Index: head/sys/mips/atheros/ar531x/ar5315_machdep.c =================================================================== --- head/sys/mips/atheros/ar531x/ar5315_machdep.c (revision 348216) +++ head/sys/mips/atheros/ar531x/ar5315_machdep.c (revision 348217) @@ -1,319 +1,323 @@ /*- * Copyright (c) 2016, Hiroki Mori * Copyright (c) 2009 Oleksandr Tymoshenko * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_ddb.h" #include "opt_ar531x.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern char edata[], end[]; uint32_t ar711_base_mac[ETHER_ADDR_LEN]; /* 4KB static data aread to keep a copy of the bootload env until the dynamic kenv is setup */ char boot1_env[4096]; void platform_cpu_init() { /* Nothing special */ } void platform_reset(void) { ar531x_device_reset(); /* Wait for reset */ while(1) ; } /* * Obtain the MAC address via the Redboot environment. */ static void ar5315_redboot_get_macaddr(void) { char *var; int count = 0; /* * "ethaddr" is passed via envp on RedBoot platforms * "kmac" is passed via argv on RouterBOOT platforms */ if ((var = kern_getenv("ethaddr")) != NULL || (var = kern_getenv("kmac")) != NULL) { count = sscanf(var, "%x%*c%x%*c%x%*c%x%*c%x%*c%x", &ar711_base_mac[0], &ar711_base_mac[1], &ar711_base_mac[2], &ar711_base_mac[3], &ar711_base_mac[4], &ar711_base_mac[5]); if (count < 6) memset(ar711_base_mac, 0, sizeof(ar711_base_mac)); freeenv(var); } } #if defined(SOC_VENDOR) || defined(SOC_MODEL) || defined(SOC_REV) static SYSCTL_NODE(_hw, OID_AUTO, soc, CTLFLAG_RD, 0, "System on Chip information"); #endif #if defined(SOC_VENDOR) static char hw_soc_vendor[] = SOC_VENDOR; SYSCTL_STRING(_hw_soc, OID_AUTO, vendor, CTLFLAG_RD, hw_soc_vendor, 0, "SoC vendor"); #endif #if defined(SOC_MODEL) static char hw_soc_model[] = SOC_MODEL; SYSCTL_STRING(_hw_soc, OID_AUTO, model, CTLFLAG_RD, hw_soc_model, 0, "SoC model"); #endif #if defined(SOC_REV) static char hw_soc_revision[] = SOC_REV; SYSCTL_STRING(_hw_soc, OID_AUTO, revision, CTLFLAG_RD, hw_soc_revision, 0, "SoC revision"); #endif #if defined(DEVICE_VENDOR) || defined(DEVICE_MODEL) || defined(DEVICE_REV) static SYSCTL_NODE(_hw, OID_AUTO, device, CTLFLAG_RD, 0, "Board information"); #endif #if defined(DEVICE_VENDOR) static char hw_device_vendor[] = DEVICE_VENDOR; SYSCTL_STRING(_hw_device, OID_AUTO, vendor, CTLFLAG_RD, hw_device_vendor, 0, "Board vendor"); #endif #if defined(DEVICE_MODEL) static char hw_device_model[] = DEVICE_MODEL; SYSCTL_STRING(_hw_device, OID_AUTO, model, CTLFLAG_RD, hw_device_model, 0, "Board model"); #endif #if defined(DEVICE_REV) static char hw_device_revision[] = DEVICE_REV; SYSCTL_STRING(_hw_device, OID_AUTO, revision, CTLFLAG_RD, hw_device_revision, 0, "Board revision"); #endif +extern char cpu_model[]; + void platform_start(__register_t a0 __unused, __register_t a1 __unused, __register_t a2 __unused, __register_t a3 __unused) { uint64_t platform_counter_freq; int argc = 0, i; char **argv = NULL; #ifndef AR531X_ENV_UBOOT char **envp = NULL; #endif vm_offset_t kernend; /* * clear the BSS and SBSS segments, this should be first call in * the function */ kernend = (vm_offset_t)&end; memset(&edata, 0, kernend - (vm_offset_t)(&edata)); mips_postboot_fixup(); /* Initialize pcpu stuff */ mips_pcpu0_init(); /* * Until some more sensible abstractions for uboot/redboot * environment handling, we have to make this a compile-time * hack. The existing code handles the uboot environment * very incorrectly so we should just ignore initialising * the relevant pointers. */ #ifndef AR531X_ENV_UBOOT argc = a0; argv = (char**)a1; envp = (char**)a2; #endif /* * Protect ourselves from garbage in registers */ if (MIPS_IS_VALID_PTR(envp)) { for (i = 0; envp[i]; i += 2) { if (strcmp(envp[i], "memsize") == 0) realmem = btoc(strtoul(envp[i+1], NULL, 16)); } } ar5315_detect_sys_type(); // RedBoot SDRAM Detect is missing // ar531x_detect_mem_size(); /* * Just wild guess. RedBoot let us down and didn't reported * memory size */ if (realmem == 0) realmem = btoc(16*1024*1024); /* * Allow build-time override in case Redboot lies * or in other situations (eg where there's u-boot) * where there isn't (yet) a convienent method of * being told how much RAM is available. * * This happens on at least the Ubiquiti LS-SR71A * board, where redboot says there's 16mb of RAM * but in fact there's 32mb. */ #if defined(AR531X_REALMEM) realmem = btoc(AR531X_REALMEM); #endif /* phys_avail regions are in bytes */ phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end); phys_avail[1] = ctob(realmem); dump_avail[0] = phys_avail[0]; dump_avail[1] = phys_avail[1] - phys_avail[0]; physmem = realmem; /* * ns8250 uart code uses DELAY so ticker should be inititalized * before cninit. And tick_init_params refers to hz, so * init_param1 * should be called first. */ init_param1(); boothowto |= (RB_SERIAL | RB_MULTIPLE); /* Use multiple consoles */ // boothowto |= RB_VERBOSE; // boothowto |= (RB_SINGLE); /* Detect the system type - this is needed for subsequent chipset-specific calls */ ar531x_device_soc_init(); ar531x_detect_sys_frequency(); platform_counter_freq = ar531x_cpu_freq(); mips_timer_init_params(platform_counter_freq, 1); cninit(); init_static_kenv(boot1_env, sizeof(boot1_env)); printf("CPU platform: %s\n", ar5315_get_system_type()); printf("CPU Frequency=%d MHz\n", ar531x_cpu_freq() / 1000000); printf("CPU DDR Frequency=%d MHz\n", ar531x_ddr_freq() / 1000000); printf("CPU AHB Frequency=%d MHz\n", ar531x_ahb_freq() / 1000000); printf("platform frequency: %lld\n", platform_counter_freq); printf("arguments: \n"); printf(" a0 = %08x\n", a0); printf(" a1 = %08x\n", a1); printf(" a2 = %08x\n", a2); printf(" a3 = %08x\n", a3); + + strcpy(cpu_model, ar5315_get_system_type()); /* * XXX this code is very redboot specific. */ printf("Cmd line:"); if (MIPS_IS_VALID_PTR(argv)) { for (i = 0; i < argc; i++) { printf(" %s", argv[i]); boothowto |= boot_parse_arg(argv[i]); } } else printf ("argv is invalid"); printf("\n"); printf("Environment:\n"); #if 0 if (MIPS_IS_VALID_PTR(envp)) { if (envp[0] && strchr(envp[0], '=') ) { char *env_val; // for (i = 0; envp[i]; i++) { env_val = strchr(envp[i], '='); /* Not sure if we correct to change data, but env in RAM */ *(env_val++) = '\0'; printf("= %s = %s\n", envp[i], env_val); kern_setenv(envp[i], env_val); } } else { for (i = 0; envp[i]; i+=2) { printf(" %s = %s\n", envp[i], envp[i+1]); kern_setenv(envp[i], envp[i+1]); } } } else printf ("envp is invalid\n"); #else printf ("envp skiped\n"); #endif /* Redboot if_are MAC address is in the environment */ ar5315_redboot_get_macaddr(); init_param2(physmem); mips_cpu_init(); pmap_bootstrap(); mips_proc0_init(); mutex_init(); ar531x_device_start(); kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif } Index: head/sys/mips/mips/machdep.c =================================================================== --- head/sys/mips/mips/machdep.c (revision 348216) +++ head/sys/mips/mips/machdep.c (revision 348217) @@ -1,577 +1,579 @@ /* $OpenBSD: machdep.c,v 1.33 1998/09/15 10:58:54 pefo Exp $ */ /* tracked to 1.38 */ /*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 1988 University of Utah. * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department, The Mach Operating System project at * Carnegie-Mellon University and Ralph Campbell. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 8.3 (Berkeley) 1/12/94 * Id: machdep.c,v 1.33 1998/09/15 10:58:54 pefo Exp * JNPR: machdep.c,v 1.11.2.3 2007/08/29 12:24:49 */ #include __FBSDID("$FreeBSD$"); #include "opt_ddb.h" #include "opt_md.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #include #include #endif #include #include #define BOOTINFO_DEBUG 0 char machine[] = "mips"; SYSCTL_STRING(_hw, HW_MACHINE, machine, CTLFLAG_RD, machine, 0, "Machine class"); char cpu_model[80]; SYSCTL_STRING(_hw, HW_MODEL, model, CTLFLAG_RD, cpu_model, 0, "Machine model"); char cpu_board[80]; SYSCTL_STRING(_hw, OID_AUTO, board, CTLFLAG_RD, cpu_board, 0, "Machine board"); int cold = 1; long realmem = 0; long Maxmem = 0; int cpu_clock = MIPS_DEFAULT_HZ; SYSCTL_INT(_hw, OID_AUTO, clockrate, CTLFLAG_RD, &cpu_clock, 0, "CPU instruction clock rate"); int clocks_running = 0; vm_offset_t kstack0; /* * Each entry in the pcpu_space[] array is laid out in the following manner: * struct pcpu for cpu 'n' pcpu_space[n] * boot stack for cpu 'n' pcpu_space[n] + PAGE_SIZE * 2 - CALLFRAME_SIZ * * Note that the boot stack grows downwards and we assume that we never * use enough stack space to trample over the 'struct pcpu' that is at * the beginning of the array. * * The array is aligned on a (PAGE_SIZE * 2) boundary so that the 'struct pcpu' * is always in the even page frame of the wired TLB entry on SMP kernels. * * The array is in the .data section so that the stack does not get zeroed out * when the .bss section is zeroed. */ char pcpu_space[MAXCPU][PAGE_SIZE * 2] \ __aligned(PAGE_SIZE * 2) __section(".data"); struct pcpu *pcpup = (struct pcpu *)pcpu_space; vm_paddr_t phys_avail[PHYS_AVAIL_ENTRIES + 2]; vm_paddr_t physmem_desc[PHYS_AVAIL_ENTRIES + 2]; vm_paddr_t dump_avail[PHYS_AVAIL_ENTRIES + 2]; #ifdef UNIMPLEMENTED struct platform platform; #endif static void cpu_startup(void *); SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); struct kva_md_info kmi; int cpucfg; /* Value of processor config register */ int num_tlbentries = 64; /* Size of the CPU tlb */ int cputype; extern char MipsException[], MipsExceptionEnd[]; /* TLB miss handler address and end */ extern char MipsTLBMiss[], MipsTLBMissEnd[]; /* Cache error handler */ extern char MipsCache[], MipsCacheEnd[]; /* MIPS wait skip region */ extern char MipsWaitStart[], MipsWaitEnd[]; extern char edata[], end[]; u_int32_t bootdev; struct bootinfo bootinfo; /* * First kseg0 address available for use. By default it's equal to &end. * But in some cases there might be additional data placed right after * _end by loader or ELF trampoline. */ vm_offset_t kernel_kseg0_end = (vm_offset_t)&end; static void cpu_startup(void *dummy) { if (boothowto & RB_VERBOSE) bootverbose++; + printf("CPU model: %s\n", cpu_model); + printf("real memory = %ju (%juK bytes)\n", ptoa((uintmax_t)realmem), ptoa((uintmax_t)realmem) / 1024); /* * Display any holes after the first chunk of extended memory. */ if (bootverbose) { int indx; printf("Physical memory chunk(s):\n"); for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { vm_paddr_t size1 = phys_avail[indx + 1] - phys_avail[indx]; printf("0x%08jx - 0x%08jx, %ju bytes (%ju pages)\n", (uintmax_t)phys_avail[indx], (uintmax_t)phys_avail[indx + 1] - 1, (uintmax_t)size1, (uintmax_t)size1 / PAGE_SIZE); } } vm_ksubmap_init(&kmi); printf("avail memory = %ju (%juMB)\n", ptoa((uintmax_t)vm_free_count()), ptoa((uintmax_t)vm_free_count()) / 1048576); cpu_init_interrupts(); /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); vm_pager_bufferinit(); } /* * Shutdown the CPU as much as possible */ void cpu_reset(void) { platform_reset(); } /* * Flush the D-cache for non-DMA I/O so that the I-cache can * be made coherent later. */ void cpu_flush_dcache(void *ptr, size_t len) { /* TBD */ } /* Get current clock frequency for the given cpu id. */ int cpu_est_clockrate(int cpu_id, uint64_t *rate) { return (ENXIO); } /* * Shutdown the CPU as much as possible */ void cpu_halt(void) { for (;;) ; } SYSCTL_STRUCT(_machdep, OID_AUTO, bootinfo, CTLFLAG_RD, &bootinfo, bootinfo, "Bootinfo struct: kernel filename, BIOS harddisk geometry, etc"); /* * Initialize per cpu data structures, include curthread. */ void mips_pcpu0_init() { /* Initialize pcpu info of cpu-zero */ pcpu_init(PCPU_ADDR(0), 0, sizeof(struct pcpu)); PCPU_SET(curthread, &thread0); } /* * Initialize mips and configure to run kernel */ void mips_proc0_init(void) { #ifdef SMP if (platform_processor_id() != 0) panic("BSP must be processor number 0"); #endif proc_linkup0(&proc0, &thread0); KASSERT((kstack0 & PAGE_MASK) == 0, ("kstack0 is not aligned on a page boundary: 0x%0lx", (long)kstack0)); thread0.td_kstack = kstack0; thread0.td_kstack_pages = KSTACK_PAGES; /* * Do not use cpu_thread_alloc to initialize these fields * thread0 is the only thread that has kstack located in KSEG0 * while cpu_thread_alloc handles kstack allocated in KSEG2. */ thread0.td_pcb = (struct pcb *)(thread0.td_kstack + thread0.td_kstack_pages * PAGE_SIZE) - 1; thread0.td_frame = &thread0.td_pcb->pcb_regs; /* Steal memory for the dynamic per-cpu area. */ dpcpu_init((void *)pmap_steal_memory(DPCPU_SIZE), 0); PCPU_SET(curpcb, thread0.td_pcb); /* * There is no need to initialize md_upte array for thread0 as it's * located in .bss section and should be explicitly zeroed during * kernel initialization. */ } void cpu_initclocks(void) { platform_initclocks(); cpu_initclocks_bsp(); } /* * Initialize the hardware exception vectors, and the jump table used to * call locore cache and TLB management functions, based on the kind * of CPU the kernel is running on. */ void mips_vector_init(void) { /* * Make sure that the Wait region logic is not been * changed */ if (MipsWaitEnd - MipsWaitStart != 16) panic("startup: MIPS wait region not correct"); /* * Copy down exception vector code. */ if (MipsTLBMissEnd - MipsTLBMiss > 0x80) panic("startup: UTLB code too large"); if (MipsCacheEnd - MipsCache > 0x80) panic("startup: Cache error code too large"); bcopy(MipsTLBMiss, (void *)MIPS_UTLB_MISS_EXC_VEC, MipsTLBMissEnd - MipsTLBMiss); /* * XXXRW: Why don't we install the XTLB handler for all 64-bit * architectures? */ #if defined(__mips_n64) || defined(CPU_RMI) || defined(CPU_NLM) || defined(CPU_BERI) /* Fake, but sufficient, for the 32-bit with 64-bit hardware addresses */ bcopy(MipsTLBMiss, (void *)MIPS_XTLB_MISS_EXC_VEC, MipsTLBMissEnd - MipsTLBMiss); #endif bcopy(MipsException, (void *)MIPS_GEN_EXC_VEC, MipsExceptionEnd - MipsException); bcopy(MipsCache, (void *)MIPS_CACHE_ERR_EXC_VEC, MipsCacheEnd - MipsCache); /* * Clear out the I and D caches. */ mips_icache_sync_all(); mips_dcache_wbinv_all(); /* * Mask all interrupts. Each interrupt will be enabled * when handler is installed for it */ set_intr_mask(0); /* Clear BEV in SR so we start handling our own exceptions */ mips_wr_status(mips_rd_status() & ~MIPS_SR_BEV); } /* * Fix kernel_kseg0_end address in case trampoline placed debug sympols * data there */ void mips_postboot_fixup(void) { /* * We store u_long sized objects into the reload area, so the array * must be so aligned. The standard allows any alignment for char data. */ _Alignas(_Alignof(u_long)) static char fake_preload[256]; caddr_t preload_ptr = (caddr_t)&fake_preload[0]; size_t size = 0; #define PRELOAD_PUSH_VALUE(type, value) do { \ *(type *)(preload_ptr + size) = (value); \ size += sizeof(type); \ } while (0); /* * Provide kernel module file information */ PRELOAD_PUSH_VALUE(uint32_t, MODINFO_NAME); PRELOAD_PUSH_VALUE(uint32_t, strlen("kernel") + 1); strcpy((char*)(preload_ptr + size), "kernel"); size += strlen("kernel") + 1; size = roundup(size, sizeof(u_long)); PRELOAD_PUSH_VALUE(uint32_t, MODINFO_TYPE); PRELOAD_PUSH_VALUE(uint32_t, strlen("elf kernel") + 1); strcpy((char*)(preload_ptr + size), "elf kernel"); size += strlen("elf kernel") + 1; size = roundup(size, sizeof(u_long)); PRELOAD_PUSH_VALUE(uint32_t, MODINFO_ADDR); PRELOAD_PUSH_VALUE(uint32_t, sizeof(vm_offset_t)); PRELOAD_PUSH_VALUE(vm_offset_t, KERNLOADADDR); size = roundup(size, sizeof(u_long)); PRELOAD_PUSH_VALUE(uint32_t, MODINFO_SIZE); PRELOAD_PUSH_VALUE(uint32_t, sizeof(size_t)); PRELOAD_PUSH_VALUE(size_t, (size_t)&end - KERNLOADADDR); size = roundup(size, sizeof(u_long)); /* End marker */ PRELOAD_PUSH_VALUE(uint32_t, 0); PRELOAD_PUSH_VALUE(uint32_t, 0); #undef PRELOAD_PUSH_VALUE KASSERT((size < sizeof(fake_preload)), ("fake preload size is more thenallocated")); preload_metadata = (void *)fake_preload; #ifdef DDB Elf_Size *trampoline_data = (Elf_Size*)kernel_kseg0_end; Elf_Size symtabsize = 0; vm_offset_t ksym_start; vm_offset_t ksym_end; if (trampoline_data[0] == SYMTAB_MAGIC) { symtabsize = trampoline_data[1]; kernel_kseg0_end += 2 * sizeof(Elf_Size); /* start of .symtab */ ksym_start = kernel_kseg0_end; kernel_kseg0_end += symtabsize; /* end of .strtab */ ksym_end = kernel_kseg0_end; db_fetch_ksymtab(ksym_start, ksym_end); } #endif } #ifdef SMP void mips_pcpu_tlb_init(struct pcpu *pcpu) { vm_paddr_t pa; pt_entry_t pte; /* * Map the pcpu structure at the virtual address 'pcpup'. * We use a wired tlb index to do this one-time mapping. */ pa = vtophys(pcpu); pte = PTE_D | PTE_V | PTE_G | PTE_C_CACHE; tlb_insert_wired(PCPU_TLB_ENTRY, (vm_offset_t)pcpup, TLBLO_PA_TO_PFN(pa) | pte, TLBLO_PA_TO_PFN(pa + PAGE_SIZE) | pte); } #endif /* * Initialise a struct pcpu. */ void cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) { pcpu->pc_next_asid = 1; pcpu->pc_asid_generation = 1; pcpu->pc_self = pcpu; #ifdef SMP if ((vm_offset_t)pcpup >= VM_MIN_KERNEL_ADDRESS && (vm_offset_t)pcpup <= VM_MAX_KERNEL_ADDRESS) { mips_pcpu_tlb_init(pcpu); } #endif } int fill_dbregs(struct thread *td, struct dbreg *dbregs) { /* No debug registers on mips */ return (ENOSYS); } int set_dbregs(struct thread *td, struct dbreg *dbregs) { /* No debug registers on mips */ return (ENOSYS); } void spinlock_enter(void) { struct thread *td; register_t intr; td = curthread; if (td->td_md.md_spinlock_count == 0) { intr = intr_disable(); td->td_md.md_spinlock_count = 1; td->td_md.md_saved_intr = intr; } else td->td_md.md_spinlock_count++; critical_enter(); } void spinlock_exit(void) { struct thread *td; register_t intr; td = curthread; critical_exit(); intr = td->td_md.md_saved_intr; td->td_md.md_spinlock_count--; if (td->td_md.md_spinlock_count == 0) intr_restore(intr); } /* * call platform specific code to halt (until next interrupt) for the idle loop */ void cpu_idle(int busy) { KASSERT((mips_rd_status() & MIPS_SR_INT_IE) != 0, ("interrupts disabled in idle process.")); KASSERT((mips_rd_status() & MIPS_INT_MASK) != 0, ("all interrupts masked in idle process.")); if (!busy) { critical_enter(); cpu_idleclock(); } mips_wait(); if (!busy) { cpu_activeclock(); critical_exit(); } } int cpu_idle_wakeup(int cpu) { return (0); } int is_cacheable_mem(vm_paddr_t pa) { int i; for (i = 0; physmem_desc[i + 1] != 0; i += 2) { if (pa >= physmem_desc[i] && pa < physmem_desc[i + 1]) return (1); } return (0); }