Index: head/stand/efi/boot1/boot1.c =================================================================== --- head/stand/efi/boot1/boot1.c (revision 348352) +++ head/stand/efi/boot1/boot1.c (revision 348353) @@ -1,504 +1,518 @@ /*- * Copyright (c) 1998 Robert Nordier * All rights reserved. * Copyright (c) 2001 Robert Drehmel * All rights reserved. * Copyright (c) 2014 Nathan Whitehorn * All rights reserved. * Copyright (c) 2015 Eric McCorkle * All rights reserved. * * Redistribution and use in source and binary forms are freely * permitted provided that the above copyright notice and this * paragraph and the following disclaimer are duplicated in all * such forms. * * This software is provided "AS IS" and without any express or * implied warranties, including, without limitation, the implied * warranties of merchantability and fitness for a particular * purpose. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include "boot_module.h" #include "paths.h" static void efi_panic(EFI_STATUS s, const char *fmt, ...) __dead2 __printflike(2, 3); static const boot_module_t *boot_modules[] = { #ifdef EFI_ZFS_BOOT &zfs_module, #endif #ifdef EFI_UFS_BOOT &ufs_module #endif }; #define NUM_BOOT_MODULES nitems(boot_modules) static EFI_GUID BlockIoProtocolGUID = BLOCK_IO_PROTOCOL; static EFI_GUID DevicePathGUID = DEVICE_PATH_PROTOCOL; static EFI_GUID LoadedImageGUID = LOADED_IMAGE_PROTOCOL; static EFI_GUID ConsoleControlGUID = EFI_CONSOLE_CONTROL_PROTOCOL_GUID; /* - * Provide Malloc / Free backed by EFIs AllocatePool / FreePool which ensures + * Provide Malloc / Free / Calloc backed by EFIs AllocatePool / FreePool which ensures * memory is correctly aligned avoiding EFI_INVALID_PARAMETER returns from * EFI methods. */ + void * Malloc(size_t len, const char *file __unused, int line __unused) { void *out; if (BS->AllocatePool(EfiLoaderData, len, &out) == EFI_SUCCESS) return (out); return (NULL); } void Free(void *buf, const char *file __unused, int line __unused) { if (buf != NULL) (void)BS->FreePool(buf); +} + +void * +Calloc(size_t n1, size_t n2, const char *file, int line) +{ + size_t bytes; + void *res; + + bytes = n1 * n2; + if ((res = Malloc(bytes, file, line)) != NULL) + bzero(res, bytes); + + return (res); } /* * load_loader attempts to load the loader image data. * * It tries each module and its respective devices, identified by mod->probe, * in order until a successful load occurs at which point it returns EFI_SUCCESS * and EFI_NOT_FOUND otherwise. * * Only devices which have preferred matching the preferred parameter are tried. */ static EFI_STATUS load_loader(const boot_module_t **modp, dev_info_t **devinfop, void **bufp, size_t *bufsize, BOOLEAN preferred) { UINTN i; dev_info_t *dev; const boot_module_t *mod; for (i = 0; i < NUM_BOOT_MODULES; i++) { mod = boot_modules[i]; for (dev = mod->devices(); dev != NULL; dev = dev->next) { if (dev->preferred != preferred) continue; if (mod->load(PATH_LOADER_EFI, dev, bufp, bufsize) == EFI_SUCCESS) { *devinfop = dev; *modp = mod; return (EFI_SUCCESS); } } } return (EFI_NOT_FOUND); } /* * try_boot only returns if it fails to load the loader. If it succeeds * it simply boots, otherwise it returns the status of last EFI call. */ static EFI_STATUS try_boot(void) { size_t bufsize, loadersize, cmdsize; void *buf, *loaderbuf; char *cmd; dev_info_t *dev; const boot_module_t *mod; EFI_HANDLE loaderhandle; EFI_LOADED_IMAGE *loaded_image; EFI_STATUS status; status = load_loader(&mod, &dev, &loaderbuf, &loadersize, TRUE); if (status != EFI_SUCCESS) { status = load_loader(&mod, &dev, &loaderbuf, &loadersize, FALSE); if (status != EFI_SUCCESS) { printf("Failed to load '%s'\n", PATH_LOADER_EFI); return (status); } } /* * Read in and parse the command line from /boot.config or /boot/config, * if present. We'll pass it the next stage via a simple ASCII * string. loader.efi has a hack for ASCII strings, so we'll use that to * keep the size down here. We only try to read the alternate file if * we get EFI_NOT_FOUND because all other errors mean that the boot_module * had troubles with the filesystem. We could return early, but we'll let * loading the actual kernel sort all that out. Since these files are * optional, we don't report errors in trying to read them. */ cmd = NULL; cmdsize = 0; status = mod->load(PATH_DOTCONFIG, dev, &buf, &bufsize); if (status == EFI_NOT_FOUND) status = mod->load(PATH_CONFIG, dev, &buf, &bufsize); if (status == EFI_SUCCESS) { cmdsize = bufsize + 1; cmd = malloc(cmdsize); if (cmd == NULL) goto errout; memcpy(cmd, buf, bufsize); cmd[bufsize] = '\0'; free(buf); buf = NULL; } if ((status = BS->LoadImage(TRUE, IH, efi_devpath_last_node(dev->devpath), loaderbuf, loadersize, &loaderhandle)) != EFI_SUCCESS) { printf("Failed to load image provided by %s, size: %zu, (%lu)\n", mod->name, loadersize, EFI_ERROR_CODE(status)); goto errout; } if ((status = BS->HandleProtocol(loaderhandle, &LoadedImageGUID, (VOID**)&loaded_image)) != EFI_SUCCESS) { printf("Failed to query LoadedImage provided by %s (%lu)\n", mod->name, EFI_ERROR_CODE(status)); goto errout; } if (cmd != NULL) printf(" command args: %s\n", cmd); loaded_image->DeviceHandle = dev->devhandle; loaded_image->LoadOptionsSize = cmdsize; loaded_image->LoadOptions = cmd; DPRINTF("Starting '%s' in 5 seconds...", PATH_LOADER_EFI); DSTALL(1000000); DPRINTF("."); DSTALL(1000000); DPRINTF("."); DSTALL(1000000); DPRINTF("."); DSTALL(1000000); DPRINTF("."); DSTALL(1000000); DPRINTF(".\n"); if ((status = BS->StartImage(loaderhandle, NULL, NULL)) != EFI_SUCCESS) { printf("Failed to start image provided by %s (%lu)\n", mod->name, EFI_ERROR_CODE(status)); loaded_image->LoadOptionsSize = 0; loaded_image->LoadOptions = NULL; } errout: if (cmd != NULL) free(cmd); if (buf != NULL) free(buf); if (loaderbuf != NULL) free(loaderbuf); return (status); } /* * probe_handle determines if the passed handle represents a logical partition * if it does it uses each module in order to probe it and if successful it * returns EFI_SUCCESS. */ static EFI_STATUS probe_handle(EFI_HANDLE h, EFI_DEVICE_PATH *imgpath, BOOLEAN *preferred) { dev_info_t *devinfo; EFI_BLOCK_IO *blkio; EFI_DEVICE_PATH *devpath; EFI_STATUS status; UINTN i; /* Figure out if we're dealing with an actual partition. */ status = BS->HandleProtocol(h, &DevicePathGUID, (void **)&devpath); if (status == EFI_UNSUPPORTED) return (status); if (status != EFI_SUCCESS) { DPRINTF("\nFailed to query DevicePath (%lu)\n", EFI_ERROR_CODE(status)); return (status); } #ifdef EFI_DEBUG { CHAR16 *text = efi_devpath_name(devpath); DPRINTF("probing: %S\n", text); efi_free_devpath_name(text); } #endif status = BS->HandleProtocol(h, &BlockIoProtocolGUID, (void **)&blkio); if (status == EFI_UNSUPPORTED) return (status); if (status != EFI_SUCCESS) { DPRINTF("\nFailed to query BlockIoProtocol (%lu)\n", EFI_ERROR_CODE(status)); return (status); } if (!blkio->Media->LogicalPartition) return (EFI_UNSUPPORTED); *preferred = efi_devpath_match(imgpath, devpath); /* Run through each module, see if it can load this partition */ devinfo = malloc(sizeof(*devinfo)); if (devinfo == NULL) { DPRINTF("\nFailed to allocate devinfo\n"); return (EFI_UNSUPPORTED); } devinfo->dev = blkio; devinfo->devpath = devpath; devinfo->devhandle = h; devinfo->preferred = *preferred; devinfo->next = NULL; for (i = 0; i < NUM_BOOT_MODULES; i++) { devinfo->devdata = NULL; status = boot_modules[i]->probe(devinfo); if (status == EFI_SUCCESS) return (EFI_SUCCESS); } free(devinfo); return (EFI_UNSUPPORTED); } /* * probe_handle_status calls probe_handle and outputs the returned status * of the call. */ static void probe_handle_status(EFI_HANDLE h, EFI_DEVICE_PATH *imgpath) { EFI_STATUS status; BOOLEAN preferred; preferred = FALSE; status = probe_handle(h, imgpath, &preferred); DPRINTF("probe: "); switch (status) { case EFI_UNSUPPORTED: printf("."); DPRINTF(" not supported\n"); break; case EFI_SUCCESS: if (preferred) { printf("%c", '*'); DPRINTF(" supported (preferred)\n"); } else { printf("%c", '+'); DPRINTF(" supported\n"); } break; default: printf("x"); DPRINTF(" error (%lu)\n", EFI_ERROR_CODE(status)); break; } DSTALL(500000); } EFI_STATUS efi_main(EFI_HANDLE Ximage, EFI_SYSTEM_TABLE *Xsystab) { EFI_HANDLE *handles; EFI_LOADED_IMAGE *img; EFI_DEVICE_PATH *imgpath; EFI_STATUS status; EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl = NULL; SIMPLE_TEXT_OUTPUT_INTERFACE *conout = NULL; UINTN i, hsize, nhandles; CHAR16 *text; UINT16 boot_current; size_t sz; UINT16 boot_order[100]; /* Basic initialization*/ ST = Xsystab; IH = Ximage; BS = ST->BootServices; RS = ST->RuntimeServices; /* Set up the console, so printf works. */ status = BS->LocateProtocol(&ConsoleControlGUID, NULL, (VOID **)&ConsoleControl); if (status == EFI_SUCCESS) (void)ConsoleControl->SetMode(ConsoleControl, EfiConsoleControlScreenText); /* * Reset the console enable the cursor. Later we'll choose a better * console size through GOP/UGA. */ conout = ST->ConOut; conout->Reset(conout, TRUE); /* Explicitly set conout to mode 0, 80x25 */ conout->SetMode(conout, 0); conout->EnableCursor(conout, TRUE); conout->ClearScreen(conout); printf("\n>> FreeBSD EFI boot block\n"); printf(" Loader path: %s\n\n", PATH_LOADER_EFI); printf(" Initializing modules:"); for (i = 0; i < NUM_BOOT_MODULES; i++) { printf(" %s", boot_modules[i]->name); if (boot_modules[i]->init != NULL) boot_modules[i]->init(); } putchar('\n'); /* Determine the devpath of our image so we can prefer it. */ status = BS->HandleProtocol(IH, &LoadedImageGUID, (VOID**)&img); imgpath = NULL; if (status == EFI_SUCCESS) { text = efi_devpath_name(img->FilePath); if (text != NULL) { printf(" Load Path: %S\n", text); efi_setenv_freebsd_wcs("Boot1Path", text); efi_free_devpath_name(text); } status = BS->HandleProtocol(img->DeviceHandle, &DevicePathGUID, (void **)&imgpath); if (status != EFI_SUCCESS) { DPRINTF("Failed to get image DevicePath (%lu)\n", EFI_ERROR_CODE(status)); } else { text = efi_devpath_name(imgpath); if (text != NULL) { printf(" Load Device: %S\n", text); efi_setenv_freebsd_wcs("Boot1Dev", text); efi_free_devpath_name(text); } } } boot_current = 0; sz = sizeof(boot_current); if (efi_global_getenv("BootCurrent", &boot_current, &sz) == EFI_SUCCESS) { printf(" BootCurrent: %04x\n", boot_current); sz = sizeof(boot_order); if (efi_global_getenv("BootOrder", &boot_order, &sz) == EFI_SUCCESS) { printf(" BootOrder:"); for (i = 0; i < sz / sizeof(boot_order[0]); i++) printf(" %04x%s", boot_order[i], boot_order[i] == boot_current ? "[*]" : ""); printf("\n"); } } #ifdef TEST_FAILURE /* * For testing failover scenarios, it's nice to be able to fail fast. * Define TEST_FAILURE to create a boot1.efi that always fails after * reporting the boot manager protocol details. */ BS->Exit(IH, EFI_OUT_OF_RESOURCES, 0, NULL); #endif hsize = 0; BS->LocateHandle(ByProtocol, &BlockIoProtocolGUID, NULL, &hsize, NULL); handles = malloc(hsize); if (handles == NULL) efi_panic(EFI_OUT_OF_RESOURCES, "Failed to allocate %d handles\n", hsize); status = BS->LocateHandle(ByProtocol, &BlockIoProtocolGUID, NULL, &hsize, handles); if (status != EFI_SUCCESS) efi_panic(status, "Failed to get device handles\n"); /* Scan all partitions, probing with all modules. */ nhandles = hsize / sizeof(*handles); printf(" Probing %zu block devices...", nhandles); DPRINTF("\n"); for (i = 0; i < nhandles; i++) probe_handle_status(handles[i], imgpath); printf(" done\n"); /* Status summary. */ for (i = 0; i < NUM_BOOT_MODULES; i++) { printf(" "); boot_modules[i]->status(); } try_boot(); /* If we get here, we're out of luck... */ efi_panic(EFI_LOAD_ERROR, "No bootable partitions found!"); } /* * add_device adds a device to the passed devinfo list. */ void add_device(dev_info_t **devinfop, dev_info_t *devinfo) { dev_info_t *dev; if (*devinfop == NULL) { *devinfop = devinfo; return; } for (dev = *devinfop; dev->next != NULL; dev = dev->next) ; dev->next = devinfo; } /* * OK. We totally give up. Exit back to EFI with a sensible status so * it can try the next option on the list. */ static void efi_panic(EFI_STATUS s, const char *fmt, ...) { va_list ap; printf("panic: "); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("\n"); BS->Exit(IH, s, 0, NULL); } void putchar(int c) { CHAR16 buf[2]; if (c == '\n') { buf[0] = '\r'; buf[1] = 0; ST->ConOut->OutputString(ST->ConOut, buf); } buf[0] = c; buf[1] = 0; ST->ConOut->OutputString(ST->ConOut, buf); }