Index: head/sys/netinet/in_pcb.h =================================================================== --- head/sys/netinet/in_pcb.h (revision 338508) +++ head/sys/netinet/in_pcb.h (revision 338509) @@ -1,893 +1,893 @@ /*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 1982, 1986, 1990, 1993 * The Regents of the University of California. * Copyright (c) 2010-2011 Juniper Networks, Inc. * All rights reserved. * * Portions of this software were developed by Robert N. M. Watson under * contract to Juniper Networks, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)in_pcb.h 8.1 (Berkeley) 6/10/93 * $FreeBSD$ */ #ifndef _NETINET_IN_PCB_H_ #define _NETINET_IN_PCB_H_ #include #include #include #include #include #include #ifdef _KERNEL #include #include #include #include #include #include #endif #include #define in6pcb inpcb /* for KAME src sync over BSD*'s */ #define in6p_sp inp_sp /* for KAME src sync over BSD*'s */ /* * struct inpcb is the common protocol control block structure used in most * IP transport protocols. * * Pointers to local and foreign host table entries, local and foreign socket * numbers, and pointers up (to a socket structure) and down (to a * protocol-specific control block) are stored here. */ CK_LIST_HEAD(inpcbhead, inpcb); CK_LIST_HEAD(inpcbporthead, inpcbport); typedef uint64_t inp_gen_t; /* * PCB with AF_INET6 null bind'ed laddr can receive AF_INET input packet. * So, AF_INET6 null laddr is also used as AF_INET null laddr, by utilizing * the following structure. */ struct in_addr_4in6 { u_int32_t ia46_pad32[3]; struct in_addr ia46_addr4; }; union in_dependaddr { struct in_addr_4in6 id46_addr; struct in6_addr id6_addr; }; /* * NOTE: ipv6 addrs should be 64-bit aligned, per RFC 2553. in_conninfo has * some extra padding to accomplish this. * NOTE 2: tcp_syncache.c uses first 5 32-bit words, which identify fport, * lport, faddr to generate hash, so these fields shouldn't be moved. */ struct in_endpoints { u_int16_t ie_fport; /* foreign port */ u_int16_t ie_lport; /* local port */ /* protocol dependent part, local and foreign addr */ union in_dependaddr ie_dependfaddr; /* foreign host table entry */ union in_dependaddr ie_dependladdr; /* local host table entry */ #define ie_faddr ie_dependfaddr.id46_addr.ia46_addr4 #define ie_laddr ie_dependladdr.id46_addr.ia46_addr4 #define ie6_faddr ie_dependfaddr.id6_addr #define ie6_laddr ie_dependladdr.id6_addr u_int32_t ie6_zoneid; /* scope zone id */ }; /* * XXX The defines for inc_* are hacks and should be changed to direct * references. */ struct in_conninfo { u_int8_t inc_flags; u_int8_t inc_len; u_int16_t inc_fibnum; /* XXX was pad, 16 bits is plenty */ /* protocol dependent part */ struct in_endpoints inc_ie; }; /* * Flags for inc_flags. */ #define INC_ISIPV6 0x01 #define INC_IPV6MINMTU 0x02 #define inc_fport inc_ie.ie_fport #define inc_lport inc_ie.ie_lport #define inc_faddr inc_ie.ie_faddr #define inc_laddr inc_ie.ie_laddr #define inc6_faddr inc_ie.ie6_faddr #define inc6_laddr inc_ie.ie6_laddr #define inc6_zoneid inc_ie.ie6_zoneid #if defined(_KERNEL) || defined(_WANT_INPCB) /* * struct inpcb captures the network layer state for TCP, UDP, and raw IPv4 and * IPv6 sockets. In the case of TCP and UDP, further per-connection state is * hung off of inp_ppcb most of the time. Almost all fields of struct inpcb * are static after creation or protected by a per-inpcb rwlock, inp_lock. A * few fields are protected by multiple locks as indicated in the locking notes * below. For these fields, all of the listed locks must be write-locked for * any modifications. However, these fields can be safely read while any one of * the listed locks are read-locked. This model can permit greater concurrency * for read operations. For example, connections can be looked up while only * holding a read lock on the global pcblist lock. This is important for * performance when attempting to find the connection for a packet given its IP * and port tuple. * * One noteworthy exception is that the global pcbinfo lock follows a different * set of rules in relation to the inp_list field. Rather than being * write-locked for modifications and read-locked for list iterations, it must * be read-locked during modifications and write-locked during list iterations. * This ensures that the relatively rare global list iterations safely walk a * stable snapshot of connections while allowing more common list modifications * to safely grab the pcblist lock just while adding or removing a connection * from the global list. * * Key: * (b) - Protected by the hpts lock. * (c) - Constant after initialization * (e) - Protected by the net_epoch_prempt epoch * (g) - Protected by the pcbgroup lock * (i) - Protected by the inpcb lock * (p) - Protected by the pcbinfo lock for the inpcb * (l) - Protected by the pcblist lock for the inpcb * (h) - Protected by the pcbhash lock for the inpcb * (s) - Protected by another subsystem's locks * (x) - Undefined locking * * Notes on the tcp_hpts: * * First Hpts lock order is * 1) INP_WLOCK() * 2) HPTS_LOCK() i.e. hpts->pmtx * * To insert a TCB on the hpts you *must* be holding the INP_WLOCK(). * You may check the inp->inp_in_hpts flag without the hpts lock. * The hpts is the only one that will clear this flag holding * only the hpts lock. This means that in your tcp_output() * routine when you test for the inp_in_hpts flag to be 1 * it may be transitioning to 0 (by the hpts). * That's ok since that will just mean an extra call to tcp_output * that most likely will find the call you executed * (when the mis-match occured) will have put the TCB back * on the hpts and it will return. If your * call did not add the inp back to the hpts then you will either * over-send or the cwnd will block you from sending more. * * Note you should also be holding the INP_WLOCK() when you * call the remove from the hpts as well. Though usually * you are either doing this from a timer, where you need and have * the INP_WLOCK() or from destroying your TCB where again * you should already have the INP_WLOCK(). * * The inp_hpts_cpu, inp_hpts_cpu_set, inp_input_cpu and * inp_input_cpu_set fields are controlled completely by * the hpts. Do not ever set these. The inp_hpts_cpu_set * and inp_input_cpu_set fields indicate if the hpts has * setup the respective cpu field. It is advised if this * field is 0, to enqueue the packet with the appropriate * hpts_immediate() call. If the _set field is 1, then * you may compare the inp_*_cpu field to the curcpu and * may want to again insert onto the hpts if these fields * are not equal (i.e. you are not on the expected CPU). * * A note on inp_hpts_calls and inp_input_calls, these * flags are set when the hpts calls either the output * or do_segment routines respectively. If the routine * being called wants to use this, then it needs to * clear the flag before returning. The hpts will not * clear the flag. The flags can be used to tell if * the hpts is the function calling the respective * routine. * * A few other notes: * * When a read lock is held, stability of the field is guaranteed; to write * to a field, a write lock must generally be held. * * netinet/netinet6-layer code should not assume that the inp_socket pointer * is safe to dereference without inp_lock being held, even for protocols * other than TCP (where the inpcb persists during TIMEWAIT even after the * socket has been freed), or there may be close(2)-related races. * * The inp_vflag field is overloaded, and would otherwise ideally be (c). * * TODO: Currently only the TCP stack is leveraging the global pcbinfo lock * read-lock usage during modification, this model can be applied to other * protocols (especially SCTP). */ struct icmp6_filter; struct inpcbpolicy; struct m_snd_tag; struct inpcb { /* Cache line #1 (amd64) */ CK_LIST_ENTRY(inpcb) inp_hash; /* [w](h/i) [r](e/i) hash list */ CK_LIST_ENTRY(inpcb) inp_pcbgrouphash; /* (g/i) hash list */ struct rwlock inp_lock; /* Cache line #2 (amd64) */ #define inp_start_zero inp_hpts #define inp_zero_size (sizeof(struct inpcb) - \ offsetof(struct inpcb, inp_start_zero)) TAILQ_ENTRY(inpcb) inp_hpts; /* pacing out queue next lock(b) */ uint32_t inp_hpts_request; /* Current hpts request, zero if * fits in the pacing window (i&b). */ /* * Note the next fields are protected by a * different lock (hpts-lock). This means that * they must correspond in size to the smallest * protectable bit field (uint8_t on x86, and * other platfomrs potentially uint32_t?). Also * since CPU switches can occur at different times the two * fields can *not* be collapsed into a signal bit field. */ #if defined(__amd64__) || defined(__i386__) volatile uint8_t inp_in_hpts; /* on output hpts (lock b) */ volatile uint8_t inp_in_input; /* on input hpts (lock b) */ #else volatile uint32_t inp_in_hpts; /* on output hpts (lock b) */ volatile uint32_t inp_in_input; /* on input hpts (lock b) */ #endif volatile uint16_t inp_hpts_cpu; /* Lock (i) */ u_int inp_refcount; /* (i) refcount */ int inp_flags; /* (i) generic IP/datagram flags */ int inp_flags2; /* (i) generic IP/datagram flags #2*/ volatile uint16_t inp_input_cpu; /* Lock (i) */ volatile uint8_t inp_hpts_cpu_set :1, /* on output hpts (i) */ inp_input_cpu_set : 1, /* on input hpts (i) */ inp_hpts_calls :1, /* (i) from output hpts */ inp_input_calls :1, /* (i) from input hpts */ inp_spare_bits2 : 4; uint8_t inp_spare_byte; /* Compiler hole */ void *inp_ppcb; /* (i) pointer to per-protocol pcb */ struct socket *inp_socket; /* (i) back pointer to socket */ uint32_t inp_hptsslot; /* Hpts wheel slot this tcb is Lock(i&b) */ uint32_t inp_hpts_drop_reas; /* reason we are dropping the PCB (lock i&b) */ TAILQ_ENTRY(inpcb) inp_input; /* pacing in queue next lock(b) */ struct inpcbinfo *inp_pcbinfo; /* (c) PCB list info */ struct inpcbgroup *inp_pcbgroup; /* (g/i) PCB group list */ CK_LIST_ENTRY(inpcb) inp_pcbgroup_wild; /* (g/i/h) group wildcard entry */ struct ucred *inp_cred; /* (c) cache of socket cred */ u_int32_t inp_flow; /* (i) IPv6 flow information */ u_char inp_vflag; /* (i) IP version flag (v4/v6) */ u_char inp_ip_ttl; /* (i) time to live proto */ u_char inp_ip_p; /* (c) protocol proto */ u_char inp_ip_minttl; /* (i) minimum TTL or drop */ uint32_t inp_flowid; /* (x) flow id / queue id */ struct m_snd_tag *inp_snd_tag; /* (i) send tag for outgoing mbufs */ uint32_t inp_flowtype; /* (x) M_HASHTYPE value */ uint32_t inp_rss_listen_bucket; /* (x) overridden RSS listen bucket */ /* Local and foreign ports, local and foreign addr. */ struct in_conninfo inp_inc; /* (i) list for PCB's local port */ /* MAC and IPSEC policy information. */ struct label *inp_label; /* (i) MAC label */ struct inpcbpolicy *inp_sp; /* (s) for IPSEC */ /* Protocol-dependent part; options. */ struct { u_char inp_ip_tos; /* (i) type of service proto */ struct mbuf *inp_options; /* (i) IP options */ struct ip_moptions *inp_moptions; /* (i) mcast options */ }; struct { /* (i) IP options */ struct mbuf *in6p_options; /* (i) IP6 options for outgoing packets */ struct ip6_pktopts *in6p_outputopts; /* (i) IP multicast options */ struct ip6_moptions *in6p_moptions; /* (i) ICMPv6 code type filter */ struct icmp6_filter *in6p_icmp6filt; /* (i) IPV6_CHECKSUM setsockopt */ int in6p_cksum; short in6p_hops; }; CK_LIST_ENTRY(inpcb) inp_portlist; /* (i/h) */ struct inpcbport *inp_phd; /* (i/h) head of this list */ inp_gen_t inp_gencnt; /* (c) generation count */ - struct llentry *inp_lle; /* cached L2 information */ + void *spare_ptr; /* Spare pointer. */ rt_gen_t inp_rt_cookie; /* generation for route entry */ union { /* cached L3 information */ struct route inp_route; struct route_in6 inp_route6; }; CK_LIST_ENTRY(inpcb) inp_list; /* (p/l) list for all PCBs for proto */ /* (e[r]) for list iteration */ /* (p[w]/l) for addition/removal */ struct epoch_context inp_epoch_ctx; }; #endif /* _KERNEL */ #define inp_fport inp_inc.inc_fport #define inp_lport inp_inc.inc_lport #define inp_faddr inp_inc.inc_faddr #define inp_laddr inp_inc.inc_laddr #define in6p_faddr inp_inc.inc6_faddr #define in6p_laddr inp_inc.inc6_laddr #define in6p_zoneid inp_inc.inc6_zoneid #define in6p_flowinfo inp_flow #define inp_vnet inp_pcbinfo->ipi_vnet /* * The range of the generation count, as used in this implementation, is 9e19. * We would have to create 300 billion connections per second for this number * to roll over in a year. This seems sufficiently unlikely that we simply * don't concern ourselves with that possibility. */ /* * Interface exported to userland by various protocols which use inpcbs. Hack * alert -- only define if struct xsocket is in scope. * Fields prefixed with "xi_" are unique to this structure, and the rest * match fields in the struct inpcb, to ease coding and porting. * * Legend: * (s) - used by userland utilities in src * (p) - used by utilities in ports * (3) - is known to be used by third party software not in ports * (n) - no known usage */ #ifdef _SYS_SOCKETVAR_H_ struct xinpcb { ksize_t xi_len; /* length of this structure */ struct xsocket xi_socket; /* (s,p) */ struct in_conninfo inp_inc; /* (s,p) */ uint64_t inp_gencnt; /* (s,p) */ kvaddr_t inp_ppcb; /* (s) netstat(1) */ int64_t inp_spare64[4]; uint32_t inp_flow; /* (s) */ uint32_t inp_flowid; /* (s) */ uint32_t inp_flowtype; /* (s) */ int32_t inp_flags; /* (s,p) */ int32_t inp_flags2; /* (s) */ int32_t inp_rss_listen_bucket; /* (n) */ int32_t in6p_cksum; /* (n) */ int32_t inp_spare32[4]; uint16_t in6p_hops; /* (n) */ uint8_t inp_ip_tos; /* (n) */ int8_t pad8; uint8_t inp_vflag; /* (s,p) */ uint8_t inp_ip_ttl; /* (n) */ uint8_t inp_ip_p; /* (n) */ uint8_t inp_ip_minttl; /* (n) */ int8_t inp_spare8[4]; } __aligned(8); struct xinpgen { ksize_t xig_len; /* length of this structure */ u_int xig_count; /* number of PCBs at this time */ uint32_t _xig_spare32; inp_gen_t xig_gen; /* generation count at this time */ so_gen_t xig_sogen; /* socket generation count this time */ uint64_t _xig_spare64[4]; } __aligned(8); #ifdef _KERNEL void in_pcbtoxinpcb(const struct inpcb *, struct xinpcb *); #endif #endif /* _SYS_SOCKETVAR_H_ */ struct inpcbport { struct epoch_context phd_epoch_ctx; CK_LIST_ENTRY(inpcbport) phd_hash; struct inpcbhead phd_pcblist; u_short phd_port; }; struct in_pcblist { int il_count; struct epoch_context il_epoch_ctx; struct inpcbinfo *il_pcbinfo; struct inpcb *il_inp_list[0]; }; /*- * Global data structure for each high-level protocol (UDP, TCP, ...) in both * IPv4 and IPv6. Holds inpcb lists and information for managing them. * * Each pcbinfo is protected by three locks: ipi_lock, ipi_hash_lock and * ipi_list_lock: * - ipi_lock covering the global pcb list stability during loop iteration, * - ipi_hash_lock covering the hashed lookup tables, * - ipi_list_lock covering mutable global fields (such as the global * pcb list) * * The lock order is: * * ipi_lock (before) * inpcb locks (before) * ipi_list locks (before) * {ipi_hash_lock, pcbgroup locks} * * Locking key: * * (c) Constant or nearly constant after initialisation * (e) - Protected by the net_epoch_prempt epoch * (g) Locked by ipi_lock * (l) Locked by ipi_list_lock * (h) Read using either net_epoch_preempt or inpcb lock; write requires both ipi_hash_lock and inpcb lock * (p) Protected by one or more pcbgroup locks * (x) Synchronisation properties poorly defined */ struct inpcbinfo { /* * Global lock protecting inpcb list modification */ struct mtx ipi_lock; /* * Global list of inpcbs on the protocol. */ struct inpcbhead *ipi_listhead; /* [r](e) [w](g/l) */ u_int ipi_count; /* (l) */ /* * Generation count -- incremented each time a connection is allocated * or freed. */ u_quad_t ipi_gencnt; /* (l) */ /* * Fields associated with port lookup and allocation. */ u_short ipi_lastport; /* (x) */ u_short ipi_lastlow; /* (x) */ u_short ipi_lasthi; /* (x) */ /* * UMA zone from which inpcbs are allocated for this protocol. */ struct uma_zone *ipi_zone; /* (c) */ /* * Connection groups associated with this protocol. These fields are * constant, but pcbgroup structures themselves are protected by * per-pcbgroup locks. */ struct inpcbgroup *ipi_pcbgroups; /* (c) */ u_int ipi_npcbgroups; /* (c) */ u_int ipi_hashfields; /* (c) */ /* * Global lock protecting modification non-pcbgroup hash lookup tables. */ struct mtx ipi_hash_lock; /* * Global hash of inpcbs, hashed by local and foreign addresses and * port numbers. */ struct inpcbhead *ipi_hashbase; /* (h) */ u_long ipi_hashmask; /* (h) */ /* * Global hash of inpcbs, hashed by only local port number. */ struct inpcbporthead *ipi_porthashbase; /* (h) */ u_long ipi_porthashmask; /* (h) */ /* * List of wildcard inpcbs for use with pcbgroups. In the past, was * per-pcbgroup but is now global. All pcbgroup locks must be held * to modify the list, so any is sufficient to read it. */ struct inpcbhead *ipi_wildbase; /* (p) */ u_long ipi_wildmask; /* (p) */ /* * Load balance groups used for the SO_REUSEPORT_LB option, * hashed by local port. */ struct inpcblbgrouphead *ipi_lbgrouphashbase; /* (h) */ u_long ipi_lbgrouphashmask; /* (h) */ /* * Pointer to network stack instance */ struct vnet *ipi_vnet; /* (c) */ /* * general use 2 */ void *ipi_pspare[2]; /* * Global lock protecting global inpcb list, inpcb count, etc. */ struct rwlock ipi_list_lock; }; #ifdef _KERNEL /* * Connection groups hold sets of connections that have similar CPU/thread * affinity. Each connection belongs to exactly one connection group. */ struct inpcbgroup { /* * Per-connection group hash of inpcbs, hashed by local and foreign * addresses and port numbers. */ struct inpcbhead *ipg_hashbase; /* (c) */ u_long ipg_hashmask; /* (c) */ /* * Notional affinity of this pcbgroup. */ u_int ipg_cpu; /* (p) */ /* * Per-connection group lock, not to be confused with ipi_lock. * Protects the hash table hung off the group, but also the global * wildcard list in inpcbinfo. */ struct mtx ipg_lock; } __aligned(CACHE_LINE_SIZE); /* * Load balance groups used for the SO_REUSEPORT_LB socket option. Each group * (or unique address:port combination) can be re-used at most * INPCBLBGROUP_SIZMAX (256) times. The inpcbs are stored in il_inp which * is dynamically resized as processes bind/unbind to that specific group. */ struct inpcblbgroup { LIST_ENTRY(inpcblbgroup) il_list; uint16_t il_lport; /* (c) */ u_char il_vflag; /* (c) */ u_char il_pad; uint32_t il_pad2; union in_dependaddr il_dependladdr; /* (c) */ #define il_laddr il_dependladdr.id46_addr.ia46_addr4 #define il6_laddr il_dependladdr.id6_addr uint32_t il_inpsiz; /* max count in il_inp[] (h) */ uint32_t il_inpcnt; /* cur count in il_inp[] (h) */ struct inpcb *il_inp[]; /* (h) */ }; LIST_HEAD(inpcblbgrouphead, inpcblbgroup); #define INP_LOCK_INIT(inp, d, t) \ rw_init_flags(&(inp)->inp_lock, (t), RW_RECURSE | RW_DUPOK) #define INP_LOCK_DESTROY(inp) rw_destroy(&(inp)->inp_lock) #define INP_RLOCK(inp) rw_rlock(&(inp)->inp_lock) #define INP_WLOCK(inp) rw_wlock(&(inp)->inp_lock) #define INP_TRY_RLOCK(inp) rw_try_rlock(&(inp)->inp_lock) #define INP_TRY_WLOCK(inp) rw_try_wlock(&(inp)->inp_lock) #define INP_RUNLOCK(inp) rw_runlock(&(inp)->inp_lock) #define INP_WUNLOCK(inp) rw_wunlock(&(inp)->inp_lock) #define INP_TRY_UPGRADE(inp) rw_try_upgrade(&(inp)->inp_lock) #define INP_DOWNGRADE(inp) rw_downgrade(&(inp)->inp_lock) #define INP_WLOCKED(inp) rw_wowned(&(inp)->inp_lock) #define INP_LOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_LOCKED) #define INP_RLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_RLOCKED) #define INP_WLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_WLOCKED) #define INP_UNLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_UNLOCKED) /* * These locking functions are for inpcb consumers outside of sys/netinet, * more specifically, they were added for the benefit of TOE drivers. The * macros are reserved for use by the stack. */ void inp_wlock(struct inpcb *); void inp_wunlock(struct inpcb *); void inp_rlock(struct inpcb *); void inp_runlock(struct inpcb *); #ifdef INVARIANT_SUPPORT void inp_lock_assert(struct inpcb *); void inp_unlock_assert(struct inpcb *); #else #define inp_lock_assert(inp) do {} while (0) #define inp_unlock_assert(inp) do {} while (0) #endif void inp_apply_all(void (*func)(struct inpcb *, void *), void *arg); int inp_ip_tos_get(const struct inpcb *inp); void inp_ip_tos_set(struct inpcb *inp, int val); struct socket * inp_inpcbtosocket(struct inpcb *inp); struct tcpcb * inp_inpcbtotcpcb(struct inpcb *inp); void inp_4tuple_get(struct inpcb *inp, uint32_t *laddr, uint16_t *lp, uint32_t *faddr, uint16_t *fp); int inp_so_options(const struct inpcb *inp); #endif /* _KERNEL */ #define INP_INFO_LOCK_INIT(ipi, d) \ mtx_init(&(ipi)->ipi_lock, (d), NULL, MTX_DEF| MTX_RECURSE) #define INP_INFO_LOCK_DESTROY(ipi) mtx_destroy(&(ipi)->ipi_lock) #define INP_INFO_RLOCK_ET(ipi, et) NET_EPOCH_ENTER_ET((et)) #define INP_INFO_WLOCK(ipi) mtx_lock(&(ipi)->ipi_lock) #define INP_INFO_TRY_WLOCK(ipi) mtx_trylock(&(ipi)->ipi_lock) #define INP_INFO_WLOCKED(ipi) mtx_owned(&(ipi)->ipi_lock) #define INP_INFO_RUNLOCK_ET(ipi, et) NET_EPOCH_EXIT_ET((et)) #define INP_INFO_RUNLOCK_TP(ipi, tp) NET_EPOCH_EXIT_ET(*(tp)->t_inpcb->inp_et) #define INP_INFO_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_lock) #define INP_INFO_LOCK_ASSERT(ipi) MPASS(in_epoch(net_epoch_preempt) || mtx_owned(&(ipi)->ipi_lock)) #define INP_INFO_RLOCK_ASSERT(ipi) MPASS(in_epoch(net_epoch_preempt)) #define INP_INFO_WLOCK_ASSERT(ipi) mtx_assert(&(ipi)->ipi_lock, MA_OWNED) #define INP_INFO_UNLOCK_ASSERT(ipi) MPASS(!in_epoch(net_epoch_preempt) && !mtx_owned(&(ipi)->ipi_lock)) #define INP_LIST_LOCK_INIT(ipi, d) \ rw_init_flags(&(ipi)->ipi_list_lock, (d), 0) #define INP_LIST_LOCK_DESTROY(ipi) rw_destroy(&(ipi)->ipi_list_lock) #define INP_LIST_RLOCK(ipi) rw_rlock(&(ipi)->ipi_list_lock) #define INP_LIST_WLOCK(ipi) rw_wlock(&(ipi)->ipi_list_lock) #define INP_LIST_TRY_RLOCK(ipi) rw_try_rlock(&(ipi)->ipi_list_lock) #define INP_LIST_TRY_WLOCK(ipi) rw_try_wlock(&(ipi)->ipi_list_lock) #define INP_LIST_TRY_UPGRADE(ipi) rw_try_upgrade(&(ipi)->ipi_list_lock) #define INP_LIST_RUNLOCK(ipi) rw_runlock(&(ipi)->ipi_list_lock) #define INP_LIST_WUNLOCK(ipi) rw_wunlock(&(ipi)->ipi_list_lock) #define INP_LIST_LOCK_ASSERT(ipi) \ rw_assert(&(ipi)->ipi_list_lock, RA_LOCKED) #define INP_LIST_RLOCK_ASSERT(ipi) \ rw_assert(&(ipi)->ipi_list_lock, RA_RLOCKED) #define INP_LIST_WLOCK_ASSERT(ipi) \ rw_assert(&(ipi)->ipi_list_lock, RA_WLOCKED) #define INP_LIST_UNLOCK_ASSERT(ipi) \ rw_assert(&(ipi)->ipi_list_lock, RA_UNLOCKED) #define INP_HASH_LOCK_INIT(ipi, d) mtx_init(&(ipi)->ipi_hash_lock, (d), NULL, MTX_DEF) #define INP_HASH_LOCK_DESTROY(ipi) mtx_destroy(&(ipi)->ipi_hash_lock) #define INP_HASH_RLOCK(ipi) struct epoch_tracker inp_hash_et; epoch_enter_preempt(net_epoch_preempt, &inp_hash_et) #define INP_HASH_RLOCK_ET(ipi, et) epoch_enter_preempt(net_epoch_preempt, &(et)) #define INP_HASH_WLOCK(ipi) mtx_lock(&(ipi)->ipi_hash_lock) #define INP_HASH_RUNLOCK(ipi) NET_EPOCH_EXIT_ET(inp_hash_et) #define INP_HASH_RUNLOCK_ET(ipi, et) NET_EPOCH_EXIT_ET((et)) #define INP_HASH_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_hash_lock) #define INP_HASH_LOCK_ASSERT(ipi) MPASS(in_epoch(net_epoch_preempt) || mtx_owned(&(ipi)->ipi_hash_lock)) #define INP_HASH_WLOCK_ASSERT(ipi) mtx_assert(&(ipi)->ipi_hash_lock, MA_OWNED); #define INP_GROUP_LOCK_INIT(ipg, d) mtx_init(&(ipg)->ipg_lock, (d), NULL, \ MTX_DEF | MTX_DUPOK) #define INP_GROUP_LOCK_DESTROY(ipg) mtx_destroy(&(ipg)->ipg_lock) #define INP_GROUP_LOCK(ipg) mtx_lock(&(ipg)->ipg_lock) #define INP_GROUP_LOCK_ASSERT(ipg) mtx_assert(&(ipg)->ipg_lock, MA_OWNED) #define INP_GROUP_UNLOCK(ipg) mtx_unlock(&(ipg)->ipg_lock) #define INP_PCBHASH(faddr, lport, fport, mask) \ (((faddr) ^ ((faddr) >> 16) ^ ntohs((lport) ^ (fport))) & (mask)) #define INP_PCBPORTHASH(lport, mask) \ (ntohs((lport)) & (mask)) #define INP_PCBLBGROUP_PORTHASH(lport, mask) \ (ntohs((lport)) & (mask)) #define INP_PCBLBGROUP_PKTHASH(faddr, lport, fport) \ ((faddr) ^ ((faddr) >> 16) ^ ntohs((lport) ^ (fport))) #define INP6_PCBHASHKEY(faddr) ((faddr)->s6_addr32[3]) /* * Flags for inp_vflags -- historically version flags only */ #define INP_IPV4 0x1 #define INP_IPV6 0x2 #define INP_IPV6PROTO 0x4 /* opened under IPv6 protocol */ /* * Flags for inp_flags. */ #define INP_RECVOPTS 0x00000001 /* receive incoming IP options */ #define INP_RECVRETOPTS 0x00000002 /* receive IP options for reply */ #define INP_RECVDSTADDR 0x00000004 /* receive IP dst address */ #define INP_HDRINCL 0x00000008 /* user supplies entire IP header */ #define INP_HIGHPORT 0x00000010 /* user wants "high" port binding */ #define INP_LOWPORT 0x00000020 /* user wants "low" port binding */ #define INP_ANONPORT 0x00000040 /* port chosen for user */ #define INP_RECVIF 0x00000080 /* receive incoming interface */ #define INP_MTUDISC 0x00000100 /* user can do MTU discovery */ /* 0x000200 unused: was INP_FAITH */ #define INP_RECVTTL 0x00000400 /* receive incoming IP TTL */ #define INP_DONTFRAG 0x00000800 /* don't fragment packet */ #define INP_BINDANY 0x00001000 /* allow bind to any address */ #define INP_INHASHLIST 0x00002000 /* in_pcbinshash() has been called */ #define INP_RECVTOS 0x00004000 /* receive incoming IP TOS */ #define IN6P_IPV6_V6ONLY 0x00008000 /* restrict AF_INET6 socket for v6 */ #define IN6P_PKTINFO 0x00010000 /* receive IP6 dst and I/F */ #define IN6P_HOPLIMIT 0x00020000 /* receive hoplimit */ #define IN6P_HOPOPTS 0x00040000 /* receive hop-by-hop options */ #define IN6P_DSTOPTS 0x00080000 /* receive dst options after rthdr */ #define IN6P_RTHDR 0x00100000 /* receive routing header */ #define IN6P_RTHDRDSTOPTS 0x00200000 /* receive dstoptions before rthdr */ #define IN6P_TCLASS 0x00400000 /* receive traffic class value */ #define IN6P_AUTOFLOWLABEL 0x00800000 /* attach flowlabel automatically */ #define INP_TIMEWAIT 0x01000000 /* in TIMEWAIT, ppcb is tcptw */ #define INP_ONESBCAST 0x02000000 /* send all-ones broadcast */ #define INP_DROPPED 0x04000000 /* protocol drop flag */ #define INP_SOCKREF 0x08000000 /* strong socket reference */ #define INP_RESERVED_0 0x10000000 /* reserved field */ #define INP_RESERVED_1 0x20000000 /* reserved field */ #define IN6P_RFC2292 0x40000000 /* used RFC2292 API on the socket */ #define IN6P_MTU 0x80000000 /* receive path MTU */ #define INP_CONTROLOPTS (INP_RECVOPTS|INP_RECVRETOPTS|INP_RECVDSTADDR|\ INP_RECVIF|INP_RECVTTL|INP_RECVTOS|\ IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\ IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS|\ IN6P_TCLASS|IN6P_AUTOFLOWLABEL|IN6P_RFC2292|\ IN6P_MTU) /* * Flags for inp_flags2. */ -#define INP_LLE_VALID 0x00000001 /* cached lle is valid */ -#define INP_RT_VALID 0x00000002 /* cached rtentry is valid */ +#define INP_2UNUSED1 0x00000001 +#define INP_2UNUSED2 0x00000002 #define INP_PCBGROUPWILD 0x00000004 /* in pcbgroup wildcard list */ #define INP_REUSEPORT 0x00000008 /* SO_REUSEPORT option is set */ #define INP_FREED 0x00000010 /* inp itself is not valid */ #define INP_REUSEADDR 0x00000020 /* SO_REUSEADDR option is set */ #define INP_BINDMULTI 0x00000040 /* IP_BINDMULTI option is set */ #define INP_RSS_BUCKET_SET 0x00000080 /* IP_RSS_LISTEN_BUCKET is set */ #define INP_RECVFLOWID 0x00000100 /* populate recv datagram with flow info */ #define INP_RECVRSSBUCKETID 0x00000200 /* populate recv datagram with bucket id */ #define INP_RATE_LIMIT_CHANGED 0x00000400 /* rate limit needs attention */ #define INP_ORIGDSTADDR 0x00000800 /* receive IP dst address/port */ #define INP_CANNOT_DO_ECN 0x00001000 /* The stack does not do ECN */ #define INP_REUSEPORT_LB 0x00002000 /* SO_REUSEPORT_LB option is set */ /* * Flags passed to in_pcblookup*() functions. */ #define INPLOOKUP_WILDCARD 0x00000001 /* Allow wildcard sockets. */ #define INPLOOKUP_RLOCKPCB 0x00000002 /* Return inpcb read-locked. */ #define INPLOOKUP_WLOCKPCB 0x00000004 /* Return inpcb write-locked. */ #define INPLOOKUP_MASK (INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB | \ INPLOOKUP_WLOCKPCB) #define sotoinpcb(so) ((struct inpcb *)(so)->so_pcb) #define sotoin6pcb(so) sotoinpcb(so) /* for KAME src sync over BSD*'s */ #define INP_SOCKAF(so) so->so_proto->pr_domain->dom_family #define INP_CHECK_SOCKAF(so, af) (INP_SOCKAF(so) == af) /* * Constants for pcbinfo.ipi_hashfields. */ #define IPI_HASHFIELDS_NONE 0 #define IPI_HASHFIELDS_2TUPLE 1 #define IPI_HASHFIELDS_4TUPLE 2 #ifdef _KERNEL VNET_DECLARE(int, ipport_reservedhigh); VNET_DECLARE(int, ipport_reservedlow); VNET_DECLARE(int, ipport_lowfirstauto); VNET_DECLARE(int, ipport_lowlastauto); VNET_DECLARE(int, ipport_firstauto); VNET_DECLARE(int, ipport_lastauto); VNET_DECLARE(int, ipport_hifirstauto); VNET_DECLARE(int, ipport_hilastauto); VNET_DECLARE(int, ipport_randomized); VNET_DECLARE(int, ipport_randomcps); VNET_DECLARE(int, ipport_randomtime); VNET_DECLARE(int, ipport_stoprandom); VNET_DECLARE(int, ipport_tcpallocs); #define V_ipport_reservedhigh VNET(ipport_reservedhigh) #define V_ipport_reservedlow VNET(ipport_reservedlow) #define V_ipport_lowfirstauto VNET(ipport_lowfirstauto) #define V_ipport_lowlastauto VNET(ipport_lowlastauto) #define V_ipport_firstauto VNET(ipport_firstauto) #define V_ipport_lastauto VNET(ipport_lastauto) #define V_ipport_hifirstauto VNET(ipport_hifirstauto) #define V_ipport_hilastauto VNET(ipport_hilastauto) #define V_ipport_randomized VNET(ipport_randomized) #define V_ipport_randomcps VNET(ipport_randomcps) #define V_ipport_randomtime VNET(ipport_randomtime) #define V_ipport_stoprandom VNET(ipport_stoprandom) #define V_ipport_tcpallocs VNET(ipport_tcpallocs) void in_pcbinfo_destroy(struct inpcbinfo *); void in_pcbinfo_init(struct inpcbinfo *, const char *, struct inpcbhead *, int, int, char *, uma_init, u_int); int in_pcbbind_check_bindmulti(const struct inpcb *ni, const struct inpcb *oi); struct inpcbgroup * in_pcbgroup_byhash(struct inpcbinfo *, u_int, uint32_t); struct inpcbgroup * in_pcbgroup_byinpcb(struct inpcb *); struct inpcbgroup * in_pcbgroup_bytuple(struct inpcbinfo *, struct in_addr, u_short, struct in_addr, u_short); void in_pcbgroup_destroy(struct inpcbinfo *); int in_pcbgroup_enabled(struct inpcbinfo *); void in_pcbgroup_init(struct inpcbinfo *, u_int, int); void in_pcbgroup_remove(struct inpcb *); void in_pcbgroup_update(struct inpcb *); void in_pcbgroup_update_mbuf(struct inpcb *, struct mbuf *); void in_pcbpurgeif0(struct inpcbinfo *, struct ifnet *); int in_pcballoc(struct socket *, struct inpcbinfo *); int in_pcbbind(struct inpcb *, struct sockaddr *, struct ucred *); int in_pcb_lport(struct inpcb *, struct in_addr *, u_short *, struct ucred *, int); int in_pcbbind_setup(struct inpcb *, struct sockaddr *, in_addr_t *, u_short *, struct ucred *); int in_pcbconnect(struct inpcb *, struct sockaddr *, struct ucred *); int in_pcbconnect_mbuf(struct inpcb *, struct sockaddr *, struct ucred *, struct mbuf *); int in_pcbconnect_setup(struct inpcb *, struct sockaddr *, in_addr_t *, u_short *, in_addr_t *, u_short *, struct inpcb **, struct ucred *); void in_pcbdetach(struct inpcb *); void in_pcbdisconnect(struct inpcb *); void in_pcbdrop(struct inpcb *); void in_pcbfree(struct inpcb *); int in_pcbinshash(struct inpcb *); int in_pcbinshash_nopcbgroup(struct inpcb *); int in_pcbladdr(struct inpcb *, struct in_addr *, struct in_addr *, struct ucred *); struct inpcb * in_pcblookup_local(struct inpcbinfo *, struct in_addr, u_short, int, struct ucred *); struct inpcb * in_pcblookup(struct inpcbinfo *, struct in_addr, u_int, struct in_addr, u_int, int, struct ifnet *); struct inpcb * in_pcblookup_mbuf(struct inpcbinfo *, struct in_addr, u_int, struct in_addr, u_int, int, struct ifnet *, struct mbuf *); void in_pcbnotifyall(struct inpcbinfo *pcbinfo, struct in_addr, int, struct inpcb *(*)(struct inpcb *, int)); void in_pcbref(struct inpcb *); void in_pcbrehash(struct inpcb *); void in_pcbrehash_mbuf(struct inpcb *, struct mbuf *); int in_pcbrele(struct inpcb *); int in_pcbrele_rlocked(struct inpcb *); int in_pcbrele_wlocked(struct inpcb *); void in_pcblist_rele_rlocked(epoch_context_t ctx); void in_losing(struct inpcb *); void in_pcbsetsolabel(struct socket *so); int in_getpeeraddr(struct socket *so, struct sockaddr **nam); int in_getsockaddr(struct socket *so, struct sockaddr **nam); struct sockaddr * in_sockaddr(in_port_t port, struct in_addr *addr); void in_pcbsosetlabel(struct socket *so); #ifdef RATELIMIT int in_pcbattach_txrtlmt(struct inpcb *, struct ifnet *, uint32_t, uint32_t, uint32_t); void in_pcbdetach_txrtlmt(struct inpcb *); int in_pcbmodify_txrtlmt(struct inpcb *, uint32_t); int in_pcbquery_txrtlmt(struct inpcb *, uint32_t *); int in_pcbquery_txrlevel(struct inpcb *, uint32_t *); void in_pcboutput_txrtlmt(struct inpcb *, struct ifnet *, struct mbuf *); void in_pcboutput_eagain(struct inpcb *); #endif #endif /* _KERNEL */ #endif /* !_NETINET_IN_PCB_H_ */