Index: head/stand/efi/loader/main.c =================================================================== --- head/stand/efi/loader/main.c (revision 335229) +++ head/stand/efi/loader/main.c (revision 335230) @@ -1,1046 +1,1056 @@ /*- * Copyright (c) 2008-2010 Rui Paulo * Copyright (c) 2006 Marcel Moolenaar * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef EFI_ZFS_BOOT #include #include "efizfs.h" #endif #include "loader_efi.h" struct arch_switch archsw; /* MI/MD interface boundary */ EFI_GUID acpi = ACPI_TABLE_GUID; EFI_GUID acpi20 = ACPI_20_TABLE_GUID; EFI_GUID devid = DEVICE_PATH_PROTOCOL; EFI_GUID imgid = LOADED_IMAGE_PROTOCOL; EFI_GUID mps = MPS_TABLE_GUID; EFI_GUID netid = EFI_SIMPLE_NETWORK_PROTOCOL; EFI_GUID smbios = SMBIOS_TABLE_GUID; EFI_GUID smbios3 = SMBIOS3_TABLE_GUID; EFI_GUID dxe = DXE_SERVICES_TABLE_GUID; EFI_GUID hoblist = HOB_LIST_TABLE_GUID; EFI_GUID lzmadecomp = LZMA_DECOMPRESSION_GUID; EFI_GUID mpcore = ARM_MP_CORE_INFO_TABLE_GUID; EFI_GUID esrt = ESRT_TABLE_GUID; EFI_GUID memtype = MEMORY_TYPE_INFORMATION_TABLE_GUID; EFI_GUID debugimg = DEBUG_IMAGE_INFO_TABLE_GUID; EFI_GUID fdtdtb = FDT_TABLE_GUID; EFI_GUID inputid = SIMPLE_TEXT_INPUT_PROTOCOL; /* * Number of seconds to wait for a keystroke before exiting with failure * in the event no currdev is found. -2 means always break, -1 means * never break, 0 means poll once and then reboot, > 0 means wait for * that many seconds. "fail_timeout" can be set in the environment as * well. */ static int fail_timeout = 5; static bool has_keyboard(void) { EFI_STATUS status; EFI_DEVICE_PATH *path; EFI_HANDLE *hin, *hin_end, *walker; UINTN sz; bool retval = false; /* * Find all the handles that support the SIMPLE_TEXT_INPUT_PROTOCOL and * do the typical dance to get the right sized buffer. */ sz = 0; hin = NULL; status = BS->LocateHandle(ByProtocol, &inputid, 0, &sz, 0); if (status == EFI_BUFFER_TOO_SMALL) { hin = (EFI_HANDLE *)malloc(sz); status = BS->LocateHandle(ByProtocol, &inputid, 0, &sz, hin); if (EFI_ERROR(status)) free(hin); } if (EFI_ERROR(status)) return retval; /* * Look at each of the handles. If it supports the device path protocol, * use it to get the device path for this handle. Then see if that * device path matches either the USB device path for keyboards or the * legacy device path for keyboards. */ hin_end = &hin[sz / sizeof(*hin)]; for (walker = hin; walker < hin_end; walker++) { status = BS->HandleProtocol(*walker, &devid, (VOID **)&path); if (EFI_ERROR(status)) continue; while (!IsDevicePathEnd(path)) { /* * Check for the ACPI keyboard node. All PNP3xx nodes * are keyboards of different flavors. Note: It is * unclear of there's always a keyboard node when * there's a keyboard controller, or if there's only one * when a keyboard is detected at boot. */ if (DevicePathType(path) == ACPI_DEVICE_PATH && (DevicePathSubType(path) == ACPI_DP || DevicePathSubType(path) == ACPI_EXTENDED_DP)) { ACPI_HID_DEVICE_PATH *acpi; acpi = (ACPI_HID_DEVICE_PATH *)(void *)path; if ((EISA_ID_TO_NUM(acpi->HID) & 0xff00) == 0x300 && (acpi->HID & 0xffff) == PNP_EISA_ID_CONST) { retval = true; goto out; } /* * Check for USB keyboard node, if present. Unlike a * PS/2 keyboard, these definitely only appear when * connected to the system. */ } else if (DevicePathType(path) == MESSAGING_DEVICE_PATH && DevicePathSubType(path) == MSG_USB_CLASS_DP) { USB_CLASS_DEVICE_PATH *usb; usb = (USB_CLASS_DEVICE_PATH *)(void *)path; if (usb->DeviceClass == 3 && /* HID */ usb->DeviceSubClass == 1 && /* Boot devices */ usb->DeviceProtocol == 1) { /* Boot keyboards */ retval = true; goto out; } } path = NextDevicePathNode(path); } } out: free(hin); return retval; } static void set_currdev_devdesc(struct devdesc *currdev) { const char *devname; devname = efi_fmtdev(currdev); printf("Setting currdev to %s\n", devname); env_setenv("currdev", EV_VOLATILE, devname, efi_setcurrdev, env_nounset); env_setenv("loaddev", EV_VOLATILE, devname, env_noset, env_nounset); } static void set_currdev_devsw(struct devsw *dev, int unit) { struct devdesc currdev; currdev.d_dev = dev; currdev.d_unit = unit; set_currdev_devdesc(&currdev); } static void set_currdev_pdinfo(pdinfo_t *dp) { /* * Disks are special: they have partitions. if the parent * pointer is non-null, we're a partition not a full disk * and we need to adjust currdev appropriately. */ if (dp->pd_devsw->dv_type == DEVT_DISK) { struct disk_devdesc currdev; currdev.dd.d_dev = dp->pd_devsw; if (dp->pd_parent == NULL) { currdev.dd.d_unit = dp->pd_unit; currdev.d_slice = -1; currdev.d_partition = -1; } else { currdev.dd.d_unit = dp->pd_parent->pd_unit; currdev.d_slice = dp->pd_unit; currdev.d_partition = 255; /* Assumes GPT */ } set_currdev_devdesc((struct devdesc *)&currdev); } else { set_currdev_devsw(dp->pd_devsw, dp->pd_unit); } } static bool sanity_check_currdev(void) { struct stat st; return (stat("/boot/defaults/loader.conf", &st) == 0); } #ifdef EFI_ZFS_BOOT static bool probe_zfs_currdev(uint64_t guid) { char *devname; struct zfs_devdesc currdev; currdev.dd.d_dev = &zfs_dev; currdev.dd.d_unit = 0; currdev.pool_guid = guid; currdev.root_guid = 0; set_currdev_devdesc((struct devdesc *)&currdev); devname = efi_fmtdev(&currdev); init_zfs_bootenv(devname); return (sanity_check_currdev()); } #endif static bool try_as_currdev(pdinfo_t *hd, pdinfo_t *pp) { uint64_t guid; #ifdef EFI_ZFS_BOOT /* * If there's a zpool on this device, try it as a ZFS * filesystem, which has somewhat different setup than all * other types of fs due to imperfect loader integration. * This all stems from ZFS being both a device (zpool) and * a filesystem, plus the boot env feature. */ if (efizfs_get_guid_by_handle(pp->pd_handle, &guid)) return (probe_zfs_currdev(guid)); #endif /* * All other filesystems just need the pdinfo * initialized in the standard way. */ set_currdev_pdinfo(pp); return (sanity_check_currdev()); } static int find_currdev(EFI_LOADED_IMAGE *img) { pdinfo_t *dp, *pp; EFI_DEVICE_PATH *devpath, *copy; EFI_HANDLE h; CHAR16 *text; struct devsw *dev; int unit; uint64_t extra; #ifdef EFI_ZFS_BOOT /* * Did efi_zfs_probe() detect the boot pool? If so, use the zpool * it found, if it's sane. ZFS is the only thing that looks for * disks and pools to boot. This may change in the future, however, * if we allow specifying which pool to boot from via UEFI variables * rather than the bootenv stuff that FreeBSD uses today. */ if (pool_guid != 0) { printf("Trying ZFS pool\n"); if (probe_zfs_currdev(pool_guid)) return (0); } #endif /* EFI_ZFS_BOOT */ /* * Try to find the block device by its handle based on the * image we're booting. If we can't find a sane partition, * search all the other partitions of the disk. We do not * search other disks because it's a violation of the UEFI * boot protocol to do so. We fail and let UEFI go on to * the next candidate. */ dp = efiblk_get_pdinfo_by_handle(img->DeviceHandle); if (dp != NULL) { text = efi_devpath_name(dp->pd_devpath); if (text != NULL) { printf("Trying ESP: %S\n", text); efi_free_devpath_name(text); } set_currdev_pdinfo(dp); if (sanity_check_currdev()) return (0); if (dp->pd_parent != NULL) { dp = dp->pd_parent; STAILQ_FOREACH(pp, &dp->pd_part, pd_link) { text = efi_devpath_name(pp->pd_devpath); if (text != NULL) { printf("And now the part: %S\n", text); efi_free_devpath_name(text); } /* * Roll up the ZFS special case * for those partitions that have * zpools on them */ if (try_as_currdev(dp, pp)) return (0); } } } else { printf("Can't find device by handle\n"); } /* * Try the device handle from our loaded image first. If that * fails, use the device path from the loaded image and see if * any of the nodes in that path match one of the enumerated * handles. Currently, this handle list is only for netboot. */ if (efi_handle_lookup(img->DeviceHandle, &dev, &unit, &extra) == 0) { set_currdev_devsw(dev, unit); if (sanity_check_currdev()) return (0); } copy = NULL; devpath = efi_lookup_image_devpath(IH); while (devpath != NULL) { h = efi_devpath_handle(devpath); if (h == NULL) break; free(copy); copy = NULL; if (efi_handle_lookup(h, &dev, &unit, &extra) == 0) { set_currdev_devsw(dev, unit); if (sanity_check_currdev()) return (0); } devpath = efi_lookup_devpath(h); if (devpath != NULL) { copy = efi_devpath_trim(devpath); devpath = copy; } } free(copy); return (ENOENT); } static bool interactive_interrupt(const char *msg) { time_t now, then, last; last = 0; now = then = getsecs(); printf("%s\n", msg); if (fail_timeout == -2) /* Always break to OK */ return (true); if (fail_timeout == -1) /* Never break to OK */ return (false); do { if (last != now) { printf("press any key to interrupt reboot in %d seconds\r", fail_timeout - (int)(now - then)); last = now; } /* XXX no pause or timeout wait for char */ if (ischar()) return (true); now = getsecs(); } while (now - then < fail_timeout); return (false); } -EFI_STATUS -main(int argc, CHAR16 *argv[]) +int +parse_args(int argc, CHAR16 *argv[], bool has_kbd) { - char var[128]; - EFI_GUID *guid; int i, j, howto; bool vargood; - UINTN k; - bool has_kbd; - char *s; - EFI_DEVICE_PATH *imgpath; - CHAR16 *text; - EFI_STATUS status; - UINT16 boot_current; - size_t sz; - UINT16 boot_order[100]; - EFI_LOADED_IMAGE *img; -#if !defined(__arm__) - char buf[40]; -#endif + char var[128]; - archsw.arch_autoload = efi_autoload; - archsw.arch_getdev = efi_getdev; - archsw.arch_copyin = efi_copyin; - archsw.arch_copyout = efi_copyout; - archsw.arch_readin = efi_readin; -#ifdef EFI_ZFS_BOOT - /* Note this needs to be set before ZFS init. */ - archsw.arch_zfs_probe = efi_zfs_probe; -#endif - - /* Get our loaded image protocol interface structure. */ - BS->HandleProtocol(IH, &imgid, (VOID**)&img); - -#ifdef EFI_ZFS_BOOT - /* Tell ZFS probe code where we booted from */ - efizfs_set_preferred(img->DeviceHandle); -#endif - /* Init the time source */ - efi_time_init(); - - has_kbd = has_keyboard(); - /* - * XXX Chicken-and-egg problem; we want to have console output - * early, but some console attributes may depend on reading from - * eg. the boot device, which we can't do yet. We can use - * printf() etc. once this is done. - */ - cons_probe(); - - /* - * Initialise the block cache. Set the upper limit. - */ - bcache_init(32768, 512); - - /* * Parse the args to set the console settings, etc * boot1.efi passes these in, if it can read /boot.config or /boot/config * or iPXE may be setup to pass these in. Or the optional argument in the * boot environment was used to pass these arguments in (in which case * neither /boot.config nor /boot/config are consulted). * * Loop through the args, and for each one that contains an '=' that is * not the first character, add it to the environment. This allows * loader and kernel env vars to be passed on the command line. Convert * args from UCS-2 to ASCII (16 to 8 bit) as they are copied (though this * method is flawed for non-ASCII characters). */ howto = 0; for (i = 1; i < argc; i++) { if (argv[i][0] == '-') { for (j = 1; argv[i][j] != 0; j++) { int ch; ch = argv[i][j]; switch (ch) { case 'a': howto |= RB_ASKNAME; break; case 'd': howto |= RB_KDB; break; case 'D': howto |= RB_MULTIPLE; break; case 'h': howto |= RB_SERIAL; break; case 'm': howto |= RB_MUTE; break; case 'p': howto |= RB_PAUSE; break; case 'P': if (!has_kbd) howto |= RB_SERIAL | RB_MULTIPLE; break; case 'r': howto |= RB_DFLTROOT; break; case 's': howto |= RB_SINGLE; break; case 'S': if (argv[i][j + 1] == 0) { if (i + 1 == argc) { setenv("comconsole_speed", "115200", 1); } else { cpy16to8(&argv[i + 1][0], var, sizeof(var)); setenv("comconsole_speed", var, 1); } i++; break; } else { cpy16to8(&argv[i][j + 1], var, sizeof(var)); setenv("comconsole_speed", var, 1); break; } case 'v': howto |= RB_VERBOSE; break; } } } else { vargood = false; for (j = 0; argv[i][j] != 0; j++) { if (j == sizeof(var)) { vargood = false; break; } if (j > 0 && argv[i][j] == '=') vargood = true; var[j] = (char)argv[i][j]; } if (vargood) { var[j] = 0; putenv(var); } } } + return (howto); +} + + +EFI_STATUS +main(int argc, CHAR16 *argv[]) +{ + EFI_GUID *guid; + int howto, i; + UINTN k; + bool has_kbd; + char *s; + EFI_DEVICE_PATH *imgpath; + CHAR16 *text; + EFI_STATUS status; + UINT16 boot_current; + size_t sz; + UINT16 boot_order[100]; + EFI_LOADED_IMAGE *img; +#if !defined(__arm__) + char buf[40]; +#endif + + archsw.arch_autoload = efi_autoload; + archsw.arch_getdev = efi_getdev; + archsw.arch_copyin = efi_copyin; + archsw.arch_copyout = efi_copyout; + archsw.arch_readin = efi_readin; +#ifdef EFI_ZFS_BOOT + /* Note this needs to be set before ZFS init. */ + archsw.arch_zfs_probe = efi_zfs_probe; +#endif + + /* Get our loaded image protocol interface structure. */ + BS->HandleProtocol(IH, &imgid, (VOID**)&img); + +#ifdef EFI_ZFS_BOOT + /* Tell ZFS probe code where we booted from */ + efizfs_set_preferred(img->DeviceHandle); +#endif + /* Init the time source */ + efi_time_init(); + + has_kbd = has_keyboard(); + + /* + * XXX Chicken-and-egg problem; we want to have console output + * early, but some console attributes may depend on reading from + * eg. the boot device, which we can't do yet. We can use + * printf() etc. once this is done. + */ + cons_probe(); + + /* + * Initialise the block cache. Set the upper limit. + */ + bcache_init(32768, 512); + + howto = parse_args(argc, argv, has_kbd); bootenv_set(howto); /* * XXX we need fallback to this stuff after looking at the ConIn, ConOut and ConErr variables */ if (howto & RB_MULTIPLE) { if (howto & RB_SERIAL) setenv("console", "comconsole efi" , 1); else setenv("console", "efi comconsole" , 1); } else if (howto & RB_SERIAL) { setenv("console", "comconsole" , 1); } else setenv("console", "efi", 1); if (efi_copy_init()) { printf("failed to allocate staging area\n"); return (EFI_BUFFER_TOO_SMALL); } if ((s = getenv("fail_timeout")) != NULL) fail_timeout = strtol(s, NULL, 10); /* * Scan the BLOCK IO MEDIA handles then * march through the device switch probing for things. */ if ((i = efipart_inithandles()) == 0) { for (i = 0; devsw[i] != NULL; i++) if (devsw[i]->dv_init != NULL) (devsw[i]->dv_init)(); } else printf("efipart_inithandles failed %d, expect failures", i); printf("Command line arguments:"); for (i = 0; i < argc; i++) printf(" %S", argv[i]); printf("\n"); printf("Image base: 0x%lx\n", (u_long)img->ImageBase); printf("EFI version: %d.%02d\n", ST->Hdr.Revision >> 16, ST->Hdr.Revision & 0xffff); printf("EFI Firmware: %S (rev %d.%02d)\n", ST->FirmwareVendor, ST->FirmwareRevision >> 16, ST->FirmwareRevision & 0xffff); printf("\n%s", bootprog_info); /* Determine the devpath of our image so we can prefer it. */ text = efi_devpath_name(img->FilePath); if (text != NULL) { printf(" Load Path: %S\n", text); efi_setenv_freebsd_wcs("LoaderPath", text); efi_free_devpath_name(text); } status = BS->HandleProtocol(img->DeviceHandle, &devid, (void **)&imgpath); if (status == EFI_SUCCESS) { text = efi_devpath_name(imgpath); if (text != NULL) { printf(" Load Device: %S\n", text); efi_setenv_freebsd_wcs("LoaderDev", text); efi_free_devpath_name(text); } } boot_current = 0; sz = sizeof(boot_current); efi_global_getenv("BootCurrent", &boot_current, &sz); printf(" BootCurrent: %04x\n", boot_current); sz = sizeof(boot_order); efi_global_getenv("BootOrder", &boot_order, &sz); printf(" BootOrder:"); for (i = 0; i < sz / sizeof(boot_order[0]); i++) printf(" %04x%s", boot_order[i], boot_order[i] == boot_current ? "[*]" : ""); printf("\n"); /* * Disable the watchdog timer. By default the boot manager sets * the timer to 5 minutes before invoking a boot option. If we * want to return to the boot manager, we have to disable the * watchdog timer and since we're an interactive program, we don't * want to wait until the user types "quit". The timer may have * fired by then. We don't care if this fails. It does not prevent * normal functioning in any way... */ BS->SetWatchdogTimer(0, 0, 0, NULL); /* * Try and find a good currdev based on the image that was booted. * It might be desirable here to have a short pause to allow falling * through to the boot loader instead of returning instantly to follow * the boot protocol and also allow an escape hatch for users wishing * to try something different. */ if (find_currdev(img) != 0) if (!interactive_interrupt("Failed to find bootable partition")) return (EFI_NOT_FOUND); efi_init_environment(); setenv("LINES", "24", 1); /* optional */ for (k = 0; k < ST->NumberOfTableEntries; k++) { guid = &ST->ConfigurationTable[k].VendorGuid; #if !defined(__arm__) if (!memcmp(guid, &smbios, sizeof(EFI_GUID))) { snprintf(buf, sizeof(buf), "%p", ST->ConfigurationTable[k].VendorTable); setenv("hint.smbios.0.mem", buf, 1); smbios_detect(ST->ConfigurationTable[k].VendorTable); break; } #endif } interact(); /* doesn't return */ return (EFI_SUCCESS); /* keep compiler happy */ } COMMAND_SET(reboot, "reboot", "reboot the system", command_reboot); static int command_reboot(int argc, char *argv[]) { int i; for (i = 0; devsw[i] != NULL; ++i) if (devsw[i]->dv_cleanup != NULL) (devsw[i]->dv_cleanup)(); RS->ResetSystem(EfiResetCold, EFI_SUCCESS, 0, NULL); /* NOTREACHED */ return (CMD_ERROR); } COMMAND_SET(quit, "quit", "exit the loader", command_quit); static int command_quit(int argc, char *argv[]) { exit(0); return (CMD_OK); } COMMAND_SET(memmap, "memmap", "print memory map", command_memmap); static int command_memmap(int argc, char *argv[]) { UINTN sz; EFI_MEMORY_DESCRIPTOR *map, *p; UINTN key, dsz; UINT32 dver; EFI_STATUS status; int i, ndesc; char line[80]; static char *types[] = { "Reserved", "LoaderCode", "LoaderData", "BootServicesCode", "BootServicesData", "RuntimeServicesCode", "RuntimeServicesData", "ConventionalMemory", "UnusableMemory", "ACPIReclaimMemory", "ACPIMemoryNVS", "MemoryMappedIO", "MemoryMappedIOPortSpace", "PalCode" }; sz = 0; status = BS->GetMemoryMap(&sz, 0, &key, &dsz, &dver); if (status != EFI_BUFFER_TOO_SMALL) { printf("Can't determine memory map size\n"); return (CMD_ERROR); } map = malloc(sz); status = BS->GetMemoryMap(&sz, map, &key, &dsz, &dver); if (EFI_ERROR(status)) { printf("Can't read memory map\n"); return (CMD_ERROR); } ndesc = sz / dsz; snprintf(line, sizeof(line), "%23s %12s %12s %8s %4s\n", "Type", "Physical", "Virtual", "#Pages", "Attr"); pager_open(); if (pager_output(line)) { pager_close(); return (CMD_OK); } for (i = 0, p = map; i < ndesc; i++, p = NextMemoryDescriptor(p, dsz)) { printf("%23s %012jx %012jx %08jx ", types[p->Type], (uintmax_t)p->PhysicalStart, (uintmax_t)p->VirtualStart, (uintmax_t)p->NumberOfPages); if (p->Attribute & EFI_MEMORY_UC) printf("UC "); if (p->Attribute & EFI_MEMORY_WC) printf("WC "); if (p->Attribute & EFI_MEMORY_WT) printf("WT "); if (p->Attribute & EFI_MEMORY_WB) printf("WB "); if (p->Attribute & EFI_MEMORY_UCE) printf("UCE "); if (p->Attribute & EFI_MEMORY_WP) printf("WP "); if (p->Attribute & EFI_MEMORY_RP) printf("RP "); if (p->Attribute & EFI_MEMORY_XP) printf("XP "); if (pager_output("\n")) break; } pager_close(); return (CMD_OK); } COMMAND_SET(configuration, "configuration", "print configuration tables", command_configuration); static const char * guid_to_string(EFI_GUID *guid) { static char buf[40]; sprintf(buf, "%08x-%04x-%04x-%02x%02x-%02x%02x%02x%02x%02x%02x", guid->Data1, guid->Data2, guid->Data3, guid->Data4[0], guid->Data4[1], guid->Data4[2], guid->Data4[3], guid->Data4[4], guid->Data4[5], guid->Data4[6], guid->Data4[7]); return (buf); } static int command_configuration(int argc, char *argv[]) { char line[80]; UINTN i; snprintf(line, sizeof(line), "NumberOfTableEntries=%lu\n", (unsigned long)ST->NumberOfTableEntries); pager_open(); if (pager_output(line)) { pager_close(); return (CMD_OK); } for (i = 0; i < ST->NumberOfTableEntries; i++) { EFI_GUID *guid; printf(" "); guid = &ST->ConfigurationTable[i].VendorGuid; if (!memcmp(guid, &mps, sizeof(EFI_GUID))) printf("MPS Table"); else if (!memcmp(guid, &acpi, sizeof(EFI_GUID))) printf("ACPI Table"); else if (!memcmp(guid, &acpi20, sizeof(EFI_GUID))) printf("ACPI 2.0 Table"); else if (!memcmp(guid, &smbios, sizeof(EFI_GUID))) printf("SMBIOS Table %p", ST->ConfigurationTable[i].VendorTable); else if (!memcmp(guid, &smbios3, sizeof(EFI_GUID))) printf("SMBIOS3 Table"); else if (!memcmp(guid, &dxe, sizeof(EFI_GUID))) printf("DXE Table"); else if (!memcmp(guid, &hoblist, sizeof(EFI_GUID))) printf("HOB List Table"); else if (!memcmp(guid, &lzmadecomp, sizeof(EFI_GUID))) printf("LZMA Compression"); else if (!memcmp(guid, &mpcore, sizeof(EFI_GUID))) printf("ARM MpCore Information Table"); else if (!memcmp(guid, &esrt, sizeof(EFI_GUID))) printf("ESRT Table"); else if (!memcmp(guid, &memtype, sizeof(EFI_GUID))) printf("Memory Type Information Table"); else if (!memcmp(guid, &debugimg, sizeof(EFI_GUID))) printf("Debug Image Info Table"); else if (!memcmp(guid, &fdtdtb, sizeof(EFI_GUID))) printf("FDT Table"); else printf("Unknown Table (%s)", guid_to_string(guid)); snprintf(line, sizeof(line), " at %p\n", ST->ConfigurationTable[i].VendorTable); if (pager_output(line)) break; } pager_close(); return (CMD_OK); } COMMAND_SET(mode, "mode", "change or display EFI text modes", command_mode); static int command_mode(int argc, char *argv[]) { UINTN cols, rows; unsigned int mode; int i; char *cp; char rowenv[8]; EFI_STATUS status; SIMPLE_TEXT_OUTPUT_INTERFACE *conout; extern void HO(void); conout = ST->ConOut; if (argc > 1) { mode = strtol(argv[1], &cp, 0); if (cp[0] != '\0') { printf("Invalid mode\n"); return (CMD_ERROR); } status = conout->QueryMode(conout, mode, &cols, &rows); if (EFI_ERROR(status)) { printf("invalid mode %d\n", mode); return (CMD_ERROR); } status = conout->SetMode(conout, mode); if (EFI_ERROR(status)) { printf("couldn't set mode %d\n", mode); return (CMD_ERROR); } sprintf(rowenv, "%u", (unsigned)rows); setenv("LINES", rowenv, 1); HO(); /* set cursor */ return (CMD_OK); } printf("Current mode: %d\n", conout->Mode->Mode); for (i = 0; i <= conout->Mode->MaxMode; i++) { status = conout->QueryMode(conout, i, &cols, &rows); if (EFI_ERROR(status)) continue; printf("Mode %d: %u columns, %u rows\n", i, (unsigned)cols, (unsigned)rows); } if (i != 0) printf("Select a mode with the command \"mode \"\n"); return (CMD_OK); } #ifdef LOADER_FDT_SUPPORT extern int command_fdt_internal(int argc, char *argv[]); /* * Since proper fdt command handling function is defined in fdt_loader_cmd.c, * and declaring it as extern is in contradiction with COMMAND_SET() macro * (which uses static pointer), we're defining wrapper function, which * calls the proper fdt handling routine. */ static int command_fdt(int argc, char *argv[]) { return (command_fdt_internal(argc, argv)); } COMMAND_SET(fdt, "fdt", "flattened device tree handling", command_fdt); #endif /* * Chain load another efi loader. */ static int command_chain(int argc, char *argv[]) { EFI_GUID LoadedImageGUID = LOADED_IMAGE_PROTOCOL; EFI_HANDLE loaderhandle; EFI_LOADED_IMAGE *loaded_image; EFI_STATUS status; struct stat st; struct devdesc *dev; char *name, *path; void *buf; int fd; if (argc < 2) { command_errmsg = "wrong number of arguments"; return (CMD_ERROR); } name = argv[1]; if ((fd = open(name, O_RDONLY)) < 0) { command_errmsg = "no such file"; return (CMD_ERROR); } if (fstat(fd, &st) < -1) { command_errmsg = "stat failed"; close(fd); return (CMD_ERROR); } status = BS->AllocatePool(EfiLoaderCode, (UINTN)st.st_size, &buf); if (status != EFI_SUCCESS) { command_errmsg = "failed to allocate buffer"; close(fd); return (CMD_ERROR); } if (read(fd, buf, st.st_size) != st.st_size) { command_errmsg = "error while reading the file"; (void)BS->FreePool(buf); close(fd); return (CMD_ERROR); } close(fd); status = BS->LoadImage(FALSE, IH, NULL, buf, st.st_size, &loaderhandle); (void)BS->FreePool(buf); if (status != EFI_SUCCESS) { command_errmsg = "LoadImage failed"; return (CMD_ERROR); } status = BS->HandleProtocol(loaderhandle, &LoadedImageGUID, (void **)&loaded_image); if (argc > 2) { int i, len = 0; CHAR16 *argp; for (i = 2; i < argc; i++) len += strlen(argv[i]) + 1; len *= sizeof (*argp); loaded_image->LoadOptions = argp = malloc (len); loaded_image->LoadOptionsSize = len; for (i = 2; i < argc; i++) { char *ptr = argv[i]; while (*ptr) *(argp++) = *(ptr++); *(argp++) = ' '; } *(--argv) = 0; } if (efi_getdev((void **)&dev, name, (const char **)&path) == 0) { #ifdef EFI_ZFS_BOOT struct zfs_devdesc *z_dev; #endif struct disk_devdesc *d_dev; pdinfo_t *hd, *pd; switch (dev->d_dev->dv_type) { #ifdef EFI_ZFS_BOOT case DEVT_ZFS: z_dev = (struct zfs_devdesc *)dev; loaded_image->DeviceHandle = efizfs_get_handle_by_guid(z_dev->pool_guid); break; #endif case DEVT_NET: loaded_image->DeviceHandle = efi_find_handle(dev->d_dev, dev->d_unit); break; default: hd = efiblk_get_pdinfo(dev); if (STAILQ_EMPTY(&hd->pd_part)) { loaded_image->DeviceHandle = hd->pd_handle; break; } d_dev = (struct disk_devdesc *)dev; STAILQ_FOREACH(pd, &hd->pd_part, pd_link) { /* * d_partition should be 255 */ if (pd->pd_unit == (uint32_t)d_dev->d_slice) { loaded_image->DeviceHandle = pd->pd_handle; break; } } break; } } dev_cleanup(); status = BS->StartImage(loaderhandle, NULL, NULL); if (status != EFI_SUCCESS) { command_errmsg = "StartImage failed"; free(loaded_image->LoadOptions); loaded_image->LoadOptions = NULL; status = BS->UnloadImage(loaded_image); return (CMD_ERROR); } return (CMD_ERROR); /* not reached */ } COMMAND_SET(chain, "chain", "chain load file", command_chain);