Index: head/share/man/man4/dpt.4 =================================================================== --- head/share/man/man4/dpt.4 (revision 339568) +++ head/share/man/man4/dpt.4 (nonexistent) @@ -1,109 +0,0 @@ -.\" -.\" Copyright (c) 1998 Justin T. Gibbs -.\" All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. The name of the author may not be used to endorse or promote products -.\" derived from this software without specific prior written permission -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -.\" -.\" $FreeBSD$ -.\" -.Dd November 13, 2014 -.Dt DPT 4 -.Os -.Sh NAME -.Nm dpt -.Nd DPT RAID Controller SCSI driver -.Sh SYNOPSIS -To compile this driver into the kernel, -place the following lines in your -kernel configuration file: -.Bd -ragged -offset indent -.Cd "device scbus" -.Cd "device dpt" -.Pp -For one or more PCI cards: -.Cd "device pci" -.Pp -To allow PCI adapters to use memory mapped I/O if enabled: -.Cd options DPT_ALLOW_MEMIO -.Ed -.Pp -Alternatively, to load the driver as a -module at boot time, place the following line in -.Xr loader.conf 5 : -.Bd -literal -offset indent -dpt_load="YES" -.Ed -.Sh DESCRIPTION -The -.Nm -driver supports DPT RAID SCSI controllers. -.Pp -SmartRAID (PM3???) are "Enterprise" class cards, -and SmartCache (PM2???) cards are in the "Workstation" class. -The Gen 4 Smart Cache IV products were a re-issue of the Gen 3 utilizing -upgraded (and cheaper to produce) silicon. -The PM3334 (Smart RAID III) was not revamped as there was no upgraded silicon -(68040 processor) and it was using the best DPT made. -Note there has been customer confusion over the faster enterprise class card -supported by this driver being an older generation. -The Gen5 cards are supported by the -.Xr asr 4 -driver. -.Sh HARDWARE -The -.Nm -driver provides support for the following RAID adapters: -.Pp -.Bl -bullet -compact -.It -DPT Smart Cache Plus -.It -Smart Cache II (PM2?2?, PM2024/PM2124 [PCI]) (Gen2) -.It -Smart RAID II (PM3?2?, PM3021, PM3222) -.It -Smart Cache III (PM2?3?) -.It -Smart RAID III (PM3?3?, PM3334UW [PCI]) (Gen3) -.It -Smart Cache IV (PM2?4?, PM2044/PM2144 [PCI]) (Gen4) -.It -Smart RAID IV -.El -.Sh SEE ALSO -.Xr asr 4 , -.Xr cd 4 , -.Xr ch 4 , -.Xr da 4 , -.Xr sa 4 , -.Xr scsi 4 -.Sh HISTORY -The -.Nm -driver first appeared in -.Fx 2.2.6 . -.Sh AUTHORS -.An -nosplit -The -.Nm -driver was written by -.An Simon Shapiro -and ported to the CAM SCSI system by -.An Justin T. Gibbs . Property changes on: head/share/man/man4/dpt.4 ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/share/man/man4/Makefile =================================================================== --- head/share/man/man4/Makefile (revision 339568) +++ head/share/man/man4/Makefile (revision 339569) @@ -1,1008 +1,1007 @@ # @(#)Makefile 8.1 (Berkeley) 6/18/93 # $FreeBSD$ .include PACKAGE=runtime-manuals MAN= aac.4 \ aacraid.4 \ acpi.4 \ ${_acpi_asus.4} \ ${_acpi_asus_wmi.4} \ ${_acpi_dock.4} \ ${_acpi_fujitsu.4} \ ${_acpi_hp.4} \ ${_acpi_ibm.4} \ ${_acpi_panasonic.4} \ ${_acpi_rapidstart.4} \ ${_acpi_sony.4} \ acpi_thermal.4 \ ${_acpi_toshiba.4} \ acpi_video.4 \ ${_acpi_wmi.4} \ ada.4 \ adm6996fc.4 \ ae.4 \ ${_aesni.4} \ age.4 \ agp.4 \ ahc.4 \ ahci.4 \ ahd.4 \ ${_aibs.4} \ aio.4 \ alc.4 \ ale.4 \ alpm.4 \ altera_atse.4 \ altera_avgen.4 \ altera_jtag_uart.4 \ altera_sdcard.4 \ altq.4 \ amdpm.4 \ ${_amdsbwd.4} \ ${_amdsmb.4} \ ${_amdsmn.4} \ ${_amdtemp.4} \ ${_bxe.4} \ amr.4 \ an.4 \ ${_aout.4} \ ${_apic.4} \ arcmsr.4 \ ${_asmc.4} \ ata.4 \ ath.4 \ ath_ahb.4 \ ath_hal.4 \ ath_pci.4 \ atkbd.4 \ atkbdc.4 \ atp.4 \ ${_atf_test_case.4} \ ${_atrtc.4} \ ${_attimer.4} \ audit.4 \ auditpipe.4 \ aue.4 \ axe.4 \ axge.4 \ bce.4 \ bcma.4 \ bfe.4 \ bge.4 \ ${_bhyve.4} \ bhnd.4 \ bhnd_chipc.4 \ bhnd_pmu.4 \ bhndb.4 \ bhndb_pci.4 \ bktr.4 \ blackhole.4 \ bnxt.4 \ bpf.4 \ bridge.4 \ bt.4 \ bwi.4 \ bwn.4 \ ${_bytgpio.4} \ ${_chvgpio.4} \ capsicum.4 \ cardbus.4 \ carp.4 \ cas.4 \ cc_cdg.4 \ cc_chd.4 \ cc_cubic.4 \ cc_dctcp.4 \ cc_hd.4 \ cc_htcp.4 \ cc_newreno.4 \ cc_vegas.4 \ ${_ccd.4} \ ccr.4 \ cd.4 \ cdce.4 \ cfi.4 \ cfumass.4 \ ch.4 \ chromebook_platform.4 \ ciss.4 \ cloudabi.4 \ cmx.4 \ ${_coretemp.4} \ ${_cpuctl.4} \ cpufreq.4 \ crypto.4 \ ctl.4 \ cue.4 \ cxgb.4 \ cxgbe.4 \ cxgbev.4 \ cy.4 \ cyapa.4 \ da.4 \ dc.4 \ dcons.4 \ dcons_crom.4 \ ddb.4 \ de.4 \ devctl.4 \ disc.4 \ divert.4 \ ${_dpms.4} \ - dpt.4 \ ds1307.4 \ ds3231.4 \ ${_dtrace_provs} \ dummynet.4 \ ed.4 \ edsc.4 \ ehci.4 \ em.4 \ ena.4 \ enc.4 \ epair.4 \ esp.4 \ est.4 \ et.4 \ etherswitch.4 \ eventtimers.4 \ exca.4 \ e6060sw.4 \ fd.4 \ fdc.4 \ fdt.4 \ fdt_pinctrl.4 \ fdtbus.4 \ ffclock.4 \ filemon.4 \ firewire.4 \ full.4 \ fwe.4 \ fwip.4 \ fwohci.4 \ fxp.4 \ gbde.4 \ gdb.4 \ gem.4 \ geom.4 \ geom_fox.4 \ geom_linux_lvm.4 \ geom_map.4 \ geom_uzip.4 \ gif.4 \ gpio.4 \ gpioiic.4 \ gpioled.4 \ gre.4 \ h_ertt.4 \ hifn.4 \ hme.4 \ hpet.4 \ ${_hpt27xx.4} \ ${_hptiop.4} \ ${_hptmv.4} \ ${_hptnr.4} \ ${_hptrr.4} \ ${_hv_kvp.4} \ ${_hv_netvsc.4} \ ${_hv_storvsc.4} \ ${_hv_utils.4} \ ${_hv_vmbus.4} \ ${_hv_vss.4} \ hwpmc.4 \ iavf.4 \ ichsmb.4 \ ${_ichwd.4} \ icmp.4 \ icmp6.4 \ ida.4 \ if_ipsec.4 \ iflib.4 \ ifmib.4 \ ig4.4 \ igmp.4 \ iic.4 \ iicbb.4 \ iicbus.4 \ iicsmb.4 \ iir.4 \ ${_imcsmb.4} \ inet.4 \ inet6.4 \ intpm.4 \ intro.4 \ ${_io.4} \ ${_ioat.4} \ ip.4 \ ip6.4 \ ipfirewall.4 \ ipheth.4 \ ${_ipmi.4} \ ips.4 \ ipsec.4 \ ipw.4 \ ipwfw.4 \ isci.4 \ isl.4 \ ismt.4 \ isp.4 \ ispfw.4 \ iwi.4 \ iwifw.4 \ iwm.4 \ iwmfw.4 \ iwn.4 \ iwnfw.4 \ ixgbe.4 \ ixl.4 \ jedec_dimm.4 \ jme.4 \ kbdmux.4 \ keyboard.4 \ kld.4 \ ksyms.4 \ ksz8995ma.4 \ ktr.4 \ kue.4 \ lagg.4 \ le.4 \ led.4 \ lge.4 \ ${_linux.4} \ liquidio.4 \ lm75.4 \ lo.4 \ lp.4 \ lpbb.4 \ lpt.4 \ mac.4 \ mac_biba.4 \ mac_bsdextended.4 \ mac_ifoff.4 \ mac_lomac.4 \ mac_mls.4 \ mac_none.4 \ mac_partition.4 \ mac_portacl.4 \ mac_seeotheruids.4 \ mac_stub.4 \ mac_test.4 \ malo.4 \ md.4 \ mdio.4 \ me.4 \ mem.4 \ meteor.4 \ mfi.4 \ miibus.4 \ mk48txx.4 \ mld.4 \ mlx.4 \ mlx4en.4 \ mlx5en.4 \ mly.4 \ mmc.4 \ mmcsd.4 \ mn.4 \ mod_cc.4 \ mos.4 \ mouse.4 \ mpr.4 \ mps.4 \ mpt.4 \ mrsas.4 \ msk.4 \ mtio.4 \ multicast.4 \ muge.4 \ mvs.4 \ mwl.4 \ mwlfw.4 \ mxge.4 \ my.4 \ nand.4 \ nandsim.4 \ ncr.4 \ ncv.4 \ ${_ndis.4} \ net80211.4 \ netdump.4 \ netfpga10g_nf10bmac.4 \ netgraph.4 \ netintro.4 \ netmap.4 \ ${_nfe.4} \ ${_nfsmb.4} \ ng_async.4 \ ngatmbase.4 \ ng_atmllc.4 \ ng_bpf.4 \ ng_bridge.4 \ ng_bt3c.4 \ ng_btsocket.4 \ ng_car.4 \ ng_ccatm.4 \ ng_cisco.4 \ ng_deflate.4 \ ng_device.4 \ nge.4 \ ng_echo.4 \ ng_eiface.4 \ ng_etf.4 \ ng_ether.4 \ ng_ether_echo.4 \ ng_frame_relay.4 \ ng_gif.4 \ ng_gif_demux.4 \ ng_h4.4 \ ng_hci.4 \ ng_hole.4 \ ng_hub.4 \ ng_iface.4 \ ng_ipfw.4 \ ng_ip_input.4 \ ng_ksocket.4 \ ng_l2cap.4 \ ng_l2tp.4 \ ng_lmi.4 \ ng_mppc.4 \ ng_nat.4 \ ng_netflow.4 \ ng_one2many.4 \ ng_patch.4 \ ng_ppp.4 \ ng_pppoe.4 \ ng_pptpgre.4 \ ng_pred1.4 \ ng_rfc1490.4 \ ng_socket.4 \ ng_source.4 \ ng_split.4 \ ng_sppp.4 \ ng_sscfu.4 \ ng_sscop.4 \ ng_tag.4 \ ng_tcpmss.4 \ ng_tee.4 \ ng_tty.4 \ ng_ubt.4 \ ng_UI.4 \ ng_uni.4 \ ng_vjc.4 \ ng_vlan.4 \ nmdm.4 \ nsp.4 \ ${_ntb.4} \ ${_ntb_hw_intel.4} \ ${_ntb_hw_plx.4} \ ${_ntb_transport.4} \ ${_nda.4} \ ${_if_ntb.4} \ null.4 \ numa.4 \ ${_nvd.4} \ ${_nvme.4} \ ${_nvram.4} \ ${_nvram2env.4} \ oce.4 \ ocs_fc.4\ ohci.4 \ orm.4 \ ow.4 \ ow_temp.4 \ owc.4 \ ${_padlock.4} \ pass.4 \ pccard.4 \ pccbb.4 \ pcf.4 \ pci.4 \ pcib.4 \ pcic.4 \ pcm.4 \ pcn.4 \ ${_pf.4} \ ${_pflog.4} \ ${_pfsync.4} \ pim.4 \ pms.4 \ polling.4 \ ppbus.4 \ ppc.4 \ ppi.4 \ procdesc.4 \ proto.4 \ psm.4 \ pst.4 \ pt.4 \ pts.4 \ pty.4 \ puc.4 \ ${_qlxge.4} \ ${_qlxgb.4} \ ${_qlxgbe.4} \ ${_qlnxe.4} \ ral.4 \ random.4 \ rc.4 \ rctl.4 \ re.4 \ rgephy.4 \ rights.4 \ rl.4 \ rndtest.4 \ route.4 \ rp.4 \ rtwn.4 \ rtwnfw.4 \ rtwn_pci.4 \ rue.4 \ sa.4 \ safe.4 \ sbp.4 \ sbp_targ.4 \ scc.4 \ sched_4bsd.4 \ sched_ule.4 \ screen.4 \ scsi.4 \ sctp.4 \ sdhci.4 \ sem.4 \ send.4 \ ses.4 \ sf.4 \ ${_sfxge.4} \ sge.4 \ siba.4 \ siftr.4 \ siis.4 \ simplebus.4 \ sio.4 \ sis.4 \ sk.4 \ ${_smartpqi.4} \ smb.4 \ smbus.4 \ smp.4 \ smsc.4 \ sn.4 \ snd_ad1816.4 \ snd_als4000.4 \ snd_atiixp.4 \ snd_cmi.4 \ snd_cs4281.4 \ snd_csa.4 \ snd_ds1.4 \ snd_emu10k1.4 \ snd_emu10kx.4 \ snd_envy24.4 \ snd_envy24ht.4 \ snd_es137x.4 \ snd_ess.4 \ snd_fm801.4 \ snd_gusc.4 \ snd_hda.4 \ snd_hdspe.4 \ snd_ich.4 \ snd_maestro3.4 \ snd_maestro.4 \ snd_mss.4 \ snd_neomagic.4 \ snd_sbc.4 \ snd_solo.4 \ snd_spicds.4 \ snd_t4dwave.4 \ snd_uaudio.4 \ snd_via8233.4 \ snd_via82c686.4 \ snd_vibes.4 \ snp.4 \ spigen.4 \ ${_spkr.4} \ splash.4 \ sppp.4 \ ste.4 \ stf.4 \ stg.4 \ stge.4 \ sym.4 \ syncache.4 \ syncer.4 \ syscons.4 \ sysmouse.4 \ tap.4 \ targ.4 \ tcp.4 \ tdfx.4 \ terasic_mtl.4 \ termios.4 \ textdump.4 \ ti.4 \ timecounters.4 \ tl.4 \ ${_tpm.4} \ trm.4 \ tty.4 \ tun.4 \ twa.4 \ twe.4 \ tws.4 \ tx.4 \ txp.4 \ udp.4 \ udplite.4 \ ure.4 \ vale.4 \ vga.4 \ vge.4 \ viapm.4 \ ${_viawd.4} \ ${_virtio.4} \ ${_virtio_balloon.4} \ ${_virtio_blk.4} \ ${_virtio_console.4} \ ${_virtio_random.4} \ ${_virtio_scsi.4} \ vkbd.4 \ vlan.4 \ vxlan.4 \ ${_vmm.4} \ ${_vmx.4} \ vpo.4 \ vr.4 \ vt.4 \ vte.4 \ ${_vtnet.4} \ watchdog.4 \ wb.4 \ ${_wbwd.4} \ wi.4 \ witness.4 \ wlan.4 \ wlan_acl.4 \ wlan_amrr.4 \ wlan_ccmp.4 \ wlan_tkip.4 \ wlan_wep.4 \ wlan_xauth.4 \ wmt.4 \ ${_wpi.4} \ wsp.4 \ xe.4 \ ${_xen.4} \ xhci.4 \ xl.4 \ ${_xnb.4} \ xpt.4 \ zero.4 MLINKS= ae.4 if_ae.4 MLINKS+=age.4 if_age.4 MLINKS+=agp.4 agpgart.4 MLINKS+=alc.4 if_alc.4 MLINKS+=ale.4 if_ale.4 MLINKS+=altera_atse.4 atse.4 MLINKS+=altera_sdcard.4 altera_sdcardc.4 MLINKS+=altq.4 ALTQ.4 MLINKS+=ath.4 if_ath.4 MLINKS+=ath_pci.4 if_ath_pci.4 MLINKS+=an.4 if_an.4 MLINKS+=aue.4 if_aue.4 MLINKS+=axe.4 if_axe.4 MLINKS+=bce.4 if_bce.4 MLINKS+=bfe.4 if_bfe.4 MLINKS+=bge.4 if_bge.4 MLINKS+=bktr.4 brooktree.4 MLINKS+=bnxt.4 if_bnxt.4 MLINKS+=bridge.4 if_bridge.4 MLINKS+=bwi.4 if_bwi.4 MLINKS+=bwn.4 if_bwn.4 MLINKS+=${_bxe.4} ${_if_bxe.4} MLINKS+=cas.4 if_cas.4 MLINKS+=cdce.4 if_cdce.4 MLINKS+=cfi.4 cfid.4 MLINKS+=cloudabi.4 cloudabi32.4 \ cloudabi.4 cloudabi64.4 MLINKS+=crypto.4 cryptodev.4 MLINKS+=cue.4 if_cue.4 MLINKS+=cxgb.4 if_cxgb.4 MLINKS+=cxgbe.4 if_cxgbe.4 \ cxgbe.4 vcxgbe.4 \ cxgbe.4 if_vcxgbe.4 \ cxgbe.4 cxl.4 \ cxgbe.4 if_cxl.4 \ cxgbe.4 vcxl.4 \ cxgbe.4 if_vcxl.4 \ cxgbe.4 cc.4 \ cxgbe.4 if_cc.4 \ cxgbe.4 vcc.4 \ cxgbe.4 if_vcc.4 MLINKS+=cxgbev.4 if_cxgbev.4 \ cxgbev.4 cxlv.4 \ cxgbev.4 if_cxlv.4 \ cxgbev.4 ccv.4 \ cxgbev.4 if_ccv.4 MLINKS+=dc.4 if_dc.4 MLINKS+=de.4 if_de.4 MLINKS+=disc.4 if_disc.4 MLINKS+=ed.4 if_ed.4 MLINKS+=edsc.4 if_edsc.4 MLINKS+=em.4 if_em.4 MLINKS+=enc.4 if_enc.4 MLINKS+=epair.4 if_epair.4 MLINKS+=et.4 if_et.4 MLINKS+=fd.4 stderr.4 \ fd.4 stdin.4 \ fd.4 stdout.4 MLINKS+=fdt.4 FDT.4 MLINKS+=firewire.4 ieee1394.4 MLINKS+=fwe.4 if_fwe.4 MLINKS+=fwip.4 if_fwip.4 MLINKS+=fxp.4 if_fxp.4 MLINKS+=gem.4 if_gem.4 MLINKS+=geom.4 GEOM.4 MLINKS+=gif.4 if_gif.4 MLINKS+=gpio.4 gpiobus.4 MLINKS+=gre.4 if_gre.4 MLINKS+=hme.4 if_hme.4 MLINKS+=hpet.4 acpi_hpet.4 MLINKS+=${_hptrr.4} ${_rr232x.4} MLINKS+=${_attimer.4} ${_i8254.4} MLINKS+=ip.4 rawip.4 MLINKS+=ipfirewall.4 ipaccounting.4 \ ipfirewall.4 ipacct.4 \ ipfirewall.4 ipfw.4 MLINKS+=ipheth.4 if_ipheth.4 MLINKS+=ipw.4 if_ipw.4 MLINKS+=iwi.4 if_iwi.4 MLINKS+=iwm.4 if_iwm.4 MLINKS+=iwn.4 if_iwn.4 MLINKS+=ixgbe.4 ix.4 MLINKS+=ixgbe.4 if_ix.4 MLINKS+=ixgbe.4 if_ixgbe.4 MLINKS+=ixl.4 if_ixl.4 MLINKS+=iavf.4 if_iavf.4 MLINKS+=jme.4 if_jme.4 MLINKS+=kue.4 if_kue.4 MLINKS+=lagg.4 trunk.4 MLINKS+=lagg.4 if_lagg.4 MLINKS+=le.4 if_le.4 MLINKS+=lge.4 if_lge.4 MLINKS+=lo.4 loop.4 MLINKS+=lp.4 plip.4 MLINKS+=malo.4 if_malo.4 MLINKS+=md.4 vn.4 MLINKS+=mem.4 kmem.4 MLINKS+=mfi.4 mfi_linux.4 \ mfi.4 mfip.4 MLINKS+=mlx5en.4 mce.4 MLINKS+=mn.4 if_mn.4 MLINKS+=mos.4 if_mos.4 MLINKS+=msk.4 if_msk.4 MLINKS+=mwl.4 if_mwl.4 MLINKS+=mxge.4 if_mxge.4 MLINKS+=my.4 if_my.4 MLINKS+=${_ndis.4} ${_if_ndis.4} MLINKS+=netfpga10g_nf10bmac.4 if_nf10bmac.4 MLINKS+=netintro.4 net.4 \ netintro.4 networking.4 MLINKS+=${_nfe.4} ${_if_nfe.4} MLINKS+=nge.4 if_nge.4 MLINKS+=ow.4 onewire.4 MLINKS+=pccbb.4 cbb.4 MLINKS+=pcm.4 snd.4 \ pcm.4 sound.4 MLINKS+=pcn.4 if_pcn.4 MLINKS+=pms.4 pmspcv.4 MLINKS+=ral.4 if_ral.4 MLINKS+=re.4 if_re.4 MLINKS+=rl.4 if_rl.4 MLINKS+=rtwn_pci.4 if_rtwn_pci.4 MLINKS+=rue.4 if_rue.4 MLINKS+=scsi.4 CAM.4 \ scsi.4 cam.4 \ scsi.4 scbus.4 \ scsi.4 SCSI.4 MLINKS+=sf.4 if_sf.4 MLINKS+=sge.4 if_sge.4 MLINKS+=sis.4 if_sis.4 MLINKS+=sk.4 if_sk.4 MLINKS+=smp.4 SMP.4 MLINKS+=smsc.4 if_smsc.4 MLINKS+=sn.4 if_sn.4 MLINKS+=snd_envy24.4 snd_ak452x.4 MLINKS+=snd_sbc.4 snd_sb16.4 \ snd_sbc.4 snd_sb8.4 MLINKS+=${_spkr.4} ${_speaker.4} MLINKS+=splash.4 screensaver.4 MLINKS+=ste.4 if_ste.4 MLINKS+=stf.4 if_stf.4 MLINKS+=stge.4 if_stge.4 MLINKS+=syncache.4 syncookies.4 MLINKS+=syscons.4 sc.4 MLINKS+=tap.4 if_tap.4 MLINKS+=tdfx.4 tdfx_linux.4 MLINKS+=ti.4 if_ti.4 MLINKS+=tl.4 if_tl.4 MLINKS+=tun.4 if_tun.4 MLINKS+=tx.4 if_tx.4 MLINKS+=txp.4 if_txp.4 MLINKS+=ure.4 if_ure.4 MLINKS+=vge.4 if_vge.4 MLINKS+=vlan.4 if_vlan.4 MLINKS+=vxlan.4 if_vxlan.4 MLINKS+=${_vmx.4} ${_if_vmx.4} MLINKS+=vpo.4 imm.4 MLINKS+=vr.4 if_vr.4 MLINKS+=vte.4 if_vte.4 MLINKS+=${_vtnet.4} ${_if_vtnet.4} MLINKS+=watchdog.4 SW_WATCHDOG.4 MLINKS+=wb.4 if_wb.4 MLINKS+=wi.4 if_wi.4 MLINKS+=${_wpi.4} ${_if_wpi.4} MLINKS+=xe.4 if_xe.4 MLINKS+=xl.4 if_xl.4 .if ${MACHINE_CPUARCH} == "amd64" || ${MACHINE_CPUARCH} == "i386" _acpi_asus.4= acpi_asus.4 _acpi_asus_wmi.4= acpi_asus_wmi.4 _acpi_dock.4= acpi_dock.4 _acpi_fujitsu.4=acpi_fujitsu.4 _acpi_hp.4= acpi_hp.4 _acpi_ibm.4= acpi_ibm.4 _acpi_panasonic.4=acpi_panasonic.4 _acpi_rapidstart.4=acpi_rapidstart.4 _acpi_sony.4= acpi_sony.4 _acpi_toshiba.4=acpi_toshiba.4 _acpi_wmi.4= acpi_wmi.4 _aesni.4= aesni.4 _aout.4= aout.4 _apic.4= apic.4 _atrtc.4= atrtc.4 _attimer.4= attimer.4 _aibs.4= aibs.4 _amdsbwd.4= amdsbwd.4 _amdsmb.4= amdsmb.4 _amdsmn.4= amdsmn.4 _amdtemp.4= amdtemp.4 _asmc.4= asmc.4 _bxe.4= bxe.4 _bytgpio.4= bytgpio.4 _chvgpio.4= chvgpio.4 _coretemp.4= coretemp.4 _cpuctl.4= cpuctl.4 _dpms.4= dpms.4 _hpt27xx.4= hpt27xx.4 _hptiop.4= hptiop.4 _hptmv.4= hptmv.4 _hptnr.4= hptnr.4 _hptrr.4= hptrr.4 _hv_kvp.4= hv_kvp.4 _hv_netvsc.4= hv_netvsc.4 _hv_storvsc.4= hv_storvsc.4 _hv_utils.4= hv_utils.4 _hv_vmbus.4= hv_vmbus.4 _hv_vss.4= hv_vss.4 _i8254.4= i8254.4 _ichwd.4= ichwd.4 _if_bxe.4= if_bxe.4 _if_ndis.4= if_ndis.4 _if_nfe.4= if_nfe.4 _if_urtw.4= if_urtw.4 _if_vmx.4= if_vmx.4 _if_vtnet.4= if_vtnet.4 _if_wpi.4= if_wpi.4 _imcsmb.4= imcsmb.4 _ipmi.4= ipmi.4 _io.4= io.4 _linux.4= linux.4 _nda.4= nda.4 _ndis.4= ndis.4 _nfe.4= nfe.4 _nfsmb.4= nfsmb.4 _nvd.4= nvd.4 _nvme.4= nvme.4 _nvram.4= nvram.4 _virtio.4= virtio.4 _virtio_balloon.4=virtio_balloon.4 _virtio_blk.4= virtio_blk.4 _virtio_console.4=virtio_console.4 _virtio_random.4= virtio_random.4 _virtio_scsi.4= virtio_scsi.4 _vmx.4= vmx.4 _vtnet.4= vtnet.4 _padlock.4= padlock.4 _rr232x.4= rr232x.4 _speaker.4= speaker.4 _spkr.4= spkr.4 _tpm.4= tpm.4 _urtw.4= urtw.4 _viawd.4= viawd.4 _wbwd.4= wbwd.4 _wpi.4= wpi.4 _xen.4= xen.4 _xnb.4= xnb.4 .endif .if ${MACHINE_CPUARCH} == "amd64" _if_ntb.4= if_ntb.4 _ioat.4= ioat.4 _ntb.4= ntb.4 _ntb_hw_intel.4= ntb_hw_intel.4 _ntb_hw_plx.4= ntb_hw_plx.4 _ntb_transport.4=ntb_transport.4 _qlxge.4= qlxge.4 _qlxgb.4= qlxgb.4 _qlxgbe.4= qlxgbe.4 _qlnxe.4= qlnxe.4 _sfxge.4= sfxge.4 _smartpqi.4= smartpqi.4 MLINKS+=qlxge.4 if_qlxge.4 MLINKS+=qlxgb.4 if_qlxgb.4 MLINKS+=qlxgbe.4 if_qlxgbe.4 MLINKS+=qlnxe.4 if_qlnxe.4 MLINKS+=sfxge.4 if_sfxge.4 .if ${MK_BHYVE} != "no" _bhyve.4= bhyve.4 _vmm.4= vmm.4 .endif .endif .if ${MACHINE_CPUARCH} == "mips" _nvram2env.4= nvram2env.4 .endif .if ${MACHINE_CPUARCH} == "powerpc" _nvd.4= nvd.4 _nvme.4= nvme.4 .endif .if empty(MAN_ARCH) __arches= ${MACHINE} ${MACHINE_ARCH} ${MACHINE_CPUARCH} .elif ${MAN_ARCH} == "all" __arches= ${:!/bin/sh -c "/bin/ls -d ${.CURDIR}/man4.*"!:E} .else __arches= ${MAN_ARCH} .endif .for __arch in ${__arches:O:u} .if exists(${.CURDIR}/man4.${__arch}) SUBDIR+= man4.${__arch} .endif .endfor .if ${MK_BLUETOOTH} != "no" MAN+= ng_bluetooth.4 .endif .if ${MK_CCD} != "no" _ccd.4= ccd.4 .endif .if ${MK_CDDL} != "no" _dtrace_provs= dtrace_io.4 \ dtrace_ip.4 \ dtrace_lockstat.4 \ dtrace_proc.4 \ dtrace_sched.4 \ dtrace_sctp.4 \ dtrace_tcp.4 \ dtrace_udp.4 \ dtrace_udplite.4 .endif .if ${MK_EFI} != "no" MAN+= efidev.4 MLINKS+= efidev.4 efirtc.4 .endif .if ${MK_ISCSI} != "no" MAN+= cfiscsi.4 MAN+= iscsi.4 MAN+= iscsi_initiator.4 MAN+= iser.4 .endif .if ${MK_OFED} != "no" MAN+= mlx4ib.4 MAN+= mlx5ib.4 .endif .if ${MK_MLX5TOOL} != "no" MAN+= mlx5io.4 .endif .if ${MK_TESTS} != "no" ATF= ${SRCTOP}/contrib/atf .PATH: ${ATF}/doc _atf_test_case.4= atf-test-case.4 .endif .if ${MK_PF} != "no" _pf.4= pf.4 _pflog.4= pflog.4 _pfsync.4= pfsync.4 .endif .if ${MK_USB} != "no" MAN+= \ otus.4 \ otusfw.4 \ rsu.4 \ rsufw.4 \ rtwn_usb.4 \ rum.4 \ run.4 \ runfw.4 \ u3g.4 \ uark.4 \ uart.4 \ uath.4 \ ubsa.4 \ ubsec.4 \ ubser.4 \ ubtbcmfw.4 \ uchcom.4 \ ucom.4 \ ucycom.4 \ udav.4 \ udbp.4 \ udl.4 \ uep.4 \ ufm.4 \ ufoma.4 \ uftdi.4 \ ugen.4 \ ugold.4 \ uhci.4 \ uhid.4 \ uhso.4 \ uipaq.4 \ ukbd.4 \ uled.4 \ ulpt.4 \ umass.4 \ umcs.4 \ umct.4 \ umodem.4 \ umoscom.4 \ ums.4 \ unix.4 \ upgt.4 \ uplcom.4 \ ural.4 \ urio.4 \ urndis.4 \ ${_urtw.4} \ usb.4 \ usb_quirk.4 \ usb_template.4 \ usfs.4 \ uslcom.4 \ uvisor.4 \ uvscom.4 \ zyd.4 MLINKS+=otus.4 if_otus.4 MLINKS+=rsu.4 if_rsu.4 MLINKS+=rtwn_usb.4 if_rtwn_usb.4 MLINKS+=rum.4 if_rum.4 MLINKS+=run.4 if_run.4 MLINKS+=u3g.4 u3gstub.4 MLINKS+=uath.4 if_uath.4 MLINKS+=udav.4 if_udav.4 MLINKS+=upgt.4 if_upgt.4 MLINKS+=ural.4 if_ural.4 MLINKS+=urndis.4 if_urndis.4 MLINKS+=${_urtw.4} ${_if_urtw.4} MLINKS+=zyd.4 if_zyd.4 .endif .include Index: head/sys/amd64/conf/GENERIC =================================================================== --- head/sys/amd64/conf/GENERIC (revision 339568) +++ head/sys/amd64/conf/GENERIC (revision 339569) @@ -1,373 +1,372 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/amd64 # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu HAMMER ident GENERIC makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support options SCHED_ULE # ULE scheduler options NUMA # Non-Uniform Memory Architecture support options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET options INET # InterNETworking options INET6 # IPv6 communications protocols options IPSEC # IP (v4/v6) security options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 options TCP_OFFLOAD # TCP offload options TCP_BLACKBOX # Enhanced TCP event logging options TCP_HHOOK # hhook(9) framework for TCP options TCP_RFC7413 # TCP Fast Open options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_RAID # Soft RAID functionality. options GEOM_LABEL # Provides labelization options EFIRT # EFI Runtime Services support options COMPAT_FREEBSD32 # Compatible with i386 binaries options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options COMPAT_FREEBSD9 # Compatible with FreeBSD9 options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options COMPAT_FREEBSD11 # Compatible with FreeBSD11 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options CAPABILITY_MODE # Capsicum capability mode options CAPABILITIES # Capsicum capabilities options MAC # TrustedBSD MAC Framework options KDTRACE_FRAME # Ensure frames are compiled in options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # Kernel ELF linker loads CTF data options INCLUDE_CONFIG_FILE # Include this file in kernel options RACCT # Resource accounting framework options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default options RCTL # Resource limits # Debugging support. Always need this: options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): options BUF_TRACKING # Track buffer history options DDB # Support DDB. options FULL_BUF_TRACKING # Track more buffer history options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # Kernel dump features. options EKCD # Support for encrypted kernel dumps options GZIO # gzip-compressed kernel and user dumps options ZSTDIO # zstd-compressed kernel and user dumps options NETDUMP # netdump(4) client support # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel options EARLY_AP_STARTUP # CPU frequency control device cpufreq # Bus support. device acpi options ACPI_DMAR device pci options PCI_HP # PCI-Express native HotPlug options PCI_IOV # PCI SR-IOV support # Floppy drives device fdc # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device esp # AMD Am53C974 (Tekram DC-390(T)) device hptiop # Highpoint RocketRaid 3xxx series device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module device mpt # LSI-Logic MPT-Fusion device mps # LSI-Logic MPT-Fusion 2 device mpr # LSI-Logic MPT-Fusion 3 #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device isci # Intel C600 SAS controller device ocs_fc # Emulex FC adapters # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # RAID controllers interfaced to the SCSI subsystem device amr # AMI MegaRAID device arcmsr # Areca SATA II RAID device ciss # Compaq Smart RAID 5* -device dpt # DPT Smartcache III, IV - See NOTES for options device hptmv # Highpoint RocketRAID 182x device hptnr # Highpoint DC7280, R750 device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx device hpt27xx # Highpoint RocketRAID 27xx device iir # Intel Integrated RAID device ips # IBM (Adaptec) ServeRAID device mly # Mylex AcceleRAID/eXtremeRAID device twa # 3ware 9000 series PATA/SATA RAID device smartpqi # Microsemi smartpqi driver device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device aacraid # Adaptec by PMC RAID device ida # Compaq Smart RAID device mfi # LSI MegaRAID SAS device mlx # Mylex DAC960 family device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s device pmspcv # PMC-Sierra SAS/SATA Controller driver #XXX pointer/int warnings #device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # NVM Express (NVMe) support device nvme # base NVMe driver device nvd # expose NVMe namespaces as disks, depends on nvme # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver options VESA # Add support for VESA BIOS Extensions (VBE) device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc options SC_PIXEL_MODE # add support for the raster text mode # vt is the new video console driver device vt device vt_vga device vt_efifb device agp # support several AGP chipsets # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device #device vpo # Requires scbus and da device puc # Multi I/O cards and multi-channel UARTs # PCI Ethernet NICs. device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 Gigabit Ethernet Family device ix # Intel PRO/10GbE PCIE PF Ethernet device ixv # Intel PRO/10GbE PCIE VF Ethernet device ixl # Intel 700 Series Physical Function device iavf # Intel Adaptive Virtual Function device le # AMD Am7900 LANCE and Am79C9xx PCnet device ti # Alteon Networks Tigon I/II gigabit Ethernet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) device gem # Sun GEM/Sun ERI/Apple GMAC device hme # Sun HME (Happy Meal Ethernet) device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device nfe # nVidia nForce MCP on-board Ethernet device nge # NatSemi DP83820 gigabit Ethernet device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sge # Silicon Integrated Systems SiS190/191 device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit Ethernet device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG # enable debug msgs options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's options IEEE80211_SUPPORT_MESH # enable 802.11s draft support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device an # Aironet 4500/4800 802.11 wireless NICs. device ath # Atheros NICs device ath_pci # Atheros pci/cardbus glue device ath_hal # pci/cardbus chip support options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later device ath_rate_sample # SampleRate tx rate control for ath #device bwi # Broadcom BCM430x/BCM431x wireless NICs. #device bwn # Broadcom BCM43xx wireless NICs. device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. device malo # Marvell Libertas wireless NICs. device mwl # Marvell 88W8363 802.11n wireless NICs. device ral # Ralink Technology RT2500 wireless NICs. device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. device wpi # Intel 3945ABG wireless NICs. # Pseudo devices. device crypto # core crypto support device loop # Network loopback device random # Entropy device device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device ether # Ethernet support device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device xhci # XHCI PCI->USB interface (USB 3.0) device usb # USB Bus (required) device ukbd # Keyboard device umass # Disks/Mass storage - Requires scbus and da # Sound support device sound # Generic sound driver (required) device snd_cmi # CMedia CMI8338/CMI8738 device snd_csa # Crystal Semiconductor CS461x/428x device snd_emu10kx # Creative SoundBlaster Live! and Audigy device snd_es137x # Ensoniq AudioPCI ES137x device snd_hda # Intel High Definition Audio device snd_ich # Intel, NVidia and other ICH AC'97 Audio device snd_via8233 # VIA VT8233x Audio # MMC/SD device mmc # MMC/SD bus device mmcsd # MMC/SD memory card device sdhci # Generic PCI SD Host Controller # VirtIO support device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI device device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device # HyperV drivers and enhancement support device hyperv # HyperV drivers # Xen HVM Guest Optimizations # NOTE: XENHVM depends on xenpci. They must be added or removed together. options XENHVM # Xen HVM kernel infrastructure device xenpci # Xen HVM Hypervisor services driver # VMware support device vmx # VMware VMXNET3 Ethernet # Netmap provides direct access to TX/RX rings on supported NICs device netmap # netmap(4) support Index: head/sys/conf/NOTES =================================================================== --- head/sys/conf/NOTES (revision 339568) +++ head/sys/conf/NOTES (revision 339569) @@ -1,3042 +1,3021 @@ # $FreeBSD$ # # NOTES -- Lines that can be cut/pasted into kernel and hints configs. # # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', # 'makeoptions', 'hints', etc. go into the kernel configuration that you # run config(8) with. # # Lines that begin with 'hint.' are NOT for config(8), they go into your # hints file. See /boot/device.hints and/or the 'hints' config(8) directive. # # Please use ``make LINT'' to create an old-style LINT file if you want to # do kernel test-builds. # # This file contains machine independent kernel configuration notes. For # machine dependent notes, look in /sys//conf/NOTES. # # # NOTES conventions and style guide: # # Large block comments should begin and end with a line containing only a # comment character. # # To describe a particular object, a block comment (if it exists) should # come first. Next should come device, options, and hints lines in that # order. All device and option lines must be described by a comment that # doesn't just expand the device or option name. Use only a concise # comment on the same line if possible. Very detailed descriptions of # devices and subsystems belong in man pages. # # A space followed by a tab separates 'options' from an option name. Two # spaces followed by a tab separate 'device' from a device name. Comments # after an option or device should use one space after the comment character. # To comment out a negative option that disables code and thus should not be # enabled for LINT builds, precede 'options' with "#!". # # # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident LINT # # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a formula defined in subr_param.c. # Omitting this parameter or setting it to 0 will cause the system to # auto-size based on physical memory. # maxusers 10 # To statically compile in device wiring instead of /boot/device.hints #hints "LINT.hints" # Default places to look for devices. # Use the following to compile in values accessible to the kernel # through getenv() (or kenv(1) in userland). The format of the file # is 'variable=value', see kenv(1) # #env "LINT.env" # # The `makeoptions' parameter allows variables to be passed to the # generated Makefile in the build area. # # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} # after most other flags. Here we use it to inhibit use of non-optimal # gcc built-in functions (e.g., memcmp). # # DEBUG happens to be magic. # The following is equivalent to 'config -g KERNELNAME' and creates # 'kernel.debug' compiled with -g debugging as well as a normal # 'kernel'. Use 'make install.debug' to install the debug kernel # but that isn't normally necessary as the debug symbols are not loaded # by the kernel and are not useful there anyway. # # KERNEL can be overridden so that you can change the default name of your # kernel. # # MODULES_OVERRIDE can be used to limit modules built to a specific list. # makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo" # Only build ext2fs module plus those parts of the sound system I need. #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3" makeoptions DESTDIR=/tmp # # FreeBSD processes are subject to certain limits to their consumption # of system resources. See getrlimit(2) for more details. Each # resource limit has two values, a "soft" limit and a "hard" limit. # The soft limits can be modified during normal system operation, but # the hard limits are set at boot time. Their default values are # in sys//include/vmparam.h. There are two ways to change them: # # 1. Set the values at kernel build time. The options below are one # way to allow that limit to grow to 1GB. They can be increased # further by changing the parameters: # # 2. In /boot/loader.conf, set the tunables kern.maxswzone, # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, # kern.dflssiz, kern.maxssiz and kern.sgrowsiz. # # The options in /boot/loader.conf override anything in the kernel # configuration file. See the function init_param1 in # sys/kern/subr_param.c for more details. # options MAXDSIZ=(1024UL*1024*1024) options MAXSSIZ=(128UL*1024*1024) options DFLDSIZ=(1024UL*1024*1024) # # BLKDEV_IOSIZE sets the default block size used in user block # device I/O. Note that this value will be overridden by the label # when specifying a block device from a label with a non-0 # partition blocksize. The default is PAGE_SIZE. # options BLKDEV_IOSIZE=8192 # # MAXPHYS and DFLTPHYS # # These are the maximal and safe 'raw' I/O block device access sizes. # Reads and writes will be split into MAXPHYS chunks for known good # devices and DFLTPHYS for the rest. Some applications have better # performance with larger raw I/O access sizes. Note that certain VM # parameters are derived from these values and making them too large # can make an unbootable kernel. # # The defaults are 64K and 128K respectively. options DFLTPHYS=(64*1024) options MAXPHYS=(128*1024) # This allows you to actually store this configuration file into # the kernel binary itself. See config(8) for more details. # options INCLUDE_CONFIG_FILE # Include this file in kernel # # Compile-time defaults for various boot parameters # options BOOTVERBOSE=1 options BOOTHOWTO=RB_MULTIPLE # # Compile-time defaults for dmesg boot tagging # # Default boot tag; may use 'kern.boot_tag' loader tunable to override. The # current boot's tag is also exposed via the 'kern.boot_tag' sysctl. options BOOT_TAG=\"---<>---\" # Maximum boot tag size the kernel's static buffer should accomodate. Maximum # size for both BOOT_TAG and the assocated tunable. options BOOT_TAG_SZ=32 options GEOM_BDE # Disk encryption. options GEOM_BSD # BSD disklabels (obsolete, gone in 12) options GEOM_CACHE # Disk cache. options GEOM_CONCAT # Disk concatenation. options GEOM_ELI # Disk encryption. options GEOM_FOX # Redundant path mitigation (obsolete, gone in 12) options GEOM_GATE # Userland services. options GEOM_JOURNAL # Journaling. options GEOM_LABEL # Providers labelization. options GEOM_LINUX_LVM # Linux LVM2 volumes options GEOM_MAP # Map based partitioning options GEOM_MBR # DOS/MBR partitioning (obsolete, gone in 12) options GEOM_MIRROR # Disk mirroring. options GEOM_MULTIPATH # Disk multipath options GEOM_NOP # Test class. options GEOM_PART_APM # Apple partitioning options GEOM_PART_BSD # BSD disklabel options GEOM_PART_BSD64 # BSD disklabel64 options GEOM_PART_EBR # Extended Boot Records options GEOM_PART_EBR_COMPAT # Backward compatible partition names options GEOM_PART_GPT # GPT partitioning options GEOM_PART_LDM # Logical Disk Manager options GEOM_PART_MBR # MBR partitioning options GEOM_PART_VTOC8 # SMI VTOC8 disk label options GEOM_RAID # Soft RAID functionality. options GEOM_RAID3 # RAID3 functionality. options GEOM_SHSEC # Shared secret. options GEOM_STRIPE # Disk striping. options GEOM_SUNLABEL # Sun/Solaris partitioning (obsolete, gone in 12) options GEOM_UZIP # Read-only compressed disks options GEOM_VINUM # Vinum logical volume manager options GEOM_VIRSTOR # Virtual storage. options GEOM_VOL # Volume names from UFS superblock (obsolete, gone in 12) options GEOM_ZERO # Performance testing helper. # # The root device and filesystem type can be compiled in; # this provides a fallback option if the root device cannot # be correctly guessed by the bootstrap code, or an override if # the RB_DFLTROOT flag (-r) is specified when booting the kernel. # options ROOTDEVNAME=\"ufs:da0s2e\" ##################################################################### # Scheduler options: # # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options # select which scheduler is compiled in. # # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run # queue and no CPU affinity which makes it suboptimal for SMP. It has very # good interactivity and priority selection. # # SCHED_ULE provides significant performance advantages over 4BSD on many # workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues # and scheduler locks. It also has a stronger notion of interactivity # which leads to better responsiveness even on uniprocessor machines. This # is the default scheduler. # # SCHED_STATS is a debugging option which keeps some stats in the sysctl # tree at 'kern.sched.stats' and is useful for debugging scheduling decisions. # options SCHED_4BSD options SCHED_STATS #options SCHED_ULE ##################################################################### # SMP OPTIONS: # # SMP enables building of a Symmetric MultiProcessor Kernel. # Mandatory: options SMP # Symmetric MultiProcessor Kernel # EARLY_AP_STARTUP releases the Application Processors earlier in the # kernel startup process (before devices are probed) rather than at the # end. This is a temporary option for use during the transition from # late to early AP startup. options EARLY_AP_STARTUP # MAXCPU defines the maximum number of CPUs that can boot in the system. # A default value should be already present, for every architecture. options MAXCPU=32 # NUMA enables use of Non-Uniform Memory Access policies in various kernel # subsystems. options NUMA # MAXMEMDOM defines the maximum number of memory domains that can boot in the # system. A default value should already be defined by every architecture. options MAXMEMDOM=2 # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin # if the thread that currently owns the mutex is executing on another # CPU. This behavior is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_MUTEXES # ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin # if the thread that currently owns the rwlock is executing on another # CPU. This behavior is enabled by default, so this option can be used # to disable it. options NO_ADAPTIVE_RWLOCKS # ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that # currently owns the sx lock is executing on another CPU. # This behavior is enabled by default, so this option can be used to # disable it. options NO_ADAPTIVE_SX # MUTEX_NOINLINE forces mutex operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options MUTEX_NOINLINE # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options RWLOCK_NOINLINE # SX_NOINLINE forces sx lock operations to call functions to perform each # operation rather than inlining the simple cases. This can be used to # shrink the size of the kernel text segment. Note that this behavior is # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, # and WITNESS options. options SX_NOINLINE # SMP Debugging Options: # # CALLOUT_PROFILING enables rudimentary profiling of the callwheel data # structure used as backend in callout(9). # PREEMPTION allows the threads that are in the kernel to be preempted by # higher priority [interrupt] threads. It helps with interactivity # and allows interrupt threads to run sooner rather than waiting. # WARNING! Only tested on amd64 and i386. # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel # threads. Its sole use is to expose race conditions and other # bugs during development. Enabling this option will reduce # performance and increase the frequency of kernel panics by # design. If you aren't sure that you need it then you don't. # Relies on the PREEMPTION option. DON'T TURN THIS ON. # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table # used to hold active sleep queues as well as sleep wait message # frequency. # TURNSTILE_PROFILING enables rudimentary profiling of the hash table # used to hold active lock queues. # UMTX_PROFILING enables rudimentary profiling of the hash table used # to hold active lock queues. # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_KDB causes the witness code to drop into the kernel debugger if # a lock hierarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. options PREEMPTION options FULL_PREEMPTION options WITNESS options WITNESS_KDB options WITNESS_SKIPSPIN # LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details. options LOCK_PROFILING # Set the number of buffers and the hash size. The hash size MUST be larger # than the number of buffers. Hash size should be prime. options MPROF_BUFFERS="1536" options MPROF_HASH_SIZE="1543" # Profiling for the callout(9) backend. options CALLOUT_PROFILING # Profiling for internal hash tables. options SLEEPQUEUE_PROFILING options TURNSTILE_PROFILING options UMTX_PROFILING ##################################################################### # COMPATIBILITY OPTIONS # # Implement system calls compatible with 4.3BSD and older versions of # FreeBSD. You probably do NOT want to remove this as much current code # still relies on the 4.3 emulation. Note that some architectures that # are supported by FreeBSD do not include support for certain important # aspects of this compatibility option, namely those related to the # signal delivery mechanism. # options COMPAT_43 # Old tty interface. options COMPAT_43TTY # Note that as a general rule, COMPAT_FREEBSD depends on # COMPAT_FREEBSD, COMPAT_FREEBSD, etc. # Enable FreeBSD4 compatibility syscalls options COMPAT_FREEBSD4 # Enable FreeBSD5 compatibility syscalls options COMPAT_FREEBSD5 # Enable FreeBSD6 compatibility syscalls options COMPAT_FREEBSD6 # Enable FreeBSD7 compatibility syscalls options COMPAT_FREEBSD7 # Enable FreeBSD9 compatibility syscalls options COMPAT_FREEBSD9 # Enable FreeBSD10 compatibility syscalls options COMPAT_FREEBSD10 # Enable FreeBSD11 compatibility syscalls options COMPAT_FREEBSD11 # Enable Linux Kernel Programming Interface options COMPAT_LINUXKPI # # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS # # Compile with kernel debugger related code. # options KDB # # Print a stack trace of the current thread on the console for a panic. # options KDB_TRACE # # Don't enter the debugger for a panic. Intended for unattended operation # where you may want to enter the debugger from the console, but still want # the machine to recover from a panic. # options KDB_UNATTENDED # # Enable the ddb debugger backend. # options DDB # # Print the numerical value of symbols in addition to the symbolic # representation. # options DDB_NUMSYM # # Enable the remote gdb debugger backend. # options GDB # # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the # contents of the registered sysctl nodes on the console. It is disabled by # default because it generates excessively verbose console output that can # interfere with serial console operation. # options SYSCTL_DEBUG # # Enable textdump by default, this disables kernel core dumps. # options TEXTDUMP_PREFERRED # # Enable extra debug messages while performing textdumps. # options TEXTDUMP_VERBOSE # # NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the # resulting kernel. options NO_SYSCTL_DESCR # # MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9) # allocations that are smaller than a page. The purpose is to isolate # different malloc types into hash classes, so that any buffer # overruns or use-after-free will usually only affect memory from # malloc types in that hash class. This is purely a debugging tool; # by varying the hash function and tracking which hash class was # corrupted, the intersection of the hash classes from each instance # will point to a single malloc type that is being misused. At this # point inspection or memguard(9) can be used to catch the offending # code. # options MALLOC_DEBUG_MAXZONES=8 # # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator # for the kernel used to detect modify-after-free scenarios. See the # memguard(9) man page for more information on usage. # options DEBUG_MEMGUARD # # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for # malloc(9). # options DEBUG_REDZONE # # EARLY_PRINTF enables support for calling a special printf (eprintf) # very early in the kernel (before cn_init() has been called). This # should only be used for debugging purposes early in boot. Normally, # it is not defined. It is commented out here because this feature # isn't generally available. And the required eputc() isn't defined. # #options EARLY_PRINTF # # KTRACE enables the system-call tracing facility ktrace(2). To be more # SMP-friendly, KTRACE uses a worker thread to process most trace events # asynchronously to the thread generating the event. This requires a # pre-allocated store of objects representing trace events. The # KTRACE_REQUEST_POOL option specifies the initial size of this store. # The size of the pool can be adjusted both at boottime and runtime via # the kern.ktrace_request_pool tunable and sysctl. # options KTRACE #kernel tracing options KTRACE_REQUEST_POOL=101 # # KTR is a kernel tracing facility imported from BSD/OS. It is # enabled with the KTR option. KTR_ENTRIES defines the number of # entries in the circular trace buffer; it may be an arbitrary number. # KTR_BOOT_ENTRIES defines the number of entries during the early boot, # before malloc(9) is functional. # KTR_COMPILE defines the mask of events to compile into the kernel as # defined by the KTR_* constants in . KTR_MASK defines the # initial value of the ktr_mask variable which determines at runtime # what events to trace. KTR_CPUMASK determines which CPU's log # events, with bit X corresponding to CPU X. The layout of the string # passed as KTR_CPUMASK must match a series of bitmasks each of them # separated by the "," character (ie: # KTR_CPUMASK=0xAF,0xFFFFFFFFFFFFFFFF). KTR_VERBOSE enables # dumping of KTR events to the console by default. This functionality # can be toggled via the debug.ktr_verbose sysctl and defaults to off # if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details. # options KTR options KTR_BOOT_ENTRIES=1024 options KTR_ENTRIES=(128*1024) options KTR_COMPILE=(KTR_ALL) options KTR_MASK=KTR_INTR options KTR_CPUMASK=0x3 options KTR_VERBOSE # # ALQ(9) is a facility for the asynchronous queuing of records from the kernel # to a vnode, and is employed by services such as ktr(4) to produce trace # files based on a kernel event stream. Records are written asynchronously # in a worker thread. # options ALQ options KTR_ALQ # # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options INVARIANTS # # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you # wish to build a kernel module with 'INVARIANTS', then adding # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary # infrastructure without the added overhead. # options INVARIANT_SUPPORT # # The KASSERT_PANIC_OPTIONAL option allows kasserts to fire without # necessarily inducing a panic. Panic is the default behavior, but # runtime options can configure it either entirely off, or off with a # limit. # options KASSERT_PANIC_OPTIONAL # # The DIAGNOSTIC option is used to enable extra debugging information # from some parts of the kernel. As this makes everything more noisy, # it is disabled by default. # options DIAGNOSTIC # # REGRESSION causes optional kernel interfaces necessary only for regression # testing to be enabled. These interfaces may constitute security risks # when enabled, as they permit processes to easily modify aspects of the # run-time environment to reproduce unlikely or unusual (possibly normally # impossible) scenarios. # options REGRESSION # # This option lets some drivers co-exist that can't co-exist in a running # system. This is used to be able to compile all kernel code in one go for # quality assurance purposes (like this file, which the option takes it name # from.) # options COMPILING_LINT # # STACK enables the stack(9) facility, allowing the capture of kernel stack # for the purpose of procinfo(1), etc. stack(9) will also be compiled in # automatically if DDB(4) is compiled into the kernel. # options STACK # # The NUM_CORE_FILES option specifies the limit for the number of core # files generated by a particular process, when the core file format # specifier includes the %I pattern. Since we only have 1 character for # the core count in the format string, meaning the range will be 0-9, the # maximum value allowed for this option is 10. # This core file limit can be adjusted at runtime via the debug.ncores # sysctl. # options NUM_CORE_FILES=5 # # The TSLOG option enables timestamped logging of events, especially # function entries/exits, in order to track the time spent by the kernel. # In particular, this is useful when investigating the early boot process, # before it is possible to use more sophisticated tools like DTrace. # The TSLOGSIZE option controls the size of the (preallocated, fixed # length) buffer used for storing these events (default: 262144 records). # # For security reasons the TSLOG option should not be enabled on systems # used in production. # options TSLOG options TSLOGSIZE=262144 ##################################################################### # PERFORMANCE MONITORING OPTIONS # # The hwpmc driver that allows the use of in-CPU performance monitoring # counters for performance monitoring. The base kernel needs to be configured # with the 'options' line, while the hwpmc device can be either compiled # in or loaded as a loadable kernel module. # # Additional configuration options may be required on specific architectures, # please see hwpmc(4). device hwpmc # Driver (also a loadable module) options HWPMC_DEBUG options HWPMC_HOOKS # Other necessary kernel hooks ##################################################################### # NETWORKING OPTIONS # # Protocol families # options INET #Internet communications protocols options INET6 #IPv6 communications protocols options RATELIMIT # TX rate limiting support options ROUTETABLES=2 # allocated fibs up to 65536. default is 1. # but that would be a bad idea as they are large. options TCP_OFFLOAD # TCP offload support. options TCPHPTS # In order to enable IPSEC you MUST also add device crypto to # your kernel configuration options IPSEC #IP security (requires device crypto) # Option IPSEC_SUPPORT does not enable IPsec, but makes it possible to # load it as a kernel module. You still MUST add device crypto to your kernel # configuration. options IPSEC_SUPPORT #options IPSEC_DEBUG #debug for IP security # # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV # options. options NETSMB #SMB/CIFS requester # mchain library. It can be either loaded as KLD or compiled into kernel options LIBMCHAIN # libalias library, performing NAT options LIBALIAS # # SCTP is a NEW transport protocol defined by # RFC2960 updated by RFC3309 and RFC3758.. and # soon to have a new base RFC and many many more # extensions. This release supports all the extensions # including many drafts (most about to become RFC's). # It is the reference implementation of SCTP # and is quite well tested. # # Note YOU MUST have both INET and INET6 defined. # You don't have to enable V6, but SCTP is # dual stacked and so far we have not torn apart # the V6 and V4.. since an association can span # both a V6 and V4 address at the SAME time :-) # options SCTP # There are bunches of options: # this one turns on all sorts of # nastily printing that you can # do. It's all controlled by a # bit mask (settable by socket opt and # by sysctl). Including will not cause # logging until you set the bits.. but it # can be quite verbose.. so without this # option we don't do any of the tests for # bits and prints.. which makes the code run # faster.. if you are not debugging don't use. options SCTP_DEBUG # # All that options after that turn on specific types of # logging. You can monitor CWND growth, flight size # and all sorts of things. Go look at the code and # see. I have used this to produce interesting # charts and graphs as well :-> # # I have not yet committed the tools to get and print # the logs, I will do that eventually .. before then # if you want them send me an email rrs@freebsd.org # You basically must have ktr(4) enabled for these # and you then set the sysctl to turn on/off various # logging bits. Use ktrdump(8) to pull the log and run # it through a display program.. and graphs and other # things too. # options SCTP_LOCK_LOGGING options SCTP_MBUF_LOGGING options SCTP_MBCNT_LOGGING options SCTP_PACKET_LOGGING options SCTP_LTRACE_CHUNKS options SCTP_LTRACE_ERRORS # altq(9). Enable the base part of the hooks with the ALTQ option. # Individual disciplines must be built into the base system and can not be # loaded as modules at this point. ALTQ requires a stable TSC so if yours is # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC # option. options ALTQ options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_CODEL # CoDel Active Queueing options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_FAIRQ # Fair Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable options ALTQ_DEBUG # netgraph(4). Enable the base netgraph code with the NETGRAPH option. # Individual node types can be enabled with the corresponding option # listed below; however, this is not strictly necessary as netgraph # will automatically load the corresponding KLD module if the node type # is not already compiled into the kernel. Each type below has a # corresponding man page, e.g., ng_async(8). options NETGRAPH # netgraph(4) system options NETGRAPH_DEBUG # enable extra debugging, this # affects netgraph(4) and nodes # Node types options NETGRAPH_ASYNC options NETGRAPH_ATMLLC options NETGRAPH_ATM_ATMPIF options NETGRAPH_BLUETOOTH # ng_bluetooth(4) options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4) options NETGRAPH_BLUETOOTH_HCI # ng_hci(4) options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4) options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4) options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4) options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4) options NETGRAPH_BPF options NETGRAPH_BRIDGE options NETGRAPH_CAR options NETGRAPH_CISCO options NETGRAPH_DEFLATE options NETGRAPH_DEVICE options NETGRAPH_ECHO options NETGRAPH_EIFACE options NETGRAPH_ETHER options NETGRAPH_FRAME_RELAY options NETGRAPH_GIF options NETGRAPH_GIF_DEMUX options NETGRAPH_HOLE options NETGRAPH_IFACE options NETGRAPH_IP_INPUT options NETGRAPH_IPFW options NETGRAPH_KSOCKET options NETGRAPH_L2TP options NETGRAPH_LMI options NETGRAPH_MPPC_COMPRESSION options NETGRAPH_MPPC_ENCRYPTION options NETGRAPH_NETFLOW options NETGRAPH_NAT options NETGRAPH_ONE2MANY options NETGRAPH_PATCH options NETGRAPH_PIPE options NETGRAPH_PPP options NETGRAPH_PPPOE options NETGRAPH_PPTPGRE options NETGRAPH_PRED1 options NETGRAPH_RFC1490 options NETGRAPH_SOCKET options NETGRAPH_SPLIT options NETGRAPH_SPPP options NETGRAPH_TAG options NETGRAPH_TCPMSS options NETGRAPH_TEE options NETGRAPH_UI options NETGRAPH_VJC options NETGRAPH_VLAN # NgATM - Netgraph ATM options NGATM_ATM options NGATM_ATMBASE options NGATM_SSCOP options NGATM_SSCFU options NGATM_UNI options NGATM_CCATM device mn # Munich32x/Falc54 Nx64kbit/sec cards. # Network stack virtualization. options VIMAGE options VNET_DEBUG # debug for VIMAGE # # Network interfaces: # The `loop' device is MANDATORY when networking is enabled. device loop # The `ether' device provides generic code to handle # Ethernets; it is MANDATORY when an Ethernet device driver is # configured. device ether # The `vlan' device implements the VLAN tagging of Ethernet frames # according to IEEE 802.1Q. device vlan # The `vxlan' device implements the VXLAN encapsulation of Ethernet # frames in UDP packets according to RFC7348. device vxlan # The `wlan' device provides generic code to support 802.11 # drivers, including host AP mode; it is MANDATORY for the wi, # and ath drivers and will eventually be required by all 802.11 drivers. device wlan options IEEE80211_DEBUG #enable debugging msgs options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support options IEEE80211_SUPPORT_TDMA #enable TDMA support # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide # support for WEP, TKIP, and AES-CCMP crypto protocols optionally # used with 802.11 devices that depend on the `wlan' module. device wlan_wep device wlan_ccmp device wlan_tkip # The `wlan_xauth' device provides support for external (i.e. user-mode) # authenticators for use with 802.11 drivers that use the `wlan' # module and support 802.1x and/or WPA security protocols. device wlan_xauth # The `wlan_acl' device provides a MAC-based access control mechanism # for use with 802.11 drivers operating in ap mode and using the # `wlan' module. # The 'wlan_amrr' device provides AMRR transmit rate control algorithm device wlan_acl device wlan_amrr # The `sppp' device serves a similar role for certain types # of synchronous PPP links (like `cx', `ar'). device sppp # The `bpf' device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. DHCP requires bpf. device bpf # The `netmap' device implements memory-mapped access to network # devices from userspace, enabling wire-speed packet capture and # generation even at 10Gbit/s. Requires support in the device # driver. Supported drivers are ixgbe, e1000, re. device netmap # The `disc' device implements a minimal network interface, # which throws away all packets sent and never receives any. It is # included for testing and benchmarking purposes. device disc # The `epair' device implements a virtual back-to-back connected Ethernet # like interface pair. device epair # The `edsc' device implements a minimal Ethernet interface, # which discards all packets sent and receives none. device edsc # The `tap' device is a pty-like virtual Ethernet interface device tap # The `tun' device implements (user-)ppp and nos-tun(8) device tun # The `gif' device implements IPv6 over IP4 tunneling, # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and # IPv6 over IPv6 tunneling. # The `gre' device implements GRE (Generic Routing Encapsulation) tunneling, # as specified in the RFC 2784 and RFC 2890. # The `me' device implements Minimal Encapsulation within IPv4 as # specified in the RFC 2004. # The XBONEHACK option allows the same pair of addresses to be configured on # multiple gif interfaces. device gif device gre device me options XBONEHACK # The `stf' device implements 6to4 encapsulation. device stf # The pf packet filter consists of three devices: # The `pf' device provides /dev/pf and the firewall code itself. # The `pflog' device provides the pflog0 interface which logs packets. # The `pfsync' device provides the pfsync0 interface used for # synchronization of firewall state tables (over the net). device pf device pflog device pfsync # Bridge interface. device if_bridge # Common Address Redundancy Protocol. See carp(4) for more details. device carp # IPsec interface. device enc # Link aggregation interface. device lagg # # Internet family options: # # MROUTING enables the kernel multicast packet forwarder, which works # with mrouted and XORP. # # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" # and if you do not add other rules during startup to allow access, # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open # in /etc/rc.conf when first enabling this feature, then refining the # firewall rules in /etc/rc.firewall after you've tested that the new kernel # feature works properly. # # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to # allow everything. Use with care, if a cracker can crash your # firewall machine, they can get to your protected machines. However, # if you are using it as an as-needed filter for specific problems as # they arise, then this may be for you. Changing the default to 'allow' # means that you won't get stuck if the kernel and /sbin/ipfw binary get # out of sync. # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It # depends on IPFIREWALL if compiled into the kernel. # # IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires # LIBALIAS. # # IPFIREWALL_NAT64 adds support for in kernel NAT64 in ipfw. # # IPFIREWALL_NPTV6 adds support for in kernel NPTv6 in ipfw. # # IPFIREWALL_PMOD adds support for protocols modification module. Currently # it supports only TCP MSS modification. # # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding # packets without touching the TTL). This can be useful to hide firewalls # from traceroute and similar tools. # # PF_DEFAULT_TO_DROP causes the default pf(4) rule to deny everything. # # TCPDEBUG enables code which keeps traces of the TCP state machine # for sockets with the SO_DEBUG option set, which can then be examined # using the trpt(8) utility. # # TCPPCAP enables code which keeps the last n packets sent and received # on a TCP socket. # # TCP_BLACKBOX enables enhanced TCP event logging. # # TCP_HHOOK enables the hhook(9) framework hooks for the TCP stack. # # RADIX_MPATH provides support for equal-cost multi-path routing. # options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPFIREWALL_NAT #ipfw kernel nat support options IPFIREWALL_NAT64 #ipfw kernel NAT64 support options IPFIREWALL_NPTV6 #ipfw kernel IPv6 NPT support options IPDIVERT #divert sockets options IPFILTER #ipfilter support options IPFILTER_LOG #ipfilter logging options IPFILTER_LOOKUP #ipfilter pools options IPFILTER_DEFAULT_BLOCK #block all packets by default options IPSTEALTH #support for stealth forwarding options PF_DEFAULT_TO_DROP #drop everything by default options TCPDEBUG options TCPPCAP options TCP_BLACKBOX options TCP_HHOOK options RADIX_MPATH # The MBUF_STRESS_TEST option enables options which create # various random failures / extreme cases related to mbuf # functions. See mbuf(9) for a list of available test cases. # MBUF_PROFILING enables code to profile the mbuf chains # exiting the system (via participating interfaces) and # return a logarithmic histogram of monitored parameters # (e.g. packet size, wasted space, number of mbufs in chain). options MBUF_STRESS_TEST options MBUF_PROFILING # Statically link in accept filters options ACCEPT_FILTER_DATA options ACCEPT_FILTER_DNS options ACCEPT_FILTER_HTTP # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are # carried in TCP option 19. This option is commonly used to protect # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable. # This is enabled on a per-socket basis using the TCP_MD5SIG socket option. # This requires the use of 'device crypto' and either 'options IPSEC' or # 'options IPSEC_SUPPORT'. options TCP_SIGNATURE #include support for RFC 2385 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL # as well. See dummynet(4) and ipfw(8) for more info. When you run # DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve # a smooth scheduling of the traffic. options DUMMYNET # The NETDUMP option enables netdump(4) client support in the kernel. # This allows a panicking kernel to transmit a kernel dump to a remote host. options NETDUMP ##################################################################### # FILESYSTEM OPTIONS # # Only the root filesystem needs to be statically compiled or preloaded # as module; everything else will be automatically loaded at mount # time. Some people still prefer to statically compile other # filesystems as well. # # NB: The UNION filesystem was known to be buggy in the past. It is now # being actively maintained, although there are still some issues being # resolved. # # One of these is mandatory: options FFS #Fast filesystem options NFSCL #Network File System client # The rest are optional: options AUTOFS #Automounter filesystem options CD9660 #ISO 9660 filesystem options FDESCFS #File descriptor filesystem options FUSE #FUSE support module options MSDOSFS #MS DOS File System (FAT, FAT32) options NFSLOCKD #Network Lock Manager options NFSD #Network Filesystem Server options KGSSAPI #Kernel GSSAPI implementation options NULLFS #NULL filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options PSEUDOFS_TRACE #Debugging support for PSEUDOFS options SMBFS #SMB/CIFS filesystem options TMPFS #Efficient memory filesystem options UDF #Universal Disk Format options UNIONFS #Union filesystem # The xFS_ROOT options REQUIRE the associated ``options xFS'' options NFS_ROOT #NFS usable as root device # Soft updates is a technique for improving filesystem speed and # making abrupt shutdown less risky. # options SOFTUPDATES # Extended attributes allow additional data to be associated with files, # and is used for ACLs, Capabilities, and MAC labels. # See src/sys/ufs/ufs/README.extattr for more information. options UFS_EXTATTR options UFS_EXTATTR_AUTOSTART # Access Control List support for UFS filesystems. The current ACL # implementation requires extended attribute support, UFS_EXTATTR, # for the underlying filesystem. # See src/sys/ufs/ufs/README.acls for more information. options UFS_ACL # Directory hashing improves the speed of operations on very large # directories at the expense of some memory. options UFS_DIRHASH # Gjournal-based UFS journaling support. options UFS_GJOURNAL # Make space in the kernel for a root filesystem on a md device. # Define to the number of kilobytes to reserve for the filesystem. # This is now optional. # If not defined, the root filesystem passed in as the MFS_IMAGE makeoption # will be automatically embedded in the kernel during linking. Its exact size # will be consumed within the kernel. # If defined, the old way of embedding the filesystem in the kernel will be # used. That is to say MD_ROOT_SIZE KB will be allocated in the kernel and # later, the filesystem image passed in as the MFS_IMAGE makeoption will be # dd'd into the reserved space if it fits. options MD_ROOT_SIZE=10 # Make the md device a potential root device, either with preloaded # images of type mfs_root or md_root. options MD_ROOT # Write-protect the md root device so that it may not be mounted writeable. options MD_ROOT_READONLY # Allow to read MD image from external memory regions options MD_ROOT_MEM # Disk quotas are supported when this option is enabled. options QUOTA #enable disk quotas # If you are running a machine just as a fileserver for PC and MAC # users, using SAMBA, you may consider setting this option # and keeping all those users' directories on a filesystem that is # mounted with the suiddir option. This gives new files the same # ownership as the directory (similar to group). It's a security hole # if you let these users run programs, so confine it to file-servers # (but it'll save you lots of headaches in those cases). Root owned # directories are exempt and X bits are cleared. The suid bit must be # set on the directory as well; see chmod(1). PC owners can't see/set # ownerships so they keep getting their toes trodden on. This saves # you all the support calls as the filesystem it's used on will act as # they expect: "It's my dir so it must be my file". # options SUIDDIR # NFS options: options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec options NFS_MAXATTRTIMO=60 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec options NFS_MAXDIRATTRTIMO=60 options NFS_DEBUG # Enable NFS Debugging # # Add support for the EXT2FS filesystem of Linux fame. Be a bit # careful with this - the ext2fs code has a tendency to lag behind # changes and not be exercised very much, so mounting read/write could # be dangerous (and even mounting read only could result in panics.) # options EXT2FS # Cryptographically secure random number generator; /dev/random device random # The system memory devices; /dev/mem, /dev/kmem device mem # The kernel symbol table device; /dev/ksyms device ksyms # Optional character code conversion support with LIBICONV. # Each option requires their base file system and LIBICONV. options CD9660_ICONV options MSDOSFS_ICONV options UDF_ICONV ##################################################################### # POSIX P1003.1B # Real time extensions added in the 1993 POSIX # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING options _KPOSIX_PRIORITY_SCHEDULING # p1003_1b_semaphores are very experimental, # user should be ready to assist in debugging if problems arise. options P1003_1B_SEMAPHORES # POSIX message queue options P1003_1B_MQUEUE ##################################################################### # SECURITY POLICY PARAMETERS # Support for BSM audit options AUDIT # Support for Mandatory Access Control (MAC): options MAC options MAC_BIBA options MAC_BSDEXTENDED options MAC_IFOFF options MAC_LOMAC options MAC_MLS options MAC_NONE options MAC_NTPD options MAC_PARTITION options MAC_PORTACL options MAC_SEEOTHERUIDS options MAC_STUB options MAC_TEST # Support for Capsicum options CAPABILITIES # fine-grained rights on file descriptors options CAPABILITY_MODE # sandboxes with no global namespace access ##################################################################### # CLOCK OPTIONS # The granularity of operation is controlled by the kernel option HZ whose # default value (1000 on most architectures) means a granularity of 1ms # (1s/HZ). Historically, the default was 100, but finer granularity is # required for DUMMYNET and other systems on modern hardware. There are # reasonable arguments that HZ should, in fact, be 100 still; consider, # that reducing the granularity too much might cause excessive overhead in # clock interrupt processing, potentially causing ticks to be missed and thus # actually reducing the accuracy of operation. options HZ=100 # Enable support for the kernel PLL to use an external PPS signal, # under supervision of [x]ntpd(8) # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp options PPS_SYNC # Enable support for generic feed-forward clocks in the kernel. # The feed-forward clock support is an alternative to the feedback oriented # ntpd/system clock approach, and is to be used with a feed-forward # synchronization algorithm such as the RADclock: # More info here: http://www.synclab.org/radclock options FFCLOCK ##################################################################### # SCSI DEVICES # SCSI DEVICE CONFIGURATION # The SCSI subsystem consists of the `base' SCSI code, a number of # high-level SCSI device `type' drivers, and the low-level host-adapter # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # # It is possible to wire down your SCSI devices so that a given bus, # target, and LUN always come on line as the same device unit. In # earlier versions the unit numbers were assigned in the order that # the devices were probed on the SCSI bus. This means that if you # removed a disk drive, you may have had to rewrite your /etc/fstab # file, and also that you had to be careful when adding a new disk # as it may have been probed earlier and moved your device configuration # around. (See also option GEOM_VOL for a different solution to this # problem.) # This old behavior is maintained as the default behavior. The unit # assignment begins with the first non-wired down unit for a device # type. For example, if you wire a disk as "da3" then the first # non-wired disk will be assigned da4. # The syntax for wiring down devices is: hint.scbus.0.at="ahc0" hint.scbus.1.at="ahc1" hint.scbus.1.bus="0" hint.scbus.3.at="ahc2" hint.scbus.3.bus="0" hint.scbus.2.at="ahc2" hint.scbus.2.bus="1" hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" hint.da.1.at="scbus3" hint.da.1.target="1" hint.da.2.at="scbus2" hint.da.2.target="3" hint.sa.1.at="scbus1" hint.sa.1.target="6" # "units" (SCSI logical unit number) that are not specified are # treated as if specified as LUN 0. # All SCSI devices allocate as many units as are required. # The ch driver drives SCSI Media Changer ("jukebox") devices. # # The da driver drives SCSI Direct Access ("disk") and Optical Media # ("WORM") devices. # # The sa driver drives SCSI Sequential Access ("tape") devices. # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # # The ses driver drives SCSI Environment Services ("ses") and # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # # The sg driver provides a passthrough API that is compatible with the # Linux SG driver. It will work in conjunction with the COMPAT_LINUX # option to run linux SG apps. It can also stand on its own and provide # source level API compatibility for porting apps to FreeBSD. # # Target Mode support is provided here but also requires that a SIM # (SCSI Host Adapter Driver) provide support as well. # # The targ driver provides target mode support as a Processor type device. # It exists to give the minimal context necessary to respond to Inquiry # commands. There is a sample user application that shows how the rest # of the command support might be done in /usr/share/examples/scsi_target. # # The targbh driver provides target mode support and exists to respond # to incoming commands that do not otherwise have a logical unit assigned # to them. # # The pass driver provides a passthrough API to access the CAM subsystem. device scbus #base SCSI code device ch #SCSI media changers device da #SCSI direct access devices (aka disks) device sa #SCSI tapes device cd #SCSI CD-ROMs device ses #Enclosure Services (SES and SAF-TE) device pt #SCSI processor device targ #SCSI Target Mode Code device targbh #SCSI Target Mode Blackhole Device device pass #CAM passthrough driver device sg #Linux SCSI passthrough device ctl #CAM Target Layer # CAM OPTIONS: # debugging options: # CAMDEBUG Compile in all possible debugging. # CAM_DEBUG_COMPILE Debug levels to compile in. # CAM_DEBUG_FLAGS Debug levels to enable on boot. # CAM_DEBUG_BUS Limit debugging to the given bus. # CAM_DEBUG_TARGET Limit debugging to the given target. # CAM_DEBUG_LUN Limit debugging to the given lun. # CAM_DEBUG_DELAY Delay in us after printing each debug line. # # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) # queue after a bus reset, and the number of milliseconds to # freeze the device queue after a bus device reset. This # can be changed at boot and runtime with the # kern.cam.scsi_delay tunable/sysctl. options CAMDEBUG options CAM_DEBUG_COMPILE=-1 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH) options CAM_DEBUG_BUS=-1 options CAM_DEBUG_TARGET=-1 options CAM_DEBUG_LUN=-1 options CAM_DEBUG_DELAY=1 options CAM_MAX_HIGHPOWER=4 options SCSI_NO_SENSE_STRINGS options SCSI_NO_OP_STRINGS options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device options CAM_IOSCHED_DYNAMIC options CAM_TEST_FAILURE # Options for the CAM CDROM driver: # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only # enforced if there is I/O waiting for another LUN # The compiled in defaults for these variables are 2 and 10 seconds, # respectively. # # These can also be changed on the fly with the following sysctl variables: # kern.cam.cd.changer.min_busy_seconds # kern.cam.cd.changer.max_busy_seconds # options CHANGER_MIN_BUSY_SECONDS=2 options CHANGER_MAX_BUSY_SECONDS=10 # Options for the CAM sequential access driver: # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT. options SA_IO_TIMEOUT=4 options SA_SPACE_TIMEOUT=60 options SA_REWIND_TIMEOUT=(2*60) options SA_ERASE_TIMEOUT=(4*60) options SA_1FM_AT_EOD # Optional timeout for the CAM processor target (pt) device # This is specified in seconds. The default is 60 seconds. options SCSI_PT_DEFAULT_TIMEOUT=60 # Optional enable of doing SES passthrough on other devices (e.g., disks) # # Normally disabled because a lot of newer SCSI disks report themselves # as having SES capabilities, but this can then clot up attempts to build # a topology with the SES device that's on the box these drives are in.... options SES_ENABLE_PASSTHROUGH ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device pty #BSD-style compatibility pseudo ttys device nmdm #back-to-back tty devices device md #Memory/malloc disk device snp #Snoop device - to look at pty/vty/etc.. device ccd #Concatenated disk driver device firmware #firmware(9) support # Kernel side iconv library options LIBICONV # Size of the kernel message buffer. Should be N * pagesize. options MSGBUF_SIZE=40960 ##################################################################### # HARDWARE BUS CONFIGURATION # # PCI bus & PCI options: # device pci options PCI_HP # PCI-Express native HotPlug options PCI_IOV # PCI SR-IOV support ##################################################################### # HARDWARE DEVICE CONFIGURATION # For ISA the required hints are listed. # PCI, CardBus, SD/MMC and pccard are self identifying buses, so # no hints are needed. # # Mandatory devices: # # These options are valid for other keyboard drivers as well. options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap options KBD_INSTALL_CDEV # install a CDEV entry in /dev device kbdmux # keyboard multiplexer options KBDMUX_DFLT_KEYMAP # specify the built-in keymap makeoptions KBDMUX_DFLT_KEYMAP=it.iso options FB_DEBUG # Frame buffer debugging device splash # Splash screen and screen saver support # Various screen savers. device blank_saver device daemon_saver device dragon_saver device fade_saver device fire_saver device green_saver device logo_saver device rain_saver device snake_saver device star_saver device warp_saver # The syscons console driver (SCO color console compatible). device sc hint.sc.0.at="isa" options MAXCONS=16 # number of virtual consoles options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp850 options SC_DISABLE_KDBKEY # disable `debug' key options SC_DISABLE_REBOOT # disable reboot key sequence options SC_HISTORY_SIZE=200 # number of history buffer lines options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor options SC_PIXEL_MODE # add support for the raster text mode # The following options will let you change the default colors of syscons. options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK) options SC_KERNEL_CONS_ATTRS=\"\x0c\x0d\x0e\x0f\x02\x09\x0a\x0b\" options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) # The following options will let you change the default behavior of # cut-n-paste feature options SC_CUT_SPACES2TABS # convert leading spaces into tabs options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words # (default is single space - \"x20\") # If you have a two button mouse, you may want to add the following option # to use the right button of the mouse to paste text. options SC_TWOBUTTON_MOUSE # You can selectively disable features in syscons. options SC_NO_CUTPASTE options SC_NO_FONT_LOADING options SC_NO_HISTORY options SC_NO_MODE_CHANGE options SC_NO_SYSMOUSE options SC_NO_SUSPEND_VTYSWITCH # `flags' for sc # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode # 0x100 Probe for a keyboard device periodically if one is not present # Enable experimental features of the syscons terminal emulator (teken). options TEKEN_CONS25 # cons25-style terminal emulation options TEKEN_UTF8 # UTF-8 output handling # The vt video console driver. device vt options VT_ALT_TO_ESC_HACK=1 # Prepend ESC sequence to ALT keys options VT_MAXWINDOWS=16 # Number of virtual consoles options VT_TWOBUTTON_MOUSE # Use right mouse button to paste # The following options set the default framebuffer size. options VT_FB_DEFAULT_HEIGHT=480 options VT_FB_DEFAULT_WIDTH=640 # The following options will let you change the default vt terminal colors. options TERMINAL_NORM_ATTR=(FG_GREEN|BG_BLACK) options TERMINAL_KERN_ATTR=(FG_LIGHTRED|BG_BLACK) # # Optional devices: # # # SCSI host adapters: # # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx # ahd: Adaptec 29320/39320 Controllers. # esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers # including the AMD Am53C974 (found on devices such as the Tekram # DC-390(T)) and the Sun ESP and FAS families of controllers # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters. # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters. # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters. # ispfw: Firmware module for Qlogic host adapters # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4 # or FC9x9 Fibre Channel host adapters. # ncr: NCR 53C810, 53C825 self-contained SCSI host adapters. # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors: # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875, # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. # trm: Tekram DC395U/UW/F DC315U adapters. device ahc device ahd device esp device iscsi_initiator device isp hint.isp.0.disable="1" hint.isp.0.role="3" hint.isp.0.prefer_iomap="1" hint.isp.0.prefer_memmap="1" hint.isp.0.fwload_disable="1" hint.isp.0.ignore_nvram="1" hint.isp.0.fullduplex="1" hint.isp.0.topology="lport" hint.isp.0.topology="nport" hint.isp.0.topology="lport-only" hint.isp.0.topology="nport-only" # we can't get u_int64_t types, nor can we get strings if it's got # a leading 0x, hence this silly dodge. hint.isp.0.portwnn="w50000000aaaa0000" hint.isp.0.nodewnn="w50000000aaaa0001" device ispfw device mpt device ncr device sym device trm # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, # this doesn't work on some motherboards, which prevents it from being the # default. options AHC_ALLOW_MEMIO # Dump the contents of the ahc controller configuration PROM. options AHC_DUMP_EEPROM # Bitmap of units to enable targetmode operations. options AHC_TMODE_ENABLE # Compile in Aic7xxx Debugging code. options AHC_DEBUG # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h options AHC_DEBUG_OPTS # Print register bitfields in debug output. Adds ~128k to driver # See ahc(4). options AHC_REG_PRETTY_PRINT # Compile in aic79xx debugging code. options AHD_DEBUG # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4). options AHD_DEBUG_OPTS=0xFFFFFFFF # Print human-readable register definitions when debugging options AHD_REG_PRETTY_PRINT # Bitmap of units to enable targetmode operations. options AHD_TMODE_ENABLE # Options used in dev/iscsi (Software iSCSI stack) # options ISCSI_INITIATOR_DEBUG=9 # Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # options ISP_TARGET_MODE=1 # # ISP_DEFAULT_ROLES - default role # none=0 # target=1 # initiator=2 # both=3 (not supported currently) # # ISP_INTERNAL_TARGET (trivial internal disk target, for testing) # options ISP_DEFAULT_ROLES=0 # Options used in dev/sym/ (Symbios SCSI driver). #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 #options SYM_SETUP_PCI_PARITY #-PCI parity checking # disabled:0, enabled:1 (default) #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] -# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/). -# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O. -# The DPT controllers are commonly re-licensed under other brand-names - -# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and -# Compaq are actually DPT controllers. -# -# See src/sys/dev/dpt for debugging and other subtle options. -# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various -# instruments are enabled. The tools in -# /usr/sbin/dpt_* assume these to be enabled. -# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h -# DPT_RESET_HBA Make "reset" actually reset the controller -# instead of fudging it. Only enable this if you -# are 100% certain you need it. - -device dpt - -# DPT options -#!CAM# options DPT_MEASURE_PERFORMANCE -options DPT_RESET_HBA - # # Compaq "CISS" RAID controllers (SmartRAID 5* series) # These controllers have a SCSI-like interface, and require the # CAM infrastructure. # device ciss # # Intel Integrated RAID controllers. # This driver was developed and is maintained by Intel. Contacts # at Intel for this driver are # "Kannanthanam, Boji T" and # "Leubner, Achim" . # device iir # # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later # firmware. These controllers have a SCSI-like interface, and require # the CAM infrastructure. # device mly # # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only # one entry is needed; the code will find and configure all supported # controllers. # device ida # Compaq Smart RAID device mlx # Mylex DAC960 device amr # AMI MegaRAID device amrp # SCSI Passthrough interface (optional, CAM req.) device mfi # LSI MegaRAID SAS device mfip # LSI MegaRAID SAS passthrough, requires CAM options MFI_DEBUG device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s # # 3ware ATA RAID # device twe # 3ware ATA RAID # # Serial ATA host controllers: # # ahci: Advanced Host Controller Interface (AHCI) compatible # mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers # siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers # # These drivers are part of cam(4) subsystem. They supersede less featured # ata(4) subsystem drivers, supporting same hardware. device ahci device mvs device siis # # The 'ATA' driver supports all legacy ATA/ATAPI controllers, including # PC Card devices. You only need one "device ata" for it to find all # PCI and PC Card ATA/ATAPI devices on modern machines. # Alternatively, individual bus and chipset drivers may be chosen by using # the 'atacore' driver then selecting the drivers on a per vendor basis. # For example to build a system which only supports a VIA chipset, # omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers. device ata # Modular ATA #device atacore # Core ATA functionality #device atacard # CARDBUS support #device ataisa # ISA bus support #device atapci # PCI bus support; only generic chipset support # PCI ATA chipsets #device ataacard # ACARD #device ataacerlabs # Acer Labs Inc. (ALI) #device ataamd # American Micro Devices (AMD) #device ataati # ATI #device atacenatek # Cenatek #device atacypress # Cypress #device atacyrix # Cyrix #device atahighpoint # HighPoint #device ataintel # Intel #device ataite # Integrated Technology Inc. (ITE) #device atajmicron # JMicron #device atamarvell # Marvell #device atamicron # Micron #device atanational # National #device atanetcell # NetCell #device atanvidia # nVidia #device atapromise # Promise #device ataserverworks # ServerWorks #device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD) #device atasis # Silicon Integrated Systems Corp.(SiS) #device atavia # VIA Technologies Inc. # # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add: hint.ata.0.at="isa" hint.ata.0.port="0x1f0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" # # The following options are valid on the ATA driver: # # ATA_REQUEST_TIMEOUT: the number of seconds to wait for an ATA request # before timing out. #options ATA_REQUEST_TIMEOUT=10 # # Standard floppy disk controllers and floppy tapes, supports # the Y-E DATA External FDD (PC Card) # device fdc hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" # # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you # gotta turn it actually on by setting the variable fd_debug with DDB, # however. options FDC_DEBUG # # Activate this line if you happen to have an Insight floppy tape. # Probing them proved to be dangerous for people with floppy disks only, # so it's "hidden" behind a flag: #hint.fdc.0.flags="1" # Specify floppy devices hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" # # uart: newbusified driver for serial interfaces. It consolidates the sio(4), # sab(4) and zs(4) drivers. # device uart # Options for uart(4) options UART_PPS_ON_CTS # Do time pulse capturing using CTS # instead of DCD. options UART_POLL_FREQ # Set polling rate, used when hw has # no interrupt support (50 Hz default). # The following hint should only be used for pure ISA devices. It is not # needed otherwise. Use of hints is strongly discouraged. hint.uart.0.at="isa" # The following 3 hints are used when the UART is a system device (i.e., a # console or debug port), but only on platforms that don't have any other # means to pass the information to the kernel. The unit number of the hint # is only used to bundle the hints together. There is no relation to the # unit number of the probed UART. hint.uart.0.port="0x3f8" hint.uart.0.flags="0x10" hint.uart.0.baud="115200" # `flags' for serial drivers that support consoles like sio(4) and uart(4): # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. # Boot with -h or set boot_serial=YES in the loader. For sio(4) # specifically, the 0x20 flag can also be set (see above). # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is # preferred. Setting this flag for sio0 gives the old behavior. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. # # Options for serial drivers that support consoles: options BREAK_TO_DEBUGGER # A BREAK/DBG on the console goes to # ddb, if available. # Solaris implements a new BREAK which is initiated by a character # sequence CR ~ ^b which is similar to a familiar pattern used on # Sun servers by the Remote Console. There are FreeBSD extensions: # CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot. options ALT_BREAK_TO_DEBUGGER # Serial Communications Controller # Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel # communications controllers. device scc # PCI Universal Communications driver # Supports various multi port PCI I/O cards. device puc # # Network interfaces: # # MII bus support is required for many PCI Ethernet NICs, # namely those which use MII-compliant transceivers or implement # transceiver control interfaces that operate like an MII. Adding # "device miibus" to the kernel config pulls in support for the generic # miibus API, the common support for for bit-bang'ing the MII and all # of the PHY drivers, including a generic one for PHYs that aren't # specifically handled by an individual driver. Support for specific # PHYs may be built by adding "device mii", "device mii_bitbang" if # needed by the NIC driver and then adding the appropriate PHY driver. device mii # Minimal MII support device mii_bitbang # Common module for bit-bang'ing the MII device miibus # MII support w/ bit-bang'ing and all PHYs device acphy # Altima Communications AC101 device amphy # AMD AM79c873 / Davicom DM910{1,2} device atphy # Attansic/Atheros F1 device axphy # Asix Semiconductor AX88x9x device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C device bnxt # Broadcom NetXtreme-C/NetXtreme-E device brgphy # Broadcom BCM54xx/57xx 1000baseTX device ciphy # Cicada/Vitesse CS/VSC8xxx device e1000phy # Marvell 88E1000 1000/100/10-BT device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces device icsphy # ICS ICS1889-1893 device ip1000phy # IC Plus IP1000A/IP1001 device jmphy # JMicron JMP211/JMP202 device lxtphy # Level One LXT-970 device mlphy # Micro Linear 6692 device nsgphy # NatSemi DP8361/DP83865/DP83891 device nsphy # NatSemi DP83840A device nsphyter # NatSemi DP83843/DP83815 device pnaphy # HomePNA device qsphy # Quality Semiconductor QS6612 device rdcphy # RDC Semiconductor R6040 device rgephy # RealTek 8169S/8110S/8211B/8211C device rlphy # RealTek 8139 device rlswitch # RealTek 8305 device smcphy # SMSC LAN91C111 device tdkphy # TDK 89Q2120 device tlphy # Texas Instruments ThunderLAN device truephy # LSI TruePHY device xmphy # XaQti XMAC II # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA, # PCI and ISA varieties. # ae: Support for gigabit ethernet adapters based on the Attansic/Atheros # L2 PCI-Express FastEthernet controllers. # age: Support for gigabit ethernet adapters based on the Attansic/Atheros # L1 PCI express gigabit ethernet controllers. # alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers. # ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers. # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet # adapters. # bfe: Broadcom BCM4401 Ethernet adapter. # bge: Support for gigabit ethernet adapters based on the Broadcom # BCM570x family of controllers, including the 3Com 3c996-T, # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and # the embedded gigE NICs on Dell PowerEdge 2550 servers. # bnxt: Broadcom NetXtreme-C and NetXtreme-E PCIe 10/25/50G Ethernet adapters. # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet # adapters. # bwi: Broadcom BCM430* and BCM431* family of wireless adapters. # bwn: Broadcom BCM43xx family of wireless adapters. # cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn # cxgb: Chelsio T3 based 1GbE/10GbE PCIe Ethernet adapters. # cxgbe:Chelsio T4, T5, and T6-based 1/10/25/40/100GbE PCIe Ethernet # adapters. # cxgbev: Chelsio T4, T5, and T6-based PCIe Virtual Functions. # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143 # and various workalikes including: # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver # replaces the old al, ax, dm, pn and mx drivers. List of brands: # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110, # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX, # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204, # KNE110TX. # de: Digital Equipment DC21040 # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters. # ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589 # and PC Card devices using these chipsets. # ex: Intel EtherExpress Pro/10 and other i82595-based adapters, # Olicom Ethernet PC Card devices. # fe: Fujitsu MB86960A/MB86965A Ethernet # fxp: Intel EtherExpress Pro/100B # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping) # gem: Apple GMAC/Sun ERI/Sun GEM # hme: Sun HME (Happy Meal Ethernet) # jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters. # le: AMD Am7900 LANCE and Am79C9xx PCnet # lge: Support for PCI gigabit ethernet adapters based on the Level 1 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX, # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards. # lio: Support for Cavium 23XX Ethernet adapters # malo: Marvell Libertas wireless NICs. # mwl: Marvell 88W8363 802.11n wireless NICs. # Requires the mwl firmware module # mwlfw: Marvell 88W8363 firmware # msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect # Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061, # 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053, # 88E8055, 88E8056 and D-Link 560T/550SX. # mlx5: Mellanox ConnectX-4 and ConnectX-4 LX IB and Eth shared code module. # mlx5en:Mellanox ConnectX-4 and ConnectX-4 LX PCIe Ethernet adapters. # my: Myson Fast Ethernet (MTD80X, MTD89X) # nge: Support for PCI gigabit ethernet adapters based on the National # Semiconductor DP83820 and DP83821 chipset. This includes the # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom # EP-320G-TX and the Netgear GA622T. # oce: Emulex 10 Gbit adapters (OneConnect Ethernet) # pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x # PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home # chipsets. These can also be handled by the le(4) driver if the # pcn(4) driver is left out of the kernel. The le(4) driver does not # support the additional features like the MII bus and burst mode of # the PCnet-FAST and greater chipsets though. # ral: Ralink Technology IEEE 802.11 wireless adapter # re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139 # chipset. Note that the RealTek driver defaults to using programmed # I/O to do register accesses because memory mapped mode seems to cause # severe lockups on SMP hardware. This driver also supports the # Accton EN1207D `Cheetah' adapter, which uses a chip called # the MPX 5030/5038, which is either a RealTek in disguise or a # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek # chipset and is supported by this driver, not the 'vr' driver. # rtwn: RealTek wireless adapters. # rtwnfw: RealTek wireless firmware. # sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the # Adaptec AIC-6915 "starfire" controller. # This includes dual and quad port cards, as well as one 100baseFX card. # Most of these are 64-bit PCI devices, except for one single port # card which is 32-bit. # sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter # sis: Support for NICs based on the Silicon Integrated Systems SiS 900, # SiS 7016 and NS DP83815 PCI fast ethernet controller chips. # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs. # This includes the SK-9841 and SK-9842 single port cards (single mode # and multimode fiber) and the SK-9843 and SK-9844 dual port cards # (also single mode and multimode). # The driver will autodetect the number of ports on the card and # attach each one as a separate network interface. # sn: Support for ISA and PC Card Ethernet devices using the # SMC91C90/92/94/95 chips. # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes # the D-Link DFE-550TX. # stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack # TC9021 family of controllers, including the Sundance ST2021/ST2023, # the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101. # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the # 3Com 3c985, the Netgear GA620 and various others. Note that you will # probably want to bump up kern.ipc.nmbclusters a lot to use this driver. # tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN' # cards and integrated ethernet controllers. This includes several # Compaq Netelligent 10/100 cards and the built-in ethernet controllers # in several Compaq Prosignia, Proliant and Deskpro systems. It also # supports several Olicom 10Mbps and 10/100 boards. # tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series) # txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset # vr: Support for various fast ethernet adapters based on the VIA # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, # including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for # DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320. # vte: DM&P Vortex86 RDC R6040 Fast Ethernet # vx: 3Com 3C590 and 3C595 # wb: Support for fast ethernet adapters based on the Winbond W89C840F chip. # Note: this is not the same as the Winbond W89C940F, which is a # NE2000 clone. # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA # bridge with a PCMCIA adapter plugged into it. # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller, # Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card, # Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56 # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast) # Etherlink XL cards and integrated controllers. This includes the # integrated 3c905B-TX chips in certain Dell Optiplex and Dell # Precision desktop machines and the integrated 3c905-TX chips # in Dell Latitude laptop docking stations. # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX # Order for ISA devices is important here device ep device ex device fe hint.fe.0.at="isa" hint.fe.0.port="0x300" device sn hint.sn.0.at="isa" hint.sn.0.port="0x300" hint.sn.0.irq="10" device an device wi device xe # PCI Ethernet NICs that use the common MII bus controller code. device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) hint.fxp.0.prefer_iomap="0" device gem # Apple GMAC/Sun ERI/Sun GEM device hme # Sun HME (Happy Meal Ethernet) device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device mlx5 # Shared code module between IB and Ethernet device mlx5en # Mellanox ConnectX-4 and ConnectX-4 LX device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device my # Myson Fast Ethernet (MTD80X, MTD89X) device nge # NatSemi DP83820 gigabit Ethernet device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device pcn # AMD Am79C97x PCI 10/100 NICs device sf # Adaptec AIC-6915 (``Starfire'') device sge # Silicon Integrated Systems SiS190/191 device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device vte # DM&P Vortex86 RDC R6040 Fast Ethernet device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # PCI Ethernet NICs. device cxgb # Chelsio T3 10 Gigabit Ethernet device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware device cxgbe # Chelsio T4-T6 1/10/25/40/100 Gigabit Ethernet device cxgbev # Chelsio T4-T6 Virtual Functions device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel Pro/1000 Gigabit Ethernet device ix # Intel Pro/10Gbe PCIE Ethernet device ixv # Intel Pro/10Gbe PCIE Ethernet VF device le # AMD Am7900 LANCE and Am79C9xx PCnet device mxge # Myricom Myri-10G 10GbE NIC device oce # Emulex 10 GbE (OneConnect Ethernet) device ti # Alteon Networks Tigon I/II gigabit Ethernet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI IEEE 802.11 Wireless NICs device ath # Atheros pci/cardbus NIC's device ath_hal # pci/cardbus chip support #device ath_ar5210 # AR5210 chips #device ath_ar5211 # AR5211 chips #device ath_ar5212 # AR5212 chips #device ath_rf2413 #device ath_rf2417 #device ath_rf2425 #device ath_rf5111 #device ath_rf5112 #device ath_rf5413 #device ath_ar5416 # AR5416 chips options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors # All of the AR5212 parts have a problem when paired with the AR71xx # CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx # only. Details of the exact nature of the bug are sketchy, but some can be # found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and # 6. This option enables this workaround. There is a performance penalty # for this work around, but without it things don't work at all. The DMA # from the card usually bursts 128 bytes, but on the affected CPUs, only # 4 are safe. options AH_RXCFG_SDMAMW_4BYTES #device ath_ar9160 # AR9160 chips #device ath_ar9280 # AR9280 chips #device ath_ar9285 # AR9285 chips device ath_rate_sample # SampleRate tx rate control for ath device bwi # Broadcom BCM430* BCM431* device bwn # Broadcom BCM43xx device malo # Marvell Libertas wireless NICs. device mwl # Marvell 88W8363 802.11n wireless NICs. device mwlfw device ral # Ralink Technology RT2500 wireless NICs. device rtwn # Realtek wireless NICs device rtwnfw # Use sf_buf(9) interface for jumbo buffers on ti(4) controllers. #options TI_SF_BUF_JUMBO # Turn on the header splitting option for the ti(4) driver firmware. This # only works for Tigon II chips, and has no effect for Tigon I chips. # This option requires the TI_SF_BUF_JUMBO option above. #options TI_JUMBO_HDRSPLIT # These two options allow manipulating the mbuf cluster size and mbuf size, # respectively. Be very careful with NIC driver modules when changing # these from their default values, because that can potentially cause a # mismatch between the mbuf size assumed by the kernel and the mbuf size # assumed by a module. The only driver that currently has the ability to # detect a mismatch is ti(4). options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB options MSIZE=512 # mbuf size in bytes # # Sound drivers # # sound: The generic sound driver. # device sound # # snd_*: Device-specific drivers. # # The flags of the device tell the device a bit more info about the # device that normally is obtained through the PnP interface. # bit 2..0 secondary DMA channel; # bit 4 set if the board uses two dma channels; # bit 15..8 board type, overrides autodetection; leave it # zero if don't know what to put in (and you don't, # since this is unsupported at the moment...). # # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP. # snd_als4000: Avance Logic ALS4000 PCI. # snd_atiixp: ATI IXP 200/300/400 PCI. # snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only # for sparc64. # snd_cmi: CMedia CMI8338/CMI8738 PCI. # snd_cs4281: Crystal Semiconductor CS4281 PCI. # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except # 4281) # snd_ds1: Yamaha DS-1 PCI. # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI. # snd_emu10kx: Creative SoundBlaster Live! and Audigy # snd_envy24: VIA Envy24 and compatible, needs snd_spicds. # snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds. # snd_es137x: Ensoniq AudioPCI ES137x PCI. # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in # conjunction with snd_sbc. # snd_fm801: Forte Media FM801 PCI. # snd_gusc: Gravis UltraSound ISA PnP/non-PnP. # snd_hda: Intel High Definition Audio (Controller) and # compatible. # snd_hdspe: RME HDSPe AIO and RayDAT. # snd_ich: Intel ICH AC'97 and some more audio controllers # embedded in a chipset, for example nVidia # nForce controllers. # snd_maestro: ESS Technology Maestro-1/2x PCI. # snd_maestro3: ESS Technology Maestro-3/Allegro PCI. # snd_mss: Microsoft Sound System ISA PnP/non-PnP. # snd_neomagic: Neomagic 256 AV/ZX PCI. # snd_sb16: Creative SoundBlaster16, to be used in # conjunction with snd_sbc. # snd_sb8: Creative SoundBlaster (pre-16), to be used in # conjunction with snd_sbc. # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP. # Supports ESS and Avance ISA chips as well. # snd_solo: ESS Solo-1x PCI. # snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers. # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs # M5451 PCI. # snd_uaudio: USB audio. # snd_via8233: VIA VT8233x PCI. # snd_via82c686: VIA VT82C686A PCI. # snd_vibes: S3 Sonicvibes PCI. device snd_ad1816 device snd_als4000 device snd_atiixp #device snd_audiocs device snd_cmi device snd_cs4281 device snd_csa device snd_ds1 device snd_emu10k1 device snd_emu10kx device snd_envy24 device snd_envy24ht device snd_es137x device snd_ess device snd_fm801 device snd_gusc device snd_hda device snd_hdspe device snd_ich device snd_maestro device snd_maestro3 device snd_mss device snd_neomagic device snd_sb16 device snd_sb8 device snd_sbc device snd_solo device snd_spicds device snd_t4dwave device snd_uaudio device snd_via8233 device snd_via82c686 device snd_vibes # For non-PnP sound cards: hint.pcm.0.at="isa" hint.pcm.0.irq="10" hint.pcm.0.drq="1" hint.pcm.0.flags="0x0" hint.sbc.0.at="isa" hint.sbc.0.port="0x220" hint.sbc.0.irq="5" hint.sbc.0.drq="1" hint.sbc.0.flags="0x15" hint.gusc.0.at="isa" hint.gusc.0.port="0x220" hint.gusc.0.irq="5" hint.gusc.0.drq="1" hint.gusc.0.flags="0x13" # # Following options are intended for debugging/testing purposes: # # SND_DEBUG Enable extra debugging code that includes # sanity checking and possible increase of # verbosity. # # SND_DIAGNOSTIC Similar in a spirit of INVARIANTS/DIAGNOSTIC, # zero tolerance against inconsistencies. # # SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled # in. This options enable most feeder converters # except for 8bit. WARNING: May bloat the kernel. # # SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well. # # SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic # as much as possible (the default trying to # avoid it). Possible slowdown. # # SND_PCM_64 (Only applicable for i386/32bit arch) # Process 32bit samples through 64bit # integer/arithmetic. Slight increase of dynamic # range at a cost of possible slowdown. # # SND_OLDSTEREO Only 2 channels are allowed, effectively # disabling multichannel processing. # options SND_DEBUG options SND_DIAGNOSTIC options SND_FEEDER_MULTIFORMAT options SND_FEEDER_FULL_MULTIFORMAT options SND_FEEDER_RATE_HP options SND_PCM_64 options SND_OLDSTEREO # # Miscellaneous hardware: # # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board # cmx: OmniKey CardMan 4040 pccard smartcard reader device cmx # # The 'bktr' device is a PCI video capture device using the Brooktree # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a # TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator, # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo. # # options OVERRIDE_CARD=xxx # options OVERRIDE_TUNER=xxx # options OVERRIDE_MSP=1 # options OVERRIDE_DBX=1 # These options can be used to override the auto detection # The current values for xxx are found in src/sys/dev/bktr/bktr_card.h # Using sysctl(8) run-time overrides on a per-card basis can be made # # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL # or # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC # Specifies the default video capture mode. # This is required for Dual Crystal (28&35MHz) boards where PAL is used # to prevent hangs during initialization, e.g. VideoLogic Captivator PCI. # # options BKTR_USE_PLL # This is required for PAL or SECAM boards with a 28MHz crystal and no 35MHz # crystal, e.g. some new Bt878 cards. # # options BKTR_GPIO_ACCESS # This enables IOCTLs which give user level access to the GPIO port. # # options BKTR_NO_MSP_RESET # Prevents the MSP34xx reset. Good if you initialize the MSP in another OS first # # options BKTR_430_FX_MODE # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode. # # options BKTR_SIS_VIA_MODE # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is # needed for some old SiS and VIA chipset motherboards. # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset # motherboards and motherboards with bad or incomplete PCI 2.1 support. # As a rough guess, old = before 1998 # # options BKTR_NEW_MSP34XX_DRIVER # Use new, more complete initialization scheme for the msp34* soundchip. # Should fix stereo autodetection if the old driver does only output # mono sound. # # options BKTR_USE_FREEBSD_SMBUS # Compile with FreeBSD SMBus implementation # # Brooktree driver has been ported to the new I2C framework. Thus, # you'll need to have the following 3 lines in the kernel config. # device smbus # device iicbus # device iicbb # device iicsmb # The iic and smb devices are only needed if you want to control other # I2C slaves connected to the external connector of some cards. # device bktr # # PC Card/PCMCIA and Cardbus # # cbb: pci/cardbus bridge implementing YENTA interface # pccard: pccard slots # cardbus: cardbus slots device cbb device pccard device cardbus # # MMC/SD # # mmc MMC/SD bus # mmcsd MMC/SD memory card # sdhci Generic PCI SD Host Controller # device mmc device mmcsd device sdhci # # SMB bus # # System Management Bus support is provided by the 'smbus' device. # Access to the SMBus device is via the 'smb' device (/dev/smb*), # which is a child of the 'smbus' device. # # Supported devices: # smb standard I/O through /dev/smb* # # Supported SMB interfaces: # iicsmb I2C to SMB bridge with any iicbus interface # bktr brooktree848 I2C hardware interface # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit # amdpm AMD 756 Power Management Unit # amdsmb AMD 8111 SMBus 2.0 Controller # nfpm NVIDIA nForce Power Management Unit # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller # ismt Intel SMBus 2.0 controller chips (on Atom S1200, C2000) # device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device viapm device amdpm device amdsmb device nfpm device nfsmb device ismt device smb # SMBus peripheral devices # # jedec_dimm Asset and temperature reporting for DDR3 and DDR4 DIMMs # device jedec_dimm # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported devices: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. # iicoc simple polling driver for OpenCores I2C controller # # Supported interfaces: # bktr brooktree848 I2C software interface # # Other: # iicbb generic I2C bit-banging code (needed by lpbb, bktr) # device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge device iicoc # OpenCores I2C controller support # I2C peripheral devices # device ds1307 # Dallas DS1307 RTC and compatible device ds13rtc # All Dallas/Maxim ds13xx chips device ds1672 # Dallas DS1672 RTC device ds3231 # Dallas DS3231 RTC + temperature device icee # AT24Cxxx and compatible EEPROMs device lm75 # LM75 compatible temperature sensor device nxprtc # NXP RTCs: PCA/PFC212x PCA/PCF85xx device s35390a # Seiko Instruments S-35390A RTC # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. # Multiple devices may be attached to the parallel port, devices # are automatically probed and attached when found. # # Supported devices: # vpo Iomega Zip Drive # Requires SCSI disk support ('scbus' and 'da'), best # performance is achieved with ports in EPP 1.9 mode. # lpt Parallel Printer # plip Parallel network interface # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O # pps Pulse per second Timing Interface # lpbb Philips official parallel port I2C bit-banging interface # pcfclock Parallel port clock driver. # # Supported interfaces: # ppc ISA-bus parallel port interfaces. # options PPC_PROBE_CHIPSET # Enable chipset specific detection # (see flags in ppc(4)) options DEBUG_1284 # IEEE1284 signaling protocol debug options PERIPH_1284 # Makes your computer act as an IEEE1284 # compliant peripheral options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices options VP0_DEBUG # ZIP/ZIP+ debug options LPT_DEBUG # Printer driver debug options PPC_DEBUG # Parallel chipset level debug options PLIP_DEBUG # Parallel network IP interface debug options PCFCLOCK_VERBOSE # Verbose pcfclock driver options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10) device ppc hint.ppc.0.at="isa" hint.ppc.0.irq="7" device ppbus device vpo device lpt device plip device ppi device pps device lpbb device pcfclock # # Etherswitch framework and drivers # # etherswitch The etherswitch(4) framework # miiproxy Proxy device for miibus(4) functionality # # Switch hardware support: # arswitch Atheros switches # ip17x IC+ 17x family switches # rtl8366r Realtek RTL8366 switches # ukswitch Multi-PHY switches # device etherswitch device miiproxy device arswitch device ip17x device rtl8366rb device ukswitch # Kernel BOOTP support options BOOTP # Use BOOTP to obtain IP address/hostname # Requires NFSCL and NFS_ROOT options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info options BOOTP_NFSV3 # Use NFS v3 to NFS mount root options BOOTP_COMPAT # Workaround for broken bootp daemons. options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP options BOOTP_BLOCKSIZE=8192 # Override NFS block size # # Enable software watchdog routines, even if hardware watchdog is present. # By default, software watchdog timer is enabled only if no hardware watchdog # is present. # options SW_WATCHDOG # # Add the software deadlock resolver thread. # options DEADLKRES # # Disable swapping of stack pages. This option removes all # code which actually performs swapping, so it's not possible to turn # it back on at run-time. # # This is sometimes usable for systems which don't have any swap space # (see also sysctl "vm.disable_swapspace_pageouts") # #options NO_SWAPPING # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers # for sendfile(2) that are used to map file VM pages, and normally # default to a quantity that is roughly 16*MAXUSERS+512. You would # typically want about 4 of these for each simultaneous file send. # options NSFBUFS=1024 # # Enable extra debugging code for locks. This stores the filename and # line of whatever acquired the lock in the lock itself, and changes a # number of function calls to pass around the relevant data. This is # not at all useful unless you are debugging lock code. Note that # modules should be recompiled as this option modifies KBI. # options DEBUG_LOCKS ##################################################################### # USB support # UHCI controller device uhci # OHCI controller device ohci # EHCI controller device ehci # XHCI controller device xhci # SL811 Controller #device slhci # General USB code (mandatory for USB) device usb # # USB Double Bulk Pipe devices device udbp # USB Fm Radio device ufm # USB temperature meter device ugold # USB LED device uled # Human Interface Device (anything with buttons and dials) device uhid # USB keyboard device ukbd # USB printer device ulpt # USB mass storage driver (Requires scbus and da) device umass # USB mass storage driver for device-side mode device usfs # USB support for Belkin F5U109 and Magic Control Technology serial adapters device umct # USB modem support device umodem # USB mouse device ums # USB touchpad(s) device atp device wsp # eGalax USB touch screen device uep # Diamond Rio 500 MP3 player device urio # # USB serial support device ucom # USB support for 3G modem cards by Option, Novatel, Huawei and Sierra device u3g # USB support for Technologies ARK3116 based serial adapters device uark # USB support for Belkin F5U103 and compatible serial adapters device ubsa # USB support for serial adapters based on the FT8U100AX and FT8U232AM device uftdi # USB support for some Windows CE based serial communication. device uipaq # USB support for Prolific PL-2303 serial adapters device uplcom # USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters device uslcom # USB Visor and Palm devices device uvisor # USB serial support for DDI pocket's PHS device uvscom # # USB ethernet support device uether # ADMtek USB ethernet. Supports the LinkSys USB100TX, # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus # eval board. device aue # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the # LinkSys USB200M and various other adapters. device axe # ASIX Electronics AX88178A/AX88179 USB 2.0/3.0 gigabit ethernet driver. device axge # # Devices which communicate using Ethernet over USB, particularly # Communication Device Class (CDC) Ethernet specification. Supports # Sharp Zaurus PDAs, some DOCSIS cable modems and so on. device cdce # # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate # and Netmate II, and the Belkin F5U111. device cue # # Kawasaki LSI ethernet. Supports the LinkSys USB10T, # Entrega USB-NET-E45, Peracom Ethernet Adapter, the # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T, # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB # and 2104USB, and the Corega USB-T. device kue # # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX # and the GREEN HOUSE GH-USB100B. device rue # # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC. device udav # # RealTek RTL8152/RTL8153 USB Ethernet driver device ure # # Moschip MCS7730/MCS7840 USB to fast ethernet. Supports the Sitecom LN030. device mos # # HSxPA devices from Option N.V device uhso # Realtek RTL8188SU/RTL8191SU/RTL8192SU wireless driver device rsu # # Ralink Technology RT2501USB/RT2601USB wireless driver device rum # Ralink Technology RT2700U/RT2800U/RT3000U wireless driver device run # # Atheros AR5523 wireless driver device uath # # Conexant/Intersil PrismGT wireless driver device upgt # # Ralink Technology RT2500USB wireless driver device ural # # RNDIS USB ethernet driver device urndis # Realtek RTL8187B/L wireless driver device urtw # # ZyDas ZD1211/ZD1211B wireless driver device zyd # # Sierra USB wireless driver device usie # # debugging options for the USB subsystem # options USB_DEBUG options U3G_DEBUG # options for ukbd: options UKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions UKBD_DFLT_KEYMAP=jp # options for uplcom: options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds # options for uvscom: options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds ##################################################################### # FireWire support device firewire # FireWire bus code device sbp # SCSI over Firewire (Requires scbus and da) device sbp_targ # SBP-2 Target mode (Requires scbus and targ) device fwe # Ethernet over FireWire (non-standard!) device fwip # IP over FireWire (RFC2734 and RFC3146) ##################################################################### # dcons support (Dumb Console Device) device dcons # dumb console driver device dcons_crom # FireWire attachment options DCONS_BUF_SIZE=16384 # buffer size options DCONS_POLL_HZ=100 # polling rate options DCONS_FORCE_CONSOLE=0 # force to be the primary console options DCONS_FORCE_GDB=1 # force to be the gdb device ##################################################################### # crypto subsystem # # This is a port of the OpenBSD crypto framework. Include this when # configuring IPSEC and when you have a h/w crypto device to accelerate # user applications that link to OpenSSL. # # Drivers are ports from OpenBSD with some simple enhancements that have # been fed back to OpenBSD. device crypto # core crypto support # Only install the cryptodev device if you are running tests, or know # specifically why you need it. In most cases, it is not needed and # will make things slower. device cryptodev # /dev/crypto for access to h/w device rndtest # FIPS 140-2 entropy tester device ccr # Chelsio T6 device hifn # Hifn 7951, 7781, etc. options HIFN_DEBUG # enable debugging support: hw.hifn.debug options HIFN_RNDTEST # enable rndtest support device ubsec # Broadcom 5501, 5601, 58xx options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug options UBSEC_RNDTEST # enable rndtest support ##################################################################### # # Embedded system options: # # An embedded system might want to run something other than init. options INIT_PATH=/sbin/init:/rescue/init # Debug options options BUS_DEBUG # enable newbus debugging options DEBUG_VFS_LOCKS # enable VFS lock debugging options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking options IFMEDIA_DEBUG # enable debugging in net/if_media.c # # Verbose SYSINIT # # Make the SYSINIT process performed by mi_startup() verbose. This is very # useful when porting to a new architecture. If DDB is also enabled, this # will print function names instead of addresses. If defined with a value # of zero, the verbose code is compiled-in but disabled by default, and can # be enabled with the debug.verbose_sysinit=1 tunable. options VERBOSE_SYSINIT ##################################################################### # SYSV IPC KERNEL PARAMETERS # # Maximum number of System V semaphores that can be used on the system at # one time. options SEMMNI=11 # Total number of semaphores system wide options SEMMNS=61 # Total number of undo structures in system options SEMMNU=31 # Maximum number of System V semaphores that can be used by a single process # at one time. options SEMMSL=61 # Maximum number of operations that can be outstanding on a single System V # semaphore at one time. options SEMOPM=101 # Maximum number of undo operations that can be outstanding on a single # System V semaphore at one time. options SEMUME=11 # Maximum number of shared memory pages system wide. options SHMALL=1025 # Maximum size, in bytes, of a single System V shared memory region. options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) options SHMMAXPGS=1025 # Minimum size, in bytes, of a single System V shared memory region. options SHMMIN=2 # Maximum number of shared memory regions that can be used on the system # at one time. options SHMMNI=33 # Maximum number of System V shared memory regions that can be attached to # a single process at one time. options SHMSEG=9 # Set the amount of time (in seconds) the system will wait before # rebooting automatically when a kernel panic occurs. If set to (-1), # the system will wait indefinitely until a key is pressed on the # console. options PANIC_REBOOT_WAIT_TIME=16 # Attempt to bypass the buffer cache and put data directly into the # userland buffer for read operation when O_DIRECT flag is set on the # file. Both offset and length of the read operation must be # multiples of the physical media sector size. # options DIRECTIO # Specify a lower limit for the number of swap I/O buffers. They are # (among other things) used when bypassing the buffer cache due to # DIRECTIO kernel option enabled and O_DIRECT flag set on file. # options NSWBUF_MIN=120 ##################################################################### # More undocumented options for linting. # Note that documenting these is not considered an affront. options CAM_DEBUG_DELAY # VFS cluster debugging. options CLUSTERDEBUG options DEBUG # Kernel filelock debugging. options LOCKF_DEBUG # System V compatible message queues # Please note that the values provided here are used to test kernel # building. The defaults in the sources provide almost the same numbers. # MSGSSZ must be a power of 2 between 8 and 1024. options MSGMNB=2049 # Max number of chars in queue options MSGMNI=41 # Max number of message queue identifiers options MSGSEG=2049 # Max number of message segments options MSGSSZ=16 # Size of a message segment options MSGTQL=41 # Max number of messages in system options NBUF=512 # Number of buffer headers options SCSI_NCR_DEBUG options SCSI_NCR_MAX_SYNC=10000 options SCSI_NCR_MAX_WIDE=1 options SCSI_NCR_MYADDR=7 options SC_DEBUG_LEVEL=5 # Syscons debug level options SC_RENDER_DEBUG # syscons rendering debugging options VFS_BIO_DEBUG # VFS buffer I/O debugging options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack options KSTACK_USAGE_PROF # Adaptec Array Controller driver options options AAC_DEBUG # Debugging levels: # 0 - quiet, only emit warnings # 1 - noisy, emit major function # points and things done # 2 - extremely noisy, emit trace # items in loops, etc. # Resource Accounting options RACCT # Resource Limits options RCTL # Yet more undocumented options for linting. # BKTR_ALLOC_PAGES has no effect except to cause warnings, and # BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the # driver still mostly spells this option BROOKTREE_ALLOC_PAGES. ##options BKTR_ALLOC_PAGES=(217*4+1) options BROOKTREE_ALLOC_PAGES=(217*4+1) options MAXFILES=999 # Random number generator # Allow the CSPRNG algorithm to be loaded as a module. #options RANDOM_LOADABLE # Select this to allow high-rate but potentially expensive # harvesting of Slab-Allocator entropy. In very high-rate # situations the value of doing this is dubious at best. options RANDOM_ENABLE_UMA # slab allocator # Select this to allow high-rate but potentially expensive # harvesting of of the m_next pointer in the mbuf. Note that # the m_next pointer is NULL except when receiving > 4K # jumbo frames or sustained bursts by way of LRO. Thus in # the common case it is stirring zero in to the entropy # pool. In cases where it is not NULL it is pointing to one # of a small (in the thousands to 10s of thousands) number # of 256 byte aligned mbufs. Hence it is, even in the best # case, a poor source of entropy. And in the absence of actual # runtime analysis of entropy collection may mislead the user in # to believe that substantially more entropy is being collected # than in fact is - leading to a different class of security # risk. In high packet rate situations ethernet entropy # collection is also very expensive, possibly leading to as # much as a 50% drop in packets received. # This option is present to maintain backwards compatibility # if desired, however it cannot be recommended for use in any # environment. options RANDOM_ENABLE_ETHER # ether_input # Module to enable execution of application via emulators like QEMU options IMAGACT_BINMISC # zlib I/O stream support # This enables support for compressed core dumps. options GZIO # zstd I/O stream support # This enables support for Zstd compressed core dumps. options ZSTDIO # BHND(4) drivers options BHND_LOGLEVEL # Logging threshold level # evdev interface device evdev # input event device support options EVDEV_SUPPORT # evdev support in legacy drivers options EVDEV_DEBUG # enable event debug msgs device uinput # install /dev/uinput cdev options UINPUT_DEBUG # enable uinput debug msgs # Encrypted kernel crash dumps. options EKCD # Serial Peripheral Interface (SPI) support. device spibus # Bus support. device at45d # DataFlash driver device cqspi # device mx25l # SPIFlash driver device n25q # device spigen # Generic access to SPI devices from userland. # Enable legacy /dev/spigenN name aliases for /dev/spigenX.Y devices. options SPIGEN_LEGACY_CDEVNAME # legacy device names for spigen Index: head/sys/conf/files =================================================================== --- head/sys/conf/files (revision 339568) +++ head/sys/conf/files (revision 339569) @@ -1,4965 +1,4963 @@ # $FreeBSD$ # # The long compile-with and dependency lines are required because of # limitations in config: backslash-newline doesn't work in strings, and # dependency lines other than the first are silently ignored. # acpi_quirks.h optional acpi \ dependency "$S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ compile-with "${AWK} -f $S/tools/acpi_quirks2h.awk $S/dev/acpica/acpi_quirks" \ no-obj no-implicit-rule before-depend \ clean "acpi_quirks.h" bhnd_nvram_map.h optional bhnd \ dependency "$S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/tools/nvram_map_gen.awk $S/dev/bhnd/nvram/nvram_map" \ compile-with "sh $S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/nvram/nvram_map -h" \ no-obj no-implicit-rule before-depend \ clean "bhnd_nvram_map.h" bhnd_nvram_map_data.h optional bhnd \ dependency "$S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/tools/nvram_map_gen.awk $S/dev/bhnd/nvram/nvram_map" \ compile-with "sh $S/dev/bhnd/tools/nvram_map_gen.sh $S/dev/bhnd/nvram/nvram_map -d" \ no-obj no-implicit-rule before-depend \ clean "bhnd_nvram_map_data.h" # # The 'fdt_dtb_file' target covers an actual DTB file name, which is derived # from the specified source (DTS) file: .dts -> .dtb # fdt_dtb_file optional fdt fdt_dtb_static \ compile-with "sh -c 'MACHINE=${MACHINE} $S/tools/fdt/make_dtb.sh $S ${FDT_DTS_FILE} ${.CURDIR}'" \ no-obj no-implicit-rule before-depend \ clean "${FDT_DTS_FILE:R}.dtb" fdt_static_dtb.h optional fdt fdt_dtb_static \ compile-with "sh -c 'MACHINE=${MACHINE} $S/tools/fdt/make_dtbh.sh ${FDT_DTS_FILE} ${.CURDIR}'" \ dependency "fdt_dtb_file" \ no-obj no-implicit-rule before-depend \ clean "fdt_static_dtb.h" feeder_eq_gen.h optional sound \ dependency "$S/tools/sound/feeder_eq_mkfilter.awk" \ compile-with "${AWK} -f $S/tools/sound/feeder_eq_mkfilter.awk -- ${FEEDER_EQ_PRESETS} > feeder_eq_gen.h" \ no-obj no-implicit-rule before-depend \ clean "feeder_eq_gen.h" feeder_rate_gen.h optional sound \ dependency "$S/tools/sound/feeder_rate_mkfilter.awk" \ compile-with "${AWK} -f $S/tools/sound/feeder_rate_mkfilter.awk -- ${FEEDER_RATE_PRESETS} > feeder_rate_gen.h" \ no-obj no-implicit-rule before-depend \ clean "feeder_rate_gen.h" snd_fxdiv_gen.h optional sound \ dependency "$S/tools/sound/snd_fxdiv_gen.awk" \ compile-with "${AWK} -f $S/tools/sound/snd_fxdiv_gen.awk -- > snd_fxdiv_gen.h" \ no-obj no-implicit-rule before-depend \ clean "snd_fxdiv_gen.h" miidevs.h optional miibus | mii \ dependency "$S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ compile-with "${AWK} -f $S/tools/miidevs2h.awk $S/dev/mii/miidevs" \ no-obj no-implicit-rule before-depend \ clean "miidevs.h" pccarddevs.h standard \ dependency "$S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ compile-with "${AWK} -f $S/tools/pccarddevs2h.awk $S/dev/pccard/pccarddevs" \ no-obj no-implicit-rule before-depend \ clean "pccarddevs.h" kbdmuxmap.h optional kbdmux_dflt_keymap \ compile-with "kbdcontrol -P ${S:S/sys$/share/}/vt/keymaps -P ${S:S/sys$/share/}/syscons/keymaps -L ${KBDMUX_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > kbdmuxmap.h" \ no-obj no-implicit-rule before-depend \ clean "kbdmuxmap.h" teken_state.h optional sc | vt \ dependency "$S/teken/gensequences $S/teken/sequences" \ compile-with "${AWK} -f $S/teken/gensequences $S/teken/sequences > teken_state.h" \ no-obj no-implicit-rule before-depend \ clean "teken_state.h" usbdevs.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -h" \ no-obj no-implicit-rule before-depend \ clean "usbdevs.h" usbdevs_data.h optional usb \ dependency "$S/tools/usbdevs2h.awk $S/dev/usb/usbdevs" \ compile-with "${AWK} -f $S/tools/usbdevs2h.awk $S/dev/usb/usbdevs -d" \ no-obj no-implicit-rule before-depend \ clean "usbdevs_data.h" cam/cam.c optional scbus cam/cam_compat.c optional scbus cam/cam_iosched.c optional scbus cam/cam_periph.c optional scbus cam/cam_queue.c optional scbus cam/cam_sim.c optional scbus cam/cam_xpt.c optional scbus cam/ata/ata_all.c optional scbus cam/ata/ata_xpt.c optional scbus cam/ata/ata_pmp.c optional scbus cam/nvme/nvme_all.c optional scbus nvme cam/nvme/nvme_da.c optional scbus nvme da cam/nvme/nvme_xpt.c optional scbus nvme cam/scsi/scsi_xpt.c optional scbus cam/scsi/scsi_all.c optional scbus cam/scsi/scsi_cd.c optional cd cam/scsi/scsi_ch.c optional ch cam/ata/ata_da.c optional ada | da cam/ctl/ctl.c optional ctl cam/ctl/ctl_backend.c optional ctl cam/ctl/ctl_backend_block.c optional ctl cam/ctl/ctl_backend_ramdisk.c optional ctl cam/ctl/ctl_cmd_table.c optional ctl cam/ctl/ctl_frontend.c optional ctl cam/ctl/ctl_frontend_cam_sim.c optional ctl cam/ctl/ctl_frontend_ioctl.c optional ctl cam/ctl/ctl_frontend_iscsi.c optional ctl cfiscsi cam/ctl/ctl_ha.c optional ctl cam/ctl/ctl_scsi_all.c optional ctl cam/ctl/ctl_tpc.c optional ctl cam/ctl/ctl_tpc_local.c optional ctl cam/ctl/ctl_error.c optional ctl cam/ctl/ctl_util.c optional ctl cam/ctl/scsi_ctl.c optional ctl cam/mmc/mmc_xpt.c optional scbus mmccam cam/mmc/mmc_da.c optional scbus mmccam da cam/scsi/scsi_da.c optional da cam/scsi/scsi_low.c optional ncv | nsp | stg cam/scsi/scsi_pass.c optional pass cam/scsi/scsi_pt.c optional pt cam/scsi/scsi_sa.c optional sa cam/scsi/scsi_enc.c optional ses cam/scsi/scsi_enc_ses.c optional ses cam/scsi/scsi_enc_safte.c optional ses cam/scsi/scsi_sg.c optional sg cam/scsi/scsi_targ_bh.c optional targbh cam/scsi/scsi_target.c optional targ cam/scsi/smp_all.c optional scbus # shared between zfs and dtrace cddl/compat/opensolaris/kern/opensolaris.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_cmn_err.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_kmem.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_misc.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_proc.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_sunddi.c optional zfs | dtrace compile-with "${CDDL_C}" cddl/compat/opensolaris/kern/opensolaris_taskq.c optional zfs | dtrace compile-with "${CDDL_C}" # zfs specific cddl/compat/opensolaris/kern/opensolaris_acl.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_dtrace.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_kobj.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_kstat.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_lookup.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_policy.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_string.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_sysevent.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_uio.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_vfs.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_vm.c optional zfs compile-with "${ZFS_C}" cddl/compat/opensolaris/kern/opensolaris_zone.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/acl/acl_common.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/avl/avl.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/nvpair/opensolaris_fnvpair.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/nvpair/opensolaris_nvpair.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/nvpair/opensolaris_nvpair_alloc_fixed.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/unicode/u8_textprep.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfeature_common.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_comutil.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_deleg.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_fletcher.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_ioctl_compat.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_namecheck.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zfs_prop.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zpool_prop.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/common/zfs/zprop_common.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/vnode.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/abd.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/aggsum.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/blkptr.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/bplist.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/bpobj.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/bptree.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/bqueue.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/cityhash.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf_stats.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/ddt.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/ddt_zap.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_diff.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_object.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_send.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_traverse.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_tx.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_zfetch.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dnode.c optional zfs compile-with "${ZFS_C}" \ warning "kernel contains CDDL licensed ZFS filesystem" cddl/contrib/opensolaris/uts/common/fs/zfs/dnode_sync.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_bookmark.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deadlist.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deleg.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_destroy.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_pool.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_scan.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_userhold.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_synctask.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/gzip.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lz4.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lzjb.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/multilist.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/range_tree.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/refcount.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/rrwlock.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/sha256.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/skein_zfs.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_checkpoint.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_config.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_errlog.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_history.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/spa_misc.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/space_map.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/space_reftree.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/trim_map.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/txg.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/uberblock.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/unique.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_cache.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_file.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_indirect.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_indirect_births.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_indirect_mapping.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_initialize.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_label.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_mirror.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_missing.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_queue.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_raidz.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_removal.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_root.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp_get.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp_global.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp_iter.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zcp_synctask.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfeature.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_acl.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_byteswap.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ctldir.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_debug.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_dir.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_fm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_fuid.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_log.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_onexit.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_replay.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_rlock.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_sa.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vnops.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_znode.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zil.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zio.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zio_checksum.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zio_compress.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zio_inject.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zle.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zrlock.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zthr.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/zvol.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/callb.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/fm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/list.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/nvpair_alloc_system.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/adler32.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/deflate.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/inffast.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/inflate.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/inftrees.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/trees.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/zmod.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/zmod/zutil.c optional zfs compile-with "${ZFS_C}" # zfs lua support cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lapi.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lauxlib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lbaselib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lbitlib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lcode.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lcompat.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lcorolib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lctype.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ldebug.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ldo.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ldump.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lfunc.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lgc.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/llex.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lmem.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lobject.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lopcodes.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lparser.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lstate.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lstring.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lstrlib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ltable.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ltablib.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/ltm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lundump.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lvm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lzio.c optional zfs compile-with "${ZFS_C}" # dtrace specific cddl/contrib/opensolaris/uts/common/dtrace/dtrace.c optional dtrace compile-with "${DTRACE_C}" \ warning "kernel contains CDDL licensed DTRACE" cddl/contrib/opensolaris/uts/common/dtrace/dtrace_xoroshiro128_plus.c optional dtrace compile-with "${DTRACE_C}" cddl/dev/dtmalloc/dtmalloc.c optional dtmalloc | dtraceall compile-with "${CDDL_C}" cddl/dev/profile/profile.c optional dtrace_profile | dtraceall compile-with "${CDDL_C}" cddl/dev/sdt/sdt.c optional dtrace_sdt | dtraceall compile-with "${CDDL_C}" cddl/dev/fbt/fbt.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}" cddl/dev/systrace/systrace.c optional dtrace_systrace | dtraceall compile-with "${CDDL_C}" cddl/dev/prototype.c optional dtrace_prototype | dtraceall compile-with "${CDDL_C}" fs/nfsclient/nfs_clkdtrace.c optional dtnfscl nfscl | dtraceall nfscl compile-with "${CDDL_C}" compat/cloudabi/cloudabi_clock.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_errno.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_fd.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_file.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_futex.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_mem.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_proc.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_random.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_sock.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_thread.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi/cloudabi_vdso.c optional compat_cloudabi32 | compat_cloudabi64 compat/cloudabi32/cloudabi32_fd.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_module.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_poll.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_sock.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_syscalls.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_sysent.c optional compat_cloudabi32 compat/cloudabi32/cloudabi32_thread.c optional compat_cloudabi32 compat/cloudabi64/cloudabi64_fd.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_module.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_poll.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_sock.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_syscalls.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_sysent.c optional compat_cloudabi64 compat/cloudabi64/cloudabi64_thread.c optional compat_cloudabi64 compat/freebsd32/freebsd32_capability.c optional compat_freebsd32 compat/freebsd32/freebsd32_ioctl.c optional compat_freebsd32 compat/freebsd32/freebsd32_misc.c optional compat_freebsd32 compat/freebsd32/freebsd32_syscalls.c optional compat_freebsd32 compat/freebsd32/freebsd32_sysent.c optional compat_freebsd32 contrib/ck/src/ck_array.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_centralized.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_combining.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_dissemination.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_mcs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_barrier_tournament.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_epoch.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_hp.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_hs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_ht.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/ck/src/ck_rhs.c standard compile-with "${NORMAL_C} -I$S/contrib/ck/include" contrib/dev/acpica/common/ahids.c optional acpi acpi_debug contrib/dev/acpica/common/ahuuids.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbcmds.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbconvert.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbdisply.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbexec.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbhistry.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbinput.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbmethod.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbnames.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbobject.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbstats.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbtest.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbutils.c optional acpi acpi_debug contrib/dev/acpica/components/debugger/dbxface.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmbuffer.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmcstyle.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmdeferred.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmnames.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmopcode.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrc.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcl.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcl2.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmresrcs.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmutils.c optional acpi acpi_debug contrib/dev/acpica/components/disassembler/dmwalk.c optional acpi acpi_debug contrib/dev/acpica/components/dispatcher/dsargs.c optional acpi contrib/dev/acpica/components/dispatcher/dscontrol.c optional acpi contrib/dev/acpica/components/dispatcher/dsdebug.c optional acpi contrib/dev/acpica/components/dispatcher/dsfield.c optional acpi contrib/dev/acpica/components/dispatcher/dsinit.c optional acpi contrib/dev/acpica/components/dispatcher/dsmethod.c optional acpi contrib/dev/acpica/components/dispatcher/dsmthdat.c optional acpi contrib/dev/acpica/components/dispatcher/dsobject.c optional acpi contrib/dev/acpica/components/dispatcher/dsopcode.c optional acpi contrib/dev/acpica/components/dispatcher/dspkginit.c optional acpi contrib/dev/acpica/components/dispatcher/dsutils.c optional acpi contrib/dev/acpica/components/dispatcher/dswexec.c optional acpi contrib/dev/acpica/components/dispatcher/dswload.c optional acpi contrib/dev/acpica/components/dispatcher/dswload2.c optional acpi contrib/dev/acpica/components/dispatcher/dswscope.c optional acpi contrib/dev/acpica/components/dispatcher/dswstate.c optional acpi contrib/dev/acpica/components/events/evevent.c optional acpi contrib/dev/acpica/components/events/evglock.c optional acpi contrib/dev/acpica/components/events/evgpe.c optional acpi contrib/dev/acpica/components/events/evgpeblk.c optional acpi contrib/dev/acpica/components/events/evgpeinit.c optional acpi contrib/dev/acpica/components/events/evgpeutil.c optional acpi contrib/dev/acpica/components/events/evhandler.c optional acpi contrib/dev/acpica/components/events/evmisc.c optional acpi contrib/dev/acpica/components/events/evregion.c optional acpi contrib/dev/acpica/components/events/evrgnini.c optional acpi contrib/dev/acpica/components/events/evsci.c optional acpi contrib/dev/acpica/components/events/evxface.c optional acpi contrib/dev/acpica/components/events/evxfevnt.c optional acpi contrib/dev/acpica/components/events/evxfgpe.c optional acpi contrib/dev/acpica/components/events/evxfregn.c optional acpi contrib/dev/acpica/components/executer/exconcat.c optional acpi contrib/dev/acpica/components/executer/exconfig.c optional acpi contrib/dev/acpica/components/executer/exconvrt.c optional acpi contrib/dev/acpica/components/executer/excreate.c optional acpi contrib/dev/acpica/components/executer/exdebug.c optional acpi contrib/dev/acpica/components/executer/exdump.c optional acpi contrib/dev/acpica/components/executer/exfield.c optional acpi contrib/dev/acpica/components/executer/exfldio.c optional acpi contrib/dev/acpica/components/executer/exmisc.c optional acpi contrib/dev/acpica/components/executer/exmutex.c optional acpi contrib/dev/acpica/components/executer/exnames.c optional acpi contrib/dev/acpica/components/executer/exoparg1.c optional acpi contrib/dev/acpica/components/executer/exoparg2.c optional acpi contrib/dev/acpica/components/executer/exoparg3.c optional acpi contrib/dev/acpica/components/executer/exoparg6.c optional acpi contrib/dev/acpica/components/executer/exprep.c optional acpi contrib/dev/acpica/components/executer/exregion.c optional acpi contrib/dev/acpica/components/executer/exresnte.c optional acpi contrib/dev/acpica/components/executer/exresolv.c optional acpi contrib/dev/acpica/components/executer/exresop.c optional acpi contrib/dev/acpica/components/executer/exserial.c optional acpi contrib/dev/acpica/components/executer/exstore.c optional acpi contrib/dev/acpica/components/executer/exstoren.c optional acpi contrib/dev/acpica/components/executer/exstorob.c optional acpi contrib/dev/acpica/components/executer/exsystem.c optional acpi contrib/dev/acpica/components/executer/extrace.c optional acpi contrib/dev/acpica/components/executer/exutils.c optional acpi contrib/dev/acpica/components/hardware/hwacpi.c optional acpi contrib/dev/acpica/components/hardware/hwesleep.c optional acpi contrib/dev/acpica/components/hardware/hwgpe.c optional acpi contrib/dev/acpica/components/hardware/hwpci.c optional acpi contrib/dev/acpica/components/hardware/hwregs.c optional acpi contrib/dev/acpica/components/hardware/hwsleep.c optional acpi contrib/dev/acpica/components/hardware/hwtimer.c optional acpi contrib/dev/acpica/components/hardware/hwvalid.c optional acpi contrib/dev/acpica/components/hardware/hwxface.c optional acpi contrib/dev/acpica/components/hardware/hwxfsleep.c optional acpi contrib/dev/acpica/components/namespace/nsaccess.c optional acpi contrib/dev/acpica/components/namespace/nsalloc.c optional acpi contrib/dev/acpica/components/namespace/nsarguments.c optional acpi contrib/dev/acpica/components/namespace/nsconvert.c optional acpi contrib/dev/acpica/components/namespace/nsdump.c optional acpi contrib/dev/acpica/components/namespace/nseval.c optional acpi contrib/dev/acpica/components/namespace/nsinit.c optional acpi contrib/dev/acpica/components/namespace/nsload.c optional acpi contrib/dev/acpica/components/namespace/nsnames.c optional acpi contrib/dev/acpica/components/namespace/nsobject.c optional acpi contrib/dev/acpica/components/namespace/nsparse.c optional acpi contrib/dev/acpica/components/namespace/nspredef.c optional acpi contrib/dev/acpica/components/namespace/nsprepkg.c optional acpi contrib/dev/acpica/components/namespace/nsrepair.c optional acpi contrib/dev/acpica/components/namespace/nsrepair2.c optional acpi contrib/dev/acpica/components/namespace/nssearch.c optional acpi contrib/dev/acpica/components/namespace/nsutils.c optional acpi contrib/dev/acpica/components/namespace/nswalk.c optional acpi contrib/dev/acpica/components/namespace/nsxfeval.c optional acpi contrib/dev/acpica/components/namespace/nsxfname.c optional acpi contrib/dev/acpica/components/namespace/nsxfobj.c optional acpi contrib/dev/acpica/components/parser/psargs.c optional acpi contrib/dev/acpica/components/parser/psloop.c optional acpi contrib/dev/acpica/components/parser/psobject.c optional acpi contrib/dev/acpica/components/parser/psopcode.c optional acpi contrib/dev/acpica/components/parser/psopinfo.c optional acpi contrib/dev/acpica/components/parser/psparse.c optional acpi contrib/dev/acpica/components/parser/psscope.c optional acpi contrib/dev/acpica/components/parser/pstree.c optional acpi contrib/dev/acpica/components/parser/psutils.c optional acpi contrib/dev/acpica/components/parser/pswalk.c optional acpi contrib/dev/acpica/components/parser/psxface.c optional acpi contrib/dev/acpica/components/resources/rsaddr.c optional acpi contrib/dev/acpica/components/resources/rscalc.c optional acpi contrib/dev/acpica/components/resources/rscreate.c optional acpi contrib/dev/acpica/components/resources/rsdump.c optional acpi acpi_debug contrib/dev/acpica/components/resources/rsdumpinfo.c optional acpi contrib/dev/acpica/components/resources/rsinfo.c optional acpi contrib/dev/acpica/components/resources/rsio.c optional acpi contrib/dev/acpica/components/resources/rsirq.c optional acpi contrib/dev/acpica/components/resources/rslist.c optional acpi contrib/dev/acpica/components/resources/rsmemory.c optional acpi contrib/dev/acpica/components/resources/rsmisc.c optional acpi contrib/dev/acpica/components/resources/rsserial.c optional acpi contrib/dev/acpica/components/resources/rsutils.c optional acpi contrib/dev/acpica/components/resources/rsxface.c optional acpi contrib/dev/acpica/components/tables/tbdata.c optional acpi contrib/dev/acpica/components/tables/tbfadt.c optional acpi contrib/dev/acpica/components/tables/tbfind.c optional acpi contrib/dev/acpica/components/tables/tbinstal.c optional acpi contrib/dev/acpica/components/tables/tbprint.c optional acpi contrib/dev/acpica/components/tables/tbutils.c optional acpi contrib/dev/acpica/components/tables/tbxface.c optional acpi contrib/dev/acpica/components/tables/tbxfload.c optional acpi contrib/dev/acpica/components/tables/tbxfroot.c optional acpi contrib/dev/acpica/components/utilities/utaddress.c optional acpi contrib/dev/acpica/components/utilities/utalloc.c optional acpi contrib/dev/acpica/components/utilities/utascii.c optional acpi contrib/dev/acpica/components/utilities/utbuffer.c optional acpi contrib/dev/acpica/components/utilities/utcache.c optional acpi contrib/dev/acpica/components/utilities/utcopy.c optional acpi contrib/dev/acpica/components/utilities/utdebug.c optional acpi contrib/dev/acpica/components/utilities/utdecode.c optional acpi contrib/dev/acpica/components/utilities/utdelete.c optional acpi contrib/dev/acpica/components/utilities/uterror.c optional acpi contrib/dev/acpica/components/utilities/uteval.c optional acpi contrib/dev/acpica/components/utilities/utexcep.c optional acpi contrib/dev/acpica/components/utilities/utglobal.c optional acpi contrib/dev/acpica/components/utilities/uthex.c optional acpi contrib/dev/acpica/components/utilities/utids.c optional acpi contrib/dev/acpica/components/utilities/utinit.c optional acpi contrib/dev/acpica/components/utilities/utlock.c optional acpi contrib/dev/acpica/components/utilities/utmath.c optional acpi contrib/dev/acpica/components/utilities/utmisc.c optional acpi contrib/dev/acpica/components/utilities/utmutex.c optional acpi contrib/dev/acpica/components/utilities/utnonansi.c optional acpi contrib/dev/acpica/components/utilities/utobject.c optional acpi contrib/dev/acpica/components/utilities/utosi.c optional acpi contrib/dev/acpica/components/utilities/utownerid.c optional acpi contrib/dev/acpica/components/utilities/utpredef.c optional acpi contrib/dev/acpica/components/utilities/utresdecode.c optional acpi acpi_debug contrib/dev/acpica/components/utilities/utresrc.c optional acpi contrib/dev/acpica/components/utilities/utstate.c optional acpi contrib/dev/acpica/components/utilities/utstring.c optional acpi contrib/dev/acpica/components/utilities/utstrsuppt.c optional acpi contrib/dev/acpica/components/utilities/utstrtoul64.c optional acpi contrib/dev/acpica/components/utilities/utuuid.c optional acpi acpi_debug contrib/dev/acpica/components/utilities/utxface.c optional acpi contrib/dev/acpica/components/utilities/utxferror.c optional acpi contrib/dev/acpica/components/utilities/utxfinit.c optional acpi contrib/dev/acpica/os_specific/service_layers/osgendbg.c optional acpi acpi_debug contrib/ipfilter/netinet/fil.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_auth.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_fil_freebsd.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_frag.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_log.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_nat.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_proxy.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_state.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_lookup.c optional ipfilter inet \ compile-with "${NORMAL_C} ${NO_WSELF_ASSIGN} -Wno-unused -Wno-error -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_pool.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_htable.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter ${NO_WTAUTOLOGICAL_POINTER_COMPARE}" contrib/ipfilter/netinet/ip_sync.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/mlfk_ipl.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_nat6.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_rules.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_scan.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/ip_dstlist.c optional ipfilter inet \ compile-with "${NORMAL_C} -Wno-unused -I$S/contrib/ipfilter" contrib/ipfilter/netinet/radix_ipf.c optional ipfilter inet \ compile-with "${NORMAL_C} -I$S/contrib/ipfilter" contrib/libfdt/fdt.c optional fdt contrib/libfdt/fdt_ro.c optional fdt contrib/libfdt/fdt_rw.c optional fdt contrib/libfdt/fdt_strerror.c optional fdt contrib/libfdt/fdt_sw.c optional fdt contrib/libfdt/fdt_wip.c optional fdt contrib/libnv/cnvlist.c standard contrib/libnv/dnvlist.c standard contrib/libnv/nvlist.c standard contrib/libnv/nvpair.c standard contrib/ngatm/netnatm/api/cc_conn.c optional ngatm_ccatm \ compile-with "${NORMAL_C_NOWERROR} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_data.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_dump.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_port.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_sig.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/cc_user.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/api/unisap.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/straddr.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/misc/unimsg_common.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/traffic.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_ie.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/msg/uni_msg.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/saal/saal_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_call.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_coord.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_party.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_print.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_reset.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_unimsgcpy.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" contrib/ngatm/netnatm/sig/sig_verify.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" # Zstd contrib/zstd/lib/freebsd/zstd_kmalloc.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/zstd_common.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/fse_decompress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/entropy_common.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/error_private.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/common/xxhash.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/fse_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/huf_compress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_double_fast.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_fast.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_lazy.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_ldm.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/compress/zstd_opt.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/decompress/zstd_decompress.c optional zstdio compile-with ${ZSTD_C} contrib/zstd/lib/decompress/huf_decompress.c optional zstdio compile-with ${ZSTD_C} # Blake 2 contrib/libb2/blake2b-ref.c optional crypto | ipsec | ipsec_support \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual -DSUFFIX=_ref -Wno-unused-function" contrib/libb2/blake2s-ref.c optional crypto | ipsec | ipsec_support \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual -DSUFFIX=_ref -Wno-unused-function" crypto/blake2/blake2-sw.c optional crypto | ipsec | ipsec_support \ compile-with "${NORMAL_C} -I$S/crypto/blake2 -Wno-cast-qual" crypto/blowfish/bf_ecb.c optional ipsec | ipsec_support crypto/blowfish/bf_skey.c optional crypto | ipsec | ipsec_support crypto/camellia/camellia.c optional crypto | ipsec | ipsec_support crypto/camellia/camellia-api.c optional crypto | ipsec | ipsec_support crypto/chacha20/chacha.c optional crypto | ipsec | ipsec_support crypto/chacha20/chacha-sw.c optional crypto | ipsec | ipsec_support crypto/des/des_ecb.c optional crypto | ipsec | ipsec_support | netsmb crypto/des/des_setkey.c optional crypto | ipsec | ipsec_support | netsmb crypto/rc4/rc4.c optional netgraph_mppc_encryption | kgssapi crypto/rijndael/rijndael-alg-fst.c optional crypto | ekcd | geom_bde | \ ipsec | ipsec_support | random !random_loadable | wlan_ccmp crypto/rijndael/rijndael-api-fst.c optional ekcd | geom_bde | random !random_loadable crypto/rijndael/rijndael-api.c optional crypto | ipsec | ipsec_support | \ wlan_ccmp crypto/sha1.c optional carp | crypto | ipsec | \ ipsec_support | netgraph_mppc_encryption | sctp crypto/sha2/sha256c.c optional crypto | ekcd | geom_bde | ipsec | \ ipsec_support | random !random_loadable | sctp | zfs crypto/sha2/sha512c.c optional crypto | geom_bde | ipsec | \ ipsec_support | zfs crypto/skein/skein.c optional crypto | zfs crypto/skein/skein_block.c optional crypto | zfs crypto/siphash/siphash.c optional inet | inet6 crypto/siphash/siphash_test.c optional inet | inet6 ddb/db_access.c optional ddb ddb/db_break.c optional ddb ddb/db_capture.c optional ddb ddb/db_command.c optional ddb ddb/db_examine.c optional ddb ddb/db_expr.c optional ddb ddb/db_input.c optional ddb ddb/db_lex.c optional ddb ddb/db_main.c optional ddb ddb/db_output.c optional ddb ddb/db_print.c optional ddb ddb/db_ps.c optional ddb ddb/db_run.c optional ddb ddb/db_script.c optional ddb ddb/db_sym.c optional ddb ddb/db_thread.c optional ddb ddb/db_textdump.c optional ddb ddb/db_variables.c optional ddb ddb/db_watch.c optional ddb ddb/db_write_cmd.c optional ddb dev/aac/aac.c optional aac dev/aac/aac_cam.c optional aacp aac dev/aac/aac_debug.c optional aac dev/aac/aac_disk.c optional aac dev/aac/aac_linux.c optional aac compat_linux dev/aac/aac_pci.c optional aac pci dev/aacraid/aacraid.c optional aacraid dev/aacraid/aacraid_cam.c optional aacraid scbus dev/aacraid/aacraid_debug.c optional aacraid dev/aacraid/aacraid_linux.c optional aacraid compat_linux dev/aacraid/aacraid_pci.c optional aacraid pci dev/acpi_support/acpi_wmi.c optional acpi_wmi acpi dev/acpi_support/acpi_asus.c optional acpi_asus acpi dev/acpi_support/acpi_asus_wmi.c optional acpi_asus_wmi acpi dev/acpi_support/acpi_fujitsu.c optional acpi_fujitsu acpi dev/acpi_support/acpi_hp.c optional acpi_hp acpi dev/acpi_support/acpi_ibm.c optional acpi_ibm acpi dev/acpi_support/acpi_panasonic.c optional acpi_panasonic acpi dev/acpi_support/acpi_sony.c optional acpi_sony acpi dev/acpi_support/acpi_toshiba.c optional acpi_toshiba acpi dev/acpi_support/atk0110.c optional aibs acpi dev/acpica/Osd/OsdDebug.c optional acpi dev/acpica/Osd/OsdHardware.c optional acpi dev/acpica/Osd/OsdInterrupt.c optional acpi dev/acpica/Osd/OsdMemory.c optional acpi dev/acpica/Osd/OsdSchedule.c optional acpi dev/acpica/Osd/OsdStream.c optional acpi dev/acpica/Osd/OsdSynch.c optional acpi dev/acpica/Osd/OsdTable.c optional acpi dev/acpica/acpi.c optional acpi dev/acpica/acpi_acad.c optional acpi dev/acpica/acpi_battery.c optional acpi dev/acpica/acpi_button.c optional acpi dev/acpica/acpi_cmbat.c optional acpi dev/acpica/acpi_cpu.c optional acpi dev/acpica/acpi_ec.c optional acpi dev/acpica/acpi_isab.c optional acpi isa dev/acpica/acpi_lid.c optional acpi dev/acpica/acpi_package.c optional acpi dev/acpica/acpi_perf.c optional acpi dev/acpica/acpi_powerres.c optional acpi dev/acpica/acpi_quirk.c optional acpi dev/acpica/acpi_resource.c optional acpi dev/acpica/acpi_container.c optional acpi dev/acpica/acpi_smbat.c optional acpi dev/acpica/acpi_thermal.c optional acpi dev/acpica/acpi_throttle.c optional acpi dev/acpica/acpi_video.c optional acpi_video acpi dev/acpica/acpi_dock.c optional acpi_dock acpi dev/adlink/adlink.c optional adlink dev/ae/if_ae.c optional ae pci dev/age/if_age.c optional age pci dev/agp/agp.c optional agp pci dev/agp/agp_if.m optional agp pci dev/ahci/ahci.c optional ahci dev/ahci/ahciem.c optional ahci dev/ahci/ahci_pci.c optional ahci pci dev/aic7xxx/ahc_isa.c optional ahc isa dev/aic7xxx/ahc_pci.c optional ahc pci \ compile-with "${NORMAL_C} ${NO_WCONSTANT_CONVERSION}" dev/aic7xxx/ahd_pci.c optional ahd pci \ compile-with "${NORMAL_C} ${NO_WCONSTANT_CONVERSION}" dev/aic7xxx/aic7770.c optional ahc dev/aic7xxx/aic79xx.c optional ahd pci dev/aic7xxx/aic79xx_osm.c optional ahd pci dev/aic7xxx/aic79xx_pci.c optional ahd pci dev/aic7xxx/aic79xx_reg_print.c optional ahd pci ahd_reg_pretty_print dev/aic7xxx/aic7xxx.c optional ahc dev/aic7xxx/aic7xxx_93cx6.c optional ahc dev/aic7xxx/aic7xxx_osm.c optional ahc dev/aic7xxx/aic7xxx_pci.c optional ahc pci dev/aic7xxx/aic7xxx_reg_print.c optional ahc ahc_reg_pretty_print dev/al_eth/al_eth.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" dev/al_eth/al_init_eth_lm.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" dev/al_eth/al_init_eth_kr.c optional al_eth fdt \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_iofic.c optional al_iofic \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_serdes_25g.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_serdes_hssp.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_config.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_debug.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_iofic.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_hal_udma_main.c optional al_udma \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/al_serdes.c optional al_serdes \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/eth/al_hal_eth_kr.c optional al_eth \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" contrib/alpine-hal/eth/al_hal_eth_main.c optional al_eth \ no-depend \ compile-with "${CC} -c -o ${.TARGET} ${CFLAGS} -I$S/contrib/alpine-hal -I$S/contrib/alpine-hal/eth ${PROF} ${.IMPSRC}" dev/alc/if_alc.c optional alc pci dev/ale/if_ale.c optional ale pci dev/alpm/alpm.c optional alpm pci dev/altera/avgen/altera_avgen.c optional altera_avgen dev/altera/avgen/altera_avgen_fdt.c optional altera_avgen fdt dev/altera/avgen/altera_avgen_nexus.c optional altera_avgen dev/altera/msgdma/msgdma.c optional altera_msgdma xdma dev/altera/sdcard/altera_sdcard.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_disk.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_io.c optional altera_sdcard dev/altera/sdcard/altera_sdcard_fdt.c optional altera_sdcard fdt dev/altera/sdcard/altera_sdcard_nexus.c optional altera_sdcard dev/altera/softdma/softdma.c optional altera_softdma xdma fdt dev/altera/pio/pio.c optional altera_pio dev/altera/pio/pio_if.m optional altera_pio dev/amdpm/amdpm.c optional amdpm pci | nfpm pci dev/amdsmb/amdsmb.c optional amdsmb pci dev/amr/amr.c optional amr dev/amr/amr_cam.c optional amrp amr dev/amr/amr_disk.c optional amr dev/amr/amr_linux.c optional amr compat_linux dev/amr/amr_pci.c optional amr pci dev/an/if_an.c optional an dev/an/if_an_isa.c optional an isa dev/an/if_an_pccard.c optional an pccard dev/an/if_an_pci.c optional an pci # dev/ata/ata_if.m optional ata | atacore dev/ata/ata-all.c optional ata | atacore dev/ata/ata-dma.c optional ata | atacore dev/ata/ata-lowlevel.c optional ata | atacore dev/ata/ata-sata.c optional ata | atacore dev/ata/ata-card.c optional ata pccard | atapccard dev/ata/ata-isa.c optional ata isa | ataisa dev/ata/ata-pci.c optional ata pci | atapci dev/ata/chipsets/ata-acard.c optional ata pci | ataacard dev/ata/chipsets/ata-acerlabs.c optional ata pci | ataacerlabs dev/ata/chipsets/ata-amd.c optional ata pci | ataamd dev/ata/chipsets/ata-ati.c optional ata pci | ataati dev/ata/chipsets/ata-cenatek.c optional ata pci | atacenatek dev/ata/chipsets/ata-cypress.c optional ata pci | atacypress dev/ata/chipsets/ata-cyrix.c optional ata pci | atacyrix dev/ata/chipsets/ata-highpoint.c optional ata pci | atahighpoint dev/ata/chipsets/ata-intel.c optional ata pci | ataintel dev/ata/chipsets/ata-ite.c optional ata pci | ataite dev/ata/chipsets/ata-jmicron.c optional ata pci | atajmicron dev/ata/chipsets/ata-marvell.c optional ata pci | atamarvell dev/ata/chipsets/ata-micron.c optional ata pci | atamicron dev/ata/chipsets/ata-national.c optional ata pci | atanational dev/ata/chipsets/ata-netcell.c optional ata pci | atanetcell dev/ata/chipsets/ata-nvidia.c optional ata pci | atanvidia dev/ata/chipsets/ata-promise.c optional ata pci | atapromise dev/ata/chipsets/ata-serverworks.c optional ata pci | ataserverworks dev/ata/chipsets/ata-siliconimage.c optional ata pci | atasiliconimage | ataati dev/ata/chipsets/ata-sis.c optional ata pci | atasis dev/ata/chipsets/ata-via.c optional ata pci | atavia # dev/ath/if_ath_pci.c optional ath_pci pci \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/if_ath_ahb.c optional ath_ahb \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/if_ath.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_alq.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_beacon.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_btcoex.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_btcoex_mci.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_debug.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_descdma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_keycache.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_ioctl.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_led.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_lna_div.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx_edma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tx_ht.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_tdma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_sysctl.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_rx.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_rx_edma.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/if_ath_spectral.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ah_osdep.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/ath/ath_hal/ah.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v1.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v3.c optional ath_hal | ath_ar5211 | ath_ar5212 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v14.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_v4k.c \ optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_eeprom_9287.c \ optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_hal/ah_regdomain.c optional ath \ compile-with "${NORMAL_C} ${NO_WSHIFT_COUNT_NEGATIVE} ${NO_WSHIFT_COUNT_OVERFLOW} -I$S/dev/ath" # ar5210 dev/ath/ath_hal/ar5210/ar5210_attach.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_beacon.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_interrupts.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_keycache.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_misc.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_phy.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_power.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_recv.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_reset.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5210/ar5210_xmit.c optional ath_hal | ath_ar5210 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5211 dev/ath/ath_hal/ar5211/ar5211_attach.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_beacon.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_interrupts.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_keycache.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_misc.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_phy.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_power.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_recv.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_reset.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5211/ar5211_xmit.c optional ath_hal | ath_ar5211 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5212 dev/ath/ath_hal/ar5212/ar5212_ani.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_attach.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_beacon.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_eeprom.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_gpio.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_interrupts.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_keycache.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_misc.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_phy.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_power.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_recv.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_reset.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_rfgain.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5212_xmit.c \ optional ath_hal | ath_ar5212 | ath_ar5416 | ath_ar9160 | ath_ar9280 | \ ath_ar9285 ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar5416 (depends on ar5212) dev/ath/ath_hal/ar5416/ar5416_ani.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_attach.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_beacon.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_btcoex.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_iq.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_adcgain.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_cal_adcdc.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_eeprom.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_gpio.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_interrupts.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_keycache.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_misc.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_phy.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_power.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_radar.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_recv.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_reset.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_spectral.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar5416_xmit.c \ optional ath_hal | ath_ar5416 | ath_ar9160 | ath_ar9280 | ath_ar9285 | \ ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9130 (depends upon ar5416) - also requires AH_SUPPORT_AR9130 # # Since this is an embedded MAC SoC, there's no need to compile it into the # default HAL. dev/ath/ath_hal/ar9001/ar9130_attach.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9001/ar9130_phy.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9001/ar9130_eeprom.c optional ath_ar9130 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9160 (depends on ar5416) dev/ath/ath_hal/ar9001/ar9160_attach.c optional ath_hal | ath_ar9160 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9280 (depends on ar5416) dev/ath/ath_hal/ar9002/ar9280_attach.c optional ath_hal | ath_ar9280 | \ ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9280_olc.c optional ath_hal | ath_ar9280 | \ ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9285 (depends on ar5416 and ar9280) dev/ath/ath_hal/ar9002/ar9285_attach.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_btcoex.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_reset.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_cal.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_phy.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285_diversity.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9287 (depends on ar5416) dev/ath/ath_hal/ar9002/ar9287_attach.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_reset.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_cal.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287_olc.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ar9300 contrib/dev/ath/ath_hal/ar9300/ar9300_ani.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_attach.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_beacon.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_eeprom.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal ${NO_WCONSTANT_CONVERSION}" contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_gpio.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_interrupts.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_keycache.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_mci.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_misc.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_paprd.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_phy.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_power.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_radar.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_radio.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_recv.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_recv_ds.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_reset.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal ${NO_WSOMETIMES_UNINITIALIZED} -Wno-unused-function" contrib/dev/ath/ath_hal/ar9300/ar9300_stub.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_stub_funcs.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_spectral.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_timer.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_xmit.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" contrib/dev/ath/ath_hal/ar9300/ar9300_xmit_ds.c optional ath_hal | ath_ar9300 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal -I$S/contrib/dev/ath/ath_hal" # rf backends dev/ath/ath_hal/ar5212/ar2316.c optional ath_rf2316 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2317.c optional ath_rf2317 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2413.c optional ath_hal | ath_rf2413 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar2425.c optional ath_hal | ath_rf2425 | ath_rf2417 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5111.c optional ath_hal | ath_rf5111 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5112.c optional ath_hal | ath_rf5112 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5212/ar5413.c optional ath_hal | ath_rf5413 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar5416/ar2133.c optional ath_hal | ath_ar5416 | \ ath_ar9130 | ath_ar9160 | ath_ar9280 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9280.c optional ath_hal | ath_ar9280 | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9285.c optional ath_hal | ath_ar9285 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" dev/ath/ath_hal/ar9002/ar9287.c optional ath_hal | ath_ar9287 \ compile-with "${NORMAL_C} -I$S/dev/ath -I$S/dev/ath/ath_hal" # ath rate control algorithms dev/ath/ath_rate/amrr/amrr.c optional ath_rate_amrr \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/onoe/onoe.c optional ath_rate_onoe \ compile-with "${NORMAL_C} -I$S/dev/ath" dev/ath/ath_rate/sample/sample.c optional ath_rate_sample \ compile-with "${NORMAL_C} -I$S/dev/ath" # ath DFS modules dev/ath/ath_dfs/null/dfs_null.c optional ath \ compile-with "${NORMAL_C} -I$S/dev/ath" # dev/bce/if_bce.c optional bce dev/bfe/if_bfe.c optional bfe dev/bge/if_bge.c optional bge dev/bhnd/bhnd.c optional bhnd dev/bhnd/bhnd_erom.c optional bhnd dev/bhnd/bhnd_erom_if.m optional bhnd dev/bhnd/bhnd_subr.c optional bhnd dev/bhnd/bhnd_bus_if.m optional bhnd dev/bhnd/bhndb/bhnd_bhndb.c optional bhndb bhnd dev/bhnd/bhndb/bhndb.c optional bhndb bhnd dev/bhnd/bhndb/bhndb_bus_if.m optional bhndb bhnd dev/bhnd/bhndb/bhndb_hwdata.c optional bhndb bhnd dev/bhnd/bhndb/bhndb_if.m optional bhndb bhnd dev/bhnd/bhndb/bhndb_pci.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_pci_hwdata.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_pci_sprom.c optional bhndb_pci bhndb bhnd pci dev/bhnd/bhndb/bhndb_subr.c optional bhndb bhnd dev/bhnd/bcma/bcma.c optional bcma bhnd dev/bhnd/bcma/bcma_bhndb.c optional bcma bhnd bhndb dev/bhnd/bcma/bcma_erom.c optional bcma bhnd dev/bhnd/bcma/bcma_subr.c optional bcma bhnd dev/bhnd/cores/chipc/bhnd_chipc_if.m optional bhnd dev/bhnd/cores/chipc/bhnd_sprom_chipc.c optional bhnd dev/bhnd/cores/chipc/bhnd_pmu_chipc.c optional bhnd dev/bhnd/cores/chipc/chipc.c optional bhnd dev/bhnd/cores/chipc/chipc_cfi.c optional bhnd cfi dev/bhnd/cores/chipc/chipc_gpio.c optional bhnd gpio dev/bhnd/cores/chipc/chipc_slicer.c optional bhnd cfi | bhnd spibus dev/bhnd/cores/chipc/chipc_spi.c optional bhnd spibus dev/bhnd/cores/chipc/chipc_subr.c optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl.c optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_if.m optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_hostb_if.m optional bhnd dev/bhnd/cores/chipc/pwrctl/bhnd_pwrctl_subr.c optional bhnd dev/bhnd/cores/pci/bhnd_pci.c optional bhnd pci dev/bhnd/cores/pci/bhnd_pci_hostb.c optional bhndb bhnd pci dev/bhnd/cores/pci/bhnd_pcib.c optional bhnd_pcib bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2.c optional bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2_hostb.c optional bhndb bhnd pci dev/bhnd/cores/pcie2/bhnd_pcie2b.c optional bhnd_pcie2b bhnd pci dev/bhnd/cores/pmu/bhnd_pmu.c optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_core.c optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_if.m optional bhnd dev/bhnd/cores/pmu/bhnd_pmu_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_bcm.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_bcmraw.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_btxt.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_sprom.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_sprom_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_data_tlv.c optional bhnd dev/bhnd/nvram/bhnd_nvram_if.m optional bhnd dev/bhnd/nvram/bhnd_nvram_io.c optional bhnd dev/bhnd/nvram/bhnd_nvram_iobuf.c optional bhnd dev/bhnd/nvram/bhnd_nvram_ioptr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_iores.c optional bhnd dev/bhnd/nvram/bhnd_nvram_plist.c optional bhnd dev/bhnd/nvram/bhnd_nvram_store.c optional bhnd dev/bhnd/nvram/bhnd_nvram_store_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_subr.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_fmts.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_prf.c optional bhnd dev/bhnd/nvram/bhnd_nvram_value_subr.c optional bhnd dev/bhnd/nvram/bhnd_sprom.c optional bhnd dev/bhnd/siba/siba.c optional siba bhnd dev/bhnd/siba/siba_bhndb.c optional siba bhnd bhndb dev/bhnd/siba/siba_erom.c optional siba bhnd dev/bhnd/siba/siba_subr.c optional siba bhnd # dev/bktr/bktr_audio.c optional bktr pci dev/bktr/bktr_card.c optional bktr pci dev/bktr/bktr_core.c optional bktr pci dev/bktr/bktr_i2c.c optional bktr pci smbus dev/bktr/bktr_os.c optional bktr pci dev/bktr/bktr_tuner.c optional bktr pci dev/bktr/msp34xx.c optional bktr pci dev/bnxt/bnxt_hwrm.c optional bnxt iflib pci dev/bnxt/bnxt_sysctl.c optional bnxt iflib pci dev/bnxt/bnxt_txrx.c optional bnxt iflib pci dev/bnxt/if_bnxt.c optional bnxt iflib pci dev/bwi/bwimac.c optional bwi dev/bwi/bwiphy.c optional bwi dev/bwi/bwirf.c optional bwi dev/bwi/if_bwi.c optional bwi dev/bwi/if_bwi_pci.c optional bwi pci dev/bwn/if_bwn.c optional bwn bhnd dev/bwn/if_bwn_pci.c optional bwn pci bhnd bhndb bhndb_pci dev/bwn/if_bwn_phy_common.c optional bwn bhnd dev/bwn/if_bwn_phy_g.c optional bwn bhnd dev/bwn/if_bwn_phy_lp.c optional bwn bhnd dev/bwn/if_bwn_phy_n.c optional bwn bhnd dev/bwn/if_bwn_util.c optional bwn bhnd dev/cardbus/cardbus.c optional cardbus dev/cardbus/cardbus_cis.c optional cardbus dev/cardbus/cardbus_device.c optional cardbus dev/cas/if_cas.c optional cas dev/cfi/cfi_bus_fdt.c optional cfi fdt dev/cfi/cfi_bus_nexus.c optional cfi dev/cfi/cfi_core.c optional cfi dev/cfi/cfi_dev.c optional cfi dev/cfi/cfi_disk.c optional cfid dev/chromebook_platform/chromebook_platform.c optional chromebook_platform dev/ciss/ciss.c optional ciss dev/cmx/cmx.c optional cmx dev/cmx/cmx_pccard.c optional cmx pccard dev/cpufreq/ichss.c optional cpufreq pci dev/cs/if_cs.c optional cs dev/cs/if_cs_isa.c optional cs isa dev/cs/if_cs_pccard.c optional cs pccard dev/cxgb/cxgb_main.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_sge.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_mc5.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_vsc7323.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_vsc8211.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_ael1002.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_aq100x.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_mv88e1xxx.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_xgmac.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_t3_hw.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/common/cxgb_tn1010.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/sys/uipc_mvec.c optional cxgb pci \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgb/cxgb_t3fw.c optional cxgb cxgb_t3fw \ compile-with "${NORMAL_C} -I$S/dev/cxgb" dev/cxgbe/t4_filter.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_if.m optional cxgbe pci dev/cxgbe/t4_iov.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_mp_ring.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_main.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_netmap.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_sched.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_sge.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_smt.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_l2t.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_tracer.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/t4_vf.c optional cxgbev pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/common/t4_hw.c optional cxgbe pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/common/t4vf_hw.c optional cxgbev pci \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_common.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_flash_utils.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_lib.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/cudbg_wtp.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/fastlz.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cxgbe/cudbg/fastlz_api.c optional cxgbe \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" t4fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t4fw_cfg.fw:t4fw_cfg t4fw_cfg_uwire.fw:t4fw_cfg_uwire t4fw.fw:t4fw -mt4fw_cfg -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "t4fw_cfg.c" t4fw_cfg.fwo optional cxgbe \ dependency "t4fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw_cfg.fwo" t4fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t4fw_cfg.fw" t4fw_cfg_uwire.fwo optional cxgbe \ dependency "t4fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw_cfg_uwire.fwo" t4fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t4fw_cfg_uwire.fw" t4fw.fwo optional cxgbe \ dependency "t4fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t4fw.fwo" t4fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t4fw-1.19.1.0.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "t4fw.fw" t5fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t5fw_cfg.fw:t5fw_cfg t5fw_cfg_uwire.fw:t5fw_cfg_uwire t5fw.fw:t5fw -mt5fw_cfg -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "t5fw_cfg.c" t5fw_cfg.fwo optional cxgbe \ dependency "t5fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw_cfg.fwo" t5fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t5fw_cfg.fw" t5fw_cfg_uwire.fwo optional cxgbe \ dependency "t5fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw_cfg_uwire.fwo" t5fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t5fw_cfg_uwire.fw" t5fw.fwo optional cxgbe \ dependency "t5fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t5fw.fwo" t5fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t5fw-1.19.1.0.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "t5fw.fw" t6fw_cfg.c optional cxgbe \ compile-with "${AWK} -f $S/tools/fw_stub.awk t6fw_cfg.fw:t6fw_cfg t6fw_cfg_uwire.fw:t6fw_cfg_uwire t6fw.fw:t6fw -mt6fw_cfg -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "t6fw_cfg.c" t6fw_cfg.fwo optional cxgbe \ dependency "t6fw_cfg.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw_cfg.fwo" t6fw_cfg.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw_cfg.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t6fw_cfg.fw" t6fw_cfg_uwire.fwo optional cxgbe \ dependency "t6fw_cfg_uwire.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw_cfg_uwire.fwo" t6fw_cfg_uwire.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw_cfg_uwire.txt" \ compile-with "${CP} ${.ALLSRC} ${.TARGET}" \ no-obj no-implicit-rule \ clean "t6fw_cfg_uwire.fw" t6fw.fwo optional cxgbe \ dependency "t6fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "t6fw.fwo" t6fw.fw optional cxgbe \ dependency "$S/dev/cxgbe/firmware/t6fw-1.19.1.0.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "t6fw.fw" dev/cxgbe/crypto/t4_crypto.c optional ccr \ compile-with "${NORMAL_C} -I$S/dev/cxgbe" dev/cy/cy.c optional cy dev/cy/cy_isa.c optional cy isa dev/cy/cy_pci.c optional cy pci dev/cyapa/cyapa.c optional cyapa iicbus dev/dc/if_dc.c optional dc pci dev/dc/dcphy.c optional dc pci dev/dc/pnphy.c optional dc pci dev/dcons/dcons.c optional dcons dev/dcons/dcons_crom.c optional dcons_crom dev/dcons/dcons_os.c optional dcons dev/de/if_de.c optional de pci dev/dme/if_dme.c optional dme -dev/dpt/dpt_pci.c optional dpt pci -dev/dpt/dpt_scsi.c optional dpt dev/drm/ati_pcigart.c optional drm dev/drm/drm_agpsupport.c optional drm dev/drm/drm_auth.c optional drm dev/drm/drm_bufs.c optional drm dev/drm/drm_context.c optional drm dev/drm/drm_dma.c optional drm dev/drm/drm_drawable.c optional drm dev/drm/drm_drv.c optional drm dev/drm/drm_fops.c optional drm dev/drm/drm_hashtab.c optional drm dev/drm/drm_ioctl.c optional drm dev/drm/drm_irq.c optional drm dev/drm/drm_lock.c optional drm dev/drm/drm_memory.c optional drm dev/drm/drm_mm.c optional drm dev/drm/drm_pci.c optional drm dev/drm/drm_scatter.c optional drm dev/drm/drm_sman.c optional drm dev/drm/drm_sysctl.c optional drm dev/drm/drm_vm.c optional drm dev/drm/mach64_dma.c optional mach64drm dev/drm/mach64_drv.c optional mach64drm dev/drm/mach64_irq.c optional mach64drm dev/drm/mach64_state.c optional mach64drm dev/drm/mga_dma.c optional mgadrm dev/drm/mga_drv.c optional mgadrm dev/drm/mga_irq.c optional mgadrm dev/drm/mga_state.c optional mgadrm dev/drm/mga_warp.c optional mgadrm dev/drm/r128_cce.c optional r128drm \ compile-with "${NORMAL_C} ${NO_WCONSTANT_CONVERSION}" dev/drm/r128_drv.c optional r128drm dev/drm/r128_irq.c optional r128drm dev/drm/r128_state.c optional r128drm dev/drm/savage_bci.c optional savagedrm dev/drm/savage_drv.c optional savagedrm dev/drm/savage_state.c optional savagedrm dev/drm/sis_drv.c optional sisdrm dev/drm/sis_ds.c optional sisdrm dev/drm/sis_mm.c optional sisdrm dev/drm/tdfx_drv.c optional tdfxdrm dev/drm/via_dma.c optional viadrm dev/drm/via_dmablit.c optional viadrm dev/drm/via_drv.c optional viadrm dev/drm/via_irq.c optional viadrm dev/drm/via_map.c optional viadrm dev/drm/via_mm.c optional viadrm dev/drm/via_verifier.c optional viadrm dev/drm/via_video.c optional viadrm dev/drm2/drm_agpsupport.c optional drm2 dev/drm2/drm_auth.c optional drm2 dev/drm2/drm_bufs.c optional drm2 dev/drm2/drm_buffer.c optional drm2 dev/drm2/drm_context.c optional drm2 dev/drm2/drm_crtc.c optional drm2 dev/drm2/drm_crtc_helper.c optional drm2 dev/drm2/drm_dma.c optional drm2 dev/drm2/drm_dp_helper.c optional drm2 dev/drm2/drm_dp_iic_helper.c optional drm2 dev/drm2/drm_drv.c optional drm2 dev/drm2/drm_edid.c optional drm2 dev/drm2/drm_fb_helper.c optional drm2 dev/drm2/drm_fops.c optional drm2 dev/drm2/drm_gem.c optional drm2 dev/drm2/drm_gem_names.c optional drm2 dev/drm2/drm_global.c optional drm2 dev/drm2/drm_hashtab.c optional drm2 dev/drm2/drm_ioctl.c optional drm2 dev/drm2/drm_irq.c optional drm2 dev/drm2/drm_linux_list_sort.c optional drm2 dev/drm2/drm_lock.c optional drm2 dev/drm2/drm_memory.c optional drm2 dev/drm2/drm_mm.c optional drm2 dev/drm2/drm_modes.c optional drm2 dev/drm2/drm_pci.c optional drm2 dev/drm2/drm_platform.c optional drm2 dev/drm2/drm_scatter.c optional drm2 dev/drm2/drm_stub.c optional drm2 dev/drm2/drm_sysctl.c optional drm2 dev/drm2/drm_vm.c optional drm2 dev/drm2/drm_os_freebsd.c optional drm2 dev/drm2/ttm/ttm_agp_backend.c optional drm2 dev/drm2/ttm/ttm_lock.c optional drm2 dev/drm2/ttm/ttm_object.c optional drm2 dev/drm2/ttm/ttm_tt.c optional drm2 dev/drm2/ttm/ttm_bo_util.c optional drm2 dev/drm2/ttm/ttm_bo.c optional drm2 dev/drm2/ttm/ttm_bo_manager.c optional drm2 dev/drm2/ttm/ttm_execbuf_util.c optional drm2 dev/drm2/ttm/ttm_memory.c optional drm2 dev/drm2/ttm/ttm_page_alloc.c optional drm2 dev/drm2/ttm/ttm_bo_vm.c optional drm2 dev/drm2/ati_pcigart.c optional drm2 agp pci dev/ed/if_ed.c optional ed dev/ed/if_ed_novell.c optional ed dev/ed/if_ed_rtl80x9.c optional ed dev/ed/if_ed_pccard.c optional ed pccard dev/ed/if_ed_pci.c optional ed pci dev/efidev/efidev.c optional efirt dev/efidev/efirt.c optional efirt dev/efidev/efirtc.c optional efirt dev/e1000/if_em.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/em_txrx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/igb_txrx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_80003es2lan.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82540.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82541.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82542.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82543.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82571.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_82575.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_ich8lan.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_i210.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_api.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_mac.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_manage.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_nvm.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_phy.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_vf.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_mbx.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/e1000/e1000_osdep.c optional em \ compile-with "${NORMAL_C} -I$S/dev/e1000" dev/et/if_et.c optional et dev/ena/ena.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" dev/ena/ena_sysctl.c optional ena \ compile-with "${NORMAL_C} -I$S/contrib" contrib/ena-com/ena_com.c optional ena contrib/ena-com/ena_eth_com.c optional ena dev/ep/if_ep.c optional ep dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_pccard.c optional ep pccard dev/esp/esp_pci.c optional esp pci dev/esp/ncr53c9x.c optional esp dev/etherswitch/arswitch/arswitch.c optional arswitch dev/etherswitch/arswitch/arswitch_reg.c optional arswitch dev/etherswitch/arswitch/arswitch_phy.c optional arswitch dev/etherswitch/arswitch/arswitch_8216.c optional arswitch dev/etherswitch/arswitch/arswitch_8226.c optional arswitch dev/etherswitch/arswitch/arswitch_8316.c optional arswitch dev/etherswitch/arswitch/arswitch_8327.c optional arswitch dev/etherswitch/arswitch/arswitch_7240.c optional arswitch dev/etherswitch/arswitch/arswitch_9340.c optional arswitch dev/etherswitch/arswitch/arswitch_vlans.c optional arswitch dev/etherswitch/etherswitch.c optional etherswitch dev/etherswitch/etherswitch_if.m optional etherswitch dev/etherswitch/ip17x/ip17x.c optional ip17x dev/etherswitch/ip17x/ip175c.c optional ip17x dev/etherswitch/ip17x/ip175d.c optional ip17x dev/etherswitch/ip17x/ip17x_phy.c optional ip17x dev/etherswitch/ip17x/ip17x_vlans.c optional ip17x dev/etherswitch/miiproxy.c optional miiproxy dev/etherswitch/rtl8366/rtl8366rb.c optional rtl8366rb dev/etherswitch/e6000sw/e6000sw.c optional e6000sw dev/etherswitch/e6000sw/e6060sw.c optional e6060sw dev/etherswitch/infineon/adm6996fc.c optional adm6996fc dev/etherswitch/micrel/ksz8995ma.c optional ksz8995ma dev/etherswitch/ukswitch/ukswitch.c optional ukswitch dev/evdev/cdev.c optional evdev dev/evdev/evdev.c optional evdev dev/evdev/evdev_mt.c optional evdev dev/evdev/evdev_utils.c optional evdev dev/evdev/uinput.c optional evdev uinput dev/ex/if_ex.c optional ex dev/ex/if_ex_isa.c optional ex isa dev/ex/if_ex_pccard.c optional ex pccard dev/exca/exca.c optional cbb dev/extres/clk/clk.c optional ext_resources clk fdt dev/extres/clk/clkdev_if.m optional ext_resources clk fdt dev/extres/clk/clknode_if.m optional ext_resources clk fdt dev/extres/clk/clk_bus.c optional ext_resources clk fdt dev/extres/clk/clk_div.c optional ext_resources clk fdt dev/extres/clk/clk_fixed.c optional ext_resources clk fdt dev/extres/clk/clk_gate.c optional ext_resources clk fdt dev/extres/clk/clk_mux.c optional ext_resources clk fdt dev/extres/phy/phy.c optional ext_resources phy fdt dev/extres/phy/phydev_if.m optional ext_resources phy fdt dev/extres/phy/phynode_if.m optional ext_resources phy fdt dev/extres/hwreset/hwreset.c optional ext_resources hwreset fdt dev/extres/hwreset/hwreset_if.m optional ext_resources hwreset fdt dev/extres/nvmem/nvmem.c optional ext_resources nvmem fdt dev/extres/nvmem/nvmem_if.m optional ext_resources nvmem fdt dev/extres/regulator/regdev_if.m optional ext_resources regulator fdt dev/extres/regulator/regnode_if.m optional ext_resources regulator fdt dev/extres/regulator/regulator.c optional ext_resources regulator fdt dev/extres/regulator/regulator_bus.c optional ext_resources regulator fdt dev/extres/regulator/regulator_fixed.c optional ext_resources regulator fdt dev/extres/syscon/syscon.c optional ext_resources syscon dev/extres/syscon/syscon_generic.c optional ext_resources syscon fdt dev/extres/syscon/syscon_if.m optional ext_resources syscon dev/fb/fbd.c optional fbd | vt dev/fb/fb_if.m standard dev/fb/splash.c optional sc splash dev/fdt/fdt_clock.c optional fdt fdt_clock dev/fdt/fdt_clock_if.m optional fdt fdt_clock dev/fdt/fdt_common.c optional fdt dev/fdt/fdt_pinctrl.c optional fdt fdt_pinctrl dev/fdt/fdt_pinctrl_if.m optional fdt fdt_pinctrl dev/fdt/fdt_slicer.c optional fdt cfi | fdt nand | fdt mx25l | fdt n25q dev/fdt/fdt_static_dtb.S optional fdt fdt_dtb_static \ dependency "fdt_dtb_file" dev/fdt/simplebus.c optional fdt dev/fe/if_fe.c optional fe dev/fe/if_fe_pccard.c optional fe pccard dev/filemon/filemon.c optional filemon dev/firewire/firewire.c optional firewire dev/firewire/fwcrom.c optional firewire dev/firewire/fwdev.c optional firewire dev/firewire/fwdma.c optional firewire dev/firewire/fwmem.c optional firewire dev/firewire/fwohci.c optional firewire dev/firewire/fwohci_pci.c optional firewire pci dev/firewire/if_fwe.c optional fwe dev/firewire/if_fwip.c optional fwip dev/firewire/sbp.c optional sbp dev/firewire/sbp_targ.c optional sbp_targ dev/flash/at45d.c optional at45d dev/flash/cqspi.c optional cqspi fdt xdma dev/flash/mx25l.c optional mx25l dev/flash/n25q.c optional n25q fdt dev/flash/qspi_if.m optional cqspi fdt | n25q fdt dev/fxp/if_fxp.c optional fxp dev/fxp/inphy.c optional fxp dev/gem/if_gem.c optional gem dev/gem/if_gem_pci.c optional gem pci dev/gem/if_gem_sbus.c optional gem sbus dev/gpio/gpiobacklight.c optional gpiobacklight fdt dev/gpio/gpiokeys.c optional gpiokeys fdt dev/gpio/gpiokeys_codes.c optional gpiokeys fdt dev/gpio/gpiobus.c optional gpio \ dependency "gpiobus_if.h" dev/gpio/gpioc.c optional gpio \ dependency "gpio_if.h" dev/gpio/gpioiic.c optional gpioiic dev/gpio/gpioled.c optional gpioled !fdt dev/gpio/gpioled_fdt.c optional gpioled fdt dev/gpio/gpiopower.c optional gpiopower fdt dev/gpio/gpioregulator.c optional gpioregulator fdt ext_resources dev/gpio/gpiospi.c optional gpiospi dev/gpio/gpioths.c optional gpioths dev/gpio/gpio_if.m optional gpio dev/gpio/gpiobus_if.m optional gpio dev/gpio/gpiopps.c optional gpiopps dev/gpio/ofw_gpiobus.c optional fdt gpio dev/hifn/hifn7751.c optional hifn dev/hme/if_hme.c optional hme dev/hme/if_hme_pci.c optional hme pci dev/hme/if_hme_sbus.c optional hme sbus dev/hptiop/hptiop.c optional hptiop scbus dev/hwpmc/hwpmc_logging.c optional hwpmc dev/hwpmc/hwpmc_mod.c optional hwpmc dev/hwpmc/hwpmc_soft.c optional hwpmc dev/ichiic/ig4_acpi.c optional ig4 acpi iicbus dev/ichiic/ig4_iic.c optional ig4 iicbus dev/ichiic/ig4_pci.c optional ig4 pci iicbus dev/ichsmb/ichsmb.c optional ichsmb dev/ichsmb/ichsmb_pci.c optional ichsmb pci dev/ida/ida.c optional ida dev/ida/ida_disk.c optional ida dev/ida/ida_pci.c optional ida pci dev/iicbus/ad7418.c optional ad7418 dev/iicbus/ds1307.c optional ds1307 dev/iicbus/ds13rtc.c optional ds13rtc | ds133x | ds1374 dev/iicbus/ds1672.c optional ds1672 dev/iicbus/ds3231.c optional ds3231 dev/iicbus/rtc8583.c optional rtc8583 dev/iicbus/icee.c optional icee dev/iicbus/if_ic.c optional ic dev/iicbus/iic.c optional iic dev/iicbus/iic_recover_bus.c optional iicbus dev/iicbus/iicbb.c optional iicbb dev/iicbus/iicbb_if.m optional iicbb dev/iicbus/iicbus.c optional iicbus dev/iicbus/iicbus_if.m optional iicbus dev/iicbus/iiconf.c optional iicbus dev/iicbus/iicsmb.c optional iicsmb \ dependency "iicbus_if.h" dev/iicbus/iicoc.c optional iicoc dev/iicbus/isl12xx.c optional isl12xx dev/iicbus/lm75.c optional lm75 dev/iicbus/nxprtc.c optional nxprtc | pcf8563 dev/iicbus/ofw_iicbus.c optional fdt iicbus dev/iicbus/s35390a.c optional s35390a dev/iir/iir.c optional iir dev/iir/iir_ctrl.c optional iir dev/iir/iir_pci.c optional iir pci dev/intpm/intpm.c optional intpm pci # XXX Work around clang warning, until maintainer approves fix. dev/ips/ips.c optional ips \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/ips/ips_commands.c optional ips dev/ips/ips_disk.c optional ips dev/ips/ips_ioctl.c optional ips dev/ips/ips_pci.c optional ips pci dev/ipw/if_ipw.c optional ipw ipwbssfw.c optional ipwbssfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_bss.fw:ipw_bss:130 -lintel_ipw -mipw_bss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwbssfw.c" ipw_bss.fwo optional ipwbssfw | ipwfw \ dependency "ipw_bss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_bss.fwo" ipw_bss.fw optional ipwbssfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_bss.fw" ipwibssfw.c optional ipwibssfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_ibss.fw:ipw_ibss:130 -lintel_ipw -mipw_ibss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwibssfw.c" ipw_ibss.fwo optional ipwibssfw | ipwfw \ dependency "ipw_ibss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_ibss.fwo" ipw_ibss.fw optional ipwibssfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3-i.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_ibss.fw" ipwmonitorfw.c optional ipwmonitorfw | ipwfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk ipw_monitor.fw:ipw_monitor:130 -lintel_ipw -mipw_monitor -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "ipwmonitorfw.c" ipw_monitor.fwo optional ipwmonitorfw | ipwfw \ dependency "ipw_monitor.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "ipw_monitor.fwo" ipw_monitor.fw optional ipwmonitorfw | ipwfw \ dependency "$S/contrib/dev/ipw/ipw2100-1.3-p.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "ipw_monitor.fw" dev/iscsi/icl.c optional iscsi dev/iscsi/icl_conn_if.m optional cfiscsi | iscsi dev/iscsi/icl_soft.c optional iscsi dev/iscsi/icl_soft_proxy.c optional iscsi dev/iscsi/iscsi.c optional iscsi scbus dev/iscsi_initiator/iscsi.c optional iscsi_initiator scbus dev/iscsi_initiator/iscsi_subr.c optional iscsi_initiator scbus dev/iscsi_initiator/isc_cam.c optional iscsi_initiator scbus dev/iscsi_initiator/isc_soc.c optional iscsi_initiator scbus dev/iscsi_initiator/isc_sm.c optional iscsi_initiator scbus dev/iscsi_initiator/isc_subr.c optional iscsi_initiator scbus dev/ismt/ismt.c optional ismt dev/isl/isl.c optional isl iicbus dev/isp/isp.c optional isp dev/isp/isp_freebsd.c optional isp dev/isp/isp_library.c optional isp dev/isp/isp_pci.c optional isp pci dev/isp/isp_sbus.c optional isp sbus dev/isp/isp_target.c optional isp dev/ispfw/ispfw.c optional ispfw dev/iwi/if_iwi.c optional iwi iwibssfw.c optional iwibssfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_bss.fw:iwi_bss:300 -lintel_iwi -miwi_bss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwibssfw.c" iwi_bss.fwo optional iwibssfw | iwifw \ dependency "iwi_bss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_bss.fwo" iwi_bss.fw optional iwibssfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-bss.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_bss.fw" iwiibssfw.c optional iwiibssfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_ibss.fw:iwi_ibss:300 -lintel_iwi -miwi_ibss -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwiibssfw.c" iwi_ibss.fwo optional iwiibssfw | iwifw \ dependency "iwi_ibss.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_ibss.fwo" iwi_ibss.fw optional iwiibssfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-ibss.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_ibss.fw" iwimonitorfw.c optional iwimonitorfw | iwifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwi_monitor.fw:iwi_monitor:300 -lintel_iwi -miwi_monitor -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwimonitorfw.c" iwi_monitor.fwo optional iwimonitorfw | iwifw \ dependency "iwi_monitor.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwi_monitor.fwo" iwi_monitor.fw optional iwimonitorfw | iwifw \ dependency "$S/contrib/dev/iwi/ipw2200-sniffer.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwi_monitor.fw" dev/iwm/if_iwm.c optional iwm dev/iwm/if_iwm_7000.c optional iwm dev/iwm/if_iwm_8000.c optional iwm dev/iwm/if_iwm_binding.c optional iwm dev/iwm/if_iwm_fw.c optional iwm dev/iwm/if_iwm_led.c optional iwm dev/iwm/if_iwm_mac_ctxt.c optional iwm dev/iwm/if_iwm_notif_wait.c optional iwm dev/iwm/if_iwm_pcie_trans.c optional iwm dev/iwm/if_iwm_phy_ctxt.c optional iwm dev/iwm/if_iwm_phy_db.c optional iwm dev/iwm/if_iwm_power.c optional iwm dev/iwm/if_iwm_scan.c optional iwm dev/iwm/if_iwm_sf.c optional iwm dev/iwm/if_iwm_sta.c optional iwm dev/iwm/if_iwm_time_event.c optional iwm dev/iwm/if_iwm_util.c optional iwm iwm3160fw.c optional iwm3160fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm3160.fw:iwm3160fw -miwm3160fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm3160fw.c" iwm3160fw.fwo optional iwm3160fw | iwmfw \ dependency "iwm3160.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm3160fw.fwo" iwm3160.fw optional iwm3160fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-3160-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm3160.fw" iwm3168fw.c optional iwm3168fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm3168.fw:iwm3168fw -miwm3168fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm3168fw.c" iwm3168fw.fwo optional iwm3168fw | iwmfw \ dependency "iwm3168.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm3168fw.fwo" iwm3168.fw optional iwm3168fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-3168-22.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm3168.fw" iwm7260fw.c optional iwm7260fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7260.fw:iwm7260fw -miwm7260fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm7260fw.c" iwm7260fw.fwo optional iwm7260fw | iwmfw \ dependency "iwm7260.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7260fw.fwo" iwm7260.fw optional iwm7260fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7260-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7260.fw" iwm7265fw.c optional iwm7265fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7265.fw:iwm7265fw -miwm7265fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm7265fw.c" iwm7265fw.fwo optional iwm7265fw | iwmfw \ dependency "iwm7265.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7265fw.fwo" iwm7265.fw optional iwm7265fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7265-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7265.fw" iwm7265Dfw.c optional iwm7265Dfw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm7265D.fw:iwm7265Dfw -miwm7265Dfw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm7265Dfw.c" iwm7265Dfw.fwo optional iwm7265Dfw | iwmfw \ dependency "iwm7265D.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm7265Dfw.fwo" iwm7265D.fw optional iwm7265Dfw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-7265D-17.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm7265D.fw" iwm8000Cfw.c optional iwm8000Cfw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm8000C.fw:iwm8000Cfw -miwm8000Cfw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm8000Cfw.c" iwm8000Cfw.fwo optional iwm8000Cfw | iwmfw \ dependency "iwm8000C.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm8000Cfw.fwo" iwm8000C.fw optional iwm8000Cfw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-8000C-16.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm8000C.fw" iwm8265.fw optional iwm8265fw | iwmfw \ dependency "$S/contrib/dev/iwm/iwm-8265-22.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwm8265.fw" iwm8265fw.c optional iwm8265fw | iwmfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwm8265.fw:iwm8265fw -miwm8265fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwm8265fw.c" iwm8265fw.fwo optional iwm8265fw | iwmfw \ dependency "iwm8265.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwm8265fw.fwo" dev/iwn/if_iwn.c optional iwn iwn1000fw.c optional iwn1000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn1000.fw:iwn1000fw -miwn1000fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn1000fw.c" iwn1000fw.fwo optional iwn1000fw | iwnfw \ dependency "iwn1000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn1000fw.fwo" iwn1000.fw optional iwn1000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-1000-39.31.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn1000.fw" iwn100fw.c optional iwn100fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn100.fw:iwn100fw -miwn100fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn100fw.c" iwn100fw.fwo optional iwn100fw | iwnfw \ dependency "iwn100.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn100fw.fwo" iwn100.fw optional iwn100fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-100-39.31.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn100.fw" iwn105fw.c optional iwn105fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn105.fw:iwn105fw -miwn105fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn105fw.c" iwn105fw.fwo optional iwn105fw | iwnfw \ dependency "iwn105.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn105fw.fwo" iwn105.fw optional iwn105fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-105-6-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn105.fw" iwn135fw.c optional iwn135fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn135.fw:iwn135fw -miwn135fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn135fw.c" iwn135fw.fwo optional iwn135fw | iwnfw \ dependency "iwn135.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn135fw.fwo" iwn135.fw optional iwn135fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-135-6-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn135.fw" iwn2000fw.c optional iwn2000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn2000.fw:iwn2000fw -miwn2000fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn2000fw.c" iwn2000fw.fwo optional iwn2000fw | iwnfw \ dependency "iwn2000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn2000fw.fwo" iwn2000.fw optional iwn2000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-2000-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn2000.fw" iwn2030fw.c optional iwn2030fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn2030.fw:iwn2030fw -miwn2030fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn2030fw.c" iwn2030fw.fwo optional iwn2030fw | iwnfw \ dependency "iwn2030.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn2030fw.fwo" iwn2030.fw optional iwn2030fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwnwifi-2030-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn2030.fw" iwn4965fw.c optional iwn4965fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn4965.fw:iwn4965fw -miwn4965fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn4965fw.c" iwn4965fw.fwo optional iwn4965fw | iwnfw \ dependency "iwn4965.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn4965fw.fwo" iwn4965.fw optional iwn4965fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-4965-228.61.2.24.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn4965.fw" iwn5000fw.c optional iwn5000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn5000.fw:iwn5000fw -miwn5000fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn5000fw.c" iwn5000fw.fwo optional iwn5000fw | iwnfw \ dependency "iwn5000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn5000fw.fwo" iwn5000.fw optional iwn5000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-5000-8.83.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn5000.fw" iwn5150fw.c optional iwn5150fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn5150.fw:iwn5150fw -miwn5150fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn5150fw.c" iwn5150fw.fwo optional iwn5150fw | iwnfw \ dependency "iwn5150.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn5150fw.fwo" iwn5150.fw optional iwn5150fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-5150-8.24.2.2.fw.uu"\ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn5150.fw" iwn6000fw.c optional iwn6000fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000.fw:iwn6000fw -miwn6000fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn6000fw.c" iwn6000fw.fwo optional iwn6000fw | iwnfw \ dependency "iwn6000.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000fw.fwo" iwn6000.fw optional iwn6000fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000-9.221.4.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000.fw" iwn6000g2afw.c optional iwn6000g2afw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000g2a.fw:iwn6000g2afw -miwn6000g2afw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn6000g2afw.c" iwn6000g2afw.fwo optional iwn6000g2afw | iwnfw \ dependency "iwn6000g2a.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000g2afw.fwo" iwn6000g2a.fw optional iwn6000g2afw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000g2a-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000g2a.fw" iwn6000g2bfw.c optional iwn6000g2bfw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6000g2b.fw:iwn6000g2bfw -miwn6000g2bfw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn6000g2bfw.c" iwn6000g2bfw.fwo optional iwn6000g2bfw | iwnfw \ dependency "iwn6000g2b.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6000g2bfw.fwo" iwn6000g2b.fw optional iwn6000g2bfw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6000g2b-18.168.6.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6000g2b.fw" iwn6050fw.c optional iwn6050fw | iwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk iwn6050.fw:iwn6050fw -miwn6050fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "iwn6050fw.c" iwn6050fw.fwo optional iwn6050fw | iwnfw \ dependency "iwn6050.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "iwn6050fw.fwo" iwn6050.fw optional iwn6050fw | iwnfw \ dependency "$S/contrib/dev/iwn/iwlwifi-6050-41.28.5.1.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6050.fw" dev/ixgbe/if_ix.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe -DSMP" dev/ixgbe/if_ixv.c optional ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe -DSMP" dev/ixgbe/if_bypass.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/if_fdir.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/if_sriov.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ix_txrx.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_osdep.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_phy.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_api.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_common.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_mbx.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_vf.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_82598.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_82599.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_x540.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_x550.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb_82598.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/ixgbe/ixgbe_dcb_82599.c optional ix inet | ixv inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe" dev/jedec_dimm/jedec_dimm.c optional jedec_dimm smbus dev/jme/if_jme.c optional jme pci dev/kbd/kbd.c optional atkbd | pckbd | sc | ukbd | vt dev/kbdmux/kbdmux.c optional kbdmux dev/ksyms/ksyms.c optional ksyms dev/le/am7990.c optional le dev/le/am79900.c optional le dev/le/if_le_pci.c optional le pci dev/le/lance.c optional le dev/led/led.c standard dev/lge/if_lge.c optional lge dev/liquidio/base/cn23xx_pf_device.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_console.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_ctrl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_device.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_droq.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_mem_ops.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_request_manager.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/base/lio_response_manager.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_core.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_ioctl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_main.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_rss.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_rxtx.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" dev/liquidio/lio_sysctl.c optional lio \ compile-with "${NORMAL_C} \ -I$S/dev/liquidio -I$S/dev/liquidio/base -DSMP" lio.c optional lio \ compile-with "${AWK} -f $S/tools/fw_stub.awk lio_23xx_nic.bin.fw:lio_23xx_nic.bin -mlio_23xx_nic.bin -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "lio.c" lio_23xx_nic.bin.fw.fwo optional lio \ dependency "lio_23xx_nic.bin.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "lio_23xx_nic.bin.fw.fwo" lio_23xx_nic.bin.fw optional lio \ dependency "$S/contrib/dev/liquidio/lio_23xx_nic.bin.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "lio_23xx_nic.bin.fw" dev/malo/if_malo.c optional malo dev/malo/if_malohal.c optional malo dev/malo/if_malo_pci.c optional malo pci dev/mc146818/mc146818.c optional mc146818 dev/md/md.c optional md dev/mdio/mdio_if.m optional miiproxy | mdio dev/mdio/mdio.c optional miiproxy | mdio dev/mem/memdev.c optional mem dev/mem/memutil.c optional mem dev/mfi/mfi.c optional mfi dev/mfi/mfi_debug.c optional mfi dev/mfi/mfi_pci.c optional mfi pci dev/mfi/mfi_disk.c optional mfi dev/mfi/mfi_syspd.c optional mfi dev/mfi/mfi_tbolt.c optional mfi dev/mfi/mfi_linux.c optional mfi compat_linux dev/mfi/mfi_cam.c optional mfip scbus dev/mii/acphy.c optional miibus | acphy dev/mii/amphy.c optional miibus | amphy dev/mii/atphy.c optional miibus | atphy dev/mii/axphy.c optional miibus | axphy dev/mii/bmtphy.c optional miibus | bmtphy dev/mii/brgphy.c optional miibus | brgphy dev/mii/ciphy.c optional miibus | ciphy dev/mii/e1000phy.c optional miibus | e1000phy dev/mii/gentbi.c optional miibus | gentbi dev/mii/icsphy.c optional miibus | icsphy dev/mii/ip1000phy.c optional miibus | ip1000phy dev/mii/jmphy.c optional miibus | jmphy dev/mii/lxtphy.c optional miibus | lxtphy dev/mii/micphy.c optional miibus fdt | micphy fdt dev/mii/mii.c optional miibus | mii dev/mii/mii_bitbang.c optional miibus | mii_bitbang dev/mii/mii_physubr.c optional miibus | mii dev/mii/mii_fdt.c optional miibus fdt | mii fdt dev/mii/miibus_if.m optional miibus | mii dev/mii/mlphy.c optional miibus | mlphy dev/mii/nsgphy.c optional miibus | nsgphy dev/mii/nsphy.c optional miibus | nsphy dev/mii/nsphyter.c optional miibus | nsphyter dev/mii/pnaphy.c optional miibus | pnaphy dev/mii/qsphy.c optional miibus | qsphy dev/mii/rdcphy.c optional miibus | rdcphy dev/mii/rgephy.c optional miibus | rgephy dev/mii/rlphy.c optional miibus | rlphy dev/mii/rlswitch.c optional rlswitch dev/mii/smcphy.c optional miibus | smcphy dev/mii/smscphy.c optional miibus | smscphy dev/mii/tdkphy.c optional miibus | tdkphy dev/mii/tlphy.c optional miibus | tlphy dev/mii/truephy.c optional miibus | truephy dev/mii/ukphy.c optional miibus | mii dev/mii/ukphy_subr.c optional miibus | mii dev/mii/vscphy.c optional miibus | vscphy dev/mii/xmphy.c optional miibus | xmphy dev/mk48txx/mk48txx.c optional mk48txx dev/mlx/mlx.c optional mlx dev/mlx/mlx_disk.c optional mlx dev/mlx/mlx_pci.c optional mlx pci dev/mly/mly.c optional mly dev/mmc/mmc_subr.c optional mmc | mmcsd !mmccam dev/mmc/mmc.c optional mmc !mmccam dev/mmc/mmcbr_if.m standard dev/mmc/mmcbus_if.m standard dev/mmc/mmcsd.c optional mmcsd !mmccam dev/mmcnull/mmcnull.c optional mmcnull dev/mn/if_mn.c optional mn pci dev/mpr/mpr.c optional mpr dev/mpr/mpr_config.c optional mpr # XXX Work around clang warning, until maintainer approves fix. dev/mpr/mpr_mapping.c optional mpr \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/mpr/mpr_pci.c optional mpr pci dev/mpr/mpr_sas.c optional mpr \ compile-with "${NORMAL_C} ${NO_WUNNEEDED_INTERNAL_DECL}" dev/mpr/mpr_sas_lsi.c optional mpr dev/mpr/mpr_table.c optional mpr dev/mpr/mpr_user.c optional mpr dev/mps/mps.c optional mps dev/mps/mps_config.c optional mps # XXX Work around clang warning, until maintainer approves fix. dev/mps/mps_mapping.c optional mps \ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}" dev/mps/mps_pci.c optional mps pci dev/mps/mps_sas.c optional mps \ compile-with "${NORMAL_C} ${NO_WUNNEEDED_INTERNAL_DECL}" dev/mps/mps_sas_lsi.c optional mps dev/mps/mps_table.c optional mps dev/mps/mps_user.c optional mps dev/mpt/mpt.c optional mpt dev/mpt/mpt_cam.c optional mpt dev/mpt/mpt_debug.c optional mpt dev/mpt/mpt_pci.c optional mpt pci dev/mpt/mpt_raid.c optional mpt dev/mpt/mpt_user.c optional mpt dev/mrsas/mrsas.c optional mrsas dev/mrsas/mrsas_cam.c optional mrsas dev/mrsas/mrsas_ioctl.c optional mrsas dev/mrsas/mrsas_fp.c optional mrsas dev/msk/if_msk.c optional msk dev/mvs/mvs.c optional mvs dev/mvs/mvs_if.m optional mvs dev/mvs/mvs_pci.c optional mvs pci dev/mwl/if_mwl.c optional mwl dev/mwl/if_mwl_pci.c optional mwl pci dev/mwl/mwlhal.c optional mwl mwlfw.c optional mwlfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk mw88W8363.fw:mw88W8363fw mwlboot.fw:mwlboot -mmwl -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "mwlfw.c" mw88W8363.fwo optional mwlfw \ dependency "mw88W8363.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "mw88W8363.fwo" mw88W8363.fw optional mwlfw \ dependency "$S/contrib/dev/mwl/mw88W8363.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "mw88W8363.fw" mwlboot.fwo optional mwlfw \ dependency "mwlboot.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "mwlboot.fwo" mwlboot.fw optional mwlfw \ dependency "$S/contrib/dev/mwl/mwlboot.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "mwlboot.fw" dev/mxge/if_mxge.c optional mxge pci dev/mxge/mxge_eth_z8e.c optional mxge pci dev/mxge/mxge_ethp_z8e.c optional mxge pci dev/mxge/mxge_rss_eth_z8e.c optional mxge pci dev/mxge/mxge_rss_ethp_z8e.c optional mxge pci dev/my/if_my.c optional my dev/nand/nand.c optional nand dev/nand/nand_bbt.c optional nand dev/nand/nand_cdev.c optional nand dev/nand/nand_generic.c optional nand dev/nand/nand_geom.c optional nand dev/nand/nand_id.c optional nand dev/nand/nandbus.c optional nand dev/nand/nandbus_if.m optional nand dev/nand/nand_if.m optional nand dev/nand/nandsim.c optional nandsim nand dev/nand/nandsim_chip.c optional nandsim nand dev/nand/nandsim_ctrl.c optional nandsim nand dev/nand/nandsim_log.c optional nandsim nand dev/nand/nandsim_swap.c optional nandsim nand dev/nand/nfc_if.m optional nand dev/ncr/ncr.c optional ncr pci dev/ncv/ncr53c500.c optional ncv dev/ncv/ncr53c500_pccard.c optional ncv pccard dev/netmap/if_ptnet.c optional netmap inet dev/netmap/netmap.c optional netmap dev/netmap/netmap_freebsd.c optional netmap dev/netmap/netmap_generic.c optional netmap dev/netmap/netmap_mbq.c optional netmap dev/netmap/netmap_mem2.c optional netmap dev/netmap/netmap_monitor.c optional netmap dev/netmap/netmap_offloadings.c optional netmap dev/netmap/netmap_pipe.c optional netmap dev/netmap/netmap_pt.c optional netmap dev/netmap/netmap_vale.c optional netmap dev/netmap/netmap_legacy.c optional netmap # compile-with "${NORMAL_C} -Wconversion -Wextra" dev/nfsmb/nfsmb.c optional nfsmb pci dev/nge/if_nge.c optional nge dev/nmdm/nmdm.c optional nmdm dev/nsp/nsp.c optional nsp dev/nsp/nsp_pccard.c optional nsp pccard dev/null/null.c standard dev/nvd/nvd.c optional nvd nvme dev/nvme/nvme.c optional nvme dev/nvme/nvme_ctrlr.c optional nvme dev/nvme/nvme_ctrlr_cmd.c optional nvme dev/nvme/nvme_ns.c optional nvme dev/nvme/nvme_ns_cmd.c optional nvme dev/nvme/nvme_qpair.c optional nvme dev/nvme/nvme_sim.c optional nvme scbus dev/nvme/nvme_sysctl.c optional nvme dev/nvme/nvme_test.c optional nvme dev/nvme/nvme_util.c optional nvme dev/oce/oce_hw.c optional oce pci dev/oce/oce_if.c optional oce pci dev/oce/oce_mbox.c optional oce pci dev/oce/oce_queue.c optional oce pci dev/oce/oce_sysctl.c optional oce pci dev/oce/oce_util.c optional oce pci dev/ocs_fc/ocs_pci.c optional ocs_fc pci dev/ocs_fc/ocs_ioctl.c optional ocs_fc pci dev/ocs_fc/ocs_os.c optional ocs_fc pci dev/ocs_fc/ocs_utils.c optional ocs_fc pci dev/ocs_fc/ocs_hw.c optional ocs_fc pci dev/ocs_fc/ocs_hw_queues.c optional ocs_fc pci dev/ocs_fc/sli4.c optional ocs_fc pci dev/ocs_fc/ocs_sm.c optional ocs_fc pci dev/ocs_fc/ocs_device.c optional ocs_fc pci dev/ocs_fc/ocs_xport.c optional ocs_fc pci dev/ocs_fc/ocs_domain.c optional ocs_fc pci dev/ocs_fc/ocs_sport.c optional ocs_fc pci dev/ocs_fc/ocs_els.c optional ocs_fc pci dev/ocs_fc/ocs_fabric.c optional ocs_fc pci dev/ocs_fc/ocs_io.c optional ocs_fc pci dev/ocs_fc/ocs_node.c optional ocs_fc pci dev/ocs_fc/ocs_scsi.c optional ocs_fc pci dev/ocs_fc/ocs_unsol.c optional ocs_fc pci dev/ocs_fc/ocs_ddump.c optional ocs_fc pci dev/ocs_fc/ocs_mgmt.c optional ocs_fc pci dev/ocs_fc/ocs_cam.c optional ocs_fc pci dev/ofw/ofw_bus_if.m optional fdt dev/ofw/ofw_bus_subr.c optional fdt dev/ofw/ofw_cpu.c optional fdt dev/ofw/ofw_fdt.c optional fdt dev/ofw/ofw_if.m optional fdt dev/ofw/ofw_subr.c optional fdt dev/ofw/ofwbus.c optional fdt dev/ofw/openfirm.c optional fdt dev/ofw/openfirmio.c optional fdt dev/ow/ow.c optional ow \ dependency "owll_if.h" \ dependency "own_if.h" dev/ow/owll_if.m optional ow dev/ow/own_if.m optional ow dev/ow/ow_temp.c optional ow_temp dev/ow/owc_gpiobus.c optional owc gpio dev/pbio/pbio.c optional pbio isa dev/pccard/card_if.m standard dev/pccard/pccard.c optional pccard dev/pccard/pccard_cis.c optional pccard dev/pccard/pccard_cis_quirks.c optional pccard dev/pccard/pccard_device.c optional pccard dev/pccard/power_if.m standard dev/pccbb/pccbb.c optional cbb dev/pccbb/pccbb_isa.c optional cbb isa dev/pccbb/pccbb_pci.c optional cbb pci dev/pcf/pcf.c optional pcf dev/pci/fixup_pci.c optional pci dev/pci/hostb_pci.c optional pci dev/pci/ignore_pci.c optional pci dev/pci/isa_pci.c optional pci isa dev/pci/pci.c optional pci dev/pci/pci_if.m standard dev/pci/pci_iov.c optional pci pci_iov dev/pci/pci_iov_if.m standard dev/pci/pci_iov_schema.c optional pci pci_iov dev/pci/pci_pci.c optional pci dev/pci/pci_subr.c optional pci dev/pci/pci_user.c optional pci dev/pci/pcib_if.m standard dev/pci/pcib_support.c standard dev/pci/vga_pci.c optional pci dev/pcn/if_pcn.c optional pcn pci dev/pms/freebsd/driver/ini/src/agtiapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sadisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/mpi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saframe.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sahw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sainit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saint.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sampicmd.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sampirsp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saphy.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sasata.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sasmp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sassp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/satimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/sautil.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/saioctlcmd.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sallsdk/spc/mpidebug.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dminit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmsmp.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmdisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmtimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/discovery/dm/dmmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/sminit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsatcb.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smsathw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/sat/src/smtimer.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdinit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdmisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdesgl.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdport.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdint.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdioctl.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdhw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/ossacmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tddmcmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdsmcmnapi.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/common/tdtimers.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdio.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdcb.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itdinit.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sas/ini/itddisc.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/sat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/ossasat.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/pms/RefTisa/tisa/sassata/sata/host/sathw.c optional pmspcv \ compile-with "${NORMAL_C} -Wunused-variable -Woverflow -Wparentheses -w" dev/ppbus/if_plip.c optional plip dev/ppbus/immio.c optional vpo dev/ppbus/lpbb.c optional lpbb dev/ppbus/lpt.c optional lpt dev/ppbus/pcfclock.c optional pcfclock dev/ppbus/ppb_1284.c optional ppbus dev/ppbus/ppb_base.c optional ppbus dev/ppbus/ppb_msq.c optional ppbus dev/ppbus/ppbconf.c optional ppbus dev/ppbus/ppbus_if.m optional ppbus dev/ppbus/ppi.c optional ppi dev/ppbus/pps.c optional pps dev/ppbus/vpo.c optional vpo dev/ppbus/vpoio.c optional vpo dev/ppc/ppc.c optional ppc dev/ppc/ppc_acpi.c optional ppc acpi dev/ppc/ppc_isa.c optional ppc isa dev/ppc/ppc_pci.c optional ppc pci dev/ppc/ppc_puc.c optional ppc puc dev/proto/proto_bus_isa.c optional proto acpi | proto isa dev/proto/proto_bus_pci.c optional proto pci dev/proto/proto_busdma.c optional proto dev/proto/proto_core.c optional proto dev/pst/pst-iop.c optional pst dev/pst/pst-pci.c optional pst pci dev/pst/pst-raid.c optional pst dev/pty/pty.c optional pty dev/puc/puc.c optional puc dev/puc/puc_cfg.c optional puc dev/puc/puc_pccard.c optional puc pccard dev/puc/puc_pci.c optional puc pci dev/quicc/quicc_core.c optional quicc dev/ral/rt2560.c optional ral dev/ral/rt2661.c optional ral dev/ral/rt2860.c optional ral dev/ral/if_ral_pci.c optional ral pci rt2561fw.c optional rt2561fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2561.fw:rt2561fw -mrt2561 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2561fw.c" rt2561fw.fwo optional rt2561fw | ralfw \ dependency "rt2561.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2561fw.fwo" rt2561.fw optional rt2561fw | ralfw \ dependency "$S/contrib/dev/ral/rt2561.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2561.fw" rt2561sfw.c optional rt2561sfw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2561s.fw:rt2561sfw -mrt2561s -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2561sfw.c" rt2561sfw.fwo optional rt2561sfw | ralfw \ dependency "rt2561s.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2561sfw.fwo" rt2561s.fw optional rt2561sfw | ralfw \ dependency "$S/contrib/dev/ral/rt2561s.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2561s.fw" rt2661fw.c optional rt2661fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2661.fw:rt2661fw -mrt2661 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2661fw.c" rt2661fw.fwo optional rt2661fw | ralfw \ dependency "rt2661.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2661fw.fwo" rt2661.fw optional rt2661fw | ralfw \ dependency "$S/contrib/dev/ral/rt2661.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2661.fw" rt2860fw.c optional rt2860fw | ralfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rt2860.fw:rt2860fw -mrt2860 -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rt2860fw.c" rt2860fw.fwo optional rt2860fw | ralfw \ dependency "rt2860.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rt2860fw.fwo" rt2860.fw optional rt2860fw | ralfw \ dependency "$S/contrib/dev/ral/rt2860.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rt2860.fw" dev/random/random_infra.c optional random dev/random/random_harvestq.c optional random dev/random/randomdev.c optional random dev/random/fortuna.c optional random !random_loadable dev/random/hash.c optional random dev/rc/rc.c optional rc dev/rccgpio/rccgpio.c optional rccgpio gpio dev/re/if_re.c optional re dev/rl/if_rl.c optional rl pci dev/rndtest/rndtest.c optional rndtest dev/rp/rp.c optional rp dev/rp/rp_isa.c optional rp isa dev/rp/rp_pci.c optional rp pci # dev/rtwn/if_rtwn.c optional rtwn dev/rtwn/if_rtwn_beacon.c optional rtwn dev/rtwn/if_rtwn_calib.c optional rtwn dev/rtwn/if_rtwn_cam.c optional rtwn dev/rtwn/if_rtwn_efuse.c optional rtwn dev/rtwn/if_rtwn_fw.c optional rtwn dev/rtwn/if_rtwn_rx.c optional rtwn dev/rtwn/if_rtwn_task.c optional rtwn dev/rtwn/if_rtwn_tx.c optional rtwn # dev/rtwn/pci/rtwn_pci_attach.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_reg.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_rx.c optional rtwn_pci pci dev/rtwn/pci/rtwn_pci_tx.c optional rtwn_pci pci # dev/rtwn/usb/rtwn_usb_attach.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_ep.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_reg.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_rx.c optional rtwn_usb dev/rtwn/usb/rtwn_usb_tx.c optional rtwn_usb # RTL8188E dev/rtwn/rtl8188e/r88e_beacon.c optional rtwn dev/rtwn/rtl8188e/r88e_calib.c optional rtwn dev/rtwn/rtl8188e/r88e_chan.c optional rtwn dev/rtwn/rtl8188e/r88e_fw.c optional rtwn dev/rtwn/rtl8188e/r88e_init.c optional rtwn dev/rtwn/rtl8188e/r88e_led.c optional rtwn dev/rtwn/rtl8188e/r88e_tx.c optional rtwn dev/rtwn/rtl8188e/r88e_rf.c optional rtwn dev/rtwn/rtl8188e/r88e_rom.c optional rtwn dev/rtwn/rtl8188e/r88e_rx.c optional rtwn dev/rtwn/rtl8188e/usb/r88eu_attach.c optional rtwn_usb dev/rtwn/rtl8188e/usb/r88eu_init.c optional rtwn_usb dev/rtwn/rtl8188e/usb/r88eu_rx.c optional rtwn_usb # RTL8192C dev/rtwn/rtl8192c/r92c_attach.c optional rtwn dev/rtwn/rtl8192c/r92c_beacon.c optional rtwn dev/rtwn/rtl8192c/r92c_calib.c optional rtwn dev/rtwn/rtl8192c/r92c_chan.c optional rtwn dev/rtwn/rtl8192c/r92c_fw.c optional rtwn dev/rtwn/rtl8192c/r92c_init.c optional rtwn dev/rtwn/rtl8192c/r92c_llt.c optional rtwn dev/rtwn/rtl8192c/r92c_rf.c optional rtwn dev/rtwn/rtl8192c/r92c_rom.c optional rtwn dev/rtwn/rtl8192c/r92c_rx.c optional rtwn dev/rtwn/rtl8192c/r92c_tx.c optional rtwn dev/rtwn/rtl8192c/pci/r92ce_attach.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_calib.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_fw.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_init.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_led.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_rx.c optional rtwn_pci pci dev/rtwn/rtl8192c/pci/r92ce_tx.c optional rtwn_pci pci dev/rtwn/rtl8192c/usb/r92cu_attach.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_init.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_led.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_rx.c optional rtwn_usb dev/rtwn/rtl8192c/usb/r92cu_tx.c optional rtwn_usb # RTL8192E dev/rtwn/rtl8192e/r92e_chan.c optional rtwn dev/rtwn/rtl8192e/r92e_fw.c optional rtwn dev/rtwn/rtl8192e/r92e_init.c optional rtwn dev/rtwn/rtl8192e/r92e_led.c optional rtwn dev/rtwn/rtl8192e/r92e_rf.c optional rtwn dev/rtwn/rtl8192e/r92e_rom.c optional rtwn dev/rtwn/rtl8192e/r92e_rx.c optional rtwn dev/rtwn/rtl8192e/usb/r92eu_attach.c optional rtwn_usb dev/rtwn/rtl8192e/usb/r92eu_init.c optional rtwn_usb # RTL8812A dev/rtwn/rtl8812a/r12a_beacon.c optional rtwn dev/rtwn/rtl8812a/r12a_calib.c optional rtwn dev/rtwn/rtl8812a/r12a_caps.c optional rtwn dev/rtwn/rtl8812a/r12a_chan.c optional rtwn dev/rtwn/rtl8812a/r12a_fw.c optional rtwn dev/rtwn/rtl8812a/r12a_init.c optional rtwn dev/rtwn/rtl8812a/r12a_led.c optional rtwn dev/rtwn/rtl8812a/r12a_rf.c optional rtwn dev/rtwn/rtl8812a/r12a_rom.c optional rtwn dev/rtwn/rtl8812a/r12a_rx.c optional rtwn dev/rtwn/rtl8812a/r12a_tx.c optional rtwn dev/rtwn/rtl8812a/usb/r12au_attach.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_init.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_rx.c optional rtwn_usb dev/rtwn/rtl8812a/usb/r12au_tx.c optional rtwn_usb # RTL8821A dev/rtwn/rtl8821a/r21a_beacon.c optional rtwn dev/rtwn/rtl8821a/r21a_calib.c optional rtwn dev/rtwn/rtl8821a/r21a_chan.c optional rtwn dev/rtwn/rtl8821a/r21a_fw.c optional rtwn dev/rtwn/rtl8821a/r21a_init.c optional rtwn dev/rtwn/rtl8821a/r21a_led.c optional rtwn dev/rtwn/rtl8821a/r21a_rom.c optional rtwn dev/rtwn/rtl8821a/r21a_rx.c optional rtwn dev/rtwn/rtl8821a/usb/r21au_attach.c optional rtwn_usb dev/rtwn/rtl8821a/usb/r21au_dfs.c optional rtwn_usb dev/rtwn/rtl8821a/usb/r21au_init.c optional rtwn_usb rtwn-rtl8188eufw.c optional rtwn-rtl8188eufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8188eufw.fw:rtwn-rtl8188eufw:111 -mrtwn-rtl8188eufw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8188eufw.c" rtwn-rtl8188eufw.fwo optional rtwn-rtl8188eufw | rtwnfw \ dependency "rtwn-rtl8188eufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8188eufw.fwo" rtwn-rtl8188eufw.fw optional rtwn-rtl8188eufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8188eufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8188eufw.fw" rtwn-rtl8192cfwE.c optional rtwn-rtl8192cfwE | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwE.fw:rtwn-rtl8192cfwE:111 -mrtwn-rtl8192cfwE -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwE.c" rtwn-rtl8192cfwE.fwo optional rtwn-rtl8192cfwE | rtwnfw \ dependency "rtwn-rtl8192cfwE.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwE.fwo" rtwn-rtl8192cfwE.fw optional rtwn-rtl8192cfwE | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwE.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwE.fw" rtwn-rtl8192cfwE_B.c optional rtwn-rtl8192cfwE_B | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwE_B.fw:rtwn-rtl8192cfwE_B:111 -mrtwn-rtl8192cfwE_B -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwE_B.c" rtwn-rtl8192cfwE_B.fwo optional rtwn-rtl8192cfwE_B | rtwnfw \ dependency "rtwn-rtl8192cfwE_B.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwE_B.fwo" rtwn-rtl8192cfwE_B.fw optional rtwn-rtl8192cfwE_B | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwE_B.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwE_B.fw" rtwn-rtl8192cfwT.c optional rtwn-rtl8192cfwT | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwT.fw:rtwn-rtl8192cfwT:111 -mrtwn-rtl8192cfwT -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwT.c" rtwn-rtl8192cfwT.fwo optional rtwn-rtl8192cfwT | rtwnfw \ dependency "rtwn-rtl8192cfwT.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwT.fwo" rtwn-rtl8192cfwT.fw optional rtwn-rtl8192cfwT | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwT.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwT.fw" rtwn-rtl8192cfwU.c optional rtwn-rtl8192cfwU | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192cfwU.fw:rtwn-rtl8192cfwU:111 -mrtwn-rtl8192cfwU -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192cfwU.c" rtwn-rtl8192cfwU.fwo optional rtwn-rtl8192cfwU | rtwnfw \ dependency "rtwn-rtl8192cfwU.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192cfwU.fwo" rtwn-rtl8192cfwU.fw optional rtwn-rtl8192cfwU | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192cfwU.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192cfwU.fw" rtwn-rtl8192eufw.c optional rtwn-rtl8192eufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8192eufw.fw:rtwn-rtl8192eufw:111 -mrtwn-rtl8192eufw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8192eufw.c" rtwn-rtl8192eufw.fwo optional rtwn-rtl8192eufw | rtwnfw \ dependency "rtwn-rtl8192eufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8192eufw.fwo" rtwn-rtl8192eufw.fw optional rtwn-rtl8192eufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8192eufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8192eufw.fw" rtwn-rtl8812aufw.c optional rtwn-rtl8812aufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8812aufw.fw:rtwn-rtl8812aufw:111 -mrtwn-rtl8812aufw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8812aufw.c" rtwn-rtl8812aufw.fwo optional rtwn-rtl8812aufw | rtwnfw \ dependency "rtwn-rtl8812aufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8812aufw.fwo" rtwn-rtl8812aufw.fw optional rtwn-rtl8812aufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8812aufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8812aufw.fw" rtwn-rtl8821aufw.c optional rtwn-rtl8821aufw | rtwnfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rtwn-rtl8821aufw.fw:rtwn-rtl8821aufw:111 -mrtwn-rtl8821aufw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rtwn-rtl8821aufw.c" rtwn-rtl8821aufw.fwo optional rtwn-rtl8821aufw | rtwnfw \ dependency "rtwn-rtl8821aufw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rtwn-rtl8821aufw.fwo" rtwn-rtl8821aufw.fw optional rtwn-rtl8821aufw | rtwnfw \ dependency "$S/contrib/dev/rtwn/rtwn-rtl8821aufw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rtwn-rtl8821aufw.fw" dev/safe/safe.c optional safe dev/scc/scc_if.m optional scc dev/scc/scc_bfe_ebus.c optional scc ebus dev/scc/scc_bfe_quicc.c optional scc quicc dev/scc/scc_bfe_sbus.c optional scc fhc | scc sbus dev/scc/scc_core.c optional scc dev/scc/scc_dev_quicc.c optional scc quicc dev/scc/scc_dev_sab82532.c optional scc dev/scc/scc_dev_z8530.c optional scc dev/sdhci/sdhci.c optional sdhci dev/sdhci/sdhci_fdt.c optional sdhci fdt dev/sdhci/sdhci_fdt_gpio.c optional sdhci fdt gpio dev/sdhci/sdhci_if.m optional sdhci dev/sdhci/sdhci_acpi.c optional sdhci acpi dev/sdhci/sdhci_pci.c optional sdhci pci dev/sf/if_sf.c optional sf pci dev/sge/if_sge.c optional sge pci dev/siis/siis.c optional siis pci dev/sis/if_sis.c optional sis pci dev/sk/if_sk.c optional sk pci dev/smbus/smb.c optional smb dev/smbus/smbconf.c optional smbus dev/smbus/smbus.c optional smbus dev/smbus/smbus_if.m optional smbus dev/smc/if_smc.c optional smc dev/smc/if_smc_fdt.c optional smc fdt dev/sn/if_sn.c optional sn dev/sn/if_sn_isa.c optional sn isa dev/sn/if_sn_pccard.c optional sn pccard dev/snp/snp.c optional snp dev/sound/clone.c optional sound dev/sound/unit.c optional sound dev/sound/isa/ad1816.c optional snd_ad1816 isa dev/sound/isa/ess.c optional snd_ess isa dev/sound/isa/gusc.c optional snd_gusc isa dev/sound/isa/mss.c optional snd_mss isa dev/sound/isa/sb16.c optional snd_sb16 isa dev/sound/isa/sb8.c optional snd_sb8 isa dev/sound/isa/sbc.c optional snd_sbc isa dev/sound/isa/sndbuf_dma.c optional sound isa dev/sound/pci/als4000.c optional snd_als4000 pci dev/sound/pci/atiixp.c optional snd_atiixp pci dev/sound/pci/cmi.c optional snd_cmi pci dev/sound/pci/cs4281.c optional snd_cs4281 pci dev/sound/pci/csa.c optional snd_csa pci dev/sound/pci/csapcm.c optional snd_csa pci dev/sound/pci/ds1.c optional snd_ds1 pci dev/sound/pci/emu10k1.c optional snd_emu10k1 pci dev/sound/pci/emu10kx.c optional snd_emu10kx pci dev/sound/pci/emu10kx-pcm.c optional snd_emu10kx pci dev/sound/pci/emu10kx-midi.c optional snd_emu10kx pci dev/sound/pci/envy24.c optional snd_envy24 pci dev/sound/pci/envy24ht.c optional snd_envy24ht pci dev/sound/pci/es137x.c optional snd_es137x pci dev/sound/pci/fm801.c optional snd_fm801 pci dev/sound/pci/ich.c optional snd_ich pci dev/sound/pci/maestro.c optional snd_maestro pci dev/sound/pci/maestro3.c optional snd_maestro3 pci dev/sound/pci/neomagic.c optional snd_neomagic pci dev/sound/pci/solo.c optional snd_solo pci dev/sound/pci/spicds.c optional snd_spicds pci dev/sound/pci/t4dwave.c optional snd_t4dwave pci dev/sound/pci/via8233.c optional snd_via8233 pci dev/sound/pci/via82c686.c optional snd_via82c686 pci dev/sound/pci/vibes.c optional snd_vibes pci dev/sound/pci/hda/hdaa.c optional snd_hda pci dev/sound/pci/hda/hdaa_patches.c optional snd_hda pci dev/sound/pci/hda/hdac.c optional snd_hda pci dev/sound/pci/hda/hdac_if.m optional snd_hda pci dev/sound/pci/hda/hdacc.c optional snd_hda pci dev/sound/pci/hdspe.c optional snd_hdspe pci dev/sound/pci/hdspe-pcm.c optional snd_hdspe pci dev/sound/pcm/ac97.c optional sound dev/sound/pcm/ac97_if.m optional sound dev/sound/pcm/ac97_patch.c optional sound dev/sound/pcm/buffer.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/channel.c optional sound dev/sound/pcm/channel_if.m optional sound dev/sound/pcm/dsp.c optional sound dev/sound/pcm/feeder.c optional sound dev/sound/pcm/feeder_chain.c optional sound dev/sound/pcm/feeder_eq.c optional sound \ dependency "feeder_eq_gen.h" \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_if.m optional sound dev/sound/pcm/feeder_format.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_matrix.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_mixer.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_rate.c optional sound \ dependency "feeder_rate_gen.h" \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/feeder_volume.c optional sound \ dependency "snd_fxdiv_gen.h" dev/sound/pcm/mixer.c optional sound dev/sound/pcm/mixer_if.m optional sound dev/sound/pcm/sndstat.c optional sound dev/sound/pcm/sound.c optional sound dev/sound/pcm/vchan.c optional sound dev/sound/usb/uaudio.c optional snd_uaudio usb dev/sound/usb/uaudio_pcm.c optional snd_uaudio usb dev/sound/midi/midi.c optional sound dev/sound/midi/mpu401.c optional sound dev/sound/midi/mpu_if.m optional sound dev/sound/midi/mpufoi_if.m optional sound dev/sound/midi/sequencer.c optional sound dev/sound/midi/synth_if.m optional sound dev/spibus/ofw_spibus.c optional fdt spibus dev/spibus/spibus.c optional spibus \ dependency "spibus_if.h" dev/spibus/spigen.c optional spigen dev/spibus/spibus_if.m optional spibus dev/ste/if_ste.c optional ste pci dev/stg/tmc18c30.c optional stg dev/stg/tmc18c30_isa.c optional stg isa dev/stg/tmc18c30_pccard.c optional stg pccard dev/stg/tmc18c30_pci.c optional stg pci dev/stg/tmc18c30_subr.c optional stg dev/stge/if_stge.c optional stge dev/sym/sym_hipd.c optional sym \ dependency "$S/dev/sym/sym_{conf,defs}.h" dev/syscons/blank/blank_saver.c optional blank_saver dev/syscons/daemon/daemon_saver.c optional daemon_saver dev/syscons/dragon/dragon_saver.c optional dragon_saver dev/syscons/fade/fade_saver.c optional fade_saver dev/syscons/fire/fire_saver.c optional fire_saver dev/syscons/green/green_saver.c optional green_saver dev/syscons/logo/logo.c optional logo_saver dev/syscons/logo/logo_saver.c optional logo_saver dev/syscons/rain/rain_saver.c optional rain_saver dev/syscons/schistory.c optional sc dev/syscons/scmouse.c optional sc dev/syscons/scterm.c optional sc dev/syscons/scvidctl.c optional sc dev/syscons/snake/snake_saver.c optional snake_saver dev/syscons/star/star_saver.c optional star_saver dev/syscons/syscons.c optional sc dev/syscons/sysmouse.c optional sc dev/syscons/warp/warp_saver.c optional warp_saver dev/tcp_log/tcp_log_dev.c optional tcp_blackbox inet | tcp_blackbox inet6 dev/tdfx/tdfx_linux.c optional tdfx_linux tdfx compat_linux dev/tdfx/tdfx_pci.c optional tdfx pci dev/ti/if_ti.c optional ti pci dev/tl/if_tl.c optional tl pci dev/trm/trm.c optional trm dev/twa/tw_cl_init.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_intr.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_io.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_cl_misc.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_cam.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twa/tw_osl_freebsd.c optional twa \ compile-with "${NORMAL_C} -I$S/dev/twa" dev/twe/twe.c optional twe dev/twe/twe_freebsd.c optional twe dev/tws/tws.c optional tws dev/tws/tws_cam.c optional tws dev/tws/tws_hdm.c optional tws dev/tws/tws_services.c optional tws dev/tws/tws_user.c optional tws dev/tx/if_tx.c optional tx dev/txp/if_txp.c optional txp dev/uart/uart_bus_acpi.c optional uart acpi dev/uart/uart_bus_ebus.c optional uart ebus dev/uart/uart_bus_fdt.c optional uart fdt dev/uart/uart_bus_isa.c optional uart isa dev/uart/uart_bus_pccard.c optional uart pccard dev/uart/uart_bus_pci.c optional uart pci dev/uart/uart_bus_puc.c optional uart puc dev/uart/uart_bus_scc.c optional uart scc dev/uart/uart_core.c optional uart dev/uart/uart_dbg.c optional uart gdb dev/uart/uart_dev_msm.c optional uart uart_msm fdt dev/uart/uart_dev_mvebu.c optional uart uart_mvebu dev/uart/uart_dev_ns8250.c optional uart uart_ns8250 | uart uart_snps dev/uart/uart_dev_pl011.c optional uart pl011 dev/uart/uart_dev_quicc.c optional uart quicc dev/uart/uart_dev_sab82532.c optional uart uart_sab82532 dev/uart/uart_dev_sab82532.c optional uart scc dev/uart/uart_dev_snps.c optional uart uart_snps fdt dev/uart/uart_dev_z8530.c optional uart uart_z8530 dev/uart/uart_dev_z8530.c optional uart scc dev/uart/uart_if.m optional uart dev/uart/uart_subr.c optional uart dev/uart/uart_tty.c optional uart dev/ubsec/ubsec.c optional ubsec # # USB controller drivers # dev/usb/controller/musb_otg.c optional musb dev/usb/controller/dwc_otg.c optional dwcotg dev/usb/controller/dwc_otg_fdt.c optional dwcotg fdt dev/usb/controller/ehci.c optional ehci dev/usb/controller/ehci_msm.c optional ehci_msm fdt dev/usb/controller/ehci_pci.c optional ehci pci dev/usb/controller/ohci.c optional ohci dev/usb/controller/ohci_pci.c optional ohci pci dev/usb/controller/uhci.c optional uhci dev/usb/controller/uhci_pci.c optional uhci pci dev/usb/controller/xhci.c optional xhci dev/usb/controller/xhci_pci.c optional xhci pci dev/usb/controller/saf1761_otg.c optional saf1761otg dev/usb/controller/saf1761_otg_fdt.c optional saf1761otg fdt dev/usb/controller/uss820dci.c optional uss820dci dev/usb/controller/usb_controller.c optional usb # # USB storage drivers # dev/usb/storage/cfumass.c optional cfumass ctl dev/usb/storage/umass.c optional umass dev/usb/storage/urio.c optional urio dev/usb/storage/ustorage_fs.c optional usfs # # USB core # dev/usb/usb_busdma.c optional usb dev/usb/usb_core.c optional usb dev/usb/usb_debug.c optional usb dev/usb/usb_dev.c optional usb dev/usb/usb_device.c optional usb dev/usb/usb_dynamic.c optional usb dev/usb/usb_error.c optional usb dev/usb/usb_generic.c optional usb dev/usb/usb_handle_request.c optional usb dev/usb/usb_hid.c optional usb dev/usb/usb_hub.c optional usb dev/usb/usb_if.m optional usb dev/usb/usb_lookup.c optional usb dev/usb/usb_mbuf.c optional usb dev/usb/usb_msctest.c optional usb dev/usb/usb_parse.c optional usb dev/usb/usb_pf.c optional usb dev/usb/usb_process.c optional usb dev/usb/usb_request.c optional usb dev/usb/usb_transfer.c optional usb dev/usb/usb_util.c optional usb # # USB network drivers # dev/usb/net/if_aue.c optional aue dev/usb/net/if_axe.c optional axe dev/usb/net/if_axge.c optional axge dev/usb/net/if_cdce.c optional cdce dev/usb/net/if_cue.c optional cue dev/usb/net/if_ipheth.c optional ipheth dev/usb/net/if_kue.c optional kue dev/usb/net/if_mos.c optional mos dev/usb/net/if_muge.c optional muge dev/usb/net/if_rue.c optional rue dev/usb/net/if_smsc.c optional smsc dev/usb/net/if_udav.c optional udav dev/usb/net/if_ure.c optional ure dev/usb/net/if_usie.c optional usie dev/usb/net/if_urndis.c optional urndis dev/usb/net/ruephy.c optional rue dev/usb/net/usb_ethernet.c optional uether | aue | axe | axge | cdce | \ cue | ipheth | kue | mos | rue | \ smsc | udav | ure | urndis dev/usb/net/uhso.c optional uhso # # USB WLAN drivers # dev/usb/wlan/if_rsu.c optional rsu rsu-rtl8712fw.c optional rsu-rtl8712fw | rsufw \ compile-with "${AWK} -f $S/tools/fw_stub.awk rsu-rtl8712fw.fw:rsu-rtl8712fw:120 -mrsu-rtl8712fw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "rsu-rtl8712fw.c" rsu-rtl8712fw.fwo optional rsu-rtl8712fw | rsufw \ dependency "rsu-rtl8712fw.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "rsu-rtl8712fw.fwo" rsu-rtl8712fw.fw optional rsu-rtl8712.fw | rsufw \ dependency "$S/contrib/dev/rsu/rsu-rtl8712fw.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "rsu-rtl8712fw.fw" dev/usb/wlan/if_rum.c optional rum dev/usb/wlan/if_run.c optional run runfw.c optional runfw \ compile-with "${AWK} -f $S/tools/fw_stub.awk run.fw:runfw -mrunfw -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "runfw.c" runfw.fwo optional runfw \ dependency "run.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "runfw.fwo" run.fw optional runfw \ dependency "$S/contrib/dev/run/rt2870.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "run.fw" dev/usb/wlan/if_uath.c optional uath dev/usb/wlan/if_upgt.c optional upgt dev/usb/wlan/if_ural.c optional ural dev/usb/wlan/if_urtw.c optional urtw dev/usb/wlan/if_zyd.c optional zyd # # USB serial and parallel port drivers # dev/usb/serial/u3g.c optional u3g dev/usb/serial/uark.c optional uark dev/usb/serial/ubsa.c optional ubsa dev/usb/serial/ubser.c optional ubser dev/usb/serial/uchcom.c optional uchcom dev/usb/serial/ucycom.c optional ucycom dev/usb/serial/ufoma.c optional ufoma dev/usb/serial/uftdi.c optional uftdi dev/usb/serial/ugensa.c optional ugensa dev/usb/serial/uipaq.c optional uipaq dev/usb/serial/ulpt.c optional ulpt dev/usb/serial/umcs.c optional umcs dev/usb/serial/umct.c optional umct dev/usb/serial/umodem.c optional umodem dev/usb/serial/umoscom.c optional umoscom dev/usb/serial/uplcom.c optional uplcom dev/usb/serial/uslcom.c optional uslcom dev/usb/serial/uvisor.c optional uvisor dev/usb/serial/uvscom.c optional uvscom dev/usb/serial/usb_serial.c optional ucom | u3g | uark | ubsa | ubser | \ uchcom | ucycom | ufoma | uftdi | \ ugensa | uipaq | umcs | umct | \ umodem | umoscom | uplcom | usie | \ uslcom | uvisor | uvscom # # USB misc drivers # dev/usb/misc/ufm.c optional ufm dev/usb/misc/udbp.c optional udbp dev/usb/misc/ugold.c optional ugold dev/usb/misc/uled.c optional uled # # USB input drivers # dev/usb/input/atp.c optional atp dev/usb/input/uep.c optional uep dev/usb/input/uhid.c optional uhid dev/usb/input/uhid_snes.c optional uhid_snes dev/usb/input/ukbd.c optional ukbd dev/usb/input/ums.c optional ums dev/usb/input/wmt.c optional wmt dev/usb/input/wsp.c optional wsp # # USB quirks # dev/usb/quirk/usb_quirk.c optional usb # # USB templates # dev/usb/template/usb_template.c optional usb_template dev/usb/template/usb_template_audio.c optional usb_template dev/usb/template/usb_template_cdce.c optional usb_template dev/usb/template/usb_template_kbd.c optional usb_template dev/usb/template/usb_template_modem.c optional usb_template dev/usb/template/usb_template_mouse.c optional usb_template dev/usb/template/usb_template_msc.c optional usb_template dev/usb/template/usb_template_mtp.c optional usb_template dev/usb/template/usb_template_phone.c optional usb_template dev/usb/template/usb_template_serialnet.c optional usb_template dev/usb/template/usb_template_midi.c optional usb_template dev/usb/template/usb_template_multi.c optional usb_template # # USB video drivers # dev/usb/video/udl.c optional udl # # USB END # dev/videomode/videomode.c optional videomode dev/videomode/edid.c optional videomode dev/videomode/pickmode.c optional videomode dev/videomode/vesagtf.c optional videomode dev/veriexec/verified_exec.c optional veriexec mac_veriexec dev/vge/if_vge.c optional vge dev/viapm/viapm.c optional viapm pci dev/virtio/virtio.c optional virtio dev/virtio/virtqueue.c optional virtio dev/virtio/virtio_bus_if.m optional virtio dev/virtio/virtio_if.m optional virtio dev/virtio/pci/virtio_pci.c optional virtio_pci dev/virtio/mmio/virtio_mmio.c optional virtio_mmio dev/virtio/mmio/virtio_mmio_acpi.c optional virtio_mmio acpi dev/virtio/mmio/virtio_mmio_fdt.c optional virtio_mmio fdt dev/virtio/mmio/virtio_mmio_if.m optional virtio_mmio dev/virtio/network/if_vtnet.c optional vtnet dev/virtio/block/virtio_blk.c optional virtio_blk dev/virtio/balloon/virtio_balloon.c optional virtio_balloon dev/virtio/scsi/virtio_scsi.c optional virtio_scsi dev/virtio/random/virtio_random.c optional virtio_random dev/virtio/console/virtio_console.c optional virtio_console dev/vkbd/vkbd.c optional vkbd dev/vr/if_vr.c optional vr pci dev/vt/colors/vt_termcolors.c optional vt dev/vt/font/vt_font_default.c optional vt dev/vt/font/vt_mouse_cursor.c optional vt dev/vt/hw/efifb/efifb.c optional vt_efifb dev/vt/hw/fb/vt_fb.c optional vt dev/vt/hw/vga/vt_vga.c optional vt vt_vga dev/vt/logo/logo_freebsd.c optional vt splash dev/vt/logo/logo_beastie.c optional vt splash dev/vt/vt_buf.c optional vt dev/vt/vt_consolectl.c optional vt dev/vt/vt_core.c optional vt dev/vt/vt_cpulogos.c optional vt splash dev/vt/vt_font.c optional vt dev/vt/vt_sysmouse.c optional vt dev/vte/if_vte.c optional vte pci dev/vx/if_vx.c optional vx dev/vx/if_vx_pci.c optional vx pci dev/watchdog/watchdog.c standard dev/wb/if_wb.c optional wb pci dev/wi/if_wi.c optional wi dev/wi/if_wi_pccard.c optional wi pccard dev/wi/if_wi_pci.c optional wi pci dev/wpi/if_wpi.c optional wpi pci wpifw.c optional wpifw \ compile-with "${AWK} -f $S/tools/fw_stub.awk wpi.fw:wpifw:153229 -mwpi -c${.TARGET}" \ no-implicit-rule before-depend local \ clean "wpifw.c" wpifw.fwo optional wpifw \ dependency "wpi.fw" \ compile-with "${NORMAL_FWO}" \ no-implicit-rule \ clean "wpifw.fwo" wpi.fw optional wpifw \ dependency "$S/contrib/dev/wpi/iwlwifi-3945-15.32.2.9.fw.uu" \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "wpi.fw" dev/xdma/controller/pl330.c optional xdma pl330 dev/xdma/xdma.c optional xdma dev/xdma/xdma_bank.c optional xdma dev/xdma/xdma_bio.c optional xdma dev/xdma/xdma_fdt_test.c optional xdma xdma_test fdt dev/xdma/xdma_if.m optional xdma dev/xdma/xdma_mbuf.c optional xdma dev/xdma/xdma_queue.c optional xdma dev/xdma/xdma_sg.c optional xdma dev/xdma/xdma_sglist.c optional xdma dev/xe/if_xe.c optional xe dev/xe/if_xe_pccard.c optional xe pccard dev/xen/balloon/balloon.c optional xenhvm dev/xen/blkfront/blkfront.c optional xenhvm dev/xen/blkback/blkback.c optional xenhvm dev/xen/console/xen_console.c optional xenhvm dev/xen/control/control.c optional xenhvm dev/xen/grant_table/grant_table.c optional xenhvm dev/xen/netback/netback.c optional xenhvm dev/xen/netfront/netfront.c optional xenhvm dev/xen/xenpci/xenpci.c optional xenpci dev/xen/timer/timer.c optional xenhvm dev/xen/pvcpu/pvcpu.c optional xenhvm dev/xen/xenstore/xenstore.c optional xenhvm dev/xen/xenstore/xenstore_dev.c optional xenhvm dev/xen/xenstore/xenstored_dev.c optional xenhvm dev/xen/evtchn/evtchn_dev.c optional xenhvm dev/xen/privcmd/privcmd.c optional xenhvm dev/xen/gntdev/gntdev.c optional xenhvm dev/xen/debug/debug.c optional xenhvm dev/xl/if_xl.c optional xl pci dev/xl/xlphy.c optional xl pci fs/autofs/autofs.c optional autofs fs/autofs/autofs_vfsops.c optional autofs fs/autofs/autofs_vnops.c optional autofs fs/deadfs/dead_vnops.c standard fs/devfs/devfs_devs.c standard fs/devfs/devfs_dir.c standard fs/devfs/devfs_rule.c standard fs/devfs/devfs_vfsops.c standard fs/devfs/devfs_vnops.c standard fs/fdescfs/fdesc_vfsops.c optional fdescfs fs/fdescfs/fdesc_vnops.c optional fdescfs fs/fifofs/fifo_vnops.c standard fs/cuse/cuse.c optional cuse fs/fuse/fuse_device.c optional fuse fs/fuse/fuse_file.c optional fuse fs/fuse/fuse_internal.c optional fuse fs/fuse/fuse_io.c optional fuse fs/fuse/fuse_ipc.c optional fuse fs/fuse/fuse_main.c optional fuse fs/fuse/fuse_node.c optional fuse fs/fuse/fuse_vfsops.c optional fuse fs/fuse/fuse_vnops.c optional fuse fs/msdosfs/msdosfs_conv.c optional msdosfs fs/msdosfs/msdosfs_denode.c optional msdosfs fs/msdosfs/msdosfs_fat.c optional msdosfs fs/msdosfs/msdosfs_iconv.c optional msdosfs_iconv fs/msdosfs/msdosfs_lookup.c optional msdosfs fs/msdosfs/msdosfs_vfsops.c optional msdosfs fs/msdosfs/msdosfs_vnops.c optional msdosfs fs/nandfs/bmap.c optional nandfs fs/nandfs/nandfs_alloc.c optional nandfs fs/nandfs/nandfs_bmap.c optional nandfs fs/nandfs/nandfs_buffer.c optional nandfs fs/nandfs/nandfs_cleaner.c optional nandfs fs/nandfs/nandfs_cpfile.c optional nandfs fs/nandfs/nandfs_dat.c optional nandfs fs/nandfs/nandfs_dir.c optional nandfs fs/nandfs/nandfs_ifile.c optional nandfs fs/nandfs/nandfs_segment.c optional nandfs fs/nandfs/nandfs_subr.c optional nandfs fs/nandfs/nandfs_sufile.c optional nandfs fs/nandfs/nandfs_vfsops.c optional nandfs fs/nandfs/nandfs_vnops.c optional nandfs fs/nfs/nfs_commonkrpc.c optional nfscl | nfsd fs/nfs/nfs_commonsubs.c optional nfscl | nfsd fs/nfs/nfs_commonport.c optional nfscl | nfsd fs/nfs/nfs_commonacl.c optional nfscl | nfsd fs/nfsclient/nfs_clcomsubs.c optional nfscl fs/nfsclient/nfs_clsubs.c optional nfscl fs/nfsclient/nfs_clstate.c optional nfscl fs/nfsclient/nfs_clkrpc.c optional nfscl fs/nfsclient/nfs_clrpcops.c optional nfscl fs/nfsclient/nfs_clvnops.c optional nfscl fs/nfsclient/nfs_clnode.c optional nfscl fs/nfsclient/nfs_clvfsops.c optional nfscl fs/nfsclient/nfs_clport.c optional nfscl fs/nfsclient/nfs_clbio.c optional nfscl fs/nfsclient/nfs_clnfsiod.c optional nfscl fs/nfsserver/nfs_fha_new.c optional nfsd inet fs/nfsserver/nfs_nfsdsocket.c optional nfsd inet fs/nfsserver/nfs_nfsdsubs.c optional nfsd inet fs/nfsserver/nfs_nfsdstate.c optional nfsd inet fs/nfsserver/nfs_nfsdkrpc.c optional nfsd inet fs/nfsserver/nfs_nfsdserv.c optional nfsd inet fs/nfsserver/nfs_nfsdport.c optional nfsd inet fs/nfsserver/nfs_nfsdcache.c optional nfsd inet fs/nullfs/null_subr.c optional nullfs fs/nullfs/null_vfsops.c optional nullfs fs/nullfs/null_vnops.c optional nullfs fs/procfs/procfs.c optional procfs fs/procfs/procfs_dbregs.c optional procfs fs/procfs/procfs_fpregs.c optional procfs fs/procfs/procfs_ioctl.c optional procfs fs/procfs/procfs_map.c optional procfs fs/procfs/procfs_mem.c optional procfs fs/procfs/procfs_note.c optional procfs fs/procfs/procfs_osrel.c optional procfs fs/procfs/procfs_regs.c optional procfs fs/procfs/procfs_rlimit.c optional procfs fs/procfs/procfs_status.c optional procfs fs/procfs/procfs_type.c optional procfs fs/pseudofs/pseudofs.c optional pseudofs fs/pseudofs/pseudofs_fileno.c optional pseudofs fs/pseudofs/pseudofs_vncache.c optional pseudofs fs/pseudofs/pseudofs_vnops.c optional pseudofs fs/smbfs/smbfs_io.c optional smbfs fs/smbfs/smbfs_node.c optional smbfs fs/smbfs/smbfs_smb.c optional smbfs fs/smbfs/smbfs_subr.c optional smbfs fs/smbfs/smbfs_vfsops.c optional smbfs fs/smbfs/smbfs_vnops.c optional smbfs fs/udf/osta.c optional udf fs/udf/udf_iconv.c optional udf_iconv fs/udf/udf_vfsops.c optional udf fs/udf/udf_vnops.c optional udf fs/unionfs/union_subr.c optional unionfs fs/unionfs/union_vfsops.c optional unionfs fs/unionfs/union_vnops.c optional unionfs fs/tmpfs/tmpfs_vnops.c optional tmpfs fs/tmpfs/tmpfs_fifoops.c optional tmpfs fs/tmpfs/tmpfs_vfsops.c optional tmpfs fs/tmpfs/tmpfs_subr.c optional tmpfs gdb/gdb_cons.c optional gdb gdb/gdb_main.c optional gdb gdb/gdb_packet.c optional gdb geom/bde/g_bde.c optional geom_bde geom/bde/g_bde_crypt.c optional geom_bde geom/bde/g_bde_lock.c optional geom_bde geom/bde/g_bde_work.c optional geom_bde geom/cache/g_cache.c optional geom_cache geom/concat/g_concat.c optional geom_concat geom/eli/g_eli.c optional geom_eli geom/eli/g_eli_crypto.c optional geom_eli geom/eli/g_eli_ctl.c optional geom_eli geom/eli/g_eli_hmac.c optional geom_eli geom/eli/g_eli_integrity.c optional geom_eli geom/eli/g_eli_key.c optional geom_eli geom/eli/g_eli_key_cache.c optional geom_eli geom/eli/g_eli_privacy.c optional geom_eli geom/eli/pkcs5v2.c optional geom_eli geom/gate/g_gate.c optional geom_gate geom/geom_bsd.c optional geom_bsd geom/geom_bsd_enc.c optional geom_bsd | geom_part_bsd geom/geom_ccd.c optional ccd | geom_ccd geom/geom_ctl.c standard geom/geom_dev.c standard geom/geom_disk.c standard geom/geom_dump.c standard geom/geom_event.c standard geom/geom_fox.c optional geom_fox geom/geom_flashmap.c optional fdt cfi | fdt nand | fdt mx25l | mmcsd | fdt n25q geom/geom_io.c standard geom/geom_kern.c standard geom/geom_map.c optional geom_map geom/geom_mbr.c optional geom_mbr geom/geom_mbr_enc.c optional geom_mbr geom/geom_redboot.c optional geom_redboot geom/geom_slice.c standard geom/geom_subr.c standard geom/geom_sunlabel.c optional geom_sunlabel geom/geom_sunlabel_enc.c optional geom_sunlabel geom/geom_vfs.c standard geom/geom_vol_ffs.c optional geom_vol geom/journal/g_journal.c optional geom_journal geom/journal/g_journal_ufs.c optional geom_journal geom/label/g_label.c optional geom_label | geom_label_gpt geom/label/g_label_ext2fs.c optional geom_label geom/label/g_label_iso9660.c optional geom_label geom/label/g_label_msdosfs.c optional geom_label geom/label/g_label_ntfs.c optional geom_label geom/label/g_label_reiserfs.c optional geom_label geom/label/g_label_ufs.c optional geom_label geom/label/g_label_gpt.c optional geom_label | geom_label_gpt geom/label/g_label_disk_ident.c optional geom_label geom/linux_lvm/g_linux_lvm.c optional geom_linux_lvm geom/mirror/g_mirror.c optional geom_mirror geom/mirror/g_mirror_ctl.c optional geom_mirror geom/mountver/g_mountver.c optional geom_mountver geom/multipath/g_multipath.c optional geom_multipath geom/nop/g_nop.c optional geom_nop geom/part/g_part.c standard geom/part/g_part_if.m standard geom/part/g_part_apm.c optional geom_part_apm geom/part/g_part_bsd.c optional geom_part_bsd geom/part/g_part_bsd64.c optional geom_part_bsd64 geom/part/g_part_ebr.c optional geom_part_ebr geom/part/g_part_gpt.c optional geom_part_gpt geom/part/g_part_ldm.c optional geom_part_ldm geom/part/g_part_mbr.c optional geom_part_mbr geom/part/g_part_vtoc8.c optional geom_part_vtoc8 geom/raid/g_raid.c optional geom_raid geom/raid/g_raid_ctl.c optional geom_raid geom/raid/g_raid_md_if.m optional geom_raid geom/raid/g_raid_tr_if.m optional geom_raid geom/raid/md_ddf.c optional geom_raid geom/raid/md_intel.c optional geom_raid geom/raid/md_jmicron.c optional geom_raid geom/raid/md_nvidia.c optional geom_raid geom/raid/md_promise.c optional geom_raid geom/raid/md_sii.c optional geom_raid geom/raid/tr_concat.c optional geom_raid geom/raid/tr_raid0.c optional geom_raid geom/raid/tr_raid1.c optional geom_raid geom/raid/tr_raid1e.c optional geom_raid geom/raid/tr_raid5.c optional geom_raid geom/raid3/g_raid3.c optional geom_raid3 geom/raid3/g_raid3_ctl.c optional geom_raid3 geom/shsec/g_shsec.c optional geom_shsec geom/stripe/g_stripe.c optional geom_stripe contrib/xz-embedded/freebsd/xz_malloc.c \ optional xz_embedded | geom_uzip \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_crc32.c \ optional xz_embedded | geom_uzip \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_bcj.c \ optional xz_embedded | geom_uzip \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_lzma2.c \ optional xz_embedded | geom_uzip \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" contrib/xz-embedded/linux/lib/xz/xz_dec_stream.c \ optional xz_embedded | geom_uzip \ compile-with "${NORMAL_C} -I$S/contrib/xz-embedded/freebsd/ -I$S/contrib/xz-embedded/linux/lib/xz/ -I$S/contrib/xz-embedded/linux/include/linux/" geom/uzip/g_uzip.c optional geom_uzip geom/uzip/g_uzip_lzma.c optional geom_uzip geom/uzip/g_uzip_wrkthr.c optional geom_uzip geom/uzip/g_uzip_zlib.c optional geom_uzip geom/vinum/geom_vinum.c optional geom_vinum geom/vinum/geom_vinum_create.c optional geom_vinum geom/vinum/geom_vinum_drive.c optional geom_vinum geom/vinum/geom_vinum_plex.c optional geom_vinum geom/vinum/geom_vinum_volume.c optional geom_vinum geom/vinum/geom_vinum_subr.c optional geom_vinum geom/vinum/geom_vinum_raid5.c optional geom_vinum geom/vinum/geom_vinum_share.c optional geom_vinum geom/vinum/geom_vinum_list.c optional geom_vinum geom/vinum/geom_vinum_rm.c optional geom_vinum geom/vinum/geom_vinum_init.c optional geom_vinum geom/vinum/geom_vinum_state.c optional geom_vinum geom/vinum/geom_vinum_rename.c optional geom_vinum geom/vinum/geom_vinum_move.c optional geom_vinum geom/vinum/geom_vinum_events.c optional geom_vinum geom/virstor/binstream.c optional geom_virstor geom/virstor/g_virstor.c optional geom_virstor geom/virstor/g_virstor_md.c optional geom_virstor geom/zero/g_zero.c optional geom_zero fs/ext2fs/ext2_acl.c optional ext2fs fs/ext2fs/ext2_alloc.c optional ext2fs fs/ext2fs/ext2_balloc.c optional ext2fs fs/ext2fs/ext2_bmap.c optional ext2fs fs/ext2fs/ext2_csum.c optional ext2fs fs/ext2fs/ext2_extattr.c optional ext2fs fs/ext2fs/ext2_extents.c optional ext2fs fs/ext2fs/ext2_inode.c optional ext2fs fs/ext2fs/ext2_inode_cnv.c optional ext2fs fs/ext2fs/ext2_hash.c optional ext2fs fs/ext2fs/ext2_htree.c optional ext2fs fs/ext2fs/ext2_lookup.c optional ext2fs fs/ext2fs/ext2_subr.c optional ext2fs fs/ext2fs/ext2_vfsops.c optional ext2fs fs/ext2fs/ext2_vnops.c optional ext2fs # isa/isa_if.m standard isa/isa_common.c optional isa isa/isahint.c optional isa isa/pnp.c optional isa isapnp isa/pnpparse.c optional isa isapnp fs/cd9660/cd9660_bmap.c optional cd9660 fs/cd9660/cd9660_lookup.c optional cd9660 fs/cd9660/cd9660_node.c optional cd9660 fs/cd9660/cd9660_rrip.c optional cd9660 fs/cd9660/cd9660_util.c optional cd9660 fs/cd9660/cd9660_vfsops.c optional cd9660 fs/cd9660/cd9660_vnops.c optional cd9660 fs/cd9660/cd9660_iconv.c optional cd9660_iconv kern/bus_if.m standard kern/clock_if.m standard kern/cpufreq_if.m standard kern/device_if.m standard kern/imgact_binmisc.c optional imagact_binmisc kern/imgact_elf.c standard kern/imgact_elf32.c optional compat_freebsd32 kern/imgact_shell.c standard kern/init_main.c standard kern/init_sysent.c standard kern/ksched.c optional _kposix_priority_scheduling kern/kern_acct.c standard kern/kern_alq.c optional alq kern/kern_clock.c standard kern/kern_condvar.c standard kern/kern_conf.c standard kern/kern_cons.c standard kern/kern_cpu.c standard kern/kern_cpuset.c standard kern/kern_context.c standard kern/kern_descrip.c standard kern/kern_dtrace.c optional kdtrace_hooks kern/kern_dump.c standard kern/kern_environment.c standard kern/kern_et.c standard kern/kern_event.c standard kern/kern_exec.c standard kern/kern_exit.c standard kern/kern_fail.c standard kern/kern_ffclock.c standard kern/kern_fork.c standard kern/kern_hhook.c standard kern/kern_idle.c standard kern/kern_intr.c standard kern/kern_jail.c standard kern/kern_khelp.c standard kern/kern_kthread.c standard kern/kern_ktr.c optional ktr kern/kern_ktrace.c standard kern/kern_linker.c standard kern/kern_lock.c standard kern/kern_lockf.c standard kern/kern_lockstat.c optional kdtrace_hooks kern/kern_loginclass.c standard kern/kern_malloc.c standard kern/kern_mbuf.c standard kern/kern_mib.c standard kern/kern_module.c standard kern/kern_mtxpool.c standard kern/kern_mutex.c standard kern/kern_ntptime.c standard kern/kern_osd.c standard kern/kern_physio.c standard kern/kern_pmc.c standard kern/kern_poll.c optional device_polling kern/kern_priv.c standard kern/kern_proc.c standard kern/kern_procctl.c standard kern/kern_prot.c standard kern/kern_racct.c standard kern/kern_rangelock.c standard kern/kern_rctl.c standard kern/kern_resource.c standard kern/kern_rmlock.c standard kern/kern_rwlock.c standard kern/kern_sdt.c optional kdtrace_hooks kern/kern_sema.c standard kern/kern_sendfile.c standard kern/kern_sharedpage.c standard kern/kern_shutdown.c standard kern/kern_sig.c standard kern/kern_switch.c standard kern/kern_sx.c standard kern/kern_synch.c standard kern/kern_syscalls.c standard kern/kern_sysctl.c standard kern/kern_tc.c standard kern/kern_thr.c standard kern/kern_thread.c standard kern/kern_time.c standard kern/kern_timeout.c standard kern/kern_tslog.c optional tslog kern/kern_umtx.c standard kern/kern_uuid.c standard kern/kern_xxx.c standard kern/link_elf.c standard kern/linker_if.m standard kern/md4c.c optional netsmb kern/md5c.c standard kern/p1003_1b.c standard kern/posix4_mib.c standard kern/sched_4bsd.c optional sched_4bsd kern/sched_ule.c optional sched_ule kern/serdev_if.m standard kern/stack_protector.c standard \ compile-with "${NORMAL_C:N-fstack-protector*}" kern/subr_acl_nfs4.c optional ufs_acl | zfs kern/subr_acl_posix1e.c optional ufs_acl kern/subr_autoconf.c standard kern/subr_blist.c standard kern/subr_boot.c standard kern/subr_bus.c standard kern/subr_bus_dma.c standard kern/subr_bufring.c standard kern/subr_capability.c standard kern/subr_clock.c standard kern/subr_compressor.c standard \ compile-with "${NORMAL_C} -I$S/contrib/zstd/lib/freebsd" kern/subr_counter.c standard kern/subr_devstat.c standard kern/subr_disk.c standard kern/subr_early.c standard kern/subr_epoch.c standard kern/subr_eventhandler.c standard kern/subr_fattime.c standard kern/subr_firmware.c optional firmware kern/subr_gtaskqueue.c standard kern/subr_hash.c standard kern/subr_hints.c standard kern/subr_inflate.c optional gzip kern/subr_kdb.c standard kern/subr_kobj.c standard kern/subr_lock.c standard kern/subr_log.c standard kern/subr_mchain.c optional libmchain kern/subr_module.c standard kern/subr_msgbuf.c standard kern/subr_param.c standard kern/subr_pcpu.c standard kern/subr_pctrie.c standard kern/subr_pidctrl.c standard kern/subr_power.c standard kern/subr_prf.c standard kern/subr_prof.c standard kern/subr_rman.c standard kern/subr_rtc.c standard kern/subr_sbuf.c standard kern/subr_scanf.c standard kern/subr_sglist.c standard kern/subr_sleepqueue.c standard kern/subr_smp.c standard kern/subr_stack.c optional ddb | stack | ktr kern/subr_taskqueue.c standard kern/subr_terminal.c optional vt kern/subr_trap.c standard kern/subr_turnstile.c standard kern/subr_uio.c standard kern/subr_unit.c standard kern/subr_vmem.c standard kern/subr_witness.c optional witness kern/sys_capability.c standard kern/sys_generic.c standard kern/sys_getrandom.c standard kern/sys_pipe.c standard kern/sys_procdesc.c standard kern/sys_process.c standard kern/sys_socket.c standard kern/syscalls.c standard kern/sysv_ipc.c standard kern/sysv_msg.c optional sysvmsg kern/sysv_sem.c optional sysvsem kern/sysv_shm.c optional sysvshm kern/tty.c standard kern/tty_compat.c optional compat_43tty kern/tty_info.c standard kern/tty_inq.c standard kern/tty_outq.c standard kern/tty_pts.c standard kern/tty_tty.c standard kern/tty_ttydisc.c standard kern/uipc_accf.c standard kern/uipc_debug.c optional ddb kern/uipc_domain.c standard kern/uipc_mbuf.c standard kern/uipc_mbuf2.c standard kern/uipc_mbufhash.c standard kern/uipc_mqueue.c optional p1003_1b_mqueue kern/uipc_sem.c optional p1003_1b_semaphores kern/uipc_shm.c standard kern/uipc_sockbuf.c standard kern/uipc_socket.c standard kern/uipc_syscalls.c standard kern/uipc_usrreq.c standard kern/vfs_acl.c standard kern/vfs_aio.c standard kern/vfs_bio.c standard kern/vfs_cache.c standard kern/vfs_cluster.c standard kern/vfs_default.c standard kern/vfs_export.c standard kern/vfs_extattr.c standard kern/vfs_hash.c standard kern/vfs_init.c standard kern/vfs_lookup.c standard kern/vfs_mount.c standard kern/vfs_mountroot.c standard kern/vfs_subr.c standard kern/vfs_syscalls.c standard kern/vfs_vnops.c standard # # Kernel GSS-API # gssd.h optional kgssapi \ dependency "$S/kgssapi/gssd.x" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -hM $S/kgssapi/gssd.x | grep -v pthread.h > gssd.h" \ no-obj no-implicit-rule before-depend local \ clean "gssd.h" gssd_xdr.c optional kgssapi \ dependency "$S/kgssapi/gssd.x gssd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -c $S/kgssapi/gssd.x -o gssd_xdr.c" \ no-implicit-rule before-depend local \ clean "gssd_xdr.c" gssd_clnt.c optional kgssapi \ dependency "$S/kgssapi/gssd.x gssd.h" \ compile-with "RPCGEN_CPP='${CPP}' rpcgen -lM $S/kgssapi/gssd.x | grep -v string.h > gssd_clnt.c" \ no-implicit-rule before-depend local \ clean "gssd_clnt.c" kgssapi/gss_accept_sec_context.c optional kgssapi kgssapi/gss_add_oid_set_member.c optional kgssapi kgssapi/gss_acquire_cred.c optional kgssapi kgssapi/gss_canonicalize_name.c optional kgssapi kgssapi/gss_create_empty_oid_set.c optional kgssapi kgssapi/gss_delete_sec_context.c optional kgssapi kgssapi/gss_display_status.c optional kgssapi kgssapi/gss_export_name.c optional kgssapi kgssapi/gss_get_mic.c optional kgssapi kgssapi/gss_init_sec_context.c optional kgssapi kgssapi/gss_impl.c optional kgssapi kgssapi/gss_import_name.c optional kgssapi kgssapi/gss_names.c optional kgssapi kgssapi/gss_pname_to_uid.c optional kgssapi kgssapi/gss_release_buffer.c optional kgssapi kgssapi/gss_release_cred.c optional kgssapi kgssapi/gss_release_name.c optional kgssapi kgssapi/gss_release_oid_set.c optional kgssapi kgssapi/gss_set_cred_option.c optional kgssapi kgssapi/gss_test_oid_set_member.c optional kgssapi kgssapi/gss_unwrap.c optional kgssapi kgssapi/gss_verify_mic.c optional kgssapi kgssapi/gss_wrap.c optional kgssapi kgssapi/gss_wrap_size_limit.c optional kgssapi kgssapi/gssd_prot.c optional kgssapi kgssapi/krb5/krb5_mech.c optional kgssapi kgssapi/krb5/kcrypto.c optional kgssapi kgssapi/krb5/kcrypto_aes.c optional kgssapi kgssapi/krb5/kcrypto_arcfour.c optional kgssapi kgssapi/krb5/kcrypto_des.c optional kgssapi kgssapi/krb5/kcrypto_des3.c optional kgssapi kgssapi/kgss_if.m optional kgssapi kgssapi/gsstest.c optional kgssapi_debug # These files in libkern/ are those needed by all architectures. Some # of the files in libkern/ are only needed on some architectures, e.g., # libkern/divdi3.c is needed by i386 but not alpha. Also, some of these # routines may be optimized for a particular platform. In either case, # the file should be moved to conf/files. from here. # libkern/arc4random.c standard crypto/chacha20/chacha.c standard libkern/asprintf.c standard libkern/bcd.c standard libkern/bsearch.c standard libkern/crc32.c standard libkern/explicit_bzero.c standard libkern/fnmatch.c standard libkern/iconv.c optional libiconv libkern/iconv_converter_if.m optional libiconv libkern/iconv_ucs.c optional libiconv libkern/iconv_xlat.c optional libiconv libkern/iconv_xlat16.c optional libiconv libkern/inet_aton.c standard libkern/inet_ntoa.c standard libkern/inet_ntop.c standard libkern/inet_pton.c standard libkern/jenkins_hash.c standard libkern/murmur3_32.c standard libkern/mcount.c optional profiling-routine libkern/memcchr.c standard libkern/memchr.c standard libkern/memmem.c optional gdb libkern/qsort.c standard libkern/qsort_r.c standard libkern/random.c standard libkern/scanc.c standard libkern/strcasecmp.c standard libkern/strcat.c standard libkern/strchr.c standard libkern/strcmp.c standard libkern/strcpy.c standard libkern/strcspn.c standard libkern/strdup.c standard libkern/strndup.c standard libkern/strlcat.c standard libkern/strlcpy.c standard libkern/strlen.c standard libkern/strncat.c standard libkern/strncmp.c standard libkern/strncpy.c standard libkern/strnlen.c standard libkern/strrchr.c standard libkern/strsep.c standard libkern/strspn.c standard libkern/strstr.c standard libkern/strtol.c standard libkern/strtoq.c standard libkern/strtoul.c standard libkern/strtouq.c standard libkern/strvalid.c standard libkern/timingsafe_bcmp.c standard libkern/zlib.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | netgraph_deflate | ddb_ctf | gzio net/altq/altq_cbq.c optional altq net/altq/altq_cdnr.c optional altq net/altq/altq_codel.c optional altq net/altq/altq_hfsc.c optional altq net/altq/altq_fairq.c optional altq net/altq/altq_priq.c optional altq net/altq/altq_red.c optional altq net/altq/altq_rio.c optional altq net/altq/altq_rmclass.c optional altq net/altq/altq_subr.c optional altq net/bpf.c standard net/bpf_buffer.c optional bpf net/bpf_jitter.c optional bpf_jitter net/bpf_filter.c optional bpf | netgraph_bpf net/bpf_zerocopy.c optional bpf net/bridgestp.c optional bridge | if_bridge net/flowtable.c optional flowtable inet | flowtable inet6 net/ieee8023ad_lacp.c optional lagg net/if.c standard net/if_bridge.c optional bridge inet | if_bridge inet net/if_clone.c standard net/if_dead.c standard net/if_debug.c optional ddb net/if_disc.c optional disc net/if_edsc.c optional edsc net/if_enc.c optional enc inet | enc inet6 net/if_epair.c optional epair net/if_ethersubr.c optional ether net/if_fwsubr.c optional fwip net/if_gif.c optional gif inet | gif inet6 | \ netgraph_gif inet | netgraph_gif inet6 net/if_gre.c optional gre inet | gre inet6 net/if_ipsec.c optional inet ipsec | inet6 ipsec net/if_lagg.c optional lagg net/if_loop.c optional loop net/if_llatbl.c standard net/if_me.c optional me inet net/if_media.c standard net/if_mib.c standard net/if_spppfr.c optional sppp | netgraph_sppp net/if_spppsubr.c optional sppp | netgraph_sppp net/if_stf.c optional stf inet inet6 net/if_tun.c optional tun net/if_tap.c optional tap net/if_vlan.c optional vlan net/if_vxlan.c optional vxlan inet | vxlan inet6 net/ifdi_if.m optional ether pci net/iflib.c optional ether pci net/iflib_clone.c optional ether pci net/mp_ring.c optional ether net/mppcc.c optional netgraph_mppc_compression net/mppcd.c optional netgraph_mppc_compression net/netisr.c standard net/pfil.c optional ether | inet net/radix.c standard net/radix_mpath.c standard net/raw_cb.c standard net/raw_usrreq.c standard net/route.c standard net/rss_config.c optional inet rss | inet6 rss net/rtsock.c standard net/slcompress.c optional netgraph_vjc | sppp | \ netgraph_sppp net/toeplitz.c optional inet rss | inet6 rss net/vnet.c optional vimage net80211/ieee80211.c optional wlan net80211/ieee80211_acl.c optional wlan wlan_acl net80211/ieee80211_action.c optional wlan net80211/ieee80211_adhoc.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_ageq.c optional wlan net80211/ieee80211_amrr.c optional wlan | wlan_amrr net80211/ieee80211_crypto.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_crypto_ccmp.c optional wlan wlan_ccmp net80211/ieee80211_crypto_none.c optional wlan net80211/ieee80211_crypto_tkip.c optional wlan wlan_tkip net80211/ieee80211_crypto_wep.c optional wlan wlan_wep net80211/ieee80211_ddb.c optional wlan ddb net80211/ieee80211_dfs.c optional wlan net80211/ieee80211_freebsd.c optional wlan net80211/ieee80211_hostap.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_ht.c optional wlan net80211/ieee80211_hwmp.c optional wlan ieee80211_support_mesh net80211/ieee80211_input.c optional wlan net80211/ieee80211_ioctl.c optional wlan net80211/ieee80211_mesh.c optional wlan ieee80211_support_mesh \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_monitor.c optional wlan net80211/ieee80211_node.c optional wlan net80211/ieee80211_output.c optional wlan net80211/ieee80211_phy.c optional wlan net80211/ieee80211_power.c optional wlan net80211/ieee80211_proto.c optional wlan net80211/ieee80211_radiotap.c optional wlan net80211/ieee80211_ratectl.c optional wlan net80211/ieee80211_ratectl_none.c optional wlan net80211/ieee80211_regdomain.c optional wlan net80211/ieee80211_rssadapt.c optional wlan wlan_rssadapt net80211/ieee80211_scan.c optional wlan net80211/ieee80211_scan_sta.c optional wlan net80211/ieee80211_sta.c optional wlan \ compile-with "${NORMAL_C} -Wno-unused-function" net80211/ieee80211_superg.c optional wlan ieee80211_support_superg net80211/ieee80211_scan_sw.c optional wlan net80211/ieee80211_tdma.c optional wlan ieee80211_support_tdma net80211/ieee80211_vht.c optional wlan net80211/ieee80211_wds.c optional wlan net80211/ieee80211_xauth.c optional wlan wlan_xauth net80211/ieee80211_alq.c optional wlan ieee80211_alq netgraph/atm/ccatm/ng_ccatm.c optional ngatm_ccatm \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/ngatmbase.c optional ngatm_atmbase \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscfu/ng_sscfu.c optional ngatm_sscfu \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/sscop/ng_sscop.c optional ngatm_sscop \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/atm/uni/ng_uni.c optional ngatm_uni \ compile-with "${NORMAL_C} -I$S/contrib/ngatm" netgraph/bluetooth/common/ng_bluetooth.c optional netgraph_bluetooth netgraph/bluetooth/drivers/bt3c/ng_bt3c_pccard.c optional netgraph_bluetooth_bt3c netgraph/bluetooth/drivers/h4/ng_h4.c optional netgraph_bluetooth_h4 netgraph/bluetooth/drivers/ubt/ng_ubt.c optional netgraph_bluetooth_ubt usb netgraph/bluetooth/drivers/ubtbcmfw/ubtbcmfw.c optional netgraph_bluetooth_ubtbcmfw usb netgraph/bluetooth/hci/ng_hci_cmds.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_evnt.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_main.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_misc.c optional netgraph_bluetooth_hci netgraph/bluetooth/hci/ng_hci_ulpi.c optional netgraph_bluetooth_hci netgraph/bluetooth/l2cap/ng_l2cap_cmds.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_evnt.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_llpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_main.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_misc.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/l2cap/ng_l2cap_ulpi.c optional netgraph_bluetooth_l2cap netgraph/bluetooth/socket/ng_btsocket.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_hci_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_l2cap_raw.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_rfcomm.c optional netgraph_bluetooth_socket netgraph/bluetooth/socket/ng_btsocket_sco.c optional netgraph_bluetooth_socket netgraph/netflow/netflow.c optional netgraph_netflow netgraph/netflow/netflow_v9.c optional netgraph_netflow netgraph/netflow/ng_netflow.c optional netgraph_netflow netgraph/ng_UI.c optional netgraph_UI netgraph/ng_async.c optional netgraph_async netgraph/ng_atmllc.c optional netgraph_atmllc netgraph/ng_base.c optional netgraph netgraph/ng_bpf.c optional netgraph_bpf netgraph/ng_bridge.c optional netgraph_bridge netgraph/ng_car.c optional netgraph_car netgraph/ng_cisco.c optional netgraph_cisco netgraph/ng_deflate.c optional netgraph_deflate netgraph/ng_device.c optional netgraph_device netgraph/ng_echo.c optional netgraph_echo netgraph/ng_eiface.c optional netgraph_eiface netgraph/ng_ether.c optional netgraph_ether netgraph/ng_ether_echo.c optional netgraph_ether_echo netgraph/ng_frame_relay.c optional netgraph_frame_relay netgraph/ng_gif.c optional netgraph_gif inet6 | netgraph_gif inet netgraph/ng_gif_demux.c optional netgraph_gif_demux netgraph/ng_hole.c optional netgraph_hole netgraph/ng_iface.c optional netgraph_iface netgraph/ng_ip_input.c optional netgraph_ip_input netgraph/ng_ipfw.c optional netgraph_ipfw inet ipfirewall netgraph/ng_ksocket.c optional netgraph_ksocket netgraph/ng_l2tp.c optional netgraph_l2tp netgraph/ng_lmi.c optional netgraph_lmi netgraph/ng_mppc.c optional netgraph_mppc_compression | \ netgraph_mppc_encryption netgraph/ng_nat.c optional netgraph_nat inet libalias netgraph/ng_one2many.c optional netgraph_one2many netgraph/ng_parse.c optional netgraph netgraph/ng_patch.c optional netgraph_patch netgraph/ng_pipe.c optional netgraph_pipe netgraph/ng_ppp.c optional netgraph_ppp netgraph/ng_pppoe.c optional netgraph_pppoe netgraph/ng_pptpgre.c optional netgraph_pptpgre netgraph/ng_pred1.c optional netgraph_pred1 netgraph/ng_rfc1490.c optional netgraph_rfc1490 netgraph/ng_socket.c optional netgraph_socket netgraph/ng_split.c optional netgraph_split netgraph/ng_sppp.c optional netgraph_sppp netgraph/ng_tag.c optional netgraph_tag netgraph/ng_tcpmss.c optional netgraph_tcpmss netgraph/ng_tee.c optional netgraph_tee netgraph/ng_tty.c optional netgraph_tty netgraph/ng_vjc.c optional netgraph_vjc netgraph/ng_vlan.c optional netgraph_vlan netinet/accf_data.c optional accept_filter_data inet netinet/accf_dns.c optional accept_filter_dns inet netinet/accf_http.c optional accept_filter_http inet netinet/if_ether.c optional inet ether netinet/igmp.c optional inet netinet/in.c optional inet netinet/in_debug.c optional inet ddb netinet/in_kdtrace.c optional inet | inet6 netinet/ip_carp.c optional inet carp | inet6 carp netinet/in_fib.c optional inet netinet/in_gif.c optional gif inet | netgraph_gif inet netinet/ip_gre.c optional gre inet netinet/ip_id.c optional inet netinet/in_jail.c optional inet netinet/in_mcast.c optional inet netinet/in_pcb.c optional inet | inet6 netinet/in_pcbgroup.c optional inet pcbgroup | inet6 pcbgroup netinet/in_prot.c optional inet | inet6 netinet/in_proto.c optional inet | inet6 netinet/in_rmx.c optional inet netinet/in_rss.c optional inet rss netinet/ip_divert.c optional inet ipdivert ipfirewall netinet/ip_ecn.c optional inet | inet6 netinet/ip_encap.c optional inet | inet6 netinet/ip_fastfwd.c optional inet netinet/ip_icmp.c optional inet | inet6 netinet/ip_input.c optional inet netinet/ip_mroute.c optional mrouting inet netinet/ip_options.c optional inet netinet/ip_output.c optional inet netinet/ip_reass.c optional inet netinet/raw_ip.c optional inet | inet6 netinet/cc/cc.c optional inet | inet6 netinet/cc/cc_newreno.c optional inet | inet6 netinet/sctp_asconf.c optional inet sctp | inet6 sctp netinet/sctp_auth.c optional inet sctp | inet6 sctp netinet/sctp_bsd_addr.c optional inet sctp | inet6 sctp netinet/sctp_cc_functions.c optional inet sctp | inet6 sctp netinet/sctp_crc32.c optional inet | inet6 netinet/sctp_indata.c optional inet sctp | inet6 sctp netinet/sctp_input.c optional inet sctp | inet6 sctp netinet/sctp_output.c optional inet sctp | inet6 sctp netinet/sctp_pcb.c optional inet sctp | inet6 sctp netinet/sctp_peeloff.c optional inet sctp | inet6 sctp netinet/sctp_ss_functions.c optional inet sctp | inet6 sctp netinet/sctp_syscalls.c optional inet sctp | inet6 sctp netinet/sctp_sysctl.c optional inet sctp | inet6 sctp netinet/sctp_timer.c optional inet sctp | inet6 sctp netinet/sctp_usrreq.c optional inet sctp | inet6 sctp netinet/sctputil.c optional inet sctp | inet6 sctp netinet/siftr.c optional inet siftr alq | inet6 siftr alq netinet/tcp_debug.c optional tcpdebug netinet/tcp_fastopen.c optional inet tcp_rfc7413 | inet6 tcp_rfc7413 netinet/tcp_hostcache.c optional inet | inet6 netinet/tcp_input.c optional inet | inet6 netinet/tcp_log_buf.c optional tcp_blackbox inet | tcp_blackbox inet6 netinet/tcp_lro.c optional inet | inet6 netinet/tcp_output.c optional inet | inet6 netinet/tcp_offload.c optional tcp_offload inet | tcp_offload inet6 netinet/tcp_hpts.c optional tcphpts inet | tcphpts inet6 netinet/tcp_pcap.c optional inet tcppcap | inet6 tcppcap netinet/tcp_reass.c optional inet | inet6 netinet/tcp_sack.c optional inet | inet6 netinet/tcp_subr.c optional inet | inet6 netinet/tcp_syncache.c optional inet | inet6 netinet/tcp_timer.c optional inet | inet6 netinet/tcp_timewait.c optional inet | inet6 netinet/tcp_usrreq.c optional inet | inet6 netinet/udp_usrreq.c optional inet | inet6 netinet/libalias/alias.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_db.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_mod.c optional libalias | netgraph_nat netinet/libalias/alias_proxy.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_util.c optional libalias inet | netgraph_nat inet netinet/libalias/alias_sctp.c optional libalias inet | netgraph_nat inet netinet/netdump/netdump_client.c optional inet netdump netinet6/dest6.c optional inet6 netinet6/frag6.c optional inet6 netinet6/icmp6.c optional inet6 netinet6/in6.c optional inet6 netinet6/in6_cksum.c optional inet6 netinet6/in6_fib.c optional inet6 netinet6/in6_gif.c optional gif inet6 | netgraph_gif inet6 netinet6/in6_ifattach.c optional inet6 netinet6/in6_jail.c optional inet6 netinet6/in6_mcast.c optional inet6 netinet6/in6_pcb.c optional inet6 netinet6/in6_pcbgroup.c optional inet6 pcbgroup netinet6/in6_proto.c optional inet6 netinet6/in6_rmx.c optional inet6 netinet6/in6_rss.c optional inet6 rss netinet6/in6_src.c optional inet6 netinet6/ip6_fastfwd.c optional inet6 netinet6/ip6_forward.c optional inet6 netinet6/ip6_gre.c optional gre inet6 netinet6/ip6_id.c optional inet6 netinet6/ip6_input.c optional inet6 netinet6/ip6_mroute.c optional mrouting inet6 netinet6/ip6_output.c optional inet6 netinet6/mld6.c optional inet6 netinet6/nd6.c optional inet6 netinet6/nd6_nbr.c optional inet6 netinet6/nd6_rtr.c optional inet6 netinet6/raw_ip6.c optional inet6 netinet6/route6.c optional inet6 netinet6/scope6.c optional inet6 netinet6/sctp6_usrreq.c optional inet6 sctp netinet6/udp6_usrreq.c optional inet6 netipsec/ipsec.c optional ipsec inet | ipsec inet6 netipsec/ipsec_input.c optional ipsec inet | ipsec inet6 netipsec/ipsec_mbuf.c optional ipsec inet | ipsec inet6 netipsec/ipsec_mod.c optional ipsec inet | ipsec inet6 netipsec/ipsec_output.c optional ipsec inet | ipsec inet6 netipsec/ipsec_pcb.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/key.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/key_debug.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/keysock.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/subr_ipsec.c optional ipsec inet | ipsec inet6 | \ ipsec_support inet | ipsec_support inet6 netipsec/udpencap.c optional ipsec inet netipsec/xform_ah.c optional ipsec inet | ipsec inet6 netipsec/xform_esp.c optional ipsec inet | ipsec inet6 netipsec/xform_ipcomp.c optional ipsec inet | ipsec inet6 netipsec/xform_tcp.c optional ipsec inet tcp_signature | \ ipsec inet6 tcp_signature | ipsec_support inet tcp_signature | \ ipsec_support inet6 tcp_signature netpfil/ipfw/dn_aqm_codel.c optional inet dummynet netpfil/ipfw/dn_aqm_pie.c optional inet dummynet netpfil/ipfw/dn_heap.c optional inet dummynet netpfil/ipfw/dn_sched_fifo.c optional inet dummynet netpfil/ipfw/dn_sched_fq_codel.c optional inet dummynet netpfil/ipfw/dn_sched_fq_pie.c optional inet dummynet netpfil/ipfw/dn_sched_prio.c optional inet dummynet netpfil/ipfw/dn_sched_qfq.c optional inet dummynet netpfil/ipfw/dn_sched_rr.c optional inet dummynet netpfil/ipfw/dn_sched_wf2q.c optional inet dummynet netpfil/ipfw/ip_dummynet.c optional inet dummynet netpfil/ipfw/ip_dn_io.c optional inet dummynet netpfil/ipfw/ip_dn_glue.c optional inet dummynet netpfil/ipfw/ip_fw2.c optional inet ipfirewall netpfil/ipfw/ip_fw_bpf.c optional inet ipfirewall netpfil/ipfw/ip_fw_dynamic.c optional inet ipfirewall \ compile-with "${NORMAL_C} -I$S/contrib/ck/include" netpfil/ipfw/ip_fw_eaction.c optional inet ipfirewall netpfil/ipfw/ip_fw_log.c optional inet ipfirewall netpfil/ipfw/ip_fw_pfil.c optional inet ipfirewall netpfil/ipfw/ip_fw_sockopt.c optional inet ipfirewall netpfil/ipfw/ip_fw_table.c optional inet ipfirewall netpfil/ipfw/ip_fw_table_algo.c optional inet ipfirewall netpfil/ipfw/ip_fw_table_value.c optional inet ipfirewall netpfil/ipfw/ip_fw_iface.c optional inet ipfirewall netpfil/ipfw/ip_fw_nat.c optional inet ipfirewall_nat netpfil/ipfw/nat64/ip_fw_nat64.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64lsn.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64lsn_control.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64stl.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64stl_control.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nat64/nat64_translate.c optional inet inet6 ipfirewall \ ipfirewall_nat64 netpfil/ipfw/nptv6/ip_fw_nptv6.c optional inet inet6 ipfirewall \ ipfirewall_nptv6 netpfil/ipfw/nptv6/nptv6.c optional inet inet6 ipfirewall \ ipfirewall_nptv6 netpfil/ipfw/pmod/ip_fw_pmod.c optional inet ipfirewall_pmod netpfil/ipfw/pmod/tcpmod.c optional inet ipfirewall_pmod netpfil/pf/if_pflog.c optional pflog pf inet netpfil/pf/if_pfsync.c optional pfsync pf inet netpfil/pf/pf.c optional pf inet netpfil/pf/pf_if.c optional pf inet netpfil/pf/pf_ioctl.c optional pf inet netpfil/pf/pf_lb.c optional pf inet netpfil/pf/pf_norm.c optional pf inet netpfil/pf/pf_osfp.c optional pf inet netpfil/pf/pf_ruleset.c optional pf inet netpfil/pf/pf_table.c optional pf inet netpfil/pf/in4_cksum.c optional pf inet netsmb/smb_conn.c optional netsmb netsmb/smb_crypt.c optional netsmb netsmb/smb_dev.c optional netsmb netsmb/smb_iod.c optional netsmb netsmb/smb_rq.c optional netsmb netsmb/smb_smb.c optional netsmb netsmb/smb_subr.c optional netsmb netsmb/smb_trantcp.c optional netsmb netsmb/smb_usr.c optional netsmb nfs/bootp_subr.c optional bootp nfscl nfs/krpc_subr.c optional bootp nfscl nfs/nfs_diskless.c optional nfscl nfs_root nfs/nfs_fha.c optional nfsd nfs/nfs_lock.c optional nfscl | nfslockd | nfsd nfs/nfs_nfssvc.c optional nfscl | nfsd nlm/nlm_advlock.c optional nfslockd | nfsd nlm/nlm_prot_clnt.c optional nfslockd | nfsd nlm/nlm_prot_impl.c optional nfslockd | nfsd nlm/nlm_prot_server.c optional nfslockd | nfsd nlm/nlm_prot_svc.c optional nfslockd | nfsd nlm/nlm_prot_xdr.c optional nfslockd | nfsd nlm/sm_inter_xdr.c optional nfslockd | nfsd # Linux Kernel Programming Interface compat/linuxkpi/common/src/linux_kmod.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_compat.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_current.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_hrtimer.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_kthread.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_lock.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_page.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_pci.c optional compat_linuxkpi pci \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_tasklet.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_idr.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_radix.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_rcu.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C} -I$S/contrib/ck/include" compat/linuxkpi/common/src/linux_schedule.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_slab.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_usb.c optional compat_linuxkpi usb \ compile-with "${LINUXKPI_C}" compat/linuxkpi/common/src/linux_work.c optional compat_linuxkpi \ compile-with "${LINUXKPI_C}" # OpenFabrics Enterprise Distribution (Infiniband) ofed/drivers/infiniband/core/ib_addr.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_agent.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cache.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cma.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_cq.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_device.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_fmr_pool.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwcm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwpm_msg.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_iwpm_util.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_mad.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_mad_rmpp.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_multicast.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_packer.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_roce_gid_mgmt.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_sa_query.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_smi.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_sysfs.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ucm.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ucma.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_ud_header.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_umem.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_user_mad.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_cmd.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_main.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_uverbs_marshall.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/core/ib_verbs.c optional ofed \ compile-with "${OFED_C}" ofed/drivers/infiniband/ulp/ipoib/ipoib_cm.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" #ofed/drivers/infiniband/ulp/ipoib/ipoib_fs.c optional ipoib \ # compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_ib.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_main.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_multicast.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/ipoib/ipoib_verbs.c optional ipoib \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" #ofed/drivers/infiniband/ulp/ipoib/ipoib_vlan.c optional ipoib \ # compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/ipoib/" ofed/drivers/infiniband/ulp/sdp/sdp_bcopy.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_main.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_rx.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_cma.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" ofed/drivers/infiniband/ulp/sdp/sdp_tx.c optional sdp inet \ compile-with "${OFED_C} -I$S/ofed/drivers/infiniband/ulp/sdp/" dev/mthca/mthca_allocator.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_av.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_catas.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_cmd.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_cq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_eq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mad.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_main.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mcg.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_memfree.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_mr.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_pd.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_profile.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_provider.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_qp.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_reset.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_srq.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mthca/mthca_uar.c optional mthca pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_alias_GUID.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mcg.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_sysfs.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_cm.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_ah.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_cq.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_doorbell.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mad.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_main.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_mr.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_qp.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_srq.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_ib/mlx4_ib_wc.c optional mlx4ib pci ofed \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_alloc.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_catas.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_cmd.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_cq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_eq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_fw.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_fw_qos.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_icm.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_intf.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_main.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_mcg.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_mr.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_pd.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_port.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_profile.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_qp.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_reset.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_sense.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_srq.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_core/mlx4_resource_tracker.c optional mlx4 pci \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_cq.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_main.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_netdev.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_port.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_resources.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_rx.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx4/mlx4_en/mlx4_en_tx.c optional mlx4en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_ah.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_cong.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_cq.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_doorbell.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_gsi.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mad.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_main.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mem.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_mr.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_qp.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_srq.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_ib/mlx5_ib_virt.c optional mlx5ib pci ofed \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_alloc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_cmd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_cq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_diagnostics.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_eq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fs_cmd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fs_tree.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fw.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fwdump.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_fwdump_regmaps.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_health.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mad.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_main.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mcg.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_mr.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_pagealloc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_pd.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_port.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_qp.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_rl.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_srq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_transobj.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_uar.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_vport.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_vsc.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_core/mlx5_wq.c optional mlx5 pci \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_ethtool.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_main.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_tx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_flow_table.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_rx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_rl.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" dev/mlx5/mlx5_en/mlx5_en_txrx.c optional mlx5en pci inet inet6 \ compile-with "${OFED_C}" # crypto support opencrypto/cast.c optional crypto | ipsec | ipsec_support opencrypto/criov.c optional crypto | ipsec | ipsec_support opencrypto/crypto.c optional crypto | ipsec | ipsec_support opencrypto/cryptodev.c optional cryptodev opencrypto/cryptodev_if.m optional crypto | ipsec | ipsec_support opencrypto/cryptosoft.c optional crypto | ipsec | ipsec_support opencrypto/cryptodeflate.c optional crypto | ipsec | ipsec_support opencrypto/gmac.c optional crypto | ipsec | ipsec_support opencrypto/gfmult.c optional crypto | ipsec | ipsec_support opencrypto/rmd160.c optional crypto | ipsec | ipsec_support opencrypto/skipjack.c optional crypto | ipsec | ipsec_support opencrypto/xform.c optional crypto | ipsec | ipsec_support opencrypto/xform_poly1305.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_onetimeauth/poly1305/onetimeauth_poly1305.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_onetimeauth/poly1305/donna/poly1305_donna.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" contrib/libsodium/src/libsodium/crypto_verify/sodium/verify.c \ optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include/sodium -I$S/crypto/libsodium" crypto/libsodium/randombytes.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" crypto/libsodium/utils.c optional crypto \ compile-with "${NORMAL_C} -I$S/contrib/libsodium/src/libsodium/include -I$S/crypto/libsodium" rpc/auth_none.c optional krpc | nfslockd | nfscl | nfsd rpc/auth_unix.c optional krpc | nfslockd | nfscl | nfsd rpc/authunix_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_bck.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_dg.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_rc.c optional krpc | nfslockd | nfscl | nfsd rpc/clnt_vc.c optional krpc | nfslockd | nfscl | nfsd rpc/getnetconfig.c optional krpc | nfslockd | nfscl | nfsd rpc/replay.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_callmsg.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_generic.c optional krpc | nfslockd | nfscl | nfsd rpc/rpc_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcb_clnt.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcb_prot.c optional krpc | nfslockd | nfscl | nfsd rpc/svc.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_auth.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_auth_unix.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_dg.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_generic.c optional krpc | nfslockd | nfscl | nfsd rpc/svc_vc.c optional krpc | nfslockd | nfscl | nfsd rpc/rpcsec_gss/rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_conf.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_misc.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/rpcsec_gss_prot.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi rpc/rpcsec_gss/svc_rpcsec_gss.c optional krpc kgssapi | nfslockd kgssapi | nfscl kgssapi | nfsd kgssapi security/audit/audit.c optional audit security/audit/audit_arg.c optional audit security/audit/audit_bsm.c optional audit security/audit/audit_bsm_db.c optional audit security/audit/audit_bsm_klib.c optional audit security/audit/audit_dtrace.c optional dtaudit audit | dtraceall audit compile-with "${CDDL_C}" security/audit/audit_pipe.c optional audit security/audit/audit_syscalls.c standard security/audit/audit_trigger.c optional audit security/audit/audit_worker.c optional audit security/audit/bsm_domain.c optional audit security/audit/bsm_errno.c optional audit security/audit/bsm_fcntl.c optional audit security/audit/bsm_socket_type.c optional audit security/audit/bsm_token.c optional audit security/mac/mac_audit.c optional mac audit security/mac/mac_cred.c optional mac security/mac/mac_framework.c optional mac security/mac/mac_inet.c optional mac inet | mac inet6 security/mac/mac_inet6.c optional mac inet6 security/mac/mac_label.c optional mac security/mac/mac_net.c optional mac security/mac/mac_pipe.c optional mac security/mac/mac_posix_sem.c optional mac security/mac/mac_posix_shm.c optional mac security/mac/mac_priv.c optional mac security/mac/mac_process.c optional mac security/mac/mac_socket.c optional mac security/mac/mac_syscalls.c standard security/mac/mac_system.c optional mac security/mac/mac_sysv_msg.c optional mac security/mac/mac_sysv_sem.c optional mac security/mac/mac_sysv_shm.c optional mac security/mac/mac_vfs.c optional mac security/mac_biba/mac_biba.c optional mac_biba security/mac_bsdextended/mac_bsdextended.c optional mac_bsdextended security/mac_bsdextended/ugidfw_system.c optional mac_bsdextended security/mac_bsdextended/ugidfw_vnode.c optional mac_bsdextended security/mac_ifoff/mac_ifoff.c optional mac_ifoff security/mac_lomac/mac_lomac.c optional mac_lomac security/mac_mls/mac_mls.c optional mac_mls security/mac_none/mac_none.c optional mac_none security/mac_ntpd/mac_ntpd.c optional mac_ntpd security/mac_partition/mac_partition.c optional mac_partition security/mac_portacl/mac_portacl.c optional mac_portacl security/mac_seeotheruids/mac_seeotheruids.c optional mac_seeotheruids security/mac_stub/mac_stub.c optional mac_stub security/mac_test/mac_test.c optional mac_test security/mac_veriexec/mac_veriexec.c optional mac_veriexec security/mac_veriexec/veriexec_fingerprint.c optional mac_veriexec security/mac_veriexec/veriexec_metadata.c optional mac_veriexec security/mac_veriexec/mac_veriexec_rmd160.c optional mac_veriexec_rmd160 security/mac_veriexec/mac_veriexec_sha1.c optional mac_veriexec_sha1 security/mac_veriexec/mac_veriexec_sha256.c optional mac_veriexec_sha256 security/mac_veriexec/mac_veriexec_sha384.c optional mac_veriexec_sha384 security/mac_veriexec/mac_veriexec_sha512.c optional mac_veriexec_sha512 teken/teken.c optional sc | vt ufs/ffs/ffs_alloc.c optional ffs ufs/ffs/ffs_balloc.c optional ffs ufs/ffs/ffs_inode.c optional ffs ufs/ffs/ffs_snapshot.c optional ffs ufs/ffs/ffs_softdep.c optional ffs ufs/ffs/ffs_subr.c optional ffs | geom_label ufs/ffs/ffs_tables.c optional ffs | geom_label ufs/ffs/ffs_vfsops.c optional ffs ufs/ffs/ffs_vnops.c optional ffs ufs/ffs/ffs_rawread.c optional ffs directio ufs/ffs/ffs_suspend.c optional ffs ufs/ufs/ufs_acl.c optional ffs ufs/ufs/ufs_bmap.c optional ffs ufs/ufs/ufs_dirhash.c optional ffs ufs/ufs/ufs_extattr.c optional ffs ufs/ufs/ufs_gjournal.c optional ffs UFS_GJOURNAL ufs/ufs/ufs_inode.c optional ffs ufs/ufs/ufs_lookup.c optional ffs ufs/ufs/ufs_quota.c optional ffs ufs/ufs/ufs_vfsops.c optional ffs ufs/ufs/ufs_vnops.c optional ffs vm/default_pager.c standard vm/device_pager.c standard vm/phys_pager.c standard vm/redzone.c optional DEBUG_REDZONE vm/sg_pager.c standard vm/swap_pager.c standard vm/uma_core.c standard vm/uma_dbg.c standard vm/memguard.c optional DEBUG_MEMGUARD vm/vm_domainset.c standard vm/vm_fault.c standard vm/vm_glue.c standard vm/vm_init.c standard vm/vm_kern.c standard vm/vm_map.c standard vm/vm_meter.c standard vm/vm_mmap.c standard vm/vm_object.c standard vm/vm_page.c standard vm/vm_pageout.c standard vm/vm_pager.c standard vm/vm_phys.c standard vm/vm_radix.c standard vm/vm_reserv.c standard vm/vm_swapout.c optional !NO_SWAPPING vm/vm_swapout_dummy.c optional NO_SWAPPING vm/vm_unix.c standard vm/vnode_pager.c standard xen/features.c optional xenhvm xen/xenbus/xenbus_if.m optional xenhvm xen/xenbus/xenbus.c optional xenhvm xen/xenbus/xenbusb_if.m optional xenhvm xen/xenbus/xenbusb.c optional xenhvm xen/xenbus/xenbusb_front.c optional xenhvm xen/xenbus/xenbusb_back.c optional xenhvm xen/xenmem/xenmem_if.m optional xenhvm xdr/xdr.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_array.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_mbuf.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_mem.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_reference.c optional krpc | nfslockd | nfscl | nfsd xdr/xdr_sizeof.c optional krpc | nfslockd | nfscl | nfsd Index: head/sys/conf/options =================================================================== --- head/sys/conf/options (revision 339568) +++ head/sys/conf/options (revision 339569) @@ -1,1022 +1,1018 @@ # $FreeBSD$ # # On the handling of kernel options # # All kernel options should be listed in NOTES, with suitable # descriptions. Negative options (options that make some code not # compile) should be commented out; LINT (generated from NOTES) should # compile as much code as possible. Try to structure option-using # code so that a single option only switch code on, or only switch # code off, to make it possible to have a full compile-test. If # necessary, you can check for COMPILING_LINT to get maximum code # coverage. # # All new options shall also be listed in either "conf/options" or # "conf/options.". Options that affect a single source-file # .[c|s] should be directed into "opt_.h", while options # that affect multiple files should either go in "opt_global.h" if # this is a kernel-wide option (used just about everywhere), or in # "opt_.h" if it affects only some files. # Note that the effect of listing only an option without a # header-file-name in conf/options (and cousins) is that the last # convention is followed. # # This handling scheme is not yet fully implemented. # # # Format of this file: # Option name filename # # If filename is missing, the default is # opt_.h AAC_DEBUG opt_aac.h AACRAID_DEBUG opt_aacraid.h AHC_ALLOW_MEMIO opt_aic7xxx.h AHC_TMODE_ENABLE opt_aic7xxx.h AHC_DUMP_EEPROM opt_aic7xxx.h AHC_DEBUG opt_aic7xxx.h AHC_DEBUG_OPTS opt_aic7xxx.h AHC_REG_PRETTY_PRINT opt_aic7xxx.h AHD_DEBUG opt_aic79xx.h AHD_DEBUG_OPTS opt_aic79xx.h AHD_TMODE_ENABLE opt_aic79xx.h AHD_REG_PRETTY_PRINT opt_aic79xx.h TWA_DEBUG opt_twa.h # Debugging options. ALT_BREAK_TO_DEBUGGER opt_kdb.h BREAK_TO_DEBUGGER opt_kdb.h BUF_TRACKING opt_global.h DDB DDB_BUFR_SIZE opt_ddb.h DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h DDB_CAPTURE_MAXBUFSIZE opt_ddb.h DDB_CTF opt_ddb.h DDB_NUMSYM opt_ddb.h FULL_BUF_TRACKING opt_global.h GDB KDB opt_global.h KDB_TRACE opt_kdb.h KDB_UNATTENDED opt_kdb.h KLD_DEBUG opt_kld.h SYSCTL_DEBUG opt_sysctl.h EARLY_PRINTF opt_global.h TEXTDUMP_PREFERRED opt_ddb.h TEXTDUMP_VERBOSE opt_ddb.h NUM_CORE_FILES opt_global.h TSLOG opt_global.h TSLOGSIZE opt_global.h # Miscellaneous options. ALQ ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h ATSE_CFI_HACK opt_cfi.h AUDIT opt_global.h BOOTHOWTO opt_global.h BOOTVERBOSE opt_global.h CALLOUT_PROFILING CAPABILITIES opt_capsicum.h CAPABILITY_MODE opt_capsicum.h COMPAT_43 opt_global.h COMPAT_43TTY opt_global.h COMPAT_FREEBSD4 opt_global.h COMPAT_FREEBSD5 opt_global.h COMPAT_FREEBSD6 opt_global.h COMPAT_FREEBSD7 opt_global.h COMPAT_FREEBSD9 opt_global.h COMPAT_FREEBSD10 opt_global.h COMPAT_FREEBSD11 opt_global.h COMPAT_CLOUDABI32 opt_dontuse.h COMPAT_CLOUDABI64 opt_dontuse.h COMPAT_LINUXKPI opt_dontuse.h _COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists COMPILING_LINT opt_global.h CY_PCI_FASTINTR DEADLKRES opt_watchdog.h EXT_RESOURCES opt_global.h DIRECTIO FILEMON opt_dontuse.h FFCLOCK FULL_PREEMPTION opt_sched.h GZIO opt_gzio.h IMAGACT_BINMISC opt_dontuse.h IPI_PREEMPTION opt_sched.h GEOM_BDE opt_geom.h GEOM_BSD opt_geom.h GEOM_CACHE opt_geom.h GEOM_CONCAT opt_geom.h GEOM_ELI opt_geom.h GEOM_FOX opt_geom.h GEOM_GATE opt_geom.h GEOM_JOURNAL opt_geom.h GEOM_LABEL opt_geom.h GEOM_LABEL_GPT opt_geom.h GEOM_LINUX_LVM opt_geom.h GEOM_MAP opt_geom.h GEOM_MBR opt_geom.h GEOM_MIRROR opt_geom.h GEOM_MOUNTVER opt_geom.h GEOM_MULTIPATH opt_geom.h GEOM_NOP opt_geom.h GEOM_PART_APM opt_geom.h GEOM_PART_BSD opt_geom.h GEOM_PART_BSD64 opt_geom.h GEOM_PART_EBR opt_geom.h GEOM_PART_EBR_COMPAT opt_geom.h GEOM_PART_GPT opt_geom.h GEOM_PART_LDM opt_geom.h GEOM_PART_MBR opt_geom.h GEOM_PART_VTOC8 opt_geom.h GEOM_RAID opt_geom.h GEOM_RAID3 opt_geom.h GEOM_SHSEC opt_geom.h GEOM_STRIPE opt_geom.h GEOM_SUNLABEL opt_geom.h GEOM_UZIP opt_geom.h GEOM_UZIP_DEBUG opt_geom.h GEOM_VINUM opt_geom.h GEOM_VIRSTOR opt_geom.h GEOM_VOL opt_geom.h GEOM_ZERO opt_geom.h IFLIB opt_iflib.h KDTRACE_HOOKS opt_global.h KDTRACE_FRAME opt_kdtrace.h KN_HASHSIZE opt_kqueue.h KSTACK_MAX_PAGES KSTACK_PAGES KSTACK_USAGE_PROF KTRACE KTRACE_REQUEST_POOL opt_ktrace.h LIBICONV MAC opt_global.h MAC_BIBA opt_dontuse.h MAC_BSDEXTENDED opt_dontuse.h MAC_IFOFF opt_dontuse.h MAC_LOMAC opt_dontuse.h MAC_MLS opt_dontuse.h MAC_NONE opt_dontuse.h MAC_NTPD opt_dontuse.h MAC_PARTITION opt_dontuse.h MAC_PORTACL opt_dontuse.h MAC_SEEOTHERUIDS opt_dontuse.h MAC_STATIC opt_mac.h MAC_STUB opt_dontuse.h MAC_TEST opt_dontuse.h MAC_VERIEXEC opt_dontuse.h MAC_VERIEXEC_SHA1 opt_dontuse.h MAC_VERIEXEC_SHA256 opt_dontuse.h MAC_VERIEXEC_SHA384 opt_dontuse.h MAC_VERIEXEC_SHA512 opt_dontuse.h MD_ROOT opt_md.h MD_ROOT_FSTYPE opt_md.h MD_ROOT_READONLY opt_md.h MD_ROOT_SIZE opt_md.h MD_ROOT_MEM opt_md.h MFI_DEBUG opt_mfi.h MFI_DECODE_LOG opt_mfi.h MPROF_BUFFERS opt_mprof.h MPROF_HASH_SIZE opt_mprof.h NEW_PCIB opt_global.h NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h NO_ADAPTIVE_RWLOCKS NO_ADAPTIVE_SX NO_EVENTTIMERS opt_timer.h NO_OBSOLETE_CODE opt_global.h NO_SYSCTL_DESCR opt_global.h NSWBUF_MIN opt_swap.h MBUF_PACKET_ZONE_DISABLE opt_global.h PANIC_REBOOT_WAIT_TIME opt_panic.h PCI_HP opt_pci.h PCI_IOV opt_global.h PPC_DEBUG opt_ppc.h PPC_PROBE_CHIPSET opt_ppc.h PPS_SYNC opt_ntp.h PREEMPTION opt_sched.h QUOTA SCHED_4BSD opt_sched.h SCHED_STATS opt_sched.h SCHED_ULE opt_sched.h SLEEPQUEUE_PROFILING SLHCI_DEBUG opt_slhci.h SPX_HACK STACK opt_stack.h SUIDDIR MSGMNB opt_sysvipc.h MSGMNI opt_sysvipc.h MSGSEG opt_sysvipc.h MSGSSZ opt_sysvipc.h MSGTQL opt_sysvipc.h SEMMNI opt_sysvipc.h SEMMNS opt_sysvipc.h SEMMNU opt_sysvipc.h SEMMSL opt_sysvipc.h SEMOPM opt_sysvipc.h SEMUME opt_sysvipc.h SHMALL opt_sysvipc.h SHMMAX opt_sysvipc.h SHMMAXPGS opt_sysvipc.h SHMMIN opt_sysvipc.h SHMMNI opt_sysvipc.h SHMSEG opt_sysvipc.h SYSVMSG opt_sysvipc.h SYSVSEM opt_sysvipc.h SYSVSHM opt_sysvipc.h SW_WATCHDOG opt_watchdog.h TCPHPTS opt_inet.h TURNSTILE_PROFILING UMTX_PROFILING UMTX_CHAINS opt_global.h VERBOSE_SYSINIT ZSTDIO opt_zstdio.h # POSIX kernel options P1003_1B_MQUEUE opt_posix.h P1003_1B_SEMAPHORES opt_posix.h _KPOSIX_PRIORITY_SCHEDULING opt_posix.h # Do we want the config file compiled into the kernel? INCLUDE_CONFIG_FILE opt_config.h # Options for static filesystems. These should only be used at config # time, since the corresponding lkms cannot work if there are any static # dependencies. Unusability is enforced by hiding the defines for the # options in a never-included header. AUTOFS opt_dontuse.h CD9660 opt_dontuse.h EXT2FS opt_dontuse.h FDESCFS opt_dontuse.h FFS opt_dontuse.h FUSE opt_dontuse.h MSDOSFS opt_dontuse.h NANDFS opt_dontuse.h NULLFS opt_dontuse.h PROCFS opt_dontuse.h PSEUDOFS opt_dontuse.h SMBFS opt_dontuse.h TMPFS opt_dontuse.h UDF opt_dontuse.h UNIONFS opt_dontuse.h ZFS opt_dontuse.h # Pseudofs debugging PSEUDOFS_TRACE opt_pseudofs.h # In-kernel GSS-API KGSSAPI opt_kgssapi.h KGSSAPI_DEBUG opt_kgssapi.h # These static filesystems have one slightly bogus static dependency in # sys/i386/i386/autoconf.c. If any of these filesystems are # statically compiled into the kernel, code for mounting them as root # filesystems will be enabled - but look below. # NFSCL - client # NFSD - server NFSCL opt_nfs.h NFSD opt_nfs.h # filesystems and libiconv bridge CD9660_ICONV opt_dontuse.h MSDOSFS_ICONV opt_dontuse.h UDF_ICONV opt_dontuse.h # If you are following the conditions in the copyright, # you can enable soft-updates which will speed up a lot of thigs # and make the system safer from crashes at the same time. # otherwise a STUB module will be compiled in. SOFTUPDATES opt_ffs.h # On small, embedded systems, it can be useful to turn off support for # snapshots. It saves about 30-40k for a feature that would be lightly # used, if it is used at all. NO_FFS_SNAPSHOT opt_ffs.h # Enabling this option turns on support for Access Control Lists in UFS, # which can be used to support high security configurations. Depends on # UFS_EXTATTR. UFS_ACL opt_ufs.h # Enabling this option turns on support for extended attributes in UFS-based # filesystems, which can be used to support high security configurations # as well as new filesystem features. UFS_EXTATTR opt_ufs.h UFS_EXTATTR_AUTOSTART opt_ufs.h # Enable fast hash lookups for large directories on UFS-based filesystems. UFS_DIRHASH opt_ufs.h # Enable gjournal-based UFS journal. UFS_GJOURNAL opt_ufs.h # The below sentence is not in English, and neither is this one. # We plan to remove the static dependences above, with a # _ROOT option to control if it usable as root. This list # allows these options to be present in config files already (though # they won't make any difference yet). NFS_ROOT opt_nfsroot.h # SMB/CIFS requester NETSMB opt_netsmb.h # Enable netdump(4) client support. NETDUMP opt_global.h # Options used only in subr_param.c. HZ opt_param.h MAXFILES opt_param.h NBUF opt_param.h NSFBUFS opt_param.h VM_BCACHE_SIZE_MAX opt_param.h VM_SWZONE_SIZE_MAX opt_param.h MAXUSERS DFLDSIZ opt_param.h MAXDSIZ opt_param.h MAXSSIZ opt_param.h # Generic SCSI options. CAM_MAX_HIGHPOWER opt_cam.h CAMDEBUG opt_cam.h CAM_DEBUG_COMPILE opt_cam.h CAM_DEBUG_DELAY opt_cam.h CAM_DEBUG_BUS opt_cam.h CAM_DEBUG_TARGET opt_cam.h CAM_DEBUG_LUN opt_cam.h CAM_DEBUG_FLAGS opt_cam.h CAM_BOOT_DELAY opt_cam.h CAM_IOSCHED_DYNAMIC opt_cam.h CAM_TEST_FAILURE opt_cam.h SCSI_DELAY opt_scsi.h SCSI_NO_SENSE_STRINGS opt_scsi.h SCSI_NO_OP_STRINGS opt_scsi.h # Options used only in cam/ata/ata_da.c ATA_STATIC_ID opt_ada.h # Options used only in cam/scsi/scsi_cd.c CHANGER_MIN_BUSY_SECONDS opt_cd.h CHANGER_MAX_BUSY_SECONDS opt_cd.h # Options used only in cam/scsi/scsi_da.c DA_TRACK_REFS opt_da.h # Options used only in cam/scsi/scsi_sa.c. SA_IO_TIMEOUT opt_sa.h SA_SPACE_TIMEOUT opt_sa.h SA_REWIND_TIMEOUT opt_sa.h SA_ERASE_TIMEOUT opt_sa.h SA_1FM_AT_EOD opt_sa.h # Options used only in cam/scsi/scsi_pt.c SCSI_PT_DEFAULT_TIMEOUT opt_pt.h # Options used only in cam/scsi/scsi_ses.c SES_ENABLE_PASSTHROUGH opt_ses.h # Options used in dev/sym/ (Symbios SCSI driver). SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking # disabled:0, enabled:1 (default) SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported # default:8, range:[1..64] # Options used only in dev/ncr/* SCSI_NCR_DEBUG opt_ncr.h SCSI_NCR_MAX_SYNC opt_ncr.h SCSI_NCR_MAX_WIDE opt_ncr.h SCSI_NCR_MYADDR opt_ncr.h # Options used only in dev/isp/* ISP_TARGET_MODE opt_isp.h ISP_FW_CRASH_DUMP opt_isp.h ISP_DEFAULT_ROLES opt_isp.h ISP_INTERNAL_TARGET opt_isp.h ISP_FCTAPE_OFF opt_isp.h # Options used only in dev/iscsi ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h # Net stuff. ACCEPT_FILTER_DATA ACCEPT_FILTER_DNS ACCEPT_FILTER_HTTP ALTQ opt_global.h ALTQ_CBQ opt_altq.h ALTQ_CDNR opt_altq.h ALTQ_CODEL opt_altq.h ALTQ_DEBUG opt_altq.h ALTQ_HFSC opt_altq.h ALTQ_FAIRQ opt_altq.h ALTQ_NOPCC opt_altq.h ALTQ_PRIQ opt_altq.h ALTQ_RED opt_altq.h ALTQ_RIO opt_altq.h BOOTP opt_bootp.h BOOTP_BLOCKSIZE opt_bootp.h BOOTP_COMPAT opt_bootp.h BOOTP_NFSROOT opt_bootp.h BOOTP_NFSV3 opt_bootp.h BOOTP_WIRED_TO opt_bootp.h DEVICE_POLLING DUMMYNET opt_ipdn.h RATELIMIT opt_ratelimit.h RATELIMIT_DEBUG opt_ratelimit.h INET opt_inet.h INET6 opt_inet6.h IPDIVERT IPFILTER opt_ipfilter.h IPFILTER_DEFAULT_BLOCK opt_ipfilter.h IPFILTER_LOG opt_ipfilter.h IPFILTER_LOOKUP opt_ipfilter.h IPFIREWALL opt_ipfw.h IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h IPFIREWALL_NAT opt_ipfw.h IPFIREWALL_NAT64 opt_ipfw.h IPFIREWALL_NPTV6 opt_ipfw.h IPFIREWALL_VERBOSE opt_ipfw.h IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h IPFIREWALL_PMOD opt_ipfw.h IPSEC opt_ipsec.h IPSEC_DEBUG opt_ipsec.h IPSEC_SUPPORT opt_ipsec.h IPSTEALTH KRPC LIBALIAS LIBMCHAIN MBUF_PROFILING MBUF_STRESS_TEST MROUTING opt_mrouting.h NFSLOCKD PCBGROUP opt_pcbgroup.h PF_DEFAULT_TO_DROP opt_pf.h RADIX_MPATH opt_mpath.h ROUTETABLES opt_route.h RSS opt_rss.h SLIP_IFF_OPTS opt_slip.h TCPDEBUG TCPPCAP opt_global.h SIFTR TCP_BLACKBOX opt_global.h TCP_HHOOK opt_inet.h TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading TCP_RFC7413 opt_inet.h TCP_RFC7413_MAX_KEYS opt_inet.h TCP_RFC7413_MAX_PSKS opt_inet.h TCP_SIGNATURE opt_ipsec.h VLAN_ARRAY opt_vlan.h XBONEHACK # # SCTP # SCTP opt_sctp.h SCTP_DEBUG opt_sctp.h # Enable debug printfs SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats # # # # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. # Each netgraph node type can be either be compiled into the kernel # or loaded dynamically. To get the former, include the corresponding # option below. Each type has its own man page, e.g. ng_async(4). NETGRAPH NETGRAPH_DEBUG opt_netgraph.h NETGRAPH_ASYNC opt_netgraph.h NETGRAPH_ATMLLC opt_netgraph.h NETGRAPH_ATM_ATMPIF opt_netgraph.h NETGRAPH_BLUETOOTH opt_netgraph.h NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h NETGRAPH_BLUETOOTH_H4 opt_netgraph.h NETGRAPH_BLUETOOTH_HCI opt_netgraph.h NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h NETGRAPH_BLUETOOTH_UBT opt_netgraph.h NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h NETGRAPH_BPF opt_netgraph.h NETGRAPH_BRIDGE opt_netgraph.h NETGRAPH_CAR opt_netgraph.h NETGRAPH_CISCO opt_netgraph.h NETGRAPH_DEFLATE opt_netgraph.h NETGRAPH_DEVICE opt_netgraph.h NETGRAPH_ECHO opt_netgraph.h NETGRAPH_EIFACE opt_netgraph.h NETGRAPH_ETHER opt_netgraph.h NETGRAPH_ETHER_ECHO opt_netgraph.h NETGRAPH_FEC opt_netgraph.h NETGRAPH_FRAME_RELAY opt_netgraph.h NETGRAPH_GIF opt_netgraph.h NETGRAPH_GIF_DEMUX opt_netgraph.h NETGRAPH_HOLE opt_netgraph.h NETGRAPH_IFACE opt_netgraph.h NETGRAPH_IP_INPUT opt_netgraph.h NETGRAPH_IPFW opt_netgraph.h NETGRAPH_KSOCKET opt_netgraph.h NETGRAPH_L2TP opt_netgraph.h NETGRAPH_LMI opt_netgraph.h NETGRAPH_MPPC_COMPRESSION opt_netgraph.h NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h NETGRAPH_NAT opt_netgraph.h NETGRAPH_NETFLOW opt_netgraph.h NETGRAPH_ONE2MANY opt_netgraph.h NETGRAPH_PATCH opt_netgraph.h NETGRAPH_PIPE opt_netgraph.h NETGRAPH_PPP opt_netgraph.h NETGRAPH_PPPOE opt_netgraph.h NETGRAPH_PPTPGRE opt_netgraph.h NETGRAPH_PRED1 opt_netgraph.h NETGRAPH_RFC1490 opt_netgraph.h NETGRAPH_SOCKET opt_netgraph.h NETGRAPH_SPLIT opt_netgraph.h NETGRAPH_SPPP opt_netgraph.h NETGRAPH_TAG opt_netgraph.h NETGRAPH_TCPMSS opt_netgraph.h NETGRAPH_TEE opt_netgraph.h NETGRAPH_TTY opt_netgraph.h NETGRAPH_UI opt_netgraph.h NETGRAPH_VJC opt_netgraph.h NETGRAPH_VLAN opt_netgraph.h # NgATM options NGATM_ATM opt_netgraph.h NGATM_ATMBASE opt_netgraph.h NGATM_SSCOP opt_netgraph.h NGATM_SSCFU opt_netgraph.h NGATM_UNI opt_netgraph.h NGATM_CCATM opt_netgraph.h # DRM options DRM_DEBUG opt_drm.h TI_SF_BUF_JUMBO opt_ti.h TI_JUMBO_HDRSPLIT opt_ti.h -# DPT driver debug flags -DPT_MEASURE_PERFORMANCE opt_dpt.h -DPT_RESET_HBA opt_dpt.h - # Misc debug flags. Most of these should probably be replaced with # 'DEBUG', and then let people recompile just the interesting modules # with 'make CC="cc -DDEBUG"'. CLUSTERDEBUG opt_debug_cluster.h DEBUG_1284 opt_ppb_1284.h VP0_DEBUG opt_vpo.h LPT_DEBUG opt_lpt.h PLIP_DEBUG opt_plip.h LOCKF_DEBUG opt_debug_lockf.h SI_DEBUG opt_debug_si.h IFMEDIA_DEBUG opt_ifmedia.h # Fb options FB_DEBUG opt_fb.h FB_INSTALL_CDEV opt_fb.h # ppbus related options PERIPH_1284 opt_ppb_1284.h DONTPROBE_1284 opt_ppb_1284.h # smbus related options ENABLE_ALART opt_intpm.h # These cause changes all over the kernel BLKDEV_IOSIZE opt_global.h BURN_BRIDGES opt_global.h DEBUG opt_global.h DEBUG_LOCKS opt_global.h DEBUG_VFS_LOCKS opt_global.h DFLTPHYS opt_global.h DIAGNOSTIC opt_global.h INVARIANT_SUPPORT opt_global.h INVARIANTS opt_global.h KASSERT_PANIC_OPTIONAL opt_global.h MAXCPU opt_global.h MAXMEMDOM opt_global.h MAXPHYS opt_global.h MCLSHIFT opt_global.h MUTEX_NOINLINE opt_global.h LOCK_PROFILING opt_global.h LOCK_PROFILING_FAST opt_global.h MSIZE opt_global.h REGRESSION opt_global.h RWLOCK_NOINLINE opt_global.h SX_NOINLINE opt_global.h VFS_BIO_DEBUG opt_global.h # These are VM related options VM_KMEM_SIZE opt_vm.h VM_KMEM_SIZE_SCALE opt_vm.h VM_KMEM_SIZE_MAX opt_vm.h VM_NRESERVLEVEL opt_vm.h VM_LEVEL_0_ORDER opt_vm.h NO_SWAPPING opt_vm.h MALLOC_MAKE_FAILURES opt_vm.h MALLOC_PROFILE opt_vm.h MALLOC_DEBUG_MAXZONES opt_vm.h # The MemGuard replacement allocator used for tamper-after-free detection DEBUG_MEMGUARD opt_vm.h # The RedZone malloc(9) protection DEBUG_REDZONE opt_vm.h # Standard SMP options EARLY_AP_STARTUP opt_global.h SMP opt_global.h NUMA opt_global.h # Size of the kernel message buffer MSGBUF_SIZE opt_msgbuf.h # NFS options NFS_MINATTRTIMO opt_nfs.h NFS_MAXATTRTIMO opt_nfs.h NFS_MINDIRATTRTIMO opt_nfs.h NFS_MAXDIRATTRTIMO opt_nfs.h NFS_DEBUG opt_nfs.h # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver OVERRIDE_CARD opt_bktr.h OVERRIDE_TUNER opt_bktr.h OVERRIDE_DBX opt_bktr.h OVERRIDE_MSP opt_bktr.h BROOKTREE_SYSTEM_DEFAULT opt_bktr.h BROOKTREE_ALLOC_PAGES opt_bktr.h BKTR_OVERRIDE_CARD opt_bktr.h BKTR_OVERRIDE_TUNER opt_bktr.h BKTR_OVERRIDE_DBX opt_bktr.h BKTR_OVERRIDE_MSP opt_bktr.h BKTR_SYSTEM_DEFAULT opt_bktr.h BKTR_ALLOC_PAGES opt_bktr.h BKTR_USE_PLL opt_bktr.h BKTR_GPIO_ACCESS opt_bktr.h BKTR_NO_MSP_RESET opt_bktr.h BKTR_430_FX_MODE opt_bktr.h BKTR_SIS_VIA_MODE opt_bktr.h BKTR_USE_FREEBSD_SMBUS opt_bktr.h BKTR_NEW_MSP34XX_DRIVER opt_bktr.h # Options for uart(4) UART_PPS_ON_CTS opt_uart.h UART_POLL_FREQ opt_uart.h UART_DEV_TOLERANCE_PCT opt_uart.h # options for bus/device framework BUS_DEBUG opt_bus.h # options for USB support USB_DEBUG opt_usb.h USB_HOST_ALIGN opt_usb.h USB_REQ_DEBUG opt_usb.h USB_TEMPLATE opt_usb.h USB_VERBOSE opt_usb.h USB_DMA_SINGLE_ALLOC opt_usb.h USB_EHCI_BIG_ENDIAN_DESC opt_usb.h U3G_DEBUG opt_u3g.h UKBD_DFLT_KEYMAP opt_ukbd.h UPLCOM_INTR_INTERVAL opt_uplcom.h UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h UVSCOM_INTR_INTERVAL opt_uvscom.h # options for the Realtek rtwn driver RTWN_DEBUG opt_rtwn.h RTWN_WITHOUT_UCODE opt_rtwn.h # Embedded system options INIT_PATH ROOTDEVNAME FDC_DEBUG opt_fdc.h PCFCLOCK_VERBOSE opt_pcfclock.h PCFCLOCK_MAX_RETRIES opt_pcfclock.h KTR opt_global.h KTR_ALQ opt_ktr.h KTR_MASK opt_ktr.h KTR_CPUMASK opt_ktr.h KTR_COMPILE opt_global.h KTR_BOOT_ENTRIES opt_global.h KTR_ENTRIES opt_global.h KTR_VERBOSE opt_ktr.h WITNESS opt_global.h WITNESS_KDB opt_witness.h WITNESS_NO_VNODE opt_witness.h WITNESS_SKIPSPIN opt_witness.h WITNESS_COUNT opt_witness.h OPENSOLARIS_WITNESS opt_global.h # options for ACPI support ACPI_DEBUG opt_acpi.h ACPI_MAX_TASKS opt_acpi.h ACPI_MAX_THREADS opt_acpi.h ACPI_DMAR opt_acpi.h DEV_ACPI opt_acpi.h # ISA support DEV_ISA opt_isa.h ISAPNP opt_isa.h # various 'device presence' options. DEV_BPF opt_bpf.h DEV_CARP opt_carp.h DEV_NETMAP opt_global.h DEV_PCI opt_pci.h DEV_PF opt_pf.h DEV_PFLOG opt_pf.h DEV_PFSYNC opt_pf.h DEV_RANDOM opt_global.h DEV_SPLASH opt_splash.h DEV_VLAN opt_vlan.h # ed driver ED_HPP opt_ed.h ED_3C503 opt_ed.h ED_SIC opt_ed.h # bce driver BCE_DEBUG opt_bce.h BCE_NVRAM_WRITE_SUPPORT opt_bce.h SOCKBUF_DEBUG opt_global.h # options for ubsec driver UBSEC_DEBUG opt_ubsec.h UBSEC_RNDTEST opt_ubsec.h UBSEC_NO_RNG opt_ubsec.h # options for hifn driver HIFN_DEBUG opt_hifn.h HIFN_RNDTEST opt_hifn.h # options for safenet driver SAFE_DEBUG opt_safe.h SAFE_NO_RNG opt_safe.h SAFE_RNDTEST opt_safe.h # syscons/vt options MAXCONS opt_syscons.h SC_ALT_MOUSE_IMAGE opt_syscons.h SC_CUT_SPACES2TABS opt_syscons.h SC_CUT_SEPCHARS opt_syscons.h SC_DEBUG_LEVEL opt_syscons.h SC_DFLT_FONT opt_syscons.h SC_DISABLE_KDBKEY opt_syscons.h SC_DISABLE_REBOOT opt_syscons.h SC_HISTORY_SIZE opt_syscons.h SC_KERNEL_CONS_ATTR opt_syscons.h SC_KERNEL_CONS_ATTRS opt_syscons.h SC_KERNEL_CONS_REV_ATTR opt_syscons.h SC_MOUSE_CHAR opt_syscons.h SC_NO_CUTPASTE opt_syscons.h SC_NO_FONT_LOADING opt_syscons.h SC_NO_HISTORY opt_syscons.h SC_NO_MODE_CHANGE opt_syscons.h SC_NO_SUSPEND_VTYSWITCH opt_syscons.h SC_NO_SYSMOUSE opt_syscons.h SC_NORM_ATTR opt_syscons.h SC_NORM_REV_ATTR opt_syscons.h SC_PIXEL_MODE opt_syscons.h SC_RENDER_DEBUG opt_syscons.h SC_TWOBUTTON_MOUSE opt_syscons.h VT_ALT_TO_ESC_HACK opt_syscons.h VT_FB_DEFAULT_WIDTH opt_syscons.h VT_FB_DEFAULT_HEIGHT opt_syscons.h VT_MAXWINDOWS opt_syscons.h VT_TWOBUTTON_MOUSE opt_syscons.h DEV_SC opt_syscons.h DEV_VT opt_syscons.h # teken terminal emulator options TEKEN_CONS25 opt_teken.h TEKEN_UTF8 opt_teken.h TERMINAL_KERN_ATTR opt_teken.h TERMINAL_NORM_ATTR opt_teken.h # options for printf PRINTF_BUFR_SIZE opt_printf.h BOOT_TAG opt_printf.h BOOT_TAG_SZ opt_printf.h # kbd options KBD_DISABLE_KEYMAP_LOAD opt_kbd.h KBD_INSTALL_CDEV opt_kbd.h KBD_MAXRETRY opt_kbd.h KBD_MAXWAIT opt_kbd.h KBD_RESETDELAY opt_kbd.h KBDIO_DEBUG opt_kbd.h KBDMUX_DFLT_KEYMAP opt_kbdmux.h # options for the Atheros driver ATH_DEBUG opt_ath.h ATH_TXBUF opt_ath.h ATH_RXBUF opt_ath.h ATH_DIAGAPI opt_ath.h ATH_TX99_DIAG opt_ath.h ATH_ENABLE_11N opt_ath.h ATH_ENABLE_DFS opt_ath.h ATH_EEPROM_FIRMWARE opt_ath.h ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h ATH_DEBUG_ALQ opt_ath.h ATH_KTR_INTR_DEBUG opt_ath.h # options for the Atheros hal AH_SUPPORT_AR5416 opt_ah.h # XXX For now, this breaks non-AR9130 chipsets, so only use it # XXX when actually targeting AR9130. AH_SUPPORT_AR9130 opt_ah.h # This is required for AR933x SoC support AH_SUPPORT_AR9330 opt_ah.h AH_SUPPORT_AR9340 opt_ah.h AH_SUPPORT_QCA9530 opt_ah.h AH_SUPPORT_QCA9550 opt_ah.h AH_DEBUG opt_ah.h AH_ASSERT opt_ah.h AH_DEBUG_ALQ opt_ah.h AH_REGOPS_FUNC opt_ah.h AH_WRITE_REGDOMAIN opt_ah.h AH_DEBUG_COUNTRY opt_ah.h AH_WRITE_EEPROM opt_ah.h AH_PRIVATE_DIAG opt_ah.h AH_NEED_DESC_SWAP opt_ah.h AH_USE_INIPDGAIN opt_ah.h AH_MAXCHAN opt_ah.h AH_RXCFG_SDMAMW_4BYTES opt_ah.h AH_INTERRUPT_DEBUGGING opt_ah.h # AR5416 and later interrupt mitigation # XXX do not use this for AR9130 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h # options for the Broadcom BCM43xx driver (bwi) BWI_DEBUG opt_bwi.h BWI_DEBUG_VERBOSE opt_bwi.h # options for the Brodacom BCM43xx driver (bwn) BWN_DEBUG opt_bwn.h BWN_GPL_PHY opt_bwn.h BWN_USE_SIBA opt_bwn.h # Options for the SIBA driver SIBA_DEBUG opt_siba.h # options for the Marvell 8335 wireless driver MALO_DEBUG opt_malo.h MALO_TXBUF opt_malo.h MALO_RXBUF opt_malo.h # options for the Marvell wireless driver MWL_DEBUG opt_mwl.h MWL_TXBUF opt_mwl.h MWL_RXBUF opt_mwl.h MWL_DIAGAPI opt_mwl.h MWL_AGGR_SIZE opt_mwl.h MWL_TX_NODROP opt_mwl.h # Options for the Marvell NETA driver MVNETA_MULTIQUEUE opt_mvneta.h MVNETA_KTR opt_mvneta.h # Options for the Intel 802.11ac wireless driver IWM_DEBUG opt_iwm.h # Options for the Intel 802.11n wireless driver IWN_DEBUG opt_iwn.h # Options for the Intel 3945ABG wireless driver WPI_DEBUG opt_wpi.h # dcons options DCONS_BUF_SIZE opt_dcons.h DCONS_POLL_HZ opt_dcons.h DCONS_FORCE_CONSOLE opt_dcons.h DCONS_FORCE_GDB opt_dcons.h # HWPMC options HWPMC_DEBUG opt_global.h HWPMC_HOOKS HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h # 802.11 support layer IEEE80211_DEBUG opt_wlan.h IEEE80211_DEBUG_REFCNT opt_wlan.h IEEE80211_AMPDU_AGE opt_wlan.h IEEE80211_SUPPORT_MESH opt_wlan.h IEEE80211_SUPPORT_SUPERG opt_wlan.h IEEE80211_SUPPORT_TDMA opt_wlan.h IEEE80211_ALQ opt_wlan.h IEEE80211_DFS_DEBUG opt_wlan.h # 802.11 TDMA support TDMA_SLOTLEN_DEFAULT opt_tdma.h TDMA_SLOTCNT_DEFAULT opt_tdma.h TDMA_BINTVAL_DEFAULT opt_tdma.h TDMA_TXRATE_11B_DEFAULT opt_tdma.h TDMA_TXRATE_11G_DEFAULT opt_tdma.h TDMA_TXRATE_11A_DEFAULT opt_tdma.h TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h TDMA_TXRATE_HALF_DEFAULT opt_tdma.h TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h TDMA_TXRATE_11NA_DEFAULT opt_tdma.h TDMA_TXRATE_11NG_DEFAULT opt_tdma.h # VideoMode PICKMODE_DEBUG opt_videomode.h # Network stack virtualization options VIMAGE opt_global.h VNET_DEBUG opt_global.h # Common Flash Interface (CFI) options CFI_SUPPORT_STRATAFLASH opt_cfi.h CFI_ARMEDANDDANGEROUS opt_cfi.h CFI_HARDWAREBYTESWAP opt_cfi.h # Sound options SND_DEBUG opt_snd.h SND_DIAGNOSTIC opt_snd.h SND_FEEDER_MULTIFORMAT opt_snd.h SND_FEEDER_FULL_MULTIFORMAT opt_snd.h SND_FEEDER_RATE_HP opt_snd.h SND_PCM_64 opt_snd.h SND_OLDSTEREO opt_snd.h X86BIOS # Flattened device tree options FDT opt_platform.h FDT_DTB_STATIC opt_platform.h # OFED Infiniband stack OFED opt_ofed.h OFED_DEBUG_INIT opt_ofed.h SDP opt_ofed.h SDP_DEBUG opt_ofed.h IPOIB opt_ofed.h IPOIB_DEBUG opt_ofed.h IPOIB_CM opt_ofed.h # Resource Accounting RACCT opt_global.h RACCT_DEFAULT_TO_DISABLED opt_global.h # Resource Limits RCTL opt_global.h # Random number generator(s) # With this, no entropy processor is loaded, but the entropy # harvesting infrastructure is present. This means an entropy # processor may be loaded as a module. RANDOM_LOADABLE opt_global.h # This turns on high-rate and potentially expensive harvesting in # the uma slab allocator. RANDOM_ENABLE_UMA opt_global.h RANDOM_ENABLE_ETHER opt_global.h # BHND(4) driver BHND_LOGLEVEL opt_global.h # GPIO and child devices GPIO_SPI_DEBUG opt_gpio.h # SPI devices SPIGEN_LEGACY_CDEVNAME opt_spi.h # etherswitch(4) driver RTL8366_SOFT_RESET opt_etherswitch.h # evdev protocol support EVDEV_SUPPORT opt_evdev.h EVDEV_DEBUG opt_evdev.h UINPUT_DEBUG opt_evdev.h # Hyper-V network driver HN_DEBUG opt_hn.h # CAM-based MMC stack MMCCAM # Encrypted kernel crash dumps EKCD opt_ekcd.h # NVME options NVME_USE_NVD opt_nvme.h # amdsbwd options AMDSBWD_DEBUG opt_amdsbwd.h Index: head/sys/dev/dpt/dpt_pci.c =================================================================== --- head/sys/dev/dpt/dpt_pci.c (revision 339568) +++ head/sys/dev/dpt/dpt_pci.c (nonexistent) @@ -1,189 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2000 Matthew N. Dodd - * All rights reserved. - * - * Copyright (c) 1997 Simon Shapiro - * All Rights Reserved - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -__FBSDID("$FreeBSD$"); - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include - -#include - -#define DPT_VENDOR_ID 0x1044 -#define DPT_DEVICE_ID 0xa400 - -#define DPT_PCI_IOADDR PCIR_BAR(0) /* I/O Address */ -#define DPT_PCI_MEMADDR PCIR_BAR(1) /* Mem I/O Address */ - -#define ISA_PRIMARY_WD_ADDRESS 0x1f8 - -static int dpt_pci_probe (device_t); -static int dpt_pci_attach (device_t); - -static int -dpt_pci_probe (device_t dev) -{ - if ((pci_get_vendor(dev) == DPT_VENDOR_ID) && - (pci_get_device(dev) == DPT_DEVICE_ID)) { - device_set_desc(dev, "DPT Caching SCSI RAID Controller"); - return (BUS_PROBE_DEFAULT); - } - return (ENXIO); -} - -static int -dpt_pci_attach (device_t dev) -{ - dpt_softc_t * dpt; - int error = 0; - - dpt = device_get_softc(dev); - dpt->dev = dev; - dpt_alloc(dev); - -#ifdef DPT_ALLOW_MMIO - dpt->io_rid = DPT_PCI_MEMADDR; - dpt->io_type = SYS_RES_MEMORY; - dpt->io_res = bus_alloc_resource_any(dev, dpt->io_type, - &dpt->io_rid, RF_ACTIVE); -#endif - if (dpt->io_res == NULL) { - dpt->io_rid = DPT_PCI_IOADDR; - dpt->io_type = SYS_RES_IOPORT; - dpt->io_res = bus_alloc_resource_any(dev, dpt->io_type, - &dpt->io_rid, RF_ACTIVE); - } - - if (dpt->io_res == NULL) { - device_printf(dev, "can't allocate register resources\n"); - error = ENOMEM; - goto bad; - } - dpt->io_offset = 0x10; - - dpt->irq_rid = 0; - dpt->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &dpt->irq_rid, - RF_ACTIVE | RF_SHAREABLE); - if (dpt->irq_res == NULL) { - device_printf(dev, "No irq?!\n"); - error = ENOMEM; - goto bad; - } - - /* Ensure busmastering is enabled */ - pci_enable_busmaster(dev); - - if (rman_get_start(dpt->io_res) == (ISA_PRIMARY_WD_ADDRESS - 0x10)) { -#ifdef DPT_DEBUG_WARN - device_printf(dev, "Mapped as an IDE controller. " - "Disabling SCSI setup\n"); -#endif - error = ENXIO; - goto bad; - } - - /* Allocate a dmatag representing the capabilities of this attachment */ - if (bus_dma_tag_create( /* PCI parent */ bus_get_dma_tag(dev), - /* alignemnt */ 1, - /* boundary */ 0, - /* lowaddr */ BUS_SPACE_MAXADDR_32BIT, - /* highaddr */ BUS_SPACE_MAXADDR, - /* filter */ NULL, - /* filterarg */ NULL, - /* maxsize */ BUS_SPACE_MAXSIZE_32BIT, - /* nsegments */ ~0, - /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, - /* flags */ 0, - /* lockfunc */ NULL, - /* lockarg */ NULL, - &dpt->parent_dmat) != 0) { - error = ENXIO; - goto bad; - } - - if (dpt_init(dpt) != 0) { - error = ENXIO; - goto bad; - } - - /* Register with the XPT */ - dpt_attach(dpt); - - if (bus_setup_intr(dev, dpt->irq_res, INTR_TYPE_CAM | INTR_ENTROPY | - INTR_MPSAFE, NULL, dpt_intr, dpt, &dpt->ih)) { - device_printf(dev, "Unable to register interrupt handler\n"); - error = ENXIO; - goto bad; - } - gone_in_dev(dev, 12, "dpt(4) driver"); - - return (error); - -bad: - dpt_release_resources(dev); - - dpt_free(dpt); - - return (error); -} - -static device_method_t dpt_pci_methods[] = { - /* Device interface */ - DEVMETHOD(device_probe, dpt_pci_probe), - DEVMETHOD(device_attach, dpt_pci_attach), - DEVMETHOD(device_detach, dpt_detach), - - { 0, 0 } -}; - -static driver_t dpt_pci_driver = { - "dpt", - dpt_pci_methods, - sizeof(dpt_softc_t), -}; - -DRIVER_MODULE(dpt, pci, dpt_pci_driver, dpt_devclass, 0, 0); -MODULE_DEPEND(dpt, pci, 1, 1, 1); -MODULE_DEPEND(dpt, cam, 1, 1, 1); Property changes on: head/sys/dev/dpt/dpt_pci.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/dev/dpt/dpt.h =================================================================== --- head/sys/dev/dpt/dpt.h (revision 339568) +++ head/sys/dev/dpt/dpt.h (nonexistent) @@ -1,1298 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1997 by Simon Shapiro - * All Rights Reserved - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification, immediately at the beginning of the file. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -/* - * - * dpt.h: Definitions and constants used by the SCSI side of the DPT - * - * credits: Mike Neuffer; DPT low level code and in other areas as well. - * Mark Salyzyn; Many vital bits of info and diagnostics. - * Justin Gibbs; FreeBSD API, debugging and style - * Ron McDaniels; SCSI Software Interrupts - * FreeBSD.ORG; Great O/S to work on and for. - */ - -#ifndef _DPT_H -#define _DPT_H - -#include - - -#undef DPT_USE_DLM_SWI - -#define DPT_RELEASE 1 -#define DPT_VERSION 4 -#define DPT_PATCH 5 -#define DPT_MONTH 8 -#define DPT_DAY 3 -#define DPT_YEAR 18 /* 1998 - 1980 */ - -#define DPT_CTL_RELEASE 1 -#define DPT_CTL_VERSION 0 -#define DPT_CTL_PATCH 6 - -#ifndef PAGESIZ -#define PAGESIZ 4096 -#endif - -#ifndef physaddr -typedef void *physaddr; -#endif - -#undef DPT_INQUIRE_DEVICES /* We have no buyers for this function */ -#define DPT_SUPPORT_POLLING /* Use polled mode at boot (must be ON!) */ -#define DPT_OPENNINGS 8 /* Commands-in-progress per device */ - -#define DPT_RETRIES 5 /* Times to retry failed commands */ -#undef DPT_DISABLE_SG -#define DPT_HAS_OPEN - -/* Arguments to dpt_run_queue() can be: */ - -#define DPT_MAX_TARGET_MODE_BUFFER_SIZE 8192 -#define DPT_FREE_LIST_INCREMENT 64 -#define DPT_CMD_LEN 12 - -/* - * How many segments do we want in a Scatter/Gather list? - * Some HBA's can do 16, Some 8192. Since we pre-allocate - * them in fixed increments, we need to put a practical limit on - * these. A passed parameter (from kernel boot or lkm) would help - */ -#define DPT_MAX_SEGS 32 - -/* Debug levels */ - -#undef DPT_DEBUG_PCI -#undef DPT_DEBUG_INIT -#undef DPT_DEBUG_SETUP -#undef DPT_DEBUG_STATES -#undef DPT_DEBUG_CONFIG -#undef DPT_DEBUG_QUEUES -#undef DPT_DEBUG_SCSI_CMD -#undef DPT_DEBUG_SOFTINTR -#undef DPT_DEBUG_HARDINTR -#undef DPT_DEBUG_HEX_DUMPS -#undef DPT_DEBUG_POLLING -#undef DPT_DEBUG_INQUIRE -#undef DPT_DEBUG_COMPLETION -#undef DPT_DEBUG_COMPLETION_ERRORS -#define DPT_DEBUG_MINPHYS -#undef DPT_DEBUG_SG -#undef DPT_DEBUG_SG_SHOW_DATA -#undef DPT_DEBUG_SCSI_CMD_NAME -#undef DPT_DEBUG_CONTROL -#undef DPT_DEBUG_TIMEOUTS -#undef DPT_DEBUG_SHUTDOWN -#define DPT_DEBUG_USER_CMD - -/* - * Misc. definitions - */ -#undef TRUE -#undef FALSE -#define TRUE 1 -#define FALSE 0 - -#define MAX_CHANNELS 3 -#define MAX_TARGETS 16 -#define MAX_LUNS 8 - -/* Map minor numbers to device identity */ -#define TARGET_MASK 0x000f -#define BUS_MASK 0x0030 -#define HBA_MASK 0x01c0 -#define LUN_MASK 0x0e00 - -#define minor2target(minor) ( minor & TARGET_MASK ) -#define minor2bus(minor) ( (minor & BUS_MASK) >> 4 ) -#define minor2hba(minor) ( (minor & HBA_MASK) >> 6 ) -#define minor2lun(minor) ( (minor & LUN_MASK) >> 9 ) - -/* - * Valid values for cache_type - */ -#define DPT_NO_CACHE 0 -#define DPT_CACHE_WRITETHROUGH 1 -#define DPT_CACHE_WRITEBACK 2 - -#define min(a,b) ((ahost->hostdata)) -#define CD(cmd) ((struct eata_ccb *)(cmd->host_scribble)) -#define SD(host) ((hostdata *)&(host->hostdata)) - -/* - * EATA Command & Register definitions - */ - -#define PCI_REG_DPTconfig 0x40 -#define PCI_REG_PumpModeAddress 0x44 -#define PCI_REG_PumpModeData 0x48 -#define PCI_REG_ConfigParam1 0x50 -#define PCI_REG_ConfigParam2 0x54 - -#define EATA_CMD_RESET 0xf9 -#define EATA_COLD_BOOT 0x06 /* Last resort only! */ - -#define EATA_CMD_IMMEDIATE 0xfa - -#define EATA_CMD_DMA_READ_CONFIG 0xfd -#define EATA_CMD_DMA_SET_CONFIG 0xfe -#define EATA_CMD_DMA_SEND_CP 0xff - -#define ECS_EMULATE_SENSE 0xd4 - -/* - * Immediate Commands - * Beware of this enumeration. Not all commands are in sequence! - */ - -enum dpt_immediate_cmd { - EATA_GENERIC_ABORT, - EATA_SPECIFIC_RESET, - EATA_BUS_RESET, - EATA_SPECIFIC_ABORT, - EATA_QUIET_INTR, - EATA_SMART_ROM_DL_EN, - EATA_COLD_BOOT_HBA, /* Only as a last resort */ - EATA_FORCE_IO, - EATA_SCSI_BUS_OFFLINE, - EATA_RESET_MASKED_BUS, - EATA_POWER_OFF_WARN -}; - -#define HA_CTRLREG 0x206 /* control register for HBA */ -#define HA_CTRL_DISINT 0x02 /* CTRLREG: disable interrupts */ -#define HA_CTRL_RESCPU 0x04 /* CTRLREG: reset processo */ -#define HA_CTRL_8HEADS 0x08 /* - * CTRLREG: set for drives with - * >=8 heads - * (WD1003 rudimentary :-) - */ - -#define HA_WCOMMAND 0x07 /* command register offset */ -#define HA_WIFC 0x06 /* immediate command offset */ -#define HA_WCODE 0x05 -#define HA_WCODE2 0x04 -#define HA_WDMAADDR 0x02 /* DMA address LSB offset */ -#define HA_RERROR 0x01 /* Error Register, offset 1 from base */ -#define HA_RAUXSTAT 0x08 /* aux status register offset */ -#define HA_RSTATUS 0x07 /* status register offset */ -#define HA_RDATA 0x00 /* data register (16bit) */ -#define HA_WDATA 0x00 /* data register (16bit) */ - -#define HA_ABUSY 0x01 /* aux busy bit */ -#define HA_AIRQ 0x02 /* aux IRQ pending bit */ -#define HA_SERROR 0x01 /* pr. command ended in error */ -#define HA_SMORE 0x02 /* more data soon to come */ -#define HA_SCORR 0x04 /* datio_addra corrected */ -#define HA_SDRQ 0x08 /* data request active */ -#define HA_SSC 0x10 /* seek complete */ -#define HA_SFAULT 0x20 /* write fault */ -#define HA_SREADY 0x40 /* drive ready */ -#define HA_SBUSY 0x80 /* drive busy */ -#define HA_SDRDY (HA_SSC|HA_SREADY|HA_SDRQ) - -/* - * Message definitions - */ - -enum dpt_message { - HA_NO_ERROR, /* No Error */ - HA_ERR_SEL_TO, /* Selection Timeout */ - HA_ERR_CMD_TO, /* Command Timeout */ - HA_SCSIBUS_RESET, - HA_HBA_POWER_UP, /* Initial Controller Power-up */ - HA_UNX_BUSPHASE, /* Unexpected Bus Phase */ - HA_UNX_BUS_FREE, /* Unexpected Bus Free */ - HA_BUS_PARITY, /* Bus Parity Error */ - HA_SCSI_HUNG, /* SCSI Hung */ - HA_UNX_MSGRJCT, /* Unexpected Message Rejected */ - HA_RESET_STUCK, /* SCSI Bus Reset Stuck */ - HA_RSENSE_FAIL, /* Auto Request-Sense Failed */ - HA_PARITY_ERR, /* Controller Ram Parity Error */ - HA_CP_ABORT_NA, /* Abort Message sent to non-active cmd */ - HA_CP_ABORTED, /* Abort Message sent to active cmd */ - HA_CP_RESET_NA, /* Reset Message sent to non-active cmd */ - HA_CP_RESET, /* Reset Message sent to active cmd */ - HA_ECC_ERR, /* Controller Ram ECC Error */ - HA_PCI_PARITY, /* PCI Parity Error */ - HA_PCI_MABORT, /* PCI Master Abort */ - HA_PCI_TABORT, /* PCI Target Abort */ - HA_PCI_STABORT /* PCI Signaled Target Abort */ -}; - -#define HA_STATUS_MASK 0x7F -#define HA_IDENTIFY_MSG 0x80 -#define HA_DISCO_RECO 0x40 /* Disconnect/Reconnect */ - -#define DPT_RW_BUFF_HEART 0X00 -#define DPT_RW_BUFF_DLM 0x02 -#define DPT_RW_BUFF_ACCESS 0x03 - -#define HA_INTR_OFF 1 -#define HA_INTR_ON 0 - -/* This is really a one-time shot through some black magic */ -#define DPT_EATA_REVA 0x1c -#define DPT_EATA_REVB 0x1e -#define DPT_EATA_REVC 0x22 -#define DPT_EATA_REVZ 0x24 - - -/* IOCTL List */ - -#define DPT_RW_CMD_LEN 32 -#define DPT_RW_CMD_DUMP_SOFTC "dump softc" -#define DPT_RW_CMD_DUMP_SYSINFO "dump sysinfo" -#define DPT_RW_CMD_DUMP_METRICS "dump metrics" -#define DPT_RW_CMD_CLEAR_METRICS "clear metrics" -#define DPT_RW_CMD_SHOW_LED "show LED" - -#define DPT_IOCTL_INTERNAL_METRICS _IOR('D', 1, dpt_perf_t) -#define DPT_IOCTL_SOFTC _IOR('D', 2, dpt_user_softc_t) -#define DPT_IOCTL_SEND _IOWR('D', 3, eata_pt_t) -#define SDI_SEND 0x40044444 /* Observed from dptmgr */ - -/* - * Other definitions - */ - -#define DPT_HCP_LENGTH(page) (ntohs(*(int16_t *)(void *)(&page[2]))+4) -#define DPT_HCP_FIRST(page) (&page[4]) -#define DPT_HCP_NEXT(param) (¶m[3 + param[3] + 1]) -#define DPT_HCP_CODE(param) (ntohs(*(int16_t *)(void *)param)) - - -/* Possible return values from dpt_register_buffer() */ - -#define SCSI_TM_READ_BUFFER 0x3c -#define SCSI_TM_WRITE_BUFFER 0x3b - -#define SCSI_TM_MODE_MASK 0x07 /* Strip off reserved and LUN */ -#define SCSI_TM_LUN_MASK 0xe0 /* Strip off reserved and LUN */ - -typedef enum { - SUCCESSFULLY_REGISTERED, - DRIVER_DOWN, - ALREADY_REGISTERED, - REGISTERED_TO_ANOTHER, - NOT_REGISTERED, - INVALID_UNIT, - INVALID_SENDER, - INVALID_CALLBACK, - NO_RESOURCES -} dpt_rb_t; - -typedef enum { - REGISTER_BUFFER, - RELEASE_BUFFER -} dpt_rb_op_t; - -/* - * New way for completion routines to reliably copmplete processing. - * Should take properly typed dpt_softc_t and dpt_ccb_t, - * but interdependencies preclude that. - */ -typedef void (*ccb_callback)(void *dpt, int bus, void *ccb); - -typedef void (*buff_wr_done)(int unit, u_int8_t channel, u_int8_t target, - u_int8_t lun, u_int16_t offset, u_int16_t length, - int result); - -typedef void (*dpt_rec_buff)(int unit, u_int8_t channel, u_int8_t target, - u_int8_t lun, void *buffer, u_int16_t offset, - u_int16_t length); - -/* HBA's Status port (register) bitmap */ -typedef struct reg_bit { /* reading this one will clear the interrupt */ - u_int8_t error :1, /* previous command ended in an error */ - more :1, /* More DATA coming soon Poll BSY & DRQ (PIO) */ - corr :1, /* data read was successfully corrected with ECC */ - drq :1, /* data request active */ - sc :1, /* seek complete */ - fault :1, /* write fault */ - ready :1, /* drive ready */ - busy :1; /* controller busy */ -} dpt_status_reg_t; - -/* HBA's Auxiliary status port (register) bitmap */ -typedef struct reg_abit { /* reading this won't clear the interrupt */ - u_int8_t abusy :1, /* auxiliary busy */ - irq :1, /* set when drive interrupt is asserted */ - :6; -} dpt_aux_status_t; - -/* The EATA Register Set as a structure */ -typedef struct eata_register { - u_int8_t data_reg[2]; /* R, couldn't figure this one out */ - u_int8_t cp_addr[4]; /* W, CP address register */ - union { - u_int8_t command; /* - * W, command code: - * [read|set] conf, send CP - */ - struct reg_bit status; /* R, see register_bit1 */ - u_int8_t statusbyte; - } ovr; - struct reg_abit aux_stat; /* R, see register_bit2 */ -} eata_reg_t; - -/* - * Holds the results of a READ_CONFIGURATION command - * Beware of data items which are larger than 1 byte. - * these come from the DPT in network order. - * On an Intel ``CPU'' they will be upside down and backwards! - * The dpt_get_conf function is normally responsible for flipping - * Everything back. - */ -typedef struct get_conf { /* Read Configuration Array */ - union { - struct { - u_int8_t foo_DevType; - u_int8_t foo_PageCode; - u_int8_t foo_Reserved0; - u_int8_t foo_len; - } foo; - u_int32_t foo_length; /* Should return 0x22, 0x24, etc */ - } bar; -#define gcs_length bar.foo_length -#define gcs_PageCode bar.foo.foo_DevType -#define gcs_reserved0 bar.foo.foo_Reserved0 -#define gcs_len bar.foo.foo_len - - u_int32_t signature; /* Signature MUST be "EATA". ntohl()`ed */ - - u_int8_t version2 :4, - version :4; /* EATA Version level */ - - u_int8_t OCS_enabled :1, /* Overlap Command Support enabled */ - TAR_support :1, /* SCSI Target Mode supported */ - TRNXFR :1, /* Truncate Transfer Cmd Used in PIO Mode */ - MORE_support:1, /* MORE supported (PIO Mode Only) */ - DMA_support :1, /* DMA supported */ - DMA_valid :1, /* DRQ value in Byte 30 is valid */ - ATA :1, /* ATA device connected (not supported) */ - HAA_valid :1; /* Hostadapter Address is valid */ - - u_int16_t cppadlen; /* - * Number of pad bytes send after CD data set - * to zero for DMA commands. Ntohl()`ed - */ - u_int8_t scsi_idS; /* SCSI ID of controller 2-0 Byte 0 res. */ - u_int8_t scsi_id2; /* If not, zero is returned */ - u_int8_t scsi_id1; - u_int8_t scsi_id0; - u_int32_t cplen; /* CP length: number of valid cp bytes */ - - u_int32_t splen; /* Returned bytes for a received SP command */ - u_int16_t queuesiz; /* max number of queueable CPs */ - - u_int16_t dummy; - u_int16_t SGsiz; /* max number of SG table entrie */ - - u_int8_t IRQ :4,/* IRQ used this HBA */ - IRQ_TR :1,/* IRQ Trigger: 0=edge, 1=level */ - SECOND :1,/* This is a secondary controller */ - DMA_channel:2;/* DRQ index, DRQ is 2comp of DRQX */ - - u_int8_t sync; /* 0-7 sync active bitmask (deprecated) */ - u_int8_t DSBLE :1, /* ISA i/o addressing is disabled */ - FORCADR :1, /* i/o address has been forced */ - SG_64K :1, - SG_UAE :1, - :4; - - u_int8_t MAX_ID :5, /* Max number of SCSI target IDs */ - MAX_CHAN :3; /* Number of SCSI busses on HBA */ - - u_int8_t MAX_LUN; /* Max number of LUNs */ - u_int8_t :3, - AUTOTRM :1, - M1_inst :1, - ID_qest :1, /* Raidnum ID is questionable */ - is_PCI :1, /* HBA is PCI */ - is_EISA :1; /* HBA is EISA */ - - u_int8_t RAIDNUM; /* unique HBA identifier */ - u_int8_t unused[4]; /* When doing PIO, you GET 512 bytes */ - - /* >>------>> End of The DPT structure <<------<< */ - - u_int32_t length; /* True length, after ntohl conversion */ -} dpt_conf_t; - -/* Scatter-Gather list entry */ -typedef struct dpt_sg_segment { - u_int32_t seg_addr; /* All fields in network byte order */ - u_int32_t seg_len; -} dpt_sg_t; - - -/* Status Packet */ -typedef struct eata_sp { - u_int8_t hba_stat :7, /* HBA status */ - EOC :1; /* True if command finished */ - - u_int8_t scsi_stat; /* Target SCSI status */ - - u_int8_t reserved[2]; - - u_int32_t residue_len; /* Number of bytes not transferred */ - - u_int32_t ccb_busaddr; - - u_int8_t sp_ID_Message; - u_int8_t sp_Que_Message; - u_int8_t sp_Tag_Message; - u_int8_t msg[9]; -} dpt_sp_t; - -/* - * A strange collection of O/S-Hardware releated bits and pieces. - * Used by the dpt_ioctl() entry point to return DPT_SYSINFO command. - */ -typedef struct dpt_drive_parameters { - u_int16_t cylinders; /* Up to 1024 */ - u_int8_t heads; /* Up to 255 */ - u_int8_t sectors; /* Up to 63 */ -} dpt_drive_t; - -typedef struct driveParam_S driveParam_T; - -#define SI_CMOS_Valid 0x0001 -#define SI_NumDrivesValid 0x0002 -#define SI_ProcessorValid 0x0004 -#define SI_MemorySizeValid 0x0008 -#define SI_DriveParamsValid 0x0010 -#define SI_SmartROMverValid 0x0020 -#define SI_OSversionValid 0x0040 -#define SI_OSspecificValid 0x0080 -#define SI_BusTypeValid 0x0100 - -#define SI_ALL_VALID 0x0FFF -#define SI_NO_SmartROM 0x8000 - -#define SI_ISA_BUS 0x00 -#define SI_PCI_BUS 0x04 - -#define HBA_BUS_ISA 0x00 -#define HBA_BUS_PCI 0x02 - -typedef struct dpt_sysinfo { - u_int8_t drive0CMOS; /* CMOS Drive 0 Type */ - u_int8_t drive1CMOS; /* CMOS Drive 1 Type */ - u_int8_t numDrives; /* 0040:0075 contents */ - u_int8_t processorFamily; /* Same as DPTSIG definition */ - u_int8_t processorType; /* Same as DPTSIG definition */ - u_int8_t smartROMMajorVersion; - u_int8_t smartROMMinorVersion; /* SmartROM version */ - u_int8_t smartROMRevision; - u_int16_t flags; /* See bit definitions above */ - u_int16_t conventionalMemSize; /* in KB */ - u_int32_t extendedMemSize; /* in KB */ - u_int32_t osType; /* Same as DPTSIG definition */ - u_int8_t osMajorVersion; - u_int8_t osMinorVersion; /* The OS version */ - u_int8_t osRevision; - u_int8_t osSubRevision; - u_int8_t busType; /* See defininitions above */ - u_int8_t pad[3]; /* For alignment */ - dpt_drive_t drives[16]; /* SmartROM Logical Drives */ -} dpt_sysinfo_t; - -/* SEND_COMMAND packet structure */ -typedef struct eata_ccb { - u_int8_t SCSI_Reset :1, /* Cause a SCSI Bus reset on the cmd */ - HBA_Init :1, /* Cause Controller to reinitialize */ - Auto_Req_Sen :1, /* Do Auto Request Sense on errors */ - scatter :1, /* Data Ptr points to a SG Packet */ - Quick :1, /* Set this one for NO Status PAcket */ - Interpret :1, /* Interpret the SCSI cdb for own use */ - DataOut :1, /* Data Out phase with command */ - DataIn :1; /* Data In phase with command */ - - u_int8_t reqlen; /* Request Sense Length, if Auto_Req_Sen=1 */ - u_int8_t unused[3]; - u_int8_t FWNEST :1, /* send cmd to phys RAID component */ - unused2 :7; - - u_int8_t Phsunit :1, /* physical unit on mirrored pair */ - I_AT :1, /* inhibit address translation */ - Disable_Cache :1, /* HBA inhibit caching */ - :5; - - u_int8_t cp_id :5, /* SCSI Device ID of target */ - cp_channel :3; /* SCSI Channel # of HBA */ - - u_int8_t cp_LUN :5, - cp_luntar :1, /* CP is for target ROUTINE */ - cp_dispri :1, /* Grant disconnect privilege */ - cp_identify :1; /* Always TRUE */ - - u_int8_t cp_msg[3]; /* Message bytes 0-3 */ - - union { - struct { - u_int8_t x_scsi_cmd; /* Partial SCSI CDB def */ - - u_int8_t x_extent :1, - x_bytchk :1, - x_reladr :1, - x_cmplst :1, - x_fmtdata :1, - x_lun :3; - - u_int8_t x_page; - u_int8_t reserved4; - u_int8_t x_len; - u_int8_t x_link :1; - u_int8_t x_flag :1; - u_int8_t reserved5 :4; - u_int8_t x_vendor :2; - } x; - u_int8_t z[12]; /* Command Descriptor Block (= 12) */ - } cp_w; - -#define cp_cdb cp_w.z -#define cp_scsi_cmd cp_w.x.x_scsi_cmd -#define cp_extent cp_w.x.x_extent -#define cp_lun cp_w.x.x_lun -#define cp_page cp_w.x.x_page -#define cp_len cp_w.x.x_len - -#define MULTIFUNCTION_CMD 0x0e /* SCSI Multi Function Cmd */ -#define BUS_QUIET 0x04 /* Quite Scsi Bus Code */ -#define BUS_UNQUIET 0x05 /* Un Quiet Scsi Bus Code */ - - u_int32_t cp_datalen; /* - * Data Transfer Length. If scatter=1 len (IN - * BYTES!) of the S/G array - */ - - u_int32_t cp_busaddr; /* Unique identifier. Busaddr works well */ - u_int32_t cp_dataDMA; /* - * Data Address, if scatter=1 then it is the - * address of scatter packet - */ - u_int32_t cp_statDMA; /* address for Status Packet */ - u_int32_t cp_reqDMA; /* - * Request Sense Address, used if CP command - * ends with error - */ - u_int8_t CP_OpCode; - -} eata_ccb_t; - -/* - * DPT Signature Structure. - * Used by /dev/dpt to directly pass commands to the HBA - * We have more information here than we care for... - */ - -/* Current Signature Version - sigBYTE dsSigVersion; */ -#define SIG_VERSION 1 - -/* - * Processor Family - sigBYTE dsProcessorFamily; DISTINCT VALUE - * - * What type of processor the file is meant to run on. - * This will let us know whether to read sigWORDs as high/low or low/high. - */ -#define PROC_INTEL 0x00 /* Intel 80x86 */ -#define PROC_MOTOROLA 0x01 /* Motorola 68K */ -#define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */ -#define PROC_ALPHA 0x03 /* DEC Alpha */ - -/* - * Specific Minimim Processor - sigBYTE dsProcessor; FLAG BITS - * - * Different bit definitions dependent on processor_family - */ - -/* PROC_INTEL: */ -#define PROC_8086 0x01 /* Intel 8086 */ -#define PROC_286 0x02 /* Intel 80286 */ -#define PROC_386 0x04 /* Intel 80386 */ -#define PROC_486 0x08 /* Intel 80486 */ -#define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */ -#define PROC_P6 0x20 /* Intel 686 aka P6 */ - -/* PROC_MOTOROLA: */ -#define PROC_68000 0x01 /* Motorola 68000 */ -#define PROC_68020 0x02 /* Motorola 68020 */ -#define PROC_68030 0x04 /* Motorola 68030 */ -#define PROC_68040 0x08 /* Motorola 68040 */ - -/* Filetype - sigBYTE dsFiletype; DISTINCT VALUES */ -#define FT_EXECUTABLE 0 /* Executable Program */ -#define FT_SCRIPT 1 /* Script/Batch File??? */ -#define FT_HBADRVR 2 /* HBA Driver */ -#define FT_OTHERDRVR 3 /* Other Driver */ -#define FT_IFS 4 /* Installable Filesystem Driver */ -#define FT_ENGINE 5 /* DPT Engine */ -#define FT_COMPDRVR 6 /* Compressed Driver Disk */ -#define FT_LANGUAGE 7 /* Foreign Language file */ -#define FT_FIRMWARE 8 /* Downloadable or actual Firmware */ -#define FT_COMMMODL 9 /* Communications Module */ -#define FT_INT13 10 /* INT 13 style HBA Driver */ -#define FT_HELPFILE 11 /* Help file */ -#define FT_LOGGER 12 /* Event Logger */ -#define FT_INSTALL 13 /* An Install Program */ -#define FT_LIBRARY 14 /* Storage Manager Real-Mode Calls */ -#define FT_RESOURCE 15 /* Storage Manager Resource File */ -#define FT_MODEM_DB 16 /* Storage Manager Modem Database */ - -/* Filetype flags - sigBYTE dsFiletypeFlags; FLAG BITS */ -#define FTF_DLL 0x01 /* Dynamic Link Library */ -#define FTF_NLM 0x02 /* Netware Loadable Module */ -#define FTF_OVERLAYS 0x04 /* Uses overlays */ -#define FTF_DEBUG 0x08 /* Debug version */ -#define FTF_TSR 0x10 /* TSR */ -#define FTF_SYS 0x20 /* DOS Lodable driver */ -#define FTF_PROTECTED 0x40 /* Runs in protected mode */ -#define FTF_APP_SPEC 0x80 /* Application Specific */ - -/* OEM - sigBYTE dsOEM; DISTINCT VALUES */ -#define OEM_DPT 0 /* DPT */ -#define OEM_ATT 1 /* ATT */ -#define OEM_NEC 2 /* NEC */ -#define OEM_ALPHA 3 /* Alphatronix */ -#define OEM_AST 4 /* AST */ -#define OEM_OLIVETTI 5 /* Olivetti */ -#define OEM_SNI 6 /* Siemens/Nixdorf */ - -/* Operating System - sigLONG dsOS; FLAG BITS */ -#define OS_DOS 0x00000001 /* PC/MS-DOS */ -#define OS_WINDOWS 0x00000002 /* Microsoft Windows 3.x */ -#define OS_WINDOWS_NT 0x00000004 /* Microsoft Windows NT */ -#define OS_OS2M 0x00000008 /* OS/2 1.2.x,MS 1.3.0,IBM 1.3.x */ -#define OS_OS2L 0x00000010 /* Microsoft OS/2 1.301 - LADDR */ -#define OS_OS22x 0x00000020 /* IBM OS/2 2.x */ -#define OS_NW286 0x00000040 /* Novell NetWare 286 */ -#define OS_NW386 0x00000080 /* Novell NetWare 386 */ -#define OS_GEN_UNIX 0x00000100 /* Generic Unix */ -#define OS_SCO_UNIX 0x00000200 /* SCO Unix */ -#define OS_ATT_UNIX 0x00000400 /* ATT Unix */ -#define OS_UNIXWARE 0x00000800 /* UnixWare Unix */ -#define OS_INT_UNIX 0x00001000 /* Interactive Unix */ -#define OS_SOLARIS 0x00002000 /* SunSoft Solaris */ -#define OS_QN 0x00004000 /* QNX for Tom Moch */ -#define OS_NEXTSTEP 0x00008000 /* NeXTSTEP */ -#define OS_BANYAN 0x00010000 /* Banyan Vines */ -#define OS_OLIVETTI_UNIX 0x00020000 /* Olivetti Unix */ -#define OS_FREEBSD 0x00040000 /* FreeBSD 2.2 and later */ -#define OS_OTHER 0x80000000 /* Other */ - -/* Capabilities - sigWORD dsCapabilities; FLAG BITS */ -#define CAP_RAID0 0x0001 /* RAID-0 */ -#define CAP_RAID1 0x0002 /* RAID-1 */ -#define CAP_RAID3 0x0004 /* RAID-3 */ -#define CAP_RAID5 0x0008 /* RAID-5 */ -#define CAP_SPAN 0x0010 /* Spanning */ -#define CAP_PASS 0x0020 /* Provides passthrough */ -#define CAP_OVERLAP 0x0040 /* Passthrough supports overlapped commands */ -#define CAP_ASPI 0x0080 /* Supports ASPI Command Requests */ -#define CAP_ABOVE16MB 0x0100 /* ISA Driver supports greater than 16MB */ -#define CAP_EXTEND 0x8000 /* Extended info appears after description */ - -/* Devices Supported - sigWORD dsDeviceSupp; FLAG BITS */ -#define DEV_DASD 0x0001 /* DASD (hard drives) */ -#define DEV_TAPE 0x0002 /* Tape drives */ -#define DEV_PRINTER 0x0004 /* Printers */ -#define DEV_PROC 0x0008 /* Processors */ -#define DEV_WORM 0x0010 /* WORM drives */ -#define DEV_CDROM 0x0020 /* CD-ROM drives */ -#define DEV_SCANNER 0x0040 /* Scanners */ -#define DEV_OPTICAL 0x0080 /* Optical Drives */ -#define DEV_JUKEBOX 0x0100 /* Jukebox */ -#define DEV_COMM 0x0200 /* Communications Devices */ -#define DEV_OTHER 0x0400 /* Other Devices */ -#define DEV_ALL 0xFFFF /* All SCSI Devices */ - -/* Adapters Families Supported - sigWORD dsAdapterSupp; FLAG BITS */ -#define ADF_2001 0x0001 /* PM2001 */ -#define ADF_2012A 0x0002 /* PM2012A */ -#define ADF_PLUS_ISA 0x0004 /* PM2011,PM2021 */ -#define ADF_SC3_ISA 0x0010 /* PM2021 */ -#define ADF_SC3_PCI 0x0040 /* SmartCache III PCI */ -#define ADF_SC4_ISA 0x0080 /* SmartCache IV ISA */ -#define ADF_SC4_PCI 0x0200 /* SmartCache IV PCI */ -#define ADF_ALL_MASTER 0xFFFE /* All bus mastering */ -#define ADF_ALL_CACHE 0xFFFC /* All caching */ -#define ADF_ALL 0xFFFF /* ALL DPT adapters */ - -/* Application - sigWORD dsApplication; FLAG BITS */ -#define APP_DPTMGR 0x0001 /* DPT Storage Manager */ -#define APP_ENGINE 0x0002 /* DPT Engine */ -#define APP_SYTOS 0x0004 /* Sytron Sytos Plus */ -#define APP_CHEYENNE 0x0008 /* Cheyenne ARCServe + ARCSolo */ -#define APP_MSCDEX 0x0010 /* Microsoft CD-ROM extensions */ -#define APP_NOVABACK 0x0020 /* NovaStor Novaback */ -#define APP_AIM 0x0040 /* Archive Information Manager */ - -/* Requirements - sigBYTE dsRequirements; FLAG BITS */ -#define REQ_SMARTROM 0x01 /* Requires SmartROM to be present */ -#define REQ_DPTDDL 0x02 /* Requires DPTDDL.SYS to be loaded */ -#define REQ_HBA_DRIVER 0x04 /* Requires an HBA driver to be loaded */ -#define REQ_ASPI_TRAN 0x08 /* Requires an ASPI Transport Modules */ -#define REQ_ENGINE 0x10 /* Requires a DPT Engine to be loaded */ -#define REQ_COMM_ENG 0x20 /* Requires a DPT Communications Engine */ - -typedef struct dpt_sig { - char dsSignature[6]; /* ALWAYS "dPtSiG" */ - u_int8_t SigVersion; /* signature version (currently 1) */ - u_int8_t ProcessorFamily; /* what type of processor */ - u_int8_t Processor; /* precise processor */ - u_int8_t Filetype; /* type of file */ - u_int8_t FiletypeFlags; /* flags to specify load type, etc. */ - u_int8_t OEM; /* OEM file was created for */ - u_int32_t OS; /* which Operating systems */ - u_int16_t Capabilities; /* RAID levels, etc. */ - u_int16_t DeviceSupp; /* Types of SCSI devices supported */ - u_int16_t AdapterSupp; /* DPT adapter families supported */ - u_int16_t Application; /* applications file is for */ - u_int8_t Requirements; /* Other driver dependencies */ - u_int8_t Version; /* 1 */ - u_int8_t Revision; /* 'J' */ - u_int8_t SubRevision; /* '9', ' ' if N/A */ - u_int8_t Month; /* creation month */ - u_int8_t Day; /* creation day */ - u_int8_t Year; /* creation year since 1980 */ - char *Description; /* description (NULL terminated) */ -} dpt_sig_t; - -/* 32 bytes minimum - with no description. Put NULL at description[0] */ -/* 81 bytes maximum - with 49 character description plus NULL. */ - -/* This line added at Roycroft's request */ -/* Microsoft's NT compiler gets confused if you do a pack and don't */ -/* restore it. */ -typedef struct eata_pass_through { - u_int8_t eataID[4]; - u_int32_t command; - -#define EATAUSRCMD (('D'<<8)|65) /* EATA PassThrough Command */ -#define DPT_SIGNATURE (('D'<<8)|67) /* Get Signature Structure */ -#define DPT_NUMCTRLS (('D'<<8)|68) /* Get Number Of DPT Adapters */ -#define DPT_CTRLINFO (('D'<<8)|69) /* Get Adapter Info Structure */ -#define DPT_SYSINFO (('D'<<8)|72) /* Get System Info Structure */ -#define DPT_BLINKLED (('D'<<8)|75) /* Get The BlinkLED Status */ - - u_int8_t *command_buffer; - eata_ccb_t command_packet; - u_int32_t timeout; - u_int8_t host_status; - u_int8_t target_status; - u_int8_t retries; -} eata_pt_t; - -typedef enum { - DCCB_FREE = 0x00, - DCCB_ACTIVE = 0x01, - DCCB_RELEASE_SIMQ = 0x02 -} dccb_state; - -typedef struct dpt_ccb { - eata_ccb_t eata_ccb; - bus_dmamap_t dmamap; - struct callout timer; - dpt_sg_t *sg_list; - u_int32_t sg_busaddr; - dccb_state state; - union ccb *ccb; - struct scsi_sense_data sense_data; - u_int8_t tag; - u_int8_t retries; - u_int8_t status; /* status of this queueslot */ - u_int8_t *cmd; /* address of cmd */ - - u_int32_t transaction_id; - u_int32_t result; - caddr_t data; - SLIST_ENTRY(dpt_ccb) links; - -#ifdef DPT_MEASURE_PERFORMANCE - u_int32_t submitted_time; - struct timeval command_started; - struct timeval command_ended; -#endif -} dpt_ccb_t; - -/* - * This is provided for compatibility with UnixWare only. - * Some of the fields may be bogus. - * Others may have a totally different meaning. - */ -typedef struct dpt_scsi_ha { - u_int32_t ha_state; /* Operational state */ - u_int8_t ha_id[MAX_CHANNELS]; /* Host adapter SCSI ids */ - int32_t ha_base; /* Base I/O address */ - int ha_max_jobs; /* Max number of Active Jobs */ - int ha_cache:2; /* Cache parameters */ - int ha_cachesize:30; /* In meg, only if cache present*/ - int ha_nbus; /* Number Of Busses on HBA */ - int ha_ntargets; /* Number Of Targets Supported */ - int ha_nluns; /* Number Of LUNs Supported */ - int ha_tshift; /* Shift value for target */ - int ha_bshift; /* Shift value for bus */ - int ha_npend; /* # of jobs sent to HBA */ - int ha_active_jobs; /* Number Of Active Jobs */ - char ha_fw_version[4]; /* Firmware Revision Level */ - void *ha_ccb; /* Controller command blocks */ - void *ha_cblist; /* Command block free list */ - void *ha_dev; /* Logical unit queues */ - void *ha_StPkt_lock; /* Status Packet Lock */ - void *ha_ccb_lock; /* CCB Lock */ - void *ha_LuQWaiting; /* Lu Queue Waiting List */ - void *ha_QWait_lock; /* Device Que Waiting Lock */ - int ha_QWait_opri; /* Saved Priority Level */ -#ifdef DPT_TARGET_MODE - dpt_ccb_t *target_ccb[MAX_CHANNELS]; /* Command block waiting writebuf */ -#endif -} dpt_compat_ha_t; - -/* - * Describe the Inquiry Data returned on Page 0 from the Adapter. The - * Page C1 Inquiry Data is described in the DptConfig_t structure above. - */ -typedef struct { - u_int8_t deviceType; - u_int8_t rm_dtq; - u_int8_t otherData[6]; - u_int8_t vendor[8]; - u_int8_t modelNum[16]; - u_int8_t firmware[4]; - u_int8_t protocol[4]; -} dpt_inq_t; - -/* - * sp_EOC is not `safe', so I will check sp_Messages[0] instead! - */ -#define DptStat_BUSY(x) ((x)->sp_ID_Message) -#define DptStat_Reset_BUSY(x) \ - ((x)->msg[0] = 0xA5, (x)->EOC = 0, \ - (x)->ccb_busaddr = ~0) - -#ifdef DPT_MEASURE_PERFORMANCE -#define BIG_ENOUGH 0x8fffffff -typedef struct dpt_metrics { - u_int32_t command_count[256]; /* We assume MAX 256 SCSI commands */ - u_int32_t max_command_time[256]; - u_int32_t min_command_time[256]; - - u_int32_t min_intr_time; - u_int32_t max_intr_time; - u_int32_t aborted_interrupts; - u_int32_t spurious_interrupts; - - u_int32_t max_waiting_count; - u_int32_t max_submit_count; - u_int32_t max_complete_count; - - u_int32_t min_waiting_time; - u_int32_t min_submit_time; - u_int32_t min_complete_time; - - u_int32_t max_waiting_time; - u_int32_t max_submit_time; - u_int32_t max_complete_time; - - u_int32_t command_collisions; - u_int32_t command_too_busy; - u_int32_t max_eata_tries; - u_int32_t min_eata_tries; - - u_int32_t read_by_size_count[10]; - u_int32_t write_by_size_count[10]; - u_int32_t read_by_size_min_time[10]; - u_int32_t read_by_size_max_time[10]; - u_int32_t write_by_size_min_time[10]; - u_int32_t write_by_size_max_time[10]; - -#define SIZE_512 0 -#define SIZE_1K 1 -#define SIZE_2K 2 -#define SIZE_4K 3 -#define SIZE_8K 4 -#define SIZE_16K 5 -#define SIZE_32K 6 -#define SIZE_64K 7 -#define SIZE_BIGGER 8 -#define SIZE_OTHER 9 - - struct timeval intr_started; - - u_int32_t warm_starts; - u_int32_t cold_boots; -} dpt_perf_t; -#endif - -struct sg_map_node { - bus_dmamap_t sg_dmamap; - bus_addr_t sg_physaddr; - dpt_sg_t* sg_vaddr; - SLIST_ENTRY(sg_map_node) links; -}; - -/* Main state machine and interface structure */ -typedef struct dpt_softc { - device_t dev; - struct mtx lock; - - struct resource * io_res; - int io_rid; - int io_type; - int io_offset; - - struct resource * irq_res; - int irq_rid; - void * ih; - - struct resource * drq_res; - int drq_rid; - - bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */ - dpt_ccb_t *dpt_dccbs; /* Array of dpt ccbs */ - bus_addr_t dpt_ccb_busbase; /* phys base address of array */ - bus_addr_t dpt_ccb_busend; /* phys end address of array */ - - u_int32_t handle_interrupts :1, /* Are we ready for real work? */ - target_mode_enabled :1, - resource_shortage :1, - cache_type :2, - spare :28; - - int total_dccbs; - int free_dccbs; - int pending_ccbs; - int completed_ccbs; - - SLIST_HEAD(, dpt_ccb) free_dccb_list; - LIST_HEAD(, ccb_hdr) pending_ccb_list; - - bus_dma_tag_t parent_dmat; - bus_dma_tag_t dccb_dmat; /* dmat for our ccb array */ - bus_dmamap_t dccb_dmamap; - bus_dma_tag_t sg_dmat; /* dmat for our sg maps */ - SLIST_HEAD(, sg_map_node) sg_maps; - - struct cam_sim *sims[MAX_CHANNELS]; - struct cam_path *paths[MAX_CHANNELS]; - u_int32_t commands_processed; - u_int32_t lost_interrupts; - - /* - * These three parameters can be used to allow for wide scsi, and - * for host adapters that support multiple busses. The first two - * should be set to 1 more than the actual max id or lun (i.e. 8 for - * normal systems). - * - * There is a FAT assumption here; We assume that these will never - * exceed MAX_CHANNELS, MAX_TARGETS, MAX_LUNS - */ - u_int channels; /* # of avail scsi chan. */ - u_int32_t max_id; - u_int32_t max_lun; - - u_int8_t irq; - u_int8_t dma_channel; - - TAILQ_ENTRY(dpt_softc) links; - int init_level; - - /* - * Every object on a unit can have a receiver, if it treats - * us as a target. We do that so that separate and independent - * clients can consume received buffers. - */ - -#define DPT_RW_BUFFER_SIZE (8 * 1024) - dpt_ccb_t *target_ccb[MAX_CHANNELS][MAX_TARGETS][MAX_LUNS]; - u_int8_t *rw_buffer[MAX_CHANNELS][MAX_TARGETS][MAX_LUNS]; - dpt_rec_buff buffer_receiver[MAX_CHANNELS][MAX_TARGETS][MAX_LUNS]; - - dpt_inq_t board_data; - u_int8_t EATA_revision; - u_int8_t bustype; /* bustype of HBA */ - u_int32_t state; /* state of HBA */ - -#define DPT_HA_FREE 0x00000000 -#define DPT_HA_OK 0x00000000 -#define DPT_HA_NO_TIMEOUT 0x00000000 -#define DPT_HA_BUSY 0x00000001 -#define DPT_HA_TIMEOUT 0x00000002 -#define DPT_HA_RESET 0x00000004 -#define DPT_HA_LOCKED 0x00000008 -#define DPT_HA_ABORTED 0x00000010 -#define DPT_HA_CONTROL_ACTIVE 0x00000020 -#define DPT_HA_SHUTDOWN_ACTIVE 0x00000040 -#define DPT_HA_COMMAND_ACTIVE 0x00000080 -#define DPT_HA_QUIET 0x00000100 - - u_int8_t primary; /* true if primary */ - - u_int8_t more_support :1, /* HBA supports MORE flag */ - immediate_support :1, /* HBA supports IMMEDIATE */ - spare2 :6; - - u_int8_t resetlevel[MAX_CHANNELS]; - u_int32_t last_ccb; /* Last used ccb */ - u_int32_t cplen; /* size of CP in words */ - u_int16_t cppadlen; /* pad length of cp */ - u_int16_t max_dccbs; - u_int16_t sgsize; /* Entries in the SG list */ - u_int8_t hostid[MAX_CHANNELS]; /* SCSI ID of HBA */ - u_int32_t cache_size; - - volatile dpt_sp_t *sp; /* status packet */ - /* Copied from the status packet during interrupt handler */ - u_int8_t hba_stat; - u_int8_t scsi_stat; /* Target SCSI status */ - u_int32_t residue_len; /* Number of bytes not transferred */ - bus_addr_t sp_physaddr; /* phys address of status packet */ - - /* - * We put ALL conditional elements at the tail for the structure. - * If we do not, then userland code will crash or trash based on which - * kernel it is running with. - * This isi most visible with usr/sbin/dpt_softc(8) - */ - -#ifdef DPT_MEASURE_PERFORMANCE - dpt_perf_t performance; -#endif - -#ifdef DPT_RESET_HBA - struct timeval last_contact; -#endif -} dpt_softc_t; - -/* - * This structure is used to pass dpt_softc contents to userland via the - * ioctl DPT_IOCTL_SOFTC. The reason for this maddness, is that FreeBSD - * (all BSDs ?) chose to actually assign a nasty meaning to the IOCTL word, - * encoding 13 bits of it as size. As dpt_softc_t is somewhere between - * 8,594 and 8,600 (depends on options), we have to copy the data to - * something less than 4KB long. This siliness also solves the problem of - * varying definition of dpt_softc_t, As the variants are exluded from - * dpt_user_softc. - * - * See dpt_softc_t above for enumerations, comments and such. - */ -typedef struct dpt_user_softc { - int unit; - u_int32_t handle_interrupts :1, /* Are we ready for real work? */ - target_mode_enabled :1, - spare :30; - - int total_ccbs_count; - int free_ccbs_count; - int waiting_ccbs_count; - int submitted_ccbs_count; - int completed_ccbs_count; - - u_int32_t queue_status; - u_int32_t free_lock; - u_int32_t waiting_lock; - u_int32_t submitted_lock; - u_int32_t completed_lock; - - u_int32_t commands_processed; - u_int32_t lost_interrupts; - - u_int8_t channels; - u_int32_t max_id; - u_int32_t max_lun; - - u_int16_t io_base; - u_int8_t *v_membase; - u_int8_t *p_membase; - - u_int8_t irq; - u_int8_t dma_channel; - - dpt_inq_t board_data; - u_int8_t EATA_revision; - u_int8_t bustype; - u_int32_t state; - - u_int8_t primary; - u_int8_t more_support :1, - immediate_support :1, - spare2 :6; - - u_int8_t resetlevel[MAX_CHANNELS]; - u_int32_t last_ccb; - u_int32_t cplen; - u_int16_t cppadlen; - u_int16_t queuesize; - u_int16_t sgsize; - u_int8_t hostid[MAX_CHANNELS]; - u_int32_t cache_type :2, - cache_size :30; -} dpt_user_softc_t; - -/* - * Externals: - * These all come from dpt_scsi.c - * - */ -#ifdef _KERNEL -/* This function gets the current hi-res time and returns it to the caller */ -static __inline struct timeval -dpt_time_now(void) -{ - struct timeval now; - - microtime(&now); - return(now); -} - -/* - * Given a minor device number, get its SCSI Unit. - */ -static __inline int -dpt_minor2unit(int minor) -{ - return(minor2hba(minor)); -} - -dpt_softc_t *dpt_minor2softc(int minor_no); - -#endif /* _KERNEL */ - -/* - * This function subtracts one timval structure from another, - * Returning the result in usec. - * It assumes that less than 4 billion usecs passed form start to end. - * If times are sensless, ~0 is returned. - */ -static __inline u_int32_t -dpt_time_delta(struct timeval start, - struct timeval end) -{ - if (start.tv_sec > end.tv_sec) - return(~0); - - if ( (start.tv_sec == end.tv_sec) && (start.tv_usec > end.tv_usec) ) - return(~0); - - return ( (end.tv_sec - start.tv_sec) * 1000000 + - (end.tv_usec - start.tv_usec) ); -} - -extern devclass_t dpt_devclass; - -#ifdef _KERNEL -void dpt_alloc(device_t); -int dpt_detach(device_t); -int dpt_alloc_resources(device_t); -void dpt_release_resources(device_t); -#endif -void dpt_free(struct dpt_softc *dpt); -int dpt_init(struct dpt_softc *dpt); -int dpt_attach(dpt_softc_t * dpt); -void dpt_intr(void *arg); - -#if 0 -extern void hex_dump(u_char * data, int length, - char *name, int no); -extern char *i2bin(unsigned int no, int length); -extern char *scsi_cmd_name(u_int8_t cmd); - -extern dpt_conf_t *dpt_get_conf(dpt_softc_t *dpt, u_int8_t page, - u_int8_t target, u_int8_t size, - int extent); - -extern int dpt_setup(dpt_softc_t * dpt, dpt_conf_t * conf); -extern int dpt_attach(dpt_softc_t * dpt); -extern void dpt_shutdown(int howto, dpt_softc_t *dpt); -extern void dpt_detect_cache(dpt_softc_t *dpt); - -extern int dpt_user_cmd(dpt_softc_t *dpt, eata_pt_t *user_cmd, - caddr_t cmdarg, int minor_no); - -extern u_int8_t dpt_blinking_led(dpt_softc_t *dpt); - -extern dpt_rb_t dpt_register_buffer(int unit, u_int8_t channel, u_int8_t target, - u_int8_t lun, u_int8_t mode, - u_int16_t length, u_int16_t offset, - dpt_rec_buff callback, dpt_rb_op_t op); - -extern int dpt_send_buffer(int unit, u_int8_t channel, u_int8_t target, - u_int8_t lun, u_int8_t mode, u_int16_t length, - u_int16_t offset, void *data, - buff_wr_done callback); - - - -void dpt_reset_performance(dpt_softc_t *dpt); -#endif - -#endif /* _DPT_H */ Property changes on: head/sys/dev/dpt/dpt.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/dev/dpt/dpt_scsi.c =================================================================== --- head/sys/dev/dpt/dpt_scsi.c (revision 339568) +++ head/sys/dev/dpt/dpt_scsi.c (nonexistent) @@ -1,2411 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1997 by Simon Shapiro - * All Rights Reserved - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification, immediately at the beginning of the file. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -__FBSDID("$FreeBSD$"); - -/* - * dpt_scsi.c: SCSI dependent code for the DPT driver - * - * credits: Assisted by Mike Neuffer in the early low level DPT code - * Thanx to Mark Salyzyn of DPT for his assistance. - * Special thanx to Justin Gibbs for invaluable help in - * making this driver look and work like a FreeBSD component. - * Last but not least, many thanx to UCB and the FreeBSD - * team for creating and maintaining such a wonderful O/S. - * - * TODO: * Add ISA probe code. - * * Add driver-level RAID-0. This will allow interoperability with - * NiceTry, M$-Doze, Win-Dog, Slowlaris, etc., in recognizing RAID - * arrays that span controllers (Wow!). - */ - -#define _DPT_C_ - -#include "opt_dpt.h" - -#include -#include -#include -#include -#include -#include - -#include - -#include - -#include -#include - - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -/* dpt_isa.c, and dpt_pci.c need this in a central place */ -devclass_t dpt_devclass; - -#define microtime_now dpt_time_now() - -#define dpt_inl(dpt, port) \ - bus_read_4((dpt)->io_res, (dpt)->io_offset + port) -#define dpt_inb(dpt, port) \ - bus_read_1((dpt)->io_res, (dpt)->io_offset + port) -#define dpt_outl(dpt, port, value) \ - bus_write_4((dpt)->io_res, (dpt)->io_offset + port, value) -#define dpt_outb(dpt, port, value) \ - bus_write_1((dpt)->io_res, (dpt)->io_offset + port, value) - -/* - * These will have to be setup by parameters passed at boot/load time. For - * performance reasons, we make them constants for the time being. - */ -#define dpt_min_segs DPT_MAX_SEGS -#define dpt_max_segs DPT_MAX_SEGS - -/* Definitions for our use of the SIM private CCB area */ -#define ccb_dccb_ptr spriv_ptr0 -#define ccb_dpt_ptr spriv_ptr1 - -/* ================= Private Inline Function declarations ===================*/ -static __inline int dpt_just_reset(dpt_softc_t * dpt); -static __inline int dpt_raid_busy(dpt_softc_t * dpt); -static __inline int dpt_wait(dpt_softc_t *dpt, u_int bits, - u_int state); -static __inline struct dpt_ccb* dptgetccb(struct dpt_softc *dpt); -static __inline void dptfreeccb(struct dpt_softc *dpt, - struct dpt_ccb *dccb); -static __inline bus_addr_t dptccbvtop(struct dpt_softc *dpt, - struct dpt_ccb *dccb); - -static __inline int dpt_send_immediate(dpt_softc_t *dpt, - eata_ccb_t *cmd_block, - u_int32_t cmd_busaddr, - u_int retries, - u_int ifc, u_int code, - u_int code2); - -/* ==================== Private Function declarations =======================*/ -static void dptmapmem(void *arg, bus_dma_segment_t *segs, - int nseg, int error); - -static struct sg_map_node* - dptallocsgmap(struct dpt_softc *dpt); - -static int dptallocccbs(dpt_softc_t *dpt); - -static int dpt_get_conf(dpt_softc_t *dpt, dpt_ccb_t *dccb, - u_int32_t dccb_busaddr, u_int size, - u_int page, u_int target, int extent); -static void dpt_detect_cache(dpt_softc_t *dpt, dpt_ccb_t *dccb, - u_int32_t dccb_busaddr, - u_int8_t *buff); - -static void dpt_poll(struct cam_sim *sim); -static void dpt_intr_locked(dpt_softc_t *dpt); - -static void dptexecuteccb(void *arg, bus_dma_segment_t *dm_segs, - int nseg, int error); - -static void dpt_action(struct cam_sim *sim, union ccb *ccb); - -static int dpt_send_eata_command(dpt_softc_t *dpt, eata_ccb_t *cmd, - u_int32_t cmd_busaddr, - u_int command, u_int retries, - u_int ifc, u_int code, - u_int code2); -static void dptprocesserror(dpt_softc_t *dpt, dpt_ccb_t *dccb, - union ccb *ccb, u_int hba_stat, - u_int scsi_stat, u_int32_t resid); - -static void dpttimeout(void *arg); -static void dptshutdown(void *arg, int howto); - -/* ================= Private Inline Function definitions ====================*/ -static __inline int -dpt_just_reset(dpt_softc_t * dpt) -{ - if ((dpt_inb(dpt, 2) == 'D') - && (dpt_inb(dpt, 3) == 'P') - && (dpt_inb(dpt, 4) == 'T') - && (dpt_inb(dpt, 5) == 'H')) - return (1); - else - return (0); -} - -static __inline int -dpt_raid_busy(dpt_softc_t * dpt) -{ - if ((dpt_inb(dpt, 0) == 'D') - && (dpt_inb(dpt, 1) == 'P') - && (dpt_inb(dpt, 2) == 'T')) - return (1); - else - return (0); -} - -static __inline int -dpt_wait(dpt_softc_t *dpt, u_int bits, u_int state) -{ - int i; - u_int c; - - for (i = 0; i < 20000; i++) { /* wait 20ms for not busy */ - c = dpt_inb(dpt, HA_RSTATUS) & bits; - if (c == state) - return (0); - else - DELAY(50); - } - return (-1); -} - -static __inline struct dpt_ccb* -dptgetccb(struct dpt_softc *dpt) -{ - struct dpt_ccb* dccb; - - if (!dumping) - mtx_assert(&dpt->lock, MA_OWNED); - if ((dccb = SLIST_FIRST(&dpt->free_dccb_list)) != NULL) { - SLIST_REMOVE_HEAD(&dpt->free_dccb_list, links); - dpt->free_dccbs--; - } else if (dpt->total_dccbs < dpt->max_dccbs) { - dptallocccbs(dpt); - dccb = SLIST_FIRST(&dpt->free_dccb_list); - if (dccb == NULL) - device_printf(dpt->dev, "Can't malloc DCCB\n"); - else { - SLIST_REMOVE_HEAD(&dpt->free_dccb_list, links); - dpt->free_dccbs--; - } - } - - return (dccb); -} - -static __inline void -dptfreeccb(struct dpt_softc *dpt, struct dpt_ccb *dccb) -{ - - if (!dumping) - mtx_assert(&dpt->lock, MA_OWNED); - if ((dccb->state & DCCB_ACTIVE) != 0) - LIST_REMOVE(&dccb->ccb->ccb_h, sim_links.le); - if ((dccb->state & DCCB_RELEASE_SIMQ) != 0) - dccb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ; - else if (dpt->resource_shortage != 0 - && (dccb->ccb->ccb_h.status & CAM_RELEASE_SIMQ) == 0) { - dccb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ; - dpt->resource_shortage = FALSE; - } - dccb->state = DCCB_FREE; - SLIST_INSERT_HEAD(&dpt->free_dccb_list, dccb, links); - ++dpt->free_dccbs; -} - -static __inline bus_addr_t -dptccbvtop(struct dpt_softc *dpt, struct dpt_ccb *dccb) -{ - return (dpt->dpt_ccb_busbase - + (u_int32_t)((caddr_t)dccb - (caddr_t)dpt->dpt_dccbs)); -} - -static __inline struct dpt_ccb * -dptccbptov(struct dpt_softc *dpt, bus_addr_t busaddr) -{ - return (dpt->dpt_dccbs - + ((struct dpt_ccb *)busaddr - - (struct dpt_ccb *)dpt->dpt_ccb_busbase)); -} - -/* - * Send a command for immediate execution by the DPT - * See above function for IMPORTANT notes. - */ -static __inline int -dpt_send_immediate(dpt_softc_t *dpt, eata_ccb_t *cmd_block, - u_int32_t cmd_busaddr, u_int retries, - u_int ifc, u_int code, u_int code2) -{ - return (dpt_send_eata_command(dpt, cmd_block, cmd_busaddr, - EATA_CMD_IMMEDIATE, retries, ifc, - code, code2)); -} - - -/* ===================== Private Function definitions =======================*/ -static void -dptmapmem(void *arg, bus_dma_segment_t *segs, int nseg, int error) -{ - bus_addr_t *busaddrp; - - busaddrp = (bus_addr_t *)arg; - *busaddrp = segs->ds_addr; -} - -static struct sg_map_node * -dptallocsgmap(struct dpt_softc *dpt) -{ - struct sg_map_node *sg_map; - - sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT); - - if (sg_map == NULL) - return (NULL); - - /* Allocate S/G space for the next batch of CCBS */ - if (bus_dmamem_alloc(dpt->sg_dmat, (void **)&sg_map->sg_vaddr, - BUS_DMA_NOWAIT, &sg_map->sg_dmamap) != 0) { - free(sg_map, M_DEVBUF); - return (NULL); - } - - (void)bus_dmamap_load(dpt->sg_dmat, sg_map->sg_dmamap, sg_map->sg_vaddr, - PAGE_SIZE, dptmapmem, &sg_map->sg_physaddr, - /*flags*/0); - - SLIST_INSERT_HEAD(&dpt->sg_maps, sg_map, links); - - return (sg_map); -} - -/* - * Allocate another chunk of CCB's. Return count of entries added. - */ -static int -dptallocccbs(dpt_softc_t *dpt) -{ - struct dpt_ccb *next_ccb; - struct sg_map_node *sg_map; - bus_addr_t physaddr; - dpt_sg_t *segs; - int newcount; - int i; - - if (!dumping) - mtx_assert(&dpt->lock, MA_OWNED); - next_ccb = &dpt->dpt_dccbs[dpt->total_dccbs]; - - if (next_ccb == dpt->dpt_dccbs) { - /* - * First time through. Re-use the S/G - * space we allocated for initialization - * CCBS. - */ - sg_map = SLIST_FIRST(&dpt->sg_maps); - } else { - sg_map = dptallocsgmap(dpt); - } - - if (sg_map == NULL) - return (0); - - segs = sg_map->sg_vaddr; - physaddr = sg_map->sg_physaddr; - - newcount = (PAGE_SIZE / (dpt->sgsize * sizeof(dpt_sg_t))); - for (i = 0; dpt->total_dccbs < dpt->max_dccbs && i < newcount; i++) { - int error; - - error = bus_dmamap_create(dpt->buffer_dmat, /*flags*/0, - &next_ccb->dmamap); - if (error != 0) - break; - callout_init_mtx(&next_ccb->timer, &dpt->lock, 0); - next_ccb->sg_list = segs; - next_ccb->sg_busaddr = htonl(physaddr); - next_ccb->eata_ccb.cp_dataDMA = htonl(physaddr); - next_ccb->eata_ccb.cp_statDMA = htonl(dpt->sp_physaddr); - next_ccb->eata_ccb.cp_reqDMA = - htonl(dptccbvtop(dpt, next_ccb) - + offsetof(struct dpt_ccb, sense_data)); - next_ccb->eata_ccb.cp_busaddr = dpt->dpt_ccb_busend; - next_ccb->state = DCCB_FREE; - next_ccb->tag = dpt->total_dccbs; - SLIST_INSERT_HEAD(&dpt->free_dccb_list, next_ccb, links); - segs += dpt->sgsize; - physaddr += (dpt->sgsize * sizeof(dpt_sg_t)); - dpt->dpt_ccb_busend += sizeof(*next_ccb); - next_ccb++; - dpt->total_dccbs++; - } - return (i); -} - -/* - * Read a configuration page into the supplied dpt_cont_t buffer. - */ -static int -dpt_get_conf(dpt_softc_t *dpt, dpt_ccb_t *dccb, u_int32_t dccb_busaddr, - u_int size, u_int page, u_int target, int extent) -{ - eata_ccb_t *cp; - - u_int8_t status; - - int ndx; - int result; - - mtx_assert(&dpt->lock, MA_OWNED); - cp = &dccb->eata_ccb; - bzero((void *)(uintptr_t)(volatile void *)dpt->sp, sizeof(*dpt->sp)); - - cp->Interpret = 1; - cp->DataIn = 1; - cp->Auto_Req_Sen = 1; - cp->reqlen = sizeof(struct scsi_sense_data); - - cp->cp_id = target; - cp->cp_LUN = 0; /* In the EATA packet */ - cp->cp_lun = 0; /* In the SCSI command */ - - cp->cp_scsi_cmd = INQUIRY; - cp->cp_len = size; - - cp->cp_extent = extent; - - cp->cp_page = page; - cp->cp_channel = 0; /* DNC, Interpret mode is set */ - cp->cp_identify = 1; - cp->cp_datalen = htonl(size); - - /* - * This could be a simple for loop, but we suspected the compiler To - * have optimized it a bit too much. Wait for the controller to - * become ready - */ - while (((status = dpt_inb(dpt, HA_RSTATUS)) != (HA_SREADY | HA_SSC) - && (status != (HA_SREADY | HA_SSC | HA_SERROR)) - && (status != (HA_SDRDY | HA_SERROR | HA_SDRQ))) - || (dpt_wait(dpt, HA_SBUSY, 0))) { - - /* - * RAID Drives still Spinning up? (This should only occur if - * the DPT controller is in a NON PC (PCI?) platform). - */ - if (dpt_raid_busy(dpt)) { - device_printf(dpt->dev, - "WARNING: Get_conf() RSUS failed.\n"); - return (0); - } - } - - DptStat_Reset_BUSY(dpt->sp); - - /* - * XXXX We might want to do something more clever than aborting at - * this point, like resetting (rebooting) the controller and trying - * again. - */ - if ((result = dpt_send_eata_command(dpt, cp, dccb_busaddr, - EATA_CMD_DMA_SEND_CP, - 10000, 0, 0, 0)) != 0) { - device_printf(dpt->dev, - "WARNING: Get_conf() failed (%d) to send " - "EATA_CMD_DMA_READ_CONFIG\n", - result); - return (0); - } - /* Wait for two seconds for a response. This can be slow */ - for (ndx = 0; - (ndx < 20000) - && !((status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ); - ndx++) { - DELAY(50); - } - - /* Grab the status and clear interrupts */ - status = dpt_inb(dpt, HA_RSTATUS); - - /* - * Check the status carefully. Return only if the - * command was successful. - */ - if (((status & HA_SERROR) == 0) - && (dpt->sp->hba_stat == 0) - && (dpt->sp->scsi_stat == 0) - && (dpt->sp->residue_len == 0)) - return (0); - - if (dpt->sp->scsi_stat == SCSI_STATUS_CHECK_COND) - return (0); - - return (1); -} - -/* Detect Cache parameters and size */ -static void -dpt_detect_cache(dpt_softc_t *dpt, dpt_ccb_t *dccb, u_int32_t dccb_busaddr, - u_int8_t *buff) -{ - eata_ccb_t *cp; - u_int8_t *param; - int bytes; - int result; - int ndx; - u_int8_t status; - - mtx_assert(&dpt->lock, MA_OWNED); - - /* - * Default setting, for best performance.. - * This is what virtually all cards default to.. - */ - dpt->cache_type = DPT_CACHE_WRITEBACK; - dpt->cache_size = 0; - - cp = &dccb->eata_ccb; - bzero((void *)(uintptr_t)(volatile void *)dpt->sp, sizeof(dpt->sp)); - bzero(buff, 512); - - /* Setup the command structure */ - cp->Interpret = 1; - cp->DataIn = 1; - cp->Auto_Req_Sen = 1; - cp->reqlen = sizeof(struct scsi_sense_data); - - cp->cp_id = 0; /* who cares? The HBA will interpret.. */ - cp->cp_LUN = 0; /* In the EATA packet */ - cp->cp_lun = 0; /* In the SCSI command */ - cp->cp_channel = 0; - - cp->cp_scsi_cmd = EATA_CMD_DMA_SEND_CP; - cp->cp_len = 56; - - cp->cp_extent = 0; - cp->cp_page = 0; - cp->cp_identify = 1; - cp->cp_dispri = 1; - - /* - * Build the EATA Command Packet structure - * for a Log Sense Command. - */ - cp->cp_cdb[0] = 0x4d; - cp->cp_cdb[1] = 0x0; - cp->cp_cdb[2] = 0x40 | 0x33; - cp->cp_cdb[7] = 1; - - cp->cp_datalen = htonl(512); - - result = dpt_send_eata_command(dpt, cp, dccb_busaddr, - EATA_CMD_DMA_SEND_CP, - 10000, 0, 0, 0); - if (result != 0) { - device_printf(dpt->dev, - "WARNING: detect_cache() failed (%d) to send " - "EATA_CMD_DMA_SEND_CP\n", result); - return; - } - /* Wait for two seconds for a response. This can be slow... */ - for (ndx = 0; - (ndx < 20000) && - !((status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ); - ndx++) { - DELAY(50); - } - - /* Grab the status and clear interrupts */ - status = dpt_inb(dpt, HA_RSTATUS); - - /* - * Sanity check - */ - if (buff[0] != 0x33) { - return; - } - bytes = DPT_HCP_LENGTH(buff); - param = DPT_HCP_FIRST(buff); - - if (DPT_HCP_CODE(param) != 1) { - /* - * DPT Log Page layout error - */ - device_printf(dpt->dev, "NOTICE: Log Page (1) layout error\n"); - return; - } - if (!(param[4] & 0x4)) { - dpt->cache_type = DPT_NO_CACHE; - return; - } - while (DPT_HCP_CODE(param) != 6) { - param = DPT_HCP_NEXT(param); - if ((param < buff) - || (param >= &buff[bytes])) { - return; - } - } - - if (param[4] & 0x2) { - /* - * Cache disabled - */ - dpt->cache_type = DPT_NO_CACHE; - return; - } - - if (param[4] & 0x4) { - dpt->cache_type = DPT_CACHE_WRITETHROUGH; - } - - /* XXX This isn't correct. This log parameter only has two bytes.... */ -#if 0 - dpt->cache_size = param[5] - | (param[6] << 8) - | (param[7] << 16) - | (param[8] << 24); -#endif -} - -static void -dpt_poll(struct cam_sim *sim) -{ - dpt_intr_locked(cam_sim_softc(sim)); -} - -static void -dptexecuteccb(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error) -{ - struct dpt_ccb *dccb; - union ccb *ccb; - struct dpt_softc *dpt; - - dccb = (struct dpt_ccb *)arg; - ccb = dccb->ccb; - dpt = (struct dpt_softc *)ccb->ccb_h.ccb_dpt_ptr; - if (!dumping) - mtx_assert(&dpt->lock, MA_OWNED); - - if (error != 0) { - if (error != EFBIG) - device_printf(dpt->dev, - "Unexepected error 0x%x returned from " - "bus_dmamap_load\n", error); - if (ccb->ccb_h.status == CAM_REQ_INPROG) { - xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); - ccb->ccb_h.status = CAM_REQ_TOO_BIG|CAM_DEV_QFRZN; - } - dptfreeccb(dpt, dccb); - xpt_done(ccb); - return; - } - - if (nseg != 0) { - dpt_sg_t *sg; - bus_dma_segment_t *end_seg; - bus_dmasync_op_t op; - - end_seg = dm_segs + nseg; - - /* Copy the segments into our SG list */ - sg = dccb->sg_list; - while (dm_segs < end_seg) { - sg->seg_len = htonl(dm_segs->ds_len); - sg->seg_addr = htonl(dm_segs->ds_addr); - sg++; - dm_segs++; - } - - if (nseg > 1) { - dccb->eata_ccb.scatter = 1; - dccb->eata_ccb.cp_dataDMA = dccb->sg_busaddr; - dccb->eata_ccb.cp_datalen = - htonl(nseg * sizeof(dpt_sg_t)); - } else { - dccb->eata_ccb.cp_dataDMA = dccb->sg_list[0].seg_addr; - dccb->eata_ccb.cp_datalen = dccb->sg_list[0].seg_len; - } - - if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) - op = BUS_DMASYNC_PREREAD; - else - op = BUS_DMASYNC_PREWRITE; - - bus_dmamap_sync(dpt->buffer_dmat, dccb->dmamap, op); - - } else { - dccb->eata_ccb.cp_dataDMA = 0; - dccb->eata_ccb.cp_datalen = 0; - } - - /* - * Last time we need to check if this CCB needs to - * be aborted. - */ - if (ccb->ccb_h.status != CAM_REQ_INPROG) { - if (nseg != 0) - bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap); - dptfreeccb(dpt, dccb); - xpt_done(ccb); - return; - } - - dccb->state |= DCCB_ACTIVE; - ccb->ccb_h.status |= CAM_SIM_QUEUED; - LIST_INSERT_HEAD(&dpt->pending_ccb_list, &ccb->ccb_h, sim_links.le); - callout_reset_sbt(&dccb->timer, SBT_1MS * ccb->ccb_h.timeout, 0, - dpttimeout, dccb, 0); - if (dpt_send_eata_command(dpt, &dccb->eata_ccb, - dccb->eata_ccb.cp_busaddr, - EATA_CMD_DMA_SEND_CP, 0, 0, 0, 0) != 0) { - ccb->ccb_h.status = CAM_NO_HBA; /* HBA dead or just busy?? */ - if (nseg != 0) - bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap); - dptfreeccb(dpt, dccb); - xpt_done(ccb); - } -} - -static void -dpt_action(struct cam_sim *sim, union ccb *ccb) -{ - struct dpt_softc *dpt; - - CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("dpt_action\n")); - - dpt = (struct dpt_softc *)cam_sim_softc(sim); - mtx_assert(&dpt->lock, MA_OWNED); - - if ((dpt->state & DPT_HA_SHUTDOWN_ACTIVE) != 0) { - xpt_print_path(ccb->ccb_h.path); - printf("controller is shutdown. Aborting CCB.\n"); - ccb->ccb_h.status = CAM_NO_HBA; - xpt_done(ccb); - return; - } - - switch (ccb->ccb_h.func_code) { - /* Common cases first */ - case XPT_SCSI_IO: /* Execute the requested I/O operation */ - { - struct ccb_scsiio *csio; - struct ccb_hdr *ccbh; - struct dpt_ccb *dccb; - struct eata_ccb *eccb; - - csio = &ccb->csio; - ccbh = &ccb->ccb_h; - /* Max CDB length is 12 bytes */ - if (csio->cdb_len > 12) { - ccb->ccb_h.status = CAM_REQ_INVALID; - xpt_done(ccb); - return; - } - if ((dccb = dptgetccb(dpt)) == NULL) { - dpt->resource_shortage = 1; - xpt_freeze_simq(sim, /*count*/1); - ccb->ccb_h.status = CAM_REQUEUE_REQ; - xpt_done(ccb); - return; - } - eccb = &dccb->eata_ccb; - - /* Link dccb and ccb so we can find one from the other */ - dccb->ccb = ccb; - ccb->ccb_h.ccb_dccb_ptr = dccb; - ccb->ccb_h.ccb_dpt_ptr = dpt; - - /* - * Explicitly set all flags so that the compiler can - * be smart about setting them. - */ - eccb->SCSI_Reset = 0; - eccb->HBA_Init = 0; - eccb->Auto_Req_Sen = (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) - ? 0 : 1; - eccb->scatter = 0; - eccb->Quick = 0; - eccb->Interpret = - ccb->ccb_h.target_id == dpt->hostid[cam_sim_bus(sim)] - ? 1 : 0; - eccb->DataOut = (ccb->ccb_h.flags & CAM_DIR_OUT) ? 1 : 0; - eccb->DataIn = (ccb->ccb_h.flags & CAM_DIR_IN) ? 1 : 0; - eccb->reqlen = csio->sense_len; - eccb->cp_id = ccb->ccb_h.target_id; - eccb->cp_channel = cam_sim_bus(sim); - eccb->cp_LUN = ccb->ccb_h.target_lun; - eccb->cp_luntar = 0; - eccb->cp_dispri = (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) - ? 0 : 1; - eccb->cp_identify = 1; - - if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0 - && csio->tag_action != CAM_TAG_ACTION_NONE) { - eccb->cp_msg[0] = csio->tag_action; - eccb->cp_msg[1] = dccb->tag; - } else { - eccb->cp_msg[0] = 0; - eccb->cp_msg[1] = 0; - } - eccb->cp_msg[2] = 0; - - if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) { - if ((ccb->ccb_h.flags & CAM_CDB_PHYS) == 0) { - bcopy(csio->cdb_io.cdb_ptr, - eccb->cp_cdb, csio->cdb_len); - } else { - /* I guess I could map it in... */ - ccb->ccb_h.status = CAM_REQ_INVALID; - dptfreeccb(dpt, dccb); - xpt_done(ccb); - return; - } - } else { - bcopy(csio->cdb_io.cdb_bytes, - eccb->cp_cdb, csio->cdb_len); - } - /* - * If we have any data to send with this command, - * map it into bus space. - */ - /* Only use S/G if there is a transfer */ - if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { - int error; - - error = bus_dmamap_load_ccb(dpt->buffer_dmat, - dccb->dmamap, - ccb, - dptexecuteccb, - dccb, /*flags*/0); - if (error == EINPROGRESS) { - /* - * So as to maintain ordering, - * freeze the controller queue - * until our mapping is - * returned. - */ - xpt_freeze_simq(sim, 1); - dccb->state |= CAM_RELEASE_SIMQ; - } - } else { - /* - * XXX JGibbs. - * Does it want them both on or both off? - * CAM_DIR_NONE is both on, so this code can - * be removed if this is also what the DPT - * exptects. - */ - eccb->DataOut = 0; - eccb->DataIn = 0; - dptexecuteccb(dccb, NULL, 0, 0); - } - break; - } - case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ - case XPT_ABORT: /* Abort the specified CCB */ - /* XXX Implement */ - ccb->ccb_h.status = CAM_REQ_INVALID; - xpt_done(ccb); - break; - case XPT_SET_TRAN_SETTINGS: - { - ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; - xpt_done(ccb); - break; - } - case XPT_GET_TRAN_SETTINGS: - /* Get default/user set transfer settings for the target */ - { - struct ccb_trans_settings *cts = &ccb->cts; - struct ccb_trans_settings_scsi *scsi = - &cts->proto_specific.scsi; - struct ccb_trans_settings_spi *spi = - &cts->xport_specific.spi; - - cts->protocol = PROTO_SCSI; - cts->protocol_version = SCSI_REV_2; - cts->transport = XPORT_SPI; - cts->transport_version = 2; - - if (cts->type == CTS_TYPE_USER_SETTINGS) { - spi->flags = CTS_SPI_FLAGS_DISC_ENB; - spi->bus_width = (dpt->max_id > 7) - ? MSG_EXT_WDTR_BUS_8_BIT - : MSG_EXT_WDTR_BUS_16_BIT; - spi->sync_period = 25; /* 10MHz */ - if (spi->sync_period != 0) - spi->sync_offset = 15; - scsi->flags = CTS_SCSI_FLAGS_TAG_ENB; - - spi->valid = CTS_SPI_VALID_SYNC_RATE - | CTS_SPI_VALID_SYNC_OFFSET - | CTS_SPI_VALID_BUS_WIDTH - | CTS_SPI_VALID_DISC; - scsi->valid = CTS_SCSI_VALID_TQ; - ccb->ccb_h.status = CAM_REQ_CMP; - } else { - ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; - } - xpt_done(ccb); - break; - } - case XPT_CALC_GEOMETRY: - { - /* - * XXX Use Adaptec translation until I find out how to - * get this information from the card. - */ - cam_calc_geometry(&ccb->ccg, /*extended*/1); - xpt_done(ccb); - break; - } - case XPT_RESET_BUS: /* Reset the specified SCSI bus */ - { - /* XXX Implement */ - ccb->ccb_h.status = CAM_REQ_CMP; - xpt_done(ccb); - break; - } - case XPT_TERM_IO: /* Terminate the I/O process */ - /* XXX Implement */ - ccb->ccb_h.status = CAM_REQ_INVALID; - xpt_done(ccb); - break; - case XPT_PATH_INQ: /* Path routing inquiry */ - { - struct ccb_pathinq *cpi = &ccb->cpi; - - cpi->version_num = 1; - cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; - if (dpt->max_id > 7) - cpi->hba_inquiry |= PI_WIDE_16; - cpi->target_sprt = 0; - cpi->hba_misc = 0; - cpi->hba_eng_cnt = 0; - cpi->max_target = dpt->max_id; - cpi->max_lun = dpt->max_lun; - cpi->initiator_id = dpt->hostid[cam_sim_bus(sim)]; - cpi->bus_id = cam_sim_bus(sim); - cpi->base_transfer_speed = 3300; - strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); - strlcpy(cpi->hba_vid, "DPT", HBA_IDLEN); - strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); - cpi->unit_number = cam_sim_unit(sim); - cpi->transport = XPORT_SPI; - cpi->transport_version = 2; - cpi->protocol = PROTO_SCSI; - cpi->protocol_version = SCSI_REV_2; - cpi->ccb_h.status = CAM_REQ_CMP; - xpt_done(ccb); - break; - } - default: - ccb->ccb_h.status = CAM_REQ_INVALID; - xpt_done(ccb); - break; - } -} - -/* - * This routine will try to send an EATA command to the DPT HBA. - * It will, by default, try 20,000 times, waiting 50us between tries. - * It returns 0 on success and 1 on failure. - */ -static int -dpt_send_eata_command(dpt_softc_t *dpt, eata_ccb_t *cmd_block, - u_int32_t cmd_busaddr, u_int command, u_int retries, - u_int ifc, u_int code, u_int code2) -{ - u_int loop; - - if (!retries) - retries = 20000; - - /* - * I hate this polling nonsense. Wish there was a way to tell the DPT - * to go get commands at its own pace, or to interrupt when ready. - * In the mean time we will measure how many itterations it really - * takes. - */ - for (loop = 0; loop < retries; loop++) { - if ((dpt_inb(dpt, HA_RAUXSTAT) & HA_ABUSY) == 0) - break; - else - DELAY(50); - } - - if (loop < retries) { -#ifdef DPT_MEASURE_PERFORMANCE - if (loop > dpt->performance.max_eata_tries) - dpt->performance.max_eata_tries = loop; - - if (loop < dpt->performance.min_eata_tries) - dpt->performance.min_eata_tries = loop; -#endif - } else { -#ifdef DPT_MEASURE_PERFORMANCE - ++dpt->performance.command_too_busy; -#endif - return (1); - } - - /* The controller is alive, advance the wedge timer */ -#ifdef DPT_RESET_HBA - dpt->last_contact = microtime_now; -#endif - - if (cmd_block == NULL) - cmd_busaddr = 0; -#if (BYTE_ORDER == BIG_ENDIAN) - else { - cmd_busaddr = ((cmd_busaddr >> 24) & 0xFF) - | ((cmd_busaddr >> 16) & 0xFF) - | ((cmd_busaddr >> 8) & 0xFF) - | (cmd_busaddr & 0xFF); - } -#endif - /* And now the address */ - dpt_outl(dpt, HA_WDMAADDR, cmd_busaddr); - - if (command == EATA_CMD_IMMEDIATE) { - if (cmd_block == NULL) { - dpt_outb(dpt, HA_WCODE2, code2); - dpt_outb(dpt, HA_WCODE, code); - } - dpt_outb(dpt, HA_WIFC, ifc); - } - dpt_outb(dpt, HA_WCOMMAND, command); - - return (0); -} - - -/* ==================== Exported Function definitions =======================*/ -void -dpt_alloc(device_t dev) -{ - dpt_softc_t *dpt = device_get_softc(dev); - int i; - - mtx_init(&dpt->lock, "dpt", NULL, MTX_DEF); - SLIST_INIT(&dpt->free_dccb_list); - LIST_INIT(&dpt->pending_ccb_list); - for (i = 0; i < MAX_CHANNELS; i++) - dpt->resetlevel[i] = DPT_HA_OK; - -#ifdef DPT_MEASURE_PERFORMANCE - dpt_reset_performance(dpt); -#endif /* DPT_MEASURE_PERFORMANCE */ - return; -} - -void -dpt_free(struct dpt_softc *dpt) -{ - switch (dpt->init_level) { - default: - case 5: - bus_dmamap_unload(dpt->dccb_dmat, dpt->dccb_dmamap); - case 4: - bus_dmamem_free(dpt->dccb_dmat, dpt->dpt_dccbs, - dpt->dccb_dmamap); - case 3: - bus_dma_tag_destroy(dpt->dccb_dmat); - case 2: - bus_dma_tag_destroy(dpt->buffer_dmat); - case 1: - { - struct sg_map_node *sg_map; - - while ((sg_map = SLIST_FIRST(&dpt->sg_maps)) != NULL) { - SLIST_REMOVE_HEAD(&dpt->sg_maps, links); - bus_dmamap_unload(dpt->sg_dmat, - sg_map->sg_dmamap); - bus_dmamem_free(dpt->sg_dmat, sg_map->sg_vaddr, - sg_map->sg_dmamap); - free(sg_map, M_DEVBUF); - } - bus_dma_tag_destroy(dpt->sg_dmat); - } - case 0: - break; - } - mtx_destroy(&dpt->lock); -} - -int -dpt_alloc_resources (device_t dev) -{ - dpt_softc_t * dpt; - int error; - - dpt = device_get_softc(dev); - - dpt->io_res = bus_alloc_resource_any(dev, dpt->io_type, &dpt->io_rid, - RF_ACTIVE); - if (dpt->io_res == NULL) { - device_printf(dev, "No I/O space?!\n"); - error = ENOMEM; - goto bad; - } - - dpt->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &dpt->irq_rid, - RF_ACTIVE); - if (dpt->irq_res == NULL) { - device_printf(dev, "No IRQ!\n"); - error = ENOMEM; - goto bad; - } - - return (0); -bad: - return(error); -} - - -void -dpt_release_resources (device_t dev) -{ - struct dpt_softc * dpt; - - dpt = device_get_softc(dev); - - if (dpt->ih) - bus_teardown_intr(dev, dpt->irq_res, dpt->ih); - if (dpt->io_res) - bus_release_resource(dev, dpt->io_type, dpt->io_rid, dpt->io_res); - if (dpt->irq_res) - bus_release_resource(dev, SYS_RES_IRQ, dpt->irq_rid, dpt->irq_res); - if (dpt->drq_res) - bus_release_resource(dev, SYS_RES_DRQ, dpt->drq_rid, dpt->drq_res); - - return; -} - -static u_int8_t string_sizes[] = -{ - sizeof(((dpt_inq_t*)NULL)->vendor), - sizeof(((dpt_inq_t*)NULL)->modelNum), - sizeof(((dpt_inq_t*)NULL)->firmware), - sizeof(((dpt_inq_t*)NULL)->protocol), -}; - -int -dpt_init(struct dpt_softc *dpt) -{ - dpt_conf_t conf; - struct sg_map_node *sg_map; - dpt_ccb_t *dccb; - u_int8_t *strp; - int index; - int i; - int retval; - - dpt->init_level = 0; - SLIST_INIT(&dpt->sg_maps); - mtx_lock(&dpt->lock); - -#ifdef DPT_RESET_BOARD - device_printf(dpt->dev, "resetting HBA\n"); - dpt_outb(dpt, HA_WCOMMAND, EATA_CMD_RESET); - DELAY(750000); - /* XXX Shouldn't we poll a status register or something??? */ -#endif - /* DMA tag for our S/G structures. We allocate in page sized chunks */ - if (bus_dma_tag_create( /* parent */ dpt->parent_dmat, - /* alignment */ 1, - /* boundary */ 0, - /* lowaddr */ BUS_SPACE_MAXADDR, - /* highaddr */ BUS_SPACE_MAXADDR, - /* filter */ NULL, - /* filterarg */ NULL, - /* maxsize */ PAGE_SIZE, - /* nsegments */ 1, - /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, - /* flags */ 0, - /* lockfunc */ NULL, - /* lockarg */ NULL, - &dpt->sg_dmat) != 0) { - goto error_exit; - } - - dpt->init_level++; - - /* - * We allocate our DPT ccbs as a contiguous array of bus dma'able - * memory. To get the allocation size, we need to know how many - * ccbs the card supports. This requires a ccb. We solve this - * chicken and egg problem by allocating some re-usable S/G space - * up front, and treating it as our status packet, CCB, and target - * memory space for these commands. - */ - sg_map = dptallocsgmap(dpt); - if (sg_map == NULL) - goto error_exit; - - dpt->sp = (volatile dpt_sp_t *)sg_map->sg_vaddr; - dccb = (struct dpt_ccb *)(uintptr_t)(volatile void *)&dpt->sp[1]; - bzero(dccb, sizeof(*dccb)); - dpt->sp_physaddr = sg_map->sg_physaddr; - dccb->eata_ccb.cp_dataDMA = - htonl(sg_map->sg_physaddr + sizeof(dpt_sp_t) + sizeof(*dccb)); - dccb->eata_ccb.cp_busaddr = ~0; - dccb->eata_ccb.cp_statDMA = htonl(dpt->sp_physaddr); - dccb->eata_ccb.cp_reqDMA = htonl(dpt->sp_physaddr + sizeof(*dccb) - + offsetof(struct dpt_ccb, sense_data)); - - /* Okay. Fetch our config */ - bzero(&dccb[1], sizeof(conf)); /* data area */ - retval = dpt_get_conf(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t), - sizeof(conf), 0xc1, 7, 1); - - if (retval != 0) { - device_printf(dpt->dev, "Failed to get board configuration\n"); - goto error_exit; - } - bcopy(&dccb[1], &conf, sizeof(conf)); - - bzero(&dccb[1], sizeof(dpt->board_data)); - retval = dpt_get_conf(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t), - sizeof(dpt->board_data), 0, conf.scsi_id0, 0); - if (retval != 0) { - device_printf(dpt->dev, "Failed to get inquiry information\n"); - goto error_exit; - } - bcopy(&dccb[1], &dpt->board_data, sizeof(dpt->board_data)); - - dpt_detect_cache(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t), - (u_int8_t *)&dccb[1]); - - switch (ntohl(conf.splen)) { - case DPT_EATA_REVA: - dpt->EATA_revision = 'a'; - break; - case DPT_EATA_REVB: - dpt->EATA_revision = 'b'; - break; - case DPT_EATA_REVC: - dpt->EATA_revision = 'c'; - break; - case DPT_EATA_REVZ: - dpt->EATA_revision = 'z'; - break; - default: - dpt->EATA_revision = '?'; - } - - dpt->max_id = conf.MAX_ID; - dpt->max_lun = conf.MAX_LUN; - dpt->irq = conf.IRQ; - dpt->dma_channel = (8 - conf.DMA_channel) & 7; - dpt->channels = conf.MAX_CHAN + 1; - dpt->state |= DPT_HA_OK; - if (conf.SECOND) - dpt->primary = FALSE; - else - dpt->primary = TRUE; - - dpt->more_support = conf.MORE_support; - - if (strncmp(dpt->board_data.firmware, "07G0", 4) >= 0) - dpt->immediate_support = 1; - else - dpt->immediate_support = 0; - - dpt->cplen = ntohl(conf.cplen); - dpt->cppadlen = ntohs(conf.cppadlen); - dpt->max_dccbs = ntohs(conf.queuesiz); - - if (dpt->max_dccbs > 256) { - device_printf(dpt->dev, "Max CCBs reduced from %d to " - "256 due to tag algorithm\n", dpt->max_dccbs); - dpt->max_dccbs = 256; - } - - dpt->hostid[0] = conf.scsi_id0; - dpt->hostid[1] = conf.scsi_id1; - dpt->hostid[2] = conf.scsi_id2; - - if (conf.SG_64K) - dpt->sgsize = 8192; - else - dpt->sgsize = ntohs(conf.SGsiz); - - /* We can only get 64k buffers, so don't bother to waste space. */ - if (dpt->sgsize < 17 || dpt->sgsize > 32) - dpt->sgsize = 32; - - if (dpt->sgsize > dpt_max_segs) - dpt->sgsize = dpt_max_segs; - - /* DMA tag for mapping buffers into device visible space. */ - if (bus_dma_tag_create( /* parent */ dpt->parent_dmat, - /* alignment */ 1, - /* boundary */ 0, - /* lowaddr */ BUS_SPACE_MAXADDR, - /* highaddr */ BUS_SPACE_MAXADDR, - /* filter */ NULL, - /* filterarg */ NULL, - /* maxsize */ DFLTPHYS, - /* nsegments */ dpt->sgsize, - /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, - /* flags */ BUS_DMA_ALLOCNOW, - /* lockfunc */ busdma_lock_mutex, - /* lockarg */ &dpt->lock, - &dpt->buffer_dmat) != 0) { - device_printf(dpt->dev, - "bus_dma_tag_create(...,dpt->buffer_dmat) failed\n"); - goto error_exit; - } - - dpt->init_level++; - - /* DMA tag for our ccb structures and interrupt status packet */ - if (bus_dma_tag_create( /* parent */ dpt->parent_dmat, - /* alignment */ 1, - /* boundary */ 0, - /* lowaddr */ BUS_SPACE_MAXADDR, - /* highaddr */ BUS_SPACE_MAXADDR, - /* filter */ NULL, - /* filterarg */ NULL, - /* maxsize */ (dpt->max_dccbs * - sizeof(struct dpt_ccb)) + - sizeof(dpt_sp_t), - /* nsegments */ 1, - /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, - /* flags */ 0, - /* lockfunc */ NULL, - /* lockarg */ NULL, - &dpt->dccb_dmat) != 0) { - device_printf(dpt->dev, - "bus_dma_tag_create(...,dpt->dccb_dmat) failed\n"); - goto error_exit; - } - - dpt->init_level++; - - /* Allocation for our ccbs and interrupt status packet */ - if (bus_dmamem_alloc(dpt->dccb_dmat, (void **)&dpt->dpt_dccbs, - BUS_DMA_NOWAIT, &dpt->dccb_dmamap) != 0) { - device_printf(dpt->dev, - "bus_dmamem_alloc(dpt->dccb_dmat,...) failed\n"); - goto error_exit; - } - - dpt->init_level++; - - /* And permanently map them */ - bus_dmamap_load(dpt->dccb_dmat, dpt->dccb_dmamap, - dpt->dpt_dccbs, - (dpt->max_dccbs * sizeof(struct dpt_ccb)) - + sizeof(dpt_sp_t), - dptmapmem, &dpt->dpt_ccb_busbase, /*flags*/0); - - /* Clear them out. */ - bzero(dpt->dpt_dccbs, - (dpt->max_dccbs * sizeof(struct dpt_ccb)) + sizeof(dpt_sp_t)); - - dpt->dpt_ccb_busend = dpt->dpt_ccb_busbase; - - dpt->sp = (dpt_sp_t*)&dpt->dpt_dccbs[dpt->max_dccbs]; - dpt->sp_physaddr = dpt->dpt_ccb_busbase - + (dpt->max_dccbs * sizeof(dpt_ccb_t)); - dpt->init_level++; - - /* Allocate our first batch of ccbs */ - if (dptallocccbs(dpt) == 0) { - device_printf(dpt->dev, "dptallocccbs(dpt) == 0\n"); - mtx_unlock(&dpt->lock); - return (2); - } - - /* Prepare for Target Mode */ - dpt->target_mode_enabled = 1; - - /* Nuke excess spaces from inquiry information */ - strp = dpt->board_data.vendor; - for (i = 0; i < sizeof(string_sizes); i++) { - index = string_sizes[i] - 1; - while (index && (strp[index] == ' ')) - strp[index--] = '\0'; - strp += string_sizes[i]; - } - - device_printf(dpt->dev, "%.8s %.16s FW Rev. %.4s, ", - dpt->board_data.vendor, - dpt->board_data.modelNum, dpt->board_data.firmware); - - printf("%d channel%s, ", dpt->channels, dpt->channels > 1 ? "s" : ""); - - if (dpt->cache_type != DPT_NO_CACHE - && dpt->cache_size != 0) { - printf("%s Cache, ", - dpt->cache_type == DPT_CACHE_WRITETHROUGH - ? "Write-Through" : "Write-Back"); - } - - printf("%d CCBs\n", dpt->max_dccbs); - mtx_unlock(&dpt->lock); - return (0); - -error_exit: - mtx_unlock(&dpt->lock); - return (1); -} - -int -dpt_attach(dpt_softc_t *dpt) -{ - struct cam_devq *devq; - int i; - - /* - * Create the device queue for our SIM. - */ - devq = cam_simq_alloc(dpt->max_dccbs); - if (devq == NULL) - return (0); - - mtx_lock(&dpt->lock); - for (i = 0; i < dpt->channels; i++) { - /* - * Construct our SIM entry - */ - dpt->sims[i] = cam_sim_alloc(dpt_action, dpt_poll, "dpt", - dpt, device_get_unit(dpt->dev), &dpt->lock, - /*untagged*/2, - /*tagged*/dpt->max_dccbs, devq); - if (dpt->sims[i] == NULL) { - if (i == 0) - cam_simq_free(devq); - else - printf( "%s(): Unable to attach bus %d " - "due to resource shortage\n", - __func__, i); - break; - } - - if (xpt_bus_register(dpt->sims[i], dpt->dev, i) != CAM_SUCCESS){ - cam_sim_free(dpt->sims[i], /*free_devq*/i == 0); - dpt->sims[i] = NULL; - break; - } - - if (xpt_create_path(&dpt->paths[i], /*periph*/NULL, - cam_sim_path(dpt->sims[i]), - CAM_TARGET_WILDCARD, - CAM_LUN_WILDCARD) != CAM_REQ_CMP) { - xpt_bus_deregister(cam_sim_path(dpt->sims[i])); - cam_sim_free(dpt->sims[i], /*free_devq*/i == 0); - dpt->sims[i] = NULL; - break; - } - - } - mtx_unlock(&dpt->lock); - if (i > 0) - EVENTHANDLER_REGISTER(shutdown_final, dptshutdown, - dpt, SHUTDOWN_PRI_DEFAULT); - return (i); -} - -int -dpt_detach (device_t dev) -{ - struct dpt_softc * dpt; - int i; - - dpt = device_get_softc(dev); - - mtx_lock(&dpt->lock); - for (i = 0; i < dpt->channels; i++) { -#if 0 - xpt_async(AC_LOST_DEVICE, dpt->paths[i], NULL); -#endif - xpt_free_path(dpt->paths[i]); - xpt_bus_deregister(cam_sim_path(dpt->sims[i])); - cam_sim_free(dpt->sims[i], /*free_devq*/TRUE); - } - mtx_unlock(&dpt->lock); - - dptshutdown((void *)dpt, SHUTDOWN_PRI_DEFAULT); - - dpt_release_resources(dev); - - dpt_free(dpt); - - return (0); -} - -/* - * This is the interrupt handler for the DPT driver. - */ -void -dpt_intr(void *arg) -{ - dpt_softc_t *dpt; - - dpt = arg; - mtx_lock(&dpt->lock); - dpt_intr_locked(dpt); - mtx_unlock(&dpt->lock); -} - -void -dpt_intr_locked(dpt_softc_t *dpt) -{ - dpt_ccb_t *dccb; - union ccb *ccb; - u_int status; - u_int aux_status; - u_int hba_stat; - u_int scsi_stat; - u_int32_t residue_len; /* Number of bytes not transferred */ - - /* First order of business is to check if this interrupt is for us */ - while (((aux_status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ) != 0) { - - /* - * What we want to do now, is to capture the status, all of it, - * move it where it belongs, wake up whoever sleeps waiting to - * process this result, and get out of here. - */ - if (dpt->sp->ccb_busaddr < dpt->dpt_ccb_busbase - || dpt->sp->ccb_busaddr >= dpt->dpt_ccb_busend) { - device_printf(dpt->dev, - "Encountered bogus status packet\n"); - status = dpt_inb(dpt, HA_RSTATUS); - return; - } - - dccb = dptccbptov(dpt, dpt->sp->ccb_busaddr); - - dpt->sp->ccb_busaddr = ~0; - - /* Ignore status packets with EOC not set */ - if (dpt->sp->EOC == 0) { - device_printf(dpt->dev, - "ERROR: Request %d received with " - "clear EOC.\n Marking as LOST.\n", - dccb->transaction_id); - - /* This CLEARS the interrupt! */ - status = dpt_inb(dpt, HA_RSTATUS); - continue; - } - dpt->sp->EOC = 0; - - /* - * Double buffer the status information so the hardware can - * work on updating the status packet while we decifer the - * one we were just interrupted for. - * According to Mark Salyzyn, we only need few pieces of it. - */ - hba_stat = dpt->sp->hba_stat; - scsi_stat = dpt->sp->scsi_stat; - residue_len = dpt->sp->residue_len; - - /* Clear interrupts, check for error */ - if ((status = dpt_inb(dpt, HA_RSTATUS)) & HA_SERROR) { - /* - * Error Condition. Check for magic cookie. Exit - * this test on earliest sign of non-reset condition - */ - - /* Check that this is not a board reset interrupt */ - if (dpt_just_reset(dpt)) { - device_printf(dpt->dev, "HBA rebooted.\n" - " All transactions should be " - "resubmitted\n"); - - device_printf(dpt->dev, - ">>---->> This is incomplete, " - "fix me.... <<----<<"); - panic("DPT Rebooted"); - - } - } - /* Process CCB */ - ccb = dccb->ccb; - callout_stop(&dccb->timer); - if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { - bus_dmasync_op_t op; - - if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) - op = BUS_DMASYNC_POSTREAD; - else - op = BUS_DMASYNC_POSTWRITE; - bus_dmamap_sync(dpt->buffer_dmat, dccb->dmamap, op); - bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap); - } - - /* Common Case inline... */ - if (hba_stat == HA_NO_ERROR) { - ccb->csio.scsi_status = scsi_stat; - ccb->ccb_h.status = 0; - switch (scsi_stat) { - case SCSI_STATUS_OK: - ccb->ccb_h.status |= CAM_REQ_CMP; - break; - case SCSI_STATUS_CHECK_COND: - case SCSI_STATUS_CMD_TERMINATED: - bcopy(&dccb->sense_data, &ccb->csio.sense_data, - ccb->csio.sense_len); - ccb->ccb_h.status |= CAM_AUTOSNS_VALID; - /* FALLTHROUGH */ - default: - ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; - /* XXX Freeze DevQ */ - break; - } - ccb->csio.resid = residue_len; - dptfreeccb(dpt, dccb); - xpt_done(ccb); - } else { - dptprocesserror(dpt, dccb, ccb, hba_stat, scsi_stat, - residue_len); - } - } -} - -static void -dptprocesserror(dpt_softc_t *dpt, dpt_ccb_t *dccb, union ccb *ccb, - u_int hba_stat, u_int scsi_stat, u_int32_t resid) -{ - ccb->csio.resid = resid; - switch (hba_stat) { - case HA_ERR_SEL_TO: - ccb->ccb_h.status = CAM_SEL_TIMEOUT; - break; - case HA_ERR_CMD_TO: - ccb->ccb_h.status = CAM_CMD_TIMEOUT; - break; - case HA_SCSIBUS_RESET: - case HA_HBA_POWER_UP: /* Similar effect to a bus reset??? */ - ccb->ccb_h.status = CAM_SCSI_BUS_RESET; - break; - case HA_CP_ABORTED: - case HA_CP_RESET: /* XXX ??? */ - case HA_CP_ABORT_NA: /* XXX ??? */ - case HA_CP_RESET_NA: /* XXX ??? */ - if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) - ccb->ccb_h.status = CAM_REQ_ABORTED; - break; - case HA_PCI_PARITY: - case HA_PCI_MABORT: - case HA_PCI_TABORT: - case HA_PCI_STABORT: - case HA_BUS_PARITY: - case HA_PARITY_ERR: - case HA_ECC_ERR: - ccb->ccb_h.status = CAM_UNCOR_PARITY; - break; - case HA_UNX_MSGRJCT: - ccb->ccb_h.status = CAM_MSG_REJECT_REC; - break; - case HA_UNX_BUSPHASE: - ccb->ccb_h.status = CAM_SEQUENCE_FAIL; - break; - case HA_UNX_BUS_FREE: - ccb->ccb_h.status = CAM_UNEXP_BUSFREE; - break; - case HA_SCSI_HUNG: - case HA_RESET_STUCK: - /* - * Dead??? Can the controller get unstuck - * from these conditions - */ - ccb->ccb_h.status = CAM_NO_HBA; - break; - case HA_RSENSE_FAIL: - ccb->ccb_h.status = CAM_AUTOSENSE_FAIL; - break; - default: - device_printf(dpt->dev, "Undocumented Error %x\n", hba_stat); - printf("Please mail this message to shimon@simon-shapiro.org\n"); - ccb->ccb_h.status = CAM_REQ_CMP_ERR; - break; - } - dptfreeccb(dpt, dccb); - xpt_done(ccb); -} - -static void -dpttimeout(void *arg) -{ - struct dpt_ccb *dccb; - union ccb *ccb; - struct dpt_softc *dpt; - - dccb = (struct dpt_ccb *)arg; - ccb = dccb->ccb; - dpt = (struct dpt_softc *)ccb->ccb_h.ccb_dpt_ptr; - mtx_assert(&dpt->lock, MA_OWNED); - xpt_print_path(ccb->ccb_h.path); - printf("CCB %p - timed out\n", (void *)dccb); - - /* - * Try to clear any pending jobs. FreeBSD will lose interrupts, - * leaving the controller suspended, and commands timed-out. - * By calling the interrupt handler, any command thus stuck will be - * completed. - */ - dpt_intr_locked(dpt); - - if ((dccb->state & DCCB_ACTIVE) == 0) { - xpt_print_path(ccb->ccb_h.path); - printf("CCB %p - timed out CCB already completed\n", - (void *)dccb); - return; - } - - /* Abort this particular command. Leave all others running */ - dpt_send_immediate(dpt, &dccb->eata_ccb, dccb->eata_ccb.cp_busaddr, - /*retries*/20000, EATA_SPECIFIC_ABORT, 0, 0); - ccb->ccb_h.status = CAM_CMD_TIMEOUT; -} - -/* - * Shutdown the controller and ensure that the cache is completely flushed. - * Called from the shutdown_final event after all disk access has completed. - */ -static void -dptshutdown(void *arg, int howto) -{ - dpt_softc_t *dpt; - - dpt = (dpt_softc_t *)arg; - - device_printf(dpt->dev, - "Shutting down (mode %x) HBA. Please wait...\n", howto); - - /* - * What we do for a shutdown, is give the DPT early power loss warning - */ - mtx_lock(&dpt->lock); - dpt_send_immediate(dpt, NULL, 0, EATA_POWER_OFF_WARN, 0, 0, 0); - mtx_unlock(&dpt->lock); - DELAY(1000 * 1000 * 5); - device_printf(dpt->dev, "Controller was warned of shutdown and is now " - "disabled\n"); -} - -/*============================================================================*/ - -#if 0 -#ifdef DPT_RESET_HBA - -/* -** Function name : dpt_reset_hba -** -** Description : Reset the HBA and properly discard all pending work -** Input : Softc -** Output : Nothing -*/ -static void -dpt_reset_hba(dpt_softc_t *dpt) -{ - eata_ccb_t *ccb; - dpt_ccb_t dccb, *dccbp; - int result; - struct scsi_xfer *xs; - - mtx_assert(&dpt->lock, MA_OWNED); - - /* Prepare a control block. The SCSI command part is immaterial */ - dccb.xs = NULL; - dccb.flags = 0; - dccb.state = DPT_CCB_STATE_NEW; - dccb.std_callback = NULL; - dccb.wrbuff_callback = NULL; - - ccb = &dccb.eata_ccb; - ccb->CP_OpCode = EATA_CMD_RESET; - ccb->SCSI_Reset = 0; - ccb->HBA_Init = 1; - ccb->Auto_Req_Sen = 1; - ccb->cp_id = 0; /* Should be ignored */ - ccb->DataIn = 1; - ccb->DataOut = 0; - ccb->Interpret = 1; - ccb->reqlen = htonl(sizeof(struct scsi_sense_data)); - ccb->cp_statDMA = htonl(vtophys(&ccb->cp_statDMA)); - ccb->cp_reqDMA = htonl(vtophys(&ccb->cp_reqDMA)); - ccb->cp_viraddr = (u_int32_t) & ccb; - - ccb->cp_msg[0] = HA_IDENTIFY_MSG | HA_DISCO_RECO; - ccb->cp_scsi_cmd = 0; /* Should be ignored */ - - /* Lock up the submitted queue. We are very persistent here */ - while (dpt->queue_status & DPT_SUBMITTED_QUEUE_ACTIVE) { - DELAY(100); - } - - dpt->queue_status |= DPT_SUBMITTED_QUEUE_ACTIVE; - - /* Send the RESET message */ - if ((result = dpt_send_eata_command(dpt, &dccb.eata_ccb, - EATA_CMD_RESET, 0, 0, 0, 0)) != 0) { - device_printf(dpt->dev, "Failed to send the RESET message.\n" - " Trying cold boot (ouch!)\n"); - - - if ((result = dpt_send_eata_command(dpt, &dccb.eata_ccb, - EATA_COLD_BOOT, 0, 0, - 0, 0)) != 0) { - panic("%s: Faild to cold boot the HBA\n", - device_get_nameunit(dpt->dev)); - } -#ifdef DPT_MEASURE_PERFORMANCE - dpt->performance.cold_boots++; -#endif /* DPT_MEASURE_PERFORMANCE */ - } - -#ifdef DPT_MEASURE_PERFORMANCE - dpt->performance.warm_starts++; -#endif /* DPT_MEASURE_PERFORMANCE */ - - device_printf(dpt->dev, - "Aborting pending requests. O/S should re-submit\n"); - - while ((dccbp = TAILQ_FIRST(&dpt->completed_ccbs)) != NULL) { - struct scsi_xfer *xs = dccbp->xs; - - /* Not all transactions have xs structs */ - if (xs != NULL) { - /* Tell the kernel proper this did not complete well */ - xs->error |= XS_SELTIMEOUT; - xs->flags |= SCSI_ITSDONE; - scsi_done(xs); - } - - dpt_Qremove_submitted(dpt, dccbp); - - /* Remember, Callbacks are NOT in the standard queue */ - if (dccbp->std_callback != NULL) { - (dccbp->std_callback)(dpt, dccbp->eata_ccb.cp_channel, - dccbp); - } else { - dpt_Qpush_free(dpt, dccbp); - } - } - - device_printf(dpt->dev, "reset done aborting all pending commands\n"); - dpt->queue_status &= ~DPT_SUBMITTED_QUEUE_ACTIVE; -} - -#endif /* DPT_RESET_HBA */ - -/* - * Build a Command Block for target mode READ/WRITE BUFFER, - * with the ``sync'' bit ON. - * - * Although the length and offset are 24 bit fields in the command, they cannot - * exceed 8192 bytes, so we take them as short integers andcheck their range. - * If they are sensless, we round them to zero offset, maximum length and - * complain. - */ - -static void -dpt_target_ccb(dpt_softc_t * dpt, int bus, u_int8_t target, u_int8_t lun, - dpt_ccb_t * ccb, int mode, u_int8_t command, - u_int16_t length, u_int16_t offset) -{ - eata_ccb_t *cp; - - mtx_assert(&dpt->lock, MA_OWNED); - if ((length + offset) > DPT_MAX_TARGET_MODE_BUFFER_SIZE) { - device_printf(dpt->dev, - "Length of %d, and offset of %d are wrong\n", - length, offset); - length = DPT_MAX_TARGET_MODE_BUFFER_SIZE; - offset = 0; - } - ccb->xs = NULL; - ccb->flags = 0; - ccb->state = DPT_CCB_STATE_NEW; - ccb->std_callback = (ccb_callback) dpt_target_done; - ccb->wrbuff_callback = NULL; - - cp = &ccb->eata_ccb; - cp->CP_OpCode = EATA_CMD_DMA_SEND_CP; - cp->SCSI_Reset = 0; - cp->HBA_Init = 0; - cp->Auto_Req_Sen = 1; - cp->cp_id = target; - cp->DataIn = 1; - cp->DataOut = 0; - cp->Interpret = 0; - cp->reqlen = htonl(sizeof(struct scsi_sense_data)); - cp->cp_statDMA = htonl(vtophys(&cp->cp_statDMA)); - cp->cp_reqDMA = htonl(vtophys(&cp->cp_reqDMA)); - cp->cp_viraddr = (u_int32_t) & ccb; - - cp->cp_msg[0] = HA_IDENTIFY_MSG | HA_DISCO_RECO; - - cp->cp_scsi_cmd = command; - cp->cp_cdb[1] = (u_int8_t) (mode & SCSI_TM_MODE_MASK); - cp->cp_lun = lun; /* Order is important here! */ - cp->cp_cdb[2] = 0x00; /* Buffer Id, only 1 :-( */ - cp->cp_cdb[3] = (length >> 16) & 0xFF; /* Buffer offset MSB */ - cp->cp_cdb[4] = (length >> 8) & 0xFF; - cp->cp_cdb[5] = length & 0xFF; - cp->cp_cdb[6] = (length >> 16) & 0xFF; /* Length MSB */ - cp->cp_cdb[7] = (length >> 8) & 0xFF; - cp->cp_cdb[8] = length & 0xFF; /* Length LSB */ - cp->cp_cdb[9] = 0; /* No sync, no match bits */ - - /* - * This could be optimized to live in dpt_register_buffer. - * We keep it here, just in case the kernel decides to reallocate pages - */ - if (dpt_scatter_gather(dpt, ccb, DPT_RW_BUFFER_SIZE, - dpt->rw_buffer[bus][target][lun])) { - device_printf(dpt->dev, "Failed to setup Scatter/Gather for " - "Target-Mode buffer\n"); - } -} - -/* Setup a target mode READ command */ - -static void -dpt_set_target(int redo, dpt_softc_t * dpt, - u_int8_t bus, u_int8_t target, u_int8_t lun, int mode, - u_int16_t length, u_int16_t offset, dpt_ccb_t * ccb) -{ - - mtx_assert(&dpt->lock, MA_OWNED); - if (dpt->target_mode_enabled) { - if (!redo) - dpt_target_ccb(dpt, bus, target, lun, ccb, mode, - SCSI_TM_READ_BUFFER, length, offset); - - ccb->transaction_id = ++dpt->commands_processed; - -#ifdef DPT_MEASURE_PERFORMANCE - dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd]++; - ccb->command_started = microtime_now; -#endif - dpt_Qadd_waiting(dpt, ccb); - dpt_sched_queue(dpt); - } else { - device_printf(dpt->dev, - "Target Mode Request, but Target Mode is OFF\n"); - } -} - -/* - * Schedule a buffer to be sent to another target. - * The work will be scheduled and the callback provided will be called when - * the work is actually done. - * - * Please NOTE: ``Anyone'' can send a buffer, but only registered clients - * get notified of receipt of buffers. - */ - -int -dpt_send_buffer(int unit, u_int8_t channel, u_int8_t target, u_int8_t lun, - u_int8_t mode, u_int16_t length, u_int16_t offset, void *data, - buff_wr_done callback) -{ - dpt_softc_t *dpt; - dpt_ccb_t *ccb = NULL; - - /* This is an external call. Be a bit paranoid */ - dpt = devclass_get_device(dpt_devclass, unit); - if (dpt == NULL) - return (INVALID_UNIT); - - mtx_lock(&dpt->lock); - if (dpt->target_mode_enabled) { - if ((channel >= dpt->channels) || (target > dpt->max_id) || - (lun > dpt->max_lun)) { - mtx_unlock(&dpt->lock); - return (INVALID_SENDER); - } - if ((dpt->rw_buffer[channel][target][lun] == NULL) || - (dpt->buffer_receiver[channel][target][lun] == NULL)) { - mtx_unlock(&dpt->lock); - return (NOT_REGISTERED); - } - - /* Process the free list */ - if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) { - device_printf(dpt->dev, - "ERROR: Cannot allocate any more free CCB's.\n" - " Please try later\n"); - mtx_unlock(&dpt->lock); - return (NO_RESOURCES); - } - /* Now grab the newest CCB */ - if ((ccb = dpt_Qpop_free(dpt)) == NULL) { - mtx_unlock(&dpt->lock); - panic("%s: Got a NULL CCB from pop_free()\n", - device_get_nameunit(dpt->dev)); - } - - bcopy(dpt->rw_buffer[channel][target][lun] + offset, data, length); - dpt_target_ccb(dpt, channel, target, lun, ccb, mode, - SCSI_TM_WRITE_BUFFER, - length, offset); - ccb->std_callback = (ccb_callback) callback; /* Potential trouble */ - - ccb->transaction_id = ++dpt->commands_processed; - -#ifdef DPT_MEASURE_PERFORMANCE - dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd]++; - ccb->command_started = microtime_now; -#endif - dpt_Qadd_waiting(dpt, ccb); - dpt_sched_queue(dpt); - - mtx_unlock(&dpt->lock); - return (0); - } - mtx_unlock(&dpt->lock); - return (DRIVER_DOWN); -} - -static void -dpt_target_done(dpt_softc_t * dpt, int bus, dpt_ccb_t * ccb) -{ - eata_ccb_t *cp; - - cp = &ccb->eata_ccb; - - /* - * Remove the CCB from the waiting queue. - * We do NOT put it back on the free, etc., queues as it is a special - * ccb, owned by the dpt_softc of this unit. - */ - dpt_Qremove_completed(dpt, ccb); - -#define br_channel (ccb->eata_ccb.cp_channel) -#define br_target (ccb->eata_ccb.cp_id) -#define br_lun (ccb->eata_ccb.cp_LUN) -#define br_index [br_channel][br_target][br_lun] -#define read_buffer_callback (dpt->buffer_receiver br_index ) -#define read_buffer (dpt->rw_buffer[br_channel][br_target][br_lun]) -#define cb(offset) (ccb->eata_ccb.cp_cdb[offset]) -#define br_offset ((cb(3) << 16) | (cb(4) << 8) | cb(5)) -#define br_length ((cb(6) << 16) | (cb(7) << 8) | cb(8)) - - /* Different reasons for being here, you know... */ - switch (ccb->eata_ccb.cp_scsi_cmd) { - case SCSI_TM_READ_BUFFER: - if (read_buffer_callback != NULL) { - /* This is a buffer generated by a kernel process */ - read_buffer_callback(device_get_unit(dpt->dev), - br_channel, br_target, br_lun, - read_buffer, - br_offset, br_length); - } else { - /* - * This is a buffer waited for by a user (sleeping) - * command - */ - wakeup(ccb); - } - - /* We ALWAYS re-issue the same command; args are don't-care */ - dpt_set_target(1, 0, 0, 0, 0, 0, 0, 0, 0); - break; - - case SCSI_TM_WRITE_BUFFER: - (ccb->wrbuff_callback) (device_get_unit(dpt->dev), br_channel, - br_target, br_offset, br_length, - br_lun, ccb->status_packet.hba_stat); - break; - default: - device_printf(dpt->dev, - "%s is an unsupported command for target mode\n", - scsi_cmd_name(ccb->eata_ccb.cp_scsi_cmd)); - } - dpt->target_ccb[br_channel][br_target][br_lun] = NULL; - dpt_Qpush_free(dpt, ccb); -} - - -/* - * Use this function to register a client for a buffer read target operation. - * The function you register will be called every time a buffer is received - * by the target mode code. - */ -dpt_rb_t -dpt_register_buffer(int unit, u_int8_t channel, u_int8_t target, u_int8_t lun, - u_int8_t mode, u_int16_t length, u_int16_t offset, - dpt_rec_buff callback, dpt_rb_op_t op) -{ - dpt_softc_t *dpt; - dpt_ccb_t *ccb = NULL; - int ospl; - - dpt = devclass_get_device(dpt_devclass, unit); - if (dpt == NULL) - return (INVALID_UNIT); - mtx_lock(&dpt->lock); - - if (dpt->state & DPT_HA_SHUTDOWN_ACTIVE) { - mtx_unlock(&dpt->lock); - return (DRIVER_DOWN); - } - - if ((channel > (dpt->channels - 1)) || (target > (dpt->max_id - 1)) || - (lun > (dpt->max_lun - 1))) { - mtx_unlock(&dpt->lock); - return (INVALID_SENDER); - } - - if (dpt->buffer_receiver[channel][target][lun] == NULL) { - if (op == REGISTER_BUFFER) { - /* Assign the requested callback */ - dpt->buffer_receiver[channel][target][lun] = callback; - /* Get a CCB */ - - /* Process the free list */ - if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) { - device_printf(dpt->dev, - "ERROR: Cannot allocate any more free CCB's.\n" - " Please try later\n"); - mtx_unlock(&dpt->lock); - return (NO_RESOURCES); - } - /* Now grab the newest CCB */ - if ((ccb = dpt_Qpop_free(dpt)) == NULL) { - mtx_unlock(&dpt->lock); - panic("%s: Got a NULL CCB from pop_free()\n", - device_get_nameunit(dpt->dev)); - } - - /* Clean up the leftover of the previous tenant */ - ccb->status = DPT_CCB_STATE_NEW; - dpt->target_ccb[channel][target][lun] = ccb; - - dpt->rw_buffer[channel][target][lun] = - malloc(DPT_RW_BUFFER_SIZE, M_DEVBUF, M_NOWAIT); - if (dpt->rw_buffer[channel][target][lun] == NULL) { - device_printf(dpt->dev, "Failed to allocate " - "Target-Mode buffer\n"); - dpt_Qpush_free(dpt, ccb); - mtx_unlock(&dpt->lock); - return (NO_RESOURCES); - } - dpt_set_target(0, dpt, channel, target, lun, mode, - length, offset, ccb); - mtx_unlock(&dpt->lock); - return (SUCCESSFULLY_REGISTERED); - } else { - mtx_unlock(&dpt->lock); - return (NOT_REGISTERED); - } - } else { - if (op == REGISTER_BUFFER) { - if (dpt->buffer_receiver[channel][target][lun] == callback) { - mtx_unlock(&dpt->lock); - return (ALREADY_REGISTERED); - } else { - mtx_unlock(&dpt->lock); - return (REGISTERED_TO_ANOTHER); - } - } else { - if (dpt->buffer_receiver[channel][target][lun] == callback) { - dpt->buffer_receiver[channel][target][lun] = NULL; - dpt_Qpush_free(dpt, ccb); - free(dpt->rw_buffer[channel][target][lun], M_DEVBUF); - mtx_unlock(&dpt->lock); - return (SUCCESSFULLY_REGISTERED); - } else { - mtx_unlock(&dpt->lock); - return (INVALID_CALLBACK); - } - } - - } - mtx_unlock(&dpt->lock); -} - -/* Return the state of the blinking DPT LED's */ -u_int8_t -dpt_blinking_led(dpt_softc_t * dpt) -{ - int ndx; - u_int32_t state; - u_int32_t previous; - u_int8_t result; - - mtx_assert(&dpt->lock, MA_OWNED); - result = 0; - - for (ndx = 0, state = 0, previous = 0; - (ndx < 10) && (state != previous); - ndx++) { - previous = state; - state = dpt_inl(dpt, 1); - } - - if ((state == previous) && (state == DPT_BLINK_INDICATOR)) - result = dpt_inb(dpt, 5); - - return (result); -} - -/* - * Execute a command which did not come from the kernel's SCSI layer. - * The only way to map user commands to bus and target is to comply with the - * standard DPT wire-down scheme: - */ -int -dpt_user_cmd(dpt_softc_t * dpt, eata_pt_t * user_cmd, - caddr_t cmdarg, int minor_no) -{ - dpt_ccb_t *ccb; - void *data; - int channel, target, lun; - int huh; - int result; - int submitted; - - mtx_assert(&dpt->lock, MA_OWNED); - data = NULL; - channel = minor2hba(minor_no); - target = minor2target(minor_no); - lun = minor2lun(minor_no); - - if ((channel > (dpt->channels - 1)) - || (target > dpt->max_id) - || (lun > dpt->max_lun)) - return (ENXIO); - - if (target == dpt->sc_scsi_link[channel].adapter_targ) { - /* This one is for the controller itself */ - if ((user_cmd->eataID[0] != 'E') - || (user_cmd->eataID[1] != 'A') - || (user_cmd->eataID[2] != 'T') - || (user_cmd->eataID[3] != 'A')) { - return (ENXIO); - } - } - /* Get a DPT CCB, so we can prepare a command */ - - /* Process the free list */ - if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) { - device_printf(dpt->dev, - "ERROR: Cannot allocate any more free CCB's.\n" - " Please try later\n"); - return (EFAULT); - } - /* Now grab the newest CCB */ - if ((ccb = dpt_Qpop_free(dpt)) == NULL) { - panic("%s: Got a NULL CCB from pop_free()\n", - device_get_nameunit(dpt->dev)); - } else { - /* Clean up the leftover of the previous tenant */ - ccb->status = DPT_CCB_STATE_NEW; - } - - bcopy((caddr_t) & user_cmd->command_packet, (caddr_t) & ccb->eata_ccb, - sizeof(eata_ccb_t)); - - /* We do not want to do user specified scatter/gather. Why?? */ - if (ccb->eata_ccb.scatter == 1) - return (EINVAL); - - ccb->eata_ccb.Auto_Req_Sen = 1; - ccb->eata_ccb.reqlen = htonl(sizeof(struct scsi_sense_data)); - ccb->eata_ccb.cp_datalen = htonl(sizeof(ccb->eata_ccb.cp_datalen)); - ccb->eata_ccb.cp_dataDMA = htonl(vtophys(ccb->eata_ccb.cp_dataDMA)); - ccb->eata_ccb.cp_statDMA = htonl(vtophys(&ccb->eata_ccb.cp_statDMA)); - ccb->eata_ccb.cp_reqDMA = htonl(vtophys(&ccb->eata_ccb.cp_reqDMA)); - ccb->eata_ccb.cp_viraddr = (u_int32_t) & ccb; - - if (ccb->eata_ccb.DataIn || ccb->eata_ccb.DataOut) { - /* Data I/O is involved in this command. Alocate buffer */ - if (ccb->eata_ccb.cp_datalen > PAGE_SIZE) { - data = contigmalloc(ccb->eata_ccb.cp_datalen, - M_TEMP, M_WAITOK, 0, ~0, - ccb->eata_ccb.cp_datalen, - 0x10000); - } else { - data = malloc(ccb->eata_ccb.cp_datalen, M_TEMP, - M_WAITOK); - } - - if (data == NULL) { - device_printf(dpt->dev, "Cannot allocate %d bytes " - "for EATA command\n", - ccb->eata_ccb.cp_datalen); - return (EFAULT); - } -#define usr_cmd_DMA (caddr_t)user_cmd->command_packet.cp_dataDMA - if (ccb->eata_ccb.DataIn == 1) { - if (copyin(usr_cmd_DMA, - data, ccb->eata_ccb.cp_datalen) == -1) - return (EFAULT); - } - } else { - /* No data I/O involved here. Make sure the DPT knows that */ - ccb->eata_ccb.cp_datalen = 0; - data = NULL; - } - - if (ccb->eata_ccb.FWNEST == 1) - ccb->eata_ccb.FWNEST = 0; - - if (ccb->eata_ccb.cp_datalen != 0) { - if (dpt_scatter_gather(dpt, ccb, ccb->eata_ccb.cp_datalen, - data) != 0) { - if (data != NULL) - free(data, M_TEMP); - return (EFAULT); - } - } - /** - * We are required to quiet a SCSI bus. - * since we do not queue comands on a bus basis, - * we wait for ALL commands on a controller to complete. - * In the mean time, sched_queue() will not schedule new commands. - */ - if ((ccb->eata_ccb.cp_cdb[0] == MULTIFUNCTION_CMD) - && (ccb->eata_ccb.cp_cdb[2] == BUS_QUIET)) { - /* We wait for ALL traffic for this HBa to subside */ - dpt->state |= DPT_HA_QUIET; - - while ((submitted = dpt->submitted_ccbs_count) != 0) { - huh = mtx_sleep((void *) dpt, &dpt->lock, - PCATCH | PRIBIO, "dptqt", 100 * hz); - switch (huh) { - case 0: - /* Wakeup call received */ - break; - case EWOULDBLOCK: - /* Timer Expired */ - break; - default: - /* anything else */ - break; - } - } - } - /* Resume normal operation */ - if ((ccb->eata_ccb.cp_cdb[0] == MULTIFUNCTION_CMD) - && (ccb->eata_ccb.cp_cdb[2] == BUS_UNQUIET)) { - dpt->state &= ~DPT_HA_QUIET; - } - /** - * Schedule the command and submit it. - * We bypass dpt_sched_queue, as it will block on DPT_HA_QUIET - */ - ccb->xs = NULL; - ccb->flags = 0; - ccb->eata_ccb.Auto_Req_Sen = 1; /* We always want this feature */ - - ccb->transaction_id = ++dpt->commands_processed; - ccb->std_callback = (ccb_callback) dpt_user_cmd_done; - ccb->result = (u_int32_t) & cmdarg; - ccb->data = data; - -#ifdef DPT_MEASURE_PERFORMANCE - ++dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd]; - ccb->command_started = microtime_now; -#endif - dpt_Qadd_waiting(dpt, ccb); - - dpt_sched_queue(dpt); - - /* Wait for the command to complete */ - (void) mtx_sleep((void *) ccb, &dpt->lock, PCATCH | PRIBIO, "dptucw", - 100 * hz); - - /* Free allocated memory */ - if (data != NULL) - free(data, M_TEMP); - - return (0); -} - -static void -dpt_user_cmd_done(dpt_softc_t * dpt, int bus, dpt_ccb_t * ccb) -{ - u_int32_t result; - caddr_t cmd_arg; - - mtx_unlock(&dpt->lock); - - /** - * If Auto Request Sense is on, copyout the sense struct - */ -#define usr_pckt_DMA (caddr_t)(intptr_t)ntohl(ccb->eata_ccb.cp_reqDMA) -#define usr_pckt_len ntohl(ccb->eata_ccb.cp_datalen) - if (ccb->eata_ccb.Auto_Req_Sen == 1) { - if (copyout((caddr_t) & ccb->sense_data, usr_pckt_DMA, - sizeof(struct scsi_sense_data))) { - mtx_lock(&dpt->lock); - ccb->result = EFAULT; - dpt_Qpush_free(dpt, ccb); - wakeup(ccb); - return; - } - } - /* If DataIn is on, copyout the data */ - if ((ccb->eata_ccb.DataIn == 1) - && (ccb->status_packet.hba_stat == HA_NO_ERROR)) { - if (copyout(ccb->data, usr_pckt_DMA, usr_pckt_len)) { - mtx_lock(&dpt->lock); - dpt_Qpush_free(dpt, ccb); - ccb->result = EFAULT; - - wakeup(ccb); - return; - } - } - /* Copyout the status */ - result = ccb->status_packet.hba_stat; - cmd_arg = (caddr_t) ccb->result; - - if (copyout((caddr_t) & result, cmd_arg, sizeof(result))) { - mtx_lock(&dpt->lock); - dpt_Qpush_free(dpt, ccb); - ccb->result = EFAULT; - wakeup(ccb); - return; - } - mtx_lock(&dpt->lock); - /* Put the CCB back in the freelist */ - ccb->state |= DPT_CCB_STATE_COMPLETED; - dpt_Qpush_free(dpt, ccb); - - /* Free allocated memory */ - return; -} - -#endif Property changes on: head/sys/dev/dpt/dpt_scsi.c ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/i386/conf/GENERIC =================================================================== --- head/sys/i386/conf/GENERIC (revision 339568) +++ head/sys/i386/conf/GENERIC (revision 339569) @@ -1,369 +1,368 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET options INET # InterNETworking options INET6 # IPv6 communications protocols options IPSEC # IP (v4/v6) security options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 options TCP_HHOOK # hhook(9) framework for TCP options TCP_OFFLOAD # TCP offload options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_RAID # Soft RAID functionality. options GEOM_LABEL # Provides labelization options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options COMPAT_FREEBSD9 # Compatible with FreeBSD9 options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options COMPAT_FREEBSD11 # Compatible with FreeBSD11 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options CAPABILITY_MODE # Capsicum capability mode options CAPABILITIES # Capsicum capabilities options MAC # TrustedBSD MAC Framework options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # Kernel ELF linker loads CTF data options INCLUDE_CONFIG_FILE # Include this file in kernel options RACCT # Resource accounting framework options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default options RCTL # Resource limits # Debugging support. Always need this: options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): options DDB # Support DDB. options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # Kernel dump features. options EKCD # Support for encrypted kernel dumps options GZIO # gzip-compressed kernel and user dumps options ZSTDIO # zstd-compressed kernel and user dumps options NETDUMP # netdump(4) client support # To make an SMP kernel, the next two lines are needed options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC options EARLY_AP_STARTUP # CPU frequency control device cpufreq # Bus support. device acpi device pci options PCI_HP # PCI-Express native HotPlug options PCI_IOV # PCI SR-IOV support # Floppy drives device fdc # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices device esp # AMD Am53C974 (Tekram DC-390(T)) device hptiop # Highpoint RocketRaid 3xxx series device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module device mpt # LSI-Logic MPT-Fusion device mps # LSI-Logic MPT-Fusion 2 device mpr # LSI-Logic MPT-Fusion 3 #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device isci # Intel C600 SAS controller # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # RAID controllers interfaced to the SCSI subsystem device amr # AMI MegaRAID device arcmsr # Areca SATA II RAID device ciss # Compaq Smart RAID 5* -device dpt # DPT Smartcache III, IV - See NOTES for options device hptmv # Highpoint RocketRAID 182x device hptnr # Highpoint DC7280, R750 device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx device hpt27xx # Highpoint RocketRAID 27xx device iir # Intel Integrated RAID device ips # IBM (Adaptec) ServeRAID device mly # Mylex AcceleRAID/eXtremeRAID device twa # 3ware 9000 series PATA/SATA RAID device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device aacraid # Adaptec by PMC RAID device ida # Compaq Smart RAID device mfi # LSI MegaRAID SAS device mlx # Mylex DAC960 family device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s device pmspcv # PMC-Sierra SAS/SATA Controller driver device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # NVM Express (NVMe) support device nvme # base NVMe driver device nvd # expose NVMe namespace as disks, depends on nvme # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver options VESA # Add support for VESA BIOS Extensions (VBE) device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc options SC_PIXEL_MODE # add support for the raster text mode # vt is the new video console driver device vt device vt_vga device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device #device vpo # Requires scbus and da device puc # Multi I/O cards and multi-channel UARTs # PCI Ethernet NICs. device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 Gigabit Ethernet Family device le # AMD Am7900 LANCE and Am79C9xx PCnet device ti # Alteon Networks Tigon I/II gigabit Ethernet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device ae # Attansic/Atheros L2 FastEthernet device age # Attansic/Atheros L1 Gigabit Ethernet device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) device gem # Sun GEM/Sun ERI/Apple GMAC device hme # Sun HME (Happy Meal Ethernet) device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device nfe # nVidia nForce MCP on-board Ethernet device nge # NatSemi DP83820 gigabit Ethernet device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sge # Silicon Integrated Systems SiS190/191 device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device stge # Sundance/Tamarack TC9021 gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit Ethernet device vr # VIA Rhine, Rhine II device vte # DM&P Vortex86 RDC R6040 Fast Ethernet device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device sn # SMC's 9000 series of Ethernet chips device xe # Xircom pccard Ethernet # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG # enable debug msgs options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's options IEEE80211_SUPPORT_MESH # enable 802.11s draft support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device an # Aironet 4500/4800 802.11 wireless NICs. device ath # Atheros NICs device ath_pci # Atheros pci/cardbus glue device ath_hal # pci/cardbus chip support options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later device ath_rate_sample # SampleRate tx rate control for ath #device bwi # Broadcom BCM430x/BCM431x wireless NICs. #device bwn # Broadcom BCM43xx wireless NICs. device ipw # Intel 2100 wireless NICs. device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. device iwn # Intel 4965/1000/5000/6000 wireless NICs. device malo # Marvell Libertas wireless NICs. device mwl # Marvell 88W8363 802.11n wireless NICs. device ral # Ralink Technology RT2500 wireless NICs. device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. device wpi # Intel 3945ABG wireless NICs. # Pseudo devices. device crypto # core crypto support device loop # Network loopback device random # Entropy device device padlock_rng # VIA Padlock RNG device rdrand_rng # Intel Bull Mountain RNG device ether # Ethernet support device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device xhci # XHCI PCI->USB interface (USB 3.0) device usb # USB Bus (required) device ukbd # Keyboard device umass # Disks/Mass storage - Requires scbus and da # Sound support device sound # Generic sound driver (required) device snd_cmi # CMedia CMI8338/CMI8738 device snd_csa # Crystal Semiconductor CS461x/428x device snd_emu10kx # Creative SoundBlaster Live! and Audigy device snd_es137x # Ensoniq AudioPCI ES137x device snd_hda # Intel High Definition Audio device snd_ich # Intel, NVidia and other ICH AC'97 Audio device snd_via8233 # VIA VT8233x Audio # MMC/SD device mmc # MMC/SD bus device mmcsd # MMC/SD memory card device sdhci # Generic PCI SD Host Controller # VirtIO support device virtio # Generic VirtIO bus (required) device virtio_pci # VirtIO PCI device device vtnet # VirtIO Ethernet device device virtio_blk # VirtIO Block device device virtio_scsi # VirtIO SCSI device device virtio_balloon # VirtIO Memory Balloon device # HyperV drivers and enchancement support device hyperv # HyperV drivers # Xen HVM Guest Optimizations # NOTE: XENHVM depends on xenpci. They must be added or removed together. options XENHVM # Xen HVM kernel infrastructure device xenpci # Xen HVM Hypervisor services driver # VMware support device vmx # VMware VMXNET3 Ethernet Index: head/sys/kern/Make.tags.inc =================================================================== --- head/sys/kern/Make.tags.inc (revision 339568) +++ head/sys/kern/Make.tags.inc (revision 339569) @@ -1,99 +1,97 @@ # $FreeBSD$ # @(#)Make.tags.inc 8.1 (Berkeley) 6/11/93 SYS?= ${.CURDIR}/.. # Common files for "make tags", included by the Makefile for each # architecture. # Put the /sys/sys include files at the end so that subroutine definitions # win when there is a struct tag with the same name (e.g., vmmeter). The # better solution would be for ctags to generate "struct vmmeter" tags. COMM= ${SYS}/sys/vnode.h \ ${SYS}/dev/alc/*.[ch] \ - ${SYS}/dev/dpt/*.[ch] \ ${SYS}/dev/en/*.[ch] \ ${SYS}/dev/iicbus/*.[ch] \ ${SYS}/dev/isp/*.[ch] \ ${SYS}/dev/ppbus/*.[ch] \ ${SYS}/dev/smbus/*.[ch] \ ${SYS}/dev/vx/*.[ch] \ ${SYS}/fs/autofs/*.[ch] \ ${SYS}/fs/cd9660/*.[ch] \ ${SYS}/fs/cuse/*.[ch] \ ${SYS}/fs/deadfs/*.[ch] \ ${SYS}/fs/devfs/*.[ch] \ ${SYS}/fs/ext2fs/*.[ch] \ ${SYS}/fs/fdescfs/*.[ch] \ ${SYS}/fs/fifofs/*.[ch] \ ${SYS}/fs/fuse/*.[ch] \ ${SYS}/fs/msdosfs/*.[ch] \ ${SYS}/fs/nandfs/*.[ch] \ ${SYS}/fs/nfs/*.[ch] \ ${SYS}/fs/nfsclient/*.[ch] \ ${SYS}/fs/nfsserver/*.[ch] \ ${SYS}/fs/nullfs/*.[ch] \ ${SYS}/fs/procfs/*.[ch] \ ${SYS}/fs/pseudofs/*.[ch] \ ${SYS}/fs/smbfs/*.[ch] \ ${SYS}/fs/tmpfs/*.[ch] \ ${SYS}/fs/udf/*.[ch] \ ${SYS}/fs/unionfs/*.[ch] \ ${SYS}/geom/*.[ch] \ ${SYS}/kern/*.[ch] \ ${SYS}/net/*.[ch] \ ${SYS}/netinet/*.[ch] \ ${SYS}/netinet6/*.[ch] \ ${SYS}/netipsec/*.[ch] \ ${SYS}/netnatm/*.[ch] \ ${SYS}/ddb/*.[ch] \ ${SYS}/ufs/ffs/*.[ch] \ ${SYS}/ufs/ufs/*.[ch] \ ${SYS}/vm/*.[ch] \ ${SYS}/sys/*.[ch] COMMDIR1= ${SYS}/conf \ ${SYS}/geom \ ${SYS}/kern \ ${SYS}/net \ ${SYS}/netinet \ ${SYS}/netinet6 \ ${SYS}/netipsec \ ${SYS}/netnatm \ ${SYS}/ddb \ ${SYS}/vm \ ${SYS}/sys COMMDIR2= ${SYS}/dev/alc \ - ${SYS}/dev/dpt \ ${SYS}/dev/en \ ${SYS}/dev/iicbus \ ${SYS}/dev/isp \ ${SYS}/dev/md \ ${SYS}/dev/ppbus \ ${SYS}/dev/smbus \ ${SYS}/dev/vx \ ${SYS}/fs/autofs \ ${SYS}/fs/cd9660 \ ${SYS}/fs/cuse \ ${SYS}/fs/deadfs \ ${SYS}/fs/devfs \ ${SYS}/fs/ext2fs \ ${SYS}/fs/fdescfs \ ${SYS}/fs/fifofs \ ${SYS}/fs/fuse \ ${SYS}/fs/msdosfs \ ${SYS}/fs/nandfs \ ${SYS}/fs/nfs \ ${SYS}/fs/nfsclient \ ${SYS}/fs/nfsserver \ ${SYS}/fs/nullfs \ ${SYS}/fs/procfs \ ${SYS}/fs/pseudofs \ ${SYS}/fs/smbfs \ ${SYS}/fs/tmpfs \ ${SYS}/fs/udf \ ${SYS}/fs/unionfs \ ${SYS}/ufs/ffs \ ${SYS}/ufs/ufs Index: head/sys/modules/Makefile =================================================================== --- head/sys/modules/Makefile (revision 339568) +++ head/sys/modules/Makefile (revision 339569) @@ -1,850 +1,848 @@ # $FreeBSD$ SYSDIR?=${SRCTOP}/sys .include "${SYSDIR}/conf/kern.opts.mk" SUBDIR_PARALLEL= # Modules that include binary-only blobs of microcode should be selectable by # MK_SOURCELESS_UCODE option (see below). .if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES) SUBDIR=${MODULES_OVERRIDE} .else SUBDIR= \ ${_3dfx} \ ${_3dfx_linux} \ ${_aac} \ ${_aacraid} \ accf_data \ accf_dns \ accf_http \ acl_nfs4 \ acl_posix1e \ ${_acpi} \ ae \ ${_aesni} \ age \ ${_agp} \ ahci \ aic7xxx \ alc \ ale \ alq \ ${_amd_ecc_inject} \ ${_amdgpio} \ ${_amdsbwd} \ ${_amdsmn} \ ${_amdtemp} \ amr \ ${_an} \ ${_aout} \ ${_apm} \ ${_arcmsr} \ ${_allwinner} \ ${_armv8crypto} \ ${_asmc} \ ata \ ath \ ath_dfs \ ath_hal \ ath_hal_ar5210 \ ath_hal_ar5211 \ ath_hal_ar5212 \ ath_hal_ar5416 \ ath_hal_ar9300 \ ath_main \ ath_rate \ ath_pci \ ${_autofs} \ ${_auxio} \ ${_bce} \ ${_bcm283x_clkman} \ ${_bcm283x_pwm} \ bfe \ bge \ bhnd \ ${_bxe} \ ${_bios} \ ${_bktr} \ ${_blake2} \ ${_bm} \ bnxt \ bridgestp \ bwi \ bwn \ ${_bytgpio} \ ${_chvgpio} \ cam \ ${_cardbus} \ ${_carp} \ cas \ ${_cbb} \ cc \ ${_ccp} \ cd9660 \ cd9660_iconv \ ${_ce} \ ${_cfi} \ ${_chromebook_platform} \ ${_ciss} \ cloudabi \ ${_cloudabi32} \ ${_cloudabi64} \ ${_cmx} \ ${_coff} \ ${_coretemp} \ ${_cp} \ ${_cpsw} \ ${_cpuctl} \ ${_cpufreq} \ ${_crypto} \ ${_cryptodev} \ ${_cs} \ ${_ctau} \ ctl \ ${_cxgb} \ ${_cxgbe} \ dc \ dcons \ dcons_crom \ de \ ${_dpms} \ - ${_dpt} \ ${_drm} \ ${_drm2} \ dummynet \ ${_ed} \ ${_efirt} \ ${_em} \ ${_ena} \ ${_ep} \ ${_epic} \ esp \ ${_et} \ evdev \ ${_ex} \ ${_exca} \ ext2fs \ fdc \ fdescfs \ ${_fe} \ ${_ffec} \ filemon \ firewire \ firmware \ fuse \ ${_fxp} \ gem \ geom \ ${_glxiic} \ ${_glxsb} \ gpio \ hifn \ hme \ ${_hpt27xx} \ ${_hptiop} \ ${_hptmv} \ ${_hptnr} \ ${_hptrr} \ hwpmc \ ${_hwpmc_mips24k} \ ${_hwpmc_mips74k} \ ${_hyperv} \ i2c \ ${_iavf} \ ${_ibcore} \ ${_ibcs2} \ ${_ichwd} \ ${_ida} \ if_bridge \ if_disc \ if_edsc \ ${_if_enc} \ if_epair \ ${_if_gif} \ ${_if_gre} \ ${_if_me} \ if_lagg \ ${_if_ndis} \ ${_if_stf} \ if_tap \ if_tun \ if_vlan \ if_vxlan \ ${_iir} \ imgact_binmisc \ ${_intelspi} \ ${_io} \ ${_ioat} \ ${_ipoib} \ ${_ipdivert} \ ${_ipfilter} \ ${_ipfw} \ ipfw_nat \ ${_ipfw_nat64} \ ${_ipfw_nptv6} \ ${_ipfw_pmod} \ ${_ipmi} \ ip6_mroute_mod \ ip_mroute_mod \ ${_ips} \ ${_ipsec} \ ${_ipw} \ ${_ipwfw} \ ${_isci} \ ${_iser} \ isp \ ${_ispfw} \ ${_iwi} \ ${_iwifw} \ ${_iwm} \ ${_iwmfw} \ ${_iwn} \ ${_iwnfw} \ ${_ix} \ ${_ixv} \ ${_ixl} \ jme \ kbdmux \ kgssapi \ kgssapi_krb5 \ khelp \ krpc \ ksyms \ le \ lge \ libalias \ libiconv \ libmchain \ ${_linux} \ ${_linux_common} \ ${_linux64} \ linuxkpi \ ${_lio} \ lpt \ mac_biba \ mac_bsdextended \ mac_ifoff \ mac_lomac \ mac_mls \ mac_none \ mac_ntpd \ mac_partition \ mac_portacl \ mac_seeotheruids \ mac_stub \ mac_test \ malo \ md \ mdio \ mem \ mfi \ mii \ mlx \ ${_mlx4} \ ${_mlx4ib} \ ${_mlx4en} \ ${_mlx5} \ ${_mlx5en} \ ${_mlx5ib} \ ${_mly} \ mmc \ mmcsd \ mpr \ mps \ mpt \ mqueue \ mrsas \ msdosfs \ msdosfs_iconv \ msk \ ${_mthca} \ mvs \ mwl \ ${_mwlfw} \ mxge \ my \ ${_nandfs} \ ${_nandsim} \ ${_ncr} \ ${_nctgpio} \ ${_ncv} \ ${_ndis} \ ${_netgraph} \ ${_nfe} \ nfscl \ nfscommon \ nfsd \ nfslock \ nfslockd \ nfssvc \ nge \ nmdm \ ${_nsp} \ nullfs \ ${_ntb} \ ${_nvd} \ ${_nvdimm} \ ${_nvme} \ ${_nvram} \ oce \ ${_ocs_fc} \ otus \ ${_otusfw} \ ow \ ${_padlock} \ ${_padlock_rng} \ ${_pccard} \ ${_pcfclock} \ pcn \ ${_pf} \ ${_pflog} \ ${_pfsync} \ plip \ ${_pms} \ ppbus \ ppc \ ppi \ pps \ procfs \ proto \ pseudofs \ ${_pst} \ pty \ puc \ ${_qlxge} \ ${_qlxgb} \ ${_qlxgbe} \ ${_qlnx} \ ral \ ${_ralfw} \ ${_random_fortuna} \ ${_random_other} \ rc4 \ ${_rdma} \ ${_rdrand_rng} \ re \ rl \ ${_rockchip} \ rtwn \ rtwn_pci \ rtwn_usb \ ${_rtwnfw} \ ${_s3} \ ${_safe} \ ${_sbni} \ scc \ ${_scsi_low} \ sdhci \ ${_sdhci_acpi} \ sdhci_pci \ sem \ send \ ${_sf} \ ${_sfxge} \ sge \ ${_sgx} \ ${_sgx_linux} \ siftr \ siis \ sis \ sk \ ${_smartpqi} \ smbfs \ sn \ snp \ sound \ ${_speaker} \ spi \ ${_splash} \ ${_sppp} \ ste \ ${_stg} \ stge \ ${_sym} \ ${_syscons} \ sysvipc \ tcp \ ${_ti} \ tl \ tmpfs \ ${_toecore} \ ${_tpm} \ trm \ ${_twa} \ twe \ tws \ tx \ ${_txp} \ uart \ ubsec \ udf \ udf_iconv \ ufs \ uinput \ unionfs \ usb \ ${_vesa} \ ${_virtio} \ vge \ ${_viawd} \ videomode \ vkbd \ ${_vmm} \ ${_vmware} \ ${_vpo} \ vr \ vte \ vx \ wb \ ${_wbwd} \ ${_wi} \ wlan \ wlan_acl \ wlan_amrr \ wlan_ccmp \ wlan_rssadapt \ wlan_tkip \ wlan_wep \ wlan_xauth \ ${_wpi} \ ${_wpifw} \ ${_x86bios} \ ${_xe} \ xl \ zlib .if ${MK_AUTOFS} != "no" || defined(ALL_MODULES) _autofs= autofs .endif .if ${MK_CDDL} != "no" || defined(ALL_MODULES) .if (${MACHINE_CPUARCH} != "arm" || ${MACHINE_ARCH:Marmv[67]*} != "") && \ ${MACHINE_CPUARCH} != "mips" && \ ${MACHINE_CPUARCH} != "sparc64" SUBDIR+= dtrace .endif SUBDIR+= opensolaris .endif .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) .if exists(${SRCTOP}/sys/opencrypto) _crypto= crypto _cryptodev= cryptodev _random_fortuna=random_fortuna _random_other= random_other .endif .endif .if ${MK_CUSE} != "no" || defined(ALL_MODULES) SUBDIR+= cuse .endif .if (${MK_INET_SUPPORT} != "no" || ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _carp= carp _toecore= toecore _if_enc= if_enc _if_gif= if_gif _if_gre= if_gre _ipfw_pmod= ipfw_pmod .if ${MK_IPSEC_SUPPORT} != "no" _ipsec= ipsec .endif .endif .if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _if_stf= if_stf .endif .if ${MK_INET_SUPPORT} != "no" || defined(ALL_MODULES) _if_me= if_me _ipdivert= ipdivert _ipfw= ipfw .if ${MK_INET6_SUPPORT} != "no" || defined(ALL_MODULES) _ipfw_nat64= ipfw_nat64 .endif .endif .if ${MK_INET6_SUPPORT} != "no" || defined(ALL_MODULES) _ipfw_nptv6= ipfw_nptv6 .endif .if ${MK_IPFILTER} != "no" || defined(ALL_MODULES) _ipfilter= ipfilter .endif .if ${MK_ISCSI} != "no" || defined(ALL_MODULES) SUBDIR+= cfiscsi SUBDIR+= iscsi SUBDIR+= iscsi_initiator .endif .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" || \ ${MACHINE_CPUARCH} == "i386" SUBDIR+= linprocfs SUBDIR+= linsysfs .endif .if ${MK_NAND} != "no" || defined(ALL_MODULES) _nandfs= nandfs _nandsim= nandsim .endif .if ${MK_NETGRAPH} != "no" || defined(ALL_MODULES) _netgraph= netgraph .endif .if (${MK_PF} != "no" && (${MK_INET_SUPPORT} != "no" || \ ${MK_INET6_SUPPORT} != "no")) || defined(ALL_MODULES) _pf= pf _pflog= pflog .if ${MK_INET_SUPPORT} != "no" _pfsync= pfsync .endif .endif .if ${MK_SOURCELESS_UCODE} != "no" _bce= bce _fxp= fxp _ispfw= ispfw _sf= sf _ti= ti _txp= txp .if ${MACHINE_CPUARCH} != "mips" _mwlfw= mwlfw _otusfw= otusfw _ralfw= ralfw _rtwnfw= rtwnfw .endif .endif .if ${MK_SOURCELESS_UCODE} != "no" && ${MACHINE_CPUARCH} != "arm" && \ ${MACHINE_CPUARCH} != "mips" && \ ${MACHINE_ARCH} != "powerpc" && ${MACHINE_ARCH} != "powerpcspe" && \ ${MACHINE_CPUARCH} != "riscv" _cxgbe= cxgbe .endif .if ${MK_TESTS} != "no" || defined(ALL_MODULES) SUBDIR+= tests .endif .if ${MK_ZFS} != "no" || defined(ALL_MODULES) SUBDIR+= zfs .endif .if (${MACHINE_CPUARCH} == "mips" && ${MACHINE_ARCH:Mmips64} == "") _hwpmc_mips24k= hwpmc_mips24k _hwpmc_mips74k= hwpmc_mips74k .endif .if ${MACHINE_CPUARCH} != "aarch64" && ${MACHINE_CPUARCH} != "arm" && \ ${MACHINE_CPUARCH} != "mips" && ${MACHINE_CPUARCH} != "powerpc" && \ ${MACHINE_CPUARCH} != "riscv" _syscons= syscons _vpo= vpo .endif .if ${MACHINE_CPUARCH} != "mips" # no BUS_SPACE_UNSPECIFIED # No barrier instruction support (specific to this driver) _sym= sym # intr_disable() is a macro, causes problems .if ${MK_SOURCELESS_UCODE} != "no" _cxgb= cxgb .endif .endif .if ${MACHINE_CPUARCH} == "aarch64" _allwinner= allwinner _armv8crypto= armv8crypto _efirt= efirt _em= em _rockchip= rockchip .endif .if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64" _agp= agp _an= an _aout= aout _bios= bios _bktr= bktr .if ${MK_SOURCELESS_UCODE} != "no" _bxe= bxe .endif _cardbus= cardbus _cbb= cbb _cpuctl= cpuctl _cpufreq= cpufreq _cs= cs _dpms= dpms .if ${MK_MODULE_DRM} != "no" _drm= drm .endif .if ${MK_MODULE_DRM2} != "no" _drm2= drm2 .endif _ed= ed _em= em _ena= ena _ep= ep _et= et _exca= exca _fe= fe .if ${MK_OFED} != "no" || defined(ALL_MODULES) _ibcore= ibcore .endif _if_ndis= if_ndis _io= io .if ${MK_OFED} != "no" || defined(ALL_MODULES) _ipoib= ipoib _iser= iser .endif _ix= ix _ixv= ixv _linux= linux .if ${MK_SOURCELESS_UCODE} != "no" _lio= lio .endif _nctgpio= nctgpio _ndis= ndis _ocs_fc= ocs_fc _pccard= pccard .if ${MK_OFED} != "no" || defined(ALL_MODULES) _rdma= rdma .endif _safe= safe _scsi_low= scsi_low _speaker= speaker _splash= splash _sppp= sppp _vmware= vmware _wbwd= wbwd _wi= wi _xe= xe _aac= aac _aacraid= aacraid _acpi= acpi .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) .if ${COMPILER_TYPE} != "gcc" || ${COMPILER_VERSION} > 40201 _aesni= aesni .endif .endif _amd_ecc_inject=amd_ecc_inject _amdsbwd= amdsbwd _amdsmn= amdsmn _amdtemp= amdtemp _arcmsr= arcmsr _asmc= asmc .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _blake2= blake2 .endif _bytgpio= bytgpio _chvgpio= chvgpio _ciss= ciss _chromebook_platform= chromebook_platform _cmx= cmx _coretemp= coretemp .if ${MK_SOURCELESS_HOST} != "no" _hpt27xx= hpt27xx .endif _hptiop= hptiop .if ${MK_SOURCELESS_HOST} != "no" _hptmv= hptmv _hptnr= hptnr _hptrr= hptrr .endif _hyperv= hyperv _ichwd= ichwd _ida= ida _iir= iir _intelspi= intelspi _ipmi= ipmi _ips= ips _isci= isci _ipw= ipw _iwi= iwi _iwm= iwm _iwn= iwn .if ${MK_SOURCELESS_UCODE} != "no" _ipwfw= ipwfw _iwifw= iwifw _iwmfw= iwmfw _iwnfw= iwnfw .endif _mlx4= mlx4 _mlx5= mlx5 .if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _mlx4en= mlx4en _mlx5en= mlx5en .endif .if ${MK_OFED} != "no" || defined(ALL_MODULES) _mthca= mthca _mlx4ib= mlx4ib _mlx5ib= mlx5ib .endif _mly= mly _nfe= nfe _nvd= nvd _nvme= nvme _nvram= nvram .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _padlock= padlock _padlock_rng= padlock_rng _rdrand_rng= rdrand_rng .endif _s3= s3 _sdhci_acpi= sdhci_acpi _tpm= tpm _twa= twa _vesa= vesa _viawd= viawd _virtio= virtio _wpi= wpi .if ${MK_SOURCELESS_UCODE} != "no" _wpifw= wpifw .endif _x86bios= x86bios .endif .if ${MACHINE_CPUARCH} == "amd64" _amdgpio= amdgpio _ccp= ccp _efirt= efirt _iavf= iavf _ioat= ioat _ixl= ixl _linux64= linux64 _linux_common= linux_common _ntb= ntb _nvdimm= nvdimm _pms= pms _qlxge= qlxge _qlxgb= qlxgb .if ${MK_SOURCELESS_UCODE} != "no" _qlxgbe= qlxgbe _qlnx= qlnx .endif _sfxge= sfxge _sgx= sgx _sgx_linux= sgx_linux _smartpqi= smartpqi .if ${MK_BHYVE} != "no" || defined(ALL_MODULES) _vmm= vmm .endif .endif .if ${MACHINE_CPUARCH} == "i386" # XXX some of these can move to the general case when de-i386'ed # XXX some of these can move now, but are untested on other architectures. _3dfx= 3dfx _3dfx_linux= 3dfx_linux _apm= apm .if ${MK_SOURCELESS_UCODE} != "no" _ce= ce .endif _coff= coff .if ${MK_SOURCELESS_UCODE} != "no" _cp= cp .endif _glxiic= glxiic _glxsb= glxsb #_ibcs2= ibcs2 _ncr= ncr _ncv= ncv _nsp= nsp _pcfclock= pcfclock _pst= pst _sbni= sbni _stg= stg .if ${MK_SOURCELESS_UCODE} != "no" _ctau= ctau .endif -_dpt= dpt _ex= ex .endif .if ${MACHINE_CPUARCH} == "arm" _cfi= cfi _cpsw= cpsw .endif .if ${MACHINE_CPUARCH} == "powerpc" _agp= agp _an= an _bm= bm _cardbus= cardbus _cbb= cbb _cfi= cfi _cpufreq= cpufreq .if ${MK_MODULE_DRM} != "no" _drm= drm .endif _exca= exca _ffec= ffec _nvd= nvd _nvme= nvme _pccard= pccard _wi= wi .endif .if ${MACHINE_ARCH} == "powerpc64" .if ${MK_MODULE_DRM2} != "no" _drm2= drm2 .endif _ipmi= ipmi .endif .if ${MACHINE_ARCH} == "powerpc64" || ${MACHINE_ARCH} == "powerpc" # Don't build powermac_nvram for powerpcspe, it's never supported. _nvram= powermac_nvram .endif .if ${MACHINE_CPUARCH} == "sparc64" _auxio= auxio _em= em _epic= epic .endif .if (${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" || \ ${MACHINE_ARCH:Marmv[67]*} != "" || ${MACHINE_CPUARCH} == "i386") _cloudabi32= cloudabi32 .endif .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" _cloudabi64= cloudabi64 .endif .endif .if ${MACHINE_ARCH:Marmv[67]*} != "" || ${MACHINE_CPUARCH} == "aarch64" _bcm283x_clkman= bcm283x_clkman _bcm283x_pwm= bcm283x_pwm .endif SUBDIR+=${MODULES_EXTRA} .for reject in ${WITHOUT_MODULES} SUBDIR:= ${SUBDIR:N${reject}} .endfor # Calling kldxref(8) for each module is expensive. .if !defined(NO_XREF) .MAKEFLAGS+= -DNO_XREF afterinstall: .PHONY @if type kldxref >/dev/null 2>&1; then \ ${ECHO} kldxref ${DESTDIR}${KMODDIR}; \ kldxref ${DESTDIR}${KMODDIR}; \ fi .endif .include "${SYSDIR}/conf/config.mk" SUBDIR:= ${SUBDIR:u:O} .include Index: head/sys/modules/dpt/Makefile =================================================================== --- head/sys/modules/dpt/Makefile (revision 339568) +++ head/sys/modules/dpt/Makefile (nonexistent) @@ -1,14 +0,0 @@ -# $FreeBSD$ - -SYSDIR?=${SRCTOP}/sys -.include "${SYSDIR}/conf/kern.opts.mk" - -.PATH: ${SYSDIR}/dev/dpt -KMOD= dpt -SRCS= dpt_scsi.c dpt.h \ - dpt_pci.c pci_if.h \ - opt_dpt.h \ - opt_cam.h opt_scsi.h \ - device_if.h bus_if.h - -.include Property changes on: head/sys/modules/dpt/Makefile ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property