Index: head/sys/arm/arm/generic_timer.c =================================================================== --- head/sys/arm/arm/generic_timer.c (revision 340597) +++ head/sys/arm/arm/generic_timer.c (revision 340598) @@ -1,595 +1,592 @@ /*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 2011 The FreeBSD Foundation * Copyright (c) 2013 Ruslan Bukin * All rights reserved. * * Based on mpcore_timer.c developed by Ben Gray * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /** * Cortex-A7, Cortex-A15, ARMv8 and later Generic Timer */ #include "opt_acpi.h" #include "opt_platform.h" #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(__arm__) #include /* For arm_set_delay */ #endif #ifdef FDT #include #include #include #endif #ifdef DEV_ACPI #include #include -#include "acpi_bus_if.h" #endif #define GT_CTRL_ENABLE (1 << 0) #define GT_CTRL_INT_MASK (1 << 1) #define GT_CTRL_INT_STAT (1 << 2) #define GT_REG_CTRL 0 #define GT_REG_TVAL 1 #define GT_CNTKCTL_PL0PTEN (1 << 9) /* PL0 Physical timer reg access */ #define GT_CNTKCTL_PL0VTEN (1 << 8) /* PL0 Virtual timer reg access */ #define GT_CNTKCTL_EVNTI (0xf << 4) /* Virtual counter event bits */ #define GT_CNTKCTL_EVNTDIR (1 << 3) /* Virtual counter event transition */ #define GT_CNTKCTL_EVNTEN (1 << 2) /* Enables virtual counter events */ #define GT_CNTKCTL_PL0VCTEN (1 << 1) /* PL0 CNTVCT and CNTFRQ access */ #define GT_CNTKCTL_PL0PCTEN (1 << 0) /* PL0 CNTPCT and CNTFRQ access */ struct arm_tmr_softc { struct resource *res[4]; void *ihl[4]; uint64_t (*get_cntxct)(bool); uint32_t clkfreq; struct eventtimer et; bool physical; }; static struct arm_tmr_softc *arm_tmr_sc = NULL; static struct resource_spec timer_spec[] = { { SYS_RES_IRQ, 0, RF_ACTIVE }, /* Secure */ { SYS_RES_IRQ, 1, RF_ACTIVE }, /* Non-secure */ { SYS_RES_IRQ, 2, RF_ACTIVE | RF_OPTIONAL }, /* Virt */ { SYS_RES_IRQ, 3, RF_ACTIVE | RF_OPTIONAL }, /* Hyp */ { -1, 0 } }; static uint32_t arm_tmr_fill_vdso_timehands(struct vdso_timehands *vdso_th, struct timecounter *tc); static void arm_tmr_do_delay(int usec, void *); static timecounter_get_t arm_tmr_get_timecount; static struct timecounter arm_tmr_timecount = { .tc_name = "ARM MPCore Timecounter", .tc_get_timecount = arm_tmr_get_timecount, .tc_poll_pps = NULL, .tc_counter_mask = ~0u, .tc_frequency = 0, .tc_quality = 1000, .tc_fill_vdso_timehands = arm_tmr_fill_vdso_timehands, }; #ifdef __arm__ #define get_el0(x) cp15_## x ##_get() #define get_el1(x) cp15_## x ##_get() #define set_el0(x, val) cp15_## x ##_set(val) #define set_el1(x, val) cp15_## x ##_set(val) #else /* __aarch64__ */ #define get_el0(x) READ_SPECIALREG(x ##_el0) #define get_el1(x) READ_SPECIALREG(x ##_el1) #define set_el0(x, val) WRITE_SPECIALREG(x ##_el0, val) #define set_el1(x, val) WRITE_SPECIALREG(x ##_el1, val) #endif static int get_freq(void) { return (get_el0(cntfrq)); } static uint64_t get_cntxct_a64_unstable(bool physical) { uint64_t val ; isb(); if (physical) { do { val = get_el0(cntpct); } while (((val + 1) & 0x7FF) <= 1); } else { do { val = get_el0(cntvct); } while (((val + 1) & 0x7FF) <= 1); } return (val); } static uint64_t get_cntxct(bool physical) { uint64_t val; isb(); if (physical) val = get_el0(cntpct); else val = get_el0(cntvct); return (val); } static int set_ctrl(uint32_t val, bool physical) { if (physical) set_el0(cntp_ctl, val); else set_el0(cntv_ctl, val); isb(); return (0); } static int set_tval(uint32_t val, bool physical) { if (physical) set_el0(cntp_tval, val); else set_el0(cntv_tval, val); isb(); return (0); } static int get_ctrl(bool physical) { uint32_t val; if (physical) val = get_el0(cntp_ctl); else val = get_el0(cntv_ctl); return (val); } static void setup_user_access(void *arg __unused) { uint32_t cntkctl; cntkctl = get_el1(cntkctl); cntkctl &= ~(GT_CNTKCTL_PL0PTEN | GT_CNTKCTL_PL0VTEN | GT_CNTKCTL_EVNTEN); if (arm_tmr_sc->physical) { cntkctl |= GT_CNTKCTL_PL0PCTEN; cntkctl &= ~GT_CNTKCTL_PL0VCTEN; } else { cntkctl |= GT_CNTKCTL_PL0VCTEN; cntkctl &= ~GT_CNTKCTL_PL0PCTEN; } set_el1(cntkctl, cntkctl); isb(); } static void tmr_setup_user_access(void *arg __unused) { if (arm_tmr_sc != NULL) smp_rendezvous(NULL, setup_user_access, NULL, NULL); } SYSINIT(tmr_ua, SI_SUB_SMP, SI_ORDER_ANY, tmr_setup_user_access, NULL); static unsigned arm_tmr_get_timecount(struct timecounter *tc) { return (arm_tmr_sc->get_cntxct(arm_tmr_sc->physical)); } static int arm_tmr_start(struct eventtimer *et, sbintime_t first, sbintime_t period __unused) { struct arm_tmr_softc *sc; int counts, ctrl; sc = (struct arm_tmr_softc *)et->et_priv; if (first != 0) { counts = ((uint32_t)et->et_frequency * first) >> 32; ctrl = get_ctrl(sc->physical); ctrl &= ~GT_CTRL_INT_MASK; ctrl |= GT_CTRL_ENABLE; set_tval(counts, sc->physical); set_ctrl(ctrl, sc->physical); return (0); } return (EINVAL); } static void arm_tmr_disable(bool physical) { int ctrl; ctrl = get_ctrl(physical); ctrl &= ~GT_CTRL_ENABLE; set_ctrl(ctrl, physical); } static int arm_tmr_stop(struct eventtimer *et) { struct arm_tmr_softc *sc; sc = (struct arm_tmr_softc *)et->et_priv; arm_tmr_disable(sc->physical); return (0); } static int arm_tmr_intr(void *arg) { struct arm_tmr_softc *sc; int ctrl; sc = (struct arm_tmr_softc *)arg; ctrl = get_ctrl(sc->physical); if (ctrl & GT_CTRL_INT_STAT) { ctrl |= GT_CTRL_INT_MASK; set_ctrl(ctrl, sc->physical); } if (sc->et.et_active) sc->et.et_event_cb(&sc->et, sc->et.et_arg); return (FILTER_HANDLED); } #ifdef FDT static int arm_tmr_fdt_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (ofw_bus_is_compatible(dev, "arm,armv8-timer")) { device_set_desc(dev, "ARMv8 Generic Timer"); return (BUS_PROBE_DEFAULT); } else if (ofw_bus_is_compatible(dev, "arm,armv7-timer")) { device_set_desc(dev, "ARMv7 Generic Timer"); return (BUS_PROBE_DEFAULT); } return (ENXIO); } #endif #ifdef DEV_ACPI static void arm_tmr_acpi_add_irq(device_t parent, device_t dev, int rid, u_int irq) { - irq = ACPI_BUS_MAP_INTR(parent, dev, irq, - INTR_TRIGGER_LEVEL, INTR_POLARITY_HIGH); BUS_SET_RESOURCE(parent, dev, SYS_RES_IRQ, rid, irq, 1); } static void arm_tmr_acpi_identify(driver_t *driver, device_t parent) { ACPI_TABLE_GTDT *gtdt; vm_paddr_t physaddr; device_t dev; physaddr = acpi_find_table(ACPI_SIG_GTDT); if (physaddr == 0) return; gtdt = acpi_map_table(physaddr, ACPI_SIG_GTDT); if (gtdt == NULL) { device_printf(parent, "gic: Unable to map the GTDT\n"); return; } dev = BUS_ADD_CHILD(parent, BUS_PASS_TIMER + BUS_PASS_ORDER_MIDDLE, "generic_timer", -1); if (dev == NULL) { device_printf(parent, "add gic child failed\n"); goto out; } arm_tmr_acpi_add_irq(parent, dev, 0, gtdt->SecureEl1Interrupt); arm_tmr_acpi_add_irq(parent, dev, 1, gtdt->NonSecureEl1Interrupt); arm_tmr_acpi_add_irq(parent, dev, 2, gtdt->VirtualTimerInterrupt); out: acpi_unmap_table(gtdt); } static int arm_tmr_acpi_probe(device_t dev) { device_set_desc(dev, "ARM Generic Timer"); return (BUS_PROBE_NOWILDCARD); } #endif static int arm_tmr_attach(device_t dev) { struct arm_tmr_softc *sc; #ifdef FDT phandle_t node; pcell_t clock; #endif int error; int i; sc = device_get_softc(dev); if (arm_tmr_sc) return (ENXIO); sc->get_cntxct = &get_cntxct; #ifdef FDT /* Get the base clock frequency */ node = ofw_bus_get_node(dev); if (node > 0) { error = OF_getencprop(node, "clock-frequency", &clock, sizeof(clock)); if (error > 0) sc->clkfreq = clock; if (OF_hasprop(node, "allwinner,sun50i-a64-unstable-timer")) { sc->get_cntxct = &get_cntxct_a64_unstable; if (bootverbose) device_printf(dev, "Enabling allwinner unstable timer workaround\n"); } } #endif if (sc->clkfreq == 0) { /* Try to get clock frequency from timer */ sc->clkfreq = get_freq(); } if (sc->clkfreq == 0) { device_printf(dev, "No clock frequency specified\n"); return (ENXIO); } if (bus_alloc_resources(dev, timer_spec, sc->res)) { device_printf(dev, "could not allocate resources\n"); return (ENXIO); } #ifdef __arm__ sc->physical = true; #else /* __aarch64__ */ /* If we do not have a virtual timer use the physical. */ sc->physical = (sc->res[2] == NULL) ? true : false; #endif arm_tmr_sc = sc; /* Setup secure, non-secure and virtual IRQs handler */ for (i = 0; i < 3; i++) { /* If we do not have the interrupt, skip it. */ if (sc->res[i] == NULL) continue; error = bus_setup_intr(dev, sc->res[i], INTR_TYPE_CLK, arm_tmr_intr, NULL, sc, &sc->ihl[i]); if (error) { device_printf(dev, "Unable to alloc int resource.\n"); return (ENXIO); } } /* Disable the virtual timer until we are ready */ if (sc->res[2] != NULL) arm_tmr_disable(false); /* And the physical */ if (sc->physical) arm_tmr_disable(true); arm_tmr_timecount.tc_frequency = sc->clkfreq; tc_init(&arm_tmr_timecount); sc->et.et_name = "ARM MPCore Eventtimer"; sc->et.et_flags = ET_FLAGS_ONESHOT | ET_FLAGS_PERCPU; sc->et.et_quality = 1000; sc->et.et_frequency = sc->clkfreq; sc->et.et_min_period = (0x00000010LLU << 32) / sc->et.et_frequency; sc->et.et_max_period = (0xfffffffeLLU << 32) / sc->et.et_frequency; sc->et.et_start = arm_tmr_start; sc->et.et_stop = arm_tmr_stop; sc->et.et_priv = sc; et_register(&sc->et); #if defined(__arm__) arm_set_delay(arm_tmr_do_delay, sc); #endif return (0); } #ifdef FDT static device_method_t arm_tmr_fdt_methods[] = { DEVMETHOD(device_probe, arm_tmr_fdt_probe), DEVMETHOD(device_attach, arm_tmr_attach), { 0, 0 } }; static driver_t arm_tmr_fdt_driver = { "generic_timer", arm_tmr_fdt_methods, sizeof(struct arm_tmr_softc), }; static devclass_t arm_tmr_fdt_devclass; EARLY_DRIVER_MODULE(timer, simplebus, arm_tmr_fdt_driver, arm_tmr_fdt_devclass, 0, 0, BUS_PASS_TIMER + BUS_PASS_ORDER_MIDDLE); EARLY_DRIVER_MODULE(timer, ofwbus, arm_tmr_fdt_driver, arm_tmr_fdt_devclass, 0, 0, BUS_PASS_TIMER + BUS_PASS_ORDER_MIDDLE); #endif #ifdef DEV_ACPI static device_method_t arm_tmr_acpi_methods[] = { DEVMETHOD(device_identify, arm_tmr_acpi_identify), DEVMETHOD(device_probe, arm_tmr_acpi_probe), DEVMETHOD(device_attach, arm_tmr_attach), { 0, 0 } }; static driver_t arm_tmr_acpi_driver = { "generic_timer", arm_tmr_acpi_methods, sizeof(struct arm_tmr_softc), }; static devclass_t arm_tmr_acpi_devclass; EARLY_DRIVER_MODULE(timer, acpi, arm_tmr_acpi_driver, arm_tmr_acpi_devclass, 0, 0, BUS_PASS_TIMER + BUS_PASS_ORDER_MIDDLE); #endif static void arm_tmr_do_delay(int usec, void *arg) { struct arm_tmr_softc *sc = arg; int32_t counts, counts_per_usec; uint32_t first, last; /* Get the number of times to count */ counts_per_usec = ((arm_tmr_timecount.tc_frequency / 1000000) + 1); /* * Clamp the timeout at a maximum value (about 32 seconds with * a 66MHz clock). *Nobody* should be delay()ing for anywhere * near that length of time and if they are, they should be hung * out to dry. */ if (usec >= (0x80000000U / counts_per_usec)) counts = (0x80000000U / counts_per_usec) - 1; else counts = usec * counts_per_usec; first = sc->get_cntxct(sc->physical); while (counts > 0) { last = sc->get_cntxct(sc->physical); counts -= (int32_t)(last - first); first = last; } } #if defined(__aarch64__) void DELAY(int usec) { int32_t counts; TSENTER(); /* * Check the timers are setup, if not just * use a for loop for the meantime */ if (arm_tmr_sc == NULL) { for (; usec > 0; usec--) for (counts = 200; counts > 0; counts--) /* * Prevent the compiler from optimizing * out the loop */ cpufunc_nullop(); } else arm_tmr_do_delay(usec, arm_tmr_sc); TSEXIT(); } #endif static uint32_t arm_tmr_fill_vdso_timehands(struct vdso_timehands *vdso_th, struct timecounter *tc) { vdso_th->th_algo = VDSO_TH_ALGO_ARM_GENTIM; vdso_th->th_physical = arm_tmr_sc->physical; bzero(vdso_th->th_res, sizeof(vdso_th->th_res)); return (1); } Index: head/sys/dev/acpica/acpi.c =================================================================== --- head/sys/dev/acpica/acpi.c (revision 340597) +++ head/sys/dev/acpica/acpi.c (revision 340598) @@ -1,4305 +1,4312 @@ /*- * Copyright (c) 2000 Takanori Watanabe * Copyright (c) 2000 Mitsuru IWASAKI * Copyright (c) 2000, 2001 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_acpi.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(__i386__) || defined(__amd64__) #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include static MALLOC_DEFINE(M_ACPIDEV, "acpidev", "ACPI devices"); /* Hooks for the ACPI CA debugging infrastructure */ #define _COMPONENT ACPI_BUS ACPI_MODULE_NAME("ACPI") static d_open_t acpiopen; static d_close_t acpiclose; static d_ioctl_t acpiioctl; static struct cdevsw acpi_cdevsw = { .d_version = D_VERSION, .d_open = acpiopen, .d_close = acpiclose, .d_ioctl = acpiioctl, .d_name = "acpi", }; struct acpi_interface { ACPI_STRING *data; int num; }; static char *sysres_ids[] = { "PNP0C01", "PNP0C02", NULL }; static char *pcilink_ids[] = { "PNP0C0F", NULL }; /* Global mutex for locking access to the ACPI subsystem. */ struct mtx acpi_mutex; struct callout acpi_sleep_timer; /* Bitmap of device quirks. */ int acpi_quirks; /* Supported sleep states. */ static BOOLEAN acpi_sleep_states[ACPI_S_STATE_COUNT]; static void acpi_lookup(void *arg, const char *name, device_t *dev); static int acpi_modevent(struct module *mod, int event, void *junk); static int acpi_probe(device_t dev); static int acpi_attach(device_t dev); static int acpi_suspend(device_t dev); static int acpi_resume(device_t dev); static int acpi_shutdown(device_t dev); static device_t acpi_add_child(device_t bus, u_int order, const char *name, int unit); static int acpi_print_child(device_t bus, device_t child); static void acpi_probe_nomatch(device_t bus, device_t child); static void acpi_driver_added(device_t dev, driver_t *driver); static int acpi_read_ivar(device_t dev, device_t child, int index, uintptr_t *result); static int acpi_write_ivar(device_t dev, device_t child, int index, uintptr_t value); static struct resource_list *acpi_get_rlist(device_t dev, device_t child); static void acpi_reserve_resources(device_t dev); static int acpi_sysres_alloc(device_t dev); static int acpi_set_resource(device_t dev, device_t child, int type, int rid, rman_res_t start, rman_res_t count); static struct resource *acpi_alloc_resource(device_t bus, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags); static int acpi_adjust_resource(device_t bus, device_t child, int type, struct resource *r, rman_res_t start, rman_res_t end); static int acpi_release_resource(device_t bus, device_t child, int type, int rid, struct resource *r); static void acpi_delete_resource(device_t bus, device_t child, int type, int rid); static uint32_t acpi_isa_get_logicalid(device_t dev); static int acpi_isa_get_compatid(device_t dev, uint32_t *cids, int count); static int acpi_device_id_probe(device_t bus, device_t dev, char **ids, char **match); static ACPI_STATUS acpi_device_eval_obj(device_t bus, device_t dev, ACPI_STRING pathname, ACPI_OBJECT_LIST *parameters, ACPI_BUFFER *ret); static ACPI_STATUS acpi_device_scan_cb(ACPI_HANDLE h, UINT32 level, void *context, void **retval); static ACPI_STATUS acpi_device_scan_children(device_t bus, device_t dev, int max_depth, acpi_scan_cb_t user_fn, void *arg); static int acpi_set_powerstate(device_t child, int state); static int acpi_isa_pnp_probe(device_t bus, device_t child, struct isa_pnp_id *ids); static void acpi_probe_children(device_t bus); static void acpi_probe_order(ACPI_HANDLE handle, int *order); static ACPI_STATUS acpi_probe_child(ACPI_HANDLE handle, UINT32 level, void *context, void **status); static void acpi_sleep_enable(void *arg); static ACPI_STATUS acpi_sleep_disable(struct acpi_softc *sc); static ACPI_STATUS acpi_EnterSleepState(struct acpi_softc *sc, int state); static void acpi_shutdown_final(void *arg, int howto); static void acpi_enable_fixed_events(struct acpi_softc *sc); static BOOLEAN acpi_has_hid(ACPI_HANDLE handle); static void acpi_resync_clock(struct acpi_softc *sc); static int acpi_wake_sleep_prep(ACPI_HANDLE handle, int sstate); static int acpi_wake_run_prep(ACPI_HANDLE handle, int sstate); static int acpi_wake_prep_walk(int sstate); static int acpi_wake_sysctl_walk(device_t dev); static int acpi_wake_set_sysctl(SYSCTL_HANDLER_ARGS); static void acpi_system_eventhandler_sleep(void *arg, int state); static void acpi_system_eventhandler_wakeup(void *arg, int state); static int acpi_sname2sstate(const char *sname); static const char *acpi_sstate2sname(int sstate); static int acpi_supported_sleep_state_sysctl(SYSCTL_HANDLER_ARGS); static int acpi_sleep_state_sysctl(SYSCTL_HANDLER_ARGS); static int acpi_debug_objects_sysctl(SYSCTL_HANDLER_ARGS); static int acpi_pm_func(u_long cmd, void *arg, ...); static int acpi_child_location_str_method(device_t acdev, device_t child, char *buf, size_t buflen); static int acpi_child_pnpinfo_str_method(device_t acdev, device_t child, char *buf, size_t buflen); #if defined(__i386__) || defined(__amd64__) static void acpi_enable_pcie(void); #endif static void acpi_hint_device_unit(device_t acdev, device_t child, const char *name, int *unitp); static void acpi_reset_interfaces(device_t dev); static device_method_t acpi_methods[] = { /* Device interface */ DEVMETHOD(device_probe, acpi_probe), DEVMETHOD(device_attach, acpi_attach), DEVMETHOD(device_shutdown, acpi_shutdown), DEVMETHOD(device_detach, bus_generic_detach), DEVMETHOD(device_suspend, acpi_suspend), DEVMETHOD(device_resume, acpi_resume), /* Bus interface */ DEVMETHOD(bus_add_child, acpi_add_child), DEVMETHOD(bus_print_child, acpi_print_child), DEVMETHOD(bus_probe_nomatch, acpi_probe_nomatch), DEVMETHOD(bus_driver_added, acpi_driver_added), DEVMETHOD(bus_read_ivar, acpi_read_ivar), DEVMETHOD(bus_write_ivar, acpi_write_ivar), DEVMETHOD(bus_get_resource_list, acpi_get_rlist), DEVMETHOD(bus_set_resource, acpi_set_resource), DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource), DEVMETHOD(bus_alloc_resource, acpi_alloc_resource), DEVMETHOD(bus_adjust_resource, acpi_adjust_resource), DEVMETHOD(bus_release_resource, acpi_release_resource), DEVMETHOD(bus_delete_resource, acpi_delete_resource), DEVMETHOD(bus_child_pnpinfo_str, acpi_child_pnpinfo_str_method), DEVMETHOD(bus_child_location_str, acpi_child_location_str_method), DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), DEVMETHOD(bus_hint_device_unit, acpi_hint_device_unit), DEVMETHOD(bus_get_cpus, acpi_get_cpus), DEVMETHOD(bus_get_domain, acpi_get_domain), /* ACPI bus */ DEVMETHOD(acpi_id_probe, acpi_device_id_probe), DEVMETHOD(acpi_evaluate_object, acpi_device_eval_obj), DEVMETHOD(acpi_pwr_for_sleep, acpi_device_pwr_for_sleep), DEVMETHOD(acpi_scan_children, acpi_device_scan_children), /* ISA emulation */ DEVMETHOD(isa_pnp_probe, acpi_isa_pnp_probe), DEVMETHOD_END }; static driver_t acpi_driver = { "acpi", acpi_methods, sizeof(struct acpi_softc), }; static devclass_t acpi_devclass; DRIVER_MODULE(acpi, nexus, acpi_driver, acpi_devclass, acpi_modevent, 0); MODULE_VERSION(acpi, 1); ACPI_SERIAL_DECL(acpi, "ACPI root bus"); /* Local pools for managing system resources for ACPI child devices. */ static struct rman acpi_rman_io, acpi_rman_mem; #define ACPI_MINIMUM_AWAKETIME 5 /* Holds the description of the acpi0 device. */ static char acpi_desc[ACPI_OEM_ID_SIZE + ACPI_OEM_TABLE_ID_SIZE + 2]; SYSCTL_NODE(_debug, OID_AUTO, acpi, CTLFLAG_RD, NULL, "ACPI debugging"); static char acpi_ca_version[12]; SYSCTL_STRING(_debug_acpi, OID_AUTO, acpi_ca_version, CTLFLAG_RD, acpi_ca_version, 0, "Version of Intel ACPI-CA"); /* * Allow overriding _OSI methods. */ static char acpi_install_interface[256]; TUNABLE_STR("hw.acpi.install_interface", acpi_install_interface, sizeof(acpi_install_interface)); static char acpi_remove_interface[256]; TUNABLE_STR("hw.acpi.remove_interface", acpi_remove_interface, sizeof(acpi_remove_interface)); /* Allow users to dump Debug objects without ACPI debugger. */ static int acpi_debug_objects; TUNABLE_INT("debug.acpi.enable_debug_objects", &acpi_debug_objects); SYSCTL_PROC(_debug_acpi, OID_AUTO, enable_debug_objects, CTLFLAG_RW | CTLTYPE_INT, NULL, 0, acpi_debug_objects_sysctl, "I", "Enable Debug objects"); /* Allow the interpreter to ignore common mistakes in BIOS. */ static int acpi_interpreter_slack = 1; TUNABLE_INT("debug.acpi.interpreter_slack", &acpi_interpreter_slack); SYSCTL_INT(_debug_acpi, OID_AUTO, interpreter_slack, CTLFLAG_RDTUN, &acpi_interpreter_slack, 1, "Turn on interpreter slack mode."); /* Ignore register widths set by FADT and use default widths instead. */ static int acpi_ignore_reg_width = 1; TUNABLE_INT("debug.acpi.default_register_width", &acpi_ignore_reg_width); SYSCTL_INT(_debug_acpi, OID_AUTO, default_register_width, CTLFLAG_RDTUN, &acpi_ignore_reg_width, 1, "Ignore register widths set by FADT"); /* Allow users to override quirks. */ TUNABLE_INT("debug.acpi.quirks", &acpi_quirks); int acpi_susp_bounce; SYSCTL_INT(_debug_acpi, OID_AUTO, suspend_bounce, CTLFLAG_RW, &acpi_susp_bounce, 0, "Don't actually suspend, just test devices."); /* * ACPI can only be loaded as a module by the loader; activating it after * system bootstrap time is not useful, and can be fatal to the system. * It also cannot be unloaded, since the entire system bus hierarchy hangs * off it. */ static int acpi_modevent(struct module *mod, int event, void *junk) { switch (event) { case MOD_LOAD: if (!cold) { printf("The ACPI driver cannot be loaded after boot.\n"); return (EPERM); } break; case MOD_UNLOAD: if (!cold && power_pm_get_type() == POWER_PM_TYPE_ACPI) return (EBUSY); break; default: break; } return (0); } /* * Perform early initialization. */ ACPI_STATUS acpi_Startup(void) { static int started = 0; ACPI_STATUS status; int val; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); /* Only run the startup code once. The MADT driver also calls this. */ if (started) return_VALUE (AE_OK); started = 1; /* * Initialize the ACPICA subsystem. */ if (ACPI_FAILURE(status = AcpiInitializeSubsystem())) { printf("ACPI: Could not initialize Subsystem: %s\n", AcpiFormatException(status)); return_VALUE (status); } /* * Pre-allocate space for RSDT/XSDT and DSDT tables and allow resizing * if more tables exist. */ if (ACPI_FAILURE(status = AcpiInitializeTables(NULL, 2, TRUE))) { printf("ACPI: Table initialisation failed: %s\n", AcpiFormatException(status)); return_VALUE (status); } /* Set up any quirks we have for this system. */ if (acpi_quirks == ACPI_Q_OK) acpi_table_quirks(&acpi_quirks); /* If the user manually set the disabled hint to 0, force-enable ACPI. */ if (resource_int_value("acpi", 0, "disabled", &val) == 0 && val == 0) acpi_quirks &= ~ACPI_Q_BROKEN; if (acpi_quirks & ACPI_Q_BROKEN) { printf("ACPI disabled by blacklist. Contact your BIOS vendor.\n"); status = AE_SUPPORT; } return_VALUE (status); } /* * Detect ACPI and perform early initialisation. */ int acpi_identify(void) { ACPI_TABLE_RSDP *rsdp; ACPI_TABLE_HEADER *rsdt; ACPI_PHYSICAL_ADDRESS paddr; struct sbuf sb; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); if (!cold) return (ENXIO); /* Check that we haven't been disabled with a hint. */ if (resource_disabled("acpi", 0)) return (ENXIO); /* Check for other PM systems. */ if (power_pm_get_type() != POWER_PM_TYPE_NONE && power_pm_get_type() != POWER_PM_TYPE_ACPI) { printf("ACPI identify failed, other PM system enabled.\n"); return (ENXIO); } /* Initialize root tables. */ if (ACPI_FAILURE(acpi_Startup())) { printf("ACPI: Try disabling either ACPI or apic support.\n"); return (ENXIO); } if ((paddr = AcpiOsGetRootPointer()) == 0 || (rsdp = AcpiOsMapMemory(paddr, sizeof(ACPI_TABLE_RSDP))) == NULL) return (ENXIO); if (rsdp->Revision > 1 && rsdp->XsdtPhysicalAddress != 0) paddr = (ACPI_PHYSICAL_ADDRESS)rsdp->XsdtPhysicalAddress; else paddr = (ACPI_PHYSICAL_ADDRESS)rsdp->RsdtPhysicalAddress; AcpiOsUnmapMemory(rsdp, sizeof(ACPI_TABLE_RSDP)); if ((rsdt = AcpiOsMapMemory(paddr, sizeof(ACPI_TABLE_HEADER))) == NULL) return (ENXIO); sbuf_new(&sb, acpi_desc, sizeof(acpi_desc), SBUF_FIXEDLEN); sbuf_bcat(&sb, rsdt->OemId, ACPI_OEM_ID_SIZE); sbuf_trim(&sb); sbuf_putc(&sb, ' '); sbuf_bcat(&sb, rsdt->OemTableId, ACPI_OEM_TABLE_ID_SIZE); sbuf_trim(&sb); sbuf_finish(&sb); sbuf_delete(&sb); AcpiOsUnmapMemory(rsdt, sizeof(ACPI_TABLE_HEADER)); snprintf(acpi_ca_version, sizeof(acpi_ca_version), "%x", ACPI_CA_VERSION); return (0); } /* * Fetch some descriptive data from ACPI to put in our attach message. */ static int acpi_probe(device_t dev) { ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); device_set_desc(dev, acpi_desc); return_VALUE (BUS_PROBE_NOWILDCARD); } static int acpi_attach(device_t dev) { struct acpi_softc *sc; ACPI_STATUS status; int error, state; UINT32 flags; UINT8 TypeA, TypeB; char *env; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); sc = device_get_softc(dev); sc->acpi_dev = dev; callout_init(&sc->susp_force_to, 1); error = ENXIO; /* Initialize resource manager. */ acpi_rman_io.rm_type = RMAN_ARRAY; acpi_rman_io.rm_start = 0; acpi_rman_io.rm_end = 0xffff; acpi_rman_io.rm_descr = "ACPI I/O ports"; if (rman_init(&acpi_rman_io) != 0) panic("acpi rman_init IO ports failed"); acpi_rman_mem.rm_type = RMAN_ARRAY; acpi_rman_mem.rm_descr = "ACPI I/O memory addresses"; if (rman_init(&acpi_rman_mem) != 0) panic("acpi rman_init memory failed"); /* Initialise the ACPI mutex */ mtx_init(&acpi_mutex, "ACPI global lock", NULL, MTX_DEF); /* * Set the globals from our tunables. This is needed because ACPI-CA * uses UINT8 for some values and we have no tunable_byte. */ AcpiGbl_EnableInterpreterSlack = acpi_interpreter_slack ? TRUE : FALSE; AcpiGbl_EnableAmlDebugObject = acpi_debug_objects ? TRUE : FALSE; AcpiGbl_UseDefaultRegisterWidths = acpi_ignore_reg_width ? TRUE : FALSE; #ifndef ACPI_DEBUG /* * Disable all debugging layers and levels. */ AcpiDbgLayer = 0; AcpiDbgLevel = 0; #endif /* Override OS interfaces if the user requested. */ acpi_reset_interfaces(dev); /* Load ACPI name space. */ status = AcpiLoadTables(); if (ACPI_FAILURE(status)) { device_printf(dev, "Could not load Namespace: %s\n", AcpiFormatException(status)); goto out; } #if defined(__i386__) || defined(__amd64__) /* Handle MCFG table if present. */ acpi_enable_pcie(); #endif /* * Note that some systems (specifically, those with namespace evaluation * issues that require the avoidance of parts of the namespace) must * avoid running _INI and _STA on everything, as well as dodging the final * object init pass. * * For these devices, we set ACPI_NO_DEVICE_INIT and ACPI_NO_OBJECT_INIT). * * XXX We should arrange for the object init pass after we have attached * all our child devices, but on many systems it works here. */ flags = 0; if (testenv("debug.acpi.avoid")) flags = ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT; /* Bring the hardware and basic handlers online. */ if (ACPI_FAILURE(status = AcpiEnableSubsystem(flags))) { device_printf(dev, "Could not enable ACPI: %s\n", AcpiFormatException(status)); goto out; } /* * Call the ECDT probe function to provide EC functionality before * the namespace has been evaluated. * * XXX This happens before the sysresource devices have been probed and * attached so its resources come from nexus0. In practice, this isn't * a problem but should be addressed eventually. */ acpi_ec_ecdt_probe(dev); /* Bring device objects and regions online. */ if (ACPI_FAILURE(status = AcpiInitializeObjects(flags))) { device_printf(dev, "Could not initialize ACPI objects: %s\n", AcpiFormatException(status)); goto out; } /* * Setup our sysctl tree. * * XXX: This doesn't check to make sure that none of these fail. */ sysctl_ctx_init(&sc->acpi_sysctl_ctx); sc->acpi_sysctl_tree = SYSCTL_ADD_NODE(&sc->acpi_sysctl_ctx, SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO, device_get_name(dev), CTLFLAG_RD, 0, ""); SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "supported_sleep_state", CTLTYPE_STRING | CTLFLAG_RD, 0, 0, acpi_supported_sleep_state_sysctl, "A", "List supported ACPI sleep states."); SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "power_button_state", CTLTYPE_STRING | CTLFLAG_RW, &sc->acpi_power_button_sx, 0, acpi_sleep_state_sysctl, "A", "Power button ACPI sleep state."); SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "sleep_button_state", CTLTYPE_STRING | CTLFLAG_RW, &sc->acpi_sleep_button_sx, 0, acpi_sleep_state_sysctl, "A", "Sleep button ACPI sleep state."); SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "lid_switch_state", CTLTYPE_STRING | CTLFLAG_RW, &sc->acpi_lid_switch_sx, 0, acpi_sleep_state_sysctl, "A", "Lid ACPI sleep state. Set to S3 if you want to suspend your laptop when close the Lid."); SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "standby_state", CTLTYPE_STRING | CTLFLAG_RW, &sc->acpi_standby_sx, 0, acpi_sleep_state_sysctl, "A", ""); SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "suspend_state", CTLTYPE_STRING | CTLFLAG_RW, &sc->acpi_suspend_sx, 0, acpi_sleep_state_sysctl, "A", ""); SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "sleep_delay", CTLFLAG_RW, &sc->acpi_sleep_delay, 0, "sleep delay in seconds"); SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "s4bios", CTLFLAG_RW, &sc->acpi_s4bios, 0, "S4BIOS mode"); SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "verbose", CTLFLAG_RW, &sc->acpi_verbose, 0, "verbose mode"); SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "disable_on_reboot", CTLFLAG_RW, &sc->acpi_do_disable, 0, "Disable ACPI when rebooting/halting system"); SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), OID_AUTO, "handle_reboot", CTLFLAG_RW, &sc->acpi_handle_reboot, 0, "Use ACPI Reset Register to reboot"); /* * Default to 1 second before sleeping to give some machines time to * stabilize. */ sc->acpi_sleep_delay = 1; if (bootverbose) sc->acpi_verbose = 1; if ((env = kern_getenv("hw.acpi.verbose")) != NULL) { if (strcmp(env, "0") != 0) sc->acpi_verbose = 1; freeenv(env); } /* Only enable reboot by default if the FADT says it is available. */ if (AcpiGbl_FADT.Flags & ACPI_FADT_RESET_REGISTER) sc->acpi_handle_reboot = 1; #if !ACPI_REDUCED_HARDWARE /* Only enable S4BIOS by default if the FACS says it is available. */ if (AcpiGbl_FACS != NULL && AcpiGbl_FACS->Flags & ACPI_FACS_S4_BIOS_PRESENT) sc->acpi_s4bios = 1; #endif /* Probe all supported sleep states. */ acpi_sleep_states[ACPI_STATE_S0] = TRUE; for (state = ACPI_STATE_S1; state < ACPI_S_STATE_COUNT; state++) if (ACPI_SUCCESS(AcpiEvaluateObject(ACPI_ROOT_OBJECT, __DECONST(char *, AcpiGbl_SleepStateNames[state]), NULL, NULL)) && ACPI_SUCCESS(AcpiGetSleepTypeData(state, &TypeA, &TypeB))) acpi_sleep_states[state] = TRUE; /* * Dispatch the default sleep state to devices. The lid switch is set * to UNKNOWN by default to avoid surprising users. */ sc->acpi_power_button_sx = acpi_sleep_states[ACPI_STATE_S5] ? ACPI_STATE_S5 : ACPI_STATE_UNKNOWN; sc->acpi_lid_switch_sx = ACPI_STATE_UNKNOWN; sc->acpi_standby_sx = acpi_sleep_states[ACPI_STATE_S1] ? ACPI_STATE_S1 : ACPI_STATE_UNKNOWN; sc->acpi_suspend_sx = acpi_sleep_states[ACPI_STATE_S3] ? ACPI_STATE_S3 : ACPI_STATE_UNKNOWN; /* Pick the first valid sleep state for the sleep button default. */ sc->acpi_sleep_button_sx = ACPI_STATE_UNKNOWN; for (state = ACPI_STATE_S1; state <= ACPI_STATE_S4; state++) if (acpi_sleep_states[state]) { sc->acpi_sleep_button_sx = state; break; } acpi_enable_fixed_events(sc); /* * Scan the namespace and attach/initialise children. */ /* Register our shutdown handler. */ EVENTHANDLER_REGISTER(shutdown_final, acpi_shutdown_final, sc, SHUTDOWN_PRI_LAST); /* * Register our acpi event handlers. * XXX should be configurable eg. via userland policy manager. */ EVENTHANDLER_REGISTER(acpi_sleep_event, acpi_system_eventhandler_sleep, sc, ACPI_EVENT_PRI_LAST); EVENTHANDLER_REGISTER(acpi_wakeup_event, acpi_system_eventhandler_wakeup, sc, ACPI_EVENT_PRI_LAST); /* Flag our initial states. */ sc->acpi_enabled = TRUE; sc->acpi_sstate = ACPI_STATE_S0; sc->acpi_sleep_disabled = TRUE; /* Create the control device */ sc->acpi_dev_t = make_dev(&acpi_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0664, "acpi"); sc->acpi_dev_t->si_drv1 = sc; if ((error = acpi_machdep_init(dev))) goto out; /* Register ACPI again to pass the correct argument of pm_func. */ power_pm_register(POWER_PM_TYPE_ACPI, acpi_pm_func, sc); if (!acpi_disabled("bus")) { EVENTHANDLER_REGISTER(dev_lookup, acpi_lookup, NULL, 1000); acpi_probe_children(dev); } /* Update all GPEs and enable runtime GPEs. */ status = AcpiUpdateAllGpes(); if (ACPI_FAILURE(status)) device_printf(dev, "Could not update all GPEs: %s\n", AcpiFormatException(status)); /* Allow sleep request after a while. */ callout_init_mtx(&acpi_sleep_timer, &acpi_mutex, 0); callout_reset(&acpi_sleep_timer, hz * ACPI_MINIMUM_AWAKETIME, acpi_sleep_enable, sc); error = 0; out: return_VALUE (error); } static void acpi_set_power_children(device_t dev, int state) { device_t child; device_t *devlist; int dstate, i, numdevs; if (device_get_children(dev, &devlist, &numdevs) != 0) return; /* * Retrieve and set D-state for the sleep state if _SxD is present. * Skip children who aren't attached since they are handled separately. */ for (i = 0; i < numdevs; i++) { child = devlist[i]; dstate = state; if (device_is_attached(child) && acpi_device_pwr_for_sleep(dev, child, &dstate) == 0) acpi_set_powerstate(child, dstate); } free(devlist, M_TEMP); } static int acpi_suspend(device_t dev) { int error; GIANT_REQUIRED; error = bus_generic_suspend(dev); if (error == 0) acpi_set_power_children(dev, ACPI_STATE_D3); return (error); } static int acpi_resume(device_t dev) { GIANT_REQUIRED; acpi_set_power_children(dev, ACPI_STATE_D0); return (bus_generic_resume(dev)); } static int acpi_shutdown(device_t dev) { GIANT_REQUIRED; /* Allow children to shutdown first. */ bus_generic_shutdown(dev); /* * Enable any GPEs that are able to power-on the system (i.e., RTC). * Also, disable any that are not valid for this state (most). */ acpi_wake_prep_walk(ACPI_STATE_S5); return (0); } /* * Handle a new device being added */ static device_t acpi_add_child(device_t bus, u_int order, const char *name, int unit) { struct acpi_device *ad; device_t child; if ((ad = malloc(sizeof(*ad), M_ACPIDEV, M_NOWAIT | M_ZERO)) == NULL) return (NULL); resource_list_init(&ad->ad_rl); child = device_add_child_ordered(bus, order, name, unit); if (child != NULL) device_set_ivars(child, ad); else free(ad, M_ACPIDEV); return (child); } static int acpi_print_child(device_t bus, device_t child) { struct acpi_device *adev = device_get_ivars(child); struct resource_list *rl = &adev->ad_rl; int retval = 0; retval += bus_print_child_header(bus, child); retval += resource_list_print_type(rl, "port", SYS_RES_IOPORT, "%#jx"); retval += resource_list_print_type(rl, "iomem", SYS_RES_MEMORY, "%#jx"); retval += resource_list_print_type(rl, "irq", SYS_RES_IRQ, "%jd"); retval += resource_list_print_type(rl, "drq", SYS_RES_DRQ, "%jd"); if (device_get_flags(child)) retval += printf(" flags %#x", device_get_flags(child)); retval += bus_print_child_domain(bus, child); retval += bus_print_child_footer(bus, child); return (retval); } /* * If this device is an ACPI child but no one claimed it, attempt * to power it off. We'll power it back up when a driver is added. * * XXX Disabled for now since many necessary devices (like fdc and * ATA) don't claim the devices we created for them but still expect * them to be powered up. */ static void acpi_probe_nomatch(device_t bus, device_t child) { #ifdef ACPI_ENABLE_POWERDOWN_NODRIVER acpi_set_powerstate(child, ACPI_STATE_D3); #endif } /* * If a new driver has a chance to probe a child, first power it up. * * XXX Disabled for now (see acpi_probe_nomatch for details). */ static void acpi_driver_added(device_t dev, driver_t *driver) { device_t child, *devlist; int i, numdevs; DEVICE_IDENTIFY(driver, dev); if (device_get_children(dev, &devlist, &numdevs)) return; for (i = 0; i < numdevs; i++) { child = devlist[i]; if (device_get_state(child) == DS_NOTPRESENT) { #ifdef ACPI_ENABLE_POWERDOWN_NODRIVER acpi_set_powerstate(child, ACPI_STATE_D0); if (device_probe_and_attach(child) != 0) acpi_set_powerstate(child, ACPI_STATE_D3); #else device_probe_and_attach(child); #endif } } free(devlist, M_TEMP); } /* Location hint for devctl(8) */ static int acpi_child_location_str_method(device_t cbdev, device_t child, char *buf, size_t buflen) { struct acpi_device *dinfo = device_get_ivars(child); char buf2[32]; int pxm; if (dinfo->ad_handle) { snprintf(buf, buflen, "handle=%s", acpi_name(dinfo->ad_handle)); if (ACPI_SUCCESS(acpi_GetInteger(dinfo->ad_handle, "_PXM", &pxm))) { snprintf(buf2, 32, " _PXM=%d", pxm); strlcat(buf, buf2, buflen); } } else { snprintf(buf, buflen, "unknown"); } return (0); } /* PnP information for devctl(8) */ static int acpi_child_pnpinfo_str_method(device_t cbdev, device_t child, char *buf, size_t buflen) { struct acpi_device *dinfo = device_get_ivars(child); ACPI_DEVICE_INFO *adinfo; if (ACPI_FAILURE(AcpiGetObjectInfo(dinfo->ad_handle, &adinfo))) { snprintf(buf, buflen, "unknown"); return (0); } snprintf(buf, buflen, "_HID=%s _UID=%lu", (adinfo->Valid & ACPI_VALID_HID) ? adinfo->HardwareId.String : "none", (adinfo->Valid & ACPI_VALID_UID) ? strtoul(adinfo->UniqueId.String, NULL, 10) : 0UL); AcpiOsFree(adinfo); return (0); } /* * Handle per-device ivars */ static int acpi_read_ivar(device_t dev, device_t child, int index, uintptr_t *result) { struct acpi_device *ad; if ((ad = device_get_ivars(child)) == NULL) { device_printf(child, "device has no ivars\n"); return (ENOENT); } /* ACPI and ISA compatibility ivars */ switch(index) { case ACPI_IVAR_HANDLE: *(ACPI_HANDLE *)result = ad->ad_handle; break; case ACPI_IVAR_PRIVATE: *(void **)result = ad->ad_private; break; case ACPI_IVAR_FLAGS: *(int *)result = ad->ad_flags; break; case ISA_IVAR_VENDORID: case ISA_IVAR_SERIAL: case ISA_IVAR_COMPATID: *(int *)result = -1; break; case ISA_IVAR_LOGICALID: *(int *)result = acpi_isa_get_logicalid(child); break; case PCI_IVAR_CLASS: *(uint8_t*)result = (ad->ad_cls_class >> 16) & 0xff; break; case PCI_IVAR_SUBCLASS: *(uint8_t*)result = (ad->ad_cls_class >> 8) & 0xff; break; case PCI_IVAR_PROGIF: *(uint8_t*)result = (ad->ad_cls_class >> 0) & 0xff; break; default: return (ENOENT); } return (0); } static int acpi_write_ivar(device_t dev, device_t child, int index, uintptr_t value) { struct acpi_device *ad; if ((ad = device_get_ivars(child)) == NULL) { device_printf(child, "device has no ivars\n"); return (ENOENT); } switch(index) { case ACPI_IVAR_HANDLE: ad->ad_handle = (ACPI_HANDLE)value; break; case ACPI_IVAR_PRIVATE: ad->ad_private = (void *)value; break; case ACPI_IVAR_FLAGS: ad->ad_flags = (int)value; break; default: panic("bad ivar write request (%d)", index); return (ENOENT); } return (0); } /* * Handle child resource allocation/removal */ static struct resource_list * acpi_get_rlist(device_t dev, device_t child) { struct acpi_device *ad; ad = device_get_ivars(child); return (&ad->ad_rl); } static int acpi_match_resource_hint(device_t dev, int type, long value) { struct acpi_device *ad = device_get_ivars(dev); struct resource_list *rl = &ad->ad_rl; struct resource_list_entry *rle; STAILQ_FOREACH(rle, rl, link) { if (rle->type != type) continue; if (rle->start <= value && rle->end >= value) return (1); } return (0); } /* * Wire device unit numbers based on resource matches in hints. */ static void acpi_hint_device_unit(device_t acdev, device_t child, const char *name, int *unitp) { const char *s; long value; int line, matches, unit; /* * Iterate over all the hints for the devices with the specified * name to see if one's resources are a subset of this device. */ line = 0; while (resource_find_dev(&line, name, &unit, "at", NULL) == 0) { /* Must have an "at" for acpi or isa. */ resource_string_value(name, unit, "at", &s); if (!(strcmp(s, "acpi0") == 0 || strcmp(s, "acpi") == 0 || strcmp(s, "isa0") == 0 || strcmp(s, "isa") == 0)) continue; /* * Check for matching resources. We must have at least one match. * Since I/O and memory resources cannot be shared, if we get a * match on either of those, ignore any mismatches in IRQs or DRQs. * * XXX: We may want to revisit this to be more lenient and wire * as long as it gets one match. */ matches = 0; if (resource_long_value(name, unit, "port", &value) == 0) { /* * Floppy drive controllers are notorious for having a * wide variety of resources not all of which include the * first port that is specified by the hint (typically * 0x3f0) (see the comment above fdc_isa_alloc_resources() * in fdc_isa.c). However, they do all seem to include * port + 2 (e.g. 0x3f2) so for a floppy device, look for * 'value + 2' in the port resources instead of the hint * value. */ if (strcmp(name, "fdc") == 0) value += 2; if (acpi_match_resource_hint(child, SYS_RES_IOPORT, value)) matches++; else continue; } if (resource_long_value(name, unit, "maddr", &value) == 0) { if (acpi_match_resource_hint(child, SYS_RES_MEMORY, value)) matches++; else continue; } if (matches > 0) goto matched; if (resource_long_value(name, unit, "irq", &value) == 0) { if (acpi_match_resource_hint(child, SYS_RES_IRQ, value)) matches++; else continue; } if (resource_long_value(name, unit, "drq", &value) == 0) { if (acpi_match_resource_hint(child, SYS_RES_DRQ, value)) matches++; else continue; } matched: if (matches > 0) { /* We have a winner! */ *unitp = unit; break; } } } /* * Fetch the NUMA domain for a device by mapping the value returned by * _PXM to a NUMA domain. If the device does not have a _PXM method, * -2 is returned. If any other error occurs, -1 is returned. */ static int acpi_parse_pxm(device_t dev) { #ifdef NUMA #if defined(__i386__) || defined(__amd64__) ACPI_HANDLE handle; ACPI_STATUS status; int pxm; handle = acpi_get_handle(dev); if (handle == NULL) return (-2); status = acpi_GetInteger(handle, "_PXM", &pxm); if (ACPI_SUCCESS(status)) return (acpi_map_pxm_to_vm_domainid(pxm)); if (status == AE_NOT_FOUND) return (-2); #endif #endif return (-1); } int acpi_get_cpus(device_t dev, device_t child, enum cpu_sets op, size_t setsize, cpuset_t *cpuset) { int d, error; d = acpi_parse_pxm(child); if (d < 0) return (bus_generic_get_cpus(dev, child, op, setsize, cpuset)); switch (op) { case LOCAL_CPUS: if (setsize != sizeof(cpuset_t)) return (EINVAL); *cpuset = cpuset_domain[d]; return (0); case INTR_CPUS: error = bus_generic_get_cpus(dev, child, op, setsize, cpuset); if (error != 0) return (error); if (setsize != sizeof(cpuset_t)) return (EINVAL); CPU_AND(cpuset, &cpuset_domain[d]); return (0); default: return (bus_generic_get_cpus(dev, child, op, setsize, cpuset)); } } /* * Fetch the NUMA domain for the given device 'dev'. * * If a device has a _PXM method, map that to a NUMA domain. * Otherwise, pass the request up to the parent. * If there's no matching domain or the domain cannot be * determined, return ENOENT. */ int acpi_get_domain(device_t dev, device_t child, int *domain) { int d; d = acpi_parse_pxm(child); if (d >= 0) { *domain = d; return (0); } if (d == -1) return (ENOENT); /* No _PXM node; go up a level */ return (bus_generic_get_domain(dev, child, domain)); } /* * Pre-allocate/manage all memory and IO resources. Since rman can't handle * duplicates, we merge any in the sysresource attach routine. */ static int acpi_sysres_alloc(device_t dev) { struct resource *res; struct resource_list *rl; struct resource_list_entry *rle; struct rman *rm; device_t *children; int child_count, i; /* * Probe/attach any sysresource devices. This would be unnecessary if we * had multi-pass probe/attach. */ if (device_get_children(dev, &children, &child_count) != 0) return (ENXIO); for (i = 0; i < child_count; i++) { if (ACPI_ID_PROBE(dev, children[i], sysres_ids, NULL) <= 0) device_probe_and_attach(children[i]); } free(children, M_TEMP); rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev); STAILQ_FOREACH(rle, rl, link) { if (rle->res != NULL) { device_printf(dev, "duplicate resource for %jx\n", rle->start); continue; } /* Only memory and IO resources are valid here. */ switch (rle->type) { case SYS_RES_IOPORT: rm = &acpi_rman_io; break; case SYS_RES_MEMORY: rm = &acpi_rman_mem; break; default: continue; } /* Pre-allocate resource and add to our rman pool. */ res = BUS_ALLOC_RESOURCE(device_get_parent(dev), dev, rle->type, &rle->rid, rle->start, rle->start + rle->count - 1, rle->count, 0); if (res != NULL) { rman_manage_region(rm, rman_get_start(res), rman_get_end(res)); rle->res = res; } else if (bootverbose) device_printf(dev, "reservation of %jx, %jx (%d) failed\n", rle->start, rle->count, rle->type); } return (0); } /* * Reserve declared resources for devices found during attach once system * resources have been allocated. */ static void acpi_reserve_resources(device_t dev) { struct resource_list_entry *rle; struct resource_list *rl; struct acpi_device *ad; struct acpi_softc *sc; device_t *children; int child_count, i; sc = device_get_softc(dev); if (device_get_children(dev, &children, &child_count) != 0) return; for (i = 0; i < child_count; i++) { ad = device_get_ivars(children[i]); rl = &ad->ad_rl; /* Don't reserve system resources. */ if (ACPI_ID_PROBE(dev, children[i], sysres_ids, NULL) <= 0) continue; STAILQ_FOREACH(rle, rl, link) { /* * Don't reserve IRQ resources. There are many sticky things * to get right otherwise (e.g. IRQs for psm, atkbd, and HPET * when using legacy routing). */ if (rle->type == SYS_RES_IRQ) continue; /* * Don't reserve the resource if it is already allocated. * The acpi_ec(4) driver can allocate its resources early * if ECDT is present. */ if (rle->res != NULL) continue; /* * Try to reserve the resource from our parent. If this * fails because the resource is a system resource, just * let it be. The resource range is already reserved so * that other devices will not use it. If the driver * needs to allocate the resource, then * acpi_alloc_resource() will sub-alloc from the system * resource. */ resource_list_reserve(rl, dev, children[i], rle->type, &rle->rid, rle->start, rle->end, rle->count, 0); } } free(children, M_TEMP); sc->acpi_resources_reserved = 1; } static int acpi_set_resource(device_t dev, device_t child, int type, int rid, rman_res_t start, rman_res_t count) { struct acpi_softc *sc = device_get_softc(dev); struct acpi_device *ad = device_get_ivars(child); struct resource_list *rl = &ad->ad_rl; #if defined(__i386__) || defined(__amd64__) ACPI_DEVICE_INFO *devinfo; #endif rman_res_t end; /* Ignore IRQ resources for PCI link devices. */ if (type == SYS_RES_IRQ && ACPI_ID_PROBE(dev, child, pcilink_ids, NULL) <= 0) return (0); /* * Ignore most resources for PCI root bridges. Some BIOSes * incorrectly enumerate the memory ranges they decode as plain * memory resources instead of as ResourceProducer ranges. Other * BIOSes incorrectly list system resource entries for I/O ranges * under the PCI bridge. Do allow the one known-correct case on * x86 of a PCI bridge claiming the I/O ports used for PCI config * access. */ #if defined(__i386__) || defined(__amd64__) if (type == SYS_RES_MEMORY || type == SYS_RES_IOPORT) { if (ACPI_SUCCESS(AcpiGetObjectInfo(ad->ad_handle, &devinfo))) { if ((devinfo->Flags & ACPI_PCI_ROOT_BRIDGE) != 0) { if (!(type == SYS_RES_IOPORT && start == CONF1_ADDR_PORT)) { AcpiOsFree(devinfo); return (0); } } AcpiOsFree(devinfo); } } #endif +#ifdef INTRNG + /* map with default for now */ + if (type == SYS_RES_IRQ) + start = (rman_res_t)acpi_map_intr(child, (u_int)start, + acpi_get_handle(child)); +#endif + /* If the resource is already allocated, fail. */ if (resource_list_busy(rl, type, rid)) return (EBUSY); /* If the resource is already reserved, release it. */ if (resource_list_reserved(rl, type, rid)) resource_list_unreserve(rl, dev, child, type, rid); /* Add the resource. */ end = (start + count - 1); resource_list_add(rl, type, rid, start, end, count); /* Don't reserve resources until the system resources are allocated. */ if (!sc->acpi_resources_reserved) return (0); /* Don't reserve system resources. */ if (ACPI_ID_PROBE(dev, child, sysres_ids, NULL) <= 0) return (0); /* * Don't reserve IRQ resources. There are many sticky things to * get right otherwise (e.g. IRQs for psm, atkbd, and HPET when * using legacy routing). */ if (type == SYS_RES_IRQ) return (0); /* * Reserve the resource. * * XXX: Ignores failure for now. Failure here is probably a * BIOS/firmware bug? */ resource_list_reserve(rl, dev, child, type, &rid, start, end, count, 0); return (0); } static struct resource * acpi_alloc_resource(device_t bus, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { #ifndef INTRNG ACPI_RESOURCE ares; #endif struct acpi_device *ad; struct resource_list_entry *rle; struct resource_list *rl; struct resource *res; int isdefault = RMAN_IS_DEFAULT_RANGE(start, end); /* * First attempt at allocating the resource. For direct children, * use resource_list_alloc() to handle reserved resources. For * other devices, pass the request up to our parent. */ if (bus == device_get_parent(child)) { ad = device_get_ivars(child); rl = &ad->ad_rl; /* * Simulate the behavior of the ISA bus for direct children * devices. That is, if a non-default range is specified for * a resource that doesn't exist, use bus_set_resource() to * add the resource before allocating it. Note that these * resources will not be reserved. */ if (!isdefault && resource_list_find(rl, type, *rid) == NULL) resource_list_add(rl, type, *rid, start, end, count); res = resource_list_alloc(rl, bus, child, type, rid, start, end, count, flags); #ifndef INTRNG if (res != NULL && type == SYS_RES_IRQ) { /* * Since bus_config_intr() takes immediate effect, we cannot * configure the interrupt associated with a device when we * parse the resources but have to defer it until a driver * actually allocates the interrupt via bus_alloc_resource(). * * XXX: Should we handle the lookup failing? */ if (ACPI_SUCCESS(acpi_lookup_irq_resource(child, *rid, res, &ares))) acpi_config_intr(child, &ares); } #endif /* * If this is an allocation of the "default" range for a given * RID, fetch the exact bounds for this resource from the * resource list entry to try to allocate the range from the * system resource regions. */ if (res == NULL && isdefault) { rle = resource_list_find(rl, type, *rid); if (rle != NULL) { start = rle->start; end = rle->end; count = rle->count; } } } else res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type, rid, start, end, count, flags); /* * If the first attempt failed and this is an allocation of a * specific range, try to satisfy the request via a suballocation * from our system resource regions. */ if (res == NULL && start + count - 1 == end) res = acpi_alloc_sysres(child, type, rid, start, end, count, flags); return (res); } /* * Attempt to allocate a specific resource range from the system * resource ranges. Note that we only handle memory and I/O port * system resources. */ struct resource * acpi_alloc_sysres(device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct rman *rm; struct resource *res; switch (type) { case SYS_RES_IOPORT: rm = &acpi_rman_io; break; case SYS_RES_MEMORY: rm = &acpi_rman_mem; break; default: return (NULL); } KASSERT(start + count - 1 == end, ("wildcard resource range")); res = rman_reserve_resource(rm, start, end, count, flags & ~RF_ACTIVE, child); if (res == NULL) return (NULL); rman_set_rid(res, *rid); /* If requested, activate the resource using the parent's method. */ if (flags & RF_ACTIVE) if (bus_activate_resource(child, type, *rid, res) != 0) { rman_release_resource(res); return (NULL); } return (res); } static int acpi_is_resource_managed(int type, struct resource *r) { /* We only handle memory and IO resources through rman. */ switch (type) { case SYS_RES_IOPORT: return (rman_is_region_manager(r, &acpi_rman_io)); case SYS_RES_MEMORY: return (rman_is_region_manager(r, &acpi_rman_mem)); } return (0); } static int acpi_adjust_resource(device_t bus, device_t child, int type, struct resource *r, rman_res_t start, rman_res_t end) { if (acpi_is_resource_managed(type, r)) return (rman_adjust_resource(r, start, end)); return (bus_generic_adjust_resource(bus, child, type, r, start, end)); } static int acpi_release_resource(device_t bus, device_t child, int type, int rid, struct resource *r) { int ret; /* * If this resource belongs to one of our internal managers, * deactivate it and release it to the local pool. */ if (acpi_is_resource_managed(type, r)) { if (rman_get_flags(r) & RF_ACTIVE) { ret = bus_deactivate_resource(child, type, rid, r); if (ret != 0) return (ret); } return (rman_release_resource(r)); } return (bus_generic_rl_release_resource(bus, child, type, rid, r)); } static void acpi_delete_resource(device_t bus, device_t child, int type, int rid) { struct resource_list *rl; rl = acpi_get_rlist(bus, child); if (resource_list_busy(rl, type, rid)) { device_printf(bus, "delete_resource: Resource still owned by child" " (type=%d, rid=%d)\n", type, rid); return; } resource_list_unreserve(rl, bus, child, type, rid); resource_list_delete(rl, type, rid); } /* Allocate an IO port or memory resource, given its GAS. */ int acpi_bus_alloc_gas(device_t dev, int *type, int *rid, ACPI_GENERIC_ADDRESS *gas, struct resource **res, u_int flags) { int error, res_type; error = ENOMEM; if (type == NULL || rid == NULL || gas == NULL || res == NULL) return (EINVAL); /* We only support memory and IO spaces. */ switch (gas->SpaceId) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: res_type = SYS_RES_MEMORY; break; case ACPI_ADR_SPACE_SYSTEM_IO: res_type = SYS_RES_IOPORT; break; default: return (EOPNOTSUPP); } /* * If the register width is less than 8, assume the BIOS author means * it is a bit field and just allocate a byte. */ if (gas->BitWidth && gas->BitWidth < 8) gas->BitWidth = 8; /* Validate the address after we're sure we support the space. */ if (gas->Address == 0 || gas->BitWidth == 0) return (EINVAL); bus_set_resource(dev, res_type, *rid, gas->Address, gas->BitWidth / 8); *res = bus_alloc_resource_any(dev, res_type, rid, RF_ACTIVE | flags); if (*res != NULL) { *type = res_type; error = 0; } else bus_delete_resource(dev, res_type, *rid); return (error); } /* Probe _HID and _CID for compatible ISA PNP ids. */ static uint32_t acpi_isa_get_logicalid(device_t dev) { ACPI_DEVICE_INFO *devinfo; ACPI_HANDLE h; uint32_t pnpid; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); /* Fetch and validate the HID. */ if ((h = acpi_get_handle(dev)) == NULL || ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) return_VALUE (0); pnpid = (devinfo->Valid & ACPI_VALID_HID) != 0 && devinfo->HardwareId.Length >= ACPI_EISAID_STRING_SIZE ? PNP_EISAID(devinfo->HardwareId.String) : 0; AcpiOsFree(devinfo); return_VALUE (pnpid); } static int acpi_isa_get_compatid(device_t dev, uint32_t *cids, int count) { ACPI_DEVICE_INFO *devinfo; ACPI_PNP_DEVICE_ID *ids; ACPI_HANDLE h; uint32_t *pnpid; int i, valid; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); pnpid = cids; /* Fetch and validate the CID */ if ((h = acpi_get_handle(dev)) == NULL || ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) return_VALUE (0); if ((devinfo->Valid & ACPI_VALID_CID) == 0) { AcpiOsFree(devinfo); return_VALUE (0); } if (devinfo->CompatibleIdList.Count < count) count = devinfo->CompatibleIdList.Count; ids = devinfo->CompatibleIdList.Ids; for (i = 0, valid = 0; i < count; i++) if (ids[i].Length >= ACPI_EISAID_STRING_SIZE && strncmp(ids[i].String, "PNP", 3) == 0) { *pnpid++ = PNP_EISAID(ids[i].String); valid++; } AcpiOsFree(devinfo); return_VALUE (valid); } static int acpi_device_id_probe(device_t bus, device_t dev, char **ids, char **match) { ACPI_HANDLE h; ACPI_OBJECT_TYPE t; int rv; int i; h = acpi_get_handle(dev); if (ids == NULL || h == NULL) return (ENXIO); t = acpi_get_type(dev); if (t != ACPI_TYPE_DEVICE && t != ACPI_TYPE_PROCESSOR) return (ENXIO); /* Try to match one of the array of IDs with a HID or CID. */ for (i = 0; ids[i] != NULL; i++) { rv = acpi_MatchHid(h, ids[i]); if (rv == ACPI_MATCHHID_NOMATCH) continue; if (match != NULL) { *match = ids[i]; } return ((rv == ACPI_MATCHHID_HID)? BUS_PROBE_DEFAULT : BUS_PROBE_LOW_PRIORITY); } return (ENXIO); } static ACPI_STATUS acpi_device_eval_obj(device_t bus, device_t dev, ACPI_STRING pathname, ACPI_OBJECT_LIST *parameters, ACPI_BUFFER *ret) { ACPI_HANDLE h; if (dev == NULL) h = ACPI_ROOT_OBJECT; else if ((h = acpi_get_handle(dev)) == NULL) return (AE_BAD_PARAMETER); return (AcpiEvaluateObject(h, pathname, parameters, ret)); } int acpi_device_pwr_for_sleep(device_t bus, device_t dev, int *dstate) { struct acpi_softc *sc; ACPI_HANDLE handle; ACPI_STATUS status; char sxd[8]; handle = acpi_get_handle(dev); /* * XXX If we find these devices, don't try to power them down. * The serial and IRDA ports on my T23 hang the system when * set to D3 and it appears that such legacy devices may * need special handling in their drivers. */ if (dstate == NULL || handle == NULL || acpi_MatchHid(handle, "PNP0500") || acpi_MatchHid(handle, "PNP0501") || acpi_MatchHid(handle, "PNP0502") || acpi_MatchHid(handle, "PNP0510") || acpi_MatchHid(handle, "PNP0511")) return (ENXIO); /* * Override next state with the value from _SxD, if present. * Note illegal _S0D is evaluated because some systems expect this. */ sc = device_get_softc(bus); snprintf(sxd, sizeof(sxd), "_S%dD", sc->acpi_sstate); status = acpi_GetInteger(handle, sxd, dstate); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { device_printf(dev, "failed to get %s on %s: %s\n", sxd, acpi_name(handle), AcpiFormatException(status)); return (ENXIO); } return (0); } /* Callback arg for our implementation of walking the namespace. */ struct acpi_device_scan_ctx { acpi_scan_cb_t user_fn; void *arg; ACPI_HANDLE parent; }; static ACPI_STATUS acpi_device_scan_cb(ACPI_HANDLE h, UINT32 level, void *arg, void **retval) { struct acpi_device_scan_ctx *ctx; device_t dev, old_dev; ACPI_STATUS status; ACPI_OBJECT_TYPE type; /* * Skip this device if we think we'll have trouble with it or it is * the parent where the scan began. */ ctx = (struct acpi_device_scan_ctx *)arg; if (acpi_avoid(h) || h == ctx->parent) return (AE_OK); /* If this is not a valid device type (e.g., a method), skip it. */ if (ACPI_FAILURE(AcpiGetType(h, &type))) return (AE_OK); if (type != ACPI_TYPE_DEVICE && type != ACPI_TYPE_PROCESSOR && type != ACPI_TYPE_THERMAL && type != ACPI_TYPE_POWER) return (AE_OK); /* * Call the user function with the current device. If it is unchanged * afterwards, return. Otherwise, we update the handle to the new dev. */ old_dev = acpi_get_device(h); dev = old_dev; status = ctx->user_fn(h, &dev, level, ctx->arg); if (ACPI_FAILURE(status) || old_dev == dev) return (status); /* Remove the old child and its connection to the handle. */ if (old_dev != NULL) { device_delete_child(device_get_parent(old_dev), old_dev); AcpiDetachData(h, acpi_fake_objhandler); } /* Recreate the handle association if the user created a device. */ if (dev != NULL) AcpiAttachData(h, acpi_fake_objhandler, dev); return (AE_OK); } static ACPI_STATUS acpi_device_scan_children(device_t bus, device_t dev, int max_depth, acpi_scan_cb_t user_fn, void *arg) { ACPI_HANDLE h; struct acpi_device_scan_ctx ctx; if (acpi_disabled("children")) return (AE_OK); if (dev == NULL) h = ACPI_ROOT_OBJECT; else if ((h = acpi_get_handle(dev)) == NULL) return (AE_BAD_PARAMETER); ctx.user_fn = user_fn; ctx.arg = arg; ctx.parent = h; return (AcpiWalkNamespace(ACPI_TYPE_ANY, h, max_depth, acpi_device_scan_cb, NULL, &ctx, NULL)); } /* * Even though ACPI devices are not PCI, we use the PCI approach for setting * device power states since it's close enough to ACPI. */ static int acpi_set_powerstate(device_t child, int state) { ACPI_HANDLE h; ACPI_STATUS status; h = acpi_get_handle(child); if (state < ACPI_STATE_D0 || state > ACPI_D_STATES_MAX) return (EINVAL); if (h == NULL) return (0); /* Ignore errors if the power methods aren't present. */ status = acpi_pwr_switch_consumer(h, state); if (ACPI_SUCCESS(status)) { if (bootverbose) device_printf(child, "set ACPI power state D%d on %s\n", state, acpi_name(h)); } else if (status != AE_NOT_FOUND) device_printf(child, "failed to set ACPI power state D%d on %s: %s\n", state, acpi_name(h), AcpiFormatException(status)); return (0); } static int acpi_isa_pnp_probe(device_t bus, device_t child, struct isa_pnp_id *ids) { int result, cid_count, i; uint32_t lid, cids[8]; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); /* * ISA-style drivers attached to ACPI may persist and * probe manually if we return ENOENT. We never want * that to happen, so don't ever return it. */ result = ENXIO; /* Scan the supplied IDs for a match */ lid = acpi_isa_get_logicalid(child); cid_count = acpi_isa_get_compatid(child, cids, 8); while (ids && ids->ip_id) { if (lid == ids->ip_id) { result = 0; goto out; } for (i = 0; i < cid_count; i++) { if (cids[i] == ids->ip_id) { result = 0; goto out; } } ids++; } out: if (result == 0 && ids->ip_desc) device_set_desc(child, ids->ip_desc); return_VALUE (result); } #if defined(__i386__) || defined(__amd64__) /* * Look for a MCFG table. If it is present, use the settings for * domain (segment) 0 to setup PCI config space access via the memory * map. */ static void acpi_enable_pcie(void) { ACPI_TABLE_HEADER *hdr; ACPI_MCFG_ALLOCATION *alloc, *end; ACPI_STATUS status; status = AcpiGetTable(ACPI_SIG_MCFG, 1, &hdr); if (ACPI_FAILURE(status)) return; end = (ACPI_MCFG_ALLOCATION *)((char *)hdr + hdr->Length); alloc = (ACPI_MCFG_ALLOCATION *)((ACPI_TABLE_MCFG *)hdr + 1); while (alloc < end) { if (alloc->PciSegment == 0) { pcie_cfgregopen(alloc->Address, alloc->StartBusNumber, alloc->EndBusNumber); return; } alloc++; } } #elif defined(__aarch64__) static void acpi_enable_pcie(device_t child, int segment) { ACPI_TABLE_HEADER *hdr; ACPI_MCFG_ALLOCATION *alloc, *end; ACPI_STATUS status; status = AcpiGetTable(ACPI_SIG_MCFG, 1, &hdr); if (ACPI_FAILURE(status)) return; end = (ACPI_MCFG_ALLOCATION *)((char *)hdr + hdr->Length); alloc = (ACPI_MCFG_ALLOCATION *)((ACPI_TABLE_MCFG *)hdr + 1); while (alloc < end) { if (alloc->PciSegment == segment) { bus_set_resource(child, SYS_RES_MEMORY, 0, alloc->Address, 0x10000000); return; } alloc++; } } #endif /* * Scan all of the ACPI namespace and attach child devices. * * We should only expect to find devices in the \_PR, \_TZ, \_SI, and * \_SB scopes, and \_PR and \_TZ became obsolete in the ACPI 2.0 spec. * However, in violation of the spec, some systems place their PCI link * devices in \, so we have to walk the whole namespace. We check the * type of namespace nodes, so this should be ok. */ static void acpi_probe_children(device_t bus) { ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); /* * Scan the namespace and insert placeholders for all the devices that * we find. We also probe/attach any early devices. * * Note that we use AcpiWalkNamespace rather than AcpiGetDevices because * we want to create nodes for all devices, not just those that are * currently present. (This assumes that we don't want to create/remove * devices as they appear, which might be smarter.) */ ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "namespace scan\n")); AcpiWalkNamespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, 100, acpi_probe_child, NULL, bus, NULL); /* Pre-allocate resources for our rman from any sysresource devices. */ acpi_sysres_alloc(bus); /* Reserve resources already allocated to children. */ acpi_reserve_resources(bus); /* Create any static children by calling device identify methods. */ ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "device identify routines\n")); bus_generic_probe(bus); /* Probe/attach all children, created statically and from the namespace. */ ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "acpi bus_generic_attach\n")); bus_generic_attach(bus); /* Attach wake sysctls. */ acpi_wake_sysctl_walk(bus); ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "done attaching children\n")); return_VOID; } /* * Determine the probe order for a given device. */ static void acpi_probe_order(ACPI_HANDLE handle, int *order) { ACPI_OBJECT_TYPE type; /* * 0. CPUs * 1. I/O port and memory system resource holders * 2. Clocks and timers (to handle early accesses) * 3. Embedded controllers (to handle early accesses) * 4. PCI Link Devices */ AcpiGetType(handle, &type); if (type == ACPI_TYPE_PROCESSOR) *order = 0; else if (acpi_MatchHid(handle, "PNP0C01") || acpi_MatchHid(handle, "PNP0C02")) *order = 1; else if (acpi_MatchHid(handle, "PNP0100") || acpi_MatchHid(handle, "PNP0103") || acpi_MatchHid(handle, "PNP0B00")) *order = 2; else if (acpi_MatchHid(handle, "PNP0C09")) *order = 3; else if (acpi_MatchHid(handle, "PNP0C0F")) *order = 4; } /* * Evaluate a child device and determine whether we might attach a device to * it. */ static ACPI_STATUS acpi_probe_child(ACPI_HANDLE handle, UINT32 level, void *context, void **status) { ACPI_DEVICE_INFO *devinfo; struct acpi_device *ad; #ifdef __aarch64__ int segment; #endif struct acpi_prw_data prw; ACPI_OBJECT_TYPE type; ACPI_HANDLE h; device_t bus, child; char *handle_str; int order; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); if (acpi_disabled("children")) return_ACPI_STATUS (AE_OK); /* Skip this device if we think we'll have trouble with it. */ if (acpi_avoid(handle)) return_ACPI_STATUS (AE_OK); bus = (device_t)context; if (ACPI_SUCCESS(AcpiGetType(handle, &type))) { handle_str = acpi_name(handle); switch (type) { case ACPI_TYPE_DEVICE: /* * Since we scan from \, be sure to skip system scope objects. * \_SB_ and \_TZ_ are defined in ACPICA as devices to work around * BIOS bugs. For example, \_SB_ is to allow \_SB_._INI to be run * during the initialization and \_TZ_ is to support Notify() on it. */ if (strcmp(handle_str, "\\_SB_") == 0 || strcmp(handle_str, "\\_TZ_") == 0) break; if (acpi_parse_prw(handle, &prw) == 0) AcpiSetupGpeForWake(handle, prw.gpe_handle, prw.gpe_bit); /* * Ignore devices that do not have a _HID or _CID. They should * be discovered by other buses (e.g. the PCI bus driver). */ if (!acpi_has_hid(handle)) break; /* FALLTHROUGH */ case ACPI_TYPE_PROCESSOR: case ACPI_TYPE_THERMAL: case ACPI_TYPE_POWER: /* * Create a placeholder device for this node. Sort the * placeholder so that the probe/attach passes will run * breadth-first. Orders less than ACPI_DEV_BASE_ORDER * are reserved for special objects (i.e., system * resources). */ ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "scanning '%s'\n", handle_str)); order = level * 10 + ACPI_DEV_BASE_ORDER; acpi_probe_order(handle, &order); child = BUS_ADD_CHILD(bus, order, NULL, -1); if (child == NULL) break; /* Associate the handle with the device_t and vice versa. */ acpi_set_handle(child, handle); AcpiAttachData(handle, acpi_fake_objhandler, child); /* * Check that the device is present. If it's not present, * leave it disabled (so that we have a device_t attached to * the handle, but we don't probe it). * * XXX PCI link devices sometimes report "present" but not * "functional" (i.e. if disabled). Go ahead and probe them * anyway since we may enable them later. */ if (type == ACPI_TYPE_DEVICE && !acpi_DeviceIsPresent(child)) { /* Never disable PCI link devices. */ if (acpi_MatchHid(handle, "PNP0C0F")) break; /* * Docking stations should remain enabled since the system * may be undocked at boot. */ if (ACPI_SUCCESS(AcpiGetHandle(handle, "_DCK", &h))) break; device_disable(child); break; } /* * Get the device's resource settings and attach them. * Note that if the device has _PRS but no _CRS, we need * to decide when it's appropriate to try to configure the * device. Ignore the return value here; it's OK for the * device not to have any resources. */ acpi_parse_resources(child, handle, &acpi_res_parse_set, NULL); ad = device_get_ivars(child); ad->ad_cls_class = 0xffffff; if (ACPI_SUCCESS(AcpiGetObjectInfo(handle, &devinfo))) { if ((devinfo->Valid & ACPI_VALID_CLS) != 0 && devinfo->ClassCode.Length >= ACPI_PCICLS_STRING_SIZE) { ad->ad_cls_class = strtoul(devinfo->ClassCode.String, NULL, 16); } #ifdef __aarch64__ if ((devinfo->Flags & ACPI_PCI_ROOT_BRIDGE) != 0) { if (ACPI_SUCCESS(acpi_GetInteger(handle, "_SEG", &segment))) { acpi_enable_pcie(child, segment); } } #endif AcpiOsFree(devinfo); } break; } } return_ACPI_STATUS (AE_OK); } /* * AcpiAttachData() requires an object handler but never uses it. This is a * placeholder object handler so we can store a device_t in an ACPI_HANDLE. */ void acpi_fake_objhandler(ACPI_HANDLE h, void *data) { } static void acpi_shutdown_final(void *arg, int howto) { struct acpi_softc *sc = (struct acpi_softc *)arg; register_t intr; ACPI_STATUS status; /* * XXX Shutdown code should only run on the BSP (cpuid 0). * Some chipsets do not power off the system correctly if called from * an AP. */ if ((howto & RB_POWEROFF) != 0) { status = AcpiEnterSleepStatePrep(ACPI_STATE_S5); if (ACPI_FAILURE(status)) { device_printf(sc->acpi_dev, "AcpiEnterSleepStatePrep failed - %s\n", AcpiFormatException(status)); return; } device_printf(sc->acpi_dev, "Powering system off\n"); intr = intr_disable(); status = AcpiEnterSleepState(ACPI_STATE_S5); if (ACPI_FAILURE(status)) { intr_restore(intr); device_printf(sc->acpi_dev, "power-off failed - %s\n", AcpiFormatException(status)); } else { DELAY(1000000); intr_restore(intr); device_printf(sc->acpi_dev, "power-off failed - timeout\n"); } } else if ((howto & RB_HALT) == 0 && sc->acpi_handle_reboot) { /* Reboot using the reset register. */ status = AcpiReset(); if (ACPI_SUCCESS(status)) { DELAY(1000000); device_printf(sc->acpi_dev, "reset failed - timeout\n"); } else if (status != AE_NOT_EXIST) device_printf(sc->acpi_dev, "reset failed - %s\n", AcpiFormatException(status)); } else if (sc->acpi_do_disable && panicstr == NULL) { /* * Only disable ACPI if the user requested. On some systems, writing * the disable value to SMI_CMD hangs the system. */ device_printf(sc->acpi_dev, "Shutting down\n"); AcpiTerminate(); } } static void acpi_enable_fixed_events(struct acpi_softc *sc) { static int first_time = 1; /* Enable and clear fixed events and install handlers. */ if ((AcpiGbl_FADT.Flags & ACPI_FADT_POWER_BUTTON) == 0) { AcpiClearEvent(ACPI_EVENT_POWER_BUTTON); AcpiInstallFixedEventHandler(ACPI_EVENT_POWER_BUTTON, acpi_event_power_button_sleep, sc); if (first_time) device_printf(sc->acpi_dev, "Power Button (fixed)\n"); } if ((AcpiGbl_FADT.Flags & ACPI_FADT_SLEEP_BUTTON) == 0) { AcpiClearEvent(ACPI_EVENT_SLEEP_BUTTON); AcpiInstallFixedEventHandler(ACPI_EVENT_SLEEP_BUTTON, acpi_event_sleep_button_sleep, sc); if (first_time) device_printf(sc->acpi_dev, "Sleep Button (fixed)\n"); } first_time = 0; } /* * Returns true if the device is actually present and should * be attached to. This requires the present, enabled, UI-visible * and diagnostics-passed bits to be set. */ BOOLEAN acpi_DeviceIsPresent(device_t dev) { ACPI_HANDLE h; UINT32 s; ACPI_STATUS status; h = acpi_get_handle(dev); if (h == NULL) return (FALSE); status = acpi_GetInteger(h, "_STA", &s); /* * Certain Treadripper boards always returns 0 for FreeBSD because it * only returns non-zero for the OS string "Windows 2015". Otherwise it * will return zero. Force them to always be treated as present. * Beata versions were worse: they always returned 0. */ if (acpi_MatchHid(h, "AMDI0020") || acpi_MatchHid(h, "AMDI0010")) return (TRUE); /* If no _STA method, must be present */ if (ACPI_FAILURE(status)) return (status == AE_NOT_FOUND ? TRUE : FALSE); return (ACPI_DEVICE_PRESENT(s) ? TRUE : FALSE); } /* * Returns true if the battery is actually present and inserted. */ BOOLEAN acpi_BatteryIsPresent(device_t dev) { ACPI_HANDLE h; UINT32 s; ACPI_STATUS status; h = acpi_get_handle(dev); if (h == NULL) return (FALSE); status = acpi_GetInteger(h, "_STA", &s); /* If no _STA method, must be present */ if (ACPI_FAILURE(status)) return (status == AE_NOT_FOUND ? TRUE : FALSE); return (ACPI_BATTERY_PRESENT(s) ? TRUE : FALSE); } /* * Returns true if a device has at least one valid device ID. */ static BOOLEAN acpi_has_hid(ACPI_HANDLE h) { ACPI_DEVICE_INFO *devinfo; BOOLEAN ret; if (h == NULL || ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) return (FALSE); ret = FALSE; if ((devinfo->Valid & ACPI_VALID_HID) != 0) ret = TRUE; else if ((devinfo->Valid & ACPI_VALID_CID) != 0) if (devinfo->CompatibleIdList.Count > 0) ret = TRUE; AcpiOsFree(devinfo); return (ret); } /* * Match a HID string against a handle * returns ACPI_MATCHHID_HID if _HID match * ACPI_MATCHHID_CID if _CID match and not _HID match. * ACPI_MATCHHID_NOMATCH=0 if no match. */ int acpi_MatchHid(ACPI_HANDLE h, const char *hid) { ACPI_DEVICE_INFO *devinfo; BOOLEAN ret; int i; if (hid == NULL || h == NULL || ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) return (ACPI_MATCHHID_NOMATCH); ret = FALSE; if ((devinfo->Valid & ACPI_VALID_HID) != 0 && strcmp(hid, devinfo->HardwareId.String) == 0) ret = ACPI_MATCHHID_HID; else if ((devinfo->Valid & ACPI_VALID_CID) != 0) for (i = 0; i < devinfo->CompatibleIdList.Count; i++) { if (strcmp(hid, devinfo->CompatibleIdList.Ids[i].String) == 0) { ret = ACPI_MATCHHID_CID; break; } } AcpiOsFree(devinfo); return (ret); } /* * Return the handle of a named object within our scope, ie. that of (parent) * or one if its parents. */ ACPI_STATUS acpi_GetHandleInScope(ACPI_HANDLE parent, char *path, ACPI_HANDLE *result) { ACPI_HANDLE r; ACPI_STATUS status; /* Walk back up the tree to the root */ for (;;) { status = AcpiGetHandle(parent, path, &r); if (ACPI_SUCCESS(status)) { *result = r; return (AE_OK); } /* XXX Return error here? */ if (status != AE_NOT_FOUND) return (AE_OK); if (ACPI_FAILURE(AcpiGetParent(parent, &r))) return (AE_NOT_FOUND); parent = r; } } /* * Allocate a buffer with a preset data size. */ ACPI_BUFFER * acpi_AllocBuffer(int size) { ACPI_BUFFER *buf; if ((buf = malloc(size + sizeof(*buf), M_ACPIDEV, M_NOWAIT)) == NULL) return (NULL); buf->Length = size; buf->Pointer = (void *)(buf + 1); return (buf); } ACPI_STATUS acpi_SetInteger(ACPI_HANDLE handle, char *path, UINT32 number) { ACPI_OBJECT arg1; ACPI_OBJECT_LIST args; arg1.Type = ACPI_TYPE_INTEGER; arg1.Integer.Value = number; args.Count = 1; args.Pointer = &arg1; return (AcpiEvaluateObject(handle, path, &args, NULL)); } /* * Evaluate a path that should return an integer. */ ACPI_STATUS acpi_GetInteger(ACPI_HANDLE handle, char *path, UINT32 *number) { ACPI_STATUS status; ACPI_BUFFER buf; ACPI_OBJECT param; if (handle == NULL) handle = ACPI_ROOT_OBJECT; /* * Assume that what we've been pointed at is an Integer object, or * a method that will return an Integer. */ buf.Pointer = ¶m; buf.Length = sizeof(param); status = AcpiEvaluateObject(handle, path, NULL, &buf); if (ACPI_SUCCESS(status)) { if (param.Type == ACPI_TYPE_INTEGER) *number = param.Integer.Value; else status = AE_TYPE; } /* * In some applications, a method that's expected to return an Integer * may instead return a Buffer (probably to simplify some internal * arithmetic). We'll try to fetch whatever it is, and if it's a Buffer, * convert it into an Integer as best we can. * * This is a hack. */ if (status == AE_BUFFER_OVERFLOW) { if ((buf.Pointer = AcpiOsAllocate(buf.Length)) == NULL) { status = AE_NO_MEMORY; } else { status = AcpiEvaluateObject(handle, path, NULL, &buf); if (ACPI_SUCCESS(status)) status = acpi_ConvertBufferToInteger(&buf, number); AcpiOsFree(buf.Pointer); } } return (status); } ACPI_STATUS acpi_ConvertBufferToInteger(ACPI_BUFFER *bufp, UINT32 *number) { ACPI_OBJECT *p; UINT8 *val; int i; p = (ACPI_OBJECT *)bufp->Pointer; if (p->Type == ACPI_TYPE_INTEGER) { *number = p->Integer.Value; return (AE_OK); } if (p->Type != ACPI_TYPE_BUFFER) return (AE_TYPE); if (p->Buffer.Length > sizeof(int)) return (AE_BAD_DATA); *number = 0; val = p->Buffer.Pointer; for (i = 0; i < p->Buffer.Length; i++) *number += val[i] << (i * 8); return (AE_OK); } /* * Iterate over the elements of an a package object, calling the supplied * function for each element. * * XXX possible enhancement might be to abort traversal on error. */ ACPI_STATUS acpi_ForeachPackageObject(ACPI_OBJECT *pkg, void (*func)(ACPI_OBJECT *comp, void *arg), void *arg) { ACPI_OBJECT *comp; int i; if (pkg == NULL || pkg->Type != ACPI_TYPE_PACKAGE) return (AE_BAD_PARAMETER); /* Iterate over components */ i = 0; comp = pkg->Package.Elements; for (; i < pkg->Package.Count; i++, comp++) func(comp, arg); return (AE_OK); } /* * Find the (index)th resource object in a set. */ ACPI_STATUS acpi_FindIndexedResource(ACPI_BUFFER *buf, int index, ACPI_RESOURCE **resp) { ACPI_RESOURCE *rp; int i; rp = (ACPI_RESOURCE *)buf->Pointer; i = index; while (i-- > 0) { /* Range check */ if (rp > (ACPI_RESOURCE *)((u_int8_t *)buf->Pointer + buf->Length)) return (AE_BAD_PARAMETER); /* Check for terminator */ if (rp->Type == ACPI_RESOURCE_TYPE_END_TAG || rp->Length == 0) return (AE_NOT_FOUND); rp = ACPI_NEXT_RESOURCE(rp); } if (resp != NULL) *resp = rp; return (AE_OK); } /* * Append an ACPI_RESOURCE to an ACPI_BUFFER. * * Given a pointer to an ACPI_RESOURCE structure, expand the ACPI_BUFFER * provided to contain it. If the ACPI_BUFFER is empty, allocate a sensible * backing block. If the ACPI_RESOURCE is NULL, return an empty set of * resources. */ #define ACPI_INITIAL_RESOURCE_BUFFER_SIZE 512 ACPI_STATUS acpi_AppendBufferResource(ACPI_BUFFER *buf, ACPI_RESOURCE *res) { ACPI_RESOURCE *rp; void *newp; /* Initialise the buffer if necessary. */ if (buf->Pointer == NULL) { buf->Length = ACPI_INITIAL_RESOURCE_BUFFER_SIZE; if ((buf->Pointer = AcpiOsAllocate(buf->Length)) == NULL) return (AE_NO_MEMORY); rp = (ACPI_RESOURCE *)buf->Pointer; rp->Type = ACPI_RESOURCE_TYPE_END_TAG; rp->Length = ACPI_RS_SIZE_MIN; } if (res == NULL) return (AE_OK); /* * Scan the current buffer looking for the terminator. * This will either find the terminator or hit the end * of the buffer and return an error. */ rp = (ACPI_RESOURCE *)buf->Pointer; for (;;) { /* Range check, don't go outside the buffer */ if (rp >= (ACPI_RESOURCE *)((u_int8_t *)buf->Pointer + buf->Length)) return (AE_BAD_PARAMETER); if (rp->Type == ACPI_RESOURCE_TYPE_END_TAG || rp->Length == 0) break; rp = ACPI_NEXT_RESOURCE(rp); } /* * Check the size of the buffer and expand if required. * * Required size is: * size of existing resources before terminator + * size of new resource and header + * size of terminator. * * Note that this loop should really only run once, unless * for some reason we are stuffing a *really* huge resource. */ while ((((u_int8_t *)rp - (u_int8_t *)buf->Pointer) + res->Length + ACPI_RS_SIZE_NO_DATA + ACPI_RS_SIZE_MIN) >= buf->Length) { if ((newp = AcpiOsAllocate(buf->Length * 2)) == NULL) return (AE_NO_MEMORY); bcopy(buf->Pointer, newp, buf->Length); rp = (ACPI_RESOURCE *)((u_int8_t *)newp + ((u_int8_t *)rp - (u_int8_t *)buf->Pointer)); AcpiOsFree(buf->Pointer); buf->Pointer = newp; buf->Length += buf->Length; } /* Insert the new resource. */ bcopy(res, rp, res->Length + ACPI_RS_SIZE_NO_DATA); /* And add the terminator. */ rp = ACPI_NEXT_RESOURCE(rp); rp->Type = ACPI_RESOURCE_TYPE_END_TAG; rp->Length = ACPI_RS_SIZE_MIN; return (AE_OK); } UINT8 acpi_DSMQuery(ACPI_HANDLE h, uint8_t *uuid, int revision) { /* * ACPI spec 9.1.1 defines this. * * "Arg2: Function Index Represents a specific function whose meaning is * specific to the UUID and Revision ID. Function indices should start * with 1. Function number zero is a query function (see the special * return code defined below)." */ ACPI_BUFFER buf; ACPI_OBJECT *obj; UINT8 ret = 0; if (!ACPI_SUCCESS(acpi_EvaluateDSM(h, uuid, revision, 0, NULL, &buf))) { ACPI_INFO(("Failed to enumerate DSM functions\n")); return (0); } obj = (ACPI_OBJECT *)buf.Pointer; KASSERT(obj, ("Object not allowed to be NULL\n")); /* * From ACPI 6.2 spec 9.1.1: * If Function Index = 0, a Buffer containing a function index bitfield. * Otherwise, the return value and type depends on the UUID and revision * ID (see below). */ switch (obj->Type) { case ACPI_TYPE_BUFFER: ret = *(uint8_t *)obj->Buffer.Pointer; break; case ACPI_TYPE_INTEGER: ACPI_BIOS_WARNING((AE_INFO, "Possibly buggy BIOS with ACPI_TYPE_INTEGER for function enumeration\n")); ret = obj->Integer.Value & 0xFF; break; default: ACPI_WARNING((AE_INFO, "Unexpected return type %u\n", obj->Type)); }; AcpiOsFree(obj); return ret; } /* * DSM may return multiple types depending on the function. It is therefore * unsafe to use the typed evaluation. It is highly recommended that the caller * check the type of the returned object. */ ACPI_STATUS acpi_EvaluateDSM(ACPI_HANDLE handle, uint8_t *uuid, int revision, uint64_t function, union acpi_object *package, ACPI_BUFFER *out_buf) { ACPI_OBJECT arg[4]; ACPI_OBJECT_LIST arglist; ACPI_BUFFER buf; ACPI_STATUS status; if (out_buf == NULL) return (AE_NO_MEMORY); arg[0].Type = ACPI_TYPE_BUFFER; arg[0].Buffer.Length = ACPI_UUID_LENGTH; arg[0].Buffer.Pointer = uuid; arg[1].Type = ACPI_TYPE_INTEGER; arg[1].Integer.Value = revision; arg[2].Type = ACPI_TYPE_INTEGER; arg[2].Integer.Value = function; if (package) { arg[3] = *package; } else { arg[3].Type = ACPI_TYPE_PACKAGE; arg[3].Package.Count = 0; arg[3].Package.Elements = NULL; } arglist.Pointer = arg; arglist.Count = 4; buf.Pointer = NULL; buf.Length = ACPI_ALLOCATE_BUFFER; status = AcpiEvaluateObject(handle, "_DSM", &arglist, &buf); if (ACPI_FAILURE(status)) return (status); KASSERT(ACPI_SUCCESS(status), ("Unexpected status")); *out_buf = buf; return (status); } ACPI_STATUS acpi_EvaluateOSC(ACPI_HANDLE handle, uint8_t *uuid, int revision, int count, uint32_t *caps_in, uint32_t *caps_out, bool query) { ACPI_OBJECT arg[4], *ret; ACPI_OBJECT_LIST arglist; ACPI_BUFFER buf; ACPI_STATUS status; arglist.Pointer = arg; arglist.Count = 4; arg[0].Type = ACPI_TYPE_BUFFER; arg[0].Buffer.Length = ACPI_UUID_LENGTH; arg[0].Buffer.Pointer = uuid; arg[1].Type = ACPI_TYPE_INTEGER; arg[1].Integer.Value = revision; arg[2].Type = ACPI_TYPE_INTEGER; arg[2].Integer.Value = count; arg[3].Type = ACPI_TYPE_BUFFER; arg[3].Buffer.Length = count * sizeof(*caps_in); arg[3].Buffer.Pointer = (uint8_t *)caps_in; caps_in[0] = query ? 1 : 0; buf.Pointer = NULL; buf.Length = ACPI_ALLOCATE_BUFFER; status = AcpiEvaluateObjectTyped(handle, "_OSC", &arglist, &buf, ACPI_TYPE_BUFFER); if (ACPI_FAILURE(status)) return (status); if (caps_out != NULL) { ret = buf.Pointer; if (ret->Buffer.Length != count * sizeof(*caps_out)) { AcpiOsFree(buf.Pointer); return (AE_BUFFER_OVERFLOW); } bcopy(ret->Buffer.Pointer, caps_out, ret->Buffer.Length); } AcpiOsFree(buf.Pointer); return (status); } /* * Set interrupt model. */ ACPI_STATUS acpi_SetIntrModel(int model) { return (acpi_SetInteger(ACPI_ROOT_OBJECT, "_PIC", model)); } /* * Walk subtables of a table and call a callback routine for each * subtable. The caller should provide the first subtable and a * pointer to the end of the table. This can be used to walk tables * such as MADT and SRAT that use subtable entries. */ void acpi_walk_subtables(void *first, void *end, acpi_subtable_handler *handler, void *arg) { ACPI_SUBTABLE_HEADER *entry; for (entry = first; (void *)entry < end; ) { /* Avoid an infinite loop if we hit a bogus entry. */ if (entry->Length < sizeof(ACPI_SUBTABLE_HEADER)) return; handler(entry, arg); entry = ACPI_ADD_PTR(ACPI_SUBTABLE_HEADER, entry, entry->Length); } } /* * DEPRECATED. This interface has serious deficiencies and will be * removed. * * Immediately enter the sleep state. In the old model, acpiconf(8) ran * rc.suspend and rc.resume so we don't have to notify devd(8) to do this. */ ACPI_STATUS acpi_SetSleepState(struct acpi_softc *sc, int state) { static int once; if (!once) { device_printf(sc->acpi_dev, "warning: acpi_SetSleepState() deprecated, need to update your software\n"); once = 1; } return (acpi_EnterSleepState(sc, state)); } #if defined(__amd64__) || defined(__i386__) static void acpi_sleep_force_task(void *context) { struct acpi_softc *sc = (struct acpi_softc *)context; if (ACPI_FAILURE(acpi_EnterSleepState(sc, sc->acpi_next_sstate))) device_printf(sc->acpi_dev, "force sleep state S%d failed\n", sc->acpi_next_sstate); } static void acpi_sleep_force(void *arg) { struct acpi_softc *sc = (struct acpi_softc *)arg; device_printf(sc->acpi_dev, "suspend request timed out, forcing sleep now\n"); /* * XXX Suspending from callout causes freezes in DEVICE_SUSPEND(). * Suspend from acpi_task thread instead. */ if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_sleep_force_task, sc))) device_printf(sc->acpi_dev, "AcpiOsExecute() for sleeping failed\n"); } #endif /* * Request that the system enter the given suspend state. All /dev/apm * devices and devd(8) will be notified. Userland then has a chance to * save state and acknowledge the request. The system sleeps once all * acks are in. */ int acpi_ReqSleepState(struct acpi_softc *sc, int state) { #if defined(__amd64__) || defined(__i386__) struct apm_clone_data *clone; ACPI_STATUS status; if (state < ACPI_STATE_S1 || state > ACPI_S_STATES_MAX) return (EINVAL); if (!acpi_sleep_states[state]) return (EOPNOTSUPP); /* * If a reboot/shutdown/suspend request is already in progress or * suspend is blocked due to an upcoming shutdown, just return. */ if (rebooting || sc->acpi_next_sstate != 0 || suspend_blocked) { return (0); } /* Wait until sleep is enabled. */ while (sc->acpi_sleep_disabled) { AcpiOsSleep(1000); } ACPI_LOCK(acpi); sc->acpi_next_sstate = state; /* S5 (soft-off) should be entered directly with no waiting. */ if (state == ACPI_STATE_S5) { ACPI_UNLOCK(acpi); status = acpi_EnterSleepState(sc, state); return (ACPI_SUCCESS(status) ? 0 : ENXIO); } /* Record the pending state and notify all apm devices. */ STAILQ_FOREACH(clone, &sc->apm_cdevs, entries) { clone->notify_status = APM_EV_NONE; if ((clone->flags & ACPI_EVF_DEVD) == 0) { selwakeuppri(&clone->sel_read, PZERO); KNOTE_LOCKED(&clone->sel_read.si_note, 0); } } /* If devd(8) is not running, immediately enter the sleep state. */ if (!devctl_process_running()) { ACPI_UNLOCK(acpi); status = acpi_EnterSleepState(sc, state); return (ACPI_SUCCESS(status) ? 0 : ENXIO); } /* * Set a timeout to fire if userland doesn't ack the suspend request * in time. This way we still eventually go to sleep if we were * overheating or running low on battery, even if userland is hung. * We cancel this timeout once all userland acks are in or the * suspend request is aborted. */ callout_reset(&sc->susp_force_to, 10 * hz, acpi_sleep_force, sc); ACPI_UNLOCK(acpi); /* Now notify devd(8) also. */ acpi_UserNotify("Suspend", ACPI_ROOT_OBJECT, state); return (0); #else /* This platform does not support acpi suspend/resume. */ return (EOPNOTSUPP); #endif } /* * Acknowledge (or reject) a pending sleep state. The caller has * prepared for suspend and is now ready for it to proceed. If the * error argument is non-zero, it indicates suspend should be cancelled * and gives an errno value describing why. Once all votes are in, * we suspend the system. */ int acpi_AckSleepState(struct apm_clone_data *clone, int error) { #if defined(__amd64__) || defined(__i386__) struct acpi_softc *sc; int ret, sleeping; /* If no pending sleep state, return an error. */ ACPI_LOCK(acpi); sc = clone->acpi_sc; if (sc->acpi_next_sstate == 0) { ACPI_UNLOCK(acpi); return (ENXIO); } /* Caller wants to abort suspend process. */ if (error) { sc->acpi_next_sstate = 0; callout_stop(&sc->susp_force_to); device_printf(sc->acpi_dev, "listener on %s cancelled the pending suspend\n", devtoname(clone->cdev)); ACPI_UNLOCK(acpi); return (0); } /* * Mark this device as acking the suspend request. Then, walk through * all devices, seeing if they agree yet. We only count devices that * are writable since read-only devices couldn't ack the request. */ sleeping = TRUE; clone->notify_status = APM_EV_ACKED; STAILQ_FOREACH(clone, &sc->apm_cdevs, entries) { if ((clone->flags & ACPI_EVF_WRITE) != 0 && clone->notify_status != APM_EV_ACKED) { sleeping = FALSE; break; } } /* If all devices have voted "yes", we will suspend now. */ if (sleeping) callout_stop(&sc->susp_force_to); ACPI_UNLOCK(acpi); ret = 0; if (sleeping) { if (ACPI_FAILURE(acpi_EnterSleepState(sc, sc->acpi_next_sstate))) ret = ENODEV; } return (ret); #else /* This platform does not support acpi suspend/resume. */ return (EOPNOTSUPP); #endif } static void acpi_sleep_enable(void *arg) { struct acpi_softc *sc = (struct acpi_softc *)arg; ACPI_LOCK_ASSERT(acpi); /* Reschedule if the system is not fully up and running. */ if (!AcpiGbl_SystemAwakeAndRunning) { callout_schedule(&acpi_sleep_timer, hz * ACPI_MINIMUM_AWAKETIME); return; } sc->acpi_sleep_disabled = FALSE; } static ACPI_STATUS acpi_sleep_disable(struct acpi_softc *sc) { ACPI_STATUS status; /* Fail if the system is not fully up and running. */ if (!AcpiGbl_SystemAwakeAndRunning) return (AE_ERROR); ACPI_LOCK(acpi); status = sc->acpi_sleep_disabled ? AE_ERROR : AE_OK; sc->acpi_sleep_disabled = TRUE; ACPI_UNLOCK(acpi); return (status); } enum acpi_sleep_state { ACPI_SS_NONE, ACPI_SS_GPE_SET, ACPI_SS_DEV_SUSPEND, ACPI_SS_SLP_PREP, ACPI_SS_SLEPT, }; /* * Enter the desired system sleep state. * * Currently we support S1-S5 but S4 is only S4BIOS */ static ACPI_STATUS acpi_EnterSleepState(struct acpi_softc *sc, int state) { register_t intr; ACPI_STATUS status; ACPI_EVENT_STATUS power_button_status; enum acpi_sleep_state slp_state; int sleep_result; ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); if (state < ACPI_STATE_S1 || state > ACPI_S_STATES_MAX) return_ACPI_STATUS (AE_BAD_PARAMETER); if (!acpi_sleep_states[state]) { device_printf(sc->acpi_dev, "Sleep state S%d not supported by BIOS\n", state); return (AE_SUPPORT); } /* Re-entry once we're suspending is not allowed. */ status = acpi_sleep_disable(sc); if (ACPI_FAILURE(status)) { device_printf(sc->acpi_dev, "suspend request ignored (not ready yet)\n"); return (status); } if (state == ACPI_STATE_S5) { /* * Shut down cleanly and power off. This will call us back through the * shutdown handlers. */ shutdown_nice(RB_POWEROFF); return_ACPI_STATUS (AE_OK); } EVENTHANDLER_INVOKE(power_suspend_early); stop_all_proc(); EVENTHANDLER_INVOKE(power_suspend); #ifdef EARLY_AP_STARTUP MPASS(mp_ncpus == 1 || smp_started); thread_lock(curthread); sched_bind(curthread, 0); thread_unlock(curthread); #else if (smp_started) { thread_lock(curthread); sched_bind(curthread, 0); thread_unlock(curthread); } #endif /* * Be sure to hold Giant across DEVICE_SUSPEND/RESUME since non-MPSAFE * drivers need this. */ mtx_lock(&Giant); slp_state = ACPI_SS_NONE; sc->acpi_sstate = state; /* Enable any GPEs as appropriate and requested by the user. */ acpi_wake_prep_walk(state); slp_state = ACPI_SS_GPE_SET; /* * Inform all devices that we are going to sleep. If at least one * device fails, DEVICE_SUSPEND() automatically resumes the tree. * * XXX Note that a better two-pass approach with a 'veto' pass * followed by a "real thing" pass would be better, but the current * bus interface does not provide for this. */ if (DEVICE_SUSPEND(root_bus) != 0) { device_printf(sc->acpi_dev, "device_suspend failed\n"); goto backout; } slp_state = ACPI_SS_DEV_SUSPEND; status = AcpiEnterSleepStatePrep(state); if (ACPI_FAILURE(status)) { device_printf(sc->acpi_dev, "AcpiEnterSleepStatePrep failed - %s\n", AcpiFormatException(status)); goto backout; } slp_state = ACPI_SS_SLP_PREP; if (sc->acpi_sleep_delay > 0) DELAY(sc->acpi_sleep_delay * 1000000); suspendclock(); intr = intr_disable(); if (state != ACPI_STATE_S1) { sleep_result = acpi_sleep_machdep(sc, state); acpi_wakeup_machdep(sc, state, sleep_result, 0); /* * XXX According to ACPI specification SCI_EN bit should be restored * by ACPI platform (BIOS, firmware) to its pre-sleep state. * Unfortunately some BIOSes fail to do that and that leads to * unexpected and serious consequences during wake up like a system * getting stuck in SMI handlers. * This hack is picked up from Linux, which claims that it follows * Windows behavior. */ if (sleep_result == 1 && state != ACPI_STATE_S4) AcpiWriteBitRegister(ACPI_BITREG_SCI_ENABLE, ACPI_ENABLE_EVENT); if (sleep_result == 1 && state == ACPI_STATE_S3) { /* * Prevent mis-interpretation of the wakeup by power button * as a request for power off. * Ideally we should post an appropriate wakeup event, * perhaps using acpi_event_power_button_wake or alike. * * Clearing of power button status after wakeup is mandated * by ACPI specification in section "Fixed Power Button". * * XXX As of ACPICA 20121114 AcpiGetEventStatus provides * status as 0/1 corressponding to inactive/active despite * its type being ACPI_EVENT_STATUS. In other words, * we should not test for ACPI_EVENT_FLAG_SET for time being. */ if (ACPI_SUCCESS(AcpiGetEventStatus(ACPI_EVENT_POWER_BUTTON, &power_button_status)) && power_button_status != 0) { AcpiClearEvent(ACPI_EVENT_POWER_BUTTON); device_printf(sc->acpi_dev, "cleared fixed power button status\n"); } } intr_restore(intr); /* call acpi_wakeup_machdep() again with interrupt enabled */ acpi_wakeup_machdep(sc, state, sleep_result, 1); AcpiLeaveSleepStatePrep(state); if (sleep_result == -1) goto backout; /* Re-enable ACPI hardware on wakeup from sleep state 4. */ if (state == ACPI_STATE_S4) AcpiEnable(); } else { status = AcpiEnterSleepState(state); intr_restore(intr); AcpiLeaveSleepStatePrep(state); if (ACPI_FAILURE(status)) { device_printf(sc->acpi_dev, "AcpiEnterSleepState failed - %s\n", AcpiFormatException(status)); goto backout; } } slp_state = ACPI_SS_SLEPT; /* * Back out state according to how far along we got in the suspend * process. This handles both the error and success cases. */ backout: if (slp_state >= ACPI_SS_SLP_PREP) resumeclock(); if (slp_state >= ACPI_SS_GPE_SET) { acpi_wake_prep_walk(state); sc->acpi_sstate = ACPI_STATE_S0; } if (slp_state >= ACPI_SS_DEV_SUSPEND) DEVICE_RESUME(root_bus); if (slp_state >= ACPI_SS_SLP_PREP) AcpiLeaveSleepState(state); if (slp_state >= ACPI_SS_SLEPT) { #if defined(__i386__) || defined(__amd64__) /* NB: we are still using ACPI timecounter at this point. */ resume_TSC(); #endif acpi_resync_clock(sc); acpi_enable_fixed_events(sc); } sc->acpi_next_sstate = 0; mtx_unlock(&Giant); #ifdef EARLY_AP_STARTUP thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); #else if (smp_started) { thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); } #endif resume_all_proc(); EVENTHANDLER_INVOKE(power_resume); /* Allow another sleep request after a while. */ callout_schedule(&acpi_sleep_timer, hz * ACPI_MINIMUM_AWAKETIME); /* Run /etc/rc.resume after we are back. */ if (devctl_process_running()) acpi_UserNotify("Resume", ACPI_ROOT_OBJECT, state); return_ACPI_STATUS (status); } static void acpi_resync_clock(struct acpi_softc *sc) { /* * Warm up timecounter again and reset system clock. */ (void)timecounter->tc_get_timecount(timecounter); (void)timecounter->tc_get_timecount(timecounter); inittodr(time_second + sc->acpi_sleep_delay); } /* Enable or disable the device's wake GPE. */ int acpi_wake_set_enable(device_t dev, int enable) { struct acpi_prw_data prw; ACPI_STATUS status; int flags; /* Make sure the device supports waking the system and get the GPE. */ if (acpi_parse_prw(acpi_get_handle(dev), &prw) != 0) return (ENXIO); flags = acpi_get_flags(dev); if (enable) { status = AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, ACPI_GPE_ENABLE); if (ACPI_FAILURE(status)) { device_printf(dev, "enable wake failed\n"); return (ENXIO); } acpi_set_flags(dev, flags | ACPI_FLAG_WAKE_ENABLED); } else { status = AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { device_printf(dev, "disable wake failed\n"); return (ENXIO); } acpi_set_flags(dev, flags & ~ACPI_FLAG_WAKE_ENABLED); } return (0); } static int acpi_wake_sleep_prep(ACPI_HANDLE handle, int sstate) { struct acpi_prw_data prw; device_t dev; /* Check that this is a wake-capable device and get its GPE. */ if (acpi_parse_prw(handle, &prw) != 0) return (ENXIO); dev = acpi_get_device(handle); /* * The destination sleep state must be less than (i.e., higher power) * or equal to the value specified by _PRW. If this GPE cannot be * enabled for the next sleep state, then disable it. If it can and * the user requested it be enabled, turn on any required power resources * and set _PSW. */ if (sstate > prw.lowest_wake) { AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, ACPI_GPE_DISABLE); if (bootverbose) device_printf(dev, "wake_prep disabled wake for %s (S%d)\n", acpi_name(handle), sstate); } else if (dev && (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) != 0) { acpi_pwr_wake_enable(handle, 1); acpi_SetInteger(handle, "_PSW", 1); if (bootverbose) device_printf(dev, "wake_prep enabled for %s (S%d)\n", acpi_name(handle), sstate); } return (0); } static int acpi_wake_run_prep(ACPI_HANDLE handle, int sstate) { struct acpi_prw_data prw; device_t dev; /* * Check that this is a wake-capable device and get its GPE. Return * now if the user didn't enable this device for wake. */ if (acpi_parse_prw(handle, &prw) != 0) return (ENXIO); dev = acpi_get_device(handle); if (dev == NULL || (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) == 0) return (0); /* * If this GPE couldn't be enabled for the previous sleep state, it was * disabled before going to sleep so re-enable it. If it was enabled, * clear _PSW and turn off any power resources it used. */ if (sstate > prw.lowest_wake) { AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, ACPI_GPE_ENABLE); if (bootverbose) device_printf(dev, "run_prep re-enabled %s\n", acpi_name(handle)); } else { acpi_SetInteger(handle, "_PSW", 0); acpi_pwr_wake_enable(handle, 0); if (bootverbose) device_printf(dev, "run_prep cleaned up for %s\n", acpi_name(handle)); } return (0); } static ACPI_STATUS acpi_wake_prep(ACPI_HANDLE handle, UINT32 level, void *context, void **status) { int sstate; /* If suspending, run the sleep prep function, otherwise wake. */ sstate = *(int *)context; if (AcpiGbl_SystemAwakeAndRunning) acpi_wake_sleep_prep(handle, sstate); else acpi_wake_run_prep(handle, sstate); return (AE_OK); } /* Walk the tree rooted at acpi0 to prep devices for suspend/resume. */ static int acpi_wake_prep_walk(int sstate) { ACPI_HANDLE sb_handle; if (ACPI_SUCCESS(AcpiGetHandle(ACPI_ROOT_OBJECT, "\\_SB_", &sb_handle))) AcpiWalkNamespace(ACPI_TYPE_DEVICE, sb_handle, 100, acpi_wake_prep, NULL, &sstate, NULL); return (0); } /* Walk the tree rooted at acpi0 to attach per-device wake sysctls. */ static int acpi_wake_sysctl_walk(device_t dev) { int error, i, numdevs; device_t *devlist; device_t child; ACPI_STATUS status; error = device_get_children(dev, &devlist, &numdevs); if (error != 0 || numdevs == 0) { if (numdevs == 0) free(devlist, M_TEMP); return (error); } for (i = 0; i < numdevs; i++) { child = devlist[i]; acpi_wake_sysctl_walk(child); if (!device_is_attached(child)) continue; status = AcpiEvaluateObject(acpi_get_handle(child), "_PRW", NULL, NULL); if (ACPI_SUCCESS(status)) { SYSCTL_ADD_PROC(device_get_sysctl_ctx(child), SYSCTL_CHILDREN(device_get_sysctl_tree(child)), OID_AUTO, "wake", CTLTYPE_INT | CTLFLAG_RW, child, 0, acpi_wake_set_sysctl, "I", "Device set to wake the system"); } } free(devlist, M_TEMP); return (0); } /* Enable or disable wake from userland. */ static int acpi_wake_set_sysctl(SYSCTL_HANDLER_ARGS) { int enable, error; device_t dev; dev = (device_t)arg1; enable = (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) ? 1 : 0; error = sysctl_handle_int(oidp, &enable, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (enable != 0 && enable != 1) return (EINVAL); return (acpi_wake_set_enable(dev, enable)); } /* Parse a device's _PRW into a structure. */ int acpi_parse_prw(ACPI_HANDLE h, struct acpi_prw_data *prw) { ACPI_STATUS status; ACPI_BUFFER prw_buffer; ACPI_OBJECT *res, *res2; int error, i, power_count; if (h == NULL || prw == NULL) return (EINVAL); /* * The _PRW object (7.2.9) is only required for devices that have the * ability to wake the system from a sleeping state. */ error = EINVAL; prw_buffer.Pointer = NULL; prw_buffer.Length = ACPI_ALLOCATE_BUFFER; status = AcpiEvaluateObject(h, "_PRW", NULL, &prw_buffer); if (ACPI_FAILURE(status)) return (ENOENT); res = (ACPI_OBJECT *)prw_buffer.Pointer; if (res == NULL) return (ENOENT); if (!ACPI_PKG_VALID(res, 2)) goto out; /* * Element 1 of the _PRW object: * The lowest power system sleeping state that can be entered while still * providing wake functionality. The sleeping state being entered must * be less than (i.e., higher power) or equal to this value. */ if (acpi_PkgInt32(res, 1, &prw->lowest_wake) != 0) goto out; /* * Element 0 of the _PRW object: */ switch (res->Package.Elements[0].Type) { case ACPI_TYPE_INTEGER: /* * If the data type of this package element is numeric, then this * _PRW package element is the bit index in the GPEx_EN, in the * GPE blocks described in the FADT, of the enable bit that is * enabled for the wake event. */ prw->gpe_handle = NULL; prw->gpe_bit = res->Package.Elements[0].Integer.Value; error = 0; break; case ACPI_TYPE_PACKAGE: /* * If the data type of this package element is a package, then this * _PRW package element is itself a package containing two * elements. The first is an object reference to the GPE Block * device that contains the GPE that will be triggered by the wake * event. The second element is numeric and it contains the bit * index in the GPEx_EN, in the GPE Block referenced by the * first element in the package, of the enable bit that is enabled for * the wake event. * * For example, if this field is a package then it is of the form: * Package() {\_SB.PCI0.ISA.GPE, 2} */ res2 = &res->Package.Elements[0]; if (!ACPI_PKG_VALID(res2, 2)) goto out; prw->gpe_handle = acpi_GetReference(NULL, &res2->Package.Elements[0]); if (prw->gpe_handle == NULL) goto out; if (acpi_PkgInt32(res2, 1, &prw->gpe_bit) != 0) goto out; error = 0; break; default: goto out; } /* Elements 2 to N of the _PRW object are power resources. */ power_count = res->Package.Count - 2; if (power_count > ACPI_PRW_MAX_POWERRES) { printf("ACPI device %s has too many power resources\n", acpi_name(h)); power_count = 0; } prw->power_res_count = power_count; for (i = 0; i < power_count; i++) prw->power_res[i] = res->Package.Elements[i]; out: if (prw_buffer.Pointer != NULL) AcpiOsFree(prw_buffer.Pointer); return (error); } /* * ACPI Event Handlers */ /* System Event Handlers (registered by EVENTHANDLER_REGISTER) */ static void acpi_system_eventhandler_sleep(void *arg, int state) { struct acpi_softc *sc = (struct acpi_softc *)arg; int ret; ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); /* Check if button action is disabled or unknown. */ if (state == ACPI_STATE_UNKNOWN) return; /* Request that the system prepare to enter the given suspend state. */ ret = acpi_ReqSleepState(sc, state); if (ret != 0) device_printf(sc->acpi_dev, "request to enter state S%d failed (err %d)\n", state, ret); return_VOID; } static void acpi_system_eventhandler_wakeup(void *arg, int state) { ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); /* Currently, nothing to do for wakeup. */ return_VOID; } /* * ACPICA Event Handlers (FixedEvent, also called from button notify handler) */ static void acpi_invoke_sleep_eventhandler(void *context) { EVENTHANDLER_INVOKE(acpi_sleep_event, *(int *)context); } static void acpi_invoke_wake_eventhandler(void *context) { EVENTHANDLER_INVOKE(acpi_wakeup_event, *(int *)context); } UINT32 acpi_event_power_button_sleep(void *context) { struct acpi_softc *sc = (struct acpi_softc *)context; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_invoke_sleep_eventhandler, &sc->acpi_power_button_sx))) return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); return_VALUE (ACPI_INTERRUPT_HANDLED); } UINT32 acpi_event_power_button_wake(void *context) { struct acpi_softc *sc = (struct acpi_softc *)context; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_invoke_wake_eventhandler, &sc->acpi_power_button_sx))) return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); return_VALUE (ACPI_INTERRUPT_HANDLED); } UINT32 acpi_event_sleep_button_sleep(void *context) { struct acpi_softc *sc = (struct acpi_softc *)context; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_invoke_sleep_eventhandler, &sc->acpi_sleep_button_sx))) return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); return_VALUE (ACPI_INTERRUPT_HANDLED); } UINT32 acpi_event_sleep_button_wake(void *context) { struct acpi_softc *sc = (struct acpi_softc *)context; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_invoke_wake_eventhandler, &sc->acpi_sleep_button_sx))) return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); return_VALUE (ACPI_INTERRUPT_HANDLED); } /* * XXX This static buffer is suboptimal. There is no locking so only * use this for single-threaded callers. */ char * acpi_name(ACPI_HANDLE handle) { ACPI_BUFFER buf; static char data[256]; buf.Length = sizeof(data); buf.Pointer = data; if (handle && ACPI_SUCCESS(AcpiGetName(handle, ACPI_FULL_PATHNAME, &buf))) return (data); return ("(unknown)"); } /* * Debugging/bug-avoidance. Avoid trying to fetch info on various * parts of the namespace. */ int acpi_avoid(ACPI_HANDLE handle) { char *cp, *env, *np; int len; np = acpi_name(handle); if (*np == '\\') np++; if ((env = kern_getenv("debug.acpi.avoid")) == NULL) return (0); /* Scan the avoid list checking for a match */ cp = env; for (;;) { while (*cp != 0 && isspace(*cp)) cp++; if (*cp == 0) break; len = 0; while (cp[len] != 0 && !isspace(cp[len])) len++; if (!strncmp(cp, np, len)) { freeenv(env); return(1); } cp += len; } freeenv(env); return (0); } /* * Debugging/bug-avoidance. Disable ACPI subsystem components. */ int acpi_disabled(char *subsys) { char *cp, *env; int len; if ((env = kern_getenv("debug.acpi.disabled")) == NULL) return (0); if (strcmp(env, "all") == 0) { freeenv(env); return (1); } /* Scan the disable list, checking for a match. */ cp = env; for (;;) { while (*cp != '\0' && isspace(*cp)) cp++; if (*cp == '\0') break; len = 0; while (cp[len] != '\0' && !isspace(cp[len])) len++; if (strncmp(cp, subsys, len) == 0) { freeenv(env); return (1); } cp += len; } freeenv(env); return (0); } static void acpi_lookup(void *arg, const char *name, device_t *dev) { ACPI_HANDLE handle; if (*dev != NULL) return; /* * Allow any handle name that is specified as an absolute path and * starts with '\'. We could restrict this to \_SB and friends, * but see acpi_probe_children() for notes on why we scan the entire * namespace for devices. * * XXX: The pathname argument to AcpiGetHandle() should be fixed to * be const. */ if (name[0] != '\\') return; if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, __DECONST(char *, name), &handle))) return; *dev = acpi_get_device(handle); } /* * Control interface. * * We multiplex ioctls for all participating ACPI devices here. Individual * drivers wanting to be accessible via /dev/acpi should use the * register/deregister interface to make their handlers visible. */ struct acpi_ioctl_hook { TAILQ_ENTRY(acpi_ioctl_hook) link; u_long cmd; acpi_ioctl_fn fn; void *arg; }; static TAILQ_HEAD(,acpi_ioctl_hook) acpi_ioctl_hooks; static int acpi_ioctl_hooks_initted; int acpi_register_ioctl(u_long cmd, acpi_ioctl_fn fn, void *arg) { struct acpi_ioctl_hook *hp; if ((hp = malloc(sizeof(*hp), M_ACPIDEV, M_NOWAIT)) == NULL) return (ENOMEM); hp->cmd = cmd; hp->fn = fn; hp->arg = arg; ACPI_LOCK(acpi); if (acpi_ioctl_hooks_initted == 0) { TAILQ_INIT(&acpi_ioctl_hooks); acpi_ioctl_hooks_initted = 1; } TAILQ_INSERT_TAIL(&acpi_ioctl_hooks, hp, link); ACPI_UNLOCK(acpi); return (0); } void acpi_deregister_ioctl(u_long cmd, acpi_ioctl_fn fn) { struct acpi_ioctl_hook *hp; ACPI_LOCK(acpi); TAILQ_FOREACH(hp, &acpi_ioctl_hooks, link) if (hp->cmd == cmd && hp->fn == fn) break; if (hp != NULL) { TAILQ_REMOVE(&acpi_ioctl_hooks, hp, link); free(hp, M_ACPIDEV); } ACPI_UNLOCK(acpi); } static int acpiopen(struct cdev *dev, int flag, int fmt, struct thread *td) { return (0); } static int acpiclose(struct cdev *dev, int flag, int fmt, struct thread *td) { return (0); } static int acpiioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { struct acpi_softc *sc; struct acpi_ioctl_hook *hp; int error, state; error = 0; hp = NULL; sc = dev->si_drv1; /* * Scan the list of registered ioctls, looking for handlers. */ ACPI_LOCK(acpi); if (acpi_ioctl_hooks_initted) TAILQ_FOREACH(hp, &acpi_ioctl_hooks, link) { if (hp->cmd == cmd) break; } ACPI_UNLOCK(acpi); if (hp) return (hp->fn(cmd, addr, hp->arg)); /* * Core ioctls are not permitted for non-writable user. * Currently, other ioctls just fetch information. * Not changing system behavior. */ if ((flag & FWRITE) == 0) return (EPERM); /* Core system ioctls. */ switch (cmd) { case ACPIIO_REQSLPSTATE: state = *(int *)addr; if (state != ACPI_STATE_S5) return (acpi_ReqSleepState(sc, state)); device_printf(sc->acpi_dev, "power off via acpi ioctl not supported\n"); error = EOPNOTSUPP; break; case ACPIIO_ACKSLPSTATE: error = *(int *)addr; error = acpi_AckSleepState(sc->acpi_clone, error); break; case ACPIIO_SETSLPSTATE: /* DEPRECATED */ state = *(int *)addr; if (state < ACPI_STATE_S0 || state > ACPI_S_STATES_MAX) return (EINVAL); if (!acpi_sleep_states[state]) return (EOPNOTSUPP); if (ACPI_FAILURE(acpi_SetSleepState(sc, state))) error = ENXIO; break; default: error = ENXIO; break; } return (error); } static int acpi_sname2sstate(const char *sname) { int sstate; if (toupper(sname[0]) == 'S') { sstate = sname[1] - '0'; if (sstate >= ACPI_STATE_S0 && sstate <= ACPI_STATE_S5 && sname[2] == '\0') return (sstate); } else if (strcasecmp(sname, "NONE") == 0) return (ACPI_STATE_UNKNOWN); return (-1); } static const char * acpi_sstate2sname(int sstate) { static const char *snames[] = { "S0", "S1", "S2", "S3", "S4", "S5" }; if (sstate >= ACPI_STATE_S0 && sstate <= ACPI_STATE_S5) return (snames[sstate]); else if (sstate == ACPI_STATE_UNKNOWN) return ("NONE"); return (NULL); } static int acpi_supported_sleep_state_sysctl(SYSCTL_HANDLER_ARGS) { int error; struct sbuf sb; UINT8 state; sbuf_new(&sb, NULL, 32, SBUF_AUTOEXTEND); for (state = ACPI_STATE_S1; state < ACPI_S_STATE_COUNT; state++) if (acpi_sleep_states[state]) sbuf_printf(&sb, "%s ", acpi_sstate2sname(state)); sbuf_trim(&sb); sbuf_finish(&sb); error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req); sbuf_delete(&sb); return (error); } static int acpi_sleep_state_sysctl(SYSCTL_HANDLER_ARGS) { char sleep_state[10]; int error, new_state, old_state; old_state = *(int *)oidp->oid_arg1; strlcpy(sleep_state, acpi_sstate2sname(old_state), sizeof(sleep_state)); error = sysctl_handle_string(oidp, sleep_state, sizeof(sleep_state), req); if (error == 0 && req->newptr != NULL) { new_state = acpi_sname2sstate(sleep_state); if (new_state < ACPI_STATE_S1) return (EINVAL); if (new_state < ACPI_S_STATE_COUNT && !acpi_sleep_states[new_state]) return (EOPNOTSUPP); if (new_state != old_state) *(int *)oidp->oid_arg1 = new_state; } return (error); } /* Inform devctl(4) when we receive a Notify. */ void acpi_UserNotify(const char *subsystem, ACPI_HANDLE h, uint8_t notify) { char notify_buf[16]; ACPI_BUFFER handle_buf; ACPI_STATUS status; if (subsystem == NULL) return; handle_buf.Pointer = NULL; handle_buf.Length = ACPI_ALLOCATE_BUFFER; status = AcpiNsHandleToPathname(h, &handle_buf, FALSE); if (ACPI_FAILURE(status)) return; snprintf(notify_buf, sizeof(notify_buf), "notify=0x%02x", notify); devctl_notify("ACPI", subsystem, handle_buf.Pointer, notify_buf); AcpiOsFree(handle_buf.Pointer); } #ifdef ACPI_DEBUG /* * Support for parsing debug options from the kernel environment. * * Bits may be set in the AcpiDbgLayer and AcpiDbgLevel debug registers * by specifying the names of the bits in the debug.acpi.layer and * debug.acpi.level environment variables. Bits may be unset by * prefixing the bit name with !. */ struct debugtag { char *name; UINT32 value; }; static struct debugtag dbg_layer[] = { {"ACPI_UTILITIES", ACPI_UTILITIES}, {"ACPI_HARDWARE", ACPI_HARDWARE}, {"ACPI_EVENTS", ACPI_EVENTS}, {"ACPI_TABLES", ACPI_TABLES}, {"ACPI_NAMESPACE", ACPI_NAMESPACE}, {"ACPI_PARSER", ACPI_PARSER}, {"ACPI_DISPATCHER", ACPI_DISPATCHER}, {"ACPI_EXECUTER", ACPI_EXECUTER}, {"ACPI_RESOURCES", ACPI_RESOURCES}, {"ACPI_CA_DEBUGGER", ACPI_CA_DEBUGGER}, {"ACPI_OS_SERVICES", ACPI_OS_SERVICES}, {"ACPI_CA_DISASSEMBLER", ACPI_CA_DISASSEMBLER}, {"ACPI_ALL_COMPONENTS", ACPI_ALL_COMPONENTS}, {"ACPI_AC_ADAPTER", ACPI_AC_ADAPTER}, {"ACPI_BATTERY", ACPI_BATTERY}, {"ACPI_BUS", ACPI_BUS}, {"ACPI_BUTTON", ACPI_BUTTON}, {"ACPI_EC", ACPI_EC}, {"ACPI_FAN", ACPI_FAN}, {"ACPI_POWERRES", ACPI_POWERRES}, {"ACPI_PROCESSOR", ACPI_PROCESSOR}, {"ACPI_THERMAL", ACPI_THERMAL}, {"ACPI_TIMER", ACPI_TIMER}, {"ACPI_ALL_DRIVERS", ACPI_ALL_DRIVERS}, {NULL, 0} }; static struct debugtag dbg_level[] = { {"ACPI_LV_INIT", ACPI_LV_INIT}, {"ACPI_LV_DEBUG_OBJECT", ACPI_LV_DEBUG_OBJECT}, {"ACPI_LV_INFO", ACPI_LV_INFO}, {"ACPI_LV_REPAIR", ACPI_LV_REPAIR}, {"ACPI_LV_ALL_EXCEPTIONS", ACPI_LV_ALL_EXCEPTIONS}, /* Trace verbosity level 1 [Standard Trace Level] */ {"ACPI_LV_INIT_NAMES", ACPI_LV_INIT_NAMES}, {"ACPI_LV_PARSE", ACPI_LV_PARSE}, {"ACPI_LV_LOAD", ACPI_LV_LOAD}, {"ACPI_LV_DISPATCH", ACPI_LV_DISPATCH}, {"ACPI_LV_EXEC", ACPI_LV_EXEC}, {"ACPI_LV_NAMES", ACPI_LV_NAMES}, {"ACPI_LV_OPREGION", ACPI_LV_OPREGION}, {"ACPI_LV_BFIELD", ACPI_LV_BFIELD}, {"ACPI_LV_TABLES", ACPI_LV_TABLES}, {"ACPI_LV_VALUES", ACPI_LV_VALUES}, {"ACPI_LV_OBJECTS", ACPI_LV_OBJECTS}, {"ACPI_LV_RESOURCES", ACPI_LV_RESOURCES}, {"ACPI_LV_USER_REQUESTS", ACPI_LV_USER_REQUESTS}, {"ACPI_LV_PACKAGE", ACPI_LV_PACKAGE}, {"ACPI_LV_VERBOSITY1", ACPI_LV_VERBOSITY1}, /* Trace verbosity level 2 [Function tracing and memory allocation] */ {"ACPI_LV_ALLOCATIONS", ACPI_LV_ALLOCATIONS}, {"ACPI_LV_FUNCTIONS", ACPI_LV_FUNCTIONS}, {"ACPI_LV_OPTIMIZATIONS", ACPI_LV_OPTIMIZATIONS}, {"ACPI_LV_VERBOSITY2", ACPI_LV_VERBOSITY2}, {"ACPI_LV_ALL", ACPI_LV_ALL}, /* Trace verbosity level 3 [Threading, I/O, and Interrupts] */ {"ACPI_LV_MUTEX", ACPI_LV_MUTEX}, {"ACPI_LV_THREADS", ACPI_LV_THREADS}, {"ACPI_LV_IO", ACPI_LV_IO}, {"ACPI_LV_INTERRUPTS", ACPI_LV_INTERRUPTS}, {"ACPI_LV_VERBOSITY3", ACPI_LV_VERBOSITY3}, /* Exceptionally verbose output -- also used in the global "DebugLevel" */ {"ACPI_LV_AML_DISASSEMBLE", ACPI_LV_AML_DISASSEMBLE}, {"ACPI_LV_VERBOSE_INFO", ACPI_LV_VERBOSE_INFO}, {"ACPI_LV_FULL_TABLES", ACPI_LV_FULL_TABLES}, {"ACPI_LV_EVENTS", ACPI_LV_EVENTS}, {"ACPI_LV_VERBOSE", ACPI_LV_VERBOSE}, {NULL, 0} }; static void acpi_parse_debug(char *cp, struct debugtag *tag, UINT32 *flag) { char *ep; int i, l; int set; while (*cp) { if (isspace(*cp)) { cp++; continue; } ep = cp; while (*ep && !isspace(*ep)) ep++; if (*cp == '!') { set = 0; cp++; if (cp == ep) continue; } else { set = 1; } l = ep - cp; for (i = 0; tag[i].name != NULL; i++) { if (!strncmp(cp, tag[i].name, l)) { if (set) *flag |= tag[i].value; else *flag &= ~tag[i].value; } } cp = ep; } } static void acpi_set_debugging(void *junk) { char *layer, *level; if (cold) { AcpiDbgLayer = 0; AcpiDbgLevel = 0; } layer = kern_getenv("debug.acpi.layer"); level = kern_getenv("debug.acpi.level"); if (layer == NULL && level == NULL) return; printf("ACPI set debug"); if (layer != NULL) { if (strcmp("NONE", layer) != 0) printf(" layer '%s'", layer); acpi_parse_debug(layer, &dbg_layer[0], &AcpiDbgLayer); freeenv(layer); } if (level != NULL) { if (strcmp("NONE", level) != 0) printf(" level '%s'", level); acpi_parse_debug(level, &dbg_level[0], &AcpiDbgLevel); freeenv(level); } printf("\n"); } SYSINIT(acpi_debugging, SI_SUB_TUNABLES, SI_ORDER_ANY, acpi_set_debugging, NULL); static int acpi_debug_sysctl(SYSCTL_HANDLER_ARGS) { int error, *dbg; struct debugtag *tag; struct sbuf sb; char temp[128]; if (sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND) == NULL) return (ENOMEM); if (strcmp(oidp->oid_arg1, "debug.acpi.layer") == 0) { tag = &dbg_layer[0]; dbg = &AcpiDbgLayer; } else { tag = &dbg_level[0]; dbg = &AcpiDbgLevel; } /* Get old values if this is a get request. */ ACPI_SERIAL_BEGIN(acpi); if (*dbg == 0) { sbuf_cpy(&sb, "NONE"); } else if (req->newptr == NULL) { for (; tag->name != NULL; tag++) { if ((*dbg & tag->value) == tag->value) sbuf_printf(&sb, "%s ", tag->name); } } sbuf_trim(&sb); sbuf_finish(&sb); strlcpy(temp, sbuf_data(&sb), sizeof(temp)); sbuf_delete(&sb); error = sysctl_handle_string(oidp, temp, sizeof(temp), req); /* Check for error or no change */ if (error == 0 && req->newptr != NULL) { *dbg = 0; kern_setenv((char *)oidp->oid_arg1, temp); acpi_set_debugging(NULL); } ACPI_SERIAL_END(acpi); return (error); } SYSCTL_PROC(_debug_acpi, OID_AUTO, layer, CTLFLAG_RW | CTLTYPE_STRING, "debug.acpi.layer", 0, acpi_debug_sysctl, "A", ""); SYSCTL_PROC(_debug_acpi, OID_AUTO, level, CTLFLAG_RW | CTLTYPE_STRING, "debug.acpi.level", 0, acpi_debug_sysctl, "A", ""); #endif /* ACPI_DEBUG */ static int acpi_debug_objects_sysctl(SYSCTL_HANDLER_ARGS) { int error; int old; old = acpi_debug_objects; error = sysctl_handle_int(oidp, &acpi_debug_objects, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (old == acpi_debug_objects || (old && acpi_debug_objects)) return (0); ACPI_SERIAL_BEGIN(acpi); AcpiGbl_EnableAmlDebugObject = acpi_debug_objects ? TRUE : FALSE; ACPI_SERIAL_END(acpi); return (0); } static int acpi_parse_interfaces(char *str, struct acpi_interface *iface) { char *p; size_t len; int i, j; p = str; while (isspace(*p) || *p == ',') p++; len = strlen(p); if (len == 0) return (0); p = strdup(p, M_TEMP); for (i = 0; i < len; i++) if (p[i] == ',') p[i] = '\0'; i = j = 0; while (i < len) if (isspace(p[i]) || p[i] == '\0') i++; else { i += strlen(p + i) + 1; j++; } if (j == 0) { free(p, M_TEMP); return (0); } iface->data = malloc(sizeof(*iface->data) * j, M_TEMP, M_WAITOK); iface->num = j; i = j = 0; while (i < len) if (isspace(p[i]) || p[i] == '\0') i++; else { iface->data[j] = p + i; i += strlen(p + i) + 1; j++; } return (j); } static void acpi_free_interfaces(struct acpi_interface *iface) { free(iface->data[0], M_TEMP); free(iface->data, M_TEMP); } static void acpi_reset_interfaces(device_t dev) { struct acpi_interface list; ACPI_STATUS status; int i; if (acpi_parse_interfaces(acpi_install_interface, &list) > 0) { for (i = 0; i < list.num; i++) { status = AcpiInstallInterface(list.data[i]); if (ACPI_FAILURE(status)) device_printf(dev, "failed to install _OSI(\"%s\"): %s\n", list.data[i], AcpiFormatException(status)); else if (bootverbose) device_printf(dev, "installed _OSI(\"%s\")\n", list.data[i]); } acpi_free_interfaces(&list); } if (acpi_parse_interfaces(acpi_remove_interface, &list) > 0) { for (i = 0; i < list.num; i++) { status = AcpiRemoveInterface(list.data[i]); if (ACPI_FAILURE(status)) device_printf(dev, "failed to remove _OSI(\"%s\"): %s\n", list.data[i], AcpiFormatException(status)); else if (bootverbose) device_printf(dev, "removed _OSI(\"%s\")\n", list.data[i]); } acpi_free_interfaces(&list); } } static int acpi_pm_func(u_long cmd, void *arg, ...) { int state, acpi_state; int error; struct acpi_softc *sc; va_list ap; error = 0; switch (cmd) { case POWER_CMD_SUSPEND: sc = (struct acpi_softc *)arg; if (sc == NULL) { error = EINVAL; goto out; } va_start(ap, arg); state = va_arg(ap, int); va_end(ap); switch (state) { case POWER_SLEEP_STATE_STANDBY: acpi_state = sc->acpi_standby_sx; break; case POWER_SLEEP_STATE_SUSPEND: acpi_state = sc->acpi_suspend_sx; break; case POWER_SLEEP_STATE_HIBERNATE: acpi_state = ACPI_STATE_S4; break; default: error = EINVAL; goto out; } if (ACPI_FAILURE(acpi_EnterSleepState(sc, acpi_state))) error = ENXIO; break; default: error = EINVAL; goto out; } out: return (error); } static void acpi_pm_register(void *arg) { if (!cold || resource_disabled("acpi", 0)) return; power_pm_register(POWER_PM_TYPE_ACPI, acpi_pm_func, NULL); } SYSINIT(power, SI_SUB_KLD, SI_ORDER_ANY, acpi_pm_register, NULL); Index: head/sys/dev/acpica/acpi_pcib.c =================================================================== --- head/sys/dev/acpica/acpi_pcib.c (revision 340597) +++ head/sys/dev/acpica/acpi_pcib.c (revision 340598) @@ -1,275 +1,281 @@ /*- * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_acpi.h" #include #include #include #include #include #include #include #include #include #include "pcib_if.h" /* Hooks for the ACPI CA debugging infrastructure. */ #define _COMPONENT ACPI_BUS ACPI_MODULE_NAME("PCI") ACPI_SERIAL_DECL(pcib, "ACPI PCI bus methods"); /* * For locking, we assume the caller is not concurrent since this is * triggered by newbus methods. */ struct prt_lookup_request { ACPI_PCI_ROUTING_TABLE *pr_entry; u_int pr_pin; u_int pr_slot; }; typedef void prt_entry_handler(ACPI_PCI_ROUTING_TABLE *entry, void *arg); static void prt_attach_devices(ACPI_PCI_ROUTING_TABLE *entry, void *arg); static void prt_lookup_device(ACPI_PCI_ROUTING_TABLE *entry, void *arg); static void prt_walk_table(ACPI_BUFFER *prt, prt_entry_handler *handler, void *arg); static void prt_walk_table(ACPI_BUFFER *prt, prt_entry_handler *handler, void *arg) { ACPI_PCI_ROUTING_TABLE *entry; char *prtptr; /* First check to see if there is a table to walk. */ if (prt == NULL || prt->Pointer == NULL) return; /* Walk the table executing the handler function for each entry. */ prtptr = prt->Pointer; entry = (ACPI_PCI_ROUTING_TABLE *)prtptr; while (entry->Length != 0) { handler(entry, arg); prtptr += entry->Length; entry = (ACPI_PCI_ROUTING_TABLE *)prtptr; } } static void prt_attach_devices(ACPI_PCI_ROUTING_TABLE *entry, void *arg) { ACPI_HANDLE handle; device_t child, pcib; int error; /* We only care about entries that reference a link device. */ if (entry->Source[0] == '\0') return; /* * In practice, we only see SourceIndex's of 0 out in the wild. * When indices != 0 have been found, they've been bugs in the ASL. */ if (entry->SourceIndex != 0) return; /* Lookup the associated handle and device. */ pcib = (device_t)arg; if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, entry->Source, &handle))) return; child = acpi_get_device(handle); if (child == NULL) return; /* If the device hasn't been probed yet, force it to do so. */ error = device_probe_and_attach(child); if (error != 0) { device_printf(pcib, "failed to force attach of %s\n", acpi_name(handle)); return; } /* Add a reference for a specific bus/device/pin tuple. */ acpi_pci_link_add_reference(child, entry->SourceIndex, pcib, ACPI_ADR_PCI_SLOT(entry->Address), entry->Pin); } void acpi_pcib_fetch_prt(device_t dev, ACPI_BUFFER *prt) { ACPI_STATUS status; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); /* * Get the PCI interrupt routing table for this bus. If we can't * get it, this is not an error but may reduce functionality. There * are several valid bridges in the field that do not have a _PRT, so * only warn about missing tables if bootverbose is set. */ prt->Length = ACPI_ALLOCATE_BUFFER; status = AcpiGetIrqRoutingTable(acpi_get_handle(dev), prt); if (ACPI_FAILURE(status) && (bootverbose || status != AE_NOT_FOUND)) device_printf(dev, "could not get PCI interrupt routing table for %s - %s\n", acpi_name(acpi_get_handle(dev)), AcpiFormatException(status)); /* * Ensure all the link devices are attached. */ prt_walk_table(prt, prt_attach_devices, dev); } static void prt_lookup_device(ACPI_PCI_ROUTING_TABLE *entry, void *arg) { struct prt_lookup_request *pr; pr = (struct prt_lookup_request *)arg; if (pr->pr_entry != NULL) return; /* * Compare the slot number (high word of Address) and pin number * (note that ACPI uses 0 for INTA) to check for a match. * * Note that the low word of the Address field (function number) * is required by the specification to be 0xffff. We don't risk * checking it here. */ if (ACPI_ADR_PCI_SLOT(entry->Address) == pr->pr_slot && entry->Pin == pr->pr_pin) pr->pr_entry = entry; } /* * Route an interrupt for a child of the bridge. */ int acpi_pcib_route_interrupt(device_t pcib, device_t dev, int pin, ACPI_BUFFER *prtbuf) { ACPI_PCI_ROUTING_TABLE *prt; struct prt_lookup_request pr; ACPI_HANDLE lnkdev; int interrupt; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); + lnkdev = NULL; interrupt = PCI_INVALID_IRQ; /* ACPI numbers pins 0-3, not 1-4 like the BIOS. */ pin--; ACPI_SERIAL_BEGIN(pcib); /* Search for a matching entry in the routing table. */ pr.pr_entry = NULL; pr.pr_pin = pin; pr.pr_slot = pci_get_slot(dev); prt_walk_table(prtbuf, prt_lookup_device, &pr); if (pr.pr_entry == NULL) { device_printf(pcib, "no PRT entry for %d.%d.INT%c\n", pci_get_bus(dev), pci_get_slot(dev), 'A' + pin); goto out; } prt = pr.pr_entry; if (bootverbose) { device_printf(pcib, "matched entry for %d.%d.INT%c", pci_get_bus(dev), pci_get_slot(dev), 'A' + pin); if (prt->Source[0] != '\0') printf(" (src %s:%u)", prt->Source, prt->SourceIndex); printf("\n"); } /* * If source is empty/NULL, the source index is a global IRQ number * and it's hard-wired so we're done. * * XXX: If the source index is non-zero, ignore the source device and * assume that this is a hard-wired entry. */ if (prt->Source[0] == '\0' || prt->SourceIndex != 0) { if (bootverbose) device_printf(pcib, "slot %d INT%c hardwired to IRQ %d\n", pci_get_slot(dev), 'A' + pin, prt->SourceIndex); if (prt->SourceIndex) { interrupt = prt->SourceIndex; BUS_CONFIG_INTR(dev, interrupt, INTR_TRIGGER_LEVEL, INTR_POLARITY_LOW); } else device_printf(pcib, "error: invalid hard-wired IRQ of 0\n"); goto out; } /* * We have to find the source device (PCI interrupt link device). */ if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, prt->Source, &lnkdev))) { device_printf(pcib, "couldn't find PCI interrupt link device %s\n", prt->Source); goto out; } interrupt = acpi_pci_link_route_interrupt(acpi_get_device(lnkdev), prt->SourceIndex); if (bootverbose && PCI_INTERRUPT_VALID(interrupt)) device_printf(pcib, "slot %d INT%c routed to irq %d via %s\n", pci_get_slot(dev), 'A' + pin, interrupt, acpi_name(lnkdev)); out: ACPI_SERIAL_END(pcib); - +#ifdef INTRNG + if (PCI_INTERRUPT_VALID(interrupt)) { + interrupt = acpi_map_intr(dev, interrupt, lnkdev); + KASSERT(PCI_INTERRUPT_VALID(interrupt), ("mapping fail")); + } +#endif return_VALUE(interrupt); } int acpi_pcib_power_for_sleep(device_t pcib, device_t dev, int *pstate) { device_t acpi_dev; acpi_dev = devclass_get_device(devclass_find("acpi"), 0); acpi_device_pwr_for_sleep(acpi_dev, dev, pstate); return (0); } int acpi_pcib_get_cpus(device_t pcib, device_t dev, enum cpu_sets op, size_t setsize, cpuset_t *cpuset) { return (bus_get_cpus(pcib, op, setsize, cpuset)); } Index: head/sys/dev/acpica/acpi_resource.c =================================================================== --- head/sys/dev/acpica/acpi_resource.c (revision 340597) +++ head/sys/dev/acpica/acpi_resource.c (revision 340598) @@ -1,777 +1,808 @@ /*- * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_acpi.h" #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INTRNG #include "acpi_bus_if.h" #endif /* Hooks for the ACPI CA debugging infrastructure */ #define _COMPONENT ACPI_BUS ACPI_MODULE_NAME("RESOURCE") struct lookup_irq_request { ACPI_RESOURCE *acpi_res; - struct resource *res; + u_int irq; int counter; int rid; int found; + int checkrid; + int trig; + int pol; }; static ACPI_STATUS acpi_lookup_irq_handler(ACPI_RESOURCE *res, void *context) { struct lookup_irq_request *req; size_t len; - u_int irqnum, irq; + u_int irqnum, irq, trig, pol; switch (res->Type) { case ACPI_RESOURCE_TYPE_IRQ: irqnum = res->Data.Irq.InterruptCount; irq = res->Data.Irq.Interrupts[0]; len = ACPI_RS_SIZE(ACPI_RESOURCE_IRQ); + trig = res->Data.Irq.Triggering; + pol = res->Data.Irq.Polarity; break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: irqnum = res->Data.ExtendedIrq.InterruptCount; irq = res->Data.ExtendedIrq.Interrupts[0]; len = ACPI_RS_SIZE(ACPI_RESOURCE_EXTENDED_IRQ); + trig = res->Data.ExtendedIrq.Triggering; + pol = res->Data.ExtendedIrq.Polarity; break; default: return (AE_OK); } if (irqnum != 1) return (AE_OK); req = (struct lookup_irq_request *)context; - if (req->counter != req->rid) { - req->counter++; - return (AE_OK); + if (req->checkrid) { + if (req->counter != req->rid) { + req->counter++; + return (AE_OK); + } + KASSERT(irq == req->irq, ("IRQ resources do not match")); + } else { + if (req->irq != irq) + return (AE_OK); } req->found = 1; - KASSERT(irq == rman_get_start(req->res), - ("IRQ resources do not match")); - bcopy(res, req->acpi_res, len); + req->pol = pol; + req->trig = trig; + if (req->acpi_res != NULL) + bcopy(res, req->acpi_res, len); return (AE_CTRL_TERMINATE); } ACPI_STATUS acpi_lookup_irq_resource(device_t dev, int rid, struct resource *res, ACPI_RESOURCE *acpi_res) { struct lookup_irq_request req; ACPI_STATUS status; req.acpi_res = acpi_res; - req.res = res; + req.irq = rman_get_start(res); req.counter = 0; req.rid = rid; req.found = 0; + req.checkrid = 1; status = AcpiWalkResources(acpi_get_handle(dev), "_CRS", acpi_lookup_irq_handler, &req); if (ACPI_SUCCESS(status) && req.found == 0) status = AE_NOT_FOUND; return (status); } void acpi_config_intr(device_t dev, ACPI_RESOURCE *res) { u_int irq; int pol, trig; switch (res->Type) { case ACPI_RESOURCE_TYPE_IRQ: KASSERT(res->Data.Irq.InterruptCount == 1, ("%s: multiple interrupts", __func__)); irq = res->Data.Irq.Interrupts[0]; trig = res->Data.Irq.Triggering; pol = res->Data.Irq.Polarity; break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: KASSERT(res->Data.ExtendedIrq.InterruptCount == 1, ("%s: multiple interrupts", __func__)); irq = res->Data.ExtendedIrq.Interrupts[0]; trig = res->Data.ExtendedIrq.Triggering; pol = res->Data.ExtendedIrq.Polarity; break; default: panic("%s: bad resource type %u", __func__, res->Type); } #if defined(__amd64__) || defined(__i386__) /* * XXX: Certain BIOSes have buggy AML that specify an IRQ that is * edge-sensitive and active-lo. However, edge-sensitive IRQs * should be active-hi. Force IRQs with an ISA IRQ value to be * active-hi instead. */ if (irq < 16 && trig == ACPI_EDGE_SENSITIVE && pol == ACPI_ACTIVE_LOW) pol = ACPI_ACTIVE_HIGH; #endif BUS_CONFIG_INTR(dev, irq, (trig == ACPI_EDGE_SENSITIVE) ? INTR_TRIGGER_EDGE : INTR_TRIGGER_LEVEL, (pol == ACPI_ACTIVE_HIGH) ? INTR_POLARITY_HIGH : INTR_POLARITY_LOW); } +#ifdef INTRNG +int +acpi_map_intr(device_t dev, u_int irq, ACPI_HANDLE handle) +{ + struct lookup_irq_request req; + int trig, pol; + + trig = ACPI_LEVEL_SENSITIVE; + pol = ACPI_ACTIVE_HIGH; + if (handle != NULL) { + req.found = 0; + req.acpi_res = NULL; + req.irq = irq; + req.counter = 0; + req.rid = 0; + req.checkrid = 0; + AcpiWalkResources(handle, "_CRS", acpi_lookup_irq_handler, &req); + if (req.found != 0) { + trig = req.trig; + pol = req.pol; + } + } + return ACPI_BUS_MAP_INTR(device_get_parent(dev), dev, irq, + (trig == ACPI_EDGE_SENSITIVE) ? INTR_TRIGGER_EDGE : INTR_TRIGGER_LEVEL, + (pol == ACPI_ACTIVE_HIGH) ? INTR_POLARITY_HIGH : INTR_POLARITY_LOW); +} +#endif + struct acpi_resource_context { struct acpi_parse_resource_set *set; device_t dev; void *context; }; #ifdef ACPI_DEBUG_OUTPUT static const char * acpi_address_range_name(UINT8 ResourceType) { static char buf[16]; switch (ResourceType) { case ACPI_MEMORY_RANGE: return ("Memory"); case ACPI_IO_RANGE: return ("IO"); case ACPI_BUS_NUMBER_RANGE: return ("Bus Number"); default: snprintf(buf, sizeof(buf), "type %u", ResourceType); return (buf); } } #endif static ACPI_STATUS acpi_parse_resource(ACPI_RESOURCE *res, void *context) { struct acpi_parse_resource_set *set; struct acpi_resource_context *arc; UINT64 min, max, length, gran; #ifdef ACPI_DEBUG const char *name; #endif device_t dev; arc = context; dev = arc->dev; set = arc->set; switch (res->Type) { case ACPI_RESOURCE_TYPE_END_TAG: ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "EndTag\n")); break; case ACPI_RESOURCE_TYPE_FIXED_IO: if (res->Data.FixedIo.AddressLength <= 0) break; ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "FixedIo 0x%x/%d\n", res->Data.FixedIo.Address, res->Data.FixedIo.AddressLength)); set->set_ioport(dev, arc->context, res->Data.FixedIo.Address, res->Data.FixedIo.AddressLength); break; case ACPI_RESOURCE_TYPE_IO: if (res->Data.Io.AddressLength <= 0) break; if (res->Data.Io.Minimum == res->Data.Io.Maximum) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Io 0x%x/%d\n", res->Data.Io.Minimum, res->Data.Io.AddressLength)); set->set_ioport(dev, arc->context, res->Data.Io.Minimum, res->Data.Io.AddressLength); } else { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Io 0x%x-0x%x/%d\n", res->Data.Io.Minimum, res->Data.Io.Maximum, res->Data.Io.AddressLength)); set->set_iorange(dev, arc->context, res->Data.Io.Minimum, res->Data.Io.Maximum, res->Data.Io.AddressLength, res->Data.Io.Alignment); } break; case ACPI_RESOURCE_TYPE_FIXED_MEMORY32: if (res->Data.FixedMemory32.AddressLength <= 0) break; ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "FixedMemory32 0x%x/%d\n", res->Data.FixedMemory32.Address, res->Data.FixedMemory32.AddressLength)); set->set_memory(dev, arc->context, res->Data.FixedMemory32.Address, res->Data.FixedMemory32.AddressLength); break; case ACPI_RESOURCE_TYPE_MEMORY32: if (res->Data.Memory32.AddressLength <= 0) break; if (res->Data.Memory32.Minimum == res->Data.Memory32.Maximum) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Memory32 0x%x/%d\n", res->Data.Memory32.Minimum, res->Data.Memory32.AddressLength)); set->set_memory(dev, arc->context, res->Data.Memory32.Minimum, res->Data.Memory32.AddressLength); } else { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Memory32 0x%x-0x%x/%d\n", res->Data.Memory32.Minimum, res->Data.Memory32.Maximum, res->Data.Memory32.AddressLength)); set->set_memoryrange(dev, arc->context, res->Data.Memory32.Minimum, res->Data.Memory32.Maximum, res->Data.Memory32.AddressLength, res->Data.Memory32.Alignment); } break; case ACPI_RESOURCE_TYPE_MEMORY24: if (res->Data.Memory24.AddressLength <= 0) break; if (res->Data.Memory24.Minimum == res->Data.Memory24.Maximum) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Memory24 0x%x/%d\n", res->Data.Memory24.Minimum, res->Data.Memory24.AddressLength)); set->set_memory(dev, arc->context, res->Data.Memory24.Minimum, res->Data.Memory24.AddressLength); } else { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Memory24 0x%x-0x%x/%d\n", res->Data.Memory24.Minimum, res->Data.Memory24.Maximum, res->Data.Memory24.AddressLength)); set->set_memoryrange(dev, arc->context, res->Data.Memory24.Minimum, res->Data.Memory24.Maximum, res->Data.Memory24.AddressLength, res->Data.Memory24.Alignment); } break; case ACPI_RESOURCE_TYPE_IRQ: /* * from 1.0b 6.4.2 * "This structure is repeated for each separate interrupt * required" */ set->set_irq(dev, arc->context, res->Data.Irq.Interrupts, res->Data.Irq.InterruptCount, res->Data.Irq.Triggering, res->Data.Irq.Polarity); break; case ACPI_RESOURCE_TYPE_DMA: /* * from 1.0b 6.4.3 * "This structure is repeated for each separate DMA channel * required" */ set->set_drq(dev, arc->context, res->Data.Dma.Channels, res->Data.Dma.ChannelCount); break; case ACPI_RESOURCE_TYPE_START_DEPENDENT: ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "start dependent functions\n")); set->set_start_dependent(dev, arc->context, res->Data.StartDpf.CompatibilityPriority); break; case ACPI_RESOURCE_TYPE_END_DEPENDENT: ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "end dependent functions\n")); set->set_end_dependent(dev, arc->context); break; case ACPI_RESOURCE_TYPE_ADDRESS16: case ACPI_RESOURCE_TYPE_ADDRESS32: case ACPI_RESOURCE_TYPE_ADDRESS64: case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64: switch (res->Type) { case ACPI_RESOURCE_TYPE_ADDRESS16: gran = res->Data.Address16.Address.Granularity; min = res->Data.Address16.Address.Minimum; max = res->Data.Address16.Address.Maximum; length = res->Data.Address16.Address.AddressLength; #ifdef ACPI_DEBUG name = "Address16"; #endif break; case ACPI_RESOURCE_TYPE_ADDRESS32: gran = res->Data.Address32.Address.Granularity; min = res->Data.Address32.Address.Minimum; max = res->Data.Address32.Address.Maximum; length = res->Data.Address32.Address.AddressLength; #ifdef ACPI_DEBUG name = "Address32"; #endif break; case ACPI_RESOURCE_TYPE_ADDRESS64: gran = res->Data.Address64.Address.Granularity; min = res->Data.Address64.Address.Minimum; max = res->Data.Address64.Address.Maximum; length = res->Data.Address64.Address.AddressLength; #ifdef ACPI_DEBUG name = "Address64"; #endif break; default: KASSERT(res->Type == ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64, ("should never happen")); gran = res->Data.ExtAddress64.Address.Granularity; min = res->Data.ExtAddress64.Address.Minimum; max = res->Data.ExtAddress64.Address.Maximum; length = res->Data.ExtAddress64.Address.AddressLength; #ifdef ACPI_DEBUG name = "ExtAddress64"; #endif break; } if (length <= 0) break; if (res->Type == ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 && res->Data.Address.ProducerConsumer != ACPI_CONSUMER) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "ignored %s %s producer\n", name, acpi_address_range_name(res->Data.Address.ResourceType))); break; } if (res->Data.Address.ResourceType != ACPI_MEMORY_RANGE && res->Data.Address.ResourceType != ACPI_IO_RANGE) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "ignored %s for non-memory, non-I/O\n", name)); break; } #ifdef __i386__ if (min > ULONG_MAX || (res->Data.Address.MaxAddressFixed && max > ULONG_MAX)) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "ignored %s above 4G\n", name)); break; } if (max > ULONG_MAX) max = ULONG_MAX; #endif if (res->Data.Address.MinAddressFixed == ACPI_ADDRESS_FIXED && res->Data.Address.MaxAddressFixed == ACPI_ADDRESS_FIXED) { if (res->Data.Address.ResourceType == ACPI_MEMORY_RANGE) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "%s/Memory 0x%jx/%ju\n", name, (uintmax_t)min, (uintmax_t)length)); set->set_memory(dev, arc->context, min, length); } else { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "%s/IO 0x%jx/%ju\n", name, (uintmax_t)min, (uintmax_t)length)); set->set_ioport(dev, arc->context, min, length); } } else { if (res->Data.Address32.ResourceType == ACPI_MEMORY_RANGE) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "%s/Memory 0x%jx-0x%jx/%ju\n", name, (uintmax_t)min, (uintmax_t)max, (uintmax_t)length)); set->set_memoryrange(dev, arc->context, min, max, length, gran); } else { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "%s/IO 0x%jx-0x%jx/%ju\n", name, (uintmax_t)min, (uintmax_t)max, (uintmax_t)length)); set->set_iorange(dev, arc->context, min, max, length, gran); } } break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: if (res->Data.ExtendedIrq.ProducerConsumer != ACPI_CONSUMER) { ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "ignored ExtIRQ producer\n")); break; } set->set_ext_irq(dev, arc->context, res->Data.ExtendedIrq.Interrupts, res->Data.ExtendedIrq.InterruptCount, res->Data.ExtendedIrq.Triggering, res->Data.ExtendedIrq.Polarity); break; case ACPI_RESOURCE_TYPE_VENDOR: ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "unimplemented VendorSpecific resource\n")); break; default: break; } return (AE_OK); } /* * Fetch a device's resources and associate them with the device. * * Note that it might be nice to also locate ACPI-specific resource items, such * as GPE bits. * * We really need to split the resource-fetching code out from the * resource-parsing code, since we may want to use the parsing * code for _PRS someday. */ ACPI_STATUS acpi_parse_resources(device_t dev, ACPI_HANDLE handle, struct acpi_parse_resource_set *set, void *arg) { struct acpi_resource_context arc; ACPI_STATUS status; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); set->set_init(dev, arg, &arc.context); arc.set = set; arc.dev = dev; status = AcpiWalkResources(handle, "_CRS", acpi_parse_resource, &arc); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { printf("can't fetch resources for %s - %s\n", acpi_name(handle), AcpiFormatException(status)); return_ACPI_STATUS (status); } set->set_done(dev, arc.context); return_ACPI_STATUS (AE_OK); } /* * Resource-set vectors used to attach _CRS-derived resources * to an ACPI device. */ static void acpi_res_set_init(device_t dev, void *arg, void **context); static void acpi_res_set_done(device_t dev, void *context); static void acpi_res_set_ioport(device_t dev, void *context, uint64_t base, uint64_t length); static void acpi_res_set_iorange(device_t dev, void *context, uint64_t low, uint64_t high, uint64_t length, uint64_t align); static void acpi_res_set_memory(device_t dev, void *context, uint64_t base, uint64_t length); static void acpi_res_set_memoryrange(device_t dev, void *context, uint64_t low, uint64_t high, uint64_t length, uint64_t align); static void acpi_res_set_irq(device_t dev, void *context, uint8_t *irq, int count, int trig, int pol); static void acpi_res_set_ext_irq(device_t dev, void *context, uint32_t *irq, int count, int trig, int pol); static void acpi_res_set_drq(device_t dev, void *context, uint8_t *drq, int count); static void acpi_res_set_start_dependent(device_t dev, void *context, int preference); static void acpi_res_set_end_dependent(device_t dev, void *context); struct acpi_parse_resource_set acpi_res_parse_set = { acpi_res_set_init, acpi_res_set_done, acpi_res_set_ioport, acpi_res_set_iorange, acpi_res_set_memory, acpi_res_set_memoryrange, acpi_res_set_irq, acpi_res_set_ext_irq, acpi_res_set_drq, acpi_res_set_start_dependent, acpi_res_set_end_dependent }; struct acpi_res_context { int ar_nio; int ar_nmem; int ar_nirq; int ar_ndrq; void *ar_parent; }; static void acpi_res_set_init(device_t dev, void *arg, void **context) { struct acpi_res_context *cp; if ((cp = AcpiOsAllocate(sizeof(*cp))) != NULL) { bzero(cp, sizeof(*cp)); cp->ar_parent = arg; *context = cp; } } static void acpi_res_set_done(device_t dev, void *context) { struct acpi_res_context *cp = (struct acpi_res_context *)context; if (cp == NULL) return; AcpiOsFree(cp); } static void acpi_res_set_ioport(device_t dev, void *context, uint64_t base, uint64_t length) { struct acpi_res_context *cp = (struct acpi_res_context *)context; if (cp == NULL) return; bus_set_resource(dev, SYS_RES_IOPORT, cp->ar_nio++, base, length); } static void acpi_res_set_iorange(device_t dev, void *context, uint64_t low, uint64_t high, uint64_t length, uint64_t align) { struct acpi_res_context *cp = (struct acpi_res_context *)context; if (cp == NULL) return; /* * XXX: Some BIOSes contain buggy _CRS entries where fixed I/O * ranges have the maximum base address (_MAX) to the end of the * I/O range instead of the start. These are then treated as a * relocatable I/O range rather than a fixed I/O resource. As a * workaround, treat I/O resources encoded this way as fixed I/O * ports. */ if (high == (low + length)) { if (bootverbose) device_printf(dev, "_CRS has fixed I/O port range defined as relocatable\n"); bus_set_resource(dev, SYS_RES_IOPORT, cp->ar_nio++, low, length); return; } device_printf(dev, "I/O range not supported\n"); } static void acpi_res_set_memory(device_t dev, void *context, uint64_t base, uint64_t length) { struct acpi_res_context *cp = (struct acpi_res_context *)context; if (cp == NULL) return; while (bus_get_resource_start(dev, SYS_RES_MEMORY, cp->ar_nmem)) cp->ar_nmem++; bus_set_resource(dev, SYS_RES_MEMORY, cp->ar_nmem++, base, length); } static void acpi_res_set_memoryrange(device_t dev, void *context, uint64_t low, uint64_t high, uint64_t length, uint64_t align) { struct acpi_res_context *cp = (struct acpi_res_context *)context; if (cp == NULL) return; device_printf(dev, "memory range not supported\n"); } static void acpi_res_set_irq(device_t dev, void *context, uint8_t *irq, int count, int trig, int pol) { struct acpi_res_context *cp = (struct acpi_res_context *)context; rman_res_t intr; if (cp == NULL || irq == NULL) return; /* This implements no resource relocation. */ if (count != 1) return; -#ifdef INTRNG - intr = ACPI_BUS_MAP_INTR(device_get_parent(dev), dev, *irq, - (trig == ACPI_EDGE_SENSITIVE) ? INTR_TRIGGER_EDGE : INTR_TRIGGER_LEVEL, - (pol == ACPI_ACTIVE_HIGH) ? INTR_POLARITY_HIGH : INTR_POLARITY_LOW); -#else intr = *irq; -#endif bus_set_resource(dev, SYS_RES_IRQ, cp->ar_nirq++, intr, 1); } static void acpi_res_set_ext_irq(device_t dev, void *context, uint32_t *irq, int count, int trig, int pol) { struct acpi_res_context *cp = (struct acpi_res_context *)context; rman_res_t intr; if (cp == NULL || irq == NULL) return; /* This implements no resource relocation. */ if (count != 1) return; -#ifdef INTRNG - intr = ACPI_BUS_MAP_INTR(device_get_parent(dev), dev, *irq, - (trig == ACPI_EDGE_SENSITIVE) ? INTR_TRIGGER_EDGE : INTR_TRIGGER_LEVEL, - (pol == ACPI_ACTIVE_HIGH) ? INTR_POLARITY_HIGH : INTR_POLARITY_LOW); -#else intr = *irq; -#endif bus_set_resource(dev, SYS_RES_IRQ, cp->ar_nirq++, intr, 1); } static void acpi_res_set_drq(device_t dev, void *context, uint8_t *drq, int count) { struct acpi_res_context *cp = (struct acpi_res_context *)context; if (cp == NULL || drq == NULL) return; /* This implements no resource relocation. */ if (count != 1) return; bus_set_resource(dev, SYS_RES_DRQ, cp->ar_ndrq++, *drq, 1); } static void acpi_res_set_start_dependent(device_t dev, void *context, int preference) { struct acpi_res_context *cp = (struct acpi_res_context *)context; if (cp == NULL) return; device_printf(dev, "dependent functions not supported\n"); } static void acpi_res_set_end_dependent(device_t dev, void *context) { struct acpi_res_context *cp = (struct acpi_res_context *)context; if (cp == NULL) return; device_printf(dev, "dependent functions not supported\n"); } /* * Resource-owning placeholders for IO and memory pseudo-devices. * * This code allocates system resources that will be used by ACPI * child devices. The acpi parent manages these resources through a * private rman. */ static int acpi_sysres_rid = 100; static int acpi_sysres_probe(device_t dev); static int acpi_sysres_attach(device_t dev); static device_method_t acpi_sysres_methods[] = { /* Device interface */ DEVMETHOD(device_probe, acpi_sysres_probe), DEVMETHOD(device_attach, acpi_sysres_attach), DEVMETHOD_END }; static driver_t acpi_sysres_driver = { "acpi_sysresource", acpi_sysres_methods, 0, }; static devclass_t acpi_sysres_devclass; DRIVER_MODULE(acpi_sysresource, acpi, acpi_sysres_driver, acpi_sysres_devclass, 0, 0); MODULE_DEPEND(acpi_sysresource, acpi, 1, 1, 1); static int acpi_sysres_probe(device_t dev) { static char *sysres_ids[] = { "PNP0C01", "PNP0C02", NULL }; int rv; if (acpi_disabled("sysresource")) return (ENXIO); rv = ACPI_ID_PROBE(device_get_parent(dev), dev, sysres_ids, NULL); if (rv > 0){ return (rv); } device_set_desc(dev, "System Resource"); device_quiet(dev); return (rv); } static int acpi_sysres_attach(device_t dev) { device_t bus; struct resource_list_entry *bus_rle, *dev_rle; struct resource_list *bus_rl, *dev_rl; int done, type; rman_res_t start, end, count; /* * Loop through all current resources to see if the new one overlaps * any existing ones. If so, grow the old one up and/or down * accordingly. Discard any that are wholly contained in the old. If * the resource is unique, add it to the parent. It will later go into * the rman pool. */ bus = device_get_parent(dev); dev_rl = BUS_GET_RESOURCE_LIST(bus, dev); bus_rl = BUS_GET_RESOURCE_LIST(device_get_parent(bus), bus); STAILQ_FOREACH(dev_rle, dev_rl, link) { if (dev_rle->type != SYS_RES_IOPORT && dev_rle->type != SYS_RES_MEMORY) continue; start = dev_rle->start; end = dev_rle->end; count = dev_rle->count; type = dev_rle->type; done = FALSE; STAILQ_FOREACH(bus_rle, bus_rl, link) { if (bus_rle->type != type) continue; /* New resource wholly contained in old, discard. */ if (start >= bus_rle->start && end <= bus_rle->end) break; /* New tail overlaps old head, grow existing resource downward. */ if (start < bus_rle->start && end >= bus_rle->start) { bus_rle->count += bus_rle->start - start; bus_rle->start = start; done = TRUE; } /* New head overlaps old tail, grow existing resource upward. */ if (start <= bus_rle->end && end > bus_rle->end) { bus_rle->count += end - bus_rle->end; bus_rle->end = end; done = TRUE; } /* If we adjusted the old resource, we're finished. */ if (done) break; } /* If we didn't merge with anything, add this resource. */ if (bus_rle == NULL) bus_set_resource(bus, type, acpi_sysres_rid++, start, count); } /* After merging/moving resources to the parent, free the list. */ resource_list_free(dev_rl); return (0); } Index: head/sys/dev/acpica/acpivar.h =================================================================== --- head/sys/dev/acpica/acpivar.h (revision 340597) +++ head/sys/dev/acpica/acpivar.h (revision 340598) @@ -1,536 +1,539 @@ /*- * Copyright (c) 2000 Mitsuru IWASAKI * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _ACPIVAR_H_ #define _ACPIVAR_H_ #ifdef _KERNEL #include "acpi_if.h" #include "bus_if.h" #include #ifdef INTRNG #include #endif #include #include #include #include #include #include #include #include struct apm_clone_data; struct acpi_softc { device_t acpi_dev; struct cdev *acpi_dev_t; int acpi_enabled; int acpi_sstate; int acpi_sleep_disabled; int acpi_resources_reserved; struct sysctl_ctx_list acpi_sysctl_ctx; struct sysctl_oid *acpi_sysctl_tree; int acpi_power_button_sx; int acpi_sleep_button_sx; int acpi_lid_switch_sx; int acpi_standby_sx; int acpi_suspend_sx; int acpi_sleep_delay; int acpi_s4bios; int acpi_do_disable; int acpi_verbose; int acpi_handle_reboot; vm_offset_t acpi_wakeaddr; vm_paddr_t acpi_wakephys; int acpi_next_sstate; /* Next suspend Sx state. */ struct apm_clone_data *acpi_clone; /* Pseudo-dev for devd(8). */ STAILQ_HEAD(,apm_clone_data) apm_cdevs; /* All apm/apmctl/acpi cdevs. */ struct callout susp_force_to; /* Force suspend if no acks. */ }; struct acpi_device { /* ACPI ivars */ ACPI_HANDLE ad_handle; void *ad_private; int ad_flags; int ad_cls_class; /* Resources */ struct resource_list ad_rl; }; #ifdef INTRNG struct intr_map_data_acpi { struct intr_map_data hdr; u_int irq; u_int pol; u_int trig; }; #endif /* Track device (/dev/{apm,apmctl} and /dev/acpi) notification status. */ struct apm_clone_data { STAILQ_ENTRY(apm_clone_data) entries; struct cdev *cdev; int flags; #define ACPI_EVF_NONE 0 /* /dev/apm semantics */ #define ACPI_EVF_DEVD 1 /* /dev/acpi is handled via devd(8) */ #define ACPI_EVF_WRITE 2 /* Device instance is opened writable. */ int notify_status; #define APM_EV_NONE 0 /* Device not yet aware of pending sleep. */ #define APM_EV_NOTIFIED 1 /* Device saw next sleep state. */ #define APM_EV_ACKED 2 /* Device agreed sleep can occur. */ struct acpi_softc *acpi_sc; struct selinfo sel_read; }; #define ACPI_PRW_MAX_POWERRES 8 struct acpi_prw_data { ACPI_HANDLE gpe_handle; int gpe_bit; int lowest_wake; ACPI_OBJECT power_res[ACPI_PRW_MAX_POWERRES]; int power_res_count; }; /* Flags for each device defined in the AML namespace. */ #define ACPI_FLAG_WAKE_ENABLED 0x1 /* Macros for extracting parts of a PCI address from an _ADR value. */ #define ACPI_ADR_PCI_SLOT(adr) (((adr) & 0xffff0000) >> 16) #define ACPI_ADR_PCI_FUNC(adr) ((adr) & 0xffff) /* * Entry points to ACPI from above are global functions defined in this * file, sysctls, and I/O on the control device. Entry points from below * are interrupts (the SCI), notifies, task queue threads, and the thermal * zone polling thread. * * ACPI tables and global shared data are protected by a global lock * (acpi_mutex). * * Each ACPI device can have its own driver-specific mutex for protecting * shared access to local data. The ACPI_LOCK macros handle mutexes. * * Drivers that need to serialize access to functions (e.g., to route * interrupts, get/set control paths, etc.) should use the sx lock macros * (ACPI_SERIAL). * * ACPI-CA handles its own locking and should not be called with locks held. * * The most complicated path is: * GPE -> EC runs _Qxx -> _Qxx reads EC space -> GPE */ extern struct mtx acpi_mutex; #define ACPI_LOCK(sys) mtx_lock(&sys##_mutex) #define ACPI_UNLOCK(sys) mtx_unlock(&sys##_mutex) #define ACPI_LOCK_ASSERT(sys) mtx_assert(&sys##_mutex, MA_OWNED); #define ACPI_LOCK_DECL(sys, name) \ static struct mtx sys##_mutex; \ MTX_SYSINIT(sys##_mutex, &sys##_mutex, name, MTX_DEF) #define ACPI_SERIAL_BEGIN(sys) sx_xlock(&sys##_sxlock) #define ACPI_SERIAL_END(sys) sx_xunlock(&sys##_sxlock) #define ACPI_SERIAL_ASSERT(sys) sx_assert(&sys##_sxlock, SX_XLOCKED); #define ACPI_SERIAL_DECL(sys, name) \ static struct sx sys##_sxlock; \ SX_SYSINIT(sys##_sxlock, &sys##_sxlock, name) /* * ACPI CA does not define layers for non-ACPI CA drivers. * We define some here within the range provided. */ #define ACPI_AC_ADAPTER 0x00010000 #define ACPI_BATTERY 0x00020000 #define ACPI_BUS 0x00040000 #define ACPI_BUTTON 0x00080000 #define ACPI_EC 0x00100000 #define ACPI_FAN 0x00200000 #define ACPI_POWERRES 0x00400000 #define ACPI_PROCESSOR 0x00800000 #define ACPI_THERMAL 0x01000000 #define ACPI_TIMER 0x02000000 #define ACPI_OEM 0x04000000 /* * Constants for different interrupt models used with acpi_SetIntrModel(). */ #define ACPI_INTR_PIC 0 #define ACPI_INTR_APIC 1 #define ACPI_INTR_SAPIC 2 /* * Various features and capabilities for the acpi_get_features() method. * In particular, these are used for the ACPI 3.0 _PDC and _OSC methods. * See the Intel document titled "Intel Processor Vendor-Specific ACPI", * number 302223-007. */ #define ACPI_CAP_PERF_MSRS (1 << 0) /* Intel SpeedStep PERF_CTL MSRs */ #define ACPI_CAP_C1_IO_HALT (1 << 1) /* Intel C1 "IO then halt" sequence */ #define ACPI_CAP_THR_MSRS (1 << 2) /* Intel OnDemand throttling MSRs */ #define ACPI_CAP_SMP_SAME (1 << 3) /* MP C1, Px, and Tx (all the same) */ #define ACPI_CAP_SMP_SAME_C3 (1 << 4) /* MP C2 and C3 (all the same) */ #define ACPI_CAP_SMP_DIFF_PX (1 << 5) /* MP Px (different, using _PSD) */ #define ACPI_CAP_SMP_DIFF_CX (1 << 6) /* MP Cx (different, using _CSD) */ #define ACPI_CAP_SMP_DIFF_TX (1 << 7) /* MP Tx (different, using _TSD) */ #define ACPI_CAP_SMP_C1_NATIVE (1 << 8) /* MP C1 support other than halt */ #define ACPI_CAP_SMP_C3_NATIVE (1 << 9) /* MP C2 and C3 support */ #define ACPI_CAP_PX_HW_COORD (1 << 11) /* Intel P-state HW coordination */ #define ACPI_CAP_INTR_CPPC (1 << 12) /* Native Interrupt Handling for Collaborative Processor Performance Control notifications */ #define ACPI_CAP_HW_DUTY_C (1 << 13) /* Hardware Duty Cycling */ /* * Quirk flags. * * ACPI_Q_BROKEN: Disables all ACPI support. * ACPI_Q_TIMER: Disables support for the ACPI timer. * ACPI_Q_MADT_IRQ0: Specifies that ISA IRQ 0 is wired up to pin 0 of the * first APIC and that the MADT should force that by ignoring the PC-AT * compatible flag and ignoring overrides that redirect IRQ 0 to pin 2. */ extern int acpi_quirks; #define ACPI_Q_OK 0 #define ACPI_Q_BROKEN (1 << 0) #define ACPI_Q_TIMER (1 << 1) #define ACPI_Q_MADT_IRQ0 (1 << 2) /* * Note that the low ivar values are reserved to provide * interface compatibility with ISA drivers which can also * attach to ACPI. */ #define ACPI_IVAR_HANDLE 0x100 #define ACPI_IVAR_UNUSED 0x101 /* Unused/reserved. */ #define ACPI_IVAR_PRIVATE 0x102 #define ACPI_IVAR_FLAGS 0x103 /* * Accessor functions for our ivars. Default value for BUS_READ_IVAR is * (type) 0. The accessor functions don't check return values. */ #define __ACPI_BUS_ACCESSOR(varp, var, ivarp, ivar, type) \ \ static __inline type varp ## _get_ ## var(device_t dev) \ { \ uintptr_t v = 0; \ BUS_READ_IVAR(device_get_parent(dev), dev, \ ivarp ## _IVAR_ ## ivar, &v); \ return ((type) v); \ } \ \ static __inline void varp ## _set_ ## var(device_t dev, type t) \ { \ uintptr_t v = (uintptr_t) t; \ BUS_WRITE_IVAR(device_get_parent(dev), dev, \ ivarp ## _IVAR_ ## ivar, v); \ } __ACPI_BUS_ACCESSOR(acpi, handle, ACPI, HANDLE, ACPI_HANDLE) __ACPI_BUS_ACCESSOR(acpi, private, ACPI, PRIVATE, void *) __ACPI_BUS_ACCESSOR(acpi, flags, ACPI, FLAGS, int) void acpi_fake_objhandler(ACPI_HANDLE h, void *data); static __inline device_t acpi_get_device(ACPI_HANDLE handle) { void *dev = NULL; AcpiGetData(handle, acpi_fake_objhandler, &dev); return ((device_t)dev); } static __inline ACPI_OBJECT_TYPE acpi_get_type(device_t dev) { ACPI_HANDLE h; ACPI_OBJECT_TYPE t; if ((h = acpi_get_handle(dev)) == NULL) return (ACPI_TYPE_NOT_FOUND); if (ACPI_FAILURE(AcpiGetType(h, &t))) return (ACPI_TYPE_NOT_FOUND); return (t); } /* Find the difference between two PM tick counts. */ static __inline uint32_t acpi_TimerDelta(uint32_t end, uint32_t start) { if (end < start && (AcpiGbl_FADT.Flags & ACPI_FADT_32BIT_TIMER) == 0) end |= 0x01000000; return (end - start); } #ifdef ACPI_DEBUGGER void acpi_EnterDebugger(void); #endif #ifdef ACPI_DEBUG #include #define STEP(x) do {printf x, printf("\n"); cngetc();} while (0) #else #define STEP(x) #endif #define ACPI_VPRINT(dev, acpi_sc, x...) do { \ if (acpi_get_verbose(acpi_sc)) \ device_printf(dev, x); \ } while (0) /* Values for the first status word returned by _OSC. */ #define ACPI_OSC_FAILURE (1 << 1) #define ACPI_OSC_BAD_UUID (1 << 2) #define ACPI_OSC_BAD_REVISION (1 << 3) #define ACPI_OSC_CAPS_MASKED (1 << 4) #define ACPI_DEVINFO_PRESENT(x, flags) \ (((x) & (flags)) == (flags)) #define ACPI_DEVICE_PRESENT(x) \ ACPI_DEVINFO_PRESENT(x, ACPI_STA_DEVICE_PRESENT | \ ACPI_STA_DEVICE_FUNCTIONING) #define ACPI_BATTERY_PRESENT(x) \ ACPI_DEVINFO_PRESENT(x, ACPI_STA_DEVICE_PRESENT | \ ACPI_STA_DEVICE_FUNCTIONING | ACPI_STA_BATTERY_PRESENT) /* Callback function type for walking subtables within a table. */ typedef void acpi_subtable_handler(ACPI_SUBTABLE_HEADER *, void *); BOOLEAN acpi_DeviceIsPresent(device_t dev); BOOLEAN acpi_BatteryIsPresent(device_t dev); ACPI_STATUS acpi_GetHandleInScope(ACPI_HANDLE parent, char *path, ACPI_HANDLE *result); ACPI_BUFFER *acpi_AllocBuffer(int size); ACPI_STATUS acpi_ConvertBufferToInteger(ACPI_BUFFER *bufp, UINT32 *number); ACPI_STATUS acpi_GetInteger(ACPI_HANDLE handle, char *path, UINT32 *number); ACPI_STATUS acpi_SetInteger(ACPI_HANDLE handle, char *path, UINT32 number); ACPI_STATUS acpi_ForeachPackageObject(ACPI_OBJECT *obj, void (*func)(ACPI_OBJECT *comp, void *arg), void *arg); ACPI_STATUS acpi_FindIndexedResource(ACPI_BUFFER *buf, int index, ACPI_RESOURCE **resp); ACPI_STATUS acpi_AppendBufferResource(ACPI_BUFFER *buf, ACPI_RESOURCE *res); UINT8 acpi_DSMQuery(ACPI_HANDLE h, uint8_t *uuid, int revision); ACPI_STATUS acpi_EvaluateDSM(ACPI_HANDLE handle, uint8_t *uuid, int revision, uint64_t function, union acpi_object *package, ACPI_BUFFER *out_buf); ACPI_STATUS acpi_EvaluateOSC(ACPI_HANDLE handle, uint8_t *uuid, int revision, int count, uint32_t *caps_in, uint32_t *caps_out, bool query); ACPI_STATUS acpi_OverrideInterruptLevel(UINT32 InterruptNumber); ACPI_STATUS acpi_SetIntrModel(int model); int acpi_ReqSleepState(struct acpi_softc *sc, int state); int acpi_AckSleepState(struct apm_clone_data *clone, int error); ACPI_STATUS acpi_SetSleepState(struct acpi_softc *sc, int state); int acpi_wake_set_enable(device_t dev, int enable); int acpi_parse_prw(ACPI_HANDLE h, struct acpi_prw_data *prw); ACPI_STATUS acpi_Startup(void); void acpi_UserNotify(const char *subsystem, ACPI_HANDLE h, uint8_t notify); int acpi_bus_alloc_gas(device_t dev, int *type, int *rid, ACPI_GENERIC_ADDRESS *gas, struct resource **res, u_int flags); void acpi_walk_subtables(void *first, void *end, acpi_subtable_handler *handler, void *arg); int acpi_MatchHid(ACPI_HANDLE h, const char *hid); #define ACPI_MATCHHID_NOMATCH 0 #define ACPI_MATCHHID_HID 1 #define ACPI_MATCHHID_CID 2 struct acpi_parse_resource_set { void (*set_init)(device_t dev, void *arg, void **context); void (*set_done)(device_t dev, void *context); void (*set_ioport)(device_t dev, void *context, uint64_t base, uint64_t length); void (*set_iorange)(device_t dev, void *context, uint64_t low, uint64_t high, uint64_t length, uint64_t align); void (*set_memory)(device_t dev, void *context, uint64_t base, uint64_t length); void (*set_memoryrange)(device_t dev, void *context, uint64_t low, uint64_t high, uint64_t length, uint64_t align); void (*set_irq)(device_t dev, void *context, uint8_t *irq, int count, int trig, int pol); void (*set_ext_irq)(device_t dev, void *context, uint32_t *irq, int count, int trig, int pol); void (*set_drq)(device_t dev, void *context, uint8_t *drq, int count); void (*set_start_dependent)(device_t dev, void *context, int preference); void (*set_end_dependent)(device_t dev, void *context); }; extern struct acpi_parse_resource_set acpi_res_parse_set; int acpi_identify(void); void acpi_config_intr(device_t dev, ACPI_RESOURCE *res); +#ifdef INTRNG +int acpi_map_intr(device_t dev, u_int irq, ACPI_HANDLE handle); +#endif ACPI_STATUS acpi_lookup_irq_resource(device_t dev, int rid, struct resource *res, ACPI_RESOURCE *acpi_res); ACPI_STATUS acpi_parse_resources(device_t dev, ACPI_HANDLE handle, struct acpi_parse_resource_set *set, void *arg); struct resource *acpi_alloc_sysres(device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags); /* ACPI event handling */ UINT32 acpi_event_power_button_sleep(void *context); UINT32 acpi_event_power_button_wake(void *context); UINT32 acpi_event_sleep_button_sleep(void *context); UINT32 acpi_event_sleep_button_wake(void *context); #define ACPI_EVENT_PRI_FIRST 0 #define ACPI_EVENT_PRI_DEFAULT 10000 #define ACPI_EVENT_PRI_LAST 20000 typedef void (*acpi_event_handler_t)(void *, int); EVENTHANDLER_DECLARE(acpi_sleep_event, acpi_event_handler_t); EVENTHANDLER_DECLARE(acpi_wakeup_event, acpi_event_handler_t); /* Device power control. */ ACPI_STATUS acpi_pwr_wake_enable(ACPI_HANDLE consumer, int enable); ACPI_STATUS acpi_pwr_switch_consumer(ACPI_HANDLE consumer, int state); int acpi_device_pwr_for_sleep(device_t bus, device_t dev, int *dstate); /* APM emulation */ void acpi_apm_init(struct acpi_softc *); /* Misc. */ static __inline struct acpi_softc * acpi_device_get_parent_softc(device_t child) { device_t parent; parent = device_get_parent(child); if (parent == NULL) return (NULL); return (device_get_softc(parent)); } static __inline int acpi_get_verbose(struct acpi_softc *sc) { if (sc) return (sc->acpi_verbose); return (0); } char *acpi_name(ACPI_HANDLE handle); int acpi_avoid(ACPI_HANDLE handle); int acpi_disabled(char *subsys); int acpi_machdep_init(device_t dev); void acpi_install_wakeup_handler(struct acpi_softc *sc); int acpi_sleep_machdep(struct acpi_softc *sc, int state); int acpi_wakeup_machdep(struct acpi_softc *sc, int state, int sleep_result, int intr_enabled); int acpi_table_quirks(int *quirks); int acpi_machdep_quirks(int *quirks); uint32_t hpet_get_uid(device_t dev); /* Battery Abstraction. */ struct acpi_battinfo; int acpi_battery_register(device_t dev); int acpi_battery_remove(device_t dev); int acpi_battery_get_units(void); int acpi_battery_get_info_expire(void); int acpi_battery_bst_valid(struct acpi_bst *bst); int acpi_battery_bif_valid(struct acpi_bif *bif); int acpi_battery_get_battinfo(device_t dev, struct acpi_battinfo *info); /* Embedded controller. */ void acpi_ec_ecdt_probe(device_t); /* AC adapter interface. */ int acpi_acad_get_acline(int *); /* Package manipulation convenience functions. */ #define ACPI_PKG_VALID(pkg, size) \ ((pkg) != NULL && (pkg)->Type == ACPI_TYPE_PACKAGE && \ (pkg)->Package.Count >= (size)) int acpi_PkgInt(ACPI_OBJECT *res, int idx, UINT64 *dst); int acpi_PkgInt32(ACPI_OBJECT *res, int idx, uint32_t *dst); int acpi_PkgStr(ACPI_OBJECT *res, int idx, void *dst, size_t size); int acpi_PkgGas(device_t dev, ACPI_OBJECT *res, int idx, int *type, int *rid, struct resource **dst, u_int flags); int acpi_PkgFFH_IntelCpu(ACPI_OBJECT *res, int idx, int *vendor, int *class, uint64_t *address, int *accsize); ACPI_HANDLE acpi_GetReference(ACPI_HANDLE scope, ACPI_OBJECT *obj); /* * Base level for BUS_ADD_CHILD. Special devices are added at orders less * than this, and normal devices at or above this level. This keeps the * probe order sorted so that things like sysresource are available before * their children need them. */ #define ACPI_DEV_BASE_ORDER 100 /* Default maximum number of tasks to enqueue. */ #ifndef ACPI_MAX_TASKS #define ACPI_MAX_TASKS MAX(32, MAXCPU * 4) #endif /* Default number of task queue threads to start. */ #ifndef ACPI_MAX_THREADS #define ACPI_MAX_THREADS 3 #endif /* Use the device logging level for ktr(4). */ #define KTR_ACPI KTR_DEV SYSCTL_DECL(_debug_acpi); /* * Map a PXM to a VM domain. * * Returns the VM domain ID if found, or -1 if not found / invalid. */ int acpi_map_pxm_to_vm_domainid(int pxm); int acpi_get_cpus(device_t dev, device_t child, enum cpu_sets op, size_t setsize, cpuset_t *cpuset); int acpi_get_domain(device_t dev, device_t child, int *domain); #endif /* _KERNEL */ #endif /* !_ACPIVAR_H_ */