Index: head/sys/kern/capabilities.conf =================================================================== --- head/sys/kern/capabilities.conf (revision 350446) +++ head/sys/kern/capabilities.conf (revision 350447) @@ -1,753 +1,758 @@ ## ## Copyright (c) 2008-2010 Robert N. M. Watson ## All rights reserved. ## ## This software was developed at the University of Cambridge Computer ## Laboratory with support from a grant from Google, Inc. ## ## Redistribution and use in source and binary forms, with or without ## modification, are permitted provided that the following conditions ## are met: ## 1. Redistributions of source code must retain the above copyright ## notice, this list of conditions and the following disclaimer. ## 2. Redistributions in binary form must reproduce the above copyright ## notice, this list of conditions and the following disclaimer in the ## documentation and/or other materials provided with the distribution. ## ## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE ## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ## SUCH DAMAGE. ## ## List of system calls enabled in capability mode, one name per line. ## ## Notes: ## - sys_exit(2), abort2(2) and close(2) are very important. ## - Sorted alphabetically, please keep it that way. ## ## $FreeBSD$ ## ## ## Allow ACL and MAC label operations by file descriptor, subject to ## capability rights. Allow MAC label operations on the current process but ## we will need to scope __mac_get_pid(2). ## __acl_aclcheck_fd __acl_delete_fd __acl_get_fd __acl_set_fd __mac_get_fd #__mac_get_pid __mac_get_proc __mac_set_fd __mac_set_proc ## ## Allow sysctl(2) as we scope internal to the call; this is a global ## namespace, but there are several critical sysctls required for almost ## anything to run, such as hw.pagesize. For now that policy lives in the ## kernel for performance and simplicity, but perhaps it could move to a ## proxying daemon in userspace. ## __sysctl ## ## Allow umtx operations as these are scoped by address space. ## ## XXRW: Need to check this very carefully. ## _umtx_op ## ## Allow process termination using abort2(2). ## abort2 ## ## Allow accept(2) since it doesn't manipulate namespaces directly, rather ## relies on existing bindings on a socket, subject to capability rights. ## accept accept4 ## ## Allow AIO operations by file descriptor, subject to capability rights. ## aio_cancel aio_error aio_fsync aio_read aio_return aio_suspend aio_waitcomplete aio_write ## ## audit(2) is a global operation, submitting to the global trail, but it is ## controlled by privilege, and it might be useful to be able to submit ## records from sandboxes. For now, disallow, but we may want to think about ## providing some sort of proxy service for this. ## #audit ## ## Allow bindat(2). ## bindat ## ## Allow capability mode and capability system calls. ## cap_enter cap_fcntls_get cap_fcntls_limit cap_getmode cap_ioctls_get cap_ioctls_limit __cap_rights_get cap_rights_limit ## ## Allow read-only clock operations. ## clock_getres clock_gettime ## ## Always allow file descriptor close(2). ## close closefrom ## ## Allow connectat(2). ## connectat ## +## copy_file_range(2) reads from one descriptor and writes to the other. +## +copy_file_range + +## ## cpuset(2) and related calls are limited to caller's own process/thread. ## #cpuset cpuset_getaffinity #cpuset_getid cpuset_setaffinity #cpuset_setid ## ## Always allow dup(2) and dup2(2) manipulation of the file descriptor table. ## dup dup2 ## ## Allow extended attribute operations by file descriptor, subject to ## capability rights. ## extattr_delete_fd extattr_get_fd extattr_list_fd extattr_set_fd ## ## Allow changing file flags, mode, and owner by file descriptor, subject to ## capability rights. ## fchflags fchmod fchown ## ## For now, allow fcntl(2), subject to capability rights, but this probably ## needs additional scoping. ## fcntl ## ## Allow fexecve(2), subject to capability rights. We perform some scoping, ## such as disallowing privilege escalation. ## fexecve ## ## Allow flock(2), subject to capability rights. ## flock ## ## Allow fork(2), even though it returns pids -- some applications seem to ## prefer this interface. ## fork ## ## Allow fpathconf(2), subject to capability rights. ## fpathconf ## ## Allow various file descriptor-based I/O operations, subject to capability ## rights. ## freebsd11_fstat freebsd11_fstatat freebsd11_getdirentries freebsd11_fstatfs freebsd11_mknodat freebsd6_ftruncate freebsd6_lseek freebsd6_mmap freebsd6_pread freebsd6_pwrite ## ## Allow querying file and file system state with fstat(2) and fstatfs(2), ## subject to capability rights. ## fstat fstatfs ## ## Allow further file descriptor-based I/O operations, subject to capability ## rights. ## fsync ftruncate ## ## Allow futimens(2) and futimes(2), subject to capability rights. ## futimens futimes ## ## Allow querying process audit state, subject to normal access control. ## getaudit getaudit_addr getauid ## ## Allow thread context management with getcontext(2). ## getcontext ## ## Allow directory I/O on a file descriptor, subject to capability rights. ## Originally we had separate capabilities for directory-specific read ## operations, but on BSD we allow reading the raw directory data, so we just ## rely on CAP_READ now. ## getdents getdirentries ## ## Allow querying certain trivial global state. ## getdomainname ## ## Allow querying certain per-process resource limit state. ## getdtablesize ## ## Allow querying current process credential state. ## getegid geteuid ## ## Allow querying certain trivial global state. ## gethostid gethostname ## ## Allow querying per-process timer. ## getitimer ## ## Allow querying current process credential state. ## getgid getgroups getlogin ## ## Allow querying certain trivial global state. ## getpagesize getpeername ## ## Allow querying certain per-process scheduling, resource limit, and ## credential state. ## ## XXXRW: getpgid(2) needs scoping. It's not clear if it's worth scoping ## getppid(2). getpriority(2) needs scoping. getrusage(2) needs scoping. ## getsid(2) needs scoping. ## getpgid getpgrp getpid getppid getpriority getresgid getresuid getrlimit getrusage getsid ## ## Allow getrandom ## getrandom ## ## Allow querying socket state, subject to capability rights. ## ## XXXRW: getsockopt(2) may need more attention. ## getsockname getsockopt ## ## Allow querying the global clock. ## gettimeofday ## ## Allow querying current process credential state. ## getuid ## ## Allow ioctl(2), which hopefully will be limited by applications only to ## required commands with cap_ioctls_limit(2) syscall. ## ioctl ## ## Allow querying current process credential state. ## issetugid ## ## Allow kevent(2), as we will authorize based on capability rights on the ## target descriptor. ## kevent ## ## Allow kill(2), as we allow the process to send signals only to himself. ## kill ## ## Allow message queue operations on file descriptors, subject to capability ## rights. ## NOTE: Corresponding sysents are initialized in sys/kern/uipc_mqueue.c with ## SYF_CAPENABLED. ## kmq_notify kmq_setattr kmq_timedreceive kmq_timedsend ## ## Allow kqueue(2), we will control use. ## kqueue ## ## Allow managing per-process timers. ## ktimer_create ktimer_delete ktimer_getoverrun ktimer_gettime ktimer_settime ## ## We can't allow ktrace(2) because it relies on a global namespace, but we ## might want to introduce an fktrace(2) of some sort. ## #ktrace ## ## Allow AIO operations by file descriptor, subject to capability rights. ## lio_listio ## ## Allow listen(2), subject to capability rights. ## ## XXXRW: One might argue this manipulates a global namespace. ## listen ## ## Allow I/O-related file descriptors, subject to capability rights. ## lseek ## ## Allow simple VM operations on the current process. ## madvise mincore minherit mlock mlockall ## ## Allow memory mapping a file descriptor, and updating protections, subject ## to capability rights. ## mmap mprotect ## ## Allow simple VM operations on the current process. ## msync munlock munlockall munmap ## ## Allow the current process to sleep. ## nanosleep ## ## Allow querying the global clock. ## ntp_gettime ## ## Allow AIO operations by file descriptor, subject to capability rights. ## oaio_read oaio_write ## ## Allow simple VM operations on the current process. ## break ## ## Allow AIO operations by file descriptor, subject to capability rights. ## olio_listio ## ## Operations relative to directory capabilities. ## chflagsat faccessat fchmodat fchownat fstatat futimesat linkat mkdirat mkfifoat mknodat openat readlinkat renameat symlinkat unlinkat funlinkat utimensat ## ## Process descriptor-related system calls are allowed. ## pdfork pdgetpid pdkill #pdwait4 # not yet implemented ## ## Allow pipe(2). ## pipe pipe2 ## ## Allow poll(2), which will be scoped by capability rights. ## poll ppoll ## ## Allow I/O-related file descriptors, subject to capability rights. ## posix_fallocate pread preadv ## ## Allow access to profiling state on the current process. ## profil ## ## Disallow ptrace(2) for now, but we do need debugging facilities in ## capability mode, so we will want to revisit this, possibly by scoping its ## operation. ## #ptrace ## ## Allow I/O-related file descriptors, subject to capability rights. ## pwrite pwritev read readv recv recvfrom recvmsg ## ## Allow real-time scheduling primitives to be used. ## ## XXXRW: These require scoping. ## rtprio rtprio_thread ## ## Allow simple VM operations on the current process. ## sbrk ## ## Allow querying trivial global scheduler state. ## sched_get_priority_max sched_get_priority_min ## ## Allow various thread/process scheduler operations. ## ## XXXRW: Some of these require further scoping. ## sched_getparam sched_getscheduler sched_rr_get_interval sched_setparam sched_setscheduler sched_yield ## ## Allow I/O-related file descriptors, subject to capability rights. ## NOTE: Corresponding sysents are initialized in sys/netinet/sctp_syscalls.c ## with SYF_CAPENABLED. ## sctp_generic_recvmsg sctp_generic_sendmsg sctp_generic_sendmsg_iov sctp_peeloff ## ## Allow pselect(2) and select(2), which will be scoped by capability rights. ## ## XXXRW: But is it? ## pselect select ## ## Allow I/O-related file descriptors, subject to capability rights. Use of ## explicit addresses here is restricted by the system calls themselves. ## send sendfile sendmsg sendto ## ## Allow setting per-process audit state, which is controlled separately by ## privileges. ## setaudit setaudit_addr setauid ## ## Allow setting thread context. ## setcontext ## ## Allow setting current process credential state, which is controlled ## separately by privilege. ## setegid seteuid setgid ## ## Allow use of the process interval timer. ## setitimer ## ## Allow setpriority(2). ## ## XXXRW: Requires scoping. ## setpriority ## ## Allow setting current process credential state, which is controlled ## separately by privilege. ## setregid setresgid setresuid setreuid ## ## Allow setting process resource limits with setrlimit(2). ## setrlimit ## ## Allow creating a new session with setsid(2). ## setsid ## ## Allow setting socket options with setsockopt(2), subject to capability ## rights. ## ## XXXRW: Might require scoping. ## setsockopt ## ## Allow setting current process credential state, which is controlled ## separately by privilege. ## setuid ## ## shm_open(2) is scoped so as to allow only access to new anonymous objects. ## shm_open ## ## Allow I/O-related file descriptors, subject to capability rights. ## shutdown ## ## Allow signal control on current process. ## sigaction sigaltstack sigblock sigpending sigprocmask sigqueue sigreturn sigsetmask sigstack sigsuspend sigtimedwait sigvec sigwaitinfo sigwait ## ## Allow creating new socket pairs with socket(2) and socketpair(2). ## socket socketpair ## ## Allow simple VM operations on the current process. ## ## XXXRW: Kernel doesn't implement this, so drop? ## sstk ## ## Do allow sync(2) for now, but possibly shouldn't. ## sync ## ## Always allow process termination with sys_exit(2). ## sys_exit ## ## sysarch(2) does rather diverse things, but is required on at least i386 ## in order to configure per-thread data. As such, it's scoped on each ## architecture. ## sysarch ## ## Allow thread operations operating only on current process. ## thr_create thr_exit thr_kill ## ## Disallow thr_kill2(2), as it may operate beyond the current process. ## ## XXXRW: Requires scoping. ## #thr_kill2 ## ## Allow thread operations operating only on current process. ## thr_new thr_self thr_set_name thr_suspend thr_wake ## ## Allow manipulation of the current process umask with umask(2). ## umask ## ## Allow submitting of process trace entries with utrace(2). ## utrace ## ## Allow generating UUIDs with uuidgen(2). ## uuidgen ## ## Allow I/O-related file descriptors, subject to capability rights. ## write writev ## ## Allow processes to yield(2). ## yield