the file system * or pool is version is too "young" to support normalization * and the creator tried to set a value for one of the props, * error out. */ if ((zplver < ZPL_VERSION_INITIAL || zplver > ZPL_VERSION) || (zplver >= ZPL_VERSION_FUID && !fuids_ok) || (zplver >= ZPL_VERSION_SA && !sa_ok) || (zplver < ZPL_VERSION_NORMALIZATION && (norm != ZFS_PROP_UNDEFINED || u8 != ZFS_PROP_UNDEFINED || sense != ZFS_PROP_UNDEFINED))) return (SET_ERROR(ENOTSUP)); /* * Put the version in the zplprops */ VERIFY(nvlist_add_uint64(zplprops, zfs_prop_to_name(ZFS_PROP_VERSION), zplver) == 0); if (norm == ZFS_PROP_UNDEFINED) VERIFY(zfs_get_zplprop(os, ZFS_PROP_NORMALIZE, &norm) == 0); VERIFY(nvlist_add_uint64(zplprops, zfs_prop_to_name(ZFS_PROP_NORMALIZE), norm) == 0); /* * If we're normalizing, names must always be valid UTF-8 strings. */ if (norm) u8 = 1; if (u8 == ZFS_PROP_UNDEFINED) VERIFY(zfs_get_zplprop(os, ZFS_PROP_UTF8ONLY, &u8) == 0); VERIFY(nvlist_add_uint64(zplprops, zfs_prop_to_name(ZFS_PROP_UTF8ONLY), u8) == 0); if (sense == ZFS_PROP_UNDEFINED) VERIFY(zfs_get_zplprop(os, ZFS_PROP_CASE, &sense) == 0); VERIFY(nvlist_add_uint64(zplprops, zfs_prop_to_name(ZFS_PROP_CASE), sense) == 0); if (is_ci) *is_ci = (sense == ZFS_CASE_INSENSITIVE); return (0); } static int zfs_fill_zplprops(const char *dataset, nvlist_t *createprops, nvlist_t *zplprops, boolean_t *is_ci) { boolean_t fuids_ok, sa_ok; uint64_t zplver = ZPL_VERSION; objset_t *os = NULL; char parentname[ZFS_MAX_DATASET_NAME_LEN]; char *cp; spa_t *spa; uint64_t spa_vers; int error; (void) strlcpy(parentname, dataset, sizeof (parentname)); cp = strrchr(parentname, '/'); ASSERT(cp != NULL); cp[0] = '\0'; if ((error = spa_open(dataset, &spa, FTAG)) != 0) return (error); spa_vers = spa_version(spa); spa_close(spa, FTAG); zplver = zfs_zpl_version_map(spa_vers); fuids_ok = (zplver >= ZPL_VERSION_FUID); sa_ok = (zplver >= ZPL_VERSION_SA); /* * Open parent object set so we can inherit zplprop values. */ if ((error = dmu_objset_hold(parentname, FTAG, &os)) != 0) return (error); error = zfs_fill_zplprops_impl(os, zplver, fuids_ok, sa_ok, createprops, zplprops, is_ci); dmu_objset_rele(os, FTAG); return (error); } static int zfs_fill_zplprops_root(uint64_t spa_vers, nvlist_t *createprops, nvlist_t *zplprops, boolean_t *is_ci) { boolean_t fuids_ok; boolean_t sa_ok; uint64_t zplver = ZPL_VERSION; int error; zplver = zfs_zpl_version_map(spa_vers); fuids_ok = (zplver >= ZPL_VERSION_FUID); sa_ok = (zplver >= ZPL_VERSION_SA); error = zfs_fill_zplprops_impl(NULL, zplver, fuids_ok, sa_ok, createprops, zplprops, is_ci); return (error); } /* * innvl: { * "type" -> dmu_objset_type_t (int32) * (optional) "props" -> { prop -> value } * } * * outnvl: propname -> error code (int32) */ static int zfs_ioc_create(const char *fsname, nvlist_t *innvl, nvlist_t *outnvl) { int error = 0; zfs_creat_t zct = { 0 }; nvlist_t *nvprops = NULL; void (*cbfunc)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx); int32_t type32; dmu_objset_type_t type; boolean_t is_insensitive = B_FALSE; if (nvlist_lookup_int32(innvl, "type", &type32) != 0) return (SET_ERROR(EINVAL)); type = type32; (void) nvlist_lookup_nvlist(innvl, "props", &nvprops); switch (type) { case DMU_OST_ZFS: cbfunc = zfs_create_cb; break; case DMU_OST_ZVOL: cbfunc = zvol_create_cb; break; default: cbfunc = NULL; break; } if (strchr(fsname, '@') || strchr(fsname, '%')) return (SET_ERROR(EINVAL)); zct.zct_props = nvprops; if (cbfunc == NULL) return (SET_ERROR(EINVAL)); if (type == DMU_OST_ZVOL) { uint64_t volsize, volblocksize; if (nvprops == NULL) return (SET_ERROR(EINVAL)); if (nvlist_lookup_uint64(nvprops, zfs_prop_to_name(ZFS_PROP_VOLSIZE), &volsize) != 0) return (SET_ERROR(EINVAL)); if ((error = nvlist_lookup_uint64(nvprops, zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE), &volblocksize)) != 0 && error != ENOENT) return (SET_ERROR(EINVAL)); if (error != 0) volblocksize = zfs_prop_default_numeric( ZFS_PROP_VOLBLOCKSIZE); if ((error = zvol_check_volblocksize( volblocksize)) != 0 || (error = zvol_check_volsize(volsize, volblocksize)) != 0) return (error); } else if (type == DMU_OST_ZFS) { int error; /* * We have to have normalization and * case-folding flags correct when we do the * file system creation, so go figure them out * now. */ VERIFY(nvlist_alloc(&zct.zct_zplprops, NV_UNIQUE_NAME, KM_SLEEP) == 0); error = zfs_fill_zplprops(fsname, nvprops, zct.zct_zplprops, &is_insensitive); if (error != 0) { nvlist_free(zct.zct_zplprops); return (error); } } error = dmu_objset_create(fsname, type, is_insensitive ? DS_FLAG_CI_DATASET : 0, cbfunc, &zct); nvlist_free(zct.zct_zplprops); /* * It would be nice to do this atomically. */ if (error == 0) { error = zfs_set_prop_nvlist(fsname, ZPROP_SRC_LOCAL, nvprops, outnvl); if (error != 0) (void) dsl_destroy_head(fsname); } #ifdef __FreeBSD__ if (error == 0 && type == DMU_OST_ZVOL) zvol_create_minors(fsname); #endif return (error); } /* * innvl: { * "origin" -> name of origin snapshot * (optional) "props" -> { prop -> value } * } * * outnvl: propname -> error code (int32) */ static int zfs_ioc_clone(const char *fsname, nvlist_t *innvl, nvlist_t *outnvl) { int error = 0; nvlist_t *nvprops = NULL; char *origin_name; if (nvlist_lookup_string(innvl, "origin", &origin_name) != 0) return (SET_ERROR(EINVAL)); (void) nvlist_lookup_nvlist(innvl, "props", &nvprops); if (strchr(fsname, '@') || strchr(fsname, '%')) return (SET_ERROR(EINVAL)); if (dataset_namecheck(origin_name, NULL, NULL) != 0) return (SET_ERROR(EINVAL)); error = dmu_objset_clone(fsname, origin_name); if (error != 0) return (error); /* * It would be nice to do this atomically. */ if (error == 0) { error = zfs_set_prop_nvlist(fsname, ZPROP_SRC_LOCAL, nvprops, outnvl); if (error != 0) (void) dsl_destroy_head(fsname); } #ifdef __FreeBSD__ if (error == 0) zvol_create_minors(fsname); #endif return (error); } /* ARGSUSED */ static int zfs_ioc_remap(const char *fsname, nvlist_t *innvl, nvlist_t *outnvl) { if (strchr(fsname, '@') || strchr(fsname, '%')) return (SET_ERROR(EINVAL)); return (dmu_objset_remap_indirects(fsname)); } /* * innvl: { * "snaps" -> { snapshot1, snapshot2 } * (optional) "props" -> { prop -> value (string) } * } * * outnvl: snapshot -> error code (int32) */ static int zfs_ioc_snapshot(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl) { nvlist_t *snaps; nvlist_t *props = NULL; int error, poollen; nvpair_t *pair; (void) nvlist_lookup_nvlist(innvl, "props", &props); if ((error = zfs_check_userprops(poolname, props)) != 0) return (error); if (!nvlist_empty(props) && zfs_earlier_version(poolname, SPA_VERSION_SNAP_PROPS)) return (SET_ERROR(ENOTSUP)); if (nvlist_lookup_nvlist(innvl, "snaps", &snaps) != 0) return (SET_ERROR(EINVAL)); poollen = strlen(poolname); for (pair = nvlist_next_nvpair(snaps, NULL); pair != NULL; pair = nvlist_next_nvpair(snaps, pair)) { const char *name = nvpair_name(pair); const char *cp = strchr(name, '@'); /* * The snap name must contain an @, and the part after it must * contain only valid characters. */ if (cp == NULL || zfs_component_namecheck(cp + 1, NULL, NULL) != 0) return (SET_ERROR(EINVAL)); /* * The snap must be in the specified pool. */ if (strncmp(name, poolname, poollen) != 0 || (name[poollen] != '/' && name[poollen] != '@')) return (SET_ERROR(EXDEV)); /* This must be the only snap of this fs. */ for (nvpair_t *pair2 = nvlist_next_nvpair(snaps, pair); pair2 != NULL; pair2 = nvlist_next_nvpair(snaps, pair2)) { if (strncmp(name, nvpair_name(pair2), cp - name + 1) == 0) { return (SET_ERROR(EXDEV)); } } } error = dsl_dataset_snapshot(snaps, props, outnvl); return (error); } /* * innvl: "message" -> string */ /* ARGSUSED */ static int zfs_ioc_log_history(const char *unused, nvlist_t *innvl, nvlist_t *outnvl) { char *message; spa_t *spa; int error; char *poolname; /* * The poolname in the ioctl is not set, we get it from the TSD, * which was set at the end of the last successful ioctl that allows * logging. The secpolicy func already checked that it is set. * Only one log ioctl is allowed after each successful ioctl, so * we clear the TSD here. */ poolname = tsd_get(zfs_allow_log_key); (void) tsd_set(zfs_allow_log_key, NULL); error = spa_open(poolname, &spa, FTAG); strfree(poolname); if (error != 0) return (error); if (nvlist_lookup_string(innvl, "message", &message) != 0) { spa_close(spa, FTAG); return (SET_ERROR(EINVAL)); } if (spa_version(spa) < SPA_VERSION_ZPOOL_HISTORY) { spa_close(spa, FTAG); return (SET_ERROR(ENOTSUP)); } error = spa_history_log(spa, message); spa_close(spa, FTAG); return (error); } #ifdef __FreeBSD__ static int zfs_ioc_nextboot(const char *unused, nvlist_t *innvl, nvlist_t *outnvl) { char name[MAXNAMELEN]; spa_t *spa; vdev_t *vd; char *command; uint64_t pool_guid; uint64_t vdev_guid; int error; if (nvlist_lookup_uint64(innvl, ZPOOL_CONFIG_POOL_GUID, &pool_guid) != 0) return (EINVAL); if (nvlist_lookup_uint64(innvl, ZPOOL_CONFIG_GUID, &vdev_guid) != 0) return (EINVAL); if (nvlist_lookup_string(innvl, "command", &command) != 0) return (EINVAL); mutex_enter(&spa_namespace_lock); spa = spa_by_guid(pool_guid, vdev_guid); if (spa != NULL) strcpy(name, spa_name(spa)); mutex_exit(&spa_namespace_lock); if (spa == NULL) return (ENOENT); if ((error = spa_open(name, &spa, FTAG)) != 0) return (error); spa_vdev_state_enter(spa, SCL_ALL); vd = spa_lookup_by_guid(spa, vdev_guid, B_TRUE); if (vd == NULL) { (void) spa_vdev_state_exit(spa, NULL, ENXIO); spa_close(spa, FTAG); return (ENODEV); } error = vdev_label_write_pad2(vd, command, strlen(command)); (void) spa_vdev_state_exit(spa, NULL, 0); txg_wait_synced(spa->spa_dsl_pool, 0); spa_close(spa, FTAG); return (error); } #endif /* * The dp_config_rwlock must not be held when calling this, because the * unmount may need to write out data. * * This function is best-effort. Callers must deal gracefully if it * remains mounted (or is remounted after this call). * * Returns 0 if the argument is not a snapshot, or it is not currently a * filesystem, or we were able to unmount it. Returns error code otherwise. */ void zfs_unmount_snap(const char *snapname) { vfs_t *vfsp = NULL; zfsvfs_t *zfsvfs = NULL; if (strchr(snapname, '@') == NULL) return; int err = getzfsvfs(snapname, &zfsvfs); if (err != 0) { ASSERT3P(zfsvfs, ==, NULL); return; } vfsp = zfsvfs->z_vfs; ASSERT(!dsl_pool_config_held(dmu_objset_pool(zfsvfs->z_os))); #ifdef illumos err = vn_vfswlock(vfsp->vfs_vnodecovered); VFS_RELE(vfsp); if (err != 0) return; #endif /* * Always force the unmount for snapshots. */ #ifdef illumos (void) dounmount(vfsp, MS_FORCE, kcred); #else vfs_ref(vfsp); vfs_unbusy(vfsp); (void) dounmount(vfsp, MS_FORCE, curthread); #endif } /* ARGSUSED */ static int zfs_unmount_snap_cb(const char *snapname, void *arg) { zfs_unmount_snap(snapname); return (0); } /* * When a clone is destroyed, its origin may also need to be destroyed, * in which case it must be unmounted. This routine will do that unmount * if necessary. */ void zfs_destroy_unmount_origin(const char *fsname) { int error; objset_t *os; dsl_dataset_t *ds; error = dmu_objset_hold(fsname, FTAG, &os); if (error != 0) return; ds = dmu_objset_ds(os); if (dsl_dir_is_clone(ds->ds_dir) && DS_IS_DEFER_DESTROY(ds->ds_prev)) { char originname[ZFS_MAX_DATASET_NAME_LEN]; dsl_dataset_name(ds->ds_prev, originname); dmu_objset_rele(os, FTAG); zfs_unmount_snap(originname); } else { dmu_objset_rele(os, FTAG); } } /* * innvl: { * "snaps" -> { snapshot1, snapshot2 } * (optional boolean) "defer" * } * * outnvl: snapshot -> error code (int32) * */ /* ARGSUSED */ static int zfs_ioc_destroy_snaps(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl) { int error, poollen; nvlist_t *snaps; nvpair_t *pair; boolean_t defer; if (nvlist_lookup_nvlist(innvl, "snaps", &snaps) != 0) return (SET_ERROR(EINVAL)); defer = nvlist_exists(innvl, "defer"); poollen = strlen(poolname); for (pair = nvlist_next_nvpair(snaps, NULL); pair != NULL; pair = nvlist_next_nvpair(snaps, pair)) { const char *name = nvpair_name(pair); /* * The snap must be in the specified pool to prevent the * invalid removal of zvol minors below. */ if (strncmp(name, poolname, poollen) != 0 || (name[poollen] != '/' && name[poollen] != '@')) return (SET_ERROR(EXDEV)); zfs_unmount_snap(nvpair_name(pair)); #if defined(__FreeBSD__) zvol_remove_minors(name); #endif } return (dsl_destroy_snapshots_nvl(snaps, defer, outnvl)); } /* * Create bookmarks. Bookmark names are of the form #. * All bookmarks must be in the same pool. * * innvl: { * bookmark1 -> snapshot1, bookmark2 -> snapshot2 * } * * outnvl: bookmark -> error code (int32) * */ /* ARGSUSED */ static int zfs_ioc_bookmark(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl) { for (nvpair_t *pair = nvlist_next_nvpair(innvl, NULL); pair != NULL; pair = nvlist_next_nvpair(innvl, pair)) { char *snap_name; /* * Verify the snapshot argument. */ if (nvpair_value_string(pair, &snap_name) != 0) return (SET_ERROR(EINVAL)); /* Verify that the keys (bookmarks) are unique */ for (nvpair_t *pair2 = nvlist_next_nvpair(innvl, pair); pair2 != NULL; pair2 = nvlist_next_nvpair(innvl, pair2)) { if (strcmp(nvpair_name(pair), nvpair_name(pair2)) == 0) return (SET_ERROR(EINVAL)); } } return (dsl_bookmark_create(innvl, outnvl)); } /* * innvl: { * property 1, property 2, ... * } * * outnvl: { * bookmark name 1 -> { property 1, property 2, ... }, * bookmark name 2 -> { property 1, property 2, ... } * } * */ static int zfs_ioc_get_bookmarks(const char *fsname, nvlist_t *innvl, nvlist_t *outnvl) { return (dsl_get_bookmarks(fsname, innvl, outnvl)); } /* * innvl: { * bookmark name 1, bookmark name 2 * } * * outnvl: bookmark -> error code (int32) * */ static int zfs_ioc_destroy_bookmarks(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl) { int error, poollen; poollen = strlen(poolname); for (nvpair_t *pair = nvlist_next_nvpair(innvl, NULL); pair != NULL; pair = nvlist_next_nvpair(innvl, pair)) { const char *name = nvpair_name(pair); const char *cp = strchr(name, '#'); /* * The bookmark name must contain an #, and the part after it * must contain only valid characters. */ if (cp == NULL || zfs_component_namecheck(cp + 1, NULL, NULL) != 0) return (SET_ERROR(EINVAL)); /* * The bookmark must be in the specified pool. */ if (strncmp(name, poolname, poollen) != 0 || (name[poollen] != '/' && name[poollen] != '#')) return (SET_ERROR(EXDEV)); } error = dsl_bookmark_destroy(innvl, outnvl); return (error); } static int zfs_ioc_channel_program(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl) { char *program; uint64_t instrlimit, memlimit; boolean_t sync_flag; nvpair_t *nvarg = NULL; if (0 != nvlist_lookup_string(innvl, ZCP_ARG_PROGRAM, &program)) { return (EINVAL); } if (0 != nvlist_lookup_boolean_value(innvl, ZCP_ARG_SYNC, &sync_flag)) { sync_flag = B_TRUE; } if (0 != nvlist_lookup_uint64(innvl, ZCP_ARG_INSTRLIMIT, &instrlimit)) { instrlimit = ZCP_DEFAULT_INSTRLIMIT; } if (0 != nvlist_lookup_uint64(innvl, ZCP_ARG_MEMLIMIT, &memlimit)) { memlimit = ZCP_DEFAULT_MEMLIMIT; } if (0 != nvlist_lookup_nvpair(innvl, ZCP_ARG_ARGLIST, &nvarg)) { return (EINVAL); } if (instrlimit == 0 || instrlimit > zfs_lua_max_instrlimit) return (EINVAL); if (memlimit == 0 || memlimit > zfs_lua_max_memlimit) return (EINVAL); return (zcp_eval(poolname, program, sync_flag, instrlimit, memlimit, nvarg, outnvl)); } /* * innvl: unused * outnvl: empty */ /* ARGSUSED */ static int zfs_ioc_pool_checkpoint(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl) { return (spa_checkpoint(poolname)); } /* * innvl: unused * outnvl: empty */ /* ARGSUSED */ static int zfs_ioc_pool_discard_checkpoint(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl) { return (spa_checkpoint_discard(poolname)); } /* * inputs: * zc_name name of dataset to destroy * zc_defer_destroy mark for deferred destroy * * outputs: none */ static int zfs_ioc_destroy(zfs_cmd_t *zc) { objset_t *os; dmu_objset_type_t ost; int err; err = dmu_objset_hold(zc->zc_name, FTAG, &os); if (err != 0) return (err); ost = dmu_objset_type(os); dmu_objset_rele(os, FTAG); if (ost == DMU_OST_ZFS) zfs_unmount_snap(zc->zc_name); if (strchr(zc->zc_name, '@')) err = dsl_destroy_snapshot(zc->zc_name, zc->zc_defer_destroy); else err = dsl_destroy_head(zc->zc_name); if (ost == DMU_OST_ZVOL && err == 0) #ifdef __FreeBSD__ zvol_remove_minors(zc->zc_name); #else (void) zvol_remove_minor(zc->zc_name); #endif return (err); } /* * innvl: { * vdevs: { * guid 1, guid 2, ... * }, * func: POOL_INITIALIZE_{CANCEL|DO|SUSPEND} * } * * outnvl: { * [func: EINVAL (if provided command type didn't make sense)], * [vdevs: { * guid1: errno, (see function body for possible errnos) * ... * }] * } * */ static int zfs_ioc_pool_initialize(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl) { spa_t *spa; int error; error = spa_open(poolname, &spa, FTAG); if (error != 0) return (error); uint64_t cmd_type; if (nvlist_lookup_uint64(innvl, ZPOOL_INITIALIZE_COMMAND, &cmd_type) != 0) { spa_close(spa, FTAG); return (SET_ERROR(EINVAL)); } if (!(cmd_type == POOL_INITIALIZE_CANCEL || cmd_type == POOL_INITIALIZE_DO || cmd_type == POOL_INITIALIZE_SUSPEND)) { spa_close(spa, FTAG); return (SET_ERROR(EINVAL)); } nvlist_t *vdev_guids; if (nvlist_lookup_nvlist(innvl, ZPOOL_INITIALIZE_VDEVS, &vdev_guids) != 0) { spa_close(spa, FTAG); return (SET_ERROR(EINVAL)); } nvlist_t *vdev_errlist = fnvlist_alloc(); int total_errors = 0; for (nvpair_t *pair = nvlist_next_nvpair(vdev_guids, NULL); pair != NULL; pair = nvlist_next_nvpair(vdev_guids, pair)) { uint64_t vdev_guid = fnvpair_value_uint64(pair); error = spa_vdev_initialize(spa, vdev_guid, cmd_type); if (error != 0) { char guid_as_str[MAXNAMELEN]; (void) snprintf(guid_as_str, sizeof (guid_as_str), "%llu", (unsigned long long)vdev_guid); fnvlist_add_int64(vdev_errlist, guid_as_str, error); total_errors++; } } if (fnvlist_size(vdev_errlist) > 0) { fnvlist_add_nvlist(outnvl, ZPOOL_INITIALIZE_VDEVS, vdev_errlist); } fnvlist_free(vdev_errlist); spa_close(spa, FTAG); return (total_errors > 0 ? EINVAL : 0); } /* * fsname is name of dataset to rollback (to most recent snapshot) * * innvl may contain name of expected target snapshot * * outnvl: "target" -> name of most recent snapshot * } */ /* ARGSUSED */ static int zfs_ioc_rollback(const char *fsname, nvlist_t *innvl, nvlist_t *outnvl) { zfsvfs_t *zfsvfs; char *target = NULL; int error; (void) nvlist_lookup_string(innvl, "target", &target); if (target != NULL) { const char *cp = strchr(target, '@'); /* * The snap name must contain an @, and the part after it must * contain only valid characters. */ if (cp == NULL || zfs_component_namecheck(cp + 1, NULL, NULL) != 0) return (SET_ERROR(EINVAL)); } if (getzfsvfs(fsname, &zfsvfs) == 0) { dsl_dataset_t *ds; ds = dmu_objset_ds(zfsvfs->z_os); error = zfs_suspend_fs(zfsvfs); if (error == 0) { int resume_err; error = dsl_dataset_rollback(fsname, target, zfsvfs, outnvl); resume_err = zfs_resume_fs(zfsvfs, ds); error = error ? error : resume_err; } #ifdef illumos VFS_RELE(zfsvfs->z_vfs); #else vfs_unbusy(zfsvfs->z_vfs); #endif } else { error = dsl_dataset_rollback(fsname, target, NULL, outnvl); } return (error); } static int recursive_unmount(const char *fsname, void *arg) { const char *snapname = arg; char fullname[ZFS_MAX_DATASET_NAME_LEN]; (void) snprintf(fullname, sizeof (fullname), "%s@%s", fsname, snapname); zfs_unmount_snap(fullname); return (0); } /* * inputs: * zc_name old name of dataset * zc_value new name of dataset * zc_cookie recursive flag (only valid for snapshots) * * outputs: none */ static int zfs_ioc_rename(zfs_cmd_t *zc) { objset_t *os; dmu_objset_type_t ost; boolean_t recursive = zc->zc_cookie & 1; char *at; boolean_t allow_mounted = B_TRUE; int err; #ifdef __FreeBSD__ allow_mounted = (zc->zc_cookie & 2) != 0; #endif /* "zfs rename" from and to ...%recv datasets should both fail */ zc->zc_name[sizeof (zc->zc_name) - 1] = '\0'; zc->zc_value[sizeof (zc->zc_value) - 1] = '\0'; if (dataset_namecheck(zc->zc_name, NULL, NULL) != 0 || dataset_namecheck(zc->zc_value, NULL, NULL) != 0 || strchr(zc->zc_name, '%') || strchr(zc->zc_value, '%')) return (SET_ERROR(EINVAL)); err = dmu_objset_hold(zc->zc_name, FTAG, &os); if (err != 0) return (err); ost = dmu_objset_type(os); dmu_objset_rele(os, FTAG); at = strchr(zc->zc_name, '@'); if (at != NULL) { /* snaps must be in same fs */ int error; if (strncmp(zc->zc_name, zc->zc_value, at - zc->zc_name + 1)) return (SET_ERROR(EXDEV)); *at = '\0'; if (ost == DMU_OST_ZFS && !allow_mounted) { error = dmu_objset_find(zc->zc_name, recursive_unmount, at + 1, recursive ? DS_FIND_CHILDREN : 0); if (error != 0) { *at = '@'; return (error); } } error = dsl_dataset_rename_snapshot(zc->zc_name, at + 1, strchr(zc->zc_value, '@') + 1, recursive); *at = '@'; return (error); } else { #ifdef illumos if (ost == DMU_OST_ZVOL) (void) zvol_remove_minor(zc->zc_name); #endif return (dsl_dir_rename(zc->zc_name, zc->zc_value)); } } static int zfs_check_settable(const char *dsname, nvpair_t *pair, cred_t *cr) { const char *propname = nvpair_name(pair); boolean_t issnap = (strchr(dsname, '@') != NULL); zfs_prop_t prop = zfs_name_to_prop(propname); uint64_t intval; int err; if (prop == ZPROP_INVAL) { if (zfs_prop_user(propname)) { if (err = zfs_secpolicy_write_perms(dsname, ZFS_DELEG_PERM_USERPROP, cr)) return (err); return (0); } if (!issnap && zfs_prop_userquota(propname)) { const char *perm = NULL; const char *uq_prefix = zfs_userquota_prop_prefixes[ZFS_PROP_USERQUOTA]; const char *gq_prefix = zfs_userquota_prop_prefixes[ZFS_PROP_GROUPQUOTA]; if (strncmp(propname, uq_prefix, strlen(uq_prefix)) == 0) { perm = ZFS_DELEG_PERM_USERQUOTA; } else if (strncmp(propname, gq_prefix, strlen(gq_prefix)) == 0) { perm = ZFS_DELEG_PERM_GROUPQUOTA; } else { /* USERUSED and GROUPUSED are read-only */ return (SET_ERROR(EINVAL)); } if (err = zfs_secpolicy_write_perms(dsname, perm, cr)) return (err); return (0); } return (SET_ERROR(EINVAL)); } if (issnap) return (SET_ERROR(EINVAL)); if (nvpair_type(pair) == DATA_TYPE_NVLIST) { /* * dsl_prop_get_all_impl() returns properties in this * format. */ nvlist_t *attrs; VERIFY(nvpair_value_nvlist(pair, &attrs) == 0); VERIFY(nvlist_lookup_nvpair(attrs, ZPROP_VALUE, &pair) == 0); } /* * Check that this value is valid for this pool version */ switch (prop) { case ZFS_PROP_COMPRESSION: /* * If the user specified gzip compression, make sure * the SPA supports it. We ignore any errors here since * we'll catch them later. */ if (nvpair_value_uint64(pair, &intval) == 0) { if (intval >= ZIO_COMPRESS_GZIP_1 && intval <= ZIO_COMPRESS_GZIP_9 && zfs_earlier_version(dsname, SPA_VERSION_GZIP_COMPRESSION)) { return (SET_ERROR(ENOTSUP)); } if (intval == ZIO_COMPRESS_ZLE && zfs_earlier_version(dsname, SPA_VERSION_ZLE_COMPRESSION)) return (SET_ERROR(ENOTSUP)); if (intval == ZIO_COMPRESS_LZ4) { spa_t *spa; if ((err = spa_open(dsname, &spa, FTAG)) != 0) return (err); if (!spa_feature_is_enabled(spa, SPA_FEATURE_LZ4_COMPRESS)) { spa_close(spa, FTAG); return (SET_ERROR(ENOTSUP)); } spa_close(spa, FTAG); } /* * If this is a bootable dataset then * verify that the compression algorithm * is supported for booting. We must return * something other than ENOTSUP since it * implies a downrev pool version. */ if (zfs_is_bootfs(dsname) && !BOOTFS_COMPRESS_VALID(intval)) { return (SET_ERROR(ERANGE)); } } break; case ZFS_PROP_COPIES: if (zfs_earlier_version(dsname, SPA_VERSION_DITTO_BLOCKS)) return (SET_ERROR(ENOTSUP)); break; case ZFS_PROP_RECORDSIZE: /* Record sizes above 128k need the feature to be enabled */ if (nvpair_value_uint64(pair, &intval) == 0 && intval > SPA_OLD_MAXBLOCKSIZE) { spa_t *spa; /* * We don't allow setting the property above 1MB, * unless the tunable has been changed. */ if (intval > zfs_max_recordsize || intval > SPA_MAXBLOCKSIZE) return (SET_ERROR(ERANGE)); if ((err = spa_open(dsname, &spa, FTAG)) != 0) return (err); if (!spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_BLOCKS)) { spa_close(spa, FTAG); return (SET_ERROR(ENOTSUP)); } spa_close(spa, FTAG); } break; case ZFS_PROP_DNODESIZE: /* Dnode sizes above 512 need the feature to be enabled */ if (nvpair_value_uint64(pair, &intval) == 0 && intval != ZFS_DNSIZE_LEGACY) { spa_t *spa; if ((err = spa_open(dsname, &spa, FTAG)) != 0) return (err); if (!spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_DNODE)) { spa_close(spa, FTAG); return (SET_ERROR(ENOTSUP)); } spa_close(spa, FTAG); } break; case ZFS_PROP_SHARESMB: if (zpl_earlier_version(dsname, ZPL_VERSION_FUID)) return (SET_ERROR(ENOTSUP)); break; case ZFS_PROP_ACLINHERIT: if (nvpair_type(pair) == DATA_TYPE_UINT64 && nvpair_value_uint64(pair, &intval) == 0) { if (intval == ZFS_ACL_PASSTHROUGH_X && zfs_earlier_version(dsname, SPA_VERSION_PASSTHROUGH_X)) return (SET_ERROR(ENOTSUP)); } break; case ZFS_PROP_CHECKSUM: case ZFS_PROP_DEDUP: { spa_feature_t feature; spa_t *spa; /* dedup feature version checks */ if (prop == ZFS_PROP_DEDUP && zfs_earlier_version(dsname, SPA_VERSION_DEDUP)) return (SET_ERROR(ENOTSUP)); if (nvpair_value_uint64(pair, &intval) != 0) return (SET_ERROR(EINVAL)); /* check prop value is enabled in features */ feature = zio_checksum_to_feature(intval & ZIO_CHECKSUM_MASK); if (feature == SPA_FEATURE_NONE) break; if ((err = spa_open(dsname, &spa, FTAG)) != 0) return (err); /* * Salted checksums are not supported on root pools. */ if (spa_bootfs(spa) != 0 && intval < ZIO_CHECKSUM_FUNCTIONS && (zio_checksum_table[intval].ci_flags & ZCHECKSUM_FLAG_SALTED)) { spa_close(spa, FTAG); return (SET_ERROR(ERANGE)); } if (!spa_feature_is_enabled(spa, feature)) { spa_close(spa, FTAG); return (SET_ERROR(ENOTSUP)); } spa_close(spa, FTAG); break; } } return (zfs_secpolicy_setprop(dsname, prop, pair, CRED())); } /* * Checks for a race condition to make sure we don't increment a feature flag * multiple times. */ static int zfs_prop_activate_feature_check(void *arg, dmu_tx_t *tx) { spa_t *spa = dmu_tx_pool(tx)->dp_spa; spa_feature_t *featurep = arg; if (!spa_feature_is_active(spa, *featurep)) return (0); else return (SET_ERROR(EBUSY)); } /* * The callback invoked on feature activation in the sync task caused by * zfs_prop_activate_feature. */ static void zfs_prop_activate_feature_sync(void *arg, dmu_tx_t *tx) { spa_t *spa = dmu_tx_pool(tx)->dp_spa; spa_feature_t *featurep = arg; spa_feature_incr(spa, *featurep, tx); } /* * Activates a feature on a pool in response to a property setting. This * creates a new sync task which modifies the pool to reflect the feature * as being active. */ static int zfs_prop_activate_feature(spa_t *spa, spa_feature_t feature) { int err; /* EBUSY here indicates that the feature is already active */ err = dsl_sync_task(spa_name(spa), zfs_prop_activate_feature_check, zfs_prop_activate_feature_sync, &feature, 2, ZFS_SPACE_CHECK_RESERVED); if (err != 0 && err != EBUSY) return (err); else return (0); } /* * Removes properties from the given props list that fail permission checks * needed to clear them and to restore them in case of a receive error. For each * property, make sure we have both set and inherit permissions. * * Returns the first error encountered if any permission checks fail. If the * caller provides a non-NULL errlist, it also gives the complete list of names * of all the properties that failed a permission check along with the * corresponding error numbers. The caller is responsible for freeing the * returned errlist. * * If every property checks out successfully, zero is returned and the list * pointed at by errlist is NULL. */ static int zfs_check_clearable(char *dataset, nvlist_t *props, nvlist_t **errlist) { zfs_cmd_t *zc; nvpair_t *pair, *next_pair; nvlist_t *errors; int err, rv = 0; if (props == NULL) return (0); VERIFY(nvlist_alloc(&errors, NV_UNIQUE_NAME, KM_SLEEP) == 0); zc = kmem_alloc(sizeof (zfs_cmd_t), KM_SLEEP); (void) strcpy(zc->zc_name, dataset); pair = nvlist_next_nvpair(props, NULL); while (pair != NULL) { next_pair = nvlist_next_nvpair(props, pair); (void) strcpy(zc->zc_value, nvpair_name(pair)); if ((err = zfs_check_settable(dataset, pair, CRED())) != 0 || (err = zfs_secpolicy_inherit_prop(zc, NULL, CRED())) != 0) { VERIFY(nvlist_remove_nvpair(props, pair) == 0); VERIFY(nvlist_add_int32(errors, zc->zc_value, err) == 0); } pair = next_pair; } kmem_free(zc, sizeof (zfs_cmd_t)); if ((pair = nvlist_next_nvpair(errors, NULL)) == NULL) { nvlist_free(errors); errors = NULL; } else { VERIFY(nvpair_value_int32(pair, &rv) == 0); } if (errlist == NULL) nvlist_free(errors); else *errlist = errors; return (rv); } static boolean_t propval_equals(nvpair_t *p1, nvpair_t *p2) { if (nvpair_type(p1) == DATA_TYPE_NVLIST) { /* dsl_prop_get_all_impl() format */ nvlist_t *attrs; VERIFY(nvpair_value_nvlist(p1, &attrs) == 0); VERIFY(nvlist_lookup_nvpair(attrs, ZPROP_VALUE, &p1) == 0); } if (nvpair_type(p2) == DATA_TYPE_NVLIST) { nvlist_t *attrs; VERIFY(nvpair_value_nvlist(p2, &attrs) == 0); VERIFY(nvlist_lookup_nvpair(attrs, ZPROP_VALUE, &p2) == 0); } if (nvpair_type(p1) != nvpair_type(p2)) return (B_FALSE); if (nvpair_type(p1) == DATA_TYPE_STRING) { char *valstr1, *valstr2; VERIFY(nvpair_value_string(p1, (char **)&valstr1) == 0); VERIFY(nvpair_value_string(p2, (char **)&valstr2) == 0); return (strcmp(valstr1, valstr2) == 0); } else { uint64_t intval1, intval2; VERIFY(nvpair_value_uint64(p1, &intval1) == 0); VERIFY(nvpair_value_uint64(p2, &intval2) == 0); return (intval1 == intval2); } } /* * Remove properties from props if they are not going to change (as determined * by comparison with origprops). Remove them from origprops as well, since we * do not need to clear or restore properties that won't change. */ static void props_reduce(nvlist_t *props, nvlist_t *origprops) { nvpair_t *pair, *next_pair; if (origprops == NULL) return; /* all props need to be received */ pair = nvlist_next_nvpair(props, NULL); while (pair != NULL) { const char *propname = nvpair_name(pair); nvpair_t *match; next_pair = nvlist_next_nvpair(props, pair); if ((nvlist_lookup_nvpair(origprops, propname, &match) != 0) || !propval_equals(pair, match)) goto next; /* need to set received value */ /* don't clear the existing received value */ (void) nvlist_remove_nvpair(origprops, match); /* don't bother receiving the property */ (void) nvlist_remove_nvpair(props, pair); next: pair = next_pair; } } /* * Extract properties that cannot be set PRIOR to the receipt of a dataset. * For example, refquota cannot be set until after the receipt of a dataset, * because in replication streams, an older/earlier snapshot may exceed the * refquota. We want to receive the older/earlier snapshot, but setting * refquota pre-receipt will set the dsl's ACTUAL quota, which will prevent * the older/earlier snapshot from being received (with EDQUOT). * * The ZFS test "zfs_receive_011_pos" demonstrates such a scenario. * * libzfs will need to be judicious handling errors encountered by props * extracted by this function. */ static nvlist_t * extract_delay_props(nvlist_t *props) { nvlist_t *delayprops; nvpair_t *nvp, *tmp; static const zfs_prop_t delayable[] = { ZFS_PROP_REFQUOTA, 0 }; int i; VERIFY(nvlist_alloc(&delayprops, NV_UNIQUE_NAME, KM_SLEEP) == 0); for (nvp = nvlist_next_nvpair(props, NULL); nvp != NULL; nvp = nvlist_next_nvpair(props, nvp)) { /* * strcmp() is safe because zfs_prop_to_name() always returns * a bounded string. */ for (i = 0; delayable[i] != 0; i++) { if (strcmp(zfs_prop_to_name(delayable[i]), nvpair_name(nvp)) == 0) { break; } } if (delayable[i] != 0) { tmp = nvlist_prev_nvpair(props, nvp); VERIFY(nvlist_add_nvpair(delayprops, nvp) == 0); VERIFY(nvlist_remove_nvpair(props, nvp) == 0); nvp = tmp; } } if (nvlist_empty(delayprops)) { nvlist_free(delayprops); delayprops = NULL; } return (delayprops); } #ifdef DEBUG static boolean_t zfs_ioc_recv_inject_err; #endif /* * inputs: * zc_name name of containing filesystem * zc_nvlist_src{_size} nvlist of properties to apply * zc_value name of snapshot to create * zc_string name of clone origin (if DRR_FLAG_CLONE) * zc_cookie file descriptor to recv from * zc_begin_record the BEGIN record of the stream (not byteswapped) * zc_guid force flag * zc_cleanup_fd cleanup-on-exit file descriptor * zc_action_handle handle for this guid/ds mapping (or zero on first call) * zc_resumable if data is incomplete assume sender will resume * * outputs: * zc_cookie number of bytes read * zc_nvlist_dst{_size} error for each unapplied received property * zc_obj zprop_errflags_t * zc_action_handle handle for this guid/ds mapping */ static int zfs_ioc_recv(zfs_cmd_t *zc) { file_t *fp; dmu_recv_cookie_t drc; boolean_t force = (boolean_t)zc->zc_guid; int fd; int error = 0; int props_error = 0; nvlist_t *errors; offset_t off; nvlist_t *props = NULL; /* sent properties */ nvlist_t *origprops = NULL; /* existing properties */ nvlist_t *delayprops = NULL; /* sent properties applied post-receive */ char *origin = NULL; char *tosnap; char tofs[ZFS_MAX_DATASET_NAME_LEN]; boolean_t first_recvd_props = B_FALSE; if (dataset_namecheck(zc->zc_value, NULL, NULL) != 0 || strchr(zc->zc_value, '@') == NULL || strchr(zc->zc_value, '%')) return (SET_ERROR(EINVAL)); (void) strcpy(tofs, zc->zc_value); tosnap = strchr(tofs, '@'); *tosnap++ = '\0'; if (zc->zc_nvlist_src != 0 && (error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &props)) != 0) return (error); fd = zc->zc_cookie; #ifdef illumos fp = getf(fd); #else fget_read(curthread, fd, &cap_pread_rights, &fp); #endif if (fp == NULL) { nvlist_free(props); return (SET_ERROR(EBADF)); } errors = fnvlist_alloc(); if (zc->zc_string[0]) origin = zc->zc_string; error = dmu_recv_begin(tofs, tosnap, &zc->zc_begin_record, force, zc->zc_resumable, origin, &drc); if (error != 0) goto out; /* * Set properties before we receive the stream so that they are applied * to the new data. Note that we must call dmu_recv_stream() if * dmu_recv_begin() succeeds. */ if (props != NULL && !drc.drc_newfs) { if (spa_version(dsl_dataset_get_spa(drc.drc_ds)) >= SPA_VERSION_RECVD_PROPS && !dsl_prop_get_hasrecvd(tofs)) first_recvd_props = B_TRUE; /* * If new received properties are supplied, they are to * completely replace the existing received properties, so stash * away the existing ones. */ if (dsl_prop_get_received(tofs, &origprops) == 0) { nvlist_t *errlist = NULL; /* * Don't bother writing a property if its value won't * change (and avoid the unnecessary security checks). * * The first receive after SPA_VERSION_RECVD_PROPS is a * special case where we blow away all local properties * regardless. */ if (!first_recvd_props) props_reduce(props, origprops); if (zfs_check_clearable(tofs, origprops, &errlist) != 0) (void) nvlist_merge(errors, errlist, 0); nvlist_free(errlist); if (clear_received_props(tofs, origprops, first_recvd_props ? NULL : props) != 0) zc->zc_obj |= ZPROP_ERR_NOCLEAR; } else { zc->zc_obj |= ZPROP_ERR_NOCLEAR; } } if (props != NULL) { props_error = dsl_prop_set_hasrecvd(tofs); if (props_error == 0) { delayprops = extract_delay_props(props); (void) zfs_set_prop_nvlist(tofs, ZPROP_SRC_RECEIVED, props, errors); } } off = fp->f_offset; error = dmu_recv_stream(&drc, fp, &off, zc->zc_cleanup_fd, &zc->zc_action_handle); if (error == 0) { zfsvfs_t *zfsvfs = NULL; if (getzfsvfs(tofs, &zfsvfs) == 0) { /* online recv */ dsl_dataset_t *ds; int end_err; ds = dmu_objset_ds(zfsvfs->z_os); error = zfs_suspend_fs(zfsvfs); /* * If the suspend fails, then the recv_end will * likely also fail, and clean up after itself. */ end_err = dmu_recv_end(&drc, zfsvfs); if (error == 0) error = zfs_resume_fs(zfsvfs, ds); error = error ? error : end_err; #ifdef illumos VFS_RELE(zfsvfs->z_vfs); #else vfs_unbusy(zfsvfs->z_vfs); #endif } else { error = dmu_recv_end(&drc, NULL); } /* Set delayed properties now, after we're done receiving. */ if (delayprops != NULL && error == 0) { (void) zfs_set_prop_nvlist(tofs, ZPROP_SRC_RECEIVED, delayprops, errors); } } if (delayprops != NULL) { /* * Merge delayed props back in with initial props, in case * we're DEBUG and zfs_ioc_recv_inject_err is set (which means * we have to make sure clear_received_props() includes * the delayed properties). * * Since zfs_ioc_recv_inject_err is only in DEBUG kernels, * using ASSERT() will be just like a VERIFY. */ ASSERT(nvlist_merge(props, delayprops, 0) == 0); nvlist_free(delayprops); } /* * Now that all props, initial and delayed, are set, report the prop * errors to the caller. */ if (zc->zc_nvlist_dst_size != 0 && (nvlist_smush(errors, zc->zc_nvlist_dst_size) != 0 || put_nvlist(zc, errors) != 0)) { /* * Caller made zc->zc_nvlist_dst less than the minimum expected * size or supplied an invalid address. */ props_error = SET_ERROR(EINVAL); } zc->zc_cookie = off - fp->f_offset; if (off >= 0 && off <= MAXOFFSET_T) fp->f_offset = off; #ifdef DEBUG if (zfs_ioc_recv_inject_err) { zfs_ioc_recv_inject_err = B_FALSE; error = 1; } #endif #ifdef __FreeBSD__ if (error == 0) zvol_create_minors(tofs); #endif /* * On error, restore the original props. */ if (error != 0 && props != NULL && !drc.drc_newfs) { if (clear_received_props(tofs, props, NULL) != 0) { /* * We failed to clear the received properties. * Since we may have left a $recvd value on the * system, we can't clear the $hasrecvd flag. */ zc->zc_obj |= ZPROP_ERR_NORESTORE; } else if (first_recvd_props) { dsl_prop_unset_hasrecvd(tofs); } if (origprops == NULL && !drc.drc_newfs) { /* We failed to stash the original properties. */ zc->zc_obj |= ZPROP_ERR_NORESTORE; } /* * dsl_props_set() will not convert RECEIVED to LOCAL on or * after SPA_VERSION_RECVD_PROPS, so we need to specify LOCAL * explictly if we're restoring local properties cleared in the * first new-style receive. */ if (origprops != NULL && zfs_set_prop_nvlist(tofs, (first_recvd_props ? ZPROP_SRC_LOCAL : ZPROP_SRC_RECEIVED), origprops, NULL) != 0) { /* * We stashed the original properties but failed to * restore them. */ zc->zc_obj |= ZPROP_ERR_NORESTORE; } } out: nvlist_free(props); nvlist_free(origprops); nvlist_free(errors); releasef(fd); if (error == 0) error = props_error; return (error); } /* * inputs: * zc_name name of snapshot to send * zc_cookie file descriptor to send stream to * zc_obj fromorigin flag (mutually exclusive with zc_fromobj) * zc_sendobj objsetid of snapshot to send * zc_fromobj objsetid of incremental fromsnap (may be zero) * zc_guid if set, estimate size of stream only. zc_cookie is ignored. * output size in zc_objset_type. * zc_flags lzc_send_flags * * outputs: * zc_objset_type estimated size, if zc_guid is set */ static int zfs_ioc_send(zfs_cmd_t *zc) { int error; offset_t off; boolean_t estimate = (zc->zc_guid != 0); boolean_t embedok = (zc->zc_flags & 0x1); boolean_t large_block_ok = (zc->zc_flags & 0x2); boolean_t compressok = (zc->zc_flags & 0x4); if (zc->zc_obj != 0) { dsl_pool_t *dp; dsl_dataset_t *tosnap; error = dsl_pool_hold(zc->zc_name, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold_obj(dp, zc->zc_sendobj, FTAG, &tosnap); if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } if (dsl_dir_is_clone(tosnap->ds_dir)) zc->zc_fromobj = dsl_dir_phys(tosnap->ds_dir)->dd_origin_obj; dsl_dataset_rele(tosnap, FTAG); dsl_pool_rele(dp, FTAG); } if (estimate) { dsl_pool_t *dp; dsl_dataset_t *tosnap; dsl_dataset_t *fromsnap = NULL; error = dsl_pool_hold(zc->zc_name, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold_obj(dp, zc->zc_sendobj, FTAG, &tosnap); if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } if (zc->zc_fromobj != 0) { error = dsl_dataset_hold_obj(dp, zc->zc_fromobj, FTAG, &fromsnap); if (error != 0) { dsl_dataset_rele(tosnap, FTAG); dsl_pool_rele(dp, FTAG); return (error); } } error = dmu_send_estimate(tosnap, fromsnap, compressok, &zc->zc_objset_type); if (fromsnap != NULL) dsl_dataset_rele(fromsnap, FTAG); dsl_dataset_rele(tosnap, FTAG); dsl_pool_rele(dp, FTAG); } else { file_t *fp; #ifdef illumos fp = getf(zc->zc_cookie); #else fget_write(curthread, zc->zc_cookie, &cap_write_rights, &fp); #endif if (fp == NULL) return (SET_ERROR(EBADF)); off = fp->f_offset; error = dmu_send_obj(zc->zc_name, zc->zc_sendobj, zc->zc_fromobj, embedok, large_block_ok, compressok, #ifdef illumos zc->zc_cookie, fp->f_vnode, &off); #else zc->zc_cookie, fp, &off); #endif if (off >= 0 && off <= MAXOFFSET_T) fp->f_offset = off; releasef(zc->zc_cookie); } return (error); } /* * inputs: * zc_name name of snapshot on which to report progress * zc_cookie file descriptor of send stream * * outputs: * zc_cookie number of bytes written in send stream thus far */ static int zfs_ioc_send_progress(zfs_cmd_t *zc) { dsl_pool_t *dp; dsl_dataset_t *ds; dmu_sendarg_t *dsp = NULL; int error; error = dsl_pool_hold(zc->zc_name, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold(dp, zc->zc_name, FTAG, &ds); if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } mutex_enter(&ds->ds_sendstream_lock); /* * Iterate over all the send streams currently active on this dataset. * If there's one which matches the specified file descriptor _and_ the * stream was started by the current process, return the progress of * that stream. */ for (dsp = list_head(&ds->ds_sendstreams); dsp != NULL; dsp = list_next(&ds->ds_sendstreams, dsp)) { if (dsp->dsa_outfd == zc->zc_cookie && dsp->dsa_proc == curproc) break; } if (dsp != NULL) zc->zc_cookie = *(dsp->dsa_off); else error = SET_ERROR(ENOENT); mutex_exit(&ds->ds_sendstream_lock); dsl_dataset_rele(ds, FTAG); dsl_pool_rele(dp, FTAG); return (error); } static int zfs_ioc_inject_fault(zfs_cmd_t *zc) { int id, error; error = zio_inject_fault(zc->zc_name, (int)zc->zc_guid, &id, &zc->zc_inject_record); if (error == 0) zc->zc_guid = (uint64_t)id; return (error); } static int zfs_ioc_clear_fault(zfs_cmd_t *zc) { return (zio_clear_fault((int)zc->zc_guid)); } static int zfs_ioc_inject_list_next(zfs_cmd_t *zc) { int id = (int)zc->zc_guid; int error; error = zio_inject_list_next(&id, zc->zc_name, sizeof (zc->zc_name), &zc->zc_inject_record); zc->zc_guid = id; return (error); } static int zfs_ioc_error_log(zfs_cmd_t *zc) { spa_t *spa; int error; size_t count = (size_t)zc->zc_nvlist_dst_size; if ((error = spa_open(zc->zc_name, &spa, FTAG)) != 0) return (error); error = spa_get_errlog(spa, (void *)(uintptr_t)zc->zc_nvlist_dst, &count); if (error == 0) zc->zc_nvlist_dst_size = count; else zc->zc_nvlist_dst_size = spa_get_errlog_size(spa); spa_close(spa, FTAG); return (error); } static int zfs_ioc_clear(zfs_cmd_t *zc) { spa_t *spa; vdev_t *vd; int error; /* * On zpool clear we also fix up missing slogs */ mutex_enter(&spa_namespace_lock); spa = spa_lookup(zc->zc_name); if (spa == NULL) { mutex_exit(&spa_namespace_lock); return (SET_ERROR(EIO)); } if (spa_get_log_state(spa) == SPA_LOG_MISSING) { /* we need to let spa_open/spa_load clear the chains */ spa_set_log_state(spa, SPA_LOG_CLEAR); } spa->spa_last_open_failed = 0; mutex_exit(&spa_namespace_lock); if (zc->zc_cookie & ZPOOL_NO_REWIND) { error = spa_open(zc->zc_name, &spa, FTAG); } else { nvlist_t *policy; nvlist_t *config = NULL; if (zc->zc_nvlist_src == 0) return (SET_ERROR(EINVAL)); if ((error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &policy)) == 0) { error = spa_open_rewind(zc->zc_name, &spa, FTAG, policy, &config); if (config != NULL) { int err; if ((err = put_nvlist(zc, config)) != 0) error = err; nvlist_free(config); } nvlist_free(policy); } } if (error != 0) return (error); spa_vdev_state_enter(spa, SCL_NONE); if (zc->zc_guid == 0) { vd = NULL; } else { vd = spa_lookup_by_guid(spa, zc->zc_guid, B_TRUE); if (vd == NULL) { (void) spa_vdev_state_exit(spa, NULL, ENODEV); spa_close(spa, FTAG); return (SET_ERROR(ENODEV)); } } vdev_clear(spa, vd); (void) spa_vdev_state_exit(spa, NULL, 0); /* * Resume any suspended I/Os. */ if (zio_resume(spa) != 0) error = SET_ERROR(EIO); spa_close(spa, FTAG); return (error); } static int zfs_ioc_pool_reopen(zfs_cmd_t *zc) { spa_t *spa; int error; error = spa_open(zc->zc_name, &spa, FTAG); if (error != 0) return (error); spa_vdev_state_enter(spa, SCL_NONE); /* * If a resilver is already in progress then set the * spa_scrub_reopen flag to B_TRUE so that we don't restart * the scan as a side effect of the reopen. Otherwise, let * vdev_open() decided if a resilver is required. */ spa->spa_scrub_reopen = dsl_scan_resilvering(spa->spa_dsl_pool); vdev_reopen(spa->spa_root_vdev); spa->spa_scrub_reopen = B_FALSE; (void) spa_vdev_state_exit(spa, NULL, 0); spa_close(spa, FTAG); return (0); } /* * inputs: * zc_name name of filesystem * * outputs: * zc_string name of conflicting snapshot, if there is one */ static int zfs_ioc_promote(zfs_cmd_t *zc) { dsl_pool_t *dp; dsl_dataset_t *ds, *ods; char origin[ZFS_MAX_DATASET_NAME_LEN]; char *cp; int error; zc->zc_name[sizeof (zc->zc_name) - 1] = '\0'; if (dataset_namecheck(zc->zc_name, NULL, NULL) != 0 || strchr(zc->zc_name, '%')) return (SET_ERROR(EINVAL)); error = dsl_pool_hold(zc->zc_name, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold(dp, zc->zc_name, FTAG, &ds); if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } if (!dsl_dir_is_clone(ds->ds_dir)) { dsl_dataset_rele(ds, FTAG); dsl_pool_rele(dp, FTAG); return (SET_ERROR(EINVAL)); } error = dsl_dataset_hold_obj(dp, dsl_dir_phys(ds->ds_dir)->dd_origin_obj, FTAG, &ods); if (error != 0) { dsl_dataset_rele(ds, FTAG); dsl_pool_rele(dp, FTAG); return (error); } dsl_dataset_name(ods, origin); dsl_dataset_rele(ods, FTAG); dsl_dataset_rele(ds, FTAG); dsl_pool_rele(dp, FTAG); /* * We don't need to unmount *all* the origin fs's snapshots, but * it's easier. */ cp = strchr(origin, '@'); if (cp) *cp = '\0'; (void) dmu_objset_find(origin, zfs_unmount_snap_cb, NULL, DS_FIND_SNAPSHOTS); return (dsl_dataset_promote(zc->zc_name, zc->zc_string)); } /* * Retrieve a single {user|group}{used|quota}@... property. * * inputs: * zc_name name of filesystem * zc_objset_type zfs_userquota_prop_t * zc_value domain name (eg. "S-1-234-567-89") * zc_guid RID/UID/GID * * outputs: * zc_cookie property value */ static int zfs_ioc_userspace_one(zfs_cmd_t *zc) { zfsvfs_t *zfsvfs; int error; if (zc->zc_objset_type >= ZFS_NUM_USERQUOTA_PROPS) return (SET_ERROR(EINVAL)); error = zfsvfs_hold(zc->zc_name, FTAG, &zfsvfs, B_FALSE); if (error != 0) return (error); error = zfs_userspace_one(zfsvfs, zc->zc_objset_type, zc->zc_value, zc->zc_guid, &zc->zc_cookie); zfsvfs_rele(zfsvfs, FTAG); return (error); } /* * inputs: * zc_name name of filesystem * zc_cookie zap cursor * zc_objset_type zfs_userquota_prop_t * zc_nvlist_dst[_size] buffer to fill (not really an nvlist) * * outputs: * zc_nvlist_dst[_size] data buffer (array of zfs_useracct_t) * zc_cookie zap cursor */ static int zfs_ioc_userspace_many(zfs_cmd_t *zc) { zfsvfs_t *zfsvfs; int bufsize = zc->zc_nvlist_dst_size; if (bufsize <= 0) return (SET_ERROR(ENOMEM)); int error = zfsvfs_hold(zc->zc_name, FTAG, &zfsvfs, B_FALSE); if (error != 0) return (error); void *buf = kmem_alloc(bufsize, KM_SLEEP); error = zfs_userspace_many(zfsvfs, zc->zc_objset_type, &zc->zc_cookie, buf, &zc->zc_nvlist_dst_size); if (error == 0) { error = ddi_copyout(buf, (void *)(uintptr_t)zc->zc_nvlist_dst, zc->zc_nvlist_dst_size, zc->zc_iflags); } kmem_free(buf, bufsize); zfsvfs_rele(zfsvfs, FTAG); return (error); } /* * inputs: * zc_name name of filesystem * * outputs: * none */ static int zfs_ioc_userspace_upgrade(zfs_cmd_t *zc) { objset_t *os; int error = 0; zfsvfs_t *zfsvfs; if (getzfsvfs(zc->zc_name, &zfsvfs) == 0) { if (!dmu_objset_userused_enabled(zfsvfs->z_os)) { /* * If userused is not enabled, it may be because the * objset needs to be closed & reopened (to grow the * objset_phys_t). Suspend/resume the fs will do that. */ dsl_dataset_t *ds, *newds; ds = dmu_objset_ds(zfsvfs->z_os); error = zfs_suspend_fs(zfsvfs); if (error == 0) { dmu_objset_refresh_ownership(ds, &newds, zfsvfs); error = zfs_resume_fs(zfsvfs, newds); } } if (error == 0) error = dmu_objset_userspace_upgrade(zfsvfs->z_os); #ifdef illumos VFS_RELE(zfsvfs->z_vfs); #else vfs_unbusy(zfsvfs->z_vfs); #endif } else { /* XXX kind of reading contents without owning */ error = dmu_objset_hold(zc->zc_name, FTAG, &os); if (error != 0) return (error); error = dmu_objset_userspace_upgrade(os); dmu_objset_rele(os, FTAG); } return (error); } #ifdef illumos /* * We don't want to have a hard dependency * against some special symbols in sharefs * nfs, and smbsrv. Determine them if needed when * the first file system is shared. * Neither sharefs, nfs or smbsrv are unloadable modules. */ int (*znfsexport_fs)(void *arg); int (*zshare_fs)(enum sharefs_sys_op, share_t *, uint32_t); int (*zsmbexport_fs)(void *arg, boolean_t add_share); int zfs_nfsshare_inited; int zfs_smbshare_inited; ddi_modhandle_t nfs_mod; ddi_modhandle_t sharefs_mod; ddi_modhandle_t smbsrv_mod; #endif /* illumos */ kmutex_t zfs_share_lock; #ifdef illumos static int zfs_init_sharefs() { int error; ASSERT(MUTEX_HELD(&zfs_share_lock)); /* Both NFS and SMB shares also require sharetab support. */ if (sharefs_mod == NULL && ((sharefs_mod = ddi_modopen("fs/sharefs", KRTLD_MODE_FIRST, &error)) == NULL)) { return (SET_ERROR(ENOSYS)); } if (zshare_fs == NULL && ((zshare_fs = (int (*)(enum sharefs_sys_op, share_t *, uint32_t)) ddi_modsym(sharefs_mod, "sharefs_impl", &error)) == NULL)) { return (SET_ERROR(ENOSYS)); } return (0); } #endif /* illumos */ static int zfs_ioc_share(zfs_cmd_t *zc) { #ifdef illumos int error; int opcode; switch (zc->zc_share.z_sharetype) { case ZFS_SHARE_NFS: case ZFS_UNSHARE_NFS: if (zfs_nfsshare_inited == 0) { mutex_enter(&zfs_share_lock); if (nfs_mod == NULL && ((nfs_mod = ddi_modopen("fs/nfs", KRTLD_MODE_FIRST, &error)) == NULL)) { mutex_exit(&zfs_share_lock); return (SET_ERROR(ENOSYS)); } if (znfsexport_fs == NULL && ((znfsexport_fs = (int (*)(void *)) ddi_modsym(nfs_mod, "nfs_export", &error)) == NULL)) { mutex_exit(&zfs_share_lock); return (SET_ERROR(ENOSYS)); } error = zfs_init_sharefs(); if (error != 0) { mutex_exit(&zfs_share_lock); return (SET_ERROR(ENOSYS)); } zfs_nfsshare_inited = 1; mutex_exit(&zfs_share_lock); } break; case ZFS_SHARE_SMB: case ZFS_UNSHARE_SMB: if (zfs_smbshare_inited == 0) { mutex_enter(&zfs_share_lock); if (smbsrv_mod == NULL && ((smbsrv_mod = ddi_modopen("drv/smbsrv", KRTLD_MODE_FIRST, &error)) == NULL)) { mutex_exit(&zfs_share_lock); return (SET_ERROR(ENOSYS)); } if (zsmbexport_fs == NULL && ((zsmbexport_fs = (int (*)(void *, boolean_t))ddi_modsym(smbsrv_mod, "smb_server_share", &error)) == NULL)) { mutex_exit(&zfs_share_lock); return (SET_ERROR(ENOSYS)); } error = zfs_init_sharefs(); if (error != 0) { mutex_exit(&zfs_share_lock); return (SET_ERROR(ENOSYS)); } zfs_smbshare_inited = 1; mutex_exit(&zfs_share_lock); } break; default: return (SET_ERROR(EINVAL)); } switch (zc->zc_share.z_sharetype) { case ZFS_SHARE_NFS: case ZFS_UNSHARE_NFS: if (error = znfsexport_fs((void *) (uintptr_t)zc->zc_share.z_exportdata)) return (error); break; case ZFS_SHARE_SMB: case ZFS_UNSHARE_SMB: if (error = zsmbexport_fs((void *) (uintptr_t)zc->zc_share.z_exportdata, zc->zc_share.z_sharetype == ZFS_SHARE_SMB ? B_TRUE: B_FALSE)) { return (error); } break; } opcode = (zc->zc_share.z_sharetype == ZFS_SHARE_NFS || zc->zc_share.z_sharetype == ZFS_SHARE_SMB) ? SHAREFS_ADD : SHAREFS_REMOVE; /* * Add or remove share from sharetab */ error = zshare_fs(opcode, (void *)(uintptr_t)zc->zc_share.z_sharedata, zc->zc_share.z_sharemax); return (error); #else /* !illumos */ return (ENOSYS); #endif /* illumos */ } ace_t full_access[] = { {(uid_t)-1, ACE_ALL_PERMS, ACE_EVERYONE, 0} }; /* * inputs: * zc_name name of containing filesystem * zc_obj object # beyond which we want next in-use object # * * outputs: * zc_obj next in-use object # */ static int zfs_ioc_next_obj(zfs_cmd_t *zc) { objset_t *os = NULL; int error; error = dmu_objset_hold(zc->zc_name, FTAG, &os); if (error != 0) return (error); error = dmu_object_next(os, &zc->zc_obj, B_FALSE, dsl_dataset_phys(os->os_dsl_dataset)->ds_prev_snap_txg); dmu_objset_rele(os, FTAG); return (error); } /* * inputs: * zc_name name of filesystem * zc_value prefix name for snapshot * zc_cleanup_fd cleanup-on-exit file descriptor for calling process * * outputs: * zc_value short name of new snapshot */ static int zfs_ioc_tmp_snapshot(zfs_cmd_t *zc) { char *snap_name; char *hold_name; int error; minor_t minor; error = zfs_onexit_fd_hold(zc->zc_cleanup_fd, &minor); if (error != 0) return (error); snap_name = kmem_asprintf("%s-%016llx", zc->zc_value, (u_longlong_t)ddi_get_lbolt64()); hold_name = kmem_asprintf("%%%s", zc->zc_value); error = dsl_dataset_snapshot_tmp(zc->zc_name, snap_name, minor, hold_name); if (error == 0) (void) strcpy(zc->zc_value, snap_name); strfree(snap_name); strfree(hold_name); zfs_onexit_fd_rele(zc->zc_cleanup_fd); return (error); } /* * inputs: * zc_name name of "to" snapshot * zc_value name of "from" snapshot * zc_cookie file descriptor to write diff data on * * outputs: * dmu_diff_record_t's to the file descriptor */ static int zfs_ioc_diff(zfs_cmd_t *zc) { file_t *fp; offset_t off; int error; #ifdef illumos fp = getf(zc->zc_cookie); #else fget_write(curthread, zc->zc_cookie, &cap_write_rights, &fp); #endif if (fp == NULL) return (SET_ERROR(EBADF)); off = fp->f_offset; #ifdef illumos error = dmu_diff(zc->zc_name, zc->zc_value, fp->f_vnode, &off); #else error = dmu_diff(zc->zc_name, zc->zc_value, fp, &off); #endif if (off >= 0 && off <= MAXOFFSET_T) fp->f_offset = off; releasef(zc->zc_cookie); return (error); } #ifdef illumos /* * Remove all ACL files in shares dir */ static int zfs_smb_acl_purge(znode_t *dzp) { zap_cursor_t zc; zap_attribute_t zap; zfsvfs_t *zfsvfs = dzp->z_zfsvfs; int error; for (zap_cursor_init(&zc, zfsvfs->z_os, dzp->z_id); (error = zap_cursor_retrieve(&zc, &zap)) == 0; zap_cursor_advance(&zc)) { if ((error = VOP_REMOVE(ZTOV(dzp), zap.za_name, kcred, NULL, 0)) != 0) break; } zap_cursor_fini(&zc); return (error); } #endif /* illumos */ static int zfs_ioc_smb_acl(zfs_cmd_t *zc) { #ifdef illumos vnode_t *vp; znode_t *dzp; vnode_t *resourcevp = NULL; znode_t *sharedir; zfsvfs_t *zfsvfs; nvlist_t *nvlist; char *src, *target; vattr_t vattr; vsecattr_t vsec; int error = 0; if ((error = lookupname(zc->zc_value, UIO_SYSSPACE, NO_FOLLOW, NULL, &vp)) != 0) return (error); /* Now make sure mntpnt and dataset are ZFS */ if (strcmp(vp->v_vfsp->mnt_stat.f_fstypename, "zfs") != 0 || (strcmp((char *)refstr_value(vp->v_vfsp->vfs_resource), zc->zc_name) != 0)) { VN_RELE(vp); return (SET_ERROR(EINVAL)); } dzp = VTOZ(vp); zfsvfs = dzp->z_zfsvfs; ZFS_ENTER(zfsvfs); /* * Create share dir if its missing. */ mutex_enter(&zfsvfs->z_lock); if (zfsvfs->z_shares_dir == 0) { dmu_tx_t *tx; tx = dmu_tx_create(zfsvfs->z_os); dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, TRUE, ZFS_SHARES_DIR); dmu_tx_hold_zap(tx, DMU_NEW_OBJECT, FALSE, NULL); error = dmu_tx_assign(tx, TXG_WAIT); if (error != 0) { dmu_tx_abort(tx); } else { error = zfs_create_share_dir(zfsvfs, tx); dmu_tx_commit(tx); } if (error != 0) { mutex_exit(&zfsvfs->z_lock); VN_RELE(vp); ZFS_EXIT(zfsvfs); return (error); } } mutex_exit(&zfsvfs->z_lock); ASSERT(zfsvfs->z_shares_dir); if ((error = zfs_zget(zfsvfs, zfsvfs->z_shares_dir, &sharedir)) != 0) { VN_RELE(vp); ZFS_EXIT(zfsvfs); return (error); } switch (zc->zc_cookie) { case ZFS_SMB_ACL_ADD: vattr.va_mask = AT_MODE|AT_UID|AT_GID|AT_TYPE; vattr.va_type = VREG; vattr.va_mode = S_IFREG|0777; vattr.va_uid = 0; vattr.va_gid = 0; vsec.vsa_mask = VSA_ACE; vsec.vsa_aclentp = &full_access; vsec.vsa_aclentsz = sizeof (full_access); vsec.vsa_aclcnt = 1; error = VOP_CREATE(ZTOV(sharedir), zc->zc_string, &vattr, EXCL, 0, &resourcevp, kcred, 0, NULL, &vsec); if (resourcevp) VN_RELE(resourcevp); break; case ZFS_SMB_ACL_REMOVE: error = VOP_REMOVE(ZTOV(sharedir), zc->zc_string, kcred, NULL, 0); break; case ZFS_SMB_ACL_RENAME: if ((error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &nvlist)) != 0) { VN_RELE(vp); VN_RELE(ZTOV(sharedir)); ZFS_EXIT(zfsvfs); return (error); } if (nvlist_lookup_string(nvlist, ZFS_SMB_ACL_SRC, &src) || nvlist_lookup_string(nvlist, ZFS_SMB_ACL_TARGET, &target)) { VN_RELE(vp); VN_RELE(ZTOV(sharedir)); ZFS_EXIT(zfsvfs); nvlist_free(nvlist); return (error); } error = VOP_RENAME(ZTOV(sharedir), src, ZTOV(sharedir), target, kcred, NULL, 0); nvlist_free(nvlist); break; case ZFS_SMB_ACL_PURGE: error = zfs_smb_acl_purge(sharedir); break; default: error = SET_ERROR(EINVAL); break; } VN_RELE(vp); VN_RELE(ZTOV(sharedir)); ZFS_EXIT(zfsvfs); return (error); #else /* !illumos */ return (EOPNOTSUPP); #endif /* illumos */ } /* * innvl: { * "holds" -> { snapname -> holdname (string), ... } * (optional) "cleanup_fd" -> fd (int32) * } * * outnvl: { * snapname -> error value (int32) * ... * } */ /* ARGSUSED */ static int zfs_ioc_hold(const char *pool, nvlist_t *args, nvlist_t *errlist) { nvpair_t *pair; nvlist_t *holds; int cleanup_fd = -1; int error; minor_t minor = 0; error = nvlist_lookup_nvlist(args, "holds", &holds); if (error != 0) return (SET_ERROR(EINVAL)); /* make sure the user didn't pass us any invalid (empty) tags */ for (pair = nvlist_next_nvpair(holds, NULL); pair != NULL; pair = nvlist_next_nvpair(holds, pair)) { char *htag; error = nvpair_value_string(pair, &htag); if (error != 0) return (SET_ERROR(error)); if (strlen(htag) == 0) return (SET_ERROR(EINVAL)); } if (nvlist_lookup_int32(args, "cleanup_fd", &cleanup_fd) == 0) { error = zfs_onexit_fd_hold(cleanup_fd, &minor); if (error != 0) return (error); } error = dsl_dataset_user_hold(holds, minor, errlist); if (minor != 0) zfs_onexit_fd_rele(cleanup_fd); return (error); } /* * innvl is not used. * * outnvl: { * holdname -> time added (uint64 seconds since epoch) * ... * } */ /* ARGSUSED */ static int zfs_ioc_get_holds(const char *snapname, nvlist_t *args, nvlist_t *outnvl) { return (dsl_dataset_get_holds(snapname, outnvl)); } /* * innvl: { * snapname -> { holdname, ... } * ... * } * * outnvl: { * snapname -> error value (int32) * ... * } */ /* ARGSUSED */ static int zfs_ioc_release(const char *pool, nvlist_t *holds, nvlist_t *errlist) { return (dsl_dataset_user_release(holds, errlist)); } /* * inputs: * zc_name name of new filesystem or snapshot * zc_value full name of old snapshot * * outputs: * zc_cookie space in bytes * zc_objset_type compressed space in bytes * zc_perm_action uncompressed space in bytes */ static int zfs_ioc_space_written(zfs_cmd_t *zc) { int error; dsl_pool_t *dp; dsl_dataset_t *new, *old; error = dsl_pool_hold(zc->zc_name, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold(dp, zc->zc_name, FTAG, &new); if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } error = dsl_dataset_hold(dp, zc->zc_value, FTAG, &old); if (error != 0) { dsl_dataset_rele(new, FTAG); dsl_pool_rele(dp, FTAG); return (error); } error = dsl_dataset_space_written(old, new, &zc->zc_cookie, &zc->zc_objset_type, &zc->zc_perm_action); dsl_dataset_rele(old, FTAG); dsl_dataset_rele(new, FTAG); dsl_pool_rele(dp, FTAG); return (error); } /* * innvl: { * "firstsnap" -> snapshot name * } * * outnvl: { * "used" -> space in bytes * "compressed" -> compressed space in bytes * "uncompressed" -> uncompressed space in bytes * } */ static int zfs_ioc_space_snaps(const char *lastsnap, nvlist_t *innvl, nvlist_t *outnvl) { int error; dsl_pool_t *dp; dsl_dataset_t *new, *old; char *firstsnap; uint64_t used, comp, uncomp; if (nvlist_lookup_string(innvl, "firstsnap", &firstsnap) != 0) return (SET_ERROR(EINVAL)); error = dsl_pool_hold(lastsnap, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold(dp, lastsnap, FTAG, &new); if (error == 0 && !new->ds_is_snapshot) { dsl_dataset_rele(new, FTAG); error = SET_ERROR(EINVAL); } if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } error = dsl_dataset_hold(dp, firstsnap, FTAG, &old); if (error == 0 && !old->ds_is_snapshot) { dsl_dataset_rele(old, FTAG); error = SET_ERROR(EINVAL); } if (error != 0) { dsl_dataset_rele(new, FTAG); dsl_pool_rele(dp, FTAG); return (error); } error = dsl_dataset_space_wouldfree(old, new, &used, &comp, &uncomp); dsl_dataset_rele(old, FTAG); dsl_dataset_rele(new, FTAG); dsl_pool_rele(dp, FTAG); fnvlist_add_uint64(outnvl, "used", used); fnvlist_add_uint64(outnvl, "compressed", comp); fnvlist_add_uint64(outnvl, "uncompressed", uncomp); return (error); } static int zfs_ioc_jail(zfs_cmd_t *zc) { return (zone_dataset_attach(curthread->td_ucred, zc->zc_name, (int)zc->zc_jailid)); } static int zfs_ioc_unjail(zfs_cmd_t *zc) { return (zone_dataset_detach(curthread->td_ucred, zc->zc_name, (int)zc->zc_jailid)); } /* * innvl: { * "fd" -> file descriptor to write stream to (int32) * (optional) "fromsnap" -> full snap name to send an incremental from * (optional) "largeblockok" -> (value ignored) * indicates that blocks > 128KB are permitted * (optional) "embedok" -> (value ignored) * presence indicates DRR_WRITE_EMBEDDED records are permitted * (optional) "compressok" -> (value ignored) * presence indicates compressed DRR_WRITE records are permitted * (optional) "resume_object" and "resume_offset" -> (uint64) * if present, resume send stream from specified object and offset. * } * * outnvl is unused */ /* ARGSUSED */ static int zfs_ioc_send_new(const char *snapname, nvlist_t *innvl, nvlist_t *outnvl) { file_t *fp; int error; offset_t off; char *fromname = NULL; int fd; boolean_t largeblockok; boolean_t embedok; boolean_t compressok; uint64_t resumeobj = 0; uint64_t resumeoff = 0; error = nvlist_lookup_int32(innvl, "fd", &fd); if (error != 0) return (SET_ERROR(EINVAL)); (void) nvlist_lookup_string(innvl, "fromsnap", &fromname); largeblockok = nvlist_exists(innvl, "largeblockok"); embedok = nvlist_exists(innvl, "embedok"); compressok = nvlist_exists(innvl, "compressok"); (void) nvlist_lookup_uint64(innvl, "resume_object", &resumeobj); (void) nvlist_lookup_uint64(innvl, "resume_offset", &resumeoff); #ifdef illumos file_t *fp = getf(fd); #else fget_write(curthread, fd, &cap_write_rights, &fp); #endif if (fp == NULL) return (SET_ERROR(EBADF)); off = fp->f_offset; error = dmu_send(snapname, fromname, embedok, largeblockok, compressok, #ifdef illumos fd, resumeobj, resumeoff, fp->f_vnode, &off); #else fd, resumeobj, resumeoff, fp, &off); #endif #ifdef illumos if (VOP_SEEK(fp->f_vnode, fp->f_offset, &off, NULL) == 0) fp->f_offset = off; #else fp->f_offset = off; #endif releasef(fd); return (error); } /* * Determine approximately how large a zfs send stream will be -- the number * of bytes that will be written to the fd supplied to zfs_ioc_send_new(). * * innvl: { * (optional) "from" -> full snap or bookmark name to send an incremental * from * (optional) "largeblockok" -> (value ignored) * indicates that blocks > 128KB are permitted * (optional) "embedok" -> (value ignored) * presence indicates DRR_WRITE_EMBEDDED records are permitted * (optional) "compressok" -> (value ignored) * presence indicates compressed DRR_WRITE records are permitted * } * * outnvl: { * "space" -> bytes of space (uint64) * } */ static int zfs_ioc_send_space(const char *snapname, nvlist_t *innvl, nvlist_t *outnvl) { dsl_pool_t *dp; dsl_dataset_t *tosnap; int error; char *fromname; boolean_t compressok; uint64_t space; error = dsl_pool_hold(snapname, FTAG, &dp); if (error != 0) return (error); error = dsl_dataset_hold(dp, snapname, FTAG, &tosnap); if (error != 0) { dsl_pool_rele(dp, FTAG); return (error); } compressok = nvlist_exists(innvl, "compressok"); error = nvlist_lookup_string(innvl, "from", &fromname); if (error == 0) { if (strchr(fromname, '@') != NULL) { /* * If from is a snapshot, hold it and use the more * efficient dmu_send_estimate to estimate send space * size using deadlists. */ dsl_dataset_t *fromsnap; error = dsl_dataset_hold(dp, fromname, FTAG, &fromsnap); if (error != 0) goto out; error = dmu_send_estimate(tosnap, fromsnap, compressok, &space); dsl_dataset_rele(fromsnap, FTAG); } else if (strchr(fromname, '#') != NULL) { /* * If from is a bookmark, fetch the creation TXG of the * snapshot it was created from and use that to find * blocks that were born after it. */ zfs_bookmark_phys_t frombm; error = dsl_bookmark_lookup(dp, fromname, tosnap, &frombm); if (error != 0) goto out; error = dmu_send_estimate_from_txg(tosnap, frombm.zbm_creation_txg, compressok, &space); } else { /* * from is not properly formatted as a snapshot or * bookmark */ error = SET_ERROR(EINVAL); goto out; } } else { /* * If estimating the size of a full send, use dmu_send_estimate. */ error = dmu_send_estimate(tosnap, NULL, compressok, &space); } fnvlist_add_uint64(outnvl, "space", space); out: dsl_dataset_rele(tosnap, FTAG); dsl_pool_rele(dp, FTAG); return (error); } static zfs_ioc_vec_t zfs_ioc_vec[ZFS_IOC_LAST - ZFS_IOC_FIRST]; static void zfs_ioctl_register_legacy(zfs_ioc_t ioc, zfs_ioc_legacy_func_t *func, zfs_secpolicy_func_t *secpolicy, zfs_ioc_namecheck_t namecheck, boolean_t log_history, zfs_ioc_poolcheck_t pool_check) { zfs_ioc_vec_t *vec = &zfs_ioc_vec[ioc - ZFS_IOC_FIRST]; ASSERT3U(ioc, >=, ZFS_IOC_FIRST); ASSERT3U(ioc, <, ZFS_IOC_LAST); ASSERT3P(vec->zvec_legacy_func, ==, NULL); ASSERT3P(vec->zvec_func, ==, NULL); vec->zvec_legacy_func = func; vec->zvec_secpolicy = secpolicy; vec->zvec_namecheck = namecheck; vec->zvec_allow_log = log_history; vec->zvec_pool_check = pool_check; } /* * See the block comment at the beginning of this file for details on * each argument to this function. */ static void zfs_ioctl_register(const char *name, zfs_ioc_t ioc, zfs_ioc_func_t *func, zfs_secpolicy_func_t *secpolicy, zfs_ioc_namecheck_t namecheck, zfs_ioc_poolcheck_t pool_check, boolean_t smush_outnvlist, boolean_t allow_log) { zfs_ioc_vec_t *vec = &zfs_ioc_vec[ioc - ZFS_IOC_FIRST]; ASSERT3U(ioc, >=, ZFS_IOC_FIRST); ASSERT3U(ioc, <, ZFS_IOC_LAST); ASSERT3P(vec->zvec_legacy_func, ==, NULL); ASSERT3P(vec->zvec_func, ==, NULL); /* if we are logging, the name must be valid */ ASSERT(!allow_log || namecheck != NO_NAME); vec->zvec_name = name; vec->zvec_func = func; vec->zvec_secpolicy = secpolicy; vec->zvec_namecheck = namecheck; vec->zvec_pool_check = pool_check; vec->zvec_smush_outnvlist = smush_outnvlist; vec->zvec_allow_log = allow_log; } static void zfs_ioctl_register_pool(zfs_ioc_t ioc, zfs_ioc_legacy_func_t *func, zfs_secpolicy_func_t *secpolicy, boolean_t log_history, zfs_ioc_poolcheck_t pool_check) { zfs_ioctl_register_legacy(ioc, func, secpolicy, POOL_NAME, log_history, pool_check); } static void zfs_ioctl_register_dataset_nolog(zfs_ioc_t ioc, zfs_ioc_legacy_func_t *func, zfs_secpolicy_func_t *secpolicy, zfs_ioc_poolcheck_t pool_check) { zfs_ioctl_register_legacy(ioc, func, secpolicy, DATASET_NAME, B_FALSE, pool_check); } static void zfs_ioctl_register_pool_modify(zfs_ioc_t ioc, zfs_ioc_legacy_func_t *func) { zfs_ioctl_register_legacy(ioc, func, zfs_secpolicy_config, POOL_NAME, B_TRUE, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY); } static void zfs_ioctl_register_pool_meta(zfs_ioc_t ioc, zfs_ioc_legacy_func_t *func, zfs_secpolicy_func_t *secpolicy) { zfs_ioctl_register_legacy(ioc, func, secpolicy, NO_NAME, B_FALSE, POOL_CHECK_NONE); } static void zfs_ioctl_register_dataset_read_secpolicy(zfs_ioc_t ioc, zfs_ioc_legacy_func_t *func, zfs_secpolicy_func_t *secpolicy) { zfs_ioctl_register_legacy(ioc, func, secpolicy, DATASET_NAME, B_FALSE, POOL_CHECK_SUSPENDED); } static void zfs_ioctl_register_dataset_read(zfs_ioc_t ioc, zfs_ioc_legacy_func_t *func) { zfs_ioctl_register_dataset_read_secpolicy(ioc, func, zfs_secpolicy_read); } static void zfs_ioctl_register_dataset_modify(zfs_ioc_t ioc, zfs_ioc_legacy_func_t *func, zfs_secpolicy_func_t *secpolicy) { zfs_ioctl_register_legacy(ioc, func, secpolicy, DATASET_NAME, B_TRUE, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY); } static void zfs_ioctl_init(void) { zfs_ioctl_register("snapshot", ZFS_IOC_SNAPSHOT, zfs_ioc_snapshot, zfs_secpolicy_snapshot, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("log_history", ZFS_IOC_LOG_HISTORY, zfs_ioc_log_history, zfs_secpolicy_log_history, NO_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_FALSE, B_FALSE); zfs_ioctl_register("space_snaps", ZFS_IOC_SPACE_SNAPS, zfs_ioc_space_snaps, zfs_secpolicy_read, DATASET_NAME, POOL_CHECK_SUSPENDED, B_FALSE, B_FALSE); zfs_ioctl_register("send", ZFS_IOC_SEND_NEW, zfs_ioc_send_new, zfs_secpolicy_send_new, DATASET_NAME, POOL_CHECK_SUSPENDED, B_FALSE, B_FALSE); zfs_ioctl_register("send_space", ZFS_IOC_SEND_SPACE, zfs_ioc_send_space, zfs_secpolicy_read, DATASET_NAME, POOL_CHECK_SUSPENDED, B_FALSE, B_FALSE); zfs_ioctl_register("create", ZFS_IOC_CREATE, zfs_ioc_create, zfs_secpolicy_create_clone, DATASET_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("clone", ZFS_IOC_CLONE, zfs_ioc_clone, zfs_secpolicy_create_clone, DATASET_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("remap", ZFS_IOC_REMAP, zfs_ioc_remap, zfs_secpolicy_remap, DATASET_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_FALSE, B_TRUE); zfs_ioctl_register("destroy_snaps", ZFS_IOC_DESTROY_SNAPS, zfs_ioc_destroy_snaps, zfs_secpolicy_destroy_snaps, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("hold", ZFS_IOC_HOLD, zfs_ioc_hold, zfs_secpolicy_hold, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("release", ZFS_IOC_RELEASE, zfs_ioc_release, zfs_secpolicy_release, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("get_holds", ZFS_IOC_GET_HOLDS, zfs_ioc_get_holds, zfs_secpolicy_read, DATASET_NAME, POOL_CHECK_SUSPENDED, B_FALSE, B_FALSE); zfs_ioctl_register("rollback", ZFS_IOC_ROLLBACK, zfs_ioc_rollback, zfs_secpolicy_rollback, DATASET_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_FALSE, B_TRUE); zfs_ioctl_register("bookmark", ZFS_IOC_BOOKMARK, zfs_ioc_bookmark, zfs_secpolicy_bookmark, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("get_bookmarks", ZFS_IOC_GET_BOOKMARKS, zfs_ioc_get_bookmarks, zfs_secpolicy_read, DATASET_NAME, POOL_CHECK_SUSPENDED, B_FALSE, B_FALSE); zfs_ioctl_register("destroy_bookmarks", ZFS_IOC_DESTROY_BOOKMARKS, zfs_ioc_destroy_bookmarks, zfs_secpolicy_destroy_bookmarks, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("channel_program", ZFS_IOC_CHANNEL_PROGRAM, zfs_ioc_channel_program, zfs_secpolicy_config, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("zpool_checkpoint", ZFS_IOC_POOL_CHECKPOINT, zfs_ioc_pool_checkpoint, zfs_secpolicy_config, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("zpool_discard_checkpoint", ZFS_IOC_POOL_DISCARD_CHECKPOINT, zfs_ioc_pool_discard_checkpoint, zfs_secpolicy_config, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); zfs_ioctl_register("initialize", ZFS_IOC_POOL_INITIALIZE, zfs_ioc_pool_initialize, zfs_secpolicy_config, POOL_NAME, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE); /* IOCTLS that use the legacy function signature */ zfs_ioctl_register_legacy(ZFS_IOC_POOL_FREEZE, zfs_ioc_pool_freeze, zfs_secpolicy_config, NO_NAME, B_FALSE, POOL_CHECK_READONLY); zfs_ioctl_register_pool(ZFS_IOC_POOL_CREATE, zfs_ioc_pool_create, zfs_secpolicy_config, B_TRUE, POOL_CHECK_NONE); zfs_ioctl_register_pool_modify(ZFS_IOC_POOL_SCAN, zfs_ioc_pool_scan); zfs_ioctl_register_pool_modify(ZFS_IOC_POOL_UPGRADE, zfs_ioc_pool_upgrade); zfs_ioctl_register_pool_modify(ZFS_IOC_VDEV_ADD, zfs_ioc_vdev_add); zfs_ioctl_register_pool_modify(ZFS_IOC_VDEV_REMOVE, zfs_ioc_vdev_remove); zfs_ioctl_register_pool_modify(ZFS_IOC_VDEV_SET_STATE, zfs_ioc_vdev_set_state); zfs_ioctl_register_pool_modify(ZFS_IOC_VDEV_ATTACH, zfs_ioc_vdev_attach); zfs_ioctl_register_pool_modify(ZFS_IOC_VDEV_DETACH, zfs_ioc_vdev_detach); zfs_ioctl_register_pool_modify(ZFS_IOC_VDEV_SETPATH, zfs_ioc_vdev_setpath); zfs_ioctl_register_pool_modify(ZFS_IOC_VDEV_SETFRU, zfs_ioc_vdev_setfru); zfs_ioctl_register_pool_modify(ZFS_IOC_POOL_SET_PROPS, zfs_ioc_pool_set_props); zfs_ioctl_register_pool_modify(ZFS_IOC_VDEV_SPLIT, zfs_ioc_vdev_split); zfs_ioctl_register_pool_modify(ZFS_IOC_POOL_REGUID, zfs_ioc_pool_reguid); zfs_ioctl_register_pool_meta(ZFS_IOC_POOL_CONFIGS, zfs_ioc_pool_configs, zfs_secpolicy_none); zfs_ioctl_register_pool_meta(ZFS_IOC_POOL_TRYIMPORT, zfs_ioc_pool_tryimport, zfs_secpolicy_config); zfs_ioctl_register_pool_meta(ZFS_IOC_INJECT_FAULT, zfs_ioc_inject_fault, zfs_secpolicy_inject); zfs_ioctl_register_pool_meta(ZFS_IOC_CLEAR_FAULT, zfs_ioc_clear_fault, zfs_secpolicy_inject); zfs_ioctl_register_pool_meta(ZFS_IOC_INJECT_LIST_NEXT, zfs_ioc_inject_list_next, zfs_secpolicy_inject); /* * pool destroy, and export don't log the history as part of * zfsdev_ioctl, but rather zfs_ioc_pool_export * does the logging of those commands. */ zfs_ioctl_register_pool(ZFS_IOC_POOL_DESTROY, zfs_ioc_pool_destroy, zfs_secpolicy_config, B_FALSE, POOL_CHECK_NONE); zfs_ioctl_register_pool(ZFS_IOC_POOL_EXPORT, zfs_ioc_pool_export, zfs_secpolicy_config, B_FALSE, POOL_CHECK_NONE); zfs_ioctl_register_pool(ZFS_IOC_POOL_STATS, zfs_ioc_pool_stats, zfs_secpolicy_read, B_FALSE, POOL_CHECK_NONE); zfs_ioctl_register_pool(ZFS_IOC_POOL_GET_PROPS, zfs_ioc_pool_get_props, zfs_secpolicy_read, B_FALSE, POOL_CHECK_NONE); zfs_ioctl_register_pool(ZFS_IOC_ERROR_LOG, zfs_ioc_error_log, zfs_secpolicy_inject, B_FALSE, POOL_CHECK_NONE); zfs_ioctl_register_pool(ZFS_IOC_DSOBJ_TO_DSNAME, zfs_ioc_dsobj_to_dsname, zfs_secpolicy_diff, B_FALSE, POOL_CHECK_NONE); zfs_ioctl_register_pool(ZFS_IOC_POOL_GET_HISTORY, zfs_ioc_pool_get_history, zfs_secpolicy_config, B_FALSE, POOL_CHECK_SUSPENDED); zfs_ioctl_register_pool(ZFS_IOC_POOL_IMPORT, zfs_ioc_pool_import, zfs_secpolicy_config, B_TRUE, POOL_CHECK_NONE); zfs_ioctl_register_pool(ZFS_IOC_CLEAR, zfs_ioc_clear, zfs_secpolicy_config, B_TRUE, POOL_CHECK_READONLY); zfs_ioctl_register_pool(ZFS_IOC_POOL_REOPEN, zfs_ioc_pool_reopen, zfs_secpolicy_config, B_TRUE, POOL_CHECK_SUSPENDED); zfs_ioctl_register_dataset_read(ZFS_IOC_SPACE_WRITTEN, zfs_ioc_space_written); zfs_ioctl_register_dataset_read(ZFS_IOC_OBJSET_RECVD_PROPS, zfs_ioc_objset_recvd_props); zfs_ioctl_register_dataset_read(ZFS_IOC_NEXT_OBJ, zfs_ioc_next_obj); zfs_ioctl_register_dataset_read(ZFS_IOC_GET_FSACL, zfs_ioc_get_fsacl); zfs_ioctl_register_dataset_read(ZFS_IOC_OBJSET_STATS, zfs_ioc_objset_stats); zfs_ioctl_register_dataset_read(ZFS_IOC_OBJSET_ZPLPROPS, zfs_ioc_objset_zplprops); zfs_ioctl_register_dataset_read(ZFS_IOC_DATASET_LIST_NEXT, zfs_ioc_dataset_list_next); zfs_ioctl_register_dataset_read(ZFS_IOC_SNAPSHOT_LIST_NEXT, zfs_ioc_snapshot_list_next); zfs_ioctl_register_dataset_read(ZFS_IOC_SEND_PROGRESS, zfs_ioc_send_progress); zfs_ioctl_register_dataset_read_secpolicy(ZFS_IOC_DIFF, zfs_ioc_diff, zfs_secpolicy_diff); zfs_ioctl_register_dataset_read_secpolicy(ZFS_IOC_OBJ_TO_STATS, zfs_ioc_obj_to_stats, zfs_secpolicy_diff); zfs_ioctl_register_dataset_read_secpolicy(ZFS_IOC_OBJ_TO_PATH, zfs_ioc_obj_to_path, zfs_secpolicy_diff); zfs_ioctl_register_dataset_read_secpolicy(ZFS_IOC_USERSPACE_ONE, zfs_ioc_userspace_one, zfs_secpolicy_userspace_one); zfs_ioctl_register_dataset_read_secpolicy(ZFS_IOC_USERSPACE_MANY, zfs_ioc_userspace_many, zfs_secpolicy_userspace_many); zfs_ioctl_register_dataset_read_secpolicy(ZFS_IOC_SEND, zfs_ioc_send, zfs_secpolicy_send); zfs_ioctl_register_dataset_modify(ZFS_IOC_SET_PROP, zfs_ioc_set_prop, zfs_secpolicy_none); zfs_ioctl_register_dataset_modify(ZFS_IOC_DESTROY, zfs_ioc_destroy, zfs_secpolicy_destroy); zfs_ioctl_register_dataset_modify(ZFS_IOC_RENAME, zfs_ioc_rename, zfs_secpolicy_rename); zfs_ioctl_register_dataset_modify(ZFS_IOC_RECV, zfs_ioc_recv, zfs_secpolicy_recv); zfs_ioctl_register_dataset_modify(ZFS_IOC_PROMOTE, zfs_ioc_promote, zfs_secpolicy_promote); zfs_ioctl_register_dataset_modify(ZFS_IOC_INHERIT_PROP, zfs_ioc_inherit_prop, zfs_secpolicy_inherit_prop); zfs_ioctl_register_dataset_modify(ZFS_IOC_SET_FSACL, zfs_ioc_set_fsacl, zfs_secpolicy_set_fsacl); zfs_ioctl_register_dataset_nolog(ZFS_IOC_SHARE, zfs_ioc_share, zfs_secpolicy_share, POOL_CHECK_NONE); zfs_ioctl_register_dataset_nolog(ZFS_IOC_SMB_ACL, zfs_ioc_smb_acl, zfs_secpolicy_smb_acl, POOL_CHECK_NONE); zfs_ioctl_register_dataset_nolog(ZFS_IOC_USERSPACE_UPGRADE, zfs_ioc_userspace_upgrade, zfs_secpolicy_userspace_upgrade, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY); zfs_ioctl_register_dataset_nolog(ZFS_IOC_TMP_SNAPSHOT, zfs_ioc_tmp_snapshot, zfs_secpolicy_tmp_snapshot, POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY); #ifdef __FreeBSD__ zfs_ioctl_register_dataset_nolog(ZFS_IOC_JAIL, zfs_ioc_jail, zfs_secpolicy_config, POOL_CHECK_NONE); zfs_ioctl_register_dataset_nolog(ZFS_IOC_UNJAIL, zfs_ioc_unjail, zfs_secpolicy_config, POOL_CHECK_NONE); zfs_ioctl_register("fbsd_nextboot", ZFS_IOC_NEXTBOOT, zfs_ioc_nextboot, zfs_secpolicy_config, NO_NAME, POOL_CHECK_NONE, B_FALSE, B_FALSE); #endif } int pool_status_check(const char *name, zfs_ioc_namecheck_t type, zfs_ioc_poolcheck_t check) { spa_t *spa; int error; ASSERT(type == POOL_NAME || type == DATASET_NAME); if (check & POOL_CHECK_NONE) return (0); error = spa_open(name, &spa, FTAG); if (error == 0) { if ((check & POOL_CHECK_SUSPENDED) && spa_suspended(spa)) error = SET_ERROR(EAGAIN); else if ((check & POOL_CHECK_READONLY) && !spa_writeable(spa)) error = SET_ERROR(EROFS); spa_close(spa, FTAG); } return (error); } /* * Find a free minor number. */ minor_t zfsdev_minor_alloc(void) { static minor_t last_minor; minor_t m; ASSERT(MUTEX_HELD(&spa_namespace_lock)); for (m = last_minor + 1; m != last_minor; m++) { if (m > ZFSDEV_MAX_MINOR) m = 1; if (ddi_get_soft_state(zfsdev_state, m) == NULL) { last_minor = m; return (m); } } return (0); } static int zfs_ctldev_init(struct cdev *devp) { minor_t minor; zfs_soft_state_t *zs; ASSERT(MUTEX_HELD(&spa_namespace_lock)); minor = zfsdev_minor_alloc(); if (minor == 0) return (SET_ERROR(ENXIO)); if (ddi_soft_state_zalloc(zfsdev_state, minor) != DDI_SUCCESS) return (SET_ERROR(EAGAIN)); devfs_set_cdevpriv((void *)(uintptr_t)minor, zfsdev_close); zs = ddi_get_soft_state(zfsdev_state, minor); zs->zss_type = ZSST_CTLDEV; zfs_onexit_init((zfs_onexit_t **)&zs->zss_data); return (0); } static void zfs_ctldev_destroy(zfs_onexit_t *zo, minor_t minor) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); zfs_onexit_destroy(zo); ddi_soft_state_free(zfsdev_state, minor); } void * zfsdev_get_soft_state(minor_t minor, enum zfs_soft_state_type which) { zfs_soft_state_t *zp; zp = ddi_get_soft_state(zfsdev_state, minor); if (zp == NULL || zp->zss_type != which) return (NULL); return (zp->zss_data); } static int zfsdev_open(struct cdev *devp, int flag, int mode, struct thread *td) { int error = 0; #ifdef illumos if (getminor(*devp) != 0) return (zvol_open(devp, flag, otyp, cr)); #endif /* This is the control device. Allocate a new minor if requested. */ if (flag & FEXCL) { mutex_enter(&spa_namespace_lock); error = zfs_ctldev_init(devp); mutex_exit(&spa_namespace_lock); } return (error); } static void zfsdev_close(void *data) { zfs_onexit_t *zo; minor_t minor = (minor_t)(uintptr_t)data; if (minor == 0) return; mutex_enter(&spa_namespace_lock); zo = zfsdev_get_soft_state(minor, ZSST_CTLDEV); if (zo == NULL) { mutex_exit(&spa_namespace_lock); return; } zfs_ctldev_destroy(zo, minor); mutex_exit(&spa_namespace_lock); } static int zfsdev_ioctl(struct cdev *dev, u_long zcmd, caddr_t arg, int flag, struct thread *td) { zfs_cmd_t *zc; uint_t vecnum; int error, rc, len; #ifdef illumos minor_t minor = getminor(dev); #else zfs_iocparm_t *zc_iocparm; int cflag, cmd, oldvecnum; boolean_t newioc, compat; void *compat_zc = NULL; cred_t *cr = td->td_ucred; #endif const zfs_ioc_vec_t *vec; char *saved_poolname = NULL; nvlist_t *innvl = NULL; cflag = ZFS_CMD_COMPAT_NONE; compat = B_FALSE; newioc = B_TRUE; /* "new" style (zfs_iocparm_t) ioctl */ len = IOCPARM_LEN(zcmd); vecnum = cmd = zcmd & 0xff; /* * Check if we are talking to supported older binaries * and translate zfs_cmd if necessary */ if (len != sizeof(zfs_iocparm_t)) { newioc = B_FALSE; compat = B_TRUE; vecnum = cmd; switch (len) { case sizeof(zfs_cmd_zcmd_t): cflag = ZFS_CMD_COMPAT_LZC; break; case sizeof(zfs_cmd_deadman_t): cflag = ZFS_CMD_COMPAT_DEADMAN; break; case sizeof(zfs_cmd_v28_t): cflag = ZFS_CMD_COMPAT_V28; break; case sizeof(zfs_cmd_v15_t): if (cmd >= sizeof(zfs_ioctl_v15_to_v28) / sizeof(zfs_ioctl_v15_to_v28[0])) return (EINVAL); cflag = ZFS_CMD_COMPAT_V15; vecnum = zfs_ioctl_v15_to_v28[cmd]; /* * Return without further handling * if the command is blacklisted. */ if (vecnum == ZFS_IOC_COMPAT_PASS) return (0); else if (vecnum == ZFS_IOC_COMPAT_FAIL) return (ENOTSUP); break; default: return (EINVAL); } } #ifdef illumos vecnum = cmd - ZFS_IOC_FIRST; ASSERT3U(getmajor(dev), ==, ddi_driver_major(zfs_dip)); #endif if (vecnum >= sizeof (zfs_ioc_vec) / sizeof (zfs_ioc_vec[0])) return (SET_ERROR(EINVAL)); vec = &zfs_ioc_vec[vecnum]; zc = kmem_zalloc(sizeof(zfs_cmd_t), KM_SLEEP); #ifdef illumos error = ddi_copyin((void *)arg, zc, sizeof (zfs_cmd_t), flag); if (error != 0) { error = SET_ERROR(EFAULT); goto out; } #else /* !illumos */ bzero(zc, sizeof(zfs_cmd_t)); if (newioc) { zc_iocparm = (void *)arg; switch (zc_iocparm->zfs_ioctl_version) { case ZFS_IOCVER_CURRENT: if (zc_iocparm->zfs_cmd_size != sizeof(zfs_cmd_t)) { error = SET_ERROR(EINVAL); goto out; } break; case ZFS_IOCVER_INLANES: if (zc_iocparm->zfs_cmd_size != sizeof(zfs_cmd_inlanes_t)) { error = SET_ERROR(EFAULT); goto out; } compat = B_TRUE; cflag = ZFS_CMD_COMPAT_INLANES; break; case ZFS_IOCVER_RESUME: if (zc_iocparm->zfs_cmd_size != sizeof(zfs_cmd_resume_t)) { error = SET_ERROR(EFAULT); goto out; } compat = B_TRUE; cflag = ZFS_CMD_COMPAT_RESUME; break; case ZFS_IOCVER_EDBP: if (zc_iocparm->zfs_cmd_size != sizeof(zfs_cmd_edbp_t)) { error = SET_ERROR(EFAULT); goto out; } compat = B_TRUE; cflag = ZFS_CMD_COMPAT_EDBP; break; case ZFS_IOCVER_ZCMD: if (zc_iocparm->zfs_cmd_size > sizeof(zfs_cmd_t) || zc_iocparm->zfs_cmd_size < sizeof(zfs_cmd_zcmd_t)) { error = SET_ERROR(EFAULT); goto out; } compat = B_TRUE; cflag = ZFS_CMD_COMPAT_ZCMD; break; default: error = SET_ERROR(EINVAL); goto out; /* NOTREACHED */ } if (compat) { ASSERT(sizeof(zfs_cmd_t) >= zc_iocparm->zfs_cmd_size); compat_zc = kmem_zalloc(sizeof(zfs_cmd_t), KM_SLEEP); bzero(compat_zc, sizeof(zfs_cmd_t)); error = ddi_copyin((void *)(uintptr_t)zc_iocparm->zfs_cmd, compat_zc, zc_iocparm->zfs_cmd_size, flag); if (error != 0) { error = SET_ERROR(EFAULT); goto out; } } else { error = ddi_copyin((void *)(uintptr_t)zc_iocparm->zfs_cmd, zc, zc_iocparm->zfs_cmd_size, flag); if (error != 0) { error = SET_ERROR(EFAULT); goto out; } } } if (compat) { if (newioc) { ASSERT(compat_zc != NULL); zfs_cmd_compat_get(zc, compat_zc, cflag); } else { ASSERT(compat_zc == NULL); zfs_cmd_compat_get(zc, arg, cflag); } oldvecnum = vecnum; error = zfs_ioctl_compat_pre(zc, &vecnum, cflag); if (error != 0) goto out; if (oldvecnum != vecnum) vec = &zfs_ioc_vec[vecnum]; } #endif /* !illumos */ zc->zc_iflags = flag & FKIOCTL; if (zc->zc_nvlist_src_size != 0) { error = get_nvlist(zc->zc_nvlist_src, zc->zc_nvlist_src_size, zc->zc_iflags, &innvl); if (error != 0) goto out; } /* rewrite innvl for backwards compatibility */ if (compat) innvl = zfs_ioctl_compat_innvl(zc, innvl, vecnum, cflag); /* * Ensure that all pool/dataset names are valid before we pass down to * the lower layers. */ zc->zc_name[sizeof (zc->zc_name) - 1] = '\0'; switch (vec->zvec_namecheck) { case POOL_NAME: if (pool_namecheck(zc->zc_name, NULL, NULL) != 0) error = SET_ERROR(EINVAL); else error = pool_status_check(zc->zc_name, vec->zvec_namecheck, vec->zvec_pool_check); break; case DATASET_NAME: if (dataset_namecheck(zc->zc_name, NULL, NULL) != 0) error = SET_ERROR(EINVAL); else error = pool_status_check(zc->zc_name, vec->zvec_namecheck, vec->zvec_pool_check); break; case NO_NAME: break; } if (error == 0) error = vec->zvec_secpolicy(zc, innvl, cr); if (error != 0) goto out; /* legacy ioctls can modify zc_name */ len = strcspn(zc->zc_name, "/@#") + 1; saved_poolname = kmem_alloc(len, KM_SLEEP); (void) strlcpy(saved_poolname, zc->zc_name, len); if (vec->zvec_func != NULL) { nvlist_t *outnvl; int puterror = 0; spa_t *spa; nvlist_t *lognv = NULL; ASSERT(vec->zvec_legacy_func == NULL); /* * Add the innvl to the lognv before calling the func, * in case the func changes the innvl. */ if (vec->zvec_allow_log) { lognv = fnvlist_alloc(); fnvlist_add_string(lognv, ZPOOL_HIST_IOCTL, vec->zvec_name); if (!nvlist_empty(innvl)) { fnvlist_add_nvlist(lognv, ZPOOL_HIST_INPUT_NVL, innvl); } } outnvl = fnvlist_alloc(); error = vec->zvec_func(zc->zc_name, innvl, outnvl); /* * Some commands can partially execute, modfiy state, and still * return an error. In these cases, attempt to record what * was modified. */ if ((error == 0 || (cmd == ZFS_IOC_CHANNEL_PROGRAM && error != EINVAL)) && vec->zvec_allow_log && spa_open(zc->zc_name, &spa, FTAG) == 0) { if (!nvlist_empty(outnvl)) { fnvlist_add_nvlist(lognv, ZPOOL_HIST_OUTPUT_NVL, outnvl); } if (error != 0) { fnvlist_add_int64(lognv, ZPOOL_HIST_ERRNO, error); } (void) spa_history_log_nvl(spa, lognv); spa_close(spa, FTAG); } fnvlist_free(lognv); /* rewrite outnvl for backwards compatibility */ if (compat) outnvl = zfs_ioctl_compat_outnvl(zc, outnvl, vecnum, cflag); if (!nvlist_empty(outnvl) || zc->zc_nvlist_dst_size != 0) { int smusherror = 0; if (vec->zvec_smush_outnvlist) { smusherror = nvlist_smush(outnvl, zc->zc_nvlist_dst_size); } if (smusherror == 0) puterror = put_nvlist(zc, outnvl); } if (puterror != 0) error = puterror; nvlist_free(outnvl); } else { error = vec->zvec_legacy_func(zc); } out: nvlist_free(innvl); #ifdef illumos rc = ddi_copyout(zc, (void *)arg, sizeof (zfs_cmd_t), flag); if (error == 0 && rc != 0) error = SET_ERROR(EFAULT); #else if (compat) { zfs_ioctl_compat_post(zc, cmd, cflag); if (newioc) { ASSERT(compat_zc != NULL); ASSERT(sizeof(zfs_cmd_t) >= zc_iocparm->zfs_cmd_size); zfs_cmd_compat_put(zc, compat_zc, vecnum, cflag); rc = ddi_copyout(compat_zc, (void *)(uintptr_t)zc_iocparm->zfs_cmd, zc_iocparm->zfs_cmd_size, flag); if (error == 0 && rc != 0) error = SET_ERROR(EFAULT); kmem_free(compat_zc, sizeof (zfs_cmd_t)); } else { zfs_cmd_compat_put(zc, arg, vecnum, cflag); } } else { ASSERT(newioc); rc = ddi_copyout(zc, (void *)(uintptr_t)zc_iocparm->zfs_cmd, sizeof (zfs_cmd_t), flag); if (error == 0 && rc != 0) error = SET_ERROR(EFAULT); } #endif if (error == 0 && vec->zvec_allow_log) { char *s = tsd_get(zfs_allow_log_key); if (s != NULL) strfree(s); (void) tsd_set(zfs_allow_log_key, saved_poolname); } else { if (saved_poolname != NULL) strfree(saved_poolname); } kmem_free(zc, sizeof (zfs_cmd_t)); return (error); } #ifdef illumos static int zfs_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) { if (cmd != DDI_ATTACH) return (DDI_FAILURE); if (ddi_create_minor_node(dip, "zfs", S_IFCHR, 0, DDI_PSEUDO, 0) == DDI_FAILURE) return (DDI_FAILURE); zfs_dip = dip; ddi_report_dev(dip); return (DDI_SUCCESS); } static int zfs_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) { if (spa_busy() || zfs_busy() || zvol_busy()) return (DDI_FAILURE); if (cmd != DDI_DETACH) return (DDI_FAILURE); zfs_dip = NULL; ddi_prop_remove_all(dip); ddi_remove_minor_node(dip, NULL); return (DDI_SUCCESS); } /*ARGSUSED*/ static int zfs_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { switch (infocmd) { case DDI_INFO_DEVT2DEVINFO: *result = zfs_dip; return (DDI_SUCCESS); case DDI_INFO_DEVT2INSTANCE: *result = (void *)0; return (DDI_SUCCESS); } return (DDI_FAILURE); } #endif /* illumos */ /* * OK, so this is a little weird. * * /dev/zfs is the control node, i.e. minor 0. * /dev/zvol/[r]dsk/pool/dataset are the zvols, minor > 0. * * /dev/zfs has basically nothing to do except serve up ioctls, * so most of the standard driver entry points are in zvol.c. */ #ifdef illumos static struct cb_ops zfs_cb_ops = { zfsdev_open, /* open */ zfsdev_close, /* close */ zvol_strategy, /* strategy */ nodev, /* print */ zvol_dump, /* dump */ zvol_read, /* read */ zvol_write, /* write */ zfsdev_ioctl, /* ioctl */ nodev, /* devmap */ nodev, /* mmap */ nodev, /* segmap */ nochpoll, /* poll */ ddi_prop_op, /* prop_op */ NULL, /* streamtab */ D_NEW | D_MP | D_64BIT, /* Driver compatibility flag */ CB_REV, /* version */ nodev, /* async read */ nodev, /* async write */ }; static struct dev_ops zfs_dev_ops = { DEVO_REV, /* version */ 0, /* refcnt */ zfs_info, /* info */ nulldev, /* identify */ nulldev, /* probe */ zfs_attach, /* attach */ zfs_detach, /* detach */ nodev, /* reset */ &zfs_cb_ops, /* driver operations */ NULL, /* no bus operations */ NULL, /* power */ ddi_quiesce_not_needed, /* quiesce */ }; static struct modldrv zfs_modldrv = { &mod_driverops, "ZFS storage pool", &zfs_dev_ops }; static struct modlinkage modlinkage = { MODREV_1, (void *)&zfs_modlfs, (void *)&zfs_modldrv, NULL }; #endif /* illumos */ static struct cdevsw zfs_cdevsw = { .d_version = D_VERSION, .d_open = zfsdev_open, .d_ioctl = zfsdev_ioctl, .d_name = ZFS_DEV_NAME }; static void zfs_allow_log_destroy(void *arg) { char *poolname = arg; strfree(poolname); } static void zfsdev_init(void) { zfsdev = make_dev(&zfs_cdevsw, 0x0, UID_ROOT, GID_OPERATOR, 0666, ZFS_DEV_NAME); } static void zfsdev_fini(void) { if (zfsdev != NULL) destroy_dev(zfsdev); } static struct root_hold_token *zfs_root_token; struct proc *zfsproc; #ifdef illumos int _init(void) { int error; spa_init(FREAD | FWRITE); zfs_init(); zvol_init(); zfs_ioctl_init(); if ((error = mod_install(&modlinkage)) != 0) { zvol_fini(); zfs_fini(); spa_fini(); return (error); } tsd_create(&zfs_fsyncer_key, NULL); tsd_create(&rrw_tsd_key, rrw_tsd_destroy); tsd_create(&zfs_allow_log_key, zfs_allow_log_destroy); error = ldi_ident_from_mod(&modlinkage, &zfs_li); ASSERT(error == 0); mutex_init(&zfs_share_lock, NULL, MUTEX_DEFAULT, NULL); return (0); } int _fini(void) { int error; if (spa_busy() || zfs_busy() || zvol_busy() || zio_injection_enabled) return (SET_ERROR(EBUSY)); if ((error = mod_remove(&modlinkage)) != 0) return (error); zvol_fini(); zfs_fini(); spa_fini(); if (zfs_nfsshare_inited) (void) ddi_modclose(nfs_mod); if (zfs_smbshare_inited) (void) ddi_modclose(smbsrv_mod); if (zfs_nfsshare_inited || zfs_smbshare_inited) (void) ddi_modclose(sharefs_mod); tsd_destroy(&zfs_fsyncer_key); ldi_ident_release(zfs_li); zfs_li = NULL; mutex_destroy(&zfs_share_lock); return (error); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } #endif /* illumos */ static int zfs__init(void); static int zfs__fini(void); static void zfs_shutdown(void *, int); static eventhandler_tag zfs_shutdown_event_tag; #ifdef __FreeBSD__ #define ZFS_MIN_KSTACK_PAGES 4 #endif int zfs__init(void) { #ifdef __FreeBSD__ #if KSTACK_PAGES < ZFS_MIN_KSTACK_PAGES printf("ZFS NOTICE: KSTACK_PAGES is %d which could result in stack " "overflow panic!\nPlease consider adding " "'options KSTACK_PAGES=%d' to your kernel config\n", KSTACK_PAGES, ZFS_MIN_KSTACK_PAGES); #endif #endif zfs_root_token = root_mount_hold("ZFS"); mutex_init(&zfs_share_lock, NULL, MUTEX_DEFAULT, NULL); spa_init(FREAD | FWRITE); zfs_init(); zvol_init(); zfs_ioctl_init(); tsd_create(&zfs_fsyncer_key, NULL); tsd_create(&rrw_tsd_key, rrw_tsd_destroy); tsd_create(&zfs_allow_log_key, zfs_allow_log_destroy); tsd_create(&zfs_geom_probe_vdev_key, NULL); printf("ZFS storage pool version: features support (" SPA_VERSION_STRING ")\n"); root_mount_rel(zfs_root_token); zfsdev_init(); return (0); } int zfs__fini(void) { if (spa_busy() || zfs_busy() || zvol_busy() || zio_injection_enabled) { return (EBUSY); } zfsdev_fini(); zvol_fini(); zfs_fini(); spa_fini(); tsd_destroy(&zfs_fsyncer_key); tsd_destroy(&rrw_tsd_key); tsd_destroy(&zfs_allow_log_key); mutex_destroy(&zfs_share_lock); return (0); } static void zfs_shutdown(void *arg __unused, int howto __unused) { /* * ZFS fini routines can not properly work in a panic-ed system. */ if (panicstr == NULL) (void)zfs__fini(); } static int zfs_modevent(module_t mod, int type, void *unused __unused) { int err; switch (type) { case MOD_LOAD: err = zfs__init(); if (err == 0) zfs_shutdown_event_tag = EVENTHANDLER_REGISTER( shutdown_post_sync, zfs_shutdown, NULL, SHUTDOWN_PRI_FIRST); return (err); case MOD_UNLOAD: err = zfs__fini(); if (err == 0 && zfs_shutdown_event_tag != NULL) EVENTHANDLER_DEREGISTER(shutdown_post_sync, zfs_shutdown_event_tag); return (err); case MOD_SHUTDOWN: return (0); default: break; } return (EOPNOTSUPP); } static moduledata_t zfs_mod = { "zfsctrl", zfs_modevent, 0 }; DECLARE_MODULE(zfsctrl, zfs_mod, SI_SUB_VFS, SI_ORDER_ANY); MODULE_VERSION(zfsctrl, 1); MODULE_DEPEND(zfsctrl, opensolaris, 1, 1, 1); MODULE_DEPEND(zfsctrl, krpc, 1, 1, 1); MODULE_DEPEND(zfsctrl, acl_nfs4, 1, 1, 1); +MODULE_DEPEND(zfsctrl, zlib, 1, 1, 1); Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h (nonexistent) @@ -1,1359 +0,0 @@ -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.3, July 18th, 2005 - - Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -*/ - -#ifndef _ZLIB_H -#define _ZLIB_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zconf.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#define ZLIB_VERSION "1.2.3" -#define ZLIB_VERNUM 0x1230 - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed - data. This version of the library supports only one compression method - (deflation) but other algorithms will be added later and will have the same - stream interface. - - Compression can be done in a single step if the buffers are large - enough (for example if an input file is mmap'ed), or can be done by - repeated calls of the compression function. In the latter case, the - application must provide more input and/or consume the output - (providing more output space) before each call. - - The compressed data format used by default by the in-memory functions is - the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped - around a deflate stream, which is itself documented in RFC 1951. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio using the functions that start - with "gz". The gzip format is different from the zlib format. gzip is a - gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. - - This library can optionally read and write gzip streams in memory as well. - - The zlib format was designed to be compact and fast for use in memory - and on communications channels. The gzip format was designed for single- - file compression on file systems, has a larger header than zlib to maintain - directory information, and uses a different, slower check method than zlib. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never - crash even in case of corrupted input. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address)); - -struct internal_state; - -typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ - - char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ - - int data_type; /* best guess about the data type: binary or text */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ -} z_stream; - -typedef z_stream FAR *z_streamp; - -/* - gzip header information passed to and from zlib routines. See RFC 1952 - for more details on the meanings of these fields. -*/ -typedef struct gz_header_s { - int text; /* true if compressed data believed to be text */ - uLong time; /* modification time */ - int xflags; /* extra flags (not used when writing a gzip file) */ - int os; /* operating system */ - Bytef *extra; /* pointer to extra field or Z_NULL if none */ - uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ - uInt extra_max; /* space at extra (only when reading header) */ - Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ - uInt name_max; /* space at name (only when reading header) */ - Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ - uInt comm_max; /* space at comment (only when reading header) */ - int hcrc; /* true if there was or will be a header crc */ - int done; /* true when done reading gzip header (not used - when writing a gzip file) */ -} gz_header; - -typedef gz_header FAR *gz_headerp; - -/* - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe. - - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -#define Z_BLOCK 5 -/* Allowed flush values; see deflate() and inflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative - * values are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_RLE 3 -#define Z_FIXED 4 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_TEXT 1 -#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ -#define Z_UNKNOWN 2 -/* Possible values of the data_type field (though see inflate()) */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - /* basic functions */ - -ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. - This check is automatically made by deflateInit and inflateInit. - */ - -/* -ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. - If zalloc and zfree are set to Z_NULL, deflateInit updates them to - use default allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at - all (the input data is simply copied a block at a time). - Z_DEFAULT_COMPRESSION requests a default compromise between speed and - compression (currently equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if level is not a valid compression level, - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). - msg is set to null if there is no error message. deflateInit does not - perform any compression: this will be done by deflate(). -*/ - - -ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); -/* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce some - output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. deflate performs one or both of the - following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). - Some output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating avail_in or avail_out accordingly; avail_out - should never be zero before the call. The application can consume the - compressed output when it wants, for example when the output buffer is full - (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK - and with zero avail_out, it must be called again after making room in the - output buffer because there might be more output pending. - - Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to - decide how much data to accumualte before producing output, in order to - maximize compression. - - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In particular - avail_in is zero after the call if enough output space has been provided - before the call.) Flushing may degrade compression for some compression - algorithms and so it should be used only when necessary. - - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - compression. - - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that - avail_out is greater than six to avoid repeated flush markers due to - avail_out == 0 on return. - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there - was enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the - stream are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least - the value returned by deflateBound (see below). If deflate does not return - Z_STREAM_END, then it must be called again as described above. - - deflate() sets strm->adler to the adler32 checksum of all input read - so far (that is, total_in bytes). - - deflate() may update strm->data_type if it can make a good guess about - the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered - binary. This field is only for information purposes and does not affect - the compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not - fatal, and deflate() can be called again with more input and more output - space to continue compressing. -*/ - - -ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, - msg may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the exact - value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller. msg is set to null if there is no error - message. inflateInit does not perform any decompression apart from reading - the zlib header if present: this will be done by inflate(). (So next_in and - avail_in may be modified, but next_out and avail_out are unchanged.) -*/ - - -ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); -/* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. inflate performs one or both of the - following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing - will resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there - is no more input data or no more space in the output buffer (see below - about the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating the next_* and avail_* values accordingly. - The application can consume the uncompressed output when it wants, for - example when the output buffer is full (avail_out == 0), or after each - call of inflate(). If inflate returns Z_OK and with zero avail_out, it - must be called again after making room in the output buffer because there - might be more output pending. - - The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, - Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much - output as possible to the output buffer. Z_BLOCK requests that inflate() stop - if and when it gets to the next deflate block boundary. When decoding the - zlib or gzip format, this will cause inflate() to return immediately after - the header and before the first block. When doing a raw inflate, inflate() - will go ahead and process the first block, and will return when it gets to - the end of that block, or when it runs out of data. - - The Z_BLOCK option assists in appending to or combining deflate streams. - Also to assist in this, on return inflate() will set strm->data_type to the - number of unused bits in the last byte taken from strm->next_in, plus 64 - if inflate() is currently decoding the last block in the deflate stream, - plus 128 if inflate() returned immediately after decoding an end-of-block - code or decoding the complete header up to just before the first byte of the - deflate stream. The end-of-block will not be indicated until all of the - uncompressed data from that block has been written to strm->next_out. The - number of unused bits may in general be greater than seven, except when - bit 7 of data_type is set, in which case the number of unused bits will be - less than eight. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step - (a single call of inflate), the parameter flush should be set to - Z_FINISH. In this case all pending input is processed and all pending - output is flushed; avail_out must be large enough to hold all the - uncompressed data. (The size of the uncompressed data may have been saved - by the compressor for this purpose.) The next operation on this stream must - be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster approach - may be used for the single inflate() call. - - In this implementation, inflate() always flushes as much output as - possible to the output buffer, and always uses the faster approach on the - first call. So the only effect of the flush parameter in this implementation - is on the return value of inflate(), as noted below, or when it returns early - because Z_BLOCK is used. - - If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the adler32 checksum of the dictionary - chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the adler32 checksum of all output produced so far (that is, - total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described - below. At the end of the stream, inflate() checks that its computed adler32 - checksum is equal to that saved by the compressor and returns Z_STREAM_END - only if the checksum is correct. - - inflate() will decompress and check either zlib-wrapped or gzip-wrapped - deflate data. The header type is detected automatically. Any information - contained in the gzip header is not retained, so applications that need that - information should instead use raw inflate, see inflateInit2() below, or - inflateBack() and perform their own processing of the gzip header and - trailer. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect check - value), Z_STREAM_ERROR if the stream structure was inconsistent (for example - if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in the - output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and - inflate() can be called again with more input and more output space to - continue decompressing. If Z_DATA_ERROR is returned, the application may then - call inflateSync() to look for a good compression block if a partial recovery - of the data is desired. -*/ - - -ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by - the caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead. - - windowBits can also be -8..-15 for raw deflate. In this case, -windowBits - determines the window size. deflate() will then generate raw deflate data - with no zlib header or trailer, and will not compute an adler32 check value. - - windowBits can also be greater than 15 for optional gzip encoding. Add - 16 to windowBits to write a simple gzip header and trailer around the - compressed data instead of a zlib wrapper. The gzip header will have no - file name, no extra data, no comment, no modification time (set to zero), - no header crc, and the operating system will be set to 255 (unknown). If a - gzip stream is being written, strm->adler is a crc32 instead of an adler32. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but - is slow and reduces compression ratio; memLevel=9 uses maximum memory - for optimal speed. The default value is 8. See zconf.h for total memory - usage as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match), or Z_RLE to limit match distances to one (run-length - encoding). Filtered data consists mostly of small values with a somewhat - random distribution. In this case, the compression algorithm is tuned to - compress them better. The effect of Z_FILTERED is to force more Huffman - coding and less string matching; it is somewhat intermediate between - Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as - Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy - parameter only affects the compression ratio but not the correctness of the - compressed output even if it is not set appropriately. Z_FIXED prevents the - use of dynamic Huffman codes, allowing for a simpler decoder for special - applications. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid - method). msg is set to null if there is no error message. deflateInit2 does - not perform any compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any - call of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size in - deflate or deflate2. Thus the strings most likely to be useful should be - put at the end of the dictionary, not at the front. In addition, the - current implementation of deflate will use at most the window size minus - 262 bytes of the provided dictionary. - - Upon return of this function, strm->adler is set to the adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) If a raw deflate was requested, then the - adler32 value is not computed and strm->adler is not set. - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and - can consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. - The stream will keep the same compression level and any other attributes - that may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, - int level, - int strategy)); -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different - strategy. If the compression level is changed, the input available so far - is compressed with the old level (and may be flushed); the new level will - take effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to - be compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR - if strm->avail_out was zero. -*/ - -ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, - int good_length, - int max_lazy, - int nice_length, - int max_chain)); -/* - Fine tune deflate's internal compression parameters. This should only be - used by someone who understands the algorithm used by zlib's deflate for - searching for the best matching string, and even then only by the most - fanatic optimizer trying to squeeze out the last compressed bit for their - specific input data. Read the deflate.c source code for the meaning of the - max_lazy, good_length, nice_length, and max_chain parameters. - - deflateTune() can be called after deflateInit() or deflateInit2(), and - returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. - */ - -ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, - uLong sourceLen)); -/* - deflateBound() returns an upper bound on the compressed size after - deflation of sourceLen bytes. It must be called after deflateInit() - or deflateInit2(). This would be used to allocate an output buffer - for deflation in a single pass, and so would be called before deflate(). -*/ - -ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - deflatePrime() inserts bits in the deflate output stream. The intent - is that this function is used to start off the deflate output with the - bits leftover from a previous deflate stream when appending to it. As such, - this function can only be used for raw deflate, and must be used before the - first deflate() call after a deflateInit2() or deflateReset(). bits must be - less than or equal to 16, and that many of the least significant bits of - value will be inserted in the output. - - deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, - gz_headerp head)); -/* - deflateSetHeader() provides gzip header information for when a gzip - stream is requested by deflateInit2(). deflateSetHeader() may be called - after deflateInit2() or deflateReset() and before the first call of - deflate(). The text, time, os, extra field, name, and comment information - in the provided gz_header structure are written to the gzip header (xflag is - ignored -- the extra flags are set according to the compression level). The - caller must assure that, if not Z_NULL, name and comment are terminated with - a zero byte, and that if extra is not Z_NULL, that extra_len bytes are - available there. If hcrc is true, a gzip header crc is included. Note that - the current versions of the command-line version of gzip (up through version - 1.3.x) do not support header crc's, and will report that it is a "multi-part - gzip file" and give up. - - If deflateSetHeader is not used, the default gzip header has text false, - the time set to zero, and os set to 255, with no extra, name, or comment - fields. The gzip header is returned to the default state by deflateReset(). - - deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. windowBits must be greater than or equal to the windowBits value - provided to deflateInit2() while compressing, or it must be equal to 15 if - deflateInit2() was not used. If a compressed stream with a larger window - size is given as input, inflate() will return with the error code - Z_DATA_ERROR instead of trying to allocate a larger window. - - windowBits can also be -8..-15 for raw inflate. In this case, -windowBits - determines the window size. inflate() will then process raw deflate data, - not looking for a zlib or gzip header, not generating a check value, and not - looking for any check values for comparison at the end of the stream. This - is for use with other formats that use the deflate compressed data format - such as zip. Those formats provide their own check values. If a custom - format is developed using the raw deflate format for compressed data, it is - recommended that a check value such as an adler32 or a crc32 be applied to - the uncompressed data as is done in the zlib, gzip, and zip formats. For - most applications, the zlib format should be used as is. Note that comments - above on the use in deflateInit2() applies to the magnitude of windowBits. - - windowBits can also be greater than 15 for optional gzip decoding. Add - 32 to windowBits to enable zlib and gzip decoding with automatic header - detection, or add 16 to decode only the gzip format (the zlib format will - return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is - a crc32 instead of an adler32. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg - is set to null if there is no error message. inflateInit2 does not perform - any decompression apart from reading the zlib header if present: this will - be done by inflate(). (So next_in and avail_in may be modified, but next_out - and avail_out are unchanged.) -*/ - -ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate, - if that call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by that call of inflate. - The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called - immediately after inflateInit2() or inflateReset() and before any call of - inflate() to set the dictionary. The application must insure that the - dictionary that was used for compression is provided. - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); -/* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data. -*/ - -ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when randomly accessing a large stream. The - first pass through the stream can periodically record the inflate state, - allowing restarting inflate at those points when randomly accessing the - stream. - - inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. - The stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - This function inserts bits in the inflate input stream. The intent is - that this function is used to start inflating at a bit position in the - middle of a byte. The provided bits will be used before any bytes are used - from next_in. This function should only be used with raw inflate, and - should be used before the first inflate() call after inflateInit2() or - inflateReset(). bits must be less than or equal to 16, and that many of the - least significant bits of value will be inserted in the input. - - inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, - gz_headerp head)); -/* - inflateGetHeader() requests that gzip header information be stored in the - provided gz_header structure. inflateGetHeader() may be called after - inflateInit2() or inflateReset(), and before the first call of inflate(). - As inflate() processes the gzip stream, head->done is zero until the header - is completed, at which time head->done is set to one. If a zlib stream is - being decoded, then head->done is set to -1 to indicate that there will be - no gzip header information forthcoming. Note that Z_BLOCK can be used to - force inflate() to return immediately after header processing is complete - and before any actual data is decompressed. - - The text, time, xflags, and os fields are filled in with the gzip header - contents. hcrc is set to true if there is a header CRC. (The header CRC - was valid if done is set to one.) If extra is not Z_NULL, then extra_max - contains the maximum number of bytes to write to extra. Once done is true, - extra_len contains the actual extra field length, and extra contains the - extra field, or that field truncated if extra_max is less than extra_len. - If name is not Z_NULL, then up to name_max characters are written there, - terminated with a zero unless the length is greater than name_max. If - comment is not Z_NULL, then up to comm_max characters are written there, - terminated with a zero unless the length is greater than comm_max. When - any of extra, name, or comment are not Z_NULL and the respective field is - not present in the header, then that field is set to Z_NULL to signal its - absence. This allows the use of deflateSetHeader() with the returned - structure to duplicate the header. However if those fields are set to - allocated memory, then the application will need to save those pointers - elsewhere so that they can be eventually freed. - - If inflateGetHeader is not used, then the header information is simply - discarded. The header is always checked for validity, including the header - CRC if present. inflateReset() will reset the process to discard the header - information. The application would need to call inflateGetHeader() again to - retrieve the header from the next gzip stream. - - inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, - unsigned char FAR *window)); - - Initialize the internal stream state for decompression using inflateBack() - calls. The fields zalloc, zfree and opaque in strm must be initialized - before the call. If zalloc and zfree are Z_NULL, then the default library- - derived memory allocation routines are used. windowBits is the base two - logarithm of the window size, in the range 8..15. window is a caller - supplied buffer of that size. Except for special applications where it is - assured that deflate was used with small window sizes, windowBits must be 15 - and a 32K byte window must be supplied to be able to decompress general - deflate streams. - - See inflateBack() for the usage of these routines. - - inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of - the paramaters are invalid, Z_MEM_ERROR if the internal state could not - be allocated, or Z_VERSION_ERROR if the version of the library does not - match the version of the header file. -*/ - -typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); -typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); - -ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, - in_func in, void FAR *in_desc, - out_func out, void FAR *out_desc)); -/* - inflateBack() does a raw inflate with a single call using a call-back - interface for input and output. This is more efficient than inflate() for - file i/o applications in that it avoids copying between the output and the - sliding window by simply making the window itself the output buffer. This - function trusts the application to not change the output buffer passed by - the output function, at least until inflateBack() returns. - - inflateBackInit() must be called first to allocate the internal state - and to initialize the state with the user-provided window buffer. - inflateBack() may then be used multiple times to inflate a complete, raw - deflate stream with each call. inflateBackEnd() is then called to free - the allocated state. - - A raw deflate stream is one with no zlib or gzip header or trailer. - This routine would normally be used in a utility that reads zip or gzip - files and writes out uncompressed files. The utility would decode the - header and process the trailer on its own, hence this routine expects - only the raw deflate stream to decompress. This is different from the - normal behavior of inflate(), which expects either a zlib or gzip header and - trailer around the deflate stream. - - inflateBack() uses two subroutines supplied by the caller that are then - called by inflateBack() for input and output. inflateBack() calls those - routines until it reads a complete deflate stream and writes out all of the - uncompressed data, or until it encounters an error. The function's - parameters and return types are defined above in the in_func and out_func - typedefs. inflateBack() will call in(in_desc, &buf) which should return the - number of bytes of provided input, and a pointer to that input in buf. If - there is no input available, in() must return zero--buf is ignored in that - case--and inflateBack() will return a buffer error. inflateBack() will call - out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() - should return zero on success, or non-zero on failure. If out() returns - non-zero, inflateBack() will return with an error. Neither in() nor out() - are permitted to change the contents of the window provided to - inflateBackInit(), which is also the buffer that out() uses to write from. - The length written by out() will be at most the window size. Any non-zero - amount of input may be provided by in(). - - For convenience, inflateBack() can be provided input on the first call by - setting strm->next_in and strm->avail_in. If that input is exhausted, then - in() will be called. Therefore strm->next_in must be initialized before - calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called - immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in - must also be initialized, and then if strm->avail_in is not zero, input will - initially be taken from strm->next_in[0 .. strm->avail_in - 1]. - - The in_desc and out_desc parameters of inflateBack() is passed as the - first parameter of in() and out() respectively when they are called. These - descriptors can be optionally used to pass any information that the caller- - supplied in() and out() functions need to do their job. - - On return, inflateBack() will set strm->next_in and strm->avail_in to - pass back any unused input that was provided by the last in() call. The - return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR - if in() or out() returned an error, Z_DATA_ERROR if there was a format - error in the deflate stream (in which case strm->msg is set to indicate the - nature of the error), or Z_STREAM_ERROR if the stream was not properly - initialized. In the case of Z_BUF_ERROR, an input or output error can be - distinguished using strm->next_in which will be Z_NULL only if in() returned - an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to - out() returning non-zero. (in() will always be called before out(), so - strm->next_in is assured to be defined if out() returns non-zero.) Note - that inflateBack() cannot return Z_OK. -*/ - -ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); -/* - All memory allocated by inflateBackInit() is freed. - - inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream - state was inconsistent. -*/ - -ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); -/* Return flags indicating compile-time options. - - Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: - 1.0: size of uInt - 3.2: size of uLong - 5.4: size of voidpf (pointer) - 7.6: size of z_off_t - - Compiler, assembler, and debug options: - 8: DEBUG - 9: ASMV or ASMINF -- use ASM code - 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention - 11: 0 (reserved) - - One-time table building (smaller code, but not thread-safe if true): - 12: BUILDFIXED -- build static block decoding tables when needed - 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed - 14,15: 0 (reserved) - - Library content (indicates missing functionality): - 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking - deflate code when not needed) - 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect - and decode gzip streams (to avoid linking crc code) - 18-19: 0 (reserved) - - Operation variations (changes in library functionality): - 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate - 21: FASTEST -- deflate algorithm with only one, lowest compression level - 22,23: 0 (reserved) - - The sprintf variant used by gzprintf (zero is best): - 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format - 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! - 26: 0 = returns value, 1 = void -- 1 means inferred string length returned - - Remainder: - 27-31: 0 (reserved) - */ - - - /* utility functions */ - -/* - The following utility functions are implemented on top of the - basic stream-oriented functions. To simplify the interface, some - default options are assumed (compression level and memory usage, - standard memory allocation functions). The source code of these - utility functions can easily be modified if you need special options. -*/ - -ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be at least the value returned - by compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - This function can be used to compress a whole file at once if the - input file is mmap'ed. - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level)); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); -/* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before - a compress() or compress2() call to allocate the destination buffer. -*/ - -ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer. - This function can be used to decompress a whole file at once if the - input file is mmap'ed. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. -*/ - - -typedef voidp gzFile; - -ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); -/* - Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb") but can also include a compression level - ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for - Huffman only compression as in "wb1h", or 'R' for run-length encoding - as in "wb1R". (See the description of deflateInit2 for more information - about the strategy parameter.) - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. - - gzopen returns NULL if the file could not be opened or if there was - insufficient memory to allocate the (de)compression state; errno - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). */ - -ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -/* - gzdopen() associates a gzFile with the file descriptor fd. File - descriptors are obtained from calls like open, dup, creat, pipe or - fileno (in the file has been previously opened with fopen). - The mode parameter is as in gzopen. - The next call of gzclose on the returned gzFile will also close the - file descriptor fd, just like fclose(fdopen(fd), mode) closes the file - descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). - gzdopen returns NULL if there was insufficient memory to allocate - the (de)compression state. -*/ - -ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. - gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -*/ - -ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. - If the input file was not in gzip format, gzread copies the given number - of bytes into the buffer. - gzread returns the number of uncompressed bytes actually read (0 for - end of file, -1 for error). */ - -ZEXTERN int ZEXPORT gzwrite OF((gzFile file, - voidpc buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes actually written - (0 in case of error). -*/ - -ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the args to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written (0 in case of error). The number of - uncompressed bytes written is limited to 4095. The caller should assure that - this limit is not exceeded. If it is exceeded, then gzprintf() will return - return an error (0) with nothing written. In this case, there may also be a - buffer overflow with unpredictable consequences, which is possible only if - zlib was compiled with the insecure functions sprintf() or vsprintf() - because the secure snprintf() or vsnprintf() functions were not available. -*/ - -ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - gzputs returns the number of characters written, or -1 in case of error. -*/ - -ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or - a newline character is read and transferred to buf, or an end-of-file - condition is encountered. The string is then terminated with a null - character. - gzgets returns buf, or Z_NULL in case of error. -*/ - -ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. - gzputc returns the value that was written, or -1 in case of error. -*/ - -ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte - or -1 in case of end of file or error. -*/ - -ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); -/* - Push one character back onto the stream to be read again later. - Only one character of push-back is allowed. gzungetc() returns the - character pushed, or -1 on failure. gzungetc() will fail if a - character has been pushed but not read yet, or if c is -1. The pushed - character will be discarded if the stream is repositioned with gzseek() - or gzrewind(). -*/ - -ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. The return value is the zlib - error number (see function gzerror below). gzflush returns Z_OK if - the flush parameter is Z_FINISH and all output could be flushed. - gzflush should be called only when strictly necessary because it can - degrade compression. -*/ - -ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, - z_off_t offset, int whence)); -/* - Sets the starting position for the next gzread or gzwrite on the - given compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); -/* - Returns the starting position for the next gzread or gzwrite on the - given compressed file. This position represents a number of bytes in the - uncompressed data stream. - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -/* - Returns 1 when EOF has previously been detected reading the given - input stream, otherwise zero. -*/ - -ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); -/* - Returns 1 if file is being read directly without decompression, otherwise - zero. -*/ - -ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. The return value is the zlib - error number (see function gzerror below). -*/ - -ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the - given compressed file. errnum is set to zlib error number. If an - error occurred in the file system and not in the compression library, - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. -*/ - -ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); -/* - Clears the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip - file that is being written concurrently. -*/ - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the - compression library. -*/ - -ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is NULL, this function returns - the required initial value for the checksum. - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, - z_off_t len2)); -/* - Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 - and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for - each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. -*/ - -ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -/* - Update a running CRC-32 with the bytes buf[0..len-1] and return the - updated CRC-32. If buf is NULL, this function returns the required initial - value for the for the crc. Pre- and post-conditioning (one's complement) is - performed within this function so it shouldn't be done by the application. - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - -ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); - -/* - Combine two CRC-32 check values into one. For two sequences of bytes, - seq1 and seq2 with lengths len1 and len2, CRC-32 check values were - calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 - check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and - len2. -*/ - - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ -ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); -ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, - unsigned char FAR *window, - const char *version, - int stream_size)); -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) -#define inflateBackInit(strm, windowBits, window) \ - inflateBackInit_((strm), (windowBits), (window), \ - ZLIB_VERSION, sizeof(z_stream)) - - -#if !defined(_ZUTIL_H) && !defined(NO_DUMMY_DECL) - struct internal_state {int dummy;}; /* hack for buggy compilers */ -#endif - -ZEXTERN const char * ZEXPORT zError OF((int)); -ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); -ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); - -#ifdef __cplusplus -} -#endif - -#endif /* _ZLIB_H */ Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c (nonexistent) @@ -1,149 +0,0 @@ -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#define ZLIB_INTERNAL -#include "zlib.h" - -#define BASE 65521UL /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); - -/* use NO_DIVIDE if your processor does not do division in hardware */ -#ifdef NO_DIVIDE -# define MOD(a) \ - do { \ - if (a >= (BASE << 16)) a -= (BASE << 16); \ - if (a >= (BASE << 15)) a -= (BASE << 15); \ - if (a >= (BASE << 14)) a -= (BASE << 14); \ - if (a >= (BASE << 13)) a -= (BASE << 13); \ - if (a >= (BASE << 12)) a -= (BASE << 12); \ - if (a >= (BASE << 11)) a -= (BASE << 11); \ - if (a >= (BASE << 10)) a -= (BASE << 10); \ - if (a >= (BASE << 9)) a -= (BASE << 9); \ - if (a >= (BASE << 8)) a -= (BASE << 8); \ - if (a >= (BASE << 7)) a -= (BASE << 7); \ - if (a >= (BASE << 6)) a -= (BASE << 6); \ - if (a >= (BASE << 5)) a -= (BASE << 5); \ - if (a >= (BASE << 4)) a -= (BASE << 4); \ - if (a >= (BASE << 3)) a -= (BASE << 3); \ - if (a >= (BASE << 2)) a -= (BASE << 2); \ - if (a >= (BASE << 1)) a -= (BASE << 1); \ - if (a >= BASE) a -= BASE; \ - } while (0) -# define MOD4(a) \ - do { \ - if (a >= (BASE << 4)) a -= (BASE << 4); \ - if (a >= (BASE << 3)) a -= (BASE << 3); \ - if (a >= (BASE << 2)) a -= (BASE << 2); \ - if (a >= (BASE << 1)) a -= (BASE << 1); \ - if (a >= BASE) a -= BASE; \ - } while (0) -#else -# define MOD(a) a %= BASE -# define MOD4(a) a %= BASE -#endif - -/* ========================================================================= */ -uLong ZEXPORT adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; -{ - unsigned long sum2; - unsigned n; - - /* split Adler-32 into component sums */ - sum2 = (adler >> 16) & 0xffff; - adler &= 0xffff; - - /* in case user likes doing a byte at a time, keep it fast */ - if (len == 1) { - adler += buf[0]; - if (adler >= BASE) - adler -= BASE; - sum2 += adler; - if (sum2 >= BASE) - sum2 -= BASE; - return adler | (sum2 << 16); - } - - /* initial Adler-32 value (deferred check for len == 1 speed) */ - if (buf == Z_NULL) - return 1L; - - /* in case short lengths are provided, keep it somewhat fast */ - if (len < 16) { - while (len--) { - adler += *buf++; - sum2 += adler; - } - if (adler >= BASE) - adler -= BASE; - MOD4(sum2); /* only added so many BASE's */ - return adler | (sum2 << 16); - } - - /* do length NMAX blocks -- requires just one modulo operation */ - while (len >= NMAX) { - len -= NMAX; - n = NMAX / 16; /* NMAX is divisible by 16 */ - do { - DO16(buf); /* 16 sums unrolled */ - buf += 16; - } while (--n); - MOD(adler); - MOD(sum2); - } - - /* do remaining bytes (less than NMAX, still just one modulo) */ - if (len) { /* avoid modulos if none remaining */ - while (len >= 16) { - len -= 16; - DO16(buf); - buf += 16; - } - while (len--) { - adler += *buf++; - sum2 += adler; - } - MOD(adler); - MOD(sum2); - } - - /* return recombined sums */ - return adler | (sum2 << 16); -} - -/* ========================================================================= */ -uLong ZEXPORT adler32_combine(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off_t len2; -{ - unsigned long sum1; - unsigned long sum2; - unsigned rem; - - /* the derivation of this formula is left as an exercise for the reader */ - rem = (unsigned)(len2 % BASE); - sum1 = adler1 & 0xffff; - sum2 = rem * sum1; - MOD(sum2); - sum1 += (adler2 & 0xffff) + BASE - 1; - sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; - if (sum1 > BASE) sum1 -= BASE; - if (sum1 > BASE) sum1 -= BASE; - if (sum2 > (BASE << 1)) sum2 -= (BASE << 1); - if (sum2 > BASE) sum2 -= BASE; - return sum1 | (sum2 << 16); -} Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c (nonexistent) @@ -1,1219 +0,0 @@ -/* trees.c -- output deflated data using Huffman coding - * Copyright (C) 1995-2005 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* - * ALGORITHM - * - * The "deflation" process uses several Huffman trees. The more - * common source values are represented by shorter bit sequences. - * - * Each code tree is stored in a compressed form which is itself - * a Huffman encoding of the lengths of all the code strings (in - * ascending order by source values). The actual code strings are - * reconstructed from the lengths in the inflate process, as described - * in the deflate specification. - * - * REFERENCES - * - * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". - * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc - * - * Storer, James A. - * Data Compression: Methods and Theory, pp. 49-50. - * Computer Science Press, 1988. ISBN 0-7167-8156-5. - * - * Sedgewick, R. - * Algorithms, p290. - * Addison-Wesley, 1983. ISBN 0-201-06672-6. - */ - -/* #define GEN_TREES_H */ - -#include "deflate.h" - -#ifdef DEBUG -# include -#endif - -/* =========================================================================== - * Constants - */ - -#define MAX_BL_BITS 7 -/* Bit length codes must not exceed MAX_BL_BITS bits */ - -#define END_BLOCK 256 -/* end of block literal code */ - -#define REP_3_6 16 -/* repeat previous bit length 3-6 times (2 bits of repeat count) */ - -#define REPZ_3_10 17 -/* repeat a zero length 3-10 times (3 bits of repeat count) */ - -#define REPZ_11_138 18 -/* repeat a zero length 11-138 times (7 bits of repeat count) */ - -local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ - = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; - -local const int extra_dbits[D_CODES] /* extra bits for each distance code */ - = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; - -local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ - = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; - -local const uch bl_order[BL_CODES] - = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; -/* The lengths of the bit length codes are sent in order of decreasing - * probability, to avoid transmitting the lengths for unused bit length codes. - */ - -#define Buf_size (8 * 2*sizeof(char)) -/* Number of bits used within bi_buf. (bi_buf might be implemented on - * more than 16 bits on some systems.) - */ - -/* =========================================================================== - * Local data. These are initialized only once. - */ - -#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ - -#if defined(GEN_TREES_H) || !defined(STDC) -/* non ANSI compilers may not accept trees.h */ - -local ct_data static_ltree[L_CODES+2]; -/* The static literal tree. Since the bit lengths are imposed, there is no - * need for the L_CODES extra codes used during heap construction. However - * The codes 286 and 287 are needed to build a canonical tree (see _tr_init - * below). - */ - -local ct_data static_dtree[D_CODES]; -/* The static distance tree. (Actually a trivial tree since all codes use - * 5 bits.) - */ - -uch _dist_code[DIST_CODE_LEN]; -/* Distance codes. The first 256 values correspond to the distances - * 3 .. 258, the last 256 values correspond to the top 8 bits of - * the 15 bit distances. - */ - -uch _length_code[MAX_MATCH-MIN_MATCH+1]; -/* length code for each normalized match length (0 == MIN_MATCH) */ - -local int base_length[LENGTH_CODES]; -/* First normalized length for each code (0 = MIN_MATCH) */ - -local int base_dist[D_CODES]; -/* First normalized distance for each code (0 = distance of 1) */ - -#else -# include "trees.h" -#endif /* GEN_TREES_H */ - -struct static_tree_desc_s { - const ct_data *static_tree; /* static tree or NULL */ - const intf *extra_bits; /* extra bits for each code or NULL */ - int extra_base; /* base index for extra_bits */ - int elems; /* max number of elements in the tree */ - int max_length; /* max bit length for the codes */ -}; - -local static_tree_desc static_l_desc = -{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; - -local static_tree_desc static_d_desc = -{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; - -local static_tree_desc static_bl_desc = -{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; - -/* =========================================================================== - * Local (static) routines in this file. - */ - -local void tr_static_init OF((void)); -local void init_block OF((deflate_state *s)); -local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); -local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); -local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); -local void build_tree OF((deflate_state *s, tree_desc *desc)); -local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local int build_bl_tree OF((deflate_state *s)); -local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, - int blcodes)); -local void compress_block OF((deflate_state *s, ct_data *ltree, - ct_data *dtree)); -local void set_data_type OF((deflate_state *s)); -local unsigned bi_reverse OF((unsigned value, int length)); -local void bi_windup OF((deflate_state *s)); -local void bi_flush OF((deflate_state *s)); -local void copy_block OF((deflate_state *s, charf *buf, unsigned len, - int header)); - -#ifdef GEN_TREES_H -local void gen_trees_header OF((void)); -#endif - -#ifndef DEBUG -# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) - /* Send a code of the given tree. c and tree must not have side effects */ - -#else /* DEBUG */ -# define send_code(s, c, tree) \ - { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ - send_bits(s, tree[c].Code, tree[c].Len); } -#endif - -/* =========================================================================== - * Output a short LSB first on the stream. - * IN assertion: there is enough room in pendingBuf. - */ -#define put_short(s, w) { \ - put_byte(s, (uch)((w) & 0xff)); \ - put_byte(s, (uch)((ush)(w) >> 8)); \ -} - -/* =========================================================================== - * Send a value on a given number of bits. - * IN assertion: length <= 16 and value fits in length bits. - */ -#ifdef DEBUG -local void send_bits OF((deflate_state *s, int value, int length)); - -local void send_bits(s, value, length) - deflate_state *s; - int value; /* value to send */ - int length; /* number of bits */ -{ - Tracevv((stderr," l %2d v %4x ", length, value)); - Assert(length > 0 && length <= 15, "invalid length"); - s->bits_sent += (ulg)length; - - /* If not enough room in bi_buf, use (valid) bits from bi_buf and - * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) - * unused bits in value. - */ - if (s->bi_valid > (int)Buf_size - length) { - s->bi_buf |= (value << s->bi_valid); - put_short(s, s->bi_buf); - s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); - s->bi_valid += length - Buf_size; - } else { - s->bi_buf |= value << s->bi_valid; - s->bi_valid += length; - } -} -#else /* !DEBUG */ - -#define send_bits(s, value, length) \ -{ int len = length;\ - if (s->bi_valid > (int)Buf_size - len) {\ - int val = value;\ - s->bi_buf |= (val << s->bi_valid);\ - put_short(s, s->bi_buf);\ - s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ - s->bi_valid += len - Buf_size;\ - } else {\ - s->bi_buf |= (value) << s->bi_valid;\ - s->bi_valid += len;\ - }\ -} -#endif /* DEBUG */ - - -/* the arguments must not have side effects */ - -/* =========================================================================== - * Initialize the various 'constant' tables. - */ -local void tr_static_init() -{ -#if defined(GEN_TREES_H) || !defined(STDC) - static int static_init_done = 0; - int n; /* iterates over tree elements */ - int bits; /* bit counter */ - int length; /* length value */ - int code; /* code value */ - int dist; /* distance index */ - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - if (static_init_done) return; - - /* For some embedded targets, global variables are not initialized: */ - static_l_desc.static_tree = static_ltree; - static_l_desc.extra_bits = extra_lbits; - static_d_desc.static_tree = static_dtree; - static_d_desc.extra_bits = extra_dbits; - static_bl_desc.extra_bits = extra_blbits; - - /* Initialize the mapping length (0..255) -> length code (0..28) */ - length = 0; - for (code = 0; code < LENGTH_CODES-1; code++) { - base_length[code] = length; - for (n = 0; n < (1< dist code (0..29) */ - dist = 0; - for (code = 0 ; code < 16; code++) { - base_dist[code] = dist; - for (n = 0; n < (1<>= 7; /* from now on, all distances are divided by 128 */ - for ( ; code < D_CODES; code++) { - base_dist[code] = dist << 7; - for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { - _dist_code[256 + dist++] = (uch)code; - } - } - Assert (dist == 256, "tr_static_init: 256+dist != 512"); - - /* Construct the codes of the static literal tree */ - for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; - n = 0; - while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; - while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; - while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; - while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; - /* Codes 286 and 287 do not exist, but we must include them in the - * tree construction to get a canonical Huffman tree (longest code - * all ones) - */ - gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); - - /* The static distance tree is trivial: */ - for (n = 0; n < D_CODES; n++) { - static_dtree[n].Len = 5; - static_dtree[n].Code = bi_reverse((unsigned)n, 5); - } - static_init_done = 1; - -# ifdef GEN_TREES_H - gen_trees_header(); -# endif -#endif /* defined(GEN_TREES_H) || !defined(STDC) */ -} - -/* =========================================================================== - * Genererate the file trees.h describing the static trees. - */ -#ifdef GEN_TREES_H -# ifndef DEBUG -# include -# endif - -# define SEPARATOR(i, last, width) \ - ((i) == (last)? "\n};\n\n" : \ - ((i) % (width) == (width)-1 ? ",\n" : ", ")) - -void gen_trees_header() -{ - FILE *header = fopen("trees.h", "w"); - int i; - - Assert (header != NULL, "Can't open trees.h"); - fprintf(header, - "/* header created automatically with -DGEN_TREES_H */\n\n"); - - fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); - for (i = 0; i < L_CODES+2; i++) { - fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, - static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); - } - - fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); - for (i = 0; i < D_CODES; i++) { - fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, - static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); - } - - fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n"); - for (i = 0; i < DIST_CODE_LEN; i++) { - fprintf(header, "%2u%s", _dist_code[i], - SEPARATOR(i, DIST_CODE_LEN-1, 20)); - } - - fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); - for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { - fprintf(header, "%2u%s", _length_code[i], - SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); - } - - fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); - for (i = 0; i < LENGTH_CODES; i++) { - fprintf(header, "%1u%s", base_length[i], - SEPARATOR(i, LENGTH_CODES-1, 20)); - } - - fprintf(header, "local const int base_dist[D_CODES] = {\n"); - for (i = 0; i < D_CODES; i++) { - fprintf(header, "%5u%s", base_dist[i], - SEPARATOR(i, D_CODES-1, 10)); - } - - fclose(header); -} -#endif /* GEN_TREES_H */ - -/* =========================================================================== - * Initialize the tree data structures for a new zlib stream. - */ -void _tr_init(s) - deflate_state *s; -{ - tr_static_init(); - - s->l_desc.dyn_tree = s->dyn_ltree; - s->l_desc.stat_desc = &static_l_desc; - - s->d_desc.dyn_tree = s->dyn_dtree; - s->d_desc.stat_desc = &static_d_desc; - - s->bl_desc.dyn_tree = s->bl_tree; - s->bl_desc.stat_desc = &static_bl_desc; - - s->bi_buf = 0; - s->bi_valid = 0; - s->last_eob_len = 8; /* enough lookahead for inflate */ -#ifdef DEBUG - s->compressed_len = 0L; - s->bits_sent = 0L; -#endif - - /* Initialize the first block of the first file: */ - init_block(s); -} - -/* =========================================================================== - * Initialize a new block. - */ -local void init_block(s) - deflate_state *s; -{ - int n; /* iterates over tree elements */ - - /* Initialize the trees. */ - for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; - for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; - for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; - - s->dyn_ltree[END_BLOCK].Freq = 1; - s->opt_len = s->static_len = 0L; - s->last_lit = s->matches = 0; -} - -#define SMALLEST 1 -/* Index within the heap array of least frequent node in the Huffman tree */ - - -/* =========================================================================== - * Remove the smallest element from the heap and recreate the heap with - * one less element. Updates heap and heap_len. - */ -#define pqremove(s, tree, top) \ -{\ - top = s->heap[SMALLEST]; \ - s->heap[SMALLEST] = s->heap[s->heap_len--]; \ - pqdownheap(s, tree, SMALLEST); \ -} - -/* =========================================================================== - * Compares to subtrees, using the tree depth as tie breaker when - * the subtrees have equal frequency. This minimizes the worst case length. - */ -#define smaller(tree, n, m, depth) \ - (tree[n].Freq < tree[m].Freq || \ - (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) - -/* =========================================================================== - * Restore the heap property by moving down the tree starting at node k, - * exchanging a node with the smallest of its two sons if necessary, stopping - * when the heap property is re-established (each father smaller than its - * two sons). - */ -local void pqdownheap(s, tree, k) - deflate_state *s; - ct_data *tree; /* the tree to restore */ - int k; /* node to move down */ -{ - int v = s->heap[k]; - int j = k << 1; /* left son of k */ - while (j <= s->heap_len) { - /* Set j to the smallest of the two sons: */ - if (j < s->heap_len && - smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { - j++; - } - /* Exit if v is smaller than both sons */ - if (smaller(tree, v, s->heap[j], s->depth)) break; - - /* Exchange v with the smallest son */ - s->heap[k] = s->heap[j]; k = j; - - /* And continue down the tree, setting j to the left son of k */ - j <<= 1; - } - s->heap[k] = v; -} - -/* =========================================================================== - * Compute the optimal bit lengths for a tree and update the total bit length - * for the current block. - * IN assertion: the fields freq and dad are set, heap[heap_max] and - * above are the tree nodes sorted by increasing frequency. - * OUT assertions: the field len is set to the optimal bit length, the - * array bl_count contains the frequencies for each bit length. - * The length opt_len is updated; static_len is also updated if stree is - * not null. - */ -local void gen_bitlen(s, desc) - deflate_state *s; - tree_desc *desc; /* the tree descriptor */ -{ - ct_data *tree = desc->dyn_tree; - int max_code = desc->max_code; - const ct_data *stree = desc->stat_desc->static_tree; - const intf *extra = desc->stat_desc->extra_bits; - int base = desc->stat_desc->extra_base; - int max_length = desc->stat_desc->max_length; - int h; /* heap index */ - int n, m; /* iterate over the tree elements */ - int bits; /* bit length */ - int xbits; /* extra bits */ - ush f; /* frequency */ - int overflow = 0; /* number of elements with bit length too large */ - - for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; - - /* In a first pass, compute the optimal bit lengths (which may - * overflow in the case of the bit length tree). - */ - tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ - - for (h = s->heap_max+1; h < HEAP_SIZE; h++) { - n = s->heap[h]; - bits = tree[tree[n].Dad].Len + 1; - if (bits > max_length) bits = max_length, overflow++; - tree[n].Len = (ush)bits; - /* We overwrite tree[n].Dad which is no longer needed */ - - if (n > max_code) continue; /* not a leaf node */ - - s->bl_count[bits]++; - xbits = 0; - if (n >= base) xbits = extra[n-base]; - f = tree[n].Freq; - s->opt_len += (ulg)f * (bits + xbits); - if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); - } - if (overflow == 0) return; - - Trace((stderr,"\nbit length overflow\n")); - /* This happens for example on obj2 and pic of the Calgary corpus */ - - /* Find the first bit length which could increase: */ - do { - bits = max_length-1; - while (s->bl_count[bits] == 0) bits--; - s->bl_count[bits]--; /* move one leaf down the tree */ - s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ - s->bl_count[max_length]--; - /* The brother of the overflow item also moves one step up, - * but this does not affect bl_count[max_length] - */ - overflow -= 2; - } while (overflow > 0); - - /* Now recompute all bit lengths, scanning in increasing frequency. - * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all - * lengths instead of fixing only the wrong ones. This idea is taken - * from 'ar' written by Haruhiko Okumura.) - */ - for (bits = max_length; bits != 0; bits--) { - n = s->bl_count[bits]; - while (n != 0) { - m = s->heap[--h]; - if (m > max_code) continue; - if ((unsigned) tree[m].Len != (unsigned) bits) { - Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); - s->opt_len += ((long)bits - (long)tree[m].Len) - *(long)tree[m].Freq; - tree[m].Len = (ush)bits; - } - n--; - } - } -} - -/* =========================================================================== - * Generate the codes for a given tree and bit counts (which need not be - * optimal). - * IN assertion: the array bl_count contains the bit length statistics for - * the given tree and the field len is set for all tree elements. - * OUT assertion: the field code is set for all tree elements of non - * zero code length. - */ -local void gen_codes (tree, max_code, bl_count) - ct_data *tree; /* the tree to decorate */ - int max_code; /* largest code with non zero frequency */ - ushf *bl_count; /* number of codes at each bit length */ -{ - ush next_code[MAX_BITS+1]; /* next code value for each bit length */ - ush code = 0; /* running code value */ - int bits; /* bit index */ - int n; /* code index */ - - /* The distribution counts are first used to generate the code values - * without bit reversal. - */ - for (bits = 1; bits <= MAX_BITS; bits++) { - next_code[bits] = code = (code + bl_count[bits-1]) << 1; - } - /* Check that the bit counts in bl_count are consistent. The last code - * must be all ones. - */ - Assert (code + bl_count[MAX_BITS]-1 == (1<dyn_tree; - const ct_data *stree = desc->stat_desc->static_tree; - int elems = desc->stat_desc->elems; - int n, m; /* iterate over heap elements */ - int max_code = -1; /* largest code with non zero frequency */ - int node; /* new node being created */ - - /* Construct the initial heap, with least frequent element in - * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. - * heap[0] is not used. - */ - s->heap_len = 0, s->heap_max = HEAP_SIZE; - - for (n = 0; n < elems; n++) { - if (tree[n].Freq != 0) { - s->heap[++(s->heap_len)] = max_code = n; - s->depth[n] = 0; - } else { - tree[n].Len = 0; - } - } - - /* The pkzip format requires that at least one distance code exists, - * and that at least one bit should be sent even if there is only one - * possible code. So to avoid special checks later on we force at least - * two codes of non zero frequency. - */ - while (s->heap_len < 2) { - node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); - tree[node].Freq = 1; - s->depth[node] = 0; - s->opt_len--; if (stree) s->static_len -= stree[node].Len; - /* node is 0 or 1 so it does not have extra bits */ - } - desc->max_code = max_code; - - /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, - * establish sub-heaps of increasing lengths: - */ - for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); - - /* Construct the Huffman tree by repeatedly combining the least two - * frequent nodes. - */ - node = elems; /* next internal node of the tree */ - do { - pqremove(s, tree, n); /* n = node of least frequency */ - m = s->heap[SMALLEST]; /* m = node of next least frequency */ - - s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ - s->heap[--(s->heap_max)] = m; - - /* Create a new node father of n and m */ - tree[node].Freq = tree[n].Freq + tree[m].Freq; - s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ? - s->depth[n] : s->depth[m]) + 1); - tree[n].Dad = tree[m].Dad = (ush)node; -#ifdef DUMP_BL_TREE - if (tree == s->bl_tree) { - fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", - node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); - } -#endif - /* and insert the new node in the heap */ - s->heap[SMALLEST] = node++; - pqdownheap(s, tree, SMALLEST); - - } while (s->heap_len >= 2); - - s->heap[--(s->heap_max)] = s->heap[SMALLEST]; - - /* At this point, the fields freq and dad are set. We can now - * generate the bit lengths. - */ - gen_bitlen(s, (tree_desc *)desc); - - /* The field len is now set, we can generate the bit codes */ - gen_codes ((ct_data *)tree, max_code, s->bl_count); -} - -/* =========================================================================== - * Scan a literal or distance tree to determine the frequencies of the codes - * in the bit length tree. - */ -local void scan_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - if (nextlen == 0) max_count = 138, min_count = 3; - tree[max_code+1].Len = (ush)0xffff; /* guard */ - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - s->bl_tree[curlen].Freq += count; - } else if (curlen != 0) { - if (curlen != prevlen) s->bl_tree[curlen].Freq++; - s->bl_tree[REP_3_6].Freq++; - } else if (count <= 10) { - s->bl_tree[REPZ_3_10].Freq++; - } else { - s->bl_tree[REPZ_11_138].Freq++; - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Send a literal or distance tree in compressed form, using the codes in - * bl_tree. - */ -local void send_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - /* tree[max_code+1].Len = -1; */ /* guard already set */ - if (nextlen == 0) max_count = 138, min_count = 3; - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - do { send_code(s, curlen, s->bl_tree); } while (--count != 0); - - } else if (curlen != 0) { - if (curlen != prevlen) { - send_code(s, curlen, s->bl_tree); count--; - } - Assert(count >= 3 && count <= 6, " 3_6?"); - send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); - - } else if (count <= 10) { - send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); - - } else { - send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Construct the Huffman tree for the bit lengths and return the index in - * bl_order of the last bit length code to send. - */ -local int build_bl_tree(s) - deflate_state *s; -{ - int max_blindex; /* index of last bit length code of non zero freq */ - - /* Determine the bit length frequencies for literal and distance trees */ - scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); - scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); - - /* Build the bit length tree: */ - build_tree(s, (tree_desc *)(&(s->bl_desc))); - /* opt_len now includes the length of the tree representations, except - * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. - */ - - /* Determine the number of bit length codes to send. The pkzip format - * requires that at least 4 bit length codes be sent. (appnote.txt says - * 3 but the actual value used is 4.) - */ - for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { - if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; - } - /* Update opt_len to include the bit length tree and counts */ - s->opt_len += 3*(max_blindex+1) + 5+5+4; - Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", - s->opt_len, s->static_len)); - - return max_blindex; -} - -/* =========================================================================== - * Send the header for a block using dynamic Huffman trees: the counts, the - * lengths of the bit length codes, the literal tree and the distance tree. - * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. - */ -local void send_all_trees(s, lcodes, dcodes, blcodes) - deflate_state *s; - int lcodes, dcodes, blcodes; /* number of codes for each tree */ -{ - int rank; /* index in bl_order */ - - Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); - Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, - "too many codes"); - Tracev((stderr, "\nbl counts: ")); - send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ - send_bits(s, dcodes-1, 5); - send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ - for (rank = 0; rank < blcodes; rank++) { - Tracev((stderr, "\nbl code %2d ", bl_order[rank])); - send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); - } - Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ - Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ - Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); -} - -/* =========================================================================== - * Send a stored block - */ -void _tr_stored_block(s, buf, stored_len, eof) - deflate_state *s; - charf *buf; /* input block */ - ulg stored_len; /* length of input block */ - int eof; /* true if this is the last block for a file */ -{ - send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */ -#ifdef DEBUG - s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; - s->compressed_len += (stored_len + 4) << 3; -#endif - copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ -} - -/* =========================================================================== - * Send one empty static block to give enough lookahead for inflate. - * This takes 10 bits, of which 7 may remain in the bit buffer. - * The current inflate code requires 9 bits of lookahead. If the - * last two codes for the previous block (real code plus EOB) were coded - * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode - * the last real code. In this case we send two empty static blocks instead - * of one. (There are no problems if the previous block is stored or fixed.) - * To simplify the code, we assume the worst case of last real code encoded - * on one bit only. - */ -void _tr_align(s) - deflate_state *s; -{ - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); -#ifdef DEBUG - s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ -#endif - bi_flush(s); - /* Of the 10 bits for the empty block, we have already sent - * (10 - bi_valid) bits. The lookahead for the last real code (before - * the EOB of the previous block) was thus at least one plus the length - * of the EOB plus what we have just sent of the empty static block. - */ - if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); -#ifdef DEBUG - s->compressed_len += 10L; -#endif - bi_flush(s); - } - s->last_eob_len = 7; -} - -/* =========================================================================== - * Determine the best encoding for the current block: dynamic trees, static - * trees or store, and output the encoded block to the zip file. - */ -void _tr_flush_block(s, buf, stored_len, eof) - deflate_state *s; - charf *buf; /* input block, or NULL if too old */ - ulg stored_len; /* length of input block */ - int eof; /* true if this is the last block for a file */ -{ - ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ - int max_blindex = 0; /* index of last bit length code of non zero freq */ - - /* Build the Huffman trees unless a stored block is forced */ - if (s->level > 0) { - - /* Check if the file is binary or text */ - if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN) - set_data_type(s); - - /* Construct the literal and distance trees */ - build_tree(s, (tree_desc *)(&(s->l_desc))); - Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - - build_tree(s, (tree_desc *)(&(s->d_desc))); - Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - /* At this point, opt_len and static_len are the total bit lengths of - * the compressed block data, excluding the tree representations. - */ - - /* Build the bit length tree for the above two trees, and get the index - * in bl_order of the last bit length code to send. - */ - max_blindex = build_bl_tree(s); - - /* Determine the best encoding. Compute the block lengths in bytes. */ - opt_lenb = (s->opt_len+3+7)>>3; - static_lenb = (s->static_len+3+7)>>3; - - Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", - opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, - s->last_lit)); - - if (static_lenb <= opt_lenb) opt_lenb = static_lenb; - - } else { - Assert(buf != (char*)0, "lost buf"); - opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ - } - -#ifdef FORCE_STORED - if (buf != (char*)0) { /* force stored block */ -#else - if (stored_len+4 <= opt_lenb && buf != (char*)0) { - /* 4: two words for the lengths */ -#endif - /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. - * Otherwise we can't have processed more than WSIZE input bytes since - * the last block flush, because compression would have been - * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to - * transform a block into a stored block. - */ - _tr_stored_block(s, buf, stored_len, eof); - -#ifdef FORCE_STATIC - } else if (static_lenb >= 0) { /* force static trees */ -#else - } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { -#endif - send_bits(s, (STATIC_TREES<<1)+eof, 3); - compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); -#ifdef DEBUG - s->compressed_len += 3 + s->static_len; -#endif - } else { - send_bits(s, (DYN_TREES<<1)+eof, 3); - send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, - max_blindex+1); - compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); -#ifdef DEBUG - s->compressed_len += 3 + s->opt_len; -#endif - } - Assert (s->compressed_len == s->bits_sent, "bad compressed size"); - /* The above check is made mod 2^32, for files larger than 512 MB - * and uLong implemented on 32 bits. - */ - init_block(s); - - if (eof) { - bi_windup(s); -#ifdef DEBUG - s->compressed_len += 7; /* align on byte boundary */ -#endif - } - Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, - s->compressed_len-7*eof)); -} - -/* =========================================================================== - * Save the match info and tally the frequency counts. Return true if - * the current block must be flushed. - */ -int _tr_tally (s, dist, lc) - deflate_state *s; - unsigned dist; /* distance of matched string */ - unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ -{ - s->d_buf[s->last_lit] = (ush)dist; - s->l_buf[s->last_lit++] = (uch)lc; - if (dist == 0) { - /* lc is the unmatched char */ - s->dyn_ltree[lc].Freq++; - } else { - s->matches++; - /* Here, lc is the match length - MIN_MATCH */ - dist--; /* dist = match distance - 1 */ - Assert((ush)dist < (ush)MAX_DIST(s) && - (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && - (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); - - s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; - s->dyn_dtree[d_code(dist)].Freq++; - } - -#ifdef TRUNCATE_BLOCK - /* Try to guess if it is profitable to stop the current block here */ - if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { - /* Compute an upper bound for the compressed length */ - ulg out_length = (ulg)s->last_lit*8L; - ulg in_length = (ulg)((long)s->strstart - s->block_start); - int dcode; - for (dcode = 0; dcode < D_CODES; dcode++) { - out_length += (ulg)s->dyn_dtree[dcode].Freq * - (5L+extra_dbits[dcode]); - } - out_length >>= 3; - Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", - s->last_lit, in_length, out_length, - 100L - out_length*100L/in_length)); - if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; - } -#endif - return (s->last_lit == s->lit_bufsize-1); - /* We avoid equality with lit_bufsize because of wraparound at 64K - * on 16 bit machines and because stored blocks are restricted to - * 64K-1 bytes. - */ -} - -/* =========================================================================== - * Send the block data compressed using the given Huffman trees - */ -local void compress_block(s, ltree, dtree) - deflate_state *s; - ct_data *ltree; /* literal tree */ - ct_data *dtree; /* distance tree */ -{ - unsigned dist; /* distance of matched string */ - int lc; /* match length or unmatched char (if dist == 0) */ - unsigned lx = 0; /* running index in l_buf */ - unsigned code; /* the code to send */ - int extra; /* number of extra bits to send */ - - if (s->last_lit != 0) do { - dist = s->d_buf[lx]; - lc = s->l_buf[lx++]; - if (dist == 0) { - send_code(s, lc, ltree); /* send a literal byte */ - Tracecv(isgraph(lc), (stderr," '%c' ", lc)); - } else { - /* Here, lc is the match length - MIN_MATCH */ - code = _length_code[lc]; - send_code(s, code+LITERALS+1, ltree); /* send the length code */ - extra = extra_lbits[code]; - if (extra != 0) { - lc -= base_length[code]; - send_bits(s, lc, extra); /* send the extra length bits */ - } - dist--; /* dist is now the match distance - 1 */ - code = d_code(dist); - Assert (code < D_CODES, "bad d_code"); - - send_code(s, code, dtree); /* send the distance code */ - extra = extra_dbits[code]; - if (extra != 0) { - dist -= base_dist[code]; - send_bits(s, dist, extra); /* send the extra distance bits */ - } - } /* literal or match pair ? */ - - /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ - Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx, - "pendingBuf overflow"); - - } while (lx < s->last_lit); - - send_code(s, END_BLOCK, ltree); - s->last_eob_len = ltree[END_BLOCK].Len; -} - -/* =========================================================================== - * Set the data type to BINARY or TEXT, using a crude approximation: - * set it to Z_TEXT if all symbols are either printable characters (33 to 255) - * or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise. - * IN assertion: the fields Freq of dyn_ltree are set. - */ -local void set_data_type(s) - deflate_state *s; -{ - int n; - - for (n = 0; n < 9; n++) - if (s->dyn_ltree[n].Freq != 0) - break; - if (n == 9) - for (n = 14; n < 32; n++) - if (s->dyn_ltree[n].Freq != 0) - break; - s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY; -} - -/* =========================================================================== - * Reverse the first len bits of a code, using straightforward code (a faster - * method would use a table) - * IN assertion: 1 <= len <= 15 - */ -local unsigned bi_reverse(code, len) - unsigned code; /* the value to invert */ - int len; /* its bit length */ -{ - register unsigned res = 0; - do { - res |= code & 1; - code >>= 1, res <<= 1; - } while (--len > 0); - return res >> 1; -} - -/* =========================================================================== - * Flush the bit buffer, keeping at most 7 bits in it. - */ -local void bi_flush(s) - deflate_state *s; -{ - if (s->bi_valid == 16) { - put_short(s, s->bi_buf); - s->bi_buf = 0; - s->bi_valid = 0; - } else if (s->bi_valid >= 8) { - put_byte(s, (Byte)s->bi_buf); - s->bi_buf >>= 8; - s->bi_valid -= 8; - } -} - -/* =========================================================================== - * Flush the bit buffer and align the output on a byte boundary - */ -local void bi_windup(s) - deflate_state *s; -{ - if (s->bi_valid > 8) { - put_short(s, s->bi_buf); - } else if (s->bi_valid > 0) { - put_byte(s, (Byte)s->bi_buf); - } - s->bi_buf = 0; - s->bi_valid = 0; -#ifdef DEBUG - s->bits_sent = (s->bits_sent+7) & ~7; -#endif -} - -/* =========================================================================== - * Copy a stored block, storing first the length and its - * one's complement if requested. - */ -local void copy_block(s, buf, len, header) - deflate_state *s; - charf *buf; /* the input data */ - unsigned len; /* its length */ - int header; /* true if block header must be written */ -{ - bi_windup(s); /* align on byte boundary */ - s->last_eob_len = 8; /* enough lookahead for inflate */ - - if (header) { - put_short(s, (ush)len); - put_short(s, (ush)~len); -#ifdef DEBUG - s->bits_sent += 2*16; -#endif - } -#ifdef DEBUG - s->bits_sent += (ulg)len<<3; -#endif - while (len--) { - put_byte(s, *buf++); - } -} Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c (nonexistent) @@ -1,428 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - * - * Thanks to Rodney Brown for his contribution of faster - * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing - * tables for updating the shift register in one step with three exclusive-ors - * instead of four steps with four exclusive-ors. This results in about a - * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* - Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore - protection on the static variables used to control the first-use generation - of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should - first call get_crc_table() to initialize the tables before allowing more than - one thread to use crc32(). - */ - -#ifdef MAKECRCH -# include -# ifndef DYNAMIC_CRC_TABLE -# define DYNAMIC_CRC_TABLE -# endif /* !DYNAMIC_CRC_TABLE */ -#endif /* MAKECRCH */ - -#include "zutil.h" /* for STDC and FAR definitions */ - -#define local static - -/* Find a four-byte integer type for crc32_little() and crc32_big(). */ -#ifndef NOBYFOUR -# ifdef STDC /* need ANSI C limits.h to determine sizes */ -# include -# define BYFOUR -# if (UINT_MAX == 0xffffffffUL) - typedef unsigned int u4; -# else -# if (ULONG_MAX == 0xffffffffUL) - typedef unsigned long u4; -# else -# if (USHRT_MAX == 0xffffffffUL) - typedef unsigned short u4; -# else -# undef BYFOUR /* can't find a four-byte integer type! */ -# endif -# endif -# endif -# endif /* STDC */ -#endif /* !NOBYFOUR */ - -/* Definitions for doing the crc four data bytes at a time. */ -#ifdef BYFOUR -# define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \ - (((w)&0xff00)<<8)+(((w)&0xff)<<24)) - local unsigned long crc32_little OF((unsigned long, - const unsigned char FAR *, unsigned)); - local unsigned long crc32_big OF((unsigned long, - const unsigned char FAR *, unsigned)); -# define TBLS 8 -#else -# define TBLS 1 -#endif /* BYFOUR */ - -/* Local functions for crc concatenation */ -local unsigned long gf2_matrix_times OF((unsigned long *mat, - unsigned long vec)); -local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); - -#ifdef DYNAMIC_CRC_TABLE - -local volatile int crc_table_empty = 1; -local unsigned long FAR crc_table[TBLS][256]; -local void make_crc_table OF((void)); -#ifdef MAKECRCH - local void write_table OF((FILE *, const unsigned long FAR *)); -#endif /* MAKECRCH */ -/* - Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: - x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. - - Polynomials over GF(2) are represented in binary, one bit per coefficient, - with the lowest powers in the most significant bit. Then adding polynomials - is just exclusive-or, and multiplying a polynomial by x is a right shift by - one. If we call the above polynomial p, and represent a byte as the - polynomial q, also with the lowest power in the most significant bit (so the - byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, - where a mod b means the remainder after dividing a by b. - - This calculation is done using the shift-register method of multiplying and - taking the remainder. The register is initialized to zero, and for each - incoming bit, x^32 is added mod p to the register if the bit is a one (where - x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by - x (which is shifting right by one and adding x^32 mod p if the bit shifted - out is a one). We start with the highest power (least significant bit) of - q and repeat for all eight bits of q. - - The first table is simply the CRC of all possible eight bit values. This is - all the information needed to generate CRCs on data a byte at a time for all - combinations of CRC register values and incoming bytes. The remaining tables - allow for word-at-a-time CRC calculation for both big-endian and little- - endian machines, where a word is four bytes. -*/ -local void make_crc_table() -{ - unsigned long c; - int n, k; - unsigned long poly; /* polynomial exclusive-or pattern */ - /* terms of polynomial defining this crc (except x^32): */ - static volatile int first = 1; /* flag to limit concurrent making */ - static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - - /* See if another task is already doing this (not thread-safe, but better - than nothing -- significantly reduces duration of vulnerability in - case the advice about DYNAMIC_CRC_TABLE is ignored) */ - if (first) { - first = 0; - - /* make exclusive-or pattern from polynomial (0xedb88320UL) */ - poly = 0UL; - for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++) - poly |= 1UL << (31 - p[n]); - - /* generate a crc for every 8-bit value */ - for (n = 0; n < 256; n++) { - c = (unsigned long)n; - for (k = 0; k < 8; k++) - c = c & 1 ? poly ^ (c >> 1) : c >> 1; - crc_table[0][n] = c; - } - -#ifdef BYFOUR - /* generate crc for each value followed by one, two, and three zeros, - and then the byte reversal of those as well as the first table */ - for (n = 0; n < 256; n++) { - c = crc_table[0][n]; - crc_table[4][n] = REV(c); - for (k = 1; k < 4; k++) { - c = crc_table[0][c & 0xff] ^ (c >> 8); - crc_table[k][n] = c; - crc_table[k + 4][n] = REV(c); - } - } -#endif /* BYFOUR */ - - crc_table_empty = 0; - } - else { /* not first */ - /* wait for the other guy to finish (not efficient, but rare) */ - while (crc_table_empty) - ; - } - -#ifdef MAKECRCH - /* write out CRC tables to crc32.h */ - { - FILE *out; - - out = fopen("crc32.h", "w"); - if (out == NULL) return; - fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n"); - fprintf(out, " * Generated automatically by crc32.c\n */\n\n"); - fprintf(out, "local const unsigned long FAR "); - fprintf(out, "crc_table[TBLS][256] =\n{\n {\n"); - write_table(out, crc_table[0]); -# ifdef BYFOUR - fprintf(out, "#ifdef BYFOUR\n"); - for (k = 1; k < 8; k++) { - fprintf(out, " },\n {\n"); - write_table(out, crc_table[k]); - } - fprintf(out, "#endif\n"); -# endif /* BYFOUR */ - fprintf(out, " }\n};\n"); - fclose(out); - } -#endif /* MAKECRCH */ -} - -#ifdef MAKECRCH -local void write_table(out, table) - FILE *out; - const unsigned long FAR *table; -{ - int n; - - for (n = 0; n < 256; n++) - fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n], - n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", ")); -} -#endif /* MAKECRCH */ - -#else /* !DYNAMIC_CRC_TABLE */ -/* ======================================================================== - * Tables of CRC-32s of all single-byte values, made by make_crc_table(). - */ -#include "crc32.h" -#endif /* DYNAMIC_CRC_TABLE */ - -/* ========================================================================= - * This function can be used by asm versions of crc32() - */ -const unsigned long FAR * ZEXPORT get_crc_table() -{ -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif /* DYNAMIC_CRC_TABLE */ - return (const unsigned long FAR *)crc_table; -} - -/* ========================================================================= */ -#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) -#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 - -/* ========================================================================= */ -unsigned long ZEXPORT crc32(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - if (buf == Z_NULL) return 0UL; - -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif /* DYNAMIC_CRC_TABLE */ - -#ifdef BYFOUR - if (sizeof(void *) == sizeof(ptrdiff_t)) { - u4 endian; - - endian = 1; - if (*((unsigned char *)(&endian))) - return crc32_little(crc, buf, len); - else - return crc32_big(crc, buf, len); - } -#endif /* BYFOUR */ - crc = crc ^ 0xffffffffUL; - while (len >= 8) { - DO8; - len -= 8; - } - if (len) do { - DO1; - } while (--len); - return crc ^ 0xffffffffUL; -} - -#ifdef BYFOUR - -/* ========================================================================= */ -#define DOLIT4 c ^= *buf4++; \ - c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ - crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] -#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 - -/* ========================================================================= */ -local unsigned long crc32_little(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - register u4 c; - register const u4 FAR *buf4; - - c = (u4)crc; - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - len--; - } - - buf4 = (const u4 FAR *)(const void FAR *)buf; - while (len >= 32) { - DOLIT32; - len -= 32; - } - while (len >= 4) { - DOLIT4; - len -= 4; - } - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - } while (--len); - c = ~c; - return (unsigned long)c; -} - -/* ========================================================================= */ -#define DOBIG4 c ^= *++buf4; \ - c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ - crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] -#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 - -/* ========================================================================= */ -local unsigned long crc32_big(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - register u4 c; - register const u4 FAR *buf4; - - c = REV((u4)crc); - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - len--; - } - - buf4 = (const u4 FAR *)(const void FAR *)buf; - buf4--; - while (len >= 32) { - DOBIG32; - len -= 32; - } - while (len >= 4) { - DOBIG4; - len -= 4; - } - buf4++; - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - } while (--len); - c = ~c; - return (unsigned long)(REV(c)); -} - -#endif /* BYFOUR */ - -#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ - -/* ========================================================================= */ -local unsigned long gf2_matrix_times(mat, vec) - unsigned long *mat; - unsigned long vec; -{ - unsigned long sum; - - sum = 0; - while (vec) { - if (vec & 1) - sum ^= *mat; - vec >>= 1; - mat++; - } - return sum; -} - -/* ========================================================================= */ -local void gf2_matrix_square(square, mat) - unsigned long *square; - unsigned long *mat; -{ - int n; - - for (n = 0; n < GF2_DIM; n++) - square[n] = gf2_matrix_times(mat, mat[n]); -} - -/* ========================================================================= */ -uLong ZEXPORT crc32_combine(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off_t len2; -{ - int n; - unsigned long row; - unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ - unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ - - /* degenerate case */ - if (len2 == 0) - return crc1; - - /* put operator for one zero bit in odd */ - odd[0] = 0xedb88320UL; /* CRC-32 polynomial */ - row = 1; - for (n = 1; n < GF2_DIM; n++) { - odd[n] = row; - row <<= 1; - } - - /* put operator for two zero bits in even */ - gf2_matrix_square(even, odd); - - /* put operator for four zero bits in odd */ - gf2_matrix_square(odd, even); - - /* apply len2 zeros to crc1 (first square will put the operator for one - zero byte, eight zero bits, in even) */ - do { - /* apply zeros operator for this bit of len2 */ - gf2_matrix_square(even, odd); - if (len2 & 1) - crc1 = gf2_matrix_times(even, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - if (len2 == 0) - break; - - /* another iteration of the loop with odd and even swapped */ - gf2_matrix_square(odd, even); - if (len2 & 1) - crc1 = gf2_matrix_times(odd, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - } while (len2 != 0); - - /* return combined crc */ - crc1 ^= crc2; - return crc1; -} Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h (nonexistent) @@ -1,117 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ - -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#ifndef _ZCONF_H -#define _ZCONF_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include -#include -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * We don't want to turn on zlib's debugging. - */ -#undef DEBUG - -/* - * We define our own memory allocation and deallocation routines that use kmem. - */ -#define MY_ZCALLOC - -/* - * We don't define HAVE_MEMCPY here, but do in zutil.c, and implement our - * our versions of zmemcpy(), zmemzero(), and zmemcmp(). - */ - -/* - * We have a sufficiently capable compiler as to not need zlib's compiler hack. - */ -#define NO_DUMMY_DECL - -#define compressBound(len) (len + (len >> 12) + (len >> 14) + 11) - -#define z_off_t off_t -#define OF(p) p -#define ZEXTERN extern -#define ZEXPORT -#define ZEXPORTVA -#define FAR - -#define deflateInit_ z_deflateInit_ -#define deflate z_deflate -#define deflateEnd z_deflateEnd -#define inflateInit_ z_inflateInit_ -#define inflate z_inflate -#define inflateEnd z_inflateEnd -#define deflateInit2_ z_deflateInit2_ -#define deflateSetDictionary z_deflateSetDictionary -#define deflateCopy z_deflateCopy -#define deflateReset z_deflateReset -#define deflateParams z_deflateParams -#define deflateBound z_deflateBound -#define deflatePrime z_deflatePrime -#define inflateInit2_ z_inflateInit2_ -#define inflateSetDictionary z_inflateSetDictionary -#define inflateSync z_inflateSync -#define inflateSyncPoint z_inflateSyncPoint -#define inflateCopy z_inflateCopy -#define inflateReset z_inflateReset -#define inflateBack z_inflateBack -#define inflateBackEnd z_inflateBackEnd -#define compress zz_compress -#define compress2 zz_compress2 -#define uncompress zz_uncompress -#define adler32 z_adler32 -#define crc32 z_crc32 -#define get_crc_table z_get_crc_table -#define zError z_zError - -#define MAX_MEM_LEVEL 9 -#define MAX_WBITS 15 - -typedef unsigned char Byte; -typedef unsigned int uInt; -typedef unsigned long uLong; -typedef Byte Bytef; -typedef char charf; -typedef int intf; -typedef uInt uIntf; -typedef uLong uLongf; -typedef void *voidpc; -typedef void *voidpf; -typedef void *voidp; - -#ifdef __cplusplus -} -#endif - -#endif /* _ZCONF_H */ Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h (nonexistent) @@ -1,96 +0,0 @@ - /* inffixed.h -- table for decoding fixed codes - * Generated automatically by makefixed(). - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - - /* WARNING: this file should *not* be used by applications. It - is part of the implementation of the compression library and - is subject to change. Applications should only use zlib.h. - */ - - static const code lenfix[512] = { - {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, - {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, - {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, - {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, - {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, - {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, - {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, - {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, - {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, - {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, - {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, - {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, - {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, - {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, - {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, - {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, - {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, - {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, - {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, - {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, - {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, - {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, - {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, - {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, - {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, - {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, - {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, - {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, - {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, - {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, - {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, - {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, - {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, - {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, - {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, - {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, - {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, - {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, - {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, - {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, - {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, - {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, - {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, - {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, - {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, - {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, - {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, - {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, - {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, - {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, - {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, - {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, - {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, - {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, - {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, - {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, - {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, - {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, - {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, - {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, - {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, - {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, - {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, - {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, - {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, - {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, - {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, - {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, - {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, - {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, - {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, - {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, - {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, - {0,9,255} - }; - - static const code distfix[32] = { - {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, - {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, - {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, - {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, - {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, - {22,5,193},{64,5,0} - }; Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c (nonexistent) @@ -1,1742 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* deflate.c -- compress data using the deflation algorithm - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* - * ALGORITHM - * - * The "deflation" process depends on being able to identify portions - * of the input text which are identical to earlier input (within a - * sliding window trailing behind the input currently being processed). - * - * The most straightforward technique turns out to be the fastest for - * most input files: try all possible matches and select the longest. - * The key feature of this algorithm is that insertions into the string - * dictionary are very simple and thus fast, and deletions are avoided - * completely. Insertions are performed at each input character, whereas - * string matches are performed only when the previous match ends. So it - * is preferable to spend more time in matches to allow very fast string - * insertions and avoid deletions. The matching algorithm for small - * strings is inspired from that of Rabin & Karp. A brute force approach - * is used to find longer strings when a small match has been found. - * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze - * (by Leonid Broukhis). - * A previous version of this file used a more sophisticated algorithm - * (by Fiala and Greene) which is guaranteed to run in linear amortized - * time, but has a larger average cost, uses more memory and is patented. - * However the F&G algorithm may be faster for some highly redundant - * files if the parameter max_chain_length (described below) is too large. - * - * ACKNOWLEDGEMENTS - * - * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and - * I found it in 'freeze' written by Leonid Broukhis. - * Thanks to many people for bug reports and testing. - * - * REFERENCES - * - * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". - * Available in http://www.ietf.org/rfc/rfc1951.txt - * - * A description of the Rabin and Karp algorithm is given in the book - * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. - * - * Fiala,E.R., and Greene,D.H. - * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 - * - */ - -#include "deflate.h" - -static const char deflate_copyright[] = - " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* =========================================================================== - * Function prototypes. - */ -typedef enum { - need_more, /* block not completed, need more input or more output */ - block_done, /* block flush performed */ - finish_started, /* finish started, need only more output at next deflate */ - finish_done /* finish done, accept no more input or output */ -} block_state; - -typedef block_state (*compress_func) OF((deflate_state *s, int flush)); -/* Compression function. Returns the block state after the call. */ - -local void fill_window OF((deflate_state *s)); -local block_state deflate_stored OF((deflate_state *s, int flush)); -local block_state deflate_fast OF((deflate_state *s, int flush)); -#ifndef FASTEST -local block_state deflate_slow OF((deflate_state *s, int flush)); -#endif -local void lm_init OF((deflate_state *s)); -local void putShortMSB OF((deflate_state *s, uInt b)); -local void flush_pending OF((z_streamp strm)); -local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); -#ifndef FASTEST -#ifdef ASMV - void match_init OF((void)); /* asm code initialization */ - uInt longest_match OF((deflate_state *s, IPos cur_match)); -#else -local uInt longest_match OF((deflate_state *s, IPos cur_match)); -#endif -#endif -local uInt longest_match_fast OF((deflate_state *s, IPos cur_match)); - -#ifdef DEBUG -local void check_match OF((deflate_state *s, IPos start, IPos match, - int length)); -#endif - -/* =========================================================================== - * Local data - */ - -#define NIL 0 -/* Tail of hash chains */ - -#ifndef TOO_FAR -# define TOO_FAR 4096 -#endif -/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ - -#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) -/* Minimum amount of lookahead, except at the end of the input file. - * See deflate.c for comments about the MIN_MATCH+1. - */ - -/* Values for max_lazy_match, good_match and max_chain_length, depending on - * the desired pack level (0..9). The values given below have been tuned to - * exclude worst case performance for pathological files. Better values may be - * found for specific files. - */ -typedef struct config_s { - ush good_length; /* reduce lazy search above this match length */ - ush max_lazy; /* do not perform lazy search above this match length */ - ush nice_length; /* quit search above this match length */ - ush max_chain; - compress_func func; -} config; - -#ifdef FASTEST -local const config configuration_table[2] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ -#else -local const config configuration_table[10] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ -/* 2 */ {4, 5, 16, 8, deflate_fast}, -/* 3 */ {4, 6, 32, 32, deflate_fast}, - -/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ -/* 5 */ {8, 16, 32, 32, deflate_slow}, -/* 6 */ {8, 16, 128, 128, deflate_slow}, -/* 7 */ {8, 32, 128, 256, deflate_slow}, -/* 8 */ {32, 128, 258, 1024, deflate_slow}, -/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ -#endif - -/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 - * For deflate_fast() (levels <= 3) good is ignored and lazy has a different - * meaning. - */ - -#define EQUAL 0 -/* result of memcmp for equal strings */ - -#ifndef NO_DUMMY_DECL -struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ -#endif - -/* =========================================================================== - * Update a hash value with the given input byte - * IN assertion: all calls to to UPDATE_HASH are made with consecutive - * input characters, so that a running hash key can be computed from the - * previous key instead of complete recalculation each time. - */ -#define UPDATE_HASH(s,h,c) (h = (((h)<hash_shift) ^ (c)) & s->hash_mask) - - -/* =========================================================================== - * Insert string str in the dictionary and set match_head to the previous head - * of the hash chain (the most recent string with same hash key). Return - * the previous length of the hash chain. - * If this file is compiled with -DFASTEST, the compression level is forced - * to 1, and no hash chains are maintained. - * IN assertion: all calls to to INSERT_STRING are made with consecutive - * input characters and the first MIN_MATCH bytes of str are valid - * (except for the last MIN_MATCH-1 bytes of the input file). - */ -#ifdef FASTEST -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - match_head = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) -#else -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) -#endif - -/* =========================================================================== - * Initialize the hash table (avoiding 64K overflow for 16 bit systems). - * prev[] will be initialized on the fly. - */ -#define CLEAR_HASH(s) \ - s->head[s->hash_size-1] = NIL; \ - (void) zmemzero((Bytef *)s->head, \ - (unsigned)(s->hash_size-1)*sizeof(*s->head)); - -/* ========================================================================= */ -int ZEXPORT deflateInit_(strm, level, version, stream_size) - z_streamp strm; - int level; - const char *version; - int stream_size; -{ - return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, - Z_DEFAULT_STRATEGY, version, stream_size); - /* To do: ignore strm->next_in if we use it as window */ -} - -/* ========================================================================= */ -int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, - version, stream_size) - z_streamp strm; - int level; - int method; - int windowBits; - int memLevel; - int strategy; - const char *version; - int stream_size; -{ - deflate_state *s; - int wrap = 1; - static const char my_version[] = ZLIB_VERSION; - - ushf *overlay; - /* We overlay pending_buf and d_buf+l_buf. This works since the average - * output size for (length,distance) codes is <= 24 bits. - */ - - if (version == Z_NULL || version[0] != my_version[0] || - stream_size != sizeof(z_stream)) { - return Z_VERSION_ERROR; - } - if (strm == Z_NULL) return Z_STREAM_ERROR; - - strm->msg = Z_NULL; - if (strm->zalloc == (alloc_func)0) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; - -#ifdef FASTEST - if (level != 0) level = 1; -#else - if (level == Z_DEFAULT_COMPRESSION) level = 6; -#endif - - if (windowBits < 0) { /* suppress zlib wrapper */ - wrap = 0; - windowBits = -windowBits; - } -#ifdef GZIP - else if (windowBits > 15) { - wrap = 2; /* write gzip wrapper instead */ - windowBits -= 16; - } -#endif - if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || - windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || - strategy < 0 || strategy > Z_FIXED) { - return Z_STREAM_ERROR; - } - if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ - s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); - if (s == Z_NULL) return Z_MEM_ERROR; - strm->state = (struct internal_state FAR *)s; - s->strm = strm; - - s->wrap = wrap; - s->gzhead = Z_NULL; - s->w_bits = windowBits; - s->w_size = 1 << s->w_bits; - s->w_mask = s->w_size - 1; - - s->hash_bits = memLevel + 7; - s->hash_size = 1 << s->hash_bits; - s->hash_mask = s->hash_size - 1; - s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); - - s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); - s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); - s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); - - s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ - - overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); - s->pending_buf = (uchf *) overlay; - s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); - - if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || - s->pending_buf == Z_NULL) { - s->status = FINISH_STATE; - strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); - (void) deflateEnd (strm); - return Z_MEM_ERROR; - } - s->d_buf = overlay + s->lit_bufsize/sizeof(ush); - s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; - - s->level = level; - s->strategy = strategy; - s->method = (Byte)method; - - return deflateReset(strm); -} - -/* ========================================================================= */ -int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) - z_streamp strm; - const Bytef *dictionary; - uInt dictLength; -{ - deflate_state *s; - uInt length = dictLength; - uInt n; - IPos hash_head = 0; - - if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL || - strm->state->wrap == 2 || - (strm->state->wrap == 1 && strm->state->status != INIT_STATE)) - return Z_STREAM_ERROR; - - s = strm->state; - if (s->wrap) - strm->adler = adler32(strm->adler, dictionary, dictLength); - - if (length < MIN_MATCH) return Z_OK; - if (length > MAX_DIST(s)) { - length = MAX_DIST(s); - dictionary += dictLength - length; /* use the tail of the dictionary */ - } - (void) zmemcpy(s->window, dictionary, length); - s->strstart = length; - s->block_start = (long)length; - - /* Insert all strings in the hash table (except for the last two bytes). - * s->lookahead stays null, so s->ins_h will be recomputed at the next - * call of fill_window. - */ - s->ins_h = s->window[0]; - UPDATE_HASH(s, s->ins_h, s->window[1]); - for (n = 0; n <= length - MIN_MATCH; n++) { - INSERT_STRING(s, n, hash_head); - } - if (hash_head) hash_head = 0; /* to make compiler happy */ - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateReset (strm) - z_streamp strm; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { - return Z_STREAM_ERROR; - } - - strm->total_in = strm->total_out = 0; - strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ - strm->data_type = Z_UNKNOWN; - - s = (deflate_state *)strm->state; - s->pending = 0; - s->pending_out = s->pending_buf; - - if (s->wrap < 0) { - s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ - } - s->status = s->wrap ? INIT_STATE : BUSY_STATE; - strm->adler = -#ifdef GZIP - s->wrap == 2 ? crc32(0L, Z_NULL, 0) : -#endif - adler32(0L, Z_NULL, 0); - s->last_flush = Z_NO_FLUSH; - - _tr_init(s); - lm_init(s); - - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateSetHeader (strm, head) - z_streamp strm; - gz_headerp head; -{ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - if (strm->state->wrap != 2) return Z_STREAM_ERROR; - strm->state->gzhead = head; - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflatePrime (strm, bits, value) - z_streamp strm; - int bits; - int value; -{ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - strm->state->bi_valid = bits; - strm->state->bi_buf = (ush)(value & ((1 << bits) - 1)); - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateParams(strm, level, strategy) - z_streamp strm; - int level; - int strategy; -{ - deflate_state *s; - compress_func func; - int err = Z_OK; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - -#ifdef FASTEST - if (level != 0) level = 1; -#else - if (level == Z_DEFAULT_COMPRESSION) level = 6; -#endif - if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { - return Z_STREAM_ERROR; - } - func = configuration_table[s->level].func; - - if (func != configuration_table[level].func && strm->total_in != 0) { - /* Flush the last buffer: */ - err = deflate(strm, Z_PARTIAL_FLUSH); - } - if (s->level != level) { - s->level = level; - s->max_lazy_match = configuration_table[level].max_lazy; - s->good_match = configuration_table[level].good_length; - s->nice_match = configuration_table[level].nice_length; - s->max_chain_length = configuration_table[level].max_chain; - } - s->strategy = strategy; - return err; -} - -/* ========================================================================= */ -int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) - z_streamp strm; - int good_length; - int max_lazy; - int nice_length; - int max_chain; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - s->good_match = good_length; - s->max_lazy_match = max_lazy; - s->nice_match = nice_length; - s->max_chain_length = max_chain; - return Z_OK; -} - -/* ========================================================================= - * For the default windowBits of 15 and memLevel of 8, this function returns - * a close to exact, as well as small, upper bound on the compressed size. - * They are coded as constants here for a reason--if the #define's are - * changed, then this function needs to be changed as well. The return - * value for 15 and 8 only works for those exact settings. - * - * For any setting other than those defaults for windowBits and memLevel, - * the value returned is a conservative worst case for the maximum expansion - * resulting from using fixed blocks instead of stored blocks, which deflate - * can emit on compressed data for some combinations of the parameters. - * - * This function could be more sophisticated to provide closer upper bounds - * for every combination of windowBits and memLevel, as well as wrap. - * But even the conservative upper bound of about 14% expansion does not - * seem onerous for output buffer allocation. - */ -uLong ZEXPORT deflateBound(strm, sourceLen) - z_streamp strm; - uLong sourceLen; -{ - deflate_state *s; - uLong destLen; - - /* conservative upper bound */ - destLen = sourceLen + - ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11; - - /* if can't get parameters, return conservative bound */ - if (strm == Z_NULL || strm->state == Z_NULL) - return destLen; - - /* if not default parameters, return conservative bound */ - s = strm->state; - if (s->w_bits != 15 || s->hash_bits != 8 + 7) - return destLen; - - /* default settings: return tight bound for that case */ - return compressBound(sourceLen); -} - -/* ========================================================================= - * Put a short in the pending buffer. The 16-bit value is put in MSB order. - * IN assertion: the stream state is correct and there is enough room in - * pending_buf. - */ -local void putShortMSB (s, b) - deflate_state *s; - uInt b; -{ - put_byte(s, (Byte)(b >> 8)); - put_byte(s, (Byte)(b & 0xff)); -} - -/* ========================================================================= - * Flush as much pending output as possible. All deflate() output goes - * through this function so some applications may wish to modify it - * to avoid allocating a large strm->next_out buffer and copying into it. - * (See also read_buf()). - */ -local void flush_pending(strm) - z_streamp strm; -{ - unsigned len = strm->state->pending; - - if (len > strm->avail_out) len = strm->avail_out; - if (len == 0) return; - - zmemcpy(strm->next_out, strm->state->pending_out, len); - strm->next_out += len; - strm->state->pending_out += len; - strm->total_out += len; - strm->avail_out -= len; - strm->state->pending -= len; - if (strm->state->pending == 0) { - strm->state->pending_out = strm->state->pending_buf; - } -} - -/* ========================================================================= */ -int ZEXPORT deflate (strm, flush) - z_streamp strm; - int flush; -{ - int old_flush; /* value of flush param for previous deflate call */ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - flush > Z_FINISH || flush < 0) { - return Z_STREAM_ERROR; - } - s = strm->state; - - if (strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0) || - (s->status == FINISH_STATE && flush != Z_FINISH)) { - ERR_RETURN(strm, Z_STREAM_ERROR); - } - if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); - - s->strm = strm; /* just in case */ - old_flush = s->last_flush; - s->last_flush = flush; - - /* Write the header */ - if (s->status == INIT_STATE) { -#ifdef GZIP - if (s->wrap == 2) { - strm->adler = crc32(0L, Z_NULL, 0); - put_byte(s, 31); - put_byte(s, 139); - put_byte(s, 8); - if (s->gzhead == NULL) { - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, OS_CODE); - s->status = BUSY_STATE; - } - else { - put_byte(s, (s->gzhead->text ? 1 : 0) + - (s->gzhead->hcrc ? 2 : 0) + - (s->gzhead->extra == Z_NULL ? 0 : 4) + - (s->gzhead->name == Z_NULL ? 0 : 8) + - (s->gzhead->comment == Z_NULL ? 0 : 16) - ); - put_byte(s, (Byte)(s->gzhead->time & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, s->gzhead->os & 0xff); - if (s->gzhead->extra != NULL) { - put_byte(s, s->gzhead->extra_len & 0xff); - put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); - } - if (s->gzhead->hcrc) - strm->adler = crc32(strm->adler, s->pending_buf, - s->pending); - s->gzindex = 0; - s->status = EXTRA_STATE; - } - } - else -#endif - { - uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; - uInt level_flags; - - if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) - level_flags = 0; - else if (s->level < 6) - level_flags = 1; - else if (s->level == 6) - level_flags = 2; - else - level_flags = 3; - header |= (level_flags << 6); - if (s->strstart != 0) header |= PRESET_DICT; - header += 31 - (header % 31); - - s->status = BUSY_STATE; - putShortMSB(s, header); - - /* Save the adler32 of the preset dictionary: */ - if (s->strstart != 0) { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - strm->adler = adler32(0L, Z_NULL, 0); - } - } -#ifdef GZIP - if (s->status == EXTRA_STATE) { - if (s->gzhead->extra != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - - while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) - break; - } - put_byte(s, s->gzhead->extra[s->gzindex]); - s->gzindex++; - } - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (s->gzindex == s->gzhead->extra_len) { - s->gzindex = 0; - s->status = NAME_STATE; - } - } - else - s->status = NAME_STATE; - } - if (s->status == NAME_STATE) { - if (s->gzhead->name != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - int val; - - do { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) { - val = 1; - break; - } - } - val = s->gzhead->name[s->gzindex++]; - put_byte(s, val); - } while (val != 0); - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (val == 0) { - s->gzindex = 0; - s->status = COMMENT_STATE; - } - } - else - s->status = COMMENT_STATE; - } - if (s->status == COMMENT_STATE) { - if (s->gzhead->comment != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - int val; - - do { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) { - val = 1; - break; - } - } - val = s->gzhead->comment[s->gzindex++]; - put_byte(s, val); - } while (val != 0); - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (val == 0) - s->status = HCRC_STATE; - } - else - s->status = HCRC_STATE; - } - if (s->status == HCRC_STATE) { - if (s->gzhead->hcrc) { - if (s->pending + 2 > s->pending_buf_size) - flush_pending(strm); - if (s->pending + 2 <= s->pending_buf_size) { - put_byte(s, (Byte)(strm->adler & 0xff)); - put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); - strm->adler = crc32(0L, Z_NULL, 0); - s->status = BUSY_STATE; - } - } - else - s->status = BUSY_STATE; - } -#endif - - /* Flush as much pending output as possible */ - if (s->pending != 0) { - flush_pending(strm); - if (strm->avail_out == 0) { - /* Since avail_out is 0, deflate will be called again with - * more output space, but possibly with both pending and - * avail_in equal to zero. There won't be anything to do, - * but this is not an error situation so make sure we - * return OK instead of BUF_ERROR at next call of deflate: - */ - s->last_flush = -1; - return Z_OK; - } - - /* Make sure there is something to do and avoid duplicate consecutive - * flushes. For repeated and useless calls with Z_FINISH, we keep - * returning Z_STREAM_END instead of Z_BUF_ERROR. - */ - } else if (strm->avail_in == 0 && flush <= old_flush && - flush != Z_FINISH) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* User must not provide more input after the first FINISH: */ - if (s->status == FINISH_STATE && strm->avail_in != 0) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* Start a new block or continue the current one. - */ - if (strm->avail_in != 0 || s->lookahead != 0 || - (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { - block_state bstate; - - bstate = (*(configuration_table[s->level].func))(s, flush); - - if (bstate == finish_started || bstate == finish_done) { - s->status = FINISH_STATE; - } - if (bstate == need_more || bstate == finish_started) { - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ - } - return Z_OK; - /* If flush != Z_NO_FLUSH && avail_out == 0, the next call - * of deflate should use the same flush parameter to make sure - * that the flush is complete. So we don't have to output an - * empty block here, this will be done at next call. This also - * ensures that for a very small output buffer, we emit at most - * one empty block. - */ - } - if (bstate == block_done) { - if (flush == Z_PARTIAL_FLUSH) { - _tr_align(s); - } else { /* FULL_FLUSH or SYNC_FLUSH */ - _tr_stored_block(s, (char*)0, 0L, 0); - /* For a full flush, this empty block will be recognized - * as a special marker by inflate_sync(). - */ - if (flush == Z_FULL_FLUSH) { - CLEAR_HASH(s); /* forget history */ - } - } - flush_pending(strm); - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ - return Z_OK; - } - } - } - Assert(strm->avail_out > 0, "bug2"); - - if (flush != Z_FINISH) return Z_OK; - if (s->wrap <= 0) return Z_STREAM_END; - - /* Write the trailer */ -#ifdef GZIP - if (s->wrap == 2) { - put_byte(s, (Byte)(strm->adler & 0xff)); - put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); - put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); - put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); - put_byte(s, (Byte)(strm->total_in & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); - } - else -#endif - { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - flush_pending(strm); - /* If avail_out is zero, the application will call deflate again - * to flush the rest. - */ - if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ - return s->pending != 0 ? Z_OK : Z_STREAM_END; -} - -/* ========================================================================= */ -int ZEXPORT deflateEnd (strm) - z_streamp strm; -{ - int status; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - - status = strm->state->status; - if (status != INIT_STATE && - status != EXTRA_STATE && - status != NAME_STATE && - status != COMMENT_STATE && - status != HCRC_STATE && - status != BUSY_STATE && - status != FINISH_STATE) { - return Z_STREAM_ERROR; - } - - /* Deallocate in reverse order of allocations: */ - TRY_FREE(strm, strm->state->pending_buf); - TRY_FREE(strm, strm->state->head); - TRY_FREE(strm, strm->state->prev); - TRY_FREE(strm, strm->state->window); - - ZFREE(strm, strm->state); - strm->state = Z_NULL; - - return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; -} - -/* ========================================================================= - * Copy the source state to the destination state. - * To simplify the source, this is not supported for 16-bit MSDOS (which - * doesn't have enough memory anyway to duplicate compression states). - */ -int ZEXPORT deflateCopy (dest, source) - z_streamp dest; - z_streamp source; -{ -#ifdef MAXSEG_64K - return Z_STREAM_ERROR; -#else - deflate_state *ds; - deflate_state *ss; - ushf *overlay; - - - if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { - return Z_STREAM_ERROR; - } - - ss = source->state; - - zmemcpy(dest, source, sizeof(z_stream)); - - ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); - if (ds == Z_NULL) return Z_MEM_ERROR; - dest->state = (struct internal_state FAR *) ds; - zmemcpy(ds, ss, sizeof(deflate_state)); - ds->strm = dest; - - ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); - ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); - ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); - overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); - ds->pending_buf = (uchf *) overlay; - - if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || - ds->pending_buf == Z_NULL) { - deflateEnd (dest); - return Z_MEM_ERROR; - } - /* following zmemcpy do not work for 16-bit MSDOS */ - zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); - zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); - zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); - zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); - - ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); - ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); - ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; - - ds->l_desc.dyn_tree = ds->dyn_ltree; - ds->d_desc.dyn_tree = ds->dyn_dtree; - ds->bl_desc.dyn_tree = ds->bl_tree; - - return Z_OK; -#endif /* MAXSEG_64K */ -} - -/* =========================================================================== - * Read a new buffer from the current input stream, update the adler32 - * and total number of bytes read. All deflate() input goes through - * this function so some applications may wish to modify it to avoid - * allocating a large strm->next_in buffer and copying from it. - * (See also flush_pending()). - */ -local int read_buf(strm, buf, size) - z_streamp strm; - Bytef *buf; - unsigned size; -{ - unsigned len = strm->avail_in; - - if (len > size) len = size; - if (len == 0) return 0; - - strm->avail_in -= len; - - if (strm->state->wrap == 1) { - strm->adler = adler32(strm->adler, strm->next_in, len); - } -#ifdef GZIP - else if (strm->state->wrap == 2) { - strm->adler = crc32(strm->adler, strm->next_in, len); - } -#endif - zmemcpy(buf, strm->next_in, len); - strm->next_in += len; - strm->total_in += len; - - return (int)len; -} - -/* =========================================================================== - * Initialize the "longest match" routines for a new zlib stream - */ -local void lm_init (s) - deflate_state *s; -{ - s->window_size = (ulg)2L*s->w_size; - - CLEAR_HASH(s); - - /* Set the default configuration parameters: - */ - s->max_lazy_match = configuration_table[s->level].max_lazy; - s->good_match = configuration_table[s->level].good_length; - s->nice_match = configuration_table[s->level].nice_length; - s->max_chain_length = configuration_table[s->level].max_chain; - - s->strstart = 0; - s->block_start = 0L; - s->lookahead = 0; - s->match_length = s->prev_length = MIN_MATCH-1; - s->match_available = 0; - s->ins_h = 0; -#ifndef FASTEST -#ifdef ASMV - match_init(); /* initialize the asm code */ -#endif -#endif -} - -#ifndef FASTEST -/* =========================================================================== - * Set match_start to the longest match starting at the given string and - * return its length. Matches shorter or equal to prev_length are discarded, - * in which case the result is equal to prev_length and match_start is - * garbage. - * IN assertions: cur_match is the head of the hash chain for the current - * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 - * OUT assertion: the match length is not greater than s->lookahead. - */ -#ifndef ASMV -/* For 80x86 and 680x0, an optimized version will be provided in match.asm or - * match.S. The code will be functionally equivalent. - */ -local uInt longest_match(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - unsigned chain_length = s->max_chain_length;/* max hash chain length */ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - int best_len = s->prev_length; /* best match length so far */ - int nice_match = s->nice_match; /* stop if match long enough */ - IPos limit = s->strstart > (IPos)MAX_DIST(s) ? - s->strstart - (IPos)MAX_DIST(s) : NIL; - /* Stop when cur_match becomes <= limit. To simplify the code, - * we prevent matches with the string of window index 0. - */ - Posf *prev = s->prev; - uInt wmask = s->w_mask; - -#ifdef UNALIGNED_OK - /* Compare two bytes at a time. Note: this is not always beneficial. - * Try with and without -DUNALIGNED_OK to check. - */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; - register ush scan_start = *(ushf*)scan; - register ush scan_end = *(ushf*)(scan+best_len-1); -#else - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - register Byte scan_end1 = scan[best_len-1]; - register Byte scan_end = scan[best_len]; -#endif - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - /* Do not waste too much time if we already have a good match: */ - if (s->prev_length >= s->good_match) { - chain_length >>= 2; - } - /* Do not look for matches beyond the end of the input. This is necessary - * to make deflate deterministic. - */ - if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - do { - Assert(cur_match < s->strstart, "no future"); - match = s->window + cur_match; - - /* Skip to next match if the match length cannot increase - * or if the match length is less than 2. Note that the checks below - * for insufficient lookahead only occur occasionally for performance - * reasons. Therefore uninitialized memory will be accessed, and - * conditional jumps will be made that depend on those values. - * However the length of the match is limited to the lookahead, so - * the output of deflate is not affected by the uninitialized values. - */ -#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) - /* This code assumes sizeof(unsigned short) == 2. Do not use - * UNALIGNED_OK if your compiler uses a different size. - */ - if (*(ushf*)(match+best_len-1) != scan_end || - *(ushf*)match != scan_start) continue; - - /* It is not necessary to compare scan[2] and match[2] since they are - * always equal when the other bytes match, given that the hash keys - * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at - * strstart+3, +5, ... up to strstart+257. We check for insufficient - * lookahead only every 4th comparison; the 128th check will be made - * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is - * necessary to put more guard bytes at the end of the window, or - * to check more often for insufficient lookahead. - */ - Assert(scan[2] == match[2], "scan[2]?"); - scan++, match++; - do { - } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - scan < strend); - /* The funny "do {}" generates better code on most compilers */ - - /* Here, scan <= window+strstart+257 */ - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - if (*scan == *match) scan++; - - len = (MAX_MATCH - 1) - (int)(strend-scan); - scan = strend - (MAX_MATCH-1); - -#else /* UNALIGNED_OK */ - - if (match[best_len] != scan_end || - match[best_len-1] != scan_end1 || - *match != *scan || - *++match != scan[1]) continue; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match++; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - scan = strend - MAX_MATCH; - -#endif /* UNALIGNED_OK */ - - if (len > best_len) { - s->match_start = cur_match; - best_len = len; - if (len >= nice_match) break; -#ifdef UNALIGNED_OK - scan_end = *(ushf*)(scan+best_len-1); -#else - scan_end1 = scan[best_len-1]; - scan_end = scan[best_len]; -#endif - } - } while ((cur_match = prev[cur_match & wmask]) > limit - && --chain_length != 0); - - if ((uInt)best_len <= s->lookahead) return (uInt)best_len; - return s->lookahead; -} -#endif /* ASMV */ -#endif /* FASTEST */ - -/* --------------------------------------------------------------------------- - * Optimized version for level == 1 or strategy == Z_RLE only - */ -local uInt longest_match_fast(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - Assert(cur_match < s->strstart, "no future"); - - match = s->window + cur_match; - - /* Return failure if the match length is less than 2: - */ - if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match += 2; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - - if (len < MIN_MATCH) return MIN_MATCH - 1; - - s->match_start = cur_match; - return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; -} - -#ifdef DEBUG -/* =========================================================================== - * Check that the match at match_start is indeed a match. - */ -local void check_match(s, start, match, length) - deflate_state *s; - IPos start, match; - int length; -{ - /* check that the match is indeed a match */ - if (zmemcmp(s->window + match, - s->window + start, length) != EQUAL) { - fprintf(stderr, " start %u, match %u, length %d\n", - start, match, length); - do { - fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); - } while (--length != 0); - z_error("invalid match"); - } - if (z_verbose > 1) { - fprintf(stderr,"\\[%d,%d]", start-match, length); - do { putc(s->window[start++], stderr); } while (--length != 0); - } -} -#else -# define check_match(s, start, match, length) -#endif /* DEBUG */ - -/* =========================================================================== - * Fill the window when the lookahead becomes insufficient. - * Updates strstart and lookahead. - * - * IN assertion: lookahead < MIN_LOOKAHEAD - * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD - * At least one byte has been read, or avail_in == 0; reads are - * performed for at least two bytes (required for the zip translate_eol - * option -- not supported here). - */ -local void fill_window(s) - deflate_state *s; -{ - register unsigned n, m; - register Posf *p; - unsigned more; /* Amount of free space at the end of the window. */ - uInt wsize = s->w_size; - - do { - more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); - - /* Deal with !@#$% 64K limit: */ - if (sizeof(int) <= 2) { - if (more == 0 && s->strstart == 0 && s->lookahead == 0) { - more = wsize; - - } else if (more == (unsigned)(-1)) { - /* Very unlikely, but possible on 16 bit machine if - * strstart == 0 && lookahead == 1 (input done a byte at time) - */ - more--; - } - } - - /* If the window is almost full and there is insufficient lookahead, - * move the upper half to the lower one to make room in the upper half. - */ - if (s->strstart >= wsize+MAX_DIST(s)) { - - zmemcpy(s->window, s->window+wsize, (unsigned)wsize); - s->match_start -= wsize; - s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ - s->block_start -= (long) wsize; - - /* Slide the hash table (could be avoided with 32 bit values - at the expense of memory usage). We slide even when level == 0 - to keep the hash table consistent if we switch back to level > 0 - later. (Using level 0 permanently is not an optimal usage of - zlib, so we don't care about this pathological case.) - */ - /* %%% avoid this when Z_RLE */ - n = s->hash_size; - p = &s->head[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - } while (--n); - - n = wsize; -#ifndef FASTEST - p = &s->prev[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - /* If n is not on any hash chain, prev[n] is garbage but - * its value will never be used. - */ - } while (--n); -#endif - more += wsize; - } - if (s->strm->avail_in == 0) return; - - /* If there was no sliding: - * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && - * more == window_size - lookahead - strstart - * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) - * => more >= window_size - 2*WSIZE + 2 - * In the BIG_MEM or MMAP case (not yet supported), - * window_size == input_size + MIN_LOOKAHEAD && - * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. - * Otherwise, window_size == 2*WSIZE so more >= 2. - * If there was sliding, more >= WSIZE. So in all cases, more >= 2. - */ - Assert(more >= 2, "more < 2"); - - n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); - s->lookahead += n; - - /* Initialize the hash value now that we have some input: */ - if (s->lookahead >= MIN_MATCH) { - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - } - /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, - * but this is not important since only literal bytes will be emitted. - */ - - } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); -} - -/* =========================================================================== - * Flush the current block, with given end-of-file flag. - * IN assertion: strstart is set to the end of the current match. - */ -#define FLUSH_BLOCK_ONLY(s, eof) { \ - _tr_flush_block(s, (s->block_start >= 0L ? \ - (charf *)&s->window[(unsigned)s->block_start] : \ - (charf *)Z_NULL), \ - (ulg)((long)s->strstart - s->block_start), \ - (eof)); \ - s->block_start = s->strstart; \ - flush_pending(s->strm); \ - Tracev((stderr,"[FLUSH]")); \ -} - -/* Same but force premature exit if necessary. */ -#define FLUSH_BLOCK(s, eof) { \ - FLUSH_BLOCK_ONLY(s, eof); \ - if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \ -} - -/* =========================================================================== - * Copy without compression as much as possible from the input stream, return - * the current block state. - * This function does not insert new strings in the dictionary since - * uncompressible data is probably not useful. This function is used - * only for the level=0 compression option. - * NOTE: this function should be optimized to avoid extra copying from - * window to pending_buf. - */ -local block_state deflate_stored(s, flush) - deflate_state *s; - int flush; -{ - /* Stored blocks are limited to 0xffff bytes, pending_buf is limited - * to pending_buf_size, and each stored block has a 5 byte header: - */ - ulg max_block_size = 0xffff; - ulg max_start; - - if (max_block_size > s->pending_buf_size - 5) { - max_block_size = s->pending_buf_size - 5; - } - - /* Copy as much as possible from input to output: */ - for (;;) { - /* Fill the window as much as possible: */ - if (s->lookahead <= 1) { - - Assert(s->strstart < s->w_size+MAX_DIST(s) || - s->block_start >= (long)s->w_size, "slide too late"); - - fill_window(s); - if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; - - if (s->lookahead == 0) break; /* flush the current block */ - } - Assert(s->block_start >= 0L, "block gone"); - - s->strstart += s->lookahead; - s->lookahead = 0; - - /* Emit a stored block if pending_buf will be full: */ - max_start = s->block_start + max_block_size; - if (s->strstart == 0 || (ulg)s->strstart >= max_start) { - /* strstart == 0 is possible when wraparound on 16-bit machine */ - s->lookahead = (uInt)(s->strstart - max_start); - s->strstart = (uInt)max_start; - FLUSH_BLOCK(s, 0); - } - /* Flush if we may have to slide, otherwise block_start may become - * negative and the data will be gone: - */ - if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { - FLUSH_BLOCK(s, 0); - } - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} - -/* =========================================================================== - * Compress as much as possible from the input stream, return the current - * block state. - * This function does not perform lazy evaluation of matches and inserts - * new strings in the dictionary only for unmatched strings or for short - * matches. It is used only for the fast compression options. - */ -local block_state deflate_fast(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head = NIL; /* head of the hash chain */ - int bflush; /* set if current block must be flushed */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - * At this point we have always match_length < MIN_MATCH - */ - if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ -#ifdef FASTEST - if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) || - (s->strategy == Z_RLE && s->strstart - hash_head == 1)) { - s->match_length = longest_match_fast (s, hash_head); - } -#else - if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { - s->match_length = longest_match (s, hash_head); - } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { - s->match_length = longest_match_fast (s, hash_head); - } -#endif - /* longest_match() or longest_match_fast() sets match_start */ - } - if (s->match_length >= MIN_MATCH) { - check_match(s, s->strstart, s->match_start, s->match_length); - - _tr_tally_dist(s, s->strstart - s->match_start, - s->match_length - MIN_MATCH, bflush); - - s->lookahead -= s->match_length; - - /* Insert new strings in the hash table only if the match length - * is not too large. This saves time but degrades compression. - */ -#ifndef FASTEST - if (s->match_length <= s->max_insert_length && - s->lookahead >= MIN_MATCH) { - s->match_length--; /* string at strstart already in table */ - do { - s->strstart++; - INSERT_STRING(s, s->strstart, hash_head); - /* strstart never exceeds WSIZE-MAX_MATCH, so there are - * always MIN_MATCH bytes ahead. - */ - } while (--s->match_length != 0); - s->strstart++; - } else -#endif - { - s->strstart += s->match_length; - s->match_length = 0; - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not - * matter since it will be recomputed at next deflate call. - */ - } - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} - -#ifndef FASTEST -/* =========================================================================== - * Same as above, but achieves better compression. We use a lazy - * evaluation for matches: a match is finally adopted only if there is - * no better match at the next window position. - */ -local block_state deflate_slow(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head = NIL; /* head of hash chain */ - int bflush; /* set if current block must be flushed */ - - /* Process the input block. */ - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - */ - s->prev_length = s->match_length, s->prev_match = s->match_start; - s->match_length = MIN_MATCH-1; - - if (hash_head != NIL && s->prev_length < s->max_lazy_match && - s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ - if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { - s->match_length = longest_match (s, hash_head); - } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { - s->match_length = longest_match_fast (s, hash_head); - } - /* longest_match() or longest_match_fast() sets match_start */ - - if (s->match_length <= 5 && (s->strategy == Z_FILTERED -#if TOO_FAR <= 32767 - || (s->match_length == MIN_MATCH && - s->strstart - s->match_start > TOO_FAR) -#endif - )) { - - /* If prev_match is also MIN_MATCH, match_start is garbage - * but we will ignore the current match anyway. - */ - s->match_length = MIN_MATCH-1; - } - } - /* If there was a match at the previous step and the current - * match is not better, output the previous match: - */ - if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { - uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; - /* Do not insert strings in hash table beyond this. */ - - check_match(s, s->strstart-1, s->prev_match, s->prev_length); - - _tr_tally_dist(s, s->strstart -1 - s->prev_match, - s->prev_length - MIN_MATCH, bflush); - - /* Insert in hash table all strings up to the end of the match. - * strstart-1 and strstart are already inserted. If there is not - * enough lookahead, the last two strings are not inserted in - * the hash table. - */ - s->lookahead -= s->prev_length-1; - s->prev_length -= 2; - do { - if (++s->strstart <= max_insert) { - INSERT_STRING(s, s->strstart, hash_head); - } - } while (--s->prev_length != 0); - s->match_available = 0; - s->match_length = MIN_MATCH-1; - s->strstart++; - - if (bflush) FLUSH_BLOCK(s, 0); - - } else if (s->match_available) { - /* If there was no match at the previous position, output a - * single literal. If there was a match but the current match - * is longer, truncate the previous match to a single literal. - */ - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally_lit(s, s->window[s->strstart-1], bflush); - if (bflush) { - FLUSH_BLOCK_ONLY(s, 0); - } - s->strstart++; - s->lookahead--; - if (s->strm->avail_out == 0) return need_more; - } else { - /* There is no previous match to compare with, wait for - * the next step to decide. - */ - s->match_available = 1; - s->strstart++; - s->lookahead--; - } - } - Assert (flush != Z_NO_FLUSH, "no flush?"); - if (s->match_available) { - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally_lit(s, s->window[s->strstart-1], bflush); - s->match_available = 0; - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} -#endif /* FASTEST */ - -#if 0 -/* =========================================================================== - * For Z_RLE, simply look for runs of bytes, generate matches only of distance - * one. Do not maintain a hash table. (It will be regenerated if this run of - * deflate switches away from Z_RLE.) - */ -local block_state deflate_rle(s, flush) - deflate_state *s; - int flush; -{ - int bflush; /* set if current block must be flushed */ - uInt run; /* length of run */ - uInt max; /* maximum length of run */ - uInt prev; /* byte at distance one to match */ - Bytef *scan; /* scan for end of run */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the longest encodable run. - */ - if (s->lookahead < MAX_MATCH) { - fill_window(s); - if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* See how many times the previous byte repeats */ - run = 0; - if (s->strstart > 0) { /* if there is a previous byte, that is */ - max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH; - scan = s->window + s->strstart - 1; - prev = *scan++; - do { - if (*scan++ != prev) - break; - } while (++run < max); - } - - /* Emit match if have run of MIN_MATCH or longer, else emit literal */ - if (run >= MIN_MATCH) { - check_match(s, s->strstart, s->strstart - 1, run); - _tr_tally_dist(s, 1, run - MIN_MATCH, bflush); - s->lookahead -= run; - s->strstart += run; - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} -#endif Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c (nonexistent) @@ -1,84 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ - -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include -#include -#include - -struct zchdr { - uint_t zch_magic; - uint_t zch_size; -}; - -#define ZCH_MAGIC 0x3cc13cc1 - -/*ARGSUSED*/ -void * -zcalloc(void *opaque, uint_t items, uint_t size) -{ - size_t nbytes = sizeof (struct zchdr) + items * size; - struct zchdr *z = kobj_zalloc(nbytes, KM_NOWAIT|KM_TMP); - - if (z == NULL) - return (NULL); - - z->zch_magic = ZCH_MAGIC; - z->zch_size = nbytes; - - return (z + 1); -} - -/*ARGSUSED*/ -void -zcfree(void *opaque, void *ptr) -{ - struct zchdr *z = ((struct zchdr *)ptr) - 1; - - if (z->zch_magic != ZCH_MAGIC) - panic("zcfree region corrupt: hdr=%p ptr=%p", (void *)z, ptr); - - kobj_free(z, z->zch_size); -} - -void -zmemcpy(void *dest, const void *source, uint_t len) -{ - bcopy(source, dest, len); -} - -int -zmemcmp(const void *s1, const void *s2, uint_t len) -{ - return (bcmp(s1, s2, len)); -} - -void -zmemzero(void *dest, uint_t len) -{ - bzero(dest, len); -} Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c (nonexistent) @@ -1,331 +0,0 @@ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zutil.h" -#include "inftrees.h" - -#define MAXBITS 15 - -static const char inflate_copyright[] = - " inflate 1.2.3 Copyright 1995-2005 Mark Adler "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* - Build a set of tables to decode the provided canonical Huffman code. - The code lengths are lens[0..codes-1]. The result starts at *table, - whose indices are 0..2^bits-1. work is a writable array of at least - lens shorts, which is used as a work area. type is the type of code - to be generated, CODES, LENS, or DISTS. On return, zero is success, - -1 is an invalid code, and +1 means that ENOUGH isn't enough. table - on return points to the next available entry's address. bits is the - requested root table index bits, and on return it is the actual root - table index bits. It will differ if the request is greater than the - longest code or if it is less than the shortest code. - */ -int inflate_table(type, lens, codes, table, bits, work) -codetype type; -unsigned short FAR *lens; -unsigned codes; -code FAR * FAR *table; -unsigned FAR *bits; -unsigned short FAR *work; -{ - unsigned len; /* a code's length in bits */ - unsigned sym; /* index of code symbols */ - unsigned min, max; /* minimum and maximum code lengths */ - unsigned root; /* number of index bits for root table */ - unsigned curr; /* number of index bits for current table */ - unsigned drop; /* code bits to drop for sub-table */ - int left; /* number of prefix codes available */ - unsigned used; /* code entries in table used */ - unsigned huff; /* Huffman code */ - unsigned incr; /* for incrementing code, index */ - unsigned fill; /* index for replicating entries */ - unsigned low; /* low bits for current root entry */ - unsigned mask; /* mask for low root bits */ - code this; /* table entry for duplication */ - code FAR *next; /* next available space in table */ - const unsigned short FAR *base; /* base value table to use */ - const unsigned short FAR *extra; /* extra bits table to use */ - int end; /* use base and extra for symbol > end */ - unsigned short count[MAXBITS+1]; /* number of codes of each length */ - unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ - static const unsigned short lbase[31] = { /* Length codes 257..285 base */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - static const unsigned short lext[31] = { /* Length codes 257..285 extra */ - 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, - 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; - static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577, 0, 0}; - static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ - 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, - 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, - 28, 28, 29, 29, 64, 64}; - - /* - Process a set of code lengths to create a canonical Huffman code. The - code lengths are lens[0..codes-1]. Each length corresponds to the - symbols 0..codes-1. The Huffman code is generated by first sorting the - symbols by length from short to long, and retaining the symbol order - for codes with equal lengths. Then the code starts with all zero bits - for the first code of the shortest length, and the codes are integer - increments for the same length, and zeros are appended as the length - increases. For the deflate format, these bits are stored backwards - from their more natural integer increment ordering, and so when the - decoding tables are built in the large loop below, the integer codes - are incremented backwards. - - This routine assumes, but does not check, that all of the entries in - lens[] are in the range 0..MAXBITS. The caller must assure this. - 1..MAXBITS is interpreted as that code length. zero means that that - symbol does not occur in this code. - - The codes are sorted by computing a count of codes for each length, - creating from that a table of starting indices for each length in the - sorted table, and then entering the symbols in order in the sorted - table. The sorted table is work[], with that space being provided by - the caller. - - The length counts are used for other purposes as well, i.e. finding - the minimum and maximum length codes, determining if there are any - codes at all, checking for a valid set of lengths, and looking ahead - at length counts to determine sub-table sizes when building the - decoding tables. - */ - - /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ - for (len = 0; len <= MAXBITS; len++) - count[len] = 0; - for (sym = 0; sym < codes; sym++) - count[lens[sym]]++; - - /* bound code lengths, force root to be within code lengths */ - root = *bits; - for (max = MAXBITS; max >= 1; max--) - if (count[max] != 0) break; - if (root > max) root = max; - if (max == 0) { /* no symbols to code at all */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)1; - this.val = (unsigned short)0; - *(*table)++ = this; /* make a table to force an error */ - *(*table)++ = this; - *bits = 1; - return 0; /* no symbols, but wait for decoding to report error */ - } - for (min = 1; min <= MAXBITS; min++) - if (count[min] != 0) break; - if (root < min) root = min; - - /* check for an over-subscribed or incomplete set of lengths */ - left = 1; - for (len = 1; len <= MAXBITS; len++) { - left <<= 1; - left -= count[len]; - if (left < 0) return -1; /* over-subscribed */ - } - if (left > 0 && (type == CODES || max != 1)) - return -1; /* incomplete set */ - - /* generate offsets into symbol table for each length for sorting */ - offs[1] = 0; - for (len = 1; len < MAXBITS; len++) - offs[len + 1] = offs[len] + count[len]; - - /* sort symbols by length, by symbol order within each length */ - for (sym = 0; sym < codes; sym++) - if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; - - /* - Create and fill in decoding tables. In this loop, the table being - filled is at next and has curr index bits. The code being used is huff - with length len. That code is converted to an index by dropping drop - bits off of the bottom. For codes where len is less than drop + curr, - those top drop + curr - len bits are incremented through all values to - fill the table with replicated entries. - - root is the number of index bits for the root table. When len exceeds - root, sub-tables are created pointed to by the root entry with an index - of the low root bits of huff. This is saved in low to check for when a - new sub-table should be started. drop is zero when the root table is - being filled, and drop is root when sub-tables are being filled. - - When a new sub-table is needed, it is necessary to look ahead in the - code lengths to determine what size sub-table is needed. The length - counts are used for this, and so count[] is decremented as codes are - entered in the tables. - - used keeps track of how many table entries have been allocated from the - provided *table space. It is checked when a LENS table is being made - against the space in *table, ENOUGH, minus the maximum space needed by - the worst case distance code, MAXD. This should never happen, but the - sufficiency of ENOUGH has not been proven exhaustively, hence the check. - This assumes that when type == LENS, bits == 9. - - sym increments through all symbols, and the loop terminates when - all codes of length max, i.e. all codes, have been processed. This - routine permits incomplete codes, so another loop after this one fills - in the rest of the decoding tables with invalid code markers. - */ - - /* set up for code type */ - switch (type) { - case CODES: - base = extra = work; /* dummy value--not used */ - end = 19; - break; - case LENS: - base = lbase; - base -= 257; - extra = lext; - extra -= 257; - end = 256; - break; - default: /* DISTS */ - base = dbase; - extra = dext; - end = -1; - } - - /* initialize state for loop */ - huff = 0; /* starting code */ - sym = 0; /* starting code symbol */ - len = min; /* starting code length */ - next = *table; /* current table to fill in */ - curr = root; /* current table index bits */ - drop = 0; /* current bits to drop from code for index */ - low = (unsigned)(-1); /* trigger new sub-table when len > root */ - used = 1U << root; /* use root table entries */ - mask = used - 1; /* mask for comparing low */ - - /* check available table space */ - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* process all codes and make table entries */ - for (;;) { - /* create table entry */ - this.bits = (unsigned char)(len - drop); - if ((int)(work[sym]) < end) { - this.op = (unsigned char)0; - this.val = work[sym]; - } - else if ((int)(work[sym]) > end) { - this.op = (unsigned char)(extra[work[sym]]); - this.val = base[work[sym]]; - } - else { - this.op = (unsigned char)(32 + 64); /* end of block */ - this.val = 0; - } - - /* replicate for those indices with low len bits equal to huff */ - incr = 1U << (len - drop); - fill = 1U << curr; - min = fill; /* save offset to next table */ - do { - fill -= incr; - next[(huff >> drop) + fill] = this; - } while (fill != 0); - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - - /* go to next symbol, update count, len */ - sym++; - if (--(count[len]) == 0) { - if (len == max) break; - len = lens[work[sym]]; - } - - /* create new sub-table if needed */ - if (len > root && (huff & mask) != low) { - /* if first time, transition to sub-tables */ - if (drop == 0) - drop = root; - - /* increment past last table */ - next += min; /* here min is 1 << curr */ - - /* determine length of next table */ - curr = len - drop; - left = (int)(1 << curr); - while (curr + drop < max) { - left -= count[curr + drop]; - if (left <= 0) break; - curr++; - left <<= 1; - } - - /* check for enough space */ - used += 1U << curr; - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* point entry in root table to sub-table */ - low = huff & mask; - (*table)[low].op = (unsigned char)curr; - (*table)[low].bits = (unsigned char)root; - (*table)[low].val = (unsigned short)(next - *table); - } - } - - /* - Fill in rest of table for incomplete codes. This loop is similar to the - loop above in incrementing huff for table indices. It is assumed that - len is equal to curr + drop, so there is no loop needed to increment - through high index bits. When the current sub-table is filled, the loop - drops back to the root table to fill in any remaining entries there. - */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)(len - drop); - this.val = (unsigned short)0; - while (huff != 0) { - /* when done with sub-table, drop back to root table */ - if (drop != 0 && (huff & mask) != low) { - drop = 0; - len = root; - next = *table; - this.bits = (unsigned char)len; - } - - /* put invalid code marker in table */ - next[huff >> drop] = this; - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - } - - /* set return parameters */ - *table += used; - *bits = root; - return 0; -} Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c (nonexistent) @@ -1,324 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zutil.h" - -#ifndef NO_DUMMY_DECL -struct internal_state {int dummy;}; /* for buggy compilers */ -#endif - -const char * const z_errmsg[10] = { -"need dictionary", /* Z_NEED_DICT 2 */ -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -"incompatible version",/* Z_VERSION_ERROR (-6) */ -""}; - - -const char * ZEXPORT zlibVersion() -{ - return ZLIB_VERSION; -} - -uLong ZEXPORT zlibCompileFlags() -{ - uLong flags; - - flags = 0; - switch (sizeof(uInt)) { - case 2: break; - case 4: flags += 1; break; - case 8: flags += 2; break; - default: flags += 3; - } - switch (sizeof(uLong)) { - case 2: break; - case 4: flags += 1 << 2; break; - case 8: flags += 2 << 2; break; - default: flags += 3 << 2; - } - switch (sizeof(voidpf)) { - case 2: break; - case 4: flags += 1 << 4; break; - case 8: flags += 2 << 4; break; - default: flags += 3 << 4; - } - switch (sizeof(z_off_t)) { - case 2: break; - case 4: flags += 1 << 6; break; - case 8: flags += 2 << 6; break; - default: flags += 3 << 6; - } -#ifdef DEBUG - flags += 1 << 8; -#endif -#if defined(ASMV) || defined(ASMINF) - flags += 1 << 9; -#endif -#ifdef ZLIB_WINAPI - flags += 1 << 10; -#endif -#ifdef BUILDFIXED - flags += 1 << 12; -#endif -#ifdef DYNAMIC_CRC_TABLE - flags += 1 << 13; -#endif -#ifdef NO_GZCOMPRESS - flags += 1L << 16; -#endif -#ifdef NO_GZIP - flags += 1L << 17; -#endif -#ifdef PKZIP_BUG_WORKAROUND - flags += 1L << 20; -#endif -#ifdef FASTEST - flags += 1L << 21; -#endif -#ifdef STDC -# ifdef NO_vsnprintf - flags += 1L << 25; -# ifdef HAS_vsprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_vsnprintf_void - flags += 1L << 26; -# endif -# endif -#else - flags += 1L << 24; -# ifdef NO_snprintf - flags += 1L << 25; -# ifdef HAS_sprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_snprintf_void - flags += 1L << 26; -# endif -# endif -#endif - return flags; -} - -#ifdef DEBUG - -# ifndef verbose -# define verbose 0 -# endif -int z_verbose = verbose; - -void z_error (m) - char *m; -{ - fprintf(stderr, "%s\n", m); - exit(1); -} -#endif - -/* exported to allow conversion of error code to string for compress() and - * uncompress() - */ -const char * ZEXPORT zError(err) - int err; -{ - return ERR_MSG(err); -} - -#if defined(_WIN32_WCE) - /* The Microsoft C Run-Time Library for Windows CE doesn't have - * errno. We define it as a global variable to simplify porting. - * Its value is always 0 and should not be used. - */ - int errno = 0; -#endif - -#define HAVE_MEMCPY -#ifndef HAVE_MEMCPY - -void zmemcpy(dest, source, len) - Bytef* dest; - const Bytef* source; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = *source++; /* ??? to be unrolled */ - } while (--len != 0); -} - -int zmemcmp(s1, s2, len) - const Bytef* s1; - const Bytef* s2; - uInt len; -{ - uInt j; - - for (j = 0; j < len; j++) { - if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; - } - return 0; -} - -void zmemzero(dest, len) - Bytef* dest; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = 0; /* ??? to be unrolled */ - } while (--len != 0); -} -#endif - - -#ifdef SYS16BIT - -#ifdef __TURBOC__ -/* Turbo C in 16-bit mode */ - -# define MY_ZCALLOC - -/* Turbo C malloc() does not allow dynamic allocation of 64K bytes - * and farmalloc(64K) returns a pointer with an offset of 8, so we - * must fix the pointer. Warning: the pointer must be put back to its - * original form in order to free it, use zcfree(). - */ - -#define MAX_PTR 10 -/* 10*64K = 640K */ - -local int next_ptr = 0; - -typedef struct ptr_table_s { - voidpf org_ptr; - voidpf new_ptr; -} ptr_table; - -local ptr_table table[MAX_PTR]; -/* This table is used to remember the original form of pointers - * to large buffers (64K). Such pointers are normalized with a zero offset. - * Since MSDOS is not a preemptive multitasking OS, this table is not - * protected from concurrent access. This hack doesn't work anyway on - * a protected system like OS/2. Use Microsoft C instead. - */ - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - voidpf buf = opaque; /* just to make some compilers happy */ - ulg bsize = (ulg)items*size; - - /* If we allocate less than 65520 bytes, we assume that farmalloc - * will return a usable pointer which doesn't have to be normalized. - */ - if (bsize < 65520L) { - buf = farmalloc(bsize); - if (*(ush*)&buf != 0) return buf; - } else { - buf = farmalloc(bsize + 16L); - } - if (buf == NULL || next_ptr >= MAX_PTR) return NULL; - table[next_ptr].org_ptr = buf; - - /* Normalize the pointer to seg:0 */ - *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; - *(ush*)&buf = 0; - table[next_ptr++].new_ptr = buf; - return buf; -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - int n; - if (*(ush*)&ptr != 0) { /* object < 64K */ - farfree(ptr); - return; - } - /* Find the original pointer */ - for (n = 0; n < next_ptr; n++) { - if (ptr != table[n].new_ptr) continue; - - farfree(table[n].org_ptr); - while (++n < next_ptr) { - table[n-1] = table[n]; - } - next_ptr--; - return; - } - ptr = opaque; /* just to make some compilers happy */ - Assert(0, "zcfree: ptr not found"); -} - -#endif /* __TURBOC__ */ - - -#ifdef M_I86 -/* Microsoft C in 16-bit mode */ - -# define MY_ZCALLOC - -#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) -# define _halloc halloc -# define _hfree hfree -#endif - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - return _halloc((long)items, size); -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - _hfree(ptr); -} - -#endif /* M_I86 */ - -#endif /* SYS16BIT */ - - -#ifndef MY_ZCALLOC /* Any system without a special alloc function */ - -#ifndef STDC -extern voidp malloc OF((uInt size)); -extern voidp calloc OF((uInt items, uInt size)); -extern void free OF((voidpf ptr)); -#endif - -voidpf zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; -{ - if (opaque) items += size - size; /* make compiler happy */ - return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : - (voidpf)calloc(items, size); -} - -void zcfree (opaque, ptr) - voidpf opaque; - voidpf ptr; -{ - free(ptr); - if (opaque) return; /* make compiler happy */ -} - -#endif /* MY_ZCALLOC */ Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c (nonexistent) @@ -1,1395 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* inflate.c -- zlib decompression - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* - * Change history: - * - * 1.2.beta0 24 Nov 2002 - * - First version -- complete rewrite of inflate to simplify code, avoid - * creation of window when not needed, minimize use of window when it is - * needed, make inffast.c even faster, implement gzip decoding, and to - * improve code readability and style over the previous zlib inflate code - * - * 1.2.beta1 25 Nov 2002 - * - Use pointers for available input and output checking in inffast.c - * - Remove input and output counters in inffast.c - * - Change inffast.c entry and loop from avail_in >= 7 to >= 6 - * - Remove unnecessary second byte pull from length extra in inffast.c - * - Unroll direct copy to three copies per loop in inffast.c - * - * 1.2.beta2 4 Dec 2002 - * - Change external routine names to reduce potential conflicts - * - Correct filename to inffixed.h for fixed tables in inflate.c - * - Make hbuf[] unsigned char to match parameter type in inflate.c - * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset) - * to avoid negation problem on Alphas (64 bit) in inflate.c - * - * 1.2.beta3 22 Dec 2002 - * - Add comments on state->bits assertion in inffast.c - * - Add comments on op field in inftrees.h - * - Fix bug in reuse of allocated window after inflateReset() - * - Remove bit fields--back to byte structure for speed - * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths - * - Change post-increments to pre-increments in inflate_fast(), PPC biased? - * - Add compile time option, POSTINC, to use post-increments instead (Intel?) - * - Make MATCH copy in inflate() much faster for when inflate_fast() not used - * - Use local copies of stream next and avail values, as well as local bit - * buffer and bit count in inflate()--for speed when inflate_fast() not used - * - * 1.2.beta4 1 Jan 2003 - * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings - * - Move a comment on output buffer sizes from inffast.c to inflate.c - * - Add comments in inffast.c to introduce the inflate_fast() routine - * - Rearrange window copies in inflate_fast() for speed and simplification - * - Unroll last copy for window match in inflate_fast() - * - Use local copies of window variables in inflate_fast() for speed - * - Pull out common write == 0 case for speed in inflate_fast() - * - Make op and len in inflate_fast() unsigned for consistency - * - Add FAR to lcode and dcode declarations in inflate_fast() - * - Simplified bad distance check in inflate_fast() - * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new - * source file infback.c to provide a call-back interface to inflate for - * programs like gzip and unzip -- uses window as output buffer to avoid - * window copying - * - * 1.2.beta5 1 Jan 2003 - * - Improved inflateBack() interface to allow the caller to provide initial - * input in strm. - * - Fixed stored blocks bug in inflateBack() - * - * 1.2.beta6 4 Jan 2003 - * - Added comments in inffast.c on effectiveness of POSTINC - * - Typecasting all around to reduce compiler warnings - * - Changed loops from while (1) or do {} while (1) to for (;;), again to - * make compilers happy - * - Changed type of window in inflateBackInit() to unsigned char * - * - * 1.2.beta7 27 Jan 2003 - * - Changed many types to unsigned or unsigned short to avoid warnings - * - Added inflateCopy() function - * - * 1.2.0 9 Mar 2003 - * - Changed inflateBack() interface to provide separate opaque descriptors - * for the in() and out() functions - * - Changed inflateBack() argument and in_func typedef to swap the length - * and buffer address return values for the input function - * - Check next_in and next_out for Z_NULL on entry to inflate() - * - * The history for versions after 1.2.0 are in ChangeLog in zlib distribution. - */ - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -#ifdef MAKEFIXED -# ifndef BUILDFIXED -# define BUILDFIXED -# endif -#endif - -/* function prototypes */ -local void fixedtables OF((struct inflate_state FAR *state)); -local int updatewindow OF((z_streamp strm, unsigned out)); -#ifdef BUILDFIXED - void makefixed OF((void)); -#endif -local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf, - unsigned len)); - -int ZEXPORT inflateReset(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - strm->total_in = strm->total_out = state->total = 0; - strm->msg = Z_NULL; - strm->adler = 1; /* to support ill-conceived Java test suite */ - state->mode = HEAD; - state->last = 0; - state->havedict = 0; - state->dmax = 32768U; - state->head = Z_NULL; - state->wsize = 0; - state->whave = 0; - state->write = 0; - state->hold = 0; - state->bits = 0; - state->lencode = state->distcode = state->next = state->codes; - Tracev((stderr, "inflate: reset\n")); - return Z_OK; -} - -int ZEXPORT inflatePrime(strm, bits, value) -z_streamp strm; -int bits; -int value; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; - value &= (1L << bits) - 1; - state->hold += value << state->bits; - state->bits += bits; - return Z_OK; -} - -int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -z_streamp strm; -int windowBits; -const char *version; -int stream_size; -{ - struct inflate_state FAR *state; - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != (int)(sizeof(z_stream))) - return Z_VERSION_ERROR; - if (strm == Z_NULL) return Z_STREAM_ERROR; - strm->msg = Z_NULL; /* in case we return an error */ - if (strm->zalloc == (alloc_func)0) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; - state = (struct inflate_state FAR *) - ZALLOC(strm, 1, sizeof(struct inflate_state)); - if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); - strm->state = (struct internal_state FAR *)state; - if (windowBits < 0) { - state->wrap = 0; - windowBits = -windowBits; - } - else { - state->wrap = (windowBits >> 4) + 1; -#ifdef GUNZIP - if (windowBits < 48) windowBits &= 15; -#endif - } - if (windowBits < 8 || windowBits > 15) { - ZFREE(strm, state); - strm->state = Z_NULL; - return Z_STREAM_ERROR; - } - state->wbits = (unsigned)windowBits; - state->window = Z_NULL; - return inflateReset(strm); -} - -int ZEXPORT inflateInit_(strm, version, stream_size) -z_streamp strm; -const char *version; -int stream_size; -{ - return inflateInit2_(strm, DEF_WBITS, version, stream_size); -} - -/* - Return state with length and distance decoding tables and index sizes set to - fixed code decoding. Normally this returns fixed tables from inffixed.h. - If BUILDFIXED is defined, then instead this routine builds the tables the - first time it's called, and returns those tables the first time and - thereafter. This reduces the size of the code by about 2K bytes, in - exchange for a little execution time. However, BUILDFIXED should not be - used for threaded applications, since the rewriting of the tables and virgin - may not be thread-safe. - */ -local void fixedtables(state) -struct inflate_state FAR *state; -{ -#ifdef BUILDFIXED - static int virgin = 1; - static code *lenfix, *distfix; - static code fixed[544]; - - /* build fixed huffman tables if first call (may not be thread safe) */ - if (virgin) { - unsigned sym, bits; - static code *next; - - /* literal/length table */ - sym = 0; - while (sym < 144) state->lens[sym++] = 8; - while (sym < 256) state->lens[sym++] = 9; - while (sym < 280) state->lens[sym++] = 7; - while (sym < 288) state->lens[sym++] = 8; - next = fixed; - lenfix = next; - bits = 9; - inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); - - /* distance table */ - sym = 0; - while (sym < 32) state->lens[sym++] = 5; - distfix = next; - bits = 5; - inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); - - /* do this just once */ - virgin = 0; - } -#else /* !BUILDFIXED */ -# include "inffixed.h" -#endif /* BUILDFIXED */ - state->lencode = lenfix; - state->lenbits = 9; - state->distcode = distfix; - state->distbits = 5; -} - -#ifdef MAKEFIXED -#include - -/* - Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also - defines BUILDFIXED, so the tables are built on the fly. makefixed() writes - those tables to stdout, which would be piped to inffixed.h. A small program - can simply call makefixed to do this: - - void makefixed(void); - - int main(void) - { - makefixed(); - return 0; - } - - Then that can be linked with zlib built with MAKEFIXED defined and run: - - a.out > inffixed.h - */ -void makefixed() -{ - unsigned low, size; - struct inflate_state state; - - fixedtables(&state); - puts(" /* inffixed.h -- table for decoding fixed codes"); - puts(" * Generated automatically by makefixed()."); - puts(" */"); - puts(""); - puts(" /* WARNING: this file should *not* be used by applications."); - puts(" It is part of the implementation of this library and is"); - puts(" subject to change. Applications should only use zlib.h."); - puts(" */"); - puts(""); - size = 1U << 9; - printf(" static const code lenfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 7) == 0) printf("\n "); - printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits, - state.lencode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); - size = 1U << 5; - printf("\n static const code distfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 6) == 0) printf("\n "); - printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, - state.distcode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); -} -#endif /* MAKEFIXED */ - -/* - Update the window with the last wsize (normally 32K) bytes written before - returning. If window does not exist yet, create it. This is only called - when a window is already in use, or when output has been written during this - inflate call, but the end of the deflate stream has not been reached yet. - It is also called to create a window for dictionary data when a dictionary - is loaded. - - Providing output buffers larger than 32K to inflate() should provide a speed - advantage, since only the last 32K of output is copied to the sliding window - upon return from inflate(), and since all distances after the first 32K of - output will fall in the output data, making match copies simpler and faster. - The advantage may be dependent on the size of the processor's data caches. - */ -local int updatewindow(strm, out) -z_streamp strm; -unsigned out; -{ - struct inflate_state FAR *state; - unsigned copy, dist; - - state = (struct inflate_state FAR *)strm->state; - - /* if it hasn't been done already, allocate space for the window */ - if (state->window == Z_NULL) { - state->window = (unsigned char FAR *) - ZALLOC(strm, 1U << state->wbits, - sizeof(unsigned char)); - if (state->window == Z_NULL) return 1; - } - - /* if window not in use yet, initialize */ - if (state->wsize == 0) { - state->wsize = 1U << state->wbits; - state->write = 0; - state->whave = 0; - } - - /* copy state->wsize or less output bytes into the circular window */ - copy = out - strm->avail_out; - if (copy >= state->wsize) { - zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); - state->write = 0; - state->whave = state->wsize; - } - else { - dist = state->wsize - state->write; - if (dist > copy) dist = copy; - zmemcpy(state->window + state->write, strm->next_out - copy, dist); - copy -= dist; - if (copy) { - zmemcpy(state->window, strm->next_out - copy, copy); - state->write = copy; - state->whave = state->wsize; - } - else { - state->write += dist; - if (state->write == state->wsize) state->write = 0; - if (state->whave < state->wsize) state->whave += dist; - } - } - return 0; -} - -/* Macros for inflate(): */ - -/* check function to use adler32() for zlib or crc32() for gzip */ -#ifdef GUNZIP -# define UPDATE(check, buf, len) \ - (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) -#else -# define UPDATE(check, buf, len) adler32(check, buf, len) -#endif - -/* check macros for header crc */ -#ifdef GUNZIP -# define CRC2(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - check = crc32(check, hbuf, 2); \ - } while (0) - -# define CRC4(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - hbuf[2] = (unsigned char)((word) >> 16); \ - hbuf[3] = (unsigned char)((word) >> 24); \ - check = crc32(check, hbuf, 4); \ - } while (0) -#endif - -/* Load registers with state in inflate() for speed */ -#define LOAD() \ - do { \ - put = strm->next_out; \ - left = strm->avail_out; \ - next = strm->next_in; \ - have = strm->avail_in; \ - hold = state->hold; \ - bits = state->bits; \ - } while (0) - -/* Restore state from registers in inflate() */ -#define RESTORE() \ - do { \ - strm->next_out = put; \ - strm->avail_out = left; \ - strm->next_in = next; \ - strm->avail_in = have; \ - state->hold = hold; \ - state->bits = bits; \ - } while (0) - -/* Clear the input bit accumulator */ -#define INITBITS() \ - do { \ - hold = 0; \ - bits = 0; \ - } while (0) - -/* Get a byte of input into the bit accumulator, or return from inflate() - if there is no input available. */ -#define PULLBYTE() \ - do { \ - if (have == 0) goto inf_leave; \ - have--; \ - hold += (unsigned long)(*next++) << bits; \ - bits += 8; \ - } while (0) - -/* Assure that there are at least n bits in the bit accumulator. If there is - not enough available input to do that, then return from inflate(). */ -#define NEEDBITS(n) \ - do { \ - while (bits < (unsigned)(n)) \ - PULLBYTE(); \ - } while (0) - -/* Return the low n bits of the bit accumulator (n < 16) */ -#define BITS(n) \ - ((unsigned)hold & ((1U << (n)) - 1)) - -/* Remove n bits from the bit accumulator */ -#define DROPBITS(n) \ - do { \ - hold >>= (n); \ - bits -= (unsigned)(n); \ - } while (0) - -/* Remove zero to seven bits as needed to go to a byte boundary */ -#define BYTEBITS() \ - do { \ - hold >>= bits & 7; \ - bits -= bits & 7; \ - } while (0) - -/* Reverse the bytes in a 32-bit value */ -#define REVERSE(q) \ - ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ - (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) - -/* - inflate() uses a state machine to process as much input data and generate as - much output data as possible before returning. The state machine is - structured roughly as follows: - - for (;;) switch (state) { - ... - case STATEn: - if (not enough input data or output space to make progress) - return; - ... make progress ... - state = STATEm; - break; - ... - } - - so when inflate() is called again, the same case is attempted again, and - if the appropriate resources are provided, the machine proceeds to the - next state. The NEEDBITS() macro is usually the way the state evaluates - whether it can proceed or should return. NEEDBITS() does the return if - the requested bits are not available. The typical use of the BITS macros - is: - - NEEDBITS(n); - ... do something with BITS(n) ... - DROPBITS(n); - - where NEEDBITS(n) either returns from inflate() if there isn't enough - input left to load n bits into the accumulator, or it continues. BITS(n) - gives the low n bits in the accumulator. When done, DROPBITS(n) drops - the low n bits off the accumulator. INITBITS() clears the accumulator - and sets the number of available bits to zero. BYTEBITS() discards just - enough bits to put the accumulator on a byte boundary. After BYTEBITS() - and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. - - NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return - if there is no input available. The decoding of variable length codes uses - PULLBYTE() directly in order to pull just enough bytes to decode the next - code, and no more. - - Some states loop until they get enough input, making sure that enough - state information is maintained to continue the loop where it left off - if NEEDBITS() returns in the loop. For example, want, need, and keep - would all have to actually be part of the saved state in case NEEDBITS() - returns: - - case STATEw: - while (want < need) { - NEEDBITS(n); - keep[want++] = BITS(n); - DROPBITS(n); - } - state = STATEx; - case STATEx: - - As shown above, if the next state is also the next case, then the break - is omitted. - - A state may also return if there is not enough output space available to - complete that state. Those states are copying stored data, writing a - literal byte, and copying a matching string. - - When returning, a "goto inf_leave" is used to update the total counters, - update the check value, and determine whether any progress has been made - during that inflate() call in order to return the proper return code. - Progress is defined as a change in either strm->avail_in or strm->avail_out. - When there is a window, goto inf_leave will update the window with the last - output written. If a goto inf_leave occurs in the middle of decompression - and there is no window currently, goto inf_leave will create one and copy - output to the window for the next call of inflate(). - - In this implementation, the flush parameter of inflate() only affects the - return code (per zlib.h). inflate() always writes as much as possible to - strm->next_out, given the space available and the provided input--the effect - documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers - the allocation of and copying into a sliding window until necessary, which - provides the effect documented in zlib.h for Z_FINISH when the entire input - stream available. So the only thing the flush parameter actually does is: - when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it - will return Z_BUF_ERROR if it has not reached the end of the stream. - */ - -int ZEXPORT inflate(strm, flush) -z_streamp strm; -int flush; -{ - struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ - unsigned char FAR *put; /* next output */ - unsigned have, left; /* available input and output */ - unsigned long hold; /* bit buffer */ - unsigned bits; /* bits in bit buffer */ - unsigned in, out; /* save starting available input and output */ - unsigned copy; /* number of stored or match bytes to copy */ - unsigned char FAR *from; /* where to copy match bytes from */ - code this; /* current decoding table entry */ - code last; /* parent table entry */ - unsigned len; /* length to copy for repeats, bits to drop */ - int ret; /* return code */ -#ifdef GUNZIP - unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ -#endif - static const unsigned short order[19] = /* permutation of code lengths */ - {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - - if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0)) - return Z_STREAM_ERROR; - - state = (struct inflate_state FAR *)strm->state; - if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ - LOAD(); - in = have; - out = left; - ret = Z_OK; - for (;;) - switch (state->mode) { - case HEAD: - if (state->wrap == 0) { - state->mode = TYPEDO; - break; - } - NEEDBITS(16); -#ifdef GUNZIP - if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ - state->check = crc32(0L, Z_NULL, 0); - CRC2(state->check, hold); - INITBITS(); - state->mode = FLAGS; - break; - } - state->flags = 0; /* expect zlib header */ - if (state->head != Z_NULL) - state->head->done = -1; - if (!(state->wrap & 1) || /* check if zlib header allowed */ -#else - if ( -#endif - ((BITS(8) << 8) + (hold >> 8)) % 31) { - strm->msg = (char *)"incorrect header check"; - state->mode = BAD; - break; - } - if (BITS(4) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - DROPBITS(4); - len = BITS(4) + 8; - if (len > state->wbits) { - strm->msg = (char *)"invalid window size"; - state->mode = BAD; - break; - } - state->dmax = 1U << len; - Tracev((stderr, "inflate: zlib header ok\n")); - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = hold & 0x200 ? DICTID : TYPE; - INITBITS(); - break; -#ifdef GUNZIP - case FLAGS: - NEEDBITS(16); - state->flags = (int)(hold); - if ((state->flags & 0xff) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - if (state->flags & 0xe000) { - strm->msg = (char *)"unknown header flags set"; - state->mode = BAD; - break; - } - if (state->head != Z_NULL) - state->head->text = (int)((hold >> 8) & 1); - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = TIME; - /*FALLTHRU*/ - case TIME: - NEEDBITS(32); - if (state->head != Z_NULL) - state->head->time = hold; - if (state->flags & 0x0200) CRC4(state->check, hold); - INITBITS(); - state->mode = OS; - /*FALLTHRU*/ - case OS: - NEEDBITS(16); - if (state->head != Z_NULL) { - state->head->xflags = (int)(hold & 0xff); - state->head->os = (int)(hold >> 8); - } - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = EXLEN; - /*FALLTHRU*/ - case EXLEN: - if (state->flags & 0x0400) { - NEEDBITS(16); - state->length = (unsigned)(hold); - if (state->head != Z_NULL) - state->head->extra_len = (unsigned)hold; - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - } - else if (state->head != Z_NULL) - state->head->extra = Z_NULL; - state->mode = EXTRA; - /*FALLTHRU*/ - case EXTRA: - if (state->flags & 0x0400) { - copy = state->length; - if (copy > have) copy = have; - if (copy) { - if (state->head != Z_NULL && - state->head->extra != Z_NULL) { - len = state->head->extra_len - state->length; - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); - } - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - state->length -= copy; - } - if (state->length) goto inf_leave; - } - state->length = 0; - state->mode = NAME; - /*FALLTHRU*/ - case NAME: - if (state->flags & 0x0800) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->name != Z_NULL && - state->length < state->head->name_max) - state->head->name[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->name = Z_NULL; - state->length = 0; - state->mode = COMMENT; - /*FALLTHRU*/ - case COMMENT: - if (state->flags & 0x1000) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->comment != Z_NULL && - state->length < state->head->comm_max) - state->head->comment[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->comment = Z_NULL; - state->mode = HCRC; - /*FALLTHRU*/ - case HCRC: - if (state->flags & 0x0200) { - NEEDBITS(16); - if (hold != (state->check & 0xffff)) { - strm->msg = (char *)"header crc mismatch"; - state->mode = BAD; - break; - } - INITBITS(); - } - if (state->head != Z_NULL) { - state->head->hcrc = (int)((state->flags >> 9) & 1); - state->head->done = 1; - } - strm->adler = state->check = crc32(0L, Z_NULL, 0); - state->mode = TYPE; - break; -#endif - case DICTID: - NEEDBITS(32); - strm->adler = state->check = REVERSE(hold); - INITBITS(); - state->mode = DICT; - /*FALLTHRU*/ - case DICT: - if (state->havedict == 0) { - RESTORE(); - return Z_NEED_DICT; - } - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = TYPE; - /*FALLTHRU*/ - case TYPE: - if (flush == Z_BLOCK) goto inf_leave; - /*FALLTHRU*/ - case TYPEDO: - if (state->last) { - BYTEBITS(); - state->mode = CHECK; - break; - } - NEEDBITS(3); - state->last = BITS(1); - DROPBITS(1); - switch (BITS(2)) { - case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); - state->mode = STORED; - break; - case 1: /* fixed block */ - fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); - state->mode = LEN; /* decode codes */ - break; - case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); - state->mode = TABLE; - break; - case 3: - strm->msg = (char *)"invalid block type"; - state->mode = BAD; - } - DROPBITS(2); - break; - case STORED: - BYTEBITS(); /* go to byte boundary */ - NEEDBITS(32); - if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { - strm->msg = (char *)"invalid stored block lengths"; - state->mode = BAD; - break; - } - state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); - INITBITS(); - state->mode = COPY; - /*FALLTHRU*/ - case COPY: - copy = state->length; - if (copy) { - if (copy > have) copy = have; - if (copy > left) copy = left; - if (copy == 0) goto inf_leave; - zmemcpy(put, next, copy); - have -= copy; - next += copy; - left -= copy; - put += copy; - state->length -= copy; - break; - } - Tracev((stderr, "inflate: stored end\n")); - state->mode = TYPE; - break; - case TABLE: - NEEDBITS(14); - state->nlen = BITS(5) + 257; - DROPBITS(5); - state->ndist = BITS(5) + 1; - DROPBITS(5); - state->ncode = BITS(4) + 4; - DROPBITS(4); -#ifndef PKZIP_BUG_WORKAROUND - if (state->nlen > 286 || state->ndist > 30) { - strm->msg = (char *)"too many length or distance symbols"; - state->mode = BAD; - break; - } -#endif - Tracev((stderr, "inflate: table sizes ok\n")); - state->have = 0; - state->mode = LENLENS; - /*FALLTHRU*/ - case LENLENS: - while (state->have < state->ncode) { - NEEDBITS(3); - state->lens[order[state->have++]] = (unsigned short)BITS(3); - DROPBITS(3); - } - while (state->have < 19) - state->lens[order[state->have++]] = 0; - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 7; - ret = inflate_table(CODES, state->lens, 19, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid code lengths set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: code lengths ok\n")); - state->have = 0; - state->mode = CODELENS; - /*FALLTHRU*/ - case CODELENS: - while (state->have < state->nlen + state->ndist) { - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.val < 16) { - NEEDBITS(this.bits); - DROPBITS(this.bits); - state->lens[state->have++] = this.val; - } - else { - if (this.val == 16) { - NEEDBITS(this.bits + 2); - DROPBITS(this.bits); - if (state->have == 0) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - len = state->lens[state->have - 1]; - copy = 3 + BITS(2); - DROPBITS(2); - } - else if (this.val == 17) { - NEEDBITS(this.bits + 3); - DROPBITS(this.bits); - len = 0; - copy = 3 + BITS(3); - DROPBITS(3); - } - else { - NEEDBITS(this.bits + 7); - DROPBITS(this.bits); - len = 0; - copy = 11 + BITS(7); - DROPBITS(7); - } - if (state->have + copy > state->nlen + state->ndist) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - while (copy--) - state->lens[state->have++] = (unsigned short)len; - } - } - - /* handle error breaks in while */ - if (state->mode == BAD) break; - - /* build code tables */ - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 9; - ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid literal/lengths set"; - state->mode = BAD; - break; - } - state->distcode = (code const FAR *)(state->next); - state->distbits = 6; - ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, - &(state->next), &(state->distbits), state->work); - if (ret) { - strm->msg = (char *)"invalid distances set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: codes ok\n")); - state->mode = LEN; - /*FALLTHRU*/ - case LEN: - if (have >= 6 && left >= 258) { - RESTORE(); - inflate_fast(strm, out); - LOAD(); - break; - } - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.op && (this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->lencode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - state->length = (unsigned)this.val; - if ((int)(this.op) == 0) { - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - state->mode = LIT; - break; - } - if (this.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - if (this.op & 64) { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - state->extra = (unsigned)(this.op) & 15; - state->mode = LENEXT; - /*FALLTHRU*/ - case LENEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->length += BITS(state->extra); - DROPBITS(state->extra); - } - Tracevv((stderr, "inflate: length %u\n", state->length)); - state->mode = DIST; - /*FALLTHRU*/ - case DIST: - for (;;) { - this = state->distcode[BITS(state->distbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if ((this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->distcode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - if (this.op & 64) { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - state->offset = (unsigned)this.val; - state->extra = (unsigned)(this.op) & 15; - state->mode = DISTEXT; - /*FALLTHRU*/ - case DISTEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->offset += BITS(state->extra); - DROPBITS(state->extra); - } -#ifdef INFLATE_STRICT - if (state->offset > state->dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - if (state->offset > state->whave + out - left) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - Tracevv((stderr, "inflate: distance %u\n", state->offset)); - state->mode = MATCH; - /*FALLTHRU*/ - case MATCH: - if (left == 0) goto inf_leave; - copy = out - left; - if (state->offset > copy) { /* copy from window */ - copy = state->offset - copy; - if (copy > state->write) { - copy -= state->write; - from = state->window + (state->wsize - copy); - } - else - from = state->window + (state->write - copy); - if (copy > state->length) copy = state->length; - } - else { /* copy from output */ - from = put - state->offset; - copy = state->length; - } - if (copy > left) copy = left; - left -= copy; - state->length -= copy; - do { - *put++ = *from++; - } while (--copy); - if (state->length == 0) state->mode = LEN; - break; - case LIT: - if (left == 0) goto inf_leave; - *put++ = (unsigned char)(state->length); - left--; - state->mode = LEN; - break; - case CHECK: - if (state->wrap) { - NEEDBITS(32); - out -= left; - strm->total_out += out; - state->total += out; - if (out) - strm->adler = state->check = - UPDATE(state->check, put - out, out); - out = left; - if (( -#ifdef GUNZIP - state->flags ? hold : -#endif - REVERSE(hold)) != state->check) { - strm->msg = (char *)"incorrect data check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: check matches trailer\n")); - } -#ifdef GUNZIP - state->mode = LENGTH; - /*FALLTHRU*/ - case LENGTH: - if (state->wrap && state->flags) { - NEEDBITS(32); - if (hold != (state->total & 0xffffffffUL)) { - strm->msg = (char *)"incorrect length check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: length matches trailer\n")); - } -#endif - state->mode = DONE; - /*FALLTHRU*/ - case DONE: - ret = Z_STREAM_END; - goto inf_leave; - case BAD: - ret = Z_DATA_ERROR; - goto inf_leave; - case MEM: - return Z_MEM_ERROR; - case SYNC: - default: - return Z_STREAM_ERROR; - } - - /* - Return from inflate(), updating the total counts and the check value. - If there was no progress during the inflate() call, return a buffer - error. Call updatewindow() to create and/or update the window state. - Note: a memory error from inflate() is non-recoverable. - */ - inf_leave: - RESTORE(); - if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) - if (updatewindow(strm, out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - in -= strm->avail_in; - out -= strm->avail_out; - strm->total_in += in; - strm->total_out += out; - state->total += out; - if (state->wrap && out) - strm->adler = state->check = - UPDATE(state->check, strm->next_out - out, out); - strm->data_type = state->bits + (state->last ? 64 : 0) + - (state->mode == TYPE ? 128 : 0); - if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) - ret = Z_BUF_ERROR; - return ret; -} - -int ZEXPORT inflateEnd(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->window != Z_NULL) ZFREE(strm, state->window); - ZFREE(strm, strm->state); - strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} - -int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) -z_streamp strm; -const Bytef *dictionary; -uInt dictLength; -{ - struct inflate_state FAR *state; - unsigned long id; - - /* check state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->wrap != 0 && state->mode != DICT) - return Z_STREAM_ERROR; - - /* check for correct dictionary id */ - if (state->mode == DICT) { - id = adler32(0L, Z_NULL, 0); - id = adler32(id, dictionary, dictLength); - if (id != state->check) - return Z_DATA_ERROR; - } - - /* copy dictionary to window */ - if (updatewindow(strm, strm->avail_out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - if (dictLength > state->wsize) { - zmemcpy(state->window, dictionary + dictLength - state->wsize, - state->wsize); - state->whave = state->wsize; - } - else { - zmemcpy(state->window + state->wsize - dictLength, dictionary, - dictLength); - state->whave = dictLength; - } - state->havedict = 1; - Tracev((stderr, "inflate: dictionary set\n")); - return Z_OK; -} - -int ZEXPORT inflateGetHeader(strm, head) -z_streamp strm; -gz_headerp head; -{ - struct inflate_state FAR *state; - - /* check state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; - - /* save header structure */ - state->head = head; - head->done = 0; - return Z_OK; -} - -/* - Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found - or when out of input. When called, *have is the number of pattern bytes - found in order so far, in 0..3. On return *have is updated to the new - state. If on return *have equals four, then the pattern was found and the - return value is how many bytes were read including the last byte of the - pattern. If *have is less than four, then the pattern has not been found - yet and the return value is len. In the latter case, syncsearch() can be - called again with more data and the *have state. *have is initialized to - zero for the first call. - */ -local unsigned syncsearch(have, buf, len) -unsigned FAR *have; -unsigned char FAR *buf; -unsigned len; -{ - unsigned got; - unsigned next; - - got = *have; - next = 0; - while (next < len && got < 4) { - if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) - got++; - else if (buf[next]) - got = 0; - else - got = 4 - got; - next++; - } - *have = got; - return next; -} - -int ZEXPORT inflateSync(strm) -z_streamp strm; -{ - unsigned len; /* number of bytes to look at or looked at */ - unsigned long in, out; /* temporary to save total_in and total_out */ - unsigned char buf[4]; /* to restore bit buffer to byte string */ - struct inflate_state FAR *state; - - /* check parameters */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; - - /* if first time, start search in bit buffer */ - if (state->mode != SYNC) { - state->mode = SYNC; - state->hold <<= state->bits & 7; - state->bits -= state->bits & 7; - len = 0; - while (state->bits >= 8) { - buf[len++] = (unsigned char)(state->hold); - state->hold >>= 8; - state->bits -= 8; - } - state->have = 0; - (void) syncsearch(&(state->have), buf, len); - } - - /* search available input */ - len = syncsearch(&(state->have), strm->next_in, strm->avail_in); - strm->avail_in -= len; - strm->next_in += len; - strm->total_in += len; - - /* return no joy or set up to restart inflate() on a new block */ - if (state->have != 4) return Z_DATA_ERROR; - in = strm->total_in; out = strm->total_out; - (void) inflateReset(strm); - strm->total_in = in; strm->total_out = out; - state->mode = TYPE; - return Z_OK; -} - -/* - Returns true if inflate is currently at the end of a block generated by - Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP - implementation to provide an additional safety check. PPP uses - Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored - block. When decompressing, PPP checks that at the end of input packet, - inflate is waiting for these length bytes. - */ -int ZEXPORT inflateSyncPoint(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - return state->mode == STORED && state->bits == 0; -} - -int ZEXPORT inflateCopy(dest, source) -z_streamp dest; -z_streamp source; -{ - struct inflate_state FAR *state; - struct inflate_state FAR *copy; - unsigned char FAR *window; - unsigned wsize; - - /* check input */ - if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL || - source->zalloc == (alloc_func)0 || source->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)source->state; - - /* allocate space */ - copy = (struct inflate_state FAR *) - ZALLOC(source, 1, sizeof(struct inflate_state)); - if (copy == Z_NULL) return Z_MEM_ERROR; - window = Z_NULL; - if (state->window != Z_NULL) { - window = (unsigned char FAR *) - ZALLOC(source, 1U << state->wbits, sizeof(unsigned char)); - if (window == Z_NULL) { - ZFREE(source, copy); - return Z_MEM_ERROR; - } - } - - /* copy state */ - zmemcpy(dest, source, sizeof(z_stream)); - zmemcpy(copy, state, sizeof(struct inflate_state)); - if (state->lencode >= state->codes && - state->lencode <= state->codes + ENOUGH - 1) { - copy->lencode = copy->codes + (state->lencode - state->codes); - copy->distcode = copy->codes + (state->distcode - state->codes); - } - copy->next = copy->codes + (state->next - state->codes); - if (window != Z_NULL) { - wsize = 1U << state->wbits; - zmemcpy(window, state->window, wsize); - } - copy->window = window; - dest->state = (struct internal_state FAR *)copy; - return Z_OK; -} Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h (nonexistent) @@ -1,331 +0,0 @@ -/* deflate.h -- internal compression state - * Copyright (C) 1995-2004 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#ifndef _DEFLATE_H -#define _DEFLATE_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zutil.h" - -/* define NO_GZIP when compiling if you want to disable gzip header and - trailer creation by deflate(). NO_GZIP would be used to avoid linking in - the crc code when it is not needed. For shared libraries, gzip encoding - should be left enabled. */ -#ifndef NO_GZIP -# define GZIP -#endif - -/* =========================================================================== - * Internal compression state. - */ - -#define LENGTH_CODES 29 -/* number of length codes, not counting the special END_BLOCK code */ - -#define LITERALS 256 -/* number of literal bytes 0..255 */ - -#define L_CODES (LITERALS+1+LENGTH_CODES) -/* number of Literal or Length codes, including the END_BLOCK code */ - -#define D_CODES 30 -/* number of distance codes */ - -#define BL_CODES 19 -/* number of codes used to transfer the bit lengths */ - -#define HEAP_SIZE (2*L_CODES+1) -/* maximum heap size */ - -#define MAX_BITS 15 -/* All codes must not exceed MAX_BITS bits */ - -#define INIT_STATE 42 -#define EXTRA_STATE 69 -#define NAME_STATE 73 -#define COMMENT_STATE 91 -#define HCRC_STATE 103 -#define BUSY_STATE 113 -#define FINISH_STATE 666 -/* Stream status */ - - -/* Data structure describing a single value and its code string. */ -typedef struct ct_data_s { - union { - ush freq; /* frequency count */ - ush code; /* bit string */ - } fc; - union { - ush dad; /* father node in Huffman tree */ - ush len; /* length of bit string */ - } dl; -} FAR ct_data; - -#define Freq fc.freq -#define Code fc.code -#define Dad dl.dad -#define Len dl.len - -typedef struct static_tree_desc_s static_tree_desc; - -typedef struct tree_desc_s { - ct_data *dyn_tree; /* the dynamic tree */ - int max_code; /* largest code with non zero frequency */ - static_tree_desc *stat_desc; /* the corresponding static tree */ -} FAR tree_desc; - -typedef ush Pos; -typedef Pos FAR Posf; -typedef unsigned IPos; - -/* A Pos is an index in the character window. We use short instead of int to - * save space in the various tables. IPos is used only for parameter passing. - */ - -typedef struct internal_state { - z_streamp strm; /* pointer back to this zlib stream */ - int status; /* as the name implies */ - Bytef *pending_buf; /* output still pending */ - ulg pending_buf_size; /* size of pending_buf */ - Bytef *pending_out; /* next pending byte to output to the stream */ - uInt pending; /* nb of bytes in the pending buffer */ - int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - gz_headerp gzhead; /* gzip header information to write */ - uInt gzindex; /* where in extra, name, or comment */ - Byte method; /* STORED (for zip only) or DEFLATED */ - int last_flush; /* value of flush param for previous deflate call */ - - /* used by deflate.c: */ - - uInt w_size; /* LZ77 window size (32K by default) */ - uInt w_bits; /* log2(w_size) (8..16) */ - uInt w_mask; /* w_size - 1 */ - - Bytef *window; - /* Sliding window. Input bytes are read into the second half of the window, - * and move to the first half later to keep a dictionary of at least wSize - * bytes. With this organization, matches are limited to a distance of - * wSize-MAX_MATCH bytes, but this ensures that IO is always - * performed with a length multiple of the block size. Also, it limits - * the window size to 64K, which is quite useful on MSDOS. - * To do: use the user input buffer as sliding window. - */ - - ulg window_size; - /* Actual size of window: 2*wSize, except when the user input buffer - * is directly used as sliding window. - */ - - Posf *prev; - /* Link to older string with same hash index. To limit the size of this - * array to 64K, this link is maintained only for the last 32K strings. - * An index in this array is thus a window index modulo 32K. - */ - - Posf *head; /* Heads of the hash chains or NIL. */ - - uInt ins_h; /* hash index of string to be inserted */ - uInt hash_size; /* number of elements in hash table */ - uInt hash_bits; /* log2(hash_size) */ - uInt hash_mask; /* hash_size-1 */ - - uInt hash_shift; - /* Number of bits by which ins_h must be shifted at each input - * step. It must be such that after MIN_MATCH steps, the oldest - * byte no longer takes part in the hash key, that is: - * hash_shift * MIN_MATCH >= hash_bits - */ - - long block_start; - /* Window position at the beginning of the current output block. Gets - * negative when the window is moved backwards. - */ - - uInt match_length; /* length of best match */ - IPos prev_match; /* previous match */ - int match_available; /* set if previous match exists */ - uInt strstart; /* start of string to insert */ - uInt match_start; /* start of matching string */ - uInt lookahead; /* number of valid bytes ahead in window */ - - uInt prev_length; - /* Length of the best match at previous step. Matches not greater than this - * are discarded. This is used in the lazy match evaluation. - */ - - uInt max_chain_length; - /* To speed up deflation, hash chains are never searched beyond this - * length. A higher limit improves compression ratio but degrades the - * speed. - */ - - uInt max_lazy_match; - /* Attempt to find a better match only when the current match is strictly - * smaller than this value. This mechanism is used only for compression - * levels >= 4. - */ -# define max_insert_length max_lazy_match - /* Insert new strings in the hash table only if the match length is not - * greater than this length. This saves time but degrades compression. - * max_insert_length is used only for compression levels <= 3. - */ - - int level; /* compression level (1..9) */ - int strategy; /* favor or force Huffman coding*/ - - uInt good_match; - /* Use a faster search when the previous match is longer than this */ - - int nice_match; /* Stop searching when current match exceeds this */ - - /* used by trees.c: */ - /* Didn't use ct_data typedef below to supress compiler warning */ - struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ - struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ - struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ - - struct tree_desc_s l_desc; /* desc. for literal tree */ - struct tree_desc_s d_desc; /* desc. for distance tree */ - struct tree_desc_s bl_desc; /* desc. for bit length tree */ - - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ - int heap_len; /* number of elements in the heap */ - int heap_max; /* element of largest frequency */ - /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. - * The same heap array is used to build all trees. - */ - - uch depth[2*L_CODES+1]; - /* Depth of each subtree used as tie breaker for trees of equal frequency - */ - - uchf *l_buf; /* buffer for literals or lengths */ - - uInt lit_bufsize; - /* Size of match buffer for literals/lengths. There are 4 reasons for - * limiting lit_bufsize to 64K: - * - frequencies can be kept in 16 bit counters - * - if compression is not successful for the first block, all input - * data is still in the window so we can still emit a stored block even - * when input comes from standard input. (This can also be done for - * all blocks if lit_bufsize is not greater than 32K.) - * - if compression is not successful for a file smaller than 64K, we can - * even emit a stored file instead of a stored block (saving 5 bytes). - * This is applicable only for zip (not gzip or zlib). - * - creating new Huffman trees less frequently may not provide fast - * adaptation to changes in the input data statistics. (Take for - * example a binary file with poorly compressible code followed by - * a highly compressible string table.) Smaller buffer sizes give - * fast adaptation but have of course the overhead of transmitting - * trees more frequently. - * - I can't count above 4 - */ - - uInt last_lit; /* running index in l_buf */ - - ushf *d_buf; - /* Buffer for distances. To simplify the code, d_buf and l_buf have - * the same number of elements. To use different lengths, an extra flag - * array would be necessary. - */ - - ulg opt_len; /* bit length of current block with optimal trees */ - ulg static_len; /* bit length of current block with static trees */ - uInt matches; /* number of string matches in current block */ - int last_eob_len; /* bit length of EOB code for last block */ - -#ifdef DEBUG - ulg compressed_len; /* total bit length of compressed file mod 2^32 */ - ulg bits_sent; /* bit length of compressed data sent mod 2^32 */ -#endif - - ush bi_buf; - /* Output buffer. bits are inserted starting at the bottom (least - * significant bits). - */ - int bi_valid; - /* Number of valid bits in bi_buf. All bits above the last valid bit - * are always zero. - */ - -} FAR deflate_state; - -/* Output a byte on the stream. - * IN assertion: there is enough room in pending_buf. - */ -#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} - - -#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) -/* Minimum amount of lookahead, except at the end of the input file. - * See deflate.c for comments about the MIN_MATCH+1. - */ - -#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) -/* In order to simplify the code, particularly on 16 bit machines, match - * distances are limited to MAX_DIST instead of WSIZE. - */ - - /* in trees.c */ -void _tr_init OF((deflate_state *s)); -int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); -void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, - int eof)); -void _tr_align OF((deflate_state *s)); -void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len, - int eof)); - -#define d_code(dist) \ - ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)]) -/* Mapping from a distance to a distance code. dist is the distance - 1 and - * must not have side effects. _dist_code[256] and _dist_code[257] are never - * used. - */ - -#ifndef DEBUG -/* Inline versions of _tr_tally for speed: */ - -#if defined(GEN_TREES_H) || !defined(STDC) - extern uch _length_code[]; - extern uch _dist_code[]; -#else - extern const uch _length_code[]; - extern const uch _dist_code[]; -#endif - -# define _tr_tally_lit(s, c, flush) \ - { uch cc = (c); \ - s->d_buf[s->last_lit] = 0; \ - s->l_buf[s->last_lit++] = cc; \ - s->dyn_ltree[cc].Freq++; \ - flush = (s->last_lit == s->lit_bufsize-1); \ - } -# define _tr_tally_dist(s, distance, length, flush) \ - { uch len = (length); \ - ush dist = (distance); \ - s->d_buf[s->last_lit] = dist; \ - s->l_buf[s->last_lit++] = len; \ - dist--; \ - s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \ - s->dyn_dtree[d_code(dist)].Freq++; \ - flush = (s->last_lit == s->lit_bufsize-1); \ - } -#else -# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c) -# define _tr_tally_dist(s, distance, length, flush) \ - flush = _tr_tally(s, distance, length) -#endif - -#endif /* _DEFLATE_H */ Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h (nonexistent) @@ -1,57 +0,0 @@ -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* Structure for decoding tables. Each entry provides either the - information needed to do the operation requested by the code that - indexed that table entry, or it provides a pointer to another - table that indexes more bits of the code. op indicates whether - the entry is a pointer to another table, a literal, a length or - distance, an end-of-block, or an invalid code. For a table - pointer, the low four bits of op is the number of index bits of - that table. For a length or distance, the low four bits of op - is the number of extra bits to get after the code. bits is - the number of bits in this code or part of the code to drop off - of the bit buffer. val is the actual byte to output in the case - of a literal, the base length or distance, or the offset from - the current table to the next table. Each entry is four bytes. */ -typedef struct { - unsigned char op; /* operation, extra bits, table bits */ - unsigned char bits; /* bits in this part of the code */ - unsigned short val; /* offset in table or code value */ -} code; - -/* op values as set by inflate_table(): - 00000000 - literal - 0000tttt - table link, tttt != 0 is the number of table index bits - 0001eeee - length or distance, eeee is the number of extra bits - 01100000 - end of block - 01000000 - invalid code - */ - -/* Maximum size of dynamic tree. The maximum found in a long but non- - exhaustive search was 1444 code structures (852 for length/literals - and 592 for distances, the latter actually the result of an - exhaustive search). The true maximum is not known, but the value - below is more than safe. */ -#define ENOUGH 2048 -#define MAXD 592 - -/* Type of code to build for inftable() */ -typedef enum { - CODES, - LENS, - DISTS -} codetype; - -extern int inflate_table OF((codetype type, unsigned short FAR *lens, - unsigned codes, code FAR * FAR *table, - unsigned FAR *bits, unsigned short FAR *work)); Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h (nonexistent) @@ -1,274 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#ifndef _ZUTIL_H -#define _ZUTIL_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#define ZLIB_INTERNAL -#include "zlib.h" - -#ifdef STDC -# ifndef _WIN32_WCE -# include -# endif -# include -# include -#endif -#ifdef NO_ERRNO_H -# ifdef _WIN32_WCE - /* The Microsoft C Run-Time Library for Windows CE doesn't have - * errno. We define it as a global variable to simplify porting. - * Its value is always 0 and should not be used. We rename it to - * avoid conflict with other libraries that use the same workaround. - */ -# define errno z_errno -# endif - extern int errno; -#else -# ifndef _WIN32_WCE -# include -# endif -#endif - -#ifndef local -# define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -typedef unsigned char uch; -typedef uch FAR uchf; -typedef unsigned short ush; -typedef ush FAR ushf; -typedef unsigned long ulg; - -extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ -/* (size given to avoid silly warnings with Visual C++) */ - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] - -#define ERR_RETURN(strm,err) \ - return (strm->msg = (char*)ERR_MSG(err), (err)) -/* To be used only when the state is known to be valid */ - - /* common constants */ - -#ifndef DEF_WBITS -# define DEF_WBITS MAX_WBITS -#endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - -#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ - - /* target dependencies */ - -#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) -# define OS_CODE 0x00 -# if defined(__TURBOC__) || defined(__BORLANDC__) -# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) - /* Allow compilation with ANSI keywords only enabled */ - void _Cdecl farfree( void *block ); - void *_Cdecl farmalloc( unsigned long nbytes ); -# else -# include -# endif -# else /* MSC or DJGPP */ -# include -# endif -#endif - -#ifdef AMIGA -# define OS_CODE 0x01 -#endif - -#if defined(VAXC) || defined(VMS) -# define OS_CODE 0x02 -# define F_OPEN(name, mode) \ - fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") -#endif - -#if defined(ATARI) || defined(atarist) -# define OS_CODE 0x05 -#endif - -#ifdef OS2 -# define OS_CODE 0x06 -# ifdef M_I86 - #include -# endif -#endif - -#if defined(MACOS) || defined(TARGET_OS_MAC) -# define OS_CODE 0x07 -# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os -# include /* for fdopen */ -# else -# ifndef fdopen -# define fdopen(fd,mode) NULL /* No fdopen() */ -# endif -# endif -#endif - -#ifdef TOPS20 -# define OS_CODE 0x0a -#endif - -#ifdef WIN32 -# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */ -# define OS_CODE 0x0b -# endif -#endif - -#ifdef __50SERIES /* Prime/PRIMOS */ -# define OS_CODE 0x0f -#endif - -#if defined(_BEOS_) || defined(RISCOS) -# define fdopen(fd,mode) NULL /* No fdopen() */ -#endif - -#if (defined(_MSC_VER) && (_MSC_VER > 600)) -# if defined(_WIN32_WCE) -# define fdopen(fd,mode) NULL /* No fdopen() */ -# ifndef _PTRDIFF_T_DEFINED - typedef int ptrdiff_t; -# define _PTRDIFF_T_DEFINED -# endif -# else -# define fdopen(fd,type) _fdopen(fd,type) -# endif -#endif - - /* common defaults */ - -#ifndef OS_CODE -# define OS_CODE 0x03 /* assume Unix */ -#endif - -#ifndef F_OPEN -# define F_OPEN(name, mode) fopen((name), (mode)) -#endif - - /* functions */ - -#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif -#if defined(__CYGWIN__) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif -#ifndef HAVE_VSNPRINTF -# ifdef MSDOS - /* vsnprintf may exist on some MS-DOS compilers (DJGPP?), - but for now we just assume it doesn't. */ -# define NO_vsnprintf -# endif -# ifdef __TURBOC__ -# define NO_vsnprintf -# endif -# ifdef WIN32 - /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ -# if !defined(vsnprintf) && !defined(NO_vsnprintf) -# define vsnprintf _vsnprintf -# endif -# endif -# ifdef __SASC -# define NO_vsnprintf -# endif -#endif -#ifdef VMS -# define NO_vsnprintf -#endif - -#if defined(pyr) -# define NO_MEMCPY -#endif -#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) - /* Use our own functions for small and medium model with MSC <= 5.0. - * You may have to use the same strategy for Borland C (untested). - * The __SC__ check is for Symantec. - */ -# define NO_MEMCPY -#endif -#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) -# define HAVE_MEMCPY -#endif -#ifdef HAVE_MEMCPY -# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ -# define zmemcpy _fmemcpy -# define zmemcmp _fmemcmp -# define zmemzero(dest, len) _fmemset(dest, 0, len) -# else -# define zmemcpy memcpy -# define zmemcmp memcmp -# define zmemzero(dest, len) memset(dest, 0, len) -# endif -#else - extern void zmemcpy OF((void* dest, const void* source, uInt len)); - extern int zmemcmp OF((const void* s1, const void* s2, uInt len)); - extern void zmemzero OF((void* dest, uInt len)); -#endif - -/* Diagnostic functions */ -#ifdef DEBUG -# include - extern int z_verbose; - extern void z_error OF((char *m)); -# define Assert(cond,msg) {if(!(cond)) z_error(msg);} -# define Trace(x) {if (z_verbose>=0) fprintf x ;} -# define Tracev(x) {if (z_verbose>0) fprintf x ;} -# define Tracevv(x) {if (z_verbose>1) fprintf x ;} -# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} -# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - - -voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); -void zcfree OF((voidpf opaque, voidpf ptr)); - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) -#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} - -#endif /* _ZUTIL_H */ Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h (nonexistent) @@ -1,117 +0,0 @@ -/* inflate.h -- internal inflate state definition - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* define NO_GZIP when compiling if you want to disable gzip header and - trailer decoding by inflate(). NO_GZIP would be used to avoid linking in - the crc code when it is not needed. For shared libraries, gzip decoding - should be left enabled. */ -#ifndef NO_GZIP -# define GUNZIP -#endif - -/* Possible inflate modes between inflate() calls */ -typedef enum { - HEAD, /* i: waiting for magic header */ - FLAGS, /* i: waiting for method and flags (gzip) */ - TIME, /* i: waiting for modification time (gzip) */ - OS, /* i: waiting for extra flags and operating system (gzip) */ - EXLEN, /* i: waiting for extra length (gzip) */ - EXTRA, /* i: waiting for extra bytes (gzip) */ - NAME, /* i: waiting for end of file name (gzip) */ - COMMENT, /* i: waiting for end of comment (gzip) */ - HCRC, /* i: waiting for header crc (gzip) */ - DICTID, /* i: waiting for dictionary check value */ - DICT, /* waiting for inflateSetDictionary() call */ - TYPE, /* i: waiting for type bits, including last-flag bit */ - TYPEDO, /* i: same, but skip check to exit inflate on new block */ - STORED, /* i: waiting for stored size (length and complement) */ - COPY, /* i/o: waiting for input or output to copy stored block */ - TABLE, /* i: waiting for dynamic block table lengths */ - LENLENS, /* i: waiting for code length code lengths */ - CODELENS, /* i: waiting for length/lit and distance code lengths */ - LEN, /* i: waiting for length/lit code */ - LENEXT, /* i: waiting for length extra bits */ - DIST, /* i: waiting for distance code */ - DISTEXT, /* i: waiting for distance extra bits */ - MATCH, /* o: waiting for output space to copy string */ - LIT, /* o: waiting for output space to write literal */ - CHECK, /* i: waiting for 32-bit check value */ - LENGTH, /* i: waiting for 32-bit length (gzip) */ - DONE, /* finished check, done -- remain here until reset */ - BAD, /* got a data error -- remain here until reset */ - MEM, /* got an inflate() memory error -- remain here until reset */ - SYNC /* looking for synchronization bytes to restart inflate() */ -} inflate_mode; - -/* - State transitions between above modes - - - (most modes can go to the BAD or MEM mode -- not shown for clarity) - - Process header: - HEAD -> (gzip) or (zlib) - (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME - NAME -> COMMENT -> HCRC -> TYPE - (zlib) -> DICTID or TYPE - DICTID -> DICT -> TYPE - Read deflate blocks: - TYPE -> STORED or TABLE or LEN or CHECK - STORED -> COPY -> TYPE - TABLE -> LENLENS -> CODELENS -> LEN - Read deflate codes: - LEN -> LENEXT or LIT or TYPE - LENEXT -> DIST -> DISTEXT -> MATCH -> LEN - LIT -> LEN - Process trailer: - CHECK -> LENGTH -> DONE - */ - -/* state maintained between inflate() calls. Approximately 7K bytes. */ -struct inflate_state { - inflate_mode mode; /* current inflate mode */ - int last; /* true if processing last block */ - int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - int havedict; /* true if dictionary provided */ - int flags; /* gzip header method and flags (0 if zlib) */ - unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ - unsigned long check; /* protected copy of check value */ - unsigned long total; /* protected copy of output count */ - gz_headerp head; /* where to save gzip header information */ - /* sliding window */ - unsigned wbits; /* log base 2 of requested window size */ - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if needed */ - /* bit accumulator */ - unsigned long hold; /* input bit accumulator */ - unsigned bits; /* number of bits in "in" */ - /* for string and stored block copying */ - unsigned length; /* literal or length of data to copy */ - unsigned offset; /* distance back to copy string from */ - /* for table and code decoding */ - unsigned extra; /* extra bits needed */ - /* fixed and dynamic code tables */ - code const FAR *lencode; /* starting table for length/literal codes */ - code const FAR *distcode; /* starting table for distance codes */ - unsigned lenbits; /* index bits for lencode */ - unsigned distbits; /* index bits for distcode */ - /* dynamic table building */ - unsigned ncode; /* number of code length code lengths */ - unsigned nlen; /* number of length code lengths */ - unsigned ndist; /* number of distance code lengths */ - unsigned have; /* number of code lengths in lens[] */ - code FAR *next; /* next available space in codes[] */ - unsigned short lens[320]; /* temporary storage for code lengths */ - unsigned short work[288]; /* work area for code table building */ - code codes[ENOUGH]; /* space for code tables */ -}; Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c (nonexistent) @@ -1,320 +0,0 @@ -/* inffast.c -- fast decoding - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -#ifndef ASMINF - -/* Allow machine dependent optimization for post-increment or pre-increment. - Based on testing to date, - Pre-increment preferred for: - - PowerPC G3 (Adler) - - MIPS R5000 (Randers-Pehrson) - Post-increment preferred for: - - none - No measurable difference: - - Pentium III (Anderson) - - M68060 (Nikl) - */ -#ifdef POSTINC -# define OFF 0 -# define PUP(a) *(a)++ -#else -# define OFF 1 -# define PUP(a) *++(a) -#endif - -/* - Decode literal, length, and distance codes and write out the resulting - literal and match bytes until either not enough input or output is - available, an end-of-block is encountered, or a data error is encountered. - When large enough input and output buffers are supplied to inflate(), for - example, a 16K input buffer and a 64K output buffer, more than 95% of the - inflate execution time is spent in this routine. - - Entry assumptions: - - state->mode == LEN - strm->avail_in >= 6 - strm->avail_out >= 258 - start >= strm->avail_out - state->bits < 8 - - On return, state->mode is one of: - - LEN -- ran out of enough output space or enough available input - TYPE -- reached end of block code, inflate() to interpret next block - BAD -- error in block data - - Notes: - - - The maximum input bits used by a length/distance pair is 15 bits for the - length code, 5 bits for the length extra, 15 bits for the distance code, - and 13 bits for the distance extra. This totals 48 bits, or six bytes. - Therefore if strm->avail_in >= 6, then there is enough input to avoid - checking for available input while decoding. - - - The maximum bytes that a single length/distance pair can output is 258 - bytes, which is the maximum length that can be coded. inflate_fast() - requires strm->avail_out >= 258 for each loop to avoid checking for - output space. - */ -void inflate_fast(strm, start) -z_streamp strm; -unsigned start; /* inflate()'s starting value for strm->avail_out */ -{ - struct inflate_state FAR *state; - unsigned char FAR *in; /* local strm->next_in */ - unsigned char FAR *last; /* while in < last, enough input available */ - unsigned char FAR *out; /* local strm->next_out */ - unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ - unsigned char FAR *end; /* while out < end, enough space available */ -#ifdef INFLATE_STRICT - unsigned dmax; /* maximum distance from zlib header */ -#endif - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ - unsigned long hold; /* local strm->hold */ - unsigned bits; /* local strm->bits */ - code const FAR *lcode; /* local strm->lencode */ - code const FAR *dcode; /* local strm->distcode */ - unsigned lmask; /* mask for first level of length codes */ - unsigned dmask; /* mask for first level of distance codes */ - code this; /* retrieved table entry */ - unsigned op; /* code bits, operation, extra bits, or */ - /* window position, window bytes to copy */ - unsigned len; /* match length, unused bytes */ - unsigned dist; /* match distance */ - unsigned char FAR *from; /* where to copy match from */ - - /* copy state to local variables */ - state = (struct inflate_state FAR *)strm->state; - in = strm->next_in - OFF; - last = in + (strm->avail_in - 5); - out = strm->next_out - OFF; - beg = out - (start - strm->avail_out); - end = out + (strm->avail_out - 257); -#ifdef INFLATE_STRICT - dmax = state->dmax; -#endif - wsize = state->wsize; - whave = state->whave; - write = state->write; - window = state->window; - hold = state->hold; - bits = state->bits; - lcode = state->lencode; - dcode = state->distcode; - lmask = (1U << state->lenbits) - 1; - dmask = (1U << state->distbits) - 1; - - /* decode literals and length/distances until end-of-block or not enough - input data or output space */ - do { - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = lcode[hold & lmask]; - dolen: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op == 0) { /* literal */ - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - PUP(out) = (unsigned char)(this.val); - } - else if (op & 16) { /* length base */ - len = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (op) { - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - len += (unsigned)hold & ((1U << op) - 1); - hold >>= op; - bits -= op; - } - Tracevv((stderr, "inflate: length %u\n", len)); - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = dcode[hold & dmask]; - dodist: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op & 16) { /* distance base */ - dist = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - } - dist += (unsigned)hold & ((1U << op) - 1); -#ifdef INFLATE_STRICT - if (dist > dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - hold >>= op; - bits -= op; - Tracevv((stderr, "inflate: distance %u\n", dist)); - op = (unsigned)(out - beg); /* max distance in output */ - if (dist > op) { /* see if copy from window */ - op = dist - op; /* distance back in window */ - if (op > whave) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - from = window - OFF; - if (write == 0) { /* very common case */ - from += wsize - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - else if (write < op) { /* wrap around window */ - from += wsize + write - op; - op -= write; - if (op < len) { /* some from end of window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = window - OFF; - if (write < len) { /* some from start of window */ - op = write; - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - } - else { /* contiguous in window */ - from += write - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - while (len > 2) { - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - else { - from = out - dist; /* copy direct from output */ - do { /* minimum length is three */ - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } while (len > 2); - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - } - else if ((op & 64) == 0) { /* 2nd level distance code */ - this = dcode[this.val + (hold & ((1U << op) - 1))]; - goto dodist; - } - else { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - } - else if ((op & 64) == 0) { /* 2nd level length code */ - this = lcode[this.val + (hold & ((1U << op) - 1))]; - goto dolen; - } - else if (op & 32) { /* end-of-block */ - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - else { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - } while (in < last && out < end); - - /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ - len = bits >> 3; - in -= len; - bits -= len << 3; - hold &= (1U << bits) - 1; - - /* update state and return */ - strm->next_in = in + OFF; - strm->next_out = out + OFF; - strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); - strm->avail_out = (unsigned)(out < end ? - 257 + (end - out) : 257 - (out - end)); - state->hold = hold; - state->bits = bits; - return; -} - -/* - inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): - - Using bit fields for code structure - - Different op definition to avoid & for extra bits (do & for table bits) - - Three separate decoding do-loops for direct, window, and write == 0 - - Special case for distance > 1 copies to do overlapped load and store copy - - Explicit branch predictions (based on measured branch probabilities) - - Deferring match copy and interspersed it with decoding subsequent codes - - Swapping literal/length else - - Swapping window/direct else - - Larger unrolled copy loops (three is about right) - - Moving len -= 3 statement into middle of loop - */ - -#endif /* !ASMINF */ Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h (nonexistent) @@ -1,443 +0,0 @@ -/* crc32.h -- tables for rapid CRC calculation - * Generated automatically by crc32.c - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -local const unsigned long FAR crc_table[TBLS][256] = -{ - { - 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL, - 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL, - 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL, - 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL, - 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL, - 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL, - 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL, - 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL, - 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL, - 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL, - 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL, - 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL, - 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL, - 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL, - 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL, - 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL, - 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL, - 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL, - 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL, - 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL, - 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL, - 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL, - 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL, - 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL, - 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL, - 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL, - 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL, - 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL, - 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL, - 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL, - 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL, - 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL, - 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL, - 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL, - 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL, - 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL, - 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL, - 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL, - 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL, - 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL, - 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL, - 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL, - 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL, - 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL, - 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL, - 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL, - 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL, - 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL, - 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL, - 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL, - 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL, - 0x2d02ef8dUL -#ifdef BYFOUR - }, - { - 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL, - 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL, - 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL, - 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL, - 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL, - 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL, - 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL, - 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL, - 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL, - 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL, - 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL, - 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL, - 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL, - 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL, - 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL, - 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL, - 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL, - 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL, - 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL, - 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL, - 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL, - 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL, - 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL, - 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL, - 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL, - 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL, - 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL, - 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL, - 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL, - 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL, - 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL, - 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL, - 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL, - 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL, - 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL, - 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL, - 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL, - 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL, - 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL, - 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL, - 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL, - 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL, - 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL, - 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL, - 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL, - 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL, - 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL, - 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL, - 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL, - 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL, - 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL, - 0x9324fd72UL - }, - { - 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL, - 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL, - 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL, - 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL, - 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL, - 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL, - 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL, - 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL, - 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL, - 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL, - 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL, - 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL, - 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL, - 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL, - 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL, - 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL, - 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL, - 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL, - 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL, - 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL, - 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL, - 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL, - 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL, - 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL, - 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL, - 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL, - 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL, - 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL, - 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL, - 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL, - 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL, - 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL, - 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL, - 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL, - 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL, - 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL, - 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL, - 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL, - 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL, - 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL, - 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL, - 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL, - 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL, - 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL, - 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL, - 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL, - 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL, - 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL, - 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL, - 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL, - 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL, - 0xbe9834edUL - }, - { - 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL, - 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL, - 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL, - 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL, - 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL, - 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL, - 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL, - 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL, - 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL, - 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL, - 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL, - 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL, - 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL, - 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL, - 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL, - 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL, - 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL, - 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL, - 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL, - 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL, - 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL, - 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL, - 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL, - 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL, - 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL, - 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL, - 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL, - 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL, - 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL, - 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL, - 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL, - 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL, - 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL, - 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL, - 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL, - 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL, - 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL, - 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL, - 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL, - 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL, - 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL, - 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL, - 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL, - 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL, - 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL, - 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL, - 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL, - 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL, - 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL, - 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL, - 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL, - 0xde0506f1UL - }, - { - 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL, - 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL, - 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL, - 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL, - 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL, - 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL, - 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL, - 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL, - 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL, - 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL, - 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL, - 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL, - 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL, - 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL, - 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL, - 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL, - 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL, - 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL, - 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL, - 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL, - 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL, - 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL, - 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL, - 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL, - 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL, - 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL, - 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL, - 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL, - 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL, - 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL, - 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL, - 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL, - 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL, - 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL, - 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL, - 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL, - 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL, - 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL, - 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL, - 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL, - 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL, - 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL, - 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL, - 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL, - 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL, - 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL, - 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL, - 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL, - 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL, - 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL, - 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL, - 0x8def022dUL - }, - { - 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL, - 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL, - 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL, - 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL, - 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL, - 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL, - 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL, - 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL, - 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL, - 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL, - 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL, - 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL, - 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL, - 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL, - 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL, - 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL, - 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL, - 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL, - 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL, - 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL, - 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL, - 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL, - 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL, - 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL, - 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL, - 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL, - 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL, - 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL, - 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL, - 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL, - 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL, - 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL, - 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL, - 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL, - 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL, - 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL, - 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL, - 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL, - 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL, - 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL, - 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL, - 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL, - 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL, - 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL, - 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL, - 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL, - 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL, - 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL, - 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL, - 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL, - 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL, - 0x72fd2493UL - }, - { - 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL, - 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL, - 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL, - 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL, - 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL, - 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL, - 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL, - 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL, - 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL, - 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL, - 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL, - 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL, - 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL, - 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL, - 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL, - 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL, - 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL, - 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL, - 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL, - 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL, - 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL, - 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL, - 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL, - 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL, - 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL, - 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL, - 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL, - 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL, - 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL, - 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL, - 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL, - 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL, - 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL, - 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL, - 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL, - 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL, - 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL, - 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL, - 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL, - 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL, - 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL, - 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL, - 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL, - 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL, - 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL, - 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL, - 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL, - 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL, - 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL, - 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL, - 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL, - 0xed3498beUL - }, - { - 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL, - 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL, - 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL, - 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL, - 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL, - 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL, - 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL, - 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL, - 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL, - 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL, - 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL, - 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL, - 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL, - 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL, - 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL, - 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL, - 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL, - 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL, - 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL, - 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL, - 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL, - 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL, - 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL, - 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL, - 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL, - 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL, - 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL, - 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL, - 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL, - 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL, - 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL, - 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL, - 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL, - 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL, - 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL, - 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL, - 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL, - 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL, - 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL, - 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL, - 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL, - 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL, - 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL, - 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL, - 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL, - 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL, - 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL, - 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL, - 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL, - 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL, - 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL, - 0xf10605deUL -#endif - } -}; Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h (nonexistent) @@ -1,13 +0,0 @@ -/* inffast.h -- header to use inffast.c - * Copyright (C) 1995-2003 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -void inflate_fast OF((z_streamp strm, unsigned start)); Property changes on: head/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c =================================================================== --- head/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c (revision 350495) +++ head/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c (revision 350496) @@ -1,113 +1,155 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include +#include +#include +#include #include -#include "zlib.h" -#include "zutil.h" +#include +#include +struct zchdr { + uint_t zch_magic; + uint_t zch_size; +}; + +#define ZCH_MAGIC 0x3cc13cc1 + +/*ARGSUSED*/ +static void * +zfs_zcalloc(void *opaque, uint_t items, uint_t size) +{ + size_t nbytes = sizeof (struct zchdr) + items * size; + struct zchdr *z = kobj_zalloc(nbytes, KM_NOWAIT|KM_TMP); + + if (z == NULL) + return (NULL); + + z->zch_magic = ZCH_MAGIC; + z->zch_size = nbytes; + + return (z + 1); +} + +/*ARGSUSED*/ +static void +zfs_zcfree(void *opaque, void *ptr) +{ + struct zchdr *z = ((struct zchdr *)ptr) - 1; + + if (z->zch_magic != ZCH_MAGIC) + panic("zcfree region corrupt: hdr=%p ptr=%p", (void *)z, ptr); + + kobj_free(z, z->zch_size); +} + /* * Uncompress the buffer 'src' into the buffer 'dst'. The caller must store * the expected decompressed data size externally so it can be passed in. * The resulting decompressed size is then returned through dstlen. This * function return Z_OK on success, or another error code on failure. */ int z_uncompress(void *dst, size_t *dstlen, const void *src, size_t srclen) { z_stream zs; int err; bzero(&zs, sizeof (zs)); zs.next_in = (uchar_t *)src; zs.avail_in = srclen; zs.next_out = dst; zs.avail_out = *dstlen; + zs.zalloc = zfs_zcalloc; + zs.zfree = zfs_zcfree; /* * Call inflateInit2() specifying a window size of DEF_WBITS * with the 6th bit set to indicate that the compression format * type (zlib or gzip) should be automatically detected. */ if ((err = inflateInit2(&zs, DEF_WBITS | 0x20)) != Z_OK) return (err); if ((err = inflate(&zs, Z_FINISH)) != Z_STREAM_END) { (void) inflateEnd(&zs); return (err == Z_OK ? Z_BUF_ERROR : err); } *dstlen = zs.total_out; return (inflateEnd(&zs)); } int z_compress_level(void *dst, size_t *dstlen, const void *src, size_t srclen, int level) { z_stream zs; int err; bzero(&zs, sizeof (zs)); zs.next_in = (uchar_t *)src; zs.avail_in = srclen; zs.next_out = dst; zs.avail_out = *dstlen; + zs.zalloc = zfs_zcalloc; + zs.zfree = zfs_zcfree; if ((err = deflateInit(&zs, level)) != Z_OK) return (err); if ((err = deflate(&zs, Z_FINISH)) != Z_STREAM_END) { (void) deflateEnd(&zs); return (err == Z_OK ? Z_BUF_ERROR : err); } *dstlen = zs.total_out; return (deflateEnd(&zs)); } int z_compress(void *dst, size_t *dstlen, const void *src, size_t srclen) { return (z_compress_level(dst, dstlen, src, srclen, Z_DEFAULT_COMPRESSION)); } /* * Convert a zlib error code into a string error message. */ const char * z_strerror(int err) { int i = Z_NEED_DICT - err; if (i < 0 || i > Z_NEED_DICT - Z_VERSION_ERROR) return ("unknown error"); return (zError(err)); } Index: head/sys/conf/NOTES =================================================================== --- head/sys/conf/NOTES (revision 350495) +++ head/sys/conf/NOTES (revision 350496) @@ -1,2984 +1,2986 @@ # $FreeBSD$ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', # 'makeoptions', 'hints', etc. go into the kernel configuration that you # run config(8) with. # # Lines that begin with 'hint.' are NOT for config(8), they go into your # hints file. See /boot/device.hints and/or the 'hints' config(8) directive. # # Please use ``make LINT'' to create an old-style LINT file if you want to # do kernel test-builds. # # This file contains machine independent kernel configuration notes. For # machine dependent notes, look in /sys//conf/NOTES. # # # NOTES conventions and style guide: # # Large block comments should begin and end with a line containing only a # comment character. # # To describe a particular object, a block comment (if it exists) should # come first. Next should come device, options, and hints lines in that # order. All device and option lines must be described by a comment that # doesn't just expand the device or option name. Use only a concise # comment on the same line if possible. Very detailed descriptions of # devices and subsystems belong in man pages. # # A space followed by a tab separates 'options' from an option name. Two # spaces followed by a tab separate 'device' from a device name. Comments # after an option or device should use one space after the comment character. # To comment out a negative option that disables code and thus should not be # enabled for LINT builds, precede 'options' with "#!". # # # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident LINT # # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a formula defined in subr_param.c. # Omitting this parameter or setting it to 0 will cause the system to # auto-size based on physical memory. # maxusers 10 # To statically compile in device wiring instead of /boot/device.hints #hints "LINT.hints" # Default places to look for devices. # Use the following to compile in values accessible to the kernel # through getenv() (or kenv(1) in userland). The format of the file # is 'variable=value', see kenv(1) # #env "LINT.env" # # The `makeoptions' parameter allows variables to be passed to the # generated Makefile in the build area. # # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} # after most other flags. Here we use it to inhibit use of non-optimal # gcc built-in functions (e.g., memcmp). # # DEBUG happens to be magic. # The following is equivalent to 'config -g KERNELNAME' and creates # 'kernel.debug' compiled with -g debugging as well as a normal # 'kernel'. Use 'make install.debug' to install the debug kernel # but that isn't normally necessary as the debug symbols are not loaded # by the kernel and are not useful there anyway. # # KERNEL can be overridden so that you can change the default name of your # kernel. # # MODULES_OVERRIDE can be used to limit modules built to a specific list. # makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo" # Only build ext2fs module plus those parts of the sound system I need. #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3" makeoptions DESTDIR=/tmp # # FreeBSD processes are subject to certain limits to their consumption # of system resources. See getrlimit(2) for more details. Each # resource limit has two values, a "soft" limit and a "hard" limit. # The soft limits can be modified during normal system operation, but # the hard limits are set at boot time. Their default values are # in sys//include/vmparam.h. There are two ways to change them: # # 1. Set the values at kernel build time. The options below are one # way to allow that limit to grow to 1GB. They can be increased # further by changing the parameters: # # 2. In /boot/loader.conf, set the tunables kern.maxswzone, # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, # kern.dflssiz, kern.maxssiz and kern.sgrowsiz. # # The options in /boot/loader.conf override anything in the kernel # configuration file. See the function init_param1 in # sys/kern/subr_param.c for more details. # options MAXDSIZ=(1024UL*1024*1024) options MAXSSIZ=(128UL*1024*1024) options DFLDSIZ=(1024UL*1024*1024) # # BLKDEV_IOSIZE sets the default block size used in user block # device I/O. Note that this value will be overridden by the label # when specifying a block device from a label with a non-0 # partition blocksize. The default is PAGE_SIZE. # options BLKDEV_IOSIZE=8192 # # MAXPHYS and DFLTPHYS # # These are the maximal and safe 'raw' I/O block device access sizes. # Reads and writes will be split into MAXPHYS chunks for known good # devices and DFLTPHYS for the rest. Some applications have better # performance with larger raw I/O access sizes. Note that certain VM # parameters are derived from these values and making them too large # can make an unbootable kernel. # # The defaults are 64K and 128K respectively. options DFLTPHYS=(64*1024) options MAXPHYS=(128*1024) # This allows you to actually store this configuration file into # the kernel binary itself. See config(8) for more details. # options INCLUDE_CONFIG_FILE # Include this file in kernel # # Compile-time defaults for various boot parameters # options BOOTVERBOSE=1 options BOOTHOWTO=RB_MULTIPLE # # Compile-time defaults for dmesg boot tagging # # Default boot tag; may use 'kern.boot_tag' loader tunable to override. The # current boot's tag is also exposed via the 'kern.boot_tag' sysctl. options BOOT_TAG=\"\" # Maximum boot tag size the kernel's static buffer should accomodate. Maximum # size for both BOOT_TAG and the assocated tunable. options BOOT_TAG_SZ=32 options GEOM_BDE # Disk encryption. options GEOM_BSD # BSD disklabels (obsolete, gone in 12) options GEOM_CACHE # Disk cache. options GEOM_CONCAT # Disk concatenation. options GEOM_ELI # Disk encryption. options GEOM_FOX # Redundant path mitigation (obsolete, gone in 12) options GEOM_GATE # Userland services. options GEOM_JOURNAL # Journaling. options GEOM_LABEL # Providers labelization. options GEOM_LINUX_LVM # Linux LVM2 volumes options GEOM_MAP # Map based partitioning options GEOM_MBR # DOS/MBR partitioning (obsolete, gone in 12) options GEOM_MIRROR # Disk mirroring. options GEOM_MULTIPATH # Disk multipath options GEOM_NOP # Test class. options GEOM_PART_APM # Apple partitioning options GEOM_PART_BSD # BSD disklabel options GEOM_PART_BSD64 # BSD disklabel64 options GEOM_PART_EBR # Extended Boot Records options GEOM_PART_EBR_COMPAT # Backward compatible partition names options GEOM_PART_GPT # GPT partitioning options GEOM_PART_LDM # Logical Disk Manager options GEOM_PART_MBR # MBR partitioning options GEOM_PART_VTOC8 # SMI VTOC8 disk label options GEOM_RAID # Soft RAID functionality. options GEOM_RAID3 # RAID3 functionality. options GEOM_SHSEC # Shared secret. options GEOM_STRIPE # Disk striping. options GEOM_SUNLABEL # Sun/Solaris partitioning (obsolete, gone in 12) options GEOM_UZIP # Read-only compressed disks options GEOM_VINUM # Vinum logical volume manager options GEOM_VIRSTOR # Virtual storage. options GEOM_VOL # Volume names from UFS superblock (obsolete, gone in 12) options GEOM_ZERO # Performance testing helper. # # The root device and filesystem type can be compiled in; # this provides a fallback option if the root device cannot # be correctly guessed by the bootstrap code, or an override if # the RB_DFLTROOT flag (-r) is specified when booting the kernel. # options ROOTDEVNAME=\"ufs:da0s2e\" ##################################################################### # Scheduler options: # # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options # select which scheduler is compiled in. # # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run # queue and no CPU affinity which makes it suboptimal for SMP. It has very # good interactivity and priority selection. # # SCHED_ULE provides significant performance advantages over 4BSD on many # workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues # and scheduler locks. It also has a stronger notion of interactivity # which leads to better responsiveness even on uniprocessor machines. This # is the default scheduler. # # SCHED_STATS is a debugging option which keeps some stats in the sysctl # tree at 'kern.sched.stats' and is useful for debugging scheduling decisions. # options SCHED_4BSD options SCHED_STATS #options SCHED_ULE ##################################################################### # SMP OPTIONS: # # SMP enables building of a Symmetric MultiProcessor Kernel. # Mandatory: options SMP # Symmetric MultiProcessor Kernel # EARLY_AP_STARTUP releases the Application Processors earlier in the # kernel startup process (before devices are probed) rather than at the # end. This is a temporary option for use during the transition from # late to early AP startup. options EARLY_AP_STARTUP # MAXCPU defines the maximum number of CPUs that can boot in the system. # A default value should be already present, for every architecture. options MAXCPU=32 # NUMA enables use of Non-Uniform Memory Access policies in various kernel # subsystems. options NUMA # MAXMEMDOM defines the maximum number of memory domains that can boot in the # system. A default value should already be defined by every architecture. options MAXMEMDOM=2 # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin # if the thread that currently owns the mutex is executing on another # CPU. This behavior is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_MUTEXES # ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin # if the thread that currently owns the rwlock is executing on another # CPU. This behavior is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_RWLOCKS # ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that # currently owns the sx lock is executing on another CPU. # This behavior is enabled by default, so this option can be used to # disable it. options NO_ADAPTIVE_SX # MUTEX_NOINLINE forces mutex operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options MUTEX_NOINLINE # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options RWLOCK_NOINLINE # SX_NOINLINE forces sx lock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options SX_NOINLINE # SMP Debugging Options: # # CALLOUT_PROFILING enables rudimentary profiling of the callwheel data # structure used as backend in callout(9). # PREEMPTION allows the threads that are in the kernel to be preempted by # higher priority [interrupt] threads. It helps with interactivity # and allows interrupt threads to run sooner rather than waiting. # WARNING! Only tested on amd64 and i386. # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel # threads. Its sole use is to expose race conditions and other # bugs during development. Enabling this option will reduce # performance and increase the frequency of kernel panics by # design. If you aren't sure that you need it then you don't. # Relies on the PREEMPTION option. DON'T TURN THIS ON. # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table # used to hold active sleep queues as well as sleep wait message # frequency. # TURNSTILE_PROFILING enables rudimentary profiling of the hash table # used to hold active lock queues. # UMTX_PROFILING enables rudimentary profiling of the hash table used # to hold active lock queues. # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_KDB causes the witness code to drop into the kernel debugger if # a lock hierarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. options PREEMPTION options FULL_PREEMPTION options WITNESS options WITNESS_KDB options WITNESS_SKIPSPIN # LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details. options LOCK_PROFILING # Set the number of buffers and the hash size. The hash size MUST be larger # than the number of buffers. Hash size should be prime. options MPROF_BUFFERS="1536" options MPROF_HASH_SIZE="1543" # Profiling for the callout(9) backend. options CALLOUT_PROFILING # Profiling for internal hash tables. options SLEEPQUEUE_PROFILING options TURNSTILE_PROFILING options UMTX_PROFILING ##################################################################### # COMPATIBILITY OPTIONS # # Implement system calls compatible with 4.3BSD and older versions of # FreeBSD. You probably do NOT want to remove this as much current code # still relies on the 4.3 emulation. Note that some architectures that # are supported by FreeBSD do not include support for certain important # aspects of this compatibility option, namely those related to the # signal delivery mechanism. # options COMPAT_43 # Old tty interface. options COMPAT_43TTY # Note that as a general rule, COMPAT_FREEBSD depends on # COMPAT_FREEBSD, COMPAT_FREEBSD, etc. # Enable FreeBSD4 compatibility syscalls options COMPAT_FREEBSD4 # Enable FreeBSD5 compatibility syscalls options COMPAT_FREEBSD5 # Enable FreeBSD6 compatibility syscalls options COMPAT_FREEBSD6 # Enable FreeBSD7 compatibility syscalls options COMPAT_FREEBSD7 # Enable FreeBSD9 compatibility syscalls options COMPAT_FREEBSD9 # Enable FreeBSD10 compatibility syscalls options COMPAT_FREEBSD10 # Enable FreeBSD11 compatibility syscalls options COMPAT_FREEBSD11 # Enable FreeBSD12 compatibility syscalls options COMPAT_FREEBSD12 # Enable Linux Kernel Programming Interface options COMPAT_LINUXKPI # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS # # Compile with kernel debugger related code. # options KDB # # Print a stack trace of the current thread on the console for a panic. # options KDB_TRACE # # Don't enter the debugger for a panic. Intended for unattended operation # where you may want to enter the debugger from the console, but still want # the machine to recover from a panic. # options KDB_UNATTENDED # # Enable the ddb debugger backend. # options DDB # # Print the numerical value of symbols in addition to the symbolic # representation. # options DDB_NUMSYM # # Enable the remote gdb debugger backend. # options GDB # # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the # contents of the registered sysctl nodes on the console. It is disabled by # default because it generates excessively verbose console output that can # interfere with serial console operation. # options SYSCTL_DEBUG # # Enable textdump by default, this disables kernel core dumps. # options TEXTDUMP_PREFERRED # # Enable extra debug messages while performing textdumps. # options TEXTDUMP_VERBOSE # # NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the # resulting kernel. options NO_SYSCTL_DESCR # # MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9) # allocations that are smaller than a page. The purpose is to isolate # different malloc types into hash classes, so that any buffer # overruns or use-after-free will usually only affect memory from # malloc types in that hash class. This is purely a debugging tool; # by varying the hash function and tracking which hash class was # corrupted, the intersection of the hash classes from each instance # will point to a single malloc type that is being misused. At this # point inspection or memguard(9) can be used to catch the offending # code. # options MALLOC_DEBUG_MAXZONES=8 # # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator # for the kernel used to detect modify-after-free scenarios. See the # memguard(9) man page for more information on usage. # options DEBUG_MEMGUARD # # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for # malloc(9). # options DEBUG_REDZONE # # EARLY_PRINTF enables support for calling a special printf (eprintf) # very early in the kernel (before cn_init() has been called). This # should only be used for debugging purposes early in boot. Normally, # it is not defined. It is commented out here because this feature # isn't generally available. And the required eputc() isn't defined. # #options EARLY_PRINTF # # KTRACE enables the system-call tracing facility ktrace(2). To be more # SMP-friendly, KTRACE uses a worker thread to process most trace events # asynchronously to the thread generating the event. This requires a # pre-allocated store of objects representing trace events. The # KTRACE_REQUEST_POOL option specifies the initial size of this store. # The size of the pool can be adjusted both at boottime and runtime via # the kern.ktrace_request_pool tunable and sysctl. # options KTRACE #kernel tracing options KTRACE_REQUEST_POOL=101 # # KTR is a kernel tracing facility imported from BSD/OS. It is # enabled with the KTR option. KTR_ENTRIES defines the number of # entries in the circular trace buffer; it may be an arbitrary number. # KTR_BOOT_ENTRIES defines the number of entries during the early boot, # before malloc(9) is functional. # KTR_COMPILE defines the mask of events to compile into the kernel as # defined by the KTR_* constants in . KTR_MASK defines the # initial value of the ktr_mask variable which determines at runtime # what events to trace. KTR_CPUMASK determines which CPU's log # events, with bit X corresponding to CPU X. The layout of the string # passed as KTR_CPUMASK must match a series of bitmasks each of them # separated by the "," character (ie: # KTR_CPUMASK=0xAF,0xFFFFFFFFFFFFFFFF). KTR_VERBOSE enables # dumping of KTR events to the console by default. This functionality # can be toggled via the debug.ktr_verbose sysctl and defaults to off # if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details. # options KTR options KTR_BOOT_ENTRIES=1024 options KTR_ENTRIES=(128*1024) options KTR_COMPILE=(KTR_ALL) options KTR_MASK=KTR_INTR options KTR_CPUMASK=0x3 options KTR_VERBOSE # # ALQ(9) is a facility for the asynchronous queuing of records from the kernel # to a vnode, and is employed by services such as ktr(4) to produce trace # files based on a kernel event stream. Records are written asynchronously # in a worker thread. # options ALQ options KTR_ALQ # # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options INVARIANTS # # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you # wish to build a kernel module with 'INVARIANTS', then adding # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary # infrastructure without the added overhead. # options INVARIANT_SUPPORT # # The KASSERT_PANIC_OPTIONAL option allows kasserts to fire without # necessarily inducing a panic. Panic is the default behavior, but # runtime options can configure it either entirely off, or off with a # limit. # options KASSERT_PANIC_OPTIONAL # # The DIAGNOSTIC option is used to enable extra debugging information # and invariants checking. The added checks are too expensive or noisy # for an INVARIANTS kernel and thus are disabled by default. It is # expected that a kernel configured with DIAGNOSTIC will also have the # INVARIANTS option enabled. # options DIAGNOSTIC # # REGRESSION causes optional kernel interfaces necessary only for regression # testing to be enabled. These interfaces may constitute security risks # when enabled, as they permit processes to easily modify aspects of the # run-time environment to reproduce unlikely or unusual (possibly normally # impossible) scenarios. # options REGRESSION # # This option lets some drivers co-exist that can't co-exist in a running # system. This is used to be able to compile all kernel code in one go for # quality assurance purposes (like this file, which the option takes it name # from.) # options COMPILING_LINT # # STACK enables the stack(9) facility, allowing the capture of kernel stack # for the purpose of procinfo(1), etc. stack(9) will also be compiled in # automatically if DDB(4) is compiled into the kernel. # options STACK # # The NUM_CORE_FILES option specifies the limit for the number of core # files generated by a particular process, when the core file format # specifier includes the %I pattern. Since we only have 1 character for # the core count in the format string, meaning the range will be 0-9, the # maximum value allowed for this option is 10. # This core file limit can be adjusted at runtime via the debug.ncores # sysctl. # options NUM_CORE_FILES=5 # # The TSLOG option enables timestamped logging of events, especially # function entries/exits, in order to track the time spent by the kernel. # In particular, this is useful when investigating the early boot process, # before it is possible to use more sophisticated tools like DTrace. # The TSLOGSIZE option controls the size of the (preallocated, fixed # length) buffer used for storing these events (default: 262144 records). # # For security reasons the TSLOG option should not be enabled on systems # used in production. # options TSLOG options TSLOGSIZE=262144 ##################################################################### # PERFORMANCE MONITORING OPTIONS # # The hwpmc driver that allows the use of in-CPU performance monitoring # counters for performance monitoring. The base kernel needs to be configured # with the 'options' line, while the hwpmc device can be either compiled # in or loaded as a loadable kernel module. # # Additional configuration options may be required on specific architectures, # please see hwpmc(4). device hwpmc # Driver (also a loadable module) options HWPMC_DEBUG options HWPMC_HOOKS # Other necessary kernel hooks ##################################################################### # NETWORKING OPTIONS # # Protocol families # options INET #Internet communications protocols options INET6 #IPv6 communications protocols options RATELIMIT # TX rate limiting support options ROUTETABLES=2 # allocated fibs up to 65536. default is 1. # but that would be a bad idea as they are large. options TCP_OFFLOAD # TCP offload support. options TCPHPTS # In order to enable IPSEC you MUST also add device crypto to # your kernel configuration options IPSEC #IP security (requires device crypto) # Option IPSEC_SUPPORT does not enable IPsec, but makes it possible to # load it as a kernel module. You still MUST add device crypto to your kernel # configuration. options IPSEC_SUPPORT #options IPSEC_DEBUG #debug for IP security # # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV # options. options NETSMB #SMB/CIFS requester # mchain library. It can be either loaded as KLD or compiled into kernel options LIBMCHAIN # libalias library, performing NAT options LIBALIAS # # SCTP is a NEW transport protocol defined by # RFC2960 updated by RFC3309 and RFC3758.. and # soon to have a new base RFC and many many more # extensions. This release supports all the extensions # including many drafts (most about to become RFC's). # It is the reference implementation of SCTP # and is quite well tested. # # Note YOU MUST have both INET and INET6 defined. # You don't have to enable V6, but SCTP is # dual stacked and so far we have not torn apart # the V6 and V4.. since an association can span # both a V6 and V4 address at the SAME time :-) # options SCTP # There are bunches of options: # this one turns on all sorts of # nastily printing that you can # do. It's all controlled by a # bit mask (settable by socket opt and # by sysctl). Including will not cause # logging until you set the bits.. but it # can be quite verbose.. so without this # option we don't do any of the tests for # bits and prints.. which makes the code run # faster.. if you are not debugging don't use. options SCTP_DEBUG # # All that options after that turn on specific types of # logging. You can monitor CWND growth, flight size # and all sorts of things. Go look at the code and # see. I have used this to produce interesting # charts and graphs as well :-> # # I have not yet committed the tools to get and print # the logs, I will do that eventually .. before then # if you want them send me an email rrs@freebsd.org # You basically must have ktr(4) enabled for these # and you then set the sysctl to turn on/off various # logging bits. Use ktrdump(8) to pull the log and run # it through a display program.. and graphs and other # things too. # options SCTP_LOCK_LOGGING options SCTP_MBUF_LOGGING options SCTP_MBCNT_LOGGING options SCTP_PACKET_LOGGING options SCTP_LTRACE_CHUNKS options SCTP_LTRACE_ERRORS # altq(9). Enable the base part of the hooks with the ALTQ option. # Individual disciplines must be built into the base system and can not be # loaded as modules at this point. ALTQ requires a stable TSC so if yours is # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC # option. options ALTQ options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_CODEL # CoDel Active Queueing options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_FAIRQ # Fair Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable options ALTQ_DEBUG # netgraph(4). Enable the base netgraph code with the NETGRAPH option. # Individual node types can be enabled with the corresponding option # listed below; however, this is not strictly necessary as netgraph # will automatically load the corresponding KLD module if the node type # is not already compiled into the kernel. Each type below has a # corresponding man page, e.g., ng_async(8). options NETGRAPH # netgraph(4) system options NETGRAPH_DEBUG # enable extra debugging, this # affects netgraph(4) and nodes # Node types options NETGRAPH_ASYNC options NETGRAPH_ATMLLC options NETGRAPH_ATM_ATMPIF options NETGRAPH_BLUETOOTH # ng_bluetooth(4) options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4) options NETGRAPH_BLUETOOTH_HCI # ng_hci(4) options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4) options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4) options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4) options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4) options NETGRAPH_BPF options NETGRAPH_BRIDGE options NETGRAPH_CAR options NETGRAPH_CHECKSUM options NETGRAPH_CISCO options NETGRAPH_DEFLATE options NETGRAPH_DEVICE options NETGRAPH_ECHO options NETGRAPH_EIFACE options NETGRAPH_ETHER options NETGRAPH_FRAME_RELAY options NETGRAPH_GIF options NETGRAPH_GIF_DEMUX options NETGRAPH_HOLE options NETGRAPH_IFACE options NETGRAPH_IP_INPUT options NETGRAPH_IPFW options NETGRAPH_KSOCKET options NETGRAPH_L2TP options NETGRAPH_LMI options NETGRAPH_MPPC_COMPRESSION options NETGRAPH_MPPC_ENCRYPTION options NETGRAPH_NETFLOW options NETGRAPH_NAT options NETGRAPH_ONE2MANY options NETGRAPH_PATCH options NETGRAPH_PIPE options NETGRAPH_PPP options NETGRAPH_PPPOE options NETGRAPH_PPTPGRE options NETGRAPH_PRED1 options NETGRAPH_RFC1490 options NETGRAPH_SOCKET options NETGRAPH_SPLIT options NETGRAPH_SPPP options NETGRAPH_TAG options NETGRAPH_TCPMSS options NETGRAPH_TEE options NETGRAPH_UI options NETGRAPH_VJC options NETGRAPH_VLAN # NgATM - Netgraph ATM options NGATM_ATM options NGATM_ATMBASE options NGATM_SSCOP options NGATM_SSCFU options NGATM_UNI options NGATM_CCATM device mn # Munich32x/Falc54 Nx64kbit/sec cards. # Network stack virtualization. options VIMAGE options VNET_DEBUG # debug for VIMAGE # # Network interfaces: # The `loop' device is MANDATORY when networking is enabled. device loop # The `ether' device provides generic code to handle # Ethernets; it is MANDATORY when an Ethernet device driver is # configured. device ether # The `vlan' device implements the VLAN tagging of Ethernet frames # according to IEEE 802.1Q. device vlan # The `vxlan' device implements the VXLAN encapsulation of Ethernet # frames in UDP packets according to RFC7348. device vxlan # The `wlan' device provides generic code to support 802.11 # drivers, including host AP mode; it is MANDATORY for the wi, # and ath drivers and will eventually be required by all 802.11 drivers. device wlan options IEEE80211_DEBUG #enable debugging msgs options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support options IEEE80211_SUPPORT_TDMA #enable TDMA support # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide # support for WEP, TKIP, and AES-CCMP crypto protocols optionally # used with 802.11 devices that depend on the `wlan' module. device wlan_wep device wlan_ccmp device wlan_tkip # The `wlan_xauth' device provides support for external (i.e. user-mode) # authenticators for use with 802.11 drivers that use the `wlan' # module and support 802.1x and/or WPA security protocols. device wlan_xauth # The `wlan_acl' device provides a MAC-based access control mechanism # for use with 802.11 drivers operating in ap mode and using the # `wlan' module. # The 'wlan_amrr' device provides AMRR transmit rate control algorithm device wlan_acl device wlan_amrr # The `sppp' device serves a similar role for certain types # of synchronous PPP links (like `cx', `ar'). device sppp # The `bpf' device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. DHCP requires bpf. device bpf # The `netmap' device implements memory-mapped access to network # devices from userspace, enabling wire-speed packet capture and # generation even at 10Gbit/s. Requires support in the device # driver. Supported drivers are ixgbe, e1000, re. device netmap # The `disc' device implements a minimal network interface, # which throws away all packets sent and never receives any. It is # included for testing and benchmarking purposes. device disc # The `epair' device implements a virtual back-to-back connected Ethernet # like interface pair. device epair # The `edsc' device implements a minimal Ethernet interface, # which discards all packets sent and receives none. device edsc # The `tuntap' device implements (user-)ppp, nos-tun(8) and a pty-like virtual # Ethernet interface device tuntap # The `gif' device implements IPv6 over IP4 tunneling, # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and # IPv6 over IPv6 tunneling. # The `gre' device implements GRE (Generic Routing Encapsulation) tunneling, # as specified in the RFC 2784 and RFC 2890. # The `me' device implements Minimal Encapsulation within IPv4 as # specified in the RFC 2004. # The XBONEHACK option allows the same pair of addresses to be configured on # multiple gif interfaces. device gif device gre device me options XBONEHACK # The `stf' device implements 6to4 encapsulation. device stf # The pf packet filter consists of three devices: # The `pf' device provides /dev/pf and the firewall code itself. # The `pflog' device provides the pflog0 interface which logs packets. # The `pfsync' device provides the pfsync0 interface used for # synchronization of firewall state tables (over the net). device pf device pflog device pfsync # Bridge interface. device if_bridge # Common Address Redundancy Protocol. See carp(4) for more details. device carp # IPsec interface. device enc # Link aggregation interface. device lagg # # Internet family options: # # MROUTING enables the kernel multicast packet forwarder, which works # with mrouted and XORP. # # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" # and if you do not add other rules during startup to allow access, # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open # in /etc/rc.conf when first enabling this feature, then refining the # firewall rules in /etc/rc.firewall after you've tested that the new kernel # feature works properly. # # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to # allow everything. Use with care, if a cracker can crash your # firewall machine, they can get to your protected machines. However, # if you are using it as an as-needed filter for specific problems as # they arise, then this may be for you. Changing the default to 'allow' # means that you won't get stuck if the kernel and /sbin/ipfw binary get # out of sync. # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It # depends on IPFIREWALL if compiled into the kernel. # # IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires # LIBALIAS. # # IPFIREWALL_NAT64 adds support for in kernel NAT64 in ipfw. # # IPFIREWALL_NPTV6 adds support for in kernel NPTv6 in ipfw. # # IPFIREWALL_PMOD adds support for protocols modification module. Currently # it supports only TCP MSS modification. # # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding # packets without touching the TTL). This can be useful to hide firewalls # from traceroute and similar tools. # # PF_DEFAULT_TO_DROP causes the default pf(4) rule to deny everything. # # TCPDEBUG enables code which keeps traces of the TCP state machine # for sockets with the SO_DEBUG option set, which can then be examined # using the trpt(8) utility. # # TCPPCAP enables code which keeps the last n packets sent and received # on a TCP socket. # # TCP_BLACKBOX enables enhanced TCP event logging. # # TCP_HHOOK enables the hhook(9) framework hooks for the TCP stack. # # RADIX_MPATH provides support for equal-cost multi-path routing. # options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPFIREWALL_NAT #ipfw kernel nat support options IPFIREWALL_NAT64 #ipfw kernel NAT64 support options IPFIREWALL_NPTV6 #ipfw kernel IPv6 NPT support options IPDIVERT #divert sockets options IPFILTER #ipfilter support options IPFILTER_LOG #ipfilter logging options IPFILTER_LOOKUP #ipfilter pools options IPFILTER_DEFAULT_BLOCK #block all packets by default options IPSTEALTH #support for stealth forwarding options PF_DEFAULT_TO_DROP #drop everything by default options TCPDEBUG options TCPPCAP options TCP_BLACKBOX options TCP_HHOOK options RADIX_MPATH # The MBUF_STRESS_TEST option enables options which create # various random failures / extreme cases related to mbuf # functions. See mbuf(9) for a list of available test cases. # MBUF_PROFILING enables code to profile the mbuf chains # exiting the system (via participating interfaces) and # return a logarithmic histogram of monitored parameters # (e.g. packet size, wasted space, number of mbufs in chain). options MBUF_STRESS_TEST options MBUF_PROFILING # Statically link in accept filters options ACCEPT_FILTER_DATA options ACCEPT_FILTER_DNS options ACCEPT_FILTER_HTTP # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are # carried in TCP option 19. This option is commonly used to protect # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable. # This is enabled on a per-socket basis using the TCP_MD5SIG socket option. # This requires the use of 'device crypto' and either 'options IPSEC' or # 'options IPSEC_SUPPORT'. options TCP_SIGNATURE #include support for RFC 2385 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL # as well. See dummynet(4) and ipfw(8) for more info. When you run # DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve # a smooth scheduling of the traffic. options DUMMYNET # The NETDUMP option enables netdump(4) client support in the kernel. # This allows a panicking kernel to transmit a kernel dump to a remote host. options NETDUMP ##################################################################### # FILESYSTEM OPTIONS # # Only the root filesystem needs to be statically compiled or preloaded # as module; everything else will be automatically loaded at mount # time. Some people still prefer to statically compile other # filesystems as well. # # NB: The UNION filesystem was known to be buggy in the past. It is now # being actively maintained, although there are still some issues being # resolved. # # One of these is mandatory: options FFS #Fast filesystem options NFSCL #Network File System client # The rest are optional: options AUTOFS #Automounter filesystem options CD9660 #ISO 9660 filesystem options FDESCFS #File descriptor filesystem options FUSEFS #FUSEFS support module options MSDOSFS #MS DOS File System (FAT, FAT32) options NFSLOCKD #Network Lock Manager options NFSD #Network Filesystem Server options KGSSAPI #Kernel GSSAPI implementation options NULLFS #NULL filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options PSEUDOFS_TRACE #Debugging support for PSEUDOFS options SMBFS #SMB/CIFS filesystem options TMPFS #Efficient memory filesystem options UDF #Universal Disk Format options UNIONFS #Union filesystem # The xFS_ROOT options REQUIRE the associated ``options xFS'' options NFS_ROOT #NFS usable as root device # Soft updates is a technique for improving filesystem speed and # making abrupt shutdown less risky. # options SOFTUPDATES # Extended attributes allow additional data to be associated with files, # and is used for ACLs, Capabilities, and MAC labels. # See src/sys/ufs/ufs/README.extattr for more information. options UFS_EXTATTR options UFS_EXTATTR_AUTOSTART # Access Control List support for UFS filesystems. The current ACL # implementation requires extended attribute support, UFS_EXTATTR, # for the underlying filesystem. # See src/sys/ufs/ufs/README.acls for more information. options UFS_ACL # Directory hashing improves the speed of operations on very large # directories at the expense of some memory. options UFS_DIRHASH # Gjournal-based UFS journaling support. options UFS_GJOURNAL # Make space in the kernel for a root filesystem on a md device. # Define to the number of kilobytes to reserve for the filesystem. # This is now optional. # If not defined, the root filesystem passed in as the MFS_IMAGE makeoption # will be automatically embedded in the kernel during linking. Its exact size # will be consumed within the kernel. # If defined, the old way of embedding the filesystem in the kernel will be # used. That is to say MD_ROOT_SIZE KB will be allocated in the kernel and # later, the filesystem image passed in as the MFS_IMAGE makeoption will be # dd'd into the reserved space if it fits. options MD_ROOT_SIZE=10 # Make the md device a potential root device, either with preloaded # images of type mfs_root or md_root. options MD_ROOT # Write-protect the md root device so that it may not be mounted writeable. options MD_ROOT_READONLY # Allow to read MD image from external memory regions options MD_ROOT_MEM # Disk quotas are supported when this option is enabled. options QUOTA #enable disk quotas # If you are running a machine just as a fileserver for PC and MAC # users, using SAMBA, you may consider setting this option # and keeping all those users' directories on a filesystem that is # mounted with the suiddir option. This gives new files the same # ownership as the directory (similar to group). It's a security hole # if you let these users run programs, so confine it to file-servers # (but it'll save you lots of headaches in those cases). Root owned # directories are exempt and X bits are cleared. The suid bit must be # set on the directory as well; see chmod(1). PC owners can't see/set # ownerships so they keep getting their toes trodden on. This saves # you all the support calls as the filesystem it's used on will act as # they expect: "It's my dir so it must be my file". # options SUIDDIR # NFS options: options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec options NFS_MAXATTRTIMO=60 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec options NFS_MAXDIRATTRTIMO=60 options NFS_DEBUG # Enable NFS Debugging # # Add support for the EXT2FS filesystem of Linux fame. Be a bit # careful with this - the ext2fs code has a tendency to lag behind # changes and not be exercised very much, so mounting read/write could # be dangerous (and even mounting read only could result in panics.) # options EXT2FS # The system memory devices; /dev/mem, /dev/kmem device mem # The kernel symbol table device; /dev/ksyms device ksyms # Optional character code conversion support with LIBICONV. # Each option requires their base file system and LIBICONV. options CD9660_ICONV options MSDOSFS_ICONV options UDF_ICONV ##################################################################### # POSIX P1003.1B # Real time extensions added in the 1993 POSIX # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING options _KPOSIX_PRIORITY_SCHEDULING # p1003_1b_semaphores are very experimental, # user should be ready to assist in debugging if problems arise. options P1003_1B_SEMAPHORES # POSIX message queue options P1003_1B_MQUEUE ##################################################################### # SECURITY POLICY PARAMETERS # Support for BSM audit options AUDIT # Support for Mandatory Access Control (MAC): options MAC options MAC_BIBA options MAC_BSDEXTENDED options MAC_IFOFF options MAC_LOMAC options MAC_MLS options MAC_NONE options MAC_NTPD options MAC_PARTITION options MAC_PORTACL options MAC_SEEOTHERUIDS options MAC_STUB options MAC_TEST # Support for Capsicum options CAPABILITIES # fine-grained rights on file descriptors options CAPABILITY_MODE # sandboxes with no global namespace access ##################################################################### # CLOCK OPTIONS # The granularity of operation is controlled by the kernel option HZ whose # default value (1000 on most architectures) means a granularity of 1ms # (1s/HZ). Historically, the default was 100, but finer granularity is # required for DUMMYNET and other systems on modern hardware. There are # reasonable arguments that HZ should, in fact, be 100 still; consider, # that reducing the granularity too much might cause excessive overhead in # clock interrupt processing, potentially causing ticks to be missed and thus # actually reducing the accuracy of operation. options HZ=100 # Enable support for the kernel PLL to use an external PPS signal, # under supervision of [x]ntpd(8) # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp options PPS_SYNC # Enable support for generic feed-forward clocks in the kernel. # The feed-forward clock support is an alternative to the feedback oriented # ntpd/system clock approach, and is to be used with a feed-forward # synchronization algorithm such as the RADclock: # More info here: http://www.synclab.org/radclock options FFCLOCK ##################################################################### # SCSI DEVICES # SCSI DEVICE CONFIGURATION # The SCSI subsystem consists of the `base' SCSI code, a number of # high-level SCSI device `type' drivers, and the low-level host-adapter # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # # It is possible to wire down your SCSI devices so that a given bus, # target, and LUN always come on line as the same device unit. In # earlier versions the unit numbers were assigned in the order that # the devices were probed on the SCSI bus. This means that if you # removed a disk drive, you may have had to rewrite your /etc/fstab # file, and also that you had to be careful when adding a new disk # as it may have been probed earlier and moved your device configuration # around. (See also option GEOM_VOL for a different solution to this # problem.) # This old behavior is maintained as the default behavior. The unit # assignment begins with the first non-wired down unit for a device # type. For example, if you wire a disk as "da3" then the first # non-wired disk will be assigned da4. # The syntax for wiring down devices is: hint.scbus.0.at="ahc0" hint.scbus.1.at="ahc1" hint.scbus.1.bus="0" hint.scbus.3.at="ahc2" hint.scbus.3.bus="0" hint.scbus.2.at="ahc2" hint.scbus.2.bus="1" hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" hint.da.1.at="scbus3" hint.da.1.target="1" hint.da.2.at="scbus2" hint.da.2.target="3" hint.sa.1.at="scbus1" hint.sa.1.target="6" # "units" (SCSI logical unit number) that are not specified are # treated as if specified as LUN 0. # All SCSI devices allocate as many units as are required. # The ch driver drives SCSI Media Changer ("jukebox") devices. # # The da driver drives SCSI Direct Access ("disk") and Optical Media # ("WORM") devices. # # The sa driver drives SCSI Sequential Access ("tape") devices. # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # # The ses driver drives SCSI Environment Services ("ses") and # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # # The sg driver provides a passthrough API that is compatible with the # Linux SG driver. It will work in conjunction with the COMPAT_LINUX # option to run linux SG apps. It can also stand on its own and provide # source level API compatibility for porting apps to FreeBSD. # # Target Mode support is provided here but also requires that a SIM # (SCSI Host Adapter Driver) provide support as well. # # The targ driver provides target mode support as a Processor type device. # It exists to give the minimal context necessary to respond to Inquiry # commands. There is a sample user application that shows how the rest # of the command support might be done in /usr/share/examples/scsi_target. # # The targbh driver provides target mode support and exists to respond # to incoming commands that do not otherwise have a logical unit assigned # to them. # # The pass driver provides a passthrough API to access the CAM subsystem. device scbus #base SCSI code device ch #SCSI media changers device da #SCSI direct access devices (aka disks) device sa #SCSI tapes device cd #SCSI CD-ROMs device ses #Enclosure Services (SES and SAF-TE) device pt #SCSI processor device targ #SCSI Target Mode Code device targbh #SCSI Target Mode Blackhole Device device pass #CAM passthrough driver device sg #Linux SCSI passthrough device ctl #CAM Target Layer # CAM OPTIONS: # debugging options: # CAMDEBUG Compile in all possible debugging. # CAM_DEBUG_COMPILE Debug levels to compile in. # CAM_DEBUG_FLAGS Debug levels to enable on boot. # CAM_DEBUG_BUS Limit debugging to the given bus. # CAM_DEBUG_TARGET Limit debugging to the given target. # CAM_DEBUG_LUN Limit debugging to the given lun. # CAM_DEBUG_DELAY Delay in us after printing each debug line. # # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) # queue after a bus reset, and the number of milliseconds to # freeze the device queue after a bus device reset. This # can be changed at boot and runtime with the # kern.cam.scsi_delay tunable/sysctl. options CAMDEBUG options CAM_DEBUG_COMPILE=-1 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH) options CAM_DEBUG_BUS=-1 options CAM_DEBUG_TARGET=-1 options CAM_DEBUG_LUN=-1 options CAM_DEBUG_DELAY=1 options CAM_MAX_HIGHPOWER=4 options SCSI_NO_SENSE_STRINGS options SCSI_NO_OP_STRINGS options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device options CAM_IOSCHED_DYNAMIC options CAM_TEST_FAILURE # Options for the CAM CDROM driver: # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only # enforced if there is I/O waiting for another LUN # The compiled in defaults for these variables are 2 and 10 seconds, # respectively. # # These can also be changed on the fly with the following sysctl variables: # kern.cam.cd.changer.min_busy_seconds # kern.cam.cd.changer.max_busy_seconds # options CHANGER_MIN_BUSY_SECONDS=2 options CHANGER_MAX_BUSY_SECONDS=10 # Options for the CAM sequential access driver: # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT. options SA_IO_TIMEOUT=4 options SA_SPACE_TIMEOUT=60 options SA_REWIND_TIMEOUT=(2*60) options SA_ERASE_TIMEOUT=(4*60) options SA_1FM_AT_EOD # Optional timeout for the CAM processor target (pt) device # This is specified in seconds. The default is 60 seconds. options SCSI_PT_DEFAULT_TIMEOUT=60 # Optional enable of doing SES passthrough on other devices (e.g., disks) # # Normally disabled because a lot of newer SCSI disks report themselves # as having SES capabilities, but this can then clot up attempts to build # a topology with the SES device that's on the box these drives are in.... options SES_ENABLE_PASSTHROUGH ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device pty #BSD-style compatibility pseudo ttys device nmdm #back-to-back tty devices device md #Memory/malloc disk device snp #Snoop device - to look at pty/vty/etc.. device ccd #Concatenated disk driver device firmware #firmware(9) support # Kernel side iconv library options LIBICONV # Size of the kernel message buffer. Should be N * pagesize. options MSGBUF_SIZE=40960 ##################################################################### # HARDWARE BUS CONFIGURATION # # PCI bus & PCI options: # device pci options PCI_HP # PCI-Express native HotPlug options PCI_IOV # PCI SR-IOV support ##################################################################### # HARDWARE DEVICE CONFIGURATION # For ISA the required hints are listed. # PCI, CardBus, SD/MMC and pccard are self identifying buses, so # no hints are needed. # # Mandatory devices: # # These options are valid for other keyboard drivers as well. options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap options KBD_INSTALL_CDEV # install a CDEV entry in /dev device kbdmux # keyboard multiplexer options KBDMUX_DFLT_KEYMAP # specify the built-in keymap makeoptions KBDMUX_DFLT_KEYMAP=it.iso options FB_DEBUG # Frame buffer debugging device splash # Splash screen and screen saver support # Various screen savers. device blank_saver device daemon_saver device dragon_saver device fade_saver device fire_saver device green_saver device logo_saver device rain_saver device snake_saver device star_saver device warp_saver # The syscons console driver (SCO color console compatible). device sc hint.sc.0.at="isa" options MAXCONS=16 # number of virtual consoles options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp850 options SC_DFLT_TERM=\"sc\" # default terminal emulator options SC_DISABLE_KDBKEY # disable `debug' key options SC_DISABLE_REBOOT # disable reboot key sequence options SC_HISTORY_SIZE=200 # number of history buffer lines options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor options SC_PIXEL_MODE # add support for the raster text mode # The following options will let you change the default colors of syscons. options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK) options SC_KERNEL_CONS_ATTRS=\"\x0c\x0d\x0e\x0f\x02\x09\x0a\x0b\" options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) # The following options will let you change the default behavior of # cut-n-paste feature options SC_CUT_SPACES2TABS # convert leading spaces into tabs options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words # (default is single space - \"x20\") # If you have a two button mouse, you may want to add the following option # to use the right button of the mouse to paste text. options SC_TWOBUTTON_MOUSE # You can selectively disable features in syscons. options SC_NO_CUTPASTE options SC_NO_FONT_LOADING options SC_NO_HISTORY options SC_NO_MODE_CHANGE options SC_NO_SYSMOUSE options SC_NO_SUSPEND_VTYSWITCH #!options SC_NO_TERM_DUMB #!options SC_NO_TERM_SC #!options SC_NO_TERM_SCTEKEN # `flags' for sc # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode # 0x100 Probe for a keyboard device periodically if one is not present # Enable experimental features of the syscons terminal emulator (teken). options TEKEN_CONS25 # cons25-style terminal emulation options TEKEN_UTF8 # UTF-8 output handling # The vt video console driver. device vt options VT_ALT_TO_ESC_HACK=1 # Prepend ESC sequence to ALT keys options VT_MAXWINDOWS=16 # Number of virtual consoles options VT_TWOBUTTON_MOUSE # Use right mouse button to paste # The following options set the default framebuffer size. options VT_FB_DEFAULT_HEIGHT=480 options VT_FB_DEFAULT_WIDTH=640 # The following options will let you change the default vt terminal colors. options TERMINAL_NORM_ATTR=(FG_GREEN|BG_BLACK) options TERMINAL_KERN_ATTR=(FG_LIGHTRED|BG_BLACK) # # Optional devices: # # # SCSI host adapters: # # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx # ahd: Adaptec 29320/39320 Controllers. # esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers # including the AMD Am53C974 (found on devices such as the Tekram # DC-390(T)) and the Sun ESP and FAS families of controllers # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters. # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters. # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters. # ispfw: Firmware module for Qlogic host adapters # mpr: LSI-Logic MPT/Fusion Gen 3 # mps: LSI-Logic MPT/Fusion Gen 2 # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4 # or FC9x9 Fibre Channel host adapters. # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors: # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875, # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. # trm: Tekram DC395U/UW/F DC315U adapters. device ahc device ahd device esp device iscsi_initiator device isp hint.isp.0.disable="1" hint.isp.0.role="3" hint.isp.0.prefer_iomap="1" hint.isp.0.prefer_memmap="1" hint.isp.0.fwload_disable="1" hint.isp.0.ignore_nvram="1" hint.isp.0.fullduplex="1" hint.isp.0.topology="lport" hint.isp.0.topology="nport" hint.isp.0.topology="lport-only" hint.isp.0.topology="nport-only" # we can't get u_int64_t types, nor can we get strings if it's got # a leading 0x, hence this silly dodge. hint.isp.0.portwnn="w50000000aaaa0000" hint.isp.0.nodewnn="w50000000aaaa0001" device ispfw device mpr # LSI-Logic MPT-Fusion 3 device mps # LSI-Logic MPT-Fusion 2 device mpt # LSI-Logic MPT-Fusion device sym device trm # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, # this doesn't work on some motherboards, which prevents it from being the # default. options AHC_ALLOW_MEMIO # Dump the contents of the ahc controller configuration PROM. options AHC_DUMP_EEPROM # Bitmap of units to enable targetmode operations. options AHC_TMODE_ENABLE # Compile in Aic7xxx Debugging code. options AHC_DEBUG # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h options AHC_DEBUG_OPTS # Print register bitfields in debug output. Adds ~128k to driver # See ahc(4). options AHC_REG_PRETTY_PRINT # Compile in aic79xx debugging code. options AHD_DEBUG # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4). options AHD_DEBUG_OPTS=0xFFFFFFFF # Print human-readable register definitions when debugging options AHD_REG_PRETTY_PRINT # Bitmap of units to enable targetmode operations. options AHD_TMODE_ENABLE # Options used in dev/iscsi (Software iSCSI stack) # options ISCSI_INITIATOR_DEBUG=9 # Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # options ISP_TARGET_MODE=1 # # ISP_DEFAULT_ROLES - default role # none=0 # target=1 # initiator=2 # both=3 (not supported currently) # # ISP_INTERNAL_TARGET (trivial internal disk target, for testing) # options ISP_DEFAULT_ROLES=0 #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 #options SYM_SETUP_PCI_PARITY #-PCI parity checking # disabled:0, enabled:1 (default) #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] # # Compaq "CISS" RAID controllers (SmartRAID 5* series) # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device ciss # # Intel Integrated RAID controllers. # This driver was developed and is maintained by Intel. Contacts # at Intel for this driver are # "Kannanthanam, Boji T" and # "Leubner, Achim" . # device iir # # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later # firmware. These controllers have a SCSI-like interface, and require # the CAM infrastructure. # device mly # # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only # one entry is needed; the code will find and configure all supported # controllers. # device ida # Compaq Smart RAID device mlx # Mylex DAC960 device amr # AMI MegaRAID device amrp # SCSI Passthrough interface (optional, CAM req.) device mfi # LSI MegaRAID SAS device mfip # LSI MegaRAID SAS passthrough, requires CAM options MFI_DEBUG device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s # # 3ware ATA RAID # device twe # 3ware ATA RAID # # Serial ATA host controllers: # # ahci: Advanced Host Controller Interface (AHCI) compatible # mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers # siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers # # These drivers are part of cam(4) subsystem. They supersede less featured # ata(4) subsystem drivers, supporting same hardware. device ahci device mvs device siis # # The 'ATA' driver supports all legacy ATA/ATAPI controllers, including # PC Card devices. You only need one "device ata" for it to find all # PCI and PC Card ATA/ATAPI devices on modern machines. # Alternatively, individual bus and chipset drivers may be chosen by using # the 'atacore' driver then selecting the drivers on a per vendor basis. # For example to build a system which only supports a VIA chipset, # omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers. device ata # Modular ATA #device atacore # Core ATA functionality #device atapccard # CARDBUS support #device ataisa # ISA bus support #device atapci # PCI bus support; only generic chipset support # PCI ATA chipsets #device ataacard # ACARD #device ataacerlabs # Acer Labs Inc. (ALI) #device ataamd # American Micro Devices (AMD) #device ataati # ATI #device atacenatek # Cenatek #device atacypress # Cypress #device atacyrix # Cyrix #device atahighpoint # HighPoint #device ataintel # Intel #device ataite # Integrated Technology Inc. (ITE) #device atajmicron # JMicron #device atamarvell # Marvell #device atamicron # Micron #device atanational # National #device atanetcell # NetCell #device atanvidia # nVidia #device atapromise # Promise #device ataserverworks # ServerWorks #device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD) #device atasis # Silicon Integrated Systems Corp.(SiS) #device atavia # VIA Technologies Inc. # # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add: hint.ata.0.at="isa" hint.ata.0.port="0x1f0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" # # Standard floppy disk controllers and floppy tapes, supports # the Y-E DATA External FDD (PC Card) # device fdc hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" # # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you # gotta turn it actually on by setting the variable fd_debug with DDB, # however. options FDC_DEBUG # # Activate this line if you happen to have an Insight floppy tape. # Probing them proved to be dangerous for people with floppy disks only, # so it's "hidden" behind a flag: #hint.fdc.0.flags="1" # Specify floppy devices hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" # # uart: newbusified driver for serial interfaces. It consolidates the sio(4), # sab(4) and zs(4) drivers. # device uart # Options for uart(4) options UART_PPS_ON_CTS # Do time pulse capturing using CTS # instead of DCD. options UART_POLL_FREQ # Set polling rate, used when hw has # no interrupt support (50 Hz default). # The following hint should only be used for pure ISA devices. It is not # needed otherwise. Use of hints is strongly discouraged. hint.uart.0.at="isa" # The following 3 hints are used when the UART is a system device (i.e., a # console or debug port), but only on platforms that don't have any other # means to pass the information to the kernel. The unit number of the hint # is only used to bundle the hints together. There is no relation to the # unit number of the probed UART. hint.uart.0.port="0x3f8" hint.uart.0.flags="0x10" hint.uart.0.baud="115200" # `flags' for serial drivers that support consoles like sio(4) and uart(4): # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behavior. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # # Options for serial drivers that support consoles: options BREAK_TO_DEBUGGER # A BREAK/DBG on the console goes to # ddb, if available. # Solaris implements a new BREAK which is initiated by a character # sequence CR ~ ^b which is similar to a familiar pattern used on # Sun servers by the Remote Console. There are FreeBSD extensions: # CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot. options ALT_BREAK_TO_DEBUGGER # Serial Communications Controller # Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel # communications controllers. device scc # PCI Universal Communications driver # Supports various multi port PCI I/O cards. device puc # # Network interfaces: # # MII bus support is required for many PCI Ethernet NICs, # namely those which use MII-compliant transceivers or implement # transceiver control interfaces that operate like an MII. Adding # "device miibus" to the kernel config pulls in support for the generic # miibus API, the common support for for bit-bang'ing the MII and all # of the PHY drivers, including a generic one for PHYs that aren't # specifically handled by an individual driver. Support for specific # PHYs may be built by adding "device mii", "device mii_bitbang" if # needed by the NIC driver and then adding the appropriate PHY driver. device mii # Minimal MII support device mii_bitbang # Common module for bit-bang'ing the MII device miibus # MII support w/ bit-bang'ing and all PHYs device acphy # Altima Communications AC101 device amphy # AMD AM79c873 / Davicom DM910{1,2} device atphy # Attansic/Atheros F1 device axphy # Asix Semiconductor AX88x9x device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C device bnxt # Broadcom NetXtreme-C/NetXtreme-E device brgphy # Broadcom BCM54xx/57xx 1000baseTX device ciphy # Cicada/Vitesse CS/VSC8xxx device e1000phy # Marvell 88E1000 1000/100/10-BT device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces device icsphy # ICS ICS1889-1893 device ip1000phy # IC Plus IP1000A/IP1001 device jmphy # JMicron JMP211/JMP202 device lxtphy # Level One LXT-970 device mlphy # Micro Linear 6692 device nsgphy # NatSemi DP8361/DP83865/DP83891 device nsphy # NatSemi DP83840A device nsphyter # NatSemi DP83843/DP83815 device pnaphy # HomePNA device qsphy # Quality Semiconductor QS6612 device rdcphy # RDC Semiconductor R6040 device rgephy # RealTek 8169S/8110S/8211B/8211C device rlphy # RealTek 8139 device rlswitch # RealTek 8305 device smcphy # SMSC LAN91C111 device tdkphy # TDK 89Q2120 device tlphy # Texas Instruments ThunderLAN device truephy # LSI TruePHY device xmphy # XaQti XMAC II # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA, # PCI and ISA varieties. # ae: Support for gigabit ethernet adapters based on the Attansic/Atheros # L2 PCI-Express FastEthernet controllers. # age: Support for gigabit ethernet adapters based on the Attansic/Atheros # L1 PCI express gigabit ethernet controllers. # alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers. # ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers. # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet # adapters. # bfe: Broadcom BCM4401 Ethernet adapter. # bge: Support for gigabit ethernet adapters based on the Broadcom # BCM570x family of controllers, including the 3Com 3c996-T, # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and # the embedded gigE NICs on Dell PowerEdge 2550 servers. # bnxt: Broadcom NetXtreme-C and NetXtreme-E PCIe 10/25/50G Ethernet adapters. # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # bwi: Broadcom BCM430* and BCM431* family of wireless adapters. # bwn: Broadcom BCM43xx family of wireless adapters. # cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn # cxgb: Chelsio T3 based 1GbE/10GbE PCIe Ethernet adapters. # cxgbe:Chelsio T4, T5, and T6-based 1/10/25/40/100GbE PCIe Ethernet # adapters. # cxgbev: Chelsio T4, T5, and T6-based PCIe Virtual Functions. # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143 # and various workalikes including: # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver # replaces the old al, ax, dm, pn and mx drivers. List of brands: # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110, # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX, # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204, # KNE110TX. # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters. # fxp: Intel EtherExpress Pro/100B # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping) # gem: Apple GMAC/Sun ERI/Sun GEM # hme: Sun HME (Happy Meal Ethernet) # jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters. # le: AMD Am7900 LANCE and Am79C9xx PCnet # lge: Support for PCI gigabit ethernet adapters based on the Level 1 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX, # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards. # lio: Support for Cavium 23XX Ethernet adapters # malo: Marvell Libertas wireless NICs. # mwl: Marvell 88W8363 802.11n wireless NICs. # Requires the mwl firmware module # mwlfw: Marvell 88W8363 firmware # msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect # Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061, # 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053, # 88E8055, 88E8056 and D-Link 560T/550SX. # mlxfw: Mellanox firmware update module. # mlx5: Mellanox ConnectX-4 and ConnectX-4 LX IB and Eth shared code module. # mlx5en:Mellanox ConnectX-4 and ConnectX-4 LX PCIe Ethernet adapters. # my: Myson Fast Ethernet (MTD80X, MTD89X) # nge: Support for PCI gigabit ethernet adapters based on the National # Semiconductor DP83820 and DP83821 chipset. This includes the # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom # EP-320G-TX and the Netgear GA622T. # oce: Emulex 10 Gbit adapters (OneConnect Ethernet) # ral: Ralink Technology IEEE 802.11 wireless adapter # re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139 # chipset. Note that the RealTek driver defaults to using programmed # I/O to do register accesses because memory mapped mode seems to cause # severe lockups on SMP hardware. This driver also supports the # Accton EN1207D `Cheetah' adapter, which uses a chip called # the MPX 5030/5038, which is either a RealTek in disguise or a # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek # chipset and is supported by this driver, not the 'vr' driver. # rtwn: RealTek wireless adapters. # rtwnfw: RealTek wireless firmware. # sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter # sis: Support for NICs based on the Silicon Integrated Systems SiS 900, # SiS 7016 and NS DP83815 PCI fast ethernet controller chips. # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs. # This includes the SK-9841 and SK-9842 single port cards (single mode # and multimode fiber) and the SK-9843 and SK-9844 dual port cards # (also single mode and multimode). # The driver will autodetect the number of ports on the card and # attach each one as a separate network interface. # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes # the D-Link DFE-550TX. # stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack # TC9021 family of controllers, including the Sundance ST2021/ST2023, # the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101. # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the # 3Com 3c985, the Netgear GA620 and various others. Note that you will # probably want to bump up kern.ipc.nmbclusters a lot to use this driver. # vr: Support for various fast ethernet adapters based on the VIA # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, # including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for # DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320. # vte: DM&P Vortex86 RDC R6040 Fast Ethernet # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA # bridge with a PCMCIA adapter plugged into it. # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast) # Etherlink XL cards and integrated controllers. This includes the # integrated 3c905B-TX chips in certain Dell Optiplex and Dell # Precision desktop machines and the integrated 3c905-TX chips # in Dell Latitude laptop docking stations. # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX # Order for ISA devices is important here device an device wi # PCI Ethernet NICs that use the common MII bus controller code. device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) hint.fxp.0.prefer_iomap="0" device gem # Apple GMAC/Sun ERI/Sun GEM device hme # Sun HME (Happy Meal Ethernet) device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device mlxfw # Mellanox firmware update module device mlx5 # Shared code module between IB and Ethernet device mlx5en # Mellanox ConnectX-4 and ConnectX-4 LX device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device my # Myson Fast Ethernet (MTD80X, MTD89X) device nge # NatSemi DP83820 gigabit Ethernet device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sge # Silicon Integrated Systems SiS190/191 device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device vr # VIA Rhine, Rhine II device vte # DM&P Vortex86 RDC R6040 Fast Ethernet device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # PCI/PCI-X/PCIe Ethernet NICs that use iflib infrastructure device iflib device em # Intel Pro/1000 Gigabit Ethernet device ix # Intel Pro/10Gbe PCIE Ethernet device ixv # Intel Pro/10Gbe PCIE Ethernet VF # PCI Ethernet NICs. device cxgb # Chelsio T3 10 Gigabit Ethernet device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware device cxgbe # Chelsio T4-T6 1/10/25/40/100 Gigabit Ethernet device cxgbev # Chelsio T4-T6 Virtual Functions device le # AMD Am7900 LANCE and Am79C9xx PCnet device mxge # Myricom Myri-10G 10GbE NIC device oce # Emulex 10 GbE (OneConnect Ethernet) device ti # Alteon Networks Tigon I/II gigabit Ethernet # PCI IEEE 802.11 Wireless NICs device ath # Atheros pci/cardbus NIC's device ath_hal # pci/cardbus chip support #device ath_ar5210 # AR5210 chips #device ath_ar5211 # AR5211 chips #device ath_ar5212 # AR5212 chips #device ath_rf2413 #device ath_rf2417 #device ath_rf2425 #device ath_rf5111 #device ath_rf5112 #device ath_rf5413 #device ath_ar5416 # AR5416 chips # All of the AR5212 parts have a problem when paired with the AR71xx # CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx # only. Details of the exact nature of the bug are sketchy, but some can be # found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and # 6. This option enables this workaround. There is a performance penalty # for this work around, but without it things don't work at all. The DMA # from the card usually bursts 128 bytes, but on the affected CPUs, only # 4 are safe. options AH_RXCFG_SDMAMW_4BYTES #device ath_ar9160 # AR9160 chips #device ath_ar9280 # AR9280 chips #device ath_ar9285 # AR9285 chips device ath_rate_sample # SampleRate tx rate control for ath device bwi # Broadcom BCM430* BCM431* device bwn # Broadcom BCM43xx device malo # Marvell Libertas wireless NICs. device mwl # Marvell 88W8363 802.11n wireless NICs. device mwlfw device ral # Ralink Technology RT2500 wireless NICs. device rtwn # Realtek wireless NICs device rtwnfw # Use sf_buf(9) interface for jumbo buffers on ti(4) controllers. #options TI_SF_BUF_JUMBO # Turn on the header splitting option for the ti(4) driver firmware. This # only works for Tigon II chips, and has no effect for Tigon I chips. # This option requires the TI_SF_BUF_JUMBO option above. #options TI_JUMBO_HDRSPLIT # These two options allow manipulating the mbuf cluster size and mbuf size, # respectively. Be very careful with NIC driver modules when changing # these from their default values, because that can potentially cause a # mismatch between the mbuf size assumed by the kernel and the mbuf size # assumed by a module. The only driver that currently has the ability to # detect a mismatch is ti(4). options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB options MSIZE=512 # mbuf size in bytes # # Sound drivers # # sound: The generic sound driver. # device sound # # snd_*: Device-specific drivers. # # The flags of the device tell the device a bit more info about the # device that normally is obtained through the PnP interface. # bit 2..0 secondary DMA channel; # bit 4 set if the board uses two dma channels; # bit 15..8 board type, overrides autodetection; leave it # zero if don't know what to put in (and you don't, # since this is unsupported at the moment...). # # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP. # snd_als4000: Avance Logic ALS4000 PCI. # snd_atiixp: ATI IXP 200/300/400 PCI. # snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only # for sparc64. # snd_cmi: CMedia CMI8338/CMI8738 PCI. # snd_cs4281: Crystal Semiconductor CS4281 PCI. # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except # 4281) # snd_ds1: Yamaha DS-1 PCI. # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI. # snd_emu10kx: Creative SoundBlaster Live! and Audigy # snd_envy24: VIA Envy24 and compatible, needs snd_spicds. # snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds. # snd_es137x: Ensoniq AudioPCI ES137x PCI. # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in # conjunction with snd_sbc. # snd_fm801: Forte Media FM801 PCI. # snd_gusc: Gravis UltraSound ISA PnP/non-PnP. # snd_hda: Intel High Definition Audio (Controller) and # compatible. # snd_hdspe: RME HDSPe AIO and RayDAT. # snd_ich: Intel ICH AC'97 and some more audio controllers # embedded in a chipset, for example nVidia # nForce controllers. # snd_maestro: ESS Technology Maestro-1/2x PCI. # snd_maestro3: ESS Technology Maestro-3/Allegro PCI. # snd_mss: Microsoft Sound System ISA PnP/non-PnP. # snd_neomagic: Neomagic 256 AV/ZX PCI. # snd_sb16: Creative SoundBlaster16, to be used in # conjunction with snd_sbc. # snd_sb8: Creative SoundBlaster (pre-16), to be used in # conjunction with snd_sbc. # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP. # Supports ESS and Avance ISA chips as well. # snd_solo: ESS Solo-1x PCI. # snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers. # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs # M5451 PCI. # snd_uaudio: USB audio. # snd_via8233: VIA VT8233x PCI. # snd_via82c686: VIA VT82C686A PCI. # snd_vibes: S3 Sonicvibes PCI. device snd_ad1816 device snd_als4000 device snd_atiixp #device snd_audiocs device snd_cmi device snd_cs4281 device snd_csa device snd_ds1 device snd_emu10k1 device snd_emu10kx device snd_envy24 device snd_envy24ht device snd_es137x device snd_ess device snd_fm801 device snd_gusc device snd_hda device snd_hdspe device snd_ich device snd_maestro device snd_maestro3 device snd_mss device snd_neomagic device snd_sb16 device snd_sb8 device snd_sbc device snd_solo device snd_spicds device snd_t4dwave device snd_uaudio device snd_via8233 device snd_via82c686 device snd_vibes # For non-PnP sound cards: hint.pcm.0.at="isa" hint.pcm.0.irq="10" hint.pcm.0.drq="1" hint.pcm.0.flags="0x0" hint.sbc.0.at="isa" hint.sbc.0.port="0x220" hint.sbc.0.irq="5" hint.sbc.0.drq="1" hint.sbc.0.flags="0x15" hint.gusc.0.at="isa" hint.gusc.0.port="0x220" hint.gusc.0.irq="5" hint.gusc.0.drq="1" hint.gusc.0.flags="0x13" # # Following options are intended for debugging/testing purposes: # # SND_DEBUG Enable extra debugging code that includes # sanity checking and possible increase of # verbosity. # # SND_DIAGNOSTIC Similar in a spirit of INVARIANTS/DIAGNOSTIC, # zero tolerance against inconsistencies. # # SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled # in. This options enable most feeder converters # except for 8bit. WARNING: May bloat the kernel. # # SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well. # # SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic # as much as possible (the default trying to # avoid it). Possible slowdown. # # SND_PCM_64 (Only applicable for i386/32bit arch) # Process 32bit samples through 64bit # integer/arithmetic. Slight increase of dynamic # range at a cost of possible slowdown. # # SND_OLDSTEREO Only 2 channels are allowed, effectively # disabling multichannel processing. # options SND_DEBUG options SND_DIAGNOSTIC options SND_FEEDER_MULTIFORMAT options SND_FEEDER_FULL_MULTIFORMAT options SND_FEEDER_RATE_HP options SND_PCM_64 options SND_OLDSTEREO # # Miscellaneous hardware: # # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board # cmx: OmniKey CardMan 4040 pccard smartcard reader device cmx # # The 'bktr' device is a PCI video capture device using the Brooktree # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a # TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator, # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo. # # options OVERRIDE_CARD=xxx # options OVERRIDE_TUNER=xxx # options OVERRIDE_MSP=1 # options OVERRIDE_DBX=1 # These options can be used to override the auto detection # The current values for xxx are found in src/sys/dev/bktr/bktr_card.h # Using sysctl(8) run-time overrides on a per-card basis can be made # # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL # or # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC # Specifies the default video capture mode. # This is required for Dual Crystal (28&35MHz) boards where PAL is used # to prevent hangs during initialization, e.g. VideoLogic Captivator PCI. # # options BKTR_USE_PLL # This is required for PAL or SECAM boards with a 28MHz crystal and no 35MHz # crystal, e.g. some new Bt878 cards. # # options BKTR_GPIO_ACCESS # This enables IOCTLs which give user level access to the GPIO port. # # options BKTR_NO_MSP_RESET # Prevents the MSP34xx reset. Good if you initialize the MSP in another OS first # # options BKTR_430_FX_MODE # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode. # # options BKTR_SIS_VIA_MODE # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is # needed for some old SiS and VIA chipset motherboards. # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset # motherboards and motherboards with bad or incomplete PCI 2.1 support. # As a rough guess, old = before 1998 # # options BKTR_NEW_MSP34XX_DRIVER # Use new, more complete initialization scheme for the msp34* soundchip. # Should fix stereo autodetection if the old driver does only output # mono sound. # # options BKTR_USE_FREEBSD_SMBUS # Compile with FreeBSD SMBus implementation # # Brooktree driver has been ported to the new I2C framework. Thus, # you'll need to have the following 3 lines in the kernel config. # device smbus # device iicbus # device iicbb # device iicsmb # The iic and smb devices are only needed if you want to control other # I2C slaves connected to the external connector of some cards. # device bktr # # PC Card/PCMCIA and Cardbus # # cbb: pci/cardbus bridge implementing YENTA interface # pccard: pccard slots # cardbus: cardbus slots device cbb device pccard device cardbus # # MMC/SD # # mmc MMC/SD bus # mmcsd MMC/SD memory card # sdhci Generic PCI SD Host Controller # device mmc device mmcsd device sdhci # # SMB bus # # System Management Bus support is provided by the 'smbus' device. # Access to the SMBus device is via the 'smb' device (/dev/smb*), # which is a child of the 'smbus' device. # # Supported devices: # smb standard I/O through /dev/smb* # # Supported SMB interfaces: # iicsmb I2C to SMB bridge with any iicbus interface # bktr brooktree848 I2C hardware interface # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit # amdpm AMD 756 Power Management Unit # amdsmb AMD 8111 SMBus 2.0 Controller # nfpm NVIDIA nForce Power Management Unit # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller # ismt Intel SMBus 2.0 controller chips (on Atom S1200, C2000) # device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device viapm device amdpm device amdsmb device nfpm device nfsmb device ismt device smb # SMBus peripheral devices # # jedec_dimm Asset and temperature reporting for DDR3 and DDR4 DIMMs # device jedec_dimm # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported devices: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. # iicoc simple polling driver for OpenCores I2C controller # # Supported interfaces: # bktr brooktree848 I2C software interface # # Other: # iicbb generic I2C bit-banging code (needed by lpbb, bktr) # device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge device iicoc # OpenCores I2C controller support # I2C peripheral devices # device ad7418 # Analog Devices temp and voltage sensor device ds1307 # Dallas DS1307 RTC and compatible device ds13rtc # All Dallas/Maxim ds13xx chips device ds1672 # Dallas DS1672 RTC device ds3231 # Dallas DS3231 RTC + temperature device icee # AT24Cxxx and compatible EEPROMs device isl12xx # Intersil ISL12xx RTC device lm75 # LM75 compatible temperature sensor device nxprtc # NXP RTCs: PCA/PFC212x PCA/PCF85xx device rtc8583 # Epson RTC-8583 device s35390a # Seiko Instruments S-35390A RTC device sy8106a # Silergy Corp. SY8106A buck regulator device syr827 # Silergy Corp. DC/DC regulator # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. # Multiple devices may be attached to the parallel port, devices # are automatically probed and attached when found. # # Supported devices: # vpo Iomega Zip Drive # Requires SCSI disk support ('scbus' and 'da'), best # performance is achieved with ports in EPP 1.9 mode. # lpt Parallel Printer # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O # pps Pulse per second Timing Interface # lpbb Philips official parallel port I2C bit-banging interface # pcfclock Parallel port clock driver. # # Supported interfaces: # ppc ISA-bus parallel port interfaces. # options PPC_PROBE_CHIPSET # Enable chipset specific detection # (see flags in ppc(4)) options DEBUG_1284 # IEEE1284 signaling protocol debug options PERIPH_1284 # Makes your computer act as an IEEE1284 # compliant peripheral options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices options VP0_DEBUG # ZIP/ZIP+ debug options LPT_DEBUG # Printer driver debug options PPC_DEBUG # Parallel chipset level debug options PLIP_DEBUG # Parallel network IP interface debug options PCFCLOCK_VERBOSE # Verbose pcfclock driver options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10) device ppc hint.ppc.0.at="isa" hint.ppc.0.irq="7" device ppbus device vpo device lpt device plip device ppi device pps device lpbb device pcfclock # General Purpose I/O pins device gpio # gpio interfaces and bus support device gpiobacklight # sysctl control of gpio-based backlight device gpioiic # i2c via gpio bitbang device gpiokeys # kbd(4) glue for gpio-based key input device gpioled # led(4) gpio glue device gpiopower # event handler for gpio-based powerdown device gpiopps # Pulse per second input from gpio pin device gpioregulator # extres/regulator glue for gpio pin device gpiospi # SPI via gpio bitbang device gpioths # 1-wire temp/humidity sensor on gpio pin # Pulse width modulation device pwmbus # pwm interface and bus support device pwmc # userland control access to pwm outputs # # Etherswitch framework and drivers # # etherswitch The etherswitch(4) framework # miiproxy Proxy device for miibus(4) functionality # # Switch hardware support: # arswitch Atheros switches # ip17x IC+ 17x family switches # rtl8366r Realtek RTL8366 switches # ukswitch Multi-PHY switches # device etherswitch device miiproxy device arswitch device ip17x device rtl8366rb device ukswitch # Kernel BOOTP support options BOOTP # Use BOOTP to obtain IP address/hostname # Requires NFSCL and NFS_ROOT options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info options BOOTP_NFSV3 # Use NFS v3 to NFS mount root options BOOTP_COMPAT # Workaround for broken bootp daemons. options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP options BOOTP_BLOCKSIZE=8192 # Override NFS block size # # Enable software watchdog routines, even if hardware watchdog is present. # By default, software watchdog timer is enabled only if no hardware watchdog # is present. # options SW_WATCHDOG # # Add the software deadlock resolver thread. # options DEADLKRES # # Disable swapping of stack pages. This option removes all # code which actually performs swapping, so it's not possible to turn # it back on at run-time. # # This is sometimes usable for systems which don't have any swap space # (see also sysctl "vm.disable_swapspace_pageouts") # #options NO_SWAPPING # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers # for sendfile(2) that are used to map file VM pages, and normally # default to a quantity that is roughly 16*MAXUSERS+512. You would # typically want about 4 of these for each simultaneous file send. # options NSFBUFS=1024 # # Enable extra debugging code for locks. This stores the filename and # line of whatever acquired the lock in the lock itself, and changes a # number of function calls to pass around the relevant data. This is # not at all useful unless you are debugging lock code. Note that # modules should be recompiled as this option modifies KBI. # options DEBUG_LOCKS ##################################################################### # USB support # UHCI controller device uhci # OHCI controller device ohci # EHCI controller device ehci # XHCI controller device xhci # SL811 Controller #device slhci # General USB code (mandatory for USB) device usb # # USB Double Bulk Pipe devices device udbp # USB Fm Radio device ufm # USB temperature meter device ugold # USB LED device uled # Human Interface Device (anything with buttons and dials) device uhid # USB keyboard device ukbd # USB printer device ulpt # USB mass storage driver (Requires scbus and da) device umass # USB mass storage driver for device-side mode device usfs # USB support for Belkin F5U109 and Magic Control Technology serial adapters device umct # USB modem support device umodem # USB mouse device ums # USB touchpad(s) device atp device wsp # eGalax USB touch screen device uep # Diamond Rio 500 MP3 player device urio # # USB serial support device ucom # USB support for 3G modem cards by Option, Novatel, Huawei and Sierra device u3g # USB support for Technologies ARK3116 based serial adapters device uark # USB support for Belkin F5U103 and compatible serial adapters device ubsa # USB support for serial adapters based on the FT8U100AX and FT8U232AM device uftdi # USB support for some Windows CE based serial communication. device uipaq # USB support for Prolific PL-2303 serial adapters device uplcom # USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters device uslcom # USB Visor and Palm devices device uvisor # USB serial support for DDI pocket's PHS device uvscom # # USB ethernet support device uether # ADMtek USB ethernet. Supports the LinkSys USB100TX, # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus # eval board. device aue # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the # LinkSys USB200M and various other adapters. device axe # ASIX Electronics AX88178A/AX88179 USB 2.0/3.0 gigabit ethernet driver. device axge # # Devices which communicate using Ethernet over USB, particularly # Communication Device Class (CDC) Ethernet specification. Supports # Sharp Zaurus PDAs, some DOCSIS cable modems and so on. device cdce # # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate # and Netmate II, and the Belkin F5U111. device cue # # Kawasaki LSI ethernet. Supports the LinkSys USB10T, # Entrega USB-NET-E45, Peracom Ethernet Adapter, the # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T, # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB # and 2104USB, and the Corega USB-T. device kue # # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX # and the GREEN HOUSE GH-USB100B. device rue # # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC. device udav # # RealTek RTL8152/RTL8153 USB Ethernet driver device ure # # Moschip MCS7730/MCS7840 USB to fast ethernet. Supports the Sitecom LN030. device mos # # HSxPA devices from Option N.V device uhso # Realtek RTL8188SU/RTL8191SU/RTL8192SU wireless driver device rsu # # Ralink Technology RT2501USB/RT2601USB wireless driver device rum # Ralink Technology RT2700U/RT2800U/RT3000U wireless driver device run # # Atheros AR5523 wireless driver device uath # # Conexant/Intersil PrismGT wireless driver device upgt # # Ralink Technology RT2500USB wireless driver device ural # # RNDIS USB ethernet driver device urndis # Realtek RTL8187B/L wireless driver device urtw # # ZyDas ZD1211/ZD1211B wireless driver device zyd # # Sierra USB wireless driver device usie # # debugging options for the USB subsystem # options USB_DEBUG options U3G_DEBUG # options for ukbd: options UKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions UKBD_DFLT_KEYMAP=jp.106 # options for uplcom: options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds # options for uvscom: options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds ##################################################################### # FireWire support device firewire # FireWire bus code device sbp # SCSI over Firewire (Requires scbus and da) device sbp_targ # SBP-2 Target mode (Requires scbus and targ) device fwe # Ethernet over FireWire (non-standard!) device fwip # IP over FireWire (RFC2734 and RFC3146) ##################################################################### # dcons support (Dumb Console Device) device dcons # dumb console driver device dcons_crom # FireWire attachment options DCONS_BUF_SIZE=16384 # buffer size options DCONS_POLL_HZ=100 # polling rate options DCONS_FORCE_CONSOLE=0 # force to be the primary console options DCONS_FORCE_GDB=1 # force to be the gdb device ##################################################################### # crypto subsystem # # This is a port of the OpenBSD crypto framework. Include this when # configuring IPSEC and when you have a h/w crypto device to accelerate # user applications that link to OpenSSL. # # Drivers are ports from OpenBSD with some simple enhancements that have # been fed back to OpenBSD. device crypto # core crypto support # Only install the cryptodev device if you are running tests, or know # specifically why you need it. In most cases, it is not needed and # will make things slower. device cryptodev # /dev/crypto for access to h/w device rndtest # FIPS 140-2 entropy tester device ccr # Chelsio T6 device hifn # Hifn 7951, 7781, etc. options HIFN_DEBUG # enable debugging support: hw.hifn.debug options HIFN_RNDTEST # enable rndtest support device ubsec # Broadcom 5501, 5601, 58xx options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug options UBSEC_RNDTEST # enable rndtest support ##################################################################### # # Embedded system options: # # An embedded system might want to run something other than init. options INIT_PATH=/sbin/init:/rescue/init # Debug options options BUS_DEBUG # enable newbus debugging options DEBUG_VFS_LOCKS # enable VFS lock debugging options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking options IFMEDIA_DEBUG # enable debugging in net/if_media.c # # Verbose SYSINIT # # Make the SYSINIT process performed by mi_startup() verbose. This is very # useful when porting to a new architecture. If DDB is also enabled, this # will print function names instead of addresses. If defined with a value # of zero, the verbose code is compiled-in but disabled by default, and can # be enabled with the debug.verbose_sysinit=1 tunable. options VERBOSE_SYSINIT ##################################################################### # SYSV IPC KERNEL PARAMETERS # # Maximum number of System V semaphores that can be used on the system at # one time. options SEMMNI=11 # Total number of semaphores system wide options SEMMNS=61 # Total number of undo structures in system options SEMMNU=31 # Maximum number of System V semaphores that can be used by a single process # at one time. options SEMMSL=61 # Maximum number of operations that can be outstanding on a single System V # semaphore at one time. options SEMOPM=101 # Maximum number of undo operations that can be outstanding on a single # System V semaphore at one time. options SEMUME=11 # Maximum number of shared memory pages system wide. options SHMALL=1025 # Maximum size, in bytes, of a single System V shared memory region. options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) options SHMMAXPGS=1025 # Minimum size, in bytes, of a single System V shared memory region. options SHMMIN=2 # Maximum number of shared memory regions that can be used on the system # at one time. options SHMMNI=33 # Maximum number of System V shared memory regions that can be attached to # a single process at one time. options SHMSEG=9 # Set the amount of time (in seconds) the system will wait before # rebooting automatically when a kernel panic occurs. If set to (-1), # the system will wait indefinitely until a key is pressed on the # console. options PANIC_REBOOT_WAIT_TIME=16 # Attempt to bypass the buffer cache and put data directly into the # userland buffer for read operation when O_DIRECT flag is set on the # file. Both offset and length of the read operation must be # multiples of the physical media sector size. # options DIRECTIO # Specify a lower limit for the number of swap I/O buffers. They are # (among other things) used when bypassing the buffer cache due to # DIRECTIO kernel option enabled and O_DIRECT flag set on file. # options NSWBUF_MIN=120 ##################################################################### # More undocumented options for linting. # Note that documenting these is not considered an affront. options CAM_DEBUG_DELAY # VFS cluster debugging. options CLUSTERDEBUG options DEBUG # Kernel filelock debugging. options LOCKF_DEBUG # System V compatible message queues # Please note that the values provided here are used to test kernel # building. The defaults in the sources provide almost the same numbers. # MSGSSZ must be a power of 2 between 8 and 1024. options MSGMNB=2049 # Max number of chars in queue options MSGMNI=41 # Max number of message queue identifiers options MSGSEG=2049 # Max number of message segments options MSGSSZ=16 # Size of a message segment options MSGTQL=41 # Max number of messages in system options NBUF=512 # Number of buffer headers options SC_DEBUG_LEVEL=5 # Syscons debug level options SC_RENDER_DEBUG # syscons rendering debugging options VFS_BIO_DEBUG # VFS buffer I/O debugging options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack options KSTACK_USAGE_PROF # Adaptec Array Controller driver options options AAC_DEBUG # Debugging levels: # 0 - quiet, only emit warnings # 1 - noisy, emit major function # points and things done # 2 - extremely noisy, emit trace # items in loops, etc. # Resource Accounting options RACCT # Resource Limits options RCTL # Yet more undocumented options for linting. # BKTR_ALLOC_PAGES has no effect except to cause warnings, and # BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the # driver still mostly spells this option BROOKTREE_ALLOC_PAGES. ##options BKTR_ALLOC_PAGES=(217*4+1) options BROOKTREE_ALLOC_PAGES=(217*4+1) options MAXFILES=999 # Random number generator # Allow the CSPRNG algorithm to be loaded as a module. #options RANDOM_LOADABLE # Select this to allow high-rate but potentially expensive # harvesting of Slab-Allocator entropy. In very high-rate # situations the value of doing this is dubious at best. options RANDOM_ENABLE_UMA # slab allocator # Select this to allow high-rate but potentially expensive # harvesting of of the m_next pointer in the mbuf. Note that # the m_next pointer is NULL except when receiving > 4K # jumbo frames or sustained bursts by way of LRO. Thus in # the common case it is stirring zero in to the entropy # pool. In cases where it is not NULL it is pointing to one # of a small (in the thousands to 10s of thousands) number # of 256 byte aligned mbufs. Hence it is, even in the best # case, a poor source of entropy. And in the absence of actual # runtime analysis of entropy collection may mislead the user in # to believe that substantially more entropy is being collected # than in fact is - leading to a different class of security # risk. In high packet rate situations ethernet entropy # collection is also very expensive, possibly leading to as # much as a 50% drop in packets received. # This option is present to maintain backwards compatibility # if desired, however it cannot be recommended for use in any # environment. options RANDOM_ENABLE_ETHER # ether_input # Module to enable execution of application via emulators like QEMU options IMAGACT_BINMISC # zlib I/O stream support # This enables support for compressed core dumps. options GZIO # zstd I/O stream support # This enables support for Zstd compressed core dumps. options ZSTDIO # BHND(4) drivers options BHND_LOGLEVEL # Logging threshold level # evdev interface device evdev # input event device support options EVDEV_SUPPORT # evdev support in legacy drivers options EVDEV_DEBUG # enable event debug msgs device uinput # install /dev/uinput cdev options UINPUT_DEBUG # enable uinput debug msgs # Encrypted kernel crash dumps. options EKCD # Serial Peripheral Interface (SPI) support. device spibus # Bus support. device at45d # DataFlash driver device cqspi # device mx25l # SPIFlash driver device n25q # device spigen # Generic access to SPI devices from userland. # Enable legacy /dev/spigenN name aliases for /dev/spigenX.Y devices. options SPIGEN_LEGACY_CDEVNAME # legacy device names for spigen +# Compression supports. +device zlib # gzip/zlib compression/decompression library device xz # xz_embedded LZMA de-compression library Index: head/sys/conf/files =================================================================== --- head/sys/conf/files (revision 350495) +++ head/sys/conf/files (revision 350496) @@ -1,4927 +1,4949 @@ # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # acpi_quirks.h optional acpi \ dependency "$S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ compile-with "${AWK} -f $S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ no-obj no-implicit-rule before-depend \ clean "acpi_quirks.h" bhnd_nvram_map.h optional bhnd \ dependency "$S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/tools/nvram_map_gen.awk $S/dev/bhnd/nvram/nvram_map" \ compile-with "sh $S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/nvram/nvram_map -h" \ no-obj no-implicit-rule before-depend \ clean "bhnd_nvram_map.h" bhnd_nvram_map_data.h optional bhnd \ dependency "$S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/tools/nvram_map_gen.awk $S/dev/bhnd/nvram/nvram_map" \ compile-with "sh $S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/nvram/nvram_map -d" \ no-obj no-implicit-rule before-depend \ clean "bhnd_nvram_map_data.h" fdt_static_dtb.h optional fdt fdt_dtb_static \ compile-with "sh -c 'MACHINE=${MACHINE} $S/tools/fdt/make_dtbh.sh ${FDT_DTS_FILE} ${.CURDIR}'" \ dependency "${FDT_DTS_FILE:T:R}.dtb" \ no-obj no-implicit-rule before-depend \ clean "fdt_static_dtb.h" feeder_eq_gen.h optional sound \ dependency "$S/tools/sound/feeder_eq_mkfilter.awk" \ compile-with "${AWK} -f $S/tools/sound/feeder_eq_mkfilter.awk -- ${FEEDER_EQ_PRESETS} > feeder_eq_gen.h" \ no-obj no-implicit-rule before-depend \ clean "feeder_eq_gen.h" feeder_rate_gen.h optional sound \ dependency "$S/tools/sound/feeder_rate_mkfilter.awk" \ compile-with "${AWK} -f $S/tools/sound/feeder_rate_mkfilter.awk -- ${FEEDER_RATE_PRESETS} > feeder_rate_gen.h" \ no-obj no-implicit-rule before-depend \ clean "feeder_rate_gen.h" snd_fxdiv_gen.h optional sound \ dependency "$S/tools/sound/snd_fxdiv_gen.awk" \ compile-with "${AWK} -f $S/tools/sound/snd_fxdiv_gen.awk -- > snd_fxdiv_gen.h" \ no-obj no-implicit-rule before-depend \ clean "snd_fxdiv_gen.h" miidevs.h optional miibus | mii \ dependency "$S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ compile-with "${AWK} -f $S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ no-obj no-implicit-rule before-depend \ clean "miidevs.h" pccarddevs.h standard \ dependency "$S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ compile-with "${AWK} -f $S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ no-obj no-implicit-rule before-depend \ clean "pccarddevs.h" kbdmuxmap.h optional kbdmux_dflt_keymap \ compile-with "kbdcontrol -P ${S:S/sys$/share/}/vt/keymaps -P ${S:S/sys$/share/}/syscons/keymaps -L ${KBDMUX_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > kbdmuxmap.h" \ no-obj no-implicit-rule before-depend \ clean "kbdmuxmap.h" teken_state.h optional sc | vt \ dependency "$S/teken/gensequences $S/teken/sequences" \ compile-with "${AWK} -f $S/teken/gensequences $S/teken/sequences > teken_state.h" \ no-obj no-implicit-rule before-depend \ clean "teken_state.h" usbdevs.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -h" \ no-obj no-implicit-rule before-depend \ clean "usbdevs.h" usbdevs_data.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -d" \ no-obj no-implicit-rule before-depend \ clean "usbdevs_data.h" sdiodevs.h optional mmccam \ dependency "$S/tools/sdiodevs2h.awk $S/dev/sdio/sdiodevs" \ compile-with "${AWK} -f $S/tools/sdiodevs2h.awk $S/dev/sdio/sdiodevs -h" \ no-obj no-implicit-rule before-depend \ clean "sdiodevs.h" sdiodevs_data.h optional mmccam \ dependency "$S/tools/sdiodevs2h.awk $S/dev/sdio/sdiodevs" \ compile-with "${AWK} -f $S/tools/sdiodevs2h.awk $S/dev/sdio/sdiodevs -d" \ no-obj no-implicit-rule before-depend \ clean "sdiodevs_data.h" cam/cam.c optional scbus cam/cam_compat.c optional scbus cam/cam_iosched.c optional scbus cam/cam_periph.c optional scbus cam/cam_queue.c optional scbus cam/cam_sim.c optional scbus cam/cam_xpt.c optional scbus cam/ata/ata_all.c optional scbus cam/ata/ata_xpt.c optional scbus cam/ata/ata_pmp.c optional scbus cam/nvme/nvme_all.c optional scbus cam/nvme/nvme_da.c optional nda | da cam/nvme/nvme_xpt.c optional scbus cam/scsi/scsi_xpt.c optional scbus cam/scsi/scsi_all.c optional scbus cam/scsi/scsi_cd.c optional cd cam/scsi/scsi_ch.c optional ch cam/ata/ata_da.c optional ada | da cam/ctl/ctl.c optional ctl cam/ctl/ctl_backend.c optional ctl cam/ctl/ctl_backend_block.c optional ctl cam/ctl/ctl_backend_ramdisk.c optional ctl cam/ctl/ctl_cmd_table.c optional ctl cam/ctl/ctl_frontend.c optional ctl cam/ctl/ctl_frontend_cam_sim.c optional ctl cam/ctl/ctl_frontend_ioctl.c optional ctl cam/ctl/ctl_frontend_iscsi.c optional ctl cfiscsi cam/ctl/ctl_ha.c optional ctl cam/ctl/ctl_scsi_all.c optional ctl cam/ctl/ctl_tpc.c optional ctl cam/ctl/ctl_tpc_local.c optional ctl cam/ctl/ctl_error.c optional ctl cam/ctl/ctl_util.c optional ctl cam/ctl/scsi_ctl.c optional ctl cam/mmc/mmc_xpt.c optional scbus mmccam cam/mmc/mmc_da.c optional scbus mmccam da cam/scsi/scsi_da.c optional da cam/scsi/scsi_pass.c optional pass cam/scsi/scsi_pt.c optional pt cam/scsi/scsi_sa.c optional sa cam/scsi/scsi_enc.c optional ses cam/scsi/scsi_enc_ses.c optional ses cam/scsi/scsi_enc_safte.c optional ses cam/scsi/scsi_sg.c optional sg cam/scsi/scsi_targ_bh.c optional targbh cam/scsi/scsi_target.c optional targ cam/scsi/smp_all.c optional scbus # shared between zfs and dtrace cddl/compat/opensolaris/kern/opensolaris.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_cmn_err.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_kmem.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_misc.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_proc.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_sunddi.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_taskq.c optional zfs | dtrace compile-with "${CDDL_C}" # zfs specific cddl/compat/opensolaris/kern/opensolaris_acl.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_dtrace.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_kobj.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_kstat.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_lookup.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_policy.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_string.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_sysevent.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_uio.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_vfs.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_vm.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_zone.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/acl/acl_common.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/avl/avl.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/nvpair/opensolaris_fnvpair.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/nvpair/opensolaris_nvpair.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/nvpair/opensolaris_nvpair_alloc_fixed.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/unicode/u8_textprep.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfeature_common.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_comutil.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_deleg.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_fletcher.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_ioctl_compat.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_namecheck.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_prop.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zpool_prop.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zprop_common.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/vnode.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/abd.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/aggsum.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/blkptr.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/bplist.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/bpobj.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/bptree.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/bqueue.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/cityhash.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf_stats.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/ddt.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/ddt_zap.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_diff.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_object.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_send.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_traverse.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_tx.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_zfetch.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dnode.c optional zfs compile-with "${ZFS_C}" \ warning "kernel contains CDDL licensed ZFS filesystem" cddl/contrib/opensolaris/uts/common/fs/zfs/dnode_sync.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_bookmark.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deadlist.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deleg.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_destroy.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_pool.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_scan.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_userhold.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_synctask.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/gzip.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lz4.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lzjb.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/multilist.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/range_tree.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/refcount.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/rrwlock.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/sha256.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/skein_zfs.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_checkpoint.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_config.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_errlog.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_history.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_misc.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/space_map.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/space_reftree.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/trim_map.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/txg.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/uberblock.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/unique.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_cache.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_file.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_indirect.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_indirect_births.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_indirect_mapping.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_initialize.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_label.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_mirror.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_missing.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_queue.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_raidz.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_removal.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_root.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp_get.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp_global.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp_iter.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp_synctask.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfeature.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_acl.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_byteswap.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ctldir.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_debug.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_dir.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_fm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_fuid.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_log.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_onexit.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_replay.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_rlock.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_sa.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vnops.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_znode.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zil.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zio.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zio_checksum.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zio_compress.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zio_inject.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zle.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zrlock.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zthr.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zvol.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/callb.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/fm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/list.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/nvpair_alloc_system.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/adler32.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/deflate.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/inffast.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/inflate.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/inftrees.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/trees.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/zmod.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/zutil.c optional zfs compile-with "${ZFS_C}" +cddl/contrib/opensolaris/uts/common/zmod/zmod.c optional zfs compile-with "${ZFS_C} ${ZLIB_CFLAGS}" # zfs lua support cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lapi.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lauxlib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lbaselib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lbitlib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lcode.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lcompat.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lcorolib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lctype.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ldebug.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ldo.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ldump.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lfunc.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lgc.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/llex.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lmem.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lobject.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lopcodes.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lparser.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lstate.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lstring.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lstrlib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ltable.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ltablib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ltm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lundump.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lvm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lzio.c optional zfs compile-with "${ZFS_C}" # dtrace specific cddl/contrib/opensolaris/uts/common/dtrace/dtrace.c optional dtrace compile-with "${DTRACE_C}" \ warning "kernel contains CDDL licensed DTRACE" cddl/contrib/opensolaris/uts/common/dtrace/dtrace_xoroshiro128_plus.c optional dtrace compile-with "${DTRACE_C}" cddl/dev/dtmalloc/dtmalloc.c optional dtmalloc | dtraceall compile-with "${CDDL_C}" cddl/dev/profile/profile.c optional dtrace_profile | dtraceall compile-with "${CDDL_C}" cddl/dev/sdt/sdt.c optional dtrace_sdt | dtraceall compile-with "${CDDL_C}" cddl/dev/fbt/fbt.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}" cddl/dev/systrace/systrace.c optional dtrace_systrace | dtraceall compile-with "${CDDL_C}" cddl/dev/prototype.c optional dtrace_prototype | dtraceall compile-with "${CDDL_C}" fs/nfsclient/nfs_clkdtrace.c optional dtnfscl nfscl | dtraceall nfscl compile-with "${CDDL_C}" compat/cloudabi/cloudabi_clock.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_errno.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_fd.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_file.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_futex.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_mem.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_proc.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_random.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_sock.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_thread.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_vdso.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi32/cloudabi32_fd.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_module.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_poll.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_sock.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_syscalls.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_sysent.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_thread.c optional compat_cloudabi32 compat/cloudabi64/cloudabi64_fd.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_module.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_poll.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_sock.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_syscalls.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_sysent.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_thread.c optional compat_cloudabi64 compat/freebsd32/freebsd32_capability.c optional compat_freebsd32 compat/freebsd32/freebsd32_ioctl.c optional compat_freebsd32 compat/freebsd32/freebsd32_misc.c optional compat_freebsd32 compat/freebsd32/freebsd32_syscalls.c optional compat_freebsd32 compat/freebsd32/freebsd32_sysent.c optional compat_freebsd32 contrib/ck/src/ck_array.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_centralized.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_combining.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_dissemination.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_mcs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_tournament.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_epoch.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_hp.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_hs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_ht.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_rhs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/dev/acpica/common/ahids.c optional acpi acpi_debug contrib/dev/acpica/common/ahuuids.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbcmds.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbconvert.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbdisply.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbexec.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbhistry.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbinput.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbmethod.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbnames.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbobject.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbstats.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbtest.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbutils.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbxface.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmbuffer.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmcstyle.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmdeferred.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmnames.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmopcode.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrc.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcl.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcl2.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcs.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmutils.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmwalk.c optional acpi acpi_debug contrib/dev/acpica/components/dispatcher/dsargs.c optional acpi contrib/dev/acpica/components/dispatcher/dscontrol.c optional acpi contrib/dev/acpica/components/dispatcher/dsdebug.c optional acpi contrib/dev/acpica/components/dispatcher/dsfield.c optional acpi contrib/dev/acpica/components/dispatcher/dsinit.c optional acpi contrib/dev/acpica/components/dispatcher/dsmethod.c optional acpi contrib/dev/acpica/components/dispatcher/dsmthdat.c optional acpi contrib/dev/acpica/components/dispatcher/dsobject.c optional acpi contrib/dev/acpica/components/dispatcher/dsopcode.c optional acpi contrib/dev/acpica/components/dispatcher/dspkginit.c optional acpi contrib/dev/acpica/components/dispatcher/dsutils.c optional acpi contrib/dev/acpica/components/dispatcher/dswexec.c optional acpi contrib/dev/acpica/components/dispatcher/dswload.c optional acpi contrib/dev/acpica/components/dispatcher/dswload2.c optional acpi contrib/dev/acpica/components/dispatcher/dswscope.c optional acpi contrib/dev/acpica/components/dispatcher/dswstate.c optional acpi contrib/dev/acpica/components/events/evevent.c optional acpi contrib/dev/acpica/components/events/evglock.c optional acpi contrib/dev/acpica/components/events/evgpe.c optional acpi contrib/dev/acpica/components/events/evgpeblk.c optional acpi contrib/dev/acpica/components/events/evgpeinit.c optional acpi contrib/dev/acpica/components/events/evgpeutil.c optional acpi contrib/dev/acpica/components/events/evhandler.c optional acpi contrib/dev/acpica/components/events/evmisc.c optional acpi contrib/dev/acpica/components/events/evregion.c optional acpi contrib/dev/acpica/components/events/evrgnini.c optional acpi contrib/dev/acpica/components/events/evsci.c optional acpi contrib/dev/acpica/components/events/evxface.c optional acpi contrib/dev/acpica/components/events/evxfevnt.c optional acpi contrib/dev/acpica/components/events/evxfgpe.c optional acpi contrib/dev/acpica/components/events/evxfregn.c optional acpi contrib/dev/acpica/components/executer/exconcat.c optional acpi contrib/dev/acpica/components/executer/exconfig.c optional acpi contrib/dev/acpica/components/executer/exconvrt.c optional acpi contrib/dev/acpica/components/executer/excreate.c optional acpi contrib/dev/acpica/components/executer/exdebug.c optional acpi contrib/dev/acpica/components/executer/exdump.c optional acpi contrib/dev/acpica/components/executer/exfield.c optional acpi contrib/dev/acpica/components/executer/exfldio.c optional acpi contrib/dev/acpica/components/executer/exmisc.c optional acpi contrib/dev/acpica/components/executer/exmutex.c optional acpi contrib/dev/acpica/components/executer/exnames.c optional acpi contrib/dev/acpica/components/executer/exoparg1.c optional acpi contrib/dev/acpica/components/executer/exoparg2.c optional acpi contrib/dev/acpica/components/executer/exoparg3.c optional acpi contrib/dev/acpica/components/executer/exoparg6.c optional acpi contrib/dev/acpica/components/executer/exprep.c optional acpi contrib/dev/acpica/components/executer/exregion.c optional acpi contrib/dev/acpica/components/executer/exresnte.c optional acpi contrib/dev/acpica/components/executer/exresolv.c optional acpi contrib/dev/acpica/components/executer/exresop.c optional acpi contrib/dev/acpica/components/executer/exserial.c optional acpi contrib/dev/acpica/components/executer/exstore.c optional acpi contrib/dev/acpica/components/executer/exstoren.c optional acpi contrib/dev/acpica/components/executer/exstorob.c optional acpi contrib/dev/acpica/components/executer/exsystem.c optional acpi contrib/dev/acpica/components/executer/extrace.c optional acpi contrib/dev/acpica/components/executer/exutils.c optional acpi contrib/dev/acpica/components/hardware/hwacpi.c optional acpi contrib/dev/acpica/components/hardware/hwesleep.c optional acpi contrib/dev/acpica/components/hardware/hwgpe.c optional acpi contrib/dev/acpica/components/hardware/hwpci.c optional acpi contrib/dev/acpica/components/hardware/hwregs.c optional acpi contrib/dev/acpica/components/hardware/hwsleep.c optional acpi contrib/dev/acpica/components/hardware/hwtimer.c optional acpi contrib/dev/acpica/components/hardware/hwvalid.c optional acpi contrib/dev/acpica/components/hardware/hwxface.c optional acpi contrib/dev/acpica/components/hardware/hwxfsleep.c optional acpi contrib/dev/acpica/components/namespace/nsaccess.c optional acpi contrib/dev/acpica/components/namespace/nsalloc.c optional acpi contrib/dev/acpica/components/namespace/nsarguments.c optional acpi contrib/dev/acpica/components/namespace/nsconvert.c optional acpi contrib/dev/acpica/components/namespace/nsdump.c optional acpi contrib/dev/acpica/components/namespace/nseval.c optional acpi contrib/dev/acpica/components/namespace/nsinit.c optional acpi contrib/dev/acpica/components/namespace/nsload.c optional acpi contrib/dev/acpica/components/namespace/nsnames.c optional acpi contrib/dev/acpica/components/namespace/nsobject.c optional acpi contrib/dev/acpica/components/namespace/nsparse.c optional acpi contrib/dev/acpica/components/namespace/nspredef.c optional acpi contrib/dev/acpica/components/namespace/nsprepkg.c optional acpi contrib/dev/acpica/components/namespace/nsrepair.c optional acpi contrib/dev/acpica/components/namespace/nsrepair2.c optional acpi contrib/dev/acpica/components/namespace/nssearch.c optional acpi contrib/dev/acpica/components/namespace/nsutils.c optional acpi contrib/dev/acpica/components/namespace/nswalk.c optional acpi contrib/dev/acpica/components/namespace/nsxfeval.c optional acpi contrib/dev/acpica/components/namespace/nsxfname.c optional acpi contrib/dev/acpica/components/namespace/nsxfobj.c optional acpi contrib/dev/acpica/components/parser/psargs.c optional acpi contrib/dev/acpica/components/parser/psloop.c optional acpi contrib/dev/acpica/components/parser/psobject.c optional acpi contrib/dev/acpica/components/parser/psopcode.c optional acpi contrib/dev/acpica/components/parser/psopinfo.c optional acpi contrib/dev/acpica/components/parser/psparse.c optional acpi contrib/dev/acpica/components/parser/psscope.c optional acpi contrib/dev/acpica/components/parser/pstree.c optional acpi contrib/dev/acpica/components/parser/psutils.c optional acpi contrib/dev/acpica/components/parser/pswalk.c optional acpi contrib/dev/acpica/components/parser/psxface.c optional acpi contrib/dev/acpica/components/resources/rsaddr.c optional acpi contrib/dev/acpica/components/resources/rscalc.c optional acpi contrib/dev/acpica/components/resources/rscreate.c optional acpi contrib/dev/acpica/components/resources/rsdump.c optional acpi acpi_debug contrib/dev/acpica/components/resources/rsdumpinfo.c optional acpi contrib/dev/acpica/components/resources/rsinfo.c optional acpi contrib/dev/acpica/components/resources/rsio.c optional acpi contrib/dev/acpica/components/resources/rsirq.c optional acpi contrib/dev/acpica/components/resources/rslist.c optional acpi contrib/dev/acpica/components/resources/rsmemory.c optional acpi contrib/dev/acpica/components/resources/rsmisc.c optional acpi contrib/dev/acpica/components/resources/rsserial.c optional acpi contrib/dev/acpica/components/resources/rsutils.c optional acpi contrib/dev/acpica/components/resources/rsxface.c optional acpi contrib/dev/acpica/components/tables/tbdata.c optional acpi contrib/dev/acpica/components/tables/tbfadt.c optional acpi contrib/dev/acpica/components/tables/tbfind.c optional acpi contrib/dev/acpica/components/tables/tbinstal.c optional acpi contrib/dev/acpica/components/tables/tbprint.c optional acpi contrib/dev/acpica/components/tables/tbutils.c optional acpi contrib/dev/acpica/components/tables/tbxface.c optional acpi contrib/dev/acpica/components/tables/tbxfload.c optional acpi contrib/dev/acpica/components/tables/tbxfroot.c optional acpi contrib/dev/acpica/components/utilities/utaddress.c optional acpi contrib/dev/acpica/components/utilities/utalloc.c optional acpi contrib/dev/acpica/components/utilities/utascii.c optional acpi contrib/dev/acpica/components/utilities/utbuffer.c optional acpi contrib/dev/acpica/components/utilities/utcache.c optional acpi contrib/dev/acpica/components/utilities/utcopy.c optional acpi contrib/dev/acpica/components/utilities/utdebug.c optional acpi contrib/dev/acpica/components/utilities/utdecode.c optional acpi contrib/dev/acpica/components/utilities/utdelete.c optional acpi contrib/dev/acpica/components/utilities/uterror.c optional acpi contrib/dev/acpica/components/utilities/uteval.c optional acpi contrib/dev/acpica/components/utilities/utexcep.c optional acpi contrib/dev/acpica/components/utilities/utglobal.c optional acpi contrib/dev/acpica/components/utilities/uthex.c optional acpi contrib/dev/acpica/components/utilities/utids.c optional acpi contrib/dev/acpica/components/utilities/utinit.c optional acpi contrib/dev/acpica/components/utilities/utlock.c optional acpi contrib/dev/acpica/components/utilities/utmath.c optional acpi contrib/dev/acpica/components/utilities/utmisc.c optional acpi contrib/dev/acpica/components/utilities/utmutex.c optional acpi contrib/dev/acpica/components/utilities/utnonansi.c optional acpi contrib/dev/acpica/components/utilities/utobject.c optional acpi contrib/dev/acpica/components/utilities/utosi.c optional acpi contrib/dev/acpica/components/utilities/utownerid.c optional acpi contrib/dev/acpica/components/utilities/utpredef.c optional acpi contrib/dev/acpica/components/utilities/utresdecode.c optional acpi acpi_debug contrib/dev/acpica/components/utilities/utresrc.c optional acpi contrib/dev/acpica/components/utilities/utstate.c optional acpi contrib/dev/acpica/components/utilities/utstring.c optional acpi contrib/dev/acpica/components/utilities/utstrsuppt.c optional acpi contrib/dev/acpica/components/utilities/utstrtoul64.c optional acpi contrib/dev/acpica/components/utilities/utuuid.c optional acpi acpi_debug contrib/dev/acpica/components/utilities/utxface.c optional acpi contrib/dev/acpica/components/utilities/utxferror.c optional acpi contrib/dev/acpica/components/utilities/utxfinit.c optional acpi contrib/dev/acpica/os_specific/service_layers/osgendbg.c optional acpi acpi_debug contrib/ipfilter/netinet/fil.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_auth.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_fil_freebsd.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_frag.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_log.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_nat.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_proxy.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_state.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_lookup.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -Wno-error -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_pool.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_htable.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter ${NO_WTAUTOLOGICAL_POINTER_COMPARE}" contrib/ipfilter/netinet/ip_sync.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/mlfk_ipl.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_nat6.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_rules.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_scan.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_dstlist.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/radix_ipf.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/libfdt/fdt.c optional fdt contrib/libfdt/fdt_ro.c optional fdt contrib/libfdt/fdt_rw.c optional fdt contrib/libfdt/fdt_strerror.c optional fdt contrib/libfdt/fdt_sw.c optional fdt contrib/libfdt/fdt_wip.c optional fdt contrib/libnv/cnvlist.c standard contrib/libnv/dnvlist.c standard contrib/libnv/nvlist.c standard contrib/libnv/nvpair.c standard contrib/ngatm/netnatm/api/cc_conn.c optional ngatm_ccatm \ compile-with "${NORMAL_C_NOWERROR} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_data.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_dump.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_port.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_sig.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_user.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/unisap.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/straddr.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/unimsg_common.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/traffic.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_ie.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_msg.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_call.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_coord.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_party.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_print.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_reset.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_unimsgcpy.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_verify.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" # xz dev/xz/xz_mod.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_crc32.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_bcj.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_lzma2.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_stream.c optional xz \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" # Zstd contrib/zstd/lib/freebsd/zstd_kmalloc.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/zstd_common.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/fse_decompress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/entropy_common.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/error_private.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/xxhash.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/fse_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/hist.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/huf_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_double_fast.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_fast.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_lazy.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_ldm.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_opt.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/decompress/zstd_ddict.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/decompress/zstd_decompress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/decompress/zstd_decompress_block.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/decompress/huf_decompress.c optional zstdio compile-with ${ZSTD_C} # Blake 2 contrib/libb2/blake2b-ref.c optional crypto | ipsec | ipsec_support \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual -DSUFFIX=_ref -Wno-unused-function" contrib/libb2/blake2s-ref.c optional crypto | ipsec | ipsec_support \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual -DSUFFIX=_ref -Wno-unused-function" crypto/blake2/blake2-sw.c optional crypto | ipsec | ipsec_support \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual" crypto/blowfish/bf_ecb.c optional ipsec | ipsec_support crypto/blowfish/bf_skey.c optional crypto | ipsec | ipsec_support crypto/camellia/camellia.c optional crypto | ipsec | ipsec_support crypto/camellia/camellia-api.c optional crypto | ipsec | ipsec_support crypto/chacha20/chacha.c optional crypto | ipsec | ipsec_support crypto/chacha20/chacha-sw.c optional crypto | ipsec | ipsec_support crypto/des/des_ecb.c optional crypto | ipsec | ipsec_support | netsmb crypto/des/des_setkey.c optional crypto | ipsec | ipsec_support | netsmb crypto/rc4/rc4.c optional netgraph_mppc_encryption | kgssapi crypto/rijndael/rijndael-alg-fst.c optional crypto | ekcd | geom_bde | \ ipsec | ipsec_support | !random_loadable | wlan_ccmp crypto/rijndael/rijndael-api-fst.c optional ekcd | geom_bde | !random_loadable crypto/rijndael/rijndael-api.c optional crypto | ipsec | ipsec_support | \ wlan_ccmp crypto/sha1.c optional carp | crypto | ether | ipsec | \ ipsec_support | netgraph_mppc_encryption | sctp crypto/sha2/sha256c.c optional crypto | ekcd | geom_bde | ipsec | \ ipsec_support | !random_loadable | sctp | zfs crypto/sha2/sha512c.c optional crypto | geom_bde | ipsec | \ ipsec_support | zfs crypto/skein/skein.c optional crypto | zfs crypto/skein/skein_block.c optional crypto | zfs crypto/siphash/siphash.c optional inet | inet6 crypto/siphash/siphash_test.c optional inet | inet6 ddb/db_access.c optional ddb ddb/db_break.c optional ddb ddb/db_capture.c optional ddb ddb/db_command.c optional ddb ddb/db_examine.c optional ddb ddb/db_expr.c optional ddb ddb/db_input.c optional ddb ddb/db_lex.c optional ddb ddb/db_main.c optional ddb ddb/db_output.c optional ddb ddb/db_print.c optional ddb ddb/db_ps.c optional ddb ddb/db_run.c optional ddb ddb/db_script.c optional ddb ddb/db_sym.c optional ddb ddb/db_thread.c optional ddb ddb/db_textdump.c optional ddb ddb/db_variables.c optional ddb ddb/db_watch.c optional ddb ddb/db_write_cmd.c optional ddb dev/aac/aac.c optional aac dev/aac/aac_cam.c optional aacp aac dev/aac/aac_debug.c optional aac dev/aac/aac_disk.c optional aac dev/aac/aac_linux.c optional aac compat_linux dev/aac/aac_pci.c optional aac pci dev/aacraid/aacraid.c optional aacraid dev/aacraid/aacraid_cam.c optional aacraid scbus dev/aacraid/aacraid_debug.c optional aacraid dev/aacraid/aacraid_linux.c optional aacraid compat_linux dev/aacraid/aacraid_pci.c optional aacraid pci dev/acpi_support/acpi_wmi.c optional acpi_wmi acpi dev/acpi_support/acpi_asus.c optional acpi_asus acpi dev/acpi_support/acpi_asus_wmi.c optional acpi_asus_wmi acpi dev/acpi_support/acpi_fujitsu.c optional acpi_fujitsu acpi dev/acpi_support/acpi_hp.c optional acpi_hp acpi dev/acpi_support/acpi_ibm.c optional acpi_ibm acpi dev/acpi_support/acpi_panasonic.c optional acpi_panasonic acpi dev/acpi_support/acpi_sony.c optional acpi_sony acpi dev/acpi_support/acpi_toshiba.c optional acpi_toshiba acpi dev/acpi_support/atk0110.c optional aibs acpi dev/acpica/Osd/OsdDebug.c optional acpi dev/acpica/Osd/OsdHardware.c optional acpi dev/acpica/Osd/OsdInterrupt.c optional acpi dev/acpica/Osd/OsdMemory.c optional acpi dev/acpica/Osd/OsdSchedule.c optional acpi dev/acpica/Osd/OsdStream.c optional acpi dev/acpica/Osd/OsdSynch.c optional acpi dev/acpica/Osd/OsdTable.c optional acpi dev/acpica/acpi.c optional acpi dev/acpica/acpi_acad.c optional acpi dev/acpica/acpi_battery.c optional acpi dev/acpica/acpi_button.c optional acpi dev/acpica/acpi_cmbat.c optional acpi dev/acpica/acpi_cpu.c optional acpi dev/acpica/acpi_ec.c optional acpi dev/acpica/acpi_isab.c optional acpi isa dev/acpica/acpi_lid.c optional acpi dev/acpica/acpi_package.c optional acpi dev/acpica/acpi_perf.c optional acpi dev/acpica/acpi_powerres.c optional acpi dev/acpica/acpi_quirk.c optional acpi dev/acpica/acpi_resource.c optional acpi dev/acpica/acpi_container.c optional acpi dev/acpica/acpi_smbat.c optional acpi dev/acpica/acpi_thermal.c optional acpi dev/acpica/acpi_throttle.c optional acpi dev/acpica/acpi_video.c optional acpi_video acpi dev/acpica/acpi_dock.c optional acpi_dock acpi dev/adlink/adlink.c optional adlink dev/ae/if_ae.c optional ae pci dev/age/if_age.c optional age pci dev/agp/agp.c optional agp pci dev/agp/agp_if.m optional agp pci dev/ahci/ahci.c optional ahci dev/ahci/ahciem.c optional ahci dev/ahci/ahci_pci.c optional ahci pci dev/aic7xxx/ahc_isa.c optional ahc isa dev/aic7xxx/ahc_pci.c optional ahc pci \ compile-with "${NORMAL_C} ${NO_WCONSTANT_CONVERSION}" dev/aic7xxx/ahd_pci.c optional ahd pci \ compile-with "${NORMAL_C} ${NO_WCONSTANT_CONVERSION}" dev/aic7xxx/aic7770.c optional ahc dev/aic7xxx/aic79xx.c optional ahd pci dev/aic7xxx/aic79xx_osm.c optional ahd pci dev/aic7xxx/aic79xx_pci.c optional ahd pci dev/aic7xxx/aic79xx_reg_print.c optional ahd pci ahd_reg_pretty_print dev/aic7xxx/aic7xxx.c optional ahc dev/aic7xxx/aic7xxx_93cx6.c optional ahc dev/aic7xxx/aic7xxx_osm.c optional ahc dev/aic7xxx/aic7xxx_pci.c optional ahc pci dev/aic7xxx/aic7xxx_reg_print.c optional ahc ahc_reg_pretty_print dev/al_eth/al_eth.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" dev/al_eth/al_init_eth_lm.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" dev/al_eth/al_init_eth_kr.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_iofic.c optional al_iofic \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_serdes_25g.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_serdes_hssp.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_config.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_debug.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_iofic.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_main.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_serdes.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/eth/al_hal_eth_kr.c optional al_eth \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/eth/al_hal_eth_main.c optional al_eth \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" dev/alc/if_alc.c optional alc pci dev/ale/if_ale.c optional ale pci dev/alpm/alpm.c optional alpm pci dev/altera/avgen/altera_avgen.c optional altera_avgen dev/altera/avgen/altera_avgen_fdt.c optional altera_avgen fdt dev/altera/avgen/altera_avgen_nexus.c optional altera_avgen dev/altera/msgdma/msgdma.c optional altera_msgdma xdma dev/altera/sdcard/altera_sdcard.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_disk.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_io.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_fdt.c optional altera_sdcard fdt dev/altera/sdcard/altera_sdcard_nexus.c optional altera_sdcard dev/altera/softdma/softdma.c optional altera_softdma xdma fdt dev/altera/pio/pio.c optional altera_pio dev/altera/pio/pio_if.m optional altera_pio dev/amdpm/amdpm.c optional amdpm pci | nfpm pci dev/amdsmb/amdsmb.c optional amdsmb pci dev/amr/amr.c optional amr dev/amr/amr_cam.c optional amrp amr dev/amr/amr_disk.c optional amr dev/amr/amr_linux.c optional amr compat_linux dev/amr/amr_pci.c optional amr pci dev/an/if_an.c optional an dev/an/if_an_isa.c optional an isa dev/an/if_an_pccard.c optional an pccard dev/an/if_an_pci.c optional an pci # dev/ata/ata_if.m optional ata | atacore dev/ata/ata-all.c optional ata | atacore dev/ata/ata-dma.c optional ata | atacore dev/ata/ata-lowlevel.c optional ata | atacore dev/ata/ata-sata.c optional ata | atacore dev/ata/ata-card.c optional ata pccard | atapccard dev/ata/ata-isa.c optional ata isa | ataisa dev/ata/ata-pci.c optional ata pci | atapci dev/ata/chipsets/ata-acard.c optional ata pci | ataacard dev/ata/chipsets/ata-acerlabs.c optional ata pci | ataacerlabs dev/ata/chipsets/ata-amd.c optional ata pci | ataamd dev/ata/chipsets/ata-ati.c optional ata pci | ataati dev/ata/chipsets/ata-cenatek.c optional ata pci | atacenatek dev/ata/chipsets/ata-cypress.c optional ata pci | atacypress dev/ata/chipsets/ata-cyrix.c optional ata pci | atacyrix dev/ata/chipsets/ata-highpoint.c optional ata pci | atahighpoint dev/ata/chipsets/ata-intel.c optional ata pci | ataintel dev/ata/chipsets/ata-ite.c optional ata pci | ataite dev/ata/chipsets/ata-jmicron.c optional ata pci | atajmicron dev/ata/chipsets/ata-marvell.c optional ata pci | atamarvell dev/ata/chipsets/ata-micron.c optional ata pci | atamicron dev/ata/chipsets/ata-national.c optional ata pci | atanational dev/ata/chipsets/ata-netcell.c optional ata pci | atanetcell dev/ata/chipsets/ata-nvidia.c optional ata pci | atanvidia dev/ata/chipsets/ata-promise.c optional ata pci | atapromise dev/ata/chipsets/ata-serverworks.c optional ata pci | ataserverworks dev/ata/chipsets/ata-siliconimage.c optional ata pci | atasiliconimage | ataati dev/ata/chipsets/ata-sis.c optional ata pci | atasis dev/ata/chipsets/ata-via.c optional ata pci | atavia # dev/ath/if_ath_pci.c optional ath_pci pci \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/if_ath_ahb.c optional ath_ahb \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/if_ath.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_alq.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_beacon.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_btcoex.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_btcoex_mci.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_debug.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_descdma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_keycache.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_ioctl.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_led.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_lna_div.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx_edma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx_ht.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tdma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_sysctl.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_rx.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_rx_edma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_spectral.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ah_osdep.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/ath_hal/ah.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v1.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v3.c optional ath_hal | ath_ar5211 | ath_ar5212 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v14.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v4k.c \ optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_9287.c \ optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_regdomain.c optional ath \ compile-with "${NORMAL_C} ${NO_WSHIFT_COUNT_NEGATIVE} ${NO_WSHIFT_COUNT_OVERFLOW} -I$S/dev/ath" # ar5210 dev/ath/ath_hal/ar5210/ar5210_attach.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_beacon.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_interrupts.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_keycache.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_misc.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_phy.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_power.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_recv.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_reset.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_xmit.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5211 dev/ath/ath_hal/ar5211/ar5211_attach.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_beacon.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_interrupts.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_keycache.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_misc.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_phy.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_power.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_recv.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_reset.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_xmit.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5212 dev/ath/ath_hal/ar5212/ar5212_ani.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_attach.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_beacon.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_eeprom.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_gpio.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_interrupts.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_keycache.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_misc.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_phy.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_power.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_recv.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_reset.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_rfgain.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_xmit.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5416 (depends on ar5212) dev/ath/ath_hal/ar5416/ar5416_ani.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_attach.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_beacon.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_btcoex.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_iq.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_adcgain.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_adcdc.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_eeprom.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_gpio.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_interrupts.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_keycache.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_misc.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_phy.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_power.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_radar.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_recv.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_reset.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_spectral.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_xmit.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9130 (depends upon ar5416) - also requires AH_SUPPORT_AR9130 # # Since this is an embedded MAC SoC, there's no need to compile it into the # default HAL. dev/ath/ath_hal/ar9001/ar9130_attach.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9001/ar9130_phy.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9001/ar9130_eeprom.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9160 (depends on ar5416) dev/ath/ath_hal/ar9001/ar9160_attach.c optional ath_hal | ath_ar9160 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9280 (depends on ar5416) dev/ath/ath_hal/ar9002/ar9280_attach.c optional ath_hal | ath_ar9280 | \ ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9280_olc.c optional ath_hal | ath_ar9280 | \ ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9285 (depends on ar5416 and ar9280) dev/ath/ath_hal/ar9002/ar9285_attach.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_btcoex.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_reset.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_cal.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_phy.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_diversity.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9287 (depends on ar5416) dev/ath/ath_hal/ar9002/ar9287_attach.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_reset.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_cal.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_olc.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9300 contrib/dev/ath/ath_hal/ar9300/ar9300_ani.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_attach.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_beacon.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_eeprom.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal ${NO_WCONSTANT_CONVERSION}" contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_gpio.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_interrupts.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_keycache.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_mci.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_misc.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_paprd.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_phy.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_power.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_radar.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_radio.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_recv.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_recv_ds.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_reset.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal ${NO_WSOMETIMES_UNINITIALIZED} -Wno-unused-function" contrib/dev/ath/ath_hal/ar9300/ar9300_stub.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_stub_funcs.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_spectral.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_timer.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_xmit.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_xmit_ds.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" # rf backends dev/ath/ath_hal/ar5212/ar2316.c optional ath_rf2316 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2317.c optional ath_rf2317 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2413.c optional ath_hal | ath_rf2413 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2425.c optional ath_hal | ath_rf2425 | ath_rf2417 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5111.c optional ath_hal | ath_rf5111 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5112.c optional ath_hal | ath_rf5112 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5413.c optional ath_hal | ath_rf5413 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar2133.c optional ath_hal | ath_ar5416 | \ ath_ar9130 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9280.c optional ath_hal | ath_ar9280 | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ath rate control algorithms dev/ath/ath_rate/amrr/amrr.c optional ath_rate_amrr \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/onoe/onoe.c optional ath_rate_onoe \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/sample/sample.c optional ath_rate_sample \ compile-with "${NORMAL_C} -I$S/dev/ath" # ath DFS modules dev/ath/ath_dfs/null/dfs_null.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/bce/if_bce.c optional bce dev/bfe/if_bfe.c optional bfe dev/bge/if_bge.c optional bge dev/bhnd/bhnd.c optional bhnd dev/bhnd/bhnd_erom.c optional bhnd dev/bhnd/bhnd_erom_if.m optional bhnd dev/bhnd/bhnd_subr.c optional bhnd dev/bhnd/bhnd_bus_if.m optional bhnd dev/bhnd/bhndb/bhnd_bhndb.c optional bhndb bhnd dev/bhnd/bhndb/bhndb.c optional bhndb bhnd dev/bhnd/bhndb/bhndb_bus_if.m optional bhndb bhnd dev/bhnd/bhndb/bhndb_hwdata.c optional bhndb bhnd dev/bhnd/bhndb/bhndb_if.m optional bhndb bhnd dev/bhnd/bhndb/bhndb_pci.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_pci_hwdata.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_pci_sprom.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_subr.c optional bhndb bhnd dev/bhnd/bcma/bcma.c optional bcma bhnd dev/bhnd/bcma/bcma_bhndb.c optional bcma bhnd bhndb dev/bhnd/bcma/bcma_erom.c optional bcma bhnd dev/bhnd/bcma/bcma_subr.c optional bcma bhnd dev/bhnd/cores/chipc/bhnd_chipc_if.m optional bhnd dev/bhnd/cores/chipc/bhnd_sprom_chipc.c optional bhnd dev/bhnd/cores/chipc/bhnd_pmu_chipc.c optional bhnd dev/bhnd/cores/chipc/chipc.c optional bhnd dev/bhnd/cores/chipc/chipc_cfi.c optional bhnd cfi dev/bhnd/cores/chipc/chipc_gpio.c optional bhnd gpio dev/bhnd/cores/chipc/chipc_slicer.c optional bhnd cfi | bhnd spibus dev/bhnd/cores/chipc/chipc_spi.c optional bhnd spibus dev/bhnd/cores/chipc/chipc_subr.c optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl.c optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_if.m optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_hostb_if.m optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_subr.c optional bhnd dev/bhnd/cores/pci/bhnd_pci.c optional bhnd pci dev/bhnd/cores/pci/bhnd_pci_hostb.c optional bhndb bhnd pci dev/bhnd/cores/pci/bhnd_pcib.c optional bhnd_pcib bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2.c optional bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2_hostb.c optional bhndb bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2b.c optional bhnd_pcie2b bhnd pci dev/bhnd/cores/pmu/bhnd_pmu.c optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_core.c optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_if.m optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_bcm.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_bcmraw.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_btxt.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_sprom.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_sprom_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_tlv.c optional bhnd dev/bhnd/nvram/bhnd_nvram_if.m optional bhnd dev/bhnd/nvram/bhnd_nvram_io.c optional bhnd dev/bhnd/nvram/bhnd_nvram_iobuf.c optional bhnd dev/bhnd/nvram/bhnd_nvram_ioptr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_iores.c optional bhnd dev/bhnd/nvram/bhnd_nvram_plist.c optional bhnd dev/bhnd/nvram/bhnd_nvram_store.c optional bhnd dev/bhnd/nvram/bhnd_nvram_store_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_fmts.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_prf.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_subr.c optional bhnd dev/bhnd/nvram/bhnd_sprom.c optional bhnd dev/bhnd/siba/siba.c optional siba bhnd dev/bhnd/siba/siba_bhndb.c optional siba bhnd bhndb dev/bhnd/siba/siba_erom.c optional siba bhnd dev/bhnd/siba/siba_subr.c optional siba bhnd # dev/bktr/bktr_audio.c optional bktr pci dev/bktr/bktr_card.c optional bktr pci dev/bktr/bktr_core.c optional bktr pci dev/bktr/bktr_i2c.c optional bktr pci smbus dev/bktr/bktr_os.c optional bktr pci dev/bktr/bktr_tuner.c optional bktr pci dev/bktr/msp34xx.c optional bktr pci dev/bnxt/bnxt_hwrm.c optional bnxt iflib pci dev/bnxt/bnxt_sysctl.c optional bnxt iflib pci dev/bnxt/bnxt_txrx.c optional bnxt iflib pci dev/bnxt/if_bnxt.c optional bnxt iflib pci dev/bwi/bwimac.c optional bwi dev/bwi/bwiphy.c optional bwi dev/bwi/bwirf.c optional bwi dev/bwi/if_bwi.c optional bwi dev/bwi/if_bwi_pci.c optional bwi pci dev/bwn/if_bwn.c optional bwn bhnd dev/bwn/if_bwn_pci.c optional bwn pci bhnd bhndb bhndb_pci dev/bwn/if_bwn_phy_common.c optional bwn bhnd dev/bwn/if_bwn_phy_g.c optional bwn bhnd dev/bwn/if_bwn_phy_lp.c optional bwn bhnd dev/bwn/if_bwn_phy_n.c optional bwn bhnd dev/bwn/if_bwn_util.c optional bwn bhnd dev/cardbus/cardbus.c optional cardbus dev/cardbus/cardbus_cis.c optional cardbus dev/cardbus/cardbus_device.c optional cardbus dev/cas/if_cas.c optional cas dev/cfi/cfi_bus_fdt.c optional cfi fdt dev/cfi/cfi_bus_nexus.c optional cfi dev/cfi/cfi_core.c optional cfi dev/cfi/cfi_dev.c optional cfi dev/cfi/cfi_disk.c optional cfid dev/chromebook_platform/chromebook_platform.c optional chromebook_platform dev/ciss/ciss.c optional ciss dev/cmx/cmx.c optional cmx dev/cmx/cmx_pccard.c optional cmx pccard dev/cpufreq/ichss.c optional cpufreq pci dev/cxgb/cxgb_main.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_sge.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_mc5.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_vsc7323.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_vsc8211.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_ael1002.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_aq100x.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_mv88e1xxx.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_xgmac.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_t3_hw.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_tn1010.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/sys/uipc_mvec.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_t3fw.c optional cxgb cxgb_t3fw \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgbe/t4_clip.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_filter.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_if.m optional cxgbe pci dev/cxgbe/t4_iov.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_mp_ring.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_main.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_netmap.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_sched.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_sge.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_smt.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_l2t.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_tracer.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_vf.c optional cxgbev pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/common/t4_hw.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/common/t4vf_hw.c optional cxgbev pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_common.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_flash_utils.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_lib.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_wtp.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/fastlz.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/fastlz_api.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" t4fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t4fw_cfg.fw:t4fw_cfg t4fw_cfg_uwire.fw:t4fw_cfg_uwire t4fw.fw:t4fw -mt4fw_cfg -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "t4fw_cfg.c" t4fw_cfg.fwo optional cxgbe \ dependency "t4fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw_cfg.fwo" t4fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t4fw_cfg.fw" t4fw_cfg_uwire.fwo optional cxgbe \ dependency "t4fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw_cfg_uwire.fwo" t4fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t4fw_cfg_uwire.fw" t4fw.fwo optional cxgbe \ dependency "t4fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw.fwo" t4fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw-1.23.0.0.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "t4fw.fw" t5fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t5fw_cfg.fw:t5fw_cfg t5fw_cfg_uwire.fw:t5fw_cfg_uwire t5fw.fw:t5fw -mt5fw_cfg -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "t5fw_cfg.c" t5fw_cfg.fwo optional cxgbe \ dependency "t5fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw_cfg.fwo" t5fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t5fw_cfg.fw" t5fw_cfg_uwire.fwo optional cxgbe \ dependency "t5fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw_cfg_uwire.fwo" t5fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t5fw_cfg_uwire.fw" t5fw.fwo optional cxgbe \ dependency "t5fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw.fwo" t5fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw-1.23.0.0.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "t5fw.fw" t6fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t6fw_cfg.fw:t6fw_cfg t6fw_cfg_uwire.fw:t6fw_cfg_uwire t6fw.fw:t6fw -mt6fw_cfg -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "t6fw_cfg.c" t6fw_cfg.fwo optional cxgbe \ dependency "t6fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw_cfg.fwo" t6fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t6fw_cfg.fw" t6fw_cfg_uwire.fwo optional cxgbe \ dependency "t6fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw_cfg_uwire.fwo" t6fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t6fw_cfg_uwire.fw" t6fw.fwo optional cxgbe \ dependency "t6fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw.fwo" t6fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw-1.23.0.0.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "t6fw.fw" dev/cxgbe/crypto/t4_crypto.c optional ccr \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cy/cy.c optional cy dev/cy/cy_isa.c optional cy isa dev/cy/cy_pci.c optional cy pci dev/cyapa/cyapa.c optional cyapa iicbus dev/dc/if_dc.c optional dc pci dev/dc/dcphy.c optional dc pci dev/dc/pnphy.c optional dc pci dev/dcons/dcons.c optional dcons dev/dcons/dcons_crom.c optional dcons_crom dev/dcons/dcons_os.c optional dcons dev/dme/if_dme.c optional dme dev/drm2/drm_agpsupport.c optional drm2 dev/drm2/drm_auth.c optional drm2 dev/drm2/drm_bufs.c optional drm2 dev/drm2/drm_buffer.c optional drm2 dev/drm2/drm_context.c optional drm2 dev/drm2/drm_crtc.c optional drm2 dev/drm2/drm_crtc_helper.c optional drm2 dev/drm2/drm_dma.c optional drm2 dev/drm2/drm_dp_helper.c optional drm2 dev/drm2/drm_dp_iic_helper.c optional drm2 dev/drm2/drm_drv.c optional drm2 dev/drm2/drm_edid.c optional drm2 dev/drm2/drm_fb_helper.c optional drm2 dev/drm2/drm_fops.c optional drm2 dev/drm2/drm_gem.c optional drm2 dev/drm2/drm_gem_names.c optional drm2 dev/drm2/drm_global.c optional drm2 dev/drm2/drm_hashtab.c optional drm2 dev/drm2/drm_ioctl.c optional drm2 dev/drm2/drm_irq.c optional drm2 dev/drm2/drm_linux_list_sort.c optional drm2 dev/drm2/drm_lock.c optional drm2 dev/drm2/drm_memory.c optional drm2 dev/drm2/drm_mm.c optional drm2 dev/drm2/drm_modes.c optional drm2 dev/drm2/drm_pci.c optional drm2 dev/drm2/drm_platform.c optional drm2 dev/drm2/drm_scatter.c optional drm2 dev/drm2/drm_stub.c optional drm2 dev/drm2/drm_sysctl.c optional drm2 dev/drm2/drm_vm.c optional drm2 dev/drm2/drm_os_freebsd.c optional drm2 dev/drm2/ttm/ttm_agp_backend.c optional drm2 dev/drm2/ttm/ttm_lock.c optional drm2 dev/drm2/ttm/ttm_object.c optional drm2 dev/drm2/ttm/ttm_tt.c optional drm2 dev/drm2/ttm/ttm_bo_util.c optional drm2 dev/drm2/ttm/ttm_bo.c optional drm2 dev/drm2/ttm/ttm_bo_manager.c optional drm2 dev/drm2/ttm/ttm_execbuf_util.c optional drm2 dev/drm2/ttm/ttm_memory.c optional drm2 dev/drm2/ttm/ttm_page_alloc.c optional drm2 dev/drm2/ttm/ttm_bo_vm.c optional drm2 dev/efidev/efidev.c optional efirt dev/efidev/efirt.c optional efirt dev/efidev/efirtc.c optional efirt dev/e1000/if_em.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/em_txrx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/igb_txrx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_80003es2lan.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82540.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82541.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82542.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82543.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82571.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82575.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_ich8lan.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_i210.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_api.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_mac.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_manage.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_nvm.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_phy.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_vf.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_mbx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_osdep.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/et/if_et.c optional et dev/ena/ena.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" dev/ena/ena_sysctl.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" contrib/ena-com/ena_com.c optional ena contrib/ena-com/ena_eth_com.c optional ena dev/esp/esp_pci.c optional esp pci dev/esp/ncr53c9x.c optional esp dev/etherswitch/arswitch/arswitch.c optional arswitch dev/etherswitch/arswitch/arswitch_reg.c optional arswitch dev/etherswitch/arswitch/arswitch_phy.c optional arswitch dev/etherswitch/arswitch/arswitch_8216.c optional arswitch dev/etherswitch/arswitch/arswitch_8226.c optional arswitch dev/etherswitch/arswitch/arswitch_8316.c optional arswitch dev/etherswitch/arswitch/arswitch_8327.c optional arswitch dev/etherswitch/arswitch/arswitch_7240.c optional arswitch dev/etherswitch/arswitch/arswitch_9340.c optional arswitch dev/etherswitch/arswitch/arswitch_vlans.c optional arswitch dev/etherswitch/etherswitch.c optional etherswitch dev/etherswitch/etherswitch_if.m optional etherswitch dev/etherswitch/ip17x/ip17x.c optional ip17x dev/etherswitch/ip17x/ip175c.c optional ip17x dev/etherswitch/ip17x/ip175d.c optional ip17x dev/etherswitch/ip17x/ip17x_phy.c optional ip17x dev/etherswitch/ip17x/ip17x_vlans.c optional ip17x dev/etherswitch/miiproxy.c optional miiproxy dev/etherswitch/rtl8366/rtl8366rb.c optional rtl8366rb dev/etherswitch/e6000sw/e6000sw.c optional e6000sw dev/etherswitch/e6000sw/e6060sw.c optional e6060sw dev/etherswitch/infineon/adm6996fc.c optional adm6996fc dev/etherswitch/micrel/ksz8995ma.c optional ksz8995ma dev/etherswitch/ukswitch/ukswitch.c optional ukswitch dev/evdev/cdev.c optional evdev dev/evdev/evdev.c optional evdev dev/evdev/evdev_mt.c optional evdev dev/evdev/evdev_utils.c optional evdev dev/evdev/uinput.c optional evdev uinput dev/exca/exca.c optional cbb dev/extres/clk/clk.c optional ext_resources clk fdt dev/extres/clk/clkdev_if.m optional ext_resources clk fdt dev/extres/clk/clknode_if.m optional ext_resources clk fdt dev/extres/clk/clk_bus.c optional ext_resources clk fdt dev/extres/clk/clk_div.c optional ext_resources clk fdt dev/extres/clk/clk_fixed.c optional ext_resources clk fdt dev/extres/clk/clk_gate.c optional ext_resources clk fdt dev/extres/clk/clk_mux.c optional ext_resources clk fdt dev/extres/phy/phy.c optional ext_resources phy fdt dev/extres/phy/phydev_if.m optional ext_resources phy fdt dev/extres/phy/phynode_if.m optional ext_resources phy fdt dev/extres/phy/phy_usb.c optional ext_resources phy fdt dev/extres/phy/phynode_usb_if.m optional ext_resources phy fdt dev/extres/hwreset/hwreset.c optional ext_resources hwreset fdt dev/extres/hwreset/hwreset_if.m optional ext_resources hwreset fdt dev/extres/nvmem/nvmem.c optional ext_resources nvmem fdt dev/extres/nvmem/nvmem_if.m optional ext_resources nvmem fdt dev/extres/regulator/regdev_if.m optional ext_resources regulator fdt dev/extres/regulator/regnode_if.m optional ext_resources regulator fdt dev/extres/regulator/regulator.c optional ext_resources regulator fdt dev/extres/regulator/regulator_bus.c optional ext_resources regulator fdt dev/extres/regulator/regulator_fixed.c optional ext_resources regulator fdt dev/extres/syscon/syscon.c optional ext_resources syscon dev/extres/syscon/syscon_generic.c optional ext_resources syscon fdt dev/extres/syscon/syscon_if.m optional ext_resources syscon dev/fb/fbd.c optional fbd | vt dev/fb/fb_if.m standard dev/fb/splash.c optional sc splash dev/fdt/fdt_clock.c optional fdt fdt_clock dev/fdt/fdt_clock_if.m optional fdt fdt_clock dev/fdt/fdt_common.c optional fdt dev/fdt/fdt_pinctrl.c optional fdt fdt_pinctrl dev/fdt/fdt_pinctrl_if.m optional fdt fdt_pinctrl dev/fdt/fdt_slicer.c optional fdt cfi | fdt mx25l | fdt n25q | fdt at45d dev/fdt/fdt_static_dtb.S optional fdt fdt_dtb_static \ dependency "${FDT_DTS_FILE:T:R}.dtb" dev/fdt/simplebus.c optional fdt dev/fdt/simple_mfd.c optional syscon fdt dev/filemon/filemon.c optional filemon dev/firewire/firewire.c optional firewire dev/firewire/fwcrom.c optional firewire dev/firewire/fwdev.c optional firewire dev/firewire/fwdma.c optional firewire dev/firewire/fwmem.c optional firewire dev/firewire/fwohci.c optional firewire dev/firewire/fwohci_pci.c optional firewire pci dev/firewire/if_fwe.c optional fwe dev/firewire/if_fwip.c optional fwip dev/firewire/sbp.c optional sbp dev/firewire/sbp_targ.c optional sbp_targ dev/flash/at45d.c optional at45d dev/flash/cqspi.c optional cqspi fdt xdma dev/flash/mx25l.c optional mx25l dev/flash/n25q.c optional n25q fdt dev/flash/qspi_if.m optional cqspi fdt | n25q fdt dev/fxp/if_fxp.c optional fxp dev/fxp/inphy.c optional fxp dev/gem/if_gem.c optional gem dev/gem/if_gem_pci.c optional gem pci dev/gem/if_gem_sbus.c optional gem sbus dev/gpio/gpiobacklight.c optional gpiobacklight fdt dev/gpio/gpiokeys.c optional gpiokeys fdt dev/gpio/gpiokeys_codes.c optional gpiokeys fdt dev/gpio/gpiobus.c optional gpio \ dependency "gpiobus_if.h" dev/gpio/gpioc.c optional gpio \ dependency "gpio_if.h" dev/gpio/gpioiic.c optional gpioiic dev/gpio/gpioled.c optional gpioled !fdt dev/gpio/gpioled_fdt.c optional gpioled fdt dev/gpio/gpiopower.c optional gpiopower fdt dev/gpio/gpioregulator.c optional gpioregulator fdt ext_resources dev/gpio/gpiospi.c optional gpiospi dev/gpio/gpioths.c optional gpioths dev/gpio/gpio_if.m optional gpio dev/gpio/gpiobus_if.m optional gpio dev/gpio/gpiopps.c optional gpiopps fdt dev/gpio/ofw_gpiobus.c optional fdt gpio dev/hifn/hifn7751.c optional hifn dev/hme/if_hme.c optional hme dev/hme/if_hme_pci.c optional hme pci dev/hme/if_hme_sbus.c optional hme sbus dev/hptiop/hptiop.c optional hptiop scbus dev/hwpmc/hwpmc_logging.c optional hwpmc dev/hwpmc/hwpmc_mod.c optional hwpmc dev/hwpmc/hwpmc_soft.c optional hwpmc dev/ichiic/ig4_acpi.c optional ig4 acpi iicbus dev/ichiic/ig4_iic.c optional ig4 iicbus dev/ichiic/ig4_pci.c optional ig4 pci iicbus dev/ichsmb/ichsmb.c optional ichsmb dev/ichsmb/ichsmb_pci.c optional ichsmb pci dev/ida/ida.c optional ida dev/ida/ida_disk.c optional ida dev/ida/ida_pci.c optional ida pci dev/iicbus/ad7418.c optional ad7418 dev/iicbus/ds1307.c optional ds1307 dev/iicbus/ds13rtc.c optional ds13rtc | ds133x | ds1374 dev/iicbus/ds1672.c optional ds1672 dev/iicbus/ds3231.c optional ds3231 dev/iicbus/rtc8583.c optional rtc8583 dev/iicbus/syr827.c optional syr827 ext_resources fdt dev/iicbus/icee.c optional icee dev/iicbus/if_ic.c optional ic dev/iicbus/iic.c optional iic dev/iicbus/iic_recover_bus.c optional iicbus dev/iicbus/iicbb.c optional iicbb dev/iicbus/iicbb_if.m optional iicbb dev/iicbus/iicbus.c optional iicbus dev/iicbus/iicbus_if.m optional iicbus dev/iicbus/iiconf.c optional iicbus dev/iicbus/iicsmb.c optional iicsmb \ dependency "iicbus_if.h" dev/iicbus/iicoc.c optional iicoc dev/iicbus/isl12xx.c optional isl12xx dev/iicbus/lm75.c optional lm75 dev/iicbus/nxprtc.c optional nxprtc | pcf8563 dev/iicbus/ofw_iicbus.c optional fdt iicbus dev/iicbus/rtc8583.c optional rtc8583 dev/iicbus/s35390a.c optional s35390a dev/iicbus/sy8106a.c optional sy8106a ext_resources fdt dev/iir/iir.c optional iir dev/iir/iir_ctrl.c optional iir dev/iir/iir_pci.c optional iir pci dev/intpm/intpm.c optional intpm pci # XXX Work around clang warning, until maintainer approves fix. dev/ips/ips.c optional ips \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/ips/ips_commands.c optional ips dev/ips/ips_disk.c optional ips dev/ips/ips_ioctl.c optional ips dev/ips/ips_pci.c optional ips pci dev/ipw/if_ipw.c optional ipw ipwbssfw.c optional ipwbssfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_bss.fw:ipw_bss:130 -lintel_ipw -mipw_bss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwbssfw.c" ipw_bss.fwo optional ipwbssfw | ipwfw \ dependency "ipw_bss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_bss.fwo" ipw_bss.fw optional ipwbssfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_bss.fw" ipwibssfw.c optional ipwibssfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_ibss.fw:ipw_ibss:130 -lintel_ipw -mipw_ibss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwibssfw.c" ipw_ibss.fwo optional ipwibssfw | ipwfw \ dependency "ipw_ibss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_ibss.fwo" ipw_ibss.fw optional ipwibssfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3-i.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_ibss.fw" ipwmonitorfw.c optional ipwmonitorfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_monitor.fw:ipw_monitor:130 -lintel_ipw -mipw_monitor -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwmonitorfw.c" ipw_monitor.fwo optional ipwmonitorfw | ipwfw \ dependency "ipw_monitor.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_monitor.fwo" ipw_monitor.fw optional ipwmonitorfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3-p.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_monitor.fw" dev/iscsi/icl.c optional iscsi dev/iscsi/icl_conn_if.m optional cfiscsi | iscsi dev/iscsi/icl_soft.c optional iscsi dev/iscsi/icl_soft_proxy.c optional iscsi dev/iscsi/iscsi.c optional iscsi scbus dev/iscsi_initiator/iscsi.c optional iscsi_initiator scbus dev/iscsi_initiator/iscsi_subr.c optional iscsi_initiator scbus dev/iscsi_initiator/isc_cam.c optional iscsi_initiator scbus dev/iscsi_initiator/isc_soc.c optional iscsi_initiator scbus dev/iscsi_initiator/isc_sm.c optional iscsi_initiator scbus dev/iscsi_initiator/isc_subr.c optional iscsi_initiator scbus dev/ismt/ismt.c optional ismt dev/isl/isl.c optional isl iicbus dev/isp/isp.c optional isp dev/isp/isp_freebsd.c optional isp dev/isp/isp_library.c optional isp dev/isp/isp_pci.c optional isp pci dev/isp/isp_sbus.c optional isp sbus dev/isp/isp_target.c optional isp dev/ispfw/ispfw.c optional ispfw dev/iwi/if_iwi.c optional iwi iwibssfw.c optional iwibssfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_bss.fw:iwi_bss:300 -lintel_iwi -miwi_bss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwibssfw.c" iwi_bss.fwo optional iwibssfw | iwifw \ dependency "iwi_bss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_bss.fwo" iwi_bss.fw optional iwibssfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-bss.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_bss.fw" iwiibssfw.c optional iwiibssfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_ibss.fw:iwi_ibss:300 -lintel_iwi -miwi_ibss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwiibssfw.c" iwi_ibss.fwo optional iwiibssfw | iwifw \ dependency "iwi_ibss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_ibss.fwo" iwi_ibss.fw optional iwiibssfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-ibss.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_ibss.fw" iwimonitorfw.c optional iwimonitorfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_monitor.fw:iwi_monitor:300 -lintel_iwi -miwi_monitor -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwimonitorfw.c" iwi_monitor.fwo optional iwimonitorfw | iwifw \ dependency "iwi_monitor.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_monitor.fwo" iwi_monitor.fw optional iwimonitorfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-sniffer.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_monitor.fw" dev/iwm/if_iwm.c optional iwm dev/iwm/if_iwm_7000.c optional iwm dev/iwm/if_iwm_8000.c optional iwm dev/iwm/if_iwm_binding.c optional iwm dev/iwm/if_iwm_fw.c optional iwm dev/iwm/if_iwm_led.c optional iwm dev/iwm/if_iwm_mac_ctxt.c optional iwm dev/iwm/if_iwm_notif_wait.c optional iwm dev/iwm/if_iwm_pcie_trans.c optional iwm dev/iwm/if_iwm_phy_ctxt.c optional iwm dev/iwm/if_iwm_phy_db.c optional iwm dev/iwm/if_iwm_power.c optional iwm dev/iwm/if_iwm_scan.c optional iwm dev/iwm/if_iwm_sf.c optional iwm dev/iwm/if_iwm_sta.c optional iwm dev/iwm/if_iwm_time_event.c optional iwm dev/iwm/if_iwm_util.c optional iwm iwm3160fw.c optional iwm3160fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm3160.fw:iwm3160fw -miwm3160fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm3160fw.c" iwm3160fw.fwo optional iwm3160fw | iwmfw \ dependency "iwm3160.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm3160fw.fwo" iwm3160.fw optional iwm3160fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-3160-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm3160.fw" iwm3168fw.c optional iwm3168fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm3168.fw:iwm3168fw -miwm3168fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm3168fw.c" iwm3168fw.fwo optional iwm3168fw | iwmfw \ dependency "iwm3168.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm3168fw.fwo" iwm3168.fw optional iwm3168fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-3168-22.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm3168.fw" iwm7260fw.c optional iwm7260fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7260.fw:iwm7260fw -miwm7260fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm7260fw.c" iwm7260fw.fwo optional iwm7260fw | iwmfw \ dependency "iwm7260.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7260fw.fwo" iwm7260.fw optional iwm7260fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7260-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7260.fw" iwm7265fw.c optional iwm7265fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7265.fw:iwm7265fw -miwm7265fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm7265fw.c" iwm7265fw.fwo optional iwm7265fw | iwmfw \ dependency "iwm7265.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7265fw.fwo" iwm7265.fw optional iwm7265fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7265-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7265.fw" iwm7265Dfw.c optional iwm7265Dfw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7265D.fw:iwm7265Dfw -miwm7265Dfw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm7265Dfw.c" iwm7265Dfw.fwo optional iwm7265Dfw | iwmfw \ dependency "iwm7265D.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7265Dfw.fwo" iwm7265D.fw optional iwm7265Dfw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7265D-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7265D.fw" iwm8000Cfw.c optional iwm8000Cfw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm8000C.fw:iwm8000Cfw -miwm8000Cfw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm8000Cfw.c" iwm8000Cfw.fwo optional iwm8000Cfw | iwmfw \ dependency "iwm8000C.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm8000Cfw.fwo" iwm8000C.fw optional iwm8000Cfw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-8000C-16.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm8000C.fw" iwm8265.fw optional iwm8265fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-8265-22.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm8265.fw" iwm8265fw.c optional iwm8265fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm8265.fw:iwm8265fw -miwm8265fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm8265fw.c" iwm8265fw.fwo optional iwm8265fw | iwmfw \ dependency "iwm8265.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm8265fw.fwo" dev/iwn/if_iwn.c optional iwn iwn1000fw.c optional iwn1000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn1000.fw:iwn1000fw -miwn1000fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn1000fw.c" iwn1000fw.fwo optional iwn1000fw | iwnfw \ dependency "iwn1000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn1000fw.fwo" iwn1000.fw optional iwn1000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-1000-39.31.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn1000.fw" iwn100fw.c optional iwn100fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn100.fw:iwn100fw -miwn100fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn100fw.c" iwn100fw.fwo optional iwn100fw | iwnfw \ dependency "iwn100.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn100fw.fwo" iwn100.fw optional iwn100fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-100-39.31.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn100.fw" iwn105fw.c optional iwn105fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn105.fw:iwn105fw -miwn105fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn105fw.c" iwn105fw.fwo optional iwn105fw | iwnfw \ dependency "iwn105.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn105fw.fwo" iwn105.fw optional iwn105fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-105-6-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn105.fw" iwn135fw.c optional iwn135fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn135.fw:iwn135fw -miwn135fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn135fw.c" iwn135fw.fwo optional iwn135fw | iwnfw \ dependency "iwn135.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn135fw.fwo" iwn135.fw optional iwn135fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-135-6-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn135.fw" iwn2000fw.c optional iwn2000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn2000.fw:iwn2000fw -miwn2000fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn2000fw.c" iwn2000fw.fwo optional iwn2000fw | iwnfw \ dependency "iwn2000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn2000fw.fwo" iwn2000.fw optional iwn2000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-2000-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn2000.fw" iwn2030fw.c optional iwn2030fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn2030.fw:iwn2030fw -miwn2030fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn2030fw.c" iwn2030fw.fwo optional iwn2030fw | iwnfw \ dependency "iwn2030.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn2030fw.fwo" iwn2030.fw optional iwn2030fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwnwifi-2030-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn2030.fw" iwn4965fw.c optional iwn4965fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn4965.fw:iwn4965fw -miwn4965fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn4965fw.c" iwn4965fw.fwo optional iwn4965fw | iwnfw \ dependency "iwn4965.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn4965fw.fwo" iwn4965.fw optional iwn4965fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-4965-228.61.2.24.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn4965.fw" iwn5000fw.c optional iwn5000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn5000.fw:iwn5000fw -miwn5000fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn5000fw.c" iwn5000fw.fwo optional iwn5000fw | iwnfw \ dependency "iwn5000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn5000fw.fwo" iwn5000.fw optional iwn5000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-5000-8.83.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn5000.fw" iwn5150fw.c optional iwn5150fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn5150.fw:iwn5150fw -miwn5150fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn5150fw.c" iwn5150fw.fwo optional iwn5150fw | iwnfw \ dependency "iwn5150.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn5150fw.fwo" iwn5150.fw optional iwn5150fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-5150-8.24.2.2.fw.uu"\ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn5150.fw" iwn6000fw.c optional iwn6000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000.fw:iwn6000fw -miwn6000fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn6000fw.c" iwn6000fw.fwo optional iwn6000fw | iwnfw \ dependency "iwn6000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000fw.fwo" iwn6000.fw optional iwn6000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000-9.221.4.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000.fw" iwn6000g2afw.c optional iwn6000g2afw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000g2a.fw:iwn6000g2afw -miwn6000g2afw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn6000g2afw.c" iwn6000g2afw.fwo optional iwn6000g2afw | iwnfw \ dependency "iwn6000g2a.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000g2afw.fwo" iwn6000g2a.fw optional iwn6000g2afw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000g2a-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000g2a.fw" iwn6000g2bfw.c optional iwn6000g2bfw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000g2b.fw:iwn6000g2bfw -miwn6000g2bfw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn6000g2bfw.c" iwn6000g2bfw.fwo optional iwn6000g2bfw | iwnfw \ dependency "iwn6000g2b.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000g2bfw.fwo" iwn6000g2b.fw optional iwn6000g2bfw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000g2b-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000g2b.fw" iwn6050fw.c optional iwn6050fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6050.fw:iwn6050fw -miwn6050fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn6050fw.c" iwn6050fw.fwo optional iwn6050fw | iwnfw \ dependency "iwn6050.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6050fw.fwo" iwn6050.fw optional iwn6050fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6050-41.28.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6050.fw" dev/ixgbe/if_ix.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe -DSMP" dev/ixgbe/if_ixv.c optional ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe -DSMP" dev/ixgbe/if_bypass.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/if_fdir.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/if_sriov.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ix_txrx.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_osdep.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_phy.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_api.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_common.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_mbx.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_vf.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_82598.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_82599.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_x540.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_x550.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb_82598.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb_82599.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/jedec_dimm/jedec_dimm.c optional jedec_dimm smbus dev/jme/if_jme.c optional jme pci dev/kbd/kbd.c optional atkbd | pckbd | sc | ukbd | vt dev/kbdmux/kbdmux.c optional kbdmux dev/ksyms/ksyms.c optional ksyms dev/le/am7990.c optional le dev/le/am79900.c optional le dev/le/if_le_pci.c optional le pci dev/le/lance.c optional le dev/led/led.c standard dev/lge/if_lge.c optional lge dev/liquidio/base/cn23xx_pf_device.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_console.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_ctrl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_device.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_droq.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_mem_ops.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_request_manager.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_response_manager.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_core.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_ioctl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_main.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_rss.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_rxtx.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_sysctl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" lio.c optional lio \ compile-with "${AWK} -f $S/tools/fw_stub.awk lio_23xx_nic.bin.fw:lio_23xx_nic.bin -mlio_23xx_nic.bin -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "lio.c" lio_23xx_nic.bin.fw.fwo optional lio \ dependency "lio_23xx_nic.bin.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "lio_23xx_nic.bin.fw.fwo" lio_23xx_nic.bin.fw optional lio \ dependency "$S/contrib/dev/liquidio/lio_23xx_nic.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "lio_23xx_nic.bin.fw" dev/malo/if_malo.c optional malo dev/malo/if_malohal.c optional malo dev/malo/if_malo_pci.c optional malo pci dev/mc146818/mc146818.c optional mc146818 dev/md/md.c optional md dev/mdio/mdio_if.m optional miiproxy | mdio dev/mdio/mdio.c optional miiproxy | mdio dev/mem/memdev.c optional mem dev/mem/memutil.c optional mem dev/mfi/mfi.c optional mfi dev/mfi/mfi_debug.c optional mfi dev/mfi/mfi_pci.c optional mfi pci dev/mfi/mfi_disk.c optional mfi dev/mfi/mfi_syspd.c optional mfi dev/mfi/mfi_tbolt.c optional mfi dev/mfi/mfi_linux.c optional mfi compat_linux dev/mfi/mfi_cam.c optional mfip scbus dev/mii/acphy.c optional miibus | acphy dev/mii/amphy.c optional miibus | amphy dev/mii/atphy.c optional miibus | atphy dev/mii/axphy.c optional miibus | axphy dev/mii/bmtphy.c optional miibus | bmtphy dev/mii/brgphy.c optional miibus | brgphy dev/mii/ciphy.c optional miibus | ciphy dev/mii/e1000phy.c optional miibus | e1000phy dev/mii/gentbi.c optional miibus | gentbi dev/mii/icsphy.c optional miibus | icsphy dev/mii/ip1000phy.c optional miibus | ip1000phy dev/mii/jmphy.c optional miibus | jmphy dev/mii/lxtphy.c optional miibus | lxtphy dev/mii/micphy.c optional miibus fdt | micphy fdt dev/mii/mii.c optional miibus | mii dev/mii/mii_bitbang.c optional miibus | mii_bitbang dev/mii/mii_physubr.c optional miibus | mii dev/mii/mii_fdt.c optional miibus fdt | mii fdt dev/mii/miibus_if.m optional miibus | mii dev/mii/mlphy.c optional miibus | mlphy dev/mii/nsgphy.c optional miibus | nsgphy dev/mii/nsphy.c optional miibus | nsphy dev/mii/nsphyter.c optional miibus | nsphyter dev/mii/pnaphy.c optional miibus | pnaphy dev/mii/qsphy.c optional miibus | qsphy dev/mii/rdcphy.c optional miibus | rdcphy dev/mii/rgephy.c optional miibus | rgephy dev/mii/rlphy.c optional miibus | rlphy dev/mii/rlswitch.c optional rlswitch dev/mii/smcphy.c optional miibus | smcphy dev/mii/smscphy.c optional miibus | smscphy dev/mii/tdkphy.c optional miibus | tdkphy dev/mii/tlphy.c optional miibus | tlphy dev/mii/truephy.c optional miibus | truephy dev/mii/ukphy.c optional miibus | mii dev/mii/ukphy_subr.c optional miibus | mii dev/mii/vscphy.c optional miibus | vscphy dev/mii/xmphy.c optional miibus | xmphy dev/mk48txx/mk48txx.c optional mk48txx dev/mlxfw/mlxfw_fsm.c optional mlxfw \ compile-with "${MLXFW_C}" dev/mlxfw/mlxfw_mfa2.c optional mlxfw \ compile-with "${MLXFW_C}" dev/mlxfw/mlxfw_mfa2_tlv_multi.c optional mlxfw \ compile-with "${MLXFW_C}" dev/mlx/mlx.c optional mlx dev/mlx/mlx_disk.c optional mlx dev/mlx/mlx_pci.c optional mlx pci dev/mly/mly.c optional mly dev/mmc/mmc_subr.c optional mmc | mmcsd !mmccam dev/mmc/mmc.c optional mmc !mmccam dev/mmc/mmcbr_if.m standard dev/mmc/mmcbus_if.m standard dev/mmc/mmcsd.c optional mmcsd !mmccam dev/mmcnull/mmcnull.c optional mmcnull dev/mn/if_mn.c optional mn pci dev/mpr/mpr.c optional mpr dev/mpr/mpr_config.c optional mpr # XXX Work around clang warning, until maintainer approves fix. dev/mpr/mpr_mapping.c optional mpr \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/mpr/mpr_pci.c optional mpr pci dev/mpr/mpr_sas.c optional mpr \ compile-with "${NORMAL_C} ${NO_WUNNEEDED_INTERNAL_DECL}" dev/mpr/mpr_sas_lsi.c optional mpr dev/mpr/mpr_table.c optional mpr dev/mpr/mpr_user.c optional mpr dev/mps/mps.c optional mps dev/mps/mps_config.c optional mps # XXX Work around clang warning, until maintainer approves fix. dev/mps/mps_mapping.c optional mps \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/mps/mps_pci.c optional mps pci dev/mps/mps_sas.c optional mps \ compile-with "${NORMAL_C} ${NO_WUNNEEDED_INTERNAL_DECL}" dev/mps/mps_sas_lsi.c optional mps dev/mps/mps_table.c optional mps dev/mps/mps_user.c optional mps dev/mpt/mpt.c optional mpt dev/mpt/mpt_cam.c optional mpt dev/mpt/mpt_debug.c optional mpt dev/mpt/mpt_pci.c optional mpt pci dev/mpt/mpt_raid.c optional mpt dev/mpt/mpt_user.c optional mpt dev/mrsas/mrsas.c optional mrsas dev/mrsas/mrsas_cam.c optional mrsas dev/mrsas/mrsas_ioctl.c optional mrsas dev/mrsas/mrsas_fp.c optional mrsas dev/msk/if_msk.c optional msk dev/mvs/mvs.c optional mvs dev/mvs/mvs_if.m optional mvs dev/mvs/mvs_pci.c optional mvs pci dev/mwl/if_mwl.c optional mwl dev/mwl/if_mwl_pci.c optional mwl pci dev/mwl/mwlhal.c optional mwl mwlfw.c optional mwlfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk mw88W8363.fw:mw88W8363fw mwlboot.fw:mwlboot -mmwl -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "mwlfw.c" mw88W8363.fwo optional mwlfw \ dependency "mw88W8363.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "mw88W8363.fwo" mw88W8363.fw optional mwlfw \ dependency "$S/contrib/dev/mwl/mw88W8363.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "mw88W8363.fw" mwlboot.fwo optional mwlfw \ dependency "mwlboot.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "mwlboot.fwo" mwlboot.fw optional mwlfw \ dependency "$S/contrib/dev/mwl/mwlboot.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "mwlboot.fw" dev/mxge/if_mxge.c optional mxge pci dev/mxge/mxge_eth_z8e.c optional mxge pci dev/mxge/mxge_ethp_z8e.c optional mxge pci dev/mxge/mxge_rss_eth_z8e.c optional mxge pci dev/mxge/mxge_rss_ethp_z8e.c optional mxge pci dev/my/if_my.c optional my dev/netmap/if_ptnet.c optional netmap inet dev/netmap/netmap.c optional netmap dev/netmap/netmap_bdg.c optional netmap dev/netmap/netmap_freebsd.c optional netmap dev/netmap/netmap_generic.c optional netmap dev/netmap/netmap_kloop.c optional netmap dev/netmap/netmap_legacy.c optional netmap dev/netmap/netmap_mbq.c optional netmap dev/netmap/netmap_mem2.c optional netmap dev/netmap/netmap_monitor.c optional netmap dev/netmap/netmap_null.c optional netmap dev/netmap/netmap_offloadings.c optional netmap dev/netmap/netmap_pipe.c optional netmap dev/netmap/netmap_pt.c optional netmap dev/netmap/netmap_vale.c optional netmap # compile-with "${NORMAL_C} -Wconversion -Wextra" dev/nfsmb/nfsmb.c optional nfsmb pci dev/nge/if_nge.c optional nge dev/nmdm/nmdm.c optional nmdm dev/nsp/nsp.c optional nsp dev/nsp/nsp_pccard.c optional nsp pccard dev/null/null.c standard dev/nvd/nvd.c optional nvd nvme dev/nvme/nvme.c optional nvme dev/nvme/nvme_ctrlr.c optional nvme dev/nvme/nvme_ctrlr_cmd.c optional nvme dev/nvme/nvme_ns.c optional nvme dev/nvme/nvme_ns_cmd.c optional nvme dev/nvme/nvme_qpair.c optional nvme dev/nvme/nvme_sim.c optional nvme scbus dev/nvme/nvme_sysctl.c optional nvme dev/nvme/nvme_test.c optional nvme dev/nvme/nvme_util.c optional nvme dev/oce/oce_hw.c optional oce pci dev/oce/oce_if.c optional oce pci dev/oce/oce_mbox.c optional oce pci dev/oce/oce_queue.c optional oce pci dev/oce/oce_sysctl.c optional oce pci dev/oce/oce_util.c optional oce pci dev/ocs_fc/ocs_pci.c optional ocs_fc pci dev/ocs_fc/ocs_ioctl.c optional ocs_fc pci dev/ocs_fc/ocs_os.c optional ocs_fc pci dev/ocs_fc/ocs_utils.c optional ocs_fc pci dev/ocs_fc/ocs_hw.c optional ocs_fc pci dev/ocs_fc/ocs_hw_queues.c optional ocs_fc pci dev/ocs_fc/sli4.c optional ocs_fc pci dev/ocs_fc/ocs_sm.c optional ocs_fc pci dev/ocs_fc/ocs_device.c optional ocs_fc pci dev/ocs_fc/ocs_xport.c optional ocs_fc pci dev/ocs_fc/ocs_domain.c optional ocs_fc pci dev/ocs_fc/ocs_sport.c optional ocs_fc pci dev/ocs_fc/ocs_els.c optional ocs_fc pci dev/ocs_fc/ocs_fabric.c optional ocs_fc pci dev/ocs_fc/ocs_io.c optional ocs_fc pci dev/ocs_fc/ocs_node.c optional ocs_fc pci dev/ocs_fc/ocs_scsi.c optional ocs_fc pci dev/ocs_fc/ocs_unsol.c optional ocs_fc pci dev/ocs_fc/ocs_ddump.c optional ocs_fc pci dev/ocs_fc/ocs_mgmt.c optional ocs_fc pci dev/ocs_fc/ocs_cam.c optional ocs_fc pci dev/ofw/ofw_bus_if.m optional fdt dev/ofw/ofw_bus_subr.c optional fdt dev/ofw/ofw_cpu.c optional fdt dev/ofw/ofw_fdt.c optional fdt dev/ofw/ofw_if.m optional fdt dev/ofw/ofw_graph.c optional fdt dev/ofw/ofw_subr.c optional fdt dev/ofw/ofwbus.c optional fdt dev/ofw/openfirm.c optional fdt dev/ofw/openfirmio.c optional fdt dev/ow/ow.c optional ow \ dependency "owll_if.h" \ dependency "own_if.h" dev/ow/owll_if.m optional ow dev/ow/own_if.m optional ow dev/ow/ow_temp.c optional ow_temp dev/ow/owc_gpiobus.c optional owc gpio dev/pbio/pbio.c optional pbio isa dev/pccard/card_if.m standard dev/pccard/pccard.c optional pccard dev/pccard/pccard_cis.c optional pccard dev/pccard/pccard_cis_quirks.c optional pccard dev/pccard/pccard_device.c optional pccard dev/pccard/power_if.m standard dev/pccbb/pccbb.c optional cbb dev/pccbb/pccbb_isa.c optional cbb isa dev/pccbb/pccbb_pci.c optional cbb pci dev/pcf/pcf.c optional pcf dev/pci/fixup_pci.c optional pci dev/pci/hostb_pci.c optional pci dev/pci/ignore_pci.c optional pci dev/pci/isa_pci.c optional pci isa dev/pci/pci.c optional pci dev/pci/pci_if.m standard dev/pci/pci_iov.c optional pci pci_iov dev/pci/pci_iov_if.m standard dev/pci/pci_iov_schema.c optional pci pci_iov dev/pci/pci_pci.c optional pci dev/pci/pci_subr.c optional pci dev/pci/pci_user.c optional pci dev/pci/pcib_if.m standard dev/pci/pcib_support.c standard dev/pci/vga_pci.c optional pci dev/pms/freebsd/driver/ini/src/agtiapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sadisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/mpi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saframe.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sahw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sainit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saint.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sampicmd.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sampirsp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saphy.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sasata.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sasmp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sassp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/satimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sautil.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saioctlcmd.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/mpidebug.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dminit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmsmp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmdisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmtimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/sminit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsatcb.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsathw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smtimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdinit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdesgl.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdint.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdioctl.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdhw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/ossacmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tddmcmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdsmcmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdtimers.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdio.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdcb.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdinit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itddisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/sat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/ossasat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/sathw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/ppbus/if_plip.c optional plip dev/ppbus/immio.c optional vpo dev/ppbus/lpbb.c optional lpbb dev/ppbus/lpt.c optional lpt dev/ppbus/pcfclock.c optional pcfclock dev/ppbus/ppb_1284.c optional ppbus dev/ppbus/ppb_base.c optional ppbus dev/ppbus/ppb_msq.c optional ppbus dev/ppbus/ppbconf.c optional ppbus dev/ppbus/ppbus_if.m optional ppbus dev/ppbus/ppi.c optional ppi dev/ppbus/pps.c optional pps dev/ppbus/vpo.c optional vpo dev/ppbus/vpoio.c optional vpo dev/ppc/ppc.c optional ppc dev/ppc/ppc_acpi.c optional ppc acpi dev/ppc/ppc_isa.c optional ppc isa dev/ppc/ppc_pci.c optional ppc pci dev/ppc/ppc_puc.c optional ppc puc dev/proto/proto_bus_isa.c optional proto acpi | proto isa dev/proto/proto_bus_pci.c optional proto pci dev/proto/proto_busdma.c optional proto dev/proto/proto_core.c optional proto dev/pst/pst-iop.c optional pst dev/pst/pst-pci.c optional pst pci dev/pst/pst-raid.c optional pst dev/pty/pty.c optional pty dev/puc/puc.c optional puc dev/puc/puc_cfg.c optional puc dev/puc/puc_pccard.c optional puc pccard dev/puc/puc_pci.c optional puc pci dev/pwm/pwmc.c optional pwm | pwmc dev/pwm/pwmbus.c optional pwm | pwmbus dev/pwm/pwmbus_if.m optional pwm | pwmbus dev/pwm/ofw_pwm.c optional pwm fdt | pwmbus fdt dev/pwm/ofw_pwmbus.c optional pwm fdt | pwmbus fdt dev/quicc/quicc_core.c optional quicc dev/ral/rt2560.c optional ral dev/ral/rt2661.c optional ral dev/ral/rt2860.c optional ral dev/ral/if_ral_pci.c optional ral pci rt2561fw.c optional rt2561fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2561.fw:rt2561fw -mrt2561 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2561fw.c" rt2561fw.fwo optional rt2561fw | ralfw \ dependency "rt2561.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2561fw.fwo" rt2561.fw optional rt2561fw | ralfw \ dependency "$S/contrib/dev/ral/rt2561.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2561.fw" rt2561sfw.c optional rt2561sfw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2561s.fw:rt2561sfw -mrt2561s -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2561sfw.c" rt2561sfw.fwo optional rt2561sfw | ralfw \ dependency "rt2561s.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2561sfw.fwo" rt2561s.fw optional rt2561sfw | ralfw \ dependency "$S/contrib/dev/ral/rt2561s.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2561s.fw" rt2661fw.c optional rt2661fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2661.fw:rt2661fw -mrt2661 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2661fw.c" rt2661fw.fwo optional rt2661fw | ralfw \ dependency "rt2661.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2661fw.fwo" rt2661.fw optional rt2661fw | ralfw \ dependency "$S/contrib/dev/ral/rt2661.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2661.fw" rt2860fw.c optional rt2860fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2860.fw:rt2860fw -mrt2860 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2860fw.c" rt2860fw.fwo optional rt2860fw | ralfw \ dependency "rt2860.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2860fw.fwo" rt2860.fw optional rt2860fw | ralfw \ dependency "$S/contrib/dev/ral/rt2860.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2860.fw" dev/random/random_infra.c standard dev/random/random_harvestq.c standard dev/random/randomdev.c optional !random_loadable dev/random/fortuna.c optional !random_loadable dev/random/hash.c optional !random_loadable dev/rc/rc.c optional rc dev/rccgpio/rccgpio.c optional rccgpio gpio dev/re/if_re.c optional re dev/rl/if_rl.c optional rl pci dev/rndtest/rndtest.c optional rndtest dev/rp/rp.c optional rp dev/rp/rp_isa.c optional rp isa dev/rp/rp_pci.c optional rp pci # dev/rtwn/if_rtwn.c optional rtwn dev/rtwn/if_rtwn_beacon.c optional rtwn dev/rtwn/if_rtwn_calib.c optional rtwn dev/rtwn/if_rtwn_cam.c optional rtwn dev/rtwn/if_rtwn_efuse.c optional rtwn dev/rtwn/if_rtwn_fw.c optional rtwn dev/rtwn/if_rtwn_rx.c optional rtwn dev/rtwn/if_rtwn_task.c optional rtwn dev/rtwn/if_rtwn_tx.c optional rtwn # dev/rtwn/pci/rtwn_pci_attach.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_reg.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_rx.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_tx.c optional rtwn_pci pci # dev/rtwn/usb/rtwn_usb_attach.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_ep.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_reg.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_rx.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_tx.c optional rtwn_usb # RTL8188E dev/rtwn/rtl8188e/r88e_beacon.c optional rtwn dev/rtwn/rtl8188e/r88e_calib.c optional rtwn dev/rtwn/rtl8188e/r88e_chan.c optional rtwn dev/rtwn/rtl8188e/r88e_fw.c optional rtwn dev/rtwn/rtl8188e/r88e_init.c optional rtwn dev/rtwn/rtl8188e/r88e_led.c optional rtwn dev/rtwn/rtl8188e/r88e_tx.c optional rtwn dev/rtwn/rtl8188e/r88e_rf.c optional rtwn dev/rtwn/rtl8188e/r88e_rom.c optional rtwn dev/rtwn/rtl8188e/r88e_rx.c optional rtwn dev/rtwn/rtl8188e/pci/r88ee_attach.c optional rtwn_pci pci dev/rtwn/rtl8188e/pci/r88ee_init.c optional rtwn_pci pci dev/rtwn/rtl8188e/pci/r88ee_rx.c optional rtwn_pci pci dev/rtwn/rtl8188e/usb/r88eu_attach.c optional rtwn_usb dev/rtwn/rtl8188e/usb/r88eu_init.c optional rtwn_usb # RTL8192C dev/rtwn/rtl8192c/r92c_attach.c optional rtwn dev/rtwn/rtl8192c/r92c_beacon.c optional rtwn dev/rtwn/rtl8192c/r92c_calib.c optional rtwn dev/rtwn/rtl8192c/r92c_chan.c optional rtwn dev/rtwn/rtl8192c/r92c_fw.c optional rtwn dev/rtwn/rtl8192c/r92c_init.c optional rtwn dev/rtwn/rtl8192c/r92c_llt.c optional rtwn dev/rtwn/rtl8192c/r92c_rf.c optional rtwn dev/rtwn/rtl8192c/r92c_rom.c optional rtwn dev/rtwn/rtl8192c/r92c_rx.c optional rtwn dev/rtwn/rtl8192c/r92c_tx.c optional rtwn dev/rtwn/rtl8192c/pci/r92ce_attach.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_calib.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_fw.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_init.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_led.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_rx.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_tx.c optional rtwn_pci pci dev/rtwn/rtl8192c/usb/r92cu_attach.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_init.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_led.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_rx.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_tx.c optional rtwn_usb # RTL8192E dev/rtwn/rtl8192e/r92e_chan.c optional rtwn dev/rtwn/rtl8192e/r92e_fw.c optional rtwn dev/rtwn/rtl8192e/r92e_init.c optional rtwn dev/rtwn/rtl8192e/r92e_led.c optional rtwn dev/rtwn/rtl8192e/r92e_rf.c optional rtwn dev/rtwn/rtl8192e/r92e_rom.c optional rtwn dev/rtwn/rtl8192e/r92e_rx.c optional rtwn dev/rtwn/rtl8192e/usb/r92eu_attach.c optional rtwn_usb dev/rtwn/rtl8192e/usb/r92eu_init.c optional rtwn_usb # RTL8812A dev/rtwn/rtl8812a/r12a_beacon.c optional rtwn dev/rtwn/rtl8812a/r12a_calib.c optional rtwn dev/rtwn/rtl8812a/r12a_caps.c optional rtwn dev/rtwn/rtl8812a/r12a_chan.c optional rtwn dev/rtwn/rtl8812a/r12a_fw.c optional rtwn dev/rtwn/rtl8812a/r12a_init.c optional rtwn dev/rtwn/rtl8812a/r12a_led.c optional rtwn dev/rtwn/rtl8812a/r12a_rf.c optional rtwn dev/rtwn/rtl8812a/r12a_rom.c optional rtwn dev/rtwn/rtl8812a/r12a_rx.c optional rtwn dev/rtwn/rtl8812a/r12a_tx.c optional rtwn dev/rtwn/rtl8812a/usb/r12au_attach.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_init.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_rx.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_tx.c optional rtwn_usb # RTL8821A dev/rtwn/rtl8821a/r21a_beacon.c optional rtwn dev/rtwn/rtl8821a/r21a_calib.c optional rtwn dev/rtwn/rtl8821a/r21a_chan.c optional rtwn dev/rtwn/rtl8821a/r21a_fw.c optional rtwn dev/rtwn/rtl8821a/r21a_init.c optional rtwn dev/rtwn/rtl8821a/r21a_led.c optional rtwn dev/rtwn/rtl8821a/r21a_rom.c optional rtwn dev/rtwn/rtl8821a/r21a_rx.c optional rtwn dev/rtwn/rtl8821a/usb/r21au_attach.c optional rtwn_usb dev/rtwn/rtl8821a/usb/r21au_dfs.c optional rtwn_usb dev/rtwn/rtl8821a/usb/r21au_init.c optional rtwn_usb rtwn-rtl8188eefw.c optional rtwn-rtl8188eefw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8188eefw.fw:rtwn-rtl8188eefw:111 -mrtwn-rtl8188eefw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8188eefw.c" rtwn-rtl8188eefw.fwo optional rtwn-rtl8188eefw | rtwnfw \ dependency "rtwn-rtl8188eefw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8188eefw.fwo" rtwn-rtl8188eefw.fw optional rtwn-rtl8188eefw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8188eefw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8188eefw.fw" rtwn-rtl8188eufw.c optional rtwn-rtl8188eufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8188eufw.fw:rtwn-rtl8188eufw:111 -mrtwn-rtl8188eufw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8188eufw.c" rtwn-rtl8188eufw.fwo optional rtwn-rtl8188eufw | rtwnfw \ dependency "rtwn-rtl8188eufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8188eufw.fwo" rtwn-rtl8188eufw.fw optional rtwn-rtl8188eufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8188eufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8188eufw.fw" rtwn-rtl8192cfwE.c optional rtwn-rtl8192cfwE | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwE.fw:rtwn-rtl8192cfwE:111 -mrtwn-rtl8192cfwE -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwE.c" rtwn-rtl8192cfwE.fwo optional rtwn-rtl8192cfwE | rtwnfw \ dependency "rtwn-rtl8192cfwE.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwE.fwo" rtwn-rtl8192cfwE.fw optional rtwn-rtl8192cfwE | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwE.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwE.fw" rtwn-rtl8192cfwE_B.c optional rtwn-rtl8192cfwE_B | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwE_B.fw:rtwn-rtl8192cfwE_B:111 -mrtwn-rtl8192cfwE_B -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwE_B.c" rtwn-rtl8192cfwE_B.fwo optional rtwn-rtl8192cfwE_B | rtwnfw \ dependency "rtwn-rtl8192cfwE_B.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwE_B.fwo" rtwn-rtl8192cfwE_B.fw optional rtwn-rtl8192cfwE_B | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwE_B.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwE_B.fw" rtwn-rtl8192cfwT.c optional rtwn-rtl8192cfwT | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwT.fw:rtwn-rtl8192cfwT:111 -mrtwn-rtl8192cfwT -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwT.c" rtwn-rtl8192cfwT.fwo optional rtwn-rtl8192cfwT | rtwnfw \ dependency "rtwn-rtl8192cfwT.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwT.fwo" rtwn-rtl8192cfwT.fw optional rtwn-rtl8192cfwT | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwT.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwT.fw" rtwn-rtl8192cfwU.c optional rtwn-rtl8192cfwU | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwU.fw:rtwn-rtl8192cfwU:111 -mrtwn-rtl8192cfwU -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwU.c" rtwn-rtl8192cfwU.fwo optional rtwn-rtl8192cfwU | rtwnfw \ dependency "rtwn-rtl8192cfwU.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwU.fwo" rtwn-rtl8192cfwU.fw optional rtwn-rtl8192cfwU | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwU.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwU.fw" rtwn-rtl8192eufw.c optional rtwn-rtl8192eufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192eufw.fw:rtwn-rtl8192eufw:111 -mrtwn-rtl8192eufw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192eufw.c" rtwn-rtl8192eufw.fwo optional rtwn-rtl8192eufw | rtwnfw \ dependency "rtwn-rtl8192eufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192eufw.fwo" rtwn-rtl8192eufw.fw optional rtwn-rtl8192eufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192eufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192eufw.fw" rtwn-rtl8812aufw.c optional rtwn-rtl8812aufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8812aufw.fw:rtwn-rtl8812aufw:111 -mrtwn-rtl8812aufw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8812aufw.c" rtwn-rtl8812aufw.fwo optional rtwn-rtl8812aufw | rtwnfw \ dependency "rtwn-rtl8812aufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8812aufw.fwo" rtwn-rtl8812aufw.fw optional rtwn-rtl8812aufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8812aufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8812aufw.fw" rtwn-rtl8821aufw.c optional rtwn-rtl8821aufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8821aufw.fw:rtwn-rtl8821aufw:111 -mrtwn-rtl8821aufw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8821aufw.c" rtwn-rtl8821aufw.fwo optional rtwn-rtl8821aufw | rtwnfw \ dependency "rtwn-rtl8821aufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8821aufw.fwo" rtwn-rtl8821aufw.fw optional rtwn-rtl8821aufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8821aufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8821aufw.fw" dev/safe/safe.c optional safe dev/scc/scc_if.m optional scc dev/scc/scc_bfe_ebus.c optional scc ebus dev/scc/scc_bfe_quicc.c optional scc quicc dev/scc/scc_bfe_sbus.c optional scc fhc | scc sbus dev/scc/scc_core.c optional scc dev/scc/scc_dev_quicc.c optional scc quicc dev/scc/scc_dev_sab82532.c optional scc dev/scc/scc_dev_z8530.c optional scc dev/sdhci/sdhci.c optional sdhci dev/sdhci/sdhci_fdt.c optional sdhci fdt dev/sdhci/sdhci_fdt_gpio.c optional sdhci fdt gpio dev/sdhci/sdhci_if.m optional sdhci dev/sdhci/sdhci_acpi.c optional sdhci acpi dev/sdhci/sdhci_pci.c optional sdhci pci dev/sdio/sdio_if.m optional mmccam dev/sdio/sdio_subr.c optional mmccam dev/sdio/sdiob.c optional mmccam dev/sge/if_sge.c optional sge pci dev/siis/siis.c optional siis pci dev/sis/if_sis.c optional sis pci dev/sk/if_sk.c optional sk pci dev/smbus/smb.c optional smb dev/smbus/smbconf.c optional smbus dev/smbus/smbus.c optional smbus dev/smbus/smbus_if.m optional smbus dev/smc/if_smc.c optional smc dev/smc/if_smc_fdt.c optional smc fdt dev/snp/snp.c optional snp dev/sound/clone.c optional sound dev/sound/unit.c optional sound dev/sound/isa/ad1816.c optional snd_ad1816 isa dev/sound/isa/ess.c optional snd_ess isa dev/sound/isa/gusc.c optional snd_gusc isa dev/sound/isa/mss.c optional snd_mss isa dev/sound/isa/sb16.c optional snd_sb16 isa dev/sound/isa/sb8.c optional snd_sb8 isa dev/sound/isa/sbc.c optional snd_sbc isa dev/sound/isa/sndbuf_dma.c optional sound isa dev/sound/pci/als4000.c optional snd_als4000 pci dev/sound/pci/atiixp.c optional snd_atiixp pci dev/sound/pci/cmi.c optional snd_cmi pci dev/sound/pci/cs4281.c optional snd_cs4281 pci dev/sound/pci/csa.c optional snd_csa pci dev/sound/pci/csapcm.c optional snd_csa pci dev/sound/pci/ds1.c optional snd_ds1 pci dev/sound/pci/emu10k1.c optional snd_emu10k1 pci dev/sound/pci/emu10kx.c optional snd_emu10kx pci dev/sound/pci/emu10kx-pcm.c optional snd_emu10kx pci dev/sound/pci/emu10kx-midi.c optional snd_emu10kx pci dev/sound/pci/envy24.c optional snd_envy24 pci dev/sound/pci/envy24ht.c optional snd_envy24ht pci dev/sound/pci/es137x.c optional snd_es137x pci dev/sound/pci/fm801.c optional snd_fm801 pci dev/sound/pci/ich.c optional snd_ich pci dev/sound/pci/maestro.c optional snd_maestro pci dev/sound/pci/maestro3.c optional snd_maestro3 pci dev/sound/pci/neomagic.c optional snd_neomagic pci dev/sound/pci/solo.c optional snd_solo pci dev/sound/pci/spicds.c optional snd_spicds pci dev/sound/pci/t4dwave.c optional snd_t4dwave pci dev/sound/pci/via8233.c optional snd_via8233 pci dev/sound/pci/via82c686.c optional snd_via82c686 pci dev/sound/pci/vibes.c optional snd_vibes pci dev/sound/pci/hda/hdaa.c optional snd_hda pci dev/sound/pci/hda/hdaa_patches.c optional snd_hda pci dev/sound/pci/hda/hdac.c optional snd_hda pci dev/sound/pci/hda/hdac_if.m optional snd_hda pci dev/sound/pci/hda/hdacc.c optional snd_hda pci dev/sound/pci/hdspe.c optional snd_hdspe pci dev/sound/pci/hdspe-pcm.c optional snd_hdspe pci dev/sound/pcm/ac97.c optional sound dev/sound/pcm/ac97_if.m optional sound dev/sound/pcm/ac97_patch.c optional sound dev/sound/pcm/buffer.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/channel.c optional sound dev/sound/pcm/channel_if.m optional sound dev/sound/pcm/dsp.c optional sound dev/sound/pcm/feeder.c optional sound dev/sound/pcm/feeder_chain.c optional sound dev/sound/pcm/feeder_eq.c optional sound \ dependency "feeder_eq_gen.h" \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_if.m optional sound dev/sound/pcm/feeder_format.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_matrix.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_mixer.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_rate.c optional sound \ dependency "feeder_rate_gen.h" \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_volume.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/mixer.c optional sound dev/sound/pcm/mixer_if.m optional sound dev/sound/pcm/sndstat.c optional sound dev/sound/pcm/sound.c optional sound dev/sound/pcm/vchan.c optional sound dev/sound/usb/uaudio.c optional snd_uaudio usb dev/sound/usb/uaudio_pcm.c optional snd_uaudio usb dev/sound/midi/midi.c optional sound dev/sound/midi/mpu401.c optional sound dev/sound/midi/mpu_if.m optional sound dev/sound/midi/mpufoi_if.m optional sound dev/sound/midi/sequencer.c optional sound dev/sound/midi/synth_if.m optional sound dev/spibus/ofw_spibus.c optional fdt spibus dev/spibus/spibus.c optional spibus \ dependency "spibus_if.h" dev/spibus/spigen.c optional spigen dev/spibus/spibus_if.m optional spibus dev/ste/if_ste.c optional ste pci dev/stge/if_stge.c optional stge dev/sym/sym_hipd.c optional sym \ dependency "$S/dev/sym/sym_{conf,defs}.h" dev/syscons/blank/blank_saver.c optional blank_saver dev/syscons/daemon/daemon_saver.c optional daemon_saver dev/syscons/dragon/dragon_saver.c optional dragon_saver dev/syscons/fade/fade_saver.c optional fade_saver dev/syscons/fire/fire_saver.c optional fire_saver dev/syscons/green/green_saver.c optional green_saver dev/syscons/logo/logo.c optional logo_saver dev/syscons/logo/logo_saver.c optional logo_saver dev/syscons/rain/rain_saver.c optional rain_saver dev/syscons/schistory.c optional sc dev/syscons/scmouse.c optional sc dev/syscons/scterm.c optional sc dev/syscons/scterm-dumb.c optional sc !SC_NO_TERM_DUMB dev/syscons/scterm-sc.c optional sc !SC_NO_TERM_SC dev/syscons/scterm-teken.c optional sc !SC_NO_TERM_TEKEN dev/syscons/scvidctl.c optional sc dev/syscons/scvtb.c optional sc dev/syscons/snake/snake_saver.c optional snake_saver dev/syscons/star/star_saver.c optional star_saver dev/syscons/syscons.c optional sc dev/syscons/sysmouse.c optional sc dev/syscons/warp/warp_saver.c optional warp_saver dev/tcp_log/tcp_log_dev.c optional tcp_blackbox inet | tcp_blackbox inet6 dev/tdfx/tdfx_linux.c optional tdfx_linux tdfx compat_linux dev/tdfx/tdfx_pci.c optional tdfx pci dev/ti/if_ti.c optional ti pci dev/trm/trm.c optional trm dev/twa/tw_cl_init.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_intr.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_io.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_misc.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_cam.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_freebsd.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twe/twe.c optional twe dev/twe/twe_freebsd.c optional twe dev/tws/tws.c optional tws dev/tws/tws_cam.c optional tws dev/tws/tws_hdm.c optional tws dev/tws/tws_services.c optional tws dev/tws/tws_user.c optional tws dev/uart/uart_bus_acpi.c optional uart acpi dev/uart/uart_bus_ebus.c optional uart ebus dev/uart/uart_bus_fdt.c optional uart fdt dev/uart/uart_bus_isa.c optional uart isa dev/uart/uart_bus_pccard.c optional uart pccard dev/uart/uart_bus_pci.c optional uart pci dev/uart/uart_bus_puc.c optional uart puc dev/uart/uart_bus_scc.c optional uart scc dev/uart/uart_core.c optional uart dev/uart/uart_cpu_acpi.c optional uart acpi dev/uart/uart_dbg.c optional uart gdb dev/uart/uart_dev_msm.c optional uart uart_msm fdt dev/uart/uart_dev_mvebu.c optional uart uart_mvebu dev/uart/uart_dev_ns8250.c optional uart uart_ns8250 | uart uart_snps dev/uart/uart_dev_pl011.c optional uart pl011 dev/uart/uart_dev_quicc.c optional uart quicc dev/uart/uart_dev_sab82532.c optional uart uart_sab82532 dev/uart/uart_dev_sab82532.c optional uart scc dev/uart/uart_dev_snps.c optional uart uart_snps fdt dev/uart/uart_dev_z8530.c optional uart uart_z8530 dev/uart/uart_dev_z8530.c optional uart scc dev/uart/uart_if.m optional uart dev/uart/uart_subr.c optional uart dev/uart/uart_tty.c optional uart dev/ubsec/ubsec.c optional ubsec # # USB controller drivers # dev/usb/controller/musb_otg.c optional musb dev/usb/controller/dwc_otg.c optional dwcotg dev/usb/controller/dwc_otg_fdt.c optional dwcotg fdt dev/usb/controller/ehci.c optional ehci dev/usb/controller/ehci_msm.c optional ehci_msm fdt dev/usb/controller/ehci_pci.c optional ehci pci dev/usb/controller/ohci.c optional ohci dev/usb/controller/ohci_pci.c optional ohci pci dev/usb/controller/uhci.c optional uhci dev/usb/controller/uhci_pci.c optional uhci pci dev/usb/controller/xhci.c optional xhci dev/usb/controller/xhci_pci.c optional xhci pci dev/usb/controller/saf1761_otg.c optional saf1761otg dev/usb/controller/saf1761_otg_fdt.c optional saf1761otg fdt dev/usb/controller/uss820dci.c optional uss820dci dev/usb/controller/usb_controller.c optional usb # # USB storage drivers # dev/usb/storage/cfumass.c optional cfumass ctl dev/usb/storage/umass.c optional umass dev/usb/storage/urio.c optional urio dev/usb/storage/ustorage_fs.c optional usfs # # USB core # dev/usb/usb_busdma.c optional usb dev/usb/usb_core.c optional usb dev/usb/usb_debug.c optional usb dev/usb/usb_dev.c optional usb dev/usb/usb_device.c optional usb dev/usb/usb_dynamic.c optional usb dev/usb/usb_error.c optional usb dev/usb/usb_fdt_support.c optional usb fdt dev/usb/usb_generic.c optional usb dev/usb/usb_handle_request.c optional usb dev/usb/usb_hid.c optional usb dev/usb/usb_hub.c optional usb dev/usb/usb_hub_acpi.c optional uacpi acpi dev/usb/usb_if.m optional usb dev/usb/usb_lookup.c optional usb dev/usb/usb_mbuf.c optional usb dev/usb/usb_msctest.c optional usb dev/usb/usb_parse.c optional usb dev/usb/usb_pf.c optional usb dev/usb/usb_process.c optional usb dev/usb/usb_request.c optional usb dev/usb/usb_transfer.c optional usb dev/usb/usb_util.c optional usb # # USB network drivers # dev/usb/net/if_aue.c optional aue dev/usb/net/if_axe.c optional axe dev/usb/net/if_axge.c optional axge dev/usb/net/if_cdce.c optional cdce dev/usb/net/if_cue.c optional cue dev/usb/net/if_ipheth.c optional ipheth dev/usb/net/if_kue.c optional kue dev/usb/net/if_mos.c optional mos dev/usb/net/if_muge.c optional muge dev/usb/net/if_rue.c optional rue dev/usb/net/if_smsc.c optional smsc dev/usb/net/if_udav.c optional udav dev/usb/net/if_ure.c optional ure dev/usb/net/if_usie.c optional usie dev/usb/net/if_urndis.c optional urndis dev/usb/net/ruephy.c optional rue dev/usb/net/usb_ethernet.c optional uether | aue | axe | axge | cdce | \ cue | ipheth | kue | mos | rue | \ smsc | udav | ure | urndis | muge dev/usb/net/uhso.c optional uhso # # USB WLAN drivers # dev/usb/wlan/if_rsu.c optional rsu rsu-rtl8712fw.c optional rsu-rtl8712fw | rsufw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rsu-rtl8712fw.fw:rsu-rtl8712fw:120 -mrsu-rtl8712fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rsu-rtl8712fw.c" rsu-rtl8712fw.fwo optional rsu-rtl8712fw | rsufw \ dependency "rsu-rtl8712fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rsu-rtl8712fw.fwo" rsu-rtl8712fw.fw optional rsu-rtl8712.fw | rsufw \ dependency "$S/contrib/dev/rsu/rsu-rtl8712fw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rsu-rtl8712fw.fw" dev/usb/wlan/if_rum.c optional rum dev/usb/wlan/if_run.c optional run runfw.c optional runfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk run.fw:runfw -mrunfw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "runfw.c" runfw.fwo optional runfw \ dependency "run.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "runfw.fwo" run.fw optional runfw \ dependency "$S/contrib/dev/run/rt2870.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "run.fw" dev/usb/wlan/if_uath.c optional uath dev/usb/wlan/if_upgt.c optional upgt dev/usb/wlan/if_ural.c optional ural dev/usb/wlan/if_urtw.c optional urtw dev/usb/wlan/if_zyd.c optional zyd # # USB serial and parallel port drivers # dev/usb/serial/u3g.c optional u3g dev/usb/serial/uark.c optional uark dev/usb/serial/ubsa.c optional ubsa dev/usb/serial/ubser.c optional ubser dev/usb/serial/uchcom.c optional uchcom dev/usb/serial/ucycom.c optional ucycom dev/usb/serial/ufoma.c optional ufoma dev/usb/serial/uftdi.c optional uftdi dev/usb/serial/ugensa.c optional ugensa dev/usb/serial/uipaq.c optional uipaq dev/usb/serial/ulpt.c optional ulpt dev/usb/serial/umcs.c optional umcs dev/usb/serial/umct.c optional umct dev/usb/serial/umodem.c optional umodem dev/usb/serial/umoscom.c optional umoscom dev/usb/serial/uplcom.c optional uplcom dev/usb/serial/uslcom.c optional uslcom dev/usb/serial/uvisor.c optional uvisor dev/usb/serial/uvscom.c optional uvscom dev/usb/serial/usb_serial.c optional ucom | u3g | uark | ubsa | ubser | \ uchcom | ucycom | ufoma | uftdi | \ ugensa | uipaq | umcs | umct | \ umodem | umoscom | uplcom | usie | \ uslcom | uvisor | uvscom # # USB misc drivers # dev/usb/misc/ufm.c optional ufm dev/usb/misc/udbp.c optional udbp dev/usb/misc/ugold.c optional ugold dev/usb/misc/uled.c optional uled # # USB input drivers # dev/usb/input/atp.c optional atp dev/usb/input/uep.c optional uep dev/usb/input/uhid.c optional uhid dev/usb/input/uhid_snes.c optional uhid_snes dev/usb/input/ukbd.c optional ukbd dev/usb/input/ums.c optional ums dev/usb/input/wmt.c optional wmt dev/usb/input/wsp.c optional wsp # # USB quirks # dev/usb/quirk/usb_quirk.c optional usb # # USB templates # dev/usb/template/usb_template.c optional usb_template dev/usb/template/usb_template_audio.c optional usb_template dev/usb/template/usb_template_cdce.c optional usb_template dev/usb/template/usb_template_kbd.c optional usb_template dev/usb/template/usb_template_modem.c optional usb_template dev/usb/template/usb_template_mouse.c optional usb_template dev/usb/template/usb_template_msc.c optional usb_template dev/usb/template/usb_template_mtp.c optional usb_template dev/usb/template/usb_template_phone.c optional usb_template dev/usb/template/usb_template_serialnet.c optional usb_template dev/usb/template/usb_template_midi.c optional usb_template dev/usb/template/usb_template_multi.c optional usb_template # # USB video drivers # dev/usb/video/udl.c optional udl # # USB END # dev/videomode/videomode.c optional videomode dev/videomode/edid.c optional videomode dev/videomode/pickmode.c optional videomode dev/videomode/vesagtf.c optional videomode dev/veriexec/verified_exec.c optional veriexec mac_veriexec dev/vge/if_vge.c optional vge dev/viapm/viapm.c optional viapm pci dev/virtio/virtio.c optional virtio dev/virtio/virtqueue.c optional virtio dev/virtio/virtio_bus_if.m optional virtio dev/virtio/virtio_if.m optional virtio dev/virtio/pci/virtio_pci.c optional virtio_pci dev/virtio/mmio/virtio_mmio.c optional virtio_mmio dev/virtio/mmio/virtio_mmio_acpi.c optional virtio_mmio acpi dev/virtio/mmio/virtio_mmio_fdt.c optional virtio_mmio fdt dev/virtio/mmio/virtio_mmio_if.m optional virtio_mmio dev/virtio/network/if_vtnet.c optional vtnet dev/virtio/block/virtio_blk.c optional virtio_blk dev/virtio/balloon/virtio_balloon.c optional virtio_balloon dev/virtio/scsi/virtio_scsi.c optional virtio_scsi dev/virtio/random/virtio_random.c optional virtio_random dev/virtio/console/virtio_console.c optional virtio_console dev/vkbd/vkbd.c optional vkbd dev/vr/if_vr.c optional vr pci dev/vt/colors/vt_termcolors.c optional vt dev/vt/font/vt_font_default.c optional vt dev/vt/font/vt_mouse_cursor.c optional vt dev/vt/hw/efifb/efifb.c optional vt_efifb dev/vt/hw/fb/vt_fb.c optional vt dev/vt/hw/vga/vt_vga.c optional vt vt_vga dev/vt/logo/logo_freebsd.c optional vt splash dev/vt/logo/logo_beastie.c optional vt splash dev/vt/vt_buf.c optional vt dev/vt/vt_consolectl.c optional vt dev/vt/vt_core.c optional vt dev/vt/vt_cpulogos.c optional vt splash dev/vt/vt_font.c optional vt dev/vt/vt_sysmouse.c optional vt dev/vte/if_vte.c optional vte pci dev/vx/if_vx.c optional vx dev/vx/if_vx_pci.c optional vx pci dev/watchdog/watchdog.c standard dev/wi/if_wi.c optional wi dev/wi/if_wi_pccard.c optional wi pccard dev/wi/if_wi_pci.c optional wi pci dev/wpi/if_wpi.c optional wpi pci wpifw.c optional wpifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk wpi.fw:wpifw:153229 -mwpi -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "wpifw.c" wpifw.fwo optional wpifw \ dependency "wpi.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "wpifw.fwo" wpi.fw optional wpifw \ dependency "$S/contrib/dev/wpi/iwlwifi-3945-15.32.2.9.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "wpi.fw" dev/xdma/controller/pl330.c optional xdma pl330 dev/xdma/xdma.c optional xdma dev/xdma/xdma_bank.c optional xdma dev/xdma/xdma_bio.c optional xdma dev/xdma/xdma_fdt_test.c optional xdma xdma_test fdt dev/xdma/xdma_if.m optional xdma dev/xdma/xdma_iommu.c optional xdma dev/xdma/xdma_mbuf.c optional xdma dev/xdma/xdma_queue.c optional xdma dev/xdma/xdma_sg.c optional xdma dev/xdma/xdma_sglist.c optional xdma dev/xen/balloon/balloon.c optional xenhvm dev/xen/blkfront/blkfront.c optional xenhvm dev/xen/blkback/blkback.c optional xenhvm dev/xen/console/xen_console.c optional xenhvm dev/xen/control/control.c optional xenhvm dev/xen/grant_table/grant_table.c optional xenhvm dev/xen/netback/netback.c optional xenhvm dev/xen/netfront/netfront.c optional xenhvm dev/xen/xenpci/xenpci.c optional xenpci dev/xen/timer/timer.c optional xenhvm dev/xen/pvcpu/pvcpu.c optional xenhvm dev/xen/xenstore/xenstore.c optional xenhvm dev/xen/xenstore/xenstore_dev.c optional xenhvm dev/xen/xenstore/xenstored_dev.c optional xenhvm dev/xen/evtchn/evtchn_dev.c optional xenhvm dev/xen/privcmd/privcmd.c optional xenhvm dev/xen/gntdev/gntdev.c optional xenhvm dev/xen/debug/debug.c optional xenhvm dev/xl/if_xl.c optional xl pci dev/xl/xlphy.c optional xl pci fs/autofs/autofs.c optional autofs fs/autofs/autofs_vfsops.c optional autofs fs/autofs/autofs_vnops.c optional autofs fs/deadfs/dead_vnops.c standard fs/devfs/devfs_devs.c standard fs/devfs/devfs_dir.c standard fs/devfs/devfs_rule.c standard fs/devfs/devfs_vfsops.c standard fs/devfs/devfs_vnops.c standard fs/fdescfs/fdesc_vfsops.c optional fdescfs fs/fdescfs/fdesc_vnops.c optional fdescfs fs/fifofs/fifo_vnops.c standard fs/cuse/cuse.c optional cuse fs/fuse/fuse_device.c optional fusefs fs/fuse/fuse_file.c optional fusefs fs/fuse/fuse_internal.c optional fusefs fs/fuse/fuse_io.c optional fusefs fs/fuse/fuse_ipc.c optional fusefs fs/fuse/fuse_main.c optional fusefs fs/fuse/fuse_node.c optional fusefs fs/fuse/fuse_vfsops.c optional fusefs fs/fuse/fuse_vnops.c optional fusefs fs/msdosfs/msdosfs_conv.c optional msdosfs fs/msdosfs/msdosfs_denode.c optional msdosfs fs/msdosfs/msdosfs_fat.c optional msdosfs fs/msdosfs/msdosfs_iconv.c optional msdosfs_iconv fs/msdosfs/msdosfs_lookup.c optional msdosfs fs/msdosfs/msdosfs_vfsops.c optional msdosfs fs/msdosfs/msdosfs_vnops.c optional msdosfs fs/nfs/nfs_commonkrpc.c optional nfscl | nfsd fs/nfs/nfs_commonsubs.c optional nfscl | nfsd fs/nfs/nfs_commonport.c optional nfscl | nfsd fs/nfs/nfs_commonacl.c optional nfscl | nfsd fs/nfsclient/nfs_clcomsubs.c optional nfscl fs/nfsclient/nfs_clsubs.c optional nfscl fs/nfsclient/nfs_clstate.c optional nfscl fs/nfsclient/nfs_clkrpc.c optional nfscl fs/nfsclient/nfs_clrpcops.c optional nfscl fs/nfsclient/nfs_clvnops.c optional nfscl fs/nfsclient/nfs_clnode.c optional nfscl fs/nfsclient/nfs_clvfsops.c optional nfscl fs/nfsclient/nfs_clport.c optional nfscl fs/nfsclient/nfs_clbio.c optional nfscl fs/nfsclient/nfs_clnfsiod.c optional nfscl fs/nfsserver/nfs_fha_new.c optional nfsd inet fs/nfsserver/nfs_nfsdsocket.c optional nfsd inet fs/nfsserver/nfs_nfsdsubs.c optional nfsd inet fs/nfsserver/nfs_nfsdstate.c optional nfsd inet fs/nfsserver/nfs_nfsdkrpc.c optional nfsd inet fs/nfsserver/nfs_nfsdserv.c optional nfsd inet fs/nfsserver/nfs_nfsdport.c optional nfsd inet fs/nfsserver/nfs_nfsdcache.c optional nfsd inet fs/nullfs/null_subr.c optional nullfs fs/nullfs/null_vfsops.c optional nullfs fs/nullfs/null_vnops.c optional nullfs fs/procfs/procfs.c optional procfs fs/procfs/procfs_dbregs.c optional procfs fs/procfs/procfs_fpregs.c optional procfs fs/procfs/procfs_ioctl.c optional procfs fs/procfs/procfs_map.c optional procfs fs/procfs/procfs_mem.c optional procfs fs/procfs/procfs_note.c optional procfs fs/procfs/procfs_osrel.c optional procfs fs/procfs/procfs_regs.c optional procfs fs/procfs/procfs_rlimit.c optional procfs fs/procfs/procfs_status.c optional procfs fs/procfs/procfs_type.c optional procfs fs/pseudofs/pseudofs.c optional pseudofs fs/pseudofs/pseudofs_fileno.c optional pseudofs fs/pseudofs/pseudofs_vncache.c optional pseudofs fs/pseudofs/pseudofs_vnops.c optional pseudofs fs/smbfs/smbfs_io.c optional smbfs fs/smbfs/smbfs_node.c optional smbfs fs/smbfs/smbfs_smb.c optional smbfs fs/smbfs/smbfs_subr.c optional smbfs fs/smbfs/smbfs_vfsops.c optional smbfs fs/smbfs/smbfs_vnops.c optional smbfs fs/udf/osta.c optional udf fs/udf/udf_iconv.c optional udf_iconv fs/udf/udf_vfsops.c optional udf fs/udf/udf_vnops.c optional udf fs/unionfs/union_subr.c optional unionfs fs/unionfs/union_vfsops.c optional unionfs fs/unionfs/union_vnops.c optional unionfs fs/tmpfs/tmpfs_vnops.c optional tmpfs fs/tmpfs/tmpfs_fifoops.c optional tmpfs fs/tmpfs/tmpfs_vfsops.c optional tmpfs fs/tmpfs/tmpfs_subr.c optional tmpfs gdb/gdb_cons.c optional gdb gdb/gdb_main.c optional gdb gdb/gdb_packet.c optional gdb geom/bde/g_bde.c optional geom_bde geom/bde/g_bde_crypt.c optional geom_bde geom/bde/g_bde_lock.c optional geom_bde geom/bde/g_bde_work.c optional geom_bde geom/cache/g_cache.c optional geom_cache geom/concat/g_concat.c optional geom_concat geom/eli/g_eli.c optional geom_eli geom/eli/g_eli_crypto.c optional geom_eli geom/eli/g_eli_ctl.c optional geom_eli geom/eli/g_eli_hmac.c optional geom_eli geom/eli/g_eli_integrity.c optional geom_eli geom/eli/g_eli_key.c optional geom_eli geom/eli/g_eli_key_cache.c optional geom_eli geom/eli/g_eli_privacy.c optional geom_eli geom/eli/pkcs5v2.c optional geom_eli geom/gate/g_gate.c optional geom_gate geom/geom_bsd.c optional geom_bsd geom/geom_bsd_enc.c optional geom_bsd | geom_part_bsd geom/geom_ccd.c optional ccd | geom_ccd geom/geom_ctl.c standard geom/geom_dev.c standard geom/geom_disk.c standard geom/geom_dump.c standard geom/geom_event.c standard geom/geom_fox.c optional geom_fox geom/geom_flashmap.c optional fdt cfi | fdt mx25l | mmcsd | fdt n25q | fdt at45d geom/geom_io.c standard geom/geom_kern.c standard geom/geom_map.c optional geom_map geom/geom_mbr.c optional geom_mbr geom/geom_mbr_enc.c optional geom_mbr geom/geom_redboot.c optional geom_redboot geom/geom_slice.c standard geom/geom_subr.c standard geom/geom_sunlabel.c optional geom_sunlabel geom/geom_sunlabel_enc.c optional geom_sunlabel geom/geom_vfs.c standard geom/geom_vol_ffs.c optional geom_vol geom/journal/g_journal.c optional geom_journal geom/journal/g_journal_ufs.c optional geom_journal geom/label/g_label.c optional geom_label | geom_label_gpt geom/label/g_label_ext2fs.c optional geom_label geom/label/g_label_flashmap.c optional geom_label geom/label/g_label_iso9660.c optional geom_label geom/label/g_label_msdosfs.c optional geom_label geom/label/g_label_ntfs.c optional geom_label geom/label/g_label_reiserfs.c optional geom_label geom/label/g_label_ufs.c optional geom_label geom/label/g_label_gpt.c optional geom_label | geom_label_gpt geom/label/g_label_disk_ident.c optional geom_label geom/linux_lvm/g_linux_lvm.c optional geom_linux_lvm geom/mirror/g_mirror.c optional geom_mirror geom/mirror/g_mirror_ctl.c optional geom_mirror geom/mountver/g_mountver.c optional geom_mountver geom/multipath/g_multipath.c optional geom_multipath geom/nop/g_nop.c optional geom_nop geom/part/g_part.c standard geom/part/g_part_if.m standard geom/part/g_part_apm.c optional geom_part_apm geom/part/g_part_bsd.c optional geom_part_bsd geom/part/g_part_bsd64.c optional geom_part_bsd64 geom/part/g_part_ebr.c optional geom_part_ebr geom/part/g_part_gpt.c optional geom_part_gpt geom/part/g_part_ldm.c optional geom_part_ldm geom/part/g_part_mbr.c optional geom_part_mbr geom/part/g_part_vtoc8.c optional geom_part_vtoc8 geom/raid/g_raid.c optional geom_raid geom/raid/g_raid_ctl.c optional geom_raid geom/raid/g_raid_md_if.m optional geom_raid geom/raid/g_raid_tr_if.m optional geom_raid geom/raid/md_ddf.c optional geom_raid geom/raid/md_intel.c optional geom_raid geom/raid/md_jmicron.c optional geom_raid geom/raid/md_nvidia.c optional geom_raid geom/raid/md_promise.c optional geom_raid geom/raid/md_sii.c optional geom_raid geom/raid/tr_concat.c optional geom_raid geom/raid/tr_raid0.c optional geom_raid geom/raid/tr_raid1.c optional geom_raid geom/raid/tr_raid1e.c optional geom_raid geom/raid/tr_raid5.c optional geom_raid geom/raid3/g_raid3.c optional geom_raid3 geom/raid3/g_raid3_ctl.c optional geom_raid3 geom/shsec/g_shsec.c optional geom_shsec geom/stripe/g_stripe.c optional geom_stripe geom/uzip/g_uzip.c optional geom_uzip geom/uzip/g_uzip_lzma.c optional geom_uzip geom/uzip/g_uzip_wrkthr.c optional geom_uzip geom/uzip/g_uzip_zlib.c optional geom_uzip geom/vinum/geom_vinum.c optional geom_vinum geom/vinum/geom_vinum_create.c optional geom_vinum geom/vinum/geom_vinum_drive.c optional geom_vinum geom/vinum/geom_vinum_plex.c optional geom_vinum geom/vinum/geom_vinum_volume.c optional geom_vinum geom/vinum/geom_vinum_subr.c optional geom_vinum geom/vinum/geom_vinum_raid5.c optional geom_vinum geom/vinum/geom_vinum_share.c optional geom_vinum geom/vinum/geom_vinum_list.c optional geom_vinum geom/vinum/geom_vinum_rm.c optional geom_vinum geom/vinum/geom_vinum_init.c optional geom_vinum geom/vinum/geom_vinum_state.c optional geom_vinum geom/vinum/geom_vinum_rename.c optional geom_vinum geom/vinum/geom_vinum_move.c optional geom_vinum geom/vinum/geom_vinum_events.c optional geom_vinum geom/virstor/binstream.c optional geom_virstor geom/virstor/g_virstor.c optional geom_virstor geom/virstor/g_virstor_md.c optional geom_virstor geom/zero/g_zero.c optional geom_zero fs/ext2fs/ext2_acl.c optional ext2fs fs/ext2fs/ext2_alloc.c optional ext2fs fs/ext2fs/ext2_balloc.c optional ext2fs fs/ext2fs/ext2_bmap.c optional ext2fs fs/ext2fs/ext2_csum.c optional ext2fs fs/ext2fs/ext2_extattr.c optional ext2fs fs/ext2fs/ext2_extents.c optional ext2fs fs/ext2fs/ext2_inode.c optional ext2fs fs/ext2fs/ext2_inode_cnv.c optional ext2fs fs/ext2fs/ext2_hash.c optional ext2fs fs/ext2fs/ext2_htree.c optional ext2fs fs/ext2fs/ext2_lookup.c optional ext2fs fs/ext2fs/ext2_subr.c optional ext2fs fs/ext2fs/ext2_vfsops.c optional ext2fs fs/ext2fs/ext2_vnops.c optional ext2fs # isa/isa_if.m standard isa/isa_common.c optional isa isa/isahint.c optional isa isa/pnp.c optional isa isapnp isa/pnpparse.c optional isa isapnp fs/cd9660/cd9660_bmap.c optional cd9660 fs/cd9660/cd9660_lookup.c optional cd9660 fs/cd9660/cd9660_node.c optional cd9660 fs/cd9660/cd9660_rrip.c optional cd9660 fs/cd9660/cd9660_util.c optional cd9660 fs/cd9660/cd9660_vfsops.c optional cd9660 fs/cd9660/cd9660_vnops.c optional cd9660 fs/cd9660/cd9660_iconv.c optional cd9660_iconv gnu/gcov/gcc_4_7.c optional gcov \ warning "kernel contains GPL licensed gcov support" gnu/gcov/gcov_fs.c optional gcov lindebugfs \ compile-with "${LINUXKPI_C}" gnu/gcov/gcov_subr.c optional gcov kern/bus_if.m standard kern/clock_if.m standard kern/cpufreq_if.m standard kern/device_if.m standard kern/imgact_binmisc.c optional imagact_binmisc kern/imgact_elf.c standard kern/imgact_elf32.c optional compat_freebsd32 kern/imgact_shell.c standard kern/init_main.c standard kern/init_sysent.c standard kern/ksched.c optional _kposix_priority_scheduling kern/kern_acct.c standard kern/kern_alq.c optional alq kern/kern_clock.c standard kern/kern_condvar.c standard kern/kern_conf.c standard kern/kern_cons.c standard kern/kern_cpu.c standard kern/kern_cpuset.c standard kern/kern_context.c standard kern/kern_descrip.c standard kern/kern_dtrace.c optional kdtrace_hooks kern/kern_dump.c standard kern/kern_environment.c standard kern/kern_et.c standard kern/kern_event.c standard kern/kern_exec.c standard kern/kern_exit.c standard kern/kern_fail.c standard kern/kern_ffclock.c standard kern/kern_fork.c standard kern/kern_hhook.c standard kern/kern_idle.c standard kern/kern_intr.c standard kern/kern_jail.c standard kern/kern_kcov.c optional kcov \ compile-with "${NORMAL_C:N-fsanitize*}" kern/kern_khelp.c standard kern/kern_kthread.c standard kern/kern_ktr.c optional ktr kern/kern_ktrace.c standard kern/kern_linker.c standard kern/kern_lock.c standard kern/kern_lockf.c standard kern/kern_lockstat.c optional kdtrace_hooks kern/kern_loginclass.c standard kern/kern_malloc.c standard kern/kern_mbuf.c standard kern/kern_mib.c standard kern/kern_module.c standard kern/kern_mtxpool.c standard kern/kern_mutex.c standard kern/kern_ntptime.c standard kern/kern_osd.c standard kern/kern_physio.c standard kern/kern_pmc.c standard kern/kern_poll.c optional device_polling kern/kern_priv.c standard kern/kern_proc.c standard kern/kern_procctl.c standard kern/kern_prot.c standard kern/kern_racct.c standard kern/kern_rangelock.c standard kern/kern_rctl.c standard kern/kern_resource.c standard kern/kern_rmlock.c standard kern/kern_rwlock.c standard kern/kern_sdt.c optional kdtrace_hooks kern/kern_sema.c standard kern/kern_sendfile.c standard kern/kern_sharedpage.c standard kern/kern_shutdown.c standard kern/kern_sig.c standard kern/kern_switch.c standard kern/kern_sx.c standard kern/kern_synch.c standard kern/kern_syscalls.c standard kern/kern_sysctl.c standard kern/kern_tc.c standard kern/kern_thr.c standard kern/kern_thread.c standard kern/kern_time.c standard kern/kern_timeout.c standard kern/kern_tslog.c optional tslog kern/kern_ubsan.c optional kubsan kern/kern_umtx.c standard kern/kern_uuid.c standard kern/kern_xxx.c standard kern/link_elf.c standard kern/linker_if.m standard kern/md4c.c optional netsmb kern/md5c.c standard kern/p1003_1b.c standard kern/posix4_mib.c standard kern/sched_4bsd.c optional sched_4bsd kern/sched_ule.c optional sched_ule kern/serdev_if.m standard kern/stack_protector.c standard \ compile-with "${NORMAL_C:N-fstack-protector*}" kern/subr_acl_nfs4.c optional ufs_acl | zfs kern/subr_acl_posix1e.c optional ufs_acl kern/subr_autoconf.c standard kern/subr_blist.c standard kern/subr_boot.c standard kern/subr_bus.c standard kern/subr_bus_dma.c standard kern/subr_bufring.c standard kern/subr_capability.c standard kern/subr_clock.c standard kern/subr_compressor.c standard \ compile-with "${NORMAL_C} -I$S/contrib/zstd/lib/freebsd" kern/subr_coverage.c optional coverage \ compile-with "${NORMAL_C:N-fsanitize*}" kern/subr_counter.c standard kern/subr_devstat.c standard kern/subr_disk.c standard kern/subr_early.c standard kern/subr_epoch.c standard kern/subr_eventhandler.c standard kern/subr_fattime.c standard kern/subr_firmware.c optional firmware kern/subr_gtaskqueue.c standard kern/subr_hash.c standard kern/subr_hints.c standard kern/subr_kdb.c standard kern/subr_kobj.c standard kern/subr_lock.c standard kern/subr_log.c standard kern/subr_mchain.c optional libmchain kern/subr_module.c standard kern/subr_msgbuf.c standard kern/subr_param.c standard kern/subr_pcpu.c standard kern/subr_pctrie.c standard kern/subr_pidctrl.c standard kern/subr_power.c standard kern/subr_prf.c standard kern/subr_prof.c standard kern/subr_rangeset.c standard kern/subr_rman.c standard kern/subr_rtc.c standard kern/subr_sbuf.c standard kern/subr_scanf.c standard kern/subr_sglist.c standard kern/subr_sleepqueue.c standard kern/subr_smp.c standard kern/subr_stack.c optional ddb | stack | ktr kern/subr_taskqueue.c standard kern/subr_terminal.c optional vt kern/subr_trap.c standard kern/subr_turnstile.c standard kern/subr_uio.c standard kern/subr_unit.c standard kern/subr_vmem.c standard kern/subr_witness.c optional witness kern/sys_capability.c standard kern/sys_generic.c standard kern/sys_getrandom.c standard kern/sys_pipe.c standard kern/sys_procdesc.c standard kern/sys_process.c standard kern/sys_socket.c standard kern/syscalls.c standard kern/sysv_ipc.c standard kern/sysv_msg.c optional sysvmsg kern/sysv_sem.c optional sysvsem kern/sysv_shm.c optional sysvshm kern/tty.c standard kern/tty_compat.c optional compat_43tty kern/tty_info.c standard kern/tty_inq.c standard kern/tty_outq.c standard kern/tty_pts.c standard kern/tty_tty.c standard kern/tty_ttydisc.c standard kern/uipc_accf.c standard kern/uipc_debug.c optional ddb kern/uipc_domain.c standard kern/uipc_mbuf.c standard kern/uipc_mbuf2.c standard kern/uipc_mbufhash.c standard kern/uipc_mqueue.c optional p1003_1b_mqueue kern/uipc_sem.c optional p1003_1b_semaphores kern/uipc_shm.c standard kern/uipc_sockbuf.c standard kern/uipc_socket.c standard kern/uipc_syscalls.c standard kern/uipc_usrreq.c standard kern/vfs_acl.c standard kern/vfs_aio.c standard kern/vfs_bio.c standard kern/vfs_cache.c standard kern/vfs_cluster.c standard kern/vfs_default.c standard kern/vfs_export.c standard kern/vfs_extattr.c standard kern/vfs_hash.c standard kern/vfs_init.c standard kern/vfs_lookup.c standard kern/vfs_mount.c standard kern/vfs_mountroot.c standard kern/vfs_subr.c standard kern/vfs_syscalls.c standard kern/vfs_vnops.c standard # # Kernel GSS-API # gssd.h optional kgssapi \ dependency "$S/kgssapi/gssd.x" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -hM $S/kgssapi/gssd.x | grep -v pthread.h > gssd.h" \ no-obj no-implicit-rule before-depend local \ clean "gssd.h" gssd_xdr.c optional kgssapi \ dependency "$S/kgssapi/gssd.x gssd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -c $S/kgssapi/gssd.x -o gssd_xdr.c" \ no-implicit-rule before-depend local \ clean "gssd_xdr.c" gssd_clnt.c optional kgssapi \ dependency "$S/kgssapi/gssd.x gssd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -lM $S/kgssapi/gssd.x | grep -v string.h > gssd_clnt.c" \ no-implicit-rule before-depend local \ clean "gssd_clnt.c" kgssapi/gss_accept_sec_context.c optional kgssapi kgssapi/gss_add_oid_set_member.c optional kgssapi kgssapi/gss_acquire_cred.c optional kgssapi kgssapi/gss_canonicalize_name.c optional kgssapi kgssapi/gss_create_empty_oid_set.c optional kgssapi kgssapi/gss_delete_sec_context.c optional kgssapi kgssapi/gss_display_status.c optional kgssapi kgssapi/gss_export_name.c optional kgssapi kgssapi/gss_get_mic.c optional kgssapi kgssapi/gss_init_sec_context.c optional kgssapi kgssapi/gss_impl.c optional kgssapi kgssapi/gss_import_name.c optional kgssapi kgssapi/gss_names.c optional kgssapi kgssapi/gss_pname_to_uid.c optional kgssapi kgssapi/gss_release_buffer.c optional kgssapi kgssapi/gss_release_cred.c optional kgssapi kgssapi/gss_release_name.c optional kgssapi kgssapi/gss_release_oid_set.c optional kgssapi kgssapi/gss_set_cred_option.c optional kgssapi kgssapi/gss_test_oid_set_member.c optional kgssapi kgssapi/gss_unwrap.c optional kgssapi kgssapi/gss_verify_mic.c optional kgssapi kgssapi/gss_wrap.c optional kgssapi kgssapi/gss_wrap_size_limit.c optional kgssapi kgssapi/gssd_prot.c optional kgssapi kgssapi/krb5/krb5_mech.c optional kgssapi kgssapi/krb5/kcrypto.c optional kgssapi kgssapi/krb5/kcrypto_aes.c optional kgssapi kgssapi/krb5/kcrypto_arcfour.c optional kgssapi kgssapi/krb5/kcrypto_des.c optional kgssapi kgssapi/krb5/kcrypto_des3.c optional kgssapi kgssapi/kgss_if.m optional kgssapi kgssapi/gsstest.c optional kgssapi_debug # These files in libkern/ are those needed by all architectures. Some # of the files in libkern/ are only needed on some architectures, e.g., # libkern/divdi3.c is needed by i386 but not alpha. Also, some of these # routines may be optimized for a particular platform. In either case, # the file should be moved to conf/files. from here. # libkern/arc4random.c standard crypto/chacha20/chacha.c standard libkern/asprintf.c standard libkern/bcd.c standard libkern/bsearch.c standard libkern/explicit_bzero.c standard libkern/fnmatch.c standard libkern/gsb_crc32.c standard libkern/iconv.c optional libiconv libkern/iconv_converter_if.m optional libiconv libkern/iconv_ucs.c optional libiconv libkern/iconv_xlat.c optional libiconv libkern/iconv_xlat16.c optional libiconv libkern/inet_aton.c standard libkern/inet_ntoa.c standard libkern/inet_ntop.c standard libkern/inet_pton.c standard libkern/jenkins_hash.c standard libkern/murmur3_32.c standard libkern/mcount.c optional profiling-routine libkern/memcchr.c standard libkern/memchr.c standard libkern/memmem.c optional gdb libkern/qsort.c standard libkern/qsort_r.c standard libkern/random.c standard libkern/scanc.c standard libkern/strcasecmp.c standard libkern/strcat.c standard libkern/strchr.c standard libkern/strcmp.c standard libkern/strcpy.c standard libkern/strcspn.c standard libkern/strdup.c standard libkern/strndup.c standard libkern/strlcat.c standard libkern/strlcpy.c standard libkern/strlen.c standard libkern/strncat.c standard libkern/strncmp.c standard libkern/strncpy.c standard libkern/strnlen.c standard libkern/strrchr.c standard libkern/strsep.c standard libkern/strspn.c standard libkern/strstr.c standard libkern/strtol.c standard libkern/strtoq.c standard libkern/strtoul.c standard libkern/strtouq.c standard libkern/strvalid.c standard libkern/timingsafe_bcmp.c standard libkern/zlib.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | netgraph_deflate | ddb_ctf | gzio +contrib/zlib/adler32.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/crc32.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C} -Wno-cast-qual" +contrib/zlib/deflate.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C} -Wno-cast-qual" +contrib/zlib/inffast.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/inflate.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/inftrees.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/trees.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/zutil.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +dev/zlib/zlib_mod.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +dev/zlib/zcalloc.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" net/altq/altq_cbq.c optional altq net/altq/altq_codel.c optional altq net/altq/altq_hfsc.c optional altq net/altq/altq_fairq.c optional altq net/altq/altq_priq.c optional altq net/altq/altq_red.c optional altq net/altq/altq_rio.c optional altq net/altq/altq_rmclass.c optional altq net/altq/altq_subr.c optional altq net/bpf.c standard net/bpf_buffer.c optional bpf net/bpf_jitter.c optional bpf_jitter net/bpf_filter.c optional bpf | netgraph_bpf net/bpf_zerocopy.c optional bpf net/bridgestp.c optional bridge | if_bridge net/flowtable.c optional flowtable inet | flowtable inet6 net/ieee8023ad_lacp.c optional lagg net/if.c standard net/if_bridge.c optional bridge inet | if_bridge inet net/if_clone.c standard net/if_dead.c standard net/if_debug.c optional ddb net/if_disc.c optional disc net/if_edsc.c optional edsc net/if_enc.c optional enc inet | enc inet6 net/if_epair.c optional epair net/if_ethersubr.c optional ether net/if_fwsubr.c optional fwip net/if_gif.c optional gif inet | gif inet6 | \ netgraph_gif inet | netgraph_gif inet6 net/if_gre.c optional gre inet | gre inet6 net/if_ipsec.c optional inet ipsec | inet6 ipsec net/if_lagg.c optional lagg net/if_loop.c optional loop net/if_llatbl.c standard net/if_me.c optional me inet net/if_media.c standard net/if_mib.c standard net/if_spppfr.c optional sppp | netgraph_sppp net/if_spppsubr.c optional sppp | netgraph_sppp net/if_stf.c optional stf inet inet6 net/if_tuntap.c optional tuntap net/if_vlan.c optional vlan net/if_vxlan.c optional vxlan inet | vxlan inet6 net/ifdi_if.m optional ether pci iflib net/iflib.c optional ether pci iflib net/iflib_clone.c optional ether pci iflib net/mp_ring.c optional ether iflib net/mppcc.c optional netgraph_mppc_compression net/mppcd.c optional netgraph_mppc_compression net/netisr.c standard net/pfil.c optional ether | inet net/radix.c standard net/radix_mpath.c standard net/raw_cb.c standard net/raw_usrreq.c standard net/route.c standard net/rss_config.c optional inet rss | inet6 rss net/rtsock.c standard net/slcompress.c optional netgraph_vjc | sppp | \ netgraph_sppp net/toeplitz.c optional inet rss | inet6 rss net/vnet.c optional vimage net80211/ieee80211.c optional wlan net80211/ieee80211_acl.c optional wlan wlan_acl net80211/ieee80211_action.c optional wlan net80211/ieee80211_adhoc.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_ageq.c optional wlan net80211/ieee80211_amrr.c optional wlan | wlan_amrr net80211/ieee80211_crypto.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_crypto_ccmp.c optional wlan wlan_ccmp net80211/ieee80211_crypto_none.c optional wlan net80211/ieee80211_crypto_tkip.c optional wlan wlan_tkip net80211/ieee80211_crypto_wep.c optional wlan wlan_wep net80211/ieee80211_ddb.c optional wlan ddb net80211/ieee80211_dfs.c optional wlan net80211/ieee80211_freebsd.c optional wlan net80211/ieee80211_hostap.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_ht.c optional wlan net80211/ieee80211_hwmp.c optional wlan ieee80211_support_mesh net80211/ieee80211_input.c optional wlan net80211/ieee80211_ioctl.c optional wlan net80211/ieee80211_mesh.c optional wlan ieee80211_support_mesh \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_monitor.c optional wlan net80211/ieee80211_node.c optional wlan net80211/ieee80211_output.c optional wlan net80211/ieee80211_phy.c optional wlan net80211/ieee80211_power.c optional wlan net80211/ieee80211_proto.c optional wlan net80211/ieee80211_radiotap.c optional wlan net80211/ieee80211_ratectl.c optional wlan net80211/ieee80211_ratectl_none.c optional wlan net80211/ieee80211_regdomain.c optional wlan net80211/ieee80211_rssadapt.c optional wlan wlan_rssadapt net80211/ieee80211_scan.c optional wlan net80211/ieee80211_scan_sta.c optional wlan net80211/ieee80211_sta.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_superg.c optional wlan ieee80211_support_superg net80211/ieee80211_scan_sw.c optional wlan net80211/ieee80211_tdma.c optional wlan ieee80211_support_tdma net80211/ieee80211_vht.c optional wlan net80211/ieee80211_wds.c optional wlan net80211/ieee80211_xauth.c optional wlan wlan_xauth net80211/ieee80211_alq.c optional wlan ieee80211_alq netgraph/atm/ccatm/ng_ccatm.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/ngatmbase.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscfu/ng_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscop/ng_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/uni/ng_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/bluetooth/common/ng_bluetooth.c optional netgraph_bluetooth netgraph/bluetooth/drivers/bt3c/ng_bt3c_pccard.c optional netgraph_bluetooth_bt3c netgraph/bluetooth/drivers/h4/ng_h4.c optional netgraph_bluetooth_h4 netgraph/bluetooth/drivers/ubt/ng_ubt.c optional netgraph_bluetooth_ubt usb netgraph/bluetooth/drivers/ubtbcmfw/ubtbcmfw.c optional netgraph_bluetooth_ubtbcmfw usb netgraph/bluetooth/hci/ng_hci_cmds.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_evnt.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_main.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_misc.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_ulpi.c optional netgraph_bluetooth_hci netgraph/bluetooth/l2cap/ng_l2cap_cmds.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_evnt.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_llpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_main.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_misc.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_ulpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/socket/ng_btsocket.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_hci_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_rfcomm.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_sco.c optional netgraph_bluetooth_socket netgraph/netflow/netflow.c optional netgraph_netflow netgraph/netflow/netflow_v9.c optional netgraph_netflow netgraph/netflow/ng_netflow.c optional netgraph_netflow netgraph/ng_UI.c optional netgraph_UI netgraph/ng_async.c optional netgraph_async netgraph/ng_atmllc.c optional netgraph_atmllc netgraph/ng_base.c optional netgraph netgraph/ng_bpf.c optional netgraph_bpf netgraph/ng_bridge.c optional netgraph_bridge netgraph/ng_car.c optional netgraph_car netgraph/ng_checksum.c optional netgraph_checksum netgraph/ng_cisco.c optional netgraph_cisco netgraph/ng_deflate.c optional netgraph_deflate netgraph/ng_device.c optional netgraph_device netgraph/ng_echo.c optional netgraph_echo netgraph/ng_eiface.c optional netgraph_eiface netgraph/ng_ether.c optional netgraph_ether netgraph/ng_ether_echo.c optional netgraph_ether_echo netgraph/ng_frame_relay.c optional netgraph_frame_relay netgraph/ng_gif.c optional netgraph_gif inet6 | netgraph_gif inet netgraph/ng_gif_demux.c optional netgraph_gif_demux netgraph/ng_hole.c optional netgraph_hole netgraph/ng_iface.c optional netgraph_iface netgraph/ng_ip_input.c optional netgraph_ip_input netgraph/ng_ipfw.c optional netgraph_ipfw inet ipfirewall netgraph/ng_ksocket.c optional netgraph_ksocket netgraph/ng_l2tp.c optional netgraph_l2tp netgraph/ng_lmi.c optional netgraph_lmi netgraph/ng_mppc.c optional netgraph_mppc_compression | \ netgraph_mppc_encryption netgraph/ng_nat.c optional netgraph_nat inet libalias netgraph/ng_one2many.c optional netgraph_one2many netgraph/ng_parse.c optional netgraph netgraph/ng_patch.c optional netgraph_patch netgraph/ng_pipe.c optional netgraph_pipe netgraph/ng_ppp.c optional netgraph_ppp netgraph/ng_pppoe.c optional netgraph_pppoe netgraph/ng_pptpgre.c optional netgraph_pptpgre netgraph/ng_pred1.c optional netgraph_pred1 netgraph/ng_rfc1490.c optional netgraph_rfc1490 netgraph/ng_socket.c optional netgraph_socket netgraph/ng_split.c optional netgraph_split netgraph/ng_sppp.c optional netgraph_sppp netgraph/ng_tag.c optional netgraph_tag netgraph/ng_tcpmss.c optional netgraph_tcpmss netgraph/ng_tee.c optional netgraph_tee netgraph/ng_tty.c optional netgraph_tty netgraph/ng_vjc.c optional netgraph_vjc netgraph/ng_vlan.c optional netgraph_vlan netinet/accf_data.c optional accept_filter_data inet netinet/accf_dns.c optional accept_filter_dns inet netinet/accf_http.c optional accept_filter_http inet netinet/if_ether.c optional inet ether netinet/igmp.c optional inet netinet/in.c optional inet netinet/in_debug.c optional inet ddb netinet/in_kdtrace.c optional inet | inet6 netinet/ip_carp.c optional inet carp | inet6 carp netinet/in_fib.c optional inet netinet/in_gif.c optional gif inet | netgraph_gif inet netinet/ip_gre.c optional gre inet netinet/ip_id.c optional inet netinet/in_jail.c optional inet netinet/in_mcast.c optional inet netinet/in_pcb.c optional inet | inet6 netinet/in_pcbgroup.c optional inet pcbgroup | inet6 pcbgroup netinet/in_prot.c optional inet | inet6 netinet/in_proto.c optional inet | inet6 netinet/in_rmx.c optional inet netinet/in_rss.c optional inet rss netinet/ip_divert.c optional inet ipdivert ipfirewall netinet/ip_ecn.c optional inet | inet6 netinet/ip_encap.c optional inet | inet6 netinet/ip_fastfwd.c optional inet netinet/ip_icmp.c optional inet | inet6 netinet/ip_input.c optional inet netinet/ip_mroute.c optional mrouting inet netinet/ip_options.c optional inet netinet/ip_output.c optional inet netinet/ip_reass.c optional inet netinet/raw_ip.c optional inet | inet6 netinet/cc/cc.c optional inet | inet6 netinet/cc/cc_newreno.c optional inet | inet6 netinet/sctp_asconf.c optional inet sctp | inet6 sctp netinet/sctp_auth.c optional inet sctp | inet6 sctp netinet/sctp_bsd_addr.c optional inet sctp | inet6 sctp netinet/sctp_cc_functions.c optional inet sctp | inet6 sctp netinet/sctp_crc32.c optional inet | inet6 netinet/sctp_indata.c optional inet sctp | inet6 sctp netinet/sctp_input.c optional inet sctp | inet6 sctp netinet/sctp_output.c optional inet sctp | inet6 sctp netinet/sctp_pcb.c optional inet sctp | inet6 sctp netinet/sctp_peeloff.c optional inet sctp | inet6 sctp netinet/sctp_ss_functions.c optional inet sctp | inet6 sctp netinet/sctp_syscalls.c optional inet sctp | inet6 sctp netinet/sctp_sysctl.c optional inet sctp | inet6 sctp netinet/sctp_timer.c optional inet sctp | inet6 sctp netinet/sctp_usrreq.c optional inet sctp | inet6 sctp netinet/sctputil.c optional inet sctp | inet6 sctp netinet/siftr.c optional inet siftr alq | inet6 siftr alq netinet/tcp_debug.c optional tcpdebug netinet/tcp_fastopen.c optional inet tcp_rfc7413 | inet6 tcp_rfc7413 netinet/tcp_hostcache.c optional inet | inet6 netinet/tcp_input.c optional inet | inet6 netinet/tcp_log_buf.c optional tcp_blackbox inet | tcp_blackbox inet6 netinet/tcp_lro.c optional inet | inet6 netinet/tcp_output.c optional inet | inet6 netinet/tcp_offload.c optional tcp_offload inet | tcp_offload inet6 netinet/tcp_hpts.c optional tcphpts inet | tcphpts inet6 netinet/tcp_pcap.c optional inet tcppcap | inet6 tcppcap \ compile-with "${NORMAL_C} ${NO_WNONNULL}" netinet/tcp_reass.c optional inet | inet6 netinet/tcp_sack.c optional inet | inet6 netinet/tcp_subr.c optional inet | inet6 netinet/tcp_syncache.c optional inet | inet6 netinet/tcp_timer.c optional inet | inet6 netinet/tcp_timewait.c optional inet | inet6 netinet/tcp_usrreq.c optional inet | inet6 netinet/udp_usrreq.c optional inet | inet6 netinet/libalias/alias.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_db.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_mod.c optional libalias | netgraph_nat netinet/libalias/alias_proxy.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_util.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_sctp.c optional libalias inet | netgraph_nat inet netinet/netdump/netdump_client.c optional inet netdump netinet6/dest6.c optional inet6 netinet6/frag6.c optional inet6 netinet6/icmp6.c optional inet6 netinet6/in6.c optional inet6 netinet6/in6_cksum.c optional inet6 netinet6/in6_fib.c optional inet6 netinet6/in6_gif.c optional gif inet6 | netgraph_gif inet6 netinet6/in6_ifattach.c optional inet6 netinet6/in6_jail.c optional inet6 netinet6/in6_mcast.c optional inet6 netinet6/in6_pcb.c optional inet6 netinet6/in6_pcbgroup.c optional inet6 pcbgroup netinet6/in6_proto.c optional inet6 netinet6/in6_rmx.c optional inet6 netinet6/in6_rss.c optional inet6 rss netinet6/in6_src.c optional inet6 netinet6/ip6_fastfwd.c optional inet6 netinet6/ip6_forward.c optional inet6 netinet6/ip6_gre.c optional gre inet6 netinet6/ip6_id.c optional inet6 netinet6/ip6_input.c optional inet6 netinet6/ip6_mroute.c optional mrouting inet6 netinet6/ip6_output.c optional inet6 netinet6/mld6.c optional inet6 netinet6/nd6.c optional inet6 netinet6/nd6_nbr.c optional inet6 netinet6/nd6_rtr.c optional inet6 netinet6/raw_ip6.c optional inet6 netinet6/route6.c optional inet6 netinet6/scope6.c optional inet6 netinet6/sctp6_usrreq.c optional inet6 sctp netinet6/udp6_usrreq.c optional inet6 netipsec/ipsec.c optional ipsec inet | ipsec inet6 netipsec/ipsec_input.c optional ipsec inet | ipsec inet6 netipsec/ipsec_mbuf.c optional ipsec inet | ipsec inet6 netipsec/ipsec_mod.c optional ipsec inet | ipsec inet6 netipsec/ipsec_output.c optional ipsec inet | ipsec inet6 netipsec/ipsec_pcb.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/key.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/key_debug.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/keysock.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/subr_ipsec.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/udpencap.c optional ipsec inet netipsec/xform_ah.c optional ipsec inet | ipsec inet6 netipsec/xform_esp.c optional ipsec inet | ipsec inet6 netipsec/xform_ipcomp.c optional ipsec inet | ipsec inet6 netipsec/xform_tcp.c optional ipsec inet tcp_signature | \ ipsec inet6 tcp_signature | ipsec_support inet tcp_signature | \ ipsec_support inet6 tcp_signature netpfil/ipfw/dn_aqm_codel.c optional inet dummynet netpfil/ipfw/dn_aqm_pie.c optional inet dummynet netpfil/ipfw/dn_heap.c optional inet dummynet netpfil/ipfw/dn_sched_fifo.c optional inet dummynet netpfil/ipfw/dn_sched_fq_codel.c optional inet dummynet netpfil/ipfw/dn_sched_fq_pie.c optional inet dummynet netpfil/ipfw/dn_sched_prio.c optional inet dummynet netpfil/ipfw/dn_sched_qfq.c optional inet dummynet netpfil/ipfw/dn_sched_rr.c optional inet dummynet netpfil/ipfw/dn_sched_wf2q.c optional inet dummynet netpfil/ipfw/ip_dummynet.c optional inet dummynet netpfil/ipfw/ip_dn_io.c optional inet dummynet netpfil/ipfw/ip_dn_glue.c optional inet dummynet netpfil/ipfw/ip_fw2.c optional inet ipfirewall netpfil/ipfw/ip_fw_bpf.c optional inet ipfirewall netpfil/ipfw/ip_fw_dynamic.c optional inet ipfirewall \ compile-with "${NORMAL_C} -I$S/contrib/ck/include" netpfil/ipfw/ip_fw_eaction.c optional inet ipfirewall netpfil/ipfw/ip_fw_log.c optional inet ipfirewall netpfil/ipfw/ip_fw_pfil.c optional inet ipfirewall netpfil/ipfw/ip_fw_sockopt.c optional inet ipfirewall netpfil/ipfw/ip_fw_table.c optional inet ipfirewall netpfil/ipfw/ip_fw_table_algo.c optional inet ipfirewall netpfil/ipfw/ip_fw_table_value.c optional inet ipfirewall netpfil/ipfw/ip_fw_iface.c optional inet ipfirewall netpfil/ipfw/ip_fw_nat.c optional inet ipfirewall_nat netpfil/ipfw/nat64/ip_fw_nat64.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64clat.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64clat_control.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64lsn.c optional inet inet6 ipfirewall \ ipfirewall_nat64 compile-with "${NORMAL_C} -I$S/contrib/ck/include" netpfil/ipfw/nat64/nat64lsn_control.c optional inet inet6 ipfirewall \ ipfirewall_nat64 compile-with "${NORMAL_C} -I$S/contrib/ck/include" netpfil/ipfw/nat64/nat64stl.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64stl_control.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64_translate.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nptv6/ip_fw_nptv6.c optional inet inet6 ipfirewall \ ipfirewall_nptv6 netpfil/ipfw/nptv6/nptv6.c optional inet inet6 ipfirewall \ ipfirewall_nptv6 netpfil/ipfw/pmod/ip_fw_pmod.c optional inet ipfirewall_pmod netpfil/ipfw/pmod/tcpmod.c optional inet ipfirewall_pmod netpfil/pf/if_pflog.c optional pflog pf inet netpfil/pf/if_pfsync.c optional pfsync pf inet netpfil/pf/pf.c optional pf inet netpfil/pf/pf_if.c optional pf inet netpfil/pf/pf_ioctl.c optional pf inet netpfil/pf/pf_lb.c optional pf inet netpfil/pf/pf_norm.c optional pf inet netpfil/pf/pf_osfp.c optional pf inet netpfil/pf/pf_ruleset.c optional pf inet netpfil/pf/pf_table.c optional pf inet netpfil/pf/in4_cksum.c optional pf inet netsmb/smb_conn.c optional netsmb netsmb/smb_crypt.c optional netsmb netsmb/smb_dev.c optional netsmb netsmb/smb_iod.c optional netsmb netsmb/smb_rq.c optional netsmb netsmb/smb_smb.c optional netsmb netsmb/smb_subr.c optional netsmb netsmb/smb_trantcp.c optional netsmb netsmb/smb_usr.c optional netsmb nfs/bootp_subr.c optional bootp nfscl nfs/krpc_subr.c optional bootp nfscl nfs/nfs_diskless.c optional nfscl nfs_root nfs/nfs_fha.c optional nfsd nfs/nfs_lock.c optional nfscl | nfslockd | nfsd nfs/nfs_nfssvc.c optional nfscl | nfsd nlm/nlm_advlock.c optional nfslockd | nfsd nlm/nlm_prot_clnt.c optional nfslockd | nfsd nlm/nlm_prot_impl.c optional nfslockd | nfsd nlm/nlm_prot_server.c optional nfslockd | nfsd nlm/nlm_prot_svc.c optional nfslockd | nfsd nlm/nlm_prot_xdr.c optional nfslockd | nfsd nlm/sm_inter_xdr.c optional nfslockd | nfsd # Linux Kernel Programming Interface compat/linuxkpi/common/src/linux_kmod.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_compat.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_current.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_hrtimer.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_kthread.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_lock.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_page.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_pci.c optional compat_linuxkpi pci \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_tasklet.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_idr.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_radix.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_rcu.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C} -I$S/contrib/ck/include" compat/linuxkpi/common/src/linux_schedule.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_slab.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_usb.c optional compat_linuxkpi usb \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_work.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_seq_file.c optional compat_linuxkpi | lindebugfs \ compile-with "${LINUXKPI_C}" compat/lindebugfs/lindebugfs.c optional lindebugfs \ compile-with "${LINUXKPI_C}" # OpenFabrics Enterprise Distribution (Infiniband) ofed/drivers/infiniband/core/ib_addr.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_agent.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cache.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cma.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cq.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_device.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_fmr_pool.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwcm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwpm_msg.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwpm_util.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_mad.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_mad_rmpp.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_multicast.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_packer.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_roce_gid_mgmt.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_sa_query.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_smi.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_sysfs.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ucm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ucma.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ud_header.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_umem.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_user_mad.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_cmd.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_main.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_marshall.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_verbs.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/ulp/ipoib/ipoib_cm.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" #ofed/drivers/infiniband/ulp/ipoib/ipoib_fs.c optional ipoib \ # compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_ib.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_main.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_multicast.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_verbs.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" #ofed/drivers/infiniband/ulp/ipoib/ipoib_vlan.c optional ipoib \ # compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/sdp/sdp_bcopy.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_main.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_rx.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_cma.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_tx.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" dev/mthca/mthca_allocator.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_av.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_catas.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_cmd.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_cq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_eq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mad.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_main.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mcg.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_memfree.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mr.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_pd.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_profile.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_provider.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_qp.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_reset.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_srq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_uar.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_alias_GUID.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mcg.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_sysfs.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_cm.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_ah.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_cq.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_doorbell.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mad.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_main.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mr.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_qp.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_srq.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_wc.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_alloc.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_catas.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_cmd.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_cq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_eq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_fw.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_fw_qos.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_icm.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_intf.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_main.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_mcg.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_mr.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_pd.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_port.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_profile.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_qp.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_reset.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_sense.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_srq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_resource_tracker.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_cq.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_main.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_netdev.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_port.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_resources.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_rx.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_tx.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_ah.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_cong.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_cq.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_doorbell.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_gsi.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mad.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_main.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mem.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mr.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_qp.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_srq.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_virt.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_alloc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_cmd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_cq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_diagnostics.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_eq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fs_cmd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fs_tree.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fw.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fwdump.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fwdump_regmaps.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_health.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mad.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_main.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mcg.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mr.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_pagealloc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_pd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_port.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_qp.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_rl.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_srq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_transobj.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_uar.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_vport.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_vsc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_wq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_lib/mlx5_gid.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_dim.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_ethtool.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_main.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_tx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_flow_table.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_rx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_rl.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_txrx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" # crypto support opencrypto/cast.c optional crypto | ipsec | ipsec_support opencrypto/criov.c optional crypto | ipsec | ipsec_support opencrypto/crypto.c optional crypto | ipsec | ipsec_support opencrypto/cryptodev.c optional cryptodev opencrypto/cryptodev_if.m optional crypto | ipsec | ipsec_support opencrypto/cryptosoft.c optional crypto | ipsec | ipsec_support -opencrypto/cryptodeflate.c optional crypto | ipsec | ipsec_support +opencrypto/cryptodeflate.c optional crypto | ipsec | ipsec_support \ + compile-with "${ZLIB_C}" opencrypto/gmac.c optional crypto | ipsec | ipsec_support opencrypto/gfmult.c optional crypto | ipsec | ipsec_support opencrypto/rmd160.c optional crypto | ipsec | ipsec_support opencrypto/skipjack.c optional crypto | ipsec | ipsec_support opencrypto/xform.c optional crypto | ipsec | ipsec_support opencrypto/xform_poly1305.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_onetimeauth/poly1305/onetimeauth_poly1305.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_onetimeauth/poly1305/donna/poly1305_donna.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_verify/sodium/verify.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" crypto/libsodium/randombytes.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" crypto/libsodium/utils.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" opencrypto/cbc_mac.c optional crypto opencrypto/xform_cbc_mac.c optional crypto rpc/auth_none.c optional krpc | nfslockd | nfscl | nfsd rpc/auth_unix.c optional krpc | nfslockd | nfscl | nfsd rpc/authunix_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_bck.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_dg.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_rc.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_vc.c optional krpc | nfslockd | nfscl | nfsd rpc/getnetconfig.c optional krpc | nfslockd | nfscl | nfsd rpc/replay.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_callmsg.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_generic.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcb_clnt.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcb_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/svc.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_auth.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_auth_unix.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_dg.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_generic.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_vc.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcsec_gss/rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_conf.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_misc.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_prot.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/svc_rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi security/audit/audit.c optional audit security/audit/audit_arg.c optional audit security/audit/audit_bsm.c optional audit security/audit/audit_bsm_db.c optional audit security/audit/audit_bsm_klib.c optional audit security/audit/audit_dtrace.c optional dtaudit audit | dtraceall audit compile-with "${CDDL_C}" security/audit/audit_pipe.c optional audit security/audit/audit_syscalls.c standard security/audit/audit_trigger.c optional audit security/audit/audit_worker.c optional audit security/audit/bsm_domain.c optional audit security/audit/bsm_errno.c optional audit security/audit/bsm_fcntl.c optional audit security/audit/bsm_socket_type.c optional audit security/audit/bsm_token.c optional audit security/mac/mac_audit.c optional mac audit security/mac/mac_cred.c optional mac security/mac/mac_framework.c optional mac security/mac/mac_inet.c optional mac inet | mac inet6 security/mac/mac_inet6.c optional mac inet6 security/mac/mac_label.c optional mac security/mac/mac_net.c optional mac security/mac/mac_pipe.c optional mac security/mac/mac_posix_sem.c optional mac security/mac/mac_posix_shm.c optional mac security/mac/mac_priv.c optional mac security/mac/mac_process.c optional mac security/mac/mac_socket.c optional mac security/mac/mac_syscalls.c standard security/mac/mac_system.c optional mac security/mac/mac_sysv_msg.c optional mac security/mac/mac_sysv_sem.c optional mac security/mac/mac_sysv_shm.c optional mac security/mac/mac_vfs.c optional mac security/mac_biba/mac_biba.c optional mac_biba security/mac_bsdextended/mac_bsdextended.c optional mac_bsdextended security/mac_bsdextended/ugidfw_system.c optional mac_bsdextended security/mac_bsdextended/ugidfw_vnode.c optional mac_bsdextended security/mac_ifoff/mac_ifoff.c optional mac_ifoff security/mac_lomac/mac_lomac.c optional mac_lomac security/mac_mls/mac_mls.c optional mac_mls security/mac_none/mac_none.c optional mac_none security/mac_ntpd/mac_ntpd.c optional mac_ntpd security/mac_partition/mac_partition.c optional mac_partition security/mac_portacl/mac_portacl.c optional mac_portacl security/mac_seeotheruids/mac_seeotheruids.c optional mac_seeotheruids security/mac_stub/mac_stub.c optional mac_stub security/mac_test/mac_test.c optional mac_test security/mac_veriexec/mac_veriexec.c optional mac_veriexec security/mac_veriexec/veriexec_fingerprint.c optional mac_veriexec security/mac_veriexec/veriexec_metadata.c optional mac_veriexec security/mac_veriexec_parser/mac_veriexec_parser.c optional mac_veriexec mac_veriexec_parser security/mac_veriexec/mac_veriexec_rmd160.c optional mac_veriexec_rmd160 security/mac_veriexec/mac_veriexec_sha1.c optional mac_veriexec_sha1 security/mac_veriexec/mac_veriexec_sha256.c optional mac_veriexec_sha256 security/mac_veriexec/mac_veriexec_sha384.c optional mac_veriexec_sha384 security/mac_veriexec/mac_veriexec_sha512.c optional mac_veriexec_sha512 teken/teken.c optional sc !SC_NO_TERM_TEKEN | vt ufs/ffs/ffs_alloc.c optional ffs ufs/ffs/ffs_balloc.c optional ffs ufs/ffs/ffs_inode.c optional ffs ufs/ffs/ffs_snapshot.c optional ffs ufs/ffs/ffs_softdep.c optional ffs ufs/ffs/ffs_subr.c optional ffs | geom_label ufs/ffs/ffs_tables.c optional ffs | geom_label ufs/ffs/ffs_vfsops.c optional ffs ufs/ffs/ffs_vnops.c optional ffs ufs/ffs/ffs_rawread.c optional ffs directio ufs/ffs/ffs_suspend.c optional ffs ufs/ufs/ufs_acl.c optional ffs ufs/ufs/ufs_bmap.c optional ffs ufs/ufs/ufs_dirhash.c optional ffs ufs/ufs/ufs_extattr.c optional ffs ufs/ufs/ufs_gjournal.c optional ffs UFS_GJOURNAL ufs/ufs/ufs_inode.c optional ffs ufs/ufs/ufs_lookup.c optional ffs ufs/ufs/ufs_quota.c optional ffs ufs/ufs/ufs_vfsops.c optional ffs ufs/ufs/ufs_vnops.c optional ffs vm/default_pager.c standard vm/device_pager.c standard vm/phys_pager.c standard vm/redzone.c optional DEBUG_REDZONE vm/sg_pager.c standard vm/swap_pager.c standard vm/uma_core.c standard vm/uma_dbg.c standard vm/memguard.c optional DEBUG_MEMGUARD vm/vm_domainset.c standard vm/vm_fault.c standard vm/vm_glue.c standard vm/vm_init.c standard vm/vm_kern.c standard vm/vm_map.c standard vm/vm_meter.c standard vm/vm_mmap.c standard vm/vm_object.c standard vm/vm_page.c standard vm/vm_pageout.c standard vm/vm_pager.c standard vm/vm_phys.c standard vm/vm_radix.c standard vm/vm_reserv.c standard vm/vm_swapout.c optional !NO_SWAPPING vm/vm_swapout_dummy.c optional NO_SWAPPING vm/vm_unix.c standard vm/vnode_pager.c standard xen/features.c optional xenhvm xen/xenbus/xenbus_if.m optional xenhvm xen/xenbus/xenbus.c optional xenhvm xen/xenbus/xenbusb_if.m optional xenhvm xen/xenbus/xenbusb.c optional xenhvm xen/xenbus/xenbusb_front.c optional xenhvm xen/xenbus/xenbusb_back.c optional xenhvm xen/xenmem/xenmem_if.m optional xenhvm xdr/xdr.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_array.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_mbuf.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_mem.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_reference.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_sizeof.c optional krpc | nfslockd | nfscl | nfsd Index: head/sys/conf/kern.pre.mk =================================================================== --- head/sys/conf/kern.pre.mk (revision 350495) +++ head/sys/conf/kern.pre.mk (revision 350496) @@ -1,320 +1,324 @@ # $FreeBSD$ # Part of a unified Makefile for building kernels. This part contains all # of the definitions that need to be before %BEFORE_DEPEND. # Allow user to configure things that only effect src tree builds. # Note: This is duplicated from src.sys.mk to ensure that we include # /etc/src.conf when building the kernel. Kernels can be built without # the rest of /usr/src, but they still always process SRCCONF even though # the normal mechanisms to prevent that (compiling out of tree) won't # work. To ensure they do work, we have to duplicate thee few lines here. SRCCONF?= /etc/src.conf .if (exists(${SRCCONF}) || ${SRCCONF} != "/etc/src.conf") && !target(_srcconf_included_) .include "${SRCCONF}" _srcconf_included_: .endif .include .include .include "kern.opts.mk" # The kernel build always occurs in the object directory which is .CURDIR. .if ${.MAKE.MODE:Unormal:Mmeta} .MAKE.MODE+= curdirOk=yes .endif # The kernel build always expects .OBJDIR=.CURDIR. .OBJDIR: ${.CURDIR} .if defined(NO_OBJWALK) || ${MK_AUTO_OBJ} == "yes" NO_OBJWALK= t NO_MODULES_OBJ= t .endif .if !defined(NO_OBJWALK) _obj= obj .endif # Can be overridden by makeoptions or /etc/make.conf KERNEL_KO?= kernel KERNEL?= kernel KODIR?= /boot/${KERNEL} LDSCRIPT_NAME?= ldscript.$M LDSCRIPT?= $S/conf/${LDSCRIPT_NAME} M= ${MACHINE} AWK?= awk CP?= cp NM?= nm OBJCOPY?= objcopy SIZE?= size .if defined(DEBUG) _MINUS_O= -O CTFFLAGS+= -g .else .if ${MACHINE_CPUARCH} == "powerpc" _MINUS_O= -O # gcc miscompiles some code at -O2 .else _MINUS_O= -O2 .endif .endif .if ${MACHINE_CPUARCH} == "amd64" .if ${COMPILER_TYPE} == "clang" COPTFLAGS?=-O2 -pipe .else COPTFLAGS?=-O2 -frename-registers -pipe .endif .else COPTFLAGS?=${_MINUS_O} -pipe .endif .if !empty(COPTFLAGS:M-O[23s]) && empty(COPTFLAGS:M-fno-strict-aliasing) COPTFLAGS+= -fno-strict-aliasing .endif .if !defined(NO_CPU_COPTFLAGS) COPTFLAGS+= ${_CPUCFLAGS} .endif NOSTDINC= -nostdinc INCLUDES= ${NOSTDINC} ${INCLMAGIC} -I. -I$S -I$S/contrib/ck/include CFLAGS= ${COPTFLAGS} ${DEBUG} CFLAGS+= ${INCLUDES} -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h CFLAGS_PARAM_INLINE_UNIT_GROWTH?=100 CFLAGS_PARAM_LARGE_FUNCTION_GROWTH?=1000 .if ${MACHINE_CPUARCH} == "mips" CFLAGS_ARCH_PARAMS?=--param max-inline-insns-single=1000 -DMACHINE_ARCH='"${MACHINE_ARCH}"' .endif CFLAGS.gcc+= -fno-common -fms-extensions -finline-limit=${INLINE_LIMIT} CFLAGS.gcc+= --param inline-unit-growth=${CFLAGS_PARAM_INLINE_UNIT_GROWTH} CFLAGS.gcc+= --param large-function-growth=${CFLAGS_PARAM_LARGE_FUNCTION_GROWTH} CFLAGS.gcc+= -fms-extensions .if defined(CFLAGS_ARCH_PARAMS) CFLAGS.gcc+=${CFLAGS_ARCH_PARAMS} .endif WERROR?= -Werror # XXX LOCORE means "don't declare C stuff" not "for locore.s". ASM_CFLAGS= -x assembler-with-cpp -DLOCORE ${CFLAGS} ${ASM_CFLAGS.${.IMPSRC:T}} .if defined(PROFLEVEL) && ${PROFLEVEL} >= 1 CFLAGS+= -DGPROF CFLAGS.gcc+= -falign-functions=16 .if ${PROFLEVEL} >= 2 CFLAGS+= -DGPROF4 -DGUPROF PROF= -pg .if ${COMPILER_TYPE} == "gcc" PROF+= -mprofiler-epilogue .endif .else PROF= -pg .endif .endif DEFINED_PROF= ${PROF} KUBSAN_ENABLED!= grep KUBSAN opt_global.h || true ; echo .if !empty(KUBSAN_ENABLED) SAN_CFLAGS+= -fsanitize=undefined .endif COVERAGE_ENABLED!= grep COVERAGE opt_global.h || true ; echo .if !empty(COVERAGE_ENABLED) .if ${COMPILER_TYPE} == "clang" || \ (${COMPILER_TYPE} == "gcc" && ${COMPILER_VERSION} >= 80100) SAN_CFLAGS+= -fsanitize-coverage=trace-pc,trace-cmp .else SAN_CFLAGS+= -fsanitize-coverage=trace-pc .endif .endif CFLAGS+= ${SAN_CFLAGS} GCOV_ENABLED!= grep GCOV opt_global.h || true ; echo .if !empty(GCOV_ENABLED) .if ${COMPILER_TYPE} == "gcc" GCOV_CFLAGS+= -fprofile-arcs -ftest-coverage .endif .endif CFLAGS+= ${GCOV_CFLAGS} # Put configuration-specific C flags last (except for ${PROF}) so that they # can override the others. CFLAGS+= ${CONF_CFLAGS} .if defined(LINKER_FEATURES) && ${LINKER_FEATURES:Mbuild-id} LDFLAGS+= --build-id=sha1 .endif .if (${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" || \ ${MACHINE_CPUARCH} == "i386") && \ defined(LINKER_FEATURES) && ${LINKER_FEATURES:Mifunc} == "" .error amd64/arm64/i386 kernel requires linker ifunc support .endif .if ${MACHINE_CPUARCH} == "amd64" LDFLAGS+= -z max-page-size=2097152 .if ${LINKER_TYPE} != "lld" LDFLAGS+= -z common-page-size=4096 .else LDFLAGS+= -z notext -z ifunc-noplt .endif .endif NORMAL_C= ${CC} -c ${CFLAGS} ${WERROR} ${PROF} ${.IMPSRC} NORMAL_S= ${CC:N${CCACHE_BIN}} -c ${ASM_CFLAGS} ${WERROR} ${.IMPSRC} PROFILE_C= ${CC} -c ${CFLAGS} ${WERROR} ${.IMPSRC} NORMAL_C_NOWERROR= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC} NORMAL_M= ${AWK} -f $S/tools/makeobjops.awk ${.IMPSRC} -c ; \ ${CC} -c ${CFLAGS} ${WERROR} ${PROF} ${.PREFIX}.c NORMAL_FW= uudecode -o ${.TARGET} ${.ALLSRC} NORMAL_FWO= ${LD} -b binary --no-warn-mismatch -d -warn-common -r \ -m ${LD_EMULATION} -o ${.TARGET} ${.ALLSRC:M*.fw} +# for zlib in the kernel +ZLIB_CFLAGS+= -DZ_SOLO +ZLIB_C= ${CC} -c ${ZLIB_CFLAGS} ${CFLAGS} ${.IMPSRC} + # for ZSTD in the kernel (include zstd/lib/freebsd before other CFLAGS) ZSTD_C= ${CC} -c -DZSTD_HEAPMODE=1 -I$S/contrib/zstd/lib/freebsd ${CFLAGS} -I$S/contrib/zstd/lib -I$S/contrib/zstd/lib/common ${WERROR} -Wno-inline -Wno-missing-prototypes ${PROF} -U__BMI__ ${.IMPSRC} # Common for dtrace / zfs CDDL_CFLAGS= -DFREEBSD_NAMECACHE -nostdinc -I$S/cddl/compat/opensolaris -I$S/cddl/contrib/opensolaris/uts/common -I$S -I$S/cddl/contrib/opensolaris/common ${CFLAGS} -Wno-unknown-pragmas -Wno-missing-prototypes -Wno-undef -Wno-strict-prototypes -Wno-cast-qual -Wno-parentheses -Wno-redundant-decls -Wno-missing-braces -Wno-uninitialized -Wno-unused -Wno-inline -Wno-switch -Wno-pointer-arith -Wno-unknown-pragmas CDDL_CFLAGS+= -include $S/cddl/compat/opensolaris/sys/debug_compat.h CDDL_C= ${CC} -c ${CDDL_CFLAGS} ${WERROR} ${PROF} ${.IMPSRC} # Special flags for managing the compat compiles for ZFS ZFS_CFLAGS= -DBUILDING_ZFS -I$S/cddl/contrib/opensolaris/uts/common/fs/zfs ZFS_CFLAGS+= -I$S/cddl/contrib/opensolaris/uts/common/fs/zfs/lua ZFS_CFLAGS+= -I$S/cddl/contrib/opensolaris/uts/common/zmod ZFS_CFLAGS+= -I$S/cddl/contrib/opensolaris/common/zfs ZFS_CFLAGS+= ${CDDL_CFLAGS} ZFS_ASM_CFLAGS= -x assembler-with-cpp -DLOCORE ${ZFS_CFLAGS} ZFS_C= ${CC} -c ${ZFS_CFLAGS} ${WERROR} ${PROF} ${.IMPSRC} ZFS_S= ${CC} -c ${ZFS_ASM_CFLAGS} ${WERROR} ${.IMPSRC} # Special flags for managing the compat compiles for DTrace DTRACE_CFLAGS= -DBUILDING_DTRACE ${CDDL_CFLAGS} -I$S/cddl/dev/dtrace -I$S/cddl/dev/dtrace/${MACHINE_CPUARCH} .if ${MACHINE_CPUARCH} == "amd64" || ${MACHINE_CPUARCH} == "i386" DTRACE_CFLAGS+= -I$S/cddl/contrib/opensolaris/uts/intel -I$S/cddl/dev/dtrace/x86 .endif DTRACE_CFLAGS+= -I$S/cddl/contrib/opensolaris/common/util -I$S -DDIS_MEM -DSMP DTRACE_ASM_CFLAGS= -x assembler-with-cpp -DLOCORE ${DTRACE_CFLAGS} DTRACE_C= ${CC} -c ${DTRACE_CFLAGS} ${WERROR} ${PROF} ${.IMPSRC} DTRACE_S= ${CC} -c ${DTRACE_ASM_CFLAGS} ${WERROR} ${.IMPSRC} # Special flags for managing the compat compiles for DTrace/FBT FBT_CFLAGS= -DBUILDING_DTRACE -nostdinc -I$S/cddl/dev/fbt/${MACHINE_CPUARCH} -I$S/cddl/dev/fbt -I$S/cddl/compat/opensolaris -I$S/cddl/contrib/opensolaris/uts/common -I$S ${CDDL_CFLAGS} .if ${MACHINE_CPUARCH} == "amd64" || ${MACHINE_CPUARCH} == "i386" FBT_CFLAGS+= -I$S/cddl/dev/fbt/x86 .endif FBT_C= ${CC} -c ${FBT_CFLAGS} ${WERROR} ${PROF} ${.IMPSRC} .if ${MK_CTF} != "no" NORMAL_CTFCONVERT= ${CTFCONVERT} ${CTFFLAGS} ${.TARGET} .elif ${MAKE_VERSION} >= 5201111300 NORMAL_CTFCONVERT= .else NORMAL_CTFCONVERT= @: .endif # Linux Kernel Programming Interface C-flags LINUXKPI_INCLUDES= -I$S/compat/linuxkpi/common/include LINUXKPI_C= ${NORMAL_C} ${LINUXKPI_INCLUDES} # Infiniband C flags. Correct include paths and omit errors that linux # does not honor. OFEDINCLUDES= -I$S/ofed/include -I$S/ofed/include/uapi ${LINUXKPI_INCLUDES} OFEDNOERR= -Wno-cast-qual -Wno-pointer-arith OFEDCFLAGS= ${CFLAGS:N-I*} -DCONFIG_INFINIBAND_USER_MEM \ ${OFEDINCLUDES} ${CFLAGS:M-I*} ${OFEDNOERR} OFED_C_NOIMP= ${CC} -c -o ${.TARGET} ${OFEDCFLAGS} ${WERROR} ${PROF} OFED_C= ${OFED_C_NOIMP} ${.IMPSRC} # mlxfw C flags. MLXFW_C= ${OFED_C_NOIMP} \ -I${SRCTOP}/sys/contrib/xz-embedded/freebsd \ -I${SRCTOP}/sys/contrib/xz-embedded/linux/lib/xz \ ${.IMPSRC} GEN_CFILES= $S/$M/$M/genassym.c ${MFILES:T:S/.m$/.c/} SYSTEM_CFILES= config.c env.c hints.c vnode_if.c SYSTEM_DEP= Makefile ${SYSTEM_OBJS} SYSTEM_OBJS= locore.o ${MDOBJS} ${OBJS} SYSTEM_OBJS+= ${SYSTEM_CFILES:.c=.o} SYSTEM_OBJS+= hack.pico MD_ROOT_SIZE_CONFIGURED!= grep MD_ROOT_SIZE opt_md.h || true ; echo .if ${MFS_IMAGE:Uno} != "no" .if empty(MD_ROOT_SIZE_CONFIGURED) SYSTEM_OBJS+= embedfs_${MFS_IMAGE:T:R}.o .endif .endif SYSTEM_LD= @${LD} -m ${LD_EMULATION} -Bdynamic -T ${LDSCRIPT} ${_LDFLAGS} \ --no-warn-mismatch --warn-common --export-dynamic \ --dynamic-linker /red/herring \ -o ${.TARGET} -X ${SYSTEM_OBJS} vers.o SYSTEM_LD_TAIL= @${OBJCOPY} --strip-symbol gcc2_compiled. ${.TARGET} ; \ ${SIZE} ${.TARGET} ; chmod 755 ${.TARGET} SYSTEM_DEP+= ${LDSCRIPT} # Calculate path for .m files early, if needed. .if !defined(NO_MODULES) && !defined(__MPATH) && !make(install) && \ (empty(.MAKEFLAGS:M-V) || defined(NO_SKIP_MPATH)) __MPATH!=find ${S:tA}/ -name \*_if.m .endif # MKMODULESENV is set here so that port makefiles can augment # them. MKMODULESENV+= MAKEOBJDIRPREFIX=${.OBJDIR}/modules KMODDIR=${KODIR} MKMODULESENV+= MACHINE_CPUARCH=${MACHINE_CPUARCH} MKMODULESENV+= MACHINE=${MACHINE} MACHINE_ARCH=${MACHINE_ARCH} MKMODULESENV+= MODULES_EXTRA="${MODULES_EXTRA}" WITHOUT_MODULES="${WITHOUT_MODULES}" MKMODULESENV+= ARCH_FLAGS="${ARCH_FLAGS}" .if (${KERN_IDENT} == LINT) MKMODULESENV+= ALL_MODULES=LINT .endif .if defined(MODULES_OVERRIDE) MKMODULESENV+= MODULES_OVERRIDE="${MODULES_OVERRIDE}" .endif .if defined(DEBUG) MKMODULESENV+= DEBUG_FLAGS="${DEBUG}" .endif .if !defined(NO_MODULES) MKMODULESENV+= __MPATH="${__MPATH}" .endif # Architecture and output format arguments for objcopy to convert image to # object file .if ${MFS_IMAGE:Uno} != "no" .if empty(MD_ROOT_SIZE_CONFIGURED) .if !defined(EMBEDFS_FORMAT.${MACHINE_ARCH}) EMBEDFS_FORMAT.${MACHINE_ARCH}!= awk -F'"' '/OUTPUT_FORMAT/ {print $$2}' ${LDSCRIPT} .if empty(EMBEDFS_FORMAT.${MACHINE_ARCH}) .undef EMBEDFS_FORMAT.${MACHINE_ARCH} .endif .endif .if !defined(EMBEDFS_ARCH.${MACHINE_ARCH}) EMBEDFS_ARCH.${MACHINE_ARCH}!= sed -n '/OUTPUT_ARCH/s/.*(\(.*\)).*/\1/p' ${LDSCRIPT} .if empty(EMBEDFS_ARCH.${MACHINE_ARCH}) .undef EMBEDFS_ARCH.${MACHINE_ARCH} .endif .endif EMBEDFS_FORMAT.arm?= elf32-littlearm EMBEDFS_FORMAT.armv6?= elf32-littlearm EMBEDFS_FORMAT.armv7?= elf32-littlearm EMBEDFS_FORMAT.aarch64?= elf64-littleaarch64 EMBEDFS_FORMAT.mips?= elf32-tradbigmips EMBEDFS_FORMAT.mipsel?= elf32-tradlittlemips EMBEDFS_FORMAT.mips64?= elf64-tradbigmips EMBEDFS_FORMAT.mips64el?= elf64-tradlittlemips EMBEDFS_FORMAT.riscv?= elf64-littleriscv .endif .endif # Detect kernel config options that force stack frames to be turned on. DDB_ENABLED!= grep DDB opt_ddb.h || true ; echo DTR_ENABLED!= grep KDTRACE_FRAME opt_kdtrace.h || true ; echo HWPMC_ENABLED!= grep HWPMC opt_hwpmc_hooks.h || true ; echo Index: head/sys/conf/kmod.mk =================================================================== --- head/sys/conf/kmod.mk (revision 350495) +++ head/sys/conf/kmod.mk (revision 350496) @@ -1,542 +1,544 @@ # From: @(#)bsd.prog.mk 5.26 (Berkeley) 6/25/91 # $FreeBSD$ # # The include file handles building and installing loadable # kernel modules. # # # +++ variables +++ # # CLEANFILES Additional files to remove for the clean and cleandir targets. # # EXPORT_SYMS A list of symbols that should be exported from the module, # or the name of a file containing a list of symbols, or YES # to export all symbols. If not defined, no symbols are # exported. # # KMOD The name of the kernel module to build. # # KMODDIR Base path for kernel modules (see kld(4)). [/boot/kernel] # # KMODOWN Module file owner. [${BINOWN}] # # KMODGRP Module file group. [${BINGRP}] # # KMODMODE Module file mode. [${BINMODE}] # # KMODLOAD Command to load a kernel module [/sbin/kldload] # # KMODUNLOAD Command to unload a kernel module [/sbin/kldunload] # # KMODISLOADED Command to check whether a kernel module is # loaded [/sbin/kldstat -q -n] # # PROG The name of the kernel module to build. # If not supplied, ${KMOD}.ko is used. # # SRCS List of source files. # # FIRMWS List of firmware images in format filename:shortname:version # # FIRMWARE_LICENSE # Set to the name of the license the user has to agree on in # order to use this firmware. See /usr/share/doc/legal # # DESTDIR The tree where the module gets installed. [not set] # # KERNBUILDDIR # Set to the location of the kernel build directory where # the opt_*.h files, .o's and kernel winds up. # # +++ targets +++ # # install: # install the kernel module; if the Makefile # does not itself define the target install, the targets # beforeinstall and afterinstall may also be used to cause # actions immediately before and after the install target # is executed. # # load: # Load a module. # # unload: # Unload a module. # # reload: # Unload if loaded, then load. # AWK?= awk KMODLOAD?= /sbin/kldload KMODUNLOAD?= /sbin/kldunload KMODISLOADED?= /sbin/kldstat -q -n OBJCOPY?= objcopy .include # Grab all the options for a kernel build. For backwards compat, we need to # do this after bsd.own.mk. .include "kern.opts.mk" .include .include "config.mk" # Search for kernel source tree in standard places. .if empty(KERNBUILDDIR) .if !defined(SYSDIR) .for _dir in ${SRCTOP:D${SRCTOP}/sys} \ ${.CURDIR}/../.. ${.CURDIR}/../../.. /sys /usr/src/sys .if !defined(SYSDIR) && exists(${_dir}/kern/) SYSDIR= ${_dir:tA} .endif .endfor .endif .if !defined(SYSDIR) || !exists(${SYSDIR}/kern/) .error "can't find kernel source tree" .endif .endif .SUFFIXES: .out .o .c .cc .cxx .C .y .l .s .S .m # amd64 and mips use direct linking for kmod, all others use shared binaries .if ${MACHINE_CPUARCH} != amd64 && ${MACHINE_CPUARCH} != mips __KLD_SHARED=yes .else __KLD_SHARED=no .endif +ZLIB_CFLAGS+= -DZ_SOLO + .if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing) CFLAGS+= -fno-strict-aliasing .endif WERROR?= -Werror CFLAGS+= ${WERROR} CFLAGS+= -D_KERNEL CFLAGS+= -DKLD_MODULE .if defined(MODULE_TIED) CFLAGS+= -DKLD_TIED .endif # Don't use any standard or source-relative include directories. NOSTDINC= -nostdinc CFLAGS:= ${CFLAGS:N-I*} ${NOSTDINC} ${INCLMAGIC} ${CFLAGS:M-I*} .if defined(KERNBUILDDIR) CFLAGS+= -DHAVE_KERNEL_OPTION_HEADERS -include ${KERNBUILDDIR}/opt_global.h .endif # Add -I paths for system headers. Individual module makefiles don't # need any -I paths for this. Similar defaults for .PATH can't be # set because there are no standard paths for non-headers. CFLAGS+= -I. -I${SYSDIR} -I${SYSDIR}/contrib/ck/include CFLAGS.gcc+= -finline-limit=${INLINE_LIMIT} CFLAGS.gcc+= -fms-extensions CFLAGS.gcc+= --param inline-unit-growth=100 CFLAGS.gcc+= --param large-function-growth=1000 # Disallow common variables, and if we end up with commons from # somewhere unexpected, allocate storage for them in the module itself. CFLAGS+= -fno-common LDFLAGS+= -d -warn-common .if defined(LINKER_FEATURES) && ${LINKER_FEATURES:Mbuild-id} LDFLAGS+= --build-id=sha1 .endif CFLAGS+= ${DEBUG_FLAGS} .if ${MACHINE_CPUARCH} == amd64 CFLAGS+= -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer .endif .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "riscv" CFLAGS+= -fPIC .endif # Temporary workaround for PR 196407, which contains the fascinating details. # Don't allow clang to use fpu instructions or registers in kernel modules. .if ${MACHINE_CPUARCH} == arm .if ${COMPILER_VERSION} < 30800 CFLAGS.clang+= -mllvm -arm-use-movt=0 .else CFLAGS.clang+= -mno-movt .endif CFLAGS.clang+= -mfpu=none CFLAGS+= -funwind-tables .endif .if ${MACHINE_CPUARCH} == powerpc CFLAGS+= -mlongcall -fno-omit-frame-pointer .endif .if ${MACHINE_CPUARCH} == mips CFLAGS+= -G0 -fno-pic -mno-abicalls -mlong-calls .endif .if defined(DEBUG) || defined(DEBUG_FLAGS) CTFFLAGS+= -g .endif .if defined(FIRMWS) ${KMOD:S/$/.c/}: ${SYSDIR}/tools/fw_stub.awk ${AWK} -f ${SYSDIR}/tools/fw_stub.awk ${FIRMWS} -m${KMOD} -c${KMOD:S/$/.c/g} \ ${FIRMWARE_LICENSE:C/.+/-l/}${FIRMWARE_LICENSE} SRCS+= ${KMOD:S/$/.c/} CLEANFILES+= ${KMOD:S/$/.c/} .for _firmw in ${FIRMWS} ${_firmw:C/\:.*$/.fwo/:T}: ${_firmw:C/\:.*$//} @${ECHO} ${_firmw:C/\:.*$//} ${.ALLSRC:M*${_firmw:C/\:.*$//}} @if [ -e ${_firmw:C/\:.*$//} ]; then \ ${LD} -b binary --no-warn-mismatch ${_LDFLAGS} \ -m ${LD_EMULATION} -r -d \ -o ${.TARGET} ${_firmw:C/\:.*$//}; \ else \ ln -s ${.ALLSRC:M*${_firmw:C/\:.*$//}} ${_firmw:C/\:.*$//}; \ ${LD} -b binary --no-warn-mismatch ${_LDFLAGS} \ -m ${LD_EMULATION} -r -d \ -o ${.TARGET} ${_firmw:C/\:.*$//}; \ rm ${_firmw:C/\:.*$//}; \ fi OBJS+= ${_firmw:C/\:.*$/.fwo/:T} .endfor .endif # Conditionally include SRCS based on kernel config options. .for _o in ${KERN_OPTS} SRCS+=${SRCS.${_o}} .endfor OBJS+= ${SRCS:N*.h:R:S/$/.o/g} .if !defined(PROG) PROG= ${KMOD}.ko .endif .if !defined(DEBUG_FLAGS) FULLPROG= ${PROG} .else FULLPROG= ${PROG}.full ${PROG}: ${FULLPROG} ${PROG}.debug ${OBJCOPY} --strip-debug --add-gnu-debuglink=${PROG}.debug \ ${FULLPROG} ${.TARGET} ${PROG}.debug: ${FULLPROG} ${OBJCOPY} --only-keep-debug ${FULLPROG} ${.TARGET} .endif .if ${__KLD_SHARED} == yes ${FULLPROG}: ${KMOD}.kld ${LD} -m ${LD_EMULATION} -Bshareable -znotext ${_LDFLAGS} \ -o ${.TARGET} ${KMOD}.kld .if !defined(DEBUG_FLAGS) ${OBJCOPY} --strip-debug ${.TARGET} .endif .endif EXPORT_SYMS?= NO .if ${EXPORT_SYMS} != YES CLEANFILES+= export_syms .endif .if ${__KLD_SHARED} == yes ${KMOD}.kld: ${OBJS} .else ${FULLPROG}: ${OBJS} .endif .if !defined(FIRMWS) && (${MACHINE_CPUARCH} == "i386") ${LD} -m ${LD_EMULATION} ${_LDFLAGS} -r \ -T ${SYSDIR}/conf/ldscript.set_padding \ -d -o ${.TARGET} ${OBJS} .else ${LD} -m ${LD_EMULATION} ${_LDFLAGS} -r -d -o ${.TARGET} ${OBJS} .endif .if ${MK_CTF} != "no" ${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${OBJS} .endif .if defined(EXPORT_SYMS) .if ${EXPORT_SYMS} != YES .if ${EXPORT_SYMS} == NO :> export_syms .elif !exists(${.CURDIR}/${EXPORT_SYMS}) echo -n "${EXPORT_SYMS:@s@$s${.newline}@}" > export_syms .else grep -v '^#' < ${EXPORT_SYMS} > export_syms .endif ${AWK} -f ${SYSDIR}/conf/kmod_syms.awk ${.TARGET} \ export_syms | xargs -J% ${OBJCOPY} % ${.TARGET} .endif .endif # defined(EXPORT_SYMS) .if defined(PREFIX_SYMS) ${AWK} -v prefix=${PREFIX_SYMS} -f ${SYSDIR}/conf/kmod_syms_prefix.awk \ ${.TARGET} /dev/null | xargs -J% ${OBJCOPY} % ${.TARGET} .endif .if !defined(DEBUG_FLAGS) && ${__KLD_SHARED} == no ${OBJCOPY} --strip-debug ${.TARGET} .endif .if ${COMPILER_TYPE} == "clang" || \ (${COMPILER_TYPE} == "gcc" && ${COMPILER_VERSION} >= 60000) _MAP_DEBUG_PREFIX= yes .endif _ILINKS=machine .if ${MACHINE} != ${MACHINE_CPUARCH} && ${MACHINE} != "arm64" _ILINKS+=${MACHINE_CPUARCH} .endif .if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64" _ILINKS+=x86 .endif CLEANFILES+=${_ILINKS} all: ${PROG} beforedepend: ${_ILINKS} beforebuild: ${_ILINKS} # Ensure that the links exist without depending on it when it exists which # causes all the modules to be rebuilt when the directory pointed to changes. # Ensure that debug info references the path in the source tree. .for _link in ${_ILINKS} .if !exists(${.OBJDIR}/${_link}) OBJS_DEPEND_GUESS+= ${_link} .endif .if defined(_MAP_DEBUG_PREFIX) .if ${_link} == "machine" CFLAGS+= -fdebug-prefix-map=./machine=${SYSDIR}/${MACHINE}/include .else CFLAGS+= -fdebug-prefix-map=./${_link}=${SYSDIR}/${_link}/include .endif .endif .endfor .NOPATH: ${_ILINKS} ${_ILINKS}: @case ${.TARGET} in \ machine) \ path=${SYSDIR}/${MACHINE}/include ;; \ *) \ path=${SYSDIR}/${.TARGET:T}/include ;; \ esac ; \ path=`(cd $$path && /bin/pwd)` ; \ ${ECHO} ${.TARGET:T} "->" $$path ; \ ln -fns $$path ${.TARGET:T} CLEANFILES+= ${PROG} ${KMOD}.kld ${OBJS} .if defined(DEBUG_FLAGS) CLEANFILES+= ${FULLPROG} ${PROG}.debug .endif .if !target(install) _INSTALLFLAGS:= ${INSTALLFLAGS} .for ie in ${INSTALLFLAGS_EDIT} _INSTALLFLAGS:= ${_INSTALLFLAGS${ie}} .endfor .if !target(realinstall) KERN_DEBUGDIR?= ${DEBUGDIR} realinstall: _kmodinstall .ORDER: beforeinstall _kmodinstall _kmodinstall: .PHONY ${INSTALL} -T release -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \ ${_INSTALLFLAGS} ${PROG} ${DESTDIR}${KMODDIR}/ .if defined(DEBUG_FLAGS) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no" ${INSTALL} -T debug -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \ ${_INSTALLFLAGS} ${PROG}.debug ${DESTDIR}${KERN_DEBUGDIR}${KMODDIR}/ .endif .include .if !defined(NO_XREF) afterinstall: _kldxref .ORDER: realinstall _kldxref .ORDER: _installlinks _kldxref _kldxref: .PHONY @if type kldxref >/dev/null 2>&1; then \ ${ECHO} ${KLDXREF_CMD} ${DESTDIR}${KMODDIR}; \ ${KLDXREF_CMD} ${DESTDIR}${KMODDIR}; \ fi .endif .endif # !target(realinstall) .endif # !target(install) .if !target(load) load: ${PROG} .PHONY ${KMODLOAD} -v ${.OBJDIR}/${PROG} .endif .if !target(unload) unload: .PHONY if ${KMODISLOADED} ${PROG} ; then ${KMODUNLOAD} -v ${PROG} ; fi .endif .if !target(reload) reload: unload load .PHONY .endif .if defined(KERNBUILDDIR) .PATH: ${KERNBUILDDIR} CFLAGS+= -I${KERNBUILDDIR} .for _src in ${SRCS:Mopt_*.h} CLEANFILES+= ${_src} .if !target(${_src}) ${_src}: ln -sf ${KERNBUILDDIR}/${_src} ${.TARGET} .endif .endfor .else .for _src in ${SRCS:Mopt_*.h} CLEANFILES+= ${_src} .if !target(${_src}) ${_src}: :> ${.TARGET} .endif .endfor .endif # Add the sanitizer C flags CFLAGS+= ${SAN_CFLAGS} # Add the gcov flags CFLAGS+= ${GCOV_CFLAGS} # Respect configuration-specific C flags. CFLAGS+= ${ARCH_FLAGS} ${CONF_CFLAGS} .if !empty(SRCS:Mvnode_if.c) CLEANFILES+= vnode_if.c vnode_if.c: ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src ${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -c .endif .if !empty(SRCS:Mvnode_if.h) CLEANFILES+= vnode_if.h vnode_if_newproto.h vnode_if_typedef.h vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: ${SYSDIR}/tools/vnode_if.awk \ ${SYSDIR}/kern/vnode_if.src vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h ${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -h vnode_if_newproto.h: ${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -p vnode_if_typedef.h: ${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -q .endif # Build _if.[ch] from _if.m, and clean them when we're done. # __MPATH defined in config.mk _MFILES=${__MPATH:T:O} _MPATH=${__MPATH:H:O:u} .PATH.m: ${_MPATH} .for _i in ${SRCS:M*_if.[ch]} _MATCH=M${_i:R:S/$/.m/} _MATCHES=${_MFILES:${_MATCH}} .if !empty(_MATCHES) CLEANFILES+= ${_i} .endif .endfor # _i .m.c: ${SYSDIR}/tools/makeobjops.awk ${AWK} -f ${SYSDIR}/tools/makeobjops.awk ${.IMPSRC} -c .m.h: ${SYSDIR}/tools/makeobjops.awk ${AWK} -f ${SYSDIR}/tools/makeobjops.awk ${.IMPSRC} -h .for _i in mii pccard .if !empty(SRCS:M${_i}devs.h) CLEANFILES+= ${_i}devs.h ${_i}devs.h: ${SYSDIR}/tools/${_i}devs2h.awk ${SYSDIR}/dev/${_i}/${_i}devs ${AWK} -f ${SYSDIR}/tools/${_i}devs2h.awk ${SYSDIR}/dev/${_i}/${_i}devs .endif .endfor # _i .if !empty(SRCS:Mbhnd_nvram_map.h) CLEANFILES+= bhnd_nvram_map.h bhnd_nvram_map.h: ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.awk \ ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.sh \ ${SYSDIR}/dev/bhnd/nvram/nvram_map bhnd_nvram_map.h: sh ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.sh \ ${SYSDIR}/dev/bhnd/nvram/nvram_map -h .endif .if !empty(SRCS:Mbhnd_nvram_map_data.h) CLEANFILES+= bhnd_nvram_map_data.h bhnd_nvram_map_data.h: ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.awk \ ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.sh \ ${SYSDIR}/dev/bhnd/nvram/nvram_map bhnd_nvram_map_data.h: sh ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.sh \ ${SYSDIR}/dev/bhnd/nvram/nvram_map -d .endif .if !empty(SRCS:Musbdevs.h) CLEANFILES+= usbdevs.h usbdevs.h: ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs ${AWK} -f ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs -h .endif .if !empty(SRCS:Musbdevs_data.h) CLEANFILES+= usbdevs_data.h usbdevs_data.h: ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs ${AWK} -f ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs -d .endif .if !empty(SRCS:Msdiodevs.h) CLEANFILES+= sdiodevs.h sdiodevs.h: ${SYSDIR}/tools/sdiodevs2h.awk ${SYSDIR}/dev/sdio/sdiodevs ${AWK} -f ${SYSDIR}/tools/sdiodevs2h.awk ${SYSDIR}/dev/sdio/sdiodevs -h .endif .if !empty(SRCS:Msdiodevs_data.h) CLEANFILES+= sdiodevs_data.h sdiodevs_data.h: ${SYSDIR}/tools/sdiodevs2h.awk ${SYSDIR}/dev/sdio/sdiodevs ${AWK} -f ${SYSDIR}/tools/sdiodevs2h.awk ${SYSDIR}/dev/sdio/sdiodevs -d .endif .if !empty(SRCS:Macpi_quirks.h) CLEANFILES+= acpi_quirks.h acpi_quirks.h: ${SYSDIR}/tools/acpi_quirks2h.awk ${SYSDIR}/dev/acpica/acpi_quirks ${AWK} -f ${SYSDIR}/tools/acpi_quirks2h.awk ${SYSDIR}/dev/acpica/acpi_quirks .endif .if !empty(SRCS:Massym.inc) || !empty(DPSRCS:Massym.inc) CLEANFILES+= assym.inc genassym.o DEPENDOBJS+= genassym.o DPSRCS+= offset.inc .endif .if defined(MODULE_TIED) DPSRCS+= offset.inc .endif .if !empty(SRCS:Moffset.inc) || !empty(DPSRCS:Moffset.inc) CLEANFILES+= offset.inc genoffset.o DEPENDOBJS+= genoffset.o .endif assym.inc: genassym.o offset.inc: genoffset.o assym.inc: ${SYSDIR}/kern/genassym.sh sh ${SYSDIR}/kern/genassym.sh genassym.o > ${.TARGET} genassym.o: ${SYSDIR}/${MACHINE}/${MACHINE}/genassym.c offset.inc genassym.o: ${SRCS:Mopt_*.h} ${CC} -c ${CFLAGS:N-flto:N-fno-common} \ ${SYSDIR}/${MACHINE}/${MACHINE}/genassym.c offset.inc: ${SYSDIR}/kern/genoffset.sh genoffset.o sh ${SYSDIR}/kern/genoffset.sh genoffset.o > ${.TARGET} genoffset.o: ${SYSDIR}/kern/genoffset.c genoffset.o: ${SRCS:Mopt_*.h} ${CC} -c ${CFLAGS:N-flto:N-fno-common} \ ${SYSDIR}/kern/genoffset.c CLEANDEPENDFILES+= ${_ILINKS} # .depend needs include links so we remove them only together. cleanilinks: rm -f ${_ILINKS} OBJS_DEPEND_GUESS+= ${SRCS:M*.h} .if defined(KERNBUILDDIR) OBJS_DEPEND_GUESS+= opt_global.h .endif .include .include .include .include "kern.mk" Index: head/sys/contrib/zlib/deflate.c =================================================================== --- head/sys/contrib/zlib/deflate.c (revision 350495) +++ head/sys/contrib/zlib/deflate.c (revision 350496) @@ -1,2163 +1,2166 @@ /* deflate.c -- compress data using the deflation algorithm * Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* * ALGORITHM * * The "deflation" process depends on being able to identify portions * of the input text which are identical to earlier input (within a * sliding window trailing behind the input currently being processed). * * The most straightforward technique turns out to be the fastest for * most input files: try all possible matches and select the longest. * The key feature of this algorithm is that insertions into the string * dictionary are very simple and thus fast, and deletions are avoided * completely. Insertions are performed at each input character, whereas * string matches are performed only when the previous match ends. So it * is preferable to spend more time in matches to allow very fast string * insertions and avoid deletions. The matching algorithm for small * strings is inspired from that of Rabin & Karp. A brute force approach * is used to find longer strings when a small match has been found. * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze * (by Leonid Broukhis). * A previous version of this file used a more sophisticated algorithm * (by Fiala and Greene) which is guaranteed to run in linear amortized * time, but has a larger average cost, uses more memory and is patented. * However the F&G algorithm may be faster for some highly redundant * files if the parameter max_chain_length (described below) is too large. * * ACKNOWLEDGEMENTS * * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and * I found it in 'freeze' written by Leonid Broukhis. * Thanks to many people for bug reports and testing. * * REFERENCES * * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". * Available in http://tools.ietf.org/html/rfc1951 * * A description of the Rabin and Karp algorithm is given in the book * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. * * Fiala,E.R., and Greene,D.H. * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 * */ /* @(#) $Id$ */ #include "deflate.h" const char deflate_copyright[] = " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot include such an acknowledgment, I would appreciate that you keep this copyright string in the executable of your product. */ /* =========================================================================== * Function prototypes. */ typedef enum { need_more, /* block not completed, need more input or more output */ block_done, /* block flush performed */ finish_started, /* finish started, need only more output at next deflate */ finish_done /* finish done, accept no more input or output */ } block_state; typedef block_state (*compress_func) OF((deflate_state *s, int flush)); /* Compression function. Returns the block state after the call. */ local int deflateStateCheck OF((z_streamp strm)); local void slide_hash OF((deflate_state *s)); local void fill_window OF((deflate_state *s)); local block_state deflate_stored OF((deflate_state *s, int flush)); local block_state deflate_fast OF((deflate_state *s, int flush)); #ifndef FASTEST local block_state deflate_slow OF((deflate_state *s, int flush)); #endif local block_state deflate_rle OF((deflate_state *s, int flush)); local block_state deflate_huff OF((deflate_state *s, int flush)); local void lm_init OF((deflate_state *s)); local void putShortMSB OF((deflate_state *s, uInt b)); local void flush_pending OF((z_streamp strm)); local unsigned read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); #ifdef ASMV # pragma message("Assembler code may have bugs -- use at your own risk") void match_init OF((void)); /* asm code initialization */ uInt longest_match OF((deflate_state *s, IPos cur_match)); #else local uInt longest_match OF((deflate_state *s, IPos cur_match)); #endif #ifdef ZLIB_DEBUG local void check_match OF((deflate_state *s, IPos start, IPos match, int length)); #endif /* =========================================================================== * Local data */ #define NIL 0 /* Tail of hash chains */ #ifndef TOO_FAR # define TOO_FAR 4096 #endif /* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ /* Values for max_lazy_match, good_match and max_chain_length, depending on * the desired pack level (0..9). The values given below have been tuned to * exclude worst case performance for pathological files. Better values may be * found for specific files. */ typedef struct config_s { ush good_length; /* reduce lazy search above this match length */ ush max_lazy; /* do not perform lazy search above this match length */ ush nice_length; /* quit search above this match length */ ush max_chain; compress_func func; } config; #ifdef FASTEST local const config configuration_table[2] = { /* good lazy nice chain */ /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ /* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ #else local const config configuration_table[10] = { /* good lazy nice chain */ /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ /* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ /* 2 */ {4, 5, 16, 8, deflate_fast}, /* 3 */ {4, 6, 32, 32, deflate_fast}, /* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ /* 5 */ {8, 16, 32, 32, deflate_slow}, /* 6 */ {8, 16, 128, 128, deflate_slow}, /* 7 */ {8, 32, 128, 256, deflate_slow}, /* 8 */ {32, 128, 258, 1024, deflate_slow}, /* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ #endif /* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 * For deflate_fast() (levels <= 3) good is ignored and lazy has a different * meaning. */ /* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */ #define RANK(f) (((f) * 2) - ((f) > 4 ? 9 : 0)) /* =========================================================================== * Update a hash value with the given input byte * IN assertion: all calls to UPDATE_HASH are made with consecutive input * characters, so that a running hash key can be computed from the previous * key instead of complete recalculation each time. */ #define UPDATE_HASH(s,h,c) (h = (((h)<hash_shift) ^ (c)) & s->hash_mask) /* =========================================================================== * Insert string str in the dictionary and set match_head to the previous head * of the hash chain (the most recent string with same hash key). Return * the previous length of the hash chain. * If this file is compiled with -DFASTEST, the compression level is forced * to 1, and no hash chains are maintained. * IN assertion: all calls to INSERT_STRING are made with consecutive input * characters and the first MIN_MATCH bytes of str are valid (except for * the last MIN_MATCH-1 bytes of the input file). */ #ifdef FASTEST #define INSERT_STRING(s, str, match_head) \ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ match_head = s->head[s->ins_h], \ s->head[s->ins_h] = (Pos)(str)) #else #define INSERT_STRING(s, str, match_head) \ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ s->head[s->ins_h] = (Pos)(str)) #endif /* =========================================================================== * Initialize the hash table (avoiding 64K overflow for 16 bit systems). * prev[] will be initialized on the fly. */ -#define CLEAR_HASH(s) \ +#define CLEAR_HASH(s) do { \ s->head[s->hash_size-1] = NIL; \ - zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); + zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); \ + } while (0) /* =========================================================================== * Slide the hash table when sliding the window down (could be avoided with 32 * bit values at the expense of memory usage). We slide even when level == 0 to * keep the hash table consistent if we switch back to level > 0 later. */ local void slide_hash(s) deflate_state *s; { unsigned n, m; Posf *p; uInt wsize = s->w_size; n = s->hash_size; p = &s->head[n]; do { m = *--p; *p = (Pos)(m >= wsize ? m - wsize : NIL); } while (--n); n = wsize; #ifndef FASTEST p = &s->prev[n]; do { m = *--p; *p = (Pos)(m >= wsize ? m - wsize : NIL); /* If n is not on any hash chain, prev[n] is garbage but * its value will never be used. */ } while (--n); #endif } /* ========================================================================= */ int ZEXPORT deflateInit_(strm, level, version, stream_size) z_streamp strm; int level; const char *version; int stream_size; { return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, version, stream_size); /* To do: ignore strm->next_in if we use it as window */ } /* ========================================================================= */ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, version, stream_size) z_streamp strm; int level; int method; int windowBits; int memLevel; int strategy; const char *version; int stream_size; { deflate_state *s; int wrap = 1; static const char my_version[] = ZLIB_VERSION; ushf *overlay; /* We overlay pending_buf and d_buf+l_buf. This works since the average * output size for (length,distance) codes is <= 24 bits. */ if (version == Z_NULL || version[0] != my_version[0] || stream_size != sizeof(z_stream)) { return Z_VERSION_ERROR; } if (strm == Z_NULL) return Z_STREAM_ERROR; strm->msg = Z_NULL; if (strm->zalloc == (alloc_func)0) { #ifdef Z_SOLO return Z_STREAM_ERROR; #else strm->zalloc = zcalloc; strm->opaque = (voidpf)0; #endif } if (strm->zfree == (free_func)0) #ifdef Z_SOLO return Z_STREAM_ERROR; #else strm->zfree = zcfree; #endif #ifdef FASTEST if (level != 0) level = 1; #else if (level == Z_DEFAULT_COMPRESSION) level = 6; #endif if (windowBits < 0) { /* suppress zlib wrapper */ wrap = 0; windowBits = -windowBits; } #ifdef GZIP else if (windowBits > 15) { wrap = 2; /* write gzip wrapper instead */ windowBits -= 16; } #endif if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED || (windowBits == 8 && wrap != 1)) { return Z_STREAM_ERROR; } if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); if (s == Z_NULL) return Z_MEM_ERROR; strm->state = (struct internal_state FAR *)s; s->strm = strm; s->status = INIT_STATE; /* to pass state test in deflateReset() */ s->wrap = wrap; s->gzhead = Z_NULL; s->w_bits = (uInt)windowBits; s->w_size = 1 << s->w_bits; s->w_mask = s->w_size - 1; s->hash_bits = (uInt)memLevel + 7; s->hash_size = 1 << s->hash_bits; s->hash_mask = s->hash_size - 1; s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); s->high_water = 0; /* nothing written to s->window yet */ s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); s->pending_buf = (uchf *) overlay; s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || s->pending_buf == Z_NULL) { s->status = FINISH_STATE; strm->msg = ERR_MSG(Z_MEM_ERROR); deflateEnd (strm); return Z_MEM_ERROR; } s->d_buf = overlay + s->lit_bufsize/sizeof(ush); s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; s->level = level; s->strategy = strategy; s->method = (Byte)method; return deflateReset(strm); } /* ========================================================================= * Check for a valid deflate stream state. Return 0 if ok, 1 if not. */ local int deflateStateCheck (strm) z_streamp strm; { deflate_state *s; if (strm == Z_NULL || strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) return 1; s = strm->state; if (s == Z_NULL || s->strm != strm || (s->status != INIT_STATE && #ifdef GZIP s->status != GZIP_STATE && #endif s->status != EXTRA_STATE && s->status != NAME_STATE && s->status != COMMENT_STATE && s->status != HCRC_STATE && s->status != BUSY_STATE && s->status != FINISH_STATE)) return 1; return 0; } /* ========================================================================= */ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) z_streamp strm; const Bytef *dictionary; uInt dictLength; { deflate_state *s; uInt str, n; int wrap; unsigned avail; z_const unsigned char *next; if (deflateStateCheck(strm) || dictionary == Z_NULL) return Z_STREAM_ERROR; s = strm->state; wrap = s->wrap; if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead) return Z_STREAM_ERROR; /* when using zlib wrappers, compute Adler-32 for provided dictionary */ if (wrap == 1) strm->adler = adler32(strm->adler, dictionary, dictLength); s->wrap = 0; /* avoid computing Adler-32 in read_buf */ /* if dictionary would fill window, just replace the history */ if (dictLength >= s->w_size) { if (wrap == 0) { /* already empty otherwise */ CLEAR_HASH(s); s->strstart = 0; s->block_start = 0L; s->insert = 0; } dictionary += dictLength - s->w_size; /* use the tail */ dictLength = s->w_size; } /* insert dictionary into window and hash */ avail = strm->avail_in; next = strm->next_in; strm->avail_in = dictLength; strm->next_in = (z_const Bytef *)dictionary; fill_window(s); while (s->lookahead >= MIN_MATCH) { str = s->strstart; n = s->lookahead - (MIN_MATCH-1); do { UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); #ifndef FASTEST s->prev[str & s->w_mask] = s->head[s->ins_h]; #endif s->head[s->ins_h] = (Pos)str; str++; } while (--n); s->strstart = str; s->lookahead = MIN_MATCH-1; fill_window(s); } s->strstart += s->lookahead; s->block_start = (long)s->strstart; s->insert = s->lookahead; s->lookahead = 0; s->match_length = s->prev_length = MIN_MATCH-1; s->match_available = 0; strm->next_in = next; strm->avail_in = avail; s->wrap = wrap; return Z_OK; } /* ========================================================================= */ int ZEXPORT deflateGetDictionary (strm, dictionary, dictLength) z_streamp strm; Bytef *dictionary; uInt *dictLength; { deflate_state *s; uInt len; if (deflateStateCheck(strm)) return Z_STREAM_ERROR; s = strm->state; len = s->strstart + s->lookahead; if (len > s->w_size) len = s->w_size; if (dictionary != Z_NULL && len) zmemcpy(dictionary, s->window + s->strstart + s->lookahead - len, len); if (dictLength != Z_NULL) *dictLength = len; return Z_OK; } /* ========================================================================= */ int ZEXPORT deflateResetKeep (strm) z_streamp strm; { deflate_state *s; if (deflateStateCheck(strm)) { return Z_STREAM_ERROR; } strm->total_in = strm->total_out = 0; strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ strm->data_type = Z_UNKNOWN; s = (deflate_state *)strm->state; s->pending = 0; s->pending_out = s->pending_buf; if (s->wrap < 0) { s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ } s->status = #ifdef GZIP s->wrap == 2 ? GZIP_STATE : #endif s->wrap ? INIT_STATE : BUSY_STATE; strm->adler = #ifdef GZIP s->wrap == 2 ? crc32(0L, Z_NULL, 0) : #endif adler32(0L, Z_NULL, 0); s->last_flush = -2; _tr_init(s); return Z_OK; } /* ========================================================================= */ int ZEXPORT deflateReset (strm) z_streamp strm; { int ret; ret = deflateResetKeep(strm); if (ret == Z_OK) lm_init(strm->state); return ret; } /* ========================================================================= */ int ZEXPORT deflateSetHeader (strm, head) z_streamp strm; gz_headerp head; { if (deflateStateCheck(strm) || strm->state->wrap != 2) return Z_STREAM_ERROR; strm->state->gzhead = head; return Z_OK; } /* ========================================================================= */ int ZEXPORT deflatePending (strm, pending, bits) unsigned *pending; int *bits; z_streamp strm; { if (deflateStateCheck(strm)) return Z_STREAM_ERROR; if (pending != Z_NULL) *pending = strm->state->pending; if (bits != Z_NULL) *bits = strm->state->bi_valid; return Z_OK; } /* ========================================================================= */ int ZEXPORT deflatePrime (strm, bits, value) z_streamp strm; int bits; int value; { deflate_state *s; int put; if (deflateStateCheck(strm)) return Z_STREAM_ERROR; s = strm->state; if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3)) return Z_BUF_ERROR; do { put = Buf_size - s->bi_valid; if (put > bits) put = bits; s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid); s->bi_valid += put; _tr_flush_bits(s); value >>= put; bits -= put; } while (bits); return Z_OK; } /* ========================================================================= */ int ZEXPORT deflateParams(strm, level, strategy) z_streamp strm; int level; int strategy; { deflate_state *s; compress_func func; if (deflateStateCheck(strm)) return Z_STREAM_ERROR; s = strm->state; #ifdef FASTEST if (level != 0) level = 1; #else if (level == Z_DEFAULT_COMPRESSION) level = 6; #endif if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { return Z_STREAM_ERROR; } func = configuration_table[s->level].func; if ((strategy != s->strategy || func != configuration_table[level].func) && s->last_flush != -2) { /* Flush the last buffer: */ int err = deflate(strm, Z_BLOCK); if (err == Z_STREAM_ERROR) return err; if (strm->avail_in || (s->strstart - s->block_start) + s->lookahead) return Z_BUF_ERROR; } if (s->level != level) { if (s->level == 0 && s->matches != 0) { if (s->matches == 1) slide_hash(s); else CLEAR_HASH(s); s->matches = 0; } s->level = level; s->max_lazy_match = configuration_table[level].max_lazy; s->good_match = configuration_table[level].good_length; s->nice_match = configuration_table[level].nice_length; s->max_chain_length = configuration_table[level].max_chain; } s->strategy = strategy; return Z_OK; } /* ========================================================================= */ int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) z_streamp strm; int good_length; int max_lazy; int nice_length; int max_chain; { deflate_state *s; if (deflateStateCheck(strm)) return Z_STREAM_ERROR; s = strm->state; s->good_match = (uInt)good_length; s->max_lazy_match = (uInt)max_lazy; s->nice_match = nice_length; s->max_chain_length = (uInt)max_chain; return Z_OK; } /* ========================================================================= * For the default windowBits of 15 and memLevel of 8, this function returns * a close to exact, as well as small, upper bound on the compressed size. * They are coded as constants here for a reason--if the #define's are * changed, then this function needs to be changed as well. The return * value for 15 and 8 only works for those exact settings. * * For any setting other than those defaults for windowBits and memLevel, * the value returned is a conservative worst case for the maximum expansion * resulting from using fixed blocks instead of stored blocks, which deflate * can emit on compressed data for some combinations of the parameters. * * This function could be more sophisticated to provide closer upper bounds for * every combination of windowBits and memLevel. But even the conservative * upper bound of about 14% expansion does not seem onerous for output buffer * allocation. */ uLong ZEXPORT deflateBound(strm, sourceLen) z_streamp strm; uLong sourceLen; { deflate_state *s; uLong complen, wraplen; /* conservative upper bound for compressed data */ complen = sourceLen + ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5; /* if can't get parameters, return conservative bound plus zlib wrapper */ if (deflateStateCheck(strm)) return complen + 6; /* compute wrapper length */ s = strm->state; switch (s->wrap) { case 0: /* raw deflate */ wraplen = 0; break; case 1: /* zlib wrapper */ wraplen = 6 + (s->strstart ? 4 : 0); break; #ifdef GZIP case 2: /* gzip wrapper */ wraplen = 18; if (s->gzhead != Z_NULL) { /* user-supplied gzip header */ Bytef *str; if (s->gzhead->extra != Z_NULL) wraplen += 2 + s->gzhead->extra_len; str = s->gzhead->name; if (str != Z_NULL) do { wraplen++; } while (*str++); str = s->gzhead->comment; if (str != Z_NULL) do { wraplen++; } while (*str++); if (s->gzhead->hcrc) wraplen += 2; } break; #endif default: /* for compiler happiness */ wraplen = 6; } /* if not default parameters, return conservative bound */ if (s->w_bits != 15 || s->hash_bits != 8 + 7) return complen + wraplen; /* default settings: return tight bound for that case */ return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + (sourceLen >> 25) + 13 - 6 + wraplen; } /* ========================================================================= * Put a short in the pending buffer. The 16-bit value is put in MSB order. * IN assertion: the stream state is correct and there is enough room in * pending_buf. */ local void putShortMSB (s, b) deflate_state *s; uInt b; { put_byte(s, (Byte)(b >> 8)); put_byte(s, (Byte)(b & 0xff)); } /* ========================================================================= * Flush as much pending output as possible. All deflate() output, except for * some deflate_stored() output, goes through this function so some * applications may wish to modify it to avoid allocating a large * strm->next_out buffer and copying into it. (See also read_buf()). */ local void flush_pending(strm) z_streamp strm; { unsigned len; deflate_state *s = strm->state; _tr_flush_bits(s); len = s->pending; if (len > strm->avail_out) len = strm->avail_out; if (len == 0) return; zmemcpy(strm->next_out, s->pending_out, len); strm->next_out += len; s->pending_out += len; strm->total_out += len; strm->avail_out -= len; s->pending -= len; if (s->pending == 0) { s->pending_out = s->pending_buf; } } /* =========================================================================== * Update the header CRC with the bytes s->pending_buf[beg..s->pending - 1]. */ #define HCRC_UPDATE(beg) \ do { \ if (s->gzhead->hcrc && s->pending > (beg)) \ strm->adler = crc32(strm->adler, s->pending_buf + (beg), \ s->pending - (beg)); \ } while (0) /* ========================================================================= */ int ZEXPORT deflate (strm, flush) z_streamp strm; int flush; { int old_flush; /* value of flush param for previous deflate call */ deflate_state *s; if (deflateStateCheck(strm) || flush > Z_BLOCK || flush < 0) { return Z_STREAM_ERROR; } s = strm->state; if (strm->next_out == Z_NULL || (strm->avail_in != 0 && strm->next_in == Z_NULL) || (s->status == FINISH_STATE && flush != Z_FINISH)) { ERR_RETURN(strm, Z_STREAM_ERROR); } if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); old_flush = s->last_flush; s->last_flush = flush; /* Flush as much pending output as possible */ if (s->pending != 0) { flush_pending(strm); if (strm->avail_out == 0) { /* Since avail_out is 0, deflate will be called again with * more output space, but possibly with both pending and * avail_in equal to zero. There won't be anything to do, * but this is not an error situation so make sure we * return OK instead of BUF_ERROR at next call of deflate: */ s->last_flush = -1; return Z_OK; } /* Make sure there is something to do and avoid duplicate consecutive * flushes. For repeated and useless calls with Z_FINISH, we keep * returning Z_STREAM_END instead of Z_BUF_ERROR. */ } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) && flush != Z_FINISH) { ERR_RETURN(strm, Z_BUF_ERROR); } /* User must not provide more input after the first FINISH: */ if (s->status == FINISH_STATE && strm->avail_in != 0) { ERR_RETURN(strm, Z_BUF_ERROR); } /* Write the header */ if (s->status == INIT_STATE) { /* zlib header */ uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; uInt level_flags; if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) level_flags = 0; else if (s->level < 6) level_flags = 1; else if (s->level == 6) level_flags = 2; else level_flags = 3; header |= (level_flags << 6); if (s->strstart != 0) header |= PRESET_DICT; header += 31 - (header % 31); putShortMSB(s, header); /* Save the adler32 of the preset dictionary: */ if (s->strstart != 0) { putShortMSB(s, (uInt)(strm->adler >> 16)); putShortMSB(s, (uInt)(strm->adler & 0xffff)); } strm->adler = adler32(0L, Z_NULL, 0); s->status = BUSY_STATE; /* Compression must start with an empty pending buffer */ flush_pending(strm); if (s->pending != 0) { s->last_flush = -1; return Z_OK; } } #ifdef GZIP if (s->status == GZIP_STATE) { /* gzip header */ strm->adler = crc32(0L, Z_NULL, 0); put_byte(s, 31); put_byte(s, 139); put_byte(s, 8); if (s->gzhead == Z_NULL) { put_byte(s, 0); put_byte(s, 0); put_byte(s, 0); put_byte(s, 0); put_byte(s, 0); put_byte(s, s->level == 9 ? 2 : (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? 4 : 0)); put_byte(s, OS_CODE); s->status = BUSY_STATE; /* Compression must start with an empty pending buffer */ flush_pending(strm); if (s->pending != 0) { s->last_flush = -1; return Z_OK; } } else { put_byte(s, (s->gzhead->text ? 1 : 0) + (s->gzhead->hcrc ? 2 : 0) + (s->gzhead->extra == Z_NULL ? 0 : 4) + (s->gzhead->name == Z_NULL ? 0 : 8) + (s->gzhead->comment == Z_NULL ? 0 : 16) ); put_byte(s, (Byte)(s->gzhead->time & 0xff)); put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); put_byte(s, s->level == 9 ? 2 : (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? 4 : 0)); put_byte(s, s->gzhead->os & 0xff); if (s->gzhead->extra != Z_NULL) { put_byte(s, s->gzhead->extra_len & 0xff); put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); } if (s->gzhead->hcrc) strm->adler = crc32(strm->adler, s->pending_buf, s->pending); s->gzindex = 0; s->status = EXTRA_STATE; } } if (s->status == EXTRA_STATE) { if (s->gzhead->extra != Z_NULL) { ulg beg = s->pending; /* start of bytes to update crc */ uInt left = (s->gzhead->extra_len & 0xffff) - s->gzindex; while (s->pending + left > s->pending_buf_size) { uInt copy = s->pending_buf_size - s->pending; zmemcpy(s->pending_buf + s->pending, s->gzhead->extra + s->gzindex, copy); s->pending = s->pending_buf_size; HCRC_UPDATE(beg); s->gzindex += copy; flush_pending(strm); if (s->pending != 0) { s->last_flush = -1; return Z_OK; } beg = 0; left -= copy; } zmemcpy(s->pending_buf + s->pending, s->gzhead->extra + s->gzindex, left); s->pending += left; HCRC_UPDATE(beg); s->gzindex = 0; } s->status = NAME_STATE; } if (s->status == NAME_STATE) { if (s->gzhead->name != Z_NULL) { ulg beg = s->pending; /* start of bytes to update crc */ int val; do { if (s->pending == s->pending_buf_size) { HCRC_UPDATE(beg); flush_pending(strm); if (s->pending != 0) { s->last_flush = -1; return Z_OK; } beg = 0; } val = s->gzhead->name[s->gzindex++]; put_byte(s, val); } while (val != 0); HCRC_UPDATE(beg); s->gzindex = 0; } s->status = COMMENT_STATE; } if (s->status == COMMENT_STATE) { if (s->gzhead->comment != Z_NULL) { ulg beg = s->pending; /* start of bytes to update crc */ int val; do { if (s->pending == s->pending_buf_size) { HCRC_UPDATE(beg); flush_pending(strm); if (s->pending != 0) { s->last_flush = -1; return Z_OK; } beg = 0; } val = s->gzhead->comment[s->gzindex++]; put_byte(s, val); } while (val != 0); HCRC_UPDATE(beg); } s->status = HCRC_STATE; } if (s->status == HCRC_STATE) { if (s->gzhead->hcrc) { if (s->pending + 2 > s->pending_buf_size) { flush_pending(strm); if (s->pending != 0) { s->last_flush = -1; return Z_OK; } } put_byte(s, (Byte)(strm->adler & 0xff)); put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); strm->adler = crc32(0L, Z_NULL, 0); } s->status = BUSY_STATE; /* Compression must start with an empty pending buffer */ flush_pending(strm); if (s->pending != 0) { s->last_flush = -1; return Z_OK; } } #endif /* Start a new block or continue the current one. */ if (strm->avail_in != 0 || s->lookahead != 0 || (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { block_state bstate; bstate = s->level == 0 ? deflate_stored(s, flush) : s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) : s->strategy == Z_RLE ? deflate_rle(s, flush) : (*(configuration_table[s->level].func))(s, flush); if (bstate == finish_started || bstate == finish_done) { s->status = FINISH_STATE; } if (bstate == need_more || bstate == finish_started) { if (strm->avail_out == 0) { s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ } return Z_OK; /* If flush != Z_NO_FLUSH && avail_out == 0, the next call * of deflate should use the same flush parameter to make sure * that the flush is complete. So we don't have to output an * empty block here, this will be done at next call. This also * ensures that for a very small output buffer, we emit at most * one empty block. */ } if (bstate == block_done) { if (flush == Z_PARTIAL_FLUSH) { _tr_align(s); } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */ _tr_stored_block(s, (char*)0, 0L, 0); /* For a full flush, this empty block will be recognized * as a special marker by inflate_sync(). */ if (flush == Z_FULL_FLUSH) { CLEAR_HASH(s); /* forget history */ if (s->lookahead == 0) { s->strstart = 0; s->block_start = 0L; s->insert = 0; } } } flush_pending(strm); if (strm->avail_out == 0) { s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ return Z_OK; } } } if (flush != Z_FINISH) return Z_OK; if (s->wrap <= 0) return Z_STREAM_END; /* Write the trailer */ #ifdef GZIP if (s->wrap == 2) { put_byte(s, (Byte)(strm->adler & 0xff)); put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); put_byte(s, (Byte)(strm->total_in & 0xff)); put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); } else #endif { putShortMSB(s, (uInt)(strm->adler >> 16)); putShortMSB(s, (uInt)(strm->adler & 0xffff)); } flush_pending(strm); /* If avail_out is zero, the application will call deflate again * to flush the rest. */ if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ return s->pending != 0 ? Z_OK : Z_STREAM_END; } /* ========================================================================= */ int ZEXPORT deflateEnd (strm) z_streamp strm; { int status; if (deflateStateCheck(strm)) return Z_STREAM_ERROR; status = strm->state->status; /* Deallocate in reverse order of allocations: */ TRY_FREE(strm, strm->state->pending_buf); TRY_FREE(strm, strm->state->head); TRY_FREE(strm, strm->state->prev); TRY_FREE(strm, strm->state->window); ZFREE(strm, strm->state); strm->state = Z_NULL; return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; } /* ========================================================================= * Copy the source state to the destination state. * To simplify the source, this is not supported for 16-bit MSDOS (which * doesn't have enough memory anyway to duplicate compression states). */ int ZEXPORT deflateCopy (dest, source) z_streamp dest; z_streamp source; { #ifdef MAXSEG_64K return Z_STREAM_ERROR; #else deflate_state *ds; deflate_state *ss; ushf *overlay; if (deflateStateCheck(source) || dest == Z_NULL) { return Z_STREAM_ERROR; } ss = source->state; zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); if (ds == Z_NULL) return Z_MEM_ERROR; dest->state = (struct internal_state FAR *) ds; zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state)); ds->strm = dest; ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); ds->pending_buf = (uchf *) overlay; if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || ds->pending_buf == Z_NULL) { deflateEnd (dest); return Z_MEM_ERROR; } /* following zmemcpy do not work for 16-bit MSDOS */ zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos)); zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos)); zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; ds->l_desc.dyn_tree = ds->dyn_ltree; ds->d_desc.dyn_tree = ds->dyn_dtree; ds->bl_desc.dyn_tree = ds->bl_tree; return Z_OK; #endif /* MAXSEG_64K */ } /* =========================================================================== * Read a new buffer from the current input stream, update the adler32 * and total number of bytes read. All deflate() input goes through * this function so some applications may wish to modify it to avoid * allocating a large strm->next_in buffer and copying from it. * (See also flush_pending()). */ local unsigned read_buf(strm, buf, size) z_streamp strm; Bytef *buf; unsigned size; { unsigned len = strm->avail_in; if (len > size) len = size; if (len == 0) return 0; strm->avail_in -= len; zmemcpy(buf, strm->next_in, len); if (strm->state->wrap == 1) { strm->adler = adler32(strm->adler, buf, len); } #ifdef GZIP else if (strm->state->wrap == 2) { strm->adler = crc32(strm->adler, buf, len); } #endif strm->next_in += len; strm->total_in += len; return len; } /* =========================================================================== * Initialize the "longest match" routines for a new zlib stream */ local void lm_init (s) deflate_state *s; { s->window_size = (ulg)2L*s->w_size; CLEAR_HASH(s); /* Set the default configuration parameters: */ s->max_lazy_match = configuration_table[s->level].max_lazy; s->good_match = configuration_table[s->level].good_length; s->nice_match = configuration_table[s->level].nice_length; s->max_chain_length = configuration_table[s->level].max_chain; s->strstart = 0; s->block_start = 0L; s->lookahead = 0; s->insert = 0; s->match_length = s->prev_length = MIN_MATCH-1; s->match_available = 0; s->ins_h = 0; #ifndef FASTEST #ifdef ASMV match_init(); /* initialize the asm code */ #endif #endif } #ifndef FASTEST /* =========================================================================== * Set match_start to the longest match starting at the given string and * return its length. Matches shorter or equal to prev_length are discarded, * in which case the result is equal to prev_length and match_start is * garbage. * IN assertions: cur_match is the head of the hash chain for the current * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 * OUT assertion: the match length is not greater than s->lookahead. */ #ifndef ASMV /* For 80x86 and 680x0, an optimized version will be provided in match.asm or * match.S. The code will be functionally equivalent. */ local uInt longest_match(s, cur_match) deflate_state *s; IPos cur_match; /* current match */ { unsigned chain_length = s->max_chain_length;/* max hash chain length */ register Bytef *scan = s->window + s->strstart; /* current string */ register Bytef *match; /* matched string */ register int len; /* length of current match */ int best_len = (int)s->prev_length; /* best match length so far */ int nice_match = s->nice_match; /* stop if match long enough */ IPos limit = s->strstart > (IPos)MAX_DIST(s) ? s->strstart - (IPos)MAX_DIST(s) : NIL; /* Stop when cur_match becomes <= limit. To simplify the code, * we prevent matches with the string of window index 0. */ Posf *prev = s->prev; uInt wmask = s->w_mask; #ifdef UNALIGNED_OK /* Compare two bytes at a time. Note: this is not always beneficial. * Try with and without -DUNALIGNED_OK to check. */ register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; register ush scan_start = *(ushf*)scan; register ush scan_end = *(ushf*)(scan+best_len-1); #else register Bytef *strend = s->window + s->strstart + MAX_MATCH; register Byte scan_end1 = scan[best_len-1]; register Byte scan_end = scan[best_len]; #endif /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. * It is easy to get rid of this optimization if necessary. */ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); /* Do not waste too much time if we already have a good match: */ if (s->prev_length >= s->good_match) { chain_length >>= 2; } /* Do not look for matches beyond the end of the input. This is necessary * to make deflate deterministic. */ if ((uInt)nice_match > s->lookahead) nice_match = (int)s->lookahead; Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); do { Assert(cur_match < s->strstart, "no future"); match = s->window + cur_match; /* Skip to next match if the match length cannot increase * or if the match length is less than 2. Note that the checks below * for insufficient lookahead only occur occasionally for performance * reasons. Therefore uninitialized memory will be accessed, and * conditional jumps will be made that depend on those values. * However the length of the match is limited to the lookahead, so * the output of deflate is not affected by the uninitialized values. */ #if (defined(UNALIGNED_OK) && MAX_MATCH == 258) /* This code assumes sizeof(unsigned short) == 2. Do not use * UNALIGNED_OK if your compiler uses a different size. */ if (*(ushf*)(match+best_len-1) != scan_end || *(ushf*)match != scan_start) continue; /* It is not necessary to compare scan[2] and match[2] since they are * always equal when the other bytes match, given that the hash keys * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at * strstart+3, +5, ... up to strstart+257. We check for insufficient * lookahead only every 4th comparison; the 128th check will be made * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is * necessary to put more guard bytes at the end of the window, or * to check more often for insufficient lookahead. */ Assert(scan[2] == match[2], "scan[2]?"); scan++, match++; do { } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && *(ushf*)(scan+=2) == *(ushf*)(match+=2) && *(ushf*)(scan+=2) == *(ushf*)(match+=2) && *(ushf*)(scan+=2) == *(ushf*)(match+=2) && scan < strend); /* The funny "do {}" generates better code on most compilers */ /* Here, scan <= window+strstart+257 */ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); if (*scan == *match) scan++; len = (MAX_MATCH - 1) - (int)(strend-scan); scan = strend - (MAX_MATCH-1); #else /* UNALIGNED_OK */ if (match[best_len] != scan_end || match[best_len-1] != scan_end1 || *match != *scan || *++match != scan[1]) continue; /* The check at best_len-1 can be removed because it will be made * again later. (This heuristic is not always a win.) * It is not necessary to compare scan[2] and match[2] since they * are always equal when the other bytes match, given that * the hash keys are equal and that HASH_BITS >= 8. */ scan += 2, match++; Assert(*scan == *match, "match[2]?"); /* We check for insufficient lookahead only every 8th comparison; * the 256th check will be made at strstart+258. */ do { } while (*++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && scan < strend); Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); len = MAX_MATCH - (int)(strend - scan); scan = strend - MAX_MATCH; #endif /* UNALIGNED_OK */ if (len > best_len) { s->match_start = cur_match; best_len = len; if (len >= nice_match) break; #ifdef UNALIGNED_OK scan_end = *(ushf*)(scan+best_len-1); #else scan_end1 = scan[best_len-1]; scan_end = scan[best_len]; #endif } } while ((cur_match = prev[cur_match & wmask]) > limit && --chain_length != 0); if ((uInt)best_len <= s->lookahead) return (uInt)best_len; return s->lookahead; } #endif /* ASMV */ #else /* FASTEST */ /* --------------------------------------------------------------------------- * Optimized version for FASTEST only */ local uInt longest_match(s, cur_match) deflate_state *s; IPos cur_match; /* current match */ { register Bytef *scan = s->window + s->strstart; /* current string */ register Bytef *match; /* matched string */ register int len; /* length of current match */ register Bytef *strend = s->window + s->strstart + MAX_MATCH; /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. * It is easy to get rid of this optimization if necessary. */ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); Assert(cur_match < s->strstart, "no future"); match = s->window + cur_match; /* Return failure if the match length is less than 2: */ if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; /* The check at best_len-1 can be removed because it will be made * again later. (This heuristic is not always a win.) * It is not necessary to compare scan[2] and match[2] since they * are always equal when the other bytes match, given that * the hash keys are equal and that HASH_BITS >= 8. */ scan += 2, match += 2; Assert(*scan == *match, "match[2]?"); /* We check for insufficient lookahead only every 8th comparison; * the 256th check will be made at strstart+258. */ do { } while (*++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && scan < strend); Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); len = MAX_MATCH - (int)(strend - scan); if (len < MIN_MATCH) return MIN_MATCH - 1; s->match_start = cur_match; return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; } #endif /* FASTEST */ #ifdef ZLIB_DEBUG #define EQUAL 0 /* result of memcmp for equal strings */ /* =========================================================================== * Check that the match at match_start is indeed a match. */ local void check_match(s, start, match, length) deflate_state *s; IPos start, match; int length; { /* check that the match is indeed a match */ if (zmemcmp(s->window + match, s->window + start, length) != EQUAL) { fprintf(stderr, " start %u, match %u, length %d\n", start, match, length); do { fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); } while (--length != 0); z_error("invalid match"); } if (z_verbose > 1) { fprintf(stderr,"\\[%d,%d]", start-match, length); do { putc(s->window[start++], stderr); } while (--length != 0); } } #else # define check_match(s, start, match, length) #endif /* ZLIB_DEBUG */ /* =========================================================================== * Fill the window when the lookahead becomes insufficient. * Updates strstart and lookahead. * * IN assertion: lookahead < MIN_LOOKAHEAD * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD * At least one byte has been read, or avail_in == 0; reads are * performed for at least two bytes (required for the zip translate_eol * option -- not supported here). */ local void fill_window(s) deflate_state *s; { unsigned n; unsigned more; /* Amount of free space at the end of the window. */ uInt wsize = s->w_size; Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead"); do { more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); /* Deal with !@#$% 64K limit: */ if (sizeof(int) <= 2) { if (more == 0 && s->strstart == 0 && s->lookahead == 0) { more = wsize; } else if (more == (unsigned)(-1)) { /* Very unlikely, but possible on 16 bit machine if * strstart == 0 && lookahead == 1 (input done a byte at time) */ more--; } } /* If the window is almost full and there is insufficient lookahead, * move the upper half to the lower one to make room in the upper half. */ if (s->strstart >= wsize+MAX_DIST(s)) { zmemcpy(s->window, s->window+wsize, (unsigned)wsize - more); s->match_start -= wsize; s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ s->block_start -= (long) wsize; slide_hash(s); more += wsize; } if (s->strm->avail_in == 0) break; /* If there was no sliding: * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && * more == window_size - lookahead - strstart * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) * => more >= window_size - 2*WSIZE + 2 * In the BIG_MEM or MMAP case (not yet supported), * window_size == input_size + MIN_LOOKAHEAD && * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. * Otherwise, window_size == 2*WSIZE so more >= 2. * If there was sliding, more >= WSIZE. So in all cases, more >= 2. */ Assert(more >= 2, "more < 2"); n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); s->lookahead += n; /* Initialize the hash value now that we have some input: */ if (s->lookahead + s->insert >= MIN_MATCH) { uInt str = s->strstart - s->insert; s->ins_h = s->window[str]; UPDATE_HASH(s, s->ins_h, s->window[str + 1]); #if MIN_MATCH != 3 Call UPDATE_HASH() MIN_MATCH-3 more times #endif while (s->insert) { UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); #ifndef FASTEST s->prev[str & s->w_mask] = s->head[s->ins_h]; #endif s->head[s->ins_h] = (Pos)str; str++; s->insert--; if (s->lookahead + s->insert < MIN_MATCH) break; } } /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, * but this is not important since only literal bytes will be emitted. */ } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); /* If the WIN_INIT bytes after the end of the current data have never been * written, then zero those bytes in order to avoid memory check reports of * the use of uninitialized (or uninitialised as Julian writes) bytes by * the longest match routines. Update the high water mark for the next * time through here. WIN_INIT is set to MAX_MATCH since the longest match * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead. */ if (s->high_water < s->window_size) { ulg curr = s->strstart + (ulg)(s->lookahead); ulg init; if (s->high_water < curr) { /* Previous high water mark below current data -- zero WIN_INIT * bytes or up to end of window, whichever is less. */ init = s->window_size - curr; if (init > WIN_INIT) init = WIN_INIT; zmemzero(s->window + curr, (unsigned)init); s->high_water = curr + init; } else if (s->high_water < (ulg)curr + WIN_INIT) { /* High water mark at or above current data, but below current data * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up * to end of window, whichever is less. */ init = (ulg)curr + WIN_INIT - s->high_water; if (init > s->window_size - s->high_water) init = s->window_size - s->high_water; zmemzero(s->window + s->high_water, (unsigned)init); s->high_water += init; } } Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD, "not enough room for search"); } /* =========================================================================== * Flush the current block, with given end-of-file flag. * IN assertion: strstart is set to the end of the current match. */ #define FLUSH_BLOCK_ONLY(s, last) { \ _tr_flush_block(s, (s->block_start >= 0L ? \ (charf *)&s->window[(unsigned)s->block_start] : \ (charf *)Z_NULL), \ (ulg)((long)s->strstart - s->block_start), \ (last)); \ s->block_start = s->strstart; \ flush_pending(s->strm); \ Tracev((stderr,"[FLUSH]")); \ } /* Same but force premature exit if necessary. */ #define FLUSH_BLOCK(s, last) { \ FLUSH_BLOCK_ONLY(s, last); \ if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \ } /* Maximum stored block length in deflate format (not including header). */ #define MAX_STORED 65535 +#if !defined(MIN) /* Minimum of a and b. */ #define MIN(a, b) ((a) > (b) ? (b) : (a)) +#endif /* =========================================================================== * Copy without compression as much as possible from the input stream, return * the current block state. * * In case deflateParams() is used to later switch to a non-zero compression * level, s->matches (otherwise unused when storing) keeps track of the number * of hash table slides to perform. If s->matches is 1, then one hash table * slide will be done when switching. If s->matches is 2, the maximum value * allowed here, then the hash table will be cleared, since two or more slides * is the same as a clear. * * deflate_stored() is written to minimize the number of times an input byte is * copied. It is most efficient with large input and output buffers, which * maximizes the opportunites to have a single copy from next_in to next_out. */ local block_state deflate_stored(s, flush) deflate_state *s; int flush; { /* Smallest worthy block size when not flushing or finishing. By default * this is 32K. This can be as small as 507 bytes for memLevel == 1. For * large input and output buffers, the stored block size will be larger. */ unsigned min_block = MIN(s->pending_buf_size - 5, s->w_size); /* Copy as many min_block or larger stored blocks directly to next_out as * possible. If flushing, copy the remaining available input to next_out as * stored blocks, if there is enough space. */ unsigned len, left, have, last = 0; unsigned used = s->strm->avail_in; do { /* Set len to the maximum size block that we can copy directly with the * available input data and output space. Set left to how much of that * would be copied from what's left in the window. */ len = MAX_STORED; /* maximum deflate stored block length */ have = (s->bi_valid + 42) >> 3; /* number of header bytes */ if (s->strm->avail_out < have) /* need room for header */ break; /* maximum stored block length that will fit in avail_out: */ have = s->strm->avail_out - have; left = s->strstart - s->block_start; /* bytes left in window */ if (len > (ulg)left + s->strm->avail_in) len = left + s->strm->avail_in; /* limit len to the input */ if (len > have) len = have; /* limit len to the output */ /* If the stored block would be less than min_block in length, or if * unable to copy all of the available input when flushing, then try * copying to the window and the pending buffer instead. Also don't * write an empty block when flushing -- deflate() does that. */ if (len < min_block && ((len == 0 && flush != Z_FINISH) || flush == Z_NO_FLUSH || len != left + s->strm->avail_in)) break; /* Make a dummy stored block in pending to get the header bytes, * including any pending bits. This also updates the debugging counts. */ last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0; _tr_stored_block(s, (char *)0, 0L, last); /* Replace the lengths in the dummy stored block with len. */ s->pending_buf[s->pending - 4] = len; s->pending_buf[s->pending - 3] = len >> 8; s->pending_buf[s->pending - 2] = ~len; s->pending_buf[s->pending - 1] = ~len >> 8; /* Write the stored block header bytes. */ flush_pending(s->strm); #ifdef ZLIB_DEBUG /* Update debugging counts for the data about to be copied. */ s->compressed_len += len << 3; s->bits_sent += len << 3; #endif /* Copy uncompressed bytes from the window to next_out. */ if (left) { if (left > len) left = len; zmemcpy(s->strm->next_out, s->window + s->block_start, left); s->strm->next_out += left; s->strm->avail_out -= left; s->strm->total_out += left; s->block_start += left; len -= left; } /* Copy uncompressed bytes directly from next_in to next_out, updating * the check value. */ if (len) { read_buf(s->strm, s->strm->next_out, len); s->strm->next_out += len; s->strm->avail_out -= len; s->strm->total_out += len; } } while (last == 0); /* Update the sliding window with the last s->w_size bytes of the copied * data, or append all of the copied data to the existing window if less * than s->w_size bytes were copied. Also update the number of bytes to * insert in the hash tables, in the event that deflateParams() switches to * a non-zero compression level. */ used -= s->strm->avail_in; /* number of input bytes directly copied */ if (used) { /* If any input was used, then no unused input remains in the window, * therefore s->block_start == s->strstart. */ if (used >= s->w_size) { /* supplant the previous history */ s->matches = 2; /* clear hash */ zmemcpy(s->window, s->strm->next_in - s->w_size, s->w_size); s->strstart = s->w_size; } else { if (s->window_size - s->strstart <= used) { /* Slide the window down. */ s->strstart -= s->w_size; zmemcpy(s->window, s->window + s->w_size, s->strstart); if (s->matches < 2) s->matches++; /* add a pending slide_hash() */ } zmemcpy(s->window + s->strstart, s->strm->next_in - used, used); s->strstart += used; } s->block_start = s->strstart; s->insert += MIN(used, s->w_size - s->insert); } if (s->high_water < s->strstart) s->high_water = s->strstart; /* If the last block was written to next_out, then done. */ if (last) return finish_done; /* If flushing and all input has been consumed, then done. */ if (flush != Z_NO_FLUSH && flush != Z_FINISH && s->strm->avail_in == 0 && (long)s->strstart == s->block_start) return block_done; /* Fill the window with any remaining input. */ have = s->window_size - s->strstart - 1; if (s->strm->avail_in > have && s->block_start >= (long)s->w_size) { /* Slide the window down. */ s->block_start -= s->w_size; s->strstart -= s->w_size; zmemcpy(s->window, s->window + s->w_size, s->strstart); if (s->matches < 2) s->matches++; /* add a pending slide_hash() */ have += s->w_size; /* more space now */ } if (have > s->strm->avail_in) have = s->strm->avail_in; if (have) { read_buf(s->strm, s->window + s->strstart, have); s->strstart += have; } if (s->high_water < s->strstart) s->high_water = s->strstart; /* There was not enough avail_out to write a complete worthy or flushed * stored block to next_out. Write a stored block to pending instead, if we * have enough input for a worthy block, or if flushing and there is enough * room for the remaining input as a stored block in the pending buffer. */ have = (s->bi_valid + 42) >> 3; /* number of header bytes */ /* maximum stored block length that will fit in pending: */ have = MIN(s->pending_buf_size - have, MAX_STORED); min_block = MIN(have, s->w_size); left = s->strstart - s->block_start; if (left >= min_block || ((left || flush == Z_FINISH) && flush != Z_NO_FLUSH && s->strm->avail_in == 0 && left <= have)) { len = MIN(left, have); last = flush == Z_FINISH && s->strm->avail_in == 0 && len == left ? 1 : 0; _tr_stored_block(s, (charf *)s->window + s->block_start, len, last); s->block_start += len; flush_pending(s->strm); } /* We've done all we can with the available input and output. */ return last ? finish_started : need_more; } /* =========================================================================== * Compress as much as possible from the input stream, return the current * block state. * This function does not perform lazy evaluation of matches and inserts * new strings in the dictionary only for unmatched strings or for short * matches. It is used only for the fast compression options. */ local block_state deflate_fast(s, flush) deflate_state *s; int flush; { IPos hash_head; /* head of the hash chain */ int bflush; /* set if current block must be flushed */ for (;;) { /* Make sure that we always have enough lookahead, except * at the end of the input file. We need MAX_MATCH bytes * for the next match, plus MIN_MATCH bytes to insert the * string following the next match. */ if (s->lookahead < MIN_LOOKAHEAD) { fill_window(s); if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { return need_more; } if (s->lookahead == 0) break; /* flush the current block */ } /* Insert the string window[strstart .. strstart+2] in the * dictionary, and set hash_head to the head of the hash chain: */ hash_head = NIL; if (s->lookahead >= MIN_MATCH) { INSERT_STRING(s, s->strstart, hash_head); } /* Find the longest match, discarding those <= prev_length. * At this point we have always match_length < MIN_MATCH */ if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { /* To simplify the code, we prevent matches with the string * of window index 0 (in particular we have to avoid a match * of the string with itself at the start of the input file). */ s->match_length = longest_match (s, hash_head); /* longest_match() sets match_start */ } if (s->match_length >= MIN_MATCH) { check_match(s, s->strstart, s->match_start, s->match_length); _tr_tally_dist(s, s->strstart - s->match_start, s->match_length - MIN_MATCH, bflush); s->lookahead -= s->match_length; /* Insert new strings in the hash table only if the match length * is not too large. This saves time but degrades compression. */ #ifndef FASTEST if (s->match_length <= s->max_insert_length && s->lookahead >= MIN_MATCH) { s->match_length--; /* string at strstart already in table */ do { s->strstart++; INSERT_STRING(s, s->strstart, hash_head); /* strstart never exceeds WSIZE-MAX_MATCH, so there are * always MIN_MATCH bytes ahead. */ } while (--s->match_length != 0); s->strstart++; } else #endif { s->strstart += s->match_length; s->match_length = 0; s->ins_h = s->window[s->strstart]; UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); #if MIN_MATCH != 3 Call UPDATE_HASH() MIN_MATCH-3 more times #endif /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not * matter since it will be recomputed at next deflate call. */ } } else { /* No match, output a literal byte */ Tracevv((stderr,"%c", s->window[s->strstart])); _tr_tally_lit (s, s->window[s->strstart], bflush); s->lookahead--; s->strstart++; } if (bflush) FLUSH_BLOCK(s, 0); } s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; if (flush == Z_FINISH) { FLUSH_BLOCK(s, 1); return finish_done; } if (s->last_lit) FLUSH_BLOCK(s, 0); return block_done; } #ifndef FASTEST /* =========================================================================== * Same as above, but achieves better compression. We use a lazy * evaluation for matches: a match is finally adopted only if there is * no better match at the next window position. */ local block_state deflate_slow(s, flush) deflate_state *s; int flush; { IPos hash_head; /* head of hash chain */ int bflush; /* set if current block must be flushed */ /* Process the input block. */ for (;;) { /* Make sure that we always have enough lookahead, except * at the end of the input file. We need MAX_MATCH bytes * for the next match, plus MIN_MATCH bytes to insert the * string following the next match. */ if (s->lookahead < MIN_LOOKAHEAD) { fill_window(s); if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { return need_more; } if (s->lookahead == 0) break; /* flush the current block */ } /* Insert the string window[strstart .. strstart+2] in the * dictionary, and set hash_head to the head of the hash chain: */ hash_head = NIL; if (s->lookahead >= MIN_MATCH) { INSERT_STRING(s, s->strstart, hash_head); } /* Find the longest match, discarding those <= prev_length. */ s->prev_length = s->match_length, s->prev_match = s->match_start; s->match_length = MIN_MATCH-1; if (hash_head != NIL && s->prev_length < s->max_lazy_match && s->strstart - hash_head <= MAX_DIST(s)) { /* To simplify the code, we prevent matches with the string * of window index 0 (in particular we have to avoid a match * of the string with itself at the start of the input file). */ s->match_length = longest_match (s, hash_head); /* longest_match() sets match_start */ if (s->match_length <= 5 && (s->strategy == Z_FILTERED #if TOO_FAR <= 32767 || (s->match_length == MIN_MATCH && s->strstart - s->match_start > TOO_FAR) #endif )) { /* If prev_match is also MIN_MATCH, match_start is garbage * but we will ignore the current match anyway. */ s->match_length = MIN_MATCH-1; } } /* If there was a match at the previous step and the current * match is not better, output the previous match: */ if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; /* Do not insert strings in hash table beyond this. */ check_match(s, s->strstart-1, s->prev_match, s->prev_length); _tr_tally_dist(s, s->strstart -1 - s->prev_match, s->prev_length - MIN_MATCH, bflush); /* Insert in hash table all strings up to the end of the match. * strstart-1 and strstart are already inserted. If there is not * enough lookahead, the last two strings are not inserted in * the hash table. */ s->lookahead -= s->prev_length-1; s->prev_length -= 2; do { if (++s->strstart <= max_insert) { INSERT_STRING(s, s->strstart, hash_head); } } while (--s->prev_length != 0); s->match_available = 0; s->match_length = MIN_MATCH-1; s->strstart++; if (bflush) FLUSH_BLOCK(s, 0); } else if (s->match_available) { /* If there was no match at the previous position, output a * single literal. If there was a match but the current match * is longer, truncate the previous match to a single literal. */ Tracevv((stderr,"%c", s->window[s->strstart-1])); _tr_tally_lit(s, s->window[s->strstart-1], bflush); if (bflush) { FLUSH_BLOCK_ONLY(s, 0); } s->strstart++; s->lookahead--; if (s->strm->avail_out == 0) return need_more; } else { /* There is no previous match to compare with, wait for * the next step to decide. */ s->match_available = 1; s->strstart++; s->lookahead--; } } Assert (flush != Z_NO_FLUSH, "no flush?"); if (s->match_available) { Tracevv((stderr,"%c", s->window[s->strstart-1])); _tr_tally_lit(s, s->window[s->strstart-1], bflush); s->match_available = 0; } s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; if (flush == Z_FINISH) { FLUSH_BLOCK(s, 1); return finish_done; } if (s->last_lit) FLUSH_BLOCK(s, 0); return block_done; } #endif /* FASTEST */ /* =========================================================================== * For Z_RLE, simply look for runs of bytes, generate matches only of distance * one. Do not maintain a hash table. (It will be regenerated if this run of * deflate switches away from Z_RLE.) */ local block_state deflate_rle(s, flush) deflate_state *s; int flush; { int bflush; /* set if current block must be flushed */ uInt prev; /* byte at distance one to match */ Bytef *scan, *strend; /* scan goes up to strend for length of run */ for (;;) { /* Make sure that we always have enough lookahead, except * at the end of the input file. We need MAX_MATCH bytes * for the longest run, plus one for the unrolled loop. */ if (s->lookahead <= MAX_MATCH) { fill_window(s); if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) { return need_more; } if (s->lookahead == 0) break; /* flush the current block */ } /* See how many times the previous byte repeats */ s->match_length = 0; if (s->lookahead >= MIN_MATCH && s->strstart > 0) { scan = s->window + s->strstart - 1; prev = *scan; if (prev == *++scan && prev == *++scan && prev == *++scan) { strend = s->window + s->strstart + MAX_MATCH; do { } while (prev == *++scan && prev == *++scan && prev == *++scan && prev == *++scan && prev == *++scan && prev == *++scan && prev == *++scan && prev == *++scan && scan < strend); s->match_length = MAX_MATCH - (uInt)(strend - scan); if (s->match_length > s->lookahead) s->match_length = s->lookahead; } Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan"); } /* Emit match if have run of MIN_MATCH or longer, else emit literal */ if (s->match_length >= MIN_MATCH) { check_match(s, s->strstart, s->strstart - 1, s->match_length); _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush); s->lookahead -= s->match_length; s->strstart += s->match_length; s->match_length = 0; } else { /* No match, output a literal byte */ Tracevv((stderr,"%c", s->window[s->strstart])); _tr_tally_lit (s, s->window[s->strstart], bflush); s->lookahead--; s->strstart++; } if (bflush) FLUSH_BLOCK(s, 0); } s->insert = 0; if (flush == Z_FINISH) { FLUSH_BLOCK(s, 1); return finish_done; } if (s->last_lit) FLUSH_BLOCK(s, 0); return block_done; } /* =========================================================================== * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table. * (It will be regenerated if this run of deflate switches away from Huffman.) */ local block_state deflate_huff(s, flush) deflate_state *s; int flush; { int bflush; /* set if current block must be flushed */ for (;;) { /* Make sure that we have a literal to write. */ if (s->lookahead == 0) { fill_window(s); if (s->lookahead == 0) { if (flush == Z_NO_FLUSH) return need_more; break; /* flush the current block */ } } /* Output a literal byte */ s->match_length = 0; Tracevv((stderr,"%c", s->window[s->strstart])); _tr_tally_lit (s, s->window[s->strstart], bflush); s->lookahead--; s->strstart++; if (bflush) FLUSH_BLOCK(s, 0); } s->insert = 0; if (flush == Z_FINISH) { FLUSH_BLOCK(s, 1); return finish_done; } if (s->last_lit) FLUSH_BLOCK(s, 0); return block_done; } Index: head/sys/contrib/zlib/zconf.h =================================================================== --- head/sys/contrib/zlib/zconf.h (revision 350495) +++ head/sys/contrib/zlib/zconf.h (revision 350496) @@ -1,542 +1,545 @@ /* zconf.h -- configuration of the zlib compression library * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* @(#) $FreeBSD$ */ #ifndef ZCONF_H #define ZCONF_H /* * If you *really* need a unique prefix for all types and library functions, * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. * Even better than compiling with -DZ_PREFIX would be to use configure to set * this permanently in zconf.h using "./configure --zprefix". */ #ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ # define Z_PREFIX_SET /* all linked symbols and init macros */ # define _dist_code z__dist_code # define _length_code z__length_code # define _tr_align z__tr_align # define _tr_flush_bits z__tr_flush_bits # define _tr_flush_block z__tr_flush_block # define _tr_init z__tr_init # define _tr_stored_block z__tr_stored_block # define _tr_tally z__tr_tally # define adler32 z_adler32 # define adler32_combine z_adler32_combine # define adler32_combine64 z_adler32_combine64 # define adler32_z z_adler32_z # ifndef Z_SOLO # define compress z_compress # define compress2 z_compress2 # define compressBound z_compressBound # endif # define crc32 z_crc32 # define crc32_combine z_crc32_combine # define crc32_combine64 z_crc32_combine64 # define crc32_z z_crc32_z # define deflate z_deflate # define deflateBound z_deflateBound # define deflateCopy z_deflateCopy # define deflateEnd z_deflateEnd # define deflateGetDictionary z_deflateGetDictionary # define deflateInit z_deflateInit # define deflateInit2 z_deflateInit2 # define deflateInit2_ z_deflateInit2_ # define deflateInit_ z_deflateInit_ # define deflateParams z_deflateParams # define deflatePending z_deflatePending # define deflatePrime z_deflatePrime # define deflateReset z_deflateReset # define deflateResetKeep z_deflateResetKeep # define deflateSetDictionary z_deflateSetDictionary # define deflateSetHeader z_deflateSetHeader # define deflateTune z_deflateTune # define deflate_copyright z_deflate_copyright # define get_crc_table z_get_crc_table # ifndef Z_SOLO # define gz_error z_gz_error # define gz_intmax z_gz_intmax # define gz_strwinerror z_gz_strwinerror # define gzbuffer z_gzbuffer # define gzclearerr z_gzclearerr # define gzclose z_gzclose # define gzclose_r z_gzclose_r # define gzclose_w z_gzclose_w # define gzdirect z_gzdirect # define gzdopen z_gzdopen # define gzeof z_gzeof # define gzerror z_gzerror # define gzflush z_gzflush # define gzfread z_gzfread # define gzfwrite z_gzfwrite # define gzgetc z_gzgetc # define gzgetc_ z_gzgetc_ # define gzgets z_gzgets # define gzoffset z_gzoffset # define gzoffset64 z_gzoffset64 # define gzopen z_gzopen # define gzopen64 z_gzopen64 # ifdef _WIN32 # define gzopen_w z_gzopen_w # endif # define gzprintf z_gzprintf # define gzputc z_gzputc # define gzputs z_gzputs # define gzread z_gzread # define gzrewind z_gzrewind # define gzseek z_gzseek # define gzseek64 z_gzseek64 # define gzsetparams z_gzsetparams # define gztell z_gztell # define gztell64 z_gztell64 # define gzungetc z_gzungetc # define gzvprintf z_gzvprintf # define gzwrite z_gzwrite # endif # define inflate z_inflate # define inflateBack z_inflateBack # define inflateBackEnd z_inflateBackEnd # define inflateBackInit z_inflateBackInit # define inflateBackInit_ z_inflateBackInit_ # define inflateCodesUsed z_inflateCodesUsed # define inflateCopy z_inflateCopy # define inflateEnd z_inflateEnd # define inflateGetDictionary z_inflateGetDictionary # define inflateGetHeader z_inflateGetHeader # define inflateInit z_inflateInit # define inflateInit2 z_inflateInit2 # define inflateInit2_ z_inflateInit2_ # define inflateInit_ z_inflateInit_ # define inflateMark z_inflateMark # define inflatePrime z_inflatePrime # define inflateReset z_inflateReset # define inflateReset2 z_inflateReset2 # define inflateResetKeep z_inflateResetKeep # define inflateSetDictionary z_inflateSetDictionary # define inflateSync z_inflateSync # define inflateSyncPoint z_inflateSyncPoint # define inflateUndermine z_inflateUndermine # define inflateValidate z_inflateValidate # define inflate_copyright z_inflate_copyright # define inflate_fast z_inflate_fast # define inflate_table z_inflate_table # ifndef Z_SOLO # define uncompress z_uncompress # define uncompress2 z_uncompress2 # endif # define zError z_zError # ifndef Z_SOLO # define zcalloc z_zcalloc # define zcfree z_zcfree # endif # define zlibCompileFlags z_zlibCompileFlags # define zlibVersion z_zlibVersion /* all zlib typedefs in zlib.h and zconf.h */ # define Byte z_Byte # define Bytef z_Bytef # define alloc_func z_alloc_func # define charf z_charf # define free_func z_free_func # ifndef Z_SOLO # define gzFile z_gzFile # endif # define gz_header z_gz_header # define gz_headerp z_gz_headerp # define in_func z_in_func # define intf z_intf # define out_func z_out_func # define uInt z_uInt # define uIntf z_uIntf # define uLong z_uLong # define uLongf z_uLongf # define voidp z_voidp # define voidpc z_voidpc # define voidpf z_voidpf /* all zlib structs in zlib.h and zconf.h */ # define gz_header_s z_gz_header_s # define internal_state z_internal_state #endif #if defined(__MSDOS__) && !defined(MSDOS) # define MSDOS #endif #if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) # define OS2 #endif #if defined(_WINDOWS) && !defined(WINDOWS) # define WINDOWS #endif #if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) # ifndef WIN32 # define WIN32 # endif #endif #if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) # if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) # ifndef SYS16BIT # define SYS16BIT # endif # endif #endif /* * Compile with -DMAXSEG_64K if the alloc function cannot allocate more * than 64k bytes at a time (needed on systems with 16-bit int). */ #ifdef SYS16BIT # define MAXSEG_64K #endif #ifdef MSDOS # define UNALIGNED_OK #endif #ifdef __STDC_VERSION__ # ifndef STDC # define STDC # endif # if __STDC_VERSION__ >= 199901L # ifndef STDC99 # define STDC99 # endif # endif #endif #if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) # define STDC #endif #if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) # define STDC #endif #if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) # define STDC #endif #if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) # define STDC #endif #if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ # define STDC #endif #ifndef STDC # ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ # define const /* note: need a more gentle solution here */ # endif #endif #if defined(ZLIB_CONST) && !defined(z_const) # define z_const const #else # define z_const #endif #ifdef Z_SOLO typedef unsigned long z_size_t; #else # define z_longlong long long # if defined(NO_SIZE_T) typedef unsigned NO_SIZE_T z_size_t; # elif defined(STDC) # include typedef size_t z_size_t; # else typedef unsigned long z_size_t; # endif # undef z_longlong #endif /* Maximum value for memLevel in deflateInit2 */ #ifndef MAX_MEM_LEVEL # ifdef MAXSEG_64K # define MAX_MEM_LEVEL 8 # else # define MAX_MEM_LEVEL 9 # endif #endif /* Maximum value for windowBits in deflateInit2 and inflateInit2. * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files * created by gzip. (Files created by minigzip can still be extracted by * gzip.) */ #ifndef MAX_WBITS # define MAX_WBITS 15 /* 32K LZ77 window */ #endif /* The memory requirements for deflate are (in bytes): (1 << (windowBits+2)) + (1 << (memLevel+9)) that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) plus a few kilobytes for small objects. For example, if you want to reduce the default memory requirements from 256K to 128K, compile with make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" Of course this will generally degrade compression (there's no free lunch). The memory requirements for inflate are (in bytes) 1 << windowBits that is, 32K for windowBits=15 (default value) plus about 7 kilobytes for small objects. */ /* Type declarations */ #ifndef OF /* function prototypes */ # ifdef STDC # define OF(args) args # else # define OF(args) () # endif #endif #ifndef Z_ARG /* function prototypes for stdarg */ # if defined(STDC) || defined(Z_HAVE_STDARG_H) # define Z_ARG(args) args # else # define Z_ARG(args) () # endif #endif /* The following definitions for FAR are needed only for MSDOS mixed * model programming (small or medium model with some far allocations). * This was tested only with MSC; for other MSDOS compilers you may have * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, * just define FAR to be empty. */ #ifdef SYS16BIT # if defined(M_I86SM) || defined(M_I86MM) /* MSC small or medium model */ # define SMALL_MEDIUM # ifdef _MSC_VER # define FAR _far # else # define FAR far # endif # endif # if (defined(__SMALL__) || defined(__MEDIUM__)) /* Turbo C small or medium model */ # define SMALL_MEDIUM # ifdef __BORLANDC__ # define FAR _far # else # define FAR far # endif # endif #endif #if defined(WINDOWS) || defined(WIN32) /* If building or using zlib as a DLL, define ZLIB_DLL. * This is not mandatory, but it offers a little performance increase. */ # ifdef ZLIB_DLL # if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) # ifdef ZLIB_INTERNAL # define ZEXTERN extern __declspec(dllexport) # else # define ZEXTERN extern __declspec(dllimport) # endif # endif # endif /* ZLIB_DLL */ /* If building or using zlib with the WINAPI/WINAPIV calling convention, * define ZLIB_WINAPI. * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. */ # ifdef ZLIB_WINAPI # ifdef FAR # undef FAR # endif # include /* No need for _export, use ZLIB.DEF instead. */ /* For complete Windows compatibility, use WINAPI, not __stdcall. */ # define ZEXPORT WINAPI # ifdef WIN32 # define ZEXPORTVA WINAPIV # else # define ZEXPORTVA FAR CDECL # endif # endif #endif #if defined (__BEOS__) # ifdef ZLIB_DLL # ifdef ZLIB_INTERNAL # define ZEXPORT __declspec(dllexport) # define ZEXPORTVA __declspec(dllexport) # else # define ZEXPORT __declspec(dllimport) # define ZEXPORTVA __declspec(dllimport) # endif # endif #endif #ifndef ZEXTERN # define ZEXTERN extern #endif #ifndef ZEXPORT # define ZEXPORT #endif #ifndef ZEXPORTVA # define ZEXPORTVA #endif #ifndef FAR # define FAR #endif #if !defined(__MACTYPES__) typedef unsigned char Byte; /* 8 bits */ #endif typedef unsigned int uInt; /* 16 bits or more */ typedef unsigned long uLong; /* 32 bits or more */ #ifdef SMALL_MEDIUM /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ # define Bytef Byte FAR #else typedef Byte FAR Bytef; #endif typedef char FAR charf; typedef int FAR intf; typedef uInt FAR uIntf; typedef uLong FAR uLongf; #ifdef STDC typedef void const *voidpc; typedef void FAR *voidpf; typedef void *voidp; #else typedef Byte const *voidpc; typedef Byte FAR *voidpf; typedef Byte *voidp; #endif #if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) # include # if (UINT_MAX == 0xffffffffUL) # define Z_U4 unsigned # elif (ULONG_MAX == 0xffffffffUL) # define Z_U4 unsigned long # elif (USHRT_MAX == 0xffffffffUL) # define Z_U4 unsigned short # endif #endif #ifdef Z_U4 typedef Z_U4 z_crc_t; #else typedef unsigned long z_crc_t; #endif #if 0 /* was set to #if 0 by ./configure */ # define Z_HAVE_UNISTD_H #endif #ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ # define Z_HAVE_STDARG_H #endif #ifdef STDC # ifndef Z_SOLO # include /* for off_t */ # endif #endif #if defined(STDC) || defined(Z_HAVE_STDARG_H) # ifndef Z_SOLO # include /* for va_list */ # endif #endif #ifdef _WIN32 # ifndef Z_SOLO # include /* for wchar_t */ # endif #endif /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even * though the former does not conform to the LFS document), but considering * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as * equivalently requesting no 64-bit operations */ #if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 # undef _LARGEFILE64_SOURCE #endif #if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) # define Z_HAVE_UNISTD_H #endif #ifndef Z_SOLO # if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) # include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ # ifdef VMS # include /* for off_t */ # endif # ifndef z_off_t # define z_off_t off_t # endif # endif #endif #if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 # define Z_LFS64 #endif #if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) # define Z_LARGE64 #endif #if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) # define Z_WANT64 #endif #if !defined(SEEK_SET) && !defined(Z_SOLO) # define SEEK_SET 0 /* Seek from beginning of file. */ # define SEEK_CUR 1 /* Seek from current position. */ # define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ #endif /* * This is hard-configured for FreeBSD. */ +#ifdef Z_SOLO +# include /* for off_t */ +#endif #define z_off_t off_t #ifndef _FILE_OFFSET_BITS #define _FILE_OFFSET_BITS 64 #endif #ifndef z_off_t # define z_off_t long #endif #if !defined(_WIN32) && defined(Z_LARGE64) # define z_off64_t off64_t #else # if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) # define z_off64_t __int64 # else # define z_off64_t z_off_t # endif #endif /* MVS linker does not support external names larger than 8 bytes */ #if defined(__MVS__) #pragma map(deflateInit_,"DEIN") #pragma map(deflateInit2_,"DEIN2") #pragma map(deflateEnd,"DEEND") #pragma map(deflateBound,"DEBND") #pragma map(inflateInit_,"ININ") #pragma map(inflateInit2_,"ININ2") #pragma map(inflateEnd,"INEND") #pragma map(inflateSync,"INSY") #pragma map(inflateSetDictionary,"INSEDI") #pragma map(compressBound,"CMBND") #pragma map(inflate_table,"INTABL") #pragma map(inflate_fast,"INFA") #pragma map(inflate_copyright,"INCOPY") #endif #endif /* ZCONF_H */ Index: head/sys/contrib/zlib/zutil.h =================================================================== --- head/sys/contrib/zlib/zutil.h (revision 350495) +++ head/sys/contrib/zlib/zutil.h (revision 350496) @@ -1,271 +1,274 @@ /* zutil.h -- internal interface and configuration of the compression library * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* WARNING: this file should *not* be used by applications. It is part of the implementation of the compression library and is subject to change. Applications should only use zlib.h. */ /* @(#) $Id$ */ #ifndef ZUTIL_H #define ZUTIL_H #ifdef HAVE_HIDDEN # define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) #else # define ZLIB_INTERNAL #endif #include "zlib.h" #if defined(STDC) && !defined(Z_SOLO) # if !(defined(_WIN32_WCE) && defined(_MSC_VER)) # include # endif # include # include #endif #ifdef Z_SOLO +#ifndef _PTRDIFF_T_DECLARED typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */ +#define _PTRDIFF_T_DECLARED +#endif #endif #ifndef local # define local static #endif /* since "static" is used to mean two completely different things in C, we define "local" for the non-static meaning of "static", for readability (compile with -Dlocal if your debugger can't find static symbols) */ typedef unsigned char uch; typedef uch FAR uchf; typedef unsigned short ush; typedef ush FAR ushf; typedef unsigned long ulg; extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ /* (size given to avoid silly warnings with Visual C++) */ #define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] #define ERR_RETURN(strm,err) \ return (strm->msg = ERR_MSG(err), (err)) /* To be used only when the state is known to be valid */ /* common constants */ #ifndef DEF_WBITS # define DEF_WBITS MAX_WBITS #endif /* default windowBits for decompression. MAX_WBITS is for compression only */ #if MAX_MEM_LEVEL >= 8 # define DEF_MEM_LEVEL 8 #else # define DEF_MEM_LEVEL MAX_MEM_LEVEL #endif /* default memLevel */ #define STORED_BLOCK 0 #define STATIC_TREES 1 #define DYN_TREES 2 /* The three kinds of block type */ #define MIN_MATCH 3 #define MAX_MATCH 258 /* The minimum and maximum match lengths */ #define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ /* target dependencies */ #if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) # define OS_CODE 0x00 # ifndef Z_SOLO # if defined(__TURBOC__) || defined(__BORLANDC__) # if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) /* Allow compilation with ANSI keywords only enabled */ void _Cdecl farfree( void *block ); void *_Cdecl farmalloc( unsigned long nbytes ); # else # include # endif # else /* MSC or DJGPP */ # include # endif # endif #endif #ifdef AMIGA # define OS_CODE 1 #endif #if defined(VAXC) || defined(VMS) # define OS_CODE 2 # define F_OPEN(name, mode) \ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") #endif #ifdef __370__ # if __TARGET_LIB__ < 0x20000000 # define OS_CODE 4 # elif __TARGET_LIB__ < 0x40000000 # define OS_CODE 11 # else # define OS_CODE 8 # endif #endif #if defined(ATARI) || defined(atarist) # define OS_CODE 5 #endif #ifdef OS2 # define OS_CODE 6 # if defined(M_I86) && !defined(Z_SOLO) # include # endif #endif #if defined(MACOS) || defined(TARGET_OS_MAC) # define OS_CODE 7 # ifndef Z_SOLO # if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os # include /* for fdopen */ # else # ifndef fdopen # define fdopen(fd,mode) NULL /* No fdopen() */ # endif # endif # endif #endif #ifdef __acorn # define OS_CODE 13 #endif #if defined(WIN32) && !defined(__CYGWIN__) # define OS_CODE 10 #endif #ifdef _BEOS_ # define OS_CODE 16 #endif #ifdef __TOS_OS400__ # define OS_CODE 18 #endif #ifdef __APPLE__ # define OS_CODE 19 #endif #if defined(_BEOS_) || defined(RISCOS) # define fdopen(fd,mode) NULL /* No fdopen() */ #endif #if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX # if defined(_WIN32_WCE) # define fdopen(fd,mode) NULL /* No fdopen() */ # ifndef _PTRDIFF_T_DEFINED typedef int ptrdiff_t; # define _PTRDIFF_T_DEFINED # endif # else # define fdopen(fd,type) _fdopen(fd,type) # endif #endif #if defined(__BORLANDC__) && !defined(MSDOS) #pragma warn -8004 #pragma warn -8008 #pragma warn -8066 #endif /* provide prototypes for these when building zlib without LFS */ #if !defined(_WIN32) && \ (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0) ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); #endif /* common defaults */ #ifndef OS_CODE # define OS_CODE 3 /* assume Unix */ #endif #ifndef F_OPEN # define F_OPEN(name, mode) fopen((name), (mode)) #endif /* functions */ #if defined(pyr) || defined(Z_SOLO) # define NO_MEMCPY #endif #if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) /* Use our own functions for small and medium model with MSC <= 5.0. * You may have to use the same strategy for Borland C (untested). * The __SC__ check is for Symantec. */ # define NO_MEMCPY #endif #if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) # define HAVE_MEMCPY #endif #ifdef HAVE_MEMCPY # ifdef SMALL_MEDIUM /* MSDOS small or medium model */ # define zmemcpy _fmemcpy # define zmemcmp _fmemcmp # define zmemzero(dest, len) _fmemset(dest, 0, len) # else # define zmemcpy memcpy # define zmemcmp memcmp # define zmemzero(dest, len) memset(dest, 0, len) # endif #else void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len)); #endif /* Diagnostic functions */ #ifdef ZLIB_DEBUG # include extern int ZLIB_INTERNAL z_verbose; extern void ZLIB_INTERNAL z_error OF((char *m)); # define Assert(cond,msg) {if(!(cond)) z_error(msg);} # define Trace(x) {if (z_verbose>=0) fprintf x ;} # define Tracev(x) {if (z_verbose>0) fprintf x ;} # define Tracevv(x) {if (z_verbose>1) fprintf x ;} # define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} # define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} #else # define Assert(cond,msg) # define Trace(x) # define Tracev(x) # define Tracevv(x) # define Tracec(c,x) # define Tracecv(c,x) #endif #ifndef Z_SOLO voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items, unsigned size)); void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr)); #endif #define ZALLOC(strm, items, size) \ (*((strm)->zalloc))((strm)->opaque, (items), (size)) #define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) #define TRY_FREE(s, p) {if (p) ZFREE(s, p);} /* Reverse the bytes in a 32-bit value */ #define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) #endif /* ZUTIL_H */ Index: head/sys/dev/zlib/zcalloc.c =================================================================== --- head/sys/dev/zlib/zcalloc.c (nonexistent) +++ head/sys/dev/zlib/zcalloc.c (revision 350496) @@ -0,0 +1,32 @@ +/* + * This file is in the public domain. + * $FreeBSD$ + */ + +#include +#include +#include +#include + +MALLOC_DEFINE(M_ZLIB, "zlib", "ZLIB Compressor"); + +void * +zcalloc_waitok(void *nil, u_int items, u_int size) +{ + + return mallocarray(items, size, M_ZLIB, M_WAITOK); +} + +void * +zcalloc_nowait(void *nil, u_int items, u_int size) +{ + + return mallocarray(items, size, M_ZLIB, M_NOWAIT); +} + +void +zcfree(void *nil, void *ptr) +{ + + free(ptr, M_ZLIB); +} Property changes on: head/sys/dev/zlib/zcalloc.c ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: head/sys/dev/zlib/zcalloc.h =================================================================== --- head/sys/dev/zlib/zcalloc.h (nonexistent) +++ head/sys/dev/zlib/zcalloc.h (revision 350496) @@ -0,0 +1,13 @@ +/* + * This file is in the public domain. + * $FreeBSD$ + */ + +#ifndef _DEV_ZLIB_ZCALLOC_ +#define _DEV_ZLIB_ZCALLOC_ + +void * zcalloc_waitok(void *nil, u_int items, u_int size); +void * zcalloc_nowait(void *nil, u_int items, u_int size); +void zcfree(void *nil, void *ptr); + +#endif Property changes on: head/sys/dev/zlib/zcalloc.h ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: head/sys/dev/zlib/zlib_mod.c =================================================================== --- head/sys/dev/zlib/zlib_mod.c (nonexistent) +++ head/sys/dev/zlib/zlib_mod.c (revision 350496) @@ -0,0 +1,53 @@ +/*- + * SPDX-License-Identifier: BSD-2-Clause + * + * Copyright (c) 2019 The FreeBSD Foundation + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#include +#include +#include +#include + +static int +zlib_modevent(module_t mod, int type, void *unused) +{ + switch (type) { + case MOD_LOAD: + return 0; + case MOD_UNLOAD: + return 0; + } + return EINVAL; +} + +static moduledata_t zlib_mod = { + "zlib", + zlib_modevent, + 0 +}; +DECLARE_MODULE(zlib, zlib_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); +MODULE_VERSION(zlib, 1); Property changes on: head/sys/dev/zlib/zlib_mod.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: head/sys/libkern/zlib.c =================================================================== --- head/sys/libkern/zlib.c (revision 350495) +++ head/sys/libkern/zlib.c (revision 350496) @@ -1,5414 +1,5388 @@ /* * This file is derived from various .h and .c files from the zlib-1.0.4 * distribution by Jean-loup Gailly and Mark Adler, with some additions * by Paul Mackerras to aid in implementing Deflate compression and * decompression for PPP packets. See zlib.h for conditions of * distribution and use. * * Changes that have been made include: * - added Z_PACKET_FLUSH (see zlib.h for details) * - added inflateIncomp and deflateOutputPending * - allow strm->next_out to be NULL, meaning discard the output * * $FreeBSD$ */ /* * ==FILEVERSION 971210== * * This marker is used by the Linux installation script to determine * whether an up-to-date version of this file is already installed. */ #define NO_DUMMY_DECL #define NO_ZCFUNCS #define MY_ZCALLOC #if defined(__FreeBSD__) && defined(_KERNEL) -#define _tr_init _zlib104_tr_init -#define _tr_align _zlib104_tr_align -#define _tr_tally _zlib104_tr_tally -#define _tr_flush_block _zlib104_tr_flush_block -#define _tr_stored_block _zlib104_tr_stored_block -#define inflate_fast _zlib104_inflate_fast -#define inflate _zlib104_inflate -#define zlibVersion _zlib104_Version +#define _tr_init zlib104_tr_init +#define _tr_align zlib104_tr_align +#define _tr_tally zlib104_tr_tally +#define _tr_flush_block zlib104_tr_flush_block +#define _tr_stored_block zlib104_tr_stored_block +#define inflate_fast zlib104_inflate_fast +#define inflate zlib104_inflate +#define zlibVersion zlib104_Version #endif /* +++ zutil.h */ /*- * zutil.h -- internal interface and configuration of the compression library * Copyright (C) 1995-1996 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ /* WARNING: this file should *not* be used by applications. It is part of the implementation of the compression library and is subject to change. Applications should only use zlib.h. */ /* From: zutil.h,v 1.16 1996/07/24 13:41:13 me Exp $ */ #ifndef _Z_UTIL_H #define _Z_UTIL_H #ifdef _KERNEL #include #else #include "zlib.h" #endif #ifdef _KERNEL /* Assume this is a *BSD or SVR4 kernel */ #include #include #include #include -#include -#include # define HAVE_MEMCPY #else #if defined(__KERNEL__) /* Assume this is a Linux kernel */ #include #define HAVE_MEMCPY #else /* not kernel */ #if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS) # include # include #else extern int errno; #endif #ifdef STDC # include # include #endif #endif /* __KERNEL__ */ #endif /* _KERNEL */ #ifndef local # define local static #endif /* compile with -Dlocal if your debugger can't find static symbols */ typedef unsigned char uch; typedef uch FAR uchf; typedef unsigned short ush; typedef ush FAR ushf; typedef unsigned long ulg; static const char *z_errmsg[10]; /* indexed by 2-zlib_error */ /* (size given to avoid silly warnings with Visual C++) */ #define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] #define ERR_RETURN(strm,err) \ return (strm->msg = (const char*)ERR_MSG(err), (err)) /* To be used only when the state is known to be valid */ /* common constants */ #ifndef DEF_WBITS # define DEF_WBITS MAX_WBITS #endif /* default windowBits for decompression. MAX_WBITS is for compression only */ #if MAX_MEM_LEVEL >= 8 # define DEF_MEM_LEVEL 8 #else # define DEF_MEM_LEVEL MAX_MEM_LEVEL #endif /* default memLevel */ #define STORED_BLOCK 0 #define STATIC_TREES 1 #define DYN_TREES 2 /* The three kinds of block type */ #define MIN_MATCH 3 #define MAX_MATCH 258 /* The minimum and maximum match lengths */ #define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ /* target dependencies */ #ifdef MSDOS # define OS_CODE 0x00 # ifdef __TURBOC__ # include # else /* MSC or DJGPP */ # include # endif #endif #ifdef OS2 # define OS_CODE 0x06 #endif #ifdef WIN32 /* Window 95 & Windows NT */ # define OS_CODE 0x0b #endif #if defined(VAXC) || defined(VMS) # define OS_CODE 0x02 # define FOPEN(name, mode) \ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") #endif #ifdef AMIGA # define OS_CODE 0x01 #endif #if defined(ATARI) || defined(atarist) # define OS_CODE 0x05 #endif #ifdef MACOS # define OS_CODE 0x07 #endif #ifdef __50SERIES /* Prime/PRIMOS */ # define OS_CODE 0x0F #endif #ifdef TOPS20 # define OS_CODE 0x0a #endif #if defined(_BEOS_) || defined(RISCOS) # define fdopen(fd,mode) NULL /* No fdopen() */ #endif /* Common defaults */ #ifndef OS_CODE # define OS_CODE 0x03 /* assume Unix */ #endif #ifndef FOPEN # define FOPEN(name, mode) fopen((name), (mode)) #endif /* functions */ #ifdef HAVE_STRERROR extern char *strerror OF((int)); # define zstrerror(errnum) strerror(errnum) #else # define zstrerror(errnum) "" #endif #if defined(pyr) # define NO_MEMCPY #endif #if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER) /* Use our own functions for small and medium model with MSC <= 5.0. * You may have to use the same strategy for Borland C (untested). */ # define NO_MEMCPY #endif #if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) # define HAVE_MEMCPY #endif #ifdef HAVE_MEMCPY # ifdef SMALL_MEDIUM /* MSDOS small or medium model */ # define zmemcpy _fmemcpy # define zmemcmp _fmemcmp # define zmemzero(dest, len) _fmemset(dest, 0, len) # else # define zmemcpy memcpy # define zmemcmp memcmp # define zmemzero(dest, len) memset(dest, 0, len) # endif #else extern void zmemcpy OF((Bytef* dest, Bytef* source, uInt len)); extern int zmemcmp OF((Bytef* s1, Bytef* s2, uInt len)); extern void zmemzero OF((Bytef* dest, uInt len)); #endif /* Diagnostic functions */ #ifdef DEBUG_ZLIB # include # ifndef verbose # define verbose 0 # endif extern void z_error OF((char *m)); # define Assert(cond,msg) {if(!(cond)) z_error(msg);} # define Trace(x) fprintf x # define Tracev(x) {if (verbose) fprintf x ;} # define Tracevv(x) {if (verbose>1) fprintf x ;} # define Tracec(c,x) {if (verbose && (c)) fprintf x ;} # define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} #else # define Assert(cond,msg) # define Trace(x) # define Tracev(x) # define Tracevv(x) # define Tracec(c,x) # define Tracecv(c,x) #endif typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len)); voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); void zcfree OF((voidpf opaque, voidpf ptr)); #define ZALLOC(strm, items, size) \ (*((strm)->zalloc))((strm)->opaque, (items), (size)) #define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) #define TRY_FREE(s, p) {if (p) ZFREE(s, p);} #endif /* _Z_UTIL_H */ /* --- zutil.h */ /* +++ deflate.h */ /* deflate.h -- internal compression state * Copyright (C) 1995-1996 Jean-loup Gailly * For conditions of distribution and use, see copyright notice in zlib.h */ /* WARNING: this file should *not* be used by applications. It is part of the implementation of the compression library and is subject to change. Applications should only use zlib.h. */ /* From: deflate.h,v 1.10 1996/07/02 12:41:00 me Exp $ */ #ifndef _DEFLATE_H #define _DEFLATE_H /* #include "zutil.h" */ /* =========================================================================== * Internal compression state. */ #define LENGTH_CODES 29 /* number of length codes, not counting the special END_BLOCK code */ #define LITERALS 256 /* number of literal bytes 0..255 */ #define L_CODES (LITERALS+1+LENGTH_CODES) /* number of Literal or Length codes, including the END_BLOCK code */ #define D_CODES 30 /* number of distance codes */ #define BL_CODES 19 /* number of codes used to transfer the bit lengths */ #define HEAP_SIZE (2*L_CODES+1) /* maximum heap size */ #define MAX_BITS 15 /* All codes must not exceed MAX_BITS bits */ #define INIT_STATE 42 #define BUSY_STATE 113 #define FINISH_STATE 666 /* Stream status */ /* Data structure describing a single value and its code string. */ typedef struct ct_data_s { union { ush freq; /* frequency count */ ush code; /* bit string */ } fc; union { ush dad; /* father node in Huffman tree */ ush len; /* length of bit string */ } dl; } FAR ct_data; #define Freq fc.freq #define Code fc.code #define Dad dl.dad #define Len dl.len typedef struct static_tree_desc_s static_tree_desc; typedef struct tree_desc_s { ct_data *dyn_tree; /* the dynamic tree */ int max_code; /* largest code with non zero frequency */ static_tree_desc *stat_desc; /* the corresponding static tree */ } FAR tree_desc; typedef ush Pos; typedef Pos FAR Posf; typedef unsigned IPos; /* A Pos is an index in the character window. We use short instead of int to * save space in the various tables. IPos is used only for parameter passing. */ typedef struct deflate_state { z_streamp strm; /* pointer back to this zlib stream */ int status; /* as the name implies */ Bytef *pending_buf; /* output still pending */ ulg pending_buf_size; /* size of pending_buf */ Bytef *pending_out; /* next pending byte to output to the stream */ int pending; /* nb of bytes in the pending buffer */ int noheader; /* suppress zlib header and adler32 */ Byte data_type; /* UNKNOWN, BINARY or ASCII */ Byte method; /* STORED (for zip only) or DEFLATED */ int last_flush; /* value of flush param for previous deflate call */ /* used by deflate.c: */ uInt w_size; /* LZ77 window size (32K by default) */ uInt w_bits; /* log2(w_size) (8..16) */ uInt w_mask; /* w_size - 1 */ Bytef *window; /* Sliding window. Input bytes are read into the second half of the window, * and move to the first half later to keep a dictionary of at least wSize * bytes. With this organization, matches are limited to a distance of * wSize-MAX_MATCH bytes, but this ensures that IO is always * performed with a length multiple of the block size. Also, it limits * the window size to 64K, which is quite useful on MSDOS. * To do: use the user input buffer as sliding window. */ ulg window_size; /* Actual size of window: 2*wSize, except when the user input buffer * is directly used as sliding window. */ Posf *prev; /* Link to older string with same hash index. To limit the size of this * array to 64K, this link is maintained only for the last 32K strings. * An index in this array is thus a window index modulo 32K. */ Posf *head; /* Heads of the hash chains or NIL. */ uInt ins_h; /* hash index of string to be inserted */ uInt hash_size; /* number of elements in hash table */ uInt hash_bits; /* log2(hash_size) */ uInt hash_mask; /* hash_size-1 */ uInt hash_shift; /* Number of bits by which ins_h must be shifted at each input * step. It must be such that after MIN_MATCH steps, the oldest * byte no longer takes part in the hash key, that is: * hash_shift * MIN_MATCH >= hash_bits */ long block_start; /* Window position at the beginning of the current output block. Gets * negative when the window is moved backwards. */ uInt match_length; /* length of best match */ IPos prev_match; /* previous match */ int match_available; /* set if previous match exists */ uInt strstart; /* start of string to insert */ uInt match_start; /* start of matching string */ uInt lookahead; /* number of valid bytes ahead in window */ uInt prev_length; /* Length of the best match at previous step. Matches not greater than this * are discarded. This is used in the lazy match evaluation. */ uInt max_chain_length; /* To speed up deflation, hash chains are never searched beyond this * length. A higher limit improves compression ratio but degrades the * speed. */ uInt max_lazy_match; /* Attempt to find a better match only when the current match is strictly * smaller than this value. This mechanism is used only for compression * levels >= 4. */ # define max_insert_length max_lazy_match /* Insert new strings in the hash table only if the match length is not * greater than this length. This saves time but degrades compression. * max_insert_length is used only for compression levels <= 3. */ int level; /* compression level (1..9) */ int strategy; /* favor or force Huffman coding*/ uInt good_match; /* Use a faster search when the previous match is longer than this */ int nice_match; /* Stop searching when current match exceeds this */ /* used by trees.c: */ /* Didn't use ct_data typedef below to supress compiler warning */ struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ struct tree_desc_s l_desc; /* desc. for literal tree */ struct tree_desc_s d_desc; /* desc. for distance tree */ struct tree_desc_s bl_desc; /* desc. for bit length tree */ ush bl_count[MAX_BITS+1]; /* number of codes at each bit length for an optimal tree */ int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ int heap_len; /* number of elements in the heap */ int heap_max; /* element of largest frequency */ /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. * The same heap array is used to build all trees. */ uch depth[2*L_CODES+1]; /* Depth of each subtree used as tie breaker for trees of equal frequency */ uchf *l_buf; /* buffer for literals or lengths */ uInt lit_bufsize; /* Size of match buffer for literals/lengths. There are 4 reasons for * limiting lit_bufsize to 64K: * - frequencies can be kept in 16 bit counters * - if compression is not successful for the first block, all input * data is still in the window so we can still emit a stored block even * when input comes from standard input. (This can also be done for * all blocks if lit_bufsize is not greater than 32K.) * - if compression is not successful for a file smaller than 64K, we can * even emit a stored file instead of a stored block (saving 5 bytes). * This is applicable only for zip (not gzip or zlib). * - creating new Huffman trees less frequently may not provide fast * adaptation to changes in the input data statistics. (Take for * example a binary file with poorly compressible code followed by * a highly compressible string table.) Smaller buffer sizes give * fast adaptation but have of course the overhead of transmitting * trees more frequently. * - I can't count above 4 */ uInt last_lit; /* running index in l_buf */ ushf *d_buf; /* Buffer for distances. To simplify the code, d_buf and l_buf have * the same number of elements. To use different lengths, an extra flag * array would be necessary. */ ulg opt_len; /* bit length of current block with optimal trees */ ulg static_len; /* bit length of current block with static trees */ ulg compressed_len; /* total bit length of compressed file */ uInt matches; /* number of string matches in current block */ int last_eob_len; /* bit length of EOB code for last block */ #ifdef DEBUG_ZLIB ulg bits_sent; /* bit length of the compressed data */ #endif ush bi_buf; /* Output buffer. bits are inserted starting at the bottom (least * significant bits). */ int bi_valid; /* Number of valid bits in bi_buf. All bits above the last valid bit * are always zero. */ } FAR deflate_state; /* Output a byte on the stream. * IN assertion: there is enough room in pending_buf. */ #define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} #define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) /* Minimum amount of lookahead, except at the end of the input file. * See deflate.c for comments about the MIN_MATCH+1. */ #define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) /* In order to simplify the code, particularly on 16 bit machines, match * distances are limited to MAX_DIST instead of WSIZE. */ /* in trees.c */ void _tr_init OF((deflate_state *s)); int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); ulg _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, int eof)); void _tr_align OF((deflate_state *s)); void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len, int eof)); void _tr_stored_type_only OF((deflate_state *)); #endif /* --- deflate.h */ /* +++ deflate.c */ /* deflate.c -- compress data using the deflation algorithm * Copyright (C) 1995-1996 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ /* * ALGORITHM * * The "deflation" process depends on being able to identify portions * of the input text which are identical to earlier input (within a * sliding window trailing behind the input currently being processed). * * The most straightforward technique turns out to be the fastest for * most input files: try all possible matches and select the longest. * The key feature of this algorithm is that insertions into the string * dictionary are very simple and thus fast, and deletions are avoided * completely. Insertions are performed at each input character, whereas * string matches are performed only when the previous match ends. So it * is preferable to spend more time in matches to allow very fast string * insertions and avoid deletions. The matching algorithm for small * strings is inspired from that of Rabin & Karp. A brute force approach * is used to find longer strings when a small match has been found. * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze * (by Leonid Broukhis). * A previous version of this file used a more sophisticated algorithm * (by Fiala and Greene) which is guaranteed to run in linear amortized * time, but has a larger average cost, uses more memory and is patented. * However the F&G algorithm may be faster for some highly redundant * files if the parameter max_chain_length (described below) is too large. * * ACKNOWLEDGEMENTS * * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and * I found it in 'freeze' written by Leonid Broukhis. * Thanks to many people for bug reports and testing. * * REFERENCES * * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". * Available in ftp://ds.internic.net/rfc/rfc1951.txt * * A description of the Rabin and Karp algorithm is given in the book * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. * * Fiala,E.R., and Greene,D.H. * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 * */ /* From: deflate.c,v 1.15 1996/07/24 13:40:58 me Exp $ */ /* #include "deflate.h" */ -char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot include such an acknowledgment, I would appreciate that you keep this copyright string in the executable of your product. */ /* =========================================================================== * Function prototypes. */ typedef enum { need_more, /* block not completed, need more input or more output */ block_done, /* block flush performed */ finish_started, /* finish started, need only more output at next deflate */ finish_done /* finish done, accept no more input or output */ } block_state; typedef block_state (*compress_func) OF((deflate_state *s, int flush)); /* Compression function. Returns the block state after the call. */ local void fill_window OF((deflate_state *s)); local block_state deflate_stored OF((deflate_state *s, int flush)); local block_state deflate_fast OF((deflate_state *s, int flush)); local block_state deflate_slow OF((deflate_state *s, int flush)); local void lm_init OF((deflate_state *s)); local void putShortMSB OF((deflate_state *s, uInt b)); local void flush_pending OF((z_streamp strm)); local int read_buf OF((z_streamp strm, charf *buf, unsigned size)); #ifdef ASMV void match_init OF((void)); /* asm code initialization */ uInt longest_match OF((deflate_state *s, IPos cur_match)); #else local uInt longest_match OF((deflate_state *s, IPos cur_match)); #endif #ifdef DEBUG_ZLIB local void check_match OF((deflate_state *s, IPos start, IPos match, int length)); #endif /* =========================================================================== * Local data */ #define NIL 0 /* Tail of hash chains */ #ifndef TOO_FAR # define TOO_FAR 4096 #endif /* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ #define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) /* Minimum amount of lookahead, except at the end of the input file. * See deflate.c for comments about the MIN_MATCH+1. */ /* Values for max_lazy_match, good_match and max_chain_length, depending on * the desired pack level (0..9). The values given below have been tuned to * exclude worst case performance for pathological files. Better values may be * found for specific files. */ typedef struct config_s { ush good_length; /* reduce lazy search above this match length */ ush max_lazy; /* do not perform lazy search above this match length */ ush nice_length; /* quit search above this match length */ ush max_chain; compress_func func; } config; local config configuration_table[10] = { /* good lazy nice chain */ /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ /* 1 */ {4, 4, 8, 4, deflate_fast}, /* maximum speed, no lazy matches */ /* 2 */ {4, 5, 16, 8, deflate_fast}, /* 3 */ {4, 6, 32, 32, deflate_fast}, /* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ /* 5 */ {8, 16, 32, 32, deflate_slow}, /* 6 */ {8, 16, 128, 128, deflate_slow}, /* 7 */ {8, 32, 128, 256, deflate_slow}, /* 8 */ {32, 128, 258, 1024, deflate_slow}, /* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */ /* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 * For deflate_fast() (levels <= 3) good is ignored and lazy has a different * meaning. */ #define EQUAL 0 /* result of memcmp for equal strings */ #ifndef NO_DUMMY_DECL struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ #endif /* =========================================================================== * Update a hash value with the given input byte * IN assertion: all calls to to UPDATE_HASH are made with consecutive * input characters, so that a running hash key can be computed from the * previous key instead of complete recalculation each time. */ #define UPDATE_HASH(s,h,c) (h = (((h)<hash_shift) ^ (c)) & s->hash_mask) /* =========================================================================== * Insert string str in the dictionary and set match_head to the previous head * of the hash chain (the most recent string with same hash key). Return * the previous length of the hash chain. * IN assertion: all calls to to INSERT_STRING are made with consecutive * input characters and the first MIN_MATCH bytes of str are valid * (except for the last MIN_MATCH-1 bytes of the input file). */ #define INSERT_STRING(s, str, match_head) \ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \ s->head[s->ins_h] = (Pos)(str)) /* =========================================================================== * Initialize the hash table (avoiding 64K overflow for 16 bit systems). * prev[] will be initialized on the fly. */ #define CLEAR_HASH(s) \ s->head[s->hash_size-1] = NIL; \ zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); /* ========================================================================= */ int deflateInit_(strm, level, version, stream_size) z_streamp strm; int level; const char *version; int stream_size; { return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, version, stream_size); /* To do: ignore strm->next_in if we use it as window */ } /* ========================================================================= */ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy, version, stream_size) z_streamp strm; int level; int method; int windowBits; int memLevel; int strategy; const char *version; int stream_size; { deflate_state *s; int noheader = 0; static char* my_version = ZLIB_VERSION; ushf *overlay; /* We overlay pending_buf and d_buf+l_buf. This works since the average * output size for (length,distance) codes is <= 24 bits. */ if (version == Z_NULL || version[0] != my_version[0] || stream_size != sizeof(z_stream)) { return Z_VERSION_ERROR; } if (strm == Z_NULL) return Z_STREAM_ERROR; strm->msg = Z_NULL; #ifndef NO_ZCFUNCS if (strm->zalloc == Z_NULL) { strm->zalloc = zcalloc; strm->opaque = (voidpf)0; } if (strm->zfree == Z_NULL) strm->zfree = zcfree; #endif if (level == Z_DEFAULT_COMPRESSION) level = 6; if (windowBits < 0) { /* undocumented feature: suppress zlib header */ noheader = 1; windowBits = -windowBits; } if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || windowBits < 9 || windowBits > 15 || level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) { return Z_STREAM_ERROR; } s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); if (s == Z_NULL) return Z_MEM_ERROR; strm->state = (struct internal_state FAR *)s; s->strm = strm; s->noheader = noheader; s->w_bits = windowBits; s->w_size = 1 << s->w_bits; s->w_mask = s->w_size - 1; s->hash_bits = memLevel + 7; s->hash_size = 1 << s->hash_bits; s->hash_mask = s->hash_size - 1; s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); s->pending_buf = (uchf *) overlay; s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || s->pending_buf == Z_NULL) { strm->msg = (const char*)ERR_MSG(Z_MEM_ERROR); deflateEnd (strm); return Z_MEM_ERROR; } s->d_buf = overlay + s->lit_bufsize/sizeof(ush); s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; s->level = level; s->strategy = strategy; s->method = (Byte)method; return deflateReset(strm); } /* ========================================================================= */ int deflateSetDictionary (strm, dictionary, dictLength) z_streamp strm; const Bytef *dictionary; uInt dictLength; { deflate_state *s; uInt length = dictLength; uInt n; IPos hash_head = 0; if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL) return Z_STREAM_ERROR; s = (deflate_state *) strm->state; if (s->status != INIT_STATE) return Z_STREAM_ERROR; strm->adler = adler32(strm->adler, dictionary, dictLength); if (length < MIN_MATCH) return Z_OK; if (length > MAX_DIST(s)) { length = MAX_DIST(s); #ifndef USE_DICT_HEAD dictionary += dictLength - length; /* use the tail of the dictionary */ #endif } zmemcpy((charf *)s->window, dictionary, length); s->strstart = length; s->block_start = (long)length; /* Insert all strings in the hash table (except for the last two bytes). * s->lookahead stays null, so s->ins_h will be recomputed at the next * call of fill_window. */ s->ins_h = s->window[0]; UPDATE_HASH(s, s->ins_h, s->window[1]); for (n = 0; n <= length - MIN_MATCH; n++) { INSERT_STRING(s, n, hash_head); } if (hash_head) hash_head = 0; /* to make compiler happy */ return Z_OK; } /* ========================================================================= */ int deflateReset (strm) z_streamp strm; { deflate_state *s; if (strm == Z_NULL || strm->state == Z_NULL || strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR; strm->total_in = strm->total_out = 0; strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ strm->data_type = Z_UNKNOWN; s = (deflate_state *)strm->state; s->pending = 0; s->pending_out = s->pending_buf; if (s->noheader < 0) { s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */ } s->status = s->noheader ? BUSY_STATE : INIT_STATE; strm->adler = 1; s->last_flush = Z_NO_FLUSH; _tr_init(s); lm_init(s); return Z_OK; } /* ========================================================================= */ int deflateParams(strm, level, strategy) z_streamp strm; int level; int strategy; { deflate_state *s; compress_func func; int err = Z_OK; if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; s = (deflate_state *) strm->state; if (level == Z_DEFAULT_COMPRESSION) { level = 6; } if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) { return Z_STREAM_ERROR; } func = configuration_table[s->level].func; if (func != configuration_table[level].func && strm->total_in != 0) { /* Flush the last buffer: */ err = deflate(strm, Z_PARTIAL_FLUSH); } if (s->level != level) { s->level = level; s->max_lazy_match = configuration_table[level].max_lazy; s->good_match = configuration_table[level].good_length; s->nice_match = configuration_table[level].nice_length; s->max_chain_length = configuration_table[level].max_chain; } s->strategy = strategy; return err; } /* ========================================================================= * Put a short in the pending buffer. The 16-bit value is put in MSB order. * IN assertion: the stream state is correct and there is enough room in * pending_buf. */ local void putShortMSB (s, b) deflate_state *s; uInt b; { put_byte(s, (Byte)(b >> 8)); put_byte(s, (Byte)(b & 0xff)); } /* ========================================================================= * Flush as much pending output as possible. All deflate() output goes * through this function so some applications may wish to modify it * to avoid allocating a large strm->next_out buffer and copying into it. * (See also read_buf()). */ local void flush_pending(strm) z_streamp strm; { deflate_state *s = (deflate_state *) strm->state; unsigned len = s->pending; if (len > strm->avail_out) len = strm->avail_out; if (len == 0) return; if (strm->next_out != Z_NULL) { zmemcpy(strm->next_out, s->pending_out, len); strm->next_out += len; } s->pending_out += len; strm->total_out += len; strm->avail_out -= len; s->pending -= len; if (s->pending == 0) { s->pending_out = s->pending_buf; } } /* ========================================================================= */ int deflate (strm, flush) z_streamp strm; int flush; { int old_flush; /* value of flush param for previous deflate call */ deflate_state *s; if (strm == Z_NULL || strm->state == Z_NULL || flush > Z_FINISH || flush < 0) { return Z_STREAM_ERROR; } s = (deflate_state *) strm->state; if ((strm->next_in == Z_NULL && strm->avail_in != 0) || (s->status == FINISH_STATE && flush != Z_FINISH)) { ERR_RETURN(strm, Z_STREAM_ERROR); } if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); s->strm = strm; /* just in case */ old_flush = s->last_flush; s->last_flush = flush; /* Write the zlib header */ if (s->status == INIT_STATE) { uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; uInt level_flags = (s->level-1) >> 1; if (level_flags > 3) level_flags = 3; header |= (level_flags << 6); if (s->strstart != 0) header |= PRESET_DICT; header += 31 - (header % 31); s->status = BUSY_STATE; putShortMSB(s, header); /* Save the adler32 of the preset dictionary: */ if (s->strstart != 0) { putShortMSB(s, (uInt)(strm->adler >> 16)); putShortMSB(s, (uInt)(strm->adler & 0xffff)); } strm->adler = 1L; } /* Flush as much pending output as possible */ if (s->pending != 0) { flush_pending(strm); if (strm->avail_out == 0) { /* Since avail_out is 0, deflate will be called again with * more output space, but possibly with both pending and * avail_in equal to zero. There won't be anything to do, * but this is not an error situation so make sure we * return OK instead of BUF_ERROR at next call of deflate: */ s->last_flush = -1; return Z_OK; } /* Make sure there is something to do and avoid duplicate consecutive * flushes. For repeated and useless calls with Z_FINISH, we keep * returning Z_STREAM_END instead of Z_BUFF_ERROR. */ } else if (strm->avail_in == 0 && flush <= old_flush && flush != Z_FINISH) { ERR_RETURN(strm, Z_BUF_ERROR); } /* User must not provide more input after the first FINISH: */ if (s->status == FINISH_STATE && strm->avail_in != 0) { ERR_RETURN(strm, Z_BUF_ERROR); } /* Start a new block or continue the current one. */ if (strm->avail_in != 0 || s->lookahead != 0 || (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { block_state bstate; bstate = (*(configuration_table[s->level].func))(s, flush); if (bstate == finish_started || bstate == finish_done) { s->status = FINISH_STATE; } if (bstate == need_more || bstate == finish_started) { if (strm->avail_out == 0) { s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ } return Z_OK; /* If flush != Z_NO_FLUSH && avail_out == 0, the next call * of deflate should use the same flush parameter to make sure * that the flush is complete. So we don't have to output an * empty block here, this will be done at next call. This also * ensures that for a very small output buffer, we emit at most * one empty block. */ } if (bstate == block_done) { if (flush == Z_PARTIAL_FLUSH) { _tr_align(s); } else if (flush == Z_PACKET_FLUSH) { /* Output just the 3-bit `stored' block type value, but not a zero length. */ _tr_stored_type_only(s); } else { /* FULL_FLUSH or SYNC_FLUSH */ _tr_stored_block(s, (char*)0, 0L, 0); /* For a full flush, this empty block will be recognized * as a special marker by inflate_sync(). */ if (flush == Z_FULL_FLUSH) { CLEAR_HASH(s); /* forget history */ } } flush_pending(strm); if (strm->avail_out == 0) { s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ return Z_OK; } } } Assert(strm->avail_out > 0, "bug2"); if (flush != Z_FINISH) return Z_OK; if (s->noheader) return Z_STREAM_END; /* Write the zlib trailer (adler32) */ putShortMSB(s, (uInt)(strm->adler >> 16)); putShortMSB(s, (uInt)(strm->adler & 0xffff)); flush_pending(strm); /* If avail_out is zero, the application will call deflate again * to flush the rest. */ s->noheader = -1; /* write the trailer only once! */ return s->pending != 0 ? Z_OK : Z_STREAM_END; } /* ========================================================================= */ int deflateEnd (strm) z_streamp strm; { int status; deflate_state *s; if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; s = (deflate_state *) strm->state; status = s->status; if (status != INIT_STATE && status != BUSY_STATE && status != FINISH_STATE) { return Z_STREAM_ERROR; } /* Deallocate in reverse order of allocations: */ TRY_FREE(strm, s->pending_buf); TRY_FREE(strm, s->head); TRY_FREE(strm, s->prev); TRY_FREE(strm, s->window); ZFREE(strm, s); strm->state = Z_NULL; return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; } /* ========================================================================= * Copy the source state to the destination state. */ int deflateCopy (dest, source) z_streamp dest; z_streamp source; { deflate_state *ds; deflate_state *ss; ushf *overlay; if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) return Z_STREAM_ERROR; ss = (deflate_state *) source->state; zmemcpy(dest, source, sizeof(*dest)); ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); if (ds == Z_NULL) return Z_MEM_ERROR; dest->state = (struct internal_state FAR *) ds; zmemcpy(ds, ss, sizeof(*ds)); ds->strm = dest; ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); ds->pending_buf = (uchf *) overlay; if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || ds->pending_buf == Z_NULL) { deflateEnd (dest); return Z_MEM_ERROR; } /* ??? following zmemcpy doesn't work for 16-bit MSDOS */ zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; ds->l_desc.dyn_tree = ds->dyn_ltree; ds->d_desc.dyn_tree = ds->dyn_dtree; ds->bl_desc.dyn_tree = ds->bl_tree; return Z_OK; } /* =========================================================================== * Return the number of bytes of output which are immediately available * for output from the decompressor. */ int deflateOutputPending (strm) z_streamp strm; { if (strm == Z_NULL || strm->state == Z_NULL) return 0; return ((deflate_state *)(strm->state))->pending; } /* =========================================================================== * Read a new buffer from the current input stream, update the adler32 * and total number of bytes read. All deflate() input goes through * this function so some applications may wish to modify it to avoid * allocating a large strm->next_in buffer and copying from it. * (See also flush_pending()). */ local int read_buf(strm, buf, size) z_streamp strm; charf *buf; unsigned size; { unsigned len = strm->avail_in; if (len > size) len = size; if (len == 0) return 0; strm->avail_in -= len; if (!((deflate_state *)(strm->state))->noheader) { strm->adler = adler32(strm->adler, strm->next_in, len); } zmemcpy(buf, strm->next_in, len); strm->next_in += len; strm->total_in += len; return (int)len; } /* =========================================================================== * Initialize the "longest match" routines for a new zlib stream */ local void lm_init (s) deflate_state *s; { s->window_size = (ulg)2L*s->w_size; CLEAR_HASH(s); /* Set the default configuration parameters: */ s->max_lazy_match = configuration_table[s->level].max_lazy; s->good_match = configuration_table[s->level].good_length; s->nice_match = configuration_table[s->level].nice_length; s->max_chain_length = configuration_table[s->level].max_chain; s->strstart = 0; s->block_start = 0L; s->lookahead = 0; s->match_length = s->prev_length = MIN_MATCH-1; s->match_available = 0; s->ins_h = 0; #ifdef ASMV match_init(); /* initialize the asm code */ #endif } /* =========================================================================== * Set match_start to the longest match starting at the given string and * return its length. Matches shorter or equal to prev_length are discarded, * in which case the result is equal to prev_length and match_start is * garbage. * IN assertions: cur_match is the head of the hash chain for the current * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 * OUT assertion: the match length is not greater than s->lookahead. */ #ifndef ASMV /* For 80x86 and 680x0, an optimized version will be provided in match.asm or * match.S. The code will be functionally equivalent. */ local uInt longest_match(s, cur_match) deflate_state *s; IPos cur_match; /* current match */ { unsigned chain_length = s->max_chain_length;/* max hash chain length */ Bytef *scan = s->window + s->strstart; /* current string */ Bytef *match; /* matched string */ int len; /* length of current match */ int best_len = s->prev_length; /* best match length so far */ int nice_match = s->nice_match; /* stop if match long enough */ IPos limit = s->strstart > (IPos)MAX_DIST(s) ? s->strstart - (IPos)MAX_DIST(s) : NIL; /* Stop when cur_match becomes <= limit. To simplify the code, * we prevent matches with the string of window index 0. */ Posf *prev = s->prev; uInt wmask = s->w_mask; #ifdef UNALIGNED_OK /* Compare two bytes at a time. Note: this is not always beneficial. * Try with and without -DUNALIGNED_OK to check. */ Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; ush scan_start = *(ushf*)scan; ush scan_end = *(ushf*)(scan+best_len-1); #else Bytef *strend = s->window + s->strstart + MAX_MATCH; Byte scan_end1 = scan[best_len-1]; Byte scan_end = scan[best_len]; #endif /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. * It is easy to get rid of this optimization if necessary. */ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); /* Do not waste too much time if we already have a good match: */ if (s->prev_length >= s->good_match) { chain_length >>= 2; } /* Do not look for matches beyond the end of the input. This is necessary * to make deflate deterministic. */ if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); do { Assert(cur_match < s->strstart, "no future"); match = s->window + cur_match; /* Skip to next match if the match length cannot increase * or if the match length is less than 2: */ #if (defined(UNALIGNED_OK) && MAX_MATCH == 258) /* This code assumes sizeof(unsigned short) == 2. Do not use * UNALIGNED_OK if your compiler uses a different size. */ if (*(ushf*)(match+best_len-1) != scan_end || *(ushf*)match != scan_start) continue; /* It is not necessary to compare scan[2] and match[2] since they are * always equal when the other bytes match, given that the hash keys * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at * strstart+3, +5, ... up to strstart+257. We check for insufficient * lookahead only every 4th comparison; the 128th check will be made * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is * necessary to put more guard bytes at the end of the window, or * to check more often for insufficient lookahead. */ Assert(scan[2] == match[2], "scan[2]?"); scan++, match++; do { } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && *(ushf*)(scan+=2) == *(ushf*)(match+=2) && *(ushf*)(scan+=2) == *(ushf*)(match+=2) && *(ushf*)(scan+=2) == *(ushf*)(match+=2) && scan < strend); /* The funny "do {}" generates better code on most compilers */ /* Here, scan <= window+strstart+257 */ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); if (*scan == *match) scan++; len = (MAX_MATCH - 1) - (int)(strend-scan); scan = strend - (MAX_MATCH-1); #else /* UNALIGNED_OK */ if (match[best_len] != scan_end || match[best_len-1] != scan_end1 || *match != *scan || *++match != scan[1]) continue; /* The check at best_len-1 can be removed because it will be made * again later. (This heuristic is not always a win.) * It is not necessary to compare scan[2] and match[2] since they * are always equal when the other bytes match, given that * the hash keys are equal and that HASH_BITS >= 8. */ scan += 2, match++; Assert(*scan == *match, "match[2]?"); /* We check for insufficient lookahead only every 8th comparison; * the 256th check will be made at strstart+258. */ do { } while (*++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && *++scan == *++match && scan < strend); Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); len = MAX_MATCH - (int)(strend - scan); scan = strend - MAX_MATCH; #endif /* UNALIGNED_OK */ if (len > best_len) { s->match_start = cur_match; best_len = len; if (len >= nice_match) break; #ifdef UNALIGNED_OK scan_end = *(ushf*)(scan+best_len-1); #else scan_end1 = scan[best_len-1]; scan_end = scan[best_len]; #endif } } while ((cur_match = prev[cur_match & wmask]) > limit && --chain_length != 0); if ((uInt)best_len <= s->lookahead) return best_len; return s->lookahead; } #endif /* ASMV */ #ifdef DEBUG_ZLIB /* =========================================================================== * Check that the match at match_start is indeed a match. */ local void check_match(s, start, match, length) deflate_state *s; IPos start, match; int length; { /* check that the match is indeed a match */ if (zmemcmp((charf *)s->window + match, (charf *)s->window + start, length) != EQUAL) { fprintf(stderr, " start %u, match %u, length %d\n", start, match, length); do { fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); } while (--length != 0); z_error("invalid match"); } if (z_verbose > 1) { fprintf(stderr,"\\[%d,%d]", start-match, length); do { putc(s->window[start++], stderr); } while (--length != 0); } } #else # define check_match(s, start, match, length) #endif /* =========================================================================== * Fill the window when the lookahead becomes insufficient. * Updates strstart and lookahead. * * IN assertion: lookahead < MIN_LOOKAHEAD * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD * At least one byte has been read, or avail_in == 0; reads are * performed for at least two bytes (required for the zip translate_eol * option -- not supported here). */ local void fill_window(s) deflate_state *s; { unsigned n, m; Posf *p; unsigned more; /* Amount of free space at the end of the window. */ uInt wsize = s->w_size; do { more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); /* Deal with !@#$% 64K limit: */ if (more == 0 && s->strstart == 0 && s->lookahead == 0) { more = wsize; } else if (more == (unsigned)(-1)) { /* Very unlikely, but possible on 16 bit machine if strstart == 0 * and lookahead == 1 (input done one byte at time) */ more--; /* If the window is almost full and there is insufficient lookahead, * move the upper half to the lower one to make room in the upper half. */ } else if (s->strstart >= wsize+MAX_DIST(s)) { zmemcpy((charf *)s->window, (charf *)s->window+wsize, (unsigned)wsize); s->match_start -= wsize; s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ s->block_start -= (long) wsize; /* Slide the hash table (could be avoided with 32 bit values at the expense of memory usage). We slide even when level == 0 to keep the hash table consistent if we switch back to level > 0 later. (Using level 0 permanently is not an optimal usage of zlib, so we don't care about this pathological case.) */ n = s->hash_size; p = &s->head[n]; do { m = *--p; *p = (Pos)(m >= wsize ? m-wsize : NIL); } while (--n); n = wsize; p = &s->prev[n]; do { m = *--p; *p = (Pos)(m >= wsize ? m-wsize : NIL); /* If n is not on any hash chain, prev[n] is garbage but * its value will never be used. */ } while (--n); more += wsize; } if (s->strm->avail_in == 0) return; /* If there was no sliding: * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && * more == window_size - lookahead - strstart * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) * => more >= window_size - 2*WSIZE + 2 * In the BIG_MEM or MMAP case (not yet supported), * window_size == input_size + MIN_LOOKAHEAD && * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. * Otherwise, window_size == 2*WSIZE so more >= 2. * If there was sliding, more >= WSIZE. So in all cases, more >= 2. */ Assert(more >= 2, "more < 2"); n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead, more); s->lookahead += n; /* Initialize the hash value now that we have some input: */ if (s->lookahead >= MIN_MATCH) { s->ins_h = s->window[s->strstart]; UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); #if MIN_MATCH != 3 Call UPDATE_HASH() MIN_MATCH-3 more times #endif } /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, * but this is not important since only literal bytes will be emitted. */ } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); } /* =========================================================================== * Flush the current block, with given end-of-file flag. * IN assertion: strstart is set to the end of the current match. */ #define FLUSH_BLOCK_ONLY(s, eof) { \ _tr_flush_block(s, (s->block_start >= 0L ? \ (charf *)&s->window[(unsigned)s->block_start] : \ (charf *)Z_NULL), \ (ulg)((long)s->strstart - s->block_start), \ (eof)); \ s->block_start = s->strstart; \ flush_pending(s->strm); \ Tracev((stderr,"[FLUSH]")); \ } /* Same but force premature exit if necessary. */ #define FLUSH_BLOCK(s, eof) { \ FLUSH_BLOCK_ONLY(s, eof); \ if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \ } /* =========================================================================== * Copy without compression as much as possible from the input stream, return * the current block state. * This function does not insert new strings in the dictionary since * uncompressible data is probably not useful. This function is used * only for the level=0 compression option. * NOTE: this function should be optimized to avoid extra copying from * window to pending_buf. */ local block_state deflate_stored(s, flush) deflate_state *s; int flush; { /* Stored blocks are limited to 0xffff bytes, pending_buf is limited * to pending_buf_size, and each stored block has a 5 byte header: */ ulg max_block_size = 0xffff; ulg max_start; if (max_block_size > s->pending_buf_size - 5) { max_block_size = s->pending_buf_size - 5; } /* Copy as much as possible from input to output: */ for (;;) { /* Fill the window as much as possible: */ if (s->lookahead <= 1) { Assert(s->strstart < s->w_size+MAX_DIST(s) || s->block_start >= (long)s->w_size, "slide too late"); fill_window(s); if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; if (s->lookahead == 0) break; /* flush the current block */ } Assert(s->block_start >= 0L, "block gone"); s->strstart += s->lookahead; s->lookahead = 0; /* Emit a stored block if pending_buf will be full: */ max_start = s->block_start + max_block_size; if (s->strstart == 0 || (ulg)s->strstart >= max_start) { /* strstart == 0 is possible when wraparound on 16-bit machine */ s->lookahead = (uInt)(s->strstart - max_start); s->strstart = (uInt)max_start; FLUSH_BLOCK(s, 0); } /* Flush if we may have to slide, otherwise block_start may become * negative and the data will be gone: */ if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { FLUSH_BLOCK(s, 0); } } FLUSH_BLOCK(s, flush == Z_FINISH); return flush == Z_FINISH ? finish_done : block_done; } /* =========================================================================== * Compress as much as possible from the input stream, return the current * block state. * This function does not perform lazy evaluation of matches and inserts * new strings in the dictionary only for unmatched strings or for short * matches. It is used only for the fast compression options. */ local block_state deflate_fast(s, flush) deflate_state *s; int flush; { IPos hash_head = NIL; /* head of the hash chain */ int bflush; /* set if current block must be flushed */ for (;;) { /* Make sure that we always have enough lookahead, except * at the end of the input file. We need MAX_MATCH bytes * for the next match, plus MIN_MATCH bytes to insert the * string following the next match. */ if (s->lookahead < MIN_LOOKAHEAD) { fill_window(s); if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { return need_more; } if (s->lookahead == 0) break; /* flush the current block */ } /* Insert the string window[strstart .. strstart+2] in the * dictionary, and set hash_head to the head of the hash chain: */ if (s->lookahead >= MIN_MATCH) { INSERT_STRING(s, s->strstart, hash_head); } /* Find the longest match, discarding those <= prev_length. * At this point we have always match_length < MIN_MATCH */ if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { /* To simplify the code, we prevent matches with the string * of window index 0 (in particular we have to avoid a match * of the string with itself at the start of the input file). */ if (s->strategy != Z_HUFFMAN_ONLY) { s->match_length = longest_match (s, hash_head); } /* longest_match() sets match_start */ } if (s->match_length >= MIN_MATCH) { check_match(s, s->strstart, s->match_start, s->match_length); bflush = _tr_tally(s, s->strstart - s->match_start, s->match_length - MIN_MATCH); s->lookahead -= s->match_length; /* Insert new strings in the hash table only if the match length * is not too large. This saves time but degrades compression. */ if (s->match_length <= s->max_insert_length && s->lookahead >= MIN_MATCH) { s->match_length--; /* string at strstart already in hash table */ do { s->strstart++; INSERT_STRING(s, s->strstart, hash_head); /* strstart never exceeds WSIZE-MAX_MATCH, so there are * always MIN_MATCH bytes ahead. */ } while (--s->match_length != 0); s->strstart++; } else { s->strstart += s->match_length; s->match_length = 0; s->ins_h = s->window[s->strstart]; UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); #if MIN_MATCH != 3 Call UPDATE_HASH() MIN_MATCH-3 more times #endif /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not * matter since it will be recomputed at next deflate call. */ } } else { /* No match, output a literal byte */ Tracevv((stderr,"%c", s->window[s->strstart])); bflush = _tr_tally (s, 0, s->window[s->strstart]); s->lookahead--; s->strstart++; } if (bflush) FLUSH_BLOCK(s, 0); } FLUSH_BLOCK(s, flush == Z_FINISH); return flush == Z_FINISH ? finish_done : block_done; } /* =========================================================================== * Same as above, but achieves better compression. We use a lazy * evaluation for matches: a match is finally adopted only if there is * no better match at the next window position. */ local block_state deflate_slow(s, flush) deflate_state *s; int flush; { IPos hash_head = NIL; /* head of hash chain */ int bflush; /* set if current block must be flushed */ /* Process the input block. */ for (;;) { /* Make sure that we always have enough lookahead, except * at the end of the input file. We need MAX_MATCH bytes * for the next match, plus MIN_MATCH bytes to insert the * string following the next match. */ if (s->lookahead < MIN_LOOKAHEAD) { fill_window(s); if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { return need_more; } if (s->lookahead == 0) break; /* flush the current block */ } /* Insert the string window[strstart .. strstart+2] in the * dictionary, and set hash_head to the head of the hash chain: */ if (s->lookahead >= MIN_MATCH) { INSERT_STRING(s, s->strstart, hash_head); } /* Find the longest match, discarding those <= prev_length. */ s->prev_length = s->match_length, s->prev_match = s->match_start; s->match_length = MIN_MATCH-1; if (hash_head != NIL && s->prev_length < s->max_lazy_match && s->strstart - hash_head <= MAX_DIST(s)) { /* To simplify the code, we prevent matches with the string * of window index 0 (in particular we have to avoid a match * of the string with itself at the start of the input file). */ if (s->strategy != Z_HUFFMAN_ONLY) { s->match_length = longest_match (s, hash_head); } /* longest_match() sets match_start */ if (s->match_length <= 5 && (s->strategy == Z_FILTERED || (s->match_length == MIN_MATCH && s->strstart - s->match_start > TOO_FAR))) { /* If prev_match is also MIN_MATCH, match_start is garbage * but we will ignore the current match anyway. */ s->match_length = MIN_MATCH-1; } } /* If there was a match at the previous step and the current * match is not better, output the previous match: */ if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; /* Do not insert strings in hash table beyond this. */ check_match(s, s->strstart-1, s->prev_match, s->prev_length); bflush = _tr_tally(s, s->strstart -1 - s->prev_match, s->prev_length - MIN_MATCH); /* Insert in hash table all strings up to the end of the match. * strstart-1 and strstart are already inserted. If there is not * enough lookahead, the last two strings are not inserted in * the hash table. */ s->lookahead -= s->prev_length-1; s->prev_length -= 2; do { if (++s->strstart <= max_insert) { INSERT_STRING(s, s->strstart, hash_head); } } while (--s->prev_length != 0); s->match_available = 0; s->match_length = MIN_MATCH-1; s->strstart++; if (bflush) FLUSH_BLOCK(s, 0); } else if (s->match_available) { /* If there was no match at the previous position, output a * single literal. If there was a match but the current match * is longer, truncate the previous match to a single literal. */ Tracevv((stderr,"%c", s->window[s->strstart-1])); if (_tr_tally (s, 0, s->window[s->strstart-1])) { FLUSH_BLOCK_ONLY(s, 0); } s->strstart++; s->lookahead--; if (s->strm->avail_out == 0) return need_more; } else { /* There is no previous match to compare with, wait for * the next step to decide. */ s->match_available = 1; s->strstart++; s->lookahead--; } } Assert (flush != Z_NO_FLUSH, "no flush?"); if (s->match_available) { Tracevv((stderr,"%c", s->window[s->strstart-1])); _tr_tally (s, 0, s->window[s->strstart-1]); s->match_available = 0; } FLUSH_BLOCK(s, flush == Z_FINISH); return flush == Z_FINISH ? finish_done : block_done; } /* --- deflate.c */ /* +++ trees.c */ /* trees.c -- output deflated data using Huffman coding * Copyright (C) 1995-1996 Jean-loup Gailly * For conditions of distribution and use, see copyright notice in zlib.h */ /* * ALGORITHM * * The "deflation" process uses several Huffman trees. The more * common source values are represented by shorter bit sequences. * * Each code tree is stored in a compressed form which is itself * a Huffman encoding of the lengths of all the code strings (in * ascending order by source values). The actual code strings are * reconstructed from the lengths in the inflate process, as described * in the deflate specification. * * REFERENCES * * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc * * Storer, James A. * Data Compression: Methods and Theory, pp. 49-50. * Computer Science Press, 1988. ISBN 0-7167-8156-5. * * Sedgewick, R. * Algorithms, p290. * Addison-Wesley, 1983. ISBN 0-201-06672-6. */ /* From: trees.c,v 1.11 1996/07/24 13:41:06 me Exp $ */ /* #include "deflate.h" */ #ifdef DEBUG_ZLIB # include #endif /* =========================================================================== * Constants */ #define MAX_BL_BITS 7 /* Bit length codes must not exceed MAX_BL_BITS bits */ #define END_BLOCK 256 /* end of block literal code */ #define REP_3_6 16 /* repeat previous bit length 3-6 times (2 bits of repeat count) */ #define REPZ_3_10 17 /* repeat a zero length 3-10 times (3 bits of repeat count) */ #define REPZ_11_138 18 /* repeat a zero length 11-138 times (7 bits of repeat count) */ local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; local int extra_dbits[D_CODES] /* extra bits for each distance code */ = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; local int extra_blbits[BL_CODES]/* extra bits for each bit length code */ = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; local uch bl_order[BL_CODES] = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; /* The lengths of the bit length codes are sent in order of decreasing * probability, to avoid transmitting the lengths for unused bit length codes. */ #define Buf_size (8 * 2*sizeof(char)) /* Number of bits used within bi_buf. (bi_buf might be implemented on * more than 16 bits on some systems.) */ /* =========================================================================== * Local data. These are initialized only once. */ local ct_data static_ltree[L_CODES+2]; /* The static literal tree. Since the bit lengths are imposed, there is no * need for the L_CODES extra codes used during heap construction. However * The codes 286 and 287 are needed to build a canonical tree (see _tr_init * below). */ local ct_data static_dtree[D_CODES]; /* The static distance tree. (Actually a trivial tree since all codes use * 5 bits.) */ local uch dist_code[512]; /* distance codes. The first 256 values correspond to the distances * 3 .. 258, the last 256 values correspond to the top 8 bits of * the 15 bit distances. */ local uch length_code[MAX_MATCH-MIN_MATCH+1]; /* length code for each normalized match length (0 == MIN_MATCH) */ local int base_length[LENGTH_CODES]; /* First normalized length for each code (0 = MIN_MATCH) */ local int base_dist[D_CODES]; /* First normalized distance for each code (0 = distance of 1) */ struct static_tree_desc_s { ct_data *static_tree; /* static tree or NULL */ intf *extra_bits; /* extra bits for each code or NULL */ int extra_base; /* base index for extra_bits */ int elems; /* max number of elements in the tree */ int max_length; /* max bit length for the codes */ }; local static_tree_desc static_l_desc = {static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; local static_tree_desc static_d_desc = {static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; local static_tree_desc static_bl_desc = {(ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; /* =========================================================================== * Local (static) routines in this file. */ local void tr_static_init OF((void)); local void init_block OF((deflate_state *s)); local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); local void build_tree OF((deflate_state *s, tree_desc *desc)); local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); local int build_bl_tree OF((deflate_state *s)); local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, int blcodes)); local void compress_block OF((deflate_state *s, ct_data *ltree, ct_data *dtree)); local void set_data_type OF((deflate_state *s)); local unsigned bi_reverse OF((unsigned value, int length)); local void bi_windup OF((deflate_state *s)); local void bi_flush OF((deflate_state *s)); local void copy_block OF((deflate_state *s, charf *buf, unsigned len, int header)); #ifndef DEBUG_ZLIB # define send_code(s, c, tree) send_bits(s, tree[(c)].Code, tree[(c)].Len) /* Send a code of the given tree. c and tree must not have side effects */ #else /* DEBUG_ZLIB */ # define send_code(s, c, tree) \ { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ send_bits(s, tree[c].Code, tree[c].Len); } #endif #define d_code(dist) \ ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)]) /* Mapping from a distance to a distance code. dist is the distance - 1 and * must not have side effects. dist_code[256] and dist_code[257] are never * used. */ /* =========================================================================== * Output a short LSB first on the stream. * IN assertion: there is enough room in pendingBuf. */ #define put_short(s, w) { \ put_byte(s, (uch)((w) & 0xff)); \ put_byte(s, (uch)((ush)(w) >> 8)); \ } /* =========================================================================== * Send a value on a given number of bits. * IN assertion: length <= 16 and value fits in length bits. */ #ifdef DEBUG_ZLIB local void send_bits OF((deflate_state *s, int value, int length)); local void send_bits(s, value, length) deflate_state *s; int value; /* value to send */ int length; /* number of bits */ { Tracevv((stderr," l %2d v %4x ", length, value)); Assert(length > 0 && length <= 15, "invalid length"); s->bits_sent += (ulg)length; /* If not enough room in bi_buf, use (valid) bits from bi_buf and * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) * unused bits in value. */ if (s->bi_valid > (int)Buf_size - length) { s->bi_buf |= (value << s->bi_valid); put_short(s, s->bi_buf); s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); s->bi_valid += length - Buf_size; } else { s->bi_buf |= value << s->bi_valid; s->bi_valid += length; } } #else /* !DEBUG_ZLIB */ #define send_bits(s, value, length) \ { int len = (length);\ if ((s)->bi_valid > (int)Buf_size - len) {\ int val = (value);\ (s)->bi_buf |= (val << (s)->bi_valid);\ put_short((s), (s)->bi_buf);\ (s)->bi_buf = (ush)val >> (Buf_size - (s)->bi_valid);\ (s)->bi_valid += len - Buf_size;\ } else {\ (s)->bi_buf |= (value) << (s)->bi_valid;\ (s)->bi_valid += len;\ }\ } #endif /* DEBUG_ZLIB */ /* the arguments must not have side effects */ /* =========================================================================== * Initialize the various 'constant' tables. In a multi-threaded environment, * this function may be called by two threads concurrently, but this is * harmless since both invocations do exactly the same thing. */ local void tr_static_init() { static int static_init_done = 0; int n; /* iterates over tree elements */ int bits; /* bit counter */ int length; /* length value */ int code; /* code value */ int dist; /* distance index */ ush bl_count[MAX_BITS+1]; /* number of codes at each bit length for an optimal tree */ if (static_init_done) return; /* Initialize the mapping length (0..255) -> length code (0..28) */ length = 0; for (code = 0; code < LENGTH_CODES-1; code++) { base_length[code] = length; for (n = 0; n < (1< dist code (0..29) */ dist = 0; for (code = 0 ; code < 16; code++) { base_dist[code] = dist; for (n = 0; n < (1<>= 7; /* from now on, all distances are divided by 128 */ for ( ; code < D_CODES; code++) { base_dist[code] = dist << 7; for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { dist_code[256 + dist++] = (uch)code; } } Assert (dist == 256, "tr_static_init: 256+dist != 512"); /* Construct the codes of the static literal tree */ for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; n = 0; while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; /* Codes 286 and 287 do not exist, but we must include them in the * tree construction to get a canonical Huffman tree (longest code * all ones) */ gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); /* The static distance tree is trivial: */ for (n = 0; n < D_CODES; n++) { static_dtree[n].Len = 5; static_dtree[n].Code = bi_reverse((unsigned)n, 5); } static_init_done = 1; } /* =========================================================================== * Initialize the tree data structures for a new zlib stream. */ void _tr_init(s) deflate_state *s; { tr_static_init(); s->compressed_len = 0L; s->l_desc.dyn_tree = s->dyn_ltree; s->l_desc.stat_desc = &static_l_desc; s->d_desc.dyn_tree = s->dyn_dtree; s->d_desc.stat_desc = &static_d_desc; s->bl_desc.dyn_tree = s->bl_tree; s->bl_desc.stat_desc = &static_bl_desc; s->bi_buf = 0; s->bi_valid = 0; s->last_eob_len = 8; /* enough lookahead for inflate */ #ifdef DEBUG_ZLIB s->bits_sent = 0L; #endif /* Initialize the first block of the first file: */ init_block(s); } /* =========================================================================== * Initialize a new block. */ local void init_block(s) deflate_state *s; { int n; /* iterates over tree elements */ /* Initialize the trees. */ for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; s->dyn_ltree[END_BLOCK].Freq = 1; s->opt_len = s->static_len = 0L; s->last_lit = s->matches = 0; } #define SMALLEST 1 /* Index within the heap array of least frequent node in the Huffman tree */ /* =========================================================================== * Remove the smallest element from the heap and recreate the heap with * one less element. Updates heap and heap_len. */ #define pqremove(s, tree, top) \ {\ top = s->heap[SMALLEST]; \ s->heap[SMALLEST] = s->heap[s->heap_len--]; \ pqdownheap(s, tree, SMALLEST); \ } /* =========================================================================== * Compares to subtrees, using the tree depth as tie breaker when * the subtrees have equal frequency. This minimizes the worst case length. */ #define smaller(tree, n, m, depth) \ (tree[n].Freq < tree[m].Freq || \ (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) /* =========================================================================== * Restore the heap property by moving down the tree starting at node k, * exchanging a node with the smallest of its two sons if necessary, stopping * when the heap property is re-established (each father smaller than its * two sons). */ local void pqdownheap(s, tree, k) deflate_state *s; ct_data *tree; /* the tree to restore */ int k; /* node to move down */ { int v = s->heap[k]; int j = k << 1; /* left son of k */ while (j <= s->heap_len) { /* Set j to the smallest of the two sons: */ if (j < s->heap_len && smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { j++; } /* Exit if v is smaller than both sons */ if (smaller(tree, v, s->heap[j], s->depth)) break; /* Exchange v with the smallest son */ s->heap[k] = s->heap[j]; k = j; /* And continue down the tree, setting j to the left son of k */ j <<= 1; } s->heap[k] = v; } /* =========================================================================== * Compute the optimal bit lengths for a tree and update the total bit length * for the current block. * IN assertion: the fields freq and dad are set, heap[heap_max] and * above are the tree nodes sorted by increasing frequency. * OUT assertions: the field len is set to the optimal bit length, the * array bl_count contains the frequencies for each bit length. * The length opt_len is updated; static_len is also updated if stree is * not null. */ local void gen_bitlen(s, desc) deflate_state *s; tree_desc *desc; /* the tree descriptor */ { ct_data *tree = desc->dyn_tree; int max_code = desc->max_code; ct_data *stree = desc->stat_desc->static_tree; intf *extra = desc->stat_desc->extra_bits; int base = desc->stat_desc->extra_base; int max_length = desc->stat_desc->max_length; int h; /* heap index */ int n, m; /* iterate over the tree elements */ int bits; /* bit length */ int xbits; /* extra bits */ ush f; /* frequency */ int overflow = 0; /* number of elements with bit length too large */ for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; /* In a first pass, compute the optimal bit lengths (which may * overflow in the case of the bit length tree). */ tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ for (h = s->heap_max+1; h < HEAP_SIZE; h++) { n = s->heap[h]; bits = tree[tree[n].Dad].Len + 1; if (bits > max_length) bits = max_length, overflow++; tree[n].Len = (ush)bits; /* We overwrite tree[n].Dad which is no longer needed */ if (n > max_code) continue; /* not a leaf node */ s->bl_count[bits]++; xbits = 0; if (n >= base) xbits = extra[n-base]; f = tree[n].Freq; s->opt_len += (ulg)f * (bits + xbits); if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); } if (overflow == 0) return; Trace((stderr,"\nbit length overflow\n")); /* This happens for example on obj2 and pic of the Calgary corpus */ /* Find the first bit length which could increase: */ do { bits = max_length-1; while (s->bl_count[bits] == 0) bits--; s->bl_count[bits]--; /* move one leaf down the tree */ s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ s->bl_count[max_length]--; /* The brother of the overflow item also moves one step up, * but this does not affect bl_count[max_length] */ overflow -= 2; } while (overflow > 0); /* Now recompute all bit lengths, scanning in increasing frequency. * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all * lengths instead of fixing only the wrong ones. This idea is taken * from 'ar' written by Haruhiko Okumura.) */ for (bits = max_length; bits != 0; bits--) { n = s->bl_count[bits]; while (n != 0) { m = s->heap[--h]; if (m > max_code) continue; if (tree[m].Len != (unsigned) bits) { Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); s->opt_len += ((long)bits - (long)tree[m].Len) *(long)tree[m].Freq; tree[m].Len = (ush)bits; } n--; } } } /* =========================================================================== * Generate the codes for a given tree and bit counts (which need not be * optimal). * IN assertion: the array bl_count contains the bit length statistics for * the given tree and the field len is set for all tree elements. * OUT assertion: the field code is set for all tree elements of non * zero code length. */ local void gen_codes (tree, max_code, bl_count) ct_data *tree; /* the tree to decorate */ int max_code; /* largest code with non zero frequency */ ushf *bl_count; /* number of codes at each bit length */ { ush next_code[MAX_BITS+1]; /* next code value for each bit length */ ush code = 0; /* running code value */ int bits; /* bit index */ int n; /* code index */ /* The distribution counts are first used to generate the code values * without bit reversal. */ for (bits = 1; bits <= MAX_BITS; bits++) { next_code[bits] = code = (code + bl_count[bits-1]) << 1; } /* Check that the bit counts in bl_count are consistent. The last code * must be all ones. */ Assert (code + bl_count[MAX_BITS]-1 == (1<dyn_tree; ct_data *stree = desc->stat_desc->static_tree; int elems = desc->stat_desc->elems; int n, m; /* iterate over heap elements */ int max_code = -1; /* largest code with non zero frequency */ int node; /* new node being created */ /* Construct the initial heap, with least frequent element in * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. * heap[0] is not used. */ s->heap_len = 0, s->heap_max = HEAP_SIZE; for (n = 0; n < elems; n++) { if (tree[n].Freq != 0) { s->heap[++(s->heap_len)] = max_code = n; s->depth[n] = 0; } else { tree[n].Len = 0; } } /* The pkzip format requires that at least one distance code exists, * and that at least one bit should be sent even if there is only one * possible code. So to avoid special checks later on we force at least * two codes of non zero frequency. */ while (s->heap_len < 2) { node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); tree[node].Freq = 1; s->depth[node] = 0; s->opt_len--; if (stree) s->static_len -= stree[node].Len; /* node is 0 or 1 so it does not have extra bits */ } desc->max_code = max_code; /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, * establish sub-heaps of increasing lengths: */ for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); /* Construct the Huffman tree by repeatedly combining the least two * frequent nodes. */ node = elems; /* next internal node of the tree */ do { pqremove(s, tree, n); /* n = node of least frequency */ m = s->heap[SMALLEST]; /* m = node of next least frequency */ s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ s->heap[--(s->heap_max)] = m; /* Create a new node father of n and m */ tree[node].Freq = tree[n].Freq + tree[m].Freq; s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1); tree[n].Dad = tree[m].Dad = (ush)node; #ifdef DUMP_BL_TREE if (tree == s->bl_tree) { fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); } #endif /* and insert the new node in the heap */ s->heap[SMALLEST] = node++; pqdownheap(s, tree, SMALLEST); } while (s->heap_len >= 2); s->heap[--(s->heap_max)] = s->heap[SMALLEST]; /* At this point, the fields freq and dad are set. We can now * generate the bit lengths. */ gen_bitlen(s, (tree_desc *)desc); /* The field len is now set, we can generate the bit codes */ gen_codes ((ct_data *)tree, max_code, s->bl_count); } /* =========================================================================== * Scan a literal or distance tree to determine the frequencies of the codes * in the bit length tree. */ local void scan_tree (s, tree, max_code) deflate_state *s; ct_data *tree; /* the tree to be scanned */ int max_code; /* and its largest code of non zero frequency */ { int n; /* iterates over all tree elements */ int prevlen = -1; /* last emitted length */ int curlen; /* length of current code */ int nextlen = tree[0].Len; /* length of next code */ int count = 0; /* repeat count of the current code */ int max_count = 7; /* max repeat count */ int min_count = 4; /* min repeat count */ if (nextlen == 0) max_count = 138, min_count = 3; tree[max_code+1].Len = (ush)0xffff; /* guard */ for (n = 0; n <= max_code; n++) { curlen = nextlen; nextlen = tree[n+1].Len; if (++count < max_count && curlen == nextlen) { continue; } else if (count < min_count) { s->bl_tree[curlen].Freq += count; } else if (curlen != 0) { if (curlen != prevlen) s->bl_tree[curlen].Freq++; s->bl_tree[REP_3_6].Freq++; } else if (count <= 10) { s->bl_tree[REPZ_3_10].Freq++; } else { s->bl_tree[REPZ_11_138].Freq++; } count = 0; prevlen = curlen; if (nextlen == 0) { max_count = 138, min_count = 3; } else if (curlen == nextlen) { max_count = 6, min_count = 3; } else { max_count = 7, min_count = 4; } } } /* =========================================================================== * Send a literal or distance tree in compressed form, using the codes in * bl_tree. */ local void send_tree (s, tree, max_code) deflate_state *s; ct_data *tree; /* the tree to be scanned */ int max_code; /* and its largest code of non zero frequency */ { int n; /* iterates over all tree elements */ int prevlen = -1; /* last emitted length */ int curlen; /* length of current code */ int nextlen = tree[0].Len; /* length of next code */ int count = 0; /* repeat count of the current code */ int max_count = 7; /* max repeat count */ int min_count = 4; /* min repeat count */ /* tree[max_code+1].Len = -1; */ /* guard already set */ if (nextlen == 0) max_count = 138, min_count = 3; for (n = 0; n <= max_code; n++) { curlen = nextlen; nextlen = tree[n+1].Len; if (++count < max_count && curlen == nextlen) { continue; } else if (count < min_count) { do { send_code(s, curlen, s->bl_tree); } while (--count != 0); } else if (curlen != 0) { if (curlen != prevlen) { send_code(s, curlen, s->bl_tree); count--; } Assert(count >= 3 && count <= 6, " 3_6?"); send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); } else if (count <= 10) { send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); } else { send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); } count = 0; prevlen = curlen; if (nextlen == 0) { max_count = 138, min_count = 3; } else if (curlen == nextlen) { max_count = 6, min_count = 3; } else { max_count = 7, min_count = 4; } } } /* =========================================================================== * Construct the Huffman tree for the bit lengths and return the index in * bl_order of the last bit length code to send. */ local int build_bl_tree(s) deflate_state *s; { int max_blindex; /* index of last bit length code of non zero freq */ /* Determine the bit length frequencies for literal and distance trees */ scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); /* Build the bit length tree: */ build_tree(s, (tree_desc *)(&(s->bl_desc))); /* opt_len now includes the length of the tree representations, except * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. */ /* Determine the number of bit length codes to send. The pkzip format * requires that at least 4 bit length codes be sent. (appnote.txt says * 3 but the actual value used is 4.) */ for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; } /* Update opt_len to include the bit length tree and counts */ s->opt_len += 3*(max_blindex+1) + 5+5+4; Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", s->opt_len, s->static_len)); return max_blindex; } /* =========================================================================== * Send the header for a block using dynamic Huffman trees: the counts, the * lengths of the bit length codes, the literal tree and the distance tree. * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. */ local void send_all_trees(s, lcodes, dcodes, blcodes) deflate_state *s; int lcodes, dcodes, blcodes; /* number of codes for each tree */ { int rank; /* index in bl_order */ Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, "too many codes"); Tracev((stderr, "\nbl counts: ")); send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ send_bits(s, dcodes-1, 5); send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ for (rank = 0; rank < blcodes; rank++) { Tracev((stderr, "\nbl code %2d ", bl_order[rank])); send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); } Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); } /* =========================================================================== * Send a stored block */ void _tr_stored_block(s, buf, stored_len, eof) deflate_state *s; charf *buf; /* input block */ ulg stored_len; /* length of input block */ int eof; /* true if this is the last block for a file */ { send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */ s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; s->compressed_len += (stored_len + 4) << 3; copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ } /* Send just the `stored block' type code without any length bytes or data. */ void _tr_stored_type_only(s) deflate_state *s; { send_bits(s, (STORED_BLOCK << 1), 3); bi_windup(s); s->compressed_len = (s->compressed_len + 3) & ~7L; } /* =========================================================================== * Send one empty static block to give enough lookahead for inflate. * This takes 10 bits, of which 7 may remain in the bit buffer. * The current inflate code requires 9 bits of lookahead. If the * last two codes for the previous block (real code plus EOB) were coded * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode * the last real code. In this case we send two empty static blocks instead * of one. (There are no problems if the previous block is stored or fixed.) * To simplify the code, we assume the worst case of last real code encoded * on one bit only. */ void _tr_align(s) deflate_state *s; { send_bits(s, STATIC_TREES<<1, 3); send_code(s, END_BLOCK, static_ltree); s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ bi_flush(s); /* Of the 10 bits for the empty block, we have already sent * (10 - bi_valid) bits. The lookahead for the last real code (before * the EOB of the previous block) was thus at least one plus the length * of the EOB plus what we have just sent of the empty static block. */ if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { send_bits(s, STATIC_TREES<<1, 3); send_code(s, END_BLOCK, static_ltree); s->compressed_len += 10L; bi_flush(s); } s->last_eob_len = 7; } /* =========================================================================== * Determine the best encoding for the current block: dynamic trees, static * trees or store, and output the encoded block to the zip file. This function * returns the total compressed length for the file so far. */ ulg _tr_flush_block(s, buf, stored_len, eof) deflate_state *s; charf *buf; /* input block, or NULL if too old */ ulg stored_len; /* length of input block */ int eof; /* true if this is the last block for a file */ { ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ int max_blindex = 0; /* index of last bit length code of non zero freq */ /* Build the Huffman trees unless a stored block is forced */ if (s->level > 0) { /* Check if the file is ascii or binary */ if (s->data_type == Z_UNKNOWN) set_data_type(s); /* Construct the literal and distance trees */ build_tree(s, (tree_desc *)(&(s->l_desc))); Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, s->static_len)); build_tree(s, (tree_desc *)(&(s->d_desc))); Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, s->static_len)); /* At this point, opt_len and static_len are the total bit lengths of * the compressed block data, excluding the tree representations. */ /* Build the bit length tree for the above two trees, and get the index * in bl_order of the last bit length code to send. */ max_blindex = build_bl_tree(s); /* Determine the best encoding. Compute first the block length in bytes*/ opt_lenb = (s->opt_len+3+7)>>3; static_lenb = (s->static_len+3+7)>>3; Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, s->last_lit)); if (static_lenb <= opt_lenb) opt_lenb = static_lenb; } else { Assert(buf != (char*)0, "lost buf"); opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ } /* If compression failed and this is the first and last block, * and if the .zip file can be seeked (to rewrite the local header), * the whole file is transformed into a stored file: */ #ifdef STORED_FILE_OK # ifdef FORCE_STORED_FILE if (eof && s->compressed_len == 0L) { /* force stored file */ # else if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) { # endif /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */ if (buf == (charf*)0) error ("block vanished"); copy_block(s, buf, (unsigned)stored_len, 0); /* without header */ s->compressed_len = stored_len << 3; s->method = STORED; } else #endif /* STORED_FILE_OK */ #ifdef FORCE_STORED if (buf != (char*)0) { /* force stored block */ #else if (stored_len+4 <= opt_lenb && buf != (char*)0) { /* 4: two words for the lengths */ #endif /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. * Otherwise we can't have processed more than WSIZE input bytes since * the last block flush, because compression would have been * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to * transform a block into a stored block. */ _tr_stored_block(s, buf, stored_len, eof); #ifdef FORCE_STATIC } else if (static_lenb >= 0) { /* force static trees */ #else } else if (static_lenb == opt_lenb) { #endif send_bits(s, (STATIC_TREES<<1)+eof, 3); compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); s->compressed_len += 3 + s->static_len; } else { send_bits(s, (DYN_TREES<<1)+eof, 3); send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, max_blindex+1); compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); s->compressed_len += 3 + s->opt_len; } Assert (s->compressed_len == s->bits_sent, "bad compressed size"); init_block(s); if (eof) { bi_windup(s); s->compressed_len += 7; /* align on byte boundary */ } Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, s->compressed_len-7*eof)); return s->compressed_len >> 3; } /* =========================================================================== * Save the match info and tally the frequency counts. Return true if * the current block must be flushed. */ int _tr_tally (s, dist, lc) deflate_state *s; unsigned dist; /* distance of matched string */ unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ { s->d_buf[s->last_lit] = (ush)dist; s->l_buf[s->last_lit++] = (uch)lc; if (dist == 0) { /* lc is the unmatched char */ s->dyn_ltree[lc].Freq++; } else { s->matches++; /* Here, lc is the match length - MIN_MATCH */ dist--; /* dist = match distance - 1 */ Assert((ush)dist < (ush)MAX_DIST(s) && (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++; s->dyn_dtree[d_code(dist)].Freq++; } /* Try to guess if it is profitable to stop the current block here */ if (s->level > 2 && (s->last_lit & 0xfff) == 0) { /* Compute an upper bound for the compressed length */ ulg out_length = (ulg)s->last_lit*8L; ulg in_length = (ulg)((long)s->strstart - s->block_start); int dcode; for (dcode = 0; dcode < D_CODES; dcode++) { out_length += (ulg)s->dyn_dtree[dcode].Freq * (5L+extra_dbits[dcode]); } out_length >>= 3; Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", s->last_lit, in_length, out_length, 100L - out_length*100L/in_length)); if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; } return (s->last_lit == s->lit_bufsize-1); /* We avoid equality with lit_bufsize because of wraparound at 64K * on 16 bit machines and because stored blocks are restricted to * 64K-1 bytes. */ } /* =========================================================================== * Send the block data compressed using the given Huffman trees */ local void compress_block(s, ltree, dtree) deflate_state *s; ct_data *ltree; /* literal tree */ ct_data *dtree; /* distance tree */ { unsigned dist; /* distance of matched string */ int lc; /* match length or unmatched char (if dist == 0) */ unsigned lx = 0; /* running index in l_buf */ unsigned code; /* the code to send */ int extra; /* number of extra bits to send */ if (s->last_lit != 0) do { dist = s->d_buf[lx]; lc = s->l_buf[lx++]; if (dist == 0) { send_code(s, lc, ltree); /* send a literal byte */ Tracecv(isgraph(lc), (stderr," '%c' ", lc)); } else { /* Here, lc is the match length - MIN_MATCH */ code = length_code[lc]; send_code(s, code+LITERALS+1, ltree); /* send the length code */ extra = extra_lbits[code]; if (extra != 0) { lc -= base_length[code]; send_bits(s, lc, extra); /* send the extra length bits */ } dist--; /* dist is now the match distance - 1 */ code = d_code(dist); Assert (code < D_CODES, "bad d_code"); send_code(s, code, dtree); /* send the distance code */ extra = extra_dbits[code]; if (extra != 0) { dist -= base_dist[code]; send_bits(s, dist, extra); /* send the extra distance bits */ } } /* literal or match pair ? */ /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow"); } while (lx < s->last_lit); send_code(s, END_BLOCK, ltree); s->last_eob_len = ltree[END_BLOCK].Len; } /* =========================================================================== * Set the data type to ASCII or BINARY, using a crude approximation: * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise. * IN assertion: the fields freq of dyn_ltree are set and the total of all * frequencies does not exceed 64K (to fit in an int on 16 bit machines). */ local void set_data_type(s) deflate_state *s; { int n = 0; unsigned ascii_freq = 0; unsigned bin_freq = 0; while (n < 7) bin_freq += s->dyn_ltree[n++].Freq; while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq; while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq; s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII); } /* =========================================================================== * Reverse the first len bits of a code, using straightforward code (a faster * method would use a table) * IN assertion: 1 <= len <= 15 */ local unsigned bi_reverse(code, len) unsigned code; /* the value to invert */ int len; /* its bit length */ { unsigned res = 0; do { res |= code & 1; code >>= 1, res <<= 1; } while (--len > 0); return res >> 1; } /* =========================================================================== * Flush the bit buffer, keeping at most 7 bits in it. */ local void bi_flush(s) deflate_state *s; { if (s->bi_valid == 16) { put_short(s, s->bi_buf); s->bi_buf = 0; s->bi_valid = 0; } else if (s->bi_valid >= 8) { put_byte(s, (Byte)s->bi_buf); s->bi_buf >>= 8; s->bi_valid -= 8; } } /* =========================================================================== * Flush the bit buffer and align the output on a byte boundary */ local void bi_windup(s) deflate_state *s; { if (s->bi_valid > 8) { put_short(s, s->bi_buf); } else if (s->bi_valid > 0) { put_byte(s, (Byte)s->bi_buf); } s->bi_buf = 0; s->bi_valid = 0; #ifdef DEBUG_ZLIB s->bits_sent = (s->bits_sent+7) & ~7; #endif } /* =========================================================================== * Copy a stored block, storing first the length and its * one's complement if requested. */ local void copy_block(s, buf, len, header) deflate_state *s; charf *buf; /* the input data */ unsigned len; /* its length */ int header; /* true if block header must be written */ { bi_windup(s); /* align on byte boundary */ s->last_eob_len = 8; /* enough lookahead for inflate */ if (header) { put_short(s, (ush)len); put_short(s, (ush)~len); #ifdef DEBUG_ZLIB s->bits_sent += 2*16; #endif } #ifdef DEBUG_ZLIB s->bits_sent += (ulg)len<<3; #endif /* bundle up the put_byte(s, *buf++) calls */ zmemcpy(&s->pending_buf[s->pending], buf, len); s->pending += len; } /* --- trees.c */ /* +++ inflate.c */ /* inflate.c -- zlib interface to inflate modules * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* #include "zutil.h" */ /* +++ infblock.h */ /* infblock.h -- header to use infblock.c * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* WARNING: this file should *not* be used by applications. It is part of the implementation of the compression library and is subject to change. Applications should only use zlib.h. */ struct inflate_blocks_state; typedef struct inflate_blocks_state FAR inflate_blocks_statef; extern inflate_blocks_statef * inflate_blocks_new OF(( z_streamp z, check_func c, /* check function */ uInt w)); /* window size */ extern int inflate_blocks OF(( inflate_blocks_statef *, z_streamp , int)); /* initial return code */ extern void inflate_blocks_reset OF(( inflate_blocks_statef *, z_streamp , uLongf *)); /* check value on output */ extern int inflate_blocks_free OF(( inflate_blocks_statef *, z_streamp , uLongf *)); /* check value on output */ extern void inflate_set_dictionary OF(( inflate_blocks_statef *s, const Bytef *d, /* dictionary */ uInt n)); /* dictionary length */ extern int inflate_addhistory OF(( inflate_blocks_statef *, z_streamp)); extern int inflate_packet_flush OF(( inflate_blocks_statef *)); /* --- infblock.h */ #ifndef NO_DUMMY_DECL struct inflate_blocks_state {int dummy;}; /* for buggy compilers */ #endif /* inflate private state */ struct internal_state { /* mode */ enum { METHOD, /* waiting for method byte */ FLAG, /* waiting for flag byte */ DICT4, /* four dictionary check bytes to go */ DICT3, /* three dictionary check bytes to go */ DICT2, /* two dictionary check bytes to go */ DICT1, /* one dictionary check byte to go */ DICT0, /* waiting for inflateSetDictionary */ BLOCKS, /* decompressing blocks */ CHECK4, /* four check bytes to go */ CHECK3, /* three check bytes to go */ CHECK2, /* two check bytes to go */ CHECK1, /* one check byte to go */ DONE, /* finished check, done */ BAD} /* got an error--stay here */ mode; /* current inflate mode */ /* mode dependent information */ union { uInt method; /* if FLAGS, method byte */ struct { uLong was; /* computed check value */ uLong need; /* stream check value */ } check; /* if CHECK, check values to compare */ uInt marker; /* if BAD, inflateSync's marker bytes count */ } sub; /* submode */ /* mode independent information */ int nowrap; /* flag for no wrapper */ uInt wbits; /* log2(window size) (8..15, defaults to 15) */ inflate_blocks_statef *blocks; /* current inflate_blocks state */ }; int inflateReset(z) z_streamp z; { uLong c; if (z == Z_NULL || z->state == Z_NULL) return Z_STREAM_ERROR; z->total_in = z->total_out = 0; z->msg = Z_NULL; z->state->mode = z->state->nowrap ? BLOCKS : METHOD; inflate_blocks_reset(z->state->blocks, z, &c); Trace((stderr, "inflate: reset\n")); return Z_OK; } int inflateEnd(z) z_streamp z; { uLong c; if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) return Z_STREAM_ERROR; if (z->state->blocks != Z_NULL) inflate_blocks_free(z->state->blocks, z, &c); ZFREE(z, z->state); z->state = Z_NULL; Trace((stderr, "inflate: end\n")); return Z_OK; } int inflateInit2_(z, w, version, stream_size) z_streamp z; int w; const char *version; int stream_size; { if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || stream_size != sizeof(z_stream)) return Z_VERSION_ERROR; /* initialize state */ if (z == Z_NULL) return Z_STREAM_ERROR; z->msg = Z_NULL; #ifndef NO_ZCFUNCS if (z->zalloc == Z_NULL) { z->zalloc = zcalloc; z->opaque = (voidpf)0; } if (z->zfree == Z_NULL) z->zfree = zcfree; #endif if ((z->state = (struct internal_state FAR *) ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) return Z_MEM_ERROR; z->state->blocks = Z_NULL; /* handle undocumented nowrap option (no zlib header or check) */ z->state->nowrap = 0; if (w < 0) { w = - w; z->state->nowrap = 1; } /* set window size */ if (w < 8 || w > 15) { inflateEnd(z); return Z_STREAM_ERROR; } z->state->wbits = (uInt)w; /* create inflate_blocks state */ if ((z->state->blocks = inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w)) == Z_NULL) { inflateEnd(z); return Z_MEM_ERROR; } Trace((stderr, "inflate: allocated\n")); /* reset state */ inflateReset(z); return Z_OK; } int inflateInit_(z, version, stream_size) z_streamp z; const char *version; int stream_size; { return inflateInit2_(z, DEF_WBITS, version, stream_size); } #define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;} #define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) int inflate(z, f) z_streamp z; int f; { int r; uInt b; if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0) return Z_STREAM_ERROR; r = Z_BUF_ERROR; while (1) switch (z->state->mode) { case METHOD: NEEDBYTE if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED) { z->state->mode = BAD; z->msg = (char*)"unknown compression method"; z->state->sub.marker = 5; /* can't try inflateSync */ break; } if ((z->state->sub.method >> 4) + 8 > z->state->wbits) { z->state->mode = BAD; z->msg = (char*)"invalid window size"; z->state->sub.marker = 5; /* can't try inflateSync */ break; } z->state->mode = FLAG; case FLAG: NEEDBYTE b = NEXTBYTE; if (((z->state->sub.method << 8) + b) % 31) { z->state->mode = BAD; z->msg = (char*)"incorrect header check"; z->state->sub.marker = 5; /* can't try inflateSync */ break; } Trace((stderr, "inflate: zlib header ok\n")); if (!(b & PRESET_DICT)) { z->state->mode = BLOCKS; break; } z->state->mode = DICT4; case DICT4: NEEDBYTE z->state->sub.check.need = (uLong)NEXTBYTE << 24; z->state->mode = DICT3; case DICT3: NEEDBYTE z->state->sub.check.need += (uLong)NEXTBYTE << 16; z->state->mode = DICT2; case DICT2: NEEDBYTE z->state->sub.check.need += (uLong)NEXTBYTE << 8; z->state->mode = DICT1; case DICT1: NEEDBYTE z->state->sub.check.need += (uLong)NEXTBYTE; z->adler = z->state->sub.check.need; z->state->mode = DICT0; return Z_NEED_DICT; case DICT0: z->state->mode = BAD; z->msg = (char*)"need dictionary"; z->state->sub.marker = 0; /* can try inflateSync */ return Z_STREAM_ERROR; case BLOCKS: r = inflate_blocks(z->state->blocks, z, r); if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) r = inflate_packet_flush(z->state->blocks); if (r == Z_DATA_ERROR) { z->state->mode = BAD; z->state->sub.marker = 0; /* can try inflateSync */ break; } if (r != Z_STREAM_END) return r; r = Z_OK; inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); if (z->state->nowrap) { z->state->mode = DONE; break; } z->state->mode = CHECK4; case CHECK4: NEEDBYTE z->state->sub.check.need = (uLong)NEXTBYTE << 24; z->state->mode = CHECK3; case CHECK3: NEEDBYTE z->state->sub.check.need += (uLong)NEXTBYTE << 16; z->state->mode = CHECK2; case CHECK2: NEEDBYTE z->state->sub.check.need += (uLong)NEXTBYTE << 8; z->state->mode = CHECK1; case CHECK1: NEEDBYTE z->state->sub.check.need += (uLong)NEXTBYTE; if (z->state->sub.check.was != z->state->sub.check.need) { z->state->mode = BAD; z->msg = (char*)"incorrect data check"; z->state->sub.marker = 5; /* can't try inflateSync */ break; } Trace((stderr, "inflate: zlib check ok\n")); z->state->mode = DONE; case DONE: return Z_STREAM_END; case BAD: return Z_DATA_ERROR; default: return Z_STREAM_ERROR; } empty: if (f != Z_PACKET_FLUSH) return r; z->state->mode = BAD; z->msg = (char *)"need more for packet flush"; z->state->sub.marker = 0; /* can try inflateSync */ return Z_DATA_ERROR; } int inflateSetDictionary(z, dictionary, dictLength) z_streamp z; const Bytef *dictionary; uInt dictLength; { uInt length = dictLength; if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0) return Z_STREAM_ERROR; if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR; z->adler = 1L; if (length >= ((uInt)1<state->wbits)) { length = (1<state->wbits)-1; dictionary += dictLength - length; } inflate_set_dictionary(z->state->blocks, dictionary, length); z->state->mode = BLOCKS; return Z_OK; } /* * This subroutine adds the data at next_in/avail_in to the output history * without performing any output. The output buffer must be "caught up"; * i.e. no pending output (hence s->read equals s->write), and the state must * be BLOCKS (i.e. we should be willing to see the start of a series of * BLOCKS). On exit, the output will also be caught up, and the checksum * will have been updated if need be. */ int inflateIncomp(z) z_stream *z; { if (z->state->mode != BLOCKS) return Z_DATA_ERROR; return inflate_addhistory(z->state->blocks, z); } int inflateSync(z) z_streamp z; { uInt n; /* number of bytes to look at */ Bytef *p; /* pointer to bytes */ uInt m; /* number of marker bytes found in a row */ uLong r, w; /* temporaries to save total_in and total_out */ /* set up */ if (z == Z_NULL || z->state == Z_NULL) return Z_STREAM_ERROR; if (z->state->mode != BAD) { z->state->mode = BAD; z->state->sub.marker = 0; } if ((n = z->avail_in) == 0) return Z_BUF_ERROR; p = z->next_in; m = z->state->sub.marker; /* search */ while (n && m < 4) { if (*p == (Byte)(m < 2 ? 0 : 0xff)) m++; else if (*p) m = 0; else m = 4 - m; p++, n--; } /* restore */ z->total_in += p - z->next_in; z->next_in = p; z->avail_in = n; z->state->sub.marker = m; /* return no joy or set up to restart on a new block */ if (m != 4) return Z_DATA_ERROR; r = z->total_in; w = z->total_out; inflateReset(z); z->total_in = r; z->total_out = w; z->state->mode = BLOCKS; return Z_OK; } #undef NEEDBYTE #undef NEXTBYTE /* --- inflate.c */ /* +++ infblock.c */ /* infblock.c -- interpret and process block types to last block * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* #include "zutil.h" */ /* #include "infblock.h" */ /* +++ inftrees.h */ /* inftrees.h -- header to use inftrees.c * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* WARNING: this file should *not* be used by applications. It is part of the implementation of the compression library and is subject to change. Applications should only use zlib.h. */ /* Huffman code lookup table entry--this entry is four bytes for machines that have 16-bit pointers (e.g. PC's in the small or medium model). */ typedef struct inflate_huft_s FAR inflate_huft; struct inflate_huft_s { union { struct { Byte Exop; /* number of extra bits or operation */ Byte Bits; /* number of bits in this code or subcode */ } what; Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ } word; /* 16-bit, 8 bytes for 32-bit machines) */ union { uInt Base; /* literal, length base, or distance base */ inflate_huft *Next; /* pointer to next level of table */ } more; }; #ifdef DEBUG_ZLIB extern uInt inflate_hufts; #endif extern int inflate_trees_bits OF(( uIntf *, /* 19 code lengths */ uIntf *, /* bits tree desired/actual depth */ inflate_huft * FAR *, /* bits tree result */ z_streamp )); /* for zalloc, zfree functions */ extern int inflate_trees_dynamic OF(( uInt, /* number of literal/length codes */ uInt, /* number of distance codes */ uIntf *, /* that many (total) code lengths */ uIntf *, /* literal desired/actual bit depth */ uIntf *, /* distance desired/actual bit depth */ inflate_huft * FAR *, /* literal/length tree result */ inflate_huft * FAR *, /* distance tree result */ z_streamp )); /* for zalloc, zfree functions */ extern int inflate_trees_fixed OF(( uIntf *, /* literal desired/actual bit depth */ uIntf *, /* distance desired/actual bit depth */ inflate_huft * FAR *, /* literal/length tree result */ inflate_huft * FAR *)); /* distance tree result */ extern int inflate_trees_free OF(( inflate_huft *, /* tables to free */ z_streamp )); /* for zfree function */ /* --- inftrees.h */ /* +++ infcodes.h */ /* infcodes.h -- header to use infcodes.c * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* WARNING: this file should *not* be used by applications. It is part of the implementation of the compression library and is subject to change. Applications should only use zlib.h. */ struct inflate_codes_state; typedef struct inflate_codes_state FAR inflate_codes_statef; extern inflate_codes_statef *inflate_codes_new OF(( uInt, uInt, inflate_huft *, inflate_huft *, z_streamp )); extern int inflate_codes OF(( inflate_blocks_statef *, z_streamp , int)); extern void inflate_codes_free OF(( inflate_codes_statef *, z_streamp )); /* --- infcodes.h */ /* +++ infutil.h */ /* infutil.h -- types and macros common to blocks and codes * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* WARNING: this file should *not* be used by applications. It is part of the implementation of the compression library and is subject to change. Applications should only use zlib.h. */ #ifndef _INFUTIL_H #define _INFUTIL_H typedef enum { TYPE, /* get type bits (3, including end bit) */ LENS, /* get lengths for stored */ STORED, /* processing stored block */ TABLE, /* get table lengths */ BTREE, /* get bit lengths tree for a dynamic block */ DTREE, /* get length, distance trees for a dynamic block */ CODES, /* processing fixed or dynamic block */ DRY, /* output remaining window bytes */ DONEB, /* finished last block, done */ BADB} /* got a data error--stuck here */ inflate_block_mode; /* inflate blocks semi-private state */ struct inflate_blocks_state { /* mode */ inflate_block_mode mode; /* current inflate_block mode */ /* mode dependent information */ union { uInt left; /* if STORED, bytes left to copy */ struct { uInt table; /* table lengths (14 bits) */ uInt index; /* index into blens (or border) */ uIntf *blens; /* bit lengths of codes */ uInt bb; /* bit length tree depth */ inflate_huft *tb; /* bit length decoding tree */ } trees; /* if DTREE, decoding info for trees */ struct { inflate_huft *tl; inflate_huft *td; /* trees to free */ inflate_codes_statef *codes; } decode; /* if CODES, current state */ } sub; /* submode */ uInt last; /* true if this block is the last block */ /* mode independent information */ uInt bitk; /* bits in bit buffer */ uLong bitb; /* bit buffer */ Bytef *window; /* sliding window */ Bytef *end; /* one byte after sliding window */ Bytef *read; /* window read pointer */ Bytef *write; /* window write pointer */ check_func checkfn; /* check function */ uLong check; /* check on output */ }; /* defines for inflate input/output */ /* update pointers and return */ #define UPDBITS {s->bitb=b;s->bitk=k;} #define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} #define UPDOUT {s->write=q;} #define UPDATE {UPDBITS UPDIN UPDOUT} #define LEAVE {UPDATE return inflate_flush(s,z,r);} /* get bytes and bits */ #define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} #define NEEDBYTE {if(n)r=Z_OK;else LEAVE} #define NEXTBYTE (n--,*p++) #define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<>=(j);k-=(j);} /* output bytes */ #define WAVAIL (uInt)(qread?s->read-q-1:s->end-q) #define LOADOUT {q=s->write;m=(uInt)WAVAIL;} #define WWRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} #define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} #define NEEDOUT {if(m==0){WWRAP if(m==0){FLUSH WWRAP if(m==0) LEAVE}}r=Z_OK;} #define OUTBYTE(a) {*q++=(Byte)(a);m--;} /* load local pointers */ #define LOAD {LOADIN LOADOUT} /* masks for lower bits (size given to avoid silly warnings with Visual C++) */ extern uInt inflate_mask[17]; /* copy as much as possible from the sliding window to the output area */ extern int inflate_flush OF(( inflate_blocks_statef *, z_streamp , int)); #ifndef NO_DUMMY_DECL struct internal_state {int dummy;}; /* for buggy compilers */ #endif #endif /* --- infutil.h */ #ifndef NO_DUMMY_DECL struct inflate_codes_state {int dummy;}; /* for buggy compilers */ #endif /* Table for deflate from PKZIP's appnote.txt. */ local const uInt border[] = { /* Order of the bit length code lengths */ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; /* Notes beyond the 1.93a appnote.txt: 1. Distance pointers never point before the beginning of the output stream. 2. Distance pointers can point back across blocks, up to 32k away. 3. There is an implied maximum of 7 bits for the bit length table and 15 bits for the actual data. 4. If only one code exists, then it is encoded using one bit. (Zero would be more efficient, but perhaps a little confusing.) If two codes exist, they are coded using one bit each (0 and 1). 5. There is no way of sending zero distance codes--a dummy must be sent if there are none. (History: a pre 2.0 version of PKZIP would store blocks with no distance codes, but this was discovered to be too harsh a criterion.) Valid only for 1.93a. 2.04c does allow zero distance codes, which is sent as one code of zero bits in length. 6. There are up to 286 literal/length codes. Code 256 represents the end-of-block. Note however that the static length tree defines 288 codes just to fill out the Huffman codes. Codes 286 and 287 cannot be used though, since there is no length base or extra bits defined for them. Similarily, there are up to 30 distance codes. However, static trees define 32 codes (all 5 bits) to fill out the Huffman codes, but the last two had better not show up in the data. 7. Unzip can check dynamic Huffman blocks for complete code sets. The exception is that a single code would not be complete (see #4). 8. The five bits following the block type is really the number of literal codes sent minus 257. 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits (1+6+6). Therefore, to output three times the length, you output three codes (1+1+1), whereas to output four times the same length, you only need two codes (1+3). Hmm. 10. In the tree reconstruction algorithm, Code = Code + Increment only if BitLength(i) is not zero. (Pretty obvious.) 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) 12. Note: length code 284 can represent 227-258, but length code 285 really is 258. The last length deserves its own, short code since it gets used a lot in very redundant files. The length 258 is special since 258 - 3 (the min match length) is 255. 13. The literal/length and distance code bit lengths are read as a single stream of lengths. It is possible (and advantageous) for a repeat code (16, 17, or 18) to go across the boundary between the two sets of lengths. */ void inflate_blocks_reset(s, z, c) inflate_blocks_statef *s; z_streamp z; uLongf *c; { if (s->checkfn != Z_NULL) *c = s->check; if (s->mode == BTREE || s->mode == DTREE) ZFREE(z, s->sub.trees.blens); if (s->mode == CODES) { inflate_codes_free(s->sub.decode.codes, z); inflate_trees_free(s->sub.decode.td, z); inflate_trees_free(s->sub.decode.tl, z); } s->mode = TYPE; s->bitk = 0; s->bitb = 0; s->read = s->write = s->window; if (s->checkfn != Z_NULL) z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0); Trace((stderr, "inflate: blocks reset\n")); } inflate_blocks_statef *inflate_blocks_new(z, c, w) z_streamp z; check_func c; uInt w; { inflate_blocks_statef *s; if ((s = (inflate_blocks_statef *)ZALLOC (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) return s; if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) { ZFREE(z, s); return Z_NULL; } s->end = s->window + w; s->checkfn = c; s->mode = TYPE; Trace((stderr, "inflate: blocks allocated\n")); inflate_blocks_reset(s, z, &s->check); return s; } #ifdef DEBUG_ZLIB extern uInt inflate_hufts; #endif int inflate_blocks(s, z, r) inflate_blocks_statef *s; z_streamp z; int r; { uInt t; /* temporary storage */ uLong b; /* bit buffer */ uInt k; /* bits in bit buffer */ Bytef *p; /* input data pointer */ uInt n; /* bytes available there */ Bytef *q; /* output window write pointer */ uInt m; /* bytes to end of window or read pointer */ /* copy input/output information to locals (UPDATE macro restores) */ LOAD /* process input based on current state */ while (1) switch (s->mode) { case TYPE: NEEDBITS(3) t = (uInt)b & 7; s->last = t & 1; switch (t >> 1) { case 0: /* stored */ Trace((stderr, "inflate: stored block%s\n", s->last ? " (last)" : "")); DUMPBITS(3) t = k & 7; /* go to byte boundary */ DUMPBITS(t) s->mode = LENS; /* get length of stored block */ break; case 1: /* fixed */ Trace((stderr, "inflate: fixed codes block%s\n", s->last ? " (last)" : "")); { uInt bl, bd; inflate_huft *tl, *td; inflate_trees_fixed(&bl, &bd, &tl, &td); s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); if (s->sub.decode.codes == Z_NULL) { r = Z_MEM_ERROR; LEAVE } s->sub.decode.tl = Z_NULL; /* don't try to free these */ s->sub.decode.td = Z_NULL; } DUMPBITS(3) s->mode = CODES; break; case 2: /* dynamic */ Trace((stderr, "inflate: dynamic codes block%s\n", s->last ? " (last)" : "")); DUMPBITS(3) s->mode = TABLE; break; case 3: /* illegal */ DUMPBITS(3) s->mode = BADB; z->msg = (char*)"invalid block type"; r = Z_DATA_ERROR; LEAVE } break; case LENS: NEEDBITS(32) if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) { s->mode = BADB; z->msg = (char*)"invalid stored block lengths"; r = Z_DATA_ERROR; LEAVE } s->sub.left = (uInt)b & 0xffff; b = k = 0; /* dump bits */ Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); break; case STORED: if (n == 0) LEAVE NEEDOUT t = s->sub.left; if (t > n) t = n; if (t > m) t = m; zmemcpy(q, p, t); p += t; n -= t; q += t; m -= t; if ((s->sub.left -= t) != 0) break; Tracev((stderr, "inflate: stored end, %lu total out\n", z->total_out + (q >= s->read ? q - s->read : (s->end - s->read) + (q - s->window)))); s->mode = s->last ? DRY : TYPE; break; case TABLE: NEEDBITS(14) s->sub.trees.table = t = (uInt)b & 0x3fff; #ifndef PKZIP_BUG_WORKAROUND if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) { s->mode = BADB; z->msg = (char*)"too many length or distance symbols"; r = Z_DATA_ERROR; LEAVE } #endif t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); if (t < 19) t = 19; if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) { r = Z_MEM_ERROR; LEAVE } DUMPBITS(14) s->sub.trees.index = 0; Tracev((stderr, "inflate: table sizes ok\n")); s->mode = BTREE; case BTREE: while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) { NEEDBITS(3) s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; DUMPBITS(3) } while (s->sub.trees.index < 19) s->sub.trees.blens[border[s->sub.trees.index++]] = 0; s->sub.trees.bb = 7; t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, &s->sub.trees.tb, z); if (t != Z_OK) { r = t; if (r == Z_DATA_ERROR) { ZFREE(z, s->sub.trees.blens); s->mode = BADB; } LEAVE } s->sub.trees.index = 0; Tracev((stderr, "inflate: bits tree ok\n")); s->mode = DTREE; case DTREE: while (t = s->sub.trees.table, s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) { inflate_huft *h; uInt i, j, c; t = s->sub.trees.bb; NEEDBITS(t) h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); t = h->word.what.Bits; c = h->more.Base; if (c < 16) { DUMPBITS(t) s->sub.trees.blens[s->sub.trees.index++] = c; } else /* c == 16..18 */ { i = c == 18 ? 7 : c - 14; j = c == 18 ? 11 : 3; NEEDBITS(t + i) DUMPBITS(t) j += (uInt)b & inflate_mask[i]; DUMPBITS(i) i = s->sub.trees.index; t = s->sub.trees.table; if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || (c == 16 && i < 1)) { inflate_trees_free(s->sub.trees.tb, z); ZFREE(z, s->sub.trees.blens); s->mode = BADB; z->msg = (char*)"invalid bit length repeat"; r = Z_DATA_ERROR; LEAVE } c = c == 16 ? s->sub.trees.blens[i - 1] : 0; do { s->sub.trees.blens[i++] = c; } while (--j); s->sub.trees.index = i; } } inflate_trees_free(s->sub.trees.tb, z); s->sub.trees.tb = Z_NULL; { uInt bl, bd; inflate_huft *tl, *td; inflate_codes_statef *c; bl = 9; /* must be <= 9 for lookahead assumptions */ bd = 6; /* must be <= 9 for lookahead assumptions */ t = s->sub.trees.table; #ifdef DEBUG_ZLIB inflate_hufts = 0; #endif t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), s->sub.trees.blens, &bl, &bd, &tl, &td, z); if (t != Z_OK) { if (t == (uInt)Z_DATA_ERROR) { ZFREE(z, s->sub.trees.blens); s->mode = BADB; } r = t; LEAVE } Tracev((stderr, "inflate: trees ok, %d * %d bytes used\n", inflate_hufts, sizeof(inflate_huft))); if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) { inflate_trees_free(td, z); inflate_trees_free(tl, z); r = Z_MEM_ERROR; LEAVE } /* * this ZFREE must occur *BEFORE* we mess with sub.decode, because * sub.trees is union'd with sub.decode. */ ZFREE(z, s->sub.trees.blens); s->sub.decode.codes = c; s->sub.decode.tl = tl; s->sub.decode.td = td; } s->mode = CODES; case CODES: UPDATE if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) return inflate_flush(s, z, r); r = Z_OK; inflate_codes_free(s->sub.decode.codes, z); inflate_trees_free(s->sub.decode.td, z); inflate_trees_free(s->sub.decode.tl, z); LOAD Tracev((stderr, "inflate: codes end, %lu total out\n", z->total_out + (q >= s->read ? q - s->read : (s->end - s->read) + (q - s->window)))); if (!s->last) { s->mode = TYPE; break; } if (k > 7) /* return unused byte, if any */ { Assert(k < 16, "inflate_codes grabbed too many bytes") k -= 8; n++; p--; /* can always return one */ } s->mode = DRY; case DRY: FLUSH if (s->read != s->write) LEAVE s->mode = DONEB; case DONEB: r = Z_STREAM_END; LEAVE case BADB: r = Z_DATA_ERROR; LEAVE default: r = Z_STREAM_ERROR; LEAVE } } int inflate_blocks_free(s, z, c) inflate_blocks_statef *s; z_streamp z; uLongf *c; { inflate_blocks_reset(s, z, c); ZFREE(z, s->window); ZFREE(z, s); Trace((stderr, "inflate: blocks freed\n")); return Z_OK; } void inflate_set_dictionary(s, d, n) inflate_blocks_statef *s; const Bytef *d; uInt n; { zmemcpy((charf *)s->window, d, n); s->read = s->write = s->window + n; } /* * This subroutine adds the data at next_in/avail_in to the output history * without performing any output. The output buffer must be "caught up"; * i.e. no pending output (hence s->read equals s->write), and the state must * be BLOCKS (i.e. we should be willing to see the start of a series of * BLOCKS). On exit, the output will also be caught up, and the checksum * will have been updated if need be. */ int inflate_addhistory(s, z) inflate_blocks_statef *s; z_stream *z; { uLong b; /* bit buffer */ /* NOT USED HERE */ uInt k; /* bits in bit buffer */ /* NOT USED HERE */ uInt t; /* temporary storage */ Bytef *p; /* input data pointer */ uInt n; /* bytes available there */ Bytef *q; /* output window write pointer */ uInt m; /* bytes to end of window or read pointer */ if (s->read != s->write) return Z_STREAM_ERROR; if (s->mode != TYPE) return Z_DATA_ERROR; /* we're ready to rock */ LOAD /* while there is input ready, copy to output buffer, moving * pointers as needed. */ while (n) { t = n; /* how many to do */ /* is there room until end of buffer? */ if (t > m) t = m; /* update check information */ if (s->checkfn != Z_NULL) s->check = (*s->checkfn)(s->check, q, t); zmemcpy(q, p, t); q += t; p += t; n -= t; z->total_out += t; s->read = q; /* drag read pointer forward */ /* WWRAP */ /* expand WWRAP macro by hand to handle s->read */ if (q == s->end) { s->read = q = s->window; m = WAVAIL; } } UPDATE return Z_OK; } /* * At the end of a Deflate-compressed PPP packet, we expect to have seen * a `stored' block type value but not the (zero) length bytes. */ int inflate_packet_flush(s) inflate_blocks_statef *s; { if (s->mode != LENS) return Z_DATA_ERROR; s->mode = TYPE; return Z_OK; } /* --- infblock.c */ /* +++ inftrees.c */ /* inftrees.c -- generate Huffman trees for efficient decoding * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* #include "zutil.h" */ /* #include "inftrees.h" */ -char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot include such an acknowledgment, I would appreciate that you keep this copyright string in the executable of your product. */ #ifndef NO_DUMMY_DECL struct internal_state {int dummy;}; /* for buggy compilers */ #endif /* simplify the use of the inflate_huft type with some defines */ #define base more.Base #define next more.Next #define exop word.what.Exop #define bits word.what.Bits local int huft_build OF(( uIntf *, /* code lengths in bits */ uInt, /* number of codes */ uInt, /* number of "simple" codes */ const uIntf *, /* list of base values for non-simple codes */ const uIntf *, /* list of extra bits for non-simple codes */ inflate_huft * FAR*,/* result: starting table */ uIntf *, /* maximum lookup bits (returns actual) */ z_streamp )); /* for zalloc function */ local voidpf falloc OF(( voidpf, /* opaque pointer (not used) */ uInt, /* number of items */ uInt)); /* size of item */ /* Tables for deflate from PKZIP's appnote.txt. */ local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; /* see note #13 above about 258 */ local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */ local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, 8193, 12289, 16385, 24577}; local const uInt cpdext[30] = { /* Extra bits for distance codes */ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13}; /* Huffman code decoding is performed using a multi-level table lookup. The fastest way to decode is to simply build a lookup table whose size is determined by the longest code. However, the time it takes to build this table can also be a factor if the data being decoded is not very long. The most common codes are necessarily the shortest codes, so those codes dominate the decoding time, and hence the speed. The idea is you can have a shorter table that decodes the shorter, more probable codes, and then point to subsidiary tables for the longer codes. The time it costs to decode the longer codes is then traded against the time it takes to make longer tables. This results of this trade are in the variables lbits and dbits below. lbits is the number of bits the first level table for literal/ length codes can decode in one step, and dbits is the same thing for the distance codes. Subsequent tables are also less than or equal to those sizes. These values may be adjusted either when all of the codes are shorter than that, in which case the longest code length in bits is used, or when the shortest code is *longer* than the requested table size, in which case the length of the shortest code in bits is used. There are two different values for the two tables, since they code a different number of possibilities each. The literal/length table codes 286 possible values, or in a flat code, a little over eight bits. The distance table codes 30 possible values, or a little less than five bits, flat. The optimum values for speed end up being about one bit more than those, so lbits is 8+1 and dbits is 5+1. The optimum values may differ though from machine to machine, and possibly even between compilers. Your mileage may vary. */ /* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ #define BMAX 15 /* maximum bit length of any code */ #define N_MAX 288 /* maximum number of codes in any set */ #ifdef DEBUG_ZLIB uInt inflate_hufts; #endif local int huft_build(b, n, s, d, e, t, m, zs) uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ uInt n; /* number of codes (assumed <= N_MAX) */ uInt s; /* number of simple-valued codes (0..s-1) */ const uIntf *d; /* list of base values for non-simple codes */ const uIntf *e; /* list of extra bits for non-simple codes */ inflate_huft * FAR *t; /* result: starting table */ uIntf *m; /* maximum lookup bits, returns actual */ z_streamp zs; /* for zalloc function */ /* Given a list of code lengths and a maximum table size, make a set of tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR if the given code set is incomplete (the tables are still built in this case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */ { uInt a; /* counter for codes of length k */ uInt c[BMAX+1]; /* bit length count table */ uInt f; /* i repeats in table every f entries */ int g; /* maximum code length */ int h; /* table level */ uInt i; /* counter, current code */ uInt j; /* counter */ int k; /* number of bits in current code */ int l; /* bits per table (returned in m) */ uIntf *p; /* pointer into c[], b[], or v[] */ inflate_huft *q; /* points to current table */ struct inflate_huft_s r; /* table entry for structure assignment */ inflate_huft *u[BMAX]; /* table stack */ uInt v[N_MAX]; /* values in order of bit length */ int w; /* bits before this table == (l * h) */ uInt x[BMAX+1]; /* bit offsets, then code stack */ uIntf *xp; /* pointer into x */ int y; /* number of dummy codes added */ uInt z; /* number of entries in current table */ /* Generate counts for each bit length */ p = c; #define C0 *p++ = 0; #define C2 C0 C0 C0 C0 #define C4 C2 C2 C2 C2 C4 /* clear c[]--assume BMAX+1 is 16 */ p = b; i = n; do { c[*p++]++; /* assume all entries <= BMAX */ } while (--i); if (c[0] == n) /* null input--all zero length codes */ { *t = (inflate_huft *)Z_NULL; *m = 0; return Z_OK; } /* Find minimum and maximum length, bound *m by those */ l = *m; for (j = 1; j <= BMAX; j++) if (c[j]) break; k = j; /* minimum code length */ if ((uInt)l < j) l = j; for (i = BMAX; i; i--) if (c[i]) break; g = i; /* maximum code length */ if ((uInt)l > i) l = i; *m = l; /* Adjust last length count to fill out codes, if needed */ for (y = 1 << j; j < i; j++, y <<= 1) if ((y -= c[j]) < 0) return Z_DATA_ERROR; if ((y -= c[i]) < 0) return Z_DATA_ERROR; c[i] += y; /* Generate starting offsets into the value table for each length */ x[1] = j = 0; p = c + 1; xp = x + 2; while (--i) { /* note that i == g from above */ *xp++ = (j += *p++); } /* Make a table of values in order of bit lengths */ p = b; i = 0; do { if ((j = *p++) != 0) v[x[j]++] = i; } while (++i < n); n = x[g]; /* set n to length of v */ /* Generate the Huffman codes and for each, make the table entries */ x[0] = i = 0; /* first Huffman code is zero */ p = v; /* grab values in bit order */ h = -1; /* no tables yet--level -1 */ w = -l; /* bits decoded == (l * h) */ u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ q = (inflate_huft *)Z_NULL; /* ditto */ z = 0; /* ditto */ /* go through the bit lengths (k already is bits in shortest code) */ for (; k <= g; k++) { a = c[k]; while (a--) { /* here i is the Huffman code of length k bits for value *p */ /* make tables up to required level */ while (k > w + l) { h++; w += l; /* previous table always l bits */ /* compute minimum size table less than or equal to l bits */ z = g - w; z = z > (uInt)l ? l : z; /* table size upper limit */ if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ { /* too few codes for k-w bit table */ f -= a + 1; /* deduct codes from patterns left */ xp = c + k; if (j < z) while (++j < z) /* try smaller tables up to z bits */ { if ((f <<= 1) <= *++xp) break; /* enough codes to use up j bits */ f -= *xp; /* else deduct codes from patterns */ } } z = 1 << j; /* table entries for j-bit table */ /* allocate and link in new table */ if ((q = (inflate_huft *)ZALLOC (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) { if (h) inflate_trees_free(u[0], zs); return Z_MEM_ERROR; /* not enough memory */ } #ifdef DEBUG_ZLIB inflate_hufts += z + 1; #endif *t = q + 1; /* link to list for huft_free() */ *(t = &(q->next)) = Z_NULL; u[h] = ++q; /* table starts after link */ /* connect to last table, if there is one */ if (h) { x[h] = i; /* save pattern for backing up */ r.bits = (Byte)l; /* bits to dump before this table */ r.exop = (Byte)j; /* bits in this table */ r.next = q; /* pointer to this table */ j = i >> (w - l); /* (get around Turbo C bug) */ u[h-1][j] = r; /* connect to last table */ } } /* set up table entry in r */ r.bits = (Byte)(k - w); if (p >= v + n) r.exop = 128 + 64; /* out of values--invalid code */ else if (*p < s) { r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ r.base = *p++; /* simple code is just the value */ } else { r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */ r.base = d[*p++ - s]; } /* fill code-like entries with r */ f = 1 << (k - w); for (j = i >> w; j < z; j += f) q[j] = r; /* backwards increment the k-bit code i */ for (j = 1 << (k - 1); i & j; j >>= 1) i ^= j; i ^= j; /* backup over finished tables */ while ((i & ((1 << w) - 1)) != x[h]) { h--; /* don't need to update q */ w -= l; } } } /* Return Z_BUF_ERROR if we were given an incomplete table */ return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; } int inflate_trees_bits(c, bb, tb, z) uIntf *c; /* 19 code lengths */ uIntf *bb; /* bits tree desired/actual depth */ inflate_huft * FAR *tb; /* bits tree result */ z_streamp z; /* for zfree function */ { int r; r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); if (r == Z_DATA_ERROR) z->msg = (char*)"oversubscribed dynamic bit lengths tree"; else if (r == Z_BUF_ERROR || *bb == 0) { inflate_trees_free(*tb, z); z->msg = (char*)"incomplete dynamic bit lengths tree"; r = Z_DATA_ERROR; } return r; } int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z) uInt nl; /* number of literal/length codes */ uInt nd; /* number of distance codes */ uIntf *c; /* that many (total) code lengths */ uIntf *bl; /* literal desired/actual bit depth */ uIntf *bd; /* distance desired/actual bit depth */ inflate_huft * FAR *tl; /* literal/length tree result */ inflate_huft * FAR *td; /* distance tree result */ z_streamp z; /* for zfree function */ { int r; /* build literal/length tree */ r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z); if (r != Z_OK || *bl == 0) { if (r == Z_DATA_ERROR) z->msg = (char*)"oversubscribed literal/length tree"; else if (r != Z_MEM_ERROR) { inflate_trees_free(*tl, z); z->msg = (char*)"incomplete literal/length tree"; r = Z_DATA_ERROR; } return r; } /* build distance tree */ r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z); if (r != Z_OK || (*bd == 0 && nl > 257)) { if (r == Z_DATA_ERROR) z->msg = (char*)"oversubscribed distance tree"; else if (r == Z_BUF_ERROR) { #ifdef PKZIP_BUG_WORKAROUND r = Z_OK; } #else inflate_trees_free(*td, z); z->msg = (char*)"incomplete distance tree"; r = Z_DATA_ERROR; } else if (r != Z_MEM_ERROR) { z->msg = (char*)"empty distance tree with lengths"; r = Z_DATA_ERROR; } inflate_trees_free(*tl, z); return r; #endif } /* done */ return Z_OK; } /* build fixed tables only once--keep them here */ local int fixed_built = 0; #define FIXEDH 530 /* number of hufts used by fixed tables */ local inflate_huft fixed_mem[FIXEDH]; local uInt fixed_bl; local uInt fixed_bd; local inflate_huft *fixed_tl; local inflate_huft *fixed_td; local voidpf falloc(q, n, s) voidpf q; /* opaque pointer */ uInt n; /* number of items */ uInt s; /* size of item */ { Assert(s == sizeof(inflate_huft) && n <= *(intf *)q, "inflate_trees falloc overflow"); *(intf *)q -= n+s-s; /* s-s to avoid warning */ return (voidpf)(fixed_mem + *(intf *)q); } int inflate_trees_fixed(bl, bd, tl, td) uIntf *bl; /* literal desired/actual bit depth */ uIntf *bd; /* distance desired/actual bit depth */ inflate_huft * FAR *tl; /* literal/length tree result */ inflate_huft * FAR *td; /* distance tree result */ { /* build fixed tables if not already (multiple overlapped executions ok) */ if (!fixed_built) { int k; /* temporary variable */ unsigned c[288]; /* length list for huft_build */ z_stream z; /* for falloc function */ int f = FIXEDH; /* number of hufts left in fixed_mem */ /* set up fake z_stream for memory routines */ z.zalloc = falloc; z.zfree = Z_NULL; z.opaque = (voidpf)&f; /* literal table */ for (k = 0; k < 144; k++) c[k] = 8; for (; k < 256; k++) c[k] = 9; for (; k < 280; k++) c[k] = 7; for (; k < 288; k++) c[k] = 8; fixed_bl = 7; huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); /* distance table */ for (k = 0; k < 30; k++) c[k] = 5; fixed_bd = 5; huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); /* done */ Assert(f == 0, "invalid build of fixed tables"); fixed_built = 1; } *bl = fixed_bl; *bd = fixed_bd; *tl = fixed_tl; *td = fixed_td; return Z_OK; } int inflate_trees_free(t, z) inflate_huft *t; /* table to free */ z_streamp z; /* for zfree function */ /* Free the malloc'ed tables built by huft_build(), which makes a linked list of the tables it made, with the links in a dummy first entry of each table. */ { inflate_huft *p, *q, *r; /* Reverse linked list */ p = Z_NULL; q = t; while (q != Z_NULL) { r = (q - 1)->next; (q - 1)->next = p; p = q; q = r; } /* Go through linked list, freeing from the malloced (t[-1]) address. */ while (p != Z_NULL) { q = (--p)->next; ZFREE(z,p); p = q; } return Z_OK; } /* --- inftrees.c */ /* +++ infcodes.c */ /* infcodes.c -- process literals and length/distance pairs * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* #include "zutil.h" */ /* #include "inftrees.h" */ /* #include "infblock.h" */ /* #include "infcodes.h" */ /* #include "infutil.h" */ /* +++ inffast.h */ /* inffast.h -- header to use inffast.c * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* WARNING: this file should *not* be used by applications. It is part of the implementation of the compression library and is subject to change. Applications should only use zlib.h. */ extern int inflate_fast OF(( uInt, uInt, inflate_huft *, inflate_huft *, inflate_blocks_statef *, z_streamp )); /* --- inffast.h */ /* simplify the use of the inflate_huft type with some defines */ #define base more.Base #define next more.Next #define exop word.what.Exop #define bits word.what.Bits /* inflate codes private state */ struct inflate_codes_state { /* mode */ enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ START, /* x: set up for LEN */ LEN, /* i: get length/literal/eob next */ LENEXT, /* i: getting length extra (have base) */ DIST, /* i: get distance next */ DISTEXT, /* i: getting distance extra */ COPY, /* o: copying bytes in window, waiting for space */ LIT, /* o: got literal, waiting for output space */ WASH, /* o: got eob, possibly still output waiting */ END, /* x: got eob and all data flushed */ BADCODE} /* x: got error */ mode; /* current inflate_codes mode */ /* mode dependent information */ uInt len; union { struct { inflate_huft *tree; /* pointer into tree */ uInt need; /* bits needed */ } code; /* if LEN or DIST, where in tree */ uInt lit; /* if LIT, literal */ struct { uInt get; /* bits to get for extra */ uInt dist; /* distance back to copy from */ } copy; /* if EXT or COPY, where and how much */ } sub; /* submode */ /* mode independent information */ Byte lbits; /* ltree bits decoded per branch */ Byte dbits; /* dtree bits decoder per branch */ inflate_huft *ltree; /* literal/length/eob tree */ inflate_huft *dtree; /* distance tree */ }; inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) uInt bl, bd; inflate_huft *tl; inflate_huft *td; /* need separate declaration for Borland C++ */ z_streamp z; { inflate_codes_statef *c; if ((c = (inflate_codes_statef *) ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) { c->mode = START; c->lbits = (Byte)bl; c->dbits = (Byte)bd; c->ltree = tl; c->dtree = td; Tracev((stderr, "inflate: codes new\n")); } return c; } int inflate_codes(s, z, r) inflate_blocks_statef *s; z_streamp z; int r; { uInt j; /* temporary storage */ inflate_huft *t; /* temporary pointer */ uInt e; /* extra bits or operation */ uLong b; /* bit buffer */ uInt k; /* bits in bit buffer */ Bytef *p; /* input data pointer */ uInt n; /* bytes available there */ Bytef *q; /* output window write pointer */ uInt m; /* bytes to end of window or read pointer */ Bytef *f; /* pointer to copy strings from */ inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ /* copy input/output information to locals (UPDATE macro restores) */ LOAD /* process input and output based on current state */ while (1) switch (c->mode) { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ case START: /* x: set up for LEN */ #ifndef SLOW if (m >= 258 && n >= 10) { UPDATE r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); LOAD if (r != Z_OK) { c->mode = r == Z_STREAM_END ? WASH : BADCODE; break; } } #endif /* !SLOW */ c->sub.code.need = c->lbits; c->sub.code.tree = c->ltree; c->mode = LEN; case LEN: /* i: get length/literal/eob next */ j = c->sub.code.need; NEEDBITS(j) t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); DUMPBITS(t->bits) e = (uInt)(t->exop); if (e == 0) /* literal */ { c->sub.lit = t->base; Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? "inflate: literal '%c'\n" : "inflate: literal 0x%02x\n", t->base)); c->mode = LIT; break; } if (e & 16) /* length */ { c->sub.copy.get = e & 15; c->len = t->base; c->mode = LENEXT; break; } if ((e & 64) == 0) /* next table */ { c->sub.code.need = e; c->sub.code.tree = t->next; break; } if (e & 32) /* end of block */ { Tracevv((stderr, "inflate: end of block\n")); c->mode = WASH; break; } c->mode = BADCODE; /* invalid code */ z->msg = (char*)"invalid literal/length code"; r = Z_DATA_ERROR; LEAVE case LENEXT: /* i: getting length extra (have base) */ j = c->sub.copy.get; NEEDBITS(j) c->len += (uInt)b & inflate_mask[j]; DUMPBITS(j) c->sub.code.need = c->dbits; c->sub.code.tree = c->dtree; Tracevv((stderr, "inflate: length %u\n", c->len)); c->mode = DIST; case DIST: /* i: get distance next */ j = c->sub.code.need; NEEDBITS(j) t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); DUMPBITS(t->bits) e = (uInt)(t->exop); if (e & 16) /* distance */ { c->sub.copy.get = e & 15; c->sub.copy.dist = t->base; c->mode = DISTEXT; break; } if ((e & 64) == 0) /* next table */ { c->sub.code.need = e; c->sub.code.tree = t->next; break; } c->mode = BADCODE; /* invalid code */ z->msg = (char*)"invalid distance code"; r = Z_DATA_ERROR; LEAVE case DISTEXT: /* i: getting distance extra */ j = c->sub.copy.get; NEEDBITS(j) c->sub.copy.dist += (uInt)b & inflate_mask[j]; DUMPBITS(j) Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); c->mode = COPY; case COPY: /* o: copying bytes in window, waiting for space */ #ifndef __TURBOC__ /* Turbo C bug for following expression */ f = (uInt)(q - s->window) < c->sub.copy.dist ? s->end - (c->sub.copy.dist - (q - s->window)) : q - c->sub.copy.dist; #else f = q - c->sub.copy.dist; if ((uInt)(q - s->window) < c->sub.copy.dist) f = s->end - (c->sub.copy.dist - (uInt)(q - s->window)); #endif while (c->len) { NEEDOUT OUTBYTE(*f++) if (f == s->end) f = s->window; c->len--; } c->mode = START; break; case LIT: /* o: got literal, waiting for output space */ NEEDOUT OUTBYTE(c->sub.lit) c->mode = START; break; case WASH: /* o: got eob, possibly more output */ FLUSH if (s->read != s->write) LEAVE c->mode = END; case END: r = Z_STREAM_END; LEAVE case BADCODE: /* x: got error */ r = Z_DATA_ERROR; LEAVE default: r = Z_STREAM_ERROR; LEAVE } } void inflate_codes_free(c, z) inflate_codes_statef *c; z_streamp z; { ZFREE(z, c); Tracev((stderr, "inflate: codes free\n")); } /* --- infcodes.c */ /* +++ infutil.c */ /* inflate_util.c -- data and routines common to blocks and codes * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* #include "zutil.h" */ /* #include "infblock.h" */ /* #include "inftrees.h" */ /* #include "infcodes.h" */ /* #include "infutil.h" */ #ifndef NO_DUMMY_DECL struct inflate_codes_state {int dummy;}; /* for buggy compilers */ #endif /* And'ing with mask[n] masks the lower n bits */ uInt inflate_mask[17] = { 0x0000, 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff }; /* copy as much as possible from the sliding window to the output area */ int inflate_flush(s, z, r) inflate_blocks_statef *s; z_streamp z; int r; { uInt n; Bytef *p; Bytef *q; /* local copies of source and destination pointers */ p = z->next_out; q = s->read; /* compute number of bytes to copy as far as end of window */ n = (uInt)((q <= s->write ? s->write : s->end) - q); if (n > z->avail_out) n = z->avail_out; if (n && r == Z_BUF_ERROR) r = Z_OK; /* update counters */ z->avail_out -= n; z->total_out += n; /* update check information */ if (s->checkfn != Z_NULL) z->adler = s->check = (*s->checkfn)(s->check, q, n); /* copy as far as end of window */ if (p != Z_NULL) { zmemcpy(p, q, n); p += n; } q += n; /* see if more to copy at beginning of window */ if (q == s->end) { /* wrap pointers */ q = s->window; if (s->write == s->end) s->write = s->window; /* compute bytes to copy */ n = (uInt)(s->write - q); if (n > z->avail_out) n = z->avail_out; if (n && r == Z_BUF_ERROR) r = Z_OK; /* update counters */ z->avail_out -= n; z->total_out += n; /* update check information */ if (s->checkfn != Z_NULL) z->adler = s->check = (*s->checkfn)(s->check, q, n); /* copy */ if (p != Z_NULL) { zmemcpy(p, q, n); p += n; } q += n; } /* update pointers */ z->next_out = p; s->read = q; /* done */ return r; } /* --- infutil.c */ /* +++ inffast.c */ /* inffast.c -- process literals and length/distance pairs fast * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* #include "zutil.h" */ /* #include "inftrees.h" */ /* #include "infblock.h" */ /* #include "infcodes.h" */ /* #include "infutil.h" */ /* #include "inffast.h" */ #ifndef NO_DUMMY_DECL struct inflate_codes_state {int dummy;}; /* for buggy compilers */ #endif /* simplify the use of the inflate_huft type with some defines */ #define base more.Base #define next more.Next #define exop word.what.Exop #define bits word.what.Bits /* macros for bit input with no checking and for returning unused bytes */ #define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<>3);p-=c;k&=7;} /* Called with number of bytes left to write in window at least 258 (the maximum string length) and number of input bytes available at least ten. The ten bytes are six bytes for the longest length/ distance pair plus four bytes for overloading the bit buffer. */ int inflate_fast(bl, bd, tl, td, s, z) uInt bl, bd; inflate_huft *tl; inflate_huft *td; /* need separate declaration for Borland C++ */ inflate_blocks_statef *s; z_streamp z; { inflate_huft *t; /* temporary pointer */ uInt e; /* extra bits or operation */ uLong b; /* bit buffer */ uInt k; /* bits in bit buffer */ Bytef *p; /* input data pointer */ uInt n; /* bytes available there */ Bytef *q; /* output window write pointer */ uInt m; /* bytes to end of window or read pointer */ uInt ml; /* mask for literal/length tree */ uInt md; /* mask for distance tree */ uInt c; /* bytes to copy */ uInt d; /* distance back to copy from */ Bytef *r; /* copy source pointer */ /* load input, output, bit values */ LOAD /* initialize masks */ ml = inflate_mask[bl]; md = inflate_mask[bd]; /* do until not enough input or output space for fast loop */ do { /* assume called with m >= 258 && n >= 10 */ /* get literal/length code */ GRABBITS(20) /* max bits for literal/length code */ if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) { DUMPBITS(t->bits) Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? "inflate: * literal '%c'\n" : "inflate: * literal 0x%02x\n", t->base)); *q++ = (Byte)t->base; m--; continue; } do { DUMPBITS(t->bits) if (e & 16) { /* get extra bits for length */ e &= 15; c = t->base + ((uInt)b & inflate_mask[e]); DUMPBITS(e) Tracevv((stderr, "inflate: * length %u\n", c)); /* decode distance base of block to copy */ GRABBITS(15); /* max bits for distance code */ e = (t = td + ((uInt)b & md))->exop; do { DUMPBITS(t->bits) if (e & 16) { /* get extra bits to add to distance base */ e &= 15; GRABBITS(e) /* get extra bits (up to 13) */ d = t->base + ((uInt)b & inflate_mask[e]); DUMPBITS(e) Tracevv((stderr, "inflate: * distance %u\n", d)); /* do the copy */ m -= c; if ((uInt)(q - s->window) >= d) /* offset before dest */ { /* just copy */ r = q - d; *q++ = *r++; c--; /* minimum count is three, */ *q++ = *r++; c--; /* so unroll loop a little */ } else /* else offset after destination */ { e = d - (uInt)(q - s->window); /* bytes from offset to end */ r = s->end - e; /* pointer to offset */ if (c > e) /* if source crosses, */ { c -= e; /* copy to end of window */ do { *q++ = *r++; } while (--e); r = s->window; /* copy rest from start of window */ } } do { /* copy all or what's left */ *q++ = *r++; } while (--c); break; } else if ((e & 64) == 0) e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; else { z->msg = (char*)"invalid distance code"; UNGRAB UPDATE return Z_DATA_ERROR; } } while (1); break; } if ((e & 64) == 0) { if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) { DUMPBITS(t->bits) Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? "inflate: * literal '%c'\n" : "inflate: * literal 0x%02x\n", t->base)); *q++ = (Byte)t->base; m--; break; } } else if (e & 32) { Tracevv((stderr, "inflate: * end of block\n")); UNGRAB UPDATE return Z_STREAM_END; } else { z->msg = (char*)"invalid literal/length code"; UNGRAB UPDATE return Z_DATA_ERROR; } } while (1); } while (m >= 258 && n >= 10); /* not enough input or output--restore pointers and return */ UNGRAB UPDATE return Z_OK; } /* --- inffast.c */ /* +++ zutil.c */ /* zutil.c -- target dependent utility functions for the compression library * Copyright (C) 1995-1996 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ /* From: zutil.c,v 1.17 1996/07/24 13:41:12 me Exp $ */ #ifdef DEBUG_ZLIB #include #endif /* #include "zutil.h" */ #ifndef NO_DUMMY_DECL struct internal_state {int dummy;}; /* for buggy compilers */ #endif #ifndef STDC extern void exit OF((int)); #endif static const char *z_errmsg[10] = { "need dictionary", /* Z_NEED_DICT 2 */ "stream end", /* Z_STREAM_END 1 */ "", /* Z_OK 0 */ "file error", /* Z_ERRNO (-1) */ "stream error", /* Z_STREAM_ERROR (-2) */ "data error", /* Z_DATA_ERROR (-3) */ "insufficient memory", /* Z_MEM_ERROR (-4) */ "buffer error", /* Z_BUF_ERROR (-5) */ "incompatible version",/* Z_VERSION_ERROR (-6) */ ""}; const char *zlibVersion() { return ZLIB_VERSION; } #ifdef DEBUG_ZLIB void z_error (m) char *m; { fprintf(stderr, "%s\n", m); exit(1); } #endif #ifndef HAVE_MEMCPY void zmemcpy(dest, source, len) Bytef* dest; Bytef* source; uInt len; { if (len == 0) return; do { *dest++ = *source++; /* ??? to be unrolled */ } while (--len != 0); } int zmemcmp(s1, s2, len) Bytef* s1; Bytef* s2; uInt len; { uInt j; for (j = 0; j < len; j++) { if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; } return 0; } void zmemzero(dest, len) Bytef* dest; uInt len; { if (len == 0) return; do { *dest++ = 0; /* ??? to be unrolled */ } while (--len != 0); } #endif #ifdef __TURBOC__ #if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__) /* Small and medium model in Turbo C are for now limited to near allocation * with reduced MAX_WBITS and MAX_MEM_LEVEL */ # define MY_ZCALLOC /* Turbo C malloc() does not allow dynamic allocation of 64K bytes * and farmalloc(64K) returns a pointer with an offset of 8, so we * must fix the pointer. Warning: the pointer must be put back to its * original form in order to free it, use zcfree(). */ #define MAX_PTR 10 /* 10*64K = 640K */ local int next_ptr = 0; typedef struct ptr_table_s { voidpf org_ptr; voidpf new_ptr; } ptr_table; local ptr_table table[MAX_PTR]; /* This table is used to remember the original form of pointers * to large buffers (64K). Such pointers are normalized with a zero offset. * Since MSDOS is not a preemptive multitasking OS, this table is not * protected from concurrent access. This hack doesn't work anyway on * a protected system like OS/2. Use Microsoft C instead. */ voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) { voidpf buf = opaque; /* just to make some compilers happy */ ulg bsize = (ulg)items*size; /* If we allocate less than 65520 bytes, we assume that farmalloc * will return a usable pointer which doesn't have to be normalized. */ if (bsize < 65520L) { buf = farmalloc(bsize); if (*(ush*)&buf != 0) return buf; } else { buf = farmalloc(bsize + 16L); } if (buf == NULL || next_ptr >= MAX_PTR) return NULL; table[next_ptr].org_ptr = buf; /* Normalize the pointer to seg:0 */ *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; *(ush*)&buf = 0; table[next_ptr++].new_ptr = buf; return buf; } void zcfree (voidpf opaque, voidpf ptr) { int n; if (*(ush*)&ptr != 0) { /* object < 64K */ farfree(ptr); return; } /* Find the original pointer */ for (n = 0; n < next_ptr; n++) { if (ptr != table[n].new_ptr) continue; farfree(table[n].org_ptr); while (++n < next_ptr) { table[n-1] = table[n]; } next_ptr--; return; } ptr = opaque; /* just to make some compilers happy */ Assert(0, "zcfree: ptr not found"); } #endif #endif /* __TURBOC__ */ #if defined(M_I86) && !defined(__32BIT__) /* Microsoft C in 16-bit mode */ # define MY_ZCALLOC #if (!defined(_MSC_VER) || (_MSC_VER < 600)) # define _halloc halloc # define _hfree hfree #endif voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) { if (opaque) opaque = 0; /* to make compiler happy */ return _halloc((long)items, size); } void zcfree (voidpf opaque, voidpf ptr) { if (opaque) opaque = 0; /* to make compiler happy */ _hfree(ptr); } #endif /* MSC */ #ifndef MY_ZCALLOC /* Any system without a special alloc function */ #ifndef STDC extern voidp calloc OF((uInt items, uInt size)); extern void free OF((voidpf ptr)); #endif voidpf zcalloc (opaque, items, size) voidpf opaque; unsigned items; unsigned size; { if (opaque) items += size - size; /* make compiler happy */ return (voidpf)calloc(items, size); } void zcfree (opaque, ptr) voidpf opaque; voidpf ptr; { free(ptr); if (opaque) return; /* make compiler happy */ } #endif /* MY_ZCALLOC */ /* --- zutil.c */ /* +++ adler32.c */ /* adler32.c -- compute the Adler-32 checksum of a data stream * Copyright (C) 1995-1996 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ /* From: adler32.c,v 1.10 1996/05/22 11:52:18 me Exp $ */ /* #include "zlib.h" */ #define BASE 65521L /* largest prime smaller than 65536 */ #define NMAX 5552 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ #define DO1(buf,i) {s1 += buf[(i)]; s2 += s1;} #define DO2(buf,i) DO1(buf,i); DO1(buf,(i)+1); #define DO4(buf,i) DO2(buf,i); DO2(buf,(i)+2); #define DO8(buf,i) DO4(buf,i); DO4(buf,(i)+4); #define DO16(buf) DO8(buf,0); DO8(buf,8); /* ========================================================================= */ uLong adler32(adler, buf, len) uLong adler; const Bytef *buf; uInt len; { unsigned long s1 = adler & 0xffff; unsigned long s2 = (adler >> 16) & 0xffff; int k; if (buf == Z_NULL) return 1L; while (len > 0) { k = len < NMAX ? len : NMAX; len -= k; while (k >= 16) { DO16(buf); buf += 16; k -= 16; } if (k != 0) do { s1 += *buf++; s2 += s1; } while (--k); s1 %= BASE; s2 %= BASE; } return (s2 << 16) | s1; } /* --- adler32.c */ - -#ifdef _KERNEL -static int -zlib_modevent(module_t mod, int type, void *unused) -{ - switch (type) { - case MOD_LOAD: - return 0; - case MOD_UNLOAD: - return 0; - } - return EINVAL; -} - -static moduledata_t zlib_mod = { - "zlib", - zlib_modevent, - 0 -}; -DECLARE_MODULE(zlib, zlib_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); -MODULE_VERSION(zlib, 1); -#endif /* _KERNEL */ Index: head/sys/modules/crypto/Makefile =================================================================== --- head/sys/modules/crypto/Makefile (revision 350495) +++ head/sys/modules/crypto/Makefile (revision 350496) @@ -1,74 +1,75 @@ # $FreeBSD$ LIBSODIUM=${SRCTOP}/sys/contrib/libsodium/src/libsodium .PATH: ${SRCTOP}/sys/opencrypto .PATH: ${SRCTOP}/sys/crypto .PATH: ${SRCTOP}/sys/crypto/blowfish .PATH: ${SRCTOP}/sys/crypto/camellia .PATH: ${SRCTOP}/sys/crypto/des .PATH: ${SRCTOP}/sys/crypto/rijndael .PATH: ${SRCTOP}/sys/crypto/sha2 .PATH: ${SRCTOP}/sys/crypto/siphash .PATH: ${SRCTOP}/sys/crypto/skein .PATH: ${SRCTOP}/sys/crypto/blake2 .PATH: ${SRCTOP}/sys/crypto/chacha20 .PATH: ${SRCTOP}/sys/contrib/libb2 .PATH: ${LIBSODIUM}/crypto_onetimeauth/poly1305 .PATH: ${LIBSODIUM}/crypto_onetimeauth/poly1305/donna .PATH: ${LIBSODIUM}/crypto_verify/sodium .PATH: ${SRCTOP}/sys/crypto/libsodium KMOD = crypto SRCS = crypto.c cryptodev_if.c SRCS += criov.c cryptosoft.c xform.c SRCS += cast.c cryptodeflate.c rmd160.c rijndael-alg-fst.c rijndael-api.c rijndael-api-fst.c +CFLAGS.cryptodeflate.c += ${ZLIB_CFLAGS} SRCS += skipjack.c bf_enc.c bf_ecb.c bf_skey.c SRCS += camellia.c camellia-api.c SRCS += des_ecb.c des_enc.c des_setkey.c SRCS += sha1.c sha256c.c sha512c.c SRCS += skein.c skein_block.c # unroll the 256 and 512 loops, half unroll the 1024 CFLAGS+= -DSKEIN_LOOP=995 .if exists(${MACHINE_ARCH}/skein_block_asm.s) .PATH: ${SRCTOP}/sys/crypto/skein/${MACHINE_ARCH} SRCS += skein_block_asm.s CFLAGS += -DSKEIN_ASM -DSKEIN_USE_ASM=1792 # list of block functions to replace with assembly: 256+512+1024 = 1792 ACFLAGS += -DELF -Wa,--noexecstack # Fully unroll all loops in the assembly optimized version AFLAGS+= --defsym SKEIN_LOOP=0 .endif SRCS += siphash.c SRCS += gmac.c gfmult.c SRCS += blake2b-ref.c SRCS += blake2s-ref.c SRCS += blake2-sw.c CFLAGS.blake2b-ref.c += -I${SRCTOP}/sys/crypto/blake2 -DSUFFIX=_ref CFLAGS.blake2s-ref.c += -I${SRCTOP}/sys/crypto/blake2 -DSUFFIX=_ref CFLAGS.blake2-sw.c += -I${SRCTOP}/sys/crypto/blake2 CWARNFLAGS.blake2b-ref.c += -Wno-cast-qual -Wno-unused-function CWARNFLAGS.blake2s-ref.c += -Wno-cast-qual -Wno-unused-function SRCS += chacha.c SRCS += chacha-sw.c LIBSODIUM_INC=${LIBSODIUM}/include LIBSODIUM_COMPAT=${SRCTOP}/sys/crypto/libsodium SRCS += xform_poly1305.c CFLAGS.xform_poly1305.c += -I${LIBSODIUM_INC} -I${LIBSODIUM_COMPAT} SRCS += onetimeauth_poly1305.c CFLAGS.onetimeauth_poly1305.c += -I${LIBSODIUM_INC}/sodium -I${LIBSODIUM_COMPAT} SRCS += poly1305_donna.c CFLAGS.poly1305_donna.c += -I${LIBSODIUM_INC}/sodium -I${LIBSODIUM_COMPAT} SRCS += verify.c CFLAGS.verify.c += -I${LIBSODIUM_INC}/sodium -I${LIBSODIUM_COMPAT} SRCS += randombytes.c CFLAGS.randombytes.c += -I${LIBSODIUM_INC} -I${LIBSODIUM_COMPAT} SRCS += utils.c CFLAGS.utils.c += -I${LIBSODIUM_INC} -I${LIBSODIUM_COMPAT} SRCS += opt_param.h cryptodev_if.h bus_if.h device_if.h SRCS += opt_ddb.h SRCS += cbc_mac.c SRCS += xform_cbc_mac.c .include Index: head/sys/modules/zfs/Makefile =================================================================== --- head/sys/modules/zfs/Makefile (revision 350495) +++ head/sys/modules/zfs/Makefile (revision 350496) @@ -1,124 +1,116 @@ # $FreeBSD$ SYSDIR?=${SRCTOP}/sys KMOD= zfs SRCS= bus_if.h device_if.h vnode_if.h opt_kstack_pages.h SUNW= ${SYSDIR}/cddl/contrib/opensolaris .PATH: ${SUNW}/common/acl SRCS+= acl_common.c .PATH: ${SUNW}/common/avl SRCS+= avl.c .PATH: ${SUNW}/common/nvpair SRCS+= opensolaris_nvpair.c SRCS+= opensolaris_nvpair_alloc_fixed.c SRCS+= opensolaris_fnvpair.c .PATH: ${SYSDIR}/cddl/contrib/opensolaris/common/unicode SRCS+= u8_textprep.c .PATH: ${SYSDIR}/cddl/compat/opensolaris/kern SRCS+= opensolaris_acl.c SRCS+= opensolaris_dtrace.c SRCS+= opensolaris_kobj.c SRCS+= opensolaris_kstat.c SRCS+= opensolaris_lookup.c SRCS+= opensolaris_policy.c SRCS+= opensolaris_string.c SRCS+= opensolaris_sysevent.c SRCS+= opensolaris_taskq.c SRCS+= opensolaris_uio.c SRCS+= opensolaris_vfs.c SRCS+= opensolaris_vm.c SRCS+= opensolaris_zone.c _A=${SYSDIR}/cddl/contrib/opensolaris/common/atomic .if exists(${_A}/${MACHINE_CPUARCH}/opensolaris_atomic.S) .PATH: ${_A}/${MACHINE_CPUARCH} SRCS+= opensolaris_atomic.S .elif exists(${_A}/${MACHINE_ARCH}/opensolaris_atomic.S) .PATH: ${_A}/${MACHINE_ARCH} SRCS+= opensolaris_atomic.S .else SRCS+= opensolaris_atomic.c .endif .PATH: ${SUNW}/uts/common/fs SRCS+= vnode.c .PATH: ${SUNW}/uts/common/os SRCS+= callb.c SRCS+= fm.c SRCS+= list.c SRCS+= nvpair_alloc_system.c .PATH: ${SUNW}/uts/common/zmod -SRCS+= adler32.c -SRCS+= opensolaris_crc32.c -SRCS+= deflate.c -SRCS+= inffast.c -SRCS+= inflate.c -SRCS+= inftrees.c -SRCS+= trees.c SRCS+= zmod.c -SRCS+= zmod_subr.c -SRCS+= zutil.c +CFLAGS.zmod.c+= ${ZLIB_CFLAGS} .PATH: ${SYSDIR}/crypto/sha2 SRCS+= sha256c.c sha512c.c .PATH: ${SYSDIR}/crypto/skein SRCS+= skein.c skein_block.c .PATH: ${SUNW}/common/zfs .include "${SUNW}/uts/common/Makefile.files" .PATH: ${SUNW}/uts/common/fs/zfs ZFS_SRCS= ${ZFS_OBJS:C/.o$/.c/} SRCS+= ${ZFS_SRCS} SRCS+= vdev_geom.c SRCS+= trim_map.c .PATH: ${SUNW}/uts/common/fs/zfs/lua LUA_SRCS= ${LUA_OBJS:C/.o$/.c/} SRCS+= ${LUA_SRCS} # Use FreeBSD's namecache. CFLAGS+=-DFREEBSD_NAMECACHE CFLAGS+=-I${SYSDIR}/cddl/compat/opensolaris CFLAGS+=-I${SUNW}/uts/common/fs/zfs CFLAGS+=-I${SUNW}/uts/common/fs/zfs/lua CFLAGS+=-I${SUNW}/uts/common/zmod CFLAGS+=-I${SUNW}/uts/common CFLAGS+=-I${SYSDIR} CFLAGS+=-I${SUNW}/common/zfs CFLAGS+=-I${SUNW}/common CFLAGS+=-DBUILDING_ZFS CFLAGS.gcc+=-fms-extensions .if ${MACHINE_ARCH} == "powerpc64" CFLAGS.gcc+=-mminimal-toc .endif .ifdef ZFS_DEBUG CFLAGS+=-DDEBUG=1 DEBUG_FLAGS=-g .endif .include CFLAGS+= -include ${SYSDIR}/cddl/compat/opensolaris/sys/debug_compat.h CWARNFLAGS+=-Wno-missing-prototypes CWARNFLAGS+=-Wno-undef CWARNFLAGS+=-Wno-strict-prototypes CWARNFLAGS+=-Wno-cast-qual CWARNFLAGS+=-Wno-parentheses CWARNFLAGS+=-Wno-redundant-decls CWARNFLAGS+=-Wno-missing-braces CWARNFLAGS+=-Wno-uninitialized CWARNFLAGS+=-Wno-unused CWARNFLAGS+=-Wno-inline CWARNFLAGS+=-Wno-switch CWARNFLAGS+=-Wno-pointer-arith Index: head/sys/modules/zlib/Makefile =================================================================== --- head/sys/modules/zlib/Makefile (revision 350495) +++ head/sys/modules/zlib/Makefile (revision 350496) @@ -1,8 +1,28 @@ # $FreeBSD$ .PATH: ${SRCTOP}/sys/libkern +.PATH: ${SRCTOP}/sys/dev/zlib +.PATH: ${SRCTOP}/sys/contrib/zlib KMOD= zlib +# legacy zlib - 1.0.4 SRCS= zlib.c +# newer zlib - 1.2.11 +SRCS+= zcalloc.c +SRCS+= zlib_mod.c +SRCS+= adler32.c +SRCS+= crc32.c +SRCS+= deflate.c +SRCS+= inffast.c +SRCS+= inflate.c +SRCS+= inftrees.c +SRCS+= trees.c +SRCS+= zutil.c + +CFLAGS+=${ZLIB_CFLAGS} + +CWARNFLAGS.compress.c+=-Wno-cast-qual # compress:49 +CWARNFLAGS.deflate.c+=-Wno-cast-qual # deflate.c:415 +CWARNFLAGS.uncompr.c+=-Wno-cast-qual # uncompr:49 .include Index: head/sys/opencrypto/cryptodeflate.c =================================================================== --- head/sys/opencrypto/cryptodeflate.c (revision 350495) +++ head/sys/opencrypto/cryptodeflate.c (revision 350496) @@ -1,246 +1,244 @@ /* $OpenBSD: deflate.c,v 1.3 2001/08/20 02:45:22 hugh Exp $ */ /*- * Copyright (c) 2001 Jean-Jacques Bernard-Gundol (jj@wabbitt.org) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This file contains a wrapper around the deflate algo compression - * functions using the zlib library (see libkern/zlib.c and sys/zlib.h}) + * functions using the zlib library (see sys/contrib/zlib) */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include -#include +#include #include #include SDT_PROVIDER_DECLARE(opencrypto); SDT_PROBE_DEFINE2(opencrypto, deflate, deflate_global, entry, "int", "u_int32_t"); SDT_PROBE_DEFINE6(opencrypto, deflate, deflate_global, bad, "int", "int", "int", "int", "int", "int"); SDT_PROBE_DEFINE6(opencrypto, deflate, deflate_global, iter, "int", "int", "int", "int", "int", "int"); SDT_PROBE_DEFINE2(opencrypto, deflate, deflate_global, return, "int", "u_int32_t"); int window_inflate = -1 * MAX_WBITS; int window_deflate = -12; +static void * +crypto_zalloc(void *nil, u_int type, u_int size) +{ + void *ptr; + + ptr = malloc(type *size, M_CRYPTO_DATA, M_NOWAIT); + return ptr; +} + +static void +crypto_zfree(void *nil, void *ptr) +{ + + free(ptr, M_CRYPTO_DATA); +} + /* * This function takes a block of data and (de)compress it using the deflate * algorithm */ u_int32_t deflate_global(data, size, decomp, out) u_int8_t *data; u_int32_t size; int decomp; u_int8_t **out; { /* decomp indicates whether we compress (0) or decompress (1) */ z_stream zbuf; u_int8_t *output; u_int32_t count, result; int error, i; struct deflate_buf *bufh, *bufp; SDT_PROBE2(opencrypto, deflate, deflate_global, entry, decomp, size); bufh = bufp = NULL; if (!decomp) { i = 1; } else { /* * Choose a buffer with 4x the size of the input buffer * for the size of the output buffer in the case of * decompression. If it's not sufficient, it will need to be * updated while the decompression is going on. */ i = 4; } /* * Make sure we do have enough output space. Repeated calls to * deflate need at least 6 bytes of output buffer space to avoid * repeated markers. We will always provide at least 16 bytes. */ while ((size * i) < 16) i++; bufh = bufp = malloc(sizeof(*bufp) + (size_t)(size * i), M_CRYPTO_DATA, M_NOWAIT); if (bufp == NULL) { SDT_PROBE6(opencrypto, deflate, deflate_global, bad, decomp, 0, __LINE__, 0, 0, 0); goto bad2; } bufp->next = NULL; bufp->size = size * i; bzero(&zbuf, sizeof(z_stream)); - zbuf.zalloc = z_alloc; - zbuf.zfree = z_free; + zbuf.zalloc = crypto_zalloc; + zbuf.zfree = crypto_zfree; zbuf.opaque = Z_NULL; zbuf.next_in = data; /* Data that is going to be processed. */ zbuf.avail_in = size; /* Total length of data to be processed. */ zbuf.next_out = bufp->data; zbuf.avail_out = bufp->size; error = decomp ? inflateInit2(&zbuf, window_inflate) : deflateInit2(&zbuf, Z_DEFAULT_COMPRESSION, Z_METHOD, window_deflate, Z_MEMLEVEL, Z_DEFAULT_STRATEGY); if (error != Z_OK) { SDT_PROBE6(opencrypto, deflate, deflate_global, bad, decomp, error, __LINE__, 0, 0, 0); goto bad; } for (;;) { error = decomp ? inflate(&zbuf, Z_SYNC_FLUSH) : deflate(&zbuf, Z_FINISH); if (error != Z_OK && error != Z_STREAM_END) { SDT_PROBE6(opencrypto, deflate, deflate_global, bad, decomp, error, __LINE__, zbuf.avail_in, zbuf.avail_out, zbuf.total_out); goto bad; } SDT_PROBE6(opencrypto, deflate, deflate_global, iter, decomp, error, __LINE__, zbuf.avail_in, zbuf.avail_out, zbuf.total_out); if (decomp && zbuf.avail_in == 0 && error == Z_STREAM_END) { /* Done. */ break; } else if (!decomp && error == Z_STREAM_END) { /* Done. */ break; } else if (zbuf.avail_out == 0) { struct deflate_buf *p; /* We need more output space for another iteration. */ p = malloc(sizeof(*p) + (size_t)(size * i), M_CRYPTO_DATA, M_NOWAIT); if (p == NULL) { SDT_PROBE6(opencrypto, deflate, deflate_global, bad, decomp, 0, __LINE__, 0, 0, 0); goto bad; } p->next = NULL; p->size = size * i; bufp->next = p; bufp = p; zbuf.next_out = bufp->data; zbuf.avail_out = bufp->size; } else { /* Unexpect result. */ - SDT_PROBE6(opencrypto, deflate, deflate_global, bad, - decomp, error, __LINE__, + SDT_PROBE6(opencrypto, deflate, deflate_global, + bad, decomp, error, __LINE__, zbuf.avail_in, zbuf.avail_out, zbuf.total_out); goto bad; } } result = count = zbuf.total_out; *out = malloc(result, M_CRYPTO_DATA, M_NOWAIT); if (*out == NULL) { SDT_PROBE6(opencrypto, deflate, deflate_global, bad, decomp, 0, __LINE__, 0, 0, 0); goto bad; } if (decomp) inflateEnd(&zbuf); else deflateEnd(&zbuf); output = *out; for (bufp = bufh; bufp != NULL; ) { if (count > bufp->size) { struct deflate_buf *p; bcopy(bufp->data, *out, bufp->size); *out += bufp->size; count -= bufp->size; p = bufp; bufp = bufp->next; free(p, M_CRYPTO_DATA); } else { /* It should be the last buffer. */ bcopy(bufp->data, *out, count); *out += count; free(bufp, M_CRYPTO_DATA); bufp = NULL; count = 0; } } *out = output; SDT_PROBE2(opencrypto, deflate, deflate_global, return, decomp, result); return result; bad: if (decomp) inflateEnd(&zbuf); else deflateEnd(&zbuf); for (bufp = bufh; bufp != NULL; ) { struct deflate_buf *p; p = bufp; bufp = bufp->next; free(p, M_CRYPTO_DATA); } bad2: *out = NULL; return 0; -} - -void * -z_alloc(nil, type, size) - void *nil; - u_int type, size; -{ - void *ptr; - - ptr = malloc(type *size, M_CRYPTO_DATA, M_NOWAIT); - return ptr; -} - -void -z_free(nil, ptr) - void *nil, *ptr; -{ - free(ptr, M_CRYPTO_DATA); } Index: head/sys/opencrypto/deflate.h =================================================================== --- head/sys/opencrypto/deflate.h (revision 350495) +++ head/sys/opencrypto/deflate.h (revision 350496) @@ -1,60 +1,56 @@ /* $FreeBSD$ */ /* $OpenBSD: deflate.h,v 1.3 2002/03/14 01:26:51 millert Exp $ */ /*- * Copyright (c) 2001 Jean-Jacques Bernard-Gundol (jj@wabbitt.org) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Definition for the wrapper around the deflate compression * algorithm used in /sys/crypto */ #ifndef _CRYPTO_DEFLATE_H_ #define _CRYPTO_DEFLATE_H_ -#include - #define Z_METHOD 8 #define Z_MEMLEVEL 8 #define MINCOMP 2 /* won't be used, but must be defined */ #define ZBUF 10 u_int32_t deflate_global(u_int8_t *, u_int32_t, int, u_int8_t **); -void *z_alloc(void *, u_int, u_int); -void z_free(void *, void *); /* * We are going to use a combined allocation to hold the metadata * from the struct immediately followed by the real application data. */ struct deflate_buf { struct deflate_buf *next; uint32_t size; uint8_t data[]; }; #endif /* _CRYPTO_DEFLATE_H_ */ Index: head/sys/sys/zlib.h =================================================================== --- head/sys/sys/zlib.h (revision 350495) +++ head/sys/sys/zlib.h (revision 350496) @@ -1,1020 +1,1020 @@ /* $FreeBSD$ */ /* * This file is derived from zlib.h and zconf.h from the zlib-1.0.4 * distribution by Jean-loup Gailly and Mark Adler, with some additions * by Paul Mackerras to aid in implementing Deflate compression and * decompression for PPP packets. */ /* * ==FILEVERSION 971127== * * This marker is used by the Linux installation script to determine * whether an up-to-date version of this file is already installed. */ /* +++ zlib.h */ /*- SPDX-License-Identifier: BSD-3-Clause zlib.h -- interface of the 'zlib' general purpose compression library version 1.0.4, Jul 24th, 1996. Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler gzip@prep.ai.mit.edu madler@alumni.caltech.edu */ /* The data format used by the zlib library is described by RFCs (Request for Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). */ #ifndef _ZLIB_H #define _ZLIB_H #ifdef __cplusplus extern "C" { #endif /* +++ zconf.h */ /* zconf.h -- configuration of the zlib compression library * Copyright (C) 1995-1996 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ /* From: zconf.h,v 1.20 1996/07/02 15:09:28 me Exp $ */ #ifndef _ZCONF_H #define _ZCONF_H /* * If you *really* need a unique prefix for all types and library functions, * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. */ -#ifdef Z_PREFIX -# define deflateInit_ z_deflateInit_ -# define deflate z_deflate -# define deflateEnd z_deflateEnd -# define inflateInit_ z_inflateInit_ -# define inflate z_inflate -# define inflateEnd z_inflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateSetDictionary z_deflateSetDictionary -# define deflateCopy z_deflateCopy -# define deflateReset z_deflateReset -# define deflateParams z_deflateParams -# define inflateInit2_ z_inflateInit2_ -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateReset z_inflateReset -# define compress z_compress -# define uncompress z_uncompress -# define adler32 z_adler32 +#ifdef _KERNEL +# define deflateInit_ zlib104_deflateInit_ +# define deflate zlib104_deflate +# define deflateEnd zlib104_deflateEnd +# define inflateInit_ zlib104_inflateInit_ +# define inflate zlib104_inflate +# define inflateEnd zlib104_inflateEnd +# define deflateInit2_ zlib104_deflateInit2_ +# define deflateSetDictionary zlib104_deflateSetDictionary +# define deflateCopy zlib104_deflateCopy +# define deflateReset zlib104_deflateReset +# define deflateParams zlib104_deflateParams +# define inflateInit2_ zlib104_inflateInit2_ +# define inflateSetDictionary zlib104_inflateSetDictionary +# define inflateSync zlib104_inflateSync +# define inflateReset zlib104_inflateReset +# define compress zlib104_compress +# define uncompress zlib104_uncompress +# define adler32 zlib104_adler32 #if 0 -# define crc32 z_crc32 -# define get_crc_table z_get_crc_table +# define crc32 zlib104_crc32 +# define get_crc_table zlib104_get_crc_table #endif -# define Byte z_Byte -# define uInt z_uInt -# define uLong z_uLong -# define Bytef z_Bytef -# define charf z_charf -# define intf z_intf -# define uIntf z_uIntf -# define uLongf z_uLongf -# define voidpf z_voidpf -# define voidp z_voidp +# define Byte zlib104_Byte +# define uInt zlib104_uInt +# define uLong zlib104_uLong +# define Bytef zlib104_Bytef +# define charf zlib104_charf +# define intf zlib104_intf +# define uIntf zlib104_uIntf +# define uLongf zlib104_uLongf +# define voidpf zlib104_voidpf +# define voidp zlib104_voidp #endif #if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) # define WIN32 #endif #if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(__i386__) # ifndef __32BIT__ # define __32BIT__ # endif #endif #if defined(__MSDOS__) && !defined(MSDOS) # define MSDOS #endif /* * Compile with -DMAXSEG_64K if the alloc function cannot allocate more * than 64k bytes at a time (needed on systems with 16-bit int). */ #if defined(MSDOS) && !defined(__32BIT__) # define MAXSEG_64K #endif #ifdef MSDOS # define UNALIGNED_OK #endif #if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC) # define STDC #endif #if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC) # define STDC #endif #ifndef STDC # ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ # define const # endif #endif /* Some Mac compilers merge all .h files incorrectly: */ #if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__) # define NO_DUMMY_DECL #endif /* Maximum value for memLevel in deflateInit2 */ #ifndef MAX_MEM_LEVEL # ifdef MAXSEG_64K # define MAX_MEM_LEVEL 8 # else # define MAX_MEM_LEVEL 9 # endif #endif /* Maximum value for windowBits in deflateInit2 and inflateInit2 */ #ifndef MAX_WBITS # define MAX_WBITS 15 /* 32K LZ77 window */ #endif /* The memory requirements for deflate are (in bytes): 1 << (windowBits+2) + 1 << (memLevel+9) that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) plus a few kilobytes for small objects. For example, if you want to reduce the default memory requirements from 256K to 128K, compile with make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" Of course this will generally degrade compression (there's no free lunch). The memory requirements for inflate are (in bytes) 1 << windowBits that is, 32K for windowBits=15 (default value) plus a few kilobytes for small objects. */ /* Type declarations */ #ifndef OF /* function prototypes */ # ifdef STDC # define OF(args) args # else # define OF(args) () # endif #endif /* The following definitions for FAR are needed only for MSDOS mixed * model programming (small or medium model with some far allocations). * This was tested only with MSC; for other MSDOS compilers you may have * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, * just define FAR to be empty. */ #if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__) /* MSC small or medium model */ # define SMALL_MEDIUM # ifdef _MSC_VER # define FAR __far # else # define FAR far # endif #endif #if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__)) # ifndef __32BIT__ # define SMALL_MEDIUM # define FAR __far # endif #endif #ifndef FAR # define FAR #endif typedef unsigned char Byte; /* 8 bits */ typedef unsigned int uInt; /* 16 bits or more */ typedef unsigned long uLong; /* 32 bits or more */ #if defined(__BORLANDC__) && defined(SMALL_MEDIUM) /* Borland C/C++ ignores FAR inside typedef */ # define Bytef Byte FAR #else typedef Byte FAR Bytef; #endif typedef char FAR charf; typedef int FAR intf; typedef uInt FAR uIntf; typedef uLong FAR uLongf; #ifdef STDC typedef void FAR *voidpf; typedef void *voidp; #else typedef Byte FAR *voidpf; typedef Byte *voidp; #endif /* Compile with -DZLIB_DLL for Windows DLL support */ #if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL) # include # define EXPORT WINAPI #else # define EXPORT #endif #endif /* _ZCONF_H */ /* --- zconf.h */ #define ZLIB_VERSION "1.0.4P" /* The 'zlib' compression library provides in-memory compression and decompression functions, including integrity checks of the uncompressed data. This version of the library supports only one compression method (deflation) but other algorithms may be added later and will have the same stream interface. For compression the application must provide the output buffer and may optionally provide the input buffer for optimization. For decompression, the application must provide the input buffer and may optionally provide the output buffer for optimization. Compression can be done in a single step if the buffers are large enough (for example if an input file is mmap'ed), or can be done by repeated calls of the compression function. In the latter case, the application must provide more input and/or consume the output (providing more output space) before each call. The library does not install any signal handler. It is recommended to add at least a handler for SIGSEGV when decompressing; the library checks the consistency of the input data whenever possible but may go nuts for some forms of corrupted input. */ typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); typedef void (*free_func) OF((voidpf opaque, voidpf address)); struct internal_state; typedef struct z_stream_s { Bytef *next_in; /* next input byte */ uInt avail_in; /* number of bytes available at next_in */ uLong total_in; /* total nb of input bytes read so far */ Bytef *next_out; /* next output byte should be put there */ uInt avail_out; /* remaining free space at next_out */ uLong total_out; /* total nb of bytes output so far */ const char *msg; /* last error message, NULL if no error */ struct internal_state FAR *state; /* not visible by applications */ alloc_func zalloc; /* used to allocate the internal state */ free_func zfree; /* used to free the internal state */ voidpf opaque; /* private data object passed to zalloc and zfree */ int data_type; /* best guess about the data type: ascii or binary */ uLong adler; /* adler32 value of the uncompressed data */ uLong reserved; /* reserved for future use */ } z_stream; typedef z_stream FAR *z_streamp; /* The application must update next_in and avail_in when avail_in has dropped to zero. It must update next_out and avail_out when avail_out has dropped to zero. The application must initialize zalloc, zfree and opaque before calling the init function. All other fields are set by the compression library and must not be updated by the application. The opaque value provided by the application will be passed as the first parameter for calls of zalloc and zfree. This can be useful for custom memory management. The compression library attaches no meaning to the opaque value. zalloc must return Z_NULL if there is not enough memory for the object. On 16-bit systems, the functions zalloc and zfree must be able to allocate exactly 65536 bytes, but will not be required to allocate more than this if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers returned by zalloc for objects of exactly 65536 bytes *must* have their offset normalized to zero. The default allocation function provided by this library ensures this (see zutil.c). To reduce memory requirements and avoid any allocation of 64K objects, at the expense of compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). The fields total_in and total_out can be used for statistics or progress reports. After compression, total_in holds the total size of the uncompressed data and may be saved for use in the decompressor (particularly if the decompressor wants to decompress everything in a single step). */ /* constants */ #define Z_NO_FLUSH 0 #define Z_PARTIAL_FLUSH 1 #define Z_PACKET_FLUSH 2 #define Z_SYNC_FLUSH 3 #define Z_FULL_FLUSH 4 #define Z_FINISH 5 /* Allowed flush values; see deflate() below for details */ #define Z_OK 0 #define Z_STREAM_END 1 #define Z_NEED_DICT 2 #define Z_ERRNO (-1) #define Z_STREAM_ERROR (-2) #define Z_DATA_ERROR (-3) #define Z_MEM_ERROR (-4) #define Z_BUF_ERROR (-5) #define Z_VERSION_ERROR (-6) /* Return codes for the compression/decompression functions. Negative * values are errors, positive values are used for special but normal events. */ #define Z_NO_COMPRESSION 0 #define Z_BEST_SPEED 1 #define Z_BEST_COMPRESSION 9 #define Z_DEFAULT_COMPRESSION (-1) /* compression levels */ #define Z_FILTERED 1 #define Z_HUFFMAN_ONLY 2 #define Z_DEFAULT_STRATEGY 0 /* compression strategy; see deflateInit2() below for details */ #define Z_BINARY 0 #define Z_ASCII 1 #define Z_UNKNOWN 2 /* Possible values of the data_type field */ #define Z_DEFLATED 8 /* The deflate compression method (the only one supported in this version) */ #define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ #define zlib_version zlibVersion() /* for compatibility with versions < 1.0.2 */ /* basic functions */ extern const char * EXPORT zlibVersion OF((void)); /* The application can compare zlibVersion and ZLIB_VERSION for consistency. If the first character differs, the library code actually used is not compatible with the zlib.h header file used by the application. This check is automatically made by deflateInit and inflateInit. */ /* extern int EXPORT deflateInit OF((z_streamp strm, int level)); Initializes the internal stream state for compression. The fields zalloc, zfree and opaque must be initialized before by the caller. If zalloc and zfree are set to Z_NULL, deflateInit updates them to use default allocation functions. The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: 1 gives best speed, 9 gives best compression, 0 gives no compression at all (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION requests a default compromise between speed and compression (currently equivalent to level 6). deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough memory, Z_STREAM_ERROR if level is not a valid compression level, Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible with the version assumed by the caller (ZLIB_VERSION). msg is set to null if there is no error message. deflateInit does not perform any compression: this will be done by deflate(). */ extern int EXPORT deflate OF((z_streamp strm, int flush)); /* Performs one or both of the following actions: - Compress more input starting at next_in and update next_in and avail_in accordingly. If not all input can be processed (because there is not enough room in the output buffer), next_in and avail_in are updated and processing will resume at this point for the next call of deflate(). - Provide more output starting at next_out and update next_out and avail_out accordingly. This action is forced if the parameter flush is non zero. Forcing flush frequently degrades the compression ratio, so this parameter should be set only when necessary (in interactive applications). Some output may be provided even if flush is not set. Before the call of deflate(), the application should ensure that at least one of the actions is possible, by providing more input and/or consuming more output, and updating avail_in or avail_out accordingly; avail_out should never be zero before the call. The application can consume the compressed output when it wants, for example when the output buffer is full (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK and with zero avail_out, it must be called again after making room in the output buffer because there might be more output pending. If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression block is terminated and flushed to the output buffer so that the decompressor can get all input data available so far. For method 9, a future variant on method 8, the current block will be flushed but not terminated. Z_SYNC_FLUSH has the same effect as partial flush except that the compressed output is byte aligned (the compressor can clear its internal bit buffer) and the current block is always terminated; this can be useful if the compressor has to be restarted from scratch after an interruption (in which case the internal state of the compressor may be lost). If flush is set to Z_FULL_FLUSH, the compression block is terminated, a special marker is output and the compression dictionary is discarded; this is useful to allow the decompressor to synchronize if one compressed block has been damaged (see inflateSync below). Flushing degrades compression and so should be used only when necessary. Using Z_FULL_FLUSH too often can seriously degrade the compression. If deflate returns with avail_out == 0, this function must be called again with the same value of the flush parameter and more output space (updated avail_out), until the flush is complete (deflate returns with non-zero avail_out). If the parameter flush is set to Z_PACKET_FLUSH, the compression block is terminated, and a zero-length stored block is output, omitting the length bytes (the effect of this is that the 3-bit type code 000 for a stored block is output, and the output is then byte-aligned). This is designed for use at the end of a PPP packet. If the parameter flush is set to Z_FINISH, pending input is processed, pending output is flushed and deflate returns with Z_STREAM_END if there was enough output space; if deflate returns with Z_OK, this function must be called again with Z_FINISH and more output space (updated avail_out) but no more input data, until it returns with Z_STREAM_END or an error. After deflate has returned Z_STREAM_END, the only possible operations on the stream are deflateReset or deflateEnd. Z_FINISH can be used immediately after deflateInit if all the compression is to be done in a single step. In this case, avail_out must be at least 0.1% larger than avail_in plus 12 bytes. If deflate does not return Z_STREAM_END, then it must be called again as described above. deflate() may update data_type if it can make a good guess about the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered binary. This field is only for information purposes and does not affect the compression algorithm in any manner. deflate() returns Z_OK if some progress has been made (more input processed or more output produced), Z_STREAM_END if all input has been consumed and all output has been produced (only when flush is set to Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible. */ extern int EXPORT deflateEnd OF((z_streamp strm)); /* All dynamically allocated data structures for this stream are freed. This function discards any unprocessed input and does not flush any pending output. deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state was inconsistent, Z_DATA_ERROR if the stream was freed prematurely (some input or output was discarded). In the error case, msg may be set but then points to a static string (which must not be deallocated). */ /* extern int EXPORT inflateInit OF((z_streamp strm)); Initializes the internal stream state for decompression. The fields zalloc, zfree and opaque must be initialized before by the caller. If zalloc and zfree are set to Z_NULL, inflateInit updates them to use default allocation functions. inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough memory, Z_VERSION_ERROR if the zlib library version is incompatible with the version assumed by the caller. msg is set to null if there is no error message. inflateInit does not perform any decompression: this will be done by inflate(). */ #if defined(__FreeBSD__) && defined(_KERNEL) -#define inflate _zlib104_inflate /* FreeBSD already has an inflate :-( */ +#define inflate zlib104_inflate /* FreeBSD already has an inflate :-( */ #endif extern int EXPORT inflate OF((z_streamp strm, int flush)); /* Performs one or both of the following actions: - Decompress more input starting at next_in and update next_in and avail_in accordingly. If not all input can be processed (because there is not enough room in the output buffer), next_in is updated and processing will resume at this point for the next call of inflate(). - Provide more output starting at next_out and update next_out and avail_out accordingly. inflate() provides as much output as possible, until there is no more input data or no more space in the output buffer (see below about the flush parameter). Before the call of inflate(), the application should ensure that at least one of the actions is possible, by providing more input and/or consuming more output, and updating the next_* and avail_* values accordingly. The application can consume the uncompressed output when it wants, for example when the output buffer is full (avail_out == 0), or after each call of inflate(). If inflate returns Z_OK and with zero avail_out, it must be called again after making room in the output buffer because there might be more output pending. If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, inflate flushes as much output as possible to the output buffer. The flushing behavior of inflate is not specified for values of the flush parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the current implementation actually flushes as much output as possible anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data has been consumed, it is expecting to see the length field of a stored block; if not, it returns Z_DATA_ERROR. inflate() should normally be called until it returns Z_STREAM_END or an error. However if all decompression is to be performed in a single step (a single call of inflate), the parameter flush should be set to Z_FINISH. In this case all pending input is processed and all pending output is flushed; avail_out must be large enough to hold all the uncompressed data. (The size of the uncompressed data may have been saved by the compressor for this purpose.) The next operation on this stream must be inflateEnd to deallocate the decompression state. The use of Z_FINISH is never required, but can be used to inform inflate that a faster routine may be used for the single inflate() call. inflate() returns Z_OK if some progress has been made (more input processed or more output produced), Z_STREAM_END if the end of the compressed data has been reached and all uncompressed output has been produced, Z_NEED_DICT if a preset dictionary is needed at this point (see inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if the stream structure was inconsistent (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no progress is possible or if there was not enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then call inflateSync to look for a good compression block. In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the dictionary chosen by the compressor. */ extern int EXPORT inflateEnd OF((z_streamp strm)); /* All dynamically allocated data structures for this stream are freed. This function discards any unprocessed input and does not flush any pending output. inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state was inconsistent. In the error case, msg may be set but then points to a static string (which must not be deallocated). */ /* Advanced functions */ /* The following functions are needed only in some special applications. */ /* extern int EXPORT deflateInit2 OF((z_streamp strm, int level, int method, int windowBits, int memLevel, int strategy)); This is another version of deflateInit with more compression options. The fields next_in, zalloc, zfree and opaque must be initialized before by the caller. The method parameter is the compression method. It must be Z_DEFLATED in this version of the library. (Method 9 will allow a 64K history buffer and partial block flushes.) The windowBits parameter is the base two logarithm of the window size (the size of the history buffer). It should be in the range 8..15 for this version of the library (the value 16 will be allowed for method 9). Larger values of this parameter result in better compression at the expense of memory usage. The default value is 15 if deflateInit is used instead. The memLevel parameter specifies how much memory should be allocated for the internal compression state. memLevel=1 uses minimum memory but is slow and reduces compression ratio; memLevel=9 uses maximum memory for optimal speed. The default value is 8. See zconf.h for total memory usage as a function of windowBits and memLevel. The strategy parameter is used to tune the compression algorithm. Use the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no string match). Filtered data consists mostly of small values with a somewhat random distribution. In this case, the compression algorithm is tuned to compress them better. The effect of Z_FILTERED is to force more Huffman coding and less string matching; it is somewhat intermediate between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects the compression ratio but not the correctness of the compressed output even if it is not set appropriately. If next_in is not null, the library will use this buffer to hold also some history information; the buffer must either hold the entire input data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in is null, the library will allocate its own history buffer (and leave next_in null). next_out need not be provided here but must be provided by the application for the next call of deflate(). If the history buffer is provided by the application, next_in must must never be changed by the application since the compressor maintains information inside this buffer from call to call; the application must provide more input only by increasing avail_in. next_in is always reset by the library in this case. deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid method). msg is set to null if there is no error message. deflateInit2 does not perform any compression: this will be done by deflate(). */ extern int EXPORT deflateSetDictionary OF((z_streamp strm, const Bytef *dictionary, uInt dictLength)); /* Initializes the compression dictionary (history buffer) from the given byte sequence without producing any compressed output. This function must be called immediately after deflateInit or deflateInit2, before any call of deflate. The compressor and decompressor must use exactly the same dictionary (see inflateSetDictionary). The dictionary should consist of strings (byte sequences) that are likely to be encountered later in the data to be compressed, with the most commonly used strings preferably put towards the end of the dictionary. Using a dictionary is most useful when the data to be compressed is short and can be predicted with good accuracy; the data can then be compressed better than with the default empty dictionary. In this version of the library, only the last 32K bytes of the dictionary are used. Upon return of this function, strm->adler is set to the Adler32 value of the dictionary; the decompressor may later use this value to determine which dictionary has been used by the compressor. (The Adler32 value applies to the whole dictionary even if only a subset of the dictionary is actually used by the compressor.) deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a parameter is invalid (such as NULL dictionary) or the stream state is inconsistent (for example if deflate has already been called for this stream). deflateSetDictionary does not perform any compression: this will be done by deflate(). */ extern int EXPORT deflateCopy OF((z_streamp dest, z_streamp source)); /* Sets the destination stream as a complete copy of the source stream. If the source stream is using an application-supplied history buffer, a new buffer is allocated for the destination stream. The compressed output buffer is always application-supplied. It's the responsibility of the application to provide the correct values of next_out and avail_out for the next call of deflate. This function can be useful when several compression strategies will be tried, for example when there are several ways of pre-processing the input data with a filter. The streams that will be discarded should then be freed by calling deflateEnd. Note that deflateCopy duplicates the internal compression state which can be quite large, so this strategy is slow and can consume lots of memory. deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not enough memory, Z_STREAM_ERROR if the source stream state was inconsistent (such as zalloc being NULL). msg is left unchanged in both source and destination. */ extern int EXPORT deflateReset OF((z_streamp strm)); /* This function is equivalent to deflateEnd followed by deflateInit, but does not free and reallocate all the internal compression state. The stream will keep the same compression level and any other attributes that may have been set by deflateInit2. deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source stream state was inconsistent (such as zalloc or state being NULL). */ extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy)); /* Dynamically update the compression level and compression strategy. This can be used to switch between compression and straight copy of the input data, or to switch to a different kind of input data requiring a different strategy. If the compression level is changed, the input available so far is compressed with the old level (and may be flushed); the new level will take effect only at the next call of deflate(). Before the call of deflateParams, the stream state must be set as for a call of deflate(), since the currently available input may have to be compressed and flushed. In particular, strm->avail_out must be non-zero. deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if strm->avail_out was zero. */ extern int EXPORT deflateOutputPending OF((z_streamp strm)); /* Returns the number of bytes of output which are immediately available from the compressor (i.e. without any further input or flush). */ /* extern int EXPORT inflateInit2 OF((z_streamp strm, int windowBits)); This is another version of inflateInit with more compression options. The fields next_out, zalloc, zfree and opaque must be initialized before by the caller. The windowBits parameter is the base two logarithm of the maximum window size (the size of the history buffer). It should be in the range 8..15 for this version of the library (the value 16 will be allowed soon). The default value is 15 if inflateInit is used instead. If a compressed stream with a larger window size is given as input, inflate() will return with the error code Z_DATA_ERROR instead of trying to allocate a larger window. If next_out is not null, the library will use this buffer for the history buffer; the buffer must either be large enough to hold the entire output data, or have at least 1<