Index: stable/10/sys/amd64/amd64/exception.S =================================================================== --- stable/10/sys/amd64/amd64/exception.S (revision 333369) +++ stable/10/sys/amd64/amd64/exception.S (revision 333370) @@ -1,931 +1,1024 @@ /*- * Copyright (c) 1989, 1990 William F. Jolitz. * Copyright (c) 1990 The Regents of the University of California. * Copyright (c) 2007 The FreeBSD Foundation * All rights reserved. * * Portions of this software were developed by A. Joseph Koshy under * sponsorship from the FreeBSD Foundation and Google, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #include "opt_atpic.h" #include "opt_compat.h" #include "opt_hwpmc_hooks.h" #include "opt_kdtrace.h" #include #include #include #include #include "assym.s" #ifdef KDTRACE_HOOKS .bss .globl dtrace_invop_jump_addr .align 8 .type dtrace_invop_jump_addr,@object .size dtrace_invop_jump_addr,8 dtrace_invop_jump_addr: .zero 8 .globl dtrace_invop_calltrap_addr .align 8 .type dtrace_invop_calltrap_addr,@object .size dtrace_invop_calltrap_addr,8 dtrace_invop_calltrap_addr: .zero 8 #endif .text #ifdef HWPMC_HOOKS ENTRY(start_exceptions) #endif /*****************************************************************************/ /* Trap handling */ /*****************************************************************************/ /* * Trap and fault vector routines. * * All traps are 'interrupt gates', SDT_SYSIGT. An interrupt gate pushes * state on the stack but also disables interrupts. This is important for * us for the use of the swapgs instruction. We cannot be interrupted * until the GS.base value is correct. For most traps, we automatically * then enable interrupts if the interrupted context had them enabled. * This is equivalent to the i386 port's use of SDT_SYS386TGT. * * The cpu will push a certain amount of state onto the kernel stack for * the current process. See amd64/include/frame.h. * This includes the current RFLAGS (status register, which includes * the interrupt disable state prior to the trap), the code segment register, * and the return instruction pointer are pushed by the cpu. The cpu * will also push an 'error' code for certain traps. We push a dummy * error code for those traps where the cpu doesn't in order to maintain * a consistent frame. We also push a contrived 'trap number'. * * The CPU does not push the general registers, so we must do that, and we * must restore them prior to calling 'iret'. The CPU adjusts %cs and %ss * but does not mess with %ds, %es, %gs or %fs. We swap the %gs base for * for the kernel mode operation shortly, without changes to the selector * loaded. Since superuser long mode works with any selectors loaded into * segment registers other then %cs, which makes them mostly unused in long * mode, and kernel does not reference %fs, leave them alone. The segment * registers are reloaded on return to the usermode. */ MCOUNT_LABEL(user) MCOUNT_LABEL(btrap) /* Traps that we leave interrupts disabled for.. */ #define TRAP_NOEN(a) \ subq $TF_RIP,%rsp; \ movl $(a),TF_TRAPNO(%rsp) ; \ movq $0,TF_ADDR(%rsp) ; \ movq $0,TF_ERR(%rsp) ; \ jmp alltraps_noen -IDTVEC(dbg) - TRAP_NOEN(T_TRCTRAP) IDTVEC(bpt) TRAP_NOEN(T_BPTFLT) #ifdef KDTRACE_HOOKS IDTVEC(dtrace_ret) TRAP_NOEN(T_DTRACE_RET) #endif /* Regular traps; The cpu does not supply tf_err for these. */ #define TRAP(a) \ subq $TF_RIP,%rsp; \ movl $(a),TF_TRAPNO(%rsp) ; \ movq $0,TF_ADDR(%rsp) ; \ movq $0,TF_ERR(%rsp) ; \ jmp alltraps IDTVEC(div) TRAP(T_DIVIDE) IDTVEC(ofl) TRAP(T_OFLOW) IDTVEC(bnd) TRAP(T_BOUND) IDTVEC(ill) TRAP(T_PRIVINFLT) IDTVEC(dna) TRAP(T_DNA) IDTVEC(fpusegm) TRAP(T_FPOPFLT) IDTVEC(mchk) TRAP(T_MCHK) IDTVEC(rsvd) TRAP(T_RESERVED) IDTVEC(fpu) TRAP(T_ARITHTRAP) IDTVEC(xmm) TRAP(T_XMMFLT) /* This group of traps have tf_err already pushed by the cpu */ #define TRAP_ERR(a) \ subq $TF_ERR,%rsp; \ movl $(a),TF_TRAPNO(%rsp) ; \ movq $0,TF_ADDR(%rsp) ; \ jmp alltraps IDTVEC(tss) TRAP_ERR(T_TSSFLT) IDTVEC(missing) subq $TF_ERR,%rsp movl $T_SEGNPFLT,TF_TRAPNO(%rsp) jmp prot_addrf IDTVEC(stk) subq $TF_ERR,%rsp movl $T_STKFLT,TF_TRAPNO(%rsp) jmp prot_addrf IDTVEC(align) TRAP_ERR(T_ALIGNFLT) /* * alltraps entry point. Use swapgs if this is the first time in the * kernel from userland. Reenable interrupts if they were enabled * before the trap. This approximates SDT_SYS386TGT on the i386 port. */ SUPERALIGN_TEXT .globl alltraps .type alltraps,@function alltraps: movq %rdi,TF_RDI(%rsp) testb $SEL_RPL_MASK,TF_CS(%rsp) /* Did we come from kernel? */ jz alltraps_testi /* already running with kernel GS.base */ swapgs movq PCPU(CURPCB),%rdi andl $~PCB_FULL_IRET,PCB_FLAGS(%rdi) movw %fs,TF_FS(%rsp) movw %gs,TF_GS(%rsp) movw %es,TF_ES(%rsp) movw %ds,TF_DS(%rsp) alltraps_testi: testl $PSL_I,TF_RFLAGS(%rsp) jz alltraps_pushregs_no_rdi sti alltraps_pushregs_no_rdi: movq %rsi,TF_RSI(%rsp) movq %rdx,TF_RDX(%rsp) movq %rcx,TF_RCX(%rsp) movq %r8,TF_R8(%rsp) movq %r9,TF_R9(%rsp) movq %rax,TF_RAX(%rsp) movq %rbx,TF_RBX(%rsp) movq %rbp,TF_RBP(%rsp) movq %r10,TF_R10(%rsp) movq %r11,TF_R11(%rsp) movq %r12,TF_R12(%rsp) movq %r13,TF_R13(%rsp) movq %r14,TF_R14(%rsp) movq %r15,TF_R15(%rsp) movl $TF_HASSEGS,TF_FLAGS(%rsp) cld FAKE_MCOUNT(TF_RIP(%rsp)) #ifdef KDTRACE_HOOKS /* * DTrace Function Boundary Trace (fbt) probes are triggered * by int3 (0xcc) which causes the #BP (T_BPTFLT) breakpoint * interrupt. For all other trap types, just handle them in * the usual way. */ testb $SEL_RPL_MASK,TF_CS(%rsp) /* Did we come from kernel? */ jnz calltrap /* ignore userland traps */ cmpl $T_BPTFLT,TF_TRAPNO(%rsp) jne calltrap /* Check if there is no DTrace hook registered. */ cmpq $0,dtrace_invop_jump_addr je calltrap /* * Set our jump address for the jump back in the event that * the breakpoint wasn't caused by DTrace at all. */ movq $calltrap,dtrace_invop_calltrap_addr(%rip) /* Jump to the code hooked in by DTrace. */ movq dtrace_invop_jump_addr,%rax jmpq *dtrace_invop_jump_addr #endif .globl calltrap .type calltrap,@function calltrap: movq %rsp,%rdi call trap MEXITCOUNT jmp doreti /* Handle any pending ASTs */ /* * alltraps_noen entry point. Unlike alltraps above, we want to * leave the interrupts disabled. This corresponds to * SDT_SYS386IGT on the i386 port. */ SUPERALIGN_TEXT .globl alltraps_noen .type alltraps_noen,@function alltraps_noen: movq %rdi,TF_RDI(%rsp) testb $SEL_RPL_MASK,TF_CS(%rsp) /* Did we come from kernel? */ jz 1f /* already running with kernel GS.base */ swapgs movq PCPU(CURPCB),%rdi andl $~PCB_FULL_IRET,PCB_FLAGS(%rdi) 1: movw %fs,TF_FS(%rsp) movw %gs,TF_GS(%rsp) movw %es,TF_ES(%rsp) movw %ds,TF_DS(%rsp) jmp alltraps_pushregs_no_rdi IDTVEC(dblfault) subq $TF_ERR,%rsp movl $T_DOUBLEFLT,TF_TRAPNO(%rsp) movq $0,TF_ADDR(%rsp) movq $0,TF_ERR(%rsp) movq %rdi,TF_RDI(%rsp) movq %rsi,TF_RSI(%rsp) movq %rdx,TF_RDX(%rsp) movq %rcx,TF_RCX(%rsp) movq %r8,TF_R8(%rsp) movq %r9,TF_R9(%rsp) movq %rax,TF_RAX(%rsp) movq %rbx,TF_RBX(%rsp) movq %rbp,TF_RBP(%rsp) movq %r10,TF_R10(%rsp) movq %r11,TF_R11(%rsp) movq %r12,TF_R12(%rsp) movq %r13,TF_R13(%rsp) movq %r14,TF_R14(%rsp) movq %r15,TF_R15(%rsp) movw %fs,TF_FS(%rsp) movw %gs,TF_GS(%rsp) movw %es,TF_ES(%rsp) movw %ds,TF_DS(%rsp) movl $TF_HASSEGS,TF_FLAGS(%rsp) cld testb $SEL_RPL_MASK,TF_CS(%rsp) /* Did we come from kernel? */ jz 1f /* already running with kernel GS.base */ swapgs 1: movq %rsp,%rdi call dblfault_handler 2: hlt jmp 2b IDTVEC(page) subq $TF_ERR,%rsp movl $T_PAGEFLT,TF_TRAPNO(%rsp) movq %rdi,TF_RDI(%rsp) /* free up a GP register */ testb $SEL_RPL_MASK,TF_CS(%rsp) /* Did we come from kernel? */ jz 1f /* already running with kernel GS.base */ swapgs movq PCPU(CURPCB),%rdi andl $~PCB_FULL_IRET,PCB_FLAGS(%rdi) 1: movq %cr2,%rdi /* preserve %cr2 before .. */ movq %rdi,TF_ADDR(%rsp) /* enabling interrupts. */ movw %fs,TF_FS(%rsp) movw %gs,TF_GS(%rsp) movw %es,TF_ES(%rsp) movw %ds,TF_DS(%rsp) testl $PSL_I,TF_RFLAGS(%rsp) jz alltraps_pushregs_no_rdi sti jmp alltraps_pushregs_no_rdi /* * We have to special-case this one. If we get a trap in doreti() at * the iretq stage, we'll reenter with the wrong gs state. We'll have * to do a special the swapgs in this case even coming from the kernel. * XXX linux has a trap handler for their equivalent of load_gs(). */ IDTVEC(prot) subq $TF_ERR,%rsp movl $T_PROTFLT,TF_TRAPNO(%rsp) prot_addrf: movq $0,TF_ADDR(%rsp) movq %rdi,TF_RDI(%rsp) /* free up a GP register */ leaq doreti_iret(%rip),%rdi cmpq %rdi,TF_RIP(%rsp) je 1f /* kernel but with user gsbase!! */ testb $SEL_RPL_MASK,TF_CS(%rsp) /* Did we come from kernel? */ jz 2f /* already running with kernel GS.base */ 1: swapgs 2: movq PCPU(CURPCB),%rdi orl $PCB_FULL_IRET,PCB_FLAGS(%rdi) /* always full iret from GPF */ movw %fs,TF_FS(%rsp) movw %gs,TF_GS(%rsp) movw %es,TF_ES(%rsp) movw %ds,TF_DS(%rsp) testl $PSL_I,TF_RFLAGS(%rsp) jz alltraps_pushregs_no_rdi sti jmp alltraps_pushregs_no_rdi /* * Fast syscall entry point. We enter here with just our new %cs/%ss set, * and the new privilige level. We are still running on the old user stack * pointer. We have to juggle a few things around to find our stack etc. * swapgs gives us access to our PCPU space only. * * We do not support invoking this from a custom %cs or %ss (e.g. using * entries from an LDT). */ IDTVEC(fast_syscall) swapgs movq %rsp,PCPU(SCRATCH_RSP) movq PCPU(RSP0),%rsp /* Now emulate a trapframe. Make the 8 byte alignment odd for call. */ subq $TF_SIZE,%rsp /* defer TF_RSP till we have a spare register */ movq %r11,TF_RFLAGS(%rsp) movq %rcx,TF_RIP(%rsp) /* %rcx original value is in %r10 */ movq PCPU(SCRATCH_RSP),%r11 /* %r11 already saved */ movq %r11,TF_RSP(%rsp) /* user stack pointer */ movw %fs,TF_FS(%rsp) movw %gs,TF_GS(%rsp) movw %es,TF_ES(%rsp) movw %ds,TF_DS(%rsp) movq PCPU(CURPCB),%r11 andl $~PCB_FULL_IRET,PCB_FLAGS(%r11) sti movq $KUDSEL,TF_SS(%rsp) movq $KUCSEL,TF_CS(%rsp) movq $2,TF_ERR(%rsp) movq %rdi,TF_RDI(%rsp) /* arg 1 */ movq %rsi,TF_RSI(%rsp) /* arg 2 */ movq %rdx,TF_RDX(%rsp) /* arg 3 */ movq %r10,TF_RCX(%rsp) /* arg 4 */ movq %r8,TF_R8(%rsp) /* arg 5 */ movq %r9,TF_R9(%rsp) /* arg 6 */ movq %rax,TF_RAX(%rsp) /* syscall number */ movq %rbx,TF_RBX(%rsp) /* C preserved */ movq %rbp,TF_RBP(%rsp) /* C preserved */ movq %r12,TF_R12(%rsp) /* C preserved */ movq %r13,TF_R13(%rsp) /* C preserved */ movq %r14,TF_R14(%rsp) /* C preserved */ movq %r15,TF_R15(%rsp) /* C preserved */ movl $TF_HASSEGS,TF_FLAGS(%rsp) cld FAKE_MCOUNT(TF_RIP(%rsp)) movq PCPU(CURTHREAD),%rdi movq %rsp,TD_FRAME(%rdi) movl TF_RFLAGS(%rsp),%esi andl $PSL_T,%esi call amd64_syscall 1: movq PCPU(CURPCB),%rax /* Disable interrupts before testing PCB_FULL_IRET. */ cli testl $PCB_FULL_IRET,PCB_FLAGS(%rax) jnz 3f /* Check for and handle AST's on return to userland. */ movq PCPU(CURTHREAD),%rax testl $TDF_ASTPENDING | TDF_NEEDRESCHED,TD_FLAGS(%rax) jne 2f /* Restore preserved registers. */ MEXITCOUNT movq TF_RDI(%rsp),%rdi /* bonus; preserve arg 1 */ movq TF_RSI(%rsp),%rsi /* bonus: preserve arg 2 */ movq TF_RDX(%rsp),%rdx /* return value 2 */ movq TF_RAX(%rsp),%rax /* return value 1 */ movq TF_RFLAGS(%rsp),%r11 /* original %rflags */ movq TF_RIP(%rsp),%rcx /* original %rip */ movq TF_RSP(%rsp),%rsp /* user stack pointer */ swapgs sysretq 2: /* AST scheduled. */ sti movq %rsp,%rdi call ast jmp 1b 3: /* Requested full context restore, use doreti for that. */ MEXITCOUNT jmp doreti /* * Here for CYA insurance, in case a "syscall" instruction gets * issued from 32 bit compatability mode. MSR_CSTAR has to point * to *something* if EFER_SCE is enabled. */ IDTVEC(fast_syscall32) sysret + +/* + * DB# handler is very similar to NM#, because 'mov/pop %ss' delay + * generation of exception until the next instruction is executed, + * which might be a kernel entry. So we must execute the handler + * on IST stack and be ready for non-kernel GSBASE. + */ +IDTVEC(dbg) + subq $TF_RIP,%rsp + movl $(T_TRCTRAP),TF_TRAPNO(%rsp) + movq $0,TF_ADDR(%rsp) + movq $0,TF_ERR(%rsp) + movq %rdi,TF_RDI(%rsp) + movq %rsi,TF_RSI(%rsp) + movq %rdx,TF_RDX(%rsp) + movq %rcx,TF_RCX(%rsp) + movq %r8,TF_R8(%rsp) + movq %r9,TF_R9(%rsp) + movq %rax,TF_RAX(%rsp) + movq %rbx,TF_RBX(%rsp) + movq %rbp,TF_RBP(%rsp) + movq %r10,TF_R10(%rsp) + movq %r11,TF_R11(%rsp) + movq %r12,TF_R12(%rsp) + movq %r13,TF_R13(%rsp) + movq %r14,TF_R14(%rsp) + movq %r15,TF_R15(%rsp) + movw %fs,TF_FS(%rsp) + movw %gs,TF_GS(%rsp) + movw %es,TF_ES(%rsp) + movw %ds,TF_DS(%rsp) + movl $TF_HASSEGS,TF_FLAGS(%rsp) + cld + testb $SEL_RPL_MASK,TF_CS(%rsp) + jnz dbg_fromuserspace + /* + * We've interrupted the kernel. Preserve GS.base in %r12. + */ + movl $MSR_GSBASE,%ecx + rdmsr + movq %rax,%r12 + shlq $32,%rdx + orq %rdx,%r12 + /* Retrieve and load the canonical value for GS.base. */ + movq TF_SIZE(%rsp),%rdx + movl %edx,%eax + shrq $32,%rdx + wrmsr + FAKE_MCOUNT(TF_RIP(%rsp)) + movq %rsp,%rdi + call trap + MEXITCOUNT + /* + * Put back the preserved MSR_GSBASE value. + */ + movl $MSR_GSBASE,%ecx + movq %r12,%rdx + movl %edx,%eax + shrq $32,%rdx + wrmsr + movq TF_RDI(%rsp),%rdi + movq TF_RSI(%rsp),%rsi + movq TF_RDX(%rsp),%rdx + movq TF_RCX(%rsp),%rcx + movq TF_R8(%rsp),%r8 + movq TF_R9(%rsp),%r9 + movq TF_RAX(%rsp),%rax + movq TF_RBX(%rsp),%rbx + movq TF_RBP(%rsp),%rbp + movq TF_R10(%rsp),%r10 + movq TF_R11(%rsp),%r11 + movq TF_R12(%rsp),%r12 + movq TF_R13(%rsp),%r13 + movq TF_R14(%rsp),%r14 + movq TF_R15(%rsp),%r15 + addq $TF_RIP,%rsp + jmp doreti_iret +dbg_fromuserspace: + /* + * Switch to kernel GSBASE and kernel page table, and copy frame + * from the IST stack to the normal kernel stack, since trap() + * re-enables interrupts, and since we might trap on DB# while + * in trap(). + */ + swapgs + movq PCPU(RSP0),%rax + movl $TF_SIZE,%ecx + subq %rcx,%rax + movq %rax,%rdi + movq %rsp,%rsi + rep;movsb + movq %rax,%rsp + movq PCPU(CURPCB),%rdi + orl $PCB_FULL_IRET,PCB_FLAGS(%rdi) + jmp calltrap /* * NMI handling is special. * * First, NMIs do not respect the state of the processor's RFLAGS.IF * bit. The NMI handler may be entered at any time, including when * the processor is in a critical section with RFLAGS.IF == 0. * The processor's GS.base value could be invalid on entry to the * handler. * * Second, the processor treats NMIs specially, blocking further NMIs * until an 'iretq' instruction is executed. We thus need to execute * the NMI handler with interrupts disabled, to prevent a nested interrupt * from executing an 'iretq' instruction and inadvertently taking the * processor out of NMI mode. * * Third, the NMI handler runs on its own stack (tss_ist2). The canonical * GS.base value for the processor is stored just above the bottom of its * NMI stack. For NMIs taken from kernel mode, the current value in * the processor's GS.base is saved at entry to C-preserved register %r12, * the canonical value for GS.base is then loaded into the processor, and * the saved value is restored at exit time. For NMIs taken from user mode, * the cheaper 'SWAPGS' instructions are used for swapping GS.base. */ IDTVEC(nmi) subq $TF_RIP,%rsp movl $(T_NMI),TF_TRAPNO(%rsp) movq $0,TF_ADDR(%rsp) movq $0,TF_ERR(%rsp) movq %rdi,TF_RDI(%rsp) movq %rsi,TF_RSI(%rsp) movq %rdx,TF_RDX(%rsp) movq %rcx,TF_RCX(%rsp) movq %r8,TF_R8(%rsp) movq %r9,TF_R9(%rsp) movq %rax,TF_RAX(%rsp) movq %rbx,TF_RBX(%rsp) movq %rbp,TF_RBP(%rsp) movq %r10,TF_R10(%rsp) movq %r11,TF_R11(%rsp) movq %r12,TF_R12(%rsp) movq %r13,TF_R13(%rsp) movq %r14,TF_R14(%rsp) movq %r15,TF_R15(%rsp) movw %fs,TF_FS(%rsp) movw %gs,TF_GS(%rsp) movw %es,TF_ES(%rsp) movw %ds,TF_DS(%rsp) movl $TF_HASSEGS,TF_FLAGS(%rsp) cld xorl %ebx,%ebx testb $SEL_RPL_MASK,TF_CS(%rsp) jnz nmi_fromuserspace /* * We've interrupted the kernel. Preserve GS.base in %r12. */ movl $MSR_GSBASE,%ecx rdmsr movq %rax,%r12 shlq $32,%rdx orq %rdx,%r12 /* Retrieve and load the canonical value for GS.base. */ movq TF_SIZE(%rsp),%rdx movl %edx,%eax shrq $32,%rdx wrmsr jmp nmi_calltrap nmi_fromuserspace: incl %ebx swapgs /* Note: this label is also used by ddb and gdb: */ nmi_calltrap: FAKE_MCOUNT(TF_RIP(%rsp)) movq %rsp,%rdi call trap MEXITCOUNT #ifdef HWPMC_HOOKS /* * Capture a userspace callchain if needed. * * - Check if the current trap was from user mode. * - Check if the current thread is valid. * - Check if the thread requires a user call chain to be * captured. * * We are still in NMI mode at this point. */ testl %ebx,%ebx jz nocallchain /* not from userspace */ movq PCPU(CURTHREAD),%rax orq %rax,%rax /* curthread present? */ jz nocallchain testl $TDP_CALLCHAIN,TD_PFLAGS(%rax) /* flagged for capture? */ jz nocallchain /* * A user callchain is to be captured, so: * - Move execution to the regular kernel stack, to allow for * nested NMI interrupts. * - Take the processor out of "NMI" mode by faking an "iret". * - Enable interrupts, so that copyin() can work. */ movq %rsp,%rsi /* source stack pointer */ movq $TF_SIZE,%rcx movq PCPU(RSP0),%rdx subq %rcx,%rdx movq %rdx,%rdi /* destination stack pointer */ shrq $3,%rcx /* trap frame size in long words */ cld rep movsq /* copy trapframe */ movl %ss,%eax pushq %rax /* tf_ss */ pushq %rdx /* tf_rsp (on kernel stack) */ pushfq /* tf_rflags */ movl %cs,%eax pushq %rax /* tf_cs */ pushq $outofnmi /* tf_rip */ iretq outofnmi: /* * At this point the processor has exited NMI mode and is running * with interrupts turned off on the normal kernel stack. * * If a pending NMI gets recognized at or after this point, it * will cause a kernel callchain to be traced. * * We turn interrupts back on, and call the user callchain capture hook. */ movq pmc_hook,%rax orq %rax,%rax jz nocallchain movq PCPU(CURTHREAD),%rdi /* thread */ movq $PMC_FN_USER_CALLCHAIN,%rsi /* command */ movq %rsp,%rdx /* frame */ sti call *%rax cli nocallchain: #endif testl %ebx,%ebx jnz doreti_exit nmi_kernelexit: /* * Put back the preserved MSR_GSBASE value. */ movl $MSR_GSBASE,%ecx movq %r12,%rdx movl %edx,%eax shrq $32,%rdx wrmsr nmi_restoreregs: movq TF_RDI(%rsp),%rdi movq TF_RSI(%rsp),%rsi movq TF_RDX(%rsp),%rdx movq TF_RCX(%rsp),%rcx movq TF_R8(%rsp),%r8 movq TF_R9(%rsp),%r9 movq TF_RAX(%rsp),%rax movq TF_RBX(%rsp),%rbx movq TF_RBP(%rsp),%rbp movq TF_R10(%rsp),%r10 movq TF_R11(%rsp),%r11 movq TF_R12(%rsp),%r12 movq TF_R13(%rsp),%r13 movq TF_R14(%rsp),%r14 movq TF_R15(%rsp),%r15 addq $TF_RIP,%rsp jmp doreti_iret ENTRY(fork_trampoline) movq %r12,%rdi /* function */ movq %rbx,%rsi /* arg1 */ movq %rsp,%rdx /* trapframe pointer */ call fork_exit MEXITCOUNT jmp doreti /* Handle any ASTs */ /* * To efficiently implement classification of trap and interrupt handlers * for profiling, there must be only trap handlers between the labels btrap * and bintr, and only interrupt handlers between the labels bintr and * eintr. This is implemented (partly) by including files that contain * some of the handlers. Before including the files, set up a normal asm * environment so that the included files doen't need to know that they are * included. */ #ifdef COMPAT_FREEBSD32 .data .p2align 4 .text SUPERALIGN_TEXT #include #endif .data .p2align 4 .text SUPERALIGN_TEXT MCOUNT_LABEL(bintr) #include #ifdef DEV_ATPIC .data .p2align 4 .text SUPERALIGN_TEXT #include #endif .text MCOUNT_LABEL(eintr) /* * void doreti(struct trapframe) * * Handle return from interrupts, traps and syscalls. */ .text SUPERALIGN_TEXT .type doreti,@function .globl doreti doreti: FAKE_MCOUNT($bintr) /* init "from" bintr -> doreti */ /* * Check if ASTs can be handled now. */ testb $SEL_RPL_MASK,TF_CS(%rsp) /* are we returning to user mode? */ jz doreti_exit /* can't handle ASTs now if not */ doreti_ast: /* * Check for ASTs atomically with returning. Disabling CPU * interrupts provides sufficient locking even in the SMP case, * since we will be informed of any new ASTs by an IPI. */ cli movq PCPU(CURTHREAD),%rax testl $TDF_ASTPENDING | TDF_NEEDRESCHED,TD_FLAGS(%rax) je doreti_exit sti movq %rsp,%rdi /* pass a pointer to the trapframe */ call ast jmp doreti_ast /* * doreti_exit: pop registers, iret. * * The segment register pop is a special case, since it may * fault if (for example) a sigreturn specifies bad segment * registers. The fault is handled in trap.c. */ doreti_exit: MEXITCOUNT movq PCPU(CURPCB),%r8 /* * Do not reload segment registers for kernel. * Since we do not reload segments registers with sane * values on kernel entry, descriptors referenced by * segments registers might be not valid. This is fatal * for user mode, but is not a problem for the kernel. */ testb $SEL_RPL_MASK,TF_CS(%rsp) jz ld_regs testl $PCB_FULL_IRET,PCB_FLAGS(%r8) jz ld_regs testl $TF_HASSEGS,TF_FLAGS(%rsp) je set_segs do_segs: /* Restore %fs and fsbase */ movw TF_FS(%rsp),%ax .globl ld_fs ld_fs: movw %ax,%fs cmpw $KUF32SEL,%ax jne 1f movl $MSR_FSBASE,%ecx movl PCB_FSBASE(%r8),%eax movl PCB_FSBASE+4(%r8),%edx .globl ld_fsbase ld_fsbase: wrmsr 1: /* Restore %gs and gsbase */ movw TF_GS(%rsp),%si pushfq cli movl $MSR_GSBASE,%ecx /* Save current kernel %gs base into %r12d:%r13d */ rdmsr movl %eax,%r12d movl %edx,%r13d .globl ld_gs ld_gs: movw %si,%gs /* Save user %gs base into %r14d:%r15d */ rdmsr movl %eax,%r14d movl %edx,%r15d /* Restore kernel %gs base */ movl %r12d,%eax movl %r13d,%edx wrmsr popfq /* * Restore user %gs base, either from PCB if used for TLS, or * from the previously saved msr read. */ movl $MSR_KGSBASE,%ecx cmpw $KUG32SEL,%si jne 1f movl PCB_GSBASE(%r8),%eax movl PCB_GSBASE+4(%r8),%edx jmp ld_gsbase 1: movl %r14d,%eax movl %r15d,%edx .globl ld_gsbase ld_gsbase: wrmsr /* May trap if non-canonical, but only for TLS. */ .globl ld_es ld_es: movw TF_ES(%rsp),%es .globl ld_ds ld_ds: movw TF_DS(%rsp),%ds ld_regs: movq TF_RDI(%rsp),%rdi movq TF_RSI(%rsp),%rsi movq TF_RDX(%rsp),%rdx movq TF_RCX(%rsp),%rcx movq TF_R8(%rsp),%r8 movq TF_R9(%rsp),%r9 movq TF_RAX(%rsp),%rax movq TF_RBX(%rsp),%rbx movq TF_RBP(%rsp),%rbp movq TF_R10(%rsp),%r10 movq TF_R11(%rsp),%r11 movq TF_R12(%rsp),%r12 movq TF_R13(%rsp),%r13 movq TF_R14(%rsp),%r14 movq TF_R15(%rsp),%r15 testb $SEL_RPL_MASK,TF_CS(%rsp) /* Did we come from kernel? */ jz 1f /* keep running with kernel GS.base */ cli swapgs 1: addq $TF_RIP,%rsp /* skip over tf_err, tf_trapno */ .globl doreti_iret doreti_iret: iretq set_segs: movw $KUDSEL,%ax movw %ax,TF_DS(%rsp) movw %ax,TF_ES(%rsp) movw $KUF32SEL,TF_FS(%rsp) movw $KUG32SEL,TF_GS(%rsp) jmp do_segs /* * doreti_iret_fault. Alternative return code for * the case where we get a fault in the doreti_exit code * above. trap() (amd64/amd64/trap.c) catches this specific * case, sends the process a signal and continues in the * corresponding place in the code below. */ ALIGN_TEXT .globl doreti_iret_fault doreti_iret_fault: subq $TF_RIP,%rsp /* space including tf_err, tf_trapno */ testl $PSL_I,TF_RFLAGS(%rsp) jz 1f sti 1: movw %fs,TF_FS(%rsp) movw %gs,TF_GS(%rsp) movw %es,TF_ES(%rsp) movw %ds,TF_DS(%rsp) movl $TF_HASSEGS,TF_FLAGS(%rsp) movq %rdi,TF_RDI(%rsp) movq %rsi,TF_RSI(%rsp) movq %rdx,TF_RDX(%rsp) movq %rcx,TF_RCX(%rsp) movq %r8,TF_R8(%rsp) movq %r9,TF_R9(%rsp) movq %rax,TF_RAX(%rsp) movq %rbx,TF_RBX(%rsp) movq %rbp,TF_RBP(%rsp) movq %r10,TF_R10(%rsp) movq %r11,TF_R11(%rsp) movq %r12,TF_R12(%rsp) movq %r13,TF_R13(%rsp) movq %r14,TF_R14(%rsp) movq %r15,TF_R15(%rsp) movl $T_PROTFLT,TF_TRAPNO(%rsp) movq $0,TF_ERR(%rsp) /* XXX should be the error code */ movq $0,TF_ADDR(%rsp) FAKE_MCOUNT(TF_RIP(%rsp)) jmp calltrap ALIGN_TEXT .globl ds_load_fault ds_load_fault: movl $T_PROTFLT,TF_TRAPNO(%rsp) testl $PSL_I,TF_RFLAGS(%rsp) jz 1f sti 1: movq %rsp,%rdi call trap movw $KUDSEL,TF_DS(%rsp) jmp doreti ALIGN_TEXT .globl es_load_fault es_load_fault: movl $T_PROTFLT,TF_TRAPNO(%rsp) testl $PSL_I,TF_RFLAGS(%rsp) jz 1f sti 1: movq %rsp,%rdi call trap movw $KUDSEL,TF_ES(%rsp) jmp doreti ALIGN_TEXT .globl fs_load_fault fs_load_fault: testl $PSL_I,TF_RFLAGS(%rsp) jz 1f sti 1: movl $T_PROTFLT,TF_TRAPNO(%rsp) movq %rsp,%rdi call trap movw $KUF32SEL,TF_FS(%rsp) jmp doreti ALIGN_TEXT .globl gs_load_fault gs_load_fault: popfq movl $T_PROTFLT,TF_TRAPNO(%rsp) testl $PSL_I,TF_RFLAGS(%rsp) jz 1f sti 1: movq %rsp,%rdi call trap movw $KUG32SEL,TF_GS(%rsp) jmp doreti ALIGN_TEXT .globl fsbase_load_fault fsbase_load_fault: movl $T_PROTFLT,TF_TRAPNO(%rsp) testl $PSL_I,TF_RFLAGS(%rsp) jz 1f sti 1: movq %rsp,%rdi call trap movq PCPU(CURTHREAD),%r8 movq TD_PCB(%r8),%r8 movq $0,PCB_FSBASE(%r8) jmp doreti ALIGN_TEXT .globl gsbase_load_fault gsbase_load_fault: movl $T_PROTFLT,TF_TRAPNO(%rsp) testl $PSL_I,TF_RFLAGS(%rsp) jz 1f sti 1: movq %rsp,%rdi call trap movq PCPU(CURTHREAD),%r8 movq TD_PCB(%r8),%r8 movq $0,PCB_GSBASE(%r8) jmp doreti #ifdef HWPMC_HOOKS ENTRY(end_exceptions) #endif Index: stable/10/sys/amd64/amd64/machdep.c =================================================================== --- stable/10/sys/amd64/amd64/machdep.c (revision 333369) +++ stable/10/sys/amd64/amd64/machdep.c (revision 333370) @@ -1,2793 +1,2801 @@ /*- * Copyright (c) 2003 Peter Wemm. * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_atalk.h" #include "opt_atpic.h" #include "opt_compat.h" #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_inet.h" #include "opt_ipx.h" #include "opt_isa.h" #include "opt_kstack_pages.h" #include "opt_maxmem.h" #include "opt_mp_watchdog.h" #include "opt_perfmon.h" #include "opt_platform.h" #include "opt_sched.h" #include "opt_kdtrace.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #ifndef KDB #error KDB must be enabled in order for DDB to work! #endif #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef PERFMON #include #endif #include #ifdef SMP #include #endif #ifdef FDT #include #endif #ifdef DEV_ATPIC #include #else #include #endif #include #include /* Sanity check for __curthread() */ CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); extern u_int64_t hammer_time(u_int64_t, u_int64_t); #define CS_SECURE(cs) (ISPL(cs) == SEL_UPL) #define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0) static void cpu_startup(void *); static void get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave, size_t xfpusave_len); static int set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate, size_t xfpustate_len); SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); /* * The file "conf/ldscript.amd64" defines the symbol "kernphys". Its value is * the physical address at which the kernel is loaded. */ extern char kernphys[]; #ifdef DDB extern vm_offset_t ksym_start, ksym_end; #endif struct msgbuf *msgbufp; /* Intel ICH registers */ #define ICH_PMBASE 0x400 #define ICH_SMI_EN ICH_PMBASE + 0x30 int _udatasel, _ucodesel, _ucode32sel, _ufssel, _ugssel; int cold = 1; long Maxmem = 0; long realmem = 0; /* * The number of PHYSMAP entries must be one less than the number of * PHYSSEG entries because the PHYSMAP entry that spans the largest * physical address that is accessible by ISA DMA is split into two * PHYSSEG entries. */ #define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1)) vm_paddr_t phys_avail[PHYSMAP_SIZE + 2]; vm_paddr_t dump_avail[PHYSMAP_SIZE + 2]; /* must be 2 less so 0 0 can signal end of chunks */ #define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(phys_avail[0])) - 2) #define DUMP_AVAIL_ARRAY_END ((sizeof(dump_avail) / sizeof(dump_avail[0])) - 2) struct kva_md_info kmi; static struct trapframe proc0_tf; struct region_descriptor r_gdt, r_idt; struct pcpu __pcpu[MAXCPU]; struct mtx icu_lock; struct mem_range_softc mem_range_softc; struct mtx dt_lock; /* lock for GDT and LDT */ void (*vmm_resume_p)(void); static void cpu_startup(dummy) void *dummy; { uintmax_t memsize; char *sysenv; /* * On MacBooks, we need to disallow the legacy USB circuit to * generate an SMI# because this can cause several problems, * namely: incorrect CPU frequency detection and failure to * start the APs. * We do this by disabling a bit in the SMI_EN (SMI Control and * Enable register) of the Intel ICH LPC Interface Bridge. */ sysenv = getenv("smbios.system.product"); if (sysenv != NULL) { if (strncmp(sysenv, "MacBook1,1", 10) == 0 || strncmp(sysenv, "MacBook3,1", 10) == 0 || strncmp(sysenv, "MacBook4,1", 10) == 0 || strncmp(sysenv, "MacBookPro1,1", 13) == 0 || strncmp(sysenv, "MacBookPro1,2", 13) == 0 || strncmp(sysenv, "MacBookPro3,1", 13) == 0 || strncmp(sysenv, "MacBookPro4,1", 13) == 0 || strncmp(sysenv, "Macmini1,1", 10) == 0) { if (bootverbose) printf("Disabling LEGACY_USB_EN bit on " "Intel ICH.\n"); outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); } freeenv(sysenv); } /* * Good {morning,afternoon,evening,night}. */ startrtclock(); printcpuinfo(); panicifcpuunsupported(); #ifdef PERFMON perfmon_init(); #endif /* * Display physical memory if SMBIOS reports reasonable amount. */ memsize = 0; sysenv = getenv("smbios.memory.enabled"); if (sysenv != NULL) { memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; freeenv(sysenv); } if (memsize < ptoa((uintmax_t)cnt.v_free_count)) memsize = ptoa((uintmax_t)Maxmem); printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); realmem = atop(memsize); /* * Display any holes after the first chunk of extended memory. */ if (bootverbose) { int indx; printf("Physical memory chunk(s):\n"); for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { vm_paddr_t size; size = phys_avail[indx + 1] - phys_avail[indx]; printf( "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", (uintmax_t)phys_avail[indx], (uintmax_t)phys_avail[indx + 1] - 1, (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); } } vm_ksubmap_init(&kmi); printf("avail memory = %ju (%ju MB)\n", ptoa((uintmax_t)cnt.v_free_count), ptoa((uintmax_t)cnt.v_free_count) / 1048576); /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); vm_pager_bufferinit(); cpu_setregs(); } /* * Send an interrupt to process. * * Stack is set up to allow sigcode stored * at top to call routine, followed by call * to sigreturn routine below. After sigreturn * resets the signal mask, the stack, and the * frame pointer, it returns to the user * specified pc, psl. */ void sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) { struct sigframe sf, *sfp; struct pcb *pcb; struct proc *p; struct thread *td; struct sigacts *psp; char *sp; struct trapframe *regs; char *xfpusave; size_t xfpusave_len; int sig; int oonstack; td = curthread; pcb = td->td_pcb; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); sig = ksi->ksi_signo; psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); regs = td->td_frame; oonstack = sigonstack(regs->tf_rsp); if (cpu_max_ext_state_size > sizeof(struct savefpu) && use_xsave) { xfpusave_len = cpu_max_ext_state_size - sizeof(struct savefpu); xfpusave = __builtin_alloca(xfpusave_len); } else { xfpusave_len = 0; xfpusave = NULL; } /* Save user context. */ bzero(&sf, sizeof(sf)); sf.sf_uc.uc_sigmask = *mask; sf.sf_uc.uc_stack = td->td_sigstk; sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; bcopy(regs, &sf.sf_uc.uc_mcontext.mc_rdi, sizeof(*regs)); sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ get_fpcontext(td, &sf.sf_uc.uc_mcontext, xfpusave, xfpusave_len); fpstate_drop(td); sf.sf_uc.uc_mcontext.mc_fsbase = pcb->pcb_fsbase; sf.sf_uc.uc_mcontext.mc_gsbase = pcb->pcb_gsbase; bzero(sf.sf_uc.uc_mcontext.mc_spare, sizeof(sf.sf_uc.uc_mcontext.mc_spare)); bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__)); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { sp = td->td_sigstk.ss_sp + td->td_sigstk.ss_size; #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else sp = (char *)regs->tf_rsp - 128; if (xfpusave != NULL) { sp -= xfpusave_len; sp = (char *)((unsigned long)sp & ~0x3Ful); sf.sf_uc.uc_mcontext.mc_xfpustate = (register_t)sp; } sp -= sizeof(struct sigframe); /* Align to 16 bytes. */ sfp = (struct sigframe *)((unsigned long)sp & ~0xFul); /* Build the argument list for the signal handler. */ regs->tf_rdi = sig; /* arg 1 in %rdi */ regs->tf_rdx = (register_t)&sfp->sf_uc; /* arg 3 in %rdx */ bzero(&sf.sf_si, sizeof(sf.sf_si)); if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ regs->tf_rsi = (register_t)&sfp->sf_si; /* arg 2 in %rsi */ sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; /* Fill in POSIX parts */ sf.sf_si = ksi->ksi_info; sf.sf_si.si_signo = sig; /* maybe a translated signal */ regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ } else { /* Old FreeBSD-style arguments. */ regs->tf_rsi = ksi->ksi_code; /* arg 2 in %rsi */ regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, sfp, sizeof(*sfp)) != 0 || (xfpusave != NULL && copyout(xfpusave, (void *)sf.sf_uc.uc_mcontext.mc_xfpustate, xfpusave_len) != 0)) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_rsp = (long)sfp; regs->tf_rip = p->p_sysent->sv_sigcode_base; regs->tf_rflags &= ~(PSL_T | PSL_D); regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_ss = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _ufssel; regs->tf_gs = _ugssel; regs->tf_flags = TF_HASSEGS; set_pcb_flags(pcb, PCB_FULL_IRET); PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } /* * System call to cleanup state after a signal * has been taken. Reset signal mask and * stack state from context left by sendsig (above). * Return to previous pc and psl as specified by * context left by sendsig. Check carefully to * make sure that the user has not modified the * state to gain improper privileges. * * MPSAFE */ int sys_sigreturn(td, uap) struct thread *td; struct sigreturn_args /* { const struct __ucontext *sigcntxp; } */ *uap; { ucontext_t uc; struct pcb *pcb; struct proc *p; struct trapframe *regs; ucontext_t *ucp; char *xfpustate; size_t xfpustate_len; long rflags; int cs, error, ret; ksiginfo_t ksi; pcb = td->td_pcb; p = td->td_proc; error = copyin(uap->sigcntxp, &uc, sizeof(uc)); if (error != 0) { uprintf("pid %d (%s): sigreturn copyin failed\n", p->p_pid, td->td_name); return (error); } ucp = &uc; if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) { uprintf("pid %d (%s): sigreturn mc_flags %x\n", p->p_pid, td->td_name, ucp->uc_mcontext.mc_flags); return (EINVAL); } regs = td->td_frame; rflags = ucp->uc_mcontext.mc_rflags; /* * Don't allow users to change privileged or reserved flags. */ if (!EFL_SECURE(rflags, regs->tf_rflags)) { uprintf("pid %d (%s): sigreturn rflags = 0x%lx\n", p->p_pid, td->td_name, rflags); return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ cs = ucp->uc_mcontext.mc_cs; if (!CS_SECURE(cs)) { uprintf("pid %d (%s): sigreturn cs = 0x%x\n", p->p_pid, td->td_name, cs); ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_trapno = T_PROTFLT; ksi.ksi_addr = (void *)regs->tf_rip; trapsignal(td, &ksi); return (EINVAL); } if ((uc.uc_mcontext.mc_flags & _MC_HASFPXSTATE) != 0) { xfpustate_len = uc.uc_mcontext.mc_xfpustate_len; if (xfpustate_len > cpu_max_ext_state_size - sizeof(struct savefpu)) { uprintf("pid %d (%s): sigreturn xfpusave_len = 0x%zx\n", p->p_pid, td->td_name, xfpustate_len); return (EINVAL); } xfpustate = __builtin_alloca(xfpustate_len); error = copyin((const void *)uc.uc_mcontext.mc_xfpustate, xfpustate, xfpustate_len); if (error != 0) { uprintf( "pid %d (%s): sigreturn copying xfpustate failed\n", p->p_pid, td->td_name); return (error); } } else { xfpustate = NULL; xfpustate_len = 0; } ret = set_fpcontext(td, &ucp->uc_mcontext, xfpustate, xfpustate_len); if (ret != 0) { uprintf("pid %d (%s): sigreturn set_fpcontext err %d\n", p->p_pid, td->td_name, ret); return (ret); } bcopy(&ucp->uc_mcontext.mc_rdi, regs, sizeof(*regs)); pcb->pcb_fsbase = ucp->uc_mcontext.mc_fsbase; pcb->pcb_gsbase = ucp->uc_mcontext.mc_gsbase; #if defined(COMPAT_43) if (ucp->uc_mcontext.mc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); set_pcb_flags(pcb, PCB_FULL_IRET); return (EJUSTRETURN); } #ifdef COMPAT_FREEBSD4 int freebsd4_sigreturn(struct thread *td, struct freebsd4_sigreturn_args *uap) { return sys_sigreturn(td, (struct sigreturn_args *)uap); } #endif /* * Machine dependent boot() routine * * I haven't seen anything to put here yet * Possibly some stuff might be grafted back here from boot() */ void cpu_boot(int howto) { } /* * Flush the D-cache for non-DMA I/O so that the I-cache can * be made coherent later. */ void cpu_flush_dcache(void *ptr, size_t len) { /* Not applicable */ } /* Get current clock frequency for the given cpu id. */ int cpu_est_clockrate(int cpu_id, uint64_t *rate) { uint64_t tsc1, tsc2; uint64_t acnt, mcnt, perf; register_t reg; if (pcpu_find(cpu_id) == NULL || rate == NULL) return (EINVAL); /* * If TSC is P-state invariant and APERF/MPERF MSRs do not exist, * DELAY(9) based logic fails. */ if (tsc_is_invariant && !tsc_perf_stat) return (EOPNOTSUPP); #ifdef SMP if (smp_cpus > 1) { /* Schedule ourselves on the indicated cpu. */ thread_lock(curthread); sched_bind(curthread, cpu_id); thread_unlock(curthread); } #endif /* Calibrate by measuring a short delay. */ reg = intr_disable(); if (tsc_is_invariant) { wrmsr(MSR_MPERF, 0); wrmsr(MSR_APERF, 0); tsc1 = rdtsc(); DELAY(1000); mcnt = rdmsr(MSR_MPERF); acnt = rdmsr(MSR_APERF); tsc2 = rdtsc(); intr_restore(reg); perf = 1000 * acnt / mcnt; *rate = (tsc2 - tsc1) * perf; } else { tsc1 = rdtsc(); DELAY(1000); tsc2 = rdtsc(); intr_restore(reg); *rate = (tsc2 - tsc1) * 1000; } #ifdef SMP if (smp_cpus > 1) { thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); } #endif return (0); } /* * Shutdown the CPU as much as possible */ void cpu_halt(void) { for (;;) halt(); } void (*cpu_idle_hook)(sbintime_t) = NULL; /* ACPI idle hook. */ static int cpu_ident_amdc1e = 0; /* AMD C1E supported. */ static int idle_mwait = 1; /* Use MONITOR/MWAIT for short idle. */ TUNABLE_INT("machdep.idle_mwait", &idle_mwait); SYSCTL_INT(_machdep, OID_AUTO, idle_mwait, CTLFLAG_RW, &idle_mwait, 0, "Use MONITOR/MWAIT for short idle"); #define STATE_RUNNING 0x0 #define STATE_MWAIT 0x1 #define STATE_SLEEPING 0x2 static void cpu_idle_acpi(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_SLEEPING; /* See comments in cpu_idle_hlt(). */ disable_intr(); if (sched_runnable()) enable_intr(); else if (cpu_idle_hook) cpu_idle_hook(sbt); else __asm __volatile("sti; hlt"); *state = STATE_RUNNING; } static void cpu_idle_hlt(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_SLEEPING; /* * Since we may be in a critical section from cpu_idle(), if * an interrupt fires during that critical section we may have * a pending preemption. If the CPU halts, then that thread * may not execute until a later interrupt awakens the CPU. * To handle this race, check for a runnable thread after * disabling interrupts and immediately return if one is * found. Also, we must absolutely guarentee that hlt is * the next instruction after sti. This ensures that any * interrupt that fires after the call to disable_intr() will * immediately awaken the CPU from hlt. Finally, please note * that on x86 this works fine because of interrupts enabled only * after the instruction following sti takes place, while IF is set * to 1 immediately, allowing hlt instruction to acknowledge the * interrupt. */ disable_intr(); if (sched_runnable()) enable_intr(); else __asm __volatile("sti; hlt"); *state = STATE_RUNNING; } static void cpu_idle_mwait(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_MWAIT; /* See comments in cpu_idle_hlt(). */ disable_intr(); if (sched_runnable()) { enable_intr(); *state = STATE_RUNNING; return; } cpu_monitor(state, 0, 0); if (*state == STATE_MWAIT) __asm __volatile("sti; mwait" : : "a" (MWAIT_C1), "c" (0)); else enable_intr(); *state = STATE_RUNNING; } static void cpu_idle_spin(sbintime_t sbt) { int *state; int i; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_RUNNING; /* * The sched_runnable() call is racy but as long as there is * a loop missing it one time will have just a little impact if any * (and it is much better than missing the check at all). */ for (i = 0; i < 1000; i++) { if (sched_runnable()) return; cpu_spinwait(); } } /* * C1E renders the local APIC timer dead, so we disable it by * reading the Interrupt Pending Message register and clearing * both C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27). * * Reference: * "BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors" * #32559 revision 3.00+ */ #define MSR_AMDK8_IPM 0xc0010055 #define AMDK8_SMIONCMPHALT (1ULL << 27) #define AMDK8_C1EONCMPHALT (1ULL << 28) #define AMDK8_CMPHALT (AMDK8_SMIONCMPHALT | AMDK8_C1EONCMPHALT) static void cpu_probe_amdc1e(void) { /* * Detect the presence of C1E capability mostly on latest * dual-cores (or future) k8 family. */ if (cpu_vendor_id == CPU_VENDOR_AMD && (cpu_id & 0x00000f00) == 0x00000f00 && (cpu_id & 0x0fff0000) >= 0x00040000) { cpu_ident_amdc1e = 1; } } void (*cpu_idle_fn)(sbintime_t) = cpu_idle_acpi; void cpu_idle(int busy) { uint64_t msr; sbintime_t sbt = -1; CTR2(KTR_SPARE2, "cpu_idle(%d) at %d", busy, curcpu); #ifdef MP_WATCHDOG ap_watchdog(PCPU_GET(cpuid)); #endif /* If we are busy - try to use fast methods. */ if (busy) { if ((cpu_feature2 & CPUID2_MON) && idle_mwait) { cpu_idle_mwait(busy); goto out; } } /* If we have time - switch timers into idle mode. */ if (!busy) { critical_enter(); sbt = cpu_idleclock(); } /* Apply AMD APIC timer C1E workaround. */ if (cpu_ident_amdc1e && cpu_disable_c3_sleep) { msr = rdmsr(MSR_AMDK8_IPM); if (msr & AMDK8_CMPHALT) wrmsr(MSR_AMDK8_IPM, msr & ~AMDK8_CMPHALT); } /* Call main idle method. */ cpu_idle_fn(sbt); /* Switch timers mack into active mode. */ if (!busy) { cpu_activeclock(); critical_exit(); } out: CTR2(KTR_SPARE2, "cpu_idle(%d) at %d done", busy, curcpu); } int cpu_idle_wakeup(int cpu) { struct pcpu *pcpu; int *state; pcpu = pcpu_find(cpu); state = (int *)pcpu->pc_monitorbuf; /* * This doesn't need to be atomic since missing the race will * simply result in unnecessary IPIs. */ if (*state == STATE_SLEEPING) return (0); if (*state == STATE_MWAIT) *state = STATE_RUNNING; return (1); } /* * Ordered by speed/power consumption. */ struct { void *id_fn; char *id_name; } idle_tbl[] = { { cpu_idle_spin, "spin" }, { cpu_idle_mwait, "mwait" }, { cpu_idle_hlt, "hlt" }, { cpu_idle_acpi, "acpi" }, { NULL, NULL } }; static int idle_sysctl_available(SYSCTL_HANDLER_ARGS) { char *avail, *p; int error; int i; avail = malloc(256, M_TEMP, M_WAITOK); p = avail; for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (strstr(idle_tbl[i].id_name, "mwait") && (cpu_feature2 & CPUID2_MON) == 0) continue; if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && cpu_idle_hook == NULL) continue; p += sprintf(p, "%s%s", p != avail ? ", " : "", idle_tbl[i].id_name); } error = sysctl_handle_string(oidp, avail, 0, req); free(avail, M_TEMP); return (error); } SYSCTL_PROC(_machdep, OID_AUTO, idle_available, CTLTYPE_STRING | CTLFLAG_RD, 0, 0, idle_sysctl_available, "A", "list of available idle functions"); static int idle_sysctl(SYSCTL_HANDLER_ARGS) { char buf[16]; int error; char *p; int i; p = "unknown"; for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (idle_tbl[i].id_fn == cpu_idle_fn) { p = idle_tbl[i].id_name; break; } } strncpy(buf, p, sizeof(buf)); error = sysctl_handle_string(oidp, buf, sizeof(buf), req); if (error != 0 || req->newptr == NULL) return (error); for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (strstr(idle_tbl[i].id_name, "mwait") && (cpu_feature2 & CPUID2_MON) == 0) continue; if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && cpu_idle_hook == NULL) continue; if (strcmp(idle_tbl[i].id_name, buf)) continue; cpu_idle_fn = idle_tbl[i].id_fn; return (0); } return (EINVAL); } SYSCTL_PROC(_machdep, OID_AUTO, idle, CTLTYPE_STRING | CTLFLAG_RW, 0, 0, idle_sysctl, "A", "currently selected idle function"); /* * Reset registers to default values on exec. */ void exec_setregs(struct thread *td, struct image_params *imgp, u_long stack) { struct trapframe *regs = td->td_frame; struct pcb *pcb = td->td_pcb; mtx_lock(&dt_lock); if (td->td_proc->p_md.md_ldt != NULL) user_ldt_free(td); else mtx_unlock(&dt_lock); pcb->pcb_fsbase = 0; pcb->pcb_gsbase = 0; clear_pcb_flags(pcb, PCB_32BIT); pcb->pcb_initial_fpucw = __INITIAL_FPUCW__; set_pcb_flags(pcb, PCB_FULL_IRET); bzero((char *)regs, sizeof(struct trapframe)); regs->tf_rip = imgp->entry_addr; regs->tf_rsp = ((stack - 8) & ~0xFul) + 8; regs->tf_rdi = stack; /* argv */ regs->tf_rflags = PSL_USER | (regs->tf_rflags & PSL_T); regs->tf_ss = _udatasel; regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _ufssel; regs->tf_gs = _ugssel; regs->tf_flags = TF_HASSEGS; td->td_retval[1] = 0; /* * Reset the hardware debug registers if they were in use. * They won't have any meaning for the newly exec'd process. */ if (pcb->pcb_flags & PCB_DBREGS) { pcb->pcb_dr0 = 0; pcb->pcb_dr1 = 0; pcb->pcb_dr2 = 0; pcb->pcb_dr3 = 0; pcb->pcb_dr6 = 0; pcb->pcb_dr7 = 0; if (pcb == curpcb) { /* * Clear the debug registers on the running * CPU, otherwise they will end up affecting * the next process we switch to. */ reset_dbregs(); } clear_pcb_flags(pcb, PCB_DBREGS); } /* * Drop the FP state if we hold it, so that the process gets a * clean FP state if it uses the FPU again. */ fpstate_drop(td); } void cpu_setregs(void) { register_t cr0; cr0 = rcr0(); /* * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the * BSP. See the comments there about why we set them. */ cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; load_cr0(cr0); } /* * Initialize amd64 and configure to run kernel */ /* * Initialize segments & interrupt table */ struct user_segment_descriptor gdt[NGDT * MAXCPU];/* global descriptor tables */ static struct gate_descriptor idt0[NIDT]; struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ static char dblfault_stack[PAGE_SIZE] __aligned(16); static char nmi0_stack[PAGE_SIZE] __aligned(16); +static char dbg0_stack[PAGE_SIZE] __aligned(16); CTASSERT(sizeof(struct nmi_pcpu) == 16); struct amd64tss common_tss[MAXCPU]; /* * Software prototypes -- in more palatable form. * * Keep GUFS32, GUGS32, GUCODE32 and GUDATA at the same * slots as corresponding segments for i386 kernel. */ struct soft_segment_descriptor gdt_segs[] = { /* GNULL_SEL 0 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GNULL2_SEL 1 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUFS32_SEL 2 32 bit %gs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUGS32_SEL 3 32 bit %fs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GCODE_SEL 4 Code Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GDATA_SEL 5 Data Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GUCODE32_SEL 6 32 bit Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUDATA_SEL 7 32/64 bit Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUCODE_SEL 8 64 bit Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GPROC0_SEL 9 Proc 0 Tss Descriptor */ { .ssd_base = 0x0, .ssd_limit = sizeof(struct amd64tss) + IOPAGES * PAGE_SIZE - 1, .ssd_type = SDT_SYSTSS, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Actually, the TSS is a system descriptor which is double size */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 11 LDT Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 12 LDT Descriptor, double size */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, }; void setidt(int idx, inthand_t *func, int typ, int dpl, int ist) { struct gate_descriptor *ip; ip = idt + idx; ip->gd_looffset = (uintptr_t)func; ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL); ip->gd_ist = ist; ip->gd_xx = 0; ip->gd_type = typ; ip->gd_dpl = dpl; ip->gd_p = 1; ip->gd_hioffset = ((uintptr_t)func)>>16 ; } extern inthand_t IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), IDTVEC(xmm), IDTVEC(dblfault), #ifdef KDTRACE_HOOKS IDTVEC(dtrace_ret), #endif #ifdef XENHVM IDTVEC(xen_intr_upcall), #endif IDTVEC(fast_syscall), IDTVEC(fast_syscall32); #ifdef DDB /* * Display the index and function name of any IDT entries that don't use * the default 'rsvd' entry point. */ DB_SHOW_COMMAND(idt, db_show_idt) { struct gate_descriptor *ip; int idx; uintptr_t func; ip = idt; for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { func = ((long)ip->gd_hioffset << 16 | ip->gd_looffset); if (func != (uintptr_t)&IDTVEC(rsvd)) { db_printf("%3d\t", idx); db_printsym(func, DB_STGY_PROC); db_printf("\n"); } ip++; } } /* Show privileged registers. */ DB_SHOW_COMMAND(sysregs, db_show_sysregs) { struct { uint16_t limit; uint64_t base; } __packed idtr, gdtr; uint16_t ldt, tr; __asm __volatile("sidt %0" : "=m" (idtr)); db_printf("idtr\t0x%016lx/%04x\n", (u_long)idtr.base, (u_int)idtr.limit); __asm __volatile("sgdt %0" : "=m" (gdtr)); db_printf("gdtr\t0x%016lx/%04x\n", (u_long)gdtr.base, (u_int)gdtr.limit); __asm __volatile("sldt %0" : "=r" (ldt)); db_printf("ldtr\t0x%04x\n", ldt); __asm __volatile("str %0" : "=r" (tr)); db_printf("tr\t0x%04x\n", tr); db_printf("cr0\t0x%016lx\n", rcr0()); db_printf("cr2\t0x%016lx\n", rcr2()); db_printf("cr3\t0x%016lx\n", rcr3()); db_printf("cr4\t0x%016lx\n", rcr4()); if (rcr4() & CR4_XSAVE) db_printf("xcr0\t0x%016lx\n", rxcr(0)); db_printf("EFER\t0x%016lx\n", rdmsr(MSR_EFER)); if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX)) db_printf("FEATURES_CTL\t%016lx\n", rdmsr(MSR_IA32_FEATURE_CONTROL)); db_printf("DEBUG_CTL\t0x%016lx\n", rdmsr(MSR_DEBUGCTLMSR)); db_printf("PAT\t0x%016lx\n", rdmsr(MSR_PAT)); db_printf("GSBASE\t0x%016lx\n", rdmsr(MSR_GSBASE)); } DB_SHOW_COMMAND(dbregs, db_show_dbregs) { db_printf("dr0\t0x%016lx\n", rdr0()); db_printf("dr1\t0x%016lx\n", rdr1()); db_printf("dr2\t0x%016lx\n", rdr2()); db_printf("dr3\t0x%016lx\n", rdr3()); db_printf("dr6\t0x%016lx\n", rdr6()); db_printf("dr7\t0x%016lx\n", rdr7()); } #endif void sdtossd(sd, ssd) struct user_segment_descriptor *sd; struct soft_segment_descriptor *ssd; { ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; ssd->ssd_type = sd->sd_type; ssd->ssd_dpl = sd->sd_dpl; ssd->ssd_p = sd->sd_p; ssd->ssd_long = sd->sd_long; ssd->ssd_def32 = sd->sd_def32; ssd->ssd_gran = sd->sd_gran; } void ssdtosd(ssd, sd) struct soft_segment_descriptor *ssd; struct user_segment_descriptor *sd; { sd->sd_lobase = (ssd->ssd_base) & 0xffffff; sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff; sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; sd->sd_type = ssd->ssd_type; sd->sd_dpl = ssd->ssd_dpl; sd->sd_p = ssd->ssd_p; sd->sd_long = ssd->ssd_long; sd->sd_def32 = ssd->ssd_def32; sd->sd_gran = ssd->ssd_gran; } void ssdtosyssd(ssd, sd) struct soft_segment_descriptor *ssd; struct system_segment_descriptor *sd; { sd->sd_lobase = (ssd->ssd_base) & 0xffffff; sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful; sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; sd->sd_type = ssd->ssd_type; sd->sd_dpl = ssd->ssd_dpl; sd->sd_p = ssd->ssd_p; sd->sd_gran = ssd->ssd_gran; } #if !defined(DEV_ATPIC) && defined(DEV_ISA) #include #include /* * Return a bitmap of the current interrupt requests. This is 8259-specific * and is only suitable for use at probe time. * This is only here to pacify sio. It is NOT FATAL if this doesn't work. * It shouldn't be here. There should probably be an APIC centric * implementation in the apic driver code, if at all. */ intrmask_t isa_irq_pending(void) { u_char irr1; u_char irr2; irr1 = inb(IO_ICU1); irr2 = inb(IO_ICU2); return ((irr2 << 8) | irr1); } #endif u_int basemem; static int add_physmap_entry(uint64_t base, uint64_t length, vm_paddr_t *physmap, int *physmap_idxp) { int i, insert_idx, physmap_idx; physmap_idx = *physmap_idxp; if (length == 0) return (1); /* * Find insertion point while checking for overlap. Start off by * assuming the new entry will be added to the end. * * NB: physmap_idx points to the next free slot. */ insert_idx = physmap_idx; for (i = 0; i <= physmap_idx; i += 2) { if (base < physmap[i + 1]) { if (base + length <= physmap[i]) { insert_idx = i; break; } if (boothowto & RB_VERBOSE) printf( "Overlapping memory regions, ignoring second region\n"); return (1); } } /* See if we can prepend to the next entry. */ if (insert_idx <= physmap_idx && base + length == physmap[insert_idx]) { physmap[insert_idx] = base; return (1); } /* See if we can append to the previous entry. */ if (insert_idx > 0 && base == physmap[insert_idx - 1]) { physmap[insert_idx - 1] += length; return (1); } physmap_idx += 2; *physmap_idxp = physmap_idx; if (physmap_idx == PHYSMAP_SIZE) { printf( "Too many segments in the physical address map, giving up\n"); return (0); } /* * Move the last 'N' entries down to make room for the new * entry if needed. */ for (i = (physmap_idx - 2); i > insert_idx; i -= 2) { physmap[i] = physmap[i - 2]; physmap[i + 1] = physmap[i - 1]; } /* Insert the new entry. */ physmap[insert_idx] = base; physmap[insert_idx + 1] = base + length; return (1); } static void add_smap_entries(struct bios_smap *smapbase, vm_paddr_t *physmap, int *physmap_idx) { struct bios_smap *smap, *smapend; u_int32_t smapsize; /* * Memory map from INT 15:E820. * * subr_module.c says: * "Consumer may safely assume that size value precedes data." * ie: an int32_t immediately precedes smap. */ smapsize = *((u_int32_t *)smapbase - 1); smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); for (smap = smapbase; smap < smapend; smap++) { if (boothowto & RB_VERBOSE) printf("SMAP type=%02x base=%016lx len=%016lx\n", smap->type, smap->base, smap->length); if (smap->type != SMAP_TYPE_MEMORY) continue; if (!add_physmap_entry(smap->base, smap->length, physmap, physmap_idx)) break; } } #define efi_next_descriptor(ptr, size) \ ((struct efi_md *)(((uint8_t *) ptr) + size)) static void add_efi_map_entries(struct efi_map_header *efihdr, vm_paddr_t *physmap, int *physmap_idx) { struct efi_md *map, *p; const char *type; size_t efisz; int ndesc, i; static const char *types[] = { "Reserved", "LoaderCode", "LoaderData", "BootServicesCode", "BootServicesData", "RuntimeServicesCode", "RuntimeServicesData", "ConventionalMemory", "UnusableMemory", "ACPIReclaimMemory", "ACPIMemoryNVS", "MemoryMappedIO", "MemoryMappedIOPortSpace", "PalCode" }; /* * Memory map data provided by UEFI via the GetMemoryMap * Boot Services API. */ efisz = (sizeof(struct efi_map_header) + 0xf) & ~0xf; map = (struct efi_md *)((uint8_t *)efihdr + efisz); if (efihdr->descriptor_size == 0) return; ndesc = efihdr->memory_size / efihdr->descriptor_size; if (boothowto & RB_VERBOSE) printf("%23s %12s %12s %8s %4s\n", "Type", "Physical", "Virtual", "#Pages", "Attr"); for (i = 0, p = map; i < ndesc; i++, p = efi_next_descriptor(p, efihdr->descriptor_size)) { if (boothowto & RB_VERBOSE) { if (p->md_type <= EFI_MD_TYPE_PALCODE) type = types[p->md_type]; else type = ""; printf("%23s %012lx %12p %08lx ", type, p->md_phys, p->md_virt, p->md_pages); if (p->md_attr & EFI_MD_ATTR_UC) printf("UC "); if (p->md_attr & EFI_MD_ATTR_WC) printf("WC "); if (p->md_attr & EFI_MD_ATTR_WT) printf("WT "); if (p->md_attr & EFI_MD_ATTR_WB) printf("WB "); if (p->md_attr & EFI_MD_ATTR_UCE) printf("UCE "); if (p->md_attr & EFI_MD_ATTR_WP) printf("WP "); if (p->md_attr & EFI_MD_ATTR_RP) printf("RP "); if (p->md_attr & EFI_MD_ATTR_XP) printf("XP "); if (p->md_attr & EFI_MD_ATTR_RT) printf("RUNTIME"); printf("\n"); } switch (p->md_type) { case EFI_MD_TYPE_CODE: case EFI_MD_TYPE_DATA: case EFI_MD_TYPE_BS_CODE: case EFI_MD_TYPE_BS_DATA: case EFI_MD_TYPE_FREE: /* * We're allowed to use any entry with these types. */ break; default: continue; } if (!add_physmap_entry(p->md_phys, (p->md_pages * PAGE_SIZE), physmap, physmap_idx)) break; } } static char bootmethod[16] = ""; SYSCTL_STRING(_machdep, OID_AUTO, bootmethod, CTLFLAG_RD, bootmethod, 0, "System firmware boot method"); #define PAGES_PER_GB (1024 * 1024 * 1024 / PAGE_SIZE) /* * Populate the (physmap) array with base/bound pairs describing the * available physical memory in the system, then test this memory and * build the phys_avail array describing the actually-available memory. * * Total memory size may be set by the kernel environment variable * hw.physmem or the compile-time define MAXMEM. * * XXX first should be vm_paddr_t. */ static void getmemsize(caddr_t kmdp, u_int64_t first) { int i, physmap_idx, pa_indx, da_indx; vm_paddr_t pa, physmap[PHYSMAP_SIZE]; u_long physmem_start, physmem_tunable, memtest; pt_entry_t *pte; struct bios_smap *smapbase; struct efi_map_header *efihdr; quad_t dcons_addr, dcons_size; int page_counter; bzero(physmap, sizeof(physmap)); physmap_idx = 0; efihdr = (struct efi_map_header *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (efihdr != NULL) { add_efi_map_entries(efihdr, physmap, &physmap_idx); strlcpy(bootmethod, "UEFI", sizeof(bootmethod)); } else if (smapbase != NULL) { add_smap_entries(smapbase, physmap, &physmap_idx); strlcpy(bootmethod, "BIOS", sizeof(bootmethod)); } else { panic("No BIOS smap or EFI map info from loader!"); } physmap_idx -= 2; /* * Find the 'base memory' segment for SMP */ basemem = 0; for (i = 0; i <= physmap_idx; i += 2) { if (physmap[i] <= 0xA0000) { basemem = physmap[i + 1] / 1024; break; } } if (basemem == 0 || basemem > 640) { if (bootverbose) printf( "Memory map doesn't contain a basemem segment, faking it"); basemem = 640; } #ifdef SMP /* make hole for AP bootstrap code */ if (physmap[1] >= 0x100000000) panic("Basemem segment is not suitable for AP bootstrap code!"); physmap[1] = mp_bootaddress(physmap[1] / 1024); #endif /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) Maxmem = atop(physmem_tunable); /* * The boot memory test is disabled by default, as it takes a * significant amount of time on large-memory systems, and is * unfriendly to virtual machines as it unnecessarily touches all * pages. * * A general name is used as the code may be extended to support * additional tests beyond the current "page present" test. */ memtest = 0; TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); /* * Don't allow MAXMEM or hw.physmem to extend the amount of memory * in the system. */ if (Maxmem > atop(physmap[physmap_idx + 1])) Maxmem = atop(physmap[physmap_idx + 1]); if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* call pmap initialization to make new kernel address space */ pmap_bootstrap(&first); /* * Size up each available chunk of physical memory. * * XXX Some BIOSes corrupt low 64KB between suspend and resume. * By default, mask off the first 16 pages unless we appear to be * running in a VM. */ physmem_start = (vm_guest > VM_GUEST_NO ? 1 : 16) << PAGE_SHIFT; TUNABLE_ULONG_FETCH("hw.physmem.start", &physmem_start); if (physmap[0] < physmem_start) { if (physmem_start < PAGE_SIZE) physmap[0] = PAGE_SIZE; else if (physmem_start >= physmap[1]) physmap[0] = round_page(physmap[1] - PAGE_SIZE); else physmap[0] = round_page(physmem_start); } pa_indx = 0; da_indx = 1; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; dump_avail[da_indx] = physmap[0]; pte = CMAP1; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ page_counter = 0; if (memtest != 0) printf("Testing system memory"); for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad, full; int *ptr = (int *)CADDR1; full = FALSE; /* * block out kernel memory as not available. */ if (pa >= (vm_paddr_t)kernphys && pa < first) goto do_dump_avail; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) goto do_dump_avail; page_bad = FALSE; if (memtest == 0) goto skip_memtest; /* * Print a "." every GB to show we're making * progress. */ page_counter++; if ((page_counter % PAGES_PER_GB) == 0) printf("."); /* * map page into kernel: valid, read/write,non-cacheable */ *pte = pa | PG_V | PG_RW | PG_NC_PWT | PG_NC_PCD; invltlb(); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) page_bad = TRUE; /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) page_bad = TRUE; /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) page_bad = TRUE; /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) page_bad = TRUE; /* * Restore original value. */ *(int *)ptr = tmp; skip_memtest: /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) continue; /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ARRAY_END) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; full = TRUE; goto do_dump_avail; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; do_dump_avail: if (dump_avail[da_indx] == pa) { dump_avail[da_indx] += PAGE_SIZE; } else { da_indx++; if (da_indx == DUMP_AVAIL_ARRAY_END) { da_indx--; goto do_next; } dump_avail[da_indx++] = pa; /* start */ dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ } do_next: if (full) break; } } *pte = 0; invltlb(); if (memtest != 0) printf("\n"); /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(msgbufsize) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(msgbufsize); /* Map the message buffer. */ msgbufp = (struct msgbuf *)PHYS_TO_DMAP(phys_avail[pa_indx]); } u_int64_t hammer_time(u_int64_t modulep, u_int64_t physfree) { caddr_t kmdp; int gsel_tss, x; struct pcpu *pc; struct nmi_pcpu *np; struct xstate_hdr *xhdr; u_int64_t msr; char *env; size_t kstack0_sz; thread0.td_kstack = physfree + KERNBASE; thread0.td_kstack_pages = KSTACK_PAGES; kstack0_sz = thread0.td_kstack_pages * PAGE_SIZE; bzero((void *)thread0.td_kstack, kstack0_sz); physfree += kstack0_sz; /* * This may be done better later if it gets more high level * components in it. If so just link td->td_proc here. */ proc_linkup0(&proc0, &thread0); preload_metadata = (caddr_t)(uintptr_t)(modulep + KERNBASE); preload_bootstrap_relocate(KERNBASE); kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int); init_static_kenv(MD_FETCH(kmdp, MODINFOMD_ENVP, char *) + KERNBASE, 0); #ifdef DDB ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t); ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t); #endif identify_cpu(); identify_hypervisor(); /* Init basic tunables, hz etc */ init_param1(); /* * make gdt memory segments */ for (x = 0; x < NGDT; x++) { if (x != GPROC0_SEL && x != (GPROC0_SEL + 1) && x != GUSERLDT_SEL && x != (GUSERLDT_SEL) + 1) ssdtosd(&gdt_segs[x], &gdt[x]); } gdt_segs[GPROC0_SEL].ssd_base = (uintptr_t)&common_tss[0]; ssdtosyssd(&gdt_segs[GPROC0_SEL], (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; r_gdt.rd_base = (long) gdt; lgdt(&r_gdt); pc = &__pcpu[0]; wrmsr(MSR_FSBASE, 0); /* User value */ wrmsr(MSR_GSBASE, (u_int64_t)pc); wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */ pcpu_init(pc, 0, sizeof(struct pcpu)); dpcpu_init((void *)(physfree + KERNBASE), 0); physfree += DPCPU_SIZE; PCPU_SET(prvspace, pc); PCPU_SET(curthread, &thread0); PCPU_SET(tssp, &common_tss[0]); PCPU_SET(commontssp, &common_tss[0]); PCPU_SET(tss, (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); PCPU_SET(ldt, (struct system_segment_descriptor *)&gdt[GUSERLDT_SEL]); PCPU_SET(fs32p, &gdt[GUFS32_SEL]); PCPU_SET(gs32p, &gdt[GUGS32_SEL]); /* * Initialize mutexes. * * icu_lock: in order to allow an interrupt to occur in a critical * section, to set pcpu->ipending (etc...) properly, we * must be able to get the icu lock, so it can't be * under witness. */ mutex_init(); mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS); mtx_init(&dt_lock, "descriptor tables", NULL, MTX_DEF); /* exceptions */ for (x = 0; x < NIDT; x++) setidt(x, &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_DE, &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0); - setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 0); + setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 4); setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 2); setidt(IDT_BP, &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0); setidt(IDT_OF, &IDTVEC(ofl), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_BR, &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_UD, &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_NM, &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1); setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_TS, &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_NP, &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_SS, &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_GP, &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_PF, &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_MF, &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_AC, &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_XF, &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0); #ifdef KDTRACE_HOOKS setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), SDT_SYSIGT, SEL_UPL, 0); #endif #ifdef XENHVM setidt(IDT_EVTCHN, &IDTVEC(xen_intr_upcall), SDT_SYSIGT, SEL_UPL, 0); #endif r_idt.rd_limit = sizeof(idt0) - 1; r_idt.rd_base = (long) idt; lidt(&r_idt); /* * Initialize the i8254 before the console so that console * initialization can use DELAY(). */ i8254_init(); /* * Use vt(4) by default for UEFI boot (during the sc(4)/vt(4) * transition). */ if (kmdp != NULL && preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP) != NULL) vty_set_preferred(VTY_VT); finishidentcpu(); /* Final stage of CPU initialization */ initializecpu(); /* Initialize CPU registers */ initializecpucache(); /* doublefault stack space, runs on ist1 */ common_tss[0].tss_ist1 = (long)&dblfault_stack[sizeof(dblfault_stack)]; /* * NMI stack, runs on ist2. The pcpu pointer is stored just * above the start of the ist2 stack. */ np = ((struct nmi_pcpu *) &nmi0_stack[sizeof(nmi0_stack)]) - 1; np->np_pcpu = (register_t) pc; common_tss[0].tss_ist2 = (long) np; + + /* + * DB# stack, runs on ist4. + */ + np = ((struct nmi_pcpu *) &dbg0_stack[sizeof(dbg0_stack)]) - 1; + np->np_pcpu = (register_t) pc; + common_tss[0].tss_ist4 = (long) np; /* Set the IO permission bitmap (empty due to tss seg limit) */ common_tss[0].tss_iobase = sizeof(struct amd64tss) + IOPAGES * PAGE_SIZE; gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); ltr(gsel_tss); /* Set up the fast syscall stuff */ msr = rdmsr(MSR_EFER) | EFER_SCE; wrmsr(MSR_EFER, msr); wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall)); wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32)); msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) | ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48); wrmsr(MSR_STAR, msr); wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D); getmemsize(kmdp, physfree); init_param2(physmem); /* now running on new page tables, configured,and u/iom is accessible */ cninit(); #ifdef DEV_ISA #ifdef DEV_ATPIC elcr_probe(); atpic_startup(); #else /* Reset and mask the atpics and leave them shut down. */ atpic_reset(); /* * Point the ICU spurious interrupt vectors at the APIC spurious * interrupt handler. */ setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); #endif #else #error "have you forgotten the isa device?"; #endif kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif msgbufinit(msgbufp, msgbufsize); fpuinit(); /* * Set up thread0 pcb after fpuinit calculated pcb + fpu save * area size. Zero out the extended state header in fpu save * area. */ thread0.td_pcb = get_pcb_td(&thread0); thread0.td_pcb->pcb_save = get_pcb_user_save_td(&thread0); bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size); if (use_xsave) { xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) + 1); xhdr->xstate_bv = xsave_mask; } /* make an initial tss so cpu can get interrupt stack on syscall! */ common_tss[0].tss_rsp0 = (vm_offset_t)thread0.td_pcb; /* Ensure the stack is aligned to 16 bytes */ common_tss[0].tss_rsp0 &= ~0xFul; PCPU_SET(rsp0, common_tss[0].tss_rsp0); PCPU_SET(curpcb, thread0.td_pcb); /* transfer to user mode */ _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); _udatasel = GSEL(GUDATA_SEL, SEL_UPL); _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL); _ufssel = GSEL(GUFS32_SEL, SEL_UPL); _ugssel = GSEL(GUGS32_SEL, SEL_UPL); load_ds(_udatasel); load_es(_udatasel); load_fs(_ufssel); /* setup proc 0's pcb */ thread0.td_pcb->pcb_flags = 0; thread0.td_pcb->pcb_cr3 = KPML4phys; /* PCID 0 is reserved for kernel */ thread0.td_frame = &proc0_tf; env = getenv("kernelname"); if (env != NULL) strlcpy(kernelname, env, sizeof(kernelname)); cpu_probe_amdc1e(); #ifdef FDT x86_init_fdt(); #endif /* Location of kernel stack for locore */ return ((u_int64_t)thread0.td_pcb); } void cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) { pcpu->pc_acpi_id = 0xffffffff; } static int smap_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct bios_smap *smapbase; struct bios_smap_xattr smap; caddr_t kmdp; uint32_t *smapattr; int count, error, i; /* Retrieve the system memory map from the loader. */ kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase == NULL) return (0); smapattr = (uint32_t *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP_XATTR); count = *((uint32_t *)smapbase - 1) / sizeof(*smapbase); error = 0; for (i = 0; i < count; i++) { smap.base = smapbase[i].base; smap.length = smapbase[i].length; smap.type = smapbase[i].type; if (smapattr != NULL) smap.xattr = smapattr[i]; else smap.xattr = 0; error = SYSCTL_OUT(req, &smap, sizeof(smap)); } return (error); } SYSCTL_PROC(_machdep, OID_AUTO, smap, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0, smap_sysctl_handler, "S,bios_smap_xattr", "Raw BIOS SMAP data"); static int efi_map_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct efi_map_header *efihdr; caddr_t kmdp; uint32_t efisize; kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); efihdr = (struct efi_map_header *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP); if (efihdr == NULL) return (0); efisize = *((uint32_t *)efihdr - 1); return (SYSCTL_OUT(req, efihdr, efisize)); } SYSCTL_PROC(_machdep, OID_AUTO, efi_map, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0, efi_map_sysctl_handler, "S,efi_map_header", "Raw EFI Memory Map"); void spinlock_enter(void) { struct thread *td; register_t flags; td = curthread; if (td->td_md.md_spinlock_count == 0) { flags = intr_disable(); td->td_md.md_spinlock_count = 1; td->td_md.md_saved_flags = flags; } else td->td_md.md_spinlock_count++; critical_enter(); } void spinlock_exit(void) { struct thread *td; register_t flags; td = curthread; critical_exit(); flags = td->td_md.md_saved_flags; td->td_md.md_spinlock_count--; if (td->td_md.md_spinlock_count == 0) intr_restore(flags); } /* * Construct a PCB from a trapframe. This is called from kdb_trap() where * we want to start a backtrace from the function that caused us to enter * the debugger. We have the context in the trapframe, but base the trace * on the PCB. The PCB doesn't have to be perfect, as long as it contains * enough for a backtrace. */ void makectx(struct trapframe *tf, struct pcb *pcb) { pcb->pcb_r12 = tf->tf_r12; pcb->pcb_r13 = tf->tf_r13; pcb->pcb_r14 = tf->tf_r14; pcb->pcb_r15 = tf->tf_r15; pcb->pcb_rbp = tf->tf_rbp; pcb->pcb_rbx = tf->tf_rbx; pcb->pcb_rip = tf->tf_rip; pcb->pcb_rsp = tf->tf_rsp; } int ptrace_set_pc(struct thread *td, unsigned long addr) { td->td_frame->tf_rip = addr; set_pcb_flags(td->td_pcb, PCB_FULL_IRET); return (0); } int ptrace_single_step(struct thread *td) { td->td_frame->tf_rflags |= PSL_T; return (0); } int ptrace_clear_single_step(struct thread *td) { td->td_frame->tf_rflags &= ~PSL_T; return (0); } int fill_regs(struct thread *td, struct reg *regs) { struct trapframe *tp; tp = td->td_frame; return (fill_frame_regs(tp, regs)); } int fill_frame_regs(struct trapframe *tp, struct reg *regs) { regs->r_r15 = tp->tf_r15; regs->r_r14 = tp->tf_r14; regs->r_r13 = tp->tf_r13; regs->r_r12 = tp->tf_r12; regs->r_r11 = tp->tf_r11; regs->r_r10 = tp->tf_r10; regs->r_r9 = tp->tf_r9; regs->r_r8 = tp->tf_r8; regs->r_rdi = tp->tf_rdi; regs->r_rsi = tp->tf_rsi; regs->r_rbp = tp->tf_rbp; regs->r_rbx = tp->tf_rbx; regs->r_rdx = tp->tf_rdx; regs->r_rcx = tp->tf_rcx; regs->r_rax = tp->tf_rax; regs->r_rip = tp->tf_rip; regs->r_cs = tp->tf_cs; regs->r_rflags = tp->tf_rflags; regs->r_rsp = tp->tf_rsp; regs->r_ss = tp->tf_ss; if (tp->tf_flags & TF_HASSEGS) { regs->r_ds = tp->tf_ds; regs->r_es = tp->tf_es; regs->r_fs = tp->tf_fs; regs->r_gs = tp->tf_gs; } else { regs->r_ds = 0; regs->r_es = 0; regs->r_fs = 0; regs->r_gs = 0; } return (0); } int set_regs(struct thread *td, struct reg *regs) { struct trapframe *tp; register_t rflags; tp = td->td_frame; rflags = regs->r_rflags & 0xffffffff; if (!EFL_SECURE(rflags, tp->tf_rflags) || !CS_SECURE(regs->r_cs)) return (EINVAL); tp->tf_r15 = regs->r_r15; tp->tf_r14 = regs->r_r14; tp->tf_r13 = regs->r_r13; tp->tf_r12 = regs->r_r12; tp->tf_r11 = regs->r_r11; tp->tf_r10 = regs->r_r10; tp->tf_r9 = regs->r_r9; tp->tf_r8 = regs->r_r8; tp->tf_rdi = regs->r_rdi; tp->tf_rsi = regs->r_rsi; tp->tf_rbp = regs->r_rbp; tp->tf_rbx = regs->r_rbx; tp->tf_rdx = regs->r_rdx; tp->tf_rcx = regs->r_rcx; tp->tf_rax = regs->r_rax; tp->tf_rip = regs->r_rip; tp->tf_cs = regs->r_cs; tp->tf_rflags = rflags; tp->tf_rsp = regs->r_rsp; tp->tf_ss = regs->r_ss; if (0) { /* XXXKIB */ tp->tf_ds = regs->r_ds; tp->tf_es = regs->r_es; tp->tf_fs = regs->r_fs; tp->tf_gs = regs->r_gs; tp->tf_flags = TF_HASSEGS; } set_pcb_flags(td->td_pcb, PCB_FULL_IRET); return (0); } /* XXX check all this stuff! */ /* externalize from sv_xmm */ static void fill_fpregs_xmm(struct savefpu *sv_xmm, struct fpreg *fpregs) { struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; struct envxmm *penv_xmm = &sv_xmm->sv_env; int i; /* pcb -> fpregs */ bzero(fpregs, sizeof(*fpregs)); /* FPU control/status */ penv_fpreg->en_cw = penv_xmm->en_cw; penv_fpreg->en_sw = penv_xmm->en_sw; penv_fpreg->en_tw = penv_xmm->en_tw; penv_fpreg->en_opcode = penv_xmm->en_opcode; penv_fpreg->en_rip = penv_xmm->en_rip; penv_fpreg->en_rdp = penv_xmm->en_rdp; penv_fpreg->en_mxcsr = penv_xmm->en_mxcsr; penv_fpreg->en_mxcsr_mask = penv_xmm->en_mxcsr_mask; /* FPU registers */ for (i = 0; i < 8; ++i) bcopy(sv_xmm->sv_fp[i].fp_acc.fp_bytes, fpregs->fpr_acc[i], 10); /* SSE registers */ for (i = 0; i < 16; ++i) bcopy(sv_xmm->sv_xmm[i].xmm_bytes, fpregs->fpr_xacc[i], 16); } /* internalize from fpregs into sv_xmm */ static void set_fpregs_xmm(struct fpreg *fpregs, struct savefpu *sv_xmm) { struct envxmm *penv_xmm = &sv_xmm->sv_env; struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; int i; /* fpregs -> pcb */ /* FPU control/status */ penv_xmm->en_cw = penv_fpreg->en_cw; penv_xmm->en_sw = penv_fpreg->en_sw; penv_xmm->en_tw = penv_fpreg->en_tw; penv_xmm->en_opcode = penv_fpreg->en_opcode; penv_xmm->en_rip = penv_fpreg->en_rip; penv_xmm->en_rdp = penv_fpreg->en_rdp; penv_xmm->en_mxcsr = penv_fpreg->en_mxcsr; penv_xmm->en_mxcsr_mask = penv_fpreg->en_mxcsr_mask & cpu_mxcsr_mask; /* FPU registers */ for (i = 0; i < 8; ++i) bcopy(fpregs->fpr_acc[i], sv_xmm->sv_fp[i].fp_acc.fp_bytes, 10); /* SSE registers */ for (i = 0; i < 16; ++i) bcopy(fpregs->fpr_xacc[i], sv_xmm->sv_xmm[i].xmm_bytes, 16); } /* externalize from td->pcb */ int fill_fpregs(struct thread *td, struct fpreg *fpregs) { KASSERT(td == curthread || TD_IS_SUSPENDED(td) || P_SHOULDSTOP(td->td_proc), ("not suspended thread %p", td)); fpugetregs(td); fill_fpregs_xmm(get_pcb_user_save_td(td), fpregs); return (0); } /* internalize to td->pcb */ int set_fpregs(struct thread *td, struct fpreg *fpregs) { set_fpregs_xmm(fpregs, get_pcb_user_save_td(td)); fpuuserinited(td); return (0); } /* * Get machine context. */ int get_mcontext(struct thread *td, mcontext_t *mcp, int flags) { struct pcb *pcb; struct trapframe *tp; pcb = td->td_pcb; tp = td->td_frame; PROC_LOCK(curthread->td_proc); mcp->mc_onstack = sigonstack(tp->tf_rsp); PROC_UNLOCK(curthread->td_proc); mcp->mc_r15 = tp->tf_r15; mcp->mc_r14 = tp->tf_r14; mcp->mc_r13 = tp->tf_r13; mcp->mc_r12 = tp->tf_r12; mcp->mc_r11 = tp->tf_r11; mcp->mc_r10 = tp->tf_r10; mcp->mc_r9 = tp->tf_r9; mcp->mc_r8 = tp->tf_r8; mcp->mc_rdi = tp->tf_rdi; mcp->mc_rsi = tp->tf_rsi; mcp->mc_rbp = tp->tf_rbp; mcp->mc_rbx = tp->tf_rbx; mcp->mc_rcx = tp->tf_rcx; mcp->mc_rflags = tp->tf_rflags; if (flags & GET_MC_CLEAR_RET) { mcp->mc_rax = 0; mcp->mc_rdx = 0; mcp->mc_rflags &= ~PSL_C; } else { mcp->mc_rax = tp->tf_rax; mcp->mc_rdx = tp->tf_rdx; } mcp->mc_rip = tp->tf_rip; mcp->mc_cs = tp->tf_cs; mcp->mc_rsp = tp->tf_rsp; mcp->mc_ss = tp->tf_ss; mcp->mc_ds = tp->tf_ds; mcp->mc_es = tp->tf_es; mcp->mc_fs = tp->tf_fs; mcp->mc_gs = tp->tf_gs; mcp->mc_flags = tp->tf_flags; mcp->mc_len = sizeof(*mcp); get_fpcontext(td, mcp, NULL, 0); mcp->mc_fsbase = pcb->pcb_fsbase; mcp->mc_gsbase = pcb->pcb_gsbase; mcp->mc_xfpustate = 0; mcp->mc_xfpustate_len = 0; bzero(mcp->mc_spare, sizeof(mcp->mc_spare)); return (0); } /* * Set machine context. * * However, we don't set any but the user modifiable flags, and we won't * touch the cs selector. */ int set_mcontext(struct thread *td, mcontext_t *mcp) { struct pcb *pcb; struct trapframe *tp; char *xfpustate; long rflags; int ret; pcb = td->td_pcb; tp = td->td_frame; if (mcp->mc_len != sizeof(*mcp) || (mcp->mc_flags & ~_MC_FLAG_MASK) != 0) return (EINVAL); rflags = (mcp->mc_rflags & PSL_USERCHANGE) | (tp->tf_rflags & ~PSL_USERCHANGE); if (mcp->mc_flags & _MC_HASFPXSTATE) { if (mcp->mc_xfpustate_len > cpu_max_ext_state_size - sizeof(struct savefpu)) return (EINVAL); xfpustate = __builtin_alloca(mcp->mc_xfpustate_len); ret = copyin((void *)mcp->mc_xfpustate, xfpustate, mcp->mc_xfpustate_len); if (ret != 0) return (ret); } else xfpustate = NULL; ret = set_fpcontext(td, mcp, xfpustate, mcp->mc_xfpustate_len); if (ret != 0) return (ret); tp->tf_r15 = mcp->mc_r15; tp->tf_r14 = mcp->mc_r14; tp->tf_r13 = mcp->mc_r13; tp->tf_r12 = mcp->mc_r12; tp->tf_r11 = mcp->mc_r11; tp->tf_r10 = mcp->mc_r10; tp->tf_r9 = mcp->mc_r9; tp->tf_r8 = mcp->mc_r8; tp->tf_rdi = mcp->mc_rdi; tp->tf_rsi = mcp->mc_rsi; tp->tf_rbp = mcp->mc_rbp; tp->tf_rbx = mcp->mc_rbx; tp->tf_rdx = mcp->mc_rdx; tp->tf_rcx = mcp->mc_rcx; tp->tf_rax = mcp->mc_rax; tp->tf_rip = mcp->mc_rip; tp->tf_rflags = rflags; tp->tf_rsp = mcp->mc_rsp; tp->tf_ss = mcp->mc_ss; tp->tf_flags = mcp->mc_flags; if (tp->tf_flags & TF_HASSEGS) { tp->tf_ds = mcp->mc_ds; tp->tf_es = mcp->mc_es; tp->tf_fs = mcp->mc_fs; tp->tf_gs = mcp->mc_gs; } if (mcp->mc_flags & _MC_HASBASES) { pcb->pcb_fsbase = mcp->mc_fsbase; pcb->pcb_gsbase = mcp->mc_gsbase; } set_pcb_flags(pcb, PCB_FULL_IRET); return (0); } static void get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave, size_t xfpusave_len) { size_t max_len, len; mcp->mc_ownedfp = fpugetregs(td); bcopy(get_pcb_user_save_td(td), &mcp->mc_fpstate[0], sizeof(mcp->mc_fpstate)); mcp->mc_fpformat = fpuformat(); if (!use_xsave || xfpusave_len == 0) return; max_len = cpu_max_ext_state_size - sizeof(struct savefpu); len = xfpusave_len; if (len > max_len) { len = max_len; bzero(xfpusave + max_len, len - max_len); } mcp->mc_flags |= _MC_HASFPXSTATE; mcp->mc_xfpustate_len = len; bcopy(get_pcb_user_save_td(td) + 1, xfpusave, len); } static int set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate, size_t xfpustate_len) { int error; if (mcp->mc_fpformat == _MC_FPFMT_NODEV) return (0); else if (mcp->mc_fpformat != _MC_FPFMT_XMM) return (EINVAL); else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) { /* We don't care what state is left in the FPU or PCB. */ fpstate_drop(td); error = 0; } else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || mcp->mc_ownedfp == _MC_FPOWNED_PCB) { error = fpusetregs(td, (struct savefpu *)&mcp->mc_fpstate, xfpustate, xfpustate_len); } else return (EINVAL); return (error); } void fpstate_drop(struct thread *td) { KASSERT(PCB_USER_FPU(td->td_pcb), ("fpstate_drop: kernel-owned fpu")); critical_enter(); if (PCPU_GET(fpcurthread) == td) fpudrop(); /* * XXX force a full drop of the fpu. The above only drops it if we * owned it. * * XXX I don't much like fpugetuserregs()'s semantics of doing a full * drop. Dropping only to the pcb matches fnsave's behaviour. * We only need to drop to !PCB_INITDONE in sendsig(). But * sendsig() is the only caller of fpugetuserregs()... perhaps we just * have too many layers. */ clear_pcb_flags(curthread->td_pcb, PCB_FPUINITDONE | PCB_USERFPUINITDONE); critical_exit(); } int fill_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; if (td == NULL) { dbregs->dr[0] = rdr0(); dbregs->dr[1] = rdr1(); dbregs->dr[2] = rdr2(); dbregs->dr[3] = rdr3(); dbregs->dr[6] = rdr6(); dbregs->dr[7] = rdr7(); } else { pcb = td->td_pcb; dbregs->dr[0] = pcb->pcb_dr0; dbregs->dr[1] = pcb->pcb_dr1; dbregs->dr[2] = pcb->pcb_dr2; dbregs->dr[3] = pcb->pcb_dr3; dbregs->dr[6] = pcb->pcb_dr6; dbregs->dr[7] = pcb->pcb_dr7; } dbregs->dr[4] = 0; dbregs->dr[5] = 0; dbregs->dr[8] = 0; dbregs->dr[9] = 0; dbregs->dr[10] = 0; dbregs->dr[11] = 0; dbregs->dr[12] = 0; dbregs->dr[13] = 0; dbregs->dr[14] = 0; dbregs->dr[15] = 0; return (0); } int set_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; int i; if (td == NULL) { load_dr0(dbregs->dr[0]); load_dr1(dbregs->dr[1]); load_dr2(dbregs->dr[2]); load_dr3(dbregs->dr[3]); load_dr6(dbregs->dr[6]); load_dr7(dbregs->dr[7]); } else { /* * Don't let an illegal value for dr7 get set. Specifically, * check for undefined settings. Setting these bit patterns * result in undefined behaviour and can lead to an unexpected * TRCTRAP or a general protection fault right here. * Upper bits of dr6 and dr7 must not be set */ for (i = 0; i < 4; i++) { if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02) return (EINVAL); if (td->td_frame->tf_cs == _ucode32sel && DBREG_DR7_LEN(dbregs->dr[7], i) == DBREG_DR7_LEN_8) return (EINVAL); } if ((dbregs->dr[6] & 0xffffffff00000000ul) != 0 || (dbregs->dr[7] & 0xffffffff00000000ul) != 0) return (EINVAL); pcb = td->td_pcb; /* * Don't let a process set a breakpoint that is not within the * process's address space. If a process could do this, it * could halt the system by setting a breakpoint in the kernel * (if ddb was enabled). Thus, we need to check to make sure * that no breakpoints are being enabled for addresses outside * process's address space. * * XXX - what about when the watched area of the user's * address space is written into from within the kernel * ... wouldn't that still cause a breakpoint to be generated * from within kernel mode? */ if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) { /* dr0 is enabled */ if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) { /* dr1 is enabled */ if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) { /* dr2 is enabled */ if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) { /* dr3 is enabled */ if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) return (EINVAL); } pcb->pcb_dr0 = dbregs->dr[0]; pcb->pcb_dr1 = dbregs->dr[1]; pcb->pcb_dr2 = dbregs->dr[2]; pcb->pcb_dr3 = dbregs->dr[3]; pcb->pcb_dr6 = dbregs->dr[6]; pcb->pcb_dr7 = dbregs->dr[7]; set_pcb_flags(pcb, PCB_DBREGS); } return (0); } void reset_dbregs(void) { load_dr7(0); /* Turn off the control bits first */ load_dr0(0); load_dr1(0); load_dr2(0); load_dr3(0); load_dr6(0); } /* * Return > 0 if a hardware breakpoint has been hit, and the * breakpoint was in user space. Return 0, otherwise. */ int user_dbreg_trap(void) { u_int64_t dr7, dr6; /* debug registers dr6 and dr7 */ u_int64_t bp; /* breakpoint bits extracted from dr6 */ int nbp; /* number of breakpoints that triggered */ caddr_t addr[4]; /* breakpoint addresses */ int i; dr7 = rdr7(); if ((dr7 & 0x000000ff) == 0) { /* * all GE and LE bits in the dr7 register are zero, * thus the trap couldn't have been caused by the * hardware debug registers */ return 0; } nbp = 0; dr6 = rdr6(); bp = dr6 & 0x0000000f; if (!bp) { /* * None of the breakpoint bits are set meaning this * trap was not caused by any of the debug registers */ return 0; } /* * at least one of the breakpoints were hit, check to see * which ones and if any of them are user space addresses */ if (bp & 0x01) { addr[nbp++] = (caddr_t)rdr0(); } if (bp & 0x02) { addr[nbp++] = (caddr_t)rdr1(); } if (bp & 0x04) { addr[nbp++] = (caddr_t)rdr2(); } if (bp & 0x08) { addr[nbp++] = (caddr_t)rdr3(); } for (i = 0; i < nbp; i++) { if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) { /* * addr[i] is in user space */ return nbp; } } /* * None of the breakpoints are in user space. */ return 0; } #ifdef KDB /* * Provide inb() and outb() as functions. They are normally only available as * inline functions, thus cannot be called from the debugger. */ /* silence compiler warnings */ u_char inb_(u_short); void outb_(u_short, u_char); u_char inb_(u_short port) { return inb(port); } void outb_(u_short port, u_char data) { outb(port, data); } #endif /* KDB */ Index: stable/10/sys/amd64/amd64/mp_machdep.c =================================================================== --- stable/10/sys/amd64/amd64/mp_machdep.c (revision 333369) +++ stable/10/sys/amd64/amd64/mp_machdep.c (revision 333370) @@ -1,1748 +1,1759 @@ /*- * Copyright (c) 1996, by Steve Passe * Copyright (c) 2003, by Peter Wemm * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the developer may NOT be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_kstack_pages.h" #include "opt_sched.h" #include "opt_smp.h" #include #include #include #include #ifdef GPROF #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define WARMBOOT_TARGET 0 #define WARMBOOT_OFF (KERNBASE + 0x0467) #define WARMBOOT_SEG (KERNBASE + 0x0469) #define CMOS_REG (0x70) #define CMOS_DATA (0x71) #define BIOS_RESET (0x0f) #define BIOS_WARM (0x0a) /* lock region used by kernel profiling */ int mcount_lock; int mp_naps; /* # of Applications processors */ int boot_cpu_id = -1; /* designated BSP */ extern struct pcpu __pcpu[]; /* AP uses this during bootstrap. Do not staticize. */ char *bootSTK; static int bootAP; /* Free these after use */ void *bootstacks[MAXCPU]; /* Temporary variables for init_secondary() */ char *doublefault_stack; char *nmi_stack; +char *dbg_stack; void *dpcpu; struct pcb stoppcbs[MAXCPU]; struct susppcb **susppcbs; /* Variables needed for SMP tlb shootdown. */ vm_offset_t smp_tlb_addr2; struct invpcid_descr smp_tlb_invpcid; volatile int smp_tlb_wait; uint64_t pcid_cr3; pmap_t smp_tlb_pmap; extern int invpcid_works; #ifdef COUNT_IPIS /* Interrupt counts. */ static u_long *ipi_preempt_counts[MAXCPU]; static u_long *ipi_ast_counts[MAXCPU]; u_long *ipi_invltlb_counts[MAXCPU]; u_long *ipi_invlrng_counts[MAXCPU]; u_long *ipi_invlpg_counts[MAXCPU]; u_long *ipi_invlcache_counts[MAXCPU]; u_long *ipi_rendezvous_counts[MAXCPU]; static u_long *ipi_hardclock_counts[MAXCPU]; #endif /* Default cpu_ops implementation. */ struct cpu_ops cpu_ops = { .ipi_vectored = lapic_ipi_vectored }; extern inthand_t IDTVEC(fast_syscall), IDTVEC(fast_syscall32); extern int pmap_pcid_enabled; /* * Local data and functions. */ static volatile cpuset_t ipi_nmi_pending; volatile cpuset_t resuming_cpus; volatile cpuset_t toresume_cpus; /* used to hold the AP's until we are ready to release them */ static struct mtx ap_boot_mtx; /* Set to 1 once we're ready to let the APs out of the pen. */ static volatile int aps_ready = 0; /* * Store data from cpu_add() until later in the boot when we actually setup * the APs. */ struct cpu_info { int cpu_present:1; int cpu_bsp:1; int cpu_disabled:1; int cpu_hyperthread:1; } static cpu_info[MAX_APIC_ID + 1]; int cpu_apic_ids[MAXCPU]; int apic_cpuids[MAX_APIC_ID + 1]; /* Holds pending bitmap based IPIs per CPU */ volatile u_int cpu_ipi_pending[MAXCPU]; static u_int boot_address; static int cpu_logical; /* logical cpus per core */ static int cpu_cores; /* cores per package */ static void assign_cpu_ids(void); static void set_interrupt_apic_ids(void); static int start_all_aps(void); static int start_ap(int apic_id); static void release_aps(void *dummy); static u_int hyperthreading_cpus; /* logical cpus sharing L1 cache */ static int hyperthreading_allowed = 1; static u_int bootMP_size; static void mem_range_AP_init(void) { if (mem_range_softc.mr_op && mem_range_softc.mr_op->initAP) mem_range_softc.mr_op->initAP(&mem_range_softc); } static void topo_probe_amd(void) { int core_id_bits; int id; /* AMD processors do not support HTT. */ cpu_logical = 1; if ((amd_feature2 & AMDID2_CMP) == 0) { cpu_cores = 1; return; } core_id_bits = (cpu_procinfo2 & AMDID_COREID_SIZE) >> AMDID_COREID_SIZE_SHIFT; if (core_id_bits == 0) { cpu_cores = (cpu_procinfo2 & AMDID_CMP_CORES) + 1; return; } /* Fam 10h and newer should get here. */ for (id = 0; id <= MAX_APIC_ID; id++) { /* Check logical CPU availability. */ if (!cpu_info[id].cpu_present || cpu_info[id].cpu_disabled) continue; /* Check if logical CPU has the same package ID. */ if ((id >> core_id_bits) != (boot_cpu_id >> core_id_bits)) continue; cpu_cores++; } } /* * Round up to the next power of two, if necessary, and then * take log2. * Returns -1 if argument is zero. */ static __inline int mask_width(u_int x) { return (fls(x << (1 - powerof2(x))) - 1); } static void topo_probe_0x4(void) { u_int p[4]; int pkg_id_bits; int core_id_bits; int max_cores; int max_logical; int id; /* Both zero and one here mean one logical processor per package. */ max_logical = (cpu_feature & CPUID_HTT) != 0 ? (cpu_procinfo & CPUID_HTT_CORES) >> 16 : 1; if (max_logical <= 1) return; /* * Because of uniformity assumption we examine only * those logical processors that belong to the same * package as BSP. Further, we count number of * logical processors that belong to the same core * as BSP thus deducing number of threads per core. */ if (cpu_high >= 0x4) { cpuid_count(0x04, 0, p); max_cores = ((p[0] >> 26) & 0x3f) + 1; } else max_cores = 1; core_id_bits = mask_width(max_logical/max_cores); if (core_id_bits < 0) return; pkg_id_bits = core_id_bits + mask_width(max_cores); for (id = 0; id <= MAX_APIC_ID; id++) { /* Check logical CPU availability. */ if (!cpu_info[id].cpu_present || cpu_info[id].cpu_disabled) continue; /* Check if logical CPU has the same package ID. */ if ((id >> pkg_id_bits) != (boot_cpu_id >> pkg_id_bits)) continue; cpu_cores++; /* Check if logical CPU has the same package and core IDs. */ if ((id >> core_id_bits) == (boot_cpu_id >> core_id_bits)) cpu_logical++; } KASSERT(cpu_cores >= 1 && cpu_logical >= 1, ("topo_probe_0x4 couldn't find BSP")); cpu_cores /= cpu_logical; hyperthreading_cpus = cpu_logical; } static void topo_probe_0xb(void) { u_int p[4]; int bits; int cnt; int i; int logical; int type; int x; /* We only support three levels for now. */ for (i = 0; i < 3; i++) { cpuid_count(0x0b, i, p); /* Fall back if CPU leaf 11 doesn't really exist. */ if (i == 0 && p[1] == 0) { topo_probe_0x4(); return; } bits = p[0] & 0x1f; logical = p[1] &= 0xffff; type = (p[2] >> 8) & 0xff; if (type == 0 || logical == 0) break; /* * Because of uniformity assumption we examine only * those logical processors that belong to the same * package as BSP. */ for (cnt = 0, x = 0; x <= MAX_APIC_ID; x++) { if (!cpu_info[x].cpu_present || cpu_info[x].cpu_disabled) continue; if (x >> bits == boot_cpu_id >> bits) cnt++; } if (type == CPUID_TYPE_SMT) cpu_logical = cnt; else if (type == CPUID_TYPE_CORE) cpu_cores = cnt; } if (cpu_logical == 0) cpu_logical = 1; cpu_cores /= cpu_logical; } /* * Both topology discovery code and code that consumes topology * information assume top-down uniformity of the topology. * That is, all physical packages must be identical and each * core in a package must have the same number of threads. * Topology information is queried only on BSP, on which this * code runs and for which it can query CPUID information. * Then topology is extrapolated on all packages using the * uniformity assumption. */ static void topo_probe(void) { static int cpu_topo_probed = 0; if (cpu_topo_probed) return; CPU_ZERO(&logical_cpus_mask); if (mp_ncpus <= 1) cpu_cores = cpu_logical = 1; else if (cpu_vendor_id == CPU_VENDOR_AMD) topo_probe_amd(); else if (cpu_vendor_id == CPU_VENDOR_INTEL) { /* * See Intel(R) 64 Architecture Processor * Topology Enumeration article for details. * * Note that 0x1 <= cpu_high < 4 case should be * compatible with topo_probe_0x4() logic when * CPUID.1:EBX[23:16] > 0 (cpu_cores will be 1) * or it should trigger the fallback otherwise. */ if (cpu_high >= 0xb) topo_probe_0xb(); else if (cpu_high >= 0x1) topo_probe_0x4(); } /* * Fallback: assume each logical CPU is in separate * physical package. That is, no multi-core, no SMT. */ if (cpu_cores == 0 || cpu_logical == 0) cpu_cores = cpu_logical = 1; cpu_topo_probed = 1; } struct cpu_group * cpu_topo(void) { int cg_flags; /* * Determine whether any threading flags are * necessry. */ topo_probe(); if (cpu_logical > 1 && hyperthreading_cpus) cg_flags = CG_FLAG_HTT; else if (cpu_logical > 1) cg_flags = CG_FLAG_SMT; else cg_flags = 0; if (mp_ncpus % (cpu_cores * cpu_logical) != 0) { printf("WARNING: Non-uniform processors.\n"); printf("WARNING: Using suboptimal topology.\n"); return (smp_topo_none()); } /* * No multi-core or hyper-threaded. */ if (cpu_logical * cpu_cores == 1) return (smp_topo_none()); /* * Only HTT no multi-core. */ if (cpu_logical > 1 && cpu_cores == 1) return (smp_topo_1level(CG_SHARE_L1, cpu_logical, cg_flags)); /* * Only multi-core no HTT. */ if (cpu_cores > 1 && cpu_logical == 1) return (smp_topo_1level(CG_SHARE_L2, cpu_cores, cg_flags)); /* * Both HTT and multi-core. */ return (smp_topo_2level(CG_SHARE_L2, cpu_cores, CG_SHARE_L1, cpu_logical, cg_flags)); } /* * Calculate usable address in base memory for AP trampoline code. */ u_int mp_bootaddress(u_int basemem) { bootMP_size = mptramp_end - mptramp_start; boot_address = trunc_page(basemem * 1024); /* round down to 4k boundary */ if (((basemem * 1024) - boot_address) < bootMP_size) boot_address -= PAGE_SIZE; /* not enough, lower by 4k */ /* 3 levels of page table pages */ mptramp_pagetables = boot_address - (PAGE_SIZE * 3); return mptramp_pagetables; } void cpu_add(u_int apic_id, char boot_cpu) { if (apic_id > MAX_APIC_ID) { panic("SMP: APIC ID %d too high", apic_id); return; } KASSERT(cpu_info[apic_id].cpu_present == 0, ("CPU %d added twice", apic_id)); cpu_info[apic_id].cpu_present = 1; if (boot_cpu) { KASSERT(boot_cpu_id == -1, ("CPU %d claims to be BSP, but CPU %d already is", apic_id, boot_cpu_id)); boot_cpu_id = apic_id; cpu_info[apic_id].cpu_bsp = 1; } if (mp_ncpus < MAXCPU) { mp_ncpus++; mp_maxid = mp_ncpus - 1; } if (bootverbose) printf("SMP: Added CPU %d (%s)\n", apic_id, boot_cpu ? "BSP" : "AP"); } void cpu_mp_setmaxid(void) { /* * mp_maxid should be already set by calls to cpu_add(). * Just sanity check its value here. */ if (mp_ncpus == 0) KASSERT(mp_maxid == 0, ("%s: mp_ncpus is zero, but mp_maxid is not", __func__)); else if (mp_ncpus == 1) mp_maxid = 0; else KASSERT(mp_maxid >= mp_ncpus - 1, ("%s: counters out of sync: max %d, count %d", __func__, mp_maxid, mp_ncpus)); } int cpu_mp_probe(void) { /* * Always record BSP in CPU map so that the mbuf init code works * correctly. */ CPU_SETOF(0, &all_cpus); if (mp_ncpus == 0) { /* * No CPUs were found, so this must be a UP system. Setup * the variables to represent a system with a single CPU * with an id of 0. */ mp_ncpus = 1; return (0); } /* At least one CPU was found. */ if (mp_ncpus == 1) { /* * One CPU was found, so this must be a UP system with * an I/O APIC. */ mp_maxid = 0; return (0); } /* At least two CPUs were found. */ return (1); } /* * Initialize the IPI handlers and start up the AP's. */ void cpu_mp_start(void) { int i; /* Initialize the logical ID to APIC ID table. */ for (i = 0; i < MAXCPU; i++) { cpu_apic_ids[i] = -1; cpu_ipi_pending[i] = 0; } /* Install an inter-CPU IPI for TLB invalidation */ if (pmap_pcid_enabled) { setidt(IPI_INVLTLB, IDTVEC(invltlb_pcid), SDT_SYSIGT, SEL_KPL, 0); setidt(IPI_INVLPG, IDTVEC(invlpg_pcid), SDT_SYSIGT, SEL_KPL, 0); } else { setidt(IPI_INVLTLB, IDTVEC(invltlb), SDT_SYSIGT, SEL_KPL, 0); setidt(IPI_INVLPG, IDTVEC(invlpg), SDT_SYSIGT, SEL_KPL, 0); } setidt(IPI_INVLRNG, IDTVEC(invlrng), SDT_SYSIGT, SEL_KPL, 0); /* Install an inter-CPU IPI for cache invalidation. */ setidt(IPI_INVLCACHE, IDTVEC(invlcache), SDT_SYSIGT, SEL_KPL, 0); /* Install an inter-CPU IPI for all-CPU rendezvous */ setidt(IPI_RENDEZVOUS, IDTVEC(rendezvous), SDT_SYSIGT, SEL_KPL, 0); /* Install generic inter-CPU IPI handler */ setidt(IPI_BITMAP_VECTOR, IDTVEC(ipi_intr_bitmap_handler), SDT_SYSIGT, SEL_KPL, 0); /* Install an inter-CPU IPI for CPU stop/restart */ setidt(IPI_STOP, IDTVEC(cpustop), SDT_SYSIGT, SEL_KPL, 0); /* Install an inter-CPU IPI for CPU suspend/resume */ setidt(IPI_SUSPEND, IDTVEC(cpususpend), SDT_SYSIGT, SEL_KPL, 0); /* Set boot_cpu_id if needed. */ if (boot_cpu_id == -1) { boot_cpu_id = PCPU_GET(apic_id); cpu_info[boot_cpu_id].cpu_bsp = 1; } else KASSERT(boot_cpu_id == PCPU_GET(apic_id), ("BSP's APIC ID doesn't match boot_cpu_id")); /* Probe logical/physical core configuration. */ topo_probe(); assign_cpu_ids(); /* Start each Application Processor */ start_all_aps(); set_interrupt_apic_ids(); } /* * Print various information about the SMP system hardware and setup. */ void cpu_mp_announce(void) { const char *hyperthread; int i; printf("FreeBSD/SMP: %d package(s) x %d core(s)", mp_ncpus / (cpu_cores * cpu_logical), cpu_cores); if (hyperthreading_cpus > 1) printf(" x %d HTT threads", cpu_logical); else if (cpu_logical > 1) printf(" x %d SMT threads", cpu_logical); printf("\n"); /* List active CPUs first. */ printf(" cpu0 (BSP): APIC ID: %2d\n", boot_cpu_id); for (i = 1; i < mp_ncpus; i++) { if (cpu_info[cpu_apic_ids[i]].cpu_hyperthread) hyperthread = "/HT"; else hyperthread = ""; printf(" cpu%d (AP%s): APIC ID: %2d\n", i, hyperthread, cpu_apic_ids[i]); } /* List disabled CPUs last. */ for (i = 0; i <= MAX_APIC_ID; i++) { if (!cpu_info[i].cpu_present || !cpu_info[i].cpu_disabled) continue; if (cpu_info[i].cpu_hyperthread) hyperthread = "/HT"; else hyperthread = ""; printf(" cpu (AP%s): APIC ID: %2d (disabled)\n", hyperthread, i); } } /* * AP CPU's call this to initialize themselves. */ void init_secondary(void) { struct pcpu *pc; struct nmi_pcpu *np; u_int64_t msr, cr0; u_int cpuid; int cpu, gsel_tss, x; struct region_descriptor ap_gdt; /* Set by the startup code for us to use */ cpu = bootAP; /* Init tss */ common_tss[cpu] = common_tss[0]; common_tss[cpu].tss_rsp0 = 0; /* not used until after switch */ common_tss[cpu].tss_iobase = sizeof(struct amd64tss) + IOPAGES * PAGE_SIZE; common_tss[cpu].tss_ist1 = (long)&doublefault_stack[PAGE_SIZE]; /* The NMI stack runs on IST2. */ np = ((struct nmi_pcpu *) &nmi_stack[PAGE_SIZE]) - 1; common_tss[cpu].tss_ist2 = (long) np; + /* The DB# stack runs on IST4. */ + np = ((struct nmi_pcpu *) &dbg_stack[PAGE_SIZE]) - 1; + common_tss[cpu].tss_ist4 = (long) np; + /* Prepare private GDT */ gdt_segs[GPROC0_SEL].ssd_base = (long) &common_tss[cpu]; for (x = 0; x < NGDT; x++) { if (x != GPROC0_SEL && x != (GPROC0_SEL + 1) && x != GUSERLDT_SEL && x != (GUSERLDT_SEL + 1)) ssdtosd(&gdt_segs[x], &gdt[NGDT * cpu + x]); } ssdtosyssd(&gdt_segs[GPROC0_SEL], (struct system_segment_descriptor *)&gdt[NGDT * cpu + GPROC0_SEL]); ap_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; ap_gdt.rd_base = (long) &gdt[NGDT * cpu]; lgdt(&ap_gdt); /* does magic intra-segment return */ /* Get per-cpu data */ pc = &__pcpu[cpu]; /* prime data page for it to use */ pcpu_init(pc, cpu, sizeof(struct pcpu)); dpcpu_init(dpcpu, cpu); pc->pc_apic_id = cpu_apic_ids[cpu]; pc->pc_prvspace = pc; pc->pc_curthread = 0; pc->pc_tssp = &common_tss[cpu]; pc->pc_commontssp = &common_tss[cpu]; pc->pc_rsp0 = 0; pc->pc_tss = (struct system_segment_descriptor *)&gdt[NGDT * cpu + GPROC0_SEL]; pc->pc_fs32p = &gdt[NGDT * cpu + GUFS32_SEL]; pc->pc_gs32p = &gdt[NGDT * cpu + GUGS32_SEL]; pc->pc_ldt = (struct system_segment_descriptor *)&gdt[NGDT * cpu + GUSERLDT_SEL]; /* Save the per-cpu pointer for use by the NMI handler. */ np->np_pcpu = (register_t) pc; + /* Save the per-cpu pointer for use by the DB# handler. */ + np = ((struct nmi_pcpu *) &dbg_stack[PAGE_SIZE]) - 1; + np->np_pcpu = (register_t) pc; + wrmsr(MSR_FSBASE, 0); /* User value */ wrmsr(MSR_GSBASE, (u_int64_t)pc); wrmsr(MSR_KGSBASE, (u_int64_t)pc); /* XXX User value while we're in the kernel */ fix_cpuid(); lidt(&r_idt); gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); ltr(gsel_tss); /* * Set to a known state: * Set by mpboot.s: CR0_PG, CR0_PE * Set by cpu_setregs: CR0_NE, CR0_MP, CR0_TS, CR0_WP, CR0_AM */ cr0 = rcr0(); cr0 &= ~(CR0_CD | CR0_NW | CR0_EM); load_cr0(cr0); /* Set up the fast syscall stuff */ msr = rdmsr(MSR_EFER) | EFER_SCE; wrmsr(MSR_EFER, msr); wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall)); wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32)); msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) | ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48); wrmsr(MSR_STAR, msr); wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D); /* Disable local APIC just to be sure. */ lapic_disable(); /* signal our startup to the BSP. */ mp_naps++; /* Spin until the BSP releases the AP's. */ while (!aps_ready) ia32_pause(); /* Initialize the PAT MSR. */ pmap_init_pat(); /* set up CPU registers and state */ cpu_setregs(); /* set up SSE/NX */ initializecpu(); /* set up FPU state on the AP */ fpuinit(); if (cpu_ops.cpu_init) cpu_ops.cpu_init(); /* A quick check from sanity claus */ cpuid = PCPU_GET(cpuid); if (PCPU_GET(apic_id) != lapic_id()) { printf("SMP: cpuid = %d\n", cpuid); printf("SMP: actual apic_id = %d\n", lapic_id()); printf("SMP: correct apic_id = %d\n", PCPU_GET(apic_id)); panic("cpuid mismatch! boom!!"); } /* Initialize curthread. */ KASSERT(PCPU_GET(idlethread) != NULL, ("no idle thread")); PCPU_SET(curthread, PCPU_GET(idlethread)); mca_init(); mtx_lock_spin(&ap_boot_mtx); /* Init local apic for irq's */ lapic_setup(1); /* Set memory range attributes for this CPU to match the BSP */ mem_range_AP_init(); smp_cpus++; CTR1(KTR_SMP, "SMP: AP CPU #%d Launched", cpuid); printf("SMP: AP CPU #%d Launched!\n", cpuid); /* Determine if we are a logical CPU. */ /* XXX Calculation depends on cpu_logical being a power of 2, e.g. 2 */ if (cpu_logical > 1 && PCPU_GET(apic_id) % cpu_logical != 0) CPU_SET(cpuid, &logical_cpus_mask); if (bootverbose) lapic_dump("AP"); if (smp_cpus == mp_ncpus) { /* enable IPI's, tlb shootdown, freezes etc */ atomic_store_rel_int(&smp_started, 1); } /* * Enable global pages TLB extension * This also implicitly flushes the TLB */ load_cr4(rcr4() | CR4_PGE); if (pmap_pcid_enabled) load_cr4(rcr4() | CR4_PCIDE); load_ds(_udatasel); load_es(_udatasel); load_fs(_ufssel); mtx_unlock_spin(&ap_boot_mtx); /* Wait until all the AP's are up. */ while (smp_started == 0) ia32_pause(); /* Start per-CPU event timers. */ cpu_initclocks_ap(); sched_throw(NULL); panic("scheduler returned us to %s", __func__); /* NOTREACHED */ } /******************************************************************* * local functions and data */ /* * We tell the I/O APIC code about all the CPUs we want to receive * interrupts. If we don't want certain CPUs to receive IRQs we * can simply not tell the I/O APIC code about them in this function. * We also do not tell it about the BSP since it tells itself about * the BSP internally to work with UP kernels and on UP machines. */ static void set_interrupt_apic_ids(void) { u_int i, apic_id; for (i = 0; i < MAXCPU; i++) { apic_id = cpu_apic_ids[i]; if (apic_id == -1) continue; if (cpu_info[apic_id].cpu_bsp) continue; if (cpu_info[apic_id].cpu_disabled) continue; /* Don't let hyperthreads service interrupts. */ if (hyperthreading_cpus > 1 && apic_id % hyperthreading_cpus != 0) continue; intr_add_cpu(i); } } /* * Assign logical CPU IDs to local APICs. */ static void assign_cpu_ids(void) { u_int i; TUNABLE_INT_FETCH("machdep.hyperthreading_allowed", &hyperthreading_allowed); /* Check for explicitly disabled CPUs. */ for (i = 0; i <= MAX_APIC_ID; i++) { if (!cpu_info[i].cpu_present || cpu_info[i].cpu_bsp) continue; if (hyperthreading_cpus > 1 && i % hyperthreading_cpus != 0) { cpu_info[i].cpu_hyperthread = 1; /* * Don't use HT CPU if it has been disabled by a * tunable. */ if (hyperthreading_allowed == 0) { cpu_info[i].cpu_disabled = 1; continue; } } /* Don't use this CPU if it has been disabled by a tunable. */ if (resource_disabled("lapic", i)) { cpu_info[i].cpu_disabled = 1; continue; } } if (hyperthreading_allowed == 0 && hyperthreading_cpus > 1) { hyperthreading_cpus = 0; cpu_logical = 1; } /* * Assign CPU IDs to local APIC IDs and disable any CPUs * beyond MAXCPU. CPU 0 is always assigned to the BSP. * * To minimize confusion for userland, we attempt to number * CPUs such that all threads and cores in a package are * grouped together. For now we assume that the BSP is always * the first thread in a package and just start adding APs * starting with the BSP's APIC ID. */ mp_ncpus = 1; cpu_apic_ids[0] = boot_cpu_id; apic_cpuids[boot_cpu_id] = 0; for (i = boot_cpu_id + 1; i != boot_cpu_id; i == MAX_APIC_ID ? i = 0 : i++) { if (!cpu_info[i].cpu_present || cpu_info[i].cpu_bsp || cpu_info[i].cpu_disabled) continue; if (mp_ncpus < MAXCPU) { cpu_apic_ids[mp_ncpus] = i; apic_cpuids[i] = mp_ncpus; mp_ncpus++; } else cpu_info[i].cpu_disabled = 1; } KASSERT(mp_maxid >= mp_ncpus - 1, ("%s: counters out of sync: max %d, count %d", __func__, mp_maxid, mp_ncpus)); } /* * start each AP in our list */ static int start_all_aps(void) { vm_offset_t va = boot_address + KERNBASE; u_int64_t *pt4, *pt3, *pt2; u_int32_t mpbioswarmvec; int apic_id, cpu, i; u_char mpbiosreason; mtx_init(&ap_boot_mtx, "ap boot", NULL, MTX_SPIN); /* install the AP 1st level boot code */ pmap_kenter(va, boot_address); pmap_invalidate_page(kernel_pmap, va); bcopy(mptramp_start, (void *)va, bootMP_size); /* Locate the page tables, they'll be below the trampoline */ pt4 = (u_int64_t *)(uintptr_t)(mptramp_pagetables + KERNBASE); pt3 = pt4 + (PAGE_SIZE) / sizeof(u_int64_t); pt2 = pt3 + (PAGE_SIZE) / sizeof(u_int64_t); /* Create the initial 1GB replicated page tables */ for (i = 0; i < 512; i++) { /* Each slot of the level 4 pages points to the same level 3 page */ pt4[i] = (u_int64_t)(uintptr_t)(mptramp_pagetables + PAGE_SIZE); pt4[i] |= PG_V | PG_RW | PG_U; /* Each slot of the level 3 pages points to the same level 2 page */ pt3[i] = (u_int64_t)(uintptr_t)(mptramp_pagetables + (2 * PAGE_SIZE)); pt3[i] |= PG_V | PG_RW | PG_U; /* The level 2 page slots are mapped with 2MB pages for 1GB. */ pt2[i] = i * (2 * 1024 * 1024); pt2[i] |= PG_V | PG_RW | PG_PS | PG_U; } /* save the current value of the warm-start vector */ mpbioswarmvec = *((u_int32_t *) WARMBOOT_OFF); outb(CMOS_REG, BIOS_RESET); mpbiosreason = inb(CMOS_DATA); /* setup a vector to our boot code */ *((volatile u_short *) WARMBOOT_OFF) = WARMBOOT_TARGET; *((volatile u_short *) WARMBOOT_SEG) = (boot_address >> 4); outb(CMOS_REG, BIOS_RESET); outb(CMOS_DATA, BIOS_WARM); /* 'warm-start' */ /* start each AP */ for (cpu = 1; cpu < mp_ncpus; cpu++) { apic_id = cpu_apic_ids[cpu]; /* allocate and set up an idle stack data page */ bootstacks[cpu] = (void *)kmem_malloc(kernel_arena, KSTACK_PAGES * PAGE_SIZE, M_WAITOK | M_ZERO); doublefault_stack = (char *)kmem_malloc(kernel_arena, PAGE_SIZE, M_WAITOK | M_ZERO); nmi_stack = (char *)kmem_malloc(kernel_arena, PAGE_SIZE, + M_WAITOK | M_ZERO); + dbg_stack = (char *)kmem_malloc(kernel_arena, PAGE_SIZE, M_WAITOK | M_ZERO); dpcpu = (void *)kmem_malloc(kernel_arena, DPCPU_SIZE, M_WAITOK | M_ZERO); bootSTK = (char *)bootstacks[cpu] + KSTACK_PAGES * PAGE_SIZE - 8; bootAP = cpu; /* attempt to start the Application Processor */ if (!start_ap(apic_id)) { /* restore the warmstart vector */ *(u_int32_t *) WARMBOOT_OFF = mpbioswarmvec; panic("AP #%d (PHY# %d) failed!", cpu, apic_id); } CPU_SET(cpu, &all_cpus); /* record AP in CPU map */ } /* restore the warmstart vector */ *(u_int32_t *) WARMBOOT_OFF = mpbioswarmvec; outb(CMOS_REG, BIOS_RESET); outb(CMOS_DATA, mpbiosreason); /* number of APs actually started */ return mp_naps; } /* * This function starts the AP (application processor) identified * by the APIC ID 'physicalCpu'. It does quite a "song and dance" * to accomplish this. This is necessary because of the nuances * of the different hardware we might encounter. It isn't pretty, * but it seems to work. */ static int start_ap(int apic_id) { int vector, ms; int cpus; /* calculate the vector */ vector = (boot_address >> 12) & 0xff; /* used as a watchpoint to signal AP startup */ cpus = mp_naps; ipi_startup(apic_id, vector); /* Wait up to 5 seconds for it to start. */ for (ms = 0; ms < 5000; ms++) { if (mp_naps > cpus) return 1; /* return SUCCESS */ DELAY(1000); } return 0; /* return FAILURE */ } #ifdef COUNT_XINVLTLB_HITS u_int xhits_gbl[MAXCPU]; u_int xhits_pg[MAXCPU]; u_int xhits_rng[MAXCPU]; static SYSCTL_NODE(_debug, OID_AUTO, xhits, CTLFLAG_RW, 0, ""); SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, global, CTLFLAG_RW, &xhits_gbl, sizeof(xhits_gbl), "IU", ""); SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, page, CTLFLAG_RW, &xhits_pg, sizeof(xhits_pg), "IU", ""); SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, range, CTLFLAG_RW, &xhits_rng, sizeof(xhits_rng), "IU", ""); u_int ipi_global; u_int ipi_page; u_int ipi_range; u_int ipi_range_size; SYSCTL_UINT(_debug_xhits, OID_AUTO, ipi_global, CTLFLAG_RW, &ipi_global, 0, ""); SYSCTL_UINT(_debug_xhits, OID_AUTO, ipi_page, CTLFLAG_RW, &ipi_page, 0, ""); SYSCTL_UINT(_debug_xhits, OID_AUTO, ipi_range, CTLFLAG_RW, &ipi_range, 0, ""); SYSCTL_UINT(_debug_xhits, OID_AUTO, ipi_range_size, CTLFLAG_RW, &ipi_range_size, 0, ""); u_int ipi_masked_global; u_int ipi_masked_page; u_int ipi_masked_range; u_int ipi_masked_range_size; SYSCTL_UINT(_debug_xhits, OID_AUTO, ipi_masked_global, CTLFLAG_RW, &ipi_masked_global, 0, ""); SYSCTL_UINT(_debug_xhits, OID_AUTO, ipi_masked_page, CTLFLAG_RW, &ipi_masked_page, 0, ""); SYSCTL_UINT(_debug_xhits, OID_AUTO, ipi_masked_range, CTLFLAG_RW, &ipi_masked_range, 0, ""); SYSCTL_UINT(_debug_xhits, OID_AUTO, ipi_masked_range_size, CTLFLAG_RW, &ipi_masked_range_size, 0, ""); #endif /* COUNT_XINVLTLB_HITS */ /* * Init and startup IPI. */ void ipi_startup(int apic_id, int vector) { /* * This attempts to follow the algorithm described in the * Intel Multiprocessor Specification v1.4 in section B.4. * For each IPI, we allow the local APIC ~20us to deliver the * IPI. If that times out, we panic. */ /* * first we do an INIT IPI: this INIT IPI might be run, resetting * and running the target CPU. OR this INIT IPI might be latched (P5 * bug), CPU waiting for STARTUP IPI. OR this INIT IPI might be * ignored. */ lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_LEVEL | APIC_LEVEL_ASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_INIT, apic_id); lapic_ipi_wait(100); /* Explicitly deassert the INIT IPI. */ lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_LEVEL | APIC_LEVEL_DEASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_INIT, apic_id); DELAY(10000); /* wait ~10mS */ /* * next we do a STARTUP IPI: the previous INIT IPI might still be * latched, (P5 bug) this 1st STARTUP would then terminate * immediately, and the previously started INIT IPI would continue. OR * the previous INIT IPI has already run. and this STARTUP IPI will * run. OR the previous INIT IPI was ignored. and this STARTUP IPI * will run. */ lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_EDGE | APIC_LEVEL_ASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_STARTUP | vector, apic_id); if (!lapic_ipi_wait(100)) panic("Failed to deliver first STARTUP IPI to APIC %d", apic_id); DELAY(200); /* wait ~200uS */ /* * finally we do a 2nd STARTUP IPI: this 2nd STARTUP IPI should run IF * the previous STARTUP IPI was cancelled by a latched INIT IPI. OR * this STARTUP IPI will be ignored, as only ONE STARTUP IPI is * recognized after hardware RESET or INIT IPI. */ lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_EDGE | APIC_LEVEL_ASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_STARTUP | vector, apic_id); if (!lapic_ipi_wait(100)) panic("Failed to deliver second STARTUP IPI to APIC %d", apic_id); DELAY(200); /* wait ~200uS */ } /* * Send an IPI to specified CPU handling the bitmap logic. */ static void ipi_send_cpu(int cpu, u_int ipi) { u_int bitmap, old_pending, new_pending; KASSERT(cpu_apic_ids[cpu] != -1, ("IPI to non-existent CPU %d", cpu)); if (IPI_IS_BITMAPED(ipi)) { bitmap = 1 << ipi; ipi = IPI_BITMAP_VECTOR; do { old_pending = cpu_ipi_pending[cpu]; new_pending = old_pending | bitmap; } while (!atomic_cmpset_int(&cpu_ipi_pending[cpu], old_pending, new_pending)); if (old_pending) return; } cpu_ops.ipi_vectored(ipi, cpu_apic_ids[cpu]); } /* * Flush the TLB on all other CPU's */ static void smp_tlb_shootdown(u_int vector, pmap_t pmap, vm_offset_t addr1, vm_offset_t addr2) { u_int ncpu; ncpu = mp_ncpus - 1; /* does not shootdown self */ if (ncpu < 1) return; /* no other cpus */ if (!(read_rflags() & PSL_I)) panic("%s: interrupts disabled", __func__); mtx_lock_spin(&smp_ipi_mtx); smp_tlb_invpcid.addr = addr1; if (pmap == NULL) { smp_tlb_invpcid.pcid = 0; } else { smp_tlb_invpcid.pcid = pmap->pm_pcid; pcid_cr3 = pmap->pm_cr3; } smp_tlb_addr2 = addr2; smp_tlb_pmap = pmap; atomic_store_rel_int(&smp_tlb_wait, 0); ipi_all_but_self(vector); while (smp_tlb_wait < ncpu) ia32_pause(); mtx_unlock_spin(&smp_ipi_mtx); } static void smp_targeted_tlb_shootdown(cpuset_t mask, u_int vector, pmap_t pmap, vm_offset_t addr1, vm_offset_t addr2) { int cpu, ncpu, othercpus; othercpus = mp_ncpus - 1; if (CPU_ISFULLSET(&mask)) { if (othercpus < 1) return; } else { CPU_CLR(PCPU_GET(cpuid), &mask); if (CPU_EMPTY(&mask)) return; } if (!(read_rflags() & PSL_I)) panic("%s: interrupts disabled", __func__); mtx_lock_spin(&smp_ipi_mtx); smp_tlb_invpcid.addr = addr1; if (pmap == NULL) { smp_tlb_invpcid.pcid = 0; } else { smp_tlb_invpcid.pcid = pmap->pm_pcid; pcid_cr3 = pmap->pm_cr3; } smp_tlb_addr2 = addr2; smp_tlb_pmap = pmap; atomic_store_rel_int(&smp_tlb_wait, 0); if (CPU_ISFULLSET(&mask)) { ncpu = othercpus; ipi_all_but_self(vector); } else { ncpu = 0; while ((cpu = CPU_FFS(&mask)) != 0) { cpu--; CPU_CLR(cpu, &mask); CTR3(KTR_SMP, "%s: cpu: %d ipi: %x", __func__, cpu, vector); ipi_send_cpu(cpu, vector); ncpu++; } } while (smp_tlb_wait < ncpu) ia32_pause(); mtx_unlock_spin(&smp_ipi_mtx); } void smp_cache_flush(void) { if (smp_started) smp_tlb_shootdown(IPI_INVLCACHE, NULL, 0, 0); } void smp_invltlb(pmap_t pmap) { if (smp_started) { smp_tlb_shootdown(IPI_INVLTLB, pmap, 0, 0); #ifdef COUNT_XINVLTLB_HITS ipi_global++; #endif } } void smp_invlpg(pmap_t pmap, vm_offset_t addr) { if (smp_started) { smp_tlb_shootdown(IPI_INVLPG, pmap, addr, 0); #ifdef COUNT_XINVLTLB_HITS ipi_page++; #endif } } void smp_invlpg_range(pmap_t pmap, vm_offset_t addr1, vm_offset_t addr2) { if (smp_started) { smp_tlb_shootdown(IPI_INVLRNG, pmap, addr1, addr2); #ifdef COUNT_XINVLTLB_HITS ipi_range++; ipi_range_size += (addr2 - addr1) / PAGE_SIZE; #endif } } void smp_masked_invltlb(cpuset_t mask, pmap_t pmap) { if (smp_started) { smp_targeted_tlb_shootdown(mask, IPI_INVLTLB, pmap, 0, 0); #ifdef COUNT_XINVLTLB_HITS ipi_masked_global++; #endif } } void smp_masked_invlpg(cpuset_t mask, pmap_t pmap, vm_offset_t addr) { if (smp_started) { smp_targeted_tlb_shootdown(mask, IPI_INVLPG, pmap, addr, 0); #ifdef COUNT_XINVLTLB_HITS ipi_masked_page++; #endif } } void smp_masked_invlpg_range(cpuset_t mask, pmap_t pmap, vm_offset_t addr1, vm_offset_t addr2) { if (smp_started) { smp_targeted_tlb_shootdown(mask, IPI_INVLRNG, pmap, addr1, addr2); #ifdef COUNT_XINVLTLB_HITS ipi_masked_range++; ipi_masked_range_size += (addr2 - addr1) / PAGE_SIZE; #endif } } void ipi_bitmap_handler(struct trapframe frame) { struct trapframe *oldframe; struct thread *td; int cpu = PCPU_GET(cpuid); u_int ipi_bitmap; critical_enter(); td = curthread; td->td_intr_nesting_level++; oldframe = td->td_intr_frame; td->td_intr_frame = &frame; ipi_bitmap = atomic_readandclear_int(&cpu_ipi_pending[cpu]); if (ipi_bitmap & (1 << IPI_PREEMPT)) { #ifdef COUNT_IPIS (*ipi_preempt_counts[cpu])++; #endif sched_preempt(td); } if (ipi_bitmap & (1 << IPI_AST)) { #ifdef COUNT_IPIS (*ipi_ast_counts[cpu])++; #endif /* Nothing to do for AST */ } if (ipi_bitmap & (1 << IPI_HARDCLOCK)) { #ifdef COUNT_IPIS (*ipi_hardclock_counts[cpu])++; #endif hardclockintr(); } td->td_intr_frame = oldframe; td->td_intr_nesting_level--; critical_exit(); } /* * send an IPI to a set of cpus. */ void ipi_selected(cpuset_t cpus, u_int ipi) { int cpu; /* * IPI_STOP_HARD maps to a NMI and the trap handler needs a bit * of help in order to understand what is the source. * Set the mask of receiving CPUs for this purpose. */ if (ipi == IPI_STOP_HARD) CPU_OR_ATOMIC(&ipi_nmi_pending, &cpus); while ((cpu = CPU_FFS(&cpus)) != 0) { cpu--; CPU_CLR(cpu, &cpus); CTR3(KTR_SMP, "%s: cpu: %d ipi: %x", __func__, cpu, ipi); ipi_send_cpu(cpu, ipi); } } /* * send an IPI to a specific CPU. */ void ipi_cpu(int cpu, u_int ipi) { /* * IPI_STOP_HARD maps to a NMI and the trap handler needs a bit * of help in order to understand what is the source. * Set the mask of receiving CPUs for this purpose. */ if (ipi == IPI_STOP_HARD) CPU_SET_ATOMIC(cpu, &ipi_nmi_pending); CTR3(KTR_SMP, "%s: cpu: %d ipi: %x", __func__, cpu, ipi); ipi_send_cpu(cpu, ipi); } /* * send an IPI to all CPUs EXCEPT myself */ void ipi_all_but_self(u_int ipi) { cpuset_t other_cpus; other_cpus = all_cpus; CPU_CLR(PCPU_GET(cpuid), &other_cpus); if (IPI_IS_BITMAPED(ipi)) { ipi_selected(other_cpus, ipi); return; } /* * IPI_STOP_HARD maps to a NMI and the trap handler needs a bit * of help in order to understand what is the source. * Set the mask of receiving CPUs for this purpose. */ if (ipi == IPI_STOP_HARD) CPU_OR_ATOMIC(&ipi_nmi_pending, &other_cpus); CTR2(KTR_SMP, "%s: ipi: %x", __func__, ipi); cpu_ops.ipi_vectored(ipi, APIC_IPI_DEST_OTHERS); } int ipi_nmi_handler() { u_int cpuid; /* * As long as there is not a simple way to know about a NMI's * source, if the bitmask for the current CPU is present in * the global pending bitword an IPI_STOP_HARD has been issued * and should be handled. */ cpuid = PCPU_GET(cpuid); if (!CPU_ISSET(cpuid, &ipi_nmi_pending)) return (1); CPU_CLR_ATOMIC(cpuid, &ipi_nmi_pending); cpustop_handler(); return (0); } /* * Handle an IPI_STOP by saving our current context and spinning until we * are resumed. */ void cpustop_handler(void) { u_int cpu; cpu = PCPU_GET(cpuid); savectx(&stoppcbs[cpu]); /* Indicate that we are stopped */ CPU_SET_ATOMIC(cpu, &stopped_cpus); /* Wait for restart */ while (!CPU_ISSET(cpu, &started_cpus)) ia32_pause(); CPU_CLR_ATOMIC(cpu, &started_cpus); CPU_CLR_ATOMIC(cpu, &stopped_cpus); #ifdef DDB amd64_db_resume_dbreg(); #endif if (cpu == 0 && cpustop_restartfunc != NULL) { cpustop_restartfunc(); cpustop_restartfunc = NULL; } } /* * Handle an IPI_SUSPEND by saving our current context and spinning until we * are resumed. */ void cpususpend_handler(void) { u_int cpu; mtx_assert(&smp_ipi_mtx, MA_NOTOWNED); cpu = PCPU_GET(cpuid); if (savectx(&susppcbs[cpu]->sp_pcb)) { fpususpend(susppcbs[cpu]->sp_fpususpend); wbinvd(); CPU_SET_ATOMIC(cpu, &suspended_cpus); /* * Hack for xen, which does not use resumectx() so never * uses the next clause: set resuming_cpus early so that * resume_cpus() can wait on the same bitmap for acpi and * xen. resuming_cpus now means eventually_resumable_cpus. */ CPU_SET_ATOMIC(cpu, &resuming_cpus); } else { fpuresume(susppcbs[cpu]->sp_fpususpend); pmap_init_pat(); initializecpu(); PCPU_SET(switchtime, 0); PCPU_SET(switchticks, ticks); /* Indicate that we are resuming */ CPU_CLR_ATOMIC(cpu, &suspended_cpus); } /* Wait for resume directive */ while (!CPU_ISSET(cpu, &toresume_cpus)) ia32_pause(); if (cpu_ops.cpu_resume) cpu_ops.cpu_resume(); if (vmm_resume_p) vmm_resume_p(); /* Resume MCA and local APIC */ mca_resume(); lapic_setup(0); /* Indicate that we are resumed */ CPU_CLR_ATOMIC(cpu, &resuming_cpus); CPU_CLR_ATOMIC(cpu, &suspended_cpus); CPU_CLR_ATOMIC(cpu, &toresume_cpus); } /* * Handlers for TLB related IPIs */ void invltlb_handler(void) { #ifdef COUNT_XINVLTLB_HITS xhits_gbl[PCPU_GET(cpuid)]++; #endif /* COUNT_XINVLTLB_HITS */ #ifdef COUNT_IPIS (*ipi_invltlb_counts[PCPU_GET(cpuid)])++; #endif /* COUNT_IPIS */ invltlb(); atomic_add_int(&smp_tlb_wait, 1); } void invltlb_pcid_handler(void) { uint64_t cr3; u_int cpuid; #ifdef COUNT_XINVLTLB_HITS xhits_gbl[PCPU_GET(cpuid)]++; #endif /* COUNT_XINVLTLB_HITS */ #ifdef COUNT_IPIS (*ipi_invltlb_counts[PCPU_GET(cpuid)])++; #endif /* COUNT_IPIS */ if (smp_tlb_invpcid.pcid != (uint64_t)-1 && smp_tlb_invpcid.pcid != 0) { if (invpcid_works) { invpcid(&smp_tlb_invpcid, INVPCID_CTX); } else { /* Otherwise reload %cr3 twice. */ cr3 = rcr3(); if (cr3 != pcid_cr3) { load_cr3(pcid_cr3); cr3 |= CR3_PCID_SAVE; } load_cr3(cr3); } } else { invltlb_globpcid(); } if (smp_tlb_pmap != NULL) { cpuid = PCPU_GET(cpuid); if (!CPU_ISSET(cpuid, &smp_tlb_pmap->pm_active)) CPU_CLR_ATOMIC(cpuid, &smp_tlb_pmap->pm_save); } atomic_add_int(&smp_tlb_wait, 1); } void invlpg_handler(void) { #ifdef COUNT_XINVLTLB_HITS xhits_pg[PCPU_GET(cpuid)]++; #endif /* COUNT_XINVLTLB_HITS */ #ifdef COUNT_IPIS (*ipi_invlpg_counts[PCPU_GET(cpuid)])++; #endif /* COUNT_IPIS */ invlpg(smp_tlb_invpcid.addr); atomic_add_int(&smp_tlb_wait, 1); } void invlpg_pcid_handler(void) { uint64_t cr3; #ifdef COUNT_XINVLTLB_HITS xhits_pg[PCPU_GET(cpuid)]++; #endif /* COUNT_XINVLTLB_HITS */ #ifdef COUNT_IPIS (*ipi_invlpg_counts[PCPU_GET(cpuid)])++; #endif /* COUNT_IPIS */ if (smp_tlb_invpcid.pcid == (uint64_t)-1) { invltlb_globpcid(); } else if (smp_tlb_invpcid.pcid == 0) { invlpg(smp_tlb_invpcid.addr); } else if (invpcid_works) { invpcid(&smp_tlb_invpcid, INVPCID_ADDR); } else { /* * PCID supported, but INVPCID is not. * Temporarily switch to the target address * space and do INVLPG. */ cr3 = rcr3(); if (cr3 != pcid_cr3) load_cr3(pcid_cr3 | CR3_PCID_SAVE); invlpg(smp_tlb_invpcid.addr); load_cr3(cr3 | CR3_PCID_SAVE); } atomic_add_int(&smp_tlb_wait, 1); } static inline void invlpg_range(vm_offset_t start, vm_offset_t end) { do { invlpg(start); start += PAGE_SIZE; } while (start < end); } void invlrng_handler(void) { struct invpcid_descr d; vm_offset_t addr; uint64_t cr3; u_int cpuid; #ifdef COUNT_XINVLTLB_HITS xhits_rng[PCPU_GET(cpuid)]++; #endif /* COUNT_XINVLTLB_HITS */ #ifdef COUNT_IPIS (*ipi_invlrng_counts[PCPU_GET(cpuid)])++; #endif /* COUNT_IPIS */ addr = smp_tlb_invpcid.addr; if (pmap_pcid_enabled) { if (smp_tlb_invpcid.pcid == 0) { /* * kernel pmap - use invlpg to invalidate * global mapping. */ invlpg_range(addr, smp_tlb_addr2); } else if (smp_tlb_invpcid.pcid == (uint64_t)-1) { invltlb_globpcid(); if (smp_tlb_pmap != NULL) { cpuid = PCPU_GET(cpuid); if (!CPU_ISSET(cpuid, &smp_tlb_pmap->pm_active)) CPU_CLR_ATOMIC(cpuid, &smp_tlb_pmap->pm_save); } } else if (invpcid_works) { d = smp_tlb_invpcid; do { invpcid(&d, INVPCID_ADDR); d.addr += PAGE_SIZE; } while (d.addr <= smp_tlb_addr2); } else { cr3 = rcr3(); if (cr3 != pcid_cr3) load_cr3(pcid_cr3 | CR3_PCID_SAVE); invlpg_range(addr, smp_tlb_addr2); load_cr3(cr3 | CR3_PCID_SAVE); } } else { invlpg_range(addr, smp_tlb_addr2); } atomic_add_int(&smp_tlb_wait, 1); } void invlcache_handler(void) { #ifdef COUNT_IPIS (*ipi_invlcache_counts[PCPU_GET(cpuid)])++; #endif /* COUNT_IPIS */ wbinvd(); atomic_add_int(&smp_tlb_wait, 1); } /* * This is called once the rest of the system is up and running and we're * ready to let the AP's out of the pen. */ static void release_aps(void *dummy __unused) { if (mp_ncpus == 1) return; atomic_store_rel_int(&aps_ready, 1); while (smp_started == 0) ia32_pause(); } SYSINIT(start_aps, SI_SUB_SMP, SI_ORDER_FIRST, release_aps, NULL); #ifdef COUNT_IPIS /* * Setup interrupt counters for IPI handlers. */ static void mp_ipi_intrcnt(void *dummy) { char buf[64]; int i; CPU_FOREACH(i) { snprintf(buf, sizeof(buf), "cpu%d:invltlb", i); intrcnt_add(buf, &ipi_invltlb_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:invlrng", i); intrcnt_add(buf, &ipi_invlrng_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:invlpg", i); intrcnt_add(buf, &ipi_invlpg_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:invlcache", i); intrcnt_add(buf, &ipi_invlcache_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:preempt", i); intrcnt_add(buf, &ipi_preempt_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:ast", i); intrcnt_add(buf, &ipi_ast_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:rendezvous", i); intrcnt_add(buf, &ipi_rendezvous_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:hardclock", i); intrcnt_add(buf, &ipi_hardclock_counts[i]); } } SYSINIT(mp_ipi_intrcnt, SI_SUB_INTR, SI_ORDER_MIDDLE, mp_ipi_intrcnt, NULL); #endif Index: stable/10/sys/amd64/amd64/trap.c =================================================================== --- stable/10/sys/amd64/amd64/trap.c (revision 333369) +++ stable/10/sys/amd64/amd64/trap.c (revision 333370) @@ -1,999 +1,1036 @@ /*- * Copyright (C) 1994, David Greenman * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the University of Utah, and William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)trap.c 7.4 (Berkeley) 5/13/91 */ #include __FBSDID("$FreeBSD$"); /* * AMD64 Trap and System call handling */ #include "opt_clock.h" +#include "opt_compat.h" #include "opt_cpu.h" #include "opt_hwpmc_hooks.h" #include "opt_isa.h" #include "opt_kdb.h" #include "opt_kdtrace.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef HWPMC_HOOKS #include PMC_SOFT_DEFINE( , , page_fault, all); PMC_SOFT_DEFINE( , , page_fault, read); PMC_SOFT_DEFINE( , , page_fault, write); #endif #include #include #include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif #include #ifdef KDTRACE_HOOKS #include #endif +extern inthand_t IDTVEC(bpt), IDTVEC(dbg), IDTVEC(fast_syscall), + IDTVEC(fast_syscall32), IDTVEC(int0x80_syscall); + extern void trap(struct trapframe *frame); extern void syscall(struct trapframe *frame); void dblfault_handler(struct trapframe *frame); static int trap_pfault(struct trapframe *, int); static void trap_fatal(struct trapframe *, vm_offset_t); #define MAX_TRAP_MSG 32 static char *trap_msg[] = { "", /* 0 unused */ "privileged instruction fault", /* 1 T_PRIVINFLT */ "", /* 2 unused */ "breakpoint instruction fault", /* 3 T_BPTFLT */ "", /* 4 unused */ "", /* 5 unused */ "arithmetic trap", /* 6 T_ARITHTRAP */ "", /* 7 unused */ "", /* 8 unused */ "general protection fault", /* 9 T_PROTFLT */ "trace trap", /* 10 T_TRCTRAP */ "", /* 11 unused */ "page fault", /* 12 T_PAGEFLT */ "", /* 13 unused */ "alignment fault", /* 14 T_ALIGNFLT */ "", /* 15 unused */ "", /* 16 unused */ "", /* 17 unused */ "integer divide fault", /* 18 T_DIVIDE */ "non-maskable interrupt trap", /* 19 T_NMI */ "overflow trap", /* 20 T_OFLOW */ "FPU bounds check fault", /* 21 T_BOUND */ "FPU device not available", /* 22 T_DNA */ "double fault", /* 23 T_DOUBLEFLT */ "FPU operand fetch fault", /* 24 T_FPOPFLT */ "invalid TSS fault", /* 25 T_TSSFLT */ "segment not present fault", /* 26 T_SEGNPFLT */ "stack fault", /* 27 T_STKFLT */ "machine check trap", /* 28 T_MCHK */ "SIMD floating-point exception", /* 29 T_XMMFLT */ "reserved (unknown) fault", /* 30 T_RESERVED */ "", /* 31 unused (reserved) */ "DTrace pid return trap", /* 32 T_DTRACE_RET */ }; #ifdef KDB static int kdb_on_nmi = 1; SYSCTL_INT(_machdep, OID_AUTO, kdb_on_nmi, CTLFLAG_RW, &kdb_on_nmi, 0, "Go to KDB on NMI"); TUNABLE_INT("machdep.kdb_on_nmi", &kdb_on_nmi); #endif static int panic_on_nmi = 1; SYSCTL_INT(_machdep, OID_AUTO, panic_on_nmi, CTLFLAG_RW, &panic_on_nmi, 0, "Panic on NMI"); TUNABLE_INT("machdep.panic_on_nmi", &panic_on_nmi); static int prot_fault_translation; SYSCTL_INT(_machdep, OID_AUTO, prot_fault_translation, CTLFLAG_RW, &prot_fault_translation, 0, "Select signal to deliver on protection fault"); static int uprintf_signal; SYSCTL_INT(_machdep, OID_AUTO, uprintf_signal, CTLFLAG_RW, &uprintf_signal, 0, "Print debugging information on trap signal to ctty"); /* * Exception, fault, and trap interface to the FreeBSD kernel. * This common code is called from assembly language IDT gate entry * routines that prepare a suitable stack frame, and restore this * frame after the exception has been processed. */ void trap(struct trapframe *frame) { #ifdef KDTRACE_HOOKS struct reg regs; #endif struct thread *td = curthread; struct proc *p = td->td_proc; int i = 0, ucode = 0, code; u_int type; register_t addr = 0; ksiginfo_t ksi; PCPU_INC(cnt.v_trap); type = frame->tf_trapno; #ifdef SMP /* Handler for NMI IPIs used for stopping CPUs. */ if (type == T_NMI) { if (ipi_nmi_handler() == 0) goto out; } #endif /* SMP */ #ifdef KDB if (kdb_active) { kdb_reenter(); goto out; } #endif if (type == T_RESERVED) { trap_fatal(frame, 0); goto out; } #ifdef HWPMC_HOOKS /* * CPU PMCs interrupt using an NMI. If the PMC module is * active, pass the 'rip' value to the PMC module's interrupt * handler. A return value of '1' from the handler means that * the NMI was handled by it and we can return immediately. */ if (type == T_NMI && pmc_intr && (*pmc_intr)(PCPU_GET(cpuid), frame)) goto out; #endif if (type == T_MCHK) { mca_intr(); goto out; } #ifdef KDTRACE_HOOKS /* * A trap can occur while DTrace executes a probe. Before * executing the probe, DTrace blocks re-scheduling and sets * a flag in its per-cpu flags to indicate that it doesn't * want to fault. On returning from the probe, the no-fault * flag is cleared and finally re-scheduling is enabled. */ if (dtrace_trap_func != NULL && (*dtrace_trap_func)(frame, type)) goto out; #endif if ((frame->tf_rflags & PSL_I) == 0) { /* * Buggy application or kernel code has disabled * interrupts and then trapped. Enabling interrupts * now is wrong, but it is better than running with * interrupts disabled until they are accidentally * enabled later. */ if (ISPL(frame->tf_cs) == SEL_UPL) uprintf( "pid %ld (%s): trap %d with interrupts disabled\n", (long)curproc->p_pid, curthread->td_name, type); else if (type != T_NMI && type != T_BPTFLT && type != T_TRCTRAP) { /* * XXX not quite right, since this may be for a * multiple fault in user mode. */ printf("kernel trap %d with interrupts disabled\n", type); /* * We shouldn't enable interrupts while holding a * spin lock. */ if (td->td_md.md_spinlock_count == 0) enable_intr(); } } code = frame->tf_err; if (ISPL(frame->tf_cs) == SEL_UPL) { /* user trap */ td->td_pticks = 0; td->td_frame = frame; addr = frame->tf_rip; if (td->td_ucred != p->p_ucred) cred_update_thread(td); switch (type) { case T_PRIVINFLT: /* privileged instruction fault */ i = SIGILL; ucode = ILL_PRVOPC; break; case T_BPTFLT: /* bpt instruction fault */ case T_TRCTRAP: /* trace trap */ enable_intr(); #ifdef KDTRACE_HOOKS if (type == T_BPTFLT) { fill_frame_regs(frame, ®s); if (dtrace_pid_probe_ptr != NULL && dtrace_pid_probe_ptr(®s) == 0) goto out; } #endif frame->tf_rflags &= ~PSL_T; i = SIGTRAP; ucode = (type == T_TRCTRAP ? TRAP_TRACE : TRAP_BRKPT); break; case T_ARITHTRAP: /* arithmetic trap */ ucode = fputrap_x87(); if (ucode == -1) goto userout; i = SIGFPE; break; case T_PROTFLT: /* general protection fault */ i = SIGBUS; ucode = BUS_OBJERR; break; case T_STKFLT: /* stack fault */ case T_SEGNPFLT: /* segment not present fault */ i = SIGBUS; ucode = BUS_ADRERR; break; case T_TSSFLT: /* invalid TSS fault */ i = SIGBUS; ucode = BUS_OBJERR; break; case T_ALIGNFLT: i = SIGBUS; ucode = BUS_ADRALN; break; case T_DOUBLEFLT: /* double fault */ default: i = SIGBUS; ucode = BUS_OBJERR; break; case T_PAGEFLT: /* page fault */ /* * Emulator can take care about this trap? */ if (*p->p_sysent->sv_trap != NULL && (*p->p_sysent->sv_trap)(td) == 0) goto userout; addr = frame->tf_addr; i = trap_pfault(frame, TRUE); if (i == -1) goto userout; if (i == 0) goto user; if (i == SIGSEGV) ucode = SEGV_MAPERR; else { if (prot_fault_translation == 0) { /* * Autodetect. * This check also covers the images * without the ABI-tag ELF note. */ if (SV_CURPROC_ABI() == SV_ABI_FREEBSD && p->p_osrel >= P_OSREL_SIGSEGV) { i = SIGSEGV; ucode = SEGV_ACCERR; } else { i = SIGBUS; ucode = BUS_PAGE_FAULT; } } else if (prot_fault_translation == 1) { /* * Always compat mode. */ i = SIGBUS; ucode = BUS_PAGE_FAULT; } else { /* * Always SIGSEGV mode. */ i = SIGSEGV; ucode = SEGV_ACCERR; } } break; case T_DIVIDE: /* integer divide fault */ ucode = FPE_INTDIV; i = SIGFPE; break; #ifdef DEV_ISA case T_NMI: /* machine/parity/power fail/"kitchen sink" faults */ if (isa_nmi(code) == 0) { #ifdef KDB /* * NMI can be hooked up to a pushbutton * for debugging. */ if (kdb_on_nmi) { printf ("NMI ... going to debugger\n"); kdb_trap(type, 0, frame); } #endif /* KDB */ goto userout; } else if (panic_on_nmi) panic("NMI indicates hardware failure"); goto out; #endif /* DEV_ISA */ case T_OFLOW: /* integer overflow fault */ ucode = FPE_INTOVF; i = SIGFPE; break; case T_BOUND: /* bounds check fault */ ucode = FPE_FLTSUB; i = SIGFPE; break; case T_DNA: /* transparent fault (due to context switch "late") */ KASSERT(PCB_USER_FPU(td->td_pcb), ("kernel FPU ctx has leaked")); fpudna(); goto userout; case T_FPOPFLT: /* FPU operand fetch fault */ ucode = ILL_COPROC; i = SIGILL; break; case T_XMMFLT: /* SIMD floating-point exception */ ucode = fputrap_sse(); if (ucode == -1) goto userout; i = SIGFPE; break; #ifdef KDTRACE_HOOKS case T_DTRACE_RET: enable_intr(); fill_frame_regs(frame, ®s); if (dtrace_return_probe_ptr != NULL && dtrace_return_probe_ptr(®s) == 0) goto out; goto userout; #endif } } else { /* kernel trap */ KASSERT(cold || td->td_ucred != NULL, ("kernel trap doesn't have ucred")); switch (type) { case T_PAGEFLT: /* page fault */ (void) trap_pfault(frame, FALSE); goto out; case T_DNA: if (PCB_USER_FPU(td->td_pcb)) panic("Unregistered use of FPU in kernel"); fpudna(); goto out; case T_ARITHTRAP: /* arithmetic trap */ case T_XMMFLT: /* SIMD floating-point exception */ case T_FPOPFLT: /* FPU operand fetch fault */ /* * For now, supporting kernel handler * registration for FPU traps is overkill. */ trap_fatal(frame, 0); goto out; case T_STKFLT: /* stack fault */ case T_PROTFLT: /* general protection fault */ case T_SEGNPFLT: /* segment not present fault */ if (td->td_intr_nesting_level != 0) break; /* * Invalid segment selectors and out of bounds * %rip's and %rsp's can be set up in user mode. * This causes a fault in kernel mode when the * kernel tries to return to user mode. We want * to get this fault so that we can fix the * problem here and not have to check all the * selectors and pointers when the user changes * them. */ if (frame->tf_rip == (long)doreti_iret) { frame->tf_rip = (long)doreti_iret_fault; goto out; } if (frame->tf_rip == (long)ld_ds) { frame->tf_rip = (long)ds_load_fault; goto out; } if (frame->tf_rip == (long)ld_es) { frame->tf_rip = (long)es_load_fault; goto out; } if (frame->tf_rip == (long)ld_fs) { frame->tf_rip = (long)fs_load_fault; goto out; } if (frame->tf_rip == (long)ld_gs) { frame->tf_rip = (long)gs_load_fault; goto out; } if (frame->tf_rip == (long)ld_gsbase) { frame->tf_rip = (long)gsbase_load_fault; goto out; } if (frame->tf_rip == (long)ld_fsbase) { frame->tf_rip = (long)fsbase_load_fault; goto out; } if (curpcb->pcb_onfault != NULL) { frame->tf_rip = (long)curpcb->pcb_onfault; goto out; } break; case T_TSSFLT: /* * PSL_NT can be set in user mode and isn't cleared * automatically when the kernel is entered. This * causes a TSS fault when the kernel attempts to * `iret' because the TSS link is uninitialized. We * want to get this fault so that we can fix the * problem here and not every time the kernel is * entered. */ if (frame->tf_rflags & PSL_NT) { frame->tf_rflags &= ~PSL_NT; goto out; } break; case T_TRCTRAP: /* trace trap */ /* * Ignore debug register trace traps due to * accesses in the user's address space, which * can happen under several conditions such as * if a user sets a watchpoint on a buffer and * then passes that buffer to a system call. * We still want to get TRCTRAPS for addresses * in kernel space because that is useful when * debugging the kernel. */ if (user_dbreg_trap()) { /* * Reset breakpoint bits because the * processor doesn't */ /* XXX check upper bits here */ load_dr6(rdr6() & 0xfffffff0); goto out; } + + /* + * Malicious user code can configure a debug + * register watchpoint to trap on data access + * to the top of stack and then execute 'pop + * %ss; int 3'. Due to exception deferral for + * 'pop %ss', the CPU will not interrupt 'int + * 3' to raise the DB# exception for the debug + * register but will postpone the DB# until + * execution of the first instruction of the + * BP# handler (in kernel mode). Normally the + * previous check would ignore DB# exceptions + * for watchpoints on user addresses raised in + * kernel mode. However, some CPU errata + * include cases where DB# exceptions do not + * properly set bits in %dr6, e.g. Haswell + * HSD23 and Skylake-X SKZ24. + * + * A deferred DB# can also be raised on the + * first instructions of system call entry + * points or single-step traps via similar use + * of 'pop %ss' or 'mov xxx, %ss'. + */ + if (frame->tf_rip == (uintptr_t)IDTVEC(fast_syscall) || +#ifdef COMPAT_FREEBSD32 + frame->tf_rip == + (uintptr_t)IDTVEC(int0x80_syscall) || +#endif + frame->tf_rip == (uintptr_t)IDTVEC(bpt) || + frame->tf_rip == (uintptr_t)IDTVEC(dbg) || + /* Needed for AMD. */ + frame->tf_rip == (uintptr_t)IDTVEC(fast_syscall32)) + return; /* * FALLTHROUGH (TRCTRAP kernel mode, kernel address) */ case T_BPTFLT: /* * If KDB is enabled, let it handle the debugger trap. * Otherwise, debugger traps "can't happen". */ #ifdef KDB if (kdb_trap(type, 0, frame)) goto out; #endif break; #ifdef DEV_ISA case T_NMI: /* machine/parity/power fail/"kitchen sink" faults */ if (isa_nmi(code) == 0) { #ifdef KDB /* * NMI can be hooked up to a pushbutton * for debugging. */ if (kdb_on_nmi) { printf ("NMI ... going to debugger\n"); kdb_trap(type, 0, frame); } #endif /* KDB */ goto out; } else if (panic_on_nmi == 0) goto out; /* FALLTHROUGH */ #endif /* DEV_ISA */ } trap_fatal(frame, 0); goto out; } /* Translate fault for emulators (e.g. Linux) */ if (*p->p_sysent->sv_transtrap) i = (*p->p_sysent->sv_transtrap)(i, type); ksiginfo_init_trap(&ksi); ksi.ksi_signo = i; ksi.ksi_code = ucode; ksi.ksi_trapno = type; ksi.ksi_addr = (void *)addr; if (uprintf_signal) { uprintf("pid %d comm %s: signal %d err %lx code %d type %d " "addr 0x%lx rsp 0x%lx rip 0x%lx " "<%02x %02x %02x %02x %02x %02x %02x %02x>\n", p->p_pid, p->p_comm, i, frame->tf_err, ucode, type, addr, frame->tf_rsp, frame->tf_rip, fubyte((void *)(frame->tf_rip + 0)), fubyte((void *)(frame->tf_rip + 1)), fubyte((void *)(frame->tf_rip + 2)), fubyte((void *)(frame->tf_rip + 3)), fubyte((void *)(frame->tf_rip + 4)), fubyte((void *)(frame->tf_rip + 5)), fubyte((void *)(frame->tf_rip + 6)), fubyte((void *)(frame->tf_rip + 7))); } KASSERT((read_rflags() & PSL_I) != 0, ("interrupts disabled")); trapsignal(td, &ksi); user: userret(td, frame); KASSERT(PCB_USER_FPU(td->td_pcb), ("Return from trap with kernel FPU ctx leaked")); userout: out: return; } static int trap_pfault(frame, usermode) struct trapframe *frame; int usermode; { vm_offset_t va; struct vmspace *vm; vm_map_t map; int rv = 0; vm_prot_t ftype; struct thread *td = curthread; struct proc *p = td->td_proc; vm_offset_t eva = frame->tf_addr; if (__predict_false((td->td_pflags & TDP_NOFAULTING) != 0)) { /* * Due to both processor errata and lazy TLB invalidation when * access restrictions are removed from virtual pages, memory * accesses that are allowed by the physical mapping layer may * nonetheless cause one spurious page fault per virtual page. * When the thread is executing a "no faulting" section that * is bracketed by vm_fault_{disable,enable}_pagefaults(), * every page fault is treated as a spurious page fault, * unless it accesses the same virtual address as the most * recent page fault within the same "no faulting" section. */ if (td->td_md.md_spurflt_addr != eva || (td->td_pflags & TDP_RESETSPUR) != 0) { /* * Do nothing to the TLB. A stale TLB entry is * flushed automatically by a page fault. */ td->td_md.md_spurflt_addr = eva; td->td_pflags &= ~TDP_RESETSPUR; return (0); } } else { /* * If we get a page fault while in a critical section, then * it is most likely a fatal kernel page fault. The kernel * is already going to panic trying to get a sleep lock to * do the VM lookup, so just consider it a fatal trap so the * kernel can print out a useful trap message and even get * to the debugger. * * If we get a page fault while holding a non-sleepable * lock, then it is most likely a fatal kernel page fault. * If WITNESS is enabled, then it's going to whine about * bogus LORs with various VM locks, so just skip to the * fatal trap handling directly. */ if (td->td_critnest != 0 || WITNESS_CHECK(WARN_SLEEPOK | WARN_GIANTOK, NULL, "Kernel page fault") != 0) { trap_fatal(frame, eva); return (-1); } } va = trunc_page(eva); if (va >= VM_MIN_KERNEL_ADDRESS) { /* * Don't allow user-mode faults in kernel address space. */ if (usermode) goto nogo; map = kernel_map; } else { /* * This is a fault on non-kernel virtual memory. If either * p or p->p_vmspace is NULL, then the fault is fatal. */ if (p == NULL || (vm = p->p_vmspace) == NULL) goto nogo; map = &vm->vm_map; /* * When accessing a usermode address, kernel must be * ready to accept the page fault, and provide a * handling routine. Since accessing the address * without the handler is a bug, do not try to handle * it normally, and panic immediately. */ if (!usermode && (td->td_intr_nesting_level != 0 || curpcb->pcb_onfault == NULL)) { trap_fatal(frame, eva); return (-1); } } /* * If the trap was caused by errant bits in the PTE then panic. */ if (frame->tf_err & PGEX_RSV) { trap_fatal(frame, eva); return (-1); } /* * PGEX_I is defined only if the execute disable bit capability is * supported and enabled. */ if (frame->tf_err & PGEX_W) ftype = VM_PROT_WRITE; else if ((frame->tf_err & PGEX_I) && pg_nx != 0) ftype = VM_PROT_EXECUTE; else ftype = VM_PROT_READ; if (map != kernel_map) { /* * Keep swapout from messing with us during this * critical time. */ PROC_LOCK(p); ++p->p_lock; PROC_UNLOCK(p); /* Fault in the user page: */ rv = vm_fault(map, va, ftype, VM_FAULT_NORMAL); PROC_LOCK(p); --p->p_lock; PROC_UNLOCK(p); } else { /* * Don't have to worry about process locking or stacks in the * kernel. */ rv = vm_fault(map, va, ftype, VM_FAULT_NORMAL); } if (rv == KERN_SUCCESS) { #ifdef HWPMC_HOOKS if (ftype == VM_PROT_READ || ftype == VM_PROT_WRITE) { PMC_SOFT_CALL_TF( , , page_fault, all, frame); if (ftype == VM_PROT_READ) PMC_SOFT_CALL_TF( , , page_fault, read, frame); else PMC_SOFT_CALL_TF( , , page_fault, write, frame); } #endif return (0); } nogo: if (!usermode) { if (td->td_intr_nesting_level == 0 && curpcb->pcb_onfault != NULL) { frame->tf_rip = (long)curpcb->pcb_onfault; return (0); } trap_fatal(frame, eva); return (-1); } return ((rv == KERN_PROTECTION_FAILURE) ? SIGBUS : SIGSEGV); } static void trap_fatal(frame, eva) struct trapframe *frame; vm_offset_t eva; { int code, ss; u_int type; long esp; struct soft_segment_descriptor softseg; char *msg; #ifdef KDB bool handled; #endif code = frame->tf_err; type = frame->tf_trapno; sdtossd(&gdt[NGDT * PCPU_GET(cpuid) + IDXSEL(frame->tf_cs & 0xffff)], &softseg); if (type <= MAX_TRAP_MSG) msg = trap_msg[type]; else msg = "UNKNOWN"; printf("\n\nFatal trap %d: %s while in %s mode\n", type, msg, ISPL(frame->tf_cs) == SEL_UPL ? "user" : "kernel"); #ifdef SMP /* two separate prints in case of a trap on an unmapped page */ printf("cpuid = %d; ", PCPU_GET(cpuid)); printf("apic id = %02x\n", PCPU_GET(apic_id)); #endif if (type == T_PAGEFLT) { printf("fault virtual address = 0x%lx\n", eva); printf("fault code = %s %s %s, %s\n", code & PGEX_U ? "user" : "supervisor", code & PGEX_W ? "write" : "read", code & PGEX_I ? "instruction" : "data", code & PGEX_RSV ? "reserved bits in PTE" : code & PGEX_P ? "protection violation" : "page not present"); } printf("instruction pointer = 0x%lx:0x%lx\n", frame->tf_cs & 0xffff, frame->tf_rip); if (ISPL(frame->tf_cs) == SEL_UPL) { ss = frame->tf_ss & 0xffff; esp = frame->tf_rsp; } else { ss = GSEL(GDATA_SEL, SEL_KPL); esp = (long)&frame->tf_rsp; } printf("stack pointer = 0x%x:0x%lx\n", ss, esp); printf("frame pointer = 0x%x:0x%lx\n", ss, frame->tf_rbp); printf("code segment = base 0x%lx, limit 0x%lx, type 0x%x\n", softseg.ssd_base, softseg.ssd_limit, softseg.ssd_type); printf(" = DPL %d, pres %d, long %d, def32 %d, gran %d\n", softseg.ssd_dpl, softseg.ssd_p, softseg.ssd_long, softseg.ssd_def32, softseg.ssd_gran); printf("processor eflags = "); if (frame->tf_rflags & PSL_T) printf("trace trap, "); if (frame->tf_rflags & PSL_I) printf("interrupt enabled, "); if (frame->tf_rflags & PSL_NT) printf("nested task, "); if (frame->tf_rflags & PSL_RF) printf("resume, "); printf("IOPL = %ld\n", (frame->tf_rflags & PSL_IOPL) >> 12); printf("current process = %d (%s)\n", curproc->p_pid, curthread->td_name); #ifdef KDB if (debugger_on_panic) { kdb_why = KDB_WHY_TRAP; handled = kdb_trap(type, 0, frame); kdb_why = KDB_WHY_UNSET; if (handled) return; } #endif printf("trap number = %d\n", type); if (type <= MAX_TRAP_MSG) panic("%s", trap_msg[type]); else panic("unknown/reserved trap"); } /* * Double fault handler. Called when a fault occurs while writing * a frame for a trap/exception onto the stack. This usually occurs * when the stack overflows (such is the case with infinite recursion, * for example). */ void dblfault_handler(struct trapframe *frame) { #ifdef KDTRACE_HOOKS if (dtrace_doubletrap_func != NULL) (*dtrace_doubletrap_func)(); #endif printf("\nFatal double fault\n"); printf("rip = 0x%lx\n", frame->tf_rip); printf("rsp = 0x%lx\n", frame->tf_rsp); printf("rbp = 0x%lx\n", frame->tf_rbp); #ifdef SMP /* two separate prints in case of a trap on an unmapped page */ printf("cpuid = %d; ", PCPU_GET(cpuid)); printf("apic id = %02x\n", PCPU_GET(apic_id)); #endif panic("double fault"); } int cpu_fetch_syscall_args(struct thread *td, struct syscall_args *sa) { struct proc *p; struct trapframe *frame; register_t *argp; caddr_t params; int reg, regcnt, error; p = td->td_proc; frame = td->td_frame; reg = 0; regcnt = 6; params = (caddr_t)frame->tf_rsp + sizeof(register_t); sa->code = frame->tf_rax; if (sa->code == SYS_syscall || sa->code == SYS___syscall) { sa->code = frame->tf_rdi; reg++; regcnt--; } if (p->p_sysent->sv_mask) sa->code &= p->p_sysent->sv_mask; if (sa->code >= p->p_sysent->sv_size) sa->callp = &p->p_sysent->sv_table[0]; else sa->callp = &p->p_sysent->sv_table[sa->code]; sa->narg = sa->callp->sy_narg; KASSERT(sa->narg <= sizeof(sa->args) / sizeof(sa->args[0]), ("Too many syscall arguments!")); error = 0; argp = &frame->tf_rdi; argp += reg; bcopy(argp, sa->args, sizeof(sa->args[0]) * regcnt); if (sa->narg > regcnt) { KASSERT(params != NULL, ("copyin args with no params!")); error = copyin(params, &sa->args[regcnt], (sa->narg - regcnt) * sizeof(sa->args[0])); } if (error == 0) { td->td_retval[0] = 0; td->td_retval[1] = frame->tf_rdx; } return (error); } #include "../../kern/subr_syscall.c" /* * System call handler for native binaries. The trap frame is already * set up by the assembler trampoline and a pointer to it is saved in * td_frame. */ void amd64_syscall(struct thread *td, int traced) { struct syscall_args sa; int error; ksiginfo_t ksi; #ifdef DIAGNOSTIC if (ISPL(td->td_frame->tf_cs) != SEL_UPL) { panic("syscall"); /* NOT REACHED */ } #endif error = syscallenter(td, &sa); /* * Traced syscall. */ if (__predict_false(traced)) { td->td_frame->tf_rflags &= ~PSL_T; ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGTRAP; ksi.ksi_code = TRAP_TRACE; ksi.ksi_addr = (void *)td->td_frame->tf_rip; trapsignal(td, &ksi); } KASSERT(PCB_USER_FPU(td->td_pcb), ("System call %s returning with kernel FPU ctx leaked", syscallname(td->td_proc, sa.code))); KASSERT(td->td_pcb->pcb_save == get_pcb_user_save_td(td), ("System call %s returning with mangled pcb_save", syscallname(td->td_proc, sa.code))); syscallret(td, error, &sa); /* * If the user-supplied value of %rip is not a canonical * address, then some CPUs will trigger a ring 0 #GP during * the sysret instruction. However, the fault handler would * execute in ring 0 with the user's %gs and %rsp which would * not be safe. Instead, use the full return path which * catches the problem safely. */ if (td->td_frame->tf_rip >= VM_MAXUSER_ADDRESS) set_pcb_flags(td->td_pcb, PCB_FULL_IRET); } Index: stable/10/sys/i386/i386/trap.c =================================================================== --- stable/10/sys/i386/i386/trap.c (revision 333369) +++ stable/10/sys/i386/i386/trap.c (revision 333370) @@ -1,1181 +1,1211 @@ /*- * Copyright (C) 1994, David Greenman * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the University of Utah, and William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)trap.c 7.4 (Berkeley) 5/13/91 */ #include __FBSDID("$FreeBSD$"); /* * 386 Trap and System call handling */ #include "opt_clock.h" #include "opt_cpu.h" #include "opt_hwpmc_hooks.h" #include "opt_isa.h" #include "opt_kdb.h" #include "opt_kdtrace.h" #include "opt_npx.h" #include "opt_trap.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef HWPMC_HOOKS #include PMC_SOFT_DEFINE( , , page_fault, all); PMC_SOFT_DEFINE( , , page_fault, read); PMC_SOFT_DEFINE( , , page_fault, write); #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif #include #include #ifdef POWERFAIL_NMI #include #include #endif #ifdef KDTRACE_HOOKS #include #endif extern void trap(struct trapframe *frame); extern void syscall(struct trapframe *frame); static int trap_pfault(struct trapframe *, int, vm_offset_t); static void trap_fatal(struct trapframe *, vm_offset_t); void dblfault_handler(void); extern inthand_t IDTVEC(lcall_syscall); +extern inthand_t IDTVEC(bpt), IDTVEC(dbg), IDTVEC(int0x80_syscall); + #define MAX_TRAP_MSG 32 static char *trap_msg[] = { "", /* 0 unused */ "privileged instruction fault", /* 1 T_PRIVINFLT */ "", /* 2 unused */ "breakpoint instruction fault", /* 3 T_BPTFLT */ "", /* 4 unused */ "", /* 5 unused */ "arithmetic trap", /* 6 T_ARITHTRAP */ "", /* 7 unused */ "", /* 8 unused */ "general protection fault", /* 9 T_PROTFLT */ "trace trap", /* 10 T_TRCTRAP */ "", /* 11 unused */ "page fault", /* 12 T_PAGEFLT */ "", /* 13 unused */ "alignment fault", /* 14 T_ALIGNFLT */ "", /* 15 unused */ "", /* 16 unused */ "", /* 17 unused */ "integer divide fault", /* 18 T_DIVIDE */ "non-maskable interrupt trap", /* 19 T_NMI */ "overflow trap", /* 20 T_OFLOW */ "FPU bounds check fault", /* 21 T_BOUND */ "FPU device not available", /* 22 T_DNA */ "double fault", /* 23 T_DOUBLEFLT */ "FPU operand fetch fault", /* 24 T_FPOPFLT */ "invalid TSS fault", /* 25 T_TSSFLT */ "segment not present fault", /* 26 T_SEGNPFLT */ "stack fault", /* 27 T_STKFLT */ "machine check trap", /* 28 T_MCHK */ "SIMD floating-point exception", /* 29 T_XMMFLT */ "reserved (unknown) fault", /* 30 T_RESERVED */ "", /* 31 unused (reserved) */ "DTrace pid return trap", /* 32 T_DTRACE_RET */ }; #if defined(I586_CPU) && !defined(NO_F00F_HACK) int has_f00f_bug = 0; /* Initialized so that it can be patched. */ #endif #ifdef KDB static int kdb_on_nmi = 1; SYSCTL_INT(_machdep, OID_AUTO, kdb_on_nmi, CTLFLAG_RW, &kdb_on_nmi, 0, "Go to KDB on NMI"); TUNABLE_INT("machdep.kdb_on_nmi", &kdb_on_nmi); #endif static int panic_on_nmi = 1; SYSCTL_INT(_machdep, OID_AUTO, panic_on_nmi, CTLFLAG_RW, &panic_on_nmi, 0, "Panic on NMI"); TUNABLE_INT("machdep.panic_on_nmi", &panic_on_nmi); static int prot_fault_translation = 0; SYSCTL_INT(_machdep, OID_AUTO, prot_fault_translation, CTLFLAG_RW, &prot_fault_translation, 0, "Select signal to deliver on protection fault"); static int uprintf_signal; SYSCTL_INT(_machdep, OID_AUTO, uprintf_signal, CTLFLAG_RW, &uprintf_signal, 0, "Print debugging information on trap signal to ctty"); /* * Exception, fault, and trap interface to the FreeBSD kernel. * This common code is called from assembly language IDT gate entry * routines that prepare a suitable stack frame, and restore this * frame after the exception has been processed. */ void trap(struct trapframe *frame) { #ifdef KDTRACE_HOOKS struct reg regs; #endif struct thread *td = curthread; struct proc *p = td->td_proc; int i = 0, ucode = 0, code; u_int type; register_t addr = 0; vm_offset_t eva; ksiginfo_t ksi; #ifdef POWERFAIL_NMI static int lastalert = 0; #endif PCPU_INC(cnt.v_trap); type = frame->tf_trapno; #ifdef SMP /* Handler for NMI IPIs used for stopping CPUs. */ if (type == T_NMI) { if (ipi_nmi_handler() == 0) goto out; } #endif /* SMP */ #ifdef KDB if (kdb_active) { kdb_reenter(); goto out; } #endif if (type == T_RESERVED) { trap_fatal(frame, 0); goto out; } #ifdef HWPMC_HOOKS /* * CPU PMCs interrupt using an NMI so we check for that first. * If the HWPMC module is active, 'pmc_hook' will point to * the function to be called. A return value of '1' from the * hook means that the NMI was handled by it and that we can * return immediately. */ if (type == T_NMI && pmc_intr && (*pmc_intr)(PCPU_GET(cpuid), frame)) goto out; #endif if (type == T_MCHK) { mca_intr(); goto out; } #ifdef KDTRACE_HOOKS /* * A trap can occur while DTrace executes a probe. Before * executing the probe, DTrace blocks re-scheduling and sets * a flag in its per-cpu flags to indicate that it doesn't * want to fault. On returning from the probe, the no-fault * flag is cleared and finally re-scheduling is enabled. */ if ((type == T_PROTFLT || type == T_PAGEFLT) && dtrace_trap_func != NULL && (*dtrace_trap_func)(frame, type)) goto out; #endif if ((frame->tf_eflags & PSL_I) == 0) { /* * Buggy application or kernel code has disabled * interrupts and then trapped. Enabling interrupts * now is wrong, but it is better than running with * interrupts disabled until they are accidentally * enabled later. */ if (ISPL(frame->tf_cs) == SEL_UPL || (frame->tf_eflags & PSL_VM)) uprintf( "pid %ld (%s): trap %d with interrupts disabled\n", (long)curproc->p_pid, curthread->td_name, type); else if (type != T_NMI && type != T_BPTFLT && type != T_TRCTRAP && frame->tf_eip != (int)cpu_switch_load_gs) { /* * XXX not quite right, since this may be for a * multiple fault in user mode. */ printf("kernel trap %d with interrupts disabled\n", type); /* * Page faults need interrupts disabled until later, * and we shouldn't enable interrupts while holding * a spin lock. */ if (type != T_PAGEFLT && td->td_md.md_spinlock_count == 0) enable_intr(); } } eva = 0; code = frame->tf_err; if (type == T_PAGEFLT) { /* * For some Cyrix CPUs, %cr2 is clobbered by * interrupts. This problem is worked around by using * an interrupt gate for the pagefault handler. We * are finally ready to read %cr2 and conditionally * reenable interrupts. If we hold a spin lock, then * we must not reenable interrupts. This might be a * spurious page fault. */ eva = rcr2(); if (td->td_md.md_spinlock_count == 0) enable_intr(); } if ((ISPL(frame->tf_cs) == SEL_UPL) || ((frame->tf_eflags & PSL_VM) && !(curpcb->pcb_flags & PCB_VM86CALL))) { /* user trap */ td->td_pticks = 0; td->td_frame = frame; addr = frame->tf_eip; if (td->td_ucred != p->p_ucred) cred_update_thread(td); switch (type) { case T_PRIVINFLT: /* privileged instruction fault */ i = SIGILL; ucode = ILL_PRVOPC; break; case T_BPTFLT: /* bpt instruction fault */ case T_TRCTRAP: /* trace trap */ enable_intr(); #ifdef KDTRACE_HOOKS if (type == T_BPTFLT) { fill_frame_regs(frame, ®s); if (dtrace_pid_probe_ptr != NULL && dtrace_pid_probe_ptr(®s) == 0) goto out; } #endif frame->tf_eflags &= ~PSL_T; i = SIGTRAP; ucode = (type == T_TRCTRAP ? TRAP_TRACE : TRAP_BRKPT); break; case T_ARITHTRAP: /* arithmetic trap */ #ifdef DEV_NPX ucode = npxtrap_x87(); if (ucode == -1) goto userout; #else ucode = 0; #endif i = SIGFPE; break; /* * The following two traps can happen in * vm86 mode, and, if so, we want to handle * them specially. */ case T_PROTFLT: /* general protection fault */ case T_STKFLT: /* stack fault */ if (frame->tf_eflags & PSL_VM) { i = vm86_emulate((struct vm86frame *)frame); if (i == 0) goto user; break; } i = SIGBUS; ucode = (type == T_PROTFLT) ? BUS_OBJERR : BUS_ADRERR; break; case T_SEGNPFLT: /* segment not present fault */ i = SIGBUS; ucode = BUS_ADRERR; break; case T_TSSFLT: /* invalid TSS fault */ i = SIGBUS; ucode = BUS_OBJERR; break; case T_ALIGNFLT: i = SIGBUS; ucode = BUS_ADRALN; break; case T_DOUBLEFLT: /* double fault */ default: i = SIGBUS; ucode = BUS_OBJERR; break; case T_PAGEFLT: /* page fault */ i = trap_pfault(frame, TRUE, eva); #if defined(I586_CPU) && !defined(NO_F00F_HACK) if (i == -2) { /* * The f00f hack workaround has triggered, so * treat the fault as an illegal instruction * (T_PRIVINFLT) instead of a page fault. */ type = frame->tf_trapno = T_PRIVINFLT; /* Proceed as in that case. */ ucode = ILL_PRVOPC; i = SIGILL; break; } #endif if (i == -1) goto userout; if (i == 0) goto user; if (i == SIGSEGV) ucode = SEGV_MAPERR; else { if (prot_fault_translation == 0) { /* * Autodetect. * This check also covers the images * without the ABI-tag ELF note. */ if (SV_CURPROC_ABI() == SV_ABI_FREEBSD && p->p_osrel >= P_OSREL_SIGSEGV) { i = SIGSEGV; ucode = SEGV_ACCERR; } else { i = SIGBUS; ucode = BUS_PAGE_FAULT; } } else if (prot_fault_translation == 1) { /* * Always compat mode. */ i = SIGBUS; ucode = BUS_PAGE_FAULT; } else { /* * Always SIGSEGV mode. */ i = SIGSEGV; ucode = SEGV_ACCERR; } } addr = eva; break; case T_DIVIDE: /* integer divide fault */ ucode = FPE_INTDIV; i = SIGFPE; break; #ifdef DEV_ISA case T_NMI: #ifdef POWERFAIL_NMI #ifndef TIMER_FREQ # define TIMER_FREQ 1193182 #endif if (time_second - lastalert > 10) { log(LOG_WARNING, "NMI: power fail\n"); sysbeep(880, hz); lastalert = time_second; } goto userout; #else /* !POWERFAIL_NMI */ /* machine/parity/power fail/"kitchen sink" faults */ if (isa_nmi(code) == 0) { #ifdef KDB /* * NMI can be hooked up to a pushbutton * for debugging. */ if (kdb_on_nmi) { printf ("NMI ... going to debugger\n"); kdb_trap(type, 0, frame); } #endif /* KDB */ goto userout; } else if (panic_on_nmi) panic("NMI indicates hardware failure"); goto out; #endif /* POWERFAIL_NMI */ #endif /* DEV_ISA */ case T_OFLOW: /* integer overflow fault */ ucode = FPE_INTOVF; i = SIGFPE; break; case T_BOUND: /* bounds check fault */ ucode = FPE_FLTSUB; i = SIGFPE; break; case T_DNA: #ifdef DEV_NPX KASSERT(PCB_USER_FPU(td->td_pcb), ("kernel FPU ctx has leaked")); /* transparent fault (due to context switch "late") */ if (npxdna()) goto userout; #endif uprintf("pid %d killed due to lack of floating point\n", p->p_pid); i = SIGKILL; ucode = 0; break; case T_FPOPFLT: /* FPU operand fetch fault */ ucode = ILL_COPROC; i = SIGILL; break; case T_XMMFLT: /* SIMD floating-point exception */ #if defined(DEV_NPX) && !defined(CPU_DISABLE_SSE) && defined(I686_CPU) ucode = npxtrap_sse(); if (ucode == -1) goto userout; #else ucode = 0; #endif i = SIGFPE; break; #ifdef KDTRACE_HOOKS case T_DTRACE_RET: enable_intr(); fill_frame_regs(frame, ®s); if (dtrace_return_probe_ptr != NULL && dtrace_return_probe_ptr(®s) == 0) goto out; goto userout; #endif } } else { /* kernel trap */ KASSERT(cold || td->td_ucred != NULL, ("kernel trap doesn't have ucred")); switch (type) { case T_PAGEFLT: /* page fault */ (void) trap_pfault(frame, FALSE, eva); goto out; case T_DNA: #ifdef DEV_NPX if (PCB_USER_FPU(td->td_pcb)) panic("Unregistered use of FPU in kernel"); if (npxdna()) goto out; #endif break; case T_ARITHTRAP: /* arithmetic trap */ case T_XMMFLT: /* SIMD floating-point exception */ case T_FPOPFLT: /* FPU operand fetch fault */ /* * XXXKIB for now disable any FPU traps in kernel * handler registration seems to be overkill */ trap_fatal(frame, 0); goto out; /* * The following two traps can happen in * vm86 mode, and, if so, we want to handle * them specially. */ case T_PROTFLT: /* general protection fault */ case T_STKFLT: /* stack fault */ if (frame->tf_eflags & PSL_VM) { i = vm86_emulate((struct vm86frame *)frame); if (i != 0) /* * returns to original process */ vm86_trap((struct vm86frame *)frame); goto out; } /* FALL THROUGH */ case T_SEGNPFLT: /* segment not present fault */ if (curpcb->pcb_flags & PCB_VM86CALL) break; /* * Invalid %fs's and %gs's can be created using * procfs or PT_SETREGS or by invalidating the * underlying LDT entry. This causes a fault * in kernel mode when the kernel attempts to * switch contexts. Lose the bad context * (XXX) so that we can continue, and generate * a signal. */ if (frame->tf_eip == (int)cpu_switch_load_gs) { curpcb->pcb_gs = 0; #if 0 PROC_LOCK(p); kern_psignal(p, SIGBUS); PROC_UNLOCK(p); #endif goto out; } if (td->td_intr_nesting_level != 0) break; /* * Invalid segment selectors and out of bounds * %eip's and %esp's can be set up in user mode. * This causes a fault in kernel mode when the * kernel tries to return to user mode. We want * to get this fault so that we can fix the * problem here and not have to check all the * selectors and pointers when the user changes * them. */ if (frame->tf_eip == (int)doreti_iret) { frame->tf_eip = (int)doreti_iret_fault; goto out; } if (type == T_STKFLT) break; if (frame->tf_eip == (int)doreti_popl_ds) { frame->tf_eip = (int)doreti_popl_ds_fault; goto out; } if (frame->tf_eip == (int)doreti_popl_es) { frame->tf_eip = (int)doreti_popl_es_fault; goto out; } if (frame->tf_eip == (int)doreti_popl_fs) { frame->tf_eip = (int)doreti_popl_fs_fault; goto out; } if (curpcb->pcb_onfault != NULL) { frame->tf_eip = (int)curpcb->pcb_onfault; goto out; } break; case T_TSSFLT: /* * PSL_NT can be set in user mode and isn't cleared * automatically when the kernel is entered. This * causes a TSS fault when the kernel attempts to * `iret' because the TSS link is uninitialized. We * want to get this fault so that we can fix the * problem here and not every time the kernel is * entered. */ if (frame->tf_eflags & PSL_NT) { frame->tf_eflags &= ~PSL_NT; goto out; } break; case T_TRCTRAP: /* trace trap */ if (frame->tf_eip == (int)IDTVEC(lcall_syscall)) { /* * We've just entered system mode via the * syscall lcall. Continue single stepping * silently until the syscall handler has * saved the flags. */ goto out; } if (frame->tf_eip == (int)IDTVEC(lcall_syscall) + 1) { /* * The syscall handler has now saved the * flags. Stop single stepping it. */ frame->tf_eflags &= ~PSL_T; goto out; } /* * Ignore debug register trace traps due to * accesses in the user's address space, which * can happen under several conditions such as * if a user sets a watchpoint on a buffer and * then passes that buffer to a system call. * We still want to get TRCTRAPS for addresses * in kernel space because that is useful when * debugging the kernel. */ if (user_dbreg_trap() && !(curpcb->pcb_flags & PCB_VM86CALL)) { /* * Reset breakpoint bits because the * processor doesn't */ load_dr6(rdr6() & 0xfffffff0); goto out; } + + /* + * Malicious user code can configure a debug + * register watchpoint to trap on data access + * to the top of stack and then execute 'pop + * %ss; int 3'. Due to exception deferral for + * 'pop %ss', the CPU will not interrupt 'int + * 3' to raise the DB# exception for the debug + * register but will postpone the DB# until + * execution of the first instruction of the + * BP# handler (in kernel mode). Normally the + * previous check would ignore DB# exceptions + * for watchpoints on user addresses raised in + * kernel mode. However, some CPU errata + * include cases where DB# exceptions do not + * properly set bits in %dr6, e.g. Haswell + * HSD23 and Skylake-X SKZ24. + * + * A deferred DB# can also be raised on the + * first instructions of system call entry + * points or single-step traps via similar use + * of 'pop %ss' or 'mov xxx, %ss'. + */ + if (frame->tf_eip == + (uintptr_t)IDTVEC(int0x80_syscall) || + frame->tf_eip == (uintptr_t)IDTVEC(bpt) || + frame->tf_eip == (uintptr_t)IDTVEC(dbg)) + return; /* * FALLTHROUGH (TRCTRAP kernel mode, kernel address) */ case T_BPTFLT: /* * If KDB is enabled, let it handle the debugger trap. * Otherwise, debugger traps "can't happen". */ #ifdef KDB if (kdb_trap(type, 0, frame)) goto out; #endif break; #ifdef DEV_ISA case T_NMI: #ifdef POWERFAIL_NMI if (time_second - lastalert > 10) { log(LOG_WARNING, "NMI: power fail\n"); sysbeep(880, hz); lastalert = time_second; } goto out; #else /* !POWERFAIL_NMI */ /* machine/parity/power fail/"kitchen sink" faults */ if (isa_nmi(code) == 0) { #ifdef KDB /* * NMI can be hooked up to a pushbutton * for debugging. */ if (kdb_on_nmi) { printf ("NMI ... going to debugger\n"); kdb_trap(type, 0, frame); } #endif /* KDB */ goto out; } else if (panic_on_nmi == 0) goto out; /* FALLTHROUGH */ #endif /* POWERFAIL_NMI */ #endif /* DEV_ISA */ } trap_fatal(frame, eva); goto out; } /* Translate fault for emulators (e.g. Linux) */ if (*p->p_sysent->sv_transtrap) i = (*p->p_sysent->sv_transtrap)(i, type); ksiginfo_init_trap(&ksi); ksi.ksi_signo = i; ksi.ksi_code = ucode; ksi.ksi_addr = (void *)addr; ksi.ksi_trapno = type; if (uprintf_signal) { uprintf("pid %d comm %s: signal %d err %x code %d type %d " "addr 0x%x esp 0x%08x eip 0x%08x " "<%02x %02x %02x %02x %02x %02x %02x %02x>\n", p->p_pid, p->p_comm, i, frame->tf_err, ucode, type, addr, frame->tf_esp, frame->tf_eip, fubyte((void *)(frame->tf_eip + 0)), fubyte((void *)(frame->tf_eip + 1)), fubyte((void *)(frame->tf_eip + 2)), fubyte((void *)(frame->tf_eip + 3)), fubyte((void *)(frame->tf_eip + 4)), fubyte((void *)(frame->tf_eip + 5)), fubyte((void *)(frame->tf_eip + 6)), fubyte((void *)(frame->tf_eip + 7))); } KASSERT((read_eflags() & PSL_I) != 0, ("interrupts disabled")); trapsignal(td, &ksi); #ifdef DEBUG if (type <= MAX_TRAP_MSG) { uprintf("fatal process exception: %s", trap_msg[type]); if ((type == T_PAGEFLT) || (type == T_PROTFLT)) uprintf(", fault VA = 0x%lx", (u_long)eva); uprintf("\n"); } #endif user: userret(td, frame); KASSERT(PCB_USER_FPU(td->td_pcb), ("Return from trap with kernel FPU ctx leaked")); userout: out: return; } static int trap_pfault(frame, usermode, eva) struct trapframe *frame; int usermode; vm_offset_t eva; { vm_offset_t va; struct vmspace *vm; vm_map_t map; int rv = 0; vm_prot_t ftype; struct thread *td = curthread; struct proc *p = td->td_proc; if (__predict_false((td->td_pflags & TDP_NOFAULTING) != 0)) { /* * Due to both processor errata and lazy TLB invalidation when * access restrictions are removed from virtual pages, memory * accesses that are allowed by the physical mapping layer may * nonetheless cause one spurious page fault per virtual page. * When the thread is executing a "no faulting" section that * is bracketed by vm_fault_{disable,enable}_pagefaults(), * every page fault is treated as a spurious page fault, * unless it accesses the same virtual address as the most * recent page fault within the same "no faulting" section. */ if (td->td_md.md_spurflt_addr != eva || (td->td_pflags & TDP_RESETSPUR) != 0) { /* * Do nothing to the TLB. A stale TLB entry is * flushed automatically by a page fault. */ td->td_md.md_spurflt_addr = eva; td->td_pflags &= ~TDP_RESETSPUR; return (0); } } else { /* * If we get a page fault while in a critical section, then * it is most likely a fatal kernel page fault. The kernel * is already going to panic trying to get a sleep lock to * do the VM lookup, so just consider it a fatal trap so the * kernel can print out a useful trap message and even get * to the debugger. * * If we get a page fault while holding a non-sleepable * lock, then it is most likely a fatal kernel page fault. * If WITNESS is enabled, then it's going to whine about * bogus LORs with various VM locks, so just skip to the * fatal trap handling directly. */ if (td->td_critnest != 0 || WITNESS_CHECK(WARN_SLEEPOK | WARN_GIANTOK, NULL, "Kernel page fault") != 0) { trap_fatal(frame, eva); return (-1); } } va = trunc_page(eva); if (va >= KERNBASE) { /* * Don't allow user-mode faults in kernel address space. * An exception: if the faulting address is the invalid * instruction entry in the IDT, then the Intel Pentium * F00F bug workaround was triggered, and we need to * treat it is as an illegal instruction, and not a page * fault. */ #if defined(I586_CPU) && !defined(NO_F00F_HACK) if ((eva == (unsigned int)&idt[6]) && has_f00f_bug) return (-2); #endif if (usermode) goto nogo; map = kernel_map; } else { /* * This is a fault on non-kernel virtual memory. If either * p or p->p_vmspace is NULL, then the fault is fatal. */ if (p == NULL || (vm = p->p_vmspace) == NULL) goto nogo; map = &vm->vm_map; /* * When accessing a user-space address, kernel must be * ready to accept the page fault, and provide a * handling routine. Since accessing the address * without the handler is a bug, do not try to handle * it normally, and panic immediately. */ if (!usermode && (td->td_intr_nesting_level != 0 || curpcb->pcb_onfault == NULL)) { trap_fatal(frame, eva); return (-1); } } /* * If the trap was caused by errant bits in the PTE then panic. */ if (frame->tf_err & PGEX_RSV) { trap_fatal(frame, eva); return (-1); } /* * PGEX_I is defined only if the execute disable bit capability is * supported and enabled. */ if (frame->tf_err & PGEX_W) ftype = VM_PROT_WRITE; #if defined(PAE) || defined(PAE_TABLES) else if ((frame->tf_err & PGEX_I) && pg_nx != 0) ftype = VM_PROT_EXECUTE; #endif else ftype = VM_PROT_READ; if (map != kernel_map) { /* * Keep swapout from messing with us during this * critical time. */ PROC_LOCK(p); ++p->p_lock; PROC_UNLOCK(p); /* Fault in the user page: */ rv = vm_fault(map, va, ftype, VM_FAULT_NORMAL); PROC_LOCK(p); --p->p_lock; PROC_UNLOCK(p); } else { /* * Don't have to worry about process locking or stacks in the * kernel. */ rv = vm_fault(map, va, ftype, VM_FAULT_NORMAL); } if (rv == KERN_SUCCESS) { #ifdef HWPMC_HOOKS if (ftype == VM_PROT_READ || ftype == VM_PROT_WRITE) { PMC_SOFT_CALL_TF( , , page_fault, all, frame); if (ftype == VM_PROT_READ) PMC_SOFT_CALL_TF( , , page_fault, read, frame); else PMC_SOFT_CALL_TF( , , page_fault, write, frame); } #endif return (0); } nogo: if (!usermode) { if (td->td_intr_nesting_level == 0 && curpcb->pcb_onfault != NULL) { frame->tf_eip = (int)curpcb->pcb_onfault; return (0); } trap_fatal(frame, eva); return (-1); } return ((rv == KERN_PROTECTION_FAILURE) ? SIGBUS : SIGSEGV); } static void trap_fatal(frame, eva) struct trapframe *frame; vm_offset_t eva; { int code, ss, esp; u_int type; struct soft_segment_descriptor softseg; char *msg; #ifdef KDB bool handled; #endif code = frame->tf_err; type = frame->tf_trapno; sdtossd(&gdt[IDXSEL(frame->tf_cs & 0xffff)].sd, &softseg); if (type <= MAX_TRAP_MSG) msg = trap_msg[type]; else msg = "UNKNOWN"; printf("\n\nFatal trap %d: %s while in %s mode\n", type, msg, frame->tf_eflags & PSL_VM ? "vm86" : ISPL(frame->tf_cs) == SEL_UPL ? "user" : "kernel"); #ifdef SMP /* two separate prints in case of a trap on an unmapped page */ printf("cpuid = %d; ", PCPU_GET(cpuid)); printf("apic id = %02x\n", PCPU_GET(apic_id)); #endif if (type == T_PAGEFLT) { printf("fault virtual address = 0x%x\n", eva); printf("fault code = %s %s%s, %s\n", code & PGEX_U ? "user" : "supervisor", code & PGEX_W ? "write" : "read", #if defined(PAE) || defined(PAE_TABLES) pg_nx != 0 ? (code & PGEX_I ? " instruction" : " data") : #endif "", code & PGEX_RSV ? "reserved bits in PTE" : code & PGEX_P ? "protection violation" : "page not present"); } printf("instruction pointer = 0x%x:0x%x\n", frame->tf_cs & 0xffff, frame->tf_eip); if ((ISPL(frame->tf_cs) == SEL_UPL) || (frame->tf_eflags & PSL_VM)) { ss = frame->tf_ss & 0xffff; esp = frame->tf_esp; } else { ss = GSEL(GDATA_SEL, SEL_KPL); esp = (int)&frame->tf_esp; } printf("stack pointer = 0x%x:0x%x\n", ss, esp); printf("frame pointer = 0x%x:0x%x\n", ss, frame->tf_ebp); printf("code segment = base 0x%x, limit 0x%x, type 0x%x\n", softseg.ssd_base, softseg.ssd_limit, softseg.ssd_type); printf(" = DPL %d, pres %d, def32 %d, gran %d\n", softseg.ssd_dpl, softseg.ssd_p, softseg.ssd_def32, softseg.ssd_gran); printf("processor eflags = "); if (frame->tf_eflags & PSL_T) printf("trace trap, "); if (frame->tf_eflags & PSL_I) printf("interrupt enabled, "); if (frame->tf_eflags & PSL_NT) printf("nested task, "); if (frame->tf_eflags & PSL_RF) printf("resume, "); if (frame->tf_eflags & PSL_VM) printf("vm86, "); printf("IOPL = %d\n", (frame->tf_eflags & PSL_IOPL) >> 12); printf("current process = %d (%s)\n", curproc->p_pid, curthread->td_name); #ifdef KDB if (debugger_on_panic) { kdb_why = KDB_WHY_TRAP; frame->tf_err = eva; /* smuggle fault address to ddb */ handled = kdb_trap(type, 0, frame); frame->tf_err = code; /* restore error code */ kdb_why = KDB_WHY_UNSET; if (handled) return; } #endif printf("trap number = %d\n", type); if (type <= MAX_TRAP_MSG) panic("%s", trap_msg[type]); else panic("unknown/reserved trap"); } /* * Double fault handler. Called when a fault occurs while writing * a frame for a trap/exception onto the stack. This usually occurs * when the stack overflows (such is the case with infinite recursion, * for example). * * XXX Note that the current PTD gets replaced by IdlePTD when the * task switch occurs. This means that the stack that was active at * the time of the double fault is not available at unless * the machine was idle when the double fault occurred. The downside * of this is that "trace " in ddb won't work. */ void dblfault_handler() { #ifdef KDTRACE_HOOKS if (dtrace_doubletrap_func != NULL) (*dtrace_doubletrap_func)(); #endif printf("\nFatal double fault:\n"); printf("eip = 0x%x\n", PCPU_GET(common_tss.tss_eip)); printf("esp = 0x%x\n", PCPU_GET(common_tss.tss_esp)); printf("ebp = 0x%x\n", PCPU_GET(common_tss.tss_ebp)); #ifdef SMP /* two separate prints in case of a trap on an unmapped page */ printf("cpuid = %d; ", PCPU_GET(cpuid)); printf("apic id = %02x\n", PCPU_GET(apic_id)); #endif panic("double fault"); } int cpu_fetch_syscall_args(struct thread *td, struct syscall_args *sa) { struct proc *p; struct trapframe *frame; caddr_t params; long tmp; int error; p = td->td_proc; frame = td->td_frame; params = (caddr_t)frame->tf_esp + sizeof(int); sa->code = frame->tf_eax; /* * Need to check if this is a 32 bit or 64 bit syscall. */ if (sa->code == SYS_syscall) { /* * Code is first argument, followed by actual args. */ error = fueword(params, &tmp); if (error == -1) return (EFAULT); sa->code = tmp; params += sizeof(int); } else if (sa->code == SYS___syscall) { /* * Like syscall, but code is a quad, so as to maintain * quad alignment for the rest of the arguments. */ error = fueword(params, &tmp); if (error == -1) return (EFAULT); sa->code = tmp; params += sizeof(quad_t); } if (p->p_sysent->sv_mask) sa->code &= p->p_sysent->sv_mask; if (sa->code >= p->p_sysent->sv_size) sa->callp = &p->p_sysent->sv_table[0]; else sa->callp = &p->p_sysent->sv_table[sa->code]; sa->narg = sa->callp->sy_narg; if (params != NULL && sa->narg != 0) error = copyin(params, (caddr_t)sa->args, (u_int)(sa->narg * sizeof(int))); else error = 0; if (error == 0) { td->td_retval[0] = 0; td->td_retval[1] = frame->tf_edx; } return (error); } #include "../../kern/subr_syscall.c" /* * syscall - system call request C handler. A system call is * essentially treated as a trap by reusing the frame layout. */ void syscall(struct trapframe *frame) { struct thread *td; struct syscall_args sa; register_t orig_tf_eflags; int error; ksiginfo_t ksi; #ifdef DIAGNOSTIC if (ISPL(frame->tf_cs) != SEL_UPL) { panic("syscall"); /* NOT REACHED */ } #endif orig_tf_eflags = frame->tf_eflags; td = curthread; td->td_frame = frame; error = syscallenter(td, &sa); /* * Traced syscall. */ if ((orig_tf_eflags & PSL_T) && !(orig_tf_eflags & PSL_VM)) { frame->tf_eflags &= ~PSL_T; ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGTRAP; ksi.ksi_code = TRAP_TRACE; ksi.ksi_addr = (void *)frame->tf_eip; trapsignal(td, &ksi); } KASSERT(PCB_USER_FPU(td->td_pcb), ("System call %s returning with kernel FPU ctx leaked", syscallname(td->td_proc, sa.code))); KASSERT(td->td_pcb->pcb_save == get_pcb_user_save_td(td), ("System call %s returning with mangled pcb_save", syscallname(td->td_proc, sa.code))); syscallret(td, error, &sa); } Index: stable/10 =================================================================== --- stable/10 (revision 333369) +++ stable/10 (revision 333370) Property changes on: stable/10 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r333368