Index: head/sys/dev/mrsas/mrsas_cam.c =================================================================== --- head/sys/dev/mrsas/mrsas_cam.c (revision 334075) +++ head/sys/dev/mrsas/mrsas_cam.c (revision 334076) @@ -1,1686 +1,1685 @@ /* * Copyright (c) 2015, AVAGO Tech. All rights reserved. Author: Marian Choy * Copyright (c) 2014, LSI Corp. All rights reserved. Author: Marian Choy * Support: freebsdraid@avagotech.com * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. 2. Redistributions * in binary form must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. 3. Neither the name of the * nor the names of its contributors may be used to endorse or * promote products derived from this software without specific prior written * permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * */ #include __FBSDID("$FreeBSD$"); #include "dev/mrsas/mrsas.h" #include #include #include #include #include #include #include #include #include #include #include #include /* XXX for pcpu.h */ #include /* XXX for PCPU_GET */ #define smp_processor_id() PCPU_GET(cpuid) /* * Function prototypes */ int mrsas_cam_attach(struct mrsas_softc *sc); int mrsas_find_io_type(struct cam_sim *sim, union ccb *ccb); int mrsas_bus_scan(struct mrsas_softc *sc); int mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim); int mrsas_map_request(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb); int mrsas_build_ldio_rw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb); int mrsas_build_ldio_nonrw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb); int mrsas_build_syspdio(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb, struct cam_sim *sim, u_int8_t fp_possible); int mrsas_setup_io(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb, u_int32_t device_id, MRSAS_RAID_SCSI_IO_REQUEST * io_request); void mrsas_xpt_freeze(struct mrsas_softc *sc); void mrsas_xpt_release(struct mrsas_softc *sc); void mrsas_cam_detach(struct mrsas_softc *sc); void mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd); void mrsas_unmap_request(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd); void mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd); void mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo, u_int32_t req_desc_hi); void mrsas_set_pd_lba(MRSAS_RAID_SCSI_IO_REQUEST * io_request, u_int8_t cdb_len, struct IO_REQUEST_INFO *io_info, union ccb *ccb, MR_DRV_RAID_MAP_ALL * local_map_ptr, u_int32_t ref_tag, u_int32_t ld_block_size); static void mrsas_freeze_simq(struct mrsas_mpt_cmd *cmd, struct cam_sim *sim); static void mrsas_cam_poll(struct cam_sim *sim); static void mrsas_action(struct cam_sim *sim, union ccb *ccb); static void mrsas_scsiio_timeout(void *data); static int mrsas_track_scsiio(struct mrsas_softc *sc, target_id_t id, u_int32_t bus_id); static void mrsas_tm_response_code(struct mrsas_softc *sc, MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply); static int mrsas_issue_tm(struct mrsas_softc *sc, MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc); static void mrsas_data_load_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error); static int32_t mrsas_startio(struct mrsas_softc *sc, struct cam_sim *sim, union ccb *ccb); struct mrsas_mpt_cmd *mrsas_get_mpt_cmd(struct mrsas_softc *sc); MRSAS_REQUEST_DESCRIPTOR_UNION * mrsas_get_request_desc(struct mrsas_softc *sc, u_int16_t index); extern void mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd, u_int8_t status, u_int8_t extStatus); extern int mrsas_reset_targets(struct mrsas_softc *sc); extern u_int16_t MR_TargetIdToLdGet(u_int32_t ldTgtId, MR_DRV_RAID_MAP_ALL * map); extern u_int32_t -MR_LdBlockSizeGet(u_int32_t ldTgtId, MR_DRV_RAID_MAP_ALL * map, - struct mrsas_softc *sc); +MR_LdBlockSizeGet(u_int32_t ldTgtId, MR_DRV_RAID_MAP_ALL * map); extern void mrsas_isr(void *arg); extern void mrsas_aen_handler(struct mrsas_softc *sc); extern u_int8_t MR_BuildRaidContext(struct mrsas_softc *sc, struct IO_REQUEST_INFO *io_info, RAID_CONTEXT * pRAID_Context, MR_DRV_RAID_MAP_ALL * map); extern u_int16_t MR_LdSpanArrayGet(u_int32_t ld, u_int32_t span, MR_DRV_RAID_MAP_ALL * map); extern u_int16_t mrsas_get_updated_dev_handle(struct mrsas_softc *sc, PLD_LOAD_BALANCE_INFO lbInfo, struct IO_REQUEST_INFO *io_info); extern u_int8_t megasas_get_best_arm(PLD_LOAD_BALANCE_INFO lbInfo, u_int8_t arm, u_int64_t block, u_int32_t count); extern int mrsas_complete_cmd(struct mrsas_softc *sc, u_int32_t MSIxIndex); extern MR_LD_RAID *MR_LdRaidGet(u_int32_t ld, MR_DRV_RAID_MAP_ALL * map); extern void mrsas_disable_intr(struct mrsas_softc *sc); extern void mrsas_enable_intr(struct mrsas_softc *sc); /* * mrsas_cam_attach: Main entry to CAM subsystem * input: Adapter instance soft state * * This function is called from mrsas_attach() during initialization to perform * SIM allocations and XPT bus registration. If the kernel version is 7.4 or * earlier, it would also initiate a bus scan. */ int mrsas_cam_attach(struct mrsas_softc *sc) { struct cam_devq *devq; int mrsas_cam_depth; mrsas_cam_depth = sc->max_fw_cmds - MRSAS_INTERNAL_CMDS; if ((devq = cam_simq_alloc(mrsas_cam_depth)) == NULL) { device_printf(sc->mrsas_dev, "Cannot allocate SIM queue\n"); return (ENOMEM); } /* * Create SIM for bus 0 and register, also create path */ sc->sim_0 = cam_sim_alloc(mrsas_action, mrsas_cam_poll, "mrsas", sc, device_get_unit(sc->mrsas_dev), &sc->sim_lock, mrsas_cam_depth, mrsas_cam_depth, devq); if (sc->sim_0 == NULL) { cam_simq_free(devq); device_printf(sc->mrsas_dev, "Cannot register SIM\n"); return (ENXIO); } /* Initialize taskqueue for Event Handling */ TASK_INIT(&sc->ev_task, 0, (void *)mrsas_aen_handler, sc); sc->ev_tq = taskqueue_create("mrsas_taskq", M_NOWAIT | M_ZERO, taskqueue_thread_enqueue, &sc->ev_tq); /* Run the task queue with lowest priority */ taskqueue_start_threads(&sc->ev_tq, 1, 255, "%s taskq", device_get_nameunit(sc->mrsas_dev)); mtx_lock(&sc->sim_lock); if (xpt_bus_register(sc->sim_0, sc->mrsas_dev, 0) != CAM_SUCCESS) { cam_sim_free(sc->sim_0, TRUE); /* passing true frees the devq */ mtx_unlock(&sc->sim_lock); return (ENXIO); } if (xpt_create_path(&sc->path_0, NULL, cam_sim_path(sc->sim_0), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { xpt_bus_deregister(cam_sim_path(sc->sim_0)); cam_sim_free(sc->sim_0, TRUE); /* passing true will free the * devq */ mtx_unlock(&sc->sim_lock); return (ENXIO); } mtx_unlock(&sc->sim_lock); /* * Create SIM for bus 1 and register, also create path */ sc->sim_1 = cam_sim_alloc(mrsas_action, mrsas_cam_poll, "mrsas", sc, device_get_unit(sc->mrsas_dev), &sc->sim_lock, mrsas_cam_depth, mrsas_cam_depth, devq); if (sc->sim_1 == NULL) { cam_simq_free(devq); device_printf(sc->mrsas_dev, "Cannot register SIM\n"); return (ENXIO); } mtx_lock(&sc->sim_lock); if (xpt_bus_register(sc->sim_1, sc->mrsas_dev, 1) != CAM_SUCCESS) { cam_sim_free(sc->sim_1, TRUE); /* passing true frees the devq */ mtx_unlock(&sc->sim_lock); return (ENXIO); } if (xpt_create_path(&sc->path_1, NULL, cam_sim_path(sc->sim_1), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { xpt_bus_deregister(cam_sim_path(sc->sim_1)); cam_sim_free(sc->sim_1, TRUE); mtx_unlock(&sc->sim_lock); return (ENXIO); } mtx_unlock(&sc->sim_lock); #if (__FreeBSD_version <= 704000) if (mrsas_bus_scan(sc)) { device_printf(sc->mrsas_dev, "Error in bus scan.\n"); return (1); } #endif return (0); } /* * mrsas_cam_detach: De-allocates and teardown CAM * input: Adapter instance soft state * * De-registers and frees the paths and SIMs. */ void mrsas_cam_detach(struct mrsas_softc *sc) { if (sc->ev_tq != NULL) taskqueue_free(sc->ev_tq); mtx_lock(&sc->sim_lock); if (sc->path_0) xpt_free_path(sc->path_0); if (sc->sim_0) { xpt_bus_deregister(cam_sim_path(sc->sim_0)); cam_sim_free(sc->sim_0, FALSE); } if (sc->path_1) xpt_free_path(sc->path_1); if (sc->sim_1) { xpt_bus_deregister(cam_sim_path(sc->sim_1)); cam_sim_free(sc->sim_1, TRUE); } mtx_unlock(&sc->sim_lock); } /* * mrsas_action: SIM callback entry point * input: pointer to SIM pointer to CAM Control Block * * This function processes CAM subsystem requests. The type of request is stored * in ccb->ccb_h.func_code. The preprocessor #ifdef is necessary because * ccb->cpi.maxio is not supported for FreeBSD version 7.4 or earlier. */ static void mrsas_action(struct cam_sim *sim, union ccb *ccb) { struct mrsas_softc *sc = (struct mrsas_softc *)cam_sim_softc(sim); struct ccb_hdr *ccb_h = &(ccb->ccb_h); u_int32_t device_id; /* * Check if the system going down * or the adapter is in unrecoverable critical error */ if (sc->remove_in_progress || (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR)) { ccb->ccb_h.status |= CAM_DEV_NOT_THERE; xpt_done(ccb); return; } switch (ccb->ccb_h.func_code) { case XPT_SCSI_IO: { device_id = ccb_h->target_id; /* * bus 0 is LD, bus 1 is for system-PD */ if (cam_sim_bus(sim) == 1 && sc->pd_list[device_id].driveState != MR_PD_STATE_SYSTEM) { ccb->ccb_h.status |= CAM_DEV_NOT_THERE; xpt_done(ccb); } else { if (mrsas_startio(sc, sim, ccb)) { ccb->ccb_h.status |= CAM_REQ_INVALID; xpt_done(ccb); } } break; } case XPT_ABORT: { ccb->ccb_h.status = CAM_UA_ABORT; xpt_done(ccb); break; } case XPT_RESET_BUS: { xpt_done(ccb); break; } case XPT_GET_TRAN_SETTINGS: { ccb->cts.protocol = PROTO_SCSI; ccb->cts.protocol_version = SCSI_REV_2; ccb->cts.transport = XPORT_SPI; ccb->cts.transport_version = 2; ccb->cts.xport_specific.spi.valid = CTS_SPI_VALID_DISC; ccb->cts.xport_specific.spi.flags = CTS_SPI_FLAGS_DISC_ENB; ccb->cts.proto_specific.scsi.valid = CTS_SCSI_VALID_TQ; ccb->cts.proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB; ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; } case XPT_SET_TRAN_SETTINGS: { ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; xpt_done(ccb); break; } case XPT_CALC_GEOMETRY: { cam_calc_geometry(&ccb->ccg, 1); xpt_done(ccb); break; } case XPT_PATH_INQ: { ccb->cpi.version_num = 1; ccb->cpi.hba_inquiry = 0; ccb->cpi.target_sprt = 0; #if (__FreeBSD_version >= 902001) ccb->cpi.hba_misc = PIM_UNMAPPED; #else ccb->cpi.hba_misc = 0; #endif ccb->cpi.hba_eng_cnt = 0; ccb->cpi.max_lun = MRSAS_SCSI_MAX_LUNS; ccb->cpi.unit_number = cam_sim_unit(sim); ccb->cpi.bus_id = cam_sim_bus(sim); ccb->cpi.initiator_id = MRSAS_SCSI_INITIATOR_ID; ccb->cpi.base_transfer_speed = 150000; strlcpy(ccb->cpi.sim_vid, "FreeBSD", SIM_IDLEN); strlcpy(ccb->cpi.hba_vid, "AVAGO", HBA_IDLEN); strlcpy(ccb->cpi.dev_name, cam_sim_name(sim), DEV_IDLEN); ccb->cpi.transport = XPORT_SPI; ccb->cpi.transport_version = 2; ccb->cpi.protocol = PROTO_SCSI; ccb->cpi.protocol_version = SCSI_REV_2; if (ccb->cpi.bus_id == 0) ccb->cpi.max_target = MRSAS_MAX_PD - 1; else ccb->cpi.max_target = MRSAS_MAX_LD_IDS - 1; #if (__FreeBSD_version > 704000) ccb->cpi.maxio = sc->max_num_sge * MRSAS_PAGE_SIZE; #endif ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; } default: { ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); break; } } } /* * mrsas_scsiio_timeout: Callback function for IO timed out * input: mpt command context * * This function will execute after timeout value provided by ccb header from * CAM layer, if timer expires. Driver will run timer for all DCDM and LDIO * coming from CAM layer. This function is callback function for IO timeout * and it runs in no-sleep context. Set do_timedout_reset in Adapter context * so that it will execute OCR/Kill adpter from ocr_thread context. */ static void mrsas_scsiio_timeout(void *data) { struct mrsas_mpt_cmd *cmd; struct mrsas_softc *sc; u_int32_t target_id; if (!data) return; cmd = (struct mrsas_mpt_cmd *)data; sc = cmd->sc; if (cmd->ccb_ptr == NULL) { printf("command timeout with NULL ccb\n"); return; } /* * Below callout is dummy entry so that it will be cancelled from * mrsas_cmd_done(). Now Controller will go to OCR/Kill Adapter based * on OCR enable/disable property of Controller from ocr_thread * context. */ #if (__FreeBSD_version >= 1000510) callout_reset_sbt(&cmd->cm_callout, SBT_1S * 180, 0, mrsas_scsiio_timeout, cmd, 0); #else callout_reset(&cmd->cm_callout, (180000 * hz) / 1000, mrsas_scsiio_timeout, cmd); #endif if (cmd->ccb_ptr->cpi.bus_id == 0) target_id = cmd->ccb_ptr->ccb_h.target_id; else target_id = (cmd->ccb_ptr->ccb_h.target_id + (MRSAS_MAX_PD - 1)); /* Save the cmd to be processed for TM, if it is not there in the array */ if (sc->target_reset_pool[target_id] == NULL) { sc->target_reset_pool[target_id] = cmd; mrsas_atomic_inc(&sc->target_reset_outstanding); } return; } /* * mrsas_startio: SCSI IO entry point * input: Adapter instance soft state * pointer to CAM Control Block * * This function is the SCSI IO entry point and it initiates IO processing. It * copies the IO and depending if the IO is read/write or inquiry, it would * call mrsas_build_ldio() or mrsas_build_dcdb(), respectively. It returns 0 * if the command is sent to firmware successfully, otherwise it returns 1. */ static int32_t mrsas_startio(struct mrsas_softc *sc, struct cam_sim *sim, union ccb *ccb) { struct mrsas_mpt_cmd *cmd; struct ccb_hdr *ccb_h = &(ccb->ccb_h); struct ccb_scsiio *csio = &(ccb->csio); MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; u_int8_t cmd_type; if ((csio->cdb_io.cdb_bytes[0]) == SYNCHRONIZE_CACHE && (!sc->fw_sync_cache_support)) { ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); return (0); } ccb_h->status |= CAM_SIM_QUEUED; cmd = mrsas_get_mpt_cmd(sc); if (!cmd) { ccb_h->status |= CAM_REQUEUE_REQ; xpt_done(ccb); return (0); } if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { if (ccb_h->flags & CAM_DIR_IN) cmd->flags |= MRSAS_DIR_IN; if (ccb_h->flags & CAM_DIR_OUT) cmd->flags |= MRSAS_DIR_OUT; } else cmd->flags = MRSAS_DIR_NONE; /* no data */ /* For FreeBSD 9.2 and higher */ #if (__FreeBSD_version >= 902001) /* * XXX We don't yet support physical addresses here. */ switch ((ccb->ccb_h.flags & CAM_DATA_MASK)) { case CAM_DATA_PADDR: case CAM_DATA_SG_PADDR: device_printf(sc->mrsas_dev, "%s: physical addresses not supported\n", __func__); mrsas_release_mpt_cmd(cmd); ccb_h->status = CAM_REQ_INVALID; ccb_h->status &= ~CAM_SIM_QUEUED; goto done; case CAM_DATA_SG: device_printf(sc->mrsas_dev, "%s: scatter gather is not supported\n", __func__); mrsas_release_mpt_cmd(cmd); ccb_h->status = CAM_REQ_INVALID; goto done; case CAM_DATA_VADDR: if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) { mrsas_release_mpt_cmd(cmd); ccb_h->status = CAM_REQ_TOO_BIG; goto done; } cmd->length = csio->dxfer_len; if (cmd->length) cmd->data = csio->data_ptr; break; case CAM_DATA_BIO: if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) { mrsas_release_mpt_cmd(cmd); ccb_h->status = CAM_REQ_TOO_BIG; goto done; } cmd->length = csio->dxfer_len; if (cmd->length) cmd->data = csio->data_ptr; break; default: ccb->ccb_h.status = CAM_REQ_INVALID; goto done; } #else if (!(ccb_h->flags & CAM_DATA_PHYS)) { /* Virtual data address */ if (!(ccb_h->flags & CAM_SCATTER_VALID)) { if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) { mrsas_release_mpt_cmd(cmd); ccb_h->status = CAM_REQ_TOO_BIG; goto done; } cmd->length = csio->dxfer_len; if (cmd->length) cmd->data = csio->data_ptr; } else { mrsas_release_mpt_cmd(cmd); ccb_h->status = CAM_REQ_INVALID; goto done; } } else { /* Data addresses are physical. */ mrsas_release_mpt_cmd(cmd); ccb_h->status = CAM_REQ_INVALID; ccb_h->status &= ~CAM_SIM_QUEUED; goto done; } #endif /* save ccb ptr */ cmd->ccb_ptr = ccb; req_desc = mrsas_get_request_desc(sc, (cmd->index) - 1); if (!req_desc) { device_printf(sc->mrsas_dev, "Cannot get request_descriptor.\n"); return (FAIL); } memset(req_desc, 0, sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION)); cmd->request_desc = req_desc; if (ccb_h->flags & CAM_CDB_POINTER) bcopy(csio->cdb_io.cdb_ptr, cmd->io_request->CDB.CDB32, csio->cdb_len); else bcopy(csio->cdb_io.cdb_bytes, cmd->io_request->CDB.CDB32, csio->cdb_len); mtx_lock(&sc->raidmap_lock); /* Check for IO type READ-WRITE targeted for Logical Volume */ cmd_type = mrsas_find_io_type(sim, ccb); switch (cmd_type) { case READ_WRITE_LDIO: /* Build READ-WRITE IO for Logical Volume */ if (mrsas_build_ldio_rw(sc, cmd, ccb)) { device_printf(sc->mrsas_dev, "Build RW LDIO failed.\n"); mtx_unlock(&sc->raidmap_lock); return (1); } break; case NON_READ_WRITE_LDIO: /* Build NON READ-WRITE IO for Logical Volume */ if (mrsas_build_ldio_nonrw(sc, cmd, ccb)) { device_printf(sc->mrsas_dev, "Build NON-RW LDIO failed.\n"); mtx_unlock(&sc->raidmap_lock); return (1); } break; case READ_WRITE_SYSPDIO: case NON_READ_WRITE_SYSPDIO: if (sc->secure_jbod_support && (cmd_type == NON_READ_WRITE_SYSPDIO)) { /* Build NON-RW IO for JBOD */ if (mrsas_build_syspdio(sc, cmd, ccb, sim, 0)) { device_printf(sc->mrsas_dev, "Build SYSPDIO failed.\n"); mtx_unlock(&sc->raidmap_lock); return (1); } } else { /* Build RW IO for JBOD */ if (mrsas_build_syspdio(sc, cmd, ccb, sim, 1)) { device_printf(sc->mrsas_dev, "Build SYSPDIO failed.\n"); mtx_unlock(&sc->raidmap_lock); return (1); } } } mtx_unlock(&sc->raidmap_lock); if (cmd->flags == MRSAS_DIR_IN) /* from device */ cmd->io_request->Control |= MPI2_SCSIIO_CONTROL_READ; else if (cmd->flags == MRSAS_DIR_OUT) /* to device */ cmd->io_request->Control |= MPI2_SCSIIO_CONTROL_WRITE; cmd->io_request->SGLFlags = MPI2_SGE_FLAGS_64_BIT_ADDRESSING; cmd->io_request->SGLOffset0 = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL) / 4; cmd->io_request->SenseBufferLowAddress = cmd->sense_phys_addr; cmd->io_request->SenseBufferLength = MRSAS_SCSI_SENSE_BUFFERSIZE; req_desc = cmd->request_desc; req_desc->SCSIIO.SMID = cmd->index; /* * Start timer for IO timeout. Default timeout value is 90 second. */ #if (__FreeBSD_version >= 1000510) callout_reset_sbt(&cmd->cm_callout, SBT_1S * 180, 0, mrsas_scsiio_timeout, cmd, 0); #else callout_reset(&cmd->cm_callout, (180000 * hz) / 1000, mrsas_scsiio_timeout, cmd); #endif mrsas_atomic_inc(&sc->fw_outstanding); if (mrsas_atomic_read(&sc->fw_outstanding) > sc->io_cmds_highwater) sc->io_cmds_highwater++; mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high); return (0); done: xpt_done(ccb); return (0); } /* * mrsas_find_io_type: Determines if IO is read/write or inquiry * input: pointer to CAM Control Block * * This function determines if the IO is read/write or inquiry. It returns a 1 * if the IO is read/write and 0 if it is inquiry. */ int mrsas_find_io_type(struct cam_sim *sim, union ccb *ccb) { struct ccb_scsiio *csio = &(ccb->csio); switch (csio->cdb_io.cdb_bytes[0]) { case READ_10: case WRITE_10: case READ_12: case WRITE_12: case READ_6: case WRITE_6: case READ_16: case WRITE_16: return (cam_sim_bus(sim) ? READ_WRITE_SYSPDIO : READ_WRITE_LDIO); default: return (cam_sim_bus(sim) ? NON_READ_WRITE_SYSPDIO : NON_READ_WRITE_LDIO); } } /* * mrsas_get_mpt_cmd: Get a cmd from free command pool * input: Adapter instance soft state * * This function removes an MPT command from the command free list and * initializes it. */ struct mrsas_mpt_cmd * mrsas_get_mpt_cmd(struct mrsas_softc *sc) { struct mrsas_mpt_cmd *cmd = NULL; mtx_lock(&sc->mpt_cmd_pool_lock); if (!TAILQ_EMPTY(&sc->mrsas_mpt_cmd_list_head)) { cmd = TAILQ_FIRST(&sc->mrsas_mpt_cmd_list_head); TAILQ_REMOVE(&sc->mrsas_mpt_cmd_list_head, cmd, next); } else { goto out; } memset((uint8_t *)cmd->io_request, 0, MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE); cmd->data = NULL; cmd->length = 0; cmd->flags = 0; cmd->error_code = 0; cmd->load_balance = 0; cmd->ccb_ptr = NULL; out: mtx_unlock(&sc->mpt_cmd_pool_lock); return cmd; } /* * mrsas_release_mpt_cmd: Return a cmd to free command pool * input: Command packet for return to free command pool * * This function returns an MPT command to the free command list. */ void mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd) { struct mrsas_softc *sc = cmd->sc; mtx_lock(&sc->mpt_cmd_pool_lock); cmd->sync_cmd_idx = (u_int32_t)MRSAS_ULONG_MAX; TAILQ_INSERT_HEAD(&(sc->mrsas_mpt_cmd_list_head), cmd, next); mtx_unlock(&sc->mpt_cmd_pool_lock); return; } /* * mrsas_get_request_desc: Get request descriptor from array * input: Adapter instance soft state * SMID index * * This function returns a pointer to the request descriptor. */ MRSAS_REQUEST_DESCRIPTOR_UNION * mrsas_get_request_desc(struct mrsas_softc *sc, u_int16_t index) { u_int8_t *p; if (index >= sc->max_fw_cmds) { device_printf(sc->mrsas_dev, "Invalid SMID (0x%x)request for desc\n", index); return NULL; } p = sc->req_desc + sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION) * index; return (MRSAS_REQUEST_DESCRIPTOR_UNION *) p; } /* * mrsas_build_ldio_rw: Builds an LDIO command * input: Adapter instance soft state * Pointer to command packet * Pointer to CCB * * This function builds the LDIO command packet. It returns 0 if the command is * built successfully, otherwise it returns a 1. */ int mrsas_build_ldio_rw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb) { struct ccb_hdr *ccb_h = &(ccb->ccb_h); struct ccb_scsiio *csio = &(ccb->csio); u_int32_t device_id; MRSAS_RAID_SCSI_IO_REQUEST *io_request; device_id = ccb_h->target_id; io_request = cmd->io_request; io_request->RaidContext.VirtualDiskTgtId = device_id; io_request->RaidContext.status = 0; io_request->RaidContext.exStatus = 0; /* just the cdb len, other flags zero, and ORed-in later for FP */ io_request->IoFlags = csio->cdb_len; if (mrsas_setup_io(sc, cmd, ccb, device_id, io_request) != SUCCESS) device_printf(sc->mrsas_dev, "Build ldio or fpio error\n"); io_request->DataLength = cmd->length; if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) { if (cmd->sge_count > sc->max_num_sge) { device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds" "max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge); return (FAIL); } /* * numSGE store lower 8 bit of sge_count. numSGEExt store * higher 8 bit of sge_count */ io_request->RaidContext.numSGE = cmd->sge_count; io_request->RaidContext.numSGEExt = (uint8_t)(cmd->sge_count >> 8); } else { device_printf(sc->mrsas_dev, "Data map/load failed.\n"); return (FAIL); } return (0); } /* * mrsas_setup_io: Set up data including Fast Path I/O * input: Adapter instance soft state * Pointer to command packet * Pointer to CCB * * This function builds the DCDB inquiry command. It returns 0 if the command * is built successfully, otherwise it returns a 1. */ int mrsas_setup_io(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb, u_int32_t device_id, MRSAS_RAID_SCSI_IO_REQUEST * io_request) { struct ccb_hdr *ccb_h = &(ccb->ccb_h); struct ccb_scsiio *csio = &(ccb->csio); struct IO_REQUEST_INFO io_info; MR_DRV_RAID_MAP_ALL *map_ptr; MR_LD_RAID *raid; u_int8_t fp_possible; u_int32_t start_lba_hi, start_lba_lo, ld_block_size, ld; u_int32_t datalength = 0; start_lba_lo = 0; start_lba_hi = 0; fp_possible = 0; /* * READ_6 (0x08) or WRITE_6 (0x0A) cdb */ if (csio->cdb_len == 6) { datalength = (u_int32_t)csio->cdb_io.cdb_bytes[4]; start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[1] << 16) | ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 8) | (u_int32_t)csio->cdb_io.cdb_bytes[3]; start_lba_lo &= 0x1FFFFF; } /* * READ_10 (0x28) or WRITE_6 (0x2A) cdb */ else if (csio->cdb_len == 10) { datalength = (u_int32_t)csio->cdb_io.cdb_bytes[8] | ((u_int32_t)csio->cdb_io.cdb_bytes[7] << 8); start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) | ((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) | (u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 | ((u_int32_t)csio->cdb_io.cdb_bytes[5]); } /* * READ_12 (0xA8) or WRITE_12 (0xAA) cdb */ else if (csio->cdb_len == 12) { datalength = (u_int32_t)csio->cdb_io.cdb_bytes[6] << 24 | ((u_int32_t)csio->cdb_io.cdb_bytes[7] << 16) | ((u_int32_t)csio->cdb_io.cdb_bytes[8] << 8) | ((u_int32_t)csio->cdb_io.cdb_bytes[9]); start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) | ((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) | (u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 | ((u_int32_t)csio->cdb_io.cdb_bytes[5]); } /* * READ_16 (0x88) or WRITE_16 (0xx8A) cdb */ else if (csio->cdb_len == 16) { datalength = (u_int32_t)csio->cdb_io.cdb_bytes[10] << 24 | ((u_int32_t)csio->cdb_io.cdb_bytes[11] << 16) | ((u_int32_t)csio->cdb_io.cdb_bytes[12] << 8) | ((u_int32_t)csio->cdb_io.cdb_bytes[13]); start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[6] << 24) | ((u_int32_t)csio->cdb_io.cdb_bytes[7] << 16) | (u_int32_t)csio->cdb_io.cdb_bytes[8] << 8 | ((u_int32_t)csio->cdb_io.cdb_bytes[9]); start_lba_hi = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) | ((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) | (u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 | ((u_int32_t)csio->cdb_io.cdb_bytes[5]); } memset(&io_info, 0, sizeof(struct IO_REQUEST_INFO)); io_info.ldStartBlock = ((u_int64_t)start_lba_hi << 32) | start_lba_lo; io_info.numBlocks = datalength; io_info.ldTgtId = device_id; switch (ccb_h->flags & CAM_DIR_MASK) { case CAM_DIR_IN: io_info.isRead = 1; break; case CAM_DIR_OUT: io_info.isRead = 0; break; case CAM_DIR_NONE: default: mrsas_dprint(sc, MRSAS_TRACE, "From %s : DMA Flag is %d \n", __func__, ccb_h->flags & CAM_DIR_MASK); break; } map_ptr = sc->ld_drv_map[(sc->map_id & 1)]; - ld_block_size = MR_LdBlockSizeGet(device_id, map_ptr, sc); + ld_block_size = MR_LdBlockSizeGet(device_id, map_ptr); ld = MR_TargetIdToLdGet(device_id, map_ptr); if ((ld >= MAX_LOGICAL_DRIVES_EXT) || (!sc->fast_path_io)) { io_request->RaidContext.regLockFlags = 0; fp_possible = 0; } else { if (MR_BuildRaidContext(sc, &io_info, &io_request->RaidContext, map_ptr)) fp_possible = io_info.fpOkForIo; } raid = MR_LdRaidGet(ld, map_ptr); /* Store the TM capability value in cmd */ cmd->tmCapable = raid->capability.tmCapable; cmd->request_desc->SCSIIO.MSIxIndex = sc->msix_vectors ? smp_processor_id() % sc->msix_vectors : 0; if (fp_possible) { mrsas_set_pd_lba(io_request, csio->cdb_len, &io_info, ccb, map_ptr, start_lba_lo, ld_block_size); io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; cmd->request_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_FP_IO << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); if (sc->mrsas_gen3_ctrl) { if (io_request->RaidContext.regLockFlags == REGION_TYPE_UNUSED) cmd->request_desc->SCSIIO.RequestFlags = (MRSAS_REQ_DESCRIPT_FLAGS_NO_LOCK << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); io_request->RaidContext.Type = MPI2_TYPE_CUDA; io_request->RaidContext.nseg = 0x1; io_request->IoFlags |= MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH; io_request->RaidContext.regLockFlags |= (MR_RL_FLAGS_GRANT_DESTINATION_CUDA | MR_RL_FLAGS_SEQ_NUM_ENABLE); } if ((sc->load_balance_info[device_id].loadBalanceFlag) && (io_info.isRead)) { io_info.devHandle = mrsas_get_updated_dev_handle(sc, &sc->load_balance_info[device_id], &io_info); cmd->load_balance = MRSAS_LOAD_BALANCE_FLAG; cmd->pd_r1_lb = io_info.pd_after_lb; } else cmd->load_balance = 0; cmd->request_desc->SCSIIO.DevHandle = io_info.devHandle; io_request->DevHandle = io_info.devHandle; } else { /* Not FP IO */ io_request->RaidContext.timeoutValue = map_ptr->raidMap.fpPdIoTimeoutSec; cmd->request_desc->SCSIIO.RequestFlags = (MRSAS_REQ_DESCRIPT_FLAGS_LD_IO << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); if (sc->mrsas_gen3_ctrl) { if (io_request->RaidContext.regLockFlags == REGION_TYPE_UNUSED) cmd->request_desc->SCSIIO.RequestFlags = (MRSAS_REQ_DESCRIPT_FLAGS_NO_LOCK << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); io_request->RaidContext.Type = MPI2_TYPE_CUDA; io_request->RaidContext.regLockFlags |= (MR_RL_FLAGS_GRANT_DESTINATION_CPU0 | MR_RL_FLAGS_SEQ_NUM_ENABLE); io_request->RaidContext.nseg = 0x1; } io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST; io_request->DevHandle = device_id; } return (0); } /* * mrsas_build_ldio_nonrw: Builds an LDIO command * input: Adapter instance soft state * Pointer to command packet * Pointer to CCB * * This function builds the LDIO command packet. It returns 0 if the command is * built successfully, otherwise it returns a 1. */ int mrsas_build_ldio_nonrw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb) { struct ccb_hdr *ccb_h = &(ccb->ccb_h); u_int32_t device_id, ld; MR_DRV_RAID_MAP_ALL *map_ptr; MR_LD_RAID *raid; MRSAS_RAID_SCSI_IO_REQUEST *io_request; io_request = cmd->io_request; device_id = ccb_h->target_id; map_ptr = sc->ld_drv_map[(sc->map_id & 1)]; ld = MR_TargetIdToLdGet(device_id, map_ptr); raid = MR_LdRaidGet(ld, map_ptr); /* Store the TM capability value in cmd */ cmd->tmCapable = raid->capability.tmCapable; /* FW path for LD Non-RW (SCSI management commands) */ io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST; io_request->DevHandle = device_id; cmd->request_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); io_request->RaidContext.VirtualDiskTgtId = device_id; io_request->LUN[1] = ccb_h->target_lun & 0xF; io_request->DataLength = cmd->length; if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) { if (cmd->sge_count > sc->max_num_sge) { device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds" "max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge); return (1); } /* * numSGE store lower 8 bit of sge_count. numSGEExt store * higher 8 bit of sge_count */ io_request->RaidContext.numSGE = cmd->sge_count; io_request->RaidContext.numSGEExt = (uint8_t)(cmd->sge_count >> 8); } else { device_printf(sc->mrsas_dev, "Data map/load failed.\n"); return (1); } return (0); } /* * mrsas_build_syspdio: Builds an DCDB command * input: Adapter instance soft state * Pointer to command packet * Pointer to CCB * * This function builds the DCDB inquiry command. It returns 0 if the command * is built successfully, otherwise it returns a 1. */ int mrsas_build_syspdio(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb, struct cam_sim *sim, u_int8_t fp_possible) { struct ccb_hdr *ccb_h = &(ccb->ccb_h); u_int32_t device_id; MR_DRV_RAID_MAP_ALL *local_map_ptr; MRSAS_RAID_SCSI_IO_REQUEST *io_request; struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync; io_request = cmd->io_request; device_id = ccb_h->target_id; local_map_ptr = sc->ld_drv_map[(sc->map_id & 1)]; io_request->RaidContext.RAIDFlags = MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD << MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT; io_request->RaidContext.regLockFlags = 0; io_request->RaidContext.regLockRowLBA = 0; io_request->RaidContext.regLockLength = 0; /* If FW supports PD sequence number */ if (sc->use_seqnum_jbod_fp && sc->pd_list[device_id].driveType == 0x00) { //printf("Using Drv seq num\n"); pd_sync = (void *)sc->jbodmap_mem[(sc->pd_seq_map_id - 1) & 1]; cmd->tmCapable = pd_sync->seq[device_id].capability.tmCapable; io_request->RaidContext.VirtualDiskTgtId = device_id + 255; io_request->RaidContext.configSeqNum = pd_sync->seq[device_id].seqNum; io_request->DevHandle = pd_sync->seq[device_id].devHandle; io_request->RaidContext.regLockFlags |= (MR_RL_FLAGS_SEQ_NUM_ENABLE | MR_RL_FLAGS_GRANT_DESTINATION_CUDA); io_request->RaidContext.Type = MPI2_TYPE_CUDA; io_request->RaidContext.nseg = 0x1; } else if (sc->fast_path_io) { //printf("Using LD RAID map\n"); io_request->RaidContext.VirtualDiskTgtId = device_id; io_request->RaidContext.configSeqNum = 0; local_map_ptr = sc->ld_drv_map[(sc->map_id & 1)]; io_request->DevHandle = local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl; } else { //printf("Using FW PATH\n"); /* Want to send all IO via FW path */ io_request->RaidContext.VirtualDiskTgtId = device_id; io_request->RaidContext.configSeqNum = 0; io_request->DevHandle = 0xFFFF; } cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle; cmd->request_desc->SCSIIO.MSIxIndex = sc->msix_vectors ? smp_processor_id() % sc->msix_vectors : 0; if (!fp_possible) { /* system pd firmware path */ io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST; cmd->request_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); io_request->RaidContext.timeoutValue = local_map_ptr->raidMap.fpPdIoTimeoutSec; io_request->RaidContext.VirtualDiskTgtId = device_id; } else { /* system pd fast path */ io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; io_request->RaidContext.timeoutValue = local_map_ptr->raidMap.fpPdIoTimeoutSec; /* * NOTE - For system pd RW cmds only IoFlags will be FAST_PATH * Because the NON RW cmds will now go via FW Queue * and not the Exception queue */ io_request->IoFlags |= MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH; cmd->request_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_FP_IO << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); } io_request->LUN[1] = ccb_h->target_lun & 0xF; io_request->DataLength = cmd->length; if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) { if (cmd->sge_count > sc->max_num_sge) { device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds" "max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge); return (1); } /* * numSGE store lower 8 bit of sge_count. numSGEExt store * higher 8 bit of sge_count */ io_request->RaidContext.numSGE = cmd->sge_count; io_request->RaidContext.numSGEExt = (uint8_t)(cmd->sge_count >> 8); } else { device_printf(sc->mrsas_dev, "Data map/load failed.\n"); return (1); } return (0); } /* * mrsas_map_request: Map and load data * input: Adapter instance soft state * Pointer to command packet * * For data from OS, map and load the data buffer into bus space. The SG list * is built in the callback. If the bus dmamap load is not successful, * cmd->error_code will contain the error code and a 1 is returned. */ int mrsas_map_request(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, union ccb *ccb) { u_int32_t retcode = 0; struct cam_sim *sim; sim = xpt_path_sim(cmd->ccb_ptr->ccb_h.path); if (cmd->data != NULL) { /* Map data buffer into bus space */ mtx_lock(&sc->io_lock); #if (__FreeBSD_version >= 902001) retcode = bus_dmamap_load_ccb(sc->data_tag, cmd->data_dmamap, ccb, mrsas_data_load_cb, cmd, 0); #else retcode = bus_dmamap_load(sc->data_tag, cmd->data_dmamap, cmd->data, cmd->length, mrsas_data_load_cb, cmd, BUS_DMA_NOWAIT); #endif mtx_unlock(&sc->io_lock); if (retcode) device_printf(sc->mrsas_dev, "bus_dmamap_load(): retcode = %d\n", retcode); if (retcode == EINPROGRESS) { device_printf(sc->mrsas_dev, "request load in progress\n"); mrsas_freeze_simq(cmd, sim); } } if (cmd->error_code) return (1); return (retcode); } /* * mrsas_unmap_request: Unmap and unload data * input: Adapter instance soft state * Pointer to command packet * * This function unmaps and unloads data from OS. */ void mrsas_unmap_request(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd) { if (cmd->data != NULL) { if (cmd->flags & MRSAS_DIR_IN) bus_dmamap_sync(sc->data_tag, cmd->data_dmamap, BUS_DMASYNC_POSTREAD); if (cmd->flags & MRSAS_DIR_OUT) bus_dmamap_sync(sc->data_tag, cmd->data_dmamap, BUS_DMASYNC_POSTWRITE); mtx_lock(&sc->io_lock); bus_dmamap_unload(sc->data_tag, cmd->data_dmamap); mtx_unlock(&sc->io_lock); } } /* * mrsas_data_load_cb: Callback entry point * input: Pointer to command packet as argument * Pointer to segment * Number of segments Error * * This is the callback function of the bus dma map load. It builds the SG * list. */ static void mrsas_data_load_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) { struct mrsas_mpt_cmd *cmd = (struct mrsas_mpt_cmd *)arg; struct mrsas_softc *sc = cmd->sc; MRSAS_RAID_SCSI_IO_REQUEST *io_request; pMpi25IeeeSgeChain64_t sgl_ptr; int i = 0, sg_processed = 0; if (error) { cmd->error_code = error; device_printf(sc->mrsas_dev, "mrsas_data_load_cb: error=%d\n", error); if (error == EFBIG) { cmd->ccb_ptr->ccb_h.status = CAM_REQ_TOO_BIG; return; } } if (cmd->flags & MRSAS_DIR_IN) bus_dmamap_sync(cmd->sc->data_tag, cmd->data_dmamap, BUS_DMASYNC_PREREAD); if (cmd->flags & MRSAS_DIR_OUT) bus_dmamap_sync(cmd->sc->data_tag, cmd->data_dmamap, BUS_DMASYNC_PREWRITE); if (nseg > sc->max_num_sge) { device_printf(sc->mrsas_dev, "SGE count is too large or 0.\n"); return; } io_request = cmd->io_request; sgl_ptr = (pMpi25IeeeSgeChain64_t)&io_request->SGL; if (sc->mrsas_gen3_ctrl) { pMpi25IeeeSgeChain64_t sgl_ptr_end = sgl_ptr; sgl_ptr_end += sc->max_sge_in_main_msg - 1; sgl_ptr_end->Flags = 0; } if (nseg != 0) { for (i = 0; i < nseg; i++) { sgl_ptr->Address = segs[i].ds_addr; sgl_ptr->Length = segs[i].ds_len; sgl_ptr->Flags = 0; if (sc->mrsas_gen3_ctrl) { if (i == nseg - 1) sgl_ptr->Flags = IEEE_SGE_FLAGS_END_OF_LIST; } sgl_ptr++; sg_processed = i + 1; if ((sg_processed == (sc->max_sge_in_main_msg - 1)) && (nseg > sc->max_sge_in_main_msg)) { pMpi25IeeeSgeChain64_t sg_chain; if (sc->mrsas_gen3_ctrl) { if ((cmd->io_request->IoFlags & MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) != MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) cmd->io_request->ChainOffset = sc->chain_offset_io_request; else cmd->io_request->ChainOffset = 0; } else cmd->io_request->ChainOffset = sc->chain_offset_io_request; sg_chain = sgl_ptr; if (sc->mrsas_gen3_ctrl) sg_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT; else sg_chain->Flags = (IEEE_SGE_FLAGS_CHAIN_ELEMENT | MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR); sg_chain->Length = (sizeof(MPI2_SGE_IO_UNION) * (nseg - sg_processed)); sg_chain->Address = cmd->chain_frame_phys_addr; sgl_ptr = (pMpi25IeeeSgeChain64_t)cmd->chain_frame; } } } cmd->sge_count = nseg; } /* * mrsas_freeze_simq: Freeze SIM queue * input: Pointer to command packet * Pointer to SIM * * This function freezes the sim queue. */ static void mrsas_freeze_simq(struct mrsas_mpt_cmd *cmd, struct cam_sim *sim) { union ccb *ccb = (union ccb *)(cmd->ccb_ptr); xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; ccb->ccb_h.status |= CAM_REQUEUE_REQ; } void mrsas_xpt_freeze(struct mrsas_softc *sc) { xpt_freeze_simq(sc->sim_0, 1); xpt_freeze_simq(sc->sim_1, 1); } void mrsas_xpt_release(struct mrsas_softc *sc) { xpt_release_simq(sc->sim_0, 1); xpt_release_simq(sc->sim_1, 1); } /* * mrsas_cmd_done: Perform remaining command completion * input: Adapter instance soft state Pointer to command packet * * This function calls ummap request and releases the MPT command. */ void mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd) { mrsas_unmap_request(sc, cmd); mtx_lock(&sc->sim_lock); callout_stop(&cmd->cm_callout); xpt_done(cmd->ccb_ptr); cmd->ccb_ptr = NULL; mtx_unlock(&sc->sim_lock); mrsas_release_mpt_cmd(cmd); } /* * mrsas_cam_poll: Polling entry point * input: Pointer to SIM * * This is currently a stub function. */ static void mrsas_cam_poll(struct cam_sim *sim) { int i; struct mrsas_softc *sc = (struct mrsas_softc *)cam_sim_softc(sim); if (sc->msix_vectors != 0){ for (i=0; imsix_vectors; i++){ mrsas_complete_cmd(sc, i); } } else { mrsas_complete_cmd(sc, 0); } } /* * mrsas_bus_scan: Perform bus scan * input: Adapter instance soft state * * This mrsas_bus_scan function is needed for FreeBSD 7.x. Also, it should not * be called in FreeBSD 8.x and later versions, where the bus scan is * automatic. */ int mrsas_bus_scan(struct mrsas_softc *sc) { union ccb *ccb_0; union ccb *ccb_1; if ((ccb_0 = xpt_alloc_ccb()) == NULL) { return (ENOMEM); } if ((ccb_1 = xpt_alloc_ccb()) == NULL) { xpt_free_ccb(ccb_0); return (ENOMEM); } mtx_lock(&sc->sim_lock); if (xpt_create_path(&ccb_0->ccb_h.path, xpt_periph, cam_sim_path(sc->sim_0), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { xpt_free_ccb(ccb_0); xpt_free_ccb(ccb_1); mtx_unlock(&sc->sim_lock); return (EIO); } if (xpt_create_path(&ccb_1->ccb_h.path, xpt_periph, cam_sim_path(sc->sim_1), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { xpt_free_ccb(ccb_0); xpt_free_ccb(ccb_1); mtx_unlock(&sc->sim_lock); return (EIO); } mtx_unlock(&sc->sim_lock); xpt_rescan(ccb_0); xpt_rescan(ccb_1); return (0); } /* * mrsas_bus_scan_sim: Perform bus scan per SIM * input: adapter instance soft state * * This function will be called from Event handler on LD creation/deletion, * JBOD on/off. */ int mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim) { union ccb *ccb; if ((ccb = xpt_alloc_ccb()) == NULL) { return (ENOMEM); } mtx_lock(&sc->sim_lock); if (xpt_create_path(&ccb->ccb_h.path, xpt_periph, cam_sim_path(sim), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { xpt_free_ccb(ccb); mtx_unlock(&sc->sim_lock); return (EIO); } mtx_unlock(&sc->sim_lock); xpt_rescan(ccb); return (0); } /* * mrsas_track_scsiio: Track IOs for a given target in the mpt_cmd_list * input: Adapter instance soft state * Target ID of target * Bus ID of the target * * This function checks for any pending IO in the whole mpt_cmd_list pool * with the bus_id and target_id passed in arguments. If some IO is found * that means target reset is not successfully completed. * * Returns FAIL if IOs pending to the target device, else return SUCCESS */ static int mrsas_track_scsiio(struct mrsas_softc *sc, target_id_t tgt_id, u_int32_t bus_id) { int i; struct mrsas_mpt_cmd *mpt_cmd = NULL; for (i = 0 ; i < sc->max_fw_cmds; i++) { mpt_cmd = sc->mpt_cmd_list[i]; /* * Check if the target_id and bus_id is same as the timeout IO */ if (mpt_cmd->ccb_ptr) { /* bus_id = 1 denotes a VD */ if (bus_id == 1) tgt_id = (mpt_cmd->ccb_ptr->ccb_h.target_id - (MRSAS_MAX_PD - 1)); if (mpt_cmd->ccb_ptr->cpi.bus_id == bus_id && mpt_cmd->ccb_ptr->ccb_h.target_id == tgt_id) { device_printf(sc->mrsas_dev, "IO commands pending to target id %d\n", tgt_id); return FAIL; } } } return SUCCESS; } #if TM_DEBUG /* * mrsas_tm_response_code: Prints TM response code received from FW * input: Adapter instance soft state * MPI reply returned from firmware * * Returns nothing. */ static void mrsas_tm_response_code(struct mrsas_softc *sc, MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply) { char *desc; switch (mpi_reply->ResponseCode) { case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE: desc = "task management request completed"; break; case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME: desc = "invalid frame"; break; case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: desc = "task management request not supported"; break; case MPI2_SCSITASKMGMT_RSP_TM_FAILED: desc = "task management request failed"; break; case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED: desc = "task management request succeeded"; break; case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN: desc = "invalid lun"; break; case 0xA: desc = "overlapped tag attempted"; break; case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: desc = "task queued, however not sent to target"; break; default: desc = "unknown"; break; } device_printf(sc->mrsas_dev, "response_code(%01x): %s\n", mpi_reply->ResponseCode, desc); device_printf(sc->mrsas_dev, "TerminationCount/DevHandle/Function/TaskType/IOCStat/IOCLoginfo\n" "0x%x/0x%x/0x%x/0x%x/0x%x/0x%x\n", mpi_reply->TerminationCount, mpi_reply->DevHandle, mpi_reply->Function, mpi_reply->TaskType, mpi_reply->IOCStatus, mpi_reply->IOCLogInfo); } #endif /* * mrsas_issue_tm: Fires the TM command to FW and waits for completion * input: Adapter instance soft state * reqest descriptor compiled by mrsas_reset_targets * * Returns FAIL if TM command TIMEDOUT from FW else SUCCESS. */ static int mrsas_issue_tm(struct mrsas_softc *sc, MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc) { int sleep_stat; mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high); sleep_stat = msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, "tm_sleep", 50*hz); if (sleep_stat == EWOULDBLOCK) { device_printf(sc->mrsas_dev, "tm cmd TIMEDOUT\n"); return FAIL; } return SUCCESS; } /* * mrsas_reset_targets : Gathers info to fire a target reset command * input: Adapter instance soft state * * This function compiles data for a target reset command to be fired to the FW * and then traverse the target_reset_pool to see targets with TIMEDOUT IOs. * * Returns SUCCESS or FAIL */ int mrsas_reset_targets(struct mrsas_softc *sc) { struct mrsas_mpt_cmd *tm_mpt_cmd = NULL; struct mrsas_mpt_cmd *tgt_mpt_cmd = NULL; MR_TASK_MANAGE_REQUEST *mr_request; MPI2_SCSI_TASK_MANAGE_REQUEST *tm_mpi_request; MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; int retCode = FAIL, count, i, outstanding; u_int32_t MSIxIndex, bus_id; target_id_t tgt_id; #if TM_DEBUG MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply; #endif outstanding = mrsas_atomic_read(&sc->fw_outstanding); if (!outstanding) { device_printf(sc->mrsas_dev, "NO IOs pending...\n"); mrsas_atomic_set(&sc->target_reset_outstanding, 0); retCode = SUCCESS; goto return_status; } else if (sc->adprecovery != MRSAS_HBA_OPERATIONAL) { device_printf(sc->mrsas_dev, "Controller is not operational\n"); goto return_status; } else { /* Some more error checks will be added in future */ } /* Get an mpt frame and an index to fire the TM cmd */ tm_mpt_cmd = mrsas_get_mpt_cmd(sc); if (!tm_mpt_cmd) { retCode = FAIL; goto return_status; } req_desc = mrsas_get_request_desc(sc, (tm_mpt_cmd->index) - 1); if (!req_desc) { device_printf(sc->mrsas_dev, "Cannot get request_descriptor for tm.\n"); retCode = FAIL; goto release_mpt; } memset(req_desc, 0, sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION)); req_desc->HighPriority.SMID = tm_mpt_cmd->index; req_desc->HighPriority.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); req_desc->HighPriority.MSIxIndex = 0; req_desc->HighPriority.LMID = 0; req_desc->HighPriority.Reserved1 = 0; tm_mpt_cmd->request_desc = req_desc; mr_request = (MR_TASK_MANAGE_REQUEST *) tm_mpt_cmd->io_request; memset(mr_request, 0, sizeof(MR_TASK_MANAGE_REQUEST)); tm_mpi_request = (MPI2_SCSI_TASK_MANAGE_REQUEST *) &mr_request->TmRequest; tm_mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; tm_mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; tm_mpi_request->TaskMID = 0; /* smid task */ tm_mpi_request->LUN[1] = 0; /* Traverse the tm_mpt pool to get valid entries */ for (i = 0 ; i < MRSAS_MAX_TM_TARGETS; i++) { if(!sc->target_reset_pool[i]) { continue; } else { tgt_mpt_cmd = sc->target_reset_pool[i]; } tgt_id = i; /* See if the target is tm capable or NOT */ if (!tgt_mpt_cmd->tmCapable) { device_printf(sc->mrsas_dev, "Task management NOT SUPPORTED for " "CAM target:%d\n", tgt_id); retCode = FAIL; goto release_mpt; } tm_mpi_request->DevHandle = tgt_mpt_cmd->io_request->DevHandle; if (i < (MRSAS_MAX_PD - 1)) { mr_request->uTmReqReply.tmReqFlags.isTMForPD = 1; bus_id = 0; } else { mr_request->uTmReqReply.tmReqFlags.isTMForLD = 1; bus_id = 1; } device_printf(sc->mrsas_dev, "TM will be fired for " "CAM target:%d and bus_id %d\n", tgt_id, bus_id); sc->ocr_chan = (void *)&tm_mpt_cmd; retCode = mrsas_issue_tm(sc, req_desc); if (retCode == FAIL) goto release_mpt; #if TM_DEBUG mpi_reply = (MPI2_SCSI_TASK_MANAGE_REPLY *) &mr_request->uTmReqReply.TMReply; mrsas_tm_response_code(sc, mpi_reply); #endif mrsas_atomic_dec(&sc->target_reset_outstanding); sc->target_reset_pool[i] = NULL; /* Check for pending cmds in the mpt_cmd_pool with the tgt_id */ mrsas_disable_intr(sc); /* Wait for 1 second to complete parallel ISR calling same * mrsas_complete_cmd() */ msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, "mrsas_reset_wakeup", 1 * hz); count = sc->msix_vectors > 0 ? sc->msix_vectors : 1; mtx_unlock(&sc->sim_lock); for (MSIxIndex = 0; MSIxIndex < count; MSIxIndex++) mrsas_complete_cmd(sc, MSIxIndex); mtx_lock(&sc->sim_lock); retCode = mrsas_track_scsiio(sc, tgt_id, bus_id); mrsas_enable_intr(sc); if (retCode == FAIL) goto release_mpt; } device_printf(sc->mrsas_dev, "Number of targets outstanding " "after reset: %d\n", mrsas_atomic_read(&sc->target_reset_outstanding)); release_mpt: mrsas_release_mpt_cmd(tm_mpt_cmd); return_status: device_printf(sc->mrsas_dev, "target reset %s!!\n", (retCode == SUCCESS) ? "SUCCESS" : "FAIL"); return retCode; }