Index: head/sys/arm/conf/ALPINE =================================================================== --- head/sys/arm/conf/ALPINE (revision 338115) +++ head/sys/arm/conf/ALPINE (revision 338116) @@ -1,85 +1,84 @@ # Kernel configuration for Alpine Board. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident ALPINE include "std.armv7" include "../annapurna/alpine/std.alpine" makeoptions MODULES_OVERRIDE="" makeoptions WERROR="-Werror" options SCHED_4BSD # 4BSD scheduler options SMP # Enable multiple cores options PLATFORM # Interrupt controller device gic -options INTRNG # Annapurna Alpine drivers device al_ccu # Alpine Cache Coherency Unit device al_nb_service # Alpine North Bridge Service device al_iofic # I/O Fabric Interrupt Controller device al_serdes # Serializer/Deserializer device al_udma # Universal DMA # Pseudo devices device loop device random device pty device md device gpio # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial ports device uart # PCI/PCIE device pci device pci_host_generic device al_pci # Annapurna Alpine PCI-E # Ethernet device ether device mii device bpf device al_eth # Annapurna Alpine Ethernet NIC options DEVICE_POLLING # USB ethernet support, requires miibus device miibus #FDT options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=annapurna-alpine.dts Index: head/sys/arm/conf/ARMADA38X =================================================================== --- head/sys/arm/conf/ARMADA38X (revision 338115) +++ head/sys/arm/conf/ARMADA38X (revision 338116) @@ -1,103 +1,102 @@ # # Kernel configuration for Marvell Armada38x # # $FreeBSD$ # include "../mv/armada38x/std.armada38x" include "std.armv7" ident ARMADA38X options SOC_MV_ARMADA38X makeoptions WERROR="-Werror" makeoptions MODULES_EXTRA="dtb/mv" options MD_ROOT #makeoptions MFS_IMAGE=/path/to/miniroot #options ROOTDEVNAME=\"ufs:md0\" options ROOTDEVNAME=\"/dev/da0s1a\" options SCHED_ULE # ULE scheduler options SMP options VM_KMEM_SIZE_MAX=0x9CCD000 # Pseudo devices device random device pty device loop device md # Serial ports device uart device uart_snps # Network device ether device vlan device mii device bpf device re device mdio device etherswitch device e6000sw device neta # PCI device pci # Interrupt controllers device gic -options INTRNG # Timers device mpcore_timer # USB device usb device ehci device xhci device umass device scbus device pass device da # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # SATA device ahci # I2C device iic device iicbus device twsi # Wireless NIC cards device wlan # 802.11 support device ath # Atheros NIC's device ath_pci # Atheros pci/cardbus glue device ath_hal device ath_rate_sample options ATH_ENABLE_11N # CESA device cesa device crypto device cryptodev # L2 Cache device pl310 options PLATFORM # FDT options FDT # GPIO device gpio device gpioled Index: head/sys/arm/conf/ARMADAXP =================================================================== --- head/sys/arm/conf/ARMADAXP (revision 338115) +++ head/sys/arm/conf/ARMADAXP (revision 338116) @@ -1,94 +1,91 @@ # # Custom kernel for Marvell Armada XP # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ -# TODO: Port to INTRNG #NO_UNIVERSE ident MV-88F78XX0 include "std.armv7" include "../mv/armadaxp/std.mv78x60" options SOC_MV_ARMADAXP makeoptions WERROR="-Werror" options SCHED_ULE # ULE scheduler options SMP # Enable multiple cores # NFS root from boopt/dhcp options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=mge0 options ROOTDEVNAME=\"ufs:/dev/da0p1\" options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Pseudo devices device random device pty device loop device md # USB device usb device ehci device umass device scbus device pass device da # SATA device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus device twsi #Network device ether device mge # Marvell Gigabit Ethernet controller device mii device mdio device e1000phy device bpf options DEVICE_POLLING device vlan #PCI/PCIE device pci # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=db78460.dts - -options INTRNG options PLATFORM Index: head/sys/arm/conf/BEAGLEBONE =================================================================== --- head/sys/arm/conf/BEAGLEBONE (revision 338115) +++ head/sys/arm/conf/BEAGLEBONE (revision 338116) @@ -1,135 +1,133 @@ # # BEAGLEBONE -- Custom configuration for the BeagleBone ARM development # platforms, check out http://www.beagleboard.org/bone and # http://www.beagleboard.org/black. This kernel config file is used for the # original BeagleBone and the BeagleBone Black. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident BEAGLEBONE include "std.armv7" include "../ti/am335x/std.am335x" makeoptions MODULES_EXTRA="dtb/am335x am335x_dmtpps" -options INTRNG - options SCHED_4BSD # 4BSD scheduler options PLATFORM # NFS server support #options NFSD # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:mmcsd0s2\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c device am335x_pmic # AM335x Power Management IC (TPC65217) device am335x_rtc # RTC support (power management only) #define am335x_dmtpps # Pulse Per Second capture driver # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # GPIO device gpio device gpioled device gpiobacklight # SPI device ti_spi device spibus # ADC support device ti_adc # Watchdog support # If we don't enable the watchdog driver, the system could potentially # reboot automatically because the boot loader might have enabled the # watchdog. device ti_wdt # TI Programmable Realtime Unit support device ti_pruss # Mailbox support device ti_mbox # PMU support (for CCNT). device pmu # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device musb device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smscphy device cpsw device bpf # USB Ethernet support, requires miibus device miibus # Device mode support device usb_template # Control of the gadget # Pinmux device fdt_pinctrl # Flattened Device Tree options FDT # Configure using FDT/DTB data # Comment following lines for boot console on serial port device vt device videomode device hdmi device ums device ukbd device kbdmux # Uncomment to enable evdev support for ti_adc # options EVDEV_SUPPORT Index: head/sys/arm/conf/EFIKA_MX =================================================================== --- head/sys/arm/conf/EFIKA_MX (revision 338115) +++ head/sys/arm/conf/EFIKA_MX (revision 338116) @@ -1,135 +1,133 @@ # # Kernel configuration for Efika MX Smarttop/Smartbook boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EFIKA_MX include "std.armv7" include "../freescale/imx/std.imx51" makeoptions WITHOUT_MODULES="ahc" options SOC_IMX51 options SCHED_4BSD # 4BSD scheduler #options MD_ROOT # MD is a potential root device #options NFSD # Network Filesystem Server options PLATFORM options INCLUDE_CONFIG_FILE # Include this file in kernel # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # Serial (COM) ports device uart # Multi-uart driver device ata device atapci # Only for helper functions device imxata device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=efikamx.dts device fdt_pinctrl # FDT pinmux driver # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device ukbd # Allow keyboard like HIDs to control console device ums - -options INTRNG Index: head/sys/arm/conf/EXYNOS5.common =================================================================== --- head/sys/arm/conf/EXYNOS5.common (revision 338115) +++ head/sys/arm/conf/EXYNOS5.common (revision 338116) @@ -1,127 +1,126 @@ # # Kernel configuration for Samsung Exynos 5 SoC. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ makeoptions WERROR="-Werror" include "std.armv7" options SCHED_ULE # ULE scheduler options PLATFORM # Platform based SoC options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options TCP_HHOOK # hhook(9) framework for TCP options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:/dev/da0\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc # Interrupt controller device gic -options INTRNG # ARM Generic Timer device generic_timer # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb #device musb device ehci #device ohci device xhci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus # SPI device spibus device exynos_spi # Ethernet device ether device mii device smsc device smscphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter Index: head/sys/arm/conf/GENERIC =================================================================== --- head/sys/arm/conf/GENERIC (revision 338115) +++ head/sys/arm/conf/GENERIC (revision 338116) @@ -1,270 +1,269 @@ # # GENERICV6 -- Generic(ish) kernel config. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident GENERIC cpu CPU_CORTEXA cpu CPU_MV_PJ4B options SMP_ON_UP machine arm armv7 makeoptions CONF_CFLAGS="-march=armv7a" include "std.armv7" files "../allwinner/files.allwinner" files "../allwinner/files.allwinner_up" files "../allwinner/a10/files.a10" files "../allwinner/a13/files.a13" files "../allwinner/a20/files.a20" files "../allwinner/a31/files.a31" files "../allwinner/a33/files.a33" files "../allwinner/a83t/files.a83t" files "../allwinner/h3/files.h3" files "../broadcom/bcm2835/files.bcm2836" files "../broadcom/bcm2835/files.bcm283x" files "../freescale/imx/files.imx6" files "../mv/files.arm7" files "../nvidia/tegra124/files.tegra124" files "../qemu/files.qemu" files "../ti/files.ti" files "../ti/am335x/files.am335x" files "../ti/omap4/files.omap4" files "../xilinx/files.zynq7" options SOC_ALLWINNER_A10 options SOC_ALLWINNER_A13 options SOC_ALLWINNER_A20 options SOC_ALLWINNER_A31 options SOC_ALLWINNER_A31S options SOC_ALLWINNER_A33 options SOC_ALLWINNER_A83T options SOC_ALLWINNER_H2PLUS options SOC_ALLWINNER_H3 options SOC_BCM2836 options SOC_MV_ARMADA38X options SOC_MV_ARMADAXP options SOC_TI_AM335X options SOC_OMAP4 options SCHED_ULE # ULE scheduler options SMP # Enable multiple cores options PLATFORM options LINUX_BOOT_ABI # EXT_RESOURCES pseudo devices options EXT_RESOURCES device clk device phy device hwreset device nvmem device regulator device syscon # CPU frequency control device cpufreq # Interrupt controller -options INTRNG device gic # PMU support (for CCNT). device pmu # ARM Generic Timer device generic_timer device mpcore_timer # MMC/SD/SDIO Card slot support device sdhci # SD controller device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards # ATA controllers device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers # PCI options NEW_PCIB device pci device pci_host_generic # PCI NICs device re # RealTek 8139C+/8169/8169S/8110S # VirtIO device virtio device virtio_mmio device virtio_pci device virtio_blk device vtnet # Console and misc device uart device uart_ns8250 device uart_snps device pl011 device pty device snp device md # Memory "disks" device random # Entropy device device firmware # firmware assist module device pl310 # PL310 L2 cache controller device psci # I2C support device iicbus device iic device twsi device rsb # Allwinner Reduced Serial Bus device p2wi # Allwinner Push-Pull Two Wire device axp209 # AXP209 Power Management Unit device axp81x # AXP813/818 Power Management Unit device bcm2835_bsc device fsliic # Freescale i2c/iic device icee # AT24Cxxx and compatible EEPROMs device sy8106a # SY8106A Buck Regulator device ti_i2c device am335x_pmic # AM335x Power Management IC (TPC65217) device am335x_rtc # RTC support (power management only) device twl # TI TWLX0X0/TPS659x0 Power Management device twl_vreg # twl voltage regulation device twl_clks # twl external clocks # i2c RTCs device ds1307 # Dallas DS1307 RTC and compatible device ds13rtc # All Dallas/Maxim DS13xx RTCs device ds1672 # Dallas DS1672 RTC device ds3231 # Dallas DS3231 RTC + temperature device nxprtc # NXP RTCs: PCA/PFC212x PCA/PCF85xx device s35390a # Seiko s3539x RTCs # GPIO device gpio device gpiobacklight device gpioled device gpioregulator # EVDEV support device evdev # input event device support options EVDEV_SUPPORT # evdev support in legacy drivers device uinput # install /dev/uinput cdev device aw_cir # SPI device spibus device spigen device bcm2835_spi device ti_spi # ADC support device ti_adc # Watchdog support # If we don't enable the watchdog driver, the BealeBone could potentially # reboot automatically because the boot loader might have enabled the # watchdog. device ti_wdt device imxwdt # Watchdog. WARNING: can't be disabled!!! device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb device uhci device ohci device ehci device xhci device dwcotg # DWC OTG controller device musb device axe # USB-Ethernet device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device ukbd # Allow keyboard like HIDs to control console device firmware # Device mode support device usb_template # Control of the gadget # Ethernet device loop device ether device vlan # 802.1Q VLAN support device bpf device mii device mdio device etherswitch device e6000sw # Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus device awg # 10/100/1000 integrated EMAC controller device cpsw # TI Common Platform Ethernet Switch (CPSW) device cgem # Zynq-7000 gig ethernet device device dwc # 10/100/1000 integrated GMAC controller device emac # 10/100 integrated EMAC controller device ffec # Freescale Fast Ethernet Controller device neta # Marvell 10/100/1000 Network controller device smsc # SMSC LAN91C111 # Sound support device sound # Framebuffer support device vt device kbdmux device ums device videomode device hdmi device vchiq # Pinmux device fdt_pinctrl # TI Programmable Realtime Unit support device ti_pruss # Mailbox support device ti_mbox # DMA controller device fslsdma device ti_sdma # Extensible Firmware Interface options EFI # Marvell Cryptographic Engine and Security Accelerator device cesa device crypto device cryptodev # imx6 on-chip RTC device imx6_snvs # On-chip RTC # Flattened Device Tree options FDT # Configure using FDT/DTB data makeoptions MODULES_EXTRA="dtb/allwinner dtb/am335x dtb/imx6 dtb/nvidia dtb/rpi dtb/zynq dtb/omap4" Index: head/sys/arm/conf/IMX53 =================================================================== --- head/sys/arm/conf/IMX53 (revision 338115) +++ head/sys/arm/conf/IMX53 (revision 338116) @@ -1,123 +1,121 @@ # # Kernel configuration for i.MX53 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX53 include "std.armv7" include "../freescale/imx/std.imx53" options SOC_IMX53 options SCHED_4BSD # 4BSD scheduler #options NFSD # Network Filesystem Server options PLATFORM options INCLUDE_CONFIG_FILE # Include this file in kernel # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver device ata device atapci # Only for helper functions device imxata device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # MMC #device sdhci # SD controller #device mmc # SD/MMC protocol #device mmcsd # SDCard disk device # Flattened Device Tree options FDT # Configure using FDT/DTB data makeoptions MODULES_EXTRA="dtb/imx5 imx" device fdt_pinctrl # FDT pinmux driver - -options INTRNG Index: head/sys/arm/conf/IMX6 =================================================================== --- head/sys/arm/conf/IMX6 (revision 338115) +++ head/sys/arm/conf/IMX6 (revision 338116) @@ -1,130 +1,128 @@ # # Kernel configuration for Freescale i.MX6 systems. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX6 include "std.armv7" include "../freescale/imx/std.imx6" -options INTRNG - options SOC_IMX6 options SCHED_ULE # ULE scheduler #options NFSD # Network Filesystem Server options INCLUDE_CONFIG_FILE # Include this file in kernel options PLATFORM options SMP # Enable multiple cores # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 # U-Boot stuff lives on slice 1, FreeBSD on slice 2. options ROOTDEVNAME=\"ufs:mmcsd0s2a\" # Interrupt controller device gic # Cache controller device pl310 # PL310 L2 cache controller # ARM MPCore timer device mpcore_timer # Pseudo devices. device loop # Network loopback device random # Entropy device device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module device ether # Ethernet support device miibus # Required for ethernet device bpf # Berkeley packet filter (required for DHCP) # General-purpose input/output device gpio # Serial (COM) ports device uart # Multi-uart driver # SDCard device sdhci # SD controller device mmc # SD/MMC protocol device mmcsd # SDCard disk device # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # ATA controllers device ahci # AHCI-compatible SATA controllers # USB support device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB modems #device ukbd # Allow keyboard like HIDs to control console #device ums # USB mouse # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm device vt device kbdmux device ukbd device videomode device hdmi # Flattened Device Tree options FDT # Configure using FDT/DTB data makeoptions MODULES_EXTRA="dtb/imx6 imx" device fdt_pinctrl # FDT pinmux driver # SoC-specific devices device ffec # Freescale Fast Ethernet Controller device fsliic # Freescale i2c/iic device iic # iic protocol device iicbus # iic bus device imx6_snvs # On-chip RTC device imxwdt # Watchdog. WARNING: can't be disabled!!! Index: head/sys/arm/conf/ODROIDC1 =================================================================== --- head/sys/arm/conf/ODROIDC1 (revision 338115) +++ head/sys/arm/conf/ODROIDC1 (revision 338116) @@ -1,32 +1,31 @@ # ODROIDC1 -- Custom configuration for the HardKernel ODROID-C1 SBC # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE include "AML8726" ident ODROIDC1 options SMP # Enable multiple cores # Interrupt controller device gic -options INTRNG options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=odroidc1.dts Index: head/sys/arm/conf/PANDABOARD =================================================================== --- head/sys/arm/conf/PANDABOARD (revision 338115) +++ head/sys/arm/conf/PANDABOARD (revision 338116) @@ -1,116 +1,115 @@ # # PANDABOARD -- Custom configuration for the PandaBoard ARM development # platform, check out www.pandaboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident PANDABOARD # This probably wants to move somewhere else. Maybe we can create a basic # OMAP4340 config, then make a PANDABOARD config that includes the basic one, # adds the start addresses and custom devices plus pulls in this hints file. hints "PANDABOARD.hints" include "std.armv7" include "../ti/omap4/std.omap4" makeoptions MODULES_EXTRA=dtb/omap4 options SCHED_ULE # ULE scheduler options PLATFORM options SMP # Enable multiple cores # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 device fdt_pinctrl # Interrupt controller device gic -options INTRNG # ARM MPCore timer device mpcore_timer # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device device pl310 # PL310 L2 cache controller # GPIO device gpio device gpioled # The following enables MFS as root, this seems similar to an initramfs or initrd # as used in Linux. #options MD_ROOT #options MD_ROOT_SIZE=7560 # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smc device smcphy device bpf # USB Ethernet support, requires miibus device miibus #device axe # ASIX Electronics USB Ethernet device smsc # SMSC LAN95xx USB Ethernet # OMAP-specific devices device ti_sdma device twl device twl_vreg device twl_clks # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=pandaboard.dts Index: head/sys/arm/conf/RK3188 =================================================================== --- head/sys/arm/conf/RK3188 (revision 338115) +++ head/sys/arm/conf/RK3188 (revision 338116) @@ -1,97 +1,96 @@ # # Kernel configuration for Rockchip RK3188 systems. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident RK3188 include "std.armv7" include "../rockchip/std.rk30xx" options SOC_ROCKCHIP_RK3188 options SCHED_ULE # ULE scheduler options SMP # Enable multiple cores options PLATFORM # Root mount from MMC/SD card options ROOTDEVNAME=\"ufs:/dev/mmcsd0\" # Interrupt controller device gic -options INTRNG # ARM MPCore timer device mpcore_timer # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc # Console and misc device uart device uart_snps device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb device dwcotg # DWC OTG controller device umass # Ethernet device loop device ether device mii device bpf # Wireless NIC cards options IEEE80211_DEBUG options IEEE80211_AMPDU_AGE options IEEE80211_SUPPORT_MESH options IEEE80211_SUPPORT_TDMA device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device firmware # Used by the above # USB Ethernet support, requires miibus device miibus device udav # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/RPI-B =================================================================== --- head/sys/arm/conf/RPI-B (revision 338115) +++ head/sys/arm/conf/RPI-B (revision 338116) @@ -1,101 +1,99 @@ # # RPI-B -- Custom configuration for the Raspberry Pi # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident RPI-B include "std.armv6" include "../broadcom/bcm2835/std.rpi" include "../broadcom/bcm2835/std.bcm2835" -options INTRNG - options SCHED_4BSD # 4BSD scheduler options PLATFORM # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 #options ROOTDEVNAME=\"ufs:mmcsd0s2\" device bpf device loop device ether device uart device pty device snp device pl011 # Device mode support device usb_template # Control of the gadget # Comment following lines for boot console on serial port device vt device kbdmux device ukbd device sdhci device mmc device mmcsd device gpio device gpioled # I2C device iic device iicbus device bcm2835_bsc device md device random # Entropy device # USB support device usb device dwcotg # DWC OTG controller # USB storage support device scbus device da device umass # USB ethernet support device smcphy device mii device smsc # SPI device spibus device bcm2835_spi device vchiq device sound device fdt_pinctrl # Flattened Device Tree options FDT # Configure using FDT/DTB data # Note: DTB is normally loaded and modified by RPi boot loader, then # handed to kernel via U-Boot and ubldr. #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=rpi.dts makeoptions MODULES_EXTRA="dtb/rpi rpi_ft5406" Index: head/sys/arm/conf/RPI2 =================================================================== --- head/sys/arm/conf/RPI2 (revision 338115) +++ head/sys/arm/conf/RPI2 (revision 338116) @@ -1,104 +1,102 @@ # # RPI2 -- Custom configuration for the Raspberry Pi 2 # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ # #NO_UNIVERSE ident RPI2 include "std.armv7" include "../broadcom/bcm2835/std.rpi" include "../broadcom/bcm2835/std.bcm2836" -options INTRNG - options SCHED_ULE # ULE scheduler options SMP # Enable multiple cores options PLATFORM # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:mmcsd0s2\" # ARM Generic Timer device generic_timer device bpf device loop device ether device uart device pty device snp device pl011 # Comment following lines for boot console on serial port device vt device kbdmux device ukbd device sdhci device mmc device mmcsd device gpio device gpioled # I2C device iic device iicbus device bcm2835_bsc device md device random # Entropy device # USB support device usb device dwcotg # DWC OTG controller # USB storage support device scbus device da device umass # USB ethernet support device smcphy device mii device smsc # SPI device spibus device bcm2835_spi device vchiq device sound device fdt_pinctrl # Flattened Device Tree options FDT # Configure using FDT/DTB data # Note: DTB is normally loaded and modified by RPi boot loader, then # handed to kernel via U-Boot and ubldr. #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=rpi2.dts makeoptions MODULES_EXTRA="dtb/rpi rpi_ft5406" Index: head/sys/arm/conf/SOCFPGA =================================================================== --- head/sys/arm/conf/SOCFPGA (revision 338115) +++ head/sys/arm/conf/SOCFPGA (revision 338116) @@ -1,104 +1,103 @@ # # Kernel configuration for Altera SOCFPGA development kits. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident SOCFPGA include "std.armv7" include "../altera/socfpga/std.socfpga" makeoptions MODULES_OVERRIDE="" makeoptions WERROR="-Werror" options SCHED_ULE # ULE scheduler options PLATFORM # Platform based SoC options SMP # Enable multiple cores options SOC_ALTERA_ARRIA10 options SOC_ALTERA_CYCLONE5 # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # Interrupt controller device gic -options INTRNG # ARM MPCore timer device mpcore_timer # DMA support device xdma device pl330 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb device dwcotg device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Serial ports device uart device uart_snps # I2C (TWSI) device iic device iicbus # SPI device spibus device cqspi device n25q # Ethernet device ether device mii device smsc device smscphy device dwc device micphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/VERSATILEPB =================================================================== --- head/sys/arm/conf/VERSATILEPB (revision 338115) +++ head/sys/arm/conf/VERSATILEPB (revision 338116) @@ -1,77 +1,76 @@ # # VERSATILEPB - Configuration for QEMU version of Versatile Platform Board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VERSATILEPB machine arm armv6 cpu CPU_ARM1176 include "std.armv6" files "../versatile/files.versatile" makeoptions MODULES_OVERRIDE="" options KERNVIRTADDR=0xc0100000 makeoptions KERNVIRTADDR=0xc0100000 options SCHED_4BSD # 4BSD scheduler options LINUX_BOOT_ABI # Process metadata passed from Linux boot loaders options ROOTDEVNAME=\"ufs:da0s1a\" device bpf device loop device mii device mii_bitbang device smc device smcphy device ether device uart device pl011 device pl190 device pty device snp device pci # SCSI Controllers device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) # NOTE: serial console is disabled if syscons enabled # Comment following lines for headless setup device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device md device random # Entropy device -options INTRNG options PLATFORM # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=versatile-pb.dts Index: head/sys/arm/conf/VSATV102 =================================================================== --- head/sys/arm/conf/VSATV102 (revision 338115) +++ head/sys/arm/conf/VSATV102 (revision 338116) @@ -1,32 +1,31 @@ # VSATV102 -- Custom configuration for the Visson ATV-102 media player # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE include "AML8726" ident VSATV102 options SMP # Enable multiple cores # Interrupt controller device gic -options INTRNG options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=vsatv102-m6.dts Index: head/sys/arm/conf/VYBRID =================================================================== --- head/sys/arm/conf/VYBRID (revision 338115) +++ head/sys/arm/conf/VYBRID (revision 338116) @@ -1,115 +1,114 @@ # # Kernel configuration for Vybrid Family boards. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VYBRID include "std.armv7" include "../freescale/vybrid/std.vybrid" makeoptions WERROR="-Werror" options SCHED_4BSD # 4BSD scheduler options PLATFORM # Platform based SoC #options NANDFS # NAND Filesystem #options SMP # Enable multiple cores # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 #options ROOTDEVNAME=\"nfs:10.5.0.1:/tftpboot/cosmic\" #options ROOTDEVNAME=\"nandfs:/dev/gnand0s.root\" options ROOTDEVNAME=\"ufs:/dev/da0\" options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Interrupt controller device gic -options INTRNG # ARM MPCore timer device mpcore_timer # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs device nand # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device ffec # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter device sound # SPI device spibus device vf_spi # Framebuffer device vt device kbdmux device ukbd # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/ZEDBOARD =================================================================== --- head/sys/arm/conf/ZEDBOARD (revision 338115) +++ head/sys/arm/conf/ZEDBOARD (revision 338116) @@ -1,81 +1,80 @@ # # ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based # ZedBoard (www.zedboard.org) and similar Zynq boards. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident ZEDBOARD include "std.armv7" include "../xilinx/std.zynq7" makeoptions MODULES_EXTRA="dtb/zynq" options SCHED_ULE # ULE scheduler options PLATFORM # Platform based SoC #options NFSSD # Network Filesystem Server options SMP # Enable multiple cores # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 options ROOTDEVNAME=\"ufs:mmcsd0s2a\" # Interrupt controller device gic -options INTRNG # Cache controller device pl310 # PL310 L2 cache controller # ARM MPCore timer device mpcore_timer device loop device random device ether device cgem # Zynq-7000 gig ethernet device device mii device e1000phy device rgephy # Zybo uses Realtek RTL8211E device pty device uart device gpio device md device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci device bpf # Berkeley packet filter # USB support device usb device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device axe # USB-Ethernet # Flattened Device Tree options FDT # Configure using FDT/DTB data #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=zedboard.dts Index: head/sys/arm/conf/std.armv6 =================================================================== --- head/sys/arm/conf/std.armv6 (revision 338115) +++ head/sys/arm/conf/std.armv6 (revision 338116) @@ -1,82 +1,83 @@ # Standard kernel config items for all ARMv6 systems. # # $FreeBSD$ options HZ=1000 options ARM_L2_PIPT # Only L2 PIPT is supported +options INTRNG # All arm systems use INTRNG these days options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET options INET # InterNETworking options INET6 # IPv6 communications protocols options TCP_HHOOK # hhook(9) framework for TCP device crypto # core crypto support options IPSEC # IP (v4/v6) security options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options MAC # Support for Mandatory Access Control (MAC) options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options COMPAT_FREEBSD11 # Compatible with FreeBSD11 # DTrace support options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data makeoptions WITH_CTF=1 # Debugging support. Always need this: makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): options DDB # Support DDB #options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones options ALT_BREAK_TO_DEBUGGER # Enter debugger on keyboard escape sequence options USB_DEBUG # Enable usb debug support code # Optional extras, never enabled by default: #options BOOTVERBOSE #options DEBUG # May result in extreme spewage #options KTR #options KTR_COMPILE=KTR_ALL #options KTR_ENTRIES=16384 #options KTR_MASK=(KTR_SPARE2) #options KTR_VERBOSE=0 #options USB_REQ_DEBUG #options USB_VERBOSE #options VERBOSE_SYSINIT # Enable verbose sysinit messages Index: head/sys/arm/conf/std.armv7 =================================================================== --- head/sys/arm/conf/std.armv7 (revision 338115) +++ head/sys/arm/conf/std.armv7 (revision 338116) @@ -1,82 +1,82 @@ # Standard kernel config items for all ARMv7 systems. # # $FreeBSD$ options HZ=1000 options ARM_L2_PIPT # Only L2 PIPT is supported +options INTRNG # All arm systems use INTRNG these days options PREEMPTION # Enable kernel thread preemption options VIMAGE # Subsystem virtualization, e.g. VNET options INET # InterNETworking options INET6 # IPv6 communications protocols options TCP_HHOOK # hhook(9) framework for TCP device crypto # core crypto support options IPSEC # IP (v4/v6) security options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options MAC # Support for Mandatory Access Control (MAC) options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options COMPAT_FREEBSD11 # Compatible with FreeBSD11 # DTrace support options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data makeoptions WITH_CTF=1 # Debugging support. Always need this: makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options KDB # Enable kernel debugger support. options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): options DDB # Support DDB #options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones options ALT_BREAK_TO_DEBUGGER # Enter debugger on keyboard escape sequence options USB_DEBUG # Enable usb debug support code # Optional extras, never enabled by default: #options BOOTVERBOSE #options DEBUG # May result in extreme spewage #options KTR #options KTR_COMPILE=KTR_ALL #options KTR_ENTRIES=16384 #options KTR_MASK=(KTR_SPARE2) #options KTR_VERBOSE=0 #options USB_REQ_DEBUG #options USB_VERBOSE #options VERBOSE_SYSINIT # Enable verbose sysinit messages - Index: head/sys/arm/nvidia/tegra124/std.tegra124 =================================================================== --- head/sys/arm/nvidia/tegra124/std.tegra124 (revision 338115) +++ head/sys/arm/nvidia/tegra124/std.tegra124 (revision 338116) @@ -1,8 +1,6 @@ # $FreeBSD$ cpu CPU_CORTEXA machine arm armv7 makeoptions CONF_CFLAGS="-march=armv7a" -options INTRNG - files "../nvidia/tegra124/files.tegra124"