Index: head/etc/fbtab
===================================================================
--- head/etc/fbtab	(revision 338398)
+++ head/etc/fbtab	(nonexistent)
@@ -1,4 +0,0 @@
-# $FreeBSD$
-#
-#/dev/ttyv0	0600	/dev/console
-#/dev/ttyv0	0600	/dev/pcaudio:/dev/pcaudioctl

Property changes on: head/etc/fbtab
___________________________________________________________________
Deleted: svn:keywords
## -1 +0,0 ##
-FreeBSD=%H
\ No newline at end of property
Index: head/etc/login.conf
===================================================================
--- head/etc/login.conf	(revision 338398)
+++ head/etc/login.conf	(nonexistent)
@@ -1,322 +0,0 @@
-# login.conf - login class capabilities database.
-#
-# Remember to rebuild the database after each change to this file:
-#
-#	cap_mkdb /etc/login.conf
-#
-# This file controls resource limits, accounting limits and
-# default user environment settings.
-#
-# $FreeBSD$
-#
-
-# Default settings effectively disable resource limits, see the
-# examples below for a starting point to enable them.
-
-# defaults
-# These settings are used by login(1) by default for classless users
-# Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
-#
-# Note that since a colon ':' is used to separate capability entries,
-# a \c escape sequence must be used to embed a literal colon in the
-# value or name of a capability (see the ``CGETNUM AND CGETSTR SYNTAX
-# AND SEMANTICS'' section of getcap(3) for more escape sequences).
-
-default:\
-	:passwd_format=sha512:\
-	:copyright=/etc/COPYRIGHT:\
-	:welcome=/etc/motd:\
-	:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
-	:path=/sbin /bin /usr/sbin /usr/bin /usr/local/sbin /usr/local/bin ~/bin:\
-	:nologin=/var/run/nologin:\
-	:cputime=unlimited:\
-	:datasize=unlimited:\
-	:stacksize=unlimited:\
-	:memorylocked=64K:\
-	:memoryuse=unlimited:\
-	:filesize=unlimited:\
-	:coredumpsize=unlimited:\
-	:openfiles=unlimited:\
-	:maxproc=unlimited:\
-	:sbsize=unlimited:\
-	:vmemoryuse=unlimited:\
-	:swapuse=unlimited:\
-	:pseudoterminals=unlimited:\
-	:kqueues=unlimited:\
-	:umtxp=unlimited:\
-	:priority=0:\
-	:ignoretime@:\
-	:umask=022:
-
-
-#
-# A collection of common class names - forward them all to 'default'
-# (login would normally do this anyway, but having a class name
-#  here suppresses the diagnostic)
-#
-standard:\
-	:tc=default:
-xuser:\
-	:tc=default:
-staff:\
-	:tc=default:
-daemon:\
-	:memorylocked=128M:\
-	:tc=default:
-news:\
-	:tc=default:
-dialer:\
-	:tc=default:
-
-#
-# Root can always login
-#
-# N.B.  login_getpwclass(3) will use this entry for the root account,
-#       in preference to 'default'.
-root:\
-	:ignorenologin:\
-	:memorylocked=unlimited:\
-	:tc=default:
-
-#
-# Russian Users Accounts. Setup proper environment variables.
-#
-russian|Russian Users Accounts:\
-	:charset=UTF-8:\
-	:lang=ru_RU.UTF-8:\
-	:tc=default:
-
-
-######################################################################
-######################################################################
-##
-## Example entries
-##
-######################################################################
-######################################################################
-
-## Example defaults
-## These settings are used by login(1) by default for classless users
-## Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
-#
-#default:\
-#	:cputime=infinity:\
-#	:datasize-cur=22M:\
-#	:stacksize-cur=8M:\
-#	:memorylocked-cur=10M:\
-#	:memoryuse-cur=30M:\
-#	:filesize=infinity:\
-#	:coredumpsize=infinity:\
-#	:maxproc-cur=64:\
-#	:openfiles-cur=64:\
-#	:priority=0:\
-#	:requirehome@:\
-#	:umask=022:\
-#	:tc=auth-defaults:
-#
-#
-##
-## standard - standard user defaults
-##
-#standard:\
-#	:copyright=/etc/COPYRIGHT:\
-#	:welcome=/etc/motd:\
-#	:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
-#	:path=~/bin /bin /usr/bin /usr/local/bin:\
-#	:manpath=/usr/share/man /usr/local/man:\
-#	:nologin=/var/run/nologin:\
-#	:cputime=1h30m:\
-#	:datasize=8M:\
-#	:vmemoryuse=100M:\
-#	:stacksize=2M:\
-#	:memorylocked=4M:\
-#	:memoryuse=8M:\
-#	:filesize=8M:\
-#	:coredumpsize=8M:\
-#	:openfiles=24:\
-#	:maxproc=32:\
-#	:priority=0:\
-#	:requirehome:\
-#	:passwordtime=90d:\
-#	:umask=002:\
-#	:ignoretime@:\
-#	:tc=default:
-#
-#
-##
-## users of X (needs more resources!)
-##
-#xuser:\
-#	:manpath=/usr/share/man /usr/local/man:\
-#	:cputime=4h:\
-#	:datasize=12M:\
-#	:vmemoryuse=infinity:\
-#	:stacksize=4M:\
-#	:filesize=8M:\
-#	:memoryuse=16M:\
-#	:openfiles=32:\
-#	:maxproc=48:\
-#	:tc=standard:
-#
-#
-##
-## Staff users - few restrictions and allow login anytime
-##
-#staff:\
-#	:ignorenologin:\
-#	:ignoretime:\
-#	:requirehome@:\
-#	:accounted@:\
-#	:path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
-#	:umask=022:\
-#	:tc=standard:
-#
-#
-##
-## root - fallback for root logins
-##
-#root:\
-#	:path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
-#	:cputime=infinity:\
-#	:datasize=infinity:\
-#	:stacksize=infinity:\
-#	:memorylocked=infinity:\
-#	:memoryuse=infinity:\
-#	:filesize=infinity:\
-#	:coredumpsize=infinity:\
-#	:openfiles=infinity:\
-#	:maxproc=infinity:\
-#	:memoryuse-cur=32M:\
-#	:maxproc-cur=64:\
-#	:openfiles-cur=1024:\
-#	:priority=0:\
-#	:requirehome@:\
-#	:umask=022:\
-#	:tc=auth-root-defaults:
-#
-#
-##
-## Settings used by /etc/rc
-##
-#daemon:\
-#	:coredumpsize@:\
-#	:coredumpsize-cur=0:\
-#	:datasize=infinity:\
-#	:datasize-cur@:\
-#	:maxproc=512:\
-#	:maxproc-cur@:\
-#	:memoryuse-cur=64M:\
-#	:memorylocked-cur=64M:\
-#	:openfiles=1024:\
-#	:openfiles-cur@:\
-#	:stacksize=16M:\
-#	:stacksize-cur@:\
-#	:tc=default:
-#
-#
-##
-## Settings used by news subsystem
-##
-#news:\
-#	:path=/usr/local/news/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
-#	:cputime=infinity:\
-#	:filesize=128M:\
-#	:datasize-cur=64M:\
-#	:stacksize-cur=32M:\
-#	:coredumpsize-cur=0:\
-#	:maxmemorysize-cur=128M:\
-#	:memorylocked=32M:\
-#	:maxproc=128:\
-#	:openfiles=256:\
-#	:tc=default:
-#
-#
-##
-## The dialer class should be used for a dialup PPP account
-## Welcome messages/news suppressed
-##
-#dialer:\
-#	:hushlogin:\
-#	:requirehome@:\
-#	:cputime=unlimited:\
-#	:filesize=2M:\
-#	:datasize=2M:\
-#	:stacksize=4M:\
-#	:coredumpsize=0:\
-#	:memoryuse=4M:\
-#	:memorylocked=1M:\
-#	:maxproc=16:\
-#	:openfiles=32:\
-#	:tc=standard:
-#
-#
-##
-## Site full-time 24/7 PPP connection
-## - no time accounting, restricted to access via dialin lines
-##
-#site:\
-#	:ignoretime:\
-#	:passwordtime@:\
-#	:refreshtime@:\
-#	:refreshperiod@:\
-#	:sessionlimit@:\
-#	:autodelete@:\
-#	:expireperiod@:\
-#	:graceexpire@:\
-#	:gracetime@:\
-#	:warnexpire@:\
-#	:warnpassword@:\
-#	:idletime@:\
-#	:sessiontime@:\
-#	:daytime@:\
-#	:weektime@:\
-#	:monthtime@:\
-#	:warntime@:\
-#	:accounted@:\
-#	:tc=dialer:\
-#	:tc=staff:
-#
-#
-##
-## Example standard accounting entries for subscriber levels
-##
-#
-#subscriber|Subscribers:\
-#	:accounted:\
-#	:refreshtime=180d:\
-#	:refreshperiod@:\
-#	:sessionlimit@:\
-#	:autodelete=30d:\
-#	:expireperiod=180d:\
-#	:graceexpire=7d:\
-#	:gracetime=10m:\
-#	:warnexpire=7d:\
-#	:warnpassword=7d:\
-#	:idletime=30m:\
-#	:sessiontime=4h:\
-#	:daytime=6h:\
-#	:weektime=40h:\
-#	:monthtime=120h:\
-#	:warntime=4h:\
-#	:tc=standard:
-#
-#
-##
-## Subscriber accounts. These accounts have their login times
-## accounted and have access limits applied.
-##
-#subppp|PPP Subscriber Accounts:\
-#	:tc=dialer:\
-#	:tc=subscriber:
-#
-#
-#subshell|Shell Subscriber Accounts:\
-#	:tc=subscriber:
-#
-##
-## If you want some of the accounts to use traditional UNIX DES based
-## password hashes.
-##
-#des_users:\
-#	:passwd_format=des:\
-#	:tc=default:

Property changes on: head/etc/login.conf
___________________________________________________________________
Deleted: svn:keywords
## -1 +0,0 ##
-FreeBSD=%H
\ No newline at end of property
Index: head/etc/motd
===================================================================
--- head/etc/motd	(revision 338398)
+++ head/etc/motd	(nonexistent)
@@ -1,21 +0,0 @@
-FreeBSD ?.?.?  (UNKNOWN)
-
-Welcome to FreeBSD!
-
-Release Notes, Errata: https://www.FreeBSD.org/releases/
-Security Advisories:   https://www.FreeBSD.org/security/
-FreeBSD Handbook:      https://www.FreeBSD.org/handbook/
-FreeBSD FAQ:           https://www.FreeBSD.org/faq/
-Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
-FreeBSD Forums:        https://forums.FreeBSD.org/
-
-Documents installed with the system are in the /usr/local/share/doc/freebsd/
-directory, or can be installed later with:  pkg install en-freebsd-doc
-For other languages, replace "en" with a language code like de or fr.
-
-Show the version of FreeBSD installed:  freebsd-version ; uname -a
-Please include that output and any error messages when posting questions.
-Introduction to manual pages:  man man
-FreeBSD directory layout:      man hier
-
-Edit /etc/motd to change this login announcement.

Property changes on: head/etc/motd
___________________________________________________________________
Deleted: fbsd:nokeywords
## -1 +0,0 ##
-y
\ No newline at end of property
Index: head/etc/Makefile
===================================================================
--- head/etc/Makefile	(revision 338398)
+++ head/etc/Makefile	(revision 338399)
@@ -1,280 +1,275 @@
 #	from: @(#)Makefile	5.11 (Berkeley) 5/21/91
 # $FreeBSD$
 
 .include <src.opts.mk>
 
 FILESGROUPS=	FILES
 
 # No need as it is empty and just causes rebuilds since this file does so much.
 UPDATE_DEPENDFILE=	no
 
 .if ${MK_SENDMAIL} != "no"
 SUBDIR+=sendmail
 .endif
 
 BIN1=	crontab \
 	dhclient.conf \
 	disktab \
-	fbtab \
 	gettytab \
 	group \
 	hosts \
 	hosts.allow \
 	hosts.equiv \
 	libalias.conf \
 	libmap.conf \
 	login.access \
-	login.conf \
 	mac.conf \
-	motd \
 	netconfig \
 	networks \
 	nsswitch.conf \
 	phones \
 	protocols \
 	rc.bsdextended \
 	rc.firewall \
 	remote \
 	rpc \
 	termcap.small
 
 .if exists(${.CURDIR}/etc.${MACHINE}/ttys)
 BIN1+=	etc.${MACHINE}/ttys
 .elif exists(${.CURDIR}/etc.${MACHINE_ARCH}/ttys)
 BIN1+=	etc.${MACHINE_ARCH}/ttys
 .elif exists(${.CURDIR}/etc.${MACHINE_CPUARCH}/ttys)
 BIN1+=	etc.${MACHINE_CPUARCH}/ttys
 .else
 .error etc.MACHINE/ttys missing
 .endif
 
 # NB: keep these sorted by MK_* knobs
 
 .if ${MK_AMD} != "no"
 BIN1+= amd.map
 .endif
 
 .if ${MK_LOCATE} != "no"
 BIN1+=	${SRCTOP}/usr.bin/locate/locate/locate.rc
 .endif
 
 .if ${MK_LPR} != "no"
 BIN1+=	hosts.lpd printcap
 .endif
 
 .if ${MK_MAIL} != "no"
 BIN1+=	${SRCTOP}/usr.bin/mail/misc/mail.rc
 .endif
 
 .if ${MK_OPENSSL} != "no"
 SSL=	${SRCTOP}/crypto/openssl/apps/openssl.cnf
 .endif
 
 .if ${MK_SENDMAIL} != "no"
 BIN1+=	rc.sendmail
 .endif
 
 .if ${MK_WIRELESS} != "no"
 BIN1+= regdomain.xml
 .endif
 
 .if ${MK_SENDMAIL} == "no"
 ETCMAIL=mailer.conf aliases
 .else
 ETCMAIL=Makefile README mailer.conf access.sample virtusertable.sample \
 	mailertable.sample aliases
 .endif
 
 # Special top level files for FreeBSD
 FREEBSD=COPYRIGHT
 
 # Sanitize DESTDIR
 DESTDIR:=	${DESTDIR:C://*:/:g}
 
 afterinstall:
 .if ${MK_MAN} != "no"
 	${_+_}cd ${SRCTOP}/share/man; ${MAKE} makedb
 .endif
 
 distribute:
 	# Avoid installing tests here; "make distribution" will do this and
 	# correctly place them in the right location.
 	${_+_}cd ${.CURDIR} ; ${MAKE} MK_TESTS=no install \
 	    DESTDIR=${DISTDIR}/${DISTRIBUTION}
 	${_+_}cd ${.CURDIR} ; ${MAKE} distribution DESTDIR=${DISTDIR}/${DISTRIBUTION}
 
 .include <bsd.endian.mk>
 
 .if defined(NO_ROOT)
 METALOG.add?=	cat -l >> ${METALOG}
 .endif
 
 distribution:
 .if !defined(DESTDIR)
 	@echo "set DESTDIR before running \"make ${.TARGET}\""
 	@false
 .endif
 	cd ${.CURDIR}; \
 	    ${INSTALL} -o ${BINOWN} -g ${BINGRP} -m 644 \
 		${BIN1} ${DESTDIR}/etc; \
-	    cap_mkdb ${CAP_MKDB_ENDIAN} ${DESTDIR}/etc/login.conf; \
 	    ${INSTALL} -o ${BINOWN} -g ${BINGRP} -m 600 \
 		master.passwd nsmb.conf opieaccess ${DESTDIR}/etc;
 
 .if ${MK_TCSH} == "no"
 	sed -i "" -e 's;/bin/csh;/bin/sh;' ${DESTDIR}/etc/master.passwd
 .endif
 	pwd_mkdb -i -p -d ${DESTDIR}/etc ${DESTDIR}/etc/master.passwd
 .if defined(NO_ROOT)
 	( \
-		echo "./etc/login.conf.db type=file mode=0644 uname=root gname=wheel"; \
 		echo "./etc/passwd type=file mode=0644 uname=root gname=wheel"; \
 		echo "./etc/pwd.db type=file mode=0644 uname=root gname=wheel"; \
 		echo "./etc/spwd.db type=file mode=0600 uname=root gname=wheel"; \
 	) | ${METALOG.add}
 .endif
 	${_+_}cd ${.CURDIR}/gss; ${MAKE} install
 	${_+_}cd ${.CURDIR}/mtree; ${MAKE} install
 	${_+_}cd ${SRCTOP}/share/termcap; ${MAKE} etc-termcap
 	${_+_}cd ${SRCTOP}/usr.sbin/rmt; ${MAKE} etc-rmt
 	${_+_}cd ${.CURDIR}/pam.d; ${MAKE} install
 .if ${MK_UNBOUND} != "no"
 	if [ ! -e ${DESTDIR}/etc/unbound ]; then \
 		${INSTALL_SYMLINK} ../var/unbound ${DESTDIR}/etc/unbound; \
 	fi
 .endif
 .if ${MK_SENDMAIL} != "no"
 	${_+_}cd ${.CURDIR}/sendmail; ${MAKE} distribution
 .endif
 .if ${MK_OPENSSL} != "no"
 	cd ${.CURDIR}; ${INSTALL} -o ${BINOWN} -g ${BINGRP} -m 644 \
 	    ${SSL} ${DESTDIR}/etc/ssl
 .endif
 .if ${MK_KERBEROS} != "no"
 	cd ${.CURDIR}/root; \
 	    ${INSTALL} -o ${BINOWN} -g ${BINGRP} -m 644 \
 		dot.k5login ${DESTDIR}/root/.k5login;
 .endif
 
 .if ${MK_MAIL} != "no"
 	cd ${.CURDIR}/mail; ${INSTALL} -o ${BINOWN} -g ${BINGRP} -m 644 \
 	    ${ETCMAIL} ${DESTDIR}/etc/mail
 	if [ -d ${DESTDIR}/etc/mail -a -f ${DESTDIR}/etc/mail/aliases -a \
 	      ! -f ${DESTDIR}/etc/aliases ]; then \
 		${INSTALL_SYMLINK} mail/aliases ${DESTDIR}/etc/aliases; \
 	fi
 .endif
 .if ${MK_LOCATE} != "no"
 	${INSTALL} -o nobody -g ${BINGRP} -m 644 /dev/null \
 	    ${DESTDIR}/var/db/locate.database
 .endif
 	cd ${.CURDIR}/..; ${INSTALL} -o ${BINOWN} -g ${BINGRP} -m 444 \
 		${FREEBSD} ${DESTDIR}/
 .if ${MK_BOOT} != "no"
 .if exists(${SRCTOP}/sys/${MACHINE}/conf/GENERIC.hints)
 	${INSTALL} -o ${BINOWN} -g ${BINGRP} -m 444 \
 	    ${SRCTOP}/sys/${MACHINE}/conf/GENERIC.hints \
 	    ${DESTDIR}/boot/device.hints
 .endif
 .endif
 .if ${MK_NIS} == "no"
 	sed -i "" -e 's/.*_compat:/# &/' -e 's/compat$$/files/' \
 		${DESTDIR}/etc/nsswitch.conf
 .endif
 
 MTREE_CMD?=	mtree
 
 MTREES=		mtree/BSD.root.dist		/		\
 		mtree/BSD.var.dist		/var		\
 		mtree/BSD.usr.dist		/usr		\
 		mtree/BSD.include.dist		/usr/include	\
 		mtree/BSD.debug.dist		/usr/lib
 .if ${MK_LIB32} != "no"
 MTREES+=	mtree/BSD.lib32.dist		/usr
 MTREES+=	mtree/BSD.lib32.dist		/usr/lib/debug/usr
 .endif
 .if ${MK_LIBSOFT} != "no"
 MTREES+=	mtree/BSD.libsoft.dist		/usr
 MTREES+=	mtree/BSD.libsoft.dist		/usr/lib/debug/usr
 .endif
 .if ${MK_TESTS} != "no"
 MTREES+=	mtree/BSD.tests.dist		${TESTSBASE}
 MTREES+=	mtree/BSD.tests.dist		/usr/lib/debug/${TESTSBASE}
 .endif
 .if ${MK_SENDMAIL} != "no"
 MTREES+=	mtree/BSD.sendmail.dist		/
 .endif
 .for mtree in ${LOCAL_MTREE}
 MTREES+=	../${mtree}			/
 .endfor
 
 # Clean up some directories that where mistakenly created as files that
 # should not have been as part of the nvi update in r281994.
 # This should be removed after 11.0-RELEASE.
 DISTRIB_CLEANUP_SHARE_FILES=	${SHAREDIR}/doc/usd/10.exref ${SHAREDIR}/doc/usd/11.edit
 DISTRIB_CLEANUP_SHARE_FILES+=	${SHAREDIR}/doc/usd/12.vi ${SHAREDIR}/doc/usd/13.viref
 distrib-cleanup: .PHONY
 	for file in ${DISTRIB_CLEANUP_SHARE_FILES}; do \
 		if [ -f ${DESTDIR}/$${file} ]; then \
 			rm -f ${DESTDIR}/$${file}; \
 		fi; \
 	done
 
 distrib-dirs: ${MTREES:N/*} distrib-cleanup .PHONY
 	@set ${MTREES}; \
 	while test $$# -ge 2; do \
 		m=${.CURDIR}/$$1; \
 		shift; \
 		d=${DESTDIR}$$1; \
 		shift; \
 		test -d $$d || mkdir -p $$d; \
 		${ECHO} ${MTREE_CMD} -deU ${MTREE_FSCHG} \
 		    ${MTREE_FOLLOWS_SYMLINKS} -f $$m -p $$d; \
 		${MTREE_FILTER} $$m | \
 		${MTREE_CMD} -deU ${MTREE_FSCHG} ${MTREE_FOLLOWS_SYMLINKS} \
 		    -p $$d; \
 	done; true
 .if defined(NO_ROOT)
 	@set ${MTREES}; \
 	while test $$# -ge 2; do \
 		m=${.CURDIR}/$$1; \
 		shift; \
 		d=$$1; \
 		test "$$d" == "/" && d=""; \
 		d=${DISTBASE}$$d; \
 		shift; \
 		test -d ${DESTDIR}/$$d || mkdir -p ${DESTDIR}/$$d; \
 		${ECHO} "${MTREE_CMD:N-W} -C -f $$m -K all | " \
 		    "sed s#^\.#.$$d# | ${METALOG.add}" ; \
 		${MTREE_FILTER} $$m | \
 		${MTREE_CMD:N-W} -C -K all | sed s#^\.#.$$d# | \
 		    ${METALOG.add} ; \
 	done; true
 .endif
 .if ${MK_NLS} != "no"
 	set - `grep "^[a-zA-Z]" ${.CURDIR}/nls.alias`; \
 	while [ $$# -gt 0 ] ; do \
 		${INSTALL_SYMLINK} "$$2" "${DESTDIR}${SHAREDIR}/nls/$$1"; \
 		shift; shift; \
 	done
 .endif
 
 etc-examples: ${META_DEPS}
 	cd ${.CURDIR}; ${INSTALL} ${TAG_ARGS} -o ${BINOWN} -g ${BINGRP} -m 444 \
 	    ${BIN1} ${BIN2} nsmb.conf opieaccess \
 	    ${DESTDIR}${SHAREDIR}/examples/etc
 
 .include <bsd.prog.mk>
 
 .if ${MK_INSTALL_AS_USER} == "yes" && ${_uid} != 0
 MTREE_FILTER= sed -e 's,\([gu]\)name=,\1id=,g' \
 	-e 's,\(uid=\)[^ ]* ,\1${_uid} ,' \
 	-e 's,\(gid=\)[^ ]* ,\1${_gid} ,' \
 	-e 's,\(uid=\)[^ ]*$$,\1${_uid},' \
 	-e 's,\(gid=\)[^ ]*$$,\1${_gid},'
 .else
 MTREE_FILTER= cat
 .if !defined(NO_FSCHG)
 MTREE_FSCHG=	-i
 .endif
 .endif
Index: head/usr.bin/login/Makefile
===================================================================
--- head/usr.bin/login/Makefile	(revision 338398)
+++ head/usr.bin/login/Makefile	(revision 338399)
@@ -1,25 +1,34 @@
 # 	@(#)Makefile	8.1 (Berkeley) 7/19/93
 # $FreeBSD$
 
 .include <src.opts.mk>
 
+CONFS=	fbtab login.conf motd
 PROG=	login
 SRCS=	login.c login_fbtab.c
 CFLAGS+=-DLOGALL
 LIBADD=	util pam
 
 WARNS?=	5
 
 .if ${MK_AUDIT} != "no"
 SRCS+=	login_audit.c
 CFLAGS+= -DUSE_BSM_AUDIT
 LIBADD+=	bsm
 .endif
 
 .if ${MK_SETUID_LOGIN} != "no"
 BINOWN=	root
 BINMODE=4555
 PRECIOUSPROG=
+.endif
+
+.include <bsd.endian.mk>
+afterinstallconfig:
+	cap_mkdb ${CAP_MKDB_ENDIAN} ${DESTDIR}/etc/login.conf
+.if defined(NO_ROOT) && defined(METALOG)
+	echo "./etc/login.conf.db type=file mode=0644 uname=root gname=wheel" | \
+		cat -l >> ${METALOG}
 .endif
 
 .include <bsd.prog.mk>
Index: head/usr.bin/login/fbtab
===================================================================
--- head/usr.bin/login/fbtab	(nonexistent)
+++ head/usr.bin/login/fbtab	(revision 338399)
@@ -0,0 +1,4 @@
+# $FreeBSD$
+#
+#/dev/ttyv0	0600	/dev/console
+#/dev/ttyv0	0600	/dev/pcaudio:/dev/pcaudioctl

Property changes on: head/usr.bin/login/fbtab
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Index: head/usr.bin/login/login.conf
===================================================================
--- head/usr.bin/login/login.conf	(nonexistent)
+++ head/usr.bin/login/login.conf	(revision 338399)
@@ -0,0 +1,322 @@
+# login.conf - login class capabilities database.
+#
+# Remember to rebuild the database after each change to this file:
+#
+#	cap_mkdb /etc/login.conf
+#
+# This file controls resource limits, accounting limits and
+# default user environment settings.
+#
+# $FreeBSD$
+#
+
+# Default settings effectively disable resource limits, see the
+# examples below for a starting point to enable them.
+
+# defaults
+# These settings are used by login(1) by default for classless users
+# Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
+#
+# Note that since a colon ':' is used to separate capability entries,
+# a \c escape sequence must be used to embed a literal colon in the
+# value or name of a capability (see the ``CGETNUM AND CGETSTR SYNTAX
+# AND SEMANTICS'' section of getcap(3) for more escape sequences).
+
+default:\
+	:passwd_format=sha512:\
+	:copyright=/etc/COPYRIGHT:\
+	:welcome=/etc/motd:\
+	:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
+	:path=/sbin /bin /usr/sbin /usr/bin /usr/local/sbin /usr/local/bin ~/bin:\
+	:nologin=/var/run/nologin:\
+	:cputime=unlimited:\
+	:datasize=unlimited:\
+	:stacksize=unlimited:\
+	:memorylocked=64K:\
+	:memoryuse=unlimited:\
+	:filesize=unlimited:\
+	:coredumpsize=unlimited:\
+	:openfiles=unlimited:\
+	:maxproc=unlimited:\
+	:sbsize=unlimited:\
+	:vmemoryuse=unlimited:\
+	:swapuse=unlimited:\
+	:pseudoterminals=unlimited:\
+	:kqueues=unlimited:\
+	:umtxp=unlimited:\
+	:priority=0:\
+	:ignoretime@:\
+	:umask=022:
+
+
+#
+# A collection of common class names - forward them all to 'default'
+# (login would normally do this anyway, but having a class name
+#  here suppresses the diagnostic)
+#
+standard:\
+	:tc=default:
+xuser:\
+	:tc=default:
+staff:\
+	:tc=default:
+daemon:\
+	:memorylocked=128M:\
+	:tc=default:
+news:\
+	:tc=default:
+dialer:\
+	:tc=default:
+
+#
+# Root can always login
+#
+# N.B.  login_getpwclass(3) will use this entry for the root account,
+#       in preference to 'default'.
+root:\
+	:ignorenologin:\
+	:memorylocked=unlimited:\
+	:tc=default:
+
+#
+# Russian Users Accounts. Setup proper environment variables.
+#
+russian|Russian Users Accounts:\
+	:charset=UTF-8:\
+	:lang=ru_RU.UTF-8:\
+	:tc=default:
+
+
+######################################################################
+######################################################################
+##
+## Example entries
+##
+######################################################################
+######################################################################
+
+## Example defaults
+## These settings are used by login(1) by default for classless users
+## Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
+#
+#default:\
+#	:cputime=infinity:\
+#	:datasize-cur=22M:\
+#	:stacksize-cur=8M:\
+#	:memorylocked-cur=10M:\
+#	:memoryuse-cur=30M:\
+#	:filesize=infinity:\
+#	:coredumpsize=infinity:\
+#	:maxproc-cur=64:\
+#	:openfiles-cur=64:\
+#	:priority=0:\
+#	:requirehome@:\
+#	:umask=022:\
+#	:tc=auth-defaults:
+#
+#
+##
+## standard - standard user defaults
+##
+#standard:\
+#	:copyright=/etc/COPYRIGHT:\
+#	:welcome=/etc/motd:\
+#	:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
+#	:path=~/bin /bin /usr/bin /usr/local/bin:\
+#	:manpath=/usr/share/man /usr/local/man:\
+#	:nologin=/var/run/nologin:\
+#	:cputime=1h30m:\
+#	:datasize=8M:\
+#	:vmemoryuse=100M:\
+#	:stacksize=2M:\
+#	:memorylocked=4M:\
+#	:memoryuse=8M:\
+#	:filesize=8M:\
+#	:coredumpsize=8M:\
+#	:openfiles=24:\
+#	:maxproc=32:\
+#	:priority=0:\
+#	:requirehome:\
+#	:passwordtime=90d:\
+#	:umask=002:\
+#	:ignoretime@:\
+#	:tc=default:
+#
+#
+##
+## users of X (needs more resources!)
+##
+#xuser:\
+#	:manpath=/usr/share/man /usr/local/man:\
+#	:cputime=4h:\
+#	:datasize=12M:\
+#	:vmemoryuse=infinity:\
+#	:stacksize=4M:\
+#	:filesize=8M:\
+#	:memoryuse=16M:\
+#	:openfiles=32:\
+#	:maxproc=48:\
+#	:tc=standard:
+#
+#
+##
+## Staff users - few restrictions and allow login anytime
+##
+#staff:\
+#	:ignorenologin:\
+#	:ignoretime:\
+#	:requirehome@:\
+#	:accounted@:\
+#	:path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
+#	:umask=022:\
+#	:tc=standard:
+#
+#
+##
+## root - fallback for root logins
+##
+#root:\
+#	:path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
+#	:cputime=infinity:\
+#	:datasize=infinity:\
+#	:stacksize=infinity:\
+#	:memorylocked=infinity:\
+#	:memoryuse=infinity:\
+#	:filesize=infinity:\
+#	:coredumpsize=infinity:\
+#	:openfiles=infinity:\
+#	:maxproc=infinity:\
+#	:memoryuse-cur=32M:\
+#	:maxproc-cur=64:\
+#	:openfiles-cur=1024:\
+#	:priority=0:\
+#	:requirehome@:\
+#	:umask=022:\
+#	:tc=auth-root-defaults:
+#
+#
+##
+## Settings used by /etc/rc
+##
+#daemon:\
+#	:coredumpsize@:\
+#	:coredumpsize-cur=0:\
+#	:datasize=infinity:\
+#	:datasize-cur@:\
+#	:maxproc=512:\
+#	:maxproc-cur@:\
+#	:memoryuse-cur=64M:\
+#	:memorylocked-cur=64M:\
+#	:openfiles=1024:\
+#	:openfiles-cur@:\
+#	:stacksize=16M:\
+#	:stacksize-cur@:\
+#	:tc=default:
+#
+#
+##
+## Settings used by news subsystem
+##
+#news:\
+#	:path=/usr/local/news/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
+#	:cputime=infinity:\
+#	:filesize=128M:\
+#	:datasize-cur=64M:\
+#	:stacksize-cur=32M:\
+#	:coredumpsize-cur=0:\
+#	:maxmemorysize-cur=128M:\
+#	:memorylocked=32M:\
+#	:maxproc=128:\
+#	:openfiles=256:\
+#	:tc=default:
+#
+#
+##
+## The dialer class should be used for a dialup PPP account
+## Welcome messages/news suppressed
+##
+#dialer:\
+#	:hushlogin:\
+#	:requirehome@:\
+#	:cputime=unlimited:\
+#	:filesize=2M:\
+#	:datasize=2M:\
+#	:stacksize=4M:\
+#	:coredumpsize=0:\
+#	:memoryuse=4M:\
+#	:memorylocked=1M:\
+#	:maxproc=16:\
+#	:openfiles=32:\
+#	:tc=standard:
+#
+#
+##
+## Site full-time 24/7 PPP connection
+## - no time accounting, restricted to access via dialin lines
+##
+#site:\
+#	:ignoretime:\
+#	:passwordtime@:\
+#	:refreshtime@:\
+#	:refreshperiod@:\
+#	:sessionlimit@:\
+#	:autodelete@:\
+#	:expireperiod@:\
+#	:graceexpire@:\
+#	:gracetime@:\
+#	:warnexpire@:\
+#	:warnpassword@:\
+#	:idletime@:\
+#	:sessiontime@:\
+#	:daytime@:\
+#	:weektime@:\
+#	:monthtime@:\
+#	:warntime@:\
+#	:accounted@:\
+#	:tc=dialer:\
+#	:tc=staff:
+#
+#
+##
+## Example standard accounting entries for subscriber levels
+##
+#
+#subscriber|Subscribers:\
+#	:accounted:\
+#	:refreshtime=180d:\
+#	:refreshperiod@:\
+#	:sessionlimit@:\
+#	:autodelete=30d:\
+#	:expireperiod=180d:\
+#	:graceexpire=7d:\
+#	:gracetime=10m:\
+#	:warnexpire=7d:\
+#	:warnpassword=7d:\
+#	:idletime=30m:\
+#	:sessiontime=4h:\
+#	:daytime=6h:\
+#	:weektime=40h:\
+#	:monthtime=120h:\
+#	:warntime=4h:\
+#	:tc=standard:
+#
+#
+##
+## Subscriber accounts. These accounts have their login times
+## accounted and have access limits applied.
+##
+#subppp|PPP Subscriber Accounts:\
+#	:tc=dialer:\
+#	:tc=subscriber:
+#
+#
+#subshell|Shell Subscriber Accounts:\
+#	:tc=subscriber:
+#
+##
+## If you want some of the accounts to use traditional UNIX DES based
+## password hashes.
+##
+#des_users:\
+#	:passwd_format=des:\
+#	:tc=default:

Property changes on: head/usr.bin/login/login.conf
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Index: head/usr.bin/login/motd
===================================================================
--- head/usr.bin/login/motd	(nonexistent)
+++ head/usr.bin/login/motd	(revision 338399)
@@ -0,0 +1,21 @@
+FreeBSD ?.?.?  (UNKNOWN)
+
+Welcome to FreeBSD!
+
+Release Notes, Errata: https://www.FreeBSD.org/releases/
+Security Advisories:   https://www.FreeBSD.org/security/
+FreeBSD Handbook:      https://www.FreeBSD.org/handbook/
+FreeBSD FAQ:           https://www.FreeBSD.org/faq/
+Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
+FreeBSD Forums:        https://forums.FreeBSD.org/
+
+Documents installed with the system are in the /usr/local/share/doc/freebsd/
+directory, or can be installed later with:  pkg install en-freebsd-doc
+For other languages, replace "en" with a language code like de or fr.
+
+Show the version of FreeBSD installed:  freebsd-version ; uname -a
+Please include that output and any error messages when posting questions.
+Introduction to manual pages:  man man
+FreeBSD directory layout:      man hier
+
+Edit /etc/motd to change this login announcement.

Property changes on: head/usr.bin/login/motd
___________________________________________________________________
Added: fbsd:nokeywords
## -0,0 +1 ##
+y
\ No newline at end of property