Index: stable/11/share/man/man4/Makefile =================================================================== --- stable/11/share/man/man4/Makefile (revision 346546) +++ stable/11/share/man/man4/Makefile (revision 346547) @@ -1,1015 +1,1016 @@ # @(#)Makefile 8.1 (Berkeley) 6/18/93 # $FreeBSD$ .include PACKAGE=runtime-manuals MAN= aac.4 \ aacraid.4 \ acpi.4 \ ${_acpi_asus.4} \ ${_acpi_asus_wmi.4} \ ${_acpi_dock.4} \ ${_acpi_fujitsu.4} \ ${_acpi_hp.4} \ ${_acpi_ibm.4} \ ${_acpi_panasonic.4} \ ${_acpi_rapidstart.4} \ ${_acpi_sony.4} \ acpi_thermal.4 \ ${_acpi_toshiba.4} \ acpi_video.4 \ ${_acpi_wmi.4} \ ada.4 \ adv.4 \ adw.4 \ ae.4 \ ${_aesni.4} \ age.4 \ agp.4 \ aha.4 \ ahb.4 \ ahc.4 \ ahci.4 \ ahd.4 \ ${_aibs.4} \ aio.4 \ alc.4 \ ale.4 \ alpm.4 \ altera_atse.4 \ altera_avgen.4 \ altera_jtag_uart.4 \ altera_sdcard.4 \ altq.4 \ amdpm.4 \ ${_amdsbwd.4} \ ${_amdsmb.4} \ ${_amdsmn.4} \ ${_amdtemp.4} \ ${_bxe.4} \ amr.4 \ an.4 \ ${_aout.4} \ ${_apic.4} \ arcmsr.4 \ ${_asmc.4} \ ata.4 \ ath.4 \ ath_ahb.4 \ ath_hal.4 \ ath_pci.4 \ atkbd.4 \ atkbdc.4 \ atp.4 \ ${_atf_test_case.4} \ ${_atrtc.4} \ ${_attimer.4} \ audit.4 \ auditpipe.4 \ aue.4 \ axe.4 \ axge.4 \ bce.4 \ bcma.4 \ bfe.4 \ bge.4 \ ${_bhyve.4} \ bhnd.4 \ bhndb.4 \ bktr.4 \ blackhole.4 \ bnxt.4 \ bpf.4 \ bridge.4 \ bt.4 \ bwi.4 \ bwn.4 \ ${_bytgpio.4} \ ${_chvgpio.4} \ capsicum.4 \ cardbus.4 \ carp.4 \ cas.4 \ cc_cdg.4 \ cc_chd.4 \ cc_cubic.4 \ cc_dctcp.4 \ cc_hd.4 \ cc_htcp.4 \ cc_newreno.4 \ cc_vegas.4 \ ${_ccd.4} \ ccr.4 \ cd.4 \ cdce.4 \ cfi.4 \ cfumass.4 \ ch.4 \ chromebook_platform.4 \ ciss.4 \ cloudabi.4 \ cm.4 \ cmx.4 \ ${_coretemp.4} \ ${_cpuctl.4} \ cpufreq.4 \ crypto.4 \ ctl.4 \ cue.4 \ cxgb.4 \ cxgbe.4 \ cxgbev.4 \ cy.4 \ cyapa.4 \ da.4 \ dc.4 \ dcons.4 \ dcons_crom.4 \ ddb.4 \ de.4 \ devctl.4 \ digi.4 \ disc.4 \ divert.4 \ ${_dpms.4} \ dpt.4 \ ds1307.4 \ ds3231.4 \ ${_dtrace_io.4} \ ${_dtrace_ip.4} \ ${_dtrace_proc.4} \ ${_dtrace_sched.4} \ ${_dtrace_tcp.4} \ ${_dtrace_udp.4} \ dummynet.4 \ ed.4 \ edsc.4 \ ehci.4 \ em.4 \ en.4 \ ena.4 \ enc.4 \ epair.4 \ esp.4 \ est.4 \ et.4 \ etherswitch.4 \ eventtimers.4 \ exca.4 \ fatm.4 \ fd.4 \ fdc.4 \ fdt.4 \ fdt_pinctrl.4 \ fdtbus.4 \ ffclock.4 \ filemon.4 \ firewire.4 \ fpa.4 \ full.4 \ fwe.4 \ fwip.4 \ fwohci.4 \ fxp.4 \ gbde.4 \ gdb.4 \ gem.4 \ geom.4 \ geom_fox.4 \ geom_linux_lvm.4 \ geom_map.4 \ geom_uzip.4 \ gif.4 \ gpio.4 \ gpioiic.4 \ gpioled.4 \ gre.4 \ h_ertt.4 \ hatm.4 \ hifn.4 \ hme.4 \ hpet.4 \ ${_hpt27xx.4} \ ${_hptiop.4} \ ${_hptmv.4} \ ${_hptnr.4} \ ${_hptrr.4} \ ${_hv_kvp.4} \ ${_hv_netvsc.4} \ ${_hv_storvsc.4} \ ${_hv_utils.4} \ ${_hv_vmbus.4} \ hv_vss.4 \ hwpmc.4 \ ichsmb.4 \ ${_ichwd.4} \ icmp.4 \ icmp6.4 \ ida.4 \ if_ipsec.4 \ ifmib.4 \ ig4.4 \ igb.4 \ igmp.4 \ iic.4 \ iicbb.4 \ iicbus.4 \ iicsmb.4 \ iir.4 \ ${_imcsmb.4} \ inet.4 \ inet6.4 \ intpm.4 \ intro.4 \ ${_io.4} \ ${_ioat.4} \ ip.4 \ ip6.4 \ ipfirewall.4 \ ipheth.4 \ ${_ipmi.4} \ ips.4 \ ipsec.4 \ ipw.4 \ ipwfw.4 \ isci.4 \ isl.4 \ ismt.4 \ isp.4 \ ispfw.4 \ iwi.4 \ iwifw.4 \ iwm.4 \ iwmfw.4 \ iwn.4 \ iwnfw.4 \ ixgb.4 \ ixgbe.4 \ ixl.4 \ ixlv.4 \ jedec_dimm.4 \ jedec_ts.4 \ jme.4 \ joy.4 \ kbdmux.4 \ keyboard.4 \ kld.4 \ ksyms.4 \ ktr.4 \ kue.4 \ lagg.4 \ le.4 \ led.4 \ lge.4 \ ${_linux.4} \ ${_liquidio.4} \ lm75.4 \ lmc.4 \ lo.4 \ lp.4 \ lpbb.4 \ lpt.4 \ mac.4 \ mac_biba.4 \ mac_bsdextended.4 \ mac_ifoff.4 \ mac_lomac.4 \ mac_mls.4 \ mac_none.4 \ mac_partition.4 \ mac_portacl.4 \ mac_seeotheruids.4 \ mac_stub.4 \ mac_test.4 \ malo.4 \ mcd.4 \ md.4 \ mdio.4 \ me.4 \ mem.4 \ meteor.4 \ mfi.4 \ miibus.4 \ mk48txx.4 \ mld.4 \ mlx.4 \ mlx4en.4 \ mlx5en.4 \ mly.4 \ mmc.4 \ mmcsd.4 \ mn.4 \ mod_cc.4 \ mos.4 \ mouse.4 \ mpr.4 \ mps.4 \ mpt.4 \ mrsas.4 \ msk.4 \ mtio.4 \ multicast.4 \ mvs.4 \ mwl.4 \ mwlfw.4 \ mxge.4 \ my.4 \ nand.4 \ nandsim.4 \ natm.4 \ natmip.4 \ ncr.4 \ ncv.4 \ ${_ndis.4} \ net80211.4 \ netfpga10g_nf10bmac.4 \ netgraph.4 \ netintro.4 \ netmap.4 \ ${_nfe.4} \ ${_nfsmb.4} \ ng_async.4 \ ng_atm.4 \ ngatmbase.4 \ ng_atmllc.4 \ ng_bpf.4 \ ng_bridge.4 \ ng_bt3c.4 \ ng_btsocket.4 \ ng_car.4 \ ng_ccatm.4 \ ng_cisco.4 \ ng_deflate.4 \ ng_device.4 \ nge.4 \ ng_echo.4 \ ng_eiface.4 \ ng_etf.4 \ ng_ether.4 \ ng_ether_echo.4 \ ng_frame_relay.4 \ ng_gif.4 \ ng_gif_demux.4 \ ng_h4.4 \ ng_hci.4 \ ng_hole.4 \ ng_hub.4 \ ng_iface.4 \ ng_ipfw.4 \ ng_ip_input.4 \ ng_ksocket.4 \ ng_l2cap.4 \ ng_l2tp.4 \ ng_lmi.4 \ ng_mppc.4 \ ng_nat.4 \ ng_netflow.4 \ ng_one2many.4 \ ng_patch.4 \ ng_ppp.4 \ ng_pppoe.4 \ ng_pptpgre.4 \ ng_pred1.4 \ ng_rfc1490.4 \ ng_socket.4 \ ng_source.4 \ ng_split.4 \ ng_sppp.4 \ ng_sscfu.4 \ ng_sscop.4 \ ng_tag.4 \ ng_tcpmss.4 \ ng_tee.4 \ ng_tty.4 \ ng_ubt.4 \ ng_UI.4 \ ng_uni.4 \ ng_vjc.4 \ ng_vlan.4 \ nmdm.4 \ nsp.4 \ ${_ntb.4} \ ${_ntb_hw_intel.4} \ ${_ntb_hw_plx.4} \ ${_ntb_transport.4} \ ${_if_ntb.4} \ null.4 \ numa.4 \ ${_nvd.4} \ ${_nvme.4} \ ${_nvram.4} \ ${_nvram2env.4} \ ${_nxge.4} \ oce.4 \ ocs_fc.4\ ohci.4 \ orm.4 \ ow.4 \ ow_temp.4 \ owc.4 \ ${_padlock.4} \ pass.4 \ patm.4 \ pccard.4 \ pccbb.4 \ pcf.4 \ pci.4 \ pcib.4 \ pcic.4 \ pcm.4 \ pcn.4 \ ${_pf.4} \ ${_pflog.4} \ ${_pfsync.4} \ pim.4 \ pms.4 \ polling.4 \ ppbus.4 \ ppc.4 \ ppi.4 \ procdesc.4 \ proto.4 \ psm.4 \ pst.4 \ pt.4 \ pts.4 \ pty.4 \ puc.4 \ ${_qlxge.4} \ ${_qlxgb.4} \ ${_qlxgbe.4} \ ${_qlnxe.4} \ ral.4 \ random.4 \ rc.4 \ rctl.4 \ re.4 \ rgephy.4 \ rights.4 \ rl.4 \ rndtest.4 \ route.4 \ rp.4 \ rtwn.4 \ rtwnfw.4 \ rue.4 \ rum.4 \ run.4 \ runfw.4 \ sa.4 \ safe.4 \ sbp.4 \ sbp_targ.4 \ scc.4 \ scd.4 \ sched_4bsd.4 \ sched_ule.4 \ screen.4 \ scsi.4 \ sctp.4 \ sdhci.4 \ sem.4 \ send.4 \ ses.4 \ sf.4 \ ${_sfxge.4} \ sge.4 \ si.4 \ siba.4 \ siftr.4 \ siis.4 \ simplebus.4 \ sio.4 \ sis.4 \ sk.4 \ ${_smartpqi.4} \ smb.4 \ smbus.4 \ smp.4 \ smsc.4 \ sn.4 \ snd_ad1816.4 \ snd_als4000.4 \ snd_atiixp.4 \ snd_cmi.4 \ snd_cs4281.4 \ snd_csa.4 \ snd_ds1.4 \ snd_emu10k1.4 \ snd_emu10kx.4 \ snd_envy24.4 \ snd_envy24ht.4 \ snd_es137x.4 \ snd_ess.4 \ snd_fm801.4 \ snd_gusc.4 \ snd_hda.4 \ snd_hdspe.4 \ snd_ich.4 \ snd_maestro3.4 \ snd_maestro.4 \ snd_mss.4 \ snd_neomagic.4 \ snd_sbc.4 \ snd_solo.4 \ snd_spicds.4 \ snd_t4dwave.4 \ snd_uaudio.4 \ snd_via8233.4 \ snd_via82c686.4 \ snd_vibes.4 \ snp.4 \ spic.4 \ + spigen.4 \ ${_spkr.4} \ splash.4 \ sppp.4 \ ste.4 \ stf.4 \ stg.4 \ stge.4 \ sym.4 \ syncache.4 \ syncer.4 \ syscons.4 \ sysmouse.4 \ tap.4 \ targ.4 \ tcp.4 \ tdfx.4 \ terasic_mtl.4 \ termios.4 \ textdump.4 \ ti.4 \ timecounters.4 \ tl.4 \ ${_tpm.4} \ trm.4 \ tty.4 \ tun.4 \ twa.4 \ twe.4 \ tws.4 \ tx.4 \ txp.4 \ udp.4 \ udplite.4 \ ure.4 \ vale.4 \ vga.4 \ vge.4 \ viapm.4 \ ${_viawd.4} \ ${_virtio.4} \ ${_virtio_balloon.4} \ ${_virtio_blk.4} \ ${_virtio_console.4} \ ${_virtio_random.4} \ ${_virtio_scsi.4} \ vkbd.4 \ vlan.4 \ vxlan.4 \ ${_vmx.4} \ vpo.4 \ vr.4 \ vt.4 \ vte.4 \ ${_vtnet.4} \ ${_vxge.4} \ watchdog.4 \ wb.4 \ ${_wbwd.4} \ wi.4 \ witness.4 \ wlan.4 \ wlan_acl.4 \ wlan_amrr.4 \ wlan_ccmp.4 \ wlan_tkip.4 \ wlan_wep.4 \ wlan_xauth.4 \ wmt.4 \ ${_wpi.4} \ wsp.4 \ xe.4 \ ${_xen.4} \ xhci.4 \ xl.4 \ ${_xnb.4} \ xpt.4 \ zero.4 \ zyd.4 MLINKS= ae.4 if_ae.4 MLINKS+=age.4 if_age.4 MLINKS+=agp.4 agpgart.4 MLINKS+=alc.4 if_alc.4 MLINKS+=ale.4 if_ale.4 MLINKS+=altera_atse.4 atse.4 MLINKS+=altera_sdcard.4 altera_sdcardc.4 MLINKS+=altq.4 ALTQ.4 MLINKS+=ath.4 if_ath.4 MLINKS+=ath_pci.4 if_ath_pci.4 MLINKS+=an.4 if_an.4 MLINKS+=aue.4 if_aue.4 MLINKS+=axe.4 if_axe.4 MLINKS+=bce.4 if_bce.4 MLINKS+=bfe.4 if_bfe.4 MLINKS+=bge.4 if_bge.4 MLINKS+=bktr.4 brooktree.4 MLINKS+=bnxt.4 if_bnxt.4 MLINKS+=bridge.4 if_bridge.4 MLINKS+=bwi.4 if_bwi.4 MLINKS+=bwn.4 if_bwn.4 MLINKS+=${_bxe.4} ${_if_bxe.4} MLINKS+=cas.4 if_cas.4 MLINKS+=cdce.4 if_cdce.4 MLINKS+=cfi.4 cfid.4 MLINKS+=cloudabi.4 cloudabi32.4 \ cloudabi.4 cloudabi64.4 MLINKS+=crypto.4 cryptodev.4 MLINKS+=cue.4 if_cue.4 MLINKS+=cxgb.4 if_cxgb.4 MLINKS+=cxgbe.4 if_cxgbe.4 \ cxgbe.4 vcxgbe.4 \ cxgbe.4 if_vcxgbe.4 \ cxgbe.4 cxl.4 \ cxgbe.4 if_cxl.4 \ cxgbe.4 vcxl.4 \ cxgbe.4 if_vcxl.4 \ cxgbe.4 cc.4 \ cxgbe.4 if_cc.4 \ cxgbe.4 vcc.4 \ cxgbe.4 if_vcc.4 MLINKS+=cxgbev.4 if_cxgbev.4 \ cxgbev.4 cxlv.4 \ cxgbev.4 if_cxlv.4 \ cxgbev.4 ccv.4 \ cxgbev.4 if_ccv.4 MLINKS+=dc.4 if_dc.4 MLINKS+=de.4 if_de.4 MLINKS+=disc.4 if_disc.4 MLINKS+=ed.4 if_ed.4 MLINKS+=edsc.4 if_edsc.4 MLINKS+=em.4 if_em.4 MLINKS+=en.4 if_en.4 MLINKS+=enc.4 if_enc.4 MLINKS+=epair.4 if_epair.4 MLINKS+=et.4 if_et.4 MLINKS+=fatm.4 if_fatm.4 MLINKS+=fd.4 stderr.4 \ fd.4 stdin.4 \ fd.4 stdout.4 MLINKS+=fdt.4 FDT.4 MLINKS+=firewire.4 ieee1394.4 MLINKS+=fpa.4 fea.4 MLINKS+=fwe.4 if_fwe.4 MLINKS+=fwip.4 if_fwip.4 MLINKS+=fxp.4 if_fxp.4 MLINKS+=gem.4 if_gem.4 MLINKS+=geom.4 GEOM.4 MLINKS+=gif.4 if_gif.4 MLINKS+=gpio.4 gpiobus.4 MLINKS+=gre.4 if_gre.4 MLINKS+=hatm.4 if_hatm.4 MLINKS+=hme.4 if_hme.4 MLINKS+=hpet.4 acpi_hpet.4 MLINKS+=${_hptrr.4} ${_rr232x.4} MLINKS+=${_attimer.4} ${_i8254.4} MLINKS+=igb.4 if_igb.4 MLINKS+=ip.4 rawip.4 MLINKS+=ipfirewall.4 ipaccounting.4 \ ipfirewall.4 ipacct.4 \ ipfirewall.4 ipfw.4 MLINKS+=ipheth.4 if_ipheth.4 MLINKS+=ipw.4 if_ipw.4 MLINKS+=iwi.4 if_iwi.4 MLINKS+=iwm.4 if_iwm.4 MLINKS+=iwn.4 if_iwn.4 MLINKS+=ixgb.4 if_ixgb.4 MLINKS+=ixgbe.4 ix.4 MLINKS+=ixgbe.4 if_ix.4 MLINKS+=ixgbe.4 if_ixgbe.4 MLINKS+=ixl.4 if_ixl.4 MLINKS+=ixlv.4 if_ixlv.4 MLINKS+=jme.4 if_jme.4 MLINKS+=kue.4 if_kue.4 MLINKS+=lagg.4 trunk.4 MLINKS+=lagg.4 if_lagg.4 MLINKS+=le.4 if_le.4 MLINKS+=lge.4 if_lge.4 MLINKS+=lmc.4 if_lmc.4 MLINKS+=lo.4 loop.4 MLINKS+=lp.4 plip.4 MLINKS+=malo.4 if_malo.4 MLINKS+=md.4 vn.4 MLINKS+=mem.4 kmem.4 MLINKS+=mfi.4 mfi_linux.4 \ mfi.4 mfip.4 MLINKS+=mlx5en.4 mce.4 MLINKS+=mn.4 if_mn.4 MLINKS+=mos.4 if_mos.4 MLINKS+=msk.4 if_msk.4 MLINKS+=mwl.4 if_mwl.4 MLINKS+=mxge.4 if_mxge.4 MLINKS+=my.4 if_my.4 MLINKS+=${_ndis.4} ${_if_ndis.4} MLINKS+=netfpga10g_nf10bmac.4 if_nf10bmac.4 MLINKS+=netintro.4 net.4 \ netintro.4 networking.4 MLINKS+=${_nfe.4} ${_if_nfe.4} MLINKS+=nge.4 if_nge.4 MLINKS+=${_nxge.4} ${_if_nxge.4} MLINKS+=ow.4 onewire.4 MLINKS+=patm.4 if_patm.4 MLINKS+=pccbb.4 cbb.4 MLINKS+=pcm.4 snd.4 \ pcm.4 sound.4 MLINKS+=pcn.4 if_pcn.4 MLINKS+=pms.4 pmspcv.4 MLINKS+=ral.4 if_ral.4 MLINKS+=re.4 if_re.4 MLINKS+=rl.4 if_rl.4 MLINKS+=rue.4 if_rue.4 MLINKS+=rum.4 if_rum.4 MLINKS+=run.4 if_run.4 MLINKS+=scsi.4 CAM.4 \ scsi.4 cam.4 \ scsi.4 scbus.4 \ scsi.4 SCSI.4 MLINKS+=sf.4 if_sf.4 MLINKS+=sge.4 if_sge.4 MLINKS+=sis.4 if_sis.4 MLINKS+=sk.4 if_sk.4 MLINKS+=smp.4 SMP.4 MLINKS+=smsc.4 if_smsc.4 MLINKS+=sn.4 if_sn.4 MLINKS+=snd_envy24.4 snd_ak452x.4 MLINKS+=snd_sbc.4 snd_sb16.4 \ snd_sbc.4 snd_sb8.4 MLINKS+=${_spkr.4} ${_speaker.4} MLINKS+=splash.4 screensaver.4 MLINKS+=ste.4 if_ste.4 MLINKS+=stf.4 if_stf.4 MLINKS+=stge.4 if_stge.4 MLINKS+=syncache.4 syncookies.4 MLINKS+=syscons.4 sc.4 MLINKS+=tap.4 if_tap.4 MLINKS+=tdfx.4 tdfx_linux.4 MLINKS+=ti.4 if_ti.4 MLINKS+=tl.4 if_tl.4 MLINKS+=tun.4 if_tun.4 MLINKS+=tx.4 if_tx.4 MLINKS+=txp.4 if_txp.4 MLINKS+=ure.4 if_ure.4 MLINKS+=vge.4 if_vge.4 MLINKS+=vlan.4 if_vlan.4 MLINKS+=vxlan.4 if_vxlan.4 MLINKS+=${_vmx.4} ${_if_vmx.4} MLINKS+=vpo.4 imm.4 MLINKS+=vr.4 if_vr.4 MLINKS+=vte.4 if_vte.4 MLINKS+=${_vtnet.4} ${_if_vtnet.4} MLINKS+=${_vxge.4} ${_if_vxge.4} MLINKS+=watchdog.4 SW_WATCHDOG.4 MLINKS+=wb.4 if_wb.4 MLINKS+=wi.4 if_wi.4 MLINKS+=${_wpi.4} ${_if_wpi.4} MLINKS+=xe.4 if_xe.4 MLINKS+=xl.4 if_xl.4 MLINKS+=zyd.4 if_zyd.4 .if ${MACHINE_CPUARCH} == "amd64" || ${MACHINE_CPUARCH} == "i386" _acpi_asus.4= acpi_asus.4 _acpi_asus_wmi.4= acpi_asus_wmi.4 _acpi_dock.4= acpi_dock.4 _acpi_fujitsu.4=acpi_fujitsu.4 _acpi_hp.4= acpi_hp.4 _acpi_ibm.4= acpi_ibm.4 _acpi_panasonic.4=acpi_panasonic.4 _acpi_rapidstart.4=acpi_rapidstart.4 _acpi_sony.4= acpi_sony.4 _acpi_toshiba.4=acpi_toshiba.4 _acpi_wmi.4= acpi_wmi.4 _aesni.4= aesni.4 _aout.4= aout.4 _apic.4= apic.4 _atrtc.4= atrtc.4 _attimer.4= attimer.4 _aibs.4= aibs.4 _amdsbwd.4= amdsbwd.4 _amdsmb.4= amdsmb.4 _amdsmn.4= amdsmn.4 _amdtemp.4= amdtemp.4 _asmc.4= asmc.4 _bxe.4= bxe.4 _bytgpio.4= bytgpio.4 _chvgpio.4= chvgpio.4 _coretemp.4= coretemp.4 _cpuctl.4= cpuctl.4 _dpms.4= dpms.4 _hpt27xx.4= hpt27xx.4 _hptiop.4= hptiop.4 _hptmv.4= hptmv.4 _hptnr.4= hptnr.4 _hptrr.4= hptrr.4 _hv_kvp.4= hv_kvp.4 _hv_netvsc.4= hv_netvsc.4 _hv_storvsc.4= hv_storvsc.4 _hv_utils.4= hv_utils.4 _hv_vmbus.4= hv_vmbus.4 _i8254.4= i8254.4 _ichwd.4= ichwd.4 _if_bxe.4= if_bxe.4 _if_ndis.4= if_ndis.4 _if_nfe.4= if_nfe.4 _if_nxge.4= if_nxge.4 _if_urtw.4= if_urtw.4 _if_vmx.4= if_vmx.4 _if_vtnet.4= if_vtnet.4 _if_vxge.4= if_vxge.4 _if_wpi.4= if_wpi.4 _imcsmb.4= imcsmb.4 _ipmi.4= ipmi.4 _io.4= io.4 _linux.4= linux.4 _liquidio.4= liquidio.4 _ndis.4= ndis.4 _nfe.4= nfe.4 _nfsmb.4= nfsmb.4 _nvd.4= nvd.4 _nvme.4= nvme.4 _nvram.4= nvram.4 _nxge.4= nxge.4 _virtio.4= virtio.4 _virtio_balloon.4=virtio_balloon.4 _virtio_blk.4= virtio_blk.4 _virtio_console.4=virtio_console.4 _virtio_random.4= virtio_random.4 _virtio_scsi.4= virtio_scsi.4 _vmx.4= vmx.4 _vtnet.4= vtnet.4 _vxge.4= vxge.4 _padlock.4= padlock.4 _rr232x.4= rr232x.4 _speaker.4= speaker.4 _spkr.4= spkr.4 _tpm.4= tpm.4 _urtw.4= urtw.4 _viawd.4= viawd.4 _wbwd.4= wbwd.4 _wpi.4= wpi.4 _xen.4= xen.4 _xnb.4= xnb.4 .endif .if ${MACHINE_CPUARCH} == "amd64" _if_ntb.4= if_ntb.4 _ioat.4= ioat.4 _ntb.4= ntb.4 _ntb_hw_intel.4= ntb_hw_intel.4 _ntb_hw_plx.4= ntb_hw_plx.4 _ntb_transport.4=ntb_transport.4 _qlxge.4= qlxge.4 _qlxgb.4= qlxgb.4 _qlxgbe.4= qlxgbe.4 _qlnxe.4= qlnxe.4 _sfxge.4= sfxge.4 _smartpqi.4= smartpqi.4 MLINKS+=qlxge.4 if_qlxge.4 MLINKS+=qlxgb.4 if_qlxgb.4 MLINKS+=qlxgbe.4 if_qlxgbe.4 MLINKS+=qlnxe.4 if_qlnxe.4 MLINKS+=sfxge.4 if_sfxge.4 .if ${MK_BHYVE} != "no" _bhyve.4= bhyve.4 .endif .endif .if ${MACHINE_CPUARCH} == "mips" _nvram2env.4= nvram2env.4 .endif .if exists(${.CURDIR}/man4.${MACHINE_CPUARCH}) SUBDIR= man4.${MACHINE_CPUARCH} .endif .if ${MK_BLUETOOTH} != "no" MAN+= ng_bluetooth.4 .endif .if ${MK_CCD} != "no" _ccd.4= ccd.4 .endif .if ${MK_CDDL} != "no" _dtrace_io.4= dtrace_io.4 _dtrace_ip.4= dtrace_ip.4 _dtrace_proc.4= dtrace_proc.4 _dtrace_sched.4= dtrace_sched.4 _dtrace_tcp.4= dtrace_tcp.4 _dtrace_udp.4= dtrace_udp.4 .endif .if ${MK_ISCSI} != "no" MAN+= cfiscsi.4 MAN+= iscsi.4 MAN+= iscsi_initiator.4 MAN+= iser.4 .endif .if ${MK_OFED} != "no" MAN+= mlx4ib.4 MAN+= mlx5ib.4 .endif .if ${MK_MLX5TOOL} != "no" MAN+= mlx5io.4 .endif .if ${MK_TESTS} != "no" ATF= ${.CURDIR}/../../../contrib/atf .PATH: ${ATF}/doc _atf_test_case.4= atf-test-case.4 .endif .if ${MK_PF} != "no" _pf.4= pf.4 _pflog.4= pflog.4 _pfsync.4= pfsync.4 .endif .if ${MK_USB} != "no" MAN+= \ otus.4 \ otusfw.4 \ rsu.4 \ rsufw.4 \ u3g.4 \ uark.4 \ uart.4 \ uath.4 \ ubsa.4 \ ubsec.4 \ ubser.4 \ ubtbcmfw.4 \ uchcom.4 \ ucom.4 \ ucycom.4 \ udav.4 \ udbp.4 \ udl.4 \ uep.4 \ ufm.4 \ ufoma.4 \ uftdi.4 \ ugen.4 \ ugold.4 \ uhci.4 \ uhid.4 \ uhso.4 \ uipaq.4 \ ukbd.4 \ uled.4 \ ulpt.4 \ umass.4 \ umcs.4 \ umct.4 \ umodem.4 \ umoscom.4 \ ums.4 \ unix.4 \ upgt.4 \ uplcom.4 \ ural.4 \ urio.4 \ urndis.4 \ ${_urtw.4} \ urtwn.4 \ urtwnfw.4 \ usb.4 \ usb_quirk.4 \ usb_template.4 \ usfs.4 \ uslcom.4 \ utopia.4 \ uvisor.4 \ uvscom.4 \ MLINKS+=otus.4 if_otus.4 MLINKS+=rsu.4 if_rsu.4 MLINKS+=u3g.4 u3gstub.4 MLINKS+=uath.4 if_uath.4 MLINKS+=udav.4 if_udav.4 MLINKS+=upgt.4 if_upgt.4 MLINKS+=ural.4 if_ural.4 MLINKS+=urndis.4 if_urndis.4 MLINKS+=${_urtw.4} ${_if_urtw.4} MLINKS+=urtwn.4 if_urtwn.4 .endif .include Index: stable/11/share/man/man4/man4.arm/imx_spi.4 =================================================================== --- stable/11/share/man/man4/man4.arm/imx_spi.4 (nonexistent) +++ stable/11/share/man/man4/man4.arm/imx_spi.4 (revision 346547) @@ -0,0 +1,90 @@ +.\" +.\" Copyright (c) 2018 Ian Lepore +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR +.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd July 9, 2018 +.Dt IMX_SPI 4 +.Os +.Sh NAME +.Nm imx_spi +.Nd device driver for the NXP i.MX family Serial Peripheral Interface (SPI) +.Sh SYNOPSIS +To compile this driver into the kernel, +place the following line in your +kernel configuration file: +.Bd -ragged -offset indent +.Cd "device imx_spi" +.Ed +.Pp +Alternatively, to load the driver as a +module at boot time, place the following line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +imx_spi_load="YES" +.Ed +.Sh DESCRIPTION +The +.Nm +driver provides support for the +.Sq ECSPI +(Enhanced Configurable SPI) hardware present on the NXP i.MX family +of processors. +While the ECSPI hardware supports both master and slave mode, +this driver currently operates only in master mode. +.Pp +Due to hardware quirks, the +.Nm +driver requires that all chip select pins be configured as GPIO pins. +Use the FDT property +.Sq cs-gpios +to specify which pins to use as chip selects. +You may use any GPIO pins, including the ones that the hardware would +normally use as SPI select pins; just configure them as GPIO in the +.Xr fdt_pinctrl 4 +data. +.Pp +.Sh SYSCTL VARIABLES +The following variables are available via +.Xr sysctl 8 , +and as +.Xr loader 8 +tunables: +.Bl -tag -width indent +.It Va dev.imx_spi.%d.debug +Output debugging info when non-zero. +A value of 1 displays information about bus transfers, +2 adds information about bus clock frequency and chip select activity, +and 3 adds information about interrupt handling. +.El +.Sh SEE ALSO +.Xr fdt 4 , +.Xr fdt_pinctrl 4 , +.Xr sysctl 8 +.Sh HISTORY +The +.Nm +driver first appeared in +.Fx 12.0 . Property changes on: stable/11/share/man/man4/man4.arm/imx_spi.4 ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: stable/11/sys/arm/freescale/imx/imx_spi.c =================================================================== --- stable/11/sys/arm/freescale/imx/imx_spi.c (revision 346546) +++ stable/11/sys/arm/freescale/imx/imx_spi.c (revision 346547) @@ -1,611 +1,612 @@ /*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2018 Ian Lepore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * Driver for imx Enhanced Configurable SPI; master-mode only. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "spibus_if.h" #define ECSPI_RXDATA 0x00 #define ECSPI_TXDATA 0x04 #define ECSPI_CTLREG 0x08 #define CTLREG_BLEN_SHIFT 20 #define CTLREG_BLEN_MASK 0x0fff #define CTLREG_CSEL_SHIFT 18 #define CTLREG_CSEL_MASK 0x03 #define CTLREG_DRCTL_SHIFT 16 #define CTLREG_DRCTL_MASK 0x03 #define CTLREG_PREDIV_SHIFT 12 #define CTLREG_PREDIV_MASK 0x0f #define CTLREG_POSTDIV_SHIFT 8 #define CTLREG_POSTDIV_MASK 0x0f #define CTLREG_CMODE_SHIFT 4 #define CTLREG_CMODE_MASK 0x0f #define CTLREG_CMODES_MASTER (CTLREG_CMODE_MASK << CTLREG_CMODE_SHIFT) #define CTLREG_SMC (1u << 3) #define CTLREG_XCH (1u << 2) #define CTLREG_HT (1u << 1) #define CTLREG_EN (1u << 0) #define ECSPI_CFGREG 0x0c #define CFGREG_HTLEN_SHIFT 24 #define CFGREG_SCLKCTL_SHIFT 20 #define CFGREG_DATACTL_SHIFT 16 #define CFGREG_SSPOL_SHIFT 12 #define CFGREG_SSCTL_SHIFT 8 #define CFGREG_SCLKPOL_SHIFT 4 #define CFGREG_SCLKPHA_SHIFT 0 #define CFGREG_MASK 0x0f /* all CFGREG fields are 4 bits */ #define ECSPI_INTREG 0x10 #define INTREG_TCEN (1u << 7) #define INTREG_ROEN (1u << 6) #define INTREG_RFEN (1u << 5) #define INTREG_RDREN (1u << 4) #define INTREG_RREN (1u << 3) #define INTREG_TFEN (1u << 2) #define INTREG_TDREN (1u << 1) #define INTREG_TEEN (1u << 0) #define ECSPI_DMAREG 0x14 #define DMA_RX_THRESH_SHIFT 16 #define DMA_RX_THRESH_MASK 0x3f #define DMA_TX_THRESH_SHIFT 0 #define DMA_TX_THRESH_MASK 0x3f #define ECSPI_STATREG 0x18 #define SREG_TC (1u << 7) #define SREG_RO (1u << 6) #define SREG_RF (1u << 5) #define SREG_RDR (1u << 4) #define SREG_RR (1u << 3) #define SREG_TF (1u << 2) #define SREG_TDR (1u << 1) #define SREG_TE (1u << 0) #define ECSPI_PERIODREG 0x1c #define ECSPI_TESTREG 0x20 #define CS_MAX 4 /* Max number of chip selects. */ #define CS_MASK 0x03 /* Mask flag bits out of chipsel. */ #define FIFO_SIZE 64 #define FIFO_RXTHRESH 32 #define FIFO_TXTHRESH 32 struct spi_softc { device_t dev; device_t spibus; struct mtx mtx; struct resource *memres; struct resource *intres; void *inthandle; gpio_pin_t cspins[CS_MAX]; u_int debug; u_int basefreq; uint32_t ctlreg; uint32_t intreg; uint32_t fifocnt; uint8_t *rxbuf; uint32_t rxidx; uint32_t rxlen; uint8_t *txbuf; uint32_t txidx; uint32_t txlen; }; static struct ofw_compat_data compat_data[] = { {"fsl,imx51-ecspi", true}, {"fsl,imx53-ecspi", true}, {"fsl,imx6dl-ecspi", true}, {"fsl,imx6q-ecspi", true}, {"fsl,imx6sx-ecspi", true}, {"fsl,imx6ul-ecspi", true}, {NULL, false} }; static inline uint32_t RD4(struct spi_softc *sc, bus_size_t offset) { return (bus_read_4(sc->memres, offset)); } static inline void WR4(struct spi_softc *sc, bus_size_t offset, uint32_t value) { bus_write_4(sc->memres, offset, value); } static u_int spi_calc_clockdiv(struct spi_softc *sc, u_int busfreq) { u_int post, pre; /* Returning 0 effectively sets both dividers to 1. */ if (sc->basefreq <= busfreq) return (0); /* * Brute-force this; all real-world bus speeds are going to be found on * the 1st or 2nd time through this loop. */ for (post = 0; post < 16; ++post) { pre = ((sc->basefreq >> post) / busfreq) - 1; if (pre < 16) break; } if (post == 16) { /* The lowest we can go is ~115 Hz. */ pre = 15; post = 15; } if (sc->debug >= 2) { device_printf(sc->dev, "base %u bus %u; pre %u, post %u; actual busfreq %u\n", sc->basefreq, busfreq, pre, post, (sc->basefreq / (pre + 1)) / (1 << post)); } return (pre << CTLREG_PREDIV_SHIFT) | (post << CTLREG_POSTDIV_SHIFT); } static void spi_set_chipsel(struct spi_softc *sc, u_int cs, bool active) { bool pinactive; /* * This is kinda crazy... the gpio pins for chipsel are defined as * active-high in the dts, but are supposed to be treated as active-low * by this driver. So to turn on chipsel we have to invert the value * passed to gpio_pin_set_active(). Then, to make it more fun, any * slave can say its chipsel is active-high, so if that option is * on, we have to invert the value again. */ pinactive = !active ^ (bool)(cs & SPIBUS_CS_HIGH); if (sc->debug >= 2) { device_printf(sc->dev, "chipsel %u changed to %u\n", (cs & ~SPIBUS_CS_HIGH), pinactive); } /* * Change the pin, then do a dummy read of its current state to ensure * that the state change reaches the hardware before proceeding. */ gpio_pin_set_active(sc->cspins[cs & ~SPIBUS_CS_HIGH], pinactive); gpio_pin_is_active(sc->cspins[cs & ~SPIBUS_CS_HIGH], &pinactive); } static void spi_hw_setup(struct spi_softc *sc, u_int cs, u_int mode, u_int freq) { uint32_t reg; /* * Set up control register, and write it first to bring the device out * of reset. */ sc->ctlreg = CTLREG_EN | CTLREG_CMODES_MASTER | CTLREG_SMC; sc->ctlreg |= spi_calc_clockdiv(sc, freq); sc->ctlreg |= 7 << CTLREG_BLEN_SHIFT; /* XXX byte at a time */ WR4(sc, ECSPI_CTLREG, sc->ctlreg); /* * Set up the config register. Note that we do all transfers with the * SPI hardware's chip-select set to zero. The actual chip select is * handled with a gpio pin. */ reg = 0; if (cs & SPIBUS_CS_HIGH) reg |= 1u << CFGREG_SSPOL_SHIFT; if (mode & SPIBUS_MODE_CPHA) reg |= 1u << CFGREG_SCLKPHA_SHIFT; if (mode & SPIBUS_MODE_CPOL) { reg |= 1u << CFGREG_SCLKPOL_SHIFT; reg |= 1u << CFGREG_SCLKCTL_SHIFT; } WR4(sc, ECSPI_CFGREG, reg); /* * Set up the rx/tx FIFO interrupt thresholds. */ reg = (FIFO_RXTHRESH << DMA_RX_THRESH_SHIFT); reg |= (FIFO_TXTHRESH << DMA_TX_THRESH_SHIFT); WR4(sc, ECSPI_DMAREG, reg); /* * Do a dummy read, to make sure the preceding writes reach the spi * hardware before we assert any gpio chip select. */ (void)RD4(sc, ECSPI_CFGREG); } static void spi_empty_rxfifo(struct spi_softc *sc) { while (sc->rxidx < sc->rxlen && (RD4(sc, ECSPI_STATREG) & SREG_RR)) { sc->rxbuf[sc->rxidx++] = (uint8_t)RD4(sc, ECSPI_RXDATA); --sc->fifocnt; } } static void spi_fill_txfifo(struct spi_softc *sc) { while (sc->txidx < sc->txlen && sc->fifocnt < FIFO_SIZE) { WR4(sc, ECSPI_TXDATA, sc->txbuf[sc->txidx++]); ++sc->fifocnt; } /* * If we're out of data, disable tx data ready (threshold) interrupts, * and enable tx fifo empty interrupts. */ if (sc->txidx == sc->txlen) sc->intreg = (sc->intreg & ~INTREG_TDREN) | INTREG_TEEN; } static void spi_intr(void *arg) { struct spi_softc *sc = arg; uint32_t intreg, status; mtx_lock(&sc->mtx); sc = arg; intreg = sc->intreg; status = RD4(sc, ECSPI_STATREG); WR4(sc, ECSPI_STATREG, status); /* Clear w1c bits. */ /* * If we get an overflow error, just signal that the transfer is done * and wakeup the waiting thread, which will see that txidx != txlen and * return an IO error to the caller. */ if (__predict_false(status & SREG_RO)) { if (sc->debug || bootverbose) { device_printf(sc->dev, "rxoverflow rxidx %u txidx %u\n", sc->rxidx, sc->txidx); } sc->intreg = 0; wakeup(sc); mtx_unlock(&sc->mtx); return; } if (status & SREG_RR) spi_empty_rxfifo(sc); if (status & SREG_TDR) spi_fill_txfifo(sc); /* * If we're out of bytes to send... * - If Transfer Complete is set (shift register is empty) and we've * received everything we expect, we're all done. * - Else if Tx Fifo Empty is set, we need to stop waiting for that and * switch to waiting for Transfer Complete (wait for shift register * to empty out), and also for Receive Ready (last of incoming data). */ if (sc->txidx == sc->txlen) { if ((status & SREG_TC) && sc->fifocnt == 0) { sc->intreg = 0; wakeup(sc); } else if (status & SREG_TE) { sc->intreg &= ~(sc->intreg & ~INTREG_TEEN); sc->intreg |= INTREG_TCEN | INTREG_RREN; } } /* * If interrupt flags changed, write the new flags to the hardware and * do a dummy readback to ensure the changes reach the hardware before * we exit the isr. */ if (sc->intreg != intreg) { WR4(sc, ECSPI_INTREG, sc->intreg); (void)RD4(sc, ECSPI_INTREG); } if (sc->debug >= 3) { device_printf(sc->dev, "spi_intr, sreg 0x%08x intreg was 0x%08x now 0x%08x\n", status, intreg, sc->intreg); } mtx_unlock(&sc->mtx); } static int spi_xfer_buf(struct spi_softc *sc, void *rxbuf, void *txbuf, uint32_t len) { int err; if (sc->debug >= 1) { device_printf(sc->dev, "spi_xfer_buf, rxbuf %p txbuf %p len %u\n", rxbuf, txbuf, len); } if (len == 0) return (0); sc->rxbuf = rxbuf; sc->rxlen = len; sc->rxidx = 0; sc->txbuf = txbuf; sc->txlen = len; sc->txidx = 0; sc->intreg = INTREG_RDREN | INTREG_TDREN; spi_fill_txfifo(sc); /* Enable interrupts last; spi_fill_txfifo() can change sc->intreg */ WR4(sc, ECSPI_INTREG, sc->intreg); err = 0; while (err == 0 && sc->intreg != 0) err = msleep(sc, &sc->mtx, 0, "imxspi", 10 * hz); if (sc->rxidx != sc->rxlen || sc->txidx != sc->txlen) err = EIO; return (err); } static int spi_transfer(device_t dev, device_t child, struct spi_command *cmd) { struct spi_softc *sc = device_get_softc(dev); uint32_t cs, mode, clock; int err; spibus_get_cs(child, &cs); spibus_get_clock(child, &clock); spibus_get_mode(child, &mode); if (cs > CS_MAX || sc->cspins[cs] == NULL) { if (sc->debug || bootverbose) device_printf(sc->dev, "Invalid chip select %u\n", cs); return (EINVAL); } mtx_lock(&sc->mtx); if (sc->debug >= 1) { device_printf(sc->dev, "spi_transfer, cs 0x%x clock %u mode %u\n", cs, clock, mode); } /* Set up the hardware and select the device. */ spi_hw_setup(sc, cs, mode, clock); spi_set_chipsel(sc, cs, true); /* Transfer command then data bytes. */ err = 0; if (cmd->tx_cmd_sz > 0) err = spi_xfer_buf(sc, cmd->rx_cmd, cmd->tx_cmd, cmd->tx_cmd_sz); if (cmd->tx_data_sz > 0 && err == 0) err = spi_xfer_buf(sc, cmd->rx_data, cmd->tx_data, cmd->tx_data_sz); /* Deselect the device, turn off (and reset) hardware. */ spi_set_chipsel(sc, cs, false); WR4(sc, ECSPI_CTLREG, 0); mtx_unlock(&sc->mtx); return (err); } static phandle_t spi_get_node(device_t bus, device_t dev) { /* * Share our controller node with our spibus child; it instantiates * devices by walking the children contained within our node. */ return ofw_bus_get_node(bus); } static int spi_detach(device_t dev) { struct spi_softc *sc = device_get_softc(dev); int idx; mtx_lock(&sc->mtx); bus_generic_detach(sc->dev); if (sc->spibus != NULL) device_delete_child(dev, sc->spibus); for (idx = 0; idx < nitems(sc->cspins); ++idx) { if (sc->cspins[idx] != NULL) gpio_pin_release(sc->cspins[idx]); } if (sc->inthandle != NULL) bus_teardown_intr(sc->dev, sc->intres, sc->inthandle); if (sc->intres != NULL) bus_release_resource(sc->dev, SYS_RES_IRQ, 0, sc->intres); if (sc->memres != NULL) bus_release_resource(sc->dev, SYS_RES_MEMORY, 0, sc->memres); mtx_unlock(&sc->mtx); mtx_destroy(&sc->mtx); return (0); } static int spi_attach(device_t dev) { struct spi_softc *sc = device_get_softc(dev); phandle_t node; int err, idx, rid; sc->dev = dev; sc->basefreq = imx_ccm_ecspi_hz(); mtx_init(&sc->mtx, device_get_nameunit(dev), NULL, MTX_DEF); /* Set up debug-enable sysctl. */ SYSCTL_ADD_INT(device_get_sysctl_ctx(sc->dev), SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev)), OID_AUTO, "debug", CTLFLAG_RWTUN, &sc->debug, 0, "Enable debug, higher values = more info"); /* Allocate mmio register access resources. */ rid = 0; sc->memres = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->memres == NULL) { device_printf(sc->dev, "could not allocate registers\n"); spi_detach(sc->dev); return (ENXIO); } /* Allocate interrupt resources and set up handler. */ rid = 0; sc->intres = bus_alloc_resource_any(sc->dev, SYS_RES_IRQ, &rid, RF_ACTIVE); if (sc->intres == NULL) { device_printf(sc->dev, "could not allocate interrupt\n"); device_detach(sc->dev); return (ENXIO); } err = bus_setup_intr(sc->dev, sc->intres, INTR_TYPE_MISC | INTR_MPSAFE, NULL, spi_intr, sc, &sc->inthandle); if (err != 0) { device_printf(sc->dev, "could not setup interrupt handler"); device_detach(sc->dev); return (ENXIO); } /* Allocate gpio pins for configured chip selects. */ node = ofw_bus_get_node(sc->dev); for (idx = 0; idx < nitems(sc->cspins); ++idx) { err = gpio_pin_get_by_ofw_propidx(sc->dev, node, "cs-gpios", idx, &sc->cspins[idx]); if (err == 0) { gpio_pin_setflags(sc->cspins[idx], GPIO_PIN_OUTPUT); } else if (sc->debug >= 2) { device_printf(sc->dev, "cannot configure gpio for chip select %u\n", idx); } } /* * Hardware init: put all channels into Master mode, turn off the enable * bit (gates off clocks); we only enable the hardware while xfers run. */ WR4(sc, ECSPI_CTLREG, CTLREG_CMODES_MASTER); /* * Add the spibus driver as a child, and setup a one-shot intrhook to * attach it after interrupts are working. It will attach actual SPI * devices as its children, and those devices may need to do IO during * their attach. We can't do IO until timers and interrupts are working. */ sc->spibus = device_add_child(dev, "spibus", -1); config_intrhook_oneshot((ich_func_t)bus_generic_attach, dev); return (0); } static int spi_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data) return (ENXIO); device_set_desc(dev, "i.MX ECSPI Master"); return (BUS_PROBE_DEFAULT); } static device_method_t spi_methods[] = { DEVMETHOD(device_probe, spi_probe), DEVMETHOD(device_attach, spi_attach), DEVMETHOD(device_detach, spi_detach), /* spibus_if */ DEVMETHOD(spibus_transfer, spi_transfer), /* ofw_bus_if */ DEVMETHOD(ofw_bus_get_node, spi_get_node), DEVMETHOD_END }; static driver_t spi_driver = { "imx_spi", spi_methods, sizeof(struct spi_softc), }; static devclass_t spi_devclass; DRIVER_MODULE(imx_spi, simplebus, spi_driver, spi_devclass, 0, 0); DRIVER_MODULE(ofw_spibus, imx_spi, ofw_spibus_driver, ofw_spibus_devclass, 0, 0); MODULE_DEPEND(imx_spi, ofw_spibus, 1, 1, 1); +SIMPLEBUS_PNP_INFO(compat_data); Index: stable/11/sys/conf/NOTES =================================================================== --- stable/11/sys/conf/NOTES (revision 346546) +++ stable/11/sys/conf/NOTES (revision 346547) @@ -1,3080 +1,3085 @@ # $FreeBSD$ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', # 'makeoptions', 'hints', etc. go into the kernel configuration that you # run config(8) with. # # Lines that begin with 'hint.' are NOT for config(8), they go into your # hints file. See /boot/device.hints and/or the 'hints' config(8) directive. # # Please use ``make LINT'' to create an old-style LINT file if you want to # do kernel test-builds. # # This file contains machine independent kernel configuration notes. For # machine dependent notes, look in /sys//conf/NOTES. # # # NOTES conventions and style guide: # # Large block comments should begin and end with a line containing only a # comment character. # # To describe a particular object, a block comment (if it exists) should # come first. Next should come device, options, and hints lines in that # order. All device and option lines must be described by a comment that # doesn't just expand the device or option name. Use only a concise # comment on the same line if possible. Very detailed descriptions of # devices and subsystems belong in man pages. # # A space followed by a tab separates 'options' from an option name. Two # spaces followed by a tab separate 'device' from a device name. Comments # after an option or device should use one space after the comment character. # To comment out a negative option that disables code and thus should not be # enabled for LINT builds, precede 'options' with "#!". # # # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident LINT # # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a formula defined in subr_param.c. # Omitting this parameter or setting it to 0 will cause the system to # auto-size based on physical memory. # maxusers 10 # To statically compile in device wiring instead of /boot/device.hints #hints "LINT.hints" # Default places to look for devices. # Use the following to compile in values accessible to the kernel # through getenv() (or kenv(1) in userland). The format of the file # is 'variable=value', see kenv(1) # #env "LINT.env" # # The `makeoptions' parameter allows variables to be passed to the # generated Makefile in the build area. # # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} # after most other flags. Here we use it to inhibit use of non-optimal # gcc built-in functions (e.g., memcmp). # # DEBUG happens to be magic. # The following is equivalent to 'config -g KERNELNAME' and creates # 'kernel.debug' compiled with -g debugging as well as a normal # 'kernel'. Use 'make install.debug' to install the debug kernel # but that isn't normally necessary as the debug symbols are not loaded # by the kernel and are not useful there anyway. # # KERNEL can be overridden so that you can change the default name of your # kernel. # # MODULES_OVERRIDE can be used to limit modules built to a specific list. # makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo" # Only build ext2fs module plus those parts of the sound system I need. #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3" makeoptions DESTDIR=/tmp # # FreeBSD processes are subject to certain limits to their consumption # of system resources. See getrlimit(2) for more details. Each # resource limit has two values, a "soft" limit and a "hard" limit. # The soft limits can be modified during normal system operation, but # the hard limits are set at boot time. Their default values are # in sys//include/vmparam.h. There are two ways to change them: # # 1. Set the values at kernel build time. The options below are one # way to allow that limit to grow to 1GB. They can be increased # further by changing the parameters: # # 2. In /boot/loader.conf, set the tunables kern.maxswzone, # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, # kern.dflssiz, kern.maxssiz and kern.sgrowsiz. # # The options in /boot/loader.conf override anything in the kernel # configuration file. See the function init_param1 in # sys/kern/subr_param.c for more details. # options MAXDSIZ=(1024UL*1024*1024) options MAXSSIZ=(128UL*1024*1024) options DFLDSIZ=(1024UL*1024*1024) # # BLKDEV_IOSIZE sets the default block size used in user block # device I/O. Note that this value will be overridden by the label # when specifying a block device from a label with a non-0 # partition blocksize. The default is PAGE_SIZE. # options BLKDEV_IOSIZE=8192 # # MAXPHYS and DFLTPHYS # # These are the maximal and safe 'raw' I/O block device access sizes. # Reads and writes will be split into MAXPHYS chunks for known good # devices and DFLTPHYS for the rest. Some applications have better # performance with larger raw I/O access sizes. Note that certain VM # parameters are derived from these values and making them too large # can make an unbootable kernel. # # The defaults are 64K and 128K respectively. options DFLTPHYS=(64*1024) options MAXPHYS=(128*1024) # This allows you to actually store this configuration file into # the kernel binary itself. See config(8) for more details. # options INCLUDE_CONFIG_FILE # Include this file in kernel # # Compile-time defaults for various boot parameters # options BOOTVERBOSE=1 options BOOTHOWTO=RB_MULTIPLE # # Compile-time defaults for dmesg boot tagging # # Default boot tag; may use 'kern.boot_tag' loader tunable to override. The # current boot's tag is also exposed via the 'kern.boot_tag' sysctl. options BOOT_TAG=\"---<>---\" # Maximum boot tag size the kernel's static buffer should accomodate. Maximum # size for both BOOT_TAG and the assocated tunable. options BOOT_TAG_SZ=32 options GEOM_AES # Don't use, use GEOM_BDE (obsolete, gone in 12) options GEOM_BDE # Disk encryption. options GEOM_BSD # BSD disklabels (obsolete, gone in 12) options GEOM_CACHE # Disk cache. options GEOM_CONCAT # Disk concatenation. options GEOM_ELI # Disk encryption. options GEOM_FOX # Redundant path mitigation (obsolete, gone in 12) options GEOM_GATE # Userland services. options GEOM_JOURNAL # Journaling. options GEOM_LABEL # Providers labelization. options GEOM_LINUX_LVM # Linux LVM2 volumes options GEOM_MAP # Map based partitioning options GEOM_MBR # DOS/MBR partitioning (obsolete, gone in 12) options GEOM_MIRROR # Disk mirroring. options GEOM_MULTIPATH # Disk multipath options GEOM_NOP # Test class. options GEOM_PART_APM # Apple partitioning options GEOM_PART_BSD # BSD disklabel options GEOM_PART_BSD64 # BSD disklabel64 options GEOM_PART_EBR # Extended Boot Records options GEOM_PART_EBR_COMPAT # Backward compatible partition names options GEOM_PART_GPT # GPT partitioning options GEOM_PART_LDM # Logical Disk Manager options GEOM_PART_MBR # MBR partitioning options GEOM_PART_PC98 # PC-9800 disk partitioning options GEOM_PART_VTOC8 # SMI VTOC8 disk label options GEOM_PC98 # NEC PC9800 partitioning options GEOM_RAID # Soft RAID functionality. options GEOM_RAID3 # RAID3 functionality. options GEOM_SHSEC # Shared secret. options GEOM_STRIPE # Disk striping. options GEOM_SUNLABEL # Sun/Solaris partitioning (obsolete, gone in 12) options GEOM_UZIP # Read-only compressed disks options GEOM_VINUM # Vinum logical volume manager options GEOM_VIRSTOR # Virtual storage. options GEOM_VOL # Volume names from UFS superblock (obsolete, gone in 12) options GEOM_ZERO # Performance testing helper. # # The root device and filesystem type can be compiled in; # this provides a fallback option if the root device cannot # be correctly guessed by the bootstrap code, or an override if # the RB_DFLTROOT flag (-r) is specified when booting the kernel. # options ROOTDEVNAME=\"ufs:da0s2e\" ##################################################################### # Scheduler options: # # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options # select which scheduler is compiled in. # # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run # queue and no CPU affinity which makes it suboptimal for SMP. It has very # good interactivity and priority selection. # # SCHED_ULE provides significant performance advantages over 4BSD on many # workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues # and scheduler locks. It also has a stronger notion of interactivity # which leads to better responsiveness even on uniprocessor machines. This # is the default scheduler. # # SCHED_STATS is a debugging option which keeps some stats in the sysctl # tree at 'kern.sched.stats' and is useful for debugging scheduling decisions. # options SCHED_4BSD options SCHED_STATS #options SCHED_ULE ##################################################################### # SMP OPTIONS: # # SMP enables building of a Symmetric MultiProcessor Kernel. # Mandatory: options SMP # Symmetric MultiProcessor Kernel # EARLY_AP_STARTUP releases the Application Processors earlier in the # kernel startup process (before devices are probed) rather than at the # end. This is a temporary option for use during the transition from # late to early AP startup. options EARLY_AP_STARTUP # MAXCPU defines the maximum number of CPUs that can boot in the system. # A default value should be already present, for every architecture. options MAXCPU=32 # MAXMEMDOM defines the maximum number of memory domains that can boot in the # system. A default value should already be defined by every architecture. options MAXMEMDOM=2 # VM_NUMA_ALLOC enables use of memory domain-aware allocation in the VM # system. options VM_NUMA_ALLOC # DEVICE_NUMA enables reporting of domain affinity of I/O devices via # bus_get_domain(), etc. options DEVICE_NUMA # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin # if the thread that currently owns the mutex is executing on another # CPU. This behavior is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_MUTEXES # ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin # if the thread that currently owns the rwlock is executing on another # CPU. This behavior is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_RWLOCKS # ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that # currently owns the sx lock is executing on another CPU. # This behavior is enabled by default, so this option can be used to # disable it. options NO_ADAPTIVE_SX # MUTEX_NOINLINE forces mutex operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options MUTEX_NOINLINE # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options RWLOCK_NOINLINE # SX_NOINLINE forces sx lock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options SX_NOINLINE # SMP Debugging Options: # # CALLOUT_PROFILING enables rudimentary profiling of the callwheel data # structure used as backend in callout(9). # PREEMPTION allows the threads that are in the kernel to be preempted by # higher priority [interrupt] threads. It helps with interactivity # and allows interrupt threads to run sooner rather than waiting. # WARNING! Only tested on amd64 and i386. # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel # threads. Its sole use is to expose race conditions and other # bugs during development. Enabling this option will reduce # performance and increase the frequency of kernel panics by # design. If you aren't sure that you need it then you don't. # Relies on the PREEMPTION option. DON'T TURN THIS ON. # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table # used to hold active sleep queues as well as sleep wait message # frequency. # TURNSTILE_PROFILING enables rudimentary profiling of the hash table # used to hold active lock queues. # UMTX_PROFILING enables rudimentary profiling of the hash table used # to hold active lock queues. # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_KDB causes the witness code to drop into the kernel debugger if # a lock hierarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. options PREEMPTION options FULL_PREEMPTION options WITNESS options WITNESS_KDB options WITNESS_SKIPSPIN # LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details. options LOCK_PROFILING # Set the number of buffers and the hash size. The hash size MUST be larger # than the number of buffers. Hash size should be prime. options MPROF_BUFFERS="1536" options MPROF_HASH_SIZE="1543" # Profiling for the callout(9) backend. options CALLOUT_PROFILING # Profiling for internal hash tables. options SLEEPQUEUE_PROFILING options TURNSTILE_PROFILING options UMTX_PROFILING ##################################################################### # COMPATIBILITY OPTIONS # # Implement system calls compatible with 4.3BSD and older versions of # FreeBSD. You probably do NOT want to remove this as much current code # still relies on the 4.3 emulation. Note that some architectures that # are supported by FreeBSD do not include support for certain important # aspects of this compatibility option, namely those related to the # signal delivery mechanism. # options COMPAT_43 # Old tty interface. options COMPAT_43TTY # Note that as a general rule, COMPAT_FREEBSD depends on # COMPAT_FREEBSD, COMPAT_FREEBSD, etc. # Enable FreeBSD4 compatibility syscalls options COMPAT_FREEBSD4 # Enable FreeBSD5 compatibility syscalls options COMPAT_FREEBSD5 # Enable FreeBSD6 compatibility syscalls options COMPAT_FREEBSD6 # Enable FreeBSD7 compatibility syscalls options COMPAT_FREEBSD7 # Enable FreeBSD9 compatibility syscalls options COMPAT_FREEBSD9 # Enable FreeBSD10 compatibility syscalls options COMPAT_FREEBSD10 # Enable Linux Kernel Programming Interface options COMPAT_LINUXKPI # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS # # Compile with kernel debugger related code. # options KDB # # Print a stack trace of the current thread on the console for a panic. # options KDB_TRACE # # Don't enter the debugger for a panic. Intended for unattended operation # where you may want to enter the debugger from the console, but still want # the machine to recover from a panic. # options KDB_UNATTENDED # # Enable the ddb debugger backend. # options DDB # # Print the numerical value of symbols in addition to the symbolic # representation. # options DDB_NUMSYM # # Enable the remote gdb debugger backend. # options GDB # # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the # contents of the registered sysctl nodes on the console. It is disabled by # default because it generates excessively verbose console output that can # interfere with serial console operation. # options SYSCTL_DEBUG # # Enable textdump by default, this disables kernel core dumps. # options TEXTDUMP_PREFERRED # # Enable extra debug messages while performing textdumps. # options TEXTDUMP_VERBOSE # # NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the # resulting kernel. options NO_SYSCTL_DESCR # # MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9) # allocations that are smaller than a page. The purpose is to isolate # different malloc types into hash classes, so that any buffer # overruns or use-after-free will usually only affect memory from # malloc types in that hash class. This is purely a debugging tool; # by varying the hash function and tracking which hash class was # corrupted, the intersection of the hash classes from each instance # will point to a single malloc type that is being misused. At this # point inspection or memguard(9) can be used to catch the offending # code. # options MALLOC_DEBUG_MAXZONES=8 # # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator # for the kernel used to detect modify-after-free scenarios. See the # memguard(9) man page for more information on usage. # options DEBUG_MEMGUARD # # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for # malloc(9). # options DEBUG_REDZONE # # EARLY_PRINTF enables support for calling a special printf (eprintf) # very early in the kernel (before cn_init() has been called). This # should only be used for debugging purposes early in boot. Normally, # it is not defined. It is commented out here because this feature # isn't generally available. And the required eputc() isn't defined. # #options EARLY_PRINTF # # KTRACE enables the system-call tracing facility ktrace(2). To be more # SMP-friendly, KTRACE uses a worker thread to process most trace events # asynchronously to the thread generating the event. This requires a # pre-allocated store of objects representing trace events. The # KTRACE_REQUEST_POOL option specifies the initial size of this store. # The size of the pool can be adjusted both at boottime and runtime via # the kern.ktrace_request_pool tunable and sysctl. # options KTRACE #kernel tracing options KTRACE_REQUEST_POOL=101 # # KTR is a kernel tracing facility imported from BSD/OS. It is # enabled with the KTR option. KTR_ENTRIES defines the number of # entries in the circular trace buffer; it may be an arbitrary number. # KTR_BOOT_ENTRIES defines the number of entries during the early boot, # before malloc(9) is functional. # KTR_COMPILE defines the mask of events to compile into the kernel as # defined by the KTR_* constants in . KTR_MASK defines the # initial value of the ktr_mask variable which determines at runtime # what events to trace. KTR_CPUMASK determines which CPU's log # events, with bit X corresponding to CPU X. The layout of the string # passed as KTR_CPUMASK must match a series of bitmasks each of them # separated by the "," character (ie: # KTR_CPUMASK=0xAF,0xFFFFFFFFFFFFFFFF). KTR_VERBOSE enables # dumping of KTR events to the console by default. This functionality # can be toggled via the debug.ktr_verbose sysctl and defaults to off # if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details. # options KTR options KTR_BOOT_ENTRIES=1024 options KTR_ENTRIES=(128*1024) options KTR_COMPILE=(KTR_ALL) options KTR_MASK=KTR_INTR options KTR_CPUMASK=0x3 options KTR_VERBOSE # # ALQ(9) is a facility for the asynchronous queuing of records from the kernel # to a vnode, and is employed by services such as ktr(4) to produce trace # files based on a kernel event stream. Records are written asynchronously # in a worker thread. # options ALQ options KTR_ALQ # # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options INVARIANTS # # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you # wish to build a kernel module with 'INVARIANTS', then adding # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary # infrastructure without the added overhead. # options INVARIANT_SUPPORT # # The DIAGNOSTIC option is used to enable extra debugging information # from some parts of the kernel. As this makes everything more noisy, # it is disabled by default. # options DIAGNOSTIC # # REGRESSION causes optional kernel interfaces necessary only for regression # testing to be enabled. These interfaces may constitute security risks # when enabled, as they permit processes to easily modify aspects of the # run-time environment to reproduce unlikely or unusual (possibly normally # impossible) scenarios. # options REGRESSION # # This option lets some drivers co-exist that can't co-exist in a running # system. This is used to be able to compile all kernel code in one go for # quality assurance purposes (like this file, which the option takes it name # from.) # options COMPILING_LINT # # STACK enables the stack(9) facility, allowing the capture of kernel stack # for the purpose of procinfo(1), etc. stack(9) will also be compiled in # automatically if DDB(4) is compiled into the kernel. # options STACK ##################################################################### # PERFORMANCE MONITORING OPTIONS # # The hwpmc driver that allows the use of in-CPU performance monitoring # counters for performance monitoring. The base kernel needs to be configured # with the 'options' line, while the hwpmc device can be either compiled # in or loaded as a loadable kernel module. # # Additional configuration options may be required on specific architectures, # please see hwpmc(4). device hwpmc # Driver (also a loadable module) options HWPMC_DEBUG options HWPMC_HOOKS # Other necessary kernel hooks ##################################################################### # NETWORKING OPTIONS # # Protocol families # options INET #Internet communications protocols options INET6 #IPv6 communications protocols options ROUTETABLES=2 # allocated fibs up to 65536. default is 1. # but that would be a bad idea as they are large. options TCP_OFFLOAD # TCP offload support. # In order to enable IPSEC you MUST also add device crypto to # your kernel configuration options IPSEC #IP security (requires device crypto) # Option IPSEC_SUPPORT does not enable IPsec, but makes it possible to # load it as a kernel module. You still MUST add device crypto to your kernel # configuration. options IPSEC_SUPPORT #options IPSEC_DEBUG #debug for IP security # # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV # options. options NETSMB #SMB/CIFS requester # mchain library. It can be either loaded as KLD or compiled into kernel options LIBMCHAIN # libalias library, performing NAT options LIBALIAS # flowtable cache options FLOWTABLE # # SCTP is a NEW transport protocol defined by # RFC2960 updated by RFC3309 and RFC3758.. and # soon to have a new base RFC and many many more # extensions. This release supports all the extensions # including many drafts (most about to become RFC's). # It is the reference implementation of SCTP # and is quite well tested. # # Note YOU MUST have both INET and INET6 defined. # You don't have to enable V6, but SCTP is # dual stacked and so far we have not torn apart # the V6 and V4.. since an association can span # both a V6 and V4 address at the SAME time :-) # options SCTP # There are bunches of options: # this one turns on all sorts of # nastily printing that you can # do. It's all controlled by a # bit mask (settable by socket opt and # by sysctl). Including will not cause # logging until you set the bits.. but it # can be quite verbose.. so without this # option we don't do any of the tests for # bits and prints.. which makes the code run # faster.. if you are not debugging don't use. options SCTP_DEBUG # # All that options after that turn on specific types of # logging. You can monitor CWND growth, flight size # and all sorts of things. Go look at the code and # see. I have used this to produce interesting # charts and graphs as well :-> # # I have not yet committed the tools to get and print # the logs, I will do that eventually .. before then # if you want them send me an email rrs@freebsd.org # You basically must have ktr(4) enabled for these # and you then set the sysctl to turn on/off various # logging bits. Use ktrdump(8) to pull the log and run # it through a display program.. and graphs and other # things too. # options SCTP_LOCK_LOGGING options SCTP_MBUF_LOGGING options SCTP_MBCNT_LOGGING options SCTP_PACKET_LOGGING options SCTP_LTRACE_CHUNKS options SCTP_LTRACE_ERRORS # altq(9). Enable the base part of the hooks with the ALTQ option. # Individual disciplines must be built into the base system and can not be # loaded as modules at this point. ALTQ requires a stable TSC so if yours is # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC # option. options ALTQ options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_CODEL # CoDel Active Queueing options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_FAIRQ # Fair Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable options ALTQ_DEBUG # netgraph(4). Enable the base netgraph code with the NETGRAPH option. # Individual node types can be enabled with the corresponding option # listed below; however, this is not strictly necessary as netgraph # will automatically load the corresponding KLD module if the node type # is not already compiled into the kernel. Each type below has a # corresponding man page, e.g., ng_async(8). options NETGRAPH # netgraph(4) system options NETGRAPH_DEBUG # enable extra debugging, this # affects netgraph(4) and nodes # Node types options NETGRAPH_ASYNC options NETGRAPH_ATMLLC options NETGRAPH_ATM_ATMPIF options NETGRAPH_BLUETOOTH # ng_bluetooth(4) options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4) options NETGRAPH_BLUETOOTH_HCI # ng_hci(4) options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4) options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4) options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4) options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4) options NETGRAPH_BPF options NETGRAPH_BRIDGE options NETGRAPH_CAR options NETGRAPH_CISCO options NETGRAPH_DEFLATE options NETGRAPH_DEVICE options NETGRAPH_ECHO options NETGRAPH_EIFACE options NETGRAPH_ETHER options NETGRAPH_FRAME_RELAY options NETGRAPH_GIF options NETGRAPH_GIF_DEMUX options NETGRAPH_HOLE options NETGRAPH_IFACE options NETGRAPH_IP_INPUT options NETGRAPH_IPFW options NETGRAPH_KSOCKET options NETGRAPH_L2TP options NETGRAPH_LMI options NETGRAPH_MPPC_COMPRESSION options NETGRAPH_MPPC_ENCRYPTION options NETGRAPH_NETFLOW options NETGRAPH_NAT options NETGRAPH_ONE2MANY options NETGRAPH_PATCH options NETGRAPH_PIPE options NETGRAPH_PPP options NETGRAPH_PPPOE options NETGRAPH_PPTPGRE options NETGRAPH_PRED1 options NETGRAPH_RFC1490 options NETGRAPH_SOCKET options NETGRAPH_SPLIT options NETGRAPH_SPPP options NETGRAPH_TAG options NETGRAPH_TCPMSS options NETGRAPH_TEE options NETGRAPH_UI options NETGRAPH_VJC options NETGRAPH_VLAN # NgATM - Netgraph ATM options NGATM_ATM options NGATM_ATMBASE options NGATM_SSCOP options NGATM_SSCFU options NGATM_UNI options NGATM_CCATM device mn # Munich32x/Falc54 Nx64kbit/sec cards. # Network stack virtualization. #options VIMAGE #options VNET_DEBUG # debug for VIMAGE # # Network interfaces: # The `loop' device is MANDATORY when networking is enabled. device loop # The `ether' device provides generic code to handle # Ethernets; it is MANDATORY when an Ethernet device driver is # configured or token-ring is enabled. device ether # The `vlan' device implements the VLAN tagging of Ethernet frames # according to IEEE 802.1Q. device vlan # The `vxlan' device implements the VXLAN encapsulation of Ethernet # frames in UDP packets according to RFC7348. device vxlan # The `wlan' device provides generic code to support 802.11 # drivers, including host AP mode; it is MANDATORY for the wi, # and ath drivers and will eventually be required by all 802.11 drivers. device wlan options IEEE80211_DEBUG #enable debugging msgs options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support options IEEE80211_SUPPORT_TDMA #enable TDMA support # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide # support for WEP, TKIP, and AES-CCMP crypto protocols optionally # used with 802.11 devices that depend on the `wlan' module. device wlan_wep device wlan_ccmp device wlan_tkip # The `wlan_xauth' device provides support for external (i.e. user-mode) # authenticators for use with 802.11 drivers that use the `wlan' # module and support 802.1x and/or WPA security protocols. device wlan_xauth # The `wlan_acl' device provides a MAC-based access control mechanism # for use with 802.11 drivers operating in ap mode and using the # `wlan' module. # The 'wlan_amrr' device provides AMRR transmit rate control algorithm device wlan_acl device wlan_amrr # Generic TokenRing device token # The `fddi' device provides generic code to support FDDI. device fddi # The `arcnet' device provides generic code to support Arcnet. device arcnet # The `sppp' device serves a similar role for certain types # of synchronous PPP links (like `cx', `ar'). device sppp # The `bpf' device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. DHCP requires bpf. device bpf # The `netmap' device implements memory-mapped access to network # devices from userspace, enabling wire-speed packet capture and # generation even at 10Gbit/s. Requires support in the device # driver. Supported drivers are ixgbe, e1000, re. device netmap # The `disc' device implements a minimal network interface, # which throws away all packets sent and never receives any. It is # included for testing and benchmarking purposes. device disc # The `epair' device implements a virtual back-to-back connected Ethernet # like interface pair. device epair # The `edsc' device implements a minimal Ethernet interface, # which discards all packets sent and receives none. device edsc # The `tap' device is a pty-like virtual Ethernet interface device tap # The `tun' device implements (user-)ppp and nos-tun(8) device tun # The `gif' device implements IPv6 over IP4 tunneling, # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and # IPv6 over IPv6 tunneling. # The `gre' device implements GRE (Generic Routing Encapsulation) tunneling, # as specified in the RFC 2784 and RFC 2890. # The `me' device implements Minimal Encapsulation within IPv4 as # specified in the RFC 2004. # The XBONEHACK option allows the same pair of addresses to be configured on # multiple gif interfaces. device gif device gre device me options XBONEHACK # The `stf' device implements 6to4 encapsulation. device stf # The pf packet filter consists of three devices: # The `pf' device provides /dev/pf and the firewall code itself. # The `pflog' device provides the pflog0 interface which logs packets. # The `pfsync' device provides the pfsync0 interface used for # synchronization of firewall state tables (over the net). device pf device pflog device pfsync # Bridge interface. device if_bridge # Common Address Redundancy Protocol. See carp(4) for more details. device carp # IPsec interface. device enc # Link aggregation interface. device lagg # # Internet family options: # # MROUTING enables the kernel multicast packet forwarder, which works # with mrouted and XORP. # # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" # and if you do not add other rules during startup to allow access, # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open # in /etc/rc.conf when first enabling this feature, then refining the # firewall rules in /etc/rc.firewall after you've tested that the new kernel # feature works properly. # # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to # allow everything. Use with care, if a cracker can crash your # firewall machine, they can get to your protected machines. However, # if you are using it as an as-needed filter for specific problems as # they arise, then this may be for you. Changing the default to 'allow' # means that you won't get stuck if the kernel and /sbin/ipfw binary get # out of sync. # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It # depends on IPFIREWALL if compiled into the kernel. # # IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires # LIBALIAS. # # IPFIREWALL_NAT64 adds support for in kernel NAT64 in ipfw. # # IPFIREWALL_NPTV6 adds support for in kernel NPTv6 in ipfw. # # IPFIREWALL_PMOD adds support for protocols modification module. Currently # it supports only TCP MSS modification. # # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding # packets without touching the TTL). This can be useful to hide firewalls # from traceroute and similar tools. # # PF_DEFAULT_TO_DROP causes the default pf(4) rule to deny everything. # # TCPDEBUG enables code which keeps traces of the TCP state machine # for sockets with the SO_DEBUG option set, which can then be examined # using the trpt(8) utility. # # TCPPCAP enables code which keeps the last n packets sent and received # on a TCP socket. # # RADIX_MPATH provides support for equal-cost multi-path routing. # options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPFIREWALL_NAT #ipfw kernel nat support options IPFIREWALL_NAT64 #ipfw kernel NAT64 support options IPFIREWALL_NPTV6 #ipfw kernel IPv6 NPT support options IPDIVERT #divert sockets options IPFILTER #ipfilter support options IPFILTER_LOG #ipfilter logging options IPFILTER_LOOKUP #ipfilter pools options IPFILTER_DEFAULT_BLOCK #block all packets by default options IPSTEALTH #support for stealth forwarding options PF_DEFAULT_TO_DROP #drop everything by default options TCPDEBUG options TCPPCAP options RADIX_MPATH # The MBUF_STRESS_TEST option enables options which create # various random failures / extreme cases related to mbuf # functions. See mbuf(9) for a list of available test cases. # MBUF_PROFILING enables code to profile the mbuf chains # exiting the system (via participating interfaces) and # return a logarithmic histogram of monitored parameters # (e.g. packet size, wasted space, number of mbufs in chain). options MBUF_STRESS_TEST options MBUF_PROFILING # Statically link in accept filters options ACCEPT_FILTER_DATA options ACCEPT_FILTER_DNS options ACCEPT_FILTER_HTTP # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are # carried in TCP option 19. This option is commonly used to protect # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable. # This is enabled on a per-socket basis using the TCP_MD5SIG socket option. # This requires the use of 'device crypto' and either 'options IPSEC' or # 'options IPSEC_SUPPORT'. options TCP_SIGNATURE #include support for RFC 2385 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL # as well. See dummynet(4) and ipfw(8) for more info. When you run # DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve # a smooth scheduling of the traffic. options DUMMYNET ##################################################################### # FILESYSTEM OPTIONS # # Only the root filesystem needs to be statically compiled or preloaded # as module; everything else will be automatically loaded at mount # time. Some people still prefer to statically compile other # filesystems as well. # # NB: The UNION filesystem was known to be buggy in the past. It is now # being actively maintained, although there are still some issues being # resolved. # # One of these is mandatory: options FFS #Fast filesystem options NFSCL #Network File System client # The rest are optional: options AUTOFS #Automounter filesystem options CD9660 #ISO 9660 filesystem options FDESCFS #File descriptor filesystem options FUSE #FUSE support module options MSDOSFS #MS DOS File System (FAT, FAT32) options NFSLOCKD #Network Lock Manager options NFSD #Network Filesystem Server options KGSSAPI #Kernel GSSAPI implementation options NULLFS #NULL filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options PSEUDOFS_TRACE #Debugging support for PSEUDOFS options SMBFS #SMB/CIFS filesystem options TMPFS #Efficient memory filesystem options UDF #Universal Disk Format options UNIONFS #Union filesystem # The xFS_ROOT options REQUIRE the associated ``options xFS'' options NFS_ROOT #NFS usable as root device # Soft updates is a technique for improving filesystem speed and # making abrupt shutdown less risky. # options SOFTUPDATES # Extended attributes allow additional data to be associated with files, # and is used for ACLs, Capabilities, and MAC labels. # See src/sys/ufs/ufs/README.extattr for more information. options UFS_EXTATTR options UFS_EXTATTR_AUTOSTART # Access Control List support for UFS filesystems. The current ACL # implementation requires extended attribute support, UFS_EXTATTR, # for the underlying filesystem. # See src/sys/ufs/ufs/README.acls for more information. options UFS_ACL # Directory hashing improves the speed of operations on very large # directories at the expense of some memory. options UFS_DIRHASH # Gjournal-based UFS journaling support. options UFS_GJOURNAL # Make space in the kernel for a root filesystem on a md device. # Define to the number of kilobytes to reserve for the filesystem. # This is now optional. # If not defined, the root filesystem passed in as the MFS_IMAGE makeoption # will be automatically embedded in the kernel during linking. Its exact size # will be consumed within the kernel. # If defined, the old way of embedding the filesystem in the kernel will be # used. That is to say MD_ROOT_SIZE KB will be allocated in the kernel and # later, the filesystem image passed in as the MFS_IMAGE makeoption will be # dd'd into the reserved space if it fits. options MD_ROOT_SIZE=10 # Make the md device a potential root device, either with preloaded # images of type mfs_root or md_root. options MD_ROOT # Write-protect the md root device so that it may not be mounted writeable. options MD_ROOT_READONLY # Disk quotas are supported when this option is enabled. options QUOTA #enable disk quotas # If you are running a machine just as a fileserver for PC and MAC # users, using SAMBA, you may consider setting this option # and keeping all those users' directories on a filesystem that is # mounted with the suiddir option. This gives new files the same # ownership as the directory (similar to group). It's a security hole # if you let these users run programs, so confine it to file-servers # (but it'll save you lots of headaches in those cases). Root owned # directories are exempt and X bits are cleared. The suid bit must be # set on the directory as well; see chmod(1). PC owners can't see/set # ownerships so they keep getting their toes trodden on. This saves # you all the support calls as the filesystem it's used on will act as # they expect: "It's my dir so it must be my file". # options SUIDDIR # NFS options: options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec options NFS_MAXATTRTIMO=60 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec options NFS_MAXDIRATTRTIMO=60 options NFS_DEBUG # Enable NFS Debugging # # Add support for the EXT2FS filesystem of Linux fame. Be a bit # careful with this - the ext2fs code has a tendency to lag behind # changes and not be exercised very much, so mounting read/write could # be dangerous (and even mounting read only could result in panics.) # options EXT2FS # Cryptographically secure random number generator; /dev/random device random # The system memory devices; /dev/mem, /dev/kmem device mem # The kernel symbol table device; /dev/ksyms device ksyms # Optional character code conversion support with LIBICONV. # Each option requires their base file system and LIBICONV. options CD9660_ICONV options MSDOSFS_ICONV options UDF_ICONV ##################################################################### # POSIX P1003.1B # Real time extensions added in the 1993 POSIX # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING options _KPOSIX_PRIORITY_SCHEDULING # p1003_1b_semaphores are very experimental, # user should be ready to assist in debugging if problems arise. options P1003_1B_SEMAPHORES # POSIX message queue options P1003_1B_MQUEUE ##################################################################### # SECURITY POLICY PARAMETERS # Support for BSM audit options AUDIT # Support for Mandatory Access Control (MAC): options MAC options MAC_BIBA options MAC_BSDEXTENDED options MAC_IFOFF options MAC_LOMAC options MAC_MLS options MAC_NONE options MAC_PARTITION options MAC_PORTACL options MAC_SEEOTHERUIDS options MAC_STUB options MAC_TEST # Support for Capsicum options CAPABILITIES # fine-grained rights on file descriptors options CAPABILITY_MODE # sandboxes with no global namespace access ##################################################################### # CLOCK OPTIONS # The granularity of operation is controlled by the kernel option HZ whose # default value (1000 on most architectures) means a granularity of 1ms # (1s/HZ). Historically, the default was 100, but finer granularity is # required for DUMMYNET and other systems on modern hardware. There are # reasonable arguments that HZ should, in fact, be 100 still; consider, # that reducing the granularity too much might cause excessive overhead in # clock interrupt processing, potentially causing ticks to be missed and thus # actually reducing the accuracy of operation. options HZ=100 # Enable support for the kernel PLL to use an external PPS signal, # under supervision of [x]ntpd(8) # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp options PPS_SYNC # Enable support for generic feed-forward clocks in the kernel. # The feed-forward clock support is an alternative to the feedback oriented # ntpd/system clock approach, and is to be used with a feed-forward # synchronization algorithm such as the RADclock: # More info here: http://www.synclab.org/radclock options FFCLOCK ##################################################################### # SCSI DEVICES # SCSI DEVICE CONFIGURATION # The SCSI subsystem consists of the `base' SCSI code, a number of # high-level SCSI device `type' drivers, and the low-level host-adapter # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # # It is possible to wire down your SCSI devices so that a given bus, # target, and LUN always come on line as the same device unit. In # earlier versions the unit numbers were assigned in the order that # the devices were probed on the SCSI bus. This means that if you # removed a disk drive, you may have had to rewrite your /etc/fstab # file, and also that you had to be careful when adding a new disk # as it may have been probed earlier and moved your device configuration # around. (See also option GEOM_VOL for a different solution to this # problem.) # This old behavior is maintained as the default behavior. The unit # assignment begins with the first non-wired down unit for a device # type. For example, if you wire a disk as "da3" then the first # non-wired disk will be assigned da4. # The syntax for wiring down devices is: hint.scbus.0.at="ahc0" hint.scbus.1.at="ahc1" hint.scbus.1.bus="0" hint.scbus.3.at="ahc2" hint.scbus.3.bus="0" hint.scbus.2.at="ahc2" hint.scbus.2.bus="1" hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" hint.da.1.at="scbus3" hint.da.1.target="1" hint.da.2.at="scbus2" hint.da.2.target="3" hint.sa.1.at="scbus1" hint.sa.1.target="6" # "units" (SCSI logical unit number) that are not specified are # treated as if specified as LUN 0. # All SCSI devices allocate as many units as are required. # The ch driver drives SCSI Media Changer ("jukebox") devices. # # The da driver drives SCSI Direct Access ("disk") and Optical Media # ("WORM") devices. # # The sa driver drives SCSI Sequential Access ("tape") devices. # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # # The ses driver drives SCSI Environment Services ("ses") and # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # # The sg driver provides a passthrough API that is compatible with the # Linux SG driver. It will work in conjunction with the COMPAT_LINUX # option to run linux SG apps. It can also stand on its own and provide # source level API compatibility for porting apps to FreeBSD. # # Target Mode support is provided here but also requires that a SIM # (SCSI Host Adapter Driver) provide support as well. # # The targ driver provides target mode support as a Processor type device. # It exists to give the minimal context necessary to respond to Inquiry # commands. There is a sample user application that shows how the rest # of the command support might be done in /usr/share/examples/scsi_target. # # The targbh driver provides target mode support and exists to respond # to incoming commands that do not otherwise have a logical unit assigned # to them. # # The pass driver provides a passthrough API to access the CAM subsystem. device scbus #base SCSI code device ch #SCSI media changers device da #SCSI direct access devices (aka disks) device sa #SCSI tapes device cd #SCSI CD-ROMs device ses #Enclosure Services (SES and SAF-TE) device pt #SCSI processor device targ #SCSI Target Mode Code device targbh #SCSI Target Mode Blackhole Device device pass #CAM passthrough driver device sg #Linux SCSI passthrough device ctl #CAM Target Layer # CAM OPTIONS: # debugging options: # CAMDEBUG Compile in all possible debugging. # CAM_DEBUG_COMPILE Debug levels to compile in. # CAM_DEBUG_FLAGS Debug levels to enable on boot. # CAM_DEBUG_BUS Limit debugging to the given bus. # CAM_DEBUG_TARGET Limit debugging to the given target. # CAM_DEBUG_LUN Limit debugging to the given lun. # CAM_DEBUG_DELAY Delay in us after printing each debug line. # # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) # queue after a bus reset, and the number of milliseconds to # freeze the device queue after a bus device reset. This # can be changed at boot and runtime with the # kern.cam.scsi_delay tunable/sysctl. options CAMDEBUG options CAM_DEBUG_COMPILE=-1 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH) options CAM_DEBUG_BUS=-1 options CAM_DEBUG_TARGET=-1 options CAM_DEBUG_LUN=-1 options CAM_DEBUG_DELAY=1 options CAM_MAX_HIGHPOWER=4 options SCSI_NO_SENSE_STRINGS options SCSI_NO_OP_STRINGS options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device options CAM_IOSCHED_DYNAMIC # Options for the CAM CDROM driver: # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only # enforced if there is I/O waiting for another LUN # The compiled in defaults for these variables are 2 and 10 seconds, # respectively. # # These can also be changed on the fly with the following sysctl variables: # kern.cam.cd.changer.min_busy_seconds # kern.cam.cd.changer.max_busy_seconds # options CHANGER_MIN_BUSY_SECONDS=2 options CHANGER_MAX_BUSY_SECONDS=10 # Options for the CAM sequential access driver: # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT. options SA_IO_TIMEOUT=4 options SA_SPACE_TIMEOUT=60 options SA_REWIND_TIMEOUT=(2*60) options SA_ERASE_TIMEOUT=(4*60) options SA_1FM_AT_EOD # Optional timeout for the CAM processor target (pt) device # This is specified in seconds. The default is 60 seconds. options SCSI_PT_DEFAULT_TIMEOUT=60 # Optional enable of doing SES passthrough on other devices (e.g., disks) # # Normally disabled because a lot of newer SCSI disks report themselves # as having SES capabilities, but this can then clot up attempts to build # a topology with the SES device that's on the box these drives are in.... options SES_ENABLE_PASSTHROUGH ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device pty #BSD-style compatibility pseudo ttys device nmdm #back-to-back tty devices device md #Memory/malloc disk device snp #Snoop device - to look at pty/vty/etc.. device ccd #Concatenated disk driver device firmware #firmware(9) support # Kernel side iconv library options LIBICONV # Size of the kernel message buffer. Should be N * pagesize. options MSGBUF_SIZE=40960 ##################################################################### # HARDWARE BUS CONFIGURATION # # PCI bus & PCI options: # device pci options PCI_HP # PCI-Express native HotPlug options PCI_IOV # PCI SR-IOV support ##################################################################### # HARDWARE DEVICE CONFIGURATION # For ISA the required hints are listed. # EISA, MCA, PCI, CardBus, SD/MMC and pccard are self identifying buses, so # no hints are needed. # # Mandatory devices: # # These options are valid for other keyboard drivers as well. options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap options KBD_INSTALL_CDEV # install a CDEV entry in /dev device kbdmux # keyboard multiplexer options KBDMUX_DFLT_KEYMAP # specify the built-in keymap makeoptions KBDMUX_DFLT_KEYMAP=it.iso options FB_DEBUG # Frame buffer debugging device splash # Splash screen and screen saver support # Various screen savers. device blank_saver device daemon_saver device dragon_saver device fade_saver device fire_saver device green_saver device logo_saver device rain_saver device snake_saver device star_saver device warp_saver # The syscons console driver (SCO color console compatible). device sc hint.sc.0.at="isa" options MAXCONS=16 # number of virtual consoles options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp850 options SC_DISABLE_KDBKEY # disable `debug' key options SC_DISABLE_REBOOT # disable reboot key sequence options SC_HISTORY_SIZE=200 # number of history buffer lines options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor options SC_PIXEL_MODE # add support for the raster text mode # The following options will let you change the default colors of syscons. options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK) options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) # The following options will let you change the default behavior of # cut-n-paste feature options SC_CUT_SPACES2TABS # convert leading spaces into tabs options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words # (default is single space - \"x20\") # If you have a two button mouse, you may want to add the following option # to use the right button of the mouse to paste text. options SC_TWOBUTTON_MOUSE # You can selectively disable features in syscons. options SC_NO_CUTPASTE options SC_NO_FONT_LOADING options SC_NO_HISTORY options SC_NO_MODE_CHANGE options SC_NO_SYSMOUSE options SC_NO_SUSPEND_VTYSWITCH # `flags' for sc # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode # 0x100 Probe for a keyboard device periodically if one is not present # Enable experimental features of the syscons terminal emulator (teken). options TEKEN_CONS25 # cons25-style terminal emulation options TEKEN_UTF8 # UTF-8 output handling # The vt video console driver. device vt options VT_ALT_TO_ESC_HACK=1 # Prepend ESC sequence to ALT keys options VT_MAXWINDOWS=16 # Number of virtual consoles options VT_TWOBUTTON_MOUSE # Use right mouse button to paste # The following options set the default framebuffer size. options VT_FB_DEFAULT_HEIGHT=480 options VT_FB_DEFAULT_WIDTH=640 # The following options will let you change the default vt terminal colors. options TERMINAL_NORM_ATTR=(FG_GREEN|BG_BLACK) options TERMINAL_KERN_ATTR=(FG_LIGHTRED|BG_BLACK) # # Optional devices: # # # SCSI host adapters: # # adv: All Narrow SCSI bus AdvanSys controllers. # adw: Second Generation AdvanSys controllers including the ADV940UW. # aha: Adaptec 154x/1535/1640 # ahb: Adaptec 174x EISA controllers # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx # ahd: Adaptec 29320/39320 Controllers. # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS) # bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, # BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F # esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers # including the AMD Am53C974 (found on devices such as the Tekram # DC-390(T)) and the Sun ESP and FAS families of controllers # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters. # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters. # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters. # ispfw: Firmware module for Qlogic host adapters # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4 # or FC9x9 Fibre Channel host adapters. # ncr: NCR 53C810, 53C825 self-contained SCSI host adapters. # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors: # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875, # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. # trm: Tekram DC395U/UW/F DC315U adapters. # wds: WD7000 # # Note that the order is important in order for Buslogic ISA/EISA cards to be # probed correctly. # device bt hint.bt.0.at="isa" hint.bt.0.port="0x330" device adv hint.adv.0.at="isa" device adw device aha hint.aha.0.at="isa" device aic hint.aic.0.at="isa" device ahb device ahc device ahd device esp device iscsi_initiator device isp hint.isp.0.disable="1" hint.isp.0.role="3" hint.isp.0.prefer_iomap="1" hint.isp.0.prefer_memmap="1" hint.isp.0.fwload_disable="1" hint.isp.0.ignore_nvram="1" hint.isp.0.fullduplex="1" hint.isp.0.topology="lport" hint.isp.0.topology="nport" hint.isp.0.topology="lport-only" hint.isp.0.topology="nport-only" # we can't get u_int64_t types, nor can we get strings if it's got # a leading 0x, hence this silly dodge. hint.isp.0.portwnn="w50000000aaaa0000" hint.isp.0.nodewnn="w50000000aaaa0001" device ispfw device mpt device ncr device sym device trm device wds hint.wds.0.at="isa" hint.wds.0.port="0x350" hint.wds.0.irq="11" hint.wds.0.drq="6" # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, # this doesn't work on some motherboards, which prevents it from being the # default. options AHC_ALLOW_MEMIO # Dump the contents of the ahc controller configuration PROM. options AHC_DUMP_EEPROM # Bitmap of units to enable targetmode operations. options AHC_TMODE_ENABLE # Compile in Aic7xxx Debugging code. options AHC_DEBUG # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h options AHC_DEBUG_OPTS # Print register bitfields in debug output. Adds ~128k to driver # See ahc(4). options AHC_REG_PRETTY_PRINT # Compile in aic79xx debugging code. options AHD_DEBUG # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4). options AHD_DEBUG_OPTS=0xFFFFFFFF # Print human-readable register definitions when debugging options AHD_REG_PRETTY_PRINT # Bitmap of units to enable targetmode operations. options AHD_TMODE_ENABLE # The adw driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. options ADW_ALLOW_MEMIO # Options used in dev/iscsi (Software iSCSI stack) # options ISCSI_INITIATOR_DEBUG=9 # Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # options ISP_TARGET_MODE=1 # # ISP_DEFAULT_ROLES - default role # none=0 # target=1 # initiator=2 # both=3 (not supported currently) # # ISP_INTERNAL_TARGET (trivial internal disk target, for testing) # options ISP_DEFAULT_ROLES=0 # Options used in dev/sym/ (Symbios SCSI driver). #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 #options SYM_SETUP_PCI_PARITY #-PCI parity checking # disabled:0, enabled:1 (default) #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] # The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/). # These have hardware RAID-{0,1,5} support, and do multi-initiator I/O. # The DPT controllers are commonly re-licensed under other brand-names - # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and # Compaq are actually DPT controllers. # # See src/sys/dev/dpt for debugging and other subtle options. # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various # instruments are enabled. The tools in # /usr/sbin/dpt_* assume these to be enabled. # DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h # DPT_RESET_HBA Make "reset" actually reset the controller # instead of fudging it. Only enable this if you # are 100% certain you need it. device dpt # DPT options #!CAM# options DPT_MEASURE_PERFORMANCE options DPT_RESET_HBA # # Compaq "CISS" RAID controllers (SmartRAID 5* series) # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device ciss # # Intel Integrated RAID controllers. # This driver was developed and is maintained by Intel. Contacts # at Intel for this driver are # "Kannanthanam, Boji T" and # "Leubner, Achim" . # device iir # # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later # firmware. These controllers have a SCSI-like interface, and require # the CAM infrastructure. # device mly # # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only # one entry is needed; the code will find and configure all supported # controllers. # device ida # Compaq Smart RAID device mlx # Mylex DAC960 device amr # AMI MegaRAID device amrp # SCSI Passthrough interface (optional, CAM req.) device mfi # LSI MegaRAID SAS device mfip # LSI MegaRAID SAS passthrough, requires CAM options MFI_DEBUG device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s # # 3ware ATA RAID # device twe # 3ware ATA RAID # # Serial ATA host controllers: # # ahci: Advanced Host Controller Interface (AHCI) compatible # mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers # siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers # # These drivers are part of cam(4) subsystem. They supersede less featured # ata(4) subsystem drivers, supporting same hardware. device ahci device mvs device siis # # The 'ATA' driver supports all legacy ATA/ATAPI controllers, including # PC Card devices. You only need one "device ata" for it to find all # PCI and PC Card ATA/ATAPI devices on modern machines. # Alternatively, individual bus and chipset drivers may be chosen by using # the 'atacore' driver then selecting the drivers on a per vendor basis. # For example to build a system which only supports a VIA chipset, # omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers. device ata # Modular ATA #device atacore # Core ATA functionality #device atapccard # CARDBUS support #device atabus # PC98 cbus support #device ataisa # ISA bus support #device atapci # PCI bus support; only generic chipset support # PCI ATA chipsets #device ataacard # ACARD #device ataacerlabs # Acer Labs Inc. (ALI) #device ataamd # American Micro Devices (AMD) #device ataati # ATI #device atacenatek # Cenatek #device atacypress # Cypress #device atacyrix # Cyrix #device atahighpoint # HighPoint #device ataintel # Intel #device ataite # Integrated Technology Inc. (ITE) #device atajmicron # JMicron #device atamarvell # Marvell #device atamicron # Micron #device atanational # National #device atanetcell # NetCell #device atanvidia # nVidia #device atapromise # Promise #device ataserverworks # ServerWorks #device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD) #device atasis # Silicon Integrated Systems Corp.(SiS) #device atavia # VIA Technologies Inc. # # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add: hint.ata.0.at="isa" hint.ata.0.port="0x1f0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" # # Standard floppy disk controllers and floppy tapes, supports # the Y-E DATA External FDD (PC Card) # device fdc hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" # # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you # gotta turn it actually on by setting the variable fd_debug with DDB, # however. options FDC_DEBUG # # Activate this line if you happen to have an Insight floppy tape. # Probing them proved to be dangerous for people with floppy disks only, # so it's "hidden" behind a flag: #hint.fdc.0.flags="1" # Specify floppy devices hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" # # uart: newbusified driver for serial interfaces. It consolidates the sio(4), # sab(4) and zs(4) drivers. # device uart # Options for uart(4) options UART_PPS_ON_CTS # Do time pulse capturing using CTS # instead of DCD. options UART_POLL_FREQ # Set polling rate, used when hw has # no interrupt support (50 Hz default). # The following hint should only be used for pure ISA devices. It is not # needed otherwise. Use of hints is strongly discouraged. hint.uart.0.at="isa" # The following 3 hints are used when the UART is a system device (i.e., a # console or debug port), but only on platforms that don't have any other # means to pass the information to the kernel. The unit number of the hint # is only used to bundle the hints together. There is no relation to the # unit number of the probed UART. hint.uart.0.port="0x3f8" hint.uart.0.flags="0x10" hint.uart.0.baud="115200" # `flags' for serial drivers that support consoles like sio(4) and uart(4): # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behavior. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # # Options for serial drivers that support consoles: options BREAK_TO_DEBUGGER # A BREAK/DBG on the console goes to # ddb, if available. # Solaris implements a new BREAK which is initiated by a character # sequence CR ~ ^b which is similar to a familiar pattern used on # Sun servers by the Remote Console. There are FreeBSD extensions: # CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot. options ALT_BREAK_TO_DEBUGGER # Serial Communications Controller # Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel # communications controllers. device scc # PCI Universal Communications driver # Supports various multi port PCI I/O cards. device puc # # Network interfaces: # # MII bus support is required for many PCI Ethernet NICs, # namely those which use MII-compliant transceivers or implement # transceiver control interfaces that operate like an MII. Adding # "device miibus" to the kernel config pulls in support for the generic # miibus API, the common support for for bit-bang'ing the MII and all # of the PHY drivers, including a generic one for PHYs that aren't # specifically handled by an individual driver. Support for specific # PHYs may be built by adding "device mii", "device mii_bitbang" if # needed by the NIC driver and then adding the appropriate PHY driver. device mii # Minimal MII support device mii_bitbang # Common module for bit-bang'ing the MII device miibus # MII support w/ bit-bang'ing and all PHYs device acphy # Altima Communications AC101 device amphy # AMD AM79c873 / Davicom DM910{1,2} device atphy # Attansic/Atheros F1 device axphy # Asix Semiconductor AX88x9x device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C device bnxt # Broadcom NetXtreme-C/NetXtreme-E device brgphy # Broadcom BCM54xx/57xx 1000baseTX device ciphy # Cicada/Vitesse CS/VSC8xxx device e1000phy # Marvell 88E1000 1000/100/10-BT device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces device icsphy # ICS ICS1889-1893 device ip1000phy # IC Plus IP1000A/IP1001 device jmphy # JMicron JMP211/JMP202 device lxtphy # Level One LXT-970 device mlphy # Micro Linear 6692 device nsgphy # NatSemi DP8361/DP83865/DP83891 device nsphy # NatSemi DP83840A device nsphyter # NatSemi DP83843/DP83815 device pnaphy # HomePNA device qsphy # Quality Semiconductor QS6612 device rdcphy # RDC Semiconductor R6040 device rgephy # RealTek 8169S/8110S/8211B/8211C device rlphy # RealTek 8139 device rlswitch # RealTek 8305 device smcphy # SMSC LAN91C111 device tdkphy # TDK 89Q2120 device tlphy # Texas Instruments ThunderLAN device truephy # LSI TruePHY device xmphy # XaQti XMAC II # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA, # PCI and ISA varieties. # ae: Support for gigabit ethernet adapters based on the Attansic/Atheros # L2 PCI-Express FastEthernet controllers. # age: Support for gigabit ethernet adapters based on the Attansic/Atheros # L1 PCI express gigabit ethernet controllers. # alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers. # ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers. # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet # adapters. # bfe: Broadcom BCM4401 Ethernet adapter. # bge: Support for gigabit ethernet adapters based on the Broadcom # BCM570x family of controllers, including the 3Com 3c996-T, # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and # the embedded gigE NICs on Dell PowerEdge 2550 servers. # bnxt: Broadcom NetXtreme-C and NetXtreme-E PCIe 10/25/50G Ethernet adapters. # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # bwi: Broadcom BCM430* and BCM431* family of wireless adapters. # bwn: Broadcom BCM43xx family of wireless adapters. # cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn # cm: Arcnet SMC COM90c26 / SMC COM90c56 # (and SMC COM90c66 in '56 compatibility mode) adapters. # cxgb: Chelsio T3 based 1GbE/10GbE PCIe Ethernet adapters. # cxgbe:Chelsio T4, T5, and T6-based 1/10/25/40/100GbE PCIe Ethernet # adapters. # cxgbev: Chelsio T4, T5, and T6-based PCIe Virtual Functions. # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143 # and various workalikes including: # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver # replaces the old al, ax, dm, pn and mx drivers. List of brands: # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110, # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX, # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204, # KNE110TX. # de: Digital Equipment DC21040 # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters. # igb: Intel Pro/1000 PCI Express Gigabit Ethernet: 82575 and later adapters. # ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589 # and PC Card devices using these chipsets. # ex: Intel EtherExpress Pro/10 and other i82595-based adapters, # Olicom Ethernet PC Card devices. # fe: Fujitsu MB86960A/MB86965A Ethernet # fea: DEC DEFEA EISA FDDI adapter # fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed. # fxp: Intel EtherExpress Pro/100B # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping) # gem: Apple GMAC/Sun ERI/Sun GEM # hme: Sun HME (Happy Meal Ethernet) # jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters. # le: AMD Am7900 LANCE and Am79C9xx PCnet # lge: Support for PCI gigabit ethernet adapters based on the Level 1 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX, # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards. # lio: Support for Cavium 23XX Ethernet adapters # malo: Marvell Libertas wireless NICs. # mwl: Marvell 88W8363 802.11n wireless NICs. # Requires the mwl firmware module # mwlfw: Marvell 88W8363 firmware # msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect # Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061, # 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053, # 88E8055, 88E8056 and D-Link 560T/550SX. # lmc: Support for the LMC/SBE wide-area network interface cards. # mlx5: Mellanox ConnectX-4 and ConnectX-4 LX IB and Eth shared code module. # mlx5en:Mellanox ConnectX-4 and ConnectX-4 LX PCIe Ethernet adapters. # my: Myson Fast Ethernet (MTD80X, MTD89X) # nge: Support for PCI gigabit ethernet adapters based on the National # Semiconductor DP83820 and DP83821 chipset. This includes the # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom # EP-320G-TX and the Netgear GA622T. # oce: Emulex 10 Gbit adapters (OneConnect Ethernet) # pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x # PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home # chipsets. These can also be handled by the le(4) driver if the # pcn(4) driver is left out of the kernel. The le(4) driver does not # support the additional features like the MII bus and burst mode of # the PCnet-FAST and greater chipsets though. # ral: Ralink Technology IEEE 802.11 wireless adapter # re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139 # chipset. Note that the RealTek driver defaults to using programmed # I/O to do register accesses because memory mapped mode seems to cause # severe lockups on SMP hardware. This driver also supports the # Accton EN1207D `Cheetah' adapter, which uses a chip called # the MPX 5030/5038, which is either a RealTek in disguise or a # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek # chipset and is supported by this driver, not the 'vr' driver. # rtwn: RealTek wireless adapters. # rtwnfw: RealTek wireless firmware. # sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the # Adaptec AIC-6915 "starfire" controller. # This includes dual and quad port cards, as well as one 100baseFX card. # Most of these are 64-bit PCI devices, except for one single port # card which is 32-bit. # sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter # sis: Support for NICs based on the Silicon Integrated Systems SiS 900, # SiS 7016 and NS DP83815 PCI fast ethernet controller chips. # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs. # This includes the SK-9841 and SK-9842 single port cards (single mode # and multimode fiber) and the SK-9843 and SK-9844 dual port cards # (also single mode and multimode). # The driver will autodetect the number of ports on the card and # attach each one as a separate network interface. # sn: Support for ISA and PC Card Ethernet devices using the # SMC91C90/92/94/95 chips. # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes # the D-Link DFE-550TX. # stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack # TC9021 family of controllers, including the Sundance ST2021/ST2023, # the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101. # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the # 3Com 3c985, the Netgear GA620 and various others. Note that you will # probably want to bump up kern.ipc.nmbclusters a lot to use this driver. # tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN' # cards and integrated ethernet controllers. This includes several # Compaq Netelligent 10/100 cards and the built-in ethernet controllers # in several Compaq Prosignia, Proliant and Deskpro systems. It also # supports several Olicom 10Mbps and 10/100 boards. # tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series) # txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset # vr: Support for various fast ethernet adapters based on the VIA # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, # including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for # DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320. # vte: DM&P Vortex86 RDC R6040 Fast Ethernet # vx: 3Com 3C590 and 3C595 # wb: Support for fast ethernet adapters based on the Winbond W89C840F chip. # Note: this is not the same as the Winbond W89C940F, which is a # NE2000 clone. # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA # bridge with a PCMCIA adapter plugged into it. # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller, # Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card, # Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56 # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast) # Etherlink XL cards and integrated controllers. This includes the # integrated 3c905B-TX chips in certain Dell Optiplex and Dell # Precision desktop machines and the integrated 3c905-TX chips # in Dell Latitude laptop docking stations. # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX # Order for ISA/EISA devices is important here device cm hint.cm.0.at="isa" hint.cm.0.port="0x2e0" hint.cm.0.irq="9" hint.cm.0.maddr="0xdc000" device ep device ex device fe hint.fe.0.at="isa" hint.fe.0.port="0x300" device fea device sn hint.sn.0.at="isa" hint.sn.0.port="0x300" hint.sn.0.irq="10" device an device wi device xe # PCI Ethernet NICs that use the common MII bus controller code. device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) hint.fxp.0.prefer_iomap="0" device gem # Apple GMAC/Sun ERI/Sun GEM device hme # Sun HME (Happy Meal Ethernet) device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device mlx5 # Shared code module between IB and Ethernet device mlx5en # Mellanox ConnectX-4 and ConnectX-4 LX device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device my # Myson Fast Ethernet (MTD80X, MTD89X) device nge # NatSemi DP83820 gigabit Ethernet device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device pcn # AMD Am79C97x PCI 10/100 NICs device sf # Adaptec AIC-6915 (``Starfire'') device sge # Silicon Integrated Systems SiS190/191 device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device vte # DM&P Vortex86 RDC R6040 Fast Ethernet device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # PCI Ethernet NICs. device cxgb # Chelsio T3 10 Gigabit Ethernet device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware device cxgbe # Chelsio T4-T6 1/10/25/40/100 Gigabit Ethernet device cxgbev # Chelsio T4-T6 Virtual Functions device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel Pro/1000 Gigabit Ethernet device igb # Intel Pro/1000 PCIE Gigabit Ethernet device ixgb # Intel Pro/10Gbe PCI-X Ethernet device ix # Intel Pro/10Gbe PCIE Ethernet device ixv # Intel Pro/10Gbe PCIE Ethernet VF device le # AMD Am7900 LANCE and Am79C9xx PCnet device mxge # Myricom Myri-10G 10GbE NIC device nxge # Neterion Xframe 10GbE Server/Storage Adapter device oce # Emulex 10 GbE (OneConnect Ethernet) device ti # Alteon Networks Tigon I/II gigabit Ethernet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') device vxge # Exar/Neterion XFrame 3100 10GbE # PCI FDDI NICs. device fpa # PCI WAN adapters. device lmc # PCI IEEE 802.11 Wireless NICs device ath # Atheros pci/cardbus NIC's device ath_hal # pci/cardbus chip support #device ath_ar5210 # AR5210 chips #device ath_ar5211 # AR5211 chips #device ath_ar5212 # AR5212 chips #device ath_rf2413 #device ath_rf2417 #device ath_rf2425 #device ath_rf5111 #device ath_rf5112 #device ath_rf5413 #device ath_ar5416 # AR5416 chips options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors # All of the AR5212 parts have a problem when paired with the AR71xx # CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx # only. Details of the exact nature of the bug are sketchy, but some can be # found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and # 6. This option enables this workaround. There is a performance penalty # for this work around, but without it things don't work at all. The DMA # from the card usually bursts 128 bytes, but on the affected CPUs, only # 4 are safe. options AH_RXCFG_SDMAMW_4BYTES #device ath_ar9160 # AR9160 chips #device ath_ar9280 # AR9280 chips #device ath_ar9285 # AR9285 chips device ath_rate_sample # SampleRate tx rate control for ath device bwi # Broadcom BCM430* BCM431* device bwn # Broadcom BCM43xx device malo # Marvell Libertas wireless NICs. device mwl # Marvell 88W8363 802.11n wireless NICs. device mwlfw device ral # Ralink Technology RT2500 wireless NICs. device rtwn # Realtek wireless NICs device rtwnfw # Use sf_buf(9) interface for jumbo buffers on ti(4) controllers. #options TI_SF_BUF_JUMBO # Turn on the header splitting option for the ti(4) driver firmware. This # only works for Tigon II chips, and has no effect for Tigon I chips. # This option requires the TI_SF_BUF_JUMBO option above. #options TI_JUMBO_HDRSPLIT # These two options allow manipulating the mbuf cluster size and mbuf size, # respectively. Be very careful with NIC driver modules when changing # these from their default values, because that can potentially cause a # mismatch between the mbuf size assumed by the kernel and the mbuf size # assumed by a module. The only driver that currently has the ability to # detect a mismatch is ti(4). options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB options MSIZE=512 # mbuf size in bytes # # ATM related options (Cranor version) # (note: this driver cannot be used with the HARP ATM stack) # # The `en' device provides support for Efficient Networks (ENI) # ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0). # # The `hatm' device provides support for Fore/Marconi HE155 and HE622 # ATM PCI cards. # # The `fatm' device provides support for Fore PCA200E ATM PCI cards. # # The `patm' device provides support for IDT77252 based cards like # ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards. # # atm device provides generic atm functions and is required for # atm devices. # NATM enables the netnatm protocol family that can be used to # bypass TCP/IP. # # utopia provides the access to the ATM PHY chips and is required for en, # hatm and fatm. # # the current driver supports only PVC operations (no atm-arp, no multicast). # for more details, please read the original documents at # http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html # device atm device en device fatm #Fore PCA200E device hatm #Fore/Marconi HE155/622 device patm #IDT77252 cards (ProATM and IDT) device utopia #ATM PHY driver options NATM #native ATM options LIBMBPOOL #needed by patm, iatm # # Sound drivers # # sound: The generic sound driver. # device sound # # snd_*: Device-specific drivers. # # The flags of the device tell the device a bit more info about the # device that normally is obtained through the PnP interface. # bit 2..0 secondary DMA channel; # bit 4 set if the board uses two dma channels; # bit 15..8 board type, overrides autodetection; leave it # zero if don't know what to put in (and you don't, # since this is unsupported at the moment...). # # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP. # snd_als4000: Avance Logic ALS4000 PCI. # snd_atiixp: ATI IXP 200/300/400 PCI. # snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only # for sparc64. # snd_cmi: CMedia CMI8338/CMI8738 PCI. # snd_cs4281: Crystal Semiconductor CS4281 PCI. # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except # 4281) # snd_ds1: Yamaha DS-1 PCI. # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI. # snd_emu10kx: Creative SoundBlaster Live! and Audigy # snd_envy24: VIA Envy24 and compatible, needs snd_spicds. # snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds. # snd_es137x: Ensoniq AudioPCI ES137x PCI. # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in # conjunction with snd_sbc. # snd_fm801: Forte Media FM801 PCI. # snd_gusc: Gravis UltraSound ISA PnP/non-PnP. # snd_hda: Intel High Definition Audio (Controller) and # compatible. # snd_hdspe: RME HDSPe AIO and RayDAT. # snd_ich: Intel ICH AC'97 and some more audio controllers # embedded in a chipset, for example nVidia # nForce controllers. # snd_maestro: ESS Technology Maestro-1/2x PCI. # snd_maestro3: ESS Technology Maestro-3/Allegro PCI. # snd_mss: Microsoft Sound System ISA PnP/non-PnP. # snd_neomagic: Neomagic 256 AV/ZX PCI. # snd_sb16: Creative SoundBlaster16, to be used in # conjunction with snd_sbc. # snd_sb8: Creative SoundBlaster (pre-16), to be used in # conjunction with snd_sbc. # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP. # Supports ESS and Avance ISA chips as well. # snd_solo: ESS Solo-1x PCI. # snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers. # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs # M5451 PCI. # snd_uaudio: USB audio. # snd_via8233: VIA VT8233x PCI. # snd_via82c686: VIA VT82C686A PCI. # snd_vibes: S3 Sonicvibes PCI. device snd_ad1816 device snd_als4000 device snd_atiixp #device snd_audiocs device snd_cmi device snd_cs4281 device snd_csa device snd_ds1 device snd_emu10k1 device snd_emu10kx device snd_envy24 device snd_envy24ht device snd_es137x device snd_ess device snd_fm801 device snd_gusc device snd_hda device snd_hdspe device snd_ich device snd_maestro device snd_maestro3 device snd_mss device snd_neomagic device snd_sb16 device snd_sb8 device snd_sbc device snd_solo device snd_spicds device snd_t4dwave device snd_uaudio device snd_via8233 device snd_via82c686 device snd_vibes # For non-PnP sound cards: hint.pcm.0.at="isa" hint.pcm.0.irq="10" hint.pcm.0.drq="1" hint.pcm.0.flags="0x0" hint.sbc.0.at="isa" hint.sbc.0.port="0x220" hint.sbc.0.irq="5" hint.sbc.0.drq="1" hint.sbc.0.flags="0x15" hint.gusc.0.at="isa" hint.gusc.0.port="0x220" hint.gusc.0.irq="5" hint.gusc.0.drq="1" hint.gusc.0.flags="0x13" # # Following options are intended for debugging/testing purposes: # # SND_DEBUG Enable extra debugging code that includes # sanity checking and possible increase of # verbosity. # # SND_DIAGNOSTIC Similar in a spirit of INVARIANTS/DIAGNOSTIC, # zero tolerance against inconsistencies. # # SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled # in. This options enable most feeder converters # except for 8bit. WARNING: May bloat the kernel. # # SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well. # # SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic # as much as possible (the default trying to # avoid it). Possible slowdown. # # SND_PCM_64 (Only applicable for i386/32bit arch) # Process 32bit samples through 64bit # integer/arithmetic. Slight increase of dynamic # range at a cost of possible slowdown. # # SND_OLDSTEREO Only 2 channels are allowed, effectively # disabling multichannel processing. # options SND_DEBUG options SND_DIAGNOSTIC options SND_FEEDER_MULTIFORMAT options SND_FEEDER_FULL_MULTIFORMAT options SND_FEEDER_RATE_HP options SND_PCM_64 options SND_OLDSTEREO # # Miscellaneous hardware: # # scd: Sony CD-ROM using proprietary (non-ATAPI) interface # mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board # joy: joystick (including IO DATA PCJOY PC Card joystick) # cmx: OmniKey CardMan 4040 pccard smartcard reader # Mitsumi CD-ROM device mcd hint.mcd.0.at="isa" hint.mcd.0.port="0x300" # for the Sony CDU31/33A CDROM device scd hint.scd.0.at="isa" hint.scd.0.port="0x230" device joy # PnP aware, hints for non-PnP only hint.joy.0.at="isa" hint.joy.0.port="0x201" device cmx # # The 'bktr' device is a PCI video capture device using the Brooktree # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a # TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator, # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo. # # options OVERRIDE_CARD=xxx # options OVERRIDE_TUNER=xxx # options OVERRIDE_MSP=1 # options OVERRIDE_DBX=1 # These options can be used to override the auto detection # The current values for xxx are found in src/sys/dev/bktr/bktr_card.h # Using sysctl(8) run-time overrides on a per-card basis can be made # # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL # or # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC # Specifies the default video capture mode. # This is required for Dual Crystal (28&35MHz) boards where PAL is used # to prevent hangs during initialization, e.g. VideoLogic Captivator PCI. # # options BKTR_USE_PLL # This is required for PAL or SECAM boards with a 28MHz crystal and no 35MHz # crystal, e.g. some new Bt878 cards. # # options BKTR_GPIO_ACCESS # This enables IOCTLs which give user level access to the GPIO port. # # options BKTR_NO_MSP_RESET # Prevents the MSP34xx reset. Good if you initialize the MSP in another OS first # # options BKTR_430_FX_MODE # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode. # # options BKTR_SIS_VIA_MODE # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is # needed for some old SiS and VIA chipset motherboards. # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset # motherboards and motherboards with bad or incomplete PCI 2.1 support. # As a rough guess, old = before 1998 # # options BKTR_NEW_MSP34XX_DRIVER # Use new, more complete initialization scheme for the msp34* soundchip. # Should fix stereo autodetection if the old driver does only output # mono sound. # # options BKTR_USE_FREEBSD_SMBUS # Compile with FreeBSD SMBus implementation # # Brooktree driver has been ported to the new I2C framework. Thus, # you'll need to have the following 3 lines in the kernel config. # device smbus # device iicbus # device iicbb # device iicsmb # The iic and smb devices are only needed if you want to control other # I2C slaves connected to the external connector of some cards. # device bktr # # PC Card/PCMCIA and Cardbus # # cbb: pci/cardbus bridge implementing YENTA interface # pccard: pccard slots # cardbus: cardbus slots device cbb device pccard device cardbus # # MMC/SD # # mmc MMC/SD bus # mmcsd MMC/SD memory card # sdhci Generic PCI SD Host Controller # device mmc device mmcsd device sdhci # # SMB bus # # System Management Bus support is provided by the 'smbus' device. # Access to the SMBus device is via the 'smb' device (/dev/smb*), # which is a child of the 'smbus' device. # # Supported devices: # smb standard I/O through /dev/smb* # # Supported SMB interfaces: # iicsmb I2C to SMB bridge with any iicbus interface # bktr brooktree848 I2C hardware interface # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit # amdpm AMD 756 Power Management Unit # amdsmb AMD 8111 SMBus 2.0 Controller # nfpm NVIDIA nForce Power Management Unit # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller # ismt Intel SMBus 2.0 controller chips (on Atom S1200, C2000) # device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device viapm device amdpm device amdsmb device nfpm device nfsmb device ismt device smb # SMBus peripheral devices # # jedec_dimm Asset and temperature reporting for DDR3 and DDR4 DIMMs # jedec_ts Temperature Sensor compliant with JEDEC Standard 21-C # device jedec_dimm device jedec_ts # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported devices: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. # iicoc simple polling driver for OpenCores I2C controller # # Supported interfaces: # bktr brooktree848 I2C software interface # # Other: # iicbb generic I2C bit-banging code (needed by lpbb, bktr) # device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge device iicoc # OpenCores I2C controller support # I2C peripheral devices # device ds1307 # Dallas DS1307 RTC and compatible device ds13rtc # All Dallas/Maxim ds13xx chips device ds1672 # Dallas DS1672 RTC device ds3231 # Dallas DS3231 RTC + temperature device icee # AT24Cxxx and compatible EEPROMs device lm75 # LM75 compatible temperature sensor device nxprtc # NXP RTCs: PCA/PFC212x PCA/PCF85xx device s35390a # Seiko Instruments S-35390A RTC # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. # Multiple devices may be attached to the parallel port, devices # are automatically probed and attached when found. # # Supported devices: # vpo Iomega Zip Drive # Requires SCSI disk support ('scbus' and 'da'), best # performance is achieved with ports in EPP 1.9 mode. # lpt Parallel Printer # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O # pps Pulse per second Timing Interface # lpbb Philips official parallel port I2C bit-banging interface # pcfclock Parallel port clock driver. # # Supported interfaces: # ppc ISA-bus parallel port interfaces. # options PPC_PROBE_CHIPSET # Enable chipset specific detection # (see flags in ppc(4)) options DEBUG_1284 # IEEE1284 signaling protocol debug options PERIPH_1284 # Makes your computer act as an IEEE1284 # compliant peripheral options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices options VP0_DEBUG # ZIP/ZIP+ debug options LPT_DEBUG # Printer driver debug options PPC_DEBUG # Parallel chipset level debug options PLIP_DEBUG # Parallel network IP interface debug options PCFCLOCK_VERBOSE # Verbose pcfclock driver options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10) device ppc hint.ppc.0.at="isa" hint.ppc.0.irq="7" device ppbus device vpo device lpt device plip device ppi device pps device lpbb device pcfclock # # Etherswitch framework and drivers # # etherswitch The etherswitch(4) framework # miiproxy Proxy device for miibus(4) functionality # # Switch hardware support: # arswitch Atheros switches # ip17x IC+ 17x family switches # rtl8366r Realtek RTL8366 switches # ukswitch Multi-PHY switches # device etherswitch device miiproxy device arswitch device ip17x device rtl8366rb device ukswitch # Kernel BOOTP support options BOOTP # Use BOOTP to obtain IP address/hostname # Requires NFSCL and NFS_ROOT options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info options BOOTP_NFSV3 # Use NFS v3 to NFS mount root options BOOTP_COMPAT # Workaround for broken bootp daemons. options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP options BOOTP_BLOCKSIZE=8192 # Override NFS block size # # Enable software watchdog routines, even if hardware watchdog is present. # By default, software watchdog timer is enabled only if no hardware watchdog # is present. # options SW_WATCHDOG # # Add the software deadlock resolver thread. # options DEADLKRES # # Disable swapping of stack pages. This option removes all # code which actually performs swapping, so it's not possible to turn # it back on at run-time. # # This is sometimes usable for systems which don't have any swap space # (see also sysctls "vm.defer_swapspace_pageouts" and # "vm.disable_swapspace_pageouts") # #options NO_SWAPPING # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers # for sendfile(2) that are used to map file VM pages, and normally # default to a quantity that is roughly 16*MAXUSERS+512. You would # typically want about 4 of these for each simultaneous file send. # options NSFBUFS=1024 # # Enable extra debugging code for locks. This stores the filename and # line of whatever acquired the lock in the lock itself, and changes a # number of function calls to pass around the relevant data. This is # not at all useful unless you are debugging lock code. Note that # modules should be recompiled as this option modifies KBI. # options DEBUG_LOCKS ##################################################################### # USB support # UHCI controller device uhci # OHCI controller device ohci # EHCI controller device ehci # XHCI controller device xhci # SL811 Controller #device slhci # General USB code (mandatory for USB) device usb # # USB Double Bulk Pipe devices device udbp # USB Fm Radio device ufm # USB temperature meter device ugold # USB LED device uled # Human Interface Device (anything with buttons and dials) device uhid # USB keyboard device ukbd # USB printer device ulpt # USB mass storage driver (Requires scbus and da) device umass # USB mass storage driver for device-side mode device usfs # USB support for Belkin F5U109 and Magic Control Technology serial adapters device umct # USB modem support device umodem # USB mouse device ums # USB touchpad(s) device atp device wsp # eGalax USB touch screen device uep # Diamond Rio 500 MP3 player device urio # # USB serial support device ucom # USB support for 3G modem cards by Option, Novatel, Huawei and Sierra device u3g # USB support for Technologies ARK3116 based serial adapters device uark # USB support for Belkin F5U103 and compatible serial adapters device ubsa # USB support for serial adapters based on the FT8U100AX and FT8U232AM device uftdi # USB support for some Windows CE based serial communication. device uipaq # USB support for Prolific PL-2303 serial adapters device uplcom # USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters device uslcom # USB Visor and Palm devices device uvisor # USB serial support for DDI pocket's PHS device uvscom # # USB ethernet support device uether # ADMtek USB ethernet. Supports the LinkSys USB100TX, # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus # eval board. device aue # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the # LinkSys USB200M and various other adapters. device axe # ASIX Electronics AX88178A/AX88179 USB 2.0/3.0 gigabit ethernet driver. device axge # # Devices which communicate using Ethernet over USB, particularly # Communication Device Class (CDC) Ethernet specification. Supports # Sharp Zaurus PDAs, some DOCSIS cable modems and so on. device cdce # # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate # and Netmate II, and the Belkin F5U111. device cue # # Kawasaki LSI ethernet. Supports the LinkSys USB10T, # Entrega USB-NET-E45, Peracom Ethernet Adapter, the # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T, # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB # and 2104USB, and the Corega USB-T. device kue # # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX # and the GREEN HOUSE GH-USB100B. device rue # # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC. device udav # # RealTek RTL8152 USB to fast ethernet. device ure # # Moschip MCS7730/MCS7840 USB to fast ethernet. Supports the Sitecom LN030. device mos # # HSxPA devices from Option N.V device uhso # Realtek RTL8188SU/RTL8191SU/RTL8192SU wireless driver device rsu # # Ralink Technology RT2501USB/RT2601USB wireless driver device rum # Ralink Technology RT2700U/RT2800U/RT3000U wireless driver device run # # Atheros AR5523 wireless driver device uath # # Conexant/Intersil PrismGT wireless driver device upgt # # Ralink Technology RT2500USB wireless driver device ural # # RNDIS USB ethernet driver device urndis # Realtek RTL8187B/L wireless driver device urtw # # ZyDas ZD1211/ZD1211B wireless driver device zyd # # Sierra USB wireless driver device usie # # debugging options for the USB subsystem # options USB_DEBUG options U3G_DEBUG # options for ukbd: options UKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions UKBD_DFLT_KEYMAP=jp.pc98 # options for uplcom: options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds # options for uvscom: options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds ##################################################################### # FireWire support device firewire # FireWire bus code device sbp # SCSI over Firewire (Requires scbus and da) device sbp_targ # SBP-2 Target mode (Requires scbus and targ) device fwe # Ethernet over FireWire (non-standard!) device fwip # IP over FireWire (RFC2734 and RFC3146) ##################################################################### # dcons support (Dumb Console Device) device dcons # dumb console driver device dcons_crom # FireWire attachment options DCONS_BUF_SIZE=16384 # buffer size options DCONS_POLL_HZ=100 # polling rate options DCONS_FORCE_CONSOLE=0 # force to be the primary console options DCONS_FORCE_GDB=1 # force to be the gdb device ##################################################################### # crypto subsystem # # This is a port of the OpenBSD crypto framework. Include this when # configuring IPSEC and when you have a h/w crypto device to accelerate # user applications that link to OpenSSL. # # Drivers are ports from OpenBSD with some simple enhancements that have # been fed back to OpenBSD. device crypto # core crypto support # Only install the cryptodev device if you are running tests, or know # specifically why you need it. In most cases, it is not needed and # will make things slower. device cryptodev # /dev/crypto for access to h/w device rndtest # FIPS 140-2 entropy tester device ccr # Chelsio T6 device hifn # Hifn 7951, 7781, etc. options HIFN_DEBUG # enable debugging support: hw.hifn.debug options HIFN_RNDTEST # enable rndtest support device ubsec # Broadcom 5501, 5601, 58xx options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug options UBSEC_RNDTEST # enable rndtest support ##################################################################### # # Embedded system options: # # An embedded system might want to run something other than init. options INIT_PATH=/sbin/init:/rescue/init # Debug options options BUS_DEBUG # enable newbus debugging options DEBUG_VFS_LOCKS # enable VFS lock debugging options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking options IFMEDIA_DEBUG # enable debugging in net/if_media.c # # Verbose SYSINIT # # Make the SYSINIT process performed by mi_startup() verbose. This is very # useful when porting to a new architecture. If DDB is also enabled, this # will print function names instead of addresses. If defined with a value # of zero, the verbose code is compiled-in but disabled by default, and can # be enabled with the debug.verbose_sysinit=1 tunable. options VERBOSE_SYSINIT ##################################################################### # SYSV IPC KERNEL PARAMETERS # # Maximum number of System V semaphores that can be used on the system at # one time. options SEMMNI=11 # Total number of semaphores system wide options SEMMNS=61 # Total number of undo structures in system options SEMMNU=31 # Maximum number of System V semaphores that can be used by a single process # at one time. options SEMMSL=61 # Maximum number of operations that can be outstanding on a single System V # semaphore at one time. options SEMOPM=101 # Maximum number of undo operations that can be outstanding on a single # System V semaphore at one time. options SEMUME=11 # Maximum number of shared memory pages system wide. options SHMALL=1025 # Maximum size, in bytes, of a single System V shared memory region. options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) options SHMMAXPGS=1025 # Minimum size, in bytes, of a single System V shared memory region. options SHMMIN=2 # Maximum number of shared memory regions that can be used on the system # at one time. options SHMMNI=33 # Maximum number of System V shared memory regions that can be attached to # a single process at one time. options SHMSEG=9 # Set the amount of time (in seconds) the system will wait before # rebooting automatically when a kernel panic occurs. If set to (-1), # the system will wait indefinitely until a key is pressed on the # console. options PANIC_REBOOT_WAIT_TIME=16 # Attempt to bypass the buffer cache and put data directly into the # userland buffer for read operation when O_DIRECT flag is set on the # file. Both offset and length of the read operation must be # multiples of the physical media sector size. # options DIRECTIO # Specify a lower limit for the number of swap I/O buffers. They are # (among other things) used when bypassing the buffer cache due to # DIRECTIO kernel option enabled and O_DIRECT flag set on file. # options NSWBUF_MIN=120 ##################################################################### # More undocumented options for linting. # Note that documenting these is not considered an affront. options CAM_DEBUG_DELAY # VFS cluster debugging. options CLUSTERDEBUG options DEBUG # Kernel filelock debugging. options LOCKF_DEBUG # System V compatible message queues # Please note that the values provided here are used to test kernel # building. The defaults in the sources provide almost the same numbers. # MSGSSZ must be a power of 2 between 8 and 1024. options MSGMNB=2049 # Max number of chars in queue options MSGMNI=41 # Max number of message queue identifiers options MSGSEG=2049 # Max number of message segments options MSGSSZ=16 # Size of a message segment options MSGTQL=41 # Max number of messages in system options NBUF=512 # Number of buffer headers options SCSI_NCR_DEBUG options SCSI_NCR_MAX_SYNC=10000 options SCSI_NCR_MAX_WIDE=1 options SCSI_NCR_MYADDR=7 options SC_DEBUG_LEVEL=5 # Syscons debug level options SC_RENDER_DEBUG # syscons rendering debugging options VFS_BIO_DEBUG # VFS buffer I/O debugging options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack options KSTACK_USAGE_PROF # Adaptec Array Controller driver options options AAC_DEBUG # Debugging levels: # 0 - quiet, only emit warnings # 1 - noisy, emit major function # points and things done # 2 - extremely noisy, emit trace # items in loops, etc. # Resource Accounting options RACCT # Resource Limits options RCTL # Yet more undocumented options for linting. # BKTR_ALLOC_PAGES has no effect except to cause warnings, and # BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the # driver still mostly spells this option BROOKTREE_ALLOC_PAGES. ##options BKTR_ALLOC_PAGES=(217*4+1) options BROOKTREE_ALLOC_PAGES=(217*4+1) options MAXFILES=999 # Random number generator # Only ONE of the below two may be used; they are mutually exclusive. # If neither is present, then the Fortuna algorithm is selected. #options RANDOM_YARROW # Yarrow CSPRNG (old default) #options RANDOM_LOADABLE # Allow the algorithm to be loaded as # a module. # Select this to allow high-rate but potentially expensive # harvesting of Slab-Allocator entropy. In very high-rate # situations the value of doing this is dubious at best. options RANDOM_ENABLE_UMA # slab allocator # Module to enable execution of application via emulators like QEMU options IMAGACT_BINMISC # Intel em(4) driver options EM_MULTIQUEUE # Activate multiqueue features/disable MSI-X # zlib I/O stream support # This enables support for compressed core dumps. options GZIO # BHND(4) drivers options BHND_LOGLEVEL # Logging threshold level # evdev interface device evdev # input event device support options EVDEV_SUPPORT # evdev support in legacy drivers options EVDEV_DEBUG # enable event debug msgs device uinput # install /dev/uinput cdev options UINPUT_DEBUG # enable uinput debug msgs +# Serial Peripheral Interface (SPI) support. +device spibus # Bus support. +device at45d # DataFlash driver +device mx25l # SPIFlash driver +device spigen # Generic access to SPI devices from userland. # Enable legacy /dev/spigenN name aliases for /dev/spigenX.Y devices. options SPIGEN_LEGACY_CDEVNAME # legacy device names for spigen device xz # xz_embedded LZMA de-compression library Index: stable/11/sys/dev/spibus/spigen.c =================================================================== --- stable/11/sys/dev/spibus/spigen.c (revision 346546) +++ stable/11/sys/dev/spibus/spigen.c (revision 346547) @@ -1,496 +1,399 @@ /*- * Copyright (c) 2015 Brian Fundakowski Feldman. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_platform.h" #include "opt_spi.h" #include #include #include #include #include #include #include #include #include #include #include #include #include -#include #include #include #include #include #include #include #include #include #ifdef FDT #include + +static struct ofw_compat_data compat_data[] = { + {"freebsd,spigen", true}, + {NULL, false} +}; + #endif #include "spibus_if.h" -#define SPIGEN_OPEN (1 << 0) -#define SPIGEN_MMAP_BUSY (1 << 1) - struct spigen_softc { device_t sc_dev; struct cdev *sc_cdev; #ifdef SPIGEN_LEGACY_CDEVNAME struct cdev *sc_adev; /* alias device */ #endif struct mtx sc_mtx; - uint32_t sc_command_length_max; /* cannot change while mmapped */ - uint32_t sc_data_length_max; /* cannot change while mmapped */ - vm_object_t sc_mmap_buffer; /* command, then data */ - vm_offset_t sc_mmap_kvaddr; - size_t sc_mmap_buffer_size; - int sc_debug; - int sc_flags; }; +struct spigen_mmap { + vm_object_t bufobj; + vm_offset_t kvaddr; + size_t bufsize; +}; + static int spigen_probe(device_t dev) { int rv; /* * By default we only bid to attach if specifically added by our parent * (usually via hint.spigen.#.at=busname). On FDT systems we bid as the * default driver based on being configured in the FDT data. */ rv = BUS_PROBE_NOWILDCARD; #ifdef FDT if (ofw_bus_status_okay(dev) && - ofw_bus_is_compatible(dev, "freebsd,spigen")) + ofw_bus_search_compatible(dev, compat_data)->ocd_data) rv = BUS_PROBE_DEFAULT; #endif device_set_desc(dev, "SPI Generic IO"); return (rv); } static int spigen_open(struct cdev *, int, int, struct thread *); static int spigen_ioctl(struct cdev *, u_long, caddr_t, int, struct thread *); static int spigen_close(struct cdev *, int, int, struct thread *); static d_mmap_single_t spigen_mmap_single; static struct cdevsw spigen_cdevsw = { .d_version = D_VERSION, .d_name = "spigen", .d_open = spigen_open, .d_ioctl = spigen_ioctl, .d_mmap_single = spigen_mmap_single, .d_close = spigen_close }; static int -spigen_command_length_max_proc(SYSCTL_HANDLER_ARGS) -{ - struct spigen_softc *sc = (struct spigen_softc *)arg1; - uint32_t command_length_max; - int error; - - mtx_lock(&sc->sc_mtx); - command_length_max = sc->sc_command_length_max; - mtx_unlock(&sc->sc_mtx); - error = sysctl_handle_int(oidp, &command_length_max, - sizeof(command_length_max), req); - if (error == 0 && req->newptr != NULL) { - mtx_lock(&sc->sc_mtx); - if (sc->sc_mmap_buffer != NULL) - error = EBUSY; - else - sc->sc_command_length_max = command_length_max; - mtx_unlock(&sc->sc_mtx); - } - return (error); -} - -static int -spigen_data_length_max_proc(SYSCTL_HANDLER_ARGS) -{ - struct spigen_softc *sc = (struct spigen_softc *)arg1; - uint32_t data_length_max; - int error; - - mtx_lock(&sc->sc_mtx); - data_length_max = sc->sc_data_length_max; - mtx_unlock(&sc->sc_mtx); - error = sysctl_handle_int(oidp, &data_length_max, - sizeof(data_length_max), req); - if (error == 0 && req->newptr != NULL) { - mtx_lock(&sc->sc_mtx); - if (sc->sc_mmap_buffer != NULL) - error = EBUSY; - else - sc->sc_data_length_max = data_length_max; - mtx_unlock(&sc->sc_mtx); - } - return (error); -} - -static void -spigen_sysctl_init(struct spigen_softc *sc) -{ - struct sysctl_ctx_list *ctx; - struct sysctl_oid *tree_node; - struct sysctl_oid_list *tree; - - /* - * Add system sysctl tree/handlers. - */ - ctx = device_get_sysctl_ctx(sc->sc_dev); - tree_node = device_get_sysctl_tree(sc->sc_dev); - tree = SYSCTL_CHILDREN(tree_node); - SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "command_length_max", - CTLFLAG_MPSAFE | CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc), - spigen_command_length_max_proc, "IU", "SPI command header portion (octets)"); - SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "data_length_max", - CTLFLAG_MPSAFE | CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc), - spigen_data_length_max_proc, "IU", "SPI data trailer portion (octets)"); - SYSCTL_ADD_INT(ctx, tree, OID_AUTO, "data", CTLFLAG_RW, - &sc->sc_debug, 0, "debug flags"); - -} - -static int spigen_attach(device_t dev) { struct spigen_softc *sc; const int unit = device_get_unit(dev); int cs, res; struct make_dev_args mda; spibus_get_cs(dev, &cs); cs &= ~SPIBUS_CS_HIGH; /* trim 'cs high' bit */ sc = device_get_softc(dev); sc->sc_dev = dev; - sc->sc_command_length_max = PAGE_SIZE; - sc->sc_data_length_max = PAGE_SIZE; mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF); make_dev_args_init(&mda); mda.mda_flags = MAKEDEV_WAITOK; mda.mda_devsw = &spigen_cdevsw; mda.mda_cr = NULL; mda.mda_uid = UID_ROOT; mda.mda_gid = GID_OPERATOR; mda.mda_mode = 0660; mda.mda_unit = unit; mda.mda_si_drv1 = dev; res = make_dev_s(&mda, &(sc->sc_cdev), "spigen%d.%d", device_get_unit(device_get_parent(dev)), cs); if (res) { return res; } #ifdef SPIGEN_LEGACY_CDEVNAME res = make_dev_alias_p(0, &sc->sc_adev, sc->sc_cdev, "spigen%d", unit); if (res) { if (sc->sc_cdev) { destroy_dev(sc->sc_cdev); sc->sc_cdev = NULL; } return res; } #endif - spigen_sysctl_init(sc); - return (0); } static int spigen_open(struct cdev *cdev, int oflags, int devtype, struct thread *td) { - int error; device_t dev; struct spigen_softc *sc; - error = 0; dev = cdev->si_drv1; sc = device_get_softc(dev); mtx_lock(&sc->sc_mtx); - if (sc->sc_flags & SPIGEN_OPEN) - error = EBUSY; - else - sc->sc_flags |= SPIGEN_OPEN; + device_busy(sc->sc_dev); mtx_unlock(&sc->sc_mtx); - return (error); + return (0); } static int spigen_transfer(struct cdev *cdev, struct spigen_transfer *st) { struct spi_command transfer = SPI_COMMAND_INITIALIZER; device_t dev = cdev->si_drv1; - struct spigen_softc *sc = device_get_softc(dev); int error = 0; - mtx_lock(&sc->sc_mtx); - if (st->st_command.iov_len == 0) - error = EINVAL; - else if (st->st_command.iov_len > sc->sc_command_length_max || - st->st_data.iov_len > sc->sc_data_length_max) - error = ENOMEM; - mtx_unlock(&sc->sc_mtx); - if (error) - return (error); - #if 0 device_printf(dev, "cmd %p %u data %p %u\n", st->st_command.iov_base, st->st_command.iov_len, st->st_data.iov_base, st->st_data.iov_len); #endif + + if (st->st_command.iov_len == 0) + return (EINVAL); + transfer.tx_cmd = transfer.rx_cmd = malloc(st->st_command.iov_len, M_DEVBUF, M_WAITOK); if (st->st_data.iov_len > 0) { transfer.tx_data = transfer.rx_data = malloc(st->st_data.iov_len, M_DEVBUF, M_WAITOK); } else transfer.tx_data = transfer.rx_data = NULL; error = copyin(st->st_command.iov_base, transfer.tx_cmd, transfer.tx_cmd_sz = transfer.rx_cmd_sz = st->st_command.iov_len); if ((error == 0) && (st->st_data.iov_len > 0)) error = copyin(st->st_data.iov_base, transfer.tx_data, transfer.tx_data_sz = transfer.rx_data_sz = st->st_data.iov_len); if (error == 0) error = SPIBUS_TRANSFER(device_get_parent(dev), dev, &transfer); if (error == 0) { error = copyout(transfer.rx_cmd, st->st_command.iov_base, transfer.rx_cmd_sz); if ((error == 0) && (st->st_data.iov_len > 0)) error = copyout(transfer.rx_data, st->st_data.iov_base, transfer.rx_data_sz); } free(transfer.tx_cmd, M_DEVBUF); free(transfer.tx_data, M_DEVBUF); return (error); } static int spigen_transfer_mmapped(struct cdev *cdev, struct spigen_transfer_mmapped *stm) { struct spi_command transfer = SPI_COMMAND_INITIALIZER; device_t dev = cdev->si_drv1; - struct spigen_softc *sc = device_get_softc(dev); - int error = 0; + struct spigen_mmap *mmap; + int error; - mtx_lock(&sc->sc_mtx); - if (sc->sc_flags & SPIGEN_MMAP_BUSY) - error = EBUSY; - else if (stm->stm_command_length > sc->sc_command_length_max || - stm->stm_data_length > sc->sc_data_length_max) - error = E2BIG; - else if (sc->sc_mmap_buffer == NULL) - error = EINVAL; - else if (sc->sc_mmap_buffer_size < - stm->stm_command_length + stm->stm_data_length) - error = ENOMEM; - if (error == 0) - sc->sc_flags |= SPIGEN_MMAP_BUSY; - mtx_unlock(&sc->sc_mtx); - if (error) + if ((error = devfs_get_cdevpriv((void **)&mmap)) != 0) return (error); - - transfer.tx_cmd = transfer.rx_cmd = (void *)sc->sc_mmap_kvaddr; + + if (mmap->bufsize < stm->stm_command_length + stm->stm_data_length) + return (E2BIG); + + transfer.tx_cmd = transfer.rx_cmd = (void *)((uintptr_t)mmap->kvaddr); transfer.tx_cmd_sz = transfer.rx_cmd_sz = stm->stm_command_length; transfer.tx_data = transfer.rx_data = - (void *)(sc->sc_mmap_kvaddr + stm->stm_command_length); + (void *)((uintptr_t)mmap->kvaddr + stm->stm_command_length); transfer.tx_data_sz = transfer.rx_data_sz = stm->stm_data_length; error = SPIBUS_TRANSFER(device_get_parent(dev), dev, &transfer); - mtx_lock(&sc->sc_mtx); - KASSERT((sc->sc_flags & SPIGEN_MMAP_BUSY), ("mmap no longer marked busy")); - sc->sc_flags &= ~(SPIGEN_MMAP_BUSY); - mtx_unlock(&sc->sc_mtx); return (error); } static int spigen_ioctl(struct cdev *cdev, u_long cmd, caddr_t data, int fflag, struct thread *td) { device_t dev = cdev->si_drv1; int error; switch (cmd) { case SPIGENIOC_TRANSFER: error = spigen_transfer(cdev, (struct spigen_transfer *)data); break; case SPIGENIOC_TRANSFER_MMAPPED: error = spigen_transfer_mmapped(cdev, (struct spigen_transfer_mmapped *)data); break; case SPIGENIOC_GET_CLOCK_SPEED: error = spibus_get_clock(dev, (uint32_t *)data); break; case SPIGENIOC_SET_CLOCK_SPEED: error = spibus_set_clock(dev, *(uint32_t *)data); break; case SPIGENIOC_GET_SPI_MODE: error = spibus_get_mode(dev, (uint32_t *)data); break; case SPIGENIOC_SET_SPI_MODE: error = spibus_set_mode(dev, *(uint32_t *)data); break; default: error = ENOTTY; break; } return (error); } +static void +spigen_mmap_cleanup(void *arg) +{ + struct spigen_mmap *mmap = arg; + + if (mmap->kvaddr != 0) + pmap_qremove(mmap->kvaddr, mmap->bufsize / PAGE_SIZE); + if (mmap->bufobj != NULL) + vm_object_deallocate(mmap->bufobj); + free(mmap, M_DEVBUF); +} + static int spigen_mmap_single(struct cdev *cdev, vm_ooffset_t *offset, vm_size_t size, struct vm_object **object, int nprot) { - device_t dev = cdev->si_drv1; - struct spigen_softc *sc = device_get_softc(dev); + struct spigen_mmap *mmap; vm_page_t *m; size_t n, pages; + int error; if (size == 0 || (nprot & (PROT_EXEC | PROT_READ | PROT_WRITE)) != (PROT_READ | PROT_WRITE)) return (EINVAL); size = roundup2(size, PAGE_SIZE); pages = size / PAGE_SIZE; - mtx_lock(&sc->sc_mtx); - if (sc->sc_mmap_buffer != NULL) { - mtx_unlock(&sc->sc_mtx); + if (devfs_get_cdevpriv((void **)&mmap) == 0) return (EBUSY); - } else if (size > sc->sc_command_length_max + sc->sc_data_length_max) { - mtx_unlock(&sc->sc_mtx); - return (E2BIG); + + mmap = malloc(sizeof(*mmap), M_DEVBUF, M_ZERO | M_WAITOK); + if ((mmap->kvaddr = kva_alloc(size)) == 0) { + spigen_mmap_cleanup(mmap); + return (ENOMEM); } - sc->sc_mmap_buffer_size = size; - *offset = 0; - sc->sc_mmap_buffer = *object = vm_pager_allocate(OBJT_PHYS, 0, size, - nprot, *offset, curthread->td_ucred); + mmap->bufsize = size; + mmap->bufobj = vm_pager_allocate(OBJT_PHYS, 0, size, nprot, 0, + curthread->td_ucred); + m = malloc(sizeof(*m) * pages, M_TEMP, M_WAITOK); - VM_OBJECT_WLOCK(*object); - vm_object_reference_locked(*object); // kernel and userland both + VM_OBJECT_WLOCK(mmap->bufobj); + vm_object_reference_locked(mmap->bufobj); // kernel and userland both for (n = 0; n < pages; n++) { - m[n] = vm_page_grab(*object, n, + m[n] = vm_page_grab(mmap->bufobj, n, VM_ALLOC_NOBUSY | VM_ALLOC_ZERO | VM_ALLOC_WIRED); m[n]->valid = VM_PAGE_BITS_ALL; } - VM_OBJECT_WUNLOCK(*object); - sc->sc_mmap_kvaddr = kva_alloc(size); - pmap_qenter(sc->sc_mmap_kvaddr, m, pages); + VM_OBJECT_WUNLOCK(mmap->bufobj); + pmap_qenter(mmap->kvaddr, m, pages); free(m, M_TEMP); - mtx_unlock(&sc->sc_mtx); - if (*object == NULL) - return (EINVAL); + if ((error = devfs_set_cdevpriv(mmap, spigen_mmap_cleanup)) != 0) { + /* Two threads were racing through this code; we lost. */ + spigen_mmap_cleanup(mmap); + return (error); + } + *offset = 0; + *object = mmap->bufobj; + return (0); } static int spigen_close(struct cdev *cdev, int fflag, int devtype, struct thread *td) { device_t dev = cdev->si_drv1; struct spigen_softc *sc = device_get_softc(dev); mtx_lock(&sc->sc_mtx); - if (sc->sc_mmap_buffer != NULL) { - pmap_qremove(sc->sc_mmap_kvaddr, - sc->sc_mmap_buffer_size / PAGE_SIZE); - kva_free(sc->sc_mmap_kvaddr, sc->sc_mmap_buffer_size); - sc->sc_mmap_kvaddr = 0; - vm_object_deallocate(sc->sc_mmap_buffer); - sc->sc_mmap_buffer = NULL; - sc->sc_mmap_buffer_size = 0; - } - sc->sc_flags &= ~(SPIGEN_OPEN); + device_unbusy(sc->sc_dev); mtx_unlock(&sc->sc_mtx); return (0); } static int spigen_detach(device_t dev) { struct spigen_softc *sc; sc = device_get_softc(dev); - mtx_lock(&sc->sc_mtx); - if (sc->sc_flags & SPIGEN_OPEN) { - mtx_unlock(&sc->sc_mtx); - return (EBUSY); - } - mtx_unlock(&sc->sc_mtx); - - mtx_destroy(&sc->sc_mtx); - #ifdef SPIGEN_LEGACY_CDEVNAME if (sc->sc_adev) destroy_dev(sc->sc_adev); #endif if (sc->sc_cdev) destroy_dev(sc->sc_cdev); + mtx_destroy(&sc->sc_mtx); + return (0); } static devclass_t spigen_devclass; static device_method_t spigen_methods[] = { /* Device interface */ DEVMETHOD(device_probe, spigen_probe), DEVMETHOD(device_attach, spigen_attach), DEVMETHOD(device_detach, spigen_detach), { 0, 0 } }; static driver_t spigen_driver = { "spigen", spigen_methods, sizeof(struct spigen_softc), }; DRIVER_MODULE(spigen, spibus, spigen_driver, spigen_devclass, 0, 0); MODULE_DEPEND(spigen, spibus, 1, 1, 1); +#ifdef FDT +SIMPLEBUS_PNP_INFO(compat_data); +#endif Index: stable/11 =================================================================== --- stable/11 (revision 346546) +++ stable/11 (revision 346547) Property changes on: stable/11 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r336137-336138,336202,336214,336216