Index: stable/11/sys/dev/usb/usb_hub.c =================================================================== --- stable/11/sys/dev/usb/usb_hub.c (revision 343134) +++ stable/11/sys/dev/usb/usb_hub.c (revision 343135) @@ -1,2951 +1,2965 @@ /* $FreeBSD$ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. * Copyright (c) 1998 Lennart Augustsson. All rights reserved. * Copyright (c) 2008-2010 Hans Petter Selasky. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * USB spec: http://www.usb.org/developers/docs/usbspec.zip */ #ifdef USB_GLOBAL_INCLUDE_FILE #include USB_GLOBAL_INCLUDE_FILE #else #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define USB_DEBUG_VAR uhub_debug #include #include #include #include #include #include #include #include #include #include #include #include #endif /* USB_GLOBAL_INCLUDE_FILE */ #define UHUB_INTR_INTERVAL 250 /* ms */ enum { UHUB_INTR_TRANSFER, #if USB_HAVE_TT_SUPPORT UHUB_RESET_TT_TRANSFER, #endif UHUB_N_TRANSFER, }; #ifdef USB_DEBUG static int uhub_debug = 0; static SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW, 0, "USB HUB"); SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RWTUN, &uhub_debug, 0, "Debug level"); #endif #if USB_HAVE_POWERD static int usb_power_timeout = 30; /* seconds */ SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RWTUN, &usb_power_timeout, 0, "USB power timeout"); #endif #if USB_HAVE_DISABLE_ENUM static int usb_disable_enumeration = 0; SYSCTL_INT(_hw_usb, OID_AUTO, disable_enumeration, CTLFLAG_RWTUN, &usb_disable_enumeration, 0, "Set to disable all USB device enumeration. " "This can secure against USB devices turning evil, " "for example a USB memory stick becoming a USB keyboard."); static int usb_disable_port_power = 0; SYSCTL_INT(_hw_usb, OID_AUTO, disable_port_power, CTLFLAG_RWTUN, &usb_disable_port_power, 0, "Set to disable all USB port power."); #endif struct uhub_current_state { uint16_t port_change; uint16_t port_status; }; struct uhub_softc { struct uhub_current_state sc_st;/* current state */ #if (USB_HAVE_FIXED_PORT != 0) struct usb_hub sc_hub; #endif device_t sc_dev; /* base device */ struct mtx sc_mtx; /* our mutex */ struct usb_device *sc_udev; /* USB device */ struct usb_xfer *sc_xfer[UHUB_N_TRANSFER]; /* interrupt xfer */ #if USB_HAVE_DISABLE_ENUM int sc_disable_enumeration; int sc_disable_port_power; #endif + uint8_t sc_usb_port_errors; /* error counter */ +#define UHUB_USB_PORT_ERRORS_MAX 4 uint8_t sc_flags; #define UHUB_FLAG_DID_EXPLORE 0x01 }; #define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol) #define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB) #define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT) #define UHUB_IS_MULTI_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBMTT) #define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB) /* prototypes for type checking: */ static device_probe_t uhub_probe; static device_attach_t uhub_attach; static device_detach_t uhub_detach; static device_suspend_t uhub_suspend; static device_resume_t uhub_resume; static bus_driver_added_t uhub_driver_added; static bus_child_location_str_t uhub_child_location_string; static bus_child_pnpinfo_str_t uhub_child_pnpinfo_string; static usb_callback_t uhub_intr_callback; #if USB_HAVE_TT_SUPPORT static usb_callback_t uhub_reset_tt_callback; #endif static void usb_dev_resume_peer(struct usb_device *udev); static void usb_dev_suspend_peer(struct usb_device *udev); static uint8_t usb_peer_should_wakeup(struct usb_device *udev); static const struct usb_config uhub_config[UHUB_N_TRANSFER] = { [UHUB_INTR_TRANSFER] = { .type = UE_INTERRUPT, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_ANY, .timeout = 0, .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, .bufsize = 0, /* use wMaxPacketSize */ .callback = &uhub_intr_callback, .interval = UHUB_INTR_INTERVAL, }, #if USB_HAVE_TT_SUPPORT [UHUB_RESET_TT_TRANSFER] = { .type = UE_CONTROL, .endpoint = 0x00, /* Control pipe */ .direction = UE_DIR_ANY, .bufsize = sizeof(struct usb_device_request), .callback = &uhub_reset_tt_callback, .timeout = 1000, /* 1 second */ .usb_mode = USB_MODE_HOST, }, #endif }; /* * driver instance for "hub" connected to "usb" * and "hub" connected to "hub" */ static devclass_t uhub_devclass; static device_method_t uhub_methods[] = { DEVMETHOD(device_probe, uhub_probe), DEVMETHOD(device_attach, uhub_attach), DEVMETHOD(device_detach, uhub_detach), DEVMETHOD(device_suspend, uhub_suspend), DEVMETHOD(device_resume, uhub_resume), DEVMETHOD(bus_child_location_str, uhub_child_location_string), DEVMETHOD(bus_child_pnpinfo_str, uhub_child_pnpinfo_string), DEVMETHOD(bus_driver_added, uhub_driver_added), DEVMETHOD_END }; static driver_t uhub_driver = { .name = "uhub", .methods = uhub_methods, .size = sizeof(struct uhub_softc) }; DRIVER_MODULE(uhub, usbus, uhub_driver, uhub_devclass, 0, 0); DRIVER_MODULE(uhub, uhub, uhub_driver, uhub_devclass, NULL, 0); MODULE_VERSION(uhub, 1); static void uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error) { struct uhub_softc *sc = usbd_xfer_softc(xfer); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: DPRINTFN(2, "\n"); /* * This is an indication that some port * has changed status. Notify the bus * event handler thread that we need * to be explored again: */ usb_needs_explore(sc->sc_udev->bus, 0); case USB_ST_SETUP: usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); break; default: /* Error */ if (xfer->error != USB_ERR_CANCELLED) { /* * Do a clear-stall. The "stall_pipe" flag * will get cleared before next callback by * the USB stack. */ usbd_xfer_set_stall(xfer); usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); } break; } } /*------------------------------------------------------------------------* * uhub_reset_tt_proc * * This function starts the TT reset USB request *------------------------------------------------------------------------*/ #if USB_HAVE_TT_SUPPORT static void uhub_reset_tt_proc(struct usb_proc_msg *_pm) { struct usb_udev_msg *pm = (void *)_pm; struct usb_device *udev = pm->udev; struct usb_hub *hub; struct uhub_softc *sc; hub = udev->hub; if (hub == NULL) return; sc = hub->hubsoftc; if (sc == NULL) return; /* Change lock */ USB_BUS_UNLOCK(udev->bus); mtx_lock(&sc->sc_mtx); /* Start transfer */ usbd_transfer_start(sc->sc_xfer[UHUB_RESET_TT_TRANSFER]); /* Change lock */ mtx_unlock(&sc->sc_mtx); USB_BUS_LOCK(udev->bus); } #endif /*------------------------------------------------------------------------* * uhub_tt_buffer_reset_async_locked * * This function queues a TT reset for the given USB device and endpoint. *------------------------------------------------------------------------*/ #if USB_HAVE_TT_SUPPORT void uhub_tt_buffer_reset_async_locked(struct usb_device *child, struct usb_endpoint *ep) { struct usb_device_request req; struct usb_device *udev; struct usb_hub *hub; struct usb_port *up; uint16_t wValue; uint8_t port; if (child == NULL || ep == NULL) return; udev = child->parent_hs_hub; port = child->hs_port_no; if (udev == NULL) return; hub = udev->hub; if ((hub == NULL) || (udev->speed != USB_SPEED_HIGH) || (child->speed != USB_SPEED_LOW && child->speed != USB_SPEED_FULL) || (child->flags.usb_mode != USB_MODE_HOST) || (port == 0) || (ep->edesc == NULL)) { /* not applicable */ return; } USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED); up = hub->ports + port - 1; if (udev->ddesc.bDeviceClass == UDCLASS_HUB && udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) port = 1; /* if we already received a clear buffer request, reset the whole TT */ if (up->req_reset_tt.bRequest != 0) { req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_RESET_TT; USETW(req.wValue, 0); req.wIndex[0] = port; req.wIndex[1] = 0; USETW(req.wLength, 0); } else { wValue = (ep->edesc->bEndpointAddress & 0xF) | ((child->address & 0x7F) << 4) | ((ep->edesc->bEndpointAddress & 0x80) << 8) | ((ep->edesc->bmAttributes & 3) << 12); req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_CLEAR_TT_BUFFER; USETW(req.wValue, wValue); req.wIndex[0] = port; req.wIndex[1] = 0; USETW(req.wLength, 0); } up->req_reset_tt = req; /* get reset transfer started */ usb_proc_msignal(USB_BUS_TT_PROC(udev->bus), &hub->tt_msg[0], &hub->tt_msg[1]); } #endif #if USB_HAVE_TT_SUPPORT static void uhub_reset_tt_callback(struct usb_xfer *xfer, usb_error_t error) { struct uhub_softc *sc; struct usb_device *udev; struct usb_port *up; uint8_t x; DPRINTF("TT buffer reset\n"); sc = usbd_xfer_softc(xfer); udev = sc->sc_udev; switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: case USB_ST_SETUP: tr_setup: USB_BUS_LOCK(udev->bus); /* find first port which needs a TT reset */ for (x = 0; x != udev->hub->nports; x++) { up = udev->hub->ports + x; if (up->req_reset_tt.bRequest == 0) continue; /* copy in the transfer */ usbd_copy_in(xfer->frbuffers, 0, &up->req_reset_tt, sizeof(up->req_reset_tt)); /* reset buffer */ memset(&up->req_reset_tt, 0, sizeof(up->req_reset_tt)); /* set length */ usbd_xfer_set_frame_len(xfer, 0, sizeof(up->req_reset_tt)); xfer->nframes = 1; USB_BUS_UNLOCK(udev->bus); usbd_transfer_submit(xfer); return; } USB_BUS_UNLOCK(udev->bus); break; default: if (error == USB_ERR_CANCELLED) break; DPRINTF("TT buffer reset failed (%s)\n", usbd_errstr(error)); goto tr_setup; } } #endif /*------------------------------------------------------------------------* * uhub_count_active_host_ports * * This function counts the number of active ports at the given speed. *------------------------------------------------------------------------*/ uint8_t uhub_count_active_host_ports(struct usb_device *udev, enum usb_dev_speed speed) { struct uhub_softc *sc; struct usb_device *child; struct usb_hub *hub; struct usb_port *up; uint8_t retval = 0; uint8_t x; if (udev == NULL) goto done; hub = udev->hub; if (hub == NULL) goto done; sc = hub->hubsoftc; if (sc == NULL) goto done; for (x = 0; x != hub->nports; x++) { up = hub->ports + x; child = usb_bus_port_get_device(udev->bus, up); if (child != NULL && child->flags.usb_mode == USB_MODE_HOST && child->speed == speed) retval++; } done: return (retval); } void uhub_explore_handle_re_enumerate(struct usb_device *child) { uint8_t do_unlock; usb_error_t err; /* check if device should be re-enumerated */ if (child->flags.usb_mode != USB_MODE_HOST) return; do_unlock = usbd_enum_lock(child); switch (child->re_enumerate_wait) { case USB_RE_ENUM_START: err = usbd_set_config_index(child, USB_UNCONFIG_INDEX); if (err != 0) { DPRINTF("Unconfigure failed: %s: Ignored.\n", usbd_errstr(err)); } if (child->parent_hub == NULL) { /* the root HUB cannot be re-enumerated */ DPRINTFN(6, "cannot reset root HUB\n"); err = 0; } else { err = usbd_req_re_enumerate(child, NULL); } if (err == 0) err = usbd_set_config_index(child, 0); if (err == 0) { err = usb_probe_and_attach(child, USB_IFACE_INDEX_ANY); } child->re_enumerate_wait = USB_RE_ENUM_DONE; break; case USB_RE_ENUM_PWR_OFF: /* get the device unconfigured */ err = usbd_set_config_index(child, USB_UNCONFIG_INDEX); if (err) { DPRINTFN(0, "Could not unconfigure " "device (ignored)\n"); } if (child->parent_hub == NULL) { /* the root HUB cannot be re-enumerated */ DPRINTFN(6, "cannot set port feature\n"); err = 0; } else { /* clear port enable */ err = usbd_req_clear_port_feature(child->parent_hub, NULL, child->port_no, UHF_PORT_ENABLE); if (err) { DPRINTFN(0, "Could not disable port " "(ignored)\n"); } } child->re_enumerate_wait = USB_RE_ENUM_DONE; break; case USB_RE_ENUM_SET_CONFIG: err = usbd_set_config_index(child, child->next_config_index); if (err != 0) { DPRINTF("Configure failed: %s: Ignored.\n", usbd_errstr(err)); } else { err = usb_probe_and_attach(child, USB_IFACE_INDEX_ANY); } child->re_enumerate_wait = USB_RE_ENUM_DONE; break; default: child->re_enumerate_wait = USB_RE_ENUM_DONE; break; } if (do_unlock) usbd_enum_unlock(child); } /*------------------------------------------------------------------------* * uhub_explore_sub - subroutine * * Return values: * 0: Success * Else: A control transaction failed *------------------------------------------------------------------------*/ static usb_error_t uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up) { struct usb_bus *bus; struct usb_device *child; uint8_t refcount; usb_error_t err; bus = sc->sc_udev->bus; err = 0; /* get driver added refcount from USB bus */ refcount = bus->driver_added_refcount; /* get device assosiated with the given port */ child = usb_bus_port_get_device(bus, up); if (child == NULL) { /* nothing to do */ goto done; } uhub_explore_handle_re_enumerate(child); /* check if probe and attach should be done */ if (child->driver_added_refcount != refcount) { child->driver_added_refcount = refcount; err = usb_probe_and_attach(child, USB_IFACE_INDEX_ANY); if (err) { goto done; } } /* start control transfer, if device mode */ if (child->flags.usb_mode == USB_MODE_DEVICE) usbd_ctrl_transfer_setup(child); /* if a HUB becomes present, do a recursive HUB explore */ if (child->hub) err = (child->hub->explore) (child); done: return (err); } /*------------------------------------------------------------------------* * uhub_read_port_status - factored out code *------------------------------------------------------------------------*/ static usb_error_t uhub_read_port_status(struct uhub_softc *sc, uint8_t portno) { struct usb_port_status ps; usb_error_t err; + if (sc->sc_usb_port_errors >= UHUB_USB_PORT_ERRORS_MAX) { + DPRINTFN(4, "port %d, HUB looks dead, too many errors\n", portno); + sc->sc_st.port_status = 0; + sc->sc_st.port_change = 0; + return (USB_ERR_TIMEOUT); + } + err = usbd_req_get_port_status( sc->sc_udev, NULL, &ps, portno); - /* update status regardless of error */ - - sc->sc_st.port_status = UGETW(ps.wPortStatus); - sc->sc_st.port_change = UGETW(ps.wPortChange); + if (err == 0) { + sc->sc_st.port_status = UGETW(ps.wPortStatus); + sc->sc_st.port_change = UGETW(ps.wPortChange); + sc->sc_usb_port_errors = 0; + } else { + sc->sc_st.port_status = 0; + sc->sc_st.port_change = 0; + sc->sc_usb_port_errors++; + } /* debugging print */ DPRINTFN(4, "port %d, wPortStatus=0x%04x, " "wPortChange=0x%04x, err=%s\n", portno, sc->sc_st.port_status, sc->sc_st.port_change, usbd_errstr(err)); return (err); } /*------------------------------------------------------------------------* * uhub_reattach_port * * Returns: * 0: Success * Else: A control transaction failed *------------------------------------------------------------------------*/ static usb_error_t uhub_reattach_port(struct uhub_softc *sc, uint8_t portno) { struct usb_device *child; struct usb_device *udev; enum usb_dev_speed speed; enum usb_hc_mode mode; usb_error_t err; uint16_t power_mask; uint8_t timeout; DPRINTF("reattaching port %d\n", portno); timeout = 0; udev = sc->sc_udev; child = usb_bus_port_get_device(udev->bus, udev->hub->ports + portno - 1); repeat: /* first clear the port connection change bit */ err = usbd_req_clear_port_feature(udev, NULL, portno, UHF_C_PORT_CONNECTION); if (err) goto error; /* check if there is a child */ if (child != NULL) { /* * Free USB device and all subdevices, if any. */ usb_free_device(child, 0); child = NULL; } /* get fresh status */ err = uhub_read_port_status(sc, portno); if (err) goto error; #if USB_HAVE_DISABLE_ENUM /* check if we should skip enumeration from this USB HUB */ if (usb_disable_enumeration != 0 || sc->sc_disable_enumeration != 0) { DPRINTF("Enumeration is disabled!\n"); goto error; } #endif /* check if nothing is connected to the port */ if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS)) goto error; /* check if there is no power on the port and print a warning */ switch (udev->speed) { case USB_SPEED_HIGH: case USB_SPEED_FULL: case USB_SPEED_LOW: power_mask = UPS_PORT_POWER; break; case USB_SPEED_SUPER: if (udev->parent_hub == NULL) power_mask = UPS_PORT_POWER; else power_mask = UPS_PORT_POWER_SS; break; default: power_mask = 0; break; } if (!(sc->sc_st.port_status & power_mask)) { DPRINTF("WARNING: strange, connected port %d " "has no power\n", portno); } /* check if the device is in Host Mode */ if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) { DPRINTF("Port %d is in Host Mode\n", portno); if (sc->sc_st.port_status & UPS_SUSPEND) { /* * NOTE: Should not get here in SuperSpeed * mode, because the HUB should report this * bit as zero. */ DPRINTF("Port %d was still " "suspended, clearing.\n", portno); err = usbd_req_clear_port_feature(udev, NULL, portno, UHF_PORT_SUSPEND); } /* USB Host Mode */ /* wait for maximum device power up time */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_powerup_delay)); /* reset port, which implies enabling it */ err = usbd_req_reset_port(udev, NULL, portno); if (err) { DPRINTFN(0, "port %d reset " "failed, error=%s\n", portno, usbd_errstr(err)); goto error; } /* get port status again, it might have changed during reset */ err = uhub_read_port_status(sc, portno); if (err) { goto error; } /* check if something changed during port reset */ if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) || (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) { if (timeout) { DPRINTFN(0, "giving up port reset " "- device vanished\n"); goto error; } timeout = 1; goto repeat; } } else { DPRINTF("Port %d is in Device Mode\n", portno); } /* * Figure out the device speed */ switch (udev->speed) { case USB_SPEED_HIGH: if (sc->sc_st.port_status & UPS_HIGH_SPEED) speed = USB_SPEED_HIGH; else if (sc->sc_st.port_status & UPS_LOW_SPEED) speed = USB_SPEED_LOW; else speed = USB_SPEED_FULL; break; case USB_SPEED_FULL: if (sc->sc_st.port_status & UPS_LOW_SPEED) speed = USB_SPEED_LOW; else speed = USB_SPEED_FULL; break; case USB_SPEED_LOW: speed = USB_SPEED_LOW; break; case USB_SPEED_SUPER: if (udev->parent_hub == NULL) { /* Root HUB - special case */ switch (sc->sc_st.port_status & UPS_OTHER_SPEED) { case 0: speed = USB_SPEED_FULL; break; case UPS_LOW_SPEED: speed = USB_SPEED_LOW; break; case UPS_HIGH_SPEED: speed = USB_SPEED_HIGH; break; default: speed = USB_SPEED_SUPER; break; } } else { speed = USB_SPEED_SUPER; } break; default: /* same speed like parent */ speed = udev->speed; break; } if (speed == USB_SPEED_SUPER) { err = usbd_req_set_hub_u1_timeout(udev, NULL, portno, 128 - (2 * udev->depth)); if (err) { DPRINTFN(0, "port %d U1 timeout " "failed, error=%s\n", portno, usbd_errstr(err)); } err = usbd_req_set_hub_u2_timeout(udev, NULL, portno, 128 - (2 * udev->depth)); if (err) { DPRINTFN(0, "port %d U2 timeout " "failed, error=%s\n", portno, usbd_errstr(err)); } } /* * Figure out the device mode * * NOTE: This part is currently FreeBSD specific. */ if (udev->parent_hub != NULL) { /* inherit mode from the parent HUB */ mode = udev->parent_hub->flags.usb_mode; } else if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE) mode = USB_MODE_DEVICE; else mode = USB_MODE_HOST; /* need to create a new child */ child = usb_alloc_device(sc->sc_dev, udev->bus, udev, udev->depth + 1, portno - 1, portno, speed, mode); if (child == NULL) { DPRINTFN(0, "could not allocate new device\n"); goto error; } return (0); /* success */ error: if (child != NULL) { /* * Free USB device and all subdevices, if any. */ usb_free_device(child, 0); child = NULL; } if (err == 0) { if (sc->sc_st.port_status & UPS_PORT_ENABLED) { err = usbd_req_clear_port_feature( sc->sc_udev, NULL, portno, UHF_PORT_ENABLE); } } if (err) { DPRINTFN(0, "device problem (%s), " "disabling port %d\n", usbd_errstr(err), portno); } return (err); } /*------------------------------------------------------------------------* * usb_device_20_compatible * * Returns: * 0: HUB does not support suspend and resume * Else: HUB supports suspend and resume *------------------------------------------------------------------------*/ static uint8_t usb_device_20_compatible(struct usb_device *udev) { if (udev == NULL) return (0); switch (udev->speed) { case USB_SPEED_LOW: case USB_SPEED_FULL: case USB_SPEED_HIGH: return (1); default: return (0); } } /*------------------------------------------------------------------------* * uhub_suspend_resume_port * * Returns: * 0: Success * Else: A control transaction failed *------------------------------------------------------------------------*/ static usb_error_t uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno) { struct usb_device *child; struct usb_device *udev; uint8_t is_suspend; usb_error_t err; DPRINTF("port %d\n", portno); udev = sc->sc_udev; child = usb_bus_port_get_device(udev->bus, udev->hub->ports + portno - 1); /* first clear the port suspend change bit */ if (usb_device_20_compatible(udev)) { err = usbd_req_clear_port_feature(udev, NULL, portno, UHF_C_PORT_SUSPEND); } else { err = usbd_req_clear_port_feature(udev, NULL, portno, UHF_C_PORT_LINK_STATE); } if (err) { DPRINTF("clearing suspend failed.\n"); goto done; } /* get fresh status */ err = uhub_read_port_status(sc, portno); if (err) { DPRINTF("reading port status failed.\n"); goto done; } /* convert current state */ if (usb_device_20_compatible(udev)) { if (sc->sc_st.port_status & UPS_SUSPEND) { is_suspend = 1; } else { is_suspend = 0; } } else { switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) { case UPS_PORT_LS_U3: is_suspend = 1; break; case UPS_PORT_LS_SS_INA: usbd_req_warm_reset_port(udev, NULL, portno); is_suspend = 0; break; default: is_suspend = 0; break; } } DPRINTF("suspended=%u\n", is_suspend); /* do the suspend or resume */ if (child) { /* * This code handle two cases: 1) Host Mode - we can only * receive resume here 2) Device Mode - we can receive * suspend and resume here */ if (is_suspend == 0) usb_dev_resume_peer(child); else if (child->flags.usb_mode == USB_MODE_DEVICE) usb_dev_suspend_peer(child); } done: return (err); } /*------------------------------------------------------------------------* * uhub_root_interrupt * * This function is called when a Root HUB interrupt has * happened. "ptr" and "len" makes up the Root HUB interrupt * packet. This function is called having the "bus_mtx" locked. *------------------------------------------------------------------------*/ void uhub_root_intr(struct usb_bus *bus, const uint8_t *ptr, uint8_t len) { USB_BUS_LOCK_ASSERT(bus, MA_OWNED); usb_needs_explore(bus, 0); } static uint8_t uhub_is_too_deep(struct usb_device *udev) { switch (udev->speed) { case USB_SPEED_FULL: case USB_SPEED_LOW: case USB_SPEED_HIGH: if (udev->depth > USB_HUB_MAX_DEPTH) return (1); break; case USB_SPEED_SUPER: if (udev->depth > USB_SS_HUB_DEPTH_MAX) return (1); break; default: break; } return (0); } /*------------------------------------------------------------------------* * uhub_explore * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ static usb_error_t uhub_explore(struct usb_device *udev) { struct usb_hub *hub; struct uhub_softc *sc; struct usb_port *up; usb_error_t err; uint8_t portno; uint8_t x; uint8_t do_unlock; hub = udev->hub; sc = hub->hubsoftc; DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address); /* ignore devices that are too deep */ if (uhub_is_too_deep(udev)) return (USB_ERR_TOO_DEEP); /* check if device is suspended */ if (udev->flags.self_suspended) { /* need to wait until the child signals resume */ DPRINTF("Device is suspended!\n"); return (0); } /* * Make sure we don't race against user-space applications * like LibUSB: */ do_unlock = usbd_enum_lock(udev); for (x = 0; x != hub->nports; x++) { up = hub->ports + x; portno = x + 1; err = uhub_read_port_status(sc, portno); if (err) { /* most likely the HUB is gone */ break; } if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) { DPRINTF("Overcurrent on port %u.\n", portno); err = usbd_req_clear_port_feature( udev, NULL, portno, UHF_C_PORT_OVER_CURRENT); if (err) { /* most likely the HUB is gone */ break; } } if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) { /* * Fake a connect status change so that the * status gets checked initially! */ sc->sc_st.port_change |= UPS_C_CONNECT_STATUS; } if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) { err = usbd_req_clear_port_feature( udev, NULL, portno, UHF_C_PORT_ENABLE); if (err) { /* most likely the HUB is gone */ break; } if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { /* * Ignore the port error if the device * has vanished ! */ } else if (sc->sc_st.port_status & UPS_PORT_ENABLED) { DPRINTFN(0, "illegal enable change, " "port %d\n", portno); } else { if (up->restartcnt == USB_RESTART_MAX) { /* XXX could try another speed ? */ DPRINTFN(0, "port error, giving up " "port %d\n", portno); } else { sc->sc_st.port_change |= UPS_C_CONNECT_STATUS; up->restartcnt++; } } } if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { err = uhub_reattach_port(sc, portno); if (err) { /* most likely the HUB is gone */ break; } } if (sc->sc_st.port_change & (UPS_C_SUSPEND | UPS_C_PORT_LINK_STATE)) { err = uhub_suspend_resume_port(sc, portno); if (err) { /* most likely the HUB is gone */ break; } } err = uhub_explore_sub(sc, up); if (err) { /* no device(s) present */ continue; } /* explore succeeded - reset restart counter */ up->restartcnt = 0; } if (do_unlock) usbd_enum_unlock(udev); /* initial status checked */ sc->sc_flags |= UHUB_FLAG_DID_EXPLORE; /* return success */ return (USB_ERR_NORMAL_COMPLETION); } static int uhub_probe(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); if (uaa->usb_mode != USB_MODE_HOST) return (ENXIO); /* * The subclass for USB HUBs is currently ignored because it * is 0 for some and 1 for others. */ if (uaa->info.bConfigIndex == 0 && uaa->info.bDeviceClass == UDCLASS_HUB) return (0); return (ENXIO); } /* NOTE: The information returned by this function can be wrong. */ usb_error_t uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt) { struct usb_hub_descriptor hubdesc20; struct usb_hub_ss_descriptor hubdesc30; usb_error_t err; uint8_t nports; uint8_t tt; if (udev->ddesc.bDeviceClass != UDCLASS_HUB) return (USB_ERR_INVAL); nports = 0; tt = 0; switch (udev->speed) { case USB_SPEED_LOW: case USB_SPEED_FULL: case USB_SPEED_HIGH: /* assuming that there is one port */ err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); if (err) { DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," "error=%s\n", usbd_errstr(err)); break; } nports = hubdesc20.bNbrPorts; if (nports > 127) nports = 127; if (udev->speed == USB_SPEED_HIGH) tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3; break; case USB_SPEED_SUPER: err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); if (err) { DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," "error=%s\n", usbd_errstr(err)); break; } nports = hubdesc30.bNbrPorts; if (nports > 16) nports = 16; break; default: err = USB_ERR_INVAL; break; } if (pnports != NULL) *pnports = nports; if (ptt != NULL) *ptt = tt; return (err); } static int uhub_attach(device_t dev) { struct uhub_softc *sc = device_get_softc(dev); struct usb_attach_arg *uaa = device_get_ivars(dev); struct usb_device *udev = uaa->device; struct usb_device *parent_hub = udev->parent_hub; struct usb_hub *hub; struct usb_hub_descriptor hubdesc20; struct usb_hub_ss_descriptor hubdesc30; #if USB_HAVE_DISABLE_ENUM struct sysctl_ctx_list *sysctl_ctx; struct sysctl_oid *sysctl_tree; #endif uint16_t pwrdly; uint16_t nports; uint8_t x; uint8_t portno; uint8_t removable; uint8_t iface_index; usb_error_t err; sc->sc_udev = udev; sc->sc_dev = dev; mtx_init(&sc->sc_mtx, "USB HUB mutex", NULL, MTX_DEF); device_set_usb_desc(dev); DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, " "parent->selfpowered=%d\n", udev->depth, udev->flags.self_powered, parent_hub, parent_hub ? parent_hub->flags.self_powered : 0); if (uhub_is_too_deep(udev)) { DPRINTFN(0, "HUB at depth %d, " "exceeds maximum. HUB ignored\n", (int)udev->depth); goto error; } if (!udev->flags.self_powered && parent_hub && !parent_hub->flags.self_powered) { DPRINTFN(0, "Bus powered HUB connected to " "bus powered HUB. HUB ignored\n"); goto error; } if (UHUB_IS_MULTI_TT(sc)) { err = usbd_set_alt_interface_index(udev, 0, 1); if (err) { device_printf(dev, "MTT could not be enabled\n"); goto error; } device_printf(dev, "MTT enabled\n"); } /* get HUB descriptor */ DPRINTFN(2, "Getting HUB descriptor\n"); switch (udev->speed) { case USB_SPEED_LOW: case USB_SPEED_FULL: case USB_SPEED_HIGH: /* assuming that there is one port */ err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); if (err) { DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," "error=%s\n", usbd_errstr(err)); goto error; } /* get number of ports */ nports = hubdesc20.bNbrPorts; /* get power delay */ pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + usb_extra_power_up_time); /* get complete HUB descriptor */ if (nports >= 8) { /* check number of ports */ if (nports > 127) { DPRINTFN(0, "Invalid number of USB 2.0 ports," "error=%s\n", usbd_errstr(err)); goto error; } /* get complete HUB descriptor */ err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports); if (err) { DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," "error=%s\n", usbd_errstr(err)); goto error; } if (hubdesc20.bNbrPorts != nports) { DPRINTFN(0, "Number of ports changed\n"); goto error; } } break; case USB_SPEED_SUPER: if (udev->parent_hub != NULL) { err = usbd_req_set_hub_depth(udev, NULL, udev->depth - 1); if (err) { DPRINTFN(0, "Setting USB 3.0 HUB depth failed," "error=%s\n", usbd_errstr(err)); goto error; } } err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); if (err) { DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," "error=%s\n", usbd_errstr(err)); goto error; } /* get number of ports */ nports = hubdesc30.bNbrPorts; /* get power delay */ pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + usb_extra_power_up_time); /* get complete HUB descriptor */ if (nports >= 8) { /* check number of ports */ if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) { DPRINTFN(0, "Invalid number of USB 3.0 ports," "error=%s\n", usbd_errstr(err)); goto error; } /* get complete HUB descriptor */ err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports); if (err) { DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," "error=%s\n", usbd_errstr(err)); goto error; } if (hubdesc30.bNbrPorts != nports) { DPRINTFN(0, "Number of ports changed\n"); goto error; } } break; default: DPRINTF("Assuming HUB has only one port\n"); /* default number of ports */ nports = 1; /* default power delay */ pwrdly = ((10 * UHD_PWRON_FACTOR) + usb_extra_power_up_time); break; } if (nports == 0) { DPRINTFN(0, "portless HUB\n"); goto error; } if (nports > USB_MAX_PORTS) { DPRINTF("Port limit exceeded\n"); goto error; } #if (USB_HAVE_FIXED_PORT == 0) hub = malloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports), M_USBDEV, M_WAITOK | M_ZERO); if (hub == NULL) goto error; #else hub = &sc->sc_hub; #endif udev->hub = hub; /* initialize HUB structure */ hub->hubsoftc = sc; hub->explore = &uhub_explore; hub->nports = nports; hub->hubudev = udev; #if USB_HAVE_TT_SUPPORT hub->tt_msg[0].hdr.pm_callback = &uhub_reset_tt_proc; hub->tt_msg[0].udev = udev; hub->tt_msg[1].hdr.pm_callback = &uhub_reset_tt_proc; hub->tt_msg[1].udev = udev; #endif /* if self powered hub, give ports maximum current */ if (udev->flags.self_powered) { hub->portpower = USB_MAX_POWER; } else { hub->portpower = USB_MIN_POWER; } /* set up interrupt pipe */ iface_index = 0; if (udev->parent_hub == NULL) { /* root HUB is special */ err = 0; } else { /* normal HUB */ err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer, uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_mtx); } if (err) { DPRINTFN(0, "cannot setup interrupt transfer, " "errstr=%s\n", usbd_errstr(err)); goto error; } /* wait with power off for a while */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME)); #if USB_HAVE_DISABLE_ENUM /* Add device sysctls */ sysctl_ctx = device_get_sysctl_ctx(dev); sysctl_tree = device_get_sysctl_tree(dev); if (sysctl_ctx != NULL && sysctl_tree != NULL) { (void) SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "disable_enumeration", CTLFLAG_RWTUN, &sc->sc_disable_enumeration, 0, "Set to disable enumeration on this USB HUB."); (void) SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "disable_port_power", CTLFLAG_RWTUN, &sc->sc_disable_port_power, 0, "Set to disable USB port power on this USB HUB."); } #endif /* * To have the best chance of success we do things in the exact same * order as Windoze98. This should not be necessary, but some * devices do not follow the USB specs to the letter. * * These are the events on the bus when a hub is attached: * Get device and config descriptors (see attach code) * Get hub descriptor (see above) * For all ports * turn on power * wait for power to become stable * (all below happens in explore code) * For all ports * clear C_PORT_CONNECTION * For all ports * get port status * if device connected * wait 100 ms * turn on reset * wait * clear C_PORT_RESET * get port status * proceed with device attachment */ /* XXX should check for none, individual, or ganged power? */ removable = 0; for (x = 0; x != nports; x++) { /* set up data structures */ struct usb_port *up = hub->ports + x; up->device_index = 0; up->restartcnt = 0; portno = x + 1; /* check if port is removable */ switch (udev->speed) { case USB_SPEED_LOW: case USB_SPEED_FULL: case USB_SPEED_HIGH: if (!UHD_NOT_REMOV(&hubdesc20, portno)) removable++; break; case USB_SPEED_SUPER: if (!UHD_NOT_REMOV(&hubdesc30, portno)) removable++; break; default: DPRINTF("Assuming removable port\n"); removable++; break; } if (err == 0) { #if USB_HAVE_DISABLE_ENUM /* check if we should disable USB port power or not */ if (usb_disable_port_power != 0 || sc->sc_disable_port_power != 0) { /* turn the power off */ DPRINTFN(2, "Turning port %d power off\n", portno); err = usbd_req_clear_port_feature(udev, NULL, portno, UHF_PORT_POWER); } else { #endif /* turn the power on */ DPRINTFN(2, "Turning port %d power on\n", portno); err = usbd_req_set_port_feature(udev, NULL, portno, UHF_PORT_POWER); #if USB_HAVE_DISABLE_ENUM } #endif } if (err != 0) { DPRINTFN(0, "port %d power on or off failed, %s\n", portno, usbd_errstr(err)); } DPRINTF("turn on port %d power\n", portno); /* wait for stable power */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly)); } device_printf(dev, "%d port%s with %d " "removable, %s powered\n", nports, (nports != 1) ? "s" : "", removable, udev->flags.self_powered ? "self" : "bus"); /* Start the interrupt endpoint, if any */ mtx_lock(&sc->sc_mtx); usbd_transfer_start(sc->sc_xfer[UHUB_INTR_TRANSFER]); mtx_unlock(&sc->sc_mtx); /* Enable automatic power save on all USB HUBs */ usbd_set_power_mode(udev, USB_POWER_MODE_SAVE); return (0); error: usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); #if (USB_HAVE_FIXED_PORT == 0) free(udev->hub, M_USBDEV); #endif udev->hub = NULL; mtx_destroy(&sc->sc_mtx); return (ENXIO); } /* * Called from process context when the hub is gone. * Detach all devices on active ports. */ static int uhub_detach(device_t dev) { struct uhub_softc *sc = device_get_softc(dev); struct usb_hub *hub = sc->sc_udev->hub; struct usb_bus *bus = sc->sc_udev->bus; struct usb_device *child; uint8_t x; if (hub == NULL) /* must be partially working */ return (0); /* Make sure interrupt transfer is gone. */ usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); /* Detach all ports */ for (x = 0; x != hub->nports; x++) { child = usb_bus_port_get_device(bus, hub->ports + x); if (child == NULL) { continue; } /* * Free USB device and all subdevices, if any. */ usb_free_device(child, 0); } #if USB_HAVE_TT_SUPPORT /* Make sure our TT messages are not queued anywhere */ USB_BUS_LOCK(bus); usb_proc_mwait(USB_BUS_TT_PROC(bus), &hub->tt_msg[0], &hub->tt_msg[1]); USB_BUS_UNLOCK(bus); #endif #if (USB_HAVE_FIXED_PORT == 0) free(hub, M_USBDEV); #endif sc->sc_udev->hub = NULL; mtx_destroy(&sc->sc_mtx); return (0); } static int uhub_suspend(device_t dev) { DPRINTF("\n"); /* Sub-devices are not suspended here! */ return (0); } static int uhub_resume(device_t dev) { DPRINTF("\n"); /* Sub-devices are not resumed here! */ return (0); } static void uhub_driver_added(device_t dev, driver_t *driver) { usb_needs_explore_all(); } struct hub_result { struct usb_device *udev; uint8_t portno; uint8_t iface_index; }; static void uhub_find_iface_index(struct usb_hub *hub, device_t child, struct hub_result *res) { struct usb_interface *iface; struct usb_device *udev; uint8_t nports; uint8_t x; uint8_t i; nports = hub->nports; for (x = 0; x != nports; x++) { udev = usb_bus_port_get_device(hub->hubudev->bus, hub->ports + x); if (!udev) { continue; } for (i = 0; i != USB_IFACE_MAX; i++) { iface = usbd_get_iface(udev, i); if (iface && (iface->subdev == child)) { res->iface_index = i; res->udev = udev; res->portno = x + 1; return; } } } res->iface_index = 0; res->udev = NULL; res->portno = 0; } static int uhub_child_location_string(device_t parent, device_t child, char *buf, size_t buflen) { struct uhub_softc *sc; struct usb_hub *hub; struct hub_result res; if (!device_is_attached(parent)) { if (buflen) buf[0] = 0; return (0); } sc = device_get_softc(parent); hub = sc->sc_udev->hub; mtx_lock(&Giant); uhub_find_iface_index(hub, child, &res); if (!res.udev) { DPRINTF("device not on hub\n"); if (buflen) { buf[0] = '\0'; } goto done; } snprintf(buf, buflen, "bus=%u hubaddr=%u port=%u devaddr=%u" " interface=%u" #if USB_HAVE_UGEN " ugen=%s" #endif , device_get_unit(res.udev->bus->bdev) , (res.udev->parent_hub != NULL) ? res.udev->parent_hub->device_index : 0 , res.portno, res.udev->device_index, res.iface_index #if USB_HAVE_UGEN , res.udev->ugen_name #endif ); done: mtx_unlock(&Giant); return (0); } static int uhub_child_pnpinfo_string(device_t parent, device_t child, char *buf, size_t buflen) { struct uhub_softc *sc; struct usb_hub *hub; struct usb_interface *iface; struct hub_result res; if (!device_is_attached(parent)) { if (buflen) buf[0] = 0; return (0); } sc = device_get_softc(parent); hub = sc->sc_udev->hub; mtx_lock(&Giant); uhub_find_iface_index(hub, child, &res); if (!res.udev) { DPRINTF("device not on hub\n"); if (buflen) { buf[0] = '\0'; } goto done; } iface = usbd_get_iface(res.udev, res.iface_index); if (iface && iface->idesc) { snprintf(buf, buflen, "vendor=0x%04x product=0x%04x " "devclass=0x%02x devsubclass=0x%02x " "devproto=0x%02x " "sernum=\"%s\" " "release=0x%04x " "mode=%s " "intclass=0x%02x intsubclass=0x%02x " "intprotocol=0x%02x" "%s%s", UGETW(res.udev->ddesc.idVendor), UGETW(res.udev->ddesc.idProduct), res.udev->ddesc.bDeviceClass, res.udev->ddesc.bDeviceSubClass, res.udev->ddesc.bDeviceProtocol, usb_get_serial(res.udev), UGETW(res.udev->ddesc.bcdDevice), (res.udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", iface->idesc->bInterfaceClass, iface->idesc->bInterfaceSubClass, iface->idesc->bInterfaceProtocol, iface->pnpinfo ? " " : "", iface->pnpinfo ? iface->pnpinfo : ""); } else { if (buflen) { buf[0] = '\0'; } goto done; } done: mtx_unlock(&Giant); return (0); } /* * The USB Transaction Translator: * =============================== * * When doing LOW- and FULL-speed USB transfers across a HIGH-speed * USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT * USB transfers. To utilize bandwidth dynamically the "scatter and * gather" principle must be applied. This means that bandwidth must * be divided into equal parts of bandwidth. With regard to USB all * data is transferred in smaller packets with length * "wMaxPacketSize". The problem however is that "wMaxPacketSize" is * not a constant! * * The bandwidth scheduler which I have implemented will simply pack * the USB transfers back to back until there is no more space in the * schedule. Out of the 8 microframes which the USB 2.0 standard * provides, only 6 are available for non-HIGH-speed devices. I have * reserved the first 4 microframes for ISOCHRONOUS transfers. The * last 2 microframes I have reserved for INTERRUPT transfers. Without * this division, it is very difficult to allocate and free bandwidth * dynamically. * * NOTE about the Transaction Translator in USB HUBs: * * USB HUBs have a very simple Transaction Translator, that will * simply pipeline all the SPLIT transactions. That means that the * transactions will be executed in the order they are queued! * */ /*------------------------------------------------------------------------* * usb_intr_find_best_slot * * Return value: * The best Transaction Translation slot for an interrupt endpoint. *------------------------------------------------------------------------*/ static uint8_t usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start, uint8_t end, uint8_t mask) { usb_size_t min = (usb_size_t)-1; usb_size_t sum; uint8_t x; uint8_t y; uint8_t z; y = 0; /* find the last slot with lesser used bandwidth */ for (x = start; x < end; x++) { sum = 0; /* compute sum of bandwidth */ for (z = x; z < end; z++) { if (mask & (1U << (z - x))) sum += ptr[z]; } /* check if the current multi-slot is more optimal */ if (min >= sum) { min = sum; y = x; } /* check if the mask is about to be shifted out */ if (mask & (1U << (end - 1 - x))) break; } return (y); } /*------------------------------------------------------------------------* * usb_hs_bandwidth_adjust * * This function will update the bandwidth usage for the microframe * having index "slot" by "len" bytes. "len" can be negative. If the * "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX" * the "slot" argument will be replaced by the slot having least used * bandwidth. The "mask" argument is used for multi-slot allocations. * * Returns: * The slot in which the bandwidth update was done: 0..7 *------------------------------------------------------------------------*/ static uint8_t usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len, uint8_t slot, uint8_t mask) { struct usb_bus *bus = udev->bus; struct usb_hub *hub; enum usb_dev_speed speed; uint8_t x; USB_BUS_LOCK_ASSERT(bus, MA_OWNED); speed = usbd_get_speed(udev); switch (speed) { case USB_SPEED_LOW: case USB_SPEED_FULL: if (speed == USB_SPEED_LOW) { len *= 8; } /* * The Host Controller Driver should have * performed checks so that the lookup * below does not result in a NULL pointer * access. */ hub = udev->parent_hs_hub->hub; if (slot >= USB_HS_MICRO_FRAMES_MAX) { slot = usb_intr_find_best_slot(hub->uframe_usage, USB_FS_ISOC_UFRAME_MAX, 6, mask); } for (x = slot; x < 8; x++) { if (mask & (1U << (x - slot))) { hub->uframe_usage[x] += len; bus->uframe_usage[x] += len; } } break; default: if (slot >= USB_HS_MICRO_FRAMES_MAX) { slot = usb_intr_find_best_slot(bus->uframe_usage, 0, USB_HS_MICRO_FRAMES_MAX, mask); } for (x = slot; x < 8; x++) { if (mask & (1U << (x - slot))) { bus->uframe_usage[x] += len; } } break; } return (slot); } /*------------------------------------------------------------------------* * usb_hs_bandwidth_alloc * * This function is a wrapper function for "usb_hs_bandwidth_adjust()". *------------------------------------------------------------------------*/ void usb_hs_bandwidth_alloc(struct usb_xfer *xfer) { struct usb_device *udev; uint8_t slot; uint8_t mask; uint8_t speed; udev = xfer->xroot->udev; if (udev->flags.usb_mode != USB_MODE_HOST) return; /* not supported */ xfer->endpoint->refcount_bw++; if (xfer->endpoint->refcount_bw != 1) return; /* already allocated */ speed = usbd_get_speed(udev); switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { case UE_INTERRUPT: /* allocate a microframe slot */ mask = 0x01; slot = usb_hs_bandwidth_adjust(udev, xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); xfer->endpoint->usb_uframe = slot; xfer->endpoint->usb_smask = mask << slot; if ((speed != USB_SPEED_FULL) && (speed != USB_SPEED_LOW)) { xfer->endpoint->usb_cmask = 0x00 ; } else { xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE; } break; case UE_ISOCHRONOUS: switch (usbd_xfer_get_fps_shift(xfer)) { case 0: mask = 0xFF; break; case 1: mask = 0x55; break; case 2: mask = 0x11; break; default: mask = 0x01; break; } /* allocate a microframe multi-slot */ slot = usb_hs_bandwidth_adjust(udev, xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); xfer->endpoint->usb_uframe = slot; xfer->endpoint->usb_cmask = 0; xfer->endpoint->usb_smask = mask << slot; break; default: xfer->endpoint->usb_uframe = 0; xfer->endpoint->usb_cmask = 0; xfer->endpoint->usb_smask = 0; break; } DPRINTFN(11, "slot=%d, mask=0x%02x\n", xfer->endpoint->usb_uframe, xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe); } /*------------------------------------------------------------------------* * usb_hs_bandwidth_free * * This function is a wrapper function for "usb_hs_bandwidth_adjust()". *------------------------------------------------------------------------*/ void usb_hs_bandwidth_free(struct usb_xfer *xfer) { struct usb_device *udev; uint8_t slot; uint8_t mask; udev = xfer->xroot->udev; if (udev->flags.usb_mode != USB_MODE_HOST) return; /* not supported */ xfer->endpoint->refcount_bw--; if (xfer->endpoint->refcount_bw != 0) return; /* still allocated */ switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { case UE_INTERRUPT: case UE_ISOCHRONOUS: slot = xfer->endpoint->usb_uframe; mask = xfer->endpoint->usb_smask; /* free microframe slot(s): */ usb_hs_bandwidth_adjust(udev, -xfer->max_frame_size, slot, mask >> slot); DPRINTFN(11, "slot=%d, mask=0x%02x\n", slot, mask >> slot); xfer->endpoint->usb_uframe = 0; xfer->endpoint->usb_cmask = 0; xfer->endpoint->usb_smask = 0; break; default: break; } } /*------------------------------------------------------------------------* * usb_isoc_time_expand * * This function will expand the time counter from 7-bit to 16-bit. * * Returns: * 16-bit isochronous time counter. *------------------------------------------------------------------------*/ uint16_t usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr) { uint16_t rem; USB_BUS_LOCK_ASSERT(bus, MA_OWNED); rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1); isoc_time_curr &= (USB_ISOC_TIME_MAX - 1); if (isoc_time_curr < rem) { /* the time counter wrapped around */ bus->isoc_time_last += USB_ISOC_TIME_MAX; } /* update the remainder */ bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1); bus->isoc_time_last |= isoc_time_curr; return (bus->isoc_time_last); } /*------------------------------------------------------------------------* * usbd_fs_isoc_schedule_alloc_slot * * This function will allocate bandwidth for an isochronous FULL speed * transaction in the FULL speed schedule. * * Returns: * <8: Success * Else: Error *------------------------------------------------------------------------*/ #if USB_HAVE_TT_SUPPORT uint8_t usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time) { struct usb_xfer *xfer; struct usb_xfer *pipe_xfer; struct usb_bus *bus; usb_frlength_t len; usb_frlength_t data_len; uint16_t delta; uint16_t slot; uint8_t retval; data_len = 0; slot = 0; bus = isoc_xfer->xroot->bus; TAILQ_FOREACH(xfer, &bus->intr_q.head, wait_entry) { /* skip self, if any */ if (xfer == isoc_xfer) continue; /* check if this USB transfer is going through the same TT */ if (xfer->xroot->udev->parent_hs_hub != isoc_xfer->xroot->udev->parent_hs_hub) { continue; } if ((isoc_xfer->xroot->udev->parent_hs_hub-> ddesc.bDeviceProtocol == UDPROTO_HSHUBMTT) && (xfer->xroot->udev->hs_port_no != isoc_xfer->xroot->udev->hs_port_no)) { continue; } if (xfer->endpoint->methods != isoc_xfer->endpoint->methods) continue; /* check if isoc_time is part of this transfer */ delta = xfer->isoc_time_complete - isoc_time; if (delta > 0 && delta <= xfer->nframes) { delta = xfer->nframes - delta; len = xfer->frlengths[delta]; len += 8; len *= 7; len /= 6; data_len += len; } /* * Check double buffered transfers. Only stream ID * equal to zero is valid here! */ TAILQ_FOREACH(pipe_xfer, &xfer->endpoint->endpoint_q[0].head, wait_entry) { /* skip self, if any */ if (pipe_xfer == isoc_xfer) continue; /* check if isoc_time is part of this transfer */ delta = pipe_xfer->isoc_time_complete - isoc_time; if (delta > 0 && delta <= pipe_xfer->nframes) { delta = pipe_xfer->nframes - delta; len = pipe_xfer->frlengths[delta]; len += 8; len *= 7; len /= 6; data_len += len; } } } while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) { data_len -= USB_FS_BYTES_PER_HS_UFRAME; slot++; } /* check for overflow */ if (slot >= USB_FS_ISOC_UFRAME_MAX) return (255); retval = slot; delta = isoc_xfer->isoc_time_complete - isoc_time; if (delta > 0 && delta <= isoc_xfer->nframes) { delta = isoc_xfer->nframes - delta; len = isoc_xfer->frlengths[delta]; len += 8; len *= 7; len /= 6; data_len += len; } while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) { data_len -= USB_FS_BYTES_PER_HS_UFRAME; slot++; } /* check for overflow */ if (slot >= USB_FS_ISOC_UFRAME_MAX) return (255); return (retval); } #endif /*------------------------------------------------------------------------* * usb_bus_port_get_device * * This function is NULL safe. *------------------------------------------------------------------------*/ struct usb_device * usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up) { if ((bus == NULL) || (up == NULL)) { /* be NULL safe */ return (NULL); } if (up->device_index == 0) { /* nothing to do */ return (NULL); } return (bus->devices[up->device_index]); } /*------------------------------------------------------------------------* * usb_bus_port_set_device * * This function is NULL safe. *------------------------------------------------------------------------*/ void usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up, struct usb_device *udev, uint8_t device_index) { if (bus == NULL) { /* be NULL safe */ return; } /* * There is only one case where we don't * have an USB port, and that is the Root Hub! */ if (up) { if (udev) { up->device_index = device_index; } else { device_index = up->device_index; up->device_index = 0; } } /* * Make relationships to our new device */ if (device_index != 0) { #if USB_HAVE_UGEN mtx_lock(&usb_ref_lock); #endif bus->devices[device_index] = udev; #if USB_HAVE_UGEN mtx_unlock(&usb_ref_lock); #endif } /* * Debug print */ DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev); } /*------------------------------------------------------------------------* * usb_needs_explore * * This functions is called when the USB event thread needs to run. *------------------------------------------------------------------------*/ void usb_needs_explore(struct usb_bus *bus, uint8_t do_probe) { uint8_t do_unlock; DPRINTF("\n"); if (cold != 0) { DPRINTF("Cold\n"); return; } if (bus == NULL) { DPRINTF("No bus pointer!\n"); return; } if ((bus->devices == NULL) || (bus->devices[USB_ROOT_HUB_ADDR] == NULL)) { DPRINTF("No root HUB\n"); return; } if (mtx_owned(&bus->bus_mtx)) { do_unlock = 0; } else { USB_BUS_LOCK(bus); do_unlock = 1; } if (do_probe) { bus->do_probe = 1; } if (usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), &bus->explore_msg[0], &bus->explore_msg[1])) { /* ignore */ } if (do_unlock) { USB_BUS_UNLOCK(bus); } } /*------------------------------------------------------------------------* * usb_needs_explore_all * * This function is called whenever a new driver is loaded and will * cause that all USB busses are re-explored. *------------------------------------------------------------------------*/ void usb_needs_explore_all(void) { struct usb_bus *bus; devclass_t dc; device_t dev; int max; DPRINTFN(3, "\n"); dc = usb_devclass_ptr; if (dc == NULL) { DPRINTFN(0, "no devclass\n"); return; } /* * Explore all USB busses in parallel. */ max = devclass_get_maxunit(dc); while (max >= 0) { dev = devclass_get_device(dc, max); if (dev) { bus = device_get_softc(dev); if (bus) { usb_needs_explore(bus, 1); } } max--; } } /*------------------------------------------------------------------------* * usb_needs_explore_init * * This function will ensure that the USB controllers are not enumerated * until the "cold" variable is cleared. *------------------------------------------------------------------------*/ static void usb_needs_explore_init(void *arg) { /* * The cold variable should be cleared prior to this function * being called: */ if (cold == 0) usb_needs_explore_all(); else DPRINTFN(-1, "Cold variable is still set!\n"); } SYSINIT(usb_needs_explore_init, SI_SUB_KICK_SCHEDULER, SI_ORDER_SECOND, usb_needs_explore_init, NULL); /*------------------------------------------------------------------------* * usb_bus_power_update * * This function will ensure that all USB devices on the given bus are * properly suspended or resumed according to the device transfer * state. *------------------------------------------------------------------------*/ #if USB_HAVE_POWERD void usb_bus_power_update(struct usb_bus *bus) { usb_needs_explore(bus, 0 /* no probe */ ); } #endif /*------------------------------------------------------------------------* * usbd_transfer_power_ref * * This function will modify the power save reference counts and * wakeup the USB device associated with the given USB transfer, if * needed. *------------------------------------------------------------------------*/ #if USB_HAVE_POWERD void usbd_transfer_power_ref(struct usb_xfer *xfer, int val) { static const usb_power_mask_t power_mask[4] = { [UE_CONTROL] = USB_HW_POWER_CONTROL, [UE_BULK] = USB_HW_POWER_BULK, [UE_INTERRUPT] = USB_HW_POWER_INTERRUPT, [UE_ISOCHRONOUS] = USB_HW_POWER_ISOC, }; struct usb_device *udev; uint8_t needs_explore; uint8_t needs_hw_power; uint8_t xfer_type; udev = xfer->xroot->udev; if (udev->device_index == USB_ROOT_HUB_ADDR) { /* no power save for root HUB */ return; } USB_BUS_LOCK(udev->bus); xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE; udev->pwr_save.last_xfer_time = ticks; udev->pwr_save.type_refs[xfer_type] += val; if (xfer->flags_int.control_xfr) { udev->pwr_save.read_refs += val; if (xfer->flags_int.usb_mode == USB_MODE_HOST) { /* * It is not allowed to suspend during a * control transfer: */ udev->pwr_save.write_refs += val; } } else if (USB_GET_DATA_ISREAD(xfer)) { udev->pwr_save.read_refs += val; } else { udev->pwr_save.write_refs += val; } if (val > 0) { if (udev->flags.self_suspended) needs_explore = usb_peer_should_wakeup(udev); else needs_explore = 0; if (!(udev->bus->hw_power_state & power_mask[xfer_type])) { DPRINTF("Adding type %u to power state\n", xfer_type); udev->bus->hw_power_state |= power_mask[xfer_type]; needs_hw_power = 1; } else { needs_hw_power = 0; } } else { needs_explore = 0; needs_hw_power = 0; } USB_BUS_UNLOCK(udev->bus); if (needs_explore) { DPRINTF("update\n"); usb_bus_power_update(udev->bus); } else if (needs_hw_power) { DPRINTF("needs power\n"); if (udev->bus->methods->set_hw_power != NULL) { (udev->bus->methods->set_hw_power) (udev->bus); } } } #endif /*------------------------------------------------------------------------* * usb_peer_should_wakeup * * This function returns non-zero if the current device should wake up. *------------------------------------------------------------------------*/ static uint8_t usb_peer_should_wakeup(struct usb_device *udev) { return (((udev->power_mode == USB_POWER_MODE_ON) && (udev->flags.usb_mode == USB_MODE_HOST)) || (udev->driver_added_refcount != udev->bus->driver_added_refcount) || (udev->re_enumerate_wait != USB_RE_ENUM_DONE) || (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) || (udev->pwr_save.write_refs != 0) || ((udev->pwr_save.read_refs != 0) && (udev->flags.usb_mode == USB_MODE_HOST) && (usb_peer_can_wakeup(udev) == 0))); } /*------------------------------------------------------------------------* * usb_bus_powerd * * This function implements the USB power daemon and is called * regularly from the USB explore thread. *------------------------------------------------------------------------*/ #if USB_HAVE_POWERD void usb_bus_powerd(struct usb_bus *bus) { struct usb_device *udev; usb_ticks_t temp; usb_ticks_t limit; usb_ticks_t mintime; usb_size_t type_refs[5]; uint8_t x; limit = usb_power_timeout; if (limit == 0) limit = hz; else if (limit > 255) limit = 255 * hz; else limit = limit * hz; DPRINTF("bus=%p\n", bus); USB_BUS_LOCK(bus); /* * The root HUB device is never suspended * and we simply skip it. */ for (x = USB_ROOT_HUB_ADDR + 1; x != bus->devices_max; x++) { udev = bus->devices[x]; if (udev == NULL) continue; temp = ticks - udev->pwr_save.last_xfer_time; if (usb_peer_should_wakeup(udev)) { /* check if we are suspended */ if (udev->flags.self_suspended != 0) { USB_BUS_UNLOCK(bus); usb_dev_resume_peer(udev); USB_BUS_LOCK(bus); } } else if ((temp >= limit) && (udev->flags.usb_mode == USB_MODE_HOST) && (udev->flags.self_suspended == 0)) { /* try to do suspend */ USB_BUS_UNLOCK(bus); usb_dev_suspend_peer(udev); USB_BUS_LOCK(bus); } } /* reset counters */ mintime = (usb_ticks_t)-1; type_refs[0] = 0; type_refs[1] = 0; type_refs[2] = 0; type_refs[3] = 0; type_refs[4] = 0; /* Re-loop all the devices to get the actual state */ for (x = USB_ROOT_HUB_ADDR + 1; x != bus->devices_max; x++) { udev = bus->devices[x]; if (udev == NULL) continue; /* we found a non-Root-Hub USB device */ type_refs[4] += 1; /* "last_xfer_time" can be updated by a resume */ temp = ticks - udev->pwr_save.last_xfer_time; /* * Compute minimum time since last transfer for the complete * bus: */ if (temp < mintime) mintime = temp; if (udev->flags.self_suspended == 0) { type_refs[0] += udev->pwr_save.type_refs[0]; type_refs[1] += udev->pwr_save.type_refs[1]; type_refs[2] += udev->pwr_save.type_refs[2]; type_refs[3] += udev->pwr_save.type_refs[3]; } } if (mintime >= (usb_ticks_t)(1 * hz)) { /* recompute power masks */ DPRINTF("Recomputing power masks\n"); bus->hw_power_state = 0; if (type_refs[UE_CONTROL] != 0) bus->hw_power_state |= USB_HW_POWER_CONTROL; if (type_refs[UE_BULK] != 0) bus->hw_power_state |= USB_HW_POWER_BULK; if (type_refs[UE_INTERRUPT] != 0) bus->hw_power_state |= USB_HW_POWER_INTERRUPT; if (type_refs[UE_ISOCHRONOUS] != 0) bus->hw_power_state |= USB_HW_POWER_ISOC; if (type_refs[4] != 0) bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB; } USB_BUS_UNLOCK(bus); if (bus->methods->set_hw_power != NULL) { /* always update hardware power! */ (bus->methods->set_hw_power) (bus); } return; } #endif /*------------------------------------------------------------------------* * usb_dev_resume_peer * * This function will resume an USB peer and do the required USB * signalling to get an USB device out of the suspended state. *------------------------------------------------------------------------*/ static void usb_dev_resume_peer(struct usb_device *udev) { struct usb_bus *bus; int err; /* be NULL safe */ if (udev == NULL) return; /* check if already resumed */ if (udev->flags.self_suspended == 0) return; /* we need a parent HUB to do resume */ if (udev->parent_hub == NULL) return; DPRINTF("udev=%p\n", udev); if ((udev->flags.usb_mode == USB_MODE_DEVICE) && (udev->flags.remote_wakeup == 0)) { /* * If the host did not set the remote wakeup feature, we can * not wake it up either! */ DPRINTF("remote wakeup is not set!\n"); return; } /* get bus pointer */ bus = udev->bus; /* resume parent hub first */ usb_dev_resume_peer(udev->parent_hub); /* reduce chance of instant resume failure by waiting a little bit */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); if (usb_device_20_compatible(udev)) { /* resume current port (Valid in Host and Device Mode) */ err = usbd_req_clear_port_feature(udev->parent_hub, NULL, udev->port_no, UHF_PORT_SUSPEND); if (err) { DPRINTFN(0, "Resuming port failed\n"); return; } } else { /* resume current port (Valid in Host and Device Mode) */ err = usbd_req_set_port_link_state(udev->parent_hub, NULL, udev->port_no, UPS_PORT_LS_U0); if (err) { DPRINTFN(0, "Resuming port failed\n"); return; } } /* resume settle time */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay)); if (bus->methods->device_resume != NULL) { /* resume USB device on the USB controller */ (bus->methods->device_resume) (udev); } USB_BUS_LOCK(bus); /* set that this device is now resumed */ udev->flags.self_suspended = 0; #if USB_HAVE_POWERD /* make sure that we don't go into suspend right away */ udev->pwr_save.last_xfer_time = ticks; /* make sure the needed power masks are on */ if (udev->pwr_save.type_refs[UE_CONTROL] != 0) bus->hw_power_state |= USB_HW_POWER_CONTROL; if (udev->pwr_save.type_refs[UE_BULK] != 0) bus->hw_power_state |= USB_HW_POWER_BULK; if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0) bus->hw_power_state |= USB_HW_POWER_INTERRUPT; if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) bus->hw_power_state |= USB_HW_POWER_ISOC; #endif USB_BUS_UNLOCK(bus); if (bus->methods->set_hw_power != NULL) { /* always update hardware power! */ (bus->methods->set_hw_power) (bus); } usbd_sr_lock(udev); /* notify all sub-devices about resume */ err = usb_suspend_resume(udev, 0); usbd_sr_unlock(udev); /* check if peer has wakeup capability */ if (usb_peer_can_wakeup(udev)) { /* clear remote wakeup */ err = usbd_req_clear_device_feature(udev, NULL, UF_DEVICE_REMOTE_WAKEUP); if (err) { DPRINTFN(0, "Clearing device " "remote wakeup failed: %s\n", usbd_errstr(err)); } } } /*------------------------------------------------------------------------* * usb_dev_suspend_peer * * This function will suspend an USB peer and do the required USB * signalling to get an USB device into the suspended state. *------------------------------------------------------------------------*/ static void usb_dev_suspend_peer(struct usb_device *udev) { struct usb_device *child; int err; uint8_t x; uint8_t nports; repeat: /* be NULL safe */ if (udev == NULL) return; /* check if already suspended */ if (udev->flags.self_suspended) return; /* we need a parent HUB to do suspend */ if (udev->parent_hub == NULL) return; DPRINTF("udev=%p\n", udev); /* check if the current device is a HUB */ if (udev->hub != NULL) { nports = udev->hub->nports; /* check if all devices on the HUB are suspended */ for (x = 0; x != nports; x++) { child = usb_bus_port_get_device(udev->bus, udev->hub->ports + x); if (child == NULL) continue; if (child->flags.self_suspended) continue; DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1); return; } } if (usb_peer_can_wakeup(udev)) { /* * This request needs to be done before we set * "udev->flags.self_suspended": */ /* allow device to do remote wakeup */ err = usbd_req_set_device_feature(udev, NULL, UF_DEVICE_REMOTE_WAKEUP); if (err) { DPRINTFN(0, "Setting device " "remote wakeup failed\n"); } } USB_BUS_LOCK(udev->bus); /* * Checking for suspend condition and setting suspended bit * must be atomic! */ err = usb_peer_should_wakeup(udev); if (err == 0) { /* * Set that this device is suspended. This variable * must be set before calling USB controller suspend * callbacks. */ udev->flags.self_suspended = 1; } USB_BUS_UNLOCK(udev->bus); if (err != 0) { if (usb_peer_can_wakeup(udev)) { /* allow device to do remote wakeup */ err = usbd_req_clear_device_feature(udev, NULL, UF_DEVICE_REMOTE_WAKEUP); if (err) { DPRINTFN(0, "Setting device " "remote wakeup failed\n"); } } if (udev->flags.usb_mode == USB_MODE_DEVICE) { /* resume parent HUB first */ usb_dev_resume_peer(udev->parent_hub); /* reduce chance of instant resume failure by waiting a little bit */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); /* resume current port (Valid in Host and Device Mode) */ err = usbd_req_clear_port_feature(udev->parent_hub, NULL, udev->port_no, UHF_PORT_SUSPEND); /* resume settle time */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay)); } DPRINTF("Suspend was cancelled!\n"); return; } usbd_sr_lock(udev); /* notify all sub-devices about suspend */ err = usb_suspend_resume(udev, 1); usbd_sr_unlock(udev); if (udev->bus->methods->device_suspend != NULL) { usb_timeout_t temp; /* suspend device on the USB controller */ (udev->bus->methods->device_suspend) (udev); /* do DMA delay */ temp = usbd_get_dma_delay(udev); if (temp != 0) usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp)); } if (usb_device_20_compatible(udev)) { /* suspend current port */ err = usbd_req_set_port_feature(udev->parent_hub, NULL, udev->port_no, UHF_PORT_SUSPEND); if (err) { DPRINTFN(0, "Suspending port failed\n"); return; } } else { /* suspend current port */ err = usbd_req_set_port_link_state(udev->parent_hub, NULL, udev->port_no, UPS_PORT_LS_U3); if (err) { DPRINTFN(0, "Suspending port failed\n"); return; } } udev = udev->parent_hub; goto repeat; } /*------------------------------------------------------------------------* * usbd_set_power_mode * * This function will set the power mode, see USB_POWER_MODE_XXX for a * USB device. *------------------------------------------------------------------------*/ void usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode) { /* filter input argument */ if ((power_mode != USB_POWER_MODE_ON) && (power_mode != USB_POWER_MODE_OFF)) power_mode = USB_POWER_MODE_SAVE; power_mode = usbd_filter_power_mode(udev, power_mode); udev->power_mode = power_mode; /* update copy of power mode */ #if USB_HAVE_POWERD usb_bus_power_update(udev->bus); #else usb_needs_explore(udev->bus, 0 /* no probe */ ); #endif } /*------------------------------------------------------------------------* * usbd_filter_power_mode * * This function filters the power mode based on hardware requirements. *------------------------------------------------------------------------*/ uint8_t usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode) { const struct usb_bus_methods *mtod; int8_t temp; mtod = udev->bus->methods; temp = -1; if (mtod->get_power_mode != NULL) (mtod->get_power_mode) (udev, &temp); /* check if we should not filter */ if (temp < 0) return (power_mode); /* use fixed power mode given by hardware driver */ return (temp); } /*------------------------------------------------------------------------* * usbd_start_re_enumerate * * This function starts re-enumeration of the given USB device. This * function does not need to be called BUS-locked. This function does * not wait until the re-enumeration is completed. *------------------------------------------------------------------------*/ void usbd_start_re_enumerate(struct usb_device *udev) { if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) { udev->re_enumerate_wait = USB_RE_ENUM_START; usb_needs_explore(udev->bus, 0); } } /*-----------------------------------------------------------------------* * usbd_start_set_config * * This function starts setting a USB configuration. This function * does not need to be called BUS-locked. This function does not wait * until the set USB configuratino is completed. *------------------------------------------------------------------------*/ usb_error_t usbd_start_set_config(struct usb_device *udev, uint8_t index) { if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) { if (udev->curr_config_index == index) { /* no change needed */ return (0); } udev->next_config_index = index; udev->re_enumerate_wait = USB_RE_ENUM_SET_CONFIG; usb_needs_explore(udev->bus, 0); return (0); } else if (udev->re_enumerate_wait == USB_RE_ENUM_SET_CONFIG) { if (udev->next_config_index == index) { /* no change needed */ return (0); } } return (USB_ERR_PENDING_REQUESTS); } Index: stable/11/sys/dev/usb/usb_request.c =================================================================== --- stable/11/sys/dev/usb/usb_request.c (revision 343134) +++ stable/11/sys/dev/usb/usb_request.c (revision 343135) @@ -1,2307 +1,2308 @@ /* $FreeBSD$ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. * Copyright (c) 1998 Lennart Augustsson. All rights reserved. * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifdef USB_GLOBAL_INCLUDE_FILE #include USB_GLOBAL_INCLUDE_FILE #else #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define USB_DEBUG_VAR usb_debug #include #include #include #include #include #include #include #include #include #include #include #include #endif /* USB_GLOBAL_INCLUDE_FILE */ static int usb_no_cs_fail; SYSCTL_INT(_hw_usb, OID_AUTO, no_cs_fail, CTLFLAG_RWTUN, &usb_no_cs_fail, 0, "USB clear stall failures are ignored, if set"); static int usb_full_ddesc; SYSCTL_INT(_hw_usb, OID_AUTO, full_ddesc, CTLFLAG_RWTUN, &usb_full_ddesc, 0, "USB always read complete device descriptor, if set"); #ifdef USB_DEBUG #ifdef USB_REQ_DEBUG /* The following structures are used in connection to fault injection. */ struct usb_ctrl_debug { int bus_index; /* target bus */ int dev_index; /* target address */ int ds_fail; /* fail data stage */ int ss_fail; /* fail status stage */ int ds_delay; /* data stage delay in ms */ int ss_delay; /* status stage delay in ms */ int bmRequestType_value; int bRequest_value; }; struct usb_ctrl_debug_bits { uint16_t ds_delay; uint16_t ss_delay; uint8_t ds_fail:1; uint8_t ss_fail:1; uint8_t enabled:1; }; /* The default is to disable fault injection. */ static struct usb_ctrl_debug usb_ctrl_debug = { .bus_index = -1, .dev_index = -1, .bmRequestType_value = -1, .bRequest_value = -1, }; SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_bus_fail, CTLFLAG_RWTUN, &usb_ctrl_debug.bus_index, 0, "USB controller index to fail"); SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_dev_fail, CTLFLAG_RWTUN, &usb_ctrl_debug.dev_index, 0, "USB device address to fail"); SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ds_fail, CTLFLAG_RWTUN, &usb_ctrl_debug.ds_fail, 0, "USB fail data stage"); SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ss_fail, CTLFLAG_RWTUN, &usb_ctrl_debug.ss_fail, 0, "USB fail status stage"); SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ds_delay, CTLFLAG_RWTUN, &usb_ctrl_debug.ds_delay, 0, "USB data stage delay in ms"); SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ss_delay, CTLFLAG_RWTUN, &usb_ctrl_debug.ss_delay, 0, "USB status stage delay in ms"); SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_rt_fail, CTLFLAG_RWTUN, &usb_ctrl_debug.bmRequestType_value, 0, "USB bmRequestType to fail"); SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_rv_fail, CTLFLAG_RWTUN, &usb_ctrl_debug.bRequest_value, 0, "USB bRequest to fail"); /*------------------------------------------------------------------------* * usbd_get_debug_bits * * This function is only useful in USB host mode. *------------------------------------------------------------------------*/ static void usbd_get_debug_bits(struct usb_device *udev, struct usb_device_request *req, struct usb_ctrl_debug_bits *dbg) { int temp; memset(dbg, 0, sizeof(*dbg)); /* Compute data stage delay */ temp = usb_ctrl_debug.ds_delay; if (temp < 0) temp = 0; else if (temp > (16*1024)) temp = (16*1024); dbg->ds_delay = temp; /* Compute status stage delay */ temp = usb_ctrl_debug.ss_delay; if (temp < 0) temp = 0; else if (temp > (16*1024)) temp = (16*1024); dbg->ss_delay = temp; /* Check if this control request should be failed */ if (usbd_get_bus_index(udev) != usb_ctrl_debug.bus_index) return; if (usbd_get_device_index(udev) != usb_ctrl_debug.dev_index) return; temp = usb_ctrl_debug.bmRequestType_value; if ((temp != req->bmRequestType) && (temp >= 0) && (temp <= 255)) return; temp = usb_ctrl_debug.bRequest_value; if ((temp != req->bRequest) && (temp >= 0) && (temp <= 255)) return; temp = usb_ctrl_debug.ds_fail; if (temp) dbg->ds_fail = 1; temp = usb_ctrl_debug.ss_fail; if (temp) dbg->ss_fail = 1; dbg->enabled = 1; } #endif /* USB_REQ_DEBUG */ #endif /* USB_DEBUG */ /*------------------------------------------------------------------------* * usbd_do_request_callback * * This function is the USB callback for generic USB Host control * transfers. *------------------------------------------------------------------------*/ void usbd_do_request_callback(struct usb_xfer *xfer, usb_error_t error) { ; /* workaround for a bug in "indent" */ DPRINTF("st=%u\n", USB_GET_STATE(xfer)); switch (USB_GET_STATE(xfer)) { case USB_ST_SETUP: usbd_transfer_submit(xfer); break; default: cv_signal(&xfer->xroot->udev->ctrlreq_cv); break; } } /*------------------------------------------------------------------------* * usb_do_clear_stall_callback * * This function is the USB callback for generic clear stall requests. *------------------------------------------------------------------------*/ void usb_do_clear_stall_callback(struct usb_xfer *xfer, usb_error_t error) { struct usb_device_request req; struct usb_device *udev; struct usb_endpoint *ep; struct usb_endpoint *ep_end; struct usb_endpoint *ep_first; usb_stream_t x; uint8_t to; udev = xfer->xroot->udev; USB_BUS_LOCK(udev->bus); /* round robin endpoint clear stall */ ep = udev->ep_curr; ep_end = udev->endpoints + udev->endpoints_max; ep_first = udev->endpoints; to = udev->endpoints_max; switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: tr_transferred: /* reset error counter */ udev->clear_stall_errors = 0; if (ep == NULL) goto tr_setup; /* device was unconfigured */ if (ep->edesc && ep->is_stalled) { ep->toggle_next = 0; ep->is_stalled = 0; /* some hardware needs a callback to clear the data toggle */ usbd_clear_stall_locked(udev, ep); for (x = 0; x != USB_MAX_EP_STREAMS; x++) { /* start the current or next transfer, if any */ usb_command_wrapper(&ep->endpoint_q[x], ep->endpoint_q[x].curr); } } ep++; case USB_ST_SETUP: tr_setup: if (to == 0) break; /* no endpoints - nothing to do */ if ((ep < ep_first) || (ep >= ep_end)) ep = ep_first; /* endpoint wrapped around */ if (ep->edesc && ep->is_stalled) { /* setup a clear-stall packet */ req.bmRequestType = UT_WRITE_ENDPOINT; req.bRequest = UR_CLEAR_FEATURE; USETW(req.wValue, UF_ENDPOINT_HALT); req.wIndex[0] = ep->edesc->bEndpointAddress; req.wIndex[1] = 0; USETW(req.wLength, 0); /* copy in the transfer */ usbd_copy_in(xfer->frbuffers, 0, &req, sizeof(req)); /* set length */ usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); xfer->nframes = 1; USB_BUS_UNLOCK(udev->bus); usbd_transfer_submit(xfer); USB_BUS_LOCK(udev->bus); break; } ep++; to--; goto tr_setup; default: if (error == USB_ERR_CANCELLED) break; DPRINTF("Clear stall failed.\n"); /* * Some VMs like VirtualBox always return failure on * clear-stall which we sometimes should just ignore. */ if (usb_no_cs_fail) goto tr_transferred; if (udev->clear_stall_errors == USB_CS_RESET_LIMIT) goto tr_setup; if (error == USB_ERR_TIMEOUT) { udev->clear_stall_errors = USB_CS_RESET_LIMIT; DPRINTF("Trying to re-enumerate.\n"); usbd_start_re_enumerate(udev); } else { udev->clear_stall_errors++; if (udev->clear_stall_errors == USB_CS_RESET_LIMIT) { DPRINTF("Trying to re-enumerate.\n"); usbd_start_re_enumerate(udev); } } goto tr_setup; } /* store current endpoint */ udev->ep_curr = ep; USB_BUS_UNLOCK(udev->bus); } static usb_handle_req_t * usbd_get_hr_func(struct usb_device *udev) { /* figure out if there is a Handle Request function */ if (udev->flags.usb_mode == USB_MODE_DEVICE) return (usb_temp_get_desc_p); else if (udev->parent_hub == NULL) return (udev->bus->methods->roothub_exec); else return (NULL); } /*------------------------------------------------------------------------* * usbd_do_request_flags and usbd_do_request * * Description of arguments passed to these functions: * * "udev" - this is the "usb_device" structure pointer on which the * request should be performed. It is possible to call this function * in both Host Side mode and Device Side mode. * * "mtx" - if this argument is non-NULL the mutex pointed to by it * will get dropped and picked up during the execution of this * function, hence this function sometimes needs to sleep. If this * argument is NULL it has no effect. * * "req" - this argument must always be non-NULL and points to an * 8-byte structure holding the USB request to be done. The USB * request structure has a bit telling the direction of the USB * request, if it is a read or a write. * * "data" - if the "wLength" part of the structure pointed to by "req" * is non-zero this argument must point to a valid kernel buffer which * can hold at least "wLength" bytes. If "wLength" is zero "data" can * be NULL. * * "flags" - here is a list of valid flags: * * o USB_SHORT_XFER_OK: allows the data transfer to be shorter than * specified * * o USB_DELAY_STATUS_STAGE: allows the status stage to be performed * at a later point in time. This is tunable by the "hw.usb.ss_delay" * sysctl. This flag is mostly useful for debugging. * * o USB_USER_DATA_PTR: treat the "data" pointer like a userland * pointer. * * "actlen" - if non-NULL the actual transfer length will be stored in * the 16-bit unsigned integer pointed to by "actlen". This * information is mostly useful when the "USB_SHORT_XFER_OK" flag is * used. * * "timeout" - gives the timeout for the control transfer in * milliseconds. A "timeout" value less than 50 milliseconds is * treated like a 50 millisecond timeout. A "timeout" value greater * than 30 seconds is treated like a 30 second timeout. This USB stack * does not allow control requests without a timeout. * * NOTE: This function is thread safe. All calls to "usbd_do_request_flags" * will be serialized by the use of the USB device enumeration lock. * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx, struct usb_device_request *req, void *data, uint16_t flags, uint16_t *actlen, usb_timeout_t timeout) { #ifdef USB_REQ_DEBUG struct usb_ctrl_debug_bits dbg; #endif usb_handle_req_t *hr_func; struct usb_xfer *xfer; const void *desc; int err = 0; usb_ticks_t start_ticks; usb_ticks_t delta_ticks; usb_ticks_t max_ticks; uint16_t length; uint16_t temp; uint16_t acttemp; uint8_t do_unlock; if (timeout < 50) { /* timeout is too small */ timeout = 50; } if (timeout > 30000) { /* timeout is too big */ timeout = 30000; } length = UGETW(req->wLength); DPRINTFN(5, "udev=%p bmRequestType=0x%02x bRequest=0x%02x " "wValue=0x%02x%02x wIndex=0x%02x%02x wLength=0x%02x%02x\n", udev, req->bmRequestType, req->bRequest, req->wValue[1], req->wValue[0], req->wIndex[1], req->wIndex[0], req->wLength[1], req->wLength[0]); /* Check if the device is still alive */ if (udev->state < USB_STATE_POWERED) { DPRINTF("usb device has gone\n"); return (USB_ERR_NOT_CONFIGURED); } /* * Set "actlen" to a known value in case the caller does not * check the return value: */ if (actlen) *actlen = 0; #if (USB_HAVE_USER_IO == 0) if (flags & USB_USER_DATA_PTR) return (USB_ERR_INVAL); #endif if ((mtx != NULL) && (mtx != &Giant)) { mtx_unlock(mtx); mtx_assert(mtx, MA_NOTOWNED); } /* * Serialize access to this function: */ do_unlock = usbd_ctrl_lock(udev); hr_func = usbd_get_hr_func(udev); if (hr_func != NULL) { DPRINTF("Handle Request function is set\n"); desc = NULL; temp = 0; if (!(req->bmRequestType & UT_READ)) { if (length != 0) { DPRINTFN(1, "The handle request function " "does not support writing data!\n"); err = USB_ERR_INVAL; goto done; } } /* The root HUB code needs the BUS lock locked */ USB_BUS_LOCK(udev->bus); err = (hr_func) (udev, req, &desc, &temp); USB_BUS_UNLOCK(udev->bus); if (err) goto done; if (length > temp) { if (!(flags & USB_SHORT_XFER_OK)) { err = USB_ERR_SHORT_XFER; goto done; } length = temp; } if (actlen) *actlen = length; if (length > 0) { #if USB_HAVE_USER_IO if (flags & USB_USER_DATA_PTR) { if (copyout(desc, data, length)) { err = USB_ERR_INVAL; goto done; } } else #endif memcpy(data, desc, length); } goto done; /* success */ } /* * Setup a new USB transfer or use the existing one, if any: */ usbd_ctrl_transfer_setup(udev); xfer = udev->ctrl_xfer[0]; if (xfer == NULL) { /* most likely out of memory */ err = USB_ERR_NOMEM; goto done; } #ifdef USB_REQ_DEBUG /* Get debug bits */ usbd_get_debug_bits(udev, req, &dbg); /* Check for fault injection */ if (dbg.enabled) flags |= USB_DELAY_STATUS_STAGE; #endif USB_XFER_LOCK(xfer); if (flags & USB_DELAY_STATUS_STAGE) xfer->flags.manual_status = 1; else xfer->flags.manual_status = 0; if (flags & USB_SHORT_XFER_OK) xfer->flags.short_xfer_ok = 1; else xfer->flags.short_xfer_ok = 0; xfer->timeout = timeout; start_ticks = ticks; max_ticks = USB_MS_TO_TICKS(timeout); usbd_copy_in(xfer->frbuffers, 0, req, sizeof(*req)); usbd_xfer_set_frame_len(xfer, 0, sizeof(*req)); while (1) { temp = length; if (temp > usbd_xfer_max_len(xfer)) { temp = usbd_xfer_max_len(xfer); } #ifdef USB_REQ_DEBUG if (xfer->flags.manual_status) { if (usbd_xfer_frame_len(xfer, 0) != 0) { /* Execute data stage separately */ temp = 0; } else if (temp > 0) { if (dbg.ds_fail) { err = USB_ERR_INVAL; break; } if (dbg.ds_delay > 0) { usb_pause_mtx( xfer->xroot->xfer_mtx, USB_MS_TO_TICKS(dbg.ds_delay)); /* make sure we don't time out */ start_ticks = ticks; } } } #endif usbd_xfer_set_frame_len(xfer, 1, temp); if (temp > 0) { if (!(req->bmRequestType & UT_READ)) { #if USB_HAVE_USER_IO if (flags & USB_USER_DATA_PTR) { USB_XFER_UNLOCK(xfer); err = usbd_copy_in_user(xfer->frbuffers + 1, 0, data, temp); USB_XFER_LOCK(xfer); if (err) { err = USB_ERR_INVAL; break; } } else #endif usbd_copy_in(xfer->frbuffers + 1, 0, data, temp); } usbd_xfer_set_frames(xfer, 2); } else { if (usbd_xfer_frame_len(xfer, 0) == 0) { if (xfer->flags.manual_status) { #ifdef USB_REQ_DEBUG if (dbg.ss_fail) { err = USB_ERR_INVAL; break; } if (dbg.ss_delay > 0) { usb_pause_mtx( xfer->xroot->xfer_mtx, USB_MS_TO_TICKS(dbg.ss_delay)); /* make sure we don't time out */ start_ticks = ticks; } #endif xfer->flags.manual_status = 0; } else { break; } } usbd_xfer_set_frames(xfer, 1); } usbd_transfer_start(xfer); while (usbd_transfer_pending(xfer)) { cv_wait(&udev->ctrlreq_cv, xfer->xroot->xfer_mtx); } err = xfer->error; if (err) { break; } /* get actual length of DATA stage */ if (xfer->aframes < 2) { acttemp = 0; } else { acttemp = usbd_xfer_frame_len(xfer, 1); } /* check for short packet */ if (temp > acttemp) { temp = acttemp; length = temp; } if (temp > 0) { if (req->bmRequestType & UT_READ) { #if USB_HAVE_USER_IO if (flags & USB_USER_DATA_PTR) { USB_XFER_UNLOCK(xfer); err = usbd_copy_out_user(xfer->frbuffers + 1, 0, data, temp); USB_XFER_LOCK(xfer); if (err) { err = USB_ERR_INVAL; break; } } else #endif usbd_copy_out(xfer->frbuffers + 1, 0, data, temp); } } /* * Clear "frlengths[0]" so that we don't send the setup * packet again: */ usbd_xfer_set_frame_len(xfer, 0, 0); /* update length and data pointer */ length -= temp; data = USB_ADD_BYTES(data, temp); if (actlen) { (*actlen) += temp; } /* check for timeout */ delta_ticks = ticks - start_ticks; if (delta_ticks > max_ticks) { if (!err) { err = USB_ERR_TIMEOUT; } } if (err) { break; } } if (err) { /* * Make sure that the control endpoint is no longer * blocked in case of a non-transfer related error: */ usbd_transfer_stop(xfer); } USB_XFER_UNLOCK(xfer); done: if (do_unlock) usbd_ctrl_unlock(udev); if ((mtx != NULL) && (mtx != &Giant)) mtx_lock(mtx); switch (err) { case USB_ERR_NORMAL_COMPLETION: case USB_ERR_SHORT_XFER: case USB_ERR_STALLED: case USB_ERR_CANCELLED: break; default: DPRINTF("I/O error - waiting a bit for TT cleanup\n"); usb_pause_mtx(mtx, hz / 16); break; } return ((usb_error_t)err); } /*------------------------------------------------------------------------* * usbd_do_request_proc - factored out code * * This function is factored out code. It does basically the same like * usbd_do_request_flags, except it will check the status of the * passed process argument before doing the USB request. If the * process is draining the USB_ERR_IOERROR code will be returned. It * is assumed that the mutex associated with the process is locked * when calling this function. *------------------------------------------------------------------------*/ usb_error_t usbd_do_request_proc(struct usb_device *udev, struct usb_process *pproc, struct usb_device_request *req, void *data, uint16_t flags, uint16_t *actlen, usb_timeout_t timeout) { usb_error_t err; uint16_t len; /* get request data length */ len = UGETW(req->wLength); /* check if the device is being detached */ if (usb_proc_is_gone(pproc)) { err = USB_ERR_IOERROR; goto done; } /* forward the USB request */ err = usbd_do_request_flags(udev, pproc->up_mtx, req, data, flags, actlen, timeout); done: /* on failure we zero the data */ /* on short packet we zero the unused data */ if ((len != 0) && (req->bmRequestType & UE_DIR_IN)) { if (err) memset(data, 0, len); else if (actlen && *actlen != len) memset(((uint8_t *)data) + *actlen, 0, len - *actlen); } return (err); } /*------------------------------------------------------------------------* * usbd_req_reset_port * * This function will instruct a USB HUB to perform a reset sequence * on the specified port number. * * Returns: * 0: Success. The USB device should now be at address zero. * Else: Failure. No USB device is present and the USB port should be * disabled. *------------------------------------------------------------------------*/ usb_error_t usbd_req_reset_port(struct usb_device *udev, struct mtx *mtx, uint8_t port) { struct usb_port_status ps; usb_error_t err; uint16_t n; uint16_t status; uint16_t change; DPRINTF("\n"); /* clear any leftover port reset changes first */ usbd_req_clear_port_feature( udev, mtx, port, UHF_C_PORT_RESET); /* assert port reset on the given port */ err = usbd_req_set_port_feature( udev, mtx, port, UHF_PORT_RESET); /* check for errors */ if (err) goto done; n = 0; while (1) { /* wait for the device to recover from reset */ usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_delay)); n += usb_port_reset_delay; err = usbd_req_get_port_status(udev, mtx, &ps, port); if (err) goto done; status = UGETW(ps.wPortStatus); change = UGETW(ps.wPortChange); /* if the device disappeared, just give up */ if (!(status & UPS_CURRENT_CONNECT_STATUS)) goto done; /* check if reset is complete */ if (change & UPS_C_PORT_RESET) break; /* * Some Virtual Machines like VirtualBox 4.x fail to * generate a port reset change event. Check if reset * is no longer asserted. */ if (!(status & UPS_RESET)) break; /* check for timeout */ if (n > 1000) { n = 0; break; } } /* clear port reset first */ err = usbd_req_clear_port_feature( udev, mtx, port, UHF_C_PORT_RESET); if (err) goto done; /* check for timeout */ if (n == 0) { err = USB_ERR_TIMEOUT; goto done; } /* wait for the device to recover from reset */ usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_recovery)); done: DPRINTFN(2, "port %d reset returning error=%s\n", port, usbd_errstr(err)); return (err); } /*------------------------------------------------------------------------* * usbd_req_warm_reset_port * * This function will instruct an USB HUB to perform a warm reset * sequence on the specified port number. This kind of reset is not * mandatory for LOW-, FULL- and HIGH-speed USB HUBs and is targeted * for SUPER-speed USB HUBs. * * Returns: * 0: Success. The USB device should now be available again. * Else: Failure. No USB device is present and the USB port should be * disabled. *------------------------------------------------------------------------*/ usb_error_t usbd_req_warm_reset_port(struct usb_device *udev, struct mtx *mtx, uint8_t port) { struct usb_port_status ps; usb_error_t err; uint16_t n; uint16_t status; uint16_t change; DPRINTF("\n"); err = usbd_req_get_port_status(udev, mtx, &ps, port); if (err) goto done; status = UGETW(ps.wPortStatus); switch (UPS_PORT_LINK_STATE_GET(status)) { case UPS_PORT_LS_U3: case UPS_PORT_LS_COMP_MODE: case UPS_PORT_LS_LOOPBACK: case UPS_PORT_LS_SS_INA: break; default: DPRINTF("Wrong state for warm reset\n"); return (0); } /* clear any leftover warm port reset changes first */ usbd_req_clear_port_feature(udev, mtx, port, UHF_C_BH_PORT_RESET); /* set warm port reset */ err = usbd_req_set_port_feature(udev, mtx, port, UHF_BH_PORT_RESET); if (err) goto done; n = 0; while (1) { /* wait for the device to recover from reset */ usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_delay)); n += usb_port_reset_delay; err = usbd_req_get_port_status(udev, mtx, &ps, port); if (err) goto done; status = UGETW(ps.wPortStatus); change = UGETW(ps.wPortChange); /* if the device disappeared, just give up */ if (!(status & UPS_CURRENT_CONNECT_STATUS)) goto done; /* check if reset is complete */ if (change & UPS_C_BH_PORT_RESET) break; /* check for timeout */ if (n > 1000) { n = 0; break; } } /* clear port reset first */ err = usbd_req_clear_port_feature( udev, mtx, port, UHF_C_BH_PORT_RESET); if (err) goto done; /* check for timeout */ if (n == 0) { err = USB_ERR_TIMEOUT; goto done; } /* wait for the device to recover from reset */ usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_recovery)); done: DPRINTFN(2, "port %d warm reset returning error=%s\n", port, usbd_errstr(err)); return (err); } /*------------------------------------------------------------------------* * usbd_req_get_desc * * This function can be used to retrieve USB descriptors. It contains * some additional logic like zeroing of missing descriptor bytes and * retrying an USB descriptor in case of failure. The "min_len" * argument specifies the minimum descriptor length. The "max_len" * argument specifies the maximum descriptor length. If the real * descriptor length is less than the minimum length the missing * byte(s) will be zeroed. The type field, the second byte of the USB * descriptor, will get forced to the correct type. If the "actlen" * pointer is non-NULL, the actual length of the transfer will get * stored in the 16-bit unsigned integer which it is pointing to. The * first byte of the descriptor will not get updated. If the "actlen" * pointer is NULL the first byte of the descriptor will get updated * to reflect the actual length instead. If "min_len" is not equal to * "max_len" then this function will try to retrive the beginning of * the descriptor and base the maximum length on the first byte of the * descriptor. * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_desc(struct usb_device *udev, struct mtx *mtx, uint16_t *actlen, void *desc, uint16_t min_len, uint16_t max_len, uint16_t id, uint8_t type, uint8_t index, uint8_t retries) { struct usb_device_request req; uint8_t *buf = desc; usb_error_t err; DPRINTFN(4, "id=%d, type=%d, index=%d, max_len=%d\n", id, type, index, max_len); req.bmRequestType = UT_READ_DEVICE; req.bRequest = UR_GET_DESCRIPTOR; USETW2(req.wValue, type, index); USETW(req.wIndex, id); while (1) { if ((min_len < 2) || (max_len < 2)) { err = USB_ERR_INVAL; goto done; } USETW(req.wLength, min_len); err = usbd_do_request_flags(udev, mtx, &req, desc, 0, NULL, 500 /* ms */); if (err != 0 && err != USB_ERR_TIMEOUT && min_len != max_len) { /* clear descriptor data */ memset(desc, 0, max_len); /* try to read full descriptor length */ USETW(req.wLength, max_len); err = usbd_do_request_flags(udev, mtx, &req, desc, USB_SHORT_XFER_OK, NULL, 500 /* ms */); if (err == 0) { /* verify length */ if (buf[0] > max_len) buf[0] = max_len; else if (buf[0] < 2) err = USB_ERR_INVAL; min_len = buf[0]; /* enforce descriptor type */ buf[1] = type; goto done; } } if (err) { if (!retries) { goto done; } retries--; usb_pause_mtx(mtx, hz / 5); continue; } if (min_len == max_len) { /* enforce correct length */ if ((buf[0] > min_len) && (actlen == NULL)) buf[0] = min_len; /* enforce correct type */ buf[1] = type; goto done; } /* range check */ if (max_len > buf[0]) { max_len = buf[0]; } /* zero minimum data */ while (min_len > max_len) { min_len--; buf[min_len] = 0; } /* set new minimum length */ min_len = max_len; } done: if (actlen != NULL) { if (err) *actlen = 0; else *actlen = min_len; } return (err); } /*------------------------------------------------------------------------* * usbd_req_get_string_any * * This function will return the string given by "string_index" * using the first language ID. The maximum length "len" includes * the terminating zero. The "len" argument should be twice as * big pluss 2 bytes, compared with the actual maximum string length ! * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_string_any(struct usb_device *udev, struct mtx *mtx, char *buf, uint16_t len, uint8_t string_index) { char *s; uint8_t *temp; uint16_t i; uint16_t n; uint16_t c; uint8_t swap; usb_error_t err; if (len == 0) { /* should not happen */ return (USB_ERR_NORMAL_COMPLETION); } if (string_index == 0) { /* this is the language table */ buf[0] = 0; return (USB_ERR_INVAL); } if (udev->flags.no_strings) { buf[0] = 0; return (USB_ERR_STALLED); } err = usbd_req_get_string_desc (udev, mtx, buf, len, udev->langid, string_index); if (err) { buf[0] = 0; return (err); } temp = (uint8_t *)buf; if (temp[0] < 2) { /* string length is too short */ buf[0] = 0; return (USB_ERR_INVAL); } /* reserve one byte for terminating zero */ len--; /* find maximum length */ s = buf; n = (temp[0] / 2) - 1; if (n > len) { n = len; } /* skip descriptor header */ temp += 2; /* reset swap state */ swap = 3; /* convert and filter */ for (i = 0; (i != n); i++) { c = UGETW(temp + (2 * i)); /* convert from Unicode, handle buggy strings */ if (((c & 0xff00) == 0) && (swap & 1)) { /* Little Endian, default */ *s = c; swap = 1; } else if (((c & 0x00ff) == 0) && (swap & 2)) { /* Big Endian */ *s = c >> 8; swap = 2; } else { /* silently skip bad character */ continue; } /* * Filter by default - We only allow alphanumerical * and a few more to avoid any problems with scripts * and daemons. */ if (isalpha(*s) || isdigit(*s) || *s == '-' || *s == '+' || *s == ' ' || *s == '.' || *s == ',') { /* allowed */ s++; } /* silently skip bad character */ } *s = 0; /* zero terminate resulting string */ return (USB_ERR_NORMAL_COMPLETION); } /*------------------------------------------------------------------------* * usbd_req_get_string_desc * * If you don't know the language ID, consider using * "usbd_req_get_string_any()". * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_string_desc(struct usb_device *udev, struct mtx *mtx, void *sdesc, uint16_t max_len, uint16_t lang_id, uint8_t string_index) { return (usbd_req_get_desc(udev, mtx, NULL, sdesc, 2, max_len, lang_id, UDESC_STRING, string_index, 0)); } /*------------------------------------------------------------------------* * usbd_req_get_config_desc_ptr * * This function is used in device side mode to retrieve the pointer * to the generated config descriptor. This saves allocating space for * an additional config descriptor when setting the configuration. * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_descriptor_ptr(struct usb_device *udev, struct usb_config_descriptor **ppcd, uint16_t wValue) { struct usb_device_request req; usb_handle_req_t *hr_func; const void *ptr; uint16_t len; usb_error_t err; req.bmRequestType = UT_READ_DEVICE; req.bRequest = UR_GET_DESCRIPTOR; USETW(req.wValue, wValue); USETW(req.wIndex, 0); USETW(req.wLength, 0); ptr = NULL; len = 0; hr_func = usbd_get_hr_func(udev); if (hr_func == NULL) err = USB_ERR_INVAL; else { USB_BUS_LOCK(udev->bus); err = (hr_func) (udev, &req, &ptr, &len); USB_BUS_UNLOCK(udev->bus); } if (err) ptr = NULL; else if (ptr == NULL) err = USB_ERR_INVAL; *ppcd = __DECONST(struct usb_config_descriptor *, ptr); return (err); } /*------------------------------------------------------------------------* * usbd_req_get_config_desc * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_config_desc(struct usb_device *udev, struct mtx *mtx, struct usb_config_descriptor *d, uint8_t conf_index) { usb_error_t err; DPRINTFN(4, "confidx=%d\n", conf_index); err = usbd_req_get_desc(udev, mtx, NULL, d, sizeof(*d), sizeof(*d), 0, UDESC_CONFIG, conf_index, 0); if (err) { goto done; } /* Extra sanity checking */ if (UGETW(d->wTotalLength) < (uint16_t)sizeof(*d)) { err = USB_ERR_INVAL; } done: return (err); } /*------------------------------------------------------------------------* * usbd_alloc_config_desc * * This function is used to allocate a zeroed configuration * descriptor. * * Returns: * NULL: Failure * Else: Success *------------------------------------------------------------------------*/ void * usbd_alloc_config_desc(struct usb_device *udev, uint32_t size) { if (size > USB_CONFIG_MAX) { DPRINTF("Configuration descriptor too big\n"); return (NULL); } #if (USB_HAVE_FIXED_CONFIG == 0) return (malloc(size, M_USBDEV, M_ZERO | M_WAITOK)); #else memset(udev->config_data, 0, sizeof(udev->config_data)); return (udev->config_data); #endif } /*------------------------------------------------------------------------* * usbd_alloc_config_desc * * This function is used to free a configuration descriptor. *------------------------------------------------------------------------*/ void usbd_free_config_desc(struct usb_device *udev, void *ptr) { #if (USB_HAVE_FIXED_CONFIG == 0) free(ptr, M_USBDEV); #endif } /*------------------------------------------------------------------------* * usbd_req_get_config_desc_full * * This function gets the complete USB configuration descriptor and * ensures that "wTotalLength" is correct. The returned configuration * descriptor is freed by calling "usbd_free_config_desc()". * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_config_desc_full(struct usb_device *udev, struct mtx *mtx, struct usb_config_descriptor **ppcd, uint8_t index) { struct usb_config_descriptor cd; struct usb_config_descriptor *cdesc; uint32_t len; usb_error_t err; DPRINTFN(4, "index=%d\n", index); *ppcd = NULL; err = usbd_req_get_config_desc(udev, mtx, &cd, index); if (err) return (err); /* get full descriptor */ len = UGETW(cd.wTotalLength); if (len < (uint32_t)sizeof(*cdesc)) { /* corrupt descriptor */ return (USB_ERR_INVAL); } else if (len > USB_CONFIG_MAX) { DPRINTF("Configuration descriptor was truncated\n"); len = USB_CONFIG_MAX; } cdesc = usbd_alloc_config_desc(udev, len); if (cdesc == NULL) return (USB_ERR_NOMEM); err = usbd_req_get_desc(udev, mtx, NULL, cdesc, len, len, 0, UDESC_CONFIG, index, 3); if (err) { usbd_free_config_desc(udev, cdesc); return (err); } /* make sure that the device is not fooling us: */ USETW(cdesc->wTotalLength, len); *ppcd = cdesc; return (0); /* success */ } /*------------------------------------------------------------------------* * usbd_req_get_device_desc * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_device_desc(struct usb_device *udev, struct mtx *mtx, struct usb_device_descriptor *d) { DPRINTFN(4, "\n"); return (usbd_req_get_desc(udev, mtx, NULL, d, sizeof(*d), sizeof(*d), 0, UDESC_DEVICE, 0, 3)); } /*------------------------------------------------------------------------* * usbd_req_get_alt_interface_no * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_alt_interface_no(struct usb_device *udev, struct mtx *mtx, uint8_t *alt_iface_no, uint8_t iface_index) { struct usb_interface *iface = usbd_get_iface(udev, iface_index); struct usb_device_request req; if ((iface == NULL) || (iface->idesc == NULL)) return (USB_ERR_INVAL); req.bmRequestType = UT_READ_INTERFACE; req.bRequest = UR_GET_INTERFACE; USETW(req.wValue, 0); req.wIndex[0] = iface->idesc->bInterfaceNumber; req.wIndex[1] = 0; USETW(req.wLength, 1); return (usbd_do_request(udev, mtx, &req, alt_iface_no)); } /*------------------------------------------------------------------------* * usbd_req_set_alt_interface_no * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_alt_interface_no(struct usb_device *udev, struct mtx *mtx, uint8_t iface_index, uint8_t alt_no) { struct usb_interface *iface = usbd_get_iface(udev, iface_index); struct usb_device_request req; if ((iface == NULL) || (iface->idesc == NULL)) return (USB_ERR_INVAL); req.bmRequestType = UT_WRITE_INTERFACE; req.bRequest = UR_SET_INTERFACE; req.wValue[0] = alt_no; req.wValue[1] = 0; req.wIndex[0] = iface->idesc->bInterfaceNumber; req.wIndex[1] = 0; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_get_device_status * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_device_status(struct usb_device *udev, struct mtx *mtx, struct usb_status *st) { struct usb_device_request req; req.bmRequestType = UT_READ_DEVICE; req.bRequest = UR_GET_STATUS; USETW(req.wValue, 0); USETW(req.wIndex, 0); USETW(req.wLength, sizeof(*st)); return (usbd_do_request(udev, mtx, &req, st)); } /*------------------------------------------------------------------------* * usbd_req_get_hub_descriptor * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_hub_descriptor(struct usb_device *udev, struct mtx *mtx, struct usb_hub_descriptor *hd, uint8_t nports) { struct usb_device_request req; uint16_t len = (nports + 7 + (8 * 8)) / 8; req.bmRequestType = UT_READ_CLASS_DEVICE; req.bRequest = UR_GET_DESCRIPTOR; USETW2(req.wValue, UDESC_HUB, 0); USETW(req.wIndex, 0); USETW(req.wLength, len); return (usbd_do_request(udev, mtx, &req, hd)); } /*------------------------------------------------------------------------* * usbd_req_get_ss_hub_descriptor * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_ss_hub_descriptor(struct usb_device *udev, struct mtx *mtx, struct usb_hub_ss_descriptor *hd, uint8_t nports) { struct usb_device_request req; uint16_t len = sizeof(*hd) - 32 + 1 + ((nports + 7) / 8); req.bmRequestType = UT_READ_CLASS_DEVICE; req.bRequest = UR_GET_DESCRIPTOR; USETW2(req.wValue, UDESC_SS_HUB, 0); USETW(req.wIndex, 0); USETW(req.wLength, len); return (usbd_do_request(udev, mtx, &req, hd)); } /*------------------------------------------------------------------------* * usbd_req_get_hub_status * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_hub_status(struct usb_device *udev, struct mtx *mtx, struct usb_hub_status *st) { struct usb_device_request req; req.bmRequestType = UT_READ_CLASS_DEVICE; req.bRequest = UR_GET_STATUS; USETW(req.wValue, 0); USETW(req.wIndex, 0); USETW(req.wLength, sizeof(struct usb_hub_status)); return (usbd_do_request(udev, mtx, &req, st)); } /*------------------------------------------------------------------------* * usbd_req_set_address * * This function is used to set the address for an USB device. After * port reset the USB device will respond at address zero. * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_address(struct usb_device *udev, struct mtx *mtx, uint16_t addr) { struct usb_device_request req; usb_error_t err; DPRINTFN(6, "setting device address=%d\n", addr); req.bmRequestType = UT_WRITE_DEVICE; req.bRequest = UR_SET_ADDRESS; USETW(req.wValue, addr); USETW(req.wIndex, 0); USETW(req.wLength, 0); err = USB_ERR_INVAL; /* check if USB controller handles set address */ if (udev->bus->methods->set_address != NULL) err = (udev->bus->methods->set_address) (udev, mtx, addr); if (err != USB_ERR_INVAL) goto done; /* Setting the address should not take more than 1 second ! */ err = usbd_do_request_flags(udev, mtx, &req, NULL, USB_DELAY_STATUS_STAGE, NULL, 1000); done: /* allow device time to set new address */ usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_set_address_settle)); return (err); } /*------------------------------------------------------------------------* * usbd_req_get_port_status * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_port_status(struct usb_device *udev, struct mtx *mtx, struct usb_port_status *ps, uint8_t port) { struct usb_device_request req; req.bmRequestType = UT_READ_CLASS_OTHER; req.bRequest = UR_GET_STATUS; USETW(req.wValue, 0); req.wIndex[0] = port; req.wIndex[1] = 0; - USETW(req.wLength, sizeof *ps); - return (usbd_do_request(udev, mtx, &req, ps)); + USETW(req.wLength, sizeof(*ps)); + + return (usbd_do_request_flags(udev, mtx, &req, ps, 0, NULL, 1000)); } /*------------------------------------------------------------------------* * usbd_req_clear_hub_feature * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_clear_hub_feature(struct usb_device *udev, struct mtx *mtx, uint16_t sel) { struct usb_device_request req; req.bmRequestType = UT_WRITE_CLASS_DEVICE; req.bRequest = UR_CLEAR_FEATURE; USETW(req.wValue, sel); USETW(req.wIndex, 0); USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_hub_feature * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_hub_feature(struct usb_device *udev, struct mtx *mtx, uint16_t sel) { struct usb_device_request req; req.bmRequestType = UT_WRITE_CLASS_DEVICE; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, sel); USETW(req.wIndex, 0); USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_hub_u1_timeout * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_hub_u1_timeout(struct usb_device *udev, struct mtx *mtx, uint8_t port, uint8_t timeout) { struct usb_device_request req; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, UHF_PORT_U1_TIMEOUT); req.wIndex[0] = port; req.wIndex[1] = timeout; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_hub_u2_timeout * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_hub_u2_timeout(struct usb_device *udev, struct mtx *mtx, uint8_t port, uint8_t timeout) { struct usb_device_request req; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, UHF_PORT_U2_TIMEOUT); req.wIndex[0] = port; req.wIndex[1] = timeout; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_hub_depth * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_hub_depth(struct usb_device *udev, struct mtx *mtx, uint16_t depth) { struct usb_device_request req; req.bmRequestType = UT_WRITE_CLASS_DEVICE; req.bRequest = UR_SET_HUB_DEPTH; USETW(req.wValue, depth); USETW(req.wIndex, 0); USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_clear_port_feature * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_clear_port_feature(struct usb_device *udev, struct mtx *mtx, uint8_t port, uint16_t sel) { struct usb_device_request req; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_CLEAR_FEATURE; USETW(req.wValue, sel); req.wIndex[0] = port; req.wIndex[1] = 0; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_port_feature * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_port_feature(struct usb_device *udev, struct mtx *mtx, uint8_t port, uint16_t sel) { struct usb_device_request req; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, sel); req.wIndex[0] = port; req.wIndex[1] = 0; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_protocol * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_protocol(struct usb_device *udev, struct mtx *mtx, uint8_t iface_index, uint16_t report) { struct usb_interface *iface = usbd_get_iface(udev, iface_index); struct usb_device_request req; if ((iface == NULL) || (iface->idesc == NULL)) { return (USB_ERR_INVAL); } DPRINTFN(5, "iface=%p, report=%d, endpt=%d\n", iface, report, iface->idesc->bInterfaceNumber); req.bmRequestType = UT_WRITE_CLASS_INTERFACE; req.bRequest = UR_SET_PROTOCOL; USETW(req.wValue, report); req.wIndex[0] = iface->idesc->bInterfaceNumber; req.wIndex[1] = 0; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_report * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_report(struct usb_device *udev, struct mtx *mtx, void *data, uint16_t len, uint8_t iface_index, uint8_t type, uint8_t id) { struct usb_interface *iface = usbd_get_iface(udev, iface_index); struct usb_device_request req; if ((iface == NULL) || (iface->idesc == NULL)) { return (USB_ERR_INVAL); } DPRINTFN(5, "len=%d\n", len); req.bmRequestType = UT_WRITE_CLASS_INTERFACE; req.bRequest = UR_SET_REPORT; USETW2(req.wValue, type, id); req.wIndex[0] = iface->idesc->bInterfaceNumber; req.wIndex[1] = 0; USETW(req.wLength, len); return (usbd_do_request(udev, mtx, &req, data)); } /*------------------------------------------------------------------------* * usbd_req_get_report * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_report(struct usb_device *udev, struct mtx *mtx, void *data, uint16_t len, uint8_t iface_index, uint8_t type, uint8_t id) { struct usb_interface *iface = usbd_get_iface(udev, iface_index); struct usb_device_request req; if ((iface == NULL) || (iface->idesc == NULL)) { return (USB_ERR_INVAL); } DPRINTFN(5, "len=%d\n", len); req.bmRequestType = UT_READ_CLASS_INTERFACE; req.bRequest = UR_GET_REPORT; USETW2(req.wValue, type, id); req.wIndex[0] = iface->idesc->bInterfaceNumber; req.wIndex[1] = 0; USETW(req.wLength, len); return (usbd_do_request(udev, mtx, &req, data)); } /*------------------------------------------------------------------------* * usbd_req_set_idle * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_idle(struct usb_device *udev, struct mtx *mtx, uint8_t iface_index, uint8_t duration, uint8_t id) { struct usb_interface *iface = usbd_get_iface(udev, iface_index); struct usb_device_request req; if ((iface == NULL) || (iface->idesc == NULL)) { return (USB_ERR_INVAL); } DPRINTFN(5, "%d %d\n", duration, id); req.bmRequestType = UT_WRITE_CLASS_INTERFACE; req.bRequest = UR_SET_IDLE; USETW2(req.wValue, duration, id); req.wIndex[0] = iface->idesc->bInterfaceNumber; req.wIndex[1] = 0; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_get_report_descriptor * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_report_descriptor(struct usb_device *udev, struct mtx *mtx, void *d, uint16_t size, uint8_t iface_index) { struct usb_interface *iface = usbd_get_iface(udev, iface_index); struct usb_device_request req; if ((iface == NULL) || (iface->idesc == NULL)) { return (USB_ERR_INVAL); } req.bmRequestType = UT_READ_INTERFACE; req.bRequest = UR_GET_DESCRIPTOR; USETW2(req.wValue, UDESC_REPORT, 0); /* report id should be 0 */ req.wIndex[0] = iface->idesc->bInterfaceNumber; req.wIndex[1] = 0; USETW(req.wLength, size); return (usbd_do_request(udev, mtx, &req, d)); } /*------------------------------------------------------------------------* * usbd_req_set_config * * This function is used to select the current configuration number in * both USB device side mode and USB host side mode. When setting the * configuration the function of the interfaces can change. * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_config(struct usb_device *udev, struct mtx *mtx, uint8_t conf) { struct usb_device_request req; DPRINTF("setting config %d\n", conf); /* do "set configuration" request */ req.bmRequestType = UT_WRITE_DEVICE; req.bRequest = UR_SET_CONFIG; req.wValue[0] = conf; req.wValue[1] = 0; USETW(req.wIndex, 0); USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_get_config * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_get_config(struct usb_device *udev, struct mtx *mtx, uint8_t *pconf) { struct usb_device_request req; req.bmRequestType = UT_READ_DEVICE; req.bRequest = UR_GET_CONFIG; USETW(req.wValue, 0); USETW(req.wIndex, 0); USETW(req.wLength, 1); return (usbd_do_request(udev, mtx, &req, pconf)); } /*------------------------------------------------------------------------* * usbd_setup_device_desc *------------------------------------------------------------------------*/ usb_error_t usbd_setup_device_desc(struct usb_device *udev, struct mtx *mtx) { usb_error_t err; /* * Get the first 8 bytes of the device descriptor ! * * NOTE: "usbd_do_request()" will check the device descriptor * next time we do a request to see if the maximum packet size * changed! The 8 first bytes of the device descriptor * contains the maximum packet size to use on control endpoint * 0. If this value is different from "USB_MAX_IPACKET" a new * USB control request will be setup! */ switch (udev->speed) { case USB_SPEED_FULL: if (usb_full_ddesc != 0) { /* get full device descriptor */ err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); if (err == 0) break; } /* get partial device descriptor, some devices crash on this */ err = usbd_req_get_desc(udev, mtx, NULL, &udev->ddesc, USB_MAX_IPACKET, USB_MAX_IPACKET, 0, UDESC_DEVICE, 0, 0); if (err != 0) break; /* get the full device descriptor */ err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); break; default: DPRINTF("Minimum bMaxPacketSize is large enough " "to hold the complete device descriptor or " "only one bMaxPacketSize choice\n"); /* get the full device descriptor */ err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); /* try one more time, if error */ if (err != 0) err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); break; } if (err != 0) { DPRINTFN(0, "getting device descriptor " "at addr %d failed, %s\n", udev->address, usbd_errstr(err)); return (err); } DPRINTF("adding unit addr=%d, rev=%02x, class=%d, " "subclass=%d, protocol=%d, maxpacket=%d, len=%d, speed=%d\n", udev->address, UGETW(udev->ddesc.bcdUSB), udev->ddesc.bDeviceClass, udev->ddesc.bDeviceSubClass, udev->ddesc.bDeviceProtocol, udev->ddesc.bMaxPacketSize, udev->ddesc.bLength, udev->speed); return (err); } /*------------------------------------------------------------------------* * usbd_req_re_enumerate * * NOTE: After this function returns the hardware is in the * unconfigured state! The application is responsible for setting a * new configuration. * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_re_enumerate(struct usb_device *udev, struct mtx *mtx) { struct usb_device *parent_hub; usb_error_t err; uint8_t old_addr; uint8_t do_retry = 1; if (udev->flags.usb_mode != USB_MODE_HOST) { return (USB_ERR_INVAL); } old_addr = udev->address; parent_hub = udev->parent_hub; if (parent_hub == NULL) { return (USB_ERR_INVAL); } retry: #if USB_HAVE_TT_SUPPORT /* * Try to reset the High Speed parent HUB of a LOW- or FULL- * speed device, if any. */ if (udev->parent_hs_hub != NULL && udev->speed != USB_SPEED_HIGH) { DPRINTF("Trying to reset parent High Speed TT.\n"); if (udev->parent_hs_hub == parent_hub && (uhub_count_active_host_ports(parent_hub, USB_SPEED_LOW) + uhub_count_active_host_ports(parent_hub, USB_SPEED_FULL)) == 1) { /* we can reset the whole TT */ err = usbd_req_reset_tt(parent_hub, NULL, udev->hs_port_no); } else { /* only reset a particular device and endpoint */ err = usbd_req_clear_tt_buffer(udev->parent_hs_hub, NULL, udev->hs_port_no, old_addr, UE_CONTROL, 0); } if (err) { DPRINTF("Resetting parent High " "Speed TT failed (%s).\n", usbd_errstr(err)); } } #endif /* Try to warm reset first */ if (parent_hub->speed == USB_SPEED_SUPER) usbd_req_warm_reset_port(parent_hub, mtx, udev->port_no); /* Try to reset the parent HUB port. */ err = usbd_req_reset_port(parent_hub, mtx, udev->port_no); if (err) { DPRINTFN(0, "addr=%d, port reset failed, %s\n", old_addr, usbd_errstr(err)); goto done; } /* * After that the port has been reset our device should be at * address zero: */ udev->address = USB_START_ADDR; /* reset "bMaxPacketSize" */ udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET; /* reset USB state */ usb_set_device_state(udev, USB_STATE_POWERED); /* * Restore device address: */ err = usbd_req_set_address(udev, mtx, old_addr); if (err) { /* XXX ignore any errors! */ DPRINTFN(0, "addr=%d, set address failed! (%s, ignored)\n", old_addr, usbd_errstr(err)); } /* * Restore device address, if the controller driver did not * set a new one: */ if (udev->address == USB_START_ADDR) udev->address = old_addr; /* setup the device descriptor and the initial "wMaxPacketSize" */ err = usbd_setup_device_desc(udev, mtx); done: if (err && do_retry) { /* give the USB firmware some time to load */ usb_pause_mtx(mtx, hz / 2); /* no more retries after this retry */ do_retry = 0; /* try again */ goto retry; } /* restore address */ if (udev->address == USB_START_ADDR) udev->address = old_addr; /* update state, if successful */ if (err == 0) usb_set_device_state(udev, USB_STATE_ADDRESSED); return (err); } /*------------------------------------------------------------------------* * usbd_req_clear_device_feature * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_clear_device_feature(struct usb_device *udev, struct mtx *mtx, uint16_t sel) { struct usb_device_request req; req.bmRequestType = UT_WRITE_DEVICE; req.bRequest = UR_CLEAR_FEATURE; USETW(req.wValue, sel); USETW(req.wIndex, 0); USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_device_feature * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_device_feature(struct usb_device *udev, struct mtx *mtx, uint16_t sel) { struct usb_device_request req; req.bmRequestType = UT_WRITE_DEVICE; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, sel); USETW(req.wIndex, 0); USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_reset_tt * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_reset_tt(struct usb_device *udev, struct mtx *mtx, uint8_t port) { struct usb_device_request req; /* For single TT HUBs the port should be 1 */ if (udev->ddesc.bDeviceClass == UDCLASS_HUB && udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) port = 1; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_RESET_TT; USETW(req.wValue, 0); req.wIndex[0] = port; req.wIndex[1] = 0; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_clear_tt_buffer * * For single TT HUBs the port should be 1. * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_clear_tt_buffer(struct usb_device *udev, struct mtx *mtx, uint8_t port, uint8_t addr, uint8_t type, uint8_t endpoint) { struct usb_device_request req; uint16_t wValue; /* For single TT HUBs the port should be 1 */ if (udev->ddesc.bDeviceClass == UDCLASS_HUB && udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) port = 1; wValue = (endpoint & 0xF) | ((addr & 0x7F) << 4) | ((endpoint & 0x80) << 8) | ((type & 3) << 12); req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_CLEAR_TT_BUFFER; USETW(req.wValue, wValue); req.wIndex[0] = port; req.wIndex[1] = 0; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_port_link_state * * USB 3.0 specific request * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_port_link_state(struct usb_device *udev, struct mtx *mtx, uint8_t port, uint8_t link_state) { struct usb_device_request req; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, UHF_PORT_LINK_STATE); req.wIndex[0] = port; req.wIndex[1] = link_state; USETW(req.wLength, 0); return (usbd_do_request(udev, mtx, &req, 0)); } /*------------------------------------------------------------------------* * usbd_req_set_lpm_info * * USB 2.0 specific request for Link Power Management. * * Returns: * 0: Success * USB_ERR_PENDING_REQUESTS: NYET * USB_ERR_TIMEOUT: TIMEOUT * USB_ERR_STALL: STALL * Else: Failure *------------------------------------------------------------------------*/ usb_error_t usbd_req_set_lpm_info(struct usb_device *udev, struct mtx *mtx, uint8_t port, uint8_t besl, uint8_t addr, uint8_t rwe) { struct usb_device_request req; usb_error_t err; uint8_t buf[1]; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_SET_AND_TEST; USETW(req.wValue, UHF_PORT_L1); req.wIndex[0] = (port & 0xF) | ((besl & 0xF) << 4); req.wIndex[1] = (addr & 0x7F) | (rwe ? 0x80 : 0x00); USETW(req.wLength, sizeof(buf)); /* set default value in case of short transfer */ buf[0] = 0x00; err = usbd_do_request(udev, mtx, &req, buf); if (err) return (err); switch (buf[0]) { case 0x00: /* SUCCESS */ break; case 0x10: /* NYET */ err = USB_ERR_PENDING_REQUESTS; break; case 0x11: /* TIMEOUT */ err = USB_ERR_TIMEOUT; break; case 0x30: /* STALL */ err = USB_ERR_STALLED; break; default: /* reserved */ err = USB_ERR_IOERROR; break; } return (err); } Index: stable/11 =================================================================== --- stable/11 (revision 343134) +++ stable/11 (revision 343135) Property changes on: stable/11 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r342778